Job Search Results

383 listings were found that matched your search words: Keywords: Electronic ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2020/07/02 Thursday 12:39PM Pacific Time by ContractJobHunter. )

Listings 1 - 383

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2608 - CABIN ELEC. SYS. INTEGRATOR - cv, word doc only

Description:
Support production and troubleshoot cabin systems on aircraft when required, to minimize issues impact on customer and/or in production.

Document the issues in order to allow a fast resolution including the analysis of electrical schematics and technical requirements as well as the interaction with the different systems suppliers.

Integrate, test and troubleshoot cabin systems such as the Cabin Management, Entertainment, Camera, Lighting or Security.

Work with different functions to plan, organize and run system development tests.

Provide visibility daily to your supervisor on the progress of the testing, the production support and the issue encounter.

Support other departments such as Production, Customer Support, Program Office and Product Planning.

Support change requests made by the Production team as well as change proposals made by customers.

Prepare the required documents, such as technical specifications, block diagrams, functional test engineering requirements (FTER) and test definition sheets (TDS).

Manage, review and approve the deliverables of the Electrical System Suppliers.

Prepare systems definition documentation such as ESSDs and wiring diagram and certification documentation for cabin systems.

Some travel may be required to support production in Client sites outside of the city.

Electrical or software engineering bachelor degree and at least three (3) years of relevant experience in aircraft testing and troubleshooting;

**This position is also open to New Grads in Electrical Engineering**

Cabin systems experience is an asset,

Familiar with FAR 25 requirements and the qualification rules pertaining to avionics/electrical systems.

Working experience using XML, embedded system programming, SNMP, HTML 5 and personal electronic device application is an asset.

Working experience with IP addressing verification, network topology (including wireless LAN), troubleshooting network tools (e.g Wireshark), telephony (SIP), voice over ip (VOIP) and quality of service (QoS) is an asset.

Have experience in dealing with a supplier base.

Have a working experience using AutoCAD, ECAD, CATIA and MS Office.

Must be bilingual (English and French), both written and spoken.

Must be able to work under minimum supervision, enjoy teamwork and have project organization skills.

Must also demonstrate initiative, a strong sense of responsibilities and good technical judgment.

Individuals having a previous experience in testing and integration of interior systems for business aircraft will be preferred.

Position is for evening or night or weekend shift with 3 day shift ; 1 Evening shift; 1 night Shift; 1 Weekend shift.
 
Job Number: 2608
Job Location: Canada
Rate: 53.00 US
Per Diem: Paid - 3 Mths only
Overtime: Paid - NOT at 1.5
Duration: 6+ Mths
Start Date: ASAP
Input Date: 03/30/2020
Last Updated: 03/30/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

ASIC/FPGA (VHDL) Design Engineer

Description:
Our client is seeking a motivated candidate to work on implementation of digital logic for space applications. This position is based at our Space Park campus in Redondo Beach, CA. Duties include VHDL design of ASIC and/or FPGA logic, verification via simulation and emulation (lab testing), synthesis, and timing analysis.


Additional responsibilities include:

Designs and develops circuits used in electronic devices. device evaluation and characterization, test box design, prototype construction and checkout, and determination of wafer fabrication processes. Prepares test methods and specifications; analyzes equipment to establish operating data and conducts experimental tests; provides finished device approval; and prepares customer application information

Qualifications:

 Basic Qualifications:

- Bachelor’s Degree in Electrical or Computer Engineering from an accredited institution with minimum of 14 years of experience with Logic Design in VHDL or Verilog; or 12 years of experience with Masters Degree
- Must have the ability to obtain and maintain an active Government clearance

Preferred Qualifications:

- Hands-on lab experience with testing of digital hardware is highly desired
- Experience with Digital Signal Processing (DSP)
- 15 years or more of digital Logic Experience
- Security Clearance (any level)
 
Job Number: x20200041
Job Location: Redondo Beach, CA
Rate: $90/hr
Duration: up to 1 year
Input Date: 04/22/2020
Last Updated: 07/02/2020
Firm Name: XPEERANT
Attention: Woody Arnold
Address: 4308 N GARFIELD AVE
City, State: LOVELAND, CO 80538
Phone: 970/282-9287
Email: woody@xpeerant.com
Website: www.xpeerant.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Advanced Engineering Technician

Description:
Advanced Engineering Technician

Job ID # 2020-10768

Contract Opportunity

Location: Bloomington, MN

Industry: Aerospace & Defense

Minimum Clearance: Secret

Minimum Education: Associate’s Degree

Minimum Experience: 2 years



What You’ll Do:
•Support engineering development activities such as design, test, check-out, modification, fabrication and assembly of prototype electronic systems, experimental design circuitry, or specialized test equipment.
•May also be asked to develop test specifications and procedures and are sometimes tasked with report preparation and documentation of technical issues and are expected to provide clear and precise technical documentation.
•Managing lab assets, using electronic lab test equipment to troubleshoot hardware, software and system issues.
•Construct, troubleshoot, calibrate, adjust, test, diagnose, and maintain equipment, components, devices, or systems.
•Perform complex system level troubleshooting to component level.
•Support engineering activities such as design, test, check-out, modification, fabrication and assembly of prototype electromechanical systems, experimental design circuitry, laser/light transmission devices or specialized test equipment.
•Open to new ideas and can serve as a champion for change and acts to support change when directed from management.
•Construct, troubleshoot, calibrate, adjust, test, diagnose, and maintain equipment, components, devices, or systems.
•Perform a variety of equipment/process operations involving an application or technical skills in a specific area (electrical, software, manufacturing, etc.).
•Interpret complex engineering drawings, diagrams and schematics, and understand the necessary interfaces.
•Perform complex system level troubleshooting to component level.
•Direct others in the design and construction of tooling and fixtures to accomplish unique tasks.
•Demonstrate leadership and initiative in actions.
•May develop test specifications and procedures.
•May prepare reports, documentation/specifications as required.



What You’ll Need:
•Secret clearance required
•Works from schematics, diagrams, written and verbal descriptions, layouts or defined plans to perform testing, checkout and trouble-shooting functions
•As a skilled specialist, completes tasks with minimal supervision in resourceful and effective ways
•Lift up to 40 pounds
•Understand practical applications of material properties
•As a skilled specialist, completes tasks in resourceful and effective ways
•Strong knowledge in specialized functions
•Minimal supervision required
•Work may be done without established procedures
•Strong proficiency in application and interpretation of complex specifications, requirements, standards and practices
•Strong knowledge in specialized functions
•Preferred: ◦Solder experience with fine pitch surface mount technologies
◦Experience with high speed digital electronics
◦Previous experience in the defense or aerospace industry
◦Working knowledge of Military Standards for environmental testing and electromagnetic compatibility testing




*U.S. Citizenship is required by law, regulation, executive order, or government contract.



Education & Experience:
•Associate’s degree combined with 3+ years of relevant work experience.



What to Expect:
•Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
•Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.



Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.





Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/
 
Job Number: 2020-10768
Job Location: Bloomington,, MN
Input Date: 02/03/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Advanced FPGA Design Engineer

Description:
Advanced FPGA Design Engineer

Job ID # 2020-10518

Contract Opportunity

Location: Bloomington, MN

Industry: Aerospace & Defense

Minimum Education: Bachelor’s Degree

Minimum Experience: 2 years



What You’ll Do:
•Design, develop and test military electronic equipment and systems at company including: avionics mission computers, stores management systems, signal and radar processing systems and related equipment.
•Responsible for design, verification, associated documentation for FPGA development, design revision control and archival of design file.
•Implements detailed FPGA design approach, execute place/route, timing closure and confidence level testing.
•Participates in the generation of FPGA test and verification plans establishing functional criteria to ensure requirements are correctly implemented.
•Participates in the execution of verification plans and assists in development unit testing.

What You’ll Need:
•Verilog expert and familiar with System Verilog
•Familiar with high speed network switch design approaches
•Experience designing high speed interfaces and complex memory designs
•Design experience integrating 3rd party IP
•Design experience with protocols such as DDR, 10G Ethernet, Fibre Channel and PCIe in networking applications
•Familiar with embedded micro-processing systems
•Used constrained random verification approaches
•Successfully participated in design or verification activities to ensure implementation and verification of all requirements
•Familiar with Mentor Questa
•Board and Module digital logic design experience and been a member of a successful integration team
•Expertise with various scripting languages



*U.S. Citizenship is required by law, regulation, executive order, or government contract.



Education & Experience:
•Bachelor’s degree in electrical or computer engineering combined with 2+ years of relevant work experience; or Master’s degree.



What to Expect:
•Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
•Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.





Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.





Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/
 
Job Number: 2020-10815
Job Location: Bloomington, MN
Input Date: 02/05/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Advanced MBSE Systems Engineer

Description:
Advanced MBSE Systems Engineer

Job ID # 2020-10786

Contract Opportunity

Location: Bloomington, MN

Industry: Defense

Clearance Requirement: Ability to Obtain - Secret

Minimum Education: Bachelor’s Degree

Minimum Experience: 5 years



What You’ll Do:
•The Advanced MBSE Systems Engineer performs modeling and simulation, requirements analysis, requirements definition, requirements management, functional analysis, performance analysis, system design, trade studies, systems integration and test (verification).
•Formulate operational concepts.
•Perform mission, functional, cost-benefit, and risk analysis.
•Select systems architecture.
•Prepare specifications for corporate operating systems to ensure designs meet applicable specifications.
•The Advanced Systems Engineer may also perform testing, verification, and validation of radar sensor and signal processing algorithm requirements and performance



What You’ll Need:
•This position requires the ability to obtain a Secret Security Clearance within a reasonable time following hire.
•Systems Modeling (UML, SysML, or similar).
•Model Driven Development using Rhapsody or MagicDraw.
•Experience with DOORS or similar tools.
•Knowledge of radar performance analysis techniques.
•Demonstration, Integration, and Verification planning.
•Integration and Test of Software and Hardware systems.
•Strong written and verbal communications skills.
•Preferred:◦Electronic Warfare (EW) or Electronic intelligence (ELINT) experience.
◦Working knowledge of radar exciters/receivers, scanned arrays, and radar sensing techniques.
◦Single and multi-processor/core environment.


*U.S. Citizenship is required by law, regulation, executive order, or government contract.



Education & Experience:
•Bachelor's Degree in Systems Engineering, a related specialized area or field is required (or equivalent experience) combined with a minimum of 5 years of relevant experience; or Master's degree with a minimum of 3 years of relevant experience.
•Agile experience preferred.

What to Expect:
•Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
•Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.



Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.





Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/
 
Job Number: 2020-10786
Job Location: Bloomington, MN
Input Date: 02/03/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler - no clearance FL

Description:
167594 Job Title: Assembler

Work Site Address: Clearwater, FL 34677
Job Number: 3279-1
Max Pay Rate: $22.00/hr
Start Date: 2/24/2020
End Date: 2/5/2021
Position Type: Contract

Job Summary:
Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on cabinet assemblies which includes installing cables, subassemblies and circuit card assemblies. Ability to work from diagrams and drawings, make initial layouts, and use hand and/or power tools.

Roles and Responsibilities
May conduct quality inspections on processing line in accordance with quality specifications. May disassemble, modify, rework, reassemble, and test production or prototype assemblies and subassemblies according to specifications. Expected to read and comprehend assembly parts lists, assembly drawings and any related reference documentation. Builds in accordance with IPC-620 quality standards. Troubleshooting of process parameters to improve yield.

Qualifications and Education Requirements
• One year experience in IPC-620
• Must have good manual dexterity
• Strong mechanical build experience accurately interpreting written work instruction, drawings, sketches, and wiring diagrams.
• Experienced with working in an Electro Static Discharge (ESD) environment
• Experienced with working with hand tools used in the assembly of cables and cabinet assemblies
• Experienced with working with hand tools
• Knowledge of cable termination including familiarity with crimping specifications and use of both automated and hand crimping tools
• Good written and oral communication skills
• Good computer skills with ability to work from electronic work instructions
• Use of manual and automatic wire strippers.

Skills: Category Name Required Importance Experience
Technical Skills Knowledge of Basic Mechanical/Electrical Concepts No 3 < 1 Year Qty 1 position Pay rate $15-$22/hr. Will not get max pay rate without extensive, stable experience. Degree is not required. Supervisor is looking for candidates who are mechanically inclined.
 
Job Number: LMRMS-3729-1
Job Location: Oldsmar, FL
Rate: 22/hr max
Duration: 12 months
Input Date: 02/06/2020
Last Updated: 02/19/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler / 2nd shift - no clearance FL

Description:
167470 Job Title: Assembler

Work Site Address: Clearwater, FL 34677
Job Number: 3123-1
Max Pay Rate: $18.00/hr
Start Date: 2/5/2020
End Date: 1/24/2021
Position Type: Contract

Job Summary:
• Uses microscope to verify correct part placement and orientation, manually align parts before soldering and perform post re-flow inspection and touch-up.
• Able to identify and touch up poor wetted solder joints, solder voids / insufficient solder, solder shorts/ bridges, misaligned parts / leads, tombstoned and or billboarded components and any out solder defects that may occur during the SMT operation.

Must be able to read instructions and identify standard SMT components.
• Must be able to work in a fast-paced environment where some overtime may be required.
• Must be able to sit for long periods of time and focus on tedious tasks.
• Must have basic computer skills and have the ability to use several windows based programs as part of your daily routine.
• Obtain all necessary information to perform job assignment and report any discrepancies to appropriate personnel
• Plan, lay out, assemble, wire and solder complete electrical/electronic and mechanical equipment and apparatus such as PC boards, controls and control panels, assemblies.
• Read and interpret schematics and wiring diagrams to perform point-to-point assembly, where assemblies and subassemblies require wiring and soldering of large masses of wires in confined spaces
• Perform electrical/electronic and mechanical assembly tasks working as a member of an assembly team as assigned

Qualifications and Education Requirements
Mandatory
• Must have a minimum of 1 year of experience in a similar position and have above average surface mount and fine pitch soldering skills.
• Ability to work under a microscope for long periods of time to perform inspection / solder repair.
• Must be able to read and interpret assembly drawings.
• Strong communication and organizational skills and ability to work in a team oriented environment.

Desired
• Experience working in a LEAN Manufacturing environment
• Strong leadership, mentoring and training aptitude
• IPC-610 Certification
• IPC J-STD-001 Certification

Preferred Skills
Skills: Category Name Required Importance Experience
Technical Skills Surface Mount Technology Yes 5 1 - 2 Years

Qty 3 positions
This is for 2nd shift
 
Job Number: LMRMS-3123-1
Job Location: Clearwater, FL
Rate: 18/hr max
Duration: 12 months
Input Date: 01/23/2020
Last Updated: 02/21/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler / soldering required - no clearance FL

Description:
167138 Job Title: Assembler

Work Site Address: Clearwater, FL 34677
Job Number: 2855-1
Max Pay Rate: $22.00/hr
Start Date: 1/13/2020
End Date: 1/1/2021
Position Type: Contract

Job Summary:
Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on cable assemblies. Ability to work from diagrams and drawings, make initial layouts, and use hand and/or power tools.

May conduct quality inspections on processing line in accordance with quality specifications. May disassemble, modify, rework, reassemble, and test production or prototype assemblies and subassemblies according to specifications. Expected to read and comprehend assembly parts lists, assembly drawings and any related reference documentation. Builds in accordance with IPC-620 quality standards. Troubleshooting of process parameters to improve yield.

Qualifications and Education Requirements
• One year experience in IPC-620
• Must have good manual dexterity
• Strong mechanical build experience accurately interpreting written work instruction, drawings, sketches, and wiring diagrams.
• Experienced with working in an Electro Static Discharge (ESD) environment
• Experienced with working with hand tools used in the assembly of cables and subassemblies
• Experienced with working with hand tools
• Knowledge of cable termination including familiarity with crimping specifications and use of both automated and hand crimping tools
• Good written and oral communication skills
• Good computer skills with ability to work from electronic work instructions
• Use of manual and automatic wire strippers.
Must have Soldering Experience

Skills: Category Name Required Importance Experience
Technical Skills Soldering Yes 5 2 - 4 Years

Qty 4 positions
Must have Soldering Experience, a test will be issued within the first 3 days of training.
Pay Rate $15-$22/hr. Will not get max pay rate without extensive experience
 
Job Number: LMRMS-2855-1
Job Location: Oldsmar, FL
Rate: 15-22/hr DOE
Duration: 12 months
Input Date: 02/14/2020
Last Updated: 05/01/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler B

Description:
Assembler B

Job ID # 2020-10765

Contract Opportunity

Location: El Segundo, CA

Industry: Aerospace & Defense

Minimum Education: High School Diploma / GED

Minimum Experience: 1 year



What You’ll Do:
•Works from test and planning documents, circuit and product diagrams, equipment manuals, and verbal and written instructions.
•Lays out and determines standard methods and sequences to test and troubleshoot complex digital electronic subassemblies, slices and units by performing operations such as inspections, wirechecks, component verifications, and functional testing under various environmental conditions.
•Sets up the test configuration by making all cable connections between the item-under-test and the station.
•Secures connectors to the proper torque where required.
•Reviews test data for failures and fills out paperwork to report failures.
•Operates commercial and custom test equipment including computer-controlled test stations, oscilloscopes, digital multimeters, logic analyzers, chart recorders, and thermal chambers.
•Uses, interprets and critiques circuit and product drawings, and test documents such as specifications and procedures.
•Uses application software on test stations that run under various operating systems, and able to execute batch files.
•Troubleshoots flight hardware under the guidance of an engineer.
•Fills out paperwork to rework the hardware.
•Troubleshoots and repairs test stations under the guidance of an engineer.
•Sets up test stations for usage by following instructions and diagrams in equipment documents. May involve finding missing equipment and cables.
•Reviews and prepares test data for unit selloff.
•Uses computer application software such as word processing and spreadsheets.
•Performs incidental related duties as assigned or required.
•Takes units through environmental testing at other facilities by scheduling use of facility, moving equipment to test facility, setting up unit, and testing the unit during the environmental exposure.



*U.S. Citizenship is required by law, regulation, executive order, or government contract.



Education & Experience:
•High School Diploma / GED combined with 1+ years of relevant work experience.



What to Expect:
•Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
•Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.



Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.





Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/
 
Job Number: 2020-10765
Job Location: El Segundo, CA
Input Date: 02/03/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionic Technician - 2nd shift / C-130 required aircraft modification experience require / no clearance SC

Description:
167551 Job Title: Avionic Technician

Work Site Address: Greenville, SC 29605
Job Number: 3235-1
Max Pay Rate: $29.00/hr
Start Date: 2/17/2020
End Date: 2/17/2021
Position Type: Contract

Job Summary:
Performs a variety of duties in the electronic, mechanical, electro-mechanical, and/or optical areas. Installs wire harness on aircraft, to include clamping, tying and terminating. Performs continuity checks.

Works from schematics, engineering drawings and written or verbal instructions. Operates related equipment; conducts tests and reports data in prescribed format.

Qualifications and Education Requirements
Modification experience required
C-130 experience required
Modification installation experience

Skills: Category Name Required Importance Experience
Areas of Expertise C-130 Yes 1 4 - 6 Years

Qty 1 position
This is a full time 2nd shift position.
 
Job Number: JEG-3235-1
Job Location: Greenville, SC
Rate: 29/hr max
Duration: 12 months
Input Date: 02/03/2020
Last Updated: 03/02/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionic Technician - no clearance URGENT SC

Description:
167249 Job Title: Avionic Technician

Work Site Address: Greenville, SC 29605
Job Number: 2948-1
Max Pay Rate: $29.00/hr
Start Date: 1/16/2020
End Date: 8/14/2020
Position Type: Contract

Job Summary:
Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas.

Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, engineering drawings and written or verbal instructions. Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions.
Installs wire harnesses in aircraft to include routing and termination.

Qualifications and Education Requirements
Modification experience STRONGLY desired
Must have previous aircraft modification experience.

Preferred Skills
Skills: Category Name Required Importance Experience
Areas of Expertise Aircraft Modification Yes 1
Areas of Expertise C-130 No 1

Qty 10 positions
Contract length likely to extend
MORE RESUMES NEEDED
Modification experience STRONGLY desired

Manager motivated to make selections quickly
 
Job Number: JEG-2948-1
Job Location: Greenville, SC
Rate: 29/hr max
Duration: 8 months plus extension
Input Date: 02/10/2020
Last Updated: 04/01/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionic Technician - no clearance URGENT SC

Description:
166688 Job Title: Avionic Technician

Work Site Address: Greenville, SC 29605
Job Number: 2464-1
Max Pay Rate: $29.50/hr
Start Date: 11/18/2019
End Date: 7/31/2020
Position Type: Contract

Job Summary:
Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, engineering drawings and written or verbal instructions.

Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions.

Skills: Category Name Required Importance Experience
Areas of Expertise Aircraft Modification No 1 2 - 4 Years
Areas of Expertise C-130H No 1 2 - 4 Years

Qty 8 positions
This is an URGENT request.
 
Job Number: JEG-2464-1
Job Location: Greenville, SC
Rate: 29.50/hr max
Duration: 8 months plus extension
Input Date: 01/13/2020
Last Updated: 03/04/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionic Technician / Aircraft MODIFICATION experience REQUIRED - no clearance URGENT SC

Description:
167479 Job Title: Avionic Technician

Work Site Address: Greenville, SC 29605
Job Number: 3125-1
Max Pay Rate: $29.00/hr
Start Date: 2/10/2020
End Date: 7/10/2020
Position Type: Contract

Job Summary:
Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas.

Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, engineering drawings and written or verbal instructions. Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions.

Qualifications and Education Requirements
Aircraft MODIFICATION experience REQUIRED
P-3 experience a plus but not required

Skills: Category Name Required Importance Experience
Areas of Expertise P-3 No 1 1 - 2 Years

Qty 4 positions
 
Job Number: JEG-3125-1
Job Location: Greenville, SC
Rate: 29/hr max
Duration: 5 months +
Input Date: 04/29/2020
Last Updated: 05/01/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Certification Engineer

Description:
Support the verification and test of high-performance Avionics hardware and systems.
• Perform system and component-level avionics requirements validation and verification
• Document failure mode, effects, and critical analysis (FMECA) cases and pursue corrective actions
• Write and update technical documentation for certification
• Capture and communicate technical risks and waivers
• Analyze test and flight data, to help with verification activities
• Detailed electronics design and analysis experience
• Experience with DO-160, MIL-STD-1540, or SMC-S-016 Environmental test standards
• Familiarity with ARP4754A, DO-254 and DO-178 and related Design processes
• Experience / exposure to IBM DOORs tool
 
Job Number: 4545
Job Location: multiple
Rate: open
Per Diem: possible
Overtime: possible
Duration: Contract
Start Date: 2 weeks
Input Date: 05/02/2019
Last Updated: 04/08/2020
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic Avellino
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Cabler Assembler - no clearance CO

Description:
Job Title: Cabler Assembler

Work Site Address: Colorado Springs, CO 80909
Job Number: 2475-1
Max Pay Rate: $17.50/hr
Start Date: 11/4/2019
End Date: 2/3/2020
Position Type: Contract

Job Summary:
This position will perform a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and sub-assemblies such as cables and harnesses.

• Production of wire harness and cable assemblies using hand and/or power tools (including specialized crimpers, drills, soldering tools, screwdrivers, torque wrenches, wire strippers, precision measuring instruments, etc.)
• Daily cable and harness techniques (wire cutting, stripping, cable prep and layup, connectorization, crimping, soldering, jacketing, braiding, molding, use of lacing tape and spot ties for open wire bundles, testing, etc.)
• Comfortable building Cat5e/Cat6 cables
• Ability to read and understand the customer drawings, parts list, wire list, specifications and assembly router for step-by-step instructions on how to manufacture the wire harness and cable assembly
• Make continuity checks on work in process and completed assemblies
• Conduct in-process inspections on product in accordance with quality specifications
• Work collaboratively with Management team to correct and improve upon any documents related to the assembly process

Qualifications and Education Requirements
No Degree is Required
Minimum requirements
• Ability to read and comprehend procedures written in English
• Displayed comprehension of assembly practices and technologies
• Familiarity with assembly tools, processes, and terminology
• Experience with proper pinning, crimping, and stripping methods
• Ability to distinguish colors is required
• Technical knowledge of electronics and mechanical designs; must be able to read and understand customer drawings
• Understanding of the application and functioning of test equipment
• Good verbal and written communication skills
• Individual must be able to work at the pace necessary to meet customer demands with minimal supervision
• Understanding or experience with regulatory requirements and general safety
• Self-motivated team player.
Additional requirements
• IPC Solder and Rework Certified a plus
• Minimum 3 years’ experience with assembly of electrical wiring harnesses or equivalent assembly experience
• Lift up to 30 pounds.

Skills: Category Name Required Importance Experience
Soft Skills Communication Skills Yes 1 2 - 4 Years
Technical Skills Ability to Read Engineering Drawings Yes 1 2 - 4 Years
Technical Skills Manufacturing Experience Yes 1 2 - 4 Years
Technical Skills Wireharness Print Reading Yes 2 2 - 4 Years


Qty 2 positions
 
Job Number: LMRMS-2475-1
Job Location: Colorado Springs, CO
Rate: 17.50/hr max
Duration: 4 months +
Input Date: 10/24/2019
Last Updated: 04/06/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Communications Contractor FL

Description:
167538 Job Title: Communications Contractor

Work Site Address: Orlando, FL 32825
Job Number: EBS-003
Max Pay Rate: $19.00/hr
Start Date: 1/31/2020
End Date: 1/31/2021
Position Type: Contract


Job Summary:
This position will be challenged with projects focused on communication and dissemination of information such as policy, procedures, trends and directives of communications within the security organizations, through various forms of media, examples: Connect Security electronic newsletter, web pages, memos/messages, talking points and other pertinent materials.

Critical writing and editing of security procedures on technical content. Strong communications skills will be needed in this position. This position is writing intensive and, thus, requires strong writing and editing skills. The position also requires an ability to work with senior leadership and manage multiple projects; to think strategically and develop and execute well-rounded plans; and to provide internal communication guidance to various audiences while ensure spelling, punctuation, capitalization, and grammar contained with security communications is correct. Other projects within the Security function may be assigned.

Qualifications and Education Requirements
Degree in Marketing and/or Communications
• BA Degree is required.
• Strong experience in public speaking
• Excellent presentation skills
• Demonstrated effective project management skills
• Effective writing and verbal communications skills
• Strategic, critical thinker
• Effective interpersonal skills and demonstrated ability to work with employees and leaders at all levels of the organization.
• Ability to handle multiple priorities under deadlines
• Agile, adaptable self-starter

• Proficiency with various Microsoft Office Suite applications
• Experience in writing communications and memos
• Ability to perform updates on web pages

Qty 1 position

7:30-5:00 (9/80 schedule)
The hiring manager is interested in recent college grads (less than 1 year) with a degree in Marketing and/or Communications. The work experience does not need to align to the degree.

Possible temp to hire
 
Job Number: EBS-003ATO
Job Location: Orlando, FL
Rate: 19/hr max
Duration: 12 months
Input Date: 02/03/2020
Last Updated: 02/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract Administrator Analyst

Description:
We have an Excellent Contract to Hire position for a Contract Administration Analyst to join a leading Company located in the Redmond, WA area.
** Position requires U.S Citizenship.

Job Responsibilities:
Assists in the administration of major contracts.
Supports proposal development and negotiations and associated contract awards, change orders, and/or modifications.
Responsible for preparing a variety of reports, documentation, justification, and recommendations as directed.
Coordinates with a multi-disciplined Program Management team for preparation of proposal documents in response to external customers' proposal requests.
Performs review and evaluation of terms and conditions of contracts for contractual requirements and risks.
Coordinates with the Program Management team and Accounts Receivable to provide timely invoicing and payment for assigned contracts.
Interfaces with internal and external customers to answer inquiries, conducts fact-finding discussions, and interprets contract terms for problem resolution.
Prepares weekly status reporting to management of work in progress, prepares responses to internal data calls as required.
Performs contract closeout activities to include physical and electronic filing and interaction with multi-functional teams.
Organizes and assumes responsibility for the maintenance of files, records, and other documents.
Stays current on changes to government regulations and industry practices.

Basic Hiring Criteria:
Bachelor’s degree in an appropriate discipline with three (3) years’ experience, or an equivalent combination of education and experience.

Desirable Qualifications:
Familiarity or working knowledge of Federal Acquisition Regulation, Defense Federal Regulations (DFAR), related federal and state legislation and regulations, and the Uniform Commercial Code.
Prior contract administration experience within the Aerospace & Defense industry.
Must have excellent knowledge of personal computer applications, including word processing, spreadsheet, and database.
Possess substantial knowledge of standard office procedures, filing systems, related office machines, and general aspects of the job.
Must have excellent oral and written communication skills to interact effectively with individuals representing outside organizations and or within the company.
Ability to work well under constantly changing deadlines and priorities expected.
Basic understanding of operations control and proposal evaluation desired.
Full understanding and application of contract administration principles, concepts, practices, and standards a plus
 
Job Number: 39833
Job Location: Redmond, WA
Rate: 31.25
Per Diem: NO
Overtime: YES
Duration: 6 Month +
Start Date: ASAP
Input Date: 02/12/2020
Firm Name: TAD PGS INC
Attention: Maria Gomez
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer 5

Description:
Design and Analysis Engineer 5

Location: Oklahoma City, OK
Duration: 6+ Months

Description:
Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects. Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications. Leads testing and validation work on complex system designs to assure that operational and functional requirements are met. Works with other to develop program test strategies. Manages performance of critical suppliers to ensure system integration and compliance with requirements. Conducts program independent reviews and reports results to program leadership. Provides critical support of fielded hardware and software over the entire product lifecycle. Leads research into technology advances for potential application to company business needs. Makes recommendations for technology investments. Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.

OKC Electrical Power Group is seeking senior electrical power engineers. The candidate will mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for client Military Aircraft, Military Derivative Aircraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, B-1B, B-2, B-52 and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft power systems on the various platforms.


Other job responsibilities may include:
- Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects.
- Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications.
- Leads testing and validation work on complex system designs to assure that operational and functional requirements are met.
- Works with other to develop program test strategies.
- Manages performance of critical suppliers to ensure system integration and compliance with requirements.
- Conducts program independent reviews and reports results to program leadership.
- Provides critical support of fielded hardware and software over the entire product lifecycle.
- Leads research into technology advances for potential application to company business needs. Makes recommendations for technology investments.
- Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.
- Works under consultative mentorship.

Basic Qualifications (Required Skills and Experience)
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 14 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+9 years' related work experience, Master+12 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.


Skill Code: 622-Electrical Systems Design
 
Job Location: Oklahoma City, OK
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 months
Start Date: ASAP
Input Date: 11/15/2019
Last Updated: 03/02/2020
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Elect Design and Analy Engr 4

Description:
Elect Design and Analy Engr 4

Location: El Segundo, CA
Duration: 12+ Months

Description:
The Electronics Products Shared Integrated Product Group at The Client Company's Satellite Development Center in El Segundo, California is seeking an experienced electrical engineer whose area of expertise is electronics test and automated test system design. Our automated test systems include those designed for testing RF/microwave/millimeter-wave electronics, power electronics, and digital electronics for space applications. Units requiring automated test range from single-board computers to switching networks, modems, and microwave electronics used in space-based applications. The person in this position will be responsible for test system architecture definition, hands-on test development and test system design, verification, validation and documentation, as well as providing project management and leadership for less senior personnel.

Applicable skills for this position range from test software development to electronics hardware specification and design. Experience in control, analog, digital or power supply circuit design is desired. Software/coding experience using LabView, Test Stand, C/C#, Python, FPGA Verilog/VHDL, and Matlab Signal Processing is a plus. Understanding intermodulation distortion, phase noise, and spurious measurement test techniques and familiarity with S-parameters is also a plus. Strong writing and presentation skills are required.

Responsibilities:
- Leading design teams of 2 to 10 people in automated test system development activities with cost and project schedule accountability
- Development of test system requirements and verification methodologies
- Make recommendations for test equipment procurement
- Hands-on design, documentation and design leadership of automated test system development projects
- Lead STE design reviews showing adherence to STE development processes
- Supporting test system proposals and bids
- Resolution of anomalies occurring during integration and test of a test system, and also during subsequent delivery and test system usage
- Participate in STE personnel development through mentoring and group presentations

Skill Code: 608-Elect Design and Analysis Engr-General

Education / Experience:
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.
 
Job Location: El Segundo, CA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 months
Start Date: ASAP
Input Date: 11/15/2019
Last Updated: 03/02/2020
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Job Title: Electrical Engineer
Location: Riviera Beach, FL
Duration: 1 year with possible extension

Job Description: Researches, develops, designs, and tests electrical components, equipment, systems, and networks for underwater vehicles and systems.

This position requires experience in selecting and designing electronic assemblies. The position also entails requirements review, component selection, creation of design packages, and generation of test procedures.
The engineer will be responsible for supporting the design development through the release cycle. The position requires research, design, development, and testing of complex electrical designs including documentation development, hands-on test and troubleshooting, and formal documentation of the electrical design. Programs require broad electrical support, including issue resolution to distributed I/O architectures, RF systems, remote test station equipment, fiber optics interconnect, network troubleshooting, and power distribution systems. Work across disciplines
during integration and test activities is required. Experienced with underwater vehicles desired.
 
Job Location: Riviera Beach, FL
Rate: OPEN
Per Diem: YES
Overtime: YES
Duration: 1 Year
Start Date: ASAP
Input Date: 11/19/2019
Last Updated: 03/02/2020
Firm Name: ICONMA LLC
Attention: Rohit
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Power

Description:
A Power/Electrical Engineer job in Anaheim, California is currently available through Belcan. This is a contract role with one of aerospace clients. You will be responsible for design and development of electrical power equipment for shipboard applications and design support of other applications. To be considered for this role, you will need to have a Bachelor of Science degree in Electrical Engineering, Power Engineering or equivalent from a four-year college or university; and 5 to 10 years experience in the design of power conversion equipment or related equivalent experience and/or training.

Power/Electrical Engineer Job duties:
* Provide power electronics engineering support for design, development, integration, operation and sustaining of electrical components, equipment and systems under moderate supervision.
* Participate in all stages of development from design through manufacturing support and system integration.
* Interpret customer specifications to define requirements for power electronics circuit and systems design.
* Starting from conceptual phase, provide detail design of switch mode power converters and inverters, transformer rectifiers, control loops and/or magnetic components.
* Perform engineering analysis of power electrical circuits and systems.
* Perform hardware bring-up and integration and support power conversion systems hardware / software integration.
* Provide complete documentation, product verification and part's list.
* Write product and test specifications.
* Provide sustaining engineering on existing products supporting manufacturing and test departments.
* Provide technical support for manufacturing, production and fielded equipment.

Qualifications:
* Bachelor of Science degree (B. S.) in Electrical Engineering, Power Engineering or equivalent from a four-year college or university; and 5 to 10 years' experience in the design of power conversion equipment or related equivalent experience and/or training.
* Must have design familiarity with power conversion topologies and electrical components IGBTs, MOSFETs and SCRs used in power switching applications.
* Circuit analysis applications, PSPICE preferred.
* Magnetics design and closed control loop design experience, a plus.
* Must be able to work as a key member of the design team with other Power Design Engineers, Digital and Analog Engineers, System Engineers and Software Engineers.
* Proven effective communication with Senior Project Management and customer representatives is essential.

If you are interested in this Power/Electrical Engineer job in Anaheim, California, please apply via the 'apply now' link provided.  Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.


 
Job Number: 298328
Job Location: Anaheim, CA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 01/09/2020
Last Updated: 05/01/2020
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/489-4300
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - multiple openings - TX CA GA

Description:
167404 Job Title: Electrical Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2915-1
Max Pay Rate: $64.00/hr
Start Date: 1/21/2020
End Date: 4/23/2021
Position Type: Contract

Job Summary:
Accepting applications for multiple Electronics Engineering positions within Mission Systems hardware and/or software disciplines including: Radar; Electronic Warfare (EW); Communications, Navigation and Identification (CNI); Radio Frequency (RF); Electro Optical / Infrared Radiation (EO/IR); Signal Processing; Embedded Mission Processors; Displays; and/or Weapons.

Responsibilities may include: Researching, designing, developing, and testing a variety of electronic equipment and systems, including radar and radiation detection equipment; radio, television and other communications equipment and systems; circuitry components; analog and digital computers; and control and test equipment.

Responsibilities may also include: Electronic system design, development and integration; supplier management and interaction; Laboratory test and verification; requirements management; change management; planning; unit and system level verification; system performance validation; setup and acceptance testing; affordability, part obsolescence mitigation.
Applies extensive technical expertise, and has full knowledge of other related disciplines. Develops technical solutions to complex problems which require the regular use of ingenuity and creativity.
Position may involve occasional travel and/or off-shift work.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS

Qty 10 positions
Multiple positions available in Fort Worth, TX; Palmdale, CA; and Marietta, GA.
 
Job Number: JE-2915-1ATO
Job Location: Fort Worth, Palmdale, Marietta, TX, CA, GA
Rate: 64/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 04/27/2020
Last Updated: 05/01/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer / Instrumentation Engineer - Clearance CA

Description:
167083 Job Title: Electrical Engineer / Instrumentation Engineer

Work Site Address: Palmdale, CA 93599
Job Number: 2678-1
Max Pay Rate: $100.00/hr
Start Date: 11/22/2019
End Date: 2/9/2021
Position Type: Contract

Job Summary:
Responsible for supporting multiple programs on technical and schedule issues with respect to aircraft instrumentation.

Will be responsible for the design, installation, and operational support activities for data acquisition. This includes designing instrumentation systems, releasing engineering documents, work instructions, supporting airworthiness documentation, monitoring fabrication activities, and supporting aircraft checkout and flight operations. The applicant will be the engineering liaison for flight test and instrumentation modification activities.

The candidate should be familiar with integrating various sensors into a data acquisition system. The position will be responsible for ensuring recorded data is correct.

This position may require travel and odd, weekend or overtime shift work on an as-necessary basis.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS
Basic Qualifications
• Bachelor’s degree in Electrical/Electronics or Computer Engineering or related discipline.
• Experience developing instrumentation systems and sensor integration methods used on multiple aircraft
• Experience developing data acquisition systems for air vehicles

Experience with the following:
- Microsoft Office
- Electronics and electronics troubleshooting techniques and tools, including multi-meters, oscilloscopes, logic analyzers, signal generators, spectrum analyzers, and/or other common lab test equipment

Desired skills
• Using various CAD programs such as Catia, Autocad, etc.
• Using general test equipment such as oscilloscopes and spectrum analyzers.
• Understanding of IRIG 106
• Avionics bus protocols including Mil-Std-1553, ARINC-429, IEEE 1394, Ethernet and Fiber Channel
• GPS and IRIG time standards
• Video protocols and compression

The applicant must have excellent organizational and communications skills
• Applicant should have knowledge of Systems Engineering practices and concepts
• Experience with or knowledge of calibration methods for test and evaluation of both mechanical measurements and electronic sensors
• Skilled in the conversion of digital data sets to engineering units and interpretation of data for validity and error determination
• Familiarity with military aircraft technical data, maintenance practices, flight operations, military stores and munitions is a plus

Qty 2 positions
 
Job Number: JE-2678-1S
Job Location: Palmdale, CA
Rate: 100/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 12/19/2019
Last Updated: 04/23/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer / Instrumentation Engineer - Clearance CA

Description:
167093 Job Title: Electrical Engineer / Instrumentation Engineer

Work Site Address: Palmdale, CA 93599
Job Number: 2657-1
Max Pay Rate: $90.00/hr M
Start Date: 12/9/2019
End Date: 2/26/2021
Position Type: Contract

Job Summary:
Responsible for performing pre-flight of aircraft instrumentation.

Attend pre and post mission briefings. Provide mission control room support. Direct instrumentation modification via T2 Mod process. Direct and trouble shoot instrumentation installations utilizing electrical drawings. Provide modification to electrical drawings utilizing Visio/Catia.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS

- Analog and digital circuit design and analysis.
- Signal conditioning, transducers, and data acquisition.
- Ability to interpret electrical drawings.
- Extensive knowledge of instrumentation system designs supporting fast paced flight test programs.
- Prior experience with LM Aero Flight Test Instrumentation processes, procedures, and tools.
- CATIA, CCD, AutoCAD or similar design tools.
- Working knowledge of electronics and experience in electronics troubleshooting techniques and tools, including multi-meters, oscilloscopes, logic analyzers, signal generators, spectrum analyzers, and other common laboratory equipment.
- Microprocessor firmware design and embedded system design
- Aircraft instrumentation concepts including: Selecting transducers and signal conditioning, Calibration methods, Data buses, Telemetry, Solid state recording and digital video recording / compression, Aircraft wiring , Avionics bus protocols including MilStd-1553, ARINC-429, IEEE 1394, Ethernet and Fiber Channel.
- Flight test instrumentation protocols and standards
- GPS and IRIG time standards
- Real time and post test data processing Flight Test Experience
- Proficient communication skills

Qty 2 positions
 
Job Number: JE-2657-1S
Job Location: Palmdale, CA
Rate: 90/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 12/17/2019
Last Updated: 02/28/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer MA

Description:
167668 Job Title: Electrical Engineer

Work Site Address: Marion, MA 02738
Job Number: 3311-1
Max Pay Rate: $85.00/hr
Start Date: 2/24/2020
End Date: 2/12/2021
Position Type: Contract

Job Summary:
Researches, develops, designs, and tests electrical components, equipment, systems, and networks. Designs electrical equipment, facilities, components, products, and systems for commercial, industrial, and domestic purposes.

Candidate must be highly motivated Test Station Development Engineer (TSDE) lead, looking to be converted into a permanent employee. The selected candidate will lead and provides individual contributor efforts for the development of test stations for the MK-48 Guidance and Control Warhead Electronics Systems (WES) development effort. This person will build and lead a team of other engineers.

For each test station to be developed, the candidate must work with the current engineering team to identify find the best solution, minimizing risk, complying with allocated cost and schedule, present the need for team members to functional level managers, lead the teams, and produce a robust and completely documented test stations.

The successful candidate needs to also be a very strong technical leader, hands-on contributor with electrical engineering development experience, a creative thinker, have the capability to build stations compliant with all specified requirements, within the allotted cost and schedule. A history of development, across a diversified team of engineers, suppliers, quality, manufacturing, etc., in all programmatic phases, is required.

For each test station development, the person will either own, or delegate the following activities:
1. Control Account Manager (CAM) with Earned Value Management in accordance with (ANSI/EIA-748)
2. Performing a combined role of technical engineering team leadership and Earned Value Management (technical, cost, and schedule integration/analysis/reporting)
3. Test station HW and SW development
4. Managing risk and opportunity
5. Conforming to Defense First Article and Qualification testing

It is highly desirable if the person is expert with Control Account Management particularly for defense contractors. Some of these CAM responsibilities/delegations include schedule planning and monthly measuring each test station development. Additional responsibilities (or delegations) for each station will include actual cost collection, variance analysis and resultant corrective action, and estimating costs at completion.
This position will require frequent meetings at the program office level, with customers, and with senior management as well as with the engineering team. Frequent bid and proposal work will be required, often times requiring considerably more than 40 work hours per week.


Qualifications and Education Requirements
BS+16 YRS or MS+14 YRS
The candidate should be energetic, able to work independently, yet thrive in a team environment and have sound theoretical and practical experience.
Other required skills are outstanding verbal and written skills, in a clear and concise manner; the ability to present in a favorable and impactful way to large audiences including internal management and external customers.

Skills: Category Name Required Importance Experience
Areas of Expertise Circuit Design No 1 < 1 Year Areas of Expertise Electrical Troubleshooting No 1 < 1 Year Soft Skills Strong Leadership Skills No 1 < 1 Year Technical Skills Develop/execute test plans No 1 < 1 Year Technical Skills Electrical Testing No 1 < 1 Year Technical Skills Electronic Testing No 1 < 1 Year Technical Skills Knowledge of Basic Mechnical/Electrical Concepts No 1 < 1 Year Technical Skills Knowledge of Complex Mechanical/Electrical Concepts No 1 < 1 Year Technical Skills Knowledge of Electrical Technology No 1 < 1 Year Technical Skills Read Electrical Schematics No 1 < 1 Year Qty 1 position Hourly Pay Rate Range $55-$85 Please note the list of Skills that are Highly Preferred
 
Job Number: LMRMS-3311-1ATO
Job Location: Marion, MA
Rate: 55-85/hr DOE
Per Diem: pd split possible
Duration: 12 months
Input Date: 02/13/2020
Last Updated: 02/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer in El Segundo, CA

Description:
Elect Design and Analy Engr 4

Location: El Segundo, CA
Duration: 10+ Months

Description:
Leads analysis of customer and system requirements and development of architectural approaches and detailed specifications for various electronic products. Leads development of high-level and detailed designs consistent with requirements and specifications. Leads reviews of testing and analysis activity to assure compliance to requirements. Identifies, tracks and statuses technical performance measures to measure progress and ensure compliance with requirements. Leads activities in support of Supplier Management with make/buy recommendations and other technical services. Coordinates engineering support throughout the lifecycle of the product. Plans research projects to develop concepts for future product designs to meet projected requirements. Works under minimal direction.

Education / Experience:
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

Skill Code: 676-Digital and Analog Circuits and Pwr Supply Design
 
Job Location: El Segundo, CA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 10 months
Start Date: ASAP
Input Date: 12/06/2019
Last Updated: 03/02/2020
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

Electrical Engineering Test Tech

Description:


PRIMARY FUNCTION:
The Electrical Engineering Test Technician will perform configuration and acceptance testing of complex electronic systems/assemblies, by applying principles and theories of electronics, electrical circuitry, engineering mathematics, electronic and electrical testing.
This position follows a 4x10 compressed workweek schedule.
JOB DUTIES:
 
  • Test product, using standard test equipment and procedures, and analyze results to evaluate performance and determine need for adjustment.
  • Assemble, test, and maintain circuitry or electronic components according to engineering instructions, technical manuals, and knowledge of electronics, using hand and power tools.
  • Read schematic drawings and engineering instructions for assembling electronics units, applying knowledge of electronic theory and components.
  • Adjust and replace defective or improperly functioning circuitry and electronics components, using hand tools and soldering iron.
  • Maintain documentation of testing and equipment operation.



 



 





 



BASIC QUALIFICATIONS:
 
  • Ability to read and interpret schematics, assembly drawings, procedure manuals, parts lists and wire data lists.
  • Knowledge of analog and digital symbol identification
  • Knowledge of test practices and procedures.
  • Personal computer skills required to configure and load software
  • Ability to operate test equipment such as: ohmmeters, digital voltmeters, generators, counters, oscilloscopes, and personal computers.
  • LINUX operating system experience able to run detailed procedures to configure Firmware and load Software, Test and Troubleshoot, RF Experience, and run Acceptance Test Procedures.  


EDUCATION AND EXPERIENCE:
 
  • Associate's degree (A. A.) or equivalent in Electronic Technology or related field of study preferred.  
  • 2 years related experience and/or training; or equivalent combination of education and experience.


QUALIFIED APPLICANTS MUST MEET FOLLOWING REQUIREMENTS:
 
  • Valid State Driver’s License
  • Must be DoD Clearance Eligible


PHYSICAL ACTIVITY:
Climbing, Balancing, Stooping, Kneeling, Crouching, Crawling, Reaching, Standing, Walking, Pushing, Pulling, Lifting, Fingering, Grasping, Feeling, Hearing, Talking, and Repetitive Motions




 


 
Job Number: 1910099812
Job Location: Hunt Valley, MD
Per Diem: Yes
Duration: 12 months
Input Date: 03/18/2019
Last Updated: 07/02/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Chris O\'Connor
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002jXr7QAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Wire Harness Engineer

Description:
*This is a full time, 1 year contract position located in York, PA*

*Alternate locations available to work from, Minneapolis or San Jose*

*Per diem split is available for out of the area applicants*



We are seeking a contract Electrical Engineer specializing in vehicle electronics and wire harness designing. We are working on optimizing the design the wiring harnesses and cable assemblies which will integrated into military ground vehicles, such as tanks and armored personnel carriers.



Daily duties will consist of specifying/design of components from requirements and work on through modeling, simulation and analysis or test that requirements are met. Will work on creating engineering documentation (specs, ICDs, design documents, and technical/test reports) and complete technical data packages. Handle cost estimating, scheduling assigned electrical design projects; work on ECOs and change proposals as well as monitoring to ensure manufacturing, and delivery of components schedules are met. Applicant will assist drafters / designers in creating clear and releasable documents.



Required:
*3 years’ experience designing electrical & wire harnesses systems for military vehicles.
*Working knowledge of Visio Technical, Pro-E, Pro-Cable and/or CADDS 5
*Understanding of military electrical connectors and cabling specs such as SAEJ1939 CANBus/CANalyzer.

*Familiar with C4ISR equipment and vision enhancement systems including cameras and displays.

*Working knowledge of vehicle positioning systems.

*Experience using electrical test equipment including oscilloscopes, meters, power supplies.
*Knowledge of MIL-STD 1553,MIL-STD 100

*4 year degree in Engineering





Pluses:
*Experience integrating military communication/antenna systems including BFT, SINCGARS, DAGR, CREW2
 
Job Number: 314
Job Location: Sterling Hts, MI
Rate: DOE
Per Diem: yes split
Input Date: 02/07/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrocincs Packaing Design Engineer

Description:
Global defense contractor in MD is looking for a seasoned engineer for a long term contract assignment.

Basic Qualifications:
• Minimum 7+ years' experience in microelectronics packaging design or related field (which may include technologies such as organic PWBs, multilayer ceramic packages, flip chip, 2.5D/3D packaging, MCM, QFN, IMA, etc.)
• Proficient with NX CAD software
• Proficient with design and routing of high density Printed Wiring Boards (PWBs)
• Able to communicate and collaborate effectively as a member of an integrated product design team
• Bachelor's degree in mechanical engineering or related field
• US Citizen, with ability to obtain a Secret clearance

Desired Qualifications:
• Proficient with Mentor Expedition software
• Familiar with heat transfer methodologies for electronics, and thermal analysis tools
• Familiar with manufacturing and test methodologies of microelectronics assemblies and PWBs
• Master's degree in mechanical engineering or related field
 
Job Number: 5867
Job Location: Baltimore, MD
Rate: Open
Per Diem: No
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 02/04/2020
Firm Name: HEPCO INC
Attention: Tom Lee
Address: 160 PEHLE AVE STE 202
City, State: SADDLE BROOK, NJ 07663-5227
Phone: 201/843-4400
800 Phone: 800/656-0099
Fax Phone: 201/843-0025
Website: www.hepcoinc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic Manufacturing Engineer NY

Description:
Job title: Electronic Manufacturing Engineer
Request number: 6309
Number of openings: 1
Position location: East Aurora - NY
Employment type: Contract
OT exempt: No

Shift: 1st
Education Requirement: BS/BA
Driving on company time?: No
Maximum Hourly Pay Rate: 60
Start Date: 02/17/2020
Tentative End Date: 07/20/2020

Job Description
Function:
1. The Electronics Process Engineer is a focal point for resolving all questions/problems concerning the manufacture and assembly of electronics development and production hardware. This includes concurrent engineering of circuit board and controller design, and the processes / equipment to manufacture Circuit Card Assemblies, Cable Assemblies and Controllers.
2. The incumbent initiates changes and deviations to the design or specification requirements.
3. They are the primary contact for customers, vendors, and internal Moog personnel on all technical processing problems and questions.
4. The incumbent frequently functions in the manner of a program manager, on technical problems, coordinating Moog resources for the solution of a problem and communicating timely information to the affected groups within Moog and to the customer/supplier levels.
5. The incumbent provides Moog SDG Cross facility support
6. The incumbent provides Electronics Contract Manufacturer support (for Electronics Buy programs)

Essential job functions:
1. Provide production assembly/test instructions, training and monitoring to maintain production.
2. Evaluate, request, and implement equipment to meet production requirements.
3. Assure and maintain design integrity, producibility and quality in production products.
4. Provide process engineering support as required to other Moog departments to maintain and improve quality, schedule, and cost objectives.
5. Complete electronics manufacturing readiness deliverables: Provide Routings, Op sheets, Assembly Worksheets, machine programming, solder profiling, tooling and fixturing to A&T Operations
6. Provide on demand support to A&T Operations as required from kit pull thru stock
7. Address stop work issues in a timely fashion– address non-standard work (e-HR and NC), communicating timely information to the affected groups within Moog and to the customer/supplier levels.
8. Prepare and present electronics manufacturing information at PDR, CDR and MRR

Required skills:
• Bachelor of Science Degree in Electrical, Mechanical, Chemical or Industrial Engineering + one year relevant technical experience
• Alternately, a Bachelor of Technology Degree in Engineering + five years of relevant technical experience
• Demonstrated strong technical written and verbal communication skills
• Knowledge in areas of Root Cause / Corrective Action, LEAN and Project Planning
• Must be a US citizen, capable of obtaining a government security clearance
• Certification to J-STD-001, IPC-A-610 and NASA 8739 is desirable

Scope:
Electronics manufacturing methods – Surface Mount Technology, Plated Through Hole Technology, soldering, cleaning, polymeric applications, cable assembly, box build, rework and repair
Machine Programming utilizing Aegis CircuitCam software tool
Electronics Processing capital planning, specifications, acquisition and qualification
Electronics DFX – Review designs throughout the design cycle in regards to Design For Manufacturability, Design For Assembly, Design For Test and Design For Cost
Electronics assembly/processing materials and chemicals expertise
Education:

Other Requirements
****Pre-Screen Questions Required w/ Submittals****

Pre-Screen Questions – Electronic Manufacturing Engineer
1. What experience do you have where class 3 aerospace electronics are built and tested
2. What electronics industry standard certifications do you currently have or did have – IPC J-STD-001, Space Addendum, IPC-WHMA-A-620, IPC-A-610, IPC-A-600, NASA 8739, WHMA
3. What electronics assembly and/or test machine programming applications have you used
4. What automated soldering process development experience do you have
5. Have you written electronics assembly and/or test work instructions


Position needed for 4-6 months at this point
 
Job Number: MB-6309
Job Location: East Aurora, NY
Rate: 60/hr max
Per Diem: pd split possible
Duration: 5 months +
Input Date: 02/12/2020
Last Updated: 02/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Electronic Test Technician

Description:
PDS Tech is currently recruiting for Electronic Test Technicians as well as various other positions in Hollister, CA.  

The Technician conducts complex destructive and non-destructive testing in accordance with written procedures such as Acceptance Test Procedures (ATPs) or Qualification Test Procedures (QTPs).   This position also requires the ability to interpret dimensional drawings and perform test setups. 

  • Responsible for design verification and acceptance testing of pyrotechnic and electronic products.
  • Must be familiar with test equipment (ie: oscilloscopes, multimeters, environmental chambers).
  • Reviews system-level Acceptance Test Procedures for a wide variety of pyrotechnic and electrical devices.
  • Troubleshooting, calibration and adjustments to test equipment, components and systems.
  • Correct malfunctions by making adjustments or replacing parts or components
  • Use small hand and power tools along with various measuring and testing devices.
  • Perform appropriate duties associated with specialized IT project-based activities.
  • Participate in process improvement meetings and team 5S activities.

  • 3+ years’ experience as a Test Technician preferably in an Aerospace and/or Defense environment preferred
  • Test experience involving vibration, shock and pressure vs. time
  • Working knowledge in interpreting dimensional drawings and test procedures 
  • Capable of lifting 40 pounds
  • High School/GED Required
  • Must be able to work overtime

 
Job Number: 1910106748
Job Location: Hollister, CA
Duration: 0 months
Input Date: 09/24/2019
Last Updated: 07/02/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Pam Zack
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fJj4QAE&URLSource=cjhunter

Electronics Technician

Description:
PDS Tech is seeking Electronics Technicians / Assemblers for frequent openings in Clearwater, FL. 

In your role, you will:
  • Assemble fabricated aircraft parts at floor stations.
  • Assemble electrical or electronic systems and support structures.
  • Install components, units, subassemblies, wiring and assembly casings using rivets, bolts, soldering and micro-welding equipment.
  • Hand solder components under a microscope.  Fine pitch soldering experience is required.
  • Use hand tools and work instructions to assemble units according to product specifications.
  • Use engineering diagrams/Mil-Standard specs (IPC) and schematics in a production environment.

For more information please call Michael at (813) 426-9917 or email mcoonce@pdstech.com 
Qualifications:
  • Fine pitch soldering experience is required. (watch maker certifications)
  • 4 years experience in electronics assembly.
  • High School Diploma required.
  • Associates degree in Electronics or Engineering Technology desired.

Desired Certifications:

  • IPC J-STD-001:  Soldered Electrical and Electronic Assemblies
  • IPC-7711/7721: Rework and Repair of Electronic Assemblies
  • IPC/WHMA-A-620:  Cable and Wire Harness Assemblies

Opportunity for contract-to-hire based on employee performance, attendance, dependability and Client’s business needs. ​

Point of Contact:  Michael Coonce at (813) 426-9917 or email mcoonce@pdstech.com 
 
 
Job Number: 1810083538
Job Location: Clearwater, FL
Per Diem: No
Duration: 12 months
Input Date: 12/04/2019
Last Updated: 07/02/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mJYHAA2&URLSource=cjhunter

Electronics Technician

Description:
PDS Tech is seeking Electronics Technicians / Assemblers for frequent openings in Clearwater, FL. 


In your role, you will:
  • Assemble electrical or electronic systems and support structures.
  • Install components, units, subassemblies, wiring and assembly casings using rivets, bolts, soldering and micro-welding equipment.
  • Hand solder components under a microscope.  Fine pitch soldering experience is required.
  • Use hand tools and work instructions to assemble units according to product specifications.
  • Use engineering diagrams/Mil-Standard specs (IPC) and schematics in a production environment.

Qualifications:
  • Fine pitch soldering experience is required is a plus 
  • 5 years experience in electronics assembly preferred.
  • Must have a High School Diploma or GED
  • Associates degree in Electronics or Engineering Technology desired.

Desired Certifications:

  • IPC J-STD-001:  Soldered Electrical and Electronic Assemblies
  • IPC-7711/7721: Rework and Repair of Electronic Assemblies
  • IPC/WHMA-A-620:  Cable and Wire Harness Assemblies

Opportunity for contract-to-hire based on employee performance, attendance, dependability and Client’s business needs. ​

Please call Clyde at 813-426-9917 or email ccallwood@pdstech.com for more information

 
 
Job Number: 1610047076
Job Location: Clearwater, FL
Per Diem: No
Duration: 12 months
Input Date: 10/22/2018
Last Updated: 07/02/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000026C5mAAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronics Technician FL

Description:
167653 Job Title: Electronics Technician

Work Site Address: Orlando, FL 32819
Job Number: 3325-1
Max Pay Rate: $27.00/hr
Start Date: 3/9/2020
End Date: 3/7/2021
Position Type: Contract

Job Summary:
Consist of engineering hardware fabrication support, troubleshooting, testing and basic Laboratory operations responsibility.

Some climbing on ladders may be required as well as lifting up to 25lbs. These responsibilities will include fabrication of electronic/electrical chassis' and mechanical rack fabrication using development engineering drawings. Candidate must be capable of working independently, discussing technical issues with customers and working with vendors.

Qualifications and Education Requirements
An AA in Electrical or Electronics Engineering is highly preferred.

Preferred Skills
Skills: Category Name Required Importance Experience
Areas of Expertise Testing Yes 8 2 - 4 Years
Soft Skills Ability to meet deadlines Yes 6 2 - 4 Years
Technical Skills ATP Yes 7 2 - 4 Years
Technical Skills Electrical Testing Yes 7 2 - 4 Years
Technical Skills Electronic Testing Yes 7 2 - 4 Years
Technical Skills General Assembly Test System (GATS) software Yes 5 2 - 4 Years
Technical Skills User Acceptance Testing Yes 5 2 - 4 Years

Qty 1 position
Pay rate range is $20-$27
 
Job Number: LMRMS-3325-1
Job Location: Orlando, FL
Rate: 20-27/hr max
Duration: 12 months
Input Date: 02/13/2020
Last Updated: 02/13/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronics Technician MD

Description:
167627 Job Title: Electronics Technician

Work Site Address: Baltimore, MD 21220
Job Number: 3304-1
Max Pay Rate: $35.00/hr
Start Date: 2/25/2020
End Date: 7/3/2020
Position Type: Contract

Job Summary:
Consist of engineering hardware fabrication support, troubleshooting, testing and basic Laboratory operations responsibility.

Some climbing on ladders may be required as well as lifting up to 25lbs. These responsibilities will include fabrication of electronic/electrical chassis' and mechanical rack fabrication using development engineering drawings. Candidate must be capable of working independently, discussing technical issues with customers and working with vendors.

Qualifications and Education Requirements
AA in Electrical or Electronics Engineering is highly preferred.

Skills: Category Name Required Importance Experience
Technical Skills IPC-J-STD Yes 1 2 - 4 Years
Technical Skills IPC-A-610 No 3
Technical Skills IPC-WHMA-A-620 No 2

Qty 1 position
 
Job Number: LMRMS-3304-1ATO
Job Location: Baltimore, MD
Rate: 35/hr max
Duration: 5 months +
Input Date: 02/12/2020
Last Updated: 05/01/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Engineer – Aircraft Structural Modification Support

Description:
PDS Tech, Inc. is seeking an Aircraft Structural Modification Support Engineer in Lexington, MA. 

Aircraft Structural Modification Support
2. Background/Need
Group 108 works to understand air defense issues, in particular, air vehicle survivability, vulnerability of U.S. Air Force (USAF) aircraft to weapons systems, electronic countermeasures, and air surveillance for homeland defense. The focus is on understanding USAF and threat air defense systems through tests and measurements. Test activities include flight, field, and laboratory testing. We operate three airplanes, all highly instrumented and numerous ground systems as needed for test efforts. We also develop new hardware for testing and prototype systems as well as for instrumenting existing sensors. Group 108 requires for one full time Engineer to support the aircraft structural modification project.
3. Position Scope/Job Functions
Candidate will be responsible for the management of a multi-year transformation of a Gulfstream IV-SP into the next Airborne Sensor Test Bed (ASTB). The project entails major airframe modifications including fuselage and wing strengthening, the integration of under wing / centerline instrumentation pods, nose and tail electromagnetic and optical sensors, a sonobuoy or dropsonde release system and major electrical/data infrastructure. Candidate will participate in overseeing vendors performing the necessary aircraft modifications and ensuring that the work is properly executed, documented and delivered on schedule. Support will also include design and conduct of a flight test program to demonstrate compliance with modifications specifications and to obtain FAA approvals for continued operations. Related work will include establishment of a configuration management program and documentation archive to support the aircraft throughout its life.
4. Skills: Required
- Direct program management experience of significant aircraft structural modifications
- Experience with sensor and or mission system integration to turbine powered aircraft
- Experience in the design and conduct of flight test programs for certification of major modifications
- Familiarity with design and conduct of aircraft structural demonstration, stability and control, flutter, handling qualities, and performance flight tests
- Familiarity with the requirements for and development of certification documentation, particularly Flight Manual Supplements
- Subject Matter Expertise with 14 CFR (FAR) Part 91 repair, overhaul, maintenance and modification requirements, Supplemental Type Certificate (STC) processes, and Experimental Type Certificate approval processes
- Working knowledge of 14 CFR (FAR) Part 25 certification requirements, particularly in the areas of damage tolerance analysis and instructions for continuing airworthiness
- Familiarity with Configuration management tools and processes
- Experience with MS Office tools (Word, PowerPoint, Excel and Project)
- Ability to produce and present accurate and timely status reports and presentations both written and oral to all levels of management
- Familiarity with Federal Acquisition Regulations
5. Skills: Preferred
- Experience with FAA certification of modifications designed to carry external stores on
commercial aircraft
- Experience overseeing the structural modification of GIV, GIV-SP or GV Gulfstream aircraft
desired
- Airframe and Powerplant License
- Designated Engineering Representative (DER) with a Structures and Electrical rating
- Designated Airworthiness Representative (DAR) rating is desired
- Demonstrated ability to lead a disparate team of engineers, technicians, and support personnel
towards a common goal
6. Education/Professional Certifications
MS plus three (3) years minimum relevant experience or BS plus five (5) years minimum relevant
experience
7. Laboratory-furnished equipment and information
Office space and a Laboratory desktop computer will be supplied.
8. Place of Performance
Work will be performed at the MIT LL Flight Test Facility, Hanscom Air Force Base, Bedford, MA, Bldg
1715 location. Extensive travel to oversee modification/flight test activities at contractor facilities (US
and Canada) is required. Anticipate approximately 50% travel to vendor locations.
9. Period of Performance (PoP)
Three (3) year period of performance is required.
10. Security
All personnel must successfully pass a Commercial Background Investigation (CBI) and hold at least an
Interim Secret security clearance before receiving facility access.
Will the performance of work require access to classified information? YES
What level of clearance is required? SECRET

Education requirements:
 
  • MS plus three (3) years minimum experience in Aeronautical / Aerospace Engineering with a Structural Focus desired or BS plus five (5) years minimum experience is required.

 
Required Qualifications:
 
  • Direct program management experience of significant aircraft structural modifications
  • Experience with sensor and or mission system integration to turbine powered aircraft
  • Experience in the design and conduct of flight test programs for certification of major modifications
  • Familiarity with design and conduct of aircraft structural demonstration, stability and control, flutter, handling qualities, and performance flight tests
  • Familiarity with the requirements for and development of certification documentation, particularly Flight Manual Supplements
  • Subject Matter Expertise with 14 CFR (FAR) Part 91 repair, overhaul, maintenance and modification requirements, Supplemental Type Certificate (STC) processes, and Experimental Type Certificate approval processes
  • Working knowledge of 14 CFR (FAR) Part 25 certification requirements, particularly in the areas of damage tolerance analysis and instructions for continuing airworthiness
  • Familiarity with Configuration management tools and processes
  • Experience with MS Office tools (Word, PowerPoint, Excel and Project)
  • Ability to produce and present accurate and timely status reports and presentations both written and oral to all levels of management
  • Familiarity with Federal Acquisition Regulations
  • U.S. Citizenship required
  • Ability to obtain and maintain a security clearance

 
Desired Qualifications:
 
  • Experience with FAA certification of modifications designed to carry external stores on commercial aircraft
  • Experience overseeing the structural modification of G-IV, G-IVSP or GV Gulfstream aircraft desired

Airframe and Powerplant License

  • Designated Engineering Representative (DER) with a Structures and Electrical rating
  • Designated Airworthiness Representative (DAR) rating is desired
  • Demonstrated ability to lead a disparate team of engineers, technicians, and support personnel towards a common goal

Personnel possessing an active SECRET clearance is desired. All personnel must successfully pass a Commercial Background Investigation (CBI). In addition, they may begin with an interim clearance but must obtain and maintain a SECRET clearance.

 
 
Job Number: 1910104407
Job Location: Bedford, MA
Duration: 36 months
Input Date: 07/17/2019
Last Updated: 07/02/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GTYtQAO&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Environmental Test Lab Technician CA

Description:
Job Title: Environmental Test Lab Technician

Work Site Address: Chatsworth, CA 91311
Job Number: 6319
Max Pay Rate: 25-28.00
Start Date: 02/17/2020
End Date: 08/24/2020
Position Type: Contract

Job Description:
Independently perform qualification tests and acceptance tests.
•Maintain test logbooks, in a neat and organized manner.
•Assemble test setups, both mechanical and electronic.
•Pump down, monitor, and be responsible for the operation of thermal cycling and thermal vacuum chambers. Including the working with liquid nitrogen.
•Assist in maintaining a clean, safe and orderly work environment.

Qualifications and Education Requirements
The Laboratory Technician must have a broad knowledge base spanning from basic electronics and instrumentation, to mechanical systems and thermal vacuum environments. You must also have practical hands on ability to solder, make connectors as well as the ability to use mechanical tools associated with this job.

• 2- 5 years’ experience in electro mechanical testing.

• A working knowledge of basic electronics.

• Ability to utilize power supplies, digital volt meters, data loggers, oscilloscopes, strip chart recorders, counters, and stepper motor controllers.

• Knowledge of transducers, such torque transducers, encoders and thermal couples.

• Ability to operate thermal cycling chambers and thermal vacuum chambers.

• Mechanical ability to assemble mechanical test setups

The Space and Defense Group in Chatsworth is looking for a Lab Technician. Client produces mechanisms for spacecraft motion control with design and flight heritage expanding over 45 years. With origins from historic programs such as Apollo and Pioneer to present-day satellite programs, brings heritage-based solutions to spacecraft mechanisms technology. The spacecraft mechanisms facility in Chatsworth, California includes a fully-integrated engineering/design, manufacturing and test capability. Moog spacecraft products are flexible to meet customer requirements for a wide breadth of applications ranging from commercial to government flight programs
 
Job Number: MB-6319
Job Location: Chatsworth, CA
Rate: 28/hr max
Duration: 6 months +
Input Date: 02/12/2020
Last Updated: 02/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FPGA / RTL Hardware Engineer

Description:
*This is a full time, 1 year contract to hire position located in Nashua, NH*



We are seeking an electronic hardware engineer who will support and develop FPGA/RTL designs from design to system integration (design, test, troubleshoot) for embedded military/aerospace analog/digital/mixed signal multi-layer circuit card assemblies/applications.



Candidate duties will include RTL coding, VHDL synthetization placement and routing. For the work, Xilinx Vivado and possibly Altera, Microsemi, Lattice FPGAs will be used. Candidate will be responsible for their design, update/create the specs, and create the RTL design (from bottom up) or from a leveraged code block. Candidate will make a standalone testbench for the design to test basic functionality before handing it off the Design Verification team for detailed testing. Once complete, the designed product will go to the lab for testing and debugging.



Required:
*10 years of FPGA or ASIC digital circuit design in RTL/VHDL (RTL designers also considered)
*Experience with Source Control Tools/Bug Tracking; experience working in a lab environment
*Experience with lab Integration, debug, root cause analysis, lab tools.
*BSEE or equivalent
*Active Secret Clearance



Pluses:
*Xilinx Vivado Verilog or System Verilog
*Linux, GIT Bug Tracking tool such as GForge or JIRA
*FPGA verification and validation
*Testing of VHDL source code, DSP PCIE
*Serial interfaces (MIL-STD-1553, ARINC-429, RS422, RS485, etc), backplane buses including VME, PCI, PCIE
 
Job Number: 562
Job Location: Nashua, NH
Rate: $104.00
Per Diem: yes split
Input Date: 02/07/2020
Last Updated: 02/28/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FPGA Engineer

Description:
This position is for a FPGA Verification contractor to work in Space RF Communications Electronics Department. The position will develop verification environment utilizing UVM, run randomized and direct testing to achieve closure on functional and code coverage, trace requirement, performs reviews and audits on the simulation test procedures and test environment. Maintain the desire to stay current in the continuously developing field and to expand knowledge base and skills in FPGA design, verification, and digital hardware engineering.

Required Skills
Minimum 6 years of experience in digital hardware FPGA design and verification
Expertise in HVL and HDL (SystemVerilog, Verilog).
Advanced knowledge of HVL methodology (UVM/OVM/VMM).
Solid verification skills in problem solving, constrained random testing, and debugging.
Experience in scripting languages such as Python.
Experience with SystemVerilog Assertion (SVA).
Experience with source control software such as GIT, svn.
A great teammate with excellent communication skills and the desire to take on diverse challenges.

Desired Skills:
Designing for space application Experience with formal verification Digital signal processing experience
Experience with DDR3/4, PCIe, sRIO, SPI, SpW interfaces
Designing latest Xilinx, Altera, Microsemi FPGAs Programming experience in C/C++
Algorithm verification experience using Matlab/Simulink
 
Job Number: BCCA290658
Job Location: El Segundo, CA
Per Diem: No
Overtime: Possible
Duration: 8 months
Start Date: TBD
Input Date: 02/05/2020
Firm Name: YOH SERVICES
Attention: Bill Carriveau
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/791-1565
800 Phone: 800/298-0666
Website: jobs.yoh.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FPGA/VHDL Electrical Engineer

Description:
*This is a full time, 6 month contract position, located in Wayne, NJ*



We are searching for an FPGA design/verification/test engineer. Candidate will develop requirements, specifications and documentation. Create verification plans using Universal Verification Methodology (UVM), develop RTLs, System Verilog, Test Like You Fly, etc. Candidate will perform design analysis and verifications, Insert ASIC test capabilities, and support ASIC testing.



Required
*5 years’ experience in FPGA electronics designing (PCB Boards).
*Strong HDL skills such as VHDL, Verilog
*Exposure to two or more of the following: RTL definition, verification and design, test insertions, synthesis, Static Timing Analysis, Test Pattern generation.
*Verification methodology experience with tools such as UVM/OVM.
*4 year engineering degree, preferably a BSEE



Pluses:
*Verification methodology experience with tools such as UVM/OVM.
*Experience with Mentor Graphics Modelsim / Questasim or Synopsys backend tools
•Able to program in C, C++, TCL, or scripting in PERL, Bash, Python, Ruby
•Linux experience
 
Job Number: 251
Job Location: Wayne, NJ
Rate: $83.90
Per Diem: yes split
Input Date: 02/06/2020
Last Updated: 03/27/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
Experience developing flight test plans for fixed wing onboard execution on an experimental aircraft in the areas of performance, aerodynamics, powerplant, mechanical systems, or electronic systems
Experience executing test procedures onboard experimental fixed wing test aircraft
Experience performing analysis of post flight data to determine pass/fail
 
Job Number: 20-148303
Job Location: Southeast
Rate: $70.00 per hour
Per Diem: Split
Overtime: Possible
Duration: Year +
Start Date: ASAP
Input Date: 02/11/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
Unique Skills:
Experience developing flight test plans for fixed wing onboard execution on an experimental aircraft in the areas of performance, aerodynamics, powerplant, mechanical systems, or electronic systems
Experience executing test procedures onboard experimental fixed wing test aircraft
Experience performing analysis of post flight data to determine pass/fail

Education and Experience Requirements:
Bachelor's Degree in technical related curriculum applicable to the respective job position or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
5 years Flight Test engineering experience or 10 yrs broad eng experience in several technical disciplines.
Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
Flight Test Engineer Certification may offset one year of experience requirement.


Position Purpose:
Assists with the planning, coordination, test execution, and liaison to engineering supporting the development and production of Gulfstream products and services.

Principle Duties and Responsibilities:
Essential Functions:
1. Perform core roles and responsibilities with some oversight and direction applicable to the complexity of the testing
2. Support testing to including stability & control, flying qualities/characteristics, stall demonstration, performance, powerplant, mechanical systems, pneumatic systems, electrical systems, avionics, cooling/ventilation, icing, and cold/hot weather
3. Work with engineering and test pilots to define test points that are conducted on test aircraft
4. Definition of Instrumentation requirements and communication with instrumentation engineering group to support installation on aircraft to support test requirements
5. Definition of the aircraft configuration to support the on aircraft test
6. Tracks test points and updates pass/fail/repeat status
7. Supports on aircraft ground/flight testing as required.
8. Provides the judgment on acceptable test data during or post flight
9. Processing of data following a test flight to document test results
10. Development of flight test reports to show compliance with test requirements
11. Detailed test planning including mission plan, creating flight cards, configuration verification, and compiling appropriate restrictions and safety/hazard assessments
12. Prepare material and present for Test Readiness Review (TRR) to gain approval from stakeholders that system under test is ready to being ground/flight testing activities
13. Perform safety analysis and prepare material as required. for Safety Review Boards (SRB) to support test missions
14. Conducts flight test brief with flight ops and engineering
15. Provides the on airplane direction of test sequence and execution, relying on FT Analyst for acceptability of collected data with exceptions where this authority is delegated
16. Generates and transmits post flight test summary
17. Conducts debrief of test mission with test crew and engineering
 
Job Number: 148303
Job Location: Savannah, GA
Rate: $55/hr to $70
Per Diem: No
Overtime: Yes
Duration: Long term Contract
Start Date: ASAP
Input Date: 01/22/2020
Last Updated: 04/06/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Ravi Singh
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
1. Experience developing flight test plans for fixed wing onboard execution on an experimental aircraft in the areas of performance, aerodynamics, powerplant, mechanical systems, or electronic systems.
2. Experience executing test procedures onboard experimental fixed wing test aircraft.
3. Experience performing analysis of post flight data to determine pass/fail.

Education and Experience Requirements:
1. Bachelor's Degree in technical related curriculum applicable to the respective job position or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Five (5) years Flight Test engineering experience or ten (10) years broad eng experience in several technical disciplines.
3. Experience credit considered for related adv degrees limited to two (2) years for Masters, four (4) years for PhD in fields applicable to this job.
4. Flight Test Engineer Certification may offset one year of experience requirement.

Position Purpose:
1. Assists with the planning, coordination, test execution, and liaison to engineering supporting the development and production of company products and services.

Principle Duties and Responsibilities:
Essential Functions:
1. Perform core roles and responsibilities with some oversight and direction applicable to the complexity of the testing.
2. Support testing to including stability & control, flying qualities/characteristics, stall demonstration, performance, powerplant, mechanical systems, pneumatic systems, electrical systems, avionics, cooling/ventilation, icing, and cold/hot weather.
3. Work with engineering and test pilots to define test points that are conducted on test aircraft.
4. Definition of Instrumentation requirements and communication with instrumentation engineering group to support installation on aircraft to support test requirements.
5. Definition of the aircraft configuration to support the on aircraft test.
6. Tracks test points and updates pass/fail/repeat status.
7. Supports on aircraft ground/flight testing as required.
8. Provides the judgment on acceptable test data during or post flight.
9. Processing of data following a test flight to document test results.
10. Development of flight test reports to show compliance with test requirements.
11. Detailed test planning including mission plan, creating flight cards, configuration verification, and compiling appropriate restrictions and safety/hazard assessments.
12. Prepare material and present for Test Readiness Review (TRR) to gain approval from stakeholders that system under test is ready to being ground/flight testing activities.
13. Perform safety analysis and prepare material as required for Safety Review Boards (SRB) to support test missions.
14. Conducts flight test brief with flight ops and engineering.
15. Provides the on airplane direction of test sequence and execution, relying on FT Analyst for acceptability of collected data with exceptions where this authority is delegated.
16. Generates and transmits post flight test summary.
17. Conducts debrief of test mission with test crew and engineering.

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
2. Actively works to improve daily processes and ensure all work meets customer (internal/external) requirements.
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities.
4. Perform other duties as assigned.

Other Requirements:
1. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 12036
Job Location: Savannah, GA
Rate: $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 01/09/2020
Last Updated: 03/18/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
Assists with the planning, coordination, test execution, and liaison to engineering supporting the development and production of company products and services.

Unique Skills:
• Experience developing flight test plans for fixed wing onboard execution on an experimental aircraft in the areas of performance, aerodynamics, powerplant, mechanical systems, or electronic systems
• Experience executing test procedures onboard experimental fixed wing test aircraft
• Experience performing analysis of post flight data to determine pass/fail

Essential Functions:
• Perform core roles and responsibilities with some oversight and direction applicable to the complexity of the testing
• Support testing to including stability & control, flying qualities/characteristics, stall demonstration, performance, powerplant, mechanical systems, pneumatic systems, electrical systems, avionics, cooling/ventilation, icing, and cold/hot weather
• Work with engineering and test pilots to define test points that are conducted on test aircraft
• Definition of Instrumentation requirements and communication with instrumentation engineering group to support installation on aircraft to support test requirements
• Definition of the aircraft configuration to support the on aircraft test
• Tracks test points and updates pass/fail/repeat status
• Supports on aircraft ground/flight testing as required.
• Provides the judgment on acceptable test data during or post flight
• Processing of data following a test flight to document test results
• Development of flight test reports to show compliance with test requirements
• Detailed test planning including mission plan, creating flight cards, configuration verification, and compiling appropriate restrictions and safety/hazard assessments
• Prepare material and present for Test Readiness Review (TRR) to gain approval from stakeholders that system under test is ready to being ground/flight testing activities
• Perform safety analysis and prepare material as required. for Safety Review Boards (SRB) to support test missions
• Conducts flight test brief with flight ops and engineering
• Provides the on airplane direction of test sequence and execution, relying on FT Analyst for acceptability of collected data with exceptions where this authority is delegated
• Generates and transmits post flight test summary
• Conducts debrief of test mission with test crew and engineering

Education and Experience Requirements:
• Bachelor's Degree in technical related curriculum applicable to the respective job position or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 5 years Flight Test engineering experience or 10 yrs broad eng experience in several technical disciplines.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job. Flight Test Engineer Certification may offset one year of experience requirement.
 
Job Number: 24-378
Job Location: Savannah, GA
Rate: $55-$70/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 01/09/2020
Last Updated: 02/13/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

Lab Test Engineer

Description:
PDS Tech is seeking an Lab Test Engineer, in Colorado Springs, CO.

Summary:

  • Manages research, development, design, and testing of electrical components, PC Board Layout, Electronics Packaging equipment, facilities, systems, products and networks for commercial, industrial and governmental purposes.
  • Review schematics and customer requirements for each product to assure accurate tests are being performed for each product.
  • Create detailed testing procedures for fire and gas detection products.
  • Evaluate and understand the Bill of Materials to verify all of the components are considered during testing.
  • Prioritize tasks and testing procedures to meet company and customer goals.
  • Execute validation and regression level tests.
  • Verify functional requirement on new product designs.
  • Create effective testing procedures in order to execute 200+ tests using multitasking techniques.
  • Track progress on program testing to ensure schedule goals.
  • Document product and procedure test results in an organized manner for leadership and co-workers to review.
  • Analyze defective components and product systems.
  • Conduct failure analysis, document the cause(s), and notify the team and supervisor of results.
  • Compile and report any unusual conditions or high risk results that could affect the quality or safety of the product.
  • Follow-up with engineering teams on re-designed product or products that needed technical updates or changes resulting from non-compliant test results.
  • Review, test, and validate agency requirements for each product to ensure compliance to agency standards.
  • Collaborate with the team and share ideas on process improvement.

Qualifications:
  • 4+ years of experience working as a technician or test engineer on electronic products in an engineering lab (combination of years spent in product design are also applicable).
  • Proficient using digital and analog testing equipment such as multimeters, oscilloscopes.
  • Excellent self-task management/prioritization and documentation skills in a R&D or testing lab environment.
  • Understands how to read and interpret schematics, installation sheets, and bill of materials.
  • Demonstrated analytical and problem solving skills with little to no supervision.
  • Interpersonal skills to work with several departments, including engineering and production.
  • Excellent verbal and written communication skills.
  • Experience working on failure probability models and risk mitigation plans.
  • General understanding of engineering equipment like soldering irons, hand-held power tools.
  • Expert on Microsoft Office (especially Excel and macros in Excel).
  • Ability to stand for long periods of time and lift up to 50 lbs. with or without reasonable accommodation.
  • Must be authorized to work in the U.S.A. without restrictions.

Preferred:

  • Experience with a Surface Mount Technology (SMT) a plus.
  • Knowledge of Engineering Graphical Packages.
  • Worked in the fire and gas industry with knowledge of regulatory standards such as UL268/217/521/EN54.
  • Expertise in Minitab, and/ Or LabVIEW.
  • Past experience with product design.

Educations:

  • Bachelors


  • Associate’s Degree in electrical technology, electrical test technician, or related field with 6+ years of experience. 2+ in an electrical lab test environment with remainder in product design.
  • Bachelor’s Degree in electronics engineering technology, engineering technology, or related field is preferred 2+ years of experience in an electrical lab test environment or product design.

 
Job Number: 2010111048
Job Location: CO Springs, CO
Duration: 12 months
Input Date: 01/22/2020
Last Updated: 07/02/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Mike Flanery
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fgGKQAY&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Legal Administrator

Description:
Legal Administrator

Job ID # 2020-10862

Contract Opportunity

Location: Chicago, IL

Industry: Aerospace & Defense

Minimum Education: High School Diploma / GED

Minimum Experience: 4+ years



What You’ll Do:
•Triage and organize all forms of communication as desired including incoming calls, messages and correspondence received.
•Coordinate and process domestic and international business travel arrangements.
•Monitor designated business traveler’s logistics and generate expense reports.
•Act as liaison and facilitate communications between the law department and clients, assess urgency of situation and determine appropriate action.
•Generate, revise, proofread letters, presentations, and correspondence.
•Verbally and electronically communicate a wide variety of information to multiple audiences.
•Review, assess, prioritize monitor status of pending items, follow up and keep attorney/staff informed.
•Manage calendars, coordinate meetings, teleconferences, WebEx meetings and conferences.
•Handle appropriately communications of a sensitive and confidential nature.
•Maintain files and correspondence using accepted legal office practices and company record keeping systems and procedures.
•Process invoices, track department budgets and generate reports using spreadsheets and internal legal matter management system.
•Reconcile corporate credit card charges to ensure timely and accurate reimbursement.
•Coordinate with the appropriate focal(s) to support the acquisition and maintenance of resources. Order and maintain office supplies.
•Plan and implement logistics for executive level internal and external events.
•Provide back-up assistance to other Legal Administrators as needed.



What You’ll Need:
•Experience providing administrative support to multiple customers such as executives, managers and staff members.
•Extensive work experience using Adobe Professional and Microsoft Office products including Outlook, PowerPoint, Excel, and Word.
•Must have a demonstrated ability to work under limited supervision in a fast-paced environment, and perform multiple work assignments concurrently, often within a short period of time.
•Must have a positive, flexible, and team-oriented attitude.
•Experience making domestic and international travel arrangements and generating expense reports preferred.
•Experience in schedule management and travel or event planning preferred.



*U.S. Citizenship is required by law, regulation, executive order, or government contract.



Education & Experience:
•High School Diploma / GED combined with 4+ years of relevant work experience.



What to Expect:
•Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
•Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.





Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.





Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/
 
Job Number: 2020-10862
Job Location: Chicago, IL
Input Date: 02/12/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Looking for Wire Design Engineer in OK, MO and WA states

Description:
Multiple Positions Below

1. Wire Design & Install Engr 5

Location: Hazelwood, MO
Duration: 5+ Months

Description:
The QF-16 team is responsible for the design and installation of Drone Peculiar Equipment (DPE) to convert retired USAF F-16's into Full Scale Aerial Targets. This role leads all wire harness design activities from schematic wire diagram definition through cable/harness definition. This position supports fielded aircraft as well as two active production lines. The candidate will apply their electrical design background to troubleshoot issues with fielded aircraft, provide technical guidance to supplier management, and provide design support to the production lines. The primary role for this position is to develop the QF-16 electrical design baseline in accordance with new business opportunities.

Typical Education/Experience:
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 10 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD, Master+3 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard

Primary responsibilities:
- Develops and maintains cable/wire harness detail and assembly designs.
- Analyzes results and performs design reviews.
- Develops and maintains electrical product detail, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry, antennas).
- Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, and shop revision requests).
- Documents processes, specifications and procedures that support the design and manufacture of electrical commodities.
- Develops basic statements of work.
- Participates in technical review of supplier capabilities to facilitate source selection.
- Analyzes functional and physical input to assure development of complete integrated design.

Basic Qualifications:
- This position requires the ability to obtain a US Security Clearance.
- 10+ years of experience designing the fabrication of wire harness/cables.
- 5+ years of experience in a leadership role, leading teams or projects to successful completion.

Preferred Qualifications:
- Familiarity with Teamcenter Engineering.
- Ability to interrogate models in Unigraphics (NX).
- Experience communicating with customers and suppliers.
- Experience with aircraft modification design.

Education / Experience:
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 14 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+9 years' related work experience, Master+12 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

Skill Code: 601-Wire Design & Install Engr-General





2. Wire Design & Install Engr 5

Location: Oklahoma City, OK
Duration: 6+ Months

Description:
Provides guidance in the development of cable/wire harness detail and assembly designs. Provides guidance in the development of electrical product detail, assembly and installation designs. Provides direction used by multiple teams to analyze complex results and performs design reviews. Provides guidance in engineering design disposition on discrepancies. Defines processes, specifications and procedures that support the design and manufacture of electrical commodities. Provides direction used by multiple teams to develop complex statements of work, metrics, schedules and budgets. Directs the technical review of supplier capabilities to facilitate source selection. Directs the development of functional and physical design requirements to ensure complete integrated design architecture. Works under consultative direction.
OKC Electrical Harness/Cable Group is seeking senior electrical harness/cable engineers. The candidate will mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for client Military Aircraft, Military Derivative Aircraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, B-1B, B-2, B-52 and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft harness/cable design on the various platforms.

This position provides an excellent opportunity to develop new solutions, help grow and mentor the next generation of engineers, and guide the candidates' career towards the submittal of a candidacy for a position in the Technical Fellowship.

Other Job Responsibilities May Include:
- Provides guidance in the development of cable/wire harness detail and assembly designs.
- Provides guidance in the development of electrical product detail, assembly and installation designs.
- Provides direction used by multiple teams to analyze complex results and performs design reviews.
- Provides guidance in engineering design disposition on discrepancies.
- Defines processes, specifications and procedures that support the design and manufacture of electrical commodities.
- Provides direction used by multiple teams to develop complex statements of work, metrics, schedules and budgets.
- Directs the technical review of supplier capabilities to facilitate source selection.
- Directs the development of functional and physical design requirements to ensure complete integrated design architecture.
- Works under consultative mentorship.

Client is the world's largest aerospace company and leading manufacturer of commercial airplanes and defense, space and security systems. We are engineers and technicians. Skilled scientists and thinkers. Bold innovators and dreamers. Join us, and you can build something better for yourself, for our customers and for the world.

Basic Qualifications (Required Skills and Experience):
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 14 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+9 years' related work experience, Master+12 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

Must possess good organizational, interpersonal, and problem-solving skills. Must have demonstrated a strong work ethic and sense of urgency for completing assigned work with a history of meeting commitments. Ability to adjust priorities to multiple demands and unanticipated events.

Highly motivated and must work well in a team environment. The ability to communicate effectively, both verbally and in writing

Skill Code: 652-Wiring Design





3. Wire Design & Install Engr (Level 3, 4, 5)

Location: Tukwila, WA
Duration: 6+ Months

Description:
Wire Harness Installation Design is a unique opportunity to use both electrical and mechanical skills. This position also allows the possibility to see your released engineering be installed while supporting the build during shipside support. Job duties during the design phase include analyzing functional schematics and wire diagrams to understand system design. Developing and maintaining cable/wire harness detail and assembly designs. Performing design reviews to validate spatial integration and requirements verification. Developing and maintaining electrical product details, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry). During the build phase, provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Works under general direction.
Come join Client Commercial Derivative Airplanes in Tukwila, WA with the unique opportunity to work on the next generation platforms. At Client, our engineers use their expertise to create innovative next generation capabilities for a wide variety of amazing aerospace platforms and products. In joining this program, you will be part of an outstanding team of technical designers & engineers making history as we shape this one of a kind next generation Aircraft.

Position Responsibilities:
- Develops, maintains and releases electrical/mechanical drawings, systems designs or engineering documentation and data by applying company, industry and governmental standards.
- Using design tools prepares documentation and incorporates design changes.
- Creates, develops and maintains systems designs by preparing design layouts, modifying existing designs and assisting in identifying design discrepancies.
- Supports engineering system design and functionality validation activities.
- Develops and maintains product installation designs and part designs ranging from simple to moderately complex.
- Coordinates activities and products with internal partners and external suppliers.
- Works under general direction.

Basic Qualifications (Required Skills and Experience):
- Designing or supporting electrical wire harness Installations
- Education/experience typically acquired through advanced technical education from an accredited course of study in Electrical or Mechanical engineering, computer science (e.g. Bachelor) and typically 14 or more years' related work experience or an equivalent combination of technical education and experience (e.g. Master+12 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

Preferred Qualifications (Desired Skills/Experience):
- Active security clearance is preferred
- Client Defense Experience preferred but not required

Skill Code: 679-Electrical/Electronic Installation Design
 
Job Location: Hazelwood, MO
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 months
Start Date: Asap
Input Date: 01/20/2020
Last Updated: 03/02/2020
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer (Aerospace Industry)

Description:
This candidate will:
• manage high complexity design and planning of layout for assembly and materials handling.
• Adapt machines or equipment design to factory and production conditions.
• Plan Sequence of Operations and specification procedures for the fabrication of tools and equipment and other functions that affect product performance.

Candidates will support a work transfer project to India.

Project scope includes:
• baselining current processes,
• implementation of corrective actions, and
• related fixture design.

Additional duties to include support of legacy product lines. Legacy lines include:
• aircraft wipers,
• video systems, and
• electronic sub systems.

Required Qualifications
• Good interpersonal skills and be self-motivated.
• Bachelor’s degree

Desired qualifications:
• Experienced Manufacturing Engineer capable in process design, work instruction creation and fixture design.
• Experience in Aerospace Engineering
• Proficiency in SAP, Teamcenter, CREO
 
Job Number: 2010110561
Job Location: Burnsville, MN
Per Diem: split
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 02/14/2020
Last Updated: 02/24/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer 4-Tukwila (Electrical)

Description:
Manufacturing Engineer 4

Location: Tukwila, WA
Duration: 6 Months

Job Description:
Leads Integrated Product Teams (IPTs) in analyzing product development, complex producibility studies and production/tooling philosophies. Refines, validates, coordinates and implements conceptual designs and manages the program architecture for build. Develops manufacturing plans and oversees plan optimization. Conducts complex producibility and variation analyses to ensure that manufacturing process capability matches requirements. Resolves complex technical problems. Serves as a project manager to ensure that contract requirements, specifications, design criteria and schedule performance are integrated and maintained. Leads advanced design solutions and supports research of new product or business opportunities. Deploys company Lean Enterprise analysis methods. Documents and communicates producibility best practices. Provides guidance to others through structured mentoring.

Education / Experience:
Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctor of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Skill Code: 66T-Electrical/Electronics
 
Job Number: 20-00898
Job Location: Tukwila, WA
Per Diem: split
Overtime: possible
Duration: 6 months
Start Date: 2/1/2020
Input Date: 01/21/2020
Last Updated: 03/25/2020
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 4620 E 53RD ST
City, State: DAVENPORT, IA 52807
Phone: 312/502-4795
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer Level 2

Description:
Description:
Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling. May incorporate inspection and test requirements into the production plan. Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality. Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques. Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensures processes and procedures are in compliance with regulations.

Skill/Experience/Education
Mandatory:
Bachelor's degree in Mechanical Engineering or Aerospace Engineering or related discipline from an accredited college. Minimum 2 years of professional experience.

Desired:
Experienced with SAP Experienced with Microsoft, Office (PowerPoint, Access, Word, Excel). Knowledge of electro-mechanical assembly, industrial processes, technical writing, and teaming. Strong written and verbal communication skills. Knowledge of Lean manufacturing concepts and techniques, Pro-E, or equivalent CAD software, tool design, electronic, packaging design, and MRS, concepts Leadership experience Experience in a Manufacturing environment

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest) Years Mandatory(Yes/No)
1 2 3 4 5

Work Instruction Development Development of Work Manufacturing Instructions for CCA or C&H build in SAP. 3 0-3 Years Yes
Hardware Process Development CCA, ECA, and/or C&H 3 0-3 Years Yes
Direct Production Support Provide direction and training to hourly production workers 5 0-3 Years Yes

Special Needs
Category Description Recurring Frequency Mandatory
Training SAP No N/A No
As an equal opportunity employer, ICONMA prides itself on creating an employment environment that supports and encourages the abilities of all persons regardless of race, color, gender, age, sexual orientation, citizenship, or disability.
 
Job Number: 19-16599
Job Location: Ocala, FL
Per Diem: Possible
Overtime: Yes
Duration: 6 Months
Input Date: 12/12/2019
Last Updated: 03/02/2020
Firm Name: ICONMA LLC
Attention: Saumya Negi
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

Material Handler III

Description:

The job is physical in that candidate must be able to climb stairs to get to a stockroom environment
They will work in a stockroom environment working on Kitting Electrical computer parts
Work with receiving and delivering small pieces received to distribute to the floor
Will be pulling items and delivering
Will use computer to track so must have computer familiarity
This is NOT a WAREHOUSE forklift material handler role
Basic level but requires physical fitness to handle stairs
Inventory, tracking, counting electronic pieces



 
Job Number: 1910103618
Job Location: Bohemia, NY
Duration: 12 months
Input Date: 01/06/2020
Last Updated: 07/02/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Patrick Mahoney
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: cecjdallasav@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GQd8QAG&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
Five years Experience with an aircraft mechanical system design/test/troubleshooting such as hydraulics, landing gear, flight controls, fluid carrying systems (fuel, O2, water), powerplant, crew & equipment/electronic racks, doors, or auxiliary mechanisms, and secondary structures. Preferred additional experience as an MRB engineer with MRB stamp/credentials authorized by an OEM or major aircraft supplier.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
 
Job Number: 132070
Job Location: Savannah,, GA
Input Date: 02/11/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
Unique Skills:
1. Five (5) years Experience with an aircraft mechanical system design/test/troubleshooting such as hydraulics, landing gear, flight controls, fluid carrying systems (fuel, O2, water), powerplant, crew & equipment/electronic racks, doors, or auxiliary mechanisms, and secondary structures.
2. Preferred additional experience as an MRB engineer with MRB stamp/credentials authorized by an OEM or major aircraft supplier.

Education and Experience Requirements:
1. Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Ten (10) years in specific technical discipline or 15 years broad eng experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

Position Purpose:
1. Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

Principle Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues.
2. Is consulted extensively by associates and others as a recognized authority within the field.
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities.
4. Approach to problem solving balances technical product, cost and schedule.
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results.
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative.

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
2. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 12224
Job Location: Savannah, GA
Rate: $66.00 - $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 02/11/2020
Last Updated: 03/18/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer III- Job id 40161

Description:
We have an Excellent Contract position for a Mechanical Engineer to join a leading Company located in the Vista, CA area.(Please add the job id to your response- 40161).
Job Responsibilities:
Design and develop large-scale cargo inspection systems.
Develop and design mechanical assemblies, specify mechanical components, define operational specifications, test and document designs and provide product service support.
Support overall program objectives in executing the definition and details of the development process per schedules, budgets, and technical direction.
Work closely with Engineers and Scientist of other disciplines to assure overall system design and performance is implemented and maintained correctly.
Create and maintain specifications, ensuring documents are well developed, accurate, and consistent.
Ability to organize and prioritize tasks based on guidance and direction from the engineering manager.
Ability to work and communicate effectively in a team environment.

Basic Hiring Criteria:
Bachelor’s degree in a related field.
Minimum 3 years of verifiable related experience.
Hands-on experience in the development and design of electromechanical systems.
Proficient in Engineering Mechanics (Statics and Dynamics), Fluid Mechanics, and Heat Transfer.
Hands-on experience with defining and implementing formal design documentation for mechanical engineering designs, including assembly and detail drawings, BOM’s, 3D CAD modeling.
Training and experience with Solid modeling.
Physical abilities are consistent with normal work in engineering design and development environment.
Excellent interpersonal skills.
Strong oral and written communication skills.
Ability to pass TSA suitability background check.
Must be willing to travel abroad. If travel is necessary, it typically will be 10%.

Desired Qualifications:
History of completing commercial finished products. Knowledge of machining, fabrication, and sheet metal, processes.
Experience developing, executing and reporting engineering tests and results.
Can write reports, business correspondence, and technical procedures.
Large integrated industrial platforms.
Materials and material properties associated with outdoor platforms and electronic enclosures.
Corrosion protection techniques.
Materials finishing processes.
Solidworks or other design/analysis software tools.
Can effectively apply Geometric Dimensioning and Tolerancing (ANSI Y14.5).
 
Job Number: 40161
Job Location: Vista, CA
Rate: $38-$61-DOE
Per Diem: NO
Overtime: YES
Duration: 8 Month+
Start Date: ASAP
Input Date: 01/31/2020
Firm Name: TAD PGS INC
Attention: Maria Gomez
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems MRB Engineer

Description:
5 years’ experience with an aircraft mechanical system design/test/troubleshooting such as hydraulics, landing gear, flight controls, fluid carrying systems (fuel, O2, water), powerplant, crew & equipment/electronic racks, doors, or auxiliary mechanisms, and secondary structures. Preferred additional experience as an MRB engineer with MRB stamp/credentials authorized by an OEM or major aircraft supplier. *** Candidate must be US Persons. **
 
Job Number: 20-152181
Job Location: GA
Rate: $70.00 per hour
Duration: Long Term
Start Date: ASAP
Input Date: 02/11/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Process Engineering Specialist

Description:
** Candidates must be U.S. Citizens without Dual Citizenship **
** This is a Temp-to-Hire position. If the selected candidates perform well they will be converted to direct employees **
** Candidates must be able to interview in-person at their own expense if not local **

Duties:
40% - Provide in-process technical guidance to production assembly and test processes. Disposition discrepant hardware. Resolve hardware constraints.
10% - Provide process technical expertise to support product design reviews and manufacturing/supplier readiness reviews.
10% - Analyze performance drivers, and lead project team(s) to implement processing efficiencies to achieve performance/cost targets, utilizing Lean manufacturing tools.
10% - Define assembly and test process specification requirements. Document lessons learned and best practices into assembly and test standard work instructions and manufacturing planning. Develop and provide technical training to technicians.
10% - Maintaining tooling and work center readiness (calibration, preventative maintenance plans, Foreign Object Elimination).
15% - Utilize process input and output characteristic data (statistical process control, as applicable) to drive process improvement and process control to achieve cost of quality targets. Perform relentless root cause analysis and lead project team(s) to implement corrective and preventive actions.
5% - Identifying, reporting, and eliminating unsafe acts & unsafe conditions within assembly and test work areas.

Skills:
1. While performing the duties of this job, employees will be working in a Class 100,000 clean room.
2. Minimum required PPE includes steel-toed shoes, safety glasses, and clean room smock.
3. Experience with mechanical assembly methods, tools, and processes (including threaded inserts, lockwire, safety cabling, bolt stretching, lock washer installation bearing / bushing installation, bellville springs).
4. Experience handling, maintain, resorting critical sealing surfaces.
5. Experience dispositioning hardware and performing root cause analysis.
6. Experience using electronic planning and reading electronic drawings.
7. Strong analytical and communication skills (written and oral) are required, along with the desire to work in a collaborative team environment.
8. Candidates must have a demonstrated ability to organize and complete projects, objectives, and tasks.

Key Focus:
1. Precision Assembly
2. Torque Wrenches
3. Fastener Lube/Safety wire
4. Pressure and Leak testing (Single and multi zone)
5. Process and safety improvements
6. Corrective action investigations and implementation
7. 100 class clean room or better experience
8. FOD/FOE

Desirable Qualifications a plus:
1. Experience working with pneumatic pressure systems to perform leak testing using mass spectrometer/bubble soap solution.
2. Training or experience utilizing Lean manufacturing tools (Kaizen, VSM, 3P, manufacturing std work, process matrices, P-Q analysis).
3. Six Sigma or equivalent statistical process control training/certification.
4. Experience working in a Class 100,000 clean room (smock/gowning required).

Education:
1. Requires Bachelors degree in an Engineering, Industrial Technology or related technical discipline and 9 years of related experience working in a manufacturing environment (or an equivalent combination of education and experience).
 
Job Number: 12217
Job Location: Canoga Park, CA
Rate: $45.00 - $53.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: Temp-to-Hire
Start Date: ASAP
Input Date: 02/26/2020
Last Updated: 02/26/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Data Engineer

Description:
We are currently seeking a Data Engineer to fill a role with an international manufacturing company in Chesapeake, VA. This position will require working with Engineering, Design, Sales, and Marketing departments to identify, load and manage product data. Interested candidates should have a familiarity with CAD software and CAD architectures as well as knowledge of programming languages such as Visual Basic in applications like MS Excel or AutoDesk Inventor.

Responsibilities of the Product Data Engineer
Help investigate, define and document product business rules for use in the development of current and future projects.
Gather, organize and verify product data into a usable electronic format, involving creation or remapping of data. Data may include CAD drawings or models, BOMs and customer specifications.
Support Engineering, Design, Sales and Marketing teams to identify, load and manage product data.
Help define and implement management processes involving product data to maximize its usability.
Troubleshoot, support and maintain the integrity of inputs and outputs from the configuration product applications.
Organize CAD data and product rules into AutoDesk Inventor environment as well as automating the creation of 3D Models for a variety product configurations using Visual Basic macro engine.

Requirements
Bachelors Degree in Engineering (Mechanical or Electrical) or related technical discipline.
Working knowledge of programming languages such as Visual Basic in Applications like MS Excel or AutoDesk Inventor.
Familiarity with CAD software and CAD architectures.
Knowledge of relational databases is a bonus.
Excellent verbal and written communication skills as well as strong problem solving and organization skills.
Ability to work in a team environment.
 
Job Location: Chesapeake, VA
Input Date: 01/30/2020
Last Updated: 04/02/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Andrew Bondy
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

Product Repair/Mod Technician B

Description:
Chipton-Ross is seeking 4 Product Repair/Mod Technician B's at NAS Lemoore, CA.

RESPONSIBILITIES:
Personnel perform repairs and final acceptance testing on avionics and test equipment to include the replacement of electronic discrete and active components (microcircuits, transistors, capacitors, resistors, etc.). Specifically required to functionally test avionics and test equipment to determine operational condition, perform fault isolation and troubleshooting of faulty avionic electronic circuits, install replacement parts using high-reliability soldering techniques, and utilize hand tools to (dis)assemble avionic assemblies. Applicant must be capable of reading and interpreting assembly drawings and electronic schematics, which are utilized in the testing and repair effort, and must be capable of inspecting their own work for compliance to quality standards. Ability to travel to both domestic and international locations (on short notice). Disassembles systems components to support the correction of failures or implement changes. Performs routine troubleshooting of pneumatic, hydraulic and electrical systems to isolate mechanical or electrical faults and repair faulty components. Performs validation/verification testing of systems and components. Inspects component before installation or usage to verify cleanliness and serviceability of components. Fabricates and modifies aerospace products according to specifications. Performs tasks associated with the safe handling of a aerospace vehicle (e.g. jacking, towing, system operations). Test, troubleshoot, and fault isolate avionic systems down to the faulty electronic components using:
Electronic circuit schematics
Commercial test equipment
Specialized test equipment
Technicians knowledge of electronics and their ability to troubleshoot

Replace electronic components using high-reliability soldering techniques. Verify quality requirements are met. Re-test to ensure the operational acceptance of the avionics before delivering to our customer.

Works under general supervision.

EDUCATION:
High school diploma or GED and typically 4 or more years related experience or an equivalent combination of education and experience.

FULL TIME/1ST SHIFT
WORK HOURS: 5:30 AM - 2:00 PM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 184715
Job Location: NAS Lemoore, CA
Rate: $DOE
Duration: 12 Months
Input Date: 02/13/2020
Last Updated: 07/02/2020
Firm Name: CHIPTON ROSS
Attention: Juan Saldarriaga
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: jsaldarriaga@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Production Planner II ( Clearfield, Utah ) S9705161

Description:
Production Planner II ( Clearfield, Utah ) S9705161
12 Month Contract

**MUST HAVE Active Secret DoD Clearance within 5 ½ years of last investigation**

Job Description:
Plans sequence of fabrication, assembly, installation, and other manufacturing operations relating to specific portion of the product for guidance of production workers. Plans detail operations from blueprints, engineering orders, change notices, and other engineering releases. Determines the need for tooling and makes recommendations for the design and planning of required tools. Prepares shop work orders for materials and product processing and coordinates with schedulers to ensure that items are being processed according to specifications and time requirements. Maintains progress reports, schedules, and other related records.

Basic Qualifications:
• Active Secret DoD Clearance within 5 ½ years of last investigation
• Experience in working with aerospace specifications and drawings
• Experience in the areas of composite hand layup, bonding, cure, fastened assembly, subsystems installation, metallic hardware or machining experience
• Excellent computer skills. Skilled in working with Microsoft Office applications.
• Experience authoring manufacturing procedures
• Experience authoring manufacturing procedures both electronic and paper
• Experience creating and maintaining MBOMs
• Functional knowledge of production control systems (SAP/Visual Mfg/etc)
• CAD experience (CATIA or NX)

Preferred Qualifications:
• Experience in the use of NX 10 or higher
 
Job Number: S9705161
Job Location: Clearfield, UT
Rate: Open
Per Diem: No
Overtime: yes
Duration: 12 Month
Start Date: ASAP
Input Date: 02/09/2020
Last Updated: 02/09/2020
Firm Name: TALENTPRO CONSULTING
Attention: TIMOTHY MAHANEY
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Production Test Technician - no clearance CA

Description:
167499 Job Title: Production Test Technician

Work Site Address: Ventura, CA 93003
Job Number: 3069-1
Max Pay Rate: $23.00/hr
Start Date: 2/3/2020
End Date: 2/2/2021
Position Type: Contract

Job Summary:
JOB DESCRIPTION FOR THE 2 wire wrapping experience and/or harness build, repair positions AND 1 electrical blueprint interpretation and/or electrical repairs experience position:
Sets up test apparatus and conducts tests of electronic assemblies and units following methods, procedures, standards, and sequences; lays out and assembles units for production electronic equipment according to designs and specifications.

JOB DESCRIPTION FOR THE 2 valve repair/rebuild experience positions:
Mechanical knowledge and some experience with disassembly, clean and preparation, and reassembly of deluge valves following methods, procedures, standards, and sequences

2 wire wrapping experience and/or harness build, repair positions AND 1 electrical blueprint interpretation and/or electrical repairs experience position:
Adjusts and calibrates systems as required; modifies electronic equipment by adding, removing, or altering components as defined by predetermined diagrams and sketches.
Corrects malfunctions by making adjustments or replacing parts or components as directed.
Uses hand and small power tools, and various measuring and testing devices in performing job duties.
Determines types of tests to be performed, approves and suggests modifications to testing equipment, and analyzes test results to evaluate performance of products and equipment.
Assists engineers in design and development of test procedures for new products and recommends product improvements or manufacturing modifications.
May monitor and verify quality in accordance with statistical process or other control procedures.

2 valve repair/rebuild experience positions:
lays out and assembles units for repairs and upgrades according to designs and specifications.
Corrects malfunctions by making adjustments or replacing parts or components as directed.
Uses hand and small power tools, and various measuring and testing devices in performing job duties.
Conducts testing after repairs/upgrades, approves and suggests modifications to testing equipment, and analyzes test results to evaluate performance of products and equipment.
Assists engineers in design and development of test procedures for new products and recommends product improvements or manufacturing modifications.
May monitor and verify quality in accordance with statistical process or other control procedures.

Qualifications and Education Requirements
2 Positions are for candidates with wire wrapping experience and/or harness build, repair.
1 Position is for a candidate with experience in electrical blueprint interpretation and/or electrical repairs.
2 Positions are for candidates with valve repair/rebuild experience.
NO Degrees are required for these positions.

Preferred Skills
Skills: Category Name Required Importance Experience
Areas of Expertise Electrical Yes 1 1 - 2 Years
Technical Skills Mechanical Aptitude Yes 1 1 - 2 Years
Technical Skills Wireharness Print Reading Yes 1 1 - 2 Years

Qty 5 positions
 
Job Number: LMRMS-3069-1
Job Location: Ventura, CA
Rate: 23/hr max
Duration: 12 months
Input Date: 02/03/2020
Last Updated: 03/17/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

RF Microwave and Hardware Subsystem Design Engineer

Description:
PDS Tech inc is seeking a Microwave and Hardware Design Engineer in Baltimore, MD

The qualified candidate will work with a diverse and talented team of engineers developing innovative and cost-effective systems that support a broad range of products and business areas across the lifecycle of a program.  Responsibilities may include development of antenna architectures, receiver / exciter architectures, requirements generation/flow down; subsystem analysis including hardware from RF to digits, performance modeling, support for performance testing, requirements verification, and more.

Experienced applicants will have at least a Bachelor’s Degree in Science or other related technical degree and have experience designing, developing and/or testing radio frequency (RF) and/or microwave antenna systems and/or related RF hardware
In addition, this candidate should have demonstrated technical ability/leadership and expertise in one or more of the following areas:

- Active electronically scanned arrays (AESAs)

- Highly integrated subsystems including antenna hardware

- Reflectors, Reflect Arrays, Digital Beam Forming

- Antenna/RF Performance Analysis

- Computational Electromagnetics, Statistics

- Antenna or Subsystem Control Design

- Antenna Measurements and Data Reduction

- Antenna range integration, test, and system integration

- Subsystem requirements (hardware and software) derivation, flow-down, and configuration

The Engineering RF Microwave Design positions require the candidates to have the ability to obtain and maintain at least a Secret Clearance per business requirements. An active Secret or higher clearance is a plus!

This is a Dual level opening, candidate will be considered at both a level 3 or 4 based upon the Basic Qualifications listed below.

Qualifications:
Basic Qualification for a Band 3:

Must have a Bachelor's Degree in Engineering or related discipline with 5 years of experience in the areas described in the job description or 3 years of experience with a Master's Degree and/or 0 years of experience with a Ph. D.

Ability to Obtain and Maintain and Active Secret Clearance.

 
 
Job Number: 1910104510
Job Location: Baltimore, MD
Duration: 6 months
Input Date: 07/25/2019
Last Updated: 07/02/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Mike Flanery
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GTuwQAG&URLSource=cjhunter

Reliability & Maintainability Engineer 3 & 4

Description:
Job Description:
  • Analyzes requirements and develops an R&M engineering program to achieve customer objectives.
  • Analyzes projected utilization and calculates effect on final system reliability based on individual part reliabilities.
  • Allocates top level R&M quantitative requirements to design teams. Performs reliability predictions and track performance.
  • Develop FMECAs; Support Airworthiness and safety engineering as required
  • Perform Maintainability Analysis; leverage human factors and quality engineering best practices
  • Perform Reliability Centered Maintenance (RCM) analysis; leverage MSG-3 best practices
  • Perform Reliability Development Testing (HALT/CAST)
  • Perform R&M analyses and assessments on selected systems and influence Fault Detection and Isolation BIT requirements
  • Run scripts to translate these models into a form that is executable logic on the aircraft, and simulate intended operation.
  • Work with the real-time software development team to integrate the resulting executable applications into the Mission Computing hardware.
  • Develop Testability models from schematics, FMECAs, ICDS and other available supplier documentation to assess compliance to customer fault detection/isolation requirements.  Perform Failure Modes and Effects Testing (FMET)
  • Develop FRACAS plan and deploy closed loop FRACAS; lead FRB; Maintain RGC’s and perform Weibull Analysis

Required:
  • Minimum of 5 years experience performing R&M Engineering
  • Bachelor's, Master's, or PhD with 7 or more years' experience. Degree from an accredited course of study, in engineering, computer science, mathematics, physics, or chemistry. ABET is the preferred, although not required, accreditation standard.
  • Radar / Propulsion / Avionics / Hydromechanical and other relevant Aero system knowledge required.
  • Microsoft Excel, MATLAB/Simulink, Boeing RAMC, and Vanderbilt FACT run time reasoning tools.
  • MIL-HDBK-217F Reliability Prediction Electronic Equipment.
  • Rome Air Development Center AD-A153 744 Reliability Derating Procedure.
  • MIL-STD-1629 Rev A Procedure for Performing a Failure Mode, Effects and Criticality Analysis.
  • The ability to obtain a US Interim Security Clearance clearance pre start, final post start which requires US Citizen.

 
Job Number: 2010110791
Job Location: Saint Louis, MO
Duration: 12 months
Input Date: 01/20/2020
Last Updated: 07/02/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Brandon Davis
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002ffBOQAY&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Robotic Maintenance Technician

Description:
Plant 2 Maintenance Personnel Body Machining

  • Working knowledge of automated industrial machinery.

  • Basic understanding of electricity.

  • Working knowledge of hydraulic and pneumatic systems. (Repair, replace and rebuild)

  • Ability to read mechanical blueprints and schematics.

  • Basic knowledge of PLC.

  • Some experience with FANUC robots a plus.

  • Ability to replace reed switches and amplifiers.

  • Ability to troubleshoot complex electrical systems using voltmeters and electrical schematics.

  • Ability to troubleshoot pumps, motors, bearings, ball screws, conveyers, blowers and repair/replace (if necessary).

  • Ability troubleshoot, install and setup Mitsubishi VFD (Variable Frequency Drives).

  • Ability to work 12-hour shifts.

  • Self-starter and team player.




Plant 4 Maintenance Personnel - Assembly


  • Basic understanding of electricity.

  • Working knowledge of automated industrial machinery.

  • Knowledge of Keyence vision and barcode reading systems.

  • Knowledge of IMAJE inkjet printing systems.

  • Knowledge of SATO label printers.

  • Knowledge of the following robot systems:

    • FANUC (6-axis) w/ vision (cameras).

    • Yamaha (Cartesian) 3-axis.

    • Toshiba (Cartesian) 3-axis.



  • Knowledge of INFICON leak detectors.

  • Knowledge of automated feeding systems.

  • Working knowledge of PLC's.

  • Working knowledge of electronic sliders.

  • Ability to troubleshoot complex electrical systems using voltmeters and electrical schematics.

  • Ability to troubleshoot and repair pneumatic valves and cylinders.

  • Ability to troubleshoot repair/replace reed switches and amplifiers.

  • Ability to work 12-hour shifts.

  • Self-starter and team player.


Body Machining Maintenance Technicians:

1. Basic knowledge of PLC. Should not be confused when a control panel is opened. Regardless of machine specifics, should be able to identify various elements.

2. Ability to troubleshoot, repair, replace, and rebuild automated industrial machinery.

3. Ability to troubleshoot, repair, replace, and rebuild hydraulic and pneumatic systems.



Assembly Maintenance Technicians

1. Good, working knowledge of PLC. Should not be confused when a control panel is opened. Regardless of machine specifics, should be able to identify various elements, and troubleshoot problems.

2. Ability to troubleshoot, repair, replace, and rebuild automated industrial machinery.

3. Experience troubleshooting and repairing robot systems (FANUC 6-axis with vision cameras, Yamaha Cartesian 3-axis, Toshiba Cartesian 3-axis).





Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-33220
Job Location: Dallas, TX
Rate: 30.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2019-12-31 00:00:00.0
Start Date: 2019-11-04 00:00:00.0
Input Date: 08/21/2019
Last Updated: 03/02/2020
Firm Name: NESCO RESOURCE
Attention: Nico Spirito
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Advanced Engineering Technician

Description:
Senior Advanced Engineering Technician

Job ID # 2020-10767

Contract Opportunity

Location: Bloomington, MN

Industry: Aerospace & Defense

Minimum Clearance: Ability to Obtain Secret

Minimum Education: Associate’s Degree

Minimum Experience: 5 years



What You’ll Do:
•Support engineering development activities such as design, test, check-out, modification, fabrication and assembly of prototype electronic systems, experimental design circuitry, or specialized test equipment.
•May also be asked to develop test specifications and procedures and are sometimes tasked with report preparation and documentation of technical issues and are expected to provide clear and precise technical documentation.
•Managing lab assets, using electronic lab test equipment to troubleshoot hardware, software and system issues.
•Construct, troubleshoot, calibrate, adjust, test, diagnose, and maintain equipment, components, devices, or systems.
•Perform complex system level troubleshooting to component level.
•Support engineering activities such as design, test, check-out, modification, fabrication and assembly of prototype electromechanical systems, experimental design circuitry, laser/light transmission devices or specialized test equipment.
•Open to new ideas and can serve as a champion for change and acts to support change when directed from management.
•Construct, troubleshoot, calibrate, adjust, test, diagnose, and maintain equipment, components, devices, or systems.
•Perform a variety of equipment/process operations involving an application or technical skills in a specific area (electrical, software, manufacturing, etc.).
•Interpret complex engineering drawings, diagrams and schematics, and understand the necessary interfaces.
•Perform complex system level troubleshooting to component level.
•Direct others in the design and construction of tooling and fixtures to accomplish unique tasks.
•Demonstrate leadership and initiative in actions.
•May develop test specifications and procedures.
•May prepare reports, documentation/specifications as required.



What You’ll Need:
•Ability to obtain Secret clearance.
•Works from schematics, diagrams, written and verbal descriptions, layouts or defined plans to perform testing, checkout and trouble-shooting functions
•As a skilled specialist, completes tasks with minimal supervision in resourceful and effective ways
•Lift up to 40 pounds
•Understand practical applications of material properties
•As a skilled specialist, completes tasks in resourceful and effective ways
•Strong knowledge in specialized functions
•Minimal supervision required
•Work may be done without established procedures
•Strong proficiency in application and interpretation of complex specifications, requirements, standards and practices
•Strong knowledge in specialized functions
•Preferred: ◦Solder experience with fine pitch surface mount technologies
◦Experience with high speed digital electronics
◦Previous experience in the defense or aerospace industry
◦Working knowledge of Military Standards for environmental testing and electromagnetic compatibility testing




*U.S. Citizenship is required by law, regulation, executive order, or government contract.



Education & Experience:
•Associate’s degree combined with 5+ years of relevant work experience.



What to Expect:
•Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
•Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.



Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.





Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/
 
Job Number: 2020-10767
Job Location: Bloomington, MN
Input Date: 02/03/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Design Checker Engineer

Description:
Seeking a PCB and CCA Quality Check Engineer to support multiple programs. The ideal candidate will perform quality checks on circuit board layouts using CAD software to verify that the design meets certain performance and producibility requirements.

The primary responsibilities of this position will include, but not be limited to:
• Works independently and as part of a team to achieve the assigned objectives.
• Use Mentor Valor NPI software to analyze printed circuit designs and generate reports.
• Ability to interpret and have a working understanding of Electronic Engineering drawings
• Check and generate assembly drawings and fab/drill drawings with a very high degree of accuracy.
• Demonstrates a very high level of accuracy in all work performed.
• Effectively communicate PCB design improvement recommendations to the Design Layout team and Engineering.
• Provides input and feedback to engineering and other functional teams in support towards the success of the projects.
• Work with external customers, Engineering, and Supply Chain to resolve any design or interpretation issues.
• Updates the Engineering Design Rules & Standards documents and checklists to capture lessons-learned and changes brought about through external specifications, industry standards and customer driven requirements.
• Provides technical leadership and knowledge in the application and support of PCB design software, design guides and rules.

Required Skills:
• Minimum 2 years’ experience with analysis/checking responsibilities in the Electronics Assembly and Fabrication industry.
• Must be familiar with applicable industry (IPC) design and end product performance standards for circuit card assemblies and printed wiring boards including IPC-6012, IPC-2221, J-STD-001, IPC-7351
• Proficient in viewing ODB++/Gerbers data, PCB assembly and fabrication drawings, and Knowledge of Electronic Components and concepts.
• Proficient in Engineering Drafting principles defined in ASME specifications
• Good mathematics aptitude and very detailed oriented.
• Must have Excellent Computers skills: - EXCEL, WORD, OUTLOOK & other office suites.
• Excellent written and verbal communication skills.
• Understanding of Printed Circuit Board fabrication: material selection, stack up, HDI and/or processes
• Ability to communicate technical knowledge and document descriptions of technical solutions for CCA and PWB technology products.
• Ability to work in multiple discipline integrated product development team environments to successfully execute tasks and deliver high quality work products.

The position requires multi-tasking to support several programs concurrently and will require local travel between sites and also some remote travel as required.

Must be a US Citizen and have ability to obtain a DOD Security Clearance

Desired Skills:
• Must have a professional demeanor and strong interest in providing excellent customer service.
• Ability to learn new skills and tasks as required, especially using software applications for PCB & Assembly industry, such as Valor NPI, Mentor Expedition, BluePrint (Downstream Technologies).
• Excellent customers service skills with a sense of urgency.
• Must be highly organized, self-motivated, and able to multi-task.
• Ability to perform at the highest level in a fast-paced environment.
• Experience laying out printed circuit boards using Expedition CAD software.
• Familiarity with design tools for printed wiring board and circuit card assembly technologies (Mentor xDM, Mentor Expedition, Blueprint, VALOR NPI, etc.)
• Familiarity with PWB/CCA technology Manufacturing Design Rules and Guidelines (MDRGs)
• Prior experience designing, and / or supporting aerospace/defense related products
• Expertise in component selection for military and aerospace environments
• IPC CID or CID+ certification
• Existing Security Clearance

Required Education:
• 8 years with Associates Degree or other advanced degree in a related field

Desired Education:
• 6 years of industry experience as a Checker with Bachelors’ Degree or advanced degree in a related field
 
Job Number: 2010111370
Job Location: McKinney, TX
Per Diem: split
Overtime: possible
Duration: 3+ months
Start Date: ASAP
Input Date: 02/07/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Mechanical Engineer

Description:
Senior Mechanical Engineer

Job ID # 2020-10781

Contract Opportunity

Location: Bloomington, MN

Industry: Defense

Clearance Requirement: Ability to Obtain - Secret

Minimum Education: Bachelor’s Degree

Minimum Experience: 5 years



What You’ll Do:
•Electronic Packaging perform design and development of high-assurance, ruggedized combat systems, including mission computers, other platform computers and controllers, signal processors and related electronic components for manufacturing production.
•Perform mechanical design and development associated with packaging electronic assemblies into a military environment chassis.
•Packaging electronic circuit board assemblies into an enclosure to meet mechanical, thermal, shock, vibration, size, weight and power requirements
•Contribute to product planning, execution, status measurement and reporting
•Generation of formal drawings for release into a PDMLink system, electronic sign-off, delivery to manufacturing for parts ordering and assembly of new units
•Multitask and prioritize while dealing with several projects



What You’ll Need:
•This position requires the ability to obtain a Department of Defense Secret Security Clearance within a reasonable amount of time after hire.
•Must demonstrate a passion for innovation, a sophisticated understanding of systems engineering and analysis, and the ability to effectively develop and evolve technology.
•Excellent Creo skills for design capture and model generation (candidates will be asked to demonstrate their Creo working skills in a live computer environment).
•Good working knowledge of thermal modeling and analysis and experience with analysis packages such as ANSYS-Icepak and Pro Mechanica.
•Strong working knowledge of high reliability design of electronic assemblies for harsh environments.
•Broad mechanical knowledge in such areas as requirements definition, production support and environmental testing support.
•Experience with PDMLink.
•Self-starter, able to translate customer requirements into a cost-effective design that is optimized for manufacturing and periodic operational maintenance.
•Knowledge of PWB layout and construction and interface to mechanical design.
•Experience creating sheet metal, weldments, machine parts and assembly models from engineering concepts.
•Knowledge of connector and cable assembly concepts and terminology.
•Experience and working knowledge of Geometric Dimensioning and Tolerancing (GD&T).
•Experience and working knowledge of VITA standards.
•Previous aerospace industry experience is a plus.
•Electronics industry experience is a plus.
•Experience with liquid cooling of electronic circuit cards and modules is a plus.

*U.S. Citizenship is required by law, regulation, executive order, or government contract.



Education & Experience:
•Bachelor's Degree in Mechanical Engineering, a related specialized area or field is required (or equivalent experience) combined with a minimum of 5 years of relevant experience; or Master's degree with a minimum of 3 years of relevant experience.
•Bachelor's or Master's degree in Mechanical Engineering or equivalent

What to Expect:
•Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
•Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.



Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.





Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/
 
Job Number: 2020-10781
Job Location: Bloomington, MN
Input Date: 02/03/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Signal and Power Integrity Electrical Engineer

Description:
Signal and Power Integrity Electrical Engineer

Job ID # 2020-10806

Contract Opportunity

Location: Bloomington, MN

Industry: Aerospace & Defense

Minimum Clearance: Secret

Minimum Education: Bachelor’s Degree

Minimum Experience: 5 years



What You’ll Do:
•SI/PI Electrical Engineers research, design, develop and test military electronic equipment and systems including:◦avionics mission computers
◦stores management systems
◦radar processing systems
◦analog and digital circuitry components




What You’ll Need:
•Secret security clearance is required.
•Candidates must demonstrate a passion for innovation, a sophisticated understanding of electronic equipment and systems, and the ability to further advance company’s technology. A thorough understanding and application of SI/PI principles is critical to the success of highly sophisticated electronic systems with ever-increasing signal speeds and performance requirements.
•Candidates must have:◦Strong background in applied electro-magnetics, transmission lines and circuit theory
◦Familiarity with s-parameters, eye diagrams, jitter analysis, and signal integrity performance metrics in both time and frequency domains
◦Passion for making a career of signal and power integrity work with a goal of becoming a subject matter expert

•Preferred experience:◦Experience/Knowledge in one or more of the following areas:
◦Signal and Power Integrity simulation tools such as HFSS, HyperLynx, SIwave or similar
◦High speed measurement instruments such as VNAs, oscilloscopes, BERTs and TDR/TDTs
◦High frequency board and package level interconnect modeling and parasitic extraction
◦PCB module and backplane design and layout with a focus on signal and power integrity
◦High speed serial and parallel interfaces such as 10GBASE-KR, PCIe, DDR3/4, USB, SERDES, etc.
◦PCB design for manufacturability (DFM) and High Density Interconnect (HDI)




*U.S. Citizenship is required by law, regulation, executive order, or government contract.



Education & Experience:
•Bachelor’s degree in electrical engineering combined with 5+ years of relevant work experience; or Master’s degree combined with 3+ years of relevant work experience.
•Preferred degree:◦Bachelor's or Master's degree in Physics, Electrical Engineering or a specialized area, field or the equivalent




What to Expect:
•Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
•Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.



Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.





Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/
 
Job Number: 2020-10806
Job Location: Bloomington, MN
Input Date: 02/04/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer - Clearance TX

Description:
2890-1 Software Engineer
Work Location: Fort Worth, TX
Status: Open

Qty: 1
Desired Start Date: 1/28/2020
End Date: 1/28/2021

Job Description:
The F-35 Shared Simulation Software team is looking for highly motivated software engineers who have at least five years of experience developing and integrating software components using C++ and Object Oriented Development analysis (OOA)/ Object-Oriented Design(OOD) techniques. The Shared Simulation Software team develops and maintains the software simulations products that support the integration, testing, verification and mission effectiveness analysis for the F-35 program.
Additional desired skills for this position include software development experience with real-time simulation operating systems, avionics software flight and sensor software.

Responsibilities may include developing simulation software to incorporate new aircraft capabilities, integrating new or updated vendor models, integrating the shared simulation software products with customer products, performing analysis of simulation results with actual sensor performance and participating as a member of an agile team.

Additional Desired Skills:
Experience with Aircraft Avionics Sensors – Electronic Warefare (EW), Electronic Support Measures (ESM), RADAR, Distributed Aperature System (DAS), Electro-Optical Targeting System (EOTS)
Experience with Agile software development methodologies and tools, such as VersionOne
Experience with Linux operating systems

Region: Fort Worth, TX
Level: Level 3: BS+6-10 YRS or MS+4-8 YRS
Pay Rate: $90.00 Hourly
 
Job Number: JE-2890-1S6
Job Location: Fort Worth, TX
Rate: 90/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 01/13/2020
Last Updated: 04/01/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Sr. Principal Engineer Circuit Design 4

Description:
The Ground Systems Development Department in Manhattan Beach, CA is seeking a talented electrical engineer to develop and integrate complex electronic Test Sets and hardware units.  The hardware development responsibilities include architecture design, detailed design, test, integration, customer briefings, and post-delivery support of satellite system Test Sets and ground units.  The candidate will work closely with other engineering functions, including Flight Engineering, Systems Engineering, Product Engineering, Production, and Procurement to meet schedule and design requirements.  The ideal candidate has a broad range of experience with design, integration, and test of Digital and Analog circuits, PCBs, drawers, FPGAs, units, and subsystems and is capable of leading a small team.
  
Qualifications:
Basic Qualifications:


Bachelor’s Degree in Electrical or Computer Engineering, or another STEM degree from an accredited institution plus 9 years of experience in an Engineering Environment;  OR, a minimum of 7 years of experience with a Master’s Degree in STEM
Design and test experience in digital technology

Preferred Qualifications:
 
Design and test experience in Analog/RF technology
Master’s Degree in Electrical or Computer Engineering from an accredited institution
Excellent written and verbal communication skills
DOD, SCI, or SSBI clearance
 
Job Number: x20200038
Job Location: Manhattan Beach, CA
Rate: $75/hr
Duration: up to 1 year
Input Date: 04/22/2020
Last Updated: 07/02/2020
Firm Name: XPEERANT
Attention: Woody Arnold
Address: 4308 N GARFIELD AVE
City, State: LOVELAND, CO 80538
Phone: 970/282-9287
Email: woody@xpeerant.com
Website: www.xpeerant.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Principal Electrical Engineer Circuit Design 4 - URGENT CA

Description:
1843 Sr. Principal Engineer Circuit Design 4 (Job Number: 20003804)
Number of Openings: 5
Location(s): United States-California-Manhattan Beach

United States-California-Redondo Beach
Shift: 1st Shift
Target Start Date: Mar 2, 2020

Target End Date: Dec 31, 2021

Pay Rate: $75 to $80/hr
Work Schedule:9/80
Duration of Assignment: Up to 1 year

The Ground Systems Development Department in Manhattan Beach, CA is seeking a talented electrical engineer to develop and integrate complex electronic Test Sets and hardware units. The hardware development responsibilities include architecture design, detailed design, test, integration, customer briefings, and post-delivery support of satellite system Test Sets and ground units. The candidate will work closely with other engineering functions, including Flight Engineering, Systems Engineering, Product Engineering, Production, and Procurement to meet schedule and design requirements. The ideal candidate has a broad range of experience with design, integration, and test of Digital and Analog circuits, PCBs, drawers, FPGAs, units, and subsystems and is capable of leading a small team.


Basic Qualifications:
Bachelor’s Degree in Electrical or Computer Engineering, or another STEM degree from an accredited institution plus 9 years of experience in an Engineering Environment; OR, a minimum of 7 years of experience with a Master’s Degree in STEM
Design and test experience in digital technology

Preferred Qualifications:
Design and test experience in Analog/RF technology
Master’s Degree in Electrical or Computer Engineering from an accredited institution
Excellent written and verbal communication skills
 
Job Number: JK-1843ATO
Job Location: Manhattan Beach, CA
Rate: 80/hr max
Per Diem: pd split possible
Duration: 9 months +
Input Date: 03/26/2020
Last Updated: 05/01/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Process / Welding Engineer

Description:
** Candidates must be U.S. Citizens without Dual Citizenship **
** This is a Temp-to-Hire position. If the selected candidates perform well they will be converted to direct employees **
** Candidates must be able to interview in-person at their own expense if not local **

Duties:
50% - Oversee and troubleshoot critical weldments ensuring best practices for weld fit-up, cleanliness requirements and weld parameters are followed.
15% - Develop weld parameters and document best practices to support production.
15% - Perform statistical process analysis of welding processes.
10% - Define weld machine/specification requirements.
5% - Perform root cause analysis and disposition discrepant hardware.
5% - Accurately report problems, solutions, and results, in concise written and oral communications. Communicate effectively between team members and customer counterparts.

Skills:
1. Experience working with Torch Weld Jigs (TWJ), setting weldments up for exact shrinkages to fit TWJ post weld.
2. Experience dispositioning hardware and performing root cause analysis.
3. Process capability and statistical analysis experience.
4. Previous experience developing weld parameters for manual and In-Place-Tube or Automatic G.T.A. welding or E.B. welding.
5. Familiarity working with electronic planning, drawings, and pertinent documents such as weld parameters.
6. Demonstrated teaming skills.
7. Strong analytical and communication skills (written and oral) are required, along with the ability to lead teams and work in a collaborative team environment.
8. Experience using appropriate PPE.

Experience with the following is a plus:
1. Working with D17.1 or Journeyman Weld certifications.
2. Writing weld machine specifications.
3. Using electronic planning and drawings.
4. Moving large structures or hardware.

Education:
1. Requires a Bachelor's degree in Weld Engineering, Mechanical Engineer, Industrial Technology and 5 years of experience in aerospace working with nickel, stainless, ferrous and aluminum alloys, or an equivalent combination of education and experience.
 
Job Number: 12216
Job Location: Canoga Park, CA
Rate: $37.00 - $43.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: Temp-to-Hire
Start Date: ASAP
Input Date: 04/14/2020
Last Updated: 04/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Staff Engineer ASIC/FPGA (VHDL) Designer CA

Description:
Staff Engineer ASIC/FPGA (VHDL) Designer (Job Number: 20004560)
Number of Openings: 4
Location(s): United States-California-Redondo Beach

Shift: 1st Shift
Target Start Date: Mar 30, 2020
Target End Date: Mar 26, 2021

Pay Rate: $90/hr
Work Schedule: 9/80
Duration of Assignment: Up to 1 year

This position is based at our Space Park campus in Redondo Beach, CA. Duties include VHDL design of ASIC and/or FPGA logic, verification via simulation and emulation (lab testing), synthesis, and timing analysis.

Additional responsibilities include:
Designs and develops circuits used in electronic devices. device evaluation and characterization, test box design, prototype construction and checkout, and determination of wafer fabrication processes. Prepares test methods and specifications; analyzes equipment to establish operating data and conducts experimental tests; provides finished device approval; and prepares customer application information.

Basic Qualifications:
- Bachelor’s Degree in Electrical or Computer Engineering from an accredited institution with minimum of 14 years of experience with Logic Design in VHDL or Verilog; or 12 years of experience with Masters Degree

Preferred Qualifications:
- Hands-on lab experience with testing of digital hardware is highly desired
- Experience with Digital Signal Processing (DSP)
- 15 years or more of digital Logic Experience
 
Job Number: JK-1848ATO
Job Location: Redondo Beach, CA
Rate: 90/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 02/11/2020
Last Updated: 05/01/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Staff Engineer Digital Board Design

Description:
Chipton-Ross is seeking a Staff Engineer Digital Board Design for an opportunity in Redondo Beach, CA

RESPONSIBILITIES:
Northrop Grumman is looking for an experienced digital board designer to join its team at the Redondo Beach, CA location.
Tasks of this role include Digital Signal Processing Architecture, particularly focused on MODEM design. The qualified candidate will be a digital DSP design engineer who will work on digital hardware development with applications in signal processing, modem design for air and space applications.
Responsibilities include but are not limited to:
Digital Hardware Development.
Simulation (Communications, signal processing).
Requirements development & flow down.
Work with other designers, such as FPGA designer to help implement design.
Help develop test plans for testing developed hardware.

REQUIRED EXPERIENCE:
Bachelors of Science degree in a STEM field from an accredited institution with a minimum of 10 years of experience.
A minimum of 10 years of experience in DSP hardware design development.
Must have DSP Simulation experience (must show).
Preferred Qualifications:
15 years of experience developing/testing Electronics for military or spacecraft applications, 10 of those in DSP design.
Digital or Mixed signal unit, slice, board, and/or ASIC/FPGA design and development experience.
Master's or PhD degree in Electrical or Computer Engineering or other Engineering field from an accredited institution.
Hands-on knowledge of programmatic/cost account management (CAM) processes, project planning and scheduling, cost control, change control, EVMS, staffing, coordination and oversight of technical work effort.
Proven leadership experience and the ability to manage engineers and technicians in a process driven environment.
Exceptional communication skills (verbal, written, presentation) across all levels of the organization.

EDUCATION:
Bachelors of Science degree in a STEM field from an accredited institution is required.
Master's or PhD degree in Electrical or Computer Engineering or other Engineering field from an accredited institution is preferred.

HOURS:
9/80 workweek.

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 184631
Job Location: Redondo Beach, CA
Rate: $85 to $95.00 DOE
Duration: 1 year
Input Date: 02/07/2020
Last Updated: 07/02/2020
Firm Name: CHIPTON ROSS
Attention: Robert Davis
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: rdavis@chiptonross.com
Website: www.chiptonross.com

Staff Engineer Digital Board Design

Description:
Tasks of this role include collaboration with systems engineering, mechanical and electrical engineers to perform Digital Unit Development. The qualified candidate will be a digital design engineer who will work on digital hardware development with applications in signal processing, modem design, network routing and switching, or embedded processors for air and space applications. Responsibilities include but are not limited to:

-  Digital Hardware Development
-  Coordination with other design specialties such as packaging engineering
-  Requirements development & flow down
-  Support test Hardware development
-  Interface analysis
-  Board/unit Integration & test

Qualifications:

Basic Qualifications:


 - Bachelors of Science degree in a STEM field from an accredited institution with a minimum of 14 years of experience or 12 years of experience with a Masters Degree.
- A minimum of 14 years of experience in hardware design development or production
- Must be able to obtain and maintain an active U.S. Government security clearance

Preferred Qualifications:
 
 - 15 years of experience developing/testing Electronics for military or spacecraft applications
- Digital or Mixed signal unit, slice, board, and/or ASIC/FPGA design and development experience
- Master’s or PhD degree in Electrical or Computer Engineering or other Engineering field from an accredited institution
- Hands-on  knowledge of programmatic/cost account management (CAM) processes, project planning and scheduling, cost control, change control, EVMS, staffing, coordination and oversight of technical work effort
- Proven leadership experience and the ability to manage engineers and technicians in a process driven environment
- Experience in program execution and demonstrated ability to meet program technical, cost, and schedule milestones
- Exceptional communication skills (verbal, written, presentation) across all levels of the organization
 - Security Clearance (any level) 
 
Job Number: x20200037
Job Location: Redondo Beach, CA
Rate: $90/hr
Duration: up to 1 year
Input Date: 04/20/2020
Last Updated: 07/02/2020
Firm Name: XPEERANT
Attention: Woody Arnold
Address: 4308 N GARFIELD AVE
City, State: LOVELAND, CO 80538
Phone: 970/282-9287
Email: woody@xpeerant.com
Website: www.xpeerant.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Staff Engineer Digital Board Design CA

Description:
Staff Engineer Digital Board Design (Job Number: 20004461)
Number of Openings: 4
Location(s): United States-California-Redondo Beach

Shift: 1st Shift
Target Start Date: Mar 30, 2020
Target End Date: Mar 26, 2021

Pay Rate: $85 to $90/hr
Work Schedule: 9/80
Duration of Assignment: Up to 1 year

Tasks of this role include Digital Signal Processing Architecture, particularly focused on MODEM design. The qualified candidate will be a digital DSP design engineer who will work on digital hardware development with applications in signal processing, modem design for air and space applications. Responsibilities include but are not limited to:

- Digital Hardware Development
- Simulation (Communications, signal processing)
- Requirements development & flow down
- Work with other designers, such as FPGA designer to help implement design
- Help develop test plans for testing developed hardware

Basic Qualifications:
- Bachelors of Science degree in a STEM field from an accredited institution with a minimum of 10 years of experience;
- A minimum of 10 years of experience in DSP hardware design development
- DSP Simulation experience

Preferred Qualifications:
- 15 years of experience developing/testing Electronics for military or spacecraft applications, 10 of those in DSP design
- Digital or Mixed signal unit, slice, board, and/or ASIC/FPGA design and development experience
- Master’s or PhD degree in Electrical or Computer Engineering or other Engineering field from an accredited institution
- Hands-on knowledge of programmatic/cost account management (CAM) processes, project planning and scheduling, cost control, change control, EVMS, staffing, coordination and oversight of technical work effort
- Proven leadership experience and the ability to manage engineers and technicians in a process driven environment
- Exceptional communication skills (verbal, written, presentation) across all levels of the organization
 
Job Number: JK-1847ATO
Job Location: Redondo Beach, CA
Rate: 85-90/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 02/11/2020
Last Updated: 05/01/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Staff Engineer Digital Board Design CA

Description:
Staff Engineer Digital Board Design (Job Number: 20004358)
Number of Openings: 4
Location(s): United States-California-Redondo Beach

Shift: 1st Shift
Target Start Date: Mar 2, 2020

Target End Date: Feb 26, 2021

Pay Rate: $85 to $90/hr
Work Schedule: 9/80
Duration of Assignment: Up to 1 year

Client is looking for an experienced digital board designer to join its team at the Redondo Beach, CA location.

Tasks of this role include collaboration with systems engineering, mechanical and electrical engineers to perform Digital Unit Development. The qualified candidate will be a digital design engineer who will work on digital hardware development with applications in signal processing, modem design, network routing and switching, or embedded processors for air and space applications. Responsibilities include but are not limited to:

- Digital Hardware Development
- Coordination with other design specialties such as packaging engineering
- Requirements development & flow down
- Support test Hardware development
- Interface analysis
- Board/unit Integration & test

Qualifications

Basic Qualifications:
- Bachelors of Science degree in a STEM field from an accredited institution with a minimum of 14 years of experience or 12 years of experience with a Masters Degree.
- A minimum of 14 years of experience in hardware design development or production

Preferred Qualifications:

- 15 years of experience developing/testing Electronics for military or spacecraft applications
- Digital or Mixed signal unit, slice, board, and/or ASIC/FPGA design and development experience
- Master’s or PhD degree in Electrical or Computer Engineering or other Engineering field from an accredited institution
- Hands-on knowledge of programmatic/cost account management (CAM) processes, project planning and scheduling, cost control, change control, EVMS, staffing, coordination and oversight of technical work effort
- Proven leadership experience and the ability to manage engineers and technicians in a process driven environment
- Experience in program execution and demonstrated ability to meet program technical, cost, and schedule milestones
- Exceptional communication skills (verbal, written, presentation) across all levels of the organization
 
Job Number: JK-1846ATO
Job Location: Redondo Beach, CA
Rate: 85-90/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 02/11/2020
Last Updated: 05/01/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stock Assistant - no clearance NY

Description:
167566 Job Title: Stock Assistant

Work Site Address: Owego, NY 13827
Job Number: 3243-1
Max Pay Rate: $17.00/hr
Start Date: 2/24/2020
End Date: 2/24/2021
Position Type: Contract

Job Summary:
Stockroom worker faithfully follows standard process and safety procedures to perform a variety of stockroom functions that may include counting and verifying material received, filling back orders, packaging materials for stock, physically storing materials away, picking materials from stock to fill specific order quantities, performing other standard stock-keeping functions, while always being diligent to safeguard and prevent damage to all materials handled.

* Completes various system transactions.
* Carefully handles a variety of materials including ESD-sensitive components and hardware that range in size from less than 1 mm to over 2 feet cubed, and weighing 35 lbs or more.
* Validates system and document data visually to the physical material and count, and identifies any discrepancies.
* Performs hand counting and may use scales to ensure accuracy of counts.
* Operates various material-handling equipment, including horizontal carousels, ESD workstations, electronic scales, bag sealers, pallet jacks, and carts, along with skids, pallets and tote pans to complete work tasks.
* Uses a variety of packaging and handling methods to protect the materials from damage.
* Works with good housekeeping habits.
* Uses professional, ethical behaviors in all dealings with co-workers and internal customers on a variety of needs.
* Shifts from one work task to another, as directed, without difficulty.
* May be asked to work overtime beyond the standard work shift or on weekends, once fully trained on job tasks.

Qualifications and Education Requirements
* Safety-minded work habit
* Highly accurate workmanship, great attention to details, and thorough double-checking to ensure accuracy
* Willingness to faithfully follow the documented processes
* Good written and oral communication skills
* Good interpersonal skills with co-workers and customers
* Able to operate a computer and learn how to execute required transactions in the inventory system
* Able to learn the process steps of each task and complete the required training
* Willingness to faithfully follow the documented processes
* Capable of repetitive lifting of packages to OSHA guidelines, with no physical restrictions
* Able to stand and sit for extended periods of time
* Able to kneel, squat, bend down, stretch, walk, climb stairs and ladders, and carry materials repeatedly through the day
* Capable of fine motor/manual dexterity, strong grip, and repetitive movements and tasks
* Able to push and pull loads with material handling equipment
* Have reliable transportation to and from work
* May be asked to work overtime beyond the standard work shift or on weekends, once fully trained on job tasks.
Desired Skills
* High school diploma or equivalent
* Familiarity with Microsoft Office Applications (e.g. Outlook, Excel, Word)
* Experience in electronic component stockrooms (especially in the Defense Industry)
* Capable of obtaining/maintaining Forklift certification (stand-up reach-type) if needed
* Recent training in Electrostatic Discharge (ESD), Foreign Object Debris (FOD), Personal Protective Equipment (PPE), experience and training with Environmental, Safety and Health (ESH) procedures

Skills: Category Name Required Importance Experience
Soft Skills Interpersonal Skills Yes 1 1 - 2 Years
Soft Skills Oral and Written Communication Skills Yes 1 1 - 2 Years
Technical Skills Basic Computer Skills Yes 1 1 - 2 Years

Qty 2 positions
This person needs to be prepared to work either first or second shift as hiring need demands.
 
Job Number: LMRMS-3243-1
Job Location: Owego, NY
Rate: 17/hr max
Duration: 12 months
Input Date: 02/04/2020
Last Updated: 05/01/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Supplier Quality Engineer - Direct Hire

Description:
Major functions:

In this role, the Supplier Quality Engineer (SQE) will support and interface across functional disciplines including Program Management, Supply Chain, Manufacturing and Engineering personnel. The SQE will be an active and significant contributor in the evaluation, development and monitoring of key Suppliers and Subcontractors, create Quality requirements, participate in the generation and review of requirements, and validate flow down of expectations. The SQE will communicate and ensure our Suppliers and Subcontractors understand stated requirements, have the capability to consistently and predicatively meet, and provide conforming products and services. Will manage Supplier and Subcontractor performance and validate the implementation of effective procedures, test methods, and process controls, geared toward risk mitigation. Proactively monitor, analyze, report on, and participate in the improvement of Supplier and Subcontractor process and product performance. Lead failure analysis, complex problem solving and corrective action efforts, and drive the development of technical solutions. Participate and/or lead improvement efforts and as a member of cross-functional teams. While acting as a conduit between the external source and internal resources.

Lead the verification, validation and acceptance of proposed product design and Supplier and Subcontractor process changes. As needed, participate in the review and disposition of nonconforming product while representing the organization as a prime technical resource. SQE will perform Supplier and Subcontractor audits and follow-up assessments as needed.



Education/Experience/Licenses etc.:

Bachelors Degree and minimum 6-years of prior relevant experience or Graduate degree in Engineering, Business or Technical discipline and a minimum of 4-years of prior related experience, preferably in a high volume optical and/or electro-mechanical manufacturing organizations with focus on government, military and law enforcement products.

Extensive technical expertise in either thermal technology, lasers, optics, machining/molding, and/or electronics is required, as is a proven work history in project leadership and technical problem solving.

Experience in Advance Product Quality Planning (APQP) a plus.

Must be a self-starter and able to adjust quickly to changing priorities and assignments. Intermediate to advanced SPC/Data analysis skills and proven ability to perform DOE, FMEA, ANOVA and Gage R&R analysis a strong plus.

 
Job Number: 20-04845
Job Location: Londonderry, NH
Rate: 60.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2020-02-24 00:00:00.0
Input Date: 02/07/2020
Last Updated: 03/26/2020
Firm Name: NESCO RESOURCE
Attention: Paul Chacon
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
System Engineer / E5 F-35 Subject Matter Expert Electronic Warfare / F-35 Reprogramming Labs Systems Engineering- Clearance TX

Description:
166702 Job Title: System Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2395-1
Max Pay Rate: $113.00/hr
Start Date: 10/29/2019
End Date: 1/29/2021
Position Type: Contract

Job Summary:
This position is intended to serve as a technical lead in interfacing with Laboratory customers, developing technical solutions, system requirements decomposition, performing system analysis and trade studies, supplier technical reviews and support, supporting system integration planning, system integration and verification activities that are necessary to successfully complete milestones leading up to the full verification, validation and delivery of the F-35 product capabilities as needed.

Reprogramming Labs Systems Engineering position. The primary responsibility of this position is to serve as Electronic Warfare (EW) Subject Matter Expert to perform System Requirements and Design development as well as support Hardware-In-Loop system integration on laboratory systems.
The responsibilities of technical leadership will include mentoring and teaching less experienced engineering staff to grow an EW technical competency with our organization. This position will require close coordination with Project Leadership and with Joint Program Office (JPO) representatives, plus proactive engagement with L&TS simulation software, subsystem procurement, hardware development teams, and other teams both inside and outside of the company, to ensure an effective system engineering communication interface is established and maintained across the different subsystems development teams.

Qualifications and Education Requirements
BS+11 YRS or MS+9 YRS
This req is at an E5 level. With a focused skill in Electronic Warfare (EW).

Preferred Skills
Skills: Category Name Required Importance Experience
Areas of Expertise Design & Release No 1 2 - 4 Years
Areas of Expertise Engineering No 1 6 + Years
Software Skills DOORS No 1 4 - 6 Years
Software Skills MS Office - Intermediate Level No 1
Technical Skills Engineering No 1
Technical Skills Engineering Release No 1 4 - 6 Years

Qty 1 position
 
Job Number: JE-2395-1S6
Job Location: Fort Worth, TX
Rate: 113/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 03/02/2020
Last Updated: 03/10/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
System Engineer PCIe communication Bus

Description:
*This is a full time, 6-12 month contract position located in Nashua, NH*



We are hiring for a contract communications Bus system engineer for a PCIe Express project. Candidate will create requirements for systems PCIe communication, between interface test module and electronic modules such as the EWC and EWP. Project is for developing a new product for and aerospace application that will involve electrical engineering and require the applicant to develop the set of requirements for an instrumentation Bus card



Daily duties may include performing research, analyze criteria, conducting trade studies to determine the architectural approach, and help support the design and integration of the instrumentation module.



Required:
*15 years’ experience developing/integrating test instrumentation hardware for PCIe bus communications.
*Strong hands on PCIe Bus design, integration and troubleshooting/debugging experience.

*Active Secret Clearance (within the last 2 years)
*Engineering degree (EE preferred)



Pluses:
*Experience in test instrument programming.
*Electronic weapon systems electronics integration
*Experience writing or troubleshooting PCIe drivers.
*Knowledge of HTT instrumentation cards.
 
Job Number: 554
Job Location: Nashua, NH
Rate: $95.00
Per Diem: yes split
Input Date: 01/23/2020
Last Updated: 02/07/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technician - no clearance MA

Description:
166647
Job Title: Technician

Work Site Addres: Marion, MA 02738
Job Number: 2462-1
Max Pay Rate: $25.00/hr
Start Date: 11/4/2019
End Date: 11/4/2020
Position Type: Contract

Job Summary:
Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems.

Works from schematics, engineering drawings and written or verbal instructions. Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions. Exclude technicians working in production or quality assurance.

Qualifications and Education Requirements
This position does not require a BS Degree.
Technician experience

Skills: Category Name Required Importance Experience
Technical Skills Technician knowledge No 1 < 1 Year Qty 1 position Hiring Manager is looking for someone with Technician experience
 
Job Number: LMRMS-2462-1
Job Location: Marion, MA
Rate: 25/hr max
Duration: 12 months
Input Date: 10/21/2019
Last Updated: 05/01/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technician - no clearance WA

Description:
167500 Job Title: Technician

Work Site Address: Bothell, WA 98021
Job Number: 3106-1
Max Pay Rate: $26.00/hr
Start Date: 2/6/2020
End Date: 2/5/2021
Position Type: Contract

Job Summary:
Building and testing of various laser components (optical, mechanical, and electrical) in support of engineering development and pilot production.

Roles and Responsibilities
The engineering technician will work closely with other technicians and engineers in executing tasks that could include cable harness assembly, subassembly & box level assembly / test, thermal testing, fiber optic splicing, and other similar assembly and test tasks both in the R&D labs and on the pilot production line.
The engineering technician will also support the upkeep of the labs including ordering consumable supplies, tracking calibrated equipment, and other similar tasks.

Qualifications and Education Requirements
BA Degree is NOT required

Basic Qualifications:
Experience in wire harness build and routing.
Mechanical assembly history and familiarity with electrical systems and circuit boards.
Attention to detail, good interpersonal skills, ability to multitask, good organizational skills, computer literacy, and a demonstrated ability to work well in a team environment.
Ability to read blue prints, schematics, and drawings and following verbal and written instructions.
Experience reading work instructions and performing tasks as per instructions.

Desired skills:
Educational background and/or experience in electronics or optics.
Experience running, testing, and measuring lasers or complex optical systems.
Experience in handling fiber, fiber splicing equipment including fiber polishing equipment.
Experience in testing and troubleshooting electrical systems and replacing electrical connectors, terminal lugs, and wires
Experience in testing analog, power electronics, RF, and digital circuits.

Skills: Category Name Required Importance Experience
Areas of Expertise Electrical Troubleshooting Yes 2
Areas of Expertise General Assembly No 2
Areas of Expertise Testing Lab Experience No 2
Technical Skills Basic Computer Skills Yes 2
Technical Skills Soldering No 9


Qty 1 position
 
Job Number: LMRMS-3106-1
Job Location: Bothell, WA
Rate: 26/hr max
Duration: 12 months
Input Date: 02/03/2020
Last Updated: 03/24/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

UG Designer

Description:
With electronic packaging
 
Job Location: MI/WI/TX
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: jgleason@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wire Design & Install Engineers : AL, OK, WA states

Description:
Multiple Positions Below

1. Wire Design & Install Engr 4

Location: Huntsville, AL
Duration: 8 Months

Job Description:
Develops and maintains cable/wire harness detail and assembly designs. Analyzes results and performs design reviews. Leads the team to analyze results and performs design reviews. Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Documents processes, specifications and procedures that support the design and manufacture of electrical commodities. Develops complex statements of work, metrics, schedules and budgets. Performs technical review of supplier capabilities to facilitate source selection. Works under minimal direction.

Education / Experience:
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

Skill Code: 679-Electrical/Electronic Installation Design

Creo- That is the CAD software that is needed for Alabama location


-----------------------------------------------------------------


2. Wire Design & Install Engr 5

Location: Oklahoma City, OK
Duration: 6+ Months

Description:
Provides guidance in the development of cable/wire harness detail and assembly designs. Provides guidance in the development of electrical product detail, assembly and installation designs. Provides direction used by multiple teams to analyze complex results and performs design reviews. Provides guidance in engineering design disposition on discrepancies. Defines processes, specifications and procedures that support the design and manufacture of electrical commodities. Provides direction used by multiple teams to develop complex statements of work, metrics, schedules and budgets. Directs the technical review of supplier capabilities to facilitate source selection. Directs the development of functional and physical design requirements to ensure complete integrated design architecture. Works under consultative direction.
OKC Electrical Harness/Cable Group is seeking senior electrical harness/cable engineers. The candidate will mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for client Military Aircraft, Military Derivative Aircraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, B-1B, B-2, B-52 and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft harness/cable design on the various platforms.

This position provides an excellent opportunity to develop new solutions, help grow and mentor the next generation of engineers, and guide the candidates' career towards the submittal of a candidacy for a position in the Technical Fellowship.

Other Job Responsibilities May Include:
- Provides guidance in the development of cable/wire harness detail and assembly designs.
- Provides guidance in the development of electrical product detail, assembly and installation designs.
- Provides direction used by multiple teams to analyze complex results and performs design reviews.
- Provides guidance in engineering design disposition on discrepancies.
- Defines processes, specifications and procedures that support the design and manufacture of electrical commodities.
- Provides direction used by multiple teams to develop complex statements of work, metrics, schedules and budgets.
- Directs the technical review of supplier capabilities to facilitate source selection.
- Directs the development of functional and physical design requirements to ensure complete integrated design architecture.
- Works under consultative mentorship.

Client is the world's largest aerospace company and leading manufacturer of commercial airplanes and defense, space and security systems. We are engineers and technicians. Skilled scientists and thinkers. Bold innovators and dreamers. Join us, and you can build something better for yourself, for our customers and for the world.

Basic Qualifications (Required Skills and Experience):
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 14 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+9 years' related work experience, Master+12 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

Must possess good organizational, interpersonal, and problem-solving skills. Must have demonstrated a strong work ethic and sense of urgency for completing assigned work with a history of meeting commitments. Ability to adjust priorities to multiple demands and unanticipated events.

Highly motivated and must work well in a team environment. The ability to communicate effectively, both verbally and in writing

Skill Code: 652-Wiring Design



-----------------------------------------------------------------

3. Wire Design & Install Engr (Level 3, 4, 5)

Location: Tukwila, WA
Duration: 6+ Months

Description:
Wire Harness Installation Design is a unique opportunity to use both electrical and mechanical skills. This position also allows the possibility to see your released engineering be installed while supporting the build during shipside support. Job duties during the design phase include analyzing functional schematics and wire diagrams to understand system design. Developing and maintaining cable/wire harness detail and assembly designs. Performing design reviews to validate spatial integration and requirements verification. Developing and maintaining electrical product details, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry). During the build phase, provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Works under general direction.
Come join Client Commercial Derivative Airplanes in Tukwila, WA with the unique opportunity to work on the next generation platforms. At Client, our engineers use their expertise to create innovative next generation capabilities for a wide variety of amazing aerospace platforms and products. In joining this program, you will be part of an outstanding team of technical designers & engineers making history as we shape this one of a kind next generation Aircraft.

Position Responsibilities:
- Develops, maintains and releases electrical/mechanical drawings, systems designs or engineering documentation and data by applying company, industry and governmental standards.
- Using design tools prepares documentation and incorporates design changes.
- Creates, develops and maintains systems designs by preparing design layouts, modifying existing designs and assisting in identifying design discrepancies.
- Supports engineering system design and functionality validation activities.
- Develops and maintains product installation designs and part designs ranging from simple to moderately complex.
- Coordinates activities and products with internal partners and external suppliers.
- Works under general direction.

Basic Qualifications (Required Skills and Experience):
- Designing or supporting electrical wire harness Installations
- Education/experience typically acquired through advanced technical education from an accredited course of study in Electrical or Mechanical engineering, computer science (e.g. Bachelor) and typically 14 or more years' related work experience or an equivalent combination of technical education and experience (e.g. Master+12 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

Preferred Qualifications (Desired Skills/Experience):
- Active security clearance is preferred
- Client Defense Experience preferred but not required

Skill Code: 679-Electrical/Electronic Installation Design
 
Job Location: Oklahoma CIty, OK
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 months
Start Date: asap
Input Date: 02/03/2020
Last Updated: 03/02/2020
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wire Design & Install Engr 2, 3

Description:
Wire Design & Install Engr 3

Location: Kennedy Space Center, FL/ Ridley Park, PA
Duration: 12+ Months

Job Description:
Develops and maintains cable/wire harness detail and assembly designs. Analyzes results and performs design reviews. Develops and maintains electrical product detail, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry, antennas).Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Documents processes, specifications and procedures that support the design and manufacture of electrical commodities. Develops basic statements of work. Participates in technical review of supplier capabilities to facilitate source selection. Analyzes functional and physical input to assure development of complete integrated design. Works under general direction. Familiarity with wire harness design and electronic unit placement for aerospace applications desired. Unigraphics NX CAD experience required.

Education / Experience:
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 5 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD, Master+3 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

Skill Code: 679-Electrical/Electronic Installation Design
 
Job Location: Kennedy Space Center, FL
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 months
Start Date: ASAP
Input Date: 10/17/2019
Last Updated: 03/02/2020
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wire Design & Install Engr 4

Description:
Wire Design & Install Engr 4

Location: Huntsville, AL/Oklahoma City, OK/Ridley Park, PA
Duration: 8 Months

Job Description:
Develops and maintains cable/wire harness detail and assembly designs. Analyzes results and performs design reviews. Leads the team to analyze results and performs design reviews. Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Documents processes, specifications and procedures that support the design and manufacture of electrical commodities. Develops complex statements of work, metrics, schedules and budgets. Performs technical review of supplier capabilities to facilitate source selection. Works under minimal direction.

Education / Experience:
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

Skill Code: 679-Electrical/Electronic Installation Design

***CREO is required***
 
Job Number: 20-01213
Job Location: Huntsville, AL
Per Diem: split
Overtime: possible
Duration: 8 months
Start Date: 02-14-2020
Input Date: 02/20/2020
Last Updated: 02/28/2020
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 4620 E 53RD ST
City, State: DAVENPORT, IA 52807
Phone: 312/502-4795
Website: www.iconma.com

Back to Advanced Job Search