Job Search Results

389 listings were found that matched your search words: Keywords: Electronic ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2024/03/28 Thursday 02:01PM Pacific Time by ContractJobHunter. )

Listings 1 - 389

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
#35707 Die Cast Maintenance Technician

Description:
Die cast machine maintenance technician

Contract Type - Full Time

Industry - Automotive

Job location - Sparta Illinois
Start - Immediate
Compensation - To be determined by the individual experiences and qualifications
Overtime - Negotiable
Visa Sponsorship - None
Relocation Assistance - Negotiable

Job Requirement
Required:
- High School/GED
- Two-year Machine Technology degree or similar degree/certification
- Knowledge of general foundry practices
- Solid experience in troubleshooting maintenance and repair on a variety of Machines including realignment and adjustments to machinery
- Experience in programming and troubleshooting PLC's and electronic equipment
- Strong mechanical and electrical troubleshooting skills
- Ability to read and interpret blueprints and machine control schematics
- Must be flexible and willing to work any shift schedule including overtime and weekends as necessary.
- Stand, climb, bend kneel and stoop to perform repairs of tooling and other equipment for most of the 8-hour shift depending on assignments.
- Use moderate physical effort in the use of hand tools, wrenches, hoists, pry bars, hammers, etc.
- Carry weights of up to 50 lbs occasionally for short periods.

Job Duties
SUMMARY
Ensures operation of machinery and mechanical equipment by performing maintenance on machines; following diagrams, sketches, operations manuals, manufacturer's instructions, and engineering specifications; troubleshooting malfunctions.

DESCRIPTION
1. Analyzes machine problems by using troubleshooting techniques, repair manuals, drawings or manufacturer's specifications to determine logical approach to correct the problem.

2. Utilizes hand tools and test instruments such as voltmeter, ammeter, ohmmeter or micrometer caliper and dial indicators.

3. Tests electronic components and circuits to locate defects.

4. Replaces defective components and wiring.

5. Aligns, adjusts and calibrates machines according to specifications.

6. Maintains records of repairs, calibrations and tests.
7. Fabricates parts if not commercially available, using machine and hand tools common to the trade. Writes parts list for equipment repairs.
 
Job Number: 35707
Job Location: Sparta, IL
Rate: TBD
Per Diem: No
Overtime: Yes
Duration: Permanent
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NSR GROUP
Attention: NSR Group
Address: 655 METRO PL S STE 600-44
City, State: DUBLIN, OH 43017
Phone: 614/798-0671
Fax Phone: 614/439-4932
Website: www.nextsr.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
#35712 Support services technician

Description:
(2 positions available)
Advertiser Type Direct employment by the client company

Contract Type - Full Time
Industry - Automotive

Job location 1 - Mexico, Missouri, USA
Job location 2 - Hannibal, Missouri, USA
Please indicate which location you are interested in.
Start - Immediate
Compensation - To be determined by the individual experiences and qualifications
Overtime - Negotiable
Visa Sponsorship - None
Relocation Assistance - Negotiable

Job Requirement
- High School/GED
- Certificate from technical/trade school or relevant work experience to qualify for industrial “journeyman” status in the electrical, electronic, or mechanical fields. Must pass BMCT testing.
- 2+ years related experience.
- Must be capable of interpreting blueprints and use the proper instrumentation necessary to repair and install machinery.
- Stand, climb, bend kneel and stoop to perform repairs of all types on plant equipment for most of the 8-hour shift depending on assignments.
- Use moderate physical effort in the use of hand tools, wrenches, etc.
- Carry weights of up to 50 lbs occasionally for short periods.



Job Duties
SUMMARY
Provides electrical, electronic, mechanical and hydraulic repair and maintenance (including some fabrication). Performs support activities for die maintenance and machine shop functions.

DESCRIPTION
1. Repairs and maintains electrical, electronic, mechanical and hydraulic functions of the operating die cast machines including preventive and predictive maintenance.
2. Operates various machine shop pieces of equipment including lathes, drill presses, saws, hand tools meters, gauges, micrometers and computers.
3. Programs PLCs for the die cast machines and trim press operations as well as electronic, electrical and mechanical troubleshooting.
4. Performs sludge removal (removal of impurities) from the molten metal furnace using long-hand tools while dressed in protective headgear and protective clothing.
 
Job Number: 35712
Job Location: MO
Input Date: 11/14/2020
Firm Name: NSR GROUP
Attention: Next Step Resources
Address: 655 METRO PL S STE 600-44
City, State: DUBLIN, OH 43017
Phone: 614/798-0671
Fax Phone: 614/439-4932
Website: www.nextsr.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer - Level 3

Description:
Aeronautical Engineer - Level 3

Location: Lexington, KY
Rate: $55.00 - $65.00/HR
Duration: 6 month contract
Shift: 1st Shift

**MUST have an Active Secret Clearance or have had one with the last 2 years**

Description:
- Evaluates coupled solar radiation, airflow and conduction heat transfer by both classic methods and finite element analysis.
- Knowledge of a wide range of electronics equipment and cooling methods.
- Experienced in idealizing internal air flow and heat conduction paths into simplified representations to achieve efficient analysis. Determines appropriate boundary conditions, film coefficients and convection coefficients and is familiar with industry standard documents governing temperature requirements.
- Documents methods, calculations and results comprehensively and clearly, using industry standard substantiation format.

Skill/Experience/Education
Mandatory:
- BSME
- 10+ years of experience with Coupled Flow Field and Thermal/ANSYS
- Predominant and most recent experience in heat transfer

Desired:
- FEMAP/Microsoft office suite/Stress Analysis Background
 
Job Number: 7324
Job Location: Lexington, KY
Rate: $55.00 - $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer - Level 3 with active secret / Coupled Flow Field and Thermal/ANSYS/BSME KY

Description:
Aeronautical Engineer - Level 3
Description
Evaluates coupled solar radiation, airflow and conduction heat transfer by both classic methods and finite element analysis. Knowledge of a wide range of electronics equipment and cooling methods. Experienced in idealizing internal air flow and heat conduction paths into simplified representations to achieve efficient analysis. Determines appropriate boundary conditions, film coefficients and convection coefficients and is familiar with industry standard documents governing temperature requirements. Documents methods, calculations and results comprehensively and clearly, using industry standard substantiation format.
Skill/Experience/Education
Mandatory:

Coupled Flow Field and Thermal/ANSYS/BSME
Desired:

FEMAP/Microsoft office suite/Stress Analysis Background

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
Senior Heat Transfer Engineer Predominant and most recent experience in heat transfer 11 Years + Yes
 
Job Number: DW-0215
Job Location: Lexington, KY
Rate: 55-65/hr max
Duration: 6 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Expeditors - Hawthorne, CA

Description:
STS AeroStaff Services is currently hiring Aerospace Expeditors for open positions in Hawthorne, California.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Expedite parts to meet developed estimated completion dates
• Expedite parts through other departments to break any hold factor in support of late part delivery
• Expedite material from the receiving dock, stock rooms and buyers in support of late part delivery and deliver to using department
• Maintain weekly visibility on part shortages
• Support of Data Integrity in Company MRP system
• Support of Data Integrity in Visual and shop Floor Audits
• Control of Non-conforming Material / Return to Inventory / Stock Purge
• Expedite Off-site processing

Basic Qualifications:

• High school diploma is required
• Minimum 3 years’ of production control experience is required
• Minimum 3 years’ of experience in a production or manufacturing environment
• Minimum 3 years’ of experience working with an MRP system

Preferred Skills and Experience:

• Experience in aerospace, automotive, or consumer electronics manufacturing

Additional Requirements:

• Lifting up to 50lbs., standing, climbing, bending, grasping, sitting, pulling, pushing stooping, stretching and carrying are generally required to perform the functions of this position
• Must be available to work all shifts, overtime, and weekends, as required

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 38702
Job Location: Hawthorne, CA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembly Mechanic

Description:
 Looking for a candidate that has more of a “mechanical” background. This truly is targeting an entry level candidate with a mechanical aptitude (i.e. recently finished, or in process of finishing, trade school. Perhaps high school graduate with mechanical interest).
 There should also be a general understanding of blueprints

Summary

To perform moderately complex assembly of electronic and mechanical parts and assemblies in accordance with engineering drawings and specifications.

Responsibilities:

> Sets up and fabricates moderately complex electronic and mechanical assemblies utilizing various forms of written and oral instructions, automatic and semi-automatic machines and hand tools.
> Specific duties vary by workload and cover a range of assembly techniques including harness and cable fabrication, electro-mechanical assembly.
> Performs administrative tasks associated with assembly operations which include Manufacturing Order documentation, production problem transmittal generation, and shelf life maintenance.
> Resolves manufacturing problems.
> Maintains good housekeeping, safety standards, and calibration requirements.
> May set up production equipment.
> Practices Total Quality principles and concepts.

Qualifications:

> Entry level position with little or no experience required. High school diploma, or equivalent education or experience to demonstrate the ability to successfully perform the job duties.
> Specialized and extensive experience in mechanical assembly techniques.
> Military and commercial quality specifications.
> Manufacturing policies and procedures.
> Ability to read and interpret complex instructions, procedures, and engineering drawings/specifications.
> Ability to use measuring instruments, set-up/operate fabrication equipment in work area(s) & plan and organize work.
> Ability to concentrate while discriminating colors & small details, good hand/eye coordination & Finger/hand dexterity.
> Knowledge of shop math and ability to apply math skills.
> Electrostatic discharge procedures and methods.
> Ability to work well with others employing team principles.
> Must be able to work in small confined areas, be flexible in work hours and be able to lift up to 20 to 30 pounds
> All requirements are subject to possible modification to reasonably accommodate individuals with disabilities.
> Applicants selected will be subject to a government security investigation and must meet eligibility requirements, including US Citizenship, for access to classified information.


Mark A Ludwig
Vice President / Sr. Account Executive
Global American Staffing
Email: mludwig@globalams.us
Direct: (508) 434 – 6180
Office: (508) 230 – 5030 x123
www.globalamericanstaffing.com
 
Job Number: 014_2017
Job Location: Cockeysville, MD
Rate: DOE
Per Diem: Split Possible
Overtime: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark A Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineers - Wichita, KS

Description:
STS AeroStaff Services is currently hiring Avionics Engineers for Temp-to-Perm positions in Wichita, Kansas.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

Responsible for performing technical and administrative engineering tasks to secure and sustain FAA regulations, assist in leading projects to provide continued leadership for systems and equipment integration on aircraft supporting performance and reliability improvements.

Job Duties:

• Active Listening - Ability to actively attend to, convey, and understand the comments and questions of others
• Accuracy - Ability to perform work accurately and thoroughly
• Accountability - Ability to accept responsibility and account for his/her actions
• Communication - Ability to communicate effectively with others using written or oral communication
• Prepare engineering drawings, reports, analyses, correspondence and data to be used for FAA certification of new and existing STC modifications and PMA parts
• Customer Oriented - Ability to take care of the customers' needs while following company procedures
• Coordinate FAA approvals of PMA, STC, major/minor design changes and repairs
• Detail Oriented - Ability to pay attention to the minute details of a project or task
• Interface directly with the FAA in various areas such as aircraft certification, flight standards, manufacturing inspection and continued airworthiness
• Enthusiasm - Ability to maintain high energy level in every contact
• Direct meetings and technical presentations
• Ethical - Ability to demonstrate conduct conforming to a set of values and accepted standards
• Perform checks of drawing quality
• Friendly - Ability to exhibit a cheerful demeanor toward others
• Oversee drawing release system and filing
• Honesty/Integrity - Ability to be truthful and be seen as credible in the workplace
• Maintain engineering files and company records
• Motivation - Ability to be a self-starter with the ability to work unsupervised in or out of the office
• Positive and innovative input toward company objectives
• Organized - Possessing the trait of being organized or following a systematic method of performing a task
• Maintain FAA safety procedures
• Reliability - The trait of being dependable and trustworthy
• Ability to work on aircrafts electronic and software systems
• Safety Awareness - Ability to identify and correct conditions that affect employee safety
• Field and management support
• Tactful - Ability to show consideration for and maintain good relations with others
• Project oversight
• Build and maintain positive client relationships
• Lead engineering R&D projects using appropriate personnel and test resources
• Manage the implementation, coordination and reporting for programs or contracts
• Interface with company technicians and outside vendors/suppliers to develop product design specifications and optimize production processes

Qualifications:

• Recent AutoCAD experience required
• Bachelors’ degree in Engineering or equivalent experience
• Professional Engineer (PE) Certification a plus, but not required
• Prefers 7-10 years' experience in systems and equipment integration and/or design
• Develop timelines for the program
• Ability to meet deadlines and budget (project and time management)
• Proficient computer skills using Excel, Microsoft Outlook, and Word preferred
• Apply technical knowledge and/or programming skills in solving complex problems
• High level of confidentiality
• Must know the fundamentals of 14CFR and means of compliance with the regulations

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 38686
Job Location: Wichita, KS
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Technician/ Electronics Technician

Description:
Production Test Technician

Location: Marion, MA
Duration: 17-18 months

Description:
Candidates must be able to read schematic drawings and have a working knowledge of electronic testing.

Skill/Experience/Education
- Mandatory: Basic electronic theory, mechanical aptitude, electronic test experience
- Desired: Component level troubleshooting

Skill:
Electronic Troubleshooting 4-5 Years
 
Job Number: 17-08668
Job Location: Marion, MA
Rate: open
Per Diem: possible
Overtime: possible
Duration: 17-18 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Prakash Thakur
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
BSEE only/FPGA/Satellite Circuit Design in Dulles, VA #6874345AS

Description:
Recruiter to Contact: Adam Salazar
Job Title: Engineer III
Job Number: 6874345
Location: Dulles, VA
Compensation: DOE
Assignment Length: 12 month
VA31 45101 Warp Drive Bldg 1 Dulles VA 20166 United States

Educational/Background Requirement:

 BS in Electrical Engineering required.

 Candidate should have signal processing background and be proficient in signal
processing modeling tool (Matlab preferred).
 MINIMUM 15+ years of experience in satellite digital electrical engineering and testing
which must include at least 5 years in design of electronic circuits for use in harsh/space
environments.
 Must have Extensive experience in product development, planning and life cycle
management; requirements analysis, traceability and documentation and generation of
concepts of operation.

Description:
Core Functions

 Work with other digital designers, RF engineers and signal processing engineers as part
of an integrated product development team to implement signal processing algorithms
into FPGAs including the Xilinx and MicroSemi (Actel) families of products.
 Expert in high speed analog (GHz) and digital data acquisition circuit design including
simulation of analog, power and digital circuitry for space applications.
Expert in proper circuit board layout techniques for low EMI, EMC, and ESD constraints
pertaining to space systems.
 Expert in design of sensor interfaces and control electronics.
 Expert in use of Cadence ADW schematic capture and Sigrity PCB analysis tools.
 Extensive skills in operation of lab equipment, troubleshooting and bench testing of circuit
designs.
 Strong written and verbal communication skills required.
 Perform tasks which include algorithm development, performance modeling, end-to-end
simulation and implementation of digital signal processing within the communications
system.
 Design work will include high-level simulation using tools, such as MATLAB, and detailed
design work targeting specific hardware platforms. The modeling and simulation work will
include a combination of tackling hard signal processing problems to advancing the stateof-
the-art.
 Work in a lab environment on a variety of platforms including Xilinx FPGAs, and high
performance computing platforms.
 Work with other digital designers, RF engineers and signal processing engineers to
implement signal processing algorithms on digital radio subsystems.
Provide direct interface with program office and government personnel on a regular basis.
Requires excellent written and oral presentation skills.
 
Job Number: #6874345AS
Job Location: Dulles, VA
Rate: DOE
Duration: 12 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Adam Salazar
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Components Engineer - Level 2

Description:
Components Engineer - Level 2

Location: Dallas, TX
Rate: $60.00 - $65.00/HR
1 year contract


** MUST have ability to obtain a Secret security clearance**

Description:
- Contributes to successful project completion by participating in the resolution of issues such as conflicting design requirements, unsuitability of standard material, and difficult coordination requirements.
- Plans and conducts the analysis, inspection, design, test, and/or integration to assure the quality of products or components.
- Performs quality engineering reviews of design documentation for compliance with stated requirements, including vendor quality manuals and company quality records.
- Applies statistical process control (SPC) methods for analyzing data to evaluate the acceptability of components.


Skill/Experience/Education
Mandatory:
- Must be willing to accept a wide variety of work assignments supporting the total end-to-end process of capturing, designing, developing, testing, manufacturing, and life-cycle support of electronic systems.
- Responsible for the performance of detailed part level obsolescence management consisting of monitoring BOM’s, solving issues, scheduling and managing implementation of fixes, finding new sources, and reacting and solving issues to ensure no production line stoppages.
- Candidate will work closely with design engineers, interface with other functional areas and vendors, and enforce PMPCP Compliance.
- The candidate will periodically be required to make presentations to program management and customers.
- Must have parts management experience working with designers to select components for use in designs.
- Must have obsolescence experience working with component lists and industry tools to evaluate part availability and determining path forward when issues are identified.
- Must have ability to obtain a Secret security clearance.


Desired:
- Previous experience with obsolescence monitoring tools is a plus (i.e. Qstar, TacTech, Part Miner, Promiere) as well as expertise in all component technologies.
- Bachelors (or higher) Degree in Electrical Engineering, or other related technical discipline.
 
Job Number: 7156
Job Location: Dallas, TX
Rate: $60.00 - $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Components Engineer - Level 2 / Obsolescence / Parts Management / Must have ability to obtain a Secret security clearance TX

Description:
159492
MFC-1334
Components Engineer - Level 2
Dallas, TX
65/hr max
12 month contract
No Clearance

Description
Contributes to successful project completion by participating in the resolution of issues such as conflicting design requirements, unsuitability of standard material, and difficult coordination requirements. Plans and conducts the analysis, inspection, design, test, and/or integration to assure the quality of products or components. Performs quality engineering reviews of design documentation for compliance with stated requirements, including vendor quality manuals and company quality records. Applies statistical process control (SPC) methods for analyzing data to evaluate the acceptability of components.
Skill/Experience/Education
Mandatory:

Must be willing to accept a wide variety of work assignments supporting the total end-to-end process of capturing, designing, developing, testing, manufacturing, and life-cycle support of electronic systems. Responsible for the performance of detailed part level obsolescence management consisting of monitoring BOM’s, solving issues, scheduling and managing implementation of fixes, finding new sources, and reacting and solving issues to ensure no production line stoppages. Candidate will work closely with design engineers, interface with other functional areas and vendors, and enforce PMPCP Compliance. The candidate will periodically be required to make presentations to program management and customers. Must have ability to obtain a Secret security clearance.
Desired:

Previous experience with obsolescence monitoring tools is a plus (i.e. Qstar, TacTech, Part Miner, Promiere) as well as expertise in all component technologies. Bachelors (or higher) Degree in Electrical Engineering, or other related technical discipline.

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
Parts Management Working with designers to select components for use in designs. 0-3 Years Yes
Obsolescence Work with component lists and industry tools to evaluate part availability and determining path forward when issues are identified. 0-3 Years Yes
 
Job Number: JE-1334
Job Location: Dallas, TX
Rate: 65/hr max
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EMI - DO-160 Test Technician - Contract

Description:
DO-160 and Mil Std 461 – EMI Test Technician – Contract - Rockford

On behalf of our client Ingenium is recruiting and evaluating candidates for the position of EMI/EMC Test Technician. This is a 2-3-month contract position located in Rockford IL. Full time with overtime required up to 60 Hours

Must be a US person- No Visa Candidates can be considered

Multiple Test Technicians required – Contract and Contract to Hire potential
RESPONSIBILITIES:
• Ability to independently perform test set-ups, operate and adjust test equipment for EMI/EMC testing requirements. Work in a lab/ office environment. Set up and conduct precision testing following procedures and generating test data for analysis and reports.
REQUIREMENTS:
• Understanding of EMI/EMC related technology and equipment including Spectrum Analyzers, RF Amplifiers.
• Ability to use a systemic approach in the execution of EMC Control Plans, EMI Test Plans, procedures and reports.
• Results oriented with excellent time management skills.
• Excellent communication and interpersonal skills with team members and customers.
• Familiarity with DO-160 and Mil Std 461 a plus.
• Ability to function effectively in a team, in a dynamic, fast paced environment.
• Experience with military and aerospace testing a plus.
• Familiarity with seismic and EMI/RF testing a plus.
• Knowledge of industry test documents such as MIL/Aerospace standards desired.
• Overtime is required with second shift scheduling potential.

EXPERIENCE and QUALIFICATIONS:
• EMI lab test technician experience is primary requirement.
• Aerospace electronic lab test technician experience considered.
• Advance technical training or degree is a bonus.
• Compensation commensurate with qualifications.

Employment Criteria: This position includes access or potential access to ITAR technical data. Therefore, candidates will need to verify you are a US person.

Ingenium Technologies Corporation is a leading engineering services organization, providing outsourcing, consulting, and talent solutions.

Employment Statement: Ingenium Technologies is an equal opportunity employer and does not discriminate on the basis of race, color, religion, gender, age, national origin, disability, veteran status, sexual orientation, or any other classification protected by federal, state or local law. Proof of eligibility for employment will be required upon employment.

Additional Job Postings: http://www.ingeniumtech.com/jobs/
 
Job Number: 89712
Job Location: Rockford, IL
Rate: $35.00 +/hr.
Per Diem: Possible
Overtime: required
Duration: 3 months
Start Date: 2 weeks
Input Date: 11/14/2020
Firm Name: INGENIUM TECHNOLOGY
Attention: Dave Johnson
Address: 4216 MARAY DR UNIT A1
City, State: ROCKFORD, IL 61107
Phone: 815/315-9273
Fax Phone: 815/399-8804
Website: www.ingeniumtech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Electrical Engineer reports to the Engineering Manager. The Electrical Engineer plans, designs, and oversees the installation, operation and maintenance of electrical/electronic components, equipment, and systems. Furthermore, acts as a focal point/ individual contributor with respect to electrical and electromagnetic compatibility compliance to industry/regulatory requirements and standards for airborne applications such as RTCA DO-160 or MIL-STD-461E.
Electrical Engineer performs conventional, moderately complex engineering assignments that may involve component, equipment or product design, simulation, testing, and preparation of specifications, process studies, and/or research investigations. Instructions are provided on task specifications and design constraints. Close guidance on new design or applications is provided.


JOB RESPONSIBILITIES

• Applies standard engineering techniques involving only minor innovations of methodology to provide solutions to problems involving a limited number of variables.
• Performs low to medium complex circuit/wiring design activities and, subsequently, prepares appropriate validation and verification means.
• Supports product certification/qualification with subject matter knowledge and exercise professional judgment whilst supporting other business functions.
• Typically focuses on existing products or processes.
• Liaises with drafters, technicians, and others to contribute to project completion.
• Coordinates work with other engineers and operating groups to facilitate participation of various organizational units.
• Performs other related duties as required.



MINIMUM REQUIREMENTS:
• Bachelor's degree in Electrical Engineering from an accredited four-year college or university; and three-to-five years related professional experience and/or training; alternatively, an equivalent combination of education and experience.
• Aerospace industry experience is strongly preferred.
• Must be proficient with basic physical laws/techniques as applied in electrical engineering (e.g. Ohm’s Law, Kirchhoff’s Laws), electromagnetic characteristics of materials, electrical circuit theory, two-pole and four-pole theory, Maxwell equations, and basic linear/digital/power electronics.
 
Job Location: Everett, WA
Rate: Negotiable
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Level 3

Description:
Electrical Engineer - Level 3

Duration: 1 year contract
Pay Rate: DOE ($50/hr - $55/hr)
Location: Grand Prairie, TX
Shift: First, 9/80
*The engineer must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years)*

Job Description:
-Analog engineer is required to design a power voltage card to convert voltages between mature subsystems.
-The power voltage card will need to fit within an existing space.
-This effort will require part selection, design review, and design release.
-The engineer must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years).
-The engineer must be proficient in Cadence; have good communication skills.

Mandatory Skills:
-Must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years).
-Bachelors degree in Electrical Engineering with five or more years of experience.
-Must be willing to accept a wide variety of work assignments supporting the total end-to-end process of capturing, designing, developing, testing, manufacturing, and life-cycle support of electronic systems.
-Must possess strong general electrical engineering knowledge and be familiar with circuit design and components to include electronics testing and troubleshooting.
-Experience in electronic system and subsystem design and test, systems analysis, software-driven operations and test schemes.
-Strong electronic systems integration tasking, estimating, testing and excellent trouble shooting skills.
-Proficiency with electronic analyzers and other trouble shooting tools is required.
-Ability to develop system and subsystem performance requirements.
-Ability to use test equipment to support acceptance testing, manufacturing production and in-process testing, data processing and analysis.

REQUIRED Skill Matrix:
-Power regulation circuit design experience. Schematic entry. PSPICE analysis. Derating analysis. etc. : (9-10 years)
 
Job Number: 7065
Job Location: Grand Prairie, TX
Rate: 50.00-55.00
Per Diem: Possible
Overtime: Yes
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Level 3 with active secret TX

Description:
158440/1251
Electrical Engineer - Level 3
Grand Prairie TX
60/hr
Active Secret
12 months

Description
Analog engineer is required to design a power voltage card to convert voltages between mature subsystems. The power voltage card will need to fit within an existing space. This effort will require part selection, design review, and design release. The engineer must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years). The engineer must be proficient in Cadence; have good communication skills.
Skill/Experience/Education
Mandatory:

Must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years). Bachelors degree in Electrical Engineering with five or more years of experience. Must be willing to accept a wide variety of work assignments supporting the total end-to-end process of capturing, designing, developing, testing, manufacturing, and life-cycle support of electronic systems. Must possess strong general electrical engineering knowledge and be familiar with circuit design and components to include electronics testing and troubleshooting. Experience in electronic system and subsystem design and test, systems analysis, software-driven operations and test schemes. Strong electronic systems integration tasking, estimating, testing and excellent trouble shooting skills. Proficiency with electronic analyzers and other trouble shooting tools is required. Ability to develop system and subsystem performance requirements. Ability to use test equipment to support acceptance testing, manufacturing production and in-process testing, data processing and analysis.

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
Circuit Design Power regulation circuit design experience. Schematic entry. PSPICE analysis. Derating analysis. etc. 9-10 Years Yes
 
Job Number: JE-1251
Job Location: Grand Prairie, TX
Rate: 60/hr max
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer Sr.

Description:
Electrical Engineer Sr.

Location: Marion, MA
Pay Rate: DOE ($40/hr - $60/hr)
Duration: 6 month contract
Shift: First, 9/80
Travel: Mostly to Middletown, RI. Other locations could be anywhere, almost always CONUS.
**MUST have an ACTIVE SECRET CLEARANCE or have it turned on WITHIN 72 HOURS**

Description
-This business is in search of a highly skilled senior electrical engineering, (level 3) to join our team in Marion, MA. This role offers an exciting opportunity to join a top-tier employer known throughout the world for its engineering prowess, game changing product offerings, and robust solutions.
-The candidate will be a technical contributor for the Heavy-weight Torpedo (MK48 CBASS) Program, taking on the following responsibilities: production support, development, integration and test, qualification testing, etc.
-The person needs to have at least 5 years of experience developing, debugging, and supporting a production line for complex analog, or digital, or both electronic designs.
-Robust circuit design, analysis, simulation, functional testing, DVT, first article testing, and qualification testing will be performed.
-A wide variety of tasks will include working on an experienced EE Team, leading/directing technicians and junior engineers, performing component research, board level design and troubleshooting.
-The engineer will collaborate routinely with other engineering disciples.
-The candidate must be able to demonstrate a sustained history of many successful electronic designs.
-The engineer will write a variety of documents.
-A strong understanding of designing to withstand and succeed in environmental (thermal, vibration, humidity, etc.), electro-magnetic interference (EMI), and margin testing are part of the test scope.
-The candidate should possess a history of excellent performance reviews.
-Excellent multitasking skills are a must, as typically engineers here juggle several tasks/programs/ products simultaneously.
-The candidate must have excellent verbal and written communication skills and a strong ability to successfully work with customers, program management, engineering project managers, and within the multidisciplinary engineering and manufacturing teams.
-Some overtime and travel are required.
-In addition, the candidate will be involved with other strategic activities including bid and proposal writing, field demonstrations and testing, customer and internal management presentations.
-The candidate should be energetic, able to work independently, yet thrive in a team environment and have sound theoretical and practical experience as well as passion for analog and/or digital engineering.
-If the person is a digital specialist, considerable experience with programmable logic design is required.

Skill/Experience/Education (MANDATORY):
1. US Citizen 2. A security clearance 3. BSEE minimum
4. Outstanding ability to multitask
5. 5+ year history of complex design, testing, and troubleshooting skills and aptitude
6. Excellent written and verbal communication skills
7. The ability to work well in a team environment
8. Proficient with common laboratory engineering tools such as logic analyzers, oscilloscopes, power supplies, function generators, digital multi-meters, and other support equipment
9. Mastery of MS Office suite
10. Board Design: Analog and/or Digital Board Design Experience (6-8+ years required)

Desired:
1. Matlab, expertise with environmental, designing to mitigate electro-magnetic interference (EMI), and margin testing are required. LabView and leadership experience.
2. If analog EE: PSPICE, experience designing front end Sonar Receivers and EPDM. Systems Engineering experience is desired..
3. If digital EE: Expertise with high speed digital and signal integrity practices;
 
Job Number: 7280
Job Location: Marion, MA
Rate: 40-60
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ElectroMechanical Engineer - Level III

Description:
ElectroMechanical Engineer - Level III
Orlando, FL
1 Year Contract
$36.00-55.00/Hr

Job Description:
Hardware ElectroMechanical packaging design engineer will be responsible for the hardware development for missile and/or fire control electronics: specifically printed wiring board (PWB) and circuit card assembly (CCA) design as well as general packaging support. Activity will require cross functional coordination to complete PWB/CCA hardware design and integration for the designated weapon system. General qualifications: Researches, develops, and designs component, equipment, and networks for military applications. Candidate must have experience CCA and PWB design as well as the associated components and connectors.


Mandatory Skills:
Candidate must have a Bachelors degree from an accredited college in a related discipline, Proficient with Pro-E and/or Creo or other 3D software (such as Catia, Solidworks, etc), must be able to obtain a security clearance.


Desired Skills:
CREO,
 
Job Number: 7228
Job Location: Orlando, FL
Rate: 36.00-55.00/Hr
Per Diem: Possible Split
Overtime: Yes
Duration: 1 Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electromechanical Engineer level 3 / CREO FL

Description:
Job Title: ElectroMechanical Engineer Level 3
Job Number: 158987/1353
Location: Orlando, FL
Compensation: 55/hr
Assignment Length: 12 month contract
Ability to obtain secret clearance
non exempt


Description:

Hardware ElectroMechanical packaging design engineer will be responsible for the hardware development for missile and/or fire control electronics: specifically printed wiring board (PWB) and circuit card assembly (CCA) design as well as general packaging support. Activity will require cross functional coordination to complete PWB/CCA hardware design and integration for the designated weapon system.

General qualifications: Researches, develops, and designs component, equipment, and networks for military applications. Candidate must have experience CCA and PWB design as well as the associated components and connectors.

Skill/Experience/Education
Mandatory:

Candidate must have a Bachelors degree from an accredited college in a related discipline, Proficient with Pro-E and/or Creo or other 3D software (such as Catia, Solidworks, etc), must be able to obtain a security clearance.

Desired:

CREO
 
Job Number: DW-1353
Job Location: Orlando, FL
Rate: 55/hr max
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic Component Engineer

Description:
Electronics Component Engineer. This successful candidate will manage the selection, approval, documentation and use of electronic components in electronic products. This position provides support to circuit designers in the selection and application of high-reliability electronic parts for defense and commercial applications.

Qualifications:
' BS Engineering or related field.
' 5-10 years of experience in component engineering, with specialty in military, space, commercial and automotive component standards.
'
 
Job Number: MD 38130
Job Location: Hartford, CT
Rate: $72/hr
Per Diem: split
Duration: 1 year
Start Date: asap
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Jim Pyle
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic Drafters - East Aurora, NY

Description:
STS AeroStaff Services is currently hiring Electronic Drafters for open positions in East Aurora, New York.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

Under the general direction of the Supervisor of Drafting and the technical direction of either an Electronic Packaging Designer, or an Electronic Packaging Drafter, the incumbent assumes responsibility for the detail design of new electronic products and for modification of design of existing electronic products and test equipment.

Job Duties:

• This position includes preparation of electronic drawings from rough layouts and verbal instructions
• The incumbent must have a developing knowledge of electronic circuits and components, as well as fabrication methods, and must have skills for creating printed circuit art work from layouts
• He/She must be capable of drawing straightforward interconnects and assemblies having electronic and mechanical components and detailing all related drawings
• He/She may occasionally be responsible for liaison follow-up of electronic jobs in production
• The Electronic Drafter performs his duties with limited supervision and is free to act and make decisions within the framework of existing standards and procedures including client policy and good drafting practices
• His/Her duties will be approximately 75% routine and 25% creative; in which case, the incumbent finds it necessary to apply his knowledge and experience to new and different situations
• The Electronic Drafter has prime accountability to prepare complex detail drawings of electronic products and test equipment
• Occasionally prepares layouts that are not complex
• Prepares complex art work and printed circuit board drawings working from layouts
• Modifies existing electronic drawings, art work and printed circuit drawings

Qualifications:

• Associate’s degree plus 4 years’ experience in directly related drafting work
• Accuracy and neatness must be well developed

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 38196
Job Location: East Aurora, NY
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronics Systems Engineer

Description:
Unique Skills:
Aircraft power / electrical / avionic systems design, integration and implementation. (design, certification and system support)

Education/Experience:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Duties and Responsibilities:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area
 
Job Number: 24-162
Job Location: Savannah, GA
Rate: $58-$63/hr.
Per Diem: YES
Overtime: YES
Duration: 1 YR+
Start Date: ASASP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronics Systems Engineering Contractor

Description:
Electronics Systems Engineering Contractor

Location: Savannah, GA
Pay Rate: $55/hr - $63/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
-Aircraft power / electrical / avionic systems design, integration and implementation.
-Design, certification and system support

Job description:
-Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
-5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principal Duties and Responsibilities/Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 7054
Job Location: Savannah, GA
Rate: 55.00-63.00
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Entry Level Aircraft Inspectors - Inwood, NY

Description:
STS AeroStaff Services is currently hiring Entry Level Aircraft Inspectors for open positions in Inwood, New York.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

The candidate will be inspecting and review all final assembly and repairs on heavy duty and light weight storage containers, galley carts, ground handling equipment and heavy duty pallets. The pay rate is $18/hr.

Job Duties:

• Familiarize and proficient in retrieving information from customer, manufacturer and FAA technical data
• Repair and assemble FAA certified aircraft equipment including aluminum and lightweight containers, heavy duty pallets, ladders & ground handling equipment, and galley carts, according to manufacturer and company manuals
• Comply with FAA and company policies and procedures
• Ensure accurate and timely completion of work orders
• Ability to perform routine and non-routine tasks independently
• Maintain work area clean and free of debris, which may interfere with the proper function of any units undergoing maintenance
• Maintain safe and clean work environment
• Ensure and maintain company tools and equipment in service standard, report any damaged tools and equipment to Station Manager/Supervisor
• Ensure system security of the electronic recordkeeping system regarding their area of responsibility and changing password if there is a possibility of its being compromised
• Provide feedback/suggestion to improve customer satisfaction

Qualifications:

• Must have a current A&P license or Repair Man Certificate; any new graduate with an A&P will be considered

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 38650
Job Location: Inwood, NY
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
F5-GROUND TEST LABS-Grade 07

Description:
Structural lab technician capable of working from engineering drawings with limited guidance to fabricate, assemble, install, diagnose and repair hydraulic, mechanical and controls systems associated with test facilities required to support ongoing Engineering Ground Test Development programs.

Strong mechanical background and experience associated with Rotary Wing Aircraft hydraulics, mechanics, electronics and data acquisition systems preferred.

Must be able to read and interpret engineering mechanical drawings and fluid power schematics.
Must be able to assist with the buildup and monitoring of engineering laboratory facilities.
Must be able to assemble required fixtures and facility hardware.
Must be able to work on elevated work platforms.

PLEASE READ
If selected the supplier must provide verification of the candidate’s completion of Lock Out/Tag Out training and certification prior to start of assignment.
Requires approved safety shoes and safety glasses
Certification can be obtained via http://www.compliancetrainingonline.com/lockout_tagout.cfm.
 
Job Number: 17-704-1539
Job Location: Northeast
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
F6-ELEC. FLT CNTRL/SIM. LABS-Grade 07

Description:
FUNCTION
Assist with the buildup and installation of Flight Control, Avionic, and Simulation laboratory test facilities.

JOB DUTIES
1. Assemble required wiring harnesses, test boxes, and laboratory test equipment.

SKILLS/EXPERIENCE
- Experience with electrical and electronic fabrication.
- Must have experience with fabrication of Military style connectors and aircraft wiring harnesses and systems.
- Experience with all the tooling and dies required to terminate mil-spec wires
- Experience terminating EMI harness assemblies
- Experience fabricating wire harnesses
- Experience fabricating test sets
- Experience using hand tools, mechanical and electrical
- Experience with schematics and electrical diagrams
- Evidence of Lockout Tag Out Authorized training

OTHER REQUIREMENTS
- Requires Safety shoes
- Must be able to support extended shift operations, scheduled weekend work, possible shift changes.

PLEASE READ
If selected the supplier must provide verification of the candidate’s completion of Lock Out/Tag Out training and certification prior to start of assignment.
Certification can be obtained via http://www.compliancetrainingonline.com/lockout_tagout.cfm.
 
Job Number: 17-711-1396
Job Location: Northeast
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Field Service Engineer / Technician

Description:
* Candidates should be local to Imperial, CA 92251 or El Centro, CA 92243and open to traveling

Job Description:
The Field Service Engineer (FSE) will be responsible for the inspection, evaluation, diagnosis, maintenance and repair of the systems to ensure the fleet operates at optimal capacity.

Candidates must have a strong background in either:

A. Electronics and Information Technology with significant troubleshooting and repair experience on computer software and hardware driven ISR (intelligence, surveillance, reconnaissance) collecting systems. The FSE will collect field failure data, develop test procedures, execute tests, and consult with design engineers as necessary to remedy problems and drive necessary design changes. The FSE will also execute established acceptance test procedures to validate repairs were successful.

B. Electrical and Electro-Mechanical Systems with significant troubleshooting and repair experience on ISR (intelligence, surveillance, reconnaissance) collecting systems. The FSE will collect field failure data, develop test procedures using schematics and wiring diagrams, execute tests utilizing standard test instruments and hand tools, repair the system, and then validate repairs by using established acceptance test procedures.

Additionally the FSE shall perform system and sub-system testing as necessary to proactively identify issues that could occur during field deployment of the system, and coordinate and assist design engineers in developing solutions to these problems. The work activities will be performed in a shop environment.

Requirements:
> Receive training in the company?s manufacturing facility to understand the production, troubleshooting, and maintenance of the integrated surveillance product?s mechanical, electrical, and software subsystems.
> Perform the advanced troubleshooting and depot level maintenance to ensure prompt repair and achievement of contractually obligated operational availability metrics.
> Maintain a log of repair actions and incidents. Identify recurring issues where design or software modifications could lead to improved system availability and reduced maintenance costs, and prepare preliminary proposals for such modifications for review and discussion with the system design team.
> Verify accurate tracking of inventory.

CORE COMPETENCIES:

> Efficiency: Produce significant output with minimal wasted effort.
> Honesty/Integrity: Earns trust and maintains confidence. Does what is right.
> Organization & planning: Plans, organizes, schedules, and budgets in an efficient, productive manner. Focuses on key priorities.
> Attention to detail: Does not let important details slip through the cracks or derail a project.
> Flexibility: Adjusts quickly to changing conditions.
> Enthusiasm: Exhibits passion and excitement. Has a can-do attitude.
> Acts with a sense of urgency: Does not put off until tomorrow what can be accomplished today.
> Follows-through on commitments: Lives up to verbal and written agreements, regardless of personal cost.
> Proactivity: Acts without being told what to do.
> Teamwork: Reaches out to peers and cooperates with supervisors to establish an overall collaborative working relationship

EDUCATION / EXPERIENCE: (Qualifications and/or Requirements)

> Field Service Engineer requires a Bachelor�s degree in Engineering, Computer Science, Systems, or related technical discipline plus a minimum 5 years of experience
> Field Service Technician requires either an Associate�s degree in Engineering, Computer Science, Systems, or related technical discipline plus a minimum 5 years of experience OR a minimum 8 years of experience.
> Supporting systems for the defense industry or Customs & Border Patrol industry is a plus.
> Prior military experience or Customs & Border Patrol experience is a plus.
> U.S. Citizen only


Mark A Ludwig
Vice President / Sr. Account Executive
Global American Staffing
Email: mludwig@globalams.us
Direct: (508) 434 – 6180
Office: (508) 230 – 5030 x123
www.globalamericanstaffing.com
 
Job Number: 012_2017
Job Location: El Centro, CA
Rate: DOE
Per Diem: Split Possible
Overtime: YES
Duration: Long-Term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Liaison Engineer - Truck Chassis, Mirrors and Horns

Description:
We are currently seeking an experienced Liaison Engineer to engaged in a number of heavy truck suspension controls (conventional and electronic). Also be involved with other components such as exterior mirrors and horns. These projects that you'll be involved in, will be located onsite at the clients heavy truck engineering building. You'll be representing the OEM supplier vehicle products and supporting their engineering efforts.

Strong technical background, preferably with experience with one of the three product lines mentioned above. If no direct experience, then experience with heavy trucks and the technical aptitude to quickly learn our products
A minimum of 5 years heavy truck engineering experience
CAD capability (NX Siemens) a big plus
Strong people skills with the ability to develop the necessary relationships with our client's engineering, test, quality, service and purchasing contacts
Understand customer requirements and accurately communicate those back to OEM supplier
Background in quality systems and the ability to participate in the development of FMEAs.
Able to troubleshoot product issues on test and in-service vehicles and find solutions
Must be able to work independently and be an excellent communicator, both verbally and written
15% travel. Willing to spend the first two weeks of the assignment at our facility near Grand Rapids, Michigan to learn the products
The assignment could range from 6 months to indefinite depending upon the candidate and client ability to procure new client business
Education:
BSME: Required
 
Job Number: 3122
Job Location: Portland, ORE
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: Ongoing
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: OLSA RESOURCES INC
Attention: Dina Matar
Address: 3485 NE JOHN OLSEN AVE
City, State: HILLSBORO, OR 97124
Phone: 503/608-7895
Fax Phone: 503/608-7896
Website: www.olsaresources.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
P-8A Pilot - (MO) - ACTIVE SECRET

Description:
ACTIVE SECRET CLEARANCE REQUIRED TO START

This position will be located in St Louis, MO to support P-8A U.S. Navy and P-8 Australia program.
Selected candidate will support software delivery testing and device acceptance testing for the Operational Flight Trainer (OFT) devices, as well as, follow-on software upgrades to those devices. The candidate may cross train to other devices as well.
Candidate will be asked to support test activities for P-8A U.S. Navy and P-8 Australia training devices to include software and hardware acceptance testing at facilities in St. Louis, MO; Jacksonville, FL; Whidbey Island, WA and Australia with potential for new customers and devices including India and UK.
Responsibilities include:
* Write Acceptance Test Procedures (ATPs)
* Work with Simulator supplier to perform testing prior to delivery to Boeing on flight simulator to ensure quality is high
* Perform testing on simulator once converted from a 737 to a P-8 to ensure the simulator functions as per the aircraft in a Level D environment
* Test previously discovered anomalies to ensure they were in fact fixed
* Write test reports
* Support development teams as the SME related to Flight Operations
* Mentor/Cross Train other team members
The successful candidate will:
* Review/edit subsystem and system level requirements and design.
* Create and status discrepancy reports for failed requirements.
* Analyze, review, and validate test data and acceptance test procedures.
* Prepare and publish user-level documentation, customer-based presentations, and tracking metrics.
* Listens and demonstrates understanding; clarifies meaning for others; speaks with clarity and precision; able to communicate with a diverse audience; writes clearly and concisely.
* Interface with other members of project or program teams, management, and technical staff to define and implement engineering solutions.
* Work under minimal direction.
Requirements ( must have to be qualified.)
This position must meet Export Control compliance requirements, therefore a “US Person” is required.
This position requires an active (or ability to obtain) U.S. Secret Security Clearance, for which the US Government requires US Citizenship.
This position requires selected candidate to reside in the St Louis, MO area or be willing to relocate at own expense.
Previous experience as a 737/P-8/P-3 pilot.
Ability to test and be familiar with anti-submarine/anti-ship capabilities of the P-8 in the flight simulator.
Assets (Preferred/ nice to have. Lacking does not disqualify applicants.)
Preferred candidates should have a minimum of a Technical bachelor's degree in one of the following fields: Computer Science, Aviation Management, Math, Computer Programming, Systems Engineering or Systems Integration.
Pilot Instructor experience in P-8A, P-3C, or other airborne Anti Submarine Warfare (ASW) capable platform.
Operational experience with deployed P-8A.
P-8 training systems experience.
Experience using P-8A Aircrew Training Devices (such as WTT, PTT, OFT, MSDT, Electronic Classrooms (ECs).

Technical bachelor’s degree and typically 5 or more years’ related work experience or a Master’s degree with typically 3 or more years’ or a PhD degree or an equivalent combination of education and experience. A technical degree is defined as any four year degree, or greater, in a mathematic, scientific or information technology field of study.
 
Job Number: 25617-1
Job Location: Hazelwood, MO
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 9-12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Assurance Engineer

Description:
Quality Assurance Engineers needed to develop, modify, apply and maintain quality evaluation and control systems and protocols for processing materials into partially finished or finished hardware on highly complex electro-optical, electronic & mechanical spaceflight assemblies. Works under general supervision. Follows established procedures. Work is reviewed for soundness of technical judgment, overall adequacy and accuracy. Duties more specifically include the coordination of support activities across multiple programs that range from inspections, associated with incoming material and build of assemblies, to review of test setups against procedure and data against pass fail criteria. Interface with customer quality representatives for build and test activities. Participate on Material Review Board and Failure Review Board meetings; provide drawing reviews, test procedure reviews and customer interface to these activities. Insure design modifications or updates meet all quality requirements while sitting as a member on the Configuration Control Board. May coordinate supplier support across multiple programs and will travel to suppliers to perform hardware inspections.

Required Experience
5-8 years of quality engineering experience on spaceflight programs or MS degree with 3-7 years of quality engineering experience • Must be able to be certified to NASA-STD-8739.1, 2, 3 and 4 or have current certifications • Willing to work periodic on-call support over off-shifts, weekends and holidays • Willing to work different shifts as needed throughout the year • Willing to travel to suppliers 2-4 days at a time 5 – 10 times/year • Considerable knowledge of quality control methods and procedures, military specifications as they apply to the electronics industry, reliability requirements of electronic, mechanical and electromechanical equipment and surveillance methods and procedures. • Basic knowledge of manufacturing, materials, contract administration, industrial, test and design engineering.

Desired Skills
• Experience with TipQA • Familiar with Configuration Control Management • Efficient with GD&T • Previous experience managing accounts • Small team leadership experience • Experience with performing Failure Analysis (FA) utilizing the necessary electrical tests and measurements, plus many of the advanced analytical techniques of physics, metallurgy, and chemistry
 
Job Number: AG-NJ-HAR
Job Location: Clifton, NJ
Rate: 50-65/hr DOE
Per Diem: Split
Overtime: Yes
Duration: 6-12+ mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: ENTEGEE ENGINEERING TECHNICAL GROUP
Attention: Andy Gill
Address: 5620 INTERNATIONAL PKWY
City, State: NEW HOPE, MN 55428-3047
Phone: 763/577-9000
Fax Phone: 763/577-9010
Website: www.entegee.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Engineer

Description:
Primary Responsibility:
Work directly with our customer, providing technical support as they conduct source inspection of product prior to shipment.
• Field customer questions relating to product being inspected.
• Review product, and research drawings and specifications in order to answer questions.
• Review any discrepancies identified by the customer. Confirm or refute findings based on the technical data.
• Interface with Program Engineering personnel as necessary to address technical issues.
• Interface with Program Quality and Inspection personnel to ensure that appropriate actions are taken to address confirmed findings.
• Assist in root cause investigations.
• Assist customer with product handling as required.
• Interface with program team members to provide/receive information.
• Attend meetings with program team and customers.
• Customer personnel may be foreign nationals. Communication of technical data is restricted and may constitute an export.
- Provide written technical summaries for communication via approved channels.
- Maintain a log of all issues and results for communication via approved channels.
• Provide program metrics to management.
• Help apply lessons learned to other programs.
• Provide reports and feedback to management.
Secondary responsibilities include:
• Warranty evaluation
• Distribution center process auditing.
• Collecting and analyzing data.

Experience Preferred:
Basic Qualifications
• 5 years minimum practical work experience in aerospace quality or engineering
• 3 years minimum experience with quality control methods and techniques, in relation to aircraft components and parts, including knowledge of the following:
• Dimensional inspection, including GD&T and inspection methods.
• Drawing/Blueprint and Specification Interpretation
• Quality assurance provisions and appearance of special processes (for example, shot-peening, welding, plating, coating).
• Manufacturing processes.
• First article, in-process, and final assembly inspections.
• Destructive and nondestructive inspections.
• Airworthiness assurance.
• Implementation of quality control systems and procedures, especially AS9100.
• Testing procedures.
• Use of FAA-approved type design data.
The qualified individual must:
• possess effective interpersonal skills.
• be able to work equally well independently or with a team.
• be able to balance and prioritize their workload effectively.
• possess strong verbal and written communication skills.
• possess effective problem solving skills.
• possess basic computer skills, including experience using MS Office, and the ability to quickly learn to use custom company software.
• possess a command of the English Language - spoken and written.

Desired skills:
Desired commodity-specific knowledge - the more, the better...
• Machined Parts
• Castings/Forgings
• Electronics/Avionics/Wiring Harnesses
• Elastomeric & Vulcanized Assemblies
• Sheet Metal Fabrication
• Composites
• Hydraulics
• Gears/Splines
• Bearings
• Hoses & Tubes - Fuel/Hydraulic

Education:
Bachelor’s degree from an accredited college in a related discipline
 
Job Number: CT37913
Job Location: Nort Haven, CT
Rate: $43.00
Per Diem: Possible
Overtime: Possible
Duration: 6 months
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Bill Carriveau
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
RF Engineer

Description:
Seeking a RF Engineer for an opening in Mason, OH.

RESPONSIBILITIES:
Currently seeking an RF Engineer (Contractor) with a broad range of experience that supports the analysis, design, implementation, optimization, and enhancement of RF equipment for launch vehicle and satellite communication systems. The successful candidate needs an understanding of detail design issues involved with RF design for mixers, filters, low-power driver amplifiers and power amplifiers for S-band and X-band frequencies. The individual will use simulation tools such as Microwave Office as well as RF test equipment. The individual will apply knowledge of component-level design for transistors, filters, mixers, oscillators and RF switches and will use test equipment to measure S-parameters, noise figure, intercept point, compression point, switching speed, and phase noise on electrical circuits and integrated assemblies.
• Design prototypes and provide sustaining engineering support for custom RF assemblies and sub-systems to customer specifications.
• Design, test, and troubleshoot RF sub-systems, integrated RF assemblies, and components through use of circuit analysis tools such as MWO.
• Evaluate, develop, and document new circuit and/or design techniques.
• Guide technicians on test, tune, debug, and optimization of prototype circuits and components to meet specification requirements and manufacturing requirements.
•Ability to plan effectively using various scheduling tools, flexibility and adaptability to changing priorities and assignments, ability to maintain confidentiality.

REQUIRED EXPERIENCE:
• Five (5) years of related experience in designing, testing and troubleshooting RF sub-systems and integrated RF assemblies and components is required.
• Experience with RF design for circuits such as synthesizers, oscillators, mixers, filters, drivers and power amplifiers at S-band and/or X-band frequencies.
• Working knowledge of analog electronics, detailed design knowledge of RF theory and application, knowledge of RF test procedures.
• Ability to use Microsoft Office applications, knowledge of circuit computer aided circuit design tools and circuit simulators (such as Microwave Office, Pspice, Mathcad, Matlab).

ADDITIONAL EXPERIENCE:
Aerospace experience, especially working with flight critical systems desired.

EDUCATION:
Accredited bachelor’s degree in Electrical Engineering or a related engineering degree is required. A master’s degree is preferred.

WORK SCHEDULE
1ST SHIFT
9/80 WORK WEEK
 
Job Number: 163209
Job Location: Mason, OH
Rate: $50.00
Duration: 12 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: CHIPTON ROSS
Attention: Debbie Aubert
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Receiving Inspectors - Hawthorne, CA

Description:
STS AeroStaff Services is currently hiring Receiving Inspectors for open positions in Hawthorne, California.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Approves or rejects items and documents inspection results as required
• Performs documentation review and verification of certifications, specifications, and conformance to design and specification requirements
• Communicates with internal customers, and suppliers as required to resolve inspection discrepancies
• Use electronic ERP system to route parts and components to proper departments

Basic Qualifications:

• High School Diploma or GED required
• 1+ year receiving inspection experience is required
• Requires the ability to read and interpret engineering drawings and specifications using ASME 14.5
• Experience with Microsoft Word, Outlook and Excel

Preferred Skills and Experience:

• Capable to operate a forklift and other related inventory equipment
• Experience within the aerospace, automotive, semiconductor, or electronic fields

Additional Requirements:

• Ability to lift 25-30 lbs., lifting, standing, climbing, bending, grasping, sitting, pulling, pushing, stooping, stretching, and carrying are generally required to perform the functions of this position
• Must be open to work any 1st or 2nd shift: 1st Shift (A) – Su, M, T, W, Th – 5:00am – 3:30pm; 2nd Shift (B) – T, W, Th, F, Sa – 5:00am – 3:30pm; 2nd Shift (W) – F, Sa, Su, M – 3:00am – 3:30pm; 2nd Shift (A) – Su, M, T, W, Th – 3:30pm – 2:00am; 2nd Shift (B) – T, W, Th, F, Sa – 3:30pm – 2:00am; 2nd Shift (W) – F, Sa, Su, M – 3:00pm – 3:30am and overtime as necessary

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 38647
Job Location: Hawthorne, CA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
SD-Tech Pubs-LSA-3.Advanced

Description:
The Canadian Maritime Helicopter Program (CMHP) Program is looking for a talented and motivated Logistics Support Analyst to support the development and sustainment of the CMHP CH-148 Publications. Candidate will report directly to the CMHP Integrated Product Team (IPT) Lead - LSA personnel. The maintenance program is developed in the Client
Maintainability System (SAMS) and provides the framework for the maintenance publications. The Technical manual series for this program is prepared in accordance with S1000D authoring specification and delivered in an Interactive Electronic Technical Manual (IETM) product. This IETM contains principles of Operation, Maintenance, Illustrated parts Breakdown, and
Testing/Troubleshooting procedures inclusive of system diagnostics.

The primary purpose of the Logistic Support Analysis process is to provide up-front design influence to enhance overall aircraft supportability and operational readiness, while reducing the life cycle cost. The overall objectives of the Logistic Support Analysis are to establish, validate and update the maintenance concept for the entire aircraft life cycle.

The Logistic Support Analyst position requires technical knowledge of the UH-60/S70, SH-60/S70B, S-92/H92 helicopters with experience involving a broad knowledge of Helicopter / Aircraft mechanics, electrical/electronics maintenance and support functions including Component Inventory, Trade Studies, Data Analysis, and Modeling. The position also involves the application of Logistic principles to support Helicopter Maintenance and related support functions which includes Electrical / Electronic/Mechanical System Operational Analysis, and Maintenance Tasking. Familiarity with engineering drawing interpretation, maintainability and reliability principles, assembly and disassembly methods and manufacturing and inspection methods is required.
 
Job Number: 17-705-1514
Job Location: Northeast
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Assembly Mechanic

Description:
 Looking for a “mechanical” candidate, not electrical. There should be familiarity with equipment (i.e. drill presses, rivet guns, etc.).
 Primarily searching for experience with engines, as this candidate will be tearing down aircraft engines and preparing for rebuild. Mechanical assembly can be considered, but focus is on Aircraft/Military/or possibly automotive engines.

Summary

To perform moderately complex assembly of electronic and mechanical parts and assemblies in accordance with engineering drawings and specifications.

Responsibilities:

> Sets up and fabricates moderately complex electronic and mechanical assemblies utilizing various forms of written and oral instructions, automatic and semi-automatic machines and hand tools.
> Specific duties vary by workload and cover a range of assembly techniques including harness and cable fabrication, electro-mechanical assembly.
> Performs administrative tasks associated with assembly operations which include Manufacturing Order documentation, production problem transmittal generation, and shelf life maintenance.
> Resolves manufacturing problems.
> Maintains good housekeeping, safety standards, and calibration requirements.
> May set up production equipment.
> Practices Total Quality principles and concepts.

Qualifications:

> 5+ years of related experience with a high school diploma, or equivalent education or experience to demonstrate the ability to successfully perform the job duties.
> Specialized and extensive experience in mechanical assembly techniques.
> Military and commercial quality specifications.
> Manufacturing policies and procedures.
> Ability to read and interpret complex instructions, procedures, and engineering drawings/specifications.
> Ability to use measuring instruments, set-up/operate fabrication equipment in work area(s) & plan and organize work.
> Ability to concentrate while discriminating colors & small details, good hand/eye coordination & Finger/hand dexterity.
> Knowledge of shop math and ability to apply math skills.
> Electrostatic discharge procedures and methods.
> Ability to work well with others employing team principles.
> Must be able to work in small confined areas, be flexible in work hours and be able to lift up to 20 to 30 pounds
> All requirements are subject to possible modification to reasonably accommodate individuals with disabilities.
> Applicants selected will be subject to a government security investigation and must meet eligibility requirements, including US Citizenship, for access to classified information.


Mark A Ludwig
Vice President / Sr. Account Executive
Global American Staffing
Email: mludwig@globalams.us
Direct: (508) 434 – 6180
Office: (508) 230 – 5030 x123
www.globalamericanstaffing.com
 
Job Number: 015_2017
Job Location: Cockeysville, MD
Rate: DOE
Per Diem: Split Possible
Overtime: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark A Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Assembly Mechanic

Description:
* Looking for a “mechanical” candidate, not electrical. There should be familiarity with equipment (i.e. drill presses, rivet guns, etc.).
* Primarily searching for experience with engines, as this candidate will be tearing down aircraft engines and preparing for rebuild. Mechanical assembly can be considered, but focus is on Aircraft/Military/or possibly automotive engines.

Summary

To perform moderately complex assembly of electronic and mechanical parts and assemblies in accordance with engineering drawings and specifications.

Responsibilities:

> Sets up and fabricates moderately complex electronic and mechanical assemblies utilizing various forms of written and oral instructions, automatic and semi-automatic machines and hand tools.
> Specific duties vary by workload and cover a range of assembly techniques including harness and cable fabrication, electro-mechanical assembly.
> Performs administrative tasks associated with assembly operations which include Manufacturing Order documentation, production problem transmittal generation, and shelf life maintenance.
> Resolves manufacturing problems.
> Maintains good housekeeping, safety standards, and calibration requirements.
> May set up production equipment.
> Practices Total Quality principles and concepts.

Qualifications:

> 5+ years of related experience with a high school diploma, or equivalent education or experience to demonstrate the ability to successfully perform the job duties.
> Specialized and extensive experience in mechanical assembly techniques.
> Military and commercial quality specifications.
> Manufacturing policies and procedures.
> Ability to read and interpret complex instructions, procedures, and engineering drawings/specifications.
> Ability to use measuring instruments, set-up/operate fabrication equipment in work area(s) & plan and organize work.
> Ability to concentrate while discriminating colors & small details, good hand/eye coordination & Finger/hand dexterity.
> Knowledge of shop math and ability to apply math skills.
> Electrostatic discharge procedures and methods.
> Ability to work well with others employing team principles.
> Must be able to work in small confined areas, be flexible in work hours and be able to lift up to 20 to 30 pounds
> All requirements are subject to possible modification to reasonably accommodate individuals with disabilities.
> Applicants selected will be subject to a government security investigation and must meet eligibility requirements, including US Citizenship, for access to classified information.


Mark A Ludwig
Vice President / Sr. Account Executive
Global American Staffing
Email: mludwig@globalams.us
Direct: (508) 434 – 6180
Office: (508) 230 – 5030 x123
www.globalamericanstaffing.com
 
Job Number: 020_2017
Job Location: Cockeysville, MD
Rate: DOE
Per Diem: Split Possible
Overtime: Yes
Duration: +/-12 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark A Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Electronics Assembler

Description:
Notes from Hiring Manager: Hours are 7:00 AM to 3:30 PM

* Looking to hire four (4) Senior Electronics Assembler's that specifically have 4 – 5 years of Cable & Harness Experience
* They should be familiar with crimpers / military connectors, solder sleeves, and daisy chains
* RF Cable Experience and Commercial experience/HVAC/PC Boards/Etc. are not relevant

Summary:

Looking for a Senior Electronics Assemblers to perform complex assembly of harnesses, cables and electronic parts and assemblies in accordance with engineering drawings and specifications.

Responsibilities:

> Sets up and fabricates complex electronic assemblies utilizing various forms of written and oral instructions, automatic and semi-automatic machines and hand tools.
> Specific duties vary by workload and cover a range of assembly techniques including very complex harness and cable fabrication, electro-mechanical assembly.
> Performs administrative tasks associated with assembly operations which include Manufacturing Order documentation, production problem transmittal generation, and shelf life maintenance.
> Resolves complex manufacturing problems.
> Maintains good housekeeping, safety standards, and calibration requirements.
> Sets up production equipment.
> Practices Total Quality principles and concepts.

Qualifications:

> 5+ years extensive experience specialized in building harnesses, cables & electronic assembly techniques.
> Military and commercial quality specifications.
> Planning, leadership, and organization skills.
> Ability to read and interpret complex instructions, procedures, and engineering drawings/specifications.
> Ability to apply cost/quality control methods & set up/operate all fabrication equipment in area assigned.
> Ability to concentrate while discriminating colors & small details.
> Excellent math skills, hand / eye coordination and finger / hand dexterity.
> Electrostatic discharge procedures and methods.
> Ability to work independently, as well as working well with others.
> High School diploma, or equivalent education (GED) with the ability to successfully perform the job duties.
> MUST BE US CITIZEN
 
Job Number: 004_2018
Job Location: Cockeysville, MD
Rate: DOE
Per Diem: Split Possible
Overtime: Yes
Duration: 12 +/- Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark A Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer with active secret CA URGENT

Description:
AERO REQ 0392 158396
Software Engineer-N
Description
Contribute to aircraft design, configuration development, feasibility and risk analyses, and technology maturation plans from the Flight Control and Vehicle Management Systems (FC&VMS) perspective. Define, Develop, analyze and coordinate FC&VMS requirements with other flight sciences disciplines as well as ground and flight test, reliability & maintainability, system safety, and other personnel. Close coordination with the propulsion community is required for flight control and for ground testing. Develop models and simulations as needed for design and analysis. Perform trade studies and define preliminary requirements for VMS architecture components. Design mechanical and electronic interfaces to support integration and test. Define high level software requirements.
Skill/Experience/Education
Mandatory:


Current SECRET clearance
MATLAB/Simulink;. Significant Flight Controls and Flight Simulation experience. Complex organization and documentation skills are required Good oral and written communication skills are required as is the ability to flex and adapt in a fast-paced team environment
Desired:

Bachelor's Degree in Electrical, Mechanical or Aerospace Engineering
 
Job Number: JE-0392
Job Location: Palmdale, CA
Rate: 65-70/hr
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer with active secret CA URGENT

Description:
Lockheed Martin Aero 0406
Recruiter to Contact: Jeana Edrozo
Job Title: Software Engineer - N
Job Number: 159142
Location: Palmdale, CA
Compensation: 65-70/hr
Assignment Length: Palmdale, CA
Security Clearance Secret (Prime Contract:, Can start w/o clearance:No, Interim Clearance Sufficient:No)
Non Exempt

Description:


The Skunk Works (Lockheed Martin Advanced Development Programs) is seeking world class talent in Mission Systems and Software to be a part of a team that will carry on our 70 year tradition of making history in advanced aircraft development.

The selected applicant will utilize advanced technical concepts in support of software products within Advanced Development Programs (ADP).

The applicant will be responsible for the design, development, integration, and testing of airborne avionics embedded software, ground-based application software, and/or simulation software.

Applicant must be able to support the full software development life cycle

– including requirements and configuration management

- and work in a mature software process environment.

The position requires interfacing with various disciplines, including Systems Engineering and Integration & Test.

Applicant must be capable of independently designing and creating software solutions based on limited information on rapidly evolving projects.

This role requires a highly motivated, organized engineer that is familiar with all aspects of mission systems development.

Applicant must have excellent oral and written communication skills.

The applicant may gain experience in avionics subsystems such as navigation guidance, data links, communication links, stores management, weapons integration, mission computers, electronic warfare, serial interfaces, analog and digital I/O, and networking.

Skill/Experience/Education
Mandatory:

Experience programming in C++; Experience with Sensors and/or Datalinks

Desired:

Scripting languages and GUI development ;Distributed Interactive Simulation (DIS) standards;

TS/SCI and/or DoD Top Secret Preferred;

RF Comms; Network programming ;

OpenGL/DirectX
 
Job Number: JE-0406
Job Location: Palmdale, CA
Rate: 60-70/hr DOE
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
System Integration/Test Engineer - Level 2

Description:
System Integration/Test Engineer - Level 2

Location: Archbald, PA
Duration: 5 month contract
Pay Rate: $27/hr - $32/hr (DOE)
Shift: First, 9/80
*Must be U.S. citizen and have the ability to obtain a Secret Clearance*


Job Description:
-Plans, implements, tests, documents, and maintains solutions for the integration and testing of in-house developed and COTS/GOTS components, elements, subsystems and/or systems.
-Synthesizes customer contractual needs and requirements into system test solutions that acknowledge technical, schedule and cost constraints.
-Establishes functional and technical specifications and standards, solves hardware/software interface problems, defines input/output parameters, and ensures integration of the entire system or subsystem.
-Reviews, evaluates and derives requirements for testability, develops and directs preparation and execution of comprehensive test plans, procedures and schedules for complete systems and/or subsystems.
-Coordinates subsystem and/or system testing activities with programs and other organizations.
-Performs analysis of test results and prepares comprehensive subsystem and/or system level evaluation reports which verify and validate system performance.
-Writes discrepancy reports and performs integration regression testing to verify/validate incorporated fixes to software, components, subsystems and systems.

Mandatory Skills:
-Test development
-Electronic Testing/Coding: 4-5 years

Desired Skills:
-Test fixture development
 
Job Number: 7091
Job Location: Archbald, PA
Rate: 27-32
Per Diem: Possible
Overtime: Yes
Duration: 5 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
System Integration/Test Engineer - Level 2

Description:
System Integration/Test Engineer - Level 2

Location: Archbald, PA
Rate: $40.00/HR
1 year contract
1st Shift

**MUST have an Active Secret Clearance**


Description
- Plans, implements, tests, documents, and maintains solutions for the integration and testing of in-house developed and COTS/GOTS components, elements, subsystems and/or systems.
- Synthesizes customer contractual needs and requirements into system test solutions that acknowledge technical, schedule and cost constraints.
- Establishes functional and technical specifications and standards, solves hardware/software interface problems, defines input/output parameters, and ensures integration of the entire system or subsystem.
- Reviews, evaluates and derives requirements for testability, develops and directs preparation and execution of comprehensive test plans, procedures and schedules for complete systems and/or subsystems.
- Coordinates subsystem and/or system testing activities with programs and other organizations.
- Performs analysis of test results and prepares comprehensive subsystem and/or system level evaluation reports which verify and validate system performance.
- Writes discrepancy reports and performs integration regression testing to verify/validate incorporated fixes to software, components, subsystems and systems.
- Clearance status is needed on resume.


Skill/Experience/Education
Mandatory:
- 4+ years of experience with Electronic Test Development – test design and documentation

Desired:
- Test fixture design/development
 
Job Number: 7213
Job Location: Archbald, PA
Rate: $40.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer/Support Analyst III - (MO)

Description:
US CITIZEN ONLY

SECRET-NOT REQUIRED TO START

This position will be located in St Louis, MO to support P-8A U.S. Navy and P-8 Australia program.
Selected candidate will support software delivery testing and device acceptance testing for Weapons Tactics Trainer (WTT), Part Task Trainer (PTT), Training System Support Center (TSSC), and Operational Flight Trainer (OFT) devices, as well as follow-on software upgrades to those devices.
Candidate will be asked to support test activities for P-8A U.S. Navy and P-8 Australia training devices to include software and hardware acceptance testing at facilities in St. Louis, MO; Jacksonville, FL; Whidbey Island, WA and Australia with potential for new customers and devices including India and UK.
Responsibilities include:
* Write Acceptance Test Plans and Procedures
* Support P-8 training systems customers by assisting in the test of hardware and software. Candidate will also assist in the development of training requirements.
* This position will include operation of the Weapon System Trainer (WST), Weapons Tactics Trainer (WTT), Part Task Trainer (PTT), and Scenario Generation Station (SGS), as well as the addition of new device types.
The successful candidate will:
* Review/edit subsystem and system level requirements and design.
* Create and status discrepancy reports for failed requirements.
* Analyze, review, and validate test data and acceptance test procedures.
* Prepare and publish user-level documentation, customer-based presentations, and tracking metrics.
* Listens and demonstrates understanding; clarifies meaning for others; speaks with clarity and precision; able to communicate with a diverse audience; writes clearly and concisely.
* Interface with other members of project or program teams, management, and technical staff to define and implement engineering solutions.
* Work under minimal direction.
Requirements ( must have to be qualified.)
This position must meet Export Control compliance requirements, therefore a “US Person” is required.
This position requires an active (or ability to obtain) U.S. Secret Security Clearance, for which the US Government requires US Citizenship. (Note: If you held a security clearance within the last two years, your clearance is considered current/active).
This position requires selected candidate to reside in the St Louis, MO area or be willing to relocate at own expense.
The candidate must have earned a positional type-rating in a US Navy Maritime Patrol airframe (P-3C or P-8A). For example Tactical Coordinator, Electronic Warfare Operator (EWO), Acoustic Operator.
. Assets (Preferred/ nice to have. Lacking does not disqualify)
Preferred candidates should have a minimum of a Technical bachelor's degree in one of the following fields: Computer Science, Aviation Management, Math, Computer Programming, Systems Engineering or Systems Integration.
Earned a positional type-rating in a US Navy Maritime Patrol airframe (P-3C or P-8A). For example Tactical Coordinator, Electronic Warfare Operator (EWO), Acoustic Operator.
Operational experience with deployed P-8A.
Operational MAC Acoustic experience.
P-8 training systems experience.
Experience using P-8A Aircrew Training Devices (such as WTT, PTT, OFT, MSDT, Electronic Classrooms (ECs).
P8/P3 Instructor Qualified.

Technical bachelor’s degree and typically 5 or more years’ related work experience or a Master’s degree with typically 3 or more years’ or a PhD degree or an equivalent combination of education and experience. A technical degree is defined as any four year degree, or greater, in a mathematic, scientific or information technology field of study.
 
Job Number: 25616-1
Job Location: Hazelwood, MO
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 9-12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tax Accountants - Greensboro, NC

Description:
STS AeroStaff Services is currently hiring Tax Accountants for open positions in Greensboro, North Carolina.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

The Tax Accountant is responsible for the filing of state, local, and Canadian sales and use tax returns, and various other statutory filing as required by Federal, state and local and Canadian jurisdictions in order to comply with tax laws. The Tax Accountant is responsible for sales/use tax compliance as it applies to all invoicing and purchases. This is accomplished by “frequent personal review” and application of the tax law as it pertains to each transaction, implementing changes to system setup as required. The Tax Accountant is also responsible for property tax filings, annual report filings, grant disbursement request filings, and miscellaneous business licenses filings. The Tax Accountant may be asked to assist with various tax projects.

Job Duties:

• Preparation/filing of approximately 30 sales and use tax returns, including reconciliation of GL tax accounts on a monthly basis
• Filing in approximately 25 US states and Canada
• Preparation and filing of multi-state unclaimed property reports, business license renewals, sales and use tax license renewals, and various other returns and workpapers as required
• Prepare/execute Tax Department monthly Journal entries as required
• Track Canadian GST/HST payments to assure we are capturing all for use as tax credits (ITCs) on GST/HST tax returns
• Analyze all sales and use tax issues, including researching systems, communicating with customers, identifying and implementation of solutions
• Maintain large electronic file of customer resale/exemption certificates
• Responsible for issuing tax credits/debits as required
• Research and make taxability determinations for all products/services both sold and purchased by client
• Continual research of all states is required
• Review capitol appropriations to determine taxability
• Review/adjust, as necessary (via journal entry), all purchases for overpayments/over-accruals on a monthly basis
• Maintain/control taxability of all purchases passing thru our automated purchasing systems thru the use of Vertex tables
• Maintenance and reporting of, abandoned property records
• Includes account reconciliation and retaining hard copy files for reporting purposes
• Implementation, maintenance and utilization of Vertex sales and use tax system, including updating software, integrating with existing accounting systems, computer table maintenance, and training on system use
• Client is currently in the process of implementing Vertex O Series
• Timely preparation and filing of property tax returns
• Analyze fixed asset and financial data as it relates to the property tax function
• Prepare written correspondence to various tax jurisdictions in response to their notices/inquiries
• Facilitate and lead state sales/use and property tax audits, including assisting with other audits as necessary
• Create and manage efficiencies in all work areas
• Maintenance of the tax calendar as it relates to assigned tasks
• Prepare annual grant disbursement request filings
• Monitor nexus footprint to ensure new filings are made as needed for sales and use tax, property tax, business licenses, annual reports, etc., as the business expands

Education, Work Experience, Certification and/or Licensure:

• Bachelors’ degree in Accounting required; Comparable years of experience in lieu of degree may be considered
• 5+ years’ of experience in a corporate setting dealing with multi-state sales and use tax

Knowledge, Skills, & Abilities:

• Excellent at calculating and analyzing complex figures and numbers
• Effective writing, oral and interpersonal communication skills
• Must be able to explain complex terms and facts clearly and logically
• Strong detail orientation skills
• Proficient in Vertex sales and use tax software
• Proficient in Microsoft Office
• Ability to research tax compliance issues
• Highly motivated with ability to work in a team environment
• Excellent presentation skills with professionalism

Physical Requirements:

• Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors
• Incumbents may be required to stand, sit, squat, walk, bend, climb ladders, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties
• Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.)
• Read, hear, speak, and see with no restrictions, as required by job duties
• Comprehend and adhere to management directions and/or safety instructions with no restrictions
• Effectively communicate in Business English language
• Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties
• Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 38711
Job Location: Greensboro, NC
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Designer I

Description:
Technical Designer I

Location: Savannah, GA
Rate: $23.00 - $25.00/HR
Long Term contract


Unique Skills:
- Working knowledge of 3D printing is desired. Hand-on experience designing build trays for and operating 3D printers is strongly preferred.
- Working knowledge of Microsoft SharePoint is desired.
- SharePoint page design experience is strongly preferred.
- Proficiency in Microsoft Office products (Word, Excel, PowerPoint) preferred.

Education and Experience Requirements:
Associates degree in drafting, design, engineering, manufacturing technology, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Two (2) years related experience. Familiarity with computer-aided design systems and basic personal computing. Basic knowledge of engineering, engineering procedures and design drawing standards.

Position Purpose:
Under direct supervision, performs a variety of basic engineering tasks in a specialized area, receiving instruction as to the tasks required and the expected results. Prepares and maintains electronic datasets for engineering drawings with the assistance and direction of more experienced engineering personnel.

Principal Duties and Responsibilities:
Essential Functions: 1. Applies knowledge of common design and drafting principles, guidelines, specifications and standards to create basic electronic layouts, sketches, models, and drawings. 2. Obtains form, fit and functional data and verification from engineers or senior designers. 3. Coordinates drawing requirements and release with engineers and senior engineers. 4. Reconciles and integrates the input of engineers. 5. Develops and recommends alternatives to simplify and clarify design intent. 6. Incorporates information from sketches, notes, layouts and markups to produce graphic representations of designs using computer-aided design tools (Mentor Graphics, Oracle, Cadam, Catia, etc.). 7. Reviews work for accuracy and completeness prior to drawing check. 8. Follows established procedures to produce and revise electronic datasets.

Additional Functions: 1. Takes on special projects as assigned. 2. Performs other duties as assigned.

Other Requirements: 1. Good analytical, interpersonal, communication and visualization skills. 2. Ability to work both independently and in a team environment.
 
Job Number: 7226
Job Location: Savannah, GA
Rate: 23.00-25.00/Hr
Per Diem: Possible Split
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Engineer

Description:
Test Engineer

Location: Owego, NY
Pay Rate: $25/hr - $29.80/hr (DOE)
Duration: 1 Year Contract
Schedule: 9/80
Secret Clearance: (Prime Contract: Can start w/o clearance: Yes; Interim Clearance Sufficient: Yes)
*Must be a U.S. Citizen*

**This is primarily a first shift position. However, any candidate submitted should on occasion and driven by business needs plan for working an off shift or alternate schedule which could contain 2nd or 3rd shift hours and/or weekend work**

Job Description:
Specific duties will include:
-test procedure development;
-test planning and preparation;
-test procedure execution;
-coordinate system resources to support testing;
-support test development, integration, and anomaly resolution as required;
-support off-hours testing and associated projects as needed.
-This role requires knowledge/experience with electronic circuits, automated test software, manufacturing processes, and the manufacturing test environment.
-Additionally, the ability to interpret test requirements, implement requirement based test methodologies, and utilize statistical data analysis is required.
-Personal characteristics must include flexibility, adaptability, a self-starter requiring minimal direct supervision, able to work both individually and as part of a team, and able to interact and work well with Company employees and internal customers
-An eye test is required and is a condition of this offer

Mandatory Skills:
Experience with:
-test procedure development;
-test planning and preparation;
-test procedure execution;
** This role requires knowledge/experience with electronic circuits, automated test software, manufacturing processes, and the manufacturing test environment. **
-the ability to interpret test requirements, implement requirement based test methodologies, and utilize statistical data analysis is required.
-Must also accept the schedule which on occasion includes off-shift (afternoon, nights, and weekends) scheduling to meet business needs.

Education:
Bachelors degree from an accredited college in a related discipline, or equivalent experience/combined education, with 2 years of professional experience; or no experience required with a related Masters degree. Considered experienced, but still a learner.
 
Job Number: 6885
Job Location: Owego, NY
Rate: 25.00 - 29.80
Per Diem: Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Back to Advanced Job Search