Job Search Results

592 listings were found that matched your search words: Keywords: Aircraft ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2019/08/20 Tuesday 10:04PM Pacific Time by ContractJobHunter. )

Listings 1 - 592

Go To My Job Tracker

Expand all descriptions

2 Aircraft Stress Engineers - Composites

Description:
Aircraft composite stress engineering contractors needed.
MUST BE US PERSONS.
Ability to work in a fast paced environment.
MUST have a good Composites Primary Airframe Structures background.
FAR 23 experience is a huge plus.
Classical hand analysis, Nastran, FEMAP a plus
US PERSONS REQUIRED

Position Responsibilities
This is a Senior Level Contract Stress Analyst position.
General Minimum Requirements:
• Education: MS with 8+ years, or BS with 1O+ years of relevant experience
• Create engineering criteria and analysis methods to ensure that the work meets all program requirements (e.g., airworthiness, customer requirements, internal methods and processes, etc.).
• Actively develop and evaluate plans for activities and soundness of proposed methods and analysis to meet the program schedules and airworthiness standards.
• Select appropriate material systems for structures applications and identify all material testing requirements.
• Identify and communicate technical risks to the relevant stake holders through program status reports in a timely manner.
• Review all program critical documents such as stress reports, manufacturing plans and procedures, and structural test plans in a timely manner to ensure compliance with design and loads requirements.
• Resolve complex engineering issues in creative and effective ways as to balance technical product, cost, and schedule.

Must be a US Citizen, or Greencard holder.

THE STRUCTURES COMPANY IS AN AA/EOE
 
Job Location: Manassas, VA
Rate: $75-85/hr DOE
Per Diem: Yes
Overtime: Possible
Duration: Long-term
Start Date: ASAP
Input Date: 04/02/2019
Last Updated: 08/20/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: chrissheets@thestructurescompany.com
Website: www.thestructurescompany.com

2 Aircraft Stress Engineers with Composites

Description:
2 Aircraft Composite Stress Engineers Needed.
Require 10+ years of aircraft/aerospace stress analysis with a good composites background.
Previous FEMAP experience is a plus.
Composite airframe analysis experience a MUST.
MUST be US Persons

Qualifications:
-Experience in aircraft or spacecraft composite, design and analysis processes
-Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures
-Minimum 10 years or more of applicable experience in the analysis of structural systems using strength of materials and finite element based methods
-Experience with free-body diagrams and classical stress analysis techniques
-Experience with FEMAP
-Rapid prototyping experience a strong plus
-Excellent computer skills, including Outlook, Word, Excel and PowerPoint
-Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
-Applicants must be U.S. persons as defined by ITAR
Educational Requirements-
Bachelors degree from an accredited institution, with a concentration in a relevant Engineering discipline

The Structures Company is an AA/EOE.
 
Job Location: Mojave, CA
Rate: $80-85/hr
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 06/25/2019
Last Updated: 08/20/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: chrissheets@thestructurescompany.com
Website: www.thestructurescompany.com

2 Stress Analyst Engineers

Description:
OPEN TO A CONTRACTOR THAT IS ONLY INTERESTED IN CONTRACT, BUT CONTRACT TO HIRE IS PREFERRED.

IF INTERESTED IN CONTRACT TO HIRE, PERSON NEEDS TO BE COMMITTED TO CONVERTING TO DIRECT RULES WITHIN THREE MONTHS.

Seeking a first-rate aerospace Composite Stress Analysis Engineers with experience in vehicle stress analysis, repairs, and production manufacturing. The composite stress analyst will compile analysis, reports, models, and margins of safety into standardized formats for upload into TSC's product lifecycle manager. Additionally, the analyst will support the design engineering staff with drawing release. The stress analyst is ultimately responsible for ensuring the vehicle structural design meets the customer mission requirements with positive margins of safety.


Responsibilities:
• Reviews, updates, and compiles engineering analytical definition of structural components and assemblies based on records from the prototype build project
• Develops standardized analysis criteria and templates
• Plays an integral role in the work flow release process for all structural designs
• Supports review of manufacturing plans and procedures to ensure compliance with design and loads requirements
• Supports the creation of structural test plans which will be used to verify manufacturing

Basic Qualifications
• Bachelor's degree from an accredited institution, with a concentration in a relevant Engineering discipline
• Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures
• Minimum 3 years or more of applicable experience in the analysis of structural systems using strength of materials and finite element based methods
• Experience with free-body diagrams and classical stress analysis techniques
• Excellent verbal and written communication skills
• Excellent organizational and problem-solving skills
• Excellent computer skills, including Outlook, Word, Excel and PowerPoint
• Applicants must be 'U.S. Citizen' as defined by the ITAR (22 CFR §120.15)

Preferred Skills and Experience
• Hands-on experience with composites part fabrication and assembly processes and proficiency in FEMAP a plus
• Pilot, aircraft homebuilding and rapid prototyping experience a strong plus
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
• Experience with manufacturing-based ERP systems, such as Oracle, is a plus




The Structures Company is an AA/EOE.
 
Job Number: 71
Job Location: Mojave, CA
Rate: Up to $85/Hr. ***DOE***
Per Diem: Yes
Overtime: Yes
Duration: 9+ Month
Start Date: ASAP
Input Date: 07/18/2019
Last Updated: 08/20/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

2 Stress Engineer Openings - Composites - Contract-to-Hire

Description:
We have a need for 2 Aircraft Composite Stress Engineers that are open to a contract-to-hire scenario. MUST be US Citizens.
Require 10+ years of aircraft/aerospace stress analysis with a good composites background.
Previous FEMAP experience is a plus.
Composite airframe analysis experience a MUST.
MUST be US Citizens

Qualifications:
-Experience in aircraft or spacecraft composite, design and analysis processes
-Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures
-Minimum 10 years or more of applicable experience in the analysis of structural systems using strength of materials and finite element based methods
-Experience with free-body diagrams and classical stress analysis techniques
-Experience with FEMAP
-Rapid prototyping experience a strong plus
-Excellent computer skills, including Outlook, Word, Excel and PowerPoint
-Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
-Applicants must be U.S. Citizens
Educational Requirements-
Bachelors degree from an accredited institution, with a concentration in a relevant Engineering discipline

The Structures Company is an AA/EOE.
 
Job Location: Mojave, CA
Rate: Open
Per Diem: Yes
Overtime: Yes
Duration: Contract-to-hire
Start Date: ASAP
Input Date: 07/18/2019
Last Updated: 08/20/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: chrissheets@thestructurescompany.com
Website: www.thestructurescompany.com

2560 - AVIONICS SYSTEMS ENGINEER - cv, word doc only

Description:
Interfacing with customers (both internal and external) during definition and implementation of avionic system integration.

Execute program milestones according to established schedule and ensure critical path and key dependencies are effectively managed to achieve successful outcome.

Reviewing detailed execution plans and schedules with the project management team to ensure adequacy, completeness, and harmonization with the overall program level plan.

Generating system requirements documents for physical and logical interfaces.

Defining cockpit display formats and control operation in conjunction with the customer.

Developing and running functional test procedures for all avionics sub-systems.

Advising the customer on the physical installation of avionics equipment.

Troubleshooting and diagnosing avionics problems on the systems integration rig and flight test aircraft (may involve travel)

Documenting, tracking, and resolving avionics problems resulting from both design errors and equipment failures.

Generating certification documents for subsystems demonstrating compliance with OEM certification plans.

Supporting Change Management related activities at the program level.

Bachelor's Degree in applicable engineering or science field, and ten years of related experience, or, in the absence of a bachelor's degree, sixteen years of related experience.

Detailed systems knowledge is required in at least five of the following systems: AFCS, Air Data, Cockpit Audio, Cockpit Printers, Datalink, EFIS, EICAS, Enhanced Vision Systems, FANS, FMS, GPS, Graphical Datalink Weather, HUD, Integrated Modular Avionics (IMA), On-board Maintenance Systems, Radio Altimeters, Synthetic Vision Systems, TAWS, TCAS/Transponders, VHF Comm, VHF Nav, XM Weather.

Analysis - thinking through a logical, in-depth analysis of a problem or situation.

Cooperation - Serves as a role model to his or her coworkers by demonstrating respect and sensitivity for fellow workers and promoting open discussion of issues.

Coordinating - Provides a seamless stream of communication and support.

Customer Service Orientation - Fully comprehends the value of the organization's customers and champions strategies to ensure world-class service.

Dependability - Consistently produces exemplary results that can be used as prototypes for future projects.

Judgment - Able to quickly assess the costs, benefits, and risks of a decision while using sound logic to ultimately make well-informed decisions.
 
Job Number: 2560
Job Location: Toronto, Canada
Rate: 85.00
Per Diem: No
Overtime: 1.5
Duration: Long Term
Start Date: ASAP
Input Date: 07/05/2019
Last Updated: 08/08/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2566 - STRUCTURAL DESIGNER - cv, word doc only

Description:
Closely interface with technology, stress, systems, manufacturing, test groups and structural suppliers;

Produce change documentation;

Support directly other engineering and operations departments;

Support design and program reviews with partner/suppliers;

Produce status for project and assurance that engineering deliverables, meeting quality requirements, are provided as per schedule.

Have Bachelor Degree in Engineering mechanical/aerospace engineering plus a minimum of 10 years relevant experience in aerospace or related industry,

Possess a strong knowledge of aircraft structures and systems installation, configuration management principles, design for manufacturing, detail design (sheet metal, machined parts, piping, and component assembly), weight control, drafting procedures and standards, costs and schedule.

Have knowledge of CATIA/ENOVIA V5 and MS Office is required.

Are an energetic person with excellent communication and interpersonal skills that will allow the candidate to meet desired results in a high-pressure working environment.

Have a high sense of commitment, willingness to accept responsibilities and act independently and the ability to collaborate with partners and suppliers are assets.

Are fluent in French and English (written and spoken), an asset
 
Job Number: 2566
Job Location: Mirabel, QC, Canada
Rate: 53.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 07/05/2019
Last Updated: 07/05/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

2567 - DYNAMICS ENGINEER - cv, word doc

Description:
Responsible for constructing dynamic models that represent the behavior of landing gears in order to evaluate the operating loads and its stability.

Evaluate and analyze the rigidity, viscosity, mass distribution and friction parameters of our landing gear parts and systems.

Your expertise will be essential to determine the maximum loads according to various flight parameters and aircraft configurations, as well as ground loads.

Have to make sure that our landing gears are not subject to shimmy.

Bachelor's degree in mechanics, mechatronics, aeronautics

Mathematical mind and ability to perform advanced calculations

5 years of experience in kinematic and dynamic analysis of mechanisms using the MSC.ADAMS software

Familiar with hydraulic systems

Ability to solve complex technical problems

Matlab / Simulink environment expertise.

French and English fluency
 
Job Number: 2567
Job Location: Montreal, Canada
Rate: 90.00 US
Per Diem: TBD
Duration: Long Term
Start Date: ASAP
Input Date: 08/08/2019
Last Updated: 08/08/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

A&P Mechanic

Description:
The ideal candidates will perform Depot, Intermediate, and Organizational repairs, upgrades and Modifications to Aircraft product lines and their components. 

Duties to include:

  • Component overhaul and repair
  • Crash damage repair
  • Aircraft and component teardown and evaluation
  • Incorporating ECP's
  • Technical directives, ASAM's ASB's and CSN's
  • Validating and verifying retrofit kit upgrades
  • Administering training to customers

 Must be experienced in:

  • Must have 7-10 years of experience on UH-60 aircraft and an A&P license.
  • Maintenance of flight control systems
  • Fuel
  • Drivetrain
  • Rotor Systems
  • Blueprint Reading and Interpretation

Under a minimal of supervision be able to perform a variety of moderately complex tasks. 
 
 
Job Number: 1810092570
Job Location: Huntsville, AL
Duration: 18 months
Input Date: 05/15/2019
Last Updated: 08/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Sherrita Davis
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002f3lsAAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Mechanics

Description:
STS Technical Services is Hiring A&P Mechanics in Alcoa, Tennessee!
Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-800-359-4787.
Job Summary:
Airframe & Powerplant technicians are certified and licensed by the Federal Aviation Administration to perform maintenance, scheduled and unscheduled on airframes and engines on aircraft registered in the United States of America
Job Duties:
Examine replacement aircraft parts for defects
Diagnose mechanical or electrical problems
Read and understand maintenance manuals and other technical documents and identify repair procedures
Repair wings, brakes, electrical systems and other aircraft components
Replace defective parts using approved tooling
Test aircraft parts with proper diagnostic equipment
Inspect complete work for compliance and performance standards
Review and research aircraft records
Interpret flight test data to diagnose malfunction and performance problems
Assemble aircraft components, perform required measurement and testing
Install system software and databases
Qualifications:
Possess FAA Airframe, Power plant. or airframe and Power plant Certificate or equivalent work experience (Repairman Certificate eligible)
2 years’ experience on General aviation or Corporate aircraft required.
Cirrus SR2X Experience/Factory Training a plus
Aircraft paint and refinishing experience a plus
Knowledge of Federal Aviation Administration Regulations
FAA Airframe, Power Plant or Airframe and Power Plant Certificate
Benefits:
At STS Technical Services we offer a comprehensive benefits package to all employees, and candidates of every background are encouraged to apply.
If you have questions about pay rates, benefits, etc… please contact us at 1-800-359-4787.
Thanks so much, and we look forward to hearing from you soon!
 
Job Number: 44185
Job Location: Alcoa, TN
Input Date: 07/11/2019
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Mechanics

Description:
STS Technical Services is Hiring A&P Mechanics in El Paso, Texas.
A&P Mechanic Responsibilities:
Perform required maintenance on company aircraft.Ensure all tasks assigned are completed in accordance with manufacturer’s manuals and FAA accepted or approved data
Adheres to all applicable FARs and Company policies and procedures outlined in the General Procedures Manual (GPM) and the Company’s, FAA Approved Continuous Airworthiness Maintenance Program
Interpret aircraft technical manuals, and electrical drawings
Responsible for movement of aircraft in hangar and on ramp, including operation of tow-tractor
Maintain work area in a neat, clean and safe condition at all times
Perform only those tasks for which proper training and qualification has been obtained
Document On-the-job training (OJT) on from (T#004) for training received on tasks which Mechanic/Repairmen has not previously performed
Perform other duties as assigned
Qualifications:
Need A&Ps with minimum of 2 years experience and/or any Regional GenFam training
Must have at least 2 years of CRJ 900 experience (If you have CRJ GenFam, the experience requirement may be waived).
Hold a Mechanic’s Certificate with Airframe and Powerplant ratings.
Meet requirements of 14 CFR Part 65.83
Familiar with parameters and standards established specifically in Federal Aviation Regulations, Parts 53, 65 and 91
Familiar with basic inventory management functions
Strong interpersonal skills and ability to work harmoniously with others
Familiar with computer data entry, and Microsoft Windows based programs
Capable of lifting 75 lbs
Able to work flexible schedule to include day and night shifts
Willing to travel as needed
About STS Technical Services:
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.
Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!
If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.
STS Technical Services is an equal opportunity employer.
 
Job Number: 46835
Job Location: El Paso, TX
Input Date: 07/11/2019
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Mechanics

Description:
STS Technical Services is hiring A&P Mechanics in Conroe, Texas.
Job Overview:
A&P Mechanics will be providing heavy maintenance on Hawker, Lear, King Air and smaller piston aircraft so experience with each is preferred but not required.
Qualifications:
A&P mechanic with a minimum of 3 years’ experience performing MRO or line maintenance in a GA or Corporate, military or regional environment.
About STS Technical Services:
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.
Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!
If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.
STS Technical Services is an equal opportunity employer
 
Job Number: 48195
Job Location: Conroe, TX
Input Date: 07/11/2019
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Mechanics

Description:
STS Technical Services is Hiring A&P Mechanic in Macon, Georgia!
We are a premiere staffing agency providing high-paying contract and direct-hire employment opportunities. We’d love to partner with you to help you take your career to new heights. Check out the following information about this incredible employment opportunity we have right now with a great client of ours.
Job Duties:
Will be working a Wi-Fi project, as well as other projects and heavy checks as they come in
Qualifications:
At least 3+ years’ experience on Regional or Commercial aircraft in an MRO setting
An A&P License is required
Open to Military candidates; however, any military candidates should have phase maintenance and depot level experience
Also open to candidates with Line Maintenance experience, but only if it is mixed with MRO experience
About STS Technical Services:
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.
Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!
If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.
STS Technical Services is an equal opportunity employer.
 
Job Number: 44470
Job Location: Macon, Georiga
Input Date: 07/11/2019
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

APG Mechanic URGENT URGENT / no clearance / 3 years’ experience of C-130 Flight Line experience required SC

Description:
164387
Job Title: APG Mechanic

Work Site Address: Greenville, SC 29605
Max Pay Rate: 25-29/hr DOE
Start Date: ASAP
End Date: 9 months
Position Type: Contract
1 more opening

Job Summary:
Inspects, troubleshoots, repairs, overhauls and modifies aircraft systems and powerplants in accordance with established written procedures, specifications, and standards. Candidate must be knowledgeable in aircraft systems operation and maintenance to include landing gear, powerplants, flight controls, disassembly, reassembly, rigging and aircraft movement.

Must be able to read and speak English. Comprehend documents such as safety rules, operating maintenance instructions and procedure manuals.

Mission essential functions and other duties may be assigned as required.

Qualifications and Education Requirements
• Candidate must possess at minimum, 3 years of C-130 Flight Line Experience
• Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company

In order to perform the essential functions of this job, the employee is regularly required to perform repetitive movements, work overhead, use hands to grasp, handle, and/or feel, reach with hands and arms. The employee is frequently required to stand, walk, stoop, kneel, squat, crawl, twist, and work on or in the aircraft. The employee is occasionally required to sit, climb, and balance. The employee must frequently lift and/or push or pull up to 25 pounds and occasionally lift and/or push or pull up to 50 pounds. Specific vision abilities required by this job include close vision, peripheral vision, depth perception and ability to adjust focus. While performing the essential functions of this job, the employee will be required to wear Personal Protective Equipment (PPE) as needed to perform job tasks. The employee is regularly exposed to vibration. The candidate will be frequently exposed to moving mechanical parts, fumes or airborne particles. The candidate must be able to properly use, handle and dispose of hazardous materials, and toxic or caustic chemicals per Government regulations and company procedures. The employee is occasionally exposed to wet and/or humid conditions, high, precarious places, and outside weather conditions. The candidate is required to work in a safe and efficient manner while maintaining a clean, FOD-free work area.

Preferred Skills
FAA Airframe and/or Powerplant License a Plus!
 
Job Number: JE-1656-1
Job Location: Greenville, SC
Rate: 25-29/hr DOE
Per Diem: no
Duration: 9 months
Input Date: 07/17/2019
Last Updated: 08/20/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

APG Mechanic / 2nd shift / 3 years of P-3 Orion required / Flight Line experience required URGENT SC

Description:
164387 Job Title: APG Mechanic

Work Site Address: Greenville, SC 29605
Job Number: 1662-1

Start Date: 7/8/2019
End Date: 12/20/2019
Position Type: Contract

Job Summary:
Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company.
Inspects, troubleshoots, repairs, overhauls and modifies P-3 Orion aircraft systems and power plants in accordance with established written procedures, specifications, and standards. Candidate must be knowledgeable in aircraft systems operation and maintenance to include landing gear, power plants, flight controls, disassembly, reassembly, rigging and aircraft movement.
Must be able to read and speak English. Comprehend documents such as safety rules, operating maintenance instructions and procedure manuals.
Mission essential functions and other duties may be assigned as required.

Qualifications and Education Requirements
Candidate must possess at minimum, 3 years of P3 Orion MMRO or Flight Line Experience



Qty 1 position needed
This position is the 2nd Shift 1530-0130
 
Job Number: JE-1662-1
Job Location: Greenville, SC
Rate: DOE
Duration: 6 months +
Start Date: 2nd Shift - 3:30pm-1:00am
Input Date: 07/31/2019
Last Updated: 08/20/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Aerodynamics Design Engineer

Description:
Chipton-Ross is seeking an Aerodynamics Design Engineer for an opening in Reno, NV.

RESPONSIBILITIES:
The Aerodynamics Design Engineer will be responsible for the aerodynamic design of the Client supersonic business jet to meet program and certification requirements. Successful candidates will have a commanding and fundamental understanding of the design and development of fighter and/or business jet class aircraft, preferably with experience developing supersonic vehicles. Candidates should have expert level knowledge of the necessary physics based trades for supersonic designs and the regulatory requirements that apply to such aircraft. The ideal candidate will have demonstrated knowledge and experience in computational fluid dynamics, analytical and theoretical performance estimation techniques, wind tunnel testing from low speed to high speed regimes (preferably supersonic), propulsion integration (preferably supersonic), and stability and control.
Perform detailed aerodynamic design and analysis in areas of aircraft shape, configuration, performance, and handling qualities.
Optimize and tune aircraft shape using CFD and other commercial or in-house advanced modeling tools including geometry modeling.
Predict aircraft aerodynamic performance using classical analytical techniques as well as advanced simulation tools.
Provide guidance in the design of airframe and control surface. components which meet design and certification requirements
Provide support to the various Systems and Structures IPTs in support of their development and certification.
Assist in the development of advanced aerodynamic analysis tools.
Provide subject-matter expert level guidance on both practical and theoretical aerodynamic aircraft design.
Provide support for engineering, certification, and flight test departments from concept to product certification.

REQUIRED EXPERIENCE:
Minimum of five years overall technical experience in aerodynamics, CFD and aerodynamic design of air vehicles.
Familiarity with computational geometry and 3D geometry modeling.
Significant experience in aerodynamic design, from concept through certification, in a collaborative multi-discipline team environment.
Experience in the development of fighter, supersonic, and/or business aircraft. Experience with advance design tools such as MDO frameworks.
Familiarity with HPC platforms and NASA CFD codes.
Advanced skills in computational geometry and familiarity with Dassault Systmes CATIA software suite.
Strong technical, interpersonal, communication, administrative, and presentation skills.
Demonstrated leadership in solving technical challenges.

EDUCATION:
Accredited Bachelor's degree Mechanical or Aerospace engineering, or similarly related field, with an advanced degree in a highly relevant technical specialty strongly preferred.

WORK HOURS:
Full-Time

 
Job Number: 177351
Job Location: Reno, NV
Rate: $DOE
Duration: Direct
Input Date: 03/01/2019
Last Updated: 08/20/2019
Firm Name: CHIPTON ROSS
Attention: Kevin Suk
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: ksuk@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerodynamics Engineer

Description:
• Perform detailed aerodynamic analysis in areas of aircraft aerodynamic forces, performance, external loads, and handling qualities
• Predict aircraft performance and handling characteristics using classical analytical techniques as well as advanced simulation tools
• Provide guidance in design modifications to the airframe or airframe elements to improve aerodynamic performance
• Generate aerodynamic performance, stability and control and loads databases
• Assist in the development of advanced aerodynamic analysis tools
• Provide support for engineering, certification, and flight test departments from concept to product certification

Basic Qualifications:
• Zero to five years overall technical experience in computational fluid dynamics of external and/or internal flows.
• BS degree or higher in mechanical/aerospace engineering.
Strong technical, interpersonal, communication, administrative, and presentation skills.

Desired qualifications:
• MS or PhD degree in a technical specialty involving computational fluid dynamics.
• Significant experience with CFD including validation of results. History of working in a collaborative multi-discipline team environment. Experience in the development of fighter, supersonic, and/or business aircraft. Familiarity with HPC platforms and NASA CFD codes such as Overflow and Fun3D.
 
Job Number: 42-015
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: Possible
Duration: 1 year+
Start Date: ASAP
Input Date: 07/09/2019
Last Updated: 07/22/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

Aerodynamics Propulsion Integration Engineer

Description:
Chipton-Ross is seeking an Aerodynamics Propulsion Integration Engineer for an opening in Reno, NV.

RESPONSIBILITIES:
The Aerodynamics Propulsion Integration Engineer will be responsible for supporting the aerodynamic design of the inlet and exhaust systems of the Client supersonic business jet to meet program and certification requirements. Successful candidates will have a commanding and fundamental understanding of the design and development of propulsion integration, preferably with experience developing supersonic inlets. Candidates should have expert level knowledge of the necessary physics-based trades for supersonic designs. The successful candidate will have demonstrated knowledge and experience in computational fluid dynamics, analytical and theoretical performance estimation techniques, and, ideally, wind tunnel testing from low speed to high speed regimes.
Perform detailed aerodynamic design and analysis in areas of aircraft inlet shape, performance, and integration.
Design and optimize inlet aerodynamic loft using CFD and other advanced design, optimization and modeling tools.
Perform detailed aerodynamic design and analysis in areas of aircraft nozzle shape, performance, and integration.
Design and optimize inlets and nozzles as integrated elements of the aircraft using CFD and other advanced design, optimization and modeling tools.
Provide support to the various Systems and Structures IPTs in support of their development and certification.
Assist in the development of advanced aerodynamic analysis tools by providing feedback and developing requirements.
Provide support for engineering development tests, certification, and flight testing from concept to product certification.
Interact with engine supplier to help manage and meet inlet requirements and nozzle performance.

REQUIRED EXPERIENCE:
Minimum of five years of technical experience in one of the specific flight sciences areas of aircraft design, with specific and/or strong general knowledge of the other areas.
Experience in air vehicle aerodynamic design in a collaborative multi-discipline team environment.
Familiarity with HPC platforms and CFD codes
Experience with advance design tools such as MDO frameworks, as well as programming (Java, C, Fortran) and scripting (Python, Bash).
Strong technical, interpersonal, communication, administrative, and presentation skills.
Demonstrated leadership in solving technical challenges.
Experience in the development supersonic and/or business aircraft strongly desired.
Experience in aerodynamic design of inlets and/or nozzles, especially for supersonic aircraft. Experience with Overflow, Fun3D, Pointwise and Tecplot CFD tools.
Experience with CATIA.

EDUCATION:
Accredited Bachelor's degree in Mechanical or Aerospace engineering, or similarly related field, with a relevant advanced degree strongly preferred.

WORK HOURS:
Full-Time

 
Job Number: 177352
Job Location: Reno, NV
Rate: $DOE
Duration: Direct
Input Date: 02/21/2019
Last Updated: 08/20/2019
Firm Name: CHIPTON ROSS
Attention: Brenda Ordaz
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bordaz@chiptonross.com
Website: www.chiptonross.com

Aerodynamics Test Engineer

Description:
Chipton-Ross is seeking an Aerodynamics Test Engineer for an opening in Reno, NV.

The Aerodynamics Test Engineer will be responsible for supporting the aerodynamic design of the Client supersonic business jet to meet program and certification requirements. Successful candidates will have a commanding and fundamental understanding of the design and development of fighter and/or business jet class aircraft, preferably with experience developing supersonic vehicles. Candidates should have expert level knowledge of the necessary physics-based trades for supersonic designs and the regulatory requirements that apply to such aircraft. The ideal candidate will have demonstrated knowledge and experience wind tunnel testing from low speed to high speed regimes (preferably supersonic), propulsion integration test (preferably supersonic), aerodynamics loads and stability and control.

RESPONSIBILITIES:
Perform wind tunnel test planning/execution/reporting.
Wind Tunnel coordination, Wind Tunnel Model manufacturing oversight, incorporation of required algorithms into Wind Tunnel facility, Wind Tunnel Test Execution, and subsequent analysis of Wind Tunnel data supporting test activities.
Support the development of instrumentation requirements and data analysis to successfully meet the wind tunnel test objectives.
Provide guidance during test campaigns to improve and assess aerodynamic performance.
Perform detailed aerodynamic analysis in areas of aircraft aerodynamic forces, performance, external loads, and handling qualities.
Provide support for engineering, certification, and flight test departments from concept to product certification

REQUIRED EXPERIENCE:
1-5 years experience with aircraft design or performance analysis using computational tools such as vortex-lattice and area rule methods as well as traditional handbook methods. .
Experience in the development of fighter, supersonic, and/or business aircraft.
Familiarity with testing of propulsion systems for supersonic aircraft.
History of working in a collaborative multi-discipline team environment.
Strong technical, interpersonal, communication, administrative, and presentation skills.
Highly self-motivated with a strong bias for action, and excellent problem-solving skills across multi-disciplinary skill sets.

EDUCATION:
Accredited Bachelor's degree Mechanical or Aerospace engineering, with an advanced degree in a technical specialty relating to aircraft design and performance highly preferred.

WORK HOURS:
Full-Time
 
Job Number: 177353
Job Location: Reno, NV
Rate: $DOE
Duration: Direct
Input Date: 02/22/2019
Last Updated: 08/20/2019
Firm Name: CHIPTON ROSS
Attention: Terry Jones
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: tjones@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
Aeronautical Engineer

Location: Greenville, SC

6 month contract

Bachelor of Science Degree in Mechanical or Aeronautical Engineering field is required.

Minimum of 6 years’ experience with aircraft design, assembly, production or repair is required.

Aeronautical Engineer required to assist with the Material Review Board (MRB) to support detail fabrication, sub-assembly, component assembly, and mate through delivery operations. 

Primary duties of this assignment include technical solution development and coordination, and preparation and release of dispositions related to discrepancies on high performance aircraft detail parts, assemblies, installations and finishes.

Support Planning reviews for F-16 Production through all phases of the F-16 Production. 

Engineering candidate will be required to coordinate across many Greenville Operations Functional areas and other client sites, including Stress/DADT, Quality Assurance, Planning, Functional Test, Structures and Systems Design groups, Safety, Materials and Processes and Flight Sciences. Chosen candidate will work closely with the production floor, support process improvements, incorporate best practices into daily operations, and coordinate lessons learned and corrective action. Must possess experience with making timely decisions and possess the ability to understand and manage financial impacts created by specific decisions.


____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 57166
Job Location: Greenville, SC
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6 months
Start Date: ASAP
Input Date: 07/05/2019
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

Aeronautical Engineer

Description:
Location: Fort Worth, TX
Rate: $71.14/HR
Duration: 10 month contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****

Job Description:
- Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design.
- Verify the aero source tool will support shop floor, flight line, and off-site aircraft build and operations.
- Will support validation that aero source will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations.
- Will work production floor support from receipt of problem, coordination of answer to release of engineering change.
- Design, develop, and test a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight.
- Establishes structural specifications, performs stress analysis, and conducts performance tests.

Education / Experience:
- Level 4: BS+16 YRS or MS+14 YRS
- Prior F-16 design experience is desired but, not required.
- Past work experience using CATIA V4 and F-16 EBOM system (MPRSII) is highly desired.
- Design experience sought after covers systems installation and equipment installation however, airframe design experience (primary and secondary structure) is also acceptable.
- Past F-22 design experience is desired.
 
Job Number: 10788
Job Location: Fort Worth, TX
Rate: $71.14/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 10 mos
Start Date: ASAP
Input Date: 04/15/2019
Last Updated: 08/20/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
Location: Palmdale, CA
Rate: DOE
Duration: 1 year contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

Job Description:
- Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design.
- Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations.
- Will support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations.
- Will work production floor support from receipt of problem, coordination of answer to release of engineering change.
- Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight.
- Establishes structural specifications, performs stress analysis, and conducts performance tests. '


Required Skills:
- Catia V5 experience is required.
- Airframe Design experience is required.
- Airframe Layout and preliminary design is a plus.
- Experience designing composites is a plus.
- Experience with Siemens Fibersim is a plus.
- Experience with Siemens Teamcenter is a plus.


Education:
- Level 4: BS+16 YRS or MS+14 YRS
 
Job Number: 10718
Job Location: Palmdale, CA
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 04/03/2019
Last Updated: 07/29/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
Location: Palmdale, CA
Rate: DOE
Duration: 1 year contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

Job Description:
- Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design.
- Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations.
- Will support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations.
- Will work production floor support from receipt of problem, coordination of answer to release of engineering change.
- Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight.
- Establishes structural specifications, performs stress analysis, and conducts performance tests. '


Required Skills:
- Catia V5 experience is required.
- Airframe Design experience is required.
- Airframe Layout and preliminary design is a plus.
- Experience designing composites is a plus.
- Experience with Siemens Fibersim is a plus.
- Experience with Siemens Teamcenter is a plus.


Education:
- Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 10716
Job Location: Palmdale, CA
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 04/03/2019
Last Updated: 07/29/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer - Clearance - 10 openings! CA

Description:
1459-1S5 Aeronautical Engineer
Work Location: Palmdale, CA
Status: Open

Request: Engineering - Aeronautical Engineer
Qty: 10
Desired Start Date: 4/10/2019
End Date: 4/10/2020

Job Description:
Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design. Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations. Will support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations. Will work production floor support from receipt of problem, coordination of answer to release of engineering change. Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight. Establishes structural specifications, performs stress analysis, and conducts performance tests.

Catia V5 experience is required.
Airframe Design experience is required.
Airframe Layout and preliminary design is a plus.
Experience designing composites is a plus.
Experience with Siemens Fibersim is a plus.
Experience with Siemens Teamcenter is a plus.

Level: Level 3: BS+9-15 YRS or MS+7-13 YRS


Experience
Areas of Expertise CATIA Yes 1 4 - 6 Years
Areas of Expertise Composites and Materials No 2 2 - 4 Years
 
Job Number: JE-1459-1S5
Job Location: Palmdale, CA
Rate: open rate
Per Diem: no
Duration: 12 months
Input Date: 06/12/2019
Last Updated: 07/31/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer - Clearance - 10 openings! CA

Description:
1458-1 Aeronautical Engineer
Work Location: Palmdale, CA
Status: Open

Qty: 10
Desired Start Date: 4/10/2019
End Date: 4/10/2020

Job Description:
Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design. Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations. Will support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations. Will work production floor support from receipt of problem, coordination of answer to release of engineering change. Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight. Establishes structural specifications, performs stress analysis, and conducts performance tests.

Catia V5 experience is required.
Airframe Design experience is required.
Airframe Layout and preliminary design is a plus.
Experience designing composites is a plus.
Experience with Siemens Fibersim is a plus.
Experience with Siemens Teamcenter is a plus.

Level: Level 4: BS+16 YRS or MS+14 YRS

Experience
Areas of Expertise CATIA Yes 1 6 + Years
Areas of Expertise Composites and Materials No 2 2 - 4 Years
 
Job Number: JE-1458-1S5
Job Location: Palmdale, CA
Rate: open rate
Per Diem: no
Duration: 12 months
Input Date: 04/02/2019
Last Updated: 07/31/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer / Catia V5 airframe design composites Fibersim - Clearance URGENT NEED CA

Description:
1090-1 Aeronautical Engineer / Catia V5

Work Location: Palmdale, CA
Status: Open

Qty: 10
12 months

Job Description:
Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design. Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations. Will support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations. Will work production floor support from receipt of problem, coordination of answer to release of engineering change. Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight. Establishes structural specifications, performs stress analysis, and conducts performance tests.

Catia V5 experience is required.
Airframe experience is required.
Experience designing composites is a plus.
Experience with Siemens Fibersim is a plus.

Work Location: Palmdale, CA
Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
Pay Rate: $68.00 Hourly

Experience
Areas of Expertise CATIA Yes 1 4 - 6 Years
Areas of Expertise Composites and Materials No 2 2 - 4 Years
 
Job Number: JE-1090-1S5
Job Location: Palmdale, CA
Rate: 68/hr max
Per Diem: no
Duration: 12 months
Input Date: 04/18/2019
Last Updated: 07/17/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer / Systems Design & Installation Engineer / 3D Catia GD&T - Clearance CA

Description:
1461-1 Aeronautical Engineer

Work Site Address: Palmdale, CA 93599
Max Pay Rate: Open rate
Status: Open

Qty: 5
Desired Start Date: 4/15/2019
End Date: 4/14/2020

Job Description:
This position is for a Systems Design & Installation Engineer. A successful candidate will have a complete understanding of the technical principles, theories and concepts to integrate systems that include some, but not all of the following systems: avionics, fuel, hydraulics, secondary power, landing gear and environmental control for advanced aircraft. The candidate will coordinate efforts across a wide range of functional organizations including Airframe Design, Quality Assurance, Planning, Tooling, Structural Analysis, Materials & Processes, Flight Sciences, Test and Manufacturing.

Responsibilities for this position include:

• Development, test, and validation of new and modified system designs.
• Creation and/or modification of primary and secondary structure with 3-D CATIA models, assemblies and installations.
• Creation and/or modification of system requirements, interface/supplier control drawings, performance specifications, system checkout procedures, statements of work, trade studies, and component/ground/flight test plans.
• Coordination with suppliers, internal and external integrated product teams, management and the customer.
• Technical engineering support for manufacturing, installation and testing at client site and external supplier facilities.


3-D CATIA experience is required.
Geometric Dimensioning and Tolerancing (GD&T) experience is required.


Level: Level 3: BS+9-15 YRS or MS+7-13 YRS

Areas of Expertise CATIA Yes 1 6 + Years
Areas of Expertise Design No 3 6 + Years
Technical Skills Geometric Dimensioning and Tolerancing (GD&T) Yes 2 6 + Years
Technical Skills Stress Analysis No 3 6 + Years
Technical Skills Systems Analysis & Design Skills No 3 6 + Years
 
Job Number: JE-1461-1S5
Job Location: Palmdale, CA
Rate: open rate
Per Diem: no
Duration: 12 months
Input Date: 04/29/2019
Last Updated: 07/18/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer / Systems Design & Installation Engineer / 3D Catia GD&T - Clearance CA

Description:
1463-1 Aeronautical Engineer
Work Location: Palmdale, CA
Status: Open

Request: Engineering - Aeronautical Engineer
Qty: 2
Desired Start Date: 4/12/2019
End Date: 4/11/2020

Job Description:
This position is for a Systems Design & Installation Engineer. A successful candidate will have a complete understanding of the technical principles, theories and concepts to integrate systems that include some, but not all of the following systems: avionics, fuel, hydraulics, secondary power, landing gear and environmental control for advanced aircraft. The candidate will coordinate efforts across a wide range of functional organizations including Airframe Design, Quality Assurance, Planning, Tooling, Structural Analysis, Materials & Processes, Flight Sciences, Test and Manufacturing.

Responsibilities for this position include:

• Development, test, and validation of new and modified system designs.
• Creation and/or modification of primary and secondary structure with 3-D CATIA models, assemblies and installations.
• Creation and/or modification of system requirements, interface/supplier control drawings, performance specifications, system checkout procedures, statements of work, trade studies, and component/ground/flight test plans.
• Coordination with suppliers, internal and external integrated product teams, management and the customer.
• Technical engineering support for manufacturing, installation and testing at Lockheed Martin and external supplier facilities.
• The candidate may function in a project leadership role where they manage system performance, budget and schedule.

3-D CATIA experience is required.
Geometric Dimensioning and Tolerancing (GD&T) is required.


Level: Level 4: BS+16 YRS or MS+14 YRS


Areas of Expertise CATIA Yes 1 6 + Years
Areas of Expertise Design No 3 6 + Years
Technical Skills Geometric Dimensioning and Tolerancing (GD&T) Yes 2 6 + Years
Technical Skills Stress Analysis No 3 6 + Years
Technical Skills Systems Analysis & Design Skills No 3 6 + Years
 
Job Number: JE-1463-1S5
Job Location: Palmdale, CA
Rate: open rate
Per Diem: no
Duration: 12 months
Input Date: 04/15/2019
Last Updated: 07/18/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Aerospace Engineer - Air Systems

Description:
  1. Support Flight Testing Activities, including but not limited to:
    1. Discuss and review test plans and preparation activities.
    2. Help determine test specifications (based upon system architecture).
    3. Attend Ground/Flight Test briefing and debriefings
    4. Participate in Test Readiness Reviews and ensure on-time Engineering deliverables.
    5. Generate developmental engineering drawings and instrumentation change requests as required.
    6. Monitor live flight data, typically via telemetry, during flight test on aircraft.
    7. Create and review Aircraft Restrictions
    8. Create and review Aircraft Troubleshootings
    9. Create, review and approve ground test procedures, flight test procedures and their corresponding test reports.
    10. Coordinate with suppliers to review technical data, certification requirements and troubleshoot any issues with supplies.
    11. Process, analyze, and draw conclusions from post flight data.
    12. Identify non-conformances, quality escapes, etc. to create rejection tags.
    13. Make assessments to ensure safety of flight determination.
    14. Document flight test design problems for long term fix.
    15. Generate and review appropriate limitations documentation.
    16. Write flight test results reports.

  2. Complete special projects and tasks assigned by Group Lead.

  • Level Requirements (Minimum):
    Education
     
  • Four (4) year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation). 
    • Other Engineering fields may be considered.

  • Experience
     
  • Four (4) years aerospace engineering experience in air systems, including experience in aircraft cabin temperature controls, low pressure cabin air distribution, avionics cooling, cabin pressurization, fire protection and anti-ice systems.



Knowledge/Skills/Abilities:
 
  • Strong knowledge of flight test operations and flight certification, including knowledge of aircraft cabin temperature controls, low pressure cabin air distribution, avionics cooling, cabin pressurization, fire protection and anti-ice systems.
  • Good leadership presence as well as people management skills: 
    • Future-oriented in thinking and operation.
    • Able to lead by example and live/work by company values.
    • Ability to successfully contribute to a positive and productive work environment.
    • Able to instill a sense of urgency in team members.
    • Able to be patient and objective in difficult situations with different types of people.

  • Strong skill set for: 
    • Professional mannerisms, appearance and actions (self-confident and committed to high ethics).
    • Strong follow-through, quick thinking and resourceful.
    • Ability to remain calm, cool and collected in stressful situations.
    • Strong sense of urgency to resolve the issue.

  • Strong organizational, time management and prioritization skills:
    • Able to multi-task, maintain focus on several different projects at one time and hit deadlines.
    • Able to be flexible with attention and priority.
    • Ability to work in a progressive, fast-paced environment (work well under pressure).

  • Strong analytical skills, with an ability to troubleshoot, problem-solve and effectively and efficiently make decisions.
  • Strong communication skills (oral, written, presentation) with both external and internal team.
    • Act as an active listener, seeking to understand and then to be understood, articulating clearly and confidently.
    • Uses people relationship and business management skills to make decisions on what and when to communicate with employees and customers.
    • Excels at communicating clearly and effectively verbally. Strong proficiency in writing summaries, documents, reports, and presentations.
    • Strong interpersonal skills, with the ability to build strong relationships at all levels. Ability to influence others as well as relate to individuals at all levels of the organization.
    • Good project management skills, including the ability to take ownership for accomplishing assigned tasks. Results-oriented planner and delegator who ensures that goals are met. Able to set priorities and keep to projected schedules.
    • Computer Skills: Comfortable and effective working in Microsoft Office. Intermediate Excel proficiency required. Able to quickly learn new software and systems. 
    • Proven track record of improving the efficiency of assigned processes or procedures.
       
       


 
Job Number: 1810087672
Job Location: Seattle, WA
Duration: 6 months
Input Date: 06/27/2018
Last Updated: 08/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mYpuAAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineer - Electrical Systems

Description:
We are currently looking for an experienced Aerospace Engineer - Electrical Systems to fill an opening with a company located in Moses Lake, WA. Interested candidates should have aerospace engineering experience in Electrical Systems, including experience in the electrical aspects of the various systems and components and/or controllers on the airplane (e.g. ECS, Fuel, hydraulics, engines, fire protections, anti-ice, lights, electrical power, writing, etc.).

Responsibilities of the Aerospace Engineer - Electrical Systems

Review and support Certification Activities.
Create and review Certification Plans.
Create and review Component Qualification Test Plans, Qualification Test Procedures and Qualification Test Plans.
Review qualification by similarity and/or analysis reports.
Review system safety documents (PSSA, SFHA, ADHA, SSA and Particular Risk Analysis).
Create, review and approve ground test procedures, flight test procedures and their corresponding test reports.
Perform Component Drawing Reviews.
Complete aircraft assembly and installation drawing reviews.
Participate in System Design Reviews.
Coordinate with suppliers.
Coordinate with certification authorities.
Review certification guidance material (advisory circulars, etc.) and incorporate the necessary guidance into the certification plans.
Discuss, write and review test plans and preparation activities with flight test team.
Help prepare and review pre and post flight briefing.
Monitor live flight data, typically via telemetry, during flight test on aircraft.
Process, analyze, and draw conclusions from post flight data. Identify non-conformances, quality escapes, etc. to crate rejection tags.
Make assessments to ensure safety of flight determination.

Requirements of the Aerospace Engineer - Electrical Systems

Bachelor’s degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation). Other Engineering fields may be considered.
Aerospace engineering experience in Electrical Systems, including experience in the electrical aspects of the various systems and components and/or controllers on the airplane (e.g. ECS, Fuel, hydraulics, engines, fire protections, anti-ice, lights, electrical power, writing, etc.).
Knowledge of flight test operations and flight certification, including knowledge of electrical aspects of the various systems and components and/or controllers on the airplane.
Solid leadership presence as well as people management skills
Strong proficiency in writing summaries, documents, reports, and presentations.
Excellent project management skills, including the ability to take ownership for accomplishing assigned tasks.
Comfortable and effective working in Microsoft Office. Intermediate Excel proficiency required.
Proven track record of improving the efficiency of assigned processes or procedures.
 
Job Location: Moses Lake, WA
Start Date: ASAP
Input Date: 07/08/2019
Last Updated: 07/22/2019
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Technical Writer

Description:
Testing and Troubleshooting Writer

Location: Shelton, CT OR West Lafayette, IN OR Huntsville, AL

12+ month contract

Butler Aerospace & Defense is seeking an experienced technical writer to work in our writing group authoring the troubleshooting section of maintenance manuals. This position is in support of contracted technical manual revision services and the creation of new publications. The writer’s duties would include researching, documenting, and authoring detailed testing and troubleshooting procedures to the governing specification. The writer will be required to interface with engineers on occasion over the content and review of the publications.



Technical Skills:

Experience with writing maintenance procedures from engineering documentation in the aerospace industry.
Familiar with the operation and maintenance of aircraft systems.
Able to read and interpret assembly/installation blueprints, schematics, wiring diagrams, technical manuals, military specifications, vendor data, and various forms of engineering data.
Possess strong analytical/editorial skills. Be able to review incorporated technical data and provide feedback.
Proficient with desktop publishing using content management software.
Experience with SGML/XML structured document authoring such as EpicEditor or equivalent.
Strong computer skills with a working knowledge of Adobe Acrobat and Microsoft Office.
Preferred, but not required:
Rotary aircraft experience
Avionics technician, or equivalent military experience in aircraft maintenance
Familiar with the use of aircraft technical manuals and related technical data
Experience with Content@ content management software and XyVision publishing software
Experience with specification S1000D
Personal Skills:

Detail-oriented
Process/analytical-oriented
Task/goal-oriented
Team-oriented
Quality-driven
Strong professional communication skills/ability to interact effectively with coworkers
Strong organizational/time management skills
Self motivated
Ability to work under pressure and meet deadlines
Manage multiple jobs with tight deadlines in fast-paced environment
Strong, customer-focused work ethic and positive attitude
Mentoring


Work Experience:

5 years technical writing experience


Areas of Responsibility:

Research, writing, and development of portions of aircraft maintenance manual revisions according to the governing specification and published standard work
Develop concise, complete, technically accurate, and easy to understand technical information in a timely fashion with a very high level of quality
Conduct technical reviews of other writers’ work. Reviews and analyzes the technical information/documents that are incorporated into technical manuals
Provide frequent status
Meet internal and external delivery milestones


Education:

4 year college degree
Work Environment:

Office environment














____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 57051
Job Location: CT, IN, or AL, CT, IN, or AL
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12+ months
Start Date: ASAP
Input Date: 07/05/2019
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

Aircraft Assembly Technician

Description:
PDS Tech, Inc. is seeking an Aircraft Assembly Technician in Mesa, AZ.

Summary:
  • Assemble, disassemble, install, test and troubleshoot mechanical and electrical assemblies and subassemblies on aircraft systems.
  • Follow computer based and other specific processes and systems, including manufacturing planning, wiring diagrams, system schematics, process specifications, engineering sketches, and other forms of written and oral instructions.
  • Follow specific tool control, FOD control and safety guidelines and policies.
  • Prefer At least 2 - 3 years recent experience with mechanical, electrical/avionics, sheet metal or composites on aircraft systems.
  • Need experience and proficiency in any or all of the following: Flight Control systems (build, install and rig), Fuel system installations, avionics, hydraulics, drive systems, brake systems, aircraft wire installation, Engine (build and install), Canopies and Doors.
  • Rotorcraft experience preferred.
  • A & P License preferred.
  • Must be capable of working 1st or 2nd shift.
  • Work week based on a 9/80 schedule with every other Friday off.


Prerequisites:
  • High School Diploma or GED required. 


 
Job Number: 1910101266
Job Location: Mesa, AZ
Duration: 12 months
Input Date: 04/15/2019
Last Updated: 08/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Mindy Moore
Address: 1839 S ALMA SCHOOL RD STE 250
City, State: MESA, AZ 85210
Phone: 480/929-9922
800 Phone: 800/657-0997
Fax Phone: 480/929-9779
Email: cecjphoenix@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033eDDQAY&URLSource=cjhunter

Aircraft Door Design Engineer

Description:
General Summary:
Engineer, Doors Design is responsible for the conceptual design and production engineering of Aircraft Doors structural and system components. The candidate will be responsible for conceptual layout, detailed design and aircraft production & in-service design and modification.

Duties and Responsibilities:
1. Generates Engineering Models and Drawings utilizing CATIA Version 5.
2. Performs trade studies to identify optimal engineering solution.
3. Collaborates with the Integrated Product Team to resolve cross functional issues.
4. Reviews work performed by others and ensure work is to the highest standard.
5. Implements Industry best engineering practices (design for manufacturing, design for reliability and design for maintainability).
6. Have the ability to understand and apply certification requirements.
7. Implement design solutions optimized for cost and weight.
8. Manages task execution to ensure on-time and on-target completion.
9. Utilizes drafting and Geometrical Dimensioning &Tolerancing knowledge to optimize part design for cost and functionality.
10. Searches for problem root cause and develop corrective action plans and solutions.
11. Serves as an interface within the Doors Engineering group to ensure effective communication, coordination, and timely completion of project milestones.
12. Leads or participates in design / development reviews with management and internal customers. The candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience.

Education, Work Experience, Certification and/or Licensure:

1. BS in Mechanical Engineering with a minimum of 10 years directly related experience designing aviation systems; experience can be substituted for the lack of an appropriate degree
2. Some Travel may be required

Knowledge, Skills and Abilities:
1. Proficient in use of CATIA Version 5.
2. Advanced knowledge of drafting rules.
3. Advanced knowledge of Geometrical Dimensioning and Tolerancing.
4. Proficient in Microsoft Office Products.
5. Use of Team Center.
6. Familiar with FAR Part 23 or Part 25.
7. Functional knowledge of SAP.

The Structures Company is an AA/EOE.
 
Job Number: 321
Job Location: NC
Rate: $60/Hr.
Per Diem: Yes
Overtime: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 08/10/2019
Last Updated: 08/20/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft ECS Control Systems and Simulation Engineer - China

Description:
Our Aerospace Client based in China is looking for additional Engineering Support . They require an Aircraft ECS Control Systems and Simulation Engineer

This is an exciting opportunity to work in East Asia , contributing to the success of our Client's Aircraft Program. Excellent salary / remuneration for suitable skilled and qualified candidates.

Candidates should be prepared to live and work in Shanghai on a fixed term contract basis for 1-3 years.

Please quote ref: JO0008 on application.



Responsibilities:

In charge of ECS system control laws and logic design and
establishing relative guide and process.
In charge of simulating system control laws and logic and establishing relative guide and process.
In charge of verifying system control laws and logic simulation.
In charge of integrating system real time simulation.
In charge of studying system control simulation new technology.
In charge of training of system control simulation.


Skills/ Qualifications / Experience Sought:


Skilled in MatLab simulink tool and other simulation tools.
Skilled in system control laws and logic design.
Skilled in simulating system control laws and logic design.
Versed in integrating and revising real time simulation.
Familiar with DO-178B/C.
Familiar with real time simulation industry standard, guides and new technology.
Experience in civil aircraft real time simulation design.
10 years ECS system control real time simulation experience.
Fluent English, with good communication skills.
 
Job Number: BHJOB28358_56
Job Location: China
Rate: Negotiable
Duration: 1-3 years
Start Date: 01/09/2019
Input Date: 07/04/2019
Firm Name: STRONGFIELD TECHNOLOGIES USA INC
Attention: Graham Bird
Address: 5000 BIRCH ST STE 3000
City, State: NEWPORT BEACH, CA 92660
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Fabrication Technicians

Description:
STS Technical Services is currently hiring Fabrication Technicians in Broomfield, Colorado.
Job Duties:
Manufacture, paint, and/or sew aircraft interior components
Prepare aircraft interior components for paint or upholstery
Apply decorative paints, fabrics, and leather to interior panels and components
Accurately measure, cut, layout, and sew various materials including carpet
Install harnesses, lighting, and other controls onto finished interior components
Maintain proper work order tracking in support of aircraft interior completion
Make templates and patterns for manufacturing and sewing of interior components
Qualifications:
High school diploma or equivalent
3 years upholstery experience preferred
Experience with interior finishing in the aviation, automotive, and/or marine industries a plus
Proficiency sewing materials including leather
Experience applying various fabrics, leathers, and materials for upholstery work
Working knowledge in the operation of various hand tools utilized in the upholstery finishing industry
Ability to read and interpret blueprints and engineering drawings
Ability to lift and carry objects weighing up to 30 lbs
Strong attention to high quality, detailed work
Patience and willingness to perform repetitive routines
Basic computer skills, including familiarity with MS Office
What We Offer:
STS Technical Services works with the largest names in the aviation industry, offering hundreds of career opportunities across the United States. With over two decades of experience, we soar in our commitment to excellence and professionalism. We proudly offer competitive rates, direct deposits, medical insurance, cash advances, and referral bonuses.
If you would like to speak with an Aviation Recruitment Professional directly, call 1-800-359-4787. Our job placement services are always free, and we are open seven days a week. Reach out at any time! Thanks so much for your interest in working with STS AeroStaff Services, and we look forward to speaking with you soon.
 
Job Number: 45431
Job Location: Broomfield, CO
Input Date: 07/11/2019
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Fuel Inerting Systems Engineer - China

Description:
Our Aerospace Client based in China is looking for additional Engineering Support . They require an Aircraft Fuel Inerting Systems Engineer.

This is an exciting opportunity to work in East Asia , contributing to the success of our Client's Aircraft Program. Excellent salary / remuneration for suitable skilled and qualified candidates.

Candidates should be prepared to live and work in Shanghai on a fixed term contract basis for 1-3 years.

Please quote ref: JO0009 on application.



Responsibilities:

Fuel system performance simulation and analysis.
Inerting system performance simulation and analysis.
Fuel tank flammability analysis .
Fuel and inerting system tube stress analysis.
Fuel and inerting system simulation platform building.


Skills/ Qualifications / Experience Sought:


Experience working for main OEM or fuel and inerting system supplier for more than
20 years.
Experience on fuel and inerting system simulation more than 15 years.
Familiar with simulation software, such as Flowmaster, Fluent, CAEPipe, Matlab, Abaqus, etc.
Fluent English, with good communication.
 
Job Number: BHJOB28358_55
Job Location: China
Rate: Negotiable
Duration: 1-3 years
Start Date: 01/09/2019
Input Date: 07/04/2019
Firm Name: STRONGFIELD TECHNOLOGIES USA INC
Attention: Graham Bird
Address: 5000 BIRCH ST STE 3000
City, State: NEWPORT BEACH, CA 92660
Website: www.strongfield.com

Aircraft Interior Design Engineer

Description:
The Interior Design Engineer will perform interior design engineering for cabin & cockpit structures, components, and trim for aircraft. The individual will also on occasion support tasks associated with interior Installations.

Duties and Responsibilities:
1. Creates conceptual designs for interiors of the aircraft through 3D modeling software, drawings, and/or drafting application.
2. Develops designs for form/fit/function to meet customer and design criteria.
3. Provides designs for the fabrication process including sheet metal, extrusions and inject molding
4. Validates engineering designs per engineering core principles, design standards, processes and industry best practices.
5. Makes recommendations to engineering lead/management.
6. Researches and maintains up to date knowledge of technical data pertaining to cabin, cockpit structures, hardware, material, and finishes.
7. Ensures adherence to program schedule.
8. Performs other duties as assigned.

Education, Work Experience, Certification and/or Licensure:
1. 3+ years of engineering experience with at least three years of design engineering experience directly related to mechanical/interior design for commercial aircraft.

Knowledge, Skills and Abilities:
1. Working knowledge of conceptual design development of aircraft interiors.
2. Working knowledge of industry standard (i.e. - parts lists, bill of materials, parts and standards callout, etc).
3. In-depth knowledge of Geometric Dimensioning and Tolerancing (GD&T).
4. Familiarity with 14CFR Part 23/25.
5. Proficiency in CATIA V5 workbenches.
6. Proficiency in Teamcenter (or equivalent PLM tool).
7. Ability to work independently or within a team environment.
8. Ability to communicate effectively throughout all levels within an organization and present data clearly and concisely.
9. Ability to work cross functionally with Quality and Production to resolve issues on the production line.


The Structures Company is an AA/EOE.
 
Job Number: 322
Job Location: NC
Rate: $52-$60/Hr. **DOE**
Per Diem: Yes
Overtime: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 07/24/2019
Last Updated: 08/20/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Interior Technicians

Description:
STS Technical Services is hiring Aircraft Interior Technicians in Nashville, Tennessee!
We are a premiere staffing agency providing high-paying contract and direct-hire employment opportunities. We’d love to partner with you to help you take your career to new heights. Check out the following information about this incredible employment opportunity we have right now with a great client of ours.
Essential Duties & Responsibilities:
Will be performing backshop work as well as interior composite repairs on aircraft
Qualifications:
At least 3 years experience on Regional or Commercial aircraft in an MRO setting.
STS Technical Services
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.
Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!
If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.
STS Technical Services is an equal opportunity employer.
 
Job Number: 47583
Job Location: Nashville, TN
Input Date: 07/11/2019
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Maintenance Technicians

Description:
STS Technical Services is hiring Aircraft Maintenance Technicians in Great Falls, Montana.
Duties & Responsibilities:
Communicate when tasks are complete so next trade can move onto the job.
Ensure work environment is safe and clean. Promote company values, vision, and mission.
Demonstrated capability and competency in field of expertise. Good oral and written communication skills.
Demonstrated ability to work well with other individuals throughout the organization.
Possesses strong fundamental aircraft knowledge. Builds quality capability and responsiveness for company.
Carry out maintenance repairs on customer and company aircraft under the supervision of a qualified technician or Lead Technician.
Completely and accurately sign off work in progress documentation and work cards for work accomplished.
Report unserviceable equipment to assigned Lead Technician and/or delegate.
Notify Lead Technician of all defects discovered during maintenance.
Attend training courses as directed by company management.
Required Qualifications:
2+ years aircraft heavy maintenance experience
Possess excellent oral and written communication skills.
Demonstrated ability to work well with other individuals throughout the organization.
Preferred Experience: A&P License
CRJ 200/900 heavy maintenance experience.
Regional aircraft maintenance experience.
The physical demands described below are representative of those that must be met by an employee to successfully perform the essential functions of the job.
The employee will be required to; Occasionally lift 50 pounds.
Bend, stoop, kneel, crawl and climb ladders.
Stand for extended periods of time .
Work at heights of greater than 10 feet utilizing fall restraint equipment as necessary.
Benefits:
STS Technical Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.
Have questions? Give us a call at 1-800-359-4787.
Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 48059
Job Location: Great Falls, MT
Input Date: 07/11/2019
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Mechanic

Description:
Our client, a global security and aerospace company, is principally engaged in the research, design, development, manufacture, integration and sustainment of advanced technology systems, products and services. Solving complex challenges and delivering innovative solutions to help customers keep people safe and provide them essential services, our client is hiring for the following critical need:


Aircraft Mechanic
(U.S. Citizenship Required*)
Lexington, KY
2019-9083
Responsibilities:
• Maintain, repair, and modify aircraft structures and structural components of moderate difficulty
• Maintain/repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components
• Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions
• Apply required expertise in restoring equipment condition and or operation
• Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals.
• Must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts
• Requires broad knowledge of aircraft sheet metal/structural modifications and repair
• Must have basic knowledge of electrical theory
• Must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers.
• Requires working knowledge of technical publications.
• Will receive technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.
• Must be able to prioritize workload to maintain schedules on assigned projects.

Qualification:
• Interim Security Clearance is required at time of hire. Active Secret Security Clearance is preferred.
• This position supports a 4/10 work schedule.
• Must be able to work shift schedules during this duration as required by program schedule and customer requirements.
• Must be proficient in reading and interpreting schematics, engineering drawings and technical manuals / technical orders.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor’s Degree combined with 3+ years of experience; or Master’s Degree
• Minimum 3 years of experience with one of the listed airframes H-60, AH-64, CH-47 or OH-58.
• Documented Military/DOD Service School or Civilian/FAA equivalent training desired.
• MH-60M experience preferred.
• Depot Maintenance Repair experience

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-9083
Job Location: Lexington, KY
Input Date: 07/10/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Mechanic

Description:
Our client, a global security and aerospace company, is principally engaged in the research, design, development, manufacture, integration and sustainment of advanced technology systems, products and services. Solving complex challenges and delivering innovative solutions to help customers keep people safe and provide them essential services, our client is hiring for the following critical need:


Aircraft Mechanic
(U.S. Citizenship Required*)
Lexington, KY
2019-9089

Responsibilities:
• Repair and modify aircraft structures and structural components of moderate difficulty, maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components
• Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals.
• Receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.

Qualification:
• Interim Secret Security Clearance is the minimum requirement to start. Active Secret Clearance is preferred.
• This position supports a 4/10 work schedule.
• Must be able to prioritize workload to maintain schedules on assigned projects.
• Must have basic knowledge of electrical theory
• Must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers.
• Must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts
• Working knowledge of technical publications.
• Broad knowledge of aircraft sheet metal/structural modifications and repair
• Must have experience and ability to operate or perform one or more of the following:
o Aircraft structural experience in modification to include but not limited to structural TM/TO repairs, build to print assembly and installation.
o Must have a common knowledge of tooling required for performance of aircraft structural work.
o Must be a qualified aviation sheet metal mechanic, employee must have experience in aviation sheet metal, hardware installation such as rivet installation, HI-Loc installation, etc.
o Must have fabrication to facilitate plane side repairs.
• Must have advanced Sheetmetal skills that can work with little direction on complex modifications.
• Must be able to work shift schedules during this duration as required by program schedule and customer requirements.
• Must have a high school diploma, or equivalent.
• Must be proficient in reading and interpreting schematics, engineering drawings and technical manuals / technical orders.
• Depot Maintenance Repair experience
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor’s Degree combined with 3+ years of experience; or a Master’s Degree
• Minimum 3 years intermediate level aircraft repair or modification experience required.
• Minimum 3 years of experience with one of the listed airframes H-60, AH-64, CH-47 or OH-58. MH-60M experience preferred.
• Documented Military/DOD Service School or Civilian/FAA equivalent training desired.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-9089
Job Location: Lexington, KY
Duration: 3 Months
Input Date: 07/08/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Mechanic

Description:
Our client, a global security and aerospace company, is principally engaged in the research, design, development, manufacture, integration and sustainment of advanced technology systems, products and services. Solving complex challenges and delivering innovative solutions to help customers keep people safe and provide them essential services, our client is hiring for the following critical need:


Aircraft Mechanic
(U.S. Citizenship Required*)
Lexington, KY
2019-9088

Responsibilities:
• Troubleshoot malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems.
• Repair, replace, and rebuild aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and equipment such as shears, sheet metal brake, welding equipment, rivet gun, and drills.
• Read and interpret manufacturers' and airline's maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.
• Perform 100-hour, progressive, isochronal, phase, periodic, and other hourly or calendar inspections, examines reciprocating engines for cracked cylinders and oil leaks, and listens to operating engine to detect and diagnose malfunctions, such as sticking or burnt valves, inspects jet engines and components for cracks, corrosion, foreign object damage, burned areas, distortions, security, warping, wear, and missing segments.
• Inspect jet engine turbine blades to detect cracks, distortion, corrosion, burn-out, security, or breaks, tests engine operation, using testing equipment, such as ignition analyzer, compression checker, distributor timer, ammeter, and jet calibration (Jetcal) tester, to locate source of malfunction.
• Work involves: replacing or repairing worn or damaged components, such as carburetors, alternators, magnetos, fuel controls, fuel pumps, oil pumps, and engine mounted gearboxes, and compressor bleed valves using hand tools, gauges, and testing equipment; removing engine from aircraft, using hoist or forklift truck, disassembling and inspecting parts for wear, cracks, security, or other defects, and repairing or replacing defective engine parts and reassembles and installs engine in aircraft.
• Adjust, repair, or replace electrical wiring system and aircraft accessories, perform preflight, thru-flight, and post-flight maintenance inspections, perform miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens and filters, greasing moving parts, and checking brakes.
• Supervise the jacking and towing of aircraft, enters in the maintenance records description of the work performed and verifies the work was performed satisfactorily, may service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition, may specialize in work, repair and modification of structural, precision, and functional spare parts and assemblies, and may specialize in engine repair.
• May be required to be licensed by Federal Aviation Administration.

Qualification:
• Interim Secret Security Clearance is the minimum requirement to start. Active Secret Clearance is preferred.
• This position supports a 4/10 work schedule.
• Must be able to travel when required. This requirement may encompass 20% - 40% of the work year.
• Must have H-60 experience. H-47 experience is also welcome.
• Must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts.
• Must have experience installing and testing of electrical/avionic systems. Experience in wiring schematics and wire running of Aircraft a plus.
• Must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers.
• Working knowledge of technical publications.
• Receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.
• Must be able to prioritize workload to maintain schedules on assigned projects.
• Must be able to work Overtime as needed.
• Must be able to work multiple shifts as required for need of schedule/budget.
• Familiar with the MOC’s and troubleshooting of engine control systems, ASE, directional and communications radios, CAAS cockpit integration, digital auto-pilot and Stabilator.
• Proficient in reading and interpreting schematics, engineering drawings and technical manuals.
• Familiar with documenting work in logbook, performing PMD and 40 Hour inspections.
• Able to perform fuel systems checks to include refuel and defuel operations and checking valve logic, fuel operations testing and MOC. Troubleshooting of fuel system to include but not limited to electrical, fuel flow rates, and mechanical failures.
• Knowledgeable of APU operations and troubleshooting, aircraft generator troubleshooting to include electrical and mechanical failures. Service hydraulic systems, engine, transmission and gear boxes. Perform flight control rigging, MOC’s and troubleshooting to include but not limited to electrical, hydraulic and mechanical failures.
• Able to assist Quality in performing aircraft weight and balance and preparing aircraft for flight. Additional duties to include removal and reinstallation of aircraft panels, cabin floors, cabin and cockpit doors.
• Able to assist in performing structural and mechanical modifications and repairs if necessary/required.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor’s Degree combined with 0-2 years of experience.

Conditions of Employment:
s selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.
Accepted s will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-9088
Job Location: Lexington, KY
Duration: 3 Months
Input Date: 07/08/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Aircraft Mechanic I - Clearance KY

Description:
165376
Job Title: SCA Aircraft Mechanic I
Work Site Address: Lexington, KY 40516
Job Number: 1746-1
Max Pay Rate: $30.29/hr
Start Date: 7/15/2019
End Date: 10/13/2019
Position Type: Contract

Job Summary:
The Aircraft Mechanic I (Electrical)troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems. This mechanic repairs, replaces, and rebuilds aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and equipment such as shears, sheet metal brake, welding equipment, rivet gun, and drills. This worker reads and interprets manufacturers' and airline's maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. This mechanic performs 100-hour, progressive, isochronal, phase, periodic, and other hourly or calendar inspections, examines reciprocating engines for cracked cylinders and oil leaks, and listens to operating engine to detect and diagnose malfunctions, such as sticking or burnt valves, inspects jet engines and components for cracks, corrosion, foreign object damage, burned areas, distortions, security, warping, wear, and missing segments. Inspects jet engine turbine blades to detect cracks, distortion, corrosion, burn-out, security, or breaks, tests engine operation, using testing equipment, such as ignition analyzer, compression checker, distributor timer, ammeter, and jet calibration (Jetcal) tester, to locate source of malfunction. Work involves: replacing or repairing worn or damaged components, such as carburetors, alternators, magnetos, fuel controls, fuel pumps, oil pumps, and engine mounted gearboxes, and compressor bleed valves using hand tools, gauges, and testing equipment; removing engine from aircraft, using hoist or forklift truck, disassembling and inspecting parts for wear, cracks, security, or other defects, and repairing or replacing defective engine parts and reassembles and installs engine in aircraft. Job duties require that this mechanic: adjusts, repairs, or replaces electrical wiring system and aircraft accessories, performs preflight, thru-flight, and post-flight maintenance inspections, performs miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens and filters, greasing moving parts, and checking brakes. This incumbent supervises the jacking and towing of aircraft, enters in the maintenance records description of the work performed and verifies the work was performed satisfactorily, may service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition, may specialize in work, repair and modification of structural, precision, and functional spare parts and assemblies, and may specialize in engine repair. This worker may be required to be licensed by Federal Aviation Administration.

Qualifications and Education Requirements
Applicant must have H-60 experience. H-47 experience is also welcome.
-Applicant must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts.
-Applicant must have experience installing and testing of electrical/avionic systems. Experience in wiring schematics and wire running of Aircraft a plus.
-Applicant must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers.
This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.
Must be able to prioritize workload to maintain schedules on assigned projects.
-Applicant must be able to travel when required. This requirement may encompass 20% - 40% of the work year.
-Applicant must be able to work Overtime as needed.
-Applicant must be able to work multiple shifts as required for need of schedule/budget.

Preferred Skills
Applicant shall be familiar with the MOC’s and troubleshooting of engine control systems, ASE, directional and communications radios, CAAS cockpit integration, digital auto-pilot and Stabilator.
-Applicant shall be proficient in reading and interpreting schematics, engineering drawings and technical manuals.
-Applicant shall be familiar with documenting work in logbook, performing PMD and 40 Hour inspections.
-Applicant shall be able to perform fuel systems checks to include refuel and defuel operations and checking valve logic, fuel operations testing and MOC. Troubleshooting of fuel system to include but not limited to electrical, fuel flow rates, and mechanical failures.
-Applicant shall be knowledgeable of APU operations and troubleshooting, aircraft generator troubleshooting to include electrical and mechanical failures. Service hydraulic systems, engine, transmission and gear boxes. Perform flight control rigging, MOC’s and troubleshooting to include but not limited to electrical, hydraulic and mechanical failures.
-Applicant shall be able to assist Quality in performing aircraft weight and balance and preparing aircraft for flight. Additional duties to include removal and reinstallation of aircraft panels, cabin floors, cabin and cockpit doors.
-Applicant shall be able to assist in performing structural and mechanical modifications and repairs if necessary/required.

Qty 4 positions needed
This position is for an Electrical/Avionics mechanic. The candidate will be working on electrical modifications and repairs.
 
Job Number: JE-1746-1S
Job Location: Lexington, KY
Rate: 30.29/hr max
Duration: 3 months
Input Date: 07/11/2019
Last Updated: 08/20/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Aircraft Mechanic II

Description:
Chipton-Ross is seeking an Aircraft Mechanic II for an opening in Lexington, KY.

RESPONSIBILITIES
This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals. Job requirements: must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects.

REQUIREMENTS
Desired Applicant must have experience and ability to operate or perform one or more of the following:
Aircraft structural experience in modification to include but not limited to structural TM/TO repairs, build to print assembly and installation. The candidate must have a common knowledge of tooling required for performance of aircraft structural work. Must be a qualified aviation sheet metal mechanic, employee must have experience in aviation sheet metal, hardware installation such as rivet installation, HI-Loc installation, etc. Candidate must have fabrication to facilitate plane side repairs.
Candidate must have advanced sheetmetal skills that can work with little direction on complex modifications.
- Must be able to work shift schedules during this duration as required by program schedule and customer requirements.
- Candidate must have a high school diploma, or equivalent.
- Minimum 3 years intermediate level aircraft repair or modification experience required.
- Must be proficient in reading and interpreting schematics, engineering drawings and technical manuals / technical orders.
- Minimum 3 years experience with one of the listed airframes H-60, AH-64, CH-47 or OH-58.

DESIRED
MH-60M experience preferred.
- Documented Military/DOD Service School or Civilian/FAA equivalent training desired.
- Depot Maintenance Repair experience

WORK SCHEDULE
4/10

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 180169
Job Location: Lexington, KY
Rate: Up to $31.59 DOE
Duration: 3 Months
Input Date: 07/02/2019
Last Updated: 08/20/2019
Firm Name: CHIPTON ROSS
Attention: Melody Mullins
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: mmullins@chiptonross.com
Website: www.chiptonross.com

Aircraft Mechanic II

Description:
Chipton-Ross is seeking an Aircraft Mechanic II for an opportunity in Lexington, KY

RESPONSIBILITIES:
This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals.

REQUIRED EXPERIENCE:
must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects.
- Minimum 3 years intermediate level aircraft repair or modification experience required.
- Must be proficient in reading and interpreting schematics, engineering drawings and technical manuals / technical orders.
- Minimum 3 years experience with one of the listed airframes H-60, AH-64, CH-47 or OH-58.

Desired skills :
MH-60M experience preferred.
- Documented Military/DOD Service School or Civilian/FAA equivalent training desired.
- Applicants with a current active Secret level security clearance.
- Depot Maintenance Repair experience

EDUCATION:
Accredited High School Diploma/GED

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

WORK HOURS:
Full-Time, 4/10
Must be able to work shift schedules during this duration as required by program schedule and customer requirements.
 
Job Number: 180155
Job Location: Lexington, KY
Rate: $DOE
Duration: 3 MONTHS
Input Date: 07/01/2019
Last Updated: 08/20/2019
Firm Name: CHIPTON ROSS
Attention: Emmanuel Morgan
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: emorgan@chiptonross.com
Website: www.chiptonross.com

Aircraft Mechanic II - Clearance KY

Description:
165377
Job Title: SCA Aircraft Mechanic II
Work Site Address: Lexington, KY 40516
Job Number: 1749-1
Max Pay Rate: $31.59/hr
Start Date: 7/15/2019
End Date: 10/13/2019
Position Type: Contract

Job Summary:
This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals. Job requirements: must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects.


Qualifications and Education Requirements
Desired Applicant must have experience and ability to operate or perform one or more of the following:
Aircraft structural experience in modification to include but not limited to structural TM/TO repairs, build to print assembly and installation. The candidate must have a common knowledge of tooling required for performance of aircraft structural work. Must be a qualified aviation sheet metal mechanic, employee must have experience in aviation sheet metal, hardware installation such as rivet installation, HI-Loc installation, etc. Candidate must have fabrication to facilitate plane side repairs.
Candidate must have advanced sheetmetal skills that can work with little direction on complex modifications.
- Must be able to work shift schedules during this duration as required by program schedule and customer requirements.
- Candidate must have a high school diploma, or equivalent.
- Minimum 3 years intermediate level aircraft repair or modification experience required.
- Must be proficient in reading and interpreting schematics, engineering drawings and technical manuals / technical orders.
- Minimum 3 years experience with one of the listed airframes H-60, AH-64, CH-47 or OH-58.

Preferred Skills
MH-60M experience preferred.
Documented Military/DOD Service School or Civilian/FAA equivalent training desired.
Depot Maintenance Repair experience

Qty 8 positions needed
This position is for a structural mechanic. The candidate will be working on structural modifications and repairs.
 
Job Number: JE-1749-1S
Job Location: Lexington, KY
Rate: 31.59/hr max
Duration: 3 months
Input Date: 07/11/2019
Last Updated: 08/20/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Aircraft Mechanics

Description:
Role Description
  1.  Service, repair, troubleshoot and modify aircraft and aircraft engines.
  2. Repair, replace and rebuild aircraft structures, system and functional components.
  3. Assemble and install electrical, plumbing, mechanical, hydraulic, structural components and accessories using hand tools and power tools.
  4. Adjust, align and calibrate aircraft systems using hand tools, gauges and test equipment, machines and equipment such as shears, sheet metal brakes, welding equipment, pneumatic tools.
  5. Research and understand FAA technical data relevant to assigned tasks.
  6. Maintain the premises in a clean and organized manner.
  7. Remove and/or install aircraft components, test IAW MM, and troubleshoot aircraft systems.

Knowledge/Skills/Abilities:
 
  • Strong knowledge in FAA regulations, Aviation Rules (FOD’s, Safety, Quality, Hazardous Materials, Aircraft Marshalling), aerodynamics, aircraft electrical systems, materials science, aircraft maintenance, electrical testing, instrumentation, gas turbine and piston power plants.


  • Good leadership (individual contributor) presence:

    • Able to lead by example and live/work by company values. 
    • Ability to successfully contribute to a positive and productive work environment.
    • Able to instill a sense of urgency in team members. 
    • Able to be patient and objective in difficult situations with different types of people.



  • Good customer service tool box:

    • Professional mannerisms, appearance and actions (self-confident and committed to high ethics).
    • Strong follow-through, quick thinking and resourceful.
    • Ability to remain calm, cool and collected in stressful situations.
    • Strong sense of urgency to address and solve important issues.

  • Good organizational, time management and prioritization skills:
    • Able to multi-task, maintain focus on several different projects at one time and hit deadlines. 
    • Able to be flexible with attention and priority.
    • Ability to work in a progressive, fast-paced environment (work well under pressure).

  • Good analytical skills, with an ability to troubleshoot, problem-solve and effectively and efficiently make decisions.
  • Good communication skills (oral, written) with customers.  
    • Act as an active listener, seeking to understand and then to be understood, articulating clearly and confidently.

  • Good interpersonal skills, with the ability to build strong relationships at all levels. Ability to influence others as well as relate to individuals at all levels of the organization. 
  • Good project management skills, including the ability to take ownership for accomplishing assigned tasks.  Results-oriented planner who ensures that goals are met.  Able to set priorities and keep to projected schedules.
  • Computer Skills:  Comfortable and effective working in Microsoft Office, including Word, Excel, Outlook, and PowerPoint.

 
Education
 
  • Associate’s Degree (or Technical School equivalent) in Aircraft Maintenance or related field from an FAA accredited school   
  • A&P Certificate
  • Japanese Bilingual preferred

 
Experience
 
  • Three (3) plus years of aircraft mechanical experience preferred

 
Job Number: 1810089104
Job Location: Moses Lake, WA
Duration: 6 months
Input Date: 02/06/2019
Last Updated: 08/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mf2gAAA&URLSource=cjhunter

Aircraft Operations Analyst

Description:
PDS Tech is seeking a top performer for a key role within the Sales & Marketing Team. You are a marketing specialist and an experienced industry expert, expected to provide world-class solutions for our teams, our customers and prospects in support of marketing the Company's family of aircraft against competitor types.  You understand industry and customer needs in order to support all objectives of the Marketing team.

In this role, you are the subject matter expert (SME) for aircraft performance analysis and the aircraft performance analysis tool used by marketing, in order to help promote the operational advantages of the Company's family of aircraft.  You will also manage, maintain and administer the performance analysis tool used by marketing.

Responsibilities include:
 
  • Analyze complex problems in the areas of aircraft performance and aircraft operations and possess initiative and judgment to recognize implications of results in supporting marketing and sales strategies.
  • Propose solutions to unusual problems and make recommendations that are generally accepted as accurate and feasible.
  • Support both structured and ad hoc training requirements to develop the subject matter discipline within the Marketing team.
  • Act as focal and SME for Marketing’s aircraft performance analysis tool and provide input and guidance into the tool’s maintenance and development.
  • Liaison with Engineering and assist in managing relationships with 3rd party suppliers.

  • Degree in Mathematics, Sciences, Engineering, Transportation Planning and Management or similar preferred.
  • A minimum of three (3) years of experience in Aircraft Performance Engineering. 
  • A good working knowledge of the various worldwide certification requirements (FAR, TC, EASA) and in particular FAR 25 and FAR Part 121.
  • Airline Dispatch and/or Airline Flight Operations experience an asset.
  • You are familiar with the basic features of many regional aircraft type.
  • Good presentation and communication skills combined with exceptional analytical capability and attention to detail.
  • Strong computing skills that include programming experience and software development, along with expert level proficiency in Excel and Powerpoint.
  • Strong written and verbal English skills; other languages are considered an asset.
  • Pilot’s license is considered an asset.

 
Job Number: 1810092773
Job Location: Nagoya,
Duration: 12 months
Input Date: 05/02/2019
Last Updated: 08/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002f54DAAQ&URLSource=cjhunter

Aircraft Painter I

Description:
PDS is seeking an RS Aircraft Painter I for an open position in Savannah, GA.

The Aircraft Painter I prepares the aircraft for paint related operations by performing tasks safely within schedule while meeting quality expectations. 


Principal Duties and Responsibilities 
  • Mask, sand, and prepare aircraft for paint application.
  • Apply glazing and sealing compounds in preparation for final painting.
  • Operate and maintain all types of preparation and priming equipment. Mix paints and primers. 
  • Perform leading edge sealant work in final detail. 5. Comply with all safety, 5S, and housekeeping policies.
  • Use personal protective equipment and ensure aircraft interior is protected (PTP). 
  • Properly care for and maintain shop equipment and tools as assigned.
  • Comply with Paint shop standard practices. 3. Perform other duties as required. 

 


 


 

Education and Experience Requirements: 
High school diploma/GED. One (1) year of painting experience.
A working knowledge of paint processes and products (lacquers, enamels, epoxies, urethanes, and acrylics).

Other Requirements:



  •  Ability to read, write, speak, and understand the English language.
  •  Ability to read and interpret blueprints and engineering documentation.
  • Able to pass Pulmonary Function Test to obtain respirator certification.
  • .Ability to use tools, equipment, and materials in the aircraft painting process.
  • Able to climb ladders and stairs, perform close tolerance work, work in small spaces lift up to 40 pounds and work any shift.
  •  Must be computer literate.






 



 


 

 
Job Number: 1910102344
Job Location: Savannah, GA
Duration: 6 months
Input Date: 05/21/2019
Last Updated: 08/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Donnell Covington
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033ha2QAA&URLSource=cjhunter

Aircraft Performance Engineer

Description:
Chipton-Ross is seeking an Aircraft Performance Engineer for an opening in Reno, NV.

The Performance Engineer will be responsible for mission performance analysis of the Client supersonic business jet to meet program and certification requirements. Successful candidates will have a commanding and fundamental understanding of the design and development of fighter and/or business jet class aircraft, preferably with experience developing supersonic vehicles. Candidates should have expert level knowledge of the necessary physics-based trades for supersonic designs and the regulatory requirements that apply to such aircraft. The ideal candidate will have demonstrated knowledge and experience in computational fluid dynamics, analytical and theoretical performance estimation techniques, wind tunnel testing from low speed to high speed regimes (preferably supersonic), propulsion integration (preferably supersonic), and stability and control.

RESPONSIBILITIES:
Perform detailed takeoff, landing and mission performance calculations for the AS2.
Evaluate various flight maneuvers for assisting development of loads, aircraft handling qualities or other development or certification requirement.
Predict aircraft performance and handling characteristics using classical analytical techniques as well as advanced simulation tools.
Assist development and enhancement of in-house performance prediction codes.
Work with aerodynamics group to collect CFD and wind tunnel data.
Collaborate with the stability and control and aircraft external loads groups.
Operate 6-DOF simulation codes.
Post-process and analyze wind tunnel and flight test data.
Assist with development of performance estimates for flight testing and certification data for the aircraft flight manual.
Assist in the development of advanced tools for performing MDO trades, aircraft sizing and performance analysis.
Provide support for engineering, certification, and flight test departments from concept to product certification.

REQUIRED EXPERIENCE:
1-5 years experience with aircraft design or performance analysis using computational tools such as vortex-lattice and area rule methods as well as traditional handbook methods. .
Experience programming in Java, Python, Matlab/Simulink and wiht writing numerical aircraft analysis codes for sizing and/or performance.
Knowledge of aircraft handling qualities and stability and control, as well as aerodynamic CFD methods and wind tunnel testing.
Familiarity with numerical optimization techniques and multi-disciplinary optimization frameworks.
Understanding of statistical methods used in quantifying uncertainties.
Experience with supersonic and/or business aircraft.
Strong technical, interpersonal, communication, administrative, and presentation skills.
Highly self-motivated with a strong bias for action, and excellent problem-solving skills across multi-disciplinary skill sets.

EDUCATION:
Accredited Bachelor's degree Mechanical or Aerospace engineering, with an advanced degree in a technical specialty relating to aircraft design highly preferred.

WORK HOURS:
Full-Time

 
Job Number: 177355
Job Location: Reno, NV
Rate: $DOE
Duration: Direct
Input Date: 03/05/2019
Last Updated: 08/20/2019
Firm Name: CHIPTON ROSS
Attention: Patrick Costello
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: pcostello@chiptonross.com
Website: www.chiptonross.com

Aircraft Plumber

Description:

PDS is seeking a Aircraft Plumber  for an open position in Savannah, GA.


Under general supervision, fabricates, troubleshoots and repairs water, oxygen, and vent systems using aircraft specifications and design/engineering drawings.
Must have 2 years experience as an Aircraft Plumber     

Essential Functions:
  1. Performs tasks layout, tube/hose fabrication and installation of parts, subassemblies and assemblies for aircraft water, drain, vent, pitot static and oxygen systems. 2. Safely operates equipment such as arbor press, flaring and de-burring machine, punch press, riveting equipment, nitrogen, water and oxygen servicing equipment, pitot static test equipment and other related testing equipment. 3. Identifies and uses common aircraft hardware, fittings and hoses in accordance with FAA requirements, Gulfstream procedures and accepted shop practices. 4. Complies with the inspection/documentation process for any components/systems fabricated, installed and tested. 5. Accomplishes all required paperwork and documentation as required by FAA requirements and Repair Station manual. 6. Complies with all safety, 5S, and housekeeping policies. Uses personal protective equipment and ensures that aircraft interior is protected (PTP).

Additional Functions:

  • Performs other duties as required.   

Education and Experience Requirements:


High school diploma/GED.
Must have two (2) years of aircraft plumbing experience or aircraft systems.

Unique Skills:

Previous Aircraft experience along with Solumina, Catia V5, and SmarTeam experience preferred.



Other Requirements:
  • Ability to read write, speak, and understand the English language.
  • Ability to read, and interpret blueprints and engineering documentation.
  • Ability to use tools and equipment associated with aircraft plumbing systems.
  • Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift.
  • Must be computer literate.

 
Job Number: 1910102013
Job Location: Savannah, GA
Duration: 6 months
Input Date: 05/06/2019
Last Updated: 08/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033gbsQAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Safety Assessment Expert - China

Description:
Our Aerospace Client based in China is looking for additional Engineering Support . They require an Aircraft Safety Assessment Expert.

This is an exciting opportunity to work in East Asia , contributing to the success of our Client's Aircraft Program. Excellent salary / remuneration for suitable skilled and qualified candidates.

Candidates should be prepared to live and work in Shanghai on a fixed term contract basis for 1-3 years.

Please quote ref: JO0004 on application.



Main Responsibilities:

Primarily work on the aircraft's safety assessment.
Take charge for PRA and CMA.


Skills/ Qualifications / Experience Sought:

Over 10 years safety assessment and certification experience.

Strong experience of Particular Risk analysis (PRA),especially
Survivability of Systems, Aft Pressure Bulkhead Rupture and Tail Strike.

Strong experience of Common Mode Analysis or certification.

Fluent English, with good communication skills.
 
Job Number: BHJOB28358_60
Job Location: China
Rate: Negotiable
Duration: 1-3 years
Start Date: 01/09/2019
Input Date: 07/04/2019
Firm Name: STRONGFIELD TECHNOLOGIES USA INC
Attention: Graham Bird
Address: 5000 BIRCH ST STE 3000
City, State: NEWPORT BEACH, CA 92660
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Sheet Metal Mechanics

Description:
STS Technical Services is Hiring Aircraft Sheet Metal Mechanics in Bloomfield, Connecticut!
Essential Functions:
Fabricate parts and perform maintenance in accordance with FAA approved technical data
Repair body or structure of aircraft according to specifications
Read work orders, blueprints, and specifications to determine repair or fabrication
Utilize metal fabrication machines such as saws, brakes, shears, and grinders
Qualifications:
Minimum 2 years experience repairing aircraft sheet metal structures
Benefits:
STS Technical Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.
We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-800-359-4787.
Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 44062
Job Location: Broomfield, CO
Input Date: 07/11/2019
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Aircraft Sheet metal Technician

Description:
Position Purpose:
The Sheet metal Technician Senior works under minimal supervision to safely lay-out, fabricate and install parts equipment and fabricated items on aircraft following established operating procedures. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations. Mentor and train other Sheetmetal Technicians.

Principle Duties and Responsibilities:
1. Use complicated schematics/blueprints, engineering drawings and technical instructions to safely perform sheet metal layout, fabrication, and installation of parts, equipment or fabricated items on aircraft. Coordinate with supervision and Inspection to ensure compliance with internal and FAA paperwork, sign-offs and quality specifications.
2. Mentor and train Sheetmetal Technicians, as required. Review their work prior to sign off to ensure work complies with quality control standards.
3. Oversee projects or other technicians and assesses requirements of assigned tasks to procure required. materials and documentation for assigned tasks.
4. Use blueprints to cut and form plastics and follow standard operating procedures when using adhesives, sealants and solvents.
5. Utilizing tools as required. to shape and form complex angles and configurations according to blueprint specifications or written/verbal information.
6. Safely operate shop equipment such as: brakes, presses, riveting equipment, shears, and hand tools associated with sheet metal functions. Use the proper hardware for various sheet metal applications.
7. Comply with all safety, 5S, and housekeeping policies. Uses personal protective equipment as required. Ensures aircraft is protected (PTP).
8. Conduct monthly 5S audits, as required.
9. Use the material tracking system to create parts demand, track squawks and to sign-off work.
10. Assist in developing initiatives to meet individual OGSM requirements, as required.
 
Education and Experience Requirements:
High School Diploma or GED required. Four (4) years of sheet metal and/or fabrication experience. Experience in aerospace industry preferred. Valid Driver’s License required.
Other Requirements:
1. Advanced knowledge of sheet metal or fabrication processes (forming, drilling, stamping, shaping, bending, punching, cutting, riveting, filing and dimpling).
2. Ability to read and interpret blueprints and engineering documentation.
3. Valid drivers license required. to operate towing and other Gulfstream transportation equipment.
4. Ability to read, write, speak, and understand proficiently the English language.
 5. Demonstrates excellent communication skills, both verbal and written.
6. Adapts to sudden schedule changes.
7. Able to use tools and equipment associated with sheet metal work.
8. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift.
9. Must have a good working knowledge of computers and experience working with MicroSoft Office suite.
10. Must be able to read, write, speak, and understand the English language.
 
 
Job Number: 1910103713
Job Location: Appleton, WI
Duration: 12 months
Input Date: 07/01/2019
Last Updated: 08/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Tyler Belisle
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GQqOQAW&URLSource=cjhunter

Aircraft Stress Engineers

Description:
Nastran, Patran a plus
 
Job Location: GA/WI
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: sclark@advancedtechno.com
Website: www.advancedtechno.com

Aircraft Structural Test Engineer / Stress Analyst

Description:
PDS Tech is seeking an experienced Aircraft Structural Test Engineer / Stress Analyst in Stratford, CT
 
The candidate will support, perform and manage analysis, research and development of structural engineering specification for ground test and qualification to include structures.  
 
The candidate must have component design, analysis and test experience of dynamic and airframe components.  They must also understand the design process, test facilities, test conduct, review / correlation of data and reporting.
 

 
Job Number: 1910099483
Job Location: Stratford, CT
Duration: 12 months
Input Date: 03/13/2019
Last Updated: 08/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002jWjAQAU&URLSource=cjhunter

Aircraft Technician II

Description:
PDS Tech is seeking an RS Acft Tech II for an open position in Brunswick, GA.

Under minimal supervision, performs inspections, maintenance, and repairs of moderate to advanced complexity on aircraft systems and structures. 

Principal Duties and Responsibilities:

Essential Functions:
1. Communicate as required to receive and understand work assignments. Perform complex aircraft inspections, repairs, and modifications with minimal supervision.
2. Coordinate with MTL, STM, and the Inspection Department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete CMP cards, work order sign-offs, and other paperwork in a timely and accurate manner. Assist as needed with shift turnovers.
3. Ensure that all work accomplished meets quality standards and specifications.
4. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely.
5. Follow standard operating procedures when operating ground support equipment (external power carts, hydraulic mules, hydraulic lift platforms, tow tugs, forklifts, compressed gas cylinders, etc.)
6. Coordinate, accomplish, and assist with aircraft movement in hangar and ramp areas.
7. Provide training to less experienced technicians.
8. Protect customer property (PTP). 

Additional Functions:
1. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered.
2. Implement and apply Lean/continuous improvement processes to all areas of responsibility.
3. Properly use and maintain Company-provided tools and equipment. Return items to designated storage area after use.
4. Comply with safety rules and procedures. Use protective equipment as required and be alert for unsafe conditions. Address unsafe conditions before putting people or property at risk.
5. Use the material tracking system to create parts demand, track squawks, and sign-offs, and to charge labor to correct work orders.
6. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
7. Perform other duties as assigned. 
 


 

Education and Experience Requirements:



  • High School Diploma or GED required. 
  • FAA Airframe and Powerplant certificate and 2 years of aviation maintenance experience or 4 years of aviation maintenance experience to include 2 years of experience working on mid/large size aircraft required.
  • Valid Driver’s License required.
  • Strong structural background preferred.



Unique Skills:



  • This is a weekend - 2nd shift position.
  • Candidates should be available for any shift.
  • Sheet metal experience is highly desired.


Other Requirements:
1. Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures.
 
Job Number: 1910104102
Job Location: Brunswick, GA
Duration: 6 months
Input Date: 07/11/2019
Last Updated: 08/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Lynn Byers
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GSadQAG&URLSource=cjhunter

Aircraft Technician II

Description:
PDS Tech is seeking an RS Acft Tech II for an open position in Brunswick, GA.

Under minimal supervision, performs inspections, maintenance, and repairs of moderate to advanced complexity on aircraft systems and structures. 

Principal Duties and Responsibilities:

Essential Functions:
1. Communicate as required to receive and understand work assignments. Perform complex aircraft inspections, repairs, and modifications with minimal supervision.
2. Coordinate with MTL, STM, and the Inspection Department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete CMP cards, work order sign-offs, and other paperwork in a timely and accurate manner. Assist as needed with shift turnovers.
3. Ensure that all work accomplished meets quality standards and specifications.
4. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely.
5. Follow standard operating procedures when operating ground support equipment (external power carts, hydraulic mules, hydraulic lift platforms, tow tugs, forklifts, compressed gas cylinders, etc.)
6. Coordinate, accomplish, and assist with aircraft movement in hangar and ramp areas.
7. Provide training to less experienced technicians.
8. Protect customer property (PTP). 

Additional Functions:
1. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered.
2. Implement and apply Lean/continuous improvement processes to all areas of responsibility.
3. Properly use and maintain Company-provided tools and equipment. Return items to designated storage area after use.
4. Comply with safety rules and procedures. Use protective equipment as required and be alert for unsafe conditions. Address unsafe conditions before putting people or property at risk.
5. Use the material tracking system to create parts demand, track squawks, and sign-offs, and to charge labor to correct work orders.
6. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
7. Perform other duties as assigned. 
 


 

Education and Experience Requirements:



  • High School Diploma or GED required. 
  • FAA Airframe and Powerplant certificate and 2 years of aviation maintenance experience or 4 years of aviation maintenance experience to include 2 years of experience working on mid/large size aircraft required.
  • Valid Driver’s License required.



Unique Skills:



  • This is a weekend - 3rd shift position.
  • Candidates should be available for any shift.
  • A&P preferred.
  • Sheet metal experience is highly desired.


Other Requirements:
1. Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures.
 
Job Number: 1910104100
Job Location: Brunswick, GA
Duration: 6 months
Input Date: 07/11/2019
Last Updated: 08/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Rodney Kinlaw
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GSaJQAW&URLSource=cjhunter

Aircraft Technician-Weekend 1st Shift

Description:
WEEKENDS 1st shift!!!! ONLY

Position Purpose:

Under minimal supervision, performs inspections, maintenance, and repairs of moderate to advanced complexity on aircraft systems and structures.

Principle Duties and Responsibilities:
1. Communicate as required. to receive and understand work assignments. Perform complex aircraft inspections, repairs, and modifications with minimal supervision.
2. Coordinate with MTL, STM, and the Inspection Department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete CMP cards, work order sign-offs, and other paperwork in a timely and accurate manner. Assist as needed with shift turnovers.
3. Ensure that all work accomplished meets quality standards and specifications.
4. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely.
5. Follow standard operating procedures when operating ground support equipment (external power carts, hydraulic mules, hydraulic lift platforms, tow tugs, forklifts, compressed gas cylinders, etc.)
6. Coordinate, accomplish, and assist with aircraft movement in hangar and ramp areas.
7. Provide training to less experienced technicians.
8. Protect customer property (PTP).
Additional Functions:
1. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered.
2. Implement and apply Lean/continuous improvement processes to all areas of responsibility.
3. Properly use and maintain Company-provided tools and equipment. Return items to designated storage area after use.
4. Comply with safety rules and procedures. Use protective equipment as required. and be alert for unsafe conditions. Address unsafe conditions before putting people or property at risk.
5. Use the material tracking system to create parts demand, track squawks, and sign-offs, and to charge labor to correct work orders.
6. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. Perform other duties as assigned.
Other Requirements:
1. Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures.
2. Must be able to read, write, speak, and understand the English language.
 
Education and Experience Requirements:
High School Diploma or GED required.
FAA Airframe and Powerplant certificate and 2 years of aviation maintenance experience or 4 years of aviation maintenance experience to include 2 years of experience working on mid/large size aircraft required.
Valid Driver’s License required.
 
 
Job Number: 1910103978
Job Location: Westfield, MA
Duration: 12 months
Input Date: 07/10/2019
Last Updated: 08/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Karen Reno
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GS2pQAG&URLSource=cjhunter

Airline Marketing Analyst

Description:
PDS Tech is seeking a top performer for a key role within the Sales & Marketing Team. You will need demonstrated business acumen, strategic thinking capabilities and possess problem solving, creative, analytical, and research skills. You are able to create engaging presentation material and express ideas and present data in a concise manner. 
 
Typical responsibilities include:
 
  • Conducting standard route performance analysis, economic analysis, traffic analysis, fleet planning, financial analysis and competitor evaluations using established processes
  • Identifying market opportunities and prepare business cases demonstrating the value of the Company’s family of aircraft
  • Developing models that accurately reflect an airline’s business environment and allowing for multiple scenarios to be evaluated
  • Developing and executing the marketing strategies for assigned accounts to support the sale of the Company’s family of aircraft
  • Providing insightful analysis, creating and delivering presentations to potential airline customers, external industry stakeholders and internal senior management
  • Taking responsibility for selected accounts and managing relationships with airline contacts
  • Managing multiple deliverables, deadlines and priorities subject to weekly review with management
  • Traveling to visit customers, usually with a team representing the Company, or independently where relationships have been established

  • Minimum Education is University degree with preference given to a Masters level
  • 2 to 4 years related aviation experience required in any combination of the following areas:
    • airline industry, aircraft operations, aircraft performance engineering, fleet planning, marketing and/or financial analysis

  • English language required, other languages are assets
  • Willing to travel on company business
  • Presentable, excellent customer interaction skills
  • Demonstrated analytical and computer skills required
  • Proficient in Microsoft Office (Word, PowerPoint, Excel)

 
Job Number: 1810092771
Job Location: Nagoya,
Duration: 12 months
Input Date: 04/24/2019
Last Updated: 08/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002f53ZAAQ&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airworthiness/Structural Engineer

Description:
*Must have active secret clearance
*Experience with Gulfstream Aircraft
*Experience Airborne Test Bed on Aircraft
*Airworthiness certification experience for FAA Part-25 (Transport) aircraft
*Quality Background

Email resume to: mmccarthy@pdstech.com
 
Job Number: Airworth-Mass
Job Location: MA
Rate: $80.00/hour
Per Diem: Possible
Overtime: Possible
Duration: Long term
Start Date: ASAP
Input Date: 07/11/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Assembler
(U.S. Citizenship Required*)
North Charleston, SC
2019-9062
Responsibilities:
• Perform routine production assembly operations on structural and mechanical assemblies, subassemblies and aircraft systems, equipment and accessories using manual operations.
• Able to select correct parts, materials, tools, assemblies, standards, hardware, etc. install, fit, fasten, align, adjust and perform the necessary pre-installation assembly work to accomplish the installation of structural components requiring the use of production and engineering prints to determine exact locations.
• Report job constraints such as: errors caused by workmanship, defects in parts, materials, assembly procedures, tools, sequences, etc., in accordance with procedures.
• Perform any repairs, rework, functional checks and the incorporation of authorized changes, etc., as outlined by Lead.
• Remove and/or replace installed components and any related parts.
• Must be able but not limited to Drill close tolerance holes in composites, Tool indexing, Gap measurement.
• Able to read and understand blueprints, drawings, schematics, engineering dispositions and instructions.
• Safety conscious; employ the use of safety glasses, safety harnesses, respirators, boot socks, and other pertinent safety equipment 100% of the time.
• Exhibit exemplary housekeeping and Foreign Object Debris (FOD) standards.
• Maintain clean, neat, organized and FOD free work area.
• Possess understanding and knowledge of basic computer systems and programs.
• Use personal protective gear for face, eyes, ears, hand, and arms as required.
• Able stand for long periods of time, and work in elevated and/or confined spaces as required.
• Frequent overhead work may be required.
• Frequent overtime may be required.
• Work up to 40 hours per week; hours will be determined based upon business needs

Qualification:
• Lift up to 25 pounds (Occasional lifting of 21-35 pounds), bend and twist at the waist, walk, crawl, crouch, stand for long periods, kneel, reach, climb/balance, flexion/extension
• Contact with sealants and solvents, exposure to noise, working on elevated platforms
• Pass visual acuity and color perception tests
• Handle, use, and dispose of hazardous material
• Obtain & maintain training certifications as required to support assignment responsibilities
• Occasional (1 to 3 hrs) finger manipulation
• On occasion, a 2-person lift may be necessary for weights greater than 50 lbs
• Frequent reaching overhead (3 to 6 hrs), frequent walking on flat surfaces, frequent standing flat or uneven surfaces, frequent balancing on a ladder, steps, or uneven surfaces, frequent exposure to noise
• Occasional climbing on 3-12 ft ladders or stands
• Occasional contact with metals, exposure to plastics and solvents to atmospheric conditions
• Candidates will be required to be available to work Mon - Sun with flexible hours based upon the factory.
• On assigned days, candidates may be assigned to work up to 12 hours per day; Must be able to work to meet business needs
• Required to have completed all contingencies to start successfully (drug test, background check, etc.) before attending assessment.
• Required to attend and pass a training classes. Failure of training may be cause for assignment termination
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Suitable candidates will have 1 year of direct Aerospace Systems Experience as a minimum requirement, and preferably have 3 years of solid Aerospace Systems Experience. Candidates without aerospace systems experience will not be considered, unless they have completed a relevant aerospace manufacturing program
• Aerospace systems experience should include hydraulic, ICS, PECS, duct installation, IFE, interior decretive repair, waste and potable water systems.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-9062
Job Location: Charleston, SC
Input Date: 07/03/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Assembler
(U.S. Citizenship Required*)
North Charleston, SC
2019-9061
Responsibilities:
• Perform routine production assembly operations on structural and mechanical assemblies, subassemblies and aircraft systems, equipment and accessories using manual operations.
• Able to select correct parts, materials, tools, assemblies, standards, hardware, etc. install, fit, fasten, align, adjust and perform the necessary pre-installation assembly work to accomplish the installation of structural components requiring the use of production and engineering prints to determine exact locations.
• Report job constraints such as: errors caused by workmanship, defects in parts, materials, assembly procedures, tools, sequences, etc., in accordance with procedures.
• Perform any repairs, rework, functional checks and the incorporation of authorized changes, etc., as outlined by Lead.
• Remove and/or replace installed components and any related parts.
• Must be able but not limited to Drill close tolerance holes in composites, Tool indexing, Gap measurement.
• Able to read and understand blueprints, drawings, schematics, engineering dispositions and instructions.
• Safety conscious; employ the use of safety glasses, safety harnesses, respirators, boot socks, and other pertinent safety equipment 100% of the time.
• Exhibit exemplary housekeeping and Foreign Object Debris (FOD) standards.
• Maintain clean, neat, organized and FOD free work area.
• Possess understanding and knowledge of basic computer systems and programs.
• Use personal protective gear for face, eyes, ears, hand, and arms as required.
• Able stand for long periods of time, and work in elevated and/or confined spaces as required.
• Frequent overhead work may be required.
• Frequent overtime may be required.
• Work up to 40 hours per week; hours will be determined based upon business needs

Qualification:
• Lift up to 25 pounds (Occasional lifting of 21-35 pounds), bend and twist at the waist, walk, crawl, crouch, stand for long periods, kneel, reach, climb/balance, flexion/extension
• Contact with sealants and solvents, exposure to noise, working on elevated platforms
• Pass visual acuity and color perception tests
• Handle, use, and dispose of hazardous material
• Obtain & maintain training certifications as required to support assignment responsibilities
• Occasional (1 to 3 hrs) finger manipulation
• On occasion, a 2-person lift may be necessary for weights greater than 50 lbs
• Frequent reaching overhead (3 to 6 hrs), frequent walking on flat surfaces, frequent standing flat or uneven surfaces, frequent balancing on a ladder, steps, or uneven surfaces, frequent exposure to noise
• Occasional climbing on 3-12 ft ladders or stands
• Occasional contact with metals, exposure to plastics and solvents to atmospheric conditions
• Candidates will be required to be available to work Mon - Sun with flexible hours based upon the factory.
• On assigned days, candidates may be assigned to work up to 12 hours per day; Must be able to work to meet business needs
• Required to have completed all contingencies to start successfully (drug test, background check, etc.) before attending assessment.
• Required to attend and pass a training classes. Failure of training may be cause for assignment termination
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Suitable candidates will have 1 year of direct Aerospace Systems Experience as a minimum requirement, and preferably have 3 years of solid Aerospace Systems Experience. Candidates without aerospace systems experience will not be considered, unless they have completed a relevant aerospace manufacturing program
• Aerospace systems experience should include hydraulic, ICS, PECS, duct installation, IFE, interior decretive repair, waste and potable water systems.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-9061
Job Location: Charleston, SC
Input Date: 07/03/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Aviation Mechanics - Clearance

Description:
Seeking Experienced Aviation Mechanics for a contract opportunity in San Antonio, Texas!

Work to be performed on a VIP aircraft, 747 platform and active Top Secret Clearance Required.
Several Openings For:
  • General Mechanic
  • Electrical
  • Structures
  • Avionics Tech
  • Quality Inspection
  • Supply Chain Specialist


Great Opportunity for Ex-military/Exiting Military/ and Veterans
Previous military experience a plus!


 
Experience performing routine maintenance, modifications, and rework on VIP - 747 aircraft.
Required- Minimum of 5 years' experience working on 747 platform.
Tools: no tools required
Location: San Antonio, Texas

***Current Security Top Secret Clearance required
US Citizenship Required: Clearance requirements will be used during resume screening. Individuals must hold a current Clearance or Equivalent Clearance/ investigation type to be considered for this position, clearance level must be noted on the resume. Must follow submittal procedures below for consideration. No phone calls please, only candidates that provide resumes with the job ID number will be contacted and considered for the opportunity.

**submittal must reference Job ID number 1710063637

Camille Zunker- czunker@pdstech.com
 
Job Number: 1710063637
Job Location: San Antonio, TX
Duration: 12 months
Input Date: 02/27/2017
Last Updated: 08/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Camille Zunker
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002GBZ0AAO&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionic Technician / no clearance SC

Description:
Work Location: Greenville, SC
Status: Open

Qty: 1
Desired Start Date: 7/8/2019
End Date: 12/20/2019

Job Description:
5 Years of C-130 Aircraft Avionics Installation Experience is required.
Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company.
Installs electrical harnesses and performs operational checks, post modification testing, troubleshoots and repairs electrical and avionics systems on aircraft. Assist flight line maintenance as required.

Must be able to read and speak English. Comprehend documents such as safety rules, operating maintenance instructions and procedure manuals.

Mission essential functions and other duties may be assigned as required.

Must have the ability to work most avionics installation tasks with minimal supervision.

Must have the ability to interpret installation drawings, install and route electrical cable assemblies, perform multiple termination processes and perform continuity checks in accordance with standard processes.

This position is the 2nd Shift - 3:30pm-1:00am

Areas of Expertise C-130 No 1 4 - 6 Years
 
Job Number: JE-1661-1
Job Location: Greenville, SC
Rate: DOE
Duration: 6 months
Start Date: 2nd Shift - 3:30pm-1:00am
Input Date: 06/17/2019
Last Updated: 07/22/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Avionics & Electrical Design Engineers

Description:
SolidWorks aircraft electrical and avionics upgrades

Immediate needs - email a resume and call our national recruiters
 
Job Location: Nationwide
Input Date: 06/12/2018
Firm Name: ADDITIONAL CONTRACT SERVICES
Address: 85 RANGEWAY RD BLDG 1 STE 2
City, State: NORTH BILLERICA, MA 01862
800 Phone: 800/661-8272
Email: acs@acsnatl.com
Website: www.acsnatl.com

Avionics Air Data System Engineer

Description:

Guides successful completion of major engineering activities related to the development and certification of the Navigation systems on the aircraft.

Essential Functions:
(1)  Provides engineering oversight and/or dispositions of the system functionality for the Production build.
(2)  Contributes to planning, coordinating and executing important engineering activities with team members, other groups within company, and suppliers
(3)  Prepares and reviews necessary documents such as, but not limited to: system level requirements, equipment specifications, source control drawings, electrical interface control documents, wiring diagrams, certification plans, Rigs, ground and flight test procedures, etc.
(4)  Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues.
(5)  Coordination with Japanese authority (JCAB) for the certification requirements pertinent to the systems.
(6)  Provides specialized technical assistance to team members.
(7)  Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities.
(8)  Is able to balance technical activities with cost and schedule.
(9)  Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives.

The primary work location will be in Nagoya, Japan. However, the job may involve international travel. Deployment for extended periods to USA to support Flight Tests may be necessary.
 


Ideal candidate should have at least 10 years’ experience on commercial or business aircraft, and be proficient on Avionics Sensors system related to the majority of the following functions:
l  Air Data Computer (ADC)
l  Pitot Static Probes (PSP)
l  Angle of Attack (AOA)
l  Total Air Temperature probes (TAT)
l  Standby Flight Instrument System (SFIS)
l  Air Data Heating System (ADSHS)

Requirements:
  • Bachelor’s degree in electrical or aerospace engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
  • Minimum of 10 years’ experience in the above listed Sensors functions.
  • Ability to work with a global team with a variety of cultures and key project stakeholders
  • Strong written and verbal communication skills. English is the official language in the work environment.
  • Attention to detail and impeccable follow through

Must be familiar with:

  • Part 25 FAA and EASA certification requirements pertinent to the Navigation system.
  • Engineering standards to design and develop aircraft level wiring diagrams
  • Aircraft troubleshooting practices during functional tests

 
Job Number: 1910103477
Job Location: Nagoya,
Duration: 24 months
Input Date: 06/13/2019
Last Updated: 08/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GQDcQAO&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
Location: Fort Worth, TX
Duration: 6 month contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)


****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****


Job Description:
- Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
- Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.
- This position is for an engineer working in the Fort Worth IFG Aircraft Computers Team.
- Job responsibilities will include supporting development of Avionics Mission Computers on aircraft.
- Must be able to work in a fast paced environment and be able to work independently with limited oversight from team lead and manager.
- Must able to travel both domestic and internationally.


Activities include:
- Electronic hardware testing and troubleshooting
- Support Software Development efforts for target hardware
- Review and improve Hardware Specifications
- Work with Suppliers & Engineering during product development lifecycle
- Support of system integration activities
- Development/review of detailed engineering documents for software and hardware release
- Financial analysis of planned team activities
- Development of estimates to complete, development of customer estimates
- Generation of slide presentations in support of customer briefings
- Support development of Supplier Statement of Work & Proposals
- Work closely with Supply Chain Management


Education:
- Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 10333
Job Location: Fort Worth, TX
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 03/19/2019
Last Updated: 07/18/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer - Clearance TX

Description:
163995
1334-1 Avionics Engineer
Work Location: Fort Worth, TX
Status: Open

Qty: 1
Desired Start Date: 2/4/2019
End Date: 9/13/2019

Job Description:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

This position is for an engineer working in the Fort Worth IFG Aircraft Computers Team. Job responsibilities will include supporting development of Avionics Mission Computers on aircraft.
Activities include:
• Electronic hardware testing and troubleshooting
• Support Software Development efforts for target hardware
• Review and improve Hardware Specifications
• Work with Suppliers & Engineering during product development lifecycle
• Support of system integration activities
• Development/review of detailed engineering documents for software and hardware release
• Financial analysis of planned team activities
• Development of estimates to complete, development of customer estimates
• Generation of a slide presentations in support of customer briefings
• Support development of Supplier Statement of Work & Proposals
• Work closely with Supply Chain Management
Must be able to work in a fast paced environment and be able to work independently with limited oversight from team lead and manager. Must able to travel both domestic and internationally.

Work Location: Fort Worth, TX
Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
Pay Rate: $62.00 Hourly
 
Job Number: JE-1334-1S
Job Location: Fort Worth, TX
Rate: 62/hr max
Per Diem: no
Duration: 7 months
Input Date: 01/28/2019
Last Updated: 07/31/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Avionics System Safety Engineer

Description:
We are currently seeking an Aviation Safety expert to fill an opening for a company in Nagoya, Japan. Interested candidates should have previous aircraft or aviation experience as well as 8 plus years of hands on system safety work.

Responsibilities of the Avionic System Safety Engineer

Creation and integration of SFHA/SSA/CMA Avionics Systems.
Technical coordination with aviation authorities including FAA, JCAB and EASA.
Technical scheduling and coordination with suppliers and internal departments.
Other activities related to Safety Assessments.



Requirements of the

4 year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation).
8 plus years of experience in Avionics System Safety.
Must have excellent written and verbal communication skills in English.
Previous aircraft or aviation experience.
 
Job Location: Japan
Duration: 2 Years
Start Date: ASAP
Input Date: 08/06/2019
Last Updated: 08/20/2019
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Email: smcglinsey@velocity-cs.com
Website: www.velocity-cs.com

Avionics System Safety Engineer

Description:

PDS Tech is seeking an Avionics System Safety Engineer.

Scope of Work


  - Creation of SFHA/SSA/CMA of Avionics Systems
  - Technical coordination with authority
  - Technical/schedule coordination with supplier
  - Technical/schedule coordination with other division in company
  - Other activities related to Safety Assessment

The primary work location will be in Nagoya, Japan. However, engineers may be requested to relocate to Seattle (Washington State, USA).
 


Job Requirements:
​(1) 8+ years of experience in Avionics System Safety
​(2) Must have excellent written and verbal communication skills in English
​(3) Previous Aircraft experience


 
 
Job Number: 1910103815
Job Location: Nagoya,
Duration: 24 months
Input Date: 07/03/2019
Last Updated: 08/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GRTOQA4&URLSource=cjhunter

Avionics Tech I

Description:
PDS Tech is seeking Avionics Tech I for open positions Savannah, GA

Assists in troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. 

Principal Duties and Responsibilities:

Essential Functions:

1. Demonstrates basic technical skills in avionics and aircraft systems operational testing and troubleshooting.
2. Under supervision, performs the installation and functional testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
3. Assists in ensuring quality and efficiency of all installations. Troubleshoots processes/concepts to provide timely, quality repairs of malfunctioning systems.
4. Acquires and demonstrates the skills and knowledge required to effectively and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring.
5. Performs and complies with engineering changes and modifications as required.
6. Assists in set up and operation of necessary test equipment; conducts functional and operational tests to evaluate performance and reliability.
7. Under supervision, ensures that all work performed on the aircraft is properly and completely documented and ready for inspection.
8. Tests and maintains test equipment, electronic systems, and components.
9. Complies with the company FOD program, tool control program, 5-S program and all safety regulations. 

Additional Functions:
1. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
2. Performs other duties as assigned.
 

Education and Experience Requirements:


High School graduate/GED. Two (2) years related work experience; or two (2) years of accredited schooling in aviation electronics. Ability to read and interpret basic blueprints and schematic diagrams.


Unique Skills:



A&P/FCC/NCATT preferred. Troubleshooting experience preferred. Must be willing to work any shift.


 
Job Number: 1910100665
Job Location: Savannah, GA
Duration: 6 months
Input Date: 04/02/2019
Last Updated: 08/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Donnell Covington
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033cefQAA&URLSource=cjhunter

Avionics Test Engineer

Description:
We are seeking a Test Conductor / Test Engineer for our Avionics System Integration Rig (ASIR). The test rig is a static test bench for all of the Avionics Systems on the aircraft with a simulation host computer to stimulate the systems.  Candidates should have experience and be familiar with how to conduct systems testing on a test bench or static simulator.

This position requires the development and test of Engineering Test Procedures (Test Cards) based on the Engineering Test Spec requirements from the Avionics Design group, and the creation of Test Reports following the tests to document the results.  Test Cards will be created using in-house developed tools however general experience with test card creation is required.  Support investigations and troubleshooting of test rig and/or systems related snags, coming from either the rig test or flight test programs.

The primary work location will be in Seattle, WA, USA. Business trips to required sites may be requested, including Nagoya and Moses Lake where engineering tasks (Nagoya) and intensive flight tests (Moses Lake) are carried out.

Scope of Work:
  • Development and test of Engineering Test Procedures (Test Cards) using in house tools.
  • Creation of Test Reports following the tests to document the results.
  • Support investigations and troubleshooting of test rig and/or systems related snags, coming from either the rig test or flight test programs.
  • Support the Configuration Management of the Test Rig
  • Facilities planning,
  • Creation and carrying out of Rig Maintenance Procedures,
  • Test Video Recording & Equipment management,
  • Software Loading following provided instructions.

 
 
Job Number: 1910097155
Job Location: Seattle, WA
Duration: 12 months
Input Date: 01/14/2019
Last Updated: 08/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002r7MpQAI&URLSource=cjhunter

Avionics and Electrical Systems- UM

Description:
PDS Tech Inc is seeking a  Avionic and Electrical Systems - UM in Wichita, KS

JOB RESPONSIBILITIES:

This role will gain valuable engineering experience in the area of design requirements including capture, design, validation, troubleshooting, and certification of aircraft avionic and electrical systems. Working with managers and key players in Engineering, Candidates will assist in the development and evaluation of crucial systems on Textron Aviation Products. Prepare engineering drawings for avionics and electrical system interface wiring using computer based drafting tools (CATIA/CCD and/or IAI HarnesSys). Utilize electronic test equipment to verify avionics and electrical systems meet design requirements, and/or for system troubleshooting in the lab and on aircraft. Prepare engineering trade studies, functional test procedures, certification plans, ground and flight test plans, certification reports, and other engineering documents. Write technical descriptions of subject matter pertinent to design or test requirements. Includes descriptions of supplier parts, test or rigging specifications, etc. Assist with the evaluation and analysis of avionics and electrical system design for completion of function hazard assessments and system safety assessments.


 
 



 
Job Responsibilities:
• DER/UM-related duties missing; ensuring that the proposed design is certifiable, coordinating with the FAA, resolution of certification issues, determination of the certification basis, writing the certification plan, witnessing certification testing, find compliance.
• Responsible for successful integration and certification of vendor equipment into Cessna Citation aircraft. Assists in preparation of reports, engineering drawings, reports and other documents. Coordinates with direct and indirect customers and suppliers to determine system requirements and resolve problems.
• Responsible for completing complex development, design, testing and certification assignments for new design or modifications. Develops creative, scientific alternatives during course of job assignments to reach desired outcome.
• Conducts research, calculations, estimates and drafting of projects to conform with established specifications such as capacities, styling, performance and determine status of work in progress. Performs above work utilizing frequent application of in-depth engineering principles.
• Maintain a high degree of proficiency in computer applications to accomplish tasks.
• Consults and coordinates with other engineering and manufacturing personnel to coordinate design function and resolve technical problems. Consults with supplier to discuss and remedy issues in a timelier and efficient manner.
• Requests and coordinates work performed by Engineering support groups, Experimental, Manufacturing and Supply Chain Management for the project. Instructs suppliers as to materials, equipment and hardware for utilization on aircraft in accordance with approved specifications.
• Maintains contact with Product Support Engineering and production departments to resolve engineering problems impeding production and to assist in the incorporation of new design concepts and changes.
• Monitors and conducts analyses on first article fabrication and operation to assure adequacy of design.
• Reviews and evaluates supplier proposals for potential utilization on future models.
• Provides guidance to engineers and report writers in the solution of specific, complex design problems, which must be resolved during development and testing.
• Assures supervision awareness of program status, problems and successes. Provides periodic design reviews and update presentations to management of engineering and other company organizationsand tools.

 
Education and Experience:
• B.S. or advanced degree in Aeronautical, Mechanical, or Electrical Engineering, Physics, Math, Statistics or related technical degree required
• Minimum 7 years of experience in General Aviation or Business Aircraft development programs

• Avionics and Electrical System DER qualifications (FAR 23 or 25).
• Experience with domestic and foreign business and/or general aviation aircraft certification process is required
• Some experience in system assessment using modeling tools such as Failure Modes and Effect Analysis (FMEA), (Failure Modes and Effect Criticality Analysis (FMECA), Reliability Block Diagram (RBD), and Fault Trees Analysis (FTA) is desired.
• Experience with Microsoft Office software application and working environment is required.
• The candidate must be able to work in a team environment and be able to clearly communicate thoughts and ideas with peers, management, and certification authorities.

 
 
Job Number: 1910097710
Job Location: Wichita, KS
Duration: 6 months
Input Date: 03/14/2019
Last Updated: 08/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Marjorie Santiago-Marquez
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002r9TlQAI&URLSource=cjhunter

Avionics/Elec Tech II

Description:
PDS Tech is seeking a Avionics/Electrical Tech II for an open position in Savannah, GA.

Provides technical expertise in testing aircraft systems, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. May fill in for the Senior Avionics/Electrical Technician thus ensuring that the company goals of safety and quality are enforced at all times while adhering to daily work plans to maintain schedule requirements. 

Principal Duties and Responsibilities:

Essential Functions:

  • Demonstrates technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting.
  • Performs the installation and functionally testing of electrical/avionics components and systems on aircraft per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
  • Ensures quality and efficiency of all installations: troubleshoots processes/concepts to provide timely, quality repairs of malfunctioning systems.
  • Demonstrates the skills and knowledge required to effectively and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring.
  • Performs and complies with engineering changes and modifications as required.
  • Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability.
  • Ensures that all work performed on the aircraft is properly and completely documented and ready for inspection.
  • Tests and maintains test equipment, electronic systems, and components.
  • Complies with the company FOD program, tool control program, 5-S program and all safety regulations.
  • Adapt to sudden schedule changes. 

Additional Functions:

  • In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
  • Performs other duties as assigned. 


 


 

Education and Experience Requirements:



  • High School graduate/GED.
  • A & P license, FCC license or NCATT certification preferred.
  • Four (4) years experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and two (2) years related experience.

Other Requirements:

  • Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs.
  • Ability to read and interpret basic blueprints and schematic diagrams.
  • Demonstrates excellent communication skills. Must be able to communicate effectively both verbally and written.
  • Must be able to climb stairs and ladders, work in confined areas and lift up to 50 pounds.



 

  


 


 
Job Number: 1910102788
Job Location: Savannah, GA
Duration: 6 months
Input Date: 07/04/2019
Last Updated: 08/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Rodney Kinlaw
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033jFeQAI&URLSource=cjhunter

Avionics/Electrical Tech Sr

Description:

PDS is seeking an Avionics/Electrical Tech Sr. for an open position in Savannah, GA



Position Purpose:
Provides leadership, technical expertise and guidance while performing various operational, functional tests and repairs of avionics/electronic, aircraft equipment and systems to ensure a defect free aircraft. Provides superior technical expertise in testing, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise and leadership by defining and implementing process changes to reduce cost and meet schedule without compromising Safety or Quality. Demonstrates the knowledge and leadership skills required to fill in for the team leader thus ensuring that the company goals of Safety and Quality are enforced all times while adhering to daily work plans to maintain schedule requirements. 

Principal Duties and Responsibilities:



  •  Demonstrates superior technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting. Provides direct training to personnel to support company cross-training goals while ensuring a safety conscience, quality oriented, skilled workforce.
  • Teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
  • Ensures quality and efficiency of all installations: troubleshoots and teaches troubleshooting processes/concepts to provide timely, quality repairs of malfunctioning systems.
  • Demonstrates the skills and knowledge required to effective and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring.
  • Oversees the performance and compliance with engineering changes and modifications as required.
  • Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability.
  • Demonstrates through diligent compliance the importance of daily logs and other paperwork. Ensures that all work performed on the aircraft is properly and completely documented
  • As required, pre-inspects work of others prior to submitting to inspection for approval to reduce rework and inspection time.
  • Provides the knowledge and technical expertise in testing and maintaining test equipment and electronic systems and components as required.
  • Enforces the company FOD program, tool control program, 5-S program and all safety regulations.
  • Maintains required logs and records.
  • Adapts to sudden schedule changes.
  • Coordinates with other disciplines concerning projects. 



Additional Functions:



  • Where required, teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
  • Self inspection capability for all avionics testing functions in applicable areas.
  • In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
     


 


Education and Experience Requirements:
High School Diploma or GED required. Six (6) years experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and four (4) years related experience. A&P (FAA Airframe and Powerplant) license preferred. Other FCC License preferred. Other NCATT preferred. 


Other Requirements:

  • Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs.
  • APU run qualification and engine run qualification preferred.
  • Ability to read and interpret basic blueprints and schematic diagrams.

 

Unique Skills:



G650 experience preferred.



 


 

 
Job Number: 1910101665
Job Location: Savannah, GA
Duration: 6 months
Input Date: 04/30/2019
Last Updated: 08/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Donnell Covington
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033fd0QAA&URLSource=cjhunter

Avionics/Electrical Tech Sr

Description:

PDS is seeking an Avionics/Electrical Tech Sr. for an open position in Savannah, GA



Position Purpose:
Provides leadership, technical expertise and guidance while performing various operational, functional tests and repairs of avionics/electronic, aircraft equipment and systems to ensure a defect free aircraft. Provides superior technical expertise in testing, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise and leadership by defining and implementing process changes to reduce cost and meet schedule without compromising Safety or Quality. Demonstrates the knowledge and leadership skills required to fill in for the team leader thus ensuring that the company goals of Safety and Quality are enforced all times while adhering to daily work plans to maintain schedule requirements. 

Principal Duties and Responsibilities:



  •  Demonstrates superior technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting. Provides direct training to personnel to support company cross-training goals while ensuring a safety conscience, quality oriented, skilled workforce.
  • Teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
  • Ensures quality and efficiency of all installations: troubleshoots and teaches troubleshooting processes/concepts to provide timely, quality repairs of malfunctioning systems.
  • Demonstrates the skills and knowledge required to effective and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring.
  • Oversees the performance and compliance with engineering changes and modifications as required.
  • Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability.
  • Demonstrates through diligent compliance the importance of daily logs and other paperwork. Ensures that all work performed on the aircraft is properly and completely documented
  • As required, pre-inspects work of others prior to submitting to inspection for approval to reduce rework and inspection time.
  • Provides the knowledge and technical expertise in testing and maintaining test equipment and electronic systems and components as required.
  • Enforces the company FOD program, tool control program, 5-S program and all safety regulations.
  • Maintains required logs and records.
  • Adapts to sudden schedule changes.
  • Coordinates with other disciplines concerning projects. 



Additional Functions:



  • Where required, teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
  • Self inspection capability for all avionics testing functions in applicable areas.
  • In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
     


 


Education and Experience Requirements:
High School Diploma or GED required. Six (6) years experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and four (4) years related experience. A&P (FAA Airframe and Powerplant) license preferred. Other FCC License preferred. Other NCATT preferred. 


Other Requirements:

  • Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs.
  • APU run qualification and engine run qualification preferred.
  • Ability to read and interpret basic blueprints and schematic diagrams.


Unique Skills:
Catia V5 and Solumina preferred not required

 
 


 

 
Job Number: 1910101165
Job Location: Savannah, GA
Duration: 6 months
Input Date: 04/16/2019
Last Updated: 08/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Rodney Kinlaw
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033e0iQAA&URLSource=cjhunter

Avionics/Electrical Tech Sr

Description:

PDS is seeking an Avionics/Electrical Tech Sr. for an open position in Savannah, GA



Position Purpose:
Provides leadership, technical expertise and guidance while performing various operational, functional tests and repairs of avionics/electronic, aircraft equipment and systems to ensure a defect free aircraft. Provides superior technical expertise in testing, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise and leadership by defining and implementing process changes to reduce cost and meet schedule without compromising Safety or Quality. Demonstrates the knowledge and leadership skills required to fill in for the team leader thus ensuring that the company goals of Safety and Quality are enforced all times while adhering to daily work plans to maintain schedule requirements. 

Principal Duties and Responsibilities:



  •  Demonstrates superior technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting. Provides direct training to personnel to support company cross-training goals while ensuring a safety conscience, quality oriented, skilled workforce.
  • Teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
  • Ensures quality and efficiency of all installations: troubleshoots and teaches troubleshooting processes/concepts to provide timely, quality repairs of malfunctioning systems.
  • Demonstrates the skills and knowledge required to effective and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring.
  • Oversees the performance and compliance with engineering changes and modifications as required.
  • Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability.
  • Demonstrates through diligent compliance the importance of daily logs and other paperwork. Ensures that all work performed on the aircraft is properly and completely documented
  • As required, pre-inspects work of others prior to submitting to inspection for approval to reduce rework and inspection time.
  • Provides the knowledge and technical expertise in testing and maintaining test equipment and electronic systems and components as required.
  • Enforces the company FOD program, tool control program, 5-S program and all safety regulations.
  • Maintains required logs and records.
  • Adapts to sudden schedule changes.
  • Coordinates with other disciplines concerning projects. 



Additional Functions:



  • Where required, teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
  • Self inspection capability for all avionics testing functions in applicable areas.
  • In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
     


 


Education and Experience Requirements:
High School Diploma or GED required. Six (6) years experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and four (4) years related experience. A&P (FAA Airframe and Powerplant) license preferred. Other FCC License preferred. Other NCATT preferred. 


Other Requirements:

  • Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs.
  • APU run qualification and engine run qualification preferred.
  • Ability to read and interpret basic blueprints and schematic diagrams.


Unique Skills:
Catia V5 and Solumina preferred not required

 
 


 

 
Job Number: 1910101164
Job Location: Savannah, GA
Duration: 6 months
Input Date: 04/16/2019
Last Updated: 08/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Donnell Covington
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033e0dQAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics/Electrical Systems Engineer

Description:
Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Duration: Long Term Contract
Shift: First
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****

Required Skills:
1. Strong technical skills aircraft Avionics/Electrical Systems
2. The ability to effectively work with and support a multi-discipline team of engineers, technicians, Program managers, upper management etc...
3. Strong verbal and written communication skills.
4. Due to the nature of the work candidates must be US Citizen

Education:
1. Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. See Other Requirements in Job Description.
3. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
4. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Preferred Skills:
1. Practical hands on aircraft experience and problem solving supporting a production/service environment during aircraft build and Flight Testing
2. Familiarity with Airworthiness Authority regulations and showing compliance to such regulations
 
Job Number: 10662
Job Location: Savannah, GA
Rate: $58.00 -$63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 03/22/2019
Last Updated: 07/18/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Bleed Air Designer

Description:
The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
1. Prepare 3D layout models of the BAS and VCS.
2. Prepare 3D installation and detail models of the BAS and VCS.
3. Prepare 2D installation, assembly and detail drawings of the BAS and VCS.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program
2. Minimum 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.

Knowledge, Skills and Abilities:
1. Experience using CATIA V5 to prepare 3D parametric models and 2D drawings. Minimum of 10,000 hours.
2. Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
3. Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS.
 
Job Number: 28-037
Job Location: Greensboro, NC
Rate: Up to $75/hr, DOE
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 07/02/2019
Last Updated: 07/22/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

ECS or Bleed Air Systems Design Engineer

Description:
General Summary:
The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
1. Prepare 3D layout models of the BAS and VCS.
2. Prepare 3D installation and detail models of the BAS and VCS.
3. Prepare 2D installation, assembly and detail drawings of the BAS and VCS.
4. Work in a team environment supporting liaison engineering to research root cause and address production discrepancies.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program with 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.

Knowledge, Skills and Abilities:
1. Experience using CATIA V5 to prepare 3D parametric models and 2D drawings. Minimum of 10,000 hours.
2. Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
3. Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS.




The Structures Company is an AA/EOE.
 
Job Number: 301
Job Location: NC
Rate: $55-$60/Hr - **DOE**
Per Diem: Yes
Overtime: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 07/24/2019
Last Updated: 08/20/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

C++ Real Time Software Engineers

Description:
Software Engineers
Positions can be located at multiple sites:
Oklahoma City, OK 73145 / 73150 / 73135
El Segundo, CA 90245

Secret, TOP Secret AND non-cleared positions, at various skill levels

Tasks may include:
  • Lead, Develop and Maintain Code and integrate software components into a fully functional software system.
  • Develop, document, and maintain architectures, requirements, algorithms, interfaces and designs for software systems.
  • Requirements analysis, design, development, test, documentation, licensing, troubleshooting, and user support; custom operating system development; tool design and maintenance; research and development projects; trade studies; risk assessments; and support to software testing.
  • Execution of systems and software testing to verify operational and functional requirements. Assists with test procedures and documenting test results to ensure software system requirements are met.
  • Support software project management and software supplier management functions.
  • Select, tailor and deploy processes and tools; establish metrics.
  • Design, develop, implement, test and document software for surveillance aircraft platforms that enable air superiority by detecting, identifying, and tracking airborne threats and providing operators intuitive battle management controls.
  • Serve as a subject matter expert for software domains, system-specific issues, processes and regulations.
  • Positions include Leads as well as team members in the avionics software organization working closely with other software engineers, systems engineers, other disciplines, customers, suppliers and field service representatives.

 Bachelor's degree in an engineering classification.
 
Experience with any of the following:
  • C, C++, C#, Java, ADA, DXL, Chef, Puppet, Ansible
  • Java Script, Python, shell, Perl Scripting languages
  • Rhapsody, Rational, TFS, ClearCase, ClearQuest, Team Concert, Jenkins, Coverity, Eclipse
  • Real Time, Embedded, ROTS, Doors, Agile
  • Unix, Linux Windows
     

Contact Elisabeth Laspe at 314-482-3991 or elaspe@pdstech.com to discuss these opportunities.
 
Job Number: 1810088612
Job Location: Lexington Park, MD
Duration: 12 months
Input Date: 09/11/2018
Last Updated: 08/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Elisabeth Laspe
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mcb7AAA&URLSource=cjhunter

C++ Real Time Software Engineers

Description:
Software Engineers
Positions can be located at multiple sites:
Oklahoma City, OK 73145 / 73150 / 73135
El Segundo, CA 90245

Secret, TOP Secret AND non-cleared positions, at various skill levels

Tasks may include:
  • Lead, Develop and Maintain Code and integrate software components into a fully functional software system.
  • Develop, document, and maintain architectures, requirements, algorithms, interfaces and designs for software systems.
  • Requirements analysis, design, development, test, documentation, licensing, troubleshooting, and user support; custom operating system development; tool design and maintenance; research and development projects; trade studies; risk assessments; and support to software testing.
  • Execution of systems and software testing to verify operational and functional requirements. Assists with test procedures and documenting test results to ensure software system requirements are met.
  • Support software project management and software supplier management functions.
  • Select, tailor and deploy processes and tools; establish metrics.
  • Design, develop, implement, test and document software for surveillance aircraft platforms that enable air superiority by detecting, identifying, and tracking airborne threats and providing operators intuitive battle management controls.
  • Serve as a subject matter expert for software domains, system-specific issues, processes and regulations.
  • Positions include Leads as well as team members in the avionics software organization working closely with other software engineers, systems engineers, other disciplines, customers, suppliers and field service representatives.

 Bachelor's degree in an engineering classification.
 
Experience with any of the following:
  • C, C++, C#, Java, ADA, DXL, Chef, Puppet, Ansible
  • Java Script, Python, shell, Perl Scripting languages
  • Rhapsody, Rational, TFS, ClearCase, ClearQuest, Team Concert, Jenkins, Coverity, Eclipse
  • Real Time, Embedded, ROTS, Doors, Agile
  • Unix, Linux Windows
     

Contact Elisabeth Laspe at 314-482-3991 or elaspe@pdstech.com to discuss these opportunities.
 
Job Number: 1810088609
Job Location: Palmdale, CA
Duration: 12 months
Input Date: 07/18/2018
Last Updated: 08/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Elisabeth Laspe
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mcanAAA&URLSource=cjhunter

CNC Machine Operator - CA

Description:
Chipton Ross is seeking a CNC machine Operator for an opening in Santa Maria, CA

Responsibilities
Operates computer numerical controlled (CNC) machines such as: milling machines, lathes, turning centers and horizontal mills used for the construction of aircraft interior structural and non structural parts. Aircraft interior parts are cut based on engineering drawings and include floor fittings, aluminum trims, counter tops and other various aluminum, stainless steel and phenolic parts
" Supervises and leads the operation of CNC machines in coordination with the production schedule and at the direction of the CNC Manager.
" Adheres to company and customer specifications, work instructions, engineering prints and work orders.
" Documents the materials and processes used in the process to maintain traceability of product.
" Loads programs into CNC machine and executes program cutting of the material.
" Cuts raw stock according to the necessary size for the part being machined.
" Secures and fixtures raw stock of material into machine, squares material prior to running program if necessary, and monitors the operating of the machine to ensure proper program performance.
" Deburs completed machine parts as time allows.
" Provides feedback to supervisor and programmer as to the performance of the program and tooling used for cutting the material.
" Verifies the accuracy of the parts using calipers, micrometers and other metrology equipment as a periphery inspection.
" Ensures machine and area around machine is kept as clean as practical.
" Operates CNC machine in a safe manner.
" Properly maintains coolant, including removal of containments, proper dilution ratio and cleaning.

Requirements
High school diploma or GED required
3-5 years of experience
Familiarity of the basic operation of CNC machine and the understanding of G and M code is preferred or the ability to learn is mandatory.
Other Skills: Ability to read engineering blue prints is desirable.

Preferred
Degree or diploma from technical/vocational school in CNC machining is strongly desired and most preferred.

Work Schedule
2nd Shift, M-F 4pm - 12:30am

 
Job Number: 175942
Job Location: Santa Maria, CA
Rate: Up to $19.00 DOE
Duration: Temp to Hire
Input Date: 12/19/2018
Last Updated: 08/20/2019
Firm Name: CHIPTON ROSS
Attention: Emmanuel Morgan
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: emorgan@chiptonross.com
Website: www.chiptonross.com

Cabinet Finisher II

Description:
PDS is seeking a Cabinet Finisher II  for an open position in Savannah, GA.

Under general supervision, prepares and applies finishes to aircraft furniture using aircraft specifications, designs and engineering drawings with a high level of safety, quality, detail and productivity. Assists team members with greater experience to enhance techniques supportive of quality workmanship. 

Principal Duties and Responsibilities: 

Essential Functions: 1. Works under general supervision to prepare furniture for finish and disassembly using blueprints, aircraft specifications and design/engineering drawings. 2. Performs high quality repairs to various finished surfaces in the shop and aboard aircraft. Cleans and polishes blemishes as needed to prepare the aircraft for delivery. Applies finish to furniture using spray equipment and other manual/mechanical methods. 3. Uses various types of sandpapers, polishes, adhesives, masking mediums, solvents, finish materials, hand tools and various power tools to disassemble and finish furniture. 4. Complies with all safety, 5S, and housekeeping policies. Uses personal protective equipment to protect aircraft interior (PTP). 5. Uses the material tracking system to create parts demand, track squawks and to sign-off work. 

Additional Functions: 1. Works with lead and higher skilled technicians to develop and implement process improvements that increase safety, reduce, cost, cycle time, and man-hours using Lean Six-Sigma and other process improvement techniques. 2. Performs other duties as required. 

Please contact our Altanta or Savannah offices:  Atlanta@pdstech.com Office: 877-272-0088 and SavannahBranch@pdstech.com Office: 912-480-4706
 

Education and Experience Requirements:

High school diploma/GED. Two (2) years experience in wood finishing. Experience in aerospace industry preferred. Basic knowledge of cabinet finishing processes and products.

 



Unique Skills:



Knowledge of Solumina preferred but not required.

Other Requirements: 1. Possess a working knowledge of inspection and process specifications. 2. The ability to read, write, speak, and understand the English language. 3. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. 4. Must be computer literate.


 
Job Number: 1810082578
Job Location: Savannah, GA
Duration: 6 months
Input Date: 04/25/2018
Last Updated: 08/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Rodney Kinlaw
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002e0N6AAI&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Materials Quality & Airworthiness Expert

Description:
Composite Materials Quality & Airworthiness Expert.

Our Aerospace Client based in China is seeking an expert to assist them with their programs.

Role:

Be responsible for the confirmation of airworthiness factors of composite materials, based on the requirement of airworthiness, improve the existing development path map of composite structure parts, carding the relationship among structure verification, process identification and major milestones.

Responsible for engineering management of airworthiness, improving conformity verification process and establish the system for it.

Responsible for Continuous Airworthiness verification of composite materials, planning and renovate conformity verification specifications, establishing a sustainable operation system for airworthiness.

In charge of establishing the system of composite process identification, renovate the flow and requirements of process capability appraisal, pre-production of manufacturing(PPM), pre-production of verification(PPV), first piece qualification(FPQ).

Be responsible for identifying the key parameters in manufacturing and assembly process of composite structural parts, and establish the evaluation process and system for key parameters.

Responsible for establishing methods and means of critical process control.

Assist in the construction of talent team for composite material airworthiness .

Skills, qualifications and experience desired:

Bachelor degree or above, with more than 10yrs relevant technical working experience.

Experience in Aircraft manufacturing preferred.

Proficient in the technology of airworthiness certification, process identification, process control, and familiar with AS9100 quality system.

Candidates with experience in verification of composite structure as aircraft manufacturer, or used to be in charge of process appraisal of composite parts, or experienced in process control and supplier quality control.

Excellent writing capability (project proposal, reviewed report etc.)

Overseas working experience is preferred.

Candidates should be prepared to live and work in China for several years. Please quote ref: JO0000000261 on application.
 
Job Number: BHJOB28358_3
Job Location: China
Rate: Negotiable
Duration: 1-3 years
Start Date: 01/07/19
Input Date: 07/10/2019
Firm Name: STRONGFIELD TECHNOLOGIES USA INC
Attention: Graham Bird
Address: 5000 BIRCH ST STE 3000
City, State: NEWPORT BEACH, CA 92660
Website: www.strongfield.com

Composite Structural Design Engineer Openings

Description:
Design and configuration of composite primary aircraft structure.
Experience during preliminary/conceptual design phase required.
Support of subsystems integration and packaging into primary structure.
Strong knowledge and understanding of latest structural design, as well as manufacturing trends in the Aerospace industry.
Analyze the applicability of new and emerging technologies and advanced techniques.
Serve as a design focal between the program and Tier 1 suppliers.
Provide technical support in design and development of the preliminary structures layout that meets weight, cost, manufacture-ability and certification requirements.
Support new business development, trade studies and proposal activities.
Support technical review of supplier capabilities and progress.

Requirements:
Must be a US or Canadian citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772.
Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure / confidentiality agreement with current or any former employer that would prevent you from fully performing the duties of the position.
Must have a bachelor’s degree in Aerospace or Mechanical Engineering, or similarly related area.
8+ years of experience in performing design of large aerospace structures.
Strong composite structural design background.
Proficiency with CATIA V5 and Teamcenter PLM is preferred.
Knowledge of the conceptual and preliminary design phases of aircraft development is strongly preferred.
Thorough understanding of the structural design requirements for Part 25 certification is preferred.
Highly self-motivated with a strong bias for action, and excellent problem-solving skills across multi-disciplinary skill sets.

The Structures Company, LLC is an AA/EOE.
 
Job Location: Reno, NV
Rate: Open
Per Diem: Yes
Overtime: Possible
Duration: Long-term
Start Date: ASAP
Input Date: 07/17/2019
Last Updated: 08/20/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: chrissheets@thestructurescompany.com
Website: www.thestructurescompany.com

Composite Technician

Description:
Job Description
Come work for a great company with great benefits! We need guys for all shifts (weekends, nights, days, holidays). Six to eight-month contract with the potential of converting to a permanent employee. Aerospace experience preferred.
Composites fabrication & sub-assembly:
• Fabrication of parts using wet layup and pre-impregnated composite materials
• Knowledge of properly preparing tooling for layup (Clean, seal, release)
• Placement and consolidation of composite materials in tooling
• Grinding, cutting, and trimming of parts
• Working knowledge of composite specific equipment including ovens, Gerber cutting machines, and Virtek laser computers.
• Bonding composite structures
• Hand-finishing parts to proper fitment
• Wet layup with multiple resin systems and fabrics
• Locating parts and creating fixtures to blueprints and / or engineering instructions
• Attention to detail and ability to self-inspect work to ensure quality defects are mitigated
Required:
• 3+ years of experience with composites or aircraft fabrication and assembly preferred.
• Flexible to work overtime/modified/Non-standard shifts preferred
• 5S/FOD/Tool control programs mandatory
• Ability to perform repairs on composite structures
• Experienced with quality inspection points and process documentation.
• Knowledge of resins, mixing, ratios, and paste mixes.
Physical Requirements
• Must be able to stand for extended periods – 8 hours min.
• Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces.
• Physically able to handle items weighing up to 40lbs (unassisted).
• Working in confined spaces
• Working on Elevated Platforms
Job Type: Full-time
Salary: $16.00 to $35.00 /hour
 
Job Location: Mojave, CA
Rate: 16-30
Per Diem: Yes
Overtime: Possible
Start Date: ASAP
Input Date: 08/20/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: tara.gilbert@thestructurescompany.com
Website: www.thestructurescompany.com

Continued Airworthiness Group Lead

Description:
We are seeking a seasoned engineering leader with certification experience to fill an opening with a company in Nagoya, Japan. Interested candidates should have 10 plus years of airworthiness or certification experience as well as prior management experience.

Responsibilities of the Continued Airworthiness Group Leader
Develop and manage the group in support of all airworthiness policies including the creation and negotiation of all Instructions for Continued Airworthiness.
Manage the development and execution of any training required to establish the needed level of competence to ensure airworthiness.
Interface with customer services in the development of policy for continued operational safety processes and certification procedures for design change including service bulletins and risk assessments.
Ensure proper execution of a continuous operational safety program in accordance with FAR 21.3 and JCAB Circular 1-003 Section 8.
Promote a strong relationships with JCAB and FCAA personnel.
Ensure completion of compliance activities and regulatory interface and provide feedback on process improvement.
Establish and manage the necessary KPI to drive team performance.


Requirements of the Continued Airworthiness Group Leader

10 plus years of experience in certification and/or airworthiness related work.
Strong knowledge of continued operational safety and the aircraft certification processes with one or more major regulators or OEMs.
Prior management experience including hiring and budget management.
Fluent in English, Japanese language proficiency is not required, but is beneficial.
Ability to clearly explain policy in front of company management and government officials.
 
Job Location: Japan
Duration: 2 Years
Start Date: ASAP
Input Date: 08/20/2019
Last Updated: 08/20/2019
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Email: mcalderon@velocity-cs.com
Website: www.velocity-cs.com

Control System Engineer

Description:

Legacy Engineering, a division of PDS Tech, is seeking a Control System Engineer - Fire Protection System for the Regional Jet Program.



The primary work location will be in Nagoya, Japan. However, Engineers may be requested to relocate to Seattle or Moses Lake (Washington State, USA) where aircraft flight testing is performed.



The Control System Engineer will work as an Electrical Design Specialist for ATA 26-10 (Fire & Smoke Detection) and ATA 26-20 (Fire extinguishing). This includes all FPS system design aspects and interfaces within the FPS team and all other engineering teams; as well as interfacing with the FPS component suppliers in order to achieve the correctness and completeness necessary for FPS certification in the regional jet program.  



  • Basic work scope is to provide technical assistance to the development and certification of the regional jet program, focusing primarily on FPS performance assessment and optimization.
  • This activity includes:
    1. Prepare and review wiring diagram, electrical interface documents, Perform tests and troubleshooting in the RIG / Aircraft
    2. Support electrical qualification discussions for FPS components.
    3. Have the necessary technical background and competence in the system design as defined in this SOW scope.
    4. As required, conduct interface meetings with the FPS component suppliers.
    5. Prepare FPS design requirement documents, test specifications of type certification tests, test plans and test procedures,
    6. Coordinate with internal members, suppliers and authorities towards executing type certification tests.
    7. Prepare analysis documents, test compliance plans of analysis, and execute tests.
    8. Review supplier TSO and create TSO report
    9. Interface with the flight test team in Nagoya and the Seattle Engineering Office including Moses Lake to follow the FPS system tests conducted. Responsibilities include participating with the FPS team to prepare and/or review responses to flight test problem reports, review of test data and ground and flight test plans and test reports.
    10. Responsible for real-time telemetry monitoring during ground and flight tests, data analysis and documentation.
    11. Perform or assist with inspections and on-aircraft troubleshooting.
    12. Assist with identifying problems, adjusting and repairing systems during the troubleshooting process according to specifications, technical drawings, manuals and established procedures.
    13. Lead resolution of design challenges and any issues relate to aircraft certification.
    14. Act as an interface for the identified FPS ATA with the involved design specialists, FPS system supplier and subcontractors, in particular with the Interior Group.
    15. Be fully involved in supporting the Design Change process and activity.
    16. Perform other related tasks as assigned by the Team Leader.

  • Be prepared to work as a team member in a multi-cultural and international working environment at the Headquarter based in Japan. 
  • The engineer must be able to utilize interpersonal and communication techniques, working in a team environment as well as identifying potential issues with the ability to plan and implement short and long term goals in aircraft development.

  • Work Experience and Skillset:
    1. Each Engineer is mandated to meet the schedule by resolving problems and mitigating risk. Coordinate Interaction with other stakeholders (etc. PMO, SCM, and other engineering teams)
    2. All tasks required to perform above activities are considered within work scope; initiating/ reviewing related documents, discussion with relevant parties.
    3. Over 5 years experienced for designated design area.


 
Job Number: 1810094281
Job Location: Nagoya,
Duration: 18 months
Input Date: 10/16/2018
Last Updated: 08/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002qwKRQAY&URLSource=cjhunter

Customer Service Engineer for LG and Hydraulic Power

Description:
We are seeking a Hydraulic Engineer with exceptional communication skills to fill an opening with a company in Nagoya, Japan. Interested candidates should have experience with engineering support of an airline maintenance operation as well as strong customer service skills.

Responsibilities of the Customer Service Engineer for LG and Hydraulic Power

Respond to Airlines routine questions with the support of Design Office in reiteration to landing gear and hydraulic systems.
Organize and manage meetings with suppliers to request design changes once required and establish strategy for retrofits.
Act as lead in reporting on events involved with the Continued Airworthiness when an event or an issue may pose a concern to the safety of operations.
Ensure correct flow of information to operators when required. This may include coordination for delivering of Service Bulletin or Airworthiness Directives.

Requirements of the Customer Service Engineer for LG and Hydraulic Power

Experience related to aircraft maintenance support especially with airline operations.
Experience with aircraft maintenance training, aircraft maintenance certifications are a bonus.
Business level English skills.
 
Job Location: Japan
Duration: 2 Years
Start Date: ASAP
Input Date: 08/06/2019
Last Updated: 08/20/2019
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Email: smcglinsey@velocity-cs.com
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Data Integrity Checker

Description:
Location: Savannah, GA
Rate: $53.00/HR
Duration: Long Term Contract

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
- Check 2D and 3D engineering data and 3D models for conformance to company requirements as directed.
- Check parts for fit, form and function to the extent that information is available.
- Must have experience in Product Lifecycle Management (PLM) processes and tools, including checking CATIA V5, SmarTeam, as well as other CAD datasets, in accordance to company requirements as directed.

Checkers are responsible for determining the acceptability of data in the following areas:
- Accuracy and completeness of engineering product definition data, including CAD and PDM data.
- Proper application and compliance with all Engineering and customer drawing requirements.
- Use and understanding of GD & T a must.
- Dimensioning and tolerancing including familiarity with ASME Y14.5.
- Application of best drafting and design practices and procedures.
- Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
- Advise Design personnel regarding company drawing and design practices and procedures.
- Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
- Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
- Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
- Knowledge of company parts list & PdocM, a plus.

Essential Duties and Responsibilities
- Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems.
- Ensures designs meet customer criteria, quality standards and FAA requirements.
- Adheres to budget and project schedules.
- Provides design guidance and feedback to other engineering personnel.
- Other duties as assigned.
- Knowledge of industry design and documentation standards.
- Experience with mechanical assemblies and manufacturing technique design.
- Ability to work independently and cross-functionally.
- Experience in communicating with employees/teams in productive and efficient manner.
- Strong communication and problem-solving skills.

Education and Experience Requirements:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principal Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 10373
Job Location: Savannah, GA
Rate: $53.00/HR
Per Diem: Split Possible
Duration: LT
Input Date: 03/19/2019
Last Updated: 07/18/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Definition and Analysis Engineer - Civil Aircraft Operation Scenario

Description:
Our Aerospace Client based in China is looking for additional Engineering Support . They require a Definition and Analysis Engineer for Civil Aircraft Operation Scenario.

This is an exciting opportunity to work in East Asia , contributing to the success of our Client's Aircraft Program. Excellent salary / remuneration for suitable skilled and qualified candidates.

Candidates should be prepared to live and work in Shanghai on a fixed term contract basis for 1-3 years.

Please quote ref: JO0001 on application.



Responsibilities:


Define the method and process for aircraft operation scenario definition.
Define the civil aircraft operation scenario database.
Define the method and process for function analysis based on scenario.
Make the best practise for function analysis based on scenario.
Train other engineers in Civil Aircraft Operation Scenario definition and analysis.


Skills/ Qualifications / Experience Sought:

Bachelor and above.
10 years experience for aircraft and system design.
10 years experience for civil aircraft operation or research.
System Engineering background and especially for function analysis.
Be familiar with SysML language.
Fluent English with good communication skills.
 
Job Number: BHJOB28358_63
Job Location: China
Rate: Negotiable
Duration: 1-3 years
Start Date: 01/09/2019
Input Date: 07/10/2019
Firm Name: STRONGFIELD TECHNOLOGIES USA INC
Attention: Graham Bird
Address: 5000 BIRCH ST STE 3000
City, State: NEWPORT BEACH, CA 92660
Website: www.strongfield.com

Design Checker

Description:
Check 2D and 3D engineering data and 3D models for conformance to requirements as directed. Check parts for fit, form and function to the extent that information is available. Must have experience in Product Lifecycle Management (PLM) processes and tools, including checking CATIA v5, SmarTeam, as well as other CAD datasets, in accordance to Gulfstream requirements as directed.

Checkers are responsible for determining the acceptability of data in the following areas:
• Accuracy and completeness of engineering product definition data, including CAD and PDM data.
• Proper application and compliance with all Engineering and customer drawing requirements.
• Use and understanding of GD & T a must.
• Dimensioning and tolerancing including familiarity with ASME Y14.5.
• Application of best drafting and design practices and procedures.
• Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
• Advise Design personnel regarding GAC drawing and design practices and procedures.
• Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
• Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
• Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
 
Job Number: 24-319
Job Location: Savannah, GA
Rate: $53/hr
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 08/06/2019
Last Updated: 08/08/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

Design Engineer ( Clearfield, Utah ) S9271212

Description:
Design Engineer ( Clearfield, Utah ) S9271212
12 month Contract

Pay Rate:$70-80/hr W2

Active Secret Clearance Required

Composite Structural Design Engineer experienced in designing composite structures and assemblies for military and/or commercial aircraft with assembly level design including establishment of data schemes and tolerance analysis.

Experience is design of laminates, sandwich structures, and bonded and bolted assemblies

Top three skills:
Must have an active clearance with an investigation within the last 4.5 years
BS in Engineering with a minimum of 10 years related experience in design engineering function
Minimum of 6 years of experience with Siemens NX or Catia V5 for component and assembly design
 
Job Number: S9271212
Job Location: Clearfield, UT
Rate: Open
Per Diem: no
Overtime: yes
Duration: 12 months
Start Date: ASAP
Input Date: 07/28/2019
Last Updated: 08/15/2019
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Email: timmahaney@talentproconsulting.com
Website: www.talentproconsulting.com

Design and Analysis Engineer 3

Description:
PDS Tech, Inc. is seeking a Design and Analysis Engineer in Hazelwood, MO.

Summary:

  • Works with customers to develop and document complex electronic and electrical system requirements.
  • Analyzes and translates requirements into system, hardware and software designs and interface specifications.
  • Tests and validates to ensure system designs meet operational and functional requirements.
  • Monitors supplier performance to ensure system integration and compliance with requirements.
  • Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle.
  • Researches specific technology advances for potential application to company business needs.
  • This Diagnostic Modeler position requires an engineer capable of performing analysis of reliability, maintainability, and system health of aircraft subsystems.
  • Ability to analyze complex electrical and mechanical subsystems is essential.
  • You will evaluate failure mode effects and criticality analysis (FMECA) data from subsystem suppliers to create fault trees and model the fault behavior using MATLAB and Simulink.
  • You will work with the latest generations of aircraft platforms (both commercial and military).
  • You should have a working knowledge of Fault Detection, Fault Isolation, False Alarm Mitigation, and No Fault Found (Can Not Duplicate).
  • You will develop diagnostic models from schematics, FMECAs, and other available supplier documentation.
  • The chosen candidate will translate these models to a Times Failure Propagation Graph (TFPG) model via scripts.
  • The chosen candidate will also translate the information from the diagnostic models to MATLAB\SIMLINK models via scripts.
  • The chosen candidate will work with a real-time software development team to create the Real Time Maintenance Computing (RTMC) application or other fault diagnostic reasoning engines.

Prerequisites:
  • Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
  • ABET is the preferred, although not required, accreditation standard.
     

 
Job Number: 1910103194
Job Location: Hazelwood, MO
Duration: 12 months
Input Date: 06/14/2019
Last Updated: 08/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033kExQAI&URLSource=cjhunter

Design and Analysis Engineer 3

Description:
Chipton-Ross is seeking 3 Design and Analysis Engineer 3's for openings in Hazelwood, MO.

RESPONSIBILITIES:
Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

This Diagnostic Modeler position requires an engineer capable of performing analysis of reliability, maintainability, and system health of aircraft subsystems. Ability to analyze complex electrical and mechanical subsystems is essential. You will evaluate failure mode effects and criticality analysis (FMECA) data from subsystem suppliers to create fault trees and model the fault behavior using MATLAB and Simulink. You will work with the latest generations of aircraft platforms (both commercial and military).

You should have a working knowledge of Fault Detection, Fault Isolation, False Alarm Mitigation, and No Fault Found (Can Not Duplicate). You will develop diagnostic models from schematics, FMECAs, and other available supplier documentation. The chosen candidate will translate these models to a Times Failure Propagation Graph (TFPG) model via scripts. The chosen candidate will also translate the information from the diagnostic models to MATLAB\SIMLINK models via scripts. The chosen candidate will work with a real-time software development team to create the Real Time Maintenance Computing (RTMC) application or other fault diagnostic reasoning engines.

EDUCATION:
Accredited Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

TRAVEL: YES - 10%

FULL TIME/FIRST SHIFT
WORK HOURS: 8:00 AM - 4:30 PM
 
Job Number: 179848
Job Location: Hazelwood, MO
Rate: $DOE
Duration: 12 Months
Input Date: 06/12/2019
Last Updated: 08/20/2019
Firm Name: CHIPTON ROSS
Attention: Kevin Suk
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: ksuk@chiptonross.com
Website: www.chiptonross.com

Designer, Bleed Air Systems/Vapor Cycle Systems

Description:
PDS Tech is currently recruiting for a Bleed Air Systems Engineer in Greensboro, NC.

General Summary: 

The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.
 
Duties and Responsibilities:

  • Prepare 3D layout models of the BAS and VCS.
  • Prepare 3D installation and detail models of the BAS and VCS.
  • Prepare 2D installation, assembly and detail drawings of the BAS and VCS.
  • Work in a team environment supporting liaison engineering to research root cause and address production discrepancies.

Education, Work Experience, Certification and/or Licensure:



  • Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program with 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.

 
Knowledge, Skills and Abilities:


  • Experience using CATIA V5 to prepare 3D parametric models and 2D drawings.  Minimum of 10,000 hours.
  • Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
  • Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS.

 
Job Number: 1910096770
Job Location: Greensboro, NC
Duration: 12 months
Input Date: 04/09/2019
Last Updated: 08/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Thomas Levitt
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002r6AwQAI&URLSource=cjhunter

Director, Training & Flight Operations

Description:
Legacy Engineering, a division of PDS Tech, is seeking candidates for Director, Training & Flight Operations, Customer Support Division for the Regional Jet Development Program. 
This position is located in Nagoya, Japan.  

In this role, you will be responsible for the development and delivery of Regional Jet Customer training, flight manuals and flight operations engineering support. 



  • Training services include the development of courseware, training devices, training manuals and delivery of initial and recurrent training for Pilots, Technical/Mechanics, Cabin Crews, Ground Servicing Crews, and Dispatchers within an airline. In addition, this person must manage the relationship and performance of CAE, the Company's selected training service provider. 
  • Development, verification/validation and certification of flight operations manuals
  • Flight Operations Engineering support to Company's customers


Responsibilities include establishing deliverable commitments, establishing work priorities, creating and managing the development process, creating the team and team structure, implementing governance and communication processes, and evaluating the performance of the group.


Work Location
The Primary Work Location will be Nagoya, Japan.  Travel to USA or other country will be required.

Scope of Work
Specific Training responsibilities include:

  • Overall management of the relationship with and performance of CAE, Company’s training services provider, ensuring training devices and services are high quality at market prices
  • Development and maintenance of training curriculum and courseware for pilots, technicians/mechanics, flight attendants, and flight planning engineers, and ground handling services
  • Development and maintenance of training documentation for each course offered
  • Ensure there are sufficient qualified training instructors located at training delivery sites for the life of the aircraft
  • Ensure training devices (e.g., Full Flight Simulators (FFS), Integrated Procedures Trainers (IPT), Virtual Maintenance Trainers (VMT), Computer Based Training (CBT), Door Trainer and Cabin Trainers) & training facilities meet training objectives and are certified (where applicable) by regulators
  • Obtain regulator certifications such as OSD, FSB, etc.
  • Commitment of training services (both proforma and for fee) to customers as part of the airplane sales process
  • Scheduling customer training at a location that minimizes customer travel costs, meets customer requirements for timing (schedule), and fits within the Company's Training Program strategy.

 
Specific Flight Operations Support responsibilities include:

  • Define the process interfaces with Flight Test organization, Pilot organization and Flight operation engineering organization. 
  • Development, verification/validation, maintenance and delivery of all technical and administrative documents in support of customer’s flight operations.
    • Airplane Flight Manual (AFM)
    • Flight Crew Operating Manual (FCOM)
    • Quick Reference Handbook (QRH)
    • Weight & Balance Manual (WBM)
    • Master Minimum Equipment List (MMEL)
    • Dispatch Deviation Guide (DDG)
    • Flight Crew Training Manual (FCTM)
    • Cabin Crew Operating Manual (CCOM)
    • Aircraft Characteristics for Airport Planning (AC)



  • Ensure documents meet industry standards for content and format by participating in and influencing industry standards board that define flight operations documentation requirements
  • Create airplane performance databases and may provide specialized training courses to customers to assist them in their understanding and use of the airplane and documents listed above.  Such courses may include:
    • Performance Engineers course
    • Weight & Balance course

  • Review and approve requests from airlines for non-normal operations such as flight with missing secondary structure
  • Respond to Flight Operations related Customer Service Requests.  Utilize the Safety Process for emergent Flight Operations related Safety issues.
  • Prepare and Release Flight Operations Bulletins.  MITAC must define both a Routine bulletin type as well as an Alert bulletin type to correspond to the Maintenance related Service Bulletins
  • Define a change process that addresses Flight Operations related changes that may impact the certification basis of the airplane (e.g. Airplane Flight Manual)

Expected Education/Experience and Skills:



  1. Qualified candidates must hold an engineering degree from an accredited Engineering School.
  2. Candidates must have worked in commercial aerospace for an Original Equipment Manufacturer (OEM), and have 5 or more years in managerial positions providing Training and/or Flight Operations management functions to commercial airline customers.
  3. Commercial pilots license preferred.
  4. Candidates must have skills and experience managing Partners and Suppliers.

 
Job Number: 1710068573
Job Location: Nagoya,
Duration: 36 months
Input Date: 09/21/2018
Last Updated: 08/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002JqSMAA0&URLSource=cjhunter

DrivMatic Operator

Description:
Drivmatic, Riveting, Assembly, Manual

RESPONSIBILITIES:
" Performs a variety of DrivMatic, riveting and structural assembly operations
" Performs structural assembly, riveting and inspection operations of major components and assemblies
" Approves and stamps acceptable assemblies that meet specifications and reject assemblies that do not meet requirements
" Assures quality conformance to company/customer requirements and specifications. Responsible for assuring final quality acceptance of installations, configuration and operational response of mechanical systems, structures, components and controls.
" Adheres to all applicable safety and operational procedures and directives
" Brings to the attention of supervision/lead, and documents all malfunctions, defects and damages of equipment, material and product
" Keeps work areas clean and orderly
" May be required to perform other duties as needed

REQUIRED EXPERIENCE:
" Minimum of 5 years of experience in aircraft sheet metal and/or equivalent structural assembly
" Understands engineering drawings, blueprints, quality procedures and instructions, operation sheet, procedures, work sheets and verbal instructions
" Structural assembly, riveting and inspection operations of major components preferred
" Previous experience operating numerical control (NC) Drivmatic Riveting Machines, manual riveting machines or with robotics preferred

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
Full-Time


 
Job Number: 179646
Job Location: Stuart, FL
Rate: $20 to $25.00 DOE
Duration: 6+ Months
Input Date: 06/03/2019
Last Updated: 08/20/2019
Firm Name: CHIPTON ROSS
Attention: Kristie Hardage
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: knguyen@chiptonross.com
Website: www.chiptonross.com

ECS & Cooling Systems Engineer - Technical Specialist II

Description:
Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Company products and services

Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
Unique Skills:
Candidate should have experience with: - Aircraft environmental control systems - Specialized onboard equipment cooling systems, including - Liquid cooling systems - Air cycle systems - Vapor cycle systems - Cooling system performance analysis - Heat exchanger design and analysis - Component qualification, certification test - System test and certification - Part 25 and DO-160 - Supplier coordination

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
 
Job Number: 373838
Job Location: Savannah, GA
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 01/30/2019
Last Updated: 08/20/2019
Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

ECS System Engineer - UM

Description:
PDS Tech Inc is seeking a ECS System Engineer - UM in Wichita, KS

Job Responsibilities:
 JOB RESPONSIBILITIES:
• Authoring System Safety Reports including Aircraft and System Functional Hazard Assessments, Common Mode Analysis, and Zonal Safety Analysis.
• Assisting authors with Preliminary System Safety Assessments, and System Safety Assessments. This includes supporting FMEA, fault tree analysis, qualitative and quantitative analysis, etc.
• Provide support for ODA Unit Member making findings of compliance for the FAA in the above areas or make finding of compliance as an ODA Unit Member.
• Assist systems design and engineering teams in ensuring all aspects of 23/25.1309 compliance are addressed including reviewing certification plans and supporting reports.

EDUCATION / EXPERIENCE:
• B.S. or advanced degree in Aeronautical, Mechanical, or Electrical Engineering, Physics, Math, Statistics or related technical degree required
• Minimum 7 years of experience in General Aviation or Business Aircraft development programs



 
 



 
JOB QUALIFICATIONS:
• Experience in System Safety/Reliability and/or aircraft mechanical, avionics or electrical systems design and/or certification is desired.
• Experience with domestic and foreign aircraft certification process is desired.
• Knowledge of the safety assessment processes outlined in AC 23.1309-1D SAE ARP 4761/4754A and the draft version of AC 25.1309 is desired.
• A working knowledge of DO-178 & DO-254 is desired.
• Experience in system assessment using modeling tools such as Failure Modes and Effect Analysis (FMEA), (Failure Modes and Effect Criticality Analysis (FMECA), Reliability Block Diagram (RBD), and Fault Trees Analysis (FTA) is desired.
• Ability to use Reliability Workbench (Fault Tree+) is desired.
• Experience with fault tree modeling tools such as Fault Tree+, Relex, and CAFTA is desired.
• Experience with Microsoft Office software application and working environment is required.
• The candidate must be able to work in a team environment and be able to clearly communicate thoughts and ideas with peers, management, and certification authorities

 
Job Number: 1910097709
Job Location: Wichita, KS
Duration: 12 months
Input Date: 01/24/2019
Last Updated: 08/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Marjorie Santiago-Marquez
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002r9TgQAI&URLSource=cjhunter

EWIS Expert

Description:
Legacy Engineering, a division of PDS Tech, is seeking candidates for EWIS Expert for the Regional Jet Development Program. 
This position is located in Nagoya, Japan.  

As a global engineering expert in aircraft Electrical Wiring Interconnection Systems, you will coordinate with contracted suppliers, interface with all other aircraft functions and engineering teams to coordinate and obtain the approval of any task assigned contributing to the aircraft System development and Certification;
 
Scope of Work:
         Work as Global engineering expert as part of the EWIS team
         Basic work scope is to participate in the development and finalization of the aircraft T/C design, compliant to all applicable requirements.
         This activity includes:



  • Evaluating the current aircraft design, with respect to compliance to the EWIS related airworthiness regulations of JCAB, FAA and EASA,
  • Coordinate activities related to defining the ESSDs required to generate wiring diagrams
  • Support verification and showing-compliance activities, such as Ground and Flight Tests, Design Reviews, Inspections, Analysis, etc.
  • Coordinating integration of design change activities originated from EWIS requirements when required, run unit base and manage aircraft level changes for EWIS group
  • Responsible for tasks required to perform above activities are considered within work scope; initiating/ reviewing related documents, technical calculation, interface discussions with the team members and all the other stakeholders including systems, structures, manufacturing, customer support, and partners.
  • Coaching and Education of company members about professional knowledge in the EWIS domain.
  • Interface with other suppliers as appropriate.
  • Provide technical expertise and assist in resolving the EWIS issues during any rig testing or flight testing.
     


 



 
Job Number: 1710075244
Job Location: Nagoya,
Duration: 12 months
Input Date: 03/16/2018
Last Updated: 08/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000023L1VAAU&URLSource=cjhunter

Ejection Seat Test Engineer

Description:
PDS Tech is seeking an Ejection Seat Test Engineer in CO Springs, CO.
 
We are looking for a highly motivated individual to join our expanding Ejection Seat Design team located on the front range of the Rocky Mountains in beautiful Colorado.  The Ejection Seat Design team is a dream position for an Engineer wanting work with very challenging requirements, state of the art technologies, advanced materials, cartridges, rockets, computer-controlled devices, subsonic & supersonic aerodynamics, parachutes, aircrew equipment including advanced helmet mounted displays, and the appreciation for saving an aircrew life every few months.
 
The Ejection Seat Test Engineer will support the analysis and testing of ACES ejection seat components and subsystems.  The position will provide engineering deliverables through qualification testing and the initial production implementation.  The individual will propose new technology, create innovative design solutions, support design reviews, work directly with customers, drawing release/review and support testing of the product.




 
Responsibilities:
  • Test Leader for small & medium (<$500K/yr) projects or potentially be the Lead Test Engineer for a subsystem design effort for large ejection seat program project.
  • Successfully executes on test tasks required to develop and qualify aircraft ejection seats.
  • Utilize NX 8.5 CAD and Team Center Product Lifecycle Management (PLM) software to evaluate 3D design models and to facilitate the drafting department in producing drawings
  • Review work submitted from the Global Engineering Center-India (GEC-I) and coordinate with appropriate Engineering Resources.
  • Work as part of a cohesive engineering team and with the Integrated Product Development Team (IPDT) to test various aircraft seating products.
  • Work as part of a cohesive test team testing ejection seats with state-of-the-art anthropometric manikins at ejection velocities from zero airspeed to beyond the speed of sound (800+ MPH groundspeed)
  • Review requirements and evaluate new product test and functionality in support of meeting customer requirements and successful qualification efforts.
  • Facilitate and execute necessary testing to ensure product safety.
  • Interact with Program Management to ensure customer satisfaction.
  • Assist Engineering Management to coordinate the timely delivery of product test and customer proposal requests.
  • Conceptualize and prepare preliminary and final detail test documentation for systems, components, and assemblies.
  • May occasionally design test fixtures, tooling, and aircraft fuselage mounts and undercarriages to mount to our test facility track.
  • Adhere to all rules and codes of conduct.
  • Perform other duties as required.

Skills Required:

  • Ability to visualize, test and evaluate cutting edge mechanical structure, mechanisms, cartridge actuated devices, parachutes, head/neck protection devices, arm restraint devices, leg restraint devices, torso restraint devices, survival equipment, etc. to enable safe ejection that meets the very stringent department of defense expectations for ejection seat performance.
  • Detail oriented and thorough in all assigned tasks
  • Innovative and driven to complete all assigned tasks to the project schedule.
  • Strong customer skills and customer focus (both internal and external customers)
  • Strong analytical skills including strong knowledge of physics, dynamics, and statics.
  • Ability to work independently or as part of an integrated product team.
  • Ability to multi-task with strong organizational skills and prioritize both daily issues and long-term projects.
  • 100% dedicated to following all safety procedures and precautions.
  • Excellent interpersonal skills.
  • Excellent written and verbal communication skills
  • Ability to present test solutions
  • Excellent computer skills, including skill in Microsoft Office applications and the ability to independently learn new software.

Education:

  • Bachelors.

 
Job Number: 1910101206
Job Location: CO Springs, CO
Duration: 12 months
Input Date: 04/17/2019
Last Updated: 08/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033e6CQAQ&URLSource=cjhunter

Electrical Avionics Technician

Description:
Chipton-Ross is seeking an Electrical/Avionic Technician for an opportunity in Edwards AFB, CA

RESPONSIBILITIES:
Services, repairs, and overhauls F-22 aircraft electrical systems to ensure airworthiness. Repairs, replaces, and rebuilds aircraft electrical systems. Incorporate engineering changes. Replaces and repairs worn or damaged components. Adjusts, repairs, and replaces electrical wiring system and aircraft accessories.

Work typically requires a detailed understanding of the interrelationships of circuits. Perform such tasks as making circuit analyzes, and tracing relationships in signal flow. Use complex test instruments such as high frequency pulse generators, frequency synthesizers, distortion analyzers, and complex computer control equipment. Work may be reviewed by supervisor for general compliance with accepted practices, may provide technical guidance.

Read and interpret engineering drawings, technical manuals, repair manuals, understanding symbols, flags, and general notes - Identify aircraft locations by station, butt-line, and waterline as shown on engineering documentation and technical orders

Regularly required to perform repetitive movements, work overhead, use hands to grasp, handle, and/or feel, reach with hands and arms, talk, and hear. The employee is frequently required to stand, walk, stoop, kneel, squat, crawl, and twist.
Work in a safe and efficient manner while maintaining a clean, FOD-free work area.

PHYSICAL REQUIREMENTS:
In order to perform the essential functions of this job, the employee is regularly required to stand, use hands to grasp, handle, and/or feel and reach with hands and arms. The employee is frequently required to walk, climb, balance, stoop, kneel, squat, twist, work overhead, perform repetitive movements, and talk and hear. The employee must regularly lift and/or push or pull up to 20 pounds and frequently lift and/or push or pull up to 50 pounds. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and ability to adjust focus.

REQUIRED EXPERIENCE:
Candidate must have a minimum of 8 years' experience in fighter aircraft electrical maintenance
Knowledgeable of Tool Control, FOD, Supply, HAZMAT, Training, Quality, and Security programs.
F-22 Electrical/Avionic system experience is preferred
F-22 Low Observable materials application (Desired not required)

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
Full-Time/First Shift

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 177948
Job Location: Edwards AFB, CA
Rate: $DOE
Duration: 11 months
Input Date: 03/15/2019
Last Updated: 08/20/2019
Firm Name: CHIPTON ROSS
Attention: Melody Mullins
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: mmullins@chiptonross.com
Website: www.chiptonross.com

Electrical Engineer

Description:
1) AutoCad required, Catia V5 and CHS preferred. 2) GV,GVI, electrical system design experience preferred. 3) 14 CFR 25 Subpart H - EWIS experience preferred 4) Part 25 Certification Experience for Cabin Interiors preferred 5) Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems. 6) Experience with power distribution, lighting, switching, sizing and routing. 7) Familiarity in mechanical system design 8) Familiarity with aircraft STC procedures preferred. 9) Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Principle Duties and Responsibilities:

Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred
The level of technical skill and abilities appropriate for this grade will be established by each discipline


The Structures Company is an AA/EOE.
 
Job Number: 318
Job Location: GA
Rate: $55-$63/Hr. DOE
Per Diem: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 07/31/2019
Last Updated: 08/20/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

Electrical Engineer

Description:
Electrical Engineer

Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Duration: Long Term Contract
Shift: 4x10
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
1. AutoCad required, Catia V5 and CHS preferred.
2. GV, GVI, electrical system design experience preferred.
3. 14 CFR 25 Subpart H - EWIS experience preferred
4. Part 25 Certification Experience for Cabin Interiors preferred
5. Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
6. Experience with power distribution, lighting, switching, sizing and routing.
7. Familiarity in mechanical system design
8. Familiarity with aircraft STC procedures preferred.
9. Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required

Education and Experience Requirements:
1. Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
1. Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

Principle Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
2. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 11060
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 06/10/2019
Last Updated: 08/20/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Location: Savannah, GA
Rate: $55.00 - $58.00/HR
Duration: Long Term Contract
Shift: 4x10
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
1. AutoCad required, Catia V5 and CHS preferred.
2. GV, GVI, electrical system design experience preferred.
3. 14 CFR 25 Subpart H - EWIS experience preferred
4. Part 25 Certification Experience for Cabin Interiors preferred
5. Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
6. Experience with power distribution, lighting, switching, sizing and routing.
7. Familiarity in mechanical system design
8. Familiarity with aircraft STC procedures preferred.
9. Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required

Education and Experience Requirements:
1. Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Five (5) yrs in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
1. Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services.

Principle Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
3. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering related field preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 11061
Job Location: Savannah, GA
Rate: $55.00 - $58.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 06/10/2019
Last Updated: 07/29/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Electrical Engineer

Description:
Location: Palmdale, CA
Rate: $70.00 - $120.00/HR
Duration: 5 month contract
Shift: 1st Shift
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

Job Description:
- Designs and tests Electrical system, components, equipment, and networks for Military air vehicle.
- The applicant must have extensive experience in Wiring Harness Design, Build, and Test.
- Considered a Subject Matter Expert (SME) in the area of Harness Design and Build.
- Experience with System Integration of Hardware in a simulation test environment is desired.
- Able to evaluate electrical wiring and harness assembly diagram for build and integration.
- Candidate will be part of a team effort to develop wiring from design to installation, to include interfacing between Electrical Wiring Design and Production/Manufacturing to ensure wiring requirements flow from design to installation are processed in accordance to Company Specifications.
- Make real-time design modification to resolve issues, and update design documents to reflect changes.
-Able to work in a Shop (Prototype) environment and with interacting with technicians.

Duties include:
- Creating wiring diagrams and harness assembly diagrams
- Resolving wiring/integration related issues between the various avionics/electrical systems
- Validating/interpreting/troubleshooting/resolving any wiring related issues
- Performing technical checks to ensure wiring document correctness
- Providing engineering sign-off on all new/revised manufacturing wiring documents
- Termination Aids (TAs) and Wire Harness Master (WHM) sketches

Education:
- Level 3: BS + 9-15 years exp. or MS + 7-13 years exp.
- Experience with Design, Implementation and Test experience with aircraft harnesses required.
 
Job Number: 10234
Job Location: Palmdale, CA
Rate: $70.00 - $120.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 5 mos
Input Date: 04/22/2019
Last Updated: 08/20/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Electrical Engineer (2) - SC

Description:
Chipton-Ross is seeking 2 Electrical Engineers located in Greenville, SC

RESPONSIBILITIES:
looking to fill an Electrical Engineer position within the Design & Integration skill set to support an Avionics Upgrade (CNS/ATM) project.
The ideal candidate will be responsible for providing electrical engineering avionics designs in support of CNS/ATM upgrade on a C-130H aircraft. This includes development/design of block diagrams, wiring diagrams, and cable assemblies for avionics system installations.

REQUIRED EXPERIENCE:
Experience developing ground and flight test procedures and assisting the production team as required during installation and test is also required.
"Must be experienced with Engineering design software for electrical design.
"Ability to understand schematics, generate interconnect diagrams and troubleshoot equipment installations
"Experience with aircraft architectures and electrical integration of avionics subsystems

EDUCATION:
Accredited Bachelor's Degree in Electrical Engineering or equivalent design experience with at least 10 years of electrical design.

WORK HOURS:
Full-Time/First Shift 0630-1600

 
Job Number: 176357
Job Location: Greenville, SC
Rate: $DOE
Duration: 12 MONTHS
Input Date: 04/04/2019
Last Updated: 08/20/2019
Firm Name: CHIPTON ROSS
Attention: Patrick Costello
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: pcostello@chiptonross.com
Website: www.chiptonross.com

Electrical Engineer

Description:
Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
Unique Skills:
1) AutoCad required, Catia V5 and CHS preferred.
2) GV,GVI, electrical system design experience preferred.
3) 14 CFR 25 Subpart H - EWIS experience preferred
4) Part 25 Certification Experience for Cabin Interiors preferred
5) Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
6) Experience with power distribution, lighting, switching, sizing and routing.
7) Familiarity in mechanical system design
8) Familiarity with aircraft STC procedures preferred.
9) Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
 
Job Number: 374101
Job Location: Savannah, GA
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 06/06/2019
Last Updated: 08/20/2019
Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@cts