Job Search Results

729 listings were found that matched your search words: Keywords: Software ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2020/08/08 Saturday 10:34PM Pacific Time by ContractJobHunter. )

Listings 1 - 729

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2555 - MANUFACTURING ENGINEER - cv word doc only - On Hold

Description:
Establish and maintain manufacturing technical sequences (Precedence).

Analyze cycle times .

Establish critical cycle time.

Define and Produce the optimal line balancing for specific rate.

Establish the detailed manpower requirement (workcenters, crew type, shift,..).

Determine Production capacity (Manpower, equipment).

Produce daily production schedule (Chart).

Collect, document and maintain manufacturing data. (loads, capacity, equipment, footprint ...).

Participate in analyzing and establishing the production standard time.

Establish detailed value stream mapping.

Establish and organize workcenter considering human and material flow. .

Manage production changes (sequence).

Identify and participate in Improvement projects.

Bachelor Degree or relevant experience in Industrial Engineering.Administration, Operations Management.

Must have organization skills, rigor and autonomy.

Have strong logical and mechanical aptitude.

Are a teamworker.

Demonstrate leadership and love challenges.

Have a great sense of initiative.

Are flexible in terms of working hours.

Have a very good knowledge of Excel and MS Project software.

Patience, perseverance and curiosity.

Experience in aerospace or cabinet manufacturing industry is an asset.
 
Job Number: 2555
Job Location: Montreal, Canada
Rate: 48.00
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 07/05/2019
Last Updated: 08/08/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Admin Functional Support 3 CA

Description:
Admin Functional Support 3 (Job Number: 19016859)

Number of Openings: 1

Location(s): United States-California-Azusa


Shift: 1st Shift

Target Start Date: Jun 24, 2019

Target End Date: Dec 20, 2019

Pay Rate: $28 to $30/hr (based on experience)

Work Schedule: 9/80

Duration of Assignment: Approx 6 months


Performs variety of activities in support of program/business/technical unit. Gathers, collects, records, tracks and verifies data and information from multiple sources. Provides support to ensure customer requests are processed and closed on prior to customer visits. Uses software for functional area, to compile and generate reports, statistics, timelines, tables, graphs, correspondence and presentations. Must be familiar with Concur in support of program teams travel activities. Maintains calendars for multiple conference rooms and facilitates the execution of weekly customer meetings/teleconferences. Provides data and information to others on program/functional unit processes and procedures.


Basic Qualifications:

High School diploma plus 4 years of administrative duties experience.
 
Job Number: JK-1775
Job Location: Azusa, CA
Rate: 30/hr max
Per Diem: no
Duration: 6 months
Input Date: 06/12/2019
Last Updated: 07/08/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Administrative Assistant VA

Description:
164990
Job Title: Administrative Assistant

Work Site Address: Blacksburg, VA 24060
Job Number: 6043
Max Pay Rate: 16.00
Start Date: ASAP
End Date: 6-12 Months
Position Type: Contract

Job Summary:
Looking for a Part-time Administrative Assistance for our Quality Department. This position will assist in quality data entry, creating reports, and supporting other quality functions as needed. We are looking for a person with good interpersonal skills who works well on a team.

Proficiency using Microsoft Windows and Office Software (Word, Excel, Power Point, Outlook)
•Assembles and compiles data
•Organized
•Works with minimal Supervision

Qualifications and Education Requirements
• Associates Degree
• Bachelors Degree preferred (any discipline, but prefer HR)
 
Job Number: MB-6043
Job Location: Blacksburg, VA
Rate: 16/hr max
Per Diem: no
Duration: 12 months (part time)
Start Date: Part-time
Input Date: 05/23/2019
Last Updated: 06/24/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerodynamics Engineer

Description:
Seeking an experienced cross-disciplinary engineer with experiences in aerodynamics, computational fluid dynamics, stability and control, loads, and thermal analysis. The candidate will build on an intimate knowledge of all aircraft systems and have the ability to support current programs and extend our tools to conduct trade studies for new project initiatives.

Responsibilities:
• Support pre-flight preparation including review of test limitations, flight test plans and procedures, flight readiness reviews, mission control room support, and post flight analysis
• Works with other engineering groups to ensure proper application of design and P&HQ requirements
• Supports entry into commercial service by ensuring that regulatory and internal company requirements related to P&HQ are met
• Develop standardized analysis and reporting tools
• Perform model updates from data collected during vehicle or component testing and data created with analytical tools
• Develop and maintain aerodynamic databases for use in analysis during all flight phases
• Develop and substantiate rational P&HQ criteria and requirements for unique vehicles with unconventional configurations
• Air Data Experience
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Anticipates and resolves issues by developing standards and guidelines for diverse engineering activities
• Ability to problem solve with a balance of technical product, cost, and schedule
• Determines technical objectives of assignments and makes decisions and recommendations that are recognized as authoritative
• Maintains current knowledge of developments in the field of specialty and/or other related spacecraft innovations to improve quality and effectiveness of product



Qualifications:
Professional Requirements
• Graduate degree in Aerospace Engineering, and/or equivalent, with minimum of 8 years of experience in aerodynamics development
• Experiences in wind-tunnel and flight test aerodynamic model validation
• Experience with full aircraft analysis – transonic required, supersonic and launch vehicle desirable
• Test plan development and data analysis experience a strong plus
• Experience in the conduct of flight test, including familiarity with standard flight test practices and safety processes strong plus.
• Working knowledge of aircraft and space systems and familiarity with relevant aerospace standards (FAA, FAA‐AST etc.)
• Advanced skills with Linux, Python, Simulink, MATLAB, Fortran, C, C++, and software development best practices.
• CATIA V5 experience preferred
• Experience with FUN3D, NSU3D, Pointwise, and/or similar RANS and gridding methods
• Applicants must be U.S. persons as defined by the ITAR (22 CFR §120.15)



The Structures Company is an AA/EOE.
 
Job Number: 314
Job Location: CA
Rate: OPEN - **DOE**
Per Diem: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 05/22/2019
Last Updated: 06/26/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Technical Writer

Description:
Testing and Troubleshooting Writer

Location: Shelton, CT OR West Lafayette, IN OR Huntsville, AL

12+ month contract

Butler Aerospace & Defense is seeking an experienced technical writer to work in our writing group authoring the troubleshooting section of maintenance manuals. This position is in support of contracted technical manual revision services and the creation of new publications. The writer’s duties would include researching, documenting, and authoring detailed testing and troubleshooting procedures to the governing specification. The writer will be required to interface with engineers on occasion over the content and review of the publications.



Technical Skills:

Experience with writing maintenance procedures from engineering documentation in the aerospace industry.
Familiar with the operation and maintenance of aircraft systems.
Able to read and interpret assembly/installation blueprints, schematics, wiring diagrams, technical manuals, military specifications, vendor data, and various forms of engineering data.
Possess strong analytical/editorial skills. Be able to review incorporated technical data and provide feedback.
Proficient with desktop publishing using content management software.
Experience with SGML/XML structured document authoring such as EpicEditor or equivalent.
Strong computer skills with a working knowledge of Adobe Acrobat and Microsoft Office.
Preferred, but not required:
Rotary aircraft experience
Avionics technician, or equivalent military experience in aircraft maintenance
Familiar with the use of aircraft technical manuals and related technical data
Experience with Content@ content management software and XyVision publishing software
Experience with specification S1000D
Personal Skills:

Detail-oriented
Process/analytical-oriented
Task/goal-oriented
Team-oriented
Quality-driven
Strong professional communication skills/ability to interact effectively with coworkers
Strong organizational/time management skills
Self motivated
Ability to work under pressure and meet deadlines
Manage multiple jobs with tight deadlines in fast-paced environment
Strong, customer-focused work ethic and positive attitude
Mentoring


Work Experience:

5 years technical writing experience


Areas of Responsibility:

Research, writing, and development of portions of aircraft maintenance manual revisions according to the governing specification and published standard work
Develop concise, complete, technically accurate, and easy to understand technical information in a timely fashion with a very high level of quality
Conduct technical reviews of other writers’ work. Reviews and analyzes the technical information/documents that are incorporated into technical manuals
Provide frequent status
Meet internal and external delivery milestones


Education:

4 year college degree
Work Environment:

Office environment














____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 57051
Job Location: CT, IN, or AL, CT, IN, or AL
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12+ months
Start Date: ASAP
Input Date: 07/05/2019
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Fuel Inerting Systems Engineer - China

Description:
Our Aerospace Client based in China is looking for additional Engineering Support . They require an Aircraft Fuel Inerting Systems Engineer.

This is an exciting opportunity to work in East Asia , contributing to the success of our Client's Aircraft Program. Excellent salary / remuneration for suitable skilled and qualified candidates.

Candidates should be prepared to live and work in Shanghai on a fixed term contract basis for 1-3 years.

Please quote ref: JO0009 on application.



Responsibilities:

Fuel system performance simulation and analysis.
Inerting system performance simulation and analysis.
Fuel tank flammability analysis .
Fuel and inerting system tube stress analysis.
Fuel and inerting system simulation platform building.


Skills/ Qualifications / Experience Sought:


Experience working for main OEM or fuel and inerting system supplier for more than
20 years.
Experience on fuel and inerting system simulation more than 15 years.
Familiar with simulation software, such as Flowmaster, Fluent, CAEPipe, Matlab, Abaqus, etc.
Fluent English, with good communication.
 
Job Number: BHJOB28358_55
Job Location: China
Rate: Negotiable
Duration: 1-3 years
Start Date: 01/09/2019
Input Date: 07/04/2019
Firm Name: STRONGFIELD TECHNOLOGIES USA INC
Attention: Graham Bird
Address: 5000 BIRCH ST STE 3000
City, State: NEWPORT BEACH, CA 92660
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Parts/ Service Clerks

Description:
STS Technical Services is hiring Parts / Service Clerks in Las Vegas, Nevada.

Essential Duties & Responsibilities:
Perform data entry into Invoicing software and maintenance software as required, coordinate parts orders and assist in inventory control.
Follow up with customers on aging invoices.
Maintain accurate and complete filing systems for vendors and customers
Assist in daily invoicing of all completed work orders and parts sales
Accurately receive parts into Inventory software system
Coordinate parts orders
Maintain accurate inventory levels
Responsible for establishing and maintaining a file system
Assist in performing accurate and on time EOM close reports
Continue to receive ongoing training to gain knowledge of the industry
Provide managers updates on new business
Perform Data entry into customers maintenance programs as required
Process vendor invoices to corporate office
Make regular sales calls to increase parts sales
Coordinate daily service and parts transactions
Responsible to accurately invoice repair orders
Responsible to accurately receive parts into inventory
Coordinate requests from customers on Service and parts transactions
Communicate safety concerns with in the operation to management
Communicate customer requests for service to management
Maintain a clean and organized work environment
Qualifications:
High School Diploma
Valid Driver’s License
Good oral and written communication skills
PC literate, Strong word processing skills
Ability to prioritize and organize
Prior work experience in a mechanical work environment
Minimum 1-year experience in a service oriented office environment
Ability to attain Airport issued ID badge Notes from the hiring manager
Relevant experience with automotive parts and/or material handling.
The person we are looking for will need to have a strong back ground in those areas as well as computer skills – basic excel skills are required.
Company Overview & Benefits:
STS Technical Services offers hundreds of career opportunities throughout the United States, and with more than two decades of experience, our aviation recruiters soar in their commitment to excellence and professionalism.

We proudly offer all qualifying candidates competitive rates, direct deposits, medical insurance, cash advances and referral bonuses. Have questions? Contact us today at 1-800-359-4787.
 
Job Number: 47780
Job Location: Las Vegas, NV
Input Date: 06/04/2019
Last Updated: 06/13/2019
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Automation Software Developers

Description:
OOP-object oriented programming, high speed
 
Job Location: Midwest
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: ccastro@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
Location: Fort Worth, TX
Duration: 6 month contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)


****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****


Job Description:
- Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
- Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.
- This position is for an engineer working in the Fort Worth IFG Aircraft Computers Team.
- Job responsibilities will include supporting development of Avionics Mission Computers on aircraft.
- Must be able to work in a fast paced environment and be able to work independently with limited oversight from team lead and manager.
- Must able to travel both domestic and internationally.


Activities include:
- Electronic hardware testing and troubleshooting
- Support Software Development efforts for target hardware
- Review and improve Hardware Specifications
- Work with Suppliers & Engineering during product development lifecycle
- Support of system integration activities
- Development/review of detailed engineering documents for software and hardware release
- Financial analysis of planned team activities
- Development of estimates to complete, development of customer estimates
- Generation of slide presentations in support of customer briefings
- Support development of Supplier Statement of Work & Proposals
- Work closely with Supply Chain Management


Education:
- Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 10333
Job Location: Fort Worth, TX
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 03/19/2019
Last Updated: 07/18/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer - Clearance TX

Description:
163995
1334-1 Avionics Engineer
Work Location: Fort Worth, TX
Status: Open

Qty: 1
Desired Start Date: 2/4/2019
End Date: 9/13/2019

Job Description:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

This position is for an engineer working in the Fort Worth IFG Aircraft Computers Team. Job responsibilities will include supporting development of Avionics Mission Computers on aircraft.
Activities include:
• Electronic hardware testing and troubleshooting
• Support Software Development efforts for target hardware
• Review and improve Hardware Specifications
• Work with Suppliers & Engineering during product development lifecycle
• Support of system integration activities
• Development/review of detailed engineering documents for software and hardware release
• Financial analysis of planned team activities
• Development of estimates to complete, development of customer estimates
• Generation of a slide presentations in support of customer briefings
• Support development of Supplier Statement of Work & Proposals
• Work closely with Supply Chain Management
Must be able to work in a fast paced environment and be able to work independently with limited oversight from team lead and manager. Must able to travel both domestic and internationally.

Work Location: Fort Worth, TX
Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
Pay Rate: $62.00 Hourly
 
Job Number: JE-1334-1S
Job Location: Fort Worth, TX
Rate: 62/hr max
Per Diem: no
Duration: 7 months
Input Date: 01/28/2019
Last Updated: 07/31/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Business Relationship Manager

Description:
Location: Sacramento, CA
Rate: $36.00 - $43.00/HR
Duration: 9 month contract

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role **

Duties:
Within the Indirect Procurement organization, this position is responsible for day to day category management. Serve primarily as the AR Business Relationship Manager to various AR stakeholders and secondarily as the liaison manager to 3rd party outsource providers during the delivery of Indirect Procurement services. Drive teams to execute on contract terms and conditions and work with 3rd party outsource provider category/delivery managers to ensure on-time delivery of projects and sourcing events.

Key Responsibilities
Serve as the AR stakeholder liaison for Indirect Procurement activities with a primary emphasis in Corporate and Professional Services. Experience with IT software (Cloud, SaaS, COTS, etc.) contract negotiations, or Facilities & Site Services and MRO, or Capital Equipment (CapEx) and Capital Construction is a plus. (20%)

Performance Management: Using Service Level or Key Performance methodologies track and analyze vendor performance, generate reports as required, provide operational oversight, assess and execute penalties or incentives per contract terms. Identify issues and opportunities and provide recommendations for performance improvement and, when necessary, implement action plans accordingly. (25%)

Contract Administration: Be the subject matter expert on contracts pertaining to outsourced 3rd party arrangement, including terms and conditions, financial provisions, roles and responsibilities and all supporting documents. Team lead in contract formulation, negotiations, and post-award change control. Using data driven analytics, evaluate and monitor contracts to ensure vendors comply with all contractual terms and conditions. Act as the liaison between AR Legal and vendors. Serve as an informal SME and on-the-job training resource for vendor delivery managers and/or AR stakeholder groups. (25%)

Relationship Management: Establish strong partnerships with AR stakeholders to ensure effective planning and collaboration on appropriate vendor/contractual related matters. Effectively manage relationship with vendor account/delivery managers to ensure consistent service delivery and customer satisfaction. Facilitate communication and coordination of activities between AR stakeholders and vendor delivery managers and project teams. Coordinate vendor activities as they relate to customer initiatives, program enhancements and new implementations. Lead or be a key participant in problem resolution activities, utilizing a governance model as depicted in the contract(s). (25%)

Project Management: Lead or support cross-functional project teams to develop efficient processes aligned with long-term corporate goals. Adapt or create new and effective processes as necessary. Manage broad functional projects and/or participate as a contract SME on larger project or initiatives. (5%)


Skills:
- Experience in a Corporate and Professional Services, or IT software (Cloud, SaaS, COTS, etc.) or Facilities & Site Services and MRO, or Capital Equipment or Facilities related Category Management environment is preferred.
- Experience in a in a third party outsourcing function that included accountability for complex tasks and/or projects required for successful execution is preferred.
- Demonstrated skills in contract formulation.
- Prior experience in negotiating and analyzing contracts along with knowledge of vendor performance metrics preferred.
- Ability to influence others and, be a key contributor or leader on Facilities & Site Services and MRO project teams.
- Contract negotiation and excellent written/verbal communication skills.
- Proficiency with Microsoft Office Word, PowerPoint and Excel; knowledge of other Microsoft Office products.

Education:
- Bachelor's degree required plus minimum of 3-5 years related experience; or equivalent combination of education and experience.
 
Job Number: 10814
Job Location: Sacramento, CA
Rate: $36.00 - $43.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 9 mos
Start Date: ASAP
Input Date: 04/19/2019
Last Updated: 06/25/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Buyer/Procurement Analyst - Clearance KY

Description:
165156/1617-1
Buyer/Procurement Analyst
Work Location: Lexington, KY
Status: Open

Qty: 2
Desired Start Date: 6/3/2019
End Date: 12/31/2019

Job Description:
Sources, purchases, plans, and schedules the movement of raw materials, packaging materials, parts, components, services, supplies, finished goods and related material through production and inventory process. Identifies raw material, component, and related requirements from engineering and production specifications and schedules. Purchases, plans, and coordinates resulting material movement throughout manufacturing and inventory sequences. in front-end procurement mode, analyzes data and determines factors that affect prices and determines lowest cost consistent with quality, reliability, and ability to meet required schedules. Reviews proposals, negotiates prices, selects or recommends suppliers, analyzes trends, follows up orders placed, approves payment, and maintains necessary records of material movement throughout manufacturing and inventory cycle(s). Coordinates and follows up with production, warehouse, and engineering personnel to ensure appropriate procurement, scheduling, and movement of materials and services.

Work Location: Lexington, KY
Level: Level 2: BS+3-5 YRS or MS+0-3 YRS
Pay Rate: $18.00 - $34.20 Hourly

Areas of Expertise Supply Chain No 1 1 - 2 Years
Software Skills MS Office Yes 1 1 - 2 Years
 
Job Number: JE-1617-1S
Job Location: Lexington, KY
Rate: 34.20/hr max
Duration: 5 months
Input Date: 06/07/2019
Last Updated: 10/03/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
C, C++ RTOS Software Engineer Secret Clearance

Description:
*This is a 1 year, contract position, located ON SITE in Orlando, FL*


We are hiring a contract Real Time embedded C++ software engineer who will be working on Secret/Top Secret projects for a military/DoD subcontractor. The position requires a candidate with strong background in the full development lifecycle including architecture design. Applicant will be working on supporting integration of software functionality into tactical military hardware.


All work is conducted ON SITE only, by US Citizens who are actively SECRET Cleared


Required
*4-8+ years in a DoD software role, developing software in embedded C/C++.
*Experience with VxWorks/Linux or Integrity RTOS environment

*Current Active (or active in last 2 years) Secret Clearance; which requires US Citizenship in order to apply.
*BS degree in Engineering, Computer Science or equivalent



Pluses:
*Familiar with communication busses/protocols such as RS-232, RS-422, MIL-STD-1553 and Ethernet
*Experience with CM tools Razor, Accurev, Git, JIRA, SVN.
*Familiarity with Visual Studio (i.e., Visual C++).
*Experience developing with C#, familiar with Qt
*Development in an Open architecture, multi-core processing environment.
 
Job Number: 175
Job Location: Orlando, FL
Rate: up to $85 DOE
Per Diem: yes split
Duration: 1 year or more
Input Date: 08/30/2019
Last Updated: 10/11/2019
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Software Engineer ( Clearfield, Utah ) 9185290

Description:
CNC Software Engineer ( Clearfield, Utah ) 9185290
8 Month Contract

Pay Rate: $50-60/hr maybe more for the right candidate

Job Description:
As a CNC Software Engineer, you will use CAD / CAM tools to generate or edit Machine Programs to support automated machining centers

Requirements & Qualifications:
• MUST HAVE AN ACTIVE SECURITY CLEARANCE TO BE CONSIDERED FOR THIS ROLE with last investigation within the last 4.5 years. Candidate will need to obtain SAP clearance.
• Bachelor’s degree in Engineering and 4 years related work experience
• Working knowledge of NX CAM 5-Axis Milling
• Fanuc 31i experience
• Siemens 840D experience
• Investigate and resolve manufacturing machine problems and instigate corrective actions and follow-up on equipment i.e. CNC mills/lathes
• Prepare solid model or complex geometry
• Perform blue print reading
• Troubleshooting manufacturing processes
• Windows and MS office skills required
Preferred Skills and Experience:
• Experience with NX and Siemens FiberSIM
• Aerospace or manufacturing experience
• Familiarity with composites
• Project Management
 
Job Number: 9185290
Job Location: Clearfield, UT
Rate: 50-60
Per Diem: yes
Overtime: Yes
Duration: 8 Months
Start Date: ASAP
Input Date: 06/05/2019
Last Updated: 06/05/2019
Firm Name: TALENTPRO CONSULTING
Attention: Tim Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Computer Systems Architect 4 CA

Description:
Computer Systems Architect 4 (Job Number: 19009600)

Number of Openings: 1

Location(s): United States-California-Manhattan Beach


Shift: 1st Shift

Target Start Date: May 6, 2019

Target End Date: May 1, 2020

Pay: $65.00 - $70.00 per hour

Work schedule: 9/80

Location: Manhattan Beach, CA

Duration of Assignment: Up to 1 year

Position Summary / Responsibilities

We are looking for an individual who will support custom test controllers, special test equipment and

networks in the engineering areas. Strong system administration skills and IT hardware and operating systems are

required to support high availability/dynamic environments such as engineering labs and Integration and test beds in the

Space program areas

Recurring responsibilities:

- Use Enterprise Level hardware and application software and setting up centralized services

- Design technical sound solutions for system requirements including both functional and the security compliance

- Implement security controls and profiles and communicate with information security/computer security office to ensure

compliance.

- Repair and recover from hardware or software failures

- Deliver updates and coordinate with impacted team including conducting reviews and presenting findings.

- Perform continuous monitoring for systems, including documentation for supporting the process.

- Develop patching and remediation activities including developing the end to end process with users and implementing

them.



Qualifications


Basic Qualifications:

9 Years with Bachelors in Science; 7 Years with Masters; 4 Years with PhD.
 
Job Number: JK-1754
Job Location: Manhattan Beach, CA
Rate: 70/hr max
Per Diem: no
Duration: 12 months
Input Date: 06/12/2019
Last Updated: 07/08/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Continuous Improvement Engineer/Analyst

Description:
*This is a full time, 6-9 month contract position, located in York, PA*



We are hiring for a Continuous Improvement Specialist who will be planning, training, working with staff to introduce a culture of continuous improvement. The goal is to improve overall quality, less defects while reducing waste, revisit processes searching for improvement and simplification, improving production times and manufacturing floor flow.



Day to day duties may include maintaining the quality management system including investigating Corrective Action items/events, working on root causes, develop process improvements for sustained process control, ensure maintenance of factory quality, cost and delivery metric goals, implementing corrective actions, statistically analyze metrics that ultimately help lead to better systems and higher quality and cost outcomes.



Required:
*4+ years’ experience in a large firm continuous improvement role including working on investigation teams conducting event change causal analysis
*Strong root cause info gathering and solution resolution; risk mitigation and resolution.
*Have Lean Six Sigma, Green Belt or Black Belt Certification
*Experience leading and closing out Continuous Improvement DMAIC Projects
*SPC and Lean Manufacturing experience
*BS in Engineering



Pluses:
*ASQ CQE certification
*Experience with RCA software (REASON or Taproot)
*Familiar with Minitab metrics and data analysis
 
Job Number: 766
Job Location: York, PA
Rate: $49.20
Per Diem: yes split
Duration: 6-9 months
Input Date: 06/26/2019
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer

Description:
Must be able to obtain a security clearance
Experience using Pro/e, Unigraphics or other 3-D CAD software required
Design of weld joints for steel and aluminum structures
Design and development of ground combat vehicle structures, armor and spall liner.
Knowledge of GD&T required
 
Job Number: 46108
Job Location: MI
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 06/03/2019
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Designer/Drafter / NX MCAD NY

Description:
165064
Request number: 6074
Job title: Designer/Drafter
Number of openings: 2
Position location: East Aurora - NY
Employment type: Contract
OT exempt: No

Shift: 1st Education Requirement: BS/BA
Driving on company time?: No
Minimum Years of Experience: 5
Maximum Hourly Pay Rate: 39
Start Date: 02/04/2019
Tentative End Date: 07/31/2019


Function:
Reporting to the Supervisor of Drafting and under technical direction from Engineering the Mechanical Design Drafter, assumes the responsibility for layouts, models, and mechanical hardware drawings in support of development and product design. Tasks include organization and planning of the number and types of drawings, part selection, parts lists generation, developing complex design layouts and related packaging support documentation. The incumbent is responsible for performing Tolerance Analysis in conjunction with utilization of GD&T methodologies to meet both design, manufacturing, and inspection requirements. The incumbent must also have a working knowledge of configuration management control of product design.

Ideally experience and in-depth knowledge in utilization of Siemens NX Mcad design software is desirable (required). Additionally experience using 3D Mcad software package ie: Solidworks or PTC Creo is a plus. Experiential knowledge of Teamcenter PLM is desirable as well.
Also it is desirable if the candidate has experience in customizing their Mcad environment taking advantage of the Mcad functionality promoting cad efficiency.

Education:
AAS with applicable experience is also acceptable


Request status: Open
 
Job Number: MB-6074
Job Location: East Aurora, NY
Rate: 39/hr max
Per Diem: no
Duration: 6 months
Input Date: 05/30/2019
Last Updated: 06/17/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Designer

Description:
Seeking a talented Electrical Designer with experience in design of electrical systems CAD software, preferably with heavy industrial equipment and/or heavy industrial facilities. This person will work on multiple projects with other Designers and Engineers to support their client’s projects and schedules.

Responsibilities include but are not limited to:

Ability to work in the field
Ability to perform field surveying of existing conditions

Ability to communicate and work alongside a multidisciplinary team of designers and engineers

Prepare design documents using AutoCAD and Bentley MicroStation products

Prepare electrical construction drawings for various maintenance and capital projects in heavy industrial processing facilities.

Substation design

Interface with Project Engineering
 
Job Number: 23627
Job Location: Philadelphia, PA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: Temp to Direct
Start Date: ASAP
Input Date: 06/03/2019
Firm Name: JOHN GALT STAFFING INC
Attention: Al Dubosky
Address: 77 S BEDFORD ST
City, State: BURLINGTON, MA 01803
Phone: 781/273-9995
800 Phone: 888/946-4754
Fax Phone: 781/273-9099
Website: www.j-galt.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Certified Interconnect Designer (CID) - Electrical Designer / CAD Drafter

Description:
The Electrical Designer/CAD Drafter position will have emphasis on Aerospace Electronics Circuits.

Activities will include:
• conceptual layout,
• detailed design, and
• engineering documentation of complex multi-layer analog, digital, mixed signal, RF, high speed, and high-power PCB layout designs.
• Interfacing with other engineering groups to insure design requirements are fulfilled.

The selected candidate will work as a member of the Electronic Systems Center, and will be part of design, development and momentum support on aerospace electronic solutions.

The position may involve direct interface with customers (internal and external) and suppliers in support of developing an understanding of the electrical design constraints. The position will work with cross functional teams to resolve issues. In addition, some travel to customer and supplier facilities may be required.

Responsibilities may include:
• Interpreting electrical design requirements and creating original board layouts, detailed drawings, schematics, and illustrations
• Providing for compliance with items such as specifications, tolerances and safety factors when performing highly specialized electrical designs
• Performing specialized electrical design computations and analysis
• Preparing diagrams and PCB design schedule estimations.
• Coordinating electrical design work with Electrical Design Engineers
• Collecting background information and helping write specifications and electrical design practices
• New product development from concept through production
• Processing documents through document change system

Required Qualifications:
• IPC Certified Interconnect Designer (CID), as a minimum.
• Minimum 5 years’ experience with Cadence v16.6 – v17.2 Concept HDL schematic capture and Allegro PCB layout tool sets.
• Thorough knowledge of IPC standards regarding PCB design, fabrication and assembly.
• Thorough knowledge of Cadence Library manager.
• Thorough knowledge of implementing design constraints and the use of constraints within Cadence Concept HDL schematic capture and Allegro PCB layout tool set.
• Full understanding of the data structure of a typical database (design) within Cadence Concept HDL schematic capture and Allegro PCB layout tool set.
• Experienced in implementing manufacturer’s data as well as PCB and CCA suppliers DFM recommended suggestions.
• Full understanding of PCB, FAB and CCA manufacturing processes.
• Applicant should be highly motivated, with demonstrated leadership and communication skills and pays close attention to detail.
• Must be a US Citizen or US person.

Preferred Qualifications:
• IPC Advanced Certified Interconnect Designer (CID+).
• Experience with Siemens Teamcenter PLM Software.
• Knowledge of GD&T ASME Y14.5.
• A background working on avionics design related experience
• Knowledge of and the use of Hierarchal schematic blocks
• Experience with Mentor Graphics DxDesigner-Expedition Enterprise flow
• Experience with Microsoft Visio
 
Job Number: 1910100867
Job Location: Phoenix, AZ
Overtime: possible
Duration: 6 months
Start Date: ASAP
Input Date: 07/10/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Responsible for evaluating test requirements for RF communication units such as radios, RES boards, baseband boards, power supplies and power amplifiers and specify test equipment, develop associated electrical interfaces such as circuit boards and cabling to implement a hardware test solution.
Work with test software group to coordinate test hardware to meet test requirements.
Work with mechanical designers to implement test fixtures as part of the hardware test solution.
Develop test solution concepts and prototypes of initial concepts.
Document test hardware and software using computer-based tools such as DxDesigner and Visio
Implement standard Configuration Management techniques in design architecture
Direct technicians in the completion of test system fabrication and troubleshoot
Typical day is Engineering Design Reviews
Education/Experience
Bachelors
MUST HAVE Experience in designing cable circuit board, Electronic Test equipment especially RF along with multimeter oscilloscopes switch matrix
 
Job Number: 49680
Job Location: Rochester, NY
Duration: 12 months
Start Date: ASAP
Input Date: 06/12/2019
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Rick Nussbaum
Address: 1857 WELLS RD STE 214
City, State: ORANGE PARK, FL 32073
Phone: 904/562-3221
800 Phone: 866/277-3343
Fax Phone: 904/713-2000
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Electrical Engineer

Location: St. Louis, MO

9 month contract

We are seeking electrical engineers for design work on a major military program. Three phases, phase 1 translation cleanup to Mentor Graphics, phase 2 new a/c system wiring diagram design and phase 3 wire routing installation design.

Degree Requirements: BS degree in Electrical Engineering or significant industry experience. Years of experience can be added for post-BS education.

Skill Requirements:

Aerospace system electrical engineering experience
Wire diagram design experience
Wire design experience
Wire installation design experience
Software/tool Requirements:

CATIA V5
Enovia (or some PLM system)
Mentor Graphics Capital
NX
Microsoft Office including Visio
Rhapsody







____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 57048
Job Location: St. Louis, MO
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 9+ months
Start Date: ASAP
Input Date: 07/05/2019
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Capable of getting a secret clearance desired

Extensive vehicle and lab testing required

Support hardware and software integration in a lab environment to include the use of various test equipment to include dynamic analyzers, oscilloscopes, logic analyzers, Ethernet, RS-422, etc.

Perform vehicle level testing utilizing the same type of equipment.

Analyze subsystem requirements and develop logic for flowcharts, state charts, state diagrams, and fire control algorithms for design documents.
 
Job Number: 46816
Job Location: MI
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 06/06/2019
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer (Elevator Industry)

Description:
The ideal candidate will perform research, development, design, and testing of electrical components, PC Board Layout, Electronics Packaging equipment, facilities, systems, products and networks for commercial, industrial and governmental purposes.

This position will provide product support for a variety of elevator components and electrical systems. The position will play a crucial role in maintaining product integrity, evaluating opportunities, and integrating new component designs into existing systems, while working to meet agreed upon cost and schedule commitments.

The candidate should be able to interpret schematics, wiring diagrams, mechanical assembly drawings, and sometimes building plans in order to analyze complex problems and identify root cause issues and develop innovative solutions. Ability to work across disciplines with mechanical engineers, software engineers, manufacturing personnel, and field personnel is required.

Experience/Qualifications
MA/MS degree with 1 to 2+ years’ experience or a BA/BS degree with 2 to 5+ years’ experience

Preferred Skills:
• Sound Electrical Engineering background including wiring diagrams, systems analysis, motor and control applications, and control logic
• Control System Logic and Power Electronics
• Ability to work with suppliers/3rd parties
• Experience with test and measurement equipment
• Understanding of mechanical and software functions
• ECAD tools (Cadence, E3, or others.)
• Strong communications skills and leadership ability
• MS Office applications (Word, Excel, Power Point, etc.)
 
Job Number: 1910102093
Job Location: Florence, SC
Per Diem: split
Overtime: possible
Duration: 7 months
Start Date: ASAP
Input Date: 06/27/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer II

Description:
**Position requires U.S. Citizenship.**

Job Responsibilities:
Working knowledge of system design software (Labview, TestStand, C++, etc).
Prior schematic capture/PCB generation experience in CAD software.
Exposure to various test equipment architectures (VXI, PXI, Rack and Stack, etc).
Knowledge of communication protocols (Modbus, Ethernet, CAN, Profibus, etc).
Electronic circuit knowledge: digital, analog, power and high voltage.
Experience with electrical and pneumatic systems.
Ability to review legacy equipment to troubleshoot issues in design or performance.
Hands on experience with hand tools and lab instruments (multimeter, oscilloscope).
 
Job Number: 34744
Job Location: Knightdale, NC
Duration: 12 mos
Input Date: 06/06/2019
Last Updated: 06/19/2019
Firm Name: TAD PGS INC
Attention: Kim Silcott
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer III

Description:
**Position requires U.S. Citizenship.**

The Systems Engineer will be responsible for working on the concept, requirements, design, development and testing of an aircraft electrical power system.

In the role of Systems Engineer, you will utilize your power electronics, power generation and distribution, controls, software, and simulation expertise to work with the customer in defining, allocating, validating, tracing, verifying, and documenting customer requirements. You will help in certifying electric power systems on commercial airplanes.

Job Responsibilities:
Design Power Systems Architectures in co-operation with aircraft manufacturers.
Utilize your power electronics, power generation and distribution, controls, software, and simulation expertise to work with the customer in defining requirements.
Derive system interfaces.
Work with subsystem leads in developing, allocating, validating, tracing, verifying, and documenting requirements.
Perform system analysis, safety analysis, modeling, and simulation.
Develop the systems test environment.
Development system test plans and procedures and get their approval with the customer.
Work on developing and releasing test reports to customers.
Define Safety of Flight and Qualification tests and ensure that critical safety aspects of electric system are tested and verified to enable flight test program.
Develop and execute objectives for yourself and others; can affect short-term and some long-term business goals.
Maintain scope baseline.
Work with both real-time and non-real-time systems, such as hardware-in-the-loop and computer-in-the-loop simulations and be able to distribute these simulations.
Document the results of analyses and studies in technical reports.
Develop significant Customer interaction and relationship acting as reliable focal point for assigned LRU.
Assure proper documentation of technical data generated for the assigned tasks consistent with engineering policies and procedures.
Support technical and program reviews.
Job Qualifications:
Degree in Mechanical/Aeronautical/ Electrical Aerospace Engineering.
Experience in requirements development, verification and validation.
Experience in system engineering and project management/planning.
Knowledge of aircraft power distribution and generation
Clear thinking and diligent approach.
Strong interpersonal and communication skills.
Desired Characteristics:
Knowledge of electrical power systems technical requirements, certification requirements.
Experience/ knowledge of the development lifecycle phases.
Strong technical aptitude, including applicable engineering tools and systems, i.e. DOORs.
Good written and verbal communication skills.
Proven ability to contribute in a team environment.
Experience of RTCA DO-178B/C, SAE ARP4754A or similar rigorous development standard.
System mindset and problem solver .
 
Job Number: 35475
Job Location: Ayer, MA
Input Date: 06/19/2019
Firm Name: TAD PGS INC
Attention: Kim Silcott
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

Electrical Engineering Test Tech

Description:


PRIMARY FUNCTION:
The Electrical Engineering Test Technician will perform configuration and acceptance testing of complex electronic systems/assemblies, by applying principles and theories of electronics, electrical circuitry, engineering mathematics, electronic and electrical testing.
This position follows a 4x10 compressed workweek schedule.
JOB DUTIES:
 
  • Test product, using standard test equipment and procedures, and analyze results to evaluate performance and determine need for adjustment.
  • Assemble, test, and maintain circuitry or electronic components according to engineering instructions, technical manuals, and knowledge of electronics, using hand and power tools.
  • Read schematic drawings and engineering instructions for assembling electronics units, applying knowledge of electronic theory and components.
  • Adjust and replace defective or improperly functioning circuitry and electronics components, using hand tools and soldering iron.
  • Maintain documentation of testing and equipment operation.



 



 





 



BASIC QUALIFICATIONS:
 
  • Ability to read and interpret schematics, assembly drawings, procedure manuals, parts lists and wire data lists.
  • Knowledge of analog and digital symbol identification
  • Knowledge of test practices and procedures.
  • Personal computer skills required to configure and load software
  • Ability to operate test equipment such as: ohmmeters, digital voltmeters, generators, counters, oscilloscopes, and personal computers.
  • LINUX operating system experience able to run detailed procedures to configure Firmware and load Software, Test and Troubleshoot, RF Experience, and run Acceptance Test Procedures.  


EDUCATION AND EXPERIENCE:
 
  • Associate's degree (A. A.) or equivalent in Electronic Technology or related field of study preferred.  
  • 2 years related experience and/or training; or equivalent combination of education and experience.


QUALIFIED APPLICANTS MUST MEET FOLLOWING REQUIREMENTS:
 
  • Valid State Driver’s License
  • Must be DoD Clearance Eligible


PHYSICAL ACTIVITY:
Climbing, Balancing, Stooping, Kneeling, Crouching, Crawling, Reaching, Standing, Walking, Pushing, Pulling, Lifting, Fingering, Grasping, Feeling, Hearing, Talking, and Repetitive Motions




 


 
Job Number: 1910099812
Job Location: Hunt Valley, MD
Per Diem: Yes
Duration: 12 months
Input Date: 03/18/2019
Last Updated: 08/07/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Chris O\'Connor
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002jXr7QAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Test Engineer - Secret Clearance

Description:
Major functions:

Under limited supervision and with moderate latitude in assignment, may perform some, or all, of the following:

• Develop and implement test plans, test cases, and test software based on project requirements

• Create pass / fail evaluation metrics

• Perform test integration and post-test data analysis

• Perform regression and qualification testing generating test documentation and presenting results

• Create and use test harnesses for embedded systems



Requirements:

Active Secret clearance required walking in the door



Education/Experience/Licenses etc.:

Required Education/Experience: Bachelors Degree in Engineering, Math, or Physics.

• Seven or more years experience with embedded system testing, integration, and validation techniques

• Seven or more years experience documenting test results for corrective actions, reporting, and audits

• Five or more years experience defining system pass / fail metrics and with performing test data analysis

• Familiarity with RF, Navigation, and GPS

• Excellent written and verbal communication skills required

• Ability and motivation to quickly learn the program scope and fundamentals required to support a fast moving project

• Expertise testing in an embedded software development environment with broad lab experience integrating with target hardware.

• Ability to successfully interact with other Engineering disciplines including design, systems, and software engineering functions.

• Capable of working in a team environment with the ability to work independently at times with minimal supervision

• Demonstrated self-starter

• Some weekends and evenings will be required

• Occasional travel may be required (<5%)

Special Requirements: Must have an Active Secret Security Clearance. US citizenship required for this position.




Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
 
Job Number: 19-21565
Job Location: Anaheim, CA
Rate: 80.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2019-12-31 00:00:00.0
Start Date: 2019-06-17 00:00:00.0
Input Date: 05/28/2019
Last Updated: 08/20/2019
Firm Name: NESCO RESOURCE
Attention: Kevin Lord
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic System Design & Analysis

Description:
Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs. This Diagnostic Modeler position requires an engineer capable of performing analysis of reliability, maintainability, and system health of aircraft subsystems. Ability to analyze complex electrical and mechanical subsystems is essential. You will evaluate failure mode effects and criticality analysis (FMECA) data from subsystem suppliers to create fault trees and model the fault behavior using MATLAB and Simulink. You will work with the latest generations of aircraft platforms (both commercial and military). You should have a working knowledge of Fault Detection, Fault Isolation, False Alarm Mitigation, and No Fault Found (Can Not Duplicate). You will develop diagnostic models from schematics, FMECAs, and another available supplier documentation. The chosen candidate will translate these models to a Times Failure Propagation Graph (TFPG) model via scripts. The chosen candidate will also translate the information from the diagnostic models to MATLAB\SIMLINK models via scripts. The chosen candidate will work with a real-time software development team to create the Real Time Maintenance Computing (RTMC) application or other fault diagnostic reasoning engines.
 
Job Number: ESDE_Hazelwood
Job Location: Hazelwood, MO
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12 mon
Start Date: ASAP
Input Date: 05/28/2019
Last Updated: 06/03/2019
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic System Design & Analysis

Description:
Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

Education/experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a master’s degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
 
Job Number: ESDE_OK
Job Location: Oklahoma City, OK, OK
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6 mon
Start Date: ASAP
Input Date: 04/01/2019
Last Updated: 06/03/2019
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded S/W Engineer

Description:
Mandatory
Experience with embedded real-time development in C and C++ Experience in software coding, unit test, integration, and verification RTOS experience with VxWorks, Integrity, or Linux Experience with Hardware-Software integration Excellent communication skills.

Desired
Bachelor's Degree in Computer Engineering or Computer Science. Experience generating and maintaining program software documentation such as SRS, ICD, Test Plans, Test Procedures Experience with software configuration management tools such as Razor, Accurev, Git, JIRA, SVN Familiarity with Visual Studio (i.e., Visual C++)
 
Job Number: 130255
Job Location: Orlando, FL
Input Date: 06/03/2019
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Sanjay Khatri
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer

Description:
Must Be Eligible for a Clearance.

Experience with embedded real-time development in C and C++ Experience in software architecture, design, coding, unit test, integration, and verification RTOS experience with VxWorks, Integrity, or Linux Experience with Hardware-Software integration Excellent communication skills

Experience generating and maintaining program software documentation such as SRS, ICD, Test Plans, Test Procedures Experience with software configuration management tools such as Razor, Accurev, Git, JIRA, SVN Familiarity with Visual Studio (i.e., Visual C++)
 
Job Number: 45962
Job Location: FL
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 06/04/2019
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Manufacture Design Contract Labor 4 / NX 8.5 or later required with PMI knowledge FL

Description:
164950/1764
Engineer Manufacture Design Contract Labor 4 (Job Number: 19009827)

Number of Openings: 3

Location(s): United States-Florida-Melbourne


Shift: 1st Shift

Target Start Date: Jun 17, 2019

Target End Date: Dec 20, 2019

Pay Rate: $55/hr

Work Schedule: 9/80

Duration of Assignment: 12-20-19

3 Openings

Client is seeking experienced Aircraft Structural Designers.

Candidates should have design experience with a focus on metallic structure, wing structure design, machined part design, sheet metal and knowledge of GD&T. Familiarity with military and industry standards pertaining to material, processes and hardware.

NX 8.5 or later required with PMI knowledge a must.

Candidate should be familiar with drawing/PDP release process utilizing Teamcenter.

(Siemens) Teamcenter Enterprise / Teamcenter Unified familiarity a plus.



Qualifications


Basic Qualifications:

Bachelor of Science degree in STEM discipline.

9 years minimum aircraft metallic structural design experience.

CAD Experience using Siemens NX 8.5 or later.


Preferred Qualifications:

Bachelor of Science in Mechanical or Aeronautical/Aerospace Engineering.

Prior experience with Northrop Grumman products. (E-2, JSTARS etc.)

(Siemens) Teamcenter Enterprise / Teamcenter Unified or similar PLM software.

Design of aircraft wing structure.

Familiarity with Design Review Process.

Microsoft Office Suite.

Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplishing them simultaneously.
 
Job Number: JK-1764
Job Location: Melbourne, FL
Rate: 55/hr max
Duration: 6 months
Input Date: 07/15/2019
Last Updated: 07/15/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Designer III & IV - (Everett, WA)

Description:
Several openings in WA:

Leads the development of highly complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements. Leads design reviews, design requirement collection, drawing creation and revision. Researches the application of robotics, automation and new technology to support the build plan. Creates off-load packages, specifications, purchase requests and usage instructions for equipment and tooling. Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Establishes and validates spares requirements. Leads the implementation of best practices into functional process documentation to drive standard work. Oversees the development and documentation of equipment and tooling inspection and usage instructions, preventative maintenance plans, and user training. Provides technical direction to support engineering changes and discrepancy resolution. Oversees the maintenance of hardware and software configuration. Assesses and makes recommendations for disposition of equipment and tooling.

CATIA V5

Prefer an AA degree in related discipline and typically 6 or more years of related experience or an equivalent combination of education and experience.
 
Job Number: EquipTDEverett
Job Location: Everett, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 04/18/2019
Last Updated: 06/03/2019
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FPGA Design/Verification Engineer - Clearance TX

Description:
163983
1333-1 FPGA Design/Verification Engineer

Work Location: Fort Worth, TX
Status: Open

Qty: 2
Desired Start Date: 1/28/2019
End Date: 8/1/2019

Job Description:
Researches, designs, develops, and tests a variety of electronic equipment and systems, including radar and radiation detection equipment; radio, television and other communications equipment and systems; circuitry components; analog and digital computers; and control and test equipment.

This position is for an engineer working in the Fort Worth IFG Hardware Design Team. Job responsibilities will include supporting development of Hardware, Software & Firmware for aircraft.

Responsibilities include:
• Electronic circuit design including Digital and Analog
• Electronic circuit board design, lay out, and routing
• FPGA development, integration, and test
• Electronic hardware testing and troubleshooting
• Support Software Development efforts for target hardware
• Author and Review Hardware Specifications
• Development and review of detailed engineering documents for firmware and hardware release
• Lead and Develop early career team members

Work Location: Fort Worth, TX
Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: JE-1333-1S
Job Location: Fort Worth, TX
Rate: open
Per Diem: no
Duration: 8 months
Input Date: 03/04/2019
Last Updated: 07/31/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Instrument Engineer

Description:
Flight Test Instrument Engineer

Windsor Locks, CT
$67/hr
1 year W2 contract
First Shift

Description:
Design, implement, and maintain test processes for Space Systems hardware using lean philosophies and techniques. Take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing. This can involve testing, data analysis, and interface with all aspects of the engineering department.

Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program. Responsibilities also include daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met.

Typical Duties:
Support laboratory testing of Space hardware, Develop and validate tooling concepts, Author and maintain operation/test procedures, Preparation of standardized operation/test sheets, Defining test rig and facility requirements, Participation on program Integrated Product Development teams, Review drawings and concepts, and resolve productivity concerns.

Experience with advanced electrical instrumentation and data acquisition systems is required.
Knowledge of LabVIEW desired. Experience should also include five years working on the testing of complex electrical systems, testing and troubleshooting of complex FPGA (Fully Programmable Gate Array), digital and analog based electronic controllers, testing of components such as HED (Hall Effect Device) based pumps and brushless DC motors.
Applicant must have the capability of working independently and be self-motivated.
Excellent communication skills, written and verbal are required. Ability to proficiently operate common Microsoft Office software products is required.

-Bachelors degree required
 
Job Number: 10744
Job Location: Windsor Locks, CT
Rate: 67
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 08/15/2019
Last Updated: 10/01/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Instrument Engineer

Description:
Flight Test Instrument Engineer

Windsor Locks, CT
$67/hr
1 year W2 contract
First Shift

Description:
Design, implement, and maintain test processes for Space Systems hardware using lean philosophies and techniques. Take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing. This can involve testing, data analysis, and interface with all aspects of the engineering department. Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program.

Responsibilities also include daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met.

Typical Duties: Support laboratory testing of Space hardware, Develop and validate tooling concepts, Author and maintain operation/test procedures, Preparation of standardized operation/test sheets, Defining test rig and facility requirements, Participation on program Integrated Product Development teams, Review drawings and concepts, and resolve productivity concerns.

Experience with advanced instrumentation and data acquisition systems is required.
Knowledge of LabVIEW desired.
Experience should also include five years working on the testing of complex mechanical systems, testing of complex mechanical systems, testing of components such as, heat exchangers, pumps, fans, & accumulators. Applicant must have the capability of working independently and be self-motivated.
Excellent communication skills, written and verbal are required.
Ability to proficiently operate common Microsoft Office software products is required.

-Bachelors degree required
 
Job Number: 10637
Job Location: Windsor Locks, CT
Rate: 67
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 03/18/2019
Last Updated: 08/08/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight/Mission/System Test Engineer

Description:
• Supports the development and verification of test methods.
• Develops detailed test procedures, and instrumentation and configuration definition, needed to perform the test and minimize risk within the constraints of the test plan.
• Develops solutions to calibration systems problems of limited scope and impact.
• Designs test hardware, software and systems to achieve test requirements.
• Uses analytical tools to verify the design.
• Analyzes, processes, and formats data to customer requirements.
• Reviews test data, including off-nominal data, for accuracy, quality and/or fidelity prior to delivery to customer.
• Prepares and publishes test reports to document test results and satisfy requirements.
• Presents test results internally.
• Archives data and reports.
• Trains others.
• Works under general direction.
 
Job Number: T&EESeattle
Job Location: Seattle, WA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 9 mon
Start Date: ASAP
Input Date: 05/28/2019
Last Updated: 06/03/2019
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Shailendra Mishra
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Foreign Object Debris/Damage (FOD) Specialist (Top secret (Yankee White) clearance)

Description:
Top secret (Yankee White) clearance required.

Seeking an experienced, customer focused, self-motivated individual to join the team as an FOD Specialist. The FOD Specialist will manage and direct a team of employees engaged in activities related to the management of tool cribs and tooling for manufacture and testing of aircraft. The Tool & FOD Control Manager will also develop, implement, and enforce FOD prevention programs for the site. This position requires a broad knowledge of company administration policies, procedures, practices and related manufacturing business concepts and their applications.

Job responsibilities include the following:
• Enforce and enhance company FOD and tool control processes and procedures at the FAFO site.
• Plan and direct tool crib activities necessary to meet the goals of the department and company in accordance with established quality and safety standards.
• Create a workplace environment where quality improvement tools are used effectively to achieve “world class “operations and enterprise excellence objectives.
• Ensure applicable product quality, aviation/product safety, and workplace health and safety requirements imposed by customers, government oversight agencies, and company executive management are met.
• Assess training requirements to ensure all direct reports receive appropriate training.

Basic Qualifications
• Bachelor’s degree or equivalent work experience
• 2+ years of prior experience in an aircraft maintenance, inventory control, or manufacturing operations environment.
• Strong team building skills, preferably leading hourly bargaining unit associates. Demonstrated ability to establish and maintain engaged and productive working relationships.
• Demonstrated ability to effectively prioritize and manage multiple tasks and responsibilities in a fast-paced environment. Must be a self-starter who is resourceful and takes initiative.
• Must possess strong interpersonal skills with the ability to effectively interface with all levels of the organization, suppliers, customers, and governmental oversight organizations.
• Demonstrated ability to effectively communicate orally, in writing and in group sessions as a member or leader.
• Must be customer focused and a team player.
• Must be enthusiastic with a positive outlook and possess a “can-do” work ethic.
• Must demonstrated experience identifying and implementing continuous improvement initiatives.
• Must possess general aviation knowledge.
• Ability to effectively utilize common business computer software such as MS Office and PowerPoint.

Desired Skills
• Previous experience managing flight line tool cribs, tool / FOD control programs
• Prior leadership experience
• Previous aircraft manufacturing and/or maintenance experience especially rotary-wing aircraft
 
Job Number: 1910102807
Job Location: Patuxent River, MD
Per Diem: split
Overtime: possible
Duration: 15 months
Start Date: ASAP
Input Date: 07/24/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fuel Systems Engineer

Description:
Fuel System Engineer responsible for the design of the Fuel System and related system integration. This includes requirements definition, specification and ICD creation, Supplier coordination, test execution, drawing creation, product certification, product improvement, and field support. Ability (or interest) to conduct fuel system performance analysis using 1-D fluid flow simulation software (i.e. Flowmaster, AMESim or similar analytical tools) is highly desired, but not required.

Duties and Responsibilities:
• Communicates effectively in both verbal and written format. Candidate should be able to adjust communication content and approach based on audience
• Manages task execution to ensure on-time and on-target completion
• Searches for problem root cause and develop corrective action plans and solutions
• The primary role of this position within the team will be as a general fuel system engineer. Specifically, this will entail:
o Support fuel system production and field issues with troubleshooting.
o Implement design improvements to the current fuel system design.
o Interface with current fuel system suppliers to manage supplier changes
o Participate in testing including supplier qualification testing, and flight testing
o Able to manage the certification aspects of major and minor changes including test plans, test reports and analysis reports that will be submitted to the FAA
• An additional role for this position within the team will be as a fuel system performance analyst; is desirable to find a candidate that has proficiency or interest in performing this analysis, but not a required skill. If interested, this role will entail
o Modeling the fuel system using a 1-D fluid flow simulation software such as AMESim or Flowmaster
o Performing performance assessments of the fuel system including tank filling performance, fuel distribution and supply performance, vent system performance, unusable fuel simulations, negative acceleration simulations and other system performance simulations
o Comparing analysis results to flight test data
o Evaluating performance impact of proposed design changes
o Writing reports documenting analysis results
• Additional roles within the team may be available at different program phases

Education, Work Experience, Certification and/or Licensure:
• BS in Engineering with 5 or more years directly related experience or MS in engineering with 3 or more years of experience
• Previous aerospace experience at either Supplier or OEM
• Some Travel will be required


Knowledge, Skills and Abilities:
• Familiar with industry documentation for design, test, and certification of propulsion systems
• Proficient in Microsoft Office Products.
• Familiar with FAR Part 23 or Part 25.
• Familiar with Industry standards such including DO-160, MIL-HDBKs and SAE ARPs.




The Structures Company is an AA/EOE.
 
Job Number: 297
Job Location: NC
Rate: OPEN - **DOE**
Per Diem: Yes
Overtime: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 10/09/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Guidance Navigation & Control Engineer (Embedded Software Development)

Description:
Client is seeking a multi-disciplinary engineer to design, implement, and verify embedded flight electronics software algorithms, working under minimal direction.

Responsibilities include:
• Eliciting and defining the software requirements.
• Designing, implementing, and integrating a solution to meet the requirements.
• Planning and executing the validation of the requirements and verification of the solution.
• The solution design and implementation are developed using Model-Based Design languages (Simulink, embedded MATLAB, and Stateflow), from which C++ code will be generated.

Area of Expertise:
•Embedded Software Development
•FAA certification requirements

Technical Skills:
•Simulink
•Version Control
•Requirements Development
 
Job Number: GNCDEC
Job Location: Long Beach, CA
Rate: Best in Market
Per Diem: Possible
Overtime: Possible
Duration: 6 mon
Start Date: ASAP
Input Date: 03/25/2019
Last Updated: 06/03/2019
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer II

Description:
Position Purpose:
Under minimal supervision, provides Industrial Engineering support through the application of classical and Lean Industrial Engineering principles. Assures assigned projects are accomplished within projected or approved cost.

Unique Skills:
• Capability of performing capacity analysis (ARENA or other software) preferred.

Education and Experience Requirements:
• Bachelor's Degree in Industrial, Manufacturing Engineering or related curriculum or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen (18) months Industrial Engineering, Manufacturing Engineering, Operations Engineering or related technical experience.

Principle Duties and Responsibilities:
• Conduct analysis with area Management and support staff to establish and maintain daily work activities.
• Conduct analysis with area Management, support staff and Material Control to design and maintain part presentation requirements and procedures.
• Identify equipment, machinery, and facilities acquisition including justifications and economic analysis to support operational, Safety and Quality initiatives.
• Development and maintain Tool Box requirements and contents to include tool control, FOD prevention measures tool requirements matched to area tasks.
• Apply 3D print capability to assist in resolution of technical issues (shop aids, Protect the Product, etc.).
• Provide business case analysis in support of projects to include make/buy, MCR, Engineering Changes, Tooling requests.
• Support all Safety, Sustainability and Ergonomic initiatives as required.
• Develop and Implement plant layout, process flow, and material handling techniques.
• Support area Management in generating orders/requests for Tooling including management of tool priorities.
• Investigate, evaluate, and implement facilities expansions, department rearrangements, new technologies and manufacturing techniques, and employee suggestions.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of IE policies and procedures.
• With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
• Develop and maintain work place methods and manpower requirements.
• Assist in the training and development of entry-level industrial engineering personnel.
• As required, aid in development and maintenance of Business Continuity Plan. Perform other duties as assigned.

Other Requirements:
• Proven knowledge of Lean and/or Six Sigma principles.
• Ability to influence across functional disciplines.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Demonstrated ability to operate computerized equipment, such as personal computers, CATIA, etc.
• Lean Specialist certification or higher preferred.
 
Job Number: 24-358
Job Location: Tulsa, OK
Rate: $52.50/hr
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 05/09/2019
Last Updated: 05/31/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer-2,3,4 in WA

Description:
Industrial Engineer

Location: Renton, WA
Duration: 6 months

Job Description:
Ideal candidate has experience on 737 program and with precedence modeling software (Aurora or similar software.) Must also have had shop floor experience

Applies advanced Industrial Engineering concepts, techniques, analysis and decision tools to promote and implement changes in manufacturing, engineering and service operations. Independently develops models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provides summary analysis and metrics for consultation to customers (e.g., management, departments, suppliers). Applies advanced industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements. Researches, designs, develops, improves, and implements processes to enhance schedule performance, lower cost, and improve quality, through the application of advanced Lean and other Industrial Engineering concepts for large scale systems integration and asset utilization. Independently manages, defines, negotiates, and controls the scope, cost, and timing of projects, and performs risk analysis using project management tools (e.g., work break-down structure, precedence network, resource allocation). Ensures project is completed within budget. Utilizes advanced engineering methods (e.g., mathematical models, simulation, statistics) to develop optimal process designs and efficient utilization of resources (e.g., facilities, personnel, materials, equipment) in the creation and validation of products. Analyzes and designs value stream, including capability, capacity (e.g., make/buy, supplier selection, risk analysis, supplier performance), throughput, work flow and logistics (e.g., critical path, lead-time, transportation, factory layout).

Education / Experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

Skill Code:
D26-Mfg Industrial Engrg
 
Job Location: Renton, WA
Per Diem: Split
Duration: 6 Months
Start Date: ASAP
Input Date: 05/30/2019
Last Updated: 08/28/2019
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Infrastructure Engineer

Description:
Title of Position: Infrastructure Engineer

Salary: Negotiable for qualified candidate

Position: Direct Hire, FTE, Full Benefits

Interview process: 2 Phone Screens to Start, followed by a Face-to-Face meeting.

Talent Acquisition company: Nesco Resource

Location: Southfield MI as a base. Candidate will be asked to travel to 6 different plants in the Detroit metro area. Mileage will be paid to the employee. Saginaw, Sterling Heights, Shelby, etc.



Experience: 5 years + as an Engineer, 8 -10 year as a IT Infrastructure professional



Basic Responsibilities: 2nd and 3rd level support of the organization's corporate infrastructure and all of its hardware/software components. Including both design and installation of hardware/software. Strong network experience is a must. The client uses Cisco network/products at their local plants.



Responsibilities include:

Demonstrating ownership of IT systems and processes by taking responsibility for operational availability of a secure, effective and reliable computing environment that meets or exceeds staff and business requirements.

  • Following emerging technologies, standards, and developments within the industry to assist in planning and purchases for increased system capacity to meet the needs of a company growing both in size and in technical needs.

  • Continuously monitoring and evaluating existing IT controls and procedures to ensure all risks are known and mitigated to an acceptable level in both production and non-production environments.

  • Daily support of on-premises platforms running VMware

  • Maintains systems and technology at or above industry standards.

  • Configure and maintain the organization's internal computer network, mainly Cisco Firewalls, Switches and Spam filters.

  • Proactively monitoring server health in a production environment to ensure any failure can be responded to quickly and with minimum downtime

  • Experience working with VMware, Active Directory, GPO's, and O365

  • Providing Tier 2 and 3 level user and hardware support of Windows based network systems


Qualifications:


  • Bachelor's Degree in Computer Science/Computer Engineering/Network Engineering/Information Technology required, Bachelor's preferred (comparable IT certifications will be considered).

  • Minimum of 3-5 years' experience Configuring, managing and troubleshooting firewalls, routers and Switches, knowledge of Cisco firewalls and switches highly desired

  • Knowledge of core IT infrastructure and systems including LAN/WAN networking including routers, switches and firewalls, and SAN storage

  • Strong knowledge of Windows Server environment

  • Knowledge of VMWARE virtualization in server environment

  • Knowledge of Active Directory & GPO's

  • Knowledge of O365

  • Any past experience migrating from on premise infrastructure to IaaS, PaaS, and SaaS model would be a 'plus' but not needed to get the job

  • Backup experience

  • Knowledge of enterprise anti-virus

  • Advanced ability to analyze system logs

  • Ability to work tasks with little supervision or assistance

  • Must consent to a full background check, including a drug screen


Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-19912
Job Location: Southfield, MI
Rate: 85000.0USD/Year
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-06-03 00:00:00.0
Input Date: 05/15/2019
Last Updated: 06/20/2019
Firm Name: NESCO RESOURCE
Attention: Erica Lozon
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Integration Test Engineer

Description:
Must Be Eligible For a Secret Clearance

Test Engineer - Integration.Test Engineer-Integration requires both Software & Hardware skills:

Software: skilled in 'C' using NI LabWindows/CVI, LabView and Test Stand, and interfacing with test equipment. Assignment will include the design, development, integration, testing, and fielding of software for a test set.

Hardware: skilled in Test Equipment and Interface Test Adapter (ITA) design and interfacing with test equipment. Knowledgeable in 'C' using NI TestStand, LabView and/or LabWindows/CVI development environments desired.
 
Job Number: 46069
Job Location: TX
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 06/04/2019
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Intelligent Manufacturing Expert (Aerospace) - China

Description:
Intelligent Manufacturing Expert

Our client, the manufacturing division of a major Chinese aircraft company, are seeking an Intelligent Manufacturing Expert to provide expert advice to its various manufacturing programs. This is based at the modern facility in Shanghai.

Job Description

·Responsible for digitalizational intelligent manufacturing application planning, AI algorighm development, system testing, debugging, maintaining, technical guidance etc.;

·Analyze the trend of intelligent technology, involving intelligent manufacturing software and hardware solutions;

·Responsible for the implementation of enterprise intelligent manufacturing upgrading and management of the production line equipment life cycle;

·Follow up the project progress in time, lead the team to solve the problems that related to site production line, ensure the project is completed on time;

·Responsible for intelligent manufacturing information management and programing.

Qualifications & Experience

·More than 10 years of relevant major work experience in intelligent manufacturing and automation equipment development;

·Familiar with R&D, production, management process in the aeronautical field;

·Familiar with organizational intelligent manufacturing related to equipmental software, hardware technology and organaitional information management software;

·Proficiently program the equipment control system of intelligent manufacturing;

·Lead organization intelligent manufacturing, experienced in intelligent manufacturing and industry robot are preferred;

·Familiar with information system or software development, programmer who are experienced in programming and software developing are preferred;

·Overseas working experience is preferred.

This position will be on a fixed term employment contract basis, with an initial duration of 2-3 years and extendable beyond this. It comes with a generous salary with additional tax-free allowances for accommodation, transport, travel home and healthcare.
 
Job Number: BHJOB28358_69
Job Location: China
Rate: Negotiable
Duration: 2-3 years
Start Date: July2019 onwards
Input Date: 07/04/2019
Firm Name: STRONGFIELD TECHNOLOGIES USA INC
Attention: Adrian Medhurst
Address: 5000 BIRCH ST STE 3000
City, State: NEWPORT BEACH, CA 92660
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Jr. Avionics Systems Engineer

Description:
General Summary:
The Avionics System Engineer will be responsible for the design, development, and integration of the assigned avionics systems for the aircraft.


Duties and Responsibilities:
• Define, plan, and develop complex systems level requirements to support the avionic systems.
• Perform systems level integration activities for aircraft avionic systems including: Control and Display Systems; Navigations Systems; Communication Systems; Surveillance Systems; and Cabin Management Systems
• Interface with suppliers to ensure technical requirements are met to support aircraft development need dates
• Provide technical assistance to production and customer service departments for support of system technical inquires and issue resolution
• Perform system evaluation and analysis to verify the system design compliance with functional requirements
• Coordinate with cross-functional team members to complete assignments/projects as defined and on schedule
• Develop targeted system level enhancements to address customer feedback and product improvement initiatives
• Conduct system lab testing and aircraft functional testing
• Prepare presentations on avionics system design/development status
• Support system analyses for avionic systems
Qualifications


Education, Work Experience, Certification and/or Licensure:
• Bachelors’ degree in Engineering from a four year college or university; preferably in Electrical/Electronics Engineering or Aerospace Engineering
• Minimum of 6 years to a maximum of 20 years’ experience working with integrated aircraft avionic systems in the areas of design engineering, system analysis, and system test


Knowledge, Skills and Abilities:
• Working knowledge of design requirements of 14CFRPart 23
• Proficiency in writing technical documentation and reports involving test data and analysis
• Familiarity with avionics/electrical test laboratories and lab equipment
• Working knowledge of System qualification requirements including DO-160E/F for environmental, DO-178B for software, and DO-254 for complex electronic hardware
• Proficiency in Microsoft Office suite (Word, Excel, Project, PowerPoint is required)
• Proficiency in requirements management tools such as DOORS
• Proficiency in PLM Tools such as TeamCenter and SAP
• Ability to handle complex work assignments
• Ability to work independently and within a multi-functional team environment




The Structures Company, LLC is an AA/EOE.
 
Job Number: 296
Job Location: NC
Rate: $50/Hr.
Per Diem: Yes
Overtime: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 08/06/2019
Last Updated: 08/27/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Loads & Dynamics Engineer

Description:
Loads and Dynamics Engineer
• Support loads event simulation model development and validation of loads criteria for suborbital space missions
• Support pre-flight preparation including review of test limitations, flight test plans and procedures, flight readiness reviews, mission control room support, and post flight analysis
• Works with other engineering groups to ensure proper application of design and loads requirements
• Develop airframe design loads, component loads, fatigue spectra, and environmental specification
• Supports entry into commercial service by ensuring that regulatory and internal company requirements related to loads are met
• Develop standardized analysis and reporting tools
• Perform model updates from data collected during vehicle or component testing and data created with analytical tools
• Develop and maintain loads databases for use in analysis of WK2 and SS2 during all flight phases
• Develop and substantiate rational loads criteria and requirements for unique vehicles with unconventional configurations
• Graduate degree in Aerospace Engineering, and/or equivalent, with minimum of 5 years of experience in external loads and dynamics development
• Experiences in wind-tunnel and flight test aerodynamic and loads model validation
• Experience with full aircraft analysis – transonic required, supersonic and launch vehicle desirable
• Test plan development and data analysis experience a strong plus
• Experience in the conduct of flight test, including familiarity with standard flight test practices and safety processes strong plus.
• Working knowledge of aircraft and space systems and familiarity with relevant aerospace standards (FAA, FAA‐AST etc.)
• Advanced skills with Simulink, MATLAB, Fortran, C, C++, and software development best practices.
• CATIA V5 and NASTRAN experiences preferred.

The Structures Company is an AA/EOE.
 
Job Number: 260
Job Location: CA
Rate: DOE
Per Diem: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 05/21/2019
Last Updated: 07/03/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Logistics Management Analyst

Description:
Location: Fort Benning, FL
Rate: $30.00/HR
Duration: 4 month contract

****MUST be a U.S. Citizen****
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
- Controls the efficient flow of goods, services, and information between points of origin through customer placement in order to meet customer requirements.
- Ensures that customer service and time objectives are achieved within existing financial constraints in order to meet marketing and financial objectives.
- Ensures the execution and continuous improvement of standard logistics processes, such as the replenishment system, data interchange systems, demand management, electronic data systems administration and related functions.
- Builds relationships with strategic customers through logistics initiatives. Integrates learning from customers, competitors, operating entities, distribution, transportation, customer service, other industries, industry groups, and professional training to continuously improve competitive position.


Capabilities Analyst Support:
- Display expert knowledge of Project programs in the preparation of various staff action requirements to be used in presentations, staff planning/working groups and for information papers.
- Develop general knowledge of emerging software systems such as Socialcast, Trello, Defense Ready, or Slack in the event that the organization desires to utilize new systems for project management, planning, or data management processes.
- Work in a small team to focus on small and long term projects, facilitate project management by others, and advise the organization on best practices/solutions to ongoing projects/planning efforts.
- Maintain continuity on projects, developing organizational understanding through graphics, data management, and other forms of communication.
- Communicate and develop relationships with outside organizations to pollinate ideas inside and out of the SOF community.
- Design and resource efforts and solutions through military processes as required.


Education:
- Level 3: BS+6-10 YRS or MS+4-8 YRS
 
Job Number: 11037
Job Location: Fort Benning, GA
Rate: $30.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 4 mos
Input Date: 06/03/2019
Last Updated: 06/17/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Logistics Management Analyst - Clearance GA

Description:
1635-1
Logistics Management Analyst
Work Location: Fort Benning, GA
Status: Open

Qty: 1
Desired Start Date: 6/17/2019
End Date: 10/21/2019

Job Description:
Controls the efficient flow of goods, services, and information between points of origin through customer placement in order to meet customer requirements. Ensures that customer service and time objectives are achieved within existing financial constraints in order to meet marketing and financial objectives. Ensures the execution and continuous improvement of standard logistics processes, such as the replenishment system, data interchange systems, demand management, electronic data systems administration and related functions. Builds relationships with strategic customers through logistics initiatives. Integrates learning from customers, competitors, operating entities, distribution, transportation, customer service, other industries, industry groups, and professional training to continuously improve competitive position.
Capabilities Analyst Support
Display expert knowledge of Project programs in the preparation of various staff action requirements to be used in presentations, staff planning/working groups and for information papers.
Develop general knowledge of emerging software systems such as Socialcast, Trello, Defense Ready, or Slack in the event that the organization desires to utilize new systems for project management, planning, or data management processes.
Work in a small team to focus on small and long term projects, facilitate project management by others, and advise the organization on best practices/solutions to ongoing projects/planning efforts.
Maintain continuity on projects, developing organizational understanding through graphics, data management, and other forms of communication.
Communicate and develop relationships with outside organizations to pollinate ideas inside and out of the SOF community.
Design and resource efforts and solutions through military processes as required.

Level: Level 3: BS+6-10 YRS or MS+4-8 YRS
Pay Rate: $18.00 - $47.50 Hourly
 
Job Number: JE-1635-1S
Job Location: Fort Bennings, GA
Rate: 47.50/hr max
Duration: 4 months +
Input Date: 05/30/2019
Last Updated: 06/20/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Logistics Management Analyst - Clearance KY

Description:
165154
1591-1 Logistics Management Analyst
Work Location: Lexington, KY
Status: Open

Qty: 1
Desired Start Date: 6/10/2019
End Date: 11/11/2019

Job Description:
Controls the efficient flow of goods, services, and information between points of origin through customer placement in order to meet customer requirements. Ensures that customer service and time objectives are achieved within existing financial constraints in order to meet marketing and financial objectives. Ensures the execution and continuous improvement of standard logistics processes, such as the replenishment system, data interchange systems, demand management, electronic data systems administration and related functions. Builds relationships with strategic customers through logistics initiatives. Integrates learning from customers, competitors, operating entities, distribution, transportation, customer service, other industries, industry groups, and professional training to continuously improve competitive position.

Level: Level 2: BS+3-5 YRS or MS+0-3 YRS
Pay Rate: $16.20 - $42.00 Hourly
Soft Skills Leadership Skills No 1 2 - 4 Years
Software Skills MS Excel No 1 4 - 6 Years
Technical Skills Data Entry No 1 1 - 2 Years
 
Job Number: JE-1591-1S
Job Location: Lexington, KY
Rate: 42/hr max
Duration: 5 months
Input Date: 06/07/2019
Last Updated: 06/21/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Engineer

Description:
Description:
Knowledge of air vehicle systems, systems integration, engineering design, the drawing release process, and subsystems/component qualification
Working knowledge and experience integrating various mechanical systems into a composite aircraft.
Familiarity with composite fabrication processes
Review and provide engineering technical disposition of non-conformance notifications related to metallic and composite parts/assemblies
Skilled in “equivalent strength” principles
Participation in product Corrective Action Board (CAR) reviews
Willingness to support weekend shift operations
Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
Is consulted extensively by associates and others as a recognized authority within the field
Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
Has an approach to problem solving, balances technical product cost, and scheduling
Works without appreciable direction; work is reviewed from a long-range perspective for desired results
Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product


Qualifications:
Bachelor's Degree in engineering, Mechanical, Aerospace, or similar engineering discipline or technical related curriculum applicable to the respective job position required. 10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with a bachelors degree. Experience credit considered for related advanced degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.
At least 5 years of relevant industry experience
Experience with CATIA V5 strongly preferred. SOLIDWORKS or equivalent will be considered in lieu of CATIA.
Experienced design (broad based aircraft experience) with knowledge of design manufacturing tolerances for production of components using GD&T
Experience with Product Lifecycle Management tools (PLM software), Requirements management tools and configuration management
Excellent verbal and written communication, excellent computer skills including Microsoft Word, Excel, PowerPoint, and Matlab
Knowledge and experience with AS9100 a plus
Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, DO-160, military (MIL-STD-810) or NASA are highly desired
Experience with manufacturing based ERP systems a plus
Strong team player and ability to work independently with excellent organizational and problem-solving skills
Composite and metal design experience preferred
Understanding of MRB requirements & procedures
Extensive working knowledge of engineering drawings / requirements
NDT/Visual non-conformance disposition expertise
Experience with control & segregation requirements for non-conforming material
Familiarization with records accuracy & completeness (including data codes)
Ability to facilitate inadequate cause & corrective action resolutions
Familiarization with rework vs accept disposition risk assessments
Familiarization with final dispositions & re-submit codes
Experience should include creation of engineering dispositions for non-conformances for pressurized and non
pressurized metallic and non-metallic structures (fuselage, wing, empennage)
Experience should be in a production and/or schedule-driven environment
Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment
Strong written/verbal communication and interpersonal skills
Typically a 9-10 hour work day, with some scheduled weekend support required
Advanced degree in engineering, or related curriculum preferred
The level of technical skill and abilities appropriate for this grade will be established by each discipline

The Structures Company is an AA/EOE.
 
Job Number: 309
Job Location: Mojave, CA
Rate: $65-$70/Hr.
Per Diem: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 08/14/2019
Last Updated: 08/21/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer

Lexington, KY
$27.50/hr
6 month W2 contract
First Shift
*MUST HAVE AN ACTIVE SECRET CLEARANCE*

Job Description:
Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling. . Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance. Adapts machine or equipment design to factory and production conditions.

Responsibilities include close coordination and collaboration with the Product Focus Teams, Factory Material Flow, Tool Services, and Facilities in developing and implementing production readiness in each of the component and assembly areas. May incorporate inspection and test requirements into the production plan. Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality. Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques. Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensures processes and procedures are in compliance with regulations.

Basic Qualifications :
•Knowledge of engineering drawing interpretation and tolerances.
•Demonstrated organizational skills
•Proficient with Microsoft Office suite
•Producibility for manufacturing experience.
•Understanding of configuration control principles
•Experience in writing basic manufacturing planning work instructions
Bachelors degree required

Desired skills:
•Experience with material handling, work flow, and process development of complex assemblies, mechanical details, tooling and mechanical system integration
•Dual discipline engineering experience: mechanical and electrical backgrounds
•Lean six sigma training, i.e. green belt, or black belt certified
•Tool fabrication and assembly experience
•Experience with use of Teamcenter Engineering software package
•Bachelor’s degree from an accredited college in Mechanical, or Electrical Engineering, or equivalent experience/combined education,
 
Job Number: 10864
Job Location: Lexington, KY
Rate: 27.50
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 06/04/2019
Last Updated: 10/01/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer

Lexington, KY
$27.50/hr
6 month W2 contract
First Shift
*MUST HAVE AN ACTIVE SECRET CLEARANCE*

Job Description:
Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling. . Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance. Adapts machine or equipment design to factory and production conditions.

Responsibilities include close coordination and collaboration with the Product Focus Teams, Factory Material Flow, Tool Services, and Facilities in developing and implementing production readiness in each of the component and assembly areas. May incorporate inspection and test requirements into the production plan. Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality. Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques. Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensures processes and procedures are in compliance with regulations.

Basic Qualifications :
•Knowledge of engineering drawing interpretation and tolerances.
•Demonstrated organizational skills
•Proficient with Microsoft Office suite
•Producibility for manufacturing experience.
•Understanding of configuration control principles
•Experience in writing basic manufacturing planning work instructions
Bachelors degree required

Desired skills:
•Experience with material handling, work flow, and process development of complex assemblies, mechanical details, tooling and mechanical system integration
•Dual discipline engineering experience: mechanical and electrical backgrounds
•Lean six sigma training, i.e. green belt, or black belt certified
•Tool fabrication and assembly experience
•Experience with use of Teamcenter Engineering software package
•Bachelor’s degree from an accredited college in Mechanical, or Electrical Engineering, or equivalent experience/combined education,
 
Job Number: 10863
Job Location: Lexington, KY
Rate: 27.50
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 06/04/2019
Last Updated: 08/13/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer

Lexington, KY
$27.50/hr
6 month W2 contract
First Shift
*MUST HAVE AN ACTIVE SECRET CLEARANCE*

Job Description:
Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling. . Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance. Adapts machine or equipment design to factory and production conditions.

Responsibilities include close coordination and collaboration with the Product Focus Teams, Factory Material Flow, Tool Services, and Facilities in developing and implementing production readiness in each of the component and assembly areas. May incorporate inspection and test requirements into the production plan. Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality. Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques. Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensures processes and procedures are in compliance with regulations.

Basic Qualifications :
•Knowledge of engineering drawing interpretation and tolerances.
•Demonstrated organizational skills
•Proficient with Microsoft Office suite
•Producibility for manufacturing experience.
•Understanding of configuration control principles
•Experience in writing basic manufacturing planning work instructions
Bachelors degree required

Desired skills:
•Experience with material handling, work flow, and process development of complex assemblies, mechanical details, tooling and mechanical system integration
•Dual discipline engineering experience: mechanical and electrical backgrounds
•Lean six sigma training, i.e. green belt, or black belt certified
•Tool fabrication and assembly experience
•Experience with use of Teamcenter Engineering software package
•Bachelor’s degree from an accredited college in Mechanical, or Electrical Engineering, or equivalent experience/combined education,
 
Job Number: 10873
Job Location: Lexington, KY
Rate: 27.50
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 06/04/2019
Last Updated: 08/13/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer

Lexington, KY
$27.50/hr
6 month W2 contract
First Shift
*MUST HAVE AN ACTIVE SECRET CLEARANCE*

Job Description:
Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling. . Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance. Adapts machine or equipment design to factory and production conditions.

Responsibilities include close coordination and collaboration with the Product Focus Teams, Factory Material Flow, Tool Services, and Facilities in developing and implementing production readiness in each of the component and assembly areas. May incorporate inspection and test requirements into the production plan. Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality. Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques. Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensures processes and procedures are in compliance with regulations.

Basic Qualifications :
•Knowledge of engineering drawing interpretation and tolerances.
•Demonstrated organizational skills
•Proficient with Microsoft Office suite
•Producibility for manufacturing experience.
•Understanding of configuration control principles
•Experience in writing basic manufacturing planning work instructions
Bachelors degree required

Desired skills:
•Experience with material handling, work flow, and process development of complex assemblies, mechanical details, tooling and mechanical system integration
•Dual discipline engineering experience: mechanical and electrical backgrounds
•Lean six sigma training, i.e. green belt, or black belt certified
•Tool fabrication and assembly experience
•Experience with use of Teamcenter Engineering software package
•Bachelor’s degree from an accredited college in Mechanical, or Electrical Engineering, or equivalent experience/combined education,
 
Job Number: 10865
Job Location: Lexington, KY
Rate: 27.50
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 06/04/2019
Last Updated: 10/01/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer

Windsor Locks, CT
$36.50/hr
1 year W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
This position will be responsible for determining mechanical manufacturing methods for (SLS) hardware and ensuring that the processes are available. Candidate will create manufacturing assembly documentation, concepts tools, provides technical assistance, in order to assemble high quality, high engineered hardware for us in space applications. Candidate must ensure processes and procedures comply with all applicable Environmental, Health and Safety requirements as well as all the applicable quality requirements. Must be able to perform cost estimates, work to schedules, and write procedures and policies.

Must be able to review drawings and concepts and resolve producibility concerns. Candidate must provide technical support to the manufacturing facility as well as to the external suppliers. Will support failure investigations, determine root cause of failure, and implement corrective actions and disposition of non-conforming hardware, all in support of continuous improvement initiatives. Must be able work well in an integrated product development/ design environment. Candidate will present to senior management on various topics, be involved with, and implement additional initiatives such as ACE, Process Certification, Manufacturing Process Reviews, Lean Manufacturing and EH&S projects. Candidate must possess a positive attitude and be able communicate well with staff, IPD teams & management.

The job involves working on the manufacture of complex mechanical systems, manufacturing of components such as, heat exchangers, pumps, fans, accumulators and other hardware related with life support systems.

Education / Certifications

• Bachelors of Science in Engineering or Technology, MBA or an advanced Engineering degree is desired.

Experience/Qualifications
• Candidate must have 5+ years of experience working on the manufacture of complex mechanical systems. Desired experience should include working on the manufacturing of components such as, heat exchangers, pumps, fans, & accumulators.
• Candidate must have working knowledge of Microsoft Windows environment and experience in using any type of publishing software. Familiarity with a modeling and/or design package such as ProE, Creo, or CAD is desired.
Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing, is desirable.
Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable.
Experience with a MRP (Manufacturing Resource Planning) system is desirable.
 
Job Number: 11033
Job Location: Windsor Locks, CT
Rate: 36.50
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 05/30/2019
Last Updated: 07/17/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer

Windsor Locks, CT
$48.50/hr
1 year W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
This position will be responsible for determining mechanical manufacturing methods for (SLS) hardware and ensuring that the processes are available. Candidate will create manufacturing assembly documentation, concepts tools, provides technical assistance, in order to assemble high quality, high engineered hardware for us in space applications. Candidate must ensure processes and procedures comply with all applicable Environmental, Health and Safety requirements as well as all the applicable quality requirements. Must be able to perform cost estimates, work to schedules, and write procedures and policies.

Must be able to review drawings and concepts and resolve producibility concerns. Candidate must provide technical support to the manufacturing facility as well as to the external suppliers. Will support failure investigations, determine root cause of failure, and implement corrective actions and disposition of non-conforming hardware, all in support of continuous improvement initiatives. Must be able work well in an integrated product development/ design environment. Candidate will present to senior management on various topics, be involved with, and implement additional initiatives such as ACE, Process Certification, Manufacturing Process Reviews, Lean Manufacturing and EH&S projects. Candidate must possess a positive attitude and be able communicate well with staff, IPD teams & management.

The Manufacturing Engineer position requires a Bachelors of Science in Engineering or Technology, MBA or an advanced Engineering degree is desired. Candidate must have 10+ year’s of experience working on the manufacture of complex mechanical systems.

Desired experience should include working on the manufacturing of components such as, heat exchangers, pumps, fans, & accumulators.

Candidate must have working knowledge of Microsoft Windows environment and experience in using any type of Publishing Software. Familiarity with a modeling and/or design package such as ProE, Creo, or CAD is desired. Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing, is desirable. Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable. Experience with a MRP (Manufacturing Resource Planning) system is desirable.
 
Job Number: 11025
Job Location: Windsor Locks, CT
Rate: 48.50
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 05/29/2019
Last Updated: 06/17/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer

Lexington, KY
$DOE
6 month W2 contract
First Shift
*MUST HAVE AN ACTIVE SECRET CLEARANCE*

Job Description:
Works under general supervision to provide solutions to a variety of technical problems of moderate scope and complexity. Work is reviewed for soundness of technical judgment and adequacy. Works proficiently in a production environment, reading technical documents, supporting process reviews, and communicating at multiple levels within the organization. Exhibits strong interpersonal and communication skills, both oral and written.

• Primary responsibilities generating and updating CNC Programs.
• Provides manufacturing floor support for multiple Special Operations Forces platforms.
• Provides technical support for manufacturing personnel and establishing special processes.
• Develops and implements solutions to complex technical problems from design of concept through manufacturing and integration.
• Reviews engineering designs for producibility.
• Develops/optimizes manufacturing processes.
• Identifying tooling requirements.
• Interfaces and coordinates with Design Engineering, Production Control, Quality, and Production

Basic Qualifications :
• Knowledge of GibbsCam and machining principles
• Knowledge of engineering drawing interpretation and tolerances.
• Demonstrated organizational skills
• Proficient with MS Office suite
• Experience with Development of work centers, lead times, routings, and manufacturing bill of materials.
• Competency in the review of specifications / processes and shop floor liaison support.
• Producibility for manufacturing experience.

Desired skills:
• Experience working in an upgrade/retrofit shop environment
• Experience with Teamcenter and Jobscope Engineering software packages
• Tool design experience
• Knowledge of Lean Manufacturing concepts & techniques
 
Job Number: 10861
Job Location: Lexington, KY
Rate: 40-50
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 04/30/2019
Last Updated: 08/08/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Location: Windsor Locks, CT
Rate: $48.50/HR
Duration: 1 year contract
Per Diem Split: No

****MUST be a U.S. Citizen****
****MUST have an Bachelor's Degree****

Job Description:
- This position will be responsible for determining mechanical manufacturing methods for (SLS) hardware and ensuring that the processes are available.
- Candidate will create manufacturing assembly documentation, concepts tools, provides technical assistance, in order to assemble high quality, high engineered hardware for us in space applications.
- Candidate must ensure processes and procedures comply with all applicable Environmental, Health and Safety requirements as well as all the applicable quality requirements.
- Must be able to perform cost estimates, work to schedules, and write procedures and policies.
- Must be able to review drawings and concepts and resolve producibility concerns.
- Candidate must provide technical support to the manufacturing facility as well as to the external suppliers.
- Will support failure investigations, determine root cause of failure, and implement corrective actions and disposition of non-conforming hardware, all in support of continuous improvement initiatives.
- Must be able work well in an integrated product development/ design environment.
- Candidate will present to senior management on various topics, be involved with, and implement additional initiatives such as ACE, Process Certification, Manufacturing Process Reviews, Lean Manufacturing and EH&S projects.
- Candidate must possess a positive attitude and be able communicate well with staff, IPD teams & management.
- The job involves working on the manufacture of complex mechanical systems, manufacturing of components such as, heat exchangers, pumps, fans, accumulators and other hardware related with life support systems.

Education / Certifications:
- Bachelors of Science in Engineering or Technology, MBA or an advanced Engineering degree is required.

Experience/Qualifications:
- Candidate must have 10+ years of experience working on the manufacture of complex mechanical systems.
- Desired experience should include working on the manufacturing of components such as, heat exchangers, pumps, fans, & accumulators.
- Candidate must have working knowledge of Microsoft Windows environment and experience in using any type of publishing software.
- Familiarity with a modeling and/or design package such as ProE, Creo, or CAD is desired.
- Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing, is desirable.
- Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable.
- Experience with a MRP (Manufacturing Resource Planning) system is desirable.
 
Job Number: 10853
Job Location: Windsor Locks, CT
Rate: $48.50/HR
Per Diem: No
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 06/27/2019
Last Updated: 07/10/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer

Windsor Locks, CT
$25/hr
12 month W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
This position will be responsible for determining mechanical manufacturing methods for (SLS) hardware and ensuring that the processes are available. Candidate will create manufacturing assembly documentation, concepts tools, provides technical assistance, in order to assemble high quality, high engineered hardware for us in space applications. Candidate must ensure processes and procedures comply with all applicable Environmental, Health and Safety requirements as well as all the applicable quality requirements. Must be able to perform cost estimates, work to schedules, and write procedures and policies. Must be able to review drawings and concepts and resolve producibility concerns. Candidate must provide technical support to the manufacturing facility as well as to the external suppliers. Will support failure investigations, determine root cause of failure, and implement corrective actions and disposition of non-conforming hardware, all in support of continuous improvement initiatives. Must be able work well in an integrated product development/ design environment. Candidate will present to senior management on various topics, be involved with, and implement additional initiatives such as ACE, Process Certification, Manufacturing Process Reviews, Lean Manufacturing and EH&S projects. Candidate must possess a positive attitude and be able communicate well with staff, IPD teams & management.
The job involves working on the manufacture of complex mechanical systems, manufacturing of components such as, heat exchangers, pumps, fans, accumulators and other hardware related with life support systems.

Education / Certifications
• Bachelors of Science in Engineering or Technology, MBA or an advanced Engineering degree is desired.

Experience/Qualifications
• Candidate must have 10+ years of experience working on the manufacture of complex mechanical systems. Desired experience should include working on the manufacturing of components such as, heat exchangers, pumps, fans, & accumulators.
• Candidate must have working knowledge of Microsoft Windows environment and experience in using any type of publishing software. Familiarity with a modeling and/or design package such as ProE, Creo, or CAD is desired.
-Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing, is desirable. Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable.
-Experience with a MRP (Manufacturing Resource Planning) system is desirable.
• US Person is required
 
Job Number: 10732
Job Location: Windsor Locks, CT
Rate: 25.00
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 04/02/2019
Last Updated: 08/13/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer

Windsor Locks, CT
$36.50/hr
1 year W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
This position will be responsible for determining mechanical manufacturing methods for (SLS) hardware and ensuring that the processes are available. Candidate will create manufacturing assembly documentation, concepts tools, provides technical assistance, in order to assemble high quality, high engineered hardware for us in space applications. Candidate must ensure processes and procedures comply with all applicable Environmental, Health and Safety requirements as well as all the applicable quality requirements. Must be able to perform cost estimates, work to schedules, and write procedures and policies.

Must be able to review drawings and concepts and resolve producibility concerns. Candidate must provide technical support to the manufacturing facility as well as to the external suppliers. Will support failure investigations, determine root cause of failure, and implement corrective actions and disposition of non-conforming hardware, all in support of continuous improvement initiatives. Must be able work well in an integrated product development/ design environment. Candidate will present to senior management on various topics, be involved with, and implement additional initiatives such as ACE, Process Certification, Manufacturing Process Reviews, Lean Manufacturing and EH&S projects. Candidate must possess a positive attitude and be able communicate well with staff, IPD teams & management.

The job involves working on the manufacture of complex mechanical systems, manufacturing of components such as, heat exchangers, pumps, fans, accumulators and other hardware related with life support systems.

Education / Certifications

• Bachelors of Science in Engineering or Technology, MBA or an advanced Engineering degree is desired.

Experience/Qualifications
• Candidate must have 5+ years of experience working on the manufacture of complex mechanical systems. Desired experience should include working on the manufacturing of components such as, heat exchangers, pumps, fans, & accumulators.
• Candidate must have working knowledge of Microsoft Windows environment and experience in using any type of publishing software. Familiarity with a modeling and/or design package such as ProE, Creo, or CAD is desired.
Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing, is desirable.
Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable.
Experience with a MRP (Manufacturing Resource Planning) system is desirable.
 
Job Number: 10696
Job Location: Windsor Locks, CT
Rate: 36.50
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 03/26/2019
Last Updated: 06/25/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer (Composites)

Description:
• Exposure to Composite manufacturing processes and tools such as clean room layup techniques, Autoclaves, Gerber, CNC machining, NDT inspection methods and/or experience troubleshooting fabrication issues are highly desirable.
• Experience with SharePoint/SAP/SOLUMINA/Majestic Systems (TruLASER,TruNEST) are preferred.

Requirements:
• Proven knowledge of Lean and/or Six Sigma principles.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc.
• Lean Six Sigma Greenbelt Certification or higher preferred.

Education and Experience Requirements:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen months Manufacturing Engineering, planning, or related technical experience.

Essential Functions:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform producibility studies from engineering drawings.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• Utilize CADAM/CATIA data and nesting software to generate flat patterns, Master Models, NC data, and ply nests to meet Engineering and Manufacturing requirements.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
 
Job Number: 24-359
Job Location: Savannah, GA
Rate: $52.50
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 07/02/2019
Last Updated: 07/22/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer (Level 3 and 4)- Multiple locations

Description:
Manufacturing Engineer 3 and 4

Location: Ridley Park, PA
Duration: 6+ months

Description:
Develops and implements production and tooling methodologies. Participates on Integrated Product Teams (IPTs) to integrate technical solutions across multiple disciplines. Develops, identifies and implements conceptual designs and maintains the program architecture for build. Leads and implements manufacturing plans. Conducts producibility and variation analyses to ensure that manufacturing process capability matches requirements. Assists in providing producibility information for inclusion in project plans and helps document producibility best practices. Analyzes design/build concepts to evaluate producible design/build definitions. Resolves technical problems of significant impact to performance, cost or schedule. Coordinates and implements new engineering principles, theories, advanced technologies and concepts. Validates and ensures production readiness of solutions to complex problems. Implements lean principles and technologies.

Education / Experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

Additional Comments:
The following skills are preferred and the level is intermediate.
MES - (SAP Complex Assy Solutions), Teamcenter (Siemens PLM Software), Assy and Integration, Composite Fabrication, Metal Bond, Model Based Instructions (MBI) Authoring, Tooling & Indexing, Wire & Equipment Installation, Sheet Metal/Flat Pattern

Skill Code: 66R-Assembly and Installation
 
Job Number: 17-12923
Job Location: Ridley Park, PA
Rate: Open
Per Diem: Yes
Overtime: Possible
Duration: 6 months
Start Date: Asap
Input Date: 05/24/2019
Last Updated: 08/28/2019
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer - Clearance KY

Description:
1546-1
Manufacturing Engineer
Work Location: Lexington, KY
Status: Open

Qty: 1
Desired Start Date: 6/3/2019
End Date: 11/22/2019

Job Description:
Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling. . Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance. Adapts machine or equipment design to factory and production conditions. Responsibilities include close coordination and collaboration with the Product Focus Teams, Factory Material Flow, Tool Services, and Facilities in developing and implementing production readiness in each of the component and assembly areas. May incorporate inspection and test requirements into the production plan. Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality. Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques. Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensures processes and procedures are in compliance with regulations.

*Basic Qualifications :
•Knowledge of engineering drawing interpretation and tolerances.
•Demonstrated organizational skills
•Proficient with Microsoft Office suite
•Producibility for manufacturing experience.
•Understanding of configuration control principles
•Experience in writing basic manufacturing planning work instructions
Desired skills :
•Experience with material handling, work flow, and process development of complex assemblies, mechanical details, tooling and mechanical system integration
•Dual discipline engineering experience: mechanical and electrical backgrounds
•Lean six sigma training, i.e. green belt, or black belt certified
•Tool fabrication and assembly experience
•Experience with use of Teamcenter Engineering software package
•Bachelor’s degree from an accredited college in Mechanical, or Electrical Engineering, or equivalent experience/combined education,
Rate Details

Level: Level 1: BS+0-2 YRS
Pay Rate: $15.00 - $50.00 Hourly
 
Job Number: JE-1546-1S
Job Location: Lexington, KY
Rate: 50/hr max
Per Diem: no
Duration: 6 months
Input Date: 06/05/2019
Last Updated: 08/19/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer - Clearance KY

Description:
1549-1
Manufacturing Engineer
Work Location: Lexington, KY
Status: Open
Qty: 1
Desired Start Date: 5/14/2019
End Date: 11/2/2019

Job Description:
Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling. Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance. Adapts machine or equipment design to factory and production conditions. Responsibilities include close coordination and collaboration with the Product Focus Teams, Factory Material Flow, Tool Services, and Facilities in developing and implementing production readiness in each of the component and assembly areas. May incorporate inspection and test requirements into the production plan. Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality. Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques. Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensures processes and procedures are in compliance with regulations.

*Basic Qualifications :
•Knowledge of engineering drawing interpretation and tolerances.
•Demonstrated organizational skills
•Proficient with Microsoft Office suite
•Producibility for manufacturing experience.
•Understanding of configuration control principles
•Experience in writing basic manufacturing planning work instructions

Desired skills :
•Experience with material handling, work flow, and process development of complex assemblies, mechanical details, tooling and mechanical system integration
•Dual discipline engineering experience: mechanical and electrical backgrounds
•Lean six sigma training, i.e. green belt, or black belt certified
•Tool fabrication and assembly experience
•Experience with use of Teamcenter Engineering software package
•Bachelor’s degree from an accredited college in Mechanical, or Electrical Engineering, or equivalent experience/combined education,

Level: Level 1: BS+0-2 YRS
Pay Rate: $15.00 - $50.00 Hourly
 
Job Number: JE-1549-1S
Job Location: Lexington, KY
Rate: 50/hr max
Duration: 6 months
Input Date: 06/05/2019
Last Updated: 08/19/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer - Clearance KY

Description:
1548-1
Manufacturing Engineer
Work Location: Lexington, KY
Status: Open
Qty: 2
Desired Start Date: 5/14/2019
End Date: 11/2/2019

Job Description:
Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling. . Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance. Adapts machine or equipment design to factory and production conditions. Responsibilities include close coordination and collaboration with the Product Focus Teams, Factory Material Flow, Tool Services, and Facilities in developing and implementing production readiness in each of the component and assembly areas. May incorporate inspection and test requirements into the production plan. Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality. Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques. Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensures processes and procedures are in compliance with regulations.

*Basic Qualifications:
•Knowledge of engineering drawing interpretation and tolerances.
•Demonstrated organizational skills
•Proficient with Microsoft Office suite
•Producibility for manufacturing experience.
•Understanding of configuration control principles
•Experience in writing basic manufacturing planning work instructions
Desired skills :
•Experience with material handling, work flow, and process development of complex assemblies, mechanical details, tooling and mechanical system integration
•Dual discipline engineering experience: mechanical and electrical backgrounds
•Lean six sigma training, i.e. green belt, or black belt certified
•Tool fabrication and assembly experience
•Experience with use of Teamcenter Engineering software package
•Bachelor’s degree from an accredited college in Mechanical, or Electrical Engineering, or equivalent experience/combined education

Level: Level 1: BS+0-2 YRS
Pay Rate: $15.00 - $50.00 Hourly
 
Job Number: JE-1548-1S
Job Location: Lexington, KY
Rate: 50/hr max
Duration: 6 months
Input Date: 10/15/2019
Last Updated: 01/20/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer - Clearance KY

Description:
1538-1, 1546-1, 1547-1, 1548-1 1549-1 Manufacturing Engineer
Work Location: Lexington, KY
Status: Open

Qty: 1
Desired Start Date: 5/20/2019
End Date: 11/22/2019

Job Description:
Works under general supervision to provide solutions to a variety of technical problems of moderate scope and complexity. Work is reviewed for soundness of technical judgment and adequacy. Works proficiently in a production environment, reading technical documents, supporting process reviews, and communicating at multiple levels within the organization. Exhibits strong interpersonal and communication skills, both oral and written.

• Primary responsibilities generating and updating CNC Programs.
• Provides manufacturing floor support for multiple Special Operations Forces platforms.
• Provides technical support for manufacturing personnel and establishing special processes.
• Develops and implements solutions to complex technical problems from design of concept through manufacturing and integration.
• Reviews engineering designs for producibility.
• Develops/optimizes manufacturing processes.
• Identifying tooling requirements.
• Interfaces and coordinates with Design Engineering, Production Control, Quality, and Production

Basic Qualifications:
• Knowledge of GibbsCam and machining principles
• Knowledge of engineering drawing interpretation and tolerances.
• Demonstrated organizational skills
• Proficient with MS Office suite
• Experience with Development of work centers, lead times, routings, and manufacturing bill of materials.
• Competency in the review of specifications / processes and shop floor liaison support.
• Producibility for manufacturing experience.

Desired skills:
• Experience working in an upgrade/retrofit shop environment
• Experience with Teamcenter and Jobscope Engineering software packages
• Tool design experience
• Knowledge of Lean Manufacturing concepts & techniques

Level: Level 2: BS+3-5 YRS or MS+0-3 YRS
Pay Rate: $50.00 Hourly
 
Job Number: JE-1538-1S
Job Location: Lexington, KY
Rate: 50/hr max
Duration: 6 months
Input Date: 05/01/2019
Last Updated: 08/23/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $50.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
- Preferred Experience in a Manufacturing or Mechanical Environment.
- Should have good communication and customer satisfaction skills.
- Required Experience with ERP or Manufacturing Planning Software and Microsoft Office Software.
- Preferred Manufacturing Planning experience.

Other Requirements:
1. Proven knowledge of Lean and/or Six Sigma principles.
2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
4. Lean Six Sigma Greenbelt Certification or higher preferred.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.
 
Job Number: 9832
Job Location: Savannah, GA
Rate: $50.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/19/2019
Last Updated: 06/07/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II (Electrical Planning)

Description:
• Experience in Electrical Planning, Electrical Floor Support, Mechanical System Floor Support
• Candidates must have experience with Catia V5. Experience with Solumina and SAP is preferred.
• Candidates must possess proven knowledge of aircraft systems and structural assemblies/installations.

Principal Duties And Responsibilities:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform producibility studies from engineering drawings.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• Utilize CADAM/CATIA data and nesting software to generate flat patterns, Master Models, NC data, and ply nests to meet Engineering and Manufacturing requirements.
• With minimal supervision, lead/coordinate the implementation of projects between multiple organizations
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Support all Safety, Sustainability and Ergonomic Initiatives.
• Aid in development and maintenance of Business Continuity Plan.

Experience/Education:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen months Manufacturing Engineering, planning, or related technical experience.
 
Job Number: 24-019
Job Location: Savannah, GA
Rate: $52.50
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 06/18/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer- Wire Harness (280)

Description:
*This is a 9-12 month, full time contract position located in Ocala, FL*



We are hiring for an electronics circuit card industry process or manufacturing engineer who will be developing manufacturing work / tooling instructions, CCA builds and tooling in order to build circuit cards and cable harnesses in a production environment.



Candidate will develop and improve process instructions, route cards, tooling, methods, and processes necessary to meet our production quality, delivery, and cost objectives. Will work closely with assemblers, testers, and inspectors as well as with design engineering to solve a variety of simple to complex manufacturing problems.



Required:
*7 years’ experience in circuit card manufacturing facility, as a process, manufacturing or methods engineer working on cable or wire harness assemblies.

*Hands on experience in either circuit card or Cable and Harness build, tooling development and work instruction.

*Able to supervise and train to production workers

*Experienced with SAP (or similar ERP/MRP package)
*4 year engineering degree or over 12 years experience without degree



Pluses:

*Electronic, packaging design, and MRS knowledge

*Design software experience, preferably Creo, or similar tool.
*LEAN manufacturing understanding
 
Job Number: 280
Job Location: Ocala, FL
Per Diem: yes split
Duration: 9 months
Input Date: 06/26/2019
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Master Planner TX

Description:
Master Planner
Work Location: Fort Worth, TX
Status: Open

Qty: 2
Desired Start Date: 4/23/2019
End Date: 4/23/2020

Job Description:
This position supports the Planning Implementation Development and Analysis Functional team in the development and delivery of Program Planning capabilities to Aero Line of Business programs and projects. Responsibilities include the development, deployment, and implementation of processes, training, and tools in support of the Program Planning discipline. This position will be an active participant in the evaluation of program planning/scheduling products and practices, and will be instrumental in the resultant remediation activities upon identification of gaps. One-on-one mentoring of planners, formal process and tools training, and leadership of team meetings are techniques that will be employed by this position in order to develop bench strength among the planning community, and to improve planning work products. Demonstrate strong communication and interpersonal skills to work in a team environment. Possess ability to prepare status reports, metrics and make presentations as required. Must be outgoing, energetic, self-starter and have demonstrated Program Planning and Scheduling hands on experience. Additional responsibilities will be assigned as required.

Highly Desired Skills:
Microsoft Project and/or Open Plan Experience, Milestones Professional Experience, Proven Planning and Scheduling Expertise, Demonstrated Earned Value Management System (EVMS) Experience, DCMA Health Metrics/Data Driven Metrics Knowledge.

Aerospace/Aviation, Program Master Planning/Scheduling Experience (This is not a Maintenance Scheduler position). Candidate must be flexible to work on a variety of assignments and be able to work with other planners/schedulers and internal customer in a fast pace and changing environment.

Level 3: BS+9-15 YRS or MS+7-13 YRS
Pay Rate: $47.78 Hourly

Soft Skills Ability to meet deadlines Yes 1 6 + Years
Soft Skills Analytical Ability Yes 1 6 + Years
Software Skills MS Excel Advanced Yes 1 6 + Years
Technical Skills Earned Value Analysis Yes 1 6 + Years
 
Job Number: JE-1473-1ATO
Job Location: Fort Worth, TX
Rate: 47.78/hr max
Per Diem: no
Duration: 12 months
Input Date: 05/02/2019
Last Updated: 06/18/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Must Be Eligible for a Secret Clearance.

10 years of equivalent experience, and 6-8 years of Computer Aided Design software experience using SolidWorks Software. Candidate must be capable of creating and interpreting detail, assembly, and installation type drawings, and have knowledge of the concept of tolerance analysis and Geometric Dimensioning and Tolerancing (GD&T).
 
Job Number: 46180
Job Location: TX
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 06/03/2019
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Location: Lexington, KY
Rate: $50.00 - $63.00/HR
Duration: 6 month contract
Overtime: Possible (x1.5)
Per Diem Split: Yes

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

Job Description:
- Designs and oversee the plant or manufacturing systems, fabrication, installation, modification, maintenance, and repair of mechanical equipment such as conveyor systems, production machinery, and other material-handling equipment used in fabrication, assembly, and other production functions; analyzes engineering sketches, specifications and related data, and drawings to determine design factors such as size, shape, and arrangement of parts; oversees the construction of machine and subassemblies considering such specifications as gear ratios, bearing loads, and direction of moving parts; compiles and analyzes test data to determine effect of design on machines in relation to factors such as temperature, pressures, speed, horsepower, and fuel consumption.

Basic Qualifications:
- Experience with 3D parametric modeling and drafting in CATIA or similar tool
- Experience with Teamcenter or similar PDM/PLM software tool
- Demonstrated success working in a team-based environment to meet objectives
- Strong communication and presentation skills, both oral and written
- Experience with Microsoft office suite (Word, Excel, and PowerPoint)
- BS in Mechanical Engineering from an accredited university

Desired skills:
- Familiarity with C-130 or other similar fixed wing or military aircraft
- Experience working in an aerospace environment with exposure to DoD customers
- Experience with ANSI/ASME Y14.100 or similar design and drafting standards
- Familiarity or experience with ASME Y14.5 Geometric Dimensioning and Tolerancing (GD&T)
- Experience designing, or working with, sheet metal and machined components
- Experience with creation, review, and approval of engineering change documentation
- Experience with an engineering change process and/or configuration control process

Education:
- Level 2: BS+3-5 YRS or MS+0-3 YRS
 
Job Number: 10906
Job Location: Lexington, KY
Rate: $50.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 05/06/2019
Last Updated: 07/10/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer - Clearance KY

Description:
1557-1 Mechanical Engineer
Work Location: Lexington, KY
Status: Open

Qty: 3
Desired Start Date: 6/3/2019
End Date: 12/31/2019

Job Description:
Designs and oversees the plant or manufacturing systems, fabrication, installation, modification, maintenance, and repair of mechanical equipment such as conveyor systems, production machinery, and other material-handling equipment used in fabrication, assembly, and other production functions; analyzes engineering sketches, specifications and related data, and drawings to determine design factors such as size, shape, and arrangement of parts; oversees the construction of machine and subassemblies considering such specifications as gear ratios, bearing loads, and direction of moving parts; compiles and analyzes test data to determine effect of design on machines in relation to factors such as temperature, pressures, speed, horsepower, and fuel consumption.

Basic Qualifications:
• Experience with 3D parametric modeling and drafting in CATIA or similar tool
• Experience with Teamcenter or similar PDM/PLM software tool
• Demonstrated success working in a team-based environment to meet objectives
• Strong communication and presentation skills, both oral and written
• Experience with Microsoft office suite (Word, Excel, PowerPoint)
• BS in Mechanical Engineering from an accredited university
Comments for Suppliers: Desired skills:
• Familiarity with C-130 or other similar fixed wing or military aircraft
• Experience working in an aerospace environment with exposure to DoD customers
• Experience with ANSI/ASME Y14.100 or similar design and drafting standards
• Familiarity or experience with ASME Y14.5 Geometric Dimensioning and Tolerancing (GD&T)
• Experience designing, or working with, sheet metal and machined components
• Experience with creation, review, and approval of engineering change documentation
• Experience with an engineering change process and/or configuration control process

Level: Level 2: BS+3-5 YRS or MS+0-3 YRS
Pay Rate: $22.00 - $63.00 Hourly
 
Job Number: JE-1557-1S
Job Location: Lexington, KY
Rate: 63/hr max
Duration: 6 months
Input Date: 05/07/2019
Last Updated: 07/11/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Manufacturing Engineer

Description:
This position will be responsible for determining Mechanical Manufacturing methods for (SLS) hardware and ensuring that the processes are available.

The candidate will:
• create manufacturing assembly documentation,
• concepts tools,
• provide technical assistance, in order to assemble high quality, high engineered hardware for Space applications.

The candidate must:
• ensure processes and procedures comply with all applicable Environmental, Health and Safety requirements as well as all the applicable quality requirements.
• be able to perform cost estimates, work to schedules, and write procedures and policies.
• be able to review drawings and concepts and resolve producibility concerns.
• provide technical support to the manufacturing facility as well as to the external suppliers.
• support failure investigations,
• determine root cause of failure and implement corrective actions and disposition of non-conforming hardware, all in support of continuous improvement initiatives.
• be able work well in an integrated product development/ design environment.
• present to senior management on various topics
• be involved with, and implement additional initiatives such as ACE, Process Certification, Manufacturing Process Reviews, Lean Manufacturing and EH&S projects.
• must possess a positive attitude and be able communicate well with staff, IPD teams & management.

The job involves working on the manufacture of complex mechanical systems, manufacturing of components such as, heat exchangers, pumps, fans, accumulators and other hardware related with life support systems.

Education / Certifications
• Bachelor of Science in Engineering or Technology, MBA or an advanced Engineering degree is desired.

Required Experience/Qualifications
• Minimum 1 year of experience.
• Candidate must have working knowledge of Microsoft Windows environment and experience in using any type of publishing software.

Desired Experience/Qualifications
• Working on the manufacturing of components such as, heat exchangers, pumps, fans, & accumulators.
• Familiarity with a modeling and/or design package such as ProE, Creo, or CAD
• Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing
• Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools
• Experience with an MRP (Manufacturing Resource Planning) system
 
Job Number: 1910102673
Job Location: Windsor Locks, CT
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 06/05/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Manufacturing Engineer (10+ years experience)

Description:
This position will be responsible for determining Mechanical Manufacturing methods for (SLS) Space hardware and ensure that the processes are available.

The Candidate will create manufacturing assembly documentation, concept tools, provide technical assistance, in order to assemble high quality, high engineered hardware for us in space applications.

The Candidate must:
• ensure processes and procedures comply with all applicable Environmental, Health and Safety requirements as well as all the applicable quality requirements.
• be able to perform cost estimates, work to schedules, and write procedures and policies.
• be able to review drawings and concepts and resolve producibility concerns.
• provide technical support to the manufacturing facility as well as to the external suppliers.
• support failure investigations,
• determine root cause of failure, and
• implement corrective actions and disposition of non-conforming hardware, all in support of continuous improvement initiatives.
• be able work well in an integrated product development/ design environment.
• present to senior management on various topics,
• be involved with, and implement additional initiatives such as ACE, Process Certification, Manufacturing Process Reviews, Lean Manufacturing and EH&S projects.
• possess a positive attitude and be able communicate well with staff, IPD teams & management.

The job involves working on the manufacture of complex mechanical systems, manufacturing of components such as, heat exchangers, pumps, fans, accumulators and other hardware related with life support systems.

Education / Certifications
• Bachelor of Science in Engineering or Technology, MBA or an advanced Engineering degree is desired.

Experience/Qualifications
• Candidate must have 10+ years of experience working on the manufacture of complex mechanical systems.
• Candidate must have working knowledge of Microsoft Windows environment and experience in using any type of publishing software
• Candidate must be a US person

Desired experience
• Working on the manufacturing of components such as, heat exchangers, pumps, fans, & accumulators.
• Familiarity with a modeling and/or design package such as ProE, Creo, or CAD
• Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing.
• Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools
• Experience with an MRP (Manufacturing Resource Planning) system
 
Job Number: 1910101258
Job Location: Windsor Locks, CT
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 07/10/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Manufacturing Engineer (5+ year experience)

Description:
This position will be responsible for determining Mechanical Manufacturing methods for (SLS) hardware and ensuring that the processes are available.

The Candidate:
• Will create manufacturing assembly documentation, concepts tools, provides technical assistance, in order to assemble high quality, high engineered hardware for us in space applications.
• Must ensure processes and procedures comply with all applicable Environmental, Health and Safety requirements as well as all the applicable quality requirements.
• Must be able to perform cost estimates, work to schedules, and write procedures and policies.
• Must be able to review drawings and concepts and resolve producibility concerns.
• Must provide technical support to the manufacturing facility as well as to the external suppliers.
• Will support failure investigations, determine root cause of failure, and implement corrective actions and disposition of non-conforming hardware, all in support of continuous improvement initiatives.
• Must be able work well in an integrated product development/ design environment.
• Will present to senior management on various topics, be involved with, and implement additional initiatives such as ACE, Process Certification, Manufacturing Process Reviews, Lean Manufacturing and EH&S projects.
• Must possess a positive attitude and be able communicate well with staff, IPD teams & management.

The job involves working on the manufacture of complex mechanical systems, manufacturing of components such as, heat exchangers, pumps, fans, accumulators and other hardware related with life support systems.

Education / Certifications
Bachelors of Science in Engineering or Technology, MBA or an advanced Engineering degree is desired.

Required Experience/Qualifications
• Candidate must have 5+ years of experience working on the manufacture of complex mechanical systems.
• Candidate must have working knowledge of Microsoft Windows environment and experience in using any type of publishing software.

Desired Experience/Qualifications
• Working on the manufacturing of components such as, heat exchangers, pumps, fans, & accumulators.
• Familiarity with a modeling and/or design package such as ProE, Creo, or CAD is desired.
• Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing
• Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools
• Experience with an MRP (Manufacturing Resource Planning) system
 
Job Number: 1910100042
Job Location: Windsor Locks, CT
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 05/28/2019
Last Updated: 06/05/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical System Design & Analysis Engineer

Description:
Supports the development and documentation of mechanical and fluid system and thermal environment requirements to establish the system design. Performs verification and validation of component level requirements to approved processes and tools. Supports the development, maintenance or modification of system, component and installation designs/proposals to provide design documentation to downstream groups. Performs and documents analyses to validate and verify systems and components meet requirements and specifications. Supports system components'' designs/proposals standards to provide installation and detail documentation. Works with supplier for identification and review of supplier design changes for acceptability and impact. Trains others. Works under general direction.
Skills:
Software:DOORS
Technical Skills:
•Change Control
•Requirements Development
•Supplier Interaction
 
Job Number: 1113-2018
Job Location: Everett, WA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6 mon
Start Date: ASAP
Input Date: 03/25/2019
Last Updated: 06/03/2019
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NC Machine Maintenance Expert - China.

Description:
Our Aerospace Client in China requires an NC Machine Maintenance Expert, to work with them in country.

Job Role:

The ideal candidate will be responsible for production line development, system testing, debugging, maintaining and providing technical guidance.

They will analyse the trend of intelligent technology, involving intelligent manufacturing software and hardware solutions.
They will be responsible for the implementation of enterprise intelligent manufacturing upgrading and management of the production line equipment life cycle.

Following up the project progress in time, leading the team to solve the problems that are related to the site production line, ensuring the project is completed on time.

Be responsible for intelligent manufacturing & AI research subjects application.

Be responsible for intelligent manufacturing information management and programming.

Qualifications & Experience:

Bachelors graduates or above, with more than 10 years of relevant major work experience in intelligent manufacturing and automation equipment development.

Familiar with R&D, production, management process in the aeronautical field.

Familiar with organizational intelligent manufacturing related to equipment software, hardware technology and organisational information management software.

Proficiently program the equipment control system of intelligent manufacturing.

Experience of Leading organization intelligent manufacturing.

Experienced in intelligent manufacturing and industrial robotics is preferred.

Familiar with information system or software development, programming

Experience with Siemens, Heidenhain and Fanuc machine system setting up, PLC modification and optimisation and overseas working experience is preferred.

Please quote ref JO0000000254 on application.
 
Job Number: BHJOB28358_10
Job Location: China
Rate: Negotiable
Duration: 1-3 years
Start Date: 01/06/2019
Input Date: 06/13/2019
Firm Name: STRONGFIELD TECHNOLOGIES USA INC
Attention: Adrian Medhurst
Address: 5000 BIRCH ST STE 3000
City, State: NEWPORT BEACH, CA 92660
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Process Engineer II / PHA and LOPA / OSHA PSM and EPA RMP regulatory requirements / oil and gas or chemical industry TX

Description:
165176
Job Title: Process Engineer II
Work Site Address: Houston TX 77079
Job Number: 10528-1

Start Date: 7/22/2019
End Date: 6 Months
Position Type: Contract

Primary Roles & Responsibilities:
• Lead, coordinate and/or participate in PHA and LOPA activities. Must be knowledgeable and competent with these processes.
• Write and implement effective procedures that support process safety initiatives.
• Monitor and develop key performance indicators (most importantly, leading indicators) to track PSM progress.
• Develop and maintain safety critical equipment and safety system lists for IPLs, SIS, and other loss prevention systems, as identified in the PHA/LOPA or other risk assessments.
• Participate in process safety audits and gap analyses.
• Coordinate process safety knowledge sharing and best practices across multiple assets.
• Communicate external process safety events and share best practices identified within the company.
• Participate in incident investigations.
• Participate in company process safety technical networks.
• Track, understand and help resolve action items related to process safety.
• Interprets and reviews application of codes, standards and common industry practices.
• Assist with process safety training for new and experienced employees

Qualifications and Education Requirements
Basic/Required Qualifications:
• Valid driver license
• A minimum of 3 years’ experience applying PSM principles for the oil and gas or chemical industry.
• Knowledgeable about PHA and LOPA methodologies.
• Trained as a PHA and LOPA Leader and experience as a facilitator and/or scribe of PHAs and LOPAs.
• Knowledge of OSHA PSM and EPA RMP regulatory requirements.

Preferred Qualifications:
• Knowledgeable in relief system evaluations and designs.
• Familiar with Safety Instrumented Functions (SIF), associated Safety Instrumented Systems (SIS) Cause and Effect Charts, Control System Narrative, ALARP
• Trained as a PHA and LOPA Leader and experience as a facilitator and/or scribe of PHAs and LOPAs.
• Expertise in PHA/LOPA Software and Consequence Modeling Software
• Familiarity with Recognized and Generally Accepted Good Engineering Practices
• Demonstrated ability to independently organize, prioritize, and coordinate a heavy work load in a potentially high stress, schedule driven environment to meet commitments.
• Ability to facilitate group meetings obtaining and valuing input from all levels.
• Proficient with Microsoft Office products (Outlook, Word, Excel, PowerPoint)
 
Job Number: MB-10528-1
Job Location: Houston, TX
Rate: DOE
Duration: 6 months
Input Date: 06/26/2019
Last Updated: 07/02/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Integrity & Quality Controls Engineer

Description:
JSG is hiring a Product Integrity & Quality Controls Engineer for our Client in Stratford, CT!

This is a position for a Non-Destructive Testing (NDT) Level 3. In this position, located in Stratford, Connecticut, you will be primarily developing Ultrasonic (UT) nondestructive test instructions for composite components. Other NDT techniques will also be developed depending on candidates existing experience with other methods.

Occasional travel will be required to other Facilities within Connecticut and to Pax River, MD to review aircraft configuration, to perform Non-Destructive Inspection, and to develop Inspection Techniques for aircraft.

You will work closely with a team of Design Engineers, NDT level 3's, Level 2’s, and Engineering technicians to design inspection standards, to coordinate for standard fabrication, and to write and approve inspection techniques for components using the standards.

The position is contingent upon being able to certify in UT level 3 per NAS 410 requirements within 90 days of beginning employment.

Secondary Level 3 responsibilities include performing engineering evaluations including defect analysis, NDT methods analysis, and inspection (when the inspection is required must have a minimum level II certification). Prepare and review engineering specifications. Develop and evaluate new equipment and technology. Provide technical support to manufacturing, engineering, programs, field personnel, and suppliers. Audit internal and external NDT inspection facilities. Participate in the development of NDT training course material for level I, II, and III. Test and certify NDT level I, II, and III inspectors in accordance with NAS 410 and company requirements.

Basic Qualifications :

Certification (ASNT Level 3 certification, NAS 410 Level 3 certification, or Equivalent in UT).
Ability to certify to NAS 410 Company UT level 3 requirements within 90 days of employment.
Including vision correctable to 20/25 in at least one eye.
Experience performing Ultrasonic NDT on Composite materials.
Proficiency in Microsoft Office products (Word, PowerPoint and Excel) and database utilization.
Must be a US Citizen or legally authorized to work in the US as a permanent resident.

Desired skills :

Composite UT experience on aerospace components.
Level 3 Eddy Current (ET) certification, and Fluorescent Penetrant (PT) level 3 certification are a plus.
Bachelor's degree or above in Engineering or Technology discipline.
Documented 5-10 years of aerospace nondestructive testing.
Technical writing experience.
Non-destructive test (NDT) experience with composite structures.
The ability to collaborate and work well with fellow team members.
Experience using CATIA or other 3D modeling software a plus.
Familiarity with NAVAIR Nondestructive inspection manuals and processes.
Experience in Laser Testing Methods (LM), or Thermal/Infrared Testing (IR) is a plus
 
Job Number: 372637
Job Location: Stratford, CT.
Per Diem: If Qualified
Overtime: Possible
Duration: 15+ Month
Start Date: ASAP
Input Date: 05/14/2019
Last Updated: 07/08/2019
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Program Analyst

Description:
Program Analyst

Houston, TX
$64.48/hr
2 year contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
Analyst supporting Space Systems programs and other sites based on need, reporting to the Segment Finance / Program Planning and Control organization. Responsibilities include application of company's Earned Value Procedure and implementation of an Earned Value Management System (EVMS) providing for the assessment of program performance as a viable program management tool.

The analyst will assist the program PM/Business Manager in the early identification of potential cost/schedule issues, providing the Program Office and Integrated Product Team leads (IPTs)/Control Account Managers (CAMs) the means for corrective action and risk mitigation. The candidate will provide structured program performance information while managing the performance measurement baseline.

Guidance and support will be provided to IPTs and CAMs utilizing EV methodologies and critical analysis to connect data with trends and underlying drivers. Ability to implement and maintain assigned budgets, including applicable earned value methods during initiating and rolling wave periods. The analyst will provide IPTs/CAMs with results of actual costs in relation to estimates/project performance.

Additional efforts include monthly performance, schedule, and estimate-to-complete (ETC)/estimate-at-complete (EAC) updates, working with IPTs/CAMs to identify cost/schedule variances and determine impacts to the program. The candidate will utilize knowledge of EVM techniques in order to manage changes to the program baseline. Month end reporting and associated deliverables are critical to the position and requires the ability to produce CPR and 533 products. Applicant may also be required to provide for proposal support which consists of providing BOEs for EV estimating with accuracy and conformance to proposal time lines and EVMS policy.

Education:
Minimum Bachelor’s Degree in Accounting or Engineering.

Experience/Qualifications:
Candidate must possess an advanced knowledge of Earned Value Management standards, methodologies, and have a background in Work Breakdown Structures, program scheduling, and project budgeting.
EVMS experience is required.
Candidate must also be a proficient user in Excel, Access, MS Project, EV software and have familiarity with SAP or other ERP/financial systems including standard costs and strategy queries. Strong interpersonal skills with the ability to work in a multi-functional team environment are required.
Proficiency in Tiger is also a plus, experience with SAP and MS Project Server is desired.

Additional Comments: Candidate must possess strong business acumen with proper understanding of program/project contracts, fee, rates, and operating plans. Experience with 533 and CPR is essential.
 
Job Number: 10545
Job Location: Houston, TX
Rate: 64.48
Per Diem: No
Overtime: Possible
Duration: 2 years
Start Date: ASAP
Input Date: 03/06/2019
Last Updated: 06/25/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Program Analyst

Description:
Program Analyst

Windsor Locks, CT and Houston, TX
$64.48/hr
2 year contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
Analyst supporting Space Systems programs and other sites based on need, reporting to the Segment Finance / Program Planning and Control organization. Responsibilities include application of company's Earned Value Procedure and implementation of an Earned Value Management System (EVMS) providing for the assessment of program performance as a viable program management tool.

The analyst will assist the program PM/Business Manager in the early identification of potential cost/schedule issues, providing the Program Office and Integrated Product Team leads (IPTs)/Control Account Managers (CAMs) the means for corrective action and risk mitigation. The candidate will provide structured program performance information while managing the performance measurement baseline.

Guidance and support will be provided to IPTs and CAMs utilizing EV methodologies and critical analysis to connect data with trends and underlying drivers. Ability to implement and maintain assigned budgets, including applicable earned value methods during initiating and rolling wave periods. The analyst will provide IPTs/CAMs with results of actual costs in relation to estimates/project performance.

Additional efforts include monthly performance, schedule, and estimate-to-complete (ETC)/estimate-at-complete (EAC) updates, working with IPTs/CAMs to identify cost/schedule variances and determine impacts to the program. The candidate will utilize knowledge of EVM techniques in order to manage changes to the program baseline. Month end reporting and associated deliverables are critical to the position and requires the ability to produce CPR and 533 products. Applicant may also be required to provide for proposal support which consists of providing BOEs for EV estimating with accuracy and conformance to proposal time lines and EVMS policy.

Education:
Minimum Bachelor’s Degree in Accounting or Engineering.

Experience/Qualifications:
Candidate must possess an advanced knowledge of Earned Value Management standards, methodologies, and have a background in Work Breakdown Structures, program scheduling, and project budgeting.
EVMS experience is required.
Candidate must also be a proficient user in Excel, Access, MS Project, EV software and have familiarity with SAP or other ERP/financial systems including standard costs and strategy queries. Strong interpersonal skills with the ability to work in a multi-functional team environment are required.
Proficiency in Tiger is also a plus, experience with SAP and MS Project Server is desired.

Additional Comments: Candidate must possess strong business acumen with proper understanding of program/project contracts, fee, rates, and operating plans. Experience with 533 and CPR is essential.
 
Job Number: 10557
Job Location: Windsor Locks, CT
Rate: 64.48
Per Diem: No
Overtime: Possible
Duration: 2 years
Start Date: ASAP
Input Date: 03/06/2019
Last Updated: 06/25/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer (Direct-hire)

Description:
We have an outstanding career opportunity for a Project Engineer to join a leading Company located in the Lancaster, NY surrounding area.

A Project Engineer is responsible for planning, overseeing and leading projects from ideation through to completion. This role requires interaction with a range of internal and external stakeholders, most often managing several moving parts of the project, simultaneously.

Job Responsibilities:
Leading project planning sessions.
Coordinating cross-functional contributions and maintaining dashboards.
Managing project progress and adapt to work as required.
Ensuring projects meet schedule requirements.
Managing relationships with Program Managers (when applicable) and stakeholders.
Overseeing all incoming and outgoing project documentation
Designing a risk mitigation plan.
Conducting project review and creating detailed reports for executive staff.
Optimizing and improving processes and the overall approach where necessary.
Following correct procedures and guidelines (Group Recommended Practices).

Basic Hiring Criteria:
Bachelor’s degree in Engineering, or related field.
PMP Certification or similar training.
Project scheduling of multiple simultaneous projects.
Significant experience using project scheduling software.
Proficiency in the use of MS Office applications.
Product Design Experience.
5+ year Project Engineer Experience or similar.
 
Job Number: 36348
Job Location: Lancaster, NY
Rate: $78k - 88k
Duration: Direct-hire
Start Date: ASAP
Input Date: 06/12/2019
Firm Name: TAD PGS INC
Attention: Sean Mulshine
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

Project Manager

Description:
PDS Tech, Inc. is seeking a Project Manager in Auburn Hills, MI.

Responsibilities:

  • Product development process and ensure processes are followed and all product documents and data are completed and stored.
  • Review and manage project scope, goals, resources, and deliverables.
  • Track and report project costs, milestones, and other key project metrics.
  • Prepare team for internal and external design reviews to minimize technical and commercial risks.
  • Execute change management; document scope requirements and associated risks, track and revise project timeline, forecast project cost and communicate through the appropriate channels.
  • Provide regular status updates and be the contact person/interface to all involved departments & parties.
  • Drive engineering and operations teams to keep projects on time and on target.
  • Manages projects in all aspects of New Product Introduction processes from project initiation through successful transfer into production in manufacturing locations worldwide.
  • Suppliers lead.
  • Customer satisfaction oriented.

Qualifications/Education:
  • Minimum five years’ experience as a project manager managing multiple projects in engineering and production environment.
  • Knowledgeable of E/E and/or software engineering, design and analysis. Previous E/E and/or software engineering design and analysis experience is a bonus. Prefer experience working with integrated display units.
  • Bachelor’s degree or equivalent required; degree in technical field preferred.
  • Must be able to read, write, and speak English fluently.
  • Proficient in Microsoft Office Suite including MS Project.
  • Experience with Catia v5 is helpful.
  • Self-motivated with ability to function in a high energy, fast paced team environment with minimal direction.
  • Experience collaborating across multifunctional teams.
  • Must have excellent planning and organizational skills.
  • Able to build up new customers relationship and trust, to develop and consolidate long terms cooperation.

 
Job Number: 1910101837
Job Location: Auburn Hills, MI
Duration: 12 months
Input Date: 05/09/2019
Last Updated: 08/07/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Katie Windhurst
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033g9xQAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Manager

Description:
Project Manager

Riverside, CA
$33.38/hr
6 month W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
Manage mid level complexity engineering management and project management for technical process improvement projects. Responsibilities include developing productivity tools, managing documentation, tracking schedules.

Job Description:
This site position will play a key role in the implementation of the Manufacturing Execution System (MES) and Overall Equipment Effectiveness (OEE) systems. The candidate must have knowledge of discrete manufacturing in an automated environment, with a demonstrated track record of proficiency with MES/OEE and continuous improvement/process engineering.

Major Duties & Responsibilities:
• Support the development and training of the manufacturing OEE strategy for the plant and each of the Value Streams utilizing OEE framework to capture and manage execution of the strategic actions.
• Support plant-wide framework for OEE and SMART Manufacturing implementation and facilitate the execution of this strategy.
• Manage the execution and maintenance of Visual Management tools including OEE dashboards, OEE reports(Tableau).
• Maintain, compile, analyze, and report metrics of improvement projects from Machine Data Collection (CIMCO) captures.
• Coordinate, assist, and deliver team-based OEE and SMART Factory training to Value Stream leadership and staff including operators.
• Identify and implement OEE activities on the shop floor to produce bottom line savings in coordination with Value Stream MEs and CIs.
• Coordinate with resource departments including Corporate Project Management and Corporate IT on issues relating to OEE implementation.
• Assist in the development of programs/systems/processes and equipment upgrades that improve equipment reliability/OEE (e.g., preventive and predictive maintenance systems, techniques and schedules, material recommendations, troubleshooting guides, repair plans, training, spare parts, etc.).
• Interacting with multiple departments including but not limited to Corporate IT, Planning, Plant Production Teams, and MES/OEE Vendors.
• Provide “On-call” rotating support for MES/OEE systems to assure 24/7 manufacturing operations.
• Training super and end users on functionality and process changes as they relate to MES/OEE.
• Trouble shooting daily operational system issues to define root cause, working in collaboration with business partner to create temporary/permanent solutions
• Organize, schedule and run meetings to coordinate on-site commissioning, identifying opportunities and system needs
• Monitor process and technology and provide insights into overall status

Position Requirements:
• Successful candidate will possess a minimum of a Bachelor’s degree in an Engineering/Computer Technology field with at least 3 years of experience working preferably in the aerospace, automotive, or pharmaceutical industries.
• Experience with Overall Equipment Effectiveness (OEE) and MES implementation highly desired.
• Knowledge and experience with MES technologies. Solumina, and SAP would be preferable.
• Experience in rolling out continuous improvement projects including OEE, SMED, TPM, Six Sigma
• Excellent problem solver with the ability to keep many driving factors and requirements in focus
• Strong communication and documentation skills, ability to communicate and interact at various levels of organization.
• Installation and configuration standard as well as an understanding of project management and following project phases including requirements definition, detailed design generation, software configuration, system integration and qualification testing.
• Knowledge of control systems is desirable.
• Demonstrated leadership skills and experience working in diverse, multi-disciplined work groups.
• Experience and/or substantial understanding of process control principles and common system vendors’ available products.
• Excellent written and communication skill are required.

-Bachelors degree required
 
Job Number: 10697
Job Location: Riverside, CA
Rate: 33.38
Per Diem: No
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 03/26/2019
Last Updated: 08/08/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Engineer I / BS degree required NY

Description:
165128
Job Title: Quality Engineer I

Work Site Address: Hauppauge, NY 11788
Job Number: 8708

Start Date: 6/17/2019
End Date: 9/17/2019
Position Type: Contract

Develops, modifies, applies and maintains quality standards and evaluation methods for products and processes. Provides moderately complex statistical information for quality improvement by determining and applying testing methods and criteria. Coordinates and guides technical evaluations, analysis, and related data acquisition processes to ensure division quality objectives are achieved.


Qualifications and Education Requirements

Bachelor’s degree is REQUIRED
1. Bachelors degree (BS) in Engineering or a related technical discipline. Demonstrated ability to perform the essential functions of the job typically acquired through two or more years of related experience.
2. American Society for Quality certification desired. Practical knowledge of state-of-the-art inspection and quality engineering/assurance techniques, procedures, instruments, equipment, theories, principles and concepts and general business operations.
3. Knowledge of aerospace industry or similar industry products and legal and regulatory requirements related to field.
4. Ability to effectively apply continuous improvement principles and techniques to quality and manufacturing functions.
5. Ability to use standard business software applications and/or specialized data analysis tools.
6. Ability to work on a variety of problems of moderate scope and complexity where analysis of the situation or data requires thorough identification of factors and analysis of impact; work within general work objectives regarding projects and team goals.
7. Ability to read, analyze, and interpret scientific and technical journals, and financial reports.
8. Ability to effectively communicate and present information to team members, team leaders, and top management; respond to significant inquiries or complaints from customers, regulatory agencies, or members of the business community.
9. Ability to interpret a broad variety of technical instructions in mathematical or diagram form that include several abstract and concrete variables.
10. Ability to define problems, collect data, establish facts, and draw valid conclusions.
11. Ability to use full discretion in selecting procedures and techniques to apply to work and determine priority and order of assignments.
12. Ability to effectively demonstrate team member competencies and participate in goal-setting, performance feedback, and self-development activities.
 
Job Number: JK-8708
Job Location: Hauppauge, NY
Rate: 50/hr
Per Diem: no
Duration: 3 months
Input Date: 06/06/2019
Last Updated: 06/24/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
RF Electrical Engineer

Description:
** Candidate must possess and maintain an Active DoD Secret Security Clearance. Please click on this link if you have any questions on how to obtain a clearance https://news.clearancejobs.com/2016/06/12/obtain-security-clearance/
Position requires U.S. Citizenship.**

Job Responsibilities:
This position will support electromagnetics and radio frequency (RF) testing.
Working knowledge of RF testing of structures, antennas, radomes, and other aerospace related components is a must.
The qualified applicant shall be able to perform data analysis and present findings to program engineering teams, be able to author or review RF test plans, and provide input to test fixture design, manufacturing, and set-up. Daily communication with management staff, program/Integrated Product Team (IPT) members, and customers is expected.
Job Qualifications:
B.S. in Electrical Engineering (ABET), specializing in RF /Electromagnetics; M.S. is desirable o Minimum 5 years with B.S. or related experience, 3 years with M.S.
Relevant experience in aerospace industry, with experience in testing and analysis of structures, conformal antennas/apertures, arrays, and a Solid background in electromagnetics.
Working experience with test and evaluation of microwave devices.
Verification of antenna, radome, and structure performance through prototype fabrication, integration into test fixture(s), and testing.
Experience with commercial data analysis software, such as Knowbell and/or Pioneer.
Familiarity with Computational Electromagnetic (CEM) tools.
Willingness to work cooperatively in a team.
Proficient in MS Office suite.
Experience fostering and leading in a culture of continuous improvement.
Excellent verbal and written communication skills.
Desired Skills and Experience:
Working experience within various anechoic test chambers.
Ability to create software algorithms for design, optimization, and data analysis using tools such as MATLAB or FORTRAN.
Proficiency with Computational Electromagnetic (CEM) codes such as HFSS, FEKO, PMM, XPATCH, RAM2D, etc.
Familiar with common material measurements for the extraction of electrical properties.
Knowledge of composite manufacturing processes.
Ability to work across multiple projects and follow through to completion.
Ability to multitask and prioritize.
Strong attention to detail.
Initiative, selfstarter, adaptable, and high motivation for excellence.
High energy, results oriented, self-motivated / self-reliant, team player.
Strong interpersonal skills with ability to interface with an organization at all levels.
Ability to work in a dynamic, fast paced environment.
 
Job Number: 36321
Job Location: Magna, UT
Duration: 12 mos
Input Date: 06/13/2019
Last Updated: 06/19/2019
Firm Name: TAD PGS INC
Attention: Kim Silcott
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Radar Systems Engineer - Clearance

Description:
Radar Systems Engineer that has experience doing data analysis and assessment of new system capabilities Radar domain knowledge is desirable. Algorithm prototyping background as well as running radar simulation software will support the job function. Perform analysis results quantifying system performance.
 
Job Location: Woburn, MA
Input Date: 05/30/2019
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Gina Smith
Address: 29 STILES RD STE 302
City, State: SALEM, NH 03079
Phone: 603/890-8778
800 Phone: 866/277-3343
Fax Phone: 603/890-6668
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
SENIOR ENGINEER

Description:
Senior Engineer



Summary: Working with minimal supervision this individual will be responsible for the design and development of environmental control system products and / or systems for aerospace applications. May work directly with customers and provide both technical and project leadership to internal and external resources.



Essential Duties and Responsibilities include the following:


  • Performs engineering assignments with limited supervision.

  • Assesses customer requirements and develops designs, or provide design direction, to meet requirements.

  • Prepare program plan and effectively identify and manage program risks.

  • Analyze problems and makes decisions on proper action to be taken.

  • Responsible for completion and accuracy of engineering documentation.

  • Prepares and presents design data in support of internal and Customer design reviews.

  • Support DFX (Design for Cost, Manufacturability, Reliability, etc.) efforts.

  • Prepares Development and Qualification Test Plans, Procedures and Test Reports.

  • Monitors and controls program cost and schedule.

  • Supports existing products.

  • Makes recommendations for design, cost, or process improvements including substantiating strategy.

  • Provides technical direction and advice to Business Development, Manufacturing and Quality organizations.

  • Performs assignments broad in nature requiring substantial ingenuity and originality usually acquired through industry experience. These assignments may involve:

  • Sophisticated product and technology development.

  • Rigid timetables and short lead schedules

  • Extensive planning and interaction with many support groups and departments.

  • Complex report writing and detailed testing for customer or regulatory approval.

  • Provides leadership to support personnel and less experienced engineering team members

  • Assists in planning and coordination with support groups.

  • Reviews project status, makes recommendations where necessary and instructs in details unique to industry.

  • May perform supervisory duties (train, mentor, evaluate, etc.) for departmental employees on specific tasks or projects.

  • Assists Business Development Department in proposal preparation and customer presentations; interacts with customers and suppliers on technical and program matters.

  • Communicates status accurately and regularly to Management, recommending solutions for problems encountered.

  • Assists Manager in departmental planning and operations.


QUALIFICATIONS


  • B.S. Degree in Engineering

  • 7 years' experience in design, development, qualification and production support of aerospace components.

  • Specific experience in aircraft environmental controls systems and components is highly desirable.

  • Excellent report-writing skills, presentation and customer interface skills.

  • Strong knowledge of CAD design and analysis tools.

  • Proficient in the use of MS Office software, experience with MS Project a plus.

  • Knowledge and experience of DO-160 / MIL-STD-810 requirements




Travel: Periodic travel required to support customer onsite meetings and reviews, both domestic and international.



Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-01294
Job Location: Seminole, OK
Rate: 0.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-01-10 00:00:00.0
Input Date: 01/10/2019
Last Updated: 06/14/2019
Firm Name: NESCO RESOURCE
Attention: Kristy Thompson
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Satellite Space Technician - Clearance NC

Description:
1632-1
Satellite Space Technician
Work Location: Fort Bragg, NC
Status: Open

Qty: 1
Desired Start Date: 6/24/2019
End Date: 9/30/2019

Job Description:
This position will require a familiarity with many facets of national space capabilities. Understanding of basic space operations with desired experience in controlling of satellites. Familiar with constellations used by DOD and process for support request. Familiar with commercial satellite services. Knowledge of spectrum deconfliction requirements for utilizing satellites.

Basic Qualifications:
Have knowledge of DOD satellite health. Ability to leverage satellite services. Have a working knowledge of assisting with Space request for information processes. Conducts mission/program specific real time spacecraft/satellite flight operations during readiness, execution and evaluation phases. Develops detailed plans and procedures to provide maximum mission support in areas such as orbit dynamics, satellite performance analysis, command and control of on-orbit satellites. Provides technical direction for on orbit mission support, plans for critical vehicle malfunctions and recommends alternate operating techniques to continue maximum mission support. Provides failure analysis of the performance of the orbiting satellites via telemetry data. Utilizes system software to accomplish all spacecraft control tasks and recommends improvements. Analyzes and validates software performance. Performs flight length orbit adjust and daily special event studies.

Level: Level 3: BS+6-10 YRS or MS+4-8 YRS
Pay Rate: $23.32 - $38.85 Hourly
 
Job Number: JE-1632-1TSSCI
Job Location: Fort Bragg, NC
Rate: 38.85/hr
Overtime: no
Duration: 3 months +
Input Date: 05/30/2019
Last Updated: 06/24/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Software Developer

Description:
OOP, C++, Linux, scripting language, secret clearance
 
Job Location: Denver, CO
Input Date: 04/17/2017
Firm Name: JOHNSON SERVICE GROUP
Attention: Michael Geil
Address: 1600 AIRPORT FWY STE 400
City, State: BEDFORD, TX 76022-6871
Phone: 817/545-4009
Fax Phone: 817/545-2006
Email: mgeil@jsginc.com
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Location: Palmdale, CA
Rate: $105.00/HR
Duration: 9 month contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years. Interim or Top Secret Clearances would be accepted****

Job Description:
- The applicant will be responsible for developing, testing and integrating Object Oriented C++ software, utilizing design patterns with GitLab, VXWorks, Jira, in real time HWIL avionic systems.
- Candidate should have experience writing software that develops and utilizes telemetry to test vehicle management systems utilizing Gyros, Guidance, Navigation and controls with flight systems.
- Candidate will take documentation of program system capabilities and transpose those capabilities into an integrated embedded air vehicle system.
- The candidate can interface with adjacent organization i.e. Guidance, Navigations and Controls, Flight systems, Sub Systems and Systems Engineering to resolve questions of program intent and taking that intent and using advance programming techniques to develop an integrated HWIL system.
- Excellent oral and written communication skills required as is the ability to flex and adapt in a fast-paced team environment.

Required Skills:
- C++, Embedded, HWIL, AGILE, experience developing/writing COMM/NAV Avionics Software

Education:
Level 4: BS+11 YRS or MS+9 YRS
 
Job Number: 11073
Job Location: Palmdale, CA
Rate: $105.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 9 mos
Start Date: ASAP
Input Date: 06/12/2019
Last Updated: 09/03/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Interim secret or Top Secret acceptable
Special access required

The applicant will be responsible for developing, testing and integrating Object Oriented C++ software, utilizing design patterns with GitLab, VXWorks, Jira, in real time HWIL avionic systems. Candidate should have experience writing software that develops and utilizes telemetry to test vehicle management systems utilizing Gyros, Guidance, Navigation and controls with flight systems. Candidate will take documentation of program system capabilities and transpose those capabilities into an integrated embedded air vehicle system. The candidate can interface with adjacent organization i.e. Guidance, Navigations and Controls, Flight systems, Sub Systems and Systems Engineering to resolve questions of program intent and taking that intent and using advance programming techniques to develop an integrated HWIL system. Excellent oral and written communication skills required as is the ability to flex and adapt in a fast-paced team environment.
 
Job Number: 1644
Job Location: CA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mos +
Start Date: ASAP
Input Date: 06/10/2019
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Staff Software Engineer

Description:
The Software Engineer will work with a global team of engineers in Phoenix and India, on real time embedded software for electronic control units for aerospace applications.

The role will involve:
• requirements definition using DOORS or structured modelling,
• detailed design,
• code implementation using embedded C,
• validation of requirements and
• verification of implementation.
• managing Problem reports for the software that has already been delivered.
The successful candidate will be a highly motivated self-starter with strong written and oral communication skills and work well in a team environment.

Primary Responsibilities
• Executing new product introduction, value engineering, and production support projects
• Establishes software design requirements traceability, flow down requirements, development of code and test cases.
• Hands on debugging of code during integration and lab testing.
• Developing complex sub-system trade studies, algorithms, and error budgets.
• Driving the usage of appropriate Lean Product Development tools to support cost effective technical solutions with heavy focus on platform design, reuse, and knowledge-management.

Basic Qualifications
• Proficient with C programming language, and embedded systems in a lab environment.
• Experience with Microprocessors, Microcontrollers, and/or DSPs
• Excellent written and verbal skills
• Good computer skills with ability to learn new programs/software
• Ability to work under pressure and within time constraints
• Excellent organizational skills with ability to multi-task amidst rapid change

Preferred Qualifications
• 6+ years’ experience in software development
• Experience working within DO-178B/C certification program(s), including Stages of Involvement (SOI) Audits under EASA or FAA
• Model Based Development, using SysML, Simulink or SCADE
• Experience with the following industry guidance: DO-330, DO-331, DO-254, ARP4754A
• Knowledge and use of ADA, Assembly, Perl, C#
• Software Verification including, test procedure development, robustness testing and debug
• Experience with software configuration management and problem reporting tools
 
Job Number: 1910103342
Job Location: Phoenix, AZ
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 09/05/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Must Be Eligible for a Secret Clearance.

Radar System Software development team to develop Command and Control Interfaces, Real-time system control code, Radar Subsystem development, Range Control System and Graphics Package development.

Experience with programming in C, or C++. Background in real-time embedded systems with Emphasis in Command and Control interfaces desired as well as a basic understanding of physics and network programming
 
Job Number: 46188
Job Location: FL
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 9 mos+
Start Date: ASAP
Input Date: 06/04/2019
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
active secret clearance preferred

Ada, Real time embedded software experience
Working knowledge of C++, Working knowledge of Rhapsody
 
Job Number: 46003
Job Location: TX
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 06/04/2019
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Location: Palmdale, CA
Rate: $95.00/HR
Duration: 6 month contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

Job Description:
- Applicant will be the software architect responsible for embedded software definition, design, development and integration to support real-time embedded avionics software projects.
- The applicant will be responsible for designing, coding, testing and integrating software.
- Develop, analyze, integrate, and test embedded software for the Systems Integration team.
- Contribute to software requirements, design, code, reviews, and test of operational flight programs.
- Modeling and simulation efforts.
- Corrects program errors, prepares operating instructions, compiles documentation of program development, and analyzes system capabilities to resolve questions of program intent, output requirements, input data acquisition, programming techniques, and controls.
- Good oral and written communication skills required as is the ability to flex and adapt in a fast-paced team environment.
- Good presentation skills.

Required Skills:
- Advanced Level C++
- Embedded Systems
- HWILL
- AGILE
- Experience developing/writing COMM/NAV Avionics Software

Education:
- Level 3: BS+6-10 YRS or MS+4-8 YRS
 
Job Number: 10741
Job Location: Palmdale, CA
Rate: $95.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 05/23/2019
Last Updated: 07/29/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Location: Marietta, GA
Rate: $58.37/HR
Duration: 1 year contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST be able to obtain a Secret Clearance****

Job Description:
- Applicant will be the software architect responsible for embedded software definition, design, development and integration to support real-time embedded avionics software projects.
- The applicant will be responsible for designing, coding, testing and integrating software.
- Develop, analyze, integrate, and test embedded software for the Systems Integration team.
- Contribute to software requirements, design, code, reviews, and test of operational flight programs.
- Modeling and simulation efforts.
- Corrects program errors, prepares operating instructions, compiles documentation of program development, and analyzes system capabilities to resolve questions of program intent, output requirements, input data acquisition, programming techniques, and controls.
- Good oral and written communication skills required as is the ability to flex and adapt in a fast-paced team environment.
- Good presentation skills.
- The selected applicant will utilize advanced technical concepts in support of software products within Advanced Development Programs (ADP).
- The applicant will be responsible for creating real-time software, as well as algorithm design and development of engineering system modeling and data representation.
- This role requires a highly motivated, organized engineer that is familiar with all aspects of software development. Applicant must have excellent oral and written communication skills.

Skills Mandatory:
- Bachelors in technical discipline such as computational media or computer science or software engineering
- Strong C++ and object oriented programming/design skills
- Experience with either Linux or Windows operating environments
- Must be a US Citizen.

Skills Desired:
- Experienced Microsoft Visual Studio IDE user
- Limited experience with real-time systems and multi-threading
- Ability to obtain a DoD a security clearance.
 
Job Number: 10856
Job Location: Marietta, GA
Rate: $58.37
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 04/29/2019
Last Updated: 07/29/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Location: Palmdale, CA
Rate: $105.00/HR
Duration: 15 month contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

Job Description:
- Our client is looking for a software engineer with 10+ years of experience in building real-time, embedded avionics/vehicle management systems.
- The ideal candidate has experience decomposing high-level air system requirements into detailed avionics subsystem and software requirements specifications (SRS).
- The candidate should also have experience developing avionics system architectures and using model-based system engineering tools (e.g. Rhapsody, Rational) to document them.
- The candidate should be proficient with developing safety-critical components in C and/or C++ in a Linux environment, writing automated unit tests, and have experience integrating software components in a System Integration Lab (SIL).
- Experience working on an Agile team is desired.
- Candidate must possess excellent oral and written communication skills, be able to guide and mentor junior engineers, apply extensive technical expertise, has full knowledge of other related disciplines, and work without appreciable direction.
- Candidate must have an active DoD Secret or Top Secret clearance with an investigation within the last 5 years; position requires candidate to be cleared to a special access program (SAP).

Education:
Level 4: BS+11 YRS or MS+9 YRS
 
Job Number: 10790
Job Location: Palmdale, CA
Rate: $105.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Start Date: ASAP
Input Date: 04/15/2019
Last Updated: 07/17/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer ( Albuquerque , NM ) TS9141295

Description:
Software Engineer ( Albuquerque , NM ) TS9141295
3+ Month Contract

Pay Rate: Open

Clearance: Active TS strongly preferred. MUST be eligible to obtain SCI. MUST have SSBI w/in the last 5 yrs (please note the date at top of resume for quick review.) Will gain cleared program access upon conversion.

Conversion: High - Intent

Knowledge/understanding of embedded software.
Experience with engineering/ops of aerospace systems.
Willingness to learn. Avoid ‘database’ and ‘windows application’ developer resumes. Avoid inactive but prior clearances w/o an active SSBI. Smallish team (10 or so), must be self-motivated and able to work with minimal supervision, remote from peers in VA and AZ.**

As a member of a spacecraft operations team, a software/computer/electrical systems engineer is needed to participate in the development, test and operation of on-orbit systems. Collaborate within a multidisciplinary engineering team to analyze customer needs, develop a detailed understanding of system capability and implement and test software updates to fix problems and enhance the system. Knowledge of engineering process best practices and software lifecycle activities in an avionics integration and test environment is highly desirable.

The ideal candidate will have expertise in C/C++ programming and hands-on experience with the VxWorks realtime operating system. Excellent reading and writing skills are required as the candidate will be involved in the entire system lifecycle and will interact frequently with other engineering technical experts. Candidates will participate in software requirements analysis and specification, test planning from unit to system level, planning and performing software qualification tests, writing and testing operations procedures and monitoring/debugging on-orbit software performance as part of a team developing software for both existing and in-development spacecraft programs. Familiarity with common software development tools for configuration management, problem tracking and continuous integration is expected. Candidates should be self-motivated to learn and will be expected to travel to other Northrop Grumman sites on occasion for initial orientation and training.
A BS in Engineering & 5 years or Masters in Engineering & 3 years is also mandatory.
 
Job Number: TS9141295
Job Location: Albuquerque, NM
Rate: Open
Per Diem: Yes
Overtime: Yes
Duration: 3+ Months
Start Date: ASAP
Input Date: 06/05/2019
Last Updated: 06/05/2019
Firm Name: TALENTPRO CONSULTING
Attention: Tim Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer ( Gilbert, AZ ) 8949634 and 9189234

Description:
Software Engineer ( Gilbert, AZ ) 8949634 and 9189234
12 Month Contract

Pay rate target: $50/hr , maybe more for the right candidate

**(1) Perl Scripting Experience;
(2) Is a hardware and/or software test engineer; and
(3) Has some experience with LabView but not required.

Team: The team size is about 4 engineers. But the candidate will be interface with other engineers from different hardware and software disciplines. This candidate will be developing Perl test scripts to verify a hardware/software simulator product**

Design and develop software scripts to test real-time spacecraft hardware and software. Debug and diagnose software in a lab environment. Coordinate with engineering peers of other disciplines to develop software tests, support software integration activities and resolve software/hard issues. The candidate must work in a team setting but should be able to independently and efficiently manage their time to complete assignments in a dynamic, schedule-driven environment.

Required Capability: Must have good knowledge of Perl.

Additional Capability: Should be able to review requirements and develop test scripts to verify those requirements.
 
Job Number: 8949634 and 9189234
Job Location: Gilbert, AZ
Rate: 50
Per Diem: yes
Overtime: Yes
Duration: 12 month Contract
Start Date: ASAP
Input Date: 06/05/2019
Last Updated: 06/05/2019
Firm Name: TALENTPRO CONSULTING
Attention: Tim Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer ( Gilbert, AZ ) 8949634 and 9189234

Description:
Software Engineer ( Gilbert, AZ ) 8949634 and 9189234
12 Month Contract

Pay rate target: $50/hr , maybe more for the right candidate

**(1) Perl Scripting Experience;
(2) Is a hardware and/or software test engineer; and
(3) Has some experience with LabView but not required.

Team: The team size is about 4 engineers. But the candidate will be interface with other engineers from different hardware and software disciplines. This candidate will be developing Perl test scripts to verify a hardware/software simulator product**

Design and develop software scripts to test real-time spacecraft hardware and software. Debug and diagnose software in a lab environment. Coordinate with engineering peers of other disciplines to develop software tests, support software integration activities and resolve software/hard issues. The candidate must work in a team setting but should be able to independently and efficiently manage their time to complete assignments in a dynamic, schedule-driven environment.

Required Capability: Must have good knowledge of Perl.

Additional Capability: Should be able to review requirements and develop test scripts to verify those requirements.
 
Job Number: 8949634 and 9189234
Job Location: Gilbert, AZ
Rate: 50
Per Diem: yes
Overtime: Yes
Duration: 12 month Contract
Start Date: ASAP
Input Date: 06/05/2019
Last Updated: 06/05/2019
Firm Name: TALENTPRO CONSULTING
Attention: Tim Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer - Active Secret Clearance needed - Locations: Multiple

Description:
Seeking skilled Software developers that have an Active Secret
Clearance

SKILLS:
C/C++, embedded C development and debugging on target hardware.
digital signal processing

-TOP RATE$$-
E-mail me your updated resume and desired locations.
 
Job Number: 259874
Job Location: multiple
Rate: OPEN
Per Diem: yes
Overtime: possible
Duration: Temp
Start Date: ASAP
Input Date: 04/08/2019
Last Updated: 06/03/2020
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer - Clearance CA

Description:
Software Engineer
Work Location: Palmdale, CA
Status: Open

Qty: 1
Desired Start Date: 4/29/2019
End Date: 7/30/2020

Job Description:
The Skunk Works ® is looking for a software engineer with 10+ years of experience in building real-time, embedded avionics/vehicle management systems. The ideal candidate has experience decomposing high-level air system requirements into detailed avionics subsystem and software requirements specifications (SRS). The candidate should also have experience developing avionics system architectures and using model-based system engineering tools (e.g. Rhapsody, Rational) to document them. The candidate should be proficient with developing safety-critical components in C and/or C++ in a Linux environment, writing automated unit tests, and have experience integrating software components in a System Integration Lab (SIL). Experience working on an Agile team is desired.

Candidate must possess excellent oral and written communication skills, be able to guide and mentor junior engineers, apply extensive technical expertise, has full knowledge of other related disciplines, and work without appreciable direction.


Level: Level 4: BS+11 YRS or MS+9 YRS
Pay Rate: $80.00 Hourly
 
Job Number: JE-1465-1S5
Job Location: Palmdale, CA
Rate: 80/hr max
Per Diem: no
Duration: 5 months
Input Date: 04/15/2019
Last Updated: 07/16/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer - Clearance TX

Description:
Software Engineer
Work Location: Fort Worth, TX
Status: Open
Software Engineer
Qty: 1
Desired Start Date: 5/6/2019
End Date: 5/1/2020

Job Description:
This position is with the Advanced Development Programs Software Systems group in Fort Worth, TX. Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems. Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications. (For positions that perform IT responsibilities, use E646, Systems Engr-IT).

This position is for a software engineer. The chosen candidate will be joining a team that provides technical support to multiple organizations within the Aeronautics Business Area. The individual will be responsible for software development of Artificial Intelligence applications and tools for use within multiple environments.

Required Skills:

Master's Degree in Artificial Intelligence, Machine Learning, Advanced System Design, or Software Engineering

Experience with C++, Java, and Python
Experience with Tensow Flow, PyTorch, Keras, or SciKit-Learn
Experience with Windows and LINUX/UNIX development platforms
Experience with integrated development environment (IDE) tools, such as Jupyter Notebook, Eclipse or Spyder
Experience with Agile software development
Experience with Artificial Intelligence technologies
Experience with automated testing and creation of unit tests
Experience with MATLAB or Simulink
Working knowledge of Keyless Signature Infrastructure (KSI) and/or other digital signature platforms (i.e. PKI)
Working knowledge of source code management
Experience presenting technical status and solutions to leadership
Ability to travel

Specific required skills identified in Job Description

Level: Level 4: BS+11 YRS or MS+9 YRS
Pay Rate: $65.74 Hourly

Areas of Expertise Emebedded Software Development Yes 1 4 - 6 Years
 
Job Number: JE-1474-1TS
Job Location: Fort Worth, TX
Rate: 65.74/hr max
Per Diem: no
Duration: 12 months
Input Date: 05/16/2019
Last Updated: 06/26/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer - contract work - AZ

Description:
Developing
(1) network client/server software
(2) Distributed Systems
(3) TCP / UDP communication protocol.]
The position requires someone who’s actually done software development focused in the areas that are captured above.
C++ development.
Should be familiar w/ UML.
-Knowledge of WindRiver Simics or Perl will be considered a plus.

Role/Duties:
Design, develop and test spacecraft simulation software.
Debug and diagnose software in a lab environment.
Coordinate with engineering peers of other disciplines to develop software models of hardware components, support software integration activities and resolve interface issues.
The candidate must work in a team setting but should be able to independently and efficiently manage their time to complete assignments in a dynamic, schedule-driven environment.
 
Job Number: 205878
Job Location: AZ
Rate: 50-75 / hr
Per Diem: YES
Overtime: Possible
Duration: 12 months
Start Date: 2/3 weeks
Input Date: 05/29/2018
Last Updated: 06/03/2020
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer / C++, Embedded, HWILL, AGILE, experience developing/writing COMM/NAV Avionics Software - Clearance CA

Description:
1447-1 Software Engineer
Work Location: Palmdale, CA
Status: Open

Qty: 1
Desired Start Date: 4/30/2019
End Date: 1/27/2020

Job Description:
Applicant will be the software architect responsible for embedded software definition, design, development and integration to support real-time embedded avionics software projects. The applicant will be responsible for designing, coding, testing and integrating software. Develop, analyze, integrate, and test embedded software for the Systems Integration team. Contribute to software requirements, design, code, reviews, and test of operational flight programs. Modeling and simulation efforts. Corrects program errors, prepares operating instructions, compiles documentation of program development, and analyzes system capabilities to resolve questions of program intent, output requirements, input data acquisition, programming techniques, and controls. Good oral and written communication skills required as is the ability to flex and adapt in a fast-paced team environment. Good presentation skills.

Required skills - C++, Embedded, HWILL, AGILE, experience developing/writing COMM/NAV Avionics Software

Level: Level 3: BS+6-10 YRS or MS+4-8 YRS
Pay Rate: $75.00 Hourly

Areas of Expertise Embedded Systems Yes 1 4 - 6 Years
Software Skills C++ - Advanced Level Yes 1 6 + Years
 
Job Number: JE-1447-1S
Job Location: Palmdale, CA
Rate: 75/hr negotiable
Per Diem: no
Duration: 9 months
Input Date: 05/16/2019
Last Updated: 07/31/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer / C++, Embedded, HWILL, AGILE, experience developing/writing COMM/NAV Avionics Software - Clearance CA

Description:
1644-1 Software Engineer
Work Location: Palmdale, CA
Status: Open

Qty: 4
Desired Start Date: 6/18/2019
End Date: 3/16/2020

Job Description:
The applicant will be responsible for developing, testing and integrating Object Oriented C++ software, utilizing design patterns with GitLab, VXWorks, Jira, in real time HWIL avionic systems. Candidate should have experience writing software that develops and utilizes telemetry to test vehicle management systems utilizing Gyros, Guidance, Navigation and controls with flight systems. Candidate will take documentation of program system capabilities and transpose those capabilities into an integrated embedded air vehicle system. The candidate can interface with adjacent organization i.e. Guidance, Navigations and Controls, Flight systems, Sub Systems and Systems Engineering to resolve questions of program intent and taking that intent and using advance programming techniques to develop an integrated HWIL system. Excellent oral and written communication skills required as is the ability to flex and adapt in a fast-paced team environment.

Required skills - C++, Embedded, HWILL, AGILE, experience developing/writing COMM/NAV Avionics Software

Level: Level 4: BS+11 YRS or MS+9 YRS
Pay Rate: $80.00 Hourly
Experience
Areas of Expertise Embedded Systems Yes 1 6 + Years
Software Skills C++ - Advanced Level Yes 2 6 + Years
Technical Skills Ability to code and test vehicle diagnostic related programs No 1 6 + Years
Technical Skills Hardware Integration No 1 6 + Years
 
Job Number: JE-1644-1S
Job Location: Palmdale, CA
Rate: 80/hr max
Per Diem: no
Duration: 9 months
Input Date: 07/31/2019
Last Updated: 09/04/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer GA

Description:
1513-1 Software Engineer
Work Location: Marietta, GA
Status: Open

Qty: 2
Desired Start Date: 5/6/2019
End Date: 5/6/2020

Job Description:
Applicant will be the software architect responsible for embedded software definition, design, development and integration to support real-time embedded avionics software projects. The applicant will be responsible for designing, coding, testing and integrating software. Develop, analyze, integrate, and test embedded software for the Systems Integration team. Contribute to software requirements, design, code, reviews, and test of operational flight programs. Modeling and simulation efforts. Corrects program errors, prepares operating instructions, compiles documentation of program development, and analyzes system capabilities to resolve questions of program intent, output requirements, input data acquisition, programming techniques, and controls. Good oral and written communication skills required as is the ability to flex and adapt in a fast-paced team environment. Good presentation skills.

The selected applicant will utilize advanced technical concepts in support of software products within Advanced Development Programs (ADP). The applicant will be responsible for creating real-time software, as well as algorithm design and development of engineering system modeling and data representation. This role requires a highly motivated, organized engineer that is familiar with all aspects of software development. Applicant must have excellent oral and written communication skills.

Skills Mandatory:
• Bachelors in technical discipline such as computational media or computer science or software engineering
• Strong C++ and object oriented programming/design skills
• Experience with either Linux or Windows operating environments


Skills Desired:
• Experienced Microsoft Visual Studio IDE user
• Limited experience with real-time systems and multi-threading


Level: Level 1: BS+0-2 YRS
Pay Rate: $57.00 Hourly

Software Skills C++ No 1 2 - 4 Years
Software Skills Linux No 1 1 - 2 Years
Software Skills MS Windows No 1 1 - 2 Years
 
Job Number: JE-1513-1ATO
Job Location: Marietta, GA
Rate: 57/hr
Per Diem: no
Duration: 12 months
Input Date: 06/21/2019
Last Updated: 08/13/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer(Real-time-Active secret clearnce)

Description:
Job Description:
• Our Client is looking for software engineers to use their expertise to dream up next-generation software capabilities for some amazing aerospace platforms.
• To develop cutting edge sensors and mission systems, high bandwidth communication systems, large-scale simulation systems, airplane and weapons flight controls, cybersecurity solutions and much more.
• You can also develop modeling, simulation, testing, and analysis tools using a multitude of software languages including C++, C, C#, Python, MatLab and Ada.
Basic Qualifications (Required Skills and Experience):
• Active Secret U.S. Security Clearance that has been investigated in the past 6 years
• Equivalent of 6-7+ years of experience with embedded real-time software development
• Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Desired Experience, Skills, and Qualifications:
• Equivalent of 6-7+ years of experience in Mission Systems software development
• Experience working in Agile software development framework.
 
Job Number: 201811
Job Location: St.Louis, MO
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12 Months
Start Date: ASAP
Input Date: 03/25/2019
Last Updated: 06/03/2019
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Programmer

Description:
We have an outstanding Contract to Potential Hire position for a Software Programmer to join a leading Company located in Stennis Space Center, MS.

** Candidate posses and maintain an Active Secret Security Clearance. Please click on this link if you have any questions on how to obtain a clearance https://news.clearancejobs.com/2016/06/12/obtain-security-clearance/
Position requires U.S. Citizenship.**

Seeking a motivated and energetic Software Developer to join our superb team of software professionals. We want a dedicated individual who wants to learn and expand their Java/C/C# and scripting expertise. Researches, designs, develops and/or modifies enterprise-wide systems and/or applications software.

Job Responsibilities:
Designs and codes software components, units, and modules that meet product specifications and development schedules.
Performs systems modeling, simulation, and analysis.
Tests and debugs assigned components and units.
Participates in large system and subsystem planning.
Collaborates with hardware engineers on machine characteristics that affect software systems and works with them to resolve incompatibilities.
Writes and updates technical documentation such as user manuals, system documentation, and training materials.
Troubleshoots problems and provides customer support for software operating systems and application issues.
Advises hardware engineers on machine characteristics that affect software systems, such as storage capacity, processing speed, and input/output requirements.
Maintains current knowledge of relevant technology as assigned.
Participates in special projects as required.
Plans, develops, tests, and documents client/server applications programs.
Generates new code and corrects, converts, and/or modifies existing code to meet specifications.
Prepares detailed specifications from which code will be written.
Confers with end-users to analyze specified methods and procedures, identify problems, and document specific requirements.
Writes and updates technical documentation such as users’ manuals, product specifications, and training materials.
Performs a variety of testing procedures on assigned products, analyzes test results, and corrects problems.
Maintains current knowledge of relevant technologies as assigned.
Reviews and evaluates software products, systems, and documentation to ensure adherence to company and customer quality standards as a member of an Agile Scrum Team.
Job Qualifications:
Bachelors Degree in Computer Science, Engineering or a related technical discipline, or the equivalent combination of education, technical training, or work/military experience.
Requires five years’ directly related experience in software engineering, including the design, coding, testing, and documentation of computer programs Also requires knowledge of the fundamental concepts, practices, and procedures used in software engineering and applications and systems development.
Knowledge of the fundamental concepts, practices, and procedures used in computer programming.
Development experience with Java, C, C# and/or JavaScript.
Tests and debugs assigned software components and units.
Troubleshoots problems and provides customer support for software operating systems and application issues.
Writes and updates technical documentation such as user manuals, system documentation, and training materials.
Desired Skills:
Database Application development experience.
Experience in the development of Web applications.
Experience working in an Agile Software Development Environment.
Knowledge using automated test tools.
Strong interpersonal presentation and communication skills.
 
Job Number: 35653
Job Location: Stennis Space Center, MS
Rate: $75K to $80K
Start Date: ASAP
Input Date: 06/03/2019
Firm Name: TAD PGS INC
Attention: Sean Mulshine
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Test Engineer

Description:
Must Be Eligible for a Clearance

Software Test Engineer skilled in 'C' using NI LabWindows/CVI, LabView and Test Stand, and interfacing with test equipment. Assignment will include the design, development, integration, testing, and fielding of software for a test set. Must have an understanding of electronics testing methods. Requires knowledge of industry wide tests and testing equipment. Works under little to no supervision. Produces test engineering documentation, reports, drawings (flow charts, block diagrams, and schematics). Creates and performs integration and test plans for Test Equipment validation/verification.
 
Job Number: 46068
Job Location: TX
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 06/03/2019
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Specialist Systems Engineer

Description:
Location: Huntsville, AL
Rate: $60.00 - $68.00/HR
Duration: 1 year contract
Schedule: 9/80
Overtime: Possible
Per Diem Split: Yes

**Candidates must be U.S. Citizens**
**MUST have an Active Secret Clearance or to have had one within the last 2 years**

** This is a Mechanical design focused Systems Engineer with DOORs/Specification management in a design development environment. Looking for someone who has worked on hardware systems product development, especially with aerospace and propulsion (rocket is a PLUS) experience. **

** This is a HARDWARE SYSTEMS role (not Software Systems) **

Job Description:
Without appreciable direction and exercising considerable latitude in determining technical objectives and approaches to assignments, performs in a largely independent role for the Systems Engineering organization.

Typical responsibilities include:
- May plan, conduct, and provide technical Systems Engineering direction on projects or major phases of significant project assignment, coordinating the efforts of technical support staff in the performance of assigned projects.
- Requires the use of advanced Systems Engineering techniques in management of requirements and risk for developing rocket propulsion systems.
- Assesses the feasibility and soundness of proposed engineering evaluation tests, products or equipment when necessary data are insufficient or confirmation by testing is advisable.
- Represents the organization in conferences to resolve important questions and to plan and coordinate work.
- Develops solutions to complex problems which require the use of ingenuity and creativity.
- Work is reviewed at extended intervals for desired results and achievement.
- Contacts include interacting with customer personnel on technical matters often requiring coordinated activity across organizational lines.

60% - Develops hardware and software requirements for solid, liquid, and electric rocket propulsion systems product development. Responsible for derivation, allocation, and documentation of requirements in requirements database and specifications. Coordinates requirements and related specification change management with IPT members. Defines and coordinates requirements verification plans with integrated product team members, plans and manages compliance assessment and certification.
15% - Performs functional analysis and coordinates system trade studies. Coordinates selection of optimized concept baselines through benefit/cost trades in support of definition of system architecture and objectives.
15% - Coordinates project risk assessment and management and prepares and reports results on mitigation plans.
10% - Communicates results in oral presentations and written communication.

Skills:
-9 years minimum directly related industry experience in Systems Engineering disciplines (product development cycle requirements management, risk management, integration) for aerospace/rocket propulsion system design development.
-Experience with IBM Rational DOORS requirements management software.
-Experience with MicroSoft Access strongly desired.
-Systems Engineering Planning and implementation in requirements management
-Verification planning; milestone review coordination
-Risk management coordination
-Design development cycle requirements management and verification planning (with DOORS or similar tool experience)
-Specification change management
-Interface control
-Milestone review coordination
-Risk and opportunity management coordination
-Model Based Systems Engineering (using SysML) is desired.

Education:
-Bachelor degree in Systems Engineering or appropriate discipline/science (Mechanical/Aerospace).
 
Job Number: 11078
Job Location: Huntsville, AL
Rate: $60.00 - $68.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 06/11/2019
Last Updated: 07/18/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr Technical Writer

Description:
Sr Technical Writer is directly responsible (either individually or with other team members) for the development of technical publications. This can include special projects, research and development, and aircraft safety-related content. Support the complete workflow process to ensure successful development and revision of technical publications. Comply with established quality processes to ensure accuracy, ease of use, and timely delivery of content. EWIS (Electrical Wiring Interconnection System) best practices, S1000D Technical Publication Specification, STE (Simplified Technical English), and PLM (Product Lifecycle Management) database experience desired.


Principle Duties and Responsibilities:

Sr Technical Writer with minimal to no supervision, use aircraft technical data to develop technical content that provides the information necessary for efficient return to service of the aircraft. 2. Conduct reviews, analysis, and modification of technical documents to gain a thorough understanding of complex aircraft system operation. 3. Provide training support on complex system operation and technical publications software and processes. 4. Participate with publications team to ensure department workflows and business processes are followed. 5. Proactively conduct discussions with internal/external customers in the development of source data, making sure it meets technical publication requirements. 6. Directly collaborate with Research and Development, Production, Completions Center, and Customer Support personnel to develop, review, and approve technical procedures. 7. Provide process improvement recommendations to leadership that can reduce overall department cost and/or increase productivity. 8. Contribute to development and continuous improvement of department styles, standards, operating procedures, and priorities. 9. Provide input to leadership on new processes or technology to enhance the Technical Publications business model. 10. Assist in the development of solutions to resolve technical data challenges. 11. Collaborate with leadership, team members, and other departments to develop/implement special projects. Perform other duties as assigned.

Sr Technical Writer has extensive knowledge of aircraft system methodology gained through practical experience is required. 2. Strong technical writing and communication skills are required. 3. Ability to read and interpret engineering data is required. Experience with 3-D data is desired. 4. Thorough knowledge of aircraft/hand tools, test equipment, parts nomenclature, maintenance procedures, and aircraft equipment (obtained through experience, research, or training) is required.
Education and Experience Requirements:
Bachelor's Degree or equivalent experience in the authoring of technical publications required. Four (4) years of technical publications experience, to include using industry standards to develop/revise technical documents in word processing applications. Knowledge of basic aircraft system methodology or equivalent technology is required. Proficiency in computer technology/software and typing skills is required. An A&P license and 4 years of related aircraft experience in addition to the four (4) years technical publications experience may offset the degree.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 02/16/2019
Last Updated: 06/03/2019
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Fire Protection Engineer

Description:
JSG is looking for a Sr. Fire Protection Engineer for our client in Pasadena, CA!

Our client has a position open for a Senior Fire Protection Engineer (FPE) to join the Fire Protection Engineering Division of Federal Business Unit in support of various Government Agency projects. Our client's Federal Business Unit provides a broad array of engineering design services to its clients including Fire and Life Safety Engineering and Fire Protection System Design.

ADDITIONAL RESPONSIBILITIES:

Plan, direct, and oversee engineering activities including project execution
Conduct Fire Protection Engineering inspection, studies, design, and complex calculations
Perform interpretation and application of local, state, and federal requirements, and regulations, relative to all aspects of fire protection and life safety
Prepare and present technical audits, reports, and exhibits
Design fire suppression system, fire alarm system, and prepare technical specifications
Comply with all safety policies
Complete site surveys and identify code issues and offer compliant solutions
Visit construction sites or frequent travel with an overnight stay

REQUIRED EXPERIENCE

8+ years of work experience in Fire Protection Engineering design and project management
Ability to multi-task, work with minimal supervision, follow written and oral instructions, show attention to detail and demonstrate problem-solving skills
Excellent written and verbal communication skills
Experience in using AutoCAD, Revit, and Hydraulic Calculation software
US Citizenship is required.
Candidate must have the ability to obtain US Government security clearance (SECRET)
QUALIFICATIONS

B.S. Degree, or higher, in Engineering, preferably Fire Protection Engineering
Professional Engineering (PE) License in Fire Protection Engineering
Possess certifications, training, and working knowledge of all NFPA codes and standards including NFPA13, 14, 11, 15, 16, 20, 22, 24, 25, 2001, 70, and 72

PREFERRED:

Computational Fluid Dynamics (CFD) simulation experience is a plus
Smoke control and exhaust system design experience is a plus
Temp-to-Hire (after a min. of 520 hrs worked)
Mon-Fri 8-5
 
Job Number: 372553
Job Location: Pasadena, CA
Per Diem: No
Overtime: Possible
Duration: Temp-Perm
Start Date: ASAP
Input Date: 05/14/2019
Last Updated: 08/23/2019
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Staff Electrical Engineer

Description:
Location: Phoenix, AZ
Rate: $58.00/HR
Duration: 1 year contract
Per Diem Split: No

****MUST be a U.S. Citizen or Permanent Resident****
****MUST have a Bachelors Degree****

Job Description:
- The Staff Electrical Engineer will work with a global team of engineers in Phoenix and India, on electronic control units for aerospace applications.
- The role will support the entire design life cycle from project planning efforts to entry into service and production transition support.
- Requirements definition using DOORS, detailed design, validation of requirements and verification of implementation.
- Also includes managing Problem reports for hardware that has already been delivered.
- The successful candidate will be a highly motivated self-starter with strong written and oral communication skills and works well in a team environment.
- As a Staff Electrical Engineer, this role will lead and mentor other electrical engineers throughout the entire design life cycle and support project planning efforts and ensure execution to schedule and budget.

Primary Responsibilities:
- Primary ownership of systems development processes.
- Support the development and review of systems/hardware requirements decomposed from customer specifications.
- Coordinate with systems and hardware teams to understand the cross functional requirements and constraints.
- Assess design maturity and reviewing technical risk.
- Participate in component design reviews.
- Utilize appropriate Lean Product Development tools to support cost-effective technical solutions with heavy focus on platform design, reuse, and knowledge-management
- Support project planning efforts and ensure execution to schedule and budget.
- Design responsibilities include architecture, development and analysis of RF, wireless and high speed communication links.
- Create documentation including hardware design plans, technical requirements, functional specifications, design specifications, qualification test plans and reports.
- Evaluate and approve electronic components to meet requirements for availability, performance and cost.
- Support project planning efforts and ensure execution to schedule and budget.
- Interface and support validation, verification and manufacturing engineers and technicians with product and manufacturing testing.
- Apply knowledge of DOE, FMEA, tolerance analysis, simulation and statistical methods to improve robustness and quality of electronic designs.

Qualifications:
- Bachelor's degree required.
- Proficient with analog, digital circuit design, RF and wireless systems, building, and testing circuits in a lab environment
- Good computer skills with ability to learn new programs/software
- Ability to work under pressure and within time constraints
- Excellent organizational skills with ability to multi-task amidst rapid change
- Hardware Verification experience including, test procedure development, robustness testing and debug
- Experience developing hardware/software integration plans
- Experience creating LRU level (black box) requirements based test cases and procedures, and executing systems verification testing consistent with DO-254 guidelines
- Excellent written and verbal skills
- Good computer skills with ability to learn new programs/software
- Ability to work under pressure and within time constraints
- Excellent organizational skills with ability to multi-task amidst rapid change
- Systems Verification experience including, test procedure development, robustness testing and debug
- Experience with configuration management and problem reporting tools

Preferred Qualifications:
- Experience working within DO-254 certification program(s), including Stages of Involvement (SOI) Audits under EASA or FAA
- Experience using Mentor Graphics DxDesigner and Expedition’
- Masters’ degree in Electrical Engineering.
- Experience with high reliability controller electronics and power switching circuitry.
- Familiarity with software developed in accordance with the requirements of DO-178B or DO-178C.
 
Job Number: 10408
Job Location: Phoenix, AZ
Rate: $58.00/HR
Per Diem: No
Duration: 1 yr
Input Date: 03/19/2019
Last Updated: 06/25/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Staff Electrical Engineer (Aerospace Electronic Control Units)

Description:
The Staff Electrical Engineer will work with a global team of engineers in Phoenix and India, on electronic control units for Aerospace applications. The role will support the entire design life cycle from project planning efforts to entry into service and production transition support. Requirements definition using DOORS, detailed design, validation of requirements and verification of implementation. Also includes managing Problem reports for hardware that has already been delivered.

The successful candidate will be a highly motivated self-starter with strong written and oral communication skills and works well in a team environment. As a Staff Electrical Engineer, this role will lead and mentor other electrical engineers throughout the entire design life cycle and support project planning efforts and ensure execution to schedule and budget.

Primary Responsibilities
• Primary ownership of Systems Development Processes.
• Support the development and review of Systems / Hardware requirements decomposed from customer specifications.
• Coordinate with Systems and Hardware teams to understand the cross functional requirements and constraints.
• Assess design maturity and review technical risk.
• Participate in Component Design reviews.
• Utilize appropriate Lean Product Development tools to support cost-effective technical solutions with heavy focus on platform design, reuse, and knowledge-management
• Support project planning efforts and ensure execution to schedule and budget.
• Design responsibilities include architecture, development and analysis of RF, wireless and high-speed communication links.
• Create documentation including hardware design plans, technical requirements, functional specifications, design specifications, qualification test plans and reports.
• Evaluate and approve electronic components to meet requirements for availability, performance and cost.
• Support project planning efforts and ensure execution to schedule and budget.
• Interface and support validation, verification and manufacturing engineers and technicians with product and manufacturing testing.
• Apply knowledge of DOE, FMEA, tolerance analysis, simulation and statistical methods to improve robustness and quality of electronic designs.
• Proficient with analog, digital circuit design, RF and wireless systems, building, and testing circuits in a lab environment
• Good computer skills with ability to learn new programs/software
• Ability to work under pressure and within time constraints
• Excellent organizational skills with ability to multi-task amidst rapid change
• Hardware Verification experience including, test procedure development, robustness testing and debug
• Systems Verification experience including, test procedure development, robustness testing and debug
• Experience with configuration management and problem reporting tools
• Experience developing hardware/software integration plans
• Experience creating LRU level (black box) requirements-based test cases and procedures, and executing systems verification testing consistent with DO-254 guidelines
• Excellent written and verbal skills

Preferred Qualifications
• Experience working within DO-254 certification program(s), including Stages of Involvement (SOI) Audits under EASA or FAA
• Experience using Mentor Graphics DxDesigner and Expedition
• Masters’ degree in Electrical Engineering
• Experience with high reliability controller electronics and power switching circuitry
• Familiarity with software developed in accordance with the requirements of DO-178B or DO-178C.
 
Job Number: 1910097977
Job Location: Phoenix, AZ
Duration: 1 year
Input Date: 08/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineer

Description:
Stress Engineer

Windsor Locks, CT
$65/hr
1 year W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description/Comment:
Associate must create detail finite element models of complicated assemblies must understand proper application of boundary conditions and areas that need increased mesh densities
Associate must work with designers and deliver stress plot for various load conditions for all the components in the assembly (as needed)
Associate must be proficient in NASTRAN and Patran
Bachelors degree required

Job Details:
-Associate must create detail finite element models of complicated assemblies
-must understand proper application of boundary conditions and areas that need increased mesh densities
-Associate must work with designers and deliver stress plot for various load conditions for all the components in the assembly (as needed)
-Associate must be proficient in NASTRAN and Patran
-Knowledgeable of aerospace structural design, stress and load combination techniques, factors of safety, margins of safety, and aerospace bolt calculations.
-Additional software skills include Word, Excel, PowerPoint and Mathcad calculation methods.
-This assignment will be focused on preparing aerospace stress reports for components designed for NASA's Orion space capsule
 
Job Number: 10990
Job Location: Windsor Locks, CT
Rate: 65.00
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 05/20/2019
Last Updated: 07/29/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural / Stress Engineer (Aerospace Structural Design)

Description:
The ideal candidate must:
• Create detail Finite Element Models of complicated assemblies
• Understand proper application of boundary conditions and areas that need increased mesh densities
• Work with designers and deliver stress plot for various load conditions for all the components in the assembly (as needed)
• Be proficient in NASTRAN and Patran
• Be knowledgeable of:
o Aerospace Structural Design,
o Stress and Load combination techniques,
o factors of safety,
o margins of safety, and
o Aerospace Bolt calculations.
• Additional software skills include Word, Excel, PowerPoint and Mathcad calculation methods.

This assignment will be focused on preparing Aerospace Stress Reports for components designed for NASA's Orion Space Capsule
 
Job Number: 1910102320
Job Location: Windsor Locks, CT
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 06/27/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis - WA, PA

Description:
Structural Analysis Engineer

Location: Tukwila, WA
Duration: 11 months

Job Description:
Looking for early career structural analysis engineer to support client Defense, Space and Security in the Puget Sound region of Washington State; providing support to the Presidential Airplane Recapitalization Program (VC-25B), the Poseidon Program (P-8) and/or the Puget Sound Design Center (including the T-X program).

Job responsibilities may include internal loads (FEM), static, fatigue, and/or damage tolerance stress analysis to support program design, fabrication, testing, and/or structural integrity activities.

Performs basic structural analysis using well defined analysis tools to develop the structural environment, characteristics and performance. Supports test execution and analyzes/reports test results to validate and verify systems and components meet requirements and specifications. Defines and documents certification and test results to substantiate for customers and regulatory agencies that requirements are satisfied. Supports in-service products by investigating failures and analyzing improvements. Works under general supervision.

Category Name Required Level
Software Skills Finite Element Analysis (FEA) Yes Intermediate
Software Skills Nastran Yes Intermediate
Software Skills Patran Yes Intermediate

Education / Experience:
- Must have at least a Bachelor of Science Degree in Aeronautics/Aerospace, Mechanical, or Civil Engineering. Bachelor, Master or Doctorate of Science degree from an accredited course of study. ABET is the preferred, although not required, accreditation standard.
- At least 2 or more years experience in structural or mechanical systems analysis or finite element analysis
- Experience with stress, fatigue, and/or damage tolerance analysis on primary structural components or mechanical systems

Skill Code:
63Y-Structural Analysis
 
Job Location: Tukwila, WA
Rate: Open
Per Diem: Split
Overtime: possible
Duration: 11 Months
Start Date: ASAP
Input Date: 05/24/2019
Last Updated: 08/28/2019
Firm Name: ICONMA LLC
Attention: Anusha Vuta
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer

Description:
Location: Marietta, GA
Rate: $70.57/HR
Duration: 1 year contract
Per Diem Split: Yes (if eligible)
Overtime: Possible (x1.5)

****MUST be a U.S. Citizen****

Job Description:
- Uses computational methods and tools in a specialized field (strength of metallic and composite structures, finite element analysis, fatigue and damage tolerance, etc.).
- Performs pre-dimensioning computations by implementing analytical or digital computation methods and pass judgment on the credibility of the data received and the results obtained.
- Take part in drawing up the measurement plan applicable to the tests, and analyses the results.
- Required experience with structural mechanics simulation software and ANSYS.
- Familiarity and experience with other FEA tools such as NASTRAN, other pre/post processor software, as well as knowledge of MIL-HDBK-5 is also required.
- Candidate must have working knowledge/experience with Computer Aided Design software tool CATIA V5.
- Candidate must be capable of interpreting detail, assembly, and installation type drawings.


Education:
- Level 4: BS+16 YRS or MS+14 YRS
 
Job Number: 11038
Job Location: Marietta, GA
Rate: $70.57/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 06/12/2019
Last Updated: 07/02/2019
Firm Name: