Job Search Results

729 listings were found that matched your search words: Keywords: Software ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2019/07/20 Saturday 03:26PM Pacific Time by ContractJobHunter. )

Listings 1 - 729

Go To My Job Tracker

Expand all descriptions

2555 - MANUFACTURING ENGINEER - cv word doc only - On Hold

Description:
Establish and maintain manufacturing technical sequences (Precedence).

Analyze cycle times .

Establish critical cycle time.

Define and Produce the optimal line balancing for specific rate.

Establish the detailed manpower requirement (workcenters, crew type, shift,..).

Determine Production capacity (Manpower, equipment).

Produce daily production schedule (Chart).

Collect, document and maintain manufacturing data. (loads, capacity, equipment, footprint ...).

Participate in analyzing and establishing the production standard time.

Establish detailed value stream mapping.

Establish and organize workcenter considering human and material flow. .

Manage production changes (sequence).

Identify and participate in Improvement projects.

Bachelor Degree or relevant experience in Industrial Engineering.Administration, Operations Management.

Must have organization skills, rigor and autonomy.

Have strong logical and mechanical aptitude.

Are a teamworker.

Demonstrate leadership and love challenges.

Have a great sense of initiative.

Are flexible in terms of working hours.

Have a very good knowledge of Excel and MS Project software.

Patience, perseverance and curiosity.

Experience in aerospace or cabinet manufacturing industry is an asset.
 
Job Number: 2555
Job Location: Montreal, Canada
Rate: 48.00
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 07/05/2019
Last Updated: 07/16/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ASIC Design Engineer

Description:
Description:

JOB DUTIES:

- Perform IP source code development integrating external IP from ARM and Cadence processors while adding custom logic for an exciting new project.
- Perform RTL design using Verilog

EXPERIENCE:

- 6+ years of RTL design experience using Verilog is required
- Experience integrating external IP from ARM into an ASIC is required
- Experience coding RTL for custom IP development is required
- Understands the system level, including general concepts of operating system software and hardware interactions

- Experience working with Cadence Digital Signal Processing (DSP) logic is a plus.
- Experience working on IP blocks with 1 million+ gates is a plus.
- Experience integrating ARM Coresight is a plus
 
Job Number: X20190025
Job Location: Boxborough, MA
Duration: 12 Months
Input Date: 06/23/2019
Firm Name: XPEERANT
Attention: Woody Arnold
Address: 4518 SEABOARD LN
City, State: FORT COLLINS, CO 80525
Phone: 970/282-9287
Website: www.xpeerant.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Admin Functional Support 3 CA

Description:
Admin Functional Support 3 (Job Number: 19016859)

Number of Openings: 1

Location(s): United States-California-Azusa


Shift: 1st Shift

Target Start Date: Jun 24, 2019

Target End Date: Dec 20, 2019

Pay Rate: $28 to $30/hr (based on experience)

Work Schedule: 9/80

Duration of Assignment: Approx 6 months


Performs variety of activities in support of program/business/technical unit. Gathers, collects, records, tracks and verifies data and information from multiple sources. Provides support to ensure customer requests are processed and closed on prior to customer visits. Uses software for functional area, to compile and generate reports, statistics, timelines, tables, graphs, correspondence and presentations. Must be familiar with Concur in support of program teams travel activities. Maintains calendars for multiple conference rooms and facilitates the execution of weekly customer meetings/teleconferences. Provides data and information to others on program/functional unit processes and procedures.


Basic Qualifications:

High School diploma plus 4 years of administrative duties experience.
 
Job Number: JK-1775
Job Location: Azusa, CA
Rate: 30/hr max
Per Diem: no
Duration: 6 months
Input Date: 06/12/2019
Last Updated: 07/08/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Administrative Assistant VA

Description:
164990
Job Title: Administrative Assistant

Work Site Address: Blacksburg, VA 24060
Job Number: 6043
Max Pay Rate: 16.00
Start Date: ASAP
End Date: 6-12 Months
Position Type: Contract

Job Summary:
Looking for a Part-time Administrative Assistance for our Quality Department. This position will assist in quality data entry, creating reports, and supporting other quality functions as needed. We are looking for a person with good interpersonal skills who works well on a team.

Proficiency using Microsoft Windows and Office Software (Word, Excel, Power Point, Outlook)
•Assembles and compiles data
•Organized
•Works with minimal Supervision

Qualifications and Education Requirements
• Associates Degree
• Bachelors Degree preferred (any discipline, but prefer HR)
 
Job Number: MB-6043
Job Location: Blacksburg, VA
Rate: 16/hr max
Per Diem: no
Duration: 12 months (part time)
Start Date: Part-time
Input Date: 05/23/2019
Last Updated: 06/24/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Aerodynamics Design Engineer

Description:
Chipton-Ross is seeking an Aerodynamics Design Engineer for an opening in Reno, NV.

RESPONSIBILITIES:
The Aerodynamics Design Engineer will be responsible for the aerodynamic design of the Client supersonic business jet to meet program and certification requirements. Successful candidates will have a commanding and fundamental understanding of the design and development of fighter and/or business jet class aircraft, preferably with experience developing supersonic vehicles. Candidates should have expert level knowledge of the necessary physics based trades for supersonic designs and the regulatory requirements that apply to such aircraft. The ideal candidate will have demonstrated knowledge and experience in computational fluid dynamics, analytical and theoretical performance estimation techniques, wind tunnel testing from low speed to high speed regimes (preferably supersonic), propulsion integration (preferably supersonic), and stability and control.
Perform detailed aerodynamic design and analysis in areas of aircraft shape, configuration, performance, and handling qualities.
Optimize and tune aircraft shape using CFD and other commercial or in-house advanced modeling tools including geometry modeling.
Predict aircraft aerodynamic performance using classical analytical techniques as well as advanced simulation tools.
Provide guidance in the design of airframe and control surface. components which meet design and certification requirements
Provide support to the various Systems and Structures IPTs in support of their development and certification.
Assist in the development of advanced aerodynamic analysis tools.
Provide subject-matter expert level guidance on both practical and theoretical aerodynamic aircraft design.
Provide support for engineering, certification, and flight test departments from concept to product certification.

REQUIRED EXPERIENCE:
Minimum of five years overall technical experience in aerodynamics, CFD and aerodynamic design of air vehicles.
Familiarity with computational geometry and 3D geometry modeling.
Significant experience in aerodynamic design, from concept through certification, in a collaborative multi-discipline team environment.
Experience in the development of fighter, supersonic, and/or business aircraft. Experience with advance design tools such as MDO frameworks.
Familiarity with HPC platforms and NASA CFD codes.
Advanced skills in computational geometry and familiarity with Dassault Systmes CATIA software suite.
Strong technical, interpersonal, communication, administrative, and presentation skills.
Demonstrated leadership in solving technical challenges.

EDUCATION:
Accredited Bachelor's degree Mechanical or Aerospace engineering, or similarly related field, with an advanced degree in a highly relevant technical specialty strongly preferred.

WORK HOURS:
Full-Time

 
Job Number: 177351
Job Location: Reno, NV
Rate: $DOE
Duration: Direct
Input Date: 03/01/2019
Last Updated: 07/20/2019
Firm Name: CHIPTON ROSS
Attention: Kevin Suk
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: ksuk@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerodynamics Engineer

Description:
Seeking an experienced cross-disciplinary engineer with experiences in aerodynamics, computational fluid dynamics, stability and control, loads, and thermal analysis. The candidate will build on an intimate knowledge of all aircraft systems and have the ability to support current programs and extend our tools to conduct trade studies for new project initiatives.

Responsibilities:
• Support pre-flight preparation including review of test limitations, flight test plans and procedures, flight readiness reviews, mission control room support, and post flight analysis
• Works with other engineering groups to ensure proper application of design and P&HQ requirements
• Supports entry into commercial service by ensuring that regulatory and internal company requirements related to P&HQ are met
• Develop standardized analysis and reporting tools
• Perform model updates from data collected during vehicle or component testing and data created with analytical tools
• Develop and maintain aerodynamic databases for use in analysis during all flight phases
• Develop and substantiate rational P&HQ criteria and requirements for unique vehicles with unconventional configurations
• Air Data Experience
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Anticipates and resolves issues by developing standards and guidelines for diverse engineering activities
• Ability to problem solve with a balance of technical product, cost, and schedule
• Determines technical objectives of assignments and makes decisions and recommendations that are recognized as authoritative
• Maintains current knowledge of developments in the field of specialty and/or other related spacecraft innovations to improve quality and effectiveness of product



Qualifications:
Professional Requirements
• Graduate degree in Aerospace Engineering, and/or equivalent, with minimum of 8 years of experience in aerodynamics development
• Experiences in wind-tunnel and flight test aerodynamic model validation
• Experience with full aircraft analysis – transonic required, supersonic and launch vehicle desirable
• Test plan development and data analysis experience a strong plus
• Experience in the conduct of flight test, including familiarity with standard flight test practices and safety processes strong plus.
• Working knowledge of aircraft and space systems and familiarity with relevant aerospace standards (FAA, FAA‐AST etc.)
• Advanced skills with Linux, Python, Simulink, MATLAB, Fortran, C, C++, and software development best practices.
• CATIA V5 experience preferred
• Experience with FUN3D, NSU3D, Pointwise, and/or similar RANS and gridding methods
• Applicants must be U.S. persons as defined by the ITAR (22 CFR §120.15)



The Structures Company is an AA/EOE.
 
Job Number: 314
Job Location: CA
Rate: OPEN - **DOE**
Per Diem: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 05/22/2019
Last Updated: 06/26/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Aerospace Engineer - Air Systems

Description:
  1. Support Flight Testing Activities, including but not limited to:
    1. Discuss and review test plans and preparation activities.
    2. Help determine test specifications (based upon system architecture).
    3. Attend Ground/Flight Test briefing and debriefings
    4. Participate in Test Readiness Reviews and ensure on-time Engineering deliverables.
    5. Generate developmental engineering drawings and instrumentation change requests as required.
    6. Monitor live flight data, typically via telemetry, during flight test on aircraft.
    7. Create and review Aircraft Restrictions
    8. Create and review Aircraft Troubleshootings
    9. Create, review and approve ground test procedures, flight test procedures and their corresponding test reports.
    10. Coordinate with suppliers to review technical data, certification requirements and troubleshoot any issues with supplies.
    11. Process, analyze, and draw conclusions from post flight data.
    12. Identify non-conformances, quality escapes, etc. to create rejection tags.
    13. Make assessments to ensure safety of flight determination.
    14. Document flight test design problems for long term fix.
    15. Generate and review appropriate limitations documentation.
    16. Write flight test results reports.

  2. Complete special projects and tasks assigned by Group Lead.

  • Level Requirements (Minimum):
    Education
     
  • Four (4) year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation). 
    • Other Engineering fields may be considered.

  • Experience
     
  • Four (4) years aerospace engineering experience in air systems, including experience in aircraft cabin temperature controls, low pressure cabin air distribution, avionics cooling, cabin pressurization, fire protection and anti-ice systems.



Knowledge/Skills/Abilities:
 
  • Strong knowledge of flight test operations and flight certification, including knowledge of aircraft cabin temperature controls, low pressure cabin air distribution, avionics cooling, cabin pressurization, fire protection and anti-ice systems.
  • Good leadership presence as well as people management skills: 
    • Future-oriented in thinking and operation.
    • Able to lead by example and live/work by company values.
    • Ability to successfully contribute to a positive and productive work environment.
    • Able to instill a sense of urgency in team members.
    • Able to be patient and objective in difficult situations with different types of people.

  • Strong skill set for: 
    • Professional mannerisms, appearance and actions (self-confident and committed to high ethics).
    • Strong follow-through, quick thinking and resourceful.
    • Ability to remain calm, cool and collected in stressful situations.
    • Strong sense of urgency to resolve the issue.

  • Strong organizational, time management and prioritization skills:
    • Able to multi-task, maintain focus on several different projects at one time and hit deadlines.
    • Able to be flexible with attention and priority.
    • Ability to work in a progressive, fast-paced environment (work well under pressure).

  • Strong analytical skills, with an ability to troubleshoot, problem-solve and effectively and efficiently make decisions.
  • Strong communication skills (oral, written, presentation) with both external and internal team.
    • Act as an active listener, seeking to understand and then to be understood, articulating clearly and confidently.
    • Uses people relationship and business management skills to make decisions on what and when to communicate with employees and customers.
    • Excels at communicating clearly and effectively verbally. Strong proficiency in writing summaries, documents, reports, and presentations.
    • Strong interpersonal skills, with the ability to build strong relationships at all levels. Ability to influence others as well as relate to individuals at all levels of the organization.
    • Good project management skills, including the ability to take ownership for accomplishing assigned tasks. Results-oriented planner and delegator who ensures that goals are met. Able to set priorities and keep to projected schedules.
    • Computer Skills: Comfortable and effective working in Microsoft Office. Intermediate Excel proficiency required. Able to quickly learn new software and systems. 
    • Proven track record of improving the efficiency of assigned processes or procedures.
       
       


 
Job Number: 1810087672
Job Location: Seattle, WA
Duration: 6 months
Input Date: 06/27/2018
Last Updated: 07/19/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mYpuAAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Technical Writer

Description:
Testing and Troubleshooting Writer

Location: Shelton, CT OR West Lafayette, IN OR Huntsville, AL

12+ month contract

Butler Aerospace & Defense is seeking an experienced technical writer to work in our writing group authoring the troubleshooting section of maintenance manuals. This position is in support of contracted technical manual revision services and the creation of new publications. The writer’s duties would include researching, documenting, and authoring detailed testing and troubleshooting procedures to the governing specification. The writer will be required to interface with engineers on occasion over the content and review of the publications.



Technical Skills:

Experience with writing maintenance procedures from engineering documentation in the aerospace industry.
Familiar with the operation and maintenance of aircraft systems.
Able to read and interpret assembly/installation blueprints, schematics, wiring diagrams, technical manuals, military specifications, vendor data, and various forms of engineering data.
Possess strong analytical/editorial skills. Be able to review incorporated technical data and provide feedback.
Proficient with desktop publishing using content management software.
Experience with SGML/XML structured document authoring such as EpicEditor or equivalent.
Strong computer skills with a working knowledge of Adobe Acrobat and Microsoft Office.
Preferred, but not required:
Rotary aircraft experience
Avionics technician, or equivalent military experience in aircraft maintenance
Familiar with the use of aircraft technical manuals and related technical data
Experience with Content@ content management software and XyVision publishing software
Experience with specification S1000D
Personal Skills:

Detail-oriented
Process/analytical-oriented
Task/goal-oriented
Team-oriented
Quality-driven
Strong professional communication skills/ability to interact effectively with coworkers
Strong organizational/time management skills
Self motivated
Ability to work under pressure and meet deadlines
Manage multiple jobs with tight deadlines in fast-paced environment
Strong, customer-focused work ethic and positive attitude
Mentoring


Work Experience:

5 years technical writing experience


Areas of Responsibility:

Research, writing, and development of portions of aircraft maintenance manual revisions according to the governing specification and published standard work
Develop concise, complete, technically accurate, and easy to understand technical information in a timely fashion with a very high level of quality
Conduct technical reviews of other writers’ work. Reviews and analyzes the technical information/documents that are incorporated into technical manuals
Provide frequent status
Meet internal and external delivery milestones


Education:

4 year college degree
Work Environment:

Office environment














____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 57051
Job Location: CT, IN, or AL, CT, IN, or AL
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12+ months
Start Date: ASAP
Input Date: 07/05/2019
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Fuel Inerting Systems Engineer - China

Description:
Our Aerospace Client based in China is looking for additional Engineering Support . They require an Aircraft Fuel Inerting Systems Engineer.

This is an exciting opportunity to work in East Asia , contributing to the success of our Client's Aircraft Program. Excellent salary / remuneration for suitable skilled and qualified candidates.

Candidates should be prepared to live and work in Shanghai on a fixed term contract basis for 1-3 years.

Please quote ref: JO0009 on application.



Responsibilities:

Fuel system performance simulation and analysis.
Inerting system performance simulation and analysis.
Fuel tank flammability analysis .
Fuel and inerting system tube stress analysis.
Fuel and inerting system simulation platform building.


Skills/ Qualifications / Experience Sought:


Experience working for main OEM or fuel and inerting system supplier for more than
20 years.
Experience on fuel and inerting system simulation more than 15 years.
Familiar with simulation software, such as Flowmaster, Fluent, CAEPipe, Matlab, Abaqus, etc.
Fluent English, with good communication.
 
Job Number: BHJOB28358_55
Job Location: China
Rate: Negotiable
Duration: 1-3 years
Start Date: 01/09/2019
Input Date: 07/04/2019
Firm Name: STRONGFIELD TECHNOLOGIES USA INC
Attention: Graham Bird
Address: 5000 BIRCH ST STE 3000
City, State: NEWPORT BEACH, CA 92660
Website: www.strongfield.com

Aircraft Operations Analyst

Description:
PDS Tech is seeking a top performer for a key role within the Sales & Marketing Team. You are a marketing specialist and an experienced industry expert, expected to provide world-class solutions for our teams, our customers and prospects in support of marketing the Company's family of aircraft against competitor types.  You understand industry and customer needs in order to support all objectives of the Marketing team.

In this role, you are the subject matter expert (SME) for aircraft performance analysis and the aircraft performance analysis tool used by marketing, in order to help promote the operational advantages of the Company's family of aircraft.  You will also manage, maintain and administer the performance analysis tool used by marketing.

Responsibilities include:
 
  • Analyze complex problems in the areas of aircraft performance and aircraft operations and possess initiative and judgment to recognize implications of results in supporting marketing and sales strategies.
  • Propose solutions to unusual problems and make recommendations that are generally accepted as accurate and feasible.
  • Support both structured and ad hoc training requirements to develop the subject matter discipline within the Marketing team.
  • Act as focal and SME for Marketing’s aircraft performance analysis tool and provide input and guidance into the tool’s maintenance and development.
  • Liaison with Engineering and assist in managing relationships with 3rd party suppliers.

  • Degree in Mathematics, Sciences, Engineering, Transportation Planning and Management or similar preferred.
  • A minimum of three (3) years of experience in Aircraft Performance Engineering. 
  • A good working knowledge of the various worldwide certification requirements (FAR, TC, EASA) and in particular FAR 25 and FAR Part 121.
  • Airline Dispatch and/or Airline Flight Operations experience an asset.
  • You are familiar with the basic features of many regional aircraft type.
  • Good presentation and communication skills combined with exceptional analytical capability and attention to detail.
  • Strong computing skills that include programming experience and software development, along with expert level proficiency in Excel and Powerpoint.
  • Strong written and verbal English skills; other languages are considered an asset.
  • Pilot’s license is considered an asset.

 
Job Number: 1810092773
Job Location: Nagoya,
Duration: 12 months
Input Date: 05/02/2019
Last Updated: 07/19/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002f54DAAQ&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Parts/ Service Clerks

Description:
STS Technical Services is hiring Parts / Service Clerks in Las Vegas, Nevada.

Essential Duties & Responsibilities:
Perform data entry into Invoicing software and maintenance software as required, coordinate parts orders and assist in inventory control.
Follow up with customers on aging invoices.
Maintain accurate and complete filing systems for vendors and customers
Assist in daily invoicing of all completed work orders and parts sales
Accurately receive parts into Inventory software system
Coordinate parts orders
Maintain accurate inventory levels
Responsible for establishing and maintaining a file system
Assist in performing accurate and on time EOM close reports
Continue to receive ongoing training to gain knowledge of the industry
Provide managers updates on new business
Perform Data entry into customers maintenance programs as required
Process vendor invoices to corporate office
Make regular sales calls to increase parts sales
Coordinate daily service and parts transactions
Responsible to accurately invoice repair orders
Responsible to accurately receive parts into inventory
Coordinate requests from customers on Service and parts transactions
Communicate safety concerns with in the operation to management
Communicate customer requests for service to management
Maintain a clean and organized work environment
Qualifications:
High School Diploma
Valid Driver’s License
Good oral and written communication skills
PC literate, Strong word processing skills
Ability to prioritize and organize
Prior work experience in a mechanical work environment
Minimum 1-year experience in a service oriented office environment
Ability to attain Airport issued ID badge Notes from the hiring manager
Relevant experience with automotive parts and/or material handling.
The person we are looking for will need to have a strong back ground in those areas as well as computer skills – basic excel skills are required.
Company Overview & Benefits:
STS Technical Services offers hundreds of career opportunities throughout the United States, and with more than two decades of experience, our aviation recruiters soar in their commitment to excellence and professionalism.

We proudly offer all qualifying candidates competitive rates, direct deposits, medical insurance, cash advances and referral bonuses. Have questions? Contact us today at 1-800-359-4787.
 
Job Number: 47780
Job Location: Las Vegas, NV
Input Date: 06/04/2019
Last Updated: 06/13/2019
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Automation Controls Electrical Engineer

Description:
Chipton-Ross is seeking an Automation Controls Electrical Engineer for an opportunity in Los Angeles HQ

RESPONSIBILITIES:
THE PURPOSE:
The Automation Team serves to support the development, manufacturing, and installation of Client systems globally. The team specifies, designs, procures, and fabricates a wide variety of automated manufacturing and assembly/installation equipment. The Electrical Engineer is an integral member of the Automation Team who provides expertise and capability in electrical, pneumatic, and hydraulic design to enable the success of departmental projects.

THE ROLE:

The Electrical Engineer will be responsible for owning the electrical, pneumatic, and hydraulic aspects of various automation and machine control projects. These may vary from small R&D tasks to large scale production equipment. The Electrical Engineer will work with internal customers to define the needs and specifications for their projects. These projects will generally be interdisciplinary, and the engineer will work with other members of the Automation Team (software, mechanical, and applications engineers) to deliver an integrated and functional solution.

Responsibilities include:
-Developing, testing, installing, and integrating electrical, pneumatic, and hydraulic solutions related to high speed custom automation, machine vision, feedback systems, and robotics.
-Working with internal customers to define functional and safety requirements
-Working with interdisciplinary teams on mechanical and software integration
-Working with electrical contractors and 3rd party integrators to deliver fully integrated solutions.
-Debugging and optimizing automated processes.
-Auditing internal and 3rd party equipment for electrical design compliance
-Creating interconnection diagrams/spreadsheets for field technicians.
-Supporting equipment deployment at Client One facilities and vendor facilities as needed

THE CANDIDATE:

The candidate must be an experienced engineer with demonstrated talent and capability in electrical, pneumatic, and hydraulic system design. He or she must be able to show a track record of successful industrial machine controls and automation design and implementation.

"He or she must be an excellent communicator, and thrive in a high-energy, quick-moving, and interdisciplinary workplace.
"Comfortable working cross-functionally"

MINIMUM REQUIRED EXPERIENCE:
-Have an excellent understanding of NFPA-79, ISO-13849, UL508A and OSHA standards.
-Have experience designing professional schematics (electrical, pneumatic and hydraulic) in AutoCAD electrical.
-Have experience with Allen Bradley and Siemens PLC's.
-Have experience with Servo's, VFD's and motion controls.
-Have excellent troubleshooting skills.
-Proficiency with process integration and electromechanical systems.
-Have experience with a wide variety of industrial sensors and production equipment.

PREFERRED EXPERIENCE:
-BS in electrical engineering.
-5+ years of experience as a hands-on controls engineer, designing industrial controls equipment.
-Have experience with industrial robots. (Fanuc, Kuka, Motoman)
-Experience with vision systems. (Cognex, Keyence)
-Have experience with safety PLC's
-Is proficient in ladder logic.

EDUCATION:
Accredited Bachelor's Degree

WORK HOURS:
Full-Time
40 hours per week
 
Job Number: 179631
Job Location: Los Angeles,
Rate: $DOE
Duration: 1-3 months
Input Date: 05/30/2019
Last Updated: 07/20/2019
Firm Name: CHIPTON ROSS
Attention: Christophor Long
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: clong@chiptonross.com
Website: www.chiptonross.com

Automation Software Developers

Description:
OOP-object oriented programming, high speed
 
Job Location: Midwest
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: ccastro@advancedtechno.com
Website: www.advancedtechno.com

Avionics Engineer

Description:
Location: Fort Worth, TX
Duration: 6 month contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)


****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****


Job Description:
- Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
- Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.
- This position is for an engineer working in the Fort Worth IFG Aircraft Computers Team.
- Job responsibilities will include supporting development of Avionics Mission Computers on aircraft.
- Must be able to work in a fast paced environment and be able to work independently with limited oversight from team lead and manager.
- Must able to travel both domestic and internationally.


Activities include:
- Electronic hardware testing and troubleshooting
- Support Software Development efforts for target hardware
- Review and improve Hardware Specifications
- Work with Suppliers & Engineering during product development lifecycle
- Support of system integration activities
- Development/review of detailed engineering documents for software and hardware release
- Financial analysis of planned team activities
- Development of estimates to complete, development of customer estimates
- Generation of slide presentations in support of customer briefings
- Support development of Supplier Statement of Work & Proposals
- Work closely with Supply Chain Management


Education:
- Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 10333
Job Location: Fort Worth, TX
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 03/19/2019
Last Updated: 07/18/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Avionics Engineer - Clearance TX

Description:
163995
1334-1 Avionics Engineer
Work Location: Fort Worth, TX
Status: Open

Qty: 1
Desired Start Date: 2/4/2019
End Date: 9/13/2019

Job Description:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

This position is for an engineer working in the Fort Worth IFG Aircraft Computers Team. Job responsibilities will include supporting development of Avionics Mission Computers on aircraft.
Activities include:
• Electronic hardware testing and troubleshooting
• Support Software Development efforts for target hardware
• Review and improve Hardware Specifications
• Work with Suppliers & Engineering during product development lifecycle
• Support of system integration activities
• Development/review of detailed engineering documents for software and hardware release
• Financial analysis of planned team activities
• Development of estimates to complete, development of customer estimates
• Generation of a slide presentations in support of customer briefings
• Support development of Supplier Statement of Work & Proposals
• Work closely with Supply Chain Management
Must be able to work in a fast paced environment and be able to work independently with limited oversight from team lead and manager. Must able to travel both domestic and internationally.

Work Location: Fort Worth, TX
Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
Pay Rate: $62.00 Hourly
 
Job Number: JE-1334-1S
Job Location: Fort Worth, TX
Rate: 62/hr max
Per Diem: no
Duration: 7 months
Input Date: 01/28/2019
Last Updated: 07/18/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Avionics Test Engineer

Description:
We are seeking a Test Conductor / Test Engineer for our Avionics System Integration Rig (ASIR). The test rig is a static test bench for all of the Avionics Systems on the aircraft with a simulation host computer to stimulate the systems.  Candidates should have experience and be familiar with how to conduct systems testing on a test bench or static simulator.

This position requires the development and test of Engineering Test Procedures (Test Cards) based on the Engineering Test Spec requirements from the Avionics Design group, and the creation of Test Reports following the tests to document the results.  Test Cards will be created using in-house developed tools however general experience with test card creation is required.  Support investigations and troubleshooting of test rig and/or systems related snags, coming from either the rig test or flight test programs.

The primary work location will be in Seattle, WA, USA. Business trips to required sites may be requested, including Nagoya and Moses Lake where engineering tasks (Nagoya) and intensive flight tests (Moses Lake) are carried out.

Scope of Work:
  • Development and test of Engineering Test Procedures (Test Cards) using in house tools.
  • Creation of Test Reports following the tests to document the results.
  • Support investigations and troubleshooting of test rig and/or systems related snags, coming from either the rig test or flight test programs.
  • Support the Configuration Management of the Test Rig
  • Facilities planning,
  • Creation and carrying out of Rig Maintenance Procedures,
  • Test Video Recording & Equipment management,
  • Software Loading following provided instructions.

 
 
Job Number: 1910097155
Job Location: Seattle, WA
Duration: 12 months
Input Date: 01/14/2019
Last Updated: 07/19/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002r7MpQAI&URLSource=cjhunter

Avionics and Electrical Systems- UM

Description:
PDS Tech Inc is seeking a  Avionic and Electrical Systems - UM in Wichita, KS

JOB RESPONSIBILITIES:

This role will gain valuable engineering experience in the area of design requirements including capture, design, validation, troubleshooting, and certification of aircraft avionic and electrical systems. Working with managers and key players in Engineering, Candidates will assist in the development and evaluation of crucial systems on Textron Aviation Products. Prepare engineering drawings for avionics and electrical system interface wiring using computer based drafting tools (CATIA/CCD and/or IAI HarnesSys). Utilize electronic test equipment to verify avionics and electrical systems meet design requirements, and/or for system troubleshooting in the lab and on aircraft. Prepare engineering trade studies, functional test procedures, certification plans, ground and flight test plans, certification reports, and other engineering documents. Write technical descriptions of subject matter pertinent to design or test requirements. Includes descriptions of supplier parts, test or rigging specifications, etc. Assist with the evaluation and analysis of avionics and electrical system design for completion of function hazard assessments and system safety assessments.


 
 



 
Job Responsibilities:
• DER/UM-related duties missing; ensuring that the proposed design is certifiable, coordinating with the FAA, resolution of certification issues, determination of the certification basis, writing the certification plan, witnessing certification testing, find compliance.
• Responsible for successful integration and certification of vendor equipment into Cessna Citation aircraft. Assists in preparation of reports, engineering drawings, reports and other documents. Coordinates with direct and indirect customers and suppliers to determine system requirements and resolve problems.
• Responsible for completing complex development, design, testing and certification assignments for new design or modifications. Develops creative, scientific alternatives during course of job assignments to reach desired outcome.
• Conducts research, calculations, estimates and drafting of projects to conform with established specifications such as capacities, styling, performance and determine status of work in progress. Performs above work utilizing frequent application of in-depth engineering principles.
• Maintain a high degree of proficiency in computer applications to accomplish tasks.
• Consults and coordinates with other engineering and manufacturing personnel to coordinate design function and resolve technical problems. Consults with supplier to discuss and remedy issues in a timelier and efficient manner.
• Requests and coordinates work performed by Engineering support groups, Experimental, Manufacturing and Supply Chain Management for the project. Instructs suppliers as to materials, equipment and hardware for utilization on aircraft in accordance with approved specifications.
• Maintains contact with Product Support Engineering and production departments to resolve engineering problems impeding production and to assist in the incorporation of new design concepts and changes.
• Monitors and conducts analyses on first article fabrication and operation to assure adequacy of design.
• Reviews and evaluates supplier proposals for potential utilization on future models.
• Provides guidance to engineers and report writers in the solution of specific, complex design problems, which must be resolved during development and testing.
• Assures supervision awareness of program status, problems and successes. Provides periodic design reviews and update presentations to management of engineering and other company organizationsand tools.

 
Education and Experience:
• B.S. or advanced degree in Aeronautical, Mechanical, or Electrical Engineering, Physics, Math, Statistics or related technical degree required
• Minimum 7 years of experience in General Aviation or Business Aircraft development programs

• Avionics and Electrical System DER qualifications (FAR 23 or 25).
• Experience with domestic and foreign business and/or general aviation aircraft certification process is required
• Some experience in system assessment using modeling tools such as Failure Modes and Effect Analysis (FMEA), (Failure Modes and Effect Criticality Analysis (FMECA), Reliability Block Diagram (RBD), and Fault Trees Analysis (FTA) is desired.
• Experience with Microsoft Office software application and working environment is required.
• The candidate must be able to work in a team environment and be able to clearly communicate thoughts and ideas with peers, management, and certification authorities.

 
 
Job Number: 1910097710
Job Location: Wichita, KS
Duration: 6 months
Input Date: 03/14/2019
Last Updated: 07/19/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Marjorie Santiago-Marquez
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002r9TlQAI&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Business Relationship Manager

Description:
Location: Sacramento, CA
Rate: $36.00 - $43.00/HR
Duration: 9 month contract

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role **

Duties:
Within the Indirect Procurement organization, this position is responsible for day to day category management. Serve primarily as the AR Business Relationship Manager to various AR stakeholders and secondarily as the liaison manager to 3rd party outsource providers during the delivery of Indirect Procurement services. Drive teams to execute on contract terms and conditions and work with 3rd party outsource provider category/delivery managers to ensure on-time delivery of projects and sourcing events.

Key Responsibilities
Serve as the AR stakeholder liaison for Indirect Procurement activities with a primary emphasis in Corporate and Professional Services. Experience with IT software (Cloud, SaaS, COTS, etc.) contract negotiations, or Facilities & Site Services and MRO, or Capital Equipment (CapEx) and Capital Construction is a plus. (20%)

Performance Management: Using Service Level or Key Performance methodologies track and analyze vendor performance, generate reports as required, provide operational oversight, assess and execute penalties or incentives per contract terms. Identify issues and opportunities and provide recommendations for performance improvement and, when necessary, implement action plans accordingly. (25%)

Contract Administration: Be the subject matter expert on contracts pertaining to outsourced 3rd party arrangement, including terms and conditions, financial provisions, roles and responsibilities and all supporting documents. Team lead in contract formulation, negotiations, and post-award change control. Using data driven analytics, evaluate and monitor contracts to ensure vendors comply with all contractual terms and conditions. Act as the liaison between AR Legal and vendors. Serve as an informal SME and on-the-job training resource for vendor delivery managers and/or AR stakeholder groups. (25%)

Relationship Management: Establish strong partnerships with AR stakeholders to ensure effective planning and collaboration on appropriate vendor/contractual related matters. Effectively manage relationship with vendor account/delivery managers to ensure consistent service delivery and customer satisfaction. Facilitate communication and coordination of activities between AR stakeholders and vendor delivery managers and project teams. Coordinate vendor activities as they relate to customer initiatives, program enhancements and new implementations. Lead or be a key participant in problem resolution activities, utilizing a governance model as depicted in the contract(s). (25%)

Project Management: Lead or support cross-functional project teams to develop efficient processes aligned with long-term corporate goals. Adapt or create new and effective processes as necessary. Manage broad functional projects and/or participate as a contract SME on larger project or initiatives. (5%)


Skills:
- Experience in a Corporate and Professional Services, or IT software (Cloud, SaaS, COTS, etc.) or Facilities & Site Services and MRO, or Capital Equipment or Facilities related Category Management environment is preferred.
- Experience in a in a third party outsourcing function that included accountability for complex tasks and/or projects required for successful execution is preferred.
- Demonstrated skills in contract formulation.
- Prior experience in negotiating and analyzing contracts along with knowledge of vendor performance metrics preferred.
- Ability to influence others and, be a key contributor or leader on Facilities & Site Services and MRO project teams.
- Contract negotiation and excellent written/verbal communication skills.
- Proficiency with Microsoft Office Word, PowerPoint and Excel; knowledge of other Microsoft Office products.

Education:
- Bachelor's degree required plus minimum of 3-5 years related experience; or equivalent combination of education and experience.
 
Job Number: 10814
Job Location: Sacramento, CA
Rate: $36.00 - $43.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 9 mos
Start Date: ASAP
Input Date: 04/19/2019
Last Updated: 06/25/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Buyer 3

Description:
Chipton-Ross is seeking a Buyer 3 for an opening in Grand Prairie, TX.

RESPONSIBILITIES:
This Buyer will implement supply chain strategies resulting in annualized cost reduction, prepare and release RFQ's, perform selection, negotiate and contract execution with targeted suppliers. Will play a significant part in cost reduction efforts.
" Sources, purchases, plans, and schedules the movement of Direct Materials; parts, components, finished goods and related material through production and inventory process.
" Manages/Accountable for Supplier Relationships as assigned
" Identifies raw material, component, and related requirements from engineering and production specifications and schedules.
" Purchases, plans, and coordinates resulting material movement throughout manufacturing and inventory sequences.
" Analyzes data and determines factors that affect prices and determines lowest cost consistent with quality, reliability, and ability to meet required schedules.
" Reviews proposals, negotiates prices, selects or recommends suppliers, analyzes trends, follows up orders placed, approves payment, and maintains necessary records of material movement throughout manufacturing and inventory cycle(s)
" Coordinates and follows up with production, warehouse, and engineering personnel to ensure appropriate procurement, scheduling, and movement of materials and services.

REQUIRED EXPERIENCE:
" Aerospace/automotive industry background Experience with SAP software
" Knowledge of machine parts, sheetmetal and structural assembly manufacturing.
" Strong Supplier Management Capabilities
" Knowledge of manufacturing methods and processes utilized in the manufacturing of aerospace structures and assemblies.
" Willingness and ability to support required business travel.
" Computer proficiency with Excel and PowerPoint.

EDUCATION:
Accredited BA/BS Degree or equivalent and 6 years of related procurement experience.

WORK HOURS:
Full-Time

 
Job Number: 179820
Job Location: Grand Prairie, TX
Rate: Up to $30.00 DOE
Duration: 6+ Months
Input Date: 06/12/2019
Last Updated: 07/20/2019
Firm Name: CHIPTON ROSS
Attention: Silmese Graves
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: sgraves@chiptonross.com
Website: www.chiptonross.com

Buyer/Procurement Analyst - Clearance KY

Description:
165156/1617-1
Buyer/Procurement Analyst
Work Location: Lexington, KY
Status: Open

Qty: 2
Desired Start Date: 6/3/2019
End Date: 12/31/2019

Job Description:
Sources, purchases, plans, and schedules the movement of raw materials, packaging materials, parts, components, services, supplies, finished goods and related material through production and inventory process. Identifies raw material, component, and related requirements from engineering and production specifications and schedules. Purchases, plans, and coordinates resulting material movement throughout manufacturing and inventory sequences. in front-end procurement mode, analyzes data and determines factors that affect prices and determines lowest cost consistent with quality, reliability, and ability to meet required schedules. Reviews proposals, negotiates prices, selects or recommends suppliers, analyzes trends, follows up orders placed, approves payment, and maintains necessary records of material movement throughout manufacturing and inventory cycle(s). Coordinates and follows up with production, warehouse, and engineering personnel to ensure appropriate procurement, scheduling, and movement of materials and services.

Work Location: Lexington, KY
Level: Level 2: BS+3-5 YRS or MS+0-3 YRS
Pay Rate: $18.00 - $34.20 Hourly

Areas of Expertise Supply Chain No 1 1 - 2 Years
Software Skills MS Office Yes 1 1 - 2 Years
 
Job Number: JE-1617-1S
Job Location: Lexington, KY
Rate: 34.20/hr max
Duration: 5 months
Input Date: 06/07/2019
Last Updated: 07/18/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

C++ Real Time Software Engineers

Description:
Software Engineers
Positions can be located at multiple sites:
Oklahoma City, OK 73145 / 73150 / 73135
El Segundo, CA 90245

Secret, TOP Secret AND non-cleared positions, at various skill levels

Tasks may include:
  • Lead, Develop and Maintain Code and integrate software components into a fully functional software system.
  • Develop, document, and maintain architectures, requirements, algorithms, interfaces and designs for software systems.
  • Requirements analysis, design, development, test, documentation, licensing, troubleshooting, and user support; custom operating system development; tool design and maintenance; research and development projects; trade studies; risk assessments; and support to software testing.
  • Execution of systems and software testing to verify operational and functional requirements. Assists with test procedures and documenting test results to ensure software system requirements are met.
  • Support software project management and software supplier management functions.
  • Select, tailor and deploy processes and tools; establish metrics.
  • Design, develop, implement, test and document software for surveillance aircraft platforms that enable air superiority by detecting, identifying, and tracking airborne threats and providing operators intuitive battle management controls.
  • Serve as a subject matter expert for software domains, system-specific issues, processes and regulations.
  • Positions include Leads as well as team members in the avionics software organization working closely with other software engineers, systems engineers, other disciplines, customers, suppliers and field service representatives.

 Bachelor's degree in an engineering classification.
 
Experience with any of the following:
  • C, C++, C#, Java, ADA, DXL, Chef, Puppet, Ansible
  • Java Script, Python, shell, Perl Scripting languages
  • Rhapsody, Rational, TFS, ClearCase, ClearQuest, Team Concert, Jenkins, Coverity, Eclipse
  • Real Time, Embedded, ROTS, Doors, Agile
  • Unix, Linux Windows
     

Contact Elisabeth Laspe at 314-482-3991 or elaspe@pdstech.com to discuss these opportunities.
 
Job Number: 1810088612
Job Location: Lexington Park, MD
Duration: 12 months
Input Date: 09/11/2018
Last Updated: 07/19/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Elisabeth Laspe
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mcb7AAA&URLSource=cjhunter

C++ Real Time Software Engineers

Description:
Software Engineers
Positions can be located at multiple sites:
Oklahoma City, OK 73145 / 73150 / 73135
El Segundo, CA 90245

Secret, TOP Secret AND non-cleared positions, at various skill levels

Tasks may include:
  • Lead, Develop and Maintain Code and integrate software components into a fully functional software system.
  • Develop, document, and maintain architectures, requirements, algorithms, interfaces and designs for software systems.
  • Requirements analysis, design, development, test, documentation, licensing, troubleshooting, and user support; custom operating system development; tool design and maintenance; research and development projects; trade studies; risk assessments; and support to software testing.
  • Execution of systems and software testing to verify operational and functional requirements. Assists with test procedures and documenting test results to ensure software system requirements are met.
  • Support software project management and software supplier management functions.
  • Select, tailor and deploy processes and tools; establish metrics.
  • Design, develop, implement, test and document software for surveillance aircraft platforms that enable air superiority by detecting, identifying, and tracking airborne threats and providing operators intuitive battle management controls.
  • Serve as a subject matter expert for software domains, system-specific issues, processes and regulations.
  • Positions include Leads as well as team members in the avionics software organization working closely with other software engineers, systems engineers, other disciplines, customers, suppliers and field service representatives.

 Bachelor's degree in an engineering classification.
 
Experience with any of the following:
  • C, C++, C#, Java, ADA, DXL, Chef, Puppet, Ansible
  • Java Script, Python, shell, Perl Scripting languages
  • Rhapsody, Rational, TFS, ClearCase, ClearQuest, Team Concert, Jenkins, Coverity, Eclipse
  • Real Time, Embedded, ROTS, Doors, Agile
  • Unix, Linux Windows
     

Contact Elisabeth Laspe at 314-482-3991 or elaspe@pdstech.com to discuss these opportunities.
 
Job Number: 1810088609
Job Location: Palmdale, CA
Duration: 12 months
Input Date: 07/18/2018
Last Updated: 07/19/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Elisabeth Laspe
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mcanAAA&URLSource=cjhunter

C++ SW Engr - Interim Clearance

Description:
PDS Tech, Inc. is seeking a SVTAD / Software Engineer, in Tewksbury, MA 01876

NOTE: 12 Months Contract. Applicant must be a US Citizen  

Job Description:

  • The successful candidate will be responsible for designing, implementing, debugging and fixing problems with the Radar software applications, as well as supporting software integration and verification efforts.
  • Our radar software applications, including implementations of signal processing algorithms and time critical control functions, involved in direct control of sensor systems,  are developed using C++ and Java programming languages running Linux or UNIX operating systems on a variety of computing platforms.
  • This position will also include working closely with Software Architects and Principal Systems, Hardware, and Software engineers to interpret requirements and correctly implement these requirements in software.
  • There are travel opportunities available to support the radar systems at various sites.U.S.
  • Citizenship status is required as this position needs  an active  U.S. Security Clearance within one year of  employment.

Contact: skhan@pdstech.com/ Direct # 314-665-2124
Required Skills:
  • 6 plus years’ experience on all phases of Software Engineering.
  • Experience with C++• Linux or UNIX experience
  • Experience developing software in a team based development environment, preferably Agile/SCRUM
  • Broad real-time, multi-threaded software development experience
  • Software development experience of a Signal Processing application
  • Experience in developing and optimizing algorithms for performance
  • US citizenship is required.
  • Interim Secret Clearance required to start.

Desired Skills:

  • Excellent verbal and written communication skills
  • Experience in Agile development methods, including Scrum, automated testing and continuous integration
  • Software development experience in a DoD environment
  • Radar domain knowledge
  • Strong problem solving ability
  • Self-starter and ability to lead development, integration and test activities
  • Familiarity with the following Software Tools: Rational Rhapsody, Clear Case and Team Concert, Jenkins, DOORS
  • Strong Object-Oriented Design Knowledge including UML
  • Direct experience implementing complex signal processing algorithms in C++ meeting latency and throughput performance requirements or experience in implementing complex control operations in software with defined performance timelines• Master's Degree in Computer Science, Computer Engineering, Electrical Engineering, Mathematics, or Software Engineering
  • Current secret clearance or the ability to obtain a secret clearance

Required Education (Including Major):

  • BS degree in Computer Science, Computer Engineering, Electrical Engineering, Mathematics, or Software EngineeringKEYWORDS:  C++, Linux, UNIX, Java, OOD,  real-time software development, Agile, Scrum, Signal Processing-DSP091417 source Code, Source Code DSPEVENTSRAYIDS  


 
 
Job Number: 1810090261
Job Location: Tewksbury, MA
Duration: 12 months
Input Date: 10/11/2018
Last Updated: 07/19/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Elisabeth Laspe
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mjZkAAI&URLSource=cjhunter

C++ SW Engr Req.Top Secret Clearance, St.Louis, MO 63134

Description:
PDS Tech, Inc. is seeking a Software Engineer in Berkeley, MO.

NOTE: 6 Months Contract with possible extension and Must have Active DoD Top Secret Clearance

  • Travel: 10% of the time to support a customer in Fallon, NV one or two weeks out of the year.

Summary:

  • Develops, documents and maintains architectures, requirements, algorithms, interfaces and designs for software systems.
  • Develops and maintains code and integrates software components into a fully functional software system.
  • Develops software verification plans, test procedures and test environments, executing the test procedures and documenting test results to ensure software system requirements are met.
  • Performs software project management and software supplier management functions.
  • Develops, selects, tailors and deploys software processes, tools and metrics.
  • Executes and documents software research and development projects.
  • Serves as a subject matter expert for software domains, system-specific issues, processes and regulations.
  • Tracks and evaluates software team and supplier performance to ensure product and process conformance to project plans and industry standards.
  • Works under general direction.

Prerequisites:
  • Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.


CategoryNameRequired  
Software SkillsC++Yes   
Software SkillsC++ - Expert LevelNo   
Software SkillsLinuxNo   
Technical SkillsAgile methodologyNo

 
Job Number: 1910099381
Job Location: Saint Louis, MO
Duration: 6 months
Input Date: 02/25/2019
Last Updated: 07/19/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Elisabeth Laspe
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002jWMzQAM&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
C++ Embedded or Kernel Software Developer

Description:
Senior C++ Embedded or Kernel Software Developer

Fast Platform Modeling team is seeking a system-software developer to join our Modeling team in Austin. Fast Platform Models simulate software visible behavior of AMD’s next generation designs. They are designed to enable pre-silicon development of firmware, system and application software. They also facilitate emulation acceleration, performance and power modeling.

Requirements:

- B.S or higher in Computer Engineering or Computer Science with 3+ years’ experience. (Open to
new grads with M.S or PhD)
- Strong systems architecture and systems software background.
- Experience in writing high-performance system and application software in C++ in Windows
and/or Linux environments.
- Experience with kernel/driver debugging.
- Experience in functional modeling, architecture simulation or hypervisor development would be
a plus.

Responsibilities:

- Develop functional models for Processor, Graphics and I/O IPs.
- Improve functionality, stability and performance of existing models.
- Work closely with architecture teams to understand and model new designs.
- Develop test plans and tests for functional models.
- Work with internal and externals customer to help debug problems running their workloads
on the models.
 
Job Number: x20190059
Job Location: Austin, TX
Duration: 6 Months
Input Date: 06/23/2019
Firm Name: XPEERANT
Attention: Woody Arnold
Address: 4518 SEABOARD LN
City, State: FORT COLLINS, CO 80525
Phone: 970/282-9287
Website: www.xpeerant.com

C, C++ RTOS Software Engineer Secret Clearance

Description:
*This is a 1 year, contract position, located ON SITE in Orlando, FL*


We are hiring a contract Real Time embedded C++ software engineer who will be working on Secret/Top Secret projects for a military/DoD subcontractor. The position requires a candidate with strong background in the full development lifecycle including architecture design. Applicant will be working on supporting integration of software functionality into tactical military hardware.


All work is conducted ON SITE only, by US Citizens who are actively SECRET Cleared


Required
*4-8+ years in a DoD software role, developing software in embedded C/C++.
*Experience with VxWorks/Linux or Integrity RTOS environment

*Current Active (or active in last 2 years) Secret Clearance; which requires US Citizenship in order to apply.
*BS degree in Engineering, Computer Science or equivalent



Pluses:
*Familiar with communication busses/protocols such as RS-232, RS-422, MIL-STD-1553 and Ethernet
*Experience with CM tools Razor, Accurev, Git, JIRA, SVN.
*Familiarity with Visual Studio (i.e., Visual C++).
*Experience developing with C#, familiar with Qt
*Development in an Open architecture, multi-core processing environment.
 
Job Number: 175
Job Location: Orlando, FL
Rate: up to $85 DOE
Per Diem: yes split
Duration: 1 year or more
Input Date: 06/26/2019
Last Updated: 07/12/2019
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Email: tom@cssstaffing.com
Website: www.cssstaffing.com

CAD Designer/Drafter

Description:
 Create detailed designs and fabrication drawings used in the manufacture of various equipment including bill of materials.  Additionally, will create piping flow schematics that are utilized in the construction of piping systems. These detailed technical drawings incorporate the input of engineers, sales and project managers and can specify dimensions, codes, materials, and production methods.    
DUTIES AND RESPONSIBILITES:
  • Develop 3D models and finish drawings from sketches and data provided by Engineers
  • Must be able to visualize, conceptualize and formulate a design in 3D from similar existing designs
  • Ability to learn quickly and work on multiple projects
  • Exercise independent judgment by utilizing the correct design criteria based on knowledge from customer data and project scope
  • Create and assemble documentation packages and produce drawing sets and detailed bill of materials
  • Review customer drawings and other discipline drawings and any existing plan drawings for physical interference and design requirements
  • Provide technical support for project engineers and managers, client inquiries and fabrication requests
  • Effectively communicate with the project engineer, project manager and customer representatives to identify project design requirements
  • Ensure accuracy and completeness of drawings including dimensions, spelling, drafting standards and completeness
  • Must be able to visit job sites and take measurements for equipment design
  • Must have prior experience using Autodesk Inventor software

 

  • Education:  Associate or Bachelor degree in Engineering/CAD Design preferred
  • A minimum of two years CAD experience
  • A minimum of two years 3D modeling experience
  • Possess a strong mechanical aptitude
  • Knowledge of metal plate fabrication and welding preferred
  • Knowledge of integration of laser scan point cloud data into Inventor is a plus
  • Knowledge of iLogic programming a plus
  • Some travel required
  • The ability to work both independently and as part of a team are essential
  • Start date is immediate. 40 Hour work week (Monday- Friday) with some overtime as needed.   

 
 

 
Job Number: 1910099818
Job Location: Smyrna, TN
Duration: 6 months
Input Date: 03/13/2019
Last Updated: 07/19/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Amy Kloeppinger
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002jXrqQAE&URLSource=cjhunter

CNC Machinist

Description:
Chipton-Ross is seeking a Machinist for a contract position in San Diego, CA.

RESPONSIBILITIES:
Plans, operates and performs machine set up of Computer Numerically Control (CNC) horizontal turning lathes and 3-axis precision milling machines. Ability to operate and experience with operating CNC machines manually.
Programs CNC mills and lathes using G and M codes requiring experience with CAM software such as MasterCAM.
Reviews engineering drawings from sketches, graphic illustrations or verbal/written correspondence to plan the fabrication sequence to fabricate parts to specifications in a timely manner.
Determines cutting tools to be used, method of holding and machine speeds and feeds.
Operates metrology equipment and record and document metrology information requiring a working knowledge of computer operating systems and applications such as Windows, Word and Excel.
Maintains detailed records and documentation of machining and fabrication processes
Maintains a safe working environment and works in a safe manner in accordance with established operating procedures and practices.
Performs preventive maintenance and makes machine adjustments as required using hand tools and precision measuring instruments.
Monitors all operations for regulatory and safety compliance
Ability to work extended and/or off shift hours and weekends to meet schedule requirements.
Performs other duties as assigned or required.

REQUIREMENTS:
Must be customer focused and possess: (1) the ability to perform complex set-up and fabrication of machined parts with little or no direction; (2) in-depth knowledge of machining equipment including ability to use judgment and safe practices; (3) ability to read, interpret and explain engineering drawings, sketches and verbal and written instructions; (4) skills to maintain the flow of work within the unit using independent judgment in solving moderately complex problems and recommending solutions; (5) strong interpersonal skills and written communication skills to interface with employees and management; and (6) basic computer skills.
The ability to work both independently and in a team environment is essential as is the ability to work extended hours as required.

EDUCATION:
Typically requires an associate's degree, technical/trade school training or equivalent and four or more years related experience. Additional experience may be substituted for formal education.

MISCELLANEOUS:
1st shift, 5/40 work schedule.
 
Job Number: 175781
Job Location: San Diego, CA
Rate: $DOE
Duration: 6 mo
Input Date: 12/13/2018
Last Updated: 07/20/2019
Firm Name: CHIPTON ROSS
Attention: Brent Sizemore
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bsizemore@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Software Engineer ( Clearfield, Utah ) 9185290

Description:
CNC Software Engineer ( Clearfield, Utah ) 9185290
8 Month Contract

Pay Rate: $50-60/hr maybe more for the right candidate

Job Description:
As a CNC Software Engineer, you will use CAD / CAM tools to generate or edit Machine Programs to support automated machining centers

Requirements & Qualifications:
• MUST HAVE AN ACTIVE SECURITY CLEARANCE TO BE CONSIDERED FOR THIS ROLE with last investigation within the last 4.5 years. Candidate will need to obtain SAP clearance.
• Bachelor’s degree in Engineering and 4 years related work experience
• Working knowledge of NX CAM 5-Axis Milling
• Fanuc 31i experience
• Siemens 840D experience
• Investigate and resolve manufacturing machine problems and instigate corrective actions and follow-up on equipment i.e. CNC mills/lathes
• Prepare solid model or complex geometry
• Perform blue print reading
• Troubleshooting manufacturing processes
• Windows and MS office skills required
Preferred Skills and Experience:
• Experience with NX and Siemens FiberSIM
• Aerospace or manufacturing experience
• Familiarity with composites
• Project Management
 
Job Number: 9185290
Job Location: Clearfield, UT
Rate: 50-60
Per Diem: yes
Overtime: Yes
Duration: 8 Months
Start Date: ASAP
Input Date: 06/05/2019
Last Updated: 06/05/2019
Firm Name: TALENTPRO CONSULTING
Attention: Tim Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

CW Tech Assistant

Description:
PDS Tech, Inc. is seeking a CW Tech Assistant, in MI.
Description:

  • Update and maintain engine control software using matlab/simulink and auto C
  • Update/maintain/and coordinate facility testing efficiency tracking system using excel VBA or other
  • Macro/tool creation for data processing and database improvement 

Requirements:
  • Proficiency in Matlab with Simulink
  • Proficiency in Excel VBA
  • Experience with Auto C
  • Software management experience
  • Process improvement experience
  • C-Code training/experience
  • Database management experience
  • Japanese language skill preferred

 
Job Number: 1910103090
Job Location: Ann Arbor, MI
Duration: 6 months
Input Date: 05/31/2019
Last Updated: 07/19/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Katie Windhurst
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033k0LQAQ&URLSource=cjhunter

Calibration Development Engineer

Description:
PDS TECH INC is currently looking for a Calibration Development Engineer  for our client near Santa Clarita. 

Responsibilities include:
Development primary focus revolves around engine mapping.
Responsibilities include planning, coordinating, executing and reporting on engine calibrations, engine systems or other powertrain systems as required.  
Collect data from testing on dynamometers, test rigs, and any other external test facilities and/or at the race track.  
Subsequent analysis and reporting is required.
Experience with Matlab, Atlas, and AVL software preferred and with Bosch, PI/Cosworth, Motec a plus.
Development may include performance, drivability and/or reliability of engines, engine systems and/or powertrain components per project goals. Must complete writing of test requests, daily progress, test reports and a concise presentation of testing results, analysis, conclusions and suggestions for future development as needed.
Must be able to execute tests first-hand, able to (post-) process raw data and present final results to technical reviews.
Post processing experience with engine controls system such as Simulink is preferred.


Qualifications
 
Requirements include Bachelor's of Science in Mechanical Engineering or equivalent with a solid understanding of internal combustion engines; 3-5 years minimum experience with development and testing of racing engine or chassis components.
 
Previous dynamometer testing of high performance race engines including setup and maintenance; technical report writing. Previous experience with AVL Puma, MTS/Adapt, Pi Toolbox or Wintax software a plus.
 

Must have the ability to plan, organize, schedule and coordinate activities for self-based on an evaluation of work needs and an estimation of timing and create efficient test procedures, specifying the necessary data acquisition and analyze the results to reach an accurate conclusion and present suggestions for follow-up work.
Must have excellent verbal and written communication skills; ability to work in team environment and able to work under minimal supervision; ability to be self-directed, detailed oriented who can effectively work well under pressure in a diverse environment.
Willingness to be hands on in a fast pace environment.

 

 
Job Number: 1910098708
Job Location: Santa Clarita, CA
Per Diem: No
Duration: 12 months
Input Date: 02/25/2019
Last Updated: 07/19/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Hemant Sachdev
Address: 3130 S HARBOR BLVD STE 100
City, State: SANTA ANA, CA 92704
Phone: 714/540-7900
800 Phone: 800/234-8644
Fax Phone: 714/540-8092
Email: cecjcostamesa@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002jTqsQAE&URLSource=cjhunter

Computer Aided Measuring Specialist 3

Description:
Chipton-Ross is seeking 2 Computer Aided Measuring Specialist 3's for an opportunity in Berkeley, MO

RESPONSIBILITIES:
Performs data collection and analysis using a variety of metrology systems and software and provides assistance to others. Creates complex layouts of major assembly tooling. Analyzes production processes and recommends improvements for productivity and quality. Verifies accuracy of tooling deliverable. Interprets complex engineering definition of parts and/or assemblies. Develops and/or recommends manufacturing techniques and associated fabrication devices. Creates machine commands for two and/or three axis machines. Installs and assists with maintenance of software. Assists in troubleshooting and repair of system hardware and software. Assists in the development of measurement plans and performs data collection and analysis. Creates two-dimensional CAD models. Works under general direction.

EDUCATION:
Accredited Bachelor's and typically 6 or more years' related work experience, a Master's degree and typically 4 or more years' related work experience or an equivalent combination of education and experience.

WORK HOURS:
Full-Time/First Shift
7:00 AM - 3:30 PM

 
Job Number: 178628
Job Location: Berkeley, MO
Rate: $DOE
Duration: 6 months
Input Date: 04/11/2019
Last Updated: 07/20/2019
Firm Name: CHIPTON ROSS
Attention: Melody Mullins
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: mmullins@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Computer Systems Architect 4 CA

Description:
Computer Systems Architect 4 (Job Number: 19009600)

Number of Openings: 1

Location(s): United States-California-Manhattan Beach


Shift: 1st Shift

Target Start Date: May 6, 2019

Target End Date: May 1, 2020

Pay: $65.00 - $70.00 per hour

Work schedule: 9/80

Location: Manhattan Beach, CA

Duration of Assignment: Up to 1 year

Position Summary / Responsibilities

We are looking for an individual who will support custom test controllers, special test equipment and

networks in the engineering areas. Strong system administration skills and IT hardware and operating systems are

required to support high availability/dynamic environments such as engineering labs and Integration and test beds in the

Space program areas

Recurring responsibilities:

- Use Enterprise Level hardware and application software and setting up centralized services

- Design technical sound solutions for system requirements including both functional and the security compliance

- Implement security controls and profiles and communicate with information security/computer security office to ensure

compliance.

- Repair and recover from hardware or software failures

- Deliver updates and coordinate with impacted team including conducting reviews and presenting findings.

- Perform continuous monitoring for systems, including documentation for supporting the process.

- Develop patching and remediation activities including developing the end to end process with users and implementing

them.



Qualifications


Basic Qualifications:

9 Years with Bachelors in Science; 7 Years with Masters; 4 Years with PhD.
 
Job Number: JK-1754
Job Location: Manhattan Beach, CA
Rate: 70/hr max
Per Diem: no
Duration: 12 months
Input Date: 06/12/2019
Last Updated: 07/08/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Construction Management & Start Up Manager

Description:
The Construction Manager is responsible for meeting contract requirements and company financial and HSE goals by planning, pricing and managing the site operations, ensuring cost effectiveness, quality and correct timing.  This position has a broad range of decision making authority working in conjunction with the Senior Product Manager.  Decides the timing of company resources at site, including partners.  Sign supervisors’ time-sheets, and sign contractors’ payment claims.  Sign site acceptances with customer.  Enforce HSE on-site, including correction of any unsafe conditions.  Approval of Change Orders on site within agreed frames.
  • Work with subcontractor(s) and the company project team to plan, price and present company supplied installation services.
  • Assuring safe work at site.
  • Liaise with customer as primary contact in construction related matters, in a manner that promotes customer satisfaction.
  • Responsible for on schedule and on budget delivery of supplied installation activities.
  • Assure that contractual liabilities are fulfilled towards customer and by subcontractors at site.
  • Prepare necessary notifications and claims to customer and subcontractors to defend companies commercial rights.
  • Establish site planning and scheduling to provide adequate reports for monitoring progress and to identify any delays.
  • Follow-up subcontractor resources and act to manage shortfalls.
  • Implement catch-up plans as necessary for schedule delays.
  • Manage the company supervision team at site.

Bachelor’s Degree from four-year College or University in Engineering or related degree; plus a minimum of ten years’ experience in a related role; or an equivalent combination of education and experience. 
  • Excellent verbal and written communication skills.
  • Ability to develop strong trusting relationships in order to gain support and achieve results.
  • Self-directed and motivated; able to manage multiple conflicting priorities in a fast-paced environment.
  •  Flexible and available to interact with customers as required.
  • Take initiative to identify and anticipate customer needs and make recommendations for implementation.
  • Has good knowledge of contractual issues.
  • Proven capability and motivation to be in leadership role.
  • Efficiently use scheduling software (Primavera or MS Project).
  • Can maintain a cost effective way to lead a site.
  • Actively implements the use of Site Management Tools.

 
Job Number: 1910100682
Job Location: Appleton, WI
Duration: 12 months
Input Date: 04/08/2019
Last Updated: 07/19/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Tyler Belisle
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033cgCQAQ&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Continuous Improvement Engineer/Analyst

Description:
*This is a full time, 6-9 month contract position, located in York, PA*



We are hiring for a Continuous Improvement Specialist who will be planning, training, working with staff to introduce a culture of continuous improvement. The goal is to improve overall quality, less defects while reducing waste, revisit processes searching for improvement and simplification, improving production times and manufacturing floor flow.



Day to day duties may include maintaining the quality management system including investigating Corrective Action items/events, working on root causes, develop process improvements for sustained process control, ensure maintenance of factory quality, cost and delivery metric goals, implementing corrective actions, statistically analyze metrics that ultimately help lead to better systems and higher quality and cost outcomes.



Required:
*4+ years’ experience in a large firm continuous improvement role including working on investigation teams conducting event change causal analysis
*Strong root cause info gathering and solution resolution; risk mitigation and resolution.
*Have Lean Six Sigma, Green Belt or Black Belt Certification
*Experience leading and closing out Continuous Improvement DMAIC Projects
*SPC and Lean Manufacturing experience
*BS in Engineering



Pluses:
*ASQ CQE certification
*Experience with RCA software (REASON or Taproot)
*Familiar with Minitab metrics and data analysis
 
Job Number: 766
Job Location: York, PA
Rate: $49.20
Per Diem: yes split
Duration: 6-9 months
Input Date: 06/26/2019
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

Cost/Schedule Financial Analyst - Secret Clearance

Description:
PDS Tech, Inc. is seeking a Cost Schedule Financial Analyst with an active DoD Secret Clearance in Hazelwood, MO. 

About the Opportunity:
 
The Cost / Schedule Financial Analyst is responsible for ensuring compliance with government requirements for a large DOD program. This includes applying project management oversight to assigned projects. Provide financial guidance to Program Management teams through the site Core Team that will ensure compliance. Position requires a working knowledge of the cost and schedule management and applicable DCAA/DCMA requirements.
 
What you’ll do:
  • Supports program teams in the development and preparation for EVM validation, preparation of financial packages, compliance/audit support, baseline development and internal integrated baseline reviews, financial and investigative analysis, and real-time information and analysis to PMs, CAMs and Finance Management
  • Closely supports PM team and collaborates with other functions including scheduling, contracts, procurement and central finance
  • Supports/develops policy, process, tools, and training in accordance with ANSI guidelines
  • Provides specialized analysis and develops specialized reports using analytical tools as required to ensure contract compliance / accuracy.
  • Conducts, maintenance and detailed reporting.
  • Interact heavily with internal / external customers regularly for program analysis and performance (actual to plan).
  • Working experience with cost & schedule integration
  • Pursue personal development of skills and knowledge necessary for the effective performance
  • Comfortable with ERP/MRP interfacing reviewing integrated master schedule and master production schedules supporting SIOP.
  • May perform program accounting. Gather and analyze budgetary data. Make inferences about historical financial data and compile the data so that it can be used for forecasting future overhead, direct labor, and material costs, both in total and by program.


Please send resumes to Gus Sanchez, gsanchez@pdstech.com or call 314-264-3135 to discuss. 

 
DOD Secret Clearance is required. 

Minimal Qualifications:



  • Bachelor’s degree in related field
  • Excel/Access Expertise.
  • Prior experience in DoD and/or Aerospace
  • An acitve Secret Security Clearance issued within 5 years is required. 

 
Preferred Qualifications:

  • Previous Cost Account Manager and/or Program Manager experience is preferred supporting Cost Plus, Firm Fix Price and Fix Price Incentive contracts.
  • Experience with budget development, variance analysis, estimates to complete, cost performance reports, and cost schedule status reports in an integrated product team environment is preferred
  • Hands-on experience with cost and schedule software.
  • Requires excellent communication skills and the ability to interface with all levels of the organization.

Please send resumes to Gus Sanchez, gsanchez@pdstech.com or call 314-264-3135 to discuss. 
 
Job Number: 1910097004
Job Location: Hazelwood, MO
Per Diem: Yes
Duration: 6 months
Input Date: 03/18/2019
Last Updated: 07/19/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002r6zwQAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer

Description:
Must be able to obtain a security clearance
Experience using Pro/e, Unigraphics or other 3-D CAD software required
Design of weld joints for steel and aluminum structures
Design and development of ground combat vehicle structures, armor and spall liner.
Knowledge of GD&T required
 
Job Number: 46108
Job Location: MI
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 06/03/2019
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

Design and Analysis Engineer 3

Description:
Chipton-Ross is seeking 2 Design and Analysis Engineer 3 located in Oklahoma City, OK

RESPONSIBILITIES:
Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

EDUCATION:
Accredited Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

WORK HOURS:
Full-Time/First Shift
7:30 AM - 4:00 PM

 
Job Number: 177778
Job Location: OK City, OK
Rate: $DOE
Duration: 6 MONTHS
Input Date: 03/11/2019
Last Updated: 07/20/2019
Firm Name: CHIPTON ROSS
Attention: Brenda Ordaz
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bordaz@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Designer/Drafter / NX MCAD NY

Description:
165064
Request number: 6074
Job title: Designer/Drafter
Number of openings: 2
Position location: East Aurora - NY
Employment type: Contract
OT exempt: No

Shift: 1st Education Requirement: BS/BA
Driving on company time?: No
Minimum Years of Experience: 5
Maximum Hourly Pay Rate: 39
Start Date: 02/04/2019
Tentative End Date: 07/31/2019


Function:
Reporting to the Supervisor of Drafting and under technical direction from Engineering the Mechanical Design Drafter, assumes the responsibility for layouts, models, and mechanical hardware drawings in support of development and product design. Tasks include organization and planning of the number and types of drawings, part selection, parts lists generation, developing complex design layouts and related packaging support documentation. The incumbent is responsible for performing Tolerance Analysis in conjunction with utilization of GD&T methodologies to meet both design, manufacturing, and inspection requirements. The incumbent must also have a working knowledge of configuration management control of product design.

Ideally experience and in-depth knowledge in utilization of Siemens NX Mcad design software is desirable (required). Additionally experience using 3D Mcad software package ie: Solidworks or PTC Creo is a plus. Experiential knowledge of Teamcenter PLM is desirable as well.
Also it is desirable if the candidate has experience in customizing their Mcad environment taking advantage of the Mcad functionality promoting cad efficiency.

Education:
AAS with applicable experience is also acceptable


Request status: Open
 
Job Number: MB-6074
Job Location: East Aurora, NY
Rate: 39/hr max
Per Diem: no
Duration: 6 months
Input Date: 05/30/2019
Last Updated: 06/17/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Desktop Support Technician II

Description:
Job Title: IT - Infrastructure - Desktop Support Technician II          
Work Location: ANCHORAGE TOWER      
Start/End Dates: 5/20/2019 - 11/19/2019            
Assignment Scope: Provides resolution to all desktop support requests. Configures, troubleshoots, isolates, repairs, and resolves all customer desktop issues including desktop/laptop hardware and software, mobile devices, printer, scanners, copiers, hardware peripherals and other desktop related equipment. Troubleshoots and repair desktop computers to ensure they interconnect seamlessly with multiple systems including network drives and all business productivity applications. Communicates directly with customers via phone, e-mail and remote diagnostics to identify, reproduce and resolve customer reported issues. Works independently to troubleshoot all support requests and follow escalation policies. Participates in testing, documentation and implementation of assigned projects. Responsible for tracking hardware inventory per division policies along with running and terminating infrastructure cabling between workstations and communication closets. Typically requires  3-5  years of experience. Intermediate level. Provides technical/functional and/or administrative support. General working knowledge of specific systems, terminology and procedures used within the department. Performs routine tasks. Able to solve problems and make basic decisions.
 
This position will begin working in Anchorage then transition to North Slope and work a North Slope 2 week on two week off schedule as needed.  Will need ability to work both Anchorage and North Slope schedules.
 
JOB DETAILS
•             Provide deskside and remote support for Personal Computing environments at the ConocoPhillips Anchorage, Kuparuk, and Alpine locations.
•             Perform technical support, assembly, installation, repairs, and moving of computers, printers and peripheral hardware assemblies, and maintain hardware inventories for on-site and remote computer support to end users.
•             Handling technically complex desktop support issues.
•             Work independently and partner with multiple IT support team personnel in Alaska, Bartlesville, and Houston to provide seamless support to users.
•             Provides training and consultation to end users. Provides expertise in the selection of standard hardware and software solutions to maximize efficiency and meet customer needs.
•             Certified warranty & non- warranty repair of Dell computers and Hewlett Packard printers.
•             Managing small to medium local projects for and participate in IT initiatives.
REQUIRED
• A+ Certification (If not, must be able to obtain within 3 months of starting position)
• High School Diploma/GED
• Legally authorized to work in the United States on a regular full - time basis without restrictions
• Three years of direct experience in troubleshooting Microsoft Windows Operating Systems
• Able to lift/move equipment up to 30lbs
• Able to work a 2 week on / 2 week off rotational schedule in Kuparuk or Alpine on the North Slope, Alaska
• Completion of North Slope Unescorted Training course (NSTC Certification) http://nstc.apicc.org/
• Valid Drivers License
• Knowledge of a broad range of technologies including: WAN/LAN, COE Desktop, Core Business Applications and Desktop Products
• Ability to give presentations to small or medium size groups
• Excellent verbal and written communication skills with direct customer interaction
• Ability to work well with local and global teams
• Willingness to continually learn
• Ability to champion change
PREFERRED
• Bachelor's degree in MIS or Computer Science
 
Job Number: 1910101883
Job Location: Anchorage, Ak
Duration: 12 months
Input Date: 05/02/2019
Last Updated: 07/19/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Luke Polansky
Address: PACIFIC OFFICE CENTER
310 K ST STE 200

City, State: ANCHORAGE, AK 99501
Phone: 907/562-1633
Fax Phone: 855/685-1397
Email: cecjanchorage@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033gFiQAI&URLSource=cjhunter

E-Drive Integration Engineer

Description:
PDS Tech, Inc. is seeking an E-Drive Integration Engineer in Auburn Hills, MI.

Summary:

  • E-Motor hubs packaging verification, and release for prototype and production to specific customer applications.
  • Verifies torque control, power management, and thermal management of the E-Motor hubs and e-drive system.
  • Testing and validation of motor control and motor sensor subsystem requirements.
  • Diagnoses and corrects deficiencies in designs and prototypes.
  • Understands test machine requirements and instrumentation.
  • Support for motor control and motor sensing subsystem analysis, modeling, and design.
  • Design and optimizes the e-drive system including packaging and development of CVT in cooperation with the supplier.
  • Dynamic lean design and optimization
  • Designs and optimizes simultaneous system performance goals through requirements flow down.
  • Effectively integrates all aspects of a design using multi-disciplinary engineering.
  • Understands and creates system and subsystem specifications.
  • Assists in maintaining cost controls.
  • Familiar with preliminary analysis and simulation to detect stresses conditions on subsystems and on component design level.
  • Experience with design, development, validation and integration.
  • Basic skills in analysis and simulation parameters to set up through the CAD models. Familiar with the mains manufacturing processes: sand casting, die casting, injection plastic components, sheet metal forming, gravity casting.

Qualifications / Education:
  • BS in Electrical Engineering or Mechanical Engineering required with emphasis in electric machines and drives, magnetic sensing subsystems, embedded systems, and/or electromagnetics preferred.
  • Five years’ experience working with e-drive systems.
  • Strong computer skills and knowledge of design and simulation tools (e.g. Catia V5, NX,) is required.
  • Able to generate 3D math models and 2D prints for complex parts.
  • General competency in all core fields (electronics, electromagnetics, computer hardware and software) is preferred.
  • Excellent problem-solving techniques.
  • Knowledge of system synthesis, analysis and verification techniques.
  • Good organization and documentation abilities.
  • Must be able to view a computer screen or monitor for extended periods of time.
  • Must be able to sit or stand for extended periods of time.

 
Job Number: 1910102061
Job Location: Auburn Hills, MI
Duration: 12 months
Input Date: 05/07/2019
Last Updated: 07/19/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Katie Windhurst
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033gjZQAQ&URLSource=cjhunter

ECS System Engineer - UM

Description:
PDS Tech Inc is seeking a ECS System Engineer - UM in Wichita, KS

Job Responsibilities:
 JOB RESPONSIBILITIES:
• Authoring System Safety Reports including Aircraft and System Functional Hazard Assessments, Common Mode Analysis, and Zonal Safety Analysis.
• Assisting authors with Preliminary System Safety Assessments, and System Safety Assessments. This includes supporting FMEA, fault tree analysis, qualitative and quantitative analysis, etc.
• Provide support for ODA Unit Member making findings of compliance for the FAA in the above areas or make finding of compliance as an ODA Unit Member.
• Assist systems design and engineering teams in ensuring all aspects of 23/25.1309 compliance are addressed including reviewing certification plans and supporting reports.

EDUCATION / EXPERIENCE:
• B.S. or advanced degree in Aeronautical, Mechanical, or Electrical Engineering, Physics, Math, Statistics or related technical degree required
• Minimum 7 years of experience in General Aviation or Business Aircraft development programs



 
 



 
JOB QUALIFICATIONS:
• Experience in System Safety/Reliability and/or aircraft mechanical, avionics or electrical systems design and/or certification is desired.
• Experience with domestic and foreign aircraft certification process is desired.
• Knowledge of the safety assessment processes outlined in AC 23.1309-1D SAE ARP 4761/4754A and the draft version of AC 25.1309 is desired.
• A working knowledge of DO-178 & DO-254 is desired.
• Experience in system assessment using modeling tools such as Failure Modes and Effect Analysis (FMEA), (Failure Modes and Effect Criticality Analysis (FMECA), Reliability Block Diagram (RBD), and Fault Trees Analysis (FTA) is desired.
• Ability to use Reliability Workbench (Fault Tree+) is desired.
• Experience with fault tree modeling tools such as Fault Tree+, Relex, and CAFTA is desired.
• Experience with Microsoft Office software application and working environment is required.
• The candidate must be able to work in a team environment and be able to clearly communicate thoughts and ideas with peers, management, and certification authorities

 
Job Number: 1910097709
Job Location: Wichita, KS
Duration: 12 months
Input Date: 01/24/2019
Last Updated: 07/19/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Marjorie Santiago-Marquez
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002r9TgQAI&URLSource=cjhunter

Ejection Seat Test Engineer

Description:
PDS Tech is seeking an Ejection Seat Test Engineer in CO Springs, CO.
 
We are looking for a highly motivated individual to join our expanding Ejection Seat Design team located on the front range of the Rocky Mountains in beautiful Colorado.  The Ejection Seat Design team is a dream position for an Engineer wanting work with very challenging requirements, state of the art technologies, advanced materials, cartridges, rockets, computer-controlled devices, subsonic & supersonic aerodynamics, parachutes, aircrew equipment including advanced helmet mounted displays, and the appreciation for saving an aircrew life every few months.
 
The Ejection Seat Test Engineer will support the analysis and testing of ACES ejection seat components and subsystems.  The position will provide engineering deliverables through qualification testing and the initial production implementation.  The individual will propose new technology, create innovative design solutions, support design reviews, work directly with customers, drawing release/review and support testing of the product.




 
Responsibilities:
  • Test Leader for small & medium (<$500K/yr) projects or potentially be the Lead Test Engineer for a subsystem design effort for large ejection seat program project.
  • Successfully executes on test tasks required to develop and qualify aircraft ejection seats.
  • Utilize NX 8.5 CAD and Team Center Product Lifecycle Management (PLM) software to evaluate 3D design models and to facilitate the drafting department in producing drawings
  • Review work submitted from the Global Engineering Center-India (GEC-I) and coordinate with appropriate Engineering Resources.
  • Work as part of a cohesive engineering team and with the Integrated Product Development Team (IPDT) to test various aircraft seating products.
  • Work as part of a cohesive test team testing ejection seats with state-of-the-art anthropometric manikins at ejection velocities from zero airspeed to beyond the speed of sound (800+ MPH groundspeed)
  • Review requirements and evaluate new product test and functionality in support of meeting customer requirements and successful qualification efforts.
  • Facilitate and execute necessary testing to ensure product safety.
  • Interact with Program Management to ensure customer satisfaction.
  • Assist Engineering Management to coordinate the timely delivery of product test and customer proposal requests.
  • Conceptualize and prepare preliminary and final detail test documentation for systems, components, and assemblies.
  • May occasionally design test fixtures, tooling, and aircraft fuselage mounts and undercarriages to mount to our test facility track.
  • Adhere to all rules and codes of conduct.
  • Perform other duties as required.

Skills Required:

  • Ability to visualize, test and evaluate cutting edge mechanical structure, mechanisms, cartridge actuated devices, parachutes, head/neck protection devices, arm restraint devices, leg restraint devices, torso restraint devices, survival equipment, etc. to enable safe ejection that meets the very stringent department of defense expectations for ejection seat performance.
  • Detail oriented and thorough in all assigned tasks
  • Innovative and driven to complete all assigned tasks to the project schedule.
  • Strong customer skills and customer focus (both internal and external customers)
  • Strong analytical skills including strong knowledge of physics, dynamics, and statics.
  • Ability to work independently or as part of an integrated product team.
  • Ability to multi-task with strong organizational skills and prioritize both daily issues and long-term projects.
  • 100% dedicated to following all safety procedures and precautions.
  • Excellent interpersonal skills.
  • Excellent written and verbal communication skills
  • Ability to present test solutions
  • Excellent computer skills, including skill in Microsoft Office applications and the ability to independently learn new software.

Education:

  • Bachelors.

 
Job Number: 1910101206
Job Location: CO Springs, CO
Duration: 12 months
Input Date: 04/17/2019
Last Updated: 07/19/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033e6CQAQ&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Designer

Description:
Seeking a talented Electrical Designer with experience in design of electrical systems CAD software, preferably with heavy industrial equipment and/or heavy industrial facilities. This person will work on multiple projects with other Designers and Engineers to support their client’s projects and schedules.

Responsibilities include but are not limited to:

Ability to work in the field
Ability to perform field surveying of existing conditions

Ability to communicate and work alongside a multidisciplinary team of designers and engineers

Prepare design documents using AutoCAD and Bentley MicroStation products

Prepare electrical construction drawings for various maintenance and capital projects in heavy industrial processing facilities.

Substation design

Interface with Project Engineering
 
Job Number: 23627
Job Location: Philadelphia, PA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: Temp to Direct
Start Date: ASAP
Input Date: 06/03/2019
Firm Name: JOHN GALT STAFFING
Attention: Al Dubosky
Address: 77 S BEDFORD ST
City, State: BURLINGTON, MA 01803
Phone: 781/273-9995
800 Phone: 888/946-4754
Fax Phone: 781/273-9099
Website: www.j-galt.com

Certified Interconnect Designer (CID) - Electrical Designer / CAD Drafter

Description:
The Electrical Designer/CAD Drafter position will have emphasis on Aerospace Electronics Circuits.

Activities will include:
• conceptual layout,
• detailed design, and
• engineering documentation of complex multi-layer analog, digital, mixed signal, RF, high speed, and high-power PCB layout designs.
• Interfacing with other engineering groups to insure design requirements are fulfilled.

The selected candidate will work as a member of the Electronic Systems Center, and will be part of design, development and momentum support on aerospace electronic solutions.

The position may involve direct interface with customers (internal and external) and suppliers in support of developing an understanding of the electrical design constraints. The position will work with cross functional teams to resolve issues. In addition, some travel to customer and supplier facilities may be required.

Responsibilities may include:
• Interpreting electrical design requirements and creating original board layouts, detailed drawings, schematics, and illustrations
• Providing for compliance with items such as specifications, tolerances and safety factors when performing highly specialized electrical designs
• Performing specialized electrical design computations and analysis
• Preparing diagrams and PCB design schedule estimations.
• Coordinating electrical design work with Electrical Design Engineers
• Collecting background information and helping write specifications and electrical design practices
• New product development from concept through production
• Processing documents through document change system

Required Qualifications:
• IPC Certified Interconnect Designer (CID), as a minimum.
• Minimum 5 years’ experience with Cadence v16.6 – v17.2 Concept HDL schematic capture and Allegro PCB layout tool sets.
• Thorough knowledge of IPC standards regarding PCB design, fabrication and assembly.
• Thorough knowledge of Cadence Library manager.
• Thorough knowledge of implementing design constraints and the use of constraints within Cadence Concept HDL schematic capture and Allegro PCB layout tool set.
• Full understanding of the data structure of a typical database (design) within Cadence Concept HDL schematic capture and Allegro PCB layout tool set.
• Experienced in implementing manufacturer’s data as well as PCB and CCA suppliers DFM recommended suggestions.
• Full understanding of PCB, FAB and CCA manufacturing processes.
• Applicant should be highly motivated, with demonstrated leadership and communication skills and pays close attention to detail.
• Must be a US Citizen or US person.

Preferred Qualifications:
• IPC Advanced Certified Interconnect Designer (CID+).
• Experience with Siemens Teamcenter PLM Software.
• Knowledge of GD&T ASME Y14.5.
• A background working on avionics design related experience
• Knowledge of and the use of Hierarchal schematic blocks
• Experience with Mentor Graphics DxDesigner-Expedition Enterprise flow
• Experience with Microsoft Visio
 
Job Number: 1910100867
Job Location: Phoenix, AZ
Overtime: possible
Duration: 6 months
Start Date: ASAP
Input Date: 07/10/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: sspolzino@pdstech.com
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Responsible for evaluating test requirements for RF communication units such as radios, RES boards, baseband boards, power supplies and power amplifiers and specify test equipment, develop associated electrical interfaces such as circuit boards and cabling to implement a hardware test solution.
Work with test software group to coordinate test hardware to meet test requirements.
Work with mechanical designers to implement test fixtures as part of the hardware test solution.
Develop test solution concepts and prototypes of initial concepts.
Document test hardware and software using computer-based tools such as DxDesigner and Visio
Implement standard Configuration Management techniques in design architecture
Direct technicians in the completion of test system fabrication and troubleshoot
Typical day is Engineering Design Reviews
Education/Experience
Bachelors
MUST HAVE Experience in designing cable circuit board, Electronic Test equipment especially RF along with multimeter oscilloscopes switch matrix
 
Job Number: 49680
Job Location: Rochester, NY
Duration: 12 months
Start Date: ASAP
Input Date: 06/12/2019
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Rick Nussbaum
Address: 1857 WELLS RD STE 214
City, State: ORANGE PARK, FL 32073
Phone: 904/562-3221
800 Phone: 866/277-3343
Fax Phone: 904/713-2000
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Electrical Engineer

Location: St. Louis, MO

9 month contract

We are seeking electrical engineers for design work on a major military program. Three phases, phase 1 translation cleanup to Mentor Graphics, phase 2 new a/c system wiring diagram design and phase 3 wire routing installation design.

Degree Requirements: BS degree in Electrical Engineering or significant industry experience. Years of experience can be added for post-BS education.

Skill Requirements:

Aerospace system electrical engineering experience
Wire diagram design experience
Wire design experience
Wire installation design experience
Software/tool Requirements:

CATIA V5
Enovia (or some PLM system)
Mentor Graphics Capital
NX
Microsoft Office including Visio
Rhapsody







____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 57048
Job Location: St. Louis, MO
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 9+ months
Start Date: ASAP
Input Date: 07/05/2019
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Capable of getting a secret clearance desired

Extensive vehicle and lab testing required

Support hardware and software integration in a lab environment to include the use of various test equipment to include dynamic analyzers, oscilloscopes, logic analyzers, Ethernet, RS-422, etc.

Perform vehicle level testing utilizing the same type of equipment.

Analyze subsystem requirements and develop logic for flowcharts, state charts, state diagrams, and fire control algorithms for design documents.
 
Job Number: 46816
Job Location: MI
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 06/06/2019
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

Electrical Engineer

Description:

PDS Tech is seeking an Electrical Engineer in Florence SC.



 



The ideal candidate will perform research, development, design, and testing of electrical components, PC Board Layout, Electronics Packaging equipment, facilities, systems, products and networks for commercial, industrial and governmental purposes.



 



This position will provide product support for a variety of elevator components and electrical systems.  The position will play a crucial role in maintaining product integrity, evaluating opportunities, and integrating new component designs into existing systems, while working to meet agreed upon cost and schedule commitments. 



 



The candidate should be able to interpret schematics, wiring diagrams, mechanical assembly drawings, and sometimes building plans in order to analyze complex problems and identify root cause issues and develop innovative solutions.  Ability to work across disciplines with mechanical engineers, software engineers, manufacturing personnel, and field personnel is required.


Experience/Qualifications:
  • MA/MS degree with 1 to 2+ years’ experience BA/BS degree with 2 to 5+ years’ experience.

Preferred Skills:

  • Sound Electrical Engineering background including wiring diagrams, systems analysis, motor and control applications, and control logic.
  • Control System Logic and Power Electronics.
  • Ability to work with suppliers/3rd parties.
  • Experience with test and measurement equipment.
  • Understanding of mechanical and software functions. 
  • ECAD tools (Cadence, E3, or others). 
  • Strong communications skills and leadership ability. 
  • MS Office applications (Word, Excel, Power Point, etc.).

 
Job Number: 1910102093
Job Location: Florence, SC
Duration: 7 months
Input Date: 05/15/2019
Last Updated: 07/19/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033gmOQAQ&URLSource=cjhunter

Electrical Engineer

Description:
PDS Tech, Inc. is seeking an Electrical Engineer in Auburn Hills, MI.

Summary:

  • Develop, validate and integrate the functionality of e-motor hub system, dynamic lean system, integrated display unit, and sensors.
  • In charge to integrate the software platform for infotainment, vehicle performance monitoring, torque and power distribution
  • Development of the powertrain sensors and controllers
  • Development of the strategy for the dynamic lean system; step by step electrical motor to balance the vehicle under specific conditions and loads
  • Lighting/signals subsystem development

Qualifications/Education:
  • Bachelor’s degree in Electrical or Mechanical Engineering.
  • 5+ years’ experience and capability to work with various data acquisition tools.
  • 5+ years’ experience with Matlab or equivalent tools.
  • 5+ years’ experience with sensor development.
  • 5+ years’ experience with controls.
  • Strong mechanical understanding or Mechanical engineering background with strong electrical understanding is preferred.
  • Must be able to manage multiple concurrent assignments with proper prioritization.
  • Excellent interpersonal and collaborative skills are necessary to be successful in this position.
  • Proactive approach to evaluate efficient and innovative solutions even to quickly troubleshoot urgent situations.

 
Job Number: 1910102060
Job Location: Auburn Hills, MI
Duration: 12 months
Input Date: 05/09/2019
Last Updated: 07/19/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Katie Windhurst
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033gjUQAQ&URLSource=cjhunter

Electrical Engineer

Description:
PDS Tech Inc is seeking an Electrical Engineer, in Wichita, KS    
  • Job Responsibilities: 

    • Responsible for integration of supplier avionics equipment into Cessna Citation aircraft. 

    • Responsible for completing complex development, design, testing and certification assignments for new design or modifications. 

    • Develops creative, scientific alternatives during course of job assignments to reach desired outcome. 

    • Designs aircraft interface wiring, and prepares engineering drawings, reports and other documents. 

    • Maintain a high degree of proficiency in computer applications to accomplish tasks. 

    • Coordinates with direct and indirect customers and suppliers to determine system requirements. 

    • Consults other engineering and manufacturing personnel to coordinate design and resolve technical issues. 

    • Consults with supplier to discuss and remedy issues in a timely and efficient manner. 

    • Provides guidance to lower grade engineers in the solution of complex design problems. 

    • Reviews and evaluates supplier proposals for potential utilization on future models. 

    • Performs above work utilizing frequent application of in-depth engineering principles. 

    • Assures supervision awareness of program status, problems and successes. 

    • Provides periodic design reviews and update presentations to management of engineering and other company organizations. 

     
  • Education/Experience: 

    • B.S. or advanced degree in Electrical Engineering, Computer Engineering, Electrical/Electronic Engineering Technology, or related technical degree required 

    • Experience with avionics and electrical system design to the requirements of CFR 14 Parts 23 & 25 desired 

    • Minimum 7 years of experience in General Aviation or Business Aircraft development programs 

Qualifications: 

• Working knowledge of generic CAD wiring design tool processes. Experience in CATIA/CCD, Mentor Graphics, and/or IAI HarnesSys is preferred 
* Experience with DO-178
* Experience with LDRA


• Ability to read and produce wiring drawings using standard industry practices 

• Experience with electronic test equipment 

• Design knowledge of electrical bonding criteria, thermal cooling requirements for electronic equipment, EMI shielding, and High Intensity Radiated Fields (HIRF)/Indirect Effects of Lightning (IEL) installation criteria preferred 

• Skills in Microsoft Office suite software 

• C/C++ and assembly programming experience preferred 

• Visual Programming language preferred 

• Excellent written and verbal communication skills 

• Strong analytical and problem solving skills
 
Job Number: 1910101471
Job Location: Wichita, KS
Duration: 12 months
Input Date: 04/29/2019
Last Updated: 07/19/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Marjorie Santiago-Marquez
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033eqEQAQ&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer (Elevator Industry)

Description:
The ideal candidate will perform research, development, design, and testing of electrical components, PC Board Layout, Electronics Packaging equipment, facilities, systems, products and networks for commercial, industrial and governmental purposes.

This position will provide product support for a variety of elevator components and electrical systems. The position will play a crucial role in maintaining product integrity, evaluating opportunities, and integrating new component designs into existing systems, while working to meet agreed upon cost and schedule commitments.

The candidate should be able to interpret schematics, wiring diagrams, mechanical assembly drawings, and sometimes building plans in order to analyze complex problems and identify root cause issues and develop innovative solutions. Ability to work across disciplines with mechanical engineers, software engineers, manufacturing personnel, and field personnel is required.

Experience/Qualifications
MA/MS degree with 1 to 2+ years’ experience or a BA/BS degree with 2 to 5+ years’ experience

Preferred Skills:
• Sound Electrical Engineering background including wiring diagrams, systems analysis, motor and control applications, and control logic
• Control System Logic and Power Electronics
• Ability to work with suppliers/3rd parties
• Experience with test and measurement equipment
• Understanding of mechanical and software functions
• ECAD tools (Cadence, E3, or others.)
• Strong communications skills and leadership ability
• MS Office applications (Word, Excel, Power Point, etc.)
 
Job Number: 1910102093
Job Location: Florence, SC
Per Diem: split
Overtime: possible
Duration: 7 months
Start Date: ASAP
Input Date: 06/27/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer II

Description:
**Position requires U.S. Citizenship.**

Job Responsibilities:
Working knowledge of system design software (Labview, TestStand, C++, etc).
Prior schematic capture/PCB generation experience in CAD software.
Exposure to various test equipment architectures (VXI, PXI, Rack and Stack, etc).
Knowledge of communication protocols (Modbus, Ethernet, CAN, Profibus, etc).
Electronic circuit knowledge: digital, analog, power and high voltage.
Experience with electrical and pneumatic systems.
Ability to review legacy equipment to troubleshoot issues in design or performance.
Hands on experience with hand tools and lab instruments (multimeter, oscilloscope).
 
Job Number: 34744
Job Location: Knightdale, NC
Duration: 12 mos
Input Date: 06/06/2019
Last Updated: 06/19/2019
Firm Name: TAD PGS INC
Attention: Kim Silcott
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 714/622-3967
800 Phone: 800/261-3779
Fax Phone: 714/897-8455
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer III

Description:
**Position requires U.S. Citizenship.**

The Systems Engineer will be responsible for working on the concept, requirements, design, development and testing of an aircraft electrical power system.

In the role of Systems Engineer, you will utilize your power electronics, power generation and distribution, controls, software, and simulation expertise to work with the customer in defining, allocating, validating, tracing, verifying, and documenting customer requirements. You will help in certifying electric power systems on commercial airplanes.

Job Responsibilities:
Design Power Systems Architectures in co-operation with aircraft manufacturers.
Utilize your power electronics, power generation and distribution, controls, software, and simulation expertise to work with the customer in defining requirements.
Derive system interfaces.
Work with subsystem leads in developing, allocating, validating, tracing, verifying, and documenting requirements.
Perform system analysis, safety analysis, modeling, and simulation.
Develop the systems test environment.
Development system test plans and procedures and get their approval with the customer.
Work on developing and releasing test reports to customers.
Define Safety of Flight and Qualification tests and ensure that critical safety aspects of electric system are tested and verified to enable flight test program.
Develop and execute objectives for yourself and others; can affect short-term and some long-term business goals.
Maintain scope baseline.
Work with both real-time and non-real-time systems, such as hardware-in-the-loop and computer-in-the-loop simulations and be able to distribute these simulations.
Document the results of analyses and studies in technical reports.
Develop significant Customer interaction and relationship acting as reliable focal point for assigned LRU.
Assure proper documentation of technical data generated for the assigned tasks consistent with engineering policies and procedures.
Support technical and program reviews.
Job Qualifications:
Degree in Mechanical/Aeronautical/ Electrical Aerospace Engineering.
Experience in requirements development, verification and validation.
Experience in system engineering and project management/planning.
Knowledge of aircraft power distribution and generation
Clear thinking and diligent approach.
Strong interpersonal and communication skills.
Desired Characteristics:
Knowledge of electrical power systems technical requirements, certification requirements.
Experience/ knowledge of the development lifecycle phases.
Strong technical aptitude, including applicable engineering tools and systems, i.e. DOORs.
Good written and verbal communication skills.
Proven ability to contribute in a team environment.
Experience of RTCA DO-178B/C, SAE ARP4754A or similar rigorous development standard.
System mindset and problem solver .
 
Job Number: 35475
Job Location: Ayer, MA
Input Date: 06/19/2019
Firm Name: TAD PGS INC
Attention: Kim Silcott
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 714/622-3967
800 Phone: 800/261-3779
Fax Phone: 714/897-8455
Website: www.tadpgs.com

Electrical Engineering Test Tech

Description:


PRIMARY FUNCTION:
The Electrical Engineering Test Technician will perform configuration and acceptance testing of complex electronic systems/assemblies, by applying principles and theories of electronics, electrical circuitry, engineering mathematics, electronic and electrical testing.
This position follows a 4x10 compressed workweek schedule.
JOB DUTIES:
 
  • Test product, using standard test equipment and procedures, and analyze results to evaluate performance and determine need for adjustment.
  • Assemble, test, and maintain circuitry or electronic components according to engineering instructions, technical manuals, and knowledge of electronics, using hand and power tools.
  • Read schematic drawings and engineering instructions for assembling electronics units, applying knowledge of electronic theory and components.
  • Adjust and replace defective or improperly functioning circuitry and electronics components, using hand tools and soldering iron.
  • Maintain documentation of testing and equipment operation.



 



 





 



BASIC QUALIFICATIONS:
 
  • Ability to read and interpret schematics, assembly drawings, procedure manuals, parts lists and wire data lists.
  • Knowledge of analog and digital symbol identification
  • Knowledge of test practices and procedures.
  • Personal computer skills required to configure and load software
  • Ability to operate test equipment such as: ohmmeters, digital voltmeters, generators, counters, oscilloscopes, and personal computers.
  • LINUX operating system experience able to run detailed procedures to configure Firmware and load Software, Test and Troubleshoot, RF Experience, and run Acceptance Test Procedures.  


EDUCATION AND EXPERIENCE:
 
  • Associate's degree (A. A.) or equivalent in Electronic Technology or related field of study preferred.  
  • 2 years related experience and/or training; or equivalent combination of education and experience.


QUALIFIED APPLICANTS MUST MEET FOLLOWING REQUIREMENTS:
 
  • Valid State Driver’s License
  • Must be DoD Clearance Eligible


PHYSICAL ACTIVITY:
Climbing, Balancing, Stooping, Kneeling, Crouching, Crawling, Reaching, Standing, Walking, Pushing, Pulling, Lifting, Fingering, Grasping, Feeling, Hearing, Talking, and Repetitive Motions




 


 
Job Number: 1910099812
Job Location: Hunt Valley, MD
Per Diem: Yes
Duration: 12 months
Input Date: 03/18/2019
Last Updated: 07/19/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chris O\'Connor
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002jXr7QAE&URLSource=cjhunter

Electrical Test Engineer - Secret Clearance

Description:
Major functions:

Under limited supervision and with moderate latitude in assignment, may perform some, or all, of the following:

• Develop and implement test plans, test cases, and test software based on project requirements

• Create pass / fail evaluation metrics

• Perform test integration and post-test data analysis

• Perform regression and qualification testing generating test documentation and presenting results

• Create and use test harnesses for embedded systems



Requirements:

Active Secret clearance required walking in the door



Education/Experience/Licenses etc.:

Required Education/Experience: Bachelors Degree in Engineering, Math, or Physics.

• Seven or more years experience with embedded system testing, integration, and validation techniques

• Seven or more years experience documenting test results for corrective actions, reporting, and audits

• Five or more years experience defining system pass / fail metrics and with performing test data analysis

• Familiarity with RF, Navigation, and GPS

• Excellent written and verbal communication skills required

• Ability and motivation to quickly learn the program scope and fundamentals required to support a fast moving project

• Expertise testing in an embedded software development environment with broad lab experience integrating with target hardware.

• Ability to successfully interact with other Engineering disciplines including design, systems, and software engineering functions.

• Capable of working in a team environment with the ability to work independently at times with minimal supervision

• Demonstrated self-starter

• Some weekends and evenings will be required

• Occasional travel may be required (<5%)

Special Requirements: Must have an Active Secret Security Clearance. US citizenship required for this position.




Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
 
Job Number: 19-21565
Job Location: Anaheim, CA
Rate: 80.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2019-12-31 00:00:00.0
Start Date: 2019-06-17 00:00:00.0
Input Date: 05/28/2019
Last Updated: 07/20/2019
Firm Name: NESCO RESOURCE
Attention: Kevin Lord
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Email: cjhunter.nesco@jobdivaemail.com
Website: www.nescoresource.com

Electrical UM (23&25)

Description:
PDS Tech, Inc. is seeking Electrical in Wichita, KS
This role will gain valuable engineering experience in the area of design requirements including capture, design, validation, troubleshooting, and certification of aircraft avionic and electrical systems. Working with managers and key players in Engineering, Candidates will assist in the development and evaluation of crucial systems on  Aviation Products. Prepare engineering drawings for avionics and electrical system interface wiring using computer based drafting tools (CATIA/CCD and/or IAI HarnesSys). Utilize electronic test equipment to verify avionics and electrical systems meet design requirements, and/or for system troubleshooting in the lab and on aircraft. Prepare engineering trade studies, functional test procedures, certification plans, ground and flight test plans, certification reports, and other engineering documents. Write technical descriptions of subject matter pertinent to design or test requirements. Includes descriptions of supplier parts, test or rigging specifications, etc. Assist with the evaluation and analysis of avionics and electrical system design for completion of function hazard assessments and system safety assessments.

Job Responsibilities:
• DER/UM-related duties missing; ensuring that the proposed design is certifiable, coordinating with the FAA, resolution of certification issues, determination of the certification basis, writing the certification plan, witnessing certification testing, find compliance.
• Responsible for successful integration and certification of vendor equipment into Cessna Citation aircraft. Assists in preparation of reports, engineering drawings, reports and other documents. Coordinates with direct and indirect customers and suppliers to determine system requirements and resolve problems.
• Responsible for completing complex development, design, testing and certification assignments for new design or modifications. Develops creative, scientific alternatives during course of job assignments to reach desired outcome.
• Conducts research, calculations, estimates and drafting of projects to conform with established specifications such as capacities, styling, performance and determine status of work in progress. Performs above work utilizing frequent application of in-depth engineering principles.
• Maintain a high degree of proficiency in computer applications to accomplish tasks.
• Consults and coordinates with other engineering and manufacturing personnel to coordinate design function and resolve technical problems. Consults with supplier to discuss and remedy issues in a timelier and efficient manner.
• Requests and coordinates work performed by Engineering support groups, Experimental, Manufacturing and Supply Chain Management for the project. Instructs suppliers as to materials, equipment and hardware for utilization on aircraft in accordance with approved specifications.
• Maintains contact with Product Support Engineering and production departments to resolve engineering problems impeding production and to assist in the incorporation of new design concepts and changes.
• Monitors and conducts analyses on first article fabrication and operation to assure adequacy of design.
• Reviews and evaluates supplier proposals for potential utilization on future models.
• Provides guidance to engineers and report writers in the solution of specific, complex design problems, which must be resolved during development and testing.
• Assures supervision awareness of program status, problems and successes. Provides periodic design reviews and update presentations to management of engineering and other company organizations and tools.

EDUCATION:
• B.S. or advanced degree in Aeronautical, Mechanical, or Electrical Engineering, Physics, Math, Statistics or related technical degree required
• Minimum 7 years of experience in General Aviation or Business Aircraft development programs

JOB QUALIFICATIONS:
• Electrical DER qualifications (FAR 23 or 25).
• Experience with domestic and foreign business and/or general aviation aircraft certification process is required
• Some experience in system assessment using modeling tools such as Failure Modes and Effect Analysis (FMEA), (Failure Modes and Effect Criticality Analysis (FMECA), Reliability Block Diagram (RBD), and Fault Trees Analysis (FTA) is desired.
• Experience with Microsoft Office software application and working environment is required.
• The candidate must be able to work in a team environment and be able to clearly communicate thoughts and ideas with peers, management, and certification authorities.
 
 
Job Number: 1910098626
Job Location: Wichita, KS
Duration: 12 months
Input Date: 02/20/2019
Last Updated: 07/19/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Marjorie Santiago-Marquez
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002jTbWQAU&URLSource=cjhunter

Electrical/Avionic Design Engineers

Description:
PDS Tech Inc is seeking Avionics/Electrical Designers in Wichita, KS

JOB RESPONSIBILITIES:

  • Job Responsibilities:
    • Responsible for integration of supplier avionics equipment into Cessna Citation aircraft.
    • Responsible for completing complex development, design, testing and certification assignments for new design or modifications.
    • Develops creative, scientific alternatives during course of job assignments to reach desired outcome.
    • Designs aircraft interface wiring, and prepares engineering drawings, reports and other documents.
    • Maintain a high degree of proficiency in computer applications to accomplish tasks.
    • Coordinates with direct and indirect customers and suppliers to determine system requirements.
    • Consults other engineering and manufacturing personnel to coordinate design and resolve technical issues.
    • Consults with supplier to discuss and remedy issues in a timely and efficient manner.
    • Provides guidance to lower grade engineers in the solution of complex design problems.
    • Reviews and evaluates supplier proposals for potential utilization on future models.
    • Performs above work utilizing frequent application of in-depth engineering principles.
    • Assures supervision awareness of program status, problems and successes.
    • Provides periodic design reviews and update presentations to management of engineering and other company organizations.


 
 



 
Education/Experience:
• B.S. or advanced degree in Electrical Engineering, Computer Engineering, Electrical/Electronic Engineering Technology, or related technical degree required
• Experience with avionics and electrical system design to the requirements of CFR 14 Parts 23 & 25 desired
• Minimum 7 years of experience in General Aviation or Business Aircraft development programs

Qualifications:
• Working knowledge of generic CAD wiring design tool processes. Experience in CATIA/CCD, Mentor Graphics, and/or IAI HarnesSys is preferred
• Ability to read and produce wiring drawings using standard industry practices
• Experience with electronic test equipment
• Design knowledge of electrical bonding criteria, thermal cooling requirements for electronic equipment, EMI shielding, and High Intensity Radiated Fields (HIRF)/Indirect Effects of Lightning (IEL) installation criteria preferred
• Skills in Microsoft Office suite software
• C/C++ and assembly programming experience preferred
• Visual Programming language preferred
• Excellent written and verbal communication skills
• Strong analytical and problem solving skills
 
Job Number: 1910097705
Job Location: Wichita, KS
Duration: 6 months
Input Date: 02/27/2019
Last Updated: 07/19/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Marjorie Santiago-Marquez
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002r9TMQAY&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic System Design & Analysis

Description:
Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs. This Diagnostic Modeler position requires an engineer capable of performing analysis of reliability, maintainability, and system health of aircraft subsystems. Ability to analyze complex electrical and mechanical subsystems is essential. You will evaluate failure mode effects and criticality analysis (FMECA) data from subsystem suppliers to create fault trees and model the fault behavior using MATLAB and Simulink. You will work with the latest generations of aircraft platforms (both commercial and military). You should have a working knowledge of Fault Detection, Fault Isolation, False Alarm Mitigation, and No Fault Found (Can Not Duplicate). You will develop diagnostic models from schematics, FMECAs, and another available supplier documentation. The chosen candidate will translate these models to a Times Failure Propagation Graph (TFPG) model via scripts. The chosen candidate will also translate the information from the diagnostic models to MATLAB\SIMLINK models via scripts. The chosen candidate will work with a real-time software development team to create the Real Time Maintenance Computing (RTMC) application or other fault diagnostic reasoning engines.
 
Job Number: ESDE_Hazelwood
Job Location: Hazelwood, MO
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12 mon
Start Date: ASAP
Input Date: 05/28/2019
Last Updated: 06/03/2019
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic System Design & Analysis

Description:
Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

Education/experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a master’s degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
 
Job Number: ESDE_OK
Job Location: Oklahoma City, OK, OK
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6 mon
Start Date: ASAP
Input Date: 04/01/2019
Last Updated: 06/03/2019
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

Electronic Systems Design & Analysis Engineer 3 - 373966

Description:
Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
 
Job Number: 373966
Job Location: OK City, OK
Rate: TBD
Duration: 6 - months
Start Date: ASAP
Input Date: 03/11/2019
Last Updated: 07/20/2019
Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

Embedded S/W Engineer - FL - C

Description:
Chipton-Ross is seeking an Embedded S/W Engineer Level 2 for an opening in Orlando, FL.

RESPONSIBILITIES:
Software Engineer to develop and maintain real-time embedded software applications. Typical applications are software products related to image processing, target detection and tracking, missile guidance/ navigation/ control algorithms, missile launchers, system control, built-in test, and system communication. Development will be in C and C++ hosted on either a PC or Unix environment and targeted for an embedded processor running either VxWorks, Integrity or Linux as the real-time operating system. Familiarity with standard communication busses and protocols including RS-232, RS-422, MIL-STD-1553 and Ethernet is helpful but not required. The candidate will have experience with code implementation and integration and test. The candidate will be familiar with using source code control and issue tracking tools along with using modern test tools to do unit test and static analysis. An ideal candidate will be able to configure and manage a continuous test environment. Bonus skills would be familiarity with Agile development, Cyber Security, Department of Defense products, board support package and device driver development.

REQUIRED EXPERIENCE:
Experience with embedded real-time development in C and C++ Experience in software coding, unit test, integration, and verification RTOS experience with VxWorks, Integrity, or Linux Experience with Hardware-Software integration Excellent communication skills.

PREFERRED EXPERIENCE:
Bachelor's Degree in Computer Engineering or Computer Science. Experience generating and maintaining program software documentation such as SRS, ICD, Test Plans, Test Procedures Experience with software configuration management tools such as Razor, Accurev, Git, JIRA, SVN Familiarity with Visual Studio (i.e., Visual C++)

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
9/80, 1st Shift
Full-Time

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 174985
Job Location: Orlando, FL
Rate: Up to $65.00 DOE
Duration: 9 Months
Input Date: 11/07/2018
Last Updated: 07/20/2019
Firm Name: CHIPTON ROSS
Attention: Brenda Ramirez-Velez
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bramirezvelez@chiptonross.com
Website: www.chiptonross.com

Embedded S/W Engineer Level - FL - C

Description:
Chipton-Ross is seeking an Embedded S/W Engineer Level 2 for an opening in Orlando, FL.

RESPONSIBILITIES:
Software Engineer to develop and maintain real-time embedded software applications. Typical applications are software products related to image processing, target detection and tracking, missile guidance/ navigation/ control algorithms, missile launchers, system control, built-in test, and system communication. Development will be in C and C++ hosted on either a PC or Unix environment and targeted for an embedded processor running either VxWorks, Integrity or Linux as the real-time operating system. Familiarity with standard communication busses and protocols including RS-232, RS-422, MIL-STD-1553 and Ethernet is helpful but not required. The candidate will have experience with code implementation and integration and test. The candidate will be familiar with using source code control and issue tracking tools along with using modern test tools to do unit test and static analysis. An ideal candidate will be able to configure and manage a continuous test environment. Bonus skills would be familiarity with Agile development, Cyber Security, Department of Defense products, board support package and device driver development.

REQUIRED EXPERIENCE:
Experience with embedded real-time development in C and C++ Experience in software coding, unit test, integration, and verification RTOS experience with VxWorks, Integrity, or Linux Experience with Hardware-Software integration Excellent communication skills.

PREFERRED EXPERIENCE:
Bachelor's Degree in Computer Engineering or Computer Science. Experience generating and maintaining program software documentation such as SRS, ICD, Test Plans, Test Procedures Experience with software configuration management tools such as Razor, Accurev, Git, JIRA, SVN Familiarity with Visual Studio (i.e., Visual C++)

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
9/80, 1st Shift
Full-Time

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 174982
Job Location: Orlando, FL
Rate: Up to $65.00 DOE
Duration: 9 Months
Input Date: 05/20/2019
Last Updated: 07/20/2019
Firm Name: CHIPTON ROSS
Attention: Zachary Fasano
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: zfasano@chiptonross.com
Website: www.chiptonross.com

Embedded S/W Engineer Level 4 - FL - C

Description:
Chipton-Ross is seeking an Embedded S/W Engineer Level 4 for an opening in Orlando, FL.

RESPONSIBILITIES:
Software Engineer to develop and maintain real-time embedded software applications. Typical applications are software products related to image processing, target detection and tracking, missile guidance/ navigation/ control algorithms, missile launchers, system control, built-in test, and system communication. Development will be in C and C++ hosted on either a PC or Unix environment and targeted for an embedded processor running either VxWorks or Integrity as the real-time operating system. Familiarity with standard communication busses and protocols including RS-232, RS-422, MIL-STD-1553 and Ethernet is helpful but not required. The candidate will have experience throughout the entire software development lifecycle including architecture, design, code implementation, and integration and test. The candidate will be experienced in technical task leadership and/or be a subject matter expert in an area relevant to Client products described in the above paragraph. The candidate will have a strong background in real-time embedded software development along with demonstrated technical leadership. The candidate will be familiar with using source code control and issue tracking tools along with using modern test tools to do unit test and static analysis. An ideal candidate will be able to configure and manage a continuous test environment. Bonus skills would be familiarity with Agile development, Cyber Security, Department of Defense products, board support package and device driver development.

REQUIRED EXPERIENCE:
Experience with embedded real-time development in C and C++ Experience in software architecture, design, coding, unit test, integration, and verification RTOS experience with VxWorks, Integrity, or Linux Experience with Hardware-Software integration Excellent communication skills.

PREFERRED EXPERIENCE:
Bachelor's Degree in Computer Engineering or Computer Science. Experience generating and maintaining program software documentation such as SRS, ICD, Test Plans, Test Procedures Experience with software configuration management tools such as Razor, Accurev, Git, JIRA, SVN Familiarity with Visual Studio (i.e., Visual C++)

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
9/80, 1st Shift
Full-Time

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 174981
Job Location: Orlando, FL
Rate: Up to $80.00 DOE
Duration: 9 Months
Input Date: 11/07/2018
Last Updated: 07/20/2019
Firm Name: CHIPTON ROSS
Attention: Max Cameron
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: mcameron@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded S/W Engineer

Description:
Mandatory
Experience with embedded real-time development in C and C++ Experience in software coding, unit test, integration, and verification RTOS experience with VxWorks, Integrity, or Linux Experience with Hardware-Software integration Excellent communication skills.

Desired
Bachelor's Degree in Computer Engineering or Computer Science. Experience generating and maintaining program software documentation such as SRS, ICD, Test Plans, Test Procedures Experience with software configuration management tools such as Razor, Accurev, Git, JIRA, SVN Familiarity with Visual Studio (i.e., Visual C++)
 
Job Number: 130255
Job Location: Orlando, FL
Input Date: 06/03/2019
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Sanjay Khatri
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer

Description:
Must Be Eligible for a Clearance.

Experience with embedded real-time development in C and C++ Experience in software architecture, design, coding, unit test, integration, and verification RTOS experience with VxWorks, Integrity, or Linux Experience with Hardware-Software integration Excellent communication skills

Experience generating and maintaining program software documentation such as SRS, ICD, Test Plans, Test Procedures Experience with software configuration management tools such as Razor, Accurev, Git, JIRA, SVN Familiarity with Visual Studio (i.e., Visual C++)
 
Job Number: 45962
Job Location: FL
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 06/04/2019
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

Embedded Software Engineer

Description:
Chipton-Ross is seeking an Embedded Software Engineer for an opening in Orlando, FL.

RESPONSIBILITIES:
Software Engineer to develop and maintain real-time embedded software applications. Typical applications are software products related to image processing, target detection and tracking, missile guidance/ navigation/ control algorithms, missile launchers, system control, built-in test, and system communication. Development will be in C and C++ hosted on either a PC or Unix environment and targeted for an embedded processor running either VxWorks, Integrity or Linux as the real-time operating system. Familiarity with standard communication busses and protocols including RS-232, RS-422, MIL-STD-1553 and Ethernet is helpful but not required. The candidate will have experience with code implementation and integration and test. The candidate will be familiar with using source code control and issue tracking tools along with using modern test tools to do unit test and static analysis. An ideal candidate will be able to configure and manage a continuous test environment. Bonus skills would be familiarity with Agile development, Cyber Security, Department of Defense products, board support package and device driver development.

REQUIRED EXPERIENCE:
Experience with embedded real-time development in C and C++ Experience in software coding, unit test, integration, and verification RTOS experience with VxWorks, Integrity, or Linux Experience with Hardware-Software integration Excellent communication skills.

PREFERRED EXPERIENCE:
Experience generating and maintaining program software documentation such as SRS, ICD, Test Plans, Test Procedures Experience with software configuration management tools such as Git, JIRA, SVN Familiarity with Visual Studio (i.e., Visual C++) . Familiarity with Atlassian tool suite.

EDUCATION:
Accredited Bachelor's Degree in Computer Engineering or Computer Science or EE, or equivalent degree, with a background in software development.

WORK HOURS:
9/80, 1st Shift
Full-Time

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 179656
Job Location: Orlando, FL
Rate: Up to $65.00 DOE
Duration: 8 Months
Input Date: 06/03/2019
Last Updated: 07/20/2019
Firm Name: CHIPTON ROSS
Attention: Robert Davis
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: rdavis@chiptonross.com
Website: www.chiptonross.com

Embedded Software Engineer 4

Description:
Chipton-Ross is seeking an Embedded Software Engineer 4 for an opening in Orlando, FL.

RESPONSIBILITIES:
Software Engineer to develop and maintain real-time embedded software applications. Typical applications are software products related to image processing, target detection and tracking, missile guidance/ navigation/ control algorithms, missile launchers, system control, built-in test, and system communication. Development will be in C and C++ hosted on either a PC or Unix environment and targeted for an embedded processor running either VxWorks or Integrity as the real-time operating system. Familiarity with standard communication busses and protocols including RS-232, RS-422, MIL-STD-1553 and Ethernet is helpful but not required. The candidate will have experience throughout the entire software development lifecycle including architecture, design, code implementation, and integration and test. The candidate will be experienced in technical task leadership and/or be a subject matter expert in an area relevant to Client products described in the above paragraph. The candidate will have a strong background in real-time embedded software development along with demonstrated technical leadership. The candidate will be familiar with using source code control and issue tracking tools along with using modern test tools to do unit test and static analysis. An ideal candidate will be able to configure and manage a continuous test environment. Bonus skills would be familiarity with Agile development, Cyber Security, Department of Defense products, board support package and device driver development.

REQUIRED EXPERIENCE:
Experience with embedded real-time development in C and C++ Experience in software architecture, design, coding, unit test, integration, and verification RTOS experience with VxWorks, Integrity, or Linux Experience with Hardware-Software integration Excellent communication skills.

PREFERRED EXPERIENCE:
Experience generating and maintaining program software documentation such as SRS, ICD, Test Plans, Test Procedures Experience with software configuration management tools such as Git, JIRA, SVN Familiarity with Visual Studio (i.e., Visual C++). Familiarity with Atlassian tool suite and Jenkins test tool.

EDUCATION:
Accredited Bachelor's Degree in Computer Engineering or Computer Science, Electrical Engineering or equivalent.

WORK HOURS:
9/80, 1st Shift
Full-Time

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 179657
Job Location: Orlando, FL
Rate: Up to $80.00 DOE
Duration: 8 Months
Input Date: 06/04/2019
Last Updated: 07/20/2019
Firm Name: CHIPTON ROSS
Attention: Robert Davis
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: rdavis@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Manufacture Design Contract Labor 4 / NX 8.5 or later required with PMI knowledge FL

Description:
164950/1764
Engineer Manufacture Design Contract Labor 4 (Job Number: 19009827)

Number of Openings: 3

Location(s): United States-Florida-Melbourne


Shift: 1st Shift

Target Start Date: Jun 17, 2019

Target End Date: Dec 20, 2019

Pay Rate: $55/hr

Work Schedule: 9/80

Duration of Assignment: 12-20-19

3 Openings

Client is seeking experienced Aircraft Structural Designers.

Candidates should have design experience with a focus on metallic structure, wing structure design, machined part design, sheet metal and knowledge of GD&T. Familiarity with military and industry standards pertaining to material, processes and hardware.

NX 8.5 or later required with PMI knowledge a must.

Candidate should be familiar with drawing/PDP release process utilizing Teamcenter.

(Siemens) Teamcenter Enterprise / Teamcenter Unified familiarity a plus.



Qualifications


Basic Qualifications:

Bachelor of Science degree in STEM discipline.

9 years minimum aircraft metallic structural design experience.

CAD Experience using Siemens NX 8.5 or later.


Preferred Qualifications:

Bachelor of Science in Mechanical or Aeronautical/Aerospace Engineering.

Prior experience with Northrop Grumman products. (E-2, JSTARS etc.)

(Siemens) Teamcenter Enterprise / Teamcenter Unified or similar PLM software.

Design of aircraft wing structure.

Familiarity with Design Review Process.

Microsoft Office Suite.

Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplishing them simultaneously.
 
Job Number: JK-1764
Job Location: Melbourne, FL
Rate: 55/hr max
Duration: 6 months
Input Date: 07/15/2019
Last Updated: 07/15/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Engineer Mechanical (Composite Aircraft Design) 3- Secret

Description:
PDS Tech Inc. is seeking a Mechanical Engineer- Secret Clearance, in Melbourne FL.
Active DoD Secret Clearance is required to start. Secret Clearance must have been established or reviewed within the last 6 years. Offer is contingent upon the ability to obtain access to Special Programs (SAP).
Summary:
  • Candidate will be responsible for structural design of primary and secondary composite and metallic aircraft structural parts and assemblies for both new and existing aircraft. 
  • Candidate will work within an Integrated Product Team (IPT) environment, interfacing with IPT leadership, suppliers, customers, and other technical disciplines. 
  • Proficiency with the NX-TeamCenter tool suite and the ability to independently prepare and lead the preparation of product build packages is essential.  
  • Candidate may participate in on-site support at product manufacturing and integration sites. 

Please send your resume to Elisa Petersen at epetersen@pdstech.com or call 316-448-0890. 
Prerequisites:
  • 5+ years of experience in aircraft mechanical design (will consider years of experience/education in lieu of degree).
  • Experience designing composite aircraft primary structure.
  • Proficiency with NX solid modeling software.
  • Proficiency with TeamCenter PLM software.
  • The ability to obtain and maintain access to Special Programs.

 Preferred Qualifications:

  • Bachelor of Science degree in STEM.
  • Proficiency with FiberSim composite definition software.

 
Job Number: 1810089266
Job Location: Melbourne, FL
Duration: 12 months
Input Date: 08/23/2018
Last Updated: 07/19/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Elisa Petersen
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mgGsAAI&URLSource=cjhunter

Engineer Mechanical (Composite Aircraft Design) 4 - Secret

Description:
PDS Tech Inc. is seeking a Mechanical Engineer -4 Secret Clearance, in Melbourne, FL.
Active DoD Secret Clearance is required to start. Secret Clearance must have been established or reviewed within the last 6 years. Offer is contingent upon the ability to obtain access to Special Programs (SAP).
Summary:
  • Candidate will be responsible for structural design of primary and secondary composite and metallic aircraft structural parts and assemblies for both new and existing aircraft.
  • Candidate will work within an Integrated Product Team (IPT) environment, interfacing with IPT leadership, suppliers, customers, and other technical disciplines.
  • Proficiency with the NX-TeamCenter tool suite and the ability to independently prepare and lead the preparation of product build packages is essential.  
  • Candidate may participate in on-site support at product manufacturing and integration sites. 

Please send your resume to Elisa Petersen at epetersen@pdstech.com or call 316-448-0890
Basic Qualifications:
  • 9 Years with Bachelors in Science; 7 Years with Masters; 4 Years with PhD. (Will consider years of experience/education in lieu of degree).
  • Experience designing composite aircraft primary structure.
  • Proficiency with NX solid modeling software.
  • Proficiency with TeamCenter PLM software.

Preferred Qualifications:

  • Bachelor of Science degree in STEM.
  • Proficiency with FiberSim composite definition software.

 
Job Number: 1810089265
Job Location: Melbourne, FL
Duration: 12 months
Input Date: 08/23/2018
Last Updated: 07/19/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Elisa Petersen
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mgGnAAI&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Designer III & IV - (Everett, WA)

Description:
Several openings in WA:

Leads the development of highly complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements. Leads design reviews, design requirement collection, drawing creation and revision. Researches the application of robotics, automation and new technology to support the build plan. Creates off-load packages, specifications, purchase requests and usage instructions for equipment and tooling. Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Establishes and validates spares requirements. Leads the implementation of best practices into functional process documentation to drive standard work. Oversees the development and documentation of equipment and tooling inspection and usage instructions, preventative maintenance plans, and user training. Provides technical direction to support engineering changes and discrepancy resolution. Oversees the maintenance of hardware and software configuration. Assesses and makes recommendations for disposition of equipment and tooling.

CATIA V5

Prefer an AA degree in related discipline and typically 6 or more years of related experience or an equivalent combination of education and experience.
 
Job Number: EquipTDEverett
Job Location: Everett, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 04/18/2019
Last Updated: 06/03/2019
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

FOD (Foreign Object Damage/Debris) Specialist (Top secret (Yankee White) clearance)

Description:
PDS Tech is seeking a Foreign Object Debris/Damage (FOD) Specialist in Patuxent River, MD
 
Top secret (Yankee White) clearance required.



Seeking an experienced, customer focused, self-motivated individual to join the team as an FOD Specialist.  The FOD Specialist will manage and direct a team of employees engaged in activities related to the management of tool cribs and tooling for manufacture and testing of aircraft.  The Tool & FOD Control Manager will also develop, implement, and enforce FOD prevention programs for the site.  This position requires a broad knowledge of company administration policies, procedures, practices and related manufacturing business concepts and their applications.  


Job responsibilities include the following:

  • Enforce and enhance company FOD and tool control processes and procedures at the FAFO site.
  • Plan and direct tool crib activities necessary to meet the goals of the department and company in accordance with established quality and safety standards.
  • Create a workplace environment where quality improvement tools are used effectively to achieve “world class “operations and enterprise excellence objectives.
  • Ensure applicable product quality, aviation/product safety, and workplace health and safety requirements imposed by customers, government oversight agencies, and company executive management are met.
  • Assess training requirements to ensure all direct reports receive appropriate training.

Basic Qualifications
  • Bachelor’s degree or equivalent work experience
  • 2+ years of prior experience in an aircraft maintenance, inventory control, or manufacturing operations environment.
  • Strong team building skills, preferably leading hourly bargaining unit associates.  Demonstrated ability to establish and maintain engaged and productive working relationships.
  • Demonstrated ability to effectively prioritize and manage multiple tasks and responsibilities in a fast-paced environment.  Must be a self-starter who is resourceful and takes initiative.
  • Must possess strong interpersonal skills with the ability to effectively interface with all levels of the organization, suppliers, customers, and governmental oversight organizations.
  • Demonstrated ability to effectively communicate orally, in writing and in group sessions as a member or leader.
  • Must be customer focused and a team player.
  • Must be enthusiastic with a positive outlook and possess a “can-do” work ethic.
  • Must demonstrated experience identifying and implementing continuous improvement initiatives.
  • Must possess general aviation knowledge.
  • Ability to effectively utilize common business computer software such as MS Office and PowerPoint.

 Desired Skills

  • Previous experience managing flight line tool cribs, tool / FOD control programs
  • Prior leadership experience
  • Previous aircraft manufacturing and/or maintenance experience especially rotary-wing aircraft

 
 
 
Job Number: 1910102807
Job Location: Patuxent River, MD
Duration: 15 months
Input Date: 06/05/2019
Last Updated: 07/19/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033jJ7QAI&URLSource=cjhunter

FPGA Design/Verification Engineer - Clearance TX

Description:
163983
1333-1 FPGA Design/Verification Engineer

Work Location: Fort Worth, TX
Status: Open

Qty: 2
Desired Start Date: 1/28/2019
End Date: 8/1/2019

Job Description:
Researches, designs, develops, and tests a variety of electronic equipment and systems, including radar and radiation detection equipment; radio, television and other communications equipment and systems; circuitry components; analog and digital computers; and control and test equipment.

This position is for an engineer working in the Fort Worth IFG Hardware Design Team. Job responsibilities will include supporting development of Hardware, Software & Firmware for aircraft.

Responsibilities include:
• Electronic circuit design including Digital and Analog
• Electronic circuit board design, lay out, and routing
• FPGA development, integration, and test
• Electronic hardware testing and troubleshooting
• Support Software Development efforts for target hardware
• Author and Review Hardware Specifications
• Development and review of detailed engineering documents for firmware and hardware release
• Lead and Develop early career team members

Work Location: Fort Worth, TX
Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: JE-1333-1S
Job Location: Fort Worth, TX
Rate: open
Per Diem: no
Duration: 8 months
Input Date: 03/04/2019
Last Updated: 07/18/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Firmware engineer

Description:
Xpeerant Inc. is looking for:


3 Contractors to support the MS Audio IPS (Logan, MOVAD)

The client’s Diagnostic Engineering team is responsible for their CPU, APU and dGPU IP functional, system, and stress diagnostics development. The team is expected to engage with the IP design team, develop a deep understanding of the IP undertest, develop comprehensive test plans, design and develop high quality diagnostics. The team is responsible for pre-silicon testing in simulation and/or emulation environment, execution of post-silicon, and delivery of targeted system/stress tests for client’s System Level Test (SLT) manufacturing test and even external customer production test.

We are seeking qualified Sr/MTS engineers focusing on IP diagnostics development and verification. In this role, the key responsibilities include, but are not limited to, the following:
1. Work with design team/SoC architecture to understand the IP and verification methodology.
2. Work with diagnostics framework team to understand diagnostics frameworks.
3. Develop tests and/or port tests from design/external team based on the existing diagnostics frameworks of client
4. Execute those tests in pre/post silicon environment.
5. Debug test failures until root cause RTL bug or software bug.
6. Compile report for IP functional failure or RTL bug to program manager & diagnostics SoC architecture.
7. Delivery qualified tests to diagnostics release team for external release.

The ideal candidate should be a quick learner, a strong team player, independent problem-solving driver and could thrive in a dynamic environment with passion about developing leading-edge products into market.

Qualifications:
• BASc/BSc (or greater) in Computer Science, Computer Engineering or Electronics Engineering.
• Excellent technical communication, interpersonal and teamwork skills
• Excellent programming skills with demonstrated experience in C++
• Outstanding independent cross-functional problem solving and debugging skills
Required Skills:
• 3+ years demonstrated software engineering experience in Linux or Linux driver domain strongly preferred.
• Excellent knowledge of x86 architecture with an emphasis on hardware interfaces
• Strong debug experience with GDB to identify critical software bugs
• Experience with complex software systems and architectures.
• Experience with software performance analysis, optimization and low-level programming
• Experience with cmake build system.
• Experience with GCC/Clang compilers.
• Experience with source control (svn, git, Perforce, etc)
• Fast learner, adaptable, self-starter who can work both independently and collaborate well within dynamic team environment.
 
Job Number: x20190070
Job Location: Austin, TX
Duration: 12 Months
Input Date: 07/10/2019
Firm Name: XPEERANT
Attention: Woody Arnold
Address: 4518 SEABOARD LN
City, State: FORT COLLINS, CO 80525
Phone: 970/282-9287
Website: www.xpeerant.com

Flight Test Instrument Engineer

Description:
Flight Test Instrument Engineer

Windsor Locks, CT
$67/hr
1 year W2 contract
First Shift

Description:
Design, implement, and maintain test processes for Space Systems hardware using lean philosophies and techniques. Take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing. This can involve testing, data analysis, and interface with all aspects of the engineering department.

Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program. Responsibilities also include daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met.

Typical Duties:
Support laboratory testing of Space hardware, Develop and validate tooling concepts, Author and maintain operation/test procedures, Preparation of standardized operation/test sheets, Defining test rig and facility requirements, Participation on program Integrated Product Development teams, Review drawings and concepts, and resolve productivity concerns.

Experience with advanced electrical instrumentation and data acquisition systems is required.
Knowledge of LabVIEW desired. Experience should also include five years working on the testing of complex electrical systems, testing and troubleshooting of complex FPGA (Fully Programmable Gate Array), digital and analog based electronic controllers, testing of components such as HED (Hall Effect Device) based pumps and brushless DC motors.
Applicant must have the capability of working independently and be self-motivated.
Excellent communication skills, written and verbal are required. Ability to proficiently operate common Microsoft Office software products is required.

-Bachelors degree required
 
Job Number: 10744
Job Location: Windsor Locks, CT
Rate: 67
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 04/05/2019
Last Updated: 07/18/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: rex@inconen.com
Website: www.inconen.com

Flight Test Instrument Engineer

Description:
Flight Test Instrument Engineer

Windsor Locks, CT
$67/hr
1 year W2 contract
First Shift

Description:
Design, implement, and maintain test processes for Space Systems hardware using lean philosophies and techniques. Take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing. This can involve testing, data analysis, and interface with all aspects of the engineering department. Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program.

Responsibilities also include daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met.

Typical Duties: Support laboratory testing of Space hardware, Develop and validate tooling concepts, Author and maintain operation/test procedures, Preparation of standardized operation/test sheets, Defining test rig and facility requirements, Participation on program Integrated Product Development teams, Review drawings and concepts, and resolve productivity concerns.

Experience with advanced instrumentation and data acquisition systems is required.
Knowledge of LabVIEW desired.
Experience should also include five years working on the testing of complex mechanical systems, testing of complex mechanical systems, testing of components such as, heat exchangers, pumps, fans, & accumulators. Applicant must have the capability of working independently and be self-motivated.
Excellent communication skills, written and verbal are required.
Ability to proficiently operate common Microsoft Office software products is required.

-Bachelors degree required
 
Job Number: 10637
Job Location: Windsor Locks, CT
Rate: 67
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 03/18/2019
Last Updated: 07/18/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: rex@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight/Mission/System Test Engineer

Description:
• Supports the development and verification of test methods.
• Develops detailed test procedures, and instrumentation and configuration definition, needed to perform the test and minimize risk within the constraints of the test plan.
• Develops solutions to calibration systems problems of limited scope and impact.
• Designs test hardware, software and systems to achieve test requirements.
• Uses analytical tools to verify the design.
• Analyzes, processes, and formats data to customer requirements.
• Reviews test data, including off-nominal data, for accuracy, quality and/or fidelity prior to delivery to customer.
• Prepares and publishes test reports to document test results and satisfy requirements.
• Presents test results internally.
• Archives data and reports.
• Trains others.
• Works under general direction.
 
Job Number: T&EESeattle
Job Location: Seattle, WA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 9 mon
Start Date: ASAP
Input Date: 05/28/2019
Last Updated: 06/03/2019
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Shailendra Mishra
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Foreign Object Debris/Damage (FOD) Specialist (Top secret (Yankee White) clearance)

Description:
Top secret (Yankee White) clearance required.

Seeking an experienced, customer focused, self-motivated individual to join the team as an FOD Specialist. The FOD Specialist will manage and direct a team of employees engaged in activities related to the management of tool cribs and tooling for manufacture and testing of aircraft. The Tool & FOD Control Manager will also develop, implement, and enforce FOD prevention programs for the site. This position requires a broad knowledge of company administration policies, procedures, practices and related manufacturing business concepts and their applications.

Job responsibilities include the following:
• Enforce and enhance company FOD and tool control processes and procedures at the FAFO site.
• Plan and direct tool crib activities necessary to meet the goals of the department and company in accordance with established quality and safety standards.
• Create a workplace environment where quality improvement tools are used effectively to achieve “world class “operations and enterprise excellence objectives.
• Ensure applicable product quality, aviation/product safety, and workplace health and safety requirements imposed by customers, government oversight agencies, and company executive management are met.
• Assess training requirements to ensure all direct reports receive appropriate training.

Basic Qualifications
• Bachelor’s degree or equivalent work experience
• 2+ years of prior experience in an aircraft maintenance, inventory control, or manufacturing operations environment.
• Strong team building skills, preferably leading hourly bargaining unit associates. Demonstrated ability to establish and maintain engaged and productive working relationships.
• Demonstrated ability to effectively prioritize and manage multiple tasks and responsibilities in a fast-paced environment. Must be a self-starter who is resourceful and takes initiative.
• Must possess strong interpersonal skills with the ability to effectively interface with all levels of the organization, suppliers, customers, and governmental oversight organizations.
• Demonstrated ability to effectively communicate orally, in writing and in group sessions as a member or leader.
• Must be customer focused and a team player.
• Must be enthusiastic with a positive outlook and possess a “can-do” work ethic.
• Must demonstrated experience identifying and implementing continuous improvement initiatives.
• Must possess general aviation knowledge.
• Ability to effectively utilize common business computer software such as MS Office and PowerPoint.

Desired Skills
• Previous experience managing flight line tool cribs, tool / FOD control programs
• Prior leadership experience
• Previous aircraft manufacturing and/or maintenance experience especially rotary-wing aircraft
 
Job Number: 1910102807
Job Location: Patuxent River, MD
Per Diem: split
Overtime: possible
Duration: 15 months
Start Date: ASAP
Input Date: 06/27/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

Fuel Systems Engineer

Description:
Fuel System Engineer responsible for the design of the Fuel System and related system integration. This includes requirements definition, specification and ICD creation, Supplier coordination, test execution, drawing creation, product certification, product improvement, and field support. Ability (or interest) to conduct fuel system performance analysis using 1-D fluid flow simulation software (i.e. Flowmaster, AMESim or similar analytical tools) is highly desired, but not required.

Duties and Responsibilities:
• Communicates effectively in both verbal and written format. Candidate should be able to adjust communication content and approach based on audience
• Manages task execution to ensure on-time and on-target completion
• Searches for problem root cause and develop corrective action plans and solutions
• The primary role of this position within the team will be as a general fuel system engineer. Specifically, this will entail:
o Support fuel system production and field issues with troubleshooting.
o Implement design improvements to the current fuel system design.
o Interface with current fuel system suppliers to manage supplier changes
o Participate in testing including supplier qualification testing, and flight testing
o Able to manage the certification aspects of major and minor changes including test plans, test reports and analysis reports that will be submitted to the FAA
• An additional role for this position within the team will be as a fuel system performance analyst; is desirable to find a candidate that has proficiency or interest in performing this analysis, but not a required skill. If interested, this role will entail
o Modeling the fuel system using a 1-D fluid flow simulation software such as AMESim or Flowmaster
o Performing performance assessments of the fuel system including tank filling performance, fuel distribution and supply performance, vent system performance, unusable fuel simulations, negative acceleration simulations and other system performance simulations
o Comparing analysis results to flight test data
o Evaluating performance impact of proposed design changes
o Writing reports documenting analysis results
• Additional roles within the team may be available at different program phases

Education, Work Experience, Certification and/or Licensure:
• BS in Engineering with 5 or more years directly related experience or MS in engineering with 3 or more years of experience
• Previous aerospace experience at either Supplier or OEM
• Some Travel will be required


Knowledge, Skills and Abilities:
• Familiar with industry documentation for design, test, and certification of propulsion systems
• Proficient in Microsoft Office Products.
• Familiar with FAR Part 23 or Part 25.
• Familiar with Industry standards such including DO-160, MIL-HDBKs and SAE ARPs.




The Structures Company is an AA/EOE.
 
Job Number: 297
Job Location: NC
Rate: OPEN - **DOE**
Per Diem: Yes
Overtime: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 07/15/2019
Last Updated: 07/19/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Full Stack Engineer for DevOps

Description:
At our client’s facility , they push the boundaries of what is possible. We believe in changing the world for the better by driving innovation in high-performance computing, graphics, and visualization technologies building blocks for gaming, immersive platforms, and the data center.

Developing great technology takes more than talent: it takes amazing people who understand collaboration, respect, and who will go the extra mile to achieve unthinkable results. It takes people who have the passion and desire to disrupt the status quo, push boundaries, deliver innovation, and change the world. If you have this type of passion, we invite you to take a look at the opportunities available to come join our team.

2. The role

You are curious, persistent, logical and clever – a true techie at heart. You enjoy living by the code of your craft and developing elegant solutions for complex problems. If this sounds like you, this could be the perfect opportunity to join client's Machine Learning Software Engineering (MLSE) organization as a Full Stack Engineer for DevOps.

Client's MLSE is looking to strengthen our Development Operations practice by identifying talented Full Stack Engineers to enhance our platform that enables our DevOps workflows. Our ideal candidate will possess skills that make them a subject matter expert in full stack development with exposure to CI systems, infrastructure, automation and security.

3. Responsibilities

• Design and implement microservices for delivering next generation DevOps
Infrastructure
• Develop and deliver user interactions as part of next generation DevOps
Infrastructure
• Deliver readymade containers for various stakeholders to enable their workflows
• Implement best practices and emerging concepts in DevOps, Infrastructure
Automation and Enterprise Security
• Troubleshoot, profile existing/ new implementations for improvements
• Provide technical leadership and guidance to other team members
• Create technical documentation/ user guides for implemented solutions

4. Requirements

1. Strong end-to-end full-stack development experience - from implementation to
packaging to delivery
2. Strong experience in implementation of microservices, preferably in Python
3. Expertise with Bash, MongoDB, Python, Angular/ Vue JS, Flask/ Django/ NodeJS,
HTML5, CSS, Bootstrap
4. Strong implementation experience in implementing/ consuming REST API and
building workflows based on REST API
5. Expertise in developing and deploying docker based services
6. Experience in working with Enterprise messaging frameworks like RabbitMQ
7. Solid knowledge of design and architecture patterns
8. Good to have: Experience in DevOps practices, Software Development, Integration
and Delivery methodologies and Test Frameworks
9. Good to have: Automation frameworks like Ansible, Puppet, Chef, Saltstack
10. Good to have: Experience in Linux application development using linux development
tools - GCC, Cmake; Packaging - Debians/ RPMs
11. Good to have: Usage/ Knowldege of cloud environments; Kubernetes
12. Good to have: Good understanding of networking fundamentals - DHCP, DNS, PXE,
VLAN/ VXLAN etc..
13. Practical expertise in performance tuning and optimization, bottleneck problems
analysis
14. Active community member and contributor to open source projects is a plus
15. Solid technical expertise and troubleshooting skills
16. Fluent verbal and written English

5. Minimum Preferred Qualifications

1. Bachelors Degree in Software Engineering/ Computer Science/ Electrical/ Electronics
engineering
2. 5+ years of experience in software development
 
Job Number: x20190068
Job Location: Santa Clara, CA
Duration: 12 Months
Input Date: 06/23/2019
Firm Name: XPEERANT
Attention: Don Semple
Address: 4518 SEABOARD LN
City, State: FORT COLLINS, CO 80525
Phone: 970/282-9287
Website: www.xpeerant.com

Functional Safety Manager

Description:
PDS Tech, Inc. is seeking a Functional Safety Manager in Kokomo, IN.

Summary:

  • Our vision is efficient, electrified vehicles for future transportation.
  • Come work with deeply experienced technical team with 25+ years of experience in design, development and manufacturing in a fast-paced development environment.
  • Offer an opportunity to analyze,  design, and test Power Electronics Inverter Systems for Hybrid and Electric Vehicles.

 Responsibilities and Duties:

  • Develop Technic Safety Concept (TSC) based on customer Functional Safety Goals, per ISO26262.
  • Develop Technical Safety Requirements (TSR), derived from TSC.
  • Develop Software Requirements Documentation (SRD), derived from TSR.
  • Allocate functional safety requirements to specific hardware & software elements and track implementation status.
  • Develop test strategies to verify implementation vs. functional safety requirements.
  • Provide necessary analysis (torque and power analysis, electric machine controls) to justify TSC and TSR.
  • Analyze technical safety architecture to achieve TSC, TSR, SRD and Hardware Safety Requirements (HSR) content.
  • Perform Functional Safety Analysis (FMEA, FTA, FMEDA).
  • Travel weekly to Indiana for 1st 3 months then based in Auburn Hills, MI.

Basic qualifications:
  • Bachelor’s Degree in electronics or electrical engineering.
  • 5+ years of engineering experience.
  • 2+ years’ experience on a power electronics project (Inverter, DC/DC converter) as a system engineer.

 Nice to haves (preferred qualifications):

  • Development of automotive embedded systems and microprocessors, systems simulation and modeling tools (e.g. Matlab/Simulink).
  • Familiarity with electric/hybrid vehicles, electric drives and electric machine controls, high voltage inverter and DC/DC converter topologies.
  • Knowledgeable on analysis methodology (SFMEA, FTA, FMEDA).
  • Experience on the use of engineering analysis tools: Medini Analyze, Reliability Workbench, APIS-IQFMEA).

 
Job Number: 1910101484
Job Location: Kokomo, IN
Duration: 12 months
Input Date: 04/29/2019
Last Updated: 07/19/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Alex Lieberman
Address: 1839 S ALMA SCHOOL RD STE 250
City, State: MESA, AZ 85210
Phone: 480/929-9922
800 Phone: 800/657-0997
Fax Phone: 480/929-9779
Email: cecjphoenix@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033erbQAA&URLSource=cjhunter

Geo Technician IV

Description:
Geo Technician IV           
Duration.  6 months renewable. 
Location.  Anchorage tower. 
 
Assignment Scope: Responsible for geoscience related database management. Provides computer-assisted geologic support to G&RE staff. Generates and interprets maps to assist with evaluations. Tracks and reports progress of 3rd party drilling and completion activity. Serves as a liaison between the asset team and various industry partners in order to obtain requested geologic and engineering data associated with 3rd party wells. Manages petrophysical, geochemical, core, cuttings and fluid data in an active development play. Creates and maintains databases for geologic and engineering data. Makes QC’d and processed data readily available to end-users. Loads and formats data into critical databases (Petrel, Opeworks, Techlog).  Liaises with other support teams to update development team maps. Acts as a go-to resource for spatial analyses that are required by team members. Creates and maintain geoscience, engineering and industry activity maps in ArcGIS. Updates well performance data in ArcGIS for existing and planned wells on a routine basis. Acts as a DSM coordinator and support for the team. Coordinates submittal of hard copy of well logs for digitizing and rasterizing. At least 5-7 years of experience. Intermediate to senior level. Provides technical/functional and/or administrative support. General working knowledge of specific systems (Petrel, Openworks, ArcGIS), terminology and procedures used within the department. Performs routine tasks. Able to solve problems and make basic decisions.
 
 
 
        
         
         
         
         
         
         
                                                              

 
 
CategoryNameRequiredImportanceLevelLast UsedExperience 
EducationHigh School Diploma/GEDYes5     
EducationBachelor's DegreeNo5     
GeneralPetroleum IndustryYes7     
Skills/ExperienceAttention to DetailYes9     
Skills/ExperienceMethodical Approach to Problem SolvingYes7     
Skills/ExperienceOrganizational SkillsNo5     
SoftwareMS OfficeYes8                                                          

 
Job Number: 1810091720
Job Location: Anchorage, Ak
Duration: 6 months
Input Date: 03/14/2019
Last Updated: 07/19/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Luke Polansky
Address: PACIFIC OFFICE CENTER
310 K ST STE 200

City, State: ANCHORAGE, AK 99501
Phone: 907/562-1633
Fax Phone: 855/685-1397
Email: cecjanchorage@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002f0qSAAQ&URLSource=cjhunter

Government Property Management Specialist 3

Description:
Chipton-Ross is seeking a Government Property Management Specialist Level 3 for an opening in Oklahoma City, OK.

RESPONSIBILITIES:
Administers the terms of contract provisions that specify the company's obligations to acquire, control, use, care for, report and dispose of property. Performs audits, documents processes and procedures and investigates and reports lost or damaged property. Provides support, expertise, concepts and formats to enhance and manage information by utilizing off-the-shelf software or client system tools to manage and communicate property information and to establish a property record for company or government property. Maintains accountability from initial acquisition to final disposition. Tracks the movement of property by coordinating, preparing and documenting applicable forms to accomplish a change of ownership, accountability or location in accordance with applicable government regulations, customer contracts or corporate policy. Determines property acquisition requirements, product availability and authority to fulfill company, program or contractual obligations. Ensures that property is allowable, reasonable, allocable and utilized in accordance with company or contract requirements. Coordinates the physical inventory of property and reconciles results to ensure compliance with regulations. Verifies that property records accurately reflect inventory on hand and that equipment servicing requirements are established by responsible organizations. Confirms that work is scheduled and performed in accordance with applicable government regulations, customer contracts, corporate policy or recommended industry standards Reviews records for accuracy and reviews processes for compliance to established procedures and guidelines. Participates in the development and implementation of tools, processes and procedures. Handles disposition of property identified by company, legal or contractual requirements in accordance with procedures. Completes all property related activities at completion or termination of contract including disposition of property. Ensures all inventory adjustments, liability determinations and title issues are resolved. Participates in the development and implementation of tools, processes and procedures.

EDUCATION:
Accredited Bachelor's and typically 6 or more years related work experience, a Masters degree and typically 4 or more years related work experience or an equivalent combination of education and experience.

TRAVEL: YES
Less than 10%

FULL TIME/FIRST SHIFT
WORK HOURS: 7:30 AM - 4:00 PM

MISCELLANEOUS:
The candidate selected to fill this assignment must successfully pass a credit check performed by the client.
 
Job Number: 179029
Job Location: OK City, OK
Rate: $DOE
Duration: 12 Months
Input Date: 04/29/2019
Last Updated: 07/20/2019
Firm Name: CHIPTON ROSS
Attention: Silmese Graves
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: sgraves@chiptonross.com
Website: www.chiptonross.com

Graphical User Interface Software Engineer

Description:
Chipton-Ross is seeking a Graphical User Interface Software Engineer for an opening in Arlington, TX.

RESPONSIBILITIES:
This is a hands on software engineering position.
The primary responsibility of this position is supporting the development of customer's Instructor Operator Station (IOS) Graphical User Interface (GUI). Job duties include product code generation, testing, and integration with other training environment components. The system includes 2D & 3D graphics and some of the product development will require utilizing graphic technologies. Candidate should be a fast learner with very strong analysis and problem-solving skills with the ability to carry tasks through to completion with only general technical direction.

REQUIRED EXPERIENCE:
Experience with C++
Experience with GUI development
General understanding of computer networking communications
OpenGL or Direct X experience
OpenSceneGraph
Solid understanding of Object Oriented languages and Design (OOD) concepts
Experience working in a team environment
Good communications skills

PREFERRED EXPERINCE:
Qt 4.8+ programming experience.
Experience with Microsoft Visual Studio
Experience developing graphical maps and plots in 2D and 3D.
Experience with geospatial display software.
General understanding of operating system concepts multi-threading, events, semaphores, memory management, and system configuration
Bonus:
Familiarity with Perforce and Atlassian tools a plus.

EDUCATION:
Accredited Bachelor's Degree in computer science or related engineering, science, or math discipline

WORK HOURS:
9/80, Day Shift
Full-Time

IND123 RD1
 
Job Number: 179759
Job Location: Arlington, TX
Rate: $35 to $50.00 DOE
Duration: 6 Months
Input Date: 06/07/2019
Last Updated: 07/20/2019
Firm Name: CHIPTON ROSS
Attention: Robert Davis
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: rdavis@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Guidance Navigation & Control Engineer (Embedded Software Development)

Description:
Client is seeking a multi-disciplinary engineer to design, implement, and verify embedded flight electronics software algorithms, working under minimal direction.

Responsibilities include:
• Eliciting and defining the software requirements.
• Designing, implementing, and integrating a solution to meet the requirements.
• Planning and executing the validation of the requirements and verification of the solution.
• The solution design and implementation are developed using Model-Based Design languages (Simulink, embedded MATLAB, and Stateflow), from which C++ code will be generated.

Area of Expertise:
•Embedded Software Development
•FAA certification requirements

Technical Skills:
•Simulink
•Version Control
•Requirements Development
 
Job Number: GNCDEC
Job Location: Long Beach, CA
Rate: Best in Market
Per Diem: Possible
Overtime: Possible
Duration: 6 mon
Start Date: ASAP
Input Date: 03/25/2019
Last Updated: 06/03/2019
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

Hardware Technicians

Description:
GENERAL DEFINITION
 
This is full performance voting machine maintenance and minor repair work. Technicians will have a thorough checklist for each voting equipment and will perform various diagnostic tests through the technician menu.
 
 
Responsibilities:
• Documenting and reporting all hardware and software anomalies and issues system; as well as developing practical field solutions to common problems.
• Develop expertise in the use, maintenance, repair and application across all DVS product lines.
• As assigned, provide on-site customer support on-site, or via telephone and/or email.
• Pre- and post-election systems testing (Logic and Accuracy Testing).
• Software upgrades, troubleshooting, and maintenance of all voting system.
• Coordination of Returned Merchandise Authorization (RMA) as necessary.
• Other assigned tasks/responsibilities as needed or assigned.
 

 
 
Job Number: 1910100727
Job Location: Denver, CO
Duration: 3 months
Input Date: 04/08/2019
Last Updated: 07/19/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Jason Andrzejewski
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Email: cecjnrt@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033clbQAA&URLSource=cjhunter

Helpdesk/Deskside Support Engineer

Description:
PDS Tech, Inc. is seeking a Helpdesk/Deskside Support Engineer for an open position in Irving, TX
3-6 Months Contract to hire
 
 

Job Requirements:
  • Minimum A+ Certification, Network + certification or job experience.
  •  Basic VPN tunneling knowledge.
  •  Basic Networking troubleshooting experience.
  • Level 2/3 Desktop Support working with C/Corporate level 
  • Understand the concepts of a router, switch and firewall. Ability to provide writing reports to management.
  • Associates degree in Computer Science or related area is preferred.
  • Certifications: A+, Network+ or other training in related field is preferred.
  • Experience in remote support of networking Multi-Function printers including trouble shooting printing and scanning issues.


Skills:

  • Knowledge of the operation and support of computers, local area networks, and printers. Knowledge of standard networking protocols, knowledge software applications and operating systems, including but not limited to Windows XP/7 and QuickBooks.
  • Ability to read and understand technical manuals and procedural documentation.
  • Ability to convey complex information to others, communicate both verbally and in written form, analyze and troubleshoot technical and computer-related problems.




 

 
Job Number: 1710064649
Job Location: Irving, TX
Duration: 12 months
Input Date: 02/13/2019
Last Updated: 07/19/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Satish Gadasu
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021NJIAA2&URLSource=cjhunter

IA Cyber Engineer TS/SCI, Richardson TX 75082

Description:
PDS Tech, Inc. is seeking a Cyber Engineer, in North Richardson, TX 75082. Contact Elisabeth Laspe for details. 314-669-8020 elaspe@pdstech.com

12 month Contract with possible extensions. Must have an Active Top Secret/Sensitive Compartment Information (TS/SCI) Clearance to qualify. 
Typical responsibilities include: 

Technical implementation of security solutions comprised of COTS as well as custom-developed products 
• Preparation of documentation to support Assessment & Authorization activities 
• Arrange, support and/or lead Cyber Security activities for program sell-off of security related requirement 

Applied knowledge of current IA policies as a contributor to the architecture and design of secure solutions to support customer needs and requirements 
• Preparing for, writing, and presenting trade studies, cost benefit analyses, reports and briefings as required 
Clearance Requirements: 
 Must be a U.S. CITIZEN with an active Top Secret/Sensitive Compartmented Information (TS/SCI) security clearance 

Requires the Aptitude to: 
Apply extensive technical expertise in Cyber Security Engineering 
• Full knowledge of other related disciplines 
• Develop technical solutions to complex problems that require the regular use of ingenuity and creativity 
• Work without appreciable direction 
• Exercise considerable latitude in determining technical objectives of assignment 
• Guide the successful completion of major programs and function in a project leadership role 
• Represent the organization as the prime technical contact on contracts and projects 
• Interact with senior external personnel on significant technical matters often requiring coordination between organizations 
Required Skills: 
Demonstrated experience in cybersecurity to include practices/methodologies, associated technologies, application design, and/or experience in an operational environment including NISPOM and/or ICD 503 guidelines, directives and security mandates 
Experience with cyber security engineering projects and programs for U.S. Government and/or commercial clients 
Strong understanding of security design and architecture with the ability to recommend solutions to moderately complex IS compliance and security problems 
• Hands-on technical experience as an individual contributor with documentation skills and experience in, at minimum 4, of the following areas: 

o Linux system administration 
o Windows system administration 
o Network component administration 
o VMware administration 
o Operating system hardening 
o Nessus Vulnerability Scanner 
o Vulnerability assessment testing, analytics and remediation 
o Software and/or Protocol(s) (LDAP/Active Directory, Tripware) 
o Certification and Accreditation (SP800-57, ICD503 preferred) 
o Developing System Security Plans (SSPs) and all supporting certification and 
accreditation documentation (e.g. XACTA) 

• Ability to work in a collaborative, multi-discipline environment to produce deliverable products 
• Excellent written and oral communication skills 
• Experience with Microsoft Office suite of tools, particularly Excel, Project, and PowerPoint 
• Willing to work overtime and weekends as required to achieve milestones 
• Proven ability to collaborate with internal company contacts as well as inter-organizational and outside customer contacts on routine matters

Desired Skills:
Experience in the design and development of cloud-based systems, security architectures and analytics development
• Security Certifications in accordance to DoD 8570 (IAT Level I preferred); Security +; CISSP; SANS GSEC

• Knowledge of software development lifecycle models (waterfall and Agile) and program lifecycle modes
• Experience in CONOPS / OPSCON development, especially in workflow related area to this domain
• Experience analyzing and decomposing requirements using DOORS
• Ability to the identify, manage, and mitigate technical risk
• Knowledge of Cost Account Management (CAM)
• Knowledge of Earn Value Management System (EVMS)
• Qualified Raytheon Six Sigma Specialist or equivalent

Required Education:
6 years with a BS in Science, Technology, Engineering or Math or related technical degree; 4 years with a MS in Science, Technology, Engineering or Math or related technical degree
 
Job Number: 1910102619
Job Location: Richardson, TX
Duration: 12 months
Input Date: 05/24/2019
Last Updated: 07/19/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Elisabeth Laspe
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033iMXQAY&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer II

Description:
Position Purpose:
Under minimal supervision, provides Industrial Engineering support through the application of classical and Lean Industrial Engineering principles. Assures assigned projects are accomplished within projected or approved cost.

Unique Skills:
• Capability of performing capacity analysis (ARENA or other software) preferred.

Education and Experience Requirements:
• Bachelor's Degree in Industrial, Manufacturing Engineering or related curriculum or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen (18) months Industrial Engineering, Manufacturing Engineering, Operations Engineering or related technical experience.

Principle Duties and Responsibilities:
• Conduct analysis with area Management and support staff to establish and maintain daily work activities.
• Conduct analysis with area Management, support staff and Material Control to design and maintain part presentation requirements and procedures.
• Identify equipment, machinery, and facilities acquisition including justifications and economic analysis to support operational, Safety and Quality initiatives.
• Development and maintain Tool Box requirements and contents to include tool control, FOD prevention measures tool requirements matched to area tasks.
• Apply 3D print capability to assist in resolution of technical issues (shop aids, Protect the Product, etc.).
• Provide business case analysis in support of projects to include make/buy, MCR, Engineering Changes, Tooling requests.
• Support all Safety, Sustainability and Ergonomic initiatives as required.
• Develop and Implement plant layout, process flow, and material handling techniques.
• Support area Management in generating orders/requests for Tooling including management of tool priorities.
• Investigate, evaluate, and implement facilities expansions, department rearrangements, new technologies and manufacturing techniques, and employee suggestions.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of IE policies and procedures.
• With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
• Develop and maintain work place methods and manpower requirements.
• Assist in the training and development of entry-level industrial engineering personnel.
• As required, aid in development and maintenance of Business Continuity Plan. Perform other duties as assigned.

Other Requirements:
• Proven knowledge of Lean and/or Six Sigma principles.
• Ability to influence across functional disciplines.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Demonstrated ability to operate computerized equipment, such as personal computers, CATIA, etc.
• Lean Specialist certification or higher preferred.
 
Job Number: 24-358
Job Location: Tulsa, OK
Rate: $52.50/hr
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 05/09/2019
Last Updated: 05/31/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

Industrial Engineer-2,3,4 in WA

Description:
Industrial Engineer

Location: Renton, WA
Duration: 6 months

Job Description:
Ideal candidate has experience on 737 program and with precedence modeling software (Aurora or similar software.) Must also have had shop floor experience

Applies advanced Industrial Engineering concepts, techniques, analysis and decision tools to promote and implement changes in manufacturing, engineering and service operations. Independently develops models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provides summary analysis and metrics for consultation to customers (e.g., management, departments, suppliers). Applies advanced industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements. Researches, designs, develops, improves, and implements processes to enhance schedule performance, lower cost, and improve quality, through the application of advanced Lean and other Industrial Engineering concepts for large scale systems integration and asset utilization. Independently manages, defines, negotiates, and controls the scope, cost, and timing of projects, and performs risk analysis using project management tools (e.g., work break-down structure, precedence network, resource allocation). Ensures project is completed within budget. Utilizes advanced engineering methods (e.g., mathematical models, simulation, statistics) to develop optimal process designs and efficient utilization of resources (e.g., facilities, personnel, materials, equipment) in the creation and validation of products. Analyzes and designs value stream, including capability, capacity (e.g., make/buy, supplier selection, risk analysis, supplier performance), throughput, work flow and logistics (e.g., critical path, lead-time, transportation, factory layout).

Education / Experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

Skill Code:
D26-Mfg Industrial Engrg
 
Job Location: Renton, WA
Per Diem: Split
Duration: 6 Months
Start Date: ASAP
Input Date: 05/30/2019
Last Updated: 07/16/2019
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Email: mzoheb@iconma.com
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Infrastructure Engineer

Description:
Title of Position: Infrastructure Engineer

Salary: Negotiable for qualified candidate

Position: Direct Hire, FTE, Full Benefits

Interview process: 2 Phone Screens to Start, followed by a Face-to-Face meeting.

Talent Acquisition company: Nesco Resource

Location: Southfield MI as a base. Candidate will be asked to travel to 6 different plants in the Detroit metro area. Mileage will be paid to the employee. Saginaw, Sterling Heights, Shelby, etc.



Experience: 5 years + as an Engineer, 8 -10 year as a IT Infrastructure professional



Basic Responsibilities: 2nd and 3rd level support of the organization's corporate infrastructure and all of its hardware/software components. Including both design and installation of hardware/software. Strong network experience is a must. The client uses Cisco network/products at their local plants.



Responsibilities include:

Demonstrating ownership of IT systems and processes by taking responsibility for operational availability of a secure, effective and reliable computing environment that meets or exceeds staff and business requirements.

  • Following emerging technologies, standards, and developments within the industry to assist in planning and purchases for increased system capacity to meet the needs of a company growing both in size and in technical needs.

  • Continuously monitoring and evaluating existing IT controls and procedures to ensure all risks are known and mitigated to an acceptable level in both production and non-production environments.

  • Daily support of on-premises platforms running VMware

  • Maintains systems and technology at or above industry standards.

  • Configure and maintain the organization's internal computer network, mainly Cisco Firewalls, Switches and Spam filters.

  • Proactively monitoring server health in a production environment to ensure any failure can be responded to quickly and with minimum downtime

  • Experience working with VMware, Active Directory, GPO's, and O365

  • Providing Tier 2 and 3 level user and hardware support of Windows based network systems


Qualifications:


  • Bachelor's Degree in Computer Science/Computer Engineering/Network Engineering/Information Technology required, Bachelor's preferred (comparable IT certifications will be considered).

  • Minimum of 3-5 years' experience Configuring, managing and troubleshooting firewalls, routers and Switches, knowledge of Cisco firewalls and switches highly desired

  • Knowledge of core IT infrastructure and systems including LAN/WAN networking including routers, switches and firewalls, and SAN storage

  • Strong knowledge of Windows Server environment

  • Knowledge of VMWARE virtualization in server environment

  • Knowledge of Active Directory & GPO's

  • Knowledge of O365

  • Any past experience migrating from on premise infrastructure to IaaS, PaaS, and SaaS model would be a 'plus' but not needed to get the job

  • Backup experience

  • Knowledge of enterprise anti-virus

  • Advanced ability to analyze system logs

  • Ability to work tasks with little supervision or assistance

  • Must consent to a full background check, including a drug screen


Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-19912
Job Location: Southfield, MI
Rate: 85000.0USD/Year
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-06-03 00:00:00.0
Input Date: 05/15/2019
Last Updated: 06/20/2019
Firm Name: NESCO RESOURCE
Attention: Erica Lozon
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

Instrument Engineer

Description:
The Instrument Engineers are responsible for: reviewing instrument vendor data submittals to insure technical compliance with the specifications; generating material takeoffs that may be used to estimate material and labor requirements for the project cost estimate; generation of purchase documentation; creation and maintenance of the instrument index / IO list; and participating in constructability reviews. This group may also be called upon to provide field assistance during the construction and startup efforts.
In addition to standard specifications, which were developed to aid in the design and provide guidance to suppliers and installers of the instrumentation related components., the following software is utilized on various projects to aid in the solution and increase the efficiency of instrumentation and process controls related tasks, knowledge and proficiency is required:
  • AutoCAD (Latest Version)
  • SmartPlant Instrumentation (formerly Intergraph InTools)
  • InstruCalc

Primary duties include preparation of drawings and documentation for power distribution, lighting, motor controls, communications, heat tracing, grounding systems, instrumentation plans, circuit schedules and instrument loop drawings. BSEE degree and excellent communication skills required, as well as ability to function in a team environment.
 
Job Number: 1910100476
Job Location: Mount Vernon, IN
Duration: 6 months
Input Date: 03/29/2019
Last Updated: 07/19/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Amy Kloeppinger
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033cCGQAY&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Integration Test Engineer

Description:
Must Be Eligible For a Secret Clearance

Test Engineer - Integration.Test Engineer-Integration requires both Software & Hardware skills:

Software: skilled in 'C' using NI LabWindows/CVI, LabView and Test Stand, and interfacing with test equipment. Assignment will include the design, development, integration, testing, and fielding of software for a test set.

Hardware: skilled in Test Equipment and Interface Test Adapter (ITA) design and interfacing with test equipment. Knowledgeable in 'C' using NI TestStand, LabView and/or LabWindows/CVI development environments desired.
 
Job Number: 46069
Job Location: TX
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 06/04/2019
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Intelligent Manufacturing Expert (Aerospace) - China

Description:
Intelligent Manufacturing Expert

Our client, the manufacturing division of a major Chinese aircraft company, are seeking an Intelligent Manufacturing Expert to provide expert advice to its various manufacturing programs. This is based at the modern facility in Shanghai.

Job Description

·Responsible for digitalizational intelligent manufacturing application planning, AI algorighm development, system testing, debugging, maintaining, technical guidance etc.;

·Analyze the trend of intelligent technology, involving intelligent manufacturing software and hardware solutions;

·Responsible for the implementation of enterprise intelligent manufacturing upgrading and management of the production line equipment life cycle;

·Follow up the project progress in time, lead the team to solve the problems that related to site production line, ensure the project is completed on time;

·Responsible for intelligent manufacturing information management and programing.

Qualifications & Experience

·More than 10 years of relevant major work experience in intelligent manufacturing and automation equipment development;

·Familiar with R&D, production, management process in the aeronautical field;

·Familiar with organizational intelligent manufacturing related to equipmental software, hardware technology and organaitional information management software;

·Proficiently program the equipment control system of intelligent manufacturing;

·Lead organization intelligent manufacturing, experienced in intelligent manufacturing and industry robot are preferred;

·Familiar with information system or software development, programmer who are experienced in programming and software developing are preferred;

·Overseas working experience is preferred.

This position will be on a fixed term employment contract basis, with an initial duration of 2-3 years and extendable beyond this. It comes with a generous salary with additional tax-free allowances for accommodation, transport, travel home and healthcare.
 
Job Number: BHJOB28358_69
Job Location: China
Rate: Negotiable
Duration: 2-3 years
Start Date: July2019 onwards
Input Date: 07/04/2019
Firm Name: STRONGFIELD TECHNOLOGIES USA INC
Attention: Adrian Medhurst
Address: 5000 BIRCH ST STE 3000
City, State: NEWPORT BEACH, CA 92660
Website: www.strongfield.com

J2EE Software Engineer, Parsippany, NJ 07054

Description:
PDS Tech Inc. is seeking Software Engineer-JavaEE, Parsippany, NJ 07054. Contact Elisabeth Laspe for details. 314-669-8020 elaspe@pdstech.com 
6 month Contract with possible extensions.  Must be a US Citizen or Green Card holder to qualify. 

Description:
Needs to be a backend java developer. EJB, J2EE experience is a must. Must know multi-threading for the role. Will need to be aware of the java test they will have to take during the interview phase (2hour test). Must be able to take test in person.

The Software Engineer will work in all phases of the software development lifecycle, including requirement gathering, application design, system development, testing and implementation. The Dovetail Payment Services Hub is built on a 100% Java EE platform supplemented with extensive Dovetail frameworks. The Software Engineer must be capable of producing high quality code, in a fast-paced, deadline-driven environment. This role liaises with project managers, lead developers, business analysts, and may also include some client interaction.
 
•Develop Java code that meets design and architectural requirements and supports system testing.
•Understand the impact of changes across the application.
•Operate effectively, and with a sense of urgency to meet deadlines and escalate issues effectively
•Discuss aspects of the design with architects, team leads and business analysts to check understanding and raise concerns
•Enhance and maintain existing application software, continually providing support for internally developed applications
•Accurately communicate development status on a regular basis to team leads
•Assist the production support team in defect analysis
 
Basic Qualifications for Consideration:
We are looking for an individual who has the extra level of drive to succeed despite obstacles and challenges, and a positive attitude favoring achievement of goals. The successful candidate must be determined to produce software of the highest quality through self-discipline, clear and engaged communication. You will possess a high level of commitment in carrying out the Company’s vision, mission and values.
3 to 5 years’ real-world professional experience in server-side Java development including the Java EE technologies (JDBC, EJB, and JMS), and Structured Framework experience (Struts)
•Working knowledge of XML and related technologies such as JAXP, JAXB, and XPath
•Experience in developing Java EE applications on WebLogic or WebSphere
•Background in relational databases and experience with applications that utilize relational databases
•General knowledge of SQL

•Experience with multidimensional databases and the MDX query language.
•Ability to apply advanced software programming to solve complex business problems.
•Must be detail-oriented, extremely organized, and will have exceptional writing and communication skills to establish relationships and work with all levels internally and externally.
•Demonstrated record developing successful applications that are highly integrated and reliable
•Ability to operate effectively, and with a sense of possibility, in a fast-paced, deadline-driven environment
•Knowledge of the Financial, banking sector, specifically Payments Systems highly preferred
 
Preferred Skills, Experience, and Education:
•BS or MS degree in Computer Science, Computer Engineering or similar.
 
 
Job Number: 1810095552
Job Location: Parsippany, NJ
Duration: 6 months
Input Date: 11/21/2018
Last Updated: 07/19/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Elisabeth Laspe
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002r0JgQAI&URLSource=cjhunter

JAVA Developer-Senior, Orlando FL 32826

Description:
PDS Tech is seeking a JAVA Developer-Senior, Orlando FL 32826 .  Contact Elisabeth Laspe for details.314-669-8020 elaspe@pdstech.com
12  month contract with possible extensions. Must be a US Citizen or Green Card Holder to qualify.

Job Description:

Must have Skills: Knowledge of Open Source frameworks and tools: Jenkins, Spring, Hibernate, Eclipse, Mule, Maven, Drools and others In-depth knowledge of Java (J2SE and J2EE), XML (XSD, XSLT, XPath), HTML, CSS/JavaScript, SQL, and Web Services

•Able to complete task with minimal supervision, the Sr Technical Software Developer provides knowledge and experience to support Technology and governance in software development.
•The Sr. Technical Software Developer is responsible to lead the design efforts for product enhancements as well as for the resolution of complicated architectural software issues related to insurance solutions and is an integral part of CompSuite implementation and base development teams leading the development and establishment of pragmatic, quality-oriented software engineering best practices.
•The Sr. Technical software developer will be a key member of the development team responsible for designing systems and their software components, coding, unit testing, and delivering critically important and or high impact items.
•The role will require working directly with other developers and client-facing personnel.
•The position requires extensive knowledge and experience of both commercial and open source components such as application servers, enterprise service buses, rules engines, component frameworks, messaging libraries, etc and a solid understanding of the Java EE computing platform, UML, design patterns, data modeling and database design.
 
Essential Job Responsibilities:
•Collaborate with a team of professionals in designing, developing and implementing insurance application
•Provide oversight for all software-related issues
•Identifies established development patterns and approaches
•Reviews and compares architectures and designs for various solutions
•Recommends technology for the product road map
•Designs and implements re-usable software components
•Presents technical material to clients
•Mentors more-junior software development personnel
•Completes activities as directed and according to timelines
•Provides accurate estimates for analysis, design and development activities for subsystems
•Develop technical documentation for subsystem in accordance with defined software architecture and applicable project design standards
Autonomously code software from technical documentation
•Create and execute unit tests emphasizing cross-browser compatibility including Edge, Firefox, and Chrome
•Adhere to defined coding standards, UI standards, and other defined quality standards

•Review code and design from other team members and provide constructive feedback
•Adhere to project development processes including documentation, defect tracking, software configuration management, and status reporting
•Participate in and contribute to software architectural design discussions
 
Required Qualifications:
•Bachelor’s degree in relevant field (Computer Science or MIS) or equivalent educational qualification
•Strong experience in designing and developing enterprise applications using Java technologies

•Technical team leadership experience
Knowledge of Open Source frameworks and tools: Jenkins, Spring, Hibernate, Eclipse, Mule, Maven, Drools and others
•Hands-on experience with the following tools: JBoss Application Server, IBM WebSphere Application Server and others
•In-depth knowledge of Java (J2SE and J2EE), XML (XSD, XSLT, XPath), HTML, CSS/JavaScript, SQL, and Web Services
•Understanding of complex multi-user issues, concurrency and transaction management
•Excellent knowledge of application servers (WebSphere, WildFly, Apache) including configuration, monitoring, and tuning
•Excellent oral and written communication skills with both internal and external personnel – able to present designs, and facilitate design discussion
•Knowledge of SDLC (Software Development Life Cycle), development methodologies, development patterns, web-enabled applications and Inversion of Control


Preferred Qualifications:
•Insurance Domain experience – 4+ years preferred
•Development experience – 8+ years preferred
•OO Analysis and Design – 8+ years preferred
•Java and related environments – 8+ years preferred
•Java-related Development, Test and Profiling tools – 8+ years preferred


Pluses/Nice to Have:
•IBM i, SQL Server, and familiarity with Linux
•Experience with Document management systems.
•Demonstrated experience with Enterprise Service Bus (ESB) technologies (Mule experience preferred)
•Proven ability to rapidly deliver prototypes and proof-of-concept work to validate a proposed architectural approach
 
 
 
 
Job Number: 1910102764
Job Location: Orlando, FL
Duration: 12 months
Input Date: 06/05/2019
Last Updated: 07/19/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Elisabeth Laspe
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033jBBQAY&URLSource=cjhunter

Java Software Engineers

Description:
JAVA Software Engineers
Positions can be located at multiple sites:
Oklahoma City, OK 73145 / 73150 / 73135
El Segundo, CA 90245
St. Louis, MO 63042

Secret, TOP Secret AND non-cleared positions, at various skill levels
  • Job responsibilities will address all phases of the software development cycle.
  • Requirements and interface definition.
  • Design and development of state-of-the art software systems for space-based applications.
  • Integration and test.
  • Configuration management and release.
  • Product maintenance.
  • Development of spacecraft system software packages, including command and control systems and mission products.
  • Positions will require the ability to effectively communicate with internal customers, during development and after product release.
  • The candidate will also be expected to manage several parallel tasks as part of a dynamic team of systems and software engineers.
  • Support software project management.
  • Troubleshoot software issues.

Bachelor's degree, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Skills: Java, JavaScript, Oracle, SQL, SQL Server Database, XML, C++
Linux, Windows Operating System, Object Oriented development, Web Application

Contact Sana Khan at 314-665-2124 or skhan@pdstech.com to discuss these opportunities.
 
 
Job Number: 1810088568
Job Location: OK City, OK
Duration: 12 months
Input Date: 09/11/2018
Last Updated: 07/19/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Elisabeth Laspe
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mcWlAAI&URLSource=cjhunter

Jr. Avionics Systems Engineer

Description:
General Summary:
The Avionics System Engineer will be responsible for the design, development, and integration of the assigned avionics systems for the aircraft.


Duties and Responsibilities:
• Define, plan, and develop complex systems level requirements to support the avionic systems.
• Perform systems level integration activities for aircraft avionic systems including: Control and Display Systems; Navigations Systems; Communication Systems; Surveillance Systems; and Cabin Management Systems
• Interface with suppliers to ensure technical requirements are met to support aircraft development need dates
• Provide technical assistance to production and customer service departments for support of system technical inquires and issue resolution
• Perform system evaluation and analysis to verify the system design compliance with functional requirements
• Coordinate with cross-functional team members to complete assignments/projects as defined and on schedule
• Develop targeted system level enhancements to address customer feedback and product improvement initiatives
• Conduct system lab testing and aircraft functional testing
• Prepare presentations on avionics system design/development status
• Support system analyses for avionic systems
Qualifications


Education, Work Experience, Certification and/or Licensure:
• Bachelors’ degree in Engineering from a four year college or university; preferably in Electrical/Electronics Engineering or Aerospace Engineering
• Minimum of 6 years to a maximum of 20 years’ experience working with integrated aircraft avionic systems in the areas of design engineering, system analysis, and system test


Knowledge, Skills and Abilities:
• Working knowledge of design requirements of 14CFRPart 23
• Proficiency in writing technical documentation and reports involving test data and analysis
• Familiarity with avionics/electrical test laboratories and lab equipment
• Working knowledge of System qualification requirements including DO-160E/F for environmental, DO-178B for software, and DO-254 for complex electronic hardware
• Proficiency in Microsoft Office suite (Word, Excel, Project, PowerPoint is required)
• Proficiency in requirements management tools such as DOORS
• Proficiency in PLM Tools such as TeamCenter and SAP
• Ability to handle complex work assignments
• Ability to work independently and within a multi-functional team environment




The Structures Company, LLC is an AA/EOE.
 
Job Number: 296
Job Location: NC
Rate: $50/Hr.
Per Diem: Yes
Overtime: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 04/18/2019
Last Updated: 07/19/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Loads & Dynamics Engineer

Description:
Loads and Dynamics Engineer
• Support loads event simulation model development and validation of loads criteria for suborbital space missions
• Support pre-flight preparation including review of test limitations, flight test plans and procedures, flight readiness reviews, mission control room support, and post flight analysis
• Works with other engineering groups to ensure proper application of design and loads requirements
• Develop airframe design loads, component loads, fatigue spectra, and environmental specification
• Supports entry into commercial service by ensuring that regulatory and internal company requirements related to loads are met
• Develop standardized analysis and reporting tools
• Perform model updates from data collected during vehicle or component testing and data created with analytical tools
• Develop and maintain loads databases for use in analysis of WK2 and SS2 during all flight phases
• Develop and substantiate rational loads criteria and requirements for unique vehicles with unconventional configurations
• Graduate degree in Aerospace Engineering, and/or equivalent, with minimum of 5 years of experience in external loads and dynamics development
• Experiences in wind-tunnel and flight test aerodynamic and loads model validation
• Experience with full aircraft analysis – transonic required, supersonic and launch vehicle desirable
• Test plan development and data analysis experience a strong plus
• Experience in the conduct of flight test, including familiarity with standard flight test practices and safety processes strong plus.
• Working knowledge of aircraft and space systems and familiarity with relevant aerospace standards (FAA, FAA‐AST etc.)
• Advanced skills with Simulink, MATLAB, Fortran, C, C++, and software development best practices.
• CATIA V5 and NASTRAN experiences preferred.

The Structures Company is an AA/EOE.
 
Job Number: 260
Job Location: CA
Rate: DOE
Per Diem: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 05/21/2019
Last Updated: 07/03/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Logistics Management Analyst

Description:
Location: Fort Benning, FL
Rate: $30.00/HR
Duration: 4 month contract

****MUST be a U.S. Citizen****
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
- Controls the efficient flow of goods, services, and information between points of origin through customer placement in order to meet customer requirements.
- Ensures that customer service and time objectives are achieved within existing financial constraints in order to meet marketing and financial objectives.
- Ensures the execution and continuous improvement of standard logistics processes, such as the replenishment system, data interchange systems, demand management, electronic data systems administration and related functions.
- Builds relationships with strategic customers through logistics initiatives. Integrates learning from customers, competitors, operating entities, distribution, transportation, customer service, other industries, industry groups, and professional training to continuously improve competitive position.


Capabilities Analyst Support:
- Display expert knowledge of Project programs in the preparation of various staff action requirements to be used in presentations, staff planning/working groups and for information papers.
- Develop general knowledge of emerging software systems such as Socialcast, Trello, Defense Ready, or Slack in the event that the organization desires to utilize new systems for project management, planning, or data management processes.
- Work in a small team to focus on small and long term projects, facilitate project management by others, and advise the organization on best practices/solutions to ongoing projects/planning efforts.
- Maintain continuity on projects, developing organizational understanding through graphics, data management, and other forms of communication.
- Communicate and develop relationships with outside organizations to pollinate ideas inside and out of the SOF community.
- Design and resource efforts and solutions through military processes as required.


Education:
- Level 3: BS+6-10 YRS or MS+4-8 YRS
 
Job Number: 11037
Job Location: Fort Benning, GA
Rate: $30.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 4 mos
Input Date: 06/03/2019
Last Updated: 06/17/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Logistics Management Analyst - Clearance GA

Description:
1635-1
Logistics Management Analyst
Work Location: Fort Benning, GA
Status: Open

Qty: 1
Desired Start Date: 6/17/2019
End Date: 10/21/2019

Job Description:
Controls the efficient flow of goods, services, and information between points of origin through customer placement in order to meet customer requirements. Ensures that customer service and time objectives are achieved within existing financial constraints in order to meet marketing and financial objectives. Ensures the execution and continuous improvement of standard logistics processes, such as the replenishment system, data interchange systems, demand management, electronic data systems administration and related functions. Builds relationships with strategic customers through logistics initiatives. Integrates learning from customers, competitors, operating entities, distribution, transportation, customer service, other industries, industry groups, and professional training to continuously improve competitive position.
Capabilities Analyst Support
Display expert knowledge of Project programs in the preparation of various staff action requirements to be used in presentations, staff planning/working groups and for information papers.
Develop general knowledge of emerging software systems such as Socialcast, Trello, Defense Ready, or Slack in the event that the organization desires to utilize new systems for project management, planning, or data management processes.
Work in a small team to focus on small and long term projects, facilitate project management by others, and advise the organization on best practices/solutions to ongoing projects/planning efforts.
Maintain continuity on projects, developing organizational understanding through graphics, data management, and other forms of communication.
Communicate and develop relationships with outside organizations to pollinate ideas inside and out of the SOF community.
Design and resource efforts and solutions through military processes as required.

Level: Level 3: BS+6-10 YRS or MS+4-8 YRS
Pay Rate: $18.00 - $47.50 Hourly
 
Job Number: JE-1635-1S
Job Location: Fort Bennings, GA
Rate: 47.50/hr max
Duration: 4 months +
Input Date: 05/30/2019
Last Updated: 06/20/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Logistics Management Analyst - Clearance KY

Description:
165154
1591-1 Logistics Management Analyst
Work Location: Lexington, KY
Status: Open

Qty: 1
Desired Start Date: 6/10/2019
End Date: 11/11/2019

Job Description:
Controls the efficient flow of goods, services, and information between points of origin through customer placement in order to meet customer requirements. Ensures that customer service and time objectives are achieved within existing financial constraints in order to meet marketing and financial objectives. Ensures the execution and continuous improvement of standard logistics processes, such as the replenishment system, data interchange systems, demand management, electronic data systems administration and related functions. Builds relationships with strategic customers through logistics initiatives. Integrates learning from customers, competitors, operating entities, distribution, transportation, customer service, other industries, industry groups, and professional training to continuously improve competitive position.

Level: Level 2: BS+3-5 YRS or MS+0-3 YRS
Pay Rate: $16.20 - $42.00 Hourly
Soft Skills Leadership Skills No 1 2 - 4 Years
Software Skills MS Excel No 1 4 - 6 Years
Technical Skills Data Entry No 1 1 - 2 Years
 
Job Number: JE-1591-1S
Job Location: Lexington, KY
Rate: 42/hr max
Duration: 5 months
Input Date: 06/07/2019
Last Updated: 06/21/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Logistics Representative

Description:
PDS Tech, Inc. is seeking a Logistics Representative in Tinker AFB, OK.

Summary:

  • The selected candidate will be required to assist with researching, identifying and resolving customer supply support system inventory discrepancies.
  • Will collaborate with company organizations to identify and resolve system issues, and monitor logistics system performance.
  • Will prepare required company reports and perform any additional tasks identified.
  • Required to receive, ship, transport, store and issue classified material as per related procedures and processes.
  • Participate in the receiving, inspection, stocking, and disposition of all hardware delivered to the OKC warehouse.
  • Candidate must be able to perform a one-person lift of 35 lbs. and a two-person lift of 50 lbs., have a strong attention to detail with First Time Quality a priority, and full understanding of how to manage inventory.
  • Current Secret Security Clearance, a plus.
  • Candidate must be willing to work 1st, 2nd, and/or 3rd shift, weekends and overtime.

Prerequisites:
  • Bachelor's degree preferred.
    CategoryNameRequiredLevel 
    Areas of ExpertiseLogisticsNoAdvanced  
    Areas of ExpertiseWarehouseNoIntermediate  
    Soft SkillsCustomer ServiceNoAdvanced  
    Software SkillsMS OfficeNoIntermediate  
    Software SkillsMS OutlookNoAdvanced  
    Technical SkillsInventory ControlNoIntermediate  
    Technical SkillsInventory managementNoAdvanced


 
Job Number: 1910102815
Job Location: OK City, OK
Duration: 12 months
Input Date: 06/06/2019
Last Updated: 07/19/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Shannon White
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Email: cecjnrt@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033jJqQAI&URLSource=cjhunter

Logistics Representative

Description:
PDS Tech, Inc. is seeking a Logistics Representative in Tinker AFB, OK.

Summary:

  • The selected candidate will be required to assist with researching, identifying and resolving customer supply support system inventory discrepancies.
  • Will collaborate with company organizations to identify and resolve system issues, and monitor logistics system performance.
  • Will prepare required company reports and perform any additional tasks identified.
  • Required to receive, ship, transport, store and issue classified material as per related procedures and processes.
  • Participate in the receiving, inspection, stocking, and disposition of all hardware delivered to the OKC warehouse.
  • Candidate must be able to perform a one-person lift of 35 lbs. and a two-person lift of 50 lbs., have a strong attention to detail with First Time Quality a priority, and full understanding of how to manage inventory.
  • Current Secret Security Clearance, a plus.
  • Candidate must be willing to work 1st, 2nd, and/or 3rd shift, weekends and overtime.

Prerequisites:
  • Bachelor's degree preferred.
    CategoryNameRequiredLevel 
    Areas of ExpertiseLogisticsNoAdvanced  
    Areas of ExpertiseWarehouseNoIntermediate  
    Soft SkillsCustomer ServiceNoAdvanced  
    Software SkillsMS OfficeNoIntermediate  
    Software SkillsMS OutlookNoAdvanced  
    Technical SkillsInventory ControlNoIntermediate  
    Technical SkillsInventory managementNoAdvanced


 
Job Number: 1910102814
Job Location: OK City, OK
Duration: 12 months
Input Date: 06/05/2019
Last Updated: 07/19/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Shannon White
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Email: cecjnrt@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033jJgQAI&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Engineer

Description:
Description:
Knowledge of air vehicle systems, systems integration, engineering design, the drawing release process, and subsystems/component qualification
Working knowledge and experience integrating various mechanical systems into a composite aircraft.
Familiarity with composite fabrication processes
Review and provide engineering technical disposition of non-conformance notifications related to metallic and composite parts/assemblies
Skilled in “equivalent strength” principles
Participation in product Corrective Action Board (CAR) reviews
Willingness to support weekend shift operations
Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
Is consulted extensively by associates and others as a recognized authority within the field
Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
Has an approach to problem solving, balances technical product cost, and scheduling
Works without appreciable direction; work is reviewed from a long-range perspective for desired results
Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product


Qualifications:
Bachelor's Degree in engineering, Mechanical, Aerospace, or similar engineering discipline or technical related curriculum applicable to the respective job position required. 10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with a bachelors degree. Experience credit considered for related advanced degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.
At least 5 years of relevant industry experience
Experience with CATIA V5 strongly preferred. SOLIDWORKS or equivalent will be considered in lieu of CATIA.
Experienced design (broad based aircraft experience) with knowledge of design manufacturing tolerances for production of components using GD&T
Experience with Product Lifecycle Management tools (PLM software), Requirements management tools and configuration management
Excellent verbal and written communication, excellent computer skills including Microsoft Word, Excel, PowerPoint, and Matlab
Knowledge and experience with AS9100 a plus
Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, DO-160, military (MIL-STD-810) or NASA are highly desired
Experience with manufacturing based ERP systems a plus
Strong team player and ability to work independently with excellent organizational and problem-solving skills
Composite and metal design experience preferred
Understanding of MRB requirements & procedures
Extensive working knowledge of engineering drawings / requirements
NDT/Visual non-conformance disposition expertise
Experience with control & segregation requirements for non-conforming material
Familiarization with records accuracy & completeness (including data codes)
Ability to facilitate inadequate cause & corrective action resolutions
Familiarization with rework vs accept disposition risk assessments
Familiarization with final dispositions & re-submit codes
Experience should include creation of engineering dispositions for non-conformances for pressurized and non
pressurized metallic and non-metallic structures (fuselage, wing, empennage)
Experience should be in a production and/or schedule-driven environment
Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment
Strong written/verbal communication and interpersonal skills
Typically a 9-10 hour work day, with some scheduled weekend support required
Advanced degree in engineering, or related curriculum preferred
The level of technical skill and abilities appropriate for this grade will be established by each discipline

The Structures Company is an AA/EOE.
 
Job Number: 309
Job Location: CA
Rate: $65-$70/Hr.
Per Diem: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 06/11/2019
Last Updated: 06/18/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Manufacturing Engineer

Description:
Manufacturing Engineer

Lexington, KY
$27.50/hr
6 month W2 contract
First Shift
*MUST HAVE AN ACTIVE SECRET CLEARANCE*

Job Description:
Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling. . Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance. Adapts machine or equipment design to factory and production conditions.

Responsibilities include close coordination and collaboration with the Product Focus Teams, Factory Material Flow, Tool Services, and Facilities in developing and implementing production readiness in each of the component and assembly areas. May incorporate inspection and test requirements into the production plan. Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality. Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques. Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensures processes and procedures are in compliance with regulations.

Basic Qualifications :
•Knowledge of engineering drawing interpretation and tolerances.
•Demonstrated organizational skills
•Proficient with Microsoft Office suite
•Producibility for manufacturing experience.
•Understanding of configuration control principles
•Experience in writing basic manufacturing planning work instructions
Bachelors degree required

Desired skills:
•Experience with material handling, work flow, and process development of complex assemblies, mechanical details, tooling and mechanical system integration
•Dual discipline engineering experience: mechanical and electrical backgrounds
•Lean six sigma training, i.e. green belt, or black belt certified
•Tool fabrication and assembly experience
•Experience with use of Teamcenter Engineering software package
•Bachelor’s degree from an accredited college in Mechanical, or Electrical Engineering, or equivalent experience/combined education,