Job Search Results

123 listings were found that matched your search words: Keywords: CAD ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2024/03/28 Thursday 10:09AM Pacific Time by ContractJobHunter. )

Listings 1 - 123

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer / MRB F-16 - no clearance SC

Description:
167210 Job Title: Aeronautical Engineer

Work Site Address: Greenville, SC 29605
Job Number: 2918-1
Max Pay Rate: $44.00/hr
Start Date: 1/27/2020
End Date: 1/29/2021
Position Type: Contract

Job Summary:
Looking for engineer to be part of the new Production of the F-16 and other project opportunities.

Aeronautical Engineer required to assist with the Material Review Board (MRB) to support detail fabrication, sub-assembly, component assembly, and mate through delivery operations.

Primary duties of this assignment include technical solution development and coordination, and preparation and release of dispositions related to discrepancies on high performance aircraft detail parts, assemblies, installations and finishes.
Support Planning reviews for F-16 Production through all phases of the F-16 Production.

Primary duties of this job will support the Planning tasks as the production planning is created, support the on-site MRB engineers to include anomaly investigation, technical solution development and coordination with the MRB engineer for preparation and release of dispositions related to discrepancies on high performance aircraft detail parts, assemblies, installations and finishes.

Additionally, this position requires skills as an Airframe Design Engineer to use their technical expertise to design aircraft structure and subsystems installations. The candidate will have a complete understanding and wide application of technical principles, theories and concepts in the field of aircraft structure design. The candidate will be responsible for layout and detail modeling of aircraft structure, structural assemblies, layouts and detail drawings using CATIA V5 and CADDAM, participating in trade studies, creating and maintaining interface control drawings, and coordination with Integrated Product Teams.

The engineering candidate will be required to coordinate across many functional areas and Aero sites, including Stress/DADT, Quality Assurance, Planning, Functional Test, Structures and Systems Design groups, Safety, Materials and Processes and Flight Sciences. Chosen candidate will work closely with the production floor, support process improvements, incorporate best practices into daily operations, and coordinate lessons learned and corrective action.

Qualifications and Education Requirements
Minimum of 6 years’ experience with aircraft design, assembly, production or repair is required.

Must possess experience with making timely decisions and possess the ability to understand and manage financial impacts created by specific decisions.
Candidate must value and support diversity.
Bachelor of Science Degree in Mechanical or Aeronautical Engineering field is required.

Skills: Category Name Required Importance Experience
Areas of Expertise CATIA No 4
Areas of Expertise F-16 No 2
Technical Skills Ability to Read Engineering Drawings Yes 1
Technical Skills Engineering Design Principles Yes 3
Technical Skills Configuration Management No 5

Qty 2 position
 
Job Number: JEG-2918-1
Job Location: Greenville, SC
Rate: 44/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer - Liaison

Description:
A Electrical Design Engineer / Liaison job is currently available through Belcan in Oshkosh, WI. This job will work as a Contractor supporting our customer at their facility. You will be responsible for performing technical work along with coordinating, communicating, delivery, and project management of outsourced work between the customer and off-site Belcan Design Center teams. To be considered for this position, you must have actual work experience involving CAD tools and electrical harness and cable design. A Bachelor's Degree in Mechanical or Electrical Engineering is strongly preferred.

Electrical Design Engineer / Liaison job duties:
* Work hands on with customers to identify work and deliverables, coordinate and project manage work to and from the Belcan Design Centers, deliver and present results, etc.
* Update and create 3D and 2D models to government standards.
* Make changes to ensure compliance with established design standards and practices.
* Complete change requests, conversions, and make model and assembly changes within proper CAD tools and parts software.
* Resolves client questions or field problems concerning the design package and contract deliverables.
* Conduct different design procedures, such as 2D and 3D modeling, simple modifications of existing production components.

Qualifications:
* Legal authorization to work in the U.S. is required.
* A Bachelor's in Mechanical or Electrical Engineering.
* Experience with design project management and direct customer interaction.
* Three to five years of professional design experience with electrical harness and cable design.
* Experience with 3D CAD software (Creo Schematic or Pro Diagram / Pro Harness is preferred.
* Experience with Windchill is preferred.
* Familiarity with an electrical wiring design program, familiarity with CAD.
* Understand electrical system design (wire sizing, splicing, bend radii, component mounting, connectors, CAN bus systems).
* Ability to problem-solve and multitask, high attention to detail, work well in team environment, and communicate to and from the team.

If you are interested in this job in Oshkosh, WI, please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.

Belcan is an equal opportunity employer. EOE/M/F/D/V

Build a challenging and rewarding career with an industry leader!

http://belcan.com/

 
Job Number: 297991
Job Location: Oshkosh, WI
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Firm Name: BELCAN TECHSERVICES
Attention: AnthonyDonofrio
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer / Instrumentation Engineer - Clearance CA

Description:
167083 Job Title: Electrical Engineer / Instrumentation Engineer

Work Site Address: Palmdale, CA 93599
Job Number: 2678-1
Max Pay Rate: $100.00/hr
Start Date: 11/22/2019
End Date: 2/9/2021
Position Type: Contract

Job Summary:
Responsible for supporting multiple programs on technical and schedule issues with respect to aircraft instrumentation.

Will be responsible for the design, installation, and operational support activities for data acquisition. This includes designing instrumentation systems, releasing engineering documents, work instructions, supporting airworthiness documentation, monitoring fabrication activities, and supporting aircraft checkout and flight operations. The applicant will be the engineering liaison for flight test and instrumentation modification activities.

The candidate should be familiar with integrating various sensors into a data acquisition system. The position will be responsible for ensuring recorded data is correct.

This position may require travel and odd, weekend or overtime shift work on an as-necessary basis.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS
Basic Qualifications
• Bachelor’s degree in Electrical/Electronics or Computer Engineering or related discipline.
• Experience developing instrumentation systems and sensor integration methods used on multiple aircraft
• Experience developing data acquisition systems for air vehicles

Experience with the following:
- Microsoft Office
- Electronics and electronics troubleshooting techniques and tools, including multi-meters, oscilloscopes, logic analyzers, signal generators, spectrum analyzers, and/or other common lab test equipment

Desired skills
• Using various CAD programs such as Catia, Autocad, etc.
• Using general test equipment such as oscilloscopes and spectrum analyzers.
• Understanding of IRIG 106
• Avionics bus protocols including Mil-Std-1553, ARINC-429, IEEE 1394, Ethernet and Fiber Channel
• GPS and IRIG time standards
• Video protocols and compression

The applicant must have excellent organizational and communications skills
• Applicant should have knowledge of Systems Engineering practices and concepts
• Experience with or knowledge of calibration methods for test and evaluation of both mechanical measurements and electronic sensors
• Skilled in the conversion of digital data sets to engineering units and interpretation of data for validity and error determination
• Familiarity with military aircraft technical data, maintenance practices, flight operations, military stores and munitions is a plus

Qty 2 positions
 
Job Number: JE-2678-1S
Job Location: Palmdale, CA
Rate: 100/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Wire Harness Engineer

Description:
*This is a full time, 1 year contract position located in York, PA*

*Alternate locations available to work from, Minneapolis or San Jose*

*Per diem split is available for out of the area applicants*



We are seeking a contract Electrical Engineer specializing in vehicle electronics and wire harness designing. We are working on optimizing the design the wiring harnesses and cable assemblies which will integrated into military ground vehicles, such as tanks and armored personnel carriers.



Daily duties will consist of specifying/design of components from requirements and work on through modeling, simulation and analysis or test that requirements are met. Will work on creating engineering documentation (specs, ICDs, design documents, and technical/test reports) and complete technical data packages. Handle cost estimating, scheduling assigned electrical design projects; work on ECOs and change proposals as well as monitoring to ensure manufacturing, and delivery of components schedules are met. Applicant will assist drafters / designers in creating clear and releasable documents.



Required:
*3 years’ experience designing electrical & wire harnesses systems for military vehicles.
*Working knowledge of Visio Technical, Pro-E, Pro-Cable and/or CADDS 5
*Understanding of military electrical connectors and cabling specs such as SAEJ1939 CANBus/CANalyzer.

*Familiar with C4ISR equipment and vision enhancement systems including cameras and displays.

*Working knowledge of vehicle positioning systems.

*Experience using electrical test equipment including oscilloscopes, meters, power supplies.
*Knowledge of MIL-STD 1553,MIL-STD 100

*4 year degree in Engineering





Pluses:
*Experience integrating military communication/antenna systems including BFT, SINCGARS, DAGR, CREW2
 
Job Number: 314
Job Location: Sterling Hts, MI
Rate: DOE
Per Diem: yes split
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FPGA Design Engineer - SECRET CLEARANCE

Description:
Job Description:

• Perform FPGA Design: Architecture, Algorithms, VHDL code generation, VHDL simulation, Synthesis and Device Implementation & Constraints, System Integration and Test.

• Design Low/Med/High Complexity Field Programmable Gate Array (FPGA) starting from System De-composition and completing through System Integration and Test



Qualifications:

• BSEE, Computer Engineering. or other related technical field of study.

• 9+ years of relevant FPGA design experience including:o Knowledge of High Complexity Digital Design Techniques and Devices.o Hardware debugging skills & experienced in operation of Signal Generator, Logic Analyzer, Spectrum Analyzer, Digital Oscilloscope and Embedded FPGA Debugging tools



Preferred Additional Skills

• MSEE

• General: Microsoft Office, DOORs (Requirement Specification and Tractability), Revision Control (GIT, CVS, PTC Integrity, etc.)

• FPGA: Mentor Graphics HDL Designer, Mentor Graphics ModelSim/Questa, Synopsis Synplicity, Xilinx Client, Xilinx EDK XPS SDK, Xilinx Vivado, Altera Quartus, System Verilog, System C, UVM, OVM, VMM.

• Circuit Card: Cadence Allegro for Schematic Entry and to support PWB Layout/Route.

• Other: SoC FPGA bring-up

• U.S. granted government security clearance.




Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
 
Job Number: 19-43852
Job Location: Clifton, NJ
Rate: 95.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2020-10-27 00:00:00.0
Start Date: 2019-10-28 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Kevin Lord
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Hydraulic Design Engineer - Liaison

Description:
A Hydraulic Design Engineer / Liaison job is currently available through Belcan in Oshkosh, WI. This job will work as a Contractor supporting our customer at their facility. To be considered for this position, you must have actual work experience involving Creo and hydraulics or airbrake systems design and a Bachelor's Degree in Mechanical or Electrical Engineering. This job will be responsible for technical work along with liaison and lead duties that involve: coordinating, communicating, delivery, and project management between the customer and Belcan Design Center teams.

Hydraulic Design Engineer / Liaison job duties:
* Work hands on with customers to identify work and deliverables, coordinate and project manage work to and from the Belcan Design Centers, deliver and present results, etc.
* Update and create 3D and 2D models to government standards.
* Make changes to ensure compliance with established design standards and practices.
* Complete change requests, conversions, and make model and assembly changes within proper CAD tools and parts software.
* Resolves client questions or field problems concerning the design package and contract deliverables.
* Conduct different design procedures, such as 2D and 3D modeling, simple modifications of existing production components.

Qualifications:
* Legal authorization to work in the U.S. is required.
* A BSME or related degree involving electrical or mechanical design.
* Three to five years of professional design experience with hydraulics, fittings, airbrakes, fluid power, high-pressure gas suspension systems, etc.
* Experience with design project management and direct customer interaction.
* Experience with Creo or Pro Engineer CAD software.
* Experience with Creo Piping.
* Experience with Windchill is preferred.
* Ability to work in a team environment and take direction, as well as, work independently and be a self-starter.
* Ability to work in a fast-paced environment while multi-tasking and maintaining strong interpersonal and communication skills.

If you are interested in this job in Oshkosh, WI, please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.

Belcan is an equal opportunity employer. EOE/M/F/D/V

Build a challenging and rewarding career with an industry leader!

http://belcan.com/

 
Job Number: 297938
Job Location: Oshkosh, WI
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Firm Name: BELCAN TECHSERVICES
Attention: DavidRiley
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Instrumentation Engineer

Description:
Instrumentation Engineer

Palmdale, CA
$100/hr
15 month W2 contract
First Shift
*MUST BE A U.S. CITIZEN*

Description:
Instrumentation Engineer
The selected candidate will be responsible for supporting multiple programs on technical and schedule issues with respect to aircraft instrumentation.

The candidate will be responsible for the design, installation, and operational support activities for data acquisition. This includes designing instrumentation systems, releasing engineering documents, work instructions, supporting airworthiness documentation, monitoring fabrication activities, and supporting aircraft checkout and flight operations. The applicant will be the engineering liaison for flight test and instrumentation modification activities.

The candidate should be familiar with integrating various sensors into a data acquisition system. The position will be responsible for ensuring recorded data is correct.

This position may require travel and odd, weekend or overtime shift work on an as-necessary basis.

Must be a US Citizen. Applicant selected will be subject to a government security investigation and must meet eligibility requirements for access to classified information. For this particular position, an active Secret security clearance.

Basic Qualifications
* Bachelor's degree in Electrical/Electronics or Computer Engineering or related discipline.
* Experience developing instrumentation systems and sensor integration methods used on multiple aircraft
* Experience developing data acquisition systems for air vehicles

Experience with the following:
- Microsoft Office
- Electronics and electronics troubleshooting techniques and tools, including multi-meters, oscilloscopes, logic analyzers, signal generators, spectrum analyzers, and/or other common lab test equipment

Desired skills
* Using various CAD programs such as Catia, Autocad, etc.
* Using general test equipment such as oscilloscopes and spectrum analyzers.
* Understanding of IRIG 106
* Avionics bus protocols including Mil-Std-1553, ARINC-429, IEEE 1394, Ethernet and Fiber Channel
* GPS and IRIG time standards
* Video protocols and compression

The applicant must have excellent organizational and communications skills
* Applicant should have knowledge of Systems Engineering practices and concepts
* Experience with or knowledge of calibration methods for test and evaluation of both mechanical measurements and electronic sensors
* Skilled in the conversion of digital data sets to engineering units and interpretation of data for validity and error determination
* Familiarity with military aircraft technical data, maintenance practices, flight operations, military stores and munitions is a plus
 
Job Number: 11930
Job Location: Palmdale, CA
Rate: 100.00
Per Diem: Split Possible
Overtime: Possible
Duration: 15 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.



Manufacturing Engineer  perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform producibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Manufacturing Engineer ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Manufacturing Engineer have proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.

Education and Experience Requirements:

Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer / CREO ANSYS GD&T - NJ

Description:
167325 Job Title: Mechanical Engineer

Work Site Address: Moorestown, NJ 08057
Job Number: 2989-1
Max Pay Rate: $45.00/hr
Start Date: 1/23/2020
End Date: 12/28/2020
Position Type: Contract


Job Summary:
Seeking Mechanical Engineers to work as part of an engineering team to develop radar system hardware including phased array antennas and their subassemblies; cabinets and their subassemblies (digital processing, power conversion, receiver/exciter). Engineers will interface with Systems, Electrical Engineers, Drafting and Operations personnel in the development of detailed packaging designs and assembly strategies. Work will be performed in our Moorestown, NJ location.

• Performing mechanical design, testing, production support or design analysis
• Performing finite element analysis
• Prepare and release of engineering specifications, parts lists and drawings
• Work with component technology and configuration management personnel
• Documentation and reporting of schedule, financial and technical progress on all task

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
Qualifications
• BS in Mechanical Engineering
• 2+ years of experience
• Proficiency with CAD software
• Familiarity with Pro/Engineer CREO and ANSYS Workbench
• Experience with structural, fluid mechanics and heat transfer analysis techniques
• Knowledge of manufacturing methods and metal part fabrication techniques
• Knowledge of geometric tolerancing, military standards and drafting standards.
• Experience with developing drawings and parts lists (PL’s), Enterprise Product Data Management (EPDM), change request (CR) generation.
• Experience with environmental qualification testing
• Experience designing and packaging of Commercial off the shelf (COTS) equipment in isolated cabinets for naval applications.
• Excellent verbal and written communication skills

Preferred Skills
Skills: Category Name Required Importance Experience
Areas of Expertise 3D Models Yes 1 2 - 4 Years
Areas of Expertise Computer Aided Design (CAD) Yes 1 2 - 4 Years
Areas of Expertise Mechanical Yes 1 2 - 4 Years
Areas of Expertise Mechanical and Electrical Systems Yes 1 2 - 4 Years
Technical Skills Geometric Dimensioning and Tolerancing (GD&T) Yes 1 2 - 4 Years
Technical Skills Ansys No 1 2 - 4 Years

Qty 5 positions

Position is an EXEMPT position. Candidates must have all required skills listed clearly in resume
 
Job Number: LMRMS-2989-1ATO
Job Location: Moorestown, NJ
Rate: 45/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Manufacturing Engineer

Description:
Mechanical Manufacturing Engineer

Windsor Locks, CT
$36.50/hr
11 months W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
This position will be responsible for determining mechanical manufacturing methods for (SLS) hardware and ensuring that the processes are available. Candidate will create manufacturing assembly documentation, concepts tools, provides technical assistance, in order to assemble high quality, high engineered hardware for us in space applications. Candidate must ensure processes and procedures comply with all applicable Environmental, Health and Safety requirements as well as all the applicable quality requirements. Must be able to perform cost estimates, work to schedules, and write procedures and policies. Must be able to review drawings and concepts and resolve producibility concerns. Candidate must provide technical support to the manufacturing facility as well as to the external suppliers. Will support failure investigations, determine root cause of failure, and implement corrective actions and disposition of non-conforming hardware, all in support of continuous improvement initiatives. Must be able work well in an integrated product development/ design environment. Candidate will present to senior management on various topics, be involved with, and implement additional initiatives such as ACE, Process Certification, Manufacturing Process Reviews, Lean Manufacturing and EH&S projects. Candidate must possess a positive attitude and be able communicate well with staff, IPD teams & management.
The job involves working on the manufacture of complex mechanical systems, manufacturing of components such as, heat exchangers, pumps, fans, accumulators and other hardware related with life support systems.

Education / Certifications
* Bachelors of Science in Engineering or Technology, MBA or an advanced Engineering degree is desired.

Experience/Qualifications
* Candidate must have 5-7+ years of experience working on the manufacture of complex mechanical systems. Desired experience should include working on the manufacturing of components such as, heat exchangers, pumps, fans, & accumulators.
* Candidate must have working knowledge of Microsoft Windows environment and experience in using any type of publishing software. Familiarity with a modeling and/or design package such as ProE, Creo, or CAD is desired. Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing, is desirable. Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable. Experience with a MRP (Manufacturing Resource Planning) system is desirable.
* US Citizen is required
 
Job Number: 11812
Job Location: Windsor Locks, CT
Rate: 36.50
Per Diem: No
Overtime: Possible
Duration: 11 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Manufacturing Engineer

Description:
Mechanical Manufacturing Engineer

Windsor Locks, CT
$36.50/hr
1 year W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
This position will be responsible for determining mechanical manufacturing methods for (SLS) hardware and ensuring that the processes are available. Candidate will create manufacturing assembly documentation, concepts tools, provides technical assistance, in order to assemble high quality, high engineered hardware for us in space applications. Candidate must ensure processes and procedures comply with all applicable Environmental, Health and Safety requirements as well as all the applicable quality requirements. Must be able to perform cost estimates, work to schedules, and write procedures and policies. Must be able to review drawings and concepts and resolve producibility concerns. Candidate must provide technical support to the manufacturing facility as well as to the external suppliers. Will support failure investigations, determine root cause of failure, and implement corrective actions and disposition of non-conforming hardware, all in support of continuous improvement initiatives. Must be able work well in an integrated product development/ design environment. Candidate will present to senior management on various topics, be involved with, and implement additional initiatives such as ACE, Process Certification, Manufacturing Process Reviews, Lean Manufacturing and EH&S projects. Candidate must possess a positive attitude and be able communicate well with staff, IPD teams & management.
The job involves working on the manufacture of complex mechanical systems, manufacturing of components such as, heat exchangers, pumps, fans, accumulators and other hardware related with life support systems.

Education / Certifications
* Bachelors of Science in Engineering or Technology, MBA or an advanced Engineering degree is desired.

Experience/Qualifications
* Candidate must have 5-7+ years of experience working on the manufacture of complex mechanical systems. Desired experience should include working on the manufacturing of components such as, heat exchangers, pumps, fans, & accumulators.
* Candidate must have working knowledge of Microsoft Windows environment and experience in using any type of publishing software. Familiarity with a modeling and/or design package such as ProE, Creo, or CAD is desired. Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing, is desirable. Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable. Experience with a MRP (Manufacturing Resource Planning) system is desirable.
* US Citizen is required
 
Job Number: 11811
Job Location: Windsor Locks, CT
Rate: 36.50
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Metrology Engineer II

Description:
Position Purpose:
Under minimal supervision, prepare, conduct, and evaluate for the implementation, programming and support of metrology equipment in tooling, program development and production. Assist with the improvements and problem solving for design and manufacturing issues related to tooling, material fabrication and assembly methods.

Unique Skills:
• Interpret & consolidate aircraft engineering, tooling designs and production requirements, to develop optimized measurement plans and processes.
• Under minimal supervision, develop programing for all measurement equipment that will be used in the development, manufacture and support of aircraft.
• Collaborate with engineering, tooling, manufacturing engineering and operations to determine optimal manufacturing procedures.
• Assist in developing and documenting standards for the handling and utilization of metrology equipment.
• Create standardized inspection reports through the utilization of Metrologic software.
• Study and optimize equipment performance for increased capacity and equipment efficiency.
• Interact and collaborate with equipment vendors on warranty repairs, necessary improvements and upgrades.
• Set up and utilize precision measuring tools; validates measurement results for accuracy and repeatability.
• Provide and/or contribute to the documentation of new or recent processes involving metrology techniques or equipment.
• Coordinate the implementation of projects between multiple organizations.
• Support all Safety, Sustainability and Ergonomic Initiatives.

Education and Experience Requirements:
• Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen (18) months of Metrology Engineering, Manufacturing Engineering, Automation Engineering or related technical experience.

Other Requirements:
• Extensive knowledge of metrology equipment, software and current measurement techniques.
• Knowledge 3D CAD/CATIA modeling and an understanding of GD&T.
• Knowledge of Lean and/or Six Sigma principles.
 
Job Number: 24-370
Job Location: Brunswick, GA
Rate: $50-$55/hr.
Per Diem: Yes
Overtime: Yes
Duration: 1+ Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Metrology Engineer II

Description:
Position Purpose:
Under minimal supervision, prepare, conduct, and evaluate for the implementation, programming and support of metrology equipment in tooling, program development and production. Assist with the improvements and problem solving for design and manufacturing issues related to tooling, material fabrication and assembly methods.

Unique Skills:
• Interpret & consolidate aircraft engineering, tooling designs and production requirements, to develop optimized measurement plans and processes.
• Under minimal supervision, develop programing for all measurement equipment that will be used in the development, manufacture and support of aircraft.
• Collaborate with engineering, tooling, manufacturing engineering and operations to determine optimal manufacturing procedures.
• Assist in developing and documenting standards for the handling and utilization of metrology equipment.
• Create standardized inspection reports through the utilization of Metrologic software.
• Study and optimize equipment performance for increased capacity and equipment efficiency.
• Interact and collaborate with equipment vendors on warranty repairs, necessary improvements and upgrades.
• Set up and utilize precision measuring tools; validates measurement results for accuracy and repeatability.
• Provide and/or contribute to the documentation of new or recent processes involving metrology techniques or equipment.
• Coordinate the implementation of projects between multiple organizations.
• Support all Safety, Sustainability and Ergonomic Initiatives.

Education and Experience Requirements:
• Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen (18) months of Metrology Engineering, Manufacturing Engineering, Automation Engineering or related technical experience.

Other Requirements:
• Extensive knowledge of metrology equipment, software and current measurement techniques.
• Knowledge 3D CAD/CATIA modeling and an understanding of GD&T.
• Knowledge of Lean and/or Six Sigma principles.
 
Job Number: 24-374
Job Location: Brunswick, GA
Rate: $50-$55/hr.
Per Diem: Yes
Overtime: Yes
Duration: 1+ Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Metrology Engineer II

Description:
****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
Experience with Gulfstream Engineering data preferred.

Education and Experience Requirements:
Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen (18) months of Metrology Engineering, Manufacturing Engineering, Automation Engineering or related technical experience.

Position Purpose:
Under minimal supervision, prepare, conduct, and evaluate for the implementation, programming and support of metrology equipment in tooling, program development and production. Assist with the improvements and problem solving for design and manufacturing issues related to tooling, material fabrication and assembly methods.

Principle Duties and Responsibilities:
Essential Functions: 1. Interpret & consolidate aircraft engineering, tooling designs and production requirements, to develop optimized measurement plans and processes. 2. Under minimal supervision, develop programing for all measurement equipment that will be used in the development, manufacture and support of Gulfstream aircraft. 3. Collaborate with engineering, tooling, manufacturing engineering and operations to determine optimal manufacturing procedures. 4. Assist in developing and documenting standards for the handling and utilization of metrology equipment. 5. Create standardized inspection reports through the utilization of Metrologic software. 6. Study and optimize equipment performance for increased capacity and equipment efficiency. 7. Interact and collaborate with equipment vendors on warranty repairs, necessary improvements and upgrades. 8. Set up and utilize precision measuring tools; validates measurement results for accuracy and repeatability. 9. Provide and/or contribute to the documentation of new or recent processes involving metrology techniques or equipment. 10. Coordinate the implementation of projects between multiple organizations. 11. Support all Safety, Sustainability and Ergonomic Initiatives.

Additional Functions: 1. Work to improve daily processes, and ensures all work meets customer requirements. 2. Assist tool shop as needed, during periodic and conformity Inspections. 3. Provide input toward the selection of metrology equipment and software. Perform other duties as assigned.

Other Requirements: 1. Extensive knowledge of metrology equipment, software and current measurement techniques. 2. Knowledge 3D CAD/CATIA modeling and an understanding of GD&T. 3. Knowledge of Lean and/or Six Sigma principles.
 
Job Number: 11999
Job Location: Brunswick, GA
Rate: $50.00 - $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Metrology Engineer II

Description:
Location: Savannah, GA
Rate:
Duration: Long Term Contract
Shift: 1st Shift
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
Experience with Gulfstream Engineering data preferred.

Education and Experience Requirements:
Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen (18) months of Metrology Engineering, Manufacturing Engineering, Automation Engineering or related technical experience.

Position Purpose:
Under minimal supervision, prepare, conduct, and evaluate for the implementation, programming and support of metrology equipment in tooling, program development and production. Assist with the improvements and problem solving for design and manufacturing issues related to tooling, material fabrication and assembly methods.

Principle Duties and Responsibilities:
Essential Functions: 1. Interpret & consolidate aircraft engineering, tooling designs and production requirements, to develop optimized measurement plans and processes. 2. Under minimal supervision, develop programing for all measurement equipment that will be used in the development, manufacture and support of Gulfstream aircraft. 3. Collaborate with engineering, tooling, manufacturing engineering and operations to determine optimal manufacturing procedures. 4. Assist in developing and documenting standards for the handling and utilization of metrology equipment. 5. Create standardized inspection reports through the utilization of Metrologic software. 6. Study and optimize equipment performance for increased capacity and equipment efficiency. 7. Interact and collaborate with equipment vendors on warranty repairs, necessary improvements and upgrades. 8. Set up and utilize precision measuring tools; validates measurement results for accuracy and repeatability. 9. Provide and/or contribute to the documentation of new or recent processes involving metrology techniques or equipment. 10. Coordinate the implementation of projects between multiple organizations. 11. Support all Safety, Sustainability and Ergonomic Initiatives.

Additional Functions: 1. Work to improve daily processes, and ensures all work meets customer requirements. 2. Assist tool shop as needed, during periodic and conformity Inspections. 3. Provide input toward the selection of metrology equipment and software. Perform other duties as assigned.

Other Requirements: 1. Extensive knowledge of metrology equipment, software and current measurement techniques. 2. Knowledge 3D CAD/CATIA modeling and an understanding of GD&T. 3. Knowledge of Lean and/or Six Sigma principles.
 
Job Number: 11978
Job Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Metrology Specialist

Description:
Metrology Specialist with experience in setup, build, and inspection of large tools and assembly structures. This role is for a hands-on person with great versatility with regard to building and assembling large precision structures. The first task of this role will be to execute the installation and setup of new production fixtures, tooling, and equipment in a new production facility. The specialist in this position will support the production tooling and equipment design and installation in order to create an efficient, organized, and lean factory. After production operations begin, the Metrology Specialist will work closely with production personnel to maintain equipment and tooling and contribute to process improvement using lean processes and tools. Metrology Specialists will also help with the large scale aircraft assembly steps and inspection.

Key Components of position
• Hands‐on Tooling assembly
• Large structure handling: driving a forklift, scissor lift, boom lift, etc. operating a crane or hoist, installing concrete mounting points in floor, accurately locating large or heavy structure to within .005” accuracy.
• Must be able to lift 50 lbs.
• Utilizing CAD or 3D software for inspection (one or more of the following):
o PC Demus, Verisurf, Geomagic, Polyworks, Spacial Analyser, or similar
• Metrology
• Working with laser trackers or similar positioning systems

Professional requirements for position
• Hands on experience in setup of large scale precision fixtures or tooling
• Excellent Organizational Skills and problem-solving skills
• Excellent computer skills (CAD and/or 3D software packages) as well as standard Microsoft products
• Strong team player
• Experience with large aircraft assembly and inspection a plus Metal shop skills (welding, grinding, machining, etc) a plus
• Must be able to take direction well and is a strong team player.
• Extreme attention to detail and continual pursuit of perfection.
• Excellent listening and communication skills.
• Ability to maintain composure in high pressure situations
• Excellent organizational skills and problem-solving skills.
Physical Requirements
• Must be able to stand for extended periods – 8 hours min.
• Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces.
• Physically able to handle items weighing up to 40lbs (unassisted).
• Working in confined spaces
• Working on Elevated Platforms

The Structures Company LLC is an AA/EOE.
 
Job Number: 507
Job Location: Mojave, CA
Rate: $60-$85/Hr. **DOE**
Per Diem: Yes
Overtime: Possible
Duration: Long Term
Start Date: ASAP
Input Date: 06/14/2022
Last Updated: 07/22/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Network Engineer

Description:
Candidate will evaluate, select, and apply standard engineering methods, techniques, procedures and criteria, using independent judgment in making adaptations and modifications. Performs assignments, which have clear and specific objectives and require the investigation of a limited number of variables for ID&C IT Hardware/Network engineering. Assists with the development, implementation, and execution of common work processes and procedures within assigned function across the TOS contract. Performs work, generally within one discipline, which involves the preparation, interpretation or review of calculations, specifications, plans, investigations, surveys, structures, systems or equipment with relatively few complex features; supports ID&C IT Hardware/Network engineering with deploying and adhering to common engineering work processes throughout the TOS contract. Participates in one or more of the following: Equipment design and development, system design (including concept sketches and layouts), testing of materials, preparation of specifications and design calculations, reviewing and checking designs, drawings and data by other engineers or by suppliers, preparation or review of engineering studies and reports, preparation or review of material quantity estimates, uses engineering computer aided design/computer aided engineering (CAD/CAE) tools, participate in incident investigations, fitness for service evaluations, committees formed for specific tasks. Prepares letters for replies to vendor correspondence. Monitors schedule within discipline. Assist in preparation of forecasts, quantity take-offs and change orders. Reviews design documents of equipment manufacturers or subcontractors of a moderate to advanced degree of complexity, and prepares comments and recommendations. It is a condition of employment to wear company issued PPE (Personal Protective Equipment) in accordance with supervisory direction and company policy. Perform other related duties as required.

Required: A recognized degree in a Computer Science, Engineering or a related scientific discipline, from an accredited college or university, or a professional Engineer-In-Training (EIT) license from a recognized licensing board, or a sufficient number of specialized courses in relevant general engineering or appropriate engineering disciplines to meet job requirements. Working knowledge and experience with PC systems hardware, mass storage, graphics, networking, operating systems, and applications. Proficiency in network architecture, network security, and the various fiber-optic and copper cabling systems that comprise the network infrastructure along with a familiarity with TCP/IP and network development practices. Must be able to obtain Security + certification within six months of employment. Participates in and fosters a work environment that is based upon openness, trust, communication, teamwork, empowerment, innovation, and satisfaction. Basic skill in oral and written communication. Candidate must be a United States citizen.

Desired: Knowledge and practical experience with LANs, WANs, WLANs and IPv6. CCNA or related certifications a plus.
 
Job Number: 19-163
Job Location: Tullahoma, TN
Rate: 30-55 hourly
Per Diem: yes
Overtime: possible
Duration: Direct Hire
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: P O BOX 965280
2886 SANDY PLAINS RD

City, State: MARIETTA, GA 30066
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Data Engineer

Description:
We are currently seeking a Data Engineer to fill a role with an international manufacturing company in Chesapeake, VA. This position will require working with Engineering, Design, Sales, and Marketing departments to identify, load and manage product data. Interested candidates should have a familiarity with CAD software and CAD architectures as well as knowledge of programming languages such as Visual Basic in applications like MS Excel or AutoDesk Inventor.

Responsibilities of the Product Data Engineer
Help investigate, define and document product business rules for use in the development of current and future projects.
Gather, organize and verify product data into a usable electronic format, involving creation or remapping of data. Data may include CAD drawings or models, BOMs and customer specifications.
Support Engineering, Design, Sales and Marketing teams to identify, load and manage product data.
Help define and implement management processes involving product data to maximize its usability.
Troubleshoot, support and maintain the integrity of inputs and outputs from the configuration product applications.
Organize CAD data and product rules into AutoDesk Inventor environment as well as automating the creation of 3D Models for a variety product configurations using Visual Basic macro engine.

Requirements
Bachelors Degree in Engineering (Mechanical or Electrical) or related technical discipline.
Working knowledge of programming languages such as Visual Basic in Applications like MS Excel or AutoDesk Inventor.
Familiarity with CAD software and CAD architectures.
Knowledge of relational databases is a bonus.
Excellent verbal and written communication skills as well as strong problem solving and organization skills.
Ability to work in a team environment.
 
Job Location: Chesapeake, VA
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Andrew Bondy
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Production Planner II ( Clearfield, Utah ) S9705161

Description:
Production Planner II ( Clearfield, Utah ) S9705161
12 Month Contract

**MUST HAVE Active Secret DoD Clearance within 5 ½ years of last investigation**

Job Description:
Plans sequence of fabrication, assembly, installation, and other manufacturing operations relating to specific portion of the product for guidance of production workers. Plans detail operations from blueprints, engineering orders, change notices, and other engineering releases. Determines the need for tooling and makes recommendations for the design and planning of required tools. Prepares shop work orders for materials and product processing and coordinates with schedulers to ensure that items are being processed according to specifications and time requirements. Maintains progress reports, schedules, and other related records.

Basic Qualifications:
• Active Secret DoD Clearance within 5 ½ years of last investigation
• Experience in working with aerospace specifications and drawings
• Experience in the areas of composite hand layup, bonding, cure, fastened assembly, subsystems installation, metallic hardware or machining experience
• Excellent computer skills. Skilled in working with Microsoft Office applications.
• Experience authoring manufacturing procedures
• Experience authoring manufacturing procedures both electronic and paper
• Experience creating and maintaining MBOMs
• Functional knowledge of production control systems (SAP/Visual Mfg/etc)
• CAD experience (CATIA or NX)

Preferred Qualifications:
• Experience in the use of NX 10 or higher
 
Job Number: S9705161
Job Location: Clearfield, UT
Rate: Open
Per Diem: No
Overtime: yes
Duration: 12 Month
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: TIMOTHY MAHANEY
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Engineer, Hydraulics

Description:
Develop integrated hydraulics solutions for wheeled and tracked vehicle platforms
Work with suppliers towards the development of the subsystems and components for the hydraulics system
Identify subsystem and component requirements, provide direction to analysis teams, and interpret analysis results
Ability to conduct/lead fluid system analysis
Create test plans and actively lead or guide subsystem level testing
Prepare and present information to the IPT on progress and design solutions
Direct and oversee CAD model development and drawings

Position Requirements:
Must have a Bachelor’s Degree in Mechanical Engineering. Master’s degree preferred.
6 years of relevant experience required. Combat vehicle experience preferred.
Established knowledge on hydraulic systems
Experience in CAD and Advanced simulation tools such as Creo, UG-NX, MATLAB-Simulink, FloMaster
Primary office work with Occasional travel to test locations
 
Job Number: 47865
Job Location: MI
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Bill
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Mechanical Hydraulic Design and Analysis Engineer - Aircraft

Description:
Senior Mechanical Hydraulic Design and Analysis Engineer - Aircraft - China.


Our Aerospace Client based in China is looking for additional Engineering Support . They require a Senior Mechanical Hydraulic Design and Analysis Engineer.

This is an exciting opportunity to work in East Asia , contributing to the success of our Client's Aircraft Program. Good salary / remuneration for suitable skilled and qualified candidates.

Candidates should be prepared to live and work in Shanghai on a fixed term contract basis for 1-3 years.

Our Client's Mechanical Systems team is looking for innovative engineers to join the team in defining and integrating the Hydraulic Systems and components into our current and future

commercial airplane product lines. Their organisation has design, analysis, and certification responsibility for Hydraulic Power system, Hydraulic Conveyance system, Landing Gear and Brake Actuation

systems, Flight Control actuation systems and Systems Control Electronics for all current and future aircraft models.


Position Responsibilities:

  • Work to ensure world-class Hydraulic Systems equipment by collaborating with other organisations such as Aerodynamics
  • Performance and Stability & Control, Structures, Flight Deck Crew Operations, Pilots, Electrical Systems, Systems Stress, Customer
  • Services & Airline Customers, Manufacturing, Flight Line Operations, Supplier Management, Airplane Safety and many others.
  • Developing and validating requirements and interface definitions.
  • Creating new detail design.
  • Conducting various types of analysis and/or simulations, use of CAD systems such as CATIA V5, and math modelling with tools such as Simulink, Matlab, and EASY5.
  • Verifying designs and performance via component, system-level and airplane-level testing.
  • Participate in design reviews and engage in supplier coordination.
  • Participate in activities related to certification of our client's products with regulatory agencies.
Experience and Qualifications:

  • Candidate must possess specialised experience designing mechanical components and assemblies, including latches, hinges, door mechanisms, locks, articulating bracketry, valves, pumps and/or actuators.
  • Degree and typical experience in engineering classification:
  • Bachelor's and 15 or more years' experience, Master's with 12 or more years' experience or PhD with 10 or more years' experience.
  • Bachelor,Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
  • Working experience with major airframers or major hydraulic components / systems suppliers is preferred.
  • Fluent English, with good communication skills.

 
Job Number: BH-57-2
Job Location: Shanghai, China
Rate: Good Package / Negotiable. 1 - 3 year Fixed Term Contracts
Per Diem: --
Overtime: --
Duration: 1 - 3 years
Start Date: 12/19/2019
Input Date: 11/14/2020
Last Updated: 11/23/2020
Firm Name: STRONGFIELD TECHNOLOGIES INC
Attention: Graham Bird
Address: 1200 MCGILL COLLEGE AVE STE 1100
City, State: MONTREAL, PQ H3B 4G7
Country: CANADA
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Struct & Payloads Designer 4

Description:
Struct & Payload Designer 4

Location: Germantown, MD
Duration: 12 months

Description:
Must be able to conceptualize and design parts using a variety of fabrication processes. They must be able to create models of parts in CAD and create accurate and concise fabrication and assembly documentation that follow industry standards and communicate with a vast audience. Their designs must be optimized for cost and ease of manufacturing. They will also be involved in design reviews, component selection, perform tolerance analysis, and prototyping of new designs. Must have a minimum of 14 years’ experience using 3D modeling tools Solidworks and/or Creo. Experience with injection molding plastics, vacuum forming plastics, CNC machining, sheet metal fabrication, connector selection, cable design, graphics design, and rendering in CAD.

Education / Experience: BSME not required, this is a designer position

Skill Code: 639-Payload Systems Design
 
Job Number: 20-00432
Job Location: Germantown, MD
Per Diem: split
Overtime: possible
Duration: 12 months
Start Date: 2/10/2020
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 859 STEPHENSON HWY
City, State: TROY, MI 48083
Phone: 843/955-9221
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer

Description:
• Must have experience with primary and secondary structural design.
• Must have experience with a CAD software (Catia, UG, etc.). SolidWorks is preferred.
• Experience with completions, or interiors is a plus
• Degree is not required, but preferred.


The Structures Company is an AA/EOE.
 
Job Number: 344
Job Location: IN
Rate: $50-$57/Hr. **DOE**
Per Diem: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last two (2) years with an investigation in the last 5 years required ****

Job Description:
1. Candidate responsibilities will span the program lifecycle, including setting up new program Configuration Management (CM) processes and tools, performing Data Management (DM) responsibilities, and supporting Engineering and Program Management personnel.
2. The candidate will be required to work with legacy CM/DM data and software systems.
3. The candidate will have to interpret program requirements and develop CM/DM processes to meet customer expectations.
4. The selected applicant will be a member of a high-performing multi-site team and must be self-motivated with a strong work ethic, time-management, and interpersonal skills.
5. The successful candidate must demonstrate effective communication skills as the position will frequent internal interactions with project leads and other engineers in the group.
6. To include briefing at customer meetings
7. Up to 25% travel required

Basic Qualifications:
1. Bachelors Degree in STEM or Equivalent.
2. Engineering Documentation System experience.
3. Configuration Management experience.
4. Active Secret Security Clearance.

Desired Skills:
1. Experience with Special Missions Program data.
2. Configuration Management training or certification.
3. Excellent communication skills and extensive experience interacting with the customer.
4. Excellent Organizational skills including tracking of configuration status.
5. Ability to generate, disseminate, and execute light weight processes and procedures.
6. Experience with Product Lifecycle Management (PLM) Tools such as CAD Datanet, TeamCenter, or 3DS.

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11790
Job Location: Palmdale, CA
Rate: $75.00 - $86.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last two (2) years with an investigation in the last 5 years required ****

Job Description:
1. Candidate responsibilities will span the program lifecycle, including setting up new program Configuration Management (CM) processes and tools, performing Data Management (DM) responsibilities, and supporting Engineering and Program Management personnel.
2. The candidate will be required to work with legacy CM/DM data and software systems.
3. The candidate will have to interpret program requirements and develop CM/DM processes to meet customer expectations.
4. The selected applicant will be a member of a high-performing multi-site team and must be self-motivated with a strong work ethic, time-management, and interpersonal skills.
5. The successful candidate must demonstrate effective communication skills as the position will frequent internal interactions with project leads and other engineers in the group.
6. To include briefing at customer meetings
7. Up to 25% travel required

Basic Qualifications:
1. Bachelors Degree in STEM or Equivalent.
2. Engineering Documentation System experience.
3. Configuration Management experience.
4. Active Secret Security Clearance.

Desired Skills:
1. Configuration Management training or certification
2. Excellent communication skills and extensive experience interacting with the customer.
3. Experience with CAD DataNet Tool

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11788
Job Location: Palmdale, CA
Rate: $75.00 - $86.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Designer

Description:
A Technical Designer job in Kent, WA is currently available through Belcan. In this role, you will be responsible for designing and developing electrical diagrams, schematics, harness assemblies and installation drawings for rocket engine avionics production test systems. To be considered for this role, you will have an Associates degree in a related discipline, plus a minimum of 4 years of relevant experience. Candidates must be a US Citizen or national, US permanent resident (current Green Card holder), or lawfully admitted into the US as a refugee or granted asylum.

Technical Designer Job duties:

* Create 2-D electrical schematics, diagrams and drawings using AutoCad, Creo (Pro/Engineer), and Creo Schematics (RSD) for avionics production test systems.
* Create harness detail assemblies and installation drawings, including 2D flat harness drawings from the 3-D harness data sets.
* Create From-To wire list spreadsheets and documents from export datasets.
* Create mechanical detail drawings for parts fabrication.
* Provide technical guidance for hardware installation.

Qualifications:

* Experience with Creo - ProCabling highly desired; equivalent other software will be considered if all other required qualifications are met.
* Familiar with existing applicable harness standards - IPC/WHMA-A-620.
* Strong electrical/mechanical design and integration skills using 2-D and 3-D CAD software.
* Experience with Geometric Dimensioning and Tolerancing (GD&T).

If you are interested in this Technical Designer job in Kent, WA, please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

 
Job Number: 297876
Job Location: Kent, WA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Firm Name: BELCAN TECHSERVICES
Attention: DerrickHart
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structures & SystemsTest Engineer

Description:
Seeking an experienced structures & systems test engineer to support testing of mechanical systems and avionics components, assemblies, and integrated systems. The main tasks of this role are to define test requirements with internal customers, write test plans, design test stands and execute tests under the direction of the Engineering lead and/or Manager. Engineers in this position are expected to have knowledge of industry standard test practices and methods as well as engineering skills in design and analysis to required to develop custom tests.


Must have experience with:
• Mechanical systems, specifically pneumatic valves.
• RTCA – DO-160
• Vibration & thermal testing
• Functional testing
• Knowledge of test procedures
• Acceptance testing
• Data analysis
• Thermocouples
• CAD drawings – CATIA V5
• FEMAP and NASTRAN
• LabView
• SolidWorks
• Must be able to write reports


Your Mission:
• Design tests plans and equipment for validation of complex mechanical or structural components and systems.
• Write test plans and procedures to define and support execution of tests.
• Interface with internal customers on integrated program teams to establish and verify specific test requirements.
• Work with support teams and vendors to procure, manufacture and assemble test articles and test stand hardware and equipment.
• Analyze test data to verify test requirements and write test reports to document test results.
• Interface with external test laboratories to facilitate testing for design and analysis teams.
• Participate in the test engineering review, approval and release process.
• Participate in the continuous improvement of testing practices, including test processes, lab procedures and lab technology implementation.


What you bring:
• Bachelor’s degree from an accredited institution, with a concentration in a relevant Engineering discipline.
• 4-8 years’ or more experience in aerospace with an emphasis on testing or equivalent laboratory test engineering experience
• CAD modelling experience – Experience with Catia V5 preferred
• Experience with simulation and finite element analysis preferred – NASTRAN, Femap
• Experience with DO-160 environmental test standards for mechanical systems
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
• Focus on safety and reliability in testing.
• Results oriented approach to completing test activities successfully.
• Excellent verbal and written communication skills
• Excellent Organizational Skills and problem-solving skills
• Strong team player.
• Excellent computer skills, including Outlook, Word, Excel and PowerPoint


ITAR Requirements
To conform to U.S. Government space technology export regulations, applicant must be a U.S. citizen, lawful permanent resident of the U.S.

The Structures Company is an AA/EOE.
 
Job Number: 290
Job Location: CA
Rate: $70-$75/Hr. **DOE**
Per Diem: Yes
Overtime: Possible
Duration: 10+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Back to Advanced Job Search