Job Search Results

443 listings were found that matched your search words: Keywords: Aerospace ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2024/03/28 Thursday 06:43AM Pacific Time by ContractJobHunter. )

Listings 1 - 443

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
3 Aircraft Stress Engineers with Composites

Description:
3 Aircraft Composite Stress Engineers Needed.
Require 10+ years of aircraft/aerospace stress analysis with a good composites background.
Previous FEMAP experience is a plus.
Composite airframe analysis experience a MUST.
MUST be US Persons

Qualifications:
-Experience in aircraft or spacecraft composite, design and analysis processes
-Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures
-Minimum 10 years or more of applicable experience in the analysis of structural systems using strength of materials and finite element based methods
-Experience with free-body diagrams and classical stress analysis techniques
-Experience with FEMAP
-Rapid prototyping experience a strong plus
-Excellent computer skills, including Outlook, Word, Excel and PowerPoint
-Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
-Applicants must be U.S. persons as defined by ITAR
Educational Requirements-
Bachelors degree from an accredited institution, with a concentration in a relevant Engineering discipline

The Structures Company is an AA/EOE.
 
Job Location: Mojave, CA
Rate: $80-85/hr DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Last Updated: 01/04/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2 Stress Engineer Openings - Composites - Contract-to-Hire

Description:
We have a need for 2 Aircraft Composite Stress Engineers that are open to a contract-to-hire scenario. MUST be US Citizens.
Require 10+ years of aircraft/aerospace stress analysis with a good composites background.
Previous FEMAP experience is a plus.
Composite airframe analysis experience a MUST.
MUST be US Citizens

Qualifications:
-Experience in aircraft or spacecraft composite, design and analysis processes
-Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures
-Minimum 10 years or more of applicable experience in the analysis of structural systems using strength of materials and finite element based methods
-Experience with free-body diagrams and classical stress analysis techniques
-Experience with FEMAP
-Rapid prototyping experience a strong plus
-Excellent computer skills, including Outlook, Word, Excel and PowerPoint
-Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
-Applicants must be U.S. Citizens
Educational Requirements-
Bachelors degree from an accredited institution, with a concentration in a relevant Engineering discipline

The Structures Company is an AA/EOE.
 
Job Location: Mojave, CA
Rate: Open
Per Diem: Yes
Overtime: Yes
Duration: Contract-to-hire
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2571 - EMC ENGINEER - cv, word doc only

Description:
Execute complex engineering assignments requiring expertise within EMC field.

Analyze modifications at Aircraft level and check compliance with certification regulations.

Estimate the level of impact of complex projects.

Propose plans for production ramp-up.

Participate in complex investigations related to cost reduction.

Participate in meetings and design reviews with system or structural suppliers for design optimization and cost reduction.

Participate in Continued Airworthiness projects and propose risk mitigating solutions.

University degree in Aerospace Engineering or equivalent. Specialization in Electromagnetic Compatibility and Susceptibility is required.

Have a minimum of 8 years working experience in the specialty within the Aerospace domain.

Are familiar with the relevant industry standards and best practices such as DO-160, SAE ARP, FAA regulations, as well as other applicable airworthiness regulations.

have good knowledge about FAR 25.981 regulations and fuel tank protection against lightning and static electricity
Familiarity with electromagnetic simulation / analysis tools (such as EMA3D) is a strong asset.

Have strong analytical skills.

Have team spirit, and have the ability of working in a multicultural environment.

Are self-motivated and are proactive in finding solutions to problems.

Have strong communication skills (written and spoken) in French and English.

Are able to travel.
 
Job Number: 2571
Job Location: Mirabel, Canada
Rate: 58.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2580 - AVIONICS SYSTEMS INTEGRATOR - cv, word doc only

Description:
Responsible, as an Avionics Systems Integrator, to perform various tasks related to the development, qualification, certification and in-service support of Avionics systems on Challenger aircrafts.

Responsible for supporting investigation for in service and manufacturing issues and performing root cause analysis of Avionics systems.

Participate in the Avionics Systems architecture design to meet Aircraft Design Requirements and Objectives.

Support the Bombardier Flight Test Center in development and certification tests; witnessing of tests may be required.

Support the Final Assembly Line and In Service Aircraft for any development issues.

Manage, review and approve the deliverables of the Avionics System Suppliers.

Work with other functions & disciplines of the Challenger program to provide required information and also to collect required data to allow the Avionics design, development & certification effort to progress.

Support other departments such as Production, Customer Support, Program Office and Product Planning.

Participate in meetings and design reviews with Avionics System Suppliers and certification authorities.

Be able to travel is a must.

University degree in Electrical, Electronics, Software, or Aerospace Engineering. with at least five (5) years of relevant experience with the design, development, integration and certification of Avionics systems.

Good knowledge with the specification, design, integration, test and certification of Avionics systems on aircraft.

Must have a good knowledge of RTCA documents DO-178 and DO-160.

Must be familiar with part FAR25/525 certification process and with the ARP4754 standard.

Have an experience with civil aircraft and airworthiness authorities.

Are proficient with the use of Microsoft Office software tools to produce presentation and reports.

Have the ability to work well in a team environment.

Have strong communication skills (written and spoken).
 
Job Number: 2580
Job Location: Montreal, Canada
Rate: 58.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2581 - RELIABILITY, MAINTAINABILITY & SAFETY ENGINEER - cv, word doc only

Description:
Prepare reliability & safety studies, Failure Modes and Effects Analysis (FMEA), Aircraft Functional Hazard Analysis, Fault Tree Analysis and System Safety Analysis to certify modifications to the Challenger aircraft systems.

Participate in internal and external Design Reviews with Partners/Suppliers. You will be responsible for reviewing Partner%u2019s/Supplier%u2019s reports and ensure reliability & safety requirements are met.

Interface with various (Design Authorized Delegate) DAD disciplines Systems Engineering, Flight Sciences as part of the Integrated Design Team.

Interface with other internal and external customers (e.g. Airworthiness, Product Support, Marketing, Partners, and Certification Authorities).

Be involved with the maintenance engineering group to evaluate potential changes to certified maintenance tasks in conjunction with the DAD.

Evaluate potential modification/creation of Master Minimum Equipment List (MMEL) items with Transport Canada Civil Aviation (TCCA) and Federal Aviation Administration (FAA).

Prepare and present risk assessments for continued airworthiness queries.

Have at least 15 years of experience in the field of aircraft reliability/safety and in particular the following:

Creating and reviewing System safety assessments that meet the requirements of ARP4761.

Experience in evaluating in-service issues which are subject to safety.

Review and propose different certified maintenance task intervals for previously certified systems.

Experience with Continued Airworthiness Risk Assessments (CAA).

Experience in creating and proposing changes to the MMEL for TCCA and FAA.

Have experience in applied aerospace reliability engineering for mechanical and electrical components including reliability prediction.

Have completed various types of aircraft level assessments such as Particular risk analysis (rotor burst, tire burst) and zonal analysis.

Experience with ARP4754 is considered an asset.

Must be familiar with common reliability and safety processes and tools to perform the above mentioned tasks (e.g. Reliasoft, CAFTA.).

Experience with civil aircraft and civil airworthiness regulations is mandatory (TCCA, FAA, EASA).

Excellent comprehension and applied skills with FAR/JAR 25.1309 and all associated guidance material.

Good writing skills and communication skills in English is essential for the position.

Must possess the ability to work with minimum supervision and be a team player.

Must also be a person with initiative, a strong sense of responsibility and good engineering judgment.
 
Job Number: 2581
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2582 - HYDRO-MECHANICAL SYSTEMS ENGINEER - cv, word doc only

Description:
Take part in the integration of the flight control, hydraulic and/or landing gear system for the definition, specification, design, analysis, modification, test and certification of hydro-mechanical systems.

Coordinate product development activities between the supplier of the system and the affected work packages.

Ensure successful design, validation, certification and delivery of the system.

Ensure successful completion of each development phase deliverables (may author, review, approve).

Problem solve the technical issues in a cross functional environment.

Be involved in the design and integration of the system.

Review the design and documentation of all the aspects related to your system.

Check for quality of the Supplier's analyses.

Validate and verify system requirements as well as system performance through design reviews, analyses, rig and aircraft testing.

Define, prepare and execute qualification and certification tests.

Work with supplier in the investigation and resolution of test findings.

Bachelor or Master's (preferred) degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of five (5) to seven (7) years.

Have a background in design, integration, development and certification of Hydro-Mechanical Systems.

Cognizant of the relevant Airworthiness Regulations and certification process.

Good oral and technical writing skills in English (required).

Are motivated, self-starter, organized, autonomous and able to work under limited supervision.

Ateam player and able to work with suppliers and customers.

Are a dynamic person with initiative, a strong sense of responsibility and good judgment.

Have knowledge of MS Office software (essential).

Have knowledge of CATIA, Matlab, Simulink (an asset).
 
Job Number: 2582
Job Location: Toronto, Canada
Rate: 55.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2584 - ELECTRICAL WIRING INTERCONNECT SYSTEM (EWIS) ENGINEER - cv, word doc only

Description:
Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS.

Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical.

Support Production; respond to RNC.

Provide technical assistance to engineering staff and contribute to completion of project milestones.

Apply knowledge to provide solutions to a variety of technical problems of moderate scope and complexity, using a combination of judgment with defined practices and procedures.

Requirements

Bachelor Degree in Aircraft Avionics or Electrical Engineering or Bachelor Degree in Engineering with equivalent work experience in Wiring Integration or Design.

Have a minimum of 15 years of relevant aerospace experience.

Must have wiring design, wiring installation and/or wiring troubleshooting experience and you are familiar with ECAD tools & processes.

Are capable of interfacing with wiring diagrams, system, and EMI/EMC requirements.

Have an intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installations and maintainability requirements.

Have an excellent verbal and written communication skills, and computer skills (PC/MS Office) are required.

Must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative.

Have knowledge of Catia V5.

Have an Avionic and or EWIS MRB approval knowledge and understanding, an asset.

English - French working knowledge an asset.
 
Job Number: 2584
Job Location: Canada
Rate: 61.00 US
Per Diem: Paid - 3mt
Overtime: Paid - NOT at 1.5X
Duration: 12 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2585 - DESIGN ENGINEER - CV in 'word doc - only'

Description:
Provide expertise for the design and manufacturing of aerospace components (Metallic & Composite aircraft structure, systems installation and hardware/materials).

Participate in the identification of design ideas.

Analyze current engineering design and proposed new Design solution to facilitate the assembly of the components.

Support Design plan, coordinate its implementation and draw conclusions.

Support recommendation to senior management on strategies to Design assembly improvement.

Support prioritization of ideas implementation, based on ROI (Return on Investment) but also other criteria's and program requirements.

Support processes and strategies around the batching/combination of ideas to ease the implementation of design improvements.

Review supplier drawings, dimensional tolerances, Datum definition, manufacturing processes, process capabilities, tooling philosophy and provides recommendations as needed.

Support integration team in the preparation of the Product Change Request (PCR).

Requirements:

Have a University degree in Aerospace or Mechanical engineering or in a related field of Design.

Have a minimum of 15 years of experience in aircraft structure and manufacturing organization.

Have a good understanding of design, manufacturing and quality processes used in aerospace for metallic and composite structures, system installation and hardware/materials.

Have prior experience in design for assembly or other aircraft program optimization activity, an asset.

Must have knowledge of aircraft structures (Primary & Secondary) & Systems Installations, hydraulics, fuel etc., detailed assembly installations and detailed drawings 3DMBD.

Must have knowledge of SAP, CATIA V5/ENOVIA and (GD&T) Geometric Dimensioning and Tolerance.

Must have excellent troubleshooting skills.

Have great communication skills: can explain complex problem in simple words.

Are able and efficient at managing several projects in parallel.

Have a high sense of commitment, and a willingness to accept responsibilities while acting independently in a high-pressure and production ramp-up environment.

Have working experience using Catia V5 and Microsoft tools.

Are bilingual (French and English), is an asset.

Are able to travel to on-site supplier in USA, Europe and Asia.
 
Job Number: 2585
Job Location: Canada
Rate: 56 USD
Per Diem: Paid - 3mt
Overtime: Paid - NOT at 1.5X
Duration: 12 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
****Candidate can start without a Secret Clearance, but must be able to obtain a Secret Clearance ****

Job Description:
1. This position is deployed to the Revolutionary Technology Programs (RTP) team to provide technical expertise and leadership.
2. Expected to support team’s performance on project related to the analysis, design, and testing of aerospace and plasma physics experiments.
3. Primary responsibilities will involve design and construction of pulsed power electronics, control systems relating to power systems, and data acquisition electronics to support fusion plasma physics experiments.
4. Normal activities will include test procedure writing, performing hardware test & fault isolation and leading troubleshooting operations in a small fast, moving team.
5. Requires use of MS Office software tools to compile data, reduce data, and generate reports.
6. Strong verbal and written communication skills are highly desirable.
7. Occasional overtime and odd hours required.
8. Candidate must be able to work in a manufacturing and laboratory environment, including wearing radiation safety badge.
9. Applicant selected will be subject to a government security investigation and must meet eligibility requirements for access to classified information.
10. Must be able to obtain a Secret security clearance and be able to obtain special access program clearances.
11. Must be a US Citizen.
12. This position is located at a facility that requires special access.

Qualifications:
1. Level 4: BS+16 YRS or MS+14 YRS
2. Experience in pulsed power or power systems design and fabrication and data acquisition systems design and implementation.
3. Experience in design and fabrication of high voltage, high current, high energy, and high power systems.
4. Experience with laboratory power equipment such as oscilloscope.
5. Experience leading teams.
6. Experience in utilizing energy storage devices such as batteries, ultra-capacitors, high voltage film capacitors, high current inductors, and electromagnets.
7. Experience in utilizing high power and high voltage semiconductors such as IGBTs, SCRs, and MOSFETs in power conversion.
8. Experience in utilizing high voltage and high power technologies such as spark gap switches, pulse transformers, high voltage relays.
9. Experience in utilizing high voltage and high current diagnostics such as high voltage probes, Rogowski coils, current transformers, Hall Effect transducers, and grounding rods.
 
Job Number: 11740
Job Location: Palmdale, CA
Rate: $90.00 - $102.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
****Candidate can start without a Secret Clearance, but must be able to obtain a Secret Clearance ****

Job Description:
1. This position is deployed to the Revolutionary Technology Programs (RTP) team to provide technical support/direction.
2. Expected to support team's performance on project related to the analysis, design, and testing of plasma physics experiments.
3. The position more generally requires working in a small, fast moving team on concept level analysis, study of plasma stability and behavior, as well as detailed design of experimental hardware and experiments.
4. Requires use of MS Office software tools to compile data, reduce data, and generate reports.
5. Strong verbal and written communication skills are highly desirable.
6. Occasional overtime and odd hours required.
7. Candidate must be able to work in a manufacturing and laboratory environment, including wearing radiation safety badge.
8. Applicant selected will be subject to a government security investigation and must meet eligibility requirements for access to classified information.
9. Must be able to obtain a Secret security clearance.
10. Selected applicant must also possess, or be able to obtain, special access program clearances.
11. Must be a US Citizen.
12. This position is located at a facility that requires special access.

Qualifications:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
2. Must have experience in designing, developing, testing, analyzing, or modeling/simulating plasma physics experiments/phenomena.
3. Ph.D. in Physics, Aerospace Engineering, Mechanical Engineering, Nuclear Engineering, or Electrical Engineering with strong background in experimental plasma physics preferred.
4. Strong research background in plasma diagnostics.
5. Strong research background working with or developing neutral beams.
6. Experience working with high vacuum and ultra-high vacuum systems.
7. Proficient with analysis tools such as MATLAB and/or LabVIEW.
8. Good oral presentation and written skills.
 
Job Number: 11710
Job Location: Palmdale, CA
Rate: $70.00 - $83.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
****Candidate can start without a Secret Clearance, but must be able to obtain a Secret Clearance ****

Job Description:
1. This position is deployed to the Revolutionary Technology Programs (RTP) team to provide technical support/direction.
2. Expected to support team’s performance on project related to the analysis, design, and testing of plasma physics experiments.
3. The position more generally requires working in a small, fast moving team on concept level analysis, study of plasma stability and behavior, as well as detailed design of experimental hardware and experiments.
4. Requires use of MS Office software tools to compile data, reduce data, and generate reports.
5. Strong verbal and written communication skills are highly desirable.
6. Occasional overtime and odd hours required.
7. Candidate must be able to work in a manufacturing and laboratory environment, including wearing radiation safety badge.
8. Applicant selected will be subject to a government security investigation and must meet eligibility requirements for access to classified information.
9. Must be able to obtain a Secret security clearance.
10. Selected applicant must also possess, or be able to obtain, special access program clearances.
11. Must be a US Citizen.
12. This position is located at a facility that requires special access.

Qualifications:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
2. Must have experience in designing, developing, testing, analyzing, or modeling/simulating plasma physics experiments/phenomena.
3. Ph.D. in Physics, Aerospace Engineering, Mechanical Engineering, Nuclear Engineering, or Electrical Engineering with strong background in experimental plasma physics preferred.
4. Strong research background in plasma diagnostics.
5. Strong research background working with or developing neutral beams.
6. Experience working with high vacuum and ultra-high vacuum systems.
7. Proficient with analysis tools such as MATLAB and/or LabVIEW.
8. Good oral presentation and written skills.
9. Proficient with MS Office tools.
 
Job Number: 11678
Job Location: Palmdale, CA
Rate: $70.00 - $83.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer / Matlab Labview / strong background in experimental plasma physics CA

Description:
166532
Job Title: Aeronautical Engineer
Work Site Address: Palmdale, CA 93599
Job Number: 2222-1
Max Pay Rate: $83.00/hr
Start Date: 12/2/2019
End Date: 12/31/2020
Position Type: Contract

Job Summary:
This position is deployed to the Revolutionary Technology Programs (RTP) team to provide technical support/direction. Expected to support team’s performance on project related to the analysis, design, and testing of plasma physics experiments.

Roles and Responsibilities
The position more generally requires working in a small, fast moving team on concept level analysis, study of plasma stability and behavior, as well as detailed design of experimental hardware and experiments.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
Ph.D. in Physics, Aerospace Engineering, Mechanical Engineering, Nuclear Engineering, or Electrical Engineering with strong background in experimental plasma physics
Must have experience in designing, developing, testing, analyzing, or modeling/simulating plasma physics experiments/phenomena
Requires use of MS Office software tools to compile data, reduce data, and generate reports.
Strong verbal and written communication skills are highly desirable.
Occasional overtime and odd hours required.
Candidate must be able to work in a manufacturing and laboratory environment, including wearing radiation safety badge.
--Strong research background in plasma diagnostics
--Strong research background working with or developing neutral beams
--Experience working with high vacuum and ultra-high vacuum systems
--Proficient with analysis tools such as MATLAB and/or LabVIEW
--Good oral presentation and written skills
--Proficient with MS Office tools


Qty 1 position
Applicant selected will be subject to a government security investigation and must meet eligibility requirements for access to classified information.
None to start. Must be able to obtain a Secret security clearance.
 
Job Number: JE-2222-1ATO
Job Location: Palmdale, CA
Rate: 83/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer / Matlab Labview designing, developing, testing, analyzing, or modeling/simulating plasma physics experiments/phenomena CA

Description:
166557
Job Title: Aeronautical Engineer

Work Site Address: Palmdale, CA 93599
Job Number: 2225-1
Max Pay Rate: $83.00/hr
Start Date: 12/2/2019
End Date: 12/31/2020
Position Type: Contract

Job Summary:
This position is deployed to the Revolutionary Technology Programs (RTP) team to provide technical support/direction. Expected to support team’s performance on project related to the analysis, design, and testing of plasma physics experiments.

The position more generally requires working in a small, fast moving team on concept level analysis, study of plasma stability and behavior, as well as detailed design of experimental hardware and experiments. Requires use of MS Office software tools to compile data, reduce data, and generate reports. Strong verbal and written communication skills are highly desirable.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
Ph.D. in Physics, Aerospace Engineering, Mechanical Engineering, Nuclear Engineering, or Electrical Engineering with strong background in experimental plasma physics
--Must have experience in designing, developing, testing, analyzing, or modeling/simulating plasma physics experiments/phenomena
--Strong research background in plasma diagnostics
--Strong research background working with or developing neutral beams
--Experience working with high vacuum and ultra-high vacuum systems
--Proficient with analysis tools such as MATLAB and/or LabVIEW
--Good oral presentation and written skills
Occasional overtime and odd hours required. Candidate must be able to work in a manufacturing and laboratory environment, including wearing radiation safety badge.

Qty 1 position
 
Job Number: JE-2225-1ATO
Job Location: Palmdale, CA
Rate: 83/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer / design and construction of pulsed power electronics, control systems relating to power systems, and data acquisition electronics to support fusion plasma physics experiments CA

Description:
166650 Job Title: Aeronautical Engineer

Work Site Address: Palmdale, CA 93599
Job Number: 2228-1
Max Pay Rate: $102.00/hr
Start Date: 12/2/2019
End Date: 12/31/2020
Position Type: Contract

Job Summary:
This position is deployed to the Revolutionary Technology Programs (RTP) team to provide technical expertise and leadership. Expected to support team’s performance on project related to the analysis, design, and testing of aerospace and plasma physics experiments.

Primary responsibilities will involve design and construction of pulsed power electronics, control systems relating to power systems, and data acquisition electronics to support fusion plasma physics experiments. Normal activities will include test procedure writing, performing hardware test & fault isolation and leading troubleshooting operations in a small fast, moving team. Requires use of MS Office software tools to compile data, reduce data, and generate reports.

Qualifications and Education Requirements
BS+16 YRS or MS+14 YRS
Strong verbal and written communication skills are highly desirable.
Occasional overtime and odd hours required.
Candidate must be able to work in a manufacturing and laboratory environment, including wearing radiation safety badge.
--Experience in pulsed power or power systems design and fabrication and data acquisition systems design and implementation
--Experience in design and fabrication of high voltage, high current, high energy, and high power systems
--Experience with laboratory power equipment such as oscillo
--Experience leading teams
--Experience in utilizing energy storage devices such as batteries, ultra-capacitors, high voltage film capacitors, high current inductors, and electromagnets
--Experience in utilizing high power and high voltage semiconductors such as IGBTs, SCRs, and MOSFETs in power conversion
--Experience in utilizing high voltage and high power technologies such as spark gap switches, pulse transformers, high voltage relays
--Experience in utilizing high voltage and high current diagnostics such as high voltage probes, Rogowski coils, current transformers, hall effect transducers, and grounding rods

Qty 1 position
 
Job Number: JE-2228-1ATO
Job Location: Palmdale, CA
Rate: 102/hr DOE
Per Diem: pd split possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Interior Design Engineer - Solidworks

Description:
POSITION SUMMARY:
Provides all levels of engineering drawings related to interior cabin furnishing and components in support of VIP aircraft completions. Mentors other engineers on department techniques and processes. Must have aircraft interiors completions experience and experience designing monuments, galleys, credenzas, closets, beds, tables, etc.



ESSENTIAL JOB FUNCTIONS:
1. Develops advanced level design data packages for interior cabin furnishing in support of VIP aircraft completions.
2. Utilizes airworthiness requirements and the project specification to create drawings.
3. Creates and reviews engineering drawings, specifications, service bulletins, reports, etc.
4. Performs research and design relating to the production of engineering drawings necessary for installation and completion of custom aircraft interiors.
5. Prepares advanced level interior cabin furnishings reports, Engineering Authorizations (EA’s), drawings, and EO’s.
6. Develops advanced level interior cabin furnishings modifications and installation work instructions, procedures and recommendations.
7. Mentor and train less experienced engineers within department to increase overall efficiency of department.
8. Identifies discrepancies and/or problems with drawings before releasing to production and implements correction action to ensure the timely release.
9. Provides advanced level technical support and engineering disposition in order to resolve aircraft engineering/interior cabin furnishing problems.
10. Using company procedures, applies engineering knowledge to resolve complex issues.
11. Maintains advanced level awareness of FAA regulations and required compliance of FARs, ADs, SBs.
12. Actively works to improve daily processes, and ensures all work meets completion aircraft requirements.
13. Performs other duties as assigned.


MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
1. Bachelor’s Degree in Mechanical or Structural Aerospace Engineering or comparable.
2. 2-5 years’ experience in Furnishings, Design or Structural Engineering.
3. Familiarity with the Supplemental Type Certificate (STC) process

REQUIRED SKILLS AND ABILITIES:
1. Proficient with Microsoft Word, Excel, PowerPoint, Outlook, and Internet Explorer.
2. Knowledge of Federal Aviation Regulations (FARs) governing aircraft certification Preferred.
3. Ability to read, write, speak, and understand the English language.
4. Computer Aided Drafting/Design - SolidWorks required
5. Aviation background and electrical systems experience required.
6. Strong knowledge of industry mechanical systems and documentation standards.
7. Experience with electrical systems and components.
8. Strong communication and problem-solving skills.
9. Strong time-management and organizational skills.





The Structures Company is an AA/EOE.
 
Job Number: 339
Job Location: Indianapolis, IN
Rate: $50-57/Hr. **DOE**
Per Diem: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Stress Engineer Openings

Description:
Aircraft Stress Engineers needed.
MUST BE US PERSONS.
BS Degree a MUST.
FEMAP is a plus but not required.
Strong classical analysis/hand calcs a MUST.

REQUIRED SKILLS AND ABILITIES:
1. Familiarity with Federal Aviation Regulations (FARs) governing aircraft certification.
2. Strong understanding of aircraft structural modifications (both interior and airframe).
3. Strong command of classical hand-analysis techniques.
4. Proficient with the following software:
a. Microsoft Word, Excel, PowerPoint, Outlook, and Internet Explorer.
b. NASTRAN/FEMAP(basic user skill, proficiency a plus)
c. AutoCAD (basic user skill, proficiency a plus)
d. SolidWorks (basic user skill, proficiency a plus)
e. Visual Basic or other coding skills a plus
Final 1-2017
5. Strong knowledge of Finite Element Modeling and Analysis techniques.
6. Ability to interpret design drawings of various aircraft modifications and identify design changes required to
ensure that sound load paths and structural integrity are maintained.

MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
1. Bachelor’s Degree in Aerospace, Aeronautical, or Mechanical Engineering or the equivalent.
2. Five (5) or more years of experience working in aircraft stress analysis - airframe or interiors/completions on transport category aircraft, installation designs, including but not limited to Supplemental Type Certificate (STC) work, structural
substantiation analysis and report development, aircraft modification designs under 14 CFR Part 25 STC
projects, and test plans and test report authoring and review.

The Structures Company LLC is an AA/EOE.
 
Job Location: IN
Rate: Open / DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler - no clearance FL

Description:
166618 Job Title: Assembler

Work Site Address: Oldsmar, FL 34677
Job Number: 2423-1
Max Pay Rate: $22.00/hr
Start Date: 10/30/2019
End Date: 11/1/2020

Job Summary:
Builds complex sub-assemblies using a variety of tools including crimpers, lugging devices, torque devices and other complex and basic hand tools. Builds complex structural assemblies using blueprints and processes.
Job Description: Should NOT include client name, rates or security clearance requirements. What is provided here WILL be on the Job Board
Roles and Responsibilities
Fabricates complex wire harnesses with a variety of complex connecting devices. Reads and interprets complex wire diagrams, blueprints, drawings and work instructions. Solders complex components in sub-assemblies using a variety of techniques including j-hooks, turrets, etc.

Qualifications and Education Requirements
Technical, vocational and/or related military technical degree in electronics or related discipline.
Mandatory 10 + years of experience in aerospace and/or DOD manufacturing or modification involving the installation or modification of electronical components and electrical systems.
Thorough understanding of electrical theory and excellent understanding of electrical schematics and drawing.
Previous experience working in an ESD environment.
Ability to work with little to no supervision.
Very strong solder skills are a requirement.
Good written and communication skills.
Computer skills must be intermediate to advanced.

Preferred Skills
Skills: Category Name Required Importance Experience
Technical Skills Soldering Yes 5 2 - 4 Years


Qty 3 positions
 
Job Number: LMRMS-2423-1
Job Location: Oldsmar, FL
Rate: 22/hr max
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Associate Engineer Tool / Catia NX CAD CA

Description:
166939
Associate Engineer Tool (Contract) (Job Number: 19032843)

Number of Openings: 1

Location(s): United States


Shift: 1st Shift

Target Start Date: Jan 6, 2020

Target End Date: Jan 1, 2021

Pay rate: $33.00
Number of openings: 1
Assignment Duration: Up to 1 year
Location: El Segundo, CA
Work schedule: 9/80

Aerospace Sector is looking for an Associate Tool Engineer I (contract) for tool design across multiple programs. Your work will play a critical role in the company’s mission of preserving freedom and advancing human discovery.

Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation’s history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We continue to innovate with developments from launching the first commercial flight to space, to discovering the early beginnings of the universe. Our employees are not only part of history, they’re making history.

In this role, the selected candidate designs industrial machinery and equipment, tools, dies, gauges, jigs, fixtures, and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements.


Basic Qualifications:

Bachelor's Degree in Science STEM (Science, Technology, Engineering, or Math)
CATIA/NX experience (or other CAD software)



Preferred Qualifications:

Proficiency with CATIA/NX or other CAD software
 
Job Number: JK-1816ATO
Job Location: El Segundo, CA
Rate: 33/hr max
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
****Candidate can start without a Secret Clearance, but must be able to obtain a Secret Clearance ****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Basic Qualifications:
1. Bachelor's degree in Aerospace Engineering, System Engineering, Computer Science, Electrical Engineering, Mechanical Engineering or related technical degree.
2. Experience working electro-optic (EO) systems.

Desired Skills:
1. Active F-22 Project Clearance desired.
2. The selected candidate will be assigned to the F-16/F-22 Integrated Fighter Group's (IFG) Sensors & Weapons team supporting the integration of electro-optic (EO) systems--including targeting, reconnaissance, and terrain-following pods--on F-16 aircraft.
3. The candidate will assist in the development, integration, and testing of said systems as well as develop test procedures and document interfaces.
4. The selected candidate will interface and coordinate with suppliers, program management, and other subsystem engineers to support program cost, schedule, quality, technical goals, and requirements.
5. The selected candidate will also participate in solving technical problems, subcontract planning, and risk management.

Education:
1. Level 1: BS+0-3 YRS
 
Job Number: 11703
Job Location: Fort Worth, TX
Rate: $67.21/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Buyer/Planner

Description:
Buyer/Planner

Fort Worth, TX
$30.06/hr
2 year W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION**

Description:
The Buyer/Planner is a professional responsible for all tactical operations supply chain functions in support of the business unit, including; demand validation, purchase order (p.o.) creation, p.o management, and delivery assurance and exception message management.
Operations Buyer/Planner will actively participate in the Production operations of the Fort Worth manufacturing facility. Some of the primary responsibilities of this position include:
o Support production initiatives around standard work
o Creation and deployment of Production line standard work for new utility positions
o Training documentation for new processes implementation
o Development and support of Production training of operations

Other Responsibilities:
* Ensure uninterrupted flow of material to support manufacturing and customer OTD
* Review purchase requisitions against the master production schedule to validate demand
* Create p.o. in accordance with requisitions and contractual requirements
* Expedite material as needed; negotiating and working changes within supply base through the Change Board process
* Ensure inventory goals and objectives are met
* Negotiate with suppliers as required for reschedules in support of inventory and business objectives
* Assist the Supplier Performance evaluation process
* Interface with Supplier Quality personnel to ensure supplier performance Basic Qualifications:
* Developed professional able to work with minimum guidance
* Has significant knowledge of the discipline and role
* Expertise in MRP systems, preferably SAP with understanding of Procurement parameters and usage
* Can identify risks that affect supply and delivery
This position is for professionals with credentials in Supply Chain\Production Planning with three to five years of experience.

Education:
BS or equivalent experience w/ 3+ years' experience in supply chain/Production Control preferably in the aerospace industry. Pay is commensurate with education/experience.
 
Job Number: 11849
Job Location: Fort Worth, TX
Rate: 30.06
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CAD - Engineer

Description:
Provide Engineering support for Core Stage 1/Stage 2 Creo and Creo Tools to include the following:
• Pro/Design Assembly, Detail, Cabling, Diagram & Manufacturing and surface modeling.
• Support in Windchill 9.0, Intralink, and PDM document management tools to meet stringent configuration management requirements per NASA and Aerospace standards.
• Support plans, schedules, conducts/coordinates detailed phases of the engineering or scientific work in a project, or perform work that involves conventional engineering or scientific practices. Typical work may include research, development, design, testing, logistics, analysis, production, maintenance, operation, planning, estimating, application, or standardization of engineering facilities, systems, structures, software applications, firmware, processes equipment, devices, or materials.
• Tools shall include Creo 4.0/5.0: machine, model design, Checker & updates with Top/Down large assembly experience, especially with simplified rep. family tables, skeleton/shrink wrap which allows for the efficient opening of large Creo models (with several thousand parts or more).
• Technical Check of design products

Candidate must be a U.S. Citizen.
This is a 2 month assignment with possible extensions
 
Job Number: 19-254
Job Location: Huntsville, AL
Rate: 62-92 hourly
Per Diem: yes
Overtime: possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: P O BOX 965280
2886 SANDY PLAINS RD

City, State: MARIETTA, GA 30066
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CAD Designer - Aerospace and Defense

Description:
Ingenium Technologies - Rockford, IL





Additional Job Postings: http://www.ingeniumtech.com/tech_staffing/



A large aerospace company is currently seeking several CAD Designers to produce a 3-D model and 2-D layout drawings of the product to meet both engineering and customer requirements.



Responsibilities will include but not be limited to:

Create Proposal Outlines and Layouts for customers.

Create Proposal Envelope Solids in customer preferred formats.

Work with engineering for initial 2D concept of product.

Create solid model piece parts and housings in NX.

Perform tolerance stack-up analysis to ensure correct fit and alignment

Create assemblies in NX.

Create Layout and Balloon Sheets.

Create Layout Parts List.

Create dimensioned detail component drawings.

Investigate and improve, with engineering, current product design issues.

Support and participate in engineering design reviews

Required Software: Siemens NX, Drafting and PDM tools



Required Experience:

5-10 years experience in mechanical design with significant experience using NX
5-10 years experience in detailing design and related manufacturing methods are required
Some manufacturing experience is desirable especially related to machining, assembly and other traditional manufacturing processes
FEA knowledge with ANSYS is desirable
Required Education:

HS Diploma and/or technical certification required
Associates or Bachelor's degree preferred
Position: Long Term Contract



Location: Rockford, IL



Employment Criteria: This position includes access or potential access to ITAR technical data. Therefore, candidates will need to qualify as a US Person which is defined as a US Citizen, a Permanent Resident who does not work for a foreign company/foreign government/foreign governmental agency or organization, or a political asylee in compliance with International Traffic in Arms Regulations.



Employment Statement: Ingenium Technologies is an equal opportunity employer and does not discriminate on the basis of race, color, religion, sex, age, national origin, disability, veteran status, sexual orientation or any other classification protected by federal, state or local law. Proof of eligibility for employment will be required upon employment.



Due to the requirements of the Customer, No Visa sponsorship is available.
 
Job Number: 245740
Job Location: Rockford, IL
Rate: open
Per Diem: yes
Overtime: yes
Duration: 1 yr
Start Date: asap
Input Date: 11/14/2020
Firm Name: INGENIUM TECHNOLOGY
Attention: Alvin Adeva
Address: 4216 MARAY DR UNIT A1
City, State: ROCKFORD, IL 61107
Phone: 815/315-9273
Fax Phone: 815/399-8804
Website: www.ingeniumtech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Machinist - Mills/Lathes - 3rd Shift

Description:
JSG is looking for a CNC Machinist - Mills/Lathes to work at one of our premier Aerospace Clients in Simi Valley, CA.

3rd Shift
9:00pm - 5:00am

Position Summary:

The candidate will be required to set-up, operate, and adjust CNC machines, Lathes and/or Mills. Work from drawings and written instructions to create parts. May need to make offsets to programs on CNC Machines.

Job Responsibilities:

Responsible for all phases of part operations maintains part conformance per sketch and drawing requirements.
Perform and maintain accurate in-process quality inspection and records.
Identify and recommend process improvements that reduce part quality variation.
Input data into visual management forms and convey results to management.
Continuously improve processes, procedures, and eliminate waste.

Qualifications

3-5 years experience operating CNC Lathes and/or Mills
Skilled in the use of indicator, gage, dial bores, and plate inspection methods for first article and in-process inspection of precision machined parts.
Ability to maintain close tolerances (within .0003”), hold .0003 profile, roundness.
The ideal candidate will have experience with AS9100, 5S, Lean, and Six Sigma
Per ITAR requirements, must be a US Citizen or Permanent Resident Card Holder)
 
Job Number: 375510
Job Location: Simi Valley, Ca.
Per Diem: No
Overtime: Possibly
Duration: Temp/Direct
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Machinist- Mills/Lathes, 2nd Shift

Description:
JSG is looking for a CNC Machinist - Mills/Lathes to work at one of our premier Aerospace Clients in Simi Valley, CA.

2nd Shift Hours: 3:30pm - 11pm

Position Summary:

The candidate will be required to set-up, operate, and adjust CNC machines, Lathes and/or Mills. Work from drawings and written instructions to create parts. May need to make offsets to programs on CNC Machines.

Job Responsibilities:

Responsible for all phases of part operations maintains part conformance per sketch and drawing requirements.
Perform and maintain accurate in-process quality inspection and records.
Identify and recommend process improvements that reduce part quality variation.
Input data into visual management forms and convey results to management.
Continuously improve processes, procedures, and eliminate waste.
Qualifications

3-5 years experience operating CNC Lathes and/or Mills
Skilled in the use of indicator, gage, dial bores, and plate inspection methods for first article and in-process inspection of precision machined parts.
Ability to maintain close tolerances (within .0003”), hold .0003 profile, roundness.
The ideal candidate will have experience with AS9100, 5S, Lean, and Six Sigma
Per ITAR requirements, must be a US Citizen or Permanent Resident Card Holder)
 
Job Number: 373614
Job Location: Simi Valley, Ca.
Per Diem: No
Overtime: possibly
Duration: Temp/Direct
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Machinists - 2nd and 3rd shift positions

Description:
Johnson Service Group (JSG) is teamed with a leader in the aerospace, defense, and commercial markets. Immediate fulltime/direct hire 2nd and 3rd shift position for experienced CNC Machinists.

Scope of Experience and Responsibilities:

2-5+ years of conventional and/or CNC mills, lathes and tree mills experience.
Experience with Mori Seiki Mills, Haas Lathes/Mills, Bridgeport Mills, CNC Lathes and/or similar systems.
MasterCAM experience is a plus.
Able to work from blueprints and similar documentation.
Experience with tooling and able to run small production work.
Monitor and maintain the condition of cutting tools.
Utilize computer programs to enter part data (i.e. serial number), log time, look up instructions and blueprints and download programs.
Work from instructions, set-up sheets, and method documents to correctly set up machines and inspect machined parts.
Prefer experience with precision/close tolerance parts.
Knowledge of basic inspection techniques.
Ability to use micrometers, functional and cylindrical gauges, comparators, indicator setups, calibration stickers, and scales is a plus.
Knowledge of Geometric Dimensioning and Tolerancing (GD&T) is a plus.
Education: High school diploma or equivalent required.
Shift: 2nd and 3rd Shift positions

Type of employment: Direct hire positions with excellent benefits
 
Job Number: 375840
Job Location: Santa Clarita, Ca.
Per Diem: No
Overtime: Possibly
Duration: Direct
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Chemical Technician

Description:
2nd and 3rd shift opportunities in Phoenix for chemical technicians. Pay rate is negotiable.

Essential duties:

Processes stainless steel and aluminum parts for the Semiconductor and Aerospace industries utilizing automated and manual process lines.

Ensures waste treatment and environmental compliance using established methods of chemistry.

Assists in equipment maintenance as required.

Must be able to follow written, oral direction and demonstrated procedures involving the safe and logical transfer of liquid and solid chemicals used in metal finishing.



Education and Experience:

High school education or GED equivalent.

Must have basic computer skills.

Ideal candidates have 3+ years experience in metal finishing processes such as cleaning, anodization, plating etc.






Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-43045
Job Location: Phoenix, AZ
Rate: 18.0USD/Hour
Per Diem: --
Overtime: --
Start Date: 2019-10-16 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Camille Hannes
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Structural Design Engineer Openings

Description:
Design and configuration of composite primary aircraft structure.
Experience during preliminary/conceptual design phase required.
Support of subsystems integration and packaging into primary structure.
Strong knowledge and understanding of latest structural design, as well as manufacturing trends in the Aerospace industry.
Analyze the applicability of new and emerging technologies and advanced techniques.
Serve as a design focal between the program and Tier 1 suppliers.
Provide technical support in design and development of the preliminary structures layout that meets weight, cost, manufacture-ability and certification requirements.
Support new business development, trade studies and proposal activities.
Support technical review of supplier capabilities and progress.

Requirements:
Must be a US or Canadian citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772.
Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure / confidentiality agreement with current or any former employer that would prevent you from fully performing the duties of the position.
Must have a bachelor’s degree in Aerospace or Mechanical Engineering, or similarly related area.
8+ years of experience in performing design of large aerospace structures.
Strong composite structural design background.
Proficiency with CATIA V5 and Teamcenter PLM is preferred.
Knowledge of the conceptual and preliminary design phases of aircraft development is strongly preferred.
Thorough understanding of the structural design requirements for Part 25 certification is preferred.
Highly self-motivated with a strong bias for action, and excellent problem-solving skills across multi-disciplinary skill sets.

The Structures Company, LLC is an AA/EOE.
 
Job Location: Reno, NV
Rate: Open
Per Diem: Yes
Overtime: Possible
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Technician (20+ openings)

Description:
Job Description
Come work for a great company with great benefits! We need guys for all shifts (weekends, nights, days, holidays). Six to eight-month contract with the potential of converting to a permanent employee. Aerospace experience preferred.
Composites fabrication & sub-assembly:
• Fabrication of parts using wet layup and pre-impregnated composite materials
• Knowledge of properly preparing tooling for layup (Clean, seal, release)
• Placement and consolidation of composite materials in tooling
• Grinding, cutting, and trimming of parts
• Working knowledge of composite specific equipment including ovens, Gerber cutting machines, and Virtek laser computers.
• Bonding composite structures
• Hand-finishing parts to proper fitment
• Wet layup with multiple resin systems and fabrics
• Locating parts and creating fixtures to blueprints and / or engineering instructions
• Attention to detail and ability to self-inspect work to ensure quality defects are mitigated
Required:
• 3+ years of experience with composites or aircraft fabrication and assembly preferred.
• Flexible to work overtime/modified/Non-standard shifts preferred
• 5S/FOD/Tool control programs mandatory
• Ability to perform repairs on composite structures
• Experienced with quality inspection points and process documentation.
• Knowledge of resins, mixing, ratios, and paste mixes.
Physical Requirements
• Must be able to stand for extended periods – 8 hours min.
• Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces.
• Physically able to handle items weighing up to 40lbs (unassisted).
• Working in confined spaces
• Working on Elevated Platforms
Job Type: Full-time
Salary: $16.00 to $45.00 /hour
 
Job Location: Mojave, CA
Rate: 16-40/hr
Per Diem: Yes
Overtime: Possible
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Creative & Business Writer - Aerospace Experience

Description:
JSG is hiring a Creative & Business Writer for a 2-year contract in Huntsville, AL!

Description:

Writes, rewrites and edits technical documents such as Illustrated Parts Breakdown / RPSTL, technical publications to communicate clearly and effectively technical specifications.
Acquires subject knowledge by interviewing product developers, observing the performance of production methods, referring to technical specifications, blueprints, engineering illustrations, and trade journals.
Oversees preparation of illustrative materials, selecting drawings, sketches, diagrams, and charts. Conducts quality review of materials.
Required Experience/Knowledge:

Bachelors’ Degree from an accredited college in a related discipline w/ 6 years of professional experience, or Masters’ degree w/ 4 years of professional experience.
Equivalent experience/combined education will be considered
Candidate must be knowledgeable of US Army UH60 A/L/M. Knowledge of MIL-STDs 40051B, 40051C and 40051-1C.
Source matter expert on UH/HH-60 Blackhawk.
Working knowledge of editing XML.
Experience with MIL-STDs 40051B, 40051C and 40051-1C.
US Citizenship is a requirement
Ability to oversee multiple projects of varied size and scope.
Effective communications skills (both written and oral). Able to think and operate independently and possess strong organizational skills.
 
Job Number: 375756
Job Location: Huntsville, AL.
Per Diem: Possibly
Overtime: Possibly
Duration: 2 years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Customer Sales Demand/Forecasting Manager - Aerospace Experience

Description:
Johnson Service Group (JSG) is teamed with a global leader in the aerospace, defense and commercial markets who is seeking a talented Customer Sales Demand/Forecasting Manager to determine future sales forecasts as well as resources and material.

Scope of Experience and Responsibilities:

2-3+ years of related sales, planning and/or manufacturing experience, preferably in the Aerospace/Defense industries.
Will monitor and analyze data to support forecasting, order entry, order delivery, etc.
Responsible for communicating forecasting requirements to supply chain/planning input in developing a Demand Forecast.
Provide reports Demand Review Meetings, including: Actual to Sales Plan; Profit Plan/Forecast; Bookings analysis and Forecast QDRC metrics.
Provide necessary data for reports for BTO, including: Analyze variances of forecast from prior month; Analyze major adjustments and Reconcile differences in forecast vs. actual orders.
Provides Supply Difference Report and reconcile differences in forecast vs. actual orders, per the planning department.
Daily/weekly actions to manage, develop and maintain forecast assumptions for Sales Operations Planning (S&OP) process.
Distribute weekly customer shipment report and bookings and month-end customer shipment/bookings reports.
Maintain forecasting for new products review and communicate details by item and product code to the Master Scheduler team.
Strong written and verbal communication skills.
Highly proficient with MS Office Suite, including Word, and Excel.
Experience with data mining tool such as Monarch, and a report writer (i.e. Business Objects).
SAP or similar ERP system experience is preferred.
Experience with ADAM forecasting tool (is a plus) for reports for demand data.
Education: Two year Associates Degree in Business or a similar discipline is a plus.

Duration: Direct Hire

Compensation: Highly competitive compensation with excellent benefits
 
Job Number: 374938
Job Location: Los Angeles, Ca.
Per Diem: No
Overtime: Possibly
Duration: Direct
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Drive Systems Design Engineer

Description:
Drive Systems Design Engineer


Summary:

The Drive System Design Engineer is responsible for design activities related to preparation and release of engineering data for complex mechanical components including gears, bearings, shafts, housings and other supporting components as well as subsystem integration. This role supports the manufacturing, assembly and validation of these mechanical components and ensures compliance with all best practices, customer and industry specifications in support of air vehicle performance and safety requirements.


Position Responsibilities:

Create detail, assembly and installation drive system design definition in the form of 2D and 3D technical data utilizing CAD software and various analytical tools.
Support manufacturing and testing of drive system components and sub-systems interpreting technical data and assisting in product improvements.
Improve detail, assembly and installation drive system design definition in the form of 2D and 3D technical data utilizing CAD software and PLM software.
Participate in a cross functional team environment completing a variety of objectives depending on the program lifecycle assigned.
Advance the state-of-the-art drive system through creative thought, personal and team research, technical compliance and strong analysis skills.
Qualifications:

Mechanical design experience with 2D/3D modeling, requirement capture and specification development is required.
Experience working in an aerospace or automotive environment, focused on mechanical components such as gears, bearings, shafting, etc. is required.
Experience working in a precision manufacturing environment, focused on mechanical component manufacturing processes such as metal machining, heat treatments, and other specialized processes.
Proficiency with mechanical design computational tools such as various CATIA v6, UG v5, and/or ProE.
Proficiency with Mathcad, Matlab, FEM software (ANSYS, etc.), AB Jones, KIMOS, AGMA related analysis tools, etc.
Proficiency with basic office computer software, specifically the Microsoft office suite (Word, Excel, Powerpoint, Outlook, etc.) is required.
Must have working knowledgeable of GD&T requirements.
Strong analytical ability is required.
Must have demonstrated success working in a team environment and articulating technical data and concepts to a wide audience of individuals of different technical backgrounds.
Must have demonstrated ability to organize and prioritize a variety of activities and tasks while dealing with change.
Previous experience working with PLM software such as ENOVIA to drive product lifecycle is preferred.
Previous experience working on cross functional engineering programs is preferred.
Education Requirements:

Bachelor’s Degree in Mechanical or Aerospace engineering is required.
Other equivalent engineering disciplines will be considered with sufficient applicable experience.
Master’s Degree in the Engineering as described above is preferred.
____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 57715
Job Location: Fort Worth, TX
Rate: negotiable
Per Diem: possible
Overtime: possible
Duration: 12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Becky phone
469-785-4744

Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ECS or Bleed Air Systems Design Engineer

Description:
General Summary:
The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
1. Prepare 3D layout models of the BAS and VCS.
2. Prepare 3D installation and detail models of the BAS and VCS.
3. Prepare 2D installation, assembly and detail drawings of the BAS and VCS.
4. Work in a team environment supporting liaison engineering to research root cause and address production discrepancies.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program with 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.

Knowledge, Skills and Abilities:
1. Experience using CATIA V5 to prepare 3D parametric models and 2D drawings. Minimum of 10,000 hours.
2. Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
3. Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS.




The Structures Company is an AA/EOE.
 
Job Number: 301
Job Location: NC
Rate: $55-$60/Hr - **DOE**
Per Diem: Yes
Overtime: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer ( Ronkonkoma, NY )

Description:
Electrical Engineer ( Ronkonkoma, NY ) 9613193
12 Month Contract

Pay Rate: $50-60/hr

*Job Duties:
- Candidate will be responsible for supporting test program activities in the Aerospace Propulsion Laboratory.
- Under the direction of senior engineering, the individual will be responsible performing a variety of basic engineering tasks associated with the analysis, design, or testing of electronic and data acquisition systems as well as developing, creating and modifying computer applications software.
- Effectively communicate and portray design approach and functionality to other team members and lab users.
- Apply theoretical knowledge and engineering technical principles under the guidance of senior engineers to solve basic electrical engineering problems.
- Create block diagrams, wiring diagrams, interconnect diagrams, and detailed assemblies.
- Prepare and present preliminary, critical and test readiness reviews in support of test programs.
- Development, integration, and documentation of laboratory systems, electrical cable designs and electrical assemblies for test facility.
- Design, integrate, and troubleshoot electrical designs of a functional system including commercial off the shelf (COTS) electro-mechanical components such as connectors, relays, switches, circuit breakers, etc.
- Test procedure, script development and execution at the system level.
- Support test rig/hardware installation, instrumentation, test execution and troubleshooting.
- Establish requirements and procedures to evaluate purchased equipment or EEE parts. Under supervision, supports the testing and/or evaluation/ validation of one or more elements of an electrical.
- Assist with the development of review material, reports, documenting and presenting findings.

*Education Requirements:
- BS in Electrical Engineering & 2 years, OR Master’s Degree in Electrical Engineering.//
 
Job Number: 9613193
Job Location: Ronkonkoma, NY
Rate: 50-60
Per Diem: Yes
Overtime: yes
Duration: 12 Month
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - A220

Description:
Responsible to manage non-conformity/concessions and late changes to support production and to update the master data for the documentation package that accompanies the aircraft. Responds to technical questions, prepares new modifications for country specific constraints and explains about work orders and drawings, especially for aircraft (A/C) mechanical related items. Establishes and maintains effective communications with FAL production. Responsible for on-site training of new manufacturing engineering employees.
Qualifications/Basic Job Requirements:
The incumbent should have 5 years of relevant experience, preferably in manufacturing engineering of structure installations in an international aviation company.
Knowledge of the principles, practices, methods and tools used in manufacturing engineering.
Knowledge about non conformities/concessions and design query notes.
Knowledge of supply chain management.
Knowledge of quality management system.
Good knowledge of basic written and spoken English.
Experience working with A220 Aircraft
Education/Special Qualifications:
Must have a degree in Industrial Engineering, Mechanical Engineering or Aerospace Engineering or an equivalent combination of education and experience.
Other desirable skills and experience include:
Knowledge of Airbus Industries mechanical process & methods.
Knowledge of Airbus IT-Tools (TiCon, Zamiz, TAKSY, MODA, DocMaster, Adress).
Knowledge of common applications such as SAP/R3 (Module PP/PM).
Familiarity with the American aviation market.
Aircraft Technician experience from A/C manufacturer.
Knowledge about aircraft structure installation.
Knowledge of rules for aircraft design and manufacturing.
Intercultural experience.
Knowledge of health, safety and environmental regulations and practices.
 
Job Number: 1240535
Job Location: Mobile, AL
Rate: TBD
Per Diem: yes
Overtime: possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: P O BOX 965280
2886 SANDY PLAINS RD

City, State: MARIETTA, GA 30066
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer RF ( South Magna UT ) S9244486 and S9244486

Description:
Electrical Engineer RF ( South Magna UT ) S9244486 and S9244486
12 Month Contract

Pay Rate: $60-65/hr W2

Required: • Active Secret DoD Clearance within 5 ½ years of last investigation

This position will support electromagnetics and radio frequency (RF) testing. Working knowledge of RF testing of structures, antennas, radomes, and other aerospace related components is a must. The qualified applicant shall be able to perform data analysis and present findings to program engineering teams, be able to author or review RF test plans, and provide input to test fixture design, manufacturing, and set-up. Daily communication with management staff, program/Integrated Product Team (IPT) members, and customers is expected.

Requirements & Qualifications:
• Active Secret DoD Clearance within 5 ½ years of last investigation

B.S. in Electrical Engineering (ABET), specializing in RF / Electromagnetics; M.S. is desirable
o Minimum 5 years with B.S. or related experience, 3 years with M.S.
o Relevant experience in aerospace industry, with experience in testing and analysis of structures, conformal antennas/apertures, arrays, and Radomes
o Solid background in electromagnetics
o Working experience with test and evaluation of microwave devices
o Verification of antenna, radome, and structure performance through prototype fabrication, integration into test fixture(s), and testing
o Experience with commercial data analysis software, such as Knowbell and/or Pioneer o Familiarity with Computational Electromagnetic (CEM) tools
o Willingness to work cooperatively in a team
o Proficient in MS Office suite oExperience fostering and leading in a culture of continuous improvement
oExcellent verbal and written communication skills

Desired Skills and Experience:
• Working experience within various anechoic test chambers
• Ability to create software algorithms for design, optimization, and data analysis using tools such as MATLAB or FORTRAN
• Proficiency with Computational Electromagnetic (CEM) codes such as HFSS, FEKO, PMM, XPATCH, RAM2D, etc
 
Job Number: S9244486
Job Location: Magna, UT
Rate: Open
Per Diem: no
Overtime: yes
Duration: 12 months
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer with Active Secret Clearance

Description:
Electrical Engineer

Location: Lexington, KY

6 month contract

Active Secret Clearance required. 


Ideal candidate will have BS+6-10 years of experience or MS+ 4-8 years of experience. 

The Electrical Engineer will research, develop, design, and test electrical components, equipment, systems, and networks. Designs electrical equipment, facilities, components, products, and systems for commercial, industrial, and domestic purposes. The applicant will be focused on the electrical wiring and harness assembly diagram design and development. Duties include creating wiring diagrams and harness assembly diagrams, resolving wiring/integration related issues between the various avionics/electrical systems, validating/interpreting/troubleshooting/resolving any wiring related issues, performing technical checks to ensure wiring document correctness, providing engineering sign-off on all new/revised C-5 manufacturing wiring documents (Wire Routing Documents (WRDs), Termination Aids (TAs) and Wire Harness Master (WHM) sketches).

Candidate will be part of a team effort to develop C-5 wiring from design to installation, to include liaisoning between C-5 Avionics Wiring Design and Production/Manufacturing to ensure wiring requirements flow from design to installation are processed in accordance to specifications.



____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 58182
Job Location: Lexington, KY
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6 months
Start Date: 11/11/19
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Engineer

Description:
The Senior Engineer Electrical Systems performs a variety of engineering work including design, analysis, substantiation, certification, drawing interpretation and project management related to transport category aircraft. Provides (or may provide) senior level engineering drawings related to electrical systems and components in support of VIP aircraft completions.

EXAMPLES OF ESSENTIAL JOB FUNCTIONS:
1. Design and analyze electrical systems and components, typically in support aircraft interior modifications and avionics upgrades (STC projects).
2. Prepare electrical engineering reports, Engineering Authorization (EAs), drawings, analysis, and test plans.
3. Develop cabin electrical modification/installation work instruction, procedures and recommendations.
4. Coordinate and monitor electrical aspects of project schedule with project managers.
5. Monitor and support electrical kit development and parts suppliers (internal and external).
6. Support electrical aspects of proposal development. 7. Coordinate with foreign and domestic approval authorities and their representatives for any necessary assistance and/or approvals.
8. Work within engineering team to delegate and assign work to appropriate team members.
9. Applies area of specialty to design, develop and implement creative and innovative solutions to difficult problems.
10. Reviews progress with management and recommends corrective action along with review of alternatives. 11. Performs other duties as assigned.

MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
1. Bachelor’s Degree in Electrical/Aerospace Engineering.
2. 8+ years of experience in Aviation Electrical Engineering.
3. 4+ years of experience with aircraft electrical systems and wiring diagrams
4. Familiarity with the Supplemental Type Certificate (STC) process, OEM documentation, and working with DERs

REQUIRED SKILLS AND ABILITIES:
1. Proficient with Microsoft Visio.
2. Proficient with Microsoft Word, Excel, PowerPoint, Outlook, and Internet Explorer.
3. Knowledge of MS Databases (SQL or Microsoft Access) preferred. 4. Aviation background and electrical/avionics experience.
5. Knowledge of industry design and documentation standards.
6. Experience with electrical assemblies and components.
7. Ability to coach and motivate team of engineers.
8. Ability to work independently and cross-functionally.
9. Budget and project management experience.
10. Experience leading employees/teams in productive and efficient manner.
11. Requires in-depth knowledge of applicable regulatory agency requirements and discern how a design may be influenced by them. 12. Requires reasoning/analytical skills to creatively design and problem solve.
13. Strong communication and problem-solving skills.
14. Strong time-management and organizational skills.


The Structures Company is an AA/EOE.
 
Job Number: 343
Job Location: IN
Rate: $57/Hr. **DOE**
Per Diem: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electromagnetic Environmental Effects Engineer

Description:
Electromagnetic Environmental Effects Engineer

Location: Fort Worth, TX




The Electromagnetic Environmental Effects (E3) Engineer is responsible for developing, managing and communicating the E3 methodology to internal and external customers.




Position Responsibilities:
• Applies engineering principles to investigate, analyze, plan, design, develop, implement, test, and evaluate air vehicle, weapons, and avionics with respect to E3 systems engineering.
• Develops and communicates E3 approach and methodology to management.
• Determines System level E3 targets and work with IPTs to develop IPT level targets.
• Performs air vehicle and systems level analyses to verify performance.
• Plans, supports, and leads E3 testing to meet qualification requirements.
• Works closely with IPTs to review evolving design and provide E3 input into their decisions, providing E3 impacts to all Design Decision Notices.
• Tracks, designs and develops E3 estimates based on preliminary and detail design layouts.
• Suggests design improvements / spiral opportunities to improve E3 performance.



Education Requirements:
• Bachelor's Degree in Engineering is required. Major in Electrical Engineering is preferred.
• Major in Aerospace Engineering or Mechanical Engineering may be considered with sufficient experience.
• Masters Degree is preferred.

Position Requirements:
• At least 9 years of E3 experience on airborne platforms.
• Expertise in aerospace design and verification processes to include requirements development and verification.
• Skilled in preliminary and detailed design
• Proficiency with MRP, Planning, Manufacturing is strongly preferred.
• Must have the ability to communicate efficiently and effectively to coordinate E3 activities, prioritize tasks, and report status.
• Must be able to build and maintain effective relationships with customers, internal
• and external suppliers, as well as horizontal integrations across the other teams.
• PC proficiency in Microsoft Word, Excel, PowerPoint, and Outlook is required.
• Must have the ability to work effectively within a team.
• Good interpersonal and organizational skills are required.



EEO Statement Textron is committed to providing Equal Opportunity in Employment, to all applicants and employees regardless of, race, color, religion, gender, age, national origin, military status, veteran status, handicap, physical or mental disability, sexual orientation, gender identity, genetic information or any other characteristic protected by law.



This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR) and/or the Export Administration Regulations (EAR)., Non-U.S. persons selected must meet eligibility requirements for access to export-restricted information. , The ITAR/EAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee.






____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 58193
Job Location: Shelton, CT
Per Diem: Possible
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: David Surreira
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer

Description:
Embedded Software Engineer

Location: Palm Bay, FL

Integration of complex designs in small teams to ensure proper system functionality in an avionics environment.
Job Responsibilities include the following:

Communicate with leadership on status, issues, milestones, and successes


Qualifications:
C/C++ embedded systems developer
Embedded software fundamentals and the ability to code, integrate, and troubleshoot complex designs
Ability to work well across multiple engineering disciplines
Linux Kernel/Device drivers
Understanding of graphics processing and video mixing


Preferred Qualifications:
Knowledgeable of safety-critical software development / DO-178 or similar industry standards
Experience on complex systems with a focus on mission computing, memory systems, and/or displays
Intel x86/ARM/FPGA/SoC
1394, 1553
Software/Hardware co-design
Experience with LynxOS
Xilinx Zynq
Network Topology
Communications Protocols
Continuous Integration
____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 58260
Job Location: Palm Bay, FL
Per Diem: Possible
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: David Surreira
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering - Structural Design / aerospace design experience with knowledge of configuration management techniques, drafting/drawing conventions, and aerospace specifications and procedures / Catia V5 - Clearance CA

Description:
166802 Job Title: Engineering - Structural Design

Work Site Address: Palmdale, CA 93599
Job Number: 2582-1
Max Pay Rate: $80.00/hr
Start Date: 12/3/2019
End Date: 1/11/2021
Position Type: Contract


Job Summary:
Primary role is design of structural detail parts, assemblies and installations, but may support equipment and systems installations as well.

Engineer shall be responsible for development of layouts, preparation of engineering drawings and coordination of related activities. Candidate must be able to coordinate efforts with little or no supervision across a wide range of functional organizations such as Planning, Tooling, Stress, M&P, R&M, Manufacturing, and other Installation Design teams (ECS, Hydraulic, Harness, Subsystems) to ensure that designs meet customer and derived requirements. Layouts, studies, new drawings, revised existing drawings, and ECNs (Engineering Change Notices) will use Catia V5 and require a strong understanding of GD&T and Interchangeability. Although the primary assignment will be to support retrofit designs, could also support mod line issues, production floor support, and field requests and repairs. The role could include airframe layout, rough sizing, preliminary design, detail design and drawing release.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
Candidate must have aerospace design experience with knowledge of configuration management techniques, drafting/drawing conventions, and aerospace specifications and procedures.

Qty 15 positions
 
Job Number: JE-2582-1S5
Job Location: Palmdale, CA
Rate: 80/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FPGA / RTL Hardware Engineer

Description:
*This is a full time, 1 year contract to hire position located in Nashua, NH*



We are seeking an electronic hardware engineer who will support and develop FPGA/RTL designs from design to system integration (design, test, troubleshoot) for embedded military/aerospace analog/digital/mixed signal multi-layer circuit card assemblies/applications.



Candidate duties will include RTL coding, VHDL synthetization placement and routing. For the work, Xilinx Vivado and possibly Altera, Microsemi, Lattice FPGAs will be used. Candidate will be responsible for their design, update/create the specs, and create the RTL design (from bottom up) or from a leveraged code block. Candidate will make a standalone testbench for the design to test basic functionality before handing it off the Design Verification team for detailed testing. Once complete, the designed product will go to the lab for testing and debugging.



Required:
*10 years of FPGA or ASIC digital circuit design in RTL/VHDL (RTL designers also considered)
*Experience with Source Control Tools/Bug Tracking; experience working in a lab environment
*Experience with lab Integration, debug, root cause analysis, lab tools.
*BSEE or equivalent
*Active Secret Clearance



Pluses:
*Xilinx Vivado Verilog or System Verilog
*Linux, GIT Bug Tracking tool such as GForge or JIRA
*FPGA verification and validation
*Testing of VHDL source code, DSP PCIE
*Serial interfaces (MIL-STD-1553, ARINC-429, RS422, RS485, etc), backplane buses including VME, PCI, PCIE
 
Job Number: 562
Job Location: Nashua, NH
Rate: 80.0
Per Diem: yes split
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Financial Analyst - Aerospace Experience

Description:
Johnson Service Group (JSG) is teamed with a leader in the aerospace, defense, and commercial markets, and we are seeking a talented Financial Analyst to support government accounting, including proposals, pricing, and auditing requirements.

Scope of Experience and Responsibilities:

4-6+ years of related finance/accounting experience in government contracts, subcontracts, estimating and pricing, finance, or business administration in a defense/aerospace manufacturing environment.
Experience with cost, proposal pricing and estimating is required.
Experience in conducting direct and indirect rate audits and working with DCAA and DCMA auditors is required.
Provide cost estimating and Truth in Negotiation Act (TINA) proposals.
Participate in the preparation and submission of Forward Pricing Rate Agreements (FPRP) and the annual incurred cost submission (ICE) to ensure compliance with all applicable regulations (FAR, CAS).
Conduct audits and analysis of subcontractor or supplier proposals.
Conducts fact finding at supplier locations as needed to review basis of estimates and source documentation verifying proposal cost estimates.
Serve as the point of contact with Defense Contract Audit Agency (DCAA) auditors.
Prepares and coordinates responses to DCAA audits and System Reviews.
Strong hands-on understanding of pricing and purchasing theories, concepts and principles.
Will contribute in developing proposals to support new business opportunities with engineering, sales, and program management teams.
Experience in cost/price analysis supporting DoD programs.
Proficient with MS Office, and advanced knowledge of Excel and SAP (or a similar ERP system).
Effective oral and written communication/presentation skills.
Strong analytical, organizational and interpersonal skills.
Ability to communicate effectively with all levels within the organization.
Education:

Bachelor's Degree in Accounting, Finance, Economics, or a related discipline is required.
Master's Degree in Accounting, Business Administration, Finance, Economics, or a related discipline is a plus.
Certifications: Desired certifications include CPA, CMA, CIMA and/or ACCA.
 
Job Number: 375232
Job Location: North Los Angeles, CA.
Per Diem: No
Overtime: Possibly
Duration: Direct
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Controls

Description:
On any given day you might:
• Develop air data systems design, architecture and support product plan development, including qualification and certification plans
• Provide subject matter expert level technical leadership, mentoring and guidance on both practical and theoretical aspects of air data systems
• Define requirements for the air data systems to ensure compliance with regulations and customer requirements
• Research new air data concepts and technologies that fit the Aerion technology roadmap
• Provide validation and verification of air data systems requirements
We're looking for someone who has:
• Bachelor’s Degree in relevant engineering area, with a Master’s degree in a technical and/or management specialty preferred
• 10+ years of deep, hands-on experience in air data and avionics systems development, design and testing in a Military, Commercial, or business aircraft development program
• 8+ years of demonstrated experience specific to air data systems, air data technical principles and technologies, and managing system suppliers as the technical point of contact
• In-depth and current knowledge of Part 25 regulatory requirements, including air data specific certification requirements (e.g. RVSM)
• Experience and expertise in the development of commercial and/or high-end business jets strongly desired, including flight test experience
• Recent experience in developing air data, avionics and other aircraft systems, such as Automatic Flight Control System (AFCS), from concept through certification strongly desired
• Optical air data systems experience desired
• Demonstrated ability to understand & define requirements, generate architecture, and achieve compliance
We want to build a company around people who are:
• Highly self-motivated with a strong bias for action
• Effective at nurturing strong professional relationships
• Committed to fostering a culture of empowerment & creativity
We want to build a team around people who are:
• Highly self-motivated with a strong bias for action
• Effective at nurturing strong professional relationships
• Committed to fostering a culture of empowerment & creativity
Let's Build a Company Together
We're looking for people from scrappy startups, established corporations, and everything in between. Bring your ideas and experiences, be ready to innovate and learn, and together we'll revolutionize the aerospace industry!
 
Job Number: 1
Job Location: Reno, NV
Per Diem: Split
Overtime: Possible
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Design Engineer

Description:
The Engineer, Flight Test position is responsible for the design, development, and coordination equipment to support Flight Test operations.

Duties and Responsibilities:
1. Designs, develops, coordinates, equipment, and Installations, to support Flight Test operations. Typical equipment and installations including ballast, data booms, cockpit displays, antennas, racks, and various transducers (acceleration, pressure, temperature, displacement, etc.).
2. Creates engineering drawings and related documents for soundness, efficiency, and simplicity in design; completeness, clarity, and dimensional accuracy; correctness of materials and processes; conformity to design/drafting standards, design specifications, and practicability; and economy of fabrication, assembly, and installation.
3. Supports fabrication and installation of test equipment.
4. Resolves issues related to design, documentation, procurement, fabrication, and installation.
5. Coordinates designs for Instrumentation Installations.
6. Monitors installation progress for support of upcoming flights.
7. Coordinates aircraft configuration with the Ground Station which will require operational testing out of the Greensboro facility as well as off-site testing as required.
8. Designs structural products and components of products to support Flight Test Instrumentation.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors’ degree in Aerospace Engineering, Electrical Engineering, Engineering Technology other related field preferred.
2. 5 years’ experience in aerospace design and testing.

Knowledge, Skills and Abilities:
1. Proficiency in 3D multiple component designs and 2D fully dimensional and tolerance drawings. CATIA V5, PLM systems, TeamCenter strongly preferred.
2. Strong Microsoft Office Suites (Word, Excel, and PowerPoint) strongly preferred.
3. Strong computer operating systems skills.
4. Excellent oral and written communication skills.
5. Excellent interpersonal skills.
6. Experience with aircraft data acquisition systems.
7. Experience with FAA regulations.
 
Job Number: 28-013
Job Location: Greensboro, NC
Rate: $50 - $60/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fluids Engineer ( Ronkonkoma NY ) 9611440

Description:
Fluids Engineer ( Ronkonkoma NY ) 9611440
12 Month Contract , potential to go direct hire

Pay Rate: $60 /hr , maybe more for the right candidate

*Preferred Requirements:
- A high degree of computer literacy and proficiency with Microsoft Office (Word ,Excel and PowerPoint), familiarity with Microsoft Visio, Microsoft Project, AutoCAD and other drawing packages.
- Understanding of fluid system design, calculations and troubleshooting.
- Must have good communication skills and be able to write and deliver presentations in front of senior management and customers.

*Education Requirements:
- A Masters’ degree in Mechanical Engineering or Aerospace Engineering, OR a Bachelors Mechanical Engineering or Aerospace Engineering with 2 years’ experience.//

*Qualifications:
- Must be able to work effectively in a dynamic laboratory setting with a diverse technical team environment characterized by frequently changing tasks, new priorities and quick responses.
- Comfort with hands on interaction with various test hardware and tooling, instrumentation and facility support piping systems such as Hydrogen, Oxygen and fuel.
- Ability to function as self-starter.
- Strong written and oral communication skills.
- Understanding of engineering fundamentals.
- Familiarity with test requirement identification and evaluation.
- Experience in reading and understanding fluid system schematics, mechanical drawings, and parts lists.
- Experience in the analysis of large datasets.
- Experience test system design, integration and support.
- Experience working in a highly regulated industry with strict customer/process requirements.//

*Job Duties:
- Support fluid system design, P&ID generation, hardware specification and technician support for installation and checkouts.
- Prepare and present preliminary, critical and test readiness reviews in support of test programs
- Test procedure and script development and execution at the system level.
- Support test rig/hardware installation, instrumentation, test execution and troubleshooting.
- Assist with the preparation of test conditions and testing activities
- Assist with post test data analysis and communication of results.
- Assist with the development of review material, reports, documenting and presenting findings.
 
Job Number: 9611440
Job Location: Ronkonkoma, NY
Rate: 60
Per Diem: Yes
Overtime: yes
Duration: 12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Hardware Engineer

Description:
Hardware Engineer

Location: Driftwood, TX

12+ month contract



The primary responsibility of this engineer is the design and development of high-performance RF and microwave products. As a HW Engineer, you will be an integral part of a project team responsible for designing and developing a product from concept to release.

In addition to solid hardware engineering practices, you will be expected to be familiar with a wide variety of sophisticated test equipment, define and execute comprehensive test plans to debug and validate the performance of complicated circuits and modules, as well as develop and implement sophisticated calibration algorithms.

You will also be directly involved in setting specifications and transitioning the product from engineering to production. In this role, you will have the opportunity to develop and to implement automated test platforms, integrating both hardware and software, which are consistent with a high-mix, low-volume, high-tech, and high-quality operation.

Job Responsibilities

Specify, design, and implement complex hardware modules and sub-systems

Design and implement automated test solutions for microwave and RF Products.

Identify and resolve technical problems that often occur during development of new products.

Define and implement project plans, manage milestones, and hold required reviews to assure test system readiness for product release.

Integrate hardware and software to fully support new RF products under development.

Utilize programming skills to develop automated test using LabVIEW

Design measurement algorithms for RF products.

Review and approve product specifications and customer user documentation for the product.

Requirements

B. S. or M.S. in electrical engineering, electronics engineering.

Good understanding of computers and LabVIEW

Passion for learning about and working with test and measurement industry technologies

Strong work ethic and drive to succeed

Preferred skills:

Strong understanding of RF systems, RF measurements, electronics, computers, and high-level programming languages (LabVIEW, TestStand, C/C++, Python)

Familiarity with S-parameter measurements, power accuracy, and digital modulation standards

Knowledgeable about gain, compression, and intermodulation measurements

Sources of measurement errors

Appropriate selection of RF and microwave instrumentation

Statistical analysis of data

Experience with using RF/Microwave Test Instrumentation like Oscilloscope, DMM, Signal Generators, Spectrum Analyzers, Network Analyzers and Power Meters.

Demonstrate ability to:

Work effectively in a group development environment

Effectively diagnose technical issues and propose reasonable solutions

Problem-solve effectively - diagnose technical issues and propose reasonable solutions

Take ownership of goals, project schedules, and milestones

Listen attentively and grasp fast-paced technical conversation

Quickly learn applicable technology, systems and commercial off the shelf components

Adequate knowledge of reading schematics and data sheets for components

Strong documentation and writing skills





____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 57826
Job Location: Driftwood, TX
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12+ months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer ( Clearfield, Utah ) S9244989

Description:
Industrial Engineer ( Clearfield, Utah ) S9244989
4+ Month Contract

Pay rate: $60-75/hr W2

**Candidate must have active secret clearance with last investigation within the last 4.5 years. Candidate will have to obtain SAP Clearance.

Managing schedules and assembly spans Aerospace assembly experience

Top three skills:
• Shop operating plans
• Standard hour development/application
•Capacity/staffing forecasting

Possible Job Duties: • Industrial Engineering accountability will include, but not be limited to the following:
o Manufacturing capacity analysis
o Positional tooling and machine requirements
o Work measurement / time standards development
o Production performance metrics and analysis
o Special studies and projects
o Staffing models
o Production readiness assessments
o Recovery planning
o Facilities and workplace design
o Lean Implementation
o Simulations

Requirements & Qualifications:
• Bachelor’s degree and 4 years’ experience or an MS degree and 2 years’ experience.
• In depth understanding and significant application of Industrial Engineering technical expertise along with a detailed knowledge of other related disciplines
 
Job Number: S9244989
Job Location: Clearfield, UT
Rate: Open
Per Diem: yes
Overtime: yes
Duration: 6 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Lead Systems Engineer

Description:
Lead Systems Engineer

Location: Grand Rapids, MI (49512)

12 month contract

The Lead Systems Engineer will demonstrate development of systems architectures and set technical direction to a small team responsible for development and integration of avionics subsystems onto military aircraft platforms. In this role, you will utilize your experience and expertise to solve problems, develop and execute objectives for self and others, and have the ability to effect short-term and long-term business goals.

8-10 years of experience seems to be the ideal experience for the team. Familiarity of model-based tools and languages is highly desired.


Essential Responsibilities:
• Support the full lifecycle of systems development for avionics products including concept design, system architecture, definition and management of requirements, modeling and simulation, managing suppliers, leading teams, managing cost and schedule, sub-system and aircraft integration, verification, and flight testing
• Interface with customers, partner companies, suppliers, and other senior leadership within the company
• Work as part of an Integrated multi-company Avionics and Sub-System development team to define, develop, verify and qualify an open systems solutions for military application
• Lead and participate in technical reviews of military avionics systems across the business
• Support and coordinate with interfacing organizations such as subsystem avionics product groups and third-party suppliers
• Provide technical support for the system safety and certification processes for military avionics systems
• Lead activities such as; failure Investigations, root causes analysis and implementation of corrective actions, lesson learned, issues and design standards updates
• Provide Engineering support, within one’s specialty, to teams working on performance, cost reduction and quality initiatives
• Protect the Intellectual Property rights of the Company
• Develop and implement training modules as necessary

Qualifications/Requirements:
• Bachelor’s Degree in Engineering, Physics, Chemistry, Mathematics, or Computer Science from an accredited college or university
• Minimum 2 years of technical and/or project leadership experience in Military Avionics Systems or related Product design and development
• Minimum 2 years of experience in Military Avionics Systems and sub-systems requirements definition, design, architecture, integration, verification, and qualification
• Military Rotorcraft experience

Desired Characteristics:
• Model-based systems engineering experience including DoDAF, UML/SysML
• Prior experience in defining architectures and requirements for Military Avionics Systems
• Ability to guide and lead others not in a direct reporting relationship
• Strong technical and project leadership experience in Military Avionics Systems development
• Experience in sub-system requirements definition for mission systems, displays / crew interface systems, navigation sensors and radios, datalink, autoflight systems, on-board maintenance systems, and integrated surveillance systems
• Experience with ARINC 661, ARINC 664 and ARINC 653 development standards
• Experience with DO-178B, DO-254, DO-297, ARP-4754 certification standards
• Experience using models to simulate and validate the system design and architecture
• Familiarity with Systems Engineering processes including requirements definition, aircraft integration, flight testing, system safety, and requirements verification
• Experience in technical and project leadership for large military aircraft programs
• Strong oral and written communication skills
• Strong interpersonal and leadership skills
• Demonstrated ability to analyze and resolve problems
• Ability to document, plan, market, and execute programs
• Demonstrated leadership in advancing the state of the art in a technical specialty





____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 58219
Job Location: Grand Rapids, MI
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12 months
Start Date: 11/11/19
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Liaison Engineer

Description:
POSITION SUMMARY:
The senior liaison engineer performs design updates, documentation and installation tasks on Transport Category Aircraft for Interior Completion STC projects. The engineer will be the functional focal point on large programs. The engineer will be responsible for creating and revising design data in support of cabin monument build and structural modifications to aircraft primary structure for the installation of interior and external components. The engineer interfaces with internal and external partners and suppliers, procurement, and manufacturing in performing these functions.


ESSENTIAL JOB FUNCTIONS:
1. Supports production needs as required when modification questions arise.
2. Addresses complex production issues related to engineering design.
3. Acts as the functional lead on large programs, which require multiple liaison engineers.
4. Revises mechanical designs to aircraft primary or secondary structures for VIP business aircraft.
5. Revises cabin monument designs for VIP cabins.
6. Designs repairs for aircraft structure that are beyond the scope of repair documentation
7. Coordinates with Engineering project leads on redesign efforts
8. Provides guidance and feedback to other engineering personnel.
9. Supports the integration of structural and systems installation components within the aircraft configuration.
10. Ensures designs meet customer criteria, quality standards and FAA requirements.
11. Achieves established metrics for timely resolution of production issues during the program.
12. May represent the department during production meetings.
13. Performs other duties as assigned.


MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
1. Bachelor’s Degree in Aerospace or Mechanical Engineering or the equivalent.
2. Five or more years of experience working in aircraft completions industry on transport category aircraft.

REQUIRED SKILLS AND ABILITIES:
1. Computer Aided Drafting/Design (SolidWorks preferred)
2. Aviation background and aircraft interior experience preferred.
3. Expert knowledge of mechanical design and documentation standards.
4. Ability to work independently and cross-functionally.
5. Strong communication and problem-solving skills.
6. Strong time management and organizational skills.


The Structures Company is an AA/EOE.
 
Job Number: 341
Job Location: IN
Rate: $60-$65/Hr. **DOE**
Per Diem: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Logistics Systems Engineer

Description:
Location: Fort Worth, TX
Rate: $67.41/HR
Duration: 15 month contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

Job Description:
1. This position is part of the Systems Engineering organization at our client.
2. Candidate is needed to fulfill a role in obsolescence management of aircraft components, also known as Diminishing Manufacturing Sources & Material Shortages.
3. Specifically, tasks will support the F-35 program and involve activities needed to mitigate the effects of obsolescence including last-time buys, lifetime buys, and Bill of Material (BOM) monitoring.
4. Additional duties will include inventory management and coordination, review and dispositioning of Supplier Data Requirements Lists (SDRLs), generating and briefing Business Case Analyses (BCAs) for parts buys, and developing Contract Data Requirements Lists (CDRLs) to the Customer.
5. Candidate will be expected to interface and integrate solutions across F-35 Engineering leadership, system/subsystem engineering teams, Supply Chain, Business Management, Program Management, and all associate parties involved in DMSMS for the F-35 program.

Requirements:
1. Experience in DMSMS in the Aerospace Industry
2. Experience in Product Data Management using Teamcenter, Siemens PLM Software portfolio.
3. Experience in Electrical Engineering or Components Engineering with emphasis upon Mission Systems Integration.
4. Experience working with Suppliers and/or Supply Chain engagement.
5. Experience using Microsoft Office tools emphasizing Excel, PowerPoint, and Word.
6. Experience with written, verbal, and presentation communications skills, including briefing to members of upper management.
7. Experience in Systems Engineering disciplines with understanding of the total lifecycle (architecture, requirements, design, analysis, integration, verification, production and sustainment) including the following key competencies: Supplier Interface, Proposal Analysis, Risk and Opportunity Assessment.

Education:
1. Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 11432
Job Location: Fort Worth, TX
Rate: $67.41/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Master Planner

Description:
****Active Secret Clearance highly preferred****

Job Description:
1. This position provides Planning/Scheduling support to meet multiple immediate requirements across our client.
2. Responsibilities include the development and maintenance of components of the Program Integrated Master Schedule, including proposal schedule development, review/support Statement of Work and Basis of Estimate development.
3. The ideal candidate will drive communication and integration across a variety of program functional organizations such as Engineering, Procurement, Contracts, Business Management, Program Management and Manufacturing.
4. Candidate will need knowledge of Critical Path Methodology and be able to apply it in schedule network development and analysis.
5. This candidate will be able to perform complex schedule analysis and develop recommended courses of action to be delivered to internal and external customers.
6. Demonstrate strong communication and interpersonal skills to work in a team environment.
7. Possess ability to prepare status reports, metrics and make presentations as required.
8. Must be outgoing, energetic, self-starter, flexible and demonstrate Program Planning and Scheduling hands on experience.
9. Additional responsibilities will be assigned as required.

Desired Skills:
1. Microsoft Project and/or Open Plan Experience, Milestones Professional Experience, Proven Planning and Scheduling Expertise, Demonstrated Earned value Management System (EVMS) Experience, Proposal Development Experience.


Education:
1. Level 3: BS+9-15 YRS or MS+7-13 YRS
2. Aerospace/Aviation, Program Master Planning/Scheduling Experience (This is not a Maintenance Scheduler position).
3. Candidate must be flexible to work on a variety of assignments and be able to work with other planners/schedulers and internal customer in a fast pace and changing environment.
 
Job Number: 11843
Job Location: Fort Worth, TX
Rate: $48.00 - $75.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 12 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Master Planner

Description:
****Active Secret Clearance highly preferred****

Job Description:
1. This position supports the Planning Implementation Development and Analysis Functional team in the development and delivery of Program Planning capabilities to our clients Business programs and projects.
2. Responsibilities include the development, deployment, and implementation of processes, training, and tools in support of the Program Planning discipline.
3. This position will be an active participant in the evaluation of program planning/scheduling products and practices, and will be instrumental in the resultant remediation activities upon identification of gaps.
4. One-on-one mentoring of planners, formal process and tools training, and leadership of team meetings are techniques that will be employed by this position in order to develop bench strength among the planning community, and to improve planning work products.
5. Demonstrate strong communication and interpersonal skills to work in a team environment.
6. Possess ability to prepare status reports, metrics and make presentations as required.
7. Must be outgoing, energetic, self-starter and have demonstrated Program Planning and Scheduling hands on experience.

Desired Skills:
1. Microsoft Project and/or Open Plan Experience, Milestones Professional Experience, Proven Planning and Scheduling Expertise, Demonstrated Earned Value Management System (EVMS) Experience, DCMA Health Metrics/Data Driven Metrics Knowledge. Aerospace/Aviation, Program Master Planning/Scheduling Experience (This is not a Maintenance Scheduler position).
2. Candidate must be flexible to work on a variety of assignments and be able to work with other planners/schedulers and internal customer in a fast pace and changing environment.
3. Candidates with Secret Clearance are preferred.

Education:
1. Level 3: BS+9-15 YRS or MS+7-13 YRS
2. Aerospace/Aviation, Program Master Planning/Scheduling Experience (This is not a Maintenance Scheduler position).
 
Job Number: 11844
Job Location: Fort Worth, TX
Rate: $48.00 - $75.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 12 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Master Planner

Description:
Location: Palmdale, CA
Rate: $48.86/HR
Duration: 8 month contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last 2 years. The most recent investigation must be completed within the last 5-years****

Job Description:
1. Aerospace/Aviation, Program Master Planning/Scheduling Experience (This is not a Maintenance Scheduler position).
2. Candidate must be flexible to work on a variety of assignments and be able to work with other planners/schedulers and internal customer in a fast pace and changing environment.

Required Skills:
1. Microsoft Project and/or Open Plan Experience.
2. Milestones Professional Experience.
3. Proven Planning and Scheduling Expertise.
4. Proposal and Program Execution Experience.
5. Demonstrated Earned Value Management System (EVMS) Experience.
6. DCMA Schedule Metrics/Data Driven Metrics Knowledge.
7. Schedule Risk Analysis SRA experience.

Education:
1. Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 11150
Job Location: Palmdale, CA
Rate: $48.86/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 8 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Master Planner - no clearance TX

Description:
166820 Job Title: Master Planner

Work Site Address: Fort Worth, TX 76108
Job Number: 2559-1
Max Pay Rate: $75.00/hr
Start Date: 11/12/2019
End Date: 12/18/2020
Position Type: Contract


Job Summary:
This position provides Planning/Scheduling support to meet multiple immediate requirements across Aeronautics Line of Business.

Responsibilities include the development and maintenance of components of the Program Integrated Master Schedule, including proposal schedule development, review/support Statement of Work and Basis of Estimate development. The ideal candidate will drive communication and integration across a variety of program functional organizations such as Engineering, Procurement, Contracts, Business Management, Program Management and Manufacturing. Candidate will need knowledge of Critical Path Methodology and be able to apply it in schedule network development and analysis. This candidate will be able to perform complex schedule analysis and develop recommended courses of action to be delivered to internal and external customers. Demonstrate strong communication and interpersonal skills to work in a team environment. Possess ability to prepare status reports, metrics and make presentations as required. Must be outgoing, energetic, self-starter, flexible and demonstrate Program Planning and Scheduling hands on experience. Additional responsibilities will be assigned as required.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS
Aerospace/Aviation, Program Master Planning/Scheduling Experience (This is not a Maintenance Scheduler position).
Candidate must be flexible to work on a variety of assignments and be able to work with other planners/schedulers and internal customer in a fast pace and changing environment.

Desired Skills: Microsoft Project and/or Open Plan Experience, Milestones Professional Experience, Proven Planning and Scheduling Expertise, Demonstrated Earned value Management System (EVMS) Experience, Proposal Development Experience.

Skills: Category Name Required Importance Experience
Soft Skills Ability to meet deadlines No 9 6 + Years
Soft Skills Analytical Ability No 9 6 + Years
Software Skills MS Excel Advanced No 1 6 + Years
Technical Skills Earned Value Analysis No 1 6 + Years

Qty 2 position
 
Job Number: JE-2559-1
Job Location: Fort Worth, TX
Rate: 75/hr max
Duration: 13 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Material & Process Engineer

Description:
Material & Process Engineer

Location: Centennial, CO
Duration: 6 Months

Description:
This contract labor position is for a mid-level to highly experienced Avionics Parts, Material and Processes (PMP) engineer, with responsibilities to include the following:
- Serve as team member within the Avionics PMP Group - ensuring that PMP review, testing and procurement meet project schedule and budget
- Provide Avionics PMP support to Avionics hardware including EEE piece parts, electrical circuit boards, electrical connectors, electrical box assemblies, batteries, and wire harnessing
- Coordinate with designers to ensure proper PMP selection on heritage and major development programs
- Review drawing packages for material and process selection and compatibility with electrical parts
- Evaluate and approve Part Approval Requests (PAR) using physics of failure based reliability principles, including assignment of suitability for the application, and the intended mission profile environment
- Interface with Avionics suppliers in support of Hardware Design, Manufacturing Processes Reviews, Build Instruction Reviews, and Build Anomaly Reviews

Position Requirements:
- Bachelor of Science degree in Material Science, Electrical Engineering, Physics, or similar applied science or engineering fields
- Current or previous experience with Aerospace Avionics Parts, Material and Processes including electrical piece parts, wire harnesses, and top assembly boxes
- 10+ years of experience
- Demonstrated experience in the resolution of complex part, material, and process anomalies
- Working knowledge of Military and Commercial parts, materials, and process specifications
- Experience working independently and in a team environment
- Experience with Microsoft Office
- Strong communication skills (verbal and written, including presentation skills)

Requires a bachelor’s degree and 10-15 years of experience (for external candidates only). Advanced degrees are typically preferred at this level.

Additional Job Details:
This position is looking for engineer experienced with Avionics/electrical components and EEE piece parts. We are looking for engineering experience with EEE piece part selection, evaluation for mission profile environments, and EEE piece part failure analysis.
 
Job Number: 19-14411
Job Location: Centennial, CO
Per Diem: split
Overtime: possible
Duration: 6 months
Start Date: 12/2/19
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 859 STEPHENSON HWY
City, State: TROY, MI 48083
Phone: 843/955-9221
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Material Program Manager

Description:
** Looking for a candidate with a strong background in aerospace procurement/supply chain, project management, earned value analysis with strong people skills. Commodity focus is in machined parts and electronics. Able to travel nationally at a moments notice with ability to create and present status reports to company leadership. **

Duties:
-The Material Program Manager Specialist will be responsible for managing the performance of suppliers supporting various Programs.
-This candidate will interface with procurement and the engineering community to drive resolution of technical, schedule, and administrative material issues.
-The candidate will be responsible for effectively identifying supplier delivery issues, developing performance improvement strategies, and leading the implementation to support program needs and timely material delivery.
-This position requires frequent travel to various suppliers across the country supporting company Programs.
-This candidate will utilize their background and expertise to communicate between team members, customer counterparts, and suppliers, to provide assurance that the hardware is compliant to purchase order requirements.
-Furthermore, the candidate will be responsible for developing strategic plans to manage the performance of the supplier and integrating the aforementioned team members to successfully execute the plan.
-The candidate should have a minimum basic understanding of typical aerospace processes (machining, welding, NDT, etc) and how they are applied to the hardware being manufactured.

60% - Manage supplier quality and delivery performance, identify delivery issues and coordinate solutions with suppliers, procurement, and engineering. Lead all reviews with suppliers.
30% - Drive corrective and preventative action activity at the supplier, and provide corrective action support to manage timely and effective issue resolution and control.
10% - Act as primary SCMM (Supply Chain/Material Management) interface for customer and management meetings at supplier locations.


Skills:
-Excellent written and oral communication skills required.
-Must be willing and able to travel on a regular basis to support supplier performance and program office delivery requirements.
-Knowledge of Supply Chain practices, procedures and MRP/ERP systems expected.
-The candidate should have a minimum basic understanding of typical aerospace processes (machining, welding, NDT, etc) and how they are applied to the hardware being manufactured.
-This job will require extensive travel - up to 50% travel.
-Knowledge of Oracle ERP systems desired

Education:
-Requires a Bachelor's degree and ten (10) years of directly related experience or an equivalent combination of education and experience.
 
Job Number: 11266
Job Location: Redmond, WA
Rate: $50.00 - $58.50/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Material and Process Engineer

Description:
As M&P/Project Engineer at Evacuation Solutions site, the successful candidate must be comfortable working with minimal guidance and have the ability to communicate training and instruction to the engineering Community.
The engineer should be able to recommend materials and processes, write specifications, ensure compliance of materials with internal, customer, and environmental requirements, conduct failure investigations, write reports, develop and conduct test plans, and support the disposition of materials with quality questions.
The position requires interfacing with internal and external customers as well as suppliers, strong organizational, verbal and written communication skills, and safe lab working practices.

Additional typical M&P/Project Responsibilities may include:
* Collaborates with engineering staff to identify possible chemical or materials engineering related problems.
* Analyzes, researches, and develops materials and their related fabrication and application processes to develop and optimize materials for use in engineering design of and/or application in structures, systems and subsystems.
* Performs material analyses that include, but are not limited to, failure analysis, for parts, systems and subsystems, and definition and requirement specifications.
* Supports the development of project plans, schedules and budgets.
* Execute tasks aligned with the engineering standard work tool.
* May be assigned limited responsibility for managing project obligations, such as management of technical documentation package for a product.
* Manages simple to moderately complex/sized projects including hardware design, testing and processing.
* Supports the development of project plans, schedules and budgets for projects under his/her responsibility to ensure adherence to the established program plan, schedule, and budget.
* Maintains and presents plans and progress reports relating to business aspects of the project(s) to track progress and ensure that established targets are met.
* Identifies and addresses project problems and recommends resolutions to ensure the successful completion of projects.
* Facilitates project tasks with the various functional organizations to ensure alignment with overall project objectives.

Basic Qualifications:
Prior M&P experience preferred.
Mechanical/Aerospace experience preferred.
This individual should be considered a technical professional in the development and regulatory approval of aircraft systems.

Education Requirements:
Bachelors degree from an accredited institution and three years of prior relevant experience. Engineering degree required. Master's degree in Engineering preferred. In the absence of a degree, 7 years of relevant experience is required.
 
Job Number: 51746
Job Location: Phoenix, Az
Duration: 6 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Rick Nussbaum
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

Job Description:
- Designs and oversee the plant or manufacturing systems, fabrication, installation, modification, maintenance, and repair of mechanical equipment such as conveyor systems, production machinery, and other material-handling equipment used in fabrication, assembly, and other production functions; analyzes engineering sketches, specifications and related data, and drawings to determine design factors such as size, shape, and arrangement of parts; oversees the construction of machine and subassemblies considering such specifications as gear ratios, bearing loads, and direction of moving parts; compiles and analyzes test data to determine effect of design on machines in relation to factors such as temperature, pressures, speed, horsepower, and fuel consumption.

Basic Qualifications:
- Experience with 3D parametric modeling and drafting in CATIA or similar tool
- Experience with Teamcenter or similar PDM/PLM software tool
- Demonstrated success working in a team-based environment to meet objectives
- Strong communication and presentation skills, both oral and written
- Experience with Microsoft office suite (Word, Excel, and PowerPoint)
- BS in Mechanical Engineering from an accredited university

Desired skills:
- Familiarity with C-130 or other similar fixed wing or military aircraft
- Experience working in an aerospace environment with exposure to DoD customers
- Experience with ANSI/ASME Y14.100 or similar design and drafting standards
- Familiarity or experience with ASME Y14.5 Geometric Dimensioning and Tolerancing (GD&T)
- Experience designing, or working with, sheet metal and machined components
- Experience with creation, review, and approval of engineering change documentation
- Experience with an engineering change process and/or configuration control process

Education:
- Level 2: BS+3-5 YRS or MS+0-3 YRS
 
Job Number: 11173
Job Location: Lexington, KY
Rate: $50.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Mechanical Design Engineer

Windsor Locks, CT
$48.25/hr
1 year W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
Manages teams and multiple projects in research, design, and development of mechanical applications to the planning, design, development, and testing of mechanical and/or electromechanical systems, instruments, controls, engines, and ground test / mechanical tests. Additionally responsible for the CAD support of design projects and execution of Engineering design changes.

Additional:
The Mechanical Design engineer will be responsible for Mechanical Engineering activities associated with the design, development, and qualification testing of thermal control and environmental life support components and assemblies for various aerospace applications including NASA’s Crew Exploration Vehicle, NASA’s International Space Station as well other aerospace and satellite platforms. This is an individual contributor level position. 8-15 years’ experience desired. The candidate must be a US person. Knowledgeable in Pro-E/CREO modeling fundamentals, stress and fatigue analysis, machine design, and material selection. Previous experience in aerospace structures and engineering fluid component design required. Competence in use of NASTRAN, ANSYS, or simulate stress analysis packages desired. Knowledge of drawings, geometric tolerancing, and drawing interpretation. Experience with manufacturing techniques for limited production hardware. Ability to work within a matrix organization to achieve team and program goals. The successful candidate will possess a positive 'can do' attitude, good presentation skills, respect for others, confidence, and patience.
 
Job Number: 11368
Job Location: Windsor Locks, CT
Rate: 48.25
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
All candidates must meet the minimum requirements to obtain and maintain a secret clearance which requires US citizenship and a clean criminal history.

Major purpose:

Our engineering team consists of a unique blend or designers, analyzers, coders, planners, and managers. We are organized into interdisciplinary teams to solve the challenging technical problems that our diverse customer set provides us.

Successful candidates for Mechanical Engineer will have a demonstrated ability:



• Design modifications for special mission aircraft. Such modifications typically include the addition of antennas, structural modifications including cutting stringers, frames, skin panels, and relocating impacted systems.

• Analyze the impact to the host platform that the design changes cause and use this analysis during the design phase to ensure that the overall impact to airworthiness is minimized.

• Effectively communicate as part of a multi-disciplinary team working together to ensure that the aircraft systems contribute to the overall success of the program.

• Knowledge of the airworthiness process is a must and the ability to iterate design approaches with the cognizant airworthiness authorities is critical.



Education/Experience/Licenses etc.:

2-4 years BS in Aerospace Engineering, Mechanical Engineering or a related field.

0-2 years MS Degree in a related field or have 6 years relevant experience.



We work in the digital age.

Candidates must be comfortable working with standard MS Office tools as well as have demonstrated experience on a Solid Modeling CAD system and Product Lifecycle Management (PLM) system. Demonstrated experience with solid modeling and Engineering drawing preparation in NX 3D CAD system is mandatory.

A working knowledge of FEA and experience with TeamCenter PLM is preferred.

Must have good communication skills and be able to work any shift, weekends and overtime, as required.




Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
 
Job Number: 19-24132
Job Location: Tulsa, OK
Rate: 45.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2020-04-10 00:00:00.0
Start Date: 2019-07-08 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Kevin Lord
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
Duties:
1. Responsible for mechanical design aspects of missile systems and associated ground support equipment.
2. Duties span conceptual design through detailed design technical drawings.
3. Production support activities are also required including engineering change management and non-conformance resolution.

Responsibilities include:
1. Use in depth knowledge of mechanical design and related knowledge of other disciplines to ensure that design completions meet technical requirements.
2. Prepare written presentation materials and technical reports summarizing the engineering design elements.
3. Create mechanical detail design drawings of vehicle structures, component installations, ancillary brackets and adapters in accordance with ASME Y14.5 and published command media.
4. Create concepts that comply with requirements for packaging of missile components, structural airframe, access requirements and concept of operations.
5. Ensure part interchangeability through proper application of tolerance stack-up methods.
6. Peer review design drawings and documents for sound application of mechanical engineering principles and proper application of command media guidelines.
7. Assess non-conformances for root cause / corrective action, provide disposition instructions and prepare Material Review Board materials as required.
8. Prepare engineering change requests as required to support production.
9. Comply with command media requirements regarding business practices and procedures.
10. Maintain subject matter expertise in selected areas relevant to mechanical design of aerospace systems.

Required Skills:
1. Proficiency with PTC’s Creo 2.0, especially with detail part design, and drawing documentation.
2. Ability to develop structural designs including parts of various machining techniques, component placements, and design concepts that conform to requirements documents.
3. Working knowledge of basic material selection, sheet metal design practices, basic machining practices and aerospace hardware selection.
4. Working knowledge of ASME Y14.5-1994 and general drawing standards.
5. Experience with Part List preparation.
6. Experience with engineering change document preparation and impact assessments.
7. Detail-oriented and able to perform Peer Reviews of fellow engineers’ designs and drawings.
8. Ability to manage own time.
9. Excellent written and verbal communication skills.
10. Basic understanding of mechanical analysis concepts desired.

Desired Skills:
1. Basic understanding of mechanical analysis concepts desired.
2. Experience with hands-on engineering support of manufacturing desired.
3. Experience with White Belt training, lean manufacturing, and/or 6-sigma practices desired.

Education:
1. B.S. in a related Engineering discipline or higher
 
Job Number: 11756
Job Location: Orlando, FL
Rate: $40.00 - $50.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 3 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer I / NX – 3 openings AZ

Description:
166858
Job Title: Engineer I (Mechanical Engineer) – 3 openings

Work Site Address: Chandler AZ 85286
Job Number: 9629546
Max Pay Rate: 40/hr
Start Date: 12/2/2019
End Date: 12/1/2020
Position Type: Contract

Job Description:
A Mechanical Engineer level candidate provides support to an assigned program under supervision of a Lead Engineer. Under that supervision, the candidate engineer researches, develops, designs, tests, and documents mechanical structures/components. Maintains and improves designs of existing mechanical components, equipment, and systems for integration. Applies sound principles and techniques of mechanical engineering. Plans, performs, and directs engineering activities to ensure that design, integration, and testing conform to mechanical design specifications and requirements. Will also be responsible for gathering, maintaining, formatting, compiling, and manipulating technical data, such as laboratory or material test results and engineering design changes. Produces engineering documentation, reports, drawings (flow charts, block diagrams, and schematics). Conducts tests and records data to assist with engineering evaluation or analysis.

Qualifications and Education Requirements

Desired experience of 0 to 5 years. BS or MS Mechanical or Aerospace Engineering degree required.



Preferred Skills

Experience with NX 9.0 is a plus.


9-80s Friday - Friday Alternate
 
Job Number: JK-9629546
Job Location: Chandler, AZ
Rate: DOE
Per Diem: pd split possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Engineer - EBU Experience Needed

Description:
Mechanical Systems / Project Engineering experience within the aircraft industry required. Experience with EBU's, Engines and/or Propulsion. Experience integrating wire harnesses, or pneumatics, or Hydraulics, or Ducting, or draining systems into the EBU/Engine. Must have a BS degree. Experience from UTAS/Goodrich/Collins Aerospace would be preferred.



The Structures Company is an AA/EOE.
 
Job Number: 337
Job Location: Tulsa, OK
Rate: $75/Hr.
Per Diem: Yes
Overtime: OT - Some as needed
Duration: 12-18 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Planner Specialist OH

Description:
Planner Specialist

Pay rate range between $25-$30/hr DOE
Working Hours: M-F 40 hours per week. Typically 7:00AM - 4:00PM, but we can be flexible.
Assignment would be from now till the end of the year.

WORK LOCATION: MENTOR OH
Gas Turbine Fuel Systems Division
8940 Tyler Boulevard
Mentor, OH 44060

POSITION SUMMARY

Ensures performance to the master production schedule to achieve division objectives for customer service, inventory levels, and configuration management. Plans, prepares, issues, and controls difficult production schedules and material requirements to ensure a controlled flow of approved materials timed to meet production requirements.


ESSENTIAL FUNCTIONS

1. Determines production priorities by studying master production schedule and customer requirements.

2. Acts as a primary customer contact for matters regarding production status, schedule changes, shipping information, and returned material. May adjust master schedule in response to customer feedback/requirements and manufacturing capacity.

3. Identifies variety of raw material and component requirements for production from engineering and production specifications and schedules of diverse or difficult scope and complexity. Ensures accurate item master file and bill of material.

4. Advises management of the status of work in progress, material availability, and potential production problems to ensure that personnel, equipment, materials, and services are provided as needed. Evaluates, recommends, and implements changes to the overall planning process consistent with continuous improvement goals.

5. Coordinates cross-functional activities with Quality Assurance, Manufacturing, Purchasing, Engineering, Inventory Control, Shipping/Receiving, and Contract Administration to ensure a smooth flow of materials through the production process and consistent information regarding status and priorities.

6. Evaluates materials supply and demands. Prepares work orders or purchase requests for the production or purchase of components or parts to support a master production schedule, shop load, and inventory requirements. Coordinates material movements between internal work and storage areas and/or outside processing or suppliers to ensure materials are available when needed.
7. Schedules and expedites the movement of parts by means of move orders and/or stock transfers to meet customer shipping dates and minimize inventory.

8. Applies continuous improvement techniques and methods to internal processes and systems. May lead or be assigned to a special project team.

9. Analyzes inventory usage, scrap, and shrinkage. Recommends and implements any appropriate actions to minimize loss, reduce inventory, and/or increase inventory turnover that would support inventory level objectives.

10. Analyzes proposed changes in methods, schedules, and materials. Recommends actions by analyzing and interpreting data and making comparative analyses.

11. Resolves problems concerning overshipments, shortages, engineering changes, and cancellation of orders.

12. Maintains configuration control on all open orders and appropriate data files as required by division policies and procedures.

13. Maintains professional and technical knowledge by attending educational workshops, reviewing technical or trade publications, establishing networks, and/or participating in professional associations.

14. Complies with federal, state, and aerospace industry regulations; ensures adherence to requirements and advises management on needed actions. Complies with policies and procedures in Government/Commercial Practices Manual (GPM/CPM).

15. May provide leadership to others in department. Acts as prime contact on high level projects. Establishes goals and objectives required to complete projects. Trains and mentors less experienced employees.

16. Shares specialized knowledge with others. Represents company on high-level projects. Contributes to team effort by accomplishing related results as needed. Work assignments may include cross-functional or project team responsibilities (e.g. continuous improvement).

Job Requirements: QUALIFICATIONS

Education and Experience
1. Bachelors degree (BA) in Business Administration or a related field, or an equivalent combination of education and experience which has provided both theoretical and practical knowledge in the field.
2. Demonstrated ability to perform the essential functions of the job typically acquired through six or more years of related experience.
3. APICS certificate preferred.
4. Thorough knowledge of manufacturing resources planning theories, principles, and industry practices.
5. Thorough knowledge of manufacturing resource planning systems, business application software, and interface operations.
6. Ability to effective assess and implement continuous improvement methods (e.g. pull systems, process mapping, JIT).
7. Knowledge of legal, regulatory, and internal policy requirements related to production control.
8. Ability to work on a variety of problems of diverse scope and complexity where analysis and evaluation of various outcomes require tradeoffs.
9. Ability to solve a wide range of difficult problems in imaginative and practical ways and evaluate alternative solutions that may require coordination across multiple teams. Ability to establish goals and objectives to complete projects.
10. Ability to read, analyze, and interpret policies and recommend changes to procedures.
11. Ability to effectively communicate and present information to team members, team leaders, and top management.
12. Ability to respond to significant inquiries or complaints from customers, regulatory agencies, or members of the business community.
13. Ability to define problems, collect data, establish facts, and draw valid conclusions.
14. Ability to effectively demonstrate team member competencies and participate in goal-setting, performance feedback, and self-development activities

Demonstrated ability to perform the essential functions of the job typically acquired through six or more years of related experience. In addition, has completed a Bachelors degree in Business Administration or a related field and has passed the majority (3 or more) of the CPIM national certification exams; OR, is CPIM certified.

Knowledge, Skills and Abilities

Thorough knowledge of manufacturing resources planning theories, principles, and industry practices. Thorough knowledge of manufacturing resource planning systems, business application software, and interface operations. Ability to effective assess and implement continuous improvement methods (e.g. pull systems, process mapping, JIT). Knowledge of legal, regulatory, and internal policy requirements related to production control. Ability to work on a variety of problems of diverse scope and complexity where analysis and evaluation of various outcomes require tradeoffs. Ability to solve a wide range of difficult problems in imaginative and practical ways and evaluate alternative solutions that may require coordination across multiple teams. Ability to establish goals and objectives to complete projects. Ability to read, analyze, and interpret policies and recommend changes to procedures. Ability to effectively communicate and present information to team members, team leaders, and top management. Ability to respond to significant inquiries or complaints from customers, regulatory agencies, or members of the business community. Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to effectively demonstrate team member competencies and participate in goal-setting, performance feedback, and self-development activities.

TYPICAL MENTAL AND PHYSICAL DEMANDS

While performing the duties of this job, the employee is required to sit. The employee frequently is required to use hands to operate a computer and talk or hear. The employee is occasionally required to stand and walk. Specific vision abilities required by this job include close vision. Also expected of the employee is regular attendance, the ability to work cooperatively and professionally with others and members of the public, and the ability to manage multiple tasks at once.

(The essential functions have been provided as examples of types of work performed by employees assigned to this job classification. The Company reserves the right to modify the work assignments and/or to make reasonable accommodations so that qualified employees can perform the essential functions of the job. The physical and mental demands described above are representative of those required to successfully perform the essential functions of this job.)
 
Job Number: JK-9506
Job Location: Mentor, OH
Rate: 30/hr max
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Powerplant Subsystems Engineer

Description:
As the Powerplant Subsystems Engineer you will report to the Director of Propulsion IPT and be responsible for design, development, integration, testing and certification of the powerplant subsystems, including nacelle systems, inlet, thrust reverser, auxiliary power unit (APU), and fire protection for the aircraft.

• Develop powerplant subsystems design, architecture and product plans, including qualification and certification plans
• Provide subject matter expert level technical leadership, mentoring and guidance on both practical and theoretical aspects of powerplant subsystems
• Define requirements for the powerplant subsystems to ensure compliance with regulations and customer requirements
• Provide validation and verification of powerplant subsystems requirements
• Perform powerplant subsystems tests and certification, and provide system and certification documentation
• Manage the powerplant subsystems scheduling, budget, resources and suppliers
• Report subsystem status to ensure milestones are met in support of the overall program schedule

Requirements:
• Minimum of a Bachelor’s Degree in Aerospace, Mechanical Engineering or other relevant Engineering position
• Master’s degree in a technical and/or management specialty preferred
• 7+ years of deep, hands-on experience in Powerplant systems development, design and testing in Military, Commercial and/or business jet aircraft



The Structures Company is an AA/EOE.
 
Job Number: 346
Job Location: Reno, NV
Rate: OPEN - **DOE**
Per Diem: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Procurement Quality Engineer Temp UT

Description:
PQE - Procurement Quality Engineer Temp

1 year assignment
Pay rate $30-$40/hr DOE
Technical Degree required...must have technical degree

Work in Ogden:
1425 W 2675 N
Ogden UT 84404

Working hours: Monday-Friday 8:00am-5:00pm
OT Possible, but not likely

Looking for the following experience in addition to job description...
-5 years experience
-Auditing
-Problem Solving skills - Six Sigma, etc
-ASQ Certified preferred but not required
-Blueprint reading, GTD knowledge
-PPAP preferred
-Strong computer skills

Develops, modifies, applies and maintains quality standards and evaluation methods for products and processes. Provides moderately complex statistical information for quality improvement by determining and applying testing methods and criteria. Coordinates and guides technical evaluations, analysis, and related data acquisition processes to ensure division quality objectives are achieved.

1. Bachelors degree (BS) in Engineering or a related technical discipline. Demonstrated ability to perform the essential functions of the job typically acquired through two or more years of related experience.
2. American Society for Quality certification desired. Practical knowledge of state-of-the-art inspection and quality engineering/assurance techniques, procedures, instruments, equipment, theories, principles and concepts and general business operations.
3. Knowledge of aerospace industry or similar industry products and legal and regulatory requirements related to field.
4. Ability to effectively apply continuous improvement principles and techniques to quality and manufacturing functions.
5. Ability to use standard business software applications and/or specialized data analysis tools.
6. Ability to work on a variety of problems of moderate scope and complexity where analysis of the situation or data requires thorough identification of factors and analysis of impact; work within general work objectives regarding projects and team goals.
7. Ability to read, analyze, and interpret scientific and technical journals, and financial reports.
8. Ability to effectively communicate and present information to team members, team leaders, and top management; respond to significant inquiries or complaints from customers, regulatory agencies, or members of the business community.
9. Ability to interpret a broad variety of technical instructions in mathematical or diagram form that include several abstract and concrete variables.
10. Ability to define problems, collect data, establish facts, and draw valid conclusions.
11. Ability to use full discretion in selecting procedures and techniques to apply to work and determine priority and order of assignments.
12. Ability to effectively demonstrate team member competencies and participate in goal-setting, performance feedback, and self-development activities.
 
Job Number: JK-9309
Job Location: Ogden, UT
Rate: 30-40/hr DOE
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Engineer (Aircraft)

Description:
The Product Engineer will be responsible for mid to high complexity projects with high complexity-related to general engineering and technical process improvements.

They will:
• Provide experienced sustaining engineering support to aircraft manufacturers, and other aftermarket customers.
• Provide experienced engineering support for operations, supply chain, quality, technical publications and program management.
• Provide sustaining engineering support to airlines and other aftermarket customers.
• Update engineering documentation through Engineering change orders and Document Change notices.
• Communicate with internal and external customers on a regular basis.
• Lead teams through problem investigation and solution/design approaches as well as continuous improvement efforts.
• Provide root cause and corrective action investigations.
• Have direct interface with external customers on engineering issue resolutions and product improvements.
• Support after hours Aircraft On Ground (AOG) airline/OEM requests as experience and knowledge is obtained
• Support Material Review Board (MRB) evaluation and disposition.
• Ensure quality products utilizing company quality procedures.
• Audit work areas for safety compliance.
• Adhere to all company rules and codes of conduct.

Education
Bachelor of Science - STEM, Mechanical or Aerospace Engineer, General Engineering, Engineering Physics, or similar.
 
Job Number: 1910107491
Job Location: CO Springs, CO
Per Diem: split
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Safety Support Engineer

Description:
****MUST be a U.S. Citizen****

COPS Management (required):
Work with Propulsion Systems Product Safety Manager (PSM) to understand and pro-actively manage the propeller product line entries into the Control of Process and Safety (COPS) database.
1. Review Product Safety Review Board (PSRB) approved COPS inputs, enter into COPS tool and track / facilitate through release process.
2. Examine engineering drawings prior to release to ensure alignment between proposed drawing changes and PSRB approved drawing mark-ups.
3. Provide targeted COPS searches and extracts on request.

PSRB / PSI support (required):
1. Assist with finalizing meeting minutes, coordinating drafting with contractor and final review and approval with the Product Safety Manager Check and update potential safety issue (PSI) and AI databases in coordination with Propulsion Systems PSRB minutes drafting and finalization.
2. Perform database queries to support issue management decisions at PSRB and requests from presenters.
3. Guide engineers in developing required documentation for safety part approval at the PSRB using product safety management processes and standard work.

RRCA Team support (additional potential tasks):
1. Assist in coordination of root cause corrective analysis project by task planning, AI tracking and management, and fault tree development.

Safety Risk Analysis (additional potential tasks):
1. Support ongoing needs for Continued Airworthiness Assessment Methodology (CAAM) statistically-based analyses to inform the Propulsions Systems PSRB and the Collins PSB in potential safety issue management decisions for Propellers issues.
2. Work with investigation teams to identify information required for generating risk models for potential safety issues.
3. Construct models to assess risk using Continued Airworthiness Assessment Methodology (Ref. FAA AC39.8)-consistent techniques for unaddressed / uncorrected issues and to evaluate effectiveness of possible Corrective Action Plans.
4. Research historical data to support severity hazard ratio development.
5. Work with statistician to resolve modeling issues.
6. Develop and interpret the models and perform peer reviews to ensure the highest possible analysis integrity.

Required Experience / Qualifications:
1. BS degree with 2+ years’ experience in industrial or aerospace engineering environment.
2. Excel and database processes and management.
3. Engineering drawing notations and familiarity.

Additional Beneficial Experience:
1. Engineering change control processes
2. Critical characteristic identification and management
3. Basic statistics and risk analysis
4. Ability to use Minitab tool for Weibull analysis
5. Systems engineering / reliability engineering

Additional Comments:
1. A desire to understand the relationship of how propeller hardware manufacture and servicing is controlled to ensure the safety of our customers and the flying public is essential.
2. Some experience with Aerospace systems / operation understanding is desirable.
3. Experience with fault tree, Failure Modes and Effects Analysis, and Failure Hazard Analysis methods is a plus.
 
Job Number: 11779
Job Location: Windsor Locks, CT
Rate: $72.42/HR
Per Diem: No
Overtime: Possible
Duration: 2 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Program Manager

Description:
Johnson Service Group (JSG) is seeking a talented Program Manager to assist in managing the planning and execution of major projects for our global. global aerospace and defense customer.

Scope of Experience and Responsibilities:

2+ years of related program management and/or coordination experience within the aerospace, defense, automotive and/or energy industries.
Program Management knowledge with New Product Introduction (NPI) is a plus.
Experience with high reliability and low volume E/M products is a plus.
Will support engineering and act as a customer interface.
Support project milestones, costs and deliverables.
Ensure that customer satisfaction objectives are met.
Track and report project status and progress.
Knowledge of
PLC (Product-Life-Cycle) process and related tools is a plus.
May act as the primary point-of-contact with client customers.
Contribute to strategic and cost planning, and
change of project scope.
Align with sales and business development team, including assistance with proposal development.
Interface with manufacturing and supply chain to ensure quality, technology, delivery and delivery capacity expectations are met.
Must have strong strategic planning skills.
Six Sigma, Lean and continuous improvement knowledge is a plus.
Education/Certifications:

A technical or business Bachelor's Degree is required
MBA or equivalent Master's Degree is a plus, but not required
PMP certification is preferred.
Duration: Direct Hire

Location: Greater Los Angeles, CA area

Compensation: Highly competitive, including a highly competitive salary, bonus, and comprehensive benefits.
 
Job Number: 375135
Job Location: North Los Angeles, CA
Per Diem: No
Overtime: Possibly
Duration: Direct
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Program Manager - Level 2

Description:
** Candidates must be U.S. Citizens without Dual Citizenship **
**Secret Clearance PREFERRED, not required**

Duties:
1. Our client is seeking a Program Manager to join our Redmond, WA office.
2. Preferably a recent graduate with a BS.
3. In this role, you will support development and production programs.

Essential Job Functions (Including % of Time for Each):
80% - Manages customer relationships; acts as primary customer interface and decision authority for assigned programs. Accountable for scope, risk/ opportunity management, cost and schedule, including earned value management, of assigned fixed price or cost reimbursable propulsion programs. Leads cross-functional program team definition; work package definition, detailed program planning and program baseline development; incorporation of lessons learned; and program execution including direction, control, achievement of program requirements and program closeout.

20% - Creates and manages strategy for development of the business for the propulsion product area. Leads or provides inputs to proposals, contract negotiations, statement of work (SOW) reviews and implementation of program management best practices. Provides and manages the award and sales forecasts for assigned programs and customers.

US Citizenship required. Must also be able to satisfy federal government requirements for access to government information, and having dual citizenship may preclude you from being able to meet this requirement.

Required Skills:
1. Experience with program planning, IMS development, risk and opportunity analysis, contract change management, control account management, work package development, earned value management (EVM) and program execution for cost reimbursable and fixed price programs for U.S. Government or commercial space missions.
2. Demonstrated success in leadership and management of both development and production programs in a dynamic, matrixed environment.
3. Has been a Program management in Aerospace programs, with P and L responsibility.

Desired Skills:
1. Advanced degree in Engineering, Science, Mathematics or Business.
2. Working knowledge of thruster system design, production and performance.
3. Innovative thinking abilities; experience with change leadership.
4. Proven ability to utilize excellent oral and written communication skills to build successful teams; presentation skills appropriate for executive-level briefings.
5. Prior P&L responsibility for programs or business areas.
6. Program Management certification.
7. Active DoD Security Clearance.
8. Experience working on NASA programs

Education:
1. Requires a Bachelor's degree (recent Graduate preferred) and 3 years experience with management of multiple concurrent programs for components through complex systems for space programs (or an equivalent combination of education and experience).
 
Job Number: 11758
Job Location: Redmond, WA
Rate: $37.50 - $51.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Engineer- Job ID 39064

Description:
We have an Excellent Contract position for a Senior Supplier Quality Engineer to join a leading Company located in Phoenix, AZ.

**Position requires U.S. Citizenship.**
**US Citizenship is required. Candidate must have the ability to obtain and maintain a Secret Security Clearance.** Please click on this link if you have any questions on how to obtain a clearance https://news.clearancejobs.com/2016/06/12/obtain-security-clearance.


Job Responsibilities:
We are looking for an experienced Supplier Quality Principal Engineer with experience with the manufacturing, inspection, and approval of multiple types of products intended for the Aerospace and Defense Industry.
This professional will implement tools and processes to ensure suppliers are prepared and have robust plans to deliver first-time quality to Systems Program Customers.
The selected candidate will also investigate, evaluate, resolve and prevent Quality problems by conducting audits, analyzing defect trends, leading continuous improvement projects and implementing preventive tools.
The Sr. Supplier Quality Engineer will conduct capability assessments that verify supplier qualifications, will travel to assigned suppliers, and lead multiple projects to completion.
This must be a self-starting problem solver who will utilize analytical skills to find innovative solutions to quality-related issues. Strong communication skills are required to ensure suppliers understand requirements and expectations; make progress reports and present findings.
Job Qualifications:
Bachelor’s degree in Engineering, Computer Science, Computer Engineering or related technology, and at least ten (10) years of experience.
Work Experience in a Supplier Quality Engineering role Experience in Aerospace or a Defense Electronics Prime Contract environment Working knowledge of AS9100 Quality System and AS9102B First Article Requirements and Source Inspections Experience with electrical/mechanical inspections, product test, equipment and instrumentation Direct knowledge of Manufacturing processes and supply chain logistics from raw material to finished goods including experience with Enterprise Resource Planning (ERP) system
Effective Problem Solver using Structured Problem-Solving methods and systems Effective communicator, able to express ideas clearly, directly and objectively. Practical problem solver.
Preferred:
Proficient experience Product Production Line Validation, test, equipment, instrumentation, and qualification of Mechanical and Fabricated products.
Working knowledge of PCBA/CCA inspection/test, equipment, and instrumentation (IPC-A-610 / IPC-A-600 certification desired).
Experience with product test, equipment and instrumentation, knowledge of thermal processes, welding and brazing, finishes and coatings, nondestructive testing, fabrication, composites and other common processes common in the Aerospace and Defense Industries Familiarity with APQP and PPAP and process tools such as PFMEA and Control Plan Practical experience with Lean Manufacturing and Lean Six Sigma Green / Black Belt certification from a recognized organization.
Working knowledge of the principles and the purpose of a Quality Management System.
 
Job Number: 39064
Job Location: Phoenix, AZ
Rate: $26 to $29.76
Per Diem: NO
Overtime: YES
Duration: 12 Month
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TAD PGS INC
Attention: Maria Gomez
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
RF Electrical Engineer (DOD Secret Clearance)

Description:
Summary:
• This position will support electromagnetics and radio frequency (RF) testing.
• Working knowledge of RF testing of structures, antennas, radomes, and other aerospace related components is a must.
• The qualified applicant shall be able to perform data analysis and present findings to program engineering teams, be able to author or review RF test plans, and provide input to test fixture design, manufacturing, and set-up.
• Daily communication with management staff, program/Integrated Product Team (IPT) members, and customers is expected.

Required Qualifications:
• Active Secret DoD Clearance within 5 ½ years of last investigation
• B.S. in Electrical Engineering (ABET), specializing in RF / Electromagnetics; M.S. is desirable o Minimum 5 years with B.S. or related experience, 3 years with M.S.
• Relevant experience in aerospace industry, with experience in testing and analysis of structures, conformal antennas/apertures, arrays, and Radomes
• Solid background in Electromagnetics
• Working experience with test and evaluation of microwave devices
• Verification of antenna, radome, and structure performance through prototype fabrication, integration into test fixture(s), and testing
• Experience with commercial data analysis software, such as Knowbell and/or Pioneer
• Familiarity with Computational Electromagnetic (CEM) tools
• Willingness to work cooperatively in a team
• Proficient in MS Office suite
• Experience fostering and leading in a culture of continuous improvement
• Excellent verbal and written communication skills

Preferred Qualifications:
• Working experience within various anechoic test chambers
• Ability to create software algorithms for design, optimization, and data analysis using tools such as MATLAB or FORTRAN
• Proficiency with Computational Electromagnetic (CEM) codes such as HFSS, FEKO, PMM, XPATCH, RAM2D, etc.
• Familiar with common material measurements for the extraction of electrical properties
• Knowledge of composite manufacturing processes
• Ability to work across multiple projects and follow through to completion

Competencies for Success:
• Ability to multitask and prioritize
• Strong attention to detail
• Initiative, self-starter, adaptable, and high motivation for excellence
• High energy, results oriented, self-motivated / self-reliant, team player
• Strong interpersonal skills with ability to interface with an organization at all levels
• Ability to work in a dynamic, fast paced environment
 
Job Number: 1910103102
Job Location: Magna, UT
Per Diem: split
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Receiving Inspector

Description:
We are looking for a great Inspector for an Aerospace Company in Los Angeles County.

• Perform First Article Inspections
• High school diploma or GED required
• Knowledge of AS9100 and other relevant aerospace industry standards.
• 2+ years of experience in a manufacturing environment, preferably aerospace, or equivalent education and experience. Previous inspection experience a definite plus.
• Ability to work with Microsoft tools, CATIA, 2D and 3D drawings or computer generated models or other similar types of engineering data.
• Basic math and technical writing skills.
Proven hands-on inspection experience in the aerospace industry using a variety of precision measurement tools.
• GD&T comprehension through experience and/or formal training.
• In depth understanding of the inspection techniques and quality issues associated with composites.
• Attention to detail and follow through.
• Ability to communicate effectively with all levels of company personnel.
• Specific vision abilities (corrected or uncorrected) required for this job include color perception, close vision, distance vision, peripheral vision, depth perception and ability to adjust focus.
• Must be able to lift 50 pounds (unassisted).

The Spaceship Company, LLC AA/EOE
 
Job Location: Los Angeles
Rate: $17-$20
Overtime: Possible
Duration: Temp to Perm
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
SYSTEMS INTEGRATION AND TEST ENGINEER - Clearance CA

Description:
165400 Job Title: Systems Engineer

Work Site Address: Palmdale, CA 93599
Job Number: 1475-1
Max Pay Rate: $75.00/hr
Start Date: 4/15/2019
End Date: 10/31/2019
Position Type: Contract


Job Summary:
Looking for world class talent in SYSTEMS INTEGRATION AND TEST ENGINEERING to be a part of a team that will carry on our tradition making history in advanced aircraft development. Candidate will support a team responsible for the integration and test of Mission Systems capabilities and functions in a laboratory, flying test bed, and flight test environment. Utilizing mission systems requirements, the candidate will assist in the development of test requirements and procedures, execute integration and test activities in a lab environment, evaluate mission systems functionality in a flying test bed, and support mission systems flight test evaluation. Candidate must have strong technical background, excellent communication and interpersonal skills, in-depth understanding of military aircraft functionality, and demonstrated integration and test experience with a modern software intensive mission systems architecture.


Roles and Responsibilities
Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems. Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS
Bachelor's or above in a Technical Engineering Discipline

Preferred Skills
Skills Needed:
• Read Engineering Drawings and Parts List
• Capture data digitally from parts lists and excel spreadsheets to form new lists
• Conduct meetings for changes to hardware allocations, tracking and reporting
• Project Planning, Architecture, Functional Allocations
• MS Excel, linking and pivot tables
Attributes
• Good attitude about work and working with others
• Attention to detail
• Good communication skills
• Team player
• Initiative and ability to work
• Passion for detail and getting the job done in a timely fashion
• RF Testing experience
• Experience with harness design and fabrication
• Experience with hardware configuration management

Qty 5 positions needed
This position is located at a facility that requires special access.
Manager will consider both 2 and 3 level candidates.
Will accept experience in lieu of degree
Must have Aviation/Aerospace experience
Experience Writing/Testing/Integrating/Developing Software for Embedded and C++ required
 
Job Number: JE-1475-1S
Job Location: Palmdale, CA
Rate: 75/hr max
Duration: 6 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Safety Support Engineer

Description:
Product Safety Support Engineer
COPS Management (required):
Work with Propulsion Systems Product Safety Manager (PSM) to understand and pro-actively manage the propeller product line entries into the Control of Process and Safety (COPS) database.
* Review Product Safety Review Board (PSRB) approved COPS inputs, enter into COPS tool and track / facilitate through release process.
* Examine engineering drawings prior to release to ensure alignment between proposed drawing changes and PSRB approved drawing mark-ups.
* Provide targeted COPS searches and extracts on request.

PSRB / PSI support (required):
* Assist with finalizing meeting minutes, coordinating drafting with contractor and final review and approval with the Product Safety Manager Check and update potential safety issue (PSI) and AI databases in coordination with Propulsion Systems PSRB minutes drafting and finalization.
* Perform database queries to support issue management decisions at PSRB and requests from presenters.
* Guide engineers in developing required documentation for safety part approval at the PSRB using product safety management processes and standard work.

RRCA Team support (additional potential tasks):
* Assist in coordination of root cause corrective analysis project by task planning, AI tracking and management, and fault tree development.
Safety Risk Analysis (additional potential tasks):
* Support ongoing needs for Continued Airworthiness Assessment Methodology (CAAM) statistically-based analyses to inform the Propulsions Systems PSRB and the Collins PSB in potential safety issue management decisions for Propellers issues
* Work with investigation teams to identify information required for generating risk models for potential safety issues
* Construct models to assess risk using Continued Airworthiness Assessment Methodology (Ref. FAA AC39.8)-consistent techniques for unaddressed / uncorrected issues and to evaluate effectiveness of possible Corrective Action Plans
* Research historical data to support severity hazard ratio development
* Work with statistician to resolve modeling issues
* Develop and interpret the models and perform peer reviews to ensure the highest possible analysis integrity.
Education:
BS Engineering or equivalent
Required Experience / Qualifications:
BS degree with 2+ years experience in industrial or aerospace engineering environment
Excel and database processes and management
Engineering drawing notations and familiarity
Additional Beneficial Experience:
Engineering change control processes
Critical characteristic identification and management
Basic statistics and risk analysis
Ability to use Minitab tool for Weibull analysis
Systems engineering / reliability engineering
Additional Comments:
A desire to understand the relationship of how propeller hardware manufacture and servicing is controlled to ensure the safety of our customers and the flying public is essential.
Some experience with Aerospace systems / operation understanding is desirable.
Experience with fault tree, Failure Modes and Effects Analysis, and Failure Hazard Analysis methods is a plus.
 
Job Number: 51736
Job Location: Windsor Locks, Ct
Duration: 12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Rick Nussbaum
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Buyer- Job Id 38422

Description:
We have an Excellent Contract position for a Senior Buyer to join a leading Company located in Sylmar, CA.

Major Responsibilities:
Issue requests for quotes/proposals (RFQ/RFP) and select the best source consistent with cost, quality and delivery requirements for electronic components, mechanical components, and electromechanical components.
Able to evaluate bid responses, negotiate price, delivery schedules, and place purchase orders in accordance with division policies, procedures, and government regulations.
Able to perform cost/price analysis.
Work with suppliers on rejected material and claims resulting from purchase order changes or terminations.
Act as liaison between suppliers and involved departments to resolve procurement-related problems.
Monitor supplier performance and take corrective action as necessary.
Work with Planners to maintain inventory levels consistent with production requirements and targeted inventory goals.
Prepare reports, attend meetings and respond to special assignments.
Negotiate and manage long term pricing agreements on critical commodities.
Perform other procurement tasks and projects as assigned.
Basic Hiring Criteria:
A minimum of a Bachelor's in Materials Management, Procurement, Business Administration, Operations Planning or a related field is required for this position.
A minimum of 7 verifiable years’ experience in procurement is required for this position.
A minimum of 3 verifiable years’ experience directly related to defense/aerospace procurements is required for this position.
Desired Qualifications:
Experience working within a defense/aerospace manufacturing company with low volume/high mix product requirements.
Strong working knowledge of procurement, planning and scheduling fundamentals. Must have a good working knowledge of the MRP-II system.
CPM or APICS certification preferred.
Must have basic knowledge of ITAR restrictions, and FAR/DFAR requirements.
 
Job Number: 38422
Job Location: Sylmar, CA
Rate: $37.00 to $45.00 Hour
Per Diem: NO
Overtime: YES
Duration: 12 Month+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TAD PGS INC
Attention: Maria Gomez
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Recruiter- Job ID 38815

Description:
We have an outstanding Contract position for a Senior Recruiter to join a leading Company located in Mason, OH.

**Position requires U.S. Citizenship.**

Major Responsibilities:
Overseeing the entire recruitment process from start to finish at assigned location(s).
Consulting with hiring managers with respect to job requirements and prepare internal / external postings.
Sourcing qualified candidates using the resume bank and all other sources.
Coordinating the interview process between the candidate and hiring manager.
Screen, interview and provide candidate recommendations for hiring manager.
Conduct pre-screening and referencing of candidates.
Negotiate offers and prepare the proper documentation (i.e. offer letters, CGRP Clearance).
Participate in Career Fairs when required.
Work with Taleo Applicant Tracking System and ensure all actions and data are updated on a daily basis for each applicant through hire date, as applicable.
Coordinate recruitment efforts with local Human Resources Manager, other HR managers and the recruitment team.
Follow company recruitment processes.
Ensure compliance with AAP, EEOC, Conflict of Interest Programs for past/current military and OFCCP regulations through daily.
Some domestic travel required for Career Fairs and Sector support/meetings.
High potential for contact with general job seekers as well as qualified candidates for technical and non-technical roles.
Extensive proactive customer service and company informational skills will be essential.
Basic Hiring Criteria:
A minimum of a Bachelor’s degree from accredited university is required for this position.
A minimum 3 verifiable years previous Engineering/ Technology Recruiting experience as a Corporate Recruiter (preferably in Aerospace & Defense) is required for this position.
Desired Qualifications:
Proven ability to develop a proactive, sustained recruitment strategy for technical engineering roles.
Previous experience using Taleo or other applicant tracking software. Proficiency using Taleo recently is highly desired.
Demonstrated track record of recruiting success in technical disciplines.
DoD Engineering recruiting and sourcing experience required.
 
Job Number: 38815
Job Location: Mason, OH
Rate: $35 to $40.00
Per Diem: NO
Overtime: YES
Duration: 12 Month+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TAD PGS INC
Attention: Maria Gomez
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Electrical Engineer

Description:
Sr. Electrical Engineer 

Location: Cedar Rapids, IA

12+ month contract, could be contract-to-hire


This is an exciting and challenging opportunity to design and support complex ruggedized hardware for fixed-wing and rotary-wing environments. Recently, this team completed development of a video graphics system, a video processing computer that provides 3-D video processing of aerial refueling operations, a tactical situational awareness system, and a ruggedized computing platform that provides pilots with real time situational awareness for the Next Generation Tanker. Additional products developed by this team include integrated processing cabinets, control display units, control panels, next generation processors and data transfer units that are used on multiple military platforms. There are also opportunities to develop digital logic for complex FPGA and SoC applications, perform testing in on site EEE facilities, and support transition of products into production. The selected candidate will work closely with Systems, Software, Mechanical Engineers, Environmental Effects Engineering, Manufacturing/Operations and Design to Cost support staff to assure defined requirements are consistently met in all phases of a product’s lifecycle.

Support activities include:
- Production support of complex avionics hardware including aircraft displays and mission computers.
- Development of test support equipment for integration and formal qualification (EMI/ENV) of complex avionics hardware including aircraft displays and mission computers.
- Obsolescence management of complex circuit card designs include multiple memory technologies, data interfaces, and mixed analog/digital designs.
- Development and test of high speed digital circuit board designs (processors, I/O, backplane, graphics) requiring the application of electrical engineering principles and techniques.
- Excellent teamwork and communication skills required. Also requires knowledge of hardware design processes, signal integrity analysis, manufacturability, testability, and thermal control.

REQUIRED:
-The ability to obtain a US Department of Defense (DoD) security clearance 

PREFERRED:
-Direct industry experience and knowledge of MIL-STDs (461, 810, etc) and DO-160,

____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 58025
Job Location: Cedar Rapids, IA
Rate: $55+
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Principal Mechanical Engineer - Clearance GA

Description:
Sr. Principal Mechanical Engineer (Job Number: 19032956)

Number of Openings: 1

Location(s): United States-Georgia-Warner Robins


Shift: 1st Shift

Target Start Date: Nov 25, 2019

Target End Date: Jun 19, 2020

Pay Rate: $57 to $60/hr

Work Schedule: 9/80

Duration of Assignment: Approx 3 to 6 months


This position is located at Warner Robins Air Force Base, Georgia.
This position supports the existing Government program and engineering teams at RAFB as well as Melbourne, FL. Duties to include the review, assessment and update of aircraft maintenance and structural requirements and technical data for sustainment. Development of bill of materials and repair concepts required to accomplish heavy maintenance is required. Experience in the resolution of aging aircraft issues is preferred. Technical support and advisory of Government counterparts is a primary objective of this position. The demonstrated ability to work closely with Government counterparts is required.

Basic Qualifications:

Bachelor's degree in a Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university with a minimum of 9 years of experience in design, fabrication or repair of metallic airframe structures.
An active DoD Interim Secret Clearance required to start.


Preferred Qualifications:

BS or MS, Mechanical or Aerospace Engineering
Experience with programmed depot maintenance (PDM) for aging military aircraft
Liaison Engineering Experience.
Excellent verbal and written communication skill
Ability to collaborate in a team environment
Ability to prioritize multiple responsibilities and/or accomplishing them simultaneously
Ability to comprehend and analyze complex problems and develop solutions
Experience with military specs and standards.
Experience interfacing with a military customer
 
Job Number: JK-1815S
Job Location: Warner Robins AFB, GA
Rate: 60/hr max
Per Diem: pd split possible
Duration: 8 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Tool Design Engineer

Description:
• Perform all engineering activities related to the design and construction of new tools and modification of existing tools for aerospace composites manufacturing.
• Responsible for working with personnel throughout the company to help resolve any engineering related tooling issues that may impact the manufacturing delivery schedule.
• Document findings, communicate results, make technical presentations, and may represent the organization as the prime technical contact on tooling related projects.
• Investigate manufacturing problems and recommend corrective action.
• Develop and maintains Tool Design and Drawing Standards.
• Study specifications and confer with engineering and shop personnel to resolve design problems related to material characteristics, dimensional tolerances, service requirements, manufacturing procedures, and cost of tools.
• Prepare models, drawings, engineering changes, and specifications.
• Facilitate project updates to management, and engage frequently with engineers.
• Interface daily with many departments at various technical and management levels.
• Develop, evaluate, and improve tool manufacturing methods, utilizing knowledge of product design, materials, thermal coefficients, fabrication processes, production equipment capabilities, assembly methods, and quality control standards.
• Estimate tool production times, staffing requirements, and related costs to provide information for management decisions.
• Confer with management, engineering, and other staff regarding manufacturing capabilities, production schedules, and other considerations to facilitate tool production or procurement.


Requirements:
• Bachelor’s degree from an accredited institution, with a concentration in a relevant Engineering discipline plus 5 years on the job experience.
• 10+ years of role related experience may be substituted for formal education.
• Experience in aircraft composite fabrication and assembly processes.
• Knowledge of lean manufacturing philosophies and tools.
• Excellent verbal and written communication skills.
• Excellent interpersonal and coaching skills.
• Ability to interact with all levels of the organization.
• Excellent Organizational Skills and problem-solving skills.
• Strong team player
• Excellent computer skills, word, excel and PowerPoint.
• CAD experience (Catia V5 preferred, but any CAD experience acceptable)
• Ability to read, interpret and create engineering drawings.
• Knowledge and experience with AS9100 a plus.
• Experience with manufacturing based ERP systems a plus.
• Knowledge of GD&T a plus
• Applicants must be U.S. persons as defined by the ITAR (22 CFR §120.15)

The Structures Company is an AA/EOE.
 
Job Number: 276
Job Location: Mojave, CA
Rate: $58-$65/Hr.
Per Diem: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Staff Software Engineer

Description:
Staff Software Engineer

Location: Phoenix AZ
Rate: $68.00/hr.
Shift: 1st
Duration: 6 Months
*MUST BE A U.S. CITIZEN OR PERMANENT RESIDENT*
*NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

The Software Engineer will work with a global team of engineers in Phoenix and India, on real time embedded software for electronic control units for aerospace applications. The role will involve requirements definition using DOORS or structured modelling, detailed design, code implementation using embedded C, validation of requirements and verification of implementation. It also includes managing Problem reports for the software that has already been delivered.
The successful candidate will be a highly motivated self-starter with strong written and oral communication skills and work well in a team environment.

Primary Responsibilities
* Executing new product introduction, value engineering, and production support projects
* Establishes software design requirements traceability, flow down requirements, development of code and test cases.
* Hands on debugging of code during integration and lab testing.
* Developing complex sub-system trade studies, algorithms, and error budgets.
* Driving the usage of appropriate Lean Product Development tools to support cost effective technical solutions with heavy focus on platform design, reuse, and knowledge-management.

Basic Qualifications
* Proficient with C programming language, and embedded systems in a lab environment.
* Experience with Microprocessors, Micro-controllers, and/or DSPs
* Excellent written and verbal skills
* Good computer skills with ability to learn new programs/software
* Ability to work under pressure and within time constraints
* Excellent organizational skills with ability to multi-task amidst rapid change Preferred Qualifications
* 6+ years experience in software development
* Experience working within DO-178B/C certification program(s), including Stages of Involvement (SOI) Audits under EASA or FAA
* Model Based Development, using SysML, Simulink or SCADE
* Experience with the following industry guidance: DO-330, DO-331, DO-254, ARP4754A
* Knowledge and use of ADA, Assembly, Perl, C#
* Software Verification including, test procedure development, robustness testing and debug
* Experience with software configuration management and problem reporting tools

Additional Job Details:
* Labview Test Stand experience
* Programming in Labview
* Working in Lab to Test Hardware
* Low level peripheral driver development for the TMS570 and LS1021A
* Develop an application for the LS1021A
* Develop a mechanism for linking generic signal processing functions to I/O data via configuration tables
* Travel will be required to Rockford and/or Jamestown
 
Job Number: 11636
Job Location: Phoenix, AZ
Rate: 68.00
Per Diem: No
Overtime: Possible
Duration: 6mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Analyst Principal Engineer - no clearance CA

Description:
166453/9359
Stress Analyst Principal Engineer
Irvine, CA
60-80/hr DOE


Ability to conduct stress analysis by hand and FEA. Experience with ANSYS Mechanical for FEA. Experience with a variety of analysis types, including: proof/burst, shock/acceleration, modal, harmonic, random vibration.

Overall 10-15 years of experience doing stress analysis in Aerospace. Familiarity with analysis of pneumatic engine components a plus. Strong verbal and written communication skills required.

Provides technical expertise and leadership in an engineering discipline, product, or systems field. Researches and carries out complex engineering assignments that result in the introduction of new technologies, products, or processes. Contributes to and has responsibility for the completion of significant assignments with broad product, technology, customer, and strategic business impact. Develops and recommends solutions to unique technical challenges.

· Bachelor degree (BS) (or Professional Engineer (PE) certificate) in engineering or a science technical discipline; Masters degree (MS) preferred.

· Demonstrated ability to perform the essential functions of the job typically acquired through 10-12 years of related experience.
· Comprehensive, advanced knowledge of product or domain engineering theories (e.g. mechanical, electronic, packaging, etc.), principles, industry practices, concepts, techniques, government regulations, and policies.
· Demonstrated ability to research, develop, and integrate new technologies.
· Ability to communicate and influence varied audiences to gain support or resolve issues. Makes effective presentations on complex topics to top management, customers, and/or other key stakeholders.
· Ability to apply and integrate knowledge of other related engineering areas or experts to own area of expertise.
· Proficient with software and specialized data analysis, and engineering design tools.
· Ability to establish and track performance to goals and objectives to complete complex or major projects and provide direction to the team at project milestones.
· Ability to respond to significant inquiries from customers, regulatory agencies, or other internal teams.
 
Job Number: JK-9359
Job Location: Irvine, CA
Rate: 60-80/hr DOE
Per Diem: pd split possible
Duration: 1 year
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineer

Description:
Structural analysis in support of aerospace structures. LM Aero seeks the opportunity to review the qualifications of individuals that are experienced in any one or more areas that match our opportunities – which may currently include: Developing static external aircraft loads and repeated external loads spectrum for aircraft and components, Flutter, Aircraft Dynamic Analysis, Vibration, Vibro-acoustics, Performing static strength (stress) analyses, Performing durability and damage tolerance (DADT) analyses, Building finite element models and/or post-processing results for structural analysis. These activities may be in support of new designs, modifications, retrofits, or support of fielded aircraft. Aerospace experience is required. Familiarization and use of specialized tools for structural analysis is required. Familiarity and experience with FEA tools such as NASTRAN and PATRAN (or other pre/post processor software), is desired. Candidate must have working knowledge/experience with Computer Aided Design software and be capable of interpreting detail, assembly, and installation type drawings.
Must be a US Citizen. This position is located at a facility that requires special access.
 
Job Location: Fort Worth, TX
Rate: 65-70/hr
Per Diem: Split
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Sanjay Khatri
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineers / Stress Analysts Needed

Description:
Airframe stress analysis and sizing of major aircraft structural components for CFR 14, Part 25 and EASA CS-25 certification.
Support internal loads development and coordination of airframe stiffness updates between major structural components/suppliers.
Support development of analysis methods and tools for design/manufacture/testing/certification.
Support Tier 1 Supplier/Partner analysis and oversight of methods.
Support design reviews and model releases for all structural interfaces within an IPT environment.

Requirements:
Must be a US or Canadian citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772.
8+ years of experience in performing stress analysis, developing methods or performing validation testing for Part 25 aircraft components.
Must have a bachelor’s degree in Aerospace or Mechanical Engineering, or similarly related area.
Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure / confidentiality agreement with current or any former employer that would prevent you from fully performing the duties of the position.
Knowledge of the conceptual and preliminary design phases of aircraft development is strongly preferred.
Knowledge of structural static, durability and damage tolerance requirements for Part 25 certification strongly preferred.
Highly self-motivated with a strong bias for action, and excellent problem-solving skills across multi-disciplinary skill sets.

The Structures Company, LLC is an AA/EOE.
 
Job Location: Reno, NV
Rate: Open
Per Diem: Yes
Overtime: Possible
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis - Static & Loads - Many Needed

Description:
Structural analysis in support of aerospace structures. The opportunity to review the qualifications of individuals that are experienced in any one or more areas that match our opportunities – which may currently include: Developing static external aircraft loads and repeated external loads spectrum for aircraft and components, Flutter, Aircraft Dynamic Analysis, Vibration, Vibro-acoustics, Performing static strength (stress) analyses.

Email resume to: mmccarthy@pdstech.com
 
Job Number: Lock, Stress - TX
Job Location: Ft. Worth, TX
Rate: $69.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 3 Months+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis - Stress/DADT/Dynamics/FEA/FEM

Description:
****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****Active Secret Clearance highly preferred. Position may require a clearance****

Job Description:
1. Structural analysis in support of aerospace structures.
2. Our client seeks the opportunity to review the qualifications of individuals that are experienced in any one or more areas that match our opportunities – which may currently include: Developing static external aircraft loads and repeated external loads spectrum for aircraft and components, Flutter, Aircraft Dynamic Analysis, Vibration, Vibro-acoustics, Performing static strength (stress) analyses, Performing durability and damage tolerance (DADT) analyses, Building finite element models and/or post-processing results for structural analysis.
3. These activities may be in support of new designs, modifications, retrofits, or support of fielded aircraft.
4. Aerospace experience is required.
5. Familiarization and use of specialized tools for structural analysis is required.
6. Familiarity and experience with FEA tools such as NASTRAN and PATRAN (or other pre/post processor software), is desired.
7. Candidate must have working knowledge/experience with Computer Aided Design software and be capable of interpreting detail, assembly, and installation type drawings.


Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11851
Job Location: Fort Worth, TX
Rate: $61.00 - $69.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 12 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis - Stress/DADT/Dynamics/FEA/FEM

Description:
****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****

Job Description:
1. Structural analysis in support of aerospace structures.
2. Our client seeks the opportunity to review the qualifications of individuals that are experienced in any one or more areas that match our opportunities – which may currently include: Developing static external aircraft loads and repeated external loads spectrum for aircraft and components, Flutter, Aircraft Dynamic Analysis, Vibration, Vibro-acoustics, Performing static strength (stress) analyses, Performing durability and damage tolerance (DADT) analyses, Building finite element models and/or post-processing results for structural analysis.
3. These activities may be in support of new designs, modifications, retrofits, or support of fielded aircraft.
4. Aerospace experience is required.
5. Familiarization and use of specialized tools for structural analysis is required.
6. Familiarity and experience with FEA tools such as NASTRAN and PATRAN (or other pre/post processor software), is desired.
7. Candidate must have working knowledge/experience with Computer Aided Design software and be capable of interpreting detail, assembly, and installation type drawings.

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11836
Job Location: Marietta, GA
Rate: $58.00 - $66.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer

Description:
Structural Analysis-Stress/DADT/Dynamics/FEA/FEM

Location: Marietta, GA
Duration: 13-14 months

Description:
Structural analysis in support of aerospace structures. client Aero seeks the opportunity to review the qualifications of individuals that are experienced in any one or more areas that match our opportunities which may currently include: Developing static external aircraft loads and repeated external loads spectrum for aircraft and components, Flutter, Aircraft Dynamic Analysis, Vibration, Vibro-acoustics, Performing static strength (stress) analyses, Performing durability and damage tolerance (DADT) analyses, Building finite element models and/or post-processing results for structural analysis. These activities may be in support of new designs, modifications, retrofits, or support of fielded aircraft. Aerospace experience is required. Familiarization and use of specialized tools for structural analysis is required. Familiarity and experience with FEA tools such as NASTRAN and PATRAN (or other pre/post processor software), is desired. Candidate must have working knowledge/experience with Computer Aided Design software and be capable of interpreting detail, assembly, and installation type drawings.

Level: Level 2: BS+4-8 YRS or MS+2-6 YRS

Requires U.S. Citizenship
 
Job Number: 19-14988
Job Location: Marietta, GA
Per Diem: split
Overtime: possible
Duration: 14 months
Start Date: 11/25/19
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 859 STEPHENSON HWY
City, State: TROY, MI 48083
Phone: 843/955-9221
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer ( Clearfield, Utah ) S9271202

Description:
Structural Analysis Engineer ( Clearfield, Utah ) S9271202
12 Month Contract

Pay Rate: $70-80 /hr W2, maybe more for the right candidate

**MUST HAVE AN ACTIVE SECRET CLEARANCE

Currently seeking a Principal Composite Structure Analysis Engineer to join our team in our Clearfield, UT offices.
Candidate must have had their last investigation within the last 4 1/2 years. Role description & Responsibilities: Highly motivated analysis engineer with composite structures experience for military and/or commercial aircraft. Responsibilities include but are not limited to static and dynamic analysis of composite structures, bonded and bolted assemblies The candidate also have experience with composite material mechanical characterization and dynamic testing (modal, forced vibe acoustic etc.) of coupon and subelements. Ability to define and lead characterization and test activities, including: authoring test plans and test reports, data reduction and calculation of material allowables.

Experience Requirements:
**MUST HAVE AN ACTIVE SECURITY CLEARANCE TO BE CONSIDERED FOR THIS ROLE (Candidate must have had their last investigation within the last 4 1/2 years.)

** BS in Civil, Mechanical, or Aerospace Engineering or related with a minimum of 8 years related experience in analysis engineering function.
Minimum of 8 years of experience with Nastran or ABAQUS Static, dynamic and thermostructural analysis experience Test lab experience, including instrumentation and data reduction Knowledge of composite materials and manufacturing processes Excellent oral and written communication skills Ability to work in a fast paced dynamic environment as part of a multi-discipline team

Experience Preferred:
Previous experience in aerospace manufacturing facility Proficiency with NX, Catia V5, Fibersim, Altair Hyperworks/Optistruct, and Hypersizer are also desirable • Definition of layups and ply patterns with Fibersim to generate finite element models, Requirements definition and verification Constitutive Model Development and implementation

Skills & Qualifications: Strong interpersonal skills with the ability to work with a team Excellent communication skills. Ability to make sound decisions Ability to multi-task Ability to prioritize and manage time effectively Education/Certifications: BS degree in Civil, Mechanical, Aerospace Engineering, or related
 
Job Number: S9271202
Job Location: Clearfield, UT
Rate: Open
Per Diem: no
Overtime: yes
Duration: 12 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineers - Many Needed

Description:
Structural analysis in support of aerospace structures. Experienced in any one or more areas that match our opportunities – which may currently include: Developing static external aircraft loads and repeated external loads spectrum for aircraft and components, Flutter, Aircraft Dynamic Analysis, Vibration, Vibro-acoustics, Performing static strength (stress) analyses, Performing durability and damage tolerance (DADT) analyses, Building finite element models and/or post-processing results for structural analysis.

Email resume to: mmccarthy@pdstech.com
 
Job Number: Lock-GA-Stress
Job Location: Marietta, GA
Rate: $66.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 12 Months+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis-Stress/DADA/Dynamics/FEA/FEM

Description:
Job Description: Structural analysis in support of aerospace structures. Client seeks the opportunity to review the qualifications of individuals that are experienced in any one or more areas that match our opportunities which may currently include: Developing static external aircraft loads and repeated external loads spectrum for aircraft and components, Flutter, Aircraft Dynamic Analysis, Vibration, Vibro-acoustics, Performing static strength (stress) analyses, Performing durability and damage tolerance (DADT) analyses, Building finite element models and/or post-processing results for structural analysis. These activities may be in support of new designs, modifications, retrofits, or support of fielded aircraft. Aerospace experience is required. Familiarization and use of specialized tools for structural analysis is required. Familiarity and experience with FEA tools such as NASTRAN and PATRAN (or other pre/post processor software), is desired. Candidate must have working knowledge/experience with Computer Aided Design software and be capable of interpreting detail, assembly, and installation type drawings.

Must be a US Citizen. This position is located at a facility that requires special access.
 
Job Location: Marietta, GA
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis-Stress/DADT/Dynamics/FEA/FEM - no clearance GA

Description:
166195 Job Title: Structural Analysis-Stress/DADT/Dynamics/FEA/FEM

Work Site Address: Marietta, GA 30063
Job Number: 2003-1
Max Pay Rate: $58.73/hr
Start Date: 9/23/2019
End Date: 9/22/2020
Position Type: Contract

Job Summary:
This job is for a Senior Level Structural Strength (Stress) Analyst for the Air Mobility and Maritime Missions program supporting the C-130, LM-100J, C-5, and P-3 aircraft responsible for performing stress analysis on new and modified designs to validate that positive margins of safety exist for all failure modes under all operational and design criteria loading conditions.

Job entails conducting strength analyses for primary and secondary structure and mechanisms, providing support to production during airframe manufacture, and substantiation of structural repairs for fielded aircraft.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS
This individual must have a significant amount of experience conducting classical hand analysis of aircraft structure for various failure modes. Proficiency with FEA codes such as Nastran/Patran, StressCheck, and APEX is a plus. Individual must have strong interpersonal and communication skills. They must be capable of interpreting detail, assembly, and installation drawings. Basic qualification is a bachelor's degree from an accredited college in civil, mechanical, aerospace, or aeronautical engineering.


Skills: Category Name Required Importance Experience
Software Skills Finite Element Analysis (FEA) No 2 4 - 6 Years
Technical Skills Stress Analysis Yes 1 6 + Years

Qty 1 position needed
 
Job Number: JE-2003-1
Job Location: Marietta, GA
Rate: 58.73/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis-Stress/DADT/Dynamics/FEA/FEM TX

Description:
166857 Job Title: Structural Analysis-Stress/DADT/Dynamics/FEA/FEM

Work Site Address: Fort Worth, TX 76108
Job Number: 2612-1
Max Pay Rate: $69.00/hr
Start Date: 12/3/2019
End Date: 12/31/2020
Position Type: Contract


Job Summary:
Structural analysis in support of aerospace structures.

Roles and Responsibilities
Developing static external aircraft loads and repeated external loads spectrum for aircraft and components, Flutter, Aircraft Dynamic Analysis, Vibration, Vibro-acoustics, Performing static strength (stress) analyses, Performing durability and damage tolerance (DADT) analyses, Building finite element models and/or post-processing results for structural analysis. These activities may be in support of new designs, modifications, retrofits, or support of fielded aircraft.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
Aerospace experience is required.
Familiarization and use of specialized tools for structural analysis is required.
Familiarity and experience with FEA tools such as NASTRAN and PATRAN (or other pre/post processor software), is desired.
Candidate must have working knowledge/experience with Computer Aided Design software and be capable of interpreting detail, assembly, and installation type drawings.

Qty 15 positions
 
Job Number: JE-2612-1ATO
Job Location: Fort Worth, TX
Rate: 69/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design - Rotor-craft

Description:
Design complex, standard or custom, mechanical and structural airframe installation packages in new and/or retrofit aircraft. Create engineering drawings, interface with pertinent stakeholders in certification, production and flight test, support fleet sustainment activities and support STC projects.
Primary Position Responsibilities:
Create detail/assembly/installation drawings for structural and mechanical systems.
Review and facilitate engineering package release.
Can lead groups of engineers to complete projects along with representing the group at management meetings
Works independently with minimal supervision from Engineering management.
Work is reviewed upon completion for adequacy in meeting company objectives.
Coordinate essential information into the configuration management system listing mechanical and structural installations for each assigned project.
Participate in developing pricing information based on installation effort and provide quotes to Marketing Department for standard and custom options on new aircraft.
Support Marketing, Field Service, Flight Test and FAA Certification organizations as needed.
Act as liaison to manufacturing and production efforts as needed.
Support installation, functional and operational tests, and ground and flight tests.
Performs Functional Hazard Analysis and Systems Safety Analysis as required.
Performs preliminary stress analysis in support of initial layout and design concept.
Additional Responsibilities:
Education: Required: Bachelor's degree in Aeronautical/Mechanical/Civil Engineering from an accredited college/university or equivalent applicable work experience.
Preferred: Master's Degree from an accredited college/university in engineering
Experience: Required: Six or more years of directly applicable engineering experience in an aviation/aerospace manufacturing or completions environment utilizing a rotorcraft.
Required: Knowledge of aviation/aerospace structural design requirements, aviation/aerospace industry standards and the Federal Aviation Regulations.
Technical Systems Proficiency: Must be proficient with Microsoft Office Suite programs.
Minimum 8000 hrs CATIA V5 (or similar 3D modeling software), familiarity with AutoCAD and SAP programs
Experience with project management tools is preferred.
Citizenship: US Person under ITAR definition (U.S. Citizen, Permanent Resident of the US.)
 
Job Number: 1222424
Job Location: Dallas, TX - Texas
Rate: 60.00 hourly
Per Diem: yes
Overtime: possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: P O BOX 965280
2886 SANDY PLAINS RD

City, State: MARIETTA, GA 30066
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer

Description:
Structural Design

Location: Marietta, GA
Duration: 14 months

Description:
Primary role is design of structural detail parts, assemblies and installations, but may support equipment and systems installations as well. Engineer shall be responsible for development of layouts, preparation of engineering drawings and coordination of related activities. Candidate must be able to coordinate efforts with little or no supervision across a wide range of functional organizations such as Planning, Tooling, Stress, M&P, R&M, Manufacturing, and other Installation Design teams (ECS, Hydraulic, Harness, Subsystems) to ensure that designs meet customer and derived requirements. Layouts, studies, new drawings, revised existing drawings, and ECNs (Engineering Change Notices) will use Catia V5 and require a strong understanding of GD&T and Interchangeability. Although the primary assignment will be to support retrofit designs, could also support mod line issues, production floor support, and field requests and repairs.
Candidate must have aerospace design experience with knowledge of configuration management techniques, drafting/drawing conventions, and aerospace specifications and procedures.

Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 19-14988
Job Location: Marietta, GA
Per Diem: split
Overtime: pos
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 859 STEPHENSON HWY
City, State: TROY, MI 48083
Phone: 843/955-9221
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last two (2) years with the most recent investigation within the last five (5) years****

Job Description:
1. Primary role is design of structural detail parts, assemblies and installations, but may support equipment and systems installations as well.
2. Engineer shall be responsible for development of layouts, preparation of engineering drawings and coordination of related activities.
3. Candidate must be able to coordinate efforts with little or no supervision across a wide range of functional organizations such as Planning, Tooling, Stress, M&P, R&M, Manufacturing, and other Installation Design teams (ECS, Hydraulic, Harness, Subsystems) to ensure that designs meet customer and derived requirements.
4. Layouts, studies, new drawings, revised existing drawings, and ECNs (Engineering Change Notices) will use Catia V5 and require a strong understanding of GD&T and Interchangeability.
5. Although the primary assignment will be to support retrofit designs, could also support mod line issues, production floor support, and field requests and repairs.
6. The role could include airframe layout, rough sizing, preliminary design, detail design and drawing release.
7. Candidate must have aerospace design experience with knowledge of configuration management techniques, drafting/drawing conventions, and aerospace specifications and procedures.

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11832
Job Location: Palmdale, CA
Rate: $70.00 - $80.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 12 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer

Description:
Primary role is design of structural detail parts, assemblies and installations, but may support equipment and systems installations as well. Engineer shall be responsible for development of layouts, preparation of engineering drawings and coordination of related activities. Candidate must be able to coordinate efforts with little or no supervision across a wide range of functional organizations such as Planning, Tooling, Stress, M&P, R&M, Manufacturing, and other Installation Design teams (ECS, Hydraulic, Harness, Subsystems) to ensure that designs meet customer and derived requirements. Layouts, studies, new drawings, revised existing drawings, and ECNs (Engineering Change Notices) will use Catia V5 and require a strong understanding of GD&T and Interchangeability. Although the primary assignment will be to support retrofit designs, could also support mod line issues, production floor support, and field requests and repairs. The role could include airframe layout, rough sizing, preliminary design, detail design and drawing release.

Candidate must have aerospace design experience with knowledge of configuration management techniques, drafting/drawing conventions, and aerospace specifications and procedures.

This position is located at a facility that requires special access. Must have an active secret clearance with an investigation in the last 5 years
 
Job Number: 47706
Job Location: CA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer

Description:
A Structural Design Engineer job in Mojave, California is currently available through Belcan. In this role, you will be responsible to review planned manufacturing procedures to ensure compliance with design specifications and intentions, support test definition for verification testing of components and subsystems, and manage components and subsystems through their full life cycle. To be considered for this role, you will need to have composite design and production manufacturing experience. Bachelor's degree from an ABET (or equivalent) accredited institution, with concentration in Aeronautical and Astronautical Aerospace, or Mechanical Engineer. This is a great contract opportunity with a growing company.

Structural Design Engineer Job duties:

* Assist Engineering Manager in further refinement of design practices, philosophy and execution.
* Work closely with Engineering Manager to forecast completion dates and estimate work package durations.
* Provides development, mentoring, and training opportunities for engineers through excellent coaching and leadership skills.
* Review, update, and check engineering definition of structural components and assemblies based on records from the prototype build project.
* Develop standardized design criteria, documentation and templates.
* Assist in the setup of configuration management processes utilizing Product Life cycle Management (PLM) software.
* Support the review of manufacturing plans and procedures to ensure compliance with design requirements.
* Support the creation of structural test plans which will be used to verify that manufacturing processes meet design intent and requirements (according to part 25 FAA requirements).
* Coordinate with Analysis and Testing departments to ensure component performance.
* Support test definition to verify that components and manufacturing processes meet design intent and engineering requirements.
* Participate in the review, approval and release process of engineering definition.

Qualifications:

* Bachelor's degree from an ABET (or equivalent) accredited institution, with a concentration in Aeronautical and Astronautical, Aerospace, or Mechanical Engineering.
* Ten plus years of experience in structural design engineering for aerospace composite fabrication and assembly processes.
* Proficiency with CATIA V5 a must.
* Required Workbenches: Part Design, Assembly Design, Sketcher, Drafting, Generative Shape Design (GSD), Composites (CPD).
* Experience using GD&T and ASME Y14.5M-1994 drafting standards.
* Understanding of part 25 FAA requirements.
* Knowledge of manufacturing methods for various materials (composite layup, metal machining, 3D printing, bonded assembly, mechanical assembly).

ITAR Requirements
To conform to U.S. Government space technology export regulations, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by ITAR (22 CFR §120.15) or eligible to obtain te required authorizations from the U.S. Department of State.

If you are interested in this Structural Design Engineer job in Mojave, California, please apply via the 'apply now' link provided. Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.
 
Job Number: 293052
Job Location: Mojave, CA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer - CPD Or Fibersim Experience Required

Description:
Description
Develops CATIA 3D models, CPD definition, and 2D engineering definition for detail parts, assemblies, and installations
Establishes manufacturing tolerances for production of structural components
Develops and documents requirements and interface constraints for components
Coordinates with the structural substantiation department to ensure component performance in flight environments
Supports test definition to verify that components and manufacturing processes meet design intent and engineering requirements
Participates in the review, approval, and release process of engineering definition
Supports creation and review of manufacturing plans to ensure compliance with design requirements and company processes
Supports components throughout full lifecycle from prototype to final acceptance as well as modifications and repairs after installation
Uses engineering judgment to evaluate manufacturing issues and disposition nonconformance reports (NCR)


Qualifications
Bachelor’s degree from an accredited institution, with a concentration in Aeronautical, Astronautical, Aerospace, or Mechanical Engineering
3 years or more experience in structural design engineering for aerospace composite fabrication and assembly processes
Proficient with CATIA V5
Experience with Composite Part Design (CPD), or Fibersim. Assembly Design, Sketcher, Drafting, Wireframe, Surface Design
Experience with Generative Shape Design (GSD), GD&T and ASME Y14.5M-1994 drafting standards
Knowledge of manufacturing methods for various materials (composite layup, metal machining, 3D printing, bonded assembly, mechanical assembly)
Experience designing for aerospace environments
Experience in the development of human spaceflight hardware desired
Experience with Product Lifecycle Management (PLM) software and configuration management processes
Excellent analytical and decision-making skills
Excellent verbal and written communication skills. Excellent organizational and time-management skills Strong team player.
Proficient in Microsoft Office: Word, Excel, PowerPoint, Outlook

The Structures Company is an AA/EOE.
 
Job Number: 265
Job Location: Mojave, CA
Rate: $65-$70/Hr. **DOE**
Per Diem: Yes
Overtime: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer w/Active Secret Clearance

Description:
Structural Design Engineer

Location: Palmdale, CA (93599)

Active Secret Clearance Required

12+ month contract


Primary role is design of structural detail parts, assemblies and installations, but may support equipment and systems installations as well. Engineer shall be responsible for development of layouts, preparation of engineering drawings and coordination of related activities. Candidate must be able to coordinate efforts with little or no supervision across a wide range of functional organizations such as Planning, Tooling, Stress, M&P, R&M, Manufacturing, and other Installation Design teams (ECS, Hydraulic, Harness, Subsystems) to ensure that designs meet customer and derived requirements. Layouts, studies, new drawings, revised existing drawings, and ECNs (Engineering Change Notices) will use Catia V5 and require a strong understanding of GD&T and Interchangeability. Although the primary assignment will be to support retrofit designs, could also support mod line issues, production floor support, and field requests and repairs. The role could include airframe layout, rough sizing, preliminary design, detail design and drawing release.

Candidate must have aerospace design experience with knowledge of configuration management techniques, drafting/drawing conventions, and aerospace specifications and procedures.
**Must be a US Citizen. This position is located at a facility that requires special access. Must have an active secret clearance with an investigation in the last 5 years



____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 58248
Job Location: Palmdale, CA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12+ months
Start Date: 12/02/19
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Strength (Stress) Analyst

Description:
Location: Marietta, GA
Rate: $60.00/HR
Duration: 1 year contract
Per Diem Split: Yes (if eligible)
Overtime: Possible (x1.5)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****

Job Description:
1. This job is for a Senior Level Structural Strength (Stress) Analyst for the Air Mobility and Maritime Missions program supporting the C-130, LM-100J, C-5, and P-3 aircraft responsible for performing stress analysis on new and modified designs to validate that positive margins of safety exist for all failure modes under all operational and design criteria loading conditions.
2. Job entails conducting strength analyses for primary and secondary structure and mechanisms, providing support to production during airframe manufacture, and substantiation of structural repairs for fielded aircraft.
3. This individual must have a significant amount of experience conducting classical hand analysis of aircraft structure for various failure modes.
4. Proficiency with FEA codes such as Nastran/Patran, StressCheck, and APEX is a plus.
5. Individual must have strong interpersonal and communication skills.
6. They must be capable of interpreting detail, assembly, and installation drawings.
7. Basic qualification is a bachelor's degree from an accredited college in civil, mechanical, aerospace, or aeronautical engineering.

Education:
1. Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 11187
Job Location: Marietta, GA
Rate: $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Strength (Stress) Analyst

Description:
Location: Marietta, GA
Rate: $60.00/HR
Duration: 1 year contract
Per Diem Split: Yes (if eligible)
Overtime: Possible (x1.5)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****

Job Description:
1. This job is for a Senior Level Structural Strength (Stress) Analyst for the Air Mobility and Maritime Missions program supporting the C-130, LM-100J, C-5, and P-3 aircraft responsible for performing stress analysis on new and modified designs to validate that positive margins of safety exist for all failure modes under all operational and design criteria loading conditions.
2. Job entails conducting strength analyses for primary and secondary structure and mechanisms, providing support to production during airframe manufacture, and substantiation of structural repairs for fielded aircraft.
3. This individual must have a significant amount of experience conducting classical hand analysis of aircraft structure for various failure modes.
4. Proficiency with FEA codes such as Nastran/Patran, StressCheck, and APEX is a plus.
5. Individual must have strong interpersonal and communication skills.
6. They must be capable of interpreting detail, assembly, and installation drawings.
7. Basic qualification is a bachelor's degree from an accredited college in civil, mechanical, aerospace, or aeronautical engineering.

Education:
1. Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 11446
Job Location: Marietta, GA
Rate: $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Strength (Stress) Analyst - Structural Analysis-Stress/DADT/Dynamics/FEA/FEM - no clearance GA

Description:
165671/1801-1
Senior Level Structural Strength (Stress) Analyst
Work Location: Marietta, GA
Status: Open

Qty: 1
Desired Start Date: 8/19/2019
End Date: 8/28/2020

Job Description:
This job is for a Senior Level Structural Strength (Stress) Analyst for the Air Mobility and Maritime Missions program supporting the C-130, LM-100J, C-5, and P-3 aircraft responsible for performing stress analysis on new and modified designs to validate that positive margins of safety exist for all failure modes under all operational and design criteria loading conditions. Job entails conducting strength analyses for primary and secondary structure and mechanisms, providing support to production during airframe manufacture, and substantiation of structural repairs for fielded aircraft. This individual must have a significant amount of experience conducting classical hand analysis of aircraft structure for various failure modes. Proficiency with FEA codes such as Nastran/Patran, StressCheck, and APEX is a plus. Individual must have strong interpersonal and communication skills. They must be capable of interpreting detail, assembly, and installation drawings. Basic qualification is a bachelor's degree from an accredited college in civil, mechanical, aerospace, or aeronautical engineering.

Work Location: Marietta, GA
Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
Pay Rate: $58.73 Hourly

Software Skills Finite Element Analysis (FEA) No 2 4 - 6 Years
Technical Skills Stress Analysis Yes 1 6 + Years
 
Job Number: JE-1801-1
Job Location: Marietta, GA
Rate: 58.73/hr max
Per Diem: pd split possible
Duration: 12 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years with the last investigations within the last 5 years****

Job Description:
1. Affordability Engineer - Supporting the F-35 Affordability Program, the systems engineer will be responsible for the integration and execution of Cost Reduction Initiatives (CRI) across the Production, Sustainment, and Development business units for the program.
2. The candidate will provide counsel to cost category and CRI project owners regarding Affordability processes, business decision criteria’s, and funding options for successful CRI completion.
3. The candidate will monitor costs and progress of CRI projects, provide technical guidance to the CRI process managers, and work in accordance with program management requests and expectations from the F-35 Program Office.
4. Dedicated communication skills are a must, as integration duties will require liaison duties across multiple stakeholders and teams such as engineering, manufacturing, supply chain, suppliers, and business units across the F-35 program as well as our JPO customer.
5. As a systems engineer, the candidate will also develop and exercise skills as a Value Driven Solutions Specialist according to the expectations set forth by the Aeronautics Engineering & Technology functional leadership.

Basic Qualifications:
1. Bachelor’s Degree in Engineering or technically related discipline.

Desired Skills:
1. Engineering Experience in the Aerospace Industry
2. Experience using Microsoft Office tools emphasizing Excel, PowerPoint, and Word.
3. Experience with written, verbal, and presentation communications skills, including briefing to members of upper management.
4. Experience in systems engineering disciplines with understanding of the total lifecycle (architecture, requirements, design, analysis, integration, verification, production and sustainment) including the following key competencies: Supplier Interface, Proposal Analysis, Risk and Opportunity Assessment.
5. Experience working with the change request process.
6. Experience with trade studies.
7. Understanding and strong appreciation for practicing and developing Standard Work processes and tools.
8. Knowledge of overall F-35 air system, design, and processes.
9. Knowledge of F-35 development, production operations, and sustainment.

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11839
Job Location: Fort Worth, TX
Rate: $61.00 - $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years with the last investigations within the last 5 years****

Job Description:
1. This position is part of the Systems Engineering organization at our client.
2. Candidate is needed to fulfill a role in obsolescence management of aircraft components, also known as Diminishing Manufacturing Sources & Material Shortages.
3. Specifically, tasks will support the F-35 program and involve activities needed to mitigate the effects of obsolescence including last-time buys, lifetime buys, and Bill of Material (BOM) monitoring.
4. Additional duties will include inventory management and coordination, review and dispositioning of Supplier Data Requirements Lists (SDRLs), generating and briefing Business Case Analyses (BCAs) for parts buys, and developing Contract Data Requirements Lists (CDRLs) to the Customer.
5. Candidate will be expected to interface and integrate solutions across F-35 Engineering leadership, system/subsystem engineering teams, Supply Chain, Business Management, Program Management, and all associate parties involved in DMSMS for the F-35 program.

Basic Qualifications:
1. Experience in DMSMS in the Aerospace Industry
2. Experience in Product Data Management using Teamcenter, Siemens PLM Software portfolio.
3. Experience in Electrical Engineering or Components Engineering with emphasis upon Mission Systems Integration.
4. Experience working with Suppliers and/or Supply Chain engagement.
5. Experience using Microsoft Office tools emphasizing Excel, PowerPoint, and Word.
6. Experience with written, verbal, and presentation communications skills, including briefing to members of upper management.
7. Experience in Systems Engineering disciplines with understanding of the total lifecycle (architecture, requirements, design, analysis, integration, verification, production and sustainment) including the following key competencies: Supplier Interface, Proposal Analysis, Risk and Opportunity Assessment.

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11838
Job Location: Fort Worth, TX
Rate: $61.00 - $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
****Candidate can start without a Secret Clearance, but must be able to obtain a Secret Clearance ****

Job Description:
1. Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems.
2. Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal.
3. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints.
4. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications

Qualifications:
1. Seeking Systems Engineering Generalist to perform Technical Management activities.
2. Bachelor’s degree in an Engineering field.
3. Experience working in Aerospace programs.
4. DoD or USG Systems Engineering experience.

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11766
Job Location: Fort Worth, TX
Rate: $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
Location: Jamestown ND
Rate: $62.00/hr
Duration: 6 months
Work Shift: 1st Shift
*MUST BE A U.S. CITIZEN OR PERMANENT RESIDENT*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

o Manages overall projects to assist in the technical planning, system integration, verification and validation, evaluating alternatives including cost and risk, supportability and analyses for total systems.
o Performs analyses at all levels of total system product including; concept, design, fabrication, test, installation, operation, maintenance and disposal.
o Conducts engineering processes using standard work, including verification and qualification procedures.
o Synthesize analyses of data and uses the results to prepare technical reports of findings and recommendations.
o Seeks to identify possible problems presented in applicable projects that may cause a delay or exceed budget. Contributes to finding appropriate solutions.
o Performs analysis at all levels of the total system product including concept, design, fabrication, modeling, test, installation, operation, maintenance and disposal.
o Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems.
o Considers and evaluates alternatives accounting for similar metrics.
o Ensures the logical and systematic conversion of product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints.
o Decomposes customer specifications and system level requirements into sub-system and piece part requirements and generates verification criteria and plans for the requirements.
o Performs architectural exploration.
o Manages configuration process, performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications.
o MS Office Suite
o Able to present findings and collaborate with other team members or functional leaders
o Experience with any one of the following: RTCA DO-178, DO-254, DO-330 and DO-331
o Aerospace Industry experience
o Travel up to 10% domestically and internationally

Preferred Qualifications
o Requirements Management software e.g. DOORS or equivalent
o MATLAB and Simulink or equivalent systems modeling software Education & Certifications
o Bachelor’s degree and 7 years of relevant experience OR
o Advanced degree and 5 years of relevant experience OR
o In absence of a degree, 11 years of relevant experience is required
 
Job Number: 11305
Job Location: Jamestown, ND
Rate: $62.00
Per Diem: No
Overtime: Possible
Duration: 6mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer - Aerospace and Defense

Description:
Ingenium Technologies - Rockford, IL





Additional Job Postings: http://www.ingeniumtech.com/tech_staffing/



A large aerospace company is currently seeking several Systems Engineers to support the electric power systems power conversion and distribution product group. The candidate will define, maintain, document, and test system requirements for the secondary power distribution products.



Responsibilities will include but not be limited to:

Working in a team environment, engaging in full life-cycle development of electric power distribution and conversion systems.

Certifying to aerospace standards such as ARP4754

Develop distribution system architecture that meets or exceeds the product development requirements

Confirm product design performance, capability and reliability in the engineering product test laboratories

Work with internal systems and software teams to analyze and conduct engineering investigations on electronic products

Interact with both internal and external teams to seamlessly integrate distribution product designs into chapter 24 aircraft electrical systems

Coordinate with manufacturing faculties to effectively implement design into production

Collaborate with the product marketing teams locally to develop product requirements and ensure that the product meets their needs when launched

Required Software: MS Office



Required Experience:

10-15 years experience in systems engineering in the aerospace and defense industry
10-15 years experience with aircraft certification requirements related to system safety and reliability (ARP4754, ARP4761 , FAR / JAR) , and aircraft electrical system architecture
Experience with DOORs software
Experience with RTCA, FAA, ARINC, MIL, and ISO specifications
Experience with Electrical sub-systems development (e.g. Chapter 24, aircraft utilities, power distribution units, actuation systems)
Experience with High Voltage Direct Current (HVDC) Systems a plus
Experience with creating estimates and proposals
Required Education:

Bachelor’s degree in Computer Science, Electrical Engineering, or similar discipline
Position: Long Term Contract



Location: Rockford, IL



Employment Criteria: This position includes access or potential access to ITAR technical data. Therefore, candidates will need to qualify as a US Person which is defined as a US Citizen, a Permanent Resident who does not work for a foreign company/foreign government/foreign governmental agency or organization, or a political asylee in compliance with International Traffic in Arms Regulations.



Employment Statement: Ingenium Technologies is an equal opportunity employer and does not discriminate on the basis of race, color, religion, sex, age, national origin, disability, veteran status, sexual orientation or any other classification protected by federal, state or local law. Proof of eligibility for employment will be required upon employment.



Due to the requirements of the Customer, No Visa sponsorship is available.
 
Job Number: 247521
Job Location: Rockford, IL
Rate: open
Per Diem: yes
Overtime: yes
Duration: 1 yr
Start Date: asap
Input Date: 11/14/2020
Firm Name: INGENIUM TECHNOLOGY
Attention: Alvin Adeva
Address: 4216 MARAY DR UNIT A1
City, State: ROCKFORD, IL 61107
Phone: 815/315-9273
Fax Phone: 815/399-8804
Website: www.ingeniumtech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer - Aircraft Engine Installation

Description:
Experience:
• Must have system level engineering experience on engine installations. Turbo Prop install experience is preferable, but not mandatory.
• Must have a BS degree (BSAE, BSME)
• System testing required for PDR.
• Experience with layout and detail design of engine installation into aircraft for PDR.
• Spec out system parts.
• Coordinate/support manufacturing
• Select and manage suppliers
• Some experience with CAD software like Catia V5, UG NX, etc.
• Experience doing thermal analysis of engine installations.
• US Citizen highly preferred. Greencard could work, but much more difficult to place on program.
• Someone who has been a Project Engineer at UTAS/Collins Aerospace on an engine program would be perfect.







The Structures Company is an AA/EOE.
 
Job Number: 333
Job Location: Manassas, VA
Rate: $80/Hr. **DOE**
Per Diem: Yes
Duration: 9-12 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer / Affordability Engineer / Cost Reduction - Clearance TX

Description:
166814 Job Title: Systems Engineer


Work Site Address: Fort Worth, TX 76108
Job Number: 2590-1
Max Pay Rate: $70.00/hr
Start Date: 11/13/2019
End Date: 2/11/2021
Position Type: Contract

Job Summary:
Are you looking for an opportunity to work in a challenging, fast paced, high visibility environment requiring you to balance engineering skills, technical awareness, and strategic thinking to ensure successful execution of the largest defense program in history? Are you quick, innovative, process minded, customer focused, and great at networking? Do you want to exercise and develop your skills in project management across multiple cases and initiatives that can protect or save millions of dollars in program spending? Then look no further! The Technology & Strategies Team has what you are looking for! The T&S Team is part of the F-35 Systems Engineering & Integration organization and is looking for self-starting, motivated engineers who are willing to leverage their strengths and energy with a dedicated team.

Affordability Engineer supporting the F-35 Affordability Program, the systems engineer will be responsible for the integration and execution of Cost Reduction Initiatives (CRI) across the Production, Sustainment, and Development business units for the program. The candidate will provide counsel to cost category and CRI project owners regarding Affordability processes, business decision criteria’s, and funding options for successful CRI completion. The candidate will monitor costs and progress of CRI projects, provide technical guidance to the CRI process managers, and work in accordance with program management requests and expectations from the F-35 Program Office. Dedicated communication skills are a must, as integration duties will require liaison duties across multiple stakeholders and teams such as engineering, manufacturing, supply chain, suppliers, and business units across the F-35 program as well as our JPO customer. As a systems engineer, the candidate will also develop and exercise skills as a Value Driven Solutions Specialist according to the expectations set forth by the Aeronautics Engineering & Technology functional leadership.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
Bachelor’s Degree in Engineering or technically related discipline.

Desired skills
• Engineering Experience in the Aerospace Industry
• Experience using Microsoft Office tools emphasizing Excel, PowerPoint, and Word.
• Experience with written, verbal, and presentation communications skills, including briefing to members of upper management.
• Experience in systems engineering disciplines with understanding of the total lifecycle (architecture, requirements, design, analysis, integration, verification, production and sustainment) including the following key competencies: Supplier Interface, Proposal Analysis, Risk and Opportunity Assessment.
• Experience working with the change request process.
• Experience with trade studies.
• Understanding and strong appreciation for practicing and developing Standard Work processes and tools.
• Knowledge of overall F-35 air system, design, and processes.
• Knowledge of F-35 development, production operations, and sustainment.

Skills: Category Name Required Importance Experience
Areas of Expertise Risk Management No 1

Qty 1 position
 
Job Number: JE-2590-1S
Job Location: Fort Worth, TX
Rate: 70/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer TX

Description:
166703 Job Title: Systems Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2455-1
Max Pay Rate: $70.00/hr
Start Date: 11/4/2019
End Date: 2/2/2021
Position Type: Contract


Job Summary:
Seeking Systems Engineering Generalist to perform Technical Management activities. Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems.

Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
- Bachelor’s degree in an Engineering field
- Experience working in Aerospace programs
- DoD or USG Systems Engineering experience



Qty 1 position
 
Job Number: JE-2455-1ATO
Job Location: Fort Worth, TX
Rate: 70/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer - Clearance TX

Description:
166144 Job Title: Systems Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2002-1
Max Pay Rate: $65.92/hr
Start Date: 9/13/2019
End Date: 12/12/2020
Position Type: Contract

Job Summary:
This position is part of the Systems Engineering organization. Candidate is needed to fulfill a role in obsolescence management of aircraft components, also known as Diminishing Manufacturing Sources & Material Shortages.

Job Description:
Specifically, tasks will support the F-35 program and involve activities needed to mitigate the effects of obsolescence including last-time buys, lifetime buys, and Bill of Material (BOM) monitoring. Additional duties will include inventory management and coordination, review and dispositioning of Supplier Data Requirements Lists (SDRLs), generating and briefing Business Case Analyses (BCAs) for parts buys, and developing Contract Data Requirements Lists (CDRLs) to the Customer. Candidate will be expected to interface and integrate solutions across F-35 Engineering leadership, system/subsystem engineering teams, Supply Chain, Business Management, Program Management, and all associate parties involved in DMSMS for the F-35 program.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS
• Experience in DMSMS in the Aerospace Industry
• Experience in Product Data Management using Teamcenter, Siemens PLM Software portfolio.
• Experience in Electrical Engineering or Components Engineering with emphasis upon Mission Systems Integration.
• Experience working with Suppliers and/or Supply Chain engagement.
• Experience using Microsoft Office tools emphasizing Excel, PowerPoint, and Word.
• Experience with written, verbal, and presentation communications skills, including briefing to members of upper management.
• Experience in Systems Engineering disciplines with understanding of the total lifecycle (architecture, requirements, design, analysis, integration, verification, production and sustainment) including the following key competencies: Supplier Interface, Proposal Analysis, Risk and Opportunity Assessment.

Areas of Expertise Materials No 1
Areas of Expertise Supply Chain No 1
Technical Skills Data Management No 1

Qty 1 position needed
 
Job Number: JE-2001-1S5
Job Location: Fort Worth, TX
Rate: 65.92/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer DOORS

Description:
*This is a full time, 1 year contract to hire position located in York, PA*

*Per diem split is available for out of the area applicants*



CSS Staffing is seeking a Systems Engineer to support requirements analysis, requirements development, Concept of Operations (CONOPS), cost, and risk assessments, trade studies, and document system design descriptions. The successful candidate will develop component level performance specification by managing requirements in IBM Rational DOORS; create requirements traceability in DOORS; develop and maintain requirements compliance and supporting artifacts; develop interface control diagrams (ICDs) between assigned sub-system, system and components; develop trade studies to drive design decisions and document trade study results. Will also coordinate SE activities with IPTs and Specialty Engineering POCs to help influence the design and provide systems engineering input to support program reviews.



Required Skills

*6 years of aerospace Systems Engineering experience.

*Requirements development using DOORS.

*Proven ability to manage size, weight, power and cost of system; Concept of Operations (CONOPS), cost, and risk assessments, trade studies, etc.

*Proven ability to manage system risk.

*Bachelor’s Degree in Engineering



Preferred Skills:

*Experience with military vehicle systems.

*Model based systems engineering experience, such as SysML experience

*Experience with Controller Area Network (CAN) Bus strategies and implementation
 
Job Number: 858
Job Location: York, PA
Rate: DOE
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Safety Engineer ( Northridge, CA ) S9436479

Description:
Systems Safety Engineer ( Northridge, CA ) S9436479
6 Month Contract to Hire, high potential to convert

Pay rate: $70-100 /hr , flexible for the right candidate

Clearance: Active DoD Secret level clearance required

Interviewing ASAP

Qualifications:
- Bachelor of Science degree in Electrical Engineering or similar Engineering degree.
• Minimum 7 years of related experience.
• High level understanding of tactical missile subsystems.
• Proficient with MS Office suite of products.
• Strong interpersonal skills and an ability to build effective working relationships are a must.
• Excellent attention to detail.
• Excellent oral and written communication skills and technical writing experience.
• Ability to communicate findings to varied audiences to gain support or resolve concerns.
• Self-starter capable of performing and prioritizing assigned tasks with very little direction.
• Familiarity with requirements development and risk management. //

Key responsibilities include:
• Performing fundamental aerospace safety tasking, including generation of fault trees, functional hazard analysis, Failure Modes and Effects Analysis, Failure Mode, Effects and Criticality Analysis, software system safety analysis, sneak circuit analysis, bent pin analysis, and system/subsystem hazard analysis
• Interpreting system requirements, customer specifications, and military standards to develop appropriate safety requirements for hazard mitigation or elimination
• Generating and updating required System Safety documents such as SSPP, RHA, SCA, FTA, BPA, SSHA, SARs
• Applying environmental, military, federal, national, and industry regulatory safety standards and codes such as NIOSH, OSHA, NFPA, DOE, UBC, CFR, ASTM, ANSI, RCC, AFOSH, PESHE, MIL-STD-882, and AFSPCMAN 91-710
 
Job Number: S9436479
Job Location: Northridge, CA
Rate: Open
Per Diem: no
Overtime: yes
Duration: 6 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Design Engineer

Description:
A Test Design Engineer job in Mojave, CA is currently available through Belcan. In this role, you will be responsible to design test plans and equipment for validation of complex mechanical and structural components and systems. To be considered for this role, you will have a Bachelor's degree from an accredited institution, with a concentration in a relevant Engineering discipline. Must have four to eight plus years of experience in aerospace with an emphasis on testing or equivalent laboratory test engineering experience. This is a great long-term contract with a growing Aerospace Company.

Test Design Engineer Job duties:

* Design test plans and equipment for validation of complex mechanical and structural components and systems.
* Write test plans and procedures to define and support execution of tests.
* Interface with internal customers on integrated program teams to establish and verify specific test requirements.
* Work with support teams and vendors to procure, manufacture and assemble test articles and test stand hardware and equipment.
* Interface with external test laboratories to facilitate testing for company design and analysis teams.
* Participate in the test engineering review, approval and release process.
* Participate in the continuous improvement of testing practices, including test processes, lab procedures and lab technology implementation.

Qualifications:

* Bachelor's Degree from an accredited institution, with a concentration in a relevant Engineering discipline.
* Four to eight plus years" experience in aerospace with an emphasis on testing or equivalent laboratory test engineering experience.
* CAD modelling experience - Experience with Catia V5 preferred.
* Experience with simulation and finite element analysis preferred - NASTRAN, Femap.
* Experience with DO-160 environmental test standards for mechanical systems.
* Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired.
* Excellent computer skills, including Outlook, Word, Excel and PowerPoint.


If you are interested in this Test Design Engineer job in Mojave, CA, please apply via the 'apply now' link provided. Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.
 
Job Number: 292329
Job Location: Mojave, CA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design Engineer

Description:
Tool Design Engineer

Location: Chula Vista, CA (91910)

12+ month contract


Tool Design Engineer designs various tooling, fixtures for machining, welding, assembly, handling, ground support and composites tooling. This position will work directly with multiple engineering disciplines (Manufacturing, Product, Quality, Stress, etc.). The Tool Designer will also serve as technical support for tooling related issues on new and legacy product designs and manufacturing processes. Must have ability to prepare standard work packages for offload, and develop conceptual designs. In addition, be able to perform tool stress analysis.

BS degree or 5-10 year's experience as a Tool Design Engineer in a Manufacturing Environment required (Aerospace preferred). Strong Mechanical/Manufacturing Aptitude. Good understanding of assembly, machining and composite manufacturing processes. Good understanding of tool fabrication processes including welding, machining, heat treat, etc. Good understanding of ANSI Dimensioning and Tolerancing. Knowledge of CAD/CAM systems, CATIA V5 MBD (2000 hours minimum) experience preferred. Experienced in Lean manufacturing principles and strong aptitude towards implementing continuous improvement. Experienced in Microsoft Office applications (Word, Outlook, Powerpoint, etc.) and good technical writing skills. Experience with with tooling stress analysis in FEM and classical methods.





____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 57941
Job Location: Chula Vista, CA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: 12+ months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design Engineer

Description:
Tool Design Engineer

Chula Vista, CA
$48.25/hr
1 year W2 contract
First Shift
*MUST BE A U.S. CITIZEN OR PERMANENT RESIDENT*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
Tool Design Engineer designs various tooling, fixtures for machining, welding, assembly, handling, ground support and composites tooling. This position will work directly with multiple engineering disciplines (Manufacturing, Product, Quality, Stress, etc.). The Tool Designer will also serve as technical support for tooling related issues on new and legacy product designs and manufacturing processes. Must have ability to prepare standard work packages for offload, and develop conceptual designs. In addition, be able to perform tool stress analysis.

Additional:
BS degree or 5-10 year's experience as a Tool Design Engineer in a Manufacturing Environment required (Aerospace prefered). Strong Mechanical/Manufacturing Aptitude. Good understanding of assembly, machining and composite manufactuiring processes. Good understanding of tool fabrication processes including welding, machining, heat treat, etc. Good understanding of ANSI Dimensioning and Tolerancing. Knowledge of CAD/CAM systems, CATIA V5 MBD (2000 hours minimum) experience preferred. Experienced in Lean manufacturing principles and strong aptitude towards implementing continous improvement. Experienced in Microsoft Office applications (Word, Outlook, Powerpoint, etc.) and good technical writing skills. Experience with with tooling stress analysis in FEM and classical methods.
 
Job Number: 11596
Job Location: Chula Vista, CA
Rate: 48.25
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wire Design & Install Engr 4 (Electrical Design Engineer)

Description:
Wire Design & Install Engr 4

Location: Kennedy Space Center, FL
Duration: 12 months

Job Description:
Develops and maintains cable/wire harness detail and assembly designs. Analyzes results and performs design reviews. Leads the team to analyze results and performs design reviews. Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Documents processes, specifications and procedures that support the design and manufacture of electrical commodities. Develops complex statements of work, metrics, schedules and budgets. Performs technical review of supplier capabilities to facilitate source selection. Works under minimal direction.

Familiarity with wire harness design and electronic unit placement for aerospace applications a must. Unigraphics NX CAD experience required.

Education / Experience:
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

Skill Code: 601-Wire Design & Install Engr-General
Skill Code: 679-Electrical/Electronic Installation Design

Please share updated resume at ravi@iconma.com if interested.
 
Job Number: 19-13478
Job Location: Kennedy Space Center, FL
Per Diem: Available
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/234-6123
800 Phone: 866/914-9724
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wire Design & Install Engr 4-Florida

Description:
Wire Design & Install Engr 4

Location: Kennedy Space Center, FL
Duration: 12 months

Job Description:
Develops and maintains cable/wire harness detail and assembly designs. Analyzes results and performs design reviews. Leads the team to analyze results and performs design reviews. Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Documents processes, specifications and procedures that support the design and manufacture of electrical commodities. Develops complex statements of work, metrics, schedules and budgets. Performs technical review of supplier capabilities to facilitate source selection. Works under minimal direction.

Familiarity with wire harness design and electronic unit placement for aerospace applications a must. Unigraphics NX CAD experience required.

Education / Experience:
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

Skill Code: 601-Wire Design & Install Engr-General
 
Job Number: 19-13478
Job Location: Kennedy Space Center, FL
Per Diem: split
Overtime: possible
Duration: 12 months
Start Date: 11/11/19
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 859 STEPHENSON HWY
City, State: TROY, MI 48083
Phone: 843/955-9221
Website: www.iconma.com

Back to Advanced Job Search