Job Search Results

320 listings were found that matched your search words: Keywords: Software ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2020/09/23 Wednesday 04:22PM Pacific Time by ContractJobHunter. )

Listings 1 - 320

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Advanced Quality Engineer

Description:
Advanced Quality Engineer

Job ID # 2020-11550

Contract Opportunity

Location: Orlando Florida

Industry: Aerospace & Defense

Clearance Requirement: Ability to Obtain Secret Clearance

Minimum Education: Bachelor’s Degree

Minimum Experience: 5 Years

 

What You’ll Do:

Design, implement, and maintain quality assurance protocols and methods for processing materials into partially finished or finished products
Perform analysis of reports and production data to identify trends and recommend updates or changes to quality standards and procedures when necessary
Provide technical review of documents, drawings, assembly instructions, and project plans
Compare defects against standards and recommends dispositions, verifies implementation of rework, supports incoming/shipping inspection processes, as needed
Collect, organizes and analyze project data, generates and/or reviews metrics
Perform audits, assigns corrective action, and verifies implementation
Participate in project reviews and meetings including technical design reviews, technical peer reviews, material review boards, change control boards, failure review boards
Participate in continuous improvement and problem-solving activities within the project
Review documents/Drawings/Instructions for conformance to requirements
What You’ll Need:

Fully proficient knowledge of engineering (i.e., software, electrical, systems, etc.) methodologies, tools, and standards
Fully proficient knowledge of ISO 9001:2008, CMMI, ISO 14001ASME, ANSI, EIA, etc.
Fully proficient knowledge of use of relevant inspection/measurement tools and techniques
 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.



Education & Experience:

Bachelor’s Degree in Engineering, a related specialized area of field, combined with 5 + years of relevant work experience; or Master’s Degree combined with 3 + years of relevant work experience.
 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/
 
Job Number: Job ID # 2020-11550
Job Location: Orlando, FL
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 12 Months
Input Date: 07/28/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Advanced Quality Engineer

Description:
Advanced Quality Engineer

Job ID # 2020-11550

Contract Opportunity

Location: Orlando Florida

Industry: Aerospace & Defense

Clearance Requirement: Ability to Obtain Secret Clearance

Minimum Education: Bachelor’s Degree

Minimum Experience: 5 Years

 

What You’ll Do:

Design, implement, and maintain quality assurance protocols and methods for processing materials into partially finished or finished products
Perform analysis of reports and production data to identify trends and recommend updates or changes to quality standards and procedures when necessary
Provide technical review of documents, drawings, assembly instructions, and project plans
Compare defects against standards and recommends dispositions, verifies implementation of rework, supports incoming/shipping inspection processes, as needed
Collect, organizes and analyze project data, generates and/or reviews metrics
Perform audits, assigns corrective action, and verifies implementation
Participate in project reviews and meetings including technical design reviews, technical peer reviews, material review boards, change control boards, failure review boards
Participate in continuous improvement and problem-solving activities within the project
Review documents/Drawings/Instructions for conformance to requirements
What You’ll Need:

Fully proficient knowledge of engineering (i.e., software, electrical, systems, etc.) methodologies, tools, and standards
Fully proficient knowledge of ISO 9001:2008, CMMI, ISO 14001ASME, ANSI, EIA, etc.
Fully proficient knowledge of use of relevant inspection/measurement tools and techniques
 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.



Education & Experience:

Bachelor’s Degree in Engineering, a related specialized area of field, combined with 5 + years of relevant work experience; or Master’s Degree combined with 3 + years of relevant work experience.
 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/
 
Job Number: Job ID # 2020-11550
Job Location: Orlando, FL
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 12 Months
Input Date: 07/28/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Aerospace Warehouse Associate

Description:
A Warehouse & Logistics Associate job is currently available at Belcan in Trumbull, CT. This is a long-term contract job; full time, first shift 9/80 hours. Great matching candidates will have a high school diploma and one to five years of work experience in a warehouse setting; ideally within the aerospace industry. You will be supporting a variety of tasks around the plant, yard and worksite.

Warehouse & Logistics Associate job duties:
* Load, unload, and convey materials within or near plant, yard, and work site.
* Perform manual and clerical shipping and/or receiving duties which may require the use of hand trucks, forklifts, and other devices, as well as a computer to maintain data.
* Verifies quantity, weight, and conformance of materials; prepare records of materials shipped and bill of ladings; route materials to destinations.
* Lay out, fabricate and assemble nonstandard shipping crates and boxes, and prepare parts and tooling for special shipment.

Qualifications:
* High School Diploma or Equivalent.
* Ability to lift heavy objects and be on feet for extended periods.
* Ability to use and learn computer software, including Microsoft Office.
* Legal authorization to work in the US required.
Desired but not required skills:
* Aerospace industry experience.

If you are interested in this Warehouse & Logistics Associate job in Trumbull, CT please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.

Belcan is an equal opportunity employer. EOE/M/F/D/V

Build a challenging and rewarding career with an industry leader!

www.BELCAN.com
 
Job Number: 302118
Job Location: Trumbull, CT
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 05/20/2020
Last Updated: 09/23/2020
Firm Name: BELCAN TECHSERVICES
Attention: AbigailDeBiase
City, State: Northeast Region
Email: adebiase@belcan.com
Website: https://belcanjobs.smartsearchonline.com/careersv2/jobdetails.asp?sourcename=*CE+Weekly-Applied&jo_num=302118&job_number=302118

Aircraft Systems Engineers -- Many new long term programs in Missouri

Description:
Systems Engineers with avionics or software; DOORS or Rhapsody needed

PDS Tech - #1 Aerospace supplier in Missouri
 
Job Location: Missouri
Input Date: 02/12/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy or Ken Brownsher
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Email: mmccarthy@pdstech.com; kbrownsher@pdstech.com
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler B

Description:
Assembler B

Job ID # 2020-11540

Contract Opportunity

Location: El Segundo, CA

Industry: Aerospace & Defense

Minimum Education: High School Diploma

Minimum Experience: 1 Year

 

What You’ll Do:

Work from test and planning documents, circuit and product diagrams, equipment manuals, and verbal and written instructions.
Lay out and determine standard methods and sequences to test and troubleshoot complex digital electronic subassemblies, slices and units by performing operations such as inspections, wire checks, component verifications, and functional testing under various environmental conditions.
Set up the test configuration by making all cable connections between the item-under-test and the station. Secures connectors to the proper torque where required.
Review test data for failures and fills out paperwork to report failures.
Operate commercial and custom test equipment including computer controlled test stations, oscilloscopes, digital multimeters, logic analyzers, chart recorders, and thermal chambers.
Use, interpret and critique circuit and product drawings, and test documents such as specifications and procedures.
Use application software on test stations that run under various operating systems, and able to execute batch files.
Troubleshoot flight hardware under the guidance of an engineer. Fills out paperwork to rework the hardware.
Troubleshoot and repair test stations under the guidance of an engineer.
Set up test stations for usage by following instructions and diagrams in equipment documents. May involve finding missing equipment and cables.
Review and prepare test data for unit selloff.
Use computer application software such as word processing and spreadsheets.
Perform incidental related duties as assigned or required.Takes units through environmental testing at other facilities by scheduling use of facility, moving equipment to test facility, setting up unit, and testing the unit during the environmental exposure.
What You’ll Need:

Vision Test
 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.



Education & Experience:

High School Diploma/GED combined with 1 + year of relevant work experience.
 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/
 
Job Number: Job ID # 2020-11540
Job Location: Huntsville, AL
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 6 Months
Input Date: 07/22/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler B

Description:
Assembler B

Job ID # 2020-11540

Contract Opportunity

Location: El Segundo, CA

Industry: Aerospace & Defense

Minimum Education: High School Diploma

Minimum Experience: 1 Year

 

What You’ll Do:

Work from test and planning documents, circuit and product diagrams, equipment manuals, and verbal and written instructions.
Lay out and determine standard methods and sequences to test and troubleshoot complex digital electronic subassemblies, slices and units by performing operations such as inspections, wire checks, component verifications, and functional testing under various environmental conditions.
Set up the test configuration by making all cable connections between the item-under-test and the station. Secures connectors to the proper torque where required.
Review test data for failures and fills out paperwork to report failures.
Operate commercial and custom test equipment including computer controlled test stations, oscilloscopes, digital multimeters, logic analyzers, chart recorders, and thermal chambers.
Use, interpret and critique circuit and product drawings, and test documents such as specifications and procedures.
Use application software on test stations that run under various operating systems, and able to execute batch files.
Troubleshoot flight hardware under the guidance of an engineer. Fills out paperwork to rework the hardware.
Troubleshoot and repair test stations under the guidance of an engineer.
Set up test stations for usage by following instructions and diagrams in equipment documents. May involve finding missing equipment and cables.
Review and prepare test data for unit selloff.
Use computer application software such as word processing and spreadsheets.
Perform incidental related duties as assigned or required.Takes units through environmental testing at other facilities by scheduling use of facility, moving equipment to test facility, setting up unit, and testing the unit during the environmental exposure.
What You’ll Need:

Vision Test
 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.



Education & Experience:

High School Diploma/GED combined with 1 + year of relevant work experience.
 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/
 
Job Number: Job ID # 2020-11540
Job Location: Huntsville, AL
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 6 Months
Input Date: 07/22/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler B

Description:
Assembler B

Job ID # 2020-11541

Contract Opportunity

Location: El Segundo, CA

Industry: Aerospace & Defense

Minimum Education: High School Diploma/GED

Minimum Experience: 1 Year

 

What You’ll Do:

Work from schematics, test procedures and specifications, data sheets, wiring diagrams, software instructions and verbal and written instructions.
Utilize specialized and commercial test equipment, computers and related equipment to perform manual and automated evaluation, performance and environmental tests on power supplies and power related units.
Troubleshoot, using standard or established procedures and methods, hardware and equipment including minor unit manipulations, tear downs, select resistors for installation and performing wire and component checks.
Assist in unit diagnostics including rework recommendation. Performs unit retests, special setup testing and extended (time) environmental test.
May assist engineering in final checkout and redlining of new test procedures, test equipment drawings, test fixtures and software.
Perform test data management activities including data trending and evaluation, collects and documents test data and other metrics, initiates test anomaly reports and makes verbal and written reports as required.
Assist with issues involving rework and parts with engineering and manufacturing. Arranges the movement of flight hardware and test equipment.
Meet necessary certification as required.
Perform incidental related duties as assigned or required.
What You’ll Need:

Vision Test
 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.



Education & Experience:

High School Diploma/GED combined with 1 + year of relevant work experience.
 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/
 
Job Number: Job ID # 2020-11541
Job Location: El Segundo, CA
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 6 Months
Input Date: 07/22/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Assembler D

Description:
Chipton-Ross is seeking 65 Assembler D's located in San Antonio, TX.

RESPONSIBILITIES:
1. Perform production installations, maintenance*, preventative maintenance** and alterations*** on aircraft structure, systems and sub-systems, including electrical and avionics on standard or experimental certificated aircraft. Troubleshoot, inspect, test, repair, service aircraft and engine systems to prepare aircraft for flight. Initiate and document any nonconforming materials, hardware, software, tools, parts, assemblies, or portions thereof, according to specifications, processes, and procedures.

2. Perform audit/surveillance of all manufacturing and quality assurance processes, according to specifications, processes, and procedures. Perform functions such as: Customer/FAA Coordination, Configuration Change Verification, Conformity Inspections, Airworthiness Inspections (including Pre-flight and Post-flights), Corrective Action and Investigations. Initiate and document any nonconforming materials, hardware, software, tools, parts, assemblies, or portions thereof, according to specifications, processes, and procedures. May perform Aviation Maintenance Technician tasks in order to obtain and maintain knowledge, skills and required certifications.


DEFINITION OF TERM:
Maintenance* means inspection, overhaul, repair, preservation, and the initial installation and/or replacement of parts.
Preventive maintenance** means simple or minor preservation operations and the replacement of small standard parts not involving complex assembly operations.
Alterations*** means modifications that permanently or temporarily change an airplane from its original design configuration

Associated Duties and Responsibilities:
1. Use technical specifications, sketches, manuals, drawings, engineering instructions and FAA forms and publications to accomplish work assignment.
2. Maintains Company and FAA required records and inspection forms.
3. Maintain a safe, clean and organized work environment.
4. Plan and organize the sequence of your own work package in such a way as to promote safe, efficient operation and meet predetermined schedules in a timely manner.
5. Operate any and all types of information systems required to perform assigned tasks. Including but not limited to Company WEB based systems and Microsoft Office products.
6. Interpret and perform to the requirements of airworthiness directives, service bulletins, service letters and other approved/accepted data.
7. Apply applicable mathematical calculations to setup and use precision measuring tools, to measure gaps, heights, angles, hole diameters and depths.
8. Make production aids to facilitate work assignment.
9. Maintain necessary certifications, licenses and permits as required for assigned work.
10. As assigned, exchange information with suppliers, customers or other company representatives to explain or demonstrate operations, tests or difficulties.

PREFERRED EXPERIENCE:
737 experience preferred

EDUCATION:
Education/experience typically acquired through basic education (e.g. High School diploma/GED) and typically 7 or more years' related work experience or an equivalent combination of education and experience (e.g. vocational school/Associate+5 years' related work, Bachelor+2 years' related work, etc.).

WORK HOURS:
Full-Time/First Shift
5:30 AM - 2:30 PM
 
Job Number: 185841
Job Location: San Antonio, TX
Rate: $DOE
Duration: 7 months
Input Date: 05/18/2020
Last Updated: 09/23/2020
Firm Name: CHIPTON ROSS
Attention: Christopher Conaway
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: cconaway@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Associate Software Quality Engineer

Description:
Associate Software Quality Engineer

Job ID # 2020-11539

Contract Opportunity

Location: Sterling Heights, Michigan

Industry: Aerospace & Defense

Minimum Education: Bachelor’s Degree

Minimum Experience: 1 year

 

What You’ll Do:

Software Quality Planning - Plan and document software quality assurance activities, including audit plan and schedule, measurement plans and infrastructure, participation in overall software planning efforts, software reliability planning, software test planning, overall project scheduling and other planning tasks as required
Software Quality Auditing - Monitor software development process compliance using a robust audit program as documented in the plan, meeting requirements of internal quality and software procedures, as well as Capability Maturity Model Integration (CMMI) level 5 provisions for PPQA. Report results, track corrective action, establish and maintain measures of the software quality audit activities.
Provide technical review and oversight of Software Development work products.
Perform product audits, participate in technical peer reviews, evaluate deliverable documentation, participate in any software supplier activity, evaluate formal software change documentation including file differences, test results and change descriptions.
Report results, track and manage corrective action, elevate issues, establish and maintain measures and summary reports of this activity.
Provide other program support as required.
Participate in program meetings, formal reviews, change board meetings, measurement reviews.
Support customer interface activities, and interface with external.
Validate formal test environment and participate in formal requirements verification activities.
Perform tasks in other areas of Quality Assurance as may be assigned
What You’ll Need:

Applicant must be able to implement the activities identified above in the detailed work description.
Must demonstrate a passion to learn about company products and the quality activities involved in their development
Proficient in Microsoft Office suite.
Applicant must have the ability to read and understand software application code, effectively navigate project directories, configuration management tools, and requirements management tools.
Familiarity with software measurement techniques desirable
Familiarity with content of CMMI desirable
Familiarity with disciplined software development lifecycle.
Ability to utilize a personal computer
Ability to work alone in a self-motivated fashion as well as supporting a team effort.
Familiarity with military vehicles a plus
 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.



Education & Experience:

Bachelor’s Degree required, preferably in Engineering, combined with 1 + year of relevant work experience.
 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

 
 
Job Number: Job ID # 2020-11539
Job Location: Sterling Heights, MI
Rate: Open
Per Diem: No
Overtime: Possible
Input Date: 07/22/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Automation Software Developers

Description:
OOP-object oriented programming, high speed
 
Job Location: Midwest
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: ccastro@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Software Engineer / Developer

Description:
Seeking a talented and motivated Avionics Software Engineer to join our Avionics Team.
MUST BE US Persons.
The ideal candidate will have experience with software development programs in aerospace or similar field. We are looking for someone who enjoys working in an embedded software environment, with an emphasis on safety-critical aerospace projects.

Required Knowledge/Experience
• Experience with aerospace software projects
• Experience with C and C++ embedded software
• Experience with bare metal and RTOS software
• Experience with VHDL and/or Verilog
• Experience with GLStudio or opengl based display frameworks

Desired Knowledge/Experience
• Experience with VxWorks
• Experience developing software for DO-178 certification
• Experience with softcore processors and system-on-chip
• Experience with VHDL and/or Verilog
• Experience with the Atlassian software project management suite including JIRA, Bitbucket (Git), Confluence, and Crucible


Responsibilities
• Develop and maintain avionics software applications through the complete software lifecycle
• Actively participate in code reviews, requirements development, internal audits, and other software-related development activities
• Monitor program performance after implementation to prevent reoccurrence of program problems and ensure efficiency of operations
• Participate in risk management meetings

Educational Requirements:
Must have a Bachelor of Science degree in Software Engineering or a related engineering discipline from an accredited university, or equivalent combination of work experience and education

Professional Requirements:
• 4 or more years of software development programs in aerospace or similar field
• Experience with safety critical embedded system hardware and software
• Experience with real-time operating systems
• Strong foundation of fundamentals of electrical engineering
• Strong organizational and written communication skills
• Applicants must be U.S. persons as defined by the ITAR


The Structures Company is an AA/EOE.
 
Job Number: 406
Job Location: Mojave, CA
Rate: ***DOE***
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 09/21/2020
Last Updated: 09/22/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Business Systems Analyst 1 - Compliance

Description:
Purpose and Scope: 

Under direct supervision, formulate and define systems scope and objectives through user needs and an understanding of business systems and industry requirements.

Essential Responsibilities:
 
  1. Participate in key initiatives to enhance IT Compliance
  2. Assist with application user security setup including request ticketing and user setup within applications such as Deltek Costpoint, IBM Cognos, Deltek Time & Expense, and others.
  3. Perform and support formal and informal application security audits.
  4. Work with cross-functional teams to review application security setup and implement application security design changes to help meet the organizations visions and goals.
  5. Assist in maintaining IT business system compliance with FAR, DFARS, ITAR, and SOX.
  6. Evaluate control gaps and document findings including corrective action plans.
  7. Design or modify system reports, security access rules and system constraints.
  8. Write and test procedures.
  9. Prepare detailed documented requirements for selected activities.
  10. May provide administrative support to project management staff in customer meetings, presentations and briefings.
  11. Maintain and establishes a filing system for correspondence, project status report, and other technical documentation for tracking and inventory control.
  12. Comply with hardware and software systems standards and procedures.
  13. Perform all other position related duties as assigned or requested.


 
Job Number: 1910107368
Job Location: San Antonio, TX
Duration: 6 months
Input Date: 01/13/2020
Last Updated: 09/23/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Peter Pham
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: cecjdallasav@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fMewQAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CL - Advanced Software Engineer

Description:
CL - Advanced Software Engineer

Job ID # 2020-11543

Contract Opportunity

Location: McLeansville North Carolina

Industry: Aerospace & Defense

Clearance Requirement: Ability to Obtain Secret Clearance

Minimum Education: Bachelor’s Degree

Minimum Experience: 5 Years

 

What You’ll Do:

Perform software requirements analysis, participate in research, designs, develop and test software and tools, to include development of new work products or enhancing existing applications, systems or embedded products
Code, test, integrate and document software solutions
Apply principles and techniques of computer science, engineering, and mathematical analysis to the development of complex software and architectures
Participate in internal review of software components and systems
Independently determines approach to solutions
Follow standard practices and procedures in analyzing situations or data from which answers can be readily obtained
Contribute and accountable to the completion of major programs and projects
Provide leadership and/or direction to lower level employees and teams
Build stable working relationships internally
Network with senior internal and external personnel
Travel may be required
What You’ll Need:

Proficiency in writing software in C/C++, Java, Python, JavaScript/Node.js
Real Time development, Networking, TCP/UDP sockets, Multicasting
Proficiency in developing in Linux and Windows environments
Proficient knowledge of software tools supporting Integrated Development Environments (IDE), version control (GitLab, Subversion), task management (JIRA), defect reporting
Understanding of software engineering concepts, principles, and theories
Familiarity with UML, model driven development and test driven design
Experience with Agile software development
Experience with the following (desirable but not required): AndroMDA code generation framework, MATLAB, shell scripts, Maven, Jenkins, virtual machines, containers
Detailed and proficient knowledge of technology trends and champions new ideas and product and process improvements
Self-motivation, engagement, continuous learning and looking for ways to improve yourself and our products/processes/others
Initiative on assignments and observed gaps (helping outside primary responsibilities)
Effectively participate on Integrated Product Teams as a both a software individual contributor and team lead/mentor
Proficient written and verbal communications skills
An open mind and personal disposition. Ability to give and take constructive feedback cheerfully for the purposes of continuous improvement.
Proficient ability to use the appropriate standards, processes, procedures, and tools throughout the software development life cycle to support the generation of technical engineering products
Agile experience preferred.
 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.



Education & Experience:

Bachelor’s Degree in Software Engineering or a related technical field, combined with 5 + years of relevant work experience; or Master’s Degree combined with 3 + years of relevant work experience.
 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/
 
Job Number: Job ID # 2020-11543
Job Location: McLeansville, AL
Rate: Open
Per Diem: No
Overtime: Possible
Input Date: 07/23/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

CNC Machinist - Mazatrol

Description:
PDS TECH INC is currently looking for a SENIOR CNC Machinist  for our client in Santa Clarita. 

Requirements include:
Minimum of 7-10 years machining experience using conventional and CNC machines; 5 years of experience programming 5 axis CNC, creating tooling, fixtures and manufacturing processes to manufacture components using Mastercam.

5 years’ experience with Espirt, Surfcam, BobCad, PowerMill, HyperMill, Gibbs or Mazatrol software. Experience in modifying engineering models for the appropriate CNC machines. 
Experience in designing CAD models.
Experience in developing manufacturing process to machine complex parts. 
Complete understanding of reading blueprints and drawings. 
Expert in precision measuring and layout tools.
Knowledgeable of metallurgy, heat treatment and machining tools. 
PC Proficiency.
Experience with lathes Mills-Horizontal and Vertical. CNC Milling Machines; CNC Turning Center; Drill press; Band and. Horizontal saw and Deburring with hand tools.
Experience with had CNC mulitaxis grinding background would be preferred.

US Citizenship required.

If you are interested, please call DJ 714-384-0004 and send resume to: denglert@pdstech.com
 

 
Job Number: 2010116327
Job Location: Santa Clarita, CA
Per Diem: No
Duration: 12 months
Input Date: 07/17/2020
Last Updated: 09/23/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: DJ Englert
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003OxxwQAC&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Chief Electrical Engineer - Lead

Description:
We need a talented electrical engineering lead with a demonstrated track record in designing complex electrical systems on safety critical vehicles. This lead will work closely with mechanical, software, and other cross-functional leads to oversee the electrical architecture of an all-electric VTOL aircraft, including but not limited to high-voltage powertrain systems, low-voltage electronics, and high-speed data transmission. Directing teams to optimize designs for reliability, weight, efficiency, and certification will be a focus.

Responsibilities
· Oversee the design, development and execution of the aircraft’s electrical systems.
· Own the requirements for the aircraft’s electrical architecture.
· Collaborate with various company departments to ensure equipment and low-level designs meet all system and aircraft-level requirements
· Lead, train and mentor the electrical engineering team.Required
· Experience bringing electrical hardware involving high-speed and high-voltage design from concept to production.
· Strong EE fundamentals, including familiarity with high-voltage power conversion and distribution, motor control, signal conditioning and conversion, discrete semiconductor design, and low-voltage power distribution.
· Hands-on experience with building and debugging electrical hardware.
· 10+ years of related technical lead experience.Preferred
· Experience leading a team of engineers to bring a piece of electrical hardware from concept through the design assurance and certification process (DAL, ASIL, SIL).
· Understanding of RTCA DO-160 and practical design guidelines for meeting required environmental qualification levels for airborne electrical hardware.



The Structures Company is an AA/EOE.
 
Job Number: 380
Job Location: Northern CA
Rate: OPEN - **DOE**
Duration: DIRECT POSITION
Start Date: ASAP
Input Date: 07/31/2020
Last Updated: 08/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Communication Systems Engineer

Description:
This position involves designing and implementing wired and wireless communications systems on the spacecraft and interfacing with the ground systems, including ground stations and operations center. The communications engineer will:
  • Develop, document, and validate subsystem requirements
  • Coordinate with electrical, mechanical, avionics, and software teams
  • Perform link analysis and design
  • Select components to meet requirements
  • Integrate communication system components on spacecraft and ground systems
  • Plan and execute communication system testing
  • Support flight operations, analyze subsystem performance, and troubleshoot if needed
  • Assess, track, and report subsystem status to project leads


The scope of the communications engineering position includes:

  • RF communications
  • Link budgets
  • Modulation and encoding schemes
  • SpaceWire and RS-422 communication
  • Encryption technologies
  • Antennas and feed systems
  • Software-defined radio
  • CCSDS standards
  • Spacecraft ranging and tracking
  • Testing of spacecraft, payload, and ground communications


Desired skills, experience, and attributes:

  • Bachelor's degree or higher in an engineering discipline
  • 2+ years experience with RF communications
  • Knowledge of digital communication systems
  • Hands-on experience with mechanical or electrical systems
  • Experience in C/C++, Python, MATLAB, or LabVIEW
  • Excellent written and verbal communication skills
  • Ability to work independently with minimal supervision
  • Must be a “U.S. person” as defined by the ITAR (22 CFR §120.15)


 
Job Number: 2010115013
Job Location: Mojave, CA
Duration: 36 months
Input Date: 06/03/2020
Last Updated: 09/23/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003Ot7AQAS&URLSource=cjhunter

Complaint Investigator/Quality Engineer

Description:
Chipton-Ross is seeking a Complaint Investigator/Quality Engineer for an opening in Kalamazoo, MI.

RESPONSIBILITIES:
This position coordinates the customer complaint handling and investigation process, providing a key interface between the Customer and the QA/Operations/Engineering complaint investigation teams. This position also supports investigation and closure of internal and external non-conformances.
" Responsible for the initial QA review of customer complaints and requesting information/facts from Customer or the Distributor as required.
" Responsible for the customer complaint handling process, including logging complaints and performing assessments to determine potential reportability.
" Responsible for the maintenance of data and reporting of key trends in the electronic complaint handling system.
" Responsible for monitoring the progress of complaint handling and investigation, and working with applicable individuals and departments to ensure complaint handling time requirements are met.
" Responsible for tracking and trending complaints and preparing complaint analysis reports, highlighting any adverse trends.
" Responsible for highlighting any potential reportable events to QA and/or RA Management as soon as possible as per the Medical Device Reporting/Vigilance procedures.
" Responsible for preparing & presenting data/reports regarding complaint metrics for submission to site and Corporate Management Review.
" Responsible for planning & performing non-conformance investigations. This may include coordinating the return of parts involved in investigations back to the factory for further investigation.
" Responsible for contributing to the continual quality & reliability improvement of company products.
" Maintain working relationships with company-wide strategic partners and third party organizations.
" Ensure policies, procedures and practices are in compliance with global quality & regulatory requirements and meet the needs of our customers & Quality Policy.
" Responsible for performing tasks to support the quality system and quality policy as directed by QA management.

REQUIRED EXPERIENCE:
" Experience working with FDA regulated products (Medical Device/IVD preferred)
(pharmaceutical or dietary supplement experience is acceptable)
" Knowledge of ISO13485 / FDA QSR Part 820 / 803 requirements preferred
" Experience working with complaint handling
" Knowledge of statistical data analysis tools and techniques
" Excellent interpersonal skills
" Ability to work in a timeline driven environment
" Excellent communication skills both written & oral
" Excellent computer skills, particularly spreadsheets/graphical software tools (e.g. Excel)

EDUCATION:
Accredited Associate or Bachelor's Degree required

WORK HOURS:
M-F; 1st Shift (8:00am-4:30pm)
Full-Time


 
Job Number: 186522
Job Location: Kalamazoo, MI
Rate: $25 to $30.00 DOE
Duration: 6-12 Months
Input Date: 07/15/2020
Last Updated: 09/23/2020
Firm Name: CHIPTON ROSS
Attention: Zachary Fasano
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: zfasano@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Components Engineer - WA State

Description:
•Work with design engineers conducting part selection and verify compliance
•Review manufacturer's data for compliance including datasheets, material declarations, change notices, qualification and screening flows, and Production Part Approval Process (PPAP) data packages
•Review and make recommendations based on Destructive Physical Analysis (DPA) test reports.
•Work with manufacturers to acquire required documentation and coordinate testing with outside test houses.
•Author non-standard part approval requests.

Qualifications:
•Bachelor's degree in electrical, or mechanical engineering, or a related field
•Experience working EEE (Electrical, Electronics, Electro Mechanical) part selection/compliance in the aerospace, automotive, or medical fields.
•Experience with one or more of the following standards: EEE-INST-0002, AEC-Q100/101/200, SMC-S-010/011.
•Experience reviewing Production Part Approval Process (PPAP) documentation.
•Strong attention to detail, desire to solve problems, and drive to resolve technical issues.
•Strong verbal and written communication skills and ability to interface with software systems, databases and Microsoft Office Suite.

Must be a U.S. citizen or permanent resident
Desired:
•5+ years working EEE part selection/compliance in the aerospace, automotive, or medical fields.
•Experience with semiconductor or other EEE component manufacturing.
•Experience with tin whisker mitigations and probabilistic analysis.
•Understanding of physics of failure.
•Experience with EEE component failure analysis.
 
Job Number: WA2598
Job Location: Renton, WA
Rate: Hourly Rate Open
Per Diem: YES
Overtime: Possible
Duration: 12 Months
Start Date: 2/3 wks from offer
Input Date: 06/16/2020
Last Updated: 07/30/2020
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

County Technician

Description:
Position Title: County Technician
Description: Individual will be trained in the successful setup and operation  of voting equipment products, with the intent of providing technical and operational support to the election staff of an assigned county.
Job Duties
Interface with customers as the on-site support source for our products and the first tier of technical and operational support in system usage.
Serve as the communication liaison between the company and the County Election Officials via in-person, telephone and email interaction as required for:
  • Proper operation of the system components;
  • Maintenance of voting system components.
  • Coordination of the RMA process when necessary.
  • Assisting in pre-election and post-election Logic and Accuracy Testing.
  • Training of associates and customers on products and procedures.
  • Training temporary county staff during the election cycle as required.
  • Ancillary election activities as required.
  • Assist with the maintenance of all records related to voting system components by completing and submitting all required and necessary paperwork.

Documents and reports all anomalies and issues encountered for all hardware and software products.
Adheres to all local, state, and federal rules and regulations that pertain to the operation of election systems.
Ensures compliance with product warranty requirements.
Identifies and describes product issues to contribute to ongoing product development
Education, Experience and Skills:
Minimum Requirements
 
  • Minimum of a high school diploma or GED;


  • Minimum of one (1) year of related computer maintenance work experience;


  • Experience using various technological operating systems;
  • Some customer service work experience;
  • Valid Driver’s License
  • Clean background check, no criminal record of any type;
  • Cannot be active in political cause or political party activities


Preferred Qualifications
 
  • Minimum of one (1) year of experience performing setup and maintenance work on computer equipment preferred.
  • Preferred CompTIA A+ Certification
  • Experience in working in an election environment is desirable, but not mandatory
  • Experience working in an election environment or polling site is desirable



Skills:

  • Working knowledge of service set-up, repairing and maintaining computer equipment and machinery;
  • Understanding of the hazards and safety precautions involved in repairing and maintaining computer equipment and the related software used in computer equipment.
  • Ability to troubleshoot and identify system problems and replace as necessary using various hand tools and equipment.
  • Ability to explain and/or demonstrate equipment operations to others.
  • Ability to understand and follow oral and written instructions and maintain effective working relationships with associates and the general public.


Physical Conditions & Work Contacts:
Requires the ability to lift and carry items weighing 20-50 pounds, with occasional lifting of items weighing up to 50 pounds. Requires ability to work a flexible schedule.

Ability to travel to an assigned county location from home or to overnight stay in that county during the week. 

Ability to work evenings and weekends when the preparation tasks of the election cycle require it.
 
 
Job Number: 2010113317
Job Location: Smyrna, GA
Duration: 2 months
Input Date: 03/18/2020
Last Updated: 09/23/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Jason Andrzejewski
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Email: cecjnrt@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fr5kQAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Creo Design Engineer ( Beltsville, MD ) 10350832

Description:
Design Engineer ( Beltsville, MD ) 10350832
6 Month Contract

Pay rate: $50/hr maybe more for the right candidate

LOCAL CANDIDATES ONLY!

This position:
• Contributes to the design of major Integrated Thermal Systems components or major portions of a functional system to develop or improve products and facilitate manufacturing operations.
• Utilizes computer-aided design (CAD) equipment, develops basic data and makes preliminary layouts, sketches and notes necessary to present design proposals to internal and external customers.
• Creates layouts and drawings of complex assemblies and details parts of devices, mechanisms, and structures.
• Investigates pertinent design factors such as ease of manufacture, availability of materials and equipment, interchangeability, strength-weight efficiency, and contractual specification requirements and cost.
• Checks completed layouts and drawings for clarity, completeness, conformity to standards, procedures, specifications, and accuracy of calculations and dimensioning.
• Identifies design errors, omissions, and other deficiencies, and recommends revisions and/or improvements in design layout to fellow responsible engineers or designers.
• Supports development of technical solutions to complex problems which require regular use of ingenuity and creativity.
• Applies current technology and aids in the development of new technologies.
• Interacts with senior internal and external personnel on significant technical matters often requiring coordination between organizations.

Skills / Experience
• Current experience generating solid models and drawings in PTC Creo Parametric (Pro-E) 4.0 or higher a must: 14,000 hours.
• Experience in advanced assembly techniques in Creo Parametric including skeleton driven top-down design, simplified reps and other large assembly management techniques.
• Experience in Pro/INTRALINK 11.0 or higher. Recent experience in Winchill or similar PDM/PLM software may be considered.
• Experience applying and interpreting ASME Y14.5 drawing standards.
• Knowledge of applying and interpreting Geometric Dimensioning and Tolerancing (GD&T) to drawings.
• Experience with Teamcenter a plus.
• Experience with MS Office Suite (Word, Excel, PowerPoint).
• Strong written and oral communication skills.
• Strong interpersonal skills.
• Ability to clearly present technical information.
• Strong customer service skills.
Additional Requirements
• Able to work seated/standing at a desk in five hour increments.
• Requires repetitive arm, hand, and wrist movements in five hour increments.
• Occasionally lift up to 25 pounds.

Education
BS in Engineering and 7 years minimum of relevant industry experience required or Masters in Engineering and 5 years minimum of relevant industry experience required.
 
Job Number: 10350832
Job Location: Beltsville, MD
Rate: Open
Per Diem: Yes
Overtime: yes
Duration: 6 Months
Start Date: ASAP
Input Date: 07/12/2020
Last Updated: 07/26/2020
Firm Name: TALENTPRO CONSULTING
Attention: TIMOTHY Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

Customer Training Specialist 4

Description:
Chipton-Ross is seeking a Customer Training Specialist 4 for an opening in Hazelwood, MO.

RESPONSIBILITIES:
Conducts analyses to evaluate customer technical training needs to determine appropriate training content, objectives and design. Oversees activities the development, delivery and evaluation of technical training. Establishes processes for identifying training content and evaluating training effectiveness. Uses specialized software technology to research, configure, maintain, update and develop new and existing media and materials. Gathers data to support complete proposal development activities. Ensures accuracy and quality of training products. Coaches and develops others.

REQUIRED EXPERIENCE:
Basic Qualifications:

Minimum of 7 years' experience with maintenance working on the egress systems
Minimum of 2 years experience working on F-15 aircraft

AND/OR

Minimum of 7 years' experience with maintenance working on AFE/Life Support systems and equipment
Minimum of 2 years experience working on F-15 aircraft

AND/OR

Minimum of 7 years' experience with maintenance working on Armament systems and equipment
Minimum of 2 years experience working on F-15 aircraft

Preferred Qualifications:

Skills equivalent to the USAF Craftsman (7-level) in a like position/systems. Applicable and appropriate educational/certification credentials from an accredited institution and/or equivalent experience is required.
Minimum of 3 years' experience with training courseware development with platform instructions

**NOTE** An individual with a combination of the basic qualifications would be ideal.


EDUCATION:
Accredited Technical Bachelor's degree and typically 9 or more years' related work experience or a Master's degree with typically 7 or more years' or a PhD degree with typically 4 or more years' related work experience or an equivalent combination of education and experience. A technical degree is defined as any four year degree, or greater, in a mathematic, scientific or information technology field of study.

FULL TIME/1ST SHIFT
WORK HOURS: 7:00 AM - 3:30 PM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 186297
Job Location: Hazelwood, MO
Rate: $DOE
Duration: 12 Months
Input Date: 06/25/2020
Last Updated: 09/23/2020
Firm Name: CHIPTON ROSS
Attention: Rochelle Anderson
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: randerson@chiptonross.com
Website: www.chiptonross.com

Customer Training Specialist 4

Description:
PDS Tech is seeking a Customer Training Specialist  for an open position in Hazelwood, MO
In your role, you will: 

Email resume to: mmccarthy@pdstech.com or contact Mary Ann McCarthy @ 314-504-6039

  • Conducts analyses to evaluate customer technical training needs to determine appropriate training content, objectives and design. Oversees activities the development, delivery and evaluation of technical training. Establishes processes for identifying training content and evaluating training effectiveness. Uses specialized software technology to research, configure, maintain, update and develop new and existing media and materials. Gathers data to support complete proposal development activities. Ensures accuracy and quality of training products. Coaches and develops others.

Basic Qualifications:



• Minimum of 7 years' experience with maintenance working on the egress systems

• Minimum of 2 years’ experience working on F-15 aircraft

• Minimum of 7 years' experience with maintenance working on AFE/Life Support systems and equipment

• Minimum of 2 years’ experience working on F-15 aircraft



Preferred Qualifications:



• Skills equivalent to the USAF Craftsman (7-level) in a like position/systems. Applicable and appropriate educational/certification credentials from an accredited institution and/or equivalent experience is required.

• Minimum of 3 years' experience with training courseware development with platform instructions

Train AFE/Life Support maintenance technicians in support of F-15QA aircraft

• Skills equivalent to the USAF Craftsman (7-level) in a like position/systems. Applicable and appropriate educational/certification credentials from an accredited institution and/or equivalent experience is required.

• Minimum of 3 years' experience with training courseware development with platform instructions
 
Job Number: 2010115740
Job Location: Hazelwood, MO
Duration: 12 months
Input Date: 06/22/2020
Last Updated: 09/23/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003OvbBQAS&URLSource=cjhunter

Customer Training Specialist 4 - F-15QA Aircraft

Description:
**Must be able to obtain a Secret Clearance. US Citizenship Required**

Job Description:
Train egress maintenance technicians in support of F-15QA aircraft

Conducts analyses to evaluate customer technical training needs to determine appropriate training content, objectives and design. Oversees activities the development, delivery and evaluation of technical training. Establishes processes for identifying training content and evaluating training effectiveness. Uses specialized software technology to research, configure, maintain, update and develop new and existing media and materials. Gathers data to support complete proposal development activities. Ensures accuracy and quality of training products. Coaches and develops others.


**An individual with combined Egress and AFE/Life Support Skills would be ideal.**

Basic Qualifications:
• Minimum of 7 years' experience with maintenance working on the egress systems
• Minimum of 2 years’ experience working on F-15 aircraft
• Minimum of 7 years' experience with maintenance working on AFE/Life Support systems and equipment
• Minimum of 2 years’ experience working on F-15 aircraft

Preferred Qualifications:
• Skills equivalent to the USAF Craftsman (7-level) in a like position/systems. Applicable and appropriate educational/certification credentials from an accredited institution and/or equivalent experience is required.
• Minimum of 3 years' experience with training courseware development with platform instructions
Train AFE/Life Support maintenance technicians in support of F-15QA aircraft
• Skills equivalent to the USAF Craftsman (7-level) in a like position/systems. Applicable and appropriate educational/certification credentials from an accredited institution and/or equivalent experience is required.
• Minimum of 3 years' experience with training courseware development with platform instructions

**NOTE** An individual with combined Egress and AFE/Life Support Skills would be ideal

Job requires FAA ATP or Commercial certificate with the appropriate endorsements, and FAA Instructor certificate or military instructor certification, as applicable.
Technical bachelor's degree and typically 9 or more years' related work experience or a Master's degree with typically 7 or more years' or a PhD degree with typically 4 or more years' related work experience or an equivalent combination of education and experience. A technical degree is defined as any four year degree, or greater, in a mathematic, scientific or information technology field of study.
 
Job Number: 374526
Job Location: Hazelwood, MO
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 06/25/2020
Last Updated: 09/23/2020
Firm Name: CTS INTERNATIONAL
Address: 160 NW GILMAN BLVD STE 250
City, State: ISSAQUAH, WA 98027
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

DOD - Technician - Test - Level 3

Description:
PDS Tech, Inc. is seeking a Test Technician in Clearwater, FL
***Weekend Shift : Fri-Sun (6pm-7am)***

Summary:
  • Performs standard testing processes on a variety of equipment and records and analyzes results.
  • Requires knowledge of industry specific tests and testing equipment.
  • May recommend changes in testing methods or equipment changes.
  • Familiar with standard concepts, practices, and procedures within a particular field.
  • Relies on experience and judgment to plan and accomplish goals.
  • Conduct performance and diagnostic testing with automated and manual test operated equipment.
  • Perform Automated System Level Testing by following detailed written procedures and applying knowledge on the job experience on multiple segments.
  • Handle and process customer material, test records, and associated documentation.
  • Document system level events and failures for repair and supply detailed information within eFactory for reliability requirements.
  • Perform and complete varied tasks through the use of knowledge-based experience, adhering to work instructions and applying policies and procedures.
  • Perform test set-up and teardown of associated equipment and cables, storing in designated locations when not in use.
  • Utilize product & process knowledge to conduct high level troubleshooting.
  • Support the flexible workforce initiative training and working across multiple test cells and products.
  • Coach, mentor, and train Interact with other Test Team members.
  • Collaborate with Engineering and other support personnel to identify improvements to equipment, processes, and overall productivity.
  • Coordinate with Engineering and pertinent support personnel to resolve equipment, software, and procedural issues or failures.
  • Comply with detailed instructions on all work applying policies and procedures
  • Utilize tools, computers, and office equipment as required to complete job related tasks.

Prerequisites:
  • Minimum HS; preferred Associate, Technical, or military equivalent.
  • Must be a US Citizen only.
  • Must have an active Secret Clearance.
  • 2+ years of experience in the field or in a related area.

 
Job Number: 2010116059
Job Location: Clearwater, FL
Duration: 6 months
Input Date: 07/02/2020
Last Updated: 09/23/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Casey Carrion
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Email: cecjnrt@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003OwrtQAC&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Data Analyst/Programmer IV

Description:
Description:
Healthcare experience is REQUIRED. Candidate must have at least one year of healthcare experience required to qualify for the position.
Experience with SQL, SSIS, SSRS, Power BI


Summary:
Access and integrate data from the various healthcare systems (QNXT, Medlnsight, pharmacy,etc.), create actionable management reports that can be used to analyze costs and quality, analyze results and identify opportunities to manage costs and improve quality. Report observations to manager, pointing out areas of concern inaccuracy, cost trends, and efficiency.

Essential Functions: Extract and upload information including large data sets from various systems to support team needs. This resource is utilized for ad hoc requests for pharmacy, medical expenses, and enrollment data by other members of the team. Assist in preparation of reports produced regularly to support executive decision-making. Research and analyze report results identifying opportunities and trends. Develop efficient reporting methods. Support team members when additional analytics are required for medical costs.

Knowledge/Skills/Abilities:
Ability to be a self-starter, motivated, energetic worker with an interest in learning the healthcare system or other BI software. Knowledge of healthcare and prescription drug claims data Proficiency with Microsoft Office, Including Excel, Word and PowerPoint Ability to use data cubes to extract data and reports from Medlnsight. Good verbal and written communication skills Good interpersonal and problem solving skills.

Ability to abide by company policies
Maintain regular attendance based on agreed-upon schedule
Maintain confidentiality and comply with Health Insurance Portability and Accountability Act (HIPAA)
Ability to establish and maintain positive and effective work relationships with coworkers, clients, members, providers and customers Required

Education: BA or BS in Biostatistics, Public Health, Statistics, Mathematics, or Health Care or related field required. Required Experience: 10+ years of relevant work experience.

Experience with MS Office applications required, especially strong Excel skill. Alternate programming experience may substitute. Experience with data management and analysis preferred. Must have strong quantitative and analytical skills. Some experience in health care industry or pharmacy claims desired.
 
Job Number: t3257
Job Location: Irvine, TX
Rate: $55 to $65
Per Diem: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 08/05/2020
Last Updated: 08/19/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Data Engineer

Description:
A Data Engineer in Greenville, SC is currently available at Belcan. This is a contract opportunity that will provide complete application life-cycle development, deployment, and operations support for Big Data solutions and infrastructure. In this role, you will partner with product owners, data scientists, solutions engineers, and business analysts to facilitate the development, automation, and seamless delivery of analytics solutions into Big Data clusters.



Data Engineer job duties:

* Implement and enhance complex big data solutions with a focus on collecting, parsing, managing, analyzing, and visualizing large data sets that produce valuable business insights and discoveries.
* Determine the required infrastructure, services, and software required to build advanced analytics solutions, both on premise and in the cloud.
* Develop prototypes and proof of concepts for specified business challenges.
* Assist data scientists with exploration and analysis activities.
* Understand advanced algorithms and apply problem solving experience to build high-performance, parallel, and distributed solutions.
* Perform code and solution review activities, then recommend enhancements that improve efficiencies, performance, stability, and lower support costs.
* Configure and conduct tuning exercises on Hadoop environments.
* Quickly understand and apply new technologies and solution approaches.
* Apply the latest DevOps and Agile methodologies to improve delivery time
* Document requirements and configurations, as well as, clarify ambiguous specs


Qualifications:
* Bachelor degree in Computer Science, Mathematics, or Engineering
* Experience in AWS is a must have
* 4-7 years enterprise Big Data Engineering experience within any Hadoop environment
* Experience in Python, R, SQL, Java, Scala
* 5+ years enterprise software engineering experience with object-oriented design, coding and testing patterns, as well as, experience in engineering (commercial or open source) software platforms and large-scale data infrastructures
* Professional Hadoop training preferred




If you are interested in this Data Engineer job in Greenville, SC, please apply via the apply now link provided. Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.
 
Job Number: 303475
Job Location: Greer, SC
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/31/2020
Last Updated: 08/11/2020
Firm Name: BELCAN TECHSERVICES
Attention: AlexisKruzel
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/489-4300
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
Seeking an experienced electrical engineer to take ownership of several key components. This role requires the candidate to thrive in a high paced environment and will have an integral role in advancing the next generation of electrically powered vertical lift aircraft.
Roles and Responsibilities:
Define: Generate conceptual layouts for critical systems. This includes high voltage systems to drive BLDC motors and low voltage systems to control key elements of the avionic and vehicle management systems. It is desired for the candidate to specifically take ownership of analog & digital circuits (MOSFETs, op-amps, switching regulators, gate drivers, microcontrollers, SPI, I2C, etc) for high power BLDC drive motors as other systems such as electro-mechanical actors. The candidate will participate in initial equipment conceptual development and carefully balance product specifications, process requirements, and lead-time limits. The engineer will define key requirements and take ownership of them through the design life-cycle.
Do: The Electrical Design Engineer will also take the lead designing a myriad of critical components that are the basis for the Butterfly Aircraft’s electrical propulsion systems. Areas of focus include BLDC motor drivers and the associated electrical components. The end application will require extreme levels of reliability and fault tolerance and therefore the systems and components designed by the electrical engineer will need to adhere to aerospace best-practices for flight critical vehicle management systems. Familiarity with DO254 and DO178 is desired. The ideal candidate will have a hand in developing new systems from the ideation stage and seeing them through to a flight-worthy component. Thus, the role will require experience designing, prototyping, and testing multiple iterations of the development PCBs and be competent in the skills and tools needed to undertake this effort.
Key Responsibilities:
• Start-to-finish hardware ownership: Specification, architecture, design, simulation, schematic, layout supervision, prototype, validation, and manufacturing of circuit boards. Thoroughly document design requirements, calculations, power budgets, validation results, etc. Rapidly iterate as design requirements and system features mature.
• Circuit board design: Develop the specification, architecture, and design of electronic circuits for motor control including consideration of processor requirements and integration, system timing and bus loading. Work hand in hand with the embedded systems lead and software counterparts to ensure success of the integrated system. Design hardware, source components, develop schematics, manage layout, and test prototypes to validate hardware.
• Testing and validation: Identify core test requirements and balance test time with test coverage. Interact with various design, manufacturing, and firmware teams throughout the project. Establish clear, concise hardware test plans, and identify necessary test sequences and functional verification testing.
Secondary Responsibilities:
• Establish great working relationships with team members and cross functional teams.
• Create electrical panel schematics and work closely with builders to checkout wiring and quickly correct mistakes.
Intrinsic: The role will require constant flexibility and a level of comfort working in a rapid-prototype environment. The projects and assignments will vary from week to week, so the candidate should ideally have robust experiences to draw from (e.g. Aerospace, Electric Vehicle development, Motorsport/Formula One) in order to operate effectively in this environment. The role will include interfacing with engineering management, our customers, certification authorities, operations, procurement, external suppliers, and fellow engineers.
Required Qualifications:
• Master’s degree from an accredited university in Electrical Engineering or a related discipline with at least 5 years of professional experience in aerospace or a related field (i.e. electric vehicle development); or equivalent experience/combined education.
• Excellent circuit board design skills and an analytical mindset with a track record of demonstrated success developing actual products in a development environment.
• Experience in PCB schematic creation.
• Experience in electrical equipment selection and hardware integration/abstraction.
• Experience in electrical panel design and layout.
• Competent in electrical fundamentals.
• Familiarity with C, C++, Python, and/or Labview
• Well versed in the fundamentals of serial communication protocols (CAN, LIN, Ethernet, Bluetooth, DP, etc.)
• Experience with designing and testing to meet DO-160 Environmental Qualification requirements is desired.
• Experience with HW design that meets certification requirements for lightning strike and HIRF is advantageous.
• Experience overseeing and/or preparing electrical system compliance test plans and reports in support of aircraft certification, along with direct experience working with the FAA and/or FAA DERs, or past experience as an FAA electrical systems DER would be highly desirable.



The Structures Company is an AA/EOE.
 
Job Number: 399
Job Location: Southern, CA
Rate: $55-$70/Hr., **DOE**
Per Diem: Yes
Duration: 12 Months
Start Date: ASAP
Input Date: 06/23/2020
Last Updated: 08/13/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Electrical Engineer

Job ID # 2020-11554

Contract Opportunity

Location: Denver, CO

Industry: Aerospace & Defense

Minimum Education: Bachelor’s Degree

Minimum Experience: 6 Years

 

What You’ll Do:

Perform system and subsystem integration ensuring that subsystems function together as an integrated system.
Bring together discrete systems utilizing a variety of methods including systems engineering, technical risk assessments, technical planning, verification and validation, and supportability and effectiveness analyses of total systems throughout the system lifecycle.
Analyze are performed at all levels of total system product to include: concept, design, fabrication, test, installation, certification, operation, maintenance, and disposal.
Perform functional analysis, timeline analysis, detailed trade studies, requirements allocation, and interface definition studies to translate customer requirements into hardware and software specifications.
May lead cross-functional teams and play a critical role in process and tool development, execution, and continuous improvement
 

What You’ll Need:

Mandatory experience:
Experience with Word, Excel and PowerPoint to include the integration of charts for presentations
Flight Hardware and Software integration experience
Preferred experience:
Written and oral communication skills
Organization skills necessary to maintain focus and achieve consensus within the diverse multi-disciplined teams
Previous internship/work experience in an Aerospace company
Basic understanding of systems engineering principles
Basic understanding of launch vehicle systems
Experience developing, integrating, and verifying launch vehicle or space vehicle specifications and requirements
Experience with NASA programs and customer interfaces
Self-motivated with demonstrated initiative, teamwork and leadership skills on previous technical projects
Ability to operate independently and work as part of a team
 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

 

Education & Experience:

Bachelor’s Degree in Engineering, Applied Maths or Physics, combined with 6 + years of relevant work experience.
 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

 
 
Job Number: Job ID # 2020-11555
Job Location: Denver, CO
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 12 Months
Input Date: 07/28/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
An Electrical Engineer job in Englewood, Colorado is available with one of Belcan's top aerospace clients. In this job you will research, design, develop, test, certify, deploy and improve cutting edge products and services. These cover a very wide range from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. You'll conceptualize and design new products and processes throughout the product life-cycle from analog and digital electronic circuit card assemblies to fully integrated systems.

Requirements:
* Bachelor's degree in Electrical Engineering or related Engineering discipline and at least 6 years of relevant experience
* Experience with database based drawing software (Zuken E3, Capital Harness, etc.)
* Background in the Aerospace and Defense Industry
* Experience composing and analyzing Electrical Load Analysis (ELA), circuit modeling, simulation and analysis
* Knowledge of industry standard electrical design principles, to include, but not limited to model-based definition, electrical component selection, manufacturing and production processes
* Familiar with Electro Magnetic Effects (EME) to include, Electro Magnetic Compatibility (EMC) and Electro Magnetic Interference (EMI)
* Experience in digital or analog circuit design and schematic capture
* Demonstrated knowledge of engineering principles and practices
* Experience working in multi-disciplinary design & development teams
* Experience with Computer Aided Engineering tools
* The ability to obtain and maintain a U.S. Secret Security clearance is required


If you are interested in this Electrical Engineer job in Englewood, Colorado please apply via the 'apply now' link provided. Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

 
Job Number: 302933
Job Location: Englewood, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/18/2020
Last Updated: 08/27/2020
Firm Name: BELCAN TECHSERVICES
Attention: BrianVidetic
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/489-4300
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Test Engineer

Description:
****MUST be a U.S. Citizen****

Job Description:
1. Design, implement, and maintain test processes for Space Systems hardware using lean philosophies and techniques.
2. Take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing.
3. This can involve testing, data analysis, and interface with all aspects of the engineering department.
4. Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program.
5. Responsibilities also include daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met.

Typical Duties:
1. Support laboratory testing of Space hardware.
2. Develop and validate tooling concepts.
3. Author and maintain operation/test procedures.
4. Preparation of standardized operation/test sheets.
5. Defining test rig and facility requirements.
6. Participation on program Integrated Product Development teams.
7. Review drawings and concepts and resolve productivity concerns.

Required Experience:
1. Experience with advanced instrumentation and data acquisition systems is required.
2. Knowledge of LabVIEW desired.
3. Experience should also include five years working on the testing of complex electrical systems, testing and troubleshooting of complex FPGA (Fully Programmable Gate Array), digital and analog based electronic controllers, testing of components such as HED (Hall Effect Device) based pumps and brushless DC motors.
4. Applicant must have the capability of working independently and be self-motivated.
5. Excellent communication skills, written and verbal are required.
6. Ability to proficiently operate common Microsoft Office software products is required.

Education:
1. Bachelor’s degree required
 
Job Number: 12256
Job Location: Windsor Locks, CT
Rate: $67.00/HR
Per Diem: No
Overtime: Possible
Duration: 12 mos
Start Date: ASAP
Input Date: 07/28/2020
Last Updated: 08/24/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Test Engineer

Description:
Job Description:
1. Design, implement, and maintain test processes for Space Systems hardware using lean philosophies and techniques.
2. Take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing.
3. This can involve testing, data analysis, and interface with all aspects of the engineering department.
4. Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program.
5. Responsibilities also include daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met.

Typical Duties:
1. Support laboratory testing of Space hardware.
2. Develop and validate tooling concepts.
3. Author and maintain operation/test procedures.
4. Preparation of standardized operation/test sheets.
5. Defining test rig and facility requirements.
6. Participation on program Integrated Product Development teams.
7. Review drawings and concepts and resolve productivity concerns.

Required Experience:
1. Experience with advanced instrumentation and data acquisition systems is required.
2. Knowledge of LabVIEW desired.
3. Experience should also include five years working on the testing of complex electrical systems, testing and troubleshooting of complex FPGA (Fully Programmable Gate Array), digital and analog based electronic controllers, testing of components such as HED (Hall Effect Device) based pumps and brushless DC motors.
4. Applicant must have the capability of working independently and be self-motivated.
5. Excellent communication skills, written and verbal are required.
6. Ability to proficiently operate common Microsoft Office software products is required.

Education:
1. Bachelor’s degree required
 
Job Number: 12457
Job Location: Windsor Locks, CT
Rate: $67.00/HR
Per Diem: No
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 07/17/2020
Last Updated: 08/24/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Electrical Test Engineer

Description:
 PDS Tech, Inc. is seeking an Electrical Test Engineer, in Windsor Locks, CT.

Summary:

  • Take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing.
  • This can involve testing, data analysis, and interface with all aspects of the engineering department.
  • Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program. 
  • Responsibilities also include daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met.
  • Typical Duties: Support laboratory testing of Space hardware,
  • Develop and validate tooling concepts, 
  • Author and maintain operation/test procedures,
  • Preparation of standardized operation/test sheets, 
  • Defining test rig and facility requirements,
  • Participation on program Integrated Product Development teams, 
  • Review drawings and concepts, and resolve testability concerns.

​​​​​​​
Prerequisites:
  • Experience with advanced instrumentation and data acquisition systems is required.  
  • Knowledge of LabVIEW desired.
  • Experience should include working on the testing of electrical systems and components such as motor controllers, actuator controls, & system controllers.
  • Capability of working independently and is self-motivated.
  • Excellent communication skills, written and verbal are required.
  • Ability to proficiently operate common Microsoft Office software products is required.


  • Bachelors

 
Job Number: 2010115312
Job Location: Windsor Locks, CT
Duration: 12 months
Input Date: 06/01/2020
Last Updated: 09/23/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Roger Greco
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003Ou6qQAC&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Test Engineer - Contract OHIO

Description:
Analysis
Conduct failure analysis with minimal oversight Perform analysis of products to show compliance to derating guidelines and manufacturers'
specifications. Various CAD/CAE tools may be used for this.

Computer Skills
Basic proficiency with Microsoft Office (Word, Outlook, Excel, PowerPoint) Operate computer-assisted engineering and design software and equipment to perform basic engineering tasks.
Design

Investigate and test vendors' components, perform design selection Modify existing designs for new applications Create documentation of design / product with minimal oversight – drawings, specifications, compliance matrices, test plans and test reports
 
Job Number: 12680
Job Location: Cincinnati, OH
Rate: 40/45 hr.
Per Diem: Split
Overtime: Possible
Duration: 12 Months
Start Date: 2/3 wks from offer
Input Date: 05/14/2020
Last Updated: 07/30/2020
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded C, Software Engineer- California

Description:
Embedded Software Engineer
• must have good written skills as they will be helping with requirements and design documentation
• Must have 10+ years embedded experience (staff level)
• GPS/Radar knowledge highly desired.
• Must have worked in the defense industry and be familiar with typical documentation and milestone reviews

Secret clearance highly desired (desired but not mandatory).

Software engineer to work on prototype code
• Must know Embedded C
• Must have experience with embedded software
• Must have good written skills as they will be helping with doing requirements and design documentation
• 10+ years embedded experience
• Ability to hold secret clearance
• US citizenship required.
 
Job Number: 92801
Job Location: CA
Rate: 85/100 hr-W2
Per Diem: yes
Overtime: Possible
Duration: 12 Months plus
Start Date: End of May
Input Date: 05/05/2020
Last Updated: 07/30/2020
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic Avellino
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

Embedded Software Engineer

Description:
Chipton-Ross is seeking an Embedded Software Engineer for an opening in Camden, NJ.

RESPONSIBILITIES:
Reporting to the Software Engineering Manager, the Embedded Cyber Software Engineer plays a key role in developing innovative software components.
Apply computer science, engineering, and mathematical analysis concepts and principles in the development of software for the target hardware
Work closely with cross functional members of the engineering organization to develop and evaluate interfaces between hardware and software, and operational performance requirements and design of the overall system
Support and participate in all phases of the software development life cycle, including requirements analysis, design, implementation, integration, and formal test
Develop software test plans and procedures, and other relevant technical documentation
Utilize modeling tools and equipment to establish operating data, conduct experimental tests, prototype, and evaluate results
Participate in peer reviews, identify, track and repair defects
Utilize a variety of software languages (i.e., C++, C, Java, Python, Assembly) on Windows, Linux, mobile platforms, and embedded real time operating systems (VxWorks, Linux, Integrity, and others for Motorola, Intel, TI, and custom processor designs)

REQUIRED EXPERIENCE:
Object-oriented design and implementation experience, with exposure to software modeling and UML
Experience developing device drivers and Board Support Packages for real time embedded systems
Experience with cryptography and cryptographic applications, security architecture, multi-level and cross domain security solutions, and certification requirements
Hardware / Software Integration experience
Experience debugging real time embedded applications
Experience with static analysis, code coverage tools, and automated test frameworks
Knowledge of network architectures and protocols
Related coursework or experience developing software for embedded applications
Excellent oral and written communication skills

EDUCATION:
Accredited Bachelor's or Master's degree in Computer Engineering, Electrical Engineering, Computer Science, or related field

WORK HOURS:
9/80, 1st Shift
Full-Time

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 185370
Job Location: Camden, NJ
Rate: $DOE
Duration: 8 Months
Input Date: 03/19/2020
Last Updated: 09/23/2020
Firm Name: CHIPTON ROSS
Attention: Max Cameron
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: mcameron@chiptonross.com
Website: www.chiptonross.com

Engineer I

Description:
Job description




Engineer I – Mission Systems Engineer (Systems Operability)



What You’ll Do



  • Detailed oriented systems engineering to understand the in-depth use of Ball spacecraft and the interdependences between spacecraft subsystems. 
  • Create and document the commands and telemetry for a spacecraft in a useful and easily understood manner throughout the life of the spacecraft development, integration and test, and mission operations.
  • Control and maintain the configuration of Ball Spacecraft via Flight Software Tables throughout the life of the spacecraft development, integration and test, and mission operations. 
  • Own and implement the command and telemetry system and tools for Spacecraft Integration and Test, as well as certain flight ground systems.
  • Maintain a regular and predictable work schedule.
  • Establish and maintain effective working relationships within the department, the Strategic Business Units, Strategic Support Units and the Company.  Interact appropriately with others in order to maintain a positive and productive work environment.
  • Perform other duties as necessary.


What You’ll Need



  • BS degree or higher in Engineering or a related technical field is required plus 2 or more years related experience.
  • Each higher-level degree, i.e., Master’s Degree or Ph.D., may substitute for two years of experience. Related technical experience may be considered in lieu of education. Degree must be from a university, college, or school which is accredited by an agency recognized by the US Secretary of Education, US Department of Education.
  • Current TS/SCI security clearance required.
  • Experience working in UNIX, Mac, and MS-Windows environments is preferred.
  • Good planning, organization, and communication skills.
  • Ability to work with large teams of distributed ground system engineers and senior level engineers of multiple disciplines.
  • Good interpersonal and leadership skills.
  • A willingness and ability to learn many of the technical skills through on-the-job training.
  • Ability to remain calm and collected in stressful situations.
  • Solid troubleshooting skills are required to provide anomaly resolution support during simulator development, integration and test of all spacecraft and payload components, and on orbit anomaly situations.


Working Conditions



  • Work is performed in an office, laboratory, production floor, or clean room, outdoors or remote research environment.
  • May occasionally work in production work centers where use of protective equipment and gear is required.
  • May access other facilities in various weather conditions.
  • Travel and local commute between Ball campuses and other possible non-Ball locations may be required. 


Successful candidate will have completed a government national security clearance investigation and must meet eligibility requirements for access to classified information. *U.S. Citizenship is Required.  By applying to this position you are agreeing to complete a National Security Clearance Pre-Screen Questionnaire, if one is required, to evaluate your general ability to obtain the required security clearance or government customer access associated with this position. 



US CITIZENSHIP REQUIRED




Job description




Engineer I – Mission Systems Engineer (Systems Operability)



What You’ll Do



  • Detailed oriented systems engineering to understand the in-depth use of Ball spacecraft and the interdependences between spacecraft subsystems. 
  • Create and document the commands and telemetry for a spacecraft in a useful and easily understood manner throughout the life of the spacecraft development, integration and test, and mission operations.
  • Control and maintain the configuration of Ball Spacecraft via Flight Software Tables throughout the life of the spacecraft development, integration and test, and mission operations. 
  • Own and implement the command and telemetry system and tools for Spacecraft Integration and Test, as well as certain flight ground systems.
  • Maintain a regular and predictable work schedule.
  • Establish and maintain effective working relationships within the department, the Strategic Business Units, Strategic Support Units and the Company.  Interact appropriately with others in order to maintain a positive and productive work environment.
  • Perform other duties as necessary.


What You’ll Need



  • BS degree or higher in Engineering or a related technical field is required plus 2 or more years related experience.
  • Each higher-level degree, i.e., Master’s Degree or Ph.D., may substitute for two years of experience. Related technical experience may be considered in lieu of education. Degree must be from a university, college, or school which is accredited by an agency recognized by the US Secretary of Education, US Department of Education.
  • Current TS/SCI security clearance required.
  • Experience working in UNIX, Mac, and MS-Windows environments is preferred.
  • Good planning, organization, and communication skills.
  • Ability to work with large teams of distributed ground system engineers and senior level engineers of multiple disciplines.
  • Good interpersonal and leadership skills.
  • A willingness and ability to learn many of the technical skills through on-the-job training.
  • Ability to remain calm and collected in stressful situations.
  • Solid troubleshooting skills are required to provide anomaly resolution support during simulator development, integration and test of all spacecraft and payload components, and on orbit anomaly situations.


Working Conditions



  • Work is performed in an office, laboratory, production floor, or clean room, outdoors or remote research environment.
  • May occasionally work in production work centers where use of protective equipment and gear is required.
  • May access other facilities in various weather conditions.
  • Travel and local commute between Ball campuses and other possible non-Ball locations may be required. 


Successful candidate will have completed a government national security clearance investigation and must meet eligibility requirements for access to classified information. *U.S. Citizenship is Required.  By applying to this position you are agreeing to complete a National Security Clearance Pre-Screen Questionnaire, if one is required, to evaluate your general ability to obtain the required security clearance or government customer access associated with this position. 



US CITIZENSHIP REQUIRED




 
Job Number: 2010115065
Job Location: Boulder, CO
Duration: 100 months
Input Date: 07/01/2020
Last Updated: 09/23/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Patrick Mahoney
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003OtGcQAK&URLSource=cjhunter

Engineer II

Description:
  • Detailed oriented systems engineering to understand the in-depth use of Ball spacecraft and the interdependences between spacecraft subsystems. 
  • Create and document the commands and telemetry for a spacecraft in a useful and easily understood manner throughout the life of the spacecraft development, integration and test, and mission operations.
  • Control and maintain the configuration of Ball Spacecraft via Flight Software Tables throughout the life of the spacecraft development, integration and test, and mission operations. 
  • Own and implement the command and telemetry system and tools for Spacecraft Integration and Test, as well as certain flight ground systems.
  • Maintain a regular and predictable work schedule.
  • Establish and maintain effective working relationships within the department, the Strategic Business Units, Strategic Support Units and the Company.  Interact appropriately with others in order to maintain a positive and productive work environment.
  • Perform other duties as necessary.

  • BS degree or higher in Engineering or a related technical field is required plus 5 or more years related experience.
  • Each higher-level degree, i.e., Master’s Degree or Ph.D., may substitute for two years of experience. Related technical experience may be considered in lieu of education. Degree must be from a university, college, or school which is accredited by an agency recognized by the US Secretary of Education, US Department of Education.
  • Current TS/SCI security clearance required.
  • Experience working in UNIX, Mac, and MS-Windows environments is preferred.
  • Good planning, organization, and communication skills.
  • Ability to work with large teams of distributed ground system engineers and senior level engineers of multiple disciplines.
  • Good interpersonal and leadership skills.
  • A willingness and ability to learn many of the technical skills through on-the-job training.
  • Ability to remain calm and collected in stressful situations.
  • Solid troubleshooting skills are required to provide anomaly resolution support during simulator development, integration and test of all spacecraft and payload components, and on orbit anomaly situations.


Working Conditions



  • Work is performed in an office, laboratory, production floor, or clean room, outdoors or remote research environment.
  • May occasionally work in production work centers where use of protective equipment and gear is required.
  • May access other facilities in various weather conditions.
  • Travel and local commute between Ball campuses and other possible non-Ball locations may be required. 

 
Job Number: 2010114980
Job Location: Boulder, CO
Duration: 48 months
Input Date: 06/03/2020
Last Updated: 09/23/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Patrick Mahoney
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003Ot4LQAS&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FPGA Design Electrical Engineer

Description:
n this position the engineer will design and develop complex electronic hardware systems for aircraft. A major focus of this mission critical engineering role will involve developing aircraft electronic systems. The engineer will be responsible for Circuit design, Field Programable Gate Array (FPGA) programing, and Printed Circuit Board (PCB) and Circuit Card Assembly (CCA) designs working on a cross functional team. Working on a cross functional team the engineer will be working with mechanical and software design teams to develop a complete qualified flight tested aircraft solutions.

The engineer will have an opportunity have an impact on the following areas: Requirements analysis/derivation, concept development, hardware architecture, component selection, schematic capture, reliability analysis (derating, thermal, signal integrity, power integrity, stability, overstress), design verification, system integration, and qualification.

Basic Qualifications:
- A BS Degree in Electrical Engineering or closely related technical field or equivalent experience/combined education
- Experience with circuit design concepts
- Experience in circuit analysis, troubleshooting, test instrumentation, and data analysis tools
- Experience with Printed Circuit Board (PCB) board design and Circuit Card Assembly (CCA) design
- Experience with VHDL, Verilog, or System Verilog languages to support FPGA firmware programing
- The technical ability to effectively define and interpret system level requirements and derive the requirements necessary to interface between lab and hardware
- The ability to work well in a teaming environment with other disciplines (Systems Engineering, Software Engineering, Mechanical Engineering, etc.)

Desired Skills:
- Experienced using Xilinx and/or Microsemi FPGAs
- Experienced with design and simulation tools (Xilinx Vivado, Microsemi Libero, Mentor QuestaSim)
- Experience with Perl, Visual Basic, and C/C++,
- DO 178C/254 verification
- High Speed and RF design
- Cadence schematic capture, PCB layout Allegro
 
Job Number: 132470
Job Location: Fort Worth, TX
Input Date: 07/30/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Valerie White
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Field Engineering Representative

Description:
Field Engineering Representative

Job ID # 2020-11545

Contract Opportunity

Location: Yuma, AZ

Industry: Aerospace & Defense

Clearance Requirement: Ability to Obtain Secret Clearance

Minimum Education: High School Diploma

Minimum Experience: 5 Years

 

What You’ll Do:

Interact with the customer and engineering to define, document, analyze, perform, and interpret test for the Abrams and Stryker Program products, systems, subsystems, components, engineering change orders, and modifications.
Testing includes Contractor, USG Developmental Test (DT), and Operational Testing (OT).
The FER must be familiar with Operator and Maintenance level tasks for tracked and wheeled platforms.
Perform direct platform level troubleshooting associated with software and hardware issues\failures to keep the vehicle available for testing, utilizing all available technical documentation (TM’s, IETMS, EBOM, BOM, C mod, ECO, GDV, Op Sheets, electrical, hydraulic, mechanical, and pneumatic drawings). 
Conduct real time direct phone calls to company Reliability, Safety, Systems, and Subsystems Engineering to resolve all issues associated with troubleshooting hardware and software related incidents, test failures, vehicle configuration, installation of modification & ECO hardware, and integration of hardware.
Provide daily progress reports via Daily Status reports, Engineering Logs, and Universal Incident
report (UIR).

Perform a variety of tasks to include extensive diagnostic troubleshooting of mechanical and electrical systems to include software functionality.
Guide/Direct mechanics, drivers, USG Test Directors, data collectors, soldiers, and additional crew members during scheduled and unscheduled maintenance activities.
Review USG/GDLS instrumentation plan package, and integration of equipment to ensure instrumentation does not introduce system or subsystems level faults/failures.
Responsible for all other duties assigned Test support includes but is not limited to the following USG Test Sites: APG, YPG, EPG, WSMR, RTC, CRTC, DPG.
What You’ll Need:

Familiar with Systems Engineering, Sub Systems Engineering, Reliability, Structures, Survivability, Program Office, Field Test, and integration concepts, practices, and procedures.
Familiar with electrical, hydraulic, pneumatic, software, and fire control systems.
Rely on extensive experience and technical judgment relating to operation and performance of Tracked Wheeled Military vehicles to plan and support aggressive test schedules.
Military experience preferred.
Write and submit technical daily vehicle Test Engineering Logs.
Write and submit Field Problem Reports/Universal Incident Reports (UIR) for Hardware/Software Issues/Failures.
Provide subject matter expertise support and training to fielding team and USG testers as required.
Perform Field Diagnostics of faults and initiate Root Cause Corrective Analysis/Failure Analysis.
Must have strong communication and interpersonal skills.
Must be able to troubleshoot systemic performance issues for automotive and weapons systems, and recommend viable solutions for the customer.
Must be technically competent using Microsoft Office Suite (Word, Excel, PPT) and other computer software programs such as Team Center, Vis Mockup, .
Must possess or be able to obtain a secret security clearance.
Must possess and maintain a valid driver’s license.
 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.



Education & Experience:

High School Diploma combined with 5 + years of relevant work experience; or Bachelor’s Degree.
 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

 
 
Job Number: Job ID # 2020-11545
Job Location: Yuma, AZ
Rate: Open
Per Diem: No
Overtime: Possible
Input Date: 07/23/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Flight Simulator Design Engineer 4

Description:
Chipton-Ross is seeking 3 Flight Simulator Design Engineer 4's for openings in Berkeley, MO.

RESPONSIBILITIES:
Seeking F-15 Training Systems Test Pilot SMEs to accomplish system design, integration, and test for the F-15 Mission Training Center (F-15 MTC). Responsibilities include:
- The successful candidate will work independently and will assist other members of the Test Team in the performance of day-to-day operations in a fast-paced testing environment.
- Team members create and execute Test Procedures to ensure the trainers correctly simulates aircraft performance and the operational environment.
- Team members will help develop system requirements, and perform all aspects of system testing on several types of pilot training systems.
- Off shift and weekend work may also be occasionally required to meet contractual milestones, objectives and delivery schedules
- This is a mid-level to senior grade position

Plans research and development programs for flight simulator requirements. Translates contract requirements into work requirements, processes and tasks. Manages customer and supplier relationships. Researches and responds to specialized technical questions from customers on flight simulator operations, service and regulatory concerns. Provides on-site customer assistance to support the introduction of new training equipment. Resolves specialized customer issues in the field. Leads and reviews analysis and evaluation of specialized engineering and supplier aircraft systems and performance data, operational documents and software for delivery to customer. Researches and analyzes customer and regulatory authority requirements to ensure they comply with industry standards. Leads and reviews client processes across organizations for defining the customer product, delivery and support. Develops new/revised processes in support of customer requirements and/or changes in company guidelines. Works under minimal direction.

ADDITIONAL EXPERIENCE:
-Experience flying F-15 and/or other fighter aircraft within the last five years
- Experience in an aircraft test environment
- Experience flying F-15 and/or other fighter aircraft

EDUCATION:
Accredited education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

TRAVEL: YES
Ability to travel domestically and internationally.25% international travel to Okinawa Japan and UK. Travel duration will be less that 29 days.

FULL TIME/FIRST SHIFT
WORK HOURS: 7:00 AM - 4:00 PM
Ability to work flexible hours, overtime and occasional weekends when necessary.

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 184160
Job Location: Berkeley, MO
Rate: $DOE
Duration: 6 Months
Input Date: 01/17/2020
Last Updated: 09/23/2020
Firm Name: CHIPTON ROSS
Attention: Kevin Suk
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: ksuk@chiptonross.com
Website: www.chiptonross.com

GNC and Software Engineer

Description:
Candidates filling this position will have strong skills in advanced mathematics and computer programming. The ideal candidate possesses the following skills:
  • Trajectory analysis
  • Guidance algorithms
  • Control laws
  • Kalman filters
  • Sensor fusion
  • Flight simulators
  • Machine learning
  • Optimization
  • Geodesy
  • Orbital mechanics
  • C, C++, Python, MATLAB
  • Navigation sensors (GPS, star trackers, LIDAR, IMU, etc.)
  • Systems engineering
  • Leadership and management


 
Job Number: 2010115012
Job Location: Mojave, CA
Duration: 36 months
Input Date: 06/03/2020
Last Updated: 09/23/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003Ot75QAC&URLSource=cjhunter

HighJump Developer/ Analyst, Nashville, TN 37214

Description:
PDS Tech is seeking a HighJump Developer/Analyst in Nashville 37214, TN for a 12-month contract. Contact Elisabeth Laspe for details. 314-669-8020 elaspe@pdstech.com
7 month contract with possible  extensions. 


POSITION SUMMARY: 
 5+ years experience

HighJump Developer/Seniors Analyst skills required to support Complex Troubleshooting, New Feature Requests and Project Work.

Candidate must have the following experience or knowledge.
Software
o Experience with HighJump's Development toolset (create Stored Procedures, SQL queries
o Develop HighJump Solutions in Warehouse Advantage, Yard Advantage, and Labor Advantage.
o MS SQL Server Management Studio
o SQL Server 2016 or newer development experience with exposure to enterprise level SQL Server environments (update Windows Task Scheduler,).
o Zebra Printer Setup Utilities
o Use of xml, flat files (FTP/SFTP), message queues, table to table communication


Below is nice to have and not mandatory:
o Troubleshoot and develop HighJump functionally using the of following peripherals/devices:
o Telnet Serverso Avalanche (Mobile Device Management Tool)

o Printers/Scanners o Handheld Devices
o App Servers, Web Servers, Print Servers
 

 
Job Number: 2010113638
Job Location: Nashville, TN
Per Diem: No
Duration: 7 months
Input Date: 04/16/2020
Last Updated: 09/23/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Elisabeth Laspe
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: cecjdallasav@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003OnEvQAK&URLSource=cjhunter

Hybris Programmer Analyst 4

Description:
PDS Tech, Inc. is seeking a Hybris Programmer Analyst in Plano, TX. For more information, please contat Peter Pham at ppham@pdstech.com or 316-854-3040.

Summary:

  • Leads and performs the design, program, test, implementation and documentation of highly-complex computing applications and software system architectures or computing architecture and computing application system designs.
  • Initiates and leads the analysis of end user processes to define application requirements.
  • Writes and compiles highly-complex code and constructs based on documented design or designs application architecture that integrates application software and delivery subsystems for specific applications.
  • Provides support on highly-complex end user issues or complex application architecture.
  • Leads the development of training for use of applications and identification of improvements to system architecture.
  • Leads and performs analysis of information to determine architecture specifications, parameters for software compatibility, application security needs and other application architecture requirements.


 
Prerequisites:
  • Education/experience typically acquired through advanced technical education (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience, 13 years' related work experience, etc.).
  • Need to be experienced candidates in SAP Hybris, Azure Cloud, eComm solutions, Java, Spring, JavaScript, CSS, HTML and API integrations.

 
Job Number: 2010111259
Job Location: Plano, TX
Duration: 6 months
Input Date: 01/24/2020
Last Updated: 09/23/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Peter Pham
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fh7WQAQ&URLSource=cjhunter

IT Generalist - Systems and Network Administrator

Description:
The systems and network administrator is responsible for managing the IT infrastructure including AWS/cloud servers, on-premise servers, workstations, laptops, and network gear. Day-to-day responsibilities include backups, reviewing logs, setting up and disabling user accounts, managing the firewall(s), managing software licenses, working with service providers, and troubleshooting IT issues. The administrator will specify and set up servers, desktops/laptops, network equipment, phones, and physical access control systems. The administrator will assist the Avionics, GNC, and Flight Software teams with RTOS deployment and test and flight system setup and management. The administrator will assist the mission operations center lead in specifying and setting up the mission operations center. The administrator will work with the CTO to modify and implement IT policies. The administrator will work with the CTO, NASA, and DoD to manage and implement Security Policy.
Required Skills/Experience:
  • Mission-critical IT systems (such as datacenter, telco, call center, business website, etc.)
  • Linux, Windows 10, Windows Server products
  • Python, Powershell, shell scripting (bourne/bash or csh)
  • Firewall rules, TCP/IP, WiFi, Ethernet, Routing

Desired Skills/Experience:

  • Google apps administration
  • Real time OS (VxWorks, RTEMS, etc.)
  • C/C++, Matlab
  • CAD/CAM/CAE support
  • PDM/PLM support
  • GitLab support
  • FortiNet FortiGate firewall
  • Managed switches/multi-layer switches
  • HPC
  • NAS
  • SAN
  • NIST Cybersecurity Framework, NIST SP800-171

Required skills/personal traits:

  • Critical thinking
  • Troubleshooting
  • Self managed, self starter

Self learner

 
Job Number: 2010115016
Job Location: Mojave, CA
Duration: 36 months
Input Date: 07/01/2020
Last Updated: 09/23/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003Ot7PQAS&URLSource=cjhunter

Instructional Designer

Description:
PDS Tech, Inc. is seeking an Instructional Designer in Atlanta, GA.

Job Description:

  • The Instructional Designer (ID) is responsible for working with Project Managers (PM) to successfully develop training programs for the client's customer service representatives globally across all business units.
  • Standard ISD processes, such as the ADDIE learning model, are used to design and develop custom business process and systems training programs including instructor-led and e-learning courses.
  • The ID is responsible for working with Subject Matter Experts (SME) and Information Mapping tools to assess information, determine impacts and identify skills gaps.
  • The ID is also responsible for learning and testing proprietary systems and software to identify training needs, determine scope and create interactive learning tools.




For Additional Information on this Opening Please Contact Heidi Smith: 
Direct Number: 843-460-4474


Email Your Updated Resume to hsmith@pdstech.com



Qualifications:
  • 4-6 yrs experience required.
  • US Citizenship required.

 
Job Number: 2010110655
Job Location: Atlanta, GA
Duration: 12 months
Input Date: 02/12/2020
Last Updated: 09/23/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Lynn Byers
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002feh2QAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Jr Network Engineer (Wireless)

Description:
Contract to Perm Position

USPS Postal Clearance Required Must be a US Citizen or Permanent Resident (Green Card Holder)

We are seeking a Jr Network Wireless Engineer who is adept with wireless technologies, such as Wi-Fi, WiMAX, and WAP to join our team of qualified, diverse individuals. This position will be located in Raleigh, NC. This is an on-site position with no telecommute possibilities. This position is part of the Northrop Grumman's ETS Contract with the United States Postal Service, bringing top of the line professional technologists to their teams.

Roles and Responsibilities include, but not limited to:

• Support a Cisco centric WAN, LAN, and WLAN environment. This includes routers, firewalls, security, WLAN.
• Conducting wireless site surveys and wireless assessments
• Conduct predictive wireless assessments and deployments
• Perform installation, maintenance and upgrade of wireless controllers and access points.
• Implement and support a secure wireless network for an enterprise-wide wired and wireless infrastructure.
• Central focus is in supporting the wireless infrastructure and associated wireless technology projects.
• Paired with another junior engineer, manage 3-4 large simultaneous wireless refresh projects per quarter to completion
• Monitor system for trouble areas and proactively resolve and document root cause.
• Performing site installs, maintenance, upgrades or software enhancements to support the network infrastructure needs.
• Function as a point of escalation for operational entities regarding regular or complex issues.
• Work on daily service tickets while engaged on enterprise wireless deployments.
• Own and fulfill small to large strategic or tactical wireless projects.
• Engage with manufacturer technical support centers to quickly resolve issues as they arise as necessary.
• Design, test and implement new Wi-Fi deployments and upgrades to existing infrastructure
• Willing to travel up to 25% for occasional short term assignments.

Additional Job Details:

Basic Qualifications:


• Bachelor’s Degree in Computer Science or an associated discipline and a minimum of 3 years’ experience. Additional experience may be considered in lieu of Degree.
• Minimum 3 years of applicable networking experience. • Must have a thorough knowledge of 802.11n and 802.11a
• Strong experience with both centralized and local Cisco Wireless LAN Controllers.
• Strong experience with Cisco Lightweight Access Points.
• Strong understanding of WLAN technologies, network management, 802.11 b/g/n/ac standards.
• Strong troubleshooting skills and experience with analysis tools such as Ekahau, Air Magnet, Wireshark, etc.
• Experience or understanding of scripting languages, such as Bash, Perl or Python
• Past experience working with customers remotely and over the phone to assist with network troubleshooting and ability to escalate issues as needed.
• Experience with Microsoft Office products including Word, PowerPoint and Visio.
• Ability to change physical locations based upon need (walking in and between buildings outside)
• Willing to work occasional on-call and after hours support rotation
• Willing to travel up to 25% for occasional short term assignments.
• Must be able to obtain a Position of Public Trust Clearance – US Citizen or Permanent Resident (Green Card Holder), and must not have traveled outside the US for a combined total of 6 months or more in last 5 years.
• Must have resided in the US for the last 5 years Preferred Qualifications:
• Cisco CCNA and CCIE certification
• 5+ years of Enterprises WAN/LAN/WLAN experience and high density deployments.
• 3+ years of Cisco devices configuration experience.
Local to the Raleigh, NC area (this position does not provide relocation assistance)

• Active USPS security clearance
 
Job Number: x20200029
Job Location: Raleigh, NC
Rate: $38.29
Duration: 3 - 6 months
Input Date: 01/30/2020
Last Updated: 08/03/2020
Firm Name: XPEERANT
Attention: Woody Arnold
Address: 4308 N GARFIELD AVE
City, State: LOVELAND, CO 80538
Phone: 970/282-9287
Website: www.xpeerant.com

Jr. Mechanical Engineer

Description:
Interprets customer specifications to define requirements for mechanical designs.
• Applies the Autodesk Inventor 3D CAD system to create mechanical layouts and drawings.
• Designs mechanical and electromechanical assemblies using design for manufacturing (DFM), design for assembly (DFA) principles.
• Develops detailed fabrication and assembly drawings, performs tolerances analysis, design studies and trade studies.
• Specifies mechanical components, standards and mechanical best practices.
• Troubleshoots and resolves mechanical manufacturing and assembly failures.
• Support testing, installation, operation, maintenance and repair of electromechanical equipment.
• Generates project cost estimates and maintains project budgets and schedule.
• Performs thermal and structural analyses and generates analysis reports.
• Generates engineering design change orders and reviews the work of peers.


• In persuit of a Bachelor of Science degree in Mechanical Engineering or Mechanical Engineering Technology.
• 0-3 years experience in mechanical engineering design of electromechanical equipment and systems.
• Practical experience with computer aided design and analysis software tools.
• Good communication skills
• Completed statics/dynamics, vibration and fluid dynamics course work.
 
Job Number: B4110
Job Location: Northwest, MA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6+ months
Start Date: ASAP
Input Date: 09/09/2020
Last Updated: 09/23/2020
Firm Name: ADVANCED TECHNOLOGY
Attention: Brittany
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: brao@advancedtechno.com
Website: www.advancedtechno.com

Machine Programmer-Brake Press/Laser

Description:
Write programs or nesting for various fabrication machines including Brake Press, Laser, etc. Inform appropriate personnel of mistakes on or clarifications required on drawings or routing changes for process improvements.
 Essential Job Functions:
·Create programs and nesting daily for miscellaneous fabricating machines by material type per the MRP schedule.
·Ability to make process and productivity improvements while performing duties.
·Ensure downstream operations have required parts when required.
·Needs to have an understanding of basic laser and operation and brake press operation.
·Ability to read and interpret blueprints and weld symbols.
·Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.
·Ability to add, subtract, multiply, and divide in all unites of measure, using whole number, common fractions, and decimals and ability to compute rate, ratio, and percent.
·Ability to understanding to carry out instructions furnished in written, oral or diagram form.
·Ability to deal with problems involving several concrete variables in standardized situations.
·Review job order, CAD drawings, or specs, understand tool paths, and analyze data for calculations/critical paths.
 
Previous experience working with or programming brake press and laser.
Knowledge of database software; inventory software; manufacturing software; and spreadsheet software.
Use of the AS400 computer system
Use of Auto CAD or Solidworks.
1st shift position

 
Job Number: 2010113589
Job Location: Clintonville, WI
Duration: 6 months
Input Date: 04/14/2020
Last Updated: 09/23/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Tyler Belisle
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003On27QAC&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Optics Technician

Description:
Manufacturing Optics Technician

Job ID # 2020-11536

Contract Opportunity

Location: Cullman Alabama

Industry: Aerospace & Defense

Minimum Education: Associate’s Degree

Minimum Experience: 3 years

 

What You’ll Do:

Study routings, drawings, manuals, specifications or sample parts to determine sequence of operations and setup requirements
Devise inspection methods to inspect and check components according to customer specifications and requirements or uses established standard methods
Determine allowable variations. Establishes critical values for surface finishes, wavefront error and interference fits at ambient and operating temperatures
Use precision measuring equipment to determine wavefront error
Inspect surfaces to establish values of roughness, scratch/dig and wavefront error. Makes determination as to disposition for appropriate corrective action
Assemble components and verifies dimensional values. Disassemble and recheck as required
Lap and polish of various types of metals and glass using an interferometer to determine figure of work piece
Create and maintains lap and polishing tooling as required for figuring of the optic
Gold plating of optical elements to meet spectral requirements per customer specifications
Maintain traceability of material by keeping lot items together or serialized
Verify, by initials or approved stamp, conformance of work piece to process specifications
Maintain equipment and immediate work area in a clean and orderly condition
Efficient at interpreting three-dimensional drawings (i.e. CAD models)
Promote continuous product improvement by conceptualizing and implementing new procedures, processes or fixtures
What You’ll Need:

Knowledge Skills and Abilities:
Consistently displays high performance attributes
Influential with others and demonstrates superior communication and collaborative skills consistent with expectations for position
Shows strong initiative in job assignment
Strong knowledge of generally accepted technical theory
Strong knowledge and proficiency in the use of fabrication, inspection and test tools and equipment
Strong ability to fabricate complex hardware
Strong ability to use computers and software applications to assist in job execution
Strong understanding of practical applications of material properties
Strong ability to generate documents, spreadsheet data analysis and block diagram creation utilizing computer aided tools
Strong proficiency in application and interpretation of complex specifications, requirements, standards and practices
Demonstrates leadership and initiative in actions
Solid knowledge of application and interpretation of complex specifications, requirements, standards and practices
Demonstrates leadership and initiative in actions
Creative thinking with the ability to multi-task
Commitment to ongoing professional development
Team player who thrives in collaborative environments and revels in team success
 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.



Education & Experience:

Associate’s Degree combined with 3 + years of relevant work experience.
 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/
 
Job Number: Job ID # 2020-11536
Job Location: Cullman, AL
Rate: Open
Per Diem: No
Overtime: Possible
Input Date: 07/21/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Many New Long Term Aerospace Programs in Missouri

Description:
Stress Engineers: either metallics or composites (secret and non-secret)

Structural Designers: must be degreed and have UG NX experience

Electrical Design Engineers: must be degreed and have UG NX experience

Liaison/MRB Engineers: military or commercial background, MRB authority, degree from ABET accredited university

Tool Designers: UG NX background, aerospace or aircraft background

Aircraft Systems Engineers: systems engineers with avionics or software; DOORS or Rhapsody experience needed

Software Engineers: Ada, C++; avionics experience a plus

System Design Engineers: ECS, hydraulics and pneumatics, landing gear, UG NX experience

PDS Tech - #1 Aerospace supplier in Missouri
 
Job Location: Missouri
Input Date: 02/12/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy or Ken Brownsher
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Email: mmccarthy@pdstech.com; kbrownsher@pdstech.com
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Designer - PTC Creo 4.0

Description:
Experience in advanced assembly techniques in Creo Parametric including skeleton driven top-down design, simplified reps and other large assembly management techniques.

• Experience in Pro/INTRALINK 11.0 or higher. Recent experience in Winchill or similar PDM/PLM software may be considered

Knowledge of applying and interpreting Geometric Dimensioning and Tolerancing (GD&T) to drawings.

• Creates layouts and drawings of complex assemblies and details parts of devices, mechanisms, and structures.
• Investigates pertinent design factors such as ease of manufacture, availability of materials and equipment, interchangeability, strength-weight efficiency, and contractual specification requirements and cost.
• Checks completed layouts and drawings for clarity, completeness, conformity to standards, procedures, specifications, and accuracy of calculations and dimensioning.
• Identifies design errors, omissions, and other deficiencies, and recommends revisions and/or improvements in design layout to fellow responsible engineers or designers.
• Supports development of technical solutions to complex problems which require regular use of ingenuity and creativity.
• Applies current technology and aids in the development of new technologies.
 
Job Number: 3197
Job Location: Laurel, MD
Per Diem: YES
Overtime: Possible
Duration: 6-12 Months
Start Date: 2/3 wks from offer
Input Date: 07/28/2020
Last Updated: 08/28/2020
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Designer

Description:
Understanding and interpreting engineering models and drawings in aircraft subsystems such as Environmental Control Systems, Fuel Systems, Hydraulics Systems, and etc. Demonstrated ability to utilize 3D modeling software is a plus.

HOURS: 9/80 workweek.

Requirements: High School Diploma/GED required plus 6 years of relevant experience. Preferred Qualifications: Experience with NX and TeamCenter.

***Must be able to view classied material
 
Job Number: 185533
Job Location: Melbourne, FL
Rate: $40-42/hr
Per Diem: split
Overtime: not specified
Start Date: ASAP
Input Date: 07/20/2020
Firm Name: CHIPTON ROSS
Attention: Terry Jones
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Test Engineer

Description:
Job Description:
1. Design, implement, and maintain test processes for Space Systems hardware using lean philosophies and techniques.
2. Take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing.
3. This can involve testing, data analysis, and interface with all aspects of the engineering department.
4. Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program.
5. Responsibilities also include daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met.

Typical Duties:
1. Support laboratory testing of Space Station hardware.
2. Develop and validate tooling concepts.
3. Author and maintain operation/test procedures.
4. Preparation of standardized operation/test sheets.
5. Defining test rig and facility requirements.
6. Participation on program Integrated Product Development teams.
7. Review drawings and concepts and resolve producibility concerns.
8. Experience with advanced instrumentation and data acquisition systems is required.
9. Knowledge of LabVIEW desired.
10. Experience should also include five years working on the testing of complex mechanical systems, testing of complex mechanical systems, testing of components such as, heat exchangers, pumps, fans, & accumulators.
11. Applicant must have the capability of working independently and be self-motivated.
12. Excellent communication skills, written and verbal are required.
13. Ability to proficiently operate common Microsoft Office software products is required.

Education:
1. Bachelor’s degree required.
 
Job Number: 12454
Job Location: Windsor Locks, CT
Rate: $67.00/HR
Per Diem: No
Overtime: Possible
Duration: 12 Mos
Start Date: ASAP
Input Date: 07/22/2020
Last Updated: 08/24/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Mechanical Test Engineer

Description:
PDS Tech is seeking a Mechanical Test Engineer in Windsor Locks, CT
 
The ideal candidate will Design, Implement, and Maintain Test Processes for Space Systems hardware using lean philosophies and techniques.
 
They will take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing.
 
This can involve testing, data analysis, and interfacing with all aspects of the engineering department.
 
Duties / Responsibilities include:
  • Interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program.
  • Daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met.
  • Supporting laboratory testing of Space Station hardware,
  • Developing and validating tooling concepts,
  • Authoring and maintaining operation/test procedures,
  • Preparing standardized operation/test sheets,
  • Defining Test Rig and Facility requirements,
  • Participating in Program Integrated Product Development teams,
  • Reviewing drawings and concepts, and
  • Resolving Producibility concerns.


 
Requirements:
  • Experience with advanced instrumentation and data acquisition systems
  • A minimum of five (5) years working on the testing of complex mechanical systems and components such as, heat exchangers, pumps, fans, & accumulators.
  • Capability of working independently and be self-motivated.
  • Excellent communication skills, written and verbal
  • Ability to proficiently operate common Microsoft Office software products

Desired Skills:

  • Knowledge of LabVIEW


  • Will accept someone with 2+ years experience up to and including 25+ years experience.

Education:

  • Bachelors

 
Job Number: 2010112064
Job Location: Windsor Locks, CT
Duration: 12 months
Input Date: 02/17/2020
Last Updated: 09/23/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Roger Greco
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fl9JQAQ&URLSource=cjhunter

Microsoft Office 365/SharePoint Support Analyst

Description:
Purpose and Scope: 

Under direct supervision, formulate and define systems scope and objectives through user needs and an understanding of business systems and industry requirements.

Essential Responsibilities:
  1. Respond to user support requests regarding the following topics: creating and customizing SharePoint site collections, sites, lists or libraries, forms, workflows, metadata, user access and experience. Design, develop and provide training for customized solutions. Will work closely with business operations to ensure solutions answer their needs and solve their problems. Prioritize and maintain commitments and delivery dates for multiple projects and customers, simultaneously. Development and maintenance of technical design artifacts and requirements documentation.
    Communication with clients as required: keeping them informed of project progress, impending changes, and agreed upon outages. Interpret and discuss information with others and regularly provide advice and recommend actions involving complex issues. Demonstrate professional attitude with client over the phone, on-site and through emails to resolve all client requests/questions.
    US Citizenship Required.
    Must be able to work independently, strong remote worker skills. Occasional travel may be required. 
    Desired Knowledge/Skills:
  2. SharePoint 2016+, specifically custom site configuration and user support
  3. SharePoint site customization, design and delivery
  4. SharePoint Forms and Workflow; InfoPath and SharePoint Designer
  5. Troubleshooting and Issue Analysis
  6. Customer Service Focus
  7. Clear and effective communicator, verbal and written
  8. Ability to work independently and a strong desire for personal and professional development
  9. Ability to identify and evaluate trends in industry best practice policies

  • Bachelor’s degree in Computer Science or related field or equivalent.
  • Excellent communications and analytical skills
  • Demonstrated working knowledge and extensive experience in SharePoint and related software, such as InfoPath and SharePoint Designer
  • Position may require the ability to investigate, troubleshoot, and design solutions to problems in operational hardware and software.
  • Position may require travel.

Position may require the ability to pass and maintain a Security Clearance.
 
Job Number: 1910107369
Job Location: San Antonio, TX
Duration: 6 months
Input Date: 01/13/2020
Last Updated: 09/23/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Satish Gadasu
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: cecjdallasav@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fMf1QAE&URLSource=cjhunter

Model Based Systems Engineering

Description:
PDS Tech Inc is seeking a Model Based Systems Engineer in Annapolis, MD

***Must be US Citizen***

***Active Secret Clearance required***

MBSE provides an approach and process to model the necessary system engineering products needed to align a system through its programmatic lifecycle by enabling a digital thread of data to describe a system and its environment, expected behavior, functional definition and allocation, product definition, integration and assembly, and test and evaluation.  The ideal candidate possess an engineering background combined with experience in conceptual development, system architecture and/or design, and software or mathematical modeling, as well as knowledge background in object-oriented software design methodologies and the ability to manage inputs from a set of multiple and diverse stakeholders to support understanding of system components, interfaces, and their traceability.


 
Basic Qualifications:
- Bachelor’s degree in a STEM discipline (Science, Technology, Engineering, Math) with 3 years of related professional experience or a Master's degree with at least 1 years of related experience.
- Must be able to obtain and maintain a U.S. Government Secret security clearance (U.S. citizenship is a pre-requisite).
- Familiarity with systems engineering processes and methodologies including CONOPS and use case definition, architecture definition and design, requirements development and allocation, integration and test, and verification and validation.
- Experience in Systems Modeling Language (SysML) or Unified Modeling Language (UML).
- Knowledge of software programming languages and databases and the ability to apply to software domain.
- Experience in mathematical modeling and/or object-oriented software design methodologies.

Preferred Qualifications:
- Detailed experience in systems engineering process and application of model-based concepts to system processes
- Detailed experience in architecture and system design development including definition of the functional and product baselines
- Detailed knowledge of MBSE frameworks, including UAF, DODAF, MODAF, NAF, Zachman, and TOGAF, as well as language implementations including UPDM, BPMN, SysML, and UML.
- Knowledge of general and real-time software development and testing tools, capability and usage. Real-time tool examples include cross compliers, target debuggers and test/performance instrumentation.
- Knowledge of real-time target environments, including processor and network architectures, communication protocols, simulation frameworks and electrical interfaces.
 
 
Job Number: 1910104846
Job Location: Annapolis, MD
Duration: 6 months
Input Date: 02/07/2020
Last Updated: 09/23/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Mike Flanery
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: cecjdallasav@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GUyGQAW&URLSource=cjhunter

NC Programmer

Description:

PDS Tech is looking for a Numerical Control Programmer for a position in St. Louis, MO


Actively collecting and screening resumes for upcoming needs. 

  • To define, plan, design and refine fixtures, data and processes necessary to facilitate and control the manufacture of products in the St. Louis facilities.
  • Plans, creates, verifies and revises machine control data and documentation that direct the operation for multi-axis numerically controlled machines and robots required to manufacture and inspect complex parts and tools.
  • Provides numerical control, machining and programming technical expertise to cross-functional engineering and manufacturing team.
  • Establishes technical requirements for manufacturing and producibility. 
  • Defines and designs complex fixtures used to manufacture or inspect parts. 
  • Plans, guides and facilitates the development and integration of new machining techniques and manufacturing methods or inspection techniques, processes and software.
  • Continuously improves the quality of manufacturing processes and supplier-provided work


 


 Experience and Qualifications: 
  • Minimum of 4 years recent NC Programming experience, using CAD/CAM systems to analyze and modify part models and produce programs required.
  • Aerospace manufacturing experience is required. 
  • Significant CATIA V5 experience is required.
  • 3, 4, and 5 axis experience 
  • Familiarity with Windows environments and office tools.
  • Machinist experience preferred.
  • Familiarity with Vericut preferred

 Education:

  • Bachelor’s Degree or Associates Degree in Manufacturing Technology or related field is preferred.  Combination of education and experience will be considered in lieu of degree.

Physical Demands:

  • Frequently required to spend long hours sitting at a work stations and using office equipment. 
  • May be required to walk or stand for brief periods
  • May be required to use stairs when elevator is not available
  • May occasionally lift, carry, push, pull or otherwise move up to 25 pounds of office supplies and materials 
  • May be required to reach with arms and hands and to stoop, kneel or crouch

Please send resumes to gsanchez@pdstech.com or call 314-264-3135 to discuss. 
 
Job Number: 2010112352
Job Location: Hazelwood, MO
Per Diem: Yes
Duration: 6 months
Input Date: 04/24/2020
Last Updated: 09/23/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fmjeQAA&URLSource=cjhunter

Niche - Senior Wordpress Developer

Description:
PDS Tech is seeking a NIche - Senior Wordpress Debeloper in Lewisville, TX, for a 3-month contract with potential to go permanent.


•             Create and maintain web content in Client WordPress instances in collaboration with stakeholders and teammates
•             Manage and maintain WordPress platform and plugins
•             Be ready to think through problems, help fix them, mentor and support others, think outside the box and ask questions.

Now, more specifically you would:
•             Lead the development of WordPress sites collaborating with both domestic and offshore development teams.
•             Develop responsive, standards-compliant HTML and CSS3 themes for WordPress
•             Install, test, and debug WordPress plugins and develop new plugins as needed
•             Evaluate designs for potential development issues and flag problems appropriately
•             Conduct cross-browser and cross-device testing
•             Prototype functionality for Legal and executive review
•             Take ownership of initial code quality including unit testing
•             Provide technical support to internal customers
•             Be responsible for the health and maintainability of our codebase
•             Monitor and maintain/enhance the ongoing performance of associated systems
•             Other duties as assigned

 
•             Graduation from a 4-year college or university with a degree in computer science or related field (equivalent work experience may be considered.)
•             5 years of professional experience as a software developer / programmer analyst with background in the skills below.
o             Object Oriented Programming
o             Software design patterns
o             JavaScript
o             React
o             Redux
o             GraphQL
o             MYSQL
o             PHP
o             Ecmascript 6
o             CSS3
o             HTML5
o             REST Services
o             GIT Version Control
o             Command Line $BASH etc.
o             Web server technology - Apache, NGINX or similar
o             Experience with Document Object Model (DOM) and Regex helpful

You’re a great fit if you have these skills:
•             Expert PHP development
•             Expert HTML & CSS skills with full understanding of web standards and responsive design techniques
•             Understanding of jQuery and other JavaScript libraries
•             Experience with WP-CLI tool
•             Basic understanding of accessibility best practices, Section 508 compliance and/or WCAG 2.0 standards
•             Experience with Scrum and Agile Methodology
•             Ability to estimate time and level of effort for front-end development tasks
•             Excellent communication skills, attention to detail and ability to work in a fast-paced, collaborative team environment
•             Detail oriented, well organized, able to thrive in deadline driven environment while working on a number of projects simultaneously and independently
•             Excellent written and oral communication skills
•             Experience with consumer-facing web sites
•             Experience with Chrome debugger and development tools
•             Grow expertise by proactively staying current with digital media and technologies
 
 
Job Number: 1910105115
Job Location: Lewisville, TX
Duration: 3 months
Input Date: 01/13/2020
Last Updated: 09/23/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Satish Gadasu
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: cecjdallasav@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GVm8QAG&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
PCB Design Engineer

Description:
In this position the engineer will design and develop complex electronic hardware systems for aircraft. A major focus of this mission critical engineering role will involve developing aircraft electronic systems. The engineer will be responsible for Circuit design, Field Programable Gate Array (FPGA) programing, and Printed Circuit Board (PCB) and Circuit Card Assembly (CCA) designs working on a cross functional team. Working on a cross functional team the engineer will be working with mechanical and software design teams to develop a complete qualified flight tested aircraft solutions.

The engineer will have an opportunity have an impact on the following areas: Requirements analysis/derivation, concept development, hardware architecture, component selection, schematic capture, reliability analysis (derating, thermal, signal integrity, power integrity, stability, overstress), design verification, system integration, and qualification.

REQUIRED EXPERIENCE:
- Experience with circuit design concepts
- Experience in circuit analysis, troubleshooting, test instrumentation, and data analysis tools
- Experience with Printed Circuit Board (PCB) board design and Circuit Card Assembly (CCA) design
- Experience with VHDL, Verilog, or System Verilog languages to support FPGA firmware programing
- The technical ability to effectively define and interpret system level requirements and derive the requirements necessary to interface between lab and hardware
- The ability to work well in a teaming environment with other disciplines (Systems Engineering, Software Engineering, Mechanical Engineering, etc.)

DESRIED EXPERIENCE:
- Experienced using Xilinx and/or Microsemi FPGAs
- Experienced with design and simulation tools (Xilinx Vivado, Microsemi Libero, Mentor QuestaSim)
- Experience with Perl, Visual Basic, and C/C++,
- DO 178C/254 verification
- High Speed and RF design
- Cadence schematic capture, PCB layout Allegro

EDUCATION:
Accredited BS Degree in Electrical Engineering or closely related technical field or equivalent experience/combined education

WORK HOURS:
4/10
Full-Time
 
Job Number: 186149
Job Location: Fort Worth, TX
Rate: $68.16/hr
Per Diem: split
Overtime: not specified
Duration: 12/+ mos
Start Date: ASAP
Input Date: 07/20/2020
Firm Name: CHIPTON ROSS
Attention: Terry Jones
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

PCB Designer using Mentor Xpedition

Description:
Responsible for printed circuit board (PCB) designs from conception to manufacturing including library part creation, schematic capture, component placement, routing, gerber / ODB++ file creation and all documentation.

Xpedition environment with working knowledge of Xpedition VX1.1. Advanced level skills to include placement, routing, use of the auto-router, constraint manager, xDM and xDM Library Client. Use of BluePrint to create complex PCB drawings. • Must have experience designing complex analog, digital, RF, and mixed technology, multi-layer designs with HDI technology, high speed routing including DDR circuitry along with other similar complex technologies and skills to include signal integrity export and analysis. • Export manufacturing data of both Gerber and ODB++ and use of Valor Design Rule Checking software.
 
Job Number: 23618R
Job Location: AL
Per Diem: offered
Overtime: possible
Duration: Contract
Start Date: May 4th
Input Date: 03/31/2020
Last Updated: 09/23/2020
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: davellino@advancedtechno.com
Website: www.advancedtechno.com

Power and Electrical Engineer

Description:
The position includes both avionics systems tasks and hands-on electrical design, development, and test tasks.

The scope of the electrical design engineering position includes:
  • Flight avionics hardware
  • Signal conditioning
  • Data acquisition
  • Actuator control
  • RF communication
  • Wire harness elements
  • Flight software, including hardware interface
  • Ground support electronics hardware
  • Integrated vehicle health monitoring


Duties & Responsibilities:

  • Develop subsystem requirements
  • Decompose subsystems requirements to electrical hardware and software requirements
  • Capture electrical hardware requirements from system specifications, design standards, safety analysis, and other sources
  • Document derived requirements from the design process and design artifacts.
  • Validate the derived requirements
  • Trace the hardware requirements to their parent requirements, to their implementation in the electronic hardware, and to their verification results
  • Generation of requirement compliance matrix, analysis and status reports
  • Generation of the justification and description in support of the airworthiness case for the electrical hardware
  • Develop the life-cycle scope of electrical subsystems including design, debugging, test, deployment and performance analysis.
  • Document designs with engineering drawings and written descriptions.
  • Write fabrication and test procedures.
  • Present at and participate in design reviews.


Professional Requirements:

  • Avionics engineering experience on aircraft and/or spacecraft projects
  • Hands-on electrical / electro-mechanical design experience
  • Must have the ability to layout power & electromechanical systems
  • Skill applying C++ and embedded software programming to avionics
  • Experience with DO-178 and DO-254 is a plus
  • Must understand the systems engineering process
  • Must be a “U.S. person” as defined by the ITAR (22 CFR §120.15)


 
Job Number: 2010115014
Job Location: Mojave, CA
Duration: 36 months
Input Date: 06/03/2020
Last Updated: 09/23/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003Ot7FQAS&URLSource=cjhunter

Principal Engineer Systems Test

Description:
Chipton-Ross is seeking a Principal Engineer Systems Test for an opportunity in Melbourne, FL.

RESPONSIBILITIES:
Here at Northrop Grumman we developed the B-2 Bomber, Global Hawk surveillance system, James Webb Space Telescope, and dozens of other leading edge systems. Just imagine what were working on now! The Melbourne Aircraft Design, Engineering and Test Department is looking for passionate and dedicated System Integration Test & Evaluation (SIT&E) Test conductor to join our Lab System Test team in Melbourne, FL. The SIT&E Team is responsible for completing verification of system level hardware and software capabilities developed and integrated for a classified program.

REQUIRED EXPERIENCE:
Bachelor's Degree with 5 years of relkevant experience.

EDUCATION:
Bachelor's Degree.
School must be accredited.

HOURS:
9/80 workweek.

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.


 
Job Number: 183531
Job Location: Melbourne, FL
Rate: Up to $49.00 DOE
Duration: 1 year
Input Date: 12/11/2019
Last Updated: 09/23/2020
Firm Name: CHIPTON ROSS
Attention: Robert Davis
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: rdavis@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Software Developer

Description:
Essential Functions:

• Develops computer systems specifications that address business requirements and that fit with the companies system architecture standards.
• Establishes and documents system parameters and formats, ensures hardware and software systems compatibility and coordinates and/or modifies system parameters in terms of existing and projected computer capacity and capabilities.
• Design, develop, and maintain scalable SharePoint sites, including customizations, maintaining permissions, and supporting multiple users/projects/deadlines.
• Working with leads, complete some SharePoint to .NET conversion projects with minimal supervision.
• Revises existing systems and procedures to correct deficiencies and maintain more effective data handling, conversion, input/output requirements, and storage.
• Manages all aspects of ongoing projects and serves as liaison between various stakeholders.
• Reviews status of projects and budgets; manages schedules and prepares status reports.
• Assesses project issues and develops resolutions to meet productivity, quality, and client-satisfaction goals and objectives. Individual will be responsible for managing large and small scale projects for programs and functional homeroom.
• Works independently with little oversight.
• Is able to receive requirements at a high level and derive lower level requirements by working directly with internal customers turning complex processes into user-friendly tools.
• Candidate should be able to perform all phases of the development lifecycle: initial requirements gathering, architecture design, development, testing, and training.
• Candidate needs to cooperate with teammates on best practices and possible re-use of applications.
• Ideal applicant will be enthusiastic about process improvement, efficiency, excellent customer service, and working with different teams from all functions.
• Candidate should be able to juggle multiple assignments and manage changing priorities.
• Strong project management and communications skills are highly desired.
 
We offer flexible work arrangements, great learning opportunities, exposure to a wide variety of projects and customers, and a very friendly team environment. We are looking for self-motivated, proactive, and goal-oriented people to help us grow our services and become even better at what we do.
 
Qualifications:

Basic Qualifications:


• Bachelor’s Degree in a Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university and 6+ years of software development experience
• 6+ years of experience in most of the following: C#, MS Visual Studio, ASP.NET, MVC, strong JavaScript (and JavaScript debugging), jQuery, AJAX, XML, Web Services and/or related technologies, T-SQL and/or DTS packages for MS SQL Server, MS VBA, SSRS.
• 2+ years of experience developing and maintaining SharePoint sites
• U.S. Permanent Resident or U.S. Citizenship
 
Preferred Qualifications:

• Able to work onsite in Melbourne, FL (but not a requirement to start)
• Solid understanding of modern HTML/CSS
• Proficient with REST-based API’s, JSOM, CAML, XML, and XSL
• Experience with .NET/SQL
• Experience with OOTB workflows
• Proficient with OOTB web parts
• Extremely Skilled at SharePoint permission maintenance and user support with OOTB SharePoint issues and light customization
• Strong working experience with NGC SharePoint governance rules
• Experienced site collection administrator and site owner
• SharePoint 2010 and 2013
• Excellent oral and written communication skills
• A Master's Degree in a STEM discipline (Science, Technology, Engineering or Mathematics)
• Thorough understanding of Aerospace effectivity management principles
• Experience with Agile Processes and Methodologies in particular SCRUM
• Able to travel at least 10% of the time.
• Active, in-scope, DoD Secret Clearance (or higher) in good standing 
 
 
Job Number: x20200071
Job Location: Melbourne, FL
Rate: $45/hr
Duration: Up to 1 year
Input Date: 04/20/2020
Last Updated: 08/03/2020
Firm Name: XPEERANT
Attention: Woody Arnold
Address: 4308 N GARFIELD AVE
City, State: LOVELAND, CO 80538
Phone: 970/282-9287
Website: www.xpeerant.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principle software Developer 3

Description:
 
Essential Functions:

• Develops computer systems specifications that address business requirements and that fit with the companies system architecture standards.
• Establishes and documents system parameters and formats, ensures hardware and software systems compatibility and coordinates and/or modifies system parameters in terms of existing and projected computer capacity and capabilities.
• Design, develop, and maintain scalable SharePoint sites, including customizations, maintaining permissions, and supporting multiple users/projects/deadlines.
• Working with leads, complete some SharePoint to .NET conversion projects with minimal supervision.
• Revises existing systems and procedures to correct deficiencies and maintain more effective data handling, conversion, input/output requirements, and storage.
• Manages all aspects of ongoing projects and serves as liaison between various stakeholders.
• Reviews status of projects and budgets; manages schedules and prepares status reports.
• Assesses project issues and develops resolutions to meet productivity, quality, and client-satisfaction goals and objectives. Individual will be responsible for managing large and small scale projects for programs and functional homeroom.
• Works independently with little oversight.
• Is able to receive requirements at a high level and derive lower level requirements by working directly with internal customers turning complex processes into user-friendly tools.
• Candidate should be able to perform all phases of the development lifecycle: initial requirements gathering, architecture design, development, testing, and training.
• Candidate needs to cooperate with teammates on best practices and possible re-use of applications.
• Ideal applicant will be enthusiastic about process improvement, efficiency, excellent customer service, and working with different teams from all functions.
• Candidate should be able to juggle multiple assignments and manage changing priorities.
• Strong project management and communications skills are highly desired.

We offer flexible work arrangements, great learning opportunities, exposure to a wide variety of projects and customers, and a very friendly team environment. We are looking for self-motivated, proactive, and goal-oriented people to help us grow our services and become even better at what we do.

Qualifications:

Basic Qualifications: 


• Bachelor’s Degree in a Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university and 6+ years of software development experience
• 6+ years of experience in most of the following: C#, MS Visual Studio, ASP.NET, MVC, strong JavaScript (and JavaScript debugging), jQuery, AJAX, XML, Web Services and/or related technologies, T-SQL and/or DTS packages for MS SQL Server, MS VBA, SSRS.
• 2+ years of experience developing and maintaining SharePoint sites
• U.S. Permanent Resident or U.S. Citizenship
 
Preferred Qualifications:
• Able to work onsite in Melbourne, FL (but not a requirement to start)
• Solid understanding of modern HTML/CSS
• Proficient with REST-based API’s, JSOM, CAML, XML, and XSL
• Experience with .NET/SQL
• Experience with OOTB workflows
• Proficient with OOTB web parts
• Extremely Skilled at SharePoint permission maintenance and user support with OOTB SharePoint issues and light customization
• Strong working experience with NGC SharePoint governance rules
• Experienced site collection administrator and site owner
• SharePoint 2010 and 2013
• Excellent oral and written communication skills
• A Master's Degree in a STEM discipline (Science, Technology, Engineering or Mathematics)
• Thorough understanding of Aerospace effectivity management principles
• Experience with Agile Processes and Methodologies in particular SCRUM
• Able to travel at least 10% of the time.
• Active, in-scope, DoD Secret Clearance (or higher) in good standing 
 
Job Number: x20200068
Job Location: Melbourne, FL
Rate: $45.00/hr
Duration: Up to 1 year
Input Date: 04/22/2020
Last Updated: 08/03/2020
Firm Name: XPEERANT
Attention: Woody Arnold
Address: 4308 N GARFIELD AVE
City, State: LOVELAND, CO 80538
Phone: 970/282-9287
Website: www.xpeerant.com

Product Support Engineer

Description:
• Applies the Autodesk Inventor 3D CAD system to create mechanical layouts and drawings.
• Modifies mechanical and electromechanical assemblies using design for manufacturing (DFM), design for assembly (DFA) principles.
• Develops detailed fabrication and assembly drawings, performs tolerances analysis, design studies and trade studies.
• Specifies mechanical standards and best practices.
• Troubleshoots and resolves mechanical manufacturing and assembly issues.
• Support testing, installation, operation, maintenance and repair of electromechanical equipment.
• Generates project cost estimates and maintains project budgets and schedule.
• Generates engineering design change orders • Generates engineering Bills of Materials (BOMs) • Uses established and well defined engineering procedures.
• Able to work simultaneously on a variety of projects.

• In pursuit of a Bachelor of Science degree in Mechanical Engineering or Mechanical Engineering Technology • 0-3 years of experience in mechanical engineering design of electromechanical equipment and systems.
• Practical experience with computer aided design and analysis software tools.
• Good communication skills
• Completed statics/dynamics, vibration and fluid dynamics course work.
 
Job Number: B4111
Job Location: Northwest, MA
Rate: $29-$40
Per Diem: Possible
Overtime: Possible
Duration: 6+ months
Start Date: 6/22/2020
Input Date: 06/17/2020
Last Updated: 09/23/2020
Firm Name: ADVANCED TECHNOLOGY
Attention: Brittany
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: brao@advancedtechno.com
Website: www.advancedtechno.com

Programmer

Description:
PDS Tech is seeking a candidate for a Programmer position located in Richardson, TX.

Job Description
Services Operations & Maintenance is looking for a talented and highly motivated Software Developer with full stack experience designing and creating web applications for both internal and external customers. The selected candidate must be familiar with all layers in computer software development, the ability to work on both the front-end and back-end portions of an application, and possess functional knowledge to take a concept and turn it into a finished product.

Accountabilities
• Design, develop, and maintain a software application to capture, store, and visualize data
• Optimize system architecture and framework to facilitate business goals and growth
• Interact with internal and third party stakeholders to define business processes and software requirements
• Interface with analysts and business unit leaders to create automations and new tool sets to solve problems in a fast paced agile environment


 
Qualifications

Required
• Strong analytical and problem solving skills
• Working knowledge with various database systems
• Ability to normalize and automate transfers of disperse datasets to centralized locations
• Experience designing and building web applications to visualize data
• Familiarity with various programming languages (JavaScript, Python, Java, CSS, HTML, Perl, etc.)
• Vast experience using web frameworks (Vue.js, Angular.js, Django, Laravel, Node.js, Yii, Meteorjs, etc.)
• Exposure to visualization libraries (Graphana, Chart.js, Chartist, C3.js, Highcharts, Nvd3, Flot, etc.)
• Experience with both SQL and nonSQL database schemas
• Extensive knowledge with experience in API design and web service communication protocols (REST, SOAP, etc.)


Desired
• Bachelor’s degree or higher in Computer Science, Information Systems or equivalent engineering field
• Strong interpersonal skills and experience working with cross-functional teams
• Creative eye with ability to conceptualize and communicate “big picture” goals
• Comfortable performing product vendor evaluations
• Detailed analytical abilities and technical writing skills
• Flexible and able to handle several projects simultaneously
• Telecommunication Industry Knowledge and Skills

 
 
Job Number: 1910104231
Job Location: Richardson, TX
Per Diem: No
Duration: 3 months
Input Date: 02/07/2020
Last Updated: 09/23/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Satish Gadasu
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: cecjdallasav@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GSyCQAW&URLSource=cjhunter

Programmer Analyst 4

Description:
Chipton-Ross is seeking 5 Programmer Analyst 4's located in Plano, TX.

RESPONSIBILITIES:
Leads and performs the design, program, test, implementation and documentation of complex computing applications and software or computing architecture and computing application system designs. Leads analysis of end user processes to define application requirements. Writes and compiles complex code based on documented design or designs application architecture that integrates application software and delivery subsystems for specific applications. Modifies or upgrades complex applications to maintain functionality and performance. Identifies and recommends improvements. Identifies and resolves complex programming or application architecture problems.

REQUIRED EXPERIENCE:
Need to be experienced candidates in SAP Hybris, Azure Cloud, eComm solutions, Java, Spring, JavaScript, CSS, HTML and API integrations.

EDUCATION:
Accredited Education/experience typically acquired through advanced technical education (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience, 13 years' related work experience, etc.).

WORK HOURS:
Full-Time/First Shift
8:00 am - 5:00 pm
 
Job Number: 184327
Job Location: Plano, TX
Rate: $DOE
Duration: 6 months
Input Date: 01/27/2020
Last Updated: 09/23/2020
Firm Name: CHIPTON ROSS
Attention: Robert Davis
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: rdavis@chiptonross.com
Website: www.chiptonross.com

Project Manager

Description:
PDS Tech, Inc. is seeking a Project Manager in Auburn Hills, MI.

Responsibilities:

  • Product development process and ensure processes are followed and all product documents and data are completed and stored.
  • Review and manage project scope, goals, resources, and deliverables.
  • Track and report project costs, milestones, and other key project metrics.
  • Prepare team for internal and external design reviews to minimize technical and commercial risks.
  • Execute change management; document scope requirements and associated risks, track and revise project timeline, forecast project cost and communicate through the appropriate channels.
  • Provide regular status updates and be the contact person/interface to all involved departments & parties.
  • Drive engineering and operations teams to keep projects on time and on target.
  • Manages projects in all aspects of New Product Introduction processes from project initiation through successful transfer into production in manufacturing locations worldwide.
  • Suppliers lead.
  • Customer satisfaction oriented.

Qualifications/Education:
  • Minimum five years’ experience as a project manager managing multiple projects in engineering and production environment.
  • Knowledgeable of E/E and/or software engineering, design and analysis. Previous E/E and/or software engineering design and analysis experience is a bonus. Prefer experience working with integrated display units.
  • Bachelor’s degree or equivalent required; degree in technical field preferred.
  • Must be able to read, write, and speak English fluently.
  • Proficient in Microsoft Office Suite including MS Project.
  • Experience with Catia v5 is helpful.
  • Self-motivated with ability to function in a high energy, fast paced team environment with minimal direction.
  • Experience collaborating across multifunctional teams.
  • Must have excellent planning and organizational skills.
  • Able to build up new customers relationship and trust, to develop and consolidate long terms cooperation.

 
Job Number: 1910101837
Job Location: Auburn Hills, MI
Duration: 12 months
Input Date: 05/09/2019
Last Updated: 09/23/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Katie Windhurst
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033g9xQAA&URLSource=cjhunter

Quality Control Technician - Secret

Description:
PDS Tech, Inc. is seeking a Quality Control Technician, Redondo Beach, CA.

Summary:

  • Performs analyses and tests of raw materials, packaging materials, and/or finished products from manufacturing, to ensure quality standards and compliance to customer and regulatory requirements, and tolerance specifications for the chemical or physical property.
  • Performs a variety of qualitative tests or qualitative assays on samples, and to aid in maintenance and certification of test instruments and apparatus to ensure compliance
  • Prepares and monitors quality statistics and reports. Reviews production records for conformance to procedures. Conducts non-conformance tests of manufactured, packaged or tested product.

Basic Qualifications:


  • High School diploma or equivalent and 0 years additional education and/or related experience
  • Already possesses and ability to maintain SECRET DoD clearance
  • Must be able to work any shift/overtime (as needed)
  • Must be technically proficient in Microsoft Office Suite to include but not limited to Word, Excel, Power Point and Outlook.
  • Must be able to perform moderately strenuous physical and repetitious work to include climbing, bending, crawling, stooping, and kneeling, lifting, working with arms overhead, leaning and laying.
  • Must be able Lift, grip, push, pull and hold 25+ pounds.
  • Must be able to work in and around Confined spaces to include but not limited to fuel tanks and ducts.
  • Must be able to push and pull own body weight to enter and exit confined spaces.
  • Must have some programming experience.


Preferred Qualifications:


  • Experience developing in an Agile environment
  • Experience in Software Engineering
  • Experience in Software Automation
  • Understanding of DevOps









 
 
Job Number: 2010113848
Job Location: Redondo Beach, CA
Duration: 12 months
Input Date: 04/22/2020
Last Updated: 09/23/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Patrick Mahoney
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: cecjdallasav@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003OnvgQAC&URLSource=cjhunter

RF Microwave and Hardware Subsystem Design Engineer

Description:
PDS Tech inc is seeking a Microwave and Hardware Design Engineer in Baltimore, MD

The qualified candidate will work with a diverse and talented team of engineers developing innovative and cost-effective systems that support a broad range of products and business areas across the lifecycle of a program.  Responsibilities may include development of antenna architectures, receiver / exciter architectures, requirements generation/flow down; subsystem analysis including hardware from RF to digits, performance modeling, support for performance testing, requirements verification, and more.

Experienced applicants will have at least a Bachelor’s Degree in Science or other related technical degree and have experience designing, developing and/or testing radio frequency (RF) and/or microwave antenna systems and/or related RF hardware
In addition, this candidate should have demonstrated technical ability/leadership and expertise in one or more of the following areas:

- Active electronically scanned arrays (AESAs)

- Highly integrated subsystems including antenna hardware

- Reflectors, Reflect Arrays, Digital Beam Forming

- Antenna/RF Performance Analysis

- Computational Electromagnetics, Statistics

- Antenna or Subsystem Control Design

- Antenna Measurements and Data Reduction

- Antenna range integration, test, and system integration

- Subsystem requirements (hardware and software) derivation, flow-down, and configuration

The Engineering RF Microwave Design positions require the candidates to have the ability to obtain and maintain at least a Secret Clearance per business requirements. An active Secret or higher clearance is a plus!

This is a Dual level opening, candidate will be considered at both a level 3 or 4 based upon the Basic Qualifications listed below.

Qualifications:
Basic Qualification for a Band 3:

Must have a Bachelor's Degree in Engineering or related discipline with 5 years of experience in the areas described in the job description or 3 years of experience with a Master's Degree and/or 0 years of experience with a Ph. D.

Ability to Obtain and Maintain and Active Secret Clearance.

 
 
Job Number: 1910104510
Job Location: Baltimore, MD
Duration: 6 months
Input Date: 07/25/2019
Last Updated: 09/23/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Mike Flanery
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GTuwQAG&URLSource=cjhunter

RF Test Program Set (TPS) Design Engineer (Secret Clearance)

Description:
PDS Tech Inc. is seeking an RF Test Program Set (TPS) Design Engineer (Secret Clearance) in Baltimore / Linthicum Heights, MD.
 
Required Skills/Attributes or Domain Knowledge:
  • Mix of hardware RF/Digital and software skills (C/C++)
  • Background and working knowledge in RF theory and concepts
  • Test design and integration background
  • Candidate must be hands on person and have personal experience with test.

 
Electrical Engineering or Computer Engineering Degree and 5+ years of industry experience.  Will accept candidates with more experience (8+ years) to fill at a higher level
 

 
Job Number: 1910107903
Job Location: Baltimore, MD
Duration: 0 months
Input Date: 10/18/2019
Last Updated: 09/23/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fP4yQAE&URLSource=cjhunter

Reliability & Maintainability Engineer 3 & 4

Description:
Job Description:
  • Analyzes requirements and develops an R&M engineering program to achieve customer objectives.
  • Analyzes projected utilization and calculates effect on final system reliability based on individual part reliabilities.
  • Allocates top level R&M quantitative requirements to design teams. Performs reliability predictions and track performance.
  • Develop FMECAs; Support Airworthiness and safety engineering as required
  • Perform Maintainability Analysis; leverage human factors and quality engineering best practices
  • Perform Reliability Centered Maintenance (RCM) analysis; leverage MSG-3 best practices
  • Perform Reliability Development Testing (HALT/CAST)
  • Perform R&M analyses and assessments on selected systems and influence Fault Detection and Isolation BIT requirements
  • Run scripts to translate these models into a form that is executable logic on the aircraft, and simulate intended operation.
  • Work with the real-time software development team to integrate the resulting executable applications into the Mission Computing hardware.
  • Develop Testability models from schematics, FMECAs, ICDS and other available supplier documentation to assess compliance to customer fault detection/isolation requirements.  Perform Failure Modes and Effects Testing (FMET)
  • Develop FRACAS plan and deploy closed loop FRACAS; lead FRB; Maintain RGC’s and perform Weibull Analysis

Required:
  • Minimum of 5 years experience performing R&M Engineering
  • Bachelor's, Master's, or PhD with 7 or more years' experience. Degree from an accredited course of study, in engineering, computer science, mathematics, physics, or chemistry. ABET is the preferred, although not required, accreditation standard.
  • Radar / Propulsion / Avionics / Hydromechanical and other relevant Aero system knowledge required.
  • Microsoft Excel, MATLAB/Simulink, Boeing RAMC, and Vanderbilt FACT run time reasoning tools.
  • MIL-HDBK-217F Reliability Prediction Electronic Equipment.
  • Rome Air Development Center AD-A153 744 Reliability Derating Procedure.
  • MIL-STD-1629 Rev A Procedure for Performing a Failure Mode, Effects and Criticality Analysis.
  • The ability to obtain a US Interim Security Clearance clearance pre start, final post start which requires US Citizen.

 
Job Number: 2010110791
Job Location: Saint Louis, MO
Duration: 12 months
Input Date: 01/20/2020
Last Updated: 09/23/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Marjorie Santiago-Marquez
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002ffBOQAY&URLSource=cjhunter

Scientist II - Protein Purification

Description:
Chipton-Ross is seeking a Scientist II - Protein Purification for an opening in Carlsbad, CA.

SUMMARY:
Work in a team based environment to perform all tasks related to the production of purified proteins for use in research and commercial products for use in the life sciences industry. Complete all production in compliance with site Quality Management System and ISO 9001.

RESPONSIBILITIES:
Responsible for manufacturing product(s) in a lab setting following standard operating procedures. Will utilize basic laboratory techniques, calculations, materials measurement, operation of laboratory equipment and record keeping necessary to manufacture products. Will perform column purification/ chromatography, buffer preparation, SDS-Page Analysis, Western Blotting, and other protein characterization techniques. Responsible for Batch Data Records, notebooks, customer reports and work order documents. Utilize specialized technical knowledge and skills to make detailed observations and analyze data to ensure within operating parameters. Advise manager of factors that may affect quality of product. Suggest options/ideas for corrective actions. Maintain equipment, product inventories and related records as assigned. Note variances on manufacturing documents; audit and evaluate process documents and propose revisions. Complete, distribute and file records as required in accordance with Document Control Practices. Identify potential issues in the production process; report findings to team management and members for resolution or participate in troubleshooting. Write technical documents which may include standard operating procedures and batch records. May lead process improvement projects or product transfer projects. May perform other related duties as required and/or assigned.

REQUIREMENTS:
Requires a minimum of 4 years relevant protein purification experience demonstrating laboratory techniques in a manufacturing environment or research laboratory. Demonstrated proficiency in the use of scientific laboratory techniques, equipment and materials required. Experience in the use of basic laboratory techniques, including buffer preparation, column purification/ chromatography, SDS-Page Analysis, Western Blotting, and other protein characterization techniques are beneficial. Proficient with GE AKTA FPLC protein chromatography equipment and Unicorn software, or equivalent FPLC platform. Experience with different modes of chromatography such as: affinity, ion-exchange, size exclusion, hydrophobic interaction Lifting up to 35 lbs will be required on a frequent basis. May be required to stand for long periods of time while performing duties and daily work in +4C Cold Room. Must be flexible to work varying schedules and hours as needed. Must be able to work safely with chemicals and hazardous materials.

Preferred Qualifications (nice to have):
Consistent, dependable and accurate in carrying out responsibilities. Displays positive attitude toward job and others. Follows and provides direction accurately and efficiently. Excellent documentation and communication skills. Demonstrated ability to carry out scientific procedures and make recommendations for improvement required. Good problem solving skills necessary. Working knowledge of manufacturing related computer software preferred. Intermediate Excel skills.

EDUCATION:
Must have an accredited bachelor's degree in Biology, Chemistry, Biochemistry, or other related discipline. Masters degree is a plus.

WORK HOURS:
Full-Time
1st Shift
 
Job Number: 186204
Job Location: Carlsbad, CA
Rate: $DOE
Duration: 12 mos
Input Date: 06/18/2020
Last Updated: 09/23/2020
Firm Name: CHIPTON ROSS
Attention: Johnnie Barrientos
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: jbarrientos@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Facilities Engineer III

Description:
****Candidates must be a U.S. Citizen without Dual Citizenship****
****Must be able to obtain a Secret Clearance if needed****

Duties:
1. Under general direction, the Senior Facilities Engineer determines approaches to objectives demonstrating a complete understanding and application of principles, concepts, and practices.

Typical responsibilities include:
1. Provides solutions to problems involving unusual complexity
2. Conceives and plans facilities engineering projects involving the development of new approaches and methods to attain objectives
3. May provide input to department objectives and long-range goals
4. Keeps current within area of specialty in support of project assignments
5. Provides technical advice on projects, including feasibility, planning, costs, and time
6. Prepares data required for special projects to ensure maximum cost effectiveness
7. Acts as a technical advisor and expert on process systems, as well as equipment and manufacturing facilities
8. Ensures that work performed by the Company’s personnel or contractors conforms to national, state and local laws, regulations and codes
9. Develops standards and design criteria for projects such as the construction and renovation of facilities, office and plant layouts, space planning, etc.
10. May direct critical projects with large scope and difficult complexity
11. May represent the organization at staff meetings, project review meetings, etc.
12. May assign projects and provide direction to less senior employees and support staff
13. Represents the Company as the prime contact on assigned facilities engineering projects
14. May plan, schedule, oversee, and assign preventive maintenance and repair assignments
15. Plans procurement strategies and provides technical expertise in the construction of well head facilities, pipelines, and treatment plants

Skills:
Knowledge of:
1. Facilities Engineering principles and practices
2. Standards, codes, and regulations pertaining to the design, construction, and maintenance of structures and facilities
3. Computer systems and applicable software
4. Modern materials, methods, and techniques of design, construction, installation, and maintenance of structures and facilities
5. Site remediation and treatment operation
6. Development and use of contracts, estimates, and specifications
7. Techniques and procedures of project management and procurement
8. Occupational Safety and Health regulations and safe work practices
9. Elements of cost in construction and maintenance, including the determination of unit cost records
10. Cost of construction and maintenance, including the determination of unit cost records
11. Building construction processes and procedures, equipment, tools, materials, and their application
12. Local, state, and federal building codes and standards
13. Inspection and investigation techniques
14. Use of engineering instruments and tools
15. Facility and equipment maintenance principles and practices

Ability to:
1. Make engineering designs and prepare complete plans for projects
2. Maintain records and prepare reports and correspondence related to the work
3. Physical skill and ability to inspect working environments, which may include climbing ladders and operating equipment
4. Communicate effectively with others
5. Maintain favorable public relations
6. Read and interpret construction blueprints, plans, drawings, and specifications
7. Analyze costs of construction projects
8. Determine compliance of structures and specifications
9. Learn and utilize computer aided design system
10. Maintain records and prepare reports and correspondence related to the work
11. Use computers and available software applications to maintain records and prepare technical reports

Desired:
1. Have experience as a project lead working on capital projects greater than (USD)5M in scope.

Education:
1. A Bachelor's degree in an appropriate discipline and six (6) years of directly related experience, or an equivalent combination of education and experience.
 
Job Number: 12464
Job Location: Camden, AR
Rate: $55.00 - $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 07/14/2020
Last Updated: 07/28/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior GNC Engineer

Description:
Senior Guidance, Navigation and Control Engineer job in Louisville, Colorado is available with one of Belcan's top aerospace clients. In this job you will use your skills and expertise to design and test algorithms, flight software, related hardware, design tools, simulations, and more for various aerospace vehicles. These cover a very wide range from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. You'll explore complex GN&C algorithms and systems to assess performance of vehicle flight qualities and capabilities. Your technical duties involve the design, development, evaluation, and test of new products and processes throughout the product lifecycle.

Responsibilities:
* Design and test algorithms, flight software, related hardware, design tools, simulations, and more for various aerospace vehicles.
* Cover a very wide range from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems.
* Explore complex GN&C algorithms and systems to assess performance of vehicle flight qualities and capabilities.
* Design, development, evaluation, and test of new products and processes throughout the product lifecycle.


Requirements
* Bachelors of Science degree in Aerospace Engineering or other related discipline
* 10+ years of experience
* Thorough understanding of engineering principles and practices
* Fundamental understanding of the principles of strap down navigation, navigation Kalman filter design and absolute/relative navigation system designs and considerations
* Practical hands on experience with flight sensors and associated sensor test and modeling
* Experience developing, testing and certifying navigation algorithms and flight software
* Fluency with MATLAB/Simulink
* Experience defining navigation sensor performance and location requirements including sensor selection
* Experience developing tools to configure and assess performance of navigation sensors and navigation algorithms
* Experience with our Dream Chaser specific vehicle sensor suite
* Experience with ISS relative navigation system designs, considerations and limitations
* Fluency with Linux environments, C++ and Python programming languages
* Knowledge of industry standard system engineering design principles, to include, classical and Model Based System Engineering (MBSE)
* Knowledge of industry standard aerospace principles, to include, but not limited to parametric design and model-based definition
* Experience with flight test and hardware software integration
* Background in the Aerospace and Defense Industry
* The ability to obtain and maintain a Security Clearance

If you are interested in this GNC Engineering job in Lousiville, Colorado please apply via the 'apply now' link provided. Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

 
Job Number: 302781
Job Location: Louisville, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/23/2020
Last Updated: 08/06/2020
Firm Name: BELCAN TECHSERVICES
Attention: BrianVidetic
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/489-4300
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Network Engineer

Description:
USPS Postal Clearance Required Must be a US Citizen or Permanent Resident (Green Card Holder)

We are seeking a Senior Network Engineer. This position is supporting our government contract and is located in Rosslyn, VA. Candidate must be able to pass a pre-screen and obtain a USPS Sensitive clearance. This is an on-site position with no telecommute

This position is supporting our government contract and is located in Rosslyn, VA. Candidate must be able to pass a pre-screen and obtain a USPS Sensitive clearance. This is an on-site position with no telecommute.

Position Description

• Responsibilities include documenting, installing, configuring, troubleshooting and maintaining infrastructure communications hardware and software for USPSOIG network.
• Configuring router and switches for USPSOIG internal data center and satellite sites.
• Monitor, report, troubleshoot and remediate network performance issues.
• Identify diagnoses and resolve network problems.
• Take technical lead of projects for existing USPSOIG network, as well as redesigning network architecture in order to facilitate new business requirements and/or to take advantage of system enhancements.
• Ensure LAN/WAN environment is secure and appropriate resolution to recovery and redundancy issues.
• Planning and ensuring of a reliable high performance environment across all components in the USPSOIG network.
• Leading, designing and implementing strategic and technical approach of projects.
• Work closely with field operation group and other IT staff.
• Lead evaluation, testing, reporting and implementation of current and immerging technologies as appropriate to the mission and priorities of the USPSOIG organization. These may include:
• Integration with Cloud Service Providers (e.g., Azure, AWS, vCloud, etc.)
• Integration with remote data centers

Addiitional Job Details:
Position Requirements Primary Requirements:


• Bachelor’s degree from an accredited college or university in a technical field such as Engineering, Mathematics, Statistics, Computer Science, or related fields. Additional experience may be substituted for degree. •
Candidate will possess at least 8 or more years of specialized experience in routing and switching.
• Candidate will possess at least 6 or more years’ experience serving in the role of senior network administration, dealing with all aspects of installing, configuring and maintaining of enterprise network.
• Ability to lead, plan, organize, implement and direct activities and resources associated with the design, development, installation, and maintenance of enterprise network.
• Demonstrated experience leading a team and being responsible for the success of complex projects with significant IT components
• Demonstrated ability to determine requirements for, and ensure design, development, implementation, and maintenance of enterprise network.
• Must be able to obtain a Position of Public Trust Clearance – US Citizen or Permanent Resident (Green Card Holder), and must not have traveled outside the US for a combined total of 6 months or more in last 5 years.
• Must have resided in the US for the last 5 years Secondary Requirements:
• Ability to work independently, manages small project implementation across the USPSOIG agency or organization, and coordinates project activities with IT staff.
• Ability to communicate effectively both orally and in writing with other IT staff and managers •
Ability to perform duties as assigned and help USPSOIG in obtaining and maintaining its mission
• Local to the Rosslyn, VA area as this position does not provide relocation assistance. Desired Requirements
• Advanced degree or advanced studies in converged telecommunications.
• CCNP or CCNA Certification
• Strong “can-do” attitude, willing to do whatever it takes to successfully accomplish projects
• Demonstrated expertise in troubleshooting complex network
• Prior experience contracting with a government agency
• Excellent Time Management skills
• Proven ability to document network topology, and reflect on changes. Additional Requirements:
• Experience with routing protocols and concepts: BGP, OSPF, EIGRP, VRF, VDC
• Experience with Cisco routers: ASR1002X, 4331 ISR • Experience with Cisco Nexus 7706, Catalyst 6509 VSS, Catalyst 3850 stacks, Nexus 5k & 2k fabric switches, HP switches, Dell switches
• Experience with network switching & protocols: VTP, STP, VLAN, Etherchannel, Port-channel, LACP
• Experience with network monitoring systems and protocols: Solarwinds, Statseeker, SNMP
• Experience with DHCP servers, DNS servers, and IPAM systems: Bluecat
• Experience with enterprise wireless LAN systems and architecture: Cisco 5520 WLC, Aruba 7220 mobility
 
Job Number: x20200138
Job Location: Rosslyn, VA
Rate: $70.33/hr
Input Date: 07/30/2020
Last Updated: 08/03/2020
Firm Name: XPEERANT
Attention: Woody Arnold
Address: 4308 N GARFIELD AVE
City, State: LOVELAND, CO 80538
Phone: 970/282-9287
Website: www.xpeerant.com

Senior Principal RF Test Design Engineer (Secret Clearance)

Description:
PDS Tech Inc. is seeking a Senior Principal RF Test Design Engineer with Secret Clearance in Baltimore / Linthicum Heights, MD.
 
Bachelor’s degree in a technical area with 5 years of experience Designing Fixtures and Automating Lab Instruments
 
Basic Qualifications (Must Meet All):
  • C/C++ Software Programming proficiency
  • Electro-Mechanical Test Fixture Design
  • Familiarity with Lab Test Instruments (scopes, SpecAns, Network Analyzers)

  
  
 
 
  • US Citizen
  • Secret Clearance

 
Job Number: 1910108844
Job Location: Linthicum Heights, MD
Duration: 12 months
Input Date: 11/11/2019
Last Updated: 09/23/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fUChQAM&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Server Engineer - OIG

Description:
Contract Hourly Pay Rate - $82
Perm Salary - $110K /YR

USPS Postal Clearance Required
Must be a US Citizen or Permanent Resident (Green Card Holder)


Northrop Grumman Technology Services sector is seeking a Senior Server Engineer to join our team of qualified, diverse individuals. This position is supporting OIG CIO contract in Rosslyn, VA. Candidate must be able to pass a pre-screen and obtain a USPS Sensitive clearance. This is an on-site position with no telecommute.

Position Description:

• Responsible for the day-to-day operations and maintenance of the agency's server infrastructure.
• Coordinates all maintenance activities including testing and scheduling for maintenance weekends including ensuring that all change records have been approved prior to maintenance events.
• Assures implementation by working with staff on the goals and objectives of agency-wide programs, implements established goals and objectives, assesses measures that evaluate performance, and makes recommendations for program improvement.
• Develops mitigation strategies when vulnerabilities cannot be remediated, coordinates with IT security for review and acts on any directed changes.
• Manages various hardware infrastructure supporting all domain services, server and end point applications.
• Responsible for upgrading and managing all domain services and works with various system owner to coordinate systems upgrades, system backups as well at hardware refreshes.
• Develops and submits change requests and tracks to completion for software upgrades and patches.
• Develops technical architecture documentation that details procedures for installation, maintenance, security, configuration, and disaster recovery.
• Responds to events and incidents with possible security architecture or negative user experience impacts; takes necessary corrective actions promptly
• Plans, organizes, and conducts research on complex infrastructure and client support issues that involve major areas of uncertainty in approach, methodology, or interpretation to identify appropriate solutions.
• Identifies and resolves unique issues where no policy exists, recommending innovative actions to address new needs and/or issues.
• Recommends enterprise upgrades, changes, or enhancements.

Additional Job Details:

Position Requirements:


• MUST have a Bachelor’s degree from an accredited college or university in a technical field such as Engineering, Mathematics, Statistics, Computer Science, or related fields
• 10+ years of specialized IT experience in Windows-focused administration to include Active Directory services and file / print services
• Microsoft certification and VMWare certification
• Extensive knowledge administering and managing Microsoft Windows Server 2012R2, 2016 and 2019, some Linux experience preferred
• Experience with various enterprise hardware, servers, and SAN solutions to support a virtualized private cloud infrastructure
• Deploying and updating VMWare ESX environments, managing storage, networking and other resources within vCenter
• Expert working knowledge of Active Directory, DNS, and Group Policy to manage enterprise environment; able to architect and deploy Active Directory DC design, schema, OU design, AD replication topology, and DC backup/restore procedures
• Direct experience with Microsoft products such as: Data Protection Manager (DPM), Azure backup System Center Configuration Manager (SCCM) and System Center Operations Manager (SCOM).
• Implement backup and data retention strategies in accordance with Office of Investigations (OI) and Office of General Counsel (OGC) guidance and policy as well as develop, plan, and execute disaster recovery exercises
• Experience with PowerShell and other scripting tools
• Perform proactive monitoring of system logs, services, daemons, scripts, and applications on server systems and storage arrays for internal and customer-facing applications
• Secure server systems, storage arrays, forensic workstations, and network infrastructure according to OIG policy and practices
• Handle and maintain confidential, sensitive, and/or law enforcement investigative information and follow non-disclosure requirements
• Demonstrated problem solving skills and a consistent record of on-time delivery and customer service to include project planning, budgeting, scheduling, resource management, effective time management, documentation, and organization skills
• Ability to communicate effectively, both orally and in writing, to express and present ideas clearly and concisely
• Able to work off-hours and weekends as needed for maintenance, upgrades, installations, etc.
• Must be able to obtain a Position of Public Trust Clearance – US Citizen or Permanent Resident (Green Card Holder), and must not have traveled outside the US for a combined total of 6 months or more in last 5 years.
• Must have resided in the US for the last 5 years
 
Job Number: x20190206
Job Location: Rosslyn, VA
Rate: See Job Description
Duration: Temp to Perm
Input Date: 12/04/2019
Last Updated: 08/03/2020
Firm Name: XPEERANT
Attention: Woody Arnold
Address: 4308 N GARFIELD AVE
City, State: LOVELAND, CO 80538
Phone: 970/282-9287
Website: www.xpeerant.com

Senior Technical Publications Analyst

Description:
PDS Tech, Inc. is seeking a Senior Technical Publications Analyst for an open position in Huntsville, AL.
Description:

  • Maintain detailed records of all publication changes and source documentation and be able to provide metrics to management.
  • Host/attend Program Reviews as needed to draft/review content or address comments/concerns.
  • Investigate/reply to customer comments and coordinate with engineering and suppliers to address comments/concerns as necessary.
  • Identify areas of opportunity to improve day to day operations and implement ACE tools that aid on waste elimination and process improvement.

Candidate must have knowledge of US Army UH60 A/L/M and International S-70i and S-70A Publications.
Knowledge of MIL-STDs 40051B, 40051C, 40051-1C and S1000D.
Prefer 10+ years experience on UH/MH/HH-60 or S-70 Black Hawk helicopter as either a mechanic, electrician, or avionics maintainer.
Highly proficient in Extensible Markup Language (XML)

Proficient in the use of at least one of the following Editing Software: ArborText, Ultra-Edit and Notepad++

Knowledge in the use of Sikorsky Proprietary Software: Contenta/XyVision

Knowledge in the use of Desktop Applications: Microsoft Office, Beyond Compare, Adobe Acrobat Pro, IADS-4 and IETMs

Ability to oversee multiple projects of varied size and scope

Effective communications skills (both written and oral)

Highly motivated

Strong organizational skills

Able to think and operate independently



Education: BA/BS Degree in Business Administration or related field esperience, or equivalent.



Experience: Prefer 10+ years’ experience on UH/MH/HH-60 or S-70 Black Hawk helicopter as a maintainer specializing in avionics. 4 to 7 years technical writing experience, XML interpretation and understanding, technical background, ability to read and interpret Engineering wiring diagrams, Engineering structural diagrams, Engineering Change Notices (ECNs), Engineering Change Proposals (ECPs), Publication Change Requests (PCRs), and vendor data to aid in incorporating changes into existing publications and/or authoring new publications and various other technical data related to assigned tasks
 
Job Number: 2010116052
Job Location: Huntsville, AL
Duration: 18 months
Input Date: 07/28/2020
Last Updated: 09/23/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Mike Flanery
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003OwrKQAS&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Simulation & Software Engineer - SIMULINK/PYTHON

Description:
- Proficient with the utilization of Simulink in a real time simulation environment
- Experience with Python for the purposes of creating scripts/tools for automation of tests conducted on a real time simulation platform
- Aircraft system simulation experience
- Integration of aircraft system Simulink models to corresponding real aircraft controller hardware
- Experience interacting/updating/troubleshooting real time simulation platforms (eg ADI, NI, Speedgoat)
- Rectifying lab problem reports issues through troubleshooting, solution development and implementation
- Responsible for satisfying lab customer questions and/or test assistance
- Ability to read aircraft/simulation electrical drawings
- Experience integrating various hardware I/O (analog, discrete, data bus, etc) into a real time simulation platform
- Understanding standard aircraft industry I/O protocols (ARINC 429, 664, 485, 717, etc)
- Troubleshooting lab simulation hardware/software and connected auxiliary test equipment

PLEASE ANSWER THE FOLLOWING TO COMPLETE SUBMITAL PROCESS
1 Are you a us Citizen ?
2 Include updated resume with months and years on dates
3 Do you have any prior military experience (can you produce a DD-214)
4 What is your highest level of completed education ?
5 W2 - Rate request
6 Prior Gulfstream contractor or direct ?
 
Job Number: 5874-GA
Job Location: Savannah, GA
Rate: 70/75hr.
Per Diem: YES
Overtime: Possible
Duration: Contract
Start Date: 2/3 wks from offer
Input Date: 07/08/2020
Last Updated: 07/30/2020
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Simulation & Software Engineers (Req #155052)

Description:
STS Technical Services is hiring Simulation & Software Engineers in Savannah, Georgia.

Position Summary:

Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of our client's products and services.

Job Duties:
Contributes to planning, developing and coordinating of important engineering projects
Provides specialized technical assistance to team members
Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
Determines and develops own approach to solutions within schedule and cost objectives
Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives 
Acts as liaison with representatives outside of the assigned group/area
Actively works to improve daily processes and ensures all work meets customer requirements
Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
Perform other duties as assigned.
Qualifications:
Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
Five (5) ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
Advanced degree in engineering related field preferred
The level of technical skill and abilities appropriate for this grade will be established by each discipline
Unique Skills:
Proficient with the utilization of Simulink in a real time simulation environment
Experience with Python for the purposes of creating scripts/tools for automation of tests conducted on a real time simulation platform
Aircraft system simulation experience
Integration of aircraft system Simulink models to corresponding real aircraft controller hardware
Experience interacting/updating/troubleshooting real time simulation platforms (eg ADI, NI, Speedgoat)
Rectifying lab problem reports issues through troubleshooting, solution development and implementation
Responsible for satisfying lab customer questions and/or test assistance
Ability to read aircraft/simulation electrical drawings
Experience integrating various hardware I/O (analog, discrete, data bus, etc) into a real time simulation platform
Understanding standard aircraft industry I/O protocols (ARINC 429, 664, 485, 717, etc)
Troubleshooting lab simulation hardware/software and connected auxiliary test equipment
About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 35251
Job Location: Savannah, GA
Input Date: 07/16/2020
Last Updated: 07/22/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: Kristi Florentine
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Dev Analyst 5 - Atlassian

Description:
US CITIZEN REQUIRED

***DoD Secret Clearance Preferred***


1 contract labor will work with Atlassian users to develop the system architecture, workflows and pipelines as well as train existing staff in the standup and maintenance of the environment.

The candidate will have a minimum of 5 years of experience in architecting, developing and placing into production the Attlasian/or Cameo suite of tools for large program environments.
 
Job Number: x20190225
Job Location: Redondo Beach, CA
Rate: $80.00/hr
Duration: 6 Months
Input Date: 03/23/2020
Last Updated: 08/03/2020
Firm Name: XPEERANT
Attention: Woody Arnold
Address: 4308 N GARFIELD AVE
City, State: LOVELAND, CO 80538
Phone: 970/282-9287
Website: www.xpeerant.com

Software Developer

Description:
OOP, C++, Linux, scripting language, secret clearance
 
Job Location: Denver, CO
Input Date: 04/17/2017
Firm Name: JOHNSON SERVICE GROUP
Attention: Michael Geil
Address: 1600 AIRPORT FWY STE 400
City, State: BEDFORD, TX 76022-6871
Phone: 817/545-4009
Fax Phone: 817/545-2006
Email: mgeil@jsginc.com
Website: www.jsginc.com

Software Engineer

Description:
1) Software problem reporting, troubleshooting, corrections, and maintenance.
2) Microsoft Windows Desktop and Server, Red Hat Enterprise Linux, LDAP, NFS,
  1. Software Licensing tools and technologies (e.g. Microsoft licensing, FlexLM), IBM Key Lifecycle Management, VMware

3) Programming languages such as C/C++, C#, Java using compilers.  Knowledge of SW Development lifecycle.
4) Support installation, configuration, setup and troubleshooting of applications within a classified lab environment.  Ability to perform code and unit testing.

Deliverables. Supplier shall provide the following deliverable(s):
1) Provide input and development support for reports and documents as required by the Buyer’s Technical Representative
2) Engineering products as requested by the Buyer’s Technical Representative

 
Job Number: 2010115755
Job Location: OK City, OK
Duration: 3 months
Input Date: 07/29/2020
Last Updated: 09/23/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003OvgCQAS&URLSource=cjhunter

Software Engineer 4

Description:
Chipton-Ross is seeking a Software Engineer 4 for an opening in Germantown, MD.

RESPONSIBILITIES:
Leads activities to develop, document and maintain architectures, requirements, algorithms, interfaces and designs for software systems. Leads development of code and integration of complex software components into a fully functional software system. Develops software verification plans, test procedures and test environments, executing the test procedures and documenting test results to ensure software system requirements are met. Provides technical leadership for software projects and leads software supplier management activities. Leads development, selection, tailoring and deployment of processes, tools and metrics. Plans, executes and documents software research and development projects. Serves as a subject matter expert for software domains, system-specific issues, processes and regulations. Tracks and evaluates software team and supplier performance to ensure product and process conformance to project plans and industry standards. Works under minimal direction.

EXPERIENCE:
-imbed software such as C/C++
-have experience writing software to integrate with Board Support Packages (BSPs) for the purpose of bringing up custom hardware

EDUCATION:
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

FULL TIME/FIRST SHIFT
WORK HOURS: 8:00 AM - 5:00 PM



 
Job Number: 185668
Job Location: Germantown, MD
Rate: $DOE
Duration: 12 Months
Input Date: 04/28/2020
Last Updated: 09/23/2020
Firm Name: CHIPTON ROSS
Attention: Max Cameron
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: mcameron@chiptonross.com
Website: www.chiptonross.com

Software Engineer/JAVA/UNIX - Oklahoma City OK

Description:
Software Engineer

Additional Job Details:
Required Skills:
• Software development and integration experience
• Strong technical development, integration, and problem solving skills
• Experience integrating software on large, complex systems
• Good written and verbal communication skills
• Proficiency with the Java programming language

U.S. Citizenship status is required as this position requires the ability to obtain a Secret U.S. Security Clearance within one year of start date

Desired Skills:
• Experience with multiple domains including radar, EO/IR, COMINT/SIGINT, and/or communications
• Experience integrating third party software
• Experience with UNIX system administration and shell scripting • Experience with virtualization technologies such as VMWare
 
Job Number: R5689OK
Job Location: Oklahoma City, OK
Rate: OPEN RATE
Per Diem: YES
Overtime: Possible
Duration: 12 Months
Start Date: 2/3 wks from offer
Input Date: 06/24/2020
Last Updated: 09/23/2020
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: davellino@advancedtechno.com
Website: www.advancedtechno.com

Software Engineers -- Many new long term programs in Missouri

Description:
Ada, C++; avionics a plus

PDS Tech - #1 Aerospace supplier in Missouri
 
Job Location: Missouri
Input Date: 02/12/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy or Ken Brownsher
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Email: mmccarthy@pdstech.com; kbrownsher@pdstech.com
Website: www.pdstech.com

Software Requirement Tester

Description:
Chipton Ross is seeking a Software Requirement Tester in McLean, VA,

RESPONSIBILITIES:
Northrop Grumman Technology Services sector is seeking a software requirement tester to join our team of qualified, diverse individuals.

The qualified applicant will be working with Northrop Grumman's MedDRA MSSO (Maintenance and Support Services Organization), which is a 21-year program that maintains a medical terminology used globally by health authorities and the biopharmaceutical industry.

MedDRA (Medical Dictionary for Regulatory Activities) is a medical terminology used to classify adverse event information associated with the use of biopharmaceuticals and other medical products (e.g., medical devices and vaccines). The MSSO serves as the repository, maintainer, and distributor of MedDRA as well as the source for the most up-to-date information regarding MedDRA. The MSSO is seeking a software requirements developer and tester to interface between systems analysts/programmers and users to ensure that information technology designs meet the needs of the end users for the applications in use by the MedDRA project.


Roles and Responsibilities:
Learn and understand the MSSO business process and how the developed software applications and their functions intersect with business objectives
Develop test procedures to ensure user software requirements are carried out
Conduct and document application tests
Coordinate results of tests to ensure identified issues are captured and addressed
Work with the IT manager and application requirement specialist to ensure that requirements development, tests and other related activities are performed per schedule
Assist with developing or editing other technical documentation such as user guides, software development procedures, specification documents or other related documents for use on the project
When needed, act as a liaison between the application subject matter experts and the software developers to represent user interests
When requested, document application requirements with application stakeholders


REQUIRED EXPERIENCE:
To be considered for this position, you must minimally meet the knowledge, skills, and abilities listed below:
Bachelors Degree and 3 years experience as a software requirement developer and tester or a total of 7 years of relevant experience
Experience testing requirements for a variety of internal and externally used applications
Experience working with application stakeholders to develop test scripts and related documentation

Preferred Qualifications: Candidates with these desired skills will be given preferential consideration:
Experience with requirements testing of workflow and invoicing systems
Experience with developing or updating technical documentation
Basic understanding of software development practices and approaches
Knowledge of basic information security practices to aid in testing or requirements development

EDUCATION:
Bachelor's Degree
School must be accredited.

HOURS:
5/40 workweek
8:00am to 5:00pm

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.



 
Job Number: 186419
Job Location: McLean, VA
Rate: $24.9 to $41.50 DOE
Duration: 1 year
Input Date: 07/08/2020
Last Updated: 09/23/2020
Firm Name: CHIPTON ROSS
Attention: Max Cameron
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: mcameron@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Requirement Tester

Description:
The qualified applicant will be working with Northrop Grumman's MedDRA MSSO (Maintenance and Support Services Organization), which is a 21-year program that maintains a medical terminology used globally by health authorities and the biopharmaceutical industry.

MedDRA (Medical Dictionary for Regulatory Activities) is a medical terminology used to classify adverse event information associated with the use of biopharmaceuticals and other medical products (e.g., medical devices and vaccines). The MSSO serves as the repository, maintainer, and distributor of MedDRA as well as the source for the most up-to-date information regarding MedDRA. The MSSO is seeking a software requirements developer and tester to interface between systems analysts/programmers and users to ensure that information technology designs meet the needs of the end users for the applications in use by the MedDRA project.


Roles and Responsibilities:

• Learn and understand the MSSO business process and how the developed software applications and their functions intersect with business objectives
• Develop test procedures to ensure user software requirements are carried out
• Conduct and document application tests
• Coordinate results of tests to ensure identified issues are captured and addressed
• Work with the IT manager and application requirement specialist to ensure that requirements development, tests and other related activities are performed per schedule
• Assist with developing or editing other technical documentation such as user guides, software development procedures, specification documents or other related documents for use on the project
• When needed, act as a liaison between the application subject matter experts and the software developers to represent user interests
• When requested, document application requirements with application stakeholders

Additional Job Details:

Basic Qualifications:

To be considered for this position, you must minimally meet the knowledge, skills, and abilities listed below:
• Bachelor’s Degree and 3 years’ experience as a software requirement developer and tester or a total of 7 years of relevant experience
• Experience testing requirements for a variety of internal and externally used applications
• Experience working with application stakeholders to develop test scripts and related documentation
• Must be a Green Card Holder or a US Citizen Preferred Qualifications: Candidates with these desired skills will be given preferential consideration:
• Experience with requirements testing of workflow and invoicing systems
• Experience with developing or updating technical documentation
• Basic understanding of software development practices and approaches
• Knowledge of basic information security practices to aid in testing or requirements development
 
Job Number: x20200122
Job Location: McLean, VA
Rate: $42.65/hr
Duration: 12 Months
Input Date: 07/08/2020
Last Updated: 08/03/2020
Firm Name: XPEERANT
Attention: Woody Arnold
Address: 4308 N GARFIELD AVE
City, State: LOVELAND, CO 80538
Phone: 970/282-9287
Website: www.xpeerant.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Testers

Description:
**Must have Active Secret Clearance
* The testing will be focused on mission subsystems functions (e.g., mission computing system, radar, IFF, ESM, Comm and Data Links).

* Conduct software test activities in the classified Software Integration Lab (ASIL).
Tasks shall include:
* Review, development and finalization of software test procedures.
* Conducting software test dry runs and run for score tasks.
* Completing software test memos, writing work orders, validating work orders, writing test memos and test reports as needed.

Email resume to: mmccarthy@pdstech.com
 
Job Number: Bo-Soft Tester
Job Location: Oklahoma City, OK
Rate: $70.00-$80.00/hour
Per Diem: Possible
Overtime: Possible
Duration: Long Term
Start Date: ASAP
Input Date: 07/24/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Validation & Verification Engineer

Description:
Software Validation & Verification Engineer

Location: Fort Worth, TX



Responsibilities:

Support the development of embedded software, unit testing, and verification artifacts to support DO-178C certification.
Candidate shall possess an active Department of the Defense SECRET clearance (investigation within 5 years is required to start).
Experience with agile software development process (daily scrums and bi-weekly sprints).
Experience with Visual Studio 2015, JIRA, Confluence, GIT and Bitbucket.
Experience with C++ using an object-oriented design. Includes all phases of safety-critical software development, from initial design, development, and demonstration to final documentation, integration, and testing.
Candidate will develop structural coverage analysis for Requirements Based Test (RBT) qualification testing in compliance with DO-178C DAL B.
Candidate shall deliver structural coverage analysis for the Requirements Based Test (RBT) in compliance with DO-178C DAL B for the entire Flight Control Software suite.
Candidate shall deliver a plan to develop embedded software and achieve DO-178C DAL B compliance for the Line Replaceable Unit (LRU).
Candidate shall develop and maintain the following documents:
Plan to develop software that meets DO-178C DAL B
SRS (Software Requirements Spec)
SDD (Software Design Document)
STD (Software Test Description)
Unit Tests and results
Structural Coverage and Analysis






____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 59241
Job Location: Fort Worth, TX
Per Diem: Possible
Start Date: ASAP
Input Date: 07/23/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: David Surreira
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software requirement development specialist

Description:
The qualified applicant will be working with Northrop Grumman's MedDRA MSSO (Maintenance and Support Services Organization), which is a 21-year program that maintains a medical terminology used globally by health authorities and the biopharmaceutical industry.

MedDRA (Medical Dictionary for Regulatory Activities) is a medical terminology used to classify adverse event information associated with the use of biopharmaceuticals and other medical products (e.g., medical devices and vaccines). The MSSO serves as the repository, maintainer, and distributor of MedDRA as well as the source for the most up-to-date information regarding MedDRA. The MSSO is seeking a software requirements developer to interface between systems analysts/programmers and users to ensure that information technology designs meet the needs of the end users for the applications in use by the MedDRA project.


Roles and Responsibilities:

• Learn and understand the MSSO business process and how the developed software applications and their functions intersect with business objectives
• Act as a liaison between the application subject matter experts and the software developers to represent user interests
• Document application requirements with application stakeholders
• Work with software developers, testers and other stakeholders to explain requirements
• When needed, develop test procedures to ensure user requests are carried out
• When needed, conduct and document application tests
• Coordinate results of tests to ensure identified issues are captured and addressed
• Work with the IT manager to ensure that requirements development, tests and other related activities are performed per schedule
• Assist with developing or editing other technical documentation such as user guides, software development procedures, specification documents or other related documents for use on the project


Addition Job Details:

Basic Qualifications:


To be considered for this position, you must minimally meet the knowledge, skills, and abilities listed below:
• Bachelor’s Degree and 6 years’ experience as a software requirements developer or a total of 10 years of relevant experience
• Experience developing requirements for a variety of internal and externally used applications
•Experience working with application stakeholders to develop requirements, test scripts and related documentation
• Must be a Green Card Holder or a US Citizen Preferred Qualifications: Candidates with these desired skills will be given preferential consideration:
• Experience with requirements development of workflow and invoicing systems
• Experience with developing or updating technical documentation • Basic understanding of software development practices and approaches
• Knowledge of basic information security practices to aid in requirements development
 
Job Number: x20200121
Job Location: McLean, VA
Rate: $53.31/hr
Duration: 12 Months
Input Date: 07/08/2020
Last Updated: 08/03/2020
Firm Name: XPEERANT
Attention: Woody Arnold
Address: 4308 N GARFIELD AVE
City, State: LOVELAND, CO 80538
Phone: 970/282-9287
Website: www.xpeerant.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Advanced Architect Engineer - Undersea Cable Systems

Description:
A Sr. Advanced Architect Engineer - Undersea Cable Systems job in McLeansville, NC is currently available through Belcan. In this role, you will be responsible for designing, developing, building and testing systems and products based on optic, photonic and laser technologies. To be considered for this role, you will have a Bachelor Degree in Optical Engineering, Optical Science and Engineering, Physics, or Electrical Engineer plus a minimum of 8 years of relevant experience. A current active Department of Defense Secret security clearance is required at the time of hire.

Sr. Advanced Architect Engineer - Undersea Cable Systems Job duties:

* Interact with device, hardware and software design teams to assist in overall development of optical systems which includes: specifying, selecting and qualifying active and passive optical components, developing and benchmarking system performance models, developing and implementing test procedures and/or evaluating and selecting appropriate test instrumentation.
* Recommend technological modifications to the development of new undersea photonic products and/or design changes that improve performance of existing products.
* Participates in electrical and optical requirements analysis, requirements definition, requirements management, functional analysis, performance analysis (e.g. optical loss, timing, power, etc.), design, integration, and verification of electrical and optical components, equipment and systems.
* Perform root cause analysis for electrical and optical issues, conduct experimental tests, evaluate results to formulate and implement solutions to issues.
* Expected to lead small technical proposals and contribute on medium to large proposals, as a technical writer or basis of estimate author.

Qualifications:

* Familiarity with high-speed transport, including SONET/SDH, GFP, and OTN, at rates up to 10 Gbps at a minimum with experience with higher rates (100G) preferred.
* Direct experience with commercial multiplexing, routing, and switching hardware and routing protocols.
* Familiarity with DWDM transport systems (metro, unrepeatered, or long-haul), and design and impairment analysis of such systems.
* Candidate should have experience in developing requirements and specifications, demonstrated leadership in an integrated team environment and excellent verbal and writing skills.

If you are interested in this Sr. Advanced Architect Engineer - Undersea Cable Systems job in McLeansville, NC, please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

 
Job Number: 302573
Job Location: Mc Leansville, NC
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 06/20/2020
Last Updated: 08/13/2020
Firm Name: BELCAN TECHSERVICES
Attention: DerrickHart
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/489-4300
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Advanced Software Engineer

Description:
A Sr. Advanced Software Engineer job in Oakton, VA is currently available through Belcan. In this role, you will be responsible for performing software requirements analysis, lead research and design, and develop and test software and tools. To be considered for this role, you will have a Bachelors Degree in Software Engineering, or a related specialized area or field, plus a minimum of 8 years of relevant experience. A current active Department of Defense Secret security clearance is required at the time of hire.

Sr. Advanced Software Engineer Job duties:

* Participate in the development and operation of a state-of-the-art custom-built Big Data system and join a long-lived, stable program consisting of a team of exceptional high-quality individuals using defined Agile software principles and practices.
* Invent new products or enhance existing applications.
* High performance parallel computing, using multi-threaded programming techniques.
* Proficient understanding of software engineering concepts, principles, and theories.

Qualifications:

* Experience with full-stack web development, various scripting languages such as Ruby or Python, and modern C++, in a Linux environment.
* Web Framework development experience - Ruby on Rails (preferred), Django, Express, etc..
* JavaScript MVC experience - React/Redux (preferred), Angular, Vue, Ember.
* Understanding of object-oriented programming, design patterns, data structures, algorithms, CPU issues, I/O issues, and bottlenecks.
* Automated testing experience.

If you are interested in this Sr. Advanced Software Engineer job in Oakton, VA, please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

 
Job Number: 303225
Job Location: Oakton, VA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/29/2020
Last Updated: 08/13/2020
Firm Name: BELCAN TECHSERVICES
Attention: DerrickHart
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/489-4300
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. System Administrator

Description:
A Sr. System Administrator job in Fairfax, VA is currently available through Belcan. In this role, you will be responsible for serving as a front-line interface to users with technical issues and conducting systems analysis and development to keep systems current with changing technologies. To be considered for this role, you will have a Bachelor's degree in Computer Science, or a related specialized area or field, plus a minimum of 8 years of relevant experience. A current active Department of Defense Secret security clearance is required at the time of hire.

Sr. System Administrator Job duties:

* Responsible for the day-to-day support of server services by performing server administration for physical and virtual server operating systems and configuring, maintaining and troubleshooting of physical and virtual hardware and network related interfaces on servers.
* Install new software, troubleshooting, granting permissions to applications and training users.
* Perform, maintain, troubleshoot and conduct a complete analysis of alerts.
* Create scripts to automate repetitive processes.
* Work with customers to identify, isolate, and resolve problems with servers that are affecting other services.

Qualifications:

* Advanced understanding of server based operating systems.
* Enhanced troubleshooting skills within the server OS as well as both networking and storage technologies.
* Hands-on experience developing, deploying and supporting large-scale enterprise server solutions.
* Subject matter expert (SME) with the ability to mentor others on administrating the server environment.

If you are interested in this Sr. System Administrator job in Fairfax, VA, please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

 
Job Number: 302400
Job Location: Fairfax, VA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/22/2020
Last Updated: 08/03/2020
Firm Name: BELCAN TECHSERVICES
Attention: DerrickHart
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/489-4300
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

Staff Systems Engineer

Description:
PDS Tech is seeking a Staff Systems Engineer in Linthicum Heights, MD

This position requires a senior technical leader that can act independently, requiring little oversight. Typical activities will include:
  • Developing MS&A strategy and implementation plans (including Model-Based Engineering development and execution)
  • Supporting the MS&A Department to consulting on key programs throughout the company and support customer and industry briefings
  • Employee mentoring and career development in the area of MS&A
  • Ensuring adherence to standard systems engineering and MS&A processes


  • Strategic proposal support
  • Team leadership activities in support of the above pursuits

Basic Qualifications:
 
  • Bachelor’s degree in Science, Technology, Engineering or Math (STEM)
  • Experience: 14+ Years with Bachelors in Science; 12+ Years with Masters; 9+ Years with PhD
  • Demonstrated technical expertise in the areas of modeling, simulation, and analysis
  • Strong communication skills
  • High proficiency in technical problem solving, to include decomposition, root cause analysis, solution development, implementation, and monitoring
  • Working knowledge of C++, Python, and/or MATLAB
  • U.S. Citizenship and active secret clearance is required.


Preferred Qualifications:
 
  • Active TS/SCI with counterintelligence polygraph
  • Experience in formal statistical Design of Experiments (DOE)
  • Familiarization with MIL-STD-3022
  • Simulation/Software design and development experience
  • Descriptive modeling with UPDM, SysML, and/or UML
  • Architecture Framework experience using UAF, DoDAF, Zachman, and/or FEA
  • Campaign, Mission, and Engagement Analysis experience
  • Cost estimation and analysis experience
  • Degree or certification in systems engineering



 
 
Job Number: 1910104844
Job Location: Linthicum Heights, MD
Duration: 6 months
Input Date: 07/16/2020
Last Updated: 09/23/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Adam Scott
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: cecjdallasav@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GUy6QAG&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Strength Engineer

Description:
Strength Engineer

Job ID # 2020-11554

Contract Opportunity

Location: Denver, CO

Industry: Aerospace & Defense

Minimum Education: Bachelor’s Degree

Minimum Experience: 6 Years

 

What You’ll Do:

Perform system and subsystem integration ensuring that subsystems function together as an integrated system.
Bring together discrete systems utilizing a variety of methods including systems engineering, technical risk assessments, technical planning, verification and validation, and supportability and effectiveness analyses of total systems throughout the system lifecycle.
Analyze are performed at all levels of total system product to include concept, design, fabrication, test, installation, certification, operation, maintenance, and disposal.
Perform functional analysis, timeline analysis, detailed trade studies, requirements allocation, and interface definition studies to translate customer requirements into hardware and software specifications.
May lead cross-functional teams and play a critical role in process and tool development, execution, and continuous improvement.
What You’ll Need:

Mandatory experience:
Experience with Word, Excel and PowerPoint to include the integration of charts for presentations
Ability to evaluate interface document and performance compliance
Understanding of the requirements development and verification process.
Good written and communication skills
Ability to take initial direction and work independently to complete tasks
Preferred experience:
Organization skills necessary to maintain focus and achieve consensus within the diverse multi-disciplined teams
Previous internship/work experience in an Aerospace company
Basic understanding of systems engineering principles
Basic understanding of launch vehicle systems
Experience developing, integrating, and verifying launch vehicle or space vehicle specifications and requirements
Experience with NASA programs and customer interfaces
Self-motivated with demonstrated initiative, teamwork and leadership skills on previous technical projects
Ability to operate independently and work as part of a team
 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.



Education & Experience:

Bachelor Degree of Science in Engineering, Applied Math or physics combined with 6 + years of relevant work experience.
 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

 
 
Job Number: Job ID # 2020-11554
Job Location: Denver, CO
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 12 Months
Input Date: 07/28/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineer – Long term, direct hire

Description:
Andromeda Systems Incorporated (ASI) has opportunities for experienced aircraft structural engineers capable of detailed stress analysis to support US DoD projects. Some of these positions are located in the Jacksonville, FL area. Other positions are open to remote workers within the continental US.

Engineers at ASI work in a great environment which includes:
• Compressed and flexible work schedules
• Ability to work from home
• Diverse projects supporting multiple platforms
• Fantastic co-workers and customers
• Hands-on assignments that don’t happen behind a desk

Some of the advantages of working with ASI in Jacksonville include:
• Low cost of housing
• No state income tax
• Great area schools (St. John’s County)
• Miles of sunny beaches

To Apply:
Visit https://androsysinc.com/careers/ to complete an application. Or use the contact email to submit your resume.

Responsibilities:
• Review/perform analyses with hand calculations using OEM & DoD stress methods and industry standards
• Initiate complex repairs and prepare static strength/fatigue analysis of engineering repair dispositions for nonconforming aircraft structure
• Manage project components including establishing task priorities, scheduling and tracking work assignments, providing guidance, and ensuring the availability of resources
• Implement creativity and flexibility in daily activities by relying on experience and judgement to plan and accomplish goals
• Use Finite Element Software pre and post processors such as Nastran/Patran and Femap
• Develop reports that demonstrate designs satisfy all relevant design requirements
• Provide oversight and technical direction to less experienced engineers

Required Qualifications:
• 5+ years of work experience in airframe analysis
• Bachelor’s or master’s Degree in Engineering
o Mechanical or Aerospace preferred
• Ability to work independently and self-motivate
• Usable knowledge of aircraft static strength analysis methods, finite element analysis, and strain life fatigue methods
• Knowledge of maintenance and repair practices used in the aerospace industry
• Strong communication and interpersonal skills

Preferred Qualifications:
• 10+ years of experience in Stress
• Experience with NAVAIR or Air Force engineering and reporting procedures
• Familiarity with Femap, Patran/Nastran, or similar FEA software

Work Authorization/Security Clearance:
• Must be a U.S. Citizen and qualify for Secret Clearance
 
Job Number: 601
Job Location: Orange Park, FL
Rate: DOE
Per Diem: No
Overtime: Available
Duration: Long Term
Start Date: Available Now
Input Date: 07/27/2020
Firm Name: ANDROMEDA SYSTEMS INC
Attention: Stephanie Danti
Address: 330 CROSSING BLVD
City, State: ORANGE PARK, FL 32073
Phone: 904/402-8673
Website: www.androsysinc.com

Structural Design Engineer

Description:
PDS Tech is seeking a Structural Design Engineer in St. Louis, MO  
An active Secret Clearance is required.  Flexible and part-time schedules will be considered.

Currently reviewing and collecting resumes for anticipated upcoming needs. 

Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 2010113357
Job Location: Hazelwood, MO
Duration: 12 months
Input Date: 03/20/2020
Last Updated: 09/23/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002frFRQAY&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer - CPD Or Fibersim Experience Required

Description:
Description
Develops CATIA 3D models, CPD definition, and 2D engineering definition for detail parts, assemblies, and installations
Establishes manufacturing tolerances for production of structural components
Develops and documents requirements and interface constraints for components
Coordinates with the structural substantiation department to ensure component performance in flight environments
Supports test definition to verify that components and manufacturing processes meet design intent and engineering requirements
Participates in the review, approval, and release process of engineering definition
Supports creation and review of manufacturing plans to ensure compliance with design requirements and company processes
Supports components throughout full lifecycle from prototype to final acceptance as well as modifications and repairs after installation
Uses engineering judgment to evaluate manufacturing issues and disposition nonconformance reports (NCR)


Qualifications
Bachelor’s degree from an accredited institution, with a concentration in Aeronautical, Astronautical, Aerospace, or Mechanical Engineering
3 years or more experience in structural design engineering for aerospace composite fabrication and assembly processes
Proficient with CATIA V5
Experience with Composite Part Design (CPD), or Fibersim. Assembly Design, Sketcher, Drafting, Wireframe, Surface Design
Experience with Generative Shape Design (GSD), GD&T and ASME Y14.5M-1994 drafting standards
Knowledge of manufacturing methods for various materials (composite layup, metal machining, 3D printing, bonded assembly, mechanical assembly)
Experience designing for aerospace environments
Experience in the development of human spaceflight hardware desired
Experience with Product Lifecycle Management (PLM) software and configuration management processes
Excellent analytical and decision-making skills
Excellent verbal and written communication skills. Excellent organizational and time-management skills Strong team player.
Proficient in Microsoft Office: Word, Excel, PowerPoint, Outlook

The Structures Company is an AA/EOE.
 
Job Number: 265
Job Location: Mojave, CA
Rate: $65-$70/Hr. **DOE**
Per Diem: Yes
Overtime: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 08/31/2020
Last Updated: 09/22/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Tech Designer

Description:
A Structural Tech Designer job in Kent, WA is currently available through Belcan. In this role, you will be responsible to create drawings for and assist with the design of launch vehicle airframe structures and systems. This position will directly impact the history of space exploration and will require your dedicated commitment and detailed attention towards safe and repeatable spaceflight. Due to the nature of work performed, you must be a U.S. Citizen or Permanent Resident.


Structural Tech Designer Job duties:

* Design and maintenance of structural product definition by preparing design layouts and drawings, modifying existing designs and resolving design discrepancies
* Experience with Design for Manufacturing and Design for Assembly
* Application of relevant company, industry (design, drafting, parts) techniques to plan, lay-out, and maintain data depicting engineering designs (detail, assembly and installation drawings or datasets)
* Implementation of engineering and manufacturing best practices to achieve a balanced approach to cost, schedule and performance requirements
* Support existing standards for product structure naming and organization
* Self-directed for prioritizing and scheduling work activity in support of team
* Assist in the development and deployment of reasonable standards for drafting. Act as single point drafting standards checker for the team.

Qualifications:

* 10+ years of recent experience designing/drafting aerospace, automotive structure's parts, components, or subsystems, utilizing Creo software
* Drafting and designing metallic aerospace components
* Ergonomic and human factors analysis
* Designing for manufacturing and assembly
* Launch vehicle or spacecraft structural systems experience
* Experience with a PDM version control database
* Strong mechanical design and integration skills using Creo.
* Experience designing and drafting composite parts and assemblies
* Experience managing large CAD assemblies and associated drawings
* Experience with ASME Y14.100, Y14.5, Y14.41
* Familiar with existing applicable drafting standards



If you are interested in this Structural Analyst job in Kent, WA, please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.
 
Job Number: 303430
Job Location: Kent, WA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/31/2020
Last Updated: 08/17/2020
Firm Name: BELCAN TECHSERVICES
Attention: DerrickHart
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/489-4300
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
Systems Engineer

Job ID # 2020-11553

Contract Opportunity

Location: Denver, CO

Industry: Aerospace & Defense

Minimum Education: Bachelors Degree

Minimum Experience: 6 Years

 

What You’ll Do:

Perform system and subsystem integration ensuring that subsystems function together as an integrated system.
Bring together discrete systems utilizing a variety of methods including systems engineering, technical risk assessments, technical planning, verification and validation, and supportability and effectiveness analyses of total systems throughout the system lifecycle.
Analyze are performed at all levels of total system product to include concept, design, fabrication, test, installation, certification, operation, maintenance, and disposal.
Perform functional analysis, timeline analysis, detailed trade studies, requirements allocation, and interface definition studies to translate customer requirements into hardware and software specifications.
May lead cross-functional teams and play a critical role in process and tool development, execution, and continuous improvement.
What You’ll Need:

Mandatory experience:
Experience with Word, Excel and PowerPoint to include the integration of charts for presentations
Ability to evaluate interface document and performance compliance
Understanding of the requirements development and verification process.
Good written and communication skills
Ability to take initial direction and work independently to complete tasks
Preferred experience:
Organization skills necessary to maintain focus and achieve consensus within the diverse multi-disciplined teams
Previous internship/work experience in an Aerospace company
Basic understanding of systems engineering principles
Basic understanding of launch vehicle systems
Experience developing, integrating, and verifying launch vehicle or space vehicle specifications and requirements
Experience with NASA programs and customer interfaces
Self-motivated with demonstrated initiative, teamwork and leadership skills on previous technical projects
Ability to operate independently and work as part of a team
 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.



Education & Experience:

Bachelor Degree of Science in Engineering, Applied Math or physics combined with 6 + years of relevant work experience.
 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/
 
Job Number: Job ID # 2020-11553
Job Location: Denver, CO
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 12 Months
Input Date: 07/28/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com