Job Search Results

497 listings were found that matched your search words: Keywords: Electrical ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2019/10/17 Thursday 03:38PM Pacific Time by ContractJobHunter. )

Listings 1 - 497

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Mechanics

Description:
STS Technical Services is Hiring A&P Mechanics in Alcoa, Tennessee!

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-800-359-4787.

Job Summary:
Airframe & Powerplant technicians are certified and licensed by the Federal Aviation Administration to perform maintenance, scheduled and unscheduled on airframes and engines on aircraft registered in the United States of America

Job Duties:
Examine replacement aircraft parts for defects
Diagnose mechanical or electrical problems
Read and understand maintenance manuals and other technical documents and identify repair procedures
Repair wings, brakes, electrical systems and other aircraft components
Replace defective parts using approved tooling
Test aircraft parts with proper diagnostic equipment
Inspect complete work for compliance and performance standards
Review and research aircraft records
Interpret flight test data to diagnose malfunction and performance problems
Assemble aircraft components, perform required measurement and testing
Install system software and databases
Qualifications:
Possess FAA Airframe, Power plant. or airframe and Power plant Certificate or equivalent work experience (Repairman Certificate eligible)
2 years’ experience on General aviation or Corporate aircraft required.
Cirrus SR2X Experience/Factory Training a plus
Aircraft paint and refinishing experience a plus
Knowledge of Federal Aviation Administration Regulations
FAA Airframe, Power Plant or Airframe and Power Plant Certificate
About STS Technical Services:
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 44185
Job Location: Aloca, TN
Input Date: 08/12/2019
Firm Name: STS AEROSTAFF SERVICES
Attention: STS Technical Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
Location: Fort Worth, TX
Rate: $71.14/HR
Duration: 10 month contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****

Job Description:
- Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design.
- Verify the aero source tool will support shop floor, flight line, and off-site aircraft build and operations.
- Will support validation that aero source will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations.
- Will work production floor support from receipt of problem, coordination of answer to release of engineering change.
- Design, develop, and test a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight.
- Establishes structural specifications, performs stress analysis, and conducts performance tests.

Education / Experience:
- Level 4: BS+16 YRS or MS+14 YRS
- Prior F-16 design experience is desired but, not required.
- Past work experience using CATIA V4 and F-16 EBOM system (MPRSII) is highly desired.
- Design experience sought after covers systems installation and equipment installation however, airframe design experience (primary and secondary structure) is also acceptable.
- Past F-22 design experience is desired.
 
Job Number: 10788
Job Location: Fort Worth, TX
Rate: $71.14/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 10 mos
Start Date: ASAP
Input Date: 10/10/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Aerospace Engineer - Air Systems

Description:
  1. Support Flight Testing Activities, including but not limited to:
    1. Discuss and review test plans and preparation activities.
    2. Help determine test specifications (based upon system architecture).
    3. Attend Ground/Flight Test briefing and debriefings
    4. Participate in Test Readiness Reviews and ensure on-time Engineering deliverables.
    5. Generate developmental engineering drawings and instrumentation change requests as required.
    6. Monitor live flight data, typically via telemetry, during flight test on aircraft.
    7. Create and review Aircraft Restrictions
    8. Create and review Aircraft Troubleshootings
    9. Create, review and approve ground test procedures, flight test procedures and their corresponding test reports.
    10. Coordinate with suppliers to review technical data, certification requirements and troubleshoot any issues with supplies.
    11. Process, analyze, and draw conclusions from post flight data.
    12. Identify non-conformances, quality escapes, etc. to create rejection tags.
    13. Make assessments to ensure safety of flight determination.
    14. Document flight test design problems for long term fix.
    15. Generate and review appropriate limitations documentation.
    16. Write flight test results reports.

  2. Complete special projects and tasks assigned by Group Lead.

  • Level Requirements (Minimum):
    Education
     
  • Four (4) year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation). 
    • Other Engineering fields may be considered.

  • Experience
     
  • Four (4) years aerospace engineering experience in air systems, including experience in aircraft cabin temperature controls, low pressure cabin air distribution, avionics cooling, cabin pressurization, fire protection and anti-ice systems.



Knowledge/Skills/Abilities:
 
  • Strong knowledge of flight test operations and flight certification, including knowledge of aircraft cabin temperature controls, low pressure cabin air distribution, avionics cooling, cabin pressurization, fire protection and anti-ice systems.
  • Good leadership presence as well as people management skills: 
    • Future-oriented in thinking and operation.
    • Able to lead by example and live/work by company values.
    • Ability to successfully contribute to a positive and productive work environment.
    • Able to instill a sense of urgency in team members.
    • Able to be patient and objective in difficult situations with different types of people.

  • Strong skill set for: 
    • Professional mannerisms, appearance and actions (self-confident and committed to high ethics).
    • Strong follow-through, quick thinking and resourceful.
    • Ability to remain calm, cool and collected in stressful situations.
    • Strong sense of urgency to resolve the issue.

  • Strong organizational, time management and prioritization skills:
    • Able to multi-task, maintain focus on several different projects at one time and hit deadlines.
    • Able to be flexible with attention and priority.
    • Ability to work in a progressive, fast-paced environment (work well under pressure).

  • Strong analytical skills, with an ability to troubleshoot, problem-solve and effectively and efficiently make decisions.
  • Strong communication skills (oral, written, presentation) with both external and internal team.
    • Act as an active listener, seeking to understand and then to be understood, articulating clearly and confidently.
    • Uses people relationship and business management skills to make decisions on what and when to communicate with employees and customers.
    • Excels at communicating clearly and effectively verbally. Strong proficiency in writing summaries, documents, reports, and presentations.
    • Strong interpersonal skills, with the ability to build strong relationships at all levels. Ability to influence others as well as relate to individuals at all levels of the organization.
    • Good project management skills, including the ability to take ownership for accomplishing assigned tasks. Results-oriented planner and delegator who ensures that goals are met. Able to set priorities and keep to projected schedules.
    • Computer Skills: Comfortable and effective working in Microsoft Office. Intermediate Excel proficiency required. Able to quickly learn new software and systems. 
    • Proven track record of improving the efficiency of assigned processes or procedures.
       
       


 
Job Number: 1810087672
Job Location: Seattle, WA
Duration: 6 months
Input Date: 06/27/2018
Last Updated: 10/17/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mYpuAAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Ground Support Equipment Technicians

Description:
STS Technical Services is hiring Aircraft Ground Support Equipment Technicians in Denver, Colorado.

Qualifications:
Minimum three (3) years of experience in the equipment repair industry.
Previous ground support equipment is preferred
Strong knowledge of Diesel Engines, Electrical systems, Hydraulics, Generators.
Computer literate.
Must furnish own hand tools.
Ability to attain Airport issued ID badge
High school diploma or G.E.D Degree in Automotive, Diesel mechanics preferred
Valid Driver’s License
Vocational training certificate or equivalent in work experience
Benefits:
STS Technical Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-800-359-4787.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 48247
Job Location: Denver, CO
Input Date: 08/12/2019
Firm Name: STS AEROSTAFF SERVICES
Attention: STS Technical Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Aircraft Mechanic I - Clearance KY

Description:
16537 Job Title: SCA Aircraft Mechanic I
Work Site Address: Lexington, KY 40516
Job Number: 1746-1
Max Pay Rate: $30.29/hr
Start Date: 7/15/2019
End Date: 10/13/2019
Position Type: Contract

• Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company.

Job Summary:
The Aircraft Mechanic I (Electrical)troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems. This mechanic repairs, replaces, and rebuilds aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and equipment such as shears, sheet metal brake, welding equipment, rivet gun, and drills. This worker reads and interprets manufacturers' and airline's maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. This mechanic performs 100-hour, progressive, isochronal, phase, periodic, and other hourly or calendar inspections, examines reciprocating engines for cracked cylinders and oil leaks, and listens to operating engine to detect and diagnose malfunctions, such as sticking or burnt valves, inspects jet engines and components for cracks, corrosion, foreign object damage, burned areas, distortions, security, warping, wear, and missing segments. Inspects jet engine turbine blades to detect cracks, distortion, corrosion, burn-out, security, or breaks, tests engine operation, using testing equipment, such as ignition analyzer, compression checker, distributor timer, ammeter, and jet calibration (Jetcal) tester, to locate source of malfunction. Work involves: replacing or repairing worn or damaged components, such as carburetors, alternators, magnetos, fuel controls, fuel pumps, oil pumps, and engine mounted gearboxes, and compressor bleed valves using hand tools, gauges, and testing equipment; removing engine from aircraft, using hoist or forklift truck, disassembling and inspecting parts for wear, cracks, security, or other defects, and repairing or replacing defective engine parts and reassembles and installs engine in aircraft. Job duties require that this mechanic: adjusts, repairs, or replaces electrical wiring system and aircraft accessories, performs preflight, thru-flight, and post-flight maintenance inspections, performs miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens and filters, greasing moving parts, and checking brakes. This incumbent supervises the jacking and towing of aircraft, enters in the maintenance records description of the work performed and verifies the work was performed satisfactorily, may service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition, may specialize in work, repair and modification of structural, precision, and functional spare parts and assemblies, and may specialize in engine repair. This worker may be required to be licensed by Federal Aviation Administration.

Qualifications and Education Requirements
Applicant must have H-60 experience. H-47 experience is also welcome.
-Applicant must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts.
-Applicant must have experience installing and testing of electrical/avionic systems. Experience in wiring schematics and wire running of Aircraft a plus.
-Applicant must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers.
This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.
Must be able to prioritize workload to maintain schedules on assigned projects.
-Applicant must be able to travel when required. This requirement may encompass 20% - 40% of the work year.
-Applicant must be able to work Overtime as needed.
-Applicant must be able to work multiple shifts as required for need of schedule/budget.

Preferred Skills
Applicant shall be familiar with the MOC’s and troubleshooting of engine control systems, ASE, directional and communications radios, CAAS cockpit integration, digital auto-pilot and Stabilator.
-Applicant shall be proficient in reading and interpreting schematics, engineering drawings and technical manuals.
-Applicant shall be familiar with documenting work in logbook, performing PMD and 40 Hour inspections.
-Applicant shall be able to perform fuel systems checks to include refuel and defuel operations and checking valve logic, fuel operations testing and MOC. Troubleshooting of fuel system to include but not limited to electrical, fuel flow rates, and mechanical failures.
-Applicant shall be knowledgeable of APU operations and troubleshooting, aircraft generator troubleshooting to include electrical and mechanical failures. Service hydraulic systems, engine, transmission and gear boxes. Perform flight control rigging, MOC’s and troubleshooting to include but not limited to electrical, hydraulic and mechanical failures.
-Applicant shall be able to assist Quality in performing aircraft weight and balance and preparing aircraft for flight. Additional duties to include removal and reinstallation of aircraft panels, cabin floors, cabin and cockpit doors.
-Applicant shall be able to assist in performing structural and mechanical modifications and repairs if necessary/required.

Qty 4 positions needed
This position is for an Electrical/Avionics mechanic. The candidate will be working on electrical modifications and repairs.
 
Job Number: JE-1746-1S
Job Location: Lexington, KY
Rate: 30.29/hr max
Duration: 3 months
Input Date: 09/16/2019
Last Updated: 10/16/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Aircraft Mechanic II

Description:
Chipton-Ross is seeking an Aircraft Mechanic II for an opening in Lexington, KY.

RESPONSIBILITIES
This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals. Job requirements: must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects.

REQUIREMENTS
Desired Applicant must have experience and ability to operate or perform one or more of the following:
Aircraft structural experience in modification to include but not limited to structural TM/TO repairs, build to print assembly and installation. The candidate must have a common knowledge of tooling required for performance of aircraft structural work. Must be a qualified aviation sheet metal mechanic, employee must have experience in aviation sheet metal, hardware installation such as rivet installation, HI-Loc installation, etc. Candidate must have fabrication to facilitate plane side repairs.
Candidate must have advanced sheetmetal skills that can work with little direction on complex modifications.
- Must be able to work shift schedules during this duration as required by program schedule and customer requirements.
- Candidate must have a high school diploma, or equivalent.
- Minimum 3 years intermediate level aircraft repair or modification experience required.
- Must be proficient in reading and interpreting schematics, engineering drawings and technical manuals / technical orders.
- Minimum 3 years experience with one of the listed airframes H-60, AH-64, CH-47 or OH-58.

DESIRED
MH-60M experience preferred.
- Documented Military/DOD Service School or Civilian/FAA equivalent training desired.
- Depot Maintenance Repair experience

WORK SCHEDULE
4/10

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 180169
Job Location: Lexington, KY
Rate: Up to $31.59 DOE
Duration: 3 Months
Input Date: 07/02/2019
Last Updated: 10/17/2019
Firm Name: CHIPTON ROSS
Attention: Melody Mullins
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: mmullins@chiptonross.com
Website: www.chiptonross.com

Aircraft Mechanic II

Description:
Chipton-Ross is seeking an Aircraft Mechanic II for an opportunity in Lexington, KY

RESPONSIBILITIES:
This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals.

REQUIRED EXPERIENCE:
must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects.
- Minimum 3 years intermediate level aircraft repair or modification experience required.
- Must be proficient in reading and interpreting schematics, engineering drawings and technical manuals / technical orders.
- Minimum 3 years experience with one of the listed airframes H-60, AH-64, CH-47 or OH-58.

Desired skills :
MH-60M experience preferred.
- Documented Military/DOD Service School or Civilian/FAA equivalent training desired.
- Applicants with a current active Secret level security clearance.
- Depot Maintenance Repair experience

EDUCATION:
Accredited High School Diploma/GED

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

WORK HOURS:
Full-Time, 4/10
Must be able to work shift schedules during this duration as required by program schedule and customer requirements.
 
Job Number: 180155
Job Location: Lexington, KY
Rate: $DOE
Duration: 3 MONTHS
Input Date: 07/01/2019
Last Updated: 10/17/2019
Firm Name: CHIPTON ROSS
Attention: Emmanuel Morgan
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: emorgan@chiptonross.com
Website: www.chiptonross.com

Aircraft Mechanic II - Clearance KY

Description:
165377 Job Title: SCA Aircraft Mechanic II
Work Site Address: Lexington, KY 40516
Job Number: 1749-1
Max Pay Rate: $31.59/hr
Start Date: 7/15/2019
End Date: 10/13/2019
Position Type: Contract
• Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company.

Job Summary:
This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals. Job requirements: must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects.


Qualifications and Education Requirements
Desired Applicant must have experience and ability to operate or perform one or more of the following:
Aircraft structural experience in modification to include but not limited to structural TM/TO repairs, build to print assembly and installation. The candidate must have a common knowledge of tooling required for performance of aircraft structural work. Must be a qualified aviation sheet metal mechanic, employee must have experience in aviation sheet metal, hardware installation such as rivet installation, HI-Loc installation, etc. Candidate must have fabrication to facilitate plane side repairs.
Candidate must have advanced sheetmetal skills that can work with little direction on complex modifications.
- Must be able to work shift schedules during this duration as required by program schedule and customer requirements.
- Candidate must have a high school diploma, or equivalent.
- Minimum 3 years intermediate level aircraft repair or modification experience required.
- Must be proficient in reading and interpreting schematics, engineering drawings and technical manuals / technical orders.
- Minimum 3 years experience with one of the listed airframes H-60, AH-64, CH-47 or OH-58.

Preferred Skills
MH-60M experience preferred.
Documented Military/DOD Service School or Civilian/FAA equivalent training desired.
Depot Maintenance Repair experience

Qty 8 positions needed
This position is for a structural mechanic. The candidate will be working on structural modifications and repairs.
 
Job Number: JE-1749-1S
Job Location: Lexington, KY
Rate: 31.59/hr max
Duration: 3 months
Input Date: 09/16/2019
Last Updated: 10/16/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Aircraft Mechanic II - Structural

Description:
Chipton-Ross is seeking 10 Aircraft Mechanic II's for openings in Jacksonville, FL.

RESPONSIBILITIES:
This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals. Job requirements: must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects.

REQUIRED EXPERIENCE:
Minimum 5 years of aircraft structural repair.

EDUCATION:
Accredited High School Diploma or GED

FULL TIME/VARIABLE SHIFT
WORK HOURS: This position may require 2nd or 3rd shift assignments and overtime as requested by management.

 
Job Number: 180533
Job Location: Jacksonville, FL
Rate: $DOE
Duration: 12 Months
Input Date: 07/19/2019
Last Updated: 10/17/2019
Firm Name: CHIPTON ROSS
Attention: Johnnie Barrientos
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: jbarrientos@chiptonross.com
Website: www.chiptonross.com

Assembly & Test Technician - Level 3

Description:
PDS Tech Inc. is seeking an Assembly & Test Technician, in Northford, CT.

Summary:
Must have experience in electronic repairs, troubleshooting printed circuit boards 
Low Voltage Knowledge 

Responsibilities of the Test Technician will include:
  • Adhere to Test Technician standardized work. Work from schematics, diagrams, work instructions, prints, and test specifications to test, evaluate, inspect and troubleshoot products.
  • Analysis of test failures and trouble-shooting of products to component level using multi-meters, oscilloscopes, various other diagnostic equipments. 

     

Required Skills and Knowledge: 

• Knowledge of schematics, diagrams, work instructions, prints, and test specifications to test, evaluate, inspect and troubleshoot products. 

• Understanding of electronic circuits to include amplifiers, comparators, switching power supplies, A/D converters, microprocessors, filters, and oscillators. 

• Understanding of safe practices for working with electrical circuits. 

• Familiarity with surface mount and through-hole electronic components. 

• Ability to troubleshoot analog and digital circuits to the component level. 

• Understanding and application of ICT and functional testing of subassemblies. 





Qualification: 

• Associates Degree in Electronics Engineering or equivalent 

• Must possess effective written and verbal communication skill. 

• Must adapt well to a changing environment.  

• Experience using variable power supplies, multi-meters, oscilloscopes, and PCs. 

• Experience troubleshooting electronic circuits. 
 
 
Job Number: 1810090928
Job Location: Northford, CT
Duration: 6 months
Input Date: 02/06/2019
Last Updated: 10/17/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Betsy Murphy
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002exuhAAA&URLSource=cjhunter

Automation Controls Electrical Engineer

Description:
Chipton-Ross is seeking an Automation Controls Electrical Engineer for an opportunity in Los Angeles HQ

RESPONSIBILITIES:
THE PURPOSE:
The Automation Team serves to support the development, manufacturing, and installation of Client systems globally. The team specifies, designs, procures, and fabricates a wide variety of automated manufacturing and assembly/installation equipment. The Electrical Engineer is an integral member of the Automation Team who provides expertise and capability in electrical, pneumatic, and hydraulic design to enable the success of departmental projects.

THE ROLE:

The Electrical Engineer will be responsible for owning the electrical, pneumatic, and hydraulic aspects of various automation and machine control projects. These may vary from small R&D tasks to large scale production equipment. The Electrical Engineer will work with internal customers to define the needs and specifications for their projects. These projects will generally be interdisciplinary, and the engineer will work with other members of the Automation Team (software, mechanical, and applications engineers) to deliver an integrated and functional solution.

Responsibilities include:
-Developing, testing, installing, and integrating electrical, pneumatic, and hydraulic solutions related to high speed custom automation, machine vision, feedback systems, and robotics.
-Working with internal customers to define functional and safety requirements
-Working with interdisciplinary teams on mechanical and software integration
-Working with electrical contractors and 3rd party integrators to deliver fully integrated solutions.
-Debugging and optimizing automated processes.
-Auditing internal and 3rd party equipment for electrical design compliance
-Creating interconnection diagrams/spreadsheets for field technicians.
-Supporting equipment deployment at Client One facilities and vendor facilities as needed

THE CANDIDATE:

The candidate must be an experienced engineer with demonstrated talent and capability in electrical, pneumatic, and hydraulic system design. He or she must be able to show a track record of successful industrial machine controls and automation design and implementation.

"He or she must be an excellent communicator, and thrive in a high-energy, quick-moving, and interdisciplinary workplace.
"Comfortable working cross-functionally"

MINIMUM REQUIRED EXPERIENCE:
-Have an excellent understanding of NFPA-79, ISO-13849, UL508A and OSHA standards.
-Have experience designing professional schematics (electrical, pneumatic and hydraulic) in AutoCAD electrical.
-Have experience with Allen Bradley and Siemens PLC's.
-Have experience with Servo's, VFD's and motion controls.
-Have excellent troubleshooting skills.
-Proficiency with process integration and electromechanical systems.
-Have experience with a wide variety of industrial sensors and production equipment.

PREFERRED EXPERIENCE:
-BS in electrical engineering.
-5+ years of experience as a hands-on controls engineer, designing industrial controls equipment.
-Have experience with industrial robots. (Fanuc, Kuka, Motoman)
-Experience with vision systems. (Cognex, Keyence)
-Have experience with safety PLC's
-Is proficient in ladder logic.

EDUCATION:
Accredited Bachelor's Degree

WORK HOURS:
Full-Time
40 hours per week
 
Job Number: 179631
Job Location: Los Angeles,
Rate: $DOE
Duration: 1-3 months
Input Date: 05/30/2019
Last Updated: 10/17/2019
Firm Name: CHIPTON ROSS
Attention: Christophor Long
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: clong@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Automation Engineer

Description:
Location: Riverside, CA
Rate: $75.00/HR
Duration: 1 year contract
Shift: 2nd Shift
Per Diem Split: No

****MUST be a U.S. Citizen or Permanent Resident****
****MUST have a Bachelor's Degree****

Primary Responsibilities:
1. Performs relentless root cause analysis to eliminate downtime on CNC equipment and robots.
2. Assists maintenance personnel in diagnosing equipment issues, addressing machine alarms/faults, and developing preventative maintenance plans.
3. Works on projects to assist in the technical planning, system integration, verification and validation for CNC and robotic systems.
4. Creates and maintains standard work for machine operators and engineering processes, including verification and certification procedures.
5. Seeks to identify possible problems presented in applicable projects that may cause a delay or exceed budget.
6. Contributes to finding appropriate solutions.
7. May require travel to Mexicali for equipment support/training.

Required Skills and Experience:
1. Bachelor of Science in Electrical, Mechanical, Aerospace or similar discipline, with 5-7 years experience in an engineering role supporting CNC equipment and robots.
2. Masters of Science in Electrical, Mechanical, Aerospace or similar discipline, with 2-3 years experience in an engineering role supporting CNC equipment and robots.
3. Expertise with the operation of CNC equipment with Siemens 840D controllers, Fanuc 16i, Kuka robots, Fanuc robots, etc.
4. Excellent verbal and written communications with all levels of the organization.
5. Fluency in reading, interpreting and creating electrical, mechanical, and fluid drawings/schematics.

Preferred Skills and Experience:
1. Experience with programming languages such as Python or C+
2. Basic knowledge of SQL databases ad computer networking
 
Job Number: 11309
Job Location: Riverside, CA
Rate: $75.00/HR
Per Diem: No
Overtime: Possible
Duration: 1 yr
Input Date: 08/12/2019
Last Updated: 08/20/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Automation Engineer (CNC)

Description:
2nd shift Automation Engineer

Primary Responsibilities:
Performs relentless root cause analysis to eliminate downtime on CNC equipment and robots.
Assists maintenance personnel in diagnosing equipment issues, addressing machine alarms/faults, and developing preventative maintenance plans.
Works on projects to assist in the technical planning, system integration, verification and validation for CNC and robotic systems.
Creates and maintains standard work for machine operators and engineering processes, including verification and certification procedures.
Seeks to identify possible problems presented in applicable projects that may cause a delay or exceed budget.
Contributes to finding appropriate solutions.

Required Skills and Experience:
Bachelor of Science in Electrical, Mechanical, Aerospace or similar discipline, with 5-7 years experience in an engineering role supporting CNC equipment and robots
Masters of Science in Electrical, Mechanical, Aerospace or similar discipline, with 2-3 years experience in an engineering role supporting CNC equipment and robots
Expertise with the operation of CNC equipment with Siemens 840D controllers, Fanuc 16i, Kuka robots, Fanuc robots, etc.
Excellent verbal and written communications with all levels of the organization.
Fluency in reading, interpreting and creating electrical, mechanical, and fluid drawings/schematics.

Preferred Skills and Experience:
Experience with programming languages such as Python or C+
Basic knowledge of SQL databases ad computer networking
 
Job Number: 50456
Job Location: Riverside, CA
Duration: 12 months
Start Date: ASAP
Input Date: 08/09/2019
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Rick Nussbaum
Address: 1857 WELLS RD STE 214
City, State: ORANGE PARK, FL 32073
Phone: 904/562-3221
800 Phone: 866/277-3343
Fax Phone: 904/713-2000
Website: www.apollopros.com

Aviation Mechanics - Clearance

Description:
Seeking Experienced Aviation Mechanics for a contract opportunity in San Antonio, Texas!

Work to be performed on a VIP aircraft, 747 platform and active Top Secret Clearance Required.
Several Openings For:
  • General Mechanic
  • Electrical
  • Structures
  • Avionics Tech
  • Quality Inspection
  • Supply Chain Specialist


Great Opportunity for Ex-military/Exiting Military/ and Veterans
Previous military experience a plus!


 
Experience performing routine maintenance, modifications, and rework on VIP - 747 aircraft.
Required- Minimum of 5 years' experience working on 747 platform.
Tools: no tools required
Location: San Antonio, Texas

***Current Security Top Secret Clearance required
US Citizenship Required: Clearance requirements will be used during resume screening. Individuals must hold a current Clearance or Equivalent Clearance/ investigation type to be considered for this position, clearance level must be noted on the resume. Must follow submittal procedures below for consideration. No phone calls please, only candidates that provide resumes with the job ID number will be contacted and considered for the opportunity.

**submittal must reference Job ID number 1710063637

Camille Zunker- czunker@pdstech.com
 
Job Number: 1710063637
Job Location: San Antonio, TX
Duration: 12 months
Input Date: 02/27/2017
Last Updated: 10/17/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Camille Zunker
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002GBZ0AAO&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionic Technician - Clearance CA

Description:
164441 1657-1 Avionic Technician
Work Location: Edwards AFB, CA
Status: Open

Qty: 2
Desired Start Date: 7/8/2019
End Date: 6/5/2020
• Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company.

Job Description:
Candidate must have a minimum of 8 years’ experience in fighter aircraft electrical maintenance
Knowledgeable of Tool Control, FOD, Supply, HAZMAT, Training, Quality, and Security programs.
F-22 Electrical/Avionic system experience is preferred
F-22 Low Observable materials application (Desired not required)
Services, repairs, and overhauls F-22 aircraft electrical systems to ensure airworthiness. Repairs, replaces, and rebuilds aircraft electrical systems. Incorporate engineering changes. Replaces and repairs worn or damaged components. Adjusts, repairs, and replaces electrical wiring system and aircraft accessories.

Work typically requires a detailed understanding of the interrelationships of circuits. Perform such tasks as making circuit analyzes, and tracing relationships in signal flow. Use complex test instruments such as high frequency pulse generators, frequency synthesizers, distortion analyzers, and complex computer control equipment. Work may be reviewed by supervisor for general compliance with accepted practices, may provide technical guidance.

Read and interpret engineering drawings, technical manuals, repair manuals, understanding symbols, flags, and general notes - Identify aircraft locations by station, butt-line, and waterline as shown on engineering documentation and technical orders

Regularly required to perform repetitive movements, work overhead, use hands to grasp, handle, and/or feel, reach with hands and arms, talk, and hear. The employee is frequently required to stand, walk, stoop, kneel, squat, crawl, and twist.
Work in a safe and efficient manner while maintaining a clean, FOD-free work area.


Pay Rate: $31.85 Hourly

Experience
Areas of Expertise F-22 No 1
 
Job Number: JEG -1657-1S
Job Location: Edwards AFB, CA
Rate: 31.85/hr max
Duration: 12 months
Input Date: 09/23/2019
Last Updated: 10/01/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Avionics & Electrical Design Engineers

Description:
SolidWorks aircraft electrical and avionics upgrades

Immediate needs - email a resume and call our national recruiters
 
Job Location: Nationwide
Input Date: 06/12/2018
Firm Name: ADDITIONAL CONTRACT SERVICES
Address: 85 RANGEWAY RD BLDG 1 STE 2
City, State: NORTH BILLERICA, MA 01862
800 Phone: 800/661-8272
Email: acs@acsnatl.com
Website: www.acsnatl.com

Avionics Cable Harness Design Engineer

Description:
Seeking Avionics Cable Harness Design Engineer:
Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder)

Responsibilities:
•Design of electrical harnesses for power distribution, RF, communication and high speed data signal
•Selection of harness components and hardware, connectors, backshells, cable and wire
•Understanding and application of EMI/RFI and harness shielding
•Create 3D routed harness data files utilizing Creo (Pro/Engineer) Cabling and Routed System Designer (RSD)
•Create harness detail and installation drawings including 2D flat harness drawings from the 3D harness data sets
•Design and integration of harness support brackets
•Support design configuration development and trade studies
•Provide technical guidance for hardware installation
•Active involvement in the assembly and testing of cables and harnesses
•Maintain and report on activity schedule and technical status
•Identify opportunities for improvements and operational cost and schedule savings

Qualifications:
•B.S. degree or higher in Mechanical or an appropriate engineering field
•Experience with Creo / ProCabling highly desired; equivalent other software will be considered if all other required qualifications are met
•Understanding and application of wire derating analysis
•Familiar with existing applicable harness standards:◦IPC/WHMA-A-620A, NASA-STD-8739.4
•Strong electrical/mechanical design and integration skills using 3-D CAD software
•Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder)
 
Job Number: ProCable PL WA
Job Location: Renton, WA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6-12 months
Start Date: 2 weeks
Input Date: 07/10/2019
Last Updated: 10/17/2019
Firm Name: ADVANCED TECHNOLOGY
Attention: Peggy Sr. Recruiter
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: plundie@advancedtechno.com
Website: www.advancedtechno.com

Avionics Electrical Engineers

Description:
Jets experience a plus
 
Job Location: Southeast
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: jmac@advancedtechno.com
Website: www.advancedtechno.com

Avionics Electrical Engineers

Description:
Jets experience a plus
 
Job Location: Midwest
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: jmac@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
RESPONSIBILITIES:
This position provides support to the Air Force’s Life Cycle Management Center’s (AFLCMC) Technical Engineering Services Directorate (AFLCMC/EZ) in conducting an analysis of the known Navigation Warfare (NAVWAR) and cyber risks associated with positioning, navigation, and timing (PNT) avionics onboard USAF aircraft. The engineer will contribute to AFLCMC/EZ’s effort to analyze NAVWAR and cyber risk associated with PNT subsystems for USAF aircraft. The engineer will work daily with Government employee PNT technical experts and cyber risk assessment specialists. The engineer will frequently be called on by the AFLCMC/EZ Government customer to facilitate technical meetings and support the development of cyber and NAVWAR risk assessment briefings.
Responsible for collaborating with Government employees to conduct NAVWAR and cyber risk analyses for PNT avionics subsystems. The engineer will facilitate risk analysis activities both within AFLCMC/EZ and in outreach activities with USAF aircraft System Program Offices (SPOs) and technical centers of excellence across DoD. Responsible for the day-to-day execution of NAVWAR and cyber risk analysis and reporting activities under the oversight of AFLCMC/EZ Government employees. Facilitates the planning and execution of technical interchanges associated with avionics cyber risk analyses.

REQUIRED EXPERIENCE:
5 years of military or commercial avionics experience
5 years of experience as a DoD employee or contractor
Excellent planning and organizational skills, both in terms of task execution tracking and task planning
Excellent communications skills, both written and verbal
Proficiency with Microsoft Office tools (Word, PowerPoint, Outlook)

DESIRED QUALIFICATIONS:
Active TOP SECRET/SCI security clearance
3 years of experience at an AF Product/Logistics Center, or similar US Army/US Navy Center, assigned to a System Program Office; or 3 years of experience in the AFLCMC Engineering Directorate
Experience with industry standard or DoD operational risk management practices
Familiarity with the RMF as it applies to avionics subsystems
Level II DAWIA Certification in Engineering, Test and Evaluation, Information Technology, Program Management
Experience as an FAA Designated Engineering Representative (DER) or a similar position

TRAVEL: 10%

EDUCATION:
Accredited Bachelor’s Degree in Electrical Engineering, Computer Engineering, Aerospace Engineering, Software Engineering, Computer Science or a closely related field. Applicants with electrical engineering technology, mechanical engineering, operations research, mathematics, or statistics will be considered as well.

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

WORK HOURS:
Full-Time/First Shift
8:00 AM - 5:00 PM
 
Job Number: 180331
Job Location: Wright-Patterson AFB, OH
Rate: OPEN
Per Diem: Split possible
Overtime: Not specified
Duration: 12/+ months
Start Date: ASAP
Input Date: 07/24/2019
Last Updated: 07/31/2019
Firm Name: CHIPTON ROSS
Attention: Terry Jones
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics System Safety Engineer

Description:
We are currently seeking an Aviation Safety expert to fill an opening for a company in Nagoya, Japan. Interested candidates should have previous aircraft or aviation experience as well as 8 plus years of hands on system safety work.

Responsibilities of the Avionic System Safety Engineer

Creation and integration of SFHA/SSA/CMA Avionics Systems.
Technical coordination with aviation authorities including FAA, JCAB and EASA.
Technical scheduling and coordination with suppliers and internal departments.
Other activities related to Safety Assessments.



Requirements of the

4 year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation).
8 plus years of experience in Avionics System Safety.
Must have excellent written and verbal communication skills in English.
Previous aircraft or aviation experience.
 
Job Location: Japan
Duration: 2 Years
Start Date: ASAP
Input Date: 09/06/2019
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

Avionics and Electrical Systems- UM

Description:
PDS Tech Inc is seeking a  Avionic and Electrical Systems - UM in Wichita, KS

JOB RESPONSIBILITIES:

This role will gain valuable engineering experience in the area of design requirements including capture, design, validation, troubleshooting, and certification of aircraft avionic and electrical systems. Working with managers and key players in Engineering, Candidates will assist in the development and evaluation of crucial systems on Textron Aviation Products. Prepare engineering drawings for avionics and electrical system interface wiring using computer based drafting tools (CATIA/CCD and/or IAI HarnesSys). Utilize electronic test equipment to verify avionics and electrical systems meet design requirements, and/or for system troubleshooting in the lab and on aircraft. Prepare engineering trade studies, functional test procedures, certification plans, ground and flight test plans, certification reports, and other engineering documents. Write technical descriptions of subject matter pertinent to design or test requirements. Includes descriptions of supplier parts, test or rigging specifications, etc. Assist with the evaluation and analysis of avionics and electrical system design for completion of function hazard assessments and system safety assessments.


 
 



 
Job Responsibilities:
• DER/UM-related duties missing; ensuring that the proposed design is certifiable, coordinating with the FAA, resolution of certification issues, determination of the certification basis, writing the certification plan, witnessing certification testing, find compliance.
• Responsible for successful integration and certification of vendor equipment into Cessna Citation aircraft. Assists in preparation of reports, engineering drawings, reports and other documents. Coordinates with direct and indirect customers and suppliers to determine system requirements and resolve problems.
• Responsible for completing complex development, design, testing and certification assignments for new design or modifications. Develops creative, scientific alternatives during course of job assignments to reach desired outcome.
• Conducts research, calculations, estimates and drafting of projects to conform with established specifications such as capacities, styling, performance and determine status of work in progress. Performs above work utilizing frequent application of in-depth engineering principles.
• Maintain a high degree of proficiency in computer applications to accomplish tasks.
• Consults and coordinates with other engineering and manufacturing personnel to coordinate design function and resolve technical problems. Consults with supplier to discuss and remedy issues in a timelier and efficient manner.
• Requests and coordinates work performed by Engineering support groups, Experimental, Manufacturing and Supply Chain Management for the project. Instructs suppliers as to materials, equipment and hardware for utilization on aircraft in accordance with approved specifications.
• Maintains contact with Product Support Engineering and production departments to resolve engineering problems impeding production and to assist in the incorporation of new design concepts and changes.
• Monitors and conducts analyses on first article fabrication and operation to assure adequacy of design.
• Reviews and evaluates supplier proposals for potential utilization on future models.
• Provides guidance to engineers and report writers in the solution of specific, complex design problems, which must be resolved during development and testing.
• Assures supervision awareness of program status, problems and successes. Provides periodic design reviews and update presentations to management of engineering and other company organizationsand tools.

 
Education and Experience:
• B.S. or advanced degree in Aeronautical, Mechanical, or Electrical Engineering, Physics, Math, Statistics or related technical degree required
• Minimum 7 years of experience in General Aviation or Business Aircraft development programs

• Avionics and Electrical System DER qualifications (FAR 23 or 25).
• Experience with domestic and foreign business and/or general aviation aircraft certification process is required
• Some experience in system assessment using modeling tools such as Failure Modes and Effect Analysis (FMEA), (Failure Modes and Effect Criticality Analysis (FMECA), Reliability Block Diagram (RBD), and Fault Trees Analysis (FTA) is desired.
• Experience with Microsoft Office software application and working environment is required.
• The candidate must be able to work in a team environment and be able to clearly communicate thoughts and ideas with peers, management, and certification authorities.

 
 
Job Number: 1910097710
Job Location: Wichita, KS
Duration: 6 months
Input Date: 03/14/2019
Last Updated: 10/17/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Marjorie Santiago-Marquez
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002r9TlQAI&URLSource=cjhunter

Avionics/Elec Tech II

Description:
PDS Tech is seeking a Avionics/Electrical Tech II for an open position in Savannah, GA.

Provides technical expertise in testing aircraft systems, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. May fill in for the Senior Avionics/Electrical Technician thus ensuring that the company goals of safety and quality are enforced at all times while adhering to daily work plans to maintain schedule requirements. 

Principal Duties and Responsibilities:

Essential Functions:

  • Demonstrates technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting.
  • Performs the installation and functionally testing of electrical/avionics components and systems on aircraft per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
  • Ensures quality and efficiency of all installations: troubleshoots processes/concepts to provide timely, quality repairs of malfunctioning systems.
  • Demonstrates the skills and knowledge required to effectively and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring.
  • Performs and complies with engineering changes and modifications as required.
  • Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability.
  • Ensures that all work performed on the aircraft is properly and completely documented and ready for inspection.
  • Tests and maintains test equipment, electronic systems, and components.
  • Complies with the company FOD program, tool control program, 5-S program and all safety regulations.
  • Adapt to sudden schedule changes. 

Additional Functions:

  • In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
  • Performs other duties as assigned. 


 


 

Education and Experience Requirements:



  • High School graduate/GED.
  • A & P license, FCC license or NCATT certification preferred.
  • Four (4) years experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and two (2) years related experience.

Other Requirements:

  • Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs.
  • Ability to read and interpret basic blueprints and schematic diagrams.
  • Demonstrates excellent communication skills. Must be able to communicate effectively both verbally and written.
  • Must be able to climb stairs and ladders, work in confined areas and lift up to 50 pounds.



 

  


 


 
Job Number: 1910102788
Job Location: Savannah, GA
Duration: 6 months
Input Date: 07/04/2019
Last Updated: 10/17/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Rodney Kinlaw
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033jFeQAI&URLSource=cjhunter

Avionics/Electrical Tech Sr

Description:

PDS is seeking an Avionics/Electrical Tech Sr. for an open position in Savannah, GA



Position Purpose:
Provides leadership, technical expertise and guidance while performing various operational, functional tests and repairs of avionics/electronic, aircraft equipment and systems to ensure a defect free aircraft. Provides superior technical expertise in testing, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise and leadership by defining and implementing process changes to reduce cost and meet schedule without compromising Safety or Quality. Demonstrates the knowledge and leadership skills required to fill in for the team leader thus ensuring that the company goals of Safety and Quality are enforced all times while adhering to daily work plans to maintain schedule requirements. 

Principal Duties and Responsibilities:



  •  Demonstrates superior technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting. Provides direct training to personnel to support company cross-training goals while ensuring a safety conscience, quality oriented, skilled workforce.
  • Teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
  • Ensures quality and efficiency of all installations: troubleshoots and teaches troubleshooting processes/concepts to provide timely, quality repairs of malfunctioning systems.
  • Demonstrates the skills and knowledge required to effective and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring.
  • Oversees the performance and compliance with engineering changes and modifications as required.
  • Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability.
  • Demonstrates through diligent compliance the importance of daily logs and other paperwork. Ensures that all work performed on the aircraft is properly and completely documented
  • As required, pre-inspects work of others prior to submitting to inspection for approval to reduce rework and inspection time.
  • Provides the knowledge and technical expertise in testing and maintaining test equipment and electronic systems and components as required.
  • Enforces the company FOD program, tool control program, 5-S program and all safety regulations.
  • Maintains required logs and records.
  • Adapts to sudden schedule changes.
  • Coordinates with other disciplines concerning projects. 



Additional Functions:



  • Where required, teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
  • Self inspection capability for all avionics testing functions in applicable areas.
  • In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
     


 


Education and Experience Requirements:
High School Diploma or GED required. Six (6) years experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and four (4) years related experience. A&P (FAA Airframe and Powerplant) license preferred. Other FCC License preferred. Other NCATT preferred. 


Other Requirements:

  • Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs.
  • APU run qualification and engine run qualification preferred.
  • Ability to read and interpret basic blueprints and schematic diagrams.

 

Unique Skills:



G650 experience preferred.



 


 

 
Job Number: 1910101665
Job Location: Savannah, GA
Duration: 6 months
Input Date: 04/30/2019
Last Updated: 10/17/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Donnell Covington
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033fd0QAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Construction Safety Engineer

Description:


























Construction Safety Engineer




ROLE SUMMARY



Position involves over-site for all trades within Construction Safety including maintenance, facilities and Site Services contractors at the Site. Leads EHS support for Capital projects.

ROLE RESPONSIBILITIES


  • Serve as program owner for the Site's Contractor Safety program that includes knowledge of construction crane safety, confined space, hot work, fall protection, line breaking and lockout, excavations, silica, electrical safety, waste management and scaffolding.

  • Serve as a member of the Site's Environment Health and Safety team.

  • Over-site of processes/systems that ensure contractors and colleagues are compliant with federal, state, local Construction Safety Regulations, Pharmaceutical's Construction Safety Guidelines and Global and Site EHS requirements.

  • Conducts field inspections on Construction projects to identify hazards and opportunities for improvement.

  • Responsible for ensuring that positive working relationships with key stakeholders are maintained.

  • Assist in establishing Contractor Safety short and long-term strategies, ensuring program effectiveness through continuous improvement of processes such as but not limited to, contractor prequalification, site compliance inspections, program evaluations, and process simplifications.

  • Primary oversight of effective safety activities such as coaching the contractor and project staff on safe work practices, pre-job safety planning (i.e. co-leading meetings, job safety analysis and working at heights planning), safety observations, site inspections/audits, and corrective action plans.

  • Pre-plan review and oversight of high-risk activities such as lift plans, elevated work, electrical energizing/testing etc.

  • Participate in Project Reviews for contracted maintenance work and coordinate Site Safety Plans with contractors. Review construction methods as part of project team and with Maintenance Contract Managers, from early project planning through completion of project.

  • Lead and set expectations on proper safety planning, enhancing the use of Pre-Job Hazard Assessments on construction and eventually non-construction areas.

  • Develop and ensure processes are in place to assure that contractors and project team members or maintenance contractor managers to the construction site understand the environmental and safety expectations. (Actual training is performed by Contractor Safety personnel).

  • Performs Contractor Safety Gap assessments to continually improve the Site's program.

  • Provides technical consulting for construction site safety related issues along with serving as a liaison across Operations, EHS, Maintenance, and Capital Project teams. Provides EHS leadership in risk-based decision making while keeping key organizational Leaders informed in Construction Safety.

  • Support the site with review of contractor incidents and, remediation or improvement plans, and other actions to ensure contractor safety for all trade contractors on-site. Review contract firm safety programs for compliance with Pharmaceutical programs and best practices.

  • Identify trends and best practices in the contractor safety area and implement new site programs for trade contractors as appropriate. This includes defining metrics to evaluate contractor's performance.

  • Successfully uses recognized system analysis tools to perform risk assessments, investigations, program auditing that result in identifying value-added improvements. Identify trends that have the potential to create harm to people, work, environments or communities.

  • Conducts and documents project level incident investigations; documenting root causes contributing to an incident and corrective actions.

  • Understands and interprets electrical safety standards; the National Electric Code (NEC), the National Fire Protection Association (NFPA) 70E, NESC (National Electrical Safety Code).




BASIC QUALIFICATIONS

  • Bachelor Degree in Engineering with at least 3-years of experience in Construction Safety


or

Associate Degree in Engineering with at least 5-years of experience in the Construction Safety field.


  • Has strong knowledge of the 26 CFR OSHA (MIOSHA) Construction safety and 29 CFR General Industry OSHA (MIOSHA) regulations, along with programs such as Fall Protection, Crane Safety, Excavation, Confined Space, Hot Work, Safe Work Permitting, Lockout and Line Entry.

  • Experience in assessing risks, developing and implementing proactive strategies to minimize related incidents and process deviations. Documenting such information for the purposes of informing others of risk factors and resolutions.

  • Experience in developing and implementing Safety and Environmental programs to facilitate compliance that meet and exceed MIOSHA General & Construction Industry Safety Regulations.

  • Successfully manages projects, is process minded and demonstrates the ability to build and execute action plans both individually and through project teams to ensure alignment in pursuit of organizational deliverables. Motivation and ability to execute projects/tasks in a timely manner, Strong prioritization and time management skills

  • The ability to solve complex technical problems and provide expert technical support, managing EHS projects.

  • Demonstrated ability to successfully influence and engage with multiple levels of the organization and the proven ability to lead cross functional teams.

  • Excellent interpersonal and conflict resolution skills

  • Well-developed verbal and written communication skills

  • Able to function in a collaborative team environment, while also able to operate independently.

  • Demonstrates the ability to read design drawings (P&ID's, Electrical drawings, etc.).


PREFERRED QUALIFICATIONS


  • Project Management Professional (PMP) Certification.

  • Professional Engineer.

  • Six Sigma, LEAN Experience.

  • Has Project and/or facilities and equipment start-up and shutdown experience is a plus!

  • Working knowledge of program requirements such as Electrical Safety – the National Electric Code (NEC), the National Fire Protection Association (NFPA) 70E, NESC (National Electrical Safety Code) and NFPA 70E.






PHYSICAL/MENTAL REQUIREMENTS



Candidate must have the ability to effectively maintain emotional intelligence through conflict resolutions

Candidates should be capable of walking and climbing in a variety of work environments both inside and outside of buildings on a variety of work surfaces. Part of this job involves sitting and standing in a variety of office and conference settings.


NON-STANDARD WORK SCHEDULE, TRAVEL OR ENVIRONMENT REQUIREMENTS

Candidates are expected to be on call for EHS investigation purposes and at times may need to extend work schedule to manage workload. The position at times will require working varying shifts in order to support the needs of the EHS organization.


OTHER INFORMATION

  • Relocation Eligible





  • This position is supported by other contractor safety resources currently supporting the Site's Contractor Safety program.







Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-24813
Job Location: Kalamazoo, MI
Rate: 92900.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-06-17 00:00:00.0
Input Date: 08/12/2019
Last Updated: 09/18/2019
Firm Name: NESCO RESOURCE
Attention: David Wayne
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

Control System Engineer

Description:

Legacy Engineering, a division of PDS Tech, is seeking a Control System Engineer - Fire Protection System for the Regional Jet Program.



The primary work location will be in Nagoya, Japan. However, Engineers may be requested to relocate to Seattle or Moses Lake (Washington State, USA) where aircraft flight testing is performed.



The Control System Engineer will work as an Electrical Design Specialist for ATA 26-10 (Fire & Smoke Detection) and ATA 26-20 (Fire extinguishing). This includes all FPS system design aspects and interfaces within the FPS team and all other engineering teams; as well as interfacing with the FPS component suppliers in order to achieve the correctness and completeness necessary for FPS certification in the regional jet program.  



  • Basic work scope is to provide technical assistance to the development and certification of the regional jet program, focusing primarily on FPS performance assessment and optimization.
  • This activity includes:
    1. Prepare and review wiring diagram, electrical interface documents, Perform tests and troubleshooting in the RIG / Aircraft
    2. Support electrical qualification discussions for FPS components.
    3. Have the necessary technical background and competence in the system design as defined in this SOW scope.
    4. As required, conduct interface meetings with the FPS component suppliers.
    5. Prepare FPS design requirement documents, test specifications of type certification tests, test plans and test procedures,
    6. Coordinate with internal members, suppliers and authorities towards executing type certification tests.
    7. Prepare analysis documents, test compliance plans of analysis, and execute tests.
    8. Review supplier TSO and create TSO report
    9. Interface with the flight test team in Nagoya and the Seattle Engineering Office including Moses Lake to follow the FPS system tests conducted. Responsibilities include participating with the FPS team to prepare and/or review responses to flight test problem reports, review of test data and ground and flight test plans and test reports.
    10. Responsible for real-time telemetry monitoring during ground and flight tests, data analysis and documentation.
    11. Perform or assist with inspections and on-aircraft troubleshooting.
    12. Assist with identifying problems, adjusting and repairing systems during the troubleshooting process according to specifications, technical drawings, manuals and established procedures.
    13. Lead resolution of design challenges and any issues relate to aircraft certification.
    14. Act as an interface for the identified FPS ATA with the involved design specialists, FPS system supplier and subcontractors, in particular with the Interior Group.
    15. Be fully involved in supporting the Design Change process and activity.
    16. Perform other related tasks as assigned by the Team Leader.

  • Be prepared to work as a team member in a multi-cultural and international working environment at the Headquarter based in Japan. 
  • The engineer must be able to utilize interpersonal and communication techniques, working in a team environment as well as identifying potential issues with the ability to plan and implement short and long term goals in aircraft development.

  • Work Experience and Skillset:
    1. Each Engineer is mandated to meet the schedule by resolving problems and mitigating risk. Coordinate Interaction with other stakeholders (etc. PMO, SCM, and other engineering teams)
    2. All tasks required to perform above activities are considered within work scope; initiating/ reviewing related documents, discussion with relevant parties.
    3. Over 5 years experienced for designated design area.


 
Job Number: 1810094281
Job Location: Nagoya,
Duration: 18 months
Input Date: 10/16/2018
Last Updated: 10/17/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002qwKRQAY&URLSource=cjhunter

Controls Engineer

Description:
PDS Tech, Inc. is seeking a Controls Engineer in Auburn Hills, MI.

Responsibilities:


In-house equipment development:
  • Participate in initial equipment conceptual development and carefully balance product specifications, process control requirements, layout complexity, cost, quality and lead-time limits.
  • Lay out new industrial electrical control panels which are NFPA79/NEC/UL508A compliant, and create electrical, pneumatic and fluid schematics.
  • Architect, write, and debug PLC ladder logic with an emphasis on generating code that is organized, structured, documented, maintainable and reusable. PLC code will interact with subsystems such as conveyors, robots, Manufacturing Execution System (MES), LabView, machine vision, and 3rd party equipment.
  • Implement (ANSI/RIA15.06/OSHA compliant) control reliable safety systems for safeguarding robots, gantries, conveyors, and other high volume manufacturing equipment.
  • Generate aesthetically simple HMI screens for complex machinery while providing sufficient feedback for troubleshooting.
  • Manage electrical cabinet builds, field wiring, pneumatic and fluid plumbing.
  • Select and size electrical and electromechanical components such as servos.
  • Introduce automated processes into production, and train and Maintenance and Production Teams to support after deployment into production.
  • Create machine interactions with plant-wide Manufacturing Execution System (MES) to communicate product acceptability, machine status, and process variables.

 
Outsourced automation equipment development:

  • Participate in specification and standard creation, release to Vendor and quote technical evaluation.
  • Enforce application of standards, Manage suppliers during specification, design review, design approval.
  • Establish test plans and control test plan execution at Vendor and at Company facility during installation and buy-off.
  • Characterize and validate new automated process equipment for deployment into production.


Existing automation equipment refinement:

  • Debug and optimize automated processes to maximize cycle time, improve availability and yield.
  • Characterize and validate automated processes using a data driven approach such as simulation, Capacity and Capability statistical test (Gage Repeatability and Reproducibility test, Cpk, etc).
  • Assembly Line Development and Implementation.
  • Create detailed utility layouts for entire assembly lines and interface with facilities teams for implementation.
  • Create data management and tracking communications network architecture and interface with cross-functional teams for product, processes and quality traceability control implementation.

 
The ideal candidate takes pride in his/her hands-on work, analytical ability, organizational skills and attention to detail. He/She appreciates an environment where superior work is encouraged, noticed and rewarded and where individuals carry tremendous responsibility. He/She looks forward to learning an incredible amount on the job.
Requirements:
  • Proficiency with process integration and electromechanical/mechatronic systems.
  • In depth knowledge of Electrical Standards (NFPA79, National Electric code, UL508A).
  • In depth knowledge of Safety standards (ANSI/RIA15.06, OSHA).
  • Advanced proficiency programming industrial equipment: Ladder logic PLCs (Allen Bradley ControlLogix, CompactLogix and RSLogix 5000); Safety PLCs (Allen Bradley ControlLogix, SmartGuard); Human Machine Interface (HMI/GUI - AB Panelview, FactoryTalk, LabView, Ignition); Field bus Networks (AB DeviceNet, Ethernet IP, Safety rated field bus networks); & Ethernet communications between machine PLCs and database systems.
  • Demonstrated excellence in programming PLCs.
  • Must have a well-defined methodology for maintaining code structure and organization.
  • Ability to program state machines for complex processes which involve multi-station parallel. processing, pick and place automation, data acquisition, and PID control.
  • Proven ability to design fault-tolerant systems with error handling and recovery.

 
Qualifications:

  • BS/MS Electrical Engineering (or equivalent – Majors in: Controls and Computer Control Systems, Mechatronic Engineering, Automation Engineering, etc.), or equivalent experience.
  • 5+ years of experience as a hands-on Controls Engineer or Applications Engineer working on automation and/or electromechanical systems.
  • Experience managing capital projects and vendors.

 
Job Number: 1910102115
Job Location: Auburn Hills, MI
Duration: 12 months
Input Date: 05/16/2019
Last Updated: 10/17/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Katie Windhurst
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033gtOQAQ&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
DRAFTING SUPPORT

Description:
Role: Drafting Support
Location: Vandenberg AFB, CA
Duration: 6+ months’ contract

Qualifications:
• Work duties will include creating new or modifying existing drawings based on engineering sketches and drawing markups to conform with all of standards and requirements.
• Performing walk downs of projects to verify details will be required. Additional duties would include incorporating 'As Built' edits, new drawings and other design changes into the existing Facility Drawing Set, and scanning and digitizing existing paper drawings for digital.
• Perform configuration management and drawing release functions.
Basic Qualifications:
• A minimum of 5 years of professional drafting experience.
• Experience with drafting electrical, mechanical and structural designs.
• Experience working independently and in a team environment.
• Proficient knowledge in Microsoft Office Suite.
• The selected candidate must have excellent communication, writing and oral skills and have the ability to work with a wide range of team members.
• Have mastery of AutoCAD drawing program.
• Ability to read and interpret mechanical and electrical drawings and logic diagrams
 
Job Number: 19-04583
Job Location: Vandenberg AFB, CA
Rate: Hourly Rate
Per Diem: No
Overtime: Yes
Duration: 06 Months
Start Date: ASAP
Input Date: 08/07/2019
Last Updated: 09/06/2019
Firm Name: AGREEYA SOLUTIONS
Attention: Sourabh Soni
Address: 605 COOLIDGE DR STE 200
City, State: FOLSOM, CA 95610
Phone: 916/294-0075
Website: www.agreeya.com

Design Engineer Sr

Description:
Chipton-Ross is seeking a Design Engineer Sr for an opportunity in Littleton/Waterton, CO

RESPONSIBILITIES:
Candidate will be responsible for Printed Circuit Board (PCB) design and documentation utilizing Zuken CR-8000 software. Must be able to interface efficiently with mechanical and electrical stakeholders. Effort will consist of simultaneous oversight of multiple cards as they progress through schematic capture, PCB placement and routing, and the creation of fabrication and assembly documentation. Completed PCB designs will be subject to review by the Producibility team to ensure future manufacturing issues are kept to a minimum. Unique design requirements will be communicated at the start of the design effort and the designer will confirm successful incorporation of the requirements during multiple design reviews.

REQUIRED EXPERIENCE:
Experience with layout and routing in Zuken CR-8000 Demonstrated PWB or PCB design cycle experience. Basic knowledge of PWB or PCB design and fabrication as documented in industry standards.

PREFERRED EXPERIENCE:
-Experience with Downstream Blueprint for PCB fabrication and assembly drawing creation. -Experience designing space electronics. -RF layout and routing experience. -High speed digital/mixed signal routing experience. -Rigid-flex layout experience. -Basic understanding of PCB fabrication and assembly processes. -IPC CID certification and familiarity with IPC-2221/2222 and IPC-6012. -Experience with interfacing with PWB manufacturers. -Experience with training new designers. Experience with schematic capture, PWB layout and routing, assembly drawing creation and processing design packages through final release. -Basic understanding of electrical engineering concepts as applied to PCB/CCA design and assembly.

EDUCATION:
Accredited Bachelor's degree from an accredited college in a related discipline, or equivalent experience/combined education, with 5 years of professional experience; or 3 years of professional experience with a related Master's degree.

WORK HOURS:
Full-Time, 9/80

 
Job Number: 180156
Job Location: Littleton/Waterton, CO
Rate: Up to $52.11 DOE
Duration: 6 MONTHS
Input Date: 07/02/2019
Last Updated: 10/17/2019
Firm Name: CHIPTON ROSS
Attention: Patrick Costello
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: pcostello@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Designer / Drafter

Description:
Location: Burnsville, MN
Rate: $39.00/HR
Duration: 6 month contract
Shift: 1st Shift
Overtime: Possible
Per Diem Split/Relocation Help: No

****MUST be a U.S. Citizen or Permanent Resident****
****MUST have a Associate's Degree****

Job Description:
1. Manages highly complex drafting and design of assembly drawings based on layouts, sketches and blueprints.
2. May include utilization of computer aided design applications.
3. Applicants must have good CAD drawing and change order drafting skills.
4. Mechanical Drafter/Designers must have CREO2 experience.
5. Electrical Drafter/Designers must have experience with Cadence/allegro 17.2 or higher.

Education:
1. Associate's Degree
2. Must have 2+ years of experience with CREO 2 or Cadence/Allegro 17.2 or higher.
 
Job Number: 11188
Job Location: Burnsville, MN
Rate: $39.00/HR
Per Diem: No
Overtime: Possible
Duration: 6 mos
Input Date: 07/16/2019
Last Updated: 08/13/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Designer / Drafter

Description:
Location: Burnsville, MN
Rate: $39.00/HR
Duration: 6 month contract
Shift: 1st Shift
Overtime: Possible
Per Diem Split/Relocation Help: No

****MUST be a U.S. Citizen or Permanent Resident****
****MUST have a Associate's Degree****

Job Description:
1. Manages highly complex drafting and design of assembly drawings based on layouts, sketches and blueprints.
2. May include utilization of computer aided design applications.
3. Applicants must have good CAD drawing and change order drafting skills.
4. Mechanical Drafter/Designers must have CREO2 experience.
5. Electrical Drafter/Designers must have experience with Cadence/allegro 17.2 or higher.

Education:
1. Associate's Degree
2. Must have 2+ years of experience with CREO 2 or Cadence/Allegro 17.2 or higher.
 
Job Number: 11137
Job Location: Burnsville, MN
Rate: $39.00/HR
Per Diem: No
Overtime: Possible
Duration: 6 mos
Input Date: 06/26/2019
Last Updated: 08/26/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Development Engineer

Description:
The Product Development and Releasing Coordinator is responsible for coordinating the development and validation efforts of the electric vehicle power electronics and electrified vehicle systems/devices for passenger cars and trucks. The Engineer will be responsible for develop efficient and cost effective power electronics using cutting edge technologies, the latest test and evaluation equipment/laboratory, and robust simulation tools. Coordinate with test facilities, cross functional teams, such as dyno, bench, vehicle, integration team, calibration team and the suppliers on power electronic devices DVP & R. Work with supplier and internal component logistics.  Coordinate and carry out all required development/validation testing to ensure achievement of all functional objectives and assure compliance to program goals.  Report or present progress and status to the validation and development in management review meetings.

 

 
Requirements:
* Bachelor of Science in Electrical Engineering
* Minimum of 2 years' experience in electronics and circuit design and/or development
* Have understanding of power electronics and devices
* DVP&R and DFMEA creation & execution experience
* Great communication skills
* Strong project management and time management skills
* Good analytical and problem solving skills
* Understanding of Electrical Engineering standards/protocols, and of power electronics/devices * Highly motivated and self-starter
* Demonstrated ability to work in a team environment
 
Preferred Qualifications:

* Master of Science in Electrical Engineering
* 2-5 years of experience
* Power electronics / electrical models, simulation experience, and FEA
* Power electronics specifications expertise
* Electric motor & powertrain controls experience
* Design and release experience
* Strongly prefer previous hybrid / high voltage experience
* Experienced with supplier program management.
 

 
Job Number: 1910103069
Job Location: Auburn Hills, MI
Duration: 12 months
Input Date: 06/12/2019
Last Updated: 10/17/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Katie Windhurst
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033jyUQAQ&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ECAD Librarian/Engineer

Description:
Perform Electronic Component ECAD/PCB/EDA librarian tasks supporting programs in the proposal and production phases. Interfacing with National ECAD Library team, ECAD/PCB Layout Design Engineers, Product Development Engineers, Component Engineers, Program Management, Engineering and project leads, external electronic component manufacturers and other related disciplines. The majority of this position will be to create ECAD/PCB/EDA library elements including electronic schematic diagram symbols and PCB footprint cells using the Mentor Graphics Expedition/xDM tool suite utilizing vendor datasheets as well as industry and company standards.
Education requirement: Bachelors Degree in Electrical, Industrial, or Computer Engineering. We will consider candidates with Associates Degree and relevant/related experience.
Hiring at 2 locations: McKinney, TX or El Segundo, CA
 
Job Location: McKinney, TX, TX
Rate: up to $35/hr
Per Diem: Split
Overtime: Possible
Duration: 6 months
Start Date: 9/2/2019
Input Date: 08/07/2019
Last Updated: 08/28/2019
Firm Name: MIDCOM CORPORATION
Attention: Lavie Lam
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

ECS System Engineer - UM

Description:
PDS Tech Inc is seeking a ECS System Engineer - UM in Wichita, KS

Job Responsibilities:
 JOB RESPONSIBILITIES:
• Authoring System Safety Reports including Aircraft and System Functional Hazard Assessments, Common Mode Analysis, and Zonal Safety Analysis.
• Assisting authors with Preliminary System Safety Assessments, and System Safety Assessments. This includes supporting FMEA, fault tree analysis, qualitative and quantitative analysis, etc.
• Provide support for ODA Unit Member making findings of compliance for the FAA in the above areas or make finding of compliance as an ODA Unit Member.
• Assist systems design and engineering teams in ensuring all aspects of 23/25.1309 compliance are addressed including reviewing certification plans and supporting reports.

EDUCATION / EXPERIENCE:
• B.S. or advanced degree in Aeronautical, Mechanical, or Electrical Engineering, Physics, Math, Statistics or related technical degree required
• Minimum 7 years of experience in General Aviation or Business Aircraft development programs



 
 



 
JOB QUALIFICATIONS:
• Experience in System Safety/Reliability and/or aircraft mechanical, avionics or electrical systems design and/or certification is desired.
• Experience with domestic and foreign aircraft certification process is desired.
• Knowledge of the safety assessment processes outlined in AC 23.1309-1D SAE ARP 4761/4754A and the draft version of AC 25.1309 is desired.
• A working knowledge of DO-178 & DO-254 is desired.
• Experience in system assessment using modeling tools such as Failure Modes and Effect Analysis (FMEA), (Failure Modes and Effect Criticality Analysis (FMECA), Reliability Block Diagram (RBD), and Fault Trees Analysis (FTA) is desired.
• Ability to use Reliability Workbench (Fault Tree+) is desired.
• Experience with fault tree modeling tools such as Fault Tree+, Relex, and CAFTA is desired.
• Experience with Microsoft Office software application and working environment is required.
• The candidate must be able to work in a team environment and be able to clearly communicate thoughts and ideas with peers, management, and certification authorities

 
Job Number: 1910097709
Job Location: Wichita, KS
Duration: 12 months
Input Date: 01/24/2019
Last Updated: 10/17/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Marjorie Santiago-Marquez
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002r9TgQAI&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EMBEDDED SOFTWARE ENGINEER

Description:
Job Description: As a Software Engineer, you are responsible for developing new software products, implementing modern software design principles and concepts, resolving complex technical software problems, and providing solutions which are innovative and ingenious.

You will work with a highly collaborative team in an Agile environment embracing a 'fail-fast' mentality (fail fast, fail often, react quickly and learn from every failure). You will engage with Product Owners, Technology Architects, QA and/or Automation team members on cross-functional activities to design, develop, and test cutting-edge software solutions. You will be expected to understand and coach technical concepts to those around you.

Joining Client's Software Engineering team will give you the opportunity to take on unique and mission-critical responsibilities while allowing you to shape your own career path and drive change.

This position is for a role supporting the Ground Software team that develops mission critical software used during launch vehicle manufacturing, preflight test, and launch countdown to prep our rockets for flight.

A Ground Software Engineer designs, develops, operates and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific and manufacturing systems. Applies the appropriate standards, processes, procedures and tools throughout the system development life cycle to support the generation of such engineering applications and products such as display systems, mechanical control systems and electrical control systems that are directly used to operate all our rockets. Interfaces with customers, suppliers, application users and other technical and support personnel.

Requirements
• Bachelor's degree or Master's degree in Computer Science, Computer Engineering or a related technical discipline
• 6 - 10 years of work experience
• Experience with Unix-based operating systems
• Experience with object-oriented designs and languages
• Experience with C/C++
• Experience with Software Configuration Management practices and tools such as Git
• Experience with software development practices including:
o Continuous Integration/Continuous Delivery (CI/CD)
o Agile Methodologies
o Test Driven Development (TDD)
o Design Principles

Preferred Qualifications
• 10+ years of work experience
• Technical leadership experience in a Software Engineering environment
• Experience with Python
• Experience with HW/SW Integration
 
Job Number: 19-06180
Job Location: Centennial, CO
Rate: Hourly Rate
Duration: 12 months
Start Date: ASAP
Input Date: 07/17/2019
Last Updated: 08/15/2019
Firm Name: AGREEYA SOLUTIONS
Attention: Avijit Sharma
Address: 605 COOLIDGE DR STE 200
City, State: FOLSOM, CA 95610
Phone: 916/294-0075
Website: www.agreeya.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EMBEDDED SOFTWARE ENGINEER

Description:
Job Description: As a Software Engineer you are responsible for developing new software products, implementing modern software design principles and concepts, resolving complex technical software problems, and providing solutions which are innovative and ingenious.

You will work with a highly collaborative team in an Agile environment embracing a 'fail-fast' mentality (fail fast, fail often, react quickly and learn from every failure). You will engage with Product Owners, Technology Architects, QA and/or Automation team members on cross-functional activities to design, develop, and test cutting-edge software solutions.

Joining Client's Software Engineering team will give you the opportunity to take on unique and mission-critical responsibilities while allowing you to shape your own career path and drive change.

This position is for a role supporting the Ground Software team that develops mission critical software used during launch vehicle manufacturing, preflight test, and launch countdown to prep our rockets for flight.

A Ground Software Engineer designs, develops, operates and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific and manufacturing systems. They apply the appropriate standards, processes, procedures and tools throughout the system development life cycle to support the generation of engineering applications and products such as display systems, mechanical control systems and electrical control systems that are directly used to operate all our rockets. Ground Software engineers interface with customers, suppliers, application users and other technical and support personnel to produce high quality software that meets stakeholder needs.

Requirements
• Bachelor's degree or Master's degree in Computer Science, Computer Engineering or a related technical discipline
• 2 - 6 years of work experience
• Experience with Unix-based operating systems
• Experience with object-oriented designs and languages
• Experience with C/C++
• Experience with Software Configuration Management practices and tools such as Git

Preferred Qualifications
• Experience with Python
• Experience with software development practices including:
• Continuous Integration/Continuous Delivery (CI/CD)
• Agile Methodologies
• Test Drive Development (TDD)
• Design Principles
 
Job Number: 19-06182
Job Location: Centennial, CO
Rate: Hourly Rate
Duration: 12 months
Start Date: ASAP
Input Date: 07/17/2019
Last Updated: 08/15/2019
Firm Name: AGREEYA SOLUTIONS
Attention: Avijit Sharma
Address: 605 COOLIDGE DR STE 200
City, State: FOLSOM, CA 95610
Phone: 916/294-0075
Website: www.agreeya.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EMBEDDED SOFTWARE ENGINEER

Description:
Job Description: As a Software Engineer you are responsible for developing new software products, implementing modern software design principles and concepts, resolving complex technical software problems, and providing solutions which are innovative and ingenious.

You will work with a highly collaborative team in an Agile environment embracing a “fail-fast” mentality ( fail fast, fail often, react quickly and learn from every failure ). You will engage with Product Owners, Technology Architects, QA and/or Automation team members on cross-functional activities to design, develop, and test cutting-edge software solutions. You will be expected to understand and coach technical concepts to those around you.

Joining Client's Software Engineering team will give you the opportunity to take on unique and mission-critical responsibilities while allowing you to shape your own career path and drive change.

This position is for a role supporting the Ground Software team that develops mission critical software used during launch vehicle manufacturing, preflight test, and launch countdown to prep our rockets for flight.

A Ground Software Engineer designs, develops, operates and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific and manufacturing systems. They apply the appropriate standards, processes, procedures and tools throughout the system development life cycle to support the generation of engineering applications and products such as display systems, mechanical control systems and electrical control systems that are directly used to operate all our rockets. Ground Software engineers interface with customers, suppliers, application users and other technical and support personnel to produce high quality software that meets stakeholder needs.

Requirements
• Bachelor's degree or Master's degree in Computer Science, Computer Engineering or a related technical discipline
• 4-8 years of work experience
• Experience with Unix-based operating systems
• Experience with object-oriented designs and languages
• Experience with Software Configuration Management practices and tools such as Git (preferred), SVN, or Perforce
• Experience with one or more of the following:
-Real Time Operating Systems like RTEMS, RTLinux, QNX, LynxOS, etc.
-Embedded solutions with timing and memory constraints
-Communication protocols, including Ethernet, Serial, MIL-STD-1553
-Software Model Development of Avionics and Physical Systems
-Microprocessors
-Modern web application development and tech stack, including REST APIs
-Microservices architecture
-Developing device drivers
-Hardware - software integration

Preferred Qualifications
• Experience leading in a Software Engineering environment.
• Experience presenting software architecture and designs to both internal audiences as well as external customers
• Experience working with UML
• Real-time, 6 degree-of-freedom, motion sim***tion experience
• Cloud Deployment (AWS)
• Experience with one or more of the following languages:
-C/C++
-Python
-Java
-Javascript
• Experience with software development practices including:
-Continuous Integration / Continuous Delivery (CI/CD)
-Agile Methodologies
-Test Driven Development (TDD)
-Design Principles
 
Job Number: 19-06181
Job Location: Centennial, CO
Rate: Hourly Rate
Duration: 12 months
Start Date: ASAP
Input Date: 07/17/2019
Last Updated: 08/15/2019
Firm Name: AGREEYA SOLUTIONS
Attention: Avijit Sharma
Address: 605 COOLIDGE DR STE 200
City, State: FOLSOM, CA 95610
Phone: 916/294-0075
Website: www.agreeya.com

EWIS Expert

Description:
Legacy Engineering, a division of PDS Tech, is seeking candidates for EWIS Expert for the Regional Jet Development Program. 
This position is located in Nagoya, Japan.  

As a global engineering expert in aircraft Electrical Wiring Interconnection Systems, you will coordinate with contracted suppliers, interface with all other aircraft functions and engineering teams to coordinate and obtain the approval of any task assigned contributing to the aircraft System development and Certification;
 
Scope of Work:
         Work as Global engineering expert as part of the EWIS team
         Basic work scope is to participate in the development and finalization of the aircraft T/C design, compliant to all applicable requirements.
         This activity includes:



  • Evaluating the current aircraft design, with respect to compliance to the EWIS related airworthiness regulations of JCAB, FAA and EASA,
  • Coordinate activities related to defining the ESSDs required to generate wiring diagrams
  • Support verification and showing-compliance activities, such as Ground and Flight Tests, Design Reviews, Inspections, Analysis, etc.
  • Coordinating integration of design change activities originated from EWIS requirements when required, run unit base and manage aircraft level changes for EWIS group
  • Responsible for tasks required to perform above activities are considered within work scope; initiating/ reviewing related documents, technical calculation, interface discussions with the team members and all the other stakeholders including systems, structures, manufacturing, customer support, and partners.
  • Coaching and Education of company members about professional knowledge in the EWIS domain.
  • Interface with other suppliers as appropriate.
  • Provide technical expertise and assist in resolving the EWIS issues during any rig testing or flight testing.
     


 



 
Job Number: 1710075244
Job Location: Nagoya,
Duration: 12 months
Input Date: 03/16/2018
Last Updated: 10/17/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000023L1VAAU&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer Military Wire Harness

Description:
*This is a full time, 8 month contract, located in Palmdale, CA*



We are hiring for an Electrical Design Engineer specialized in designing and testing wire harnesses and routings for military, especially aircraft. The candidate will be crating wire assembly and harness diagrams, configuring proper routings, working around issues that arise including integration issues, ECOs and last minute changes to specifications. The role will also require that design be self checked by contractor as no Checkers will be assigned to contract. Environment will require heavy interface with production line technicians, engineers, etc. and working with Termination Aids, routing documents and master sketches.



Required:
*9 years’ experience in electrical military aircraft design 3D software.

*Experience with ANSI/ASME Y14.100 or similar design/drafting standards
*Experience reading and creating electrical drawing schematics for wire harness assemblies

*Wiring implementation and test experience
*Per diem split is available for those travelling for this position
*Active Secret Clearance (and recently investigated within the last 5 years)
*May need to work 2nd and weekend shifts if needed (in addition to 1st shift)



Plus:

*Catia V5 knowledge
 
Job Number: 158
Job Location: Palmdale, CA
Rate: DOE
Per Diem: yes split
Input Date: 07/25/2019
Last Updated: 09/06/2019
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

Electrical Design Engineers -- 20+ Openings

Description:
Needed Now!

-Wire harness and cable installation
-CATIA V5 or Mentor Graphics or NX
-CEEDS

Long-term openings in Oklahoma and Missouri

Sign-on bonus
 
Job Location: OK/MO
Input Date: 09/06/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann Mc Carthy or Ken Brownsher
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Email: mmccarthy@pdstech.com; kbrownsher@pdstech.com
Website: www.pdstech.com

Electrical Design Engineers -- 20+ Openings

Description:
Wire harness and cable installation; NX or CATIA V5 or Mentor Graphics
 
Job Location: Midwest
Input Date: 09/06/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann Mc Carthy or Ken Brownsher
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Email: mmccarthy@pdstech.com; kbrownsher@pdstech.com
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Designer ( Dulles, VA ) 9376347

Description:
Electrical Designer ( Dulles, VA ) 9376347
6 month Contract

Design of printed wiring boards using Cadence Allegro. Experience reading and generating electrical schematics. Experience with PWB fabrication drawings.
Team: Typically supporting a group of four, consisting of an Electrical Engineer, Electronics Packaging Engineer, Manufacturing Engineer and Mechanical CAD Designer in the development of the PWB design.
Design of printed wiring board (PWB) using Cadence Allegro. Working closely with Electrical Engineer to document and update electrical schematics.
Designs components or portions of systems and modifies existing designs to develop or improve products and facilitate manufacturing operations. Utilizes computer-aided design equipment and/or graphic tools such as, CAD. Gathers information, makes studies, computes calculations, and prepares original rough layouts, sketches to present design proposal. Coordinates design criteria with engineering, manufacturing, tooling, material, and planning group such as ease of manufacture, availability of materials, and contractual specifications.

•Cadence Allegro EDM experience preferred
•Experience with Constraint Manager Preferred
•Experience reading and generating electrical schematics
•Experience with PWB fabrication drawings
 
Job Number: 9376347
Job Location: Dulles, VA
Rate: Open
Per Diem: Yes
Overtime: yes
Duration: 6 Months
Start Date: ASAP
Input Date: 08/08/2019
Last Updated: 08/15/2019
Firm Name: TALENTPRO CONSULTING
Attention: Tim Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Work with Electrical and Mechanical Engineers to design and document company’s products while following established design and documentation standards.
Translate concept drawings, wiring diagrams, verbal descriptions, and sketches into detailed electrical and/or models and drawings in support of specific program tasks including
electrical bundle routing in the spacecraft
l
Efforts will include assessment structural, environmental, and manufacturability considerations, including tolerance evaluation to reduce costs and schedule impact for all design
efforts, while ensuring compliance with NASA and SNC standards or best commercial practices (as appropriate) as well as contractual requirements.
l
l Develop harness bundle assembles using Siemens NX11 Electrical Harness Module and data / intelligence imported from Siemens Mentor Graphics Capital Logic.
l Develop light weight secondary structures and harness support bracket parts that comply with both mechanical and electrical requirements for the specific applications.
Will generate and launch Engineering Change Orders (ECO) and Engineering Change Notifications (ECNs), with associated documentation, into a Configuration Management (CM)
system (i.e. Windchill).
 
Job Location: CO
Input Date: 08/07/2019
Firm Name: JOHNSON SERVICE GROUP
Address: 1600 AIRPORT FWY STE 400
City, State: BEDFORD, TX 76022-6871
Phone: 817/545-4009
Fax Phone: 817/545-2006
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
1) AutoCad required, Catia V5 and CHS preferred. 2) GV,GVI, electrical system design experience preferred. 3) 14 CFR 25 Subpart H - EWIS experience preferred 4) Part 25 Certification Experience for Cabin Interiors preferred 5) Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems. 6) Experience with power distribution, lighting, switching, sizing and routing. 7) Familiarity in mechanical system design 8) Familiarity with aircraft STC procedures preferred. 9) Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Principle Duties and Responsibilities:

Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred
The level of technical skill and abilities appropriate for this grade will be established by each discipline


The Structures Company is an AA/EOE.
 
Job Number: 318
Job Location: GA
Rate: $55-$63/Hr. DOE
Per Diem: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 07/31/2019
Last Updated: 09/21/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Electrical Engineer

Lexington, KY
$40/hr - $68/hr (DOE)
6 month W2 contract
First Shift
*MUST HAVE AN ACTIVE SECRET CLEARANCE*

Job Description:
Researches, develops, designs, and tests electrical components, equipment, and systems. Designs electrical equipment, components, products, and systems for military aviation and/or ground vehicles. The applicant will be focused on the electrical wiring and harness assembly diagram design and development.

Duties include creating wiring diagrams and harness assembly diagrams, resolving wiring/integration related issues between the various avionics/electrical systems, validating/interpreting/troubleshooting/resolving any wiring related issues, and creates wire routing drawings. Candidate will be part of a team effort to develop aviation and/or ground vehicle wiring from design to installation, to include liaisoning between Electrical Design and Production/Manufacturing to ensure wiring requirements flow from design to installation are processed in accordance to specifications. Experience with AutoCAD and/or CATIA V5 required.

Aviation experience is preferred but the immediate need is for a ground vehicle project.
 
Job Number: 11104
Job Location: Lexington, KY
Rate: 40-68
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 06/14/2019
Last Updated: 09/03/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Electrical Engineer

Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Duration: Long Term Contract
Shift: 4x10
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
1. AutoCad required, Catia V5 and CHS preferred.
2. GV, GVI, electrical system design experience preferred.
3. 14 CFR 25 Subpart H - EWIS experience preferred
4. Part 25 Certification Experience for Cabin Interiors preferred
5. Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
6. Experience with power distribution, lighting, switching, sizing and routing.
7. Familiarity in mechanical system design
8. Familiarity with aircraft STC procedures preferred.
9. Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required

Education and Experience Requirements:
1. Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
1. Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

Principle Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
2. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 11060
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 06/10/2019
Last Updated: 10/07/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Electrical Engineer

Description:
Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
Unique Skills:
1) AutoCad required, Catia V5 and CHS preferred.
2) GV,GVI, electrical system design experience preferred.
3) 14 CFR 25 Subpart H - EWIS experience preferred
4) Part 25 Certification Experience for Cabin Interiors preferred
5) Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
6) Experience with power distribution, lighting, switching, sizing and routing.
7) Familiarity in mechanical system design
8) Familiarity with aircraft STC procedures preferred.
9) Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
 
Job Number: 374101
Job Location: Savannah, GA
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 06/06/2019
Last Updated: 10/17/2019
Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

Electrical Engineer

Description:
PDS Tech, Inc. is seeking an Electrical Engineer in Auburn Hills, MI.

Summary:

  • Develop, validate and integrate the functionality of e-motor hub system, dynamic lean system, integrated display unit, and sensors.
  • In charge to integrate the software platform for infotainment, vehicle performance monitoring, torque and power distribution
  • Development of the powertrain sensors and controllers
  • Development of the strategy for the dynamic lean system; step by step electrical motor to balance the vehicle under specific conditions and loads
  • Lighting/signals subsystem development

Qualifications/Education:
  • Bachelor’s degree in Electrical or Mechanical Engineering.
  • 5+ years’ experience and capability to work with various data acquisition tools.
  • 5+ years’ experience with Matlab or equivalent tools.
  • 5+ years’ experience with sensor development.
  • 5+ years’ experience with controls.
  • Strong mechanical understanding or Mechanical engineering background with strong electrical understanding is preferred.
  • Must be able to manage multiple concurrent assignments with proper prioritization.
  • Excellent interpersonal and collaborative skills are necessary to be successful in this position.
  • Proactive approach to evaluate efficient and innovative solutions even to quickly troubleshoot urgent situations.

 
Job Number: 1910102060
Job Location: Auburn Hills, MI
Duration: 12 months
Input Date: 05/09/2019
Last Updated: 10/17/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Katie Windhurst
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033gjUQAQ&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Location: Palmdale, CA
Rate: $70.00 - $120.00/HR
Duration: 5 month contract
Shift: 1st Shift
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

Job Description:
- Designs and tests Electrical system, components, equipment, and networks for Military air vehicle.
- The applicant must have extensive experience in Wiring Harness Design, Build, and Test.
- Considered a Subject Matter Expert (SME) in the area of Harness Design and Build.
- Experience with System Integration of Hardware in a simulation test environment is desired.
- Able to evaluate electrical wiring and harness assembly diagram for build and integration.
- Candidate will be part of a team effort to develop wiring from design to installation, to include interfacing between Electrical Wiring Design and Production/Manufacturing to ensure wiring requirements flow from design to installation are processed in accordance to Company Specifications.
- Make real-time design modification to resolve issues, and update design documents to reflect changes.
-Able to work in a Shop (Prototype) environment and with interacting with technicians.

Duties include:
- Creating wiring diagrams and harness assembly diagrams
- Resolving wiring/integration related issues between the various avionics/electrical systems
- Validating/interpreting/troubleshooting/resolving any wiring related issues
- Performing technical checks to ensure wiring document correctness
- Providing engineering sign-off on all new/revised manufacturing wiring documents
- Termination Aids (TAs) and Wire Harness Master (WHM) sketches

Education:
- Level 3: BS + 9-15 years exp. or MS + 7-13 years exp.
- Experience with Design, Implementation and Test experience with aircraft harnesses required.
 
Job Number: 10234
Job Location: Palmdale, CA
Rate: $70.00 - $120.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 5 mos
Input Date: 04/22/2019
Last Updated: 09/10/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Electrical Engineer

Description:
Chipton-Ross is seeking a Electrical Engineer 2 for an opening in Avondale, LA.

RESPONSIBILITIES:
Candidate will be responsible for establishing, overseeing, and managing all activities related to assigned shipboard systems. Candidate will perform the following: Research, development, and design of electrical components, equipment, systems, and networks in accordance with all contractual requirements, military and commercial specifications; initiate procurement specifications; review and approve vendor proposals; review, comment on, adjudicate and approve vendor furnished information for translation into construction products; interface with vendors and Navy technical representatives; support vendor design reviews and testing; develop drawings and other documents IAW Mil-Specs and contract drawings; interface with other disciplines and departments to ensure a seamless integration of assigned systems into the shipboard environment; address and resolve technical issues, and make decisions on problems in his/her area of responsibility; support shipbuilding production department as required.

REQUIRED EXPERIENCE:
Bachelor's of Electrical Engineering with two years of engineering experience or Master's of Electrical Engineering with no prior experience, or similar degree background. . Previous shipbuilding experience is highly desired. A qualified candidate should be proficient in Microsoft Office applications and AutoCAD 2014.

ADDITIONAL EXPERIENCE:
It is preferred that the candidate be familiar with shipboard Interior Communications systems such as Switchboards, Telephone systems, Announcing, TV and Audio, Alarms, Indicating, etc. and have an understanding of the typical shipboard interfaces, interconnections, and integration requirements. Familiarity with electrical power distribution systems, control systems, and C4ISR systems is a plus. Current clearance is also a plus.

EDUCATION:
Bachelor's of Electrical Engineering

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 155942
Job Location: Avondale, LA
Rate: $42 to $46.00 DOE
Duration: 1 year
Input Date: 06/03/2016
Last Updated: 10/17/2019
Firm Name: CHIPTON ROSS
Attention: Andrew Craft
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: acraft@chiptonross.com
Website: www.chiptonross.com

Electrical Engineer (2) - SC

Description:
Chipton-Ross is seeking 2 Electrical Engineers located in Greenville, SC

RESPONSIBILITIES:
looking to fill an Electrical Engineer position within the Design & Integration skill set to support an Avionics Upgrade (CNS/ATM) project.
The ideal candidate will be responsible for providing electrical engineering avionics designs in support of CNS/ATM upgrade on a C-130H aircraft. This includes development/design of block diagrams, wiring diagrams, and cable assemblies for avionics system installations.

REQUIRED EXPERIENCE:
Experience developing ground and flight test procedures and assisting the production team as required during installation and test is also required.
"Must be experienced with Engineering design software for electrical design.
"Ability to understand schematics, generate interconnect diagrams and troubleshoot equipment installations
"Experience with aircraft architectures and electrical integration of avionics subsystems

EDUCATION:
Accredited Bachelor's Degree in Electrical Engineering or equivalent design experience with at least 10 years of electrical design.

WORK HOURS:
Full-Time/First Shift 0630-1600

 
Job Number: 176357
Job Location: Greenville, SC
Rate: $DOE
Duration: 12 MONTHS
Input Date: 04/04/2019
Last Updated: 10/17/2019
Firm Name: CHIPTON ROSS
Attention: Patrick Costello
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: pcostello@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer (Power Systems)

Description:
In this role, you will provide design support for new power conversion product developments and existing product upgrades. Use appropriate electrical analyses to evaluate design options and to ensure that design requirements will be met. Assist in the construction and testing of prototypes and qualification test units. Communicate effectively with internal and external customers.
Assisting in the development and design of Military electronic systems and sub-systems Assisting in the performance of both design evaluation/verification and qualification/validation testing of electronic and power electronic systems Troubleshooting existing designs and generating creative design improvements Performing analysis of test data and recommending design changes Verifying design through the use of software simulation tools (PSpice, Matlab Simulink, etc.) Thoroughly documenting and explaining test plans, results, and analysis to peer reviewers, internal and external customers Participating in test-to test specification and reliability qualification tests Participating in brainstorming sessions to create new products and technologies

REQUIRED EXPERIENCE:
Knowledge of systems simulation tools such as PSpice, Matlab, etc.
Strong interpersonal and communication skills Ability to handle multiple tasks in a fast-paced, constantly changing environment Familiarity with a manufacturing environment Ability to work independently to assemble and test engineering models, printed circuit boards and prototypes using the latest tools and instrumentation

PREFERRED EXPERIENCE:
Familiar with designing for EMI/EMC a plus Digital, magnetics and power conversion experience a plus

EDUCATION:
Accredited BS Degree in Electrical Engineering with at least 5 years of experience in power electronic design and military electronics design

WORK HOURS:
9/80, 1st Shift
Full-Time
 
Job Number: 180849
Job Location: Philadelphia, PA
Rate: $40-42/hour
Per Diem: n/a
Overtime: Not specified
Duration: Contract
Start Date: ASAP
Input Date: 08/07/2019
Firm Name: CHIPTON ROSS
Attention: Terry Jones
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Avionics System

Description:
-LOCATION PACIFIC NORTH WEST-
Design, develop and integrate products, tools and or systems
• Perform testing and analysis to validate designs
• Prepare specifications, and assist with the development of processes
• Perform research, and prepare documentation, reports, procedures and tests
• Collect and correlate data, recognizing discrepancies in results
• Perform project execution from conception to completion
• Support portions of projects being performed by co-workers
• Create and update electrical drawings
• Address parts obsolescence and upgrades
• Bachelor of Science degree in electrical engineering from an accredited university (or equivalent experience)
• Catia/CAD proficiency required
• Aircraft design and avionics systems
• General understanding of how systems interact in a small aircraft
• Demonstrated ability to learn new technical areas and skills to support multiple projects
• Ability to consistently demonstrate respect and support of our company vision, mission and values
 
Job Number: 999898
Job Location: PACIFIC NORTH WEST, PACIFIC NORTH WEST
Rate: open
Per Diem: possible
Overtime: possible
Duration: Long Term
Start Date: ASAP
Input Date: 06/07/2019
Last Updated: 09/26/2019
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Clearance CA

Description:
165775
Job Title: Electrical Engineer

Work Site Address: Palmdale, CA 93599
Job Number: 1708-1
Max Pay Rate: $78.00/hr
Start Date: 7/6/2019
End Date: 1/10/2020
Position Type: Contract


Job Summary:
Looking for world-class talent in engineering to join the 75 year tradition of creating advanced aircraft. This position requires a Signals Intelligence (SIGINT) Engineer to use their technical, program, and systems expertise to design, develop, integrate, and qualify systems for advanced aircraft. The candidate will define specifications, system integration and troubleshooting, and perform aircraft checkout procedures. The candidate must be effective working in team environments, coordinating with multiple engineering disciplines internal and external. Strong verbal and writing skills are essential. The candidate must be able to interact with single or multiple Sensor Suppliers and direct tasking required for successful development and integration of a Sensor System.

Job Description:
i. Provide technical support to customer activities and programmatic processes
ii. Develop documents and briefings to communicate work or study status, brief Program Management as required
iii. Provide task-based schedule and resource forecasts
iv. Subcontract management experience
v. Develop Concept of Operations (CONOPS) for new capabilities and coordinate them across the affected organizations
vi. Assist in the development of system level, functional level and interface requirements
vii. Identify gaps between requirements and acquisition program capabilities being conducted by the customer
viii. Manage the Request for Change (RFC) process as it relates to closing requirement gaps
ix. Work with the enterprise architects to update related design documents to identify, clarify, and track task requirements and issues, remove barriers, resolve minor project issues and escalate to immediate manager where required

Qualifications and Education Requirements
BS+16 YRS or MS+14 YRS

Systems integration experience
Avionics Experience

Qty 1 position needed
 
Job Number: JE-1708-1TS5
Job Location: Palmdale, CA
Rate: 78/hr
Duration: 6 months +
Input Date: 07/25/2019
Last Updated: 10/03/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Electrical Engineer - Clearance KY

Description:
165935
Job Title: Electrical Engineer

Work Site Address: Lexington, KY 40516
Job Number: 1927-1
Max Pay Rate: $68.00/hr
Start Date: 8/23/2019
End Date: 8/21/2020
Position Type: Contract

Job Summary:

Job Summary
As an Electrical Engineer, you will work as part of an engineering team based in Lexington, KY. The team is focused primarily on modifying existing hardware and integrating components into various platforms based on customer specifications. Your job will be to develop component and system designs based on customer requirements and interface control documents or other similar information. Your designs will comply with applicable military specifications, SAE, ANSI, ASME, and other related design and drafting standards. Upon design completion, you will be expected to support the fabrication, installation, and integration of your design by providing support to the manufacturing and installation workforce as required.

Education Requirements
Requires a BSEE from an accredited University.


Qualifications and Education Requirements
BS+3-5 YRS or MS+0-3 YRS

Qty 2 positions needed
 
Job Number: JE-1927-1S
Job Location: Lexington, KY
Rate: 68/hr max
Duration: 12 months
Input Date: 09/18/2019
Last Updated: 10/16/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Electrical Engineer - Level 2

Description:
Electrical Engineer - Level 2

Lexington, KY
$21.50/hr - $68/hr
1 year W2 contract
First Shift, 5/40
*MUST HAVE AN ACTIVE SECRET CLEARANCE*

Description:
As an Electrical Engineer, you will work as part of an engineering team based in Lexington, KY. The team is focused primarily on modifying existing hardware and integrating components into various platforms based on customer specifications. Your job will be to develop component and system designs based on customer requirements and interface control documents or other similar information. Your designs will comply with applicable military specifications, SAE, ANSI, ASME, and other related design and drafting standards. Upon design completion, you will be expected to support the fabrication, installation, and integration of your design by providing support to the manufacturing and installation workforce as required.
Requires a BSEE from an accredited University.
 
Job Number: 11310
Job Location: Lexington, KY
Rate: 45.00-68.00
Per Diem: Split Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 10/09/2019
Last Updated: 10/16/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: rex@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer / Catia AutoCAD - Clearance URGENT KY

Description:
165224
Job Title: Electrical Engineer
Job Category: Engineering

Work Site Address: Lexington, KY 40516
Job Number: 1681-1
Max Pay Rate: $68.00/hr
Start Date: 6/17/2019
End Date: 12/31/2019
Position Type: Contract


Researches, develops, designs, and tests electrical components, equipment, and systems. Designs electrical equipment, components, products, and systems for military aviation and/or ground vehicles. The applicant will be focused on the electrical wiring and harness assembly diagram design and development. Duties include creating wiring diagrams and harness assembly diagrams, resolving wiring/integration related issues between the various avionics/electrical systems, validating/interpreting/troubleshooting/resolving any wiring related issues, and creates wire routing drawings. Candidate will be part of a team effort to develop aviation and/or ground vehicle wiring from design to installation, to include liasoning between Electrical Design and Production/Manufacturing to ensure wiring requirements flow from design to installation are processed in accordance to specifications.

Qualifications and Education Requirements
BS+6-10 YRS or MS+4-8 YRS

Preferred Skills
Experience with AutoCAD and/or CATIA V5 required


Qty 1 position needed

Aviation experience is preferred but the immediate need is for a ground vehicle project.
 
Job Number: JE-1681-1S
Job Location: Lexington, KY
Rate: 68/hr max
Duration: 6 months
Input Date: 07/30/2019
Last Updated: 09/11/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Electrical Engineer / no clearance SC

Description:
164638/1659-1 Electrical Engineer
Need Date: A.S.A.P
Number of Openings 1
Length of Assignment Estimated one (1) year
Hourly Pay Rate: $58
Possible Temp to Hire? No
Shift, Start & End Time 1st: 0630-1600
Specific Work Location Greenville, SC



Job Description:
Greenville Operations, SC is currently looking to fill an Electrical Engineer position within the Design & Integration skill set to support an Avionics Upgrade (CNS/ATM) project.

The ideal candidate will be responsible for providing electrical engineering avionics designs in support of CNS/ATM upgrade on a C-130H aircraft. This includes development/design of block diagrams, wiring diagrams, and cable assemblies for avionics system installations. Experience developing ground and flight test procedures and assisting the production team as required during installation and test is also required.

Minimum Requirements:
(Education, years of experience, specific skills or tools, etc.)
• Bachelor's Degree in Electrical Engineering or equivalent design experience with at least 10 years of electrical design.

• Must be experienced with Engineering design software for electrical design.

• Ability to understand schematics, generate interconnect diagrams and troubleshoot equipment installations.

• Experience with aircraft architectures and electrical integration of avionics subsystems.
 
Job Number: JEG -1659-1
Job Location: Greenville, SC
Rate: 58/hr max
Per Diem: no
Duration: 12 months
Input Date: 10/01/2019
Last Updated: 10/16/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer / wiring harness - Clearance CA

Description:
1302-1 Electrical Engineer
Work Location: Palmdale, CA
Status: Open

Qty: 2
Desired Start Date: 4/30/2019
End Date: 9/27/2019

Job Description:
Designs and tests Electrical system, components, equipment, and networks for Military air vehicle. The applicant must have extensive experience in Wiring Harness Design, Build, and Test. Considered a Subject Matter Expert (SME) in the area of Harness Design and Build. Experience with System Integration of Hardware in a simulation test environment is desired. Able to evaluate electrical wiring and harness assembly diagram for build and integration. Duties include creating wiring diagrams and harness assembly diagrams, resolving wiring/integration related issues between the various avionics/electrical systems, validating/interpreting/troubleshooting/resolving any wiring related issues, performing technical checks to ensure wiring document correctness, providing engineering sign-off on all new/revised manufacturing wiring documents, Termination Aids (TAs) and Wire Harness Master (WHM) sketches. Candidate will be part of a team effort to develop wiring from design to installation, to include interfacing between Electrical Wiring Design and Production/Manufacturing to ensure wiring requirements flow from design to installation are processed in accordance to Aero Specifications. Make real-time design modification to resolve issues, and update design documents to reflect changes. Able to work in a Shop (Prototype) environment and with interacting with technicians.


Candidate will work first shift

Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
Pay Rate: $70.00 Hourly
 
Job Number: JE-1302-1S5
Job Location: Palmdale, CA
Rate: 70/hr max
Per Diem: no
Duration: 6 months +
Input Date: 07/12/2019
Last Updated: 08/19/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer 4

Description:
Unique Skills:
• AutoCad required, Catia V5 and CHS preferred.
• GV,GVI, electrical system design experience preferred.
• 14 CFR 25 Subpart H - EWIS experience preferred
• Part 25 Certification Experience for Cabin Interiors preferred
• Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
• Experience with power distribution, lighting, switching, sizing and routing.
• Familiarity in mechanical system design
• Familiarity with aircraft STC procedures preferred.
• Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required

Position Purpose:
Works on engineering projects containing critical problems, the solution of which requires major technological advances and extensive related development

Principle Duties and Responsibilities:
• Responsible for an entire engineering project of major complexity within established scope
• Makes technical decisions and recommendations that are recognized as authoritative and have an important impact on extensive engineering activities
• Applies advanced technical principles, theories and concepts based on broad expertise or unique specialized knowledge
• Leads the development of innovative principles and ideas
• Acts independently to determine improved methods and/or procedures to optimize technical product, cost and schedule requirements
• Works under consultative direction; uses independent judgment to accomplish objectives
• Develops standards and guides for diverse engineering activities
• Conceives and plans investigation of broad areas of importance for which engineering precedents are lacking in areas critical to the program Perform other duties as assigned.
• Advanced degree in engineering or related curriculum preferred.
• The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 24-362
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 08/23/2019
Last Updated: 09/16/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer II

Description:
• Senior FPGA Developers are responsible for the architecture and implementation of advanced Electronic Warfare algorithms in high performance FPGAs.
• These algorithms require the ability to take advantage of Xilinx/Intel specific architecture features in order to meet requirements in designs that require high-speed, large footprint FPGA components.
• Furthermore, these algorithms utilize Multi-Gigabit Interfaces such as PCIe and Gigabit Ethernet requiring the ability to implement and test COTS IP cores running on FPGA specific Transceiver components.
• Senior Designers are also required to develop simulation and lab functional testing in various software environments requiring familiarity with scripting and COTS test software.
• Direct experience using the latest versions of Xilinx Vivado and Intel Quartus for FPGA timing closure, placement and routing.
• Direct experience using Mentor Questasim for test bench development to verify FPGA requirements in simulation using self-checking test bench methodologies. Extensive, proven development results implementing complex signal processing algorithms for Electronic Warfare Radar Warning Receivers in FPGAs.

Key Responsibilities:

• Candidate will join an engineering organization focused on RF Electronic Warfare systems.
• Candidate will be responsible for applying advanced technical principles and concepts to architect and develop FPGA designs based on high level system requirements.
• Candidate will have the ability to present, explain, and refine architectural approaches in consultation with other product stakeholders.
• Candidate will have the ability to determine and follow the course of action necessary to implement finished products based on the architecture developed.
• Tasks will include development of Firmware Requirements Specifications for FPGA designs, VHDL/Verilog-based RTL and functional design, timing analysis, simulation, and integration of FPGA designs into hardware and with tactical software.
• Extensive experience in developing optimal FPGA architectures based on high level requirements.
• Experience with hardware/firmware/software integration and test using FPGAs and embedded processors Proficiency with VHDL/Verilog for configuring FPGAs Experience working in a system integration environment, verifying requirements and identifying and correcting defects.

Required Skills:

• Extensive experience with digital receiver implementation. Extensive experience with implementation of digital signal processing algorithms.
• Linux and / or Python scripting experience. Familiarity with Lab testing tools such as LabView and Matlab.
• Experience incorporating third party IP into FPGA designs, including PCIe and high-speed Ethernet. Experience with code coverage tools for evaluating test coverage.
• Good communication and presentation skills.

Required Education:

Bachelor of Science degree in Electrical Engineering, or Computer Engineering.
 
Job Location: Dallas, TX
Rate: up to $110/hr
Per Diem: Split
Overtime: Possible
Duration: 8 months
Start Date: ASAP
Input Date: 08/14/2019
Last Updated: 08/28/2019
Firm Name: MIDCOM CORPORATION
Attention: Lavie Lam
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Electrical Engineer II

Description:
Creo, new product design; PCB design, layout, and fabrication
 
Job Location: South
Input Date: 07/15/2019
Firm Name: PDS TECHNICAL SERVICES
Email: epetersen@pdstech.com
Website: www.pdstech.com

Electrical Engineer RF ( South Magna UT ) S9244486 and S9244486

Description:
Electrical Engineer RF ( South Magna UT ) S9244486 and S9244486
12 Month Contract

Pay Rate: $60-65/hr W2

Required: • Active Secret DoD Clearance within 5 ½ years of last investigation

This position will support electromagnetics and radio frequency (RF) testing. Working knowledge of RF testing of structures, antennas, radomes, and other aerospace related components is a must. The qualified applicant shall be able to perform data analysis and present findings to program engineering teams, be able to author or review RF test plans, and provide input to test fixture design, manufacturing, and set-up. Daily communication with management staff, program/Integrated Product Team (IPT) members, and customers is expected.

Requirements & Qualifications:
• Active Secret DoD Clearance within 5 ½ years of last investigation

B.S. in Electrical Engineering (ABET), specializing in RF / Electromagnetics; M.S. is desirable
o Minimum 5 years with B.S. or related experience, 3 years with M.S.
o Relevant experience in aerospace industry, with experience in testing and analysis of structures, conformal antennas/apertures, arrays, and Radomes
o Solid background in electromagnetics
o Working experience with test and evaluation of microwave devices
o Verification of antenna, radome, and structure performance through prototype fabrication, integration into test fixture(s), and testing
o Experience with commercial data analysis software, such as Knowbell and/or Pioneer o Familiarity with Computational Electromagnetic (CEM) tools
o Willingness to work cooperatively in a team
o Proficient in MS Office suite oExperience fostering and leading in a culture of continuous improvement
oExcellent verbal and written communication skills

Desired Skills and Experience:
• Working experience within various anechoic test chambers
• Ability to create software algorithms for design, optimization, and data analysis using tools such as MATLAB or FORTRAN
• Proficiency with Computational Electromagnetic (CEM) codes such as HFSS, FEKO, PMM, XPATCH, RAM2D, etc
 
Job Number: S9244486
Job Location: Magna, UT
Rate: Open
Per Diem: no
Overtime: yes
Duration: 12 months
Input Date: 10/08/2019
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Email: timmahaney@talentproconsulting.com
Website: www.talentproconsulting.com

Electrical Engineer-Power Distribution

Description:
This position will be responsible for process work for varied clients including LV/MV power distribution, combined heat and power unit integration, utility transmission and distribution on multiple projects of various sizes.
Facilities electrical power distribution schemes, grounding and lighting studies.
Industrial power plant electrical systems evaluation and design preferred; with related experience in chemical, petroleum and other industrial process plants acceptable
Development of construction document packages including required specifications and drawings that will be utilized for bidding and construction.
 
Bachelor of Science in Electrical Engineering required
10+ years of experience
Professional Engineer Registration preferred
Experience designing low voltage (<600V) and medium voltage (<15kV) electrical power distribution systems. >15kV a plus.
Experience developing electrical construction packages for industrial facilities a plus
CAD software knowledge a plus but not required
Experience using Power System Study software (such as EasyPower, SKM, or ETAP) a plus
Travel 10-15% of time
Detailed experience in the development and implementation of power process electrical systems required.

 
 
Job Number: 1910104725
Job Location: Appleton, WI
Duration: 6 months
Input Date: 07/30/2019
Last Updated: 10/17/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Timothy Glapa
Address: 110 PACKERLAND DR STE A
City, State: GREEN BAY, WI 54303
Phone: 920/499-9943
800 Phone: 800/333-1389
Fax Phone: 920/499-9067
Email: cecjgreenbay@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GUeAQAW&URLSource=cjhunter

Electrical Engineering Test Tech

Description:


PRIMARY FUNCTION:
The Electrical Engineering Test Technician will perform configuration and acceptance testing of complex electronic systems/assemblies, by applying principles and theories of electronics, electrical circuitry, engineering mathematics, electronic and electrical testing.
This position follows a 4x10 compressed workweek schedule.
JOB DUTIES:
 
  • Test product, using standard test equipment and procedures, and analyze results to evaluate performance and determine need for adjustment.
  • Assemble, test, and maintain circuitry or electronic components according to engineering instructions, technical manuals, and knowledge of electronics, using hand and power tools.
  • Read schematic drawings and engineering instructions for assembling electronics units, applying knowledge of electronic theory and components.
  • Adjust and replace defective or improperly functioning circuitry and electronics components, using hand tools and soldering iron.
  • Maintain documentation of testing and equipment operation.



 



 





 



BASIC QUALIFICATIONS:
 
  • Ability to read and interpret schematics, assembly drawings, procedure manuals, parts lists and wire data lists.
  • Knowledge of analog and digital symbol identification
  • Knowledge of test practices and procedures.
  • Personal computer skills required to configure and load software
  • Ability to operate test equipment such as: ohmmeters, digital voltmeters, generators, counters, oscilloscopes, and personal computers.
  • LINUX operating system experience able to run detailed procedures to configure Firmware and load Software, Test and Troubleshoot, RF Experience, and run Acceptance Test Procedures.  


EDUCATION AND EXPERIENCE:
 
  • Associate's degree (A. A.) or equivalent in Electronic Technology or related field of study preferred.  
  • 2 years related experience and/or training; or equivalent combination of education and experience.


QUALIFIED APPLICANTS MUST MEET FOLLOWING REQUIREMENTS:
 
  • Valid State Driver’s License
  • Must be DoD Clearance Eligible


PHYSICAL ACTIVITY:
Climbing, Balancing, Stooping, Kneeling, Crouching, Crawling, Reaching, Standing, Walking, Pushing, Pulling, Lifting, Fingering, Grasping, Feeling, Hearing, Talking, and Repetitive Motions




 


 
Job Number: 1910099812
Job Location: Hunt Valley, MD
Per Diem: Yes
Duration: 12 months
Input Date: 03/18/2019
Last Updated: 10/17/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chris O\'Connor
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002jXr7QAE&URLSource=cjhunter

Electrical Engineers

Description:
Vehicle systems integration
 
Job Location: OH/MI/IN
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: jmac@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineers - Wire Harness

Description:
*Must have BS Engineering Degree
*Wire Harness

Preferred Qualifications:
-Catia
-HarnesSys
-MATLAB

-Active DoD Secret Clearance with a background investigation within the last six years with the ability to obtain program access

Email resume to mmccarthy@pdstech.com
 
Job Number: North-Electrical
Job Location: Oklahoma City, OK
Rate: $63.00-$68.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 6 Months+
Start Date: ASAP
Input Date: 08/05/2019
Last Updated: 08/19/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Subsystems Engineer

Description:
• As a Senior Electrical Subsystem Engineer you'll report to the Lead Electrical Subsystem Engineer and be responsible for assisting with various aspects of the electrical systems design.

On any given day you might:
• Develop electrical systems design and architecture
• Perform electrical systems installation and integration activities across the program IPTs
• Provide subject matter expert level technical guidance and leadership for electrical systems
• Perform electrical loads analysis and documentation
• Define requirements for the electrical systems to ensure compliance with regulations and customer requirements
• Provide validation and verification of electrical systems requirements
• Provide electrical systems support for ground and flight tests for both development and certification
• Interface directly with electrical systems suppliers to ensure requirements are met
• Support the various sub-systems and structures IPTs with their development and certification
 
Job Number: 42-034
Job Location: Reno, NV
Rate: DOE, but very competitive
Per Diem: Yes
Overtime: Possible
Duration: 1+ years
Start Date: ASAP
Input Date: 08/23/2019
Last Updated: 09/16/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Design Engineer - Contract AND Direct Position Available

Description:
General Summary:
The Electrical Systems Engineer provides expertise in support of electrical/electronic systems through all phases of a project, including preliminary design, detailed design, development, certification, production, and product support.

Duties and Responsibilities:
Design, development and certification support of the aircraft Electrical Power System, including power generation, distribution and energy storage

Qualifications

Education, Work Experience, Certification and/or Licensure:
BS in an Engineering related discipline required, Master’s degree preferred
5 or more years of aviation experience with 8 or more years of directly related experience involving design, development and certification of electrical/electronic power systems
Knowledge of FAR Part 23 or 25 regulations
Knowledge of RTCA/DO-160, RTCA/DO-178 and RTCA/DO-254 processes preferred
Knowledge of system modeling and analysis tools preferred



The Structures Company is an AA/EOE.
 
Job Number: 320
Job Location: NC
Rate: $125K - $60/Hr.
Per Diem: Yes
Overtime: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 08/12/2019
Last Updated: 09/25/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Electrical Technician 2

Description:
Chipton-Ross is seeking an Electrical Technician 2 for an opening in Santa Barbara, CA.

RESPONSIBILITIES:
Provides engineering hardware fabrication support, troubleshooting, testing and basic Laboratory operations responsibility. These responsibilities will include fabrication of electronic/electrical chassis' and mechanical rack fabrication using development engineering drawings. Candidate must be capable of working independently, discussing technical issues with customers and working with vendors.

REQUIRED EXPERIENCE:
Integrated Circuit Layout Technician.
Significant experience with physical layout of mixed signal VLSI CMOS transistor level designs is required. The selected candidate will perform silicon layout of analog and digital submicron transistor level designs in support of advanced infrared cameras and imagers. Designs include ultralow noise analog circuit blocks, low power analog to digital conversion, high speed multi GHz data transmission and serializers. MUST HAVE CMOS integrated circuit layout experience

PREFERRED EXPERIENCE:
Schematic capture, design verification and simulation.

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
4/10
Full-Time

 
Job Number: 179458
Job Location: Santa Barbara, CA
Rate: Up to $45.00 DOE
Duration: 12 Months
Input Date: 05/22/2019
Last Updated: 10/17/2019
Firm Name: CHIPTON ROSS
Attention: Christopher Conaway
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: cconaway@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Test Engineer

Description:
Design, implement, and maintain test processes for Space Systems hardware using lean philosophies and techniques.
Take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing.
This can involve testing, data analysis, and interface with all aspects of the engineering department.
Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program. Responsibilities also include daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met.
Typical Duties: Support laboratory testing of Space hardware, Develop and validate tooling concepts, Author and maintain operation/test procedures, Preparation of standardized operation/test sheets, Defining test rig and facility requirements, Participation on program Integrated Product Development teams, Review drawings and concepts, and resolve testability concerns.
Experience with advanced instrumentation and data acquisition systems is required.
Knowledge of LabVIEW desired.
Experience should also include two plus years working on the testing of electrical systems and components such as motor controllers, actuator controls, & system controllers.
Capability of working independently and is self-motivated.
Excellent communication skills, written and verbal are required.
Ability to proficiently operate common Microsoft Office software products is required.
 
Job Number: 50465
Job Location: Windsor Locks, Ct
Duration: 12 months
Start Date: ASAP
Input Date: 08/12/2019
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Rick Nussbaum
Address: 1857 WELLS RD STE 214
City, State: ORANGE PARK, FL 32073
Phone: 904/562-3221
800 Phone: 866/277-3343
Fax Phone: 904/713-2000
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Test Engineer

Description:
Electrical Test Engineer

Windsor Locks, CT
$25/hr - $67/hr (DOE)
1 year W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
Design, implement, and maintain test processes for Space Systems hardware using lean philosophies and techniques. Take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing. This can involve testing, data analysis, and interface with all aspects of the engineering department.

Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program. Responsibilities also include daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met.

Typical Duties: Support laboratory testing of Space hardware, Develop and validate tooling concepts, Author and maintain operation/test procedures, Preparation of standardized operation/test sheets, Defining test rig and facility requirements, Participation on program Integrated Product Development teams, Review drawings and concepts, and resolve testability concerns. Experience with advanced instrumentation and data acquisition systems is required. Knowledge of LabVIEW desired. Experience should also include two plus years working on the testing of electrical systems and components such as motor controllers, actuator controls, & system controllers. Capability of working independently and is self-motivated. Excellent communication skills, written and verbal are required. Ability to proficiently operate common Microsoft Office software products is required.

Bachelors degree required
 
Job Number: 11307
Job Location: Windsor Locks, CT
Rate: 25-67
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 08/12/2019
Last Updated: 10/01/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Test Engineer - Secret Clearance

Description:
Major functions:

Under limited supervision and with moderate latitude in assignment, may perform some, or all, of the following:

• Develop and implement test plans, test cases, and test software based on project requirements

• Create pass / fail evaluation metrics

• Perform test integration and post-test data analysis

• Perform regression and qualification testing generating test documentation and presenting results

• Create and use test harnesses for embedded systems



Requirements:

Active Secret clearance required walking in the door



Education/Experience/Licenses etc.:

Required Education/Experience: Bachelors Degree in Engineering, Math, or Physics.

• Seven or more years experience with embedded system testing, integration, and validation techniques

• Seven or more years experience documenting test results for corrective actions, reporting, and audits

• Five or more years experience defining system pass / fail metrics and with performing test data analysis

• Familiarity with RF, Navigation, and GPS

• Excellent written and verbal communication skills required

• Ability and motivation to quickly learn the program scope and fundamentals required to support a fast moving project

• Expertise testing in an embedded software development environment with broad lab experience integrating with target hardware.

• Ability to successfully interact with other Engineering disciplines including design, systems, and software engineering functions.

• Capable of working in a team environment with the ability to work independently at times with minimal supervision

• Demonstrated self-starter

• Some weekends and evenings will be required

• Occasional travel may be required (<5%)

Special Requirements: Must have an Active Secret Security Clearance. US citizenship required for this position.




Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
 
Job Number: 19-21565
Job Location: Anaheim, CA
Rate: 80.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2019-12-31 00:00:00.0
Start Date: 2019-06-17 00:00:00.0
Input Date: 05/28/2019
Last Updated: 08/20/2019
Firm Name: NESCO RESOURCE
Attention: Kevin Lord
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

Electrical UM (23&25)

Description:
PDS Tech, Inc. is seeking Electrical in Wichita, KS
This role will gain valuable engineering experience in the area of design requirements including capture, design, validation, troubleshooting, and certification of aircraft avionic and electrical systems. Working with managers and key players in Engineering, Candidates will assist in the development and evaluation of crucial systems on  Aviation Products. Prepare engineering drawings for avionics and electrical system interface wiring using computer based drafting tools (CATIA/CCD and/or IAI HarnesSys). Utilize electronic test equipment to verify avionics and electrical systems meet design requirements, and/or for system troubleshooting in the lab and on aircraft. Prepare engineering trade studies, functional test procedures, certification plans, ground and flight test plans, certification reports, and other engineering documents. Write technical descriptions of subject matter pertinent to design or test requirements. Includes descriptions of supplier parts, test or rigging specifications, etc. Assist with the evaluation and analysis of avionics and electrical system design for completion of function hazard assessments and system safety assessments.

Job Responsibilities:
• DER/UM-related duties missing; ensuring that the proposed design is certifiable, coordinating with the FAA, resolution of certification issues, determination of the certification basis, writing the certification plan, witnessing certification testing, find compliance.
• Responsible for successful integration and certification of vendor equipment into Cessna Citation aircraft. Assists in preparation of reports, engineering drawings, reports and other documents. Coordinates with direct and indirect customers and suppliers to determine system requirements and resolve problems.
• Responsible for completing complex development, design, testing and certification assignments for new design or modifications. Develops creative, scientific alternatives during course of job assignments to reach desired outcome.
• Conducts research, calculations, estimates and drafting of projects to conform with established specifications such as capacities, styling, performance and determine status of work in progress. Performs above work utilizing frequent application of in-depth engineering principles.
• Maintain a high degree of proficiency in computer applications to accomplish tasks.
• Consults and coordinates with other engineering and manufacturing personnel to coordinate design function and resolve technical problems. Consults with supplier to discuss and remedy issues in a timelier and efficient manner.
• Requests and coordinates work performed by Engineering support groups, Experimental, Manufacturing and Supply Chain Management for the project. Instructs suppliers as to materials, equipment and hardware for utilization on aircraft in accordance with approved specifications.
• Maintains contact with Product Support Engineering and production departments to resolve engineering problems impeding production and to assist in the incorporation of new design concepts and changes.
• Monitors and conducts analyses on first article fabrication and operation to assure adequacy of design.
• Reviews and evaluates supplier proposals for potential utilization on future models.
• Provides guidance to engineers and report writers in the solution of specific, complex design problems, which must be resolved during development and testing.
• Assures supervision awareness of program status, problems and successes. Provides periodic design reviews and update presentations to management of engineering and other company organizations and tools.

EDUCATION:
• B.S. or advanced degree in Aeronautical, Mechanical, or Electrical Engineering, Physics, Math, Statistics or related technical degree required
• Minimum 7 years of experience in General Aviation or Business Aircraft development programs

JOB QUALIFICATIONS:
• Electrical DER qualifications (FAR 23 or 25).
• Experience with domestic and foreign business and/or general aviation aircraft certification process is required
• Some experience in system assessment using modeling tools such as Failure Modes and Effect Analysis (FMEA), (Failure Modes and Effect Criticality Analysis (FMECA), Reliability Block Diagram (RBD), and Fault Trees Analysis (FTA) is desired.
• Experience with Microsoft Office software application and working environment is required.
• The candidate must be able to work in a team environment and be able to clearly communicate thoughts and ideas with peers, management, and certification authorities.
 
 
Job Number: 1910098626
Job Location: Wichita, KS
Duration: 12 months
Input Date: 02/20/2019
Last Updated: 10/17/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Marjorie Santiago-Marquez
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002jTbWQAU&URLSource=cjhunter

Electrical/Avionic Design Engineers

Description:
PDS Tech Inc is seeking Avionics/Electrical Designers in Wichita, KS

JOB RESPONSIBILITIES:

  • Job Responsibilities:
    • Responsible for integration of supplier avionics equipment into Cessna Citation aircraft.
    • Responsible for completing complex development, design, testing and certification assignments for new design or modifications.
    • Develops creative, scientific alternatives during course of job assignments to reach desired outcome.
    • Designs aircraft interface wiring, and prepares engineering drawings, reports and other documents.
    • Maintain a high degree of proficiency in computer applications to accomplish tasks.
    • Coordinates with direct and indirect customers and suppliers to determine system requirements.
    • Consults other engineering and manufacturing personnel to coordinate design and resolve technical issues.
    • Consults with supplier to discuss and remedy issues in a timely and efficient manner.
    • Provides guidance to lower grade engineers in the solution of complex design problems.
    • Reviews and evaluates supplier proposals for potential utilization on future models.
    • Performs above work utilizing frequent application of in-depth engineering principles.
    • Assures supervision awareness of program status, problems and successes.
    • Provides periodic design reviews and update presentations to management of engineering and other company organizations.


 
 



 
Education/Experience:
• B.S. or advanced degree in Electrical Engineering, Computer Engineering, Electrical/Electronic Engineering Technology, or related technical degree required
• Experience with avionics and electrical system design to the requirements of CFR 14 Parts 23 & 25 desired
• Minimum 7 years of experience in General Aviation or Business Aircraft development programs

Qualifications:
• Working knowledge of generic CAD wiring design tool processes. Experience in CATIA/CCD, Mentor Graphics, and/or IAI HarnesSys is preferred
• Ability to read and produce wiring drawings using standard industry practices
• Experience with electronic test equipment
• Design knowledge of electrical bonding criteria, thermal cooling requirements for electronic equipment, EMI shielding, and High Intensity Radiated Fields (HIRF)/Indirect Effects of Lightning (IEL) installation criteria preferred
• Skills in Microsoft Office suite software
• C/C++ and assembly programming experience preferred
• Visual Programming language preferred
• Excellent written and verbal communication skills
• Strong analytical and problem solving skills
 
Job Number: 1910097705
Job Location: Wichita, KS
Duration: 6 months
Input Date: 02/27/2019
Last Updated: 10/17/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Marjorie Santiago-Marquez
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002r9TMQAY&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical/ Electronics Technician

Description:
Electrical/Electronics Technician

Location: Ventura, CA
Duration: 11-12 years

Description:
Job Descriptor:
Sets up test apparatus and conducts tests of electronic assemblies and units following methods, procedures, standards, and sequences; lays out and assembles units for production electronic equipment according to designs and specifications. Adjusts and calibrates systems as required; modifies electronic equipment by adding, removing, or altering components as defined by predetermined diagrams and sketches. Corrects malfunctions by making adjustments or replacing parts or components as directed. Uses hand and small power tools, and various measuring and testing devices in performing job duties. Determines types of tests to be performed, approves and suggests modifications to testing equipment, and analyzes test results to evaluate performance of products and equipment. Assists engineers in design and development of test procedures for new products and recommends product improvements or manufacturing modifications. May monitor and verify quality in accordance with statistical process or other control procedures. Specific work is the tear down, troubleshooting, repairing, rebuilding and testing of electronics boxes containing about 1/2 dozen circuit cards.

Skill/Experience/Education:
Mandatory:
- Experience in the set up test apparatus and conducts tests of electronic assemblies and units.
- Systems calibration experience
- Demonstrated work experience in reading schematics
- Test design and development
- Specific work is the tear down, troubleshooting, repairing, rebuilding and testing of electronics boxes containing about 1/2 dozen circuit cards High School diploma, or equivalent experience/combined education, with additional specialized technical training equivalent to a technical Associate degree and/or demonstrated ability to perform assigned technical/para-engineering tasks and 3 Years of experience.
 
Job Number: 19-11164
Job Location: Troy, MI
Input Date: 08/13/2019
Last Updated: 08/28/2019
Firm Name: ICONMA LLC
Attention: Saumya Negi
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

Electro/Mechanical Design Engineer

Description:
-Designer will use Computer Aided Design (CAD) systems to prepare mechanical design layouts, detail and assembly drawings and models (including but not limited to packaging, mechanisms, and castings)
-Electrical/mechanical packaging, harnessing, structures, cabling, surfacing and mechanisms
-Technical knowledge sufficient to perform complex tasks such as preparation of all types of detail drawings, large assemblies, castings or other performs, interface drawings, various layouts for design
-Advanced experience of CREO Parametric (Pro/Engineer) solid modeling CAD tool and considerable knowledge of Windchill data management (PDM) tool . GD&T
 
Job Number: 0878
Job Location: Multiple
Rate: 50-80/hr
Per Diem: YES
Overtime: Possible
Duration: 6-12 months plus
Start Date: 2/3 wks
Input Date: 05/29/2018
Last Updated: 10/17/2019
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: davellino@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronics Circuit Card Test and Design Engineer /DV&T

Description:
*This is a full time, 1 year position, located in Huntsville AL*



We are hiring for an Electronics Test and design Engineer who will work on electronics testing for DoD/Military anti-missile systems. The position will involve day to day working with detailed circuit board design/specification, schematic capture, FPGAs, DSP, electro optics, A/D and D/A conversions, and inertial measurement.



Candidates will need strong Circuit Card Assembly (CCA) design, verification, test and troubleshooting ability to create electrical circuit requirements from board level specifications creating CCAs that optimize Size, Weight, Power and Cost (SWAP-C)



Required:
*15 years’ experience as an Electronics circuit card test and design professional
*Strong circuit card assembly design for cradle to grave (specification to production)
*Design Verification and Test (DVT) skills
*Strong design review skill in either a technical appraiser or presenter.
*Experience with FPGAs and subcontracted electrical assemblies.
*Ability to apply and gain a secret Clearance upon start (requires US Citizernship)



Pluses:
*Earned Value Management System (EVMS) knowledge
*Experience with design and failure analysis of high-reliability electronic assemblies
 
Job Number: 832
Job Location: Huntsville, AL
Rate: $60.30
Per Diem: yes split
Duration: 1 year or more
Input Date: 08/05/2019
Last Updated: 09/06/2019
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

Electronics Technician

Description:
PDS Tech is seeking Electronics Technicians / Assemblers for frequent openings in Clearwater, FL. 


In your role, you will:
  • Assemble electrical or electronic systems and support structures.
  • Install components, units, subassemblies, wiring and assembly casings using rivets, bolts, soldering and micro-welding equipment.
  • Hand solder components under a microscope.  Fine pitch soldering experience is required.
  • Use hand tools and work instructions to assemble units according to product specifications.
  • Use engineering diagrams/Mil-Standard specs (IPC) and schematics in a production environment.

Qualifications:
  • Fine pitch soldering experience is required is a plus 
  • 5 years experience in electronics assembly preferred.
  • Must have a High School Diploma or GED
  • Associates degree in Electronics or Engineering Technology desired.

Desired Certifications:

  • IPC J-STD-001:  Soldered Electrical and Electronic Assemblies
  • IPC-7711/7721: Rework and Repair of Electronic Assemblies
  • IPC/WHMA-A-620:  Cable and Wire Harness Assemblies

Opportunity for contract-to-hire based on employee performance, attendance, dependability and Client’s business needs. ​

Please call Clyde at 813-426-9917 or email ccallwood@pdstech.com for more information

 
 
Job Number: 1610047076
Job Location: Clearwater, FL
Per Diem: No
Duration: 12 months
Input Date: 10/22/2018
Last Updated: 10/17/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000026C5mAAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronics/Avionics Design Engineer

Description:
Successful Candidate will perform Development, design, testing and certification documentation for new or modified printed circuit board modules for aircraft
II. Apply electrical engineering theory and the operation of electronic test equipment to functionally test and troubleshoot avionics/electrical modules or systems
III. Validate electronic circuit design concepts using SPICE software
IV. Design printed circuit board layouts using Altium design software
V. Utilize VHDL to modify and maintain Programmable Logic Devices
VI. Utilize ASM and C to modify and maintain microcontrollers.
VII. Support the preparation of engineering certification reports to document system designs that meet the requirements of certification authorities
VIII. Prepare functional test documents to verify proper operation of electronic assemblies

Bachelor’s Degree in Engineering:
o Preferred- Electrical Engineering

• Minimum of 6 years of engineering experience or relative aviation technical or systems experience
 
Job Number: 1910104449
Job Location: Wichita, KS
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: Long Term
Start Date: ASAP
Input Date: 07/24/2019
Last Updated: 08/22/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Rick Ingle
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Website: www.pdstech.com

Embedded Software Engineer 4

Description:
Chipton-Ross is seeking an Embedded Software Engineer 4 for an opening in Orlando, FL.

RESPONSIBILITIES:
Software Engineer to develop and maintain real-time embedded software applications. Typical applications are software products related to image processing, target detection and tracking, missile guidance/ navigation/ control algorithms, missile launchers, system control, built-in test, and system communication. Development will be in C and C++ hosted on either a PC or Unix environment and targeted for an embedded processor running either VxWorks or Integrity as the real-time operating system. Familiarity with standard communication busses and protocols including RS-232, RS-422, MIL-STD-1553 and Ethernet is helpful but not required. The candidate will have experience throughout the entire software development lifecycle including architecture, design, code implementation, and integration and test. The candidate will be experienced in technical task leadership and/or be a subject matter expert in an area relevant to Client products described in the above paragraph. The candidate will have a strong background in real-time embedded software development along with demonstrated technical leadership. The candidate will be familiar with using source code control and issue tracking tools along with using modern test tools to do unit test and static analysis. An ideal candidate will be able to configure and manage a continuous test environment. Bonus skills would be familiarity with Agile development, Cyber Security, Department of Defense products, board support package and device driver development.

REQUIRED EXPERIENCE:
Experience with embedded real-time development in C and C++ Experience in software architecture, design, coding, unit test, integration, and verification RTOS experience with VxWorks, Integrity, or Linux Experience with Hardware-Software integration Excellent communication skills.

PREFERRED EXPERIENCE:
Experience generating and maintaining program software documentation such as SRS, ICD, Test Plans, Test Procedures Experience with software configuration management tools such as Git, JIRA, SVN Familiarity with Visual Studio (i.e., Visual C++). Familiarity with Atlassian tool suite and Jenkins test tool.

EDUCATION:
Accredited Bachelor's Degree in Computer Engineering or Computer Science, Electrical Engineering or equivalent.

WORK HOURS:
9/80, 1st Shift
Full-Time

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 179657
Job Location: Orlando, FL
Rate: Up to $80.00 DOE
Duration: 8 Months
Input Date: 06/04/2019
Last Updated: 10/17/2019
Firm Name: CHIPTON ROSS
Attention: Robert Davis
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: rdavis@chiptonross.com
Website: www.chiptonross.com

Engineer – Aircraft Structural Modification Support

Description:
PDS Tech, Inc. is seeking an Aircraft Structural Modification Support Engineer in Lexington, MA. 

Aircraft Structural Modification Support
2. Background/Need
Group 108 works to understand air defense issues, in particular, air vehicle survivability, vulnerability of U.S. Air Force (USAF) aircraft to weapons systems, electronic countermeasures, and air surveillance for homeland defense. The focus is on understanding USAF and threat air defense systems through tests and measurements. Test activities include flight, field, and laboratory testing. We operate three airplanes, all highly instrumented and numerous ground systems as needed for test efforts. We also develop new hardware for testing and prototype systems as well as for instrumenting existing sensors. Group 108 requires for one full time Engineer to support the aircraft structural modification project.
3. Position Scope/Job Functions
Candidate will be responsible for the management of a multi-year transformation of a Gulfstream IV-SP into the next Airborne Sensor Test Bed (ASTB). The project entails major airframe modifications including fuselage and wing strengthening, the integration of under wing / centerline instrumentation pods, nose and tail electromagnetic and optical sensors, a sonobuoy or dropsonde release system and major electrical/data infrastructure. Candidate will participate in overseeing vendors performing the necessary aircraft modifications and ensuring that the work is properly executed, documented and delivered on schedule. Support will also include design and conduct of a flight test program to demonstrate compliance with modifications specifications and to obtain FAA approvals for continued operations. Related work will include establishment of a configuration management program and documentation archive to support the aircraft throughout its life.
4. Skills: Required
- Direct program management experience of significant aircraft structural modifications
- Experience with sensor and or mission system integration to turbine powered aircraft
- Experience in the design and conduct of flight test programs for certification of major modifications
- Familiarity with design and conduct of aircraft structural demonstration, stability and control, flutter, handling qualities, and performance flight tests
- Familiarity with the requirements for and development of certification documentation, particularly Flight Manual Supplements
- Subject Matter Expertise with 14 CFR (FAR) Part 91 repair, overhaul, maintenance and modification requirements, Supplemental Type Certificate (STC) processes, and Experimental Type Certificate approval processes
- Working knowledge of 14 CFR (FAR) Part 25 certification requirements, particularly in the areas of damage tolerance analysis and instructions for continuing airworthiness
- Familiarity with Configuration management tools and processes
- Experience with MS Office tools (Word, PowerPoint, Excel and Project)
- Ability to produce and present accurate and timely status reports and presentations both written and oral to all levels of management
- Familiarity with Federal Acquisition Regulations
5. Skills: Preferred
- Experience with FAA certification of modifications designed to carry external stores on
commercial aircraft
- Experience overseeing the structural modification of GIV, GIV-SP or GV Gulfstream aircraft
desired
- Airframe and Powerplant License
- Designated Engineering Representative (DER) with a Structures and Electrical rating
- Designated Airworthiness Representative (DAR) rating is desired
- Demonstrated ability to lead a disparate team of engineers, technicians, and support personnel
towards a common goal
6. Education/Professional Certifications
MS plus three (3) years minimum relevant experience or BS plus five (5) years minimum relevant
experience
7. Laboratory-furnished equipment and information
Office space and a Laboratory desktop computer will be supplied.
8. Place of Performance
Work will be performed at the MIT LL Flight Test Facility, Hanscom Air Force Base, Bedford, MA, Bldg
1715 location. Extensive travel to oversee modification/flight test activities at contractor facilities (US
and Canada) is required. Anticipate approximately 50% travel to vendor locations.
9. Period of Performance (PoP)
Three (3) year period of performance is required.
10. Security
All personnel must successfully pass a Commercial Background Investigation (CBI) and hold at least an
Interim Secret security clearance before receiving facility access.
Will the performance of work require access to classified information? YES
What level of clearance is required? SECRET

Education requirements:
 
  • MS plus three (3) years minimum experience in Aeronautical / Aerospace Engineering with a Structural Focus desired or BS plus five (5) years minimum experience is required.

 
Required Qualifications:
 
  • Direct program management experience of significant aircraft structural modifications
  • Experience with sensor and or mission system integration to turbine powered aircraft
  • Experience in the design and conduct of flight test programs for certification of major modifications
  • Familiarity with design and conduct of aircraft structural demonstration, stability and control, flutter, handling qualities, and performance flight tests
  • Familiarity with the requirements for and development of certification documentation, particularly Flight Manual Supplements
  • Subject Matter Expertise with 14 CFR (FAR) Part 91 repair, overhaul, maintenance and modification requirements, Supplemental Type Certificate (STC) processes, and Experimental Type Certificate approval processes
  • Working knowledge of 14 CFR (FAR) Part 25 certification requirements, particularly in the areas of damage tolerance analysis and instructions for continuing airworthiness
  • Familiarity with Configuration management tools and processes
  • Experience with MS Office tools (Word, PowerPoint, Excel and Project)
  • Ability to produce and present accurate and timely status reports and presentations both written and oral to all levels of management
  • Familiarity with Federal Acquisition Regulations
  • U.S. Citizenship required
  • Ability to obtain and maintain a security clearance

 
Desired Qualifications:
 
  • Experience with FAA certification of modifications designed to carry external stores on commercial aircraft
  • Experience overseeing the structural modification of G-IV, G-IVSP or GV Gulfstream aircraft desired

Airframe and Powerplant License

  • Designated Engineering Representative (DER) with a Structures and Electrical rating
  • Designated Airworthiness Representative (DAR) rating is desired
  • Demonstrated ability to lead a disparate team of engineers, technicians, and support personnel towards a common goal

Personnel possessing an active SECRET clearance is desired. All personnel must successfully pass a Commercial Background Investigation (CBI). In addition, they may begin with an interim clearance but must obtain and maintain a SECRET clearance.

 
 
Job Number: 1910104407
Job Location: Bedford, MA
Duration: 36 months
Input Date: 07/17/2019
Last Updated: 10/17/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Phil Press
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GTYtQAO&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Technician

Description:
Job Number: 165661

Roles and Responsibilities
Our client is seeking an Engineering Technician with relevant aerospace industry experience working on small, medium and/or large government and commercial programs. Must be able to read and follow written instruction as well as interpret and apply technical drawing views and notes.

**Team: Our Technician Team is sitting at approximately 20 strong. This role will start with training and bringing up to speed with our processes working side by side with experienced technicians and/or Engineers on mechanical assembly and testing. Worker should be able to work with others or independently.

Qualifications and Education Requirements
• Must be organized and accountable for personal workload.
• Must be diligence in maintaining paperwork associated with hardware assemblies so as to maintain traceability.
• Requires experience following procedures but also able to work with engineers to create new processes.
• Knowledgeable with structural bonding and application of coatings using various epoxy and silicone adhesive products.
• Working level understanding of force, torque, and precision hand tools.
• Organizational ability to follow, or determine, optimum order of assembly for complex structures and devices.
• Familiarity with electrical harness assemblies is preferred, including ability to interpret and work to electrical assembly schematics as well as basic electrical tests such as continuity and insulation resistance.
• 4 years or more documented experience in technical work. Aerospace experience preferred.
• High school diploma or equal - Junior college, trade school or university preferred. micrometers.

The majority of the work will involve: Mechanical assembly including threaded fastener and adhesive bonding using hand tools like torque wrenches, digital levels, calipers, force gauges. Some of the work for more skilled applicants could include: Electrical assembly including soldering (Jstd space addendum preferred), harnessing (crimping, connectorizing, dressing) The materials for the work will be composite panels, solar cells, and machined parts.
 
Job Number: 165661
Job Location: Goleta, CA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Contract to Hire
Start Date: ASAP
Input Date: 07/17/2019
Last Updated: 08/19/2019
Firm Name: MIDCOM CORPORATION
Attention: Minja Schmelzl
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

FPGA Electrical Engineer

Description:
BA/BS degree, 7+ years of experience; experience with DDRx, SOC, ultra scale
 
Job Number: 49866
Job Location: Florida
Input Date: 10/07/2019
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Address: 1857 WELLS RD STE 214
City, State: ORANGE PARK, FL 32073
800 Phone: 866/277-3343
Email: rmeserve@apollopros.com
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Facility Operations Analyst / Electrician for commercial facilities / journeyman electrical license required - Clearance NC

Description:
165718
Job Title: Facility Operations Analyst

Work Site Address: Fort Bragg, NC 28303
Job Number: 1810-1
Max Pay Rate: $24.50/hr
Start Date: 9/16/2019
End Date: 11/17/2019
Position Type: Contract

Job Summary:
Responsible for repairing and installing electrical systems in new industrial construction and maintaining electrical equipment and wiring. Must be able to identify, troubleshoot and repair problems in electrical wiring that occur in an industrial setting. Expected to be able to run tests, isolate problems, replace faulty sections of wiring, and lay conduit for the new electrical systems. Work well with public as well as with co-workers and willing to listen to others.

Performs tasks related to the overall management and operations of facilities, including energy management, material inventory, maintenance and construction. May oversee the repair, replacement or redesign of facilities, and preventive maintenance planning and scheduling. Implements the timely completion of requirements in compliance with Company programs, objectives and within established cost parameters. May monitor work performed by vendors and/or subcontractors; determines adequacy of work relative to job specifications/scope, and recommends corrective actions as required.

Qualifications and Education Requirements
Must have good math skills, as need to take measurements and work with numbers.
Must also be able to read blueprints. Should have good overall knowledge of all building electrical systems and electrical theory.

Requires lifting up to 55 pounds and moving it without assistance between building and across campus effectively and efficiently
Must have a journeyman electrical license.
Must be able to pass CRC Physical Assessment

Qty 1 position needed

In need of an Electrician for commercial facilities. The candidate will be a worker (hands on) not a manager.
 
Job Number: JE-1810-1S
Job Location: Fort Bragg, NC
Rate: 24.50/hr max
Duration: 3 months
Input Date: 07/18/2019
Last Updated: 10/03/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Field Service Specialist

Description:
PDS Tech, Inc. is seeking a Field Service Specialist  in Metairie, LA.

Summary:

  • These positions will be performing installation work in the field to support the Entergy Project to include the installation of electric meters and minimally assisting in warehouse operations.
  • The role of a FSTs primarily includes working outside in the Metairie area in hot and cold weather, capable of operating data collection tools from handheld tablet computers, be able to work quickly and accurately and most-importantly be able to professionally interact with local utility customers.

Requirements:



* Strong technical, written, and oral communication skills and ability to work independently 



* Ability to analyze and solve problems 



* Ability to work in all types of outdoor environments 



* Ability to operate a company vehicle and comply with company safe driving practices. 



*A familiarity with basic computer skills 



* Hold a clean driving record/Valid Driver's License. 



* Adhere to all Federal, State and Local driving requirements, company policies and procedures as well as additional legal regulatory requirements

Previous electrical experience preferred.

 
Job Number: 1910104858
Job Location: Metairie, LA
Duration: 18 months
Input Date: 07/25/2019
Last Updated: 10/17/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Rachelle Caramagno
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Email: cecjnrt@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GUzxQAG&URLSource=cjhunter

Field Service Specialist

Description:
PDS Tech, Inc. is seeking a Field Service Specialist  in Metairie, LA.

Summary:

  • These positions will be performing installation work in the field to support the Entergy Project to include the installation of electric meters and minimally assisting in warehouse operations.
  • The role of a FSTs primarily includes working outside in the Metairie area in hot and cold weather, capable of operating data collection tools from handheld tablet computers, be able to work quickly and accurately and most-importantly be able to professionally interact with local utility customers.

Requirements:



* Strong technical, written, and oral communication skills and ability to work independently 



* Ability to analyze and solve problems 



* Ability to work in all types of outdoor environments 



* Ability to operate a company vehicle and comply with company safe driving practices. 



*A familiarity with basic computer skills 



* Hold a clean driving record/Valid Driver's License. 



* Adhere to all Federal, State and Local driving requirements, company policies and procedures as well as additional legal regulatory requirements

Previous electrical experience preferred.

 
Job Number: 1910104748
Job Location: Metairie, LA
Duration: 18 months
Input Date: 07/19/2019
Last Updated: 10/17/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Rachelle Caramagno
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Email: cecjnrt@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GUhdQAG&URLSource=cjhunter

Field Service Specialist

Description:
PDS Tech, Inc. is seeking a Field Service Specialist  in Metairie, LA.

Summary:

  • These positions will be performing installation work in the field to support the Entergy Project to include the installation of electric meters and minimally assisting in warehouse operations.
  • The role of a FSTs primarily includes working outside in the Metairie area in hot and cold weather, capable of operating data collection tools from handheld tablet computers, be able to work quickly and accurately and most-importantly be able to professionally interact with local utility customers.

Requirements:



* Strong technical, written, and oral communication skills and ability to work independently 



* Ability to analyze and solve problems 



* Ability to work in all types of outdoor environments 



* Ability to operate a company vehicle and comply with company safe driving practices. 



*A familiarity with basic computer skills 



* Hold a clean driving record/Valid Driver's License. 



* Adhere to all Federal, State and Local driving requirements, company policies and procedures as well as additional legal regulatory requirements

Previous electrical experience preferred.

 
Job Number: 1910104463
Job Location: Metairie, LA
Duration: 8 months
Input Date: 07/17/2019
Last Updated: 10/17/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Rachelle Caramagno
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Email: cecjnrt@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GThUQAW&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Control Law Team Leader

Description:
We are seeking a seasoned Flight Control Engineering with successful leadership experience to fill a lead role for an aerospace company located in Nagoya, Japan. Interested candidates should have over 10 years of flight control/dynamics experience as well as senior aerospace program leadership skills.

Responsibilities of the Flight Control Law Team Leader

Manage the team with specialized technical background and knowledge regarding Control Laws Design, Verification and Certification.
Planning, managing and controlling of Control Law design related activities, Desktop Simulations related activities, Manned Simulations related activities, Flight Test related activities, Validation and Verification related activities, including interaction with the pilot community.
Support to integration activities with other areas of the organization including Flight Control Systems, Aeroelastics and Loads.
Preparation of documentation to support Certification and if requested, coordination with authorities (JCAB, EASA, FAA).
Support to Auto-Land and Auto-Pilot Systems and/or activities related to other derivative aircrafts.

Requirements of the Flight Control Law Team Leader

15 plus years of aircraft Flight Control and Flight Dynamics experience.
Previous Leadership experience required.
4 year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation).
Excellent verbal and written communication skills in English.
 
Job Location: Japan
Duration: 2 Years
Start Date: ASAP
Input Date: 08/06/2019
Last Updated: 08/20/2019
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Control System (ATA27) Safety Engineer

Description:
We are seeking an experienced System Safety Engineer with a Flight Control Systems background. Interested candidates should have at minimum 5 years of safety assessment experience as well as previous flight control experience.

Responsibilities of the Flight Control System (ATA27) Safety Engineer

To develop and finalize aircraft T/C design to be compliant to all applicable regulatory requirements and produce necessary documents.
Perform all System Safety Assessments on Flight Control Systems.
Create SFHA/SSA/CMA for related systems.
Work on scheduling to resolve problems and mitigate risk.

Requirements of the Flight Control System (ATA27) Safety Engineer

4 year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation).
5 plus years of experience with safety assessment in flight controls (ATA27)
Must have excellent written and verbal communication skills in English.
Previous aircraft or aviation experience.
 
Job Location: Japan
Start Date: ASAP
Input Date: 09/06/2019
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
We are seeking Flight Test Engineers to join us in Moses Lake, WA to support an exciting new aircraft project. The ideal candidate in this position will be involved in a range of airplane flight test operations including but not limited to:

Support engineering with test plan creation.
Discuss, write and review test cards and test hazard analysis
Support and/or lead test preparation activities, test execution, post-test activities
Support and/or lead pre and post flight briefings.
Monitor live flight data, either via telemetry or onboard flight test aircraft
Process, analyze, and draw conclusions from post-flight data.
Make assessments to ensure the safety of flight determination.
Document flight test design problems for long term fix.
Generate and review appropriate restrictions/ limitations documentation.
Update monitoring screens for specific testing and/or restriction monitoring.


Requirements


5+ years of relevant work experience related to experimental flight test operations.
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning, and test conduct, and test data analysis.
Strong ability to analyze results
Communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related.
 
Job Location: Moses Lake, WA
Start Date: ASAP
Input Date: 08/06/2019
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
We are currently seeking experienced Flight Test Engineers to fill an opening for a company in Moses Lake, WA. The ideal candidate for this position should have 5 plus years relevant work experience related to experimental flight test operations and familiarity with FAA Part 25 or Part 23 certification.

Responsibilities of the Flight Test Engineer

Supporting engineering teams with test plan creation.
Discussing, writing and reviewing test cards and test hazard analysis.
Supporting and leading test preparation activities, test execution and post-test activities.
Supporting and leading pre and post flight briefings.
Monitor live flight data, either via telemetry or onboard flight test aircraft.
Process, analyze and draw conclusions from post flight data.
Make assessments to ensure safety of flight determination.
Document flight test design problems for long term fix.
Generate and review appropriate restrictions/ limitations documentation.
Update monitoring screens for specific testing and/or restriction monitoring.


Requirements of the Flight Test Engineer

5+ years relevant work experience related to experimental flight test operations.
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
Strong ability to analyze results
Communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related.
 
Job Location: Moses Lake, WA
Input Date: 08/06/2019
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Instrument Engineer

Description:
Flight Test Instrument Engineer

Windsor Locks, CT
$67/hr (DOE)
12 month W2 contract
First Shift

Description:
Design, implement, and maintain test processes for Space Systems hardware using lean philosophies and techniques. Take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing. This can involve testing, data analysis, and interface with all aspects of the engineering department.

Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program. Responsibilities also include daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met.

Typical Duties:
Support laboratory testing of Space hardware, Develop and validate tooling concepts, Author and maintain operation/test procedures, Preparation of standardized operation/test sheets, Defining test rig and facility requirements, Participation on program Integrated Product Development teams, Review drawings and concepts, and resolve productivity concerns.

Experience with advanced electrical instrumentation and data acquisition systems is required. Knowledge of LabVIEW desired. Experience should also include five years working on the testing of complex electrical systems, testing and troubleshooting of complex FPGA (Fully Programmable Gate Array), digital and analog based electronic controllers, testing of components such as HED (Hall Effect Device) based pumps and brushless DC motors. Applicant must have the capability of working independently and be self-motivated. Excellent communication skills, written and verbal are required. Ability to proficiently operate common Microsoft Office software products is required.

-Bachelors degree required
 
Job Number: 11298
Job Location: Windsor Locks, CT
Rate: 67
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 08/07/2019
Last Updated: 10/01/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Flight Test Instrumentation Technician

Description:
Role Description
 
Summary
As part of a multicultural team, you will be responsible for manufacturing, assembling, and supporting testing of hardware for flight testing of aircraft. Working from engineering instructions, procedures and drawings with limited guidance, fabricate, install, check-out, calibrate, diagnose, and troubleshoot instrumentation data acquisition systems and sensors. This position will require planning, building and terminating various cable harnesses required in the instrumentation system and significant attention to detail to support safe testing.
 
 
Responsibilities
  • Assembly of components to aerospace standards working from blueprints, engineering orders, schematics, repair manuals and other technical documents
  • Termination and installation of wire harnesses and tubing
  • Work with engineers to review design concepts and provide feedback for ease of assembly
  • Review, edit and follow work instructions for installation tasks
  • Plan, communicate and execute installation steps for complex mechanical installations
  • Work safely in aircraft environment


Qualifications
  • Associates or 2 year technical degree along with a minimum of 1 year of flight test operations experience
  •  
  • A minimum of 5 years’ experience in flight test operations in lieu of the degree
  • Excellent demonstrated verbal and written communication skills
  • Ability to defuse and resolve conflict among other team members
  • Ability to use standard mechanical tools and fabrication shop equipment
  • Must be capable and comfortable working within a diverse team environment

 
Desired

  • A&P license or equivalent experience
  • Experience operating heavy lifting equipment such as cranes and forklifts
  • Experience with measurement tools
  • Familiarity with tube fabrication (bend, flare, fittings, etc.)
  • Ability to perform strain gage installations
  • Knowledge in the use of 3D CAD tools, and the ability to read mechanical drawings and electrical diagrams.

 
Job Number: 1810094286
Job Location: Moses Lake, WA
Duration: 12 months
Input Date: 10/16/2018
Last Updated: 10/17/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002qwKqQAI&URLSource=cjhunter

Flight Test Manager

Description:
PDS Tech Inc. is seeking a Flight Test Manager, Regional Jet Development Project.
This position is located in Moses Lake, WA.

SCOPE:



The Flight Test Team Manager will be assigned with an Aircraft and be responsible for Flight Test Vehicle (FTV) Work Scope, Performance, Execution and Scheduling of the assigned aircraft. Flight Test Team Manager will be responsible for managing initiation, planning, and execution of flight tests and ensuring completion of the flight test within the given schedule. 

The Flight Test Team Manager’s responsibilities include, but not limited to, the following:



  • Assign work, goals to the FTV team members
  • Ensure Test Readiness, Deliverables are on track
  • No injuries or accidents
  • Ensure short and long term program schedules are accurate (updated by flight operation group and Maintenance)
  • Update and present short term schedule (90 days) to Functional Leads weekly
  • Manage the entire FTV schedule through certification
  • Provide daily and weekly FTV status
  • Ensure support for short term schedule activities via Functional Leads
  • Resolve issues with Functional Leads

Flight Test Managers have authority for the following:

  • Setting aircraft configuration, schedule, testing and maintenance goals
  • Implementing process improvements directly related to their FTV

¨  Bachelor of Science degree, or equivalent education and experience, in Aeronautical, Mechanical, or Electrical Engineering, Physics, Mathematics or Computer Sciences from an accredited institution.
 
¨  Must have 15 years of related experience with a minimum of 10 years or more of space flight test experience as described above. .
 
¨  Must be legally able to work in the US.
 
¨  Professional experience in a multilingual and multi-cultural environment.
 


 
Job Number: 1810080780
Job Location: Moses Lake, WA
Duration: 36 months
Input Date: 11/12/2018
Last Updated: 10/17/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002diwyAAA&URLSource=cjhunter

Functional Safety Engineer

Description:
PDS Tech, Inc. is seeking a Functional Safety Engineer in Auburn Hills, MI.

Summary:

  • The Automated Driver Assistance System Safety Engineer will be involved with the development of the future semi and fully automated driver assistance systems and enablers, this may also include enhancements to existing driving assistance systems such as Adaptive Cruise Control, Forward Collision Warning, Lane Keep Assist and Blind Spot Monitor or future electrical architectures to support more advance systems.
  • The Engineer is responsible for performing functional safety analyses and executing related tasks for FCA automated vehicles.
  • This includes performing vehicle and system level hardware and software analysis to identify potential safety impacts, developing safety requirements and supporting other activities in accordance with the FCA Functional Safety Engineering Process.  
  • Some of the specific activities development of Automotive Safety Integrity Level (ASIL) for features via hazard analysis, safety plans, safety cases, and other ISO 26262 work products. In addition, the engineer will interface with other vehicle teams and suppliers.
  • The candidate must have the desire to learn new processes and technologies.

Summary of Position Responsibilities include by not limited to:


  • Perform, support and/or manage the execution of System Safety tasks,


  1. Safety concept and safety program plan.
  2. Safety requirements and traceability.
  3. Support validation and verification team in DVP development and execution.
  4. Safety case development.


  • Participate in design discussions to ensure that the safety requirements are implemented and adequate.
  • Support design activities, CCA/CCM/DFMEA.
  • Support both in house and supplier lead development.
  • Support product development as member of cross functional team.
  • Review supplier functional safety deliverables to assure FCA requirements are supported.
  • Participated or Lead safety reviews of functional safety process work products.
  • Coach engineering teams on functional safety process.
  • Teach classes to FCA employees on functional safety process and analysis.
  • Actively participate in functional safety workgroups, as assigned, to support development or improvement in processes.

Prerequisites:


  • Bachelor of Science degree in Applied Physics, Mechanical, Electrical, Aerospace, or Computer Engineering, or related Engineering field from an ABET accredited university accredited university.
  • 5 years of related engineering experience.
  • 2 years within the area of functional safety.
  • Proven ability to apply the V-model development process.
  • Competency in Systems Engineering – Active Controls, Communications Protocols.
  • Understanding of automotive vehicle systems.
  • Proven competency in Functional Safety and/or System Safety.
  • Trained in both DVP&R and DFMEA creation and execution.
  • Good problem solving, communication, and interpersonal skills.

Preferred Requirements:

  • Master’s degree in Applied Physics, Mechanical, Electrical, Aerospace, or Computer Engineering, or related Engineering field from an ABET accredited university.
  • Understanding of Safety of the Intended function (SOTIF).
  • Trained and certified in ISO26262.
  • Experience in Fault Tree.

      


 
 
Job Number: 1910103748
Job Location: Auburn Hills, MI
Duration: 12 months
Input Date: 07/11/2019
Last Updated: 10/17/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Katie Windhurst
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GRMXQA4&URLSource=cjhunter

Hand Mill Operator

Description:
Chipton-Ross is seeking a Hand Mill Operator for an opportunity in Huntington Beach, CA

RESPONSIBILITIES:
Assembles aircraft interior electrical components, harnesses, connectors, etc. using engineering drawings, company and customer specifications.
Assemble wire harnesses, electrical control modules, electrical connectors and other electrical assemblies or components, using assembly and tool drawings, wiring diagrams, customer and company specifications. Intricate tasks include stripping, crimping, and soldering of wires, use of hand tools and manually operated machines, use of electrical equipment such as heat guns and soldering irons. Confer with quality control inspectors and electrical engineers to resolve assembly problems, incomplete documentation and data interpretation.
" Adheres to company specifications, work instructions, engineering prints and work orders.
" Documents the materials used in the process to maintain traceability.
" Assembles wire harness, electrical control modules, electrical connectors and other electrical assemblies or components, using assembly and tooling drawings, wiring diagrams, customer and company specifications.
" Performs intricate tasks including stripping, crimping and soldering of wires.
" Uses hand tools and manually operated machines, uses electrical equipment such as heat guns and soldering irons.
" Confers with Quality Inspectors, Electrical Engineers and Production Manager to resolve assembly problems, incomplete documentation and data interpretation.
" Safely handles various regulated materials used in the process.
" General Notes:
o Must carefully handle raw material and manufactured parts to ensure the integrity and quality is not compromised by handling.
o All employees have an affirmative duty to protect and maintain the confidentiality of C&D products.
o As business conditions change it is necessary that all employees productively react and handle other essential tasks as assigned now or in the future.
o Tasks may vary slightly based on products produced at division.

REQUIRED EXPERIENCE:
0-3 years.
Other Skills: The ability to read and write at a level necessary for successful job performance.
Entry level.

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
M-F 1st 6am -2:30pm
Full-Time/First Shift

 
Job Number: 179855
Job Location: Huntington Beach, CA
Rate: Up to $13.25 DOE
Input Date: 06/12/2019
Last Updated: 10/17/2019
Firm Name: CHIPTON ROSS
Attention: Cody Reposa
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: creposa@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Hydraulics / Pneudraulics Maintenance / wheels and tires SC

Description:
1886-1 Hydraulics/Pneudraulics
Work Location: Greenville, SC
Status: Open

This position requires AIRCRAFT Hydraulics maintenance experience.

Qty: 1
Desired Start Date: 8/16/2019
End Date: 1/4/2020

Job Description:
The hiring manager is looking for people that have knowledge and understanding of the basic operations of aircraft hydraulics. This position will not necessarily be doing hydraulic operations 24/7 but will instead spend most of the time (not all) manufacturing hydraulic and oxygen lines, tear down and build up of wheels and tires, hydraulic fuel sampling, and working on hydraulic support equipment used on aircraft.

Aircraft Hydraulics maintenance. Performs test and checkout of mechanical, electrical, propulsion, structural, hydraulic subsystems and complete systems located at field locations away from primary company operations. Verifies and corrects such things as welds, sheet metal assemblies, controls, alignment of equipment.

Fabricates Fluid lines and Cables
Build up of wheels and tires
Performs Test Bench Checkouts and Testing
Hydraulic Fluid Sampling

Contractor must be willing to learn and be trained.
Hydraulic experience is required


Pay Rate: $25.00 - $29.00 Hourly

Skills Required
Areas of Expertise Hydraulics Yes 1 2 - 4 Years
Areas of Expertise Wheels No 2 < 1 Year
 
Job Number: JE-1886-1
Job Location: Greenville, SC
Rate: 25-29/hr max
Duration: 5 months +
Input Date: 08/22/2019
Last Updated: 09/13/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

In process Inspector

Description:
PDS Tech is currently recruiting for an InProcess Inspector in the Hollister, CA area.  This is a direct hire position for 2nd shift. 

This role is for our second shift and the required hours will tentatively be between 4pm-2:30am, with the potential for overtime and pay differential.

Duties:
  • Performs limited repetitive dimensional and electrical inspection using basic equipment and established procedures with minimum supervision of a higher inspector or supervisor.
  • Need to have mechanical aptitude with an ability execute good record keeping practices as a major part of the duties.
  • Must be detail-oriented and adept at accuracy.
  • Must be flexible and able to work with a variety of different people and in different areas depending on business need.
  • Interpret drawings and written work instructions.
  • Uses a variety of precision measuring instruments including electrical test equipment including calipers, and micrometer.
  • Schedules, plans, and executes assigned or delegated tasks in an efficient manner.
  • Prioritizes workload such that production delays are minimized or eliminated.
  • Ability to interface directly with customer representatives.
  • Perform other related duties as assigned.
  • Performs limited repetitive dimensional and electrical inspection using basic equipment and established procedures with minimum supervision of a higher inspector or supervisor.
  • Must possess basic mathematical abilities and be computer literate and is comfortable using different applications.
  • Must be able to lift up to 35 lbs.

Must be able to support mandatory overtime as needed
 
Qualifications:

  • Knowledge in the use of basic mechanical measuring tools (including calipers, and micrometer)
  • Ability to interpret basic drawings and instructions
  • Good written, verbal, mathematical and analytical skills
  • High School degree
  • IPC 600, 610 and JStandard certification preferred

 
 
Qualifications:
  • Knowledge in the use of basic mechanical measuring tools (including calipers, and micrometer)
  • Ability to interpret basic drawings and instructions
  • Good written, verbal, mathematical and analytical skills
  • High School degree
  • IPC 600, 610 and JStandard certification preferred

 
Job Number: 1910101126
Job Location: Hollister, CA
Duration: 0 months
Input Date: 04/12/2019
Last Updated: 10/17/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Pam Zack
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033dq7QAA&URLSource=cjhunter

Industrial Electrician

Description:
Primary Responsibilities:
All areas of electrical work will be performed including bending conduit, pulling wire, control circuitry and reading electrical blue prints.
 
Position Requirements:
High school diploma or equivalent (GED) required.
2-3 years of experience in commercial/industrial work preferred. Medium voltage and electronics experience a plus.
Need to possess a working knowledge of NEC electrical codes, and strong conduit bending skills. Pulling wire and terminating devices such as receptacles, switches, motors and other electrical items are everyday practices.  Experience with Panel boards, Transformers and Distribution equipment helps. State journeymen or Masters license a plus. Work required of applicant mirrors a Commercial/Industrial Construction Electrician.
 
 
Job Number: 1910100719
Job Location: De Pere, WI
Duration: 6 months
Input Date: 04/11/2019
Last Updated: 10/17/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Tyler Belisle
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033ckOQAQ&URLSource=cjhunter

Industrial Electrician

Description:
Primary Responsibilities:
All areas of electrical work will be performed including bending conduit, pulling wire, control circuitry and reading electrical blue prints.
 
Position Requirements:
High school diploma or equivalent (GED) required.
2-3 years of experience in commercial/industrial work preferred. Medium voltage and electronics experience a plus.
Need to possess a working knowledge of NEC electrical codes, and strong conduit bending skills. Pulling wire and terminating devices such as receptacles, switches, motors and other electrical items are everyday practices.  Experience with Panel boards, Transformers and Distribution equipment helps. State journeymen or Masters license a plus. Work required of applicant mirrors a Commercial/Industrial Construction Electrician.
 
 
Job Number: 1810094541
Job Location: Manitowoc, WI
Duration: 6 months
Input Date: 10/31/2018
Last Updated: 10/17/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Tyler Belisle
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002qxVkQAI&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Job Opening: Controls Engineer in Indianapolis, IN

Description:
Please let me know if you would be comfortable with the job description and do send me your updated resume asap

Controls Engineer

Location: Indianapolis, IN
Duration: 6-7+ months

Description:
Responsibility level:
Under general direction, responsible for the design, configuration, and operation of complete building control systems including fire, security, and other low voltage control sub-systems (ie lighting, nurse call, data networks, etc) to meet the intent of the project requirements. Accountable to field teams for quality, timeliness and efficiency of designs. Develops complex software programs, commissions and troubleshoots to ensure proper operations of the building control system. Provides detailed information and submittals to communicate design and operation to customers, consultants, client field installation team and subcontractors.

Principal duties:
- Designs and configures technically complex building control systems as defined by the contract documents. Creates flow diagrams, sequence of operations, bill of material, network layouts and electrical schematics as required.
- Develops and tests software programs necessary to operate the system per the intent of the project requirements.
- Coordinates the creation of necessary drawings and equipment schedules for submittals and installation.
- Selects, orders, and tracks the delivery of materials for assigned projects. Coordinates factory-mounting processes to meet factory and project schedule.
- Assists in the loading and commissioning of all system and network-level controllers as required. Assists in validation of complete system functionality and troubleshoots problems with subcontractors and other trades to ensure proper operation.
- Provides field change information to the project team for the creation of as-built drawings and software.
- Keeps management and client contractor or customer informed of job progress and issues.
- Assists in performing site-specific training for owner/operator on the total building control system.
- Participates in release meeting with project field team. Performs value engineering to provide cost effective results while maintaining customer satisfaction.
- Adheres to safety standards. High degree of regard to employee and subcontractor safety.

Requirements:
Bachelor’s Degree in Engineering with a minimum of three years’ experience, or an associate degree in a related technical field with five years of relevant work experience required.
Demonstrated knowledge of the construction or HVAC industry. Demonstrated knowledge of control theory, automatic temperature controls, building automation systems and other building subsystems. Demonstrated experience in the integration of low voltage building sub-systems using various industry protocols (i.e. LON, BacNet, etc). Ability to relate technical knowledge to a non-technical audience. Demonstrated advanced computer skills required, particularly computer-related drafting tools.
 
Job Location: Indianapolis, IN
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 months
Start Date: ASAP
Input Date: 08/05/2019
Last Updated: 08/28/2019
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Jr. Avionics Systems Engineer

Description:
General Summary:
The Avionics System Engineer will be responsible for the design, development, and integration of the assigned avionics systems for the aircraft.


Duties and Responsibilities:
• Define, plan, and develop complex systems level requirements to support the avionic systems.
• Perform systems level integration activities for aircraft avionic systems including: Control and Display Systems; Navigations Systems; Communication Systems; Surveillance Systems; and Cabin Management Systems
• Interface with suppliers to ensure technical requirements are met to support aircraft development need dates
• Provide technical assistance to production and customer service departments for support of system technical inquires and issue resolution
• Perform system evaluation and analysis to verify the system design compliance with functional requirements
• Coordinate with cross-functional team members to complete assignments/projects as defined and on schedule
• Develop targeted system level enhancements to address customer feedback and product improvement initiatives
• Conduct system lab testing and aircraft functional testing
• Prepare presentations on avionics system design/development status
• Support system analyses for avionic systems
Qualifications


Education, Work Experience, Certification and/or Licensure:
• Bachelors’ degree in Engineering from a four year college or university; preferably in Electrical/Electronics Engineering or Aerospace Engineering
• Minimum of 6 years to a maximum of 20 years’ experience working with integrated aircraft avionic systems in the areas of design engineering, system analysis, and system test


Knowledge, Skills and Abilities:
• Working knowledge of design requirements of 14CFRPart 23
• Proficiency in writing technical documentation and reports involving test data and analysis
• Familiarity with avionics/electrical test laboratories and lab equipment
• Working knowledge of System qualification requirements including DO-160E/F for environmental, DO-178B for software, and DO-254 for complex electronic hardware
• Proficiency in Microsoft Office suite (Word, Excel, Project, PowerPoint is required)
• Proficiency in requirements management tools such as DOORS
• Proficiency in PLM Tools such as TeamCenter and SAP
• Ability to handle complex work assignments
• Ability to work independently and within a multi-functional team environment




The Structures Company, LLC is an AA/EOE.
 
Job Number: 296
Job Location: NC
Rate: $50/Hr.
Per Diem: Yes
Overtime: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 08/06/2019
Last Updated: 08/27/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Lead Weight Engineer

Description:
We are seeking an experience Weight Engineer to fill an opening for an aerospace company in Nagoya, Japan. Interested candidates should have aircraft certification experience in relation to weight and center of gravity in addition to flight test experience.

Responsibilities of the Lead Weight Engineer​

Aircraft weight reduction activity and design weight growth study.
Certification activity related to weight and C.G.
Support of the sales, marketing, customer support, flight test, ground test and manufacturing tooling/process related to weight and C.G.
Checking the status and forecast of aircraft weight and C.G.
Checking the status weight of system and structure component vs target weight along with determining or revising the design weight and C.G. envelope.
Designing weight growth plans.
Preparation of weight report and mass data for analysis, tests and manufacturing tooling process.
Preparation of weight and balance manual.
Improvements of weight data gathering and verification process.

Requirements Lead Weight Engineer

15 plus years of aircraft certification experience in relation to weight and center of gravity.
Extensive flight test experience.
Previous Leadership experience required.
4 year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation).
Excellent verbal and written communication skills in English.
 
Job Location: Japan
Duration: 2 Years
Start Date: ASAP
Input Date: 09/25/2019
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MATERIAL & PROCESS ENGINEER

Description:
Role: : MATERIAL & PROCESS ENGINEER
Location: Centennial, CO
Duration: 10 months’ contract

Job Description:
This contract labor position is for a mid-level to highly experienced Avionics Parts, Material and Processes (PMP) engineer, with responsibilities to include the following:
- Serve as team member within the Avionics PMP Group - ensuring that PMP review, testing and procurement meet project schedule and budget
- Provide Avionics PMP support to Avionics hardware including EEE piece parts, electrical circuit boards, electrical connectors, electrical box assemblies, batteries, and wire harnessing
- Coordinate with designers to ensure proper PMP selection on heritage and major development programs
- Review drawing packages for material and process selection and compatibility with electrical parts
- Evaluate and approve Part Approval Requests (PAR) using physics of failure based reliability principles, including assignment of suitability for the application, and the intended mission profile environment
- Interface with Avionics suppliers in support of Hardware Design, Manufacturing Processes Reviews, Build Instruction Reviews, and Build Anomaly Reviews
- May require up to 20% travel

Position Requirements:
• Bachelor of Science degree in Material Science, Electrical Engineering, Physics, or similar applied science or engineering fields
• Current or previous experience with Aerospace Avionics Parts, Material and Processes including electrical piece parts, wire harnesses, and top assembly boxes
• 10+ years of experience
• Demonstrated experience in the resolution of complex part, material, and process anomalies
• Working knowledge of Military and Commercial parts, materials, and process specifications
• Experience working independently and in a team environment
• Experience with Microsoft Office
• Strong communication skills (verbal and written, including presentation skills)
• Ability to travel when needed
 
Job Number: 19-06183
Job Location: Centennial, CO
Rate: Hourly Rate
Duration: 10 months
Start Date: ASAP
Input Date: 07/15/2019
Last Updated: 09/06/2019
Firm Name: AGREEYA SOLUTIONS
Attention: Avijit Sharma
Address: 605 COOLIDGE DR STE 200
City, State: FOLSOM, CA 95610
Phone: 916/294-0075
Website: www.agreeya.com

MP&P Engineer 4

Description:
Chipton-Ross is seeking 2 MP&P Engineer 4's for openings in New Orleans, LA.

RESPONSIBILITIES:
M&P Generalist with some understanding of space propulsion systems. Understanding of spray and pour foam insulation Thermal Protective Systems (TPS) and Cork / Ablator Systems. Understanding of the specifications (STPs / DPIs/ S-201 program specific) regarding these systems/materials and application of such. Familiar with environments necessary for TPS application and the creation / monitoring of these environments for application. Familiarity with damage anomalies associated with transportation, handling and cryogenic tanking and de-tanking of the flight hardware in addition to test firing events. Comfortable with assessing TPS and Cork / Ablator anomalies and provide criteria for Use-as-Is, repair, remove and replace for MRB disposition. or provide direction to use pre-approved program-specific allowances or rework allowables. Familiarity with Contamination Control Specifications and DPIs in support of maintain clean as relating to Visually Clean (VC0, VC1 and VC2) and precision clean surfaces. Understanding of cleanliness requirement related to purge gases and gases exposed to fluid clean systems. Understanding of tests and testing requirements of system or purge gases prior to introduction. Understanding of requirements and specification related to connect and disconnect of Ground Support Equipment (GSE). Familiarity with environments and enclosures required (Controlled Work Area, Controlled Area, Temporary Environmental Control Zones and Draping) when connecting and exposing critical or precision clean surfaces.
Ability to address or capability to reach back in a variety of disciplines as exampled by electrical, adhesives and coatings, contamination, fasteners and metallic anomalies.

EDUCATION:
Technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

TRAVEL: YES - Minimal

FULL TIME/2ND SHIFT
WORK HOURS: 12 HOURS FROM 6:00 PM TO 6:30 AM MONDAY - THURSDAY (PLUS 8 HRS OF OT) AND THE OTHER SHIFT IS A 12 HOUR SHIFT FROM 6:00 PM TO 6:30 AM FRIDAY - SUNDAY (36 HOUR WEEK)

MISCELLANEOUS:
This work assignment has been designated as "safety-sensitive" by the Client. Contractors assigned to safety-sensitive jobs at the Client site must first complete regulatory pre-placement requirements prior to reporting to assignment. Additionally, contractors assigned to safety-sensitive work will be subject to random drug and alcohol testing in accordance with federal mandates.
 
Job Number: 180122
Job Location: New Orleans, LA
Rate: $DOE
Duration: 12 Months
Input Date: 06/28/2019
Last Updated: 10/17/2019
Firm Name: CHIPTON ROSS
Attention: Johnnie Barrientos
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: jbarrientos@chiptonross.com
Website: www.chiptonross.com

MP&P Engineer 4 - Chemical/Contamination

Description:
***Must be able to work Second Shift - 6:00pm to 6:30am***

Familiarity with Contamination Control Specifications and DPIs in support of maintain clean as relating to Visually Clean (VC0, VC1 and VC2) and precision clean surfaces. Understanding of cleanliness requirement related to purge gases and gases exposed to fluid clean systems. Understanding of tests and testing requirements of system or purge gases prior to introduction. Understanding of requirements and specification related to connect and disconnect of Ground Support Equipment (GSE). Familiarity with environments and enclosures required (Controlled Work Area, Controlled Area, Temporary Environmental Control Zones and Draping) when connecting and exposing critical or precision clean surfaces.
Ability to address or capability to “reach back” in a variety of disciplines as exampled by electrical, adhesives and coatings, contamination, fasteners and metallic anomalies.
Skills and Experience Req’d:
M&P Generalist with some understanding of space propulsion systems. Understanding of spray and pour foam insulation Thermal Protective Systems (TPS) and Cork / Ablator Systems. Understanding of the specifications (STPs / DPIs/ S-201 program specific) regarding these systems/materials and application of such. Familiar with environments necessary for TPS application and the creation / monitoring of these environments for application. Familiarity with damage anomalies associated with transportation, handling and cryogenic tanking and de-tanking of the flight hardware in addition to test firing events. Comfortable with assessing TPS and Cork / Ablator anomalies and provide criteria for Use-as-Is, repair, remove and replace for MRB disposition. or provide direction to use pre-approved program-specific allowances or rework allowables.

Education / Experience:
typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.
 
Job Number: 374114
Job Location: New Orleans, LA
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 06/28/2019
Last Updated: 10/17/2019
Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

Maintenance Mechanic

Description:
Chipton-Ross is seeking a Maintenance Mechanic for an opening in Pinellas Park, FL.

RESPONSIBILITIES
Position Description
" Performs various facilities maintenance duties including: Heavy Preventive Maintenance on systems and equipment.
" Performs basic carpentry, electrical, mechanical, air conditioning, plumbing, plastic or sheet metal fabrication, or associated work on plant facilities using power tools.
" Light janitorial duties expected.
" May perform routine inspections to determine repair and maintenance work necessary.

REQUIREMENTS
" Basic equipment/machines repair and troubleshooting skills, for both electrical and hydraulic systems.
" Carpentry and plumbing experience required.
" Strong troubleshooting/diagnostic skills; proficient with multi-meter
" Electrical Controls and PLC experience/troubleshooting (ability to program is desired)
" Hydraulic experience (Pump repair/rebuilding; servo valve repair, etc.) to include reading hydraulic schematics
" Extensive equipment maintenance including HVACR experience (troubleshooting and repair, with EPA 608 cert)
" Light fabrication skills/Mill and Lathe experience (making simple parts like brackets and spacers);
" Commercial plumbing repairs
" Industrial electrical experience (480V, 230V and 120V, running and bending conduit, proper wire sizing for required tasks, etc.)
High School Diploma or equivalent. Mathematical ability to perform and/or understand the calculations used in assigned areas and ability to read and interpret blueprints, specifications and technical data. Competently uses computers and other systems. Work in teams or independently and communicate effectively with all co-workers or supervisory staff.

 
Job Number: 176287
Job Location: Pinellas Park, FL
Rate: $16 to $22.00 DOE
Duration: 12 Months
Input Date: 01/11/2019
Last Updated: 10/17/2019
Firm Name: CHIPTON ROSS
Attention: Cody Reposa
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: creposa@chiptonross.com
Website: www.chiptonross.com

Maintenance Mechanic / mechanical machine repair and high voltage FL

Description:
165328
Job Title: Maintenance Mechanic
Work Site Address: Pinellas Park, FL 33782
Job Number: 5043
Max Pay Rate: 16.00-22.00
Start Date: ASAP
End Date: 12 Months
Position Type: Contract
• Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company.

**They are looking for a candidate that is well rounded in mechanical machine repair and high voltage jobs.


Position Description
• Performs various facilities maintenance duties including: Heavy Preventive Maintenance on systems and equipment.
• Performs basic carpentry, electrical, mechanical, air conditioning, plumbing, plastic or sheet metal fabrication, or associated work on plant facilities using power tools.
• Light janitorial duties expected.
• May perform routine inspections to determine repair and maintenance work necessary.

Required Skills and Education
• Basic equipment/machines repair and troubleshooting skills, for both electrical and hydraulic systems.
• Carpentry and plumbing experience required.
• Strong troubleshooting/diagnostic skills; proficient with multi-meter
• Electrical Controls and PLC experience/troubleshooting (ability to program is desired)
• Hydraulic experience (Pump repair/rebuilding; servo valve repair, etc.) to include reading hydraulic schematics
• Extensive equipment maintenance including HVACR experience (troubleshooting and repair, with EPA 608 cert)
• Light fabrication skills/Mill and Lathe experience (making simple parts like brackets and spacers);
• Commercial plumbing repairs
• Industrial electrical experience (480V, 230V and 120V, running and bending conduit, proper wire sizing for required tasks, etc.)

Typical minimums: High School Diploma or equivalent. Mathematical ability to perform and/or understand the calculations used in assigned areas and ability to read and interpret blueprints, specifications and technical data. Competently uses computers and other systems. Work in teams or independently and communicate effectively with all co-workers or supervisory staff.
 
Job Number: LMPIN-5043
Job Location: Pinellas, FL
Rate: 22/hr max
Duration: 12 months
Input Date: 09/16/2019
Last Updated: 10/16/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer

Lexington, KY
$27.50/hr
6 month W2 contract
First Shift
*MUST HAVE AN ACTIVE SECRET CLEARANCE*

Job Description:
Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling. . Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance. Adapts machine or equipment design to factory and production conditions.

Responsibilities include close coordination and collaboration with the Product Focus Teams, Factory Material Flow, Tool Services, and Facilities in developing and implementing production readiness in each of the component and assembly areas. May incorporate inspection and test requirements into the production plan. Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality. Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques. Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensures processes and procedures are in compliance with regulations.

Basic Qualifications :
•Knowledge of engineering drawing interpretation and tolerances.
•Demonstrated organizational skills
•Proficient with Microsoft Office suite
•Producibility for manufacturing experience.
•Understanding of configuration control principles
•Experience in writing basic manufacturing planning work instructions
Bachelors degree required

Desired skills:
•Experience with material handling, work flow, and process development of complex assemblies, mechanical details, tooling and mechanical system integration
•Dual discipline engineering experience: mechanical and electrical backgrounds
•Lean six sigma training, i.e. green belt, or black belt certified
•Tool fabrication and assembly experience
•Experience with use of Teamcenter Engineering software package
•Bachelor’s degree from an accredited college in Mechanical, or Electrical Engineering, or equivalent experience/combined education,
 
Job Number: 10863
Job Location: Lexington, KY
Rate: 27.50
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 06/04/2019
Last Updated: 08/13/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer

Lexington, KY
$27.50/hr
6 month W2 contract
First Shift
*MUST HAVE AN ACTIVE SECRET CLEARANCE*

Job Description:
Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling. . Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance. Adapts machine or equipment design to factory and production conditions.

Responsibilities include close coordination and collaboration with the Product Focus Teams, Factory Material Flow, Tool Services, and Facilities in developing and implementing production readiness in each of the component and assembly areas. May incorporate inspection and test requirements into the production plan. Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality. Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques. Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensures processes and procedures are in compliance with regulations.

Basic Qualifications :
•Knowledge of engineering drawing interpretation and tolerances.
•Demonstrated organizational skills
•Proficient with Microsoft Office suite
•Producibility for manufacturing experience.
•Understanding of configuration control principles
•Experience in writing basic manufacturing planning work instructions
Bachelors degree required

Desired skills:
•Experience with material handling, work flow, and process development of complex assemblies, mechanical details, tooling and mechanical system integration
•Dual discipline engineering experience: mechanical and electrical backgrounds
•Lean six sigma training, i.e. green belt, or black belt certified
•Tool fabrication and assembly experience
•Experience with use of Teamcenter Engineering software package
•Bachelor’s degree from an accredited college in Mechanical, or Electrical Engineering, or equivalent experience/combined education,
 
Job Number: 10865
Job Location: Lexington, KY
Rate: 27.50
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 06/04/2019
Last Updated: 10/01/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer

Lexington, KY
$27.50/hr
6 month W2 contract
First Shift
*MUST HAVE AN ACTIVE SECRET CLEARANCE*

Job Description:
Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling. . Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance. Adapts machine or equipment design to factory and production conditions.

Responsibilities include close coordination and collaboration with the Product Focus Teams, Factory Material Flow, Tool Services, and Facilities in developing and implementing production readiness in each of the component and assembly areas. May incorporate inspection and test requirements into the production plan. Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality. Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques. Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensures processes and procedures are in compliance with regulations.

Basic Qualifications :
•Knowledge of engineering drawing interpretation and tolerances.
•Demonstrated organizational skills
•Proficient with Microsoft Office suite
•Producibility for manufacturing experience.
•Understanding of configuration control principles
•Experience in writing basic manufacturing planning work instructions
Bachelors degree required

Desired skills:
•Experience with material handling, work flow, and process development of complex assemblies, mechanical details, tooling and mechanical system integration
•Dual discipline engineering experience: mechanical and electrical backgrounds
•Lean six sigma training, i.e. green belt, or black belt certified
•Tool fabrication and assembly experience
•Experience with use of Teamcenter Engineering software package
•Bachelor’s degree from an accredited college in Mechanical, or Electrical Engineering, or equivalent experience/combined education,
 
Job Number: 10864
Job Location: Lexington, KY
Rate: 27.50
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 06/04/2019
Last Updated: 10/01/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer

Lexington, KY
$27.50/hr
6 month W2 contract
First Shift
*MUST HAVE AN ACTIVE SECRET CLEARANCE*

Job Description:
Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling. . Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance. Adapts machine or equipment design to factory and production conditions.

Responsibilities include close coordination and collaboration with the Product Focus Teams, Factory Material Flow, Tool Services, and Facilities in developing and implementing production readiness in each of the component and assembly areas. May incorporate inspection and test requirements into the production plan. Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality. Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques. Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensures processes and procedures are in compliance with regulations.

Basic Qualifications :
•Knowledge of engineering drawing interpretation and tolerances.
•Demonstrated organizational skills
•Proficient with Microsoft Office suite
•Producibility for manufacturing experience.
•Understanding of configuration control principles
•Experience in writing basic manufacturing planning work instructions
Bachelors degree required

Desired skills:
•Experience with material handling, work flow, and process development of complex assemblies, mechanical details, tooling and mechanical system integration
•Dual discipline engineering experience: mechanical and electrical backgrounds
•Lean six sigma training, i.e. green belt, or black belt certified
•Tool fabrication and assembly experience
•Experience with use of Teamcenter Engineering software package
•Bachelor’s degree from an accredited college in Mechanical, or Electrical Engineering, or equivalent experience/combined education,
 
Job Number: 10873
Job Location: Lexington, KY
Rate: 27.50
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 06/04/2019
Last Updated: 08/13/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Manufacturing Engineer - Clearance KY

Description:
1548-1
Manufacturing Engineer
Work Location: Lexington, KY
Status: Open
Qty: 2
Desired Start Date: 5/14/2019
End Date: 11/2/2019

Job Description:
Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling. . Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance. Adapts machine or equipment design to factory and production conditions. Responsibilities include close coordination and collaboration with the Product Focus Teams, Factory Material Flow, Tool Services, and Facilities in developing and implementing production readiness in each of the component and assembly areas. May incorporate inspection and test requirements into the production plan. Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality. Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques. Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensures processes and procedures are in compliance with regulations.

*Basic Qualifications:
•Knowledge of engineering drawing interpretation and tolerances.
•Demonstrated organizational skills
•Proficient with Microsoft Office suite
•Producibility for manufacturing experience.
•Understanding of configuration control principles
•Experience in writing basic manufacturing planning work instructions
Desired skills :
•Experience with material handling, work flow, and process development of complex assemblies, mechanical details, tooling and mechanical system integration
•Dual discipline engineering experience: mechanical and electrical backgrounds
•Lean six sigma training, i.e. green belt, or black belt certified
•Tool fabrication and assembly experience
•Experience with use of Teamcenter Engineering software package
•Bachelor’s degree from an accredited college in Mechanical, or Electrical Engineering, or equivalent experience/combined education

Level: Level 1: BS+0-2 YRS
Pay Rate: $15.00 - $50.00 Hourly
 
Job Number: JE-1548-1S
Job Location: Lexington, KY
Rate: 50/hr max
Duration: 6 months
Input Date: 10/15/2019
Last Updated: 10/16/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer - Clearance KY

Description:
1549-1
Manufacturing Engineer
Work Location: Lexington, KY
Status: Open
Qty: 1
Desired Start Date: 5/14/2019
End Date: 11/2/2019

Job Description:
Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling. Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance. Adapts machine or equipment design to factory and production conditions. Responsibilities include close coordination and collaboration with the Product Focus Teams, Factory Material Flow, Tool Services, and Facilities in developing and implementing production readiness in each of the component and assembly areas. May incorporate inspection and test requirements into the production plan. Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality. Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques. Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensures processes and procedures are in compliance with regulations.

*Basic Qualifications :
•Knowledge of engineering drawing interpretation and tolerances.
•Demonstrated organizational skills
•Proficient with Microsoft Office suite
•Producibility for manufacturing experience.
•Understanding of configuration control principles
•Experience in writing basic manufacturing planning work instructions

Desired skills :
•Experience with material handling, work flow, and process development of complex assemblies, mechanical details, tooling and mechanical system integration
•Dual discipline engineering experience: mechanical and electrical backgrounds
•Lean six sigma training, i.e. green belt, or black belt certified
•Tool fabrication and assembly experience
•Experience with use of Teamcenter Engineering software package
•Bachelor’s degree from an accredited college in Mechanical, or Electrical Engineering, or equivalent experience/combined education,

Level: Level 1: BS+0-2 YRS
Pay Rate: $15.00 - $50.00 Hourly
 
Job Number: JE-1549-1S
Job Location: Lexington, KY
Rate: 50/hr max
Duration: 6 months
Input Date: 06/05/2019
Last Updated: 08/19/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com