Job Search Results

746 listings were found that matched your search words: Keywords: Aircraft ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2020/12/02 Wednesday 01:51PM Pacific Time by ContractJobHunter. )

Listings 1 - 746

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2 System Design Engineers - hydraulics, Landing Gear or fuel Systems Experience Needed

Description:
Seeking System Design Engineers with 10+ years of experience with detail design of mechanical systems. (hydraulics, landing gear or fuel, etc.) utilizing Catia V5. BS Degree required.

***1 position is located in Manassas, VA and 1 position will be located in Cambridge, MA.***


Duties:
Design aircraft mechanical systems based on customer requirements
Establishes manufacturing tolerances for production of components using GD&T
Design for Manufacturing (DFMA)
Supports review of manufacturing plans and procedures to ensure compliance with design requirements


Requirements:
Bachelor’s degree in Mechanical or Aerospace Engineering from an accredited institution much preferred.
Experience with CATIA V5
Experience in detail design of aircraft mechanical systems, or aircraft composite/metallic structure.
Experience designing hydraulics, landing gear or fuel systems.
DFM experience required
Minimum of 10+ years of experience as a design engineer within the aircraft industry.
Experience with Model Based Definition and GD&T
Experience with Product Lifecycle Management tools (PLM software), Requirements management tools and configuration management
US Citizen required



The Structures Company is an AA/EOE.
 
Job Number: 278
Job Location: VA & MA
Rate: $75-$78/Hr.
Per Diem: Yes
Duration: 9 Months - Possibly longer
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2560 - AVIONICS SYSTEMS ENGINEER - cv, word doc only

Description:
Interfacing with customers (both internal and external) during definition and implementation of avionic system integration.

Execute program milestones according to established schedule and ensure critical path and key dependencies are effectively managed to achieve successful outcome.

Reviewing detailed execution plans and schedules with the project management team to ensure adequacy, completeness, and harmonization with the overall program level plan.

Generating system requirements documents for physical and logical interfaces.

Defining cockpit display formats and control operation in conjunction with the customer.

Developing and running functional test procedures for all avionics sub-systems.

Advising the customer on the physical installation of avionics equipment.

Troubleshooting and diagnosing avionics problems on the systems integration rig and flight test aircraft (may involve travel)

Documenting, tracking, and resolving avionics problems resulting from both design errors and equipment failures.

Generating certification documents for subsystems demonstrating compliance with OEM certification plans.

Supporting Change Management related activities at the program level.

Bachelor's Degree in applicable engineering or science field, and ten years of related experience, or, in the absence of a bachelor's degree, sixteen years of related experience.

Detailed systems knowledge is required in at least five of the following systems: AFCS, Air Data, Cockpit Audio, Cockpit Printers, Datalink, EFIS, EICAS, Enhanced Vision Systems, FANS, FMS, GPS, Graphical Datalink Weather, HUD, Integrated Modular Avionics (IMA), On-board Maintenance Systems, Radio Altimeters, Synthetic Vision Systems, TAWS, TCAS/Transponders, VHF Comm, VHF Nav, XM Weather.

Analysis - thinking through a logical, in-depth analysis of a problem or situation.

Cooperation - Serves as a role model to his or her coworkers by demonstrating respect and sensitivity for fellow workers and promoting open discussion of issues.

Coordinating - Provides a seamless stream of communication and support.

Customer Service Orientation - Fully comprehends the value of the organization's customers and champions strategies to ensure world-class service.

Dependability - Consistently produces exemplary results that can be used as prototypes for future projects.

Judgment - Able to quickly assess the costs, benefits, and risks of a decision while using sound logic to ultimately make well-informed decisions.
 
Job Number: 2560
Job Location: Toronto, Canada
Rate: 85.00
Per Diem: No
Overtime: 1.5
Duration: Long Term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2469 - AVIONICS/ELECTRICAL SYS. - AFTERNOON, MIDNIGHT & WEEKEND SHIFT

Description:
Provide Avionics Engineering support to the Client Final Line Assembly during afternoon, midnight and weekend shift.

Witness system functional testing and conduct technical investigations on Electrical and Avionic systems related issues, analyze and develop solutions/recommendations and reports. Disposition RFCs, RNCs, and Supplement 2s as required.

Review functional test requirements and ensure translation into mature functional tests.

Track and ensure successful implementation of systems installations and modifications.

Work with the product development team to assist with technical proposal activities, including preparation of written material and presentations. Recommend and review design changes.

Develop good working relationships with various departments within BA and with all suppliers.

Bachelor of Engineering Degree and eligibility for Professional Engineer registration.

AME license is an asset.

Experience in providing engineering support to a Final Line/ Production.

15 years' experience in aircraft electrical systems and or avionics systems (Electrical Generation, Distribution, Lighting, Navigation, Communication, Displays, EICAS, Data Concentration System, AFCS, Stall System, OMS, FDR, CVR etc).

Conversant with design, qualification and certification test requirements of Aircraft Electrical and or Avionic systems.

Have flexibility to travel.

Familiar with Part 25 certification requirements and advisory material.

Possess strong integration skills, in both system partner management and system technical integration.

Familiar with Microsoft Office software tools.

Strong communication skills, ability to work well in a multi-disciplinary team environment.

Regular work day, some flexibility required:

Afternoon Shift (3:30 to 12:00) ;

Midnight Shift = (11:00 PM to 6:30 AM);

Weekend Shift = Friday, Saturday, Sunday and Monday.
Friday (3:30 PM -12:00 (midnight)),
Saturday (6:00 AM to 6:00 PM),
Sunday (6:00 AM to 6:00 PM)
Monday (8:00 AM 8 to 4:30 PM)
 
Job Number: 2469
Job Location: Canada
Rate: 62.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2471 - PROPULSION/PNEUMATIC SYSTEMS - AFTERNOON SHIFT

Description:
Provide Propulsion/Pneumatic Engineering support to the Client Final Line Assembly during afternoon shift.

Witness system functional testing and conduct technical investigations on Propulsion and Pneumatic systems related issues, analyze and develop solutions/recommendations and reports. Disposition RFCs, RNCs, and Supplement 2s as required.

Review functional test requirements and ensure translation into mature functional tests

Track and ensure successful implementation of systems installations and modifications

Work with the product development team to assist with technical proposal activities, including preparation of written material and presentations. Recommend and review design changes

Develop good working relationships with various departments within BA and with all suppliers

Bachelor of Engineering Degree and eligibility for Professional Engineer registration. AME license is an asset

Experience in providing engineering support to a Final Line/ Production

15 years' experience in aircraft Propulsion and/or Pneumatic systems (High and Low Pressure Ducting, Environmental Control System, Avionics Cooling, Oxygen System, Power plant, Fuel systems, etc)

Conversant with design, qualification and certification test requirements of Propulsion and/or Pneumatic systems

Have flexibility to travel.

Familiar with Part 25 certification requirements and advisory material.

Possess strong integration skills, in both system partner management and system technical integration

Familiar with Microsoft Office software tools

Strong communication skills, ability to work well in a multi-disciplinary team environment.

Regular work day, some flexibility required:

Regular Shift = Afternoon Shift (3:30 to 12:00) ;
 
Job Number: 2471
Job Location: Canada
Rate: 62.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2500 - ELECTROMAGNETIC COMPATIBILITY (EMC) ENGINEER - cv, word doc only - On Hold

Description:
Responsible at the aircraft and system level for Electromagnetic Compatibility (EMI)/High Intensity Radiated Fields (HIRF)/Lightning Strike/ Electrostatic Discharge technical requirements.

Knowledge of relevant industry standards (RTCA/DO-160, SAE ARP) and high level of familiarity with airworthiness (TCCA, FAA, EASA) Regulations and Advisory Materials pertaining to EMI, HIRF, Lightning and Electrostatic Discharge.

Execute intermediate to complex engineering assignments related to EMI, HIRF, and Lightning and Electrostatic Discharge requirements.

Analyze new systems designs, assess technical impacts, propose EMC compliance approaches, review/approve technical documents, test plans, test procedures and test reports, and check compliance with certification regulations.

Define scope of work for EMC effort of technical/engineering projects, estimate the time required, plan, highlights technical risks and execute according to priorities.

Define technical requirements, test requirements and perform detailed analysis to ensure aircraft and systems compliance to EMC certification regulations.

Prepare EMI, HIRF, Lightning and Electrostatic Discharge test procedures, execute tests in laboratories and on aircraft and generate results and analysis test reports.

Support and witness EMC tests in Canada, United States and Europe as needed.

Master degree in Electrical or EMC Engineering, or alternatively a Bachelor's degree in Electrical or Physics Engineering with a minimum of eight (5) years of experience in aircraft EMC/HIRF/Lightning/Electrostatic Discharge (FAR 25.981 is an asset).

8 years of experience or more in an aerospace manufacturing company.

Have EMC bench and/or aircraft testing experience.

Have a minimum of five (5) years working experience with systems qualification/certification.

Knowledge of harness design, aircraft design principles including familiarity with aircraft regulatory requirements.

Proficient with the use of PC including Microsoft Office software tools.

Energetic person with strong written and oral communication and interpersonal skills, a high sense of commitment, and a willingness to accept responsibilities while acting independently in a high-pressure partner/supplier team environment.

Must be familiar with DO160, STD ARP, MIL STD, FAA regulations, as well as other applicable airworthiness regulations.

Must be able to analyze modifications at aircraft level and check compliance with certification regulations.

Must be able to support and witness EMC tests in Canada, United States and Europe as needed.
 
Job Number: 2500
Job Location: Montreal, Canada
Rate: 52.00
Per Diem: Paid 3 Months only
Overtime: Paid NOT at 1.5
Duration: 36+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2523 - HYDRO-MECHANICAL SYSTEMS ENGINEER - cv, word doc only - On Hold

Description:
Take part in the integration of the flight control, hydraulic and/or landing gear system for the definition, specification, design, analysis, modification, test and certification of hydro-mechanical systems

Coordinate product development activities between the supplier of the system and the affected work packages

Ensure successful design, validation, certification and delivery of the system

Ensure successful completion of each development phase deliverables (may author, review, approve)

Problem solve the technical issues in a cross functional environment

Be involved in the design and integration of the system

Review the design and documentation of all the aspects related to your system

Check for quality of the Supplier's analyses

Validate and verify system requirements as well as system performance through design reviews, analyses, rig and aircraft testing

Define, prepare and execute qualification and certification tests

Work with supplier in the investigation and resolution of test findings

Bachelor or Master's (preferred) degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of five (5) to seven (7) years

Background in design, integration, development and certification of Hydro-Mechanical Systems

Cognizant of the relevant Airworthiness Regulations and certification process

Good oral and technical writing skills in English (required)

Motivated, self-starter, organized, autonomous and able to work under limited supervision

Team player and able to work with suppliers and customers

Dynamic person with initiative, a strong sense of responsibility and good judgment

Knowledge of MS Office software (essential)

Knowledge of CATIA, Matlab, Simulink (an asset)
 
Job Number: 2523
Job Location: Toronto, Canada
Rate: 57.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2524 - PROPULSION SYSTEMS ENGINEER - cv, word doc only

Description:
Design and integration of the system.

Review of the design and documentation of all the aspects related to your system.

Checking for quality of the Supplier's analyses.

Validation and verification of system requirements.

Validation and verification of system performance through design reviews, analyses, rig and aircraft testing.

Definition, preparation and execution of qualification and certification tests.

Working with supplier in the investigation and resolution of test findings.

Preparation or review of qualification or certification reports.

Working with suppliers to establish complete system requirements and system interfaces.

Liaison with stress, loads, reliability, maintainability and safety (RM&S), simulation, customer and operations support departments.

Identify issues and obstacles, follow-up and communicate progress.

Prepare reports or presentations.

Bachelor or Master's (preferred) degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of five (5) to seven (7) years.

Background in design, integration, development and certification of Propulsion Systems.

Cognizant of the relevant Airworthiness Regulations and certification process.

Good oral and technical writing skills in English and French (required).

Motivated, self-starter, organized, autonomous and able to work under limited supervision.

Team player and able to work with suppliers and customers.

Dynamic person with initiative, a strong sense of responsibility and good judgment.

MS Office software (essential).

Good knowledge of DO-160, FAR/CAR25 Regulations.

Previous experience in providing engineering support to a Final Line/Production would be an asset.
 
Job Number: 2524
Job Location: Toronto, Canada
Rate: 57.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2525 - METHODS ENGINEER - AFTERNOON SHIFT - cv, word doc only

Description:
Support the Client Final Line Assembly activities for a timely resolution of production line issues related to system integration.

Witness system functional testing and conduct technical investigations / troubleshooting on Hydro-Mechanical Systems (ATA 27, ATA 29, ATA 32), analyze and develop solutions / recommendations.

Support production to resolve non-conformance (NCR), tooling issues and procedure clarification / correction.

Track and ensure successful implementation of systems installations and modifications

Support the line by producing return into service (RTS) documentation.

Develop good working relationships with various departments within BA and with all suppliers

Bachelor Degree in Engineering or Master Degree (Aerospace Manufacturing, Aircraft Maintenance etc.).or a diploma from a technical college.

3-8 years%u2019 experience in aircraft Electrical and Avionics systems (Communication, Electrical Power, Indication/Recording Systems, Navigation, and Information Systems)and / or in Hydro-Mechanical Systems (Fly-by-Wire systems, Wing High-Lift, Landing gear, Hydraulic Systems).

Experience in providing support / troubleshooting to Aircraft Maintenance / Final Line / Production Line / Test Bench / Simulator.

Are process oriented.

Possess strong analytical skills, you are a quick learner.

Are a team player, able to work in high-stress environment.

Have excellent interpersonal and communication skills.

Autonomous persons, capable of managing time and prioritites

Must have a good knowledge of MS Office and Requirements Management tools.

Knowledge of SAP is an asset.

Knowledge of MES is an asset.
 
Job Number: 2525
Job Location: Toronto, Canada
Rate: 51.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2527 - AVIONICS ISE ENGINEER - 2527 - cv, word doc only

Description:
Lead resolution of technical in service issues for the Client Family of aircraft.

Coordinate technical investigations with other engineering disciplines, suppliers and aircraft operators.

Prepare and issue Electrical and Avionics related product changes, modifications and repairs.

Answer technical queries from the Field Service Representatives and the airline operators.

Be involved in operators' conferences and operator technical reviews.

Analyze and approve new system concept proposals and integrate them in aircraft documentation.

Prepare functional test engineering requirements (FTER), Test definition Sheets (TDS) and avionics systems certification reports.

Coordinate with system suppliers to achieve good integration.

Communicate and coordinate with Transport Canada's design approval designees (DADs).

Investigate avionics system problems identified on aircraft in service or in production. Provide engineering dispositions. Support Continuous Airworthiness (CAW) processes.

Bachelor Degree in Aeronautical Engineering or equivalent.

Must be a team player showing initiative, have a strong sense of responsibility and possess good technical and commercial judgment.

Must have at least 10 years relevant experience with the specification, design, development, integration, test and certification of Avionics systems on aircraft.

Knowledge of certification requirements is required.

Technical experience on the Client family of aircraft is an asset.

Must have strong English (written and spoken) communication skills.

Must be capable of working under pressure, be attentive to details, have good planning skills and be fully committed to accomplishing work on time and on schedule.

Must be computer literate and familiar with commonly used software (MS Office).

Catia V5 experience is an asset.

Must have strong investigative skills.

Are self-starter, enthusiastic, well organized and customer oriented.

Previous experience with Network Security or (FMS) Flight Management System or Autoflight and generic working knowledge of Navigation and communication system is required.

Familiarity with part FAR25 / 525 certification process is an asset.

Experience with civil aircraft and airworthiness authorities is an asset.
 
Job Number: 2527
Job Location: Mirabel, Canada
Rate: 55.00
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 36+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2528 - ELECTRICAL SYSTEMS ENGINEER - cv, word doc only

Description:
Integrate electrical systems on Client family of aircraft (including power generation systems, electrical wiring interconnection systems (EWIS), lighting systems, etc.).

Ensure that all new electrical system concepts meet applicable aircraft system requirements (FAR, RTCA DO160, etc.) and to Client Aerospace requirements and practices.

Prepare requirement documents including technical quotations, system schematics, technical requirement documents (TRD) and statement of work (SOW).

Analyze and approve new system concept proposals and integrate them in aircraft documentation.

Prepare functional test engineering requirements (FTER), Test definition Sheets (TDS) and electrical systems certification reports.

Coordinate with system suppliers to achieve good integration.

Communicate and coordinate with Transport Canada's design approval designees (DADs).

Provide the required electrical expertise and support for the integration of all other aircraft systems (avionics, hydromechanical, pneumatics, propulsion, etc.).

Investigate system problems identified on aircraft in service or in production. Provide engineering dispositions and repair procedures.

Create electrical system schematics and review system

University degree in Engineering or equivalent.

Must be a team player showing initiative, have a strong sense of responsibility and possess good technical and commercial judgment

Must have at least 5 years relevant experience with the specification, design, development, integration, test and certification of Electrical systems on aircraft.

Technical experience on the Client family of aircraft is an asset.

Must have strong English (written and spoken) communication skills.

Must be capable of working under pressure, be attentive to details, have good planning skills and be fully committed to accomplishing work on time and on schedule.

Must have abilities in AutoCAD/AutoSketch.

Must be familiar with part FAR25 / 525 certification process.

Must be computer literate and familiar with commonly used software (MS Office).
 
Job Number: 2528
Job Location: Mirabel, QC, Canada
Rate: 58.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2529 - HYDRO-MECHANICAL SYSTEMS ENGINEER

Description:
Integrate hydromechanical systems on CRJ Family of aircraft (including landing gear, flight control, hydraulic systems, etc.).

Provide the required hydromechanical expertise and support for the integration with other disciplines (including design, RM&S, airworthiness, electrical, avionics,
propulsion, etc.).

Coordinate with system suppliers to achieve good integration.

Investigate system problems identified on aircraft in service or in production.

Provide engineering dispositions and repair procedures.
Support Continuous Airworthiness (CAW) processes.

Analyze and approve new system concept proposals and integrate them in aircraft documentation.

Ensure that all new hydromechanical system concepts meet applicable aircraft system requirements (FAR, RTCA DO160, etc.) and Client Aerospace requirements and practices.

Communicate and coordinate with Transport Canada's design approval designees (DADs).

Prepare requirement documents including technical quotations, system schematics, TRDs and statement of work (SOW).

Prepare and/or review system definition drawings, qualification documentations, functional test engineering requirements (FTER), Test definition Sheets (TDS), design compliance reports, reliability reports and other system certification
reports.

Provide technical support to the production line and to in-service aircraft as required.
University degree in Engineering or equivalent experience, in the mechanical field. A specialization in aeronautical applications is desirable.

Technical experience on the Client family of aircraft is an asset.

Must have strong English (written and spoken) communication skills.

Manage various projects under strict budget and schedule requirements.

Are able to manage conflicts and solve problems.

Are self-starter, enthusiastic, well organized and customer oriented.
 
Job Number: 2529
Job Location: Mirabel, QC, Canada
Rate: 54.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2535 - PROGRAM ANALYST - CHNG. MGMNT - cv, word doc only

Description:
Understand aircraft component assembly and manufacturing strategies as well as the impact on program strategies.

Identify the key risks of the project, including mitigation / reduction strategies.

Harmonize the implementation of engineering changes or assembly strategy by working closely with engineering, material logistics, quality and production departments.

Ensure a flawless implementation of change management on the production line.

Develop and implement targets and monitoring mechanisms to track performance and progress, prepare status reports and modify timelines and schedules as required.

Influencing (leadership) the day-to-day multidisciplinary team towards the achievement of program objectives.

Climb to the appropriate level of management when required.

Bachelor Degree in mechanical engineering, avionics, electrical, industrial, or electromechanical, in aeronautical manufacturing or in a related discipline.

Have experience in the aeronautical industry.

Have more than five (5) years of relevant experience.

Have initiative, are result-oriented and have the desire to make decisions.

Have strong leadership skills, as well as strong analytical, planning and problem solving skills.

Have excellent communication skills (written and spoken) and are able to influence at different levels of the organization.

Are able to work under pressure with tight deadlines while delivering quality results.

Are using the MS Office suite effectively (Word, Excel, PowerPoint, and Project).

Are fluent in English and French, both written and spoken.
 
Job Number: 2535
Job Location: Montreal, Canada
Rate: 51.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2536 - DESIGN ENGINEER - cv, word doc only

Description:
Participate in design reviews and exchange / communicate your thoughts.

Provide estimate of design related activities.

Support suppliers, production and final line installations.

Bachelor Degree in Mechanical or Aerospace engineering or equivalent with a minimum of five (5) years of relevant experience.

Possesses or cumulate experience in:
Design of aircraft structures with CATIA V5/FiberSim.
Ability to understand complex engineering issues .
General computer skills.

Must be a self-motivated person, a team player able to work under pressure and under a minimum of supervision.

Have an excellent record of meeting your commitments with success.

Bilingual - possess strong communication skills in both French and English.
 
Job Number: 2536
Job Location: Mirabel, QC, Canada
Rate: 51.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2544 - PROPULSION SYSTEM / FUEL ENGINEER - cv, word doc only

Description:
Design and integration of the system.

Review of the design and documentation of all the aspects related to your system.

Checking for quality of the Supplier's analyses.

Validation and verification of system requirements.

Validation and verification of system performance through design reviews, analyses, rig and aircraft testing.

Definition, preparation and execution of qualification and certification tests.

Working with supplier in the investigation and resolution of test findings.

Preparation or review of qualification or certification reports.

Working with suppliers to establish complete system requirements and system interfaces.

Liaison with stress, loads, reliability, maintainability and safety (RM&S), simulation, customer and operations support departments.

Provide support to business units in Propulsion Control requirement definition, verification and validation, following ARP4754.

Identify issues and obstacles, follow-up and communicate progress.

Prepare reports or presentations.

Bachelor or Master's (preferred) degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of ten (10) years.

Possess very good knowledge in Propulsion Control Systems and their integration on the aircraft.

Have a background in design, integration, development and certification of Propulsion Systems.

Are cognizant of the relevant Airworthiness Regulations and certification process.

Have good oral and technical writing skills in English and French (required).

Are motivated, self-starter, organized, autonomous and able to work under limited supervision.

Are a team player and able to work with suppliers and customers.

Are a dynamic person with initiative, a strong sense of responsibility and good judgment.

Have knowledge of MS Office software (essential).
 
Job Number: 2544
Job Location: Montreal, Canada
Rate: 56.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2550 - PROJECT MANAGEMENT - METHODS - cv, word doc only

Description:
Analyze the feasibility and impacts of requests for changes from the program management group (PCR, RFQ ...).

Plan and implement changes by ensuring logical sequencing aligned with key aircraft milestones.

Support production on technical issues.

Participate in the improvement of manufacturing processes.

Participate in the development and updating of processes and procedures methods.

Collaborate with stakeholders (project management, logistics, production, quality).

Participate in continuous improvement through the system achieve excellence.

Bachelor Degree or Technologist (DEC / College Degree)

3-5 years of experience and more in aeronautics or as agent methods.

Have a good sense of organization, planning and problem solving.

Have a developed client spirit, good communication skills and are comfortable working with multidisciplinary teams.

Are functional in the English language, both spoken and written.

Good adaptability, you are mobile and flexible.

Comfortable reading drawings, technical specifications and have some knowledge of the various manufacturing processes (assembly, sub-assemblies, parts details, composite manufacturing, installation of systems, etc.).

Knowledge of BANN, CATIA V5, and ENOVIA will be considered assets
 
Job Number: 2550
Job Location: Montreal, Canada
Rate: 51.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2551 - REPAIR DESIGNER - ISE STRUCTURES - cv, word doc only

Description:
Actively support the Client Aircraft design team to ensure customer expectations are met.

Design generic repairs for metallic and composite structures.

Design specific repairs for damages exceeding Aircraft Structural Repair Publication (ASRP) limitations.

Support operators with technical support on repair-ability of their Client Aircraft fleet.

Perform investigation on in-service structural issues affecting reliability, dispatch-ability and repair-ability.

Participate in the design and support of structural modifications.

Represent Client Customer Support in internal and external committees.

Participate in the continuous improvement initiatives of the Customer Support organization.

Bachelor degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of five (5) years in the aerospace industry.

Detailed knowledge of CATIA V5 (preferably R19) and Enovia.

Are comfortable in interrogating aircraft structure repair.

Knowledge of MS Office software (Word, Excel, PowerPoint, etc).

Dynamic person with initiative, a strong sense of responsibility, customer oriented and good judgment.

Are organized, able to manage your time and prioritize tasks effectively, while working toward tight deadlines.

Bilingual - have strong, written and spoken, communication skills in English and French.

Available for occasional travel on short notice.

Having knowledge of Client Aircraft engineering, drawing and configuration control systems is an asset.

Having detailed knowledge of airline operation, engineering and maintenance is an asset.
 
Job Number: 2551
Job Location: Mirabel, Canada
Rate: 55.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2 Aircraft Stress Engineers - Composites

Description:
Aircraft composite stress engineering contractors needed.
MUST BE US PERSONS.
Ability to work in a fast paced environment.
MUST have a good Composites Primary Airframe Structures background.
FAR 23 experience is a huge plus.
Classical hand analysis, Nastran, FEMAP a plus
US PERSONS REQUIRED

Position Responsibilities
This is a Senior Level Contract Stress Analyst position.
General Minimum Requirements:
• Education: MS with 8+ years, or BS with 1O+ years of relevant experience
• Create engineering criteria and analysis methods to ensure that the work meets all program requirements (e.g., airworthiness, customer requirements, internal methods and processes, etc.).
• Actively develop and evaluate plans for activities and soundness of proposed methods and analysis to meet the program schedules and airworthiness standards.
• Select appropriate material systems for structures applications and identify all material testing requirements.
• Identify and communicate technical risks to the relevant stake holders through program status reports in a timely manner.
• Review all program critical documents such as stress reports, manufacturing plans and procedures, and structural test plans in a timely manner to ensure compliance with design and loads requirements.
• Resolve complex engineering issues in creative and effective ways as to balance technical product, cost, and schedule.

Must be a US Citizen, or Greencard holder.

THE STRUCTURES COMPANY IS AN AA/EOE
 
Job Location: Manassas, VA
Rate: $75-85/hr DOE
Per Diem: Yes
Overtime: Possible
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Analysis Engineer

Description:
Qualifications:
• Must have experience with aircraft primary structures
• Deep understanding of Theoretical Statics and Strength of Materials.
• Experience in aircraft or spacecraft composite fabrication, design, and analysis processes
• Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures
• Minimum 5 years or more of applicable experience in the analysis of structural systems using strength of materials and finite element based methods
• Experience with free-body diagrams and classical stress analysis techniques
• Hands-on experience with composites part fabrication and assembly processes and proficiency in FEMAP.
• Pilot, aircraft homebuilding and rapid prototyping experience a strong plus
• Excellent verbal and written communication skills
• Excellent organizational and problem-solving skills
• Excellent computer skills, including Outlook, Word, Excel and PowerPoint
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
• Experience with manufacturing-based ERP systems, such as Oracle, is a plus
• Applicants mut be “U.S. persons” as defined by the ITAR (22 CFR §120.15)

Educational Requirements
• Bachelor’s degree from an accredited institution, with a concentration in a relevant Engineering discipline


The Structures Company is an AA/EOE.
 
Job Number: 71
Job Location: Mojave, CA
Rate: $75-$85/Hr. ***DOE***
Per Diem: Yes
Overtime: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

3 Aircraft Stress Engineers with Composites

Description:
3 Aircraft Composite Stress Engineers Needed.
Require 10+ years of aircraft/aerospace stress analysis with a good composites background.
Previous FEMAP experience is a plus.
Composite airframe analysis experience a MUST.
MUST be US Persons

Qualifications:
-Experience in aircraft or spacecraft composite, design and analysis processes
-Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures
-Minimum 10 years or more of applicable experience in the analysis of structural systems using strength of materials and finite element based methods
-Experience with free-body diagrams and classical stress analysis techniques
-Experience with FEMAP
-Rapid prototyping experience a strong plus
-Excellent computer skills, including Outlook, Word, Excel and PowerPoint
-Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
-Applicants must be U.S. persons as defined by ITAR
Educational Requirements-
Bachelors degree from an accredited institution, with a concentration in a relevant Engineering discipline

The Structures Company is an AA/EOE.
 
Job Location: Mojave, CA
Rate: $80-85/hr DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Last Updated: 12/02/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: chrissheets@thestructurescompany.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Analysis Engineer

Description:
Requirements:

Looking for someone with at least 2 years of primary composite Stress Analysis experience.
Extensive experience developing and running finite element internal loads models.
Extensive experience calculating strength and updating Global FEM properties
Experience with full scale static testing is a plus.
Must have experience with FEA/FEM tools like Nastran, Patran, or FEMAP.
Writing certification reports is a plus
Experience with light aircraft a plus. Experience with larger aircraft is ok as long as the experience was with composite structure.
Experience and a high level of comfort working in undefined environment and ability to work without direction.


Job description:

This is a Senior-Level stress analyst position in the Aerostructures Engineering Organization. General responsibilities include leading and coordinating the stress activities within an assigned project, establishing and communicating clear task expectations, defining engineering criteria and analysis methods to ensure consistency, and reviewing analysis and reports for accuracy and conformance with program requirements.


The ideal candidate for the Senior Airframe Stress Analyst will possess the following skills and experience:
Act as the first level of authority within the team for technical approval and exercise latitude in determining technical objectives of programs.
Must have a thorough working knowledge of the design of flight vehicles or vehicle systems to a set of requirements or standards such as 14 CFR Part 23 and Part 25, MIL-HDBK-516C, or NASA Procedural Requirements as they relate to certification of airframe structures.
Leveraging diversified knowledge and engineering experience, provide directions and coordinate work within the assigned analysts and actively participate in daily operations as required to meet schedules and resolve issues.
Work with inter-disciplinary teams such as Design, Loads, Materials & Processes and Manufacturing groups to provide solutions to mitigate form, fit, function, producibility, and maintainability aspects of airframe structural designs.
Excellent verbal and written communication skills, including strong interpersonal and communication skills in dealing with program management and customers.
Demonstrate proficiency in FEA tools.


Responsibilities:
Create appropriate engineering criteria and analysis methods to ensure that the work meets all program requirements (e.g., airworthiness, customer requirements, internal methods and processes, etc.).
Actively develop and evaluate plans for activities and soundness of proposed methods and analysis to meet the program schedules and airworthiness standards.
Select appropriate material systems for structures applications and identify all material testing requirements.
Identify and communicate technical risks to the relevant stake holders through program status reports in a timely manner.
Review all program critical documents such as stress reports, manufacturing plans and procedures, and structural test plans in a timely manner to ensure compliance with design and loads requirements.
Resolve complex engineering issues in creative and effective ways as to balance technical product, cost, and schedule.
Mentor, coach and motivate the stress team members in every way possible.


Minimum Requirements (education and experience):
4 year engineering degree from an accredited university (BS in Mechanical Engineering, Aerospace Engineering or similar)
8+ years of applicable experience with a Master degree or 10+ years of applicable experience with a Bachelor degree
Demonstrated ability to use Microsoft Excel, Word and Powerpoint


The Structures Company is an AA/EOE.
 
Job Number: 243
Job Location: VA
Rate: $80-$85/HR. **DOE**
Per Diem: Yes
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineers

Description:
Skill set:
Must have Primary and secondary structural design experience. Light aircraft (FAR 23) is preferred.

Excellent detail design skills, along with a combination of composites and metal part and assembly design background. Must have CATIA V5 and CPD experience (composite part design workbench in CATIA).


Position Responsibilities
Under the direction of project design engineering, serve as a member of a design team providing structural detail design for commercial light/general aviation aircraft. The main product line will require design-to-build activities for a commercial (Far 23) aircraft composed of primary/secondary metallic structure (some composite).

Minimum Requirements
· US Citizen, Green Card Holder or Permanent Residence Status
· A degreed candidate is highly desired
· 10 years of experience in Aerospace design is a minimum
· CATIA v5 (R25/R26 preferred)
· Entirely 3D CAD Design using Model Based Definition (MBD)
· Experience with ENOVIA\SmarTeam
· Experience with FAR 23 aircraft is preferred

The Structures Company is an AA/EOE.
 
Job Number: 242
Job Location: Manassas, VA
Rate: $72-$75/Hr. **DOE**
Per Diem: Yes
Duration: 9 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
APG Mechanic URGENT URGENT / no clearance / 3 years’ experience of C-130 Flight Line experience required SC

Description:
164387 Job Title: APG Mechanic

Work Site Address: Greenville, SC 29605
Max Pay Rate: 25-29/hr DOE
Start Date: ASAP
End Date: 9 months
Position Type: Contract
1 more opening
• Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company.

Job Summary:
Inspects, troubleshoots, repairs, overhauls and modifies aircraft systems and powerplants in accordance with established written procedures, specifications, and standards. Candidate must be knowledgeable in aircraft systems operation and maintenance to include landing gear, powerplants, flight controls, disassembly, reassembly, rigging and aircraft movement.

Must be able to read and speak English. Comprehend documents such as safety rules, operating maintenance instructions and procedure manuals.

Mission essential functions and other duties may be assigned as required.

Qualifications and Education Requirements
• Candidate must possess at minimum, 3 years of C-130 Flight Line Experience
• Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company

In order to perform the essential functions of this job, the employee is regularly required to perform repetitive movements, work overhead, use hands to grasp, handle, and/or feel, reach with hands and arms. The employee is frequently required to stand, walk, stoop, kneel, squat, crawl, twist, and work on or in the aircraft. The employee is occasionally required to sit, climb, and balance. The employee must frequently lift and/or push or pull up to 25 pounds and occasionally lift and/or push or pull up to 50 pounds. Specific vision abilities required by this job include close vision, peripheral vision, depth perception and ability to adjust focus. While performing the essential functions of this job, the employee will be required to wear Personal Protective Equipment (PPE) as needed to perform job tasks. The employee is regularly exposed to vibration. The candidate will be frequently exposed to moving mechanical parts, fumes or airborne particles. The candidate must be able to properly use, handle and dispose of hazardous materials, and toxic or caustic chemicals per Government regulations and company procedures. The employee is occasionally exposed to wet and/or humid conditions, high, precarious places, and outside weather conditions. The candidate is required to work in a safe and efficient manner while maintaining a clean, FOD-free work area.

Preferred Skills
FAA Airframe and/or Powerplant License a Plus!
 
Job Number: JEG -1656-1
Job Location: Greenville, SC
Rate: 25-29/hr max
Duration: 9 -18 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Advanced Composite Technician II

Description:
Advanced Composite Technician II under moderate supervision, perform one or more of the following composite part manufacturing functions: lay-up, cutting, bagging, autoclave, trimming, and/or repair, in a production environment.

Principal Duties and Responsibilities:

Advanced Composite Technician II Manufacture a variety of composite aircraft parts to meet manufacturing specifications, in a team-oriented work environment. 2. Demonstrate the ability to meet the requirements of the Manufacturing Competencies at the appropriate level in the Employee Effectiveness Review. 3. Read work orders, blueprints, lofts, sketches and operation sheets to determine sequence of operations. 4. Must be skilled in the use of special tools and equipment to include precision measuring devices such as 6' scale, 1' micrometer, 6' dial caliper. 5. Check all work and ensure a defect free assembly prior to inspection. 6. Maintain and use all logs and records. Example: MIR sheets, DMTs, Crabs, PCOs, DR/DI, etc. 7. Maintain a neat and orderly work area, support the company FOD and 5S programs, and comply with all safety regulations. 8. Support Lean activities. Must be able to work any shift.

Education and Experience Requirements:
High School graduate or GED. Basic computer skills. Two (2) years related composite experience. Ability to work with composite resins and materials. Requires ability to read a interpret blueprints. Read and interpret 6' scale.
 
Job Location: Tulsa, OK
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
Location: Palmdale, CA
Rate: $70.00 - $80.00/HR
Duration: 1 year contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

Job Description:
- Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design.
- Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations.
- Will support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations.
- Will work production floor support from receipt of problem, coordination of answer to release of engineering change.
- Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight.
- Establishes structural specifications, performs stress analysis, and conducts performance tests. '


Required Skills:
- Catia V5 experience is required.
- Airframe experience is required.
- Experience designing composites is a plus.
- Experience with Siemens Fibersim is a plus.

Education:
- Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 9610
Job Location: Palmdale, CA
Rate: $70.00 - $80.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer / Catia V5 airframe design composites Fibersim - Clearance URGENT NEED CA

Description:
1090-1 Aeronautical Engineer / Catia V5

Work Location: Palmdale, CA
Status: Open

Qty: 10
12 months

Job Description:
Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design. Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations. Will support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations. Will work production floor support from receipt of problem, coordination of answer to release of engineering change. Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight. Establishes structural specifications, performs stress analysis, and conducts performance tests.

Catia V5 experience is required.
Airframe experience is required.
Experience designing composites is a plus.
Experience with Siemens Fibersim is a plus.

Work Location: Palmdale, CA
Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
Pay Rate: $68.00 Hourly

Experience
Areas of Expertise CATIA Yes 1 4 - 6 Years
Areas of Expertise Composites and Materials No 2 2 - 4 Years
 
Job Number: JE-1090-1S5
Job Location: Palmdale, CA
Rate: 68/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Interior Design Engineer

Description:
Seeking Interior Design Engineers for Wichita, KS for 12 month CONTRACT
Interior Design Engineers (Will Send Without Degree)
Candidate will be responsible for design, development and testing of aircraft interior commodities and their installations. This includes modeling/drafting of parts, assemblies, and installations using Catia V5/V6.

Interior commodities may include aircraft cabinets, seats, composite panels and air ducts, soft goods and special finishes.

Design assignments are executed under the direction of the Interior Engineering Supervisor with an emphasis on meeting and or exceeding customer requirements while maintaining the New Product Development schedule.

*****Catia V5 Experience required*****

Preferred: Experience with CATIA complex surface modeling
Preferred: Catia V6 and Enovia experience
Preferred: Experience with executive interior components and systems
Preferred: Experience with aircraft furniture and non-structural composite design
Preferred: ASME Y14.5 Geometric Dimensioning and Tolerancing (GD&T)
 
Job Number: PL Interior
Job Location: Wichita, KS
Rate: open
Per Diem: Possible
Overtime: possible
Duration: 12+ months
Start Date: 2 weeks
Input Date: 11/14/2020
Firm Name: ADVANCED TECHNOLOGY
Attention: Peggy Lundie
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Embedded Software Engineer -Simulations (73)

Description:
*This is a full time, 1 year contract position, located on site in Fort Worth*



We are looking for a contract Real Time Embedded Software Engineer to design, develop, implement, and verify real time aircraft or missile simulation software.



Day to day work may include full dome simulations, high fidelity, man in the loop simulation/mission systems, vehicle testing and integration, and verification/validation.



Required:

*9+ years’ experience developing, integrating and testing simulation software in a high-level language.

*Embedded RTOS development experience

*Experience in Rapid Prototyping, man in the loop simulations, and system verification/validation

*Active Secret Clearance, with an investigation in last 5 years.

*Engineering Degree



Pluses:

*Experience in Programming in C++ and/or Matlab and Fortran

*Good mathematics including curve fitting and regression, linear algebra, algorithms.

*Experience with DOFs and missile applications.

*Familiar with Kalman Filters
 
Job Number: 73
Job Location: Fort Worth, TX
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Manager

Description:
Currently looking for an experience Flight Test Team Manager to fill a role with a company in Moses Lake, WA. Interested candidates should have flight test management or engineering management experience.

Responsibilities of the Flight Test Team Manager:
Assign work, goals to the FTV team members.
Ensure test readiness, deliverables are on track.
Ensuring no injuries or accidents.
Ensure short and long term program schedules are accurate (updated by flight operation group and Maintenance).
Update and present short term schedule (90 days) to Functional Leads weekly.
Manage the entire FTV schedule through certification.
Provide daily and weekly FTV status.
Ensure support for short term schedule activities via Functional Leads.
Resolve issues with Functional Leads.
Setting aircraft configuration, schedule, testing and maintenance goals.
Implementing process improvements directly related to their FTV.




Requirements
Strong flight test experience.
Engineering management experience.
Aircraft configuration experience.
 
Job Location: Moses Lake, WA
Per Diem: Possible
Overtime: Yes
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Adnan Salaka
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

Aircraft Stress Engineers

Description:
Nastran, Patran a plus
 
Job Location: GA/WI
Input Date: 11/23/2020
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: sclark@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Structural Test Engineer / Stress Analyst

Description:
The candidate will support, perform and manage analysis, research and development of structural engineering specification for ground test and qualification to include structures.

The candidate must have component design, analysis and test experience of dynamic and airframe components. They must also understand the design process, test facilities, test conduct, review / correlation of data and reporting.
 
Job Number: 1910099483
Job Location: Stratford, CT
Per Diem: split
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Structures Design Lead

Description:
Aircraft Structures Design Lead who will be responsible for leading all structural design activities related to aircraft. Will report directly to the Structures Manager.

Duties will include, but are not limited to:
• Support building and lead our Aircraft Structural Design team.
• Strong knowledge and understanding of latest structural design, as well as manufacturing trends in the Aerospace industry.
• Analyze the applicability of new and emerging technologies and advanced techniques.
• Serve as the primary design focal between program, Tier 1 supplier and regulatory authorities.
• Provide technical leadership in design and development of the preliminary structures layout that meets weight, cost, manufacture-ability and certification requirements.
• Develop schedule, cost and supplier management milestones.
• Support new business development, trade studies and proposal activities.
• Support the structures team in development of the PSP, PSCP, issue papers, and other certification documents.
• Support technical review of supplier capabilities to facilitate source selection.

Requirements:
• Must be a US or Canadian citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772.
• Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure / confidentiality agreement with current or any former employer that would prevent you from fully performing the duties of the position.
• Must have a Bachelor’s Degree in Aerospace or Mechanical Engineering, or similarly related area. Master’s Degree strongly preferred.
• 12+ years of experience in performing design of large aerospace structures.
• 3+ years of leadership experience on an aircraft development program.
• Knowledge of the conceptual and preliminary design phases of aircraft development is strongly preferred.
• Thorough understanding of the structural design requirements for Part 25 certification.
• Must have demonstrated leadership capabilities.
• Demonstrated success in dealing and influencing internal and external stakeholders.
• Strategic thinker with very strong decision making and communication skills.
• Highly self-motivated with a strong bias for action, and excellent problem-solving skills across multi-disciplinary skill sets.

The Structures Company is an AA/EOE.
 
Job Number: 281
Job Location: Reno, NV
Rate: OPEN - DOE
Per Diem: Yes
Overtime: Possible
Duration: CONTRACT TO HIRE
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Systems Design Engineer

Description:
Description
Knowledge of air vehicle systems, systems integration, engineering design, the drawing release process and subsystems/component qualification
Develops and refines system level requirements for vehicle systems based on customer and implied requirements
Ability to evaluate flight test and component qualification data for verification and validation purposes and to identify further testing or development/re-design work
Reviews, updates, and compiles engineering definition of aircraft system components and assemblies based on records from the current prototype aircraft program
Supports review of manufacturing plans and procedures to ensure compliance with design requirements
Supports the creation of system test plans which will be used to verify the design intent meets requirements
Confers with management, engineering, and other staff regarding manufacturing capabilities, production schedules, and other considerations to facilitate production processes


Qualifications
B.S. degree in Mechanical, Aerospace, or similar discipline is required
8+ years of relevant industry experience; 10+ years is preferred
Experience with CATIA V5 strongly preferred, or SOLIDWORKS or equivalent
Experience in aircraft systems design, (mechanical, pneumatic, electrical) assembly and test processes
Experienced design (broad based aircraft experience) with knowledge of design manufacturing tolerances for production of components using GD&T
Experience with Product Lifecycle Management tools (PLM software), Requirements management tools and configuration management
Excellent verbal and written communication, excellent computer skills including Microsoft Word, Excel, and PowerPoint
Strong team player and ability to work independently with excellent organizational and problem-solving skills
Knowledge and experience with AS9100 a plus
Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, DO-160, military (MIL-STD-810) or NASA are highly desired
Experience with manufacturing based ERP systems a plus


The Structures Company is an AA/EOE.
 
Job Number: 266
Job Location: CA
Rate: $65-$70/Hr. **DOE**
Per Diem: Yes
Overtime: Yes
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airframe Stress Lead

Description:
Airframe Stress Lead who will be responsible for all aspects of structural integrity and implementing long-term roadmap on stress methods development. Will report directly to the Structures Manager.

Duties will include, but are not limited to:
• Support building and lead team developing stress analysis methods and tools for aircraft design and certification.
• Develop road map for structures team - in partnership with Tier 1 suppliers and Partners - in the areas of analysis methods, tools and failure criterion for the entire aircraft.
• Support IPT leads in development of the PSP, PSCP, issue papers, and other certification documents.
• Provide input to maintenance program, inspection intervals and inspection methodologies.
• Support new business development, trade studies and proposal activities.
• Support design reviews with IPT teams and partners/suppliers.


Requirements:
• Must be a US or Canadian citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772.
• Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure / confidentiality agreement with current or any former employer that would prevent you from fully performing the duties of the position.
• Must have a Bachelor’s Degree in Aerospace or Mechanical Engineering, or similarly related area. Master’s Degree strongly preferred.
• 12+ years of experience in performing stress analysis, developing methods and performing validation testing for Part 25 aircraft components.
• 3+ years of experience in leading stress and/or structural integrity teams.
• Knowledge of the conceptual and preliminary design phases of aircraft development is strongly preferred.
• Thorough understanding of latest structural static, durability and damage tolerance requirements for Part 25 certification.
• Must have demonstrated leadership capabilities.
• Demonstrated success in dealing and influencing internal and external stakeholders.
• Strategic thinker with very strong decision making and communication skills.
• Highly self-motivated with a strong bias for action, and excellent problem-solving skills across multi-disciplinary skill sets.

The Structures Company is an AA/EOE.
 
Job Number: 282
Job Location: Reno, NV
Rate: OPEN - DOE
Per Diem: Yes
Overtime: Possible
Duration: CONTRACT TO HIRE
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler FL

Description:
164400
Job Title: Assembler
Job Category: Manufacturing

Work Site Address: Pinellas Park, FL 33782
Max Pay Rate: 18-23HR PAY
Start Date: ASAP
End Date: 3-6 Months CTH
Position Type: Contract


Job Summary:
Performs a variety of operations to manufacture, assemble and/or refurbish aircraft parts and structures such as F-16 canopies, F-35 canopies, and C-130 sub-assembly components. Assemblies can require controlled tooling as well as build to print. Tasks include aligning parts on jigs using both templates and fixtures. Performs part-fitting operations such as minor filing, sawing, burring, crimping, trimming, framing, drilling, reaming, riveting, countersinking, and cold working. Measures parts with a variety of methods to verify dimensions. May modify incomplete and complete assemblies to incorporate changes and perform repairs. Works from blueprint diagrams, drawings, specifications, and shop orders. Monitors and verifies quality and develops corrective action. Performs other duties as assigned. No relocation assistance provided.

Qualifications and Education Requirements
• 1 - 2 years of sheet metal assembly/aircraft sheet metal structure experience is required.
• Previous experience as an Assembler and/or Aircraft Structures Mechanic is highly preferred.
• Previous aircraft structure on the F-16, C-130, and F-35 is highly preferred.
• Interpersonal skills and ability to interface with all levels, to work in teams or independently and communicate effectively with co-workers or supervisory staff.

• High School Diploma or equivalent.

• Mathematical ability to perform and/or understand the calculations used in assigned areas and ability to read and interpret blueprints, specifications and technical data.

• Competently uses computers and other systems to access, maintain and manipulate data.


Candidate who are submitted for this position must be prepared to interview in person.
 
Job Number: LM-006
Job Location: Pinellas Park, FL
Rate: 18-23/hr DOE
Per Diem: no
Duration: 6 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Avionics & Electrical Design Engineers

Description:
SolidWorks aircraft electrical and avionics upgrades

Immediate needs - email a resume and call our national recruiters
 
Job Location: Nationwide
Input Date: 11/23/2020
Firm Name: ADDITIONAL CONTRACT SERVICES
Address: 85 RANGEWAY RD BLDG 1 STE 2
City, State: NORTH BILLERICA, MA 01862
800 Phone: 800/661-8272
Email: acs@acsnatl.com
Website: www.acsnatl.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Avionics System

Description:
-LOCATION PACIFIC NORTH WEST-
Design, develop and integrate products, tools and or systems
• Perform testing and analysis to validate designs
• Prepare specifications, and assist with the development of processes
• Perform research, and prepare documentation, reports, procedures and tests
• Collect and correlate data, recognizing discrepancies in results
• Perform project execution from conception to completion
• Support portions of projects being performed by co-workers
• Create and update electrical drawings
• Address parts obsolescence and upgrades
• Bachelor of Science degree in electrical engineering from an accredited university (or equivalent experience)
• Catia/CAD proficiency required
• Aircraft design and avionics systems
• General understanding of how systems interact in a small aircraft
• Demonstrated ability to learn new technical areas and skills to support multiple projects
• Ability to consistently demonstrate respect and support of our company vision, mission and values
 
Job Number: 999898
Job Location: PACIFIC NORTH WEST, PACIFIC NORTH WEST
Rate: open
Per Diem: possible
Overtime: possible
Duration: Long Term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
Location: Fort Worth, TX
Duration: 6 month contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)


****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****


Job Description:
- Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
- Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.
- This position is for an engineer working in the Fort Worth IFG Aircraft Computers Team.
- Job responsibilities will include supporting development of Avionics Mission Computers on aircraft.
- Must be able to work in a fast paced environment and be able to work independently with limited oversight from team lead and manager.
- Must able to travel both domestic and internationally.


Activities include:
- Electronic hardware testing and troubleshooting
- Support Software Development efforts for target hardware
- Review and improve Hardware Specifications
- Work with Suppliers & Engineering during product development lifecycle
- Support of system integration activities
- Development/review of detailed engineering documents for software and hardware release
- Financial analysis of planned team activities
- Development of estimates to complete, development of customer estimates
- Generation of slide presentations in support of customer briefings
- Support development of Supplier Statement of Work & Proposals
- Work closely with Supply Chain Management


Education:
- Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 10333
Job Location: Fort Worth, TX
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer - Clearance TX

Description:
163995
1334-1 Avionics Engineer
Work Location: Fort Worth, TX
Status: Open

Qty: 1
Desired Start Date: 2/4/2019
End Date: 9/13/2019

Job Description:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

This position is for an engineer working in the Fort Worth IFG Aircraft Computers Team. Job responsibilities will include supporting development of Avionics Mission Computers on aircraft.
Activities include:
• Electronic hardware testing and troubleshooting
• Support Software Development efforts for target hardware
• Review and improve Hardware Specifications
• Work with Suppliers & Engineering during product development lifecycle
• Support of system integration activities
• Development/review of detailed engineering documents for software and hardware release
• Financial analysis of planned team activities
• Development of estimates to complete, development of customer estimates
• Generation of a slide presentations in support of customer briefings
• Support development of Supplier Statement of Work & Proposals
• Work closely with Supply Chain Management
Must be able to work in a fast paced environment and be able to work independently with limited oversight from team lead and manager. Must able to travel both domestic and internationally.

Work Location: Fort Worth, TX
Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
Pay Rate: $62.00 Hourly
 
Job Number: JE-1334-1S
Job Location: Fort Worth, TX
Rate: 62/hr max
Per Diem: no
Duration: 7 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Specialist (S-70 and Blackhawk)

Description:
The candidate must have at least 20 years of experience specifically supporting and/or maintaining Avionics and Electrical equipment on the Sikorsky S-70 and Black Hawk helicopters.
Advanced troubleshooting ability is required.
Familiarity with MS Dynamics and at least 5 years’ experience with Sikorsky Systems such as Matrix One, ERC, SAMS, EPATS, RFA, Worldview, and Technical Publications required.
No exceptions will be made due to critical nature of this support.
Assets working this project must be experienced in direct support of these fielded aircraft.
 
Job Number: 1910097227
Job Location: Trumbull, CT
Per Diem: split
Overtime: possible
Duration: 2 years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Subsystem Lead Engineer

Description:
seeking an Avionics Subsystem Engineer with strong experience enabling him/her to be responsible for all activities related to the design, development, integration, testing and certification of the primary avionics, secondary avionics, pitot statics, navigation, synthetic vision, enhanced vision, communications, antennae, radar, data acquisition, safety systems, health monitoring & reporting and integrated modular avionics. The successful candidate will manage the various avionics systems design and system’s suppliers, as well as all design and certification activity required. The Avionics Subsystem Lead Engineer will work out of our Reno, NV, headquarters and report to the Director of Cockpit IPT.

Duties include, but are not limited to:
• Develop avionics systems design, architecture and product plan, including qualification and certification plans
• Provide subject matter expert level technical leadership, mentoring and guidance on both practical and theoretical aspects of avionics systems
• Define requirements for the avionics systems to ensure compliance with regulations and customer requirements
• Provide validation and verification of avionics systems requirements
• Perform avionics systems tests and certification, and provide system and certification documentation
• Interface directly with avionics systems suppliers
• Manage the avionics scheduling, budget and resources
• Report subsystem status to ensure milestones are met in support of the overall program schedule

Requirements:
• Must be either a US citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772 and ITAR 120.12
• Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure / confidentiality agreement with current or any former employer that would prevent you from fully performing the duties of the position
• Minimum of a Bachelor’s Degree in Aerospace, Electrical Engineering or other relevant Engineering position
• Master’s degree in a technical and/or management specialty preferred
• 10+ years of deep, hands-on experience in Avionics systems development, design and testing in Military, Commercial and/or business jet aircraft
• 3+ years of demonstrated experience leading technical resources and teams, both internally and externally, as well as both on-site and off-site
• In-depth and current knowledge of Part 25 regulatory requirements
• Experience and expertise in the development of commercial and/or high-end business jets strongly desired
• Recent experience in developing avionics systems from concept through certification strongly desired
 
Job Number: 42-005
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Systems Integration Engineer

Description:
Avionics Systems Integration Engineer to join our Avionics team. The scope of the avionics engineering team includes: flight avionics hardware; signal conditioning; data acquisition; actuator control; RF communication; wire harnesses; vehicle guidance, navigation, control; fault tolerance; ground-support electronics hardware and software; and integrated vehicle health monitoring. The ideal candidate will have at least 2 years of experience working with avionics and electrical systems in the aerospace or related fields. A college graduate with related project experience and a passion for aerospace will be considered. We are looking for a generalist who will contribute to several roles in a fast paced environment.

Your Mission
• Design, Integration, and testing of avionics and aircraft electrical systems
• Develop vehicle, system, and component requirements for design, procurement, and test
• Evaluate and select COTS avionics subsystems.
• Work with hardware engineers and subcontractors to define requirements and interfaces for custom avionics hardware
• Create vehicle level schematics
• Plan, execute, and report on vehicle ground and flight testing
• Troubleshoot vehicle systems using schematics, multi-meters, oscilloscopes, bus analyzers, etc.

What you bring
• Experience with digital communication protocols such as RS232, RS422, RS485, Ethernet, MIL-STD-1553, CAN
• Hands-on electrical and/or avionics experience with aerospace or related systems
• Strong understanding of electrical engineering fundamentals
• Printed circuit board design experience is a plus
• Experience with analog and digital circuit design is a plus
• Experience with PCB design, FPGA, microcontrollers, and real-time systems is a plus
• 2 or more years of relevant integration and testing experience in aerospace or similar field
• New college graduates with relevant course and project work will be considered
• Experience with embedded system hardware and software
• Strong troubleshooting, organizational, and written communication skills

The Structures Company is an AA/EOE.
 
Job Number: 277
Job Location: CA
Rate: OPEN - **DOE**
Per Diem: Yes
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Technician 3 FL

Description:
164305
1738 Avionics Technician 3 (Job Number: 19003512)

Number of Openings: 3

Location(s): United States-Florida-Saint Augustine


Shift: Multiple

Target Start Date: Mar 23, 2019

Target End Date: Dec 20, 2019

Pay rate: $30.00
Location: Saint Augustine

Duration of assignment: Up to 1 year

Clearance: None

M66802 Avionics Technician 3

Position Summary / Responsibilities
Installs and troubleshoots avionics systems wiring in aircraft in accordance with technical specifications, engineering instructions. Fabricates, installs and tests installation, routing, clamping and wiring harnesses. Reads wiring diagrams and blueprints.

Leveling Factors:

Knowledge
Considerable knowledge of the job. Substantial acquaintance with and understanding of general aspects of the job with a broad understanding of the detailed aspects of the job.

Supervision Given and Received
Direct supervision and instructions given for routine work and detailed instructions given for new activities or special assignments. General supervision and instructions given for routine work and detailed instructions given for new activities or special assignments.

Typical Duties and Tasks
Duties & tasks are varied but standardized. Performs some more advanced functions. Resolves routine questions and problems, and refers more complex questions to higher levels.


Basic Qualifications: High school / GED Six years of avionics technician type of experience
Preferred Qualifications: Prior military aircraft avionics background and flight line operations experience preferred
 
Job Number: MB-1738
Job Location: St. Augustine, FL
Rate: 30/hr
Per Diem: no
Duration: 6 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Wire Harness Design & Manufacturing Engineer

Description:
Seeking an experienced and talented Avionics Wire Harness Design & Manufacturing Engineer to join our Avionics team. The scope of the avionics engineering team includes: flight avionics hardware; wire harnesses; LRU design, & instrumentation. The ideal candidate will have at least 4 years of experience working with electrical harness design, electrical harness manufacturing, & vehicle integration.

Qualifications/Requirements:
• Produce wire harness assembly (formboard) drawings
• Produce wire harness manufacturing instructions
• Produce wire harness termination drawings
• Strong understanding of wire harness manufacturing process and formboard drawings
• Strong understanding of electrical schematics & termination drawings
• Experience working with electrical designers during schematic creation
• Experience integrating wire harnesses in vehicle
• Extensive knowledge of aircraft-type wiring and components such as connectors, backshells, conduits, relays, switches, terminal junction system components, etc.
• Catia V5 Electrical Workbench is a plus
• Experience with Mentor Graphics is a plus
• Experience with composites is a plus
• Must have a B.S. Engineering degree from an accredited university

The Structures Company is an AA/EOE.
 
Job Number: 262
Job Location: CA
Rate: **DOE**
Per Diem: Yes
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics/Electrical Design Engineer

Description:
Seeking an Avionics/Electrical Design Engineer.The ideal candidate will have at least 4 years of experience working with avionics and electrical systems design. The scope of the avionics/electrical design engineering position includes: Avionics and electrical system integration and design; wire harness design; electrical load analysis and sizing; electrical component selection.

Knowledge/Experience
• Avionics systems
• EWIS & SAE AS50881
• Schematic Drawings
• Electrical Load Analysis

Responsibilities
• Aircraft electrical system design and component selection
• System integration design for avionics equipment in aircraft/spacecraft including preparation of schematics and wiring harness drawings
• Responsible for the technical performance of the avionics system
• Develop solutions to address avionics obsolescence

Educational Requirements:
Must have a B.Sc. Electrical Engineering degree from an accredited university

Professional Requirements:
• 4 or more years of relevant avionics engineering experience on development aircraft and/or spacecraft
• Strong troubleshooting, organizational, and written communication skills
• Applicants must be U.S. persons as defined by the ITAR (22 CFR §120.15)


The Structures Company is an AA/EOE.
 
Job Number: 271
Job Location: CA
Rate: $70+/Hr. **DOE**
Per Diem: Yes
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Catia V5 Instructor

Description:
Location: Tulsa, OK
Rate: $60.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
Ideal Candidate will primarily teach, assist and mentor employees with CATIA v5 and SmarTeam. Candidate will support Engineers and be expected to answer questions intelligently in a class setting. This candidate will primarily be on location in Tulsa and be expected to travel back and forth to Savannah and sub tier supplier sites to support the company in Oklahoma.
- CATIA v5 experienced with 5000+ hours.
- All Level 1 tools CATIA v5 (Part Design, Assembly, Drafting).
- Level 2 tools CATIA v5 Generative Surfacing, Free Style Shaping, Generative Sheetmetal, Generative Stress Analysis.
- Other tools: CATIA v5 Composites, Electrical EHI, Capitol Harness, Tubing experience a plus.
- Quantitative experience with Geometric Dimensioning and Tolerances a plus.
- Experience working within PDM systems such as Enovia, SmarTeam or NX/Teamcenter.
- Formal Classroom instruction experience required for CATIA and PDM.

Education and Experience Requirements:
- Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
- See Other Requirements in Job Description.
- 5 years in specific technical discipline or 10 years broad eng experience in several technical disciplines with Bachelors.
- Experience credit considered for related adv degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principal Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 10486
Job Location: Tulsa, OK
Rate: $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Design Checker

Description:
Unique Skills:
Must have engineering experience in aircraft interiors design creation and/or design quality control using CATIA V5. Software experience preferred in SmarTeam, AutoCAD, and Excel (including macros). Aircraft experience preferred in Parts 25 and 135 certification; cabinet, monument, and plumbing design; designing/checking to customer design and/or spec package; as well as continuous improvement processes.

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) ys in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Principle Duties and Responsibilities:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area
• Actively works to improve daily processes and ensures all work meets customer requirements
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
• Perform other duties as assigned.
• Advanced degree in engineering related field preferred
• The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 24-327
Job Location: Savannah, GA
Rate: $46 - $50
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Design Engineer

Description:
Position Purpose:
• Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Unique Skills:
• Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
• Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
• Knowledgeable with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
• Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam. Design Engineer will be required to liaison with the shop on engineering issues.
• Design assignments Item Installation Analysis, Similarity Analysis and Mount Configuration along with any other required items.
• Design engineer will employ design standards consistent with company standards and accepted design methods are executed under the direction of the Mechanical Engineering Group Head to meet the manufacturing schedule.
• Additional responsibilities are out lined in the job description and as assigned by the Mechanical Engineering Group Head.
• Preferred skills: Mechanical Design in Aircraft Cabin Interiors, CATIA, Smarteam, AutoCAD, Microsoft Project, Excel and Power Point.

Principle Duties and Responsibilities:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Other Requirements:
• Advanced degree in engineering, or related curriculum preferred
• The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 24-336
Job Location: Savannah, GA
Rate: $58
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Design Quality Engineer

Description:
Location: Savannah, GA
Rate: $46.20/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
- Must have engineering experience in aircraft interiors design creation and/or design quality control using CATIA V5.
- Software experience preferred in SmarTeam, AutoCAD, and Excel (including macros).
- Aircraft experience preferred in Parts 25 and 135 certification; cabinet, monument, and plumbing design; designing/checking to customer design and/or spec package; as well as continuous improvement processes.

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) years in specific technical discipline or ten (10) years broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principle Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 10516
Job Location: Savannah, GA
Rate: $46.20/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Liaison Engineer

Description:
Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Unique Skills:
• The primary function of Aircraft Completions Liaison Engineering department is to support operations aircraft by coordinating all engineering efforts required to facilitate the installation of the aircraft interior.
• Actively develop engineering product improvements.
• The Liaison engineer shall support aircraft customization requests including design, fabrication, testing, and final delivery.
• Additional responsibilities include developing alternative design approaches, including establishing design verification & validation models specification of applicable test, conductance of test to show compliance with applicable regulations.
• Successful applicant will be self-motivated, and able to develop an approach from initial procedure review, data processing, task optimization, and specifically communication of technical information to a wide range of audiences, meeting customer needs.
• Candidates should have a willingness to work off-shift and weekend hours on occasion when program milestones require.
• Applicants must be willing to constantly review existing processes and methods for continuous improvement.
• Ideal candidates for the Completions Liaison Engineer will have mechanical engineering and previous liaison engineering experience with cabin interiors and systems.
• Ensure aircraft schedule and budgets are met to support schedule for each aircraft's Supplemental Type Certification (STC) for on-time customer delivery.
• Commodity support to include but not limited to: -Seats -Galley -Lavs -Liners -Water System -Mechanical Systems

Education and Experience Requirements:
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Principal Duties and Responsibilities:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area
• Actively works to improve daily processes and ensures all work meets customer requirements
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
• Performs other duties as assigned
 
Job Number: 24-314
Job Location: Savannah, GA
Rate: $54.66
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Structural Design Engineer Openings

Description:
Design and configuration of composite primary aircraft structure.
Experience during preliminary/conceptual design phase required.
Support of subsystems integration and packaging into primary structure.
Strong knowledge and understanding of latest structural design, as well as manufacturing trends in the Aerospace industry.
Analyze the applicability of new and emerging technologies and advanced techniques.
Serve as a design focal between the program and Tier 1 suppliers.
Provide technical support in design and development of the preliminary structures layout that meets weight, cost, manufacture-ability and certification requirements.
Support new business development, trade studies and proposal activities.
Support technical review of supplier capabilities and progress.

Requirements:
Must be a US or Canadian citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772.
Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure / confidentiality agreement with current or any former employer that would prevent you from fully performing the duties of the position.
Must have a bachelor’s degree in Aerospace or Mechanical Engineering, or similarly related area.
8+ years of experience in performing design of large aerospace structures.
Strong composite structural design background.
Proficiency with CATIA V5 and Teamcenter PLM is preferred.
Knowledge of the conceptual and preliminary design phases of aircraft development is strongly preferred.
Thorough understanding of the structural design requirements for Part 25 certification is preferred.
Highly self-motivated with a strong bias for action, and excellent problem-solving skills across multi-disciplinary skill sets.

The Structures Company, LLC is an AA/EOE.
 
Job Location: Reno, NV
Rate: Open
Per Diem: Yes
Overtime: Possible
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Technician III

Description:
Currently seeking an Advanced Composite Technician. The ideal candidate will possess at least three (3) years of related composite experience.

Under minimal supervision, perform one or more of the following composite part manufacturing functions: complex lay-up, cutting, bagging, autoclave, trimming, and/or complex repairs, in a production environment. Provide specialized technical assistance and interact with team members to resolve manufacturing issues.

Principal Duties and Responsibilities:
Essential Functions:
1. Manufacture a wide variety of composite aircraft parts to meet manufacturing specifications, in a team oriented work environment.
2. Demonstrate the ability to meet the requirements of the Manufacturing Competencies at the appropriate level in the Employee Effectiveness Review.
3. Proficient at reading work orders, blueprints, GAC specifications, lofts, sketches and operation sheets to determine sequence of operations.
4. Must be skilled in the use of special tools and equipment to include precision measuring devices such as 6' scale, 1' micrometer, 6' dial caliper.
5. Check all work and ensure a defect free assembly prior to inspection.
6. Maintain and use all logs and records. Example: MIR sheets, DMTs, Crabs, PCOs, DR/DI, etc. 7. Maintain a neat and orderly work area, and comply with all safety regulations.
8. Support Lean activities.
9. Must be able to meet the physical requirements of the position.
10. Must be able to work any shift.

Education and Experience Requirements:
High School graduate or GED. Basic computer skills. Three (3) years of related composite experience. Ability to work with composite resins and materials. Requires ability to read and interpret blueprints. Must be able to use mathematical formulas to solve dimensional problems using fractions and decimals.

The Structures Company is an AA/EOE.
 
Job Number: 283
Job Location: OK
Rate: DOE
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract - Fatigue and Damage Tolerance Engineer

Description:
• Fatigue and Damage tolerance experience preferred on primary and secondary airframe metallic structure • Strong background in classical stress analysis. • Experience with Catia V5 to support stress analysis and drawing release. • Experience with reviewing 2D drawings. • Ability to work independently under limited supervision. • Experience with aircraft modifications and repairs (STC, MRB, or Service) preferred. • Experience with Patran/Nastran is a plus. • Strong preference for engineers that enjoy working in a collaborative environment. • Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.
 
Job Number: 19-143023
Job Location: Southeast
Rate: Up to $80.00 per hour
Per Diem: Yes
Overtime: Possible
Duration: Possible Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Data Integrity Checker

Description:
Location: Savannah, GA
Rate: $53.00/HR
Duration: Long Term Contract

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
- Check 2D and 3D engineering data and 3D models for conformance to company requirements as directed.
- Check parts for fit, form and function to the extent that information is available.
- Must have experience in Product Lifecycle Management (PLM) processes and tools, including checking CATIA V5, SmarTeam, as well as other CAD datasets, in accordance to company requirements as directed.

Checkers are responsible for determining the acceptability of data in the following areas:
- Accuracy and completeness of engineering product definition data, including CAD and PDM data.
- Proper application and compliance with all Engineering and customer drawing requirements.
- Use and understanding of GD & T a must.
- Dimensioning and tolerancing including familiarity with ASME Y14.5.
- Application of best drafting and design practices and procedures.
- Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
- Advise Design personnel regarding company drawing and design practices and procedures.
- Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
- Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
- Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
- Knowledge of company parts list & PdocM, a plus.

Essential Duties and Responsibilities
- Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems.
- Ensures designs meet customer criteria, quality standards and FAA requirements.
- Adheres to budget and project schedules.
- Provides design guidance and feedback to other engineering personnel.
- Other duties as assigned.
- Knowledge of industry design and documentation standards.
- Experience with mechanical assemblies and manufacturing technique design.
- Ability to work independently and cross-functionally.
- Experience in communicating with employees/teams in productive and efficient manner.
- Strong communication and problem-solving skills.

Education and Experience Requirements:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principal Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 10373
Job Location: Savannah, GA
Rate: $53.00/HR
Per Diem: Split Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Checker

Description:
Check 2D and 3D engineering data and 3D models for conformance to requirements as directed. Check parts for fit, form and function to the extent that information is available. Must have experience in Product Lifecycle Management (PLM) processes and tools, including checking CATIA v5, SmarTeam, as well as other CAD datasets, in accordance to Gulfstream requirements as directed.

Checkers are responsible for determining the acceptability of data in the following areas:
• Accuracy and completeness of engineering product definition data, including CAD and PDM data.
• Proper application and compliance with all Engineering and customer drawing requirements.
• Use and understanding of GD & T a must.
• Dimensioning and tolerancing including familiarity with ASME Y14.5.
• Application of best drafting and design practices and procedures.
• Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
• Advise Design personnel regarding GAC drawing and design practices and procedures.
• Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
• Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
• Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
 
Job Number: 24-319
Job Location: Savannah, GA
Rate: $53/hr
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Drafter / NX / BS required CA

Description:
165260
Request number: 5912
Job title: Design Drafter
Number of openings: 1
Position location: Torrance - CA
Employment type: Contract
OT exempt: No
Shift: 1st Education Requirement: BS/BA
Driving on company time?: No
Maximum Hourly Pay Rate: 50
6 months +

Function:
Mechanical Design Engineer
This position is responsible for development of complex electrohydraulic, electromechanical, mechanical, hydro-mechanical and electro-pneumatic components and systems that will become the new products. The incumbent, a fully trained professional, plans and conducts efforts requiring judgment in the independent evaluation, selection, and substantial adaptation and modification of standard engineering techniques, procedures, and criteria. Typically, the Design Engineer devises new approaches for the problems encountered.

Essential job functions:
• Perform conceptual design, analysis, assembly/detail drawing creation in NX, and test planning for complex control hardware used on military aircraft
• Contribute to the development of new product requirements through consulting with customers and sales personnel
• Validate conceptual problem solutions through trade studies and by applying sound engineering principles
• Perform engineering calculations related to sizing, performance, tolerance and assembly
• Be a key contributor to the preparation of technical proposal, cost estimates, and program schedules
• Guide the evolution of conceptual design, technical project planning, detail design, and development testing throughout the program lifecycle
• Support programs with some travel (5-10%) and the participation in presentations to customers
• Represent Moog in a manner consistent with its leading-edge technical reputation
• Create reliable designs through a comprehensive experimental development test program
• Document designs, analyses, and test results with accurate and concise reports

Required skills:
• 6+ years of design and development engineering experience
• Proficient in current versions of NX/UG computer-aided design software
• Self-starter with strong analytical skills and a desire for constant improvement
• Good sense of three-dimensional spatial orientation and knowledge of mechanical hardware design
• Proficient in assembly/detail drawings, GD&T, and dimensional tolerance analysis
• Team-oriented, with the desire to participate in and contribute to a high functioning team


Education:
• Bachelor’s degree in Mechanical or Aerospace Engineering
 
Job Number: MB-5912
Job Location: Torrance, CA
Rate: 50/hr max
Per Diem: no
Duration: 6 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineers – Aircraft Structural Repairs – Permanent - Canada.

Description:
Design Engineers – Aircraft Structural Repairs – Permanent - Canada.

Candidates sought from the US and Canada ,or those with right to live and work in Canada.

Successful candidates will:

·Actively support our client’s design team to ensure customer expectations are met.
·Design generic repairs for aircraft metallic and composite structures.
·Design specific repairs for damages exceeding Aircraft Structural Repair Publication (ASRP) limitations.
·Support operators with technical support on repairability of their aircraft fleet.
·Perform investigation on in-service structural issues affecting reliability. dispatchability and repairability.
·Participate in the design and support of structural modifications.
·Represent Customer Support in internal and external committees.
·Participate in the continuous improvement initiatives of the Customer Support organization. 

Preferred Experience:

·You hold a Bachelors degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of five (5) years in the aerospace industry.
·You have detailed knowledge of CATIA V5 (preferably R19) and Enovia.
·You are comfortable in interrogating aircraft structure repairs.
·You have knowledge of MS Office software (Word, Excel, PowerPoint, etc).
·You have strong, written and spoken, communication skills in English and French.
·You are available for occasional travel on short notice.

Our Client offers good packages to successful candidates, who join them.

Please quote ref JO0000000225 on application.
 
Job Number: JO0000000225
Job Location: Canada
Rate: Negotiable
Start Date: 03/04/2019
Input Date: 11/14/2020
Firm Name: STRONGFIELD TECHNOLOGIES USA INC
Attention: Graham Bird
Address: 5000 BIRCH ST STE 3000
City, State: NEWPORT BEACH, CA 92660
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Designer 4 / NX 8.5 FL

Description:
164134
1729 Designer 4 (Job Number: 19003773, 19003777, 19003782)

Number of Openings: 3

Location(s): United States-Florida-Melbourne


Shift: 1st Shift

Target Start Date: Apr 1, 2019

Target End Date: Oct 4, 2019

Pay Rate: $45/hr

Work Schedule: 9/80

Duration of Assignment: Approx 6 months

Seeking experienced Aircraft Structural Designers.

Candidates should have design experience with a focus on metallic structure, wing structure design, machined part

design, sheet metal and knowledge of GD&T. Familiarity with military and industry standards pertaining to material,

process and hardware.

NX 8.5 or later required with PMI knowledge a must.

Candidate should be familiar with drawing/PDP release process utilizing Teamcenter.

(Siemens) Teamcenter Enterprise / Teamcenter Unified familiarity a plus.


Basic Qualifications:

High School Diploma/ GED plus 8 years minimum aircraft metallic structural design experience.

CAD Experience using Siemens NX 8.5 or later.


Preferred Qualifications:

Prior experience with Northrop Grumman products. (E-2, JSTARS etc.)

(Siemens) Teamcenter Enterprise / Teamcenter Unified or similar PLM software.

Design of aircraft wing structure.

Familiarity with Design Review Process.

Microsoft Office Suite.

Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplishing them simultaneously
 
Job Number: MB-1729
Job Location: Melbourne, FL
Rate: 45/hr max
Per Diem: no
Duration: 6 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Doors Engineer

Description:
Candidate must be proficient in Catia V4 and Catia V5 with SmarTeam experience. Must have experience with Door Mechanism Installations, or Aircraft Mechanical Systems Design experience. Previous Aircraft STC modification is desired. Candidate shall not be a Foreign National and must be legally qualified to work on an ITAR project.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
 
Job Number: 24-333
Job Location: Savannah, GA
Rate: $70/hr
Per Diem: YES
Overtime: YES
Duration: 1 YR+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ECS & Pneumatic Subsystems Engineer

Description:
Seeking an ECS & Pneumatic Subsystem Lead Engineer with strong experience enabling him/her to be responsible for all activities related to the design, development, integration, testing and certification of the Environmental Control System (ECS), Cabin Pressurization, Oxygen System, Anti-Ice System and Bleed Air Management for a supersonic business jet. The successful candidate will manage the ECS & Pneumatic systems design and system suppliers, as well as all design and certification activity required.

Duties include, but are not limited to:
• Develop ECS & Pneumatic systems design, architecture and product plans, including qualification and certification plans
• Provide subject matter expert level technical leadership, mentoring and guidance on both practical and theoretical aspects of ECS & Pneumatic systems
• Define requirements for the ECS & Pneumatic systems to ensure compliance with regulations and customer requirements
• Provide validation and verification of ECS & Pneumatic systems requirements
• Perform ECS & Pneumatic systems tests and certification, and provide system and certification documentation
• Manage the ECS & Pneumatic subsystem scheduling, budget, resources and suppliers
• Will be responsible for hiring, developing and leading talent to augment and seamlessly integrate with our world-class team and liaise effectively with our technical support partners.
• The selected candidate will help to define the product development strategy and lead a team of engineers and analysts in that effort.
• She/he will prioritize the allocation of the ECS & Pneumatic resources to meet the milestones of the program schedule, from concept through certification.

Minimum Requirements:
• Must be either a US citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772 and ITAR 120.12
• Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure/confidentiality agreement with current or former employer that would prevent you from performing the duties of the position.
• Minimum of a Bachelor’s Degree in Aerospace, Mechanical Engineering or other relevant Engineering position
• Master’s degree in a technical and/or management specialty preferred
• 10+ years of deep, hands-on experience in ECS systems development, design and testing in Military, Commercial and/or business jet aircraft
• 3+ years of demonstrated experience leading technical resources and teams, both internally and externally, as well as both on-site and off-site
• In-depth and current knowledge of Part 25 regulatory requirements
• Experience and expertise in the development of commercial and/or high-end business jets strongly desired
• Recent experience in developing ECS systems from concept through certification strongly desired
• Must be able to demonstrate a clear understanding, knowledge and ability to define requirements, generate architecture and achieve compliance
 
Job Number: 42-001
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: Possible
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer Military Wire Harness (158)

Description:
*This is a full time, 8 month contract, located in Palmdale, CA*



We are hiring for an Electrical Design Engineer specialized in designing wire harnesses and routings for military, especially aircraft. The candidate will be crating wire assembly and harness diagrams, configuring proper routings, working around issues that arise including integration issues, ECOs and last minute changes to specifications. The role will also require that design be self checked by contractor as no Checkers will be assigned to contract. Environment will require heavy interface with production line technicians, engineers, etc. and working with Termination Aids, routing documents and master sketches.



Required:
*9 years’ experience in electrical military aircraft design 3D software.

*Experience with ANSI/ASME Y14.100 or similar design/drafting standards
*Experience reading and creating electrical drawing schematics for wire harness assemblies
*Per diem split is available for those travelling for this position
*Current Active Secret Clearance (and recently investigated within the last 5 years)
*Ability to work 2nd and weekend shifts if needed (in addition to 1st shift)



Plus:

*Catia V5 knowledge
 
Job Number: 158
Job Location: Palmdale, CA
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design and Analysis Engineer 3

Description:
Design and Analysis Engineer 3

Location: Oklahoma City, OK
Duration: 6+ months

Job Description:
Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

Required:
Must have experience in Aircraft Electrical Power design and development (engine gear box, generator, constant speed drive, power control units, synchronize bus, etc…)

Task assignments:
- Research and review requirements (IDGs/Engine) and investigate required changes to the engine gearbox
- Work with a supplier to select new IDGs that fit the new engine capabilities
- Identify all Power Control equipment (Synchronize Bus, GCU, GCB, BTB, ELCU, etc... ) associated with the new IDG capacity/rating
- Assess impacts to wires, and subsystem power feeders
- Evaluate new equipment (IDG, control system, etc.) to meet FAA certification and MIL-STD-704 power quality requirements
- Develop Power design reports and system design budget

Education / Experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Skill Code: 622-Electrical Systems Design
 
Job Location: Oklahoma City, OK
Rate: Open
Per Diem: Split
Overtime: Yes
Duration: 6 months
Start Date: Asap
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design and Analysis Engineer 4 at Huntington Beach, CA

Description:
Design and Analysis Engineer 4

Location: Huntington Beach, CA
Duration: 6+ months

Description:
Leads analysis of customer and system requirements and development of architectural approaches and detailed specifications for Automatic Test Equipment (ATE). Leads development of high-level and detailed designs consistent with requirements and specifications. Leads reviews of testing and analysis activity to assure compliance to requirements. Identifies, tracks and statuses technical performance measures to measure progress and ensure compliance with requirements. Leads activities in support of Supplier Management with make/buy recommendations and other technical services. Coordinates engineering support throughout the lifecycle of the product. Plans research projects to develop concepts for future product designs to meet projected requirements. Works under minimal direction.

Required Skills:
Knowledge of ATE design to meet unit under test (UUT) electrical, interface, and communication protocol requirements. Experience with ATE Engineering, knowledge of test instruments device driver wrappers and self-test software development.

Preferred Additional Skills:
Experience in software development using C, C++, C# and/or ATLAS. Experience in software development using LabWindows/CVI. Knowledge of the following aircraft communication protocols: 1553, ARINC 429, RS-232, RS-422, and Ethernet.

Education / Experience:
Bachelor's and 9 or more years' experience, master’s with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctor of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Skill Code:
664-Electronic Sys Design & Analy
 
Job Location: Huntington Beach, CA
Per Diem: Split
Overtime: Yes
Duration: 6 months
Start Date: Asap
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer III

Description:
Our client is looking for an Electrical Engineer 3 to work in Tulsa, Oklahoma! Apply today with your most recent resume and if you meet the qualifications a recruiter will be in contact with you!

The ideal candidate for this position will perform the following tasks:
* Design modifications for special mission aircraft. Such modifications typically include the design of electrical power distribution systems, developing electrical loads analysis, wiring diagrams and harness fab drawings.
* Utilize experience with cockpit avionics upgrades, navigation and communications systems and integration to meet FAA or Military flight safety standards.
* Analyze the impact to the host platform that the design changes cause and use this analysis during the design phase to ensure that the overall impact to airworthiness is minimized.
* Effectively communicate as part of a multi-disciplinary team working together to ensure that the aircraft systems contribute to the overall success of the program.
* Knowledge of the airworthiness process is a must and the ability to iterate design approaches with the cognizant airworthiness authorities is critical.

Mandatory Qualifications and Experience:
* 5-8 years BS in Aerospace Engineering, Mechanical Engineering or a related field or 3-6 years MS Degree in a related field or have 10 years relevant experience.
* Must be comfortable working with standard MS Office tools as well as have demonstrated experience on a Solid Modeling CAD system and Product Lifecycle Management system.
* Must be US Citizens and either have or be able to obtain and maintain a Secret level clearance.
* Must have good communication skills and be able to work any shift, weekends and overtime, as required.
* Travel, up to 15%, or as required.

Desired Qualifications and Experience:
* A working knowledge of FEA and experience with NX/TeamCenter is preferred

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 129788
Job Location: Tulsa, OK
Duration: 6 months
Start Date: 03/04/2019
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Power Generation and Distribution Engineer

Description:
• Electrical Power Generation and Distribution Engineer will be responsible for developing the subsystems requirements, architectures, roadmaps, and overall development of the subsystem from concept through certification.
• The candidate must be a subject matter expert in the relevant subsystem and have a thorough technical understanding of development of the subsystem.
• The candidate will be knowledgeable of FAR 25 certification requirements for the subsystem and subsystem components.
• Electrical Power Generation and Distribution Engineer will be responsible for the design of the relevant subsystems of the AS2 supersonic business jet to meet market and certification requirements.
• The successful candidate will have a commanding and fundamental understanding of how to design, analyze, and certify the relevant subsystem and have expert level knowledge of system integration into the aircraft.
• The candidate should be regarded as the technical subject matter expert for the relevant subsystem.

Basic Qualifications:
• BS degree or higher in mechanical/aerospace engineering.
• Minimum of seven years senior level technical experience in Electrical Power Generation and Distribution design and certification required.
• Experience with design and certification of FAR 23 or FAR 25 subsystems required.
• Strong technical, interpersonal, communication, administrative, and presentation skills. Demonstrated leadership in solving technical challenges.
• Significant experience on aircraft design teams, from concept through certification, in a collaborative multi-discipline team environment.
 
Job Number: 42-007
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrophysics Engr/Scien 3

Description:
Electrophysics Engr/Scien 3

Location: Oklahoma City, OK
Duration: 6 months

Description:
OKC Electromagnetic Effects Group is seeking experienced electromagnetic effects engineer. The candidate will mentor and coach lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for Commercial Airplanes (737, 767, 787 and 777) diverse projects. Main area of focus will be to review supplier and partner qualification data to ensure compliance to client and FAA EME requirements and to provide engineering and technical decisions for client Military Aircraft, Military Derivative Aircraft and Rotorcraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, E-6, AC-130U, B-1B, B-2, B-52, V-22, and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft electromagnetics effect on the various platforms.

Assignments may deal with:
- Reviewing supplier and partner qualification data
- Nuclear Hardening analysis and test
- EMI/C analysis and test
- EMSEC/TEMPEST analysis and test
- HIRF/Lightning analysis and test
- RF Co-Site analysis
- Antenna Coupling analysis
- Electrical Power Quality and Load analysis
- Test Automation for aircraft modifications.

Other job responsibilities may include:
- Develops and validates requirements for various communication, sensor, electronic warfare and other electromagnetic systems and components
- Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures
- Develops architectures to integrate systems and components into higher level systems and platforms
- Performs trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around established requirements
- Defines and conducts tests to validate performance of designs to requirements
- Manages appropriate aspects of supplier and partner performance to ensure compliance to requirements
- Provides support to products throughout their lifecycle by developing root-cause analysis of anomalies and other engineering support as requested
- Supports project management by providing work statement, budget, schedule and other required inputs and by reporting project status
- Writes appropriate sections of proposals to support development of new business
- Works under general mentorship.

Skill Code: 62Q-Electromagnetic Compatibility

Education / Experience:
Degree and typical experience in engineering classification: Bachelor's and 5 or more years' experience, Master's degree with 3 or more years' experience or PhD degree with experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.


Please share updated resume at ravi@iconma.com if interested.
 
Job Number: 19-03720
Job Location: Oklahoma City,, OK
Per Diem: Available
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/234-6123
800 Phone: 866/914-9724
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Level 4

Description:
Our client is looking for a level 4 Engineer to work in Savannah, GA! Apply today with your most recent resume and if you meet the qualifications a recruiter will be in contact with you!

The ideal candidate for this position will perform the following tasks:
* Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
* Is consulted extensively by associates and others as a recognized authority within the field
* Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
* Approach to problem solving balances technical product, cost and schedule
* Works without appreciable direction; work is reviewed from a long-range perspective for desired results
* Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
* Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
* Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
* Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
* Knowledgeable with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
* Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
* Design Engineer will be required to liaison with the shop on engineering issues.
* Design assignments Item Installation Analysis, Similarity Analysis and Mount Configuration along with any other required items.
* Design engineer will employ design standards consistent with company standards and accepted design methods are executed under the direction of the Mechanical Engineering Group Head to meet the manufacturing schedule.
* Additional responsibilities are out lined in the job description and as assigned by the Mechanical Engineering Group Head.

Mandatory Qualifications and Experience:
* Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
* Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors.
* Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Desired Qualifications and Experience:
* Mechanical Design in Aircraft Cabin Interiors, CATIA, Smarteam, AutoCAD, Microsoft Project, Excel and Power Point.

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 129972
Job Location: Savannah, GA
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Structural Analysis 4 / 2nd shift / Fighter Aircraft experience preferred / No Clearance Required CA

Description:
164135
1715 Engineer Structural 4 (Job Number: 19000785)

Number of Openings: 1

Location(s): United States-California-Palmdale


Shift: 2nd Shift

Target Start Date: Feb 11, 2019

Target End Date: Feb 7, 2020

Pay Rate: $70 to $73/hr

Work Schedule: 2nd shift - 4/10

Duration of Assignment: Up to 1 year



General:

Analyzes, researches and develops structural engineering specifications involving metals, non-metallic or composite structural materials for product design, or operation of product to include structures, mechanical, hydraulic, electrical and electronics, power plant, armament, heating and ventilating, equipment and maintenance designs. Analyzes damage tolerance, durability, design allowables and structural modeling. Specific structural engineering specialties may include dynamics and loads, stability and stress fatigue and thermal analysis. Tools utilized may include CATIA, IDEAS, ProEngineer and a variety of software applications.



Specific:

Successful candidate will be a member of the F-35 Center Fuselage IPT, supporting the assembly of the Center Fuselage at Palmdale Aircraft Integration Center. Candidate should be experienced in structural analysis methods, including large scale NASTRAN modelling and analysis of metallic and advanced composite structures. Desired skills include familiarity with detailed structural analysis procedures, FEM analysis, PATRAN, layout sizing, structural integrity evaluations, durability and damage tolerance (DaDT) of aircraft structures, material allowables development, acoustic/dynamic evaluations, and weight control. Responsible for liaison support as well as analysis of parts and installation of these parts in the JSF Center Fuselage. Experience should include the development and first-hand assembly line support of aircraft structural parts and assemblies utilizing metallic/composite material (launch vehicle experience considered)


Basic Qualifications:

9 Years with Bachelors in Science; 7 Years with Masters; 4 Years with PhD.


Preferred Qualifications:

Composites, DaDT(Metallics), and MRB support.

Fighter Aircraft experience preferred.
 
Job Number: MB-1715
Job Location: Palmdale, CA
Rate: 73/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

FEMAP FEA Analyst

Description:
Aircraft

Job location: Montreal, Quebec Canada
 
Job Location: Canada
Input Date: 11/23/2020
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: sclark@advancedtechno.com
Website: www.advancedtechno.com

FEMAP FEA Analyst

Description:
Aircraft
 
Job Location: North Dakota
Input Date: 11/23/2020
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: sclark@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FPGA Design/Verification Engineer - Clearance TX

Description:
163983
1333-1 FPGA Design/Verification Engineer

Work Location: Fort Worth, TX
Status: Open

Qty: 2
Desired Start Date: 1/28/2019
End Date: 8/1/2019

Job Description:
Researches, designs, develops, and tests a variety of electronic equipment and systems, including radar and radiation detection equipment; radio, television and other communications equipment and systems; circuitry components; analog and digital computers; and control and test equipment.

This position is for an engineer working in the Fort Worth IFG Hardware Design Team. Job responsibilities will include supporting development of Hardware, Software & Firmware for aircraft.

Responsibilities include:
• Electronic circuit design including Digital and Analog
• Electronic circuit board design, lay out, and routing
• FPGA development, integration, and test
• Electronic hardware testing and troubleshooting
• Support Software Development efforts for target hardware
• Author and Review Hardware Specifications
• Development and review of detailed engineering documents for firmware and hardware release
• Lead and Develop early career team members

Work Location: Fort Worth, TX
Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: JE-1333-1S
Job Location: Fort Worth, TX
Rate: open
Per Diem: no
Duration: 8 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fatigue and Damage Tolerance Engineer

Description:
Fatigue and Damage Tolerance Engineer has experience preferred on primary and secondary airframe metallic structure • Strong background in classical stress analysis. • Experience with Catia V5 to support stress analysis and drawing release. • Experience with reviewing 2D drawings. • Ability to work independently under limited supervision. • Experience with aircraft modifications and repairs (STC, MRB, or Service) preferred. • Experience with Patran/Nastran is a plus. • Strong preference for engineers that enjoy working in a collaborative environment. • Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.





Fatigue and Damage Tolerance Engineer contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area 

Education and Experience Requirements:

Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters, 4 yrs. for PhD in fields applicable to this job. 
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fatigue and Damage Tolerance Engineer

Description:
Location: Savannah, GA
Rate: $75.00 - $80.00/HR
Duration: Long Term Contract

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
- Fatigue and Damage tolerance experience preferred on primary and secondary airframe metallic structure
- Strong background in classical stress analysis.
- Experience with Catia V5 to support stress analysis and drawing release.
- Experience with reviewing 2D drawings.
- Ability to work independently under limited supervision.
- Experience with aircraft modifications and repairs (STC, MRB, or Service) preferred.
- Experience with Patran/Nastran is a plus.
- Strong preference for engineers that enjoy working in a collaborative environment.
- Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) years in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principle Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering related field preferred
The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 10399
Job Location: Savannah, GA
Rate: $75.00 - $80.00/HR
Per Diem: Split Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
We are seeking Flight Test Engineers to join us in Moses Lake, WA to support an exciting new aircraft project. The ideal candidate in this position will be involved in a range of airplane flight test operations including but not limited to:

Support engineering with test plan creation.
Discuss, write and review test cards and test hazard analysis
Support and/or lead test preparation activities, test execution, post-test activities
Support and/or lead pre and post flight briefings.
Monitor live flight data, either via telemetry or onboard flight test aircraft
Process, analyze, and draw conclusions from post flight data.
Make assessments to ensure safety of flight determination.
Document flight test design problems for long term fix.
Generate and review appropriate restrictions/ limitations documentation.
Update monitoring screens for specific testing and/or restriction monitoring.


Requirements


5+ years relevant work experience related to experimental flight test operations.
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
Strong ability to analyze results
Communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related.
 
Job Location: Moses Lake, WA
Per Diem: Possible
Overtime: Yes
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flutter & Dynamic Loads Engineer

Description:
Location: Savannah, GA
Rate: $71.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

As a Contract Engineer in Flutter & Dynamic Loads, you will:
- Provide solutions for aircraft flutter and vibration problems
- Analyze aircraft structural dynamic response and develop load distributions for gust, landing and taxi conditions.
- Analyze aircraft for flutter and determine flutter margins.

What you'll bring to the team:
- Knowledge of aircraft aero elasticity principles and concepts
- Good general knowledge of FAR/EASA Part 25 requirements
- Experience in structural dynamics modeling
- Experience with MSC Nastran and Patran or a comparable application
- Experience with ground tests such as ground vibration tests or landing gear drop tests
- Experience with flutter flight testing
- Experience with dynamic analyses such as engine fan blade out or aircraft crash landing is a plus
- Experience with aero servo elasticity is a plus

What the Loads & Dynamics team does:
- Creating and delivering a world class aviation experience
- Contributing to the certification of world class business jet aircraft

Education:
- Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
- See Other Requirements in Job Description.
- 5 years in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
- Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
 
Job Number: 10461
Job Location: Savannah, GA
Rate: $71.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fuel Cell Mechanic URGENT URGENT / no clearance / 3 years’ aircraft fuel cell experience required SC

Description:
164388
Job Title: Fuel Cell Mechanic

Work Site Address: Greenville, SC 29605
Max Pay Rate: 25-29/hr DOE
Start Date: ASAP
End Date: 6 months
Position Type: Contract

3 years’ aircraft fuel cell experience required

Job Summary:
Performs removal, installation, and inspection functions of fuel cells in addition to assembly, and installation of components such as fuel lines, hardware, and fittings on various aircraft. Analyzes various aircraft sealing, structural, and assembly drawings, to detect seal level deficiencies on aircraft. Diagnoses results of leak test to detect drawing, specification, structural and assembly sealing errors. Recommends corrective action necessary to correct deficiencies. Performs disassembly and teardown operations of aircraft fuel systems and related components. Removes fuel cells and components from aircraft, following specific procedures and techniques. Prepares cavity for installation of fuel cells and components. Installs fuel cells and components, following specific procedures and techniques. Uses appropriate pressure test equipment, and make repairs as required. Works from operations shop orders, diagrams, blueprints, engineering orders, mil-specs and verbal instructions. Work with jigs, fixtures, and various tooling, as operations requires. In order to perform the essential functions of this job, the employee is regularly required to perform confined space entry into C-130 and P-3 aircraft fuel tanks, the opening of which is approximately 10” x 16”.

Qualifications and Education Requirements
Must be able to read and speak English. Comprehend documents such as safety rules, operating maintenance instructions and procedure manuals.

Mission essential functions and other duties may be assigned as required.

Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company.

• Candidate must possess 3 years aircraft fuel cell experience.
• Candidate must provide tools in accordance with minimum tool listing, shadowed and etched per company policy/procedures.
• Candidate must have the ability to become confined space certified for entry into aircraft fuel tanks with an opening of 10”x16”.
• Candidate must comply with FAA DOT medical requirements for employee performing a safety sensitive function.

Requires respirator physical, FAA DOT medical and the ability to become confined space certified. Must be able to become confined space certified for entry into P-3 and/or C-130 Fuel Cells
 
Job Number: LM-003
Job Location: Greenville, SC
Rate: 25-29/hr DOE
Per Diem: no
Duration: 6 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fuel System Designer (Entry Level)

Description:
General Summary:

The Entry-Level Engineer Fuel System Designer is responsible for the design of the fuel system installations and related system integration. This designer will join an established design team to execute design changes for the aircraft related to product improvements, cost savings, weight savings and other minor and major change projects. Although the position will reside in the fuel systems engineering team, the role will also involve working on propulsion system design activities as required by the overall team workload.

Duties and Responsibilities:
• The primary role of this position will be to create design packages that include 3-D models (in Catia) as well as 2-D drawings. This role will encompass the execution of the design from the concept phase through to drawing release
• The ideal candidate should be able to work well with the senior designers within the team but also be able to be self-sufficient and able to manage task execution to ensure on-time and on-target completion

Education, Work Experience, Certification and/or Licensure:
• Bachelors degree in an engineering related discipline
• Minimum of 3 years of previous design experience

Knowledge, Skills and Abilities:
• Experience with Catia V5
• Familiar with Microsoft Office Products
• Familiar with FAR Part 23 or Part 25
• Familiar with Industry standards

The Structures Company is an AA/EOE.
 
Job Number: 257
Job Location: NC
Rate: $35-$50/Hr. **DOE**
Per Diem: Yes
Overtime: Yes
Duration: 12+ Months
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fuel Systems Engineer

Description:
• Responsible for developing the subsystems requirements, architectures, roadmaps, and overall development of the subsystem from concept through certification.
• The candidate must be a subject matter expert in the relevant subsystem and have a thorough technical understanding of development of the subsystem.
• The candidate will be knowledgeable of FAR 25 certification requirements for the subsystem and subsystem components.
• Fuel Systems Engineer will be responsible for the design of the relevant subsystems of the AS2 supersonic business jet to meet market and certification requirements.
• The successful candidate will have a commanding and fundamental understanding of how to design, analyze, and certify the relevant subsystem and have expert level knowledge of system integration into the aircraft.
• The candidate should be regarded as the technical subject matter expert for the relevant subsystem.

Basic Qualifications:
• BS degree or higher in mechanical/aerospace engineering.
• Minimum of seven years senior level technical experience in Fuel Systems design and certification required.
• Experience with design and certification of FAR 23 or FAR 25 subsystems required.
• Strong technical, interpersonal, communication, administrative, and presentation skills. Demonstrated leadership in solving technical challenges.
• Significant experience on aircraft design teams, from concept through certification, in a collaborative multi-discipline team environment.
 
Job Number: 42-008
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Handling Qualities and Control Law Lead Engineer

Description:
Handling Qualities and Control Law Lead Engineer
Location: Fort Worth, TX (76118)
12-18 Months

Tasks/Requirements:
- Creating analytical and simulation models of the designs
- Aircraft Stability and Control Design and Analysis
- Conducting wind tunnel tests, reducing data, and incorporating results into simulation math model
- Developing aircraft Control Laws and integrating these into flight simulation programs
- Linear and non-linear analysis of flight control systems
- Analyzing the aircraft handling qualities and comparing results to aircraft requirements and specifications
- Conducting aircraft flight tests of model and full-scale designs
- Interface with other functions and management on the program

Familiarity with the following is preferred:
· Wind tunnel testing
. 6 degree of freedom simulation models
. Model-based systems engineering
· MathWorks MATLAB / Simulink with Stateflow and Embedded Coder
· ADS-33 and other Handling Qualities specifications
. Aircraft Parameter Identification
. Control Law Optimization
· Aircraft flight test
· Experience with Enovia, DOORS, and Serena Dimensions
· Flight control system development and testing in a systems integration lab
· 14 CFR Part 27 and Part 29 for commercial rotorcraft certification



____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 54731
Job Location: Fort Worth, TX
Rate: Negotiable
Per Diem: Possible
Overtime: Possible
Duration: 12+ months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Human Performance Analyst and Investigator

Description:
Currently looking for an experienced Human Performance Analyst to fill an opening with a company located in Moses Lake, WA. Interested candidates should have a Bachelor’s Degree in Safety, Human Factors, Risk Management, Aviation Maintenance, Aeronautics, or a related field, along with at least 2 years’ experience after earning a bachelor’s degree, working directly as a specialist or instructor of human factors or human performance or flight physiology.

Responsibilities of the Human Performance Analyst

Serve as the safety team’s expert on human performance, team dynamics, and flight physiology.
Advise aircrew, dispatchers, test managers, and the Flight Test Safety Officer on scientific aspects of human psychology, physiology, ergonomics, and anthropometrics.
Provide human performance insights to help the Flight Test Safety Officer prepare Test Hazard Analyses, Safety Review Boards, and related functions.
Assess proposed flight manual changes and procedures for adherence to best practices in human performance.
Work with the Flight Test Safety Officer to develop a program of non-punitive observation of flight simulations.
Perform the observations, then debrief the flight crew and trend the data collected in a fashion similar to Line Operations Safety Assessments (LOSAs), but limited to the simulator.
Carefully review event reports and newly found hazards for human elements and how they impact risk and potential mitigations.
Develop and administer psychographic surveys to determine safety cultures and climates present in different parts of the organization, trend how they change over time, and analyze possible causes responsible for the changes.
Establish, adjust, and track Safety Performance Indicators (SPIs) and Allowable Levels of Safety Performance (ALoSP) associated with human performance, as part of SMS Safety Assurance requirements.
Create original and customized courseware in CRM/TEM and human performance for the unique intercultural employees and then coordinate with other members of the safety team to facilitate and instruct using innovative methods that use the most modern education and training technology.
Provide expert insights on the psychological barriers to change as new safety initiatives are fielded.
Create a system for tracking the currency of aircrew flight physiology training, to include altitude chamber initial and recurrent training.
Perform ergonomic assessments of workplace settings, ranging from aircraft seating to office functions conducive to repetitive stress disorder.
Work shifts as the “on-call” safety representative for time-sensitive safety issues, to include occasionally being on-call after normal business hours.
Assist and/or lead incident investigations and participate in management review of all serious incidents.
Develops and implements the human performance elements of the Risk Management (RM) program and instructs strategic and real-time RM principles to employees and executive staff.
Participate in annual budget and requirements development process for the safety team.


Requirements
Bachelor’s Degree in Safety, Human Factors, Risk Management, Aviation Maintenance, Aeronautics, or a related field.
At least 2 years’ experience after earning a bachelor’s degree, working directly as a specialist or instructor of human factors or human performance or flight physiology.
Current driver's license and current civilian passport or ability to obtain passport.
Ability to pass drug screening test.
Respectful of other national and professional cultures and possessing a willingness to learn about other cultures.
Ability to use computers and associated software programs, such as MS Word, PowerPoint, and Excel.
Ability to integrate smoothly into a fast-paced technological environment while remaining calm in situations where others may be overwhelmed.
Ability to field and prioritize a multitude of near simultaneous request from different members of a team while remaining courteous, positive, and effective.
Strong analytical skills with demonstrated problem solving ability.
Excellent written and verbal communication skills for presenting safety and human factors information.
Excellent interpersonal skills and intercultural sensitivity to work effectively with all levels of an international organization.
Preferred

Master’s degree in Safety, Human Factors, Risk Management, Aviation Maintenance, Aeronautics, or a related field.
At least 2 years’ experience after earning a master’s degree, working directly as a specialist or instructor of human factors or human performance or flight physiology.
An understanding of the ICAO or FAA SMS organizing framework.
Experience conducting human factors analyses, such as task analyses and human error analyses, associated with accidents, incidents, or voluntary hazard reporting such as the Aviation Safety Action Program (ASAP).
 
Job Location: Moses Lake, WA
Per Diem: Possible
Overtime: Yes
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Design Engineer

Description:
Our client is looking for an Industrial Design Engineer to work in Wichita, Kansas! Apply today with your most recent resume and if you meet the qualifications a recruiter will be in contact with you!

The ideal candidate for this position will perform the following tasks:
* Must be creative during the early phase of the Industrial Design Process, must have the ability to generate multiple concepts and support / lead the design team during the brainstorming, concept development phase.
* Uses design research, ergonomics and 3D models to define design intent for both interior and exterior aircraft design.
* Works as part of a multi-function design team, including industrial designers, individuals from other technical disciplines, and suppliers in the development of product design.
* Collaborates with Customers, Senior Management and other Cross Functional Teams. (SLT, AD Engineering, Int. Engineering, Marketing, Sales, Development Shop).
* Mentors design team members during the design process, shares skills and be open to training new members as needed. Will fosters a team environment and a positive work culture.
* Supports department budgets and labor forecasting. Visits University Design programs and mentors design Intern students. Help build our future design teams.
* Understands the design strategy with-in Textron Aviation, helps create new design / innovation with-in the interior organization.

Mandatory Qualifications and Experience:
* Bachelor’s Degree- Industrial Design or Equivalent
* 13-18 Years- Industrial Design experience working for an OEM or Consultancy.
* Background with Software- Alias, Catia, Adobe creative suite, KeyShot, 3ds Max
* Understanding of prototyping methods and tools associated
* Knowledge of materials and manufacturing process
* Previous experience working with Cross Functional Teams
* Expert knowledge of 3D modeling, complete knowledge of manufacturing methods, material properties, human factors & engineering disciplines.
* Has strong knowledge of marketing & branding.
* Experience with: Autodesk Alias Surface 3D, Rhinoceros 3D, Adobe Photoshop, KeyShot 3D rendering software, 2D sketch ability

Desired Qualifications and Experience:
* Adobe Illustrator
* HTC Vive VR Headset
* 3D Studio Max
* Catia V6

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 129891
Job Location: Wichita, KS
Duration: 6 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Interior Design Engineer

Description:
Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Unique Skills:
• Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions Engineering.
• Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
• Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
• Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
• Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
• Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
• Design Engineer will be required to liaison with the shop on engineering issues.
• Design assignments include but are not limited to: -Item Installation Analysis and Similarity Analysis
• Configuration Analysis Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


Principle Duties and Responsibilities:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
• Perform other duties as assigned.
• Advanced degree in engineering, or related curriculum preferred
• The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 24-335
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Interior Design Engineer

Description:
Unique Skills:
-Aircraft Cabin Interiors - Mech Design -Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations. -Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis. -Knowledgeable with Part 25 aircraft requirements and some familiarity with Part 135 requirements. -Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam. Design Engineer will be required to liaison with the shop on engineering issues. -Design assignments Item Installation Analysis, Similarity Analysis and Mount Configuration along with any other required items. Design engineer will employ design standards consistent with company standards and accepted design methods are executed under the direction of the Mechanical Engineering Group Head to meet the manufacturing schedule. -Additional responsibilities are out lined in the job description and as assigned by the Mechanical Engineering Manager. -Preferred skills: Mechanical Design in Aircraft Cabin Interiors, CATIA, Smarteam, AutoCAD, Microsoft Project, Excel and Power Point.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred

The Structures Company is an AA/EOE.
 
Job Number: 285
Job Location: GA
Rate: DOE
Per Diem: Yes
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Interior Design Engineer

Description:
Interior Design Engineer for Aircraft Cabin Interiors in Completions Engineering. Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations. -Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis. -Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements. -Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam. -Design Engineer will be required to liaison with the shop on engineering issues. Design assignments include but are not limited to: -Item Installation Analysis -Similarity Analysis -Configuration Analysis Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs. in specific technical discipline or fifteen (15) yrs. broad end experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Interior Design Engineer

Description:
Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions Engineering.

Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.

Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.

-Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.

-Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.

-Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.

-Design Engineer will be required to liaison with the shop on engineering issues.

Design assignments include but are not limited to:

-Item Installation Analysis

-Similarity Analysis

-Configuration Analysis

Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.
 
Job Number: 143870
Job Location: Savannah, GA
Rate: 58.00-63.00
Per Diem: yes
Overtime: yes
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: P O BOX 965280
City, State: MARIETTA, GA 30066-0005
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
- Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions Engineering.
- Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
- Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
- Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
- Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
- Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
- Design Engineer will be required to liaison with the shop on engineering issues.

Design assignments include but are not limited to:
- Item Installation Analysis
- Similarity Analysis
- Configuration Analysis Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred
The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 10564
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Landing Gear Engineer

Description:
• Landing Gear Engineer will be responsible for developing the subsystems requirements, architectures, roadmaps, and overall development of the subsystem from concept through certification.
• The candidate must be a subject matter expert in the relevant subsystem and have a thorough technical understanding of development of the subsystem.
• The candidate will be knowledgeable of FAR 25 certification requirements for the subsystem and subsystem components.
• Landing Gear Engineer will be responsible for the design of the relevant subsystems of the AS2 supersonic business jet to meet market and certification requirements.
• The successful candidate will have a commanding and fundamental understanding of how to design, analyze, and certify the relevant subsystem and have expert level knowledge of system integration into the aircraft.
• The candidate should be regarded as the technical subject matter expert for the relevant subsystem.

Basic Qualifications:
• BS degree or higher in mechanical/aerospace engineering.
• Minimum of seven years senior level technical experience in Landing Gear design and certification required.
• Experience with design and certification of FAR 23 or FAR 25 subsystems required.
• Strong technical, interpersonal, communication, administrative, and presentation skills. Demonstrated leadership in solving technical challenges.
• Significant experience on aircraft design teams, from concept through certification, in a collaborative multi-discipline team environment.
 
Job Number: 42-009
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Landing Gear System Design Engineer

Description:
General Summary:
Design Engineer responsible for the conceptual design and production engineering of Aircraft Landing Gear and Hydraulic Systems. The candidate will be responsible for conceptual layout, detailed design and aircraft production & in-service design and modification.

Duties and Responsibilities:
1. Generates Engineering Models and Drawings utilizing CATIA Version 5.
2. Performs trade studies to identify optimal engineering solution.
3. Collaborates with the Integrated Product Team to resolve cross functional issues.
4. Reviews work performed by others and ensure work is to the highest standard.
5. Implements Industry best engineering practices (design for manufacturing, design for reliability and design for maintainability).
6. Have the ability to understand and apply certification requirements.
7. Implement design solutions optimized for cost and weight.
8. Manages task execution to ensure on-time and on-target completion.
9. Utilizes drafting and Geometrical Dimensioning &Tolerancing knowledge to optimize part design for cost and functionality.
10. Searches for problem root cause and develop corrective action plans and solutions.
11. Serves as a primary interface within the Landing Gear and Hydraulic Systems group to ensure effective communication, coordination, and timely completion of project milestones.
12. Leads or participates in design / development reviews with management and internal customers. The candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience.

Education, Work Experience, Certification and/or Licensure:

1. BS in Mechanical Engineering with a minimum of 10 years directly related aviation engineering experience designing mechanical systems; experience can be used in lieu of education
2. Some Travel will be required

Knowledge, Skills and Abilities:
1. Proficient in use of CATIA Version 5.
2. Advanced knowledge of drafting rules.
3. Advanced knowledge of Geometrical Dimensioning and Tolerancing.
4. Proficient in Microsoft Office Products.
5. Use of Team Center.
6. Familiar with FAR Part 23 or Part 25.
7. Functional knowledge of SAP.

The Structures Company is an AA/EOE.
 
Job Number: 259
Job Location: NC
Per Diem: Yes
Overtime: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Liaison Engineer

Description:
Location: Savannah, GA
Rate: $54.67/HR
Duration: Long Term Contract

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
- The primary function of Aircraft Completions Liaison Engineering department is to support operations aircraft by coordinating all engineering efforts required to facilitate the installation of the aircraft interior.
- Actively develop engineering product improvements.
- The Liaison engineer shall support aircraft customization requests including design, fabrication, testing, and final delivery.
- Additional responsibilities include developing alternative design approaches, including establishing design verification & validation models specification of applicable test, conductance of test to show compliance with applicable regulations.
- Successful applicant will be self-motivated, and able to develop an approach from initial procedure review, data processing, task optimization, and specifically communication of technical information to a wide range of audiences, meeting customer needs.
- Candidates should have a willingness to work off-shift and weekend hours on occasion when program milestones require.
- Applicants must be willing to constantly review existing processes and methods for continuous improvement.
- Ideal candidates for the Completions Liaison Engineer will have mechanical engineering and previous liaison engineering experience with cabin interiors and systems.
- Ensure aircraft schedule and budgets are met to support schedule for each aircraft's Supplemental Type Certification (STC) for on-time customer delivery.
- Commodity support to include but not limited to: Seats, Galley, Lavatories, Liners, Water System, and Mechanical Systems

Education and Experience Requirements:
- Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
- See Other Requirements in Job Description.
- 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
- Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principal Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 10303
Job Location: Savannah, GA
Rate: $54.67/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Liaison Engineer - Interiors

Description:
Liaison engineer shall support aircraft customization requests including design, fabrication, testing, and final delivery. Additional responsibilities include developing alternative design approaches, including establishing design verification & validation models specification of applicable test, conductance of test to show compliance with applicable regulations. Successful applicant will be self-motivated, and able to develop an approach from initial procedure review, data processing, task optimization, and specifically communication of technical information to a wide range of audiences, meeting customer needs. Candidates should have a willingness to work off-shift and weekend hours on occasion when program milestones require. Applicants must be willing to constantly review existing processes and methods for continuous improvement. Ideal candidates for the Completions Liaison Engineer will have mechanical engineering and previous liaison engineering experience with cabin interiors and systems. Ensure aircraft schedule and budgets are met to support schedule for each aircraft's Supplemental Type Certification (STC) for on-time customer delivery. Commodity support to include but not limited to: -Seats -Galley -Lavs -Liners -Water System -Mechanical Systems
 
Job Number: 19-142471
Job Location: Southeast
Rate: $54.50
Per Diem: Yes
Overtime: Possible
Duration: Possible Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Logistics Management Analyst

Description:
Logistics Management Analyst
Location: Fort Worth, TX
Pay Rate: $39.41
Duration: 1 Year
Shift: First
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**

Execute the efficient flow of military aircraft parts, components and support equipment around the globe within a diverse team environment.
Desired knowledge, skills and expertise:
- Export Licensing, Documentation & Logistics
- EAR/ITAR Jurisdiction Determination,
- Schedule B / Harmonized Tariff System (HTS) classification.
- Federal Trade Regulations (FTR) including AES / ACE Electronic Export Information submittals.
- International Incoterms, exporter of record and importer of record requirements
- Global Trade Services (GTS) and SAP software.
- IATA and DOT Dangerous Goods Regulations
- Customs Clearance Process awareness

Flexible working hours required
SAP - 1+ years experience preferred
 
Job Number: 10490
Job Location: Fort Worth, TX
Rate: 39.41
Per Diem: Split Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Logistics Management Analyst TX

Description:
163802
1296-1 Logistics Management Analyst
Work Location: Fort Worth, TX
Status: Open

Qty: 1
Desired Start Date: 1/29/2019
End Date: 1/28/2020

Job Description:
Execute the efficient flow of military aircraft parts, components and support equipment around the globe within a diverse team environment.
Desired knowledge, skills and expertise:
- Export Licensing, Documentation & Logistics
- EAR/ITAR Jurisdiction Determination,
- Schedule B / Harmonized Tariff System (HTS) classification.
- Federal Trade Regulations (FTR) including AES / ACE Electronic Export Information submittals.
- International Incoterms, exporter of record and importer of record requirements
- Global Trade Services (GTS) and SAP software.
- IATA and DOT Dangerous Goods Regulations
- Customs Clearance Process awareness

**Flexible working hours required

Region: Fort Worth, TX
Level: Level 2: BS+4-8 YRS or MS+2-6 YRS
Pay Rate: $38.00 Hourly

Experience
Software Skills SAP No 1
 
Job Number: JE-1296-1
Job Location: Fort Worth, TX
Rate: 38/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MP&P Engineer

Description:
Job Description:
Coordinates definition of complex requirements for processes used in the manufacture of products. Establishes standards for specifications and other documents to manage the deployment of automated processes. Promotes standardization across the Company. Leads evaluation of emerging technologies for potential application to business needs. Establishes standards to qualify new materials, parts and processes to meet requirements. Leads integration of new technologies. Coordinates complex analysis to determine reasons for failures of materials, parts or processes. Coordinates broadly based corrective and preventive actions. Leads design, development and qualification of sophisticated production systems to satisfy user requirements. Works under consultative direction. Responsible for implementing automated equipment and processes for use on airplane composite wing assembly. Job responsibilities will include the daily production support of equipment and processes on 3rd shift plus weekend days as needed with a focus on automated drilling and fastening in CFRP, Al, & Ti, and supporting operations/processes.

Skills:
Aircraft structures assembly
Assembly Process
Drilling
Interpret schematics, assembly drawings, technical manuals
Robotics

Education: Bachelor's degree with 14 or more years' experience, Master's degree with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
 
Job Number: MPP2018
Job Location: Everett, WA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6 mon
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MP&P Engineer 5

Description:
MP&P Engineer 5

Location: Everett, WA
Duration: 1 year

Job Description:
Coordinates definition of complex requirements for processes used in the manufacture of products. Establishes documents to manage the deployment of processes. Leads evaluation of emerging technologies for application to business needs. Leads integration of new technologies. Coordinates complex analysis to determine reasons for failures processes. Coordinates broadly based corrective and preventive actions. Leads design, development and qualification of sophisticated computer and production systems to satisfy user requirements. Works under consultative direction.

The following skill sets are desired:
- CATIA or other 3D modeling software
- CAMS experience
- Data collection (scanning preferred)
- Data analysis (Polyworks, Spatial Analyzer, GOM)
- Software Development Skills
- Preferred LabView, C++, VB, or C#
- Basic controls knowledge
- Preferred experience with Siemens controllers, both programming and operation
- Knowledge of aircraft assembly,
- preferred prior knowledge of shimming processes.

Education / Experience:
Bachelor's degree with 14 or more years' experience, Master's degreee with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
 
Job Location: Everett, WA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 months
Start Date: Asap
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Engineer

Description:
Seeking an experienced, highly motivated Material Review Board (MRB) Engineer. The primary task of this person will be to review manufacturing non-conformances and establish appropriate dispositions for these parts and assemblies. Competency in first order design and analysis principles is a must. Ability to utilize CATIA V5 is desired. Experience with various composite material systems is desired.

Qualifications:
• Knowledge of air vehicle systems, systems integration, engineering design, the drawing release process, and subsystems/component qualification
• Working knowledge and experience integrating various mechanical systems into a composite aircraft.
• Familiarity with composite fabrication processes
• Review and provide engineering technical disposition of non-conformance notifications related to metallic and composite parts/assemblies
• Skilled in “equivalent strength” principles
• Participation in product Corrective Action Board (CAR) reviews


Requirements
• B.S. degree in Mechanical, Aerospace, or similar engineering discipline is required
• At least 5 years of relevant industry experience
• Experience with CATIA V5 strongly preferred. SOLIDWORKS or equivalent will be considered in lieu of CATIA.
• Experienced design (broad based aircraft experience) with knowledge of design manufacturing tolerances for production of components using GD&T
• Experience with Product Lifecycle Management tools (PLM software), Requirements management tools and configuration management
• Excellent verbal and written communication, excellent computer skills including Microsoft Word, Excel, PowerPoint, and Matlab
• Knowledge and experience with AS9100 a plus
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, DO-160, military (MIL-STD-810) or NASA are highly desired
• Experience with manufacturing based ERP systems a plus
• Strong team player and ability to work independently with excellent organizational and problem-solving skills
• Composite and metal design experience preferred
• Understanding of MRB requirements & procedures
• Extensive working knowledge of engineering drawings / requirements
• NDT/Visual non-conformance disposition expertise
• Experience with control & segregation requirements for non-conforming material
• Familiarization with records accuracy & completeness (including data codes)
• Ability to facilitate inadequate cause & corrective action resolutions
• Familiarization with rework vs accept disposition risk assessments
• Familiarization with final dispositions & re-submit codes
• Experience should include creation of engineering dispositions for non-conformances for pressurized and non
• pressurized metallic and non-metallic structures (fuselage, wing, empennage)
• Experience should be in a production and/or schedule-driven environment
• Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment
• Strong written/verbal communication and interpersonal skills
• Typically a 9-10 hour work day, with some scheduled weekend support required

The Structures Company is an AA/EOE.
 
Job Number: 263
Job Location: CA
Rate: Up to $65/Hr. **DOE**
Per Diem: Yes
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Engineer (9 positions left, Tulsa, OK)

Description:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Experience/Education
• Bachelor’s degree in aerospace or mechanical engineering.

Unique skills/Experience
• Minimum 7 years dedicated structures MRB Engineering experience at a recognized aerospace manufacturer.
• Experience should include creation and justification of engineering dispositions for nonconformances of composite and metallic, pressurized and non-pressurized aircraft structures.
• Composite experience should include fiberglass, carbon/epoxy, laminate/sandwich assemblies.
• Familiarity with results of composite NDI/NDT methods required.
• Experience should be in a Production and/or schedule-driven environment.
• Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
• Strong written/verbal communication and interpersonal skills.
• Must be computer literate (such as, but not limited to: Catia V5, SAP, Solumina, Smarteam, Word, Excel)
• Typically a 40 hr work week, with some week/weekend OT a possibility.

Essential Functions
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Acts as liaison with representatives outside of the assigned group/area

aircraft aerospace
 
Job Number: 24-303
Job Location: Tulsa, OK
Rate: $64-$67
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Maintenance Engineer

Description:
Currently looking for an experienced Maintenance Engineer to fill an opening with a company located in Seattle, WA. Interested candidates should have a Bachelor of Science or higher from ABET-accredited school or be a former licensed A/P mechanic who has extensive experience working in an engineering environment with maintenance or operations engineers.

Responsibilities of the Maintenance Engineer
Adapts a maintenance program generated by MSG-3 to flight test fleet, by analyzing changing aircraft configurations and ongoing operational data.
Coordinating across multiple sites and engineering departments at OEM.


Requirements
BS or higher degree from ABET-accredited school preferred, or former licensed A/P mechanic who has extensive experience working in an engineering environment with maintenance or operations engineers.
Background in maintenance or operations of Part 25 airplanes with an OEM or for a Part 91/121/135 operator.
Any direct experience of certification flight testing to Part 25 would be a plus.
Familiarity with MSG-3 analysis.
Hangar/Ramp and Flight test experience preferred.
 
Job Location: Seattle, WA
Per Diem: Possible
Overtime: Yes
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Adnan Salaka
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

Manufacturing Engineer

Description:
CATIA, aircraft systems
 
Job Location: Southeast
Input Date: 11/23/2020
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: sclark@advancedtechno.com
Website: www.advancedtechno.com

Manufacturing Engineer

Description:
Aircraft experience, CATIA V5
 
Job Location: Midwest
Input Date: 11/23/2020
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: sclark@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $52.50/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
Candidates must have experience with Catia V5. Experience with Solumina and SAP is preferred. Candidates must possess proven knowledge of aircraft systems and structural assemblies/installations.

Other Requirements:
1. Proven knowledge of Lean and/or Six Sigma principles.
2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
4. Lean Six Sigma Greenbelt Certification or higher preferred.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.
 
Job Number: 10122
Job Location: Savannah, GA
Rate: $52.50/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mass Properties

Description:
Minimum 5 years aircraft mass properties experience in product development environment. Strong weight control skills including influencing, accounting, reporting, measuring, risk and opportunity identification for structure and systems. Proficient in weight calculation from engineering drawings and catia v4/v5 models. Experienced in database maintenance. Familiarity with Gulfstream products and design processes desired. Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job. Job Description • Perform mass properties analysis for production aircraft or production aircraft modified for Special Mission applications. • Update a mass properties accounting database with detail part weight, center of gravity, and inertias. • Perform actual weight and balance measurement of detail parts, assemblies and full aircraft. • Prepare aircraft weight & balance documentation for flight and delivery (W&B Handbook, empty weight, W&B for flight, equipment list) • Track and status structural or system weight versus target weights. • Promote weight reduction opportunities to the responsible structural designers, system designers or stress engineers. • Provide and report to management on Aircraft Weight and Balance status • Coordinate activities to insure weight targets/goals are met What you'll bring to the team: • Apply your education as an Aeronautical, Aerospace, Electrical, Systems, or Mechanical engineer to provide quality mass properties analysis. • Apply people skills to provide optimum lightweight design concepts while working with design team. • Experience with CATIA and SmarTeam is preferred.
 
Job Number: 19-143213
Job Location: Southeast
Rate: $65.00 per hour
Per Diem: Split
Overtime: Possible
Duration: Possible Year
Start Date: 2 Weeks upon confirmation
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mass Properties Engineer

Description:
The Mass Properties Engineer will support the CH-53K Program. The ideal candidate will perform drawing review and analysis to support Mass Properties updates to the database. They will provide support of other miscellaneous Mass Properties tasks including Chart A Development, Aircraft Weighing, Trade Study Analysis and ECP updates.

This position requires the candidate to have an understanding and working knowledge of SAWE RP 7 and 8 as well as strong interpersonal skills and a minimum of 10 years Mass Properties experience. The candidate must be proficient in use of MS Excel and Word and have experience with CATIA V5.
 
Job Number: 1910099481
Job Location: Shelton, CT
Per Diem: split
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mass Properties Engineer

Description:
Location: Savannah, GA
Rate: $65.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
- Minimum 5 years aircraft mass properties experience in product development environment.
- Strong weight control skills including influencing, accounting, reporting, measuring, risk and opportunity identification for structure and systems.
- Proficient in weight calculation from engineering drawings and Catia v4/v5 models.
- Experienced in database maintenance.
- Familiarity with Gulfstream products and design processes desired.

Education:
- Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
- See Other Requirements in Job Description.
- 5 years in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
- Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Job Description:
- Perform mass properties analysis for production aircraft or production aircraft modified for Special Mission applications.
- Update a mass properties accounting database with detail part weight, center of gravity, and inertias.
- Perform actual weight and balance measurement of detail parts, assemblies and full aircraft.
- Prepare aircraft weight & balance documentation for flight and delivery (W&B Handbook, empty weight, W&B for flight, equipment list)
- Track and status structural or system weight versus target weights.
- Promote weight reduction opportunities to the responsible structural designers, system designers or stress engineers.
- Provide and report to management on Aircraft Weight and Balance status
- Coordinate activities to insure weight targets/goals are met

What you'll bring to the team:
- Apply your education as an Aeronautical, Aerospace, Electrical, Systems, or Mechanical engineer to provide quality mass properties analysis.
- Apply people skills to provide optimum lightweight design concepts while working with design team.
- Experience with CATIA and SmarTeam is preferred.
 
Job Number: 10462
Job Location: Savannah, GA
Rate: $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mass Properties Engineer

Description:
The successful candidate shall have experience with Weight and Balance for outfitting of an airplane. Candidate shall have knowledge of the applicable regulations governing weight and balance operations. Experience working within an ODA environment a plus. Experience working with sales a plus. Candidate must have excellent written and verbal skills.

Responsibilities
• Perform mass properties analysis for production aircraft or production aircraft modified for Special Mission applications.
• Update a mass properties accounting database with detail part weight, center of gravity, and inertias.
• Perform actual weight and balance measurement of detail parts, assemblies and full aircraft.
• Prepare aircraft weight & balance documentation for flight and delivery (W&B Handbook, empty weight, W&B for flight, equipment list)
• Track and status structural or system weight versus target weights.
• Promote weight reduction opportunities to the responsible structural designers, system designers or stress engineers.
• Provide and report to management on Aircraft Weight and Balance status
• Coordinate activities to insure weight targets/goals are met

Experience Requirement
• Minimum 5 years aircraft mass properties experience in product development environment.
• Strong weight control skills including influencing, accounting, reporting, measuring, risk and opportunity identification for structure and systems.
• Proficient in weight calculation from engineering drawings and Catia v4/v5 models.
• Experienced in database maintenance.
• Familiarity with Gulfstream products and design processes desired.
 
Job Number: 24-326
Job Location: Savannah, GA
Rate: $65
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Master Technical Training Instructor

Description:
Location: Savannah, GA
Rate: $39.00 - $43.00/HR
Duration: Long Term Contract
Shift: 4x10
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
1. Aircraft manufacturing and Repair Station knowledge and or experience required.
2. Sheet metal and structures experience required.
3. Looking for candidates with classroom and hands-on experience. Example: hands-on experience with structures, sheetmetal, riveting, etc.
4. Company Aircraft knowledge preferred.

Education and Experience Requirements:
1. Bachelor's degree preferred or equivalent combination of education and experience.
2. Five to eight years experience in aviation industry, including relative Company experience.
3. Three to five years experience in training related area.
4. See Other Requirements in Job Description.

Position Purpose:
1. Under minimum supervision, research, assist in the development, organize and deliver training curriculum.
2. Act as an internal consultant on training issues in areas of expertise.
3. Support training as assigned at all company and Flight Safety facilities.
4. Support Lead Training Instructors and mentor other training instructors as required.

Principal Duties and Responsibilities:
Essential Functions:
1. Conduct classroom and practical training as requested at all company and Flight Safety facilities. Training may include certification training for engine/APU qualifications, Aircraft Recurrent/Refresher Training, Familiarization Training, and System Line Maintenance Training on assigned aircraft or on assigned systems for employees and customers.
2. Identify, research, and verify technical accuracy of information required for training course development. Monitor all applicable information sources to determine required changes to current training programs.
3. Oversee the development of new or updated training programs. Report progress to lead instructor. Interface with engineering and other cognizant personnel while using engineering material/technical data (block diagrams, blueprints, test specifications, and reports) to determine training content. Working with other instructors, guide the projects/subjects that they are working on to make sure any training development project meets established milestones. Ensure established standards are upheld.
4. Work with lead instructor to determine training needs and help determine the best approach to provide required training to the work-force and our customers (classroom, hands-on, CBT).
5. Prepare all necessary training materials (course outlines, lesson plans, books, handouts, presentations, CBTs) needed to meet training objectives while maintaining established departmental, company, and training provider standards.
6. As assigned, maintain technical expertise on existing Company products and acquire knowledge on new product designs from available sources, i.e. Engineering, Tech Ops, Pubs, etc.
7. As assigned, obtain and maintain qualification to instruct in at least three subject areas (system, area or subject) and any associated simulator requirements.
8. Schedule Aircraft Equipment resources as required for Practical Training.
9. Prepare and coordinate technical data and training information as required for use in off-site training/seminar sessions.
10. Develop and maintain Computer Based Training.
11. Solicit, promote, and exhibit a spirit of teamwork between Company and Flight Safety.

Additional Functions:
1. Mentor Training Instructors as required and provide assistance in the development of their skills and abilities.
2. Promote and ensure a safe training environment.
3. Update training programs/records accordingly.
4. Travel as necessary to conduct training.
5. Performing other duties as required and/or assigned.

Other Requirements:
1. A&P, FCC, or Pilot License preferred.
2. Instructor development training is required.
3. If the instructor will be a member of the Company/Flight Safety Total Technical Training program, an FSI Master Technician Certification required.
4. Expert user of PowerPoint, MSWord, and Lotus Notes.
5. Ability to utilize media equipment.
6. Ability to read/interpret blueprints and wiring diagrams.
7. Ability to solve the problems between peers and subordinates.
8. Must exhibit excellent verbal, written, and teaching skills.
 
Job Number: 10592
Job Location: Savannah, GA
Rate: $39.00 - $43.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Materials & Process Engineer

Description:
We are currently seeking M&P Engineer individuals with a focus in evaluation/processing of composites and adhesive secondary bonding of composites. Also must have ground floor experience and creating methods from scratch.

Seeking a first rate aircraft materials and processes engineer with experience in composite materials, testing, out-of-autoclave processing, as well as bonded assemblies. The engineer in this role will be expected to fully understand and maintain the materials and processes used. The primary task of this role will be to design and carry-out mechanical testing to support structural analysis of both current and future vehicle builds. This will require consultation and buy-in from stakeholders in various departments so strong interpersonal skills are also necessary. The engineer in this role is expected to be knowledgeable of basic mechanical testing methods, and familiar with composite and paste adhesive properties. An additional task of this role will be to review/write manufacturing procedures and processes to ensure compliance with design specifications.

Duties:
• Develop and refine material and process requirements
• Author materials and processing specifications
• Author material/joint test plans and their associated reports
• Review test data and undertake post-testing activities including design allowable calculations, equivalency determinations, and failure mode analysis
• Review test plans, process specifications, and other documents to ensure compliance with design requirements
• Confer with stakeholders in Manufacturing, Engineering, and other departments to facilitate production of parts

Requirements:
• Bachelor’s degree from an ABET accredited institution, with a concentration in a relevant Materials Engineering / Mechanical Engineering / Structural Engineering discipline
• Conversant in composite materials and processes used in the manufacture of composite aircraft fuselage and structural components including out-of-autoclave processing and bonded assemblies
• Experience in authoring / revising materials and process specifications for composite materials
• Experience in authoring test plans and reports
• Knowledgable of materials testing and characterization methods
• Familiarity with industry-accepted statistical analysis methods of treating test data such as those found in CMH17-1
• A desire to work in a fast-paced work environment with a motivated team
• Excellent verbal and written communication skills
• Excellent organizational skills and problem-solving skills
• Strong team player
• Excellent computer skills, Microsoft Word, Excel and PowerPoint
• Experience in stress analysis methods, including the use of hand calcs and FEM is a plus


The Structures Company is an AA/EOE.
 
Job Number: 279
Job Location: Mojave, CA
Rate: **DOE**
Per Diem: Yes
Overtime: Possible
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Materials and Process Engineer

Description:
Location: Savannah, GA
Rate: $55.00/HR
Duration: Long Term Contract

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
- Experience of working in a team environment to identify substantiating rationale for selecting materials and processes that become part of engineering models.
- Successful history of generating work authorizing instructions, test plans/reports and specifications.
- Ability to communicate with stakeholders and document accurate and timely project updates.
- Understand FAA regulations and certification processes.
- Special Missions - Highly prefer: KSA in Non-Metal Sealants and Coatings, Composites and Materials Processing.

Education and Experience Requirements:
Bachelor's degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principal Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 10372
Job Location: Savannah, GA
Rate: $55.00/HR
Per Diem: Split Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Materials and Processes Engineer

Description:
• Build and Lead all parts of Materials and Processes organization for the aircraft development.
• Lead development of the material and process specifications through collaboration with OEM, suppliers and vendors to guide program in selecting appropriate materials by drawing from civil, military and/or industry standards.
• Strong knowledge of aerospace composites and metallic materials, advanced manufacturing processes, test methods and design allowable development.
• Knowledge of aircraft flammability and structural bonding requirements for Part 25 certification.
• Provide advice on the applications, properties and processing of advanced material systems to all stakeholders - including, but not limited to, stress, design, customer support, quality and procurement.
• Perform trade studies, write proposals and support new business development plans.

Requirements:
• Must be either a US citizen, a US permanent resident (a “US Person”) or a Canadian citizen.
• Minimum Bachelor’s Degree in Engineering. Master’s Degree strongly preferred.
• 15+ years of hands-on experience in advanced materials and processes qualifications, testing, manufacturing and certification of Part 25 aircraft
• 5+ years of experience leading technical resources and team.
• In-depth and current knowledge of Part 25 regulatory requirements.
• Demonstrated success in dealing and influencing internal and external stakeholders.
• Experience in engineering support of aircraft production line activities is desirable.
 
Job Number: 42-014
Job Location: Reno, NV
Rate: DOE but very competitive
Per Diem: YES
Overtime: YES
Duration: 1 year+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design - Doors and Mechanisms

Description:
Minimum 8 years Mechanical Design experience with mechanisms and articulating doors - Thorough understanding of Auxiliary Mechanisms and Doors as well as Structures design criteria including design loads and durability (fatigue and corrosion)
Solid understanding of design and manufacturing processes involved for both metallic and composite parts with a focus on design for manufacturing and assembly (DFMA)
Solid understanding of 3D Model Based Definition (3D MBD), and the application of Geometric Dimensioning and Tolerancing (GD&T) for details and assemblies as well as tolerance stack-up analysis and GD&T as it applies to the Door systems
Minimum 10,000 hours or 5 years’ experience on CATIA v5 in Auxiliary Mechanisms and Doors Design, Kinematics workbench proficiency required

Preferred candidates will also have:
Proficiency in CATIA v5 workbenches: part design (machined parts), sheet metal, Composite Part Design (CPD), FT&A, Knowledge Based Engineering (KBE) tools including use of parameters, design tables, and Visual Basic macros Proficiency in SmarTeam PLM database - Experience with FAA/ODA certification and component testing
MRB experience with Hydraulics, Landing Gear, and Doors
Hands-on experience with aircraft production support
Prior work experience with Gulfstream aircraft design - Experience with knowledge management processes

Responsibilities include:
Develop structural and mechanical systems definition of the aircraft by producing the form, fit, and function documentation from conceptual layouts to final detail design
Engage various engineering, manufacturing, and product support teams to complete designs
Participate in design reviews - Interact with suppliers and prepare technical coordination memos
Prepare engineering reports - Document, track, and manage design projects of various magnitude using online knowledge bases and tracking tools
Provide technical leadership and mentoring to junior engineers

Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
 
Job Number: 19-143609
Job Location: GA
Rate: 70.00
Per Diem: Split
Overtime: Possible
Duration: Year +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Location: Savannah, GA
Rate: $58.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
- Mechanical Design in Aircraft Cabin Interiors, CATIA, Smarteam, AutoCAD, Microsoft Project, Excel and Power Point.
- Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
- Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
- Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
- Knowledgeable with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
- Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
- Design Engineer will be required to liaison with the shop on engineering issues.
- Design assignments Item Installation Analysis, Similarity Analysis and Mount Configuration along with any other required items.
- Design engineer will employ design standards consistent with company standards and accepted design methods are executed under the direction of the Mechanical Engineering Group Head to meet the manufacturing schedule.
- Additional responsibilities are out lined in the job description and as assigned by the Mechanical Engineering Group Head.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

Principle Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
2. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 10603
Job Location: Savannah, GA
Rate: $58.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Location: Savannah, GA
Rate: $70.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Qualified candidates will have:
- Minimum 8 years Mechanical Design experience with mechanisms and articulating doors
- Thorough understanding of Auxiliary Mechanisms and Doors as well as Structures design criteria including design loads and durability (fatigue and corrosion)
- Solid understanding of design and manufacturing processes involved for both metallic and composite parts with a focus on design for manufacturing and assembly (DFMA)
- Solid understanding of 3D Model Based Definition (3D MBD), and the application of Geometric Dimensioning and Tolerancing (GD&T) for details and assemblies as well as tolerance stack-up analysis and GD&T as it applies to the Door systems
- Minimum 10,000 hours or 5 years experience on CATIA v5 in Auxiliary Mechanisms and Doors Design, Kinematics workbench proficiency required

Preferred candidates will also have:
- Proficiency in CATIA v5 workbenches: part design (machined parts), sheet metal, Composite Part Design (CPD), FT&A, Knowledge Based Engineering (KBE) tools including use of parameters, design tables, and Visual Basic macros
- Proficiency in SmarTeam PLM database
- Experience with FAA/ODA certification and component testing
- MRB experience with Hydraulics, Landing Gear, and Doors
- Hands-on experience with aircraft production support
- Prior work experience with company aircraft design
- Experience with knowledge management processes

Competencies essential for the job:
- Strong interpersonal skills and ability to work in a team environment and across disciplines
- Ability to communicate technical findings and recommendations clearly
- Humility, be a team player, help teammates
- Passion for Auxiliary Mechanisms and Doors Design work

Responsibilities include:
- Develop structural and mechanical systems definition of the aircraft by producing the form, fit, and function documentation from conceptual layouts to final detail design
- Engage various engineering, manufacturing, and product support teams to complete designs
- Participate in design reviews
- Interact with suppliers and prepare technical coordination memos
- Prepare engineering reports
- Document, track, and manage design projects of various magnitude using online knowledge bases and tracking tools
- Provide technical leadership and mentoring to junior engineers

Education:
Bachelor's degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 years in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job
 
Job Number: 10571
Job Location: Savannah, GA
Rate: $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Location: Savannah, GA
Rate: $70.00 - $80.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
1. Knowledge of Flight Test Instrumentation Mechanical Design is required.
2. Working knowledge of CATIA V5 and SmarTeam is required.

Education and Experience Requirements:
1. Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
1. Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

Principle Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
2. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 10573
Job Location: Savannah, GA
Rate: $70.00 - $80.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Location: Savannah, GA
Rate: $55.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Job Description:
- Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Final Phase Completions.
- Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
- Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.

Required Skills:
- Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
- Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
- Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
- Design Engineer will be required to liaison with the shop on engineering issues.

Design assignments include but are not limited to:
- Item Installation Analysis
- Similarity Analysis
- Configuration Analysis Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.

Education:
- Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
- See Other Requirements in Job Description.
- 5 years in specific technical discipline or 10 years broad engineering experience in several technical disciplines with Bachelors.
- Experience credit considered for related adv degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.
 
Job Number: 10428
Job Location: Savannah, GA
Rate: $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Location: Savannah, GA
Rate: $58.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
- Mechanical Design in Aircraft Cabin Interiors, CATIA, Smarteam, AutoCAD, Microsoft Project, Excel and Power Point.
- Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
- Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
- Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
- Knowledgeable with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
- Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
- Design Engineer will be required to liaison with the shop on engineering issues.
- Design assignments Item Installation Analysis, Similarity Analysis and Mount Configuration along with any other required items.
- Design engineer will employ design standards consistent with company standards and accepted design methods are executed under the direction of the Mechanical Engineering Group Head to meet the manufacturing schedule.
- Additional responsibilities are out lined in the job description and as assigned by the Mechanical Engineering Group Head.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

Principle Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
2. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 10435
Job Location: Savannah, GA
Rate: $58.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Designer / SECRET CLEARANCE/Solid-works, NX, Catia

Description:
Desired Qualifications:
**Candidate must have an ACTIVE SECRET**
•Prefer 4+ years of directly related experience
developing 3D models and detailed drawings
using either Solid-works or NX, or Catia and AutoCAD
•Familiarity with aircraft systems or Simulation equipment experience.
 
Job Number: 658574
Job Location: mid west
Rate: competitive
Per Diem: yes
Overtime: possible
Duration: 12 month plus/contract
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer - Secret Clearance

Description:
Major purpose:

Mechanical design, integration, test and production support of simulation equipment. Responsibilities include development of 3D models, detailed drawings and interfacing with manufacturing.



Education/Experience/Licenses etc.:

Must have an existing, active Secret Security Clearance.

•BS in Mechanical Engineering or equivalent experience in an engineering discipline

•Prefer 4+ years of directly related experience

•Experience developing 3D models and detailed drawings

•Ability to develop innovative solutions

•Must have strong verbal and written communication skills with the ability to communicate complex issues to technical and non-technical audiences that include peers, management, and customers



Desired Qualifications

•Experience using SolidWorks and AutoCAD

•Finite Element Analysis application experience

•Familiarity with aircraft cockpit systems

•Simulation equipment experience




Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-01330
Job Location: Broken Arrow, OK
Rate: 70.0USD/Hour
Per Diem: NO
Overtime: POSSIBLE
Duration: 2019-05-03 00:00:00.0
Start Date: 2019-02-04 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Kevin Lord
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer - Secret Clearance

Description:
Major purpose:

Mechanical design, integration, test and production support of simulation equipment. Responsibilities include development of 3D models, detailed drawings and interfacing with manufacturing.



Education/Experience/Licenses etc.:

Must have an existing, active Secret Security Clearance.

•BS in Mechanical Engineering or equivalent experience in an engineering discipline

•Prefer 4+ years of directly related experience

•Experience developing 3D models and detailed drawings

•Ability to develop innovative solutions

•Must have strong verbal and written communication skills with the ability to communicate complex issues to technical and non-technical audiences that include peers, management, and customers



Desired Qualifications

•Experience using SolidWorks and AutoCAD

•Finite Element Analysis application experience

•Familiarity with aircraft cockpit systems

•Simulation equipment experience




Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-01330
Job Location: Broken Arrow, OK
Rate: 70.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2019-05-03 00:00:00.0
Start Date: 2019-02-04 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Kevin Lord
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer SECRET CLEARED CATIA V (089)

Description:
*This is a full time, 1 year contract, located in Palmdale, CA*

We are hiring for a long term contract, CATIA V design engineer who will be designing wire harnesses for military aircraft. Candidate will be designing installations, integrations, part modifications, and assemblies, to military specifications such as ANSI and/or ASME.



Required:
*12-15 years’ experience in electronics/wire harness design using CATIA V5.
*Experience with ANSI/ASME Y14.100 or similar design/drafting standards
*Per diem split is available for those travelling for this position

*Must have an Active Secret Clearance (reinvestigated in last 5 years)

*Engineering Degree
 
Job Number: 089
Job Location: Palmdale, CA
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical System Design Engineer

Description:
• Perform preliminary and detail design of aircraft mechanical systems, including flight controls, landing gear and ECS systems.
• Create 3D/2D definition.
• CATIA V5 is a plus.
• Participate in the Engineering definition review, approval and release process
• Support the review of manufacturing plans and procedures to ensure compliance with design requirements
• Support the creation of structural test plans which will be used to verify manufacturing processes meet design intent and requirements.
• Ability/Interest interacting with the shop floor.

The Structures Company is an AA/EOE.
 
Job Number: 264
Job Location: CA
Per Diem: Yes
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Mechanical Systems Design Engineer

Description:
Aircraft Engineering & Design--

10+ years of engineering experience with supporting aviation systems; perform layouts and stack ups; have worked in all or most of the following activities:
-System Engineering
-Architecture
-Design
-Integration
-Test or requirements activities
Preferable multi-system knowledge - ECS, hydraulics, mechanics, pilot/flight controls, and propulsion; NX experience preferred

U.S. Citizen or Permanent Residency Required

Paid Holidays
United Healthcare Medical Insurance
Dental
Vision
Direct Deposit
 
Job Number: 53934
Job Location: California
Input Date: 11/23/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Bernard Barrera
Address: 2500 REDHILL AVE STE 200
City, State: SANTA ANA, CA 92705
Phone: 949/432-7512
Email: bbarrera@butler.com
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Engineer - Fuel Systems

Description:
Sr. Mechanical Systems Engineer:

Must also have experience with the following:

• Must have clean sheet design experience
• Must have a fuel systems background.
• System analysis – perform pressure drop analysis, among other analysis.
• System testing required for PDR.
• Integration of entire system into aircraft for PDR.
• Create detailed models.
• Spec out system parts.
• Coordinate/support manufacturing
• FAR Part 23 experience is a huge plus



The Structures Company is an AA/EOE.
 
Job Number: 252
Job Location: Manassas, VA
Rate: $80/Hr.
Per Diem: Yes
Duration: 9 Months - Possibly Longer
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Engineer - Landing Gear

Description:
Seeking a Mechanical Systems Engineer with landing gear background

Must have experience with:
• Must have clean sheet design experience
• System analysis – perform pressure drop analysis, among other analysis.
• System testing required for PDR.
• Integration of entire system into aircraft for PDR.
• Create detailed models.
• Spec out system parts.
• Coordinate/support manufacturing
• FAR Part 23 experience is a huge plus
• Must have a BS degree (BSAE, BSME)

The Structures Company is an AA/EOE.
 
Job Number: 281
Job Location: VA
Rate: $75-$85/Hr.
Per Diem: Yes
Duration: 3-6+ Months - Possibly Longer
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Testing Engineer

Description:
Job Description:
Support 3rd Shift testing in the Integrated Test Vehicle laboratory. Responsibilities include, but are not limited to, communicating with the test team to configure, monitor and maintain the laboratory test setup (includes complex Hydraulics, Electronics and Mechanical Systems). Opportunity exists for expanded mechanical design work. This is a hands-on role that provides the opportunity to be part of a unique test team performing work class testing on advanced aircraft systems.

Education:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.
 
Job Number: TE2018
Job Location: Seattle, WA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6 mon
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Shailendra Mishra
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Metrology Engineer II

Description:
Position Purpose:
Under minimal supervision, prepare, conduct, and evaluate for the implementation, programming and support of metrology equipment in tooling, program development and production. Assist with the improvements and problem solving for design and manufacturing issues related to tooling, material fabrication and assembly methods.

Unique Skills:
Experience with Laser Trackers, scanning and / or photogrammetry preferred. The ability to perform measurements accurately and precisely while assisting with root cause analysis based on the data. Metrolog software knowledge preferred but SA, Polyworks, Verisurf, or Geomagic knowledge more than acceptable. Experience with measuring large assemblies and tooling preferred.

Education and Experience Requirements:
Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen (18) months of Metrology Engineering, Manufacturing Engineering, Automation Engineering or related technical experience.

Principle Duties and Responsibilities:
• Interpret & consolidate aircraft engineering, tooling designs and production requirements, to develop optimized measurement plans and processes.
• Under minimal supervision, develop programing for all measurement equipment that will be used in the development, manufacture and support of Gulfstream aircraft.
• Collaborate with engineering, tooling, manufacturing engineering and operations to determine optimal manufacturing procedures.
• Assist in developing and documenting standards for the handling and utilization of metrology equipment.
• Create standardized inspection reports through the utilization of Metrologic software.
• Study and optimize equipment performance for increased capacity and equipment efficiency.
• Interact and collaborate with equipment vendors on warranty repairs, necessary improvements and upgrades.
• Set up and utilize precision measuring tools; validates measurement results for accuracy and repeatability.
• Provide and/or contribute to the documentation of new or recent processes involving metrology techniques or equipment.
• Coordinate the implementation of projects between multiple organizations.
• Support all Safety, Sustainability and Ergonomic Initiatives.
• Work to improve daily processes, and ensures all work meets customer requirements.
• Assist tool shop as needed, during periodic and conformity Inspections.
• Provide input toward the selection of metrology equipment and software.
• Perform other duties as assigned.

Other Requirements:
• Extensive knowledge of metrology equipment, software and current measurement techniques.
• Knowledge 3D CAD/CATIA modeling and an understanding of GD&T.
• Knowledge of Lean and/or Six Sigma principles.
 
Job Number: 24-324
Job Location: Savannah, GA
Rate: $55
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Metrology Engineer II

Description:
Position Purpose:
Under minimal supervision, prepare, conduct, and evaluate for the implementation, programming and support of metrology equipment in tooling, program development and production. Assist with the improvements and problem solving for design and manufacturing issues related to tooling, material fabrication and assembly methods.

Education and Experience Requirements:
Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen (18) months of Metrology Engineering, Manufacturing Engineering, Automation Engineering or related technical experience.

Unique Skills:
• Must be US citizen.
• Ability to read/understand complex blueprints, sketches, verbal instructions and tools.
• Tooling experience and/or relevant training preferred.
• Experience with using precision 3D measurement devices to locate and assemble parts or tools.
• Must be proficient in the use of laser trackers.
• Experience with Metrolog X4 or X4V5 software preferred. Experience with Catia V5 software preferred.
• This job involves extensive Laser Tracker work on the shop floor. Experience with Laser Trackers is a must.

Principle Duties and Responsibilities:
• Interpret & consolidate aircraft engineering, tooling designs and production requirements, to develop optimized measurement plans and processes.
• Under minimal supervision, develop programing for all measurement equipment that will be used in the development, manufacture and support of Gulfstream aircraft.
• Collaborate with engineering, tooling, manufacturing engineering and operations to determine optimal manufacturing procedures.
• Assist in developing and documenting standards for the handling and utilization of metrology equipment.
• Create standardized inspection reports through the utilization of Metrologic software.
• Study and optimize equipment performance for increased capacity and equipment efficiency.
• Interact and collaborate with equipment vendors on warranty repairs, necessary improvements and upgrades.
• Set up and utilize precision measuring tools; validates measurement results for accuracy and repeatability.
• Provide and/or contribute to the documentation of new or recent processes involving metrology techniques or equipment.
• Coordinate the implementation of projects between multiple organizations.
• Support all Safety, Sustainability and Ergonomic Initiatives.
• Work to improve daily processes, and ensures all work meets customer requirements.
• Assist tool shop as needed, during periodic and conformity Inspections.
• Provide input toward the selection of metrology equipment and software. Perform other duties as assigned.

Other Requirements:
• Extensive knowledge of metrology equipment, software and current measurement techniques.
• Knowledge 3D CAD/CATIA modeling and an understanding of GD&T.
• Knowledge of Lean and/or Six Sigma principles.
 
Job Number: 24-317
Job Location: Savannah, GA
Rate: $50-$55
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Metrology Engineer II

Description:
Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****

Required Skills:
- Must be US citizen.
- Ability to read/understand complex blueprints, sketches, verbal instructions and tools.
- Tooling experience and/or relevant training preferred.
- Experience with using precision 3D measurement devices to locate and assemble parts or tools.
- Must be proficient in the use of laser trackers.
- Experience with Metrolog X4 or X4V5 software preferred.
- Experience with Catia V5 software preferred.
- This job involves extensive Laser Tracker work on the shop floor.
- Experience with Laser Trackers is a must.


Education and Experience Requirements:
Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen (18) months of Metrology Engineering, Manufacturing Engineering, Automation Engineering or related technical experience.


Position Purpose:
Under minimal supervision, prepare, conduct, and evaluate for the implementation, programming and support of metrology equipment in tooling, program development and production. Assist with the improvements and problem solving for design and manufacturing issues related to tooling, material fabrication and assembly methods.


Principle Duties and Responsibilities:
Essential Functions: 1. Interpret & consolidate aircraft engineering, tooling designs and production requirements, to develop optimized measurement plans and processes. 2. Under minimal supervision, develop programming for all measurement equipment that will be used in the development, manufacture and support of company aircraft. 3. Collaborate with engineering, tooling, manufacturing engineering and operations to determine optimal manufacturing procedures. 4. Assist in developing and documenting standards for the handling and utilization of metrology equipment. 5. Create standardized inspection reports through the utilization of Metrologic software. 6. Study and optimize equipment performance for increased capacity and equipment efficiency. 7. Interact and collaborate with equipment vendors on warranty repairs, necessary improvements and upgrades. 8. Set up and utilize precision measuring tools; validates measurement results for accuracy and repeatability. 9. Provide and/or contribute to the documentation of new or recent processes involving metrology techniques or equipment. 10. Coordinate the implementation of projects between multiple organizations. 11. Support all Safety, Sustainability and Ergonomic Initiatives.


Additional Functions: 1. Work to improve daily processes, and ensures all work meets customer requirements. 2. Assist tool shop as needed, during periodic and conformity Inspections. 3. Provide input toward the selection of metrology equipment and software. Perform other duties as assigned.


Other Requirements: 1. Extensive knowledge of metrology equipment, software and current measurement techniques. 2. Knowledge 3D CAD/CATIA modeling and an understanding of GD&T. 3. Knowledge of Lean and/or Six Sigma principles.
 
Job Number: 10342
Job Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Per Diem: Split Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Metrology Specialist

Description:
Metrology Specialist with experience in setup, build, and inspection of large tools and assembly structures. This role is for a hands-on person with great versatility with regard to building and assembling large precision structures. The first task of this role will be to execute the installation and setup of new production fixtures, tooling, and equipment in a new production facility. The specialist in this position will support the production tooling and equipment design and installation in order to create an efficient, organized, and lean factory. After production operations begin, the Metrology Specialist will work closely with production personnel to maintain equipment and tooling and contribute to process improvement using lean processes and tools. Metrology Specialists will also help with the large scale aircraft assembly steps and inspection.

Key Components of position
• Hands‐on Tooling assembly
• Large structure handling: driving a forklift, scissor lift, boom lift, etc. operating a crane or hoist, installing concrete mounting points in floor, accurately locating large or heavy structure to within .005” accuracy.
• Must be able to lift 50 lbs.
• Utilizing CAD or 3D software for inspection (one or more of the following):
o PC Demus, Verisurf, Geomagic, Polyworks, Spacial Analyser, or similar
• Metrology
• Working with laser trackers or similar positioning systems

Professional requirements for position
• Hands on experience in setup of large scale precision fixtures or tooling
• Excellent Organizational Skills and problem-solving skills
• Excellent computer skills (CAD and/or 3D software packages) as well as standard Microsoft products
• Strong team player
• Experience with large aircraft assembly and inspection a plus Metal shop skills (welding, grinding, machining, etc) a plus
• Must be able to take direction well and is a strong team player.
• Extreme attention to detail and continual pursuit of perfection.
• Excellent listening and communication skills.
• Ability to maintain composure in high pressure situations
• Excellent organizational skills and problem-solving skills.
Physical Requirements
• Must be able to stand for extended periods – 8 hours min.
• Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces.
• Physically able to handle items weighing up to 40lbs (unassisted).
• Working in confined spaces
• Working on Elevated Platforms

The Structures Company is an AA/EOE.
 
Job Number: 284
Job Location: MoJave, CA
Rate: $55-$70/Hr.
Per Diem: Yes
Overtime: Possible
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mid-Level Composite Aero-Structures Design Engineer

Description:
Composite Aero-Structures Design Engineer
Location: Mojave, CA
12+ month contract

Essential Functions & Responsibilities:

Use CATIA V5 with Composite Work Bench to Design Composite aircraft structures.

Education: BS degree in Engineering: Mech-Aero-Civil-Struct.

2-10 years of experience required.

REQUIRED Minimum Composite Design Experience:

2 Year’s Experience of air- frame design (Wing or Fuselage or Empennage)
2 Years experience with CATIA V5 with CPD / CWB and/or Fibersim.
Mandatory Software Skills:

CATIA V5 + Composite Work Bench CWB / CPD or Fibersim.
MS Word, MS Excel, MS PowerPoint.
Personal and Interpersonal Skills

Clear intuitive understanding of load path & design intent of structural parts.
Understanding of aircraft internal loads & how to design efficient structure.
Strong interpersonal skills with willingness to ask questions & dig for answers
High degree of collaboration and openness with team members is expected.
Ability to work independently, be insightful, resourceful & innovative.
Willingness to do whatever work is assigned.
Great verbal & written communication skills in English.
Ability and willingness to interface with your co-workers.








Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 56343
Job Location: Mojave, CA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12+ months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NC Programmers

Description:
5 Axis, MASTERCAM, Aircraft exp.
 
Job Number: 0301
Job Location: Windsor, CT
Rate: Open
Per Diem: yes-split
Overtime: yes
Duration: 8 mos+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: HI-TEK PROFESSIONALS INC
Attention: Greg Ambrose
Address: 103 CHESLEY DR STE 207
City, State: MEDIA, PA 19063
Phone: 610/534-8701
800 Phone: 877/271-1799
Fax Phone: 610/534-8697
Website: www.hitekprofessionals.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Non-Destructive Testing (NDT) Level 3 Technician (UT, ET, PT)

Description:
The ideal candidate will be primarily developing UT, ET and PT Non-Destructive test instructions for composite components.

Other NDT techniques will also be developed depending on candidates existing experience with other methods.

Occasional travel will be required to other Facilities within Connecticut and to Pax River, MD to review aircraft configuration, to perform Non-Destructive Inspection, and to develop Inspection Techniques for aircraft.

You will work closely with a team of Design Engineers, NDT Level 3's, Level 2’s, and Engineering Technicians to design inspection standards, to coordinate for standard fabrication, and to write and approve inspection techniques for components using the standards.

The position is contingent upon being able to certify in UT, ET and PT Level 3 per NAS 410 requirements within 90 days of beginning employment.

Secondary Level 3 responsibilities include:
•Performing engineering evaluations including defect analysis, NDT methods analysis, and inspection (when inspection is required must have a minimum level II certification).
•Preparing and reviewing engineering specifications.
•Developing and evaluating new equipment and technology.
•Providing technical support to manufacturing, engineering, programs, field personnel, and suppliers.
•Auditing internal and external NDT inspection facilities.
•Participating in development of NDT training course material for Level I, II, and III.
•Testing and certifying NDT Level I, II, and III Inspectors in accordance with NAS 410 and company requirements.

Basic Qualifications
•Certification (ASNT Level 3 certification, NAS 410 Level 3 certification, or Equivalent in UT, ET and PT).
•Ability to certify to NAS 410 UT, ET and PT Level 3 requirements within 90 days of employment. (Including vision correctable to 20/25 in at least one eye.)
•Experience performing UT, ET and PT NDT on Composite materials.
•Proficiency in Microsoft Office products (Word, PowerPoint and Excel) and database utilization.
•Must be a US Citizen or legally authorized to work in US as a permanent resident.

Desired skills
•Composite UT, ET and PT experience on Aerospace Components.
•Bachelor's degree or above in Engineering or Technology discipline.
•Documented 5-10 years of Aerospace Non-destructive testing.
•Technical writing experience.
•Non-destructive test (NDT) experience with composite structures.
•The ability to collaborate and work well with fellow team members.
•Experience using CATIA or other 3D modeling software a plus.
•Familiarity with NAVAIR Nondestructive inspection manuals and processes.
•Experience in Laser Testing Methods (LM), or Thermal/Infrared Testing (IR) is a plus
 
Job Number: 1810094139
Job Location: Stratford, CT
Per Diem: split
Overtime: possible
Duration: 18 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Powerplant ECS & Cooling Systems Engineer

Description:
Location: Savannah, GA
Rate: $63.00/HR
Duration: Long Term Contract

****MUST be a U.S. Citizen or Permanent Resident****

Candidate should have experience with:
- Aircraft environmental control systems
- Specialized onboard equipment cooling systems, including: Liquid cooling systems, Air cycle systems, and Vapor cycle systems
- Cooling system performance analysis
- Heat exchanger design and analysis
- Component qualification and certification test
- System test and certification
- Part 25 and DO-160
- Supplier coordination

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 10376
Job Location: Savannah, GA
Rate: $63.00/HR
Per Diem: Split Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Powerplant, ECS & Fuel Systems Engineer

Description:
Location: Savannah, GA
Rate: $75.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if