Job Search Results

746 listings were found that matched your search words: Keywords: Aircraft ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2024/03/28 Thursday 07:42AM Pacific Time by ContractJobHunter. )

Listings 1 - 746

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2 System Design Engineers - hydraulics, Landing Gear or fuel Systems Experience Needed

Description:
Seeking System Design Engineers with 10+ years of experience with detail design of mechanical systems. (hydraulics, landing gear or fuel, etc.) utilizing Catia V5. BS Degree required.

***1 position is located in Manassas, VA and 1 position will be located in Cambridge, MA.***


Duties:
Design aircraft mechanical systems based on customer requirements
Establishes manufacturing tolerances for production of components using GD&T
Design for Manufacturing (DFMA)
Supports review of manufacturing plans and procedures to ensure compliance with design requirements


Requirements:
Bachelor’s degree in Mechanical or Aerospace Engineering from an accredited institution much preferred.
Experience with CATIA V5
Experience in detail design of aircraft mechanical systems, or aircraft composite/metallic structure.
Experience designing hydraulics, landing gear or fuel systems.
DFM experience required
Minimum of 10+ years of experience as a design engineer within the aircraft industry.
Experience with Model Based Definition and GD&T
Experience with Product Lifecycle Management tools (PLM software), Requirements management tools and configuration management
US Citizen required



The Structures Company is an AA/EOE.
 
Job Number: 278
Job Location: VA & MA
Rate: $75-$78/Hr.
Per Diem: Yes
Duration: 9 Months - Possibly longer
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2560 - AVIONICS SYSTEMS ENGINEER - cv, word doc only

Description:
Interfacing with customers (both internal and external) during definition and implementation of avionic system integration.

Execute program milestones according to established schedule and ensure critical path and key dependencies are effectively managed to achieve successful outcome.

Reviewing detailed execution plans and schedules with the project management team to ensure adequacy, completeness, and harmonization with the overall program level plan.

Generating system requirements documents for physical and logical interfaces.

Defining cockpit display formats and control operation in conjunction with the customer.

Developing and running functional test procedures for all avionics sub-systems.

Advising the customer on the physical installation of avionics equipment.

Troubleshooting and diagnosing avionics problems on the systems integration rig and flight test aircraft (may involve travel)

Documenting, tracking, and resolving avionics problems resulting from both design errors and equipment failures.

Generating certification documents for subsystems demonstrating compliance with OEM certification plans.

Supporting Change Management related activities at the program level.

Bachelor's Degree in applicable engineering or science field, and ten years of related experience, or, in the absence of a bachelor's degree, sixteen years of related experience.

Detailed systems knowledge is required in at least five of the following systems: AFCS, Air Data, Cockpit Audio, Cockpit Printers, Datalink, EFIS, EICAS, Enhanced Vision Systems, FANS, FMS, GPS, Graphical Datalink Weather, HUD, Integrated Modular Avionics (IMA), On-board Maintenance Systems, Radio Altimeters, Synthetic Vision Systems, TAWS, TCAS/Transponders, VHF Comm, VHF Nav, XM Weather.

Analysis - thinking through a logical, in-depth analysis of a problem or situation.

Cooperation - Serves as a role model to his or her coworkers by demonstrating respect and sensitivity for fellow workers and promoting open discussion of issues.

Coordinating - Provides a seamless stream of communication and support.

Customer Service Orientation - Fully comprehends the value of the organization's customers and champions strategies to ensure world-class service.

Dependability - Consistently produces exemplary results that can be used as prototypes for future projects.

Judgment - Able to quickly assess the costs, benefits, and risks of a decision while using sound logic to ultimately make well-informed decisions.
 
Job Number: 2560
Job Location: Toronto, Canada
Rate: 85.00
Per Diem: No
Overtime: 1.5
Duration: Long Term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2469 - AVIONICS/ELECTRICAL SYS. - AFTERNOON, MIDNIGHT & WEEKEND SHIFT

Description:
Provide Avionics Engineering support to the Client Final Line Assembly during afternoon, midnight and weekend shift.

Witness system functional testing and conduct technical investigations on Electrical and Avionic systems related issues, analyze and develop solutions/recommendations and reports. Disposition RFCs, RNCs, and Supplement 2s as required.

Review functional test requirements and ensure translation into mature functional tests.

Track and ensure successful implementation of systems installations and modifications.

Work with the product development team to assist with technical proposal activities, including preparation of written material and presentations. Recommend and review design changes.

Develop good working relationships with various departments within BA and with all suppliers.

Bachelor of Engineering Degree and eligibility for Professional Engineer registration.

AME license is an asset.

Experience in providing engineering support to a Final Line/ Production.

15 years' experience in aircraft electrical systems and or avionics systems (Electrical Generation, Distribution, Lighting, Navigation, Communication, Displays, EICAS, Data Concentration System, AFCS, Stall System, OMS, FDR, CVR etc).

Conversant with design, qualification and certification test requirements of Aircraft Electrical and or Avionic systems.

Have flexibility to travel.

Familiar with Part 25 certification requirements and advisory material.

Possess strong integration skills, in both system partner management and system technical integration.

Familiar with Microsoft Office software tools.

Strong communication skills, ability to work well in a multi-disciplinary team environment.

Regular work day, some flexibility required:

Afternoon Shift (3:30 to 12:00) ;

Midnight Shift = (11:00 PM to 6:30 AM);

Weekend Shift = Friday, Saturday, Sunday and Monday.
Friday (3:30 PM -12:00 (midnight)),
Saturday (6:00 AM to 6:00 PM),
Sunday (6:00 AM to 6:00 PM)
Monday (8:00 AM 8 to 4:30 PM)
 
Job Number: 2469
Job Location: Canada
Rate: 62.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2471 - PROPULSION/PNEUMATIC SYSTEMS - AFTERNOON SHIFT

Description:
Provide Propulsion/Pneumatic Engineering support to the Client Final Line Assembly during afternoon shift.

Witness system functional testing and conduct technical investigations on Propulsion and Pneumatic systems related issues, analyze and develop solutions/recommendations and reports. Disposition RFCs, RNCs, and Supplement 2s as required.

Review functional test requirements and ensure translation into mature functional tests

Track and ensure successful implementation of systems installations and modifications

Work with the product development team to assist with technical proposal activities, including preparation of written material and presentations. Recommend and review design changes

Develop good working relationships with various departments within BA and with all suppliers

Bachelor of Engineering Degree and eligibility for Professional Engineer registration. AME license is an asset

Experience in providing engineering support to a Final Line/ Production

15 years' experience in aircraft Propulsion and/or Pneumatic systems (High and Low Pressure Ducting, Environmental Control System, Avionics Cooling, Oxygen System, Power plant, Fuel systems, etc)

Conversant with design, qualification and certification test requirements of Propulsion and/or Pneumatic systems

Have flexibility to travel.

Familiar with Part 25 certification requirements and advisory material.

Possess strong integration skills, in both system partner management and system technical integration

Familiar with Microsoft Office software tools

Strong communication skills, ability to work well in a multi-disciplinary team environment.

Regular work day, some flexibility required:

Regular Shift = Afternoon Shift (3:30 to 12:00) ;
 
Job Number: 2471
Job Location: Canada
Rate: 62.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2500 - ELECTROMAGNETIC COMPATIBILITY (EMC) ENGINEER - cv, word doc only - On Hold

Description:
Responsible at the aircraft and system level for Electromagnetic Compatibility (EMI)/High Intensity Radiated Fields (HIRF)/Lightning Strike/ Electrostatic Discharge technical requirements.

Knowledge of relevant industry standards (RTCA/DO-160, SAE ARP) and high level of familiarity with airworthiness (TCCA, FAA, EASA) Regulations and Advisory Materials pertaining to EMI, HIRF, Lightning and Electrostatic Discharge.

Execute intermediate to complex engineering assignments related to EMI, HIRF, and Lightning and Electrostatic Discharge requirements.

Analyze new systems designs, assess technical impacts, propose EMC compliance approaches, review/approve technical documents, test plans, test procedures and test reports, and check compliance with certification regulations.

Define scope of work for EMC effort of technical/engineering projects, estimate the time required, plan, highlights technical risks and execute according to priorities.

Define technical requirements, test requirements and perform detailed analysis to ensure aircraft and systems compliance to EMC certification regulations.

Prepare EMI, HIRF, Lightning and Electrostatic Discharge test procedures, execute tests in laboratories and on aircraft and generate results and analysis test reports.

Support and witness EMC tests in Canada, United States and Europe as needed.

Master degree in Electrical or EMC Engineering, or alternatively a Bachelor's degree in Electrical or Physics Engineering with a minimum of eight (5) years of experience in aircraft EMC/HIRF/Lightning/Electrostatic Discharge (FAR 25.981 is an asset).

8 years of experience or more in an aerospace manufacturing company.

Have EMC bench and/or aircraft testing experience.

Have a minimum of five (5) years working experience with systems qualification/certification.

Knowledge of harness design, aircraft design principles including familiarity with aircraft regulatory requirements.

Proficient with the use of PC including Microsoft Office software tools.

Energetic person with strong written and oral communication and interpersonal skills, a high sense of commitment, and a willingness to accept responsibilities while acting independently in a high-pressure partner/supplier team environment.

Must be familiar with DO160, STD ARP, MIL STD, FAA regulations, as well as other applicable airworthiness regulations.

Must be able to analyze modifications at aircraft level and check compliance with certification regulations.

Must be able to support and witness EMC tests in Canada, United States and Europe as needed.
 
Job Number: 2500
Job Location: Montreal, Canada
Rate: 52.00
Per Diem: Paid 3 Months only
Overtime: Paid NOT at 1.5
Duration: 36+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2523 - HYDRO-MECHANICAL SYSTEMS ENGINEER - cv, word doc only - On Hold

Description:
Take part in the integration of the flight control, hydraulic and/or landing gear system for the definition, specification, design, analysis, modification, test and certification of hydro-mechanical systems

Coordinate product development activities between the supplier of the system and the affected work packages

Ensure successful design, validation, certification and delivery of the system

Ensure successful completion of each development phase deliverables (may author, review, approve)

Problem solve the technical issues in a cross functional environment

Be involved in the design and integration of the system

Review the design and documentation of all the aspects related to your system

Check for quality of the Supplier's analyses

Validate and verify system requirements as well as system performance through design reviews, analyses, rig and aircraft testing

Define, prepare and execute qualification and certification tests

Work with supplier in the investigation and resolution of test findings

Bachelor or Master's (preferred) degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of five (5) to seven (7) years

Background in design, integration, development and certification of Hydro-Mechanical Systems

Cognizant of the relevant Airworthiness Regulations and certification process

Good oral and technical writing skills in English (required)

Motivated, self-starter, organized, autonomous and able to work under limited supervision

Team player and able to work with suppliers and customers

Dynamic person with initiative, a strong sense of responsibility and good judgment

Knowledge of MS Office software (essential)

Knowledge of CATIA, Matlab, Simulink (an asset)
 
Job Number: 2523
Job Location: Toronto, Canada
Rate: 57.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2524 - PROPULSION SYSTEMS ENGINEER - cv, word doc only

Description:
Design and integration of the system.

Review of the design and documentation of all the aspects related to your system.

Checking for quality of the Supplier's analyses.

Validation and verification of system requirements.

Validation and verification of system performance through design reviews, analyses, rig and aircraft testing.

Definition, preparation and execution of qualification and certification tests.

Working with supplier in the investigation and resolution of test findings.

Preparation or review of qualification or certification reports.

Working with suppliers to establish complete system requirements and system interfaces.

Liaison with stress, loads, reliability, maintainability and safety (RM&S), simulation, customer and operations support departments.

Identify issues and obstacles, follow-up and communicate progress.

Prepare reports or presentations.

Bachelor or Master's (preferred) degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of five (5) to seven (7) years.

Background in design, integration, development and certification of Propulsion Systems.

Cognizant of the relevant Airworthiness Regulations and certification process.

Good oral and technical writing skills in English and French (required).

Motivated, self-starter, organized, autonomous and able to work under limited supervision.

Team player and able to work with suppliers and customers.

Dynamic person with initiative, a strong sense of responsibility and good judgment.

MS Office software (essential).

Good knowledge of DO-160, FAR/CAR25 Regulations.

Previous experience in providing engineering support to a Final Line/Production would be an asset.
 
Job Number: 2524
Job Location: Toronto, Canada
Rate: 57.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2525 - METHODS ENGINEER - AFTERNOON SHIFT - cv, word doc only

Description:
Support the Client Final Line Assembly activities for a timely resolution of production line issues related to system integration.

Witness system functional testing and conduct technical investigations / troubleshooting on Hydro-Mechanical Systems (ATA 27, ATA 29, ATA 32), analyze and develop solutions / recommendations.

Support production to resolve non-conformance (NCR), tooling issues and procedure clarification / correction.

Track and ensure successful implementation of systems installations and modifications

Support the line by producing return into service (RTS) documentation.

Develop good working relationships with various departments within BA and with all suppliers

Bachelor Degree in Engineering or Master Degree (Aerospace Manufacturing, Aircraft Maintenance etc.).or a diploma from a technical college.

3-8 years%u2019 experience in aircraft Electrical and Avionics systems (Communication, Electrical Power, Indication/Recording Systems, Navigation, and Information Systems)and / or in Hydro-Mechanical Systems (Fly-by-Wire systems, Wing High-Lift, Landing gear, Hydraulic Systems).

Experience in providing support / troubleshooting to Aircraft Maintenance / Final Line / Production Line / Test Bench / Simulator.

Are process oriented.

Possess strong analytical skills, you are a quick learner.

Are a team player, able to work in high-stress environment.

Have excellent interpersonal and communication skills.

Autonomous persons, capable of managing time and prioritites

Must have a good knowledge of MS Office and Requirements Management tools.

Knowledge of SAP is an asset.

Knowledge of MES is an asset.
 
Job Number: 2525
Job Location: Toronto, Canada
Rate: 51.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2527 - AVIONICS ISE ENGINEER - 2527 - cv, word doc only

Description:
Lead resolution of technical in service issues for the Client Family of aircraft.

Coordinate technical investigations with other engineering disciplines, suppliers and aircraft operators.

Prepare and issue Electrical and Avionics related product changes, modifications and repairs.

Answer technical queries from the Field Service Representatives and the airline operators.

Be involved in operators' conferences and operator technical reviews.

Analyze and approve new system concept proposals and integrate them in aircraft documentation.

Prepare functional test engineering requirements (FTER), Test definition Sheets (TDS) and avionics systems certification reports.

Coordinate with system suppliers to achieve good integration.

Communicate and coordinate with Transport Canada's design approval designees (DADs).

Investigate avionics system problems identified on aircraft in service or in production. Provide engineering dispositions. Support Continuous Airworthiness (CAW) processes.

Bachelor Degree in Aeronautical Engineering or equivalent.

Must be a team player showing initiative, have a strong sense of responsibility and possess good technical and commercial judgment.

Must have at least 10 years relevant experience with the specification, design, development, integration, test and certification of Avionics systems on aircraft.

Knowledge of certification requirements is required.

Technical experience on the Client family of aircraft is an asset.

Must have strong English (written and spoken) communication skills.

Must be capable of working under pressure, be attentive to details, have good planning skills and be fully committed to accomplishing work on time and on schedule.

Must be computer literate and familiar with commonly used software (MS Office).

Catia V5 experience is an asset.

Must have strong investigative skills.

Are self-starter, enthusiastic, well organized and customer oriented.

Previous experience with Network Security or (FMS) Flight Management System or Autoflight and generic working knowledge of Navigation and communication system is required.

Familiarity with part FAR25 / 525 certification process is an asset.

Experience with civil aircraft and airworthiness authorities is an asset.
 
Job Number: 2527
Job Location: Mirabel, Canada
Rate: 55.00
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 36+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2528 - ELECTRICAL SYSTEMS ENGINEER - cv, word doc only

Description:
Integrate electrical systems on Client family of aircraft (including power generation systems, electrical wiring interconnection systems (EWIS), lighting systems, etc.).

Ensure that all new electrical system concepts meet applicable aircraft system requirements (FAR, RTCA DO160, etc.) and to Client Aerospace requirements and practices.

Prepare requirement documents including technical quotations, system schematics, technical requirement documents (TRD) and statement of work (SOW).

Analyze and approve new system concept proposals and integrate them in aircraft documentation.

Prepare functional test engineering requirements (FTER), Test definition Sheets (TDS) and electrical systems certification reports.

Coordinate with system suppliers to achieve good integration.

Communicate and coordinate with Transport Canada's design approval designees (DADs).

Provide the required electrical expertise and support for the integration of all other aircraft systems (avionics, hydromechanical, pneumatics, propulsion, etc.).

Investigate system problems identified on aircraft in service or in production. Provide engineering dispositions and repair procedures.

Create electrical system schematics and review system

University degree in Engineering or equivalent.

Must be a team player showing initiative, have a strong sense of responsibility and possess good technical and commercial judgment

Must have at least 5 years relevant experience with the specification, design, development, integration, test and certification of Electrical systems on aircraft.

Technical experience on the Client family of aircraft is an asset.

Must have strong English (written and spoken) communication skills.

Must be capable of working under pressure, be attentive to details, have good planning skills and be fully committed to accomplishing work on time and on schedule.

Must have abilities in AutoCAD/AutoSketch.

Must be familiar with part FAR25 / 525 certification process.

Must be computer literate and familiar with commonly used software (MS Office).
 
Job Number: 2528
Job Location: Mirabel, QC, Canada
Rate: 58.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2529 - HYDRO-MECHANICAL SYSTEMS ENGINEER

Description:
Integrate hydromechanical systems on CRJ Family of aircraft (including landing gear, flight control, hydraulic systems, etc.).

Provide the required hydromechanical expertise and support for the integration with other disciplines (including design, RM&S, airworthiness, electrical, avionics,
propulsion, etc.).

Coordinate with system suppliers to achieve good integration.

Investigate system problems identified on aircraft in service or in production.

Provide engineering dispositions and repair procedures.
Support Continuous Airworthiness (CAW) processes.

Analyze and approve new system concept proposals and integrate them in aircraft documentation.

Ensure that all new hydromechanical system concepts meet applicable aircraft system requirements (FAR, RTCA DO160, etc.) and Client Aerospace requirements and practices.

Communicate and coordinate with Transport Canada's design approval designees (DADs).

Prepare requirement documents including technical quotations, system schematics, TRDs and statement of work (SOW).

Prepare and/or review system definition drawings, qualification documentations, functional test engineering requirements (FTER), Test definition Sheets (TDS), design compliance reports, reliability reports and other system certification
reports.

Provide technical support to the production line and to in-service aircraft as required.
University degree in Engineering or equivalent experience, in the mechanical field. A specialization in aeronautical applications is desirable.

Technical experience on the Client family of aircraft is an asset.

Must have strong English (written and spoken) communication skills.

Manage various projects under strict budget and schedule requirements.

Are able to manage conflicts and solve problems.

Are self-starter, enthusiastic, well organized and customer oriented.
 
Job Number: 2529
Job Location: Mirabel, QC, Canada
Rate: 54.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2535 - PROGRAM ANALYST - CHNG. MGMNT - cv, word doc only

Description:
Understand aircraft component assembly and manufacturing strategies as well as the impact on program strategies.

Identify the key risks of the project, including mitigation / reduction strategies.

Harmonize the implementation of engineering changes or assembly strategy by working closely with engineering, material logistics, quality and production departments.

Ensure a flawless implementation of change management on the production line.

Develop and implement targets and monitoring mechanisms to track performance and progress, prepare status reports and modify timelines and schedules as required.

Influencing (leadership) the day-to-day multidisciplinary team towards the achievement of program objectives.

Climb to the appropriate level of management when required.

Bachelor Degree in mechanical engineering, avionics, electrical, industrial, or electromechanical, in aeronautical manufacturing or in a related discipline.

Have experience in the aeronautical industry.

Have more than five (5) years of relevant experience.

Have initiative, are result-oriented and have the desire to make decisions.

Have strong leadership skills, as well as strong analytical, planning and problem solving skills.

Have excellent communication skills (written and spoken) and are able to influence at different levels of the organization.

Are able to work under pressure with tight deadlines while delivering quality results.

Are using the MS Office suite effectively (Word, Excel, PowerPoint, and Project).

Are fluent in English and French, both written and spoken.
 
Job Number: 2535
Job Location: Montreal, Canada
Rate: 51.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2536 - DESIGN ENGINEER - cv, word doc only

Description:
Participate in design reviews and exchange / communicate your thoughts.

Provide estimate of design related activities.

Support suppliers, production and final line installations.

Bachelor Degree in Mechanical or Aerospace engineering or equivalent with a minimum of five (5) years of relevant experience.

Possesses or cumulate experience in:
Design of aircraft structures with CATIA V5/FiberSim.
Ability to understand complex engineering issues .
General computer skills.

Must be a self-motivated person, a team player able to work under pressure and under a minimum of supervision.

Have an excellent record of meeting your commitments with success.

Bilingual - possess strong communication skills in both French and English.
 
Job Number: 2536
Job Location: Mirabel, QC, Canada
Rate: 51.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2544 - PROPULSION SYSTEM / FUEL ENGINEER - cv, word doc only

Description:
Design and integration of the system.

Review of the design and documentation of all the aspects related to your system.

Checking for quality of the Supplier's analyses.

Validation and verification of system requirements.

Validation and verification of system performance through design reviews, analyses, rig and aircraft testing.

Definition, preparation and execution of qualification and certification tests.

Working with supplier in the investigation and resolution of test findings.

Preparation or review of qualification or certification reports.

Working with suppliers to establish complete system requirements and system interfaces.

Liaison with stress, loads, reliability, maintainability and safety (RM&S), simulation, customer and operations support departments.

Provide support to business units in Propulsion Control requirement definition, verification and validation, following ARP4754.

Identify issues and obstacles, follow-up and communicate progress.

Prepare reports or presentations.

Bachelor or Master's (preferred) degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of ten (10) years.

Possess very good knowledge in Propulsion Control Systems and their integration on the aircraft.

Have a background in design, integration, development and certification of Propulsion Systems.

Are cognizant of the relevant Airworthiness Regulations and certification process.

Have good oral and technical writing skills in English and French (required).

Are motivated, self-starter, organized, autonomous and able to work under limited supervision.

Are a team player and able to work with suppliers and customers.

Are a dynamic person with initiative, a strong sense of responsibility and good judgment.

Have knowledge of MS Office software (essential).
 
Job Number: 2544
Job Location: Montreal, Canada
Rate: 56.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2550 - PROJECT MANAGEMENT - METHODS - cv, word doc only

Description:
Analyze the feasibility and impacts of requests for changes from the program management group (PCR, RFQ ...).

Plan and implement changes by ensuring logical sequencing aligned with key aircraft milestones.

Support production on technical issues.

Participate in the improvement of manufacturing processes.

Participate in the development and updating of processes and procedures methods.

Collaborate with stakeholders (project management, logistics, production, quality).

Participate in continuous improvement through the system achieve excellence.

Bachelor Degree or Technologist (DEC / College Degree)

3-5 years of experience and more in aeronautics or as agent methods.

Have a good sense of organization, planning and problem solving.

Have a developed client spirit, good communication skills and are comfortable working with multidisciplinary teams.

Are functional in the English language, both spoken and written.

Good adaptability, you are mobile and flexible.

Comfortable reading drawings, technical specifications and have some knowledge of the various manufacturing processes (assembly, sub-assemblies, parts details, composite manufacturing, installation of systems, etc.).

Knowledge of BANN, CATIA V5, and ENOVIA will be considered assets
 
Job Number: 2550
Job Location: Montreal, Canada
Rate: 51.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2551 - REPAIR DESIGNER - ISE STRUCTURES - cv, word doc only

Description:
Actively support the Client Aircraft design team to ensure customer expectations are met.

Design generic repairs for metallic and composite structures.

Design specific repairs for damages exceeding Aircraft Structural Repair Publication (ASRP) limitations.

Support operators with technical support on repair-ability of their Client Aircraft fleet.

Perform investigation on in-service structural issues affecting reliability, dispatch-ability and repair-ability.

Participate in the design and support of structural modifications.

Represent Client Customer Support in internal and external committees.

Participate in the continuous improvement initiatives of the Customer Support organization.

Bachelor degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of five (5) years in the aerospace industry.

Detailed knowledge of CATIA V5 (preferably R19) and Enovia.

Are comfortable in interrogating aircraft structure repair.

Knowledge of MS Office software (Word, Excel, PowerPoint, etc).

Dynamic person with initiative, a strong sense of responsibility, customer oriented and good judgment.

Are organized, able to manage your time and prioritize tasks effectively, while working toward tight deadlines.

Bilingual - have strong, written and spoken, communication skills in English and French.

Available for occasional travel on short notice.

Having knowledge of Client Aircraft engineering, drawing and configuration control systems is an asset.

Having detailed knowledge of airline operation, engineering and maintenance is an asset.
 
Job Number: 2551
Job Location: Mirabel, Canada
Rate: 55.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2 Aircraft Stress Engineers - Composites

Description:
Aircraft composite stress engineering contractors needed.
MUST BE US PERSONS.
Ability to work in a fast paced environment.
MUST have a good Composites Primary Airframe Structures background.
FAR 23 experience is a huge plus.
Classical hand analysis, Nastran, FEMAP a plus
US PERSONS REQUIRED

Position Responsibilities
This is a Senior Level Contract Stress Analyst position.
General Minimum Requirements:
• Education: MS with 8+ years, or BS with 1O+ years of relevant experience
• Create engineering criteria and analysis methods to ensure that the work meets all program requirements (e.g., airworthiness, customer requirements, internal methods and processes, etc.).
• Actively develop and evaluate plans for activities and soundness of proposed methods and analysis to meet the program schedules and airworthiness standards.
• Select appropriate material systems for structures applications and identify all material testing requirements.
• Identify and communicate technical risks to the relevant stake holders through program status reports in a timely manner.
• Review all program critical documents such as stress reports, manufacturing plans and procedures, and structural test plans in a timely manner to ensure compliance with design and loads requirements.
• Resolve complex engineering issues in creative and effective ways as to balance technical product, cost, and schedule.

Must be a US Citizen, or Greencard holder.

THE STRUCTURES COMPANY IS AN AA/EOE
 
Job Location: Manassas, VA
Rate: $75-85/hr DOE
Per Diem: Yes
Overtime: Possible
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Analysis Engineer

Description:
Seeking a first-rate aerospace Composite Stress Analysis Engineer with experience in vehicle stress analysis, repairs, and production manufacturing. The composite stress analyst will compile analysis, reports, models, and margins of safety into standardized formats for upload into TSC’s product lifecycle manager. Additionally, the analyst will support the design engineering staff with drawing release. The stress analyst is ultimately responsible for ensuring the vehicle structural design meets the customer mission requirements with positive margins of safety.

Your Mission

Responsibilities:
• Reviews, updates, and compiles engineering analytical definition of structural components and assemblies based on records from the prototype build project
• Develops standardized analysis criteria and templates
• Plays an integral role in the work flow release process for all structural designs
• Supports review of manufacturing plans and procedures to ensure compliance with design and loads requirements
• Supports the creation of structural test plans which will be used to verify manufacturing
• Oversees and coordinates other Stress Engineer work and act as a Commodity Stress Focal.
• Handles Pre-and-Post flight structural NRIs for Fuselage Structure, reviews other team members work on NRIs assigned to them.
• Handles Inspection inquiries, requiests, and new inspection from VGMX team.
• Defines primary structures inspections as needed for flight test and EIS.
• Compiling and implementing tools, methods and procedures learned and implement with team.

What You Bring
Basic Qualifications

• Bachelor’s degree from an accredited institution, with a concentration in a relevant Engineering discipline
• Minimum 10 years of applicable experience in the analysis of structural systems using strength of materials and finite element based methods.
• Minimum 5 years experience with strong understanding of composites analysis, manufacturing and sizing of composite structures.
• Minimum 5 years experience with strong understanding of FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures.
• Minimum 3 years supporting Structural Tests with knowledge and practical experience on FEM/Strain gage data correlation.
• Experience with free-body diagrams and classical stress analysis techniques.
• Excellent verbal and written communication skills
• Excellent organizational and problem-solving skills
• Excellent computer skills, including Outlook, Word, Excel and PowerPoint
• Applicants must be “U.S. persons” as defined by the ITAR (22 CFR §120.15)

Preferred Skills and Experience
• Hands-on experience with composites part fabrication and assembly processes.
• Proficiency in FEMAP a plus
• Pilot, aircraft homebuilding and rapid prototyping experience a strong plus
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
• Experience with manufacturing-based ERP systems, such as Oracle, is a plus

Physical and/or Additional Requirements

• None


The Structures Company is an AA/EOE.
 
Job Number: 499
Job Location: Mojave, CA
Rate: $75-$85/Hr. ***DOE***
Per Diem: Yes
Overtime: Yes
Duration: 8+ Months
Start Date: ASAP
Input Date: 09/17/2021
Last Updated: 09/28/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
3 Aircraft Stress Engineers with Composites

Description:
3 Aircraft Composite Stress Engineers Needed.
Require 10+ years of aircraft/aerospace stress analysis with a good composites background.
Previous FEMAP experience is a plus.
Composite airframe analysis experience a MUST.
MUST be US Persons

Qualifications:
-Experience in aircraft or spacecraft composite, design and analysis processes
-Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures
-Minimum 10 years or more of applicable experience in the analysis of structural systems using strength of materials and finite element based methods
-Experience with free-body diagrams and classical stress analysis techniques
-Experience with FEMAP
-Rapid prototyping experience a strong plus
-Excellent computer skills, including Outlook, Word, Excel and PowerPoint
-Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
-Applicants must be U.S. persons as defined by ITAR
Educational Requirements-
Bachelors degree from an accredited institution, with a concentration in a relevant Engineering discipline

The Structures Company is an AA/EOE.
 
Job Location: Mojave, CA
Rate: $80-85/hr DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Last Updated: 01/04/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Analysis Engineer

Description:
Requirements:

Looking for someone with at least 2 years of primary composite Stress Analysis experience.
Extensive experience developing and running finite element internal loads models.
Extensive experience calculating strength and updating Global FEM properties
Experience with full scale static testing is a plus.
Must have experience with FEA/FEM tools like Nastran, Patran, or FEMAP.
Writing certification reports is a plus
Experience with light aircraft a plus. Experience with larger aircraft is ok as long as the experience was with composite structure.
Experience and a high level of comfort working in undefined environment and ability to work without direction.


Job description:

This is a Senior-Level stress analyst position in the Aerostructures Engineering Organization. General responsibilities include leading and coordinating the stress activities within an assigned project, establishing and communicating clear task expectations, defining engineering criteria and analysis methods to ensure consistency, and reviewing analysis and reports for accuracy and conformance with program requirements.


The ideal candidate for the Senior Airframe Stress Analyst will possess the following skills and experience:
Act as the first level of authority within the team for technical approval and exercise latitude in determining technical objectives of programs.
Must have a thorough working knowledge of the design of flight vehicles or vehicle systems to a set of requirements or standards such as 14 CFR Part 23 and Part 25, MIL-HDBK-516C, or NASA Procedural Requirements as they relate to certification of airframe structures.
Leveraging diversified knowledge and engineering experience, provide directions and coordinate work within the assigned analysts and actively participate in daily operations as required to meet schedules and resolve issues.
Work with inter-disciplinary teams such as Design, Loads, Materials & Processes and Manufacturing groups to provide solutions to mitigate form, fit, function, producibility, and maintainability aspects of airframe structural designs.
Excellent verbal and written communication skills, including strong interpersonal and communication skills in dealing with program management and customers.
Demonstrate proficiency in FEA tools.


Responsibilities:
Create appropriate engineering criteria and analysis methods to ensure that the work meets all program requirements (e.g., airworthiness, customer requirements, internal methods and processes, etc.).
Actively develop and evaluate plans for activities and soundness of proposed methods and analysis to meet the program schedules and airworthiness standards.
Select appropriate material systems for structures applications and identify all material testing requirements.
Identify and communicate technical risks to the relevant stake holders through program status reports in a timely manner.
Review all program critical documents such as stress reports, manufacturing plans and procedures, and structural test plans in a timely manner to ensure compliance with design and loads requirements.
Resolve complex engineering issues in creative and effective ways as to balance technical product, cost, and schedule.
Mentor, coach and motivate the stress team members in every way possible.


Minimum Requirements (education and experience):
4 year engineering degree from an accredited university (BS in Mechanical Engineering, Aerospace Engineering or similar)
8+ years of applicable experience with a Master degree or 10+ years of applicable experience with a Bachelor degree
Demonstrated ability to use Microsoft Excel, Word and Powerpoint


The Structures Company is an AA/EOE.
 
Job Number: 243
Job Location: VA
Rate: $80-$85/HR. **DOE**
Per Diem: Yes
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineers

Description:
Skill set:
Must have Primary and secondary structural design experience. Light aircraft (FAR 23) is preferred.

Excellent detail design skills, along with a combination of composites and metal part and assembly design background. Must have CATIA V5 and CPD experience (composite part design workbench in CATIA).


Position Responsibilities
Under the direction of project design engineering, serve as a member of a design team providing structural detail design for commercial light/general aviation aircraft. The main product line will require design-to-build activities for a commercial (Far 23) aircraft composed of primary/secondary metallic structure (some composite).

Minimum Requirements
· US Citizen, Green Card Holder or Permanent Residence Status
· A degreed candidate is highly desired
· 10 years of experience in Aerospace design is a minimum
· CATIA v5 (R25/R26 preferred)
· Entirely 3D CAD Design using Model Based Definition (MBD)
· Experience with ENOVIA\SmarTeam
· Experience with FAR 23 aircraft is preferred

The Structures Company is an AA/EOE.
 
Job Number: 242
Job Location: Manassas, VA
Rate: $72-$75/Hr. **DOE**
Per Diem: Yes
Duration: 9 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
APG Mechanic URGENT URGENT / no clearance / 3 years’ experience of C-130 Flight Line experience required SC

Description:
164387 Job Title: APG Mechanic

Work Site Address: Greenville, SC 29605
Max Pay Rate: 25-29/hr DOE
Start Date: ASAP
End Date: 9 months
Position Type: Contract
1 more opening
• Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company.

Job Summary:
Inspects, troubleshoots, repairs, overhauls and modifies aircraft systems and powerplants in accordance with established written procedures, specifications, and standards. Candidate must be knowledgeable in aircraft systems operation and maintenance to include landing gear, powerplants, flight controls, disassembly, reassembly, rigging and aircraft movement.

Must be able to read and speak English. Comprehend documents such as safety rules, operating maintenance instructions and procedure manuals.

Mission essential functions and other duties may be assigned as required.

Qualifications and Education Requirements
• Candidate must possess at minimum, 3 years of C-130 Flight Line Experience
• Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company

In order to perform the essential functions of this job, the employee is regularly required to perform repetitive movements, work overhead, use hands to grasp, handle, and/or feel, reach with hands and arms. The employee is frequently required to stand, walk, stoop, kneel, squat, crawl, twist, and work on or in the aircraft. The employee is occasionally required to sit, climb, and balance. The employee must frequently lift and/or push or pull up to 25 pounds and occasionally lift and/or push or pull up to 50 pounds. Specific vision abilities required by this job include close vision, peripheral vision, depth perception and ability to adjust focus. While performing the essential functions of this job, the employee will be required to wear Personal Protective Equipment (PPE) as needed to perform job tasks. The employee is regularly exposed to vibration. The candidate will be frequently exposed to moving mechanical parts, fumes or airborne particles. The candidate must be able to properly use, handle and dispose of hazardous materials, and toxic or caustic chemicals per Government regulations and company procedures. The employee is occasionally exposed to wet and/or humid conditions, high, precarious places, and outside weather conditions. The candidate is required to work in a safe and efficient manner while maintaining a clean, FOD-free work area.

Preferred Skills
FAA Airframe and/or Powerplant License a Plus!
 
Job Number: JEG -1656-1
Job Location: Greenville, SC
Rate: 25-29/hr max
Duration: 9 -18 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Advanced Composite Technician II

Description:
Advanced Composite Technician II under moderate supervision, perform one or more of the following composite part manufacturing functions: lay-up, cutting, bagging, autoclave, trimming, and/or repair, in a production environment.

Principal Duties and Responsibilities:

Advanced Composite Technician II Manufacture a variety of composite aircraft parts to meet manufacturing specifications, in a team-oriented work environment. 2. Demonstrate the ability to meet the requirements of the Manufacturing Competencies at the appropriate level in the Employee Effectiveness Review. 3. Read work orders, blueprints, lofts, sketches and operation sheets to determine sequence of operations. 4. Must be skilled in the use of special tools and equipment to include precision measuring devices such as 6' scale, 1' micrometer, 6' dial caliper. 5. Check all work and ensure a defect free assembly prior to inspection. 6. Maintain and use all logs and records. Example: MIR sheets, DMTs, Crabs, PCOs, DR/DI, etc. 7. Maintain a neat and orderly work area, support the company FOD and 5S programs, and comply with all safety regulations. 8. Support Lean activities. Must be able to work any shift.

Education and Experience Requirements:
High School graduate or GED. Basic computer skills. Two (2) years related composite experience. Ability to work with composite resins and materials. Requires ability to read a interpret blueprints. Read and interpret 6' scale.
 
Job Location: Tulsa, OK
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
Location: Palmdale, CA
Rate: $70.00 - $80.00/HR
Duration: 1 year contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

Job Description:
- Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design.
- Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations.
- Will support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations.
- Will work production floor support from receipt of problem, coordination of answer to release of engineering change.
- Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight.
- Establishes structural specifications, performs stress analysis, and conducts performance tests. '


Required Skills:
- Catia V5 experience is required.
- Airframe experience is required.
- Experience designing composites is a plus.
- Experience with Siemens Fibersim is a plus.

Education:
- Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 9610
Job Location: Palmdale, CA
Rate: $70.00 - $80.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer / Catia V5 airframe design composites Fibersim - Clearance URGENT NEED CA

Description:
1090-1 Aeronautical Engineer / Catia V5

Work Location: Palmdale, CA
Status: Open

Qty: 10
12 months

Job Description:
Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design. Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations. Will support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations. Will work production floor support from receipt of problem, coordination of answer to release of engineering change. Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight. Establishes structural specifications, performs stress analysis, and conducts performance tests.

Catia V5 experience is required.
Airframe experience is required.
Experience designing composites is a plus.
Experience with Siemens Fibersim is a plus.

Work Location: Palmdale, CA
Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
Pay Rate: $68.00 Hourly

Experience
Areas of Expertise CATIA Yes 1 4 - 6 Years
Areas of Expertise Composites and Materials No 2 2 - 4 Years
 
Job Number: JE-1090-1S5
Job Location: Palmdale, CA
Rate: 68/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Embedded Software Engineer -Simulations (73)

Description:
*This is a full time, 1 year contract position, located on site in Fort Worth*



We are looking for a contract Real Time Embedded Software Engineer to design, develop, implement, and verify real time aircraft or missile simulation software.



Day to day work may include full dome simulations, high fidelity, man in the loop simulation/mission systems, vehicle testing and integration, and verification/validation.



Required:

*9+ years’ experience developing, integrating and testing simulation software in a high-level language.

*Embedded RTOS development experience

*Experience in Rapid Prototyping, man in the loop simulations, and system verification/validation

*Active Secret Clearance, with an investigation in last 5 years.

*Engineering Degree



Pluses:

*Experience in Programming in C++ and/or Matlab and Fortran

*Good mathematics including curve fitting and regression, linear algebra, algorithms.

*Experience with DOFs and missile applications.

*Familiar with Kalman Filters
 
Job Number: 73
Job Location: Fort Worth, TX
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Manager

Description:
Currently looking for an experience Flight Test Team Manager to fill a role with a company in Moses Lake, WA. Interested candidates should have flight test management or engineering management experience.

Responsibilities of the Flight Test Team Manager:
Assign work, goals to the FTV team members.
Ensure test readiness, deliverables are on track.
Ensuring no injuries or accidents.
Ensure short and long term program schedules are accurate (updated by flight operation group and Maintenance).
Update and present short term schedule (90 days) to Functional Leads weekly.
Manage the entire FTV schedule through certification.
Provide daily and weekly FTV status.
Ensure support for short term schedule activities via Functional Leads.
Resolve issues with Functional Leads.
Setting aircraft configuration, schedule, testing and maintenance goals.
Implementing process improvements directly related to their FTV.




Requirements
Strong flight test experience.
Engineering management experience.
Aircraft configuration experience.
 
Job Location: Moses Lake, WA
Per Diem: Possible
Overtime: Yes
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Adnan Salaka
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Structural Test Engineer / Stress Analyst

Description:
The candidate will support, perform and manage analysis, research and development of structural engineering specification for ground test and qualification to include structures.

The candidate must have component design, analysis and test experience of dynamic and airframe components. They must also understand the design process, test facilities, test conduct, review / correlation of data and reporting.
 
Job Number: 1910099483
Job Location: Stratford, CT
Per Diem: split
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Structures Design Lead

Description:
Aircraft Structures Design Lead who will be responsible for leading all structural design activities related to aircraft. Will report directly to the Structures Manager.

Duties will include, but are not limited to:
• Support building and lead our Aircraft Structural Design team.
• Strong knowledge and understanding of latest structural design, as well as manufacturing trends in the Aerospace industry.
• Analyze the applicability of new and emerging technologies and advanced techniques.
• Serve as the primary design focal between program, Tier 1 supplier and regulatory authorities.
• Provide technical leadership in design and development of the preliminary structures layout that meets weight, cost, manufacture-ability and certification requirements.
• Develop schedule, cost and supplier management milestones.
• Support new business development, trade studies and proposal activities.
• Support the structures team in development of the PSP, PSCP, issue papers, and other certification documents.
• Support technical review of supplier capabilities to facilitate source selection.

Requirements:
• Must be a US or Canadian citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772.
• Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure / confidentiality agreement with current or any former employer that would prevent you from fully performing the duties of the position.
• Must have a Bachelor’s Degree in Aerospace or Mechanical Engineering, or similarly related area. Master’s Degree strongly preferred.
• 12+ years of experience in performing design of large aerospace structures.
• 3+ years of leadership experience on an aircraft development program.
• Knowledge of the conceptual and preliminary design phases of aircraft development is strongly preferred.
• Thorough understanding of the structural design requirements for Part 25 certification.
• Must have demonstrated leadership capabilities.
• Demonstrated success in dealing and influencing internal and external stakeholders.
• Strategic thinker with very strong decision making and communication skills.
• Highly self-motivated with a strong bias for action, and excellent problem-solving skills across multi-disciplinary skill sets.

The Structures Company is an AA/EOE.
 
Job Number: 281
Job Location: Reno, NV
Rate: OPEN - DOE
Per Diem: Yes
Overtime: Possible
Duration: CONTRACT TO HIRE
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Systems Design Engineer

Description:
Description
Knowledge of air vehicle systems, systems integration, engineering design, the drawing release process and subsystems/component qualification
Develops and refines system level requirements for vehicle systems based on customer and implied requirements
Ability to evaluate flight test and component qualification data for verification and validation purposes and to identify further testing or development/re-design work
Reviews, updates, and compiles engineering definition of aircraft system components and assemblies based on records from the current prototype aircraft program
Supports review of manufacturing plans and procedures to ensure compliance with design requirements
Supports the creation of system test plans which will be used to verify the design intent meets requirements
Confers with management, engineering, and other staff regarding manufacturing capabilities, production schedules, and other considerations to facilitate production processes


Qualifications
B.S. degree in Mechanical, Aerospace, or similar discipline is required
8+ years of relevant industry experience; 10+ years is preferred
Experience with CATIA V5 strongly preferred, or SOLIDWORKS or equivalent
Experience in aircraft systems design, (mechanical, pneumatic, electrical) assembly and test processes
Experienced design (broad based aircraft experience) with knowledge of design manufacturing tolerances for production of components using GD&T
Experience with Product Lifecycle Management tools (PLM software), Requirements management tools and configuration management
Excellent verbal and written communication, excellent computer skills including Microsoft Word, Excel, and PowerPoint
Strong team player and ability to work independently with excellent organizational and problem-solving skills
Knowledge and experience with AS9100 a plus
Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, DO-160, military (MIL-STD-810) or NASA are highly desired
Experience with manufacturing based ERP systems a plus


The Structures Company is an AA/EOE.
 
Job Number: 266
Job Location: CA
Rate: $65-$70/Hr. **DOE**
Per Diem: Yes
Overtime: Yes
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airframe Stress Lead

Description:
Airframe Stress Lead who will be responsible for all aspects of structural integrity and implementing long-term roadmap on stress methods development. Will report directly to the Structures Manager.

Duties will include, but are not limited to:
• Support building and lead team developing stress analysis methods and tools for aircraft design and certification.
• Develop road map for structures team - in partnership with Tier 1 suppliers and Partners - in the areas of analysis methods, tools and failure criterion for the entire aircraft.
• Support IPT leads in development of the PSP, PSCP, issue papers, and other certification documents.
• Provide input to maintenance program, inspection intervals and inspection methodologies.
• Support new business development, trade studies and proposal activities.
• Support design reviews with IPT teams and partners/suppliers.


Requirements:
• Must be a US or Canadian citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772.
• Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure / confidentiality agreement with current or any former employer that would prevent you from fully performing the duties of the position.
• Must have a Bachelor’s Degree in Aerospace or Mechanical Engineering, or similarly related area. Master’s Degree strongly preferred.
• 12+ years of experience in performing stress analysis, developing methods and performing validation testing for Part 25 aircraft components.
• 3+ years of experience in leading stress and/or structural integrity teams.
• Knowledge of the conceptual and preliminary design phases of aircraft development is strongly preferred.
• Thorough understanding of latest structural static, durability and damage tolerance requirements for Part 25 certification.
• Must have demonstrated leadership capabilities.
• Demonstrated success in dealing and influencing internal and external stakeholders.
• Strategic thinker with very strong decision making and communication skills.
• Highly self-motivated with a strong bias for action, and excellent problem-solving skills across multi-disciplinary skill sets.

The Structures Company is an AA/EOE.
 
Job Number: 282
Job Location: Reno, NV
Rate: OPEN - DOE
Per Diem: Yes
Overtime: Possible
Duration: CONTRACT TO HIRE
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler FL

Description:
164400
Job Title: Assembler
Job Category: Manufacturing

Work Site Address: Pinellas Park, FL 33782
Max Pay Rate: 18-23HR PAY
Start Date: ASAP
End Date: 3-6 Months CTH
Position Type: Contract


Job Summary:
Performs a variety of operations to manufacture, assemble and/or refurbish aircraft parts and structures such as F-16 canopies, F-35 canopies, and C-130 sub-assembly components. Assemblies can require controlled tooling as well as build to print. Tasks include aligning parts on jigs using both templates and fixtures. Performs part-fitting operations such as minor filing, sawing, burring, crimping, trimming, framing, drilling, reaming, riveting, countersinking, and cold working. Measures parts with a variety of methods to verify dimensions. May modify incomplete and complete assemblies to incorporate changes and perform repairs. Works from blueprint diagrams, drawings, specifications, and shop orders. Monitors and verifies quality and develops corrective action. Performs other duties as assigned. No relocation assistance provided.

Qualifications and Education Requirements
• 1 - 2 years of sheet metal assembly/aircraft sheet metal structure experience is required.
• Previous experience as an Assembler and/or Aircraft Structures Mechanic is highly preferred.
• Previous aircraft structure on the F-16, C-130, and F-35 is highly preferred.
• Interpersonal skills and ability to interface with all levels, to work in teams or independently and communicate effectively with co-workers or supervisory staff.

• High School Diploma or equivalent.

• Mathematical ability to perform and/or understand the calculations used in assigned areas and ability to read and interpret blueprints, specifications and technical data.

• Competently uses computers and other systems to access, maintain and manipulate data.


Candidate who are submitted for this position must be prepared to interview in person.
 
Job Number: LM-006
Job Location: Pinellas Park, FL
Rate: 18-23/hr DOE
Per Diem: no
Duration: 6 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
Location: Fort Worth, TX
Duration: 6 month contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)


****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****


Job Description:
- Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
- Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.
- This position is for an engineer working in the Fort Worth IFG Aircraft Computers Team.
- Job responsibilities will include supporting development of Avionics Mission Computers on aircraft.
- Must be able to work in a fast paced environment and be able to work independently with limited oversight from team lead and manager.
- Must able to travel both domestic and internationally.


Activities include:
- Electronic hardware testing and troubleshooting
- Support Software Development efforts for target hardware
- Review and improve Hardware Specifications
- Work with Suppliers & Engineering during product development lifecycle
- Support of system integration activities
- Development/review of detailed engineering documents for software and hardware release
- Financial analysis of planned team activities
- Development of estimates to complete, development of customer estimates
- Generation of slide presentations in support of customer briefings
- Support development of Supplier Statement of Work & Proposals
- Work closely with Supply Chain Management


Education:
- Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 10333
Job Location: Fort Worth, TX
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer - Clearance TX

Description:
163995
1334-1 Avionics Engineer
Work Location: Fort Worth, TX
Status: Open

Qty: 1
Desired Start Date: 2/4/2019
End Date: 9/13/2019

Job Description:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

This position is for an engineer working in the Fort Worth IFG Aircraft Computers Team. Job responsibilities will include supporting development of Avionics Mission Computers on aircraft.
Activities include:
• Electronic hardware testing and troubleshooting
• Support Software Development efforts for target hardware
• Review and improve Hardware Specifications
• Work with Suppliers & Engineering during product development lifecycle
• Support of system integration activities
• Development/review of detailed engineering documents for software and hardware release
• Financial analysis of planned team activities
• Development of estimates to complete, development of customer estimates
• Generation of a slide presentations in support of customer briefings
• Support development of Supplier Statement of Work & Proposals
• Work closely with Supply Chain Management
Must be able to work in a fast paced environment and be able to work independently with limited oversight from team lead and manager. Must able to travel both domestic and internationally.

Work Location: Fort Worth, TX
Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
Pay Rate: $62.00 Hourly
 
Job Number: JE-1334-1S
Job Location: Fort Worth, TX
Rate: 62/hr max
Per Diem: no
Duration: 7 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Specialist (S-70 and Blackhawk)

Description:
The candidate must have at least 20 years of experience specifically supporting and/or maintaining Avionics and Electrical equipment on the Sikorsky S-70 and Black Hawk helicopters.
Advanced troubleshooting ability is required.
Familiarity with MS Dynamics and at least 5 years’ experience with Sikorsky Systems such as Matrix One, ERC, SAMS, EPATS, RFA, Worldview, and Technical Publications required.
No exceptions will be made due to critical nature of this support.
Assets working this project must be experienced in direct support of these fielded aircraft.
 
Job Number: 1910097227
Job Location: Trumbull, CT
Per Diem: split
Overtime: possible
Duration: 2 years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Subsystem Lead Engineer

Description:
seeking an Avionics Subsystem Engineer with strong experience enabling him/her to be responsible for all activities related to the design, development, integration, testing and certification of the primary avionics, secondary avionics, pitot statics, navigation, synthetic vision, enhanced vision, communications, antennae, radar, data acquisition, safety systems, health monitoring & reporting and integrated modular avionics. The successful candidate will manage the various avionics systems design and system’s suppliers, as well as all design and certification activity required. The Avionics Subsystem Lead Engineer will work out of our Reno, NV, headquarters and report to the Director of Cockpit IPT.

Duties include, but are not limited to:
• Develop avionics systems design, architecture and product plan, including qualification and certification plans
• Provide subject matter expert level technical leadership, mentoring and guidance on both practical and theoretical aspects of avionics systems
• Define requirements for the avionics systems to ensure compliance with regulations and customer requirements
• Provide validation and verification of avionics systems requirements
• Perform avionics systems tests and certification, and provide system and certification documentation
• Interface directly with avionics systems suppliers
• Manage the avionics scheduling, budget and resources
• Report subsystem status to ensure milestones are met in support of the overall program schedule

Requirements:
• Must be either a US citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772 and ITAR 120.12
• Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure / confidentiality agreement with current or any former employer that would prevent you from fully performing the duties of the position
• Minimum of a Bachelor’s Degree in Aerospace, Electrical Engineering or other relevant Engineering position
• Master’s degree in a technical and/or management specialty preferred
• 10+ years of deep, hands-on experience in Avionics systems development, design and testing in Military, Commercial and/or business jet aircraft
• 3+ years of demonstrated experience leading technical resources and teams, both internally and externally, as well as both on-site and off-site
• In-depth and current knowledge of Part 25 regulatory requirements
• Experience and expertise in the development of commercial and/or high-end business jets strongly desired
• Recent experience in developing avionics systems from concept through certification strongly desired
 
Job Number: 42-005
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Systems Integration Engineer

Description:
Avionics Systems Integration Engineer to join our Avionics team. The scope of the avionics engineering team includes: flight avionics hardware; signal conditioning; data acquisition; actuator control; RF communication; wire harnesses; vehicle guidance, navigation, control; fault tolerance; ground-support electronics hardware and software; and integrated vehicle health monitoring. The ideal candidate will have at least 2 years of experience working with avionics and electrical systems in the aerospace or related fields. A college graduate with related project experience and a passion for aerospace will be considered. We are looking for a generalist who will contribute to several roles in a fast paced environment.

Your Mission
• Design, Integration, and testing of avionics and aircraft electrical systems
• Develop vehicle, system, and component requirements for design, procurement, and test
• Evaluate and select COTS avionics subsystems.
• Work with hardware engineers and subcontractors to define requirements and interfaces for custom avionics hardware
• Create vehicle level schematics
• Plan, execute, and report on vehicle ground and flight testing
• Troubleshoot vehicle systems using schematics, multi-meters, oscilloscopes, bus analyzers, etc.

What you bring
• Experience with digital communication protocols such as RS232, RS422, RS485, Ethernet, MIL-STD-1553, CAN
• Hands-on electrical and/or avionics experience with aerospace or related systems
• Strong understanding of electrical engineering fundamentals
• Printed circuit board design experience is a plus
• Experience with analog and digital circuit design is a plus
• Experience with PCB design, FPGA, microcontrollers, and real-time systems is a plus
• 2 or more years of relevant integration and testing experience in aerospace or similar field
• New college graduates with relevant course and project work will be considered
• Experience with embedded system hardware and software
• Strong troubleshooting, organizational, and written communication skills

The Structures Company is an AA/EOE.
 
Job Number: 277
Job Location: CA
Rate: OPEN - **DOE**
Per Diem: Yes
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Technician 3 FL

Description:
164305
1738 Avionics Technician 3 (Job Number: 19003512)

Number of Openings: 3

Location(s): United States-Florida-Saint Augustine


Shift: Multiple

Target Start Date: Mar 23, 2019

Target End Date: Dec 20, 2019

Pay rate: $30.00
Location: Saint Augustine

Duration of assignment: Up to 1 year

Clearance: None

M66802 Avionics Technician 3

Position Summary / Responsibilities
Installs and troubleshoots avionics systems wiring in aircraft in accordance with technical specifications, engineering instructions. Fabricates, installs and tests installation, routing, clamping and wiring harnesses. Reads wiring diagrams and blueprints.

Leveling Factors:

Knowledge
Considerable knowledge of the job. Substantial acquaintance with and understanding of general aspects of the job with a broad understanding of the detailed aspects of the job.

Supervision Given and Received
Direct supervision and instructions given for routine work and detailed instructions given for new activities or special assignments. General supervision and instructions given for routine work and detailed instructions given for new activities or special assignments.

Typical Duties and Tasks
Duties & tasks are varied but standardized. Performs some more advanced functions. Resolves routine questions and problems, and refers more complex questions to higher levels.


Basic Qualifications: High school / GED Six years of avionics technician type of experience
Preferred Qualifications: Prior military aircraft avionics background and flight line operations experience preferred
 
Job Number: MB-1738
Job Location: St. Augustine, FL
Rate: 30/hr
Per Diem: no
Duration: 6 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Wire Harness Design & Manufacturing Engineer

Description:
Seeking an experienced and talented Avionics Wire Harness Design & Manufacturing Engineer to join our Avionics team. The scope of the avionics engineering team includes: flight avionics hardware; wire harnesses; LRU design, & instrumentation. The ideal candidate will have at least 4 years of experience working with electrical harness design, electrical harness manufacturing, & vehicle integration.

Qualifications/Requirements:
• Produce wire harness assembly (formboard) drawings
• Produce wire harness manufacturing instructions
• Produce wire harness termination drawings
• Strong understanding of wire harness manufacturing process and formboard drawings
• Strong understanding of electrical schematics & termination drawings
• Experience working with electrical designers during schematic creation
• Experience integrating wire harnesses in vehicle
• Extensive knowledge of aircraft-type wiring and components such as connectors, backshells, conduits, relays, switches, terminal junction system components, etc.
• Catia V5 Electrical Workbench is a plus
• Experience with Mentor Graphics is a plus
• Experience with composites is a plus
• Must have a B.S. Engineering degree from an accredited university

The Structures Company is an AA/EOE.
 
Job Number: 262
Job Location: CA
Rate: **DOE**
Per Diem: Yes
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics/Electrical Design Engineer

Description:
Seeking an Avionics/Electrical Design Engineer.The ideal candidate will have at least 4 years of experience working with avionics and electrical systems design. The scope of the avionics/electrical design engineering position includes: Avionics and electrical system integration and design; wire harness design; electrical load analysis and sizing; electrical component selection.

Knowledge/Experience
• Avionics systems
• EWIS & SAE AS50881
• Schematic Drawings
• Electrical Load Analysis

Responsibilities
• Aircraft electrical system design and component selection
• System integration design for avionics equipment in aircraft/spacecraft including preparation of schematics and wiring harness drawings
• Responsible for the technical performance of the avionics system
• Develop solutions to address avionics obsolescence

Educational Requirements:
Must have a B.Sc. Electrical Engineering degree from an accredited university

Professional Requirements:
• 4 or more years of relevant avionics engineering experience on development aircraft and/or spacecraft
• Strong troubleshooting, organizational, and written communication skills
• Applicants must be U.S. persons as defined by the ITAR (22 CFR §120.15)


The Structures Company is an AA/EOE.
 
Job Number: 271
Job Location: CA
Rate: $70+/Hr. **DOE**
Per Diem: Yes
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Catia V5 Instructor

Description:
Location: Tulsa, OK
Rate: $60.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
Ideal Candidate will primarily teach, assist and mentor employees with CATIA v5 and SmarTeam. Candidate will support Engineers and be expected to answer questions intelligently in a class setting. This candidate will primarily be on location in Tulsa and be expected to travel back and forth to Savannah and sub tier supplier sites to support the company in Oklahoma.
- CATIA v5 experienced with 5000+ hours.
- All Level 1 tools CATIA v5 (Part Design, Assembly, Drafting).
- Level 2 tools CATIA v5 Generative Surfacing, Free Style Shaping, Generative Sheetmetal, Generative Stress Analysis.
- Other tools: CATIA v5 Composites, Electrical EHI, Capitol Harness, Tubing experience a plus.
- Quantitative experience with Geometric Dimensioning and Tolerances a plus.
- Experience working within PDM systems such as Enovia, SmarTeam or NX/Teamcenter.
- Formal Classroom instruction experience required for CATIA and PDM.

Education and Experience Requirements:
- Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
- See Other Requirements in Job Description.
- 5 years in specific technical discipline or 10 years broad eng experience in several technical disciplines with Bachelors.
- Experience credit considered for related adv degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principal Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 10486
Job Location: Tulsa, OK
Rate: $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Design Checker

Description:
Unique Skills:
Must have engineering experience in aircraft interiors design creation and/or design quality control using CATIA V5. Software experience preferred in SmarTeam, AutoCAD, and Excel (including macros). Aircraft experience preferred in Parts 25 and 135 certification; cabinet, monument, and plumbing design; designing/checking to customer design and/or spec package; as well as continuous improvement processes.

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) ys in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Principle Duties and Responsibilities:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area
• Actively works to improve daily processes and ensures all work meets customer requirements
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
• Perform other duties as assigned.
• Advanced degree in engineering related field preferred
• The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 24-327
Job Location: Savannah, GA
Rate: $46 - $50
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Design Engineer

Description:
Position Purpose:
• Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Unique Skills:
• Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
• Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
• Knowledgeable with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
• Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam. Design Engineer will be required to liaison with the shop on engineering issues.
• Design assignments Item Installation Analysis, Similarity Analysis and Mount Configuration along with any other required items.
• Design engineer will employ design standards consistent with company standards and accepted design methods are executed under the direction of the Mechanical Engineering Group Head to meet the manufacturing schedule.
• Additional responsibilities are out lined in the job description and as assigned by the Mechanical Engineering Group Head.
• Preferred skills: Mechanical Design in Aircraft Cabin Interiors, CATIA, Smarteam, AutoCAD, Microsoft Project, Excel and Power Point.

Principle Duties and Responsibilities:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Other Requirements:
• Advanced degree in engineering, or related curriculum preferred
• The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 24-336
Job Location: Savannah, GA
Rate: $58
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Design Quality Engineer

Description:
Location: Savannah, GA
Rate: $46.20/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
- Must have engineering experience in aircraft interiors design creation and/or design quality control using CATIA V5.
- Software experience preferred in SmarTeam, AutoCAD, and Excel (including macros).
- Aircraft experience preferred in Parts 25 and 135 certification; cabinet, monument, and plumbing design; designing/checking to customer design and/or spec package; as well as continuous improvement processes.

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) years in specific technical discipline or ten (10) years broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principle Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 10516
Job Location: Savannah, GA
Rate: $46.20/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Liaison Engineer

Description:
Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Unique Skills:
• The primary function of Aircraft Completions Liaison Engineering department is to support operations aircraft by coordinating all engineering efforts required to facilitate the installation of the aircraft interior.
• Actively develop engineering product improvements.
• The Liaison engineer shall support aircraft customization requests including design, fabrication, testing, and final delivery.
• Additional responsibilities include developing alternative design approaches, including establishing design verification & validation models specification of applicable test, conductance of test to show compliance with applicable regulations.
• Successful applicant will be self-motivated, and able to develop an approach from initial procedure review, data processing, task optimization, and specifically communication of technical information to a wide range of audiences, meeting customer needs.
• Candidates should have a willingness to work off-shift and weekend hours on occasion when program milestones require.
• Applicants must be willing to constantly review existing processes and methods for continuous improvement.
• Ideal candidates for the Completions Liaison Engineer will have mechanical engineering and previous liaison engineering experience with cabin interiors and systems.
• Ensure aircraft schedule and budgets are met to support schedule for each aircraft's Supplemental Type Certification (STC) for on-time customer delivery.
• Commodity support to include but not limited to: -Seats -Galley -Lavs -Liners -Water System -Mechanical Systems

Education and Experience Requirements:
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Principal Duties and Responsibilities:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area
• Actively works to improve daily processes and ensures all work meets customer requirements
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
• Performs other duties as assigned
 
Job Number: 24-314
Job Location: Savannah, GA
Rate: $54.66
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Structural Design Engineer Openings

Description:
Design and configuration of composite primary aircraft structure.
Experience during preliminary/conceptual design phase required.
Support of subsystems integration and packaging into primary structure.
Strong knowledge and understanding of latest structural design, as well as manufacturing trends in the Aerospace industry.
Analyze the applicability of new and emerging technologies and advanced techniques.
Serve as a design focal between the program and Tier 1 suppliers.
Provide technical support in design and development of the preliminary structures layout that meets weight, cost, manufacture-ability and certification requirements.
Support new business development, trade studies and proposal activities.
Support technical review of supplier capabilities and progress.

Requirements:
Must be a US or Canadian citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772.
Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure / confidentiality agreement with current or any former employer that would prevent you from fully performing the duties of the position.
Must have a bachelor’s degree in Aerospace or Mechanical Engineering, or similarly related area.
8+ years of experience in performing design of large aerospace structures.
Strong composite structural design background.
Proficiency with CATIA V5 and Teamcenter PLM is preferred.
Knowledge of the conceptual and preliminary design phases of aircraft development is strongly preferred.
Thorough understanding of the structural design requirements for Part 25 certification is preferred.
Highly self-motivated with a strong bias for action, and excellent problem-solving skills across multi-disciplinary skill sets.

The Structures Company, LLC is an AA/EOE.
 
Job Location: Reno, NV
Rate: Open
Per Diem: Yes
Overtime: Possible
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Technician III

Description:
Currently seeking an Advanced Composite Technician. The ideal candidate will possess at least three (3) years of related composite experience.

Under minimal supervision, perform one or more of the following composite part manufacturing functions: complex lay-up, cutting, bagging, autoclave, trimming, and/or complex repairs, in a production environment. Provide specialized technical assistance and interact with team members to resolve manufacturing issues.

Principal Duties and Responsibilities:
Essential Functions:
1. Manufacture a wide variety of composite aircraft parts to meet manufacturing specifications, in a team oriented work environment.
2. Demonstrate the ability to meet the requirements of the Manufacturing Competencies at the appropriate level in the Employee Effectiveness Review.
3. Proficient at reading work orders, blueprints, GAC specifications, lofts, sketches and operation sheets to determine sequence of operations.
4. Must be skilled in the use of special tools and equipment to include precision measuring devices such as 6' scale, 1' micrometer, 6' dial caliper.
5. Check all work and ensure a defect free assembly prior to inspection.
6. Maintain and use all logs and records. Example: MIR sheets, DMTs, Crabs, PCOs, DR/DI, etc. 7. Maintain a neat and orderly work area, and comply with all safety regulations.
8. Support Lean activities.
9. Must be able to meet the physical requirements of the position.
10. Must be able to work any shift.

Education and Experience Requirements:
High School graduate or GED. Basic computer skills. Three (3) years of related composite experience. Ability to work with composite resins and materials. Requires ability to read and interpret blueprints. Must be able to use mathematical formulas to solve dimensional problems using fractions and decimals.

The Structures Company is an AA/EOE.
 
Job Number: 283
Job Location: OK
Rate: DOE
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract - Fatigue and Damage Tolerance Engineer

Description:
• Fatigue and Damage tolerance experience preferred on primary and secondary airframe metallic structure • Strong background in classical stress analysis. • Experience with Catia V5 to support stress analysis and drawing release. • Experience with reviewing 2D drawings. • Ability to work independently under limited supervision. • Experience with aircraft modifications and repairs (STC, MRB, or Service) preferred. • Experience with Patran/Nastran is a plus. • Strong preference for engineers that enjoy working in a collaborative environment. • Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.
 
Job Number: 19-143023
Job Location: Southeast
Rate: Up to $80.00 per hour
Per Diem: Yes
Overtime: Possible
Duration: Possible Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Data Integrity Checker

Description:
Location: Savannah, GA
Rate: $53.00/HR
Duration: Long Term Contract

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
- Check 2D and 3D engineering data and 3D models for conformance to company requirements as directed.
- Check parts for fit, form and function to the extent that information is available.
- Must have experience in Product Lifecycle Management (PLM) processes and tools, including checking CATIA V5, SmarTeam, as well as other CAD datasets, in accordance to company requirements as directed.

Checkers are responsible for determining the acceptability of data in the following areas:
- Accuracy and completeness of engineering product definition data, including CAD and PDM data.
- Proper application and compliance with all Engineering and customer drawing requirements.
- Use and understanding of GD & T a must.
- Dimensioning and tolerancing including familiarity with ASME Y14.5.
- Application of best drafting and design practices and procedures.
- Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
- Advise Design personnel regarding company drawing and design practices and procedures.
- Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
- Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
- Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
- Knowledge of company parts list & PdocM, a plus.

Essential Duties and Responsibilities
- Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems.
- Ensures designs meet customer criteria, quality standards and FAA requirements.
- Adheres to budget and project schedules.
- Provides design guidance and feedback to other engineering personnel.
- Other duties as assigned.
- Knowledge of industry design and documentation standards.
- Experience with mechanical assemblies and manufacturing technique design.
- Ability to work independently and cross-functionally.
- Experience in communicating with employees/teams in productive and efficient manner.
- Strong communication and problem-solving skills.

Education and Experience Requirements:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principal Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 10373
Job Location: Savannah, GA
Rate: $53.00/HR
Per Diem: Split Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Checker

Description:
Check 2D and 3D engineering data and 3D models for conformance to requirements as directed. Check parts for fit, form and function to the extent that information is available. Must have experience in Product Lifecycle Management (PLM) processes and tools, including checking CATIA v5, SmarTeam, as well as other CAD datasets, in accordance to Gulfstream requirements as directed.

Checkers are responsible for determining the acceptability of data in the following areas:
• Accuracy and completeness of engineering product definition data, including CAD and PDM data.
• Proper application and compliance with all Engineering and customer drawing requirements.
• Use and understanding of GD & T a must.
• Dimensioning and tolerancing including familiarity with ASME Y14.5.
• Application of best drafting and design practices and procedures.
• Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
• Advise Design personnel regarding GAC drawing and design practices and procedures.
• Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
• Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
• Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
 
Job Number: 24-319
Job Location: Savannah, GA
Rate: $53/hr
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Drafter / NX / BS required CA

Description:
165260
Request number: 5912
Job title: Design Drafter
Number of openings: 1
Position location: Torrance - CA
Employment type: Contract
OT exempt: No
Shift: 1st Education Requirement: BS/BA
Driving on company time?: No
Maximum Hourly Pay Rate: 50
6 months +

Function:
Mechanical Design Engineer
This position is responsible for development of complex electrohydraulic, electromechanical, mechanical, hydro-mechanical and electro-pneumatic components and systems that will become the new products. The incumbent, a fully trained professional, plans and conducts efforts requiring judgment in the independent evaluation, selection, and substantial adaptation and modification of standard engineering techniques, procedures, and criteria. Typically, the Design Engineer devises new approaches for the problems encountered.

Essential job functions:
• Perform conceptual design, analysis, assembly/detail drawing creation in NX, and test planning for complex control hardware used on military aircraft
• Contribute to the development of new product requirements through consulting with customers and sales personnel
• Validate conceptual problem solutions through trade studies and by applying sound engineering principles
• Perform engineering calculations related to sizing, performance, tolerance and assembly
• Be a key contributor to the preparation of technical proposal, cost estimates, and program schedules
• Guide the evolution of conceptual design, technical project planning, detail design, and development testing throughout the program lifecycle
• Support programs with some travel (5-10%) and the participation in presentations to customers
• Represent Moog in a manner consistent with its leading-edge technical reputation
• Create reliable designs through a comprehensive experimental development test program
• Document designs, analyses, and test results with accurate and concise reports

Required skills:
• 6+ years of design and development engineering experience
• Proficient in current versions of NX/UG computer-aided design software
• Self-starter with strong analytical skills and a desire for constant improvement
• Good sense of three-dimensional spatial orientation and knowledge of mechanical hardware design
• Proficient in assembly/detail drawings, GD&T, and dimensional tolerance analysis
• Team-oriented, with the desire to participate in and contribute to a high functioning team


Education:
• Bachelor’s degree in Mechanical or Aerospace Engineering
 
Job Number: MB-5912
Job Location: Torrance, CA
Rate: 50/hr max
Per Diem: no
Duration: 6 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineers – Aircraft Structural Repairs – Permanent - Canada.

Description:
Design Engineers – Aircraft Structural Repairs – Permanent - Canada.

Candidates sought from the US and Canada ,or those with right to live and work in Canada.

Successful candidates will:

·Actively support our client’s design team to ensure customer expectations are met.
·Design generic repairs for aircraft metallic and composite structures.
·Design specific repairs for damages exceeding Aircraft Structural Repair Publication (ASRP) limitations.
·Support operators with technical support on repairability of their aircraft fleet.
·Perform investigation on in-service structural issues affecting reliability. dispatchability and repairability.
·Participate in the design and support of structural modifications.
·Represent Customer Support in internal and external committees.
·Participate in the continuous improvement initiatives of the Customer Support organization. 

Preferred Experience:

·You hold a Bachelors degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of five (5) years in the aerospace industry.
·You have detailed knowledge of CATIA V5 (preferably R19) and Enovia.
·You are comfortable in interrogating aircraft structure repairs.
·You have knowledge of MS Office software (Word, Excel, PowerPoint, etc).
·You have strong, written and spoken, communication skills in English and French.
·You are available for occasional travel on short notice.

Our Client offers good packages to successful candidates, who join them.

Please quote ref JO0000000225 on application.
 
Job Number: JO0000000225
Job Location: Canada
Rate: Negotiable
Start Date: 03/04/2019
Input Date: 11/14/2020
Firm Name: STRONGFIELD TECHNOLOGIES INC
Attention: Graham Bird
Address: 1200 MCGILL COLLEGE AVE STE 1100
City, State: MONTREAL, PQ H3B 4G7
Country: CANADA
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Designer 4 / NX 8.5 FL

Description:
164134
1729 Designer 4 (Job Number: 19003773, 19003777, 19003782)

Number of Openings: 3

Location(s): United States-Florida-Melbourne


Shift: 1st Shift

Target Start Date: Apr 1, 2019

Target End Date: Oct 4, 2019

Pay Rate: $45/hr

Work Schedule: 9/80

Duration of Assignment: Approx 6 months

Seeking experienced Aircraft Structural Designers.

Candidates should have design experience with a focus on metallic structure, wing structure design, machined part

design, sheet metal and knowledge of GD&T. Familiarity with military and industry standards pertaining to material,

process and hardware.

NX 8.5 or later required with PMI knowledge a must.

Candidate should be familiar with drawing/PDP release process utilizing Teamcenter.

(Siemens) Teamcenter Enterprise / Teamcenter Unified familiarity a plus.


Basic Qualifications:

High School Diploma/ GED plus 8 years minimum aircraft metallic structural design experience.

CAD Experience using Siemens NX 8.5 or later.


Preferred Qualifications:

Prior experience with Northrop Grumman products. (E-2, JSTARS etc.)

(Siemens) Teamcenter Enterprise / Teamcenter Unified or similar PLM software.

Design of aircraft wing structure.

Familiarity with Design Review Process.

Microsoft Office Suite.

Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplishing them simultaneously
 
Job Number: MB-1729
Job Location: Melbourne, FL
Rate: 45/hr max
Per Diem: no
Duration: 6 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Doors Engineer

Description:
Candidate must be proficient in Catia V4 and Catia V5 with SmarTeam experience. Must have experience with Door Mechanism Installations, or Aircraft Mechanical Systems Design experience. Previous Aircraft STC modification is desired. Candidate shall not be a Foreign National and must be legally qualified to work on an ITAR project.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
 
Job Number: 24-333
Job Location: Savannah, GA
Rate: $70/hr
Per Diem: YES
Overtime: YES
Duration: 1 YR+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ECS & Pneumatic Subsystems Engineer

Description:
Seeking an ECS & Pneumatic Subsystem Lead Engineer with strong experience enabling him/her to be responsible for all activities related to the design, development, integration, testing and certification of the Environmental Control System (ECS), Cabin Pressurization, Oxygen System, Anti-Ice System and Bleed Air Management for a supersonic business jet. The successful candidate will manage the ECS & Pneumatic systems design and system suppliers, as well as all design and certification activity required.

Duties include, but are not limited to:
• Develop ECS & Pneumatic systems design, architecture and product plans, including qualification and certification plans
• Provide subject matter expert level technical leadership, mentoring and guidance on both practical and theoretical aspects of ECS & Pneumatic systems
• Define requirements for the ECS & Pneumatic systems to ensure compliance with regulations and customer requirements
• Provide validation and verification of ECS & Pneumatic systems requirements
• Perform ECS & Pneumatic systems tests and certification, and provide system and certification documentation
• Manage the ECS & Pneumatic subsystem scheduling, budget, resources and suppliers
• Will be responsible for hiring, developing and leading talent to augment and seamlessly integrate with our world-class team and liaise effectively with our technical support partners.
• The selected candidate will help to define the product development strategy and lead a team of engineers and analysts in that effort.
• She/he will prioritize the allocation of the ECS & Pneumatic resources to meet the milestones of the program schedule, from concept through certification.

Minimum Requirements:
• Must be either a US citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772 and ITAR 120.12
• Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure/confidentiality agreement with current or former employer that would prevent you from performing the duties of the position.
• Minimum of a Bachelor’s Degree in Aerospace, Mechanical Engineering or other relevant Engineering position
• Master’s degree in a technical and/or management specialty preferred
• 10+ years of deep, hands-on experience in ECS systems development, design and testing in Military, Commercial and/or business jet aircraft
• 3+ years of demonstrated experience leading technical resources and teams, both internally and externally, as well as both on-site and off-site
• In-depth and current knowledge of Part 25 regulatory requirements
• Experience and expertise in the development of commercial and/or high-end business jets strongly desired
• Recent experience in developing ECS systems from concept through certification strongly desired
• Must be able to demonstrate a clear understanding, knowledge and ability to define requirements, generate architecture and achieve compliance
 
Job Number: 42-001
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: Possible
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer Military Wire Harness (158)

Description:
*This is a full time, 8 month contract, located in Palmdale, CA*



We are hiring for an Electrical Design Engineer specialized in designing wire harnesses and routings for military, especially aircraft. The candidate will be crating wire assembly and harness diagrams, configuring proper routings, working around issues that arise including integration issues, ECOs and last minute changes to specifications. The role will also require that design be self checked by contractor as no Checkers will be assigned to contract. Environment will require heavy interface with production line technicians, engineers, etc. and working with Termination Aids, routing documents and master sketches.



Required:
*9 years’ experience in electrical military aircraft design 3D software.

*Experience with ANSI/ASME Y14.100 or similar design/drafting standards
*Experience reading and creating electrical drawing schematics for wire harness assemblies
*Per diem split is available for those travelling for this position
*Current Active Secret Clearance (and recently investigated within the last 5 years)
*Ability to work 2nd and weekend shifts if needed (in addition to 1st shift)



Plus:

*Catia V5 knowledge
 
Job Number: 158
Job Location: Palmdale, CA
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer III

Description:
Our client is looking for an Electrical Engineer 3 to work in Tulsa, Oklahoma! Apply today with your most recent resume and if you meet the qualifications a recruiter will be in contact with you!

The ideal candidate for this position will perform the following tasks:
* Design modifications for special mission aircraft. Such modifications typically include the design of electrical power distribution systems, developing electrical loads analysis, wiring diagrams and harness fab drawings.
* Utilize experience with cockpit avionics upgrades, navigation and communications systems and integration to meet FAA or Military flight safety standards.
* Analyze the impact to the host platform that the design changes cause and use this analysis during the design phase to ensure that the overall impact to airworthiness is minimized.
* Effectively communicate as part of a multi-disciplinary team working together to ensure that the aircraft systems contribute to the overall success of the program.
* Knowledge of the airworthiness process is a must and the ability to iterate design approaches with the cognizant airworthiness authorities is critical.

Mandatory Qualifications and Experience:
* 5-8 years BS in Aerospace Engineering, Mechanical Engineering or a related field or 3-6 years MS Degree in a related field or have 10 years relevant experience.
* Must be comfortable working with standard MS Office tools as well as have demonstrated experience on a Solid Modeling CAD system and Product Lifecycle Management system.
* Must be US Citizens and either have or be able to obtain and maintain a Secret level clearance.
* Must have good communication skills and be able to work any shift, weekends and overtime, as required.
* Travel, up to 15%, or as required.

Desired Qualifications and Experience:
* A working knowledge of FEA and experience with NX/TeamCenter is preferred

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 129788
Job Location: Tulsa, OK
Duration: 6 months
Start Date: 03/04/2019
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Power Generation and Distribution Engineer

Description:
• Electrical Power Generation and Distribution Engineer will be responsible for developing the subsystems requirements, architectures, roadmaps, and overall development of the subsystem from concept through certification.
• The candidate must be a subject matter expert in the relevant subsystem and have a thorough technical understanding of development of the subsystem.
• The candidate will be knowledgeable of FAR 25 certification requirements for the subsystem and subsystem components.
• Electrical Power Generation and Distribution Engineer will be responsible for the design of the relevant subsystems of the AS2 supersonic business jet to meet market and certification requirements.
• The successful candidate will have a commanding and fundamental understanding of how to design, analyze, and certify the relevant subsystem and have expert level knowledge of system integration into the aircraft.
• The candidate should be regarded as the technical subject matter expert for the relevant subsystem.

Basic Qualifications:
• BS degree or higher in mechanical/aerospace engineering.
• Minimum of seven years senior level technical experience in Electrical Power Generation and Distribution design and certification required.
• Experience with design and certification of FAR 23 or FAR 25 subsystems required.
• Strong technical, interpersonal, communication, administrative, and presentation skills. Demonstrated leadership in solving technical challenges.
• Significant experience on aircraft design teams, from concept through certification, in a collaborative multi-discipline team environment.
 
Job Number: 42-007
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrophysics Engr/Scien 3

Description:
Electrophysics Engr/Scien 3

Location: Oklahoma City, OK
Duration: 6 months

Description:
OKC Electromagnetic Effects Group is seeking experienced electromagnetic effects engineer. The candidate will mentor and coach lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for Commercial Airplanes (737, 767, 787 and 777) diverse projects. Main area of focus will be to review supplier and partner qualification data to ensure compliance to client and FAA EME requirements and to provide engineering and technical decisions for client Military Aircraft, Military Derivative Aircraft and Rotorcraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, E-6, AC-130U, B-1B, B-2, B-52, V-22, and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft electromagnetics effect on the various platforms.

Assignments may deal with:
- Reviewing supplier and partner qualification data
- Nuclear Hardening analysis and test
- EMI/C analysis and test
- EMSEC/TEMPEST analysis and test
- HIRF/Lightning analysis and test
- RF Co-Site analysis
- Antenna Coupling analysis
- Electrical Power Quality and Load analysis
- Test Automation for aircraft modifications.

Other job responsibilities may include:
- Develops and validates requirements for various communication, sensor, electronic warfare and other electromagnetic systems and components
- Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures
- Develops architectures to integrate systems and components into higher level systems and platforms
- Performs trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around established requirements
- Defines and conducts tests to validate performance of designs to requirements
- Manages appropriate aspects of supplier and partner performance to ensure compliance to requirements
- Provides support to products throughout their lifecycle by developing root-cause analysis of anomalies and other engineering support as requested
- Supports project management by providing work statement, budget, schedule and other required inputs and by reporting project status
- Writes appropriate sections of proposals to support development of new business
- Works under general mentorship.

Skill Code: 62Q-Electromagnetic Compatibility

Education / Experience:
Degree and typical experience in engineering classification: Bachelor's and 5 or more years' experience, Master's degree with 3 or more years' experience or PhD degree with experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.


Please share updated resume at ravi@iconma.com if interested.
 
Job Number: 19-03720
Job Location: Oklahoma City,, OK
Per Diem: Available
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/234-6123
800 Phone: 866/914-9724
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Level 4

Description:
Our client is looking for a level 4 Engineer to work in Savannah, GA! Apply today with your most recent resume and if you meet the qualifications a recruiter will be in contact with you!

The ideal candidate for this position will perform the following tasks:
* Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
* Is consulted extensively by associates and others as a recognized authority within the field
* Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
* Approach to problem solving balances technical product, cost and schedule
* Works without appreciable direction; work is reviewed from a long-range perspective for desired results
* Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
* Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
* Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
* Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
* Knowledgeable with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
* Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
* Design Engineer will be required to liaison with the shop on engineering issues.
* Design assignments Item Installation Analysis, Similarity Analysis and Mount Configuration along with any other required items.
* Design engineer will employ design standards consistent with company standards and accepted design methods are executed under the direction of the Mechanical Engineering Group Head to meet the manufacturing schedule.
* Additional responsibilities are out lined in the job description and as assigned by the Mechanical Engineering Group Head.

Mandatory Qualifications and Experience:
* Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
* Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors.
* Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Desired Qualifications and Experience:
* Mechanical Design in Aircraft Cabin Interiors, CATIA, Smarteam, AutoCAD, Microsoft Project, Excel and Power Point.

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 129972
Job Location: Savannah, GA
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Structural Analysis 4 / 2nd shift / Fighter Aircraft experience preferred / No Clearance Required CA

Description:
164135
1715 Engineer Structural 4 (Job Number: 19000785)

Number of Openings: 1

Location(s): United States-California-Palmdale


Shift: 2nd Shift

Target Start Date: Feb 11, 2019

Target End Date: Feb 7, 2020

Pay Rate: $70 to $73/hr

Work Schedule: 2nd shift - 4/10

Duration of Assignment: Up to 1 year



General:

Analyzes, researches and develops structural engineering specifications involving metals, non-metallic or composite structural materials for product design, or operation of product to include structures, mechanical, hydraulic, electrical and electronics, power plant, armament, heating and ventilating, equipment and maintenance designs. Analyzes damage tolerance, durability, design allowables and structural modeling. Specific structural engineering specialties may include dynamics and loads, stability and stress fatigue and thermal analysis. Tools utilized may include CATIA, IDEAS, ProEngineer and a variety of software applications.



Specific:

Successful candidate will be a member of the F-35 Center Fuselage IPT, supporting the assembly of the Center Fuselage at Palmdale Aircraft Integration Center. Candidate should be experienced in structural analysis methods, including large scale NASTRAN modelling and analysis of metallic and advanced composite structures. Desired skills include familiarity with detailed structural analysis procedures, FEM analysis, PATRAN, layout sizing, structural integrity evaluations, durability and damage tolerance (DaDT) of aircraft structures, material allowables development, acoustic/dynamic evaluations, and weight control. Responsible for liaison support as well as analysis of parts and installation of these parts in the JSF Center Fuselage. Experience should include the development and first-hand assembly line support of aircraft structural parts and assemblies utilizing metallic/composite material (launch vehicle experience considered)


Basic Qualifications:

9 Years with Bachelors in Science; 7 Years with Masters; 4 Years with PhD.


Preferred Qualifications:

Composites, DaDT(Metallics), and MRB support.

Fighter Aircraft experience preferred.
 
Job Number: MB-1715
Job Location: Palmdale, CA
Rate: 73/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FPGA Design/Verification Engineer - Clearance TX

Description:
163983
1333-1 FPGA Design/Verification Engineer

Work Location: Fort Worth, TX
Status: Open

Qty: 2
Desired Start Date: 1/28/2019
End Date: 8/1/2019

Job Description:
Researches, designs, develops, and tests a variety of electronic equipment and systems, including radar and radiation detection equipment; radio, television and other communications equipment and systems; circuitry components; analog and digital computers; and control and test equipment.

This position is for an engineer working in the Fort Worth IFG Hardware Design Team. Job responsibilities will include supporting development of Hardware, Software & Firmware for aircraft.

Responsibilities include:
• Electronic circuit design including Digital and Analog
• Electronic circuit board design, lay out, and routing
• FPGA development, integration, and test
• Electronic hardware testing and troubleshooting
• Support Software Development efforts for target hardware
• Author and Review Hardware Specifications
• Development and review of detailed engineering documents for firmware and hardware release
• Lead and Develop early career team members

Work Location: Fort Worth, TX
Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: JE-1333-1S
Job Location: Fort Worth, TX
Rate: open
Per Diem: no
Duration: 8 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fatigue and Damage Tolerance Engineer

Description:
Fatigue and Damage Tolerance Engineer has experience preferred on primary and secondary airframe metallic structure • Strong background in classical stress analysis. • Experience with Catia V5 to support stress analysis and drawing release. • Experience with reviewing 2D drawings. • Ability to work independently under limited supervision. • Experience with aircraft modifications and repairs (STC, MRB, or Service) preferred. • Experience with Patran/Nastran is a plus. • Strong preference for engineers that enjoy working in a collaborative environment. • Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.





Fatigue and Damage Tolerance Engineer contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area 

Education and Experience Requirements:

Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters, 4 yrs. for PhD in fields applicable to this job. 
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fatigue and Damage Tolerance Engineer

Description:
Location: Savannah, GA
Rate: $75.00 - $80.00/HR
Duration: Long Term Contract

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
- Fatigue and Damage tolerance experience preferred on primary and secondary airframe metallic structure
- Strong background in classical stress analysis.
- Experience with Catia V5 to support stress analysis and drawing release.
- Experience with reviewing 2D drawings.
- Ability to work independently under limited supervision.
- Experience with aircraft modifications and repairs (STC, MRB, or Service) preferred.
- Experience with Patran/Nastran is a plus.
- Strong preference for engineers that enjoy working in a collaborative environment.
- Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) years in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principle Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering related field preferred
The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 10399
Job Location: Savannah, GA
Rate: $75.00 - $80.00/HR
Per Diem: Split Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
We are seeking Flight Test Engineers to join us in Moses Lake, WA to support an exciting new aircraft project. The ideal candidate in this position will be involved in a range of airplane flight test operations including but not limited to:

Support engineering with test plan creation.
Discuss, write and review test cards and test hazard analysis
Support and/or lead test preparation activities, test execution, post-test activities
Support and/or lead pre and post flight briefings.
Monitor live flight data, either via telemetry or onboard flight test aircraft
Process, analyze, and draw conclusions from post flight data.
Make assessments to ensure safety of flight determination.
Document flight test design problems for long term fix.
Generate and review appropriate restrictions/ limitations documentation.
Update monitoring screens for specific testing and/or restriction monitoring.


Requirements


5+ years relevant work experience related to experimental flight test operations.
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
Strong ability to analyze results
Communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related.
 
Job Location: Moses Lake, WA
Per Diem: Possible
Overtime: Yes
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flutter & Dynamic Loads Engineer

Description:
Location: Savannah, GA
Rate: $71.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

As a Contract Engineer in Flutter & Dynamic Loads, you will:
- Provide solutions for aircraft flutter and vibration problems
- Analyze aircraft structural dynamic response and develop load distributions for gust, landing and taxi conditions.
- Analyze aircraft for flutter and determine flutter margins.

What you'll bring to the team:
- Knowledge of aircraft aero elasticity principles and concepts
- Good general knowledge of FAR/EASA Part 25 requirements
- Experience in structural dynamics modeling
- Experience with MSC Nastran and Patran or a comparable application
- Experience with ground tests such as ground vibration tests or landing gear drop tests
- Experience with flutter flight testing
- Experience with dynamic analyses such as engine fan blade out or aircraft crash landing is a plus
- Experience with aero servo elasticity is a plus

What the Loads & Dynamics team does:
- Creating and delivering a world class aviation experience
- Contributing to the certification of world class business jet aircraft

Education:
- Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
- See Other Requirements in Job Description.
- 5 years in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
- Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
 
Job Number: 10461
Job Location: Savannah, GA
Rate: $71.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fuel Cell Mechanic URGENT URGENT / no clearance / 3 years’ aircraft fuel cell experience required SC

Description:
164388
Job Title: Fuel Cell Mechanic

Work Site Address: Greenville, SC 29605
Max Pay Rate: 25-29/hr DOE
Start Date: ASAP
End Date: 6 months
Position Type: Contract

3 years’ aircraft fuel cell experience required

Job Summary:
Performs removal, installation, and inspection functions of fuel cells in addition to assembly, and installation of components such as fuel lines, hardware, and fittings on various aircraft. Analyzes various aircraft sealing, structural, and assembly drawings, to detect seal level deficiencies on aircraft. Diagnoses results of leak test to detect drawing, specification, structural and assembly sealing errors. Recommends corrective action necessary to correct deficiencies. Performs disassembly and teardown operations of aircraft fuel systems and related components. Removes fuel cells and components from aircraft, following specific procedures and techniques. Prepares cavity for installation of fuel cells and components. Installs fuel cells and components, following specific procedures and techniques. Uses appropriate pressure test equipment, and make repairs as required. Works from operations shop orders, diagrams, blueprints, engineering orders, mil-specs and verbal instructions. Work with jigs, fixtures, and various tooling, as operations requires. In order to perform the essential functions of this job, the employee is regularly required to perform confined space entry into C-130 and P-3 aircraft fuel tanks, the opening of which is approximately 10” x 16”.

Qualifications and Education Requirements
Must be able to read and speak English. Comprehend documents such as safety rules, operating maintenance instructions and procedure manuals.

Mission essential functions and other duties may be assigned as required.

Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company.

• Candidate must possess 3 years aircraft fuel cell experience.
• Candidate must provide tools in accordance with minimum tool listing, shadowed and etched per company policy/procedures.
• Candidate must have the ability to become confined space certified for entry into aircraft fuel tanks with an opening of 10”x16”.
• Candidate must comply with FAA DOT medical requirements for employee performing a safety sensitive function.

Requires respirator physical, FAA DOT medical and the ability to become confined space certified. Must be able to become confined space certified for entry into P-3 and/or C-130 Fuel Cells
 
Job Number: LM-003
Job Location: Greenville, SC
Rate: 25-29/hr DOE
Per Diem: no
Duration: 6 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fuel System Designer (Entry Level)

Description:
General Summary:

The Entry-Level Engineer Fuel System Designer is responsible for the design of the fuel system installations and related system integration. This designer will join an established design team to execute design changes for the aircraft related to product improvements, cost savings, weight savings and other minor and major change projects. Although the position will reside in the fuel systems engineering team, the role will also involve working on propulsion system design activities as required by the overall team workload.

Duties and Responsibilities:
• The primary role of this position will be to create design packages that include 3-D models (in Catia) as well as 2-D drawings. This role will encompass the execution of the design from the concept phase through to drawing release
• The ideal candidate should be able to work well with the senior designers within the team but also be able to be self-sufficient and able to manage task execution to ensure on-time and on-target completion

Education, Work Experience, Certification and/or Licensure:
• Bachelors degree in an engineering related discipline
• Minimum of 3 years of previous design experience

Knowledge, Skills and Abilities:
• Experience with Catia V5
• Familiar with Microsoft Office Products
• Familiar with FAR Part 23 or Part 25
• Familiar with Industry standards

The Structures Company is an AA/EOE.
 
Job Number: 257
Job Location: NC
Rate: $35-$50/Hr. **DOE**
Per Diem: Yes
Overtime: Yes
Duration: 12+ Months
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fuel Systems Engineer

Description:
• Responsible for developing the subsystems requirements, architectures, roadmaps, and overall development of the subsystem from concept through certification.
• The candidate must be a subject matter expert in the relevant subsystem and have a thorough technical understanding of development of the subsystem.
• The candidate will be knowledgeable of FAR 25 certification requirements for the subsystem and subsystem components.
• Fuel Systems Engineer will be responsible for the design of the relevant subsystems of the AS2 supersonic business jet to meet market and certification requirements.
• The successful candidate will have a commanding and fundamental understanding of how to design, analyze, and certify the relevant subsystem and have expert level knowledge of system integration into the aircraft.
• The candidate should be regarded as the technical subject matter expert for the relevant subsystem.

Basic Qualifications:
• BS degree or higher in mechanical/aerospace engineering.
• Minimum of seven years senior level technical experience in Fuel Systems design and certification required.
• Experience with design and certification of FAR 23 or FAR 25 subsystems required.
• Strong technical, interpersonal, communication, administrative, and presentation skills. Demonstrated leadership in solving technical challenges.
• Significant experience on aircraft design teams, from concept through certification, in a collaborative multi-discipline team environment.
 
Job Number: 42-008
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Handling Qualities and Control Law Lead Engineer

Description:
Handling Qualities and Control Law Lead Engineer
Location: Fort Worth, TX (76118)
12-18 Months

Tasks/Requirements:
- Creating analytical and simulation models of the designs
- Aircraft Stability and Control Design and Analysis
- Conducting wind tunnel tests, reducing data, and incorporating results into simulation math model
- Developing aircraft Control Laws and integrating these into flight simulation programs
- Linear and non-linear analysis of flight control systems
- Analyzing the aircraft handling qualities and comparing results to aircraft requirements and specifications
- Conducting aircraft flight tests of model and full-scale designs
- Interface with other functions and management on the program

Familiarity with the following is preferred:
· Wind tunnel testing
. 6 degree of freedom simulation models
. Model-based systems engineering
· MathWorks MATLAB / Simulink with Stateflow and Embedded Coder
· ADS-33 and other Handling Qualities specifications
. Aircraft Parameter Identification
. Control Law Optimization
· Aircraft flight test
· Experience with Enovia, DOORS, and Serena Dimensions
· Flight control system development and testing in a systems integration lab
· 14 CFR Part 27 and Part 29 for commercial rotorcraft certification



____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 54731
Job Location: Fort Worth, TX
Rate: Negotiable
Per Diem: Possible
Overtime: Possible
Duration: 12+ months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Human Performance Analyst and Investigator

Description:
Currently looking for an experienced Human Performance Analyst to fill an opening with a company located in Moses Lake, WA. Interested candidates should have a Bachelor’s Degree in Safety, Human Factors, Risk Management, Aviation Maintenance, Aeronautics, or a related field, along with at least 2 years’ experience after earning a bachelor’s degree, working directly as a specialist or instructor of human factors or human performance or flight physiology.

Responsibilities of the Human Performance Analyst

Serve as the safety team’s expert on human performance, team dynamics, and flight physiology.
Advise aircrew, dispatchers, test managers, and the Flight Test Safety Officer on scientific aspects of human psychology, physiology, ergonomics, and anthropometrics.
Provide human performance insights to help the Flight Test Safety Officer prepare Test Hazard Analyses, Safety Review Boards, and related functions.
Assess proposed flight manual changes and procedures for adherence to best practices in human performance.
Work with the Flight Test Safety Officer to develop a program of non-punitive observation of flight simulations.
Perform the observations, then debrief the flight crew and trend the data collected in a fashion similar to Line Operations Safety Assessments (LOSAs), but limited to the simulator.
Carefully review event reports and newly found hazards for human elements and how they impact risk and potential mitigations.
Develop and administer psychographic surveys to determine safety cultures and climates present in different parts of the organization, trend how they change over time, and analyze possible causes responsible for the changes.
Establish, adjust, and track Safety Performance Indicators (SPIs) and Allowable Levels of Safety Performance (ALoSP) associated with human performance, as part of SMS Safety Assurance requirements.
Create original and customized courseware in CRM/TEM and human performance for the unique intercultural employees and then coordinate with other members of the safety team to facilitate and instruct using innovative methods that use the most modern education and training technology.
Provide expert insights on the psychological barriers to change as new safety initiatives are fielded.
Create a system for tracking the currency of aircrew flight physiology training, to include altitude chamber initial and recurrent training.
Perform ergonomic assessments of workplace settings, ranging from aircraft seating to office functions conducive to repetitive stress disorder.
Work shifts as the “on-call” safety representative for time-sensitive safety issues, to include occasionally being on-call after normal business hours.
Assist and/or lead incident investigations and participate in management review of all serious incidents.
Develops and implements the human performance elements of the Risk Management (RM) program and instructs strategic and real-time RM principles to employees and executive staff.
Participate in annual budget and requirements development process for the safety team.


Requirements
Bachelor’s Degree in Safety, Human Factors, Risk Management, Aviation Maintenance, Aeronautics, or a related field.
At least 2 years’ experience after earning a bachelor’s degree, working directly as a specialist or instructor of human factors or human performance or flight physiology.
Current driver's license and current civilian passport or ability to obtain passport.
Ability to pass drug screening test.
Respectful of other national and professional cultures and possessing a willingness to learn about other cultures.
Ability to use computers and associated software programs, such as MS Word, PowerPoint, and Excel.
Ability to integrate smoothly into a fast-paced technological environment while remaining calm in situations where others may be overwhelmed.
Ability to field and prioritize a multitude of near simultaneous request from different members of a team while remaining courteous, positive, and effective.
Strong analytical skills with demonstrated problem solving ability.
Excellent written and verbal communication skills for presenting safety and human factors information.
Excellent interpersonal skills and intercultural sensitivity to work effectively with all levels of an international organization.
Preferred

Master’s degree in Safety, Human Factors, Risk Management, Aviation Maintenance, Aeronautics, or a related field.
At least 2 years’ experience after earning a master’s degree, working directly as a specialist or instructor of human factors or human performance or flight physiology.
An understanding of the ICAO or FAA SMS organizing framework.
Experience conducting human factors analyses, such as task analyses and human error analyses, associated with accidents, incidents, or voluntary hazard reporting such as the Aviation Safety Action Program (ASAP).
 
Job Location: Moses Lake, WA
Per Diem: Possible
Overtime: Yes
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Design Engineer

Description:
Our client is looking for an Industrial Design Engineer to work in Wichita, Kansas! Apply today with your most recent resume and if you meet the qualifications a recruiter will be in contact with you!

The ideal candidate for this position will perform the following tasks:
* Must be creative during the early phase of the Industrial Design Process, must have the ability to generate multiple concepts and support / lead the design team during the brainstorming, concept development phase.
* Uses design research, ergonomics and 3D models to define design intent for both interior and exterior aircraft design.
* Works as part of a multi-function design team, including industrial designers, individuals from other technical disciplines, and suppliers in the development of product design.
* Collaborates with Customers, Senior Management and other Cross Functional Teams. (SLT, AD Engineering, Int. Engineering, Marketing, Sales, Development Shop).
* Mentors design team members during the design process, shares skills and be open to training new members as needed. Will fosters a team environment and a positive work culture.
* Supports department budgets and labor forecasting. Visits University Design programs and mentors design Intern students. Help build our future design teams.
* Understands the design strategy with-in Textron Aviation, helps create new design / innovation with-in the interior organization.

Mandatory Qualifications and Experience:
* Bachelor’s Degree- Industrial Design or Equivalent
* 13-18 Years- Industrial Design experience working for an OEM or Consultancy.
* Background with Software- Alias, Catia, Adobe creative suite, KeyShot, 3ds Max
* Understanding of prototyping methods and tools associated
* Knowledge of materials and manufacturing process
* Previous experience working with Cross Functional Teams
* Expert knowledge of 3D modeling, complete knowledge of manufacturing methods, material properties, human factors & engineering disciplines.
* Has strong knowledge of marketing & branding.
* Experience with: Autodesk Alias Surface 3D, Rhinoceros 3D, Adobe Photoshop, KeyShot 3D rendering software, 2D sketch ability

Desired Qualifications and Experience:
* Adobe Illustrator
* HTC Vive VR Headset
* 3D Studio Max
* Catia V6

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 129891
Job Location: Wichita, KS
Duration: 6 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Interior Design Engineer

Description:
Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Unique Skills:
• Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions Engineering.
• Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
• Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
• Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
• Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
• Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
• Design Engineer will be required to liaison with the shop on engineering issues.
• Design assignments include but are not limited to: -Item Installation Analysis and Similarity Analysis
• Configuration Analysis Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


Principle Duties and Responsibilities:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
• Perform other duties as assigned.
• Advanced degree in engineering, or related curriculum preferred
• The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 24-335
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Interior Design Engineer

Description:
Unique Skills:
-Aircraft Cabin Interiors - Mech Design -Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations. -Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis. -Knowledgeable with Part 25 aircraft requirements and some familiarity with Part 135 requirements. -Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam. Design Engineer will be required to liaison with the shop on engineering issues. -Design assignments Item Installation Analysis, Similarity Analysis and Mount Configuration along with any other required items. Design engineer will employ design standards consistent with company standards and accepted design methods are executed under the direction of the Mechanical Engineering Group Head to meet the manufacturing schedule. -Additional responsibilities are out lined in the job description and as assigned by the Mechanical Engineering Manager. -Preferred skills: Mechanical Design in Aircraft Cabin Interiors, CATIA, Smarteam, AutoCAD, Microsoft Project, Excel and Power Point.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred

The Structures Company is an AA/EOE.
 
Job Number: 285
Job Location: GA
Rate: DOE
Per Diem: Yes
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Interior Design Engineer

Description:
Interior Design Engineer for Aircraft Cabin Interiors in Completions Engineering. Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations. -Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis. -Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements. -Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam. -Design Engineer will be required to liaison with the shop on engineering issues. Design assignments include but are not limited to: -Item Installation Analysis -Similarity Analysis -Configuration Analysis Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs. in specific technical discipline or fifteen (15) yrs. broad end experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Interior Design Engineer

Description:
Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions Engineering.

Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.

Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.

-Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.

-Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.

-Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.

-Design Engineer will be required to liaison with the shop on engineering issues.

Design assignments include but are not limited to:

-Item Installation Analysis

-Similarity Analysis

-Configuration Analysis

Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.
 
Job Number: 143870
Job Location: Savannah, GA
Rate: 58.00-63.00
Per Diem: yes
Overtime: yes
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: P O BOX 965280
2886 SANDY PLAINS RD

City, State: MARIETTA, GA 30066
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
- Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions Engineering.
- Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
- Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
- Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
- Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
- Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
- Design Engineer will be required to liaison with the shop on engineering issues.

Design assignments include but are not limited to:
- Item Installation Analysis
- Similarity Analysis
- Configuration Analysis Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred
The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 10564
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Landing Gear Engineer

Description:
• Landing Gear Engineer will be responsible for developing the subsystems requirements, architectures, roadmaps, and overall development of the subsystem from concept through certification.
• The candidate must be a subject matter expert in the relevant subsystem and have a thorough technical understanding of development of the subsystem.
• The candidate will be knowledgeable of FAR 25 certification requirements for the subsystem and subsystem components.
• Landing Gear Engineer will be responsible for the design of the relevant subsystems of the AS2 supersonic business jet to meet market and certification requirements.
• The successful candidate will have a commanding and fundamental understanding of how to design, analyze, and certify the relevant subsystem and have expert level knowledge of system integration into the aircraft.
• The candidate should be regarded as the technical subject matter expert for the relevant subsystem.

Basic Qualifications:
• BS degree or higher in mechanical/aerospace engineering.
• Minimum of seven years senior level technical experience in Landing Gear design and certification required.
• Experience with design and certification of FAR 23 or FAR 25 subsystems required.
• Strong technical, interpersonal, communication, administrative, and presentation skills. Demonstrated leadership in solving technical challenges.
• Significant experience on aircraft design teams, from concept through certification, in a collaborative multi-discipline team environment.
 
Job Number: 42-009
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Landing Gear System Design Engineer

Description:
General Summary:
Design Engineer responsible for the conceptual design and production engineering of Aircraft Landing Gear and Hydraulic Systems. The candidate will be responsible for conceptual layout, detailed design and aircraft production & in-service design and modification.

Duties and Responsibilities:
1. Generates Engineering Models and Drawings utilizing CATIA Version 5.
2. Performs trade studies to identify optimal engineering solution.
3. Collaborates with the Integrated Product Team to resolve cross functional issues.
4. Reviews work performed by others and ensure work is to the highest standard.
5. Implements Industry best engineering practices (design for manufacturing, design for reliability and design for maintainability).
6. Have the ability to understand and apply certification requirements.
7. Implement design solutions optimized for cost and weight.
8. Manages task execution to ensure on-time and on-target completion.
9. Utilizes drafting and Geometrical Dimensioning &Tolerancing knowledge to optimize part design for cost and functionality.
10. Searches for problem root cause and develop corrective action plans and solutions.
11. Serves as a primary interface within the Landing Gear and Hydraulic Systems group to ensure effective communication, coordination, and timely completion of project milestones.
12. Leads or participates in design / development reviews with management and internal customers. The candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience.

Education, Work Experience, Certification and/or Licensure:

1. BS in Mechanical Engineering with a minimum of 10 years directly related aviation engineering experience designing mechanical systems; experience can be used in lieu of education
2. Some Travel will be required

Knowledge, Skills and Abilities:
1. Proficient in use of CATIA Version 5.
2. Advanced knowledge of drafting rules.
3. Advanced knowledge of Geometrical Dimensioning and Tolerancing.
4. Proficient in Microsoft Office Products.
5. Use of Team Center.
6. Familiar with FAR Part 23 or Part 25.
7. Functional knowledge of SAP.

The Structures Company is an AA/EOE.
 
Job Number: 259
Job Location: NC
Per Diem: Yes
Overtime: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Liaison Engineer

Description:
Location: Savannah, GA
Rate: $54.67/HR
Duration: Long Term Contract

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
- The primary function of Aircraft Completions Liaison Engineering department is to support operations aircraft by coordinating all engineering efforts required to facilitate the installation of the aircraft interior.
- Actively develop engineering product improvements.
- The Liaison engineer shall support aircraft customization requests including design, fabrication, testing, and final delivery.
- Additional responsibilities include developing alternative design approaches, including establishing design verification & validation models specification of applicable test, conductance of test to show compliance with applicable regulations.
- Successful applicant will be self-motivated, and able to develop an approach from initial procedure review, data processing, task optimization, and specifically communication of technical information to a wide range of audiences, meeting customer needs.
- Candidates should have a willingness to work off-shift and weekend hours on occasion when program milestones require.
- Applicants must be willing to constantly review existing processes and methods for continuous improvement.
- Ideal candidates for the Completions Liaison Engineer will have mechanical engineering and previous liaison engineering experience with cabin interiors and systems.
- Ensure aircraft schedule and budgets are met to support schedule for each aircraft's Supplemental Type Certification (STC) for on-time customer delivery.
- Commodity support to include but not limited to: Seats, Galley, Lavatories, Liners, Water System, and Mechanical Systems

Education and Experience Requirements:
- Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
- See Other Requirements in Job Description.
- 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
- Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principal Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 10303
Job Location: Savannah, GA
Rate: $54.67/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Liaison Engineer - Interiors

Description:
Liaison engineer shall support aircraft customization requests including design, fabrication, testing, and final delivery. Additional responsibilities include developing alternative design approaches, including establishing design verification & validation models specification of applicable test, conductance of test to show compliance with applicable regulations. Successful applicant will be self-motivated, and able to develop an approach from initial procedure review, data processing, task optimization, and specifically communication of technical information to a wide range of audiences, meeting customer needs. Candidates should have a willingness to work off-shift and weekend hours on occasion when program milestones require. Applicants must be willing to constantly review existing processes and methods for continuous improvement. Ideal candidates for the Completions Liaison Engineer will have mechanical engineering and previous liaison engineering experience with cabin interiors and systems. Ensure aircraft schedule and budgets are met to support schedule for each aircraft's Supplemental Type Certification (STC) for on-time customer delivery. Commodity support to include but not limited to: -Seats -Galley -Lavs -Liners -Water System -Mechanical Systems
 
Job Number: 19-142471
Job Location: Southeast
Rate: $54.50
Per Diem: Yes
Overtime: Possible
Duration: Possible Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Logistics Management Analyst

Description:
Logistics Management Analyst
Location: Fort Worth, TX
Pay Rate: $39.41
Duration: 1 Year
Shift: First
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**

Execute the efficient flow of military aircraft parts, components and support equipment around the globe within a diverse team environment.
Desired knowledge, skills and expertise:
- Export Licensing, Documentation & Logistics
- EAR/ITAR Jurisdiction Determination,
- Schedule B / Harmonized Tariff System (HTS) classification.
- Federal Trade Regulations (FTR) including AES / ACE Electronic Export Information submittals.
- International Incoterms, exporter of record and importer of record requirements
- Global Trade Services (GTS) and SAP software.
- IATA and DOT Dangerous Goods Regulations
- Customs Clearance Process awareness

Flexible working hours required
SAP - 1+ years experience preferred
 
Job Number: 10490
Job Location: Fort Worth, TX
Rate: 39.41
Per Diem: Split Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Logistics Management Analyst TX

Description:
163802
1296-1 Logistics Management Analyst
Work Location: Fort Worth, TX
Status: Open

Qty: 1
Desired Start Date: 1/29/2019
End Date: 1/28/2020

Job Description:
Execute the efficient flow of military aircraft parts, components and support equipment around the globe within a diverse team environment.
Desired knowledge, skills and expertise:
- Export Licensing, Documentation & Logistics
- EAR/ITAR Jurisdiction Determination,
- Schedule B / Harmonized Tariff System (HTS) classification.
- Federal Trade Regulations (FTR) including AES / ACE Electronic Export Information submittals.
- International Incoterms, exporter of record and importer of record requirements
- Global Trade Services (GTS) and SAP software.
- IATA and DOT Dangerous Goods Regulations
- Customs Clearance Process awareness

**Flexible working hours required

Region: Fort Worth, TX
Level: Level 2: BS+4-8 YRS or MS+2-6 YRS
Pay Rate: $38.00 Hourly

Experience
Software Skills SAP No 1
 
Job Number: JE-1296-1
Job Location: Fort Worth, TX
Rate: 38/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MP&P Engineer

Description:
Job Description:
Coordinates definition of complex requirements for processes used in the manufacture of products. Establishes standards for specifications and other documents to manage the deployment of automated processes. Promotes standardization across the Company. Leads evaluation of emerging technologies for potential application to business needs. Establishes standards to qualify new materials, parts and processes to meet requirements. Leads integration of new technologies. Coordinates complex analysis to determine reasons for failures of materials, parts or processes. Coordinates broadly based corrective and preventive actions. Leads design, development and qualification of sophisticated production systems to satisfy user requirements. Works under consultative direction. Responsible for implementing automated equipment and processes for use on airplane composite wing assembly. Job responsibilities will include the daily production support of equipment and processes on 3rd shift plus weekend days as needed with a focus on automated drilling and fastening in CFRP, Al, & Ti, and supporting operations/processes.

Skills:
Aircraft structures assembly
Assembly Process
Drilling
Interpret schematics, assembly drawings, technical manuals
Robotics

Education: Bachelor's degree with 14 or more years' experience, Master's degree with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
 
Job Number: MPP2018
Job Location: Everett, WA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6 mon
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Engineer

Description:
Seeking an experienced, highly motivated Material Review Board (MRB) Engineer. The primary task of this person will be to review manufacturing non-conformances and establish appropriate dispositions for these parts and assemblies. Competency in first order design and analysis principles is a must. Ability to utilize CATIA V5 is desired. Experience with various composite material systems is desired.

Qualifications:
• Knowledge of air vehicle systems, systems integration, engineering design, the drawing release process, and subsystems/component qualification
• Working knowledge and experience integrating various mechanical systems into a composite aircraft.
• Familiarity with composite fabrication processes
• Review and provide engineering technical disposition of non-conformance notifications related to metallic and composite parts/assemblies
• Skilled in “equivalent strength” principles
• Participation in product Corrective Action Board (CAR) reviews


Requirements
• B.S. degree in Mechanical, Aerospace, or similar engineering discipline is required
• At least 5 years of relevant industry experience
• Experience with CATIA V5 strongly preferred. SOLIDWORKS or equivalent will be considered in lieu of CATIA.
• Experienced design (broad based aircraft experience) with knowledge of design manufacturing tolerances for production of components using GD&T
• Experience with Product Lifecycle Management tools (PLM software), Requirements management tools and configuration management
• Excellent verbal and written communication, excellent computer skills including Microsoft Word, Excel, PowerPoint, and Matlab
• Knowledge and experience with AS9100 a plus
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, DO-160, military (MIL-STD-810) or NASA are highly desired
• Experience with manufacturing based ERP systems a plus
• Strong team player and ability to work independently with excellent organizational and problem-solving skills
• Composite and metal design experience preferred
• Understanding of MRB requirements & procedures
• Extensive working knowledge of engineering drawings / requirements
• NDT/Visual non-conformance disposition expertise
• Experience with control & segregation requirements for non-conforming material
• Familiarization with records accuracy & completeness (including data codes)
• Ability to facilitate inadequate cause & corrective action resolutions
• Familiarization with rework vs accept disposition risk assessments
• Familiarization with final dispositions & re-submit codes
• Experience should include creation of engineering dispositions for non-conformances for pressurized and non
• pressurized metallic and non-metallic structures (fuselage, wing, empennage)
• Experience should be in a production and/or schedule-driven environment
• Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment
• Strong written/verbal communication and interpersonal skills
• Typically a 9-10 hour work day, with some scheduled weekend support required

The Structures Company is an AA/EOE.
 
Job Number: 263
Job Location: CA
Rate: Up to $65/Hr. **DOE**
Per Diem: Yes
Duration: 9+ Months
Start Date: ASAP
Input Date: 09/20/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Engineer (9 positions left, Tulsa, OK)

Description:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Experience/Education
• Bachelor’s degree in aerospace or mechanical engineering.

Unique skills/Experience
• Minimum 7 years dedicated structures MRB Engineering experience at a recognized aerospace manufacturer.
• Experience should include creation and justification of engineering dispositions for nonconformances of composite and metallic, pressurized and non-pressurized aircraft structures.
• Composite experience should include fiberglass, carbon/epoxy, laminate/sandwich assemblies.
• Familiarity with results of composite NDI/NDT methods required.
• Experience should be in a Production and/or schedule-driven environment.
• Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
• Strong written/verbal communication and interpersonal skills.
• Must be computer literate (such as, but not limited to: Catia V5, SAP, Solumina, Smarteam, Word, Excel)
• Typically a 40 hr work week, with some week/weekend OT a possibility.

Essential Functions
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Acts as liaison with representatives outside of the assigned group/area

aircraft aerospace
 
Job Number: 24-303
Job Location: Tulsa, OK
Rate: $64-$67
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Maintenance Engineer

Description:
Currently looking for an experienced Maintenance Engineer to fill an opening with a company located in Seattle, WA. Interested candidates should have a Bachelor of Science or higher from ABET-accredited school or be a former licensed A/P mechanic who has extensive experience working in an engineering environment with maintenance or operations engineers.

Responsibilities of the Maintenance Engineer
Adapts a maintenance program generated by MSG-3 to flight test fleet, by analyzing changing aircraft configurations and ongoing operational data.
Coordinating across multiple sites and engineering departments at OEM.


Requirements
BS or higher degree from ABET-accredited school preferred, or former licensed A/P mechanic who has extensive experience working in an engineering environment with maintenance or operations engineers.
Background in maintenance or operations of Part 25 airplanes with an OEM or for a Part 91/121/135 operator.
Any direct experience of certification flight testing to Part 25 would be a plus.
Familiarity with MSG-3 analysis.
Hangar/Ramp and Flight test experience preferred.
 
Job Location: Seattle, WA
Per Diem: Possible
Overtime: Yes
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Adnan Salaka
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $52.50/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
Candidates must have experience with Catia V5. Experience with Solumina and SAP is preferred. Candidates must possess proven knowledge of aircraft systems and structural assemblies/installations.

Other Requirements:
1. Proven knowledge of Lean and/or Six Sigma principles.
2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
4. Lean Six Sigma Greenbelt Certification or higher preferred.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.
 
Job Number: 10122
Job Location: Savannah, GA
Rate: $52.50/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mass Properties

Description:
Minimum 5 years aircraft mass properties experience in product development environment. Strong weight control skills including influencing, accounting, reporting, measuring, risk and opportunity identification for structure and systems. Proficient in weight calculation from engineering drawings and catia v4/v5 models. Experienced in database maintenance. Familiarity with Gulfstream products and design processes desired. Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job. Job Description • Perform mass properties analysis for production aircraft or production aircraft modified for Special Mission applications. • Update a mass properties accounting database with detail part weight, center of gravity, and inertias. • Perform actual weight and balance measurement of detail parts, assemblies and full aircraft. • Prepare aircraft weight & balance documentation for flight and delivery (W&B Handbook, empty weight, W&B for flight, equipment list) • Track and status structural or system weight versus target weights. • Promote weight reduction opportunities to the responsible structural designers, system designers or stress engineers. • Provide and report to management on Aircraft Weight and Balance status • Coordinate activities to insure weight targets/goals are met What you'll bring to the team: • Apply your education as an Aeronautical, Aerospace, Electrical, Systems, or Mechanical engineer to provide quality mass properties analysis. • Apply people skills to provide optimum lightweight design concepts while working with design team. • Experience with CATIA and SmarTeam is preferred.
 
Job Number: 19-143213
Job Location: Southeast
Rate: $65.00 per hour
Per Diem: Split
Overtime: Possible
Duration: Possible Year
Start Date: 2 Weeks upon confirmation
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mass Properties Engineer

Description:
The Mass Properties Engineer will support the CH-53K Program. The ideal candidate will perform drawing review and analysis to support Mass Properties updates to the database. They will provide support of other miscellaneous Mass Properties tasks including Chart A Development, Aircraft Weighing, Trade Study Analysis and ECP updates.

This position requires the candidate to have an understanding and working knowledge of SAWE RP 7 and 8 as well as strong interpersonal skills and a minimum of 10 years Mass Properties experience. The candidate must be proficient in use of MS Excel and Word and have experience with CATIA V5.
 
Job Number: 1910099481
Job Location: Shelton, CT
Per Diem: split
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mass Properties Engineer

Description:
Location: Savannah, GA
Rate: $65.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
- Minimum 5 years aircraft mass properties experience in product development environment.
- Strong weight control skills including influencing, accounting, reporting, measuring, risk and opportunity identification for structure and systems.
- Proficient in weight calculation from engineering drawings and Catia v4/v5 models.
- Experienced in database maintenance.
- Familiarity with Gulfstream products and design processes desired.

Education:
- Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
- See Other Requirements in Job Description.
- 5 years in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
- Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Job Description:
- Perform mass properties analysis for production aircraft or production aircraft modified for Special Mission applications.
- Update a mass properties accounting database with detail part weight, center of gravity, and inertias.
- Perform actual weight and balance measurement of detail parts, assemblies and full aircraft.
- Prepare aircraft weight & balance documentation for flight and delivery (W&B Handbook, empty weight, W&B for flight, equipment list)
- Track and status structural or system weight versus target weights.
- Promote weight reduction opportunities to the responsible structural designers, system designers or stress engineers.
- Provide and report to management on Aircraft Weight and Balance status
- Coordinate activities to insure weight targets/goals are met

What you'll bring to the team:
- Apply your education as an Aeronautical, Aerospace, Electrical, Systems, or Mechanical engineer to provide quality mass properties analysis.
- Apply people skills to provide optimum lightweight design concepts while working with design team.
- Experience with CATIA and SmarTeam is preferred.
 
Job Number: 10462
Job Location: Savannah, GA
Rate: $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mass Properties Engineer

Description:
The successful candidate shall have experience with Weight and Balance for outfitting of an airplane. Candidate shall have knowledge of the applicable regulations governing weight and balance operations. Experience working within an ODA environment a plus. Experience working with sales a plus. Candidate must have excellent written and verbal skills.

Responsibilities
• Perform mass properties analysis for production aircraft or production aircraft modified for Special Mission applications.
• Update a mass properties accounting database with detail part weight, center of gravity, and inertias.
• Perform actual weight and balance measurement of detail parts, assemblies and full aircraft.
• Prepare aircraft weight & balance documentation for flight and delivery (W&B Handbook, empty weight, W&B for flight, equipment list)
• Track and status structural or system weight versus target weights.
• Promote weight reduction opportunities to the responsible structural designers, system designers or stress engineers.
• Provide and report to management on Aircraft Weight and Balance status
• Coordinate activities to insure weight targets/goals are met

Experience Requirement
• Minimum 5 years aircraft mass properties experience in product development environment.
• Strong weight control skills including influencing, accounting, reporting, measuring, risk and opportunity identification for structure and systems.
• Proficient in weight calculation from engineering drawings and Catia v4/v5 models.
• Experienced in database maintenance.
• Familiarity with Gulfstream products and design processes desired.
 
Job Number: 24-326
Job Location: Savannah, GA
Rate: $65
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Master Technical Training Instructor

Description:
Location: Savannah, GA
Rate: $39.00 - $43.00/HR
Duration: Long Term Contract
Shift: 4x10
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
1. Aircraft manufacturing and Repair Station knowledge and or experience required.
2. Sheet metal and structures experience required.
3. Looking for candidates with classroom and hands-on experience. Example: hands-on experience with structures, sheetmetal, riveting, etc.
4. Company Aircraft knowledge preferred.

Education and Experience Requirements:
1. Bachelor's degree preferred or equivalent combination of education and experience.
2. Five to eight years experience in aviation industry, including relative Company experience.
3. Three to five years experience in training related area.
4. See Other Requirements in Job Description.

Position Purpose:
1. Under minimum supervision, research, assist in the development, organize and deliver training curriculum.
2. Act as an internal consultant on training issues in areas of expertise.
3. Support training as assigned at all company and Flight Safety facilities.
4. Support Lead Training Instructors and mentor other training instructors as required.

Principal Duties and Responsibilities:
Essential Functions:
1. Conduct classroom and practical training as requested at all company and Flight Safety facilities. Training may include certification training for engine/APU qualifications, Aircraft Recurrent/Refresher Training, Familiarization Training, and System Line Maintenance Training on assigned aircraft or on assigned systems for employees and customers.
2. Identify, research, and verify technical accuracy of information required for training course development. Monitor all applicable information sources to determine required changes to current training programs.
3. Oversee the development of new or updated training programs. Report progress to lead instructor. Interface with engineering and other cognizant personnel while using engineering material/technical data (block diagrams, blueprints, test specifications, and reports) to determine training content. Working with other instructors, guide the projects/subjects that they are working on to make sure any training development project meets established milestones. Ensure established standards are upheld.
4. Work with lead instructor to determine training needs and help determine the best approach to provide required training to the work-force and our customers (classroom, hands-on, CBT).
5. Prepare all necessary training materials (course outlines, lesson plans, books, handouts, presentations, CBTs) needed to meet training objectives while maintaining established departmental, company, and training provider standards.
6. As assigned, maintain technical expertise on existing Company products and acquire knowledge on new product designs from available sources, i.e. Engineering, Tech Ops, Pubs, etc.
7. As assigned, obtain and maintain qualification to instruct in at least three subject areas (system, area or subject) and any associated simulator requirements.
8. Schedule Aircraft Equipment resources as required for Practical Training.
9. Prepare and coordinate technical data and training information as required for use in off-site training/seminar sessions.
10. Develop and maintain Computer Based Training.
11. Solicit, promote, and exhibit a spirit of teamwork between Company and Flight Safety.

Additional Functions:
1. Mentor Training Instructors as required and provide assistance in the development of their skills and abilities.
2. Promote and ensure a safe training environment.
3. Update training programs/records accordingly.
4. Travel as necessary to conduct training.
5. Performing other duties as required and/or assigned.

Other Requirements:
1. A&P, FCC, or Pilot License preferred.
2. Instructor development training is required.
3. If the instructor will be a member of the Company/Flight Safety Total Technical Training program, an FSI Master Technician Certification required.
4. Expert user of PowerPoint, MSWord, and Lotus Notes.
5. Ability to utilize media equipment.
6. Ability to read/interpret blueprints and wiring diagrams.
7. Ability to solve the problems between peers and subordinates.
8. Must exhibit excellent verbal, written, and teaching skills.
 
Job Number: 10592
Job Location: Savannah, GA
Rate: $39.00 - $43.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Materials & Process Engineer

Description:
We are currently seeking M&P Engineer individuals with a focus in evaluation/processing of composites and adhesive secondary bonding of composites. Also must have ground floor experience and creating methods from scratch.

Seeking a first rate aircraft materials and processes engineer with experience in composite materials, testing, out-of-autoclave processing, as well as bonded assemblies. The engineer in this role will be expected to fully understand and maintain the materials and processes used. The primary task of this role will be to design and carry-out mechanical testing to support structural analysis of both current and future vehicle builds. This will require consultation and buy-in from stakeholders in various departments so strong interpersonal skills are also necessary. The engineer in this role is expected to be knowledgeable of basic mechanical testing methods, and familiar with composite and paste adhesive properties. An additional task of this role will be to review/write manufacturing procedures and processes to ensure compliance with design specifications.

Duties:
• Develop and refine material and process requirements
• Author materials and processing specifications
• Author material/joint test plans and their associated reports
• Review test data and undertake post-testing activities including design allowable calculations, equivalency determinations, and failure mode analysis
• Review test plans, process specifications, and other documents to ensure compliance with design requirements
• Confer with stakeholders in Manufacturing, Engineering, and other departments to facilitate production of parts

Requirements:
• Bachelor’s degree from an ABET accredited institution, with a concentration in a relevant Materials Engineering / Mechanical Engineering / Structural Engineering discipline
• Conversant in composite materials and processes used in the manufacture of composite aircraft fuselage and structural components including out-of-autoclave processing and bonded assemblies
• Experience in authoring / revising materials and process specifications for composite materials
• Experience in authoring test plans and reports
• Knowledgable of materials testing and characterization methods
• Familiarity with industry-accepted statistical analysis methods of treating test data such as those found in CMH17-1
• A desire to work in a fast-paced work environment with a motivated team
• Excellent verbal and written communication skills
• Excellent organizational skills and problem-solving skills
• Strong team player
• Excellent computer skills, Microsoft Word, Excel and PowerPoint
• Experience in stress analysis methods, including the use of hand calcs and FEM is a plus


The Structures Company is an AA/EOE.
 
Job Number: 279
Job Location: Mojave, CA
Rate: **DOE**
Per Diem: Yes
Overtime: Possible
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Materials and Process Engineer

Description:
Location: Savannah, GA
Rate: $55.00/HR
Duration: Long Term Contract

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
- Experience of working in a team environment to identify substantiating rationale for selecting materials and processes that become part of engineering models.
- Successful history of generating work authorizing instructions, test plans/reports and specifications.
- Ability to communicate with stakeholders and document accurate and timely project updates.
- Understand FAA regulations and certification processes.
- Special Missions - Highly prefer: KSA in Non-Metal Sealants and Coatings, Composites and Materials Processing.

Education and Experience Requirements:
Bachelor's degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principal Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 10372
Job Location: Savannah, GA
Rate: $55.00/HR
Per Diem: Split Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Materials and Processes Engineer

Description:
• Build and Lead all parts of Materials and Processes organization for the aircraft development.
• Lead development of the material and process specifications through collaboration with OEM, suppliers and vendors to guide program in selecting appropriate materials by drawing from civil, military and/or industry standards.
• Strong knowledge of aerospace composites and metallic materials, advanced manufacturing processes, test methods and design allowable development.
• Knowledge of aircraft flammability and structural bonding requirements for Part 25 certification.
• Provide advice on the applications, properties and processing of advanced material systems to all stakeholders - including, but not limited to, stress, design, customer support, quality and procurement.
• Perform trade studies, write proposals and support new business development plans.

Requirements:
• Must be either a US citizen, a US permanent resident (a “US Person”) or a Canadian citizen.
• Minimum Bachelor’s Degree in Engineering. Master’s Degree strongly preferred.
• 15+ years of hands-on experience in advanced materials and processes qualifications, testing, manufacturing and certification of Part 25 aircraft
• 5+ years of experience leading technical resources and team.
• In-depth and current knowledge of Part 25 regulatory requirements.
• Demonstrated success in dealing and influencing internal and external stakeholders.
• Experience in engineering support of aircraft production line activities is desirable.
 
Job Number: 42-014
Job Location: Reno, NV
Rate: DOE but very competitive
Per Diem: YES
Overtime: YES
Duration: 1 year+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design - Doors and Mechanisms

Description:
Minimum 8 years Mechanical Design experience with mechanisms and articulating doors - Thorough understanding of Auxiliary Mechanisms and Doors as well as Structures design criteria including design loads and durability (fatigue and corrosion)
Solid understanding of design and manufacturing processes involved for both metallic and composite parts with a focus on design for manufacturing and assembly (DFMA)
Solid understanding of 3D Model Based Definition (3D MBD), and the application of Geometric Dimensioning and Tolerancing (GD&T) for details and assemblies as well as tolerance stack-up analysis and GD&T as it applies to the Door systems
Minimum 10,000 hours or 5 years’ experience on CATIA v5 in Auxiliary Mechanisms and Doors Design, Kinematics workbench proficiency required

Preferred candidates will also have:
Proficiency in CATIA v5 workbenches: part design (machined parts), sheet metal, Composite Part Design (CPD), FT&A, Knowledge Based Engineering (KBE) tools including use of parameters, design tables, and Visual Basic macros Proficiency in SmarTeam PLM database - Experience with FAA/ODA certification and component testing
MRB experience with Hydraulics, Landing Gear, and Doors
Hands-on experience with aircraft production support
Prior work experience with Gulfstream aircraft design - Experience with knowledge management processes

Responsibilities include:
Develop structural and mechanical systems definition of the aircraft by producing the form, fit, and function documentation from conceptual layouts to final detail design
Engage various engineering, manufacturing, and product support teams to complete designs
Participate in design reviews - Interact with suppliers and prepare technical coordination memos
Prepare engineering reports - Document, track, and manage design projects of various magnitude using online knowledge bases and tracking tools
Provide technical leadership and mentoring to junior engineers

Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
 
Job Number: 19-143609
Job Location: GA
Rate: 70.00
Per Diem: Split
Overtime: Possible
Duration: Year +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Location: Savannah, GA
Rate: $58.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
- Mechanical Design in Aircraft Cabin Interiors, CATIA, Smarteam, AutoCAD, Microsoft Project, Excel and Power Point.
- Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
- Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
- Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
- Knowledgeable with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
- Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
- Design Engineer will be required to liaison with the shop on engineering issues.
- Design assignments Item Installation Analysis, Similarity Analysis and Mount Configuration along with any other required items.
- Design engineer will employ design standards consistent with company standards and accepted design methods are executed under the direction of the Mechanical Engineering Group Head to meet the manufacturing schedule.
- Additional responsibilities are out lined in the job description and as assigned by the Mechanical Engineering Group Head.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

Principle Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
2. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 10603
Job Location: Savannah, GA
Rate: $58.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Location: Savannah, GA
Rate: $70.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Qualified candidates will have:
- Minimum 8 years Mechanical Design experience with mechanisms and articulating doors
- Thorough understanding of Auxiliary Mechanisms and Doors as well as Structures design criteria including design loads and durability (fatigue and corrosion)
- Solid understanding of design and manufacturing processes involved for both metallic and composite parts with a focus on design for manufacturing and assembly (DFMA)
- Solid understanding of 3D Model Based Definition (3D MBD), and the application of Geometric Dimensioning and Tolerancing (GD&T) for details and assemblies as well as tolerance stack-up analysis and GD&T as it applies to the Door systems
- Minimum 10,000 hours or 5 years experience on CATIA v5 in Auxiliary Mechanisms and Doors Design, Kinematics workbench proficiency required

Preferred candidates will also have:
- Proficiency in CATIA v5 workbenches: part design (machined parts), sheet metal, Composite Part Design (CPD), FT&A, Knowledge Based Engineering (KBE) tools including use of parameters, design tables, and Visual Basic macros
- Proficiency in SmarTeam PLM database
- Experience with FAA/ODA certification and component testing
- MRB experience with Hydraulics, Landing Gear, and Doors
- Hands-on experience with aircraft production support
- Prior work experience with company aircraft design
- Experience with knowledge management processes

Competencies essential for the job:
- Strong interpersonal skills and ability to work in a team environment and across disciplines
- Ability to communicate technical findings and recommendations clearly
- Humility, be a team player, help teammates
- Passion for Auxiliary Mechanisms and Doors Design work

Responsibilities include:
- Develop structural and mechanical systems definition of the aircraft by producing the form, fit, and function documentation from conceptual layouts to final detail design
- Engage various engineering, manufacturing, and product support teams to complete designs
- Participate in design reviews
- Interact with suppliers and prepare technical coordination memos
- Prepare engineering reports
- Document, track, and manage design projects of various magnitude using online knowledge bases and tracking tools
- Provide technical leadership and mentoring to junior engineers

Education:
Bachelor's degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 years in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job
 
Job Number: 10571
Job Location: Savannah, GA
Rate: $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Location: Savannah, GA
Rate: $70.00 - $80.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
1. Knowledge of Flight Test Instrumentation Mechanical Design is required.
2. Working knowledge of CATIA V5 and SmarTeam is required.

Education and Experience Requirements:
1. Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
1. Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

Principle Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
2. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 10573
Job Location: Savannah, GA
Rate: $70.00 - $80.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Location: Savannah, GA
Rate: $55.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Job Description:
- Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Final Phase Completions.
- Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
- Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.

Required Skills:
- Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
- Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
- Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
- Design Engineer will be required to liaison with the shop on engineering issues.

Design assignments include but are not limited to:
- Item Installation Analysis
- Similarity Analysis
- Configuration Analysis Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.

Education:
- Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
- See Other Requirements in Job Description.
- 5 years in specific technical discipline or 10 years broad engineering experience in several technical disciplines with Bachelors.
- Experience credit considered for related adv degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.
 
Job Number: 10428
Job Location: Savannah, GA
Rate: $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Location: Savannah, GA
Rate: $58.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
- Mechanical Design in Aircraft Cabin Interiors, CATIA, Smarteam, AutoCAD, Microsoft Project, Excel and Power Point.
- Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
- Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
- Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
- Knowledgeable with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
- Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
- Design Engineer will be required to liaison with the shop on engineering issues.
- Design assignments Item Installation Analysis, Similarity Analysis and Mount Configuration along with any other required items.
- Design engineer will employ design standards consistent with company standards and accepted design methods are executed under the direction of the Mechanical Engineering Group Head to meet the manufacturing schedule.
- Additional responsibilities are out lined in the job description and as assigned by the Mechanical Engineering Group Head.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

Principle Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
2. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 10435
Job Location: Savannah, GA
Rate: $58.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer - Secret Clearance

Description:
Major purpose:

Mechanical design, integration, test and production support of simulation equipment. Responsibilities include development of 3D models, detailed drawings and interfacing with manufacturing.



Education/Experience/Licenses etc.:

Must have an existing, active Secret Security Clearance.

•BS in Mechanical Engineering or equivalent experience in an engineering discipline

•Prefer 4+ years of directly related experience

•Experience developing 3D models and detailed drawings

•Ability to develop innovative solutions

•Must have strong verbal and written communication skills with the ability to communicate complex issues to technical and non-technical audiences that include peers, management, and customers



Desired Qualifications

•Experience using SolidWorks and AutoCAD

•Finite Element Analysis application experience

•Familiarity with aircraft cockpit systems

•Simulation equipment experience




Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-01330
Job Location: Broken Arrow, OK
Rate: 70.0USD/Hour
Per Diem: NO
Overtime: POSSIBLE
Duration: 2019-05-03 00:00:00.0
Start Date: 2019-02-04 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Kevin Lord
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer - Secret Clearance

Description:
Major purpose:

Mechanical design, integration, test and production support of simulation equipment. Responsibilities include development of 3D models, detailed drawings and interfacing with manufacturing.



Education/Experience/Licenses etc.:

Must have an existing, active Secret Security Clearance.

•BS in Mechanical Engineering or equivalent experience in an engineering discipline

•Prefer 4+ years of directly related experience

•Experience developing 3D models and detailed drawings

•Ability to develop innovative solutions

•Must have strong verbal and written communication skills with the ability to communicate complex issues to technical and non-technical audiences that include peers, management, and customers



Desired Qualifications

•Experience using SolidWorks and AutoCAD

•Finite Element Analysis application experience

•Familiarity with aircraft cockpit systems

•Simulation equipment experience




Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-01330
Job Location: Broken Arrow, OK
Rate: 70.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2019-05-03 00:00:00.0
Start Date: 2019-02-04 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Kevin Lord
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer SECRET CLEARED CATIA V (089)

Description:
*This is a full time, 1 year contract, located in Palmdale, CA*

We are hiring for a long term contract, CATIA V design engineer who will be designing wire harnesses for military aircraft. Candidate will be designing installations, integrations, part modifications, and assemblies, to military specifications such as ANSI and/or ASME.



Required:
*12-15 years’ experience in electronics/wire harness design using CATIA V5.
*Experience with ANSI/ASME Y14.100 or similar design/drafting standards
*Per diem split is available for those travelling for this position

*Must have an Active Secret Clearance (reinvestigated in last 5 years)

*Engineering Degree
 
Job Number: 089
Job Location: Palmdale, CA
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical System Design Engineer

Description:
• Perform preliminary and detail design of aircraft mechanical systems, including flight controls, landing gear and ECS systems.
• Create 3D/2D definition.
• CATIA V5 is a plus.
• Participate in the Engineering definition review, approval and release process
• Support the review of manufacturing plans and procedures to ensure compliance with design requirements
• Support the creation of structural test plans which will be used to verify manufacturing processes meet design intent and requirements.
• Ability/Interest interacting with the shop floor.

The Structures Company is an AA/EOE.
 
Job Number: 264
Job Location: CA
Per Diem: Yes
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Engineer - Fuel Systems

Description:
Sr. Mechanical Systems Engineer:

Must also have experience with the following:

• Must have clean sheet design experience
• Must have a fuel systems background.
• System analysis – perform pressure drop analysis, among other analysis.
• System testing required for PDR.
• Integration of entire system into aircraft for PDR.
• Create detailed models.
• Spec out system parts.
• Coordinate/support manufacturing
• FAR Part 23 experience is a huge plus



The Structures Company is an AA/EOE.
 
Job Number: 252
Job Location: Manassas, VA
Rate: $80/Hr.
Per Diem: Yes
Duration: 9 Months - Possibly Longer
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Engineer - Landing Gear

Description:
Seeking a Mechanical Systems Engineer with landing gear background

Must have experience with:
• Must have clean sheet design experience
• System analysis – perform pressure drop analysis, among other analysis.
• System testing required for PDR.
• Integration of entire system into aircraft for PDR.
• Create detailed models.
• Spec out system parts.
• Coordinate/support manufacturing
• FAR Part 23 experience is a huge plus
• Must have a BS degree (BSAE, BSME)

The Structures Company is an AA/EOE.
 
Job Number: 281
Job Location: VA
Rate: $75-$85/Hr.
Per Diem: Yes
Duration: 3-6+ Months - Possibly Longer
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Testing Engineer

Description:
Job Description:
Support 3rd Shift testing in the Integrated Test Vehicle laboratory. Responsibilities include, but are not limited to, communicating with the test team to configure, monitor and maintain the laboratory test setup (includes complex Hydraulics, Electronics and Mechanical Systems). Opportunity exists for expanded mechanical design work. This is a hands-on role that provides the opportunity to be part of a unique test team performing work class testing on advanced aircraft systems.

Education:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.
 
Job Number: TE2018
Job Location: Seattle, WA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6 mon
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Shailendra Mishra
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Metrology Engineer II

Description:
Position Purpose:
Under minimal supervision, prepare, conduct, and evaluate for the implementation, programming and support of metrology equipment in tooling, program development and production. Assist with the improvements and problem solving for design and manufacturing issues related to tooling, material fabrication and assembly methods.

Unique Skills:
Experience with Laser Trackers, scanning and / or photogrammetry preferred. The ability to perform measurements accurately and precisely while assisting with root cause analysis based on the data. Metrolog software knowledge preferred but SA, Polyworks, Verisurf, or Geomagic knowledge more than acceptable. Experience with measuring large assemblies and tooling preferred.

Education and Experience Requirements:
Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen (18) months of Metrology Engineering, Manufacturing Engineering, Automation Engineering or related technical experience.

Principle Duties and Responsibilities:
• Interpret & consolidate aircraft engineering, tooling designs and production requirements, to develop optimized measurement plans and processes.
• Under minimal supervision, develop programing for all measurement equipment that will be used in the development, manufacture and support of Gulfstream aircraft.
• Collaborate with engineering, tooling, manufacturing engineering and operations to determine optimal manufacturing procedures.
• Assist in developing and documenting standards for the handling and utilization of metrology equipment.
• Create standardized inspection reports through the utilization of Metrologic software.
• Study and optimize equipment performance for increased capacity and equipment efficiency.
• Interact and collaborate with equipment vendors on warranty repairs, necessary improvements and upgrades.
• Set up and utilize precision measuring tools; validates measurement results for accuracy and repeatability.
• Provide and/or contribute to the documentation of new or recent processes involving metrology techniques or equipment.
• Coordinate the implementation of projects between multiple organizations.
• Support all Safety, Sustainability and Ergonomic Initiatives.
• Work to improve daily processes, and ensures all work meets customer requirements.
• Assist tool shop as needed, during periodic and conformity Inspections.
• Provide input toward the selection of metrology equipment and software.
• Perform other duties as assigned.

Other Requirements:
• Extensive knowledge of metrology equipment, software and current measurement techniques.
• Knowledge 3D CAD/CATIA modeling and an understanding of GD&T.
• Knowledge of Lean and/or Six Sigma principles.
 
Job Number: 24-324
Job Location: Savannah, GA
Rate: $55
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Metrology Engineer II

Description:
Position Purpose:
Under minimal supervision, prepare, conduct, and evaluate for the implementation, programming and support of metrology equipment in tooling, program development and production. Assist with the improvements and problem solving for design and manufacturing issues related to tooling, material fabrication and assembly methods.

Education and Experience Requirements:
Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen (18) months of Metrology Engineering, Manufacturing Engineering, Automation Engineering or related technical experience.

Unique Skills:
• Must be US citizen.
• Ability to read/understand complex blueprints, sketches, verbal instructions and tools.
• Tooling experience and/or relevant training preferred.
• Experience with using precision 3D measurement devices to locate and assemble parts or tools.
• Must be proficient in the use of laser trackers.
• Experience with Metrolog X4 or X4V5 software preferred. Experience with Catia V5 software preferred.
• This job involves extensive Laser Tracker work on the shop floor. Experience with Laser Trackers is a must.

Principle Duties and Responsibilities:
• Interpret & consolidate aircraft engineering, tooling designs and production requirements, to develop optimized measurement plans and processes.
• Under minimal supervision, develop programing for all measurement equipment that will be used in the development, manufacture and support of Gulfstream aircraft.
• Collaborate with engineering, tooling, manufacturing engineering and operations to determine optimal manufacturing procedures.
• Assist in developing and documenting standards for the handling and utilization of metrology equipment.
• Create standardized inspection reports through the utilization of Metrologic software.
• Study and optimize equipment performance for increased capacity and equipment efficiency.
• Interact and collaborate with equipment vendors on warranty repairs, necessary improvements and upgrades.
• Set up and utilize precision measuring tools; validates measurement results for accuracy and repeatability.
• Provide and/or contribute to the documentation of new or recent processes involving metrology techniques or equipment.
• Coordinate the implementation of projects between multiple organizations.
• Support all Safety, Sustainability and Ergonomic Initiatives.
• Work to improve daily processes, and ensures all work meets customer requirements.
• Assist tool shop as needed, during periodic and conformity Inspections.
• Provide input toward the selection of metrology equipment and software. Perform other duties as assigned.

Other Requirements:
• Extensive knowledge of metrology equipment, software and current measurement techniques.
• Knowledge 3D CAD/CATIA modeling and an understanding of GD&T.
• Knowledge of Lean and/or Six Sigma principles.
 
Job Number: 24-317
Job Location: Savannah, GA
Rate: $50-$55
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Metrology Engineer II

Description:
Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****

Required Skills:
- Must be US citizen.
- Ability to read/understand complex blueprints, sketches, verbal instructions and tools.
- Tooling experience and/or relevant training preferred.
- Experience with using precision 3D measurement devices to locate and assemble parts or tools.
- Must be proficient in the use of laser trackers.
- Experience with Metrolog X4 or X4V5 software preferred.
- Experience with Catia V5 software preferred.
- This job involves extensive Laser Tracker work on the shop floor.
- Experience with Laser Trackers is a must.


Education and Experience Requirements:
Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen (18) months of Metrology Engineering, Manufacturing Engineering, Automation Engineering or related technical experience.


Position Purpose:
Under minimal supervision, prepare, conduct, and evaluate for the implementation, programming and support of metrology equipment in tooling, program development and production. Assist with the improvements and problem solving for design and manufacturing issues related to tooling, material fabrication and assembly methods.


Principle Duties and Responsibilities:
Essential Functions: 1. Interpret & consolidate aircraft engineering, tooling designs and production requirements, to develop optimized measurement plans and processes. 2. Under minimal supervision, develop programming for all measurement equipment that will be used in the development, manufacture and support of company aircraft. 3. Collaborate with engineering, tooling, manufacturing engineering and operations to determine optimal manufacturing procedures. 4. Assist in developing and documenting standards for the handling and utilization of metrology equipment. 5. Create standardized inspection reports through the utilization of Metrologic software. 6. Study and optimize equipment performance for increased capacity and equipment efficiency. 7. Interact and collaborate with equipment vendors on warranty repairs, necessary improvements and upgrades. 8. Set up and utilize precision measuring tools; validates measurement results for accuracy and repeatability. 9. Provide and/or contribute to the documentation of new or recent processes involving metrology techniques or equipment. 10. Coordinate the implementation of projects between multiple organizations. 11. Support all Safety, Sustainability and Ergonomic Initiatives.


Additional Functions: 1. Work to improve daily processes, and ensures all work meets customer requirements. 2. Assist tool shop as needed, during periodic and conformity Inspections. 3. Provide input toward the selection of metrology equipment and software. Perform other duties as assigned.


Other Requirements: 1. Extensive knowledge of metrology equipment, software and current measurement techniques. 2. Knowledge 3D CAD/CATIA modeling and an understanding of GD&T. 3. Knowledge of Lean and/or Six Sigma principles.
 
Job Number: 10342
Job Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Per Diem: Split Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Metrology Specialist

Description:
Metrology Specialist with experience in setup, build, and inspection of large tools and assembly structures. This role is for a hands-on person with great versatility with regard to building and assembling large precision structures. The first task of this role will be to execute the installation and setup of new production fixtures, tooling, and equipment in a new production facility. The specialist in this position will support the production tooling and equipment design and installation in order to create an efficient, organized, and lean factory. After production operations begin, the Metrology Specialist will work closely with production personnel to maintain equipment and tooling and contribute to process improvement using lean processes and tools. Metrology Specialists will also help with the large scale aircraft assembly steps and inspection.

Key Components of position
• Hands‐on Tooling assembly
• Large structure handling: driving a forklift, scissor lift, boom lift, etc. operating a crane or hoist, installing concrete mounting points in floor, accurately locating large or heavy structure to within .005” accuracy.
• Must be able to lift 50 lbs.
• Utilizing CAD or 3D software for inspection (one or more of the following):
o PC Demus, Verisurf, Geomagic, Polyworks, Spacial Analyser, or similar
• Metrology
• Working with laser trackers or similar positioning systems

Professional requirements for position
• Hands on experience in setup of large scale precision fixtures or tooling
• Excellent Organizational Skills and problem-solving skills
• Excellent computer skills (CAD and/or 3D software packages) as well as standard Microsoft products
• Strong team player
• Experience with large aircraft assembly and inspection a plus Metal shop skills (welding, grinding, machining, etc) a plus
• Must be able to take direction well and is a strong team player.
• Extreme attention to detail and continual pursuit of perfection.
• Excellent listening and communication skills.
• Ability to maintain composure in high pressure situations
• Excellent organizational skills and problem-solving skills.
Physical Requirements
• Must be able to stand for extended periods – 8 hours min.
• Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces.
• Physically able to handle items weighing up to 40lbs (unassisted).
• Working in confined spaces
• Working on Elevated Platforms

The Structures Company LLC is an AA/EOE.
 
Job Number: 507
Job Location: Mojave, CA
Rate: $60-$85/Hr. **DOE**
Per Diem: Yes
Overtime: Possible
Duration: Long Term
Start Date: ASAP
Input Date: 06/14/2022
Last Updated: 07/22/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mid-Level Composite Aero-Structures Design Engineer

Description:
Composite Aero-Structures Design Engineer
Location: Mojave, CA
12+ month contract

Essential Functions & Responsibilities:

Use CATIA V5 with Composite Work Bench to Design Composite aircraft structures.

Education: BS degree in Engineering: Mech-Aero-Civil-Struct.

2-10 years of experience required.

REQUIRED Minimum Composite Design Experience:

2 Year’s Experience of air- frame design (Wing or Fuselage or Empennage)
2 Years experience with CATIA V5 with CPD / CWB and/or Fibersim.
Mandatory Software Skills:

CATIA V5 + Composite Work Bench CWB / CPD or Fibersim.
MS Word, MS Excel, MS PowerPoint.
Personal and Interpersonal Skills

Clear intuitive understanding of load path & design intent of structural parts.
Understanding of aircraft internal loads & how to design efficient structure.
Strong interpersonal skills with willingness to ask questions & dig for answers
High degree of collaboration and openness with team members is expected.
Ability to work independently, be insightful, resourceful & innovative.
Willingness to do whatever work is assigned.
Great verbal & written communication skills in English.
Ability and willingness to interface with your co-workers.








Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 56343
Job Location: Mojave, CA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12+ months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NC Programmers

Description:
5 Axis, MASTERCAM, Aircraft exp.
 
Job Number: 0301
Job Location: Windsor, CT
Rate: Open
Per Diem: yes-split
Overtime: yes
Duration: 8 mos+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: HI-TEK PROFESSIONALS INC
Attention: Greg Ambrose
Address: 103 CHESLEY DR STE 207
City, State: MEDIA, PA 19063
Phone: 610/534-8701
800 Phone: 877/271-1799
Fax Phone: 610/534-8697
Website: www.hitekprofessionals.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Non-Destructive Testing (NDT) Level 3 Technician (UT, ET, PT)

Description:
The ideal candidate will be primarily developing UT, ET and PT Non-Destructive test instructions for composite components.

Other NDT techniques will also be developed depending on candidates existing experience with other methods.

Occasional travel will be required to other Facilities within Connecticut and to Pax River, MD to review aircraft configuration, to perform Non-Destructive Inspection, and to develop Inspection Techniques for aircraft.

You will work closely with a team of Design Engineers, NDT Level 3's, Level 2’s, and Engineering Technicians to design inspection standards, to coordinate for standard fabrication, and to write and approve inspection techniques for components using the standards.

The position is contingent upon being able to certify in UT, ET and PT Level 3 per NAS 410 requirements within 90 days of beginning employment.

Secondary Level 3 responsibilities include:
•Performing engineering evaluations including defect analysis, NDT methods analysis, and inspection (when inspection is required must have a minimum level II certification).
•Preparing and reviewing engineering specifications.
•Developing and evaluating new equipment and technology.
•Providing technical support to manufacturing, engineering, programs, field personnel, and suppliers.
•Auditing internal and external NDT inspection facilities.
•Participating in development of NDT training course material for Level I, II, and III.
•Testing and certifying NDT Level I, II, and III Inspectors in accordance with NAS 410 and company requirements.

Basic Qualifications
•Certification (ASNT Level 3 certification, NAS 410 Level 3 certification, or Equivalent in UT, ET and PT).
•Ability to certify to NAS 410 UT, ET and PT Level 3 requirements within 90 days of employment. (Including vision correctable to 20/25 in at least one eye.)
•Experience performing UT, ET and PT NDT on Composite materials.
•Proficiency in Microsoft Office products (Word, PowerPoint and Excel) and database utilization.
•Must be a US Citizen or legally authorized to work in US as a permanent resident.

Desired skills
•Composite UT, ET and PT experience on Aerospace Components.
•Bachelor's degree or above in Engineering or Technology discipline.
•Documented 5-10 years of Aerospace Non-destructive testing.
•Technical writing experience.
•Non-destructive test (NDT) experience with composite structures.
•The ability to collaborate and work well with fellow team members.
•Experience using CATIA or other 3D modeling software a plus.
•Familiarity with NAVAIR Nondestructive inspection manuals and processes.
•Experience in Laser Testing Methods (LM), or Thermal/Infrared Testing (IR) is a plus
 
Job Number: 1810094139
Job Location: Stratford, CT
Per Diem: split
Overtime: possible
Duration: 18 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Powerplant ECS & Cooling Systems Engineer

Description:
Location: Savannah, GA
Rate: $63.00/HR
Duration: Long Term Contract

****MUST be a U.S. Citizen or Permanent Resident****

Candidate should have experience with:
- Aircraft environmental control systems
- Specialized onboard equipment cooling systems, including: Liquid cooling systems, Air cycle systems, and Vapor cycle systems
- Cooling system performance analysis
- Heat exchanger design and analysis
- Component qualification and certification test
- System test and certification
- Part 25 and DO-160
- Supplier coordination

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 10376
Job Location: Savannah, GA
Rate: $63.00/HR
Per Diem: Split Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Powerplant, ECS & Fuel Systems Engineer

Description:
Location: Savannah, GA
Rate: $75.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
1. Proficient in Catia V5 and all design workbenches associated with tubing, sheetmetal, surfacing.
2. Proficient in Smarteam and Solumina.
3. Candidate to be a self-starter, able to work multiple tasks concurrently with ability to meet stringent schedule requirements.
4. Very Highly Preferred - 5 years + exp in Fuel, PP, and ECS.

Education and Experience Requirements:
1. Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Five (5) yrs in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
1. Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principle Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering related field preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 10631
Job Location: Savannah, GA
Rate: $75.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Engineer Software 3 - Clearance / URGENT FL

Description:
Principal Engineer Software 3 (Job Number: 19007337)

Number of Openings: 1

Location(s): United States-Florida-Melbourne


Shift: 1st Shift

Target Start Date: Jun 10, 2019

Target End Date: Jun 5, 2020

Requested Hourly Rate: 55.00

Work Schedule: 9/80

Duration of Assignment: Up to 1 year

Candidates NEEDED ASAP

The Software Engineer will develop, modify and maintain customized or standardized applications using software engineering best practices and standards, and participate in the full life-cycle of software development, to include requirements development, modeling and design, application development, unit to CSCI testing, integration, formal system testing, release, installation, and maintenance. Excellent verbal, written and interpersonal skills are required.

The E-2D program is seeking a software engineer to support multiple E-2D programs. Their responsibilities would include:

• Full Lifecycle design, implementation, and unit testing of software
• Work with various sub teams to integrate functionality with other IPTs
• Actively participate in code reviews
• Develop SW products from all phases of SW life cycle.


Basic Qualifications:

Bachelor’s Degree in a Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university and 5 years of software engineering experience OR


Master’s Degree in Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university and 3 years of software engineering experience


Experience developing software / writing code in C/C++ or Ada

Experience with Linux



Preferred Qualifications:

Bachelor’s or Master’s degree in Computer Engineering, Computer Science, or Electrical Engineering


Strong Problem Solving Skills


Experience in Software Test


Familiarity with Atlassian tool suite and tools like git and Confluence


Familiarity with Agile software development process


DOORS


Eclipse or other integrated development environment (IDE)


Knowledge of Linux systems with basic commands


Familiar with aircraft systems/subsystems architectures (i.e., CNI, vehicle, cockpit, …)


Experience with OpenGL
 
Job Number: JK-1748S
Job Location: Melbourne, FL
Rate: 55/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Software Engineer 3 - Clearance FL

Description:
1740 Principal Software Engineer 3 (Job Number: 19006470)

Number of Openings: 1

Location(s): United States-Florida-Melbourne


Shift: 1st Shift

Target Start Date: May 6, 2019

Target End Date: May 1, 2020
Requested Hourly Rate: 50.00

Pay Rate: $50/hr

Work Schedule: 9/80

Duration of Assignment: Up to 1 year


The Software Engineer will develop, modify and maintain customized or standardized applications using software engineering best practices and standards, and participate in the full life-cycle of software development, to include requirements development, modeling and design, application development, unit to CSCI testing, integration, formal system testing, release, installation, and maintenance. Excellent verbal, written and interpersonal skills are required.

The E-2D program is seeking a software engineer to support multiple E-2D programs. Their responsibilities would include:

• Full Lifecycle design, implementation, and unit testing of software

• Work with various sub teams to integrate functionality with other IPTs

• Actively participate in code reviews

• Develop SW products from all phases of SW life cycle.

Basic Qualifications:

Bachelor’s Degree in a Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university and 5 years of software engineering experience OR
Master’s Degree in Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university and 3 years of software engineering experience
Experience developing software / writing code in C/C++ or Ada
Experience with Linux

Preferred Qualifications:

Bachelor’s or Master’s degree in Computer Engineering, Computer Science, or Electrical Engineering
Strong Problem Solving Skills
Experience in Software Test
Familiarity with Atlassian tool suite and tools like git and Confluence
Familiarity with Agile software development process
DOORS
Eclipse or other integrated development environment (IDE)
Knowledge of Linux systems with basic commands
Familiar with aircraft systems/subsystems architectures (i.e., CNI, vehicle, cockpit, …)
Experience with OpenGL
Length of C/L = 12 months
 
Job Number: MB-1740S
Job Location: Melbourne, FL
Rate: 50/hr
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Software Engineer 3 FL

Description:
Principal Software Engineer 3 (Job Number: 18026677, 18026687, 18026691, 18026697)

Number of Openings: 1

Location(s): United States-Florida-Melbourne


Shift: 1st Shift

Target Start Date: Mar 25, 2019

Target End Date: Mar 20, 2020

Pay Rate: $50/hr

Work Schedule: 9/80

Duration of Assignment: Up to 1 year


The Software Engineer will develop, modify and maintain customized or standardized applications using software engineering best practices and standards, and participate in the full life-cycle of software development, to include requirements development, modeling and design, application development, unit to CSCI testing, integration, formal system testing, release, installation, and maintenance. Excellent verbal, written and interpersonal skills are required.

The E-2D program is seeking a software engineer to support multiple E-2D programs. Their responsibilities would include:
• Full Lifecycle design, implementation, and unit testing of software
• Work with various sub teams to integrate functionality with other IPTs
• Actively participate in code reviews
• Develop SW products from all phases of SW life cycle.


Basic Qualifications:

Bachelor’s Degree in a Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university and 5 years of software engineering experience OR
Master’s Degree in Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university and 3 years of software engineering experience
Experience developing software / writing code in C/C++ or Ada
Experience with Linux




Preferred Qualifications:

Bachelor’s or Master’s degree in Computer Engineering, Computer Science, or Electrical Engineering
Strong Problem Solving Skills
Experience in Software Test
Familiarity with Atlassian tool suite and tools like git and Confluence
Familiarity with Agile software development process


DOORS
Eclipse or other integrated development environment (IDE)
Knowledge of Linux systems with basic commands
Familiar with aircraft systems/subsystems architectures (i.e., CNI, vehicle, cockpit, …)
Experience with OpenGL
 
Job Number: MB-1725S
Job Location: Melbourne, FL
Rate: 48-50/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Production Supply Chain Manager / direct hire Palmdale CA

Description:
Job ID#: 21680 Direct Hire position

Seeking production control experience such as stock control, inventory, supply chain, shipping, etc. along with the management experience.

The role is Production Control Manager (attached is the job description).

Key areas: extensive and progressive experience in production control combination of the following.
• supply chain management
• project management dealing with budgets
• labor utilization
• inventory management
• solid leader
o Overall 9+ years of experience with Master’s degree
o 11+ years of experience with Bachelor’s degree
o At least 5+ years of leadership experience
o mentorship
o communication
o development
Industries:
• Any – aerospace, manufacturing, automotive, etc.

Alternative titles:
• Production Control Supervisor and/or Manager
• Supply Chain/Inventory Supervisor and/or Manager
• Inventory Supervisor and/or Manager
• Stockroom or warehouse Supervisor and/or Manager
• Program Manager
• Project Manager


Job Title: Experienced Production Supply Chain Manager
Job Category: Manufacturing, Material and Production Control
City: Palmdale
State: California
Full-Time Salary


**Seeking strong production control experience including inventory, supply chain, shipping, etc. along with the management.

Job Summary


We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

The experienced Supply Chain Inventory Manager is responsible for planning and managing performance of the aircraft production and material control department(s) typically through experienced professional staff or subordinate manager(s). The position manages some or all phases of production and material control to ensure a controlled flow of approved materials timed to meet production requirements. Participates with executive management in developing and implementing annual and long-term objectives for the department(s). May be responsible for decisions that have an impact on work processes and outcome where erroneous decisions could result in serious delays in projects and/or operations. Participates in defining production planning, material control, and administration of the designated ERP tools in support of program schedules.



Duties and Responsibilities

•Manages all phases of the department(s) task execution including planning and recommending policies and procedures to ensure department objectives are attained.


•Participates in the development, interpretation and implementation of manufacturing policies and practices while participating in determining and implementing necessary changes.


•Participates in developing and implementing annual and long-term objectives and monitors adherence to plans and objectives.


•Ensures the scheduling of material will meet the company's commitment to delivering quality products with optimum utilization of resources.


•Monitors adherence to performance standards by support groups such as purchasing, contracts, finance, and quality, and ensures issues are addressed as needed. Monitors performance from development of material master creation through procurement, material receipt and consumption on the manufacturing shop floor. Manages the Material Requirements Planning (MRP) functions through the appropriate ERP tool.


•Ensures the appropriate identification and management of material requirements are established for production and manufacturing from inception to delivery.


•Develops, recommends, implements and monitors consistency of processes across multiple programs to the maximum extent practical; conducts quality control audits and evaluates work standards and performance levels to ensure uniformity, effectiveness and appropriate staffing levels are maintained.


•Oversees the minimizing of inventory carrying cost and reduction of material burden contribution to meet industry standard.


•Manages and actively participates in the planning, attraction, selection, retention, and development of human resources to ensure the availability of the required professional talent to ensure organizational requirements are met.


•Maintains the strict confidentiality of sensitive information.


•Responsible for ensuring all laws, regulations and other applicable obligations are observed wherever and whenever business is conducted on behalf of the Company.


•Responsible for ensuring work is accomplished in a safe manner in accordance with established operating procedures and practices. Additional Functions Other duties as assigned or required.


Job Qualifications
•Bachelor's or master's degree in business administration or related field: ◦Eleven or more years progressive experience with a bachelor's degree
◦Nine years or more with a master's degree.​
◦​Five or more years managing staff in a manufacturing environment. Equivalent professional experience may be substituted in lieu of education.

•Must demonstrate a thorough expertise of production, material control and purchasing principles, theories and concepts.
•Must be able to provide leadership and direction to professional staff and lower management levels.
•Must be customer focused and possess:◦the ability to identify issues, analyze and interpret data, and develop innovative solutions to a variety of complex problems using a high degree of independent judgment;
◦excellent verbal and written communication skills to accurately document, report, and present findings to a variety of internal and external audiences;
◦excellent interpersonal skills to influence and guide all levels of employees;
◦the ability to effectively and efficiently initiate, plan, budget and manage projects;
◦the ability to develop and administer budgets, schedules and performance standards; and,
◦excellent computer skills.
◦Ability to work independently or in a team environment is essential as is the ability to work extended hours and travel as required.


Equal Opportunity Employer.

Travel Percentage Required : 0% - 25%
 
Job Number: JE-21680
Job Location: Palmdale, CA
Rate: Salary range: 95K – 115K
Duration: direct hire
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Stress Engineer

Description:
• Contributes to planning, developing and coordinating of important engineering projects
• Must have some MRB experience in support of a/c structural repairs.
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area Additional Functions

Unique Skills:
• Must have a minimum of 10 years experience in stress analysis on primary aircraft structure.
• Must have a minimum of 5 years experience in stress analysis on aircraft composite structure.
• Must have a minimum 5 years experience supporting MRB activities on aircraft composite structure.
• Working knowledge of CATIA V5 is a plus.
• This position is full time at a supplier in Tulsa, OK.

Experience/Education:
• Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
 
Job Number: 24-310
Job Location: Tulsa, OK
Rate: $70 - $79
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Program Manager

Description:
Education Required: Bachelor's Degree or higher
Duties and Responsibilities include the following:
Seven to 10 years experience in the following:
Reviews project proposal or plan to determine time frame, funding limitations, procedures for accomplishing project, staffing requirements, and allotment of available resources to various phases of project to include material cost savings or expenses.

Establishes decides on work plan and staffing for each phase of project
Confers with project staff to outline workplan and to assign duties, responsibilities, and scope of authority.
Directs and coordinates activities of project personnel to ensure project progresses on schedule and within prescribed budget

Reviews status reports prepared by functional managers and consolidates/maintains the Master Program Schedule and is responsible for presenting schedule to customer
Prepares project reports for management, client, or others

Confers with project personnel to provide technical advice and to resolve problems
Coordinates project activities with activities of government regulatory or other governmental agencies
Able to communicate program progress and deficiencies to various RSM/SAC/LM leaders including the C-suite.

Previous experience in VVIP, Head of State, in custom aircraft (rotary or fixed wing) interiors preferred
Must have a history in Management of others.
The program is the VH-92A/Sikorsky S-92
Must be a U.S. Citizen
 
Job Number: 1728244
Job Location: Portland, ORE
Rate: 140-175K annually
Duration: Direct Hire
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: P O BOX 965280
2886 SANDY PLAINS RD

City, State: MARIETTA, GA 30066
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer

Description:
Description:
Applies extensive knowledge of principles, theories, concepts and industry practices to plan, direct, and coordinate the engineering design, integration, analysis and certification of company products and processes for manufacturing of complete aircraft parts, components, subsystems and complete systems for operational aircraft.


Requirements:
• Catia V5
• Project Engineering
• Multi-Function Coordination
• New Product Definition
• Design Integration (10+ Years)
• Configuration Management
• PMP is a plus
• SmarTeam is a plus
• Background in aircraft design and project coordination is required
• Competent in the use of standard software applications such as Microsoft Word and Excel and operate standard office equipment.
• BSME preferred


The Structures Company is an AA/EOE.
 
Job Number: 261
Job Location: OK
Rate: $60-$65/Hr. **DOE**
Per Diem: Yes
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer

Description:
Project Engineer

Phoenix, AZ
$33.38/hr
10 month contract
First Shift
*MUST BE A U.S. CITIZEN*
*NO RELOCATION COMPENSATION / NO PER DIEM SPLIT*

Primary Responsibilities:
•Design inflatable structures for aircraft evacuation systems and liferafts.
•Assist in products transition from design to production.
•Designs, develops and improves new or existing Aircraft components.
•Directs the building and testing of prototypes.
•Directs compilation of manuals for customers on products.
•Assist Model Shop and/or Drafting.
•Performs analysis of components and systems.
•Performs financial analysis of a project's design components.
•Conceptualizes and prepares preliminary and final detail design and documentation of evacuation systems components and assemblies.
•Manages design process and revisions throughout initial testing.
•May be assigned limited responsibility for managing project obligations, such as management of technical documentation package for a product.
•Manages moderately complex/sized projects, hardware design, testing, processing, and projects, including foreseeing technical problems, resolving significant technical problems that may be directed to their expertise.
•Developing patentable material and/or to oversee large, business-critical projects. Participates as a team member in a specific phase of a broad engineering assignment.
•Prepares or directs preparation of appropriate documentation for assigned projects.
•Conducts Root Cause/Corrective Action Investigations
•Ensures successful completion of the assigned project phase within the budgeted time and cost constraints.
•Participates in defining engineering approaches, and in planning and scheduling work.
*Education / Certifications
Required:
•Bachelor's of Science Degree in Engineering from an accredited university

Preferred:
•Master's of Science Degree in Engineering from an accredited university
•Green or Black Belt Certified

*Experience/Qualifications
Basic Qualifications:
•Good interpersonal skills.
•Ability to multi-task and prioritize both daily issues and longer term projects.
•Strong written and verbal skills.
•Good computer skills, MS Office.
•Good analytical skills.
•At least 5 years of product development experience. (3 years with master's degree)

Preferred Qualifications:
•Experience with inflatable and machined component design.
•Experience as a project engineer through entire STC, PMA, and/or TSO projects
 
Job Number: 10306
Job Location: Phoenix, AZ
Rate: 33.38
Per Diem: No
Overtime: Possible
Duration: 10 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer

Description:
Job Description:
Provides the Engineering leadership to a team representing the Cabin Systems In-flight Entertainment and Connectivity Engineering group, which may include internal and external resources and customers. Responds to changes to SOW, assesses the impact and negotiates proposed changes to determine modifications to the deliverables, resources, costs and schedules. Leads project execution to complete the work statement. Identifies performance metrics. Plans, identifies, and coordinates resources required over the life of the project or program. Defines plans for risk mitigation and opportunity. Focus on developing, implementing, integrating, and delivering customer introduction aircraft. Works closely with multiple cabin systems platform teams, cabin systems tech center, other systems teams as well as interiors teams. Supports configuration development, resolving cross-commodity design & interface issues, identifying & managing risks for the Customer Introductions and development projects, and serving as the Cabin Systems Integration Engineer to the program. Projects typically span numerous teams (within and beyond both Payloads and Systems) and require consideration of technical, business, and external factors. Works under minimal direction.

Education: Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
 
Job Number: PE2018
Job Location: Everett, WA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6 mon
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer

Description:
Project Engineer

Phoenix, AZ
$43/hr
7 month contract
First Shift
*MUST BE U.S. CITIZEN*
*NO RELOCATION COMPENSATION / NO PER DIEM SPLIT*

Description:
The Project Engineer position is for engineers with five or more years of component and system level design and development experience. This individual should also be considered a technical expert in the design, development and regulatory approval of aircraft systems. This individual should be capable of proposing new technology and/or program directions in support of business unit objectives, as well as to provide technical consultation to Management. This position level is expected to impact business level objectives. Selects engineering techniques to solve problems and make design recommendations.

-Bachelors required
 
Job Number: 10320
Job Location: Phoenix, AZ
Rate: 43.00
Per Diem: No
Overtime: Possible
Duration: 7 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer (Aircraft Product Development)

Description:
The Primary Responsibilities of this position include: •Designing inflatable structures for aircraft evacuation systems and life rafts.
•Assisting in products transition from design to production.
•Designing, developing and improving new or existing Aircraft components.
•Directing the building and testing of prototypes.
•Directing compilation of manuals for customers on products.
•Assisting the Model Shop and/or Drafting.
•Performing analysis of components and systems.
•Performing financial analysis of a project's design components.
•Conceptualizing and preparing preliminary and final detail design and documentation of evacuation systems components and assemblies.
•Managing design process and revisions throughout initial testing.
•May be assigned limited responsibility for managing project obligations, such as management of technical documentation package for a product.
•Managing moderately complex/sized projects, hardware design, testing, processing, and projects, including foreseeing technical problems, resolving significant technical problems that may be directed to their expertise.
•Developing patentable material and/or to oversee large, business-critical projects. Participating as a team member in a specific phase of a broad engineering assignment.
•Preparing or directing preparation of appropriate documentation for assigned projects.
•Conducting Root Cause/Corrective Action Investigations
•Ensuring successful completion of the assigned project phase within the budgeted time and cost constraints.
•Participating in defining engineering approaches, and in planning and scheduling work.

Required: BS in Engineering from an accredited university
Preferred: MS in Engineering from an accredited university

Green or Black Belt Certified

Experience/Qualifications
(Basic) •Good interpersonal skills.
•Ability to multi-task and prioritize both daily issues and longer-term projects.
•Strong written and verbal skills.
•Good computer skills, MS Office.
•Good analytical skills.
•At least 5 years of product development experience. (3 years with master's degree)
(Preferred) •Experience with inflatable and machined component design.
•Experience as a project engineer through entire STC, PMA, and/or TSO projects
 
Job Number: 1910097142
Job Location: Phoenix, AZ
Duration: 10 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer - High Lift Systems

Description:
Currently looking for an experienced Project Engineer - High Lift Systems to fill an opening on a new aircraft project located in Rockford, IL. Interested candidates should preferably have 10+ years of experience in High Lift Systems (Flight Control Systems), especially, QT activities.



Responsibilities of the Project Engineer - High Lift Systems



Support Supplier Integration Team activities as a project engineer of Mechanical System Design Group for High Lift Systems for a new regional jet aircraft program.
Represent in a technical capacity and provide support for compliance test witnessing at partner/supplier sites and test Laboratory locations within U.S.
Provide Qualification and Partner Liaison Coordination Support for Flight Control Systems (High Lift Systems) components.
Develop and review Qualification Test Plans and Procedures jointly with Supplier for DO-160 and other tests, Review Qualification Test Reports, Similarity and Analysis reports.
Witness tests as a ‘Test Director” and report on environmental, functional and performance qualification test completion and results in accordance with engineering and quality processes and standards.
Provide support for test schedule development and tracking metrics and test coordination.
Provide support for component qualification technical issue resolution and tracking.
Prepare and issue agenda and status report of test activity.
Provide support for generation of Test Witness Record (TWR) when Regulatory Agency representatives from JCAB, FAA, EASA or Certifying Staff are present.
Provide support for Test Procedure deviation documentation as needed during test support.
Provide support for component qualification document deliverables tracking.
Support test failure case disposition/resolution and article tear down witness and reporting activities at supplier sites as required by technical teams.


Requirements

10+ years of experience in High Lift Systems (Flight Control Systems), especially, QT activities preferred.
Must have experience with life cycle development, test and qualification and certification documentation (QP, QTP, QTR, QSAR) of Electro Mechanical and hydraulically powered Equipment
Willingness to work long hours when requested by the Lead/Manager to support program needs.
Must have a positive, proactive attitude, and communicate effectively within a multidisciplinary work culture.
Be willing to learn, appreciate, and blend into Japanese work and business culture.
Must be able to travel as required to head office in Nagoya, Japan and Moses Lake Flight Test Center in Washington State as well as Supplier/Partner sites in U.S. to support test witnessing, component conformity inspections, workshops and technical interchange meetings.
 
Job Location: Rockford, IL
Overtime: Yes
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Lead - Repair Engineering

Description:
Project Lead - Repair Engineering
Contract-to-hire
Location: Kansas City, MO
Summary:
We are looking for a candidate to lead the engineering team in the accomplishment of repairs for in service aircraft and aircraft in heavy maintenance.
Duties will include providing guidance and helping develop less experienced engineering staff, provide technical coordination/expertise between the engineering team and the customer, and interacting with vendors and internal organizations. Applicant should have relevant airline, MRO, or OEM in-service support experience with proven leadership.
The individual will lead activities of engineering staff at the discretion of Engineering Management to complete tasks accurately while maintaining responsiveness in order to maintain aircraft, component, and engineering program schedules. Other duties will include development of proposals, assisting with planning and hiring, and other Engineering Management tasks.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
• Leads activities of direct Engineering staff at the discretion of Engineering Management to achieve accurate and timely completion of repairs and modifications during maintenance and component overhaul visits.
• Plans, reviews, organizes, and prioritizes engineering tasks to ensure Engineering completes tasks and maintains responsiveness in order to maintain aircraft, component, and engineering program schedules.
• Primary point of contact between customer representatives and/or internal customers to ensure consistent action in accordance with customer requirements.
• Mentor and train Repair Engineers from all levels of experience; identify and grow the expertise and experience of the team.
• Recognize and fully understand the proper use of all applicable customer, OEM, regulatory, and maintenance requirements, and ensure that these are met.
• Identify performance related issues and provides feedback to management.
• Coordinate and assist in implementing new policies and procedures within the Engineering department to help improve efficiency.
• Analyze and substantiate complex repair and modification designs using standard accepted industry practices. Produce technical analysis of repair standards and history for which FAA approval can be obtained to ensure compliance with all appropriate regulatory, customer, OEM, operations, and maintenance requirements.
• Review existing technical data, technical drawings, and previous history for entire airframe structure, mechanical / hydraulic systems and components, engine pylon/struts, and landing gear; in addition, some avionics, indication, lighting, and electrical systems are occasionally reviewed.
• Provide written technical accomplishment instructions for aircraft repairs or modifications to maintenance, customer, and regulatory authorities as necessary.
• Communicate technical details of repair or modification designs through technical writing and computer drafting functions.
• Independently evaluate, select, and adapt situations, and modify techniques, procedures and criteria to solve problems encountered.
• Approve engineering documents within authorized signatory level.
• Assist in interviewing and making hiring recommendations for new Engineering personnel.
• Participate in the development of work statements and hour estimates in support of proposals.
AUTHORITY:
The individual in this position may initiate technical instructions that are substantiated by data acceptable to or approved by the FAA and EASA or equivalent. For technical instruction pertaining to work accomplished on aircraft or components operated under CFR Part 91, 121, and 145, authority is as specified by the air carrier's procedures and/or Repair Station Manual.
SKILLS AND KNOWLEDGE:
• Experienced with OEM airframe, system, and interior design practices.
• Strong working knowledge of MyBoeingFleet and AirbusWorld for OEM datasets.
• Must be adaptable and flexible at all times and apply their knowledge and skills to develop creative solutions to a wide variety of unique design, modification, and repair problems encountered.
• Strong PC skills will include 3D Computer Aided Design proficiency (SOLIDWORKS or AutoCAD preferred), MS Office products (Word, Excel, PowerPoint, Visio and Project), and basic computer drafting skills.
• Ability to accomplish basic stress analysis and substantiation for complex repairs or modifications using standard accepted industry practices and other structural design methodologies.
• Ability to understand regulatory requirements for airworthiness, for the FAA and various foreign authorities (EASA, etc.) and include in engineering documents, drawings and designs.
• Ability to understand and apply the policies / procedures of all customer(s).
• Ability to understand and apply information from Structural Repair Manuals (SRMs), Aircraft Maintenance Manuals (AMMs), Illustrated Parts Catalogs (IPCs), Service Bulletins (SBs), Airworthiness Directives (ADs) and other aircraft reference materials.
• Ability to interpret and use aircraft manufacturing, assembly, and installation drawings.
• Excellent interpersonal and communication (written and verbal) skills with other groups (avionics, certification, Program Management and Maintenance Leads, MRO Facilities and customers) experience strongly preferred.
• Self-motivated and multi-tasker; able to level load own workload.
• Strong time-management, and problem-solving skills.
EDUCATION AND/OR EXPERIENCE:
Bachelor of Science (B.S.) degree in Aerospace, Mechanical, or Civil Engineering desired with a minimum of ten (10) years relevant aerospace experience or 15 years of equivalent aircraft design experience required.







____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 55916
Job Location: St. Louis, MO
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Mission Assurance Analyst 4 LA

Description:
164335
1743 Quality Mission Assurance Analyst 4 (Job Number: 19006863)

Number of Openings: 1

Location(s): United States-Louisiana-Lake Charles


Shift: 1st Shift

Target Start Date: Mar 25, 2019

Target End Date: Mar 27, 2020

Work Week: 4/10

Location: Lake Charles, LA

Duration: 1 Year (and potential to extend)


Hourly Rate: $52.50

Develop and implement program quality plans, programs, and procedures using statistical quality control statistics, lean manufacturing concepts, and six-sigma tools and analyses. Ensures that performance and quality products conform to established company and regulatory standards. Reviews, analyzes and reports on quality discrepancies related to assembly, process, mechanical, electrical and electro-mechanical systems. Investigates problems and develops disposition and corrective actions for recurring discrepancies. Interfaces with manufacturing, engineering, customer, vendor and subcontractor representatives to ensure requirements are met. Recommends corrective actions, dispositions and modifications.

Basic Qualifications:

6 Years with Bachelors; 4 Years with Masters


Preferred Qualifications:

Extensive knowledge in production quality assurance is preferred.

Working knowledge and understanding of MES

Aircraft and structures experience is a plus
 
Job Number: MB-1743ATO
Job Location: Lake Charles, LA
Rate: 52.50/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Reliability & Maintainability Engineer

Description:
Description
Support daily event entry into the Failure Reporting, Analysis & Corrective Action System (FRACAS) database via review of operations, test logs and NAVAIR maintenance databases; capture event evidence via interviews with maintainers, pilots, Marine maintainers, photos, test/data logs, etc. Ensure tagging/isolation of parts for Root Cause /Corrective Action analysis via working with Quality and IPT members and to ensure proper component disposition prior to return to Supplier / Sikorsky. Support daily updates of parts status and management process to ensure timely root cause analysis and return to supply chain.

Support daily joint preliminary-scoring with NAVAIR team members. Must be comfortable building relationships with customer and hourly-workforce.

Experience/Background:
A.S. degree in Mechanical, Electrical or Aerospace Engineering, preferred but not required and may be waived if candidate has sufficient practical experience, such as the following:
• Military maintenance background on H-53 aircraft is preferred.
• Previous commercial or military aircraft maintenance
• Previous experience in aircraft test operations support.
• R&M FRACAS, failure analysis experience preferred, but is not required.

Other skills required:
• Must be a self-starter and work independently, requiring a minimum of supervision.
• Must be comfortable building relationships with customer and hourly-workforce.
• Must possess skill level capable of performing tasks required to support the FRACAS program.
• Must possess excellent written and oral communication skills.
• Computer familiarity with Microsoft Word, Excel, PowerPoint, Picture Manager (or similar photo imager tool) and Outlook.
Position may require some overtime and/or support of second or third shift and/or occasional weekends in support flight test and maintenance schedules.
 
Job Number: MD47801
Job Location: Patuxent River, MD
Rate: 60.00
Per Diem: Possible
Overtime: Possible
Duration: 18 months
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Bill Carriveau
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Reliability Engineer

Description:
West Palm Beach, Fl or Pax River, Md or Stratford, Ct locations

The Reliability & Maintainability (R&M) Department is looking for a talented Engineer to provide technical support for the CH-53K Helicopter development program.
The successful candidate will serve as a subject matter expert to enable the program to translate field and repair data into actionable analysis.
The individual will work as a member of an Integrated Product Team to influence design, support detailed analysis on events that occur during Development/Flight Test data for assigned IPTs; support trending analysis, Root Cause and Corrective Action investigation, development and implementation tracking.
The individual will also provide event scoring and Corrective Action Factor development/justification and support development of reporting CDRLs, growth curves and other R&M analyses (predictions, FMECA, etc.).

Candidate may also support daily event entry into the Failure Reporting, Analysis & Corrective Action System (FRACAS) database via review of operations, test logs and NAVAIR maintenance databases; and capture event evidence via interviews with maintainers, pilots, Marine maintainers, photos, test/data logs, etc. Candidate may support daily joint preliminary-scoring with NAVAIR team members.

The candidate should be capable of performing quantitative reliability, maintainability and direct maintenance cost predictions, system fault tolerance assessments, Failure Mode and Effects Analyses (FMEA), Fault Tree Analysis (FTA) and maintainability timeline evaluation. Work as part of the aircraft platform Integrated Product Team (IPT) in support of Failure Reporting and Corrective Action System (FRACAS) efforts.

A course of study with emphasis on numerical analysis and statistics, with knowledge of aeronautical systems, is desired.

Candidate should possess excellent written and oral communication ability and must be a self-starter that requires a minimum of supervision.

Computer familiarity with Microsoft Word, Excel, PowerPoint, Picture Manager (or similar photo imager tool) and Outlook. Experience with Relex/CAFTA, Raptor, WeibullSmith, Hyperion or other data query tools is preferred, but not required.

A&P license and/or military aviation maintenance background is highly desirable.

Experience in interpreting operation sheet instructions, engineering drawings and specifications as well as familiarity with Client Flight Test processes is preferred.

Knowledge of Client products, information systems and Overhaul and Repair procedures is desirable. Experience supporting CH-53K development and flight test is preferred.
 
Job Number: 48036
Job Location: West Palm Beach, FL
Duration: 18 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Rick Nussbaum
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Reliability and Maintainability Engineer

Description:
We are seeking a highly organized individual with excellent communication skills to fill a Reliability and Maintainability Engineer role here in Moses Lake, WA in support of a new aircraft program. The Reliability and Maintainability Engineer responsibilities include but are not limited to:
Collect, analyze and score Failure Reporting, Analysis Corrective Action System (FRACA) data.
Perform Root Cause Analysis (RCA), Engineering Investigations (EI) and develop Corrective Action Plans (CAP) for failed aircraft components.
Perform Failure Modes, Effects and Criticality Analyses (FMECA) and testability assessments including fault detection and fault isolation.
Estimate man-hours and elapsed hours for maintenance actions.
Formulate reliability analyses and predictions including development of failure rate estimates.
Assess maintainability analysis using digital mockup.
Assist in developing troubleshooting procedures and guiding maintenance personnel in the performance of troubleshooting as a result of flight squawks during flight test.
Evaluate flight test campaign events and prioritize them.
Review the events and evaluate impacts for R&M which means impacts for airline fleet (Dispatch Reliability and Maintenance Cost etc.).
Coordinate with reliability team troubleshooting members and maintenance team to perform root cause analysis and make feasible countermeasures.
Conduct detailed investigations for priority issues and root cause analysis through coordination with related team members (Engineering, Maintenance and Flight Test Team etc.).
Propose feasible countermeasures with engineering and promote their implementation.
Prepare periodic reports on priority reliability and maintainability issue and the status of proposed countermeasures.


Requirements
BS Degree in Engineering/Mathematics
7-10+ years experience in field a plus
Position also requires experience with or knowledge of the following:
Failure Reporting, Analysis and Corrective Action Systems (FRACAS)
Reliability Program Plans
Reliability Predictions and Analysis
Failure Modes, Effects and Criticality Analysis (FMECA)
Maintainability Analysis and Prediction
Application of probability and statistics to support decisions regarding sample size, burn-in life testing and failure analysis investigations
Complete competency with Microsoft Word, Excel and PowerPoint
Good written and oral communication skills
Strong interpersonal skills especially across cultures
Ability to work in a fast-paced, collaborative team environment
Demonstrated ability as a team player to build consensus among peers and build effective relationships with team member.
 
Job Location: Moses Lake, WA
Per Diem: Possible
Overtime: Yes
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
SENIOR ENGINEER

Description:
Senior Engineer



Summary: Working with minimal supervision this individual will be responsible for the design and development of environmental control system products and / or systems for aerospace applications. May work directly with customers and provide both technical and project leadership to internal and external resources.



Essential Duties and Responsibilities include the following:


  • Performs engineering assignments with limited supervision.

  • Assesses customer requirements and develops designs, or provide design direction, to meet requirements.

  • Prepare program plan and effectively identify and manage program risks.

  • Analyze problems and makes decisions on proper action to be taken.

  • Responsible for completion and accuracy of engineering documentation.

  • Prepares and presents design data in support of internal and Customer design reviews.

  • Support DFX (Design for Cost, Manufacturability, Reliability, etc.) efforts.

  • Prepares Development and Qualification Test Plans, Procedures and Test Reports.

  • Monitors and controls program cost and schedule.

  • Supports existing products.

  • Makes recommendations for design, cost, or process improvements including substantiating strategy.

  • Provides technical direction and advice to Business Development, Manufacturing and Quality organizations.

  • Performs assignments broad in nature requiring substantial ingenuity and originality usually acquired through industry experience. These assignments may involve:

  • Sophisticated product and technology development.

  • Rigid timetables and short lead schedules

  • Extensive planning and interaction with many support groups and departments.

  • Complex report writing and detailed testing for customer or regulatory approval.

  • Provides leadership to support personnel and less experienced engineering team members

  • Assists in planning and coordination with support groups.

  • Reviews project status, makes recommendations where necessary and instructs in details unique to industry.

  • May perform supervisory duties (train, mentor, evaluate, etc.) for departmental employees on specific tasks or projects.

  • Assists Business Development Department in proposal preparation and customer presentations; interacts with customers and suppliers on technical and program matters.

  • Communicates status accurately and regularly to Management, recommending solutions for problems encountered.

  • Assists Manager in departmental planning and operations.


QUALIFICATIONS


  • B.S. Degree in Engineering

  • 7 years' experience in design, development, qualification and production support of aerospace components.

  • Specific experience in aircraft environmental controls systems and components is highly desirable.

  • Excellent report-writing skills, presentation and customer interface skills.

  • Strong knowledge of CAD design and analysis tools.

  • Proficient in the use of MS Office software, experience with MS Project a plus.

  • Knowledge and experience of DO-160 / MIL-STD-810 requirements




Travel: Periodic travel required to support customer onsite meetings and reviews, both domestic and international.



Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-01294
Job Location: Seminole, OK
Rate: 0.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-01-10 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Kristy Thompson
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
SR Systems Manager

Description:
General Description:

The successful candidate will be responsible to manage the System Engineering team. Particular emphasis is placed upon the development of commercial avionics equipment including: software defined radios, audio equipment, communication/navigation, connected aircraft, airborne servers, transponders, and similar hardware. This role will be required to support the future growth of the business by leading and designing new products and by driving the continuous improvement of existing products. The manager will be a key interface into the Product Line Management team and a technical interface for customers. The manager must be able to perform Systems Engineering tasks/documents, as well as manage a team of engineers.



Key/Core Qualifications:

Shown ability to develop system level designs
Proven ability to manage a System Engineering Team to develop new product designs and sustainment objectives
Experience with DO-178B development, DO-254, and DO-160 Qualification Testing
Understanding of DO-186, APCO Project 25, TIA-102
Experience with the following System level activities:
Developing System level architectures
Translate/create customer/industry/market requirements to system level requirements
Allocate system level requirements into hardware and software requirements
FMEA and safety analysis
Timeline/latency analysis
Creation of Interface Control Documents
Perform trade studies
System level verification & verification
Experience with developing a standard development process within the team
Experience interfacing with customers
Experience with customer and/or FAA audits
Design experience of software defined mission/tactical radios, on-board avionic computing platforms/servers, and/or Com/Nav designs
Manages to schedules and metrics
BS EE or equivalent.
15+ years of experience in avionics development
5+ years formally managing a systems development team


Preferred Qualifications:

Ability to coordinate and manage Bid and Proposals (ROMs, RFI, RFP, etc)
Ability to develop system level designs and mature them through appropriate R&D efforts
Experience transitioning new products into the factory
Experience interfacing with the factory and a Repair & Overhaul organization to support sustaining products
Experience with Requirement Management tools
Ability to create, implement, and/or modify engineering processes
Understanding of Design-to-Cost and Design-for-Manufacturability
RF design knowledge
Software Defined Radio waveform definition
Commercial encryption knowledge (AES, DES, P25, Tetra, etc)
RTOS experience
Able to interface with the business development team to support/create product line roadmaps
Knowledge of the following technologies/skills is a plus:
3G/4G LTE, WiFi, Bluetooth, Codec, DSP, touch screen displays, Mesh radio’s, IMA/MAU/Card file designs, and human factors
General Avionics or helicopter pilot experience
1111
 
Job Location: Prescott, AZ
Rate: $130-150K+
Per Diem: No
Overtime: NO
Duration: PERM
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: GREENLIGHT PROFESSIONAL SERVICES
Attention: Jason
Address: 319 LITTLETON RD STE 308
City, State: WESTFORD, MA 01886
800 Phone: 877/562-4477
Website: www.gpsnational.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
SR.ELECTRICAL ENGINEER

Description:
SENIOR ELECTRICAL ENGINEER  

An Oklahoma based aerospace engineering and manufacturing company of aircraft environmental control systems is seeking a Sr. Electrical Engineer.



RESPONSIBILITIES:


  • Research, develop, design, model and certify analog/digital circuits for use in brushless motors.

  • Devise new approaches to problems encountered, assists technical personnel in execution of drawings, perform technical studies and evaluations. 


REQUIREMENTS: 


  • At a minimum a Bachelor's Degree in Electrical Engineering and analog/digital design experience 

  • 5+ related work experience

  • The ability to work well in a team environment, to trouble shoot, teach or learn about the designs. 

  • Exercise independent judgment to develop designs with minimal direction and concurrently support multiple projects. 

  • The ability to communicate with other engineers and customer representatives to resolve design discrepancies and develop products.

  • Aerospace Industry experience a plus.


  

Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
 
Job Number: 19-00245
Job Location: Seminole, OK
Rate: 120000.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-01-03 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Kristy Thompson
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sikorsky Account Manager

Description:
We are seeking a well seasoned, former Engineering or Supply Chain employee of Sikorsky who has a developed network. Gear system design and manufacturing experience is preferred but not mandatory. Advanced Programs experience is desired.

Sikorsky experience is REQUIRED.

This position will be a part-time opportunity, requiring approximately 10 hours per week onsite in Stratford, CT.

The Company seeking candidates for this role is a Design-to-Specification and Make-to-Print manufacturer of Gears, Shafts, Housings and fully Integrated Gearboxes for aircraft turbine engines and rotary wing aircraft Dynamic Systems. The Company is highly experienced and successful in development and manufacture of prototypes of such components.

The scope of work envisioned for the candidate has proven in previous engagements to include the following:
- Appropriate use of personal knowledge and established contacts within Sikorsky to assist in identifying and establishing dialog with key personnel relevant to New Program Dynamic System design and development.
- Appropriate use of personal knowledge in the dis-ambiguation of program documentation, communications and situations.
- Occasional brokering of meetings for Company Personnel with our client's Personnel
- Occasional assistance with arrangement of individual and Company Team visits to our client site
- Occasional assistance with Company personnel visit logistics
- Occasional travel for assistance with meetings at Company’s facility


____________________________________________________________________
Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 55862
Job Location: Stratford, CT
Rate: Open
Per Diem: No
Overtime: No
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Job Description:
Typical duties include backup of critical systems and data, restoration of accidentally deleted files, restoration of systems on a variety of hardware and software, administration of user accounts on servers running various operating systems, and maintenance and development of scripts in various languages and shells such as Apex Scripting language, bash, ksh and csh, and Windows batch files. Work with various technical support organizations to solve problems requiring outside assistance. Troubleshoot and configure networks, and switches. Install software and operating systems, configure, update and repair computers and servers as needed. Maintains and operates the Flight Engineering simulator which is made up of several computers and tablets running Windows 10 and two computers running SUSE linux.

The applicant should have a strong background in Unix and should have experience with the following hardware, operating systems and software.
Hardware: M5000 Oracle Sun server with 24 disk Fiber disk array, iHawk Simulation Servers with Real Time Clocks, Charon Virtual VAX hosted on Windows server 2008, Hardware Firewall, Large Uninterruptible Power Supply units, 400HZ Power supply for Aircraft simulations, 1553 bus and Ethernet networks, LTO-5 Tape Library
Operating Systems: Solaris 10 SPARC 64, Windows NT, XP, 7, 10, Windows server 2008, VMS 6.2, DOS 3.3, Redhat Linux 5.2.5, RedHawk RTOS 5.2, SUSE, WindRiver VxWorks
Software: Opentext Exceed, OpenText NFS Maestro, Git, GnatPro Ada, Microsoft Office, PowerTerm, Putty, ClearCase, ClearQuest, DOORs, Apex on Solaris (Ada development environment), Rsync, Acronis True Image, Beyond Compare, FlexLM license Manager on Unix and Windows, VLC, PASS3200 1553
 
Job Number: SE2018
Job Location: Fort Walton Beach, FL
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6 mon
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Shailendra Mishra
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Software Engineer

Fort Worth, TX
$67.23/hr
1 year W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
*REQUIRES AN ACTIVE SECRET CLEARANCE*

Description:
-Individual will perform software development and integration for distributed, real-time simulation systems that include a mix of aircraft software and simulation software.
-These systems represent an extensive selection of simulators and software/systems integration test capabilities, including low-cost rapid prototyping concept development systems, full-dome handling qualities simulations, high-fidelity multi-ship, real-time, man-in-the-loop simulation systems, and hardware-in-the-loop mission systems and vehicle systems integration venues.
-In a fast-paced, multi-disciplined research and development environment.

Responsibilities include (1) real-time simulation software design and development and (2) software integration and test. Some requirements analysis, system verification and validation may also be required.
-Bachelors degree required

ADA - 1-2 years preferred
C++ - Advanced Level - 6 + Years preferred
Linux - 4 - 6 Years preferred
Modeling - 4 - 6 Years preferred
OO Design - 6 + Years preferred
OO Programming - 6 + Years preferred
Real Time - 4 - 6 Years preferred
Simulation - 4 - 6 Years preferred
 
Job Number: 10298
Job Location: Fort Worth, TX
Rate: 67.23
Per Diem: Split Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Software Engineer

Marietta, GA
$70.57/hr
1 year W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
*REQUIRES AN ACTIVE SECRET CLEARANCE*

Description:
-Individual will perform software development and integration for distributed, real-time simulation systems that include a mix of aircraft software and simulation software.
-These systems represent an extensive selection of simulators and software/systems integration test capabilities, including low-cost rapid prototyping concept development systems, full-dome handling qualities simulations, high-fidelity multi-ship, real-time, man-in-the-loop simulation systems, and hardware-in-the-loop mission systems and vehicle systems integration venues.
-In a fast-paced, multi-disciplined research and development environment.

Responsibilities include (1) real-time simulation software design and development and (2) software integration and test. Some requirements analysis, system verification and validation may also be required.
-Bachelors degree required

ADA - 1-2 years preferred
C++ - Advanced Level - 6 + Years preferred
Linux - 4 - 6 Years preferred
Modeling - 4 - 6 Years preferred
OO Design - 6 + Years preferred
OO Programming - 6 + Years preferred
Real Time - 4 - 6 Years preferred
Simulation - 4 - 6 Years preferred
 
Job Number: 10297
Job Location: Marietta, GA
Rate: 70.57
Per Diem: Split Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer - Clearance GA

Description:
163931
1313-1 Software Engineer
Work Location: Marietta, GA
Status: Open

Qty: 5
Desired Start Date: 1/16/2019
End Date: 3/8/2020

Job Description:
Individual will perform software development and integration for distributed, real-time simulation systems that include a mix of aircraft software and simulation software. These systems represent an extensive selection of simulators and software/systems integration test capabilities, including low-cost rapid prototyping concept development systems, full-dome handling qualities simulations, high-fidelity multi-ship, real-time, man-in-the-loop simulation systems, and hardware-in-the-loop mission systems and vehicle systems integration venues in a fast-paced, multi-disciplined research and development environment.
Responsibilities include:
(1) real-time simulation software design and development and
(2) software integration and test.
Some requirements analysis, system verification and validation may also be required.

Region: Marietta, GA
Level: Level 4: BS+11 YRS or MS+9 YRS
Pay Rate: $69.00 Hourly

Skills:
Software Skills ADA No 6 1 - 2 Years
Software Skills C++ - Advanced Level No 1 6 + Years
Software Skills Linux No 4 4 - 6 Years
Software Skills Modeling No 8 4 - 6 Years
Technical Skills OO Design No 7 6 + Years
Technical Skills OO Programming No 2 6 + Years
Technical Skills Real Time No 5 4 - 6 Years
Technical Skills Simulation No 3 4 - 6 Years
 
Job Number: JE-1313-1S5
Job Location: Marietta, GA
Rate: 69/hr max
Per Diem: no
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer - Clearance TX

Description:
163932
1312-1 Software Engineer
Work Location: Fort Worth, TX
Status: Open

Qty: 10
Desired Start Date: 2/4/2019
End Date: 3/27/2020

Job Description:
Individual will perform software development and integration for distributed, real-time simulation systems that include a mix of aircraft software and simulation software. These systems represent an extensive selection of simulators and software/systems integration test capabilities, including low-cost rapid prototyping concept development systems, full-dome handling qualities simulations, high-fidelity multi-ship, real-time, man-in-the-loop simulation systems, and hardware-in-the-loop mission systems and vehicle systems integration venues. n a fast-paced, multi-disciplined research and development environment.

Responsibilities include:
(1) real-time simulation software design and development and
(2) software integration and test. Some requirements analysis, system verification and validation may also be required.

Region: Fort Worth, TX
Level: Level 4: BS+11 YRS or MS+9 YRS
Pay Rate: $65.74 Hourly OT40

Skills:
Software Skills ADA No 6 1 - 2 Years
Software Skills C++ - Advanced Level No 1 6 + Years
Software Skills Linux No 4 4 - 6 Years
Software Skills Modeling No 8 4 - 6 Years
Technical Skills OO Design No 7 6 + Years
Technical Skills OO Programming No 2 6 + Years
Technical Skills Real Time No 5 4 - 6 Years
Technical Skills Simulation No 3 4 - 6 Years
 
Job Number: JE-1312-1S5
Job Location: Fort Worth, TX
Rate: 65.74/hr max
Per Diem: no
Duration: 13 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr Technical Writer

Description:
Sr Technical Writer is directly responsible (either individually or with other team members) for the development of technical publications. This can include special projects, research and development, and aircraft safety-related content. Support the complete workflow process to ensure successful development and revision of technical publications. Comply with established quality processes to ensure accuracy, ease of use, and timely delivery of content. EWIS (Electrical Wiring Interconnection System) best practices, S1000D Technical Publication Specification, STE (Simplified Technical English), and PLM (Product Lifecycle Management) database experience desired.


Principle Duties and Responsibilities:

Sr Technical Writer with minimal to no supervision, use aircraft technical data to develop technical content that provides the information necessary for efficient return to service of the aircraft. 2. Conduct reviews, analysis, and modification of technical documents to gain a thorough understanding of complex aircraft system operation. 3. Provide training support on complex system operation and technical publications software and processes. 4. Participate with publications team to ensure department workflows and business processes are followed. 5. Proactively conduct discussions with internal/external customers in the development of source data, making sure it meets technical publication requirements. 6. Directly collaborate with Research and Development, Production, Completions Center, and Customer Support personnel to develop, review, and approve technical procedures. 7. Provide process improvement recommendations to leadership that can reduce overall department cost and/or increase productivity. 8. Contribute to development and continuous improvement of department styles, standards, operating procedures, and priorities. 9. Provide input to leadership on new processes or technology to enhance the Technical Publications business model. 10. Assist in the development of solutions to resolve technical data challenges. 11. Collaborate with leadership, team members, and other departments to develop/implement special projects. Perform other duties as assigned.

Sr Technical Writer has extensive knowledge of aircraft system methodology gained through practical experience is required. 2. Strong technical writing and communication skills are required. 3. Ability to read and interpret engineering data is required. Experience with 3-D data is desired. 4. Thorough knowledge of aircraft/hand tools, test equipment, parts nomenclature, maintenance procedures, and aircraft equipment (obtained through experience, research, or training) is required.
Education and Experience Requirements:
Bachelor's Degree or equivalent experience in the authoring of technical publications required. Four (4) years of technical publications experience, to include using industry standards to develop/revise technical documents in word processing applications. Knowledge of basic aircraft system methodology or equivalent technology is required. Proficiency in computer technology/software and typing skills is required. An A&P license and 4 years of related aircraft experience in addition to the four (4) years technical publications experience may offset the degree.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Manufacturing Engineer

Description:
SENIOR MANUFACTURING ENGINEER


DYNAMIC & GROWING OKLAHOMA BASED MANUFACTURER OF AIRCRAFT ENVIRONMENTAL CONTROL SYSTEMS IS SEEKING A SENIOR MANUFACTURING ENGINEER



RESPONSIBILITIES:


  • Develope and maintaining processes and procedures which insure product conformity

  • Evaluate processes and identify areas of improvement such as labor, material and reliability

  • Create manufacturing and assembly drawings when applicable

  • Create and control sketch drawings for production and purchasing

  • Interact with production to resolve assembly and test problems and identify and develop assembly tool needs


QUALIFICATIONS:


  • BS in Mechanical or Aero Engineering required

  • Minimum 5 years' experience required in manufacturing or quality related position

  • Auto Cad/Inventor training

  • Excellent verbal, writing and communication skills






Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-01114
Job Location: Seminole, OK
Rate: 100000.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-01-09 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Kristy Thompson
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Mechanical Engineer - Aero

Description:
SR. MECHANICAL ENGINEER

An Oklahoma based aerospace engineering and manufacturing company of aircraft environmental control systems is seeking a Sr. Mechanical Engineer.



Working under the guidance of an engineering manager, staff engineer or senior level engineer, this individual will be responsible for supporting product development programs for aerospace environmental control system applications.



RESPONSIBILITIES:


  • Component and / or system design development, verification, validation, transition to production and continued sustaining support as required.

  • Performs project assignments under the direction of engineering manager, staff engineer or senior engineer.

  • Assesses customer requirements and designs projects to meet these requirements.

  • Analyzes problems or difficulties and recommends action to be taken.

  • Responsible for completion and accuracy of engineering documentation.

  • Prepares and presents design data in support of internal and Customer design reviews.

  • Support DFX (Design to Cost, Manufacturability, Reliability, etc.) efforts.

  • Prepares Development and Qualification Test Plans, Procedures and Test Reports.

  • Monitor and control project cost and schedule and effectively communication project status to stakeholders.

  • Supports existing products.

  • Makes recommendations for design, process or cost reduction improvements including substantiating tests and analysis.

  • Provides technical assistance to Business Development, Manufacturing and Quality organizations.

  • Maintains project files, ensures proper documentation per Company guidelines

  • Provides leadership to support personnel as required.

  • Assists in planning and coordination with support groups.

  • May directly supervise departmental employee (e.g. lab technicians)

  • Reviews project status, makes recommendations where necessary.

  • Assists Business Development Department in proposal preparation and customer presentations; interacts with customers and suppliers on technical and program matters.

  • Communicates status accurately and regularly to Management, recommending solutions for problems encountered. 

  • Performs miscellaneous duties as needed within Engineering Department.


     QUALIFICATIONS:


  •        Bachelor's degree in Mechanical or Aero Engineering

  •        5+ years' related work experience






Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
 
Job Number: 19-00247
Job Location: Seminole, OK
Rate: 115000.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-01-03 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Kristy Thompson
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Repair Engineer

Description:
Sr Aircraft Repair Engineer for After-Market Technical Services

Location: San Diego, CA

Duration: 12 months

JOB SUMMARY: Perform Damage Assessment and Prescribe Rework and Repairs to Aircraft Engine Nacelles

Qualifications: Must be able to perform each essential function and have education, skills & experience listed below.

Essential Functions & Responsibilities: Assess damage & defects to Turbofan Nacelle components & assemblies and prescribe Rework or Repair.

Education: Minimum Graduate of 2 year Associate Engineering degree in Mechanical or Aerospace or Civil or Structural technology.

Very Strong Preference: ABET approved Bachelor of Engineering in Mechanical, aerospace, civil structural.

Minimum Aero-structures Experience: 12 yrs for Assoc. Eng. / 10 Yrs for B.Eng. / 8 yrs for M.Eng. / 5 Yrs for PhD Eng.

Highly Preferred but Not Mandatory Experience:

Experience in aircraft industry after-market services and repairs serving airline customers.
Propulsion system related experience with nacelles, engine mounts, Inlets, Thrust Reversers, Exhausts, Fan Cowls.
Experience writing dispositions for damage rework & repair: Hail, bird-strike, lightning, corrosion, cracks, dents, de-lams.
Clear intuitive understanding of load path and design intent of structural parts and aircraft internal loads.
Personal and Interpersonal Skills

Strong interpersonal skills with willingness to ask questions & dig for answers. High degree of collaboration is expected.
Demonstrated ability to multitask with strong task orientation and attention to critical details required under pressure.
Ability to work independently, be insightful, resourceful & innovative and willing to do whatever work is assigned.
Great verbal & written communication skills with strong command of English language and Simplified Technical English.
Preferred But Not Mandatory Software Skills: Basic CATIA V5, Team Center, MS Word, MS Excel, MS PowerPoint, MS Access, MS Dynamics



____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status
 
Job Number: 56289
Job Location: San Diego, CA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12 months
Start Date: 3/15/19
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sress Engineer

Description:
Aircraft Interiors,Need to know FEMAP
 
Job Number: 10
Job Location: Mid West
Rate: Open
Per Diem: Yes
Overtime: Some
Duration: 6+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: ADDITIONAL TECHNICAL SUPPORT INC
Attention: Brian Ross
Address: 33 RIVERSIDE DR STE 102
City, State: PEMBROKE, MA 02359
800 Phone: 877/871-0785

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Analysis Engineer

Description:
Plans and organizes structural analysis work at the program level to assure total compliance with structural integrity and stability requirements. Develops, integrates and documents complex or unique structural requirements to establish the system design. Coordinates with other engineering groups to establish the product''s environment. Guides product design and verifies structural integrity by defining requirements for development of analytical methods, finite element models/simulations and other analysis tools to develop the structural environment, characteristics and performance of the product. Works with customers and regulatory agencies to define certification processes that will ensure requirements are met. Reviews and approves certification results. Develops test plans and configurations, supports test execution and analyzes/reports test results to validate and verify systems and components meet requirements and specifications. Defines and organizes test programs to substantiate for customers and regulatory agencies that requirements are satisfied. Develops analytical processes/tools to improve effectiveness, quality and efficiency of the development effort. Investigates emerging technologies to develop future product designs to meet projected requirements. Works under consultative direction.

This position requires broad traditional structural analysis skills ranging from very good hand calculation skills to finite element modeling skills and also requires significant experience in fatigue analysis, durability and damage tolerance of mainly aircraft primary and secondary metal structure. Both military and commercial Boeing aircraft experience is a definite plus as well as familiarity with applicable MIL and Boeing aircraft design/analysis specifications.

Bachelor's degree with 14 or more years' experience, Master's degree with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study in engineering, computer science, mathematics, physics or chemistry.
 
Job Number: SA_OK2019
Job Location: Oklahoma City,, OK
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 8 mon
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Shailendra Mishra
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Analysis Engineer

Description:
Location: Savannah, GA
Rate: $72.00/HR
Duration: Long Term
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

**MUST be a U.S. Citizen or Permanent Resident**

Responsibilities:
- Candidate will be performing structural analysis of company interior monuments using FEA and classical hand analysis.
- Responsibilities will include both the analysis and certification documentation.

The ideal candidate will have experience in the following:
- Experience performing structural analysis on aircraft Interior Furnishings
- Use of finite element analysis for both primary and secondary structures
- MRB experience for both Primary and Secondary Structures
- Working with company delegated structural AR's in an ODA environment in support of new and unique STC certification of aircraft installations
- A working knowledge of FAR part 25 certification requirements
- A good understanding of a fast paced completion-style environment
- Working knowledge of FEMAP is required

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) ys in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principle Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
3. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering related field preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 10437
Job Location: Savannah, GA
Rate: $72.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Analysis Engineer - Interior Furnishings

Description:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

Unique skills:
• Required Candidate will be performing structural analysis of Gulfstream interior monuments using FEA and classical hand analysis.
• Responsibilities will include both the analysis and certification documentation.
• The ideal candidate will have experience in the following:
• Use of finite element analysis for both primary and secondary structures
• Working with company delegated structural AR's in an ODA environment in support of new and unique STC certification of aircraft installations
• A working knowledge of FAR part 25 certification requirements
• A good understanding of a fast paced completion-style environment
• Working knowledge of FEMAP is required

Responsibilities
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area


Education and Experience Requirements:
• Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Five (5) ys in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
 
Job Number: 24-356
Job Location: Savannah, GA
Rate: $68 to $75
Per Diem: Yes
Overtime: Yes
Duration: Long term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Analysis Engineer - Propulsion, Hydraulics or Engine Systems

Description:
Seeking a Stress Analysis Engineer that has experience working with aircraft mechanical systems including propulsion, hydraulics, or engines, etc.
Must have dynamics stress analysis experience
Must have BS degree

Experience working for Gulfstream, OR Piper, OR Honda Aircraft, OR Boeing, OR Sikorsky, OR Lockheed, OR Northrop, OR Textron, OR any commercial, executive, or helicopter company.

Experience with commercial aircraft (larger), OR experience with executive/sport/light aircraft (smaller), OR experience with helicopters. Experience with metallic, OR composite airframe. Must be capable of doing analyses using reference materials.
Nastran, Patran, or FEMAP.

The Structures Company is an AA/EOE.
 
Job Number: 280
Job Location: Manassas, VA
Rate: $80-$85/Hr.
Per Diem: Yes
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Analyst

Description:
Location: Savannah, GA
Rate: $79.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
1) A fundamental understanding of static stress analysis as it relates to sizing airframe structural repairs
2) Experience as a stress analyst in post-production environment or a production MRB stress engineer
3) Experience with airworthiness regulations in regards to major repairs or alterations of external airframe parts and components and the requirements to find compliance when analyzing a repair
4) The ability to effectively work with & support a multidiscipline team of engineers, mechanics, Tech Ops, Quality Control, upper management, etc.
5) Strong written and verbal communication and collaborative skills and the ability to effectively communicate the organization's position with external and internal customers
6) Practical hands on aircraft experience and problem solving

Preferred Skills:
1) Company engineering experience, e.g. G650, G500, G600.
2) Experience in fatigue analysis and damage tolerance analysis.
3) Experience in the repair and analysis of composite structure
4) Experience in repair and analysis of aircraft landing gear.
5) Experience in development of Structural Repair Manual (SRM) data.
6) Experience with foreign airworthiness regulatory agencies

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services

Principle Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
2. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 10434
Job Location: Savannah, GA
Rate: $79.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Analyst

Description:
Location: Savannah, GA
Rate: $74.00 - $80.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
- Static and fatigue analysis of primary and secondary airframe structure of metallic construction experience.
- Strong background in classical stress analysis.
- Experience with Catia V5 to support stress analysis and drawing release.
- Experience with reviewing 2D drawings.
- Ability to work independently under limited supervision.
- Experience with aircraft modifications and repairs (STC, MRB, or Service) preferred.
- Static analysis of composite structure
- Composite allowable testing and certification requirements.
- Experience with Patran/Nastran is a plus.
- Strong preference for engineers that enjoy working in a collaborative environment.
- Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.

Education and Experience Requirements:
- Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
- Five (5) years in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principle Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required. To be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
3. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 10299
Job Location: Savannah, GA
Rate: $74.00 - $80.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Analyst

Description:
Location: Palmdale, CA
Rate: $80.00 - $110.00/HR
Duration: 1 year contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Requirements:
- This position requires an Aircraft Stress Analyst to use their technical expertise to perform analysis of aircraft primary and secondary structure.
- The candidate will have a complete understanding of technical principles, theories and concepts in the field of aircraft structural analysis.
- The candidate will be expected to work independently with only general oversight and will be required to provide guidance to junior engineers.
- The candidate will be responsible for documenting work clearly and concisely.
- The candidate will also be expected to use their technical expertise to develop structural analysis methods and perform structural analysis of advanced composite structures.

Education:
- B.S. Degree +16 YRS of experience or M.S. Degree +14 YRS of experience.
- Candidate must have working knowledge/experience with FEM software (Nastran or Abaqus), Computer Aided Design software (CATIA V5), and other pre/post processor software (Slim, Vision, etc.).
 
Job Number: 9732
Job Location: Palmdale, CA
Rate: $80.00 - $110.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Analyst - Structural Repair

Description:
A fundamental understanding of static stress analysis as it relates to sizing airframe structural repairs. Experience as a stress analyst in post-production environment or a production MRB stress engineer. Experience with airworthiness regulations in regards to major repairs or alterations of external airframe parts and components and the requirements to find compliance when analyzing a repair 4) The ability to effectively work with & support a multidiscipline team of engineers, mechanics, Tech Ops, Quality Control, upper management, etc. Strong written and verbal communication and collaborative skills and the ability to effectively communicate the organization's position with external and internal customers. Practical hands on aircraft experience and problem solving The following unique skills are preferred: Experience in fatigue analysis and damage tolerance analysis. Experience in the repair and analysis of composite structure. Experience in repair and analysis of aircraft landing gear. Experience in development of Structural Repair Manual (SRM) data. 6) Experience with foreign airworthiness regulatory agencies
 
Job Number: 19-134273
Job Location: GA
Rate: $58.00
Per Diem: Split
Overtime: Possible
Duration: Year +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineer

Description:
Performs stress reviews and analysis of aircraft interior, system and structural installations. Determines critical loads and substantiation path for installations, assemblies and details.

Duties: Review engineering drawings for structural integrity and compliance with FAA regulations; Completes stress analysis documents to show compliance to FAA regulations; Works to budgets and project schedules; Utilizes classical hand analysis methods and Finite Element Modeling techniques; May perform as functional “Lead” for stress team on specific project(s).
 
Job Number: 19-1104
Job Location: WA
Per Diem: Split
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineer

Description:
Static and fatigue analysis of primary and secondary airframe structure of metallic construction experience. Strong background in classical stress analysis. Experience with Catia V5 to support stress analysis and drawing release. Experience with reviewing 2D drawings. Ability to work independently under limited supervision. Experience with aircraft modifications and repairs (STC, MRB, or Service) preferred. Static analysis of composite structure. Composite allowable testing and certification requirements. Experience with Patran/Nastran is a plus. Strong preference for engineers that enjoy working in a collaborative environment. Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.
 
Job Number: 19-652-141903
Job Location: Southeast
Per Diem: Yes
Overtime: Possible
Duration: Possible Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineer

Description:
Stress Engineer assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services


Stress Engineer does Static and fatigue analysis of primary and secondary airframe structure of metallic construction experience. • Strong background in classical stress analysis. • Experience with Catia V5 to support stress analysis and drawing release. • Experience with reviewing 2D drawings. • Ability to work independently under limited supervision. • Experience with aircraft modifications and repairs (STC, MRB, or Service) preferred. • Static analysis of composite structure • Composite allowable testing and certification requirements. • Experience with Patran/Nastran is a plus. • Strong preference for engineers that enjoy working in a collaborative environment. • Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.

Principle Duties and Responsibilities:

Stress Engineer contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area
Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) is in specific technical discipline or ten (10) yrs. broad Eng. experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters, 4 yrs. for PhD in fields applicable to this job.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineer

Description:
Seeking an Airframe Stress Engineer who will be responsible for all aspects of structural integrity and implementing long-term roadmap on stress methods development. This position will initially be located in our Reno, NV, headquarters and report directly to the Structures Manager.

Qualifications:
• Build and Lead team developing stress analysis methods and tools for AS2 aircraft design and certification.
• Thorough understanding of latest structural static, durability and damage tolerance requirements for Part 25 certification.
• Develop roadmap for structures team - in partnership with Tier 1 supplies and Partners – in the areas of analysis methods, tools and failure criterions for the entire aircraft.
• Support IPT leads in development of the PSP, PSCP, issue papers, and other certification documents.
• Knowledge of the conceptual and preliminary design phases of aircraft development is strongly preferred
• Provide input to maintenance program, inspection intervals and inspection methodologies.
• Support new business development, trade studies and proposal activities.
• Support design reviews with IPT teams and partners/suppliers.

Requirements:
• Must be either a US citizen, a US permanent resident (a “US Person”) or a Canadian citizen.
• Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure / confidentiality agreement with current or any former employer that would prevent you from fully performing the duties of the position.
• Minimum Bachelor’s Degree in Engineering. Master’s Degree strongly preferred.
• 12+ years of experience in performing stress analysis, developing methods and performing validation testing for Part 25 aircraft components.
• 3+ years of experience in leading stress and/or structural integrity team.
• You must have demonstrated leadership capabilities.
• Demonstrated success in dealing and influencing internal and external stakeholders
• Strategic thinker with very strong decision making and communication skills.
• Highly self-motivated with a strong bias for action, and excellent problem-solving skills across multi-disciplinary skill sets.
 
Job Number: 42-012
Job Location: Reno, NV
Rate: DOE but competitve
Per Diem: YES
Overtime: YES
Duration: 1 year+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fatigue and Damage Tolerance Engineer

Description:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Unique Skills:
• Fatigue and Damage tolerance experience preferred on primary and secondary airframe metallic structure
• Strong background in classical stress analysis.
• Experience with Catia V5 to support stress analysis and drawing release.
• Experience with reviewing 2D drawings.
• Ability to work independently under limited supervision.
• Experience with aircraft modifications and repairs (STC, MRB, or Service) preferred.
• Experience with Patran/Nastran is a plus.
• Strong preference for engineers that enjoy working in a collaborative environment.
• Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.
 
Job Number: 24-313
Job Location: Savannah, GA
Rate: $74 - $80
Per Diem: YES
Overtime: YES
Duration: 1+ years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineer (FEMAP)

Description:
Ideal candidate will have experience in the following: Use of finite element analysis for both primary and secondary structures. Working with company delegated structural AR's in an ODA environment in support of new and unique STC certification of aircraft installations. A working knowledge of FAR part 25 certification requirements. A good understanding of a fast phased completion style environment. Working knowledge of FEMAP is required.
 
Job Number: 19-826
Job Location: TX
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineer / Stress Analyst with Nastran & Abacus (472)

Description:
*This is a 15 month contract position located in Palmdale, CA*

*No relocation is available, must have an active clearance to apply*

*On site position, per diem SPLIT is available for those out of town*


We are seeking a contract flight vehicle (fixed or rotary wing) stress / structural analyst who will be working on aircraft and or missiles applying knowledge to dynamics and stress of flight upon vehicles.

Candidate will be testing, analyzing, and modifying existing aircraft and integrating modified components into airborne vehicles. The applicant will be a lead analyst, and as such, in addition to normal stress analysis duties, will also will analyze and write documentation using military specifications, internal structural manuals, developing working models, etc.



Required:

*Current Active Secret Clearance; Requires applicants to be US Citizens
*8+ years’ experience in stress/structural analysis of aircraft using FEM (Nastran or Abacus).

*Knowledge of SLIM or VISION.
*Good FEA and FEMAP skills.
*4 year engineering degree in ME, aerospace or equivalent
 
Job Number: 472
Job Location: Palmdale, CA
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineers / Stress Analysts Needed

Description:
Airframe stress analysis and sizing of major aircraft structural components for CFR 14, Part 25 and EASA CS-25 certification.
Support internal loads development and coordination of airframe stiffness updates between major structural components/suppliers.
Support development of analysis methods and tools for design/manufacture/testing/certification.
Support Tier 1 Supplier/Partner analysis and oversight of methods.
Support design reviews and model releases for all structural interfaces within an IPT environment.

Requirements:
Must be a US or Canadian citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772.
8+ years of experience in performing stress analysis, developing methods or performing validation testing for Part 25 aircraft components.
Must have a bachelor’s degree in Aerospace or Mechanical Engineering, or similarly related area.
Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure / confidentiality agreement with current or any former employer that would prevent you from fully performing the duties of the position.
Knowledge of the conceptual and preliminary design phases of aircraft development is strongly preferred.
Knowledge of structural static, durability and damage tolerance requirements for Part 25 certification strongly preferred.
Highly self-motivated with a strong bias for action, and excellent problem-solving skills across multi-disciplinary skill sets.

The Structures Company, LLC is an AA/EOE.
 
Job Location: Reno, NV
Rate: Open
Per Diem: Yes
Overtime: Possible
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer 3 / FEMAP / Nastran / no clearance CA

Description:
Structural Analysis Engineer 3 (Job Number: 18026724)

Number of Openings: 1

Location(s): United States-California-El Segundo


Shift: 1st Shift

Target Start Date: Feb 4, 2019

Target End Date: Jan 31, 2020

Pay rate: $54.00

Schedule: 9/80 A

Location: El Segundo, CA

Duration of assignment: Up to 1 year

Aerospace Systems located in El Segundo, CA has an opening for a Contract Structural Analysis Engineer. The selected candidate will perform structural analysis on metallic and composite airframe structures.

Essential Functions:

• Develop solutions to difficult problems that are thorough, imaginative, practical, and consistent with program objectives.
• Coordination and clear communication with other disciplines during the development of design solutions.
• Evaluation of engineering products for conformity to standards, procedures, and specifications.


Basic Qualifications:

• BS degree in Engineering (Aerospace, Mechanical, or Civil) and a minimum of 5 years of experience in Aerospace structural analysis or MS degree in Engineering (Aerospace, Mechanical, or Civil) with 3 years of experience.
• Experience in Metallic or Composite Structural Analysis of primary and secondary aircraft structures.
• Experience in Structural Analysis Methods and documentation, including hand-sheet analysis, as well as the development and manipulation of large FE Models using NASTRAN, FEMAP or other FEM tools.
 
Job Number: MB-1712
Job Location: El Segundo, CA
Rate: 54/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer 5-Oklahoma City

Description:
Structural Analysis Engineer 5

Location: Oklahoma City, OK
Duration: 8 Months

Description:
Plans and organizes structural analysis work at the program level to assure total compliance with structural integrity and stability requirements. Develops, integrates and documents complex or unique structural requirements to establish the system design. Coordinates with other engineering groups to establish the product''s environment. Guides product design and verifies structural integrity by defining requirements for development of analytical methods, finite element models/simulations and other analysis tools to develop the structural environment, characteristics and performance of the product. Works with customers and regulatory agencies to define certification processes that will ensure requirements are met. Reviews and approves certification results. Develops test plans and configurations, supports test execution and analyzes/reports test results to validate and verify systems and components meet requirements and specifications. Defines and organizes test programs to substantiate for customers and regulatory agencies that requirements are satisfied. Develops analytical processes/tools to improve effectiveness, quality and efficiency of the development effort. Investigates emerging technologies to develop future product designs to meet projected requirements. Works under consultative direction.

This position requires broad traditional structural analysis skills ranging from very good hand calculation skills to finite element modeling skills and also requires significant experience in fatigue analysis, durability and damage tolerance of mainly aircraft primary and secondary metal structure. Both military and commercial client aircraft experience is a definite plus as well as familiarity with applicable MIL and client aircraft design/analysis specifications.

Education / Experience:
Bachelor's degree with 14 or more years' experience, Master's degreee with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study in engineering, computer science, mathematics, physics or chemistry.

Skill Code: 63Y-Structural Analysis
 
Job Number: 19-03723
Job Location: Oklahoma City, OK
Per Diem: split
Overtime: possible
Duration: 8 months
Start Date: 3/29/19
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 859 STEPHENSON HWY
City, State: TROY, MI 48083
Phone: 843/955-9221
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis-Stress/DADT/Dynamics/FEA/FEM - Clearance CA

Description:
162964
1151-1 Engineering - Structural Analysis-Stress/DADT/Dynamics/FEA/FEM
Work Location: Palmdale, CA
Status: Open

Qty: 7
Desired Start Date: 12/18/2018
End Date: 12/7/2019

Job Description:
This position requires an Aircraft Stress Analyst to use their technical expertise to perform analysis of aircraft primary and secondary structure. The candidate will have a complete understanding of technical principles, theories and concepts in the field of aircraft structural analysis. The candidate will be expected to work independently with only general oversight and will be required to provide guidance to junior engineers. The candidate will be responsible for documenting work clearly and concisely.

The candidate will also be expected to use their technical expertise to develop structural analysis methods and perform structural analysis of advanced composite structures. Candidate must have working knowledge/experience with FEM software (Nastran or Abaqus), Computer Aided Design software (CATIA V5), and other pre/post processor software (Slim, Vision, etc.).

Work Location: Palmdale, CA
Level: Level 4: BS+16 YRS or MS+14 YRS
Pay Rate: $71.98 Hourly

Skills:
Software Skills Abaqus No 9 6 + Years
Software Skills Finite Element Analysis (FEA) No 9 6 + Years
Software Skills Nastran No 9 6 + Years
Technical Skills Stress Analysis Yes 9 6 + Years
 
Job Number: JE-1151-1S5
Job Location: Palmdale, CA
Rate: 71.98/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer

Description:
Location: Savannah, GA
Pay Rate: $64.00/HR
Duration: 6 Month Contract

****Must be a U.S. Citizen or Permanent Resident****

Job Description:
-The Structural Design group is responsible for providing an optimum design solution satisfying requirements for maximum inherent safety, performance in terms of weight and durability, and minimum cost of production and ownership.
-The group is involved with the current Company fleet and new product development.
-This job is for placement in the Core team working on the Special Missions aircraft.

Qualifications:
- Thorough understanding of structures design criteria including design loads and durability (fatigue and corrosion)
- Solid understanding of design and manufacturing processes involved for both metallic and composite parts with a focus on design for manufacturing and assembly (DFMA)
- Solid understanding of 3D Model Based Definition (3D MBD), and the application of Geometric Dimensioning and Tolerancing (GD&T) for details and assemblies
- Minimum 10,000 hours or 5 years experience on CATIA v5 in primary Structural Design Preferred
- Proficiency in CATIA v5 workbenches: part design (machined parts), sheet metal, Fibersim, Composite Part Design (CPD), FT&A, Knowledge Based Engineering (KBE) tools including use of parameters, design tables, and Visual Basic macros
- Proficiency in CATIA v4
- Proficiency in SmarTeam PLM database
- Experience with green aircraft structural modification
- Prior work experience with Company aircraft design
- Experience with knowledge management processes

Competencies:
- Strong interpersonal skills and ability to work in a team environment and across disciplines
- Ability to communicate technical findings and recommendations clearly
- Humility, be a team player, help teammates
- Passion for Structural Design work

Responsibilities include:
- Develop structural definition of the aircraft by producing the form, fit, and function documentation from conceptual layouts to final detail design
- Engage various engineering, manufacturing, and product support teams to complete designs
- Participate in design reviews
- Interact with suppliers and prepare technical coordination memos
- Prepare engineering reports
- Document, track, and manage design projects of various magnitude using online knowledge bases and tracking tools
- Provide technical leadership and mentoring to junior engineers
 
Job Number: 10355
Job Location: Savannah, GA
Rate: $64.00/HR
Per Diem: Split Possible
Duration: 6 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer

Description:
Position Purpose:
The Structural Design group is responsible for providing an optimum design solution satisfying requirements for maximum inherent safety, performance in terms of weight and durability, and minimum cost of production and ownership. The group is involved with the current company fleet and new product development. This job is for placement in the Core team working on the Special Missions aircraft. Open to US citizens or permanent residents.

Unique Skills:
• Thorough understanding of structures design criteria including design loads and durability (fatigue and corrosion)
• Solid understanding of design and manufacturing processes involved for both metallic and composite parts with a focus on design for manufacturing and assembly (DFMA)
• Solid understanding of 3D Model Based Definition (3D MBD), and the application of Geometric Dimensioning and Tolerancing (GD&T) for details and assemblies
• Minimum 10,000 hours or 5 years of experience on CATIA v5 in primary Structural Design
• Proficiency in CATIA v5 workbenches: part design (machined parts), sheet metal, Fibersim, Composite Part Design (CPD), FT&A, Knowledge Based Engineering (KBE) tools including use of parameters, design tables, and Visual Basic macros
• Proficiency in CATIA v4 and in SmarTeam PLM database
• Experience with green aircraft structural modification
• Prior work experience with company aircraft design
• Experience with knowledge management processes

Responsibilities include:
• Develop structural definition of the aircraft by producing the form, fit, and function documentation from conceptual layouts to final detail design
• Engage various engineering, manufacturing and product support teams to complete designs
• Participate in design reviews
• Interact with suppliers and prepare technical coordination memos
• Prepare engineering reports
• Document, track and manage design projects of various magnitude using online knowledge bases and tracking tools
• Provide technical leadership and mentoring to junior engineers

Experience/Education:
• Minimum of a Bachelors Degree in engineering (AE, CE, ME)
• Minimum of 5 years of experience on primary airframe structure
 
Job Number: 24-349
Job Location: Savannah, GA
Rate: $64
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer- Wing or Fuselage Experience

Description:
Currently seeking Structural Design Engineers (Wing or Fuselage) for a 10+ month contract. The ideal candidate will possess 5+ years of primary and secondary structural design experience with a focus in either wing, or fuselage design.

Responsibilities of the Structural Design Engineer (Wing or Fuselage) - Executive Aircraft
• Serve in a design role and be responsible for conceptual design, developing drawings and supporting documents i.e. parts list checklist, EOs
• Support design reviews and PDRs/CDRs
• Generate engineering models, drawings, parts list and EO utilizing CATIA V5
• Implement industry best engineering practices (design for manufacturing, design for reliability and design for maintainability)
• Will help to achieve company objectives including cost, weight, project sustaining, on production, or new product development
• Manage task execution to ensure on-time and on-target completion
• Perform tolerance and deviation studies
• Define detail parts dimensional requirements to meet final design intent
• Communicate with others in a respectful manner and acknowledge their concerns and suggestions
• Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.)

Requirements of the Structural Design Engineer (Wing or Fuselage) - Executive Aircraft
• Must have background with conceptual design
• Bachelor degree in Mechanical Engineering or related engineering discipline preferred but experience can be used in lieu of education
• Minimum of 5 years of primary and secondary structural design experience with a focus in either wing, or fuselage design
• Must possess a minimum of 2000 hours of experience with Catia V5 4
• Knowledge of Fibersim
• Knowledge of ASME Y14.5 dimensioning and tolerancing
• Experience with Catia V5 4. Working knowledge of full life cycle drawing approval process including communication with manufacturing, stress, CM, and quality
• Working knowledge of composite aircraft construction including primary and secondary structure
• Familiarity with structural analysis methods, load paths, and material properties
• Proficient in Microsoft Office Products

The Structures Company is an AA/EOE.
 
Job Number: 274
Job Location: NC
Rate: $60/Hr.
Per Diem: Yes
Overtime: Yes
Duration: 10+ Months
Start Date: March 2019
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Stress Analysis Engineer III & IV - (WA)

Description:
Over 25 Positions in the Seattle/Everett, WA area.

Experience with aircraft structures, analytical skills, design/produce process, engineering analysis and/or design/test/certification regulations is essential. Work location will be in Puget Sound and will vary based on placement.

Leads development, integration and documentation of structural requirements to establish the system design. Coordinates with other engineering groups to establish the product''s environment. Guides product design and verifies structural integrity by using and developing analytical methods, finite element models/simulations and other analysis tools throughout the product lifecycle to develop the structural environment, characteristics and performance. Leads development of test plans and configurations, supports test execution and analyzes/reports test results to validate and verify systems and components meet requirements and specifications. Defines and documents certification and test results to substantiate for customers and regulatory agencies that requirements are satisfied. Supports in-service products by leading investigations into failures and analyzing improvements. Develops analytical processes/tools to improve effectiveness, quality and efficiency of the development effort.

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
 
Job Number: StressWA
Job Location: Everett, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structures Design Engineer

Description:
Thorough understanding of structures design criteria including design loads and durability (fatigue and corrosion) - Solid understanding of design and manufacturing processes involved for both metallic and composite parts with a focus on design for manufacturing and assembly (DFMA) - Solid understanding of 3D Model Based Definition (3D MBD), and the application of Geometric Dimensioning and Tolerancing (GD&T) for details and assemblies Minimum 10,000 hours or 5 years’ experience on CATIA v5 in primary Structural Design Preferred candidates will also have: - Proficiency in CATIA v5 workbenches: part design (machined parts), sheet metal, Fibersim, Composite Part Design (CPD), FT&A, Generative Drafting (2D Drawings), Knowledge Based Engineering (KBE) tools including use of parameters, design tables, and Visual Basic macros - Proficiency in CATIA v4 - Proficiency in SmarTeam PLM database - Experience with green aircraft structural modification - Prior work experience with Gulfstream aircraft design - Experience with knowledge management processes Competencies essential for the job: - Strong interpersonal skills and ability to work in a team environment and across disciplines - Ability to communicate technical findings and recommendations clearly - Humility, be a team player, help teammates - Passion for Structural Design work Responsibilities include: - Develop structural definition of the aircraft by producing the form, fit, and function documentation from conceptual layouts to final detail design - Engage various engineering, manufacturing, and product support teams to complete designs - Participate in design reviews - Interact with suppliers and prepare technical coordination memos - Prepare engineering reports - Document, track, and manage design projects of various magnitude using online knowledge bases and tracking tools - Provide technical leadership and mentoring to junior engineers. MUST BE US PERSONS TO QUALIFY TO FOR THE POSITION.
 
Job Number: 19-141915
Job Location: Southeast
Rate: $64.00/hr
Per Diem: Split
Overtime: Possible
Duration: 6 months +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer

Description:
Seeking an Aircraft Structural Design Lead who will be responsible for leading all structural design activities. This position will be located in Reno, NV and report directly to the Structures Manager.

Qualifications:
• Build and Lead all parts of Aircraft Structural Design organization
• Strong knowledge and understanding of latest structural design as well as manufacturing trends in the Aerospace industry
• Previous experience with Conceptual design is a must.
• Analyzes the applicability of new and emerging technologies and advanced techniques.
• Serve as the primary design focal between company program, Tier 1 supplier and regulatory authorities
• Thorough understanding of the structural design requirements for Part 25 certification
• Provide technical leadership in design and development of the preliminary structures layout that meets weight, cost, manufacturability and certification requirements
• Develop schedule, cost and supplier management milestones
• Support new business development, trade studies and proposal activities.
• Support the structures team in development of the PSP, PSCP, issue papers, and other certification documents.
• Support technical review of supplier capabilities to facilitate source selection.

Client places a premium on problem-solving abilities and innovative thinking.

Requirements:
• Must be either a US citizen, a US permanent resident (a “US Person”) or a Canadian citizen.
• Minimum Bachelor’s Degree in Engineering. Master’s Degree strongly preferred
• 12+ years of experience in performing design of large aerospace structures.
• 3+ years of leadership experience on the aircraft development program
• Knowledge of the conceptual and preliminary design phases of aircraft development is strongly preferred
• Must have demonstrated leadership capabilities
• Experienced in dealing with and influencing internal and external stakeholders
• Highly self-motivated with a strong bias for action, and excellent problem-solving skills across multi-disciplinary skill sets
 
Job Number: 42-011
Job Location: Reno, NV
Rate: DOE but competitve
Per Diem: YES
Overtime: YES
Duration: 1 year+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structures Lead

Description:
Currently looking for an experienced Senior Level Structural Engineer to to fill an opening with a company located in Moses Lake, WA. Interested candidates should have at least 10 years exposure to flight test and another 5-10 years of aviation based experience in an engineering environment.


Responsibilities of the Structural Engineer Lead


Discuss, review and participated in airplane structural and system modification plans and preparation activities.
Resolve technical issues relating to structural and system installation.
Support Maintenance Engineering teams during modification periods.
Generate structural and system installation change modification drawings.
Ensure on-time Engineering deliverables to support flight test schedule.
Lead and oversee the technical and design aspects for structures/systems installation.
Troubleshoot and problem solve any issues that arise.









Requirements
10+ years of test flight or certification experience.
5-10 years of aerospace engineering experience.
Good understanding of aircraft systems and operations.
Future-oriented in thinking and operation.
Ability to successfully contribute to a positive and productive work environment.
Able to instil a sense of urgency in team members.
Able to be patient and objective in difficult situations with different types of people.
Strong analytical skills, with an ability to troubleshoot, problem-solve and effectively and efficiently make decisions.
Strong communication skills (oral, written, presentation).
Good project management skills, including the ability to take ownership for accomplishing assigned tasks.
Results-oriented planner and delegator who ensures that goals are met. Able to set priorities and keep to projected schedules.
 
Job Location: Moses Lake, WA
Per Diem: Possible
Overtime: Yes
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structures MRB Engineer

Description:
Structures MRB Engineer has minimum 10 years dedicated Structures MRB Engineering experience at a recognized Aerospace Manufacturer. - Experience should include creation and justification of engineering dispositions for nonconformances of composite and metallic, pressurized and non-pressurized aircraft structures. - Experience should be in a Production and/or schedule-driven environment. - Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment. - Strong written/verbal communication and interpersonal skills. - Must be computer literate (such as, but not limited to: Catia V5, Solumina, SmarTeam, Word, Excel) - Typically a 40-hr. work week, with some week/weekend OT.
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Company products and services


Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs. in specific technical discipline or 15 yrs. broad Eng. experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
System Safety Engineer - Mid-Level

Description:
General Summary:
This position is for a mid-level engineer reporting directly to the Section Chief of System Design Assurance. The engineer will be responsible for compiling system safety assessments on various airplane systems.


Duties and Responsibilities:
Primary tasks include performing Functional Hazard Assessment (FHA), System Safety Assessment (SSA) and Particular Risk Assessment (PRA) to support all stages of aircraft development. Secondary tasks include review and support of supplier FMEAs, compilation of safety documents, supplier coordination, and inter-departmental coordination.


Knowledge, Skills and Abilities:
• Working aircraft and system safety assessments in accordance with SAE ARP 4761
• Capable of handling complex individual work assignments
• Possess excellent coordination skills, and must work well in a multi-functional team environment
• Familiarity with requirements of 14CFRPart 23 and EASA CS23 is required. Experience with both mechanical and electrical/avionics systems is preferred


A strong background and demonstrated ability is required in the following areas:
o Conduct of SAE ARP4761 programs
o Performance of Reliability Predictions, FMEAs, FTAs, CCAs, and maintenance task identification for continued airworthiness
o Compilation of System Safety Analyses
o Supplier interface, coordination, and task management
o Must be familiar with Microsoft Office suite (Word, Excel, Project, PowerPoint). Must be conversant with RM&S analyses tools e.g. PTC Windchill, Isograph Reliability Workbench, CAFTA
o Familiarity with requirements management tools (DOORS), PLM tools (TeamCenter etc.) and SAP is desired

The Structures Company is an AA/EOE.
 
Job Number: 269
Job Location: NC
Per Diem: $65/Hr
Duration: 10+ Month
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer(Modeling & Simulation)

Description:
•Provide support as 3D Modeling and Simulation Expert/Trainer in support of virtual aircraft maintenance simulations.
•Applies an interdisciplinary, collaborative approach to plan, design, develop and verify complex lifecycle balanced system of systems and system solutions.
• Evaluates customer/operational needs to define and coordinate system performance requirements, integrate technical parameters and assure compatibility of all physical, functional and program interfaces. Performs various analyses to optimize total system of systems and/or system architecture.
• Performs analyses for affordability, safety, reliability, maintainability, testability, human systems integration, survivability, vulnerability, susceptibility, system security, regulatory, certification, product assurance and other specialties quality factors into a preferred configuration to ensure mission success.
• Develops, maintains and identifies improvements for the planning, organization, implementation and monitoring of requirements management processes, tools, risk, issues, opportunity management and technology readiness assessment processes.
• Resolves cross-functional technical issues.

Education: Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. Experience with 3D modeling and simulation, digital human modeling, VR technologies, computer graphics/visualization, scripting languages, general understanding of windows networking desired.
 
Job Number: SYSENGCA2019
Job Location: Seal Beach, CA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6 mon
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Shailendra Mishra
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Stress Analyst

Description:
Location: Savannah, GA
Rate: $75.00 - $80.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
- Experience in metallic door structures and mechanism analysis is highly desired.
- Experience in support of design and development of mechanical systems is desired
- 5 years minimum aircraft stress experience required.
- Static and fatigue analysis of primary and secondary airframe structure of metallic or composite construction experience required.
- Strong background in classical stress analysis required.
- Experience with Catia V5 to support stress analysis and drawing release required.
- Experience with FEM analysis methods a plus but not required
- Experience in workflow review and approval process is a plus.

Education and Experience Requirements:
- Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
- Five (5) yrs in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors.
- Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principle Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering related field preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 10550
Job Location: Savannah, GA
Rate: $75.00 - $80.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Stress Engineer

Description:
• Experience in metallic door structures and mechanism analysis is highly desired.
• Experience in support of design and development of mechanical systems is desired
• 5 years minimum aircraft stress experience required.
• Static and fatigue analysis of primary and secondary airframe structure of metallic or composite construction experience required.
• Strong background in classical stress analysis required.
• Experience with Catia V5 to support stress analysis and drawing release required.
• Experience with FEM analysis methods a plus but not required
• Experience in workflow review and approval process is a plus.

Responsibilities:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area
• Actively works to improve daily processes and ensures all work meets customer requirements
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product

Experience/Education:
• Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Five (5) yrs in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
 
Job Number: 24-330
Job Location: Savannah, GA
Rate: $75 - $80
Per Diem: Yes
Overtime: Yes
Duration: 1 year+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Catia V5 Instructor

Description:
Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Unique Skills:
• CATIA v5 experienced with 5000+ hours. All Level 1 tools CATIA v5 (Part Design, Assembly, Drafting).
• Level 2 tools CATIA v5 Generative Surfacing, Free Style Shaping, Generative Sheetmetal, and Generative Stress Analysis.
• Other tools: CATIA v5 Composites, Electrical EHI, Capitol Harness, Tubing experience a plus.
• Quantitative experience with Geometric Dimensioning and Tolerances a plus.
• Experience working within PDM systems such as Enovia, SmarTeam or NX/Teamcenter.
• Formal Classroom instruction experience required for CATIA and PDM.

Education and Experience Requirements:
• Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Principal Duties and Responsibilities:
• Ideal Candidate will primarily teach, assist and mentor employees with CATIA v5 and SmarTeam.
• Candidate will support Engineers and be expected to answer questions intelligently in a class setting.
• This candidate will primarily be on location in Tulsa and be expected to travel back and forth to Savannah and sub tier supplier sites to support Gulfstream Oklahoma.
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area
• Actively works to improve daily processes and ensures all work meets customer requirements
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
• Advanced degree in engineering related field preferred
• The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 24-346
Job Location: Tulsa, OK
Rate: $60/hr
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Writer Sr.

Description:
Location: Savannah, GA
Rate: $37.00/HR
Duration: Long Term Contract

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
EWIS (Electrical Wiring Interconnection System) best practices, S1000D Technical Publication Specification, STE (Simplified Technical English), and PLM (Product Lifecycle Management) database experience desired.

Education and Experience Requirements:
Bachelor's Degree or equivalent experience in the authoring of technical publications required. Four (4) years of technical publications experience, to include using industry standards to develop/revise technical documents in word processing applications. Knowledge of basic aircraft system methodology or equivalent technology is required. Proficiency in computer technology/software and typing skills is required. An A&P license and 4 years of related aircraft experience in addition to the four (4) years technical publications experience may offset the degree.

Position Purpose:
Directly responsible (either individually or with other team members) for the development of technical publications. This can include special projects, research and development, and aircraft safety-related content. Support the complete workflow process to ensure successful development and revision of technical publications. Comply with established quality processes to ensure accuracy, ease of use, and timely delivery of content.

Principle Duties and Responsibilities:
Essential Functions:
1. With minimal to no supervision, use aircraft technical data to develop technical content that provides the information necessary for efficient return to service of the aircraft.
2. Conduct reviews, analysis, and modification of technical documents to gain a thorough understanding of complex aircraft system operation.
3. Provide training support on complex system operation and technical publications software and processes.
4. Participate with publications team to ensure department workflows and business processes are followed.
5. Proactively conduct discussions with internal/external customers in the development of source data, making sure it meets technical publication requirements.
6. Directly collaborate with Research and Development, Production, Completions Center, and Customer Support personnel to develop, review, and approve technical procedures.
7. Provide process improvement recommendations to leadership that can reduce overall department cost and/or increase productivity.
8. Contribute to development and continuous improvement of department styles, standards, operating procedures, and priorities.
9. Provide input to leadership on new processes or technology to enhance the Technical Publications business model.
10. Assist in the development of solutions to resolve technical data challenges.
11. Collaborate with leadership, team members, and other departments to develop/implement special projects.
12. Perform other duties as assigned.

Other Requirements:
1. Extensive knowledge of aircraft system methodology gained through practical experience is required.
2. Strong technical writing and communication skills are required.
3. Ability to read and interpret engineering data is required.
4. Experience with 3-D data is desired.
5. Thorough knowledge of aircraft/hand tools, test equipment, parts nomenclature, maintenance procedures, and aircraft equipment (obtained through experience, research, or training) is required.
 
Job Number: 10463
Job Location: Savannah, GA
Rate: $37.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Thermal and Anti-Ice Engineer

Description:
• Thermal and Anti-Ice Engineer will be responsible for developing the subsystems requirements, architectures, roadmaps, and overall development of the subsystem from concept through certification.
• The candidate must be a subject matter expert in the relevant subsystem and have a thorough technical understanding of development of the subsystem.
• The candidate will be knowledgeable of FAR 25 certification requirements for the subsystem and subsystem components.
• Thermal and Anti-Ice Engineer will be responsible for the design of the relevant subsystems of the AS2 supersonic business jet to meet market and certification requirements.
• The successful candidate will have a commanding and fundamental understanding of how to design, analyze, and certify the relevant subsystem and have expert level knowledge of system integration into the aircraft.
• The candidate should be regarded as the technical subject matter expert for the relevant subsystem.

Basic Qualifications:
• BS degree or higher in mechanical/aerospace engineering.
• Minimum of seven years senior level technical experience in Thermal and Anti-Ice design and certification required.
• Experience with design and certification of FAR 23 or FAR 25 subsystems required.
• Strong technical, interpersonal, communication, administrative, and presentation skills. Demonstrated leadership in solving technical challenges.
• Significant experience on aircraft design teams, from concept through certification, in a collaborative multi-discipline team environment.
 
Job Number: 42-006
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Weight Engineer

Description:
We are seeking an experience Weight Engineer to fill an opening for a company in Seattle, WA. Interested candidates should have aircraft certification experience in relation to weight and center of gravity in addition to flight test experience.

The responsibilities of the Weight Engineer:
Management of the aircraft weight & C.G.
Aircraft weight reduction activity and design weight growth study.
Certification activity related to weight and C.G.
Support of the sales, marketing, customer support, flight test, ground test and manufacturing tooling/process related to weight and C.G.
Check the status and forecast of aircraft weight and C.G.
Gathering the weight data / information of system and structure components from design team of MITAC and suppliers
Check the status weight of system and structure component vs target weight
Design weight growth plan
Determine or revise the design weight and C.G. envelope
Preparation of weight report and mass data for analysis, tests and manufacturing tooling / process
Preparation of weight and balance manual
Measurement of the aircraft, major assemblies, components
Improvements of weight data gathering and verification process
Prepare presentation materials and/or attend the meeting or discussion with aviation authorities.


Requirements
Aircraft certification experience in relation to weight and center of gravity.
Extensive flight test experience.
Four (4) year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation).​

 
Job Location: Seattle, WA
Per Diem: Possible
Overtime: Yes
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wire Design & Install Engineer

Description:
The candidate will mentor and coach lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for Military Aircraft, Military Derivative Aircraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, B-1B, B-2, B-52 and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft harness/cable design on the various platforms.

Other job responsibilities may include
• Develops and maintains cable/wire harness detail and assembly designs
• Analyzes results and performs design reviews
• Develops and maintains electrical product detail, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry, antennas)
• Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests)
• Documents processes, specifications and procedures that support the design and manufacture of electrical commodities
• Develops basic statements of work
• Participates in technical review of supplier capabilities to facilitate source selection
• Analyzes functional and physical input to assure development of complete integrated design
• Works under general mentorship

Must possess good organizational, interpersonal, and problem solving skills. Must have demonstrated a strong work ethic and sense of urgency for completing assigned work with a history of meeting commitments. Ability to adjust priorities to multiple demands and unanticipated events.

Boeing is the world's largest aerospace company and leading manufacturer of commercial airplanes and defense, space and security systems. We are engineers and technicians. Skilled scientists and thinkers. Bold innovators and dreamers. Join us, and you can build something better for yourself, for our customers and for the world.
review of supplier capabilities to facilitate source selection. Analyzes functional and physical input to assure development of complete integrated design. Works under general direction.
 
Job Number: 35459
Job Location: Oklahoma City, OK
Per Diem: yes
Overtime: possible
Duration: 6 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Angie Leahey
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wire Design & Install Engr 5

Description:
Wire Design & Install Engr 5

Location: Oklahoma City, OK
Duration: 6 months

Job Description:
OKC Electrical Harness/Cable Group is seeking senior electrical harness/cable engineers. The candidate will mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for client Military Aircraft, Military Derivative Aircraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, B-1B, B-2, B-52 and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft harness/cable design on the various platforms.

Other job responsibilities may include
- Provides guidance in the development of cable/wire harness detail and assembly designs.
- Provides guidance in the development of electrical product detail, assembly and installation designs.
- Provides direction used by multiple teams to analyze complex results and performs design reviews.
- Provides guidance in engineering design disposition on discrepancies. Defines processes, specifications and procedures that support the design and manufacture of electrical commodities.
- Provides direction used by multiple teams to develop complex statements of work, metrics, schedules and budgets.
- Directs the technical review of supplier capabilities to facilitate source selection.
- Directs the development of functional and physical design requirements to ensure complete integrated design architecture.
- Works under consultative mentorship

Must possess good organizational, interpersonal, and problem solving skills. Must have demonstrated a strong work ethic and sense of urgency for completing assigned work with a history of meeting commitments. Ability to adjust priorities to multiple demands and unanticipated events.

Client is the world's largest aerospace company and leading manufacturer of commercial airplanes and defense, space and security systems. We are engineers and technicians. Skilled scientists and thinkers. Bold innovators and dreamers. Join us, and you can build something better for yourself, for our customers and for the world.

Skill Code:
652-Wiring Design
 
Job Number: 19-03721
Job Location: Oklahoma City, OK
Per Diem: split
Overtime: possible
Duration: 6 months
Start Date: 3/29/19
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 859 STEPHENSON HWY
City, State: TROY, MI 48083
Phone: 843/955-9221
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wire Harness Designer

Description:
Description
Produce wire harness assembly (formboard) drawings
Produce wire harness manufacturing instructions
Produce wire harness termination drawings
Produce wire harness installation instructions

Qualifications:
Strong understanding of wire harness manufacturing process and formboard drawings
Strong understanding of electrical schematics & termination drawings
Experience working with electrical designers during schematic creation
Experience integrating wire harnesses in vehicle
Extensive knowledge of aircraft-type wiring and components such as connectors, backshells, conduits, relays, switches, terminal junction system components, etc.
Catia V5 Electrical Workbench is a plus
Experience with Mentor Graphics is a plus
Experience with composites is a plus
Must have a B.S. Engineering degree from an accredited university

The Structures Company is an AA/EOE.
 
Job Number: 267
Job Location: CA
Rate: Up to $65/Hr. **DOE**
Per Diem: Yes
Overtime: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Back to Advanced Job Search