Job Search Results

292 listings were found that matched your search words: Keywords: Mechanical ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2020/08/12 Wednesday 01:42PM Pacific Time by ContractJobHunter. )

Listings 1 - 292

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler

Description:
Assembler

Job ID # 2020-11461

Contract Opportunity

Location: Marion, MA

Industry: Aerospace & Defense

Minimum Education: High School Diploma

 

What You’ll Do:

Perform a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables. Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws.
Makes continuity checks on work in process and completed.
May conduct quality inspections on processing line in accordance with quality specifications.
May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions
What You’ll Need:

J-STD-001 or some soldering desired.
 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.



Education & Experience:

High School Diploma
 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/
 
Job Number: Job ID # 2020-11461
Job Location: Marion, MA
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 12 Months
Input Date: 06/25/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler

Description:
Assembler

Job ID # 2020-11432

Contract Opportunity

Location: Sylmar, CA

Industry: Aerospace & Defense

Minimum Education: High School Diploma/GED

 

What You’ll Do:

Perform simple production assembly operations on structural and mechanical assemblies, subassemblies and aircraft systems, equipment and accessories using manual operations.
 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.



Education & Experience:

High School Diploma/GED
 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.
 
Job Number: Job ID # 2020-11432
Job Location: Sylmar, CA
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 12 Months
Input Date: 06/18/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler

Description:
Assembler

Job ID # 2020-11429

Contract Opportunity

Location: Manassas, VA

Industry: Aerospace & Defense

Clearance Requirement: Ability to Obtain Security Clearance  

 

What You’ll Do:

Perform a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables.
Work from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws.
Makes continuity checks on work in process and completed.
May conduct quality inspections on processing line in accordance with quality specifications.
May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions.
What You’ll Need:

Must be able to obtain Security Clearance
Technical Skills:
Blueprint Reading
Soldering
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

 
 
Job Number: Job ID # 2020-11429
Job Location: Manassas, VA
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 12 Months
Input Date: 06/18/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Assembler

Description:
Assemblers will be required to do assembly work in a manufacturing plant. The use of hand tools, tape measure and converting decimals to fractions are part of the daily tasks. In addition, working with your hands to be able to cut and form metals and assemble products. The use of ladders, lifts and overhead cranes may also be required.

ROLE AND RESPONSIBILITIES:

  • Demonstrate team work by working well with others, offering assistance, responding positively to constructive feedback
  • Completing daily tasks on time
  • Follow safe manufacturing and material handling practices
  • Other job duties as assigned per the needs of the Shop and the Company

QUALIFICATIONS AND EDUCATION REQUIREMENTS:
  • High school diploma or equivalent (GED) required
  • Must pass required background check, drug screen and physical tests
  • Must have a mechanical aptitude and be familiar with various hand/power tools
  • 1st and 2nd shift.  1st shift hours are Mon-Fri 6:00-2:30pm, 2nd shift hours are Tues, Wed, Thurs, 12 hours days, Fri 4 hours


PREFERRED SKILLS

  • Ideal candidate will have some experience with fabrication or machining
  •  Good references with excellent work attendance and attitude

 
Job Number: 2010113359
Job Location: De Pere, WI
Duration: 6 months
Input Date: 03/20/2020
Last Updated: 08/12/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Tyler Belisle
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002frFbQAI&URLSource=cjhunter

Assembler

Description:
PDS Tech Inc is seeking an Assembler in Parsipanny, NJ

Cleaning room, sandblasting and other tasks as needed.
Mechanical- aviation background a plus but not required. Sandblasting experience preferred.
Attention to detail, must be able to work in a team environment
 
Job Number: 2010111813
Job Location: Parsippany, NJ
Duration: 10 months
Input Date: 02/11/2020
Last Updated: 08/12/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Richard Escobar
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: cecjdallasav@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fkJRQAY&URLSource=cjhunter

Assembler B

Description:
Chipton-Ross is seeking an Assembler B for an opportunity in El Segundo, CA

RESPONSIBILITIES:
Performs routine production assembly operations on structural and mechanical assemblies, subassemblies and aircraft systems, equipment and accessories using manual operations.

SUMMARY: Assembles, inspects, modifies and reworks developmental electronic subsystems, subunits, assemblies, components and harnesses and cables, used for experimental and preproduction purposes. Under engineering direction sets up and operates all types of equipment to fabricate and assemble complete flight, developmental and prototype microelectronic circuit assemblies. May set up and operate small bench microweld machines in laboratory areas.
Typical Duties and Responsibilities:
Works from blueprints, schematics, samples lacking complete details or specific information, assembly drawings, sketches, oral and written instructions requiring the identification of all circuit symbols, wiring codes and electrical components.
Determines work sequence, positions, assembles and modifies developmental electronic devices such as radar synchronizers, computers and roll servo units in accordance with schematics, wiring diagrams or other specifications, using pre-drilled chassis and printed wiring boards. Routes and connects wires and cables in the proper manner so that parts, wires or cables are reasonably accessible for removal and replacement and are mechanically connected, soldered or welded according to prescribed standards. Fabricates and routes wire harnesses and cables on panels, modules and chassis. Uses appropriate technology to assure components assembled will not shift position. Fabricates thin or thick film substrates using all appropriate processes. Fabricates and assemble microminiature circuit parts using special resins, thermo compression die bonding, ultrasonic and parallel gap microwelding and microsoldering techniques.
Identifies and selects, as called out on schematic wiring diagrams, various electrical components of proper value or size by color code, coded label or other related identification characteristics. Identifies terminal connections for components as required.
Installs parts and components for proper rotation and polarity. Checks for proper continuity, workmanship and make capacitance and resistance measurements.
Assists in the development of revised or new methods, techniques and procedures. Makes oral and written reports as required.
Works efficiently and completes all task with little or no supervision, performs soldering on all type of standard and fine pitch components. Perform soldering on complex wire connectors with little or no supervision, Applies bonding staking and coating. Assists engineering in improving methods, processes and procedures.

Ascertains that all welds are satisfactory or removes components and rewelds.
Cleans equipment as required.
Meets necessary certifications as required.
Performs rework of the same nature and level of difficulty as described.
Performs incidental related duties as assigned or required.

EDUCATION:
Accredited Education/experience typically acquired through basic education (e.g. High School diploma/GED) and typically 1 or more years' related work experience or an equivalent combination of education and experience (e.g. vocational school/Associate).

WORK HOURS: 5:30AM-2:30PM
Full-Time/First Shift

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 186025
Job Location: El Segundo, CA
Rate: $DOE
Duration: 5 Months
Input Date: 06/04/2020
Last Updated: 08/12/2020
Firm Name: CHIPTON ROSS
Attention: Christophor Long
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: clong@chiptonross.com
Website: www.chiptonross.com

Assembler B

Description:
Chipton-Ross is seeking an Assembler B for an opportunity in El Segundo, CA.

RESPONSIBILITIES:
Performs routine production assembly operations on structural and mechanical assemblies, subassemblies and aircraft systems, equipment and accessories using manual operations.

SUMMARY: Assembles, inspects, modifies and reworks developmental electronic subsystems, subunits, assemblies, components and harnesses and cables, used for experimental and preproduction purposes. Under engineering direction sets up and operates all types of equipment to fabricate and assemble complete flight, developmental and prototype microelectronic circuit assemblies. May set up and operate small bench microweld machines in laboratory areas.
Typical Duties and Responsibilities:
Works from blueprints, schematics, samples lacking complete details or specific information, assembly drawings, sketches, oral and written instructions requiring the identification of all circuit symbols, wiring codes and electrical components.
Determines work sequence, positions, assembles and modifies developmental electronic devices such as radar synchronizers, computers and roll servo units in accordance with schematics, wiring diagrams or other specifications, using pre-drilled chassis and printed wiring boards. Routes and connects wires and cables in the proper manner so that parts, wires or cables are reasonably accessible for removal and replacement and are mechanically connected, soldered or welded according to prescribed standards. Fabricates and routes wire harnesses and cables on panels, modules and chassis. Uses appropriate technology to assure components assembled will not shift position. Fabricates thin or thick film substrates using all appropriate processes. Fabricates and assemble microminiature circuit parts using special resins, thermo compression die bonding, ultrasonic and parallel gap microwelding and microsoldering techniques.
Identifies and selects, as called out on schematic wiring diagrams, various electrical components of proper value or size by color code, coded label or other related identification characteristics. Identifies terminal connections for components as required.
Installs parts and components for proper rotation and polarity. Checks for proper continuity, workmanship and make capacitance and resistance measurements.
Assists in the development of revised or new methods, techniques and procedures. Makes oral and written reports as required.
Works efficiently and completes all task with little or no supervision, performs soldering on all type of standard and fine pitch components. Perform soldering on complex wire connectors with little or no supervision, Applies bonding staking and coating. Assists engineering in improving methods, processes and procedures.

Ascertains that all welds are satisfactory or removes components and rewelds.
Cleans equipment as required.
Meets necessary certifications as required.
Performs rework of the same nature and level of difficulty as described.
Performs incidental related duties as assigned or required.

EDUCATION:
Accredited education/experience typically acquired through basic education (e.g. High School diploma/GED) and typically 1 or more years' related work experience or an equivalent combination of education and experience (e.g. vocational school/Associate).

WORK HOURS: 5:30AM-2:30PM
Full-Time/First Shift

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 186022
Job Location: El Segundo, CA
Rate: $DOE
Duration: 5 Months
Input Date: 06/01/2020
Last Updated: 08/12/2020
Firm Name: CHIPTON ROSS
Attention: Melody Mullins
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: mmullins@chiptonross.com
Website: www.chiptonross.com

Assembler D

Description:
Chipton-Ross is seeking 65 Assembler D's located in San Antonio, TX.

RESPONSIBILITIES:
1. Perform production installations, maintenance*, preventative maintenance** and alterations*** on aircraft structure, systems and sub-systems, including electrical and avionics on standard or experimental certificated aircraft. Troubleshoot, inspect, test, repair, service aircraft and engine systems to prepare aircraft for flight. Initiate and document any nonconforming materials, hardware, software, tools, parts, assemblies, or portions thereof, according to specifications, processes, and procedures.

2. Perform audit/surveillance of all manufacturing and quality assurance processes, according to specifications, processes, and procedures. Perform functions such as: Customer/FAA Coordination, Configuration Change Verification, Conformity Inspections, Airworthiness Inspections (including Pre-flight and Post-flights), Corrective Action and Investigations. Initiate and document any nonconforming materials, hardware, software, tools, parts, assemblies, or portions thereof, according to specifications, processes, and procedures. May perform Aviation Maintenance Technician tasks in order to obtain and maintain knowledge, skills and required certifications.


DEFINITION OF TERM:
Maintenance* means inspection, overhaul, repair, preservation, and the initial installation and/or replacement of parts.
Preventive maintenance** means simple or minor preservation operations and the replacement of small standard parts not involving complex assembly operations.
Alterations*** means modifications that permanently or temporarily change an airplane from its original design configuration

Associated Duties and Responsibilities:
1. Use technical specifications, sketches, manuals, drawings, engineering instructions and FAA forms and publications to accomplish work assignment.
2. Maintains Company and FAA required records and inspection forms.
3. Maintain a safe, clean and organized work environment.
4. Plan and organize the sequence of your own work package in such a way as to promote safe, efficient operation and meet predetermined schedules in a timely manner.
5. Operate any and all types of information systems required to perform assigned tasks. Including but not limited to Company WEB based systems and Microsoft Office products.
6. Interpret and perform to the requirements of airworthiness directives, service bulletins, service letters and other approved/accepted data.
7. Apply applicable mathematical calculations to setup and use precision measuring tools, to measure gaps, heights, angles, hole diameters and depths.
8. Make production aids to facilitate work assignment.
9. Maintain necessary certifications, licenses and permits as required for assigned work.
10. As assigned, exchange information with suppliers, customers or other company representatives to explain or demonstrate operations, tests or difficulties.

PREFERRED EXPERIENCE:
737 experience preferred

EDUCATION:
Education/experience typically acquired through basic education (e.g. High School diploma/GED) and typically 7 or more years' related work experience or an equivalent combination of education and experience (e.g. vocational school/Associate+5 years' related work, Bachelor+2 years' related work, etc.).

WORK HOURS:
Full-Time/First Shift
5:30 AM - 2:30 PM
 
Job Number: 185841
Job Location: San Antonio, TX
Rate: $DOE
Duration: 7 months
Input Date: 05/18/2020
Last Updated: 08/12/2020
Firm Name: CHIPTON ROSS
Attention: Christopher Conaway
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: cconaway@chiptonross.com
Website: www.chiptonross.com

Assembly & Test Technician - Navigation Systems

Description:
PDS Tech, Inc. is seeking an Electro-Mechanical Assembly & Test Technician in Clearwater, FL.
• Performs standard testing processes on a variety of equipment and records and analyzes results. 
• This role will be assembling navigation systems. 

  • Candidates require high level of manual dexterity
  • Candidates should have minimum 2 years electro-mechanical assembly experience. 
  • Must be able to work with small intricate or delicate parts – some parts contain beryllium. Perform all other related duties as assigned. 
  • Precision soldering under a microscope experience preferred. 
  • Experience in handling of optical fiber and fusion splicing of fiber preferred but not required. 


 

 
Job Number: 1810083537
Job Location: Clearwater, FL
Duration: 8 months
Input Date: 01/16/2020
Last Updated: 08/12/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mJYCAA2&URLSource=cjhunter

Assembly Supervisor-1st Shift

Description:
1.  Position Description
Directs and trains hourly work force.  Ensures production commitments are fulfilled.  Ensures Company policies and procedures are followed.  Continuously works to improve safety, quality, and productivity in assigned area.

2.  Essential Job Functions
  1. Supervise employees on the execution of production or other tasks in accordance with a production plan.
  2. Maintain Safety awareness and support implementation of prevention initiatives.
  3. Enforce Company policies including discipline, safety, and attendance.
  4. Work with support areas to continuously improve operations in his/her area.
  5. Direct hourly work assignments.
  6. Investigate and resolve problems and issues as they arise in area.
  7. Achieve goals in productivity, quality, and schedule attainment.
  8. Develop short term plans to support production plan.
  9. Coach employees to accomplish their tasks.
  10. Train and evaluate new employees.
  11. Communicate with other areas to assure completion of goals of on time delivery and quality.
  12. Propose and support continuous improvement initiatives in all areas of the plant.
  13. Audit compliance to establish process and policies requested by management.

  Requirements:
  1. High School Diploma or equivalent, Advanced Degree in business is preferred.
  2. Proficient in the knowledge of hand tools, power tools, and electronic repair equipment.
  3. Experience working in Union environments is preferred.
  4. Experience working in heavy manufacturing of low volume high mix is highly desirable
  5. Specific knowledge and work experience in one or more of the following areas: Fabrication, Machining, Welding, Body and Paint work, Vehicle Mechanical Assembly, Vehicle Electrical Assembly.

  Skills and Abilities Required:

  1. Strong problem solving, analytical, and technical skills.
  2. Strong oral and written communication skills.
  3. Experience in the electrical, hydraulic, pneumatic, and Air conditioning systems is desired.
  4. Experience implementing or being part of a Lean Manufacturing organizations.
  5. Demonstrated success in implementation of continuous improvement initiatives.
  6. Ability to read and interpret prints and engineering documents.
  7. Familiar with Microsoft Office (Power Point, Excel, and Word).
  8. Self-motivated with ability to foster moral among his/her team.

 
Job Number: 2010113604
Job Location: Clintonville, WI
Duration: 1 months
Input Date: 04/15/2020
Last Updated: 08/12/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Karen Reno
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003On8NQAS&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionic Technician

Description:
Avionic Technician

Job ID # 2020-11452

Contract Opportunity

Location: Greenville, SC

Industry: Aerospace & Defense

 

What You’ll Do:

Work from schematics, engineering drawings and written or verbal instructions.
Install wire harnesses to include routing, terminations and continuity checks.
Utilize required tooling and equipment to perform these tasks.
Performs modifications, and replacements as directed; prepares prescribed compounds and solutions. Perform a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas.
 

What You’ll Need:

Aircraft modification instillation experience required
C-130 is a plus
 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

 
 
Job Number: Job ID # 2020-11452
Job Location: Greenville, SC
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 12 Months
Input Date: 06/24/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Cockpit Systems Engineer

Description:
The Systems Engineer, Cockpit Avionics will be responsible for some or all systems related to:
• System 23 – Communication
• System 31 – Indicating and Recording Systems
• System 42 – Integrated Modular Avionics
• System 45 – Central Maintenance Systems
• System 46 – System Integration and Display

***Systems Engineers MUST HAVE experience with a direct design role in a program that has certified a new aircraft***

Responsibilities:
• Generate, review, approve, and manage system requirements – including but not limited to regulatory, safety, human factors, design, environmental, manufacturing, quality, operational, and service requirements
• Serve as the system-level expert for integration and coordination activities with various departments and the certification authorities
• Conduct multi-disciplinary design reviews throughout the different phases of development, certification, and production readiness as required to coordinate and communicate system design projects
• Conduct trade studies, analyses, and test programs as necessary to validate system architectures meet all requirements
• Generate, review, and approve
• System safety analyses, such as FHAs, FTAs, CCAs, etc.
• Engineering drawings, schematics, and design specifications
• System and equipment test plans and reports
• Compliance documentation
• System engineering processes
• Coordinate as required to execute and manage system design projects, testing, certification, production readiness, etc.
• Work with various company departments to ensure equipment and low-level designs meet all system and aircraft-level requirements.
• Various project management tasks as required

Required:
• Skilled at creating and reviewing technical schematics, logical and functional diagrams, and engineering specifications
• Previous experience with aircraft systems
• Working knowledge of 2X.1309 analyses and processes, including Advisory Circular 23.1309-1E, SAE ARP 4761, and SAE ARP 4754A
• Working knowledge of DO-160G environmental qualification
• Excellent problem solving, communication, and technical writing skills
• Basic knowledge of FAA regulations and guidance material and industry standards
• Bachelor of Science in Engineering required; Electrical, Mechanical, or Aerospace Engineering preferred
• Proficient in English
• Proficient with Microsoft Office and Google Docs

Desired:
• Working knowledge of avionics and related equipment, technical standard orders, and minimum performance standards
• Working knowledge of DO-178C and DO-254 processes and aviation database management
• Previous experience managing complex sets of requirements
• Previous experience preparing and presenting design reviews for complex, highly integrated systems
• Previous experience defining system controls, crew indications, and flight manual procedures
• Previous experience in testing, including instrumenting, data acquisition, and documenting and analyzing results
• Whole-aircraft FAA certification program experience, Part 23 or Part 27 preferred
• Experience and involvement with industry groups to develop consensus standards
• 5+ years of relevant industry experience
• Private pilot certificate or higher
• Familiar with Dassault Systèmes engineering and management tools

POSITION MAY INCLUDE ACCESS TO TECHNOLOGY THAT IS SUBJECT TO U.S. EXPORT CONTROLS.



The Structures Company is an AA/EOE.
 
Job Number: 376
Job Location: Northern CA
Rate: OPEN - **DOE**
Per Diem: Yes
Duration: DIRECT POSITION
Start Date: ASAP
Input Date: 05/06/2020
Last Updated: 08/04/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Buyer/Procurement Analyst

Description:
Buyer/Procurement Analyst

Job ID # 2020-11450

Contract Opportunity

Location: Moorestown, NJ

Industry: Aerospace & Defense

Minimum Education: Bachelor’s Degree

 

What You’ll Do:

Obtain weekly delivery information from Suppliers and expedite as appropriate to meet internal schedule date.
Utilize LM Critical Tracking Tool to identify and improve forecasted delivery dates in support of urgent business needs.
Adjust Supplier delivery dates in P2P as warranted.
Meet department goals for on time to contract and on time to promise schedule dates.- Assist in resolving shipping and receiving discrepancies
Work with Engineering, Quality and Buyers to resolve drawing and performance specification Supplier issues
What You’ll Need:

Microsoft Office skills proficiency (WORD, EXCEL, PowerPoint, Outlook)
Strong Problem solving abilities
Ability to work in a fast paced, high volume team environment
Strong interpersonal skills
Desired Skills:
Working Knowledge of P2P Procure to Pay System
Experience with Mechanical Hardware Procurements
Government Procurement experience
Machine Shop/ Metal Fabrication knowledge
Ability to interpret engineering drawings and specifications
Soft Skills:
Interpersonal skills
Software Skills:
MS Excel
MS Officec
MS PowerPoint
 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.



Education & Experience:

Bachelor’s Degree.
 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/
 
Job Number: Job ID # 2020-11450
Job Location: Moorestown, NJ
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 12 Months
Input Date: 06/25/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CL - Advanced Manufacturing/Production Operator

Description:
CL - Advanced Manufacturing/Production Operator

Job ID # 2020-11423

Contract Opportunity

Location: Bloomington Minnesota 

Industry: Aerospace & Defense

Clearance Requirement:

Minimum Education:

Minimum Experience

 

What You’ll Do:

Perform project tasks/assignments of moderately complex nature ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables.
Perform fabrication or inspection functions in a research, production or pre-production environment by reading and interpreting moderately complex schematics and drawings.
Following more advanced methods, techniques, and sequence of operations in performing wiring, component installation, hand soldering, and cable harnessing on subassemblies and units, we’ll rely on you to build or integrate hardware for prototypes, subassemblies or systems, perform moderately complex electrical tests along with more complex rework and refurbishment of hardware and systems.
What You’ll Need:

Ability to perform more advanced loading and configuring of customer/standard software on customer device
Ability to accurately complete process paperwork and entering data into the applicable work order management system
Solid computer, communication and time management skills
Solid knowledge of measuring/test equipment and math
Creative thinking with the ability to multi-task
Commitment to ongoing professional development
Team player who thrives in collaborative environments and revels in team success
 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.



Education & Experience:

High School Diploma combined with 4 + Years of relevant work experience.

 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/
 
Job Number: Job ID # 2020-11423
Job Location: Bloomington, MN
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 12 Months
Input Date: 06/17/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CL - Advanced Manufacturing/Production Operator

Description:
CL - Advanced Manufacturing/Production Operator

Job ID # 2020-11422

Contract Opportunity

Location: Bloomington Minnesota

Industry: Aerospace & Defense

Minimum Education: High School Diploma

Minimum Experience: 4 years

 

What You’ll Do:

Perform project tasks/assignments of moderately complex nature ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables.
Perform fabrication or inspection functions in a research, production or pre-production environment by reading and interpreting moderately complex schematics and drawings.
Following more advanced methods, techniques, and sequence of operations in performing wiring, component installation, hand soldering, and cable harnessing on subassemblies and units, we’ll rely on you to build or integrate hardware for prototypes, subassemblies or systems, perform moderately complex electrical tests along with more complex rework and refurbishment of hardware and systems.
What You’ll Need:

Ability to perform more advanced loading and configuring of customer/standard software on customer device
Ability to accurately complete process paperwork and entering data into the applicable work order management system
Solid computer, communication and time management skills
Solid knowledge of measuring/test equipment and math
Creative thinking with the ability to multi-task
Commitment to ongoing professional development
Team player who thrives in collaborative environments and revels in team success
 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.



Education & Experience:

High School Diploma combined with 4 + Years of relevant work experience.
 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

 
 
Job Number: Job ID # 2020-11422
Job Location: Bloomington, MN
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 12 Months
Input Date: 06/17/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CL - Mechanical Analyst (Computational Fluid Dynamics)

Description:
CL - Mechanical Analyst (Computational Fluid Dynamics)

Job ID # 2020-11460

Contract Opportunity

Location: McLeansville North Carolina

Industry: Aerospace & Defense

Clearance Requirement: Ability to Obtain Secret Clearance

Minimum Education: Bachelor’s Degree

Minimum Experience: 5 Years

 

What You’ll Do:

Responsible for CFD (Computational Fluid Dynamic) analysis of a hydrodynamic system. 
Collaborate with other mechanical engineers to refine the designs of mission-critical components for sub-sea applications. 
Provide interim feedback to designers on the suitability of designs in fluid flow situations
Provide final evaluation for all designs against mission parameters
 

What You’ll Need:

Ability to Obtain Secret Clearance
Fully proficient with solid modeling CAD tools to create mechanical models and drawings
Fully proficient with technical standards, manufacturing/fabrication methods, and government/industry standards
Creative thinking with the ability to multi-task
Ability to quickly grasp and apply new information
Effectively handle and lead complex assignments
Ability to write technical papers
 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

 

Education & Experience:

Bachelor’s Degree in Mechanical Engineering, a related specialized area or field combined with 5 + years of relevant work experience; or Master’s Degree combined with 3 + Years of relevant work experience
 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/
 
Job Number: Job ID # 2020-11460
Job Location: McLeansville, NC
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 12 Months
Input Date: 06/25/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CL - Production Operator

Description:
CL - Production Operator

Job ID # 2020-11453

Contract Opportunity

Location: Bloomington Minnesota

Industry: Aerospace & Defense

Minimum Education: High School Diploma/GED

Minimum Experience: 2 Years

 

What You’ll Do:

Perform project tasks/assignments of a basic nature ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables
Follow methods, techniques, and sequence of operations in performing wiring, component installation, hand soldering, & cable harnessing on subassemblies and units
May be involved in packing tasks
May count and sort various product items, placing labels on packages, put manuals into binders, and form or break down boxes for the final product
May conduct manufacturing inspections on processing line in accordance to quality specifications
May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions
Contacts are primarily within immediate work unit and direct supervisor
Maintain a clean and orderly work area
Work is closely supervised, following detailed instructions, and periodic checking on work performance
What You’ll Need:

Ability to learn job skills and become familiar with company policies to complete assignments
General manufacturing process skills
Ability to use hand/torque tools, soldering irons, other light industrial tools
General communication and interpersonal skills
Ability to set up basic equipment and process hardware compliantly to specifications
General knowledge of measuring equipment and math
General computer skills
Computer literacy
Experience soldering circuit card assemblies required.
J-STD certification preferred.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.



Education & Experience:

High School Diploma or equivalent combined with 2 + Years of relevant work experience.
 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

 
 
Job Number: Job ID # 2020-11453
Job Location: Bloomington, MN
Rate: Open
Per Diem: No
Overtime: Possible
Input Date: 06/23/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Cabin Stress Technical Coordinator Engineer

Description:
Cabin Stress Technical Coordinator Engineer

Position Summary: 
The Cabin Stress Technical Coordinator Engineer will apply knowledge of engineering principles, theories, concepts, industry practices and standards to deliver high quality design engineering solutions while assuring procedural compliance within assigned engineering project teams.

Responsibilities: 
  • Plan, organize and prioritize work contents based on project deliverables.
  • Perform detailed stress analysis of aircraft cabin or cargo components, by classical hand analysis as well as Finite Element methods, to support the structural design efforts of new and modified components from the conceptual phase to development and certification.
  • Generate stress substantiation reports.
  • Develop or review structural qualification plans in accordance with the Client’s standards and regulatory requirements.
  • Review and approve vendor drawings, stress reports, and test reports when delegated.
  • Coordinate with design engineers, team lead, suppliers and technical management personnel to assure that the design meets or exceeds the project deliverables and complies with the regulatory requirements.
  • Coordinate stress activities for the Client and Suppliers 
  • Participate in regularly scheduled design reviews and is responsible to present stress findings and challenge design solutions.
  • Develop research plans and participate in industry committees at company's request. Maintains a current knowledge of developments in the field of Structural Mechanics in order to recommend innovations to improve the quality, performance, cost of the company product.
  • Compile and generate progress reports to convey deliverable objectives.
  • Provide guidance to junior level stress engineers with regards to analysis methods, process or tools.
  • Demonstrate a strong work ethic and sense of urgency for completing work assignments.


 
Experience / Skills / Training: 
  • 5 to 8 years’ experience
  • Position requires in-depth knowledge of Engineering Mechanics and Strength of Materials.
  • Good leadership and communication skills.
  • Minimum of 5 years in cabin or cargo compartment stress analysis.
  • Experience in static (FE and free-body), fatigue and transient analysis, Nastran, Patran, HyperWorks.
  • Familiar with FAA/EASA Aircraft regulatory requirements.
  • Able to utilize Microsoft Excel, Word, PowerPoint and Project PC tools


Education / Special Qualifications: 
Bachelor's or master’s degree (B.S or M.S.) in Mechanical, Aerospace
 
Job Number: 2010112380
Job Location: Mobile, AL
Duration: 6 months
Input Date: 05/07/2020
Last Updated: 08/12/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Angela Jones
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fmpIQAQ&URLSource=cjhunter

Chief Electrical Engineer - Lead

Description:
We need a talented electrical engineering lead with a demonstrated track record in designing complex electrical systems on safety critical vehicles. This lead will work closely with mechanical, software, and other cross-functional leads to oversee the electrical architecture of an all-electric VTOL aircraft, including but not limited to high-voltage powertrain systems, low-voltage electronics, and high-speed data transmission. Directing teams to optimize designs for reliability, weight, efficiency, and certification will be a focus.

Responsibilities
· Oversee the design, development and execution of the aircraft’s electrical systems.
· Own the requirements for the aircraft’s electrical architecture.
· Collaborate with various company departments to ensure equipment and low-level designs meet all system and aircraft-level requirements
· Lead, train and mentor the electrical engineering team.Required
· Experience bringing electrical hardware involving high-speed and high-voltage design from concept to production.
· Strong EE fundamentals, including familiarity with high-voltage power conversion and distribution, motor control, signal conditioning and conversion, discrete semiconductor design, and low-voltage power distribution.
· Hands-on experience with building and debugging electrical hardware.
· 10+ years of related technical lead experience.Preferred
· Experience leading a team of engineers to bring a piece of electrical hardware from concept through the design assurance and certification process (DAL, ASIL, SIL).
· Understanding of RTCA DO-160 and practical design guidelines for meeting required environmental qualification levels for airborne electrical hardware.



The Structures Company is an AA/EOE.
 
Job Number: 380
Job Location: Northern CA
Rate: OPEN - **DOE**
Duration: DIRECT POSITION
Start Date: ASAP
Input Date: 07/31/2020
Last Updated: 08/12/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: Debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

Communication Systems Engineer

Description:
This position involves designing and implementing wired and wireless communications systems on the spacecraft and interfacing with the ground systems, including ground stations and operations center. The communications engineer will:
  • Develop, document, and validate subsystem requirements
  • Coordinate with electrical, mechanical, avionics, and software teams
  • Perform link analysis and design
  • Select components to meet requirements
  • Integrate communication system components on spacecraft and ground systems
  • Plan and execute communication system testing
  • Support flight operations, analyze subsystem performance, and troubleshoot if needed
  • Assess, track, and report subsystem status to project leads


The scope of the communications engineering position includes:

  • RF communications
  • Link budgets
  • Modulation and encoding schemes
  • SpaceWire and RS-422 communication
  • Encryption technologies
  • Antennas and feed systems
  • Software-defined radio
  • CCSDS standards
  • Spacecraft ranging and tracking
  • Testing of spacecraft, payload, and ground communications


Desired skills, experience, and attributes:

  • Bachelor's degree or higher in an engineering discipline
  • 2+ years experience with RF communications
  • Knowledge of digital communication systems
  • Hands-on experience with mechanical or electrical systems
  • Experience in C/C++, Python, MATLAB, or LabVIEW
  • Excellent written and verbal communication skills
  • Ability to work independently with minimal supervision
  • Must be a “U.S. person” as defined by the ITAR (22 CFR §120.15)


 
Job Number: 2010115013
Job Location: Mojave, CA
Duration: 36 months
Input Date: 06/03/2020
Last Updated: 08/12/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003Ot7AQAS&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Components Engineer - WA State

Description:
•Work with design engineers conducting part selection and verify compliance
•Review manufacturer's data for compliance including datasheets, material declarations, change notices, qualification and screening flows, and Production Part Approval Process (PPAP) data packages
•Review and make recommendations based on Destructive Physical Analysis (DPA) test reports.
•Work with manufacturers to acquire required documentation and coordinate testing with outside test houses.
•Author non-standard part approval requests.

Qualifications:
•Bachelor's degree in electrical, or mechanical engineering, or a related field
•Experience working EEE (Electrical, Electronics, Electro Mechanical) part selection/compliance in the aerospace, automotive, or medical fields.
•Experience with one or more of the following standards: EEE-INST-0002, AEC-Q100/101/200, SMC-S-010/011.
•Experience reviewing Production Part Approval Process (PPAP) documentation.
•Strong attention to detail, desire to solve problems, and drive to resolve technical issues.
•Strong verbal and written communication skills and ability to interface with software systems, databases and Microsoft Office Suite.

Must be a U.S. citizen or permanent resident
Desired:
•5+ years working EEE part selection/compliance in the aerospace, automotive, or medical fields.
•Experience with semiconductor or other EEE component manufacturing.
•Experience with tin whisker mitigations and probabilistic analysis.
•Understanding of physics of failure.
•Experience with EEE component failure analysis.
 
Job Number: WA2598
Job Location: Renton, WA
Rate: Hourly Rate Open
Per Diem: YES
Overtime: Possible
Duration: 12 Months
Start Date: 2/3 wks from offer
Input Date: 06/16/2020
Last Updated: 07/30/2020
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composites Lab Technician - Fort Worth, TX

Description:
Composites Lab Technician JR-015463


Cyient takes pride in partnering with the world’s leading Aerospace & Defense companies to deliver value-driven and outcome-based engineering solutions. We undertake design and system-level ownership of complex components, sub-systems, and modules to allow our clients to sustain a competitive advantage.
We collaborate with clients to support and deliver a wide range of end-to-end product and process engineering solutions across the Aerospace & Defense product segments - engines, avionics, structures, systems, interiors, aftermarket, digital, and defense.

Job Description

Composites Lab Technician
Responsibilities:

• Laying up, bagging, and curing of composite and metal bonded panels; including setting up and running an autoclave.
• Machining, drilling, trimming and end tabbing of composite test specimens.
• Adhesive bonding with both paste and film adhesives, apply primers.
• Setting up and performing mechanical tests on various test coupon configurations; mechanical testing to include both static and fatigue tests, with and without strain gauges and/or extensometers, over wide range of temperatures.
• Conducting Destructive Testing & Evaluation of various production aircraft components and write summary technical report of the findings and conclusions.
• Leading mini projects (Test Requests) through all stages to completion; interfacing with the customer when needed.
Education:
• Associates Degree in Engineering, Engineering Technology, Materials Science, Manufacturing Technology, Mechanical Engineering or commensurate training and certification.
Experience:
• Possess a mechanical aptitude
• Technical knowledge of the use and application of adhesives, sealants, primers and composites.
• Ability to perform composite layup, bagging and curing, machining, bonding, including the ability to run an autoclave.
• Ability to use all equipment commonly used for composite specimen preparation (oven, grinder, drill press, cutting machine, band saws, platen press, etc.)
• Possess working knowledge of mechanical testing using automated equipment and data acquisition systems.
• Possess above average level of technical writing abilities and demonstrate ability to use advanced computer software tools.
• Be able to read and interpret material and process specifications computerized drawings and associated parts lists.

Citizenship: US Citizenship required

Skills & Experience
Autoclaves, Composites Manufacturing, Composites Testing And Evaluation - Properties
Cyient is an Equal Opportunity Employer.

Cyient recruits, employs, trains, compensates, and promotes regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender, gender identity or expression, veteran status, and other protected status as required by applicable law. We are proud to be a diverse and inclusive company where our people can focus their whole self on solving problems that matter.

https://cyient.wd3.myworkdayjobs.com/en-US/careers/job/Fort-Worth-Texas/Composites-Lab-Technician_JR-015463
 
Job Number: JR-015463
Job Location: Fort Worth, TX
Input Date: 06/29/2020
Firm Name: CYIENT
Attention: Elizabeth Stoddard
Address: 1401 NOLAN RYAN EXPY
City, State: ARLINGTON, TX 76011
Website: www.cyient.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Control Systems Engineer

Description:
Tasks include analysis and testing of aircraft handling qualities, design of control laws, and development of simulation math models. This engineer will perform analysis and evaluation of total air vehicle stability and control characteristics to ensure acceptable handling qualities in compliance with specifications; apply control theory to the design of control laws that achieve desired characteristics for dynamic control response, gust or disturbance rejection, system failure robustness, and loads considerations; develop and validate both linear and nonlinear mathematical models of air vehicle and subsystem dynamics; and will use simulation and flight testing, including planning, data analysis and interpretation of test logs, to define handling qualities.
Qualifications
• B.S. + 3 years of experience, or M.S. in mechanical engineering, electrical engineering, aerospace engineering, computer science, or a related field
• Knowledge of aircraft flying qualities, flight dynamics, piloting control strategies, and flight control systems
• Proficiency in C/C++ desired
• Proficiency with MATLAB/Simulink desired
• Digital signal processing and controls education and/or experience desired




The Structures Company is an AA/EOE.
 
Job Number: 384
Job Location: Northern CA
Rate: OPEN - **DOE**
Duration: DIRECT POSITION
Start Date: April
Input Date: 05/09/2020
Last Updated: 08/05/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Controls Dynamics Engineer

Description:
This is a senior position in the field of Helicopter Dynamics. If you are looking to use your vast experience to make an impact, then this is your position.

#Duties & Responsibilities:
* Supports, performs, and manages a Dynamics analysis function for rotorcraft mechanical systems, which applies Dynamics theory to the design and analysis to verify designs have the desired Dynamics characteristics.
* Analysis of complicated mechanical systems mainly via by mathematical modeling of systems, as well as the support of component and system level testing to verify satisfactory Dynamic characteristics.
* Specific projects will include the design, analysis and test of absorber technologies and seat isolation technologies to be flight tested on developmental rotorcraft, and support of flight testing of aerial refueling probes to verify adequate dynamic response characteristics.

#Qualificatiopns:
* SHould have 30 years of experience in the field of hliecopter dynamics.
* Knowledge and experience of finite element modeling tools such as NASTRAN/PATRAN isrequired,
* Experience with performing rap testing using LMS equipment.
* BS degree in Engineering related field, prefer advanced degree
 
Job Number: 132486
Job Location: Fort Worth, TX
Input Date: 06/18/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Valerie White
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
Duties:
Our client in Orlando, FL is seeking an Aerospace or Mechanical Engineer to support the deceleration team. This team is responsible for design and analysis of the parachute systems used for air-extraction of our various launch vehicles. These air-extractions are similar in concept to standard military cargo extraction from aircraft like the C-130 or C-17A.

The successful candidate will be asked to perform parachute design activities through 6DOF simulation and loads analysis. This entails designing parachute structures, reefing ratios, riser and mainline lengths, etc. to ensure a successful extraction and descent while ensuring launch vehicle load capabilities are not exceeded. The candidate will be expected to read, understand, update, and maintain a 6 Degree-of-Freedom simulation used to simulate the extraction and descent of our clients launch vehicles. This position will require a background in vector mechanics, dynamics, and software configuration control processes. The candidate may also participate in estimating aerodynamic properties and loads through the use of computational fluid dynamics (CFD) software.

Essential Job Functions (Including % of Time for Each):
50% - Activities to include tooling design, tooling procurement and fabrication, and conduct tooling functional checkout. Responsible for tooling design based on efficiency, ease and safety or operation, ease of maintenance and cost of fabrication. Interfaces with suppliers and manufacturing personnel to assure that tool design requirements and intent are met. Coordinate tooling functional checkout with manufacturing disciplines prior to releasing tooling to manufacturing operations.
15% - Parachute Design and Loads Analysis.
40% - Parachute/Extraction System Modeling and Simulation updates.
35% - Computational Fluid Dynamics (CFD) of Parachutes and Target System.
10% - Oversee field installation and testing of Parachute design.

Skills:
REQUIRED:
1. Minimum of 2 years of professional experience working with parachute deceleration systems or an equivalent combination of experience and education.
2. B.S. in Aerospace, Mechanical, or equivalent degree.
3. Prior experience with 6DOF simulation of deceleration systems.
4. Prior experience with Computational Fluid Dynamics (CFD) software.
5. Ability to program and use MATLAB/Simulink.
6. Exceptional written and oral communication skills to include report writing, requirements derivation, and documentation, as well as design review presentations.

DESIRED:
1. Experience with programming in C, C++, and Fortran and using MATLAB/Simulink.
2. Experience working with deceleration systems.
3. Experience using CANO, CALA, TENSION, and/or LS-DYNA analysis tools.
4. Working knowledge of aircraft/missile dynamics and control.
5. Experience with air drops from military aircraft.
6. Active DoD Secret Clearance.
 
Job Number: 12119
Job Location: Orlando, FL
Rate: $38.00/HR
Per Diem: N/A
Overtime: Possible
Duration: Direct Hire
Start Date: ASAP
Input Date: 07/08/2020
Last Updated: 07/20/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
Description:
In this position the engineer will design and develop complex electronic hardware systems for aircraft. A major focus of this mission critical engineering role will involve developing aircraft electronic systems. The engineer will be responsible for Circuit design, Field Programable Gate Array (FPGA) programing, and Printed Circuit Board (PCB) and Circuit Card Assembly (CCA) designs working on a cross functional team. Working on a cross functional team the engineer will be working with mechanical and software design teams to develop a complete qualified flight tested aircraft solutions.

The engineer will have an opportunity have an impact on the following areas: Requirements analysis/derivation, concept development, hardware architecture, component selection, schematic capture, reliability analysis (derating, thermal, signal integrity, power integrity, stability, overstress), design verification, system integration, and qualification.

Basic Qualifications:
- A BS Degree in Electrical Engineering or closely related technical field or equivalent experience/combined education
- Experience with circuit design concepts
- Experience in circuit analysis, troubleshooting, test instrumentation, and data analysis tools
- Experience with Printed Circuit Board (PCB) board design and Circuit Card Assembly (CCA) design
- Experience with VHDL, Verilog, or System Verilog languages to support FPGA firmware programing
- The technical ability to effectively define and interpret system level requirements and derive the requirements necessary to interface between lab and hardware
- The ability to work well in a teaming environment with other disciplines (Systems Engineering, Software Engineering, Mechanical Engineering, etc.)

Desired Skills:
- Experienced using Xilinx and/or Microsemi FPGAs
- Experienced with design and simulation tools (Xilinx Vivado, Microsemi Libero, Mentor QuestaSim)
- Experience with Perl, Visual Basic, and C/C++,
- DO 178C/254 verification
- High Speed and RF design
- Cadence schematic capture, PCB layout Allegro

Must be comfortable with Circuit Design, FPGA Firmware Programing, and Printed Circuit Board (PCB) and Circuit Card Assembly (CCA) Designer
 
Job Number: 12463
Job Location: Fort Worth, TX
Rate: $65.57/HR
Per Diem: Split Possible
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 07/01/2020
Last Updated: 07/01/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Electrical Design Engineer

Description:
Seeking an experienced electrical engineer to take ownership of several key components. This role requires the candidate to thrive in a high paced environment and will have an integral role in advancing the next generation of electrically powered vertical lift aircraft.
Roles and Responsibilities:
Define: Generate conceptual layouts for critical systems. This includes high voltage systems to drive BLDC motors and low voltage systems to control key elements of the avionic and vehicle management systems. It is desired for the candidate to specifically take ownership of analog & digital circuits (MOSFETs, op-amps, switching regulators, gate drivers, microcontrollers, SPI, I2C, etc) for high power BLDC drive motors as other systems such as electro-mechanical actors. The candidate will participate in initial equipment conceptual development and carefully balance product specifications, process requirements, and lead-time limits. The engineer will define key requirements and take ownership of them through the design life-cycle.
Do: The Electrical Design Engineer will also take the lead designing a myriad of critical components that are the basis for the Butterfly Aircraft’s electrical propulsion systems. Areas of focus include BLDC motor drivers and the associated electrical components. The end application will require extreme levels of reliability and fault tolerance and therefore the systems and components designed by the electrical engineer will need to adhere to aerospace best-practices for flight critical vehicle management systems. Familiarity with DO254 and DO178 is desired. The ideal candidate will have a hand in developing new systems from the ideation stage and seeing them through to a flight-worthy component. Thus, the role will require experience designing, prototyping, and testing multiple iterations of the development PCBs and be competent in the skills and tools needed to undertake this effort.
Key Responsibilities:
• Start-to-finish hardware ownership: Specification, architecture, design, simulation, schematic, layout supervision, prototype, validation, and manufacturing of circuit boards. Thoroughly document design requirements, calculations, power budgets, validation results, etc. Rapidly iterate as design requirements and system features mature.
• Circuit board design: Develop the specification, architecture, and design of electronic circuits for motor control including consideration of processor requirements and integration, system timing and bus loading. Work hand in hand with the embedded systems lead and software counterparts to ensure success of the integrated system. Design hardware, source components, develop schematics, manage layout, and test prototypes to validate hardware.
• Testing and validation: Identify core test requirements and balance test time with test coverage. Interact with various design, manufacturing, and firmware teams throughout the project. Establish clear, concise hardware test plans, and identify necessary test sequences and functional verification testing.
Secondary Responsibilities:
• Establish great working relationships with team members and cross functional teams.
• Create electrical panel schematics and work closely with builders to checkout wiring and quickly correct mistakes.
Intrinsic: The role will require constant flexibility and a level of comfort working in a rapid-prototype environment. The projects and assignments will vary from week to week, so the candidate should ideally have robust experiences to draw from (e.g. Aerospace, Electric Vehicle development, Motorsport/Formula One) in order to operate effectively in this environment. The role will include interfacing with engineering management, our customers, certification authorities, operations, procurement, external suppliers, and fellow engineers.
Required Qualifications:
• Master’s degree from an accredited university in Electrical Engineering or a related discipline with at least 5 years of professional experience in aerospace or a related field (i.e. electric vehicle development); or equivalent experience/combined education.
• Excellent circuit board design skills and an analytical mindset with a track record of demonstrated success developing actual products in a development environment.
• Experience in PCB schematic creation.
• Experience in electrical equipment selection and hardware integration/abstraction.
• Experience in electrical panel design and layout.
• Competent in electrical fundamentals.
• Familiarity with C, C++, Python, and/or Labview
• Well versed in the fundamentals of serial communication protocols (CAN, LIN, Ethernet, Bluetooth, DP, etc.)
• Experience with designing and testing to meet DO-160 Environmental Qualification requirements is desired.
• Experience with HW design that meets certification requirements for lightning strike and HIRF is advantageous.
• Experience overseeing and/or preparing electrical system compliance test plans and reports in support of aircraft certification, along with direct experience working with the FAA and/or FAA DERs, or past experience as an FAA electrical systems DER would be highly desirable.



The Structures Company is an AA/EOE.
 
Job Number: 399
Job Location: Southern, CA
Rate: $55-$70/Hr., **DOE**
Per Diem: Yes
Duration: 12 Months
Start Date: ASAP
Input Date: 06/23/2020
Last Updated: 08/12/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
This role requires the candidate to thrive in a high paced environment and will have an integral role in advancing the next generation of electrically powered vertical lift aircraft.
Roles and Responsibilities:
Define: Generate conceptual layouts for critical systems. This includes high voltage systems to drive BLDC motors and low voltage systems to control key elements of the avionic and vehicle management systems. It is desired for the candidate to specifically take ownership of analog & digital circuits (MOSFETs, op-amps, switching regulators, gate drivers, microcontrollers, SPI, I2C, etc) for high power BLDC drive motors as other systems such as electro-mechanical actors. The candidate will participate in initial equipment conceptual development and carefully balance product specifications, process requirements, and lead-time limits. The engineer will define key requirements and take ownership of them through the design life-cycle.
Do: The Electrical Design Engineer will also take the lead designing a myriad of critical components that are the basis for the Butterfly Aircraft’s electrical propulsion systems. Areas of focus include BLDC motor drivers and the associated electrical components. The end application will require extreme levels of reliability and fault tolerance and therefore the systems and components designed by the electrical engineer will need to adhere to aerospace best-practices for flight critical vehicle management systems. Familiarity with DO254 and DO178 is desired. The ideal candidate will have a hand in developing new systems from the ideation stage and seeing them through to a flight-worthy component. Thus, the role will require experience designing, prototyping, and testing multiple iterations of the development PCBs and be competent in the skills and tools needed to undertake this effort.
Key Responsibilities:
• Start-to-finish hardware ownership: Specification, architecture, design, simulation, schematic, layout supervision, prototype, validation, and manufacturing of circuit boards. Thoroughly document design requirements, calculations, power budgets, validation results, etc. Rapidly iterate as design requirements and system features mature.
• Circuit board design: Develop the specification, architecture, and design of electronic circuits for motor control including consideration of processor requirements and integration, system timing and bus loading. Work hand in hand with the embedded systems lead and software counterparts to ensure success of the integrated system. Design hardware, source components, develop schematics, manage layout, and test prototypes to validate hardware.
• Testing and validation: Identify core test requirements and balance test time with test coverage. Interact with various design, manufacturing, and firmware teams throughout the project. Establish clear, concise hardware test plans, and identify necessary test sequences and functional verification testing.
Secondary Responsibilities:
• Establish great working relationships with team members and cross functional teams.
• Create electrical panel schematics and work closely with builders to checkout wiring and quickly correct mistakes.
Intrinsic: The role will require constant flexibility and a level of comfort working in a rapid-prototype environment. The projects and assignments will vary from week to week, so the candidate should ideally have robust experiences to draw from (e.g. Aerospace, Electric Vehicle development, Motorsport/Formula One) in order to operate effectively in this environment. The role will include interfacing with engineering management, our customers, certification authorities, operations, procurement, external suppliers, and fellow engineers.
Required Qualifications:
• Master’s degree from an accredited university in Electrical Engineering or a related discipline with at least 5 years of professional experience in aerospace or a related field (i.e. electric vehicle development); or equivalent experience/combined education.
• Excellent circuit board design skills and an analytical mindset with a track record of demonstrated success developing actual products in a development environment.
• Experience in PCB schematic creation.
• Experience in electrical equipment selection and hardware integration/abstraction.
• Experience in electrical panel design and layout.
• Competent in electrical fundamentals.
• Familiarity with C, C++, Python, and/or Labview
• Well versed in the fundamentals of serial communication protocols (CAN, LIN, Ethernet, Bluetooth, DP, etc.)
• Experience with designing and testing to meet DO-160 Environmental Qualification requirements is desired.
• Experience with HW design that meets certification requirements for lightning strike and HIRF is advantageous.
• Experience overseeing and/or preparing electrical system compliance test plans and reports in support of aircraft certification, along with direct experience working with the FAA and/or FAA DERs, or past experience as an FAA electrical systems DER would be highly desirable.
 
Job Number: t3262
Job Location: Southern, CA
Rate: $55-$70/hr.
Per Diem: Possible
Overtime: Possible
Duration: Long Term
Start Date: ASAP
Input Date: 06/23/2020
Last Updated: 07/15/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Electrical Engineer

Location: Fort Worth, TX
Duration: 12 months

Description:
Client is seeking a Circuit and FPGA Design Electrical Engineer with experience in PCB design to join our team.

In this position the engineer will design and develop complex electronic hardware systems for aircraft. A major focus of this mission critical engineering role will involve developing aircraft electronic systems. The engineer will be responsible for Circuit design, Field Programable Gate Array (FPGA) programing, and Printed Circuit Board (PCB) and Circuit Card Assembly (CCA) designs working on a cross functional team. Working on a cross functional team the engineer will be working with mechanical and software design teams to develop a complete qualified flight tested aircraft solutions.

The engineer will have an opportunity have an impact on the following areas: Requirements analysis/derivation, concept development, hardware architecture, component selection, schematic capture, reliability analysis (derating, thermal, signal integrity, power integrity, stability, overstress), design verification, system integration, and qualification.

Basic Qualifications:
- A BS Degree in Electrical Engineering or closely related technical field or equivalent experience/combined education
- Experience with circuit design concepts
- Experience in circuit analysis, troubleshooting, test instrumentation, and data analysis tools
- Experience with Printed Circuit Board (PCB) board design and Circuit Card Assembly (CCA) design
- Experience with VHDL, Verilog, or System Verilog languages to support FPGA firmware programing
- The technical ability to effectively define and interpret system level requirements and derive the requirements necessary to interface between lab and hardware
- The ability to work well in a teaming environment with other disciplines (Systems Engineering, Software Engineering, Mechanical Engineering, etc.)

Desired Skills:
- Experienced using Xilinx and/or Microsemi FPGAs
- Experienced with design and simulation tools (Xilinx Vivado, Microsemi Libero, Mentor QuestaSim)
- Experience with Perl, Visual Basic, and C/C++,
- DO 178C/254 verification
- High Speed and RF design
- Cadence schematic capture, PCB layout Allegro

Comments for Suppliers:
Electrical Engineer - Circuit Design, FPGA Firmware Programing, and Printed Circuit Board (PCB) and Circuit Card Assembly (CCA) Designer

Level:
Level 4: BS+16 YRS or MS+14 YRS
 
Job Number: 20-06504
Job Location: Ft. Worth, TX
Per Diem: split
Overtime: possible
Duration: 12 months
Start Date: 7/1/2020
Input Date: 06/18/2020
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 4620 E 53RD ST
City, State: DAVENPORT, IA 52807
Phone: 312/502-4795
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Electrical Engineer

Job ID # 2020-11436

Contract Opportunity

Location: Sterling Heights, MI

Industry: Aerospace & Defense

Minimum Education: Bachelor’s Degree

Minimum Experience: 3 Years

 

What You’ll Do:

Support the lead, design and development of specialized test tools and data collection software programs to Verify and validate functional performance of hardware to meet engineering development, regression testing, government witness testing, and independent software tests in compliance with design requirements.
Work with a group of lab Design & Development engineers guiding them through procedures on how the test system operates.
Design other tools to support Power Testing, Real-Time Operational Testing, CAN/1553/GbE/UBIM Testing, User friendly LabVIEW application S/W to control VXI, PXI, PCI, and GbE instruments, GO, NO-GO and Failure Area indicators, Electronic Personality Interface Adapters and high density common interfaces for quick change of LRU’s on test console.
Also responsible for:
Measurement repeatability, matched data storage by part number and serial number, Tests capability for Electronic and Electro-Optical LRU’s and subsystems
Provide support to Abrams and Stryker production test equipment and product validation
Demonstrate problem solving skills to investigate and expedite corrections to field and production issues
Provide support and maintenance for laboratory conventional and computerized test equipment. At a minimum this includes selection, direction for procurement, configuration activities, and periodic/preventative maintenance, repair, and calibration of test assets on and off sites.
Design electronic circuits, functions, and sub-systems necessary to evaluate and test GDLS products at the sub-system and system level. At a minimum, this includes analog and digital circuits, voltage translation, switching functions, interconnect cables, monitor panels, test boxes, and ensure design include proper grounding and shielding principles to minimize test system and interface effect on test samples.
Provide documentation for designs, processes & procedures.
Participate in design reviews offering constructive criticism to ensure sound designs are implemented, and placement of documents into configuration management system.
 

What You’ll Need:

Highly desirable that the candidates know labview software development for test equipment.
Capable of operating Test Instrumentation, including Oscilloscopes, DMMs, Function Generators, and DAQs, and interpreting measurements.
Experience developing software code, such as Visual Basic, C++, LabVIEW
Experience developing electronic circuits and cables
Experience developing electronic schematic drawings Skilled in troubleshooting electronic circuits Experience developing test code/scripts to control NI Data Acquisition modules is a plus.
Must have good computer skills (email, MS-Office, internet) Able and willing to travel domestically, and internationally
Able and willing to work occasional overtime and/or 2nd-shift to meet deadlines.
Excellent written and verbal communication skills.
 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

 

Education & Experience:

Bachelor’s Degree in Electrical, Electronics, Mechanical, or Computer Engineering combined with 2 + years of relevant experience.
 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

 
 
Job Number: Job ID # 2020-11436
Job Location: Sterling Heights, MI
Rate: Open
Per Diem: No
Overtime: Possible
Input Date: 06/18/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
In this position the engineer will design and develop complex electronic hardware systems for aircraft. A major focus of this mission critical engineering role will involve developing aircraft electronic systems. The engineer will be responsible for Circuit design, Field Programable Gate Array (FPGA) programing, and Printed Circuit Board (PCB) and Circuit Card Assembly (CCA) designs working on a cross functional team. Working on a cross functional team the engineer will be working with mechanical and software design teams to develop a complete qualified flight tested aircraft solutions.

The engineer will have an opportunity have an impact on the following areas: Requirements analysis/derivation, concept development, hardware architecture, component selection, schematic capture, reliability analysis (derating, thermal, signal integrity, power integrity, stability, overstress), design verification, system integration, and qualification.

Basic Qualifications:
- A BS Degree in Electrical Engineering or closely related technical field or equivalent experience/combined education
- Experience with circuit design concepts
- Experience in circuit analysis, troubleshooting, test instrumentation, and data analysis tools
- Experience with Printed Circuit Board (PCB) board design and Circuit Card Assembly (CCA) design
- Experience with VHDL, Verilog, or System Verilog languages to support FPGA firmware programing
- The technical ability to effectively define and interpret system level requirements and derive the requirements necessary to interface between lab and hardware
- The ability to work well in a teaming environment with other disciplines (Systems Engineering, Software Engineering, Mechanical Engineering, etc.)

Desired Skills:
- Experienced using Xilinx and/or Microsemi FPGAs
- Experienced with design and simulation tools (Xilinx Vivado, Microsemi Libero, Mentor QuestaSim)
- Experience with Perl, Visual Basic, and C/C++,
- DO 178C/254 verification
- High Speed and RF design
- Cadence schematic capture, PCB layout Allegro

Release Comments: Electrical Engineer - Circuit Design, FPGA Firmware Programing, and Printed Circuit Board (PCB) and Circuit Card Assembly (CCA) Designer
 
Job Number: 132470
Job Location: Fort Worth, TX
Input Date: 06/18/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Valerie White
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Electrical Engineer

Location: Vandenberg AFB, CA
Duration: 8 months

Description:
Facility Systems Electrical Engineer - Member of the Engineering and Infrastructure department whose responsibilities include the design, operation and maintenance of ground (fixed and portable) electrical power systems used at all client Sites.

Assignments will include electrical engineering support of, but not limited to:
- Design, operation, maintenance of medium and low voltage electrical power systems supporting launch complexes and related facilities, including circuitry, cabling, electrical components, instrumentation, and controls
- Assist technical staff and contractors in the design, operation, and maintenance of new/existing electromechanical systems, including insight into the mechanical operation of these systems
- Develop new and revise existing operational test procedures and maintenance documentation associated with launch facility electromechanical systems, primary and backup power (medium and low voltage (12kV, 480V, 120V, 24V control, etc.) systems
- Coordination of Base High Voltage supply infrastructure and readiness in support of Launch Operations
- Design, operation, maintenance of Programmable Logic Controllers (PLCs), or similar firmware controllers, supporting launch complexes and related facilities
- Support development activities for new upcoming launch systems, customer funded special studies, mission unique modifications, or other major facility modifications and/or system upgrades
- Disposition of corrective actions and coordination with cross-functional groups to identify/implement solutions and drive strategic improvements relative to launch operations
- Apply technical engineering knowledge and expertise in the completion of all aspects of an identified project including technological considerations, cost/financial considerations, administration and schedule management
- Develop and coordinate technical portions of proposals, statements of work and contract specifications. Apply knowledge of regulatory and certifying agency requirements to ensure product and/or service is in compliance. Apply knowledge of functional testing requirements to ensure product and/or service meets or exceeds customer expectations
- Must understand and comply with (EWR 127-1) Range Safety design and operational requirements in performance of duties
- Support maintenance and improvement projects in close coordination with Operation Systems Engineering group to ensure system readiness in support of launch vehicle processing

External Basic Requirements:
- Bachelor’s Degree is required (Electrical Engineering degree is preferred), will consider Mechanical or Aerospace Engineering Degree with equivalent real-world work experience.
- AT LEAST 2 years of experience working electrical/power engineering in an Aerospace, Utilities, or similarly complex environment. A Master’s Degree in Electrical Engineering may be used to satisfy 2 years of experience.
- Excellent communication, writing and oral skills and have the ability to work with a wide range of team members including customers and subcontractors
- Proficient knowledge in Microsoft Office products such as Excel, Word, Power Point and Project
- Experience with Computer Aided Design software such as AutoCAD, Revit, and Tekla
- Work will primarily be in an office type environment, with some field operations and maintenance support (launch pad and processing facilities) involving certification for working at height, working in confined space, and working in areas of stored hazardous rocket propellant commodities and high pressure gases.

External Preferred Qualifications:
- Professional experience working with large, complex mechanical systems in an equivalent industrial process is preferred
- Knowledge of industry standards such as National Electrical Code NFPA 70, NFPA 70E

Requires a bachelors degree and 0-4 years of experience (for external candidates only). Provides solutions to a wide range of difficult engineering/scientific problems. Solutions are imaginative, thorough, practical, and consistent with organization objectives. Contributes to the completion of specific programs and projects. Failure to achieve expected results would typically result in serious project delays. Works with minimal direction. Independently determines and develops approaches to problems. Work is reviewed upon completion for adequacy in meeting objectives. Receives guidance only on unusual or complex problems or issues.
 
Job Number: 20-06541
Job Location: Vandenberg AFB, CA
Per Diem: split
Overtime: possible
Duration: 8 months
Start Date: 6/30/2020
Input Date: 06/16/2020
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 4620 E 53RD ST
City, State: DAVENPORT, IA 52807
Phone: 312/502-4795
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer III ( Chandler, AZ ) 9899904

Description:
Electrical Engineer III ( Chandler, AZ ) 9899904
12 Month Contract

Pay rate: Open

Note: Active Secret Clearance Required

Experience in one or more of the following areas:
a) Ionizing radiation effects analysis & test for electronics systems
b) material science with emphasis on x-ray interactions with matter
c) electromagnetic effects (cable coupling, transient prediction/mitigation) from radiation (ionizing and non-ionizing radiation). Should be familiar with computational tools for modeling and prediction of effects.

Preferred Qualifications:
Preferred advanced degree (MS minimum) in physics, electrical engineering, material science, or mechanical engineering. Active Secret Security clearance or Top Secret is highly preferred

High dose rate (radiation) analysis and test (MIL-STD-883), computational FTDT methods, electromagnetic testing (MIL-STD-464/MIL-STD-461), familiarity with nuclear weapon effects, experience in testing/analysis of natural space radiation environment (TID; MIL-STD-883, SEE; JESD57/ASTM F1192), EEE part selection for aerospace systems, x-ray/gamma/beta/ion transport analysis.
 
Job Number: 9899904
Job Location: Chandler, AZ
Rate: Open
Per Diem: Yes
Overtime: yes
Duration: 12 months
Start Date: ASAP
Input Date: 06/07/2020
Last Updated: 06/25/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronics Technician

Description:
Electronics Technician

Job ID # 2020-11451

Contract Opportunity

Location: Fort Worth, TX

Industry: Aerospace & Defense

Minimum Education: Associate’s Degree

Minimum Experience: 3 Years

 

What You’ll Do:

Support, testing and basic Laboratory operations responsibility.

Some climbing on ladders may be required as well as lifting up to 25lbs.

Fabrication of electronic/electrical chassis', cable harnesses, and mechanical rack fabrication using development engineering drawings.

Work independently, discuss technical issues with customers and working with vendors.



What You’ll Need:

Can follow directions
Accomplish work in a timely manner
Ask questions to Build Leads about job tasks
A Team Player
Attention to detail
Has a basic knowledge of interpreting engineering drawings/schematics
Dependable and willing to learn
 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.



Education & Experience:

Associate’s Degree combine with 3 + Years of relevant work experience.
 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/
 
Job Number: Job ID # 2020-11451
Job Location: Fort Worth, TX
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 12 Months
Input Date: 06/23/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronics Technician   

Description:
Electronics Technician   

Job ID # 2020-11437

Contract Opportunity

Location: Sterling Heights, MI

Industry: Aerospace & Defense

Minimum Education: Technical Degree

Minimum Experience: 5 Years

 

What You’ll Do:

Maintain and repair electronic components and equipment in our vehicles and labs.
Involve electro-mechanical and environmental testing as well as data acquisition of tested hardware of electronics in the lab, on vehicles and at test sites.
Field travel to test sites is required to work as a part of an Engineering team to deliver high quality products to our customers using innovative solutions and creative thinking.
 

What You’ll Need:

Team oriented, flexible and willing to work occasional overtime hours (up to 15 hours).
MUST meet ASR
Job may require travel to military bases for 2-4 week at a time
Must be able to obtain appropriate site clearances
Must have electro-mechanical AND environmental testing background
Must have solid knowledge of the following electronic transducers and their associated signal conditioning
Pressure transducers, strain gages, piezoelectric accelerometers, LVDT& string Pots, load cells, hot wire anemometers, Voltage and current, pitot tubes, flow meters, T/C
Solid knowledge of data acquisition techniques and hardware. A working knowledge of Signal Express
Software package or SOMAT Data Acquisition systems a plus.
Working knowledge of Lab View Programming a plus
Hydraulic test experience required
Solid computer skills and MS office a must
Working knowledge of Abrams Main Battle Tanks and Stryker Family of Vehicles a plus
Working knowledge of calibration and metrology techniques a plus
Needs Soldering skills, wire harness manufacturing experience
Must be able to represent Environmental Test and GDLS at customer sites
 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

 

Education & Experience:

Technical Degree combined with 5 + Years of relevant experience.
 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

 
 
Job Number: Job ID # 2020-11437
Job Location: Sterling Heights, MI
Rate: Open
Per Diem: No
Overtime: Possible
Input Date: 06/18/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Engineering Technician-Intermediate

Description:

We are seeking a motivated Engineering Technician for a new seven-acre greenhouse. This position will be located in Marana, AZ, reporting to our Facilities Manager.
This position will implement the site’s robust automation system support program. This program will include preventative maintenance, real time troubleshooting/debugging and continuous improvement.
Key Responsibilities:
· Perform scheduled maintenance on a wide variety of automation equipment including but not limited to: conveyor systems, item counting machines, pumps, valves, environmental control systems and other PLC controlled automation systems
· Work with growers and functional teams to diagnose and troubleshoot issues arising from daily operation of automated material handling systems
· Interact with computerized maintenance management systems (CMMS) to document maintenance events
· Collaborate with a team of engineers, biologists, scientists and more to maintain automation systems and provide continuous improvement to existing designs

 


Required Skills/Experience:· Associates degree or certified training in automation/engineering related field
· High degree of mechanical aptitude, and general knowledge of equipment reliability & maintenance
· 2-5 years of hands on experience troubleshooting automation systems with a holistic approach including
o Mechanical system adjustment
o Electrical diagnostics
o Software/HMI manipulation
· Familiarity with Microsoft Office suite of tools
Desired Skills/Experience:
· Conveying equipment or packaging system experience
· Basic familiarity with agriculture or horticulture
 
Job Number: 2010114817
Job Location: Marana, AZ
Duration: 24 months
Input Date: 06/26/2020
Last Updated: 08/12/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Amy Kloeppinger
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003OsVIQA0&URLSource=cjhunter

Equipment Services Technician

Description:
PDS Tech is seeking candidates to fill an Equipment Maintenance Tech position in Pleasanton, CA

The “Equipment Services Technician” position has the following responsibilities for the Engineering Services group. This group supports the Pleasanton manufacturing plant by maintaining, calibrating and repairing laboratory equipment. The candidate will also be responsible for participating in several other activities such as process improvements (8-step kaizen events, 6S and JDI), Technical writing and researching and ordering parts/tools.


Responsibilities:

  • Performs maintenance, testing, troubleshooting, calibration and repair on a variety of manufacturing and testing Instrumentation.
  • Carries out routine repairs on a daily basis.
  • Provides technical support to internal customers on operational or maintenance aspects of system equipment.
  • Works independently and prioritizes work schedule of service calls a majority of the time, may require direction from Lead or Supervisor sporadically.
  • Maintains own tool inventory to ensure adequate supply to perform duties.
  • Works with team and administrator to assure there is adequate supply of spare parts in stockroom (Specifies and requests purchase of components).
  • Performs all administrative duties including documenting maintenance and repair calls in SAP as well as completing required documentation and reports.
  • Proficient and compliant with ISO standards and practices.

Qualifications/Experience/Skills:
  • Education: Minimum AS in Electronics/mechanical/electro-mechanical, BS in Engineering preferred
  • Experience: 1-2 years repair experience (Field Service or In-House Service)
  • Experience with the following is highly desirable:
  • Robotic instrumentation (especially HPLC, Hamilton, Bravo, and Biomek FX)
  • Handling Hazardous materials
  • Handling Hazardous waste
  • Liquid handling Robots
  • Pneumatic instruments
  • Mass Spectrometry
  • Knowledge of GMP, ISO 9001 and or 13485 Standards
  • Experience with general handheld tools plus multi-meters and other electronic test equipment.
  • Experience with manual pipetting
  • Broad knowledge of state of the art optical imaging, precision motion control, microfluidics, automation systems, and signal processing technologies.
  • Experience with FDA regulated system development/design control is a plus.
  • Proficiency with Solidworks is a plus.
  • Advanced technical writing and verbal skills to produce reports, documents, and communicate with customers.
  • Must be able to work effectively alone under minimal supervision and complete assigned work targets in a timely manner.
  • Excellent organizational skills, including the ability to efficiently evaluate, prioritize and handle multiple and changing work tasks and priorities.
  • Excellent verbal and written communication skills and the ability to interpret and summarize scientific/technical results in a clear, concise, accurate manner.
  • Demonstrated ability to formulate and solve problems.
  • Must be flexible to work swing shift, weekends and overtime if needed.

 
Job Number: 2010115382
Job Location: Pleasanton, CA
Duration: 12 months
Input Date: 06/08/2020
Last Updated: 08/12/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Patrick Mahoney
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: cecjdallasav@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003OuGDQA0&URLSource=cjhunter

F5 Engineering Ground Test / Structural Laboratory Technicians (1st Shift)

Description:
PDS Tech is seeking 1st and 2nd shift F5 Engineering Ground Test / Structural Laboratory Technicians in Stratford CT.

The Structural Lab Technician should be capable of working from engineering drawings with limited guidance to fabricate and assemble structural and dynamic aircraft component test facilities.
  • Must be able to diagnose and repair hydraulic, mechanical and controls systems associated with test facilities required to support Engineering Ground Test Development programs.
  • Must possess a strong mechanical and fabrication background with emphasis on erecting mechanical structures to facilitate aircraft component testing.
  • Must possess a strong aptitude for industrial hydraulic component fabrication and assembly.
  • Must be able to read and interpret engineering mechanical drawings and fluid power schematics.
  • Must be able to work from elevated work platforms at various heights.
  • Must be willing and able to work in inclement weather.
  • Must be capable and comfortable working within a diverse team environment.
  • Must possess skills and aptitude to operate test facilities and data acquisition systems.


 
Job Number: 2010113683
Job Location: Stratford, CT
Per Diem: No
Duration: 12 months
Input Date: 04/17/2020
Last Updated: 08/12/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003OnLJQA0&URLSource=cjhunter

F7 Ground Test and Aircraft Instrumentation Technician

Description:
PDS Tech is seeking an F7 Ground Test and Aircraft Instrumentation Technician in Stratford CT.
 
The ideal candidate will work from Engineering Requests, Procedures and Drawings with limited guidance to Fabricate, Install, Check-out, Diagnose, and Trouble-Shoot Instrumentation Data Acquisition Systems/Sensors in support of Ground and Flight Test Programs.

This position requires:

  • planning, building and terminating the various cable harnesses required in the Instrumentation System.
  • Assisting in performing System and Sensor Calibrations.

The working environment consists of the Structural Test Lab, Remote Test Stands (Engineering & Quality Assurance) as well as Offsite support to include Aircraft Instrumentation.

This position requires a good working knowledge of Instrumentation Sensors, Slip Rings and Data Acquisition Systems.

Must possess:

  • A strong Mechanical and Electrical background and familiarity with Strain Gauges and their circuitry, linear displacement and vibration transducers, measurement systems, instrumentation wiring and documentation.
  • Ability to perform Strain Gauge installations (preferred)
  • Must be able to work from elevated work platforms at various heights.
  • Must be willing and able to work in inclement weather.
  • Must be capable and comfortable working within a diverse team environment.

 
Job Number: 2010111535
Job Location: Stratford, CT
Per Diem: No
Duration: 12 months
Input Date: 03/11/2020
Last Updated: 08/12/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Roger Greco
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fiuZQAQ&URLSource=cjhunter

Flammability Engineer

Description:
Flammability Engineer

Position Summary:
The Flammability Engineer will support cabin and cargo engineering teams in the review and approval of interior engineering flammability data in support of major and minor changes to aircraft type design.

Responsibilities:
  • Ensure aircraft type design complies with type certification requirements for cabin and cargo material flammability requirements.
  • Generate certification plans and support the creation of compliance statements in support of major projects.
  • Provide solutions to issues arising during certification projects and provide status to Management on these key issues.
  • Coordinate with suppliers during development phase of the equipment to ensure that compliance to manufacturer's requirements are satisfied.
  • Define the certification requirements to support aircraft modification in accordance with customer's request.
  • Review and approve manufacturer's and vendor test plans and reports, including witnessing testing as required.
  • Ensure that the design can be certified and all the necessary data for test and certification is produced.
  • Provide input and feedback on matters pertaining to certification between equipment suppliers, customers and manufacturer's engineering organizations.
  • Generate reports as required. Reviews and approves supplier’s compliance reports.
  • Create and ensure that the engineering is robust and meets integrated project requirements.
  • Perform other tasks as assigned



 

Experience / Skills / Training: 
  • 2 - 5 years experience
  • Clear and in-depth knowledge of FAA, European and other Foreign National Authority aircraft certification regulations pertaining to Part 23 or 25 cabin interior and flammability requirements
  • A good understanding of the Part 23 or 25 certification process (TC & STC), regulations, orders, notices and policies
  • Knowledge on Maintenance Manual: AMM, IPC, WDM, SRM
  • Knowledge on Operating Manual: AFM, FCOM, CCOM, MMEL
  • Experience on Environmental Qualification and Airworthiness


Education / Special Qualifications: 
Bachelor's or master’s degree (B.S or M.S.) in Mechanical, Aerospace
 
Job Number: 2010112374
Job Location: Mobile, AL
Duration: 6 months
Input Date: 03/30/2020
Last Updated: 08/12/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Angela Jones
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fmoKQAQ&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
This position is for a Flight Test Mechanical Design Engineer that will support the Integrated Fighter Group (IFG) Flight Test team working on F-35, F-16, or F-22 aircraft. For full details please read on.

#Duties:
* Support the Integrated Fighter Group (IFG) Flight Test team working on F-35, F-16, or F-22 aircraft
* Perform mechanical design activities for the installation of flight test equipment and data system components
* Responsible for releasing engineering documents, work instructions, supporting airworthiness documentation, monitoring fabrication activities, coordinating lab procedures, and supporting aircraft checkout and flight operations
* Development, installation oversight, and validation of 3D CATIA flight test mechanical designs.
* Coordination with suppliers, internal and external integrated product teams, management and the customer.
* Technical engineering support for installation and testing at CONUS and OCONUS locations.
* Engineering liaison for flight test and instrumentation modification activities.
* Produce and read engineering drawings, schematics and technical procedures
* Develop troubleshooting plans and discrepancy resolution
 
Job Number: 132411
Job Location: Fort Worth, FL
Input Date: 06/18/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Valerie White
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Framework and Simulation Software Engineer

Description:
This engineer will play a key role in a small, fast-moving team and participate in architecture design and implementation for our electric-powered, fly-by-wire aircraft. This engineer will work closely with the hardware, mechanical, integration, and flight testing teams to design, develop, test and improve system-level behaviors.

Specifically this role has an emphasis on core framework code and flight simulation.

Qualifications
• University degree in computer science or computer engineering
• At least 2 years full time industry experience
• Expert knowledge of object-oriented programming methodology and multi-layered system architectures
• Expert knowledge of C++
• Expert knowledge of multi-threaded systems
• Experience with modern integrated development environments and debuggers
• Basic understanding of version control technologies
• Exposure to other languages such as: python, C#, C, SQL

Desired Attributes
• Positive attitude
• Willingness to be flexible and learn new technologies
• Ability to work inside team



The Structures Company is an AA/EOE.
 
Job Number: 388
Job Location: Northern CA
Rate: OPEN - **DOE**
Duration: DIRECT POSITION
Start Date: April-May
Input Date: 04/11/2020
Last Updated: 07/15/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Ground Test Engineer

Description:
PDS Tech, Inc. is seeking a Ground Test Engineer, in Stratford, CT
Description:
  • Responsible for specific discrete tasks covering all aspects of Ground Testing helicopter components and systems.
  • Requires application of all Mechanical/Aerospace Engineering disciplines to a wide variety of technical problems.
  • Typical tasks include detailed test planning, coordination with internal and external customers, test conduct, use of computer data analysis tools, and generation of test plans and reports.
  • Ground Test Engineers are responsible for final conclusions and recommendations on the performance, safety, qualification, and adequacy of tested components and systems.
  • This process may involve test and evaluation of components, assemblies and systems including main and tail rotor dynamic components, rotor drive systems, flight control systems, fuel systems, hydraulic systems, pneumatic systems, mission equipment, and airframe structure.
  • Test programs typically involve full scale fatigue and static evaluations of dynamic components, main and tail rotor whirl tests, airframe static tests, airframe shake tests, dynamic stability, component testing, and the evaluation of aircraft system level performance prior to flight.
  • Tasks also include the development and implementation of test procedures used to validate the performance of installed aircraft systems and components during final assembly, supporting and establishing operating limitations for both flight test programs and fielded aircraft, and oversight of supplier performed component qualification efforts. 
  • Support and manage the development, coordination and conducting of technical tests and evaluation of engineering design concepts and understands and can develop and analyze test plans.
  • Recommendation of design or test methods and statistical process control procedures for achieving required levels of product reliability.
  • Compilation and analysis of performance reports

 
Experience/Qualifications 
  • BA/BS candidates require 4-7+ years’ experience, 
  • MA/MS candidates require 2-5+ years’ experience, 
  • PhD candidates require 0-2+ years’ experience. 

 
Job Number: 2010113302
Job Location: Stratford, CT
Duration: 12 months
Input Date: 03/16/2020
Last Updated: 08/12/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Roger Greco
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fr1SQAQ&URLSource=cjhunter

Ground Test Project Engineer

Description:
PDS Tech is seeking a Ground Test Project Engineer in Stratford, CT
 
An experienced professional is needed for the Future Attack Reconnaissance Aircraft (FARA) program.
 
The candidate will support and manage the development, coordination and reporting of Ground Tests, Supplier Qualification activity and subcontractor management.
 
They will act as Project Engineer to provide project management, metrics and business analysis including support of Earned Value Management System monthly rhythm.
 
They will:
  • Integrate program requirements for functional facilities and other with overall company demand for Ground Test services.
  • Support and manipulate Microsoft based tools in support of project schedule and status.
  • Communicate with other program integrated product teams.
  • Compile and analyze performance reports.


.
The ideal candidate will have:
  • Superior business and data skills,
  • Knowledge of IMS based project management and can work in a team environment.
  • Understanding of Aerospace, Helicopter and / or development program experience
  • Knowledge of mechanical / structural design and test

 
Looking for someone who can jump in, learn the tools and support this ambitious test program.  Someone who has been around development programs, engineering and / or even test.  The job is Project Engineering and will be asked to support those engineers who are running the test, enable them and support the Programmatics.
 
 
 
Job Number: 1910110034
Job Location: Stratford, CT
Duration: 6 months
Input Date: 12/16/2019
Last Updated: 08/12/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Mike Flanery
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002faXsQAI&URLSource=cjhunter

Ground Testing Engineer-RAST

Description:
PDS Tech, Inc. is seeking a Test Reliability, in Stratford, CT
Description:
Ground Test Supplier Engineering

  • Primary reason for this sub-contractor is to support unique RAST Probe and the unique issues encountered by the supplier meeting requirements. 
  • Support and manage the development, coordination and conducting of supplier qualification tests and evaluation of engineering design concepts and understands and can develop and analyze, reliability test plans.
  • Recommendation of design or test methods and statistical process control procedures for achieving required levels of product reliability.
  • Compilation and analysis of performance reports

  • Must have understanding of supplier component qualification process specifically have been exposed to the client supplier qualification process and norms.
  • Supplier qualification management / familiarity with RAST system.
  • Experience/ working relationships with Indal, CH-148 Team required due to schedule
  • Candidate must have a degree in Mechanical Engineering and 20+ years of experience.
  • Must be able to travel including out of the country. 

 
Job Number: 2010113303
Job Location: Stratford, CT
Duration: 12 months
Input Date: 03/24/2020
Last Updated: 08/12/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Roger Greco
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fr1XQAQ&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Helicopter Dynamics Analyst

Description:
The ideal candidate will support, perform and manage a Dynamics Analysis function for Rotorcraft Mechanical Systems, which applies Dynamics theory to the design and analysis to verify designs have the desired Dynamics characteristics.

These activities focus on the analysis of complicated mechanical systems mainly via by mathematical modeling of systems, as well as the support of component and system level testing to verify satisfactory Dynamic characteristics.

Specific projects will include the design, analysis and test of absorber technologies and seat isolation technologies to be flight tested on developmental rotorcraft, and support of flight testing of aerial refueling probes to verify adequate dynamic response characteristics.

Knowledge and experience of Finite Element Modeling tools such as NASTRAN/PATRAN is required, and experience with performing Rap Testing using LMS equipment.

This is a senior level position requiring 30+ years of experience in the field of Helicopter Dynamics
 
Job Number: 2010115371
Job Location: Stratford, CT
Per Diem: split
Overtime: possible
Duration: 15 months
Start Date: ASAP
Input Date: 06/16/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

In process Inspector

Description:
PDS Tech is currently recruiting for an InProcess Inspector in the Hollister, CA area.  This is a direct hire position for 2nd shift. 

This role is for our second shift and the required hours will tentatively be between 4pm-2:30am, with the potential for overtime and pay differential.

Duties:
  • Performs limited repetitive dimensional and electrical inspection using basic equipment and established procedures with minimum supervision of a higher inspector or supervisor.
  • Need to have mechanical aptitude with an ability execute good record keeping practices as a major part of the duties.
  • Must be detail-oriented and adept at accuracy.
  • Must be flexible and able to work with a variety of different people and in different areas depending on business need.
  • Interpret drawings and written work instructions.
  • Uses a variety of precision measuring instruments including electrical test equipment including calipers, and micrometer.
  • Schedules, plans, and executes assigned or delegated tasks in an efficient manner.
  • Prioritizes workload such that production delays are minimized or eliminated.
  • Ability to interface directly with customer representatives.
  • Perform other related duties as assigned.
  • Performs limited repetitive dimensional and electrical inspection using basic equipment and established procedures with minimum supervision of a higher inspector or supervisor.
  • Must possess basic mathematical abilities and be computer literate and is comfortable using different applications.
  • Must be able to lift up to 35 lbs.

Must be able to support mandatory overtime as needed
 
Qualifications:

  • Knowledge in the use of basic mechanical measuring tools (including calipers, and micrometer)
  • Ability to interpret basic drawings and instructions
  • Good written, verbal, mathematical and analytical skills
  • High School degree
  • IPC 600, 610 and JStandard certification preferred

 
 
Qualifications:
  • Knowledge in the use of basic mechanical measuring tools (including calipers, and micrometer)
  • Ability to interpret basic drawings and instructions
  • Good written, verbal, mathematical and analytical skills
  • High School degree
  • IPC 600, 610 and JStandard certification preferred

 
Job Number: 1910101126
Job Location: Hollister, CA
Duration: 0 months
Input Date: 12/11/2019
Last Updated: 08/12/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Pam Zack
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033dq7QAA&URLSource=cjhunter

InProcess Inspector

Description:
PDS Tech is currently seeking InProcess Inspectors for Hollister, CA
 

Description:  


This position requires the ability to perform limited visual, mechanical and electrical inspection functions in manufacturing areas under minimum supervision.  The individual must be dedicated to the quality function and a drive to enhance the quality of both the product and processes. 
 
  • Performs limited repetitive dimensional and electrical inspection using basic equipment and established procedures with minimum supervision of a higher inspector or supervisor.
  • Most work is of a lower level technical nature with record keeping as a major part of the duties.
  • Interpret drawings and written work instructions.
  • Uses a variety of precision measuring instruments including electrical test equipment.
  • Schedules, plans, and executes assigned or delegated tasks in an efficient manner.
  • Prioritizes workload such that production delays are minimized or eliminated.
  • Ability to interface directly with customer representatives.
  • Perform other related duties as assigned.
  • Performs limited repetitive dimensional and electrical inspection using basic equipment and established procedures with minimum supervision of a higher inspector or supervisor.
  • Most work is of a "go/no-go" nature.
  • Interpret basic drawings and instructions.
  • Uses a variety of precision measuring instruments.
  • Other functions that may be assigned.

 
  • High School Diploma,  college-level business courses a plus
  • Knowledge in the use of basic mechanical measuring tools
  • Ability to interpret basic drawings and instructions
  • Basic computer skills, MS Office knowledge
  • Good problem solving skills
  • Good written, verbal, mathematical and analytical skills
  • United States Citizen  

 
Job Number: 1810088645
Job Location: Hollister, CA
Duration: 3 months
Input Date: 10/30/2019
Last Updated: 08/12/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Pam Zack
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mci4AAA&URLSource=cjhunter

Jr. Mechanical Engineer

Description:
Interprets customer specifications to define requirements for mechanical designs.
• Applies the Autodesk Inventor 3D CAD system to create mechanical layouts and drawings.
• Designs mechanical and electromechanical assemblies using design for manufacturing (DFM), design for assembly (DFA) principles.
• Develops detailed fabrication and assembly drawings, performs tolerances analysis, design studies and trade studies.
• Specifies mechanical components, standards and mechanical best practices.
• Troubleshoots and resolves mechanical manufacturing and assembly failures.
• Support testing, installation, operation, maintenance and repair of electromechanical equipment.
• Generates project cost estimates and maintains project budgets and schedule.
• Performs thermal and structural analyses and generates analysis reports.
• Generates engineering design change orders and reviews the work of peers.


• In persuit of a Bachelor of Science degree in Mechanical Engineering or Mechanical Engineering Technology.
• 0-3 years experience in mechanical engineering design of electromechanical equipment and systems.
• Practical experience with computer aided design and analysis software tools.
• Good communication skills
• Completed statics/dynamics, vibration and fluid dynamics course work.
 
Job Number: B4110
Job Location: Northwest, MA
Rate: $29-$40
Per Diem: Possible
Overtime: Possible
Duration: 6+ months
Start Date: 6/22/2020
Input Date: 06/17/2020
Last Updated: 08/12/2020
Firm Name: ADVANCED TECHNOLOGY
Attention: Brittany
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: brao@advancedtechno.com
Website: www.advancedtechno.com

Landing Gears Stress Analysis Engineer - Mechanical Systems

Description:
We have a need for a Stress Engineer with Landing Gears experience.
Mechanical Systems Stress Engineer (FEM, Composites, and Hypersizer are secondary).
Mechanical Systems - Control systems, any mechanical moving part
Strong hand calcs vs FEM. More metallics than composites.

Qualifications

• Bachelor’s degree from an accredited institution, with a concentration in a relevant Engineering discipline.
• Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures using Femap as a pre and post processor.
• Minimum 8 years as a Stress Engineer.
• Minimum 5 years of applicable experience in the analysis of Mechanical Systems Structural Components using strength of materials and finite element based methods with more emphasis on Hand Calcs methods using Excel.
• Minimum 3 years experience on Landing Gears Analysis.
• Experience with free-body diagrams and classical stress analysis techniques
• Excellent verbal and written communication skills
• Excellent organizational and problem-solving skills
• Excellent computer skills, including Outlook, Word, Excel and PowerPoint
• Applicants must be “U.S. persons” as defined by the ITAR
Preferred Skills and Experience
• Hands-on experience with composites part fabrication and assembly processes and proficiency in Hypersizer a plus
• Pilot, aircraft homebuilding and rapid prototyping experience a strong plus
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
• Experience with manufacturing-based ERP systems, such as Oracle, is a plus

The Structures Company LLC is an AA/EOE.
 
Job Location: Mojave, CA
Rate: $75-85/hr DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-Term
Start Date: ASAP
Input Date: 06/09/2020
Last Updated: 08/12/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: ChrisSheets@thestructurescompany.com
Website: www.thestructurescompany.com

Loads & Dynamics Engineer 3 & 4

Description:
Job Description:
  • Support loads and/or structural dynamics assessments for various production and developmental aircraft and weapons products at the St Louis and surrounding sites.They will be assigned to teams that design, analyze, and test products to assess the impact of launch, flight and landing environments / maneuvers on vehicle structural response and to predict structural loading and stiffness requirements for all parts and sub-systems.

Required:
  • Demonstrated experience in aerodynamics, structural Analysis, structural dynamics, or stability and control.
  • Experience in Modelling & Simulation and Tools & Process development.
  • Demonstrated problem-solving skills.
  • Possess interpersonal communication (written & verbal) skills in a team oriented environment.
  • Ability to interact professionally with customer, supplier, field & production representatives.
  • Requires Bachelor's degree in an engineering from an accredited course of study - Aerospace, Mechanical or Civil Engineering
  • Some positions require the ability to obtain a US Security clearance, which requires US Citizen; some require US person for ITAR purposes.  


 
 
Job Number: 2010110794
Job Location: Saint Louis, MO
Duration: 12 months
Input Date: 01/16/2020
Last Updated: 08/12/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Elisa Petersen
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002ffBdQAI&URLSource=cjhunter

MACHINE OPERATOR-2nd Shift

Description:
MACHINE OPERATOR
As a Machine Operator, you'll be trained how to operate each machine utilized in production of insert chip technology secured cards. You will be responsible for the set up and operation of the machines and will program computer batches from an order ticket to load data. In this role you will perform quality checks, confirm quantity produced, and ensure the batch is correct per the job ticket. A great machine operator is reliable and able to work with attention to detail and safety standards. The overall goal of this role is to ensure that production procedures are carried out smoothly to maximize efficiency.

In this role, you will perform the following duties:
Set up machines (calibration, cleaning etc.) to start a production cycle.
Control and adjust machine settings, according to the job ticket.
Feed raw material or parts to semi-automated machines.
Inspect parts with precision and measuring tools.
Test operation of machines periodically.
Resolve machine errors and issues that might occur while operating.
Maintain activity logs related to daily secured card production.
 
Basic qualifications for consideration:
High School Diploma or equivalent is preferred but is not required.
Experience in a fast paced, high volume production environment and understanding of production concepts.
Strong mechanical aptitude.
Deep knowledge of production operation.
Experience operating a computer workstation.
Ability to work overtime including Holidays and weekends during peak periods.
Flexibility with working in other areas on occasion.
Strong ability to multi-task.
Ability to work with associates with collaboration related to productivity, safety and quality of work.

Physical Requirements:
Be able, as it is necessary-to climb, stretch, crouch or kneel.
Successful performance requires good vision including close vision for accurate attention to detail.
Work requires incumbent to be mobile and in a standing / walking position.
Ability to lift up to 50 lbs regularly.
Uses hands to handle, finger, or feel objects and to perform keyboarding.
Mon-Fri 2:00pm to 10:00pm
 
Job Number: 2010115133
Job Location: Nashville, TN
Duration: 6 months
Input Date: 06/18/2020
Last Updated: 08/12/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Karen Reno
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003OtTiQAK&URLSource=cjhunter

Manufacturing Specialists / Assemblers (Commercial Camera)

Description:
STS Technical Services is hiring Manufacturing Specialists / Assemblers (Commercial Camera) in Dallas, Texas.

Summary:
The candidate is responsible and accountable for producing quality work to prescribed standards, with a focus on continuous improvement to meet customer commitments on schedule.
Must maintain a safe work environment by adhering to all safety procedures including those that govern the handling of materials, chemicals, tools, and equipment (WHMIS).
Properly use required PPE.
May participate in LEAN Events, “Six S” activities, action teams, etc.
Basic Qualifications:
High School diploma or GED.
1 years of experience. (Entry Level)
Prior Assembly experience a plus.
Able to work in a team environment
Desired Skills:
Basic Computer Skills
The ability to follow verbal and written instructions.
The ability to load and unload calibration chambers.
Mechanical Inclination.
Follow established procedures on routine work.
Flexibility in schedule to work OT.
Essential Duties & Responsibilities:
Performs medium-level assembly functions, which may include Camera Assembly, Focus Camera, Calibrate Camera, and final processing.
Responsibility to include throughput and quality of these operations
Must adhere to ESD practices.
Reads and interprets drawings, Process Flow Instructions and other written or verbal instructions.
Responsible and accountable for producing quality work to prescribed standards, with a focus on continuous improvement to meet customer commitments on schedule, within budget and to SPC standard practices
If required, perform all aspects of inspection: in-process, final and source
Other duties as assigned
About STS Technical Services

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 35104
Job Location: Dallas, TX
Input Date: 07/10/2020
Last Updated: 08/12/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: Frances Berg
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Email: frances.berg@ststechnicaljobs.com
Website: www.stsaviationgroup.com

Manufacturing Support

Description:
PDS Tech, Inc. is seeking a candidate for the Manufacturing Support position located in Fairfield, OH.
This is an apprenticeship position that will prepare you to advance to the Press Operator level.  

Please reach out to Anita Collins at acollins@pdstech.com

What You Will Do:
  • Assist the Press Operator in running the production line.
  • Learn basic press operation. 
  • Pack finished product.
  • Operate finishing equipment.
  • Prepare tooling for production, including die inventory management and basic tooling set up.
  • Perform general housekeeping duties to maintain an orderly environment.

What You Will Get:

  • A position working at a world-class Fortune 100 manufacturer
  • Training in the area of specialty: an opportunity to learn advanced manufacturing methods and techniques.
  • A fair and consistent pay check

Education:

• High school diploma or GED Required 



Experience:

• Prior experience in manufacturing preferred 

• Demonstrated mechanical aptitude via educational or job experience 



Skills:

• Basic computer navigation and data entry skills required 

• Basic to intermediate mechanical skills required 

• Ability to lift up to 50 lbs unassisted 

• Willingness and ability to perform in a fast paced team environment 

 
 
Job Number: 1810082840
Job Location: Fairfield, OH
Duration: 4 months
Input Date: 09/11/2018
Last Updated: 08/12/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Anita Collins
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002e1O3AAI&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Test Technicican

Description:
Description

The manufacturing test technician supports manufacturing in the testing, and failure analysis and resolution, of medium to highly complex electro-optical sensors and assemblies. The candidate would have good knowledge of electrical measurements, and be familiar with using, Meters, Oscilloscopes, Signal Sources, Computers, and other equipment used in the testing of electronic and optical components and modules.
This is a hands-on position that requires a strong ability to work independently, as well as part of a team, to perform electronics testing and analysis of complex electronic assemblies and systems. The candidate must have good hand-eye coordination for work with small tools under a microscope. The ideal candidate will have a solid working knowledge of electronics, and a strong aptitude and interest in working with automated and manual test equipment as well as the communication skills required to work with engineering, management and other technicians. The candidate must be detail oriented and have meticulous record keeping skills.
Communication skills are extremely important as this role includes working with engineering on product introduction as well as training/supporting operators in the group.

Major functions:

Performs set-up, calibration, testing, tuning and troubleshooting of complex electro-optical circuits and components, instruments, mechanical assemblies and test stations. Will require use of a microscope and small tools as well as mechanical hand tools.
• Recognizes failures, and test set up problems, and determines appropriate corrective action.
• Operates a variety
Technical/Functional skills:
• of programmable test equipment (i.e. oscilloscope, function generator, meters, power supplies, etc.)
• Works from written and verbal instructions, test specifications, wiring diagrams and schematics.
• Records and maintains test data and assembly travelers.
• May assist more experienced technicians with more complex test procedures.
• May interface with Engineering to help solve design problems.
• Requires fully proficient job knowledge/skills.
• Preferred 2 years post-Secondary/AAS degree in Electronics or Electro-mechanical Technology with a minimum of 2 years prior related experience, or military equivalent. Minimum requirement, High School Diploma or equivalent, and a minimum of 6 years of prior relevant experience.
• Must have thorough understanding of electronics theory/measurements.
• Ability to work with small hand tools and use microscope.
 
Job Number: 132471
Job Location: Mason, OH
Rate: 26.50
Overtime: Possible
Duration: One Year
Start Date: ASAP
Input Date: 06/22/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Kerry Moreland
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing/Production Operator

Description:
Manufacturing/Production Operator

Job ID # 2020-11448

Contract Opportunity

Location: Scottsdale Arizona

Industry: Aerospace & Defense

Minimum Education: High School Diploma/GED

 

What You’ll Do:

Perform project tasks/assignments of a basic nature ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and sub-assemblies such as modules, boards, panels, drawers, frames, and cables.
Method, technique, and sequence of operations in performing wiring, component installation, hand soldering, and cable harnessing on sub-assemblies and units.
What You’ll Need:

Ability to use hand/torque tools, soldering irons, other light industrial tools
Ability to set up basic equipment and process hardware compliantly to specifications
General knowledge of measuring equipment and math, and sound communication skills
Creative thinking with the ability to multi-task
Commitment to ongoing professional development
Team player who thrives in collaborative environments and revels in team success
 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.



Education & Experience:

High School Diploma or equivalent
 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/
 
Job Number: Job ID # 2020-11448
Job Location: Scottsdale, AZ
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 12 Months
Input Date: 06/24/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Material Handler

Description:
PDS Tech Inc. is seeking a Material Handler, in Fairfield, OH.

Summary:
  • Responsible for providing support involving all aspects of material handling, including picking parts, shipping and receiving goods and storing inventory. 
  • Loads and unloads material within the warehouse and production areas. 
  • Utilizes hand trucks, forklifts, hoists, conveyors, and other handling equipment to move material to and from trucks and within the facility. 
  • Cooperation with all Production team members, Scheduling and Shipping are required. 
  • Note: Time spent on each duty will depend on individual task assignment which can vary daily. 

Education:

• High school diploma or GED required



Required Experience:

• Previous experience working in a warehouse or manufacturing environment

• Prior experience using a forklift

• Demonstrated mechanical aptitude via educational or job experience



Skills:

• Basic computer navigation and data entry skills required

• Basic to intermediate mechanical skills required

• Ability to lift up to 50 lbs unassisted

• Willingness and ability to perform in a fast paced team environment
 
Job Number: 2010113780
Job Location: Fairfield, OH
Duration: 8 months
Input Date: 04/22/2020
Last Updated: 08/12/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Anita Collins
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Email: cecjnrt@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003OnmEQAS&URLSource=cjhunter

Materials & Process Engineer

Description:
We are currently seeking M&P Engineer individuals with a focus in evaluation/processing of composites and adhesive secondary bonding of composites. Also must have ground floor experience and creating methods from scratch.

Seeking a first rate aircraft materials and processes engineer with experience in composite materials, testing, out-of-autoclave processing, as well as bonded assemblies. The engineer in this role will be expected to fully understand and maintain the materials and processes used. The primary task of this role will be to design and carry-out mechanical testing to support structural analysis of both current and future vehicle builds. This will require consultation and buy-in from stakeholders in various departments so strong interpersonal skills are also necessary. The engineer in this role is expected to be knowledgeable of basic mechanical testing methods, and familiar with composite and paste adhesive properties. An additional task of this role will be to review/write manufacturing procedures and processes to ensure compliance with design specifications.

Duties:
• Develop and refine material and process requirements
• Author materials and processing specifications
• Author material/joint test plans and their associated reports
• Review test data and undertake post-testing activities including design allowable calculations, equivalency determinations, and failure mode analysis
• Review test plans, process specifications, and other documents to ensure compliance with design requirements
• Confer with stakeholders in Manufacturing, Engineering, and other departments to facilitate production of parts

Requirements:
• Bachelor’s degree from an ABET accredited institution, with a concentration in a relevant Materials Engineering / Mechanical Engineering / Structural Engineering discipline
• Conversant in composite materials and processes used in the manufacture of composite aircraft fuselage and structural components including out-of-autoclave processing and bonded assemblies
• Experience in authoring / revising materials and process specifications for composite materials
• Experience in authoring test plans and reports
• Knowledgable of materials testing and characterization methods
• Familiarity with industry-accepted statistical analysis methods of treating test data such as those found in CMH17-1
• A desire to work in a fast-paced work environment with a motivated team
• Excellent verbal and written communication skills
• Excellent organizational skills and problem-solving skills
• Strong team player
• Excellent computer skills, Microsoft Word, Excel and PowerPoint
• Experience in stress analysis methods, including the use of hand calcs and FEM is a plus


The Structures Company is an AA/EOE.
 
Job Number: 279
Job Location: Mojave, CA
Rate: **DOE**
Per Diem: Yes
Overtime: Possible
Duration: 9+ Months
Start Date: ASAP
Input Date: 08/12/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

Materials and Processes Engineer

Description:
Chipton-Ross is seeking a Materials and Processes Engineer for an opening in Mojave, CA.

RESPONSIBILITIES:
First rate aircraft materials and processes engineer with experience in composite materials, testing, out-of-autoclave processing, as well as bonded assemblies. The engineer in this role will be expected to fully understand and maintain the materials and processes used in the manufacture of WK2 and SS2. The primary task of this role will be to design and carry-out mechanical testing to support structural analysis of both current and future vehicle builds. This will require consultation and buy-in from stakeholders in various departments so strong interpersonal skills are also necessary. The engineer in this role is expected to be knowledgeable of basic mechanical testing methods, and familiar with composite and paste adhesive properties. An additional task of this role will be to review/write manufacturing procedures and processes to ensure compliance with design specifications.
" Develop and refine material and process requirements
" Author materials and processing specifications
" Author material/joint test plans and their associated reports
" Review test data and undertake post-testing activities including design allowable calculations, equivalency determinations, and failure mode analysis
" Review test plans, process specifications, and other documents to ensure compliance with design requirements
" Confer with stakeholders in Manufacturing, Engineering, and other departments to facilitate production of parts

REQUIRED EXPERIENCE:
" Conversant in composite materials and processes used in the manufacture of composite aircraft fuselage and structural components including out-of-autoclave processing and bonded assemblies
" Experience in authoring / revising materials and process specifications for composite materials
" Experience in authoring test plans and reports
" Knowledgable of materials testing and characterization methods
" Familiarity with industry-accepted statistical analysis methods of treating test data such as those found in CMH17-1
" A desire to work in a fast-paced work environment with a motivated team
" Excellent verbal and written communication skills
" Excellent organizational skills and problem-solving skills
" Strong team player
" Excellent computer skills, Microsoft Word, Excel and PowerPoint
" Experience in stress analysis methods, including the use of hand calcs and FEM is a plus

EDUCATION:
Bachelor's degree from an ABET accredited institution, with a concentration in a relevant Materials Engineering / Mechanical Engineering / Structural Engineering discipline

WORK HOURS:
Full-Time

IND123 JS1

 
Job Number: 179295
Job Location: Mojave, CA
Rate: $70.59 to $78.43 DOE
Duration: 6 Months
Input Date: 06/08/2020
Last Updated: 08/12/2020
Firm Name: CHIPTON ROSS
Attention: Juan Saldarriaga
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: jsaldarriaga@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer ( Goleta, CA ) 10042216J J10021712

Description:
Mechanical Design Engineer ( Goleta, CA ) 10042216J J10021712J

12 + Month Contract

Pay rate: $40 - 75 /hr W2, depending on experience, multiple openings.

1.) 3D modeling CAD experience preferably CREO
2.) Experience in Space Deployables or Mechanisms Highly Desirable
3.) Ability to work independently with minimal supervision.

Experience with Aerospace structures and mechanisms;
Proficiency in CAD software, and design experience with PTC Creo Parametric
Position is part of the Space Component Division, which specializes in deployable systems for spacecraft such as solar arrays, instrument booms, and various extendible support structures. A Structures and Mechanisms Engineer will be responsible for creating and implementing deployable structures and mechanical actuators at the cutting edge of space technology. Will have ownership of work from the concept creation through design phases and may also participate in manufacturing, testing, and integration of systems.

Responsibilities
• Create, prototype, design, and analyze structures and mechanisms for moving mechanical assemblies such as solar arrays, booms, and other support structures and mechanisms for satellite subsystems.
• Develop and refine components and subsystems utilizing design skills, hand calculations, and finite element analysis or other modeling tools as needed.
• Perform detailed 3D designs; generate CAD drawings and related documents, and support manufacturing and assembly of components.
• Spacecraft/aerospace materials experience for metals, adhesives, thermoplastics, etc.
• Ability to regularly work on site in Goleta, CA
• Proficiency with mechanical computer aided design (CAD) software, preferably design and analysis experience with PTC Creo Parametric 2/3.
• Practical understanding of GD&T (ASME Y14.5-2009) • Working knowledge of Microsoft Office suite (Excel, Word, PowerPoint…).
• Working knowledge of applicable manufacturing processes such as machining, finishing, and rapid prototyping.

Qualifications
• Bachelor of Science in Engineering
(Mechanical, Astronautical, or Aerospace)
• 0-3 years of experience in mechanical design

Preferred
• Master's Degree in applicable area.
• Demonstrable problem solving skills with hands-on project experience.
• Candidate has detailed mechanical design knowledge of structures, mechanisms, release and drive actuators, and material selection.
• Experience with FEA analysis, preferably ANSYS or NASTRAN, for structural analysis of designs.
• 8 or more years of direct Mechanical Engineering experience, preferably in the spacecraft or aerospace industry, with significant project ownership.
• Must be self-motivated with excellent technical communication skills.
• Ability to work independently as well as in an integrated team and adapt to change and dynamic requirements.
• Strong communication and analytical skills and discipline with the ability to organize and prioritize job assignments and tasks.
• ITAR Requirements: To conform to U.S. Government space technology export regulations, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.
 
Job Number: 10042216J J10021712
Job Location: Goleta, Ca
Rate: Open
Per Diem: Yes
Overtime: yes
Duration: 12 Months
Start Date: ASAP
Input Date: 06/07/2020
Last Updated: 06/25/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer - Mechanisms

Description:
The Engineer will be designing mechanisms, rotor hubs, actuators, gear boxes, drive systems, etc. All of the design work will revolve around moving parts and mechanisms. This person must also have lead experience and be comfortable in a lead role.

Seeking an experienced design engineer to take ownership of structural analysis of several key components. This role requires the candidate to thrive in a high paced environment and will have an integral role in advancing the next generation of electrically powered vertical lift aircraft.

Roles and Responsibilities:
Define: Generate conceptual layouts for critical systems. This includes rotor blade retention components, mechanical control systems, electro-mechanical actuators, transmissions, and electric motors/shafting. Define key requirements and take ownership of them through the design life-cycle.
Do: The Mechanical Design Engineer will also take the lead designing a myriad of critical components and primary structure. Areas of focus include propeller systems and blade retention components, transmissions, gears, bearings, actuators, motors/shafts, and other critically important, dynamically loaded structural components. The work outputs will include the relevant design artifacts (specifications, interface drawings, layout drawings, datum files and CAD assemblies, tolerance stack-ups, detailed drawings, etc). The ideal candidate will be highly versed in 3D CAD (Dassault 3DExperience preferred) and will also be responsible for conducting sizing of the components he or she develops. This will require working knowledge of aerospace sizing methodologies and experience running finite element models. In addition, the role will require the mechanical design engineer to support development test efforts (both ground and flight testing).
Intrinsic: The role will require constant flexibility and a level of comfort working in a rapid-prototype environment. The projects and assignments will vary from week to week, so the candidate should ideally have robust experiences to draw from (e.g. aerospace development programs, Motorsport/Formula One) in order to operate effectively in this environment. The role will include interfacing with engineering management, our customers, certification authorities, operations, procurement, external suppliers, and fellow design engineers.

Required Qualifications:
• Bachelor’s degree from an accredited university in mechanical/aerospace engineering or a related discipline with at least 5 years of professional experience in aerospace or a related field (i.e. formula one); or master’s degree from an accredited university and at least 3 years of professional experience or equivalent experience/combined education.
• Excellent mechanical aptitude and analytical mindset with a track record of demonstrated success developing actual products in a development environment.
• Highly experienced in 3D CAD and model setup using 3DExperience (preferred), CATIA V5/V6, SolidWorks or similar and generating detailed drawings, which are in accordance with ASME Y14.5-2009 standards.
• Familiar with finite element analytical tools such as Hyper-Mesh pre-processors integrated with Optistruct or Nastran, ANSYS or similar.
• Deep knowledge of common aerospace materials and standard hardware selection is a must. Experience with light weight structures and composites is also highly advantageous.
• Experience designing critical structural components, which have been sized for static strength, stiffness, fatigue, or a combination thereof. Knowledge of kinematics is also desired.
• Experience supporting ground and flight testing of complex systems as well as running sub-scale proof of concept testing such as coupon programs or prototype test rigs.
• Versed in gear and bearing design as well as lubrication systems, and the design of common housing features such as lugs and bolted joints.
• Familiarity with component and sub-system FAA certification testing is a plus.
• Past experience as a design supervisor, or leading a team and/or mentoring others, formally or informally is an advantage.



The Structures Company is an AA/EOE.
 
Job Number: 400
Job Location: Southern, CA
Rate: $55-$70/Hr., **DOE**
Per Diem: Yes
Duration: 6+ Months
Start Date: ASAP
Input Date: 06/12/2020
Last Updated: 07/15/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Mechanical Designer

Description:
Automation, robotics, and Inventor
 
Job Location: Pittsburgh, PA
Input Date: 07/01/2019
Firm Name: BELCAN TECHSERVICES
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Email: bcampbell@belcan.com
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer -NX

Description:
Mechanical Engineer

Summary of Job Description:

The Mechanical Engineer will be working under the direction of the Sr Project Engineer, the Mechanical Design Engineer will create 3-D CAD models and assemblies in support of proper design at the component or subsystem level. The Mechanical Design Engineer will also work collaboratively with other engineers and designers the design and development of vehicle transportation systems for Military applications.

Job Requirements:

New Product Design Experience
Experience with design of vehicle suspension systems
Experience with steering axles and Trunnion Suspension experience are a bonus
Siemens NX Solid Modeling experience
Ansys Mechanical APDL(structural analysis)
Experience developing vehicle transport systems a plus
BOM generation
Familiar in product development utilizing weldments fabrication, sheet metal fabrication and Bolted Joints
Job Requirements:

Positions is based in Florence KY
 
Job Number: 8678
Job Location: Florence, KY
Start Date: asap
Input Date: 06/24/2020
Firm Name: TRIMECH SERVICES LLC
Attention: Kathy Beattie
Address: 4461 COX RD STE 302
City, State: GLEN ALLEN, VA 23060
Phone: 804/257-9965
Fax Phone: 804/257-7945
Website: www.trimechservices.com

Mechanical Engineers

Description:
3D CAD, FEA a plus
 
Job Location: Midwest
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: annmarie@advancedtechno.com
Website: www.advancedtechno.com

Mechanical Engineers

Description:
3D CAD, FEA a plus
 
Job Location: Southeast
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: annmarie@advancedtechno.com
Website: www.advancedtechno.com

Mechanical Engineers

Description:
With sustaining experience
 
Job Location: Midwest
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: annmarie@advancedtechno.com
Website: www.advancedtechno.com

Mechanical Engineers BSME -- Pro/E

Description:
2000 hours Pro/E
 
Job Location: CT/IN/FL/OR
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: davellino@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Manufacturing Engineer

Description:
Job Description:
1. This position will be responsible for determining mechanical manufacturing methods for hardware and ensuring that the processes are available.
2. Candidate will create manufacturing assembly documentation, concepts tools, provides technical assistance, in order to assemble high quality, high engineered hardware for us in space applications.
3. Candidate must ensure processes and procedures comply with all applicable Environmental, Health and Safety requirements as well as all the applicable quality requirements.
4. Must be able to perform cost estimates, work to schedules, and write procedures and policies.
5. Must be able to review drawings and concepts and resolve producibility concerns.
6. Candidate must provide technical support to the manufacturing facility as well as to the external suppliers.
7. Will support failure investigations, determine root cause of failure, and implement corrective actions and disposition of non-conforming hardware, all in support of continuous improvement initiatives.
8. Must be able work well in an integrated product development/ design environment.
9. Candidate will present to senior management on various topics, be involved with, and implement additional initiatives such as ACE, Process Certification, Manufacturing Process Reviews, Lean Manufacturing and EH&S projects.
10. Candidate must possess a positive attitude and be able communicate well with staff, IPD teams & management.
11. The job involves working on the manufacture of complex mechanical systems, manufacturing of components such as, heat exchangers, pumps, fans, pressurized accumulators and other hardware related with life support systems.
12. Experience in one or more of these fields is required.

Education/Certifications:
1. Bachelor’s Degree of Science in Engineering or Technology.
2. MBA or an advanced Engineering degree is desired.

Experience/Qualifications:
1. Candidate must have 10+ years of experience working on the manufacture of complex mechanical systems (less experience will be considered).
2. Desired experience must include working on the manufacturing of components such as, heat exchangers, pumps, fans, & pressurized accumulators.
3. Candidate must have working knowledge of Microsoft Windows environment and experience in using any type of publishing software.
4. Familiarity with a modeling and/or design package such as ProE, Creo, NX, Catia, SolidWorks (Creo Parametric is desired).
5. Knowledge of Lean Manufacturing, machining concepts, additive manufacturing and special processing, such as welding and brazing, is highly desirable.
6. Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable.
7. Experience with an MRP (Manufacturing Resource Planning) system is desirable.
8. US Citizen is required.
 
Job Number: 12231
Job Location: Windsor Locks, CT
Rate: $48.50/HR
Per Diem: No
Overtime: Possible
Duration: 12 mos
Start Date: ASAP
Input Date: 06/26/2020
Last Updated: 07/01/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Mechanical Systems Design & Analysis Engineers -- Multiple Locations

Description:
Please call for details

Take your career to the next level with the help of our staffing specialists - Contact us today!

-Nationwide Opportunities
-Competitive Compensation
-Great Benefits
-Referral Bonus
 
Job Location: Nationwide
Input Date: 06/24/2019
Firm Name: ICONMA LLC
Address: 4620 E 53RD ST
City, State: DAVENPORT, IA 52807
Phone: 312/502-4795
Email: constance@iconma.com
Website: www.iconma.com

Mechanical Systems Design Engineer

Description:
Aircraft Engineering & Design--

10+ years of engineering experience with supporting aviation systems; perform layouts and stack ups; have worked in all or most of the following activities:
-System Engineering
-Architecture
-Design
-Integration
-Test or requirements activities
Preferable multi-system knowledge - ECS, hydraulics, mechanics, pilot/flight controls, and propulsion; NX experience preferred

U.S. Citizen or Permanent Residency Required

Paid Holidays
United Healthcare Medical Insurance
Dental
Vision
Direct Deposit
 
Job Number: 53934
Job Location: California
Input Date: 07/02/2018
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Bernard Barrera
Address: 2500 REDHILL AVE STE 200
City, State: SANTA ANA, CA 92705
Phone: 949/432-7512
Email: bbarrera@butler.com
Website: www.butler.com

Mechanical Test Engineer

Description:
Job Description:
1. Design, implement, and maintain test processes for Space Systems hardware using lean philosophies and techniques.
2. Take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing.
3. This can involve testing, data analysis, and interface with all aspects of the engineering department.
4. Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program.
5. Responsibilities also include daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met.

Typical Duties:
1. Support laboratory testing of Space Station hardware.
2. Develop and validate tooling concepts.
3. Author and maintain operation/test procedures.
4. Preparation of standardized operation/test sheets.
5. Defining test rig and facility requirements.
6. Participation on program Integrated Product Development teams.
7. Review drawings and concepts and resolve producibility concerns.
8. Experience with advanced instrumentation and data acquisition systems is required.
9. Knowledge of LabVIEW desired.
10. Experience should also include five years working on the testing of complex mechanical systems, testing of complex mechanical systems, testing of components such as, heat exchangers, pumps, fans, & accumulators.
11. Applicant must have the capability of working independently and be self-motivated.
12. Excellent communication skills, written and verbal are required.
13. Ability to proficiently operate common Microsoft Office software products is required.

Education:
1. Bachelor’s degree required.
 
Job Number: 12454
Job Location: Windsor Locks, CT
Rate: $67.00/HR
Per Diem: No
Overtime: Possible
Duration: 12 Mos
Start Date: ASAP
Input Date: 07/22/2020
Last Updated: 08/11/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Mechanical Test Engineer

Description:
PDS Tech is seeking a Mechanical Test Engineer in Windsor Locks, CT
 
The ideal candidate will Design, Implement, and Maintain Test Processes for Space Systems hardware using lean philosophies and techniques.
 
They will take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing.
 
This can involve testing, data analysis, and interfacing with all aspects of the engineering department.
 
Duties / Responsibilities include:
  • Interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program.
  • Daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met.
  • Supporting laboratory testing of Space Station hardware,
  • Developing and validating tooling concepts,
  • Authoring and maintaining operation/test procedures,
  • Preparing standardized operation/test sheets,
  • Defining Test Rig and Facility requirements,
  • Participating in Program Integrated Product Development teams,
  • Reviewing drawings and concepts, and
  • Resolving Producibility concerns.


 
Requirements:
  • Experience with advanced instrumentation and data acquisition systems
  • A minimum of five (5) years working on the testing of complex mechanical systems and components such as, heat exchangers, pumps, fans, & accumulators.
  • Capability of working independently and be self-motivated.
  • Excellent communication skills, written and verbal
  • Ability to proficiently operate common Microsoft Office software products

Desired Skills:

  • Knowledge of LabVIEW


  • Will accept someone with 2+ years experience up to and including 25+ years experience.

Education:

  • Bachelors

 
Job Number: 2010112064
Job Location: Windsor Locks, CT
Duration: 12 months
Input Date: 02/17/2020
Last Updated: 08/12/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Roger Greco
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fl9JQAQ&URLSource=cjhunter

Mechanical or Manufacturing Engineers

Description:
Project management or overhaul experience
 
Job Location: West
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: annmarie@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NX CAD Speclalist

Description:
NX CAD specialist to release models for a transportation company developing an electromagnetically levitated pod through a low pressure tube.
NX is a must.
Experience in completing mechanical layout and 3D routing for fluid lines and associated clamps and brackets is the primary need. Prior experience designing and procuring brackets and mounting features a plus.
 
Job Number: 2010115757
Job Location: Los Angeles, CA
Per Diem: split
Overtime: possible
Duration: 6 mos
Start Date: asap
Input Date: 06/26/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Anna Ashcraft
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NX CAD Speclalist

Description:
NX CAD specialist to release models for a transportation company developing an electromagnetically levitated pod through a low pressure tube.
NX is a must.
Experience in completing mechanical layout and 3D routing for fluid lines and associated clamps and brackets is the primary need. Prior experience designing and procuring brackets and mounting features a plus.
 
Job Number: 2010115757
Job Location: Los Angeles, CA
Per Diem: split
Overtime: possible
Duration: 6 mos
Start Date: asap
Input Date: 06/26/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Anna Ashcraft
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Website: www.pdstech.com

Power Supply Project Manager

Description:

Job Duties:   



  • The Project Manager is responsible for leading all aspects of the project activities for the projects assigned in accordance with project goals, budget, quality control and company objectives
  • Project Manager is responsible for providing project planning and management for established initiatives within a company. He/she will ensure that  projects are completed to specification, within an established time frame and budget
  • Tasked with managing projects with top-down oversight from inception to completion. 
  • Project management of  power electronics component development
  • Ensures accurate and timely project documentation, including but not limited to, RFI's submittals, schedule updates, time records, supplemental work orders, change order pricing, and general project correspondence
  • Prepare Project expense budgets, revenue and profit projections for the Division Manager.
  • Enforce compliance with all applicable laws, regulations, safety standards and contracts and report all variances to the Division Manager.


Minimum required qualifications:

  • Must be US Citizen
  • B.S or MS in Technical field from Accredited University (preferably Electrical or Mechanical)
  • minimum 5+ years of Technical project Management exp preferably withing the aerospace and Military space
  • Excellent written and verbal communication and team skills.
  • Must be PMP or MBA.
  • Ability to independently manage the operational aspects of ongoing projects and serves as liaison between project management and project team
  • Milestone development and tracking
  • Management of detailed components’ project plan  timelines
  • Tracking of component sourcing and component status
  • Experience creating and implementing new project/program management processes
  • Experience in business process mapping or operational redesign / improvement
  • Experience working with quality management approaches, techniques, and principles to ensure quality
  • Strong cross-functional collaboration skills, relationship building skills and ability to achieve results without direct reporting relationships


 
Job Number: 2010113697
Job Location: Sun Valley, CA
Duration: 12 months
Input Date: 04/14/2020
Last Updated: 08/12/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Anna Ashcraft
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003OnMgQAK&URLSource=cjhunter

Power and Electrical Engineer

Description:
The position includes both avionics systems tasks and hands-on electrical design, development, and test tasks.

The scope of the electrical design engineering position includes:
  • Flight avionics hardware
  • Signal conditioning
  • Data acquisition
  • Actuator control
  • RF communication
  • Wire harness elements
  • Flight software, including hardware interface
  • Ground support electronics hardware
  • Integrated vehicle health monitoring


Duties & Responsibilities:

  • Develop subsystem requirements
  • Decompose subsystems requirements to electrical hardware and software requirements
  • Capture electrical hardware requirements from system specifications, design standards, safety analysis, and other sources
  • Document derived requirements from the design process and design artifacts.
  • Validate the derived requirements
  • Trace the hardware requirements to their parent requirements, to their implementation in the electronic hardware, and to their verification results
  • Generation of requirement compliance matrix, analysis and status reports
  • Generation of the justification and description in support of the airworthiness case for the electrical hardware
  • Develop the life-cycle scope of electrical subsystems including design, debugging, test, deployment and performance analysis.
  • Document designs with engineering drawings and written descriptions.
  • Write fabrication and test procedures.
  • Present at and participate in design reviews.


Professional Requirements:

  • Avionics engineering experience on aircraft and/or spacecraft projects
  • Hands-on electrical / electro-mechanical design experience
  • Must have the ability to layout power & electromechanical systems
  • Skill applying C++ and embedded software programming to avionics
  • Experience with DO-178 and DO-254 is a plus
  • Must understand the systems engineering process
  • Must be a “U.S. person” as defined by the ITAR (22 CFR §120.15)


 
Job Number: 2010115014
Job Location: Mojave, CA
Duration: 36 months
Input Date: 06/03/2020
Last Updated: 08/12/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003Ot7FQAS&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Engineer ( Goleta, CA ) 9920750

Description:
Principal Engineer ( Goleta, CA ) 9920750
12 Month Contract

Pay rate: $60-80/hr , depending on experience

**Qualifications:
- Design, analysis and integration experience of spacecraft thermal systems.
- Experience using thermal analysis tools (Thermal Desktop, SINDA/G, SINDA/FLUENT, TSS).
- Experience using aerospace standard design tools (CREO, NX, CATIA).
- Masters Degree in Mechanical or Aerospace Engineering.
- Experience with space vehicle thermal design and/or integration.
- Detail-oriented and have excellent verbal and written communications skills, leadership skills, and organization skills
- Experience working on thermal design and troubleshooting efforts.
 
Job Number: 9920750
Job Location: Goleta, CA
Rate: Open
Per Diem: Yes
Duration: 12 Month
Start Date: ASAP
Input Date: 06/07/2020
Last Updated: 06/25/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

Principal Final Assembly Inspector

Description:
 PDS is seeking a Principal Final Assembly Inspector, in Saint Augustine, FL.

Summary:

  • Inspects mechanical final assembly installations of the aircraft such as fuselage, wings, flaps, landing gears, and tail assemblies.
  • Inspects systems such as hydraulic, pneumatic, oil, heat, and brakes.
  • Visually and physically inspects electrical installations.
  • Rechecks work after adjustment or repair.
  • May monitor and verify quality in accordance with statistical process or other control procedures.
  • Maintains necessary inspection logs and writes inspection reports.


 
Qualifications:
Basic Qualifications: 
  • High School diploma or equivalent and 4 years additional education and/or related experience.


 
 
Job Number: 2010115293
Job Location: Saint Augustine, FL
Per Diem: No
Duration: 0 months
Input Date: 06/03/2020
Last Updated: 08/12/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Jordan Smith
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: cecjdallasav@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003Ou1uQAC&URLSource=cjhunter

Pro/E Creo Designers

Description:
Mechanical or electrical design experience

Immediate needs - email a resume and call our national recruiters
 
Job Location: Nationwide
Input Date: 06/12/2018
Firm Name: ADDITIONAL CONTRACT SERVICES
Address: 85 RANGEWAY RD BLDG 1 STE 2
City, State: NORTH BILLERICA, MA 01862
800 Phone: 800/661-8272
Email: acs@acsnatl.com
Website: www.acsnatl.com

Product Repair/Mod Tech C

Description:
Chipton-Ross is seeking a Product Repair/Mod Tech C for an opportunity in New Orleans, LA.

RESPONSIBILITIES:
Assembles, disassembles and/or modifies systems by changing, removing, replacing or upgrading aerospace vehicle components to correct failures or implement changes. Oversees assembly, disassembly or overhaul. Configures aerospace vehicles and bench test equipment. Troubleshoots complex pneumatic, hydraulic and electrical systems to isolate mechanical or electrical faults and repair faulty components. Performs validation/verification testing of systems and components. Documents procedures and established processes to ensure contractual and regulatory compliance (e.g., repairs, test results, applicable modifications and inspection results). Inspects components and verifies repairs for flight worthiness requirements. Oversees training. Works under general direction.

EDUCATION:
Accredited Education/experience typically acquired through basic education (e.g. High School diploma/GED) and typically 4 or more years' related work experience or an equivalent combination of education and experience (e.g. vocational school/Associate+2 years' related work, Bachelor, etc.).

WORK HOURS: 6:00AM-2:30PM
Full-Time/First Shift

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

MISCELLANEOUS:
This work assignment has been designated as "safety-sensitive" by the Client. Contractors assigned to safety-sensitive jobs at the Client site must first complete regulatory pre-placement requirements prior to reporting to assignment. Additionally, contractors assigned to safety-sensitive work will be subject to random drug and alcohol testing in accordance with federal mandates.

 
Job Number: 186218
Job Location: New Orleans, LA
Rate: $DOE
Duration: 4 Months
Input Date: 06/17/2020
Last Updated: 08/12/2020
Firm Name: CHIPTON ROSS
Attention: Andrew Craft
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: acraft@chiptonross.com
Website: www.chiptonross.com

Product Repair/Mod Tech C

Description:
Chipton-Ross is seeking 8 Product Repair/Mod Technician C located at Mountain Home AFB, ID

RESPONSIBILITIES:
Assembles, disassembles and/or modifies systems by changing, removing, replacing or upgrading aerospace vehicle components to correct failures or implement changes. Oversees assembly, disassembly or overhaul. Configures aerospace vehicles and bench test equipment. Troubleshoots complex pneumatic, hydraulic and electrical systems to isolate mechanical or electrical faults and repair faulty components. Performs validation/verification testing of systems and components. Documents procedures and established processes to ensure contractual and regulatory compliance (e.g., repairs, test results, applicable modifications and inspection results). Inspects components and verifies repairs for flight worthiness requirements. Oversees training. Works under general direction. Assembles, disassembles and/or modifies systems by changing, removing, replacing or upgrading aerospace vehicle components to correct failures or implement changes. Inspects component before installation or usage to verify cleanliness and serviceability of components. Fabricates and modifies aerospace products according to specifications. Performs tasks associated with the safe handling of an aerospace vehicle. Documents procedures and established processes to ensure contractual and regulatory compliance (e.g., repairs, test results, applicable modifications and inspection results).
Demonstrates the capability to read and interpret engineering drawings, technical orders, process specification, and retrofit requirements to perform
Proficient in wire routing and termination on a variety of connectors.

PREFERRED EXPERIENCE:
F-15 experienced preferred.

EDUCATION:
Education/experience typically acquired through basic education (e.g. High School diploma/Accredited GED) and typically 4 or more years' related work experience or an equivalent combination of education and experience (e.g. vocational school/Associate+2 years' related work, Bachelor, etc.).

FULL TIME/FIRST SHIFT
WORK HOURS: 6:00 AM - 2:30 PM

ADDITIONAL REQUIREMENTS:
Individuals must possess their own personal standard tools and possess personal safety shoes compliant with ANSI standards.

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 184323
Job Location: Mountain Home AFB, ID
Rate: $DOE
Duration: 12 Months
Input Date: 01/24/2020
Last Updated: 08/12/2020
Firm Name: CHIPTON ROSS
Attention: Johnnie Barrientos
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: jbarrientos@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Repair/Mod Tec

Description:
Product Repair/Mod Tec

Job ID # 2020-11443

Contract Opportunity

Location: New Orleans, LA

Industry: Aerospace & Defense

Clearance Requirement: Secret Clearance

Minimum Education: High School Diploma

Minimum Experience: 4 Years

 

What You’ll Do:

Assemble, disassemble and/or modify systems by changing, removing, replacing or upgrading aerospace vehicle components to correct failures or implement changes.
Oversee assembly, disassembly or overhaul.
Configure aerospace vehicles and bench test equipment.
Troubleshoot complex pneumatic, hydraulic and electrical systems to isolate mechanical or electrical faults and repair faulty components.
Perform validation/verification testing of systems and components.
Document procedures and established processes to ensure contractual and regulatory compliance (e.g., repairs, test results, applicable modifications and inspection results).
Inspect components and verifies repairs for flight worthiness requirements.
Oversee training.
Work under general direction.
What You’ll Need:

Secret Clearance
 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.



Education & Experience:

High School Diploma combined with 4 + years of relevant work experience; or an equivalent combination of education and experience.
 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

 
 
Job Number: Job ID # 2020-11443
Job Location: New Orleans, LA
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 4 Months
Input Date: 06/23/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Repair/Mod Tech

Description:
Product Repair/Mod Tech

Job ID # 2020-11457

Contract Opportunity

Location: New Orleans, LA

Industry: Aerospace & Defense

Clearance Requirement: Secret Clearance

Minimum Education: High School Diploma

Minimum Experience: 4 Years

 

What You’ll Do:

Assemble, disassemble and/or modify systems by changing, removing, replacing or upgrading aerospace vehicle components to correct failures or implement changes.
Oversee assembly, disassembly or overhaul.
Configure aerospace vehicles and bench test equipment.
Troubleshoot complex pneumatic, hydraulic and electrical systems to isolate mechanical or electrical faults and repair faulty components.
Perform validation/verification testing of systems and components.
Documents procedures and established processes to ensure contractual and regulatory compliance (e.g., repairs, test results, applicable modifications and inspection results).
Inspect components and verifies repairs for flight worthiness requirements.
Oversee training.
Work under general direction.
What You’ll Need:

Secret Clearance
 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.



Education & Experience:

High School Diploma/GED combined with 4 + Years of experience; or an equivalent combination of education and experience.
 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

 
 
Job Number: Job ID # 2020-11457
Job Location: New Orleans, LA
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 3 Months
Input Date: 06/25/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Product Support Engineer

Description:
• Applies the Autodesk Inventor 3D CAD system to create mechanical layouts and drawings.
• Modifies mechanical and electromechanical assemblies using design for manufacturing (DFM), design for assembly (DFA) principles.
• Develops detailed fabrication and assembly drawings, performs tolerances analysis, design studies and trade studies.
• Specifies mechanical standards and best practices.
• Troubleshoots and resolves mechanical manufacturing and assembly issues.
• Support testing, installation, operation, maintenance and repair of electromechanical equipment.
• Generates project cost estimates and maintains project budgets and schedule.
• Generates engineering design change orders • Generates engineering Bills of Materials (BOMs) • Uses established and well defined engineering procedures.
• Able to work simultaneously on a variety of projects.

• In pursuit of a Bachelor of Science degree in Mechanical Engineering or Mechanical Engineering Technology • 0-3 years of experience in mechanical engineering design of electromechanical equipment and systems.
• Practical experience with computer aided design and analysis software tools.
• Good communication skills
• Completed statics/dynamics, vibration and fluid dynamics course work.
 
Job Number: B4111
Job Location: Northwest, MA
Rate: $29-$40
Per Diem: Possible
Overtime: Possible
Duration: 6+ months
Start Date: 6/22/2020
Input Date: 06/17/2020
Last Updated: 08/12/2020
Firm Name: ADVANCED TECHNOLOGY
Attention: Brittany
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: brao@advancedtechno.com
Website: www.advancedtechno.com

Production Engineer

Description:
Job Description:
  • Production Engineering (PE) is the leader in Production System design and oversight. Engineering, manufacturing, testing, and supply teams are just a few of the job roles where PE is ubiquitous in the lifecycle of an aircraft. BDS Production Engineering includes subdisciplines of Equipment & Tool Engineering (E&TE), Industrial Engineering (IE), Manufacturing Engineering (ME), and Production Review Engineering (PRE). Our team establishes the baseline build plan, provides and supports the tooling required to accomplish that build, and resolves all build conflicts that occur when building something as complex as an aircraft.

Required:
  • Mechanical Engineering, Aerospace Engineering, Industrial Engineering, Manufacturing Engineering degrees (and other ABET degrees)
  • Experience:  Lean build, delivery, post-production, modification, and recovery processes.  Experience with designing products such as: architecture for build, critical path analysis, supply chain analysis, product review and disposition, supplier MRB authorization and surveillance, build to, buy to, support to packages, work instructions/NC programs, tooling design, build and support plans, design and production validations, and spares, retrofit, repairs, and modification instructions.
  • Tools/Language/Specific Skills: Lean, IVT, CREO, UG, CATIA, MES, Gold, PrimeR, Aurora, 3DCS, VisVSA, DELMIA, VisMockup, ProModel, FlexSim, 3D Printed Parts, Moonshine Shop, Maker Space, ImDev, ICIDO, Multi-Monitor Collaborative Rooms

 
Job Number: 2010110792
Job Location: Saint Louis, MO
Duration: 12 months
Input Date: 04/01/2020
Last Updated: 08/12/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Christine Siu
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002ffBTQAY&URLSource=cjhunter

Project Engineer

Description:
This position is responsible to conduct and perform engineering research and development work on assigned projects, either individually or as a team participant.  This is an exempt position that may require in excess of a 40-hour week in order to effectively carry out the listed job duties.  Occasional travel required.
ESSENTIAL DUTIES:
Responsible to lead new projects with support from engineers, design engineers and technicians, with minimal supervision. 
Analyzes and interprets engineering concepts and specifications for development projects.  Plans and organizes research procedures. 
Responsible for the application of sound and accepted engineering principles, extent and adequacy of exploratory research and techniques, and the basic designs, construction and testing of pilot models.  Work is subject to regular review and minimal supervision.
Offers technical advice and assistance to engineers, designers and technicians assigned to the projects.  Works with design group and Project Manager to modify designs as needed.  Works with Operations Department and Technical Services in troubleshooting problems.
Maintains records related to materials specifications, research procedures, development techniques, designs, product performance, test data, time, etc. 
Keeps well informed of new developments in engineering blown film technology and/or compressor industry.  Continually develops process knowledge.  Occasionally visits customer sites.
Maintains thorough knowledge of applicable industry, national, and international standards, regulations and laws regarding safety and standard design practices.
Responsible for reports to management as required.
Assists sales, customer service and manufacturing departments in technical matters when needed; periodic travel as required.
Seeks, evaluates and conducts negotiations with vendors regarding machinery components and integrated equipment.
QUALIFICATIONS REQUIRED
A Bachelor’s Degree in mechanical or electrical engineering, and six years of experience in the engineer-to-order machinery industry (i.e. converting, printing, plastics, packaging machinery manufacturing) or compressor industry.

Qualified individual will have mechanical or electrical engineering expertise, knowledge of parts numbering systems, bill of materials, and engineering revision systems.  Must be proficient with integrated business systems, design for manufacturing, and engineering design standards.  Must communicate well with external customers and internal customers/co-workers.  Must have ability to lead projects from concept through commercialization.

Essential to the position are ingenuity, communication, and follow through.
 
 
Job Number: 2010113272
Job Location: Appleton, WI
Duration: 6 months
Input Date: 03/17/2020
Last Updated: 08/12/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Tyler Belisle
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fqnZQAQ&URLSource=cjhunter

Project Engineering Specialist 3

Description:
Chipton-Ross is seeking a Project Engineering Specialist 3 for an opportunity in Hood River, OR.

RESPONSIBILITIES:
Seeking a Project Engineering Specialist to support the Vision Systems Team on multiple development projects.
Establishes design concepts, criteria and coordinates multidiscipline engineering efforts, including development, integration and test, for ongoing or routine projects.
Performs engineering planning, integration, verification and validation and evaluates alternatives including cost and risk, supportability and analyses.
Develops and administers work breakdown structure (WBS) of projects.
Creates milestones and monitors adherence to master plans and schedules; identifies project issues and proposes solutions, such as allocation of resources or changing contractual specifications.
Monitors performance metrics.
Prepares and presents outcomes, assessments and corrective action initiatives.
Identifies corrective actions to improve project or team performance.
Coordinates activities of project personnel.
Submits project deliverables.

REQUIRED EXPERIENCE:
Knowledge of the Earned Value Management System (EVMS) and its application.

Exercises engineering judgment in developing appropriate decisions considering decision criteria, implications, and possible consequences, to ensure product design integrity.

Demonstrates understanding of the applicable scientific and engineering knowledge and involves others in obtaining information for the engineering decision-making process.

Knowledge of various engineering disciplines such as electrical, mechanical, and systems. The ability to communicate with technical personnel from multiple skill areas and functions to evaluate technical information and issues impacting design, production, and support of products, services, or other deliverables.

Manages budgetary and/or financial processes to ensure appropriate fiscal performance.
Knowledge of Project Management theory, concepts and principles (e.g., theory of constraints, critical path methodology, project risk management, triple constraints, project scope management, project management lifecycle etc.).

Knowledge of project planning principles and techniques to achieve desired outcomes on budget and on plan. Ability to define, design and plan projects, achieve project deliverables, and optimize the contributions of internal and external resources.

Ability to create project schedules to identify overall timeframe for project activities to meet the defined project objectives (to include major milestones), identify resource requirements for projects, and manage those resources throughout the project life cycle.


EDUCATION:
Accredited Technical bachelor's degree and 5 or more years related work experience or an Accredited Master's degree with 3 or more years. A technical degree is defined as any four year degree, or greater, in mathematics, sciences or technologies.

9/80 WORK WEEK
 
Job Number: 186105
Job Location: Hood River, OR
Rate: Up to $50.00 DOE
Duration: 6-12 Months
Input Date: 06/10/2020
Last Updated: 08/12/2020
Firm Name: CHIPTON ROSS
Attention: Kevin Suk
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: ksuk@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Assurance Engineer

Description:
Quality Assurance Engineer

Job ID # 2020-11464

Contract Opportunity

Location: Marion, MA

Industry: Aerospace & Defense

Clearance Requirement: Ability to Obtain Secret Clearance

Minimum Education: High School Diploma

 

What You’ll Do:

Research, plan, design and develop mechanical products and systems such as instruments, controls, robots, engines, machines and mechanical, thermal hydraulic or heat transfer systems for production, transmission, measurement, and use of energy.
Apply research to the planning, design, development, and testing of mechanical and/or electromechanical systems, instruments, controls, engines, and/or machines.
Develop, modify, and apply control systems and protocols for processing materials into partially finished or finished products.
Collaborate with quality, engineering, planning and manufacturing organization's to ensure quality standards are in place.
Develop, and implement/or improve current methods and procedures for producing and inspecting precision and accuracy of products and production equipment
Design and analyze inspection and testing processes, mechanisms and equipment; conducts quality assurance tests; and performs statistical analysis to assess the cost of and determine the responsibility for, products or materials that do not meet required standards and specifications.
Audit quality systems for deficiency identification and correction.
Ensure that corrective measures meet acceptable reliability standards and that documentation is compliant with requirements.
May specialize in the areas of design, incoming material, product evaluation and reliability, and/or research and development as they apply to product or process quality.
May be certified in lean and six-sigma quality engineering methodologies.
Analyze inspection and testing processes, mechanisms and equipment; conducts quality assurance tests; and performs statistical analysis to assess the cost of and determine the responsibility for, products or materials that do not meet required standards and specifications.
Audit quality systems for deficiency identification and correction.
Ensure that corrective measures meet acceptable reliability standards and that documentation is compliant with requirements.
What You’ll Need:

Circuit Card Assembly experience is a plus
Candidates with circuit card assembly and Surface Mount Technology experience preferred.
Candidates with electronics experience in manufacturing a plus.
Ideally local or commutable candidates preferred.
DoD industry experience a plus
BA Degree in not Required HOWEVER STEM Related Degree is HIGHLY PREFERRED.
 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.



Education & Experience:

High School Diploma
 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

 
 
Job Number: Job ID # 2020-11464
Job Location: Marion, MA
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 12 Months
Input Date: 06/29/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Engineer (Aerospace - Bingen, WA next Hood River, OR)

Description:
Sr Quality Engineering Specialist - Bingen, WA

Job Description:
• Review technical drawings, work instructions, and engineering specifications for manufacturability, inspectability, and assembly.
• Control the quality of materials, products and services supplied to Insitu based on product specifications and design.
• Investigate part issues and perform root cause analysis and resolve product issues using closed loop corrective actions.
• Provide education and coaching to other Insitu departments on quality systems, regulatory compliance and quality initiatives to develop and improve performance and productivity.
• Design and analyze product inspection and testing processes, mechanisms and equipment.
• Provide technical solutions for a wide range of problems through imaginative, thorough, and practical results.
Skills & Abilities Required
• Ability to understand and interpret technical drawings and engineering specifications.
• Proven ability to assess manufacturing processes and make recommendations for improvements to ensure delivery of quality products.
• Proven ability to solve a wide range of difficult problems using root cause/corrective and preventive action standard practice.
• Experience working with ISO quality standards and other Aerospace standards (AS9100, AS9102, AS9103).
• Knowledge of various engineering disciplines such as electrical, mechanical, and systems. The ability to communicate with technical personnel from multiple skill areas and functions to evaluate technical information and issues impacting design, production, and support of products, services, or other deliverables.
• Ability to analyze problems (troubleshooting, fault isolation, repair, modification, or redesign) of assigned end items to support the design, development and modification of company products using knowledge of engineering disciplines (ME, EE, etc.).

Strongly Desired
• Knowledge of manufacturing processes, materials science, and prototyping techniques
• Knowledge of design and drafting methods including geometric dimensioning & tolerance
• Knowledge of engineering tests techniques, methods, equipment and instrumentation

Desired
• Knowledge of IPC standards (IPC-A-610, Acceptability of Electronic Assemblies, IPC/WHMA-A-620B Requirements and Acceptance for Cable and Wire Harness Assemblies)
• Knowledge of digital circuit design parameters (e.g., throughput, rise time, clock frequencies, propagation delay) and hardware description languages (e.g., Hardware Description Language [HDL], Verilog).Knowledge of computer hardware and software components (e.g., processors, memory, interfaces, high order languages), and characteristics (e.g., throughput, processing architecture, timing, capacity).
• Knowledge of Electromagnetic Interference (EMI) and Electromagnetic Compatibility (EMC) considerations with respect to electrical/electronic design (e.g., wire harness design, grounding and shielding design techniques, lightning protection).
• Six Sigma Certification
• Certified Quality Engineer (CQE)
Education & Experience
Technical bachelor’s degree and 5 or more years related work experience or a Master’s degree with 3 or more years. A technical degree is defined as any four year degree, or greater, in mathematics, sciences or technologies.


HOW TO APPLY:
1. REQUIRED: Email resume in MS Word Doc Format: albert.peniche@yoh.com


ALBERT PENICHE
Sr. Technical Recruiter, Engineering/Aviation Division
YOH AVIATION, A DAY & ZIMMERMANN COMPANY
D 314-791-1565
albert.peniche@yoh.com
 
Job Number: AP001
Job Location: Bingen, Washington State
Rate: OPEN
Per Diem: No
Overtime: Yes
Duration: Long Term
Start Date: ASAP
Input Date: 06/25/2020
Firm Name: YOH SERVICES
Attention: Albert Peniche
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/791-1565
800 Phone: 800/298-0666
Website: jobs.yoh.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Engineer II ( Linthicum MD ) 10167058 - Top Secret

Description:
Quality Engineer II ( Linthicum MD ) 10167058 - Top Secret Required
10 Month Contract

Pay rate: Open

!!!! MUST HAVE AN ACTIVE TS CLEARANCE !!!!
On a national security space program (TS-clearance is required!):
1. Perform in-process and final inspections in the Integration and Test work center, and perform data package reviews when needed.
2. Generate and review nonconformance reports for accuracy and detail
3. Participate in PMRB activities and provide input relative to disposition of materials.
4. Assist in developing Root Cause / Corrective Action plans through detailed analysis of nonconformance reports
5. Perform configuration audits to reconcile as-built vs as-designed. Ensure constraints or discrepancies are identified and driven to closure prior to tollgate / milestone activities.
6. Attend readiness reviews as the product assurance lead and provide inputs as required

Prerequisites:
1. Active TS clearance
2. College degree from accredited 4-year institution or 2-year associates degree with plan for completing 4-year bachelor's degree
3. Minimum 10 years experience in either Electrical or Mechanical / Electro-mechanical field of work performing Engineering job function
4. Fluent in use of Microsoft applications and ability to quickly learn new computer programs/applications.
5. Excellent technical writing skills is mandatory.
6. Assignment is at NG factory in Baltimore - willingness to travel to Baltimore daily, or live in that area for 6-9 months.

Desirables:
1. Working knowledge of TipQA and/or Costpoint database applications
2. Knowledge in how to read schematics and wirelists
3. Willingness to travel (though not often) in support of spacecraft level activities.
4. Specific Lean or Six Sigma training from accredited institution.
 
Job Number: 10167058
Job Location: Linthicum, MD
Rate: Open
Per Diem: No
Overtime: yes
Duration: 10 Months
Start Date: ASAP
Input Date: 06/07/2020
Last Updated: 06/25/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Manufacturing/Production Operator

Description:
Senior Manufacturing/Production Operator

Job ID # 2020-11434

Contract Opportunity

Location: Scottsdale Arizona

Industry: Aerospace & Defense

Clearance Requirement: Secret Clearance

Minimum Education: High School Diploma

Minimum Experience: 2 Years

 

What You’ll Do:

Perform project tasks/assignments of a more complex nature ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables.
Read and interpret basic schematics and drawings, as well as follows methods, techniques, and sequence of operations in performing wiring, component installation, hand soldering, and cable harnessing on subassemblies and units.
Integrate sub-assemblies into final hardware, perform final assembly of small systems, perform basic electrical tests and perform more complex rework and refurbishment of hardware and systems.
 

What You’ll Need:

Clear knowledge of polarity and inspection criteria, Bills of Material (BOM), and applicable work order tracking management systems
Clear knowledge of measuring equipment and math, and solid communication skills
Creative thinking with the ability to multi-task
Commitment to ongoing professional development
Team player who thrives in collaborative environments and revels in team success
 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

 

Education & Experience:

High School Diploma or equivalent combined with 2 + years of relevant experience
 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/
 
Job Number: Job ID # 2020-11434
Job Location: Huntsville, AL
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 12 Months
Input Date: 06/18/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Manufacturing/Production Operator

Description:
Senior Manufacturing/Production Operator

Job ID # 2020-11431

Contract Opportunity

Location: Taunton Massachusetts

Industry: Aerospace & Defense

Minimum Education: High School Diploma

Minimum Experience: 2 Years

 

What You’ll Do:

Perform project tasks/assignments of a more complex nature ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables.
Read and interpret basic schematics and drawings, as well as follows methods, techniques, and sequence of operations in performing wiring, component installation, hand soldering, and cable harnessing on subassemblies and units.
Integrate sub-assemblies into final hardware, perform final assembly of small systems, perform basic electrical tests and perform more complex rework and refurbishment of hardware and systems.


What You’ll Need:

Clear knowledge of polarity and inspection criteria, Bills of Material (BOM), and applicable work order tracking management systems
Clear knowledge of measuring equipment and math, and solid communication skills
Creative thinking with the ability to multi-task
Commitment to ongoing professional development
Team player who thrives in collaborative environments and revels in team success
 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.



Education & Experience:

High School Diploma or equivalent combined with 2 + years of relevant experience.
 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/
 
Job Number: Job ID # 2020-11431
Job Location: Huntsville, AL
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 12 Months
Input Date: 06/18/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Principal Engineer ( Clearfield, Utah ) S9778040

Description:
Senior Principal Engineer ( Clearfield, Utah ) S9778040
12 Month Contract

Pay Rate: Open

Sr. Principal Composites Analysis and Test Engineer Materials to join our team in our Clearfield, UT offices.

**MUST HAVE AN ACTIVE SECURITY CLEARANCE TO BE CONSIDERED FOR THIS ROLE with last investigation within the last 4.5 years.

Role description & Responsibilities:
Highly motivated analysis engineer with composite structures experience for military and/or commercial aircraft.
Responsibilities include but are not limited to static and dynamic analysis of composite structures, bonded and bolted assemblies

The candidate also have experience with composite material mechanical characterization and dynamic testing (modal, forced vibe acoustic etc.) of coupon and sub-elements.

Ability to define and lead characterization and test activities, including: authoring test plans and test reports, data reduction and calculation of material allowables.

Experience Preferred:
• Previous experience in aerospace manufacturing facility
• Proficiency with NX, Catia V5, Fibersim, Altair Hyperworks/Optistruct, and Hypersizer are also desirable
• Definition of layups and ply patterns with Fibersim to generate finite element models
• Requirements definition and verification
• Constitutive Model Development and implementation
 
Job Number: S9778040
Job Location: Clearfield, UT
Rate: Open
Per Diem: No
Overtime: yes
Duration: 12 Month
Start Date: ASAP
Input Date: 07/12/2020
Last Updated: 07/26/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

Senior Principal RF Test Design Engineer (Secret Clearance)

Description:
PDS Tech Inc. is seeking a Senior Principal RF Test Design Engineer with Secret Clearance in Baltimore / Linthicum Heights, MD.
 
Bachelor’s degree in a technical area with 5 years of experience Designing Fixtures and Automating Lab Instruments
 
Basic Qualifications (Must Meet All):
  • C/C++ Software Programming proficiency
  • Electro-Mechanical Test Fixture Design
  • Familiarity with Lab Test Instruments (scopes, SpecAns, Network Analyzers)

  
  
 
 
  • US Citizen
  • Secret Clearance

 
Job Number: 1910108844
Job Location: Linthicum Heights, MD
Duration: 12 months
Input Date: 11/11/2019
Last Updated: 08/12/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fUChQAM&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Quality Inspector

Description:
Senior Quality Inspector

Job ID # 2020-11447

Contract Opportunity

Location: Taunton Massachusetts

Industry: Aerospace & Defense

Minimum Education: High School Diploma/GED

Minimum Experience: 2 Years

 

What You’ll Do:

Inspect parts and materials for compliance to specified requirements and perform real-time defect evaluation.

Preparation of QA documentation along with the verification of corrective action implementation and rework.

Strong communication skills to interface with coworkers and internal customers.



What You’ll Need:

Minimum of 2 years directly related experience
J-STD_001, 002, IPC 610, MIL-STD-883, MIL-STD-750 and X-Ray qualification certifications may be required
Distinct knowledge of material requirements, fabrication techniques, and manufacturability concepts
Experienced in the use of current strategic CAD tools; Pro-E/Creo or Solid Works preferred
Superior knowledge of the strategic CAD and file management tools and design documentation standards (e.g ASME Y14.5M, Geometric Dimensioning & Tolerancing)
Solid understanding of simple mechanical stress; structural, thermal and tolerance analysis
Team player who thrives in collaborative environments and revels in team success
Exceptional problem-solving and communication skills
Open to new ideas and serve as a champion for change when directed from management
Commitment to ongoing professional development
 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.



Education & Experience:

High School Diploma/ GED; or Associate’s degree in Electronics, Computer Science, Mechanical Engineering is preferred.
 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/
 
Job Number: Job ID # 2020-11447
Job Location: Taunton, MA
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 12 Months
Input Date: 06/23/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Staff Engineer Digital Board Design

Description:
Tasks of this role include collaboration with systems engineering, mechanical and electrical engineers to perform Digital Unit Development. The qualified candidate will be a digital design engineer who will work on digital hardware development with applications in signal processing, modem design, network routing and switching, or embedded processors for air and space applications. Responsibilities include but are not limited to:

-  Digital Hardware Development
-  Coordination with other design specialties such as packaging engineering
-  Requirements development & flow down
-  Support test Hardware development
-  Interface analysis
-  Board/unit Integration & test

Qualifications:

Basic Qualifications:


 - Bachelors of Science degree in a STEM field from an accredited institution with a minimum of 14 years of experience or 12 years of experience with a Masters Degree.
- A minimum of 14 years of experience in hardware design development or production
- Must be able to obtain and maintain an active U.S. Government security clearance

Preferred Qualifications:
 
 - 15 years of experience developing/testing Electronics for military or spacecraft applications
- Digital or Mixed signal unit, slice, board, and/or ASIC/FPGA design and development experience
- Master’s or PhD degree in Electrical or Computer Engineering or other Engineering field from an accredited institution
- Hands-on  knowledge of programmatic/cost account management (CAM) processes, project planning and scheduling, cost control, change control, EVMS, staffing, coordination and oversight of technical work effort
- Proven leadership experience and the ability to manage engineers and technicians in a process driven environment
- Experience in program execution and demonstrated ability to meet program technical, cost, and schedule milestones
- Exceptional communication skills (verbal, written, presentation) across all levels of the organization
 - Security Clearance (any level) 
 
Job Number: x20200037
Job Location: Redondo Beach, CA
Rate: $90/hr
Duration: up to 1 year
Input Date: 04/20/2020
Last Updated: 08/11/2020
Firm Name: XPEERANT
Attention: Woody Arnold
Address: 4308 N GARFIELD AVE
City, State: LOVELAND, CO 80538
Phone: 970/282-9287
Email: woody@xpeerant.com
Website: www.xpeerant.com

Staff Engineer Digital Board Design

Description:
Chipton-Ross is seeking a Staff Engineer, Digital Board Design for an opportunity in Redondo Beach, CA.

RESPONSIBILITIES:
Northrop Grumman is looking for an experienced individual to lead flight digital hardware board and unit development as a Responsible Design Engineer (RDE). Tasks of this role include collaboration with systems engineering, mechanical engineers, manufacturing engineers, and other electrical engineers to perform design trades, perform requirements flowdown, create interconnection drawings, perform electrical analysis, develop test plans, and ultimately deliver engineering model and flight hardware that meets program requirements.
The qualified candidate will be an experienced digital design engineer who will work on digital board design and development with applications in signal processing, network routing and switching, or embedded processors for air and space applications.
Responsibilities include but are not limited to:
Conceptual design.
Circuit Design.
Architecture development.
Schematics development.
Worst case analysis.
Board Integration & test.

REQUIRED EXPERIENCE:
Bachelors of Science degree in a STEM field from an accredited institution AND a minimum of 14 years' experience in electrical board or unit design (12 years with Masters of Science degree).
A minimum of 14 years of experience in hardware design/development or production.
Preferred Qualifications:
20 years of experience developing Electronics for military or spacecraft applications.
Digital or Mixed signal unit, slice, board, and/or ASIC/FPGA design and development experience.
Master's or PhD degree in Electrical or Computer Engineering or other Engineering field from an accredited institution.
Hands-on knowledge of programmatic/cost account management (CAM) processes, project planning and scheduling, cost control, change control, EVMS, staffing, coordination and oversight of technical work effort
Proven leadership experience and the ability to manage engineers and technicians in a process driven environment.
Experience in program execution and demonstrated ability to meet program technical, cost, and schedule milestones.
Exceptional communication skills (verbal, written, presentation) across all levels of the organization.

EDUCATION:
Bachelors of Science degree in a STEM field from an accredited institution or Masters of Science degree is required.

HOURS:
9/80 workweek.

 
Job Number: 184692
Job Location: Redondo Beach, CA
Rate: $85 to $95.00 DOE
Duration: 1 year
Input Date: 02/17/2020
Last Updated: 08/12/2020
Firm Name: CHIPTON ROSS
Attention: Robert Davis
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: rdavis@chiptonross.com
Website: www.chiptonross.com

Stress Engineer

Description:
PDS Tech is seeking a Stress Engineer in St. Louis, MO

Actively collecting and screening resumes for upcoming needs. 

An active Secret Clearance is required.  Flexible and part-time schedules will be considered.

  • The Stress (Analysis) Engineer will develop, analyze, design and establish test procedures for aero-structure products and airframe structure for a variety of internal and external customers
  • Design and analyze details of mechanically fastened and bonded joints for both composite and metallic airframe structures.
  • Support the design and development of 3D CATIA datasets and/or 2D drawings
  • Integrate technical, cost, value, and safety considerations into the product definition to comply with customer, regulatory and company requirements and document results in drawings, datasets, reports specifications and supporting data
  • Interface with other members of project or program team, management and manufacturing staff to develop producible products that reduce process times, rework, and scrap
  • Interface with customers and suppliers to achieve cost effective, technically sound and functionally superior product.

Basic Qualifications:



  • Bachelor’s degree in Engineering from an ABET accredited program.
  • 8+ years metals and/or composite analysis experience in an aero-structure design/manufacturing environment.
  • Strong computer skills with knowledge of Microsoft Office products.   Experience with CATIA V4/V5 a plus.
  • Experience with FEM (Finite Element Method) packages which includes Nastran / Patran and /or other packages such as ANSYS.   
  • Experience with hand calculations and template use/applications
  • Willingness to travel in support of the development effort


Preferred Qualifications:



  • Composites and Metallic experience 
  • PATRAN and/or NASTRAN
  • Previous Large Aircraft or Fighter Jet experience is a plus. 

Required: 

  • An active Secret Clearance is required.  
  • Must be a US citizen able to hold secret level security clearance. 
  • Bachelor’s degree in Engineering from an ABET accredited program.

 
Job Number: 2010114672
Job Location: Hazelwood, MO
Per Diem: Yes
Duration: 12 months
Input Date: 05/20/2020
Last Updated: 08/12/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003OrplQAC&URLSource=cjhunter

Stress Engineer

Description:
PDS Tech is seeking Stress Engineers for openings in the St. Louis, MO area and other locations across the US. 
Locations vary. Please contact a recruiter to determine currently open and upcoming locations.  
An active Secret Clearance is required.  Flexible and part-time schedules will be considered.

  • The Stress (Analysis) Engineer will develop, analyze, design and establish test procedures for aero-structure products and airframe structure for a variety of internal and external customers
  • Design and analyze details of mechanically fastened and bonded joints for both composite and metallic airframe structures.
  • Support the design and development of 3D CATIA datasets and/or 2D drawings
  • Integrate technical, cost, value, and safety considerations into the product definition to comply with customer, regulatory and company requirements and document results in drawings, datasets, reports specifications and supporting data
  • Interface with other members of project or program team, management and manufacturing staff to develop producible products that reduce process times, rework, and scrap
  • Interface with customers and suppliers to achieve cost effective, technically sound and functionally superior product.

Basic Qualifications:



  • Bachelor’s degree in Engineering from an ABET accredited program.
  • 8+ years metals and/or composite analysis experience in an aero-structure design/manufacturing environment.
  • Strong computer skills with knowledge of Microsoft Office products.   Experience with CATIA V4/V5 a plus.
  • Experience with FEM (Finite Element Method) packages which includes Nastran / Patran and /or other packages such as ANSYS.   
  • Experience with hand calculations and template use/applications
  • Willingness to travel in support of the development effort


Preferred Qualifications:



  • Composites and Metallic experience 
  • Patran or Nastran 
  • Previous Large Aircraft or Fighter Jet experience is a plus. 

Required: 

  • An active Secret Clearance is required.  
  • Must be a US citizen able to hold secret level security clearance. 
  • Bachelor’s degree in Engineering from an ABET accredited program.

 
Job Number: 1610051193
Job Location: Fort Worth, TX
Duration: 12 months
Input Date: 08/31/2018
Last Updated: 08/12/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000001ydMOAAY&URLSource=cjhunter

Structural Analysis Engineer

Description:


Chipton-Ross is seeking a Structural Analysis Engineer for an opportunity in Melbourne, FL.

RESPONSIBILITIES: Perform static, dynamic, and DaDT structural analyses of composite and metallic airframe structure, mechanical systems, and equipment, by hand and by using the automated methods and procedures approved for the program. Ensure that designs meet program requirements and are the lightest, lowest cost, and highest quality products consistent with schedule and budget objectives. The analyst may also be expected to derive non-flight applied loads, create, extract and distribute internal loads, and perform weight and stiffness optimization. Tools utilized may include FEMAP, NX, and other software applications.

REQUIRED EXPERIENCE: Bachelor's degree in a Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university, with a minimum of 14 years' experience in Aerospace Structural Analysis; (or a Master's Degree and 12 years' experience, or a PhD with 9 years' experience). Preferred Qualifications: Airframe experience with Advanced Composite Materials is Preferred.

EDUCATION: Bachelor's degree in a Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university is required. School must be accredited.

HOURS: 9/80 workweek

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 181068
Job Location: Melbourne, FL
Rate: $95 to $120.00 DOE
Duration: 6 months
Input Date: 04/12/2020
Last Updated: 08/12/2020
Firm Name: CHIPTON ROSS
Attention: Terry Jones
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: tjones@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer ( Clearfield, Utah ) S9271202

Description:
Structural Analysis Engineer ( Clearfield, Utah ) S9271202
12 Month Contract

Pay Rate: $70-80 /hr W2, maybe more for the right candidate

**MUST HAVE AN ACTIVE SECRET CLEARANCE

Currently seeking a Principal Composite Structure Analysis Engineer to join our team in our Clearfield, UT offices.
Candidate must have had their last investigation within the last 4 1/2 years. Role description & Responsibilities: Highly motivated analysis engineer with composite structures experience for military and/or commercial aircraft. Responsibilities include but are not limited to static and dynamic analysis of composite structures, bonded and bolted assemblies The candidate also have experience with composite material mechanical characterization and dynamic testing (modal, forced vibe acoustic etc.) of coupon and subelements. Ability to define and lead characterization and test activities, including: authoring test plans and test reports, data reduction and calculation of material allowables.

Experience Requirements:
**MUST HAVE AN ACTIVE SECURITY CLEARANCE TO BE CONSIDERED FOR THIS ROLE (Candidate must have had their last investigation within the last 4 1/2 years.)

** BS in Civil, Mechanical, or Aerospace Engineering or related with a minimum of 8 years related experience in analysis engineering function.
Minimum of 8 years of experience with Nastran or ABAQUS Static, dynamic and thermostructural analysis experience Test lab experience, including instrumentation and data reduction Knowledge of composite materials and manufacturing processes Excellent oral and written communication skills Ability to work in a fast paced dynamic environment as part of a multi-discipline team

Experience Preferred:
Previous experience in aerospace manufacturing facility Proficiency with NX, Catia V5, Fibersim, Altair Hyperworks/Optistruct, and Hypersizer are also desirable • Definition of layups and ply patterns with Fibersim to generate finite element models, Requirements definition and verification Constitutive Model Development and implementation

Skills & Qualifications: Strong interpersonal skills with the ability to work with a team Excellent communication skills. Ability to make sound decisions Ability to multi-task Ability to prioritize and manage time effectively Education/Certifications: BS degree in Civil, Mechanical, Aerospace Engineering, or related
 
Job Number: S9271202
Job Location: Clearfield, UT
Rate: Open
Per Diem: no
Overtime: yes
Duration: 12 Months
Start Date: ASAP
Input Date: 07/12/2020
Last Updated: 07/26/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

Structural Design Engineer

Description:
PDS Tech is seeking a Structural Design Engineer in St. Louis, MO  
An active Secret Clearance is required.  Flexible and part-time schedules will be considered.

Currently reviewing and collecting resumes for anticipated upcoming needs. 

Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 2010113357
Job Location: Hazelwood, MO
Duration: 12 months
Input Date: 03/20/2020
Last Updated: 08/12/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002frFRQAY&URLSource=cjhunter

Structural Design Engineer - CPD Or Fibersim Experience Required

Description:
Description
Develops CATIA 3D models, CPD definition, and 2D engineering definition for detail parts, assemblies, and installations
Establishes manufacturing tolerances for production of structural components
Develops and documents requirements and interface constraints for components
Coordinates with the structural substantiation department to ensure component performance in flight environments
Supports test definition to verify that components and manufacturing processes meet design intent and engineering requirements
Participates in the review, approval, and release process of engineering definition
Supports creation and review of manufacturing plans to ensure compliance with design requirements and company processes
Supports components throughout full lifecycle from prototype to final acceptance as well as modifications and repairs after installation
Uses engineering judgment to evaluate manufacturing issues and disposition nonconformance reports (NCR)


Qualifications
Bachelor’s degree from an accredited institution, with a concentration in Aeronautical, Astronautical, Aerospace, or Mechanical Engineering
3 years or more experience in structural design engineering for aerospace composite fabrication and assembly processes
Proficient with CATIA V5
Experience with Composite Part Design (CPD), or Fibersim. Assembly Design, Sketcher, Drafting, Wireframe, Surface Design
Experience with Generative Shape Design (GSD), GD&T and ASME Y14.5M-1994 drafting standards
Knowledge of manufacturing methods for various materials (composite layup, metal machining, 3D printing, bonded assembly, mechanical assembly)
Experience designing for aerospace environments
Experience in the development of human spaceflight hardware desired
Experience with Product Lifecycle Management (PLM) software and configuration management processes
Excellent analytical and decision-making skills
Excellent verbal and written communication skills. Excellent organizational and time-management skills Strong team player.
Proficient in Microsoft Office: Word, Excel, PowerPoint, Outlook

The Structures Company is an AA/EOE.
 
Job Number: 265
Job Location: Mojave, CA
Rate: $65-$70/Hr. **DOE**
Per Diem: Yes
Overtime: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 08/11/2020
Last Updated: 08/12/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

Structural Design Engineer- Secret

Description:
PDS Tech is seeking a Structural Design Engineer in St. Louis, MO

Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.

PDS Tech is a premier supplier of highly skilled technical personnel to the aerospace and defense industries.  These are long term assignments in the St. Louis, MO area. Client is accepting resumes now for review.  Please connect with us now for immediate consideration.  Apply to this posting, or contact Gus Sanchez at 314-264-3135 or gsanchez@pdstech.com for more information.

 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 3 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • Must have active secret clearance, investigation close dat within the last 5 years 
  • Composite experience 

PDS Tech is a premier supplier of highly skilled technical personnel to the aerospace and defense industries.  These are long term assignments in the St. Louis, MO area. Client is accepting resumes now for review.  Please connect with us now for immediate consideration.  Apply to this posting, or contact Gus Sanchez at 314-264-3135 or gsanchez@pdstech.com for more information.
 
Job Number: 1910100035
Job Location: Hazelwood, MO
Duration: 12 months
Input Date: 03/27/2019
Last Updated: 08/12/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002jYT3QAM&URLSource=cjhunter

Structural/Mechanical Design Engineer

Description:
CATIA V5 experience
 
Job Location: Dallas, TX
Duration: 50/hr
Input Date: 04/17/2017
Firm Name: JOHNSON SERVICE GROUP
Attention: Michael Geil
Address: 1600 AIRPORT FWY STE 400
City, State: BEDFORD, TX 76022-6871
Phone: 817/545-4009
Fax Phone: 817/545-2006
Email: mgeil@jsginc.com
Website: www.jsginc.com

Structures & SystemsTest Engineer

Description:
Seeking an experienced structures & systems test engineer to support testing of mechanical systems and avionics components, assemblies, and integrated systems. The main tasks of this role are to define test requirements with internal customers, write test plans, design test stands and execute tests under the direction of the Engineering lead and/or Manager. Engineers in this position are expected to have knowledge of industry standard test practices and methods as well as engineering skills in design and analysis to required to develop custom tests.


Must have experience with:
• Mechanical systems, specifically pneumatic valves.
• RTCA – DO-160
• Vibration & thermal testing
• Functional testing
• Knowledge of test procedures
• Acceptance testing
• Data analysis
• Thermocouples
• CAD drawings – CATIA V5
• FEMAP and NASTRAN
• LabView
• SolidWorks
• Must be able to write reports


Your Mission:
• Design tests plans and equipment for validation of complex mechanical or structural components and systems.
• Write test plans and procedures to define and support execution of tests.
• Interface with internal customers on integrated program teams to establish and verify specific test requirements.
• Work with support teams and vendors to procure, manufacture and assemble test articles and test stand hardware and equipment.
• Analyze test data to verify test requirements and write test reports to document test results.
• Interface with external test laboratories to facilitate testing for design and analysis teams.
• Participate in the test engineering review, approval and release process.
• Participate in the continuous improvement of testing practices, including test processes, lab procedures and lab technology implementation.


What you bring:
• Bachelor’s degree from an accredited institution, with a concentration in a relevant Engineering discipline.
• 4-8 years’ or more experience in aerospace with an emphasis on testing or equivalent laboratory test engineering experience
• CAD modelling experience – Experience with Catia V5 preferred
• Experience with simulation and finite element analysis preferred – NASTRAN, Femap
• Experience with DO-160 environmental test standards for mechanical systems
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
• Focus on safety and reliability in testing.
• Results oriented approach to completing test activities successfully.
• Excellent verbal and written communication skills
• Excellent Organizational Skills and problem-solving skills
• Strong team player.
• Excellent computer skills, including Outlook, Word, Excel and PowerPoint


ITAR Requirements
To conform to U.S. Government space technology export regulations, applicant must be a U.S. citizen, lawful permanent resident of the U.S.

The Structures Company is an AA/EOE.
 
Job Number: 290
Job Location: CA
Rate: $70-$75/Hr. **DOE**
Per Diem: Yes
Overtime: Possible
Duration: 10+ Months
Start Date: ASAP
Input Date: 05/26/2020
Last Updated: 08/12/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

Systems Engineer

Description:
Chipton-Ross is seeking a Systems Engineer for an opportunity in Hood River, OR.

RESPONSIBILITIES:
Contributes to the development of systems concepts of operations.
Performs subsystem requirements definition, synthesis, analysis and allocation.
Conducts requirements decomposition, develops functional/physical block diagrams and defines subsystem interface requirements.
Analyzes vertical/horizontal requirements traceability.
Defines subsystem verification methodology and develops quality assurance provisions. Analyzes use cases and defines information exchanges, physical architecture, and interfaces.
Evaluates customer requirements, constraints, and operational expectations and develops product design recommendations.
Performs trade studies and evaluates alternatives. Identifies and provides input to technical risk and opportunity analysis.
Develops design hierarchy and integrates specialty engineering provisions.
Performs systems modeling.
Drafts test plans and procedures.
Identifies instrumentation and data acquisition requirements and makes recommendations. Executes tests and contributes to test reporting.
Analyzes and develops verification results.
Assists or performs engineering analysis to include affordability, safety, reliability, maintainability, testability, human factors/human systems integration, survivability, vulnerability, susceptibility and system security.
Assists with system design reviews.

REQUIRED EXPERIENCE:
- Experience with the integration and testing of propulsion systems is required.
- Knowledge of various engineering disciplines such as electrical, mechanical, and systems. The ability to communicate with technical personnel from multiple skill areas and functions to evaluate technical information and issues impacting design, production, and support of products, services, or other deliverables.
- Experience establishing test requirements from supporting documentation, test plans, internal and external customers. Knowledge of domestic and international regulations (e.g. FAA and DOD regulations) on the certification of test articles/vehicles to assure compliance of design.
- Can apply technical standards, principles, theories, concepts, and techniques.
- Provides solutions to a variety of technical problems of moderate scope and complexity.
Works under general supervision. Follows established procedures.

EDUCATION:
2-4 years in an engineering classification with a Accredited Bachelor's degree or 0-2 years' experience in an engineering classification with a Accredited Master's degree.

FULL TIME - 9/80 WORK WEEK



 
Job Number: 186114
Job Location: Hood River, OR
Rate: Up to $40.00 DOE
Duration: 6 Months
Input Date: 06/10/2020
Last Updated: 08/12/2020
Firm Name: CHIPTON ROSS
Attention: Kevin Suk
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: ksuk@chiptonross.com
Website: www.chiptonross.com

Systems Engineer - DEFENSE

Description:
PDS Tech, Inc., is seeking a Systems Engineers- DEFENSE, in Wichita, KS.
 

Key Accountabilities:



  • Develop, analyze and manage system and structural requirements
  • Develop and evaluate alternative concepts, architectures and designs to select optimal, balanced solutions reflecting life-cycle considerations
  • Analyze system functionality and effectiveness with respect to any of the following: performance, cost, producibility, reliability, maintainability, testability, or affordability
  • Analyze structure operational and life-cycle characteristics to support project decision-making and ensure product compliance with technical requirements and project constraints
  • Apply technical analyses to identify performance trends and root cause to propose corrective action (RCCA)
  • Ability to develop and document allocations, predictions, assessments, and analyses that compare the product design capabilities and usage experience to contract requirements
  • Identify, define, and manage product interfaces
  • Plan, conduct and monitor integration and verification activities
  • Completely understands and applies job practices, techniques, standards, principles, theories, and concepts. Possesses general knowledge of other related disciplines
  • Provides technical solutions to a wide range of difficult problems. Develops solutions that are imaginative, thorough, practicable, and consistent with organization objectives
  • Independently determines and develops approaches to solutions. Receives general direction for work that is reviewed upon completion for adequacy in meeting objectives
  • Contributes to the completion of specific programs and projects. Failure to obtain results, reaching erroneous decisions or making recommendations would typically result in serious program delays and considerable expenditure of resources
  • Interacts frequently with inter-organizational personnel and external customers. Represents the organization by providing solutions to difficult technical issues associated with specific projects

Requirements:
  • This role requires US Citizenship
  • Candidates must hold Security Clearance – Secret or Above - Last Investigation within 6 years.
  • Bachelor’s Degree in Systems, Aerospace, Mechanical or Electrical Engineering or other related course of study
  • Strong verbal and written communication skills with attention to detail
  • Self-motivated; taking ownership of projects and issues, including follow through to closure and resolution


 Preferred Experience & Skills:



  • Experience with industry standard Systems Engineering principles and tools (e.g. Dassault 3DX, TeamCenter, Enovia, DOORS, MagicDraw, Cameo, etc.)
  • Reliability and Maintainability experience
  • System Safety experience



 
 
Job Number: 2010115699
Job Location: Wichita, KS
Per Diem: Yes
Duration: 12 months
Input Date: 06/16/2020
Last Updated: 08/12/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Rick Ingle
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003OvU7QAK&URLSource=cjhunter

Systems Engineer Level 2

Description:
Chipton-Ross is seeking a Systems Engineer Level 2 for an opportunity in Hood River, OR.

RESPONSIBILITIES:
seeking an experienced Systems Engineer to work in design, requirements definition, analysis and test supporting the S.
Performs subsystem requirements definition, synthesis, analysis and allocation.
Conducts requirements decomposition, develops functional/physical block diagrams and defines subsystem interface requirements.
Analyzes vertical/horizontal requirements traceability.
Defines subsystem verification methodology and develops quality assurance provisions. Analyzes use cases and defines information exchanges, physical architecture, and interfaces.

Evaluates customer requirements, constraints, and operational expectations and develops product design recommendations.
Performs trade studies and evaluates alternatives. Identifies and provides input to technical risk and opportunity analysis.
Develops design hierarchy and integrates specialty engineering provisions.
Performs systems modeling.
Drafts test plans and procedures.
Identifies instrumentation and data acquisition requirements and makes recommendations. Executes tests and contributes to test reporting.
Analyzes and develops verification results.
Assists or performs engineering analysis to include affordability, safety, reliability, maintainability, testability, human factors/human systems integration, survivability, vulnerability, susceptibility and system security.
Assists with system design reviews.


REQUIRED EXPERIENCE:
- Knowledge of various engineering disciplines such as electrical, mechanical, and systems. The ability to communicate with technical personnel from multiple skill areas and functions to evaluate technical information and issues impacting design, production, and support of products, services, or other deliverables.
- Experience establishing test requirements from supporting documentation, test plans, internal and external customers. Knowledge of domestic and international regulations (e.g. FAA and DOD regulations) on the certification of test articles/vehicles to assure compliance of design.
- Can apply technical standards, principles, theories, concepts, and techniques.
- Provides solutions to a variety of technical problems of moderate scope and complexity.
- Works under general supervision. Follows established procedures.
- Contributes to completion of milestones associated with specific projects.
- Derives and allocates requirements (e.g., system, sub-system, software) and show traceability throughout the product lifecycle.
- Knowledge and understanding of phases of system development lifecycle including (requirements definition, system design, build/integrate, test and deployment).

EDUCATION:
2-4 years in an engineering classification with an Accredited Bachelor's degree or 0-2 years' experience in an engineering classification with an Accredited Master's degree.

FULL TIME - 9/80 WORK WEEK

 
Job Number: 186103
Job Location: Hood River, OR
Rate: Up to $39.00 DOE
Duration: 6 Months
Input Date: 06/11/2020
Last Updated: 08/12/2020
Firm Name: CHIPTON ROSS
Attention: Christophor Long
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: clong@chiptonross.com
Website: www.chiptonross.com

Systems Engineer Level 2

Description:
Chipton-Ross is seeking a Systems Engineer Le