Job Search Results

519 listings were found that matched your search words: Keywords: Aerospace ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2019/09/22 Sunday 12:49AM Pacific Time by ContractJobHunter. )

Listings 1 - 519

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2 System Design Engineers - hydraulics, Landing Gear or fuel Systems Experience Needed

Description:
Seeking System Design Engineers with 10+ years of experience with detail design of mechanical systems. (hydraulics, landing gear or fuel, etc.) utilizing Catia V5. BS Degree required.

***1 position is located in Manassas, VA and 1 position will be located in Cambridge, MA.***


Duties:
Design aircraft mechanical systems based on customer requirements
Establishes manufacturing tolerances for production of components using GD&T
Design for Manufacturing (DFMA)
Supports review of manufacturing plans and procedures to ensure compliance with design requirements


Requirements:
Bachelor’s degree in Mechanical or Aerospace Engineering from an accredited institution much preferred.
Experience with CATIA V5
Experience in detail design of aircraft mechanical systems, or aircraft composite/metallic structure.
Experience designing hydraulics, landing gear or fuel systems.
DFM experience required
Minimum of 10+ years of experience as a design engineer within the aircraft industry.
Experience with Model Based Definition and GD&T
Experience with Product Lifecycle Management tools (PLM software), Requirements management tools and configuration management
US Citizen required



The Structures Company is an AA/EOE.
 
Job Number: 278
Job Location: VA & MA
Rate: $75-$78/Hr.
Per Diem: Yes
Duration: 9 Months - Possibly longer
Start Date: ASAP
Input Date: 04/01/2019
Last Updated: 05/01/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2460 - BUSINESS ANALYST - cv. word doc only

Description:
Produce, maintain and respect the project schedules;

Lead, coordinate and govern meeting for any Process & Tool (SAP) implementation, Adjustment or improvement with the respective project stakeholders;

Produce and maintain Project Management indicators;

Understand and document manufacturing function's business requirements and processes;

Identify and propose solutions meeting business requirement;

Participate in multifunction workshop sessions and activities following SAP implementation;

Identify and manage master data modification;

Perform SAP improvement testing with IT;

Ensure efficient communication and change management with impacted functions;

Identify and document training requirement, perform training with users and super users;

Provide support to SAP users;

Ensure user support, troubleshooting and RFCs tracking with IT teams

Have a Bachelor's degree in Industrial Engineering, Operation Management, Computer engineering or any equivalent relevant experience.

Must have a minimum of 5 years of relevant employment experience.

Have organization skills, rigor and autonomy.

Demonstrate strong leadership skills and love challenges.

Have a great sense of initiative.

Have a very good knowledge of MS Office (Excel, MS Project, Power Point, Visio).

Experience in aerospace or cabinet manufacturing industry is an asset.

Strong knowledge of SAP, a major asset.

Bilingual - (French and English) is required.
 
Job Number: 2460
Job Location: Montreal, Canada
Rate: 50.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 01/04/2019
Last Updated: 03/14/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2500 - ELECTROMAGNETIC COMPATIBILITY (EMC) ENGINEER - cv, word doc only - On Hold

Description:
Responsible at the aircraft and system level for Electromagnetic Compatibility (EMI)/High Intensity Radiated Fields (HIRF)/Lightning Strike/ Electrostatic Discharge technical requirements.

Knowledge of relevant industry standards (RTCA/DO-160, SAE ARP) and high level of familiarity with airworthiness (TCCA, FAA, EASA) Regulations and Advisory Materials pertaining to EMI, HIRF, Lightning and Electrostatic Discharge.

Execute intermediate to complex engineering assignments related to EMI, HIRF, and Lightning and Electrostatic Discharge requirements.

Analyze new systems designs, assess technical impacts, propose EMC compliance approaches, review/approve technical documents, test plans, test procedures and test reports, and check compliance with certification regulations.

Define scope of work for EMC effort of technical/engineering projects, estimate the time required, plan, highlights technical risks and execute according to priorities.

Define technical requirements, test requirements and perform detailed analysis to ensure aircraft and systems compliance to EMC certification regulations.

Prepare EMI, HIRF, Lightning and Electrostatic Discharge test procedures, execute tests in laboratories and on aircraft and generate results and analysis test reports.

Support and witness EMC tests in Canada, United States and Europe as needed.

Master degree in Electrical or EMC Engineering, or alternatively a Bachelor's degree in Electrical or Physics Engineering with a minimum of eight (5) years of experience in aircraft EMC/HIRF/Lightning/Electrostatic Discharge (FAR 25.981 is an asset).

8 years of experience or more in an aerospace manufacturing company.

Have EMC bench and/or aircraft testing experience.

Have a minimum of five (5) years working experience with systems qualification/certification.

Knowledge of harness design, aircraft design principles including familiarity with aircraft regulatory requirements.

Proficient with the use of PC including Microsoft Office software tools.

Energetic person with strong written and oral communication and interpersonal skills, a high sense of commitment, and a willingness to accept responsibilities while acting independently in a high-pressure partner/supplier team environment.

Must be familiar with DO160, STD ARP, MIL STD, FAA regulations, as well as other applicable airworthiness regulations.

Must be able to analyze modifications at aircraft level and check compliance with certification regulations.

Must be able to support and witness EMC tests in Canada, United States and Europe as needed.
 
Job Number: 2500
Job Location: Montreal, Canada
Rate: 52.00
Per Diem: Paid 3 Months only
Overtime: Paid NOT at 1.5
Duration: 36+ Mths
Start Date: ASAP
Input Date: 05/09/2019
Last Updated: 05/29/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2523 - HYDRO-MECHANICAL SYSTEMS ENGINEER - cv, word doc only - On Hold

Description:
Take part in the integration of the flight control, hydraulic and/or landing gear system for the definition, specification, design, analysis, modification, test and certification of hydro-mechanical systems

Coordinate product development activities between the supplier of the system and the affected work packages

Ensure successful design, validation, certification and delivery of the system

Ensure successful completion of each development phase deliverables (may author, review, approve)

Problem solve the technical issues in a cross functional environment

Be involved in the design and integration of the system

Review the design and documentation of all the aspects related to your system

Check for quality of the Supplier's analyses

Validate and verify system requirements as well as system performance through design reviews, analyses, rig and aircraft testing

Define, prepare and execute qualification and certification tests

Work with supplier in the investigation and resolution of test findings

Bachelor or Master's (preferred) degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of five (5) to seven (7) years

Background in design, integration, development and certification of Hydro-Mechanical Systems

Cognizant of the relevant Airworthiness Regulations and certification process

Good oral and technical writing skills in English (required)

Motivated, self-starter, organized, autonomous and able to work under limited supervision

Team player and able to work with suppliers and customers

Dynamic person with initiative, a strong sense of responsibility and good judgment

Knowledge of MS Office software (essential)

Knowledge of CATIA, Matlab, Simulink (an asset)
 
Job Number: 2523
Job Location: Toronto, Canada
Rate: 57.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 05/09/2019
Last Updated: 05/09/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2524 - PROPULSION SYSTEMS ENGINEER - cv, word doc only

Description:
Design and integration of the system.

Review of the design and documentation of all the aspects related to your system.

Checking for quality of the Supplier's analyses.

Validation and verification of system requirements.

Validation and verification of system performance through design reviews, analyses, rig and aircraft testing.

Definition, preparation and execution of qualification and certification tests.

Working with supplier in the investigation and resolution of test findings.

Preparation or review of qualification or certification reports.

Working with suppliers to establish complete system requirements and system interfaces.

Liaison with stress, loads, reliability, maintainability and safety (RM&S), simulation, customer and operations support departments.

Identify issues and obstacles, follow-up and communicate progress.

Prepare reports or presentations.

Bachelor or Master's (preferred) degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of five (5) to seven (7) years.

Background in design, integration, development and certification of Propulsion Systems.

Cognizant of the relevant Airworthiness Regulations and certification process.

Good oral and technical writing skills in English and French (required).

Motivated, self-starter, organized, autonomous and able to work under limited supervision.

Team player and able to work with suppliers and customers.

Dynamic person with initiative, a strong sense of responsibility and good judgment.

MS Office software (essential).

Good knowledge of DO-160, FAR/CAR25 Regulations.

Previous experience in providing engineering support to a Final Line/Production would be an asset.
 
Job Number: 2524
Job Location: Toronto, Canada
Rate: 57.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 04/25/2019
Last Updated: 05/22/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2525 - METHODS ENGINEER - AFTERNOON SHIFT - cv, word doc only

Description:
Support the Client Final Line Assembly activities for a timely resolution of production line issues related to system integration.

Witness system functional testing and conduct technical investigations / troubleshooting on Hydro-Mechanical Systems (ATA 27, ATA 29, ATA 32), analyze and develop solutions / recommendations.

Support production to resolve non-conformance (NCR), tooling issues and procedure clarification / correction.

Track and ensure successful implementation of systems installations and modifications

Support the line by producing return into service (RTS) documentation.

Develop good working relationships with various departments within BA and with all suppliers

Bachelor Degree in Engineering or Master Degree (Aerospace Manufacturing, Aircraft Maintenance etc.).or a diploma from a technical college.

3-8 years%u2019 experience in aircraft Electrical and Avionics systems (Communication, Electrical Power, Indication/Recording Systems, Navigation, and Information Systems)and / or in Hydro-Mechanical Systems (Fly-by-Wire systems, Wing High-Lift, Landing gear, Hydraulic Systems).

Experience in providing support / troubleshooting to Aircraft Maintenance / Final Line / Production Line / Test Bench / Simulator.

Are process oriented.

Possess strong analytical skills, you are a quick learner.

Are a team player, able to work in high-stress environment.

Have excellent interpersonal and communication skills.

Autonomous persons, capable of managing time and prioritites

Must have a good knowledge of MS Office and Requirements Management tools.

Knowledge of SAP is an asset.

Knowledge of MES is an asset.
 
Job Number: 2525
Job Location: Toronto, Canada
Rate: 51.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 01/04/2019
Last Updated: 04/04/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2528 - ELECTRICAL SYSTEMS ENGINEER - cv, word doc only

Description:
Integrate electrical systems on Client family of aircraft (including power generation systems, electrical wiring interconnection systems (EWIS), lighting systems, etc.).

Ensure that all new electrical system concepts meet applicable aircraft system requirements (FAR, RTCA DO160, etc.) and to Client Aerospace requirements and practices.

Prepare requirement documents including technical quotations, system schematics, technical requirement documents (TRD) and statement of work (SOW).

Analyze and approve new system concept proposals and integrate them in aircraft documentation.

Prepare functional test engineering requirements (FTER), Test definition Sheets (TDS) and electrical systems certification reports.

Coordinate with system suppliers to achieve good integration.

Communicate and coordinate with Transport Canada's design approval designees (DADs).

Provide the required electrical expertise and support for the integration of all other aircraft systems (avionics, hydromechanical, pneumatics, propulsion, etc.).

Investigate system problems identified on aircraft in service or in production. Provide engineering dispositions and repair procedures.

Create electrical system schematics and review system

University degree in Engineering or equivalent.

Must be a team player showing initiative, have a strong sense of responsibility and possess good technical and commercial judgment

Must have at least 5 years relevant experience with the specification, design, development, integration, test and certification of Electrical systems on aircraft.

Technical experience on the Client family of aircraft is an asset.

Must have strong English (written and spoken) communication skills.

Must be capable of working under pressure, be attentive to details, have good planning skills and be fully committed to accomplishing work on time and on schedule.

Must have abilities in AutoCAD/AutoSketch.

Must be familiar with part FAR25 / 525 certification process.

Must be computer literate and familiar with commonly used software (MS Office).
 
Job Number: 2528
Job Location: Mirabel, QC, Canada
Rate: 58.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 04/25/2019
Last Updated: 05/09/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2529 - HYDRO-MECHANICAL SYSTEMS ENGINEER

Description:
Integrate hydromechanical systems on CRJ Family of aircraft (including landing gear, flight control, hydraulic systems, etc.).

Provide the required hydromechanical expertise and support for the integration with other disciplines (including design, RM&S, airworthiness, electrical, avionics,
propulsion, etc.).

Coordinate with system suppliers to achieve good integration.

Investigate system problems identified on aircraft in service or in production.

Provide engineering dispositions and repair procedures.
Support Continuous Airworthiness (CAW) processes.

Analyze and approve new system concept proposals and integrate them in aircraft documentation.

Ensure that all new hydromechanical system concepts meet applicable aircraft system requirements (FAR, RTCA DO160, etc.) and Client Aerospace requirements and practices.

Communicate and coordinate with Transport Canada's design approval designees (DADs).

Prepare requirement documents including technical quotations, system schematics, TRDs and statement of work (SOW).

Prepare and/or review system definition drawings, qualification documentations, functional test engineering requirements (FTER), Test definition Sheets (TDS), design compliance reports, reliability reports and other system certification
reports.

Provide technical support to the production line and to in-service aircraft as required.
University degree in Engineering or equivalent experience, in the mechanical field. A specialization in aeronautical applications is desirable.

Technical experience on the Client family of aircraft is an asset.

Must have strong English (written and spoken) communication skills.

Manage various projects under strict budget and schedule requirements.

Are able to manage conflicts and solve problems.

Are self-starter, enthusiastic, well organized and customer oriented.
 
Job Number: 2529
Job Location: Mirabel, QC, Canada
Rate: 54.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 04/25/2019
Last Updated: 05/09/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2536 - DESIGN ENGINEER - cv, word doc only

Description:
Participate in design reviews and exchange / communicate your thoughts.

Provide estimate of design related activities.

Support suppliers, production and final line installations.

Bachelor Degree in Mechanical or Aerospace engineering or equivalent with a minimum of five (5) years of relevant experience.

Possesses or cumulate experience in:
Design of aircraft structures with CATIA V5/FiberSim.
Ability to understand complex engineering issues .
General computer skills.

Must be a self-motivated person, a team player able to work under pressure and under a minimum of supervision.

Have an excellent record of meeting your commitments with success.

Bilingual - possess strong communication skills in both French and English.
 
Job Number: 2536
Job Location: Mirabel, QC, Canada
Rate: 51.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 04/25/2019
Last Updated: 05/09/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2544 - PROPULSION SYSTEM / FUEL ENGINEER - cv, word doc only

Description:
Design and integration of the system.

Review of the design and documentation of all the aspects related to your system.

Checking for quality of the Supplier's analyses.

Validation and verification of system requirements.

Validation and verification of system performance through design reviews, analyses, rig and aircraft testing.

Definition, preparation and execution of qualification and certification tests.

Working with supplier in the investigation and resolution of test findings.

Preparation or review of qualification or certification reports.

Working with suppliers to establish complete system requirements and system interfaces.

Liaison with stress, loads, reliability, maintainability and safety (RM&S), simulation, customer and operations support departments.

Provide support to business units in Propulsion Control requirement definition, verification and validation, following ARP4754.

Identify issues and obstacles, follow-up and communicate progress.

Prepare reports or presentations.

Bachelor or Master's (preferred) degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of ten (10) years.

Possess very good knowledge in Propulsion Control Systems and their integration on the aircraft.

Have a background in design, integration, development and certification of Propulsion Systems.

Are cognizant of the relevant Airworthiness Regulations and certification process.

Have good oral and technical writing skills in English and French (required).

Are motivated, self-starter, organized, autonomous and able to work under limited supervision.

Are a team player and able to work with suppliers and customers.

Are a dynamic person with initiative, a strong sense of responsibility and good judgment.

Have knowledge of MS Office software (essential).
 
Job Number: 2544
Job Location: Montreal, Canada
Rate: 56.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 04/25/2019
Last Updated: 05/29/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2551 - REPAIR DESIGNER - ISE STRUCTURES - cv, word doc only

Description:
Actively support the Client Aircraft design team to ensure customer expectations are met.

Design generic repairs for metallic and composite structures.

Design specific repairs for damages exceeding Aircraft Structural Repair Publication (ASRP) limitations.

Support operators with technical support on repair-ability of their Client Aircraft fleet.

Perform investigation on in-service structural issues affecting reliability, dispatch-ability and repair-ability.

Participate in the design and support of structural modifications.

Represent Client Customer Support in internal and external committees.

Participate in the continuous improvement initiatives of the Customer Support organization.

Bachelor degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of five (5) years in the aerospace industry.

Detailed knowledge of CATIA V5 (preferably R19) and Enovia.

Are comfortable in interrogating aircraft structure repair.

Knowledge of MS Office software (Word, Excel, PowerPoint, etc).

Dynamic person with initiative, a strong sense of responsibility, customer oriented and good judgment.

Are organized, able to manage your time and prioritize tasks effectively, while working toward tight deadlines.

Bilingual - have strong, written and spoken, communication skills in English and French.

Available for occasional travel on short notice.

Having knowledge of Client Aircraft engineering, drawing and configuration control systems is an asset.

Having detailed knowledge of airline operation, engineering and maintenance is an asset.
 
Job Number: 2551
Job Location: Mirabel, Canada
Rate: 55.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 03/13/2019
Last Updated: 04/04/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

2 Aircraft Stress Engineers with Composites

Description:
2 Aircraft Composite Stress Engineers Needed.
Require 10+ years of aircraft/aerospace stress analysis with a good composites background.
Previous FEMAP experience is a plus.
Composite airframe analysis experience a MUST.
MUST be US Persons

Qualifications:
-Experience in aircraft or spacecraft composite, design and analysis processes
-Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures
-Minimum 10 years or more of applicable experience in the analysis of structural systems using strength of materials and finite element based methods
-Experience with free-body diagrams and classical stress analysis techniques
-Experience with FEMAP
-Rapid prototyping experience a strong plus
-Excellent computer skills, including Outlook, Word, Excel and PowerPoint
-Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
-Applicants must be U.S. persons as defined by ITAR
Educational Requirements-
Bachelors degree from an accredited institution, with a concentration in a relevant Engineering discipline

The Structures Company is an AA/EOE.
 
Job Location: Mojave, CA
Rate: $80-85/hr
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 06/25/2019
Last Updated: 09/21/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: chrissheets@thestructurescompany.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineers

Description:
Skill set:
Must have Primary and secondary structural design experience. Light aircraft (FAR 23) is preferred.

Excellent detail design skills, along with a combination of composites and metal part and assembly design background. Must have CATIA V5 and CPD experience (composite part design workbench in CATIA).


Position Responsibilities
Under the direction of project design engineering, serve as a member of a design team providing structural detail design for commercial light/general aviation aircraft. The main product line will require design-to-build activities for a commercial (Far 23) aircraft composed of primary/secondary metallic structure (some composite).

Minimum Requirements
· US Citizen, Green Card Holder or Permanent Residence Status
· A degreed candidate is highly desired
· 10 years of experience in Aerospace design is a minimum
· CATIA v5 (R25/R26 preferred)
· Entirely 3D CAD Design using Model Based Definition (MBD)
· Experience with ENOVIA\SmarTeam
· Experience with FAR 23 aircraft is preferred

The Structures Company is an AA/EOE.
 
Job Number: 242
Job Location: Manassas, VA
Rate: $72-$75/Hr. **DOE**
Per Diem: Yes
Duration: 9 Months
Start Date: ASAP
Input Date: 04/09/2019
Last Updated: 04/10/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Advanced Fire Control Systems Engineer

Description:
Our client, a market leader and technology innovator, is seeking talented professionals to deliver cutting edge solutions to their customers. Well-respected, with a global presence, our client consistently offers a powerful and robust portfolio of products, services and solutions that help customers successfully execute their missions in today’s dynamic environment. With unsurpassed engineering, using an open systems approach, our client solves the nation’s most complex challenges while foreseeing future needs.

Advanced Fire Control Systems Engineer
(US Citizenship Required*)
Pittsfield, MA
2019-8176

Responsibilities:
• Participate in requirements analysis, definition, and management, functional & performance analysis, system design, trade studies, systems integration and test (verification), validation and interface definition studies of system elements with minimal supervision of the lead systems engineer
• Perform technical planning; analyze cost, risk, supportability, & effectiveness, for subsystems & system elements
• Analyze customer requirements, develop system requirements and define allocations to lower levels (subsystem, elements and components)
• Perform detailed technical analyses for a system, subsystem or system elements
• Develop and evaluate systems, networks and information systems to ensure designs meet applicable governmental security specifications
• May provide system accreditation/certification evaluation and test support to ensure all technical security features (e.g., identification, authentication, access control, labeling, and auditing) of the system are considered and function properly
• May develop system security documentation on both new and fielded information systems
• Contribute to detailed technical analyses at the system of system (SOS) level
• Synthesize solutions to meet customer expectations and technical performance while staying within schedule and cost constraints
• Lead Modeling and Simulation activities
• Research and analyze data, such as vendor products, COTS components, GFE/CFE, specifications, and manuals to determine feasibility of design or application
• Support generation of technical engineering products by using the appropriate standards, processes, procedures, and tools throughout the system development life cycle
• Research, design, and develop systems, in conjunction with software and hardware product development, applying principles and techniques of systems engineering, modeling and simulation and analysis
• Lead and/or direct lower level employees; lead technical tasks for small teams or projects
• Begin to provide engineering support to proposals
• Participate in or lead SOW generation for subcontracts
• Exercise latitude in determining technical objectives of assignments
• Guide the successful completion of major programs and projects
• Plan and execute significant project tasks for activities described above
• Define processes for technical platforms, system specifications, input/output and working parameters for hardware and/or software compatibility
• Design a complete and complex framework, system or product
• Determine methods and procedures on new assignments and may coordinate activities of other personnel (Team Lead)
• Having wide-ranging experience, uses professional concepts and company objectives to resolve complex issues in creative and effective ways
• Identifies, analyzes and resolves system design weaknesses
• Frequent contact with managers, project teams, and external customers and vendors; occasionally with Business Development
• Travel may be required
• Resolve diverse, complex problems which using ingenuity and creativity
• Contribute to the achievement of business objectives and development of new theories and method

Qualifications:
• Required – active Secret clearance. Candidates without active clearance will not be considered.
• Strong use and understanding of systems engineering concepts, principles, and theories
• Strong knowledge of other related disciplines
• Strong proficiency with requirements management & system modeling tools
• Recognizes various architectural patterns and applies them appropriately
• Strong proficiency in Microsoft Office applications
• Strong written and verbal communications skills
• Ability to get buy-in on concepts and ideas
• Creative thinker, multi-tasker
• Effective in communicating issues, impacts, and corrective actions
• Strong ability to clearly report information relevant to sound systems engineering design
• Strong understanding of basic project leadership principles including SPI/CPI, Earned Value, Cost Account Management (CAM), and Statistical Process Controls
• Agile experience preferred.
*US Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's degree in systems engineering, a related specialized area or field is required (or equivalent experience) 8+ years of relevant experience; or Master's degree 6+ years of relevant experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-8176
Job Location: Pittsfield, MA
Rate: Based on experience
Input Date: 03/08/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: jobs@moseleytechnical.com
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Aerospace Engineer - Air Systems

Description:
  1. Support Flight Testing Activities, including but not limited to:
    1. Discuss and review test plans and preparation activities.
    2. Help determine test specifications (based upon system architecture).
    3. Attend Ground/Flight Test briefing and debriefings
    4. Participate in Test Readiness Reviews and ensure on-time Engineering deliverables.
    5. Generate developmental engineering drawings and instrumentation change requests as required.
    6. Monitor live flight data, typically via telemetry, during flight test on aircraft.
    7. Create and review Aircraft Restrictions
    8. Create and review Aircraft Troubleshootings
    9. Create, review and approve ground test procedures, flight test procedures and their corresponding test reports.
    10. Coordinate with suppliers to review technical data, certification requirements and troubleshoot any issues with supplies.
    11. Process, analyze, and draw conclusions from post flight data.
    12. Identify non-conformances, quality escapes, etc. to create rejection tags.
    13. Make assessments to ensure safety of flight determination.
    14. Document flight test design problems for long term fix.
    15. Generate and review appropriate limitations documentation.
    16. Write flight test results reports.

  2. Complete special projects and tasks assigned by Group Lead.

  • Level Requirements (Minimum):
    Education
     
  • Four (4) year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation). 
    • Other Engineering fields may be considered.

  • Experience
     
  • Four (4) years aerospace engineering experience in air systems, including experience in aircraft cabin temperature controls, low pressure cabin air distribution, avionics cooling, cabin pressurization, fire protection and anti-ice systems.



Knowledge/Skills/Abilities:
 
  • Strong knowledge of flight test operations and flight certification, including knowledge of aircraft cabin temperature controls, low pressure cabin air distribution, avionics cooling, cabin pressurization, fire protection and anti-ice systems.
  • Good leadership presence as well as people management skills: 
    • Future-oriented in thinking and operation.
    • Able to lead by example and live/work by company values.
    • Ability to successfully contribute to a positive and productive work environment.
    • Able to instill a sense of urgency in team members.
    • Able to be patient and objective in difficult situations with different types of people.

  • Strong skill set for: 
    • Professional mannerisms, appearance and actions (self-confident and committed to high ethics).
    • Strong follow-through, quick thinking and resourceful.
    • Ability to remain calm, cool and collected in stressful situations.
    • Strong sense of urgency to resolve the issue.

  • Strong organizational, time management and prioritization skills:
    • Able to multi-task, maintain focus on several different projects at one time and hit deadlines.
    • Able to be flexible with attention and priority.
    • Ability to work in a progressive, fast-paced environment (work well under pressure).

  • Strong analytical skills, with an ability to troubleshoot, problem-solve and effectively and efficiently make decisions.
  • Strong communication skills (oral, written, presentation) with both external and internal team.
    • Act as an active listener, seeking to understand and then to be understood, articulating clearly and confidently.
    • Uses people relationship and business management skills to make decisions on what and when to communicate with employees and customers.
    • Excels at communicating clearly and effectively verbally. Strong proficiency in writing summaries, documents, reports, and presentations.
    • Strong interpersonal skills, with the ability to build strong relationships at all levels. Ability to influence others as well as relate to individuals at all levels of the organization.
    • Good project management skills, including the ability to take ownership for accomplishing assigned tasks. Results-oriented planner and delegator who ensures that goals are met. Able to set priorities and keep to projected schedules.
    • Computer Skills: Comfortable and effective working in Microsoft Office. Intermediate Excel proficiency required. Able to quickly learn new software and systems. 
    • Proven track record of improving the efficiency of assigned processes or procedures.
       
       


 
Job Number: 1810087672
Job Location: Seattle, WA
Duration: 6 months
Input Date: 06/27/2018
Last Updated: 09/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mYpuAAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Interior Design Engineer

Description:
Seeking Interior Design Engineers for Wichita, KS for 12 month CONTRACT
Interior Design Engineers (Will Send Without Degree)
Candidate will be responsible for design, development and testing of aircraft interior commodities and their installations. This includes modeling/drafting of parts, assemblies, and installations using Catia V5/V6.

Interior commodities may include aircraft cabinets, seats, composite panels and air ducts, soft goods and special finishes.

Design assignments are executed under the direction of the Interior Engineering Supervisor with an emphasis on meeting and or exceeding customer requirements while maintaining the New Product Development schedule.

*****Catia V5 Experience required*****

Preferred: Experience with CATIA complex surface modeling
Preferred: Catia V6 and Enovia experience
Preferred: Experience with executive interior components and systems
Preferred: Experience with aircraft furniture and non-structural composite design
Preferred: ASME Y14.5 Geometric Dimensioning and Tolerancing (GD&T)
 
Job Number: PL Interior
Job Location: Wichita, KS
Rate: open
Per Diem: Possible
Overtime: possible
Duration: 12+ months
Start Date: 2 weeks
Input Date: 02/12/2019
Last Updated: 07/10/2019
Firm Name: ADVANCED TECHNOLOGY
Attention: Peggy Lundie
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Technical Writer

Description:
We are seeking multiple Aerospace Technical Writers for openings in Huntsville AL, West Lafayette IN, OR Shelton CT.

4 year degree and maintenance manual writing experience required.

Send a note to lleszek@butler.com to learn more!
 
Job Number: 57051
Job Location: Shelton, West Lafayette, Huntsville, CT, IN, AL
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12+ months
Start Date: ASAP
Input Date: 06/11/2019
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Tool Designer Catia (336)

Description:
*This is a full-time, 1 year contract position located in Fort Worth, TX*

We are seeking a skilled tool designer who will be creating fixtures, tooling and equipment. Candidate will develop test procedures and update existing technical manuals.



Daily duties will involve designing, developing and implementing industrial machinery and equipment taking into account accessibility, economy, mobility, and performance requirements. Will use CAD/CAM to design tools, [CATIA].

Required:
*9 years experience in aerospace tool design using CATIA.

*Experience with tools, dies, gauges, jigs, fixtures, prototype and experimental model production.

*Familiar with factors in tooling such as as accessibility, economy, mobility, and performance requirements.
*Experience in analyzing and interpreting engineering drawings and technical documents and formulating test procedures.
*Active Secret Clearance (and reinvestigated within last five years)

*Perdiem Split available for out of town candidates



Preferred:

*GD&T

*AS or 4 year degree
 
Job Number: 336
Job Location: Fort Worth, TX
Input Date: 02/28/2019
Last Updated: 03/21/2019
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Structures Design Lead

Description:
Aircraft Structures Design Lead who will be responsible for leading all structural design activities related to aircraft. Will report directly to the Structures Manager.

Duties will include, but are not limited to:
• Support building and lead our Aircraft Structural Design team.
• Strong knowledge and understanding of latest structural design, as well as manufacturing trends in the Aerospace industry.
• Analyze the applicability of new and emerging technologies and advanced techniques.
• Serve as the primary design focal between program, Tier 1 supplier and regulatory authorities.
• Provide technical leadership in design and development of the preliminary structures layout that meets weight, cost, manufacture-ability and certification requirements.
• Develop schedule, cost and supplier management milestones.
• Support new business development, trade studies and proposal activities.
• Support the structures team in development of the PSP, PSCP, issue papers, and other certification documents.
• Support technical review of supplier capabilities to facilitate source selection.

Requirements:
• Must be a US or Canadian citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772.
• Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure / confidentiality agreement with current or any former employer that would prevent you from fully performing the duties of the position.
• Must have a Bachelor’s Degree in Aerospace or Mechanical Engineering, or similarly related area. Master’s Degree strongly preferred.
• 12+ years of experience in performing design of large aerospace structures.
• 3+ years of leadership experience on an aircraft development program.
• Knowledge of the conceptual and preliminary design phases of aircraft development is strongly preferred.
• Thorough understanding of the structural design requirements for Part 25 certification.
• Must have demonstrated leadership capabilities.
• Demonstrated success in dealing and influencing internal and external stakeholders.
• Strategic thinker with very strong decision making and communication skills.
• Highly self-motivated with a strong bias for action, and excellent problem-solving skills across multi-disciplinary skill sets.

The Structures Company is an AA/EOE.
 
Job Number: 281
Job Location: Reno, NV
Rate: OPEN - DOE
Per Diem: Yes
Overtime: Possible
Duration: CONTRACT TO HIRE
Start Date: ASAP
Input Date: 04/09/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Systems Design Engineer

Description:
Description
Knowledge of air vehicle systems, systems integration, engineering design, the drawing release process and subsystems/component qualification
Develops and refines system level requirements for vehicle systems based on customer and implied requirements
Ability to evaluate flight test and component qualification data for verification and validation purposes and to identify further testing or development/re-design work
Reviews, updates, and compiles engineering definition of aircraft system components and assemblies based on records from the current prototype aircraft program
Supports review of manufacturing plans and procedures to ensure compliance with design requirements
Supports the creation of system test plans which will be used to verify the design intent meets requirements
Confers with management, engineering, and other staff regarding manufacturing capabilities, production schedules, and other considerations to facilitate production processes


Qualifications
B.S. degree in Mechanical, Aerospace, or similar discipline is required
8+ years of relevant industry experience; 10+ years is preferred
Experience with CATIA V5 strongly preferred, or SOLIDWORKS or equivalent
Experience in aircraft systems design, (mechanical, pneumatic, electrical) assembly and test processes
Experienced design (broad based aircraft experience) with knowledge of design manufacturing tolerances for production of components using GD&T
Experience with Product Lifecycle Management tools (PLM software), Requirements management tools and configuration management
Excellent verbal and written communication, excellent computer skills including Microsoft Word, Excel, and PowerPoint
Strong team player and ability to work independently with excellent organizational and problem-solving skills
Knowledge and experience with AS9100 a plus
Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, DO-160, military (MIL-STD-810) or NASA are highly desired
Experience with manufacturing based ERP systems a plus


The Structures Company is an AA/EOE.
 
Job Number: 266
Job Location: CA
Rate: $65-$70/Hr. **DOE**
Per Diem: Yes
Overtime: Yes
Duration: 9+ Months
Start Date: ASAP
Input Date: 03/22/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airframe Process Engineers (1st and 2nd shift)

Description:
The Airframe Process Engineer is required to complete tasks as related to AeroStructures in support of the Black Hawk Major Assembly build, tooling, liaison, and planning.

The candidate’s responsibilities will include supporting a Process Engineer Lead assigned to existing Black Hawk programs.

Primary responsibilities include Manufacturing Engineering support of Black Hawk build and designs by providing:
• producibility review,
• work instruction planning,
• developing tooling and manufacturing plans, and
• manufacturing implementation and support of airframe installation and modifications.

The candidate must:
• review, sign off, create, and implement PCAS for EC changes,
• issue SAP notifications to create new tooling, and
• perform process validations.
• pro-actively coordinate with Design Engineering and other disciplines and actively engage in continuous quality improvement through the use of other ACE tools.
• be flexible and highly motivated with a proven technical ability and business judgment with the ability to work on multiple programs.
• Have good communication skills
• Be flexible in regard to work schedule and willing to support weekends.

Requirements
• BS in Mechanical Engineering, Aerospace or Manufacturing Engineering
• Five (5+) years of Airframe Process Engineering
• Proficient in all processes associated with Airframe Process Engineering.
• Proficient in Solumina, Matrix, Microsoft Programs, CATIA, CADRA, and SAP
• 10% Travel Required
 
Job Number: 1910098240
Job Location: Bridgeport, CT
Per Diem: split
Overtime: possible
Duration: 1.25 years
Start Date: ASAP
Input Date: 03/22/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airframe Stress Engineer

Description:
Structural Design and Analysis Engineer - Airframe Stress
Location: Arlington, TX
12+ month contract

We are seeking an Airframe Stress Engineer for a contract in Arlington, TX. Our client is looking for the following skillset:
•Familiar with classical hand analysis
•Composite and metal experience
•5+ years’ experience
•Experience with drawing release support



____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 56087
Job Location: Arlington, TX
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12+ months
Start Date: ASAP
Input Date: 02/13/2019
Last Updated: 03/13/2019
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airframe Stress Lead

Description:
Airframe Stress Lead who will be responsible for all aspects of structural integrity and implementing long-term roadmap on stress methods development. Will report directly to the Structures Manager.

Duties will include, but are not limited to:
• Support building and lead team developing stress analysis methods and tools for aircraft design and certification.
• Develop road map for structures team - in partnership with Tier 1 suppliers and Partners - in the areas of analysis methods, tools and failure criterion for the entire aircraft.
• Support IPT leads in development of the PSP, PSCP, issue papers, and other certification documents.
• Provide input to maintenance program, inspection intervals and inspection methodologies.
• Support new business development, trade studies and proposal activities.
• Support design reviews with IPT teams and partners/suppliers.


Requirements:
• Must be a US or Canadian citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772.
• Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure / confidentiality agreement with current or any former employer that would prevent you from fully performing the duties of the position.
• Must have a Bachelor’s Degree in Aerospace or Mechanical Engineering, or similarly related area. Master’s Degree strongly preferred.
• 12+ years of experience in performing stress analysis, developing methods and performing validation testing for Part 25 aircraft components.
• 3+ years of experience in leading stress and/or structural integrity teams.
• Knowledge of the conceptual and preliminary design phases of aircraft development is strongly preferred.
• Thorough understanding of latest structural static, durability and damage tolerance requirements for Part 25 certification.
• Must have demonstrated leadership capabilities.
• Demonstrated success in dealing and influencing internal and external stakeholders.
• Strategic thinker with very strong decision making and communication skills.
• Highly self-motivated with a strong bias for action, and excellent problem-solving skills across multi-disciplinary skill sets.

The Structures Company is an AA/EOE.
 
Job Number: 282
Job Location: Reno, NV
Rate: OPEN - DOE
Per Diem: Yes
Overtime: Possible
Duration: CONTRACT TO HIRE
Start Date: ASAP
Input Date: 04/09/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Avionics Assistant Manager

Description:
Aerospace Engineering specialist. 
  • Aerospace engineering experience in Avionics, including experience working with avionic systems utilized in vehicle design (Comm/Nav/ Surveillance/ FMS/ Displays/ Recorders/ CAS/ antenna installations).
  • Bachelors Degree in Engineering, Mathematics, Physics or related Science (or equivalent combination of work and experience).
  • 5+ years of aerospace experience.
  • Familiar with CPDLC/ACARS and Experimental Flight Testing
  • Ability to think critically, identify and synthesize important information necessary to inform flight test.
  • Strong ability to analyze test data/results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations, etc.)
  • A team player with the ability to thrive in a fast-paced environment and work effectively with others across disciplines, functions and organizations.
  • Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
  • Ability to represent professionally and positively among MFC teams interactions and actively build rapport and trust.
  • Computer Skills: Comfortable and proficient working in Microsoft Office. Intermediate Excel proficiency required.
  • Management skill: Allocate task, control working time and work shift/rotation plan

Aerospace Engineering specialist 
  • Aerospace engineering experience in Avionics, including experience working with avionic systems utilized in vehicle design (Comm/Nav/ Surveillance/ FMS/ Displays/ Recorders/ CAS/ antenna installations).
  • Bachelors Degree in Engineering, Mathematics, Physics or related Science (or equivalent combination of work and experience).
  • 5+ years of aerospace experience.
  • Familiar with CPDLC/ACARS and Experimental Flight Testing
  • Ability to think critically, identify and synthesize important information necessary to inform flight test.
  • Strong ability to analyze test data/results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations, etc.)
  • A team player with the ability to thrive in a fast-paced environment and work effectively with others across disciplines, functions and organizations.
  • Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
  • Ability to represent professionally and positively among MFC teams interactions and actively build rapport and trust.
  • Computer Skills: Comfortable and proficient working in Microsoft Office. Intermediate Excel proficiency required.
  • Management skill: Allocate task, control working time and work shift/rotation plan

 
Job Number: 1810081415
Job Location: Moses Lake, WA
Duration: 24 months
Input Date: 02/09/2018
Last Updated: 09/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002dvoRAAQ&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Subsystem Lead Engineer

Description:
seeking an Avionics Subsystem Engineer with strong experience enabling him/her to be responsible for all activities related to the design, development, integration, testing and certification of the primary avionics, secondary avionics, pitot statics, navigation, synthetic vision, enhanced vision, communications, antennae, radar, data acquisition, safety systems, health monitoring & reporting and integrated modular avionics. The successful candidate will manage the various avionics systems design and system’s suppliers, as well as all design and certification activity required. The Avionics Subsystem Lead Engineer will work out of our Reno, NV, headquarters and report to the Director of Cockpit IPT.

Duties include, but are not limited to:
• Develop avionics systems design, architecture and product plan, including qualification and certification plans
• Provide subject matter expert level technical leadership, mentoring and guidance on both practical and theoretical aspects of avionics systems
• Define requirements for the avionics systems to ensure compliance with regulations and customer requirements
• Provide validation and verification of avionics systems requirements
• Perform avionics systems tests and certification, and provide system and certification documentation
• Interface directly with avionics systems suppliers
• Manage the avionics scheduling, budget and resources
• Report subsystem status to ensure milestones are met in support of the overall program schedule

Requirements:
• Must be either a US citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772 and ITAR 120.12
• Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure / confidentiality agreement with current or any former employer that would prevent you from fully performing the duties of the position
• Minimum of a Bachelor’s Degree in Aerospace, Electrical Engineering or other relevant Engineering position
• Master’s degree in a technical and/or management specialty preferred
• 10+ years of deep, hands-on experience in Avionics systems development, design and testing in Military, Commercial and/or business jet aircraft
• 3+ years of demonstrated experience leading technical resources and teams, both internally and externally, as well as both on-site and off-site
• In-depth and current knowledge of Part 25 regulatory requirements
• Experience and expertise in the development of commercial and/or high-end business jets strongly desired
• Recent experience in developing avionics systems from concept through certification strongly desired
 
Job Number: 42-005
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 07/15/2019
Last Updated: 07/15/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Systems Integration Engineer

Description:
Avionics Systems Integration Engineer to join our Avionics team. The scope of the avionics engineering team includes: flight avionics hardware; signal conditioning; data acquisition; actuator control; RF communication; wire harnesses; vehicle guidance, navigation, control; fault tolerance; ground-support electronics hardware and software; and integrated vehicle health monitoring. The ideal candidate will have at least 2 years of experience working with avionics and electrical systems in the aerospace or related fields. A college graduate with related project experience and a passion for aerospace will be considered. We are looking for a generalist who will contribute to several roles in a fast paced environment.

Your Mission
• Design, Integration, and testing of avionics and aircraft electrical systems
• Develop vehicle, system, and component requirements for design, procurement, and test
• Evaluate and select COTS avionics subsystems.
• Work with hardware engineers and subcontractors to define requirements and interfaces for custom avionics hardware
• Create vehicle level schematics
• Plan, execute, and report on vehicle ground and flight testing
• Troubleshoot vehicle systems using schematics, multi-meters, oscilloscopes, bus analyzers, etc.

What you bring
• Experience with digital communication protocols such as RS232, RS422, RS485, Ethernet, MIL-STD-1553, CAN
• Hands-on electrical and/or avionics experience with aerospace or related systems
• Strong understanding of electrical engineering fundamentals
• Printed circuit board design experience is a plus
• Experience with analog and digital circuit design is a plus
• Experience with PCB design, FPGA, microcontrollers, and real-time systems is a plus
• 2 or more years of relevant integration and testing experience in aerospace or similar field
• New college graduates with relevant course and project work will be considered
• Experience with embedded system hardware and software
• Strong troubleshooting, organizational, and written communication skills

The Structures Company is an AA/EOE.
 
Job Number: 277
Job Location: CA
Rate: OPEN - **DOE**
Per Diem: Yes
Duration: 9+ Months
Start Date: ASAP
Input Date: 03/06/2019
Last Updated: 03/18/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Cabinet Finisher II

Description:
PDS is seeking a Cabinet Finisher II  for an open position in Savannah, GA.

Under general supervision, prepares and applies finishes to aircraft furniture using aircraft specifications, designs and engineering drawings with a high level of safety, quality, detail and productivity. Assists team members with greater experience to enhance techniques supportive of quality workmanship. 

Principal Duties and Responsibilities: 

Essential Functions: 1. Works under general supervision to prepare furniture for finish and disassembly using blueprints, aircraft specifications and design/engineering drawings. 2. Performs high quality repairs to various finished surfaces in the shop and aboard aircraft. Cleans and polishes blemishes as needed to prepare the aircraft for delivery. Applies finish to furniture using spray equipment and other manual/mechanical methods. 3. Uses various types of sandpapers, polishes, adhesives, masking mediums, solvents, finish materials, hand tools and various power tools to disassemble and finish furniture. 4. Complies with all safety, 5S, and housekeeping policies. Uses personal protective equipment to protect aircraft interior (PTP). 5. Uses the material tracking system to create parts demand, track squawks and to sign-off work. 

Additional Functions: 1. Works with lead and higher skilled technicians to develop and implement process improvements that increase safety, reduce, cost, cycle time, and man-hours using Lean Six-Sigma and other process improvement techniques. 2. Performs other duties as required. 

Please contact our Altanta or Savannah offices:  Atlanta@pdstech.com Office: 877-272-0088 and SavannahBranch@pdstech.com Office: 912-480-4706
 

Education and Experience Requirements:

High school diploma/GED. Two (2) years experience in wood finishing. Experience in aerospace industry preferred. Basic knowledge of cabinet finishing processes and products.

 



Unique Skills:



Knowledge of Solumina preferred but not required.

Other Requirements: 1. Possess a working knowledge of inspection and process specifications. 2. The ability to read, write, speak, and understand the English language. 3. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. 4. Must be computer literate.


 
Job Number: 1810082578
Job Location: Savannah, GA
Duration: 6 months
Input Date: 04/25/2018
Last Updated: 09/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Rodney Kinlaw
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002e0N6AAI&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Catia Design Engineer Secret Cleared (461)

Description:
*This is full time, 6 month contract position located in Palmdale, CA*



We are hiring for an Aerospace Catia Design Engineer who will be designing subsystems for DoD vehicles. Systems may include avionics, fuel, hydraulics, power or environmental controls for advanced air vehicles. The candidate will be working with MIL-SPEC and MIL-STD specifications for the various subsystems involved in the vehicles.



On a daily basis, candidate will be creating drawings, schematics, wire lists and work instructions including selection of components, creation and or modification of system requirements, interface/supplier control drawings, performance specifications, system checkout procedures, statements of work, trade studies, and component/ground/flight test plans.

Required:

*With an AS Degree, 14-16 years experience designing and modelling using Catia for DoD components and applications including test, and validation of new and modified subsystem designs.

*With a BA Degree same as above but only with 11 years or more experience needed.

*Ability to read and create schematics, drawings and interpret work instructions.

*Experience with GD&T

*Active Secret Clearance (investigation in last 5 years)
 
Job Number: 461
Job Location: Palmdale, CA
Input Date: 02/28/2019
Last Updated: 03/21/2019
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

Composite Structural Design Engineer Openings

Description:
Design and configuration of composite primary aircraft structure.
Experience during preliminary/conceptual design phase required.
Support of subsystems integration and packaging into primary structure.
Strong knowledge and understanding of latest structural design, as well as manufacturing trends in the Aerospace industry.
Analyze the applicability of new and emerging technologies and advanced techniques.
Serve as a design focal between the program and Tier 1 suppliers.
Provide technical support in design and development of the preliminary structures layout that meets weight, cost, manufacture-ability and certification requirements.
Support new business development, trade studies and proposal activities.
Support technical review of supplier capabilities and progress.

Requirements:
Must be a US or Canadian citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772.
Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure / confidentiality agreement with current or any former employer that would prevent you from fully performing the duties of the position.
Must have a bachelor’s degree in Aerospace or Mechanical Engineering, or similarly related area.
8+ years of experience in performing design of large aerospace structures.
Strong composite structural design background.
Proficiency with CATIA V5 and Teamcenter PLM is preferred.
Knowledge of the conceptual and preliminary design phases of aircraft development is strongly preferred.
Thorough understanding of the structural design requirements for Part 25 certification is preferred.
Highly self-motivated with a strong bias for action, and excellent problem-solving skills across multi-disciplinary skill sets.

The Structures Company, LLC is an AA/EOE.
 
Job Location: Reno, NV
Rate: Open
Per Diem: Yes
Overtime: Possible
Duration: Long-term
Start Date: ASAP
Input Date: 07/17/2019
Last Updated: 09/21/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: chrissheets@thestructurescompany.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Drafter / NX / BS required CA

Description:
165260
Request number: 5912
Job title: Design Drafter
Number of openings: 1
Position location: Torrance - CA
Employment type: Contract
OT exempt: No
Shift: 1st Education Requirement: BS/BA
Driving on company time?: No
Maximum Hourly Pay Rate: 50
6 months +

Function:
Mechanical Design Engineer
This position is responsible for development of complex electrohydraulic, electromechanical, mechanical, hydro-mechanical and electro-pneumatic components and systems that will become the new products. The incumbent, a fully trained professional, plans and conducts efforts requiring judgment in the independent evaluation, selection, and substantial adaptation and modification of standard engineering techniques, procedures, and criteria. Typically, the Design Engineer devises new approaches for the problems encountered.

Essential job functions:
• Perform conceptual design, analysis, assembly/detail drawing creation in NX, and test planning for complex control hardware used on military aircraft
• Contribute to the development of new product requirements through consulting with customers and sales personnel
• Validate conceptual problem solutions through trade studies and by applying sound engineering principles
• Perform engineering calculations related to sizing, performance, tolerance and assembly
• Be a key contributor to the preparation of technical proposal, cost estimates, and program schedules
• Guide the evolution of conceptual design, technical project planning, detail design, and development testing throughout the program lifecycle
• Support programs with some travel (5-10%) and the participation in presentations to customers
• Represent Moog in a manner consistent with its leading-edge technical reputation
• Create reliable designs through a comprehensive experimental development test program
• Document designs, analyses, and test results with accurate and concise reports

Required skills:
• 6+ years of design and development engineering experience
• Proficient in current versions of NX/UG computer-aided design software
• Self-starter with strong analytical skills and a desire for constant improvement
• Good sense of three-dimensional spatial orientation and knowledge of mechanical hardware design
• Proficient in assembly/detail drawings, GD&T, and dimensional tolerance analysis
• Team-oriented, with the desire to participate in and contribute to a high functioning team


Education:
• Bachelor’s degree in Mechanical or Aerospace Engineering
 
Job Number: MB-5912
Job Location: Torrance, CA
Rate: 50/hr max
Per Diem: no
Duration: 6 months
Input Date: 06/27/2019
Last Updated: 07/08/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineers – Aircraft Structural Repairs – Permanent - Canada.

Description:
Design Engineers – Aircraft Structural Repairs – Permanent - Canada.

Candidates sought from the US and Canada ,or those with right to live and work in Canada.

Successful candidates will:

·Actively support our client’s design team to ensure customer expectations are met.
·Design generic repairs for aircraft metallic and composite structures.
·Design specific repairs for damages exceeding Aircraft Structural Repair Publication (ASRP) limitations.
·Support operators with technical support on repairability of their aircraft fleet.
·Perform investigation on in-service structural issues affecting reliability. dispatchability and repairability.
·Participate in the design and support of structural modifications.
·Represent Customer Support in internal and external committees.
·Participate in the continuous improvement initiatives of the Customer Support organization. 

Preferred Experience:

·You hold a Bachelors degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of five (5) years in the aerospace industry.
·You have detailed knowledge of CATIA V5 (preferably R19) and Enovia.
·You are comfortable in interrogating aircraft structure repairs.
·You have knowledge of MS Office software (Word, Excel, PowerPoint, etc).
·You have strong, written and spoken, communication skills in English and French.
·You are available for occasional travel on short notice.

Our Client offers good packages to successful candidates, who join them.

Please quote ref JO0000000225 on application.
 
Job Number: JO0000000225
Job Location: Canada
Rate: Negotiable
Start Date: 03/04/2019
Input Date: 04/26/2019
Firm Name: STRONGFIELD TECHNOLOGIES USA INC
Attention: Graham Bird
Address: 5000 BIRCH ST STE 3000
City, State: NEWPORT BEACH, CA 92660
Website: www.strongfield.com

Director, Training & Flight Operations

Description:
Legacy Engineering, a division of PDS Tech, is seeking candidates for Director, Training & Flight Operations, Customer Support Division for the Regional Jet Development Program. 
This position is located in Nagoya, Japan.  

In this role, you will be responsible for the development and delivery of Regional Jet Customer training, flight manuals and flight operations engineering support. 



  • Training services include the development of courseware, training devices, training manuals and delivery of initial and recurrent training for Pilots, Technical/Mechanics, Cabin Crews, Ground Servicing Crews, and Dispatchers within an airline. In addition, this person must manage the relationship and performance of CAE, the Company's selected training service provider. 
  • Development, verification/validation and certification of flight operations manuals
  • Flight Operations Engineering support to Company's customers


Responsibilities include establishing deliverable commitments, establishing work priorities, creating and managing the development process, creating the team and team structure, implementing governance and communication processes, and evaluating the performance of the group.


Work Location
The Primary Work Location will be Nagoya, Japan.  Travel to USA or other country will be required.

Scope of Work
Specific Training responsibilities include:

  • Overall management of the relationship with and performance of CAE, Company’s training services provider, ensuring training devices and services are high quality at market prices
  • Development and maintenance of training curriculum and courseware for pilots, technicians/mechanics, flight attendants, and flight planning engineers, and ground handling services
  • Development and maintenance of training documentation for each course offered
  • Ensure there are sufficient qualified training instructors located at training delivery sites for the life of the aircraft
  • Ensure training devices (e.g., Full Flight Simulators (FFS), Integrated Procedures Trainers (IPT), Virtual Maintenance Trainers (VMT), Computer Based Training (CBT), Door Trainer and Cabin Trainers) & training facilities meet training objectives and are certified (where applicable) by regulators
  • Obtain regulator certifications such as OSD, FSB, etc.
  • Commitment of training services (both proforma and for fee) to customers as part of the airplane sales process
  • Scheduling customer training at a location that minimizes customer travel costs, meets customer requirements for timing (schedule), and fits within the Company's Training Program strategy.

 
Specific Flight Operations Support responsibilities include:

  • Define the process interfaces with Flight Test organization, Pilot organization and Flight operation engineering organization. 
  • Development, verification/validation, maintenance and delivery of all technical and administrative documents in support of customer’s flight operations.
    • Airplane Flight Manual (AFM)
    • Flight Crew Operating Manual (FCOM)
    • Quick Reference Handbook (QRH)
    • Weight & Balance Manual (WBM)
    • Master Minimum Equipment List (MMEL)
    • Dispatch Deviation Guide (DDG)
    • Flight Crew Training Manual (FCTM)
    • Cabin Crew Operating Manual (CCOM)
    • Aircraft Characteristics for Airport Planning (AC)



  • Ensure documents meet industry standards for content and format by participating in and influencing industry standards board that define flight operations documentation requirements
  • Create airplane performance databases and may provide specialized training courses to customers to assist them in their understanding and use of the airplane and documents listed above.  Such courses may include:
    • Performance Engineers course
    • Weight & Balance course

  • Review and approve requests from airlines for non-normal operations such as flight with missing secondary structure
  • Respond to Flight Operations related Customer Service Requests.  Utilize the Safety Process for emergent Flight Operations related Safety issues.
  • Prepare and Release Flight Operations Bulletins.  MITAC must define both a Routine bulletin type as well as an Alert bulletin type to correspond to the Maintenance related Service Bulletins
  • Define a change process that addresses Flight Operations related changes that may impact the certification basis of the airplane (e.g. Airplane Flight Manual)

Expected Education/Experience and Skills:



  1. Qualified candidates must hold an engineering degree from an accredited Engineering School.
  2. Candidates must have worked in commercial aerospace for an Original Equipment Manufacturer (OEM), and have 5 or more years in managerial positions providing Training and/or Flight Operations management functions to commercial airline customers.
  3. Commercial pilots license preferred.
  4. Candidates must have skills and experience managing Partners and Suppliers.

 
Job Number: 1710068573
Job Location: Nagoya,
Duration: 36 months
Input Date: 09/21/2018
Last Updated: 09/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002JqSMAA0&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Document Management Architect

Description:
Document Management Architect

Windsor Locks, CT
$90.75/hr
6 month contract
First Shift
*MUST BE A U.S. CITIZEN*
*NO RELOCATION COMPENSATION / NO PER DIEM SPLIT*

Description:
UTAS utilizes Document Management tools in a global environment. Will need to support the current UTAS Communications and Collaboration collection of document management applications. Specify design and implement Document Management software and its integration with other applications. Participate in UTAS Collaboration Tools strategic projects. Select, blueprint, gather requirements, design, and roll out solutions to end users. Ensure our systems stay compliant with UTC policies, US and International laws. The Document Management Architect is also responsible for ensuring high levels of system availability through monitoring and in-depth testing. Execute IT projects that support UTC Aerospace Systems business objectives. The projects can include developing custom applications or implementing software solutions purchased from a third party Application Service Providers. Projects typically involve working with UTC divisions.

1. Build and configure Document Management environments.
2. Support and maintain existing installations of Documentum.
3. Perform configuration changes as needed on production environment which are submitted through Help Desk tickets and service requests.
4. Review and fix Documentum security as needed.
5. Ensure knowledge transfer of best practices.
6. Provide ongoing operation and maintenance activities including periodic software upgrades.
7. Ensure technical architecture designs are compatible with the department's current / future standards and are supportable.
8. Assess and cultivate long-term strategic goals for Documentum development in conjunction with end users, managers, clients, and other stakeholders.
9. Direct, organize, and lead projects in the implementation and use of Documentum software tools and systems.
10. Design, test, and document all modification of the Documentum environment.
11. Analyze user requirements and, based on findings, design functional specifications for Documentum.
12. Conduct job duties and responsibilities according to the organization’s business systems development methodology and/or its Systems Development Life Cycle (SDLC) methodology. Also, familiar with the Agile methodology.
13. Assist end-user training and training materials; provide technical support as necessary.
14. Troubleshoot tools, systems, and software; performance-tune these applications as necessary.
15. Remain abreast of trends in relevant software and technologies. As required, lead efforts to analyze and recommend solutions.

Experience/Skills:
1. Experience / knowledge the following technologies:
• Documentum 7.x, including DA, Webtop, xPlore, API/DQL queries
• D2 4.7 Development & Configuration, C2, and D2
• Support of Captiva 7.5 Modules and Customization
• Microsoft .NET Software Development
• Linux Server Administration
• C#, VB .NET
• Windows Server
• Microsoft SQL Server Basics
• Oracle Basics
2. Minimum of 7 - 10 years direct work experience.
3. Strong ability to install and configure a Documentum.
4. Strong understanding of Documentum: theories, principles, and practices.
5. Exceptional analytical, conceptual, and problem-solving abilities.
6. Strong understanding of the organization’s goals and objectives.
7. Strong written and oral communication skills.
8. Strong presentation and interpersonal skills.
9. Able to prioritize and execute tasks in a high-pressure environment.
10. Experience working in a team-oriented, collaborative environment.
11. Experience will be acceptable in lieu degree.
 
Job Number: 10309
Job Location: Windsor Locks, CT
Rate: 90.75
Per Diem: No
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 01/17/2019
Last Updated: 03/04/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ECS & Pneumatic Subsystems Engineer

Description:
Seeking an ECS & Pneumatic Subsystem Lead Engineer with strong experience enabling him/her to be responsible for all activities related to the design, development, integration, testing and certification of the Environmental Control System (ECS), Cabin Pressurization, Oxygen System, Anti-Ice System and Bleed Air Management for a supersonic business jet. The successful candidate will manage the ECS & Pneumatic systems design and system suppliers, as well as all design and certification activity required.

Duties include, but are not limited to:
• Develop ECS & Pneumatic systems design, architecture and product plans, including qualification and certification plans
• Provide subject matter expert level technical leadership, mentoring and guidance on both practical and theoretical aspects of ECS & Pneumatic systems
• Define requirements for the ECS & Pneumatic systems to ensure compliance with regulations and customer requirements
• Provide validation and verification of ECS & Pneumatic systems requirements
• Perform ECS & Pneumatic systems tests and certification, and provide system and certification documentation
• Manage the ECS & Pneumatic subsystem scheduling, budget, resources and suppliers
• Will be responsible for hiring, developing and leading talent to augment and seamlessly integrate with our world-class team and liaise effectively with our technical support partners.
• The selected candidate will help to define the product development strategy and lead a team of engineers and analysts in that effort.
• She/he will prioritize the allocation of the ECS & Pneumatic resources to meet the milestones of the program schedule, from concept through certification.

Minimum Requirements:
• Must be either a US citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772 and ITAR 120.12
• Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure/confidentiality agreement with current or former employer that would prevent you from performing the duties of the position.
• Minimum of a Bachelor’s Degree in Aerospace, Mechanical Engineering or other relevant Engineering position
• Master’s degree in a technical and/or management specialty preferred
• 10+ years of deep, hands-on experience in ECS systems development, design and testing in Military, Commercial and/or business jet aircraft
• 3+ years of demonstrated experience leading technical resources and teams, both internally and externally, as well as both on-site and off-site
• In-depth and current knowledge of Part 25 regulatory requirements
• Experience and expertise in the development of commercial and/or high-end business jets strongly desired
• Recent experience in developing ECS systems from concept through certification strongly desired
• Must be able to demonstrate a clear understanding, knowledge and ability to define requirements, generate architecture and achieve compliance
 
Job Number: 42-001
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: Possible
Duration: 1 year plus
Start Date: ASAP
Input Date: 07/15/2019
Last Updated: 07/22/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer III

Description:
Our client is looking for an Electrical Engineer 3 to work in Tulsa, Oklahoma! Apply today with your most recent resume and if you meet the qualifications a recruiter will be in contact with you!

The ideal candidate for this position will perform the following tasks:
* Design modifications for special mission aircraft. Such modifications typically include the design of electrical power distribution systems, developing electrical loads analysis, wiring diagrams and harness fab drawings.
* Utilize experience with cockpit avionics upgrades, navigation and communications systems and integration to meet FAA or Military flight safety standards.
* Analyze the impact to the host platform that the design changes cause and use this analysis during the design phase to ensure that the overall impact to airworthiness is minimized.
* Effectively communicate as part of a multi-disciplinary team working together to ensure that the aircraft systems contribute to the overall success of the program.
* Knowledge of the airworthiness process is a must and the ability to iterate design approaches with the cognizant airworthiness authorities is critical.

Mandatory Qualifications and Experience:
* 5-8 years BS in Aerospace Engineering, Mechanical Engineering or a related field or 3-6 years MS Degree in a related field or have 10 years relevant experience.
* Must be comfortable working with standard MS Office tools as well as have demonstrated experience on a Solid Modeling CAD system and Product Lifecycle Management system.
* Must be US Citizens and either have or be able to obtain and maintain a Secret level clearance.
* Must have good communication skills and be able to work any shift, weekends and overtime, as required.
* Travel, up to 15%, or as required.

Desired Qualifications and Experience:
* A working knowledge of FEA and experience with NX/TeamCenter is preferred

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 129788
Job Location: Tulsa, OK
Duration: 6 months
Start Date: 03/04/2019
Input Date: 02/18/2019
Last Updated: 03/19/2019
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Power Generation and Distribution Engineer

Description:
• Electrical Power Generation and Distribution Engineer will be responsible for developing the subsystems requirements, architectures, roadmaps, and overall development of the subsystem from concept through certification.
• The candidate must be a subject matter expert in the relevant subsystem and have a thorough technical understanding of development of the subsystem.
• The candidate will be knowledgeable of FAR 25 certification requirements for the subsystem and subsystem components.
• Electrical Power Generation and Distribution Engineer will be responsible for the design of the relevant subsystems of the AS2 supersonic business jet to meet market and certification requirements.
• The successful candidate will have a commanding and fundamental understanding of how to design, analyze, and certify the relevant subsystem and have expert level knowledge of system integration into the aircraft.
• The candidate should be regarded as the technical subject matter expert for the relevant subsystem.

Basic Qualifications:
• BS degree or higher in mechanical/aerospace engineering.
• Minimum of seven years senior level technical experience in Electrical Power Generation and Distribution design and certification required.
• Experience with design and certification of FAR 23 or FAR 25 subsystems required.
• Strong technical, interpersonal, communication, administrative, and presentation skills. Demonstrated leadership in solving technical challenges.
• Significant experience on aircraft design teams, from concept through certification, in a collaborative multi-discipline team environment.
 
Job Number: 42-007
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 01/03/2019
Last Updated: 03/18/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical harness/cable engineer

Description:
Seeking senior electrical harness/cable engineers. The candidate will mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers.

Other job responsibilities may include
• Provides guidance in the development of cable/wire harness detail and assembly designs.
• Provides guidance in the development of electrical product detail, assembly and installation designs.
• Provides direction used by multiple teams to analyze complex results and performs design reviews.
• Provides guidance in engineering design disposition on discrepancies. Defines processes, specifications and procedures that support the design and manufacture of electrical commodities.
• Provides direction used by multiple teams to develop complex statements of work, metrics, schedules and budgets.
• Directs the technical review of supplier capabilities to facilitate source selection.
• Directs the development of functional and physical design requirements to ensure complete integrated design architecture.
• Works under consultative mentorship

Education/experience:
BDegree and typical experience in engineering classification: Bachelor's 14 or more years' experience, Master's with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Active U.S. Security Clearance is A Plus
Previous experience in the defense or aerospace industry
Previous experience in Electrical Harness/Cable/Wire Design and Routing
 
Job Number: Harness_OK
Job Location: Oklahoma City,, OK
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6 mon
Start Date: ASAP
Input Date: 04/01/2019
Last Updated: 06/03/2019
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrophysics Engineer / Scientist 5

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Electrophysics Engineer / Scientist 5
(U.S. Citizenship Required*)
Huntington Beach, CA
2019-8131

Responsibilities:
• A Principal RF Communication Systems Engineer is needed for several Phantom Works programs.
• Travel up to 10% of the time

Qualification:
• Preferred – active Secret clearance.
• 20+ years of experience designing and implementing advanced wireless communication systems and waveforms.
• Deep understanding of the communications theory backed by relevant education and/or specialization training.
• Familiarity with detailed RF link budgeting including usage of modern link-budgeting tools and channel models.
• Experience designing, analyzing, prototyping and testing modern RF front-ends ranging from VHF to mmWave – including modern apertures, up/down conversion, filtering, amplification and signal conditioning.
• Demonstrated experience designing signal processing algorithms of modern communication waveforms including advanced signal processing techniques (eg, parasitic signal cancelation, MIMO processing, diversity combining).
• Mastery of signal processing development tools including MATLAB and Simulink.
• Hand-on system integration, prototyping, and troubleshooting skills – including lab and field activities.
• Familiar with the DoD system engineering processes, practices, product development and acquisition lifecycle.
• Proven successful proposal writing skills.
Preferred:
• Understands design specifics of modern military waveforms.
• Familiar with AJ, LPI/LPD and SIGINT aspects of the waveform design.
• Experience implementing waveforms on the modern hardware including FPGAs, DSPs, SoCs and RFoCs.
• Ability to prototype software using modern algorithmic and scripting languages (C, C++, Python).
• Familiarity with design principles of modern wireless datalink and networking layers.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's and 14+ years' experience, Master's with 12+ years' experience or PhD with 9+ years' experience.
• Degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-8131
Job Location: Huntington Beach, CA
Rate: Based on experience
Duration: 6 Months
Input Date: 03/01/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: jobs@moseleytechnical.com
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Employee Data Management Specialist 4

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Employee Data Management Specialist 4
(U.S. Citizenship Required*)
Renton, WA
2019-8139

Join our Human Resources Architecture Excellence Team is as an experienced Workday Business Systems Analysts (BSA) to support our Enterprise HR system management, features releases and change management processes. In this role, you will be responsible for designing, governing and delivering Workday and other HR application solutions that improve our HR function. You will collaborate closely with business leaders, HR subject matter experts, IT business partners, and IT delivery teams. In addition, you will work with stakeholders to gather, understand and document business requirements in order to develop solutions to meet business goals and to lead the management of system and SaaS functionality adoption toolkits, system roadmaps and release planning as well as testing and validation of requirements.

Responsibilities:
• Manage business systems and analyze HR systems including vendor SaaS systems, especially Workday
• Act as application (Workday or other) subject matter expert and deliver ongoing functional application support
• Collaborate with HR Organizations (Centers of Excellence), IT and other experts to translate business requirements into solutions.
• Identify alternatives, assess and evaluate new functionality and configure and validate HR applications using functional system configurations, business process configurations and other tools
• Conduct fit/gap analysis to find gaps and recommend alternatives
• Develop solution design and functional requirements documentation
• Facilitate review sessions with functional owners, subject matter experts and end users
• Work with HR & IT to design system interfaces with 3rd party vendors, ensuring consistent, accurate data flow
• Assist global HR systems projects and work closely with project team to track issues through to resolution
• Resolve requests and queries
• Work closely with project stakeholders to plan implementation of new functionality, discretionary projects and change requests
• Act as a liaison with HR, vendors and IT to ensure effective integration of Workday HCM with external HR solutions and other functional systems
• Work across a team of BSAs to catalog all Workday and other system adoption features to support end-user readiness activities.
• Evaluate/update plans based on new Workday release functionality.
• Build roadmap and project plans.
• Support training as required
• Assist developing and maintaining HR System Architecture standards
• Work with vendor, business and IT on managing system releases and prepare testing plans to confirm that system designs are optimal and validate and verify requirements
• Up to 10% travel

Qualification:
• Required – Real-world system support experience in Workday Human Capital Management
• Strong analytical and technical skills
• Ability and experience with facilitating and collaboratively participating in requirements gathering
• Proven ability to conduct comparative solution analyses, fit-gap analyses and employ other business system analysis methods and tools
• Excellent verbal and written communication and interpersonal collaboration skills
• Good project management, cross-functional team collaboration and vendor management skills
Preferred:
• Experience with ServiceNow
• Experience with Team Foundation Services (TFS)
• Strong functional knowledge of HR processes
• Experience working with SaaS vendors
• Business System Analysis certifications
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's degree and typically 10+ years’ related HR Systems work experience, a Master’s degree and typically 8+ years’ related work experience or an equivalent combination of education and experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-8139
Job Location: Renton, WA
Rate: Based on experience
Duration: 12 Months
Input Date: 03/01/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: jobs@moseleytechnical.com
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Designer IV

Description:
Location: Canoga Park, CA
Rate: $65.00 - $75.00/HR
Duration: 2 years contract
Shift: 9/80 Schedule (OT Possible)
Per Diem Split: Yes (if eligible)

**Candidates must be U.S. Citizens**
**Permanent residents are NOT eligible for this role**
**Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable**

** Candidates should have experience specifically with flight electronics packaging for space applications**
**Candidates should have design experience of electro-mechanical packaging or cable harnesses**

Duties:
- Candidates should have experience specifically with flight electronics packaging for space applications
- Candidates should have design experience of electro-mechanical packaging or cable harnesses
- Perform engineering design tasks related to space electronics based products.
- Duties include electronics packaging of complex space electronics, defining electrical-mechanical interface, capture design in CREO and to fully participation in team-development environment.
- Support the design and development of electronics hardware, working closely with Electrical Engineers, Printed Wiring Board (PWB) designers, electrical systems, manufacturing, thermal and stress analysts. Position will support various different Electric Propulsion programs

Skills:
- Proficiency in the use of CREO PDM/Link, Windchill and Pro/Cabling application.
- Proficiency in generating drawings is required.
- Familiarity with aerospace/defense engineering design and production processes and disciplines.
- Experience in Electronic Packaging Design, Drawing Generation, GD&T, Tolerance Stack-up analysis.
- Extensive experience in PRO-E/CREO CAD design are a must (NX CAD design preferred).
- Advanced oral and written communication skills expected which will be used to coordinate and collaborate with local Operations, as well as distant-located Engineering organizations and customers.
- Able to create, read and understand engineering drawings, electrical schematics and wiring diagrams.

Education:
- Requires a Bachelor's degree in Mechanical Engineering and 10 years of direct experience with packaging power electronics. Willing to accept experience in lieu of Bachelor's Degree.
 
Job Number: 10532
Job Location: Canoga Park, CA
Rate: $65.00 - $75.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 2 yr
Input Date: 03/05/2019
Last Updated: 03/19/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Technical Specialist 1

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Engineering Technical Specialist 1
(U.S. Citizenship Required*)
Tukwila, WA
2019-8143

Responsibilities:
• Provide basic assistance to support development, documentation, implementation and basic consultation on the application of engineering tools, processes and standards.
• Assists integrating engineering designs.
• Assist identifying and validating user access roles.
• Assist developing and implementing standards.
• Assist developing, maintaining, and distributing engineering documents, reports and correspondence to enable business activity.
• Collect engineering performance metrics and coordinate organizational requirements to support business needs.
• Work under close supervision.

Qualification:
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's degree.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-8143
Job Location: Tukwila, WA
Rate: Based on experience
Duration: 3 Months
Input Date: 03/01/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: jobs@moseleytechnical.com
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Entry Level Design Engineer, prefer Creo Experience (002)

Description:
This is a full time, 1 year contract located in York, PA*



We are recruiting for an entry level contract Mechanical Design Engineer who has fundamental knowledge of aerospace/DoD mechanical packaging design. In this position they will be using Pro/E Creo.



Much of the work may be in mechanical and parts design, preparing items for machining and fabrication, welding, and assembly. A good knowledge of manufacturing processes will be used daily on manufacturing site.



Required:

*Straight out of college or 2 years’ experience in military mechanical design
*Able to work with some electrical as well as mechanical parts

*Able to work with Excel and creating large spreadsheets.

*Experience creating and reading engineering drawings, schematics.

*Able to apply and gain a clearance after start.
*4 year engineering degree



Pluses:

*Familiar with Pro/E or Creo and GD&T (ASME 14.5-2009)

*Vehicle designing experience a plus
 
Job Number: 002
Job Location: York, PA
Input Date: 02/28/2019
Last Updated: 03/12/2019
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Designer III & IV - (Everett, WA)

Description:
Several openings in WA:

Leads the development of highly complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements. Leads design reviews, design requirement collection, drawing creation and revision. Researches the application of robotics, automation and new technology to support the build plan. Creates off-load packages, specifications, purchase requests and usage instructions for equipment and tooling. Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Establishes and validates spares requirements. Leads the implementation of best practices into functional process documentation to drive standard work. Oversees the development and documentation of equipment and tooling inspection and usage instructions, preventative maintenance plans, and user training. Provides technical direction to support engineering changes and discrepancy resolution. Oversees the maintenance of hardware and software configuration. Assesses and makes recommendations for disposition of equipment and tooling.

CATIA V5

Prefer an AA degree in related discipline and typically 6 or more years of related experience or an equivalent combination of education and experience.
 
Job Number: EquipTDEverett
Job Location: Everett, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 04/18/2019
Last Updated: 06/03/2019
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Designers/ Engineers // Everett, WA and SC- Both states

Description:
Equipment & Tool Designer 4

Location: Everett, WA
Duration: 6+ Months

Description:
Leads the development of highly complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements. Leads design reviews, design requirement collection, drawing creation and revision. Researches the application of robotics, automation and new technology to support the build plan. Creates off-load packages, specifications, purchase requests and usage instructions for equipment and tooling. Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Establishes and validates spares requirements. Leads the implementation of best practices into functional process documentation to drive standard work. Oversees the development and documentation of equipment and tooling inspection and usage instructions, preventative maintenance plans, and user training. Provides technical direction to support engineering changes and discrepancy resolution. Oversees the maintenance of hardware and software configuration. Assesses and makes recommendations for disposition of equipment and tooling.

Education / Experience:
AA degree in related discipline and typically 6 or more years of related experience or an equivalent combination of education and experience.

Skill Code: 66W-Tech Designer



Equipment & Tool Engineer 3, 4

Location: Everett, WA
Duration: 4+ months

Job Description:
Successful candidates will have substantial experience with automated equipment startup, integration & optimization. Particular focus on development of Machine Failure Modes & Effect Analysis, with the ability to interpret results and turn them into preventative maintenance plans and min/max spares. Also critical to the role is ability to apply root cause corrective action problem solving to new production equipment. Team members will be applying Operational Equipment Effectiveness (OEE) continuous improvement methods to drive production system improvements. Finally, the ability to translate technical details into front line training for machine operators and maintenance technicians is highly desirable. Successful candidates will be working in a dynamic environment with broad cross functional team members.
Develops program and project requirements, develops highly complex equipment and tooling concepts and designs solutions, including alternatives for the Production System. Validates analysis of technical data, influences product engineering design and makes robotics, automation or technical recommendations to support production system integration for a aerospace products. Leads the creation and modification of equipment and tooling definition at the program level. Executes project plans, provides input to Make/Buy decisions and partners with Procurement to meet program schedule, cost and quality targets. Ensures compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Leads gated reviews and develops plans for production readiness, preventative maintenance and spares. Validates contractual performance milestones. Develops and implements work-arounds and maintains configuration of hardware, software and documentation. Conducts studies and make recommendation for disposition of assets.

Education / Experience:
Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, master’s with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctor of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Skill Code:
66U-Designer Engineer
 
Job Location: Everett, WA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 months
Start Date: Asap
Input Date: 10/11/2018
Last Updated: 05/09/2019
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Designers/ Engineers-Multiple Locations

Description:
Equipment & Tool Designer 3, 4

Location: Everett, WA / North Charleston, SC/ New Orleans, LA/Berkeley, MO
Duration: 6+ Months

Description:
Leads the development of highly complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements. Leads design reviews, design requirement collection, drawing creation and revision. Researches the application of robotics, automation and new technology to support the build plan. Creates off-load packages, specifications, purchase requests and usage instructions for equipment and tooling. Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Establishes and validates spares requirements. Leads the implementation of best practices into functional process documentation to drive standard work. Oversees the development and documentation of equipment and tooling inspection and usage instructions, preventative maintenance plans, and user training. Provides technical direction to support engineering changes and discrepancy resolution. Oversees the maintenance of hardware and software configuration. Assesses and makes recommendations for disposition of equipment and tooling.

Education / Experience:
AA degree in related discipline and typically 6 or more years of related experience or an equivalent combination of education and experience.

Skill Code: 66W-Tech Designer

----------------------------------------------------------------

Equipment & Tool Engineer 3, 4

Location: Everett, WA
Duration: 4-6+ months

Job Description:
Successful candidates will have substantial experience with automated equipment startup, integration & optimization. Particular focus on development of Machine Failure Modes & Effect Analysis, with the ability to interpret results and turn them into preventative maintenance plans and min/max spares. Also critical to the role is ability to apply root cause corrective action problem solving to new production equipment. Team members will be applying Operational Equipment Effectiveness (OEE) continuous improvement methods to drive production system improvements. Finally, the ability to translate technical details into front line training for machine operators and maintenance technicians is highly desirable. Successful candidates will be working in a dynamic environment with broad cross functional team members.
Develops program and project requirements, develops highly complex equipment and tooling concepts and designs solutions, including alternatives for the Production System. Validates analysis of technical data, influences product engineering design and makes robotics, automation or technical recommendations to support production system integration for a aerospace products. Leads the creation and modification of equipment and tooling definition at the program level. Executes project plans, provides input to Make/Buy decisions and partners with Procurement to meet program schedule, cost and quality targets. Ensures compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Leads gated reviews and develops plans for production readiness, preventative maintenance and spares. Validates contractual performance milestones. Develops and implements work-arounds and maintains configuration of hardware, software and documentation. Conducts studies and make recommendation for disposition of assets.

Education / Experience:
Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, master’s with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctor of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Skill Code:
66U-Designer Engineer
 
Job Location: Everett, WA
Rate: Open
Per Diem: Split
Overtime: Yes
Duration: 4 months
Start Date: Asap
Input Date: 12/05/2018
Last Updated: 05/09/2019
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Engineer 2

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Equipment & Tool Engineer 2
(U.S. Citizenship Required*)
Sylmar, CA
2019-8133

Join our CAD & Tooling design team to work on various projects covering everything from large and small solar panels and arrays for a variety of space applications, to photolithography tooling used to fabricate the world’s most efficient space solar cells. You will directly contribute to development programs that will help shape our next-generation improvements in product, process and tooling design.

Responsibilities:
• Design solar panels, solar panel components, and associated support tooling in AutoCAD / Inventor Pro Suite.
• Design and update searchlight/gimbal systems and high intensity illumination products for solar cell and solar panel test in AutoCAD / Inventor Pro Suite.
• Work closely with Panel Product Engineers to translate customer schematics and specifications into manufacturing efficient panel layouts and detailed manufacturing drawings, including Bills of Materials (BOMs), detail views, wiring lists, schematics, and notes.
• Participate in round-table drawing reviews and CAD-check of drawings generated by others.
• Generate soft tooling files from AutoCAD model. Learn to generate and check photo-mask drawings.
• Work with Product and Process Engineers to identify and define the manufacturing support tooling necessary to safely build and test the hardware in conformance with customer requirements.
• Generate tooling procurement and assembly drawings and models using AutoCAD/Inventor Pro Suite.
• Work with Illuminations Systems Product Engineers to generate and update part & assembly documentation for procurement, manufacturing and assembly: generate 3D models, verify model tolerances, and manage models in VAULT.
• Apply GD&T principles to assure manufacturability for assemblies and to resolve procurement issues.
• Work with procurement team and suppliers to resolve tolerance, material selection, and process capability issues to proactively address cost & quality of parts for both Space Photovoltaic and Illuminations Product lines.
• Support proposal and design trade efforts by providing rapid assessment of potential layout options.
• Assess customer ICDs for manufacturability and provide feedback/improvement suggestions to enhance compliance and/or manufacturability.
• Participate in LEAN improvement initiatives from both manufacturing and engineering perspective.
• Continually advance ideas to streamline design/documentation and manufacturing processes by applying DFMAT principles to all generated and reviewed deliverable hardware & manufacturing/support tool designs.
• Use Finite Element Analysis to support new design development and Root Cause investigations.
• Use Inventor CFD tool to assess thermal and mechanical stress on deliverable hardware and to determine factors of safety for assembly/ground support tooling.
• Lead design trade studies, supplier capability assessments, and manufacturability improvement projects as needed based on project scope and resource availability.
• Assist Product Engineering in preparation of program SDRL documentation, including parts and material lists, mass analysis, magnetic moment analysis, and detailed design descriptions for review packages.
• Learn to perform radiation and power analyses, and to generate handling procedures & hardware test reports to backfill as needed during periods of high-volume activity.

Qualification:
• Flexible, able to support evening and weekend work on an as needed basis, and self-motivated.
• Adept at working in a fast-paced environment to complete scheduled milestones as planned.
• Proficient in 2D and 3D CAD modeling using AutoCAD/Inventor Pro Suite 11 (or higher), including:
o Use of block part libraries
o Generation of multilayer drawing packages, detailed assembly views, and schematics
o Familiarity with AutoDesk Vault
• Demonstrated working knowledge of basic GD&T principles
• Sound working knowledge of Finite Element Analysis techniques, preferably using Inventor Pro Suite Analysis (including definition of model, mesh, and boundary conditions and interpretation/presentation of results)
• Must be proficient in:
o reading/generating electrical schematics
o quickly generating AutoCAD/Inventor 2 and 3 D models using block part libraries
o use of multi-layer drawing structure
o generating assembly detail views
o use of GD&T principles for evaluating manufacturing tolerances and dimensional stack-ups
• Prior experience in
o PCB or other electronics packaging and wiring design
o Use of Autodesk VAULT
o Generating/running finite element analysis models for mechanical and/or thermal stress
o Designing tooling for precision manufacturing and / or large structure handling support
o Translating model information from 2D to 3D and vice versa, both within AutoCAD / Inventor Suite and from other CAD systems into AutoCAD/ Inventor
• Able to compile and present data using Excel and PowerPoint, and to generate/update procedural documentation using Word
• Strong foundation in mechanical engineering and/or material science are also key.
• Highly adaptable to meet changing priorities in support of manufacturing, engineering, and marketing needs.
• Good people skills; able to communicate effectively with diverse internal & external customers and colleagues.
• Continually looks for improvement opportunities for work habits/procedures.
• Willing to embrace change and learn new skill sets to optimize processes/procedures and address balancing workloads in a dynamic market environment.
• Able to lead trade studies or process improvement initiatives as needed per project scope/resource availability.
Preferred:
• Familiar with basic physics of solar cells, photolithographic processes, Aerospace materials and assembly techniques, PCBs and electronics, FEA and FMECA analysis techniques.
• Familiar with VBA, SQL, or Labview
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• AutoCAD/Inventor Pro Suite Certification and 4+ years’ relevant experience.
• Bachelors’ degree in Mechanical Engineering, Physics, Material Science or related field + at least 1 year of relevant real-world (non-school-related class or project) experience is preferred.
• Degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
o ABET is the preferred, although not required, accreditation standard.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-8133
Job Location: Sylmar, CA
Rate: Based on experience
Duration: 12 Months
Input Date: 03/01/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: jobs@Moseleytechnical.com
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FPGA / DSP Design Engineer w/ ASIC (584)

Description:
*These are full time, 1 year contract positions, located in Orlando*


We seek a hands-on ASIC FPGA/DSP Design Engineer to design electronic circuits. Will be responsible for component selection, evaluation, test box design, prototype creation and checkout along with digital and analog analysis. Engineer will design and develop evaluation boards and test methodologies/interface hardware required to evaluate the design through systems integration, test and final device design and customer approval.



Required:
*6+ years’ experience for level 3, conducting firmware digital design engineering using FPGA/DSP or 11 years experience for Level 4 job.
*Familiar with video system design, synchronization, image processing operations and display formats.
*Active Secret Clearance

*On site work only, no remote work possible for this position.
*BSEE



Pluses:
*Verilog, C/C++, MathLab/Simulink, System Verilog languages; Synopsis Synplify, Synopsis VCS, NCSim, ChipScope tool sets.
*Familiar with Xilinx, Altera Part family internal FPGA fabric and IP and model based compilers

*Aerospace design experience
 
Job Number: 584
Job Location: Orlando, FL
Input Date: 02/28/2019
Last Updated: 03/21/2019
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FPGA Engineer

Description:
Our client is looking for a FPGA Engineer to work in Orlando, Florida! Apply today with your most recent resume and if you meet the qualifications a recruiter will be in contact with you!

The ideal candidate for this position will perform the following tasks:
* Develops, designs, verifies, and documents Application-Specific Integrated Circuits (ASIC) and Field Programmable Gate Arrays (FPGA) development.
* Determines architecture design, logic design, and system simulation.
* Assignments include the analysis of all aspects from high-level design to synthesis, place and route, and timing and power utilization.
* Typically uses specialized equipment to establish operation data, conduct experimental tests, and evaluate results.
* Support Circuit card designer with trade studies.
* Develop and release design requirement specifications for product.

Mandatory Qualifications and Experience:
* Bachelor’s degree or higher in Electrical or Computer Engineering with a preferred concentration in FPGA design and Digital Signal Processing through relevant experience.
* Familiarity with video system design, synchronization, image processing operations and display formats.
* Must have a Secret security clearance with 5 year background re-investigation

Desired Qualifications and Experience:
* Experience with Verilog, C/C++, MathLab/Simulink, System Verilog languages; Synopsis Synplify, Synopsis VCS, NCSim, ChipScope tool sets desired.
* Experience with Xilinx and Altera Part family internal FPGA fabric and IP and model based compilers desired.
* FPGA design experience with tools noted above.
* Previous experience related to aerospace design techniques is desired

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 129767
Job Location: Orlando, FL
Duration: 1 year
Start Date: ASAP
Input Date: 03/04/2019
Last Updated: 03/19/2019
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Facilities Planner 4

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Facilities Planner 4
(U.S. Citizenship Required*)
Auburn, WA
2019-8152

Responsibilities:
• Lead and initiate forecasting efforts to identify use and occupancy allocation, building utilization and density, capital and expense budget items, to manage real property assets and allocate site cost.
• Lead/guide project team, manage budgets, develop integrated schedules, negotiate changes, anticipate and mitigate risks, track earned value, project progress and conduct status reviews, to manage complex, high value projects within schedule and budget.
• Anticipate milestones in pursuit of project goals.
• Gain consensus for the optimal solution, including budget approval, by effectively organizing and presenting proposals to stakeholders and sponsors (e.g., executive management).
• Communicate approved plan to implementation team.
• Anticipate and mitigate potential conflict situations.
• Prepare and maintain master site facility plans.
• Lead space management initiatives and or systems implementation.
• Coordinate, maintain, and update use and occupancy tracking system to identify cost and allocate space.
• Participate developing space management forecast.
• Train/guide less experienced planners.
• Participate in and lead teams by using improvement tools and techniques to enhance operational efficiency, product quality, service delivery, and asset utilization (e.g., lean office and manufacturing, new technology development, special requests, proposal support), gaining insight into the customer’s vision and organization.
• Lead or participate in enterprise wide, regional and/or site facilities studies and master plans to assist the business decision making process in response to Company and organization initiatives (e.g., asset utilization, production rate plans, business plans).
• Gather and analyze data regarding current conditions and future requirements.
• Interact with internal and external organizations, senior level management, and government agencies in order to identify and assess impacts to the business operating plan.
• Prepare business case analysis.
• Lead and/or create long and short-range tactical plans (e.g., site, office, manufacturing, lab, warehouse) by identifying and developing facilities options to satisfy multiple project objectives (e.g., cost, schedule, location, conceptual layout, process/people flow) by working with the stakeholders and assessing resources (e.g., assets, space, budget, labor) in order to create the best value for the customer and the company.
• Prepare risk analysis and impact statements.
• Provide technical guidance to others.

Qualification:
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's degree and typically 10+ years’ related work experience, a Master’s degree and typically 8+ years’ related work experience or an equivalent combination of education and experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-8152
Job Location: Auburn, WA
Rate: Based on experience
Duration: 10 Months
Input Date: 03/12/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: jobs@moseleytechnical.com
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Facilities Project Admin 4

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Facilities Project Admin 4
(U.S. Citizenship Required*)
Auburn, WA
2019-8140

Responsibilities:
• Direct and integrate high-impact facilities projects, including activities such as relocations, construction, utility shutdowns, budget management, schedule, and project reviews.
• Direct construction of contract strategy and approve contracts for high-impact projects.
• Receive customer requests for high-impact facilities projects, such as construction, rearrangements, moves, and asset acquisition, via various electronic methods.
o Validate against acceptance criteria for new requests and acknowledges customer requests.
o Assign priorities and log requests into work management system in order to document, track, and perform work.
o Evaluate requests and meet with customer to define requirements.
• Participate in contractor selection, contract change negotiations, constructability reviews, and cost/schedule visibility such as management, customer and contractor reviews to ensure compliance with standard operating procedures.
o Evaluate contractor proposals for fair and reasonable cost.
o Administer contractor activities.
• Obtain facilities design and resources commitments.
• Develop work package that can include budget/funding source, schedule, drawings, specifications, statement of work, procurement, estimates.
• Coordinate support functions with affected parties such as customer, designers, SHEA, crafts, Security, and network infrastructure to create an agreed to implementation plan and verify compliance with project documents.
• Assemble and release work package by collecting and integrating various individual documents such as facilities work order, contract service request, drawings, vendor quotes, schedule, permits. Finalized work package will provide documents to implement the project.
• Identify acceptable options with customer to clarify needs and develop the preliminary scope of work in order to meet the customer’s requirements.
• Create layouts and conceptual designs.
• Ensure compliance with company and regulatory standards such as city, county, state, federal.
• Develop options so that facilities modifications are accomplished within project objectives.
• Work with affected parties to define functionality and constructability.
• Develop conceptual, budgetary, and detailed cost estimates to assist in the business case analysis.
• Negotiate options with customer to select the best solution for customer and company.
• Direct and ensure completion and retention of records for high-impact projects by following the standard operating procedure for closure and update of appropriate documents, forms, permits, work management systems, commissioning and as-built drawings.
• Ensure comprehensive closeout and retention of project and contract files to provide an audit trail for Records Retention, Internal Audit, Internal Revenue Service, Property Accounting, Legal, and Facilities.
• Ensure project implementation meets established quality, cost, schedule targets and regulatory requirements.
• Oversee and lend technical expertise to less experienced employees.

Qualification:
• Required – successfully pass a credit check.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's degree and typically 10+ years’ related work experience, a Master’s degree and typically 8+ years’ related work experience or an equivalent combination of education and experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-8140
Job Location: Auburn, WA
Rate: Based on experience
Duration: 10 Months
Input Date: 03/01/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: jobs@moseleytechnical.com
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Flight Controls Engineer

Description:
PDS Tech is seeking a Flight Controls Engineer for an open position in Nagoya, Japan.

 
  •  
  • B.S. degree in Aerospace Engineering, Mechanical Engineering or related technical degree.
  • Applicable coursework or coop/intern experience to this position desired.
  • Working knowledge of generic CAD design tool processes is desired.
  • Experience with CATIA V6/Enovia – or ability to learn it quickly from V5
  • Experience with Kinematics in CATIA
  • Flight Controls Systems design experience a plus
  • Must have excellent verbal communication and presentation skills.
  • Proficient with Microsoft Office applications including Word and Excel.
  • Professional demeanor, troubleshooting and organizational skills are necessary.
  • International experience desirable. 
  • Must be able to stay in Japan a minimum of 3-5 years or until final certification.

 
Job Number: 1610045561
Job Location: Nagoya,
Duration: 36 months
Input Date: 08/09/2018
Last Updated: 09/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000003BKTAA2&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
We are seeking Flight Test Engineers to join us in Moses Lake, WA to support an exciting new aircraft project. The ideal candidate in this position will be involved in a range of airplane flight test operations including but not limited to:

Support engineering with test plan creation.
Discuss, write and review test cards and test hazard analysis
Support and/or lead test preparation activities, test execution, post-test activities
Support and/or lead pre and post flight briefings.
Monitor live flight data, either via telemetry or onboard flight test aircraft
Process, analyze, and draw conclusions from post flight data.
Make assessments to ensure safety of flight determination.
Document flight test design problems for long term fix.
Generate and review appropriate restrictions/ limitations documentation.
Update monitoring screens for specific testing and/or restriction monitoring.


Requirements


5+ years relevant work experience related to experimental flight test operations.
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
Strong ability to analyze results
Communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related.
 
Job Location: Moses Lake, WA
Per Diem: Possible
Overtime: Yes
Start Date: ASAP
Input Date: 03/07/2019
Last Updated: 04/23/2019
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

Flight Test Instrumentation Technician

Description:
Role Description
 
Summary
As part of a multicultural team, you will be responsible for manufacturing, assembling, and supporting testing of hardware for flight testing of aircraft. Working from engineering instructions, procedures and drawings with limited guidance, fabricate, install, check-out, calibrate, diagnose, and troubleshoot instrumentation data acquisition systems and sensors. This position will require planning, building and terminating various cable harnesses required in the instrumentation system and significant attention to detail to support safe testing.
 
 
Responsibilities
  • Assembly of components to aerospace standards working from blueprints, engineering orders, schematics, repair manuals and other technical documents
  • Termination and installation of wire harnesses and tubing
  • Work with engineers to review design concepts and provide feedback for ease of assembly
  • Review, edit and follow work instructions for installation tasks
  • Plan, communicate and execute installation steps for complex mechanical installations
  • Work safely in aircraft environment


Qualifications
  • Associates or 2 year technical degree along with a minimum of 1 year of flight test operations experience
  •  
  • A minimum of 5 years’ experience in flight test operations in lieu of the degree
  • Excellent demonstrated verbal and written communication skills
  • Ability to defuse and resolve conflict among other team members
  • Ability to use standard mechanical tools and fabrication shop equipment
  • Must be capable and comfortable working within a diverse team environment

 
Desired

  • A&P license or equivalent experience
  • Experience operating heavy lifting equipment such as cranes and forklifts
  • Experience with measurement tools
  • Familiarity with tube fabrication (bend, flare, fittings, etc.)
  • Ability to perform strain gage installations
  • Knowledge in the use of 3D CAD tools, and the ability to read mechanical drawings and electrical diagrams.

 
Job Number: 1810094286
Job Location: Moses Lake, WA
Duration: 12 months
Input Date: 10/16/2018
Last Updated: 09/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002qwKqQAI&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fuel Systems Engineer

Description:
• Responsible for developing the subsystems requirements, architectures, roadmaps, and overall development of the subsystem from concept through certification.
• The candidate must be a subject matter expert in the relevant subsystem and have a thorough technical understanding of development of the subsystem.
• The candidate will be knowledgeable of FAR 25 certification requirements for the subsystem and subsystem components.
• Fuel Systems Engineer will be responsible for the design of the relevant subsystems of the AS2 supersonic business jet to meet market and certification requirements.
• The successful candidate will have a commanding and fundamental understanding of how to design, analyze, and certify the relevant subsystem and have expert level knowledge of system integration into the aircraft.
• The candidate should be regarded as the technical subject matter expert for the relevant subsystem.

Basic Qualifications:
• BS degree or higher in mechanical/aerospace engineering.
• Minimum of seven years senior level technical experience in Fuel Systems design and certification required.
• Experience with design and certification of FAR 23 or FAR 25 subsystems required.
• Strong technical, interpersonal, communication, administrative, and presentation skills. Demonstrated leadership in solving technical challenges.
• Significant experience on aircraft design teams, from concept through certification, in a collaborative multi-discipline team environment.
 
Job Number: 42-008
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 07/15/2019
Last Updated: 07/22/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Grinder/Polisher

Description:
Job Description

Morson International currently has 6 vacancies for Grinders/polishers at a leading Aerospace manufacturer, this is an opportunity for Grinders/Polishers to work with an international Aerospace Manufacturer servicing some of the most prestigious names in the world in Aerospace.

Overview: Grinds/polishes material to correct thickness and polishes part per instructions.

Essential functions include the ability to:
1. Grinds/polishes material to correct thickness and polishes part per written/ verbal instructions.
2. Maintains work area and follows good housekeeping rules.
3. Follow all safety rules, policies and procedures.
4. Miscellaneous duties, as assigned.

Knowledge/Skills/Experience required: Must have a minimum of 2 years previous experience in sheet metal production and/or auto repair. Must have excellent hand/ eye coordination, be dependable, have complete of measuring equipment and have the ability to follow verbal/written instructions. Must have good basic math skills.

Must be able to interface with all employees and have the ability to take direction from others.

Physical Demands: Must have the ability to work a 5/40 work week, work overtime, if needed and maintain regular attendance. Physical demands also required:

Sitting Standing Walking
Fingering Reading Crouching
Pulling Pushing Grasping
Balance Seeing Hearing
Kneeling Repetitive Motion *Wearing
Lifting (30-40 lbs.) Climbing

*Wearing: All personal protective equipment including safety glasses, earplugs, gloves, and respirator.

Working Conditions: Warehouse environment. Noisy, cold in winter, hot in summer

Equipment Used: Measuring Equipment, Polishers, Buffers, Grinders
 
Job Location: Camarillo, CA
Rate: $20-25p/h
Duration: 3 months
Start Date: ASAP
Input Date: 06/21/2019
Firm Name: MORSON INTERNATIONAL
Attention: Stephanie Vu
Address: 10333 RICHMOND AVE STE 445
City, State: HOUSTON, TX 77042
Phone: 713/636-2777
Fax Phone: 713/636-2523
Website: www.morson.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Handling Qualities and Control Law Lead Engineer

Description:
Handling Qualities and Control Law Lead Engineer
Location: Fort Worth, TX (76118)
12-18 Months

Tasks/Requirements:
- Creating analytical and simulation models of the designs
- Aircraft Stability and Control Design and Analysis
- Conducting wind tunnel tests, reducing data, and incorporating results into simulation math model
- Developing aircraft Control Laws and integrating these into flight simulation programs
- Linear and non-linear analysis of flight control systems
- Analyzing the aircraft handling qualities and comparing results to aircraft requirements and specifications
- Conducting aircraft flight tests of model and full-scale designs
- Interface with other functions and management on the program

Familiarity with the following is preferred:
· Wind tunnel testing
. 6 degree of freedom simulation models
. Model-based systems engineering
· MathWorks MATLAB / Simulink with Stateflow and Embedded Coder
· ADS-33 and other Handling Qualities specifications
. Aircraft Parameter Identification
. Control Law Optimization
· Aircraft flight test
· Experience with Enovia, DOORS, and Serena Dimensions
· Flight control system development and testing in a systems integration lab
· 14 CFR Part 27 and Part 29 for commercial rotorcraft certification



____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 54731
Job Location: Fort Worth, TX
Rate: Negotiable
Per Diem: Possible
Overtime: Possible
Duration: 12+ months
Start Date: ASAP
Input Date: 01/04/2019
Last Updated: 03/13/2019
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

Hydraulic Systems Specialist

Description:
PDS Tech is seeking a Hydraulic Systems Specialist for the Flight Control System Design Group, Regional Jet Development Project.

This position is located in Nagoya, Japan.  You may be requested to relocate to Seattle or Moses Lake (Washington State, USA) where aircraft flight testing is performed. It may also be requested to travel to systems supplier sites to manage the Hydraulics Gear technical contract.

SUMMARY of Responsibility
* Leading the development and finalization of the airplane’s design, being compliant to all applicable requirements,
* Responsible for leading activities of the Hydraulics System. This will include interfacing with all other aircraft functions and engineering teams to coordinate and obtain the approval of any task assigned contributing to the aircraft Landing Gear System,
* Work as a team member in a multi-cultural and international working environment in Japan Headquarters. Japanese Language skill is not required.
 
Responsibilities include but are not limited to:
(1) Develop and finalize the company’s airplane’s design, compliant to all applicable Landing Gear Structural and Mechanical System Requirements,
This activity includes;
(a) Evaluate the current aircraft design, with respect to compliance to the Landing Gear related airworthiness regulations of JCAB, FAA and EASA,
(b) Coordinate integration of design change activities originated from Landing Gear requirements when required,
(c) Present and Discuss the Hydraulic System compliance with the Transport Authorities,
(d) Lead verification and showing-compliance activities, such as Ground and Flight Tests, Design Reviews, Inspections, Analysis, etc.,
(2) Initiate/review related documents, technical calculation, interface discussion with the team members and all the other stakeholders including systems, structures, manufacturing, customer support, and partners.
(3) Manage the technical contract requirements with applicable Hydraulic System suppliers and other interfacing suppliers as appropriate,
(4) Provide expertize to assist in resolving the Hydraulic System performance during any rig testing or Flight testing,
 (5) Performs other duties as may be assigned.
 


Educational Requirements:
* BS Degree in Engineering; Mechanical or Aerospace/Avionics preferred  
Professional Requirements:
* 4 years of testing experience in Environmental or Mechanical (i.e., hydraulic, flow, static load, and dynamic/shock/vibration)
* Experience with developing project time estimates, costing and quoting
* Design/Fabrication experience with test setups
* Landing Gear Structural and Mechanical design experience is preferred
* A strong working knowledge of Military, Aerospace, Telecom, and Commercial Specifications is highly desired.
Other Requirements:
* Must have excellent written and verbal communication skills in English
* Knowledge of customer service principles, techniques, systems and standards
* Needs the ability to develop, plan and implement short and long term goal.
* Ability to foster a cooperative work environment
 
Job Number: 1710076138
Job Location: Nagoya,
Duration: 12 months
Input Date: 04/06/2018
Last Updated: 09/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000023MntAAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer(Aerospace)

Description:
Applies Industrial Engineering concepts, techniques, analysis and decision tools under general supervision to promote and assist in implementing changes in manufacturing, engineering and service operations. Assists in developing models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provides summary analysis and metrics for consultation to customers (e.g., management, departments, suppliers).
Applies general industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements.
Assist in research, design, development, improvement and implementation of processes to enhance schedule performance, lower cost, and improve quality, through the application of Lean and other Industrial Engineering concepts for large scale systems integration and asset utilization.
Under general supervision, manages, defines, negotiates, and controls the scope, cost, and timing of projects, and performs risk analysis using project management tools (e.g., work break-down structure, precedence network, resource allocation).
Provides support to project completion.
Utilizes engineering methods (e.g., mathematical models, simulation, statistics) to support the development of optimal process designs and efficient utilization of resources (e.g., facilities, personnel, materials, equipment) in the creation and validation of products.
Under general direction, analyzes and designs value stream, including capability, capacity (e.g., make/buy, supplier selection, risk analysis, supplier performance), throughput, work flow and logistics (e.g., critical path, lead-time, transportation, factory layout).
 
Job Number: IEDEC2018
Job Location: Everett, WA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6 mon
Start Date: ASAP
Input Date: 03/25/2019
Last Updated: 06/03/2019
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Interior Test Director

Description:
Currently looking for an experienced aerospace engineering/certification manager to fill a role with a company in Seattle, WA. Interested candidates should have significant flight test experience as well as engineering/project management experience.

Responsibilities of the Interior Test Director
Provide engineering / certification service for static load test for Interiors, include : review test plan, coordination with partner to revise the test plan, recommended approval of test plan for JCAB, Test witness, trouble shooting if the case of test failure, review test report, recommended approval of test report, direct coordination with JCAB to obtain test plan/test report approval.
Provide Engineering Certification Support as requested for all related document for stress analysis and/or strength substantiation.
Act as Liaison to resolve all engineering / certification issues between all involved partners.
Fulfill the role of hours when requested to support the program, after being appointed by the Group Leader or Head of Seattle Engineering Office, while complying with internal standards and regulations.
To engage in such other projects and activities that the Company may request from time to time related to QT/TC.


Requirements
5 Years of flight test experience preferable in the Interiors Discipline.
Engineering management experience, and possible liaison experience.
Working location will cary from office or on-site as required, including partner's facilities.
Must be flexible to travel to domestic and some international locations, including Japan.
Have a positive attitude, be proactive, and communicative. Be willing to learn, appreciate, and blend into Japanese business culture.
Willingness to work long hours when requested to support the program.
 
Job Location: Seattle, WA
Per Diem: Possible
Overtime: Yes
Start Date: ASAP
Input Date: 03/07/2019
Last Updated: 04/23/2019
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Jr Thermal Engineer

Description:
Major responsibility will be in the area of fluid and thermal analysis of vehicle subsystems and components subject to operational loads under diverse environments. Candidates must be fully competent in the area of Computational Fluid Dynamics and Heat Transfer modeling and analysis using Star-CCM+ (preferred), ANSYS Fluent, or ANSYS CFX. Electromagnetic simulation experience using ANSYS HFFS is a plus.
Previous experience in system level cooling analysis is also highly desirable.
Excellent oral and written communication skills.
BS degree in Mechanical, Aerospace, or Chemical Engineering is required, MS preferred.
Up to 5 years of experience.
Candidates should have good working and theoretical knowledge of Computational Fluid Dynamics (CFD) analysis and be able to work effectively in a team environment.
Previous automotive, marine, and electronics packaging experience is desirable.
Programing experience in C, C++, Java, and Fortran is desirable.

REQUIRED SKILLS:
Previous experience with CFD analysis tools

PREFERRED SKILLS:
Past experience with Star-CCM+, Fluent, and HFSS

REQUIRED EXPERIENCE:
BS and 3 years or MS and 1 year

REQUIRED EDUCATION:
Engineering Degree

PREFERRED EDUCATION:
Master of Science in Engineering
 
Job Number: 47941
Job Location: San Jose, Ca
Duration: 12 months
Start Date: ASAP
Input Date: 03/08/2019
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Rick Nussbaum
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Landing Gear Engineer

Description:
• Landing Gear Engineer will be responsible for developing the subsystems requirements, architectures, roadmaps, and overall development of the subsystem from concept through certification.
• The candidate must be a subject matter expert in the relevant subsystem and have a thorough technical understanding of development of the subsystem.
• The candidate will be knowledgeable of FAR 25 certification requirements for the subsystem and subsystem components.
• Landing Gear Engineer will be responsible for the design of the relevant subsystems of the AS2 supersonic business jet to meet market and certification requirements.
• The successful candidate will have a commanding and fundamental understanding of how to design, analyze, and certify the relevant subsystem and have expert level knowledge of system integration into the aircraft.
• The candidate should be regarded as the technical subject matter expert for the relevant subsystem.

Basic Qualifications:
• BS degree or higher in mechanical/aerospace engineering.
• Minimum of seven years senior level technical experience in Landing Gear design and certification required.
• Experience with design and certification of FAR 23 or FAR 25 subsystems required.
• Strong technical, interpersonal, communication, administrative, and presentation skills. Demonstrated leadership in solving technical challenges.
• Significant experience on aircraft design teams, from concept through certification, in a collaborative multi-discipline team environment.
 
Job Number: 42-009
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 01/03/2019
Last Updated: 03/18/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Engineer

Description:
Seeking an experienced, highly motivated Material Review Board (MRB) Engineer. The primary task of this person will be to review manufacturing non-conformances and establish appropriate dispositions for these parts and assemblies. Competency in first order design and analysis principles is a must. Ability to utilize CATIA V5 is desired. Experience with various composite material systems is desired.

Qualifications:
• Knowledge of air vehicle systems, systems integration, engineering design, the drawing release process, and subsystems/component qualification
• Working knowledge and experience integrating various mechanical systems into a composite aircraft.
• Familiarity with composite fabrication processes
• Review and provide engineering technical disposition of non-conformance notifications related to metallic and composite parts/assemblies
• Skilled in “equivalent strength” principles
• Participation in product Corrective Action Board (CAR) reviews


Requirements
• B.S. degree in Mechanical, Aerospace, or similar engineering discipline is required
• At least 5 years of relevant industry experience
• Experience with CATIA V5 strongly preferred. SOLIDWORKS or equivalent will be considered in lieu of CATIA.
• Experienced design (broad based aircraft experience) with knowledge of design manufacturing tolerances for production of components using GD&T
• Experience with Product Lifecycle Management tools (PLM software), Requirements management tools and configuration management
• Excellent verbal and written communication, excellent computer skills including Microsoft Word, Excel, PowerPoint, and Matlab
• Knowledge and experience with AS9100 a plus
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, DO-160, military (MIL-STD-810) or NASA are highly desired
• Experience with manufacturing based ERP systems a plus
• Strong team player and ability to work independently with excellent organizational and problem-solving skills
• Composite and metal design experience preferred
• Understanding of MRB requirements & procedures
• Extensive working knowledge of engineering drawings / requirements
• NDT/Visual non-conformance disposition expertise
• Experience with control & segregation requirements for non-conforming material
• Familiarization with records accuracy & completeness (including data codes)
• Ability to facilitate inadequate cause & corrective action resolutions
• Familiarization with rework vs accept disposition risk assessments
• Familiarization with final dispositions & re-submit codes
• Experience should include creation of engineering dispositions for non-conformances for pressurized and non
• pressurized metallic and non-metallic structures (fuselage, wing, empennage)
• Experience should be in a production and/or schedule-driven environment
• Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment
• Strong written/verbal communication and interpersonal skills
• Typically a 9-10 hour work day, with some scheduled weekend support required

The Structures Company is an AA/EOE.
 
Job Number: 263
Job Location: CA
Rate: Up to $65/Hr. **DOE**
Per Diem: Yes
Duration: 9+ Months
Start Date: ASAP
Input Date: 03/18/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Engineer

Description:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services

Unique Skills
• Bachelor’s Degree in aerospace or mechanical engineering.
• Minimum 10 years dedicated structures MRB Engineering experience at a recognized airframe manufacturer
• Experience should include creation of engineering dispositions for non-conformances for pressurized and non-pressurized metallic and non-metallic structures (fuselage, wing, and empennage).
• Experience should be in a Production and/or schedule-driven environment.
• Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
• Strong written/verbal communication and interpersonal skills.
• Must be computer literate (such as Catia V5, SmarTeam, Word, Excel)

Experience/Education
• Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 10 yrs in the specific technical discipline or 15 yrs broad engineering experience in several technical disciplines with Bachelors, or 8 yrs in the specific technical discipline with Masters, or 6 yrs in the specific technical discipline with PhD.
 
Job Number: 24-320
Job Location: Savannah, GA
Rate: $64 - $68
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 02/01/2019
Last Updated: 03/18/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

MRB Engineer (9 positions left, Tulsa, OK)

Description:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Experience/Education
• Bachelor’s degree in aerospace or mechanical engineering.

Unique skills/Experience
• Minimum 7 years dedicated structures MRB Engineering experience at a recognized aerospace manufacturer.
• Experience should include creation and justification of engineering dispositions for nonconformances of composite and metallic, pressurized and non-pressurized aircraft structures.
• Composite experience should include fiberglass, carbon/epoxy, laminate/sandwich assemblies.
• Familiarity with results of composite NDI/NDT methods required.
• Experience should be in a Production and/or schedule-driven environment.
• Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
• Strong written/verbal communication and interpersonal skills.
• Must be computer literate (such as, but not limited to: Catia V5, SAP, Solumina, Smarteam, Word, Excel)
• Typically a 40 hr work week, with some week/weekend OT a possibility.

Essential Functions
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Acts as liaison with representatives outside of the assigned group/area

aircraft aerospace
 
Job Number: 24-303
Job Location: Tulsa, OK
Rate: $64-$67
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 08/23/2019
Last Updated: 09/16/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer 2

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Manufacturing Engineer 2
(U.S. Citizenship Required*)
Heath, OH
2019-8202

Responsibilities:
• Review Engineering Bills of Material and create proposal BOMs, review proposals, generate plans, coordinate Engineering requests.
• Assist developing and implementing production and tooling methodologies.
• Participate as a member of an Integrated Product Team (IPT) in the integration of technical solutions.
• Work with others to develop, identify and implement conceptual designs and maintenance of the program architecture for build.
• Assist implementing manufacturing plans.

Qualification:
• Skill/experience in Bills of Materials
• Skill/experience in interpreting schematics, assembly drawings, and technical manuals
• Skill/experience in writing proposals and reports
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's degree and typically 2+ years' experience in an engineering classification or a Master's degree with experience in an engineering classification.
• Degree from ABET accredited course of study, in engineering, etc.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-8202
Job Location: Heath, OH
Rate: Based on experience
Duration: 6 Months
Input Date: 03/12/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: jobs@Moseleytechnical.com
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer Sr / Bachelors Degree required GA

Description:
164136
7801 Manufacturing Engineer Sr
Dublin GA
45/hr max

POSITION SUMMARY
Ensures maximum cost effectiveness and reliability of manufacturing processes and workflow. Determines the methods and sequences of manufacturing operations for moderately complex products and machine parts and assemblies; ensures that products and processes meet customer quality requirements. Provides productibility input and manufacturing plans for product design or modification.


ESSENTIAL FUNCTIONS
1. Evaluates moderately complex manufacturing processes by conducting process analysis, applying knowledge of product design, fabrication, assembly, tooling, and materials, conferring with suppliers, and soliciting observations from operators/production technicians.

2. Develops moderately complex manufacturing processes by studying product requirements; researching, designing, modifying, and testing manufacturing methods and equipment; and conferring with equipment suppliers. Prepares written and graphical work instructions for the communication of manufacturing requirements to production personnel.

3. Refines and enhances products and processes by applying continuous improvement and key lean manufacturing/production principles and techniques to areas of production. May be assigned to special projects for a variety of products and processes.

4. Improves manufacturing efficiency by analyzing and planning workflow, space requirements, and equipment layout. Assures process control and reliability for assigned areas. Coordinates input and recommendations, and implements changes that may cross multiple teams or areas.

5. Assures product and process quality by designing testing methods, testing finished product and process capabilities, and establishing standards to confirm and validate manufacturing process requirements. Determines root cause of failure using statistical methods (e.g. design of experiment, statistical process control) that may result in changes in design, tolerances, or processing methods.

6. Provides manufacturing decision-making information by calculating production, labor standards, and material costs, reviewing production schedules, and estimating future requirements. May serve as liaison to supplier base.

7. Prepares product and process reports by collecting, analyzing, and summarizing information and trends. Presents findings and underlying rationale to team, supplier, or customer.

8. May maintain product and process database by writing computer programs, travelers, operation sheets, and entering data.

9. Maintains professional and technical knowledge by attending educational workshops, reviewing professional publications, establishing industry networks, benchmarking state-of-the-art practices, and/or participating in professional associations.

10. Complies with federal, state, and local legal requirements (e.g. environmental, safety, etc.) by studying existing and new legislation, ensuring adherence to requirements, and advising management on needed actions.

11. Shares specialized knowledge with others. Represents company on specific projects. Mentors new employees. Contributes to team effort by accomplishing related results as needed. Work assignments may include cross-functional (e.g. quality, design, or test engineering) or project team responsibilities.

Job Requirements: QUALIFICATIONS
Education and Experience
Bachelors degree (BS) in Manufacturing Engineering or related engineering field. Demonstrated ability to perform the essential functions of the job typically acquired through two or more years of related experience. Society of Manufacturing Engineering (SME) or Mechanical Engineering (ASME) certification desired.


Knowledge, Skills and Abilities

Knowledge of manufacturing and production engineering principles, concepts and general business operations. General knowledge of aerospace or similar industry products and legal and regulatory requirements related to manufacturing plants. Ability to effectively apply continuous improvement methods to quality and manufacturing functions (e.g. pull systems, process mapping, JIT). Ability to use standard business applications software and/or specialized data analysis tools. Ability to work effectively with CAD/CAM systems or other computer aided manufacturing systems. Ability to work on a variety of technical problems of moderate scope and complexity where analysis of the situation or data requires thorough identification of factors and analysis of impact. Ability to work within general work objectives regarding projects and team goals. Ability to read, analyze, and interpret engineering drawings, technical manuals and policies and recommend changes to procedures. Ability to effectively communicate and present information to team members, team leaders, and top management. Ability to respond to significant inquiries or complaints from customers, regulatory agencies, or members of the business community. Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to effectively demonstrate team member competencies and participate in goal-setting, performance feedback, and self-development activities.

TYPICAL MENTAL AND PHYSICAL DEMANDS

While performing the duties of this job, the employee is required to sit. The employee frequently is required to use hands to operate a computer and is required to talk or hear. The employee is occasionally required to stand and walk. Specific vision abilities required by this job include close vision. Also expected of the employee is regular attendance, the ability to work cooperatively and professionally with others and members of the public, and the ability to manage multiple tasks at once. The employee may be required to travel to vendors or customers including overnight trips.
 
Job Number: JK-7801
Job Location: Dublin, GA
Rate: 45/hr max
Per Diem: no
Duration: 12 months
Input Date: 03/25/2019
Last Updated: 04/01/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer Sr / Bachelors Degree required GA

Description:
164136
Manufacturing Engineer Sr

POSITION SUMMARY
Ensures maximum cost effectiveness and reliability of manufacturing processes and workflow. Determines the methods and sequences of manufacturing operations for moderately complex products and machine parts and assemblies; ensures that products and processes meet customer quality requirements. Provides productibility input and manufacturing plans for product design or modification.


ESSENTIAL FUNCTIONS
1. Evaluates moderately complex manufacturing processes by conducting process analysis, applying knowledge of product design, fabrication, assembly, tooling, and materials, conferring with suppliers, and soliciting observations from operators/production technicians.

2. Develops moderately complex manufacturing processes by studying product requirements; researching, designing, modifying, and testing manufacturing methods and equipment; and conferring with equipment suppliers. Prepares written and graphical work instructions for the communication of manufacturing requirements to production personnel.

3. Refines and enhances products and processes by applying continuous improvement and key lean manufacturing/production principles and techniques to areas of production. May be assigned to special projects for a variety of products and processes.

4. Improves manufacturing efficiency by analyzing and planning workflow, space requirements, and equipment layout. Assures process control and reliability for assigned areas. Coordinates input and recommendations, and implements changes that may cross multiple teams or areas.

5. Assures product and process quality by designing testing methods, testing finished product and process capabilities, and establishing standards to confirm and validate manufacturing process requirements. Determines root cause of failure using statistical methods (e.g. design of experiment, statistical process control) that may result in changes in design, tolerances, or processing methods.

6. Provides manufacturing decision-making information by calculating production, labor standards, and material costs, reviewing production schedules, and estimating future requirements. May serve as liaison to supplier base.

7. Prepares product and process reports by collecting, analyzing, and summarizing information and trends. Presents findings and underlying rationale to team, supplier, or customer.

8. May maintain product and process database by writing computer programs, travelers, operation sheets, and entering data.

9. Maintains professional and technical knowledge by attending educational workshops, reviewing professional publications, establishing industry networks, benchmarking state-of-the-art practices, and/or participating in professional associations.

10. Complies with federal, state, and local legal requirements (e.g. environmental, safety, etc.) by studying existing and new legislation, ensuring adherence to requirements, and advising management on needed actions.

11. Shares specialized knowledge with others. Represents company on specific projects. Mentors new employees. Contributes to team effort by accomplishing related results as needed. Work assignments may include cross-functional (e.g. quality, design, or test engineering) or project team responsibilities.

Job Requirements: QUALIFICATIONS
Education and Experience
MUST have a Bachelors degree (BS) in Manufacturing Engineering or related engineering field. Demonstrated ability to perform the essential functions of the job typically acquired through two or more years of related experience. Society of Manufacturing Engineering (SME) or Mechanical Engineering (ASME) certification desired.


Knowledge, Skills and Abilities

Knowledge of manufacturing and production engineering principles, concepts and general business operations. General knowledge of aerospace or similar industry products and legal and regulatory requirements related to manufacturing plants. Ability to effectively apply continuous improvement methods to quality and manufacturing functions (e.g. pull systems, process mapping, JIT). Ability to use standard business applications software and/or specialized data analysis tools. Ability to work effectively with CAD/CAM systems or other computer aided manufacturing systems. Ability to work on a variety of technical problems of moderate scope and complexity where analysis of the situation or data requires thorough identification of factors and analysis of impact. Ability to work within general work objectives regarding projects and team goals. Ability to read, analyze, and interpret engineering drawings, technical manuals and policies and recommend changes to procedures. Ability to effectively communicate and present information to team members, team leaders, and top management. Ability to respond to significant inquiries or complaints from customers, regulatory agencies, or members of the business community. Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to effectively demonstrate team member competencies and participate in goal-setting, performance feedback, and self-development activities.

TYPICAL MENTAL AND PHYSICAL DEMANDS

While performing the duties of this job, the employee is required to sit. The employee frequently is required to use hands to operate a computer and is required to talk or hear. The employee is occasionally required to stand and walk. Specific vision abilities required by this job include close vision. Also expected of the employee is regular attendance, the ability to work cooperatively and professionally with others and members of the public, and the ability to manage multiple tasks at once. The employee may be required to travel to vendors or customers including overnight trips.
 
Job Number: JK-8105
Job Location: Dublin, GA
Rate: 45/hr max
Per Diem: no
Duration: 12 months
Input Date: 03/28/2019
Last Updated: 04/01/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Technology Analyst 2

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Manufacturing Technology Analyst 2
(U.S. Citizenship Required*)
Oklahoma City, OK
2019-8136

Responsibilities:
• Gather and support evaluation of technical data for specific projects requiring manufacturing engineering practices.
• Participate or manage projects using approved project management techniques.
• Initiate changes to supporting processes and related documentation.
• Provide low-level training on procedures and processes related to engineering and production.
• Assist in the development of production proposal activities.
• Provide technical and administrative assistance to meet regulatory, production and process requirements.
• Communicate with internal stakeholders to ensure products and services compliance.
• Works under general supervision.

Qualification:
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's degree and typically 3+ years’ related work experience, a Master’s degree and typically 1+ years’ related work experience or an equivalent combination of education and experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-8136
Job Location: Oklahoma City, OK
Rate: Based on experience
Duration: 12 Months
Input Date: 03/01/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: jobs@moseleytechnical.com
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mass Properties

Description:
Minimum 5 years aircraft mass properties experience in product development environment. Strong weight control skills including influencing, accounting, reporting, measuring, risk and opportunity identification for structure and systems. Proficient in weight calculation from engineering drawings and catia v4/v5 models. Experienced in database maintenance. Familiarity with Gulfstream products and design processes desired. Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job. Job Description • Perform mass properties analysis for production aircraft or production aircraft modified for Special Mission applications. • Update a mass properties accounting database with detail part weight, center of gravity, and inertias. • Perform actual weight and balance measurement of detail parts, assemblies and full aircraft. • Prepare aircraft weight & balance documentation for flight and delivery (W&B Handbook, empty weight, W&B for flight, equipment list) • Track and status structural or system weight versus target weights. • Promote weight reduction opportunities to the responsible structural designers, system designers or stress engineers. • Provide and report to management on Aircraft Weight and Balance status • Coordinate activities to insure weight targets/goals are met What you'll bring to the team: • Apply your education as an Aeronautical, Aerospace, Electrical, Systems, or Mechanical engineer to provide quality mass properties analysis. • Apply people skills to provide optimum lightweight design concepts while working with design team. • Experience with CATIA and SmarTeam is preferred.
 
Job Number: 19-143213
Job Location: Southeast
Rate: $65.00 per hour
Per Diem: Split
Overtime: Possible
Duration: Possible Year
Start Date: 2 Weeks upon confirmation
Input Date: 03/05/2019
Last Updated: 03/19/2019
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mass Properties Engineer

Description:
Location: Savannah, GA
Rate: $65.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
- Minimum 5 years aircraft mass properties experience in product development environment.
- Strong weight control skills including influencing, accounting, reporting, measuring, risk and opportunity identification for structure and systems.
- Proficient in weight calculation from engineering drawings and Catia v4/v5 models.
- Experienced in database maintenance.
- Familiarity with Gulfstream products and design processes desired.

Education:
- Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
- See Other Requirements in Job Description.
- 5 years in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
- Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Job Description:
- Perform mass properties analysis for production aircraft or production aircraft modified for Special Mission applications.
- Update a mass properties accounting database with detail part weight, center of gravity, and inertias.
- Perform actual weight and balance measurement of detail parts, assemblies and full aircraft.
- Prepare aircraft weight & balance documentation for flight and delivery (W&B Handbook, empty weight, W&B for flight, equipment list)
- Track and status structural or system weight versus target weights.
- Promote weight reduction opportunities to the responsible structural designers, system designers or stress engineers.
- Provide and report to management on Aircraft Weight and Balance status
- Coordinate activities to insure weight targets/goals are met

What you'll bring to the team:
- Apply your education as an Aeronautical, Aerospace, Electrical, Systems, or Mechanical engineer to provide quality mass properties analysis.
- Apply people skills to provide optimum lightweight design concepts while working with design team.
- Experience with CATIA and SmarTeam is preferred.
 
Job Number: 10462
Job Location: Savannah, GA
Rate: $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 03/19/2019
Last Updated: 04/19/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Material Handler I

Description:
Chipton-Ross is seeking a Material Handler I for an opening in Redmond, WA.

RESPONSIBILITIES:
25% - Records information regarding materials received and shipped in the department computer system.
10% - Perform cycle counting activities (performing counts/recounts, researching lost items, completing cycle count records).
20% - Packaging and handling materials within company guidelines.
10% - Counting and/or weighing incoming parts to verify receipt.
25% - Performing picking/kitting activities 10% - Separating and moving materials, equipment and supplies to and from stores, warehouses, person, department, station and manufacturing areas.

REQUIRED EXPERIENCE:
1 year of related experience
Experience operating forklift, pallet jacks, and standard material handling equipment Experience with MS Office, Excel, outlook and using computer ERP/MRP system Ability to operate a 14ft box truck with lift gate A valid Washington State Driver's License Ability to move up to 50 lbs
BOX TRUCK
ERP
EXCEL
FORKLIFT
MATERIAL HANDLER
Additional Skills:
MATERIAL HANDLING
MATERIAL HANDLING EQUIPMENT
MRP
MS OFFICE
OUTLOOK
AEROSPACE
CONVEYOR
ENTERPRISE RESOURCE PLANNING
ESD
KITTING
MICROSOFT EXCEL
MICROSOFT OFFICE
MICROSOFT OUTLOOK
ORACLE
PACKAGING
SHIPPING

PREFERRED EXPERIENCE:
Experience handling ESD sensitive electronic parts Oracle ERP system Strong computer skills Experience handling explosives/energetics Excellent verbal and written communications skills Shipping/transportation experience Experience working in a regulated environment or previous aerospace experience

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
9/80 , 6:00am to 3:30pm Shift
Full-Time

 
Job Number: 170803
Job Location: Redmond, WA
Rate: $DOE
Duration: 12 Months
Input Date: 05/07/2018
Last Updated: 09/21/2019
Firm Name: CHIPTON ROSS
Attention: Cody Reposa
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: creposa@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Materials and Processes Engineer

Description:
• Build and Lead all parts of Materials and Processes organization for the aircraft development.
• Lead development of the material and process specifications through collaboration with OEM, suppliers and vendors to guide program in selecting appropriate materials by drawing from civil, military and/or industry standards.
• Strong knowledge of aerospace composites and metallic materials, advanced manufacturing processes, test methods and design allowable development.
• Knowledge of aircraft flammability and structural bonding requirements for Part 25 certification.
• Provide advice on the applications, properties and processing of advanced material systems to all stakeholders - including, but not limited to, stress, design, customer support, quality and procurement.
• Perform trade studies, write proposals and support new business development plans.

Requirements:
• Must be either a US citizen, a US permanent resident (a “US Person”) or a Canadian citizen.
• Minimum Bachelor’s Degree in Engineering. Master’s Degree strongly preferred.
• 15+ years of hands-on experience in advanced materials and processes qualifications, testing, manufacturing and certification of Part 25 aircraft
• 5+ years of experience leading technical resources and team.
• In-depth and current knowledge of Part 25 regulatory requirements.
• Demonstrated success in dealing and influencing internal and external stakeholders.
• Experience in engineering support of aircraft production line activities is desirable.
 
Job Number: 42-014
Job Location: Reno, NV
Rate: DOE but very competitive
Per Diem: YES
Overtime: YES
Duration: 1 year+
Start Date: ASAP
Input Date: 07/15/2019
Last Updated: 07/22/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Seeking a Mechanical Design Engineer who would like to learn and contribute to the Design Process. This person needs to be interested in a permanent position in the Mechanical Design department in Space and Sea Systems.

The candidate will support engineering activities associated with the analysis, design, and structural testing of thermal control and environmental life support components and assemblies for various aerospace applications including the NASA’s Space Suit, NASA’s Crew Exploration Vehicle, NASA’s International Space Station as well other aerospace and satellite platforms. This is both an individual contributor and mentorship level position.

The candidate will:
• Deliver against the cost, schedule and technical requirements of the program as defined by the Chief Engineer or IPT leadership in accordance with Standard Work. Deliverables include ensuring execution of Peer and Design reviews, analyses, Validation activities, Verification activities, design documentation (drawings, reports), task cost and schedule performance, etc.
• Develop and implement mechanical design best practices, processes and procedures within the Standard Work framework.
• Implement and support Standard Work processes across all programs to deliver consistent results.
• Work collaboratively with Engineering, Programs, Operations, Quality and Supply Chain to achieve optimal design solutions.
• Participate in the proposal process to develop and review cost estimates and proposal packages where mechanical engineering resources are required
• The candidate must be a US person:

Education / Certifications
• BSME or AE minimum, MSME preferred

Experience/Qualifications
• Knowledgeable in 3-D CAD modeling fundamentals, stress and fatigue analysis, machine design, and material selection.
• Prior experience in Aerospace Structures and Engineering Fluid Component Design.
• Knowledge of drawings, geometric tolerancing, and drawing interpretation.
• Experience with Manufacturing techniques for limited production hardware.
• Ability to work within a matrix organization to achieve team and program goals.
• Competence in use of Simulate, NASTRAN, ANSYS stress analysis packages desired
• A positive 'can do' attitude, good presentation skills, respect for others, confidence, and patience.
• Seven (7) to fourteen (14) years’ experience desired.

Industry Experience:
• Previous experience in Aerospace Component Design desired

Optional:
• Pro-E/CREO/Simulate preferred.
 
Job Number: 1910096941
Job Location: Windsor Locks, CT
Overtime: possible
Duration: 12 months
Start Date: ASAP
Input Date: 05/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Location: Windsor Locks, CT
Rate: $48.25/HR
Duration: 1 year contract
Per Diem Split: No

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****

Job Description:
- Manages teams and multiple projects in research, design, and development of mechanical applications to the planning, design, development, and testing of mechanical and/or electromechanical systems, instruments, controls, engines, and ground test / mechanical tests.
- Additionally responsible for the CAD support of design projects and execution of Engineering design changes.
- The Mechanical Design engineer will be responsible for Mechanical Engineering activities associated with the design, development, and qualification testing of thermal control and environmental life support components and assemblies for various aerospace applications including NASA’s Crew Exploration Vehicle, NASA’s International Space Station as well other aerospace and satellite platforms.
-This is an individual contributor level position.

Requirements:
- 8-15 years’ experience desired.
- Bachelor's Degree required.
- Knowledgeable in Pro-E/CREO modeling fundamentals, stress and fatigue analysis, machine design, and material selection.
- Previous experience in aerospace structures and engineering fluid component design required.
- Competence in use of NASTRAN, ANSYS, or simulate stress analysis packages desired.
- Knowledge of drawings, geometric tolerancing, and drawing interpretation.
- Experience with manufacturing techniques for limited production hardware.
- Ability to work within a matrix organization to achieve team and program goals.
- The successful candidate will possess a positive 'can do' attitude, good presentation skills, respect for others, confidence, and patience.
 
Job Number: 10278
Job Location: Windsor Locks, CT
Rate: $48.25/HR
Per Diem: No
Duration: 1 yr
Input Date: 03/19/2019
Last Updated: 06/25/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Designer

Description:
Location: Phoenix, AZ
Rate: $39.00/HR
Duration: 6 month contract
Per Diem Split: No

****MUST be a U.S. Citizen or Permanent Resident****
**** Candidate must be experienced with Teamcenter and NX modeling software and have aerospace packaging experience****

Job Description:
- Mechanical Designer/MCAD Drafter with emphasis on aerospace electronics packaging.
- Activities will include mechanical conceptual layout, detailed design, and engineering documentation.
- Will interface with other engineering groups to insure design requirements are fulfilled.
- The position may involve direct interface with customers (internal and external) and suppliers in support of developing an understanding of the mechanical design constraints.
- The position will work with cross functional teams to resolve issues.

Responsibilities may include:
- Manages highly complex drafting and design of assembly drawings based on layouts, sketches and blueprints.
- May include utilization of computer aided design applications.
- New product development from concept through production.
- Generate detailed solid models and engineering drawings.
- Processing documents through document change system.

Qualifications
- Minimum 8 years mechanical design experience required.
- H.S. Diploma required.
- Related technical degree a plus.
- Minimum 8 years solid modeling experience.
- Siemens NX11 a plus.
- Experience with Siemens Teamcenter PLM Software.
- Strong knowledge of GD&T ASME Y14.5.
- A background working on avionics design related experience a plus.
- Strong knowledge of manufacturing processes.
- Familiarity with DO-160 and DO-254 development guidelines a plus.
- Applicant should be highly motivated, with demonstrated leadership and communication skills.
- Close attention to detail required.
- Must be a US citizen or permanent resident.
- Good organization and planning skills required.
- Critical competencies: Customer Focus, Drive for results, Technical skills, Interpersonal savvy, Commitment to Continuous Improvement, Effective Teamwork.
 
Job Number: 10407
Job Location: Phoenix, AZ
Rate: $39.00/HR
Per Diem: No
Duration: 6 mos
Input Date: 02/05/2019
Last Updated: 03/04/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Designer / Engineer - Creo/Catia Secret Cleared (063)

Description:
*This is a full time, 1 year contract, located in Orlando*
*Must have an Active Secret Clearance in order to apply (this requires US Citizenship)*



We are seeking a Design Engineer who has experience in designing mechanical or machined parts used in aerospace vehicle production. packaging design, layouts, packing schemes and datalink design.



Daily duties will include verifying engineering drawings and related documents for soundness, efficiency, and simplicity in design; completeness, clarity, and dimensional accuracy; correctness of materials and processes; conformity to design/drafting standards, design specifications, and practicability; and economy of fabrication, assembly, and installation. Packaging design, layouts, modelling, packaging,
materials analysis, ability to create Interface Control Drawings (ICDs), Instructional Engineering Releases (IER), materials analysis, trade studies, as well as hardware integration and testing.



Required:
*5-10 years’ RECENT designing/drafting experience using Creo 2/3 or Catia V5.
*Experience in creation and reading of documentation of drawings and BOMs
*Knowledge of ASME Y14.5M-1994 Geometric Dimensioning & Tolerancing (GD&T)
*ASME Y14.24M Engineering drawings and general drafting experience practices of IAW ASME Y14.100.
*Occasional travel to manufacturing sites in Ocala, FL or Troy, AL
*Active Secret Clearance
*AS Degree with 10+ years’ experience or 5+ year with a BSME.



Preferred:
*Experience with Windchill



Benefits
*5 Medical plan options and dental plan available
*Per diem split is available for out of the area applicants
 
Job Number: 063
Job Location: Orlando, FL
Input Date: 02/28/2019
Last Updated: 03/21/2019
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
Mechanical Engineer


Location: Cary, NC

12+ month contract






Description:

MANDATORY QUALIFICATIONS:
•B.S. in Mechanical Engineering or related discipline with 5-10 years of Design, Analysis, or Test Engineering experience
•Experience in Solid modeling. Autodesk Inventor preferred.
•Strong technical aptitude, analytical, and problem-solving capabilities.
•Excellent interpersonal and communication skills, both verbal and written
•Technical writing experience with clear and concise report and coordination memo writing.
•Ability to work in a cross functional team environment

PREFERRED REQUIREMENTS
•Understanding of good design principles and GD&T.
•Drafting experience including 3D modeling and drawing creation.
•Structural analysis (hand calculations & FEA) experience
•Ability to review and implement customer requirements
•Excellent time management and negotiation skills.
•Ability to manage multiple assignments.
•Ability to translate customer requirements into viable technical and commercial solutions.
•Ability to understand and apply theory to complex problems and use engineering judgement.






DESCRIPTION OF WORK/PROJECT:

The clients Electromechanical Product Development group is seeking a highly motivated individual to work with the team on the design, testing, and implementation of aerospace systems. Specifically the team is looking to support the development of products from initial concept, through prototyping, until final flight-testing. A strong design background is required to successfully develop a product from concept to production in a profitable manner. The position will require collaboration with our global engineering and manufacturing teams to execute the product development process.


















____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 56102
Job Location: Cary, NC
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12+ months
Start Date: ASAP
Input Date: 02/08/2019
Last Updated: 03/13/2019
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

Mechanical Engineer - QA Manufacturing

Description:
Job Description:
Senior Quality Engineering position with experience in aerospace, military and/or commercial-based quality systems. Able to develop, evaluate and improve quality assurance processes compliant to aerospace industry standards and expectations. Articulate in the presentation of aerospace hardware and systems problems to technical professionals to initiate resolutions. Knowledge of discrepant material procedures (i.e., nonconformance reporting) Material Review Board (MRB), and corrective action is highly desirable. This position works independently as well as part of a team. Must be able to read engineering documentation and inspect to drawings, parts lists, inspection plans, and supplemental instructions. Candidate should be fluent in use of Microsoft applications and ability to learn new computer programs/applications.

Education:
Bachelor of Science in Engineering field is required.
 
Job Number: 598742010
Job Location: CO,UT, AZ, MA
Rate: Hourly/PD/OT
Per Diem: yes
Overtime: possible
Start Date: 2 weeks
Input Date: 02/15/2019
Last Updated: 09/20/2019
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic Avellino
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: davellino@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer – RS3

Description:
Our client designs, builds, and launches rockets that carry people and satellites into space to support its customers’ tracking, communication, and exploration goals. Over its 100 years in existence, our client has built not just rockets but trust, partnering with both commercial and government customers to achieve critical missions. Build on your own achievements; apply to work with our client as:

Mechanical Engineer – RS3
(U.S. Citizenship or Green Card Required*)
Decatur, AL
2019-8197

Responsibilities:
• Stress analysis to support drawing release and analysis of Atlas and Delta products and non conformance analysis and disposition.
• Classical stress analysis, FEM modeling and analysis using FEMAP and NX NASTRAN. Documentation of analysis.
• The strength analysis will include finite element analysis and hand calculations of components, small assemblies, and large assemblies. Finite element analysis will use NASTRAN/FEMAP.

Qualification:
• Familiarity with non-linear analysis and material plasticity using NASTRAN and ABAQUS.
• Knowledge of superelements will aid in efficient non-linear analysis.
*U.S. Citizenship or Green Card is required by law, regulation, executive order, or government contract.

Education and Experience:
• Requires a bachelor’s degree and 4 -8 years of experience

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-8197
Job Location: Decatur, AL
Rate: Based on experience
Duration: 6 Months
Input Date: 03/12/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: jobs@moseleytechnical.com
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Design & Analysis Engineer 3

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Mechanical Systems Design & Analysis Engineer 3
(U.S. Citizenship Required*)
Kennedy Space Center, FL
2019- 8191

Join our team as an experienced Mechanical/Structural Engineer to support multiple engineering subsystems on the Commercial Crew Transport System. This position leads the development and maintenance of engineering product definition.

Responsibilities:
• Oversee the development of design layouts and the modification of existing designs to satisfy customer and production requirements.
• Develop engineering product definition to establish the primary structures system design for satellite product lines including primary structures, deployable structures and antenna/feed/horn structures, assemblies, wire harness and electro-mechanical products based upon Company requirements and parameters.
• Coordinate development of engineering product definition with internal/external parties to ensure compliance with applicable standards, requirements and design parameters as well as product functionality.
• Integrate work statement, work scope and work transfer packages with internal and external customers to requirements.
• Oversee, direct and integrate the completion of product definition across internal and external business partners and products to provide a functional end-product.
• Investigate and resolve complex manufacturing process or engineering related issues.
• Verify accuracy of engineering data produced by others.
• Support team to develop, maintain and modify structures/payload system, component and wire harness designs, using 3-D Computer Aided Design tools (UG NX required), Geometric Dimensioning and Tolerancing (GD&T – ASME Y14.5M) standards and/or other design methods, to drive product definition with other engineering groups, production operations, suppliers and external customers throughout the product lifecycle. Candidates will use Engineering Design Release System (EDRS).
• Support and lead performance, integration and analysis of tests to validate and verify systems and components meet requirements and specifications.
• Support supplier development, test and production activities and coordinates with the supplier to optimize the design and achieve program goals.
• Assist with investigation of emerging technologies to develop concepts for future product designs to meet projected requirements.
• Support definition of mechanical, structural, environmental design and integration requirements for the S/C and its constituent assemblies and components including both flight and non-flight (GSE) hardware.
• Support definition of spacecraft drawing/model tree and assignment, general arrangement drawing/model, and all Interface Control Dwg/Models including but not limited to Moving Mechanical Assemblies (MMAs).
• Support and maintains drawing/modeling requirements, standards and flow-down thereof.
• Support definition of design standards required for design-analysis integrated models.
• Support definition of mechanical design trade space and closure criteria.
• Support definition and execution on CCCP (Critical Clearance Control Plan) including definition and verification of CCCL (Critical Clearance Control List activities).
• Support approval of manufacturing and integration plan, Digital Mock-Up (DMU) and Virtual Manufacturing (VM) simulation reviews.
• Support approval of design reviews, test plans and procedures, critical planning procedures.
• Up to 10% travel

Qualification:

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-8191
Job Location: Kennedy Space Center, FL
Rate: Based on experience
Duration: 6 Months
Input Date: 03/12/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: jobs@moseleytechnical.com
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Design & Analysis Engineer 4

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Mechanical Systems Design & Analysis Engineer 4
(U.S. Citizenship Required*)
Kennedy Space Center, FL
2019-8192

Responsibilities:
• Lead development and maintenance of engineering product definition.
• Oversee development of design layouts and the modification of existing designs to satisfy customer and production requirements.
• Develop engineering product definition to establish the primary structures system design for satellite product lines including primary structures, deployable structures and antenna/feed/horn structures, assemblies, wire harness and electro-mechanical products based upon Company requirements and parameters.
• Coordinate development of engineering product definition with internal/external parties to ensure compliance with applicable standards, requirements and design parameters as well as product functionality.
• Integrate work statement, work scope and work transfer packages with internal & external customers to requirements.
• Oversee, direct and integrate completion of product definition across internal and external business partners and products to provide a functional end-product.
• Investigate and resolve complex manufacturing process or engineering related issues.
• Verify accuracy of engineering data produced by others.
• Support team to develop, maintain and modify structures/payload system, component and wire harness designs, using 3-D Computer Aided Design tools (UG NX required), Geometric Dimensioning and Tolerancing (GD&T – ASME Y14.5M) standards and/or other design methods, to drive product definition with other engineering groups, production operations, suppliers and external customers throughout the product lifecycle.
• Use Engineering Design Release System (EDRS).
• Support and lead performance, integration and analysis of tests to validate systems & components meet requirements & specifications.
• Support supplier development, test and production activities and coordinate with the supplier to optimize design and achieve program goals.
• Assist investigation of emerging technologies to develop concepts for future product designs to meet projected requirements.
• Support and maintain drawing/modeling requirements, standards and flow-down thereof.
• Support definition
o of mechanical, structural, environmental design and integration requirements for the S/C and its constituent assemblies and components including both flight and non-flight (GSE) hardware.
o of spacecraft drawing/model tree and assignment, general arrangement drawing/model, and all Interface Control Dwg/Models including but not limited to Moving Mechanical Assemblies (MMAs).
o of design standards required for design-analysis integrated models.
o of mechanical design trade space and closure criteria.
o and execution on CCCP (Critical Clearance Control Plan) including definition and verification of CCCL (Critical Clearance Control List activities).
• Support approval of manufacturing and integration plan, Digital Mock-Up (DMU) and Virtual Manufacturing (VM) simulation reviews.
• Support approval of design reviews, test plans and procedures, critical planning procedures.
• Up to 10% travel to other sites, suppliers, and customers.

Qualification:
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's and 9+ years' experience, Master's with 7+ years' experience or PhD with 4+ years' experience.
• Degree from ABET accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-8192
Job Location: Kennedy Space Center, FL
Rate: Based on experience
Duration: 6 Months
Input Date: 03/12/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: jobs@moseleytechnical.com
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Design & Analysis Engineer 5

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Mechanical Systems Design & Analysis Engineer 5
(U.S. Citizenship Required*)
Kennedy Space Center, FL
2019-8190

Responsibilities:
• Lead development and maintenance of engineering product definition.
• Oversee design layouts development and existing designs modification to satisfy customer and production requirements.
• Develop engineering product definition to establish the primary structures system design for satellite product lines including primary structures, deployable structures and antenna/feed/horn structures, assemblies, wire harness and electro-mechanical products based upon Company requirements and parameters.
• Coordinate development of engineering product definition with internal/external parties to ensure compliance with applicable standards, requirements and design parameters as well as product functionality.
• Integrate work statement, work scope and work transfer packages with internal and external customers to requirements.
• Oversee, direct, and integrate the completion of product definition across internal and external business partners and products to provide a functional end-product.
• Investigate and resolve complex manufacturing process or engineering related issues.
• Verify accuracy of engineering data produced by others.
• Support team to develop, maintain and modify structures/payload system, component and wire harness designs, using 3D Computer Aided Design tools (UG NX required), Geometric Dimensioning and Tolerancing (GD&T – ASME Y14.5M) standards and/or other design methods, to drive product definition with other engineering groups, production operations, suppliers and external customers throughout the product lifecycle.
• Use Engineering Design Release System (EDRS).
• Support and lead performance, integration and analysis of tests to validate systems & components meet specifications.
• Support supplier development, test and production activities and coordinate with the supplier to optimize the design and achieve program goals.
• Assist with investigation of emerging technologies to develop concepts for future product designs to meet projected requirements.
• Support definition of mechanical, structural, environmental design and integration requirements for the S/C and its constituent assemblies and components including both flight and non-flight (GSE) hardware.
• Support definition of spacecraft drawing/model tree and assignment, general arrangement drawing/model, and all Interface Control Dwg/Models including but not limited to Moving Mechanical Assemblies (MMAs).
• Support and maintain drawing/modeling requirements, standards and flow-down thereof.
• Support definition
o of design standards required for design-analysis integrated models.
o of mechanical design trade space and closure criteria.
o and execution on CCCP (Critical Clearance Control Plan) including definition and verification of CCCL (Critical Clearance Control List activities).
• Support approval of manufacturing and integration plan, Digital Mock-Up (DMU) and Virtual Manufacturing (VM) simulation reviews.
• Support approval of design reviews, test plans and procedures, critical planning procedures.
• Up to 10% travel to other company sites, suppliers, and customers

Qualification:
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's degree with 14+ years' experience, Master's degree with 12+ years' experience or PhD with 9+ years' experience.
• Degree from ABET accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-8190
Job Location: Kennedy Space Center, FL
Rate: Based on experience
Duration: 6 Months
Input Date: 03/12/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: jobs@moseleytechnical.com
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mid-Level Composite Aero-Structures Design Engineer

Description:
Composite Aero-Structures Design Engineer
Location: Mojave, CA
12+ month contract

Essential Functions & Responsibilities:

Use CATIA V5 with Composite Work Bench to Design Composite aircraft structures.

Education: BS degree in Engineering: Mech-Aero-Civil-Struct.

2-10 years of experience required.

REQUIRED Minimum Composite Design Experience:

2 Year’s Experience of air- frame design (Wing or Fuselage or Empennage)
2 Years experience with CATIA V5 with CPD / CWB and/or Fibersim.
Mandatory Software Skills:

CATIA V5 + Composite Work Bench CWB / CPD or Fibersim.
MS Word, MS Excel, MS PowerPoint.
Personal and Interpersonal Skills

Clear intuitive understanding of load path & design intent of structural parts.
Understanding of aircraft internal loads & how to design efficient structure.
Strong interpersonal skills with willingness to ask questions & dig for answers
High degree of collaboration and openness with team members is expected.
Ability to work independently, be insightful, resourceful & innovative.
Willingness to do whatever work is assigned.
Great verbal & written communication skills in English.
Ability and willingness to interface with your co-workers.








Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 56343
Job Location: Mojave, CA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12+ months
Start Date: ASAP
Input Date: 03/13/2019
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Model Based Systems Engineer (MBSE)

Description:
Location: Canoga Park, CA
Rate: $70.00 - $96.50/HR
Duration: 6 month contract
Shift: 9/80 Schedule. OT possible.
Per Diem Split: Yes (if eligible)

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
-The successful candidate will have experience using IBM Rational tools including Rhapsody/Design Manager (DM); Rational Publishing Engine (RPE); and the Collaborative Lifecycle Management (CLM) tools of DOORS Next Generation (DNG), Quality Manager (RQM), and Team Concert (RTC).
-Knowledge of Jazz Team Server (JTS) enterprise management is useful.
-A mastery level of practice as a SysML Model User and Builder is required.
-Understanding of how these applications are deployed and used in the aerospace industry is preferred.
-Rocket engine or propulsion system domain knowledge is desirable.
-The successful candidate will develop new company capability, provide tool troubleshooting support for programs, document work instructions, provide training, and communicate success stories.


Skills:
Required:
-Experience using IBM Rational tools including Rhapsody/Design Manager (DM); Rational Publishing Engine (RPE); and the Collaborative Lifecycle Management (CLM) tools of DOORS Next Generation (DNG), Quality Manager (RQM), and Team Concert (RTC).
-An intermediate level of practice as a SysML Model User and Builder is desired.
-The successful candidate will develop new company capability, provide tool troubleshooting support for programs, document work instructions, provide training, and communicate success stories.

Desired:
-Knowledge of Jazz Team Server (JTS) enterprise management is useful.
-Understanding of how these applications are deployed and used in the aerospace industry is preferred.
-Rocket engine or propulsion system domain knowledge is desirable.


Education:
-BS or MS in Engineering, Computer Science or related field is required.
-MS in Systems Engineering is desirable.
 
Job Number: 9767
Job Location: Canoga Park, CA
Rate: $70.00 - $96.50/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 03/06/2019
Last Updated: 04/29/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Multiple Positions: Software Engineers in El Segundo, CA

Description:
Software Engineer

Location: El Segundo, CA
Duration: 6+ months

Description:
Client Satellite Division in El Segundo is seeking Software Engineers, passionate about space and excited to work in a multi-disciplined, collaborative engineering environment to design, develop and implement control and communications software for a new fleet of Client satellites.

A variety of projects to match diverse interests include:
- Software infrastructure and device drivers for new embedded processors and hardware interfaces to satellite sensors and actuators.
- Communication payload resource control, data management and network interfaces.
- Guidance and navigation control algorithms.
- Web-based tools and services supporting satellite development and operations.
- Integration and test of satellite control software using simulators and ground systems.

Primary Responsibilities:
- Responsible for full life-cycle development including requirements analysis, software architecture, design, coding, unit test, integration and formal qualification.
- Candidate should possess excellent communications skills to participate in design and code reviews, have a thorough understanding of version control and software quality attributes, such as testability, portability and maintainability, and enjoy a self-driven and collaborative development approach.
Client is the world's largest aerospace company and leading manufacturer of commercial airplanes and defense, space and security systems. We are engineers and technicians. Skilled scientists and thinkers. Bold innovators and dreamers. Join us, and you can build something better for yourself, for our customers and for the world.

Qualifications:
Degree and typical experience in engineering classification:
Bachelor's and 5 or more years' experience, Master's degree with 3 or more years' experience or PhD degree with experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
Degree in computer engineering, computer science or equivalent is preferred.

Basic Qualifications:
- 5+ years of software development experience in C++ using object oriented design methods.
- Proficiency in design and implementation of multi-threaded real-time applications; use of TCP/IP protocols and user/kernel level OS abstractions.

Preferred Qualifications:
- Hands-on experience with Java, C#, JavaScript, Python, TCL, XML.
- Experience with avionics control algorithms, search algorithms and math libraries, telemetry and command handling.
- Hands-on experience with hardware interfaces, embedded processor architectures, I/O device drivers and board support packages.
- Hands-on experience with embedded/real-time OS (Linux, VxWorks, Integrity) and CAN or SpaceWire protocols.
- Hands-on experience in networking, SQL and noSQL databases, web-based development.
- Proficiency in UML modeling, test-driven development, Agile process and DevOps tools.

Experience Level:
Individual Contributor
 
Job Location: El Segundo, CA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 months
Start Date: January
Input Date: 12/26/2018
Last Updated: 05/09/2019
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NC Catia Programmer

Description:
Program complex Aerospace parts 5 axis work
 
Job Number: 6
Job Location: Mid West
Rate: Open
Per Diem: Yes
Overtime: Some
Duration: 6+
Start Date: ASAP
Input Date: 03/04/2019
Firm Name: ADDITIONAL TECHNICAL SUPPORT INC
Attention: Brian Ross
Address: 24A NORFOLK AVE
City, State: SOUTH EASTON, MA 02375
800 Phone: 877/871-0785

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NC Programmer with Espirit and CATIA V5

Description:
Principal Duties:

• Plan machining operations by reviewing work orders, 3D model, engineering GD&T tolerances, materials, specification, and machining parameters.
• Works on project team with primary responsibility in startup and run-off actions to introduce new machining centers into production
• Provides guidance to CNC programming staff in best practices. Assists in establishing best practices and follows-up to insure they are followed correctly
• Analyze drawings and design data in order to calculate correct machining methods, machines, tool selection, machine speeds, and feed rates in accordance with leading-edge industry best practices
• Programming CNC mills and lathes by entering instructions, including zero and reference points; setting tool registers, offsets, and compensation values
• Leads in the design and creation of modular fixturing and quick-change tooling
• Maintain specifications; taking measurements; detecting malfunctions; troubleshooting processes; adjusting and reprogramming controls; adhering to quality assurance procedures and processes

Qualifications:

• Eight years of CNC programming experience which includes 5 axis vertical milling, lathes with live tooling and 4 axis horizontal milling
(must have 3 year experience in 4 axis horizontal mills)
• Demonstrated experience in new equipment and new program startups
• Design and application of universal or modular fixturing including zero-point
• Experience in the operation of pallet systems including the establishment of database parameters
• High speed or profit milling of aluminum in aerospace or automotive industries
• Proficient understanding in use of Presetting machines
• Good problem solving and conceptual skills
• Excellent communication skills to convey detailed instructions to machine operators, programmers, and suppliers.
• Proficient understanding of G-code and M-code programming
• Interpret GD&T
• Demonstrated experience in improving machining cycle times (speeds & feeds) and setup times in aerospace or automotive industrial production environments
• CNC programming using Esprit or CATIA V5 Advanced Machining
• Proficient understanding of CATIA V5 3D design
• Basic metal fabrication skills
• Experience in machining aerospace composite materials and using high speed routers
• Associates Degree, Machinist/CNC Programming
 
Job Number: 18-821
Job Location: AR
Per Diem: Split
Overtime: Possible
Duration: 6 months +
Start Date: mid June
Input Date: 04/25/2019
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

Non-Destructive Testing (NDT) Level 3 Technician (UT, ET and PT)

Description:
PDS Tech, Inc. is seeking a Non-Destructive Testing (NDT) Level 3 Technician in Stratford, CT
The ideal candidate will be primarily developing UT, ET and PT Non-Destructive test instructions for composite components. 

Other NDT techniques will also be developed depending on candidates existing experience with other methods.

Occasional travel will be required to other Facilities within Connecticut and to Pax River, MD to review aircraft configuration, to perform Non-Destructive Inspection, and to develop Inspection Techniques for aircraft.

You will work closely with a team of Design Engineers, NDT Level 3's, Level 2’s, and Engineering Technicians to design inspection standards, to coordinate for standard fabrication, and to write and approve inspection techniques for components using the standards.

The position is contingent upon being able to certify in UT, ET and PT Level 3 per NAS 410 requirements within 90 days of beginning employment.

Secondary Level 3 responsibilities include:
•Performing engineering evaluations including defect analysis, NDT methods analysis, and inspection (when inspection is required must have a minimum level II certification).
•Preparing and reviewing engineering specifications.
•Developing and evaluating new equipment and technology.
•Providing technical support to manufacturing, engineering, programs, field personnel, and suppliers.
•Auditing internal and external NDT inspection facilities.
•Participating in development of NDT training course material for Level I, II, and III.
•Testing and certifying NDT Level I, II, and III Inspectors in accordance with NAS 410 and company requirements.
Basic Qualifications
•Certification (ASNT Level 3 certification, NAS 410 Level 3 certification, or Equivalent in UT, ET and PT).
•Ability to certify to NAS 410 UT, ET and PT Level 3 requirements within 90 days of employment. (Including vision correctable to 20/25 in at least one eye.)
•Experience performing UT, ET and PT NDT on Composite materials.
•Proficiency in Microsoft Office products (Word, PowerPoint and Excel) and database utilization.
•Must be a US Citizen or legally authorized to work in US as a permanent resident.

Desired skills
•Composite UT, ET and PT experience on Aerospace Components.
•Bachelor's degree or above in Engineering or Technology discipline.
•Documented 5-10 years of Aerospace Non-destructive testing.
•Technical writing experience.
•Non-destructive test (NDT) experience with composite structures.
•The ability to collaborate and work well with fellow team members.
•Experience using CATIA or other 3D modeling software a plus.
•Familiarity with NAVAIR Nondestructive inspection manuals and processes.
•Experience in Laser Testing Methods (LM), or Thermal/Infrared Testing (IR) is a plus
 
Job Number: 1810094139
Job Location: Stratford, CT
Duration: 18 months
Input Date: 02/25/2019
Last Updated: 09/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002qw1WQAQ&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Non-Destructive Testing (NDT) Level 3 Technician (UT, ET, PT)

Description:
The ideal candidate will be primarily developing UT, ET and PT Non-Destructive test instructions for composite components.

Other NDT techniques will also be developed depending on candidates existing experience with other methods.

Occasional travel will be required to other Facilities within Connecticut and to Pax River, MD to review aircraft configuration, to perform Non-Destructive Inspection, and to develop Inspection Techniques for aircraft.

You will work closely with a team of Design Engineers, NDT Level 3's, Level 2’s, and Engineering Technicians to design inspection standards, to coordinate for standard fabrication, and to write and approve inspection techniques for components using the standards.

The position is contingent upon being able to certify in UT, ET and PT Level 3 per NAS 410 requirements within 90 days of beginning employment.

Secondary Level 3 responsibilities include:
•Performing engineering evaluations including defect analysis, NDT methods analysis, and inspection (when inspection is required must have a minimum level II certification).
•Preparing and reviewing engineering specifications.
•Developing and evaluating new equipment and technology.
•Providing technical support to manufacturing, engineering, programs, field personnel, and suppliers.
•Auditing internal and external NDT inspection facilities.
•Participating in development of NDT training course material for Level I, II, and III.
•Testing and certifying NDT Level I, II, and III Inspectors in accordance with NAS 410 and company requirements.

Basic Qualifications
•Certification (ASNT Level 3 certification, NAS 410 Level 3 certification, or Equivalent in UT, ET and PT).
•Ability to certify to NAS 410 UT, ET and PT Level 3 requirements within 90 days of employment. (Including vision correctable to 20/25 in at least one eye.)
•Experience performing UT, ET and PT NDT on Composite materials.
•Proficiency in Microsoft Office products (Word, PowerPoint and Excel) and database utilization.
•Must be a US Citizen or legally authorized to work in US as a permanent resident.

Desired skills
•Composite UT, ET and PT experience on Aerospace Components.
•Bachelor's degree or above in Engineering or Technology discipline.
•Documented 5-10 years of Aerospace Non-destructive testing.
•Technical writing experience.
•Non-destructive test (NDT) experience with composite structures.
•The ability to collaborate and work well with fellow team members.
•Experience using CATIA or other 3D modeling software a plus.
•Familiarity with NAVAIR Nondestructive inspection manuals and processes.
•Experience in Laser Testing Methods (LM), or Thermal/Infrared Testing (IR) is a plus
 
Job Number: 1810094139
Job Location: Stratford, CT
Per Diem: split
Overtime: possible
Duration: 18 mos
Start Date: ASAP
Input Date: 03/14/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Engineer Software Quality 3 - Clearance CA

Description:
Principal Engineer Software Quality 3 (Job Number:18027673)

Number of Openings: 1

Location: California-Rancho Bernardo

Shift: 1st Shift

Target Start Date: Feb 4, 2019

Target End Date: Jan 31, 2020

Pay rate: $52.00

Location: Rancho Bernardo, CA

Clearance: Secret needed to start

Candidate will provide the program’s overarching focus on systems and software, product and process, quality assurance throughout the entire software life-cycle.

• Actively engage and lead Systems and Software Quality Assurance SSQA) bid and proposal efforts to ensure the SQA cost estimating relationship and statement of work are properly bid and estimated.
• Participate in Peer Reviews and Product Reviews as a principal team member to ensure 1st time quality and compliance to program and company requirements.
• Ensure the flow down of requirements is complete and unambiguous and that consistent bidirectional traceability is maintained.
• Participate in contractual reviews and audits, program/IPT meetings, and configuration control board meetings to provide SQA leadership and guidance.
• Perform process audits of the engineering and management processes to assure compliance to established policies, procedures, work instructions, and program specific plans.
• Examine the products associated with the preparation and configuration control of software test environments to assess the team’s readiness to enter formal testing.
• Witness execution of software qualification and system acceptance tests to ensure tests are executed in accordance with approved test procedures, requirements are fully verified, and that all test procedure and software anomalies are documented and tracked to closure.
• Evaluate and ensure the overall capability and quality management system of software suppliers via; pre-contract supplier surveys, surveillance audits, product reviews, formal milestone reviews, and test witnessing.
• Facilitate thorough root cause analysis on all major findings product and process) and ensure appropriate corrective and preventive actions are developed and implemented in a timely manner.

Basic Qualifications:

· Bachelor’s Degree in a Science, Technology, Engineering and Math (STEM) and 5 years of software engineering or quality experience OR Master’s Degree in STEM and 3 years of software engineering experience; OR a PHD
· Experience developing and testing software coded in Java, C++, C and other OOP languages
· Experience within the aerospace/defense industry
· An active in-scope DoD Secret clearance
· The ability to obtain/maintain program access

Preferred Qualifications:
· Experience with software life cycle processes, including peer reviews, requirements analysis, implementation, test, configuration management, cyber security and risk management.
· Experience with modern software development models (Waterfall, Incremental, Spiral, Agile)
· Experience with software metrics implementation and analysis
 
Job Number: MB-1710S
Job Location: Rancho Bernardo, CA
Rate: 52/hr max
Per Diem: no
Duration: 12 months
Input Date: 12/20/2018
Last Updated: 03/28/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Procurement Rep (Buyer/Analyst) Level 2 / no clearance CA

Description:
163353
1208-1 Procurement Rep (Buyer/Analyst)
Work Location: Palmdale, CA
Status: Open

Qty: 6
Desired Start Date: 10/25/2018
End Date: 1/9/2020
Work Schedule: 9/80

Job Description:
Develops subcontract specifications, work statements, and terms and conditions for the procurement of specialized materials, equipment, and services. Prepares bid packages, conducts bidders' conferences, analyzes and evaluates proposals, negotiates subcontract provisions, selects or recommends subcontractors, writes awards, and administers resulting subcontracts. Negotiates and coordinates additions, deletions, or modifications to subcontracts. Participates with contracts administration and purchasing to develop subcontract policies and procedures. Procurement of Airframe detail parts and assemblies from engineering drawings (build to print) in a Material Requirements Planning (MRP) system and Systems, Applications, and Processes (SAP) system in support of various airframes. Source and purchase machinery, equipment, tools, raw material, packaging materials, parts, services, and/or supplies necessary for operation of an organization. Compiles and analyzes statistical data to help determine feasibility of buying products and to help establish price objectives. Compiles information to keep informed on price trends and manufacturing processes. Confers with suppliers and learns to analyze suppliers operations to determine factors that affect prices and determines lowest cost consistent with quality, reliability, and ability to meet required schedules. Reviews proposals, negotiates prices, recommends suppliers, analyzes trends, follows up orders placed, verifies delivery, approves payment, and maintains necessary records. May prepare bid packages. Will work with many internal and external departments and customers. Some travel may be required.

Will accept experience in lieu of degree.
-Buyer/Procurement defense/aviation/aerospace
experience.
- FAR/DFAR
-TINA (Truth & Negotiations Acts)
-Experience with negotiating contract types
(Note-this is not a logistics role.)

Level 2: BS+4-8 YRS or MS+2-6 YRS
Pay Rate: $50.00 Hourly

Areas of Expertise Advanced Purchasing No 1 4 - 6 Years
Areas of Expertise Commodity Purchasing No 1 4 - 6 Years
Areas of Expertise Purchasing No 1
Software Skills SAP No 2
Technical Skills Purchasing No 1
 
Job Number: JE-1208-1
Job Location: Palmdale, CA
Rate: 50/hr max
Per Diem: no
Duration: 15 months
Input Date: 04/08/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Review Engineer 2

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Product Review Engineer 2
(U.S. Citizenship Required*)
Heath, OH
2019-8201

Responsibilities:
• Apply basic knowledge of design and/or engineering principles to develop interim or final engineering solutions to product/process issues throughout production and/or for technical, operational and quality issues that cannot be resolved by the customer.
• Analyze, conduct failure analysis, root cause analysis and troubleshoot to understand root cause.
• Review requirement, evaluating test capability, Preparing Engineering Basis of estimates for proposal work.

Qualification:
• Expertise in electrical troubleshooting preferred
• Skill/experience in interpreting schematics, assembly drawings, and technical manuals
• Skill/experience in writing proposals and reports
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's degree and typically 2+ years' experience in an engineering classification or a Master's degree with experience in an engineering classification.
• Degree from ABET accredited course of study, in engineering, etc.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-8201
Job Location: Heath, OH
Rate: Based on experience
Duration: 6 Months
Input Date: 03/12/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: jobs@moseleytechnical.com
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Review Engineer 4

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Product Review Engineer 4
(U.S. Citizenship Required*)
Corpus Christi, TX
2019-8130

Responsibilities:
• Apply broad knowledge of engineering principles.
• Assess and resolve product/process issues through the product lifecycle.
• Lead research of technical, operational and quality issues that cannot be resolved by customer and designs interim and final engineering solutions.
• Lead others to analyze, conduct root cause analysis and develop dispositions for non-conformances.
• Develop and implement product/process improvements.
• Use innovative approaches and unique applications to address complex nonconforming conditions and to detect deviations.
• Analyze reported problems for potential safety issues; recommend and manage complex resolution.
• Represent the engineering community in the repair and overhaul environment.
• Ensure supplier and build partner compliance with company standards.
• Develop customer correspondence for continued safe operation and maintenance of equipment.
• Work with product repair teams and accident investigation or support teams.
• Lead the design of interim structural repairs and conducts static strength analysis.
• Develop and lead non-destructive test procedures, tools and standards.

Qualification:
• Required – active Secret clearance. Candidates without this clearance or higher will not be considered.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's and 9+ years' experience, Master's with 7+ years' experience or PhD with 4+ years' experience.
• Degree from ABET accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-8130
Job Location: Corpus Christi, TX
Rate: Based on experience
Duration: 7 Months
Input Date: 03/01/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: jobs@moseleytechnical.com
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Production Supply Chain Manager / direct hire Palmdale CA

Description:
Job ID#: 21680 Direct Hire position

Seeking production control experience such as stock control, inventory, supply chain, shipping, etc. along with the management experience.

The role is Production Control Manager (attached is the job description).

Key areas: extensive and progressive experience in production control combination of the following.
• supply chain management
• project management dealing with budgets
• labor utilization
• inventory management
• solid leader
o Overall 9+ years of experience with Master’s degree
o 11+ years of experience with Bachelor’s degree
o At least 5+ years of leadership experience
o mentorship
o communication
o development
Industries:
• Any – aerospace, manufacturing, automotive, etc.

Alternative titles:
• Production Control Supervisor and/or Manager
• Supply Chain/Inventory Supervisor and/or Manager
• Inventory Supervisor and/or Manager
• Stockroom or warehouse Supervisor and/or Manager
• Program Manager
• Project Manager


Job Title: Experienced Production Supply Chain Manager
Job Category: Manufacturing, Material and Production Control
City: Palmdale
State: California
Full-Time Salary


**Seeking strong production control experience including inventory, supply chain, shipping, etc. along with the management.

Job Summary


We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

The experienced Supply Chain Inventory Manager is responsible for planning and managing performance of the aircraft production and material control department(s) typically through experienced professional staff or subordinate manager(s). The position manages some or all phases of production and material control to ensure a controlled flow of approved materials timed to meet production requirements. Participates with executive management in developing and implementing annual and long-term objectives for the department(s). May be responsible for decisions that have an impact on work processes and outcome where erroneous decisions could result in serious delays in projects and/or operations. Participates in defining production planning, material control, and administration of the designated ERP tools in support of program schedules.



Duties and Responsibilities

•Manages all phases of the department(s) task execution including planning and recommending policies and procedures to ensure department objectives are attained.


•Participates in the development, interpretation and implementation of manufacturing policies and practices while participating in determining and implementing necessary changes.


•Participates in developing and implementing annual and long-term objectives and monitors adherence to plans and objectives.


•Ensures the scheduling of material will meet the company's commitment to delivering quality products with optimum utilization of resources.


•Monitors adherence to performance standards by support groups such as purchasing, contracts, finance, and quality, and ensures issues are addressed as needed. Monitors performance from development of material master creation through procurement, material receipt and consumption on the manufacturing shop floor. Manages the Material Requirements Planning (MRP) functions through the appropriate ERP tool.


•Ensures the appropriate identification and management of material requirements are established for production and manufacturing from inception to delivery.


•Develops, recommends, implements and monitors consistency of processes across multiple programs to the maximum extent practical; conducts quality control audits and evaluates work standards and performance levels to ensure uniformity, effectiveness and appropriate staffing levels are maintained.


•Oversees the minimizing of inventory carrying cost and reduction of material burden contribution to meet industry standard.


•Manages and actively participates in the planning, attraction, selection, retention, and development of human resources to ensure the availability of the required professional talent to ensure organizational requirements are met.


•Maintains the strict confidentiality of sensitive information.


•Responsible for ensuring all laws, regulations and other applicable obligations are observed wherever and whenever business is conducted on behalf of the Company.


•Responsible for ensuring work is accomplished in a safe manner in accordance with established operating procedures and practices. Additional Functions Other duties as assigned or required.


Job Qualifications
•Bachelor's or master's degree in business administration or related field: ◦Eleven or more years progressive experience with a bachelor's degree
◦Nine years or more with a master's degree.​
◦​Five or more years managing staff in a manufacturing environment. Equivalent professional experience may be substituted in lieu of education.

•Must demonstrate a thorough expertise of production, material control and purchasing principles, theories and concepts.
•Must be able to provide leadership and direction to professional staff and lower management levels.
•Must be customer focused and possess:◦the ability to identify issues, analyze and interpret data, and develop innovative solutions to a variety of complex problems using a high degree of independent judgment;
◦excellent verbal and written communication skills to accurately document, report, and present findings to a variety of internal and external audiences;
◦excellent interpersonal skills to influence and guide all levels of employees;
◦the ability to effectively and efficiently initiate, plan, budget and manage projects;
◦the ability to develop and administer budgets, schedules and performance standards; and,
◦excellent computer skills.
◦Ability to work independently or in a team environment is essential as is the ability to work extended hours and travel as required.


Equal Opportunity Employer.

Travel Percentage Required : 0% - 25%
 
Job Number: JE-21680
Job Location: Palmdale, CA
Rate: Salary range: 95K – 115K
Duration: direct hire
Input Date: 05/07/2019
Last Updated: 06/04/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Lead - Repair Engineering

Description:
Project Lead - Repair Engineering
Contract-to-hire
Location: Kansas City, MO
Summary:
We are looking for a candidate to lead the engineering team in the accomplishment of repairs for in service aircraft and aircraft in heavy maintenance.
Duties will include providing guidance and helping develop less experienced engineering staff, provide technical coordination/expertise between the engineering team and the customer, and interacting with vendors and internal organizations. Applicant should have relevant airline, MRO, or OEM in-service support experience with proven leadership.
The individual will lead activities of engineering staff at the discretion of Engineering Management to complete tasks accurately while maintaining responsiveness in order to maintain aircraft, component, and engineering program schedules. Other duties will include development of proposals, assisting with planning and hiring, and other Engineering Management tasks.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
• Leads activities of direct Engineering staff at the discretion of Engineering Management to achieve accurate and timely completion of repairs and modifications during maintenance and component overhaul visits.
• Plans, reviews, organizes, and prioritizes engineering tasks to ensure Engineering completes tasks and maintains responsiveness in order to maintain aircraft, component, and engineering program schedules.
• Primary point of contact between customer representatives and/or internal customers to ensure consistent action in accordance with customer requirements.
• Mentor and train Repair Engineers from all levels of experience; identify and grow the expertise and experience of the team.
• Recognize and fully understand the proper use of all applicable customer, OEM, regulatory, and maintenance requirements, and ensure that these are met.
• Identify performance related issues and provides feedback to management.
• Coordinate and assist in implementing new policies and procedures within the Engineering department to help improve efficiency.
• Analyze and substantiate complex repair and modification designs using standard accepted industry practices. Produce technical analysis of repair standards and history for which FAA approval can be obtained to ensure compliance with all appropriate regulatory, customer, OEM, operations, and maintenance requirements.
• Review existing technical data, technical drawings, and previous history for entire airframe structure, mechanical / hydraulic systems and components, engine pylon/struts, and landing gear; in addition, some avionics, indication, lighting, and electrical systems are occasionally reviewed.
• Provide written technical accomplishment instructions for aircraft repairs or modifications to maintenance, customer, and regulatory authorities as necessary.
• Communicate technical details of repair or modification designs through technical writing and computer drafting functions.
• Independently evaluate, select, and adapt situations, and modify techniques, procedures and criteria to solve problems encountered.
• Approve engineering documents within authorized signatory level.
• Assist in interviewing and making hiring recommendations for new Engineering personnel.
• Participate in the development of work statements and hour estimates in support of proposals.
AUTHORITY:
The individual in this position may initiate technical instructions that are substantiated by data acceptable to or approved by the FAA and EASA or equivalent. For technical instruction pertaining to work accomplished on aircraft or components operated under CFR Part 91, 121, and 145, authority is as specified by the air carrier's procedures and/or Repair Station Manual.
SKILLS AND KNOWLEDGE:
• Experienced with OEM airframe, system, and interior design practices.
• Strong working knowledge of MyBoeingFleet and AirbusWorld for OEM datasets.
• Must be adaptable and flexible at all times and apply their knowledge and skills to develop creative solutions to a wide variety of unique design, modification, and repair problems encountered.
• Strong PC skills will include 3D Computer Aided Design proficiency (SOLIDWORKS or AutoCAD preferred), MS Office products (Word, Excel, PowerPoint, Visio and Project), and basic computer drafting skills.
• Ability to accomplish basic stress analysis and substantiation for complex repairs or modifications using standard accepted industry practices and other structural design methodologies.
• Ability to understand regulatory requirements for airworthiness, for the FAA and various foreign authorities (EASA, etc.) and include in engineering documents, drawings and designs.
• Ability to understand and apply the policies / procedures of all customer(s).
• Ability to understand and apply information from Structural Repair Manuals (SRMs), Aircraft Maintenance Manuals (AMMs), Illustrated Parts Catalogs (IPCs), Service Bulletins (SBs), Airworthiness Directives (ADs) and other aircraft reference materials.
• Ability to interpret and use aircraft manufacturing, assembly, and installation drawings.
• Excellent interpersonal and communication (written and verbal) skills with other groups (avionics, certification, Program Management and Maintenance Leads, MRO Facilities and customers) experience strongly preferred.
• Self-motivated and multi-tasker; able to level load own workload.
• Strong time-management, and problem-solving skills.
EDUCATION AND/OR EXPERIENCE:
Bachelor of Science (B.S.) degree in Aerospace, Mechanical, or Civil Engineering desired with a minimum of ten (10) years relevant aerospace experience or 15 years of equivalent aircraft design experience required.







____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 55916
Job Location: St. Louis, MO
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/29/2019
Last Updated: 04/24/2019
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Management 3 CA

Description:
Project Management 3 (Job Number: 18029005)

Number of Openings: 1

Location(s): United States-California-Redondo Beach


Shift: 1st Shift

Target Start Date: Mar 4, 2019

Target End Date: Apr 3, 2020

Description

Duration of assignment: Up to 1 year

Location: Redondo Beach, CA

Clearance: None

Pay rate: $45.00 - $50.00

Work schedule: 9/80 A

Aerospace Systems has an opening for a Project Management 3 / Operations Project Management (OPM). This position will be located in Redondo Beach, CA.

The OPM 3 will work within the Space Park Center of Excellence Facilities and Real Estate Organization, supporting Facilities engineering, planning and change management in all aspects of procurement and construction operations.

Essential Functions:

· Work with Facilities Project Manager to develop requirements documents from information obtained from the program. (collection from all sources; maintain updates and revisions; folder location consistency)
· Change Management – Manage all changes requests that get presented to the change board ensuring impact mitigation, recovery and visibility, ensuring timely processing of all changes. Will conduct Internal stakeholder reviews to
ensure all stakeholder buy-in prior to formal change board.
· Establishing, updating, and managing project schedules that roll up to an IMS.
· Serves as a liaison between facilities organization, and the Program for executive status reports.
· Meeting facilitator for status meetings, executive reviews and change board.
· Assists in identifying project timelines, deliverables, and milestones.
· Tracking and reporting Project progress along with Project Risk and Opportunity visibility

Basic Qualifications:

- Bachelor’s degree or Higher
- 6 years of experience with project management in a construction management and/or facilities infrastructure role
- Proficient in MS Project
- Proficient in MS Office, including Power Point
- Ability to present to Higher Management including Directors and Vice Presidents.


Preferred Qualifications:

- Experience working within an Integrated Product Team (IPT)
- Experience integrating multiple MS Project schedules into an integrated whole.
- Experience with manufacturing engineering and their interaction with associated tooling
- Lean Manufacturing principles and/or process improvement (Green Belt or Black Belt)
- Experience with Risk Management, Return to Green (RTG) plans, and Scheduling cross functional activities
- Experience in Firm Fixed Price contracts and earned value management knowledge
 
Job Number: MB-1723
Job Location: Redondo Beach, CA
Rate: 50/hr max
Per Diem: no
Duration: 12 months
Input Date: 03/27/2019
Last Updated: 04/29/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Management Specialist 3

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Project Management Specialist 3
(U.S. Citizenship Required*)
Tukwila, WA
2019-8167

Responsibilities:
• Develop overall project plan consistent with project objectives as defined by the project owner and key stakeholders in accordance with accepted project management standards in the industry (e.g., Agile Framework).
• Work to improve business systems that support project decision makers.
• Lead/Coach others and direct all phases of projects or subsystems of major projects from inception through completion.
• Act as primary project contact to establish key stakeholder requirements and project objectives.
• Ensure all project control systems within the scope of the project are in place and integrates project data for decision makers.
• Apply SAFe Agile framework to coordinate status for 10 Agile Teams as part of the development team members.
• Lead Epic development across BT&E from people from 11 different sites. Coach Engineers to develop User stories for unique requirements.
• Coordinate user stories with the Product Owners in the Agile Teams.
• Coach SAFe Agile methodologies to team members.
• Create Program Increment Objectives from the user stories. Develop Increment schedules.
• Monitor progress of Objectives during 2-week increments (sprints). Support the integration with the rest of the enterprise.
• Support integration meetings, such as the daily standups, demos, etc.
• Local travel to different company sites to support meetings and workshops as requested.

Qualification:
• Must be highly proficient in the use of Microsoft Word, Excel and Microsoft Project.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's and typically 6+ years’ related work experience, a Master’s degree and typically 4+ years’ related work experience or an equivalent combination of education and experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-8167
Job Location: Tukwila, WA
Rate: Based on experience
Duration: 12 Months
Input Date: 03/07/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: jobs@moseleytechnical.com
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Manager (Aerospace Industry)

Description:
The ideal candidate will perform high complexity Engineering Management and Project Management for Technical Process Improvement projects. Responsibilities include developing productivity tools, managing documentation and tracking schedules.

Responsibilities •Collaborate with Integrated Product Team (IPT) Leads to develop and manage multiple schedules and work with various departments to ensure estimated project budgets and durations are accurate.
•Ensure timely baseline / scheduling requirements are accomplished
•Work closely with technical leads to ensure schedules and costs are accurate and comprehensive, and include milestones, deliverables, dependencies, predecessors, successors, lag time and all other pertinent MS Project data.
•Ensure the accuracy of project planning data that is used in the execution of projects, resource planning, and sales forecasting is up to date and accurate.
•Monitor and measure project progress, identify and work program-wide issues and provide support to Program Management with respect to cost, schedule, and deliverables.
•Generate reports showing project status, to include critical path analysis, EV data, TCPI, BEI, and actuals vs PMB.
•Collaborate with Program Management Office to develop and manage multiple schedules and work with various departments to ensure estimated project budgets and durations are accurate

Requirements •Bachelors Degree
•Minimum of 2+ years’ experience with BS or BA
•Experience in applying and interpreting integrated cost/schedule and critical path methodologies
•Demonstrated understanding of earned-value management principles and their application to complex projects.
•Experience using MS Project to monitor large projects.
•Advanced knowledge of MS Office Applications (MS Excel, Word, PowerPoint).
•Excellent verbal and written communication.
•Experience working on DoD programs with Integrated Program Management Report (IPMR) requirements.
•Experience in creating Work Breakdown Structures (WBS).
•Understanding of Systems / Project Engineering concepts and practices
•Experience running Schedule Risk Analysis and Schedule Health Checks.
•Understanding of System Engineering or Production practices.
•Detail Oriented.
•Ability to work in a team environment.
•Due to projects/programs candidate must be a US Citizen with ability to obtain a DoD Clearance
•Strong problem solving / analytical skills, as well as strategic thinking skills
•Ability to work in a fast paced, dynamic environment
•Understanding of how to prioritize workloads and daily duties
•Strong attention to detail
•Java Script, SQL, Database reporting
•2 trips per year to Windsor Locks, CT. 1 week each
Preferences •SharePoint knowledge a plus but not required
•Experience with Microsoft Project Server a Plus
 
Job Number: 1910098351
Job Location: Houston, TX
Overtime: Possible
Duration: 2 years
Start Date: ASAP
Input Date: 05/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Engineer III

Description:
Responsibilities:

This position provides organizational support for customer programs and supplier quality requirements. The candidate will be responsible for quality engineering, system, and process improvements and RCCA activity including non-conformance analysis and implementation of effective countermeasures.

Lead quality functions for assigned programs from proposal through shipment to the customer while complying with customer requirements and achieving cost and delivery expectations.
Actively participate in IPTs and leads FMEAs.
Host customer quality audits and participates in internal quality audits.
Interface with suppliers and customers concerning program quality requirements.
Issues and coordinates effective completion of supplier corrective actions (SCARs).
Coordinates internal and supplier Corrective and Preventative Actions (CAPA).
Provides advice and guidance in interpreting and adapting quality standards and regulations.
Works closely with Engineering in bringing quality products to production readiness.
Leads quality in production activities: materials, process and customer requirements.

Requirements:

BS/MS in science or engineering discipline with an emphasis in mechanical engineering
5+ years of quality engineering experience in an Aerospace environment.
Experience with high precision machined parts and assembly operations.
Interpreting customer specifications and implementing an effective quality assurance program.
Knowledge and understanding of current ISO 9001/AS 9100 quality systems.
Working knowledge of engineering specifications, drawings and GD&T.
Knowledge of process capability concepts including Statistical Process Control (SPC) techniques.
Strong analytical and problem-solving skills.
Working knowledge of continuous improvement, lean manufacturing and GEMBA
Strong skills in MS Windows – Excel, Word and PowerPoint.
Excels in a dynamic work environment.
Energetic, ability to work independently, possesses an entrepreneurial spirit.
Must be willing to travel as required.
Desired skills:

Six Sigma Black or Green Belt.
ASQ CQE/CQM Certification.
Experience working in military or aerospace quality systems.
Significant experience working directly with customers and suppliers.
 
Job Number: 371942
Job Location: Simi Valley, CA
Per Diem: No
Overtime: Possible
Duration: Direct
Start Date: ASAP
Input Date: 03/19/2019
Last Updated: 03/29/2019
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Assurance Engineer

Description:
Must Be Eligible for a Clearance

Provide QE floor support for the Apache Program Production Area.
Formal QE floor support in a manufacturing environment

Desired
ASQ CQE (Certified Quality Engineer) and / or CQIA (Certified Quality Improvement Associate)
SAP Application Experience
Experience with use of inspection gages and measuring equipment
Advanced AS9100 Interpretation and application experience.
Strong knowledge of Industry recognized Quality systems such as International (ISO), aerospace (AS), and FAA regulations
 
Job Number: 46182
Job Location: FL
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 03/06/2019
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Assurance Engineer

Description:
Position : Quality Assurance Engineer
Location: Ocala, FL
Duration: 21-22 months
Client : Biggest Aerospace and Defense

Description:
Provide QE floor support for the Apache Program Production Area.

Skill/Experience/Education:
Mandatory
Min 5 years formal QE floor support in a manufacturing environment

Desired
ASQ CQE (Certified Quality Engineer) and / or CQIA (Certified Quality Improvement Associate)
SAP Application Experience
Experience with use of inspection gages and measuring equipment
Advanced AS9100 Interpretation and application experience.
Strong knowledge of Industry recognized Quality systems such as International (ISO), aerospace (AS), and FAA regulations

Skill Matrix:
Skill Name: SAP Application Environment
Description: Hands on working knowledge of SAP in a MFG environment
Level: 5
Years: 4-5 Years

Skill Name: Direct QE floor support for CCA's and/or Cables & Harnesses
Description: Floor support for CCA, ECA, and/or C&H hardware build
Level: 5
Years: 4-5 Years

Skill Name: Work Instruction
Description: Experience with documentation for hourly operators
Level: 5
Years: 4-5 Years

Please share resume at rchaudhary@iconma.com or call (804)915-9602
 
Job Number: 19-03482
Job Location: Ocala, FL
Rate: Open
Per Diem: YES
Overtime: YES
Duration: 2 YEARS
Start Date: ASAP
Input Date: 03/06/2019
Firm Name: ICONMA LLC
Attention: Rohit
Address: 1201 PACIFIC AVE STE 600
City, State: TACOMA, WA 98402
Phone: 253/213-2012
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Assurance Engineer II

Description:
Position Purpose:
• Quality Assurance Engineer II develops and maintains optimum methods of controlling quality and/or reliability of product or service in assigned areas such as: statistical methods, tooling and gaging, inspection methods, and program planning.
• Responsible for providing technical support in the conduct of investigations on known Quality issues. Implements plans and instructions in support of departmental policies.
• The QAE will work to determine Root cause and corrective action for known Quality issues using the 8D methodology and validated by the audit group.
• Ensures compliance with all applicable regulations and develops and promotes a good working relationship with local regulatory authorities. Ensures a safe, conforming and quality product is delivered to our customers.

Education and Experience Requirements:
• Bachelors degree in Engineering, aviation sciences, quality systems or related technical field; or an equivalent combination of education and experience to successfully perform the essential functions of the job.
• Two (2) years quality assurance/control, manufacturing operations and/or military operations experience is required. Aerospace industry experience preferred.

Principal Duties and Responsibilities:
• Develop quality control methods required for the product or service of the area.
• Prepare department procedures and instructions as required to implement quality control requirements.
• Review Test and Assembly Documentation. Review new and revised Blue Prints.
• Recommend revision or modification of systems necessary to maintain or improve quality and/or reliability.
• Evaluate new quality control methods and techniques for application to current production and future planning and recommend actions.
• Analyze inspection methods, techniques, equipment, forms, systems, records, reports, and procedures as they affect control of product quality and reliability, and approve or recommend revision.
• Perform miscellaneous special assignment assigned by group leader or supervisor.
• Write and review both internal and external Corrective Actions.
• Follow-up on Corrective Action implementation.
• Participate in and lead audits and improvement workshops.
• Assure that the investigations on Quality issues are conducted according to department procedures and work instructions.
• Actively identify and complete process improvement projects related to achieving improved quality or efficiency of Quality processes

Other Requirements:
• An Airframe & Powerplant (A&P) may be used with 4 years of related experience (in addition to the experience requirements below) in lieu of the degree requirement.
• An ASQ certification (CQE) and/or experience as a FAA recognized airworthiness designee highly preferred.
• Knowledgeable of Geometric Dimensioning & Tolerance (GD&T) ASME Y14.5.
• Ability to define problems, collect data, establish facts, and draw valid conclusions.
• Working knowledge of Statistical tools used for problem resolution.
• Lean/Six Sigma experience or greenbelt preferred.
• Knowledge of manufacturing processes (i.e. Assembly, Machining, Special Process, Inspection, etc.).
 
Job Number: 24-347
Job Location: Tulsa, OK
Rate: $55
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 08/23/2019
Last Updated: 09/05/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon Ferguson
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Compliance Specialist

Description:
Quality Compliance Specialist

Phoenix, AZ
$40.78/hr
12 month W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
The quality organization is looking for a compliance specialist to support the quality clinic process and provide quality support. This specialist will work with various departments to satisfy our customers by managing escapes and internal nonconformances and provide customer support. The Quality Clinic is responsible for RRCA and supporting investigations in various processes. The Quality Clinic ensures the containment and RRCA is accomplished in a fast paced high visibility environment. The ideal candidate is one that has high energy, has excellent organizational, technical and analytical skills, can work well with others and can manage by influence. This position will report to the Quality Manager.
-Bachelors degree required

Responsibilities include:
• Prepare, maintain and follow quality clinic standard work and maintain clinic certifications.
• Track and publish quality clinic metrics.
• Perform Escape Management process to determine root cause, identify robust corrective actions and track effectiveness.
• Support Customer Return process for returned material.
• Facilitate and coach operations resolution escapes teams and Relentless Root Cause (RRCA) teams for high pain organizational issues (Cost, delivery, quality, EH&S, etc.)
• Manage and track effectiveness of corrective action requests
• Support product and process improvements that ensure quality metric goals are met (Escapes, Scrap, Rework and Repair).
• Utilize continuous improvement and lean tools to support process enhancements.
• Foster and maintain a cooperative relationship with our key regulatory customers. (FAA & DCMA)
• Drive a culture of continuous improvement through the use of ACE tools.
• Support the Receiving Inspection process and work with buyers and supplier quality team to ensure RRCA of supplier nonconformance.

The successful candidate should have:
• At least 4 years of experience in Quality, Manufacturing and/or Engineering with a minimum of 2 years in the aerospace industry.
• Excellent RRCA skill set with demonstrated ability to lead and coach others on RRCA.
• Strong interpersonal and communication skills and ability to facilitate and motivate teams.
• An understanding of Quality Procedures, Quality Management Systems and the Product Recall process.
• Demonstrated ability to interface with all levels of management and external customers (DCMA, FAA).
• Experience in using ACE tools to make process improvements in a manufacturing environment.
• ACE Associate (Lead QCPC/VSM/3P activities)
• Experience in Microsoft applications: Excel, PowerPoint, Word, Access
• Strong verbal and written communication skills.
• Past experience in an operations or manufacturing company preferred.
 
Job Number: 10528
Job Location: Phoenix, AZ
Rate: 40.78
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 02/25/2019
Last Updated: 03/04/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Compliance Specialist (Aerospace)

Description:
The Quality organization is looking for a Compliance Specialist to support the Quality Clinic Process and provide Quality Support. This Specialist will work with various departments to satisfy our customers by managing escapes and internal nonconformances and provide customer support. The Quality Clinic is responsible for RRCA and supporting investigations in various processes. The Quality Clinic ensures the containment and RRCA is accomplished in a fast-paced high visibility environment. The ideal candidate is one that has high energy, has excellent organizational, technical and analytical skills, can work well with others and can manage by influence. This position will report to the Quality Manager.

Responsibilities include: •Prepare, maintain and follow quality clinic standard work and maintain clinic certifications.
•Track and publish quality clinic metrics.
•Perform Escape Management process to determine root cause, identify robust corrective actions and track effectiveness.
•Support Customer Return process for returned material.
•Facilitate and coach operations resolution escapes teams and Relentless Root Cause (RRCA) teams for high pain organizational issues (Cost, delivery, quality, EH&S, etc.)
•Manage and track effectiveness of corrective action requests
•Support product and process improvements that ensure quality metric goals are met (Escapes, Scrap, Rework and Repair).
•Utilize continuous improvement and lean tools to support process enhancements.
•Foster and maintain a cooperative relationship with our key regulatory customers. (FAA & DCMA)
•Drive a culture of continuous improvement through the use of ACE tools.
•Support the Receiving Inspection process and work with buyers and supplier quality team to ensure RRCA of supplier nonconformance.

The successful candidate should have: •At least 4 years of experience in Quality, Manufacturing and/or Engineering with a minimum of 2 years in the Aerospace industry.
•Excellent RRCA skill set with demonstrated ability to lead and coach others on RRCA.
•Strong interpersonal and communication skills and ability to facilitate and motivate teams.
•An understanding of Quality Procedures, Quality Management Systems and the Product Recall process.
•Demonstrated ability to interface with all levels of management and external customers (DCMA, FAA).
•Experience in using ACE tools to make process improvements in a manufacturing environment.
•ACE Associate (Lead QCPC/VSM/3P activities)
•Experience in Microsoft applications: Excel, PowerPoint, Word, Access
•Strong verbal and written communication skills.
•Past experience in an Operations or Manufacturing company preferred.
Education: •Bachelors.
 
Job Number: 1910098873
Job Location: Phoenix, AZ
Overtime: possible
Duration: 12 months
Start Date: ASAP
Input Date: 07/10/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
RF Microwave Design Engineer 3 CA

Description:
RF Microwave Design Engineer 3 (Job Number: 18025908)

Number of Openings: 1

Location(s): United States-California-Azusa

Shift: 1st Shift

Target Start Date: Feb 25, 2019

Target End Date: Aug 31, 2019

Pay Rate: $55/hr

Work Schedule: 9/80

Duration of Assignment: 8-31-19

Northrop Grumman Aerospace Systems sector is seeking a RF Microwave Engineer 3 to join our team of qualified, diverse individuals. This position will be located in Azusa, CA.

The successful applicant will be assigned to support RF design, analysis, and test of passive RF Microwave weather sensors/systems, subsystems, and components. Specific assignments may include testing of RF subsystem and RF components, performing CAD simulations, supporting anomaly investigations, deriving RF requirements, performing system analysis, managing RF suppliers, and supporting receiver integration and test. Additional responsibilities may be assigned commensurate with performance or due to business needs.

Note that this role will work 1st shift with a flexible start time between the hours of 6:30 am and 9 am. Some off-shift work will be required as needed by the program.


Basic Qualifications:

BSEE + 5 years of RF or RF test experience or 13 years of experience may be considered in lieu of degree.


Preferred Qualifications:

BSEE + 10 years of RF and RF test experience
 
Job Number: MB-1709
Job Location: Azusa, CA
Rate: 55/hr max
Per Diem: no
Duration: 6 months
Input Date: 12/19/2018
Last Updated: 03/15/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
RMS (Reliability, Maintainability, Safety) Engineer

Description:
RMS (Reliability, Maintainability, Safety) Engineer

Colorado Springs, CO
$37.50/hr
12 month contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
Manages low to mid complexity projects responsible for ensuring that designs are sufficiently robust to satisfy customers’ needs for equipment that is life cycle cost-effective without sacrificing operator, maintainer, or system safety. Successful candidate will have deep knowledge and highly developed technical expertise. Performs advanced risk reduction and develops evaluation studies. Leads evaluations of engineering design concepts and provides guidance on production component selection and application.

Primary Responsibilities:
• Performs advanced risk reduction testing with minimum test rig equipment to provide data on new or high risk features.
• Develops, coordinates and conducts technical reliability studies and evaluations of engineering design concepts and design of experiments (DOE) constructs.
• Liaises closely with other project team members in areas such as stress, manufacturing, sourcing and configuration with respect to new designs or design changes.
• May recommend changes in the selection and application of production components.
• May determine units and/or batches requiring environmental testing, and specifies minimum number of samples needed to obtain statistically valid data.
• Oversees preparation of documentation with the end goal of system qualification and product certification (including system specifications, interface control documents, system description documents, test specifications and reports).
• Develops, coordinates and conducts technical reliability studies and evaluates engineering design concepts and design of experiments (DOE) constructs.
• Recommends design or test methods and statistical process control procedures for achieving required levels of product reliability.
• Compiles and analyzes performance reports, process control statistics, and relevant variables potentially affecting product and process.
• Includes possible development of mathematical models to identify units, batches or processes posing excessive failure risks.
• May determine units and/or batches requiring environmental testing.

Basic Qualifications:
• Bachelor's degree in Aerospace, Mechanical, or Comparable Engineering Degree
• A minimum of 7+ years of engineering experience
• Minimum of 5+ years of Reliability and safety experience
• Experience with Reliability and Safety Program Plans and Failure Modes and Effects Analysis (FMEA) Reports
• Detail oriented and thorough in the reliability activity due to the criticality of the seat performance
• Strong customer skills and customer focus (both internal and external customers)
• Strong analytical skills.
• Ability to work independently but primarily as the reliability lead for an integrated product team.
• Ability to multi-task and prioritize both daily issues and long- term projects.
• 100 percent dedicated to following all safety procedures and precautions.
• Excellent interpersonal skills.
• Excellent written and verbal skills with the ability to present RMS information to customers
• Experience at troubleshooting including in depth root cause analysis and corrective action closure.

Preferred Qualifications
• Master's degree in Aerospace, Mechanical, or Comparable Engineering Degree
• Experience with ARP4761 or MIL-STD- 882
• Experience with ARP4754A, FAR 25, and AC25.1309
• Experience with MIL- HDBK-470 and MIL- HDBK-472
• Experience using Windchill/Relex Reliability Software
• 3D CAD model interrogation experience
• Experience working in an Integrated Product Development Team (IPDT) environment
 
Job Number: 10554
Job Location: Colorado Springs, CO
Rate: 37.50
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 03/01/2019
Last Updated: 03/04/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

RS Interior Install Tech II

Description:
PDS Tech is seeking RS Interior Install Tech II for open positions Brunswick, GA


The Interior Installation Technician II works under general supervision to remove, install, and/or fabricate aircraft interiors, which may include items such as trim, carpet, sound proofing, light structure, cabinetry, panels and other accessories. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations. 

Principal Duties and Responsibilities: 

Essential Functions:

  1. Safely perform aircraft removal, installation, and/or fabrication of aircraft interiors (which may include galleys, closets, lavatories, side ledges, bulkheads, doors and panels). Coordinate with supervision and Inspection to ensure compliance with Repair Station procedures, internal and FAA paperwork, sign-offs and quality specifications.
  2. Use the material tracking system to create parts demand, track squawks and to sign-off work.
  3. Follow standard operating procedures when using tools and equipment such as hand tools, band saws, shears, sanders and brakes. Properly care for and maintain shop equipment and tools.
  4. Prepare and install aircraft interior items in accordance with company operation procedures and quality standards.
  5. Remove and re-install nut plates, inserts and other fasteners used in aircraft interiors. Apply proper use of hardware and fittings on aircraft installations.
  6. Comply with safety, 5S, and housekeeping policies and use personal protective equipment as required. Address unsafe conditions before putting people or property at risk.
  7. Assist technicians, under supervision, with aircraft maintenance requirements.
  8. Adapt to sudden schedule changes. 


Additional Functions:

  1. Work with lead and higher skilled technicians to develop and implement process improvements that reduce cost, cycle time, and man-hours using Lean Six Sigma and other process improvement techniques.
  2. Make and use simple patterns for own use employing standardized procedures.
  3. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
  4. Perform other duties as required. 


Other Requirements:

  1. Ability to read, write, speak, and understand the En