Job Search Results

180 listings were found that matched your search words: Keywords: Civil OR Industrial ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2024/03/28 Thursday 12:42PM Pacific Time by ContractJobHunter. )

Listings 1 - 180

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2580 - AVIONICS SYSTEMS INTEGRATOR - cv, word doc only

Description:
Responsible, as an Avionics Systems Integrator, to perform various tasks related to the development, qualification, certification and in-service support of Avionics systems on Challenger aircrafts.

Responsible for supporting investigation for in service and manufacturing issues and performing root cause analysis of Avionics systems.

Participate in the Avionics Systems architecture design to meet Aircraft Design Requirements and Objectives.

Support the Bombardier Flight Test Center in development and certification tests; witnessing of tests may be required.

Support the Final Assembly Line and In Service Aircraft for any development issues.

Manage, review and approve the deliverables of the Avionics System Suppliers.

Work with other functions & disciplines of the Challenger program to provide required information and also to collect required data to allow the Avionics design, development & certification effort to progress.

Support other departments such as Production, Customer Support, Program Office and Product Planning.

Participate in meetings and design reviews with Avionics System Suppliers and certification authorities.

Be able to travel is a must.

University degree in Electrical, Electronics, Software, or Aerospace Engineering. with at least five (5) years of relevant experience with the design, development, integration and certification of Avionics systems.

Good knowledge with the specification, design, integration, test and certification of Avionics systems on aircraft.

Must have a good knowledge of RTCA documents DO-178 and DO-160.

Must be familiar with part FAR25/525 certification process and with the ARP4754 standard.

Have an experience with civil aircraft and airworthiness authorities.

Are proficient with the use of Microsoft Office software tools to produce presentation and reports.

Have the ability to work well in a team environment.

Have strong communication skills (written and spoken).
 
Job Number: 2580
Job Location: Montreal, Canada
Rate: 58.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2581 - RELIABILITY, MAINTAINABILITY & SAFETY ENGINEER - cv, word doc only

Description:
Prepare reliability & safety studies, Failure Modes and Effects Analysis (FMEA), Aircraft Functional Hazard Analysis, Fault Tree Analysis and System Safety Analysis to certify modifications to the Challenger aircraft systems.

Participate in internal and external Design Reviews with Partners/Suppliers. You will be responsible for reviewing Partner%u2019s/Supplier%u2019s reports and ensure reliability & safety requirements are met.

Interface with various (Design Authorized Delegate) DAD disciplines Systems Engineering, Flight Sciences as part of the Integrated Design Team.

Interface with other internal and external customers (e.g. Airworthiness, Product Support, Marketing, Partners, and Certification Authorities).

Be involved with the maintenance engineering group to evaluate potential changes to certified maintenance tasks in conjunction with the DAD.

Evaluate potential modification/creation of Master Minimum Equipment List (MMEL) items with Transport Canada Civil Aviation (TCCA) and Federal Aviation Administration (FAA).

Prepare and present risk assessments for continued airworthiness queries.

Have at least 15 years of experience in the field of aircraft reliability/safety and in particular the following:

Creating and reviewing System safety assessments that meet the requirements of ARP4761.

Experience in evaluating in-service issues which are subject to safety.

Review and propose different certified maintenance task intervals for previously certified systems.

Experience with Continued Airworthiness Risk Assessments (CAA).

Experience in creating and proposing changes to the MMEL for TCCA and FAA.

Have experience in applied aerospace reliability engineering for mechanical and electrical components including reliability prediction.

Have completed various types of aircraft level assessments such as Particular risk analysis (rotor burst, tire burst) and zonal analysis.

Experience with ARP4754 is considered an asset.

Must be familiar with common reliability and safety processes and tools to perform the above mentioned tasks (e.g. Reliasoft, CAFTA.).

Experience with civil aircraft and civil airworthiness regulations is mandatory (TCCA, FAA, EASA).

Excellent comprehension and applied skills with FAR/JAR 25.1309 and all associated guidance material.

Good writing skills and communication skills in English is essential for the position.

Must possess the ability to work with minimum supervision and be a team player.

Must also be a person with initiative, a strong sense of responsibility and good engineering judgment.
 
Job Number: 2581
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Mechanics

Description:
STS Technical Services is hiring A&P Mechanic in Fort Worth, Texas!

Job Duties:
Perform required maintenance on company aircraft
Ensure all tasks assigned are completed in accordance with manufacturer’s manuals and FAA accepted or approved data
Adheres to all applicable FARs and Company policies and procedures outlined in the General Procedures Manual (GPM) and the Company’s,
FAA Approved Continuous Airworthiness Maintenance Program
Interpret aircraft technical manuals, and electrical drawings
Responsible for movement of aircraft in hangar and on ramp, including operation of tow-tractor
Maintain work area in a neat, clean and safe condition at all times
Perform only those tasks for which proper training and qualification has been obtained
Document On-the-job training (OJT) on from (T#004) for training received on tasks which Mechanic/Repairmen has not previously performed
Perform other duties as assigned
Qualifications:
Hold a Mechanic’s Certificate with Airframe and Powerplant ratings
Meet requirements of 14 CFR Part 65.83
Familiar with parameters and standards established specifically in Federal Aviation Regulations, Parts 53, 65 and 91
Familiar with basic inventory management functions
Strong interpersonal skills and ability to work harmoniously with others
Familiar with computer data entry, and Microsoft Windows based programs
Capable of lifting 75 lbs
Able to work flexible schedule to include day and night shifts
Willing to travel as needed
About STS Technical Services:
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 48131 / 44189
Job Location: Fort Worth, TX
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS Technical Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Mechanics

Description:
STS Technical Services is hiring A&P Mechanics in Bridgewater, Virginia!

Qualifications:
HS diploma or GED equivalent required; Computer Science or Scientific Technology discipline degree preferred
3 years’ of experience with machine or sheet metal practices, with 1 year of fabrication & instillation of parts required
4 years’ total experience in aviation maintenance experience plus civilian or military aviation technical school preferred, but not required
Must have A&P License
Three years’ experience minimum either within MRO, airlines, or line maintenance environment
Must have commercial aircraft experience (717, 737-400 through 737 – 900, 757, 767, DC9)
Dash8 experience preferred, but not required
ATR 72 or SAAB 349 experience preferred, but not required
About STS Technical Services:
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 49697
Job Location: Bridgewater, VA
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS Technical Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Mechanics

Description:
STS Technical Services is Hiring A&P Mechanics in Houston, Texas!

Job Duties:
Perform required maintenance on company aircraft
Ensure all tasks assigned are completed in accordance with manufacturer’s manuals and FAA accepted or approved data
Adheres to all applicable FARs and Company policies and procedures outlined in the General Procedures Manual (GPM) and the Company’s, FAA Approved Continuous Airworthiness Maintenance Program
Interpret aircraft technical manuals, and electrical drawings
Responsible for movement of aircraft in hangar and on ramp, including operation of tow-tractor
Maintain work area in a neat, clean and safe condition at all times
Perform only those tasks for which proper training and qualification has been obtained
Document On-the-job training (OJT) on from (T#004) for training received on tasks which Mechanic/Repairmen has not previously performed
Perform other duties as assigned
Qualifications:
Hold a Mechanic’s Certificate with Airframe and Powerplant ratings
Meet requirements of 14 CFR Part 65.83
Familiar with parameters and standards established specifically in Federal Aviation Regulations, Parts 53, 65 and 91
Familiar with basic inventory management functions
Strong interpersonal skills and ability to work harmoniously with others
Familiar with computer data entry, and Microsoft Windows based programs
Capable of lifting 75 lbs
Able to work flexible schedule to include day and night shifts
Willing to travel as needed
Must have a minimum of 2 years CRJ 200/700/900 experience
About STS Technical Services:
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 44337
Job Location: Houston, TX
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS Technical Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Mechanics

Description:
STS Technical Services is hiring A&P Mechanics in Minneapolis, Minnesota!

Job Description:
Inspect, test, repair, maintain, and service aircraft.
Read and interpret aircraft maintenance manuals and specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components
Modify aircraft structures, systems, or components, following drawings, engineering orders and technical publications
Perform visual inspections during assembly of part and after repair or installation of component.
Perform operational checks after maintenance is performed to ensure proper operation.
Examine, inspect and troubleshoot engine or other components for cracks, breaks, or leaks
Disassemble and inspect parts for wear, warping, or other defects
Assemble and install electrical, plumbing, mechanical, hydraulic, and structural components and accessories, using hand tools and power tools.
Adjust, align, and calibrate aircraft systems, using hand tools, gauges, and test equipment
Test engine and system operations, using testing equipment
Service and maintain aircraft systems.
Perform maintenance IAW FAA approved technical data
Research FAA technical data to locate applicable data relevant to assigned tasks
Other duties may be assigned
A&P Mechanic Job Requirements:
FAA Airframe and Powerplant license
Must have 3-5 years experience within commercial aviation
Must be able to read and write English and be able to comprehend and apply information contained in technical manuals
Must be able to document maintenance performed on required forms
Knowledge of design techniques, principles, tools and instruments involved in the production and use of precision technical plans, blueprints, drawings, and models
Must be able to use the FAA approved data proficiently. (i.e., IPC, AMM, OHM, SRM.)
Familiar with B737, B747, B757, B767, B777, MD88/90, DC-9 and A319/320 aircraft types and associated engines.
Practice safety conscious behaviors in all operational processes and procedures
High School Diploma or equivalent
Successfully complete a fingerprint-based Criminal History Records check prior to beginning work
Must meet the physical requirements which qualify a person to perform essential job functions including the ability to lift at least 70 pounds
Must be willing to work rotating or fixed shifts
A valid clear driver’s license
About STS Technical Services:
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 49021
Job Location: Minneapolis, MN
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS Technical Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Mechanics

Description:
STS Technical Services is hiring A&P Mechanics in Allentown, Pennsylvania.

Duties & Responsibilities:
Technicians working on aircraft, components or related parts of aircraft are responsible to perform work outlined on applicable work forms in accordance with airlines policies and procedures, manufacturer’s manuals and FAA requirements.
Overhaul, maintenance, and repair of airframe components, power plants, aircraft communication, navigation equipment, and associated components in accordance with airlines manuals, manufacturer’s manuals, bulletins, and orders.
Ensure that the appropriate tag is attached to all parts removed from an aircraft in accordance with Airlines policy.
The Technician, in performing his or her duties is required to be constantly alert for defective, worn or failed parts as well as safe working conditions.
Proper execution of an Airworthiness Release.
Responsible to sign for the accomplishment of work on applicable work forms and records.
A Technician, when qualified, may be required to perform the duties of Inspector in accordance with the Inspector job classification as described in the manual.
Responsible to keep the work area in a clean, safe and orderly manner.
Will be assigned to such housekeeping duties as policing his or her work and/or repair area as well as maintenance of company property.
Process all necessary paperwork as mandated by regulation.
Qualifications:
FAA certified Airframe and Powerplant (A&P) who perform direct maintenance in accordance with Airlines Continuous Aircraft Maintenance Program (CAMP).
Airbus GEN FAM’s “Highly preferred”
Must be authorized to work in the US as defined by the Immigration Act of 1986.
Must pass a Criminal Background Check.
High School Diploma/GEDValid Airframe & Powerplant Certification (A&P)
Minimum two (2) years of experience in aircraft maintenance for Part 121 environments.
Must have a valid Driver’s License and clean driving record.
Sponsorship is not available for this role.
Effective Communication skills, both verbal and written.
Proficiency with Microsoft Office Word and Outlook email.
Airbus experience and Airbus GEN FAMs.
About STS Technical Services:
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 49796
Job Location: Allentown, PA
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS Technical Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Painters

Description:
STS Technical Services is hiring Aircraft Painters in Lake Charles, Louisiana.

Duties & Responsibilities:
Works as direct labor on aircraft and is safety sensitive position.
Must be capable, and have mastery of, all processes associated with prepping and painting aircraft.
Ensure company Environmental Health and Safety policies are upheld.
Perform all aircraft painting processes on aircraft.
Aircraft stripping mastery.
Aircraft sanding mastery.
Aircraft masking mastery.
Aircraft painting mastery
Aircraft detail and mx markings mastery
Aircraft layout and sign-boards mastery
Report to work on time on scheduled shifts to work
Maintain 5S principles of Sorting, Systematic Arrangement, Shining, Standardizing and Sustaining with heavy emphasis on housekeeping of the aircraft maintenance bays, consumable point of use tables, tool room and paint mix areas
Qualifications:
Minimum of 2 years’ experience as an Apprentice Painter.
Candidates with 5 years+ commercial painting experience are considered master level painters.
Must be expert level boom lift and scissor lift operator.
Ability to travel as required.
Ability to read and write English.
About STS Technical Services:
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 49819
Job Location: Lake Charles, LA
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS Technical Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Painters

Description:
STS Technical Services is hiring Aircraft Painters in Kennesaw, Georgia.

Duties & Responsibilities:
Responsible for the finished Quality of parts and a limited number of frames.
Applies coats of paint to protect interior or exterior surfaces, of tractors and belt-loaders.
Selects premixed paints or mixes required portions of pigment, oil, thinning and drying substances to prepare paint that matches specified colors.
Paints surfaces and maintains spray equipment, spray gun and conventional spray gun and HVLP equipment.
Must have specific knowledge of paints (urethane and wash primers), thinners, spray guns, vic systems.
Knowledge of proper cleaning and rebuilding of guns, proper air pressures for product uses, understanding of work orders.
Occasionally required to operate air powered hand tools and common mechanics hand tools to perform some assembly operation essential functions.
Qualifications:
High School diploma or GED required 2 years related experience preferred
About STS Technical Services:
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 48481
Job Location: Kennesaw, GA
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS Technical Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Associate Engineer Tool / Catia NX CAD CA

Description:
166939
Associate Engineer Tool (Contract) (Job Number: 19032843)

Number of Openings: 1

Location(s): United States


Shift: 1st Shift

Target Start Date: Jan 6, 2020

Target End Date: Jan 1, 2021

Pay rate: $33.00
Number of openings: 1
Assignment Duration: Up to 1 year
Location: El Segundo, CA
Work schedule: 9/80

Aerospace Sector is looking for an Associate Tool Engineer I (contract) for tool design across multiple programs. Your work will play a critical role in the company’s mission of preserving freedom and advancing human discovery.

Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation’s history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We continue to innovate with developments from launching the first commercial flight to space, to discovering the early beginnings of the universe. Our employees are not only part of history, they’re making history.

In this role, the selected candidate designs industrial machinery and equipment, tools, dies, gauges, jigs, fixtures, and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements.


Basic Qualifications:

Bachelor's Degree in Science STEM (Science, Technology, Engineering, or Math)
CATIA/NX experience (or other CAD software)



Preferred Qualifications:

Proficiency with CATIA/NX or other CAD software
 
Job Number: JK-1816ATO
Job Location: El Segundo, CA
Rate: 33/hr max
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Technicians

Description:
STS Technical Services is hiring Avionics Technicians in Florence, South Carolina!

Qualifications:
Must have 5 years exp with Corp G/A
Beech 1900’s preferred for experience but not mandatory
5+ years Aviation Maintenance overall
A&P license required
About STS Technical Services:
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 48638
Job Location: Florence, SC
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS Technical Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Development Engineer - Android/Linux Application

Description:
Morson International is currently recruiting for a Development Engineer for a global organization specializing in biometric identity solutions. This is a fantastic opportunity for a Development Engineer to further their career and experience in the Biometric technology field with a large international company.
Job Description:
• Minimum of 2 years of experience in imaging software development in both Android and Linux system.
• We would like someone to join our team who is a strong verbal and written communicator, coachable, great technical troubleshooter and able to work multi-tasking and handle workloads under time constraints.
• As a Mobile Android/Linux Application Development Engineer for the Biometric R&D hardware team located in Pasadena, you will be a part of developing next generation biometrics hardware devices, including biometrics capture devices for fingerprint, palm print, facial and iris. You will be joining a collaborative environment focused on innovation and development of disruptive core technologies that secure the digital lives of millions of people.
• Conduct the research and development in the areas of biometrics mobile devices for biometrics identity information capture and search transaction.
• Responsible for designing and implementing the applications for biometrics hardware systems to achieve highest image quality requirement, form factor limitation, reliability requirement.
• Work with image processing specialists to design and implement the imaging system considering background removal, contrast enhancing, image rescaling in order to achieve the required image quality.
• Work with other firmware, software, optical, mechanical and industrial design engineers to formulate solutions to meet all final product requirements.
• Support products to internal and external customers for knowledge transfer, bug fixing, continuous evolution, as well as life cycle product management.
Skills:
• 3+ years of experiences
• Android applications, Embedded Linux software application development experiences.
• Working experiences using C, C++/C#, JAVA, Javascripts
• Xamarin platform development
• Service-oriented programming (SOA)
• Security software programing using SSL, TLS,
• Programming experiences on ARM processor and Digital Signal processor platform.
Desirable Skills:
• Security software and hardware experiences using PKI, AES/DES/SHA protocols
• Communication protocols such as TCP/UDP/IP, UART, SPI, I2C
• Peripheral device programming, USB, GPIO, Timers, Camera interface
• Apple iOS application (XCode) development
 
Job Location: Pasadena, CA
Rate: $70/hour
Per Diem: No
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: MORSON INTERNATIONAL
Attention: Philip Power
Address: 10800 GOSLING RD BOX 131565
City, State: SPRING, TX 77393
Phone: 713/636-2532
Fax Phone: 713/636-2523
Website: www.morsonusa.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Manufacturing Engineer

Description:
Electrical Manufacturing Engineer

Windsor Locks, CT
$36.50/hr
2 year W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

*Job Description
The ideal candidate will be creative, energetic, flexible, possess a positive attitude and be eager to apply and expand their engineering skills in a highly ethical manner while supporting the Integrated Product Development Team model in which he or she will have overall accountability to ensure products are manufactured to meet engineering requirements, program budgets, and program schedules through performing the following specific activities: Mentor Manufacturing Engineering associates on instilling a Design to Cost mind-set and work to stream line the delivery of manufacturing assembly documentation as well as its use by our lab personnel. Develop the specific methods and instructions for manufacture and/or assembly of products. Determine manufacturing feasibility to: Identify potential fabrication problems, Draw attention to special fabrication requirements and Ensure the latest developments in manufacturing technology are considered in the design phase. Establish design inherent cost targets which reflect hardware target cost.

The Manufacturing Engineer works with the design team to insure that the proposed design is within the allowable cost. Participate in cost proposals by estimating Manufacturing Engineering tasks, tooling costs and developing manufacturing plans. Establish touch labor cost targets on shop/lab activities as requested. Define tool and gage requirements. Provide the necessary input and support to the tool design group. Ensure adequate tools and gages are available when needed in the process. Work with the Manufacturing Control Planner to establish the schedule for all Manufacturing Engineering and Assembly efforts. Provide support to all activities during the fabrication of the initial unit (first article) of each specific design to resolve processing problems. Review and implement engineering changes to determine feasibility, producibility and delta cost impact. Determine, implement and lead process improvement opportunities, business unit initiatives and corrective actions. Lead efforts to understand non-conformances and reduce Cost of Poor Quality. Lead 3P events, Value Stream Mapping events, and the implementation of Process Certification.

*Education / Certifications
BS in Electrical Engineering, Manufacturing Engineering, Industrial Engineering or a Technology Degree. 7+ years of experience required.

*Experience/Qualifications
Experience in determining manufacturing methods and writing manufacturing assembly documentation in order to assemble high quality, highly engineered hardware. Background courses in electrical design and/or manufacturing are desired. Knowledge of Lean Manufacturing and special processing, such as IPC-J-STD-001E/ES, NASA-STD-8739.1, and/or NASA-STD-8739.4, is desirable. Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable
 
Job Number: 11794
Job Location: Windsor Locks, CT
Rate: 36.50
Per Diem: No
Overtime: Possible
Duration: 2
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Facilities Engineer II

Description:
*This is a full time, 9 month, contract position located in York, PA*



We are seeking a Facilities Engineer who can plan, design and coordinates facility renovations, layouts, equipment updates and utility support; may include modernization, maintenance and upgrading of plant electrical and mechanical systems, structures, architecture and interior finishes; ensures facilities compliance with OSHA, EPA, applicable codes (NEC, IBC, ADA) and local, state and federal codes and regulations.



The position requires working with managers and engineers and determining what the customer needs are (scope of the projects), creating a budget, estimating costs, bidding out the work, and completing the project ensuring project guidelines and building codes have been met.



Required:

* 2 years Facility Engineering experience

*Strong MS Office experience

*Good CAD software, preferably, using AutoCad
*This position requires daily interaction with union employees.

*4 year degree



Pluses:

*2 yrs AutoCAD 2017

*Industrial engineering degree

*Experience in negotiating with union employees.
 
Job Number: 094
Job Location: York, PA
Rate: 40.25
Per Diem: yes split
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Facility Operations Analyst / Electrician for commercial facilities - Clearance URGENT NC

Description:
165718 Job Title: Facility Operations Analyst

Work Site Address : Fort Bragg, NC 28303
Job Number: 1810-1
Max Pay Rate: 24.50/hr
Position Type: Contract
Desired Start Date: 12/9/2019
End Date: 6/9/2020


Job Summary:
Responsible for repairing and installing electrical systems in new industrial construction and maintaining electrical equipment and wiring. Must be able to identify, troubleshoot and repair problems in electrical wiring that occur in an industrial setting. Expected to be able to run tests, isolate problems, replace faulty sections of wiring, and lay conduit for the new electrical systems. Work well with public as well as with co-workers and willing to listen to others.

Performs tasks related to the overall management and operations of facilities, including energy management, material inventory, maintenance and construction. May oversee the repair, replacement or redesign of facilities, and preventive maintenance planning and scheduling. Implements the timely completion of requirements in compliance with Company programs, objectives and within established cost parameters. May monitor work performed by vendors and/or subcontractors; determines adequacy of work relative to job specifications/scope, and recommends corrective actions as required.

Qualifications and Education Requirements
Must have good math skills, as need to take measurements and work with numbers.
Must also be able to read blueprints. Should have good overall knowledge of all building electrical systems and electrical theory.
Requires lifting up to 55 pounds and moving it without assistance between building and across campus effectively and efficiently
Must have a journeyman electrical license.
Must be able to pass CRC Physical Assessment

Qty 1 position needed

In need of an Electrician for commercial facilities. Please ensure that the candidates are technically qualified. The candidate will be a worker (hands on) not a manager.
 
Job Number: JE-1810-1S
Job Location: Fort Bragg, NC
Rate: 24.50/hr max
Duration: 6 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Controls Engineer / F-16 experience is highly preferred / F-22 & F35 experience desired - Clearance CA

Description:
166860 Job Title: Flight Controls Engineer

Work Site Address: Palmdale, CA 93599
Job Number: 2648-1
Max Pay Rate: $85.00/hr
Start Date: 12/2/2019
End Date: 2/26/2021
Position Type: Contract

Job Summary:
Provide ground operations support for flight test planning, execution, and verification/validation of performance at the F-16 Combined Test Force (CTF). The applicant will also be expected to provide ground ops support at the F-22 & F35 CTF as needed. The applicant will team with US Air Force, contractor, and civil service engineers as part of an integrated test team for developmental and operational tests.

This position will serve as the principal focal point between aircraft maintenance and flight operations engineering personnel. He/she will
(1) the coordinate and direct the execution of pre-flight and post-flight activities to ensure aircraft test readiness,
(2) provide configuration control of aircraft software and hardware configurations to ensure that hardware, software, and instrumentation configurations are correct to meet test objectives,
(3) coordinate maintenance and logistic support for systems checkouts, flight operations, and anomaly troubleshooting, and
(4) coordinate as required with other organizations associated with test readiness.

This position will act as the principal focal point between maintenance, engineering and flight crew. Relays maintenance related aircraft constraints to the aircraft FTE's. Consult with management on changes or problems. Solve application and technical problems working collaboratively and independently with individuals from diverse technical disciplines and represent the organization frequent inter-organizational and outside customer contacts; Adapt to quickly changing tasks and requirements and learn new skills quickly.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS

Basic Qualifications
Broad experience with fighter aircraft flight test methods, aircraft maintenance, avionics maintenance and flight test instrumentation.
Experience in USAF maintenance activities and procedures, and T-2 modification processes.

Desired Skills
(F-16 experience is highly preferred / F-22 & F35 experience desired)
Broad knowledge of fighter aircraft flight test methods, aircraft maintenance, avionics maintenance and flight test instrumentation.
- Exceptional planning and coordinating skills are required.
- Ability to interface with all levels of project management is desired.
-Must have a strong customer focus, reinforced with excellent communication skills and interpersonal skill. Above average oral and written communication skills are desired.


Qty 4 positions

Swing shift, overtime, travel and weekend work may be required to support mission & staffing needs.
Work location is Edwards AFB
 
Job Number: JE-2648-1S
Job Location: Edwards AFB, CA
Rate: 85/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Control Engineer

Description:
Flight Test Control Engineer

Edwards Air Force Base, CA
$85/hr
15 month W2 contract
Swing Shift, 9/80
*MUST HAVE AN ACTIVE DOD SECRET CLEARANCE*

Description
This position is for a flight test control engineer at Edwards Air Force Base, CA to provide ground operations support for flight test planning, execution, and verification/validation of performance at the F-16 Combined Test Force (CTF). The applicant will also be expected to provide ground ops support at the F-22 & F35 CTF as needed. The applicant will team with US Air Force, contractor, and civil service engineers as part of an integrated test team for developmental and operational tests. This position will serve as the principal focal point between aircraft maintenance and flight operations engineering personnel. He/she will (1) the coordinate and direct the execution of preflight and post-flight activities to ensure aircraft test readiness, (2) provide configuration control of aircraft software and hardware configurations to ensure that hardware, software, and instrumentation configurations are correct to meet test objectives, (3) coordinate maintenance and logistic support for systems checkouts, flight operations, and anomaly troubleshooting, and (4) coordinate as required with other organizations associated with test readiness.
This position will act as the principal focal point between maintenance, engineering and flight crew. Relays maintenance related aircraft constraints to the aircraft FTE's. Consult with management on changes or problems. Solve application and technical problems working collaboratively and independently with individuals from diverse technical disciplines and represent the organization frequent inter-organizational and outside customer contacts; Adapt to quickly changing tasks and requirements and learn new skills quickly.
**Swing shift, overtime, travel and weekend work may be required to support mission & staffing needs.

**Must be a US Citizen. This position is located at a facility that requires special access.**

Basic Qualifications
Broad experience with fighter aircraft flight test methods, aircraft maintenance, avionics maintenance and flight test instrumentation.
Experience in USAF maintenance activities and procedures, and T-2 modification processes.
Must have an active/current Secret clearance.

Desired skills
*Swing shift, odd shifts, overtime, travel and weekend work may be required as needed.
- (F-16 experience is highly preferred / F-22 & F35 experience desired) Broad knowledge of fighter aircraft flight test methods, aircraft maintenance, avionics maintenance and flight test instrumentation.
- Exceptional planning and coordinating skills are required.
- Ability to interface with all levels of project management is desired. The applicant must have a strong customer focus, reinforced with excellent communication skills and interpersonal skill. Above average oral and written communication skills are desired.
 
Job Number: 11852
Job Location: Palmdale, CA
Rate: 85.00
Per Diem: Split Possible
Overtime: Possible
Duration: 15 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer

Description:
Industrial Engineer

Palmdale, CA
$75/hr
14 month W2 contract
First Shift, 9/80
*MUST HAVE AN ACTIVE SECRET CLEARANCE*

Description:
Analyzes and designs sequence of operations and work flow to improve efficiencies in plant and production facilities and equipment layouts; and establishes methods for maximum utilization of production facilities and personnel. May establish or assist in establishing accident prevention measures and may manage training programs for personnel concerning all phases of production operations. Conducts studies pertaining to cost control, cost reduction, inventory control, and production record systems. On the basis of these studies, develops and implements plans and programs for facility modifications and revisions to operating methods. May assist facilities engineers in the planning and design of facilities.
 
Job Number: 11593
Job Location: Palmdale, CA
Rate: 75.00
Per Diem: Possible
Overtime: Possible
Duration: 14 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer - Clearance CA

Description:
166412 Job Title: Industrial Engineer

Work Site Address : Palmdale, CA 93599
Job Number: 2070-1
Max Pay Rate: $75.00/hr
Start Date: 10/14/2019
End Date: 12/10/2020
Position Type: Contract


Job Summary:
Analyzes and designs sequence of operations and work flow to improve efficiencies in plant and production facilities and equipment layouts; and establishes methods for maximum utilization of production facilities and personnel.

May establish or assist in establishing accident prevention measures and may manage training programs for personnel concerning all phases of production operations. Conducts studies pertaining to cost control, cost reduction, inventory control, and production record systems. On the basis of these studies, develops and implements plans and programs for facility modifications and revisions to operating methods. May assist facilities engineers in the planning and design of facilities.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS

Skills: Category Name Required Importance Experience
Areas of Expertise Lean Manufacturing No 4
Areas of Expertise Project Scheduling No 7
Soft Skills Interpersonal Skills No 7
Software Skills MS Office - Intermediate Level No 4
Technical Skills Data Analysis No 6
Technical Skills Scheduling No 7
Technical Skills Trend Analysis No 3

Qty 4 positions
 
Job Number: JE-2070-1S6
Job Location: Palmdale, CA
Rate: 75/hr max
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer 2

Description:
Industrial Engineer 2

Location: Everett, WA
Duration: 6 months

Description:
Applies Industrial Engineering concepts, techniques, analysis and decision tools under general supervision to promote and assist in implementing changes in manufacturing, engineering and service operations. Assists in developing models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provides summary analysis and metrics for consultation to customers (e.g., management, departments, suppliers). Applies general industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements. Assist in research, design, development, improvement and implementation of processes to enhance schedule performance, lower cost, and improve quality, through the application of Lean and other Industrial Engineering concepts for large scale systems integration and asset utilization. Under general supervision, manages, defines, negotiates, and controls the scope, cost, and timing of projects, and performs risk analysis using project management tools (e.g., work break-down structure, precedence network, resource allocation). Provides support to project completion. Utilizes engineering methods (e.g., mathematical models, simulation, statistics) to support the development of optimal process designs and efficient utilization of resources (e.g., facilities, personnel, materials, equipment) in the creation and validation of products. Under general direction, analyzes and designs value stream, including capability, capacity (e.g., make/buy, supplier selection, risk analysis, supplier performance), throughput, workflow and logistics (e.g., critical path, lead-time, transportation, factory layout).

Education / Experience:
Typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 2 or more years' related work experience or an equivalent combination of technical education and experience (e.g. Master). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

Skill Code:
D26-Mfg Industrial Engrg.
 
Job Number: 19-15868
Job Location: Everett, WA
Per Diem: split
Overtime: possible
Duration: 6 months
Start Date: 12/10-19
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 859 STEPHENSON HWY
City, State: TROY, MI 48083
Phone: 843/955-9221
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer 3

Description:
Industrial Engineer 3

Location: Everett, WA
Duration: 6 Months

Job Description:
Applies advanced Industrial Engineering concepts, techniques, analysis and decision tools to promote and implement changes in manufacturing, engineering and service operations. Independently develops models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provides summary analysis and metrics for consultation to customers (e.g., management, departments, suppliers). Applies advanced industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements. Researches, designs, develops, improves, and implements processes to enhance schedule performance, lower cost, and improve quality, through the application of advanced Lean and other Industrial Engineering concepts for large scale systems integration and asset utilization. Independently manages, defines, negotiates, and controls the scope, cost, and timing of projects, and performs risk analysis using project management tools (e.g., work break-down structure, precedence network, resource allocation). Ensures project is completed within budget. Utilizes advanced engineering methods (e.g., mathematical models, simulation, statistics) to develop optimal process designs and efficient utilization of resources (e.g., facilities, personnel, materials, equipment) in the creation and validation of products. Analyzes and designs value stream, including capability, capacity (e.g., make/buy, supplier selection, risk analysis, supplier performance), throughput, work flow and logistics (e.g., critical path, lead-time, transportation, factory layout).

Education / Experience:
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 5 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD, Master+3 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

Skill Code: D26-Mfg Industrial Engrg


As an equal opportunity employer, ICONMA prides itself on creating an employment environment that supports and encourages the abilities of all persons regardless of race, color, gender, age, sexual orientation, citizenship, or disability.

Please share updated resume at ravi@iconma.com if interested.
 
Job Number: 19-12733
Job Location: Everett,, WA
Per Diem: Split Per-Diem available
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/234-6123
800 Phone: 866/914-9724
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer 4

Description:
Industrial Engineer 4

Location: Berkeley, MO
Duration:12 Months

Job Description: Leads the application of Industrial Engineering concepts, techniques, analysis and decision tools to promote and implement changes in manufacturing, engineering and service operations. Leads the development of models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provides expert analysis and metrics for consultation to customers (e.g., management, departments, suppliers). Leads in the application of extensive industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements. Leads the research, design, development, improvement, and implementation of processes to enhance schedule performance, lower cost, and improve quality, through the expert application of Lean and advanced Industrial Engineering concepts for large scale systems integration and asset utilization. Manages, defines, negotiates, and controls the scope, cost, and timing of projects, and direct the use of project management tools (e.g., work break-down structure, precedence network, resource allocation). Ensures project is completed within budget, and on schedule. Leads the use of engineering methods (e.g., mathematical models, simulation, statistics) to develop optimal process designs and efficient utilization of resources (e.g., facilities, personnel, materials, equipment) in the creation and validation of products. Leads the analysis and design of the value stream, including capability, capacity (e.g., make/buy, supplier selection, risk analysis, supplier performance), throughput, work flow and logistics (e.g., critical path, lead-time, transportation, factory layout). Preferred skills include experience with constraint based scheduling software and/or simulation software (Examples include Aurora and/or Simio)

Education / Experience: Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

Skill Code: D26-Mfg Industrial Engrg

As an equal opportunity employer, ICONMA prides itself on creating an employment environment that supports and encourages the abilities of all persons regardless of race, color, gender, age, sexual orientation, citizenship, or disability.

Please share updated resume at ravi@iconma.com if interested.
 
Job Number: 19-13283
Job Location: Berkeley,, MO
Per Diem: Split Per-Diem available
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/234-6123
800 Phone: 866/914-9724
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer II

Description:
Position Purpose:
• Under minimal supervision, provides Industrial Engineering support through the application of classical and Lean Industrial Engineering principles.
• Assures assigned projects are accomplished within projected or approved cost.

Unique Skills:
• This role requires Industrial Engineer experience.
• It will focus on hand tool control and repair, 5S/6S, cutting tool organization, and liaison with site facility team.

Principle Duties and Responsibilities:
• Conduct analysis with area Management and support staff to establish and maintain daily work activities.
• Conduct analysis with area Management, support staff and Material Control to design and maintain part presentation requirements and procedures.
• Identify equipment, machinery, and facilities acquisition including justifications and economic analysis to support operational, Safety and Quality initiatives.
• Development and maintain Tool Box requirements and contents to include tool control, FOD prevention measures tool requirements matched to area tasks.
• Apply 3D print capability to assist in resolution of technical issues (shop aids, Protect the Product, etc.).
• Provide business case analysis in support of projects to include make/buy, MCR, Engineering Changes, Tooling requests.
• Support all Safety, Sustainability and Ergonomic initiatives as required.
• Develop and Implement plant layout, process flow, and material handling techniques.
• Support area Management in generating orders/requests for Tooling including management of tool priorities.
• Investigate, evaluate, and implement facilities expansions, department rearrangements, new technologies and manufacturing techniques, and employee suggestions.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of IE policies and procedures.
• With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
• Develop and maintain work place methods and manpower requirements.
• Assist in the training and development of entry-level industrial engineering personnel.
• As required, aid in development and maintenance of Business Continuity Plan. Perform other duties as assigned.

Education and Experience Requirements:
• Bachelor's Degree in Industrial, Manufacturing Engineering or related curriculum or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen (18) months Industrial Engineering, Manufacturing Engineering, Operations Engineering or related technical experience.

Other Requirements:
• Proven knowledge of Lean and/or Six Sigma principles.
• Ability to influence across functional disciplines.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Demonstrated ability to operate computerized equipment, such as personal computers, CATIA, etc.
• Lean Specialist certification or higher preferred.
 
Job Number: 24-365
Job Location: Tulsa, OK
Rate: $52.50/hr
Per Diem: YES
Overtime: YES
Duration: 1+Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineering Manager

Description:
Required:
• Engineering Degree
• Industrial Engineering background
• Either a Green Belt, or Black Belt in Lean/Six Sigma Practices
• Experience with “cost out”, process improvement, lean processes, analytical background.
• Must have experience managing/leading groups of 8+ Industrial Engineers.
• Must have an aerospace background
• Will consider someone who has lead experience from larger companies leading groups of 8 plus engineers, but would prefer someone with management experience.


Job Description
Summary Statement: Plans, directs and coordinates activities of an industrial engineering department in the utilization of facilities, equipment, materials and personnel to improve efficiency of operations relative to the production of components, parts, systems and subsystems of operational aircraft. Possesses extensive knowledge of department processes and manages subordinate staff in the day-to-day performance of their jobs to ensure that project and/or department milestones and goals are met and adhering to approved budgets.




The Structures Company is an AA/EOE.
 
Job Number: 353
Job Location: Tulsa, OK
Rate: $100-$130K **DOE***
Duration: DIRECT POSITION
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial electrician

Description:
Direct hire opportunities for maintenance technicians to work within a manufacturing company. To be considered candidates must have been at their last job for a minimum of 1 year and no more than 2 jobs in the last 18 months.

12 hour shifts 6am-6pm and 6pm - 6am with A, B, C & D shifts Shift differentials are paid for 2nd shift.

A&B are Sunday - Wednesday

C&D are Wednesday - Saturday



1. Maintain and/or repair Low to High Voltage electrical power distribution systems and electronic components of industrial machinery and equipment on a regular preventative maintenance schedule. In depth ability to trouble shoot 24v Circuits

2. Trouble shoot, replace/repair electrical components of machinery including but not limited to: PLC's, VFD's, Contacts, Relays etc.

3.Ability to read and interpret Electrical schematics, parts diagrams and operating procedures pertaining to industrial electrical equipment.

4. Complete quality documentation of repairs, work orders and preventative maintenance performed on all equipment and machinery.

5. Ability to use a variety of electrical tools safely and accurately including but not limited to: Multimeters, Meggers, Circuit tracers, Fish tape's, Conduit benders, terminal crimpers etc.

Marginal Job Functions: Operating mobile equipment such as forklift trucks, boom lifts and scissor lifts. Welding and fabrication skills are a plus but not required for the maintenance electrician position and can be taught on the job.



Experience/Background: Experience with PLC's, VFD's, Time delay sensors, Photo eyes, Boilers, Chiller pumps, compressed air systems, Driven conveyor belts, High and low voltage service panels. Residential and industrial electrical circuits.







Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.


 
Job Number: 19-47270
Job Location: Phoenix, AZ
Rate: 58968.0USD/Year
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-11-15 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Camille Hannes
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Maintenance Controllers

Description:
STS Technical Services is hiring Aircraft Maintenance Controllers in Estero, Florida!

We are a premiere staffing agency providing high-paying contract and direct-hire employment opportunities. We’d love to partner with you to help you take your career to new heights. Check out the following information about this incredible employment opportunity we have right now with a great client of ours.

Job Summary:
Shall positively support and promote safety, security and quality as a fundamental function of the overall responsibility
Alert down-line and other out-stations to secure emergency maintenance that will cover unforeseen maintenance problems and ensure the proper arrangements are made for timely repairs
Monitor aircraft maintenance operations and provide technical assistance to ensure all repairs are completed in accordance with company and Federal Aviation Regulations and maintain safety and on-time operation of flight schedules
Maintain continuous liaison with NCC, providing current and continuing reports of the general mechanical status of the entire fleet and coordinating maintenance requirements during irregular operations to minimize extra costs and disruptions
Ensure all inoperative systems are operated and maintained in accordance with the Minimum Equipment List (MEL), Configuration Deviation List (CDL) or other WGA approved deferrals, and take necessary measures taken to correct these items
Ensure the timely repair of all aircraft with a repetitive history, soliciting or requesting any additional technical information necessary, and directing actions to be taken to minimize cost and unnecessary part replacement
Ensure control of the DI and CI logs in accordance with the correct MEL usage
Issue control numbers and expiration dates to field personnel, and ensure that proper tracking is maintained
Coordinate as necessary with other maintenance areas to ensure availability of required components, parts, and/or troubleshooting expertise to expedite maintenance and repair of aircraft at maintenance base or at down-line stations
Coordinate ferry flights with all concerned departments
Notify appropriate management personnel in the event of an incident or accident, in accordance with instructions in the Emergency Response Manual
Notify the Manager of Manager of Maintenance Control of any situation or practice not within Maintenance Manual requirements that could compromise safety or add unnecessary costs to the maintenance department
Review all faxed or e-mailed log pages for accuracy and compliance with GMM chapter 7
Identifying and entering mechanical interruptions in the electronic maintenance tracking program
Qualifications:
FAA A&P certificate
Minimum 1 year MX controller experience
Minimum 5 years MD11 and/or B747-400 experience
Willing to relocate to Estero, FL
Good communication skills
About STS Technical Services:
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 49890
Job Location: Estero, FL
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS Technical Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer

Windsor Locks, CT
$25/hr
1 year W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
The ideal candidate will be creative, energetic, flexible, possess a positive attitude and be eager to apply and expand their engineering skills in a highly ethical manner while supporting the Integrated Product Development Team model in which he or she will have overall accountability to ensure products are manufactured to meet engineering requirements, program budgets, and program schedules through performing the following specific activities:

Mentor Manufacturing Engineering associates on instilling a Design to Cost mind-set and work to stream line the delivery of manufacturing assembly documentation as well as its use by our lab personnel. Develop the specific methods and instructions for manufacture and/or assembly of products.

Determine manufacturing feasibility to: Identify potential fabrication problems, Draw attention to special fabrication requirements and Ensure the latest developments in manufacturing technology are considered in the design phase. Establish design inherent cost targets which reflect hardware target cost. The Manufacturing Engineer works with the design team to insure that the proposed design is within the allowable cost. Participate in cost proposals by estimating Manufacturing Engineering tasks, tooling costs and developing manufacturing plans. Establish touch labor cost targets on shop/lab activities as requested. Define tool and gage requirements. Provide the necessary input and support to the tool design group. Ensure adequate tools and gages are available when needed in the process. Work with the Manufacturing Control Planner to establish the schedule for all Manufacturing Engineering and Assembly efforts.

Provide support to all activities during the fabrication of the initial unit (first article) of each specific design to resolve processing problems. Review and implement engineering changes to determine feasibility, producibility and delta cost impact. Determine, implement and lead process improvement opportunities, business unit initiatives and corrective actions. Lead efforts to understand non-conformances and reduce Cost of Poor Quality. Lead 3P events, Value Stream Mapping events, and the implementation of Process Certification.

Education / Certifications
BS in Electrical Engineering, Manufacturing Engineering, Industrial Engineering or a Technology Degree. 5+ years of experience required. *

Experience/Qualifications
Experience in determining manufacturing methods and writing manufacturing assembly documentation in order to assemble high quality, highly engineered hardware. Background courses in electrical design and/or manufacturing are desired. Knowledge of Lean Manufacturing and special processing, such as IPC-J-STD-001E/ES, NASA-STD-8739.1, NASA-STD-8739.4, is desirable. Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable.
 
Job Number: 11562
Job Location: Windsor Locks, CT
Rate: 25.00
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Manager

Description:
Nesco Resource is seeking a Manufacturing Manager of Facilities and Maintenance will have responsibility for facilities repair and maintenance and the supervision of employees in the Maintenance Department. While maintaining the facility, he or she will comply with all environmental, health and safety regulations. This position reports directly to the VP of Operations.



Location: Saginaw, Michigan

 

Job Descriptions:  




  • Comply with environmental, health and safety laws and regulations

  • Act as backup to the EH&S Manager 

  • Supervise, direct, schedule work and develop employees in the Maintenance Department

  • Hold employees accountable for quality and quantity of work

  • Develop training for employees

  • Plan and execute a preventive maintenance program

  • Conduct maintenance audits throughout the facility

  • Travel as necessary, including internationally

  • Work with all levels of internal personnel to achieve goals

  • Work with operations management to schedule machine and building maintenance and repair activities

  • Abide by the collective bargaining agreement, upholding contractual and work rules

  • Oversee all facility contracts together with the Purchasing Dept. for building and property maintenance and repair

  • Negotiate contracts with vendors and service providers

  • Develop and sustain positive vendor and service provider relationships

  • Achieve cost savings targets

  • Work a flexible schedule to include weekends and call-ins

  • Utilize problem solving methods to identify root cause and implement meaningful and effective corrective measures

  • Participate in planning and executing lean manufacturing events in the facility

  • Due to project planning and emergency situations, must be able to work a flexible schedule, including weekends, call-ins and extended hours. 


 Job Requirements:


  • BS degree preferred

  • Minimum 3 years’ experience in facilities management

  • Working knowledge of plant power systems, including, but not limited to primary switch gear, secondary switch gear and distribution system and plant systems; i.e. water towers, air compressors, heat treating, hydromation, waste treatment and process boiler, as well as the respective controllers

  • Experience with precision machining, industrial automation and CNC machines

  • Experience supervising in a unionized environment

  • Experience with the maintenance and repair of machine tools

  • Must be able to perform the physical requirements of the job including (but not limited to) walking, standing, bending, stooping, twisting, turning, reaching, grasping, ladder climbing, stair climbing, reading, speaking and lifting up to 50 pounds.

  • Excellent communication and presentation skills

  • Self-motivated team player

  • Hands on approach, willing to “roll up the sleeves”

  • Demonstrated leadership ability

  • Due to our status as a defense contractor, must be a US  Citizen


Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-26802
Job Location: Saginaw, MI
Rate: 75000.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-06-28 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: David Wayne
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Process Engineer

Description:
Nesco Resource is recruiting a Metal Stamping Process Engineer with at least 5-7 year's experience to join our client in Winsted, CT. The Metal Stamping Process Engineer will plan and establishes sequence of operations to stamp parts and to promote efficient utilizationlead; recommend methods for improving utilization of of personal, materials and utilities manage; prepare reports for management review of maintenance operating system metrics, major issues and root cause report and initiate new continuous improvement projects. The Metal Stamping Process Engineer will also be responsible to lead and develop new shop floor layouts. The ideal Metal Stamping Process Engineer will have a strong knowledge of stamping and progressive stamping, lean tools and concepts and Kaizen events. AutoCAD preferred.



Required:

Bachelors of Science in Industrial Engineering or Manufacturing Engineering or Mechanical Engineering

Metal Stamping

Minimum 5-7 year's experience



Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-44946
Job Location: Winsted, CT
Rate: 88000.0USD/Year
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-12-23 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Michael Moritz
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Safety Support Engineer

Description:
****MUST be a U.S. Citizen****

COPS Management (required):
Work with Propulsion Systems Product Safety Manager (PSM) to understand and pro-actively manage the propeller product line entries into the Control of Process and Safety (COPS) database.
1. Review Product Safety Review Board (PSRB) approved COPS inputs, enter into COPS tool and track / facilitate through release process.
2. Examine engineering drawings prior to release to ensure alignment between proposed drawing changes and PSRB approved drawing mark-ups.
3. Provide targeted COPS searches and extracts on request.

PSRB / PSI support (required):
1. Assist with finalizing meeting minutes, coordinating drafting with contractor and final review and approval with the Product Safety Manager Check and update potential safety issue (PSI) and AI databases in coordination with Propulsion Systems PSRB minutes drafting and finalization.
2. Perform database queries to support issue management decisions at PSRB and requests from presenters.
3. Guide engineers in developing required documentation for safety part approval at the PSRB using product safety management processes and standard work.

RRCA Team support (additional potential tasks):
1. Assist in coordination of root cause corrective analysis project by task planning, AI tracking and management, and fault tree development.

Safety Risk Analysis (additional potential tasks):
1. Support ongoing needs for Continued Airworthiness Assessment Methodology (CAAM) statistically-based analyses to inform the Propulsions Systems PSRB and the Collins PSB in potential safety issue management decisions for Propellers issues.
2. Work with investigation teams to identify information required for generating risk models for potential safety issues.
3. Construct models to assess risk using Continued Airworthiness Assessment Methodology (Ref. FAA AC39.8)-consistent techniques for unaddressed / uncorrected issues and to evaluate effectiveness of possible Corrective Action Plans.
4. Research historical data to support severity hazard ratio development.
5. Work with statistician to resolve modeling issues.
6. Develop and interpret the models and perform peer reviews to ensure the highest possible analysis integrity.

Required Experience / Qualifications:
1. BS degree with 2+ years’ experience in industrial or aerospace engineering environment.
2. Excel and database processes and management.
3. Engineering drawing notations and familiarity.

Additional Beneficial Experience:
1. Engineering change control processes
2. Critical characteristic identification and management
3. Basic statistics and risk analysis
4. Ability to use Minitab tool for Weibull analysis
5. Systems engineering / reliability engineering

Additional Comments:
1. A desire to understand the relationship of how propeller hardware manufacture and servicing is controlled to ensure the safety of our customers and the flying public is essential.
2. Some experience with Aerospace systems / operation understanding is desirable.
3. Experience with fault tree, Failure Modes and Effects Analysis, and Failure Hazard Analysis methods is a plus.
 
Job Number: 11779
Job Location: Windsor Locks, CT
Rate: $72.42/HR
Per Diem: No
Overtime: Possible
Duration: 2 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Production Planner

Description:
Production Planner

Windsor Locks, CT
$39.88/hr
2 year W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
The position is the focal point for the execution of daily activities to deliver high quality, highly engineered development and production hardware on-time to its customers. The selected candidate will be responsible for the timely performance of various manufacturing tasks ranging from requirements planning through the shipment of deliverables in support of NASA and DoD Programs. Applicants must exhibit a high degree of initiative and sound judgment, working independently and as a member of an Integrated Product Team. It is essential the individual be capable of adapting to changing conditions and work cooperatively in a team environment.

Specific responsibilities include:
o Interface with cross-functional IPD to ensure schedules are adhered to with proper sense of urgency to achieve customer delivery requirements
o Monitor production schedules and advance materials through assembly and test operations
o Proactively identify and mitigate risks associated with the execution of production plans
o Release production orders, compile historical build folders, and assemble hardware kits in support of 100% on-time starts
o Coordinate the utilization of outside processes and the shipment of hardware to customers
o Conduct root cause analysis when goals are not met and initiate corresponding corrective actions
o Initiate and support process improvement initiatives. o Understand and interpret ERP system requirements and accurately integrate complex production schedules

*Experience/Qualifications:
o Associate's /Bachelor's Degree preferred.
o Experience in Operations Management, Supply Chain Management, Industrial Engineering, Electrical Engineering, or Mechanical Engineering disciplines preferred Experience in Planning, Supply Chain, Procurement, Manufacturing, Operations, or a related field
o Self-directed
o Strong planning and organization skills with ability to be adaptable to changing priorities and assignments
o Manage daily tasks and come back with solid results / solutions
o Ability to read engineering drawings
o Ability to communicate effectively and persuasively, verbally and in writing, to individuals at all levels and to cross-functional groups
o Knowledge of ACE and/or Lean Six Sigma is encouraged.
 
Job Number: 11385
Job Location: Windsor Locks, CT
Rate: 39.88
Per Diem: No
Overtime: Possible
Duration: 2 years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Assurance Engineer

Description:
Description
Develops, modifies, applies and maintains quality evaluation and control systems and protocols for processing materials into partially finished or finished materials product. Collaborates with engineering and manufacturing functions to ensure quality standards are in place. Devises and implements methods and procedures for inspecting, testing and evaluating the precision and accuracy of products and production equipment. Designs and analyzes inspection and testing processes, mechanisms and equipment; conducts quality assurance tests; and performs statistical analysis to assess the cost of and determine the responsibility for, products or materials that do not meet required standards and specifications. Audits quality systems for deficiency identification and correction. Ensures that corrective measures meet acceptable reliability standards and that documentation is compliant with requirements. May specialize in the areas of design, incoming material, production control, product evaluation and reliability, inventory control and/or research and development as they apply to product or process quality. May be certified in lean and six-sigma quality engineering methodologies.
Skill/Experience/Education
Mandatory
Bachelors or Masters degree preferably in Industrial Engineering, Electrical Engineering, Aerospace Engineering, Mechanical Engineering, or related discipline from an accredited college. This position will be located at a facility that requires special access and requires the selected candidate to be a US Citizen.
Desired
Electronic subassembly, CCA experience, Cable and Harness experience Understanding of root cause analysis and corrective action Manufacturing techniques Strong written and oral communication skills Proficient skill level with Microsoft Office applications: Word, Excel, PowerPoint, etc. Ability to work independently and as a team player
 
Job Location: Ocala, FL
Rate: 50/hr
Per Diem: Split
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Sanjay Khatri
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Robotic Maintenance Technician

Description:
Plant 2 Maintenance Personnel Body Machining

  • Working knowledge of automated industrial machinery.

  • Basic understanding of electricity.

  • Working knowledge of hydraulic and pneumatic systems. (Repair, replace and rebuild)

  • Ability to read mechanical blueprints and schematics.

  • Basic knowledge of PLC.

  • Some experience with FANUC robots a plus.

  • Ability to replace reed switches and amplifiers.

  • Ability to troubleshoot complex electrical systems using voltmeters and electrical schematics.

  • Ability to troubleshoot pumps, motors, bearings, ball screws, conveyers, blowers and repair/replace (if necessary).

  • Ability troubleshoot, install and setup Mitsubishi VFD (Variable Frequency Drives).

  • Ability to work 12-hour shifts.

  • Self-starter and team player.




Plant 4 Maintenance Personnel - Assembly


  • Basic understanding of electricity.

  • Working knowledge of automated industrial machinery.

  • Knowledge of Keyence vision and barcode reading systems.

  • Knowledge of IMAJE inkjet printing systems.

  • Knowledge of SATO label printers.

  • Knowledge of the following robot systems:

    • FANUC (6-axis) w/ vision (cameras).

    • Yamaha (Cartesian) 3-axis.

    • Toshiba (Cartesian) 3-axis.



  • Knowledge of INFICON leak detectors.

  • Knowledge of automated feeding systems.

  • Working knowledge of PLC's.

  • Working knowledge of electronic sliders.

  • Ability to troubleshoot complex electrical systems using voltmeters and electrical schematics.

  • Ability to troubleshoot and repair pneumatic valves and cylinders.

  • Ability to troubleshoot repair/replace reed switches and amplifiers.

  • Ability to work 12-hour shifts.

  • Self-starter and team player.


Body Machining Maintenance Technicians:

1. Basic knowledge of PLC. Should not be confused when a control panel is opened. Regardless of machine specifics, should be able to identify various elements.

2. Ability to troubleshoot, repair, replace, and rebuild automated industrial machinery.

3. Ability to troubleshoot, repair, replace, and rebuild hydraulic and pneumatic systems.



Assembly Maintenance Technicians

1. Good, working knowledge of PLC. Should not be confused when a control panel is opened. Regardless of machine specifics, should be able to identify various elements, and troubleshoot problems.

2. Ability to troubleshoot, repair, replace, and rebuild automated industrial machinery.

3. Experience troubleshooting and repairing robot systems (FANUC 6-axis with vision cameras, Yamaha Cartesian 3-axis, Toshiba Cartesian 3-axis).





Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-33220
Job Location: Dallas, TX
Rate: 30.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2019-12-31 00:00:00.0
Start Date: 2019-11-04 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Nico Spirito
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Engineer - Cockpit Display Systems - China.

Description:
Senior Engineer - Cockpit Display Systems - China.

Our client requires a Senior Engineer to support the design and development of their new Cockpit Displays System for Civil Aircraft.

We seek Engineers with strong knowledge and experience of working on modern cockpit display systems. Good knowledge of ARINC 661. The selected Engineer must be prepared to work in China. They must be a good communicator and will be an important part of our Client's team.

Role duties and Responsibilities:

:

  •  Technical lead to define a competitive CDS solution, update plans and process for a new part 25 civil program.
  • Experience on ARINC 661 standard, A661 server and widget design (including requirement and architecture) for cockpit display system.
  • Interface with customers and act as a technical domain expert on Display eco-system.
  • Provide supplier oversight and technical issues resolution with existing CDS program.
  • Support the establishment/update of sound system/module requirements capture and development processes, system design process, methods and concepts.
  • Document related technical data of assigned projects in conformance with engineering policies and procedures.
  • Conduct architecture activities at appropriate system/module levels.
  • Integrate processes across functional areas to improve coordination and maximize efficiency.
  • Help to make significant decisions and recommendations on complex issues to achieve long-term results and strategic objectives.
  • Execute design, analysis, and evaluation of assigned projects adhering to business standards, practices, procedures, and product/program requirements, manage corresponding project schedules and costs.
  • Provide training to engineers on system design process, methods and concepts.

 
Job Number: BH-218-1
Job Location: China, China
Rate: Contract hourly rate negotiable in US$
Per Diem: --
Overtime: --
Start Date: 10/24/2019
Input Date: 11/14/2020
Firm Name: STRONGFIELD TECHNOLOGIES INC
Attention: Graham Bird
Address: 1200 MCGILL COLLEGE AVE STE 1100
City, State: MONTREAL, PQ H3B 4G7
Country: CANADA
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Engineer - Cockpit Display Systems - China.

Description:
Senior Engineer - Cockpit Display Systems - China.

Our client requires a Senior Engineer to support the design and development of their new Cockpit Displays System for Civil Aircraft.

We seek Engineers with strong knowledge and experience of working on modern cockpit display systems. Good knowledge of ARINC 661. The selected Engineer must be prepared to work in China. They must be a good communicator and will be an important part of our Client's team.

Role duties and Responsibilities:

:

  •  Technical lead to define a competitive CDS solution, update plans and process for a new part 25 civil program.
  • Experience on ARINC 661 standard, A661 server and widget design (including requirement and architecture) for cockpit display system.
  • Interface with customers and act as a technical domain expert on Display eco-system.
  • Provide supplier oversight and technical issues resolution with existing CDS program.
  • Support the establishment/update of sound system/module requirements capture and development processes, system design process, methods and concepts.
  • Document related technical data of assigned projects in conformance with engineering policies and procedures.
  • Conduct architecture activities at appropriate system/module levels.
  • Integrate processes across functional areas to improve coordination and maximize efficiency.
  • Help to make significant decisions and recommendations on complex issues to achieve long-term results and strategic objectives.
  • Execute design, analysis, and evaluation of assigned projects adhering to business standards, practices, procedures, and product/program requirements, manage corresponding project schedules and costs.
  • Provide training to engineers on system design process, methods and concepts.

 
Job Number: BH-218
Job Location: China, China
Rate: Contract hourly rate negotiable in US$
Per Diem: --
Overtime: --
Start Date: 11/22/2019
Input Date: 11/14/2020
Firm Name: STRONGFIELD TECHNOLOGIES INC
Attention: Graham Bird
Address: 1200 MCGILL COLLEGE AVE STE 1100
City, State: MONTREAL, PQ H3B 4G7
Country: CANADA
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior MMIC/RFIC Design Engineer (Electrophysics Engr/Scien 5)

Description:
Senior MMIC/RFIC Design Engineer (Electrophysics Engr/Scien 5)

Location: El Segundo, CA
Duration: 12 months

Description:
Position Responsibilities:
- Design and development projects for state-of-the art MMIC/RFIC electronics for communication systems and space-based applications.
- Design responsibilities for high power, high efficiency MMIC power amplifiers.
- Activities and duties will include RF circuit design, requirements and interface definition, modeling and analysis, hands-on testing, performance and design verification.
- Solve anomalies that occur during integration and test, as well as support external sub-contractors in development of articles to be delivered to the Satellite Development Center.
- This position will report to the manager of Microelectronics in the Space Electronics Capability organization.

Basic Qualifications:
- Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry
- Industrial experience designing and delivering custom MMICs and/or RFICs to production programs.
- Experience in the design and delivery of high efficiency, high linearity power amplifiers required.
- Experience designing custom MMICs in Gallium Arsenide (GaAs) and Gallium Nitride (GaN) semiconductor technologies.

Preferred Qualifications (Desired Skills/Experience):
- Demonstrated technical experience in the field of RF electronics and MMIC/RFIC circuit design.
- Additional experience in the design of RF systems or subsystems and the ability to decompose RF system requirements to MMIC and RFIC requirements is desired.
- Experience with RF/MMIC circuit design in SiGe RFIC components.
- Experience in ECAD tools; including Microwave Office or ADS, Ansys HFSS, Sonnet, and Axiem, etc.
- Experience in non-linear FET modeling and load-pull measurements.
- Experience Microwave/millimeter-wave and Printed Circuit Board design (PCB) and Microwave packaging.

Education / Experience:
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 14 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+9 years' related work experience, Master+12 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

Skill Code: 64Z-Radio Frequency Microwave

As an equal opportunity employer, ICONMA prides itself on creating an employment environment that supports and encourages the abilities of all persons regardless of race, color, gender, age, sexual orientation, citizenship, or disability.

Please share updated resume at ravi@iconma.com if interested.
 
Job Number: 19-15425
Job Location: El Segundo, CA
Per Diem: Split Per-Diem available
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/234-6123
800 Phone: 866/914-9724
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Project Architect

Description:

Nesco Resource is partnering with a national architectural firm in its search for a Sr. Project Architect for its Latham location. Our client is grounded yet progressive and offers competitive compensation and benefits!



Candidates should come with 8-10 years of experience in architectural CAD production and document coordination. In this role, you will be developing and executing architectural design work for both public and private clients .You will also coordinate the efforts of both in-house and outside teams who handle structural engineering, MEP design, civil and environmental engineering services. We're looking for an enthusiastic go-getter who is just as comfortable managing the work as they are interfacing with clients.



Job Responsibilities




  • Makes decisions and recommendations that are recognized as authoritative and have an important impact on extensive architectural activities.

  • Ability to demonstrate creativity, foresight and mature architectural judgment in anticipating and solving challenging architectural problems.

  • Determine project objectives and requirements.

  • Develop standards and guidelines for diverse architectural activities.

  • Determine compliance with technical documents and industry specific standards and codes.

  • Involved in the analysis of client problems in conceiving and developing architectural solutions to those problems.

  • Manage, coordinate and mentor staff and project level employees.

  • Manage all aspects of client relations including attending meetings.

  • Perform other like duties as assigned.



Education and Qualifications




  • 10+ years of architectural design experience.

  • Extensive knowledge of Architectural Design.

  • Exceptional knowledge of AutoCAD, Revit and other BIM software.

  • The ability to work and thrive in a team environment.

  • Knowledge of project specifications & CSI division formatting.

  • Strong organizational, time management & multitasking skills.

  • Excellent communication skills both oral and written.

  • Proficiency in Photoshop, Sketch-Up, and Microsoft Office.

  • Bachelor's degree in Architecture highly desired.

  • Professional RA, desired.

  • Architecture enrollment in NCARB IDP preferred.

  • LEED certification a plus.














Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-38618
Job Location: Latham, NY
Rate: 125000.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-09-17 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Henry Hunn
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stability and Control Engineer

Description:
Summary
As the Senior Stability & Control Engineer you will report to the VP of Flight Sciences and be responsible for providing detailed stability and control analysis and input to the design of the business jet.

On any given day you might:
Independently address stability and control related issues throughout the vehicle design and test process
Develop aerodynamic databases needed for Stability and Control
Identify Stability and Control issues and propose solutions
Support flight control laws group and the development of aircraft flight control laws
Develop requirements for low and high-speed wind tunnel tests
Support S&C wind tunnel tests from planning through execution and final reports
Provide hinge moment data based on CFD and wind tunnel tests
Provide input for control surface sizing, deflection angles, and rates
Contribute to the development of aircraft stability and control requirements that are compatible with civil certification standards (FAR25/CS25)
Provide inputs to developmental and FAA-approved flight manuals including normal handling characteristics and emergency procedures
Support stability and control flight testing

We're looking for someone who has:
A BS in Aeronautics or Aerospace Engineering with more than 6 years of experience (or MS in engineering plus 4 years of experience)
Experience with the latest industry-standard stability and control and aerodynamic design and analysis tools such as MATLAB/SIMULINK and vortex-lattice tools
Experience working with CFD experts to generate data required for stability and control analyses
Prior experience performing trade studies related to stability and control including using numerical tools as well as wind tunnel data
Experience in the creation of aerodynamic stability and control databases
Knowledge of, and experience with, FAA FAR 25 and EASA CS 25 stability and control regulatory requirements and means of compliance
Experience with flight and wind tunnel test monitoring and data reduction to support stability and control analysis and certification efforts
Familiarity in generating documentation to support certification efforts
 
Job Number: 42-036
Job Location: Reno, NV
Rate: D.O.E.
Per Diem: YES
Overtime: Possible
Duration: 1+ Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Staff Structural Analysis Engineer / 2nd shift / Nastran Patran FEM analysis DaDT - no clearance CA

Description:
167042 Staff Structural Engineer (Job Number: 19035635 or 19035638)

Number of Openings: 2

Location(s): United States-California-Palmdale


Shift: 2nd Shift

Target Start Date: Mar 16, 2020

Target End Date: Mar 12, 2021

Pay Rate: $80 to $85/hr

Work Schedule: 4/10 - 2nd Shift

Duration of Assignment: Up to 1 year

2 Openings

Successful candidate will be a member of the F-35 Center Fuselage IPT, supporting the assembly of the Center Fuselage at Northrop Grumman's Palmdale Manufacturing Center. Candidate should be experienced in structural analysis methods, including large NASTRAN models, of metallics and advanced composite structures. Desired skills include familiarity with detailed analysis procedures, FEM analysis, PATRAN, layout sizing, structural integrity evaluations, durability and damage tolerance (DaDT) of aircraft structures, material allowables development, acoustic/dynamic evaluations, and weight control. Responsible for liaison support as well as analysis of parts and installation of these parts in the JSF Center Fuselage. Experience should include the development and first-hand assembly line support of aircraft structural parts and assemblies (launch vehicle experience considered) utilizing metallic/composite materials.

Basic Qualifications:

Bachelors Degree plus 14 years of experience in Aerospace, Mechanical, or Civil Engineering or Masters Degree plus 12 years years experience.


Preferred Qualifications:

Previous experience in structural analysis of fighter aircraft structures preferred
 
Job Number: JK-1828
Job Location: Palmdale, CA
Rate: 80-85/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis-Stress/DADT/Dynamics/FEA/FEM - no clearance GA

Description:
166195 Job Title: Structural Analysis-Stress/DADT/Dynamics/FEA/FEM

Work Site Address: Marietta, GA 30063
Job Number: 2003-1
Max Pay Rate: $58.73/hr
Start Date: 9/23/2019
End Date: 9/22/2020
Position Type: Contract

Job Summary:
This job is for a Senior Level Structural Strength (Stress) Analyst for the Air Mobility and Maritime Missions program supporting the C-130, LM-100J, C-5, and P-3 aircraft responsible for performing stress analysis on new and modified designs to validate that positive margins of safety exist for all failure modes under all operational and design criteria loading conditions.

Job entails conducting strength analyses for primary and secondary structure and mechanisms, providing support to production during airframe manufacture, and substantiation of structural repairs for fielded aircraft.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS
This individual must have a significant amount of experience conducting classical hand analysis of aircraft structure for various failure modes. Proficiency with FEA codes such as Nastran/Patran, StressCheck, and APEX is a plus. Individual must have strong interpersonal and communication skills. They must be capable of interpreting detail, assembly, and installation drawings. Basic qualification is a bachelor's degree from an accredited college in civil, mechanical, aerospace, or aeronautical engineering.


Skills: Category Name Required Importance Experience
Software Skills Finite Element Analysis (FEA) No 2 4 - 6 Years
Technical Skills Stress Analysis Yes 1 6 + Years

Qty 1 position needed
 
Job Number: JE-2003-1
Job Location: Marietta, GA
Rate: 58.73/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Strength (Stress) Analyst

Description:
Location: Marietta, GA
Rate: $60.00/HR
Duration: 1 year contract
Per Diem Split: Yes (if eligible)
Overtime: Possible (x1.5)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****

Job Description:
1. This job is for a Senior Level Structural Strength (Stress) Analyst for the Air Mobility and Maritime Missions program supporting the C-130, LM-100J, C-5, and P-3 aircraft responsible for performing stress analysis on new and modified designs to validate that positive margins of safety exist for all failure modes under all operational and design criteria loading conditions.
2. Job entails conducting strength analyses for primary and secondary structure and mechanisms, providing support to production during airframe manufacture, and substantiation of structural repairs for fielded aircraft.
3. This individual must have a significant amount of experience conducting classical hand analysis of aircraft structure for various failure modes.
4. Proficiency with FEA codes such as Nastran/Patran, StressCheck, and APEX is a plus.
5. Individual must have strong interpersonal and communication skills.
6. They must be capable of interpreting detail, assembly, and installation drawings.
7. Basic qualification is a bachelor's degree from an accredited college in civil, mechanical, aerospace, or aeronautical engineering.

Education:
1. Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 11187
Job Location: Marietta, GA
Rate: $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Strength (Stress) Analyst

Description:
Location: Marietta, GA
Rate: $60.00/HR
Duration: 1 year contract
Per Diem Split: Yes (if eligible)
Overtime: Possible (x1.5)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****

Job Description:
1. This job is for a Senior Level Structural Strength (Stress) Analyst for the Air Mobility and Maritime Missions program supporting the C-130, LM-100J, C-5, and P-3 aircraft responsible for performing stress analysis on new and modified designs to validate that positive margins of safety exist for all failure modes under all operational and design criteria loading conditions.
2. Job entails conducting strength analyses for primary and secondary structure and mechanisms, providing support to production during airframe manufacture, and substantiation of structural repairs for fielded aircraft.
3. This individual must have a significant amount of experience conducting classical hand analysis of aircraft structure for various failure modes.
4. Proficiency with FEA codes such as Nastran/Patran, StressCheck, and APEX is a plus.
5. Individual must have strong interpersonal and communication skills.
6. They must be capable of interpreting detail, assembly, and installation drawings.
7. Basic qualification is a bachelor's degree from an accredited college in civil, mechanical, aerospace, or aeronautical engineering.

Education:
1. Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 11446
Job Location: Marietta, GA
Rate: $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Strength (Stress) Analyst - Structural Analysis-Stress/DADT/Dynamics/FEA/FEM - no clearance GA

Description:
165671/1801-1
Senior Level Structural Strength (Stress) Analyst
Work Location: Marietta, GA
Status: Open

Qty: 1
Desired Start Date: 8/19/2019
End Date: 8/28/2020

Job Description:
This job is for a Senior Level Structural Strength (Stress) Analyst for the Air Mobility and Maritime Missions program supporting the C-130, LM-100J, C-5, and P-3 aircraft responsible for performing stress analysis on new and modified designs to validate that positive margins of safety exist for all failure modes under all operational and design criteria loading conditions. Job entails conducting strength analyses for primary and secondary structure and mechanisms, providing support to production during airframe manufacture, and substantiation of structural repairs for fielded aircraft. This individual must have a significant amount of experience conducting classical hand analysis of aircraft structure for various failure modes. Proficiency with FEA codes such as Nastran/Patran, StressCheck, and APEX is a plus. Individual must have strong interpersonal and communication skills. They must be capable of interpreting detail, assembly, and installation drawings. Basic qualification is a bachelor's degree from an accredited college in civil, mechanical, aerospace, or aeronautical engineering.

Work Location: Marietta, GA
Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
Pay Rate: $58.73 Hourly

Software Skills Finite Element Analysis (FEA) No 2 4 - 6 Years
Technical Skills Stress Analysis Yes 1 6 + Years
 
Job Number: JE-1801-1
Job Location: Marietta, GA
Rate: 58.73/hr max
Per Diem: pd split possible
Duration: 12 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Supply Chain Ops Coordinator CA

Description:
Supply Chain Ops Coordinator (Job Number: 19028585)

Number of Openings: 1

Location(s): United States-California-El Segundo


Shift: 2nd Shift

Target Start Date: Oct 5, 2019

Target End Date: Oct 5, 2020

Pay rate: $20.00 - $23.00
Number of openings: 1
Assignment Duration: Up to 1 year
Location: El Segundo
Work schedule: 5/40 - Second shift


•Maintain schedules for material requirements and availability for the manufacture of industrial and commercial products to support production control.


•Compile records concerning quantity, cost, and type of material received, shipped, in stock or inventory, and/or in production.


•Expedite flow of materials, parts, and assemblies within or between departments in accordance with production and shipping schedules.


•Assist in determining possible and actual shortages may initiate action to correct these deficiencies.


•Use knowledge of production, procurement, and engineering departments to alert proper authorities regarding potential problems and appropriate remedial action.


•Estimate and log production rate and time expenditures and may be required to establish sequence and lead time of each operation to meet shipping dates.

Deliver stock or inventory to the manufacturing floor and/or supplies to business areas


Basic Qualifications:



•High School Diploma and
2 years additional education and/or related experience.

•Microsoft Office knowledge.


•Strong Excel background.


•Knowledge of SAP/R3 or similar ERP software.


•General understanding of continuous process improvement.


•Must be able to obtain a Secret Clearance.


•Ability to frequently move and position objects weighing up to 40 lbs.


•Must be able to move stock/inventory/materials around the manufacturing floor and various business units.



Preferred Qualifications:




•Bachelors with 3 years related experience.


•Knowledge of manufacturing work flow and MRP systems or similar.


•Ability to work in a fast paced environment.


•Experience in electronics manufacturing is a plus.
 
Job Number: JK-1806ATO
Job Location: El Segundo, CA
Rate: 20-23/hr max
Duration: 12 months
Start Date: 2nd Shift
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
Systems Engineer

Chula Vista, CA
$40.25/hr
1 year W2 contract
First Shift
Possible Travel
*MUST BE A U.S. CITIZEN OR PERMANENT RESIDENT*
**NO RELOCATION COMPENSATION**

Description:
Manages systems integration, technical design, model based design, systems analysis for supportability and effectiveness of technological systems, systems analysis for safety of system, systems research, systems verification or validation planning, architecture development, and requirements for commercial, industrial and governmental purposes. Integrates system activities to support the aforementioned tasks. Integration and analysis applies to the greater systems, interfaces between the systems and subsystems, and systems and components.

Additional:
Responsible for requirements management and supplier design oversight. Will be responsible for managing design responsible suppliers to ensure compliance to Aerostructures technical requirements while keeping project within allocated cost and schedule. Requires individual with strong technical skills with experience managing projects with little oversight.

Bachelors Degree required
 
Job Number: 11451
Job Location: Chula Vista, CA
Rate: 40.25
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years. The most recent investigation completed within the last 5-years****

Job Description:
Responsible for the design, development and implementation of equipment, tools, dies, gauges, jigs, fixtures, industrial machinery, prototype model production and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements. Comprehensive understanding and wide application of engineering and technical principles, theories and concepts will be expected. Determines, provides and develops technical solutions to a wide range of difficult problems unique to each program assigned, with minimum direction or supervision.

Basic Qualifications:
- Minimum of 8-years of demonstrated professional Tool Design experience.
- MUST BE proficient in CATIA-V5 Generative Shape, Part, Assembly & Drafting workbenches.
- Proficient in the use of GD&T.
- Comprehensive knowledge and experience in aircraft tool design and fabrication, including composite lay-up and large assemblies.
- MS-Office proficient.
- Must be US citizen.
- MUST HAVE Active/Final Secret clearance with most recent investigation completed within the last 5-years.

Desired:
- CATIA-V4 or V6 experience.
- Experience in structural analysis.
- Experience working in a fast paced, developmental environment.

Education:
- Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 11582
Job Location: Palmdale, CA
Rate: $85.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last two (2) years with most recent investigation completed within the last 5-years****

Job Description:
1. Responsible for the design, development and implementation of equipment, tools, dies, gauges, jigs, fixtures, industrial machinery, prototype model production and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements.
2. Comprehensive understanding and wide application of engineering and technical principles, theories and concepts will be expected.
3. Determines, provides and develops technical solutions to a wide range of difficult problems unique to each program assigned, with minimum direction or supervision.

Basic Qualifications:
1. Minimum of 8-years of demonstrated professional Tool Design experience.
2. Proficient in CATIA-V5 Generative Shape, Part, Assembly & Drafting workbenches.
3. Proficient in the use of Geometric Dimensioning and Tolerancing.
4. Comprehensive knowledge and experience in aircraft tool design and fabrication, to include metallic and composite materials, composite cure, trimming, drilling, machining, forming, welding, assembly and inspection.
5. Must be US citizen.
6. Active/Final Secret clearance with most recent investigation completed within the last 5-years.

Desired:
1. Comprehensive knowledge and experience in the production of aircraft and related tooling to include; metallic and composite materials, composite cure, trimming, drilling, machining, forming, welding, assembly and inspection.
2. Significant CATIA-V4 experience.
3. Experience in structural analysis and proficient in material selection/sizing.
4. Experience in electro-mechanical/pneumatic/hydraulic systems design.
5. Experience working in a fast paced, developmental environment.
6. Experience writing technical reports and presenting technical data.
7. MS-Office proficient.

Education:
1. Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 11430
Job Location: Fort Worth, TX
Rate: $56.05/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Designer / Catia V5 - Clearance CA

Description:
166408 Job Title: Tool Design

Work Site Address: Palmdale, CA 93599
Job Number: 2012-1
Max Pay Rate: $75.00/hr
Start Date: 9/17/2019
End Date: 9/11/2020
Position Type: Contract

Job Summary:
Determines, provides and develops technical solutions to a wide range of difficult problems unique to each program assigned, with minimum direction or supervision.

Responsible for the design, development and implementation of equipment, tools, dies, gauges, jigs, fixtures, industrial machinery, prototype model production and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements. Comprehensive understanding and wide application of engineering and technical principles, theories and concepts will be expected.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS
Basic Qualifications:
- Minimum of 8-years of demonstrated professional Tool Design experience.
- MUST BE proficient in CATIA-V5 Generative Shape, Part, Assembly & Drafting workbenches.
- Proficient in the use of GD&T.
- Comprehensive knowledge and experience in aircraft tool design and fabrication, including composite lay-up and large assemblies.
- MS-Office proficient.

Desired:
- CATIA-V4 or V6 experience.
- Experience in structural analysis.
- Experience working in a fast paced, developmental environment.

Preferred Skills
Skills: Category Name Required Importance Experience
Software Skills Catia Yes 9 6 + Years

Qty 4 positions

Applicants must not have applied for Tool Design at LM- in the last 6-mo.
 
Job Number: JE-2012-1S5
Job Location: Palmdale, CA
Rate: 75/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Welder

Description:
Nesco Resource is hiring a Welder for a prominent Manufacturing Company located in the Danbury, CT area.



Under general supervision, the welder/pipe fitter is responsible for assembling and installing piping systems, pipe supports, and hydraulic and pneumatic equipment. Installs pipe for steam, hot water, heating, cooling, lubricating and industrial production and processing systems. They will also be responsible for welding as it pertains to industrial burners, piping systems ranging from 1/2” to 12” and other fuel oil or steel plate assemblies.



Required Qualifications:



  • Minimum education requirement: HS graduate or GED.

  • Minimum 1-2 years' experience in manufacturing or industrial setting.

  • Must be capable of interpreting blueprints, fabricating and welding to specifications.

  • Must be able to perform job in safe manner and produce a quality product.

  • Must successfully complete weld tests, which passes both visual and X-ray testing when needed.

  • Forklift certified 





This Position is Monday - Friday, 7:00 am - 3:00 pm It is a Right to Hire/ Temp to hire position.

The pay is from $20.00 - $ 30.00/hr depending on experience.


 
Job Number: 19-48642
Job Location: Danbury, CT
Rate: 30.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2020-04-30 00:00:00.0
Start Date: 2020-01-30 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Rebecca Seidel
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

Back to Advanced Job Search