Description :Assemble, install, seal, rig, inspect, and complete precision and other structural and system components, working from drawings, documents, process specifications, quality control requirements, and established processes and procedures. Functional test and correct, fit form and function of assemblies and components.1. Obtain required information from prints, charts, sketches, work instructions, documents, verbal and electronic information.2. Use shop mathematics and precision measuring and or test instruments to complete work assignments and functional test assemblies andcomponents.3. Utilize tooling in the assembly of components into sub-assemblies or end items.4. Verify work performed is per work instructions and meets process and/or engineering specification. Identify discrepancies found per applicable procedure.5. Ensure equipment and tool certification occurs per procedure.6. Perform routine minor machine maintenance as part of their daily work duties (e.g., where applicable, replacing machine filters, changing standard light bulbs on machines and equipment, maintaining lubrication/coolant levels, etc. as related to basic Total Preventative Maintenance duties).7. Routinely move product within the immediate manufacturing work area, including across isle, using shop assigned equipment as required, and complete transactions necessary to move product to the next operation. On an exception basis, move product to the next operation within abuilding.8. Perform work within allotted schedules.9. Support the continuous flow of product within the manufacturing process by training and assisting employees at all classificationlevels.10. Assist in the training of other assembly personnel in assembly, installation and inspections techniques.11. Cross trains in inspection and becomes SIA qualified. Level C Employee must have the skill and knowledge to perform in all of the general functions of the Assembly Mechanic listed below: Assembly/Installation Structures Sub Assembly Sealer Requirements:
787 rework - composite mechanics (preferably), if they have a structures background it would be helpful as well. MUST be willing to have the flexibility to be in either South Carolina or Washington (and likely switch between both locations). Spirit will schedule/pay for flights Pay rate, per diem, reimbursement of hotel/rental vehicle. Training will take place in Wichita, KS or in Renton, WA (TBD)

Description :Assemble, install, seal, rig, inspect, and complete precision and other structural and system components, working from drawings, documents, process specifications, quality control requirements, and established processes and procedures. Functional test and correct, fit form and function of assemblies and components.
Duties
The Company will provide appropriate assistance in job training to enable employees to perform all necessary job functions including the following:
1. Work with blueprints, changes, specifications, work orders, etc. to assemble and install to quality requirements parts and assemblies.
2. Complete required data gathering transactions to facilitate assembly progression.
3. Setup and perform all manual and automated assembly operations, and portable machine functions required to accomplish assignments.
4. Perform any and all required pickup, rework, fabrication, change incorporation, functional testing or check during or after final assembly and/or assembly progression.
5. Move and/or obtain correct parts, materials, tools, assemblies, etc.
6. Use precision measuring instruments required to accomplish work assignments.
7. Report and/or investigate job handicaps such as: errors in parts, assembly procedures, tools, sequences, etc.
8. Perform routine minor machine maintenance as part of their daily work duties (e.g., where applicable, replacing machine filters, changing standard light bulbs on machines and equipment, maintaining lubrication/coolant levels, etc. as related to basic Total Preventative Maintenance duties).
9. Routinely move product within the immediate manufacturing work area, including across isle, using shop assigned equipment as required and complete transactions necessary to move product to the next operation. On an exception basis, move product to the next operation within a building.
10. Support the continuous flow of product within the manufacturing process by training, coaching and assisting employees of all classification levels.
11. Document any discrepancies according to specification, process, and procedure.
12. Cross trains in inspection and becomes SIA qualified.

Sealer - Seal parts, assemblies and sub-assemblies fillet and fay, apply leveling compound or scotch cast etc.
Pressure / Vacuum Test - Perform visual and auditory leak checks in aircraft sections
Precision Bench Assembly - Assemble precision aircraft parts and assemblies such as landing gear, control linkage etc.
Sub-Assembly - Assemble parts to make sub assemblies using templates, jigs, and fixtures
Assembly / Installation Structures - Assemble structural parts, assemblies, and skins to make larger assemblies
Assembly / Installation Doors - Pre- assemble, trim, fit , rig , seal, align, and adjust aircraft door systems
Integral Fuel Cell - Apply sealing compounds to seal fuel cell and wing section components
Inspection - Inspect and document non conformances on final assemblies, subassemblies, systems, and installations
Verifies dimensions of parts using both mechanical and electronic measurement tools and, relative to these inspection duties, initiate and document corrective action for programming issues and other problems.
Setup and operate conventional and Computerized Numerical Controlled (CNC) fastening equipment, similar to Multi-Task Gantry Riveter's (MTGR's), Brotje's , C-Frames, IPAC's etc., to assemble components in accordance with engineering specifications, Requirements:

These resources need to be proficient at skin disassembly and reassembly on finished airplanes

Per current policy, resource will have to be fully compliant with COVID vaccine requirement by 01/04/2022

LOCAL to the Area, Strongly Preferred.
MUST BE able to work any shift.

Description :Assemble, install, seal, rig, inspect, and complete precision and other structural and system components, working from drawings, documents, process specifications, quality control requirements, and established processes and procedures. Functional test and correct, fit form and function of assemblies and components.
Duties
The Company will provide appropriate assistance in job training to enable employees to perform all necessary job functions including the following:
1. Work with blueprints, changes, specifications, work orders, etc. to assemble and install to quality requirements parts and assemblies.
2. Complete required data gathering transactions to facilitate assembly progression.
3. Setup and perform all manual and automated assembly operations, and portable machine functions required to accomplish assignments.
4. Perform any and all required pickup, rework, fabrication, change incorporation, functional testing or check during or after final assembly and/or assembly progression.
5. Move and/or obtain correct parts, materials, tools, assemblies, etc.
6. Use precision measuring instruments required to accomplish work assignments.
7. Report and/or investigate job handicaps such as: errors in parts, assembly procedures, tools, sequences, etc.
8. Perform routine minor machine maintenance as part of their daily work duties (e.g., where applicable, replacing machine filters, changing standard light bulbs on machines and equipment, maintaining lubrication/coolant levels, etc. as related to basic Total Preventative Maintenance duties).
9. Routinely move product within the immediate manufacturing work area, including across isle, using shop assigned equipment as required and complete transactions necessary to move product to the next operation. On an exception basis, move product to the next operation within a building.
10. Support the continuous flow of product within the manufacturing process by training, coaching and assisting employees of all classification levels.
11. Document any discrepancies according to specification, process, and procedure.
12. Cross trains in inspection and becomes SIA qualified.

Sealer - Seal parts, assemblies and sub-assemblies fillet and fay, apply leveling compound or scotch cast etc.
Pressure / Vacuum Test - Perform visual and auditory leak checks in aircraft sections
Precision Bench Assembly - Assemble precision aircraft parts and assemblies such as landing gear, control linkage etc.
Sub-Assembly - Assemble parts to make sub assemblies using templates, jigs, and fixtures
Assembly / Installation Structures - Assemble structural parts, assemblies, and skins to make larger assemblies
Assembly / Installation Doors - Pre- assemble, trim, fit , rig , seal, align, and adjust aircraft door systems
Integral Fuel Cell - Apply sealing compounds to seal fuel cell and wing section components
Inspection - Inspect and document non conformances on final assemblies, subassemblies, systems, and installations
Verifies dimensions of parts using both mechanical and electronic measurement tools and, relative to these inspection duties, initiate and document corrective action for programming issues and other problems.
Setup and operate conventional and Computerized Numerical Controlled (CNC) fastening equipment, similar to Multi-Task Gantry Riveter's (MTGR's), Brotje's , C-Frames, IPAC's etc., to assemble components in accordance with engineering specifications, Requirements:

MRO Experience is a MUST. These resources need to be proficient at skin disassembly and reassembly on finished airplanes.

(Hotel & Car Rental will be reimbursed, while training in Renton, for those who qualify)

MUST be LOCAL to the Area

MUST BE able to work any shift.

Description :Assemble, install, seal, rig, inspect, and complete precision and other structural and system components, working from drawings, documents, process specifications, quality control requirements, and established processes and procedures. Functional test and correct, fit form and function of assemblies and components.
Duties
The Company will provide appropriate assistance in job training to enable employees to perform all necessary job functions including the following:
1. Work with blueprints, changes, specifications, work orders, etc. to assemble and install to quality requirements parts and assemblies.
2. Complete required data gathering transactions to facilitate assembly progression.
3. Setup and perform all manual and automated assembly operations, and portable machine functions required to accomplish assignments.
4. Perform any and all required pickup, rework, fabrication, change incorporation, functional testing or check during or after final assembly and/or assembly progression.
5. Move and/or obtain correct parts, materials, tools, assemblies, etc.
6. Use precision measuring instruments required to accomplish work assignments.
7. Report and/or investigate job handicaps such as: errors in parts, assembly procedures, tools, sequences, etc.
8. Perform routine minor machine maintenance as part of their daily work duties (e.g., where applicable, replacing machine filters, changing standard light bulbs on machines and equipment, maintaining lubrication/coolant levels, etc. as related to basic Total Preventative Maintenance duties).
9. Routinely move product within the immediate manufacturing work area, including across isle, using shop assigned equipment as required and complete transactions necessary to move product to the next operation. On an exception basis, move product to the next operation within a building.
10. Support the continuous flow of product within the manufacturing process by training, coaching and assisting employees of all classification levels.
11. Document any discrepancies according to specification, process, and procedure.
12. Cross trains in inspection and becomes SIA qualified.

Sealer - Seal parts, assemblies and sub-assemblies fillet and fay, apply leveling compound or scotch cast etc.
Pressure / Vacuum Test - Perform visual and auditory leak checks in aircraft sections
Precision Bench Assembly - Assemble precision aircraft parts and assemblies such as landing gear, control linkage etc.
Sub-Assembly - Assemble parts to make sub assemblies using templates, jigs, and fixtures
Assembly / Installation Structures - Assemble structural parts, assemblies, and skins to make larger assemblies
Assembly / Installation Doors - Pre- assemble, trim, fit , rig , seal, align, and adjust aircraft door systems
Integral Fuel Cell - Apply sealing compounds to seal fuel cell and wing section components
Inspection - Inspect and document non conformances on final assemblies, subassemblies, systems, and installations
Verifies dimensions of parts using both mechanical and electronic measurement tools and, relative to these inspection duties, initiate and document corrective action for programming issues and other problems.
Setup and operate conventional and Computerized Numerical Controlled (CNC) fastening equipment, similar to Multi-Task Gantry Riveter's (MTGR's), Brotje's , C-Frames, IPAC's etc., to assemble components in accordance with engineering specifications, Requirements:

These resources need to be proficient at skin disassembly and reassembly on finished airplanes

Aiming for training to take place in Renton on 11/8/21
LOCAL to the Area, Strongly Preferred.
MUST BE able to work any shift

Description Assemble, install, seal, rig, inspect, and complete precision and other structural and system components, working from drawings, documents, process specifications, quality control requirements, and established processes and procedures. Functional test and correct, fit form and function of assemblies and components. Duties
The Company will provide appropriate assistance in job training to enable employees to perform all necessary job functions including the following:
1. Work with blueprints, changes, specifications, work orders, etc. to assemble and install to quality requirements parts and assemblies.
2. Complete required data gathering transactions to facilitate assembly progression.
3. Setup and perform all manual and automated assembly operations, and portable machine functions required to accomplish assignments.
4. Perform any and all required pickup, rework, fabrication, change incorporation, functional testing or check during or after final assembly and/or assembly progression.
5. Move and/or obtain correct parts, materials, tools, assemblies, etc.
6. Use precision measuring instruments required to accomplish work assignments.
7. Report and/or investigate job handicaps such as: errors in parts, assembly procedures, tools, sequences, etc.
8. Perform routine minor machine maintenance as part of their daily work duties (e.g., where applicable, replacing machine filters, changing standard light bulbs on machines and equipment, maintaining lubrication/coolant levels, etc. as related to basic Total Preventative Maintenance duties).
9. Routinely move product within the immediate manufacturing work area, including across isle, using shop assigned equipment as required and complete transactions necessary to move product to the next operation. On an exception basis, move product to the next operation within a building.
10. Support the continuous flow of product within the manufacturing process by training, coaching and assisting employees of all classification levels.
11. Document any discrepancies according to specification, process, and procedure.
12. Cross trains in inspection and becomes SIA qualified.

Sealer - Seal parts, assemblies and sub-assemblies fillet and fay, apply leveling compound or scotch cast etc.
Pressure / Vacuum Test - Perform visual and auditory leak checks in aircraft sections
Precision Bench Assembly - Assemble precision aircraft parts and assemblies such as landing gear, control linkage etc.
Sub-Assembly - Assemble parts to make sub assemblies using templates, jigs, and fixtures
Assembly / Installation Structures - Assemble structural parts, assemblies, and skins to make larger assemblies
Assembly / Installation Doors - Pre- assemble, trim, fit , rig , seal, align, and adjust aircraft door systems
Integral Fuel Cell - Apply sealing compounds to seal fuel cell and wing section components
Inspection - Inspect and document non conformances on final assemblies, subassemblies, systems, and installations
Verifies dimensions of parts using both mechanical and electronic measurement tools and, relative to these inspection duties, initiate and document corrective action for programming issues and other problems.
Setup and operate conventional and Computerized Numerical Controlled (CNC) fastening equipment, similar to Multi-Task Gantry Riveter's (MTGR's), Brotje's , C-Frames, IPAC's etc., to assemble components in accordance with engineering specifications, Requirements:These resources need to be proficient at skin disassembly and reassembly on finished airplanes
Aiming for a training start date in Wichita on 01/10/2022
Candidates must be fully Vaccinated by 01/04/2022
Candidate has to undergo 10 years of background check, which supplier will have to conduct once offered/accepted.

LOCAL to the Area, Strongly Preferred.

MUST BE able to work any shift.

In this role, you will be using your skills and expertise to develop highly complex designs. These cover a very wide range, from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. You'll create and review layouts, drawings, and models for clarity, completeness, and accuracy. You'll identify design errors, omissions, and other deficiencies, and recommend revisions and/or improvements in designs

Must-haves:

Bachelor's Degree in a related field of study and typically 3 or more years of relevant experience

A higher level degree may substitute for experience

Related experience may be considered in lieu of required education

Understanding of engineering principles and practices

Experience with Computer Aided Engineering tools

Ability to work in multi-disciplinary design and development teams

Preferred:

Experience using SOLIDWORKS, Creo, NX, ProEngineer, AutoCAD, CATIA or Enovia 3Dxperience software.

Working knowledge of ASME and Government standards.

Background in the Aerospace & Defense Industry.

Prior experience applying and interpreting Geometric Dimensioning and Tolerancing (GD&T) per ASME Y14.5

Knowledge of industry-standard design principles, to include, but not limited to parametric design, model-based definition, material hardware and or electrical component selection, fabrication, manufacturing, and production processes

Familiarity with Electro-Magnetic Effects (EME) to include, Electro Magnetic Compatibility (EMC) and Electro-Magnetic Interference (EMI)

Experience in digital and analog circuit layout and schematic capture

Understanding of the printed circuit board layout process and tools

IMPORTANT NOTICE:

To conform to U.S. Government international trade regulations, applicant must be a U.S. Citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State or U.S. Department of Commerce.

This is a very exciting opportunity to work with one of the world's largest aerospace companies!

The contracts are regularly extended and direct opportunities are often available.

JOB DESCRIPTION SUMMARY
Follows general instructions, reads and interprets complex blueprint drawings and specifications to set-up and machine items to fabricate out of sequence emergent production parts as required using manual and CNC machines. Develops and revises Machine Control Data (MCD) and geometry. Assists the team in resolving issues and completing job responsibilities.

DESIRED COMPETENCIES
Accountability and Responsibility
Demonstrates a willingness to accept responsibility and accountability for one's actions. Exhibits a moral, legal or mental accountability in areas of responsibility.

Adaptability
Maintains effectiveness when experiencing major changes in work tasks or the work environment; adjusts effectively to work within new work structures, processes, requirements, and/or cultures.

Change Management
Encourages others to seek opportunities for different and innovative approaches to addressing problems and opportunities; facilitates the implementation and acceptance of change within the workplace.

Continuous Improvement
Originates action to improve existing conditions and processes; uses appropriate methods to identify opportunities, implements solutions, and measures impact.

Continuous Learning
Demonstrates an interest in personal learning and development. Seeks feedback from multiple sources about how to improve and develop; modifies behavior based on feedback or self-analysis of past mistakes. Takes steps to develop and maintain the knowledge, skill, and ability to perform.

Innovation / Creativity
Discovers new opportunities and solutions for problems by looking beyond current practices and using innovative thinking. Tries different and novel ways to deal with work problems and opportunities.

Planning and organizing
Effectively plan what is to be achieved and involve all relevant stakeholders. Anticipate important or critical events, identifying resource requirements and assigning responsibility for specific work, including deadlines and performance expectations. Demonstrate the use of information -gathering techniques, analyzing situations and identifying implications in order to make correct decisions. Demonstrate ability to monitor progress and to make changes as required.

Strategic Decision Making
Obtains information and identifies key issues and relationships relevant to achieving a long-range goal or vision; commits to a course of action to accomplish a long-range goal or vision after developing alternatives based on logical assumptions, facts, available resources, constraints, and organizational values.

Teamwork
Demonstrates a commitment to the mission and motivation to combine the team's energy and expertise to achieve a common objective. Understands the dynamics of effective teamwork in order to attain higher levels of performance. Demonstrates ability to work as a member of a team.

DESIRED TECHNICAL COMPETENCIES
Adhesive Materials/Processes
Knowledge of adhesive materials (such as epoxy, urethane, polyimide, reinforcements, etc) and processes.

Knowledge
Knowledge of Company organizations, processes, program plans, policies and procedures, and products required to effectively perform functional responsibilities of the occupation.

Engineering Drawings & Specs
Ability to read, understand, and interpret engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design).

Facilities Mfg Processes
Knowledge of manufacturing processes (e.g., machining, fabricating, chemical processing, composites, electrical/electronic) and materials.

General Shop Processes
Complete knowledge of shop processes to include Foreign Object Damage/Debris (FOD) prevention, material handling, safety, calibration requirements and Electrostatic Discharge (ESD).

General/Precision Test & Meas
Knowledge of electrical/electronic, general purpose and precision measuring test equipment (e.g., Optical Time Domain Reflectometers (OTDR), multimeters, oscilloscopes, noise/bus/logic/spectrum analyzers, calipers, micrometers, etc.) and associated calibration requirements.

Manufacturing Methods
Knowledge of manufacturing, methods, fabrication processes (e.g., forming, stamping, machining, heat treatment, machines/machine tools, cutting tools and fluids, N/C programming, instrumentation, data acquisition and control systems). Ability to select the best method of producing parts, tools or assemblies.

Materials & Processing
Knowledge of material processing for metals (e.g., welding forging, heat treat, machining, forming), polymers and composites (e.g., autoclave curing, lay-up, co-curing, repair), sealants and finishes processing (e.g., plating, painting, surface preparation, fay surface sealing, fillet sealing), and ceramic (e.g., high temperature processing, machining) and electronic materials (e.g., soldering, printed circuit board cleaning, conformal coating).

Numerical Control Programming
Knowledge of material removal (e.g. metal machining, composite trimming) and material build up (e.g. composites lay-up) to the Numerical Control (NC) programming lifecycle for complex aerospace hardware. Ability to plan, create, validate, and document machine control data (MCD).

Polymers & Composite Materials
Knowledge of polymers and composite materials (such as carbon, fiberglass, aramid, adhesives, thermoset/thermoplastic resins).

Systems Thinking
Ability to understand the big picture and the inter-relationships of all positions and activities in the system, including the impact of changes in one area on another area. This includes the ability to see and understand the inter-relationships between components of systems and plans, anticipate future events, and apply the principles of systems thinking to accelerate performance.

This is a very exciting opportunity to work with one of the world's largest aerospace companies!

The contracts are regularly extended and direct opportunities are often available.

Description:

No degree Required
3+ Years of Experience Required
US Citizen or Permanent Resident
In-Person

Starts Immediately

Lead avionics UI/UX developer for experimental aviation platforms. Must be equipped to work with a team designing on-board networks, integrating comm systems, and deploying unconventional user interfaces leveraging game design.

1% equitty stake being offered.

Building humanitarian aircraft. We're a group of unconventional engineers solving aviation's hardest problems. It's a place un-encumbered by bureaucracy, where your responsibility is simply your work product, and your work product has a positive impact on the world.

Must be proficient in or equipped in similar:

Unity/Blender Do178/FAR 23 Python/C+/C++ Photoshop Illustrator Microsoft Office Automotive Operating Systems

Ideal Attributes:

Humble Communicator Do178/FAR 23 Familiar with aviation electronics regulatory and operational requirements Self-Directed Relevant experience in power generation/distribution Passionate About Orb's Vision Organized

Very exciting opportunity to work with one of the world's largest aerospace companies!

The contracts are regularly extended and direct opportunities are often available.

Description:

Education and Experience Requirements:

High School Diploma or GED required. General knowledge of applicable regulatory requirements and customer specifications. Must know how to use a multimeter. Entry level position. Six (6) months accredited schooling in aviation electronics or general electrical experience preferred.

Principle Duties and Responsibilities:

Essential Functions:

Additional Functions:

Perform other duties as assigned.

Other Requirements:

Education and Experience Requirements: 

• High School diploma/GED.
• General knowledge of applicable regulatory requirements and customer specifications.
• Must know how to use a multimeter.
• Entry level position.
• Six (6) months accredited schooling in aviation electronics or general electrical experience preferred.

Unique Skills:

• Must be able to use Avionics/Electrical hand tools.

Other Requirements:
1. Technical Certificate in aircraft electrical assembly preferred and/or successful completion in current year youth apprenticeship program, in area of expertise.
2. Ability to read and interpret basic blueprints and schematic diagrams.
3. Strong written and verbal skills required.
4. Computer skills and general software knowledge necessary.

Unique Skills:

• Prior Avionics and or plumbing experience

PDS is seeking an Avionics/Electrical Tech Sr. for an open position in Savannah, GA

Position Purpose:
Provides leadership, technical expertise and guidance while performing various operational, functional tests and repairs of avionics/electronic, aircraft equipment and systems to ensure a defect free aircraft. Provides superior technical expertise in testing, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise and leadership by defining and implementing process changes to reduce cost and meet schedule without compromising Safety or Quality. Demonstrates the knowledge and leadership skills required to fill in for the team leader thus ensuring that the company goals of Safety and Quality are enforced all times while adhering to daily work plans to maintain schedule requirements. 

Principal Duties and Responsibilities:

•  Demonstrates superior technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting. Provides direct training to personnel to support company cross-training goals while ensuring a safety conscience, quality oriented, skilled workforce.
• Teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
• Ensures quality and efficiency of all installations: troubleshoots and teaches troubleshooting processes/concepts to provide timely, quality repairs of malfunctioning systems.
• Demonstrates the skills and knowledge required to effective and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring.
• Oversees the performance and compliance with engineering changes and modifications as required.
• Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability.
• Demonstrates through diligent compliance the importance of daily logs and other paperwork. Ensures that all work performed on the aircraft is properly and completely documented
• As required, pre-inspects work of others prior to submitting to inspection for approval to reduce rework and inspection time.
• Provides the knowledge and technical expertise in testing and maintaining test equipment and electronic systems and components as required.
• Enforces the company FOD program, tool control program, 5-S program and all safety regulations.
• Maintains required logs and records.
• Adapts to sudden schedule changes.
• Coordinates with other disciplines concerning projects. 

Additional Functions:

• Where required, teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
• Self inspection capability for all avionics testing functions in applicable areas.
• In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.

• Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs.
• APU run qualification and engine run qualification preferred.
• Ability to read and interpret basic blueprints and schematic diagrams.

Unique Skills:

Avionics and/or Electrical system development and integration experience is required. Experience with the FAA (14 CFR Part 25) and/or EASA (CS-25) certification is required. Experience with Data Concentration Networking and/or Integrated Modular Avionics is preferred. Understanding of DO-160, DO-178 and DO-254 processes is preferred. System integration lab and/or aircraft functional testing and troubleshooting experience is preferred. ARP-4754A experience including requirements development, validation and verification is preferred. Experience with IBM DOORS or other requirements management database is preferred. Bachelor's Degree required equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job. Other Requirements Advanced degree in engineering related field preferred The level of technical skill and abilities appropriate for this grade will be established by each discipline

Unique Skills:

Aircraft furniture avionics installs and plumbing installs. Basic computer and office suite experience.

Very exciting opportunity to work with one of the world's largest aerospace companies!

The contracts are regularly extended and direct opportunities are often available.

Description:

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a robust 401K offering. In some cases there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

Designing and simulating High voltage power systems with an emphasis on building and demonstrating prototypes. You'll design and test generator and power distribution prototype systems using primarily off the shelf components. Preferably lots of hands-on integration experience paired with the latest in design and simulation.

Technical Knowledge of High Torque and Speed Electric Motor & Actuation Systems Produce Quality Documentation to Communicate across the Engineering Team Effectively Architect Power Distribution and Balancing Across Systems.

Preferred Skills:

Dassault Systems 3DS Microsoft Office MATLAB Electric Motor Design Electronic Speed Controller Design Python/C+

Ideal Attributes:

Humble Communicator Self-Directed Passionate About Orb's Vision Organized (Practice 5S) Wide Knowledge Base Across Disciplines

Must-haves:

• 
  

  Bachelor's of Science degree in Electrical Engineering or other related discipline and typically 6 or more years of relevant experience

  
  
• 
  

  Demonstrated knowledge of engineering principles and practices

  
  
• 
  

  Understanding of Computer Aided Engineering tools

  
  
• 
  

  Experience working in multi-disciplinary design & development teams

  
  

Preferred:

• 
  

  Exposure to simulations through functional and logical models and system analysis

  
  
• 
  

  Background in the Aerospace and Defense Industry

  
  
• 
  

  Experience composing and analyzing Electrical Load Analysis (ELA),  circuit modeling, simulation, and analysis

  
  
• 
  

  Familiarity with design requirements related to High Intensity Radiated Field (HIRF) and Indirect Effects of Lightning (IEL)

  
  
• 
  

  Knowledge of industry-standard electrical design principles, to include, but not limited to model-based definition, electrical component selection, manufacturing, and production processes

  
  
• 
  

  Familiar with Electro Magnetic Effects (EME) to include, Electro Magnetic Compatibility (EMC) and Electro Magnetic Interference (EMI)

  
  
• 
  

  Experience in digital or analog circuit design and schematic capture

  
  
• 
  

  Understanding of the printed circuit board layout process and tools

  
  

Electrical engineers research, design, develop, test, certify, deploy and improve cutting edge products and services. These cover a very wide range from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. You'll conceptualize and design new products and processes throughout the product lifecycle from analog and digital electronic circuit card assemblies to fully integrated systems.

Must-haves:

Electrical engineers research, design, develop, test, certify, deploy and improve cutting edge products and services. These cover a very wide range from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. You'll conceptualize and design new products and processes throughout the product lifecycle from analog and digital electronic circuit card assemblies to fully integrated systems.

Electrical engineers research, design, develop, test, certify, deploy and improve cutting edge products and services. These cover a very wide range from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. You'll conceptualize and design new products and processes throughout the product lifecycle from analog and digital electronic circuit card assemblies to fully integrated systems.

Must-haves: