Job Search Results

462 listings were found that matched your search words: Keywords: Electronic ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2024/03/28 Thursday 07:37AM Pacific Time by ContractJobHunter. )

Listings 1 - 462

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
6 Non-Destructive Test (NDT/NDI) Level II Needed

Description:
Seeking aviation/aircraft non-destructive test (NDT/NDI) Level 2
MUST BE US PERSONS
MUST have successfully completed minimum training requirements defined in NAS 410, ATA 105, or ASNT-SNT-TC-1A for a Level 2 inspector in UT and PT.

• Responsible for accomplishing assigned inspection work on space flight system hardware, assemblies and vehicles.
• Conducts inspections utilizing a variety of NDT methods which may include but are not limited to ultrasonic, penetrant, x-ray, eddy-current, and thermal/infrared and laser shearography.
• Properly utilize NDT test equipment and associated tools to successfully interrogate hardware and structures, make decisions as to their acceptability for continued use and keep abreast of new and advanced test equipment.
• Operate manual and automated NDT equipment.
• Shall be required to document inspection results in both paper and electronic forms as well as complete and sign work records in connection with work performed.
• Inspects parts, sub-assemblies and completed assemblies to the extent necessary to determine, accomplish and approve acceptability in accordance with written procedures.
• Will be required to, but not limited to be working on check aircraft.
• Assist with development of procedures and techniques for non-destructive testing of metallic and composite structures.
• Support training of other NDT personnel using hands-on knowledge from the vehicles via different mediums as appropriate.
• Excellent attendance, ability to work overtime, and other shifts as required.

REQUIREMENTS
• Must have successfully completed minimum training requirements defined in NAS 410, ATA 105, or ASNT-SNT-TC-1A for a Level 2 inspector in UT and PT. Training in other NDT methods is desirable.
• Must have recent, documented hours, working as a NDT inspector and have obtained sufficient experience to be certified in accordance with NAS 410, ATA 105, or ASNT-SNT-TC-1A.
• Must have strong working knowledge of composite aircraft and/or aerospace non-destructive testing processes in composite material.
• Ability to conduct inspections with limited supervision.
• Minimum 5 years aviation/aerospace industry experience desired.
• Excellent computer skills. Skilled in working in Microsoft Office applications.
• Experience on narrow body and/or business jet aircraft preferred.
• Experience with composite aircraft is preferred although not required (commercial or military aerospace application).
• Must display maturity of action and judgment.
• Must be able to work under pressure and thrive in a fast-paced environment.
• Good communication skills.
• Ability to read, interpret, and communicate blueprints, specs, and other technical documents.

Physical and/or Additional Requirements
• Perform physical requirements of the position, including use of inspection hand tools, NDT equipment, lift up to 50 lbs., pass eye examination.
• Willing to work overtime, all shifts, travel and be on-call as necessary.

The Structures Company LLC is an AA/EOE.
 
Job Number: 504
Job Location: Mojave, CA
Rate: **DOE**
Per Diem: Yes
Overtime: Possible
Duration: 8+ Months
Start Date: ASAP
Input Date: 09/29/2021
Last Updated: 02/24/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
AOG Assembly Mechanic

Description:
    Description :Assemble, install, seal, rig, inspect, and complete precision and other structural and system components, working from drawings, documents, process specifications, quality control requirements, and established processes and procedures. Functional test and correct, fit form and function of assemblies and components.1. Obtain required information from prints, charts, sketches, work instructions, documents, verbal and electronic information.2. Use shop mathematics and precision measuring and or test instruments to complete work assignments and functional test assemblies andcomponents.3. Utilize tooling in the assembly of components into sub-assemblies or end items.4. Verify work performed is per work instructions and meets process and/or engineering specification. Identify discrepancies found per applicable procedure.5. Ensure equipment and tool certification occurs per procedure.6. Perform routine minor machine maintenance as part of their daily work duties (e.g., where applicable, replacing machine filters, changing standard light bulbs on machines and equipment, maintaining lubrication/coolant levels, etc. as related to basic Total Preventative Maintenance duties).7. Routinely move product within the immediate manufacturing work area, including across isle, using shop assigned equipment as required, and complete transactions necessary to move product to the next operation. On an exception basis, move product to the next operation within abuilding.8. Perform work within allotted schedules.9. Support the continuous flow of product within the manufacturing process by training and assisting employees at all classificationlevels.10. Assist in the training of other assembly personnel in assembly, installation and inspections techniques.11. Cross trains in inspection and becomes SIA qualified. Level C Employee must have the skill and knowledge to perform in all of the general functions of the Assembly Mechanic listed below: Assembly/Installation Structures Sub Assembly Sealer Requirements:
      787 rework - composite mechanics (preferably), if they have a structures background it would be helpful as well. MUST be willing to have the flexibility to be in either South Carolina or Washington (and likely switch between both locations). Spirit will schedule/pay for flights Pay rate, per diem, reimbursement of hotel/rental vehicle. Training will take place in Wichita, KS or in Renton, WA (TBD)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2561-2545-11534
Job Location: Renton WA
Per Diem: --
Overtime: --
Start Date: 2022-02-07
Input Date: 12/14/2021
Last Updated: 11/16/2023
Firm Name: STRUCTURES COMPANY LLC
Attention: JR Gonsalves
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
AOG Mechanic

Description:
    Description :Assemble, install, seal, rig, inspect, and complete precision and other structural and system components, working from drawings, documents, process specifications, quality control requirements, and established processes and procedures. Functional test and correct, fit form and function of assemblies and components.
    Duties
    The Company will provide appropriate assistance in job training to enable employees to perform all necessary job functions including the following:
    1. Work with blueprints, changes, specifications, work orders, etc. to assemble and install to quality requirements parts and assemblies.
    2. Complete required data gathering transactions to facilitate assembly progression.
    3. Setup and perform all manual and automated assembly operations, and portable machine functions required to accomplish assignments.
    4. Perform any and all required pickup, rework, fabrication, change incorporation, functional testing or check during or after final assembly and/or assembly progression.
    5. Move and/or obtain correct parts, materials, tools, assemblies, etc.
    6. Use precision measuring instruments required to accomplish work assignments.
    7. Report and/or investigate job handicaps such as: errors in parts, assembly procedures, tools, sequences, etc.
    8. Perform routine minor machine maintenance as part of their daily work duties (e.g., where applicable, replacing machine filters, changing standard light bulbs on machines and equipment, maintaining lubrication/coolant levels, etc. as related to basic Total Preventative Maintenance duties).
    9. Routinely move product within the immediate manufacturing work area, including across isle, using shop assigned equipment as required and complete transactions necessary to move product to the next operation. On an exception basis, move product to the next operation within a building.
    10. Support the continuous flow of product within the manufacturing process by training, coaching and assisting employees of all classification levels.
    11. Document any discrepancies according to specification, process, and procedure.
    12. Cross trains in inspection and becomes SIA qualified.

    Sealer - Seal parts, assemblies and sub-assemblies fillet and fay, apply leveling compound or scotch cast etc.
    Pressure / Vacuum Test - Perform visual and auditory leak checks in aircraft sections
    Precision Bench Assembly - Assemble precision aircraft parts and assemblies such as landing gear, control linkage etc.
    Sub-Assembly - Assemble parts to make sub assemblies using templates, jigs, and fixtures
    Assembly / Installation Structures - Assemble structural parts, assemblies, and skins to make larger assemblies
    Assembly / Installation Doors - Pre- assemble, trim, fit , rig , seal, align, and adjust aircraft door systems
    Integral Fuel Cell - Apply sealing compounds to seal fuel cell and wing section components
    Inspection - Inspect and document non conformances on final assemblies, subassemblies, systems, and installations
    Verifies dimensions of parts using both mechanical and electronic measurement tools and, relative to these inspection duties, initiate and document corrective action for programming issues and other problems.
    Setup and operate conventional and Computerized Numerical Controlled (CNC) fastening equipment, similar to Multi-Task Gantry Riveter's (MTGR's), Brotje's , C-Frames, IPAC's etc., to assemble components in accordance with engineering specifications, Requirements:

    These resources need to be proficient at skin disassembly and reassembly on finished airplanes

    Per current policy, resource will have to be fully compliant with COVID vaccine requirement by 01/04/2022

    LOCAL to the Area, Strongly Preferred.
    MUST BE able to work any shift.

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2563-2547-11534
Job Location: San Antonio TX
Per Diem: --
Overtime: --
Start Date: 2022-02-07
Input Date: 12/14/2021
Last Updated: 11/16/2023
Firm Name: STRUCTURES COMPANY LLC
Attention: JR Gonsalves
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
AOG Mechanic

Description:
    Description :Assemble, install, seal, rig, inspect, and complete precision and other structural and system components, working from drawings, documents, process specifications, quality control requirements, and established processes and procedures. Functional test and correct, fit form and function of assemblies and components.
    Duties
    The Company will provide appropriate assistance in job training to enable employees to perform all necessary job functions including the following:
    1. Work with blueprints, changes, specifications, work orders, etc. to assemble and install to quality requirements parts and assemblies.
    2. Complete required data gathering transactions to facilitate assembly progression.
    3. Setup and perform all manual and automated assembly operations, and portable machine functions required to accomplish assignments.
    4. Perform any and all required pickup, rework, fabrication, change incorporation, functional testing or check during or after final assembly and/or assembly progression.
    5. Move and/or obtain correct parts, materials, tools, assemblies, etc.
    6. Use precision measuring instruments required to accomplish work assignments.
    7. Report and/or investigate job handicaps such as: errors in parts, assembly procedures, tools, sequences, etc.
    8. Perform routine minor machine maintenance as part of their daily work duties (e.g., where applicable, replacing machine filters, changing standard light bulbs on machines and equipment, maintaining lubrication/coolant levels, etc. as related to basic Total Preventative Maintenance duties).
    9. Routinely move product within the immediate manufacturing work area, including across isle, using shop assigned equipment as required and complete transactions necessary to move product to the next operation. On an exception basis, move product to the next operation within a building.
    10. Support the continuous flow of product within the manufacturing process by training, coaching and assisting employees of all classification levels.
    11. Document any discrepancies according to specification, process, and procedure.
    12. Cross trains in inspection and becomes SIA qualified.

    Sealer - Seal parts, assemblies and sub-assemblies fillet and fay, apply leveling compound or scotch cast etc.
    Pressure / Vacuum Test - Perform visual and auditory leak checks in aircraft sections
    Precision Bench Assembly - Assemble precision aircraft parts and assemblies such as landing gear, control linkage etc.
    Sub-Assembly - Assemble parts to make sub assemblies using templates, jigs, and fixtures
    Assembly / Installation Structures - Assemble structural parts, assemblies, and skins to make larger assemblies
    Assembly / Installation Doors - Pre- assemble, trim, fit , rig , seal, align, and adjust aircraft door systems
    Integral Fuel Cell - Apply sealing compounds to seal fuel cell and wing section components
    Inspection - Inspect and document non conformances on final assemblies, subassemblies, systems, and installations
    Verifies dimensions of parts using both mechanical and electronic measurement tools and, relative to these inspection duties, initiate and document corrective action for programming issues and other problems.
    Setup and operate conventional and Computerized Numerical Controlled (CNC) fastening equipment, similar to Multi-Task Gantry Riveter's (MTGR's), Brotje's , C-Frames, IPAC's etc., to assemble components in accordance with engineering specifications, Requirements:

    MRO Experience is a MUST. These resources need to be proficient at skin disassembly and reassembly on finished airplanes.

    (Hotel & Car Rental will be reimbursed, while training in Renton, for those who qualify)

    MUST be LOCAL to the Area

    MUST BE able to work any shift.

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2562-2546-11534
Job Location: Moses Lake WA
Per Diem: --
Overtime: --
Start Date: 2022-02-07
Input Date: 12/14/2021
Last Updated: 11/16/2023
Firm Name: STRUCTURES COMPANY LLC
Attention: JR Gonsalves
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
AOG Mechanic

Description:
    Description :Assemble, install, seal, rig, inspect, and complete precision and other structural and system components, working from drawings, documents, process specifications, quality control requirements, and established processes and procedures. Functional test and correct, fit form and function of assemblies and components.
    Duties
    The Company will provide appropriate assistance in job training to enable employees to perform all necessary job functions including the following:
    1. Work with blueprints, changes, specifications, work orders, etc. to assemble and install to quality requirements parts and assemblies.
    2. Complete required data gathering transactions to facilitate assembly progression.
    3. Setup and perform all manual and automated assembly operations, and portable machine functions required to accomplish assignments.
    4. Perform any and all required pickup, rework, fabrication, change incorporation, functional testing or check during or after final assembly and/or assembly progression.
    5. Move and/or obtain correct parts, materials, tools, assemblies, etc.
    6. Use precision measuring instruments required to accomplish work assignments.
    7. Report and/or investigate job handicaps such as: errors in parts, assembly procedures, tools, sequences, etc.
    8. Perform routine minor machine maintenance as part of their daily work duties (e.g., where applicable, replacing machine filters, changing standard light bulbs on machines and equipment, maintaining lubrication/coolant levels, etc. as related to basic Total Preventative Maintenance duties).
    9. Routinely move product within the immediate manufacturing work area, including across isle, using shop assigned equipment as required and complete transactions necessary to move product to the next operation. On an exception basis, move product to the next operation within a building.
    10. Support the continuous flow of product within the manufacturing process by training, coaching and assisting employees of all classification levels.
    11. Document any discrepancies according to specification, process, and procedure.
    12. Cross trains in inspection and becomes SIA qualified.

    Sealer - Seal parts, assemblies and sub-assemblies fillet and fay, apply leveling compound or scotch cast etc.
    Pressure / Vacuum Test - Perform visual and auditory leak checks in aircraft sections
    Precision Bench Assembly - Assemble precision aircraft parts and assemblies such as landing gear, control linkage etc.
    Sub-Assembly - Assemble parts to make sub assemblies using templates, jigs, and fixtures
    Assembly / Installation Structures - Assemble structural parts, assemblies, and skins to make larger assemblies
    Assembly / Installation Doors - Pre- assemble, trim, fit , rig , seal, align, and adjust aircraft door systems
    Integral Fuel Cell - Apply sealing compounds to seal fuel cell and wing section components
    Inspection - Inspect and document non conformances on final assemblies, subassemblies, systems, and installations
    Verifies dimensions of parts using both mechanical and electronic measurement tools and, relative to these inspection duties, initiate and document corrective action for programming issues and other problems.
    Setup and operate conventional and Computerized Numerical Controlled (CNC) fastening equipment, similar to Multi-Task Gantry Riveter's (MTGR's), Brotje's , C-Frames, IPAC's etc., to assemble components in accordance with engineering specifications, Requirements:

    These resources need to be proficient at skin disassembly and reassembly on finished airplanes

      Aiming for training to take place in Renton on 11/8/21
      LOCAL to the Area, Strongly Preferred.
      MUST BE able to work any shift

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2564-2548-11534
Job Location: Renton WA
Per Diem: --
Overtime: --
Start Date: 2022-02-07
Input Date: 12/14/2021
Last Updated: 11/16/2023
Firm Name: STRUCTURES COMPANY LLC
Attention: JR Gonsalves
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
AOG Mechanic - Fuselage

Description:
    Description Assemble, install, seal, rig, inspect, and complete precision and other structural and system components, working from drawings, documents, process specifications, quality control requirements, and established processes and procedures. Functional test and correct, fit form and function of assemblies and components. Duties
    The Company will provide appropriate assistance in job training to enable employees to perform all necessary job functions including the following:
    1. Work with blueprints, changes, specifications, work orders, etc. to assemble and install to quality requirements parts and assemblies.
    2. Complete required data gathering transactions to facilitate assembly progression.
    3. Setup and perform all manual and automated assembly operations, and portable machine functions required to accomplish assignments.
    4. Perform any and all required pickup, rework, fabrication, change incorporation, functional testing or check during or after final assembly and/or assembly progression.
    5. Move and/or obtain correct parts, materials, tools, assemblies, etc.
    6. Use precision measuring instruments required to accomplish work assignments.
    7. Report and/or investigate job handicaps such as: errors in parts, assembly procedures, tools, sequences, etc.
    8. Perform routine minor machine maintenance as part of their daily work duties (e.g., where applicable, replacing machine filters, changing standard light bulbs on machines and equipment, maintaining lubrication/coolant levels, etc. as related to basic Total Preventative Maintenance duties).
    9. Routinely move product within the immediate manufacturing work area, including across isle, using shop assigned equipment as required and complete transactions necessary to move product to the next operation. On an exception basis, move product to the next operation within a building.
    10. Support the continuous flow of product within the manufacturing process by training, coaching and assisting employees of all classification levels.
    11. Document any discrepancies according to specification, process, and procedure.
    12. Cross trains in inspection and becomes SIA qualified.

    Sealer - Seal parts, assemblies and sub-assemblies fillet and fay, apply leveling compound or scotch cast etc.
    Pressure / Vacuum Test - Perform visual and auditory leak checks in aircraft sections
    Precision Bench Assembly - Assemble precision aircraft parts and assemblies such as landing gear, control linkage etc.
    Sub-Assembly - Assemble parts to make sub assemblies using templates, jigs, and fixtures
    Assembly / Installation Structures - Assemble structural parts, assemblies, and skins to make larger assemblies
    Assembly / Installation Doors - Pre- assemble, trim, fit , rig , seal, align, and adjust aircraft door systems
    Integral Fuel Cell - Apply sealing compounds to seal fuel cell and wing section components
    Inspection - Inspect and document non conformances on final assemblies, subassemblies, systems, and installations
    Verifies dimensions of parts using both mechanical and electronic measurement tools and, relative to these inspection duties, initiate and document corrective action for programming issues and other problems.
    Setup and operate conventional and Computerized Numerical Controlled (CNC) fastening equipment, similar to Multi-Task Gantry Riveter's (MTGR's), Brotje's , C-Frames, IPAC's etc., to assemble components in accordance with engineering specifications, Requirements:These resources need to be proficient at skin disassembly and reassembly on finished airplanes
    Aiming for a training start date in Wichita on 01/10/2022
    Candidates must be fully Vaccinated by 01/04/2022
    Candidate has to undergo 10 years of background check, which supplier will have to conduct once offered/accepted.

    LOCAL to the Area, Strongly Preferred.

    MUST BE able to work any shift.

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2560-2544-11534
Job Location: Victorville CA
Per Diem: --
Overtime: --
Start Date: 2022-02-07
Input Date: 12/14/2021
Last Updated: 11/16/2023
Firm Name: STRUCTURES COMPANY LLC
Attention: JR Gonsalves
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Designer

Description:
Do you want to work for an Aerospace company on the forefront of technology? Are you a self-starter known for your partnership and communication skills, come join us as a Designer!
In this role, you will be using your skills and expertise to develop highly complex designs.
These cover a very wide range, from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems.
You'll create and review layouts, drawings, and models for clarity, completeness, and accuracy.
You'll identify design errors, omissions, and other deficiencies, and recommend revisions and/or improvements in designs

Must-haves:

Bachelor's Degree in a related field of study and typically 3 or more years of relevant experience

A higher level degree may substitute for experience

Related experience may be considered in lieu of required education

Understanding of engineering principles and practices

Experience with Computer Aided Engineering tools

Ability to work in multi-disciplinary design and development teams

Preferred:

Experience using SOLIDWORKS, Creo, NX, ProEngineer, AutoCAD, CATIA or Enovia 3Dxperience software.

Working knowledge of ASME and Government standards.

Background in the Aerospace & Defense Industry.

Prior experience applying and interpreting Geometric Dimensioning and Tolerancing (GD&T) per ASME Y14.5

Knowledge of industry-standard design principles, to include, but not limited to parametric design, model-based definition, material hardware and or electrical component selection, fabrication, manufacturing, and production processes

Familiarity with Electro-Magnetic Effects (EME) to include, Electro Magnetic Compatibility (EMC) and Electro-Magnetic Interference (EMI)

Experience in digital and analog circuit layout and schematic capture

Understanding of the printed circuit board layout process and tools

IMPORTANT NOTICE:

To conform to U.S. Government international trade regulations, applicant must be a U.S. Citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State or U.S. Department of Commerce.
 
Job Number: R0015306
Job Location: Denver, CO
Rate: $34/HR
Per Diem: Possible
Overtime: Possible
Duration: Long Term Contract
Start Date: ASAP
Input Date: 11/13/2021
Last Updated: 01/28/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Corey Halliday
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Designer II

Description:
Do you want to work for an Aerospace company on the forefront of technology? Are you a self-starter known for your partnership and communication skills, come join us as a Designer!
    In this role, you will be using your skills and expertise to develop highly complex designs. These cover a very wide range, from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. You'll create and review layouts, drawings, and models for clarity, completeness, and accuracy. You'll identify design errors, omissions, and other deficiencies, and recommend revisions and/or improvements in designs

Must-haves:

    Bachelor's Degree in a related field of study and typically 3 or more years of relevant experience

      A higher level degree may substitute for experience

      Related experience may be considered in lieu of required education

    Understanding of engineering principles and practices

    Experience with Computer Aided Engineering tools

    Ability to work in multi-disciplinary design and development teams

Preferred:

    Experience using SOLIDWORKS, Creo, NX, ProEngineer, AutoCAD, CATIA or Enovia 3Dxperience software.

    Working knowledge of ASME and Government standards.

    Background in the Aerospace & Defense Industry.

    Prior experience applying and interpreting Geometric Dimensioning and Tolerancing (GD&T) per ASME Y14.5

    Knowledge of industry-standard design principles, to include, but not limited to parametric design, model-based definition, material hardware and or electrical component selection, fabrication, manufacturing, and production processes

    Familiarity with Electro-Magnetic Effects (EME) to include, Electro Magnetic Compatibility (EMC) and Electro-Magnetic Interference (EMI)

    Experience in digital and analog circuit layout and schematic capture

    Understanding of the printed circuit board layout process and tools

IMPORTANT NOTICE:

To conform to U.S. Government international trade regulations, applicant must be a U.S. Citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State or U.S. Department of Commerce.

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2373-2362-11534
Job Location: Broomfield CO
Per Diem: --
Overtime: --
Start Date: 2022-03-18
Input Date: 12/27/2021
Last Updated: 11/28/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Corey Halliday
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Electrician/Avionics Technician - HOT Job!

Description:
Very exciting opportunity to work with one of the world's largest aerospace companies!

The contracts are regularly extended and direct opportunities are often available.

Details:

Must be able to obtain a security clearance
Rotating shifts
Summary:

Assists in the performance of aircraft bench and/or flight line operational testing, troubleshooting, adjustment, repair and installation of any complex or non-complex aircraft electrical or electronic system in the testing development and modification of aircraft and related systems.
Perform assembly, installation, check-out physical characteristics, operational testing, and modification of wire bundles in the testing, development, and modification of aircraft in accordance with DOD, manufacturer, company supplier, and other directives.
Able to read and interpret schematics, assembly drawings, process specifications, technical manuals, written instructions, test procedures, etc.
Able to use common hand tools.
Able to perform close tolerance assemble operations.
Desired Skills:

Able to effectively communicate orally and written with other employees, members of supervision and others as required in their duties.
Able to clearly document maintenance and repair actions, equipment status tags, logs, parts requests, etc.
Able to perform assigned duties while wearing required safety equipment.
Able to perform assigned duties on all shifts without encumbrances due to weather or physical location and conditions.
Order parts, pan stock, tools, materials, and equipment as required to perform assigned duties.
Required Avionics knowledge for trouble-shooting during induction and delivery of all aircraft.
Responsible for complying with all rules and regulations concerning health and safety, FOD prevention, tool control, contracts, facilities, and other pertinent processes and procedures.
Responsible for the proper performance of assignments and the prudent handling of products, tools, and equipment.
Performs other duties as directed by supervisor and management for the benefit of the company, program, or employees.
About Us:

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service.

We support the majority of aerospace OEM's and tier 1 suppliers across the United States.

We have a national medical, dental, and vision plan with United Healthcare, and we also have a robust 401K offering. In addition, there is potential for bonuses, sick pay, and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)
 
Job Location: Jacksonville, FL
Rate: 38
Per Diem: Possible
Overtime: Possible
Duration: 6-12 mos
Start Date: ASAP
Input Date: 11/08/2021
Last Updated: 08/24/2023
Firm Name: STRUCTURES COMPANY LLC
Attention: Diego Villegas
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Machinist C

Description:

This is a very exciting opportunity to work with one of the world's largest aerospace companies!

The contracts are regularly extended and direct opportunities are often available.

JOB DESCRIPTION SUMMARY
Follows general instructions, reads and interprets complex blueprint drawings and specifications to set-up and machine items to fabricate out of sequence emergent production parts as required using manual and CNC machines. Develops and revises Machine Control Data (MCD) and geometry. Assists the team in resolving issues and completing job responsibilities.

DESIRED COMPETENCIES
Accountability and Responsibility
Demonstrates a willingness to accept responsibility and accountability for one's actions. Exhibits a moral, legal or mental accountability in areas of responsibility.

Adaptability
Maintains effectiveness when experiencing major changes in work tasks or the work environment; adjusts effectively to work within new work structures, processes, requirements, and/or cultures.

Change Management
Encourages others to seek opportunities for different and innovative approaches to addressing problems and opportunities; facilitates the implementation and acceptance of change within the workplace.

Continuous Improvement
Originates action to improve existing conditions and processes; uses appropriate methods to identify opportunities, implements solutions, and measures impact.

Continuous Learning
Demonstrates an interest in personal learning and development. Seeks feedback from multiple sources about how to improve and develop; modifies behavior based on feedback or self-analysis of past mistakes. Takes steps to develop and maintain the knowledge, skill, and ability to perform.

Innovation / Creativity
Discovers new opportunities and solutions for problems by looking beyond current practices and using innovative thinking. Tries different and novel ways to deal with work problems and opportunities.

Planning and organizing
Effectively plan what is to be achieved and involve all relevant stakeholders. Anticipate important or critical events, identifying resource requirements and assigning responsibility for specific work, including deadlines and performance expectations. Demonstrate the use of information -gathering techniques, analyzing situations and identifying implications in order to make correct decisions. Demonstrate ability to monitor progress and to make changes as required.

Strategic Decision Making
Obtains information and identifies key issues and relationships relevant to achieving a long-range goal or vision; commits to a course of action to accomplish a long-range goal or vision after developing alternatives based on logical assumptions, facts, available resources, constraints, and organizational values.

Teamwork
Demonstrates a commitment to the mission and motivation to combine the team's energy and expertise to achieve a common objective. Understands the dynamics of effective teamwork in order to attain higher levels of performance. Demonstrates ability to work as a member of a team.

DESIRED TECHNICAL COMPETENCIES
Adhesive Materials/Processes
Knowledge of adhesive materials (such as epoxy, urethane, polyimide, reinforcements, etc) and processes.

Knowledge
Knowledge of Company organizations, processes, program plans, policies and procedures, and products required to effectively perform functional responsibilities of the occupation.

Engineering Drawings & Specs
Ability to read, understand, and interpret engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design).

Facilities Mfg Processes
Knowledge of manufacturing processes (e.g., machining, fabricating, chemical processing, composites, electrical/electronic) and materials.

General Shop Processes
Complete knowledge of shop processes to include Foreign Object Damage/Debris (FOD) prevention, material handling, safety, calibration requirements and Electrostatic Discharge (ESD).

General/Precision Test & Meas
Knowledge of electrical/electronic, general purpose and precision measuring test equipment (e.g., Optical Time Domain Reflectometers (OTDR), multimeters, oscilloscopes, noise/bus/logic/spectrum analyzers, calipers, micrometers, etc.) and associated calibration requirements.

Manufacturing Methods
Knowledge of manufacturing, methods, fabrication processes (e.g., forming, stamping, machining, heat treatment, machines/machine tools, cutting tools and fluids, N/C programming, instrumentation, data acquisition and control systems). Ability to select the best method of producing parts, tools or assemblies.

Materials & Processing
Knowledge of material processing for metals (e.g., welding forging, heat treat, machining, forming), polymers and composites (e.g., autoclave curing, lay-up, co-curing, repair), sealants and finishes processing (e.g., plating, painting, surface preparation, fay surface sealing, fillet sealing), and ceramic (e.g., high temperature processing, machining) and electronic materials (e.g., soldering, printed circuit board cleaning, conformal coating).

Numerical Control Programming
Knowledge of material removal (e.g. metal machining, composite trimming) and material build up (e.g. composites lay-up) to the Numerical Control (NC) programming lifecycle for complex aerospace hardware. Ability to plan, create, validate, and document machine control data (MCD).

Polymers & Composite Materials
Knowledge of polymers and composite materials (such as carbon, fiberglass, aramid, adhesives, thermoset/thermoplastic resins).

Systems Thinking
Ability to understand the big picture and the inter-relationships of all positions and activities in the system, including the impact of changes in one area on another area. This includes the ability to see and understand the inter-relationships between components of systems and plans, anticipate future events, and apply the principles of systems thinking to accelerate performance.

Additional Skills:
Education/experience typically acquired through basic education (e.g. High School diploma/GED) and typically 4 or more years' related work experience or an equivalent combination of education and experience (e.g. vocational school/Associate+2 years' related work, Bachelor, etc.).

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a 401K offering. In some states and on some openings there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 1796-1799-11534
Job Location: New Orleans LA
Per Diem: --
Overtime: --
Start Date: 2022-01-10
Input Date: 01/04/2022
Last Updated: 09/19/2023
Firm Name: STRUCTURES COMPANY LLC
Attention: Tania Martinez
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Mechanic II - Electrical

Description:
This mechanic maintains repairs and modifies aircraft electrical systems and electrical components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight control systems, engines, flight deck, routing, terminations, connector building and troubleshooting, applies technical knowledge of aircraft electrical systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as schematics or manufactures' manuals. Job requirements: must have a thorough knowledge of aircraft electrical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft repair, must have thorough knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, and bond meters. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects.

Job Description

Position Requirements:

• Perform connector terminations including shielded wires, coaxial cables, and fiber optic wiring.

• Ability and understanding of routing instructions and handling of harnesses.

• Perform efforts associated with sealing, wrapping, bonding, tying, and closure of wire harnesses and cables in accordance with standard processes.

• Demonstrates the capability to read and interpret engineering drawings, technical orders, process specification, and retrofit requirements to perform electrical modification/repair.

• Experienced in the use of tooling assemblies and fixtures for depot level modification and repair of electrical wiring.

• Adhering to government and company procedural guidance, performs assembly, installation, visual inspection of physical characteristics, modification of wire bundles & electrical assemblies, operational and quality checks of aircraft work.

• Troubleshoots malfunctions in aircraft electrical and comm/nav-systems of moderate difficulty at the organizational or depot maintenance level.

• Interpret standard work instructions, charts, tables, blueprints, wire diagrams, formulas, sketches, verbal and electronic orders, job layouts, etc. to accomplish assigned work.

• Ensure that all equipment is used in accordance with established safety and operating procedures.

• Perform all tasks involved in the coordination, preparation, and movement of material and tools.

• Operate riding type electric powered elevating equipment to accomplish work assignment.

• Maintain necessary certifications, licenses and permits as required for assigned work.

• Will be required to work with the guidance of more senior skilled employees and assist less senior employees.

• Perform all duties of lower Electrical classifications as required to successfully accomplish assignments.

• The candidate must be able to ascend and descend vertical work ladders, work in confined spaces, and lift loads of approximately 35 pounds.

• Must be able to work various shifts and/or an alternate baseline schedule that may frequently change to support mission requirements and may include weekends and holidays. Mission requirements and/or workload may require both scheduled and unscheduled overtime.
 
Job Number: JPC-1603
Job Location: SAN ANTONIO, TX
Rate: 35-40 HR
Input Date: 01/28/2022
Last Updated: 10/07/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Diego villegas
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Mechanic II - Electrical - Avionics x 100 openings -(VC)

Description:

This is a very exciting opportunity to work with one of the world's largest aerospace companies!

The contracts are regularly extended and direct opportunities are often available.

Description:

NOTE: This position will require the ability to obtain customer approval for access. Dual citizenship or prior citizenship of any other country may preclude ability to obtain access. A 3rd party background check relating to personal and business finances, residences, employment history, past drug use, prior military service, and criminal behavior will be conducted prior to a start date.

This mechanic maintains repairs and modifies aircraft electrical systems and electrical components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight control systems, engines, flight deck, routing, terminations, connector building and troubleshooting, applies technical knowledge of aircraft electrical systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as schematics or manufactures' manuals. Job requirements: must have a thorough knowledge of aircraft electrical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft repair, must have thorough knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, and bond meters. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects.

Job Description

Position Requirements:

Perform connector terminations including shielded wires, coaxial cables, and fiber optic wiring.

Ability and understanding of routing instructions and handling of harnesses.

Perform efforts associated with sealing, wrapping, bonding, tying, and closure of wire harnesses and cables in accordance with standard processes.

Demonstrates the capability to read and interpret engineering drawings, technical orders, process specification, and retrofit requirements to perform electrical modification/repair.

Experienced in the use of tooling assemblies and fixtures for depot level modification and repair of electrical wiring.

Adhering to government and company procedural guidance, performs assembly, installation, visual inspection of physical characteristics, modification of wire bundles & electrical assemblies, operational and quality checks of aircraft work.

Troubleshoots malfunctions in aircraft electrical and comm/nav-systems of moderate difficulty at the organizational or depot maintenance level.

Interpret standard work instructions, charts, tables, blueprints, wire diagrams, formulas, sketches, verbal and electronic orders, job layouts, etc. to accomplish assigned work.

Ensure that all equipment is used in accordance with established safety and operating procedures.

Perform all tasks involved in the coordination, preparation, and movement of material and tools.

Operate riding type electric powered elevating equipment to accomplish work assignment.

Maintain necessary certifications, licenses and permits as required for assigned work.

Will be required to work with the guidance of more senior skilled employees and assist less senior employees.

Perform all duties of lower Electrical classifications as required to successfully accomplish assignments.

The candidate must be able to ascend and descend vertical work ladders, work in confined spaces, and lift loads of approximately 35 pounds.

Must be able to work various shifts and/or an alternate baseline schedule that may frequently change to support mission requirements and may include weekends and holidays. Mission requirements and/or workload may require both scheduled and unscheduled overtime.
Skills:
Category
Name
Required
Level
No items to display.
High School Diploma or Equivalent

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a 401K offering. In some states and on some openings there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2609-2593-11534
Job Location: San Antonio TX
Per Diem: --
Overtime: --
Start Date: 2022-03-23
Input Date: 12/24/2021
Last Updated: 09/27/2023
Firm Name: STRUCTURES COMPANY LLC
Attention: Kimra Stone
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Automotive UI/UX Game Designer

Description:

No degree Required
3+ Years of Experience Required
US Citizen or Permanent Resident
In-Person

Starts Immediately

Lead avionics UI/UX developer for experimental aviation platforms. Must be equipped to work with a team designing on-board networks, integrating comm systems, and deploying unconventional user interfaces leveraging game design.

1% equitty stake being offered.


Building humanitarian aircraft. We're a group of unconventional engineers solving aviation's hardest problems. It's a place un-encumbered by bureaucracy, where your responsibility is simply your work product, and your work product has a positive impact on the world.

Must be proficient in or equipped in similar:

    Unity/Blender Do178/FAR 23 Python/C+/C++ Photoshop Illustrator Microsoft Office Automotive Operating Systems

Ideal Attributes:

    Humble Communicator Do178/FAR 23 Familiar with aviation electronics regulatory and operational requirements Self-Directed Relevant experience in power generation/distribution Passionate About Orb's Vision Organized
Wide Knowledge Base Across Disciplines

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2469-2456-11534
Job Location: Lowell MI
Per Diem: --
Overtime: --
Start Date: 2021-12-02
Input Date: 12/03/2021
Last Updated: 03/28/2024
Firm Name: STRUCTURES COMPANY LLC
Attention: JR Gonsalves
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aviation Wire Harness Design - Mentor Graphics

Description:
Job responsibilities
Develops and maintains cable/wire harness detail and assembly designs. Analyzes results and performs design reviews. Develops and maintains electrical product detail, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry, antennas).Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Documents processes, specifications and procedures that support the design and manufacture of electrical commodities. Develops basic statements of work. Participates in technical review of supplier capabilities to facilitate source selection. Analyzes functional and physical input to assure development of complete integrated design. Works under general direction.

Minimum Requirements:
Candidates must meet the following requirements:
• Education: BSEE or equivalent technical degree with 3-5 years of relevant experience or MS with 2-4 years of relevant experience
• Proven experience with wire harnessing and design, including test
• Experience interpreting electrical schematics
• Experience with part selection and component trade studies
• Proficient with CAD modeling of harness assemblies
• Understands calibration techniques for electrical testing of equipment and cabling
• Proficient using EDA tools
• Experience with test planning and execution
• Experience with test procedure development and documentation
• Proficient using electrical test equipment including oscilloscopes, waveform generators, DMMs, and logic analyzers
• Strong analytical skills and ability to debug complex systems
• Process oriented and familiarity with problem tracking systems
• Ability to communicate effectively
• Ability to work independently and deliver on schedule commitments
• Candidates must be willing to work on-site at the Manassas, VA facility as needed
• Candidates must be U.S. Persons (U.S. Citizen or a Permanent Resident/Green Card Holder)

Candidates will have experience in some of the following areas:
• Aircraft avionics
• Experience with Mentor Graphics Capital tool
• Block diagramming with Microsoft Visio
• Experience supporting the manufacturing process from requirements through build and test
• Experience designing and/or testing analog power electronics, including 28VDC systems and 115VAC
• Familiarity with high voltage power systems for electric aircraft propulsion
• Experience with environmental qualification and stress testing of hardware
• Familiarity with high speed digital electronics, including serial data hardware interfaces
• IPC-620
• AS50881
• DO-160, DO-178 or DO-254
• ARP4761, ARP4754
• MIL-HDBK-516
• MIL-STD-810, MIL-STD-461, MIL-STD-704

TSC is an AA/EOE.
 
Job Location: Manassas, VA
Rate: $50-57/hr
Per Diem: Yes
Overtime: No
Duration: 12-months+
Start Date: ASAP
Input Date: 09/29/2021
Last Updated: 02/28/2023
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionic Openings: ME, Design, Production Support

Description:
Avionics/Electrical Design Engineer
a. Education: B.S. Engineering
b. Interpret electrical schematics
c. Design harness assemblies using Visio or an electrical library
d. Design Avionics installation and integration using Catia V5
e. Design Avionics enclosures, panels, and brackets
f. Experience with machined parts, sheet metal, and composite parts
g. Aircraft electrical wiring component selection (backshells, terminal blocks, splices)
h. Assist in connectivity and routing of wiring harnesses and mechanical configuration of top-level assemblies
i. Release flight test instrumentation installation drawings
j. Gather information on vehicle, 3D prototype, provide manufacturing support



Avionics/Electrical Engineer, Production support (AKA Liaison Engineer)
a. Education: B.S. Engineering
b. Provide avionics production support and drawing redlines
i. Engineer to provide support to technicians on harness assembly, harness installation, and harness terminations on-ship. Provide guidance and redlines if required.
c. Inspect avionics production work such as wire harness assembly and instrumentation
d. Experience with wire harness design and install drawings is a plus.
e. Experience with flight test instrumentation (strain gauges specifically) is a plus.
f. Performs other duties as assigned
g. 3rd and 4th shift positions



Avionics Manufacturing Engineer
a. Coordinate with production planning, quality, production control, and more to ensure avionics production work is executed smoothly
b. Work with avionics technicians and quickly resolve production obstacles
c. Develop manufacturing instructions, manufacturing aids, and tooling
d. Inspect production work is performed correctly
e. Qualifications:
i. Strong understanding of wire harness manufacturing process and formboard drawings
ii. Strong understanding of electronic assemblies with circuit boards
iii. Strong understanding of electrical schematics & termination drawings
iv. Strong understanding of EWIS principles for vehicle routing
v. Experience integrating wire harnesses in vehicle
vi. Experience working with technicians, production planning, quality, and more to ensure jobs are completed per schedule
vii. Extensive knowledge of aircraft-type wiring and components such as connectors, backshells, conduits, relays, switches, terminal junction system components, etc
viii. Catia V5 experience is a plus
ix. Experience with composite vehicles is a plus
x. Experience with schematics in Microsoft Visio is a plus






The Structures Company LLC is an AA/EOE.
 
Job Number: 538
Job Location: Mojave, CA
Rate: ***DOE***
Per Diem: Yes
Overtime: Possible
Duration: Long Term Contract
Start Date: ASAP
Input Date: 08/09/2022
Last Updated: 01/26/2023
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics / Electrical Design and Analysis Engineer 4

Description:

Very exciting opportunity to work with one of the world's largest aerospace companies!

The contracts are regularly extended and direct opportunities are often available.

Description:

Avionics/Electrical Design/Wire Design Engineer

Oklahoma City AMM Avionics and Flight Deck Integration is seeking experienced Avionics/Flight Deck and Electrical Design & Integration engineers. The candidate will provide engineering integration and support technical design decisions for Military Aircraft, Military Derivative Aircraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, B-1B, B-2, B-52 and others) and diverse projects including development of aircraft design and verification strategy and architecture, breakdown of verification requirements, design including equipment placement, wiring pin-to-pin, wire diagrams, lab harness design, lab harness installation, equipment installation, rack design, troubleshooting, lab automation, simulation, and verification activities for aircraft development and modifications within our Portfolios.

Other job responsibilities may include
Works with customers to develop and document complex avionics, electronic and electrical system requirements and design for aircrafts.
Analyzes and translates requirements into system architecture, hardware and software designs and interface specifications.
Analyzes results and performs design reviews
Develops and maintains electrical product detail, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry, antennas)
Supporting programs with the overall integration, Tests and validates to ensure system designs meet operational and functional requirements.
Analyzes functional and physical input to assure development of complete integrated design
Monitors supplier performance to ensure system integration and compliance with requirements.
Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle.
Participates in technical review of supplier capabilities to facilitate source selection

Basic Qualifications (Required Skills and Experience)
Experience in wire design tools such as Mentor Capital, WIRS, CEEDS, and/or an equivalent avionics wire design system is highly desired.
Experience with requirements management software (e.g. DOORS) AND/OR Model Based Systems Engineering (MBSE) and Model Based Engineering through-out the development lifecycle.
Experience on aircraft or avionics development program(s) and in engineering labs is a plus.
Must possess good organizational, interpersonal, and problem solving skills.
Must have demonstrated a strong work ethic and sense of urgency for completing assigned work with a history of meeting commitments.
Ability to adjust priorities to multiple demands and unanticipated events.
Highly motivated and must work well in a team environment.
The ability to communicate effectively, both verbally and in writing.

Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, Master's degree with 7 or more years' experience or PhD degree with experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering. ABET in electrical engineering is the preferred, although not required, accreditation standard.

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a robust 401K offering. In some cases there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2247-2244-11534
Job Location: Oklahoma City OK
Per Diem: --
Overtime: --
Start Date: 2022-01-11
Input Date: 11/09/2021
Last Updated: 09/27/2023
Firm Name: STRUCTURES COMPANY LLC
Attention: Kimra Stone
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Installer I

Description:


Education and Experience Requirements:

High School Diploma or GED required. General knowledge of applicable regulatory requirements and customer specifications. Must know how to use a multimeter. Entry level position. Six (6) months accredited schooling in aviation electronics or general electrical experience preferred.

Principle Duties and Responsibilities:

Essential Functions:

Assists in installations, modifications and the fabrication of wiring and electrical components, fixtures, and associated equipment in accordance with blueprints, worksheets, and engineering drawings. Assists with the completion of tasks within allotted time frame. Assists with maintaining required. logs and records. Complies with the company FOD program, tool control program, 5-S program and all safety regulations.

Additional Functions:

Properly care for and maintain shop equipment and tools as assigned by Supervisor. .

Perform other duties as assigned.

Other Requirements:

Technical Certificate in aircraft electrical assembly preferred. and/or successful completion in current year youth apprenticeship program sponsored by Gulfstream, in area of expertise. Ability to read and interpret basic blueprints and schematic diagrams. Strong written and verbal skills required. Computer skills and general software knowledge necessary.

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2460-2447-11534
Job Location: Savannah GA
Per Diem: --
Overtime: --
Start Date: 2021-12-02
Input Date: 12/03/2021
Last Updated: 09/21/2023
Firm Name: STRUCTURES COMPANY LLC
Attention: JR Gonsalves
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Technicians

Description:
STS Technical Services is hiring Avionics Technicians in Oscoda, Michigan.

Position Summary:

Install, inspect, test, adjust, or repair avionics equipment, such as radar, radio, navigation, and other control systems in aircraft.

Duties & Responsibilities:
Test and troubleshoot instruments, components, and assemblies, using circuit testers, oscilloscopes, or voltmeters.
Test electrical equipment or systems to ensure proper functioning.
Troubleshoot equipment or systems operation problems.
Keep records of maintenance and repair work.
Maintain repair or maintenance records.
Adjust, repair, or replace malfunctioning components or assemblies, using hand tools or soldering irons.
Install machine or equipment replacement parts.
Adjust equipment to ensure optimal performance.
Repair worn, damaged, or defective mechanical parts.
Install electrical and electronic components, assemblies, and systems in aircraft, using hand tools, power tools, or soldering irons.
Install electrical components, equipment, or systems.
Set up and operate ground support and test equipment to perform functional flight tests of electrical and electronic systems.
Test electrical equipment or systems to ensure proper functioning.
Assemble components such as switches, electrical controls, and junction boxes, using hand tools or soldering irons.
Assemble electrical components, subsystems, or systems.
Connect components to assemblies such as radio systems, instruments, magnetos, inverters, and in-flight refueling systems, using hand tools and soldering irons.
Install electrical components, equipment, or systems.
Lay out installation of aircraft assemblies and systems, following documentation such as blueprints, manuals, and wiring diagrams.
Lay out work according to specifications.
Interpret flight test data to diagnose malfunctions and systemic performance problems.
Analyze test or performance data to assess equipment operation.
Coordinate work with that of engineers, technicians, and other aircraft maintenance personnel.
Confer with coworkers to coordinate work activities.
Fabricate parts and test aids as required.
Fabricate parts or components.
Assemble prototypes or models of circuits, instruments, and systems for use in testing.
Assemble electrical components, subsystems, or systems.
Qualifications:
Valid FAA Airframe & Powerplant license
Previous experience working with avionic and electrical systems, or completion of a technical school program in a similar field of study
Must provide own tools
Ability to use time clock and company intranet
Manage time to effectively meet company priorities
Required Abilities:
Crawl in and out of tight spaces
Lay in a prone position for more than 4 hours
Comfortably work at elevated heights of at least 40 feet for extended periods of time
Lift balance, and carry 50 lbs.
Work in enclosed hangars and exterior weather conditions
Work in close proximity to other people
About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.

#ZR
 
Job Number: 35482
Job Location: Oscoda, MI
Input Date: 12/21/2021
Last Updated: 01/11/2022
Firm Name: STS AEROSTAFF SERVICES
Attention: Robert Ruedisueli
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics and Electrical Systems Installation Engineer

Description:
Minimum Requirements
Experience with avionics and electrical system design to the requirements of CFR 14 Part 25 is desired.
• Minimum 5 years of CATIA mechanical design experience for component and assembly design and drafting is required. Experience with CATIA V6 is preferred.
• Strong computer, written and verbal communication skills required.
• Time management skills are required to work multiple concurrent projects of various size and scope.
• Experience with Microsoft Office Word, Excel, PowerPoint are required, Visio experience is desired.
• Design knowledge of electrical bonding criteria, thermal cooling requirements for electronic equipment, EMI shielding, and High Intensity Radiated Fields (HIRF) / Indirect Effects of Lightning (IEL) installation criteria is considered a plus

Bachelor of Science in Mechanical Engineering, or Mechanical Engineering Technology from an ABET accredited institution is required.

Description/Comment:
The Avionics and Electrical Systems Installations engineer ensures that the installation of all avionics and electrical equipment on the aircraft meet environmental, functional, weight, cost, and structural requirements to support the highest standard of safety and customer reliability expectations.
========
If qualified, email a WORD version copy of your resume along with your hourly PAY RATE and then
call Peggy at 774-210-4108 Referrals appreciated!!
 
Job Number: PL Avionics
Job Location: KS & GA
Rate: 70/per hour
Per Diem: Possible
Overtime: Possible
Duration: 6-12+ months
Start Date: 2-3 weeks
Input Date: 04/23/2021
Last Updated: 02/10/2022
Firm Name: ADVANCED TECHNOLOGY
Attention: Peggy Sr. Recruiter
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics/Electronics Engineer

Description:


Unique Skills:

Avionics and/or Electrical system development and integration experience is required. Experience with the FAA (14 CFR Part 25) and/or EASA (CS-25) certification is required. Experience with Data Concentration Networking and/or Integrated Modular Avionics is preferred. Understanding of DO-160, DO-178 and DO-254 processes is preferred. System integration lab and/or aircraft functional testing and troubleshooting experience is preferred. ARP-4754A experience including requirements development, validation and verification is preferred. Experience with IBM DOORS or other requirements management database is preferred. Bachelor's Degree required equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job. Other Requirements Advanced degree in engineering related field preferred The level of technical skill and abilities appropriate for this grade will be established by each discipline


The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2693-2677-11534
Job Location: Savannah GA
Per Diem: --
Overtime: --
Start Date: 2022-01-12
Input Date: 01/13/2022
Last Updated: 09/21/2023
Firm Name: STRUCTURES COMPANY LLC
Attention: JR Gonsalves
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics/Electronics Engineer

Description:
Avionics and/or Electrical system development and integration experience is required.
• Experience with the FAA (14 CFR Part 25) and/or EASA (CS-25) certification is required.
• Experience with Data Concentration Networking and/or Integrated Modular Avionics is preferred.
• Understanding of DO-160, DO-178 and DO-254 processes is preferred.
• System integration lab and/or aircraft functional testing and troubleshooting experience is preferred.
• ARP-4754A experience including requirements development, validation and verification is preferred.
• Experience with IBM DOORS or other requirements management database is preferred.

Education:
• Bachelor's Degree required equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
• Other Requirements Advanced degree in engineering related field preferred
• The level of technical skill and abilities appropriate for this grade will be established by each discipline

Essential Functions:
Perform other duties as assigned.
 
Job Number: 24-653
Job Location: Savannah, GA
Rate: $65-$75/hr
Per Diem: Yes
Overtime: Possible
Duration: 1+ year
Start Date: ASAP
Input Date: 04/06/2022
Last Updated: 05/25/2022
Firm Name: PRECISION PERSONNEL INC
Attention: Sandra Balcerzak
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics/Electronics Engineer

Description:
Unique Skills:

Avionics and/or Electrical system development and integration experience is required. Experience with the FAA (14 CFR Part 25) and/or EASA (CS-25) certification is required. Experience with Data Concentration Networking and/or Integrated Modular Avionics is preferred. Understanding of DO-160, DO-178 and DO-254 processes is preferred. System integration lab and/or aircraft functional testing and troubleshooting experience is preferred. ARP-4754A experience including requirements development, validation and verification is preferred. Experience with IBM DOORS or other requirements management database is preferred. Bachelor's Degree required equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job. Other Requirements Advanced degree in engineering related field preferred The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 13500
Job Location: Savannah, GA
Overtime: Yes
Input Date: 01/12/2022
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Teresa Bailey
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Business Analyst - Level 3

Description:
Inconen is looking for a Business Analyst - Level 3 for our client, a well-known Aerospace Company, in Canoga Park, CA.

**Candidates must be a U.S. Citizen without Dual Citizenship**
**Our client mandates that all employees and contractors must be fully vaccinated for COVID-19**

Duties:
-Gather data from multiple electronic sources and assemble the data in compliance with customer reporting needs
-Conducts special analyses/studies to assist in the development of solutions for complex reporting analysis
-Interfaces with engineers performing project tasks and to determine alignment of those tasks expenditures within the reporting structure
-Interprets procurement regulations and prevailing customer requirements

Skills:
Required Skills:
-Exceptional analysis, excel and data management skills
-Experience with Aerospace Financial or Business Management is a plus
-Experience with Government SDRL’s, the FAR and the old or new CSDR format is highly desired.
-Familiarity with WBS structures and EVMS terminology is helpful

Education:
-Bachelors Degree
 
Job Number: 17451
Job Location: Canoga Park, CA
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 3 Mos
Start Date: ASAP
Input Date: 12/23/2021
Last Updated: 01/14/2022
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CREO Designer

Description:
Performs design and drafting of both electrical and mechanical aspects of electrical/electronic equipment. Designs wiring harnesses; performs layout drawing and checking of schematic diagrams as supplied in rough form by electrical engineering; makes wiring diagrams from schematic diagrams (vice-versa). Performs overall line replaceable unit (LRU) chassis and housing design/drafting, including overall system packaging. Selects LRU/wiring harness components such as electrical connectors, electrical accessories, wire, shielding, shield terminators, terminal lugs, etc. Produces schematic diagrams and/or CAD drawings for submission to customers, plant, operations or outside vendors to produce the specified LRU/wiring harnesses and cable assemblies. Output must be able to be entered directly into data management configuration control.
 
Job Number: 58866
Job Location: Phoenix, Az
Rate: 48
Duration: 6 months
Start Date: ASAP
Input Date: 01/12/2022
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Rick Nussbaum
Address: 1857 WELLS RD STE 216
City, State: ORANGE PARK, FL 32073
Phone: 904/562-3214
800 Phone: 866/277-3343
Fax Phone: 904/713-2000
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Circuit Design Engineer (Chandler, AZ) 2861-1, 4016-1

Description:
Circuit Design Engineer (Chandler, AZ) 2861-1, 4016-1
12 month contract

Pay rate: $55-60/hr W2

Analog / Mixed-signal Circuit Design Engineer

Electrical engineer to design board level electronic circuits and equipment for aerospace avionics.
Requirements:
-BSEE and 5 years, or MSEE and 3 years of mixed signal circuit design experience.
-Proficiency with simulation, Pspice and Cadence Schematic Capture.
-Proficiency in hardware troubleshooting / software debugging.
-Physical testing experience including proficiency with lab measurement equipment (oscilloscope, logic analyzer, etc).
-Ability to clearly communicate complex technical concepts verbally and in written form.
Position includes generation of design documents, specifications, user's manuals, test plans, analyses, etc.
 
Job Number: 4016-1
Job Location: Chandler, AZ
Rate: 60
Per Diem: Yes
Overtime: yes
Duration: 12 months
Start Date: ASAP
Input Date: 01/07/2022
Last Updated: 01/31/2022
Firm Name: TALENTPRO CONSULTING
Attention: Angelia
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Interior Design Engineer 4

Description:


Unique Skills:

Mechanical-Interior Design Engineer: Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations. Other responsibilities will include the installation of Avionics/Electronic components such as Exterior Antennas, Avionics LRUs and Aircraft structure modifications necessary for the installation of components. Design engineer will employ design standards consistent with company standards, accepted design methods are executed under the direction of the Mechanical Engineering Lead. Additional responsibilities are out lined in the job description and as assigned by the Mechanical Engineering Lead. Creation of monuments in Catia V5, must be familiar with FAA design standards. Must work with little supervision and be a willing team member that will perform work accurately combining sound experience with a common-sense approach. The qualified individual will adhere to aggressive schedules and budget requirements.

Duties and Responsibilities include:

Selecting appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
Anticipates and resolves complex issues in creative and effective ways, developing standards and guidelines for diverse engineering activities
Approach to problem solving balances technical product, cost and schedules.
Work without appreciable direction; work is reviewed from a long-range perspective for desired results
Proficient in CATIA V5-SmarTeam/Enovia.

Office Products such as Power Point, Project, Word and Excel
CHS/EWIS/EHI Methodology

AutoCAD Knowledge is a plus.

Education and Experience Requirements
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
Job Description

Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues . Is consulted extensively by associates and others as a recognized authority within the field . Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities . Approach to problem solving balances technical product, cost and schedule . Works without appreciable direction; work is reviewed from a long-range perspective for desired results . Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative .

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2528-2512-11534
Job Location: Dallas TX
Per Diem: --
Overtime: --
Start Date: 2021-12-08
Input Date: 12/09/2021
Last Updated: 09/21/2023
Firm Name: STRUCTURES COMPANY LLC
Attention: JR Gonsalves
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Interior Design Engineers needed!!!

Description:
Design of interior furnishings and amenities (Custom cabinetry, galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing)
• Proficient in CATIA V5-SmarTeam/Enovia.
 
Job Number: BR181119
Job Location: GA, TX, WI
Rate: 60-78
Per Diem: Split
Overtime: Possible
Duration: 12+ months
Start Date: ASAP
Input Date: 06/03/2022
Last Updated: 07/15/2022
Firm Name: ADVANCED TECHNOLOGY
Attention: Brittany
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Mechanical Interior Design Engineer - Eng. Contractor 4

Description:
Inconen is looking for a Completions Mechanical Interior Design Engineer - Eng. Contractor 4 for our client, a well-known Aerospace Company, in Dallas, TX.

**Candidates must be a U.S. Citizen or Permanent Resident**

Mechanical-Interior Design Engineer:
-Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
-Examples include custom cabinetries such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
-Other responsibilities will include the installation of Avionics/Electronic components such as Exterior Antennas, Avionics LRUs and Aircraft structure modifications necessary for the installation of components.
-Design engineer will employ design standards consistent with company standards, accepted design methods are executed under the direction of the Mechanical Engineering Lead.
-Additional responsibilities are out lined in the job description and as assigned by the Mechanical Engineering Lead.
-Creation of monuments in Catia V5, must be familiar with FAA design standards.
-Must work with little supervision and be a willing team member that will perform work accurately combining sound experience with a common-sense approach.
-The qualified individual will adhere to aggressive schedules and budget requirements.

Duties and Responsibilities include:
-Selecting appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
-Anticipates and resolves complex issues in creative and effective ways, developing standards and guidelines for diverse engineering activities
-Approach to problem solving balances technical product, cost and schedules.
-Work without appreciable direction; work is reviewed from a long-range perspective for desired results
-Proficient in CATIA V5-SmarTeam/Enovia.
-Office Products such as Power Point, Project, Word and Excel
-CHS/EWIS/EHI Methodology
-AutoCAD Knowledge is a plus.

Education and Experience Requirements
-Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
-10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors.
-Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

Position Purpose:
-Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

Principle Duties and Responsibilities:
Essential Functions:
-Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues.
-Is consulted extensively by associates and others as a recognized authority within the field.
-Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities.
-Approach to problem solving balances technical product, cost and schedule.
-Works without appreciable direction; work is reviewed from a long-range perspective for desired results.
-Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative.

Additional Functions:
-Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
-Perform other duties as assigned.

Other Requirements:
-Advanced degree in engineering, or related curriculum preferred.
-The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 17384
Job Location: Dallas, TX
Rate: $68.25 - $75.60/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 12/08/2021
Last Updated: 01/31/2022
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Configuration Analyst 2 (Plymouth, MN) 5108-1

Description:
Configuration Analyst 2 (Plymouth, MN) 5108-1
Contract

Pay rate: $53-66/hr


Position Description: As a Configuration Analyst the work activities include supporting a wide variety of programs and projects across the Engineering and Operations Organization. The employee will be part of the Systems Engineering, Integration & Test Team in the control and release of a wide variety of documents and drawings in utilizing the Siemens Product Lifecycle Management (PLM) tools of Teamcenter Enterprise Product Information Center (ePIC) and Teamcenter Unified Architecture (UA).

Detailed Job Description:

As a Configuration Analyst (CA) the applicant will be required to create and update Configuration Management Plans, Data Management Plans using Microsoft Word to process and release documents utilizing the Siemens Product Lifecycle Management (PLM) Teamcenter tools of Enterprise Product Information Center (ePIC) and Teamcenter Unified Architecture (UA). In addition, the candidate will be required to lead the Configuration Management/Data Management (CM/DM) discipline on programs and be able to support the various program or project Integrated Product Teams (IPTs) in the area of adhering to proper CM/DM practices to help ensure company work instructions and processes are followed. Also, the CA will be required to enter new part number information into the Deltek Cost Point System to ensure parts and components can be procured to enable fabrication and build. Additional tasks will be to perform product configuration baselines and assessments within the Teamcenter ePIC tool, and able to lead various Configuration Control Board (CCB) meetings in a business office environment. The generation, release, and delivery of Contract/Supplier Data Requirements Listings (CDRLs/SDRLs) to our Contract Group electronically will also be an important part of the responsibility of the CA to ensure that the delivered items meet contractual requirements. Other activities will include interfacing and coordinating with program managers, customers, suppliers, planners, design team members, and other various departments of the company.

Required Skills:

• A minimum of 2 years of work experience performing as a Configuration Analyst.
• Understanding and the proper application of the CM Standard of ANSI/EIA-649, as well as the American Society of Mechanical Engineers (ASME) Standards – Specifically ASME Y14.100, Y14.34, Y14.35, and Y14.5-1994 (or later).
• Able to assemble customer deliverables as CDRLs and SDRLs, as well as program data per the Program Management Plan (PMP).
• Able to support a variety of programs and able to multitask efficiently for the major milestone reviews on programs.
• Able to support various programs and projects during the same day and can quickly jump between tasks.
• Able to communicate clearly – both verbally and in writing effectively to management and cross functional team members.
• Security regulations require that the individual must be a U.S. Citizen.
 
Job Number: 5108-1
Job Location: Plymouth, MN
Rate: 65
Per Diem: Yes
Overtime: yes
Duration: 12 Month
Start Date: ASAP
Input Date: 01/07/2022
Last Updated: 01/31/2022
Firm Name: TALENTPRO CONSULTING
Attention: TIMOTHY MAHANEY
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Conformity Management Engineering Lead

Description:
General Summary:

Interact with Engineering Leads and DERs to understand the criteria for determining the need for FAA conformity inspection
Interact with other parts of the organization to ensure that the data in company systems reflect the engineering definition and is sufficient to successufully plan conformity plannning.
Provide accurate and concise reports that reflect current status and trends.
Recommend actions to correct possible deviations and / or concerning trends
Work with its own team and IS to create a database to collect, reconcile and correct discrepant data in company systems.


Duties and Responsibilities:

Coordinate the work and support the team that will:
Reconcile what is planned to be conformed to data in company system
Entry of “Required Conformity” in Company electronic form
Create objects in Teamcenter to hold information related to items requiring FAA conformity that do not exist in Teamcenter
Support the creation of RFCs in Teamcenter
Reconcile / ensure existence of QRs for released drawings requiring conformity
Create and keep updated a “database” to hold or connect the following information
Enter SCM information in the RFC
Track the completion of RFC in Teamcenter
Enter RFC information in NACIP
Reconcile RFC needs with what SAP QNs that track it have
Create associated reports
Communicate status to management and other departments
Follow up on DERs answers to Discrepancies


Qualifications

Education, Work Experience, Certificationa and/or Licensure

BS in Data Management / Business Administration / Engineering
Mininum of 5 years working with FAA related processes of conformity inspection
Excellent data analysis and communication skills
Minimum of 5 years as advanced user of Product Life-Cycle management products, preferably Teamcenter.
Proficient user of Microsoft Office tools, especially Excel


Knowledge, Skills, and Abilities:

Ability to adapt to and work effectively within a dynamic environment
Ability to look beyond the obvious to identify solutions. Understands requirements; able to logically handle daily operational situations;
Ability to present effectively to diverse and demanding audiences.
Personality requirements
Persistent
Excellent negotiation skills
Reliable
Self motivated
Pro-active
Focused
Works well in teams and minimum supervision
Flexible
Goal and detail oriented

The Structures Company LLC is an AA/EOE
 
Job Number: 516
Job Location: Greensboro, NC
Rate: $55-$65/Hr. **DOE**
Per Diem: Yes
Overtime: Possible
Duration: Long Term Contract
Start Date: ASAP
Input Date: 08/12/2022
Last Updated: 09/01/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract Avionics Installer Sr

Description:


Unique Skills:

Aircraft furniture avionics installs and plumbing installs. Basic computer and office suite experience.

Education and Experience Requirements
High School Diploma or GED required. Two (2) years of accredited schooling in aviation electronics and two (2) years related work experience; or four (4) years experience in an avionics/electronic career field. Ability to read and interpret blueprints and schematic diagrams.

Position Purpose:

Leads, supports, and assists the efforts of technicians performing avionics installations. Fabricates wire harnesses, installs, terminates, ring-out, and assists in functional test of avionics/electrical systems.
Job Description

Principle Duties and Responsibilities:

Essential Functions:

Provides work direction to technicians. Ensures completion of tasks within allotted time frame. Coordinates with and assists other departments to ensure on-time delivery of aircraft. Installs/modifies/fabricates wiring and electrical components, fixtures, and associated equipment in accordance with blueprints, worksheets, engineering drawings. Trains other team members in associated work assignments. Uses ability as a skilled specialist to contribute to the development of employees and techniques. Completes work in innovative and effective ways . Assists Engineering in resolving problems and makes repairs per engineering direction. Maintains required. logs and records. Ensures that work accomplished meets applicable regulatory requirements and customer specifications. . Enforces the company FOD program, tool control program, 5-S program and all safety regulations. Checks all work, including other team members, to ensure a defect free assembly prior to final inspection.

Additional Functions:

1. Properly care for and maintain shop equipment and tools as assigned by Supervisor. . 2. Coordinate shift changes in team leaders absence. . 3. Participate in continuous improvement activities (e.g YIAW, Kaizen events, etc.) . 4. Assists and fills in for team coordinator as required. .

Perform other duties as assigned.

Other Requirements:

Possess a working knowledge of the Gulfstream Policies and Procedures manual, Inspection Procedures manual, and pertinent Process Specifications. Possess the proven ability to move to new tasks with only a minimal, short-term impact to established goal hours and schedule. Strong written and verbal skills required. Computer keyboard skills necessary.

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2569-2553-11534
Job Location: Savannah GA
Per Diem: --
Overtime: --
Start Date: 2021-12-14
Input Date: 12/15/2021
Last Updated: 09/21/2023
Firm Name: STRUCTURES COMPANY LLC
Attention: JR Gonsalves
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer NX

Description:
JOB DUTIES:
• Expert in modeling in NX required
• Experience designing structure and generating dwgs and models that are released
• Experienced in GTOL dimensioning required
• Experience with Teamcenter preferred
• Bachelor degree in Engineering
• 5+ years of design engineering experience
• Good communication and presentation skills required

Analyzes, researches and develops structural engineering specifications involving metals, non-metallic or composite structural materials for product design, or operation of product to include structures, mechanical, hydraulic, electrical and electronics, heating and ventilating, equipment and maintenance designs. Analyzes damage tolerance, durability, design allowables and structural modeling. Specific structural engineering specialties may include dynamics and loads, stability and stress fatigue and thermal analysis. Tools utilized may include CATIA, IDEAS, ProEngineer and a variety of software applications.
 
Job Location: Centennial, CO
Input Date: 01/12/2022
Last Updated: 01/17/2022
Firm Name: AGREEYA SOLUTIONS
Attention: Utkarsh Singh
Address: 605 COOLIDGE DR STE 200
City, State: FOLSOM, CA 95610
Phone: 916/351-2545
Website: www.agreeya.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer 3

Description:

This is a very exciting opportunity to work with one of the world's largest aerospace companies!

The contracts are regularly extended and direct opportunities are often available.

Electronic Flight Control Systems Test Engineer

Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

Additional Job Description

Position is to fill an immediate demand for Flight Control System level testing using National Instruments based toolsets. Must have a solid knowledge of understanding FCS level requirements, the process to decompose and trace, and the required teamwork to work in a dynamic and fast pace team execution plan.

Qualifications:
- Experience testing complex systems; aerospace systems testing preferred
- Experience testing systems using National Instruments tools (software/hardware)
- Experience 10+ yrs, but will consider less if skillset includes a combination of aerospace & National Instruments use
- Familiarity with DO-178 certification in testing
- Some software development experience may be helpful, as this role will interact with the software team

------------------------------------------
Skills: Flight Control Systems
Competencies: Design / Produce Process Communication Continuous Learning Customer Focus Innovation / Creativity Business Acumen Safety Awareness Quality Systems Thinking Analytical Skills (Technical) Engineering Processes Design Concepts & Techniques Engr Knowledge/Comprehension Electronic/Electrical Domain Analog/Digital Signal Proc Certification & Qualification Circuit Design Electronic System Design Requirements Hardware/Software Development
Additional Skills:
Skills: Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a 401K offering. In some states and on some openings there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2697-2681-11534
Job Location: Ridley Park PA
Per Diem: --
Overtime: --
Start Date: 2022-03-17
Input Date: 01/14/2022
Last Updated: 09/27/2023
Firm Name: STRUCTURES COMPANY LLC
Attention: Tania Martinez
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer 4

Description:

Very exciting opportunity to work with one of the world's largest aerospace companies!

The contracts are regularly extended and direct opportunities are often available.

Description:

Leads work with customers to develop and document complex electronic and electrical system requirements. Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications. Leads work to test and validate to ensure system designs meet operational and functional requirements. Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches technology advances for potential application to company business needs. Makes recommendations for technology investments.
What are the Top 3-5 Technical/Software Skills needed to perform this role/job?
Analog/Digital Signal Proc
Analytical Skills (Technical)
Circuit Design
Design / Produce Process
EMI/EMC
Combination of remote/onsite. Needs to be local but can work from home a few days a week
OT is possible
6 months duration with possibility for extension

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a robust 401K offering. In some cases there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2236-2233-11534
Job Location: Everett WA
Per Diem: --
Overtime: --
Start Date: 2022-03-08
Input Date: 11/06/2021
Last Updated: 09/27/2023
Firm Name: STRUCTURES COMPANY LLC
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer 5 - x 8 openings!!!

Description:

Very exciting opportunity to work with one of the world's largest aerospace companies!

The contracts are regularly extended and direct opportunities are often available.

Description:Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects. Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications. Leads testing and validation work on complex system designs to assure that operational and functional requirements are met. Works with other to develop program test strategies. Manages performance of critical suppliers to ensure system integration and compliance with requirements. Conducts program independent reviews and reports results to program leadership. Provides critical support of fielded hardware and software over the entire product lifecycle. Leads research into technology advances for potential application to company business needs. Makes recommendations for technology investments. Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.

Keywords required: system safety analysis, system validation & verification, flight safety.
o Leads work with customers to develop and document complex electronic and electrical system requirements.
o Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications.
o Leads work to test and validate to ensure system designs meet operational and functional requirements.
o Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements.
o Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle.
o Researches technology advances for potential application to company business needs.
o Makes recommendations for technology investments.
Bachelor's degree with 14 or more years' experience, Master's degreee with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a 401K offering. In some states and on some openings there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2134-2137-11534
Job Location: Everett WA
Per Diem: --
Overtime: --
Start Date: 2022-04-20
Input Date: 12/10/2021
Last Updated: 11/28/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Kimra Stone
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EE Technical Designer 3 - Mechanical/Electronic/Electrical Design

Description:
Description

Develops, maintains and releases electrical/mechanical drawings, systems designs or engineering documentation and data by applying company, industry and governmental standards. Using design tools prepares documentation and incorporates design changes. Creates, develops and maintains systems designs by preparing design layouts, modifying existing designs and assisting in identifying design discrepancies. Supports engineering system design and functionality validation activities. Develops and maintains product installation designs and part designs ranging from simple to moderately complex. Coordinates activities and products with internal partners and external suppliers. Works under general direction.

2-3 years of experience in electrical or mechanical engineering
Assembly experience preferred
Experience with supplier relations
Bachelor’s degree preferred, but not required

6 months with the possibility for extension or to become permanent employee. Candidate will need to be local or willing to relocate as this is an on-site role. 
 
Job Number: 46836-1
Job Location: Berkeley, MO
Rate: DOE
Per Diem: Yes
Overtime: Yes
Duration: 6-12 months+
Start Date: ASAP
Input Date: 11/08/2021
Last Updated: 01/28/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Garrett Smart
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design ( Azusa, CA ) 5350-1 Zuken

Description:
Electrical Design ( Azusa, CA ) 5350-1 Zuken
6 Month Contract

Pay rate: Open

The successful applicant will perform design and analysis of cable assemblies required for multiple Military and Civil space programs. Candidate must have experience in cable design using Zuken software. The position requires working with multi-discipline functions in a team environment to ensure that the product meets requirements. Specific assignments may include deriving design requirements, developing cable diagrams, part selection and full cable design in Zuken software. Ability to perform electronic circuit design and analysis a plus.

Basic Qualifications:
• Bachelor's degree in a STEM field (Science, Technology, Engineering, Math)
• 5 years of electrical design and analysis experience
• Experience with cable design using Zuken software
US Citizenship required
 
Job Number: 5350-1
Job Location: Azusa, ca
Rate: Open
Per Diem: Yes
Overtime: yes
Duration: 6 Months
Start Date: ASAP
Input Date: 01/07/2022
Last Updated: 01/31/2022
Firm Name: TALENTPRO CONSULTING
Attention: TIMOTHY MAHANEY
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Analysis Engineer // Multiple Locations also

Description:
Design and Analysis Engineer 4

Location: Everett, WA/ Renton, WA/ Seattle, WA
Duration: 12 Months

Description:
Leads work with customers to develop and document complex electronic and electrical system requirements. Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications. Leads work to test and validate to ensure system designs meet operational and functional requirements. Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches technology advances for potential application to company business needs. Makes recommendations for technology investments.

Education / Experience:
Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctor of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Skills:
Good lab testing,
Knowledge of client processes and tools
EEE,
Computer engineering,
Design concepts and techniques,
Electronics system design,
EMI/EMC,
Safety Awareness,
systems thinking

Previous client experience is a plus but not required.

Skill Code: 664-Electronic Sys Design & Analy
 
Job Location: Everett, WA
Rate: $65/hr
Per Diem: Split
Overtime: Yes
Duration: 12 months
Start Date: ASAP
Input Date: 05/01/2023
Last Updated: 08/10/2023
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

Electrical Design Engineer - Powertrain

Description:

Designing and simulating High voltage power systems with an emphasis on building and demonstrating prototypes. You'll design and test generator and power distribution prototype systems using primarily off the shelf components. Preferably lots of hands-on integration experience paired with the latest in design and simulation.

    Technical Knowledge of High Torque and Speed Electric Motor & Actuation Systems Produce Quality Documentation to Communicate across the Engineering Team Effectively Architect Power Distribution and Balancing Across Systems.

Preferred Skills:

    Dassault Systems 3DS Microsoft Office MATLAB Electric Motor Design Electronic Speed Controller Design Python/C+

Ideal Attributes:

    Humble Communicator Self-Directed Passionate About Orb's Vision Organized (Practice 5S) Wide Knowledge Base Across Disciplines

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2477-2463-11534
Job Location: Lowell MI
Per Diem: --
Overtime: --
Start Date: 2022-02-07
Input Date: 12/03/2021
Last Updated: 03/28/2024
Firm Name: STRUCTURES COMPANY LLC
Attention: JR Gonsalves
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design and Analysis Engineer 3

Description:
Analyzes customer and system requirements to develop basic architectural approaches and detailed specifications for various electronic products. Develops high-level and detailed designs consistent with requirements and specifications. Validates designs through various methods of review, testing and analysis. Identifies, tracks and statuses technical performance measures to measure progress and ensure compliance with requirements. Supports Supplier Management with make/buy recommendations and other technical services of limited scope. Provides engineering support throughout the lifecycle of the product. Investigates emerging technologies to develop concepts for future product designs to meet projected requirements. Works under general direction.

Job responsibilities (from SJC skill level description):
Analyzes customer and system requirements to develop basic architectural approaches and detailed specifications for various electronic products. Develops high-level and detailed designs consistent with requirements and specifications. Validates designs through various methods of review, testing and analysis. Identifies, tracks and statuses technical performance measures to measure progress and ensure compliance with requirements. Supports Supplier Management with make/buy recommendations and other technical services of limited scope. Provides engineering support throughout the lifecycle of the product. Investigates emerging technologies to develop concepts for future product designs to meet projected requirements. Works under general direction.

Minimum Requirements:
Candidates must meet the following requirements:
BSEE or equivalent technical degree with 3-5 years of relevant experience or MS with 2-4 years of relevant experience
Ability to translate requirements to design
Experience with high level architectural design and component selection
Proven experience performing an electronic detailed design, including schematic capture
Proficient using EDA tools
Experience with test planning and execution
Experience with test procedure development and documentation
Proficient using electrical test equipment including oscilloscopes, waveform generators, DMMs, and logic analyzers
Strong analytical skills and ability to debug complex systems
Process oriented and familiarity with problem tracking systems
Ability to communicate effectively
Ability to work independently and deliver on schedule commitments
Candidates must be willing to work on-site at the Manassas, VA facility as needed
Candidates must be U.S. Persons (U.S. Citizen or a Permanent Resident/Green Card Holder)

Desired Requirements:
Candidates will perform all work on-site at the Manassas, VA facility

Candidates will have experience in some of the following areas:
Aircraft avionics
Experience with Mentor Graphics Capital tool
Block diagramming with Microsoft Visio
Experience supporting the manufacturing process from requirements through build and test
Experience designing and/or testing analog power electronics, including 28VDC systems and 115VAC
Familiarity with high voltage power systems for electric aircraft propulsion
Experience with environmental qualification and stress testing of hardware
Familiarity with high speed digital electronics, including serial data hardware interfaces
DO-160, DO-178 or DO-254
ARP4761, ARP4754
MIL-HDBK-516
MIL-STD-810, MIL-STD-461, MIL-STD-704

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2073-2076-11534
Job Location: Manassas VA
Per Diem: --
Overtime: --
Start Date: 2022-01-13
Input Date: 11/24/2021
Last Updated: 09/27/2023
Firm Name: STRUCTURES COMPANY LLC
Attention: JR Gonsalves
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Electrical Engineer

Location: Heath, OH/Hybrid (requires to work onsite 2-3 days/week)
Duration: 12 Months

Description:
Analyzes customer and system requirements to develop basic architectural approaches and detailed specifications for various electronic products.
Develops high-level and detailed designs consistent with requirements and specifications.
Validates designs through various methods of review, testing and analysis.
Identifies, tracks and statuses technical performance measures to measure progress and ensure compliance with requirements.
Supports Supplier Management with make/buy recommendations and other technical services of limited scope.
Provides engineering support throughout the lifecycle of the product.
Investigates emerging technologies to develop concepts for future product designs to meet projected requirements.
Works under general direction.

Qualifications:
- Bachelor's degree or higher in Engineering; Electrical Engineering or combination engineering and Journeyman
- Engineering circuit analysis
- Engineering systems
- Failure Analysis

Experience Level:
5-10 years relevant experience; may come from another industry

Competencies:
Design Concepts & Techniques Engr Knowledge/Comprehension Communication Continuous Learning Customer Focus Innovation / Creativity Business Acumen Safety Awareness Quality Systems Thinking Analytical Skills (Technical) Engineering Processes

Education / Experience:
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 5 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD, Master+3 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.
 
Job Number: 21-29159
Job Location: Heath, OH
Per Diem: split
Overtime: possible
Duration: 12 months
Start Date: Immediate
Input Date: 01/04/2022
Last Updated: 01/14/2022
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 859 STEPHENSON HWY
City, State: TROY, MI 48083
Phone: 843/955-9221
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Job id- 48956

Description:
We have an Excellent Contract position for an Electrical Engineer. This position is 100% remote.

The Pay rate is between $70.00 and $80.00 DOE- If you are interested, please reply to my email at maria.gomez@adeccona.com

Job Responsibilities:
• Researches, designs, develops, modifies, evaluates, and tests a variety of electronic equipment and systems, including radar and radiation detection equipment; radio, television, and other communications equipment and systems; circuitry components; analog and digital computers; and control and test equipment.
• Conducts experimental tests on equipment and evaluates results.
• Develops specifications for selecting components and equipment to use.
• May also review vendors' abilities to support development.
• Establishes operational objectives and assignments.
• Objectives are reviewed by senior management to determine the success of the operation.
• Involved in developing, modifying, and executing company policies that affect immediate operation(s) and may also have a company-wide effect.
• Works on extremely complex problems where analysis of situations or data requires an evaluation of intangible variables.
• Exercises independent judgment in developing methods, techniques, and evaluation criteria for obtaining results.
• Decisions or failure to achieve goals will result in critical delay(s) in schedules and/or unit operations and may jeopardize overall business activities.
• Regularly interacts with senior management or executive levels on matters concerning several functional areas, divisions, and/or customers.
• Requires the ability to change the thinking of, or gain acceptance of others in sensitive situations.
• Works under consultative direction toward predetermined long-range targets.
• Determines and pursues courses of action essential in obtaining desired outcomes.
• Acts independently to determine methods and procedures on new assignments.
• May manage and be responsible for staff development and supervision.
• Involves complete knowledge of this administrative field and the ability to complete difficult and complex assignments. Has a complete understanding of the job.

Basic Hiring Criteria:
• Bachelor's degree in related field and 8+ years related experience.
• Utility & Distribution experience
• AutoCAD

This particular client is requiring that all new hires show proof of vaccination. However, accommodations will be made for those with disabilities or religious reasons who cannot obtain a vaccine.

Benefits offered to vary by the contract. Depending on your temporary assignment, benefits may include direct deposit, free career counseling services, 401(k), select paid holidays, short-term disability insurance, skills training, employee referral bonus, affordable medical coverage plan, and DailyPay (in some locations). For a full description of benefits available to you, be sure to talk with your recruiter.

VEVRAA Federal Contractor / Request Priority Protected Veteran Referrals / Equal Opportunity Employer / Veterans / Disabled
The Company will consider qualified applicants with arrest and conviction records.
To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit http://www.tadpgs.com/candidate-privacy/
 
Job Number: 48956
Job Location: Cypress, CA
Rate: $70.00
Per Diem: NO
Overtime: YES
Duration: 12 Month
Start Date: ASAP
Input Date: 01/06/2022
Last Updated: 02/16/2022
Firm Name: TAD PGS INC
Attention: Maria Gomez
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer III

Description:
We are currently seeking exceptional candidates who wish to be a part of the commercial space revolution. The position we are seeking is for an Electrical Engineer III.

Our fun, fast-paced and collaborative team designs, builds, and flies a state of the art Cargo System, an ambitious flagship program to create our Nation's only commercially reusable space plane. With your help, we will conduct many safe and successful missions over the next decade to deliver critical cargo to and from the International Space Station. These flights for NASA will enable us to build an unprecedented commercial space transportation network, which provides affordable, cutting-edge orbital capability and return to Earth services onto runways around the globe. The future of space transportation is now.
The Electrical Engineer III will be responsible for planning and execution of activities, development of test documentation (test plans, procedures, scripts and reports etc.), supporting test reviews, executing various test activities, supporting anomaly resolution, test data analysis and generation of test reports in conjunction with the other AS&C groups in order to successfully verify the Electrical System and its interfaces with other systems.

Must-haves:
*Bachelor's of Science degree in Electrical Engineering or other related discipline and typically 6 or more years of relevant experience
*Electrical Power System hardware/software test experience
*Excellent communication skills required
*Excellent written skills required
*Excellent attention to detail
*Knowledgeable in the use of various electronic systems analysis and test equipment. Experience with testing, verification and validation
*Able to correctly read and understand electronic drawings/schematics and other technical engineering or documentation (e.g. Specs, ICDs, Users Guides etc.)
*Ability to decompose large complicated problems into manageable pieces, understand problems from different points of view, and explain issues/solutions to other engineers and management
*The candidate must be comfortable interacting with and coordinating with subject matter experts whose depth of knowledge may exceed their own while still providing a perspective that comes with breadth of knowledge

Preferred:
*Experience with data acquisition, sensors and recording systems
*Experience working with integrated product teams
*Experience with modeling electronic circuit (Spice)
*Experience with requirements management and verification
*Experience working with DOORS or other verification tool
*Background in the Aerospace and Defense Industry.
*Experience working with NASA; human spaceflight program experience is a bonus
*Exposure to simulations through functional and logical models and system analysis
*Experience composing and analyzing Electrical Load Analysis (ELA), circuit modeling, simulation, and analysis
*Knowledge of industry-standard electrical design principles, to include, but not limited to model-based definition, electrical component selection, manufacturing, and production processes
*Experience in digital or analog circuit design and schematic capture
*Ability to work in a highly collaborative, fast paced environment with emphasizes in rapid prototyping and fielding of capabilities
*Ability to rapidly work with minimal supervision on projects involving both small and large engineering teams

IMPORTANT NOTICE:
To conform to U.S. Government international trade regulations, applicant must be a U.S. Citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State or U.S. Department of Commerce.
 
Job Location: Denver, CO
Rate: $49/HR-$53/HR
Per Diem: Possible
Overtime: Possible
Duration: Long Term Contract
Start Date: ASAP
Input Date: 10/06/2021
Last Updated: 08/24/2023
Firm Name: STRUCTURES COMPANY LLC
Attention: Corey Halliday
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer III

Description:
An Electrical Engineer III job in Louisville, CO is currently available through Belcan. In this role, you will be responsible for planning and execution of activities, development of test documentation (test plans, procedures, scripts and reports etc.), supporting test reviews, executing various test activities, supporting anomaly resolution, test data analysis and generation of test reports in conjunction with the other groups in order to verify the Electrical System and its interfaces with other systems. To be considered for this role, you will have a Bachelor of Science Degree in Electrical Engineering or other related discipline and a minimum of 6 or more years of relevant experience.

Electrical Engineer III Job duties:

* Electrical Power System hardware/software test experience.
* Knowledgeable in the use of various electronic systems analysis and test equipment. Experience with testing, verification and validation.
* Able to correctly read and understand electronic drawings/schematics and other technical engineering or documentation (e.g. Specs, ICDs, Users Guides etc.).
* Ability to decompose large complicated problems into manageable pieces, understand problems from different points of view, and explain issues/solutions to other engineers and management.
* The candidate must be comfortable interacting with and coordinating with subject matter experts whose depth of knowledge may exceed their own while still providing a perspective that comes with breadth of knowledge.

Qualifications:

* Experience with data acquisition, sensors and recording systems.
* Experience with modeling electronic circuit (Spice).
* Experience composing and analyzing Electrical Load Analysis (ELA), circuit modeling, simulation, and analysis.
* Background in the Aerospace and Defense Industry. Experience working with NASA; human spaceflight program experience is a bonus.

If you are interested in this Electrical Engineer III position in Louisville, CO please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 316964
Job Location: Louisville, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 10/07/2021
Last Updated: 04/29/2022
Firm Name: BELCAN TECHSERVICES
Attention: FrancisOsolnick
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer III (Contract)

Description:
Are you ready to unleash your technical creativity? Dream, Innovate, Inspire and Empower the next generation to transform humanity through technology and imagination!
    Electrical engineers research, design, develop, test, certify, deploy and improve cutting edge products and services. These cover a very wide range from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. You'll conceptualize and design new products and processes throughout the product lifecycle from analog and digital electronic circuit card assemblies to fully integrated systems.

Must-haves:

    Bachelor's of Science degree in Electrical Engineering or other related discipline and typically 10 or more years of relevant experience

    Demonstrated knowledge of engineering principles and practices

    Experience with Computer Aided Engineering tools

    Progressive experience working in multi-disciplinary design and development teams

    Ability to create wiring diagrams and Harness drawings using Capital Logic / Harness XC

Preferred:

    Exposure to simulations through functional and logical models and system analysis

    Background in the Aerospace and Defense Industry

    Experience composing and analyzing Electrical Load Analysis (ELA), circuit modeling, simulation, and analysis

    Familiarity with design requirements related to High Intensity Radiated Field (HIRF) and Indirect Effects of Lightning (IEL)

    Knowledge of industry-standard electrical design principles, to include, but not limited to model-based definition, electrical component selection, manufacturing, and production processes

    Familiar with Electro Magnetic Effects (EME) to include, Electro Magnetic Compatibility (EMC) and Electro Magnetic Interference (EMI)

    Experience in digital or analog circuit design and schematic capture

    Understanding of the printed circuit board layout process and tools

IMPORTANT NOTICE:

To conform to U.S. Government international trade regulations, applicant must be a U.S. Citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State or U.S. Department of Commerce.

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2620-2604-11534
Job Location: Louisville CO
Per Diem: --
Overtime: --
Start Date: 2022-05-16
Input Date: 12/27/2021
Last Updated: 01/17/2023
Firm Name: STRUCTURES COMPANY LLC
Attention: Corey Halliday
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer III (Contract)

Description:
Are you ready to unleash your technical creativity? Dream, Innovate, Inspire and Empower the next generation to transform humanity through technology and imagination!
    Electrical engineers research, design, develop, test, certify, deploy and improve cutting edge products and services. These cover a very wide range from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. You'll conceptualize and design new products and processes throughout the product lifecycle from analog and digital electronic circuit card assemblies to fully integrated systems.

Must-haves:

    Bachelor's of Science degree in Electrical Engineering or other related discipline and typically 10 or more years of relevant experience

    Demonstrated knowledge of engineering principles and practices

    Experience with Computer Aided Engineering tools

    Progressive experience working in multi-disciplinary design and development teams

    Ability to create wiring diagrams and Harness drawings using Capital Logic / Harness XC

Preferred:

    Exposure to simulations through functional and logical models and system analysis

    Background in the Aerospace and Defense Industry

    Experience composing and analyzing Electrical Load Analysis (ELA), circuit modeling, simulation, and analysis

    Familiarity with design requirements related to High Intensity Radiated Field (HIRF) and Indirect Effects of Lightning (IEL)

    Knowledge of industry-standard electrical design principles, to include, but not limited to model-based definition, electrical component selection, manufacturing, and production processes

    Familiar with Electro Magnetic Effects (EME) to include, Electro Magnetic Compatibility (EMC) and Electro Magnetic Interference (EMI)

    Experience in digital or analog circuit design and schematic capture

    Understanding of the printed circuit board layout process and tools

IMPORTANT NOTICE:

To conform to U.S. Government international trade regulations, applicant must be a U.S. Citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State or U.S. Department of Commerce.

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2437-2425-11534
Job Location: Louisville CO
Per Diem: --
Overtime: --
Start Date: 2022-05-16
Input Date: 11/25/2021
Last Updated: 02/01/2023
Firm Name: STRUCTURES COMPANY LLC
Attention: Corey Halliday
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer III (Contract)

Description:
Are you ready to unleash your technical creativity? Dream, Innovate, Inspire and Empower the next generation to transform humanity through technology and imagination!
    Electrical engineers research, design, develop, test, certify, deploy and improve cutting edge products and services. These cover a very wide range from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. You'll conceptualize and design new products and processes throughout the product lifecycle from analog and digital electronic circuit card assemblies to fully integrated systems.

Must-haves:

    Bachelor's of Science degree in Electrical Engineering or other related discipline and typically 10 or more years of relevant experience

    Demonstrated knowledge of engineering principles and practices

    Experience with Computer Aided Engineering tools

    Progressive experience working in multi-disciplinary design and development teams

    Ability to create wiring diagrams and Harness drawings using Capital Logic / Harness XC

Preferred:

    Exposure to simulations through functional and logical models and system analysis

    Background in the Aerospace and Defense Industry

    Experience composing and analyzing Electrical Load Analysis (ELA), circuit modeling, simulation, and analysis

    Familiarity with design requirements related to High Intensity Radiated Field (HIRF) and Indirect Effects of Lightning (IEL)

    Knowledge of industry-standard electrical design principles, to include, but not limited to model-based definition, electrical component selection, manufacturing, and production processes

    Familiar with Electro Magnetic Effects (EME) to include, Electro Magnetic Compatibility (EMC) and Electro Magnetic Interference (EMI)

    Experience in digital or analog circuit design and schematic capture

    Understanding of the printed circuit board layout process and tools

IMPORTANT NOTICE:

To conform to U.S. Government international trade regulations, applicant must be a U.S. Citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State or U.S. Department of Commerce.

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2438-2426-11534
Job Location: Louisville CO
Per Diem: --
Overtime: --
Start Date: 2022-02-23
Input Date: 11/25/2021
Last Updated: 11/28/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Corey Halliday
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Design Engineer

Description:
JOB DESCRIPTION
Leads work with customers to develop and document complex electronic and electrical system requirements. Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications. Leads work to test and validate to ensure system designs meet operational and functional requirements. Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product life cycle. Researches technology advances for potential application to company business needs. Makes recommendations for technology investments.
 
Job Number: 46427-1
Job Location: El Segundo, CA
Rate: $71/hourly
Per Diem: Split
Overtime: Possible
Duration: 6 mos
Start Date: Now
Input Date: 01/28/2022
Last Updated: 10/07/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Jorge Garcia
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical/Mechanical Assembly Specialist

Description:
Job Description:

Performs complex production assembly operations and inspections on electronic/electrical and mechanical assemblies and subassemblies. Performs rework, repair and modification to parts and assemblies. Presents statistical data to team for analysis and problem resolution. Provides complex periodic maintenance on machines and tooling and complex machine set up tasks following machine inspection checklists. Coordinates with manager and other departments to coordinate work flow and resolve issues. Performs complex rework, repair and modification to parts and assemblies. Assembles and delivers kits. Performs simple receiving and inspections procedures on incoming materials. Documents inspection results in accordance with applicable procedures. Coordinates with management or other departments to establish work priorities. Updates work status documentation. Works under minimal supervision.

---------------------------

Position Responsibilities:

%u2022 Performs complex rework, repair and modification to parts and assemblies (e.g. soldering on electronic assemblies 90% of the time and mechanical assemblies 10% of the time).
%u2022 Performs complex production assembly operations on electronic/electrical and mechanical assemblies and subassemblies.
%u2022 Coordinates with supervisor and other departments to coordinate work flow and resolve issues.
%u2022 Coordinates with supervisor to establish work priorities.
%u2022 Works under minimal supervision.

Required:
%u2022 Must have 5+ yrs experience soldering components on PC board assemblies


Basic Qualifications (Required Skills/Experience):
%u2022 Minimum of High School Diploma or GED.
%u2022 More than 5 years of experience in electronics and electro-mechanical assemblies.
%u2022 More than 5 years of experience in a manufacturing or assembly environment.
%u2022 More than 5 years of experience performing soldering and electronics repair to the component level.
%u2022 More than 5 years of experience utilizing and following detailed work instructions, reading and interpreting blueprints, drawings, or specifications.


Preferred Qualifications (Desired Skills/Experience):
%u2022 Current IPC-7711/IPC-7721 certification for Rework and Repair of Electronic Assemblies.


Typical Education/Experience:

%u2022 Education/experience typically acquired through basic education (e.g. High School diploma/GED) and typically 7 or more years' related work experience or an equivalent combination of education and experience (e.g. vocational school/Associate+5 years' related work, Bachelor+2 years' related work, etc.)

Relocation:

%u2022 Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace: our client is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

--------------------------
Competencies: Information Technology Fluency, General Shop Processes, Engineering Drawings & Specs, Assembly Tools, Assembly Process, Teamwork, Continuous Learning, Accountability and Responsibility, Continuous Improvement, Adaptability, Change Management, Certification & Qualification.
 
Job Number: JPC - 1757
Job Location: Germantown, MD
Rate: $34.00/hr
Per Diem: Split
Overtime: Yes
Duration: 6 months
Start Date: ASAP
Input Date: 01/28/2022
Last Updated: 08/30/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Jorge Garcia
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electro Mechanical Assemblers

Description:
STS Technical Services is hiring Electro Mechanical Assemblers in Menomonee Falls, Wisconsin. 

Position Overview:

Ideal candidates will be flexible and able to alternate between jobs as workloads dictate.  The assembler may work alone or in a team and is responsible for achieving allocated times for the tasks they are performing with good quality.  The successful candidate will also be able to read and interpret blueprints, wiring diagrams, and work in low volume, high mix manufacturing with build-to-print projects.

In order to maintain this position, all candidates must successfully complete the required basic training program for assembly in first 75 days which includes obtaining certifications required to perform the assembly, followed by successfully completing hands-on training. This direct hire position operates under a collective bargaining agreement and pays $19.23/hr, plus benefits.

Essential Duties and Responsibilities:
Assembly and/or wiring of motor controllers, including building to print of production sub-assemblies, using blueprints, specialized hand tools, and following stringent quality specifications
Read, understand and work to product documentation (blueprints)
Correctly generate detailed assembly records documenting actions taken
Interface with quality representatives, manufacturing engineers, and/or customer representatives to ensure the highest possible quality on product manufactured in the time allotted and/or required
With guidance and oversight (from higher level Assembler) assemble, wire, and/or case pre-production products
Visually inspect work previously performed by others
Perform necessary changes, modifications, and/or repairs as directed
Maintain good housekeeping and safe work environment
Access and use of electronic data mechanisms such as digital paper and electronic mail
Perform other duties and assist in projects, as directed by supervision
Basic Qualifications:
High School Diploma or equivalent.
1-2 years’ experience in assembly of mechanical and electronic components, including point-to-point wiring.
Electrical and Mechanical aptitude
Ability to read and interpret blueprints and wiring diagrams and use as an assembly guide
Demonstrated 10th grade reading and math ability; able to document accurately and clearly.
Ability to work independently and also contribute as a team member
Basic knowledge of, and ability to use, hand tools for assembly, and perform actions such as crimping, lugging, and point-to-point wiring
Attention to detail and able to follow written and oral instructions
Desirable Qualifications, Skills and Knowledge:
2+ years comparable manual assembly experience is strongly preferred
Physical Requirements:
Ability to lift up to 35 pounds frequently
Ability to stand for up to 9 hours a day
Walking, lifting, bending, stooping and kneeling
About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.

#ZR
 
Job Number: 37039
Job Location: Menomonee Falls, WI
Input Date: 12/21/2021
Last Updated: 01/11/2022
Firm Name: STS AEROSTAFF SERVICES
Attention: Brittany Kimmitt
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic Tech (Dulles, VA) 4884-1

Description:
Electronic Tech (Dulles, VA) 4884-1
Pay rate: Open


PRIMARY DUTIES AND RESPONSIBILITIES:
Under close supervision, performs routine technical functions related to the support of development engineering activities such as design, test, checkout, fabrication, modification, and assembly of electronics and Electro-mechanical systems, experimental design circuitry, prototype models or specialized test equipment. Applications may include analog, digital and/or video type circuits and logic systems. Guidance is readily available from superiors. Works from schematics, diagrams, written and verbal descriptions, layouts or defined plans to perform routine testing, checkout, troubleshooting, prototype building, environmental testing, and simple developmental engineering tasks. Performs routine operational tests and fault isolation on development systems and equipment to ensure conformance with design specifications. Diagnoses and isolates malfunctions down to component level. Conducts defined engineering tests and collects data as assigned. Utilizes routine development or diagnostic equipment including oscilloscope, VOM, DVM, signal generators and similar test apparatus. Normally assigned in area such as development, engineering, test equipment design, or the like. Excludes those assigned to production test activities. Entry Level. Excludes trainees with no academic preparation or experience.

EXPERIENCE and TRAINING: Electronics training equivalent to 2 years technical trade school or military technical school.
 
Job Number: 4884-1
Job Location: Dulles, VA
Rate: Open
Per Diem: Yes
Overtime: yes
Duration: 6 Months
Start Date: ASAP
Input Date: 01/07/2022
Last Updated: 01/31/2022
Firm Name: TALENTPRO CONSULTING
Attention: TIMOTHY MAHANEY
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer

Description:
Position Overview:
Client designs, builds and manufactures lithium-ion energy storage solutions and battery systems with a focus on heavy duty
transportation, on- and off-grid electrical, mass transit and task-oriented applications. The Embedded Software Engineer will receive
and interpret internal and customer requirements and develop embedded controller software solutions that meet/exceed capability,
cost, and quality requirements.
Essential Job Functions
▪ Adheres to safety standards, with high degree of regard to employee and subcontractor safety
▪ Analyzes data and feedback from the field for possible software algorithm improvement, and participates in root cause
analysis efforts as required
▪ Perform code construction
▪ Adheres to change management and revision control procedures
▪ Designs, builds, and tests code to satisfy design requirements and concepts
▪ Support software validation and works closely with hardware and test engineers
▪ Assists in performing system-specific training for owner / operator of the lithium power system
▪ Builds and promotes the company’s “team” philosophy and respects existing cultural boundaries
▪ Demonstrates and executes performance in the best interest of EnerDel, stakeholders, and customers
▪ Develops bench tests and verification plans for various software solutions
▪ Develops software design documentation including flow diagrams, state machines, pseudo code, memory maps, etc.
▪ Ensures adherence to EnerDel’s quality management system
▪ Interfaces across engineering groups as well as business development and project management teams
▪ Keeps management and customers informed of project progress and issues
▪ Participates in advanced battery controls development and new concept design teams
▪ Participates in code reviews with attention to highlighting any possible problem areas, as well as offering possible solutions to
address issues
▪ Participates in internal and customer design concept reviews
▪ Participates in manufacturing test specification and design
▪ Performs value engineering to provide cost effective results while maintaining customer satisfaction
▪ Proactively works with development teams and manufacturing to ensure a successful product launch
▪ Produces technical deliverables with documentation and maintain revision control
▪ Travel may be required (~15% travel (domestic/international))
▪ Perform other duties as assigned

Required Knowledge, Skills, & Abilities
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below
are representative of the knowledge, skills, and ability required.
▪ Preferred:
o B. S. or M.S. degree in Electrical Engineering, Computer Science, or related discipline
o 5-7 years of embedded ‘C’ development
o Technical writing skills
o Programming experience in C++, C#, .NET and/or language suitable for Windows-based tools
o Proficient with CAN (J1939, 2.0B, other variants), Modbus, and Ethernet/IP communications protocols
o Ability to work with real time operating systems, control algorithms for maintaining lithium battery systems, various
communications protocols for interfacing to third party devices, bootloaders, and device drivers for microprocessor
peripherals (including CAN communications)
o Ability to read electronic schematics and use electronic tools such as oscilloscopes, digital volt meters, and serial
communications monitors as well as debuggers, emulators, and other embedded software development tools
o Automotive and/or battery experience a plus
o Ability to work on high voltage (400, 800, 1200VDC) systems
 
Job Number: 13412
Job Location: Indianapolis, IN
Start Date: 1/29/2022
Input Date: 01/07/2022
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Teresa Bailey
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer (Flight Controls)

Description:
804 Technology is currently looking for an Embedded Software Engineer for a long term contract job opportunity located in Fort Worth TX. The Embedded Software Engineer will be responsible for (but not limited to) the following:
• Design and test of Flight Control System (FCS) and Avionics System with embedded DO-178 software and complex hardware, including DO-254.
• System and software design, requirements management, systems specifications, interface management, system safety assessment, verification and validation testing, and documentation for system and software requirements in a laboratory or desktop simulation environment, aircraft flight test, and aircraft/system qualification and certification.
• Perform formal software development through design for requirements and requirements verification with C/C++ code and MathWorks toolsets
• Develop and update requirements and verification traceability
• Conduct software integration and testing on target hardware
• Develop, implement, document, and review Low-Level Test (LLT) and High-Level Test (HLT) software cases and expected results
• Perform LLT and HLT execution on desktop environment and target electronic hardware in a lab environment
• Participation in development of subsystems architecture, redundancy management, electronic hardware design and integration, and actuator design and integration
My contact information is listed below. If you are interested please respond be sending me your resume and your availability. Salary is based on experience and Per Diem is available to those that qualify. Thank you in advance for your time.

Embedded S/W Engineer – 429 Program:
The 429 Embedded Software Engineer works in Ft. Worth, TX and will be responsible for (but not limited to) the following:
• Design and test of Flight Control System (FCS) and Avionics System with embedded DO-178 software and complex hardware, including DO-254.
• System and software design, requirements management, systems specifications, interface management, system safety assessment, verification and validation testing, and documentation for system and software requirements in a laboratory or desktop simulation environment, aircraft flight test, and aircraft/system qualification and certification.
• Perform formal software development through design for requirements and requirements verification with C/C++ code and MathWorks toolsets
• Develop and update requirements and verification traceability
• Conduct software integration and testing on target hardware
• Develop, implement, document, and review Low-Level Test (LLT) and High-Level Test (HLT) software cases and expected results
• Perform LLT and HLT execution on desktop environment and target electronic hardware in a lab environment
• Participation in development of subsystems architecture, redundancy management, electronic hardware design and integration, and actuator design and integration

Education Requirements:
• Bachelor’s Degree is required. Major in Computer Engineering, Software Engineering, or Computer Science is preferred. Bachelor’s Degree in Physics, Electrical, Aerospace, or Mechanical Engineering will be considered with sufficient software development experience.
• Master’s Degree in the Engineering disciplines mentioned above is suggested

Position Requirements:
• Experience at all levels will be considered with a minimum of 5 years specific experience with embedded software development. Preference will be given for additional work in sensor and actuator controls, avionics, or electrical systems integration, development, and testing.
• Experience with DO-178 Level A software or other embedded software development and testing is required.
• Familiarity with RTCA DO-178, RTCA DO-254, SAE ARP4754A, SAE ARP4761, 14 CFR Part 27 and Part 29 for commercial and military qualification and certification of aircraft systems
• Experience with Primary Development Environment:
• MathWorks MATLAB / Simulink with Stateflow and Embedded Coder
• C/C++ code
• C# test scripts
• Serena Dimensions / PVCS
• Git
• Embedded Software Development environments

Don Shell
804 Technology
Technical Recruiter
817-800-0935
dshell@804technology.com

804 Technology is an equal opportunity employer.

All qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, disability or national origin.
 
Job Number: 13580107
Job Location: Fort Worth, TX
Rate: $70.00 to $100.00 hourly
Per Diem: Possible
Overtime: Possible
Duration: 12+ months
Start Date: ASAP
Input Date: 02/03/2023
Last Updated: 02/13/2023
Firm Name: 804 TECHNOLOGY
Attention: Don Shell
Address: 5381 HIGHWAY N STE 201
City, State: COTTLEVILLE, MO 63304
Phone: 636/928-0330
Fax Phone: 636/530-3693
Website: www.804technology.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Technician II

Description:
Are you looking for a challenging opportunity that leverages your technical expertise? We may have the position you are seeking!

As an Engineering Technician II, you will be using your skills and expertise to perform a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. You'll be responsible for constructing, troubleshooting, calibrating, testing, and maintaining our equipment, components, devices, or systems. You'll ensure our systems and components meet established specifications.

Must-haves:
*Associate's degree in a related field of study and at least 2 years of relevant experience
*A higher level degree may substitute for experience
*Related experience may be considered in lieu of required education
*Ability to read and understand mechanical and electrical drawings, diagrams, schematics, and manuals
*Ability to work with standard laboratory test equipment, other measurement equipment, hand tools, and power tools

Preferred:
*Previous experience and/or certifications within the aerospace and defense industry
*Previous experience in a manufacturing environment
*Experience with AutoCAD or other 3-D CAD software
*The ability to obtain and maintain a Security Clearance may be required Learn more about *the background check process for Security Clearances

IMPORTANT NOTICE:
To conform to U.S. Government international trade regulations, applicant must be a U.S. Citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State or U.S. Department of Commerce.
 
Job Location: Middleton, WI
Rate: $25/HR - $29.50/HR
Per Diem: Possible
Overtime: Possible
Duration: Long Term Contract
Start Date: ASAP
Input Date: 10/04/2021
Last Updated: 02/28/2023
Firm Name: STRUCTURES COMPANY LLC
Attention: Corey Halliday
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Experience Systems Engineer 3

Description:

This is a very exciting opportunity to work with one of the world's largest aerospace companies!

The contracts are regularly extended and direct opportunities are often available.

Description:

Experience Systems Engineer

Applies an interdisciplinary, collaborative approach to plan, design, develop and verify a lifecycle balanced system of systems and system solutions. Evaluates customer and /operational needs to define and coordinate system performance requirements, integrate technical parameters and assure compatibility of all physical, functional and program interfaces. Performs various analyses to optimize total system of systems and/or system architecture. Performs analyses for affordability, safety, reliability, maintainability, testability, human systems integration, survivability, vulnerability, susceptibility, system security, regulatory, certification, product assurance and other specialties quality factors into a preferred configuration to ensure mission success. Develops the planning, organization, implementation and monitoring of requirements management processes, tools, risk, issues, opportunity management and technology readiness assessment processes. Resolves cross-functional technical issues.

Responsibilities May Include:
Apply interdisciplinary, collaborative approaches to plan, design, develop and verify system solutions.
Define and coordinate system performance requirements and integrate technical parameters.
Develop and document electronic and electrical system requirements
Perform analysis to optimize total system and/or system architecture to solve complex missile defense problems.
Define high level functional and performance requirements and verification methods, subsequent analysis, decomposition, and derivation of requirements, allocation of those lower-level requirements to physical and functional architectural elements, and tracking them through design, verification, integration, and operational validation
Develop verification and validation methods, processes, logic, and plans in support of program milestones.
Analyze and translate requirements into system architecture, hardware and software designs and interface specifications
Perform analyses for affordability, safety, reliability, maintainability, testability, survivability, human systems integration, survivability, vulnerability, susceptibility, system security, regulatory, certification, product assurance, product security (cyber security) and other specialties quality factors into a preferred configuration to ensure mission success.
Utilization of Model-Based Systems Engineering (MBSE) tools such as DOORS, Cameo, and mathematical modeling and simulation to develop system definitions and perform trade studies in assigned areas
Systems and Performance Analysis, Model & Sim, Algorithm Development Responsibilities May Include:
Evaluate systems under various scenarios and architectures to determine and/or optimize overall system mission performance in a framework giving insight into performance
Perform analysis to optimize total system of systems and/or system architecture to solve complex missile defense problems.
Develop and maintain analysis tools of varied fidelity including modeling and simulation tools to predict performance against evolving threats of current and future missile defense systems
Perform systems analyses of the existing system architecture in conjunction with new technologies and concepts for improvements to be considered for future architectures
Develop, refine and document key algorithm capabilities to support various DoD customers
Conducts analysis of multiple targets discrimination for survivability, vulnerability, and susceptibility into a preferred configuration to ensure mission success

Model Based Engineering / Systems Engineering
Development of Model-Based Systems Engineering (MBSE) tools, processes and architectures
Configuration, data and work flow management of program specific MBSE tools and processes
Establishment of protocol / process for integration of engineering tools with MBSE
Examples of current open positions / typical work scope:
Model Based Engineering Team:
of Model-Based Systems Engineering (MBSE) tools, processes and architectures for missile and weapons systems. Responsible for tailoring and deploying MBE/MBSE techniques to MWS Programs.

Preferred Qualifications (Desired Skills/Experience):
Experience applying systems engineering processes and principles
Experience/domain knowledge of system architecture, requirements, interface definition, verification, and validation
Experience with complex systems development and integration
Experience modeling or simulating complex systems
Experience with implementation and maintenance of systems engineering tools, schedules and metrics (i.e. Earned value management, DOORs, CAMEO)
Experience with Model Based Systems Engineering
Understanding of statistical analysis, distributions, and sampling
6 months possible extension
This position requires that you work on-site in OKC, candidate must be local or willing to relocate at own expense

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a robust 401K offering. In some cases there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2341-2331-11534
Job Location: Oklahoma City OK
Per Diem: --
Overtime: --
Start Date: 2022-01-10
Input Date: 11/10/2021
Last Updated: 09/27/2023
Firm Name: STRUCTURES COMPANY LLC
Attention: Kimra Stone
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FPGA Digital Engineer - 3

Description:
Selected candidate will be a part of a fast-paced team that develops new products for the on orbit signal processing of infrared imagery for national assets that help to protect the country.
Primary assignment will be the design and analysis of digital signal processing electronics for space systems using the latest available space technologies such as on-orbit programmable Field Programmable Gate Arrays (FPGA), Systems on a Chip (SoCs), multi-gigabit SERDES communication, on-board processing Single Board Computers (SBCs) and more.
This includes working through all phases of a development program including requirements definition and refinement, requirement flow-down and allocation, design, coding, and verification.

Education
Bachelor's degree in electrical, electronics, computer engineering, or related STEM degree & 5 years of related engineering experience, OR
Master's Degree in electrical, electronics, computer engineering, or related STEM degree & 3 years of related engineering experience

Basic Qualifications:
Experience with Field Programmable Gate Arrays (FPGAs)

Preferred Qualifications:
Master's degree in electrical, electronics, computer engineering, or related specialty (Digital signal processing, VLSI, etc)
Experience with multi-gigabit SERDES communication
Experience implementing image processing algorithms in FPGAs
Experience with design, analysis, and architecture of digital signal processing electronics systems

PDS Tech, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status.
 
Job Number: 94253
Job Location: Azusa, CA
Rate: 60.00
Per Diem: Split
Overtime: Possible
Duration: 12 Months
Start Date: ASAP
Input Date: 01/04/2022
Last Updated: 01/12/2022
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Kerry Moreland, Sr
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FPGA Engineer

Description:
Summary:
The primary assignment will be the design and analysis of digital signal processing electronics for space systems using the latest available space technologies such as on-orbit programmable Field Programmable Gate Arrays (FPGA), Systems on a Chip (SoCs), multi-gigabit SERDES communication, on-board processing Single Board Computers (SBCs) and more.
This includes working through all phases of a development program including requirements definition and refinement, requirement flow-down and allocation, design, coding, and verification.

Basic Qualifications:
Bachelor's degree in electrical, electronics, computer engineering, or related STEM degree & 5 years of related engineering experience, OR a Master's Degree in electrical, electronics, computer engineering, or related STEM degree & 3 years of related engineering experience
Experience with Field Programmable Gate Arrays (FPGAs)

Preferred Qualifications:
Master's degree in electrical, electronics, computer engineering, or related specialty (Digital signal processing, VLSI, etc)
Experience with multi-gigabit SERDES communication
Experience implementing image processing algorithms in FPGAs
Experience with design, analysis, and architecture of digital signal processing electronics systems

PDS Tech, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status.
 
Job Number: 98699
Job Location: Azusa, CA
Rate: 60.00
Per Diem: Split
Overtime: No
Duration: 12 Months
Start Date: ASAP
Input Date: 01/04/2022
Last Updated: 01/12/2022
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Kerry Moreland, Sr
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Website: www.pdstech.com

Fabrication Specialist

Description:

This is a very exciting opportunity to work with one of the world's largest aerospace companies!

The contracts are regularly extended and direct opportunities are often available.

Description:

JOB DESCRIPTION
Performs machine set-up, machining, welding set-up, welding, sheet metal fabrication and extrusion, tube bending and fabrication tasks. Performs composite lay-up, fabrication and assembly tasks. Assembles precision mechanical and electro-mechanical components. Assembles, repairs, modifies and installs various power plants and drive trains. Perform soldering on electronic and avionics products. Assembles and installs wire harnesses and avionics products. Prepares test articles, fixtures and data collection devices to perform various tests. Performs basic organic chemical conversion and paint preparation. Applies routine organic coatings for corrosion protection and appearance requirements. Works on articles of moderate complexity using established drawings and requirements.

OTHER
-Onsite position only
-20 positions
-These positions are available for 1st OR 2nd shift: (6:45am-3:30pm OR 3:30pm-12am)

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a 401K offering. In some states and on some openings there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 1645-1648-11534
Job Location: Salt Lake City UT
Per Diem: --
Overtime: --
Start Date: 2022-01-04
Input Date: 12/30/2021
Last Updated: 03/28/2024
Firm Name: STRUCTURES COMPANY LLC
Attention: Kimra Stone
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fabrication Specialist

Description:
JOB DESCRIPTION
Performs machine set-up, machining, welding set-up, welding, sheet metal fabrication and extrusion, tube bending and fabrication tasks. Performs composite lay-up, fabrication and assembly tasks. Assembles precision mechanical and electro-mechanical components. Assembles, repairs, modifies and installs various power plants and drive trains. Perform soldering on electronic and avionics products. Assembles and installs wire harnesses and avionics products. Prepares test articles, fixtures and data collection devices to perform various tests. Performs basic organic chemical conversion and paint preparation. Applies routine organic coatings for corrosion protection and appearance requirements. Works on articles of moderate complexity using established drawings and requirements.

OTHER
-Onsite position only
-20 positions
-These positions are available for 1st OR 2nd shift: (6:45am-3:30pm OR 3:30pm-12am) 
 
Job Number: JPC-1645
Job Location: Salt Lake City, UT
Rate: 21HR
Input Date: 01/28/2022
Last Updated: 10/07/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Diego villegas
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fabrication Specialist A

Description:

This is a very exciting opportunity to work with one of the world's largest aerospace companies!

The contracts are regularly extended and direct opportunities are often available.

Job Description

Seeking a CNC Machinist (Level A) to support the Team in Salt Lake City, Utah.

Position Responsibilities:
Performs machine set-up, machining, welding set-up, welding, sheet metal fabrication and extrusion, tube bending and fabrication tasks.
Performs composite lay-up, fabrication and assembly tasks.
Assembles precision mechanical and electro-mechanical components.
Assembles, repairs, modifies and installs various power plants and drive trains.
Perform soldering on electronic and avionics products.
Assembles and installs wire harnesses and avionics products.
Prepares test articles, fixtures and data collection devices to perform various tests.
Performs basic organic chemical conversion and paint preparation.
Applies routine organic coatings for corrosion protection and appearance requirements.
Works on articles of limited complexity following established drawings and requirements.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. 120.15 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee.

Basic Qualifications (Required Skills/Experience):
Ability to work any shift/weekends/nights/overtime as business conditions dictate.
Minimum 1 years' experience in Aerospace, Fabrication, or Manufacturing experience.
Minimum 1 years' experience with machining.

Preferred Qualifications (Desired Skills/Experience):
Experience in a team environment.
Team Leadership (Formal/Informal) experience.

Typical Education/ Experience:

Education/experience typically acquired through basic education (e.g. High School diploma/GED) and typically 1 or more years' related work experience or an equivalent combination of education and experience (e.g. vocational school/Associate).
Additional Skills:
If candidate does not have CNC experience, manager will require them to attend a self paced training class (3-4 months). If candidate does have CNC experience, this training is not required. If they attend the training, it is about 10 miles from the SLC site.
Skills: Education/experience typically acquired through basic education (e.g. high school diploma/GED).

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a 401K offering. In some states and on some openings there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2510-2496-11534
Job Location: Salt Lake City UT
Per Diem: --
Overtime: --
Start Date: 2022-03-29
Input Date: 12/30/2021
Last Updated: 09/27/2023
Firm Name: STRUCTURES COMPANY LLC
Attention: Tania Martinez
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fabrication Specialist A

Description:

This is a very exciting opportunity to work with one of the world's largest aerospace companies!

The contracts are regularly extended and direct opportunities are often available.

JOB DESCRIPTION
Performs machine set-up, machining, sheet metal fabrication and extrusion, tube bending and fabrication tasks. Performs composite lay-up, fabrication and assembly tasks. Assembles precision mechanical and electro-mechanical components. Assembles, repairs, modifies and installs various power plants and drive trains. Perform soldering on electronic and avionics products. Assembles and installs wire harnesses and avionics products. Prepares test articles, fixtures and data collection devices to perform various tests. Performs basic organic chemical conversion and paint preparation. Applies routine organic coatings for corrosion protection and appearance requirements. Works on articles of moderate complexity using established drawings and requirements.

OTHER
Onsite position only
20 positions
Aiming to start in batches (2-3) ASAP
These positions are available for 1st OR 2nd shift: (6:45am-3:30pm OR 3:30pm-12am) PLEASE LEAVE WHAT SHIFT YOUR CANDIDATE IS INTERESTED IN IN THE SUMMARY SECTION
**Please note: candidates must be willing to work either 1st or 2nd shift. The placement will be determined by the team that they're assigned. While we'd like to accommodate everyone's preference, it's likely that most will end up on 2nd shift at some point. **
Additional Skills:

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a 401K offering. In some states and on some openings there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2062-2065-11534
Job Location: Salt Lake City UT
Per Diem: --
Overtime: --
Start Date: 2022-01-13
Input Date: 01/04/2022
Last Updated: 09/27/2023
Firm Name: STRUCTURES COMPANY LLC
Attention: Tania Martinez
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fabrication Specialist A

Description:

This is a very exciting opportunity to work with one of the world's largest aerospace companies!

The contracts are regularly extended and direct opportunities are often available.

Performs machine set-up, machining, welding set-up, welding, sheet metal fabrication and extrusion, tube bending and fabrication tasks. Performs composite lay-up, fabrication and assembly tasks. Assembles precision mechanical and electro-mechanical components. Assembles, repairs, modifies and installs various power plants and drive trains. Perform soldering on electronic and avionics products. Assembles and installs wire harnesses and avionics products. Prepares test articles, fixtures and data collection devices to perform various tests. Performs basic organic chemical conversion and paint preparation. Applies routine organic coatings for corrosion protection and appearance requirements. Works on articles of moderate complexity using established drawings and requirements.
Additional Skills:

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a 401K offering. In some states and on some openings there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2274-2267-11534
Job Location: New Orleans LA
Per Diem: --
Overtime: --
Start Date: 2022-02-08
Input Date: 12/31/2021
Last Updated: 09/27/2023
Firm Name: STRUCTURES COMPANY LLC
Attention: Tania Martinez
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fabrication Specialist A

Description:

This is a very exciting opportunity to work with one of the world's largest aerospace companies!

The contracts are regularly extended and direct opportunities are often available.

JOB DESCRIPTION
Performs machine set-up, machining, welding set-up, sheet metal fabrication and extrusion, tube bending and fabrication tasks. Performs composite lay-up, fabrication and assembly tasks. Assembles precision mechanical and electro-mechanical components. Assembles, repairs, modifies and installs various power plants and drive trains. Perform soldering on electronic and avionics products. Assembles and installs wire harnesses and avionics products. Prepares test articles, fixtures and data collection devices to perform various tests. Performs basic organic chemical conversion and paint preparation. Applies routine organic coatings for corrosion protection and appearance requirements. Works on articles of moderate complexity using established drawings and requirements.

OTHER
Onsite position only
20 positions
Aiming to start in batches (2-3) ASAP
These positions are available for 1st OR 2nd shift: (6:45am-3:30pm OR 3:30pm-12am) PLEASE LEAVE WHAT SHIFT YOUR CANDIDATE IS INTERESTED IN IN THE SUMMARY SECTION

REQUIREMENTS
Lift less than 25 pounds (Occasional lifting of 21-35 pounds), bend and twist at the waist, walk, crawl, crouch, stand for long periods, kneel, reach, climb/balance, flexion/extension
Contact with sealants and solvents, exposure to noise, working on elevated platforms
Use personal protective gear for face, eyes, ears, hand, and arms as required.
Pass visual acuity and color perception tests
Read, write, and comprehend the English language
Handle, use, and dispose of hazardous material
Obtain & maintain training certifications as required to support assignment responsibilities
Occasional (1 to 3 hrs) finger manipulation
On occasion, a 2-person lift may be necessary for weights greater than 50 lbs
Frequent reaching overhead (3 to 6 hrs)
Frequent walking on flat surfaces
Frequent standing flat or uneven surfaces
Frequent balancing on a ladder, steps, or uneven surfaces
Occasional climbing on 3-12 ft ladders or stands
Rotation of head/neck, sitting, crawling, squatting, bend/stoop, lying down, and operate foot controls
Occasional contact with metals
Exposure to plastics and solvents to atmospheric conditions
Frequent exposure to noise
Additional Skills:
Skills: Education/experience typically acquired through basic education (e.g. high school diploma/GED).

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a 401K offering. In some states and on some openings there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2644-2628-11534
Job Location: Salt Lake City UT
Per Diem: --
Overtime: --
Start Date: 2022-04-13
Input Date: 01/05/2022
Last Updated: 02/01/2023
Firm Name: STRUCTURES COMPANY LLC
Attention: Tania Martinez
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fabrication Specialist A

Description:

This is a very exciting opportunity to work with one of the world's largest aerospace companies!

The contracts are regularly extended and direct opportunities are often available.

JOB DESCRIPTION
Performs machine set-up, machining, sheet metal fabrication and extrusion, tube bending and fabrication tasks. Performs composite lay-up, fabrication and assembly tasks. Assembles precision mechanical and electro-mechanical components. Assembles, repairs, modifies and installs various power plants and drive trains. Perform soldering on electronic and avionics products. Assembles and installs wire harnesses and avionics products. Prepares test articles, fixtures and data collection devices to perform various tests. Performs basic organic chemical conversion and paint preparation. Applies routine organic coatings for corrosion protection and appearance requirements. Works on articles of moderate complexity using established drawings and requirements.

OTHER
Onsite position only
20 positions
Aiming to start in batches (2-3) ASAP
These positions are available for 1st OR 2nd shift: (6:45am-3:30pm OR 3:30pm-12am) PLEASE LEAVE WHAT SHIFT YOUR CANDIDATE IS INTERESTED IN IN THE SUMMARY SECTION

**Please note: candidates must be willing to work either 1st or 2nd shift. The placement will be determined by the team that they're assigned. While we'd like to accommodate everyone's preference, it's likely that most will end up on 2nd shift at some point. **
Additional Skills:
Skills: Education/experience typically acquired through basic education (e.g. high school diploma/GED).

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a 401K offering. In some states and on some openings there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2701-2685-11534
Job Location: Salt Lake City UT
Per Diem: --
Overtime: --
Start Date: 2022-03-16
Input Date: 01/14/2022
Last Updated: 09/27/2023
Firm Name: STRUCTURES COMPANY LLC
Attention: Tania Martinez
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fabrication Specialist A

Description:

This is a very exciting opportunity to work with one of the world's largest aerospace companies!

The contracts are regularly extended and direct opportunities are often available.

Special Project for MAF Program New Orleans

Due to special project, typical skill set is not required.

Job Description:
Performs machine set-up, machining, welding set-up, welding, sheet metal fabrication and extrusion, tube bending and fabrication tasks. Performs composite lay-up, fabrication and assembly tasks. Assembles precision mechanical and electro-mechanical components. Assembles, repairs, modifies and installs various power plants and drive trains. Perform soldering on electronic and avionics products. Assembles and installs wire harnesses and avionics products. Prepares test articles, fixtures and data collection devices to perform various tests. Performs basic organic chemical conversion and paint preparation. Applies routine organic coatings for corrosion protection and appearance requirements. Works on articles of moderate complexity using established drawings and requirements.

Project Top Five Skill Set FOD Monitoring Project
1) Customer Service Oriented / Approachable personality
2) Basic computer skills / Data entry
3) Organizational skills / Attention to detail / 5S
4) Can follow procedures and enforce compliance (Parts, Tools, Consumables, FOD, Safety, etc.)
5) Material handling / Supply re-stocking *Forklift experience preferred

Tank Monitor Position Responsibilities:
Performs FOD (foreign object debris) monitoring tasks in support of the SLS Program.
Performs walk downs of FOD Critical areas.
Monitors tool controls and provide coaching on tool and part procedures.
Monitors and logs on computer personnel entering or exiting FOD critical areas.
Logs in and out all shop consumables, small parts and tools.
Verifies proper tethering and stowage procedures are followed and performs FOD checks at the end of each shift.
Monitors oxygen levels for confined spaces while area has an active permit until closeout
Keeps consumables and PPE restocked
Performs 5S/area organization tasks as assigned
Additional support for factory optimization lean activities

Additional:
This position requires the ability to obtain access to a National Aeronautics and Space Administration (NASA) facility.
This is a NASA safety-sensitive position and is subject to random drug and alcohol testing.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at the listed location option.
This position is for 1st shift for training- then may shift to 2nd or 3rd shift. Variable shifts may be required subject to business needs. Contractors must be able work all shifts to meet business needs. Do submit candidates who are unable to work all shifts.


Work Environment: (edit for specific job)
Lift up to 25 pounds (Occasional lifting of 21-35 pounds), bend and twist at the waist, walk, crawl, crouch, stand for long periods, kneel, reach, climb/balance, flexion/extension
Contact with sealants and solvents, exposure to noise, working on elevated platforms
Use personal protective gear for face, eyes, ears, hand, and arms as required.
Pass visual acuity and color perception tests
Read, write, and comprehend the English language
Handle, use, and dispose of hazardous material
Obtain & maintain training certifications as required to support assignment responsibilities
Occasional (1 to 3 hrs.) finger manipulation
On occasion, a 2-person lift may be necessary for weights greater than 50 lbs.
Frequent reaching overhead (3 to 6 hrs.)
Frequent walking on flat surfaces
Frequent standing flat or uneven surfaces
Frequent balancing on a ladder, steps, or uneven surfaces
Occasional climbing on 3-12 ft. ladders or stands
Rotation of head/neck, sitting, crawling, squatting, bend/stoop, lying down, and operate foot controls
Occasional contact with metals
Exposure to plastics and solvents to atmospheric conditions
Frequent exposure to noise

Minimum Education Requirement: GED / HS Diploma

Schedule: Contractor must be able to work variable shifts - 1st, 2nd 3rd; Overtime is scheduled based on business needs and may include weekend hours
Additional Skills:
Skills: Education/experience typically acquired through basic education (e.g. high school diploma/GED).

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a 401K offering. In some states and on some openings there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2507-2493-11534
Job Location: New Orleans LA
Per Diem: --
Overtime: --
Start Date: 2022-01-25
Input Date: 12/30/2021
Last Updated: 09/27/2023
Firm Name: STRUCTURES COMPANY LLC
Attention: Tania Martinez
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fabrication Specialist A

Description:

This is a very exciting opportunity to work with one of the world's largest aerospace companies!

The contracts are regularly extended and direct opportunities are often available.

Performs machine set-up, machining, welding set-up, welding, sheet metal fabrication and extrusion, tube bending and fabrication tasks. Performs composite lay-up, fabrication and assembly tasks. Assembles precision mechanical and electro-mechanical components. Assembles, repairs, modifies and installs various power plants and drive trains. Perform soldering on electronic and avionics products. Assembles and installs wire harnesses and avionics products. Prepares test articles, fixtures and data collection devices to perform various tests. Performs basic organic chemical conversion and paint preparation. Applies routine organic coatings for corrosion protection and appearance requirements. Works on articles of moderate complexity using established drawings and requirements.

Perform FOD (foreign object debris) monitoring tasks in support of the SLS
Perform walk downs of the FOD area at the beginning of each shift
Monitor tool controls and provide coaching on tool and part procedures
Monitor personnel entering or exiting FOD critical areas
Log in/out shop consumables, small parts and tools, verify proper tethering and stowage procedures are followed and perform FOD checks at the end of each shift
Perform 5S/area organization tasks as assigned
Escort suppliers and visitors throughout the factory as needed

Qualifications
Required:
This position requires the ability to obtain badging for NASA facility access.
This is a sensitive/safety-sensitive position and is subject to NASA (DOT) random drug and alcohol testing.
This position requires everyone to wear steel toed shoes.
This position requires the individual to perform work in an operational complex while maintaining a safe manufacturing environment.

Individuals are required to train, understand, and observe extensive safety and process controls to help protect persons and equipment.
This position may support a 24/7 maintenance operation.
This position requires the ability to perform manual labor inside or outside throughout the year in a variety of extreme weather conditions.
The employee must meet medical requirement for work in geographic areas.
The employee must be able to ascend and descend vertical work ladders, work in confined spaces, and lift loads of
approximately 35 pounds.
Applicant may operate a forklift and mobile crane.
The work shift and baseline work schedule may frequently change to support mission requirements and may include weekends and holidays.

Mission requirements and/or workload may require both scheduled and unscheduled overtime.
Applicant must be available immediately
Additional Skills:

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a 401K offering. In some states and on some openings there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2317-2308-11534
Job Location: New Orleans LA
Per Diem: --
Overtime: --
Start Date: 2022-03-01
Input Date: 12/31/2021
Last Updated: 09/27/2023
Firm Name: STRUCTURES COMPANY LLC
Attention: Tania Martinez
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fabrication Specialist B

Description:

This is a very exciting opportunity to work with one of the world's largest aerospace companies!

The contracts are regularly extended and direct opportunities are often available.

Performs machine set-up, machining, welding set-up, welding, sheet metal fabrication and extrusion, tube bending and fabrication tasks. Performs composite lay-up, fabrication and assembly tasks. Assembles precision mechanical and electro-mechanical components. Assembles, repairs, modifies and installs various power plants and drive trains. Perform soldering on electronic and avionics products. Assembles and installs wire harnesses and avionics products. Prepares test articles, fixtures and data collection devices to perform various tests. Performs basic organic chemical conversion and paint preparation. Applies routine organic coatings for corrosion protection and appearance requirements. Works on articles of limited complexity following established drawings and requirements.

Three years experience required. Orbital Tube welding and Friction Stir welding preferred. Variable shifts may be required.
Additional Skills:

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a 401K offering. In some states and on some openings there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2177-2177-11534
Job Location: New Orleans LA
Per Diem: --
Overtime: --
Start Date: 2022-09-15
Input Date: 01/04/2022
Last Updated: 11/28/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Tania Martinez
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Facilities Project Admin 3

Description:

This is a very exciting opportunity to work with one of the world's largest aerospace companies!

The contracts are regularly extended and direct opportunities are often available.

Evaluates for major projects, contractor proposals for fair and reasonable cost. Administers contractor activities by participating in contractor selection, contract award, contract change negotiations, constructability reviews, and cost/schedule visibility, such as management, customer and contractor reviews to ensure compliance with standard operating procedures. Provides guidance to less experienced employees. Obtains facilities design and resources commitments for major projects. Develops work package that can include budget/funding source, schedule, drawings, specifications, statement of work, procurement, estimates. Coordinates with affected parties such as customer, designers, SHEA, crafts, Security, and network infrastructure to create an agreed to implementation plan. Assembles and releases work package by collecting and integrating various individual documents such as facilities work order, contract service request, drawings, vendor quotes, schedule, permits. Finalized work package will provide documents to implement the project. Provides guidance to less experienced employees. Evaluates requests and meet with customer to define requirements for major projects. Identifies acceptable options with customer to clarify needs and develop the preliminary scope of work in order to meet the customer's requirements. Creates layouts and conceptual designs. Ensures compliance and regulatory standards such as city, county, state, federal. Develops options so that facilities modifications are accomplished within project objectives. Works with affected parties to define functionality and constructability. Develops conceptual, budgetary, and detailed cost estimates to assist in the business case analysis. Negotiates options with customer to select the best solution for customer and company. Provides guidance to less experienced employees. On major projects, ensures completion and retention of project records by following the standard operating procedure for closure and update of appropriate documents, forms, permits, work management systems, commissioning and as-built drawings. Ensures comprehensive closeout and retention of project and contract files to provide an audit trail for Records Retention, Internal Audit, Internal Revenue Service, Property Accounting, Legal, and Facilities. Provides guidance to less experienced employees. On major projects, monitors and coordinate implementation activities such as relocations, construction, utility shutdowns, budget management, schedule, and project reviews. Coordinates support functions such as vendors, security, fire, SHEA, network infrastructure and verifies compliance with project documents. Ensures that project implementation meets established quality, cost, schedule targets and regulatory requirements. Provides guidance to less experienced employees. Receives customer requests for major facilities projects, such as construction, rearrangements, moves, and asset acquisition, via various electronic methods. Validates against acceptance criteria for new requests and acknowledges customer requests. Logs requests into work management system in order to document, track, and perform work.
Additional Skills:
-Business Process Improvement
-Continuous Improvement
-Enabling technology/Innovation & Invention
-Engineering Drawings & Specs
-Government Laws/Regulations
-Process Management Skills
-Project Cost Estimating
-Proj Sched & Resource Mgmt
Skills: Education/experience typically acquired through advanced education (e.g. Bachelor) and typically 6 or more years' related work experience or an equivalent combination of education and experience (e.g. Master+4 years' related work experience, 10 years' related work experience, etc.).

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a 401K offering. In some states and on some openings there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2512-2498-11534
Job Location: Everett WA
Per Diem: --
Overtime: --
Start Date: 2022-03-21
Input Date: 12/30/2021
Last Updated: 09/27/2023
Firm Name: STRUCTURES COMPANY LLC
Attention: Tania Martinez
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Control Embedded Software Engineer

Description:
Hello! My name is Don Shell & I am a recruiter with 804 Technology. We are currently seeking a Flight Control Embedded Software Engineer for a long term contract in Fort Worth, TX. The job description and requirements are listed below.

Bell/Textron is seeking an experienced self-motivated Embedded Controls Software Engineer. The embedded controls software role will integrate with technology and vehicle platform development teams with focus on the propulsion systems. The emerging concept vehicles provide opportunities for flight controls software engineering, simulation and test of configurations and technologies that will shape the future of aviation. This position will be part of a diverse team of engineers capable of executing in a challenging and fast-paced environment.

• Develop embedded DO-178 software for Flight Control System (FCS) with complex hardware.
• Perform formal software development through design for requirements and requirements verification with C/C++ code and MathWorks MATLAB & SIMULINK toolsets
• Develop and update requirements and verification traceability
• Conduct software integration and testing on target hardware
• Develop, implement, document, and review Low-Level Test (LLT) and High-Level Test (HLT) software cases and expected results
• Perform LLT and HLT execution on desktop environment and target electronic hardware integrated with real sensors and actuators in a lab environment
• Development and implementation of safety critical primary control software in both ‘bare metal’ main executives and real time operating systems environments.
• Design and implementation of real time embedded control functionality including in-line monitoring, redundancy management and start/periodic built-in test [S/PBIT].
• Design and test of Flight Control Systems (FCS) with embedded DO-178 software and DO-254 complex hardware, including Fly-By-Wire Flight Control Systems
• System and software design, requirements management, systems specifications, interface management, system safety assessment, verification and validation testing in desktop simulation environment and systems integration labs, aircraft flight test, and aircraft/system qualification and certification


Education Requirements
• Bachelor’s degree in Mechanical Engineering, Aerospace Engineering, Electrical Engineering, Computer Science Engineering required.
• Other technical degrees may be considered with relevant work experience.


Position Requirements
• Experience at all levels will be considered with a minimum of 5 years specific experience with embedded control software development. Preference will be given for additional work in sensor and actuator controls, avionics, or electrical systems integration, development, and testing.
• Familiarity with relevant standards, for example: RTCA DO-160, MIL-STD-810, RTCA DO-178, RTCA DO-254, SAE ARP4754A, SAE ARP4761, 14 CFR Part 27 and Part 29 for commercial and military qualification and certification of aircraft systems.
• Software version control
• Programming in C/C++
• Embedded environments
• HW initialization and synchronization,
• MathWorks MATLAB/Simulink Embedded coder considered a plus

804 Technology is an equal opportunity employer.

All qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, disability or national origin.

Don Shell
804 Technology
Technical Recruiter
C. 817-800-0935
dshell@804technology.com
www.804technology.com
 
Job Number: 12420946
Job Location: Fort Worth, TX
Rate: $40.00 to $75.00
Per Diem: Split
Overtime: Possible
Duration: 12 months
Start Date: ASAP
Input Date: 02/15/2022
Firm Name: 804 TECHNOLOGY
Attention: Don Shell
Address: 5381 HIGHWAY N STE 201
City, State: COTTLEVILLE, MO 63304
Phone: 636/928-0330
Fax Phone: 636/530-3693
Website: www.804technology.com

Gen Electro/Mech Assm Spec

Description:

This is a very exciting opportunity to work with one of the world's largest aerospace companies!

The contracts are regularly extended and direct opportunities are often available.

Performs complex production assembly operations and inspections on electronic/electrical and mechanical assemblies and subassemblies. Performs rework, repair and modification to parts and assemblies. Presents statistical data to team for analysis and problem resolution. Provides complex periodic maintenance on machines and tooling and complex machine set up tasks following machine inspection checklists. Coordinates with manager and other departments to coordinate work flow and resolve issues. Performs complex rework, repair and modification to parts and assemblies. Assembles and delivers kits. Performs simple receiving and inspections procedures on incoming materials. Documents inspection results in accordance with applicable procedures. Coordinates with management or other departments to establish work priorities. Updates work status documentation. Works under minimal supervision.

Our Space & Security (BDS) has an exciting opportunity for a Senior Electrical-Electronic Assembly Specialist to join our dynamic team in Germantown, MD.

Position Responsibilities:

Performs complex rework, repair and modification to parts and assemblies (e.g. soldering on electronic assemblies 90% of the time and mechanical assemblies 10% of the time).
Performs complex production assembly operations on electronic/electrical and mechanical assemblies and subassemblies.
Coordinates with supervisor and other departments to coordinate work flow and resolve issues.
Coordinates with supervisor to establish work priorities.
Works under minimal supervision.

This position is for 1st shift.

Required:
Must have 5+ yrs experience soldering components on PC board assemblies


Basic Qualifications (Required Skills/Experience):
Minimum of High School Diploma or GED.
More than 5 years of experience in electronics and electro-mechanical assemblies.
More than 5 years of experience in a manufacturing or assembly environment.
More than 5 years of experience performing soldering and electronics repair to the component level.
More than 5 years of experience utilizing and following detailed work instructions, reading and interpreting blueprints, drawings, or specifications.

Preferred Qualifications (Desired Skills/Experience):
Current IPC-7711/IPC-7721 certification for Rework and Repair of Electronic Assemblies.

Typical Education/Experience:

Education/experience typically acquired through basic education (e.g. High School diploma/GED) and typically 7 or more years' related work experience or an equivalent combination of education and experience (e.g. vocational school/Associate+5 years' related work, Bachelor+2 years' related work, etc.)

Relocation:

Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace: We are a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Competencies: Information Technology Fluency, General Shop Processes, Engineering Drawings & Specs, Assembly Tools, Assembly Process, Teamwork, Continuous Learning, Accountability and Responsibility, Continuous Improvement, Adaptability, Change Management, Certification & Qualification
Skills: Education/experience typically acquired through basic education (e.g. High School diploma/GED) and typically 7 or more years' related work experience or an equivalent combination of education and experience (e.g. vocational school/Associate+5 years' related work, Bachelor+2 years' related work, etc.).

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a 401K offering. In some states and on some openings there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2624-2608-11534
Job Location: Germantown MD
Per Diem: --
Overtime: --
Start Date: 2022-04-18
Input Date: 12/29/2021
Last Updated: 03/28/2024
Firm Name: STRUCTURES COMPANY LLC
Attention: Tania Martinez
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
HVAC Engineer

Description:
Responsibilities:
• Develop new and revise existing operational test procedures and maintenance documentation associated with the launch vehicle ECS and facility HVAC systems to meet customer requirements.
• Serve as engineer responsible for disposition of corrective actions and coordination with cross-functional groups to identify/implement solutions. This will include management of facility projects to ensure effective and timely technical integration and implementation.
• Candidate will ensure all projects are managed per implementation schedules and within established engineering budgets. Will prepare working schematics, detailed drawings and contract Statements of Work. Candidate will perform field walk-downs and review and revise electronic CAD files to produce accurate design and as-built drawings of launch facilities and support equipment.
• The candidate will conduct feasibility studies, determine engineering criteria or Client and cost estimates for projects or tasks, or perform analyses to develop design/redesign options, improvements, or recommendations for systems and components. Actively supports system operation, trouble shooting and maintenance. Provides innovative solutions to complex engineering problems.
• Perform engineering thermodynamic, heat transfer and fluid/gas dynamic calculations.
• Conduct multidisciplinary research; collaborate with equipment designers and/or hardware engineers in the planning, design, development, and utilization of automated control systems.

Experience:
• Bachelor of Science from an accredited college in Mechanical Engineering or equivalent experience, with a minimum of 7 years of professional experience.
• The successful candidate should have experience constructing, modifying and/or operating facility ECS/HVAC systems for space launch facilities and/or heavy industrial facilities. Experience with industrial process heating, refrigeration and air-conditioning systems and equipment is essential.
• This position requires competent knowledge of facility ECS/HVAC systems, mechanical engineering design, CAD practices as well as a sound practical (hands-on) knowledge of engineering principles, practices, and industry standards.

Discretion/Latitude:
• The successful candidate should be self-motivated and able to work productively without constant direct supervision.
• Candidate will be given latitude to determine technical objectives and define the most efficient approaches to completing assignments.
• Work is guided by long-term organizational objectives. Assignments can be self-initiated.
• Determines and pursues courses of action necessary to obtain desired results.
• Work is checked through consultation and agreement with others as well as through supervisory review.
• Develops solutions to complex engineering/scientific problems that require the regular use of ingenuity and creativity and modification of standard techniques and analytical methods.
• Viewed as an expert in the field within the organization. Possibly an emerging authority in the company. Guides the successful completion of major programs and projects; may function in a project leadership role.
• May be a CRE for complex components. Poor decisions or recommendations would typically result in failure to achieve major organizational/program objectives.
• Work is performed independently. Exercises considerable latitude in determining the technical objective of the assignment.
• Completed work is reviewed from a relatively long-term perspective for desired results. Provides mentorship to others to further their discipline or the company.
 
Job Location: Vandenberg, CA
Rate: Hourly Rate
Per Diem: No
Overtime: No
Input Date: 01/12/2022
Last Updated: 01/17/2022
Firm Name: AGREEYA SOLUTIONS
Attention: Utkarsh Singh
Address: 605 COOLIDGE DR STE 200
City, State: FOLSOM, CA 95610
Phone: 916/351-2545
Website: www.agreeya.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Integration Engineer

Description:
An Integration Engineer 2 role located in Kirkland, WA is currently available through Belcan. The Integration Engineer 2 will support development and test of aircraft electrical power generation, conversion, and distribution equipment, and qualification testing of development programs such as starter generators and electronic circuit breakers.

Integration Engineer 2 duties:

* Develop and perform circuit card level and unit level testing to ensure a successful product
delivery to customer's aircraft.
* Develop and document test equipment to support lab testing.
* Provide technical assistance to senior staff in support of current programs.
* Prepare and review custom test equipment drawings and designs, using electrical and
mechanical hardware and software, with guidance from other engineers, to enable test of
aircraft electrical power equipment.
* Analyze and solve a variety of technical problems through use of test data and specification
requirements. Organize and analyze data and document results. Review results to ensure their
accuracy and appropriateness.
* Prepare and present technical information of limited scope for internal engineers, program
personnel, and other internal customers.
* Acts as an individual contributor, building stable working relationships internally through tasks
and assignments.
* Guide internal technicians as required in performing system integration and development tests
and custom test equipment build.

EDUCATION AND EXPERIENCE REQUIRED:

* Electrical engineering background with a BSEE degree.
* 2 plus years of experience
* Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder), or
lawfully admitted into the U.S. as a refugee or granted asylum.

If you are interested in this Integration Engineer 2 role located in Kirkland, WA please apply via the 'apply now' link provided.

Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.


 
Job Number: 315149
Job Location: Kirkland, WA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/12/2021
Last Updated: 03/03/2022
Firm Name: BELCAN TECHSERVICES
Attention: ScottWatkins
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Interior Design Engineer

Description:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

Education and Experience Requirements
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Unique Skills:
• Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
• Other responsibilities will include the installation of Avionics/Electronic components such as Exterior Antennas, Avionics LRUs and Aircraft structure modifications necessary for the installation of components.
• Design engineer will employ design standards consistent with company standards, accepted design methods are executed under the direction of the Mechanical Engineering Lead.
• Additional responsibilities are out lined in the job description and as assigned by the Mechanical Engineering Lead.
• Creation of monuments in Catia V5, must be familiar with FAA design standards. Must work with little supervision and be a willing team member that will perform work accurately combining sound experience with a common-sense approach.
• The qualified individual will adhere to aggressive schedules and budget requirements.

Duties and Responsibilities:
• Selecting appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guidelines for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedules.
• Work without appreciable direction; work is reviewed from a long-range perspective for desired results
• Proficient in CATIA V5-SmarTeam/Enovia.
• Office Products such as Power Point, Project, Word and Excel
• CHS/EWIS/EHI Methodology
• AutoCAD Knowledge is a plus.

Essential Functions:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues .
• Is consulted extensively by associates and others as a recognized authority within the field .
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities .
• Approach to problem solving balances technical product, cost and schedule .
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results .
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative .

Additional Functions:
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
• Perform other duties as assigned.

Other Requirements:
• Advanced degree in engineering, or related curriculum preferred
• The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 24-641
Job Location: Dallas, TX
Rate: $68-$75/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 12/08/2021
Last Updated: 05/12/2022
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon Ferguson
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

Jr. Electrical Engineer - Powertrain

Description:

Working with the Senior EE to design and deploy High voltage power systems with an emphasis on building and demonstrating prototypes. You'll design and test generator and power distribution prototype systems using primarily off the shelf components. Preferably lots of hands-on integration experience paired with the latest in design and simulation.

    Technical Knowledge of High Torque and Speed Electric Motor & Actuation Systems Produce Quality Documentation to Communicate across the Engineering Team Effectively Architect Power Distribution and Balancing Across Systems.
Equitty Stake being offered

Preferred Skills:

    Dassault Systems 3DS Microsoft Office MATLAB Electric Motor Design Electronic Speed Controller Design Python/C+

Ideal Attributes:

    Humble Communicator Self-Directed Passionate About Orb's Vision Organized (Practice 5S) Wide Knowledge Base Across Disciplines

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2478-2464-11534
Job Location: Lowell MI
Per Diem: --
Overtime: --
Start Date: 2022-02-07
Input Date: 12/03/2021
Last Updated: 03/28/2024
Firm Name: STRUCTURES COMPANY LLC
Attention: JR Gonsalves
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Calibration Laboratory Manager

Description:
A Calibration Laboratory Manager job in Grand Prairie, TX is currently available through Belcan with one of our Calibration clients. You will be responsible for supervising multiple staff members in the calibration of metrology which includes Electronic Calibration, Dimensional Calibration and Accredited Calibration. During planning, organizing, and conducting projects you will be involved with daily, weekly and monthly scheduling of laboratory work assignments. To be considered for this role, a Bachelor's Degree is preferred and at least 5 years' of relevant experience. This is a great opportunity with a growing company.

Calibration Laboratory Manager Job duties:

* Daily, weekly and monthly scheduling of laboratory work assignments
* Communicating & coordinating to ensure a high level of customer satisfaction
* Managing laboratory standards
* Working with & coordinating with internal resources
* Insuring adherence to standard laboratory practices
* Training and goal planning for direct reports
* Enforcement of all quality standards and guidelines
* Resolve metrology related problems with the technical team members
* Collect, process and review calibration data
* Implement the proper use of systems and database

Qualifications:

* Bachelor's Degree and at least 5+ years' experience in at least one of the following technical fields: Electronic Calibration, Dimensional Calibration, Avionics overhaul or repair, Aircraft maintenance, RF Electronics, Electronic Engineering, A&P, Mechanical Engineering, Military Experience, PMEL or a related technical field.
* Monitor and manage the production and performance of the lab personnel
* Provide weekly and monthly reports for overtime, turnaround time averages, and other reports requested
* Support periodic audits, review and evaluate warranties
* Train and mentor technicians
* Understand and Follow Standard Laboratory Practices
* Executing Continuous improvement of the lab
* Managing calibration of lab standards
* Assist QA and technical teams
* Conduct performance reviews

If you are interested in this Calibration Laboratory Manager job in Grand Prairie, TX, please apply via the 'apply now' link provided. Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.
 
Job Number: 319442
Job Location: Grand Prairie, TX
Rate: --
Per Diem: --
Overtime: --
Duration: JOB-CONTRACT_TYPE
Start Date: --
Input Date: 01/11/2022
Last Updated: 02/15/2022
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

Lead, Electrical Engineer - ROIC Design

Description:
Description:

Lead, Electrical Engineer ROIC Design

We are looking for someone who has experience in designing custom readout integrated circuits (ROICs) in state of the art image sensors. As ROIC Designer, you will help specify and design analog and digital integrated circuit designs for readout ICs.

Essential Functions:

The ROIC Designer will serve as technical expert and point of contact representing ROIC expertise across multiple integrated program teams. In this capacity, responsibilities will include capturing requirements in formal documentation, interfacing with sub-contract design vendors, and contributing to design reviews. You will provide technical input to the ROIC design team while directly contributing to the design effort.

As a key member on a growing team, you will be involved in all aspects of design including block-level design and simulation, chip-level architecture and verification, layout and physical verification, and silicon validation and characterization. The ideal candidate will have ROIC-specific design experience and a demonstrated willingness to mentor other engineers.

Qualifications:

    Bachelor's Degree and a minimum of nine (9) years of prior relevant experience. Graduate Degree and a minimum of 7 years of prior related experience. An equivalent combination of education and experience may also be considered. Position requires the ability to obtain and maintain a DoD Security Clearance, which requires U.S. Citizenship. Requires mastery level knowledge within a specific technical area or multiple job areas typically obtained through advanced education combined with experience. Viewed as an expert and/or resource within the field by peers in and outside the organization. Proven ability to understand system-level performance requirement and reduce to ROIC chip-level requirements. Experience designing two or more of: High speed differential I/O, A-to-D converters, bias generation, analog buffers, serializers, readout pixel unit cells. Custom layout of Analog and Digital ICs from the block level to the top level. Cadence Virtuoso and Mentor Calibre verification software. Integrated circuit and electronics test and debug. Knowledge of common image artifacts and contributing factors. Knowledge of non-uniformity sources and correction methods, 3-D noise analysis. Familiarity with camera electronics and software. Documentation, communication and analysis skills.

Preferred Additional Skills:

    Experience with large, stitched-die designs

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2531-2515-11534
Job Location: Plano TX
Per Diem: --
Overtime: --
Start Date: 2022-02-07
Input Date: 12/09/2021
Last Updated: 03/28/2024
Firm Name: STRUCTURES COMPANY LLC
Attention: JR Gonsalves
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MEMS Engineering Manager

Description:
A Principle MEMS Manager role located in Redmond, WA is currently available through Belcan. The Principle MEMS Manager will lead the MEMS team in all development, design, and production activities. A working knowledge of electro-magnetic, piezo-electric, and electrostatic actuation methods as well as MEMS material properties, fabrication and assembly processes is required.

Principle MEMS Manager duties:

* Own planning, scheduling, and execution of all MEMS team's activities to ensure program
milestones are achieved
* Responsible for managing and directing staff in support of all initiatives including providing
training, guidance, and mentorship
* Lead definition and validation of MEMS device requirements to meet program objectives
* Drive detailed design and analysis of electro-magnetic, piezo-electric, and electrostatic drive
MEMS devices used for sensing applications
* Collaborate cross functionally to integrate MEMS with higher level optomechanical systems and
electronic control systems
* Deliver qualification / verification test plans and results to ensure devices meets all functional,
control and reliability requirements
* Own and execute MEMS technology roadmap with responsibility for assessing competitive
approaches, vetting new technology, exploring system architecture concepts, and proposing
strategic investments and partnerships
* Drive characterization testing, data analysis, and failure analysis of prototype and pre-production
units

EDUCATION AND EXPERIENCE REQUIRED
* Master of Science in electrical engineering, mechanical engineering, material science or a related
technical field strongly preferred
* A Bachelor of Science in technical discipline and equivalent combination of education and work
experience will be considered
* Minimum 15+ years in technical field and 5+ years focused on management / leadership
* Demonstrated track record of success in the leadership and management of automotive or
consumer product engineering team
* Sound organizational skills including ability to prioritize and deploy departmental resources to
meet defined project timelines
* Experience with MEMS and electronic design and packaging related to opto-mechanical systems
* Broad technical understanding across multiple disciplines including mechanical and optical
systems, hardware, software, controls, and reliability engineering
* Familiar with modeling and analysis of electro-magnetic, piezo-electric, and / or electrostatic
behaviors related to MEMS actuation
* Demonstrated experience in volume manufacturing of hardware and software product working
with customers, contract manufacturers and suppliers
* Experience with design for manufacturability and new product development
* Semiconductor manufacturing background
* Hands on experience and willingness to learn new technologies
* SPC and Six Sigma certification or training or equivalent (preferred)

If you are interested in this Principle MEMS Manager role located in Redmond, WA please apply via the 'apply now' link provided.

Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.


 
Job Number: 319501
Job Location: Redmond, WA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 01/12/2022
Last Updated: 05/17/2022
Firm Name: BELCAN TECHSERVICES
Attention: DerrickHart
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MP&P Technical Analyst 3 - Electrical

Description:

Very exciting opportunity to work with one of the world's largest aerospace companies!

The contracts are regularly extended and direct opportunities are often available.

Description:

Evaluates parts, materials, processes, technology or equipment through research and testing to ensure safety, reliability and adherence to requirements and specifications. Analyzes failed parts and processes to reduce or eliminate future failures. Generates test plans, identifies and categorizes failures, determines root cause and documents results and recommendations. Proposes, develops and validates revisions to procedures and specifications. Determines suitability of parts, materials and processes. Determines suitability of parts, materials and processes and coordinates resolution of issues with suppliers and customers. Supports continuous improvement of products and processes by designing, developing, fabricating, testing, evaluating and implementing new concepts and technology. Provides knowledge and technical consultation to internal and external customers. Works under general direction.

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a robust 401K offering. In some cases there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2191-2191-11534
Job Location: Tukwila WA
Per Diem: --
Overtime: --
Start Date: 2022-02-01
Input Date: 12/10/2021
Last Updated: 09/27/2023
Firm Name: STRUCTURES COMPANY LLC
Attention: Kimra Stone
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer 3

Description:
Manufacturing Engineer 3

Location: San Antonio, TX
Duration: 8 months

Job Description:
Develops and implements production and tooling methodologies. Participates on Integrated Product Teams (IPTs) to integrate technical solutions across multiple disciplines. Develops, identifies and implements conceptual designs and maintains the program architecture for build. Leads and implements manufacturing plans. Conducts producibility and variation analyses to ensure that manufacturing process capability matches requirements. Assists in providing producibility information for inclusion in project plans and helps document producibility best practices. Analyzes design/build concepts to evaluate producible design/build definitions. Resolves technical problems of significant impact to performance, cost or schedule. Coordinates and implements new engineering principles, theories, advanced technologies and concepts. Validates and ensures production readiness of solutions to complex problems. Implements lean principles and technologies.

Develop and implement electrical build and testing manufacturing plans and strategies. Conduct producibility and variation analyses to ensure that manufacturing process capability matches requirements. Analyze design/build concepts to evaluate producible design/build definitions. Review Wire Harness Assembly (WHA) engineering design, ensuring producibility of designs and configuration management control (i.e. engineering changes). Knowledge, application, experience/use of the client WIRS system is desired (familiarity of resident reports a plus). Experience with all aspects of Wire Harness Assembly change management / processing / implementation a plus.

Experience with Wiring component standards/sourcing/supply base a plus.
Resolve technical problems of significant impact to performance, cost or schedule. Validate and ensure production readiness of solutions to complex problems using lean principles and technologies.

Perform producibility reviews of Electrical Production Illustration drawings (Wiring Installation Drawings), and Electrical Provisions (support bracketry - details/Assemblies/Installations), ensuring design for manufacturability standards are supported and represented. Support integration activities associated with suppliers, process development and/or enhancements, procurement kitting, and data/technology analysis to meet manufacturing and deliverable requirements.

Experience / Familiarity with all aspects of Wire Harness installation, Pre-Installation and Post-Installation Wire Harness Assembly Testing (Fully terminated Wire Harnesses, and Termination performed on aircraft), and the ability to develop wiring tooling requirements based on manufacturing and engineering requirements. Experience / familiarity with different aspects of Wire Harness testing desired.
Wire Harness / System Troubleshooting experience a plus
Knowledge and use of the Client Integration Visibility Tool (IVT) a plus
Knowledge / Use of wiring testing systems a plus
Knowledge of Microsoft Office tools a must; focus being on advanced excel data analytical skills.
Knowledge of Jira Software, a plus.
Ability to work under minimal direction.

Education / Experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

Skill Code: 66T-Electrical/Electronics
 
Job Number: 21-33885
Job Location: San Antonio, TX
Per Diem: split
Overtime: possible
Duration: 8 months
Start Date: 1/7/2021
Input Date: 12/29/2021
Last Updated: 01/19/2022
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 859 STEPHENSON HWY
City, State: TROY, MI 48083
Phone: 843/955-9221
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer I - 2nd Shift

Description:
Do you want to work for an Aerospace company creating the latest technology for space exploration? Do you enjoy collaborating with others to create innovative products and services?
    In this role, you will work in multidisciplinary teams to bring concept of operations to fruition to further our customers' mission objectives. You will work both independently and as part of a team. Join us! As a manufacturing engineer, you will research, design, develop, test, certify, deploy and improve cutting edge products and services. These cover a very wide range from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. You'll consult with program management, design engineers, quality, and production teams in order to develop the most efficient and cost effective means of producing our products at the highest level of quality possible. Your technical duties involve reviewing engineering designs for producibility and the development of tooling and fixtures, work instructions, production process and procedures. You will be involved in the application of manufacturing technologies and industry best practices during the design and development of new products and processes throughout the product lifecycle.

Must-haves:

    Bachelor's of Science degree in related engineering discipline and typically 0-2 years of relevant experience

    Basic understanding of Computer Aided Engineering tools

    Conceptual knowledge of engineering principles and practices

    Familiarity working in multi-disciplinary teams

Preferred:

    Familiarity in applying and interpreting Geometric Dimensioning and Tolerancing (GD&T) per ASME Y14.5

    Background in the Aerospace and Defense Industry

    Knowledge of industry standard design principles, to include, but not limited to parametric design, model-based definition, material hardware selection, manufacturing and production processes

    Familiarity with work instruction/traveler development

    Participation in dispositions of Non-Conformance generation through a Material Review Board (MRB)

    Experience with new product introduction and transition to production

    Exposure to Product Lifecycle Management (PLM), Manufacturing Execution System (MES), and Manufacturing Resource Planning (MRP) systems

IMPORTANT NOTICE:

To conform to U.S. Government international trade regulations, applicant must be a U.S. Citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State or U.S. Department of Commerce.

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2575-2559-11534
Job Location: Louisville CO
Per Diem: --
Overtime: --
Start Date: 2022-03-28
Input Date: 12/16/2021
Last Updated: 11/28/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Corey Halliday
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II - 2nd Shift (Contract)

Description:

Do you enjoy collaborating with others to create innovative products and services? You will work in multidisciplinary teams to bring concept of operations to fruition to further our customers' mission objectives. You will work both independently and as part of a team. Join us!

    As a manufacturing engineer, you will research, design, develop, test, certify, deploy and improve cutting edge products and services. These cover a very wide range from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. You'll consult with program management, design engineers, quality, and production teams in order to develop the most efficient and cost effective means of producing our products at the highest level of quality possible. Your technical duties involve reviewing engineering designs for producibility and the development of tooling and fixtures, work instructions, production process and procedures. You will be involved in the application of manufacturing technologies and industry best practices during the design and development of new products and processes throughout the product lifecycle.

Must-haves:

    Bachelor's of Science degree in related discipline and typically 3 or more years of relevant experience

    Experience with Computer Aided Engineering tools

    Practical knowledge of engineering principles and practices

    Capability working in multi-disciplinary teams

Preferred:

    Familiarity in applying and interpreting Geometric Dimensioning and Tolerancing (GD&T) per ASME Y14.5

    Background in adhesive or bonding technologies

    Experience with vacuum bagging applications

    Experience with 3d printing

    Background in the Aerospace and Defense Industry

    Experience with work instruction/traveler development

    Participation in dispositions of Non-Conformance generation through a Material Review Board (MRB)

    Experience with new product introduction and transition to production

    Exposure to Product Lifecycle Management (PLM), Manufacturing Execution System (MES), and Manufacturing Resource Planning (MRP) systems

IMPORTANT NOTICE:

To conform to U.S. Government international trade regulations, applicant must be a U.S. Citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State or U.S. Department of Commerce.

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2433-2421-11534
Job Location: Louisville CO
Per Diem: --
Overtime: --
Start Date: 2022-01-26
Input Date: 11/25/2021
Last Updated: 11/28/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Corey Halliday
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II - 2nd shift (Contract)

Description:
Do you enjoy collaborating with others to create innovative products and services? You will work in multidisciplinary teams to bring concept of operations to fruition to further our customers' mission objectives. You will work both independently and as part of a team. Join us!
    As a manufacturing engineer, you will research, design, develop, test, certify, deploy and improve cutting edge products and services. These cover a very wide range from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. You'll consult with program management, design engineers, quality, and production teams in order to develop the most efficient and cost effective means of producing our products at the highest level of quality possible. Your technical duties involve reviewing engineering designs for producibility and the development of tooling and fixtures, work instructions, production process and procedures. You will be involved in the application of manufacturing technologies and industry best practices during the design and development of new products and processes throughout the product lifecycle.

Must-haves:

    Bachelor's of Science degree in related discipline and typically 3 or more years of relevant experience

    Experience with Computer Aided Engineering tools

    Practical knowledge of engineering principles and practices

    Capability working in multi-disciplinary teams

Preferred:

    Familiarity in applying and interpreting Geometric Dimensioning and Tolerancing (GD&T) per ASME Y14.5

    Background in adhesive or bonding technologies

    Experience with vacuum bagging applications

    Experience with 3d printing

    Background in the Aerospace and Defense Industry

    Experience with work instruction/traveler development

    Participation in dispositions of Non-Conformance generation through a Material Review Board (MRB)

    Experience with new product introduction and transition to production

    Exposure to Product Lifecycle Management (PLM), Manufacturing Execution System (MES), and Manufacturing Resource Planning (MRP) systems

IMPORTANT NOTICE:

To conform to U.S. Government international trade regulations, applicant must be a U.S. Citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State or U.S. Department of Commerce.

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2435-2423-11534
Job Location: Louisville CO
Per Diem: --
Overtime: --
Start Date: 2022-01-26
Input Date: 11/25/2021
Last Updated: 11/28/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Corey Halliday
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer III

Description:
Do you enjoy collaborating with others to create innovative products and services as a Manufacturing Engineer?
    You will work in multidisciplinary teams to bring concept of operations to fruition to further our customers' mission objectives. You will work both independently and as part of a team. Join us! As a manufacturing engineer, you will research, design, develop, test, certify, deploy and improve cutting edge products and services. These cover a very wide range from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. You'll consult with program management, design engineers, quality, and production teams in order to develop the most efficient and cost effective means of producing our products at the highest level of quality possible. Your technical duties involve reviewing engineering designs for producibility and the development of tooling and fixtures, work instructions, production process and procedures. You will be involved in the application of manufacturing technologies and industry best practices during the design and development of new products and processes throughout the product lifecycle.

Must-haves:

    Bachelor's of Science degree in related discipline and typically 6 or more years of relevant experience

    Experience with Computer Aided Engineering tools

    Practical knowledge of engineering principles and practices

    Capability working in multi-disciplinary teams

Preferred:

    Familiarity in applying and interpreting Geometric Dimensioning and Tolerancing (GD&T) per ASME Y14.5

    Background in the Aerospace and Defense Industry

    Knowledge of industry standard design principles, to include, but not limited to parametric design, model-based definition, material hardware selection, manufacturing and production processes

    Experience with work instruction/traveler development

    Participation in dispositions of Non-Conformance generation through a Material Review Board (MRB)

    Experience with new product introduction and transition to production

    Exposure to Product Lifecycle Management (PLM), Manufacturing Execution System (MES), and Manufacturing Resource Planning (MRP) systems

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2572-2556-11534
Job Location: Louisville CO
Per Diem: --
Overtime: --
Start Date: 2022-01-26
Input Date: 12/17/2021
Last Updated: 11/28/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Corey Halliday
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer III - 2nd Shift

Description:
Do you want to work for an Aerospace company creating the latest technology for space exploration? Do you enjoy collaborating with others to create innovative products and services?
    You will work in multidisciplinary teams to bring concept of operations to fruition to further our customers' mission objectives. You will work both independently and as part of a team. Join us! As a manufacturing engineer, you will research, design, develop, test, certify, deploy and improve cutting edge products and services. These cover a very wide range from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. You'll consult with program management, design engineers, quality, and production teams in order to develop the most efficient and cost effective means of producing our products at the highest level of quality possible. Your technical duties involve reviewing engineering designs for producibility and the development of tooling and fixtures, work instructions, production process and procedures. You will be involved in the application of manufacturing technologies and industry best practices during the design and development of new products and processes throughout the product lifecycle.

Must-haves:

    Bachelor's of Science degree in related discipline and typically 6 or more years of relevant experience

    Experience with Computer Aided Engineering tools

    Practical knowledge of engineering principles and practices

    Capability working in multi-disciplinary teams

Preferred:

    Familiarity in applying and interpreting Geometric Dimensioning and Tolerancing (GD&T) per ASME Y14.5

    Background in the Aerospace and Defense Industry

    Knowledge of industry standard design principles, to include, but not limited to parametric design, model-based definition, material hardware selection, manufacturing and production processes

    Experience with work instruction/traveler development

    Participation in dispositions of Non-Conformance generation through a Material Review Board (MRB)

    Experience with new product introduction and transition to production

    Exposure to Product Lifecycle Management (PLM), Manufacturing Execution System (MES), and Manufacturing Resource Planning (MRP) systems

IMPORTANT NOTICE:

To conform to U.S. Government international trade regulations, applicant must be a U.S. Citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State or U.S. Department of Commerce.

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2577-2561-11534
Job Location: Louisville CO
Per Diem: --
Overtime: --
Start Date: 2022-02-22
Input Date: 12/16/2021
Last Updated: 09/27/2023
Firm Name: STRUCTURES COMPANY LLC
Attention: Corey Halliday
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer Sr (Laser Tracker Toolmaker) (Contract)

Description:
Do you enjoy collaborating with others to create innovative products and services?
    You will work in multidisciplinary teams to bring concept of operations to fruition to further our customers' mission objectives. You will work both independently and as part of a team. Join us! As a Laser tracker Toolmaker, you will be responsible for leading the production of tools and specialized parts and devices used in the production of spaceflight hardware at. Support with be provided to cover a very wide range of products from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. You'll consult with program management, design engineers, quality, and production teams in order to develop the most efficient and cost effective means of producing our products at the highest level of quality possible. The work requires practical skill and knowledge as a Toolmaker to analyze specifications, lay out stock, set up and operate machine tools, and fit and assemble parts to make and repair tools, jigs, fixtures, gauges and hand tools. The work may require interpreting specifications, blueprints, manufacturers' manuals, sketches or similar documents. The candidate must have the ability to plan the sequence of operation and materials required according to knowledge of computer technology, such as computer aided design, CAD, or computer aided manufacturing, CAM, to design and create instructions for the manufacture tools. The candidate will be required to test and inspect the tools that are created to ensure that they are true to the original design and function properly. The candidate must have excellent communication skills and the ability to problem solve. Candidate must be able to perform incidental tasks as required to complete the larger task.

Must-haves:

    Basic knowledge of mathematics, algebra and physics

    A minimum of 8 years of combined experience and training similar to that required in a bona fide apprenticeship program as a Tool Maker or Tool and Die Maker; OR eight (8) years of documented Tool Maker or Tool and Die Maker experience; OR five (5) years of documented Tool Maker or Tool and Die Maker experience and three (3) years in a related trade

    6 year of experience in operating a laser tracker (Faro, Leica, API or equivalent)

    Experience with Computer Aided Engineering tools

    Knowledge of engineering principles and practices

    Familiarity working in multi-disciplinary teams

Preferred:

    Familiarity in applying and interpreting Geometric Dimensioning and Tolerancing (GD&T) per ASME Y14.5

    Background in the Aerospace and Defense Industry

    Knowledge industry standard design principles, to include, but not limited to parametric design, model-based definition, material hardware selection, manufacturing and production processes

    Exposure to Product Lifecycle Management (PLM), Manufacturing Execution System (MES), and Manufacturing Resource Planning (MRP) systems

    Ability to:

      Work any shift and work overtime, including daily, weekends and holidays as required

      Work from blueprints, drawings, layouts or other specifications to plan sequences of operations for fabricating tools or assemblies

      Verify dimensions, alignments and clearances of finished parts for conformance to specifications, using measuring instruments such as calipers, gauge blocks, micrometers and dial indicators

      Visualize and compute dimensions, sizes, shapes and tolerances of assemblies, based upon specifications

      Set up and operate conventional or computer numerically controlled machine tools such as lathes, milling machines and grinders to cut, bore, grind or otherwise shape parts to prescribed dimensions and finishes

      File, grind, shim and adjust different parts to properly fit them together

      Fit and assemble parts to make, repair or modify jigs, gauges and tools using machine tools and hand tools

      Perform tests with completed tools to ensure that parts meet specifications; make adjustments as necessary

      Lift, position and secure machine parts on surface plates or worktables, using hoists, vises, v-blocks or angle plates

      Measure, mark and scribe metal or plastic stock to lay out machining, using instruments such as protractors, micrometers, scribes and rulers

      Cut, shape and trim blanks or blocks to specified lengths or shapes, using power saws, power shears, rulers and hand tools

      Design jigs, fixtures and templates for use as work aids in the fabrication of parts or products

      Set up and operate drill presses to drill and tap holes in parts for assembly

IMPORTANT NOTICE:

To conform to U.S. Government international trade regulations, applicant must be a U.S. Citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State or U.S. Department of Commerce.

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2594-2578-11534
Job Location: Louisville CO
Per Diem: --
Overtime: --
Start Date: 2022-02-23
Input Date: 12/18/2021
Last Updated: 11/28/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Corey Halliday
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer Sr (Toolmaker-Jigs & Fixtures) (Contract)

Description:
Do you enjoy collaborating with others to create innovative products and services?
    You will work in multidisciplinary teams to bring concept of operations to fruition to further our customers' mission objectives. You will work both independently and as part of a team. Join us! As a Toolmaker, you will be responsible for producing tools and specialized parts and devices used in the production of spaceflight hardware. Support with be provided to cover a very wide range of products from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. You'll consult with program management, design engineers, quality, and production teams in order to develop the most efficient and cost effective means of producing our products at the highest level of quality possible. The work requires practical skill and knowledge as a Toolmaker to analyze specifications, lay out stock, set up and operate machine tools, and fit and assemble parts to make and repair tools, jigs, fixtures, gauges and hand tools. The work may require interpreting specifications, blueprints, manufacturers' manuals, sketches or similar documents. The candidate must have the ability to plan the sequence of operation and materials required according to knowledge of computer technology, such as computer aided design, CAD, or computer aided manufacturing, CAM, to design and create instructions for the manufacture tools. The candidate will be required to test and inspect the tools that are created to ensure that they are true to the original design and function properly. The candidate must have excellent communication skills and the ability to problem solve. Candidate must be able to perform incidental tasks as required to complete the larger task.

Must-haves:

    Bachelor's of Science degree in related discipline and typically 10 or more years of relevant experience

    Basic knowledge of mathematics, algebra and physics

    A minimum of 8 years of combined experience and training similar to that required in a bona fide apprenticeship program as a Tool Maker or Tool and Die Maker; OR eight (8) years of documented Tool Maker or Tool and Die Maker experience; OR five (5) years of documented Tool Maker or Tool and Die Maker experience and three (3) years in a related trade

    Experience with Computer Aided Engineering tools

    Knowledge of engineering principles and practices

    Familiarity working in multi-disciplinary teams

Preferred:

    Familiarity in applying and interpreting Geometric Dimensioning and Tolerancing (GD&T) per ASME Y14.5

    Background in the Aerospace and Defense Industry

    Knowledge industry standard design principles, to include, but not limited to parametric design, model-based definition, material hardware selection, manufacturing and production processes

    Exposure to Product Lifecycle Management (PLM), Manufacturing Execution System (MES), and Manufacturing Resource Planning (MRP) systems

    Ability to:

      Work any shift and work overtime, including daily, weekends and holidays as required

      Work from blueprints, drawings, layouts or other specifications to plan sequences of operations for fabricating tools or assemblies

      Verify dimensions, alignments and clearances of finished parts for conformance to specifications, using measuring instruments such as calipers, gauge blocks, micrometers and dial indicators

      Visualize and compute dimensions, sizes, shapes and tolerances of assemblies, based upon specifications

      Set up and operate conventional or computer numerically controlled machine tools such as lathes, milling machines and grinders to cut, bore, grind or otherwise shape parts to prescribed dimensions and finishes

      File, grind, shim and adjust different parts to properly fit them together

      Fit and assemble parts to make, repair or modify jigs, gauges and tools using machine tools and hand tools

      Perform tests with completed tools to ensure that parts meet specifications; make adjustments as necessary

      Lift, position and secure machine parts on surface plates or worktables, using hoists, vises, v-blocks or angle plates

      Measure, mark and scribe metal or plastic stock to lay out machining, using instruments such as protractors, micrometers, scribes and rulers

      Cut, shape and trim blanks or blocks to specified lengths or shapes, using power saws, power shears, rulers and hand tools

      Design jigs, fixtures and templates for use as work aids in the fabrication of parts or products

      Set up and operate drill presses to drill and tap holes in parts for assembly

IMPORTANT NOTICE:

To conform to U.S. Government international trade regulations, applicant must be a U.S. Citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State or U.S. Department of Commerce.

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2595-2579-11534
Job Location: Louisville CO
Per Diem: --
Overtime: --
Start Date: 2022-03-28
Input Date: 12/18/2021
Last Updated: 01/25/2023
Firm Name: STRUCTURES COMPANY LLC
Attention: Corey Halliday
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Planners // Multiple Positions

Description:
Manufacturing Engineer OR Planner 4

Location: San Antonio, TX
Duration: 8+ Months

Note: Bachelor’s degree is needed for Engineering and not for planner roles

Description:
Plans and leads department/organization processes for developing, implementing and maintaining various manufacturing plans, Bill of Materials, work instructions and illustrations to define and document as-built configuration. Develops and plans manufacturing concepts and strategies to support business objectives. Prepares build analyses and cost estimate reports. Leads integration of complex suppliers, processes, materials, data and technology to meet manufacturing and delivery requirements. Participates in source selection to ensure manufacturing requirements are met. Develops complex tooling requirements based on manufacturing and engineering requirements. Manages tooling from initial design to end of use disposition. Leads investigation and resolution of complex or systemic manufacturing related issues. Leads teams performing producibility assessments of design concepts. Supports enterprise level benchmarking to incorporate best practices. Leads development of complex work statements and sequencing of events to support delivery commitments. Develops scheduling templates for use by others. Drafts, updates and reviews processes and procedures to support business and regulatory agency requirements. Develops and documents new job practices, techniques and standards. Works under minimal direction.

Review Wire Harness Assembly (WHA) engineering design releases, ensuring producibility of designs and configuration management control (i.e. engineering changes). Knowledge & application experience/use of the Client WIRS system is desired (familiarity of resident reports a plus). Experience with all aspects of Wire Harness Assembly change management / processing / implementation a plus. Knowledge & demonstrated use of the Client WIRS system and Client’s Integration Visibility Tool (IVT) desired.
Experience with Wiring component standards/sourcing/supply base a plus.
Looking for experience in Functional/Flight Test, Interiors, Wiring, Payloads specifically.
Perform producibility reviews of Electrical Production Illustration drawings (Wiring Installation Drawings), and Electrical Provisions (support bracketry - details/Assemblies/Installations), ensuring design for manufacturability standards are supported and represented.
Support and drive the development, implementation, and maintaining of Electrical build plans, Bill of Materials, and Work Instructions to define and document the as-built airplane configuration. Support integration activities associated with suppliers, process development and/or enhancements, procurement kitting, and data/technology analysis to meet manufacturing and deliverable requirements.
Experience / Familiarity with all aspects of Wire Harness installation, Pre-Installation and Post-Installation Wire Harness Assembly Testing (Fully terminated Wire Harnesses, and Termination performed on aircraft), and the ability to develop wiring tooling requirements based on manufacturing and engineering requirements. Experience / familiarity with different aspects of Wire Harness testing desired.
General experience with typical committed change processes, and the ability to author impact statements in support of, desired.
Experience / familiarity with certificate of conformance, and conformity support actions in general, a plus.
Knowledge of Microsoft Office tools a must; focus being on advanced excel data analytical skills.
Knowledge of Jira Software, a plus.
Ability to work under minimal direction. Able to work within team assigned, and possess the experience to know when to reach out to other teams when warranted.

Skill Code: 67B-Electrical/Electronics
 
Job Location: San Antonio, TX
Rate: Open
Per Diem: Split
Overtime: Yes
Duration: 8 months
Start Date: ASAP
Input Date: 05/01/2023
Last Updated: 08/10/2023
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Recruiter

Description:

If you are looking for a challenging opportunity that will ignite your passion for designing cool and innovative products, are exceptionally creative, are a great problem solver and can make things happen - apply today!

As the Manufacturing Recruiter, you will be responsible for engaging in direct and indirect recruiting strategies to increase company exposure, branding, and reputation. In addition, we need you to conduct deep internet mining for passive candidates and make sound judgments on talent and exercise discretion in making independent decisions. As our Manufacturing Recruiter you will be responsible for sourcing, identifying, qualifying, interviewing, and presenting candidates to hiring managers. You will also be responsible for recruiting at all levels of talent spanning multiple skills, with strong focus on professional and exempt level positions. You will work independently on multiple projects with a strong ability to effectively prioritize and produce results within set timelines.

Your Mission
Your Mission

Work with hiring managers to accurately define position duties and requirements, developing clear job descriptions and effective job postings. Identify likely ways to effectively source candidates for difficult to fill positions.
Aggressively recruit well-qualified applicants from a variety of sources including cold calling, sourcing from various Job Boards, User Groups, networking, electronic advertising and occasional career fairs. Assist hiring managers to identify and implement effective pre-screening techniques for each position. As appropriate, coordinate phone interviews, testing, practical assessments, on-site interviews and any required travel.
Conduct in-depth telephone assessments of candidates using comprehensive behavioural interviewing and work history reviews
Lead interviewer debrief sessions and provide recommendations on hiring.
Sell the company's value proposition to candidates and successfully negotiate offers and relocation packages.
Support relocation, on-boarding and post-hire follow-up for new hires, including developing effective resources and materials.
Identify, initiate and/or participate in various efforts to continuously improve the staffing life cycle.
Participate in recruitment strategy sessions to discuss best practices in sourcing, recruiting tools, market trends and improve workflow efficiency.
Generate recruitment activity reports and drive regular status meetings with hiring teams.

What you bring
What you bring

A minimum of 2 years of heavy recruiting experience, ideally in aerospace, a start-up organization or a highly unique cultural environment.
Possess an established track record of developing strong relationships with potential employees.
Able to accurately vet technical resumes and conduct in depth technical interviews.
Experience at providing consultative recommendations and influencing hiring teams.
Fearless networker and cold caller with an understanding of how to build and track candidates.
Excellent verbal and written communication skills, and effective communication in formal and informal settings with senior executives, peers and candidates.
Excellent negotiator with a confidence-inspiring manner, and a keen sense of determination and urgency. Have a strong customer focus when dealing with both hiring managers and candidates.

ITAR Requirements

To conform to U.S. Government space technology export regulations, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by ITAR (22 CFR 120.15) or eligible to obtain the required authorizations from the U.S. Department of State.

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2305-2297-11534
Job Location:
Per Diem: --
Overtime: --
Start Date: 2022-02-25
Input Date: 11/05/2021
Last Updated: 11/28/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Material Procurement for Engineering

Description:
Material Procurement for Engineering and Technician
A brief overview of your facility and what you produce –
We are located in Madison on a beautiful campus with both manufacturing and engineering.
This position is located in the engineering building on the south end of the campus.
Our engineering organization is responsible for GEHC Anesthesia and Respiratory business.
This position is our new product development team.

Job description (feel free to attach) – Looking for an individual with experience in electronics and the electronics industry. We need procurement expertise IE: calling suppliers, distributors and warehouses. This role will procure electrical and some mechanical components for multiple engineering developments. This individual will also be expected to assist in simple test execution in a technician capacity. Looking for great people with great attitude who want to be on a great and growing team.
 
Job Number: 27372
Job Location: Waukesha, WI
Rate: 32
Per Diem: No
Overtime: Possible
Duration: Asap
Start Date: Asap
Input Date: 01/13/2022
Firm Name: ACRO SERVICE CORPORATION
Attention: Manish Anand
Address: 39209 6 MILE RD STE 250
City, State: LIVONIA, MI 48152
Phone: 734/591-1100
800 Phone: 800/844-ACRO
Fax Phone: 734/591-1217
Website: www.acrocorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer- Job ID 49116

Description:
We have an Excellent Contract to Hire position for a Mechanical Engineer to join a leading Company located in the Vista, CA surrounding area.

Job Responsibilities:
• Mechanical structures associated with large and small electromechanical systems and sub-systems
• Identify components, communicate with vendors, provide analytical suggestions for component selections
• Perform mechanical engineering duties in planning and designing mechanical structures, environmental enclosures, tools, machines, and other mechanically functioning equipment
• Oversee installation, operation, maintenance, and repair of equipment such as non-intrusive inspection X-Ray systems
• Communicate effectively with internal team members across multiple engineering areas
• Join the product development team and provide expertise for key component design requirements
• Lead preliminary and critical design reviews for subsystems during the product development process
• Collaborate with a team of scientists and engineers in order to develop a proof of concept, prototype, and production-ready systems
• Create and maintain specifications ensuring documents are well developed, accurate, and consistent.
• Adhere to existing/established internal processes and practices.

Basic Qualifications:
• Bachelor's degree with 5+ years of relevant experience or Master's degree with 4+ year experience. Additional experience may be considered instead of a degree
• Hands-on experience with defining and implementing formal design documentation for mechanical engineering designs including assembly and detail drawings, BOM's and 3D CAD modeling.
• Proficient with SolidWorks part, assembly, and mechanical drawing designs
• Proficient with Microsoft Office suite (i.e., Word, PowerPoint, Excel, and Outlook
• Proficient understanding of Engineering Mechanics (Statics and Dynamics) and Heat Transfer.
• Ability to pass TSA suitability background check

Desired Qualifications:
• Understanding of Engineering Change Order process. (ECR, ECO, ECN)
• Experience doing Finite Element Analysis
• Materials and material properties associated with outdoor platforms and electronic enclosures.
• Corrosion protection techniques and materials finishing processes
• Can effectively apply Geometric Dimensioning and Tolerancing (ANSI Y14.5).
• Experience with X-Ray device shielding and collimation is a plus

This particular client is requiring that all new hires show proof of vaccination. However, accommodations will be made for those with disabilities or religious reasons who cannot obtain a vaccine.
VEVRAA Federal Contractor / Request Priority Protected Veteran Referrals / EOE Protected Veterans/Disability
The Company will consider qualified applicants with arrest and conviction records.
To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit http://www.tadpgs.com/candidate-privacy/
 
Job Number: 49116
Job Location: Vista, CA
Rate: 58.00
Per Diem: NO
Overtime: YES
Duration: 12 Month
Start Date: ASAP
Input Date: 01/06/2022
Last Updated: 02/16/2022
Firm Name: TAD PGS INC
Attention: Maria Gomez
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NC Engineer III

Description:
Inconen is looking for an NC Engineer III for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
Extensive machine shop, CNC programming and GD&T knowledge. Experience with analyzing, vetting and quoting parts for fabrication. Skilled at fabrication and manufacturability reviews. Excellent customer service skills, comfortable engaging and discussing technical manufacturing aspects of machine shop projects with machinists and design engineers alike.

Education and Experience Requirements:
Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Four (4) years machining, planning, tool design, or related manufacturing experience to include 2 years of experience as numerical control engineer.

Position Purpose:
Under minimal supervision, perform activities related to complex numerical control (NC) programming, including machining methods, tooling concepts, and programs for NC milling machines and lathes.

Principle Duties and Responsibilities:
Essential Functions: 1. Conduct a thorough analysis of engineering drawings, tool design drawings, and/or electronic models, to determine the optimal machining methods, selection of machine tool, and material cut size. 2. Interact with planners, tool designers, engineering, and customers as required, to finalize plan. 3. Develop cutter motion logic per operation sequence, selecting proper spindle speeds and feed rates. 4. Perform a thorough check on all aspects of the program and verify cutter paths through the utilization of Vericut. 5. Develop operator set-up sheets for numerical control machines. 6. Develop flat pattern mylars and templates as required. 7. Produce 2-D Catia tool drawings as required. 8. May act as Team Leader as required, assigning work tasks, maintaining work load schedules, and setting priorities to ensure timely completion of department goals and corporate objectives.

Additional Functions: 1. Assist in training and guiding lower level engineers as needed. 2. Assist in formulating Numerical Control policies, procedures, and specifications as required. Perform other duties as assigned.

Other Requirements: 1. Excellent verbal and written communication skills required. 2. Strong knowledge of various machining and drafting methods, technical writing, and computer use. 3. Ability to read and interpret complex blueprints and engineering drawings. 4. Must be highly proficient with Catia modeling, drafting, and Catia NC Mill function. 5. Must have demonstrated expertise and a proven track record in support of company policies and rules, and consistently meeting objectives.
 
Job Number: 17082
Job Location: Savannah, GA
Rate: $58.00 - $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 10/20/2021
Last Updated: 01/14/2022
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NDT Technician - Level II

Description:

JOB TITLE: NDT Technician - Level II

LOCATION: Mojave, CA

4 to 6 month contract. Could be extended. Direct opportunities.

Join us for an exciting opportunity to create history!

We are a national staffing firm working with some of the top-tier aerospace companies in the world. The contracts are regularly extended, and direct opportunities are often available.

Qualifying Questions:

    Are you a US persons as noted in the Job description? Do you meet the educational requirements for this job? Do you meet the experience requirements for this job?
    Are you able to commute to the job location or are you able to relocate for the role?

Details:

    Contract: Ongoing Location: Mojave, CA (90 minutes from Los Angeles, CA) Contract 12 mos. - potential for direct hire Medical, dental, and vision plan with United Healthcare Robust 401K Potential for bonuses Sick pay, and holiday pay for those who qualify

Summary:

    Responsible for accomplishing assigned inspection work on space flight system hardware, assemblies and vehicles. Must have: Level II ultrasound inspection certification
      Either certified by prior employer OR certified ASNT
    Experience with automated inspections: report findings from data analysis NOTE: Inspection with thickness testing or corrosion mapping will not work here Conducts inspections utilizing a variety of NDT methods which may include but are not limited to ultrasonic, penetrant, x-ray, eddy-current, and thermal/infrared and laser shearography. Properly utilize NDT test equipment and associated tools to successfully interrogate hardware and structures, make decisions as to their acceptability for continued use and keep abreast of new and advanced test equipment. Operate manual and automated NDT equipment. Shall be required to document inspection results in both paper and electronic forms as well as complete and sign work records in connection with work performed. Inspects parts, sub-assemblies and completed assemblies to the extent necessary to determine, accomplish and approve acceptability in accordance with written procedures. Will be required to, but not limited to be working on check aircraft. Assist with development of procedures and techniques for non-destructive testing of metallic and composite structures. Support training of other NDT personnel using hands-on knowledge from the vehicles via different mediums as appropriate. Excellent attendance, ability to work overtime, and other shifts as required.

Desired Skills:

    Must have successfully completed minimum training requirements defined in NAS 410, ATA 105, or ASNT-SNT-TC-1A for a Level 2 inspector in UT and PT. Training in other NDT methods is desirable. Must have recent, documented hours, working as a NDT inspector and have obtained sufficient experience to be certified in accordance with NAS 410, ATA 105, or ASNT-SNT-TC-1A. Must have strong working knowledge of composite aircraft and/or aerospace non-destructive testing processes in composite material. Ability to conduct inspections with limited supervision. Minimum 5 years aviation/aerospace industry experience desired. Excellent computer skills. Skilled in working in Microsoft Office applications. Experience on narrow body and/or business jet aircraft preferred. Experience with composite aircraft is preferred although not required (commercial or military aerospace application). Must display maturity of action and judgment. Must be able to work under pressure and thrive in a fast-paced environment. Good communication skills. Ability to read, interpret, and communicate blueprints, specs, and other technical documents.

Physical and/or Additional Requirements

    Perform physical requirements of the position, including use of inspection hand tools, NDT equipment, lift up to 50 lbs., pass eye examination. Willing to work overtime, all shifts, travel and be on-call as necessary.

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service.

We support the majority of aerospace OEM's and tier 1 suppliers across the United States.

We have a national medical, dental, and vision plan with United Healthcare, and we also have a robust 401K offering. In addition, there is potential for bonuses, sick pay, and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

Keywords: aerospace, aviation, aircraft,

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2125-2128-11534
Job Location: Mojave CA
Per Diem: --
Overtime: --
Start Date: 2022-09-01
Input Date: 12/14/2021
Last Updated: 11/28/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Kimra Stone
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NDT Technician

Description:
The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a robust 401K offering. In some cases there is bonus potential, sick pay and holiday pay for those who qualify.



Your Mission

Responsible for accomplishing assigned inspection work on space flight system hardware, assemblies and vehicles.
Conducts inspections utilizing a variety of NDT methods which may include but are not limited to ultrasonic, penetrant, x-ray, eddy-current, and thermal/infrared and laser shearography.
Properly utilize NDT test equipment and associated tools to successfully interrogate hardware and structures, make decisions as to their acceptability for continued use and keep abreast of new and advanced test equipment.
Operate manual and automated NDT equipment.
Shall be required to document inspection results in both paper and electronic forms as well as complete and sign work records in connection with work performed.
Inspects parts, sub-assemblies and completed assemblies to the extent necessary to determine, accomplish and approve acceptability in accordance with written procedures.
Will be required to, but not limited to be working on check aircraft.
Assist with development of procedures and techniques for non-destructive testing of metallic and composite structures.
Support training of other NDT personnel using hands-on knowledge from the vehicles via different mediums as appropriate.
Excellent attendance, ability to work overtime, and other shifts as required.
What you bring

Must have successfully completed minimum training requirements defined in NAS 410, ATA 105, or ASNT-SNT-TC-1A for a Level 2 inspector in UT and PT. Training in other NDT methods is desirable.
Must have recent, documented hours, working as a NDT inspector and have obtained sufficient experience to be certified in accordance with NAS 410, ATA 105, or ASNT-SNT-TC-1A.
Must have strong working knowledge of composite aircraft and/or aerospace non-destructive testing processes in composite material.
Ability to conduct inspections with limited supervision.
Minimum 5 years aviation/aerospace industry experience desired.
Excellent computer skills. Skilled in working in Microsoft Office applications.
Experience on narrow body and/or business jet aircraft preferred.
Experience with composite aircraft is preferred although not required (commercial or military aerospace application).
Must display maturity of action and judgment.
Must be able to work under pressure and thrive in a fast-paced environment.
Good communication skills.
Ability to read, interpret, and communicate blueprints, specs, and other technical documents.
Physical and/or Additional Requirements

Perform physical requirements of the position, including use of inspection hand tools, NDT equipment, lift up to 50 lbs., pass eye examination.
Willing to work overtime, all shifts, travel and be on-call as necessary.
The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)
 
Job Location: Mojave, ca
Rate: 35-50
Per Diem: Possible
Overtime: Possible
Input Date: 01/25/2022
Last Updated: 08/16/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Packaging Design Engineer

Description:
A Packaging Design Engineer job in Palo Alto, CA is currently accepting applications. This is a contract position with our key aerospace client. In this role, you will be responsible for the design, analysis, prototype build, and testing of an actuated mechanism on the aircraft. To be considered for this role, you will have a B.S. Degree in Engineering along with at least two (2) years of relevant Mechanical Design experience of high power electronic assemblies like power supplies, converters, drive inverters or chargers.

Packaging Design Engineer Job Responsibilities:
* Design Power Electronics components like plastic housings, sheet metal brackets, insulation systems, high voltage connectors, fasteners, structural supports, transformers, etc.
* Collaborate with other mechanical, systems, electrical, safety and manufacturing engineers to optimize your design for overall vehicle performance.
* Analyze designs to ensure they meet requirements using heat transfer, thermal analysis, design for assembly, structural calculations, and failure mode analysis, etc.
* Develop engineering test plans for designs.
* Solve electrical design challenges like thermal management, HV electrical isolation, HV interconnects, shock and vibration survival, environmental sealing, electromagnetic interference, etc.
* Create component drawings and work with suppliers to manufacture your designs.
* Lead engineering prototype builds and design validation testing.

Packaging Design Engineer Job Requirements:
* B.S. Degree in Engineering
* 2+ years of relevant Mechanical Design experience.
* Experience designing components for high power electronic assemblies like power supplies, converters, drive inverters, chargers, etc.
* Demonstrated ability to design packaging for an electronics systems from a blank sheet to production.
* Experience with PCBA mechanical design.
* Experience shipping high-volume electronics products.
* Strong mechanical design analytical skill in structural analysis, fluids, thermals, heat transfer, materials, etc.
* Strong 3D design experience and skill, preferably with NX and/or SolidWorks.
* Basic understanding of electrical design fundamentals.
* Basic Matlab or Python skill.
* Familiarity with thermal and structural finite element analysis methods and tools (STAR CCM, ANSYS, ICEPACK, COMSOL).
* Experience with GD&T, design for reliability, and design for manufacturing.
* Experience with product life management systems, including BOMs and engineering change orders.
* Experience with high volume manufacturing processes such as injection molding, stamping, soldering, welding, diecast, PCB fabrication, etc.

If you are interested in this Packaging Design Engineer job in Palo Alto, CA, please apply via the 'apply now' link provided.

Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.
 
Job Number: 317383
Job Location: Palo Alto, CA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 10/22/2021
Last Updated: 04/25/2022
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principle MEMS Engineer

Description:
A Principle MEMS Engineer role located in Redmond, WA is currently available through Belcan. The Principle MEMS Engineer will lead development including concept exploration, design, analysis, testing, characterization, troubleshooting, and system integration for the MEMS team. The ideal candidate is self-motivated, seeks continual on-the-job learning, collaborates well with a small team, and is willing to help team members as needed. Expert knowledge of electro-magnetic, piezo-electric, and electrostatic actuation methods as well as MEMS material properties and fabrication and assembly processes is required.

Principle MEMS Engineer duties:

* Lead definition and validation of MEMS device requirements to meet program objectives
* Complete detailed design and analysis of electro-magnetic, piezo-electric, and electrostatic drive
MEMS devices used for sensing applications
* Perform mathematical analysis and FEA simulations driving design decisions to meet product
requirements
* Direct experimentation to validate and improve models and qualify devices
* Collaborate cross functionally to integrate MEMS with higher level optomechanical systems and
electronic control systems
* Own all aspects of MEMS system integration
* Deliver qualification / verification test plans and results to ensure devices meets all functional,
control and reliability requirements
* Contribute to the MEMS technology roadmap including assessing competitive approaches, vetting
new technology, and proposing strategic investments and partnerships
* Develop assembly methods for MEMS devices and assist in the assembly process
* Support failure analysis of MEMS devices to determine failure mode and corrective action to
improve design related faults
* Support design for reliability and reliability testing/validation
* Support characterization testing and data analysis

EDUCATION AND EXPERIENCE REQUIRED

* Bachelor's degree in Mechanical Engineering, Electrical Engineering, Physics, or related field.
Master's or PhD preferred
* Minimum of 15 years of experience in related technical field
* Demonstrated experience in a technical lead role and mentorship experience
* Excellent mechanical aptitude
* Expert knowledge of MEMS physics, operation, design, validation, assembly procedures, failure
analysis, and environmental test methods
* Expert at creating and maintaining device and system models (Ansys, Comsol or similar
software) and matching model results with characterization results
* Demonstrated ability to define and validate requirements for MEMS subcomponents and
assemblies
* Experience creating MEMS subsystem documentation, such as requirements flow-down, test
plans, drawings, and validation reports
* Broad technical understanding across multiple disciplines including mechanical and optical
systems, hardware, software, controls, and reliability engineering
* Hands on experience and willingness to learn new technologies
* Working knowledge of 3D modeling tools. SOLIDWORKS preferred
* Experience working in lab and cleanroom environments
* Experience with standard lab equipment (spectrum analyzers, oscilloscopes, signal generators,
etc.) to validate performance

If you are interested in this Principle MEMS Engineer role located in Redmond, WA please apply via the 'apply now' link provided.

Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 319500
Job Location: Redmond, WA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 01/12/2022
Last Updated: 05/05/2022
Firm Name: BELCAN TECHSERVICES
Attention: ScottWatkins
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Repair/Mod Tech C

Description:

This is a very exciting opportunity to work with one of the world's largest aerospace companies!

The contracts are regularly extended and direct opportunities are often available.

Description:

Assembles, disassembles and/or modifies systems by changing, removing, replacing or upgrading aerospace vehicle components to correct failures or implement changes. Oversees assembly, disassembly or overhaul. Configures aerospace vehicles and bench test equipment. Troubleshoots complex pneumatic, hydraulic and electrical systems to isolate mechanical or electrical faults and repair faulty components. Performs validation/verification testing of systems and components. Documents procedures and established processes to ensure contractual and regulatory compliance (e.g., repairs, test results, applicable modifications and inspection results). Inspects components and verifies repairs for flight worthiness requirements. Oversees training. Works under general direction.


seeking an experienced Training Device Technician at the Miami Training Campus in Florida. The Training Device Technician will maintain flight simulators and associated training equipment.



Position Responsibilities:

Perform general inspections for pre-operations, post-operations and component handling of training device;
Conduct functional tests of training device systems and monitors device instrumentation and bench mounted equipment.
Assist with repair and test, install, configure, upgrade and assist in the modification of simulators and training components, devices, hardware and software;
Perform general inspections for pre-operations, post-operations and component handling of training devices, assemblies and components;
Conduct functional tests of training device systems and monitors device instrumentation and bench mounted indicators;
Assist engineers in troubleshooting systems and support equipment;
Troubleshoot to isolate faults and repair faulty components;
Work under limited supervision


Employer will not sponsor applicants for employment visa status.



Basic Qualifications (Required Skills/Experience):

Must be willing to work variable shifts, including weekends and overtime. Some positions may also be rotating shifts
5+ years' experience in the field of simulation, particularly aircrew (flight) simulators and/or trainers
5+ years' experience in testing flight critical systems via simulators and hardware-in-the-loop environment
5+ years' experience with electronic/electrical systems


Preferred Qualifications (Desired Skills/Experience):

Experience in maintaining CAE, L3, TRU, and FSI Full Flight Simulators;
Experience in assisting in the modification of simulators and training components, devices, hardware and software.
Associates Degree


Typical Education / Experience:

Education/experience typically acquired through advanced education (e.g. Associate) and typically 1 or more years' related work experience or an equivalent combination of education and experience (e.g. Bachelor, 3 years' related work experience, etc.).



This position is located in a location that does not offer relocation. Candidates must live in the immediate area or relocate at their own expense.
Additional Sills:
Skills:
Category
Name
Required
Level
No items to display.
Education/experience typically acquired through basic education (e.g. High School diploma/GED) and typically 4 or more years' related work experience or an equivalent combination of education and experience (e.g. vocational school/Associate+2 years' related work, Bachelor, etc.).

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a robust 401K offering. In some cases there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2508-2494-11534
Job Location: Miami FL
Per Diem: --
Overtime: --
Start Date: 2022-03-28
Input Date: 12/15/2021
Last Updated: 09/27/2023
Firm Name: STRUCTURES COMPANY LLC
Attention: Kimra Stone
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Review Engineer 2 - Liaison Engineering

Description:
Description

Applies basic knowledge of design and/or engineering principles to develop interim or final engineering solutions to product/process issues throughout production and/or for technical, operational and quality issues that cannot be resolved by the customer. Analyzes, conducts failure analysis, root cause analysis and troubleshoots to understand root cause. Provides assistance to identify solutions. Provides written dispositions for routine design non-conformances. Supports activities to identify deviations that could impact design intent and safety and product/process improvements. Develops routine customer correspondence for continued safe operation and maintenance of equipment. Participates in Material Review Boards and Integrated Product Teams (IPTs). Ensures supplier and build partner comply with Boeing standards. Represents the engineering community in the build through post production environment. Recommends simple non-destructive test procedures, tools, standards. Conducts simple static strength analysis to validate interim design repairs meet original design loads criteria.

Required Skillsets:
1+ years of hands Electronics troubleshooting experience
ENG Degree Required

Preferred:
RF Experience

Education / Experience: Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 2 or more years' related work experience or an equivalent combination of technical education and experience (e.g. Master). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.
 
Job Number: 46182-1
Job Location: Heath, OH
Rate: DOE
Per Diem: Yes
Overtime: Yes
Duration: 6-12 months+
Start Date: ASAP
Input Date: 09/23/2021
Last Updated: 10/07/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Garrett Smart
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Assurance Certification Specialist II

Description:
Inconen is looking for a Quality Assurance Certification Specialist II for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
Working knowledge of FAA Part 21 regulations and aircraft certification processes in a Type Certificate program. Detail oriented with ability to interrogate and compare data for accuracy within systems; data tables, reports, technical documents and other records required to support conformity processes. Flexibility to work varied hours or weekends as necessary to support aircraft testing schedule. Prepare data reports, resolve data issues by interfacing with multiple organizations. Experience and high degree of comfort working with large data sets required. Experience with SAP; Solumina; SmarTeam and MS Excel preferred. Demonstrated experience with data validations, data integrity and regulatory reporting desired.

Education and Experience Requirements:
Bachelor's Degree in Engineering, aviation sciences, quality systems or related field required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 2 years related technical experience of continually increasing responsibility.

Position Purpose:
In a team-oriented environment, performs all tasks in area of responsibility in a timely and efficient manner to support aircraft certification activities performed by FAA Principal Inspectors or Gulfstream ODA IARs. Ensures the article and all associated data supports and presented for certification meets requirements in accordance with the approved Quality Assurance System and the ODA (ODA-511131-CE) Operations Manual.

Principle Duties and Responsibilities:
Essential Functions: 1. Coordinates article & aircraft certification activities to program schedule and milestones. 2. Manipulates and maintains large data sets related to configuration, article traceability and conformity of aircraft to determine status and compare to schedule and objectives. 3. Prepares and/or reviews data packages prior to submission in accordance with ODA/FAA requirements. 4. Performs data evaluation, interrogation and correlation of data between electronic systems. 5. Identifies abnormal data trends or changes, works with internal and external organizations to facilitate resolution. 6. Interprets engineering configuration data relative to manufacturing planning and deviations. 7. Monitors completion of certification tasks to ensure completion to program requirements and schedules. 8. Participates in team process improvement team projects both internal and external to quality.

Additional Functions: 1. Actively engaged and completes process improvement projects related to achieving improved quality or efficiency within their area of responsibility. 2. Actively supports corporate initiative in resource sustainability and business continuity. 3. Promotes, encourages and supports continuous improvement culture. Perform other duties as assigned.

Other Requirements: 1. An Airframe and Powerplant (A&P) license is not required. but may be used in combination with four (4) years of related quality experience (in addition to the experience requirements below) to offset the Bachelors degree. 2. ASQ certification (CQE) and/or experience as a FAA recognized airworthiness designee highly preferred. 3. Current/prior authorizations as an FAA IAR/DMIR/ODAR or DAR is preferred. 4. A&P license preferred. 5. Understands and is able to apply and communicate to others: blueprints/specifications, Federal Aviation Regulations, Quality Control System Requirements. 6. Computer literate-capable of working within the various software applications utilized throughout the corporation.
 
Job Number: 17318
Job Location: Savannah, GA
Rate: $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/23/2021
Last Updated: 02/15/2022
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Assurance Inspector

Description:
The primary responsibilities of the QA Inspector is to complete mechanical dimensional inspections of incoming components, assemblies and FAI per AS9102 STD.

Responsibilities:

Verify product and process conformance to requirements through the use of documented inspection methods and processes.
Document or record product and process non-conformances in accordance with documented processes.
Review and investigate non-conformances in accordance with documented procedures. Maintain traceability of required information through established paper-based or electronic systems.
Other inspection related activities as defined by the departmental manager.
Administration of the calibration system for tracking, pulling and recalibration of the tooling and measurement equipments.
Quality control inspector is required to communicate with production workers and work together to develop systems that promote quality.
· Assist production in the assembly of electrical systems and install components, units, subassemblies, wiring using crimping devices and soldering.

· Complete the assembly of both simple and complex components-without supervision

· Complete the fit, function and testing of assembled components

· Determine the most suitable tools and equipment necessary to perform assigned tasks.

Qualifications:

Vocational or formal electrical/mechanical training.
Deep understanding of AS9100 requirements and FA inspection.
Know how to read and interpret moderately complex blueprints.
Highly knowledgeable of blueprint reading and use of measuring tools.
Experience inspecting and testing of electronics, mechanical, molded, and cabled assemblies, as well as printed material and labeling.
Familiar with Zero Acceptance Number Sampling Plans/ANSI Z1.4 Sampling Plans or equivalent experience.
Experience handling non-conformances.
Ability to read, comprehend, and ensure compliance to internal standards, drawings, and customers’ requirements.
Experience using Excel, Word, Access.
Ability to work independently with little supervision; Good team player.
Ability to lift up to 30 lbs on a regular basis.
 
Job Number: 841
Job Location: Seattle, WA
Rate: 35
Per Diem: No
Overtime: Possible
Duration: Asap
Start Date: Asap
Input Date: 01/13/2022
Firm Name: ACRO SERVICE CORPORATION
Attention: MANISH ANAND
Address: 39209 6 MILE RD STE 250
City, State: LIVONIA, MI 48152
Phone: 734/591-1100
800 Phone: 800/844-ACRO
Fax Phone: 734/591-1217
Website: www.acrocorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Safety and Reliability Engineer

Description:
A Safety and Reliability Engineer role located in Kirkland, WA is currently available through Belcan. The Safety and Reliability Engineer will complete Reliability and Maintainability tasks to support product development on schedule, within budget and compliant with ARP4761, MIL-STD-882E and DO326A/356.

Safety and Reliability Engineer duties:

* Apply Reliability and Maintainability (R&M) principals and techniques to support the development
and production of aerospace electronic assemblies following DO-254 and DO-178 processes for
LRUs certified to IDALs of A, B, or C.
* Develop S&R program plans, reliability analyses and predictions: Failure Modes and Effects
Analysis (FMEA); -Failure Modes Effects and Criticality Analysis (FMECA); Mean Time Between
Failures (MTBF) and Bent Pin Analysis. Familiarity with Windchill/Relex and various 217
handbook and EPRD/NPRD methodologies.
* Develop Functional Hazard Analysis (FHA) through System Safety Assessments (SSA), including
Fault Tree Analysis (FTA) and Common Cause Analysis (CCA) with traceability of Basic Events to
the FMEA/FMECA process.
* Familiar with overall ARP-4761 System Safety process for Commercial applications and MIL-STD-
882e System Safety process for Military applications, including the Cyber Security processes
defined in DO-326A/356.
* Possess ability to read and understand schematic diagrams and partition circuitry into functional
blocks
* Complete analyses and safety assessments on schedule and within budget.
* Support the development team in identifying appropriate circuits and interfaces with safety
implications if exposed to fault conditions. Help define the Fault Insertion Test (FIT) strategy and
support testing effort.
* Communicate promptly and effectively with internal and external customers to clarify and
resolve R & M issues.
* Complete R & M tasks to support product development on schedule, within budget and compliant
with ARP4761, MIL-STD-882E and DO326A/356.
* Participate in design reviews and other presentations, including preparation of materials.

EDUCATION AND EXPERIENCE REQUIRED

* BSEE degree
* 5 plus years of experience.
* Familiarity with overall ARP-4761 System Safety process for Commercial applications and MIL-
STD-882e System Safety process for Military applications, including the Cyber Security processes
defined in DO-326A/356.
* Ability to work in a fast paced and team structured environment.
* Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder), or
lawfully admitted into the U.S. as a refugee or granted asylum.

If you are interested in this Safety and Reliability Engineer role located in Kirkland, WA please apply via the 'apply now' link provided.

Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.



 
Job Number: 317949
Job Location: Kirkland, WA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/12/2021
Last Updated: 03/24/2022
Firm Name: BELCAN TECHSERVICES
Attention: ScottWatkins
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Scientist Electrical Engineer - ROIC Architect

Description:
Description:

Scientist Electrical Engineer ROIC Architect

We are looking for someone who has experience in designing and architecting custom readout integrated circuits (ROICs) in state of the art image sensors. As ROIC Architect, you will specify, architect, and design analog and digital integrated circuit designs for readout ICs.

Essential Functions:

The ROIC Architect will serve as primary technical point of contact representing ROIC expertise across multiple integrated program teams. In this capacity, responsibilities will include capturing requirements in formal documentation, interfacing with sub-contract design vendors, and leading design reviews. You will provide technical direction to ROIC design team while directly contributing to the design effort.

As a key member on a growing team, you will be involved in all aspects of design including block-level design and simulation, chip-level architecture and verification, layout and physical verification, and silicon validation and characterization. The ideal candidate will have ROIC-specific design experience and a demonstrated willingness to mentor other engineers.

Qualifications:

    Bachelor's Degree and a minimum of 12 years of prior relevant experience. Graduate Degree and a minimum of 10 years of prior related experience. Position requires the ability to obtain and maintain a DOD Security Clearance, which requires U.S. Citizenship. Proven ability to understand system-level performance requirement and reduce to ROIC chip-level requirements Design lead or architect on three or more ROICs Experience designing two or more of: High speed differential I/O, A-to-D converters, bias generation, analog buffers, serializers, readout pixel unit cells Custom layout of Analog and Digital ICs from the block level to the top level Cadence Virtuoso and Mentor Calibre verification software Integrated circuit and electronics test and debug Knowledge of common image artifacts and contributing factors Knowledge of non-uniformity sources and correction methods, 3-D noise analysis Experience with large, stitched-die designs is a plus Familiarity with camera electronics and software Documentation, communication and analysis skills

Preferred Additional Skills:

    Experience with large, stitched-die designs

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2530-2514-11534
Job Location: Plano TX
Per Diem: --
Overtime: --
Start Date: 2022-02-07
Input Date: 12/09/2021
Last Updated: 01/25/2023
Firm Name: STRUCTURES COMPANY LLC
Attention: JR Gonsalves
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Avionics Software Engineer

Description:
A Senior Avionics Software Engineer job in Grand Rapids, MI is currently available at Belcan. This is a full-time direct position with benefits. To be considered, you will need a Bachelor's Degree in Computer Science, Computer Engineering, Electrical Engineering or a similar discipline. In this job, you will support requirements, design, development, coding and testing of Avionics Systems Software. Prior experience developing software for avionics systems is important.
 
Software Engineer job duties include:
· Develop safety-critical software for avionics systems.
· Complete entire software development life cycle for software applications, including requirements, design, code, and verification
· Use the latest emerging technologies and tools to solve complex engineering problems, working alongside product domain experts and technical professionals
· Support software verification and validation efforts of the embedded electronic systems.
· Write software code in C, Python and other structured programming languages.
· Analyze existing software to develop and evaluate solutions to software problem reports.

Job Qualifications:
· BS degree in Computer Science, Computer Engineering, Electrical Engineering or a similar discipline
· Mid-career and senior engineers who do well in this role are experienced with avionics systems, such as Flight Management Systems, Flight Control Systems, Integrated Modular Avionics systems, and Displays.
· Demonstrated experience making electronics and software work; performing hands-on lab work and in-office design work; and providing technical leadership on teams is important.
· You must be self-motivated, adaptable, and highly organized to thrive on this team, and if you are, you will earn responsibility, ownership, and enjoy job satisfaction.

Desired Skills:
· Knowledge of aircraft systems or other safety critical systems is required.
· Experience integrating software onto hardware platforms using specialized test equipment is required.
· The candidate must be able to work closely with customers and fellow team members to coordinate and plan software lifecycle activities.
· Experience writing software requirements and software design documentation is required.
· Experience developing software using an embedded operating system, such as VxWorks is important.
· Experience with DOORS is required.
· Experience writing low-level software, board support packages, or Assembly software is a plus.
· Demonstrated understanding of electronic hardware interfaces, including hardware errata interpretation is a plus.
 
If you are interested in this Senior Avionics Software Engineer job in Grand Rapids, MI, please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.
 
Belcan is an equal opportunity employer. EOE/M/F/D/V
Build a challenging and rewarding career with an industry leader!
http://belcan.com/

 
Job Number: 317165
Job Location: Grand Rapids, MI
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 10/14/2021
Last Updated: 06/06/2022
Firm Name: BELCAN TECHSERVICES
Attention: SumitDas
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Avionics Software Engineer

Description:
A Senior Avionics Software Engineer job in Grand Rapids, MI is currently available at Belcan. This is a full-time direct position with benefits. To be considered, you will need a Bachelor's Degree in Computer Science, Computer Engineering, Electrical Engineering or a similar discipline. In this job, you will support requirements, design, development, coding and testing of Avionics Systems Software. Prior experience developing software for avionics systems is important.
 
Software Engineer job duties include:
· Develop safety-critical software for avionics systems.
· Complete entire software development life cycle for software applications, including requirements, design, code, and verification
· Use the latest emerging technologies and tools to solve complex engineering problems, working alongside product domain experts and technical professionals
· Support software verification and validation efforts of the embedded electronic systems.
· Write software code in C, Python and other structured programming languages.
· Analyze existing software to develop and evaluate solutions to software problem reports.

Job Qualifications:
· BS degree in Computer Science, Computer Engineering, Electrical Engineering or a similar discipline
· Mid-career and senior engineers who do well in this role are experienced with avionics systems, such as Flight Management Systems, Flight Control Systems, Integrated Modular Avionics systems, and Displays.
· Demonstrated experience making electronics and software work; performing hands-on lab work and in-office design work; and providing technical leadership on teams is important.
· You must be self-motivated, adaptable, and highly organized to thrive on this team, and if you are, you will earn responsibility, ownership, and enjoy job satisfaction.

Desired Skills:
· Knowledge of aircraft systems or other safety critical systems is required.
· Experience integrating software onto hardware platforms using specialized test equipment is required.
· The candidate must be able to work closely with customers and fellow team members to coordinate and plan software lifecycle activities.
· Experience writing software requirements and software design documentation is required.
· Experience developing software using an embedded operating system, such as VxWorks is important.
· Experience with DOORS is required.
· Experience writing low-level software, board support packages, or Assembly software is a plus.
· Demonstrated understanding of electronic hardware interfaces, including hardware errata interpretation is a plus.
 
If you are interested in this Senior Avionics Software Engineer job in Grand Rapids, MI, please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.
 
Belcan is an equal opportunity employer. EOE/M/F/D/V
Build a challenging and rewarding career with an industry leader!
http://belcan.com/

 
Job Number: 317165
Job Location: Grand Rapids, MI
Rate: --
Start Date: --
Input Date: 11/03/2021
Last Updated: 06/06/2022
Firm Name: BELCAN TECHSERVICES
Attention: SumitDas
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Avionics System Engineer

Description:
A Senior Avionics Systems Engineer job in Grand Rapids, MI is currently available at Belcan. This is a full-time direct position with benefits. To be considered, you will need a Bachelor's Degree in Computer Science, Computer Engineering, Electrical Engineering or a similar discipline. In this job, you will support requirements, design, architecture, integration and verification of Avionics Systems. Prior Systems Engineering in support of avionics systems development is important. Successful candidates will have the opportunity for a long-term career where they can gravitate toward work they enjoy with people who care.
 
Systems Engineer job duties include:
· Develop system requirements and architecture for embedded electronics products.
· Work with engineers and technical representatives to translate product development ideas into structured requirements and other supporting documentation.
· Work with software and hardware designers to verify designs.
· Apply aerospace guidelines and standards independently to ensure safety-critical performance requirements are fulfilled.
· Use the latest emerging technologies and tools to solve complex engineering problems, working alongside product domain experts and technical professionals.

Job Qualifications:
· BS degree in Computer Science, Computer Engineering, Electrical Engineering or a similar discipline
· Prior avionics systems development experience
· DOORS proficiency
· Demonstrated success authoring System requirements for complex, safety-critical embedded systems.
· Mid-career and senior engineers who do well in this role are experienced with avionics systems, such as Flight Management Systems, Flight Control Systems, Integrated Modular Avionics systems, and Displays.
· You must be self-motivated, adaptable, and highly organized to thrive on this team, and if you are, you will earn responsibility, ownership, and enjoy job satisfaction.
·  
Desired Skills:
· Extensive knowledge of aircraft systems is important.
· Thorough working knowledge of regulatory guidelines (DO-160, DO-178, ARP4754, DO-254) is important.
· The candidate must be able to work closely with customers and fellow team members to coordinate and plan development activities.
· Experience writing systems requirements and system design documentation is required.
· Experience developing software using an embedded operating system, such as VxWorks is important.
· Proficiency with DOORS is required.
 
If you are interested in this Senior Avionics Systems Engineer job in Grand Rapids, MI, please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.
 
Belcan is an equal opportunity employer. EOE/M/F/D/V
Build a challenging and rewarding career with an industry leader!
http://belcan.com/

 
Job Number: 317285
Job Location: Grand Rapids, MI
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 10/16/2021
Last Updated: 06/06/2022
Firm Name: BELCAN TECHSERVICES
Attention: SumitDas
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Manager Propulsion & Fuel Systems

Description:
General Summary:
The Senior Manager of Propulsion & Fuel Systems is responsible to lead, and manage the day to day activities of the Propulsion & Fuel Systems Engineering Team to meet Program objectives. This team is responsible for the design integration of the engine, engine control system, and fuel system with the aircraft both mechanically and electronically. This includes managing the engine and fuel systems suppliers, defining and managing mechanical and electrical interfaces, and defining requirements for aircraft cockpit displays and indications to ensure safe and compliant operation, in line with all regulatory requirements and guidance material under both normal and abnormal operating conditions.

The scope of responsibility includes New Product Development and the Sustaining activities of the existing fleet.

Duties and Responsibilities:
1. Communicates effectively in both verbal and written format. Candidate should have strong presentation skills, and able to adjust communication content and approach based on audience.
2. Manages the task execution of the team to ensure on-schedule & to requirements completion.
3. Exercises tested and proven techniques to determine problem root cause and develop corrective action plans and solutions.
4. Coaches, develops, and motivates team members to achieve full potential.
5. Ensures the team works efficiently, and produces work of a high technical standard, that is fully vetted before presenting to company leadership, company DER’s or certification authorities.
6. Has a process improvement mentality, but equally a focus on design improvement and product innovation.
7. Identifies resource problems early, takes corrective action within team, or justifies need for additional resources, or support from other teams, based on quantitative analysis.
8. Interface with engine & fuel system suppliers to manage new design or enhance existing designs to meet aircraft level performance, weight, certification and cost requirements.
9. Support supplier qualification testing, and HACI flight testing as required.
10. Able to manage the certification requirements of major and minor design change projects.
11. Set departmental objectives and conduct evaluations, to ensure team is held accountable for their personal performance.



Education, Work Experience, Certification and/or Licensure:
1. BS in a related Engineering discipline, with 10-15 years directly related experience, including 5 years in a supervisory role.
2. Previous aerospace experience at aircraft OEM and / or engine manufacturer, with experience in a similar role.
3. Some Travel may be required.

Knowledge, Skills and Abilities:
1. Familiar with industry documentation for design, test, and certification of propulsion and fuel systems
2. Familiarization with both Part 33 & Part 23 FAR requirements (Or Part 33 & Part 25)
3. Familiar with Industry standards such including DO-160, DO-178, DO-254, MIL-HDBKs and SAE ARPs, including 4761 & 4754A.
4. Familiar with analytical & design tools and processes.
5. Proven record of leading and managing diverse engineering teams to achieve objectives.
6. Proficient in Microsoft Office Products.

Physical Requirements:
1. Incumbents may be occasionally exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
2. Position involves primarily desk work with a computer.
3. Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
4. Comprehend and adhere to management directions and/or safety instructions with no restrictions.
5. Effectively communicate in Business English language.
6. Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.


LARGE GAPS IN WORK HISTORY WILL DISQUALIFY
 
Job Number: N/A
Job Location: Greensboro, NC
Rate: DOE
Per Diem: Relocation
Overtime: N/A
Duration: Permanent
Start Date: Asap
Input Date: 09/21/2021
Last Updated: 05/01/2023
Firm Name: STRUCTURES COMPANY LLC
Attention: Garrett Smart
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Radio Frequency (RF) Design Engineer

Description:
Senior Radio Frequency (RF) Design Engineer
This is for is a technology company based in Albuquerque, NM dedicated to providing high quality engineering services, expert program consultation, and highly specialized technical equipment to meet our customer’s demanding requirements in cybersecurity compliance, deployable sensors, and cutting-edge research, development, test and evaluation systems.

The Company is searching for a talented senior level radio frequency (RF) Design Engineer to join our team in Albuquerque, NM. The ideal candidate will seamlessly integrate into our existing team to provide subject matter expertise in the area RF system design including antenna design, component selection, end-to-end system design, as well as detailed system modeling, simulation, and analysis. Knowledge of satellite communications, telemetry, electronic warfare, radar, and specialty systems for ISR applications is necessary.
Minimum Qualifications:
• Bachelor of Science Degree in Engineering or Physics with RF emphasis
• 7-10 years’ experience in RF system and antenna design
• Demonstrated experience in general RF theory and applications
• Strong proficiency in the operation of RF test equipment including spectrum analyzers, signal generators, scalar and vector network analyzers, bit error rate test sets, and similar equipment
• Proficiency in Microsoft Office software applications such as MS Word and Excel
• Must be able to work independently or with a team, handle the stress of multiple projects, changing schedules, and short suspense tasking
• Proficiency in DoD guidelines and standards, security procedures, testing protocols, and administrative standards
• Experience using standard commercial software tools for RF system and antenna design
Preferred Qualifications:
• Advanced degree (Master’s or Ph.D.) in Engineering or Physics with RF emphasis
• 10+ years’ experience in RF system and antenna design
• Experience using MATLAB Wireless Design Suite and / or CST Microwave Studio
Travel:
• Occasional travel, up to 25%, is required for this position. Travel will include customer and vendor visits in office/meeting environments as well as engineering support requirements which may include CONUS and OCONUS deployment aboard specialized RDT&E assets in support of customer requirements
• Candidate must be capable of meeting FAA medical flight clearance requirements
Citizenship and Clearance:
• US Citizenship is required for this position
• Candidate must meet minimum eligibility requirements to obtain a US DoD Top Secret level security clearance
This position is contingent upon contract award.
Job Type: Full-time
Benefits:
• 401(k)
• 401(k) matching
• Dental insurance
• Flexible schedule
• Health insurance
• Health savings account
• Life insurance
• Paid time off
• Retirement plan
• Tuition reimbursement
• Vision insurance
Schedule:
• 8 hour shift

PDS Tech, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status.
 
Job Number: 12471247
Job Location: Albuquerque, NM
Rate: TBD
Per Diem: No - Direct Hire
Overtime: No
Duration: Full Time
Start Date: ASAP
Input Date: 01/05/2022
Last Updated: 01/12/2022
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Kerry Moreland, Sr
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Technician-Equipment Maintenance

Description:
A Senior Technician-Equipment Maintenance role located in Gresham, Oregon is currently available through Belcan. The Senior Technician-Equipment Maintenance role will support maintenance and repair of semiconductor manufacturing equipment. Must practice excellent trouble-shooting methods and be able to work effectively in a team environment.

Senior Technician-Equipment Maintenance Requirements:

* Repair and Maintain LAM, Tel and AMAT Etch systems.
* Repair and Maintain Novellus & Mattson Strip systems.
* Trouble-shoot electronic, electrical and mechanical problems.
* Read and interpret mechanical prints and electrical/electronic schematics.
* Work with systems containing radiation, electrical, mechanical, liquid and gas hazards.
* Practice effective and productive written and verbal communication.
* Document work in maintenance logs effectively.
* Follow procedures and instructions.
* Able to contribute as a reliable and effective team member with minimal supervision.

EDUCATION AND EXPERIENCE REQUIRED:

* AA degree in a technical field,Or equivalent semiconductor industry experience, military training
or technical degree.
* 5-7 years of experience in Etch equipment maintenance.
* Solid organizational, documentation and writing skills.
* Creative problem-solving and decision-making skills.
* Self-directed, self-motivated.
* Proficient with MS Office products.

If you are interested in this Senior Technician-Equipment (Etching Machine) role located in Gresham, Oregon please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 316214
Job Location: Gresham, OR
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 10/01/2021
Last Updated: 03/04/2022
Firm Name: BELCAN TECHSERVICES
Attention: FrancisOsolnick
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Technician-Equipment Maintenance (Diffusion)

Description:
A Senior Technician-Equipment (Diffusion/RTP) role located in Gresham, Oregon is currently available through Belcan. The Senior Technician-Equipment (Diffusion/RTP) will support maintenance of semiconductor manufacturing equipment. Must practice excellent trouble-shooting methods and be able to work effectively in a team environment.

Technician-Equipment (Diffusion/RTP) Requirements:

* Repair and Maintain TEL Alpha 8 furnace systems.
* Repair and Maintain AMAT/AG RTP systems.
* Read and interpret mechanical prints and electrical/electronic schematics.
* Work with systems containing radiation, electrical, mechanical, liquid and gas hazards.
* Practice effective and productive written and verbal communication.
* Document work in maintenance logs effectively.
* Follow procedures and instructions.
* Able to contribute as a reliable and effective team member with minimal supervision.

EDUCATION AND EXPERIENCE REQUIRED:

* AA degree in a technical field Or equivalent semiconductor industry experience, military training
or technical degree.
* 5-7 years of experience in Diffusion equipment maintenance.
* Solid organizational, documentation and writing skills.
* Creative problem-solving and decision-making skills.
* Self-directed, self-motivated.
* Proficient with MS Office products.
* Must be a US Person

If you are interested in this Technician-Equipment (Diffusion/RTP) role located in Gresham, Oregon please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 316667
Job Location: Gresham, OR
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 09/28/2021
Last Updated: 02/24/2022
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Development Manager

Description:
A Software Development Manager role located in Redmond, WA is currently available through Belcan. The Senior Technician will lead a Software Development Team and collaborate with various other technical teams in the company to design and take into production market defining automotive lidar product. The ideal candidate for this position will be a highly motivated Software Enthusiast with strong people management and communication skills as well as world class expertise in areas of edge computing, automotive software, and/or perception.

Software Development Manager duties:

* Set technical direction for your team in conjunction with senior leadership.
* Grow the team by attracting and hiring exceptional talent.
* Provide hands on leadership working closely with engineers, developers, and technical project
managers to design and develop automotive lidar products.
* Lead design and efficient implementation of automotive quality software as applied to Advanced
Driver Assistant Systems (ADAS) and Autonomous Vehicles (AV).
* Lead development of embedded computing platforms with Linux and implementation of fast, low-
latency real-time algorithms and code for edge computing.
* Collaborate closely with Firmware, RTL, and Electronics teams to implement algorithms realizable
in edge devices with embedded software or directly on Silicon.
* Create and maintain design documentation, conduct design reviews.
* Manage activities of individual contributors.

EDUCATION AND EXPERIENCE REQUIRED

* B.Sc. degree in Computer Science, Electrical Engineering, or a related field and
* 7+ years of Software Development Experience including 3+ years of team lead or management
experience, or equivalent combination of higher education and experience.
* Good understanding of principles of lidar and other automotive perception sensors.
* Excellent C++ and Python programming skills.
* Solid foundation with best in class Software Development processes and tools, including source
control, bug tracking, and design documentation.
* Development experience on custom platforms utilizing Embedded Linux.
* Hands on Experience utilizing some of the following software frameworks and libraries: Computer
Vision (e.g., OpenCV), Point Cloud Processing (e.g., PCL), Parallel Computing (e.g., Cuda),
Visualization (e.g., OpenGL), Machine Learning (e.g., TensorFlow), or ML Compilers (e.g., TVM).
* Exposure to Software Projects developing to regulatory or automotive standards, such as
ASPICE, ISO 26262, or AUTOSAR.
* Excellent interpersonal, verbal and written communication skills.
* Highly organized, creative, motivated, and passionate about achieving results.

If you are interested in this Software Development Manager role located in Redmond, WA please apply via the 'apply now' link provided.

Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.


 
Job Number: 319198
Job Location: Redmond, WA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 12/29/2021
Last Updated: 03/16/2022
Firm Name: BELCAN TECHSERVICES
Attention: FrancisOsolnick
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer III (Contract)

Description:
Do you enjoy developing new products and services? Join us!
    Our Software Engineers work in an agile, collective environment. You will be using your skills and expertise to define, design, develop, test, certify and improve cutting-edge software products. These cover a very wide range from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. You'll perform coding, debugging, testing, and troubleshooting of systems and software throughout our development process. Your technical duties involve the design and development of new software products throughout the product lifecycle.

Must-haves:

    Bachelor's of Science degree in Computer Science, Software Engineering or other related discipline and typically 6 or more years of relevant experience

    Understanding of Computer Aided Engineering tools

    Practical knowledge of engineering principles and practices

    Experience working in multi-disciplinary teams

Preferred:

    Understanding of industry standard software languages such as C, C#, C++, HTML, Java, Python, and Bash

    Experience with software tools for requirements tracking, code reviews, static analysis, library and artifact repository, and automated build

    Knowledge of software development methodologies such as Agile/Scrum, Waterfall, and Spiral

    Experienced with data structures

IMPORTANT NOTICE:

To conform to U.S. Government international trade regulations, applicant must be a U.S. Citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State or U.S. Department of Commerce.

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2549-2533-11534
Job Location: Madison WI
Per Diem: --
Overtime: --
Start Date: 2022-02-23
Input Date: 12/13/2021
Last Updated: 11/28/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Corey Halliday
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr Electrical Engineer (Contract)

Description:
Are you ready to unleash your technical creativity? Dream, Innovate, Inspire and Empower the next generation to transform humanity through technology and imagination!
    Electrical engineers research, design, develop, test, certify, deploy and improve cutting edge products and services. These cover a very wide range from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. You'll conceptualize and design new products and processes throughout the product lifecycle from analog and digital electronic circuit card assemblies to fully integrated systems.

Must-haves:

    Bachelor's of Science degree in Electrical Engineering or other related discipline and typically 10 or more years of relevant experience

    Demonstrated knowledge of engineering principles and practices

    Experience with Computer Aided Engineering tools

    Progressive experience working in multi-disciplinary design and development teams

    Ability to create wiring diagrams and Harness drawings using Capital Logic / Harness XC

Preferred:

    Exposure to simulations through functional and logical models and system analysis

    Background in the Aerospace and Defense Industry

    Experience composing and analyzing Electrical Load Analysis (ELA), circuit modeling, simulation, and analysis

    Familiarity with design requirements related to High Intensity Radiated Field (HIRF) and Indirect Effects of Lightning (IEL)

    Knowledge of industry-standard electrical design principles, to include, but not limited to model-based definition, electrical component selection, manufacturing, and production processes

    Familiar with Electro Magnetic Effects (EME) to include, Electro Magnetic Compatibility (EMC) and Electro Magnetic Interference (EMI)

    Experience in digital or analog circuit design and schematic capture

    Understanding of the printed circuit board layout process and tools

IMPORTANT NOTICE:

To conform to U.S. Government international trade regulations, applicant must be a U.S. Citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State or U.S. Department of Commerce.

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2440-2428-11534
Job Location: Louisville CO
Per Diem: --
Overtime: --
Start Date: 2022-01-26
Input Date: 11/25/2021
Last Updated: 11/28/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Corey Halliday
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr Electrical Engineer (Contract)

Description:
Are you ready to unleash your technical creativity? Dream, Innovate, Inspire and Empower the next generation to transform humanity through technology and imagination!
    Electrical engineers research, design, develop, test, certify, deploy and improve cutting edge products and services. These cover a very wide range from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. You'll conceptualize and design new products and processes throughout the product lifecycle from analog and digital electronic circuit card assemblies to fully integrated systems.

Must-haves:

    Bachelor's of Science degree in Electrical Engineering or other related discipline and typically 10 or more years of relevant experience

    Demonstrated knowledge of engineering principles and practices

    Experience with Computer Aided Engineering tools

    Progressive experience working in multi-disciplinary design and development teams

    Ability to create wiring diagrams and Harness drawings using Capital Logic / Harness XC

Preferred:

    Exposure to simulations through functional and logical models and system analysis

    Background in the Aerospace and Defense Industry

    Experience composing and analyzing Electrical Load Analysis (ELA), circuit modeling, simulation, and analysis

    Familiarity with design requirements related to High Intensity Radiated Field (HIRF) and Indirect Effects of Lightning (IEL)

    Knowledge of industry-standard electrical design principles, to include, but not limited to model-based definition, electrical component selection, manufacturing, and production processes

    Familiar with Electro Magnetic Effects (EME) to include, Electro Magnetic Compatibility (EMC) and Electro Magnetic Interference (EMI)

    Experience in digital or analog circuit design and schematic capture

    Understanding of the printed circuit board layout process and tools

IMPORTANT NOTICE:

To conform to U.S. Government international trade regulations, applicant must be a U.S. Citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State or U.S. Department of Commerce.

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2442-2430-11534
Job Location: Louisville CO
Per Diem: --
Overtime: --
Start Date: 2022-01-26
Input Date: 11/25/2021
Last Updated: 11/28/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Corey Halliday
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr Test Engineer

Description:
Do you want to work for an Aerospace company working with the latest technology in the pursuit of space exploration? Do you have an eye for detail and enjoy working with amazing products and tools? Join us in championing and protecting explorers and heroes!
    As a Test Engineer at Sierra Space, you will be using your skills and expertise to simulate, test, certify and improve cutting edge products and services. These cover a very wide range from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. You'll develop complex test plans and procedures for a variety of systems to ensure the verification and validation of all product requirements. You will also be involved with the execution of the tests using top industry tools. As a cross functional engineer, you'll test system and component level new products and develop new test processes throughout the product lifecycle.

Must-haves:

    Bachelor's of Science degree in Engineering or other related discipline and typically 10 or more years of experience

    Thorough understanding of engineering principles and practices

    Experience working in multi-disciplinary design and development teams

    Advanced Knowledge of requirements management, system design, and systems integration

    Demonstrated experience planning, conducting and documenting Verification and Validation (V&V) activities

Preferred:

    Experience with various testing equipment, standards, and methodologies to include manual and automated testing

    Ability to prepare complex and professional test plans, test procedures, and test reports in order to demonstrate compliance to system requirements

    Familiarity with Product and Quality Assurance principles and experienced in generation and disposition of product non-conformances

    Experience performing certification testing for various certification organizations (i.e. FAA, NASA, DoD)

    Ability to read schematics, use service manuals, follow test procedures, and use logical trouble shooting techniques

    Background in the Aerospace and Defense Industry

IMPORTANT NOTICE:

To conform to U.S. Government international trade regulations, applicant must be a U.S. Citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State or U.S. Department of Commerce.

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2580-2564-11534
Job Location: Louisville CO
Per Diem: --
Overtime: --
Start Date: 2022-01-26
Input Date: 12/16/2021
Last Updated: 11/28/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Corey Halliday
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr Test Engineer

Description:
Do you want to work for an Aerospace company working with the latest technology in the pursuit of space exploration? Do you have an eye for detail and enjoy working with amazing products and tools? Join us in championing and protecting explorers and heroes!
    As a Test Engineer at Sierra Space, you will be using your skills and expertise to simulate, test, certify and improve cutting edge products and services. These cover a very wide range from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. You'll develop complex test plans and procedures for a variety of systems to ensure the verification and validation of all product requirements. You will also be involved with the execution of the tests using top industry tools. As a cross functional engineer, you'll test system and component level new products and develop new test processes throughout the product lifecycle.

Must-haves:

    Bachelor's of Science degree in Engineering or other related discipline and typically 10 or more years of experience

    Thorough understanding of engineering principles and practices

    Experience working in multi-disciplinary design and development teams

    Advanced Knowledge of requirements management, system design, and systems integration

    Demonstrated experience planning, conducting and documenting Verification and Validation (V&V) activities

Preferred:

    Experience with various testing equipment, standards, and methodologies to include manual and automated testing

    Ability to prepare complex and professional test plans, test procedures, and test reports in order to demonstrate compliance to system requirements

    Familiarity with Product and Quality Assurance principles and experienced in generation and disposition of product non-conformances

    Experience performing certification testing for various certification organizations (i.e. FAA, NASA, DoD)

    Ability to read schematics, use service manuals, follow test procedures, and use logical trouble shooting techniques

    Background in the Aerospace and Defense Industry

IMPORTANT NOTICE:

To conform to U.S. Government international trade regulations, applicant must be a U.S. Citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State or U.S. Department of Commerce.

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2582-2566-11534
Job Location: Louisville CO
Per Diem: --
Overtime: --
Start Date: 2022-02-23
Input Date: 12/16/2021
Last Updated: 11/28/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Corey Halliday
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr Test Engineer

Description:
Do you want to work for an Aerospace company working with the latest technology in the pursuit of space exploration? Do you have an eye for detail and enjoy working with amazing products and tools? Join us in championing and protecting explorers and heroes!
    As a Test Engineer at Sierra Space, you will be using your skills and expertise to simulate, test, certify and improve cutting edge products and services. These cover a very wide range from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. You'll develop complex test plans and procedures for a variety of systems to ensure the verification and validation of all product requirements. You will also be involved with the execution of the tests using top industry tools. As a cross functional engineer, you'll test system and component level new products and develop new test processes throughout the product lifecycle.

Must-haves:

    Bachelor's of Science degree in Engineering or other related discipline and typically 10 or more years of experience

    Thorough understanding of engineering principles and practices

    Experience working in multi-disciplinary design and development teams

    Advanced Knowledge of requirements management, system design, and systems integration

    Demonstrated experience planning, conducting and documenting Verification and Validation (V&V) activities

Preferred:

    Experience with various testing equipment, standards, and methodologies to include manual and automated testing

    Ability to prepare complex and professional test plans, test procedures, and test reports in order to demonstrate compliance to system requirements

    Familiarity with Product and Quality Assurance principles and experienced in generation and disposition of product non-conformances

    Experience performing certification testing for various certification organizations (i.e. FAA, NASA, DoD)

    Ability to read schematics, use service manuals, follow test procedures, and use logical trouble shooting techniques

    Background in the Aerospace and Defense Industry

IMPORTANT NOTICE:

To conform to U.S. Government international trade regulations, applicant must be a U.S. Citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State or U.S. Department of Commerce.

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2581-2565-11534
Job Location: Louisville CO
Per Diem: --
Overtime: --
Start Date: 2022-01-26
Input Date: 12/16/2021
Last Updated: 01/25/2023
Firm Name: STRUCTURES COMPANY LLC
Attention: Corey Halliday
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr Test Engineer

Description:
Do you want to work for an Aerospace company working with the latest technology in the pursuit of space exploration? Do you have an eye for detail and enjoy working with amazing products and tools? Join us in championing and protecting explorers and heroes!
    As a Test Engineer at Sierra Space, you will be using your skills and expertise to simulate, test, certify and improve cutting edge products and services. These cover a very wide range from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. You'll develop complex test plans and procedures for a variety of systems to ensure the verification and validation of all product requirements. You will also be involved with the execution of the tests using top industry tools. As a cross functional engineer, you'll test system and component level new products and develop new test processes throughout the product lifecycle.

Must-haves:

    Bachelor's of Science degree in Engineering or other related discipline and typically 10 or more years of experience

    Thorough understanding of engineering principles and practices

    Experience working in multi-disciplinary design and development teams

    Advanced Knowledge of requirements management, system design, and systems integration

    Demonstrated experience planning, conducting and documenting Verification and Validation (V&V) activities

Preferred:

    Experience with various testing equipment, standards, and methodologies to include manual and automated testing

    Ability to prepare complex and professional test plans, test procedures, and test reports in order to demonstrate compliance to system requirements

    Familiarity with Product and Quality Assurance principles and experienced in generation and disposition of product non-conformances

    Experience performing certification testing for various certification organizations (i.e. FAA, NASA, DoD)

    Ability to read schematics, use service manuals, follow test procedures, and use logical trouble shooting techniques

    Background in the Aerospace and Defense Industry

IMPORTANT NOTICE:

To conform to U.S. Government international trade regulations, applicant must be a U.S. Citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State or U.S. Department of Commerce.

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2583-2567-11534
Job Location: Louisville CO
Per Diem: --
Overtime: --
Start Date: 2022-01-26
Input Date: 12/16/2021
Last Updated: 01/25/2023
Firm Name: STRUCTURES COMPANY LLC
Attention: Corey Halliday
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Avionics Installer

Description:

Unique Skills:

Prior Avionics and or plumbing experience

Education and Experience Requirements
High School Diploma or GED required. Two (2) years of accredited schooling in aviation electronics and two (2) years related work experience; or four (4) years experience in an avionics/electronic career field. Ability to read and interpret blueprints and schematic diagrams.

Position Purpose:

Leads, supports, and assists the efforts of technicians performing avionics installations. Fabricates wire harnesses, installs, terminates, ring-out, and assists in functional test of avionics/electrical systems.

Job Description

Principle Duties and Responsibilities:

Essential Functions:

Provides work direction to technicians. Ensures completion of tasks within allotted time frame. Coordinates with and assists other departments to ensure on-time delivery of aircraft. Installs/modifies/fabricates wiring and electrical components, fixtures, and associated equipment in accordance with blueprints, worksheets, engineering drawings. Trains other team members in associated work assignments. Uses ability as a skilled specialist to contribute to the development of employees and techniques. Completes work in innovative and effective ways . Assists Engineering in resolving problems and makes repairs per engineering direction. Maintains required. logs and records. Ensures that work accomplished meets applicable regulatory requirements and customer specifications. . Enforces the company FOD program, tool control program, 5-S program and all safety regulations. Checks all work, including other team members, to ensure a defect free assembly prior to final inspection.

Additional Functions: 1. Properly care for and maintain shop equipment and tools as assigned by Supervisor. . 2. Coordinate shift changes in team leaders absence. . 3. Participate in continuous improvement activities (e.g YIAW, Kaizen events, etc.) . 4. Assists and fills in for team coordinator as required. .

Perform other duties as assigned.

Other Requirements: Possess a working knowledge of the Gulfstream Policies and Procedures manual, Inspection Procedures manual, and pertinent Process Specifications. Possess the proven ability to move to new tasks with only a minimal, short-term impact to established goal hours and schedule. Strong written and verbal skills required. Computer keyboard skills necessary.

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2495-2481-11534
Job Location: Savannah GA
Per Diem: --
Overtime: --
Start Date: 2021-12-06
Input Date: 12/07/2021
Last Updated: 09/21/2023
Firm Name: STRUCTURES COMPANY LLC
Attention: JR Gonsalves
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Electrical Engineer

Description:
A Sr. Electrical Engineer job in Louisville, CO is currently available through Belcan. In this role, you will be responsible for researching, designing, developing, testing, certifying, deploying and improving cutting edge products and services. To be considered for this role, you will have a Bachelors degree in Electrical Engineering or other related discipline and typically 10 or more years of relevant experience.

Sr. Electrical Engineer Job duties:

* Research, design, develop, test, certify, deploy and improve cutting edge products and services.
* Conceptualize and design new products and processes throughout the product lifecycle from analog and digital electronic circuit card assemblies to fully integrated systems.
* Create wiring diagrams and Harness drawings using Capital Logic / Harness XC.


Qualifications:

* Experience with Computer Aided Engineering tools.
* Ability to create wiring diagrams and Harness drawings using Capital Logic / Harness XC.
* Exposure to simulations through functional and logical models and system analysis.
* Experience composing and analyzing Electrical Load Analysis (ELA), circuit modeling, simulation, and analysis.

Pay Range: Up to $70/hr DOE

If you are interested in this Sr. Electrical Engineer position in Louisville, CO please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 318410
Job Location: Louisville, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/25/2021
Last Updated: 02/23/2022
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Electrical Engineer

Description:
A Sr. Electrical Engineer job in Louisville, CO is currently available through Belcan. In this role, you will be responsible for researching, designing, developing, testing, certifying, deploying and improving cutting edge products and services. To be considered for this role, you will have a Bachelors degree in Electrical Engineering or other related discipline and typically 10 or more years of relevant experience.

Sr. Electrical Engineer Job duties:
* Research, design, develop, test, certify, deploy and improve cutting edge products and services.
* Conceptualize and design new products and processes throughout the product lifecycle from analog and digital electronic circuit card assemblies to fully integrated systems.
* Create wiring diagrams and Harness drawings using Capital Logic / Harness XC.

Qualifications:
* Experience with Computer Aided Engineering tools.
* Ability to create wiring diagrams and Harness drawings using Capital Logic / Harness XC.
* Exposure to simulations through functional and logical models and system analysis.
* Experience composing and analyzing Electrical Load Analysis (ELA), circuit modeling, simulation, and analysis.

Pay Range: Up to $70/hr DOE

If you are interested in this Sr. Electrical Engineer position in Louisville, CO please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 318411
Job Location: Louisville, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/25/2021
Last Updated: 02/09/2022
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Power Electronics Engineer

Description:

No degree Required
5+ Years of Experience Required with prior Successful Integrations
US Citizen or Permanent Resident
In-Person

Starts Immediately

Lead powertrain architect, working with a team to integrate turbo generators, fuel cells, and optimize brushless DC motors on an unprecedented aerial platform. Develop and test high efficiency generator and power distribution system. Design power generation and distribution system to meet the operational and regulatory demands posed by electric aviation.

1% equitty stake offered.

    Simulate and Construct Electrical Power Generators and Feedback Control Systems Digitally & Physically Technical Knowledge of High Torque and Speed Electric Motor & Actuation System Produce Quality Documentation to Communicate across the Engineering Team Effectively Architect Power Distribution and Balancing Across Systems.


Building humanitarian aircraft. We're a group of unconventional engineers solving aviation's hardest problems. It's a place un-encumbered by bureaucracy, where your responsibility is simply your work product, and your work product has a positive impact on the world.

Preferred Skills:

    Dassault Systems 3DS Microsoft Office MATLAB BLDC Design ESC Design Python/C+

Ideal Attributes:

    Humble Communicator Self-Directed Passionate About Orb's Vision Organized (Practice 5S) Wide Knowledge Base Across Disciplines Project Management

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2468-2455-11534
Job Location: Lowell MI
Per Diem: --
Overtime: --
Start Date: 2022-01-11
Input Date: 12/03/2021
Last Updated: 09/27/2023
Firm Name: STRUCTURES COMPANY LLC
Attention: JR Gonsalves
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Program Manager

Description:
A Sr. Program Manager role located in Tempe, AZ is currently available through Belcan. The Sr. Program Manager role is multi-faceted with strong interaction with multiple Engineering disciplines including Systems, Electrical, Mechanical, and Software design teams as well as Manufacturing, Repair, Design, and Quality functions across the broader organization in support of multiple concurrent projects. It is essential that the candidate has a power electronic systems background and significant customer interfacing and presentation skills.

Sr. Program Manager duties:
* Planning: Develop plans, schedules, and budgets and identify resources required on assigned
programs or projects. Identify risk areas and develop contingency plans to eliminate or mitigate
risk hat could result in schedule delays or failure to meet technical specification or schedule
requirements.
* Management: Coordinate the activities of Engineering, Materials, Manufacturing, Quality
Assurance and other personnel to ensure that all technical and delivery requirements expected by
our customers are met on assigned programs or projects.
* Communication: Interface with customers on matters such as program issues, schedules, and
budgets. Coordinate all correspondence with appropriate personnel (e.g. President, Engineering,
Sales, etc.) and in a way that maintains our customer's confidence.
* Production: Monitor and manage all production deliverables assigned to engineering and ensure
timely delivery of products. Work with appropriate engineering staff to ensure products are
released from Engineering to Manufacturing in a timely manner.
* Budget: Manage the opening, execution, and closing of engineering budgets in a way consistent
with accounting systems, with the goal of ensuring costs are gathered accurately on each
engineering project.
* Continuous Improvement: Take the initiative to research, develop, propose, evaluate and/or
implement new methods, processes, procedures, or tools that would improve the quality,
timeliness, or cost effectiveness of products or services provided to customers.


EDUCATION AND EXPERIENCE REQUIRED:
* Bachelor of Science Electrical Engineering (or related technical degree) required
* minimum of 10 years of related technical and/or management experience
* Demonstrated leadership, managerial, and organizational skills
* Demonstrated ability to develop, articulate, and present technical or business information
appropriately to targeted audience (including technical and non-technical) and at all business
levels in written, verbal, and presentation forms.
* US Citizenship required - no sponsorship available

If you are interested in this Sr. Program Manger role located in Tempe, AZ please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.



 
Job Number: 319115
Job Location: Tempe, AZ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 12/24/2021
Last Updated: 02/14/2022
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Technician-Equipment Maintenance

Description:
A Sr. Technician-Equipment Maintenance (Implant) role located in Gresham, OR is currently available through Belcan. The Sr. Technician-Equipment Maintenance (Implant) will support Fab 4 maintenance of semiconductor manufacturing equipment. Must practice excellent trouble-shooting methods and be able to work effectively in a team environment

Sr. Technician-Equipment Maintenance (Implant) job duties:

* Maintain and repair Implant semiconductor systems.
* Effectively troubleshoot electronic, electrical and mechanical problems.
* Work with systems that contain radiation, electrical, mechanical, liquid, and gas hazards.
* Perform preventative maintenance according to schedule and specifications.
* Read and interpret mechanical prints and electrical/electronic schematics.
* Use schematics, tools, and common test equipment for calibration, diagnosis, and repair of
equipment.
* Disassemble, adjust and repair equipment according to maintenance specifications and OEM
manuals.
* Effective documentation of work in maintenance logs.
* Communicate detailed information clearly and effectively.


EDUCATION AND EXPERIENCE REQUIRED

* AA degree in Electrical Engineering, Mechanical Engineering or pertinent technical discipline (or
planned completion in current academic calendar)
* Or equivalent military training, or technical degree.
* 5-7 years of experience in Ion Implant equipment maintenance.
* Tool types: Varian VIISion 80, E220/500, VIISta HC, VIISta 810 and Axcelis GSD200 / GSD-HE
* Electronic and mechanical aptitude. Natural affinity for electronic and mechanical tinkering.
* A strong desire for personal continuous improvement and learning.
* Effective written and verbal communication skills.
* Basic IT and software skills (MS Office).
* Solid organizational, documentation and writing skills.
* Ability to contribute as an efficient and reliable team member with minimal supervision.

If you are interested in this Sr. Technician-Equipment Maintenance (Implant) role located in Gresham, OR please apply via the 'apply now' link provided.

Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.


 
Job Number: 316239
Job Location: Gresham, OR
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 10/21/2021
Last Updated: 03/04/2022
Firm Name: BELCAN TECHSERVICES
Attention: ScottWatkins
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Test Technician

Description:

Join us for an exciting opportunity to create history!

We are a national staffing firm working with some of the top tier aerospace companies in the world. Our client is looking for nine (9) Avionics Technician to start work right away.

Details:

    Shift: 1st shift, 4x 10 schedule Contract: Ongoing Location: Mojave, CA (90 minutes from Los Angeles, CA) Contract 12 mos. - potential for extended term Medical, dental, and vision plan with United Healthcare Robust 401K Potential for bonuses Sick pay and holiday pay for those who qualify

Summary:

    Prepare and conduct tests of composites for mechanical properties E.g.: flexural, tensile, compressive strength, modulus, elongation cantilever testing, etc.
    Fabricate test article instrumentation, electro-mechanical assemblies and test equipment wire harnesses Assist engineers and technicians on R&D and other projects as needed Set up, calibrate, and fabricate test components and carry out laboratory, assembly and vehicle testing Bonding and machining of test coupons. Collect test data and report results to designated managers and engineers. Assist in the design and fabrication of special test fixtures and test setups Operation of test equipment (LabVIEW, United and Instron mechanical test machines, environmental chambers, vibration tables, and altitude chambers) Knowledge of shop floor manufacturing techniques and inspection technology preferred

Desired Skills:

    5+ years of experience in testing, aerospace, manufacturing, or a similar highly controlled environment preferred. Experience with the following: Schematics, engineering drawings, circuit layouts and parts lists Cable harnesses: Wire diagrams, layout drawings, and parts lists Mechanical assemblies: Mechanical drawings and parts lists Instrumentation: strain gages, extensometers, load cells, and pressure transducers.
    Experience performing electronic testing and inspection using portable measuring devices. Experience in environmental, pressure, vibe, and hydraulic testing Computer software proficiency, preferably including laboratory or industrial applications, and technical writing skills Must possess excellent interpersonal and verbal communication skills, and be able to maintain good will in a potentially adversarial role Requires basic understanding of electronics, test equipment, mechanical test methods and electro-mechanical testing Capable of running tension/compression test machine and related software. Applicants must be U.S. persons as defined by the ITAR (22 CFR 120.15)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service.

We support the majority of aerospace OEM's and tier 1 suppliers across the United States.

We have a national medical, dental, and vision plan with United Healthcare, and we also have a robust 401K offering. In addition, there is potential for bonuses, sick pay, and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2633-2617-11534
Job Location: Mojave CA
Per Diem: --
Overtime: --
Start Date: 2022-09-19
Input Date: 12/31/2021
Last Updated: 11/28/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Kimra Stone
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer 4

Description:
The candidate for this position will guide product design to incorporate new technology and verify structural integrity of various crewed and uncrewed aerial vehicles across commercial and military aircraft, rotorcraft, and spacecraft. Will employ efficient integration of both composite and metallic constructions. Solve complex structural problems by using analytical methods, finite element models/simulations and other analysis tools throughout the development lifecycle.

Requirements:
- BS in Aerospace / Mechanical Engineering or related discipline
- Minimum of 9 years’ experience in the stress analysis field, preferably aerospace or an equivalent combination of technical education and experience – PhD+4 years’ related work experience, MS+7 years’ related work experience
- Must be a US Citizen or Legal US Permanent Resident
- Strong English written, verbal, and electronic communication skills
- Proficiency with Microsoft Office 365 and Windows 10
- Strong experience in classical hand analysis for strength and stability of metallic and composite components
- Working knowledge of MIL-HDBK-516, or FAR Part 23, 25, 27 certification requirements
- Demonstrate proficiency in FEM idealization and good modeling practices using Femap, Nastran, ANSYS, Abacus or other FEA packages
- Experience with a 3D CAD package CATIA V5, Solidworks, Creo, NX/Unigraphics, Fusion 360, etc
- Ability to explain and present analysis and assumptions in a rational manner to customers, leadership, and teammates
- Work at our Manassas VA


Specific Responsibilities:
- Define and document process, certification, and test results to substantiate for customers and regulatory agencies that requirements are satisfied.
- Develop analytical processes/tools to improve effectiveness, quality and efficiency of the development effort.
- Work as an individual contributor under minimal direction.
- Write technical reports that are accurate, clear, and comprehensive with minimal review. Provide review and feedback to other analysts
- Lead small teams (3+) and give technical guidance during any stage/level of a program development
- Be proactive in teaching others, sharing experiences, and learning new skills
- Maintain good communication with customers, leadership, or teammates when onsite or remote
- Think ahead and ask questions. Making mistakes is acceptable if we understand and learn from them. Focus on fixing problems when they arise and not placing blame
Desired Skills:
- Experience with prototype development and testing of airframe primary structure
- Automate workflows for speed and efficiency using Microsoft Office 365, VBA, Python, Matlab, or Boeing custom tools
- Experience with fatigue and damage tolerance analysis, categorization of part criticality
- Experience in writing certification reports for Military or FAR Part 23/25/27
- Experience working with FAA or Military DERs
- Resource planning and task estimation for a complex effort supporting bid & proposal
- Able to support the resolution of complex aircraft structural challenges by applying various learned aerospace industry standard classical analysis techniques for both metallic and composite structures
- Cross-disciplinary interests are strongly desired; we love people that combine world-class expertise with a diverse background, hands on experience, and interesting hobbies




The Structures Company LLC is an AA/EOE.
 
Job Number: 525
Job Location: Manassas, VA
Rate: $75-$82/Hr. **DOE**
Per Diem: Yes
Duration: 6 Months
Start Date: 10/1/2021
Input Date: 07/22/2022
Last Updated: 01/26/2023
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Supplier Quality Specialist 3

Description:

This is a very exciting opportunity to work with one of the world's largest aerospace companies!

The contracts are regularly extended and direct opportunities are often available.

Description:

***POSITION IS LOCATED IN BOULDER CO OR TULSA OK. CANDIDATE WILL NEED TO BE WITHIN THE VICINITY OF BOULDER OR TULSA (LESS THAN 50 MILES).***

The selected candidate will provide assistance to assigned company Supplier Quality Representative(s). Primary duties include but are not limited to: performing product verification activities (i.e. Source Inspection and First Article Inspection). The candidate may be asked to assist with supplier performance monitoring and data analytics, conduct supplier audits/assessments, perform corrective action verification, implement supplier preventative actions and participate in supplier development/continuous improvement activities/projects. We are seeking a candidate that has a high degree of knowledge and practical experience in one or more of the following areas: machining, precision inspection, assembly, electric/mechanical, and/or electronic/electrical/wiring.

This job requires the candidate to be a US Citizen, work independently at suppliers, pass annual vision exams, and travel to/from suppliers.

Plans and conducts audits and assessments of supplier's systems, processes and products. Documents and reports audit and assessment results. Inspects or verifies products for compliance with requirements. Assists with assessments of supplier capability and capacity to perform current or potential future work. Provides supplier education and coaching on quality systems, regulatory compliance issues and company initiatives. Resolves routine issues and concerns.

We are seeking a candidate that has a high degree of knowledge and practical experience in one or more of the following areas: machining, precision inspection, assembly and electric wire harness assembly/mechanical.

PREFERRED:
Federal Aviation Regulations & Industry Knowlege
Microsoft Word, Excel & Powepoint
Aircraft Certification
Qualitiy Assurance Auditing & Control experience
Assembly Process Knowledge
Wire Assembly
Root Cause Analysis & Corrective actions


The candidate should be located at/near (50 mile radius). Candidates may be asked to perform their work from an alternative location (i.e. home office) or supplier facility. If/when a candidate operates from their residence they must have the following: a dedicated office space with a high speed internet connection that supports effective use of simultaneous email, use of company Virtual Private Network (VPN), 2-way video conference, upload/download data, and general website usage. Candidates will follow required manufacturing standards for safety equipment (i.e. hard hat, safety shoes, and/or safety glasses). The scope of this position involves on-call work up to 32 hours per week with variable scheduling.

The selected candidate will be required to travel to/from different suppliers as needed. Travel within the state and adjacent states will be required. Occasionally, the candidate may be requested by management to travel and stay overnight to support the work (< 10% overnight stay).
Must have POV & valid drivers license
Education/experience typically acquired through advanced education (e.g. Bachelor) and typically 6 or more years' related work experience or an equivalent combination of education and experience (e.g. Master+4 years' related work experience, 10 years' related work experience, etc.).
Job applicant will need to be < 50 miles away from the requisition location to ensure adequate support of master schedule, as candidate will be visiting supplier sites daily. Job applicant will be asked to occasionally travel outside of their state to support activities if/when requested by management.

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a 401K offering. In some states and on some openings there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 1873-1876-11534
Job Location: Boulder CO
Per Diem: --
Overtime: --
Start Date: 2022-01-17
Input Date: 12/30/2021
Last Updated: 09/27/2023
Firm Name: STRUCTURES COMPANY LLC
Attention: Kimra Stone
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Supplier Quality Specialist 3 - PART TIME

Description:

This is a very exciting opportunity to work with one of the world's largest aerospace companies!

The contracts are regularly extended and direct opportunities are often available.

Plans and conducts inspection of supplier's products. Documents and reports results. Inspects or verifies products for compliance with requirements. Provides supplier education and coaching on quality systems, regulatory compliance issues and company initiatives. Resolves routine issues and concerns.

Additionally, quality assurance aerospace experience required in hardware inspection. Ability to read and understand blueprints drawings. Medium to advance Data base systems and excel experience. This is a virtual assignment, traveling domestically to suppliers' facilities approximately 90% within NY State particularly in the Buffalo area and 10% in neighboring state. On-call assignment with approximately between 20-25 hours weekly. Candidates must reside within an 40 mile radius from Buffalo, NY in order to timely support the assignment. Candidate must have successfully completed either IPC-610 and/or IPC-620 training and have knowledge of mechanical/electrical parts. Candidate will be inspecting cable mechanical/electrical parts and electronics. Candidate must be available to submit to vision test.

Travel to different supplier sites is required and will be determined on an as needed basis and schedule
Additional Skills:
Skills: Education/experience typically acquired through advanced education (e.g. Bachelor) and typically 6 or more years' related work experience or an equivalent combination of education and experience (e.g. Master+4 years' related work experience, 10 years' related work experience, etc.).

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a 401K offering. In some states and on some openings there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2610-2594-11534
Job Location: Johnson City NY
Per Diem: --
Overtime: --
Start Date: 2022-04-18
Input Date: 12/30/2021
Last Updated: 03/28/2024
Firm Name: STRUCTURES COMPANY LLC
Attention: Tania Martinez
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: 11534_submissions@ceipalsubsrouting.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
System Integration Inspector Sr

Description:
Sr. Systems Integration Inspector

Perform all required inspections operations on mechanical, electrical and electronic parts, assemblies, tooling and software during receiving, fabrication, assembly, modification, rework, repair, installation, test and shipping in a team environment. Participate in or conduct First Article inspections of mechanical, electrical or electronic equipment for completeness and conformance with applicable drawings and specifications. Coordinate with engineering, customers, vendors, production workers and other Quality Assurance people as required to complete given tasks. Provide technical assistance while solving problems and recommend corrective action to be taken to prevent recurrence of rejections. Shift assigned will be based on bargaining unit agreements.


• Use and interpret DoD, NASA and Boeing blueprints, specifications, directives, documents, manuals, inspection plans and other similar information pertaining to Quality Assurance.
• Set up and operate measuring instruments and equipment necessary to accomplish work assignments.
• Follow inspection and statistical sampling procedures to accept or reject materials and adjust inspection levels.
• Interpret statistical process control charts and coordinate corrective actions and adjustments with quality engineering.
• Move materials from place to place within the work area. This material can include not only parts, sub-assemblies and assemblies, but also tools, jigs, equipment, documentation, and other supplies as necessary for inspection and or assembly/test of products. This may include the packaging or unpackaging of raw material and/or finished products.
• Setup equipment and perform tests on various products and assemblies using manual, semi-automatic, or automated test devices.
• Witness, evaluate, certify and record certification testing data and maintain personal certifications as work requires.
• Inspect incoming and outgoing shipments for proper identification, quantity, damage, packaging, paperwork, shipping instructions, and perform appropriate dimensional, composition, non-destructive, destructive and inspection.
• Review recurring discrepancies to ascertain cause and corrections required.
• Review completed inspection records to assure compliance with pertinent written directives and other program direction.
• Conduct internal reviews to assure compliance with the Quality Manual and other procedures such as Quality Instructions, Sampling Plans and Operating Procedures.
• Prepare and edit reports for approval by supervision.
• Assist Manufacturing QA Manager in continuous process improvement efforts.
• Maintain work area in a clean and orderly condition.
• Maintain licenses, permits and certifications required to perform assigned work.
• Perform other duties as assigned within general job classification.

Basic Qualifications

• Minimum 3 years of experience working with circuit card and/or electronics manufacturing
• Experience working to J-STD with Space Addendum
• High School Diploma or GED

Preferred Qualifications:

• More than 3 years of experience performing dimensional, composition, non-destructive, destructive and/or inspections.
• Experience with gathering data and performing a Root Cause Corrective Action (RCCA).
 
Job Number: JPC-1896
Job Location: AL
Rate: 23 HR
Input Date: 10/20/2021
Last Updated: 09/30/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Diego villegas
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer ( Dulles, VA ) 4112-1

Description:
Systems Engineer ( Dulles, VA ) 4112-1
9 Month Contract

Pay Rate: $55-65/hr W2 Maybe more for the right candidate.

Job Description:
In this role, the Systems Engineer will perform analysis, design, or test of one or more moderately complex (or portions of complex) mechanical/structural components, subsystems, and/or functional systems. The candidate will analyze requirements for mechanical/structural component, subsystem, and/or functional systems. The candidate should be able to select applicable analytical data from previous systems, determine the technical principles involved, mathematically define the problem and compute the engineering characteristics consistent with the specifications, design needs and requirements of other portions of the system, and follow up by releasing the results as design data (once reviewed by a higher graded engineer). The engineer will develop original ideas, elaborate on preliminary design concepts, evaluate completed designs with their program/functional supervisors and other technical groups, and make the necessary design modifications to achieve the best design within the program constraints. The candidate may also develop and coordinate the conduct of test programs required to evaluate design work.
Desired experience includes Requirements Management Tools such as DOORS, Cradle, or CORE, and various analysis engineering tools, such as MATLAB, MATHCAD, and STK. Actual spacecraft operations and related ground systems expertise is always a plus. Additional experience in any of the following areas is also desired: orbital mechanics, power systems modeling, avionics or digital electronics design, telecommunications design, risk analysis, thermal design and analysis, or integration and testing (either at the spacecraft or payload level).

Duties:
- Provide support to selected elements of the program Systems Engineering Team
- Support and deliver SE Products and other deliverables, with a focus on mission success
- Troubleshoot and develop solutions to challenging Engineering problems
- Contribute to the technical management of program elements
- Provide systems engineering support for technical reviews
- Write status and technical performance reviews, analyses and reports
Qualifications:

REQUIRED QUALIFICATIONS:
- Bachelor’s degree or higher in an Engineering or related field
- three to Seven years of related experience
- Thorough understanding of the Systems Engineering process
- Strong oral and written communication skills
- Aptitude for understanding system and subsystem interactions
- Experience defining requirements and interfaces

PREFERRED QUALIFICATIONS:
- Understanding of spacecraft integration & test, launch, and mission operations
- Experience with human spaceflight vehicle development including integration & test
- Experience developing verification documentation
- Experience with architecture development
- Master’s degree in a technical discipline (with five years of professional experience)
 
Job Number: 4112-1
Job Location: Dulles, VA
Rate: 60
Per Diem: Yes
Overtime: yes
Duration: 9 Month
Start Date: ASAP
Input Date: 01/07/2022
Last Updated: 01/31/2022
Firm Name: TALENTPRO CONSULTING
Attention: Tim Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer 4 - Everett, WA

Description:
Systems Engineer 4

Location: Everett, WA
Duration: 6+ months with possible extension

Note: Need experience with System Requirements, Certification, Qualification and Testing

Description:
Leads work with customers to develop and document complex electronic and electrical system requirements. Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications. Leads work to test and validate to ensure system designs meet operational and functional requirements. Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches technology advances for potential application to company business needs. Makes recommendations for technology investments.

Education / Experience:
Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry .

Skill Code: 664-Electronic Sys Design & Analy
 
Job Location: Everett, WA
Rate: $80
Per Diem: Split
Overtime: Possible
Duration: 6 months
Start Date: ASAP
Input Date: 05/01/2023
Last Updated: 08/10/2023
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer 4 - HOT HOT HOT!

Description:

Very exciting opportunity to work with one of the world's largest aerospace companies!

The contracts are regularly extended and direct opportunities are often available.

Description:

Systems Architecture and Definition Engineer

Applies an interdisciplinary, collaborative approach to plan, design, develop and verify complex lifecycle balanced system of systems and system solutions. Evaluates customer/operational needs to define and coordinate system performance requirements, integrate technical parameters and assure compatibility of all physical, functional and program interfaces. Performs various analyses to optimize total system of systems and/or system architecture. Performs analyses for affordability, safety, reliability, maintainability, testability, human systems integration, survivability, vulnerability, susceptibility, system security, regulatory, certification, product assurance and other specialties quality factors into a preferred configuration to ensure mission success. Develops, maintains and identifies improvements for the planning, organization, implementation and monitoring of requirements management processes, tools, risk, issues, opportunity management and technology readiness assessment processes. Resolves cross-functional technical issues.

Systems Engineering, System Integration, Design Integration Responsibilities May Include:
Apply interdisciplinary, collaborative approaches to plan, design, develop and verify system solutions.
Define and coordinate system performance requirements and integrate technical parameters.
Develop and document electronic and electrical system requirements
Perform analysis to optimize total system and/or system architecture to solve complex missile defense problems.
Define high level functional and performance requirements and verification methods, subsequent analysis, decomposition, and derivation of requirements, allocation of those lower-level requirements to physical and functional architectural elements, and tracking them through design, verification, integration, and operational validation
Develop verification and validation methods, processes, logic, and plans in support of program milestones.
Analyze and translate requirements into system architecture, hardware and software designs and interface specifications
Perform analyses for affordability, safety, reliability, maintainability, testability, survivability, human systems integration, survivability, vulnerability, susceptibility, system security, regulatory, certification, product assurance, product security (cyber security) and other specialties quality factors into a preferred configuration to ensure mission success.
Utilization of Model-Based Systems Engineering (MBSE) tools such as DOORS, Cameo, and mathematical modeling and simulation to develop system definitions and perform trade studies in assigned areas
Systems and Performance Analysis, Model & Sim, Algorithm Development Responsibilities May Include:
Evaluate systems under various scenarios and architectures to determine and/or optimize overall system mission performance in a framework giving insight into performance
Perform analysis to optimize total system of systems and/or system architecture to solve complex missile defense problems.
Develop and maintain analysis tools of varied fidelity including modeling and simulation tools to predict performance against evolving threats of current and future missile defense systems
Perform systems analyses of the existing system architecture in conjunction with new technologies and concepts for improvements to be considered for future architectures
Develop, refine and document key algorithm capabilities to support various DoD customers
Conducts analysis of multiple targets discrimination for survivability, vulnerability, and susceptibility into a preferred configuration to ensure mission success

Model Based Engineering / Systems Engineering
Development of Model-Based Systems Engineering (MBSE) tools, processes and architectures
Configuration, data and work flow management of program specific MBSE tools and processes
Establishment of protocol / process for integration of engineering tools with MBSE
Examples of current open positions / typical work scope:
Model Based Engineering Team:
of Model-Based Systems Engineering (MBSE) tools, processes and architectures for missile and weapons systems. Responsible for tailoring and deploying MBE/MBSE techniques to MWS Programs.

Preferred Qualifications (Desired Skills/Experience):
Experience applying systems engineering processes and principles
Experience/domain knowledge of system architecture, requirements, interface definition, verification, and validation
Experience with complex systems development and integration
Experience modeling or simulating complex systems
Experience with implementation and maintenance of systems engineering tools, schedules and metrics (i.e. Earned value management, DOORs, CAMEO)
Experience with Model Based Systems Engineering
Understanding of statistical analysis, distributions, and sampling
6 months possible extension
This position requires that you work on-site in OKC, candidate must be local

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a robust 401K offering. In some cases there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2245-2242-11534
Job Location: Oklahoma City OK
Per Diem: --
Overtime: --
Start Date: 2022-01-14
Input Date: 11/04/2021
Last Updated: 09/19/2023
Firm Name: STRUCTURES COMPANY LLC
Attention: Kimra Stone
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer 4 - Integration and Validation HIRING FAST!!!

Description:

Very exciting opportunity to work with one of the world's largest aerospace companies!

The contracts are regularly extended and direct opportunities are often available.

Description:

Systems Integration and Validation Engr

Applies an interdisciplinary, collaborative approach to plan, design, develop and verify complex lifecycle balanced system of systems and system solutions. Evaluates customer/operational needs to define and coordinate system performance requirements, integrate technical parameters and assure compatibility of all physical, functional and program interfaces. Performs various analyses to optimize total system of systems and/or system architecture. Performs analyses for affordability, safety, reliability, maintainability, testability, human systems integration, survivability, vulnerability, susceptibility, system security, regulatory, certification, product assurance and other specialties quality factors into a preferred configuration to ensure mission success. Develops, maintains and identifies improvements for the planning, organization, implementation and monitoring of requirements management processes, tools, risk, issues, opportunity management and technology readiness assessment processes. Resolves cross-functional technical issues.

Job Description Qualifications:
The B-52/ASC2/ETSS programs are seeking experienced Systems Engineers to join our Systems Integration Laboratory team in Oklahoma City. In this role, the successful candidate with be providing support for development of the RMP/CERP/AWACS/AEWC/ETSS SILs as well as provide oversight in the areas of Electronic Warfare integration and overall Labs RIO management. The SILs laboratories to be used for software development, integration and testing.

POSITION RESPONSIBILITIES
Duties will include but not limited to:
Applies an interdisciplinary, collaborative approach to plan, design, develop and verify system and subsystem requirements.
Develops system test plans and creates requirement verification links to test procedures in DOORS.
Works with multi-disciplinary team to track progress of system development and availability to support test activities.
Researches, analyzes, and compiles technical data for company products and system-level concepts in the projected operational environments to optimize effectiveness over the program lifecycle.
Applies systems engineering processes, methodologies and tools to the design of system of systems, systems and new product development.
Assists with the development of system requirements, functional requirements, and allocation of the same to individual hardware, software, facility, and personnel components
Coordinates the resolution of action items from Configuration Control Board (CCB) meetings, design reviews, program reviews, and test reviews that require cross-discipline coordination
Resolves cross-functional technical issues
Develops the planning, organization, implementation and monitoring of requirements management processes, tools, risk, issues, opportunity management and technology readiness assessment processes.

Basic Qualifications (Required Skills/Experience):
* Bachelor's degree in engineering or related discipline and 5 or more years' experience.
* 2+ years' experience with Systems Engineering principles
* This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship.

Preferred Qualifications (Desired Skills/Experience):
* Experience with Radar systems development and test
* Experience with electronic warfare integration
* Experience with BORIS
6 months possible extension
This position requires that you work on-site in OKC, candidate must be local

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a robust 401K offering. In some cases there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2246-2243-11534
Job Location: Oklahoma City OK
Per Diem: --
Overtime: --
Start Date: 2022-01-10
Input Date: 11/04/2021
Last Updated: 09/27/2023
Firm Name: STRUCTURES COMPANY LLC
Attention: Kimra Stone
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Integration Inspector SR

Description:

This is a very exciting opportunity to work with one of the world's largest aerospace companies!

The contracts are regularly extended and direct opportunities are often available.

Sr. Systems Integration Inspector

Perform all required inspections operations on mechanical, electrical and electronic parts, assemblies, tooling and software during receiving, fabrication, assembly, modification, rework, repair, installation, test and shipping in a team environment. Participate in or conduct First Article inspections of mechanical, electrical or electronic equipment for completeness and conformance with applicable drawings and specifications. Coordinate with engineering, customers, vendors, production workers and other Quality Assurance people as required to complete given tasks. Provide technical assistance while solving problems and recommend corrective action to be taken to prevent recurrence of rejections. Shift assigned will be based on bargaining unit agreements.

The Company Strategic Missile Defense System's (SMDS) Quality organization is seeking an experienced Quality Inspector in Huntsville, AL in the Electronic Center of Excellence.

Use and interpret DoD, NASA and blueprints, specifications, directives, documents, manuals, inspection plans and other similar information pertaining to Quality Assurance.
Set up and operate measuring instruments and equipment necessary to accomplish work assignments.
Follow inspection and statistical sampling procedures to accept or reject materials and adjust inspection levels.
Interpret statistical process control charts and coordinate corrective actions and adjustments with quality engineering.
Move materials from place to place within the work area. This material can include not only parts, sub-assemblies and assemblies, but also tools, jigs, equipment, documentation, and other supplies as necessary for inspection and or assembly/test of products. This may include the packaging or unpackaging of raw material and/or finished products.
Setup equipment and perform tests on various products and assemblies using manual, semi-automatic, or automated test devices.
Witness, evaluate, certify and record certification testing data and maintain personal certifications as work requires.
Inspect incoming and outgoing shipments for proper identification, quantity, damage, packaging, paperwork, shipping instructions, and perform appropriate dimensional, composition, non-destructive, destructive and inspection.
Review recurring discrepancies to ascertain cause and corrections required.
Review completed inspection records to assure compliance with pertinent written directives and other program direction.
Conduct internal reviews to assure compliance with the Quality Manual and other procedures such as Quality Instructions, Sampling Plans and Operating Procedures.
Prepare and edit reports for approval by supervision.
Assist Manufacturing QA Manager in continuous process improvement efforts.
Maintain work area in a clean and orderly condition.
Maintain licenses, permits and certifications required to perform assigned work.
Perform other duties as assigned within general job classification.

Basic Qualifications

Minimum 3 years of experience working with circuit card and/or electronics manufacturing
Experience working to J-STD with Space Addendum
High School Diploma or GED

Preferred Qualifications:

More than 3 years of experience performing dimensional, composition, non-destructive, destructive and/or inspections.
Experience with gathering data and performing a Root Cause Corrective Action (RCCA).
Additional Skills:
*No clearances required

Must be able to work any of the following shifts:
2nd shift: 2-10:30pm, 3-11:30pm or 3rd shift 10:30am-5:30pm
Candidate must work 100% onsite; no remote option

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a 401K offering. In some states and on some openings there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2131-2134-11534
Job Location: Huntsville AL
Per Diem: --
Overtime: --
Start Date: 2022-03-15
Input Date: 01/04/2022
Last Updated: 09/27/2023
Firm Name: STRUCTURES COMPANY LLC
Attention: Tania Martinez
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Integration Inspector SR

Description:

This is a very exciting opportunity to work with one of the world's largest aerospace companies!

The contracts are regularly extended and direct opportunities are often available.

Sr. Systems Integration Inspector

Perform all required inspections operations on mechanical, electrical and electronic parts, assemblies, tooling and software during receiving, fabrication, assembly, modification, rework, repair, installation, test and shipping in a team environment. Participate in or conduct First Article inspections of mechanical, electrical or electronic equipment for completeness and conformance with applicable drawings and specifications. Coordinate with engineering, customers, vendors, production workers and other Quality Assurance people as required to complete given tasks. Provide technical assistance while solving problems and recommend corrective action to be taken to prevent recurrence of rejections. Shift assigned will be based on bargaining unit agreements.

The Strategic Missile Defense System's (SMDS) Quality organization is seeking an experienced Quality Inspector in Huntsville, AL in the Electronic Center of Excellence.

Use and interpret DoD, NASA and blueprints, specifications, directives, documents, manuals, inspection plans and other similar information pertaining to Quality Assurance.
Set up and operate measuring instruments and equipment necessary to accomplish work assignments.
Follow inspection and statistical sampling procedures to accept or reject materials and adjust inspection levels.
Interpret statistical process control charts and coordinate corrective actions and adjustments with quality engineering.
Move materials from place to place within the work area. This material can include not only parts, sub-assemblies and assemblies, but also tools, jigs, equipment, documentation, and other supplies as necessary for inspection and or assembly/test of products. This may include the packaging or unpackaging of raw material and/or finished products.
Setup equipment and perform tests on various products and assemblies using manual, semi-automatic, or automated test devices.
Witness, evaluate, certify and record certification testing data and maintain personal certifications as work requires.
Inspect incoming and outgoing shipments for proper identification, quantity, damage, packaging, paperwork, shipping instructions, and perform appropriate dimensional, composition, non-destructive, destructive and inspection.
Review recurring discrepancies to ascertain cause and corrections required.
Review completed inspection records to assure compliance with pertinent written directives and other program direction.
Conduct internal reviews to assure compliance with the Quality Manual and other procedures such as Quality Instructions, Sampling Plans and Operating Procedures.
Prepare and edit reports for approval by supervision.
Assist Manufacturing QA Manager in continuous process improvement efforts.
Maintain work area in a clean and orderly condition.
Maintain licenses, permits and certifications required to perform assigned work.
Perform other duties as assigned within general job classification.

Basic Qualifications

Minimum 3 years of experience working with circuit card and/or electronics manufacturing
Experience working to J-STD with Space Addendum
High School Diploma or GED

Preferred Qualifications:

More than 3 years of experience performing dimensional, composition, non-destructive, destructive and/or inspections.
Experience with gathering data and performing a Root Cause Corrective Action (RCCA).
Additional Skills:
*No clearances required
Candidate must work 100% onsite; no remote option

Must be able to work any of the following shifts:
2nd shift: 2-10:30pm, 3-11:30pm or 3rd shift 10:30am-5:30pm

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a 401K offering. In some states and on some openings there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2128-2131-11534
Job Location: Huntsville AL
Per Diem: --
Overtime: --
Start Date: 2022-02-18
Input Date: 01/04/2022
Last Updated: 09/27/2023
Firm Name: STRUCTURES COMPANY LLC
Attention: Tania Martinez
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Integration Inspector SR

Description:

This is a very exciting opportunity to work with one of the world's largest aerospace companies!

The contracts are regularly extended and direct opportunities are often available.

Sr. Systems Integration Inspector

Perform all required inspections operations on mechanical, electrical and electronic parts, assemblies, tooling and software during receiving, fabrication, assembly, modification, rework, repair, installation, test and shipping in a team environment. Participate in or conduct First Article inspections of mechanical, electrical or electronic equipment for completeness and conformance with applicable drawings and specifications. Coordinate with engineering, customers, vendors, production workers and other Quality Assurance people as required to complete given tasks. Provide technical assistance while solving problems and recommend corrective action to be taken to prevent recurrence of rejections. Shift assigned will be based on bargaining unit agreements.

The Strategic Missile Defense System's (SMDS) Quality organization is seeking an experienced Quality Inspector in Huntsville, AL in the Electronic Center of Excellence.

Use and interpret DoD, NASA and blueprints, specifications, directives, documents, manuals, inspection plans and other similar information pertaining to Quality Assurance.
Set up and operate measuring instruments and equipment necessary to accomplish work assignments.
Follow inspection and statistical sampling procedures to accept or reject materials and adjust inspection levels.
Interpret statistical process control charts and coordinate corrective actions and adjustments with quality engineering.
Move materials from place to place within the work area. This material can include not only parts, sub-assemblies and assemblies, but also tools, jigs, equipment, documentation, and other supplies as necessary for inspection and or assembly/test of products. This may include the packaging or unpackaging of raw material and/or finished products.
Setup equipment and perform tests on various products and assemblies using manual, semi-automatic, or automated test devices.
Witness, evaluate, certify and record certification testing data and maintain personal certifications as work requires.
Inspect incoming and outgoing shipments for proper identification, quantity, damage, packaging, paperwork, shipping instructions, and perform appropriate dimensional, composition, non-destructive, destructive and inspection.
Review recurring discrepancies to ascertain cause and corrections required.
Review completed inspection records to assure compliance with pertinent written directives and other program direction.
Conduct internal reviews to assure compliance with the Quality Manual and other procedures such as Quality Instructions, Sampling Plans and Operating Procedures.
Prepare and edit reports for approval by supervision.
Assist Manufacturing QA Manager in continuous process improvement efforts.
Maintain work area in a clean and orderly condition.
Maintain licenses, permits and certifications required to perform assigned work.
Perform other duties as assigned within general job classification.

Basic Qualifications

Minimum 3 years of experience working with circuit card and/or electronics manufacturing
Experience working to J-STD with Space Addendum
High School Diploma or GED

Preferred Qualifications:

More than 3 years of experience performing dimensional, composition, non-destructive, destructive and/or inspections.
Experience with gathering data and performing a Root Cause Corrective Action (RCCA).
Additional Skills:
Candidate must work 100% onsite; no remote option
*No clearances required
Must be available to work any of the following shifts:
2nd shift: 2-10:30pm, 3-11:30pm or 3rd shift 10:30am-5:30pm

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a 401K offering. In some states and on some openings there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2130-2133-11534
Job Location: Huntsville AL
Per Diem: --
Overtime: --
Start Date: 2022-02-07
Input Date: 01/04/2022
Last Updated: 09/27/2023
Firm Name: STRUCTURES COMPANY LLC
Attention: Tania Martinez
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Recruiter - Manufacturing

Description:

If you are looking for a challenging opportunity that will ignite your passion for designing cool and innovative products, are exceptionally creative, are a great problem solver and can make things happen - apply today!


Main Purpose:

As the Technical Recruiter, you will be responsible for engaging in direct and indirect recruiting strategies to increase company exposure, branding, and reputation. In addition, we need you to conduct deep internet mining for passive candidates and make sound judgments on talent and exercise discretion in making independent decisions. As our Technical Recruiter you will be responsible for sourcing, identifying, qualifying, interviewing, and presenting candidates to hiring managers. You will also be responsible for recruiting at all levels of talent spanning multiple skills, with strong focus on professional and exempt level positions. You will work independently on multiple projects with a strong ability to effectively prioritize and produce results within set timelines.

Your Mission

Work with hiring managers to accurately define position duties and requirements, developing clear job descriptions and effective job postings. Identify likely ways to effectively source candidates for difficult to fill positions.
Aggressively recruit well-qualified applicants from a variety of sources including cold calling, sourcing from various Job Boards, User Groups, networking, electronic advertising and occasional career fairs. Assist hiring managers to identify and implement effective pre-screening techniques for each position. As appropriate, coordinate phone interviews, testing, practical assessments, on-site interviews and any required travel.
Conduct in-depth telephone assessments of candidates using comprehensive behavioural interviewing and work history reviews
Lead interviewer debrief sessions and provide recommendations on hiring.
Sell the company's value proposition to candidates and successfully negotiate offers and relocation packages.
Support relocation, on-boarding and post-hire follow-up for new hires, including developing effective resources and materials.
Identify, initiate and/or participate in various efforts to continuously improve the staffing life cycle.
Participate in recruitment strategy sessions to discuss best practices in sourcing, recruiting tools, market trends and improve workflow efficiency.
Generate recruitment activity reports and drive regular status meetings with hiring teams.

What you bring

A minimum of 2 years of heavy recruiting experience, ideally in aerospace, a start-up organization or a highly unique cultural environment.
Possess an established track record of developing strong relationships with potential employees.
Able to accurately vet technical resumes and conduct in depth technical interviews.
Experience at providing consultative recommendations and influencing hiring teams.
Fearless networker and cold caller with an understanding of how to build and track candidates.
Excellent verbal and written communication skills, and effective communication in formal and informal settings with senior executives, peers and candidates.
Excellent negotiator with a confidence-inspiring manner, and a keen sense of determination and urgency. Have a strong customer focus when dealing with both hiring managers and candidates.

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2303-2295-11534
Job Location: Remote
Per Diem: --
Overtime: --
Start Date: 2022-02-25
Input Date: 11/05/2021
Last Updated: 01/25/2023
Firm Name: STRUCTURES COMPANY LLC
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Engineer II (Contract)

Description:
Do you have an eye for detail and enjoy working with amazing products and tools? Join us in championing and protecting explorers and heroes!
    As a Test Engineer, you will be using your skills and expertise to simulate, test, certify and improve cutting edge products and services. These cover a very wide range from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. You'll develop complex test plans and procedures for a variety of systems to ensure the verification and validation of all product requirements. You will also be involved with the execution of the tests using top industry tools. As a cross functional engineer, you'll test system and component level new products and develop new test processes throughout the product lifecycle.

Must-haves:

    Bachelor's of Science degree in Engineering or other related discipline and typically 3 or more years of experience

    Conceptual knowledge of engineering principles and practices

    Familiarity working in multi-disciplinary design and development teams

    Knowledge of requirements management, system design, and systems integration

    Exposure to planning, conducting and documenting Verification and Validation (V&V) activities

Preferred:

    Experience with various testing equipment, standards, and methodologies to include manual and automated testing

    Ability to prepare complex and professional test plans, test procedures, and test reports in order to demonstrate compliance to system requirements

    Familiarity with Product and Quality Assurance principles and experienced in generation and disposition of product non-conformances

    Experience performing certification testing for various certification organizations (i.e. FAA, NASA, DoD)

    Ability to read schematics, use service manuals, follow test procedures, and use logical trouble shooting techniques

    Background in the Aerospace and Defense Industry

IMPORTANT NOTICE:

To conform to U.S. Government international trade regulations, applicant must be a U.S. Citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State or U.S. Department of Commerce.

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2432-2420-11534
Job Location: Louisville CO
Per Diem: --
Overtime: --
Start Date: 2022-02-23
Input Date: 11/25/2021
Last Updated: 11/28/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Corey Halliday
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Engineer II (Contract)

Description:
Do you have an eye for detail and enjoy working with amazing products and tools? Join us in championing and protecting explorers and heroes!
    As a Test Engineer, you will be using your skills and expertise to simulate, test, certify and improve cutting edge products and services. These cover a very wide range from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. You'll develop complex test plans and procedures for a variety of systems to ensure the verification and validation of all product requirements. You will also be involved with the execution of the tests using top industry tools. As a cross functional engineer, you'll test system and component level new products and develop new test processes throughout the product lifecycle.

Must-haves:

    Bachelor's of Science degree in Engineering or other related discipline and typically 3 or more years of experience

    Conceptual knowledge of engineering principles and practices

    Familiarity working in multi-disciplinary design and development teams

    Knowledge of requirements management, system design, and systems integration

    Exposure to planning, conducting and documenting Verification and Validation (V&V) activities

Preferred:

    Experience with various testing equipment, standards, and methodologies to include manual and automated testing

    Ability to prepare complex and professional test plans, test procedures, and test reports in order to demonstrate compliance to system requirements

    Familiarity with Product and Quality Assurance principles and experienced in generation and disposition of product non-conformances

    Experience performing certification testing for various certification organizations (i.e. FAA, NASA, DoD)

    Ability to read schematics, use service manuals, follow test procedures, and use logical trouble shooting techniques

    Background in the Aerospace and Defense Industry

IMPORTANT NOTICE:

To conform to U.S. Government international trade regulations, applicant must be a U.S. Citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State or U.S. Department of Commerce.

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2434-2422-11534
Job Location: Louisville CO
Per Diem: --
Overtime: --
Start Date: 2022-01-26
Input Date: 11/25/2021
Last Updated: 01/25/2023
Firm Name: STRUCTURES COMPANY LLC
Attention: Corey Halliday
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Engineer III (Contract)

Description:
Do you have an eye for detail and enjoy working with amazing products and tools? Join us in championing and protecting explorers and heroes!
    As a Test Engineer, you will be using your skills and expertise to simulate, test, certify and improve cutting edge products and services. These cover a very wide range from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. You'll develop complex test plans and procedures for a variety of systems to ensure the verification and validation of all product requirements. You will also be involved with the execution of the tests using top industry tools. As a cross functional engineer, you'll test system and component level new products and develop new test processes throughout the product lifecycle.

Must-haves:

    Bachelor's of Science degree in Engineering or other related discipline and typically 5 or more years of experience

    Knowledge of engineering principles and practices

    Experience working in multi-disciplinary design and development teams

    Knowledge of requirements management, system design, and systems integration

    Experience with planning, conducting and documenting Verification and Validation (V&V) activities

Preferred:

    Experience with various testing equipment, standards, and methodologies to include manual and automated testing

    Ability to prepare complex and professional test plans, test procedures, and test reports in order to demonstrate compliance to system requirements

    Familiarity with Product and Quality Assurance principles and experienced in generation and disposition of product non-conformances

    Experience performing certification testing for various certification organizations (i.e. FAA, NASA, DoD)

    Ability to read schematics, use service manuals, follow test procedures, and use logical trouble shooting techniques

    Background in the Aerospace and Defense Industry

IMPORTANT NOTICE:

To conform to U.S. Government international trade regulations, applicant must be a U.S. Citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State or U.S. Department of Commerce.

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2431-2419-11534
Job Location: Louisville CO
Per Diem: --
Overtime: --
Start Date: 2022-05-16
Input Date: 11/25/2021
Last Updated: 01/25/2023
Firm Name: STRUCTURES COMPANY LLC
Attention: Corey Halliday
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Engineer III (Contract)

Description:
Do you have an eye for detail and enjoy working with amazing products and tools? Join us in championing and protecting explorers and heroes!
    As a Test Engineer, you will be using your skills and expertise to simulate, test, certify and improve cutting edge products and services. These cover a very wide range from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. You'll develop complex test plans and procedures for a variety of systems to ensure the verification and validation of all product requirements. You will also be involved with the execution of the tests using top industry tools. As a cross functional engineer, you'll test system and component level new products and develop new test processes throughout the product lifecycle.

Must-haves:

    Bachelor's of Science degree in Engineering or other related discipline and typically 5 or more years of experience Knowledge of engineering principles and practices Experience working in multi-disciplinary design and development teams Knowledge of requirements management, system design, and systems integration Experience with planning, conducting and documenting Verification and Validation (V&V) activities

Preferred:

    Experience with various testing equipment, standards, and methodologies to include manual and automated testing Ability to prepare complex and professional test plans, test procedures, and test reports in order to demonstrate compliance to system requirements Familiarity with Product and Quality Assurance principles and experienced in generation and disposition of product non-conformances Experience performing certification testing for various certification organizations (i.e. FAA, NASA, DoD) Ability to read schematics, use service manuals, follow test procedures, and use logical trouble shooting techniques Background in the Aerospace and Defense Industry

IMPORTANT NOTICE:

To conform to U.S. Government international trade regulations, applicant must be a U.S. Citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State or U.S. Department of Commerce.

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2430-2418-11534
Job Location: Louisville CO
Per Diem: --
Overtime: --
Start Date: 2022-05-16
Input Date: 11/25/2021
Last Updated: 01/17/2023
Firm Name: STRUCTURES COMPANY LLC
Attention: Corey Halliday
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Equipment Software Engineer

Description:
A Test Equipment Software Engineer job in Grand Rapids, MI is currently available at Belcan. This is a full-time direct position with benefits. To be considered, you will need a Bachelor's Degree in Computer Science, Computer Engineering, Electrical Engineering or a similar discipline. In this job, you will support full life cycle software development for applications controlling avionics test equipment.
 
Software Engineer job duties include:
· Develop test equipment software used to test avionics systems in manufacturing and engineering environments.
· Complete entire software development life cycle for software applications, including requirements, design, code, and verification
· Use the latest emerging technologies and tools to solve complex engineering problems, working alongside product domain experts and technical professionals
· Author test software scripts and code using test equipment software integrated development environments.
· Analyze existing software to develop and evaluate solutions to problem reports.

Job Qualifications:
· BS degree in Computer Science, Computer Engineering, Electrical Engineering or a similar discipline
· Engineers who do well in this role are experienced with the architecture of complex test systems used to test electronic Line Replaceable Units (LRU).
· Demonstrated experience developing software running on test equipment computers.

Desired Skills:
· Experience programming applications using National Instruments LabWindows/CVI is required. The ideal candidate would have experience with both current and legacy versions of LabWindows/CVI.
· Experience developing test scripts using National Instruments TestStand is required.
· Knowledge of aircraft systems or other safety critical systems is important.
· Experience writing software requirements and software design documentation is important.
 
If you are interested in this Test Equipment Software Engineer job in Grand Rapids, MI, please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.
 
Belcan is an equal opportunity employer. EOE/M/F/D/V
Build a challenging and rewarding career with an industry leader!
http://belcan.com/

 
Job Number: 317638
Job Location: Grand Rapids, MI
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 10/28/2021
Last Updated: 06/06/2022
Firm Name: BELCAN TECHSERVICES
Attention: SumitDas
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Technician- JOB ID 49420

Description:
We have an Excellent Contract position for a Test Technician to join a leading Company located in the Orlando, FL area.

Tests function and response of electrical and electro-mechanical launch vehicle and ground support components and subassemblies as specified in process and design documentation. Connects and disconnects cables to hardware to be tested. Uses hand tools, multimeters, oscilloscopes, function generators, and specialized environmental test equipment (vibe tables, altitude, and thermal chambers, etc). Records test data in written and electronic formats.

May be called upon to travel in support of test activities. Supports manufacturing, engineering, and quality personnel in the development of procedures and troubleshooting of hardware and test equipment.

Job Responsibilities:
Testing electrical components and subassemblies
Environmental testing to support acceptance or qualification testing
Troubleshooting with associated documentation

Basic Hiring Criteria:
High School Diploma or equivalent
Knowledge of electrical and mechanical hardware
Experience with electrical and environmental test equipment
Ability to read and interpret procedures, wiring diagrams, and electrical and mechanical drawings
Basic computer skills and a working knowledge of Microsoft Office products (Word and Excel)
5 years of related experience.

Desired Qualifications:
Associates degree or certification in electronics, quality, testing, or similar
Experience with RF hardware, measurement, and testing
Willingness to travel 10% of the time
Willingness to work varied shifts to support surge activities
Familiarity with lean processes and 5S / 6S

VEVRAA Federal Contractor / Request Priority Protected Veteran Referrals / EOE Protected Veterans/Disability
The Company will consider qualified applicants with arrest and conviction records.
To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit http://www.tadpgs.com/candidate-privacy/
 
Job Number: 49420
Job Location: Orlando, FL
Rate: 33.00
Per Diem: NO
Overtime: YES
Duration: Six Months
Start Date: ASAP
Input Date: 01/11/2022
Last Updated: 02/16/2022
Firm Name: TAD PGS INC
Attention: Dillon
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design Engineer - Level 2

Description:
Inconen is looking for a Tool Design Engineer - Level 2 for our client, a well-known Aerospace Company, in Redmond, WA.

**Candidates must be a U.S. Citizen without Dual Citizenship**
**Our client mandates that all employees and contractors must be fully vaccinated for COVID-19**

Duties:
-Under general supervision and following established policies, the Tool Engineer performs professional assignments requiring general use and application of concepts, practices, and techniques.

Typical responsibilities include:
-Acts in a coordinating capacity between tool design, manufacturing engineering and shops to resolve tool fabrication difficulties
-Assists in the establishment of project tooling and equipment requirements
-Provides advice on technical details used to develop economical and efficient type and class of project tools in order to produce acceptable parts in compliance with manufacturing specifications and standards
-Recommends changes to manufacturing specifications for simplification or improvement of tool designs
-Responsible for successful tooling based on efficiency, ease and safety of operation, ease of maintenance and cost of fabrication
-Investigates and resolves tooling problems in manufacturing areas
-Observes tool tryouts for design suitability and recommends deviations and/or tool design changes
-Prepares design and fabrication cost estimates, schedules of materials and manpower
-Assists designers with problem areas and in correcting irregularities
-Develops special tooling necessary for the fabrication, testing and material handling required to support the production of our product lines
-May assign work to and direct less senior tool engineers and designers as required.

Skills:
-Mechanical Tooling Design Experience, Electronics Tooling Design Experience, use of Unigraphics NX and PTC Creo CAD tools.
-Familiarity with special processes such as: Machining, Additive Manufacturing, Welding, Pressure Test and Vacuum, Vibration and Shock Testing, Aerospace Functional Testing.

Education:
-A Bachelor's degree in an appropriate discipline and two (2) years of directly related experience, or an equivalent combination of education and experience.
-This should consist of Mechanical Design, CAD tool usage, and drafting.
 
Job Number: 17523
Job Location: Redmond, WA
Rate: $40.00 - $45.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 12 Mos
Start Date: ASAP
Input Date: 01/27/2022
Last Updated: 02/14/2022
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool and Design Engineer 2

Description:
Chipton-Ross is seeking a Tool and Design Engineer 2 for an opening in Redmond, WA.


RESPONSIBILITIES:
Acts in a coordinating capacity between tool design, manufacturing engineering and shops to resolve tool fabrication difficulties Assists in the establishment of project tooling and equipment requirements Provides advice on technical details used to develop economical and efficient type and class of project tools in order to produce acceptable parts in compliance with manufacturing specifications and standards Recommends changes to manufacturing specifications for simplification or improvement of tool designs Responsible for successful tooling based on efficiency, ease and safety of operation, ease of maintenance and cost of fabrication

Investigates and resolves tooling problems in manufacturing areas Observes tool tryouts for design suitability and recommends deviations and/or tool design changes Prepares design and fabrication cost estimates, schedules of materials and manpower Assists designers with problem areas and in correcting irregularities Develops special tooling necessary for the fabrication, testing and material handling required to support the production of our product lines May assign work to and direct less senior tool engineers and designers as required.



REQUIREMENTS:
Mechanical Tooling Design Experience, Electronics Tooling Design Experience, use of Unigraphics NX and PTC Creo CAD tools. Familiarity with special processes such as: Machining, Additive Manufacturing, Welding, Pressure Test and Vacuum, Vibration and Shock Testing, Aerospace Functional Testing.
Keywords:
CAD
DRAFTING
ENGINEER
FABRICATION
MANUFACTURING ENGINEERING
Additional Skills:
MATERIAL HANDLING
MECHANICAL DESIGN
TOOL DESIGN
AEROSPACE
AUTO CAD
CONVEYOR
COST ESTIMATES
CREO
FUNCTIONAL TESTING
INDUSTRIAL/MANUFACTURING
MACHINING
MAINTENANCE
PTC
TOOLING
TOOLING DESIGN
UNIGRAPHICS
VACUUM
WELDING
Languages:
English
Read
Write
Speak


EDUCATION:
: A Bachelor's degree in an appropriate discipline and two (2) years of directly related experience, or an equivalent combination of education and experience. This should consist of Mechanical Design, CAD tool usage, and drafting.

SHIFT:
9/80
 
Job Number: 197058
Job Location: Redmond, WA
Rate: $DOE
Duration: 6 months
Input Date: 01/13/2022
Last Updated: 06/13/2022
Firm Name: CHIPTON ROSS
Attention: Christophor Long
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Training Device Technician 3

Description:

This is a very exciting opportunity to work with one of the world's largest aerospace companies!

The contracts are regularly extended and direct opportunities are often available.

Assists with repairs and tests, installs, configures, upgrades and assists in the modification of simulators and training components, devices, hardware and software. Performs general inspections for pre-operations, post-operations and component handling of training devices, assemblies and components. Conducts functional tests of training device systems and monitors device instrumentation and bench mounted indicators. Assists engineers in troubleshooting systems and support equipment. Troubleshoots to isolate faults and repair faulty components. Works under limited supervision. We are all innovators on a mission to connect, protect, explore and inspire. From the sea bed to outer space, you'll learn and grow, contributing to work that shapes the world. Find your future with us. Seeking an experienced Training Device Technician at the Miami Training Campus in Florida. The Training Device Technician will maintain flight simulators and associated training equipment.

Position Responsibilities:

Perform general inspections for pre-operations, post-operations and component handling of training device;
Conduct functional tests of training device systems and monitors device instrumentation and bench mounted equipment.
Assist with repair and test, install, configure, upgrade and assist in the modification of simulators and training components, devices, hardware and software;
Perform general inspections for pre-operations, post-operations and component handling of training devices, assemblies and components;
Conduct functional tests of training device systems and monitors device instrumentation and bench mounted indicators;
Assist engineers in troubleshooting systems and support equipment;
Troubleshoot to isolate faults and repair faulty components;
Work under limited supervision

Employer will not sponsor applicants for employment visa status.

Basic Qualifications (Required Skills/Experience):

Must be willing to work variable shifts, including weekends and overtime. Some positions may also be rotating shifts
5+ years' experience in the field of simulation, particularly aircrew (flight) simulators and/or trainers
5+ years' experience in testing flight critical systems via simulators and hardware-in-the-loop environment
5+ years' experience with electronic/electrical systems


Preferred Qualifications (Desired Skills/Experience):

Experience in maintaining CAE, L3, TRU, and FSI Full Flight Simulators;
Experience in assisting in the modification of simulators and training components, devices, hardware and software.
Associates Degree


Typical Education / Experience:

Education/experience typically acquired through advanced education (e.g. Associate) and typically 1 or more years' related work experience or an equivalent combination of education and experience (e.g. Bachelor, 3 years' related work experience, etc.).



This position is located in a location that does not offer relocation. Candidates must live in the immediate area or relocate at their own expense.
Additional Skills:
Skills: Education/experience typically acquired through advanced education (e.g. Associate) and typically 3 or more years' related work experience or an equivalent combination of education and experience (e.g. Bachelor+1 years' related work experience, 5 years' related work experience, etc.).

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a 401K offering. In some states and on some openings there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2658-2642-11534
Job Location: Miami FL
Per Diem: --
Overtime: --
Start Date: 2022-06-15
Input Date: 01/07/2022
Last Updated: 12/08/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Tania Martinez
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wire Design and Electrical/Electronic Installation Design

Description:
Job Description:
Develops and maintains basic cable/wire harness detail and assembly designs. Assists with engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Develops and maintains basic electrical product detail, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry, antennas).Follows documented processes, specifications and procedures that support the design and manufacture of electrical commodities. Collects data to support the development of statements of work. Assists in data gathering of supplier capabilities. Reviews functional and physical input used in the development of integrated design and system architecture. Works under close supervision.

Position Responsibilities:
o Develops and maintains cable/wire harness detail and assembly designs
o Supports analysis and design reviews
o Develops and maintains electrical product detail, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry, antennas)
o Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests)
o Follows documented processes, specifications and procedures that support the design and manufacture of electrical commodities
o Supports the development of statements of work
o Assists in the technical review of supplier capabilities to facilitate source selection
o Analyzes functional and physical input used in the development of integrated design and system architecture
o Works under general supervision

Basic Qualifications (Required Skills / Experience):
o Bachelors of Science degree or higher
o College coursework and/or work experience with computer aided design tools and systems (e.g., computer aided design / computer aided manufacturing (CAD / CAM) software)
o MS Office Suite (i.e. Word, Excel, PowerPoint) experience
Preferred Qualifications (Desired Skills / Experience):
o Mentor Graphics Capital (MGC) or Enovia experience
o CATIA V5 experience
o Experience in wire harness design, wire harness installation or equipment installation
o College coursework and/or work experience with design, production, and build processes is a PLUS
o Communicator, working in teams

Typical Education / Experience:
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically < 2 years' related work experience or an equivalent combination of technical education and experience (e.g. Master). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.
 
Job Number: 46540-1
Job Location: Ridley Park, PA
Rate: $46/hr
Per Diem: Split
Overtime: Possible
Duration: 12 months
Start Date: ASAP
Input Date: 11/01/2021
Last Updated: 03/10/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Jorge Garcia
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wire Design and Install Engr 2 - Electrical/Electronic Installation Design

Description:

This is a very exciting opportunity to work with one of the world's largest aerospace companies!

The contracts are regularly extended and direct opportunities are often available.

Description:

Wire Design & Install Engineer Level 2

Develops and maintains cable/wire harness detail and assembly designs. Supports analysis and design reviews. Develops and maintains electrical product detail, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry, antennas).Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Follows documented processes, specifications and procedures that support the design and manufacture of electrical commodities. Supports the development of statements of work. Assists in the technical review of supplier capabilities to facilitate source selection. Analyzes functional and physical input used in the development of integrated design and system architecture. Works under general supervision.

Job Description
we are all innovators on a mission to connect, protect, explore and inspire. From the seabed to outer space, you'll learn and grow, contributing to work that shapes the world. Find your future with us.
seeking a Wire Design & Install Engineer to join the Philadelphia Design Center with the focus being on collaboration with the Electrical Design Team to create electrical designs in support of various projects and programs throughout the Boeing Enterprise. This Level 2 position will physically reside in Ridley Park, PA.
Position Responsibilities

Duties will include (but are not limited to):
o Develops and maintains cable/wire harness detail and assembly designs
o Supports analysis and design reviews
o Develops and maintains electrical product detail, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry, antennas)
o Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests)
o Follows documented processes, specifications and procedures that support the design and manufacture of electrical commodities
o Supports the development of statements of work
o Assists in the technical review of supplier capabilities to facilitate source selection
o Analyzes functional and physical input used in the development of integrated design and system architecture
o Works under general supervision

Work Authorization
o This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. 120.15 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee.

Basic Qualifications (Required Skills / Experience):
o Bachelors of Science degree or higher
o CATIA V5 experience is required
o MS Office Suite (i.e. Word, Excel, PowerPoint) experience

Preferred Qualifications (Desired Skills / Experience):
o Mentor Graphics Capital (MGC) or Enovia experience
o Experience in wire harness design, wire harness installation or equipment installation
o College coursework and/or work experience with Boeing design, production, and build processes is a PLUS
o Can obtain Secret Security Clearance is preferred, but not required

Typical Education / Experience:
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 2 or more years' related work experience or an equivalent combination of technical education and experience (e.g. Master). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

Relocation:
This position will be located in Ridley Park, PA and does not offer relocation assistance. Applicants must reside locally or be willing to relocate at their own expense for the opportunity.

Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

All information provided will be checked and may be verified.
Skills:
Bachelor's degree in engineering is required
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 2 or more years' related work experience or an equivalent combination of technical education and experience (e.g. Master). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a robust 401K offering. In some cases there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2415-2403-11534
Job Location: Ridley Park PA
Per Diem: --
Overtime: --
Start Date: 2022-01-19
Input Date: 11/24/2021
Last Updated: 09/27/2023
Firm Name: STRUCTURES COMPANY LLC
Attention: Kimra Stone
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wire Design and Install Engr 3 - Electrical/Electronic Installation Design

Description:

This is a very exciting opportunity to work with one of the world's largest aerospace companies!

The contracts are regularly extended and direct opportunities are often available.

Description:

Develops and maintains electrical/mechanical product detail, assembly and installation designs for misc. electrical equipment installations (e.g., equipment racks, power panels, lights, antennas, etc.). Analyzes results and performs design reviews. Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Using design tools (CATIA V4, V5, ENOVIA, PDM, IVT) prepares documentation and incorporates design changes. Documents processes, specifications and procedures that support the design and manufacture of electrical commodities by applying company, industry and governmental standards. Participates in technical review of supplier capabilities to facilitate source selection. Analyzes functional and physical input to assure development of complete integrated design. Coordinates activities and products with internal partners and external suppliers. Should be familiar with sheet metal and machine design, basic stress analysis and material properties, electrical bonding and grounding methods.
Locations: Puget Sound area - location will be determined when offer is released.
Remote, onsite or a combination of both: Prefers to work onsite, would accommodate remote.
Ok with out of state candidate as long as they can relocate at their own expense.
Start time flexible between 6:00 am and 8:00 AM

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a robust 401K offering. In some cases there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2359-2348-11534
Job Location: Everett WA
Per Diem: --
Overtime: --
Start Date: 2022-05-02
Input Date: 11/13/2021
Last Updated: 09/07/2023
Firm Name: STRUCTURES COMPANY LLC
Attention: Kimra Stone
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wire Design and Install Engr 3 - Electrical/Electronic Installation Design

Description:

This is a very exciting opportunity to work with one of the world's largest aerospace companies!

The contracts are regularly extended and direct opportunities are often available.

Description:

Wire Design & Install Engineer Level 3-2

Develops and maintains cable/wire harness detail and assembly designs. Analyzes results and performs design reviews. Develops and maintains electrical product detail, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry, antennas).Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Documents processes, specifications and procedures that support the design and manufacture of electrical commodities. Develops basic statements of work. Participates in technical review of supplier capabilities to facilitate source selection. Analyzes functional and physical input to assure development of complete integrated design. Works under general direction.

Requirements:
- Bachelor's degree or higher in Engineering
- CATIA V5 Experience is required
MANAGERS WILL NOT CONSIDER CANDIDATES WITHOUT CATIA EXPERIENCE; INCLUDE CATIA EXPERIENCE ON RESUME

Competencies: Design / Produce Process Computer Aided Design Tools Communication Continuous Learning Customer Focus Innovation / Creativity Business Acumen Safety Awareness Quality Systems Thinking Analytical Skills (Technical) Engineering Processes Design Concepts & Techniques Engr Knowledge/Comprehension Drawings/Data Sys and Models Elec Parts/Mat/Processes Electromagnetic Interference/E Wiring/Equip Install Design
Additional Sills:
Skills:
Category
Name
Required
Level
No items to display.
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 5 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD, Master+3 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a robust 401K offering. In some cases there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2472-2458-11534
Job Location: Ridley Park PA
Per Diem: --
Overtime: --
Start Date: 2022-01-19
Input Date: 12/15/2021
Last Updated: 09/27/2023
Firm Name: STRUCTURES COMPANY LLC
Attention: Kimra Stone
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wire Design and Install Engr 3 - HOT!!

Description:

Very exciting opportunity to work with one of the world's largest aerospace companies!

The contracts are regularly extended and direct opportunities are often available.

Description:

Seeking experienced Avionics/Electrical Design and/or Lab Design & Integration engineers.

The candidate will provide engineering integration and support technical design decisions diverse projects including development of lab verification strategy and architecture, breakdown of verification requirements, lab design including equipment placement, wiring pin-to-pin, wire diagrams, lab harness design, lab harness installation, equipment installation, rack design, troubleshooting, lab automation, simulation, and verification activities for aircraft development and modifications within our Oklahoma City Program Portfolios.

Other job responsibilities may include
* Works with customers to develop and document complex avionics, electronic and electrical system requirements and design for labs.
* Analyzes and translates requirements into system architecture, hardware and software designs and interface specifications.
* Analyzes results and performs design reviews
* Develops and maintains electrical product detail, assembly and installation designs (e.g., equipment racks, power panels, cable rouing and geometry, antennas)
* Supporting programs with the overall integration, Tests and validates to ensure system designs meet operational and functional requirements.
* Analyzes functional and physical input to assure development of complete integrated design
* Monitors supplier performance to ensure system integration and compliance with requirements.
* Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle.
* Participates in technical review of supplier capabilities to facilitate source selection

Basic Qualifications (Required Skills and Experience)
Experience in wire design tools such as Mentor Capital, WIRS, CEEDS, and/or an equivalent avionics wire design system is highly desired.
Experience with requirements management software (e.g. DOORS) AND/OR Model Based Systems Engineering (MBSE) and Model Based Engineering through-out the development lifecycle.
Experience on aircraft or avionics development program(s) and in engineering labs is a plus.
Must possess good organizational, interpersonal, and problem solving skills.
Must have demonstrated a strong work ethic and sense of urgency for completing assigned work with a history of meeting commitments.
Ability to adjust priorities to multiple demands and unanticipated events.

Degree and typical experience in engineering classification: Bachelor's and 5 or more years' experience, Master's degree with 3 or more years' experience or PhD degree with experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study in engineering. ABET in electrical engineering is the preferred, although not required, accreditation standard.

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a robust 401K offering. In some cases there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2243-2240-11534
Job Location: Oklahoma City OK
Per Diem: --
Overtime: --
Start Date: 2022-01-11
Input Date: 11/04/2021
Last Updated: 09/27/2023
Firm Name: STRUCTURES COMPANY LLC
Attention: Kimra Stone
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wire Design and Install Engr 4 - HOT!!!

Description:

Very exciting opportunity to work with one of the world's largest aerospace companies!

The contracts are regularly extended and direct opportunities are often available.

Description:

Avionics/Electrical Design and/or Lab Design & Integration engineers.

The candidate will provide engineering integration and support technical design decisions for diverse projects including development of aircraft design and lab verification strategy and architecture, breakdown of verification requirements, design including equipment placement, wiring pin-to-pin, wire diagrams, lab harness design, lab harness installation, equipment installation, rack design, troubleshooting, lab automation, simulation, and verification activities for aircraft development and modifications within our Portfolios.

Other job responsibilities may include
Works with customers to develop and document complex avionics, electronic and electrical system requirements and design for labs.
Analyzes and translates requirements into system architecture, hardware and software designs and interface specifications.
Analyzes results and performs design reviews
Develops and maintains electrical product detail, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry, antennas)
Supporting programs with the overall integration, Tests and validates to ensure system designs meet operational and functional requirements.
Analyzes functional and physical input to assure development of complete integrated design
Monitors supplier performance to ensure system integration and compliance with requirements.
Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle.
Participates in technical review of supplier capabilities to facilitate source selectio


Basic Qualifications (Required Skills and Experience)
Experience in wire design tools such as Mentor Capital, WIRS, CEEDS, and/or an equivalent avionics wire design system is highly desired.
Experience with requirements management software (e.g. DOORS) AND/OR Model Based Systems Engineering (MBSE) and Model Based Engineering through-out the development lifecycle.
Experience on aircraft or avionics development program(s) and in engineering labs is a plus.
Must possess good organizational, interpersonal, and problem solving skills.
Must have demonstrated a strong work ethic and sense of urgency for completing assigned work with a history of meeting commitments.
Ability to adjust priorities to multiple demands and unanticipated events.
Highly motivated and must work well in a team environment.
The ability to communicate effectively, both verbally and in writing.

Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, Master's degree with 7 or more years' experience or PhD degree with experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering. ABET in electrical engineering is the preferred, although not required, accreditation standard.

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a robust 401K offering. In some cases there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2244-2241-11534
Job Location: Oklahoma City OK
Per Diem: --
Overtime: --
Start Date: 2022-01-11
Input Date: 11/04/2021
Last Updated: 09/27/2023
Firm Name: STRUCTURES COMPANY LLC
Attention: Kimra Stone
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wire Design and Install Engr 4 - Electrical/Electronic Installation Design

Description:

This is a very exciting opportunity to work with one of the world's largest aerospace companies!

The contracts are regularly extended and direct opportunities are often available.

Description:

Develops and maintains electrical/mechanical product detail, assembly and installation designs for misc. electrical equipment installations (e.g., equipment racks, power panels, lights, antennas, etc.). Analyzes results and performs design reviews. Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Using design tools (CATIA V4, V5, ENOVIA, PDM, IVT) prepares documentation and incorporates design changes. Documents processes, specifications and procedures that support the design and manufacture of electrical commodities by applying company, industry and governmental standards. Participates in technical review of supplier capabilities to facilitate source selection. Analyzes functional and physical input to assure development of complete integrated design. Coordinates activities and products with internal partners and external suppliers. Should be familiar with sheet metal and machine design, basic stress analysis and material properties, electrical bonding and grounding methods.
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience. Previous Boeing experience is a plus.

SKILLS:
Computer Aided Design tools (CATIA V4, V5, ENOVIA, PDM, IVT)
Drawings/Data Sys and Models
Elec Parts/Mat/Processes
Engr Knowledge/Comprehension
Wiring/Equip Install Design
Works independently with minimal direction required
Locations: Puget Sound area - location will be determined when offer is released.
Remote, onsite or a combination of both: Prefers to work onsite, would accommodate remote.
Ok with out of state candidate as long as they can relocate at their own expense.
Start time flexible between 6:00 am and 8:00 AM

The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.

We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.

We have a national medical, dental and vision plan with United Healthcare and we also have a robust 401K offering. In some cases there is bonus potential, sick pay and holiday pay for those who qualify.

The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)

The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)


 
Job Number: JPC - 2360-2349-11534
Job Location: Everett WA
Per Diem: --
Overtime: --
Start Date: 2022-05-02
Input Date: 11/13/2021
Last Updated: 09/07/2023
Firm Name: STRUCTURES COMPANY LLC
Attention: Kimra Stone
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Back to Advanced Job Search