Job Search Results

190 listings were found that matched your search words: Keywords: CAD ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2018/07/19 Thursday 08:23AM Pacific Time by ContractJobHunter. )

Listings 1 - 190

Go To My Job Tracker

Expand all descriptions

CAD Systems Administrator or CAD Technical Support

Description:

 
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: kpotter@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CMM Technician

Description:
Responsibilities:

• Candidate will be responsible to work in a cross functional environment utilizing PC-DMIS programming skills as applied to an Articulating Romer ARM and DCC CMM's.
• Candidate will also be responsible to perform precision inspection verifications on mechanical parts, components, assemblies and materials. May include but is not limited to first article parts, in-process and final inspection on assemblies, and materials for workmanship and conformance to specifications / drawings.
• Candidate will utilize inspection equipment such as micrometers, gauge blocks, dial indicators, height gauges, optical comparators, profilometers, and CMM’s.
• Approves or rejects items and documents inspection results as required. Communicates with internal customers as required to resolve inspection, engineering and manufacturing challenges.

Basic Qualifications:

• High School Diploma or GED.
• Minimum 5 years of in-process and final inspection experience.
• Must have PC-DMIS experience using direct CAD models.
• Minimum 3 years recent CMM inspection.
Preferred Skills and Experience:
• ISO 9001 / AS9100 experience a plus.
• Romer Arm experience is preferred but it is not required with sufficient PC-DMIS skills.
• Understanding of process control experience is a plus.
• AA Degree is preferred.
• Must be open to working any of the following shifts:1st Shift (A) – Su, M, T, W, Th – 5:00am – 3:30pm; 1st Shift (B) – T, W, Th, F, Sa – 5:00a - 3:30pm; 1st Shift (W) – F, Sa, Su, M – 3:00am – 3:30pm; 2nd Shift (A) – Su, M, T, W, Th – 3:30pm – 2:00am; 2nd Shift (B) – T, W, Th, F, Sa 3:30pm – 2:00am; 2nd Shift (W) – F, Sa, Su, M – 3:00pm – 3:30am with overtime as necessary.

Additional Requirements:
• Requires the ability to read and interpret engineering drawings and specification using ASME Y14.5.
• Experience with GD&T and skillful use of metrology tools and gages required.
• Experience with Microsoft applications including Word and Excel.
• Be able to lift a minimum of 25lbs on occasions.
• Stand, walk, push, pulls, reach overhead, and bend to the floor.
ITAR Requirements:
To conform to U.S. Government space technology export regulations, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.
 
Job Location: Hawthrone, CA
Start Date: ASAP
Input Date: 10/07/2016
Last Updated: 03/01/2017
Firm Name: JOHNSON SERVICE GROUP
Attention: Sidney Williams
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Programmer (NX)

Description:
Responsibilities:
�Strong GD&T understanding
�Provide programming writing/support for various CNC turning, and 3, 4, and 5 axis milling operations.
�Manufacturing process planning from forging/casting to completion.
�Fixture and Tooling design.
�Ability to determine hours of machining operations from blueprints for quoting purposes.
�Ability to create solid models in Unigraphics or similar CAD/CAM software listed below.
�Daily interface with all manufacturing and quality functions.
�Interface with customers and suppliers to resolve process and design issues.
�Understand and ability to incorporate lean manufacturing in cell environment.
�Other Engineering/Programming related duties as assigned by management.

Requirements:
�5 years direct CNC machining/programming experience with multi-axis machines, milling equipment, and lathes.
�A BS in Engineering, Manufacturing, Engineering Technology or similar technical degree preferred but not required.
�Strong knowledge of Unigraphics (NX7) and/or Surfcam. Willingness to train in either language as required.
�Ability to interpret complex blueprints, define cutting tools and prepare a machining programs and tool sheets.
�Experience in the following alloy groups; steel, titanium, stainless, nickel alloy, and aluminum.
�Successful experience in CNC programming large parts 24� in diameter through 120� using good machine shop practices in the Aerospace or Power Generation Industry preferred.
�Experience leading and solving problems to improve business processes.
�Excellent written and oral communication skills.
�Must be a team player and have the ability to work in a cross functional environment.
 
Job Number: 36146
Job Location: CT
Rate: Direct Hire
Per Diem: split
Overtime: possible
Duration: C2P
Start Date: asap
Input Date: 02/23/2017
Last Updated: 02/24/2017
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Erica Price
Address: WESTRIDGE OFFICE PARK
2646 HIGHWAY 109 STE 207

City, State: WILDWOOD, MO 63040
Phone: 636/438-0312
800 Phone: 866/277-3343
Fax Phone: 636/220-8284
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CREO CAD Designer I/II

Description:
CREO CAD Designer I/II

Location: Jupiter, FL
Rate: $28.00 - $33.00/HR
6 month contract


** Candidates must be U.S. Citizens **
** Permanent residents are not eligible for this role **
** Dual citizens are not eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are not acceptable **

Duties:
** Looking for entry level candidates. 2 year degree with 1 to 2 years of experience. Or a 4 year degree. Experience in CAD or similar tools required (Creo and/or NX tools a plus but not required) **

- Provide design support to engineers on technical projects and/or products, maintaining, organizing, compiling, and manipulating technical data.
- Prepares NX CAD models and associative engineering drawings (product definition) using Windchill PLM System version 10.
- Investigates and makes recommendations for design factors such as ease of manufacture, inspectability, availability of materials and equipment, strength-weight efficiency, contractual specification requirements and cost requirements.
- Performs mathematical calculations and tolerance analysis per engineering specifications.
- Recommends alternative design solutions to problems and obstacles.
- Checks engineering product definition for compliance and conformity to established standards, specifications, and design directives; and may prepare contractually required data submission.


RESPONSIBILITIES:
- Under general supervision and following established policies, the designer performs professional assignments requiring complete working knowledge of application of concepts, practices, and techniques.
- Prepares and maintains NX CAD drawings and models of moderate complexity within Windchill PLM System version 10. Capable of managing moderate CAD assemblies and engineering BOM.
- Performs varied technical and research duties in of engineering designs and product definition valuates, selects, and applies engineering techniques, procedures, and criterion making product adaptations and modifications applying experience and judgment.
- Performs assignments that typically have specified objectives and require investigation of a limited number of variables.
- Selects applicable analytical data from previous products, determines the technical principles involved, mathematically defines the problem and computes the engineering characteristics consistent with the specifications, design needs, and requirements of other portions of the product.
- Interacts with own and related teams. May represent the organization on externally.
- May perform tolerance studies and contribute to design modifications
- May provide work leadership to lesser experienced staff


Education:
- Position requires an Associate's degree in an appropriate discipline.
 
Job Number: 6877
Job Location: Jupiter, FL
Rate: $28.00 - $33.00/HR
Per Diem: Split
Overtime: Possible
Duration: 6 mos
Input Date: 12/28/2016
Last Updated: 01/17/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Chassis Packaging Support – NX CAD

Description:
• Create and Maintain chassis packaging and arrangement for our client that is supporting a heavy truck manufacturer in Portland Oregon.
• You'll be working with our client that is the Original Equipment Manufacture OEM of suspensions and other components the engineer and develop for Oregon base truck manufacturer..
• You'll be working with OEM and the truck manufacture in making sure that the current components of NX 3D models are up to date in the database.
• You will be downloading NX 3D Cad models and importing them.
• You must have solid NX CAD capabilities to move and save parts, sub-assemblies and assemblies in the correct configurations and arrangements for clearance studies and other needs truck manufacturer may need. There is no engineering or design involved but the parts need to be correctly located in 3D space to verify wheel, chassis and packaging clearance studies and so on.
 
Job Number: 2841
Job Location: Portland, ORE
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 3 – 6 Months (Likely to get extended)
Start Date: ASAP
Input Date: 01/05/2017
Firm Name: OLSA RESOURCES INC
Attention: Sarabjit Saxena
Address: 3836 N BALLAST ST
City, State: PORTLAND, OR 97217
Phone: 503/608-7895
Fax Phone: 503/608-7896
Website: www.olsaresources.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract - Manufacturing Engineer II

Description:
Unique Skills:

SAP, Solumina, Electrical systems knowledge


Education and Experience Requirements:
Bachelors degree in Mechanical, Manufacturing Engineering or related curriculum, or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Three (3) years Manufacturing Engineering, planning, or related technical experience.


Position Purpose:

Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning).

Principal Duties and Responsibilities:

Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 9. Utilize CADAM/CATIA data and nesting software to generate flat patterns, Master Models, NC data, and ply nests to meet Engineering and Manufacturing requirements. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. 3. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 88302
Job Location: Pooler, GA
Overtime: Possible
Start Date: ASAP
Input Date: 01/10/2017
Firm Name: INTERGEN GROUP
Attention: Cort Hayes
Address: 5051 PEACHTREE PKWY STE 200
City, State: PEACHTREE CORNERS, GA 30092
Phone: 678/318-1816
Fax Phone: 678/493-1467
Website: www.intergengroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Creo CAD Designer I/II / entry level CREO NX FL

Description:
Job Title: CAD Designer
Job Number: 157790/5926126
Location: Jupiter, FL
Compensation: 33/hr
Assignment Length: contract


Description:

** Looking for entry level candidates. 2 year degree with 1 to 2 years of experience. Or a 4 year degree. Experience in CAD or similar tools required (Creo and/or NX tools a plus but not required) **

** Candidates must be U.S. Citizens **

** Permanent residents are not eligible for this role **

** Dual citizens are not eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are not acceptable **


• Provide design support to engineers on technical projects and/or products, maintaining, organizing, compiling, and manipulating technical data.
• Prepares NX CAD models and associative engineering drawings (product definition) using Windchill PLM System version 10.
• Investigates and makes recommendations for design factors such as ease of manufacture, inspectability, availability of materials and equipment, strength-weight efficiency, contractual specification requirements and cost requirements.
• Performs mathematical calculations and tolerance analysis per engineering specifications.
• Recommends alternative design solutions to problems and obstacles.
• Checks engineering product definition for compliance and conformity to established standards, specifications, and design directives; and may prepare contractually required data submission.
Skills: RESPONSIBILITIES
Under general supervision and following established policies, the designer performs professional assignments requiring complete working knowledge of application of concepts, practices, and techniques.

• Prepares and maintains NX CAD drawings and models of moderate complexity within Windchill PLM System version 10. Capable of managing moderate CAD assemblies and engineering BOM.
• Performs varied technical and research duties in of engineering designs and product definition valuates, selects, and applies engineering techniques, procedures, and criterion making product adaptations and modifications applying experience and judgment.
• Performs assignments that typically have specified objectives and require investigation of a limited number of variables.
• Selects applicable analytical data from previous products, determines the technical principles involved, mathematically defines the problem and computes the engineering characteristics consistent with the specifications, design needs, and requirements of other portions of the product.
• Interacts with own and related teams. May represent the organization on externally.
• May perform tolerance studies and contribute to design modifications
• May provide work leadership to lesser experienced staff
Education: • Position requires an Associate's degree in an appropriate discipline.
 
Job Number: MB-5926126
Job Location: Jupiter, FL
Rate: 33/hr max
Duration: 6 month contract
Input Date: 01/13/2017
Last Updated: 01/18/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Data Integrity

Description:
Looking for an applicant with a Bachelor's degree and at least 5 years in the following: Check 3D engineering data for conformance to Gulfstream requirements as directed. Check parts for fit, form and function to the extent that information is available. Must have experience in Product Lifecycle Management (PLM) processes and tools, including checking CATIA v5 , SmarTeam, as well as other CAD datasets, in accordance to Gulfstream requirements as directed. Checkers are responsible for determining the acceptability of data in the following areas: • Accuracy and completeness of engineering product definition data, including CAD and PDM data. • Proper application and compliance with all Engineering and customer drawing requirements. • Use and understanding of GD & T a must. • Dimensioning and tolerancing including familiarity with ASME Y14.5. • Application of best drafting and design practices and procedures. • Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts. • Advise Design personnel regarding GAC drawing and design practices and procedures. • Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams. • Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments. • Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements. • Knowledge of GAC parts list & PdocM, a plus. Essential Duties and Responsibilities • Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems. • Ensures designs meet customer criteria, quality standards and FAA requirements. • Adheres to budget and project schedules. • Provides design guidance and feedback to other engineering personnel. • Other duties as assigned. • Knowledge of industry design and documentation standards. • Experience with mechanical assemblies and manufacturing technique design. • Ability to work independently and cross-functionally. • Experience in communicating with employees/teams in productive and efficient manner. • Strong communication and problem-solving skills. Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.
PLease check out all of our openings at
www.hi-tecsolutions.com/jobs
 
Job Number: 89201
Job Location: Savannah, GA
Rate: 50-55
Per Diem: yes
Overtime: yes
Duration: LT
Start Date: asap
Input Date: 01/25/2017
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: 2501 E PIEDMONT RD STE 103
City, State: MARIETTA, GA 30062-7753
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Data Integrity Engineer (TSI)

Description:
Data Integrity Engineer (TSI)

Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Long Term contract


Unique Skills:
- Check 3D engineering data for conformance to company requirements as directed.
- Check parts for fit, form and function to the extent that information is available.
- Must have experience in Product Lifecycle Management (PLM) processes and tools, including checking CATIA V5, SmarTeam, as well as other CAD datasets, in accordance to company requirements as directed.
- Checkers are responsible for determining the acceptability of data in the following areas:
• Accuracy and completeness of engineering product definition data, including CAD and PDM data.
• Proper application and compliance with all Engineering and customer drawing requirements.
• Use and understanding of GD & T a must.
• Dimensioning and tolerancing including familiarity with ASME Y14.5.
• Application of best drafting and design practices and procedures.
• Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
• Advise Design personnel regarding company drawing and design practices and procedures.
• Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
• Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
• Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
• Knowledge of company parts list & PdocM, a plus.

Essential Duties and Responsibilities
• Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems.
• Ensures designs meet customer criteria, quality standards and FAA requirements.
• Adheres to budget and project schedules.
• Provides design guidance and feedback to other engineering personnel.
• Other duties as assigned.
• Knowledge of industry design and documentation standards.
• Experience with mechanical assemblies and manufacturing technique design.
• Ability to work independently and cross-functionally.
• Experience in communicating with employees/teams in productive and efficient manner.
• Strong communication and problem-solving skills.


Education and Experience Requirements:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.


Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principal Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 6945
Job Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Per Diem: Possible
Overtime: Possible
Duration: LT
Input Date: 02/14/2017
Last Updated: 03/28/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer 3

Description:
This position requires a strong background in Aerospace Engineering/Design with an emphasis on pneumatic, mechanical and electro-mechanical components/assemblies. The ideal candidate will have experience in the design, analysis and prototyping of pneumatic fluid control devices such as solenoid and motor operated pneumatic valves. The candidate should have a broad background including work with mechanical devices and subsystems, preferably for use in military or commercial aviation. Knowledge of airborne weapon systems and /or weapon carriage equipment is strongly desirable.

Specialist knowledge regarding the sizing of flow elements, design and operation of high pressure pneumatics, hydraulics, motor actuators and solenoids will be a strong differentiator for candidate selection. Must be flexible and able to work effectively in a fast paced environment as a member of a cross functional team and as an individual contributor.


SKILLS / REQUIREMENTS
Minimum BSME, BSAE and 7 to 10 years experience in relevant design/development environment, preferably for military or commercial aviation.

Knowledge of manufacture of mechanical components and assemblies with emphasis in complex electromechanical systems, or large structures

Knowledge of manufacturing techniques, their capabilities, strengths and weaknesses. Prior assembly or shop experience is a plus

Must have knowledge of aerospace materials properties and selection as well as processing including Heat Treat and Coatings for aerospace requirements

Must be able to perform basic measurements and simple inspection processes

Must be able to demonstrate knowledge and experience in creation of design concepts using hand sketches, and CAD tools.

CAD experience in CATIA or Pro-E a plus

Must be able to perform preliminary flow passage sizing, pressure vessel and structure stress checks and rough sizing calculations by hand. Use of FEA tools is a plus.

Must have experience with MIL-STD documents, reading and interpretation of ASME Y14.5

Must be able to write engineering reports that include analysis and results

Must have excellent verbal and written communication skills

Must be fluent in written and spoken English

Evidence of accomplishment in self-documentation of work product through technical reports, test reports etc. will be considered as a plus

Knowledge of Microsoft Office products is essential

Proof of Education is required
US Citizenship Required
 
Job Location: Inglewood, CA
Rate: Open
Per Diem: No
Overtime: No
Duration: Permanent
Start Date: Now
Input Date: 09/16/2016
Last Updated: 03/01/2017
Firm Name: JOHNSON SERVICE GROUP
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer II

Description:
Design Engineer II for an opening in Canoga Park, CA.

RESPONSIBILITIES:
Position is for a development engineer in support of development of rocket engine combustion devices hardware (injectors, combustion chambers, nozzles, ignitors). Responsibilities include design support, trade studies, hardware development, specification preparation and release, fabrication support, test planning, vendor/supplier integration and coordination.
Supports combustion devices hardware through the entire product life cycle. Analyzes and verifies product design and performance for adequacy and reliability. Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities. Interfaces with other members of project or program teams, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
Under general supervision and following established policies, performs professional engineering assignments requiring full use and application of standard engineering principles, theories, concepts and techniques. Performs work which involves conventional types of studies, investigations, structures, or equipment with relatively few complex features. Independently evaluates, selects and applies engineering techniques, procedures, and criteria using judgment in making adaptations and modifications.
Assignments typically have specified objectives and require the investigation of a limited number of variables. May make presentations to small audiences.
Selects applicable analytical data from previous products, determines the technical principles involved, mathematically defines the problem and computes the engineering characteristics consistent with the specifications, design needs, and requirements of other portions of the product. May assign work to and direct less senior engineers and support personnel as required.

Work is reviewed for soundness of technical judgment and overall adequacy and accuracy.
Erroneous decisions or recommendations, or failure to get results may cause delays in project schedules and result in the allocation of more resources. Contacts are primarily intra-organizational. May also be involved in interfacing with other organizations. Outside customer contacts would be infrequent and on routine matters.

REQUIRED EXPERIENCE:
Candidates should have hands on mechanical experience. This position will be setting up lab experiments and managing data.
General engineering/science background; Understanding and use of analytical, design or process procedures pertinent to the particular field of engineering. Knowledge of statistical methods. Ability to read and interpret blueprints, technical drawings and specifications; Ability to communicate clearly and concisely; May require the use of engineering test equipment, CAD, and/or various computer systems. Ability to operate effectively in a team environment.

EDUCATION:
Bachelors degree in an appropriate discipline/science and two years directly related experience as an associate engineer or equivalent combination of education and experience.

1st Shift, 5/40 Schedule
 
Job Number: 161344
Job Location: Canoga Park, CA
Duration: 8 Months
Start Date: ASAP
Input Date: 01/03/2017
Firm Name: CHIPTON ROSS
Attention: Debbie Aubert
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer II

Description:
Design Engineer II
Canoga Park, CA
3 Month Contract
$28-30.00/Hr

Duties:
** Candidates should have experience with Creo and GD&T **



** Windchill experience strongly preferred **



Design and Development Engineer - Must be able to specify valve type, valve trim configuration, material and seal packings for liquid rocket engine systems.

Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
Applies research to the planning design Development and testing of valves, actuators and associated hardware
Applies theories of heat and energy transfer to create practical solutions to technical problems
Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
Majority of work will be to develop and maintain valve layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.



Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.

Skills:
Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.



Engineers also required to analyze and verify product design and performance for adequacy and reliability.



Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.



Must be able to interface well with other members of project or program team. management, and technical staff to define ind implement engineering solutions to meet group, organization, and company objectives.



Must be able to prepare and make presentations at both internal and customer design reviews.

Education:
BS degree in Engineering or equivalent. MS degree is desired.



5 years of related experience as technical designer in rocket propulsion hardware and Pro/E/Creo CAD systems.
 
Job Number: 6846
Job Location: Canoga Park, CA
Rate: 28.00-30.00
Per Diem: Possible Split
Overtime: Possible
Duration: 3 Mos
Start Date: ASAP
Input Date: 12/28/2016
Last Updated: 01/17/2017
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer II / Creo and GD&T Windchill CA URGENT

Description:
Job Title: Design Engineer II
Job Number: 157943/5830011
Location: Canoga Park, CA
Compensation: 30/hr
Assignment Length: contract


Description:


Duties:
** Candidates should have experience with Creo and GD&T **



** Windchill experience strongly preferred **



Design and Development Engineer - Must be able to specify valve type, valve trim configuration, material and seal packings for liquid rocket engine systems.

Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
Applies research to the planning design Development and testing of valves, actuators and associated hardware Applies theories of heat and energy transfer to create practical solutions to technical problems Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
Majority of work will be to develop and maintain valve layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.



Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.

Skills:
Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.



Engineers also required to analyze and verify product design and performance for adequacy and reliability.



Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.



Must be able to interface well with other members of project or program team. management, and technical staff to define ind implement engineering solutions to meet group, organization, and company objectives.



Must be able to prepare and make presentations at both internal and customer design reviews.

Education:
BS degree in Engineering or equivalent. MS degree is desired.



5 years of related experience as technical designer in rocket propulsion hardware and Pro/E/Creo CAD systems.
 
Job Number: MB-5830011
Job Location: Canoga Park, CA
Rate: 30/hr max
Duration: 4 month contract
Input Date: 01/18/2017
Last Updated: 01/19/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airframe Systems Integration Zone

Description:
Airframe Systems Integration Zone

Location: Savannah, GA
Duration: Long Term Contract
Pay Rate: $60/hr - $65/hr
Shift: First

Position Purpose:
The primary objective for the Airframe Systems Integration group is to ensure designs are fully integrated between the multiple design disciplines as well as manufacturing and maintainability. Other important objectives included supporting Design for Manufacturing goals of part standardization and part count reduction and providing requirements and processes for each phase of the design process.

Essential Functions:
1. Manages Installation Design of primary aircraft barrel assemblies.
2. Coordinates integration of airframe and system installations. Holds planning and review meetings as needed. Manages and reviews schedules.
3. Manages the coordination and development of parts, planning, tooling & purchase orders.
4. Has oversight over the release of engineering documentation.
5. Responsible for interface definition & configuration control of a specific aircraft barrel section.
6. Reviews engineering and manufacturing release criteria.
7. Defines when sufficient review cycle criteria have been met. Conducts risk analysis for remaining tasks.

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements.
2. Experience in communicating with employees/teams in productive and efficient manner.
3. Ability to work independently and cross-functionally.
4. Current and up-to-date knowledge of developments in the structures/systems design disciplines 3D / MBD data requirements, as well as all interrelated disciplines of design build teams.
5. Ensures designs meet customer criteria, quality standards and FAA requirements
6. Knowledge of industry design and documentation standards.
7. Use and understanding of Dimensioning and tolerancing including familiarity with ASME Y14.5 a must.
8. Experience with mechanical assemblies and manufacturing technique design.
9. Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
10. Performs other duties as assigned
11. CATIA Knowledgeware and SmarTeam experience desirable.

Education and Experience Requirements:
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
 
Job Number: 6814
Job Location: Savannah, GA
Rate: 60-65
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/07/2017
Last Updated: 03/15/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Validation Engineering IV

Description:
OCCUPATIONAL SUMMARY
The individual is responsible for executing projects in proper direction to obtain a certified seat structure. He/she would stand as technical specialist for design validation.

DUTIES AND RESPONSIBILITIES
A. Recommend strategies for all design validation activities with respect to applicable requirements by utilizing analytical process and testing as necessary to the DV group.
B. Will scrutinize all the analyses done by design validation engineers and propose new ideas to them.
C. Implement analytical approach and help DV staff in establishing decent correlation with test data.
D. Mentor the Design Validation Engineers and mold them per department requirements.
E. Will be responsible for software license follow up and its proper implementation.
F. Responsible for planning cost effective and robust design visions with Lead design validation engineer.
G. Comply with Zodiac Seats procedures (QAP) and certification internal procedures.
H. Responsible for analyzing weight saving structure and building tested material data base used for finite element models
I. Will be responsible for building PSM (Prescribe structure models) models.
J. Will actively work on inflatables and airbag projects.
K. Responsible for developing new ideas to control HIC (head injury criteria).
L. Provides status and schedule updates to department head and other appropriate entities on a regular basis.
M. Responsible for answering design related questions pertaining to failure of composites and seat structure.
N. Will be working simultaneously with test lab manager to obtain useful test data.
O. Advising Leads/Manager/Directors for new processes

QUALIFICATION REQUIREMENTS
KNOWLEDGE AND SKILLS
1. Must have strong background for finite element modeling tools and solvers.
2. Must have strong understanding of dynamic test modes conducted at ZSUS per FAA requirements.
3. Must have vast knowledge of airbags and occupant restraint systems along with seat structure.
4. Familiarity of FMVSS/consumers requirement is preferred but not mandatory.
5. Must have excellent knowledge of ATDs (Anthropomorhic test dummy) hardware and model.
6. Minimum of 6-8 years FEA experience using LS-Dyna, Altair HyperWorks suite.
Experience with solvers like Madymo, ABAQUS, PAMCRASH, NASTRAN is preferred.
7. Must have strong unix/linux or window based system knowledge.
8. Knowledge of composites is required.
9. Must have strong mechanical aptitude.
10. Must be detail oriented and have sound engineering judgment.
11. Must be self-motivated and a self-starter.
12. Good knowledge of Radioss, Primer, ESI-visual is preferred.
13. Must be able to communicate efficiently in writing and verbally.
14. Must be able to operate standard office equipment.
15. Must be able to generate documents such as, plans, data sheets and reports.
16. Must have ability to analyze CAD drawings.
17. Must have dynamic and static testing experience.
18. Basic Pro/E/CATIA skill is preferred.
19. Familiarity with FAA regulations, Boeing/Airbus specifications is preferred.
20. Must be able to communicate well with internal departments, customers, and regulatory agencies.
21. Must be presentable and write technical presentations

EDUCATION AND/OR EXPERIENCE
Must have a M.S. in Mechanical or Aerospace Engineering with 6-8 yr. of FEA related experience.
LS Dyna experience, minimum of 6 years required.
Supervisory experience preferred but not required.


COMMUNICATION SKILLS
Must have the ability to generate written communication and to operate required office equipment. Ability to read and review written communication. Speech and hearing abilities that allow individual to communicate clearly and distinctly in English.

REASONING ABILITY
Ability to solve problems and think strategically

PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential function of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is required to sit for long periods of time while working with computers and viewing computer monitors, and other office equipment alternated with periods of standing and walking. This position also requires extensive walking/standing to participate in activities on the shop floor. Time period may vary from day to day. Finger dexterity needed in using misc. office equipment such as telephone, typing, ten key, fax, copy machine etc. Bending, stooping, reaching and lifting up to approximately twenty pounds are required during tasks related to the job.

Listed above are the ESSENTIAL FUNCTIONS of this job classification. Employees in this job classification may be required to perform various other duties including but not limited to training, administration, and housekeeping. In addition, employees in this job classification are responsible for the quality, quantity and timeliness of the product or service they provide. They will carry out those duties, in a safe and cooperative manner, per established policies, practices and procedures. Management reserves the right to add, modify, change or rescind the work assignments of different positions and to make reasonable accommodations so that qualified employees can perform the essential functions of the job. Management reserves the right to waiver qualification requirements when experience levels are exceptional.
 
Job Number: 16-609-7432
Job Location: South-central
Rate: $70K to $90K
Per Diem: No
Overtime: Possible
Duration: DIRECT
Start Date: ASAP
Input Date: 03/20/2017
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engine System Design Engineer II

Description:
Engine System Design Engineer II
Canoga Park, CA
1 Year Contract
$23-27.00/Hr


Duties: ** Candidates must be U.S. Citizens **

• Performs entry level design engineering duties for liquid rocket engine systems.
• Primary duties include working within an Integrated Product Team (IPT) environment to design/revise engine system components utilizing 3D CAD software, coordinating analysis support, and releasing drawings/models.
• Additional duties may include in-house/vendor fabrication and test support as needed.

Skills:
• 3D CAD experience required.
• CREO2 is a plus, but not mandatory.

Education:
• Engineering degree required.
 
Job Number: 6895
Job Location: Canoga Park, CA
Rate: 23.00-27.00
Per Diem: Possible Split
Overtime: Possible
Duration: 1 Year
Start Date: ASAP
Input Date: 01/31/2017
Last Updated: 02/16/2017
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engine System Design Engineer II / entry level design engineering duties for liquid rocket engine systems CA URGENT

Description:
Job Title: Engine System Design Engineer II
Job Number: 158170/5832775
Location: Canoga Park, CA
Compensation: 32/hr
Assignment Length: 11 month contract
** Candidates must be U.S. Citizens **
Description:

Performs entry level design engineering duties for liquid rocket engine systems.
Primary duties include working within an Integrated Product Team (IPT) environment to design/revise engine system components utilizing 3D CAD software, coordinating analysis support, and releasing drawings/models.
Additional duties may include in-house/vendor fabrication and test support as needed.
Skills:
3D CAD experience required.
CREO2 is a plus, but not mandatory.
Education:
Engineering degree required.
 
Job Number: MB-5832775
Job Location: Canoga Park, CA
Rate: 32/hr max
Duration: 12 month contract
Input Date: 02/10/2017
Last Updated: 02/14/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer II

Description:
Engineer II

Location: Canoga Park, CA
Rate: $50.00 - $55.00/HR
6 month contract


** This is not a Project Engineer role. Looking for candidates who have hands on mechanical experience. This position will be setting up lab experiments and managing data **
** Candidates must be U.S. Citizens **
** Permanent residents are not eligible for this role **
** Dual citizens are not eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are not acceptable **


Duties:
- Position is for a development engineer in support of development of rocket engine combustion devices hardware (injectors, combustion chambers, nozzles, igniters).
- Responsibilities include design support, trade studies, hardware development, specification preparation and release, fabrication support, test planning, vendor/supplier integration and coordination.
- Supports combustion devices hardware through the entire product life cycle.
- Analyzes and verifies product design and performance for adequacy and reliability.
- Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.
- Interfaces with other members of project or program teams, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
- Under general supervision and following established policies, performs professional engineering assignments requiring full use and application of standard engineering principles, theories, concepts and techniques.

Typical responsibilities include:
- Performs work which involves conventional types of studies, investigations, structures, or equipment with relatively few complex features.
- Independently evaluates, selects and applies engineering techniques, procedures, and criteria using judgment in making adaptations and modifications.
- Assignments typically have specified objectives and require the investigation of a limited number of variables.
- May make presentations to small audiences.
- Selects applicable analytical data from previous products, determines the technical principles involved, mathematically defines the problem and computes the engineering characteristics consistent with the specifications, design needs, and requirements of other portions of the product.
- May assign work to and direct less senior engineers and support personnel as required.
- Work is reviewed for soundness of technical judgment and overall adequacy and accuracy.
- Erroneous decisions or recommendations, or failure to get results may cause delays in project schedules and result in the allocation of more resources. Contacts are primarily intra-organizational.
- May also be involved in interfacing with other organizations. Outside customer contacts would be infrequent and on routine matters.

Skills:
- General engineering/science background; Understanding and use of analytical, design or process procedures pertinent to the particular field of engineering.
- Knowledge of statistical methods.
- Ability to read and interpret blueprints, technical drawings and specifications;
- Ability to communicate clearly and concisely;
- May require the use of engineering test equipment, CAD, and/or various computer systems.
- Ability to operate effectively in a team environment.

Education:
- Bachelors degree in an appropriate discipline/science and two (2) years directly related experience as an associate engineer or equivalent combination of education and experience.
 
Job Number: 6922
Job Location: Canoga Park, CA
Rate: $50.00 - $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 01/03/2017
Last Updated: 01/31/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer II CA URGENT

Description:
Job Title: Engineer II
Job Number: 158217/6006806
Location: Canoga Park, CA
Compensation: 55/hr max
Assignment Length: 8 month contract

Description:

** This is not a Project Engineer role. Looking for candidates who have hands on mechancial experience. This position will be setting up lab experiements and managing data **

** Candidates must be U.S. Citizens **** Permanent residents are not eligible for this role **** Dual citizens are not eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are not acceptable **


Position is for a development engineer in support of development of rocket engine combustion devices hardware (injectors, combustion chambers, nozzles, ignitors).
Responsibilities include design support, trade studies, hardware development, specification preparation and release, fabrication support, test planning, vendor/supplier integration and coordination.
Supports combustion devices hardware through the entire product life cycle.
Analyzes and verifies product design and performance for adequacy and reliability.
Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.
Interfaces with other members of project or program teams, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
Under general supervision and following established policies, performs professional engineering assignments requiring full use and application of standard engineering principles, theories, concepts and techniques.
Typical responsibilities include: Performs work which involves conventional types of studies, investigations, structures, or equipment with relatively few complex features. Independently evaluates, selects and applies engineering techniques, procedures, and criteria using judgment in making adaptations and modifications.
Assignments typically have specified objectives and require the investigation of a limited number of variables.
May make presentations to small audiences.
Selects applicable analytical data from previous products, determines the technical principles involved, mathematically defines the problem and computes the engineering characteristics consistent with the specifications, design needs, and requirements of other portions of the product.
May assign work to and direct less senior engineers and support personnel as required.
Work is reviewed for soundness of technical judgment and overall adequacy and accuracy.
Erroneous decisions or recommendations, or failure to get results may cause delays in project schedules and result in the allocation of more resources. Contacts are primarily intra-organizational.

May also be involved in interfacing with other organizations. Outside customer contacts would be infrequent and on routine matters.
Skills:
General engineering/science background; Understanding and use of analytical, design or process procedures pertinent to the particular field of engineering. Knowledge of statistical methods.
Ability to read and interpret blueprints, technical drawings and specifications; Ability to communicate clearly and concisely; May require the use of engineering test equipment, CAD, and/or various computer systems.
Ability to operate effectively in a team environment.

Keywords:
Education:
Bachelors degree in an appropriate discipline/science and two years directly related experience as an associate engineer or equivalent combination of education and experience.
 
Job Number: MB-6006806
Job Location: Canoga Park, CA
Rate: 55/hr max
Duration: 9 month contract
Input Date: 01/18/2017
Last Updated: 01/27/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Designer II

Description:
Engineering Designer II

Location: Canoga Park, CA
Rate: $30.00 - $32.00/HR
3+ month contract

** Candidates must have experience with Creo and Geometric Dimensioning & Tolerancing (GD&T) **
** Candidates must be U.S. Citizens **
** Permanent residents are not eligible for this role **
** Dual citizens are not eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are not acceptable **

Duties:
Design and Development Engineer - Must be able to specify valve type, valve trim configuration, material and seal packing’s for liquid rocket engine systems.

- Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
- Applies research to the planning design Development and testing of valves, actuators and associated hardware
- Applies theories of heat and energy transfer to create practical solutions to technical problems
- Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
- Majority of work will be to develop and maintain valve layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.

Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.

Skills:
There are 3 different skill sets that they would accept:
1. Entry Level Designer
-Less that 5 years of technical experience.
-Experience with two or more of the following:
a. Creo
b Geometric Dimensioning and Tolerancing (also known as GD&T or ASME 14.5)
c. Windchill
d. Rocket
e. Valve
f. High Pressure
g. Cabling
h. Harness

OR

2. Engineering Designer II (Valve)
-Creo
-Geometric Dimensioning and Tolerancing (also known as GD&T or ASME 14.5)
-Experience with two or more of the following:
a. Windchill
b. Rocket
c. Combustion
d. Valve
e. High Pressure

OR

3. Engineering Designer II (Harness)
-Creo
-Geometric Dimensioning and Tolerancing (also known as GD&T or ASME 14.5)
-Experience with two or more of the following:
a. Windchill
b. Harness
c. Cable
d. Line Routing
e. Sensor

Education:
- BS degree in Engineering or equivalent. MS degree is desired.
 
Job Number: 6907
Job Location: Canoga Park, CA
Rate: $30.00 - $32.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 3+ mos
Input Date: 01/23/2017
Last Updated: 01/25/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Facilities Assistants - Greensboro, NC

Description:
STS AeroStaff Services is currently hiring Facilities Assistants for open positions in Greensboro, North Carolina.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Purpose:

Individual will work closely with the Facilities Maintenance Coordinator and Facilities Supervisor to support facilities systems, building and grounds activities. In addition this individual will support the activities of other groups within the Facilities Department.

Job Duties:

• Monitors contractor performance and works closely with outside vendors and contractors to ensure work is completed according to specifications.
• Monitors and replaces light bulbs in all assigned facilities, as needed.
• Perform scheduled preventative maintenance on all electrical equipment and systems to include Switchgear, Motors, Transformers, VFD’s, Lighting and Overhead Cranes.
• Performs routine preventative and corrective maintenance of building, grounds, heating and ventilation and air conditioning systems.
• Overall responsibility for the maintenance and repair of building system infrastructure, including upkeep of buildings, grounds, equipment and electrical systems.
• Provide basic maintenance and repair of plumbing systems as directed, to include repair of leaking fixtures, unclogging drains.
• Troubleshoot, maintain and perform basic repair of minor building electrical problems, such as changing lamps, ballasts, fixtures, switches, outlets.
• Responds to emergency situations for the purpose of resolving immediate safety concerns.
• Performs other maintenance duties as assigned by the Facilities Supervisor.
• Duties may require the self-performance of certain activities relating to projects
• Individual will also be responsible for the self- performance of task related to the building and grounds maintenance.
• Understand and review all phases of construction inspection, facility inspection, and project monitoring related to space planning and renovation.
• Review construction plans and detailed specifications to ensure alignment of project requirements.
• Understand construction methods, materials, processes, and sequences of installation;
• Assist in the logistics of contractor/supplier mobilization to perform work.
• Assist in the coordination of contractor/supplier support for warranty repair execution;
• Inspect completed work for defects and compliance with priority, scheduling, and specifications/requirements.
• Complete/track work orders assigned by the Maintenance or Projects Supervisor.
• Interface proficiently with Company’s CMMS (Computerized Maintenance Management System).
• Coordinate/oversee contracted services during the performance of work.
• Respond to equipment breakdowns and emergencies during off-hours.
• Oversee and perform quality checks for planned work in the absence of supervisor.
• Assist in the development of short interval schedules in coordination with planned work activities.
• Perform other duties as requested or assigned.
• Assists with inspections on life safety systems to include but not limited to fire extinguishers, fire pumps, emergency lighting and power generators, back-up power systems and elevators. Notifies Supervisor of corrective actions needed.
• Adheres to safety policies, industrial practices.
• Performs other duties assigned, including emergency call-in and shift rotation.

Qualifications:

• High School Diploma or GED certificate with four or more years of progressive and practical experience in HVAC or electrical systems.
• Degree or certificate in HVAC or an Associate’s of Science Degree or related technology with a minimum of two (2+) years of experience
• Basic knowledge of facilities maintenance and repair concepts required. Basic computer proficiency (Microsoft Office programs). Clean driving record and criminal background history.
• CAD experience is a plus.

Requirements:

• Must be able to work any shift that client management determines necessary to support production demands.
• Must possess the ability to troubleshoot equipment and system breakdowns utilizing schematics, drawings and equipment manuals.
• Must be able to effectively communicate (oral and written) with all employees, contractors and vendors.
• Self-starter and team player.
• Understand and follow oral and written instructions.
• Ability to prioritize and manage multi-functional tasks.
• Ability to work effectively under pressure, and against strict time constraints.
• Knowledge of doors/hardware (locksets, door closures, frames).
• Basic understanding to advanced knowledge of PLC systems.
• Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.
• Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
• Incumbents may be required to stand, sit, squat, walk, bend, climb ladders, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
• Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
• Read, hear, speak, and see with no restrictions, as required by job duties.
• Comprehend and adhere to management directions and/or safety instructions with no restrictions.
• Effectively communicate in Business English language.
• Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.
• Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties.

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 36316
Job Location: Greensboro, NC
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 01/09/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Facilities Technicians - Greensboro, NC

Description:
STS AeroStaff Services is currently hiring Facilities Technicians for open positions in Greensboro, North Carolina.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Purpose:

Individual will work closely with the Facilities Maintenance Coordinator and Facilities Supervisor to support facilities systems, building and grounds activities. In addition this individual will support the activities of other groups within the Facilities Department.

Job Duties:

• Monitors contractor performance and works closely with outside vendors and contractors to ensure work is completed according to specifications.
• Monitors and replaces light bulbs in all assigned facilities, as needed.
• Perform scheduled preventative maintenance on all electrical equipment and systems to include Switchgear, Motors, Transformers, VFD’s, Lighting and Overhead Cranes.
• Performs routine preventative and corrective maintenance of building, grounds, heating and ventilation and air conditioning systems.
• Overall responsibility for the maintenance and repair of building system infrastructure, including upkeep of buildings, grounds, equipment and electrical systems.
• Provide basic maintenance and repair of plumbing systems as directed, to include repair of leaking fixtures, unclogging drains.
• Troubleshoot, maintain and perform basic repair of minor building electrical problems, such as changing lamps, ballasts, fixtures, switches, outlets.
• Responds to emergency situations for the purpose of resolving immediate safety concerns.
• Performs other maintenance duties as assigned by the Facilities Supervisor.
• Duties may require the self-performance of certain activities relating to projects
• Individual will also be responsible for the self- performance of task related to the building and grounds maintenance.
• Understand and review all phases of construction inspection, facility inspection, and project monitoring related to space planning and renovation.
• Review construction plans and detailed specifications to ensure alignment of project requirements.
• Understand construction methods, materials, processes, and sequences of installation.
• Assist in the logistics of contractor/supplier mobilization to perform work.
• Assist in the coordination of contractor/supplier support for warranty repair execution.
• Inspect completed work for defects and compliance with priority, scheduling, and specifications/requirements.
• Complete/track work orders assigned by the Maintenance or Projects Supervisor.
• Interface proficiently with Company’s CMMS (Computerized Maintenance Management System).
• Coordinate/oversee contracted services during the performance of work.
• Respond to equipment breakdowns and emergencies during off-hours.
• Oversee and perform quality checks for planned work in the absence of supervisor.
• Assist in the development of short interval schedules in coordination with planned work activities.
• Perform other duties as requested or assigned.
• Assists with inspections on life safety systems to include but not limited to fire extinguishers, fire pumps, emergency lighting and power generators, back-up power systems and elevators.
• Notifies Supervisor of corrective actions needed.
• Adheres to safety policies, industrial practices. Performs other duties assigned, including emergency call-in and shift rotation.

Qualifications:

• High School Diploma or GED certificate with four or more years of progressive and practical experience in HVAC or electrical systems.
• Degree or certificate in HVAC or an Associate’s of Science Degree or related technology with a minimum of two (2+) years of experience
• Basic knowledge of facilities maintenance and repair concepts required. Basic computer proficiency (Microsoft Office programs). Clean driving record and criminal background history.
• CAD experience a plus.
• Must be able to work any shift that client management determines necessary to support production demands.
• Must possess the ability to troubleshoot equipment and system breakdowns utilizing schematics, drawings and equipment manuals.
• Must be able to effectively communicate (oral and written) with all employees, contractors and vendors.
• Self-starter and team player.
• Understand and follow oral and written instructions.
• Ability to prioritize and manage multi-functional tasks.
• Ability to work effectively under pressure, and against strict time constraints.
• Knowledge of doors/hardware (locksets, door closures, frames).
• Basic understanding to advanced knowledge of PLC systems.
• Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.

Requirements:

• Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
• Incumbents may be required to stand, sit, squat, walk, bend, climb ladders, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
• Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
• Read, hear, speak, and see with no restrictions, as required by job duties.
• Comprehend and adhere to management directions and/or safety instructions with no restrictions.
• Effectively communicate in Business English language.
• Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.
• Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties.

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 36317
Job Location: Greensboro, NC
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 01/09/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
Flight Test Engineer
Menominee, MI
12+ month contract

Open to Entry Level AND Sr. level candidates!

POSITION RESPONSIBILITIES


This individual will work in the Experimental Engineering department and will be responsible for conducting R&D and certification ground/flight tests. The candidate will be responsible for test preparation, planning instrumentation installations, instrumentation and equipment calibration, programming data acquisition software, data reduction, and test reporting. He/she will assist in test conformities and TIA preparation, participate in FAA certification projects, support safety of flight briefings, and assist other Engineering Groups on an “as needed/as available” basis depending upon his/her other skills and abilities.


Duties include but are not limited to the following:

This individual will be responsible for R&D and certification ground/flight tests, including:
•Reviewing proposed projects and developing compliance and test matrices
•Planning, writing, and/or reviewing test plans and reports
•Programming data acquisition software
•Data reduction
•Planning aircraft flight and ground test instrumentation installations
•Instrumentation and equipment calibration
•Conducting weight and balance and maintaining records
•Conducting ground/flight tests, including pilot coordination and pre/post flight briefings as required
•Coordination and preparation of test conformities and TIA activities




REQUIRED KNOWLEDGE, SKILLS AND ABILITIES
•Minimum of a Bachelor’s of Science degree in Aerospace Engineering, Engineering Physics, or related field.
•An understanding of aircraft structure and systems, rotorcraft dynamics, aerodynamics, and powerplant.
•An understanding of FAA rules, regulations, and certification processes.
•An understanding of and ability to write test practices and procedures.
•Experience with strain gauges, instrumentation, and wiring.
•Intermediate understanding of data acquisition software (LabView and/or Matlab preferred).
•Advanced computer skills (MS Word, Excel, PowerPoint, Project).
•Superior problem solving skills.
•Superior communication skills (verbal and written).
•An ability to work multiple projects and multi-task.
•Proven organizational skills.
•Works with minimal supervision
•Ability to work within a team
The following are desirable, but not required:

•FAA A&P License
•FAA Pilot License
•Understanding of Microsoft Access
•Basic design skills (SolidWorks, CADKey)
 
Job Number: 51046
Job Location: Menominee, MI
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12+ months
Start Date: 1/23/16
Input Date: 01/11/2017
Last Updated: 01/16/2017
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Hydraulic Design/Electro-Mechanical Systems Engineer

Description:
Hydraulic Design/Electro-Mechanical Systems Engineer

Location: Savannah, GA
Rate: $60.00 - $63.00/HR
Long Term contract


Unique Skills:
- Basic understanding of Hydraulics as it applies to aircraft is required.
- Use of CATIA or similar 3D CAD system is required.
- Experience with Hydraulic Design preferred.
- Experience with CATIA tubing work bench is preferred.
- Experience with designing for compliance to FAR 25.1435 is preferred.


Education and Experience Requirements:
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in the specific technical discipline or 15 yrs broad engineering experience in several technical disciplines with Bachelors, or 8 yrs in the specific technical discipline with Masters, or 6 yrs in the specific technical discipline with PhD.


Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Principal Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 2. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 6524
Job Location: Savannah, GA
Rate: $60-$63
Per Diem: Yes
Overtime: Possible
Duration: LT
Input Date: 03/22/2017
Last Updated: 07/11/2017
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Hydraulic Design, Electro-Mechanical Systems Engineer/TSII

Description:
UNIQUE SKILLS
Basic understanding of Hydraulics as it applies to aircraft is required. Use of CATIA or similar 3D CAD system is required. Experience with Hydraulic Design preferred. Experience with CATIA tubing work bench is preferred. Experience with designing for compliance to FAR 25.1435 is preferred.

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs. in the specific technical discipline or 15 yrs. broad engineering experience in several technical disciplines with Bachelors, or 8 yrs. in the specific technical discipline with Masters, or 6 yrs. in the specific technical discipline with PhD.

POSITION PURPOSE
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

ADDITIONAL FUNCTIONS
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
2. Performs other duties as assigned

OTHER REQUIREMENTS
1. Advanced degree in engineering, or related curriculum preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 16-629-78841
Job Location: Southeast
Rate: $60.00 to $63.00/per hr.
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 07/13/2017
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer

Manufacturing Engineer must have experience with aircraft major structural assemblies/installations. Experience with Soloumina, Smarteam, Catia V5 preferred.
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning).

Principal Duties and Responsibilities:

Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 9. Utilize CADAM/CATIA data and nesting software to generate flat patterns, Master Models, NC data, and ply nests to meet Engineering and Manufacturing requirements. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. 3. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
Education and Experience Requirements:
Bachelors degree in Mechanical, Manufacturing Engineering or related curriculum, or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Three (3) years Manufacturing Engineering, planning, or related technical experience.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 09/08/2016
Last Updated: 01/20/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
UNIQUE SKILLS
Solumina and Catia experience preferred

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor’s degree in Mechanical, Manufacturing Engineering or related curriculum, or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Three (3) years Manufacturing Engineering, planning, or related technical experience.

POSITION PURPOSE
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning).

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
2. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
4. Investigate and assist in preparing justification for equipment and facility requests.
5. Perform productibility studies from engineering drawings.
6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
8. Incorporate Lean Manufacturing Methodology into existing and future processes.
9. Utilize CADAM/CATIA data and nesting software to generate flat patterns, Master Models, NC data, and ply nests to meet Engineering and Manufacturing requirements.
10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
12. Support all Safety, Sustainability and Ergonomic Initiatives.
13. Aid in development and maintenance of Business Continuity Plan.

ADDITIONAL FUNCTIONS
1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
2. Initiate and maintain accurate daily/weekly activity status based on work output, as required.
3. Perform other duties as assigned.

OTHER REQUIREMENTS
1. Proven knowledge of Lean and/or Six Sigma principles.
2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc.
4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 16-651-88624
Job Location: Southeast
Rate: $50.00/per hr.
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 01/11/2017
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Manufacturing Engineer II

Location: Savannah, GA
Rate: $50.00/HR
Long Term contract


Unique Skills:
SAP, Solumina, Electrical systems knowledge

Education and Experience Requirements:
Bachelors degree in Mechanical, Manufacturing Engineering or related curriculum, or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Three (3) years Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning).

Principal Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 9. Utilize CADAM/CATIA data and nesting software to generate flat patterns, Master Models, NC data, and ply nests to meet Engineering and Manufacturing requirements. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. 3. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 6940
Job Location: Savannah, GA
Rate: $50.00/HR
Per Diem: Possible
Overtime: Possible
Duration: LT
Input Date: 01/10/2017
Last Updated: 01/31/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Master Production Scheduler Manager

Description:
Title: Master Production Scheduler Manager
Location: Santa Maria, CA 92455
Duration: 12 Months

Job Summary:
The MPS manager is responsible for the management of the Master Production Schedule, by integrating all demand and capacity inputs from S&OP, Sales admin, Program, Workcenter Planning, Customer Services and Operations. The manager will update and optimize the MPS on a weekly cadence to meet customer commitments, and ensure its correct adequacy and execution inside the ERP at the Final Assembly Lines (FAL) level. The MPS manager will work closely with Operations and provide the Rough Cut Capacity Planning, critical path analysis by program/shipset, shortages analysis on FAL, highlighting any schedule risks and identify and correct any schedule logic deficiencies. The MPS manager will provide to Operations and Leadership team with an accurate status of progress to date and immediate future planning schedules.
The MPS manager will report to the Planning Director, and will supervise the Master Scheduler.

Summary of Duties
• Translate the S&OP and Demand from both Original Equipment and Customer Services into an optimized production schedule
• Ensure the synchronization of MPS shared by internal customer (ZSF, ZSUS, ZSUK)
• Optimize the utilization of the FAL lines
• Conduct the Rough Cut Capacity Planning (RCCP) by collecting capacity constraints from Ops and Work center Planers
• Run schedule simulations based on capacity constraints and customer commitments to propose 'what if' scenarios to Leadership team
• Maintain the MPS on a weekly basis to provide accurate status to Operations Leadership and the customer
• Execute the validated master schedule into the highest level of ERP (Sales Order or top Work Orders) to ensure material requirements are cascaded
• Verify the accuracy and consistency between the S&OP, MPS and MRP
• Liaise with Program Managers to obtain data required to update the schedules, including remaining work and ECD for plan tasks
schedule critical path analysis, capacity analysis, and the identification and correction of schedule logic deficiencies.
• Run shortage analysis by program/ship sets to assess risks and confirm feasibility of MPS
• Run various reports and adhoc analysis, including planning adherence
• Related tasks as required by the Planning Director
• Prepare and lead the MPS Meetings weekly: notify and define participants, agenda and review previous actions and meeting minutes.
• Establish and maintain the process and management routines for the preparation and maintenance of the MPS, and ensure these processes meet the Zodiac Branch standards
• Improve, deploy and drive MPS Tool Requirements, to ensure automated interfaces between S&OP and ERP and simulation capability
• Manage the resources allocated to support the realization of the RCCP, shortage analysis, MPS and its execution into the ERP
• Clean and organize work areas
• 5S +1

Qualifications
Education: Bachelor's degree required, engineering degrees a plus. CPIM certification a plus.
Experience: 3 years as Master Scheduler minimum, 5 years in Production Planning
Strong experience with complex planning. Strong understanding of MRP concepts. APICS certification is a plus
Experience in an Engineering To Order (ETO) environment, preferably in aerospace.
Familiarity with Project Management fundamental and Phase Gated Project Lifecycle is required.
Experience as Project Planning & Control experience a plus.

Computer skills : MS Excel (2007 advance user, 2010), proficient with MS Office programs (Office, PowerPoint & Word), ERP systems
Other skills : Strong analytic mindset, and comfortable with manipulating data.
Excellent verbal and written communication skills. Good interpersonal skills for extracting the necessary data from development team members. Self-starting, self -reliant and focused
 
Job Number: 51011
Job Location: Santa Maria, CA
Duration: 12 mos
Input Date: 01/06/2017
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Mallik
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Materials & Process Engineer III - MP&P Engineer (PA)

Description:
MP&P Engineer 3 Assignment
Defines requirements for materials, parts and processes used in the manufacture of products. Produces specifications and other documents to manage the deployment of materials, parts and processes. Maintains compliance with contractual and regulatory obligations. Promotes standardization across business activities. Evaluates emerging technologies for potential application to business needs. Develops and qualifies new materials, parts and processes to meet requirements. Integrates new technologies as appropriate. Manages test and audit programs to qualify suppliers to applicable requirements. Conducts analysis to determine reasons for failures of materials, parts or processes. Implements corrective and preventive actions. Designs, develops and qualifies computer and production systems to satisfy user requirements. Works under general direction.

Additionally…
The main focus of this assignment will be CH47 Chinook factory support. This includes being co-located on the factory floor working with existing processes and equipment associated with the rotorcraft production line, identifying effective manufacturing technology (processes, tools and equipment) to accomplish the build work statement, supporting repair of defective conditions on the aircraft, project management skills, specifically for projects that develop and insert manufacturing technology into current or future build process, and daily interaction with shop personnel. Identify safety and ergonomic improvements. Provide portable and perishable tool recommendations.

MORE SPECIFIC ASSIGNMENT QUALIFICATIONS:
_Ability to work with factory mechanics, as well as other organizations such as ME, QA, IE and Engineering are required.
_Initiative, teaming, planning, project management and communication skills are required.
_Ability to innovate and strategize, as well as work with details to drive projects to successful completion and implementation.
_CAD, CATIA, or Solid Works, MS Office, 3D printing are required—Must state the level or experience and training in each of these skills.
_Assignment may require occasional domestic travel of approximately 5% from Boeing to Suppliers facilities.
__Assignment requires ability to work overtime and/or different shifts when needed.

Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.
 
Job Number: MP&Ppa
Job Location: Ridley Park, PA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 12/02/2016
Last Updated: 01/20/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer III

Description:
Seeking a Mechanical Engineer III for an opening in Anaheim, CA.

RESPONSIBILITIES:
Under general supervision, the Mechanical Engineer III is responsible for the mechanical layout and packaging of power conversion equipment and other Navy based electronic systems. This person generates equipment layouts that satisfy system requirements and account for tradeoffs among thermal, mass properties, structural and manufacturing considerations.

1.Interprets customer specifications to define requirements for mechanical designs.
2.Applies the Inventor 3D CAD system to create mechanical layouts and drawings.
3.Develops detailed fabrication and assembly drawings and performs tolerances analysis.
4.Designs interconnecting brackets and support structure between components and subsystems.
5.Supports other mechanical engineers and drafters in conceptual design and preparation of mechanical drawings.
6.Generates project cost estimates and selects components for various designs.
7.Performs thermal and structural analyses under the guidance of lead mechanical engineers.
8.Generates engineering design change orders and performs checking work.
9.Responsible for project budget/schedule adherence.
10.Uses established and well defined engineering procedures.
11.Knowledge of military and commercial standards pertaining to design, testing, hardware, material, and processes a must.
12.Able to work simultaneously on a variety of projects.
13.Takes directions from project engineer or department manager.

REQUIRED EXPERIENCE:
Bachelor of Science degree in Mechanical Engineering from four-year college or university. Must have at least 5 years of experience in mechanical design and engineering.

1.Practical experience with 3-D CAD and analysis software tools.
2.Knowledge of Mil-Specifications and qualification testing.
3.Good communication skills

•Electronics packaging experience and familiarity with Military specifications.
•3D CAD fluency is also a must along with experience with complex systems.
•Rigid flex/bus plane design
•System level design

ADDITIONAL EXPERIENCE:
•Electronics Packaging – this is a requirement for ME III and up for me. – ME III and up
•Recent 3d CAD experience (strong preference is Inventor) – ME II and up
•Vault experience or similar and how recently they’ve used it – ME II and up
•PLM experience (preferred, but not mandatory) – ME II and up
•Able to read basic schematics (preferred, but not mandatory) – ME II and up
•Tolerance Analysis – Preferred for ME II and ME III

EDUCATION:
Bachelor of Science degree in Mechanical Engineering from four-year college or university.

WORK HOURS:
9/80, Day Shift

LANGUAGE SKILLS
Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.

MATHEMATICAL SKILLS
Ability to work with mathematical concepts such as probability and statistics inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.

REASONING ABILITY
Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.

PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is regularly required to walk; sit; use hands and fingers, handle, or feel; reach with hands and arms; and talk or hear. The employee is occasionally required to stand. The employee must regularly lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus.

WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

The noise level in the work environment is usually moderate.

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 161355
Job Location: Anaheim, CA
Rate: $65 - $75
Per Diem: No
Overtime: Possible
Duration: 6 mths.
Start Date: ASAP
Input Date: 01/10/2017
Firm Name: CHIPTON ROSS
Attention: Melody Mullins
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

Mechanical Engineers

Description:
3D CAD, FEA a plus
 
Job Location: Midwest
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: annmarie@advancedtechno.com
Website: www.advancedtechno.com

Mechanical Engineers

Description:
3D CAD, FEA a plus
 
Job Location: Southeast
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: annmarie@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineers I - Anaheim, CA

Description:
STS AeroStaff Services is currently hiring Mechanical Engineers I for open positions in Anaheim, California.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Purpose:

Under general supervision, the Mechanical Engineer I interprets specifications and other requirements, performs complex analysis, design, plans, estimates tasks, directs the execution of detail design and ensures appropriate documentation on projects. The Mechanical Engineer I evaluates and integrates cost effective design, producibility, and manufacturing practices into mechanical designs. Works directly with all engineering supporting disciplines to establish product concepts and carries ideas through final product design. Coordinates and reviews the work of designers and drafters assigned to the program. Complexity of assignments requires the exercise of considerable initiative, planning, and independent judgment.

Job Duties:

• Reviews and interprets specifications and requirements to determine structural, thermal and critical safety characteristics/considerations for mechanical designs.
• Supports other mechanical engineers and drafters in conceptual designs and the preparation of mechanical drawings.
• Reviews and approves project documentation, change requests, etc.
• Performs conceptual designs to meet project objectives, cost, and schedule.
• Will be responsible for all phases of designs from concept through prototype manufacture and production.
• Performs feasibility studies to reconcile project requirements with proposed designs.
• Estimates material and labor costs for proposed designs and proposals.
• Designs cooling systems for new and updated products.
• Prepares and is responsible for project budget/schedule adherence.
• Performs packaging and mechanical design of power conversion equipment.
• Assists in cost estimates and interfaces with suppliers of components/sub-systems.
• Conducts thermal, structural and tolerance analysis.
• Strong knowledge of material and hardware selection including welding, fabrication practices, and machining tolerances to complete a cost-effective design.
• Interfaces with customers, vendors, and production to develop product requirements and solutions.
• Supports the manufacturing build and qualification testing requirements as needed.
• Responsible for maintaining Computer Aided Engineering/Design skills in support of the mechanical engineering and design functions.

Qualifications:

• Bachelor's degree (BSME) from four-year college or university; and minimum 8 years related experience and/or training.
• Knowledge of military and commercial standards pertaining to design, testing, hardware, material, and processes a must.
• Knowledge of Navy/Military environmental qualification testing.
• Knowledge of Mil-Specifications and contracting.
• Skilled in finite element analysis.
• Good communication skills.
• Experience using 3-D CAD software tools in design function.
• Autodesk Inventor, or equivalent modeling software (solid modeler) experience a must.
• Able to obtain DOD security clearance.
• Electronics packaging experience and familiarity with Military specifications.
• 3D CAD fluency is also a must along with experience with complex systems.
• Rigid flex/bus plane design and/or system level design is a plus.
• Electronics Packaging experience is a plus.
• Vault experience or similar and how recently they’ve used it is a plus.
• LM experience (preferred, but not mandatory).
• Able to read basic schematics (preferred, but not mandatory).
• Tolerance Analysis experience is a plus.

Requirements:

• Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations.
• Ability to write reports, business correspondence, and procedure manuals.
• Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
• Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
• Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.
• Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.
• While performing the duties of this job, the employee is regularly required to sit; use hands and fingers, handle, or feel; and talk or hear.
• The employee is occasionally required to stand, walk, and reach with hands and arms.
• The employee must regularly lift and/or move up to 10 pounds.
• Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus.

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 37307
Job Location: Anaheim, CA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 01/09/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical System Design & Analysis Engineer III (NM)

Description:
TOP SECRET OR ACTIVE SECRET REQUIRED TO START

This person will supports the development and documentation of mechanical and fluid system and thermal environment requirements to establish the system design. Supports the development, maintenance or modification of system, component and installation designs/proposals to provide design documentation to downstream groups. Performs and documents analyses to validate and verify systems and components meet requirements and specifications. Contributes to supplier development, test and production activities and directs the supplier to optimize integration and achieve program goals. Supports system components'' designs/proposals standards to provide installation and detail documentation. Trains others. Works under general direction.

Skills:
- Experience with structural analysis of large moving structures.
- Experience with Finite element analysis tools for predicting thermo-mechanical stability, like Ansys/FEMAP.
- Proficiency with 3D CAD design packages, like Solidworks/Inventor and Autocad.
- Experience in thermal management and fluid dynamics of cooled cameras and vacuum chambers is highly desired.
- Experience with opto-mechanical design of optical systems and optical component assemblies is highly desired.
- Experience with the mechanical tolerance of optical systems (mechanical, optical, thermal) is highly desired.
- Familiarity with Zemax and basic optical design is highly desired
- Applicants must have good communication, analytical, and organizational skills and be able to work in a team
environment.

Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.
 
Job Number: MechIIINM
Job Location: Kirtland AFB, NM
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: 01/03/2017
Input Date: 12/09/2016
Last Updated: 01/20/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Metrology Engineer

Description:
Metrology Engineer under minimal supervision, prepare, conduct, and evaluate for the implementation, programming and support of metrology equipment in tooling, program development and production. Assist with the improvements and problem solving for design and manufacturing issues related to tooling, material fabrication and assembly methods.


Interpret and consolidate aircraft engineering, tooling designs and production requirements, to develop optimized measurement plans and processes. Under minimal supervision, develop programing for all measurement equipment that will be used in the development, manufacture and support of aircraft. Collaborate with engineering, tooling, manufacturing engineering and operations to determine optimal manufacturing procedures. Assist in developing and documenting standards for the handling and utilization of metrology equipment. Create standardized inspection reports through the utilization of Metrologic software.

Extensive knowledge of metrology equipment, software and current measurement techniques. Knowledge 3D CAD/CATIA modeling and an understanding of GD&T. Knowledge of Lean and/or Six Sigma principles.
Ability to read/understand complex blueprints, sketches, verbal instructions and tools. Tooling experience and/or relevant training preferred. Experience with using precision 3D measurement devices to locate and assemble parts or tools. Must be proficient in the use of portable precision measuring devices especially laser trackers. Experience with Metrolog X4 or X4V5 software preferred. Experience with Catia V5 software. ***This job involves extensive Laser Tracker work on the shop floor. Experience with Laser Trackers is a must.***
Bachelor’s degree in Mechanical Engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Three (3) years Metrology Engineering, Manufacturing Engineering, Automation Engineering or related technical experience. Two (2) years 3D CAD/CATIA experience.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/10/2016
Last Updated: 01/20/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

Metrology Engineer (Laser Tracker Operator)

Description:
Under minimal supervision, prepare, conduct, and evaluate for the implementation, programming and support of metrology equipment in tooling, program development and production. Assist with the improvements and problem solving for design and manufacturing issues related to tooling, material fabrication and assembly methods.

Unique Skills:
1. Must have extensive experience with Laser Trackers
2. Knowledge of Metrolog X4V5, X4, and XG.
3. Knowledge of session management and releasing in SmarTeam is a plus.

Education and Experience Requirements:
Bachelors degree in Mechanical Engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
Three (3) years Metrology Engineering, Manufacturing Engineering, Automation Engineering or related technical experience. Two (2) years 3D CAD/CATIA experience.

Other Requirements:
Extensive knowledge of metrology equipment, software and current measurement techniques.
Knowledge 3D CAD/CATIA modeling and an understanding of GD&T.
Knowledge of Lean and/or Six Sigma principles
 
Job Number: 24-269
Job Location: Savannah, GA
Rate: $50 - $55/hr
Per Diem: YES
Overtime: YES
Duration: 1 plus years
Start Date: ASAP
Input Date: 07/03/2018
Last Updated: 07/16/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NX CAD Designer - Level 4 with active secret URGENT FL

Description:
Job Title: NX CAD Designer
Job Number: 158212/5830523
Location: Jupiter, FL
Compensation: DOE
Assignment Length: 7 month contract

Description:

Duties: ** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years. They must be able to obtain and maintain a U.S. Security Clearance at the appropriate level **
** If candidates do not have a current Secret clearance, they must be able to obtain an Interim clearance pending issuance of a full Secret clearance **** Candidates must be U.S. Citizens **
** Must be able to satisfy federal government requirements for access to government information. Permanent residents are not eligible for this role. Dual citizens are not eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are not eligible **



Under general direction, performs engineering design assignments requiring a wide application of advanced principles, theories and concepts in the field plus a working knowledge of other related disciplines.
Provides imaginative, thorough, and practicable solutions to a wide range of technical design problems.
Performs design calculations to validate design requirements.
Provides data in support of contract data requirements list (CDRL) submittals.
Participates in preliminary and critical design reviews, drawing reviews, recommending changes as necessary.
Participates as a member of a project team.
Responsible for escalating in a timely manner when commitment dates of assigned and individual work cannot be met.
Check engineering drawings, design packages and related data for compliance to contractual requirements, accuracy, completeness and geometric tolerance standards.
Work is reviewed upon completion for adequacy in meeting objectives.
Erroneous decisions or recommendations or failure to get results may result in project delays and considerable expenditure of resources.
Inter-organizational and resident customer contacts are frequent while outside customer contacts are occasional in providing solutions to technical problems associated with specific assignment.

Skills:
Must be an experienced and proficient NX CAD designer using version 8.5.

Effective interpersonal and communication skills and must be able to operate effectively in a team environment.
Working knowledge of geometric dimensioning and tolerancing (GD&T), the ability to read and interpret drawings and related specifications is required.
Working knowledge of Microsoft Word and PowerPoint is required (MS Word, MS Powerpoint).
Knowledge of manufacturing techniques and inspection requirements is a plus.

Keywords:
Education: Bachelors degree in an appropriate discipline and nine years of related technical experience as engineering designer or equivalent combination of education and experience.
# of Positions: 1
 
Job Number: MB-5830523
Job Location: Jupiter, FL
Rate: 50/hr max
Duration: 7 month contract
Input Date: 02/24/2017
Last Updated: 03/06/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer

Description:
What You Will Be Doing:
1. Engineering: Take full responsibility for project engineering activities and ensure that all engineering functions are completed in a timely, efficient manner and to the client's satisfaction.
2. System design drawings: Generate and develop system block diagrams, system single lines, and rack elevations.
3. Facility documentation: Prepare facility impact packages including conduit plans, cable schedules, engineering calculations for power consumption and heat load, equipment site plans, projection sightline drawings and user interface solutions (OCC panels and touch screen layouts).
4. Procurement: Validate equipment specifications and assist the Project Manager with purchasing activities if required.
5. Test: Conduct or oversee Factory and Site Acceptance Tests (FAT, SAT) and preprogramming activities to ensure systems meet defined performance specifications and quality standards.
6. Commissioning: Take full responsibility for the commissioning of The company systems on site. Ensure that systems are operational on schedule to allow programming and handover of the completed systems. Ensure systems meet or exceed minimum required performance specifications.
7. Programming: Take full responsibility for the project's programming requirements to ensure that all system programming is completed in a timely, efficient manner and to the client's satisfaction.
8. Communications: Effectively communicate engineering clarifications, design changes, and equipment substitutions to other departments and to clients' other consultants. Prepare and/or respond to Requests for Information (RFIs). Communicate installation, commissioning and programming requirements to other The company staff.

Experience, Skills and Attributes you will need to be successful:
1. Ability to read, create, and edit A/V/C technical specifications and system drawings.
2. Ability to successfully commission all aspects of an Audio Visual installation.
3. Ability to interface well with clients and co-workers.
4. Excellent written and verbal communication skills.
5. Ability to work on the engineering of several projects simultaneously.
6. Strong troubleshooting and fault finding skills.
7. Proficiency in programming Audio Visual equipment (e.g. AMX, Biamp, ClearOne, Crestron, Medialon, AMX, ESCAN, Watchout, Peavey Nion, Soundweb, Cisco, Polycom, Extron, and others).
8. Experience with audio DSP device programming. Experience with SMAART and EASE a plus.
9. Proficiency in a specialty within the Audio Visual industry.
10. Detail oriented with strong organizational skills.
11. VTC codecs, audio conferencing
12. CAD for creating and editing drawings
13. Industry certifications such as Infocomm CTS, CTS-D, CTS-I

Qualifications are required:
1. A Degree (or equivalent) in a related field.
2. Minimum three years of professional experience in Audio Visual technology and integration.
3. Hands-on fabrication and/or installation experience.
4. Knowledge of current products and trends in audio, video, control, and/or other related industries.
5. Proficiency with computers and standard office programs (MS Word, Excel, Outlook), knowledge of Audio Visual Software. AutoCAD and/or MS Visio experience.
 
Job Location: Orlando, FL
Rate: Open
Duration: Permanent
Start Date: ASAP
Input Date: 11/11/2016
Last Updated: 03/01/2017
Firm Name: JOHNSON SERVICE GROUP
Attention: Sidney Williams
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer Aerospace Test - Contract DY

Description:
Project Engineer Aerospace Test
Ingenium is looking for a Test Project Engineer to work at a client’s facility in Dayton Ohio supporting test of development high speed rotating turbine type equipment

Must be a U.S. Citizenship or Lawful Permanent Resident. No Visa or Student Visa candidates considered.

Additional Job Postings: http://www.ingeniumtech.com/tech_staffing/
Responsibilities:
Individual is required to serve in a technical project engineering role as a member of one of the clients starting product design teams. The product will be a high speed, pneumatic driven air turbine device connected to a gearbox speed reducer. The general direction for the individual in this role will be provided by the Engineering Leader, Engineering Project Management and Marketing/Sales leadership assigned to the product.
The role will be as a technical project engineer that will be responsible for the organization and timely accomplishment of various starting product related engineering activities. These tasks could include, but are not limited to, design, analysis, test, production support and direct customer support. It will be the responsibility of the person serving in this role to organize and directly monitor the technical activities utilizing available local and global resources. It will also be necessary for this individual to complete these activities when required. Required technical activities are to be completed in compliance with the quality and deliverable requirements provided by the project and/or marketing leadership. It will also be the responsibility of this individual to ensure completion of all necessary reports and design documentation supporting the decision-making process necessary to complete the requested activities
Desired Qualifications
Experience with effort required to perform static and dynamic stress and vibration finite element analyses using ANSYS software
Experience in the monitoring and completion of design, analysis and testing in the following areas:

• Rotating machinery
• Power transmission and related machine design elements
• Dynamic and static seals
• Bearings
• Turbomachinery
• Fluid flow in piping and valves


Involvement in projects requiring the design and analysis of structural housings that must survive in shock and high vibration environments
Ability to write and organize the completion of design and analysis reports
Ability to perform tolerance stack-ups on layout and check detail drawings with GD&T
Basic understanding of Design for Manufacturing and basic manufacturing methods of metallic components
Experience with UG NX CAD or equivalent 3-D design software
Solid oral and written communication skills
Strong interpersonal skills with emphasis on the ability to learn from and lead co-workers
Experience in the organization of field failure reviews
Experience with the organization and completion of multiple project initiatives in a timely manner consistent with project timeline requirements
Experience leading technical discussions with component suppliers regarding new product
definition and product quality.

Responsibilities
Participate in the design, analysis, and test elements of assigned tasks using sound engineering principles and adhering to business standards, practices, procedures while fulfilling product / program quality and delivery requirements
Utilize technical and organizational aptitude to complete assigned project activities in alignment with project timeline objectives
Participate in preparation of and presentation of technical and program reviews
Assure timely completion of proper documentation of technical data generated for the assigned projects and/or tasks
Interact with suppliers regarding completion of engineering project initiatives that include new component definition, quality concerns with existing products and in the support of field failure reviews.
Participate in the design, analysis, and test of assigned tasks using sound engineering principles and adhering to business standards, practices, procedures while fulfilling product / program requirements
Desired Software: LabVIEW experience is helpful but not required
Required Education & Experience:
Bachelor’s Degree in Mechanical or Aerospace Engineering or any specialized equivalent from an accredited university or college preferred. Comparable experience in test of comparable equipment considered
Position: Contract 12 months
Location: Dayton Ohio

Employment Criteria: U.S. Citizenship is required by law or government contract for this position. This position includes access or potential access to ITAR technical data. Therefore, candidates will need to qualify as a US Person which is defined as a US Citizen, a Permanent Resident who does not work for a foreign company/foreign government/foreign governmental agency or organization, or a political asylee in compliance with International Traffic in Arms Regulations.
Employment Statement: Ingenium Technologies is an equal opportunity employer and does not discriminate on the basis of race, color, religion, sex, age, national origin, disability, veteran status, sexual orientation or any other classification protected by federal, state or local law. Proof of eligibility for employment will be required upon employment.
Due to the requirements of the Customer, No Visa sponsorship is available.
 
Job Number: 69997
Job Location: Rockford, IL Illinois
Rate: $35.00/hr.
Per Diem: possible
Overtime: possible
Duration: 12 mos
Start Date: 2 weeks
Input Date: 01/09/2017
Firm Name: INGENIUM TECHNOLOGIES
Attention: David Johnson
Address: 4216 MARAY DR UNIT A1
City, State: ROCKFORD, IL 61107
Phone: 815/399-8803 X255
Fax Phone: 815/399-8804
Website: www.ingeniumtech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Inspector

Description:
Unique Skills:

Candidates must have experience with aircraft mechanical systems installation with some experience with aircraft electrical systems installations preferred. Experience with Solumina, Smarteam, and Catia V5 preferred.


Education and Experience Requirements:

Bachelors degree in Mechanical, Manufacturing Engineering or related curriculum, or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Three (3) years Manufacturing Engineering, planning, or related technical experience.

Position Purpose:

Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning).

Principal Duties and Responsibilities:

Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 9. Utilize CADAM/CATIA data and nesting software to generate flat patterns, Master Models, NC data, and ply nests to meet Engineering and Manufacturing requirements. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. 3. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc. 4. Lean Six Sigma Greenbelt Certification or higher preferred.

Languages Required (in addition to English): No Selection
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 09/08/2016
Last Updated: 01/20/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software/Computer Automation Engineer - RM

Description:
Johnson Service Group is seeking a Software/Computer Automation Engineer for a 12+ month contract opportunity in Stratford, CT!

No Corp to Corp or H1b sponsorship.

Job Description:

Perform duties associated with implementing electrical design software tools including CATIA V6 as well as enhancements to CCD/CADEX. Specific duties include:
Managing project schedule performance and briefing senior management.
Performing or contracting upgrades of automation code written for CATIA V5 to work with CATIA V6.
Writing requirements documents for automation code.
Managing test plans and validation of requirements completion.
Performing design processes in CATIA V6 and documenting process steps.
 
Job Number: 352701
Job Location: Stratford, CT
Rate: Open
Per Diem: yes
Overtime: yes
Duration: 12 months
Start Date: ASAP
Input Date: 11/16/2016
Last Updated: 03/01/2017
Firm Name: JOHNSON SERVICE GROUP
Attention: Richard Martinsen
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Staff Design Engineer / electrohydraulic, electromechanical, and electropneumatic components / Cadence Allegro ORCAD VHDL Matlab Simulink NY

Description:
Job Title: Staff Design Engineer
Job Number: 156119/4285
Location: East Aurora, NY
Compensation: 80/hr
Assignment Length: 6 month contract

Description:

This position is responsible for development of complex electrohydraulic, electromechanical, and electropneumatic components and systems that will become the new products of Moog, Inc. The incumbent plans and conducts efforts requiring authoritative judgment in the evaluation, selection, and substantial adaptation and modification of standard and nonstandard engineering techniques, procedures, and criteria. The Staff Design Engineer independently devises new approaches for the problems encountered and plans and coordinates the work of others on major engineering projects.
Essential job functions:
Required skills: High-Power design experience for Launch and Exploration Systems.
- 10 years minimum experience in Aerospace Electrical Engineering
- AC and DC Converter/Inverter design experience
- Motor Drive Experience (Brushless DC, Six Step, Induction, etc.)

Must be able to design their own magnetics, emi filter, and power bridge.
- Expectation is all simulations will be done in Moog tools (Cadence allegro and ORCAD suite)

-Write VHDL and do Matlab Simulink would be a bonus
-General Space/DOD knowledge
Scope:
Education: BSEE with 10+ Years Experience
 
Job Number: MB-4285
Job Location: East Aurora, NY
Rate: 80/hr max
Duration: 6 month contract
Input Date: 12/14/2016
Last Updated: 01/12/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural & Payload Design Engineer 4

Description:
Structural & Payload Design Engineer 4
Location: Mesa, AZ
Duration: 12 months


Description:
Skill Code: 647-Structural Design

Job Description:
Exploratory Requisition
Contractor Request for a highly experienced and skilled airframe (AF) design engineer (SMC 647).

Must have experience, knowledge and excellent skills with;
- Catia v5 3D CAD/CAM tool, tool suite with MBDs, IRM, ARMs, CARMs
- BCA-Commercial 787 Enovia PDM tool
- 787 BCA release processes and procedures.

Develops, integrates and document structural platform designs. Develop, maintain and modify structure and AF component designs, using 3-D Catia v5 Computer Aided Design tools, tool suite and other design methods to provide product definition to other engineering groups such as; other designers, stress, ME, Production operations, suppliers and internal/external customers.
Perform, integrate, research, review earlier designs and validate and verify structures and AF components meet requirements and specifications.
Manages supplier, development, test and production activities and coordinates with the supplier to optimize the design and achieve program goals.
Investigates and research released designs, and problems on earlier released designs to ensure they meet requirements. Work under minimal general direction.

Education / Experience:
Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Report to work instructions after obtaining badge:
Additional Comments:
Absolutely must have the following BCA (commercial) skills and experience no exceptions
- 787 CATIA v5
- 787 IVT (Integration Visualization Tool)
- 787 Structure Role in ENOVIA LCA
- 787 REDARS EID

Designer must be very proficient in the following:
- CATIA v5 Complete Model Base Definition
- CATIA v5 FT&A workbench
- CATIA v5 Composite workbench (CWB)
- CATIA v5 Generative Shape Design
- CATIA v5 Part Design
- CATIA v5 Assembly workbench

Must be highly experienced on 787 tools a processes.
- Have designed composite parts based on 787 modeling standards.
- Have designed Installation Requirements Models based on 787 modeling standards.
- Have built component assemblies based on 787 modeling standards.
- Have created release actions, signoff actions and has released parts on the 787 program.
- Have used and feels comfortable working to the 787 Product Definition Data for Review and Approval Checklists.

Must have experience in following items:
- Able to check dataset to the non-technical modeling standards.
- Experienced using auto fastener.
- Excellent understanding of ENOVIA effectivity (creating and cutting).
- Understands the difference in designing in fuselage integration vs designing in a specific section regarding the plug-offset of different (-) dash number Aircraft (787-8, 787-9, 787-10).
- Be able to applying attribute values to ENOVIA parts and documents.
 
Job Number: 22916-1
Job Location: Mesa, Az
Rate: Doe
Per Diem: Yes
Overtime: Possible
Duration: 12 months
Start Date: ASAP
Input Date: 12/28/2016
Last Updated: 01/11/2017
Firm Name: ICONMA LLC
Attention: Holly Herrera
Address: 4620 E 53RD ST
City, State: DAVENPORT, IA 52807
Phone: 312/502-4795
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer with active secret / NASTRAN PATRAN FEA Catia CA

Description:
Job Title: Structural Analysis Engineer
Job Number:156325/0316
Location: Palmdale, CA
Compensation: Rates 85-95/hr
Assignment Length: 12+ month contract
Active Secret security clearance with an investigation less than 5 years ago
Non Exempt

Job Description:
This position requires an Aircraft Stress Analyst to use their technical expertise to perform analysis of aircraft primary and secondary structure. The candidate will have a complete understanding and wide application of technical principles, theories and concepts in the field of aircraft structural analysis. The candidate will be expected to work independently with only general oversight and will be required to provide guidance to junior engineers. The candidate will be responsible for documenting work clearly and concisely.


Mandatory Skills:
--Active Secret security clearance with an investigation less than 5 years ago.--
--Must be a US Citizen or legally authorized to work in US as a permanent resident. This position is located at a facility that requires special access--Bachelor OR Above Degree in a Engineering Technical Discipline--5 or more years experience in the analysis of aircraft structures--Experience performing stress analysis by hand calculations--Experience building complex finite element models for stress analyses--Knowledge of aircraft stress analysis methods and basic structural design criteria--Familiarity with CATIA V5--Understanding of drawing practices, material properties, and manufacturing processes


Desired Skills:
Proficiency with SLIM/TMP VIsion, Microsoft Office suite (Word, PowerPoint, Excel, Outlook), Windows and LINUX/UNIX operating systems, and computer programming experience in FORTRAN, VBA, C/C++ and PERL.




Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
PATRAN Proficiency in FEA pre-processing software PATRAN 4-5 Years Yes
CATIA V5 Proficiency in CAD software CATIA V5. 0-3 Years No
NASTRAN Proficiency in FEA solver NASTRAN 4-5 Years Yes
Stress Hand Calcs Proficiency in Stress analysis using hand calculations 4-5 Years Yes
 
Job Number: DW-0316
Job Location: Palmdale, CA
Rate: 85-95/hr max
Duration: 12 month contract
Input Date: 02/06/2017
Last Updated: 02/21/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design with active secret / Catia V5 URGENT CA

Description:
Job Title: Structural Design
Job Number:156326/0317
Location: Palmdale, CA
Compensation: Rates 65-75/hr
Assignment Length: 10+ month contract
Active Secret Clearance with investigation less than five years ago
Non Exempt
(Start date in March 2017 after obtaining Special Program Clearance)



Job Description:
Design of structural detail parts, assemblies and installations, as well as, systems installations for aircraft. Engineer shall be responsible for development of layouts, preparation of engineering drawings, planning, scheduling, and coordination of activities of assigned subordinate engineers, and support of manufacturing operations and customers in resolving technical problems related to the aircraft structure and systems. Candidate must be able to coordinate efforts with little or no supervision across a wide range of functional organizations, such as Planning, Tooling, Stress, M&P, R&M, Material, Flight Sciences, Test, Manufacturing, and other Design IPTs to ensure that designs meet customer and derived requirements. Candidate must have aerospace design experience with knowledge of configuration management techniques, drafting/drawing conventions, and aerospace specifications and procedures.


Mandatory Skills:
--Active Secret security clearance with an investigation less than 5 years ago.--Must be a US Citizen or legally authorized to work in US as a permanent resident. This position is located at a facility that requires special access--Bachelor OR Above Degree in a Engineering Technical Discipline--5 or more years experience in the analysis of aircraft structures--Proficient with CATIA V5--Understanding of drawing practices, material properties, and manufacturing processes


Desired Skills:
Proficiency with Microsoft Office suite (Word, PowerPoint, Excel, Outlook), Windows

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
CATIA V5 Proficiency in CAD software CATIA V5. 4-5 Years Yes
Aircraft Structural Design Proficient with aircraft structural design of composite and metallic parts 4-5 Years Yes
 
Job Number: DW-0317
Job Location: Palmdale, CA
Rate: 65-75/hr max
Duration: 10 months +
Input Date: 03/13/2017
Last Updated: 03/21/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical CAD Designer

Description:
Seeking a Technical Designer for an opening in Berkeley, MO.

RESPONSIBILITIES:
Unigraphics, Structural Design, Technical Design.
Uses manual or Computer Aided Design (CAD) tools, to develop and maintain mechanical/structural engineering product definition. Prepares design layouts and modifies existing designs to satisfy customer and production requirements. Assists in the development of product definition based on applicable standards, requirements and design parameters. Develops statements of work, including design requirements, cost and schedule estimates. Coordinates and develops work transfer packages. Contributes to the integration of product definition across internal and external business partners to provide a functional end-product. Investigates and resolves moderately-complex manufacturing process or engineering related issues. Verifies accuracy of non-technical data produced by others. Supports development of new processes by providing input on detailed aspects of the process. Mentors less experienced personnel. Works under general direction.

EDUCATION:
Accredited AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.

FULL TIME/1ST SHIFT
WORK HOURS: 7:00 AM - 3:30 PM
 
Job Number: 161332
Job Location: Berkeley, MO
Rate: $34.67
Duration: 6 Months
Start Date: ASAP
Input Date: 01/03/2017
Firm Name: CHIPTON ROSS
Attention: Debbie Aubert
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Designer

Description:
Uses manual or Computer Aided Design (CAD) tools (UG/NX preferred) , to develop and maintain mechanical/structural engineering product definition. Prepares design layouts and modifies existing designs to satisfy customer and production requirements. Assists in the development of product definition based on applicable standards, requirements and design parameters. Develops statements of work, including design requirements, cost and schedule estimates. Coordinates and develops work transfer packages. Contributes to the integration of product definition across internal and external business partners to provide a functional end-product. Investigates and resolves moderately-complex manufacturing process or engineering related issues. Verifies accuracy of non-technical data produced by others. Supports development of new processes by providing input on detailed aspects of the process. Mentors less experienced personnel. Works under general direction.

AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience. This position requires an active (or the ability to obtain) U.S. Security Clearance, for which the U.S. Government requires U.S. Citizenship. Must be US Person for purposes of Export Compliance.
 
Job Number: 36750
Job Location: MO
Rate: 33.50/hour
Per Diem: split
Overtime: possible
Duration: 6 months
Start Date: asap
Input Date: 01/30/2017
Last Updated: 02/07/2017
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Erica Price
Address: WESTRIDGE OFFICE PARK
2646 HIGHWAY 109 STE 207

City, State: WILDWOOD, MO 63040
Phone: 636/438-0312
800 Phone: 866/277-3343
Fax Phone: 636/220-8284
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Designer III (MO) UNIGRAPHICS

Description:
Uses manual or Computer Aided Design (CAD) tools, to develop and maintain mechanical/structural engineering product definition. Prepares design layouts and modifies existing designs to satisfy customer and production requirements. Assists in the development of product definition based on applicable standards, requirements and design parameters. Develops statements of work, including design requirements, cost and schedule estimates. Coordinates and develops work transfer packages. Contributes to the integration of product definition across internal and external business partners to provide a functional end-product. Investigates and resolves moderately-complex manufacturing process or engineering related issues. Verifies accuracy of non-technical data produced by others. Supports development of new processes by providing input on detailed aspects of the process. Mentors less experienced personnel.

AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.
 
Job Number: DesignMO
Job Location: Berkeley, MO
Rate: up to $34/hour DOE
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 01/09/2017
Last Updated: 01/20/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Service Librarian - 3 CA

Description:
Technical Service Librarian - 3 (Job Number: 16027697)

Number of Openings: 1

Location(s): United States-California-Manhattan Beach


Shift: 1st Shift

Target Start Date: Dec 5, 2016

Pay Rate: $40 to $45/hr

Work Schedule: 9/80

Duration of Assignment: Up to 1 year

Position Summary / Responsibilities
Determines types of technical literature searches and sources of information to satisfy the scientific information needs of researchers and staff within the company. Conducts searches of technical literature, analyzes and evaluates data, extracts pertinent information, prepares information abstracts and bibliographies of material searched. Maintains extensive knowledge of literature resources and continuous contacts with local, national, and international information centers and agencies. Maintains and improves information retrieval capabilities. Assists in the selection of literature for inclusion in the library's collection and may translate foreign technical literature. Keeps abreast of developments in areas of interest to the company and periodically consults with researchers and other information users to ensure maximum usefulness and service.


Basic Qualifications:

· Associate of Science Degree in Information Technology, Engineering, or a related technical discipline plus 6 years of experience.
· 6,000+ hours in the use of PTC Creo version 2 (or higher) and Intralink version 10 (or higher)
· Experience in change control procedures and processes
· Experience with Microsoft Office software 2010
· Solid interpersonal and communication skills
· Good organizational and problem solving skills with an ability to adapt quickly to changing requirements


Preferred Qualifications:

· Knowledge and some design experience of electronic parts and assemblies
· Knowledge of government project and business rhythms
· Experience with Cadence Virtuoso version 5.1 (or higher)
 
Job Number: MB-16027697
Job Location: Manhattan Beach, CA
Rate: 45/hr max
Duration: 12 month contract
Input Date: 12/28/2016
Last Updated: 01/12/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Writer

Description:
Technical Writer
UNIQUE SKILLS 1. Candidate should have extensive experience developing new and making revisions to Instructions for Continued Airworthiness (ICA) procedures. Experience should include, but not limited to, on-aircraft field level maintenance and inspection procedures, wire diagram and/or standard wire practice manual content from supplier and engineering data 2. Experience with ENOVIA SmarTeam or similar Product Lifecycle Management (PLM) database products strong desire 3. Familiarization with CATIA three-dimensional (3D) modeling and two-dimensional (2D) CAD standards, format, and 3D/2D software products 4. 'Hands-on' experience or working knowledge of aircraft inspection programs, aviation regulations, aircraft system content organization and OEM technical manuals development preferred, as a minimum candidate should possess knowledge of the MSG-3 Maintenance Program and ISC Sustaining process 5. Experience with aircraft technical manual content organization and authoring using S1000D spec and SNS, or recent experience of the same using iSpec standards required 6. Familiarization with Electrical Wiring Interconnection System (EWIS) best practices, applicable CFRs and development of related maintenance procedures desired 7. Accustom to working in a fast paced project environment and able to work overtime as required to meet deadlines 8. Understanding of and practical experience with Simplified Technical English, Spec ASD-STE100 and use of STE validation software desired 9. Mentor Graphics Capital Harness Systems (CHS) knowledge a plus

Education and Experience Requirements:
Bachelors degree or equivalent experience in the authoring of technical publications. Four (4) years of Technical Publications writing experience. Advanced knowledge of all aircraft systems methodology.
Responsible (either individually or with other team members) for the writing of major portions of technical publications. Supports the complete workflow process to ensure successful completion of each revision cycle and distribution of technical publications. Complies with established quality processes to ensure accuracy, ease of use and timely delivery of each revision cycle content.

Principal Duties and Responsibilities:

Essential Functions: 1. Write technical publications content as directed. 2. Conduct reviews and analyze technical documents to gain a thorough understanding of how complex systems operate and how they are to be integrated into technical manuals to provide the end user with the level of text and graphics to support the efficient return to service of the aircraft system. 3. Consult with internal, external customers and Engineering to create/revise technical manuals to support the department/corporate operating priorities. 4. Provide input to management on new processes or technology for integration into the technical publications business model. 5. Assist in developing solutions for overcoming the technology/technical issues introduced by outside suppliers for incorporation into existing manuals. 6. Work with management, other departments, and team members in the development of specific project data. 7. Provide liaison with Completion Center, Technical Operations, Production and/or Completion Engineering, Service Center to obtain the necessary approval for technical information prior to its release to customers. 8. Participate with publications team to ensure all internal department workflows and business processes are followed for issues relating to producing and delivering technical publications and associated Computerized Maintenance Program (CMP) data. 9. Work with internal/external customers in the development of specific project requirements of source data to ensure a seamless incorporation of new data in the publications environment.


Other Requirements: 1. At least three (3) years of Standard Graphic Markup Language (SGML) or SGML-related software applications 2. Strong technical writing and communication skills are required. 3. Ability to read and interpret blueprint and Engineering Orders. 4. Must have a thorough knowledge of aircraft tools, test equipment, vendor coding, parts nomenclature, maintenance procedures, and of aircraft equipment and maintenance.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 09/21/2016
Last Updated: 01/20/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Writer

Description:
1. Candidate should have extensive experience developing new and making revisions to Instructions for Continued Airworthiness (ICA) procedures to include but not limited to maintenance and inspection procedures, structure repair, fault isolation, wire diagram and/or parts catalogs from supplier and engineering data 2. Experience with ENOVIA SmarTeam or similar Product Lifecycle Management (PLM) database products strong desire 3. Familiarization with CATIA three-dimensional (3D) modeling and two-dimensional (2D) CAD standards, format, and 3D/2D software products 4. 'Hands-on' experience or working knowledge of aircraft inspection programs, aviation regulations, aircraft system content organization and OEM technical manuals development preferred, as a minimum candidate should possess knowledge of the MSG-3 Maintenance Program and ISC Sustaining process 5. Experience with aircraft technical manual content organization and authoring using S1000D spec and SNS, or recent experience of the same using iSpec standards required 6. Familiarization with Electrical Wiring Interconnection System (EWIS) best practices, applicable CFRs and development of related maintenance procedures desired 7. Accustom to working in a fast paced project environment and able to work overtime as required to meet deadlines 8. Understanding of and practical experience with Simplified Technical English, Spec ASD-STE100 and use of STE validation software desired 9. Mentor Graphics Capital Harness Systems (CHS) knowledge a plus

Education and Experience Requirements:
Bachelors degree or equivalent experience in the authoring of technical publications. Four (4) years of Technical Publications writing experience. Advanced knowledge of all aircraft systems methodology. See Other Requirements in Job Description.

Position Purpose:
Responsible (either individually or with other team members) for the writing of major portions of technical publications. Supports the complete workflow process to ensure successful completion of each revision cycle and distribution of technical publications. Complies with established quality processes to ensure accuracy, ease of use and timely delivery of each revision cycle content.

Principal Duties and Responsibilities:

Essential Functions: 1. Write technical publications content as directed. 2. Conduct reviews and analyze technical documents to gain a thorough understanding of how complex systems operate and how they are to be integrated into technical manuals to provide the end user with the level of text and graphics to support the efficient return to service of the aircraft system. 3. Consult with internal, external customers and Engineering to create/revise technical manuals to support the department/corporate operating priorities. 4. Provide input to management on new processes or technology for integration into the technical publications business model. 5. Assist in developing solutions for overcoming the technology/technical issues introduced by outside suppliers for incorporation into existing manuals. 6. Work with management, other departments, and team members in the development of specific project data. 7. Provide liaison with Completion Center, Technical Operations, Production and/or Completion Engineering, Service Center to obtain the necessary approval for technical information prior to its release to customers. 8. Participate with publications team to ensure all internal department workflows and business processes are followed for issues relating to producing and delivering technical publications and associated Computerized Maintenance Program (CMP) data. 9. Work with internal/external customers in the development of specific project requirements of source data to ensure a seamless incorporation of new data in the publications environment. .

Other Requirements: 1. At least three (3) years of Standard Graphic Markup Language (SGML) or SGML-related software applications 2. Strong technical writing and communication skills are required. 3. Ability to read and interpret blueprint and Engineering Orders. 4. Must have a thorough knowledge of aircraft tools, test equipment, vendor coding, parts nomenclature, maintenance procedures, and of aircraft equipment and maintenance.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 07/18/2016
Last Updated: 01/20/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design Eng II

Description:
EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor’s degree in Mechanical Engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Three (3) years drafting/design experience to include documented experience in a tool shop or machine shop environment. Three (3) years Tool Design experience. One (1) year CAD/CATIA experience.

POSITION PURPOSE
Performs engineering work related to the design of tools and equipment used in the manufacture and support of Gulfstream aircraft.

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Under minimal supervision, design, tolerance and annotate tooling in 3D CAD environment that will be used in the manufacture and support of Gulfstream aircraft.
2. Collaborate with engineering, manufacturing engineering and operations to determine optimal manufacturing procedures.
3. Present design concepts to a design review team composed of representatives from manufacturing engineering, industrial engineering, operations, safety and other Tool Design Engineers.
4. Review and check Tool Designs, as required, to ensure conformance to specifications, intent, methods and procedures.
5. Write procedures on use of tools.

ADDITIONAL FUNCTIONS
1. Actively works to improve daily processes, and ensures all work meets customer requirements.
2. Assist Tool shop as needed, during Periodic and Conformity Inspections.
3. Assist in formulating Tool Design policies, procedures, and specifications as required.
4. Perform other duties as required.

OTHER REQUIREMENTS
1. Must possess strong CAD/CATIA modeling skills and have a clear understanding of GD&T.
2. Demonstrated knowledge of materials, material strengths, heat treat method and uses.
3. Ability to conceptualize the following with minimal supervision, assembly tooling, composite tooling, machine tooling, handling equipment, and scaffolding.
 
Job Number: 16-644-85042
Job Location: Southeast
Rate: $55.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 03/20/2017
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design Engineer II

Description:
Tool Design Engineer II

Location: Savannah, GA
Rate: $55.00/HR
Long Term contract
4x10


Education and Experience Requirements:
- Bachelors degree in Mechanical Engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
- Three (3) years drafting/design experience to include documented experience in a tool shop or machine shop environment.
- Three (3) years Tool Design experience.
- One (1) year CAD/CATIA experience.


Position Purpose:
Performs engineering work related to the design of tools and equipment used in the manufacture and support of Gulfstream aircraft.

Principal Duties and Responsibilities:
Essential Functions: 1. Under minimal supervision, design, tolerance and annotate tooling in 3D CAD environment that will be used in the manufacture and support of Gulfstream aircraft. 2. Collaborate with engineering, manufacturing engineering and operations to determine optimal manufacturing procedures. 3. Present design concepts to a design review team composed of representatives from manufacturing engineering, industrial engineering, operations, safety and other Tool Design Engineers. 4. Review and check Tool Designs, as required, to ensure conformance to specifications, intent, methods and procedures. 5. Write procedures on use of tools.

Additional Functions: 1. Actively works to improve daily processes, and ensures all work meets customer requirements. 2. Assist Tool shop as needed, during Periodic and Conformity Inspections. 3. Assist in formulating Tool Design policies, procedures, and specifications as required. 4. Perform other duties as required.

Other Requirements: 1. Must possess strong CAD/CATIA modeling skills and have a clear understanding of GD&T. 2. Demonstrated knowledge of materials, material strengths, heat treat method and uses. 3. Ability to conceptualize the following with minimal supervision. assembly tooling, composite tooling, machine tooling, handling equipment, and scaffolding.
 
Job Number: 6754
Job Location: Savannah, GA
Rate: $55.00/HR
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 02/07/2017
Last Updated: 04/25/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design in Palmdale, CA #0258AS

Description:
Recruiter to contact: Adam Salazar
Job title: Tool Design
Location: Palmdale, CA
Compensation: DOE
Assignment Length: 12 month contract
Security Clearance: Secret (Prime Contract:, Can start w/o clearance: No, Interim Clearance Sufficient: Yes) Non exempt
1st shift

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
Tool Engineer 11 Years + Yes

Description:
• Candidate will be responsible for the design, maintenance, and repair of standard tools for the Palmdale site.

• Responsible for working with Tool Design and Engineering personnel on producibility issues related to standard tools.

• Individual must have knowledge of pneumatic tools, powerfeed motors, drilling, grinding, machining, and fastener installation.

• Responsible for evaluating ergonomic tooling.

• He/she will be required to create quick solutions to manufacturing problems and modify standard tools to fit unique area/program requirements.

• Responsible for providing tools on startup programs to include cutting tools, motors, fastener installation tooling and gauging.

Skill/Experience/Education
Mandatory:
Working knowledge of the Standard Tools which includes any of the following: sheet metal, assembly tooling, hand tools, machine shop tools, sheet metal fabrication tools, plumbing cable/electrical tooling, and quality control tooling.

-Knowledge and experience with any of the following: pneumatic tools, powerfeed motors, drilling, grinding, machining, and fastener installation.

-Experience with either of the following CAD Software programs: Catia, SolidWorks, Or Pro/E -Must be a US Citizen. This position is located at a facility that requires special access.

Desired:
Manufacturing Floor experience
-Ability to design and apply tooling concepts to repair and modify aircraft assemblies.
-Ability to think out of the box and modify standard tools to fit unique requirements.
 
Job Number: #0258AS
Job Location: Palmdale, CA
Rate: DOE
Duration: 12 Months
Start Date: ASAP
Input Date: 01/06/2017
Last Updated: 01/17/2017
Firm Name: MIDCOM CORPORATION
Attention: Adam Salazar
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design in Palmdale, CA #0258AS

Description:
Recruiter to contact: Adam Salazar
Job title: Tool Design
Location: Palmdale, CA
Compensation: DOE
Assignment Length: 12 month contract
Security Clearance: Secret (Prime Contract:, Can start w/o clearance: No, Interim Clearance Sufficient: Yes) Non exempt
1st shift

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
Tool Engineer 11 Years + Yes

Description:
• Candidate will be responsible for the design, maintenance, and repair of standard tools for the Palmdale site.

• Responsible for working with Tool Design and Engineering personnel on producibility issues related to standard tools.

• Individual must have knowledge of pneumatic tools, powerfeed motors, drilling, grinding, machining, and fastener installation.

• Responsible for evaluating ergonomic tooling.

• He/she will be required to create quick solutions to manufacturing problems and modify standard tools to fit unique area/program requirements.

• Responsible for providing tools on startup programs to include cutting tools, motors, fastener installation tooling and gauging.

Skill/Experience/Education
Mandatory:
Working knowledge of the Standard Tools which includes any of the following: sheet metal, assembly tooling, hand tools, machine shop tools, sheet metal fabrication tools, plumbing cable/electrical tooling, and quality control tooling.

-Knowledge and experience with any of the following: pneumatic tools, powerfeed motors, drilling, grinding, machining, and fastener installation.

-Experience with either of the following CAD Software programs: Catia, SolidWorks, Or Pro/E -Must be a US Citizen. This position is located at a facility that requires special access.

Desired:
Manufacturing Floor experience
-Ability to design and apply tooling concepts to repair and modify aircraft assemblies.
-Ability to think out of the box and modify standard tools to fit unique requirements.
 
Job Number: #0258AS
Job Location: Palmdale, CA
Rate: DOE
Duration: 12 Months
Start Date: ASAP
Input Date: 01/06/2017
Last Updated: 01/11/2017
Firm Name: MIDCOM CORPORATION
Attention: Adam Salazar
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design with active secret / Catia, SolidWorks, Or Pro/E CA

Description:
Lockheed Martin Aero 0258
Job title: Tool Design
Job Number: 158189
Location: Palmdale, CA
Compensation: 50-70/hr(DOE)
Assignment Length: 12 month contract
Security Clearance Secret (Prime Contract:, Can start w/o clearance:No, Interim Clearance Sufficient:Yes)
Non exempt
1st shift

Description:

Candidate will be responsible for the design, maintenance, and repair of standard tools for the Palmdale site. Responsible for working with Tool Design and Engineering personnel on producibility issues related to standard tools. Individual must have knowledge of pneumatic tools, powerfeed motors, drilling, grinding, machining, and fastener installation. Responsible for evaluating ergonomic tooling. He/she will be required to create quick solutions to manufacturing problems and modify standard tools to fit unique area/program requirements. Responsible for providing tools on startup programs to include cutting tools, motors, fastener installation tooling and gauging.

Skill/Experience/Education
Mandatory:

Working knowledge of the Standard Tools which includes any of the following: sheet metal, assembly tooling, hand tools, machine shop tools, sheet metal fabrication tools, plumbing cable/electrical tooling, and quality control tooling. -Knowledge and experience with any of the following: pneumatic tools, powerfeed motors, drilling, grinding, machining, and fastener installation. -Experience with either of the following CAD Software programs: Catia, SolidWorks, Or Pro/E -Must be a US Citizen. This position is located at a facility that requires special access.
Desired:

Manufacturing Floor experience -Ability to design and apply tooling concepts to repair and modify aircraft assemblies. -Ability to think out of the box and modify standard tools to fit unique requirements.

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
Tool Engineer 11 Years + Yes
 
Job Number: SW-0258
Job Location: Palmdale, CA
Rate: 50-70/hr DOE
Duration: 12 month contract
Input Date: 01/13/2017
Last Updated: 01/17/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Designer

Description:
.
Tool Designer under minimal supervision, design, tolerance and annotate tooling in 3D CAD environment that will be used in the manufacture and support of aircraft. Collaborate with engineering, manufacturing engineering and operations to determine optimal manufacturing procedures. Present design concepts to a design review team composed of representatives from manufacturing engineering, industrial engineering, operations, safety and other Tool Design Engineers. Review and check Tool Designs, as required, to ensure conformance to specifications, intent, methods and procedures. Write procedures on use of tools.


Must possess strong CAD/CATIA modeling skills and have a clear understanding of GD&T. Demonstrated knowledge of materials, material strengths, heat treat method and uses. Ability to conceptualize the following with minimal supervision. assembly tooling, composite tooling, machine tooling, handling equipment, and scaffolding.

Bachelor’s degree in Mechanical Engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Three (3) years drafting/design experience to include documented experience in a tool shop or machine shop environment. Three (3) years Tool Design experience. One (1) year CAD/CATIA experience.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/07/2016
Last Updated: 01/20/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Designer

Description:
Tool Designer
The Tool Designer performs standard tooling design assignments usually representing a significant portion of a larger project. The Tool Designer will utilize engineering techniques and tools to support production, solve manufacturing issues and make design recommendations.

JOB RESPONSIBILITIES:
Design tooling, jigs, fixtures and templates to support all aspects of production.
Prepare appropriate documentation for assigned projects.
Specify and order parts and materials as required to support assigned projects.
Ensure successful completion of assigned projects within the budgeted time and cost constraints.
Participate in defining engineering approaches, and in planning and scheduling work.
Provide technical support to the shop floor and other departments as necessary to resolve production and/or tooling issues.
Participate in engineering design reviews to identify tooling requirements early in the product design phase.
Interface with engineering and shop personnel as required, and studies 3D models, product specifications, engineering blueprints, tool requests and shop data to determine the most cost effective solution for production issues.
Apply standard engineering design principles, techniques and mathematics to develop tooling configurations and designs.
Select and specify standard items such as hardware and materials to incorporate into tooling designs.
Create preliminary sketches, CAD models, layouts and detail drawings of tooling with 3D solid modeling CAD programs.
Conduct and/or participate in tooling project design reviews as required.
Provide production floor, machine shop and assembly support for technical matters relating to tooling fabrication and use.
Modify tool designs as needed based on input from manufacturing engineering, production floor supervision and end users to improve tool life and/or performance.
Follow assigned projects to a successful conclusion to ensure usable tooling and customer satisfaction.

Minimum Qualifications:
Bachelor's degree from a four-year accredited university or 5 years of applicable experience working in a manufacturing environment or equivalent combination of education and experience
2 years of Tool Design in a manufacturing environment


Preferred Qualifications:
Bachelor's degree (BA/BS) in Engineering field from an accredited four-year college or university
Knowledge of aerospace industry and related standards and codes 
Experience working with Unigraphics
Ability to define problems, collect data, establish facts, and draw valid conclusions
Ability to interpret an extensive variety of technical instructions and deal with several abstract and concrete variables
An understanding of basic machine shop and fabrication shop practices including the limitations of standard equipment and processes
Working knowledge of geometric dimensioning and tolerance
Excellent verbal and written communication skills
Proficient in Microsoft Office Applications
Proficient in 3D solid modeling CAD programs Proficient in drafting and detailing skills
 
Job Location: Tucson, AZ
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 08/08/2016
Last Updated: 01/20/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Designer II

Description:
Under minimal supervision, design complex tools and equipment used in the manufacturing and support of company products.

Principal Duties and Responsibilities:

1. Design and draft tooling and equipment used to manufacture and support of company products.
2. Perform liaison with Tooling, Engineering and production as required.
3. Review and check Tool Designs, as required, to ensure conformance to specifications, original intent, proper methods and procedures.
4. Write procedures on use of tools.

Additional Functions:

1. Assist Tool shop as needed, during Periodic and Conformity Inspections.
2. Assist in formulating Tool Design policies, procedures, and specifications as required.
3. Perform other duties as required.

Other Requirements:

1. Must possess strong drafting, math, and technical writing skills.
2. Demonstrated knowledge of materials, material strengths and uses, Tooling purchased items, and heat treat methods/specifications of materials.
3. Ability to conceptualize the following with minimal supervision. Assembly tooling, Composite tooling, Machine tooling, handling equipment, and scaffolding.

Experience/Education Required

Bachelor�s degree in Mechanical Engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.

Three (3) years drafting/design experience to include documented experience in a tool shop or machine shop environment. Three (3) years Tool Design experience. One (1) year CAD

Unique skills

  • CATIA V5
  • SmarTeam or Enovia
  • Experience Designing Major Assembly fixtures
     
  • Job Number: 24-160
    Job Location: Savannah, GA
    Rate: 55/hr
    Per Diem: YES
    Overtime: YES
    Duration: 1 year plus
    Start Date: ASAP
    Input Date: 02/22/2017
    Last Updated: 06/21/2017
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Tool Designer III

    Description:
    This position will be responsible for the development of conceptualized tooling solutions and creation of CAD models to support the tooling requirements for low pressure ECS ducting at an off-site location. The Tool Design Engineer III will utilize extensive knowledge and experience to plan and accomplish goals. The incumbent in this position will develop technical solutions to problems with a high level of complexity and will exercise considerable latitude in determining the technical objectives and methodology for the tooling. This will be accomplished working closely with a Manufacturing Engineer, employed by the customer. The Tool Design Engineer III will guide the successful completion of the designs and may function in a project leadership role. In addition, the Tool Design Engineer III may represent the organization as the prime technical contact for contracts and projects. This individual will work both independently as well as part of a team to complete specific projects related to the design and development of tooling solutions. Specific duties and responsibilities include but are not limited to the following:

    Essential Duties and Responsibilities:
    Responsible for the design of tooling to manufacture ECS ducting components and assembly fixtures.
    Evaluates requirements to develop tool concepts.
    Develops concepts for complex tools and can present alternative concepts.
    Ability to manipulate data sets such as conceptual tool design models and deliverable designs.
    Will create and modify tool designs.
    Participates in tool/equipment try-outs to ensure requirements have been satisfied.
    Evaluates and develops/revises preventative maintenance requirements for tools.
    Responds to requests for review and evaluates ability to produce proposed design with respect to forming, machining, and finishing by using in-house or supplier provided processes to support customer specifications.
    Assists in determining methodology for assembly of components and evaluates part-features required to support the proposed product.
    Investigates, develops, and verifies feasibility of tool concepts.
    Incorporates safety, ergonomic, and regulatory requirements in tool designs.
    Works well with minimal supervision.
    Performs other duties as required.

    Qualifications & Skills Requirements:
    Bachelor’s degree in a related engineering field is preferred and a minimum of 10+ years of tooling experience in the Aerospace Industry or related field or the equivalent in training, education and experience.
    Requires advanced knowledge of CATIA V5 CAD software as well as MS Office products.

    Physical Requirements: Individual must be able to sit for extended periods of time, working at a desk and/or attending meetings. May occasionally require employee to stand and/or walk and occasionally lift and/or move up to 10 pounds. Will need to be able to move throughout the office and talk/hear or otherwise communicate with other employees and management. Work will be performed in an office environment. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties of the job

    LMI Aerospace Engineering Services is an E-Verify EOE/Minorities/Females/Disability/Vets employer

    Click the link and follow instructions on HOW TO APPLY: LMI ENGINEERING JOB OPPORTUNITIES
     

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Tool Designers - Active Secret

    Description:
    **Must have Active Secret Clearance
    Experience with either of the following CAD Software programs: Catia, SolidWorks, Or Pro/E
    Candidate will be responsible for the design, maintenance, and repair of standard tools.
    Working knowledge of the Standard Tools which includes any of the following: sheet metal, assembly tooling, hand tools, machine shop tools, sheet metal fabrication tools, plumbing cable/electrical tooling, and quality control tooling.
     
    Job Number: Lock-CA
    Job Location: Palmdale, CA
    Rate: $50.00-$65.00/hour
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 01/06/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Mary Ann McCarthy
    Address: 1215 FERN RIDGE PKWY STE 231
    City, State: ST LOUIS, MO 63141
    Phone: 314/628-9143
    800 Phone: 800/472-3737
    Fax Phone: 314/628-9485
    Website: www.pdstech.com

    Back to Advanced Job Search