Job Search Results

864 listings were found that matched your search words: Keywords: Electrical ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2024/03/28 Thursday 11:09AM Pacific Time by ContractJobHunter. )

Listings 1 - 864

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace - Air Systems ECS

Description:
Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEMs. They have a growing team of aerospace engineers, technicians, mechanics, and specialist consultants that support multiple programs in the aerospace industry.
They are seeking an Aerospace engineer with Avionics systems experience to join the team. The ideal candidate will possess aircraft certification experience with a specialty in electrical systems.
Essential Functions:
Coordinate system test and certification requirements.
Support flight test and ground test activities.
Analyze test data and evaluate system operation.
Prepare test reports.
Domestic and occasional international travel is required.
Desired Qualifications:
Experience in as many of the following as possible:
o Navigation (VOR, DME), FMS, TCAS, TAWS, Communications (VHF etc), ADS (Air Data System), EICAS, Autopilot, AFCS
5+ years relevant work experience related to avionics systems integration and certification.
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
Ability to represent the client professionally and positively during client interactions and meetings.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
 
Job Number: ECS/SEA
Job Location: Seattle, WA
Rate: open
Per Diem: possible
Duration: lt
Start Date: open
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Dawn Bergau
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace - Avionics Engineer

Description:
Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.
The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations.
The individuals in this role will work with engineers to design and install instrumentation to support the collection of flight test data. The ideal candidate is self-motivated, detail oriented, and knowledgeable on instrumentation theory.
The ideal candidate will possess aircraft certification experience with a specialty in electrical systems and 5 years of relevant work experience related to avionics systems integration and certification.

Responsibilities of the Aerospace Avionics Engineers

● Coordinate system test and certification requirements.
● Support flight test and ground test activities.
● Analyze test data and evaluate system operation.
● Prepare test reports.
● Domestic and occasional international travel is required.

Requirements of the Aerospace Avionics Engineers

● Experience in Navigation (VOR, DME), FMS, TCAS, TAWS, Communications (VHF etc), ADS (Air Data System), EICAS, Autopilot, AFCS
● 5+ years relevant work experience related to avionics systems integration and certification.
● Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
● Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
 
Job Location: Seattle, WA
Rate: open
Per Diem: possible
Duration: LT
Start Date: open
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Dawn Bergau
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace - Cabin Safety Engineer

Description:
Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.
The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations

Seeking direct and contract engineers to join the team in Seattle with at least five years� experience with cabin safety engineering, to include:
� Flammability
� Emergency lighting
� Escape slides
� Seats crash testing
� Exit row indications and placards
� Emergency exit doors
Essential functions:
� System requirements verification and validation.
� Flight test and ground test specifications.
� Support flight test and ground test activities.
� Analyze test data and evaluate system operation.
� Prepare test reports.
Desired Qualifications:
� Experience with FAA Part 25 or Part 23 certification, flight and ground test activities.
� Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
� A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
� Ability to represent the client professionally and positively during client interactions and meetings.
� Bachelor degree in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
 
Job Number: Cab/Fl
Job Location: Seattle, WA
Per Diem: possible
Overtime: Yes
Duration: LT
Start Date: open
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Air Systems Engineer (ECS)

Description:
Our client is seeking an Aerospace engineer with Air Systems/ECS experience to join the team in Seattle, WA. The ideal candidate will possess aircraft certification experience with a specialty in environmental control systems.

Essential Functions:
� Coordinate system test and certification requirements.
� Author flight test and ground test specifications.
� Support flight test and ground test activities.
� Analyze test data and evaluate system operation.
� Prepare test reports.
� Domestic and occasional international travel is required.
Desired Qualifications:
� 5+ years� experience with CPCS (Cabin pressurization control system), flow balancing, smoke penetration and detection, valve and control logic, failure cases, OHD (overheat detection), cabin pull-up/pull-down, hot and cold weather deployments
� Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
� Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
� Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
� A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
� Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
� Ability to represent the client professionally and positively during client interactions and meetings.
� Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
� Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

Candidates must have legal authorization to work in the United States, Canada or Mexico
 
Job Number: ECS/SEA
Job Location: Seattle, WA
Per Diem: possible
Overtime: possible
Duration: lt
Start Date: asap
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Dawn Bergau
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Avionics Engineer

Description:
Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. They have a growing team of aerospace engineers, technicians, mechanics, and specialist consultants that support multiple programs in the aerospace industry.

We are seeking an Aerospace engineer with avionics experience to join the team in Seattle, WA. The ideal candidate will possess aircraft certification experience with a specialty in avionics systems.

Essential Functions:

Coordinate system test and certification requirements.
Author flight test and ground test specifications.
Support flight test and ground test activities.
Analyze test data and evaluate system operation.
Prepare test reports.
Domestic and occasional international travel is required.
Desired Qualifications:

5+ years relevant work experience related to avionic/electrical systems integration and certification. Should include experience with some of the following: Navigation (VOR, DME), FMS, TCAS, TAWS, Communications (VHF etc), Displays, OMS, V&V, Safety, ADS (Air Data System), EICAS, Autopilot, AFCS
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
Ability to represent the client professionally and positively during client interactions and meetings.
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
 
Job Number: Seattle
Job Location: Seattle, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: Full time and LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineer, Electrical

Description:
Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations

We are seeking Electrical engineers with systems experience to join the team in Seattle, WA. The ideal candidate will possess aircraft certification experience with a specialty in electrical systems.

Essential Functions:
� Aerospace Electrical Engineer shall coordinate system test and certification requirements.
� Support flight test and ground test activities.
� Analyze test data and evaluate system operation.
� Prepare test reports.
� Domestic and occasional international travel is required.

Desired Qualifications:
� Electrical Engineer will have a deep understanding of power distribution system, failure cases, load shedding, electrical power management
� Understanding of EWIS and wiring a plus
� 5+ years relevant work experience related to electrical systems integration and certification. Should include experience with power generation, control, distribution and integration with the aircraft.
� Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
� Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
� Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
� A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
� Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.

If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.
Candidates must have legal authorization to work in the United States, Canada or Mexico
 
Job Number: Elec/Orl
Job Location: Orlando, FL
Per Diem: possible
Overtime: possible
Duration: lt
Start Date: asap
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineer, Electrical

Description:
Essential Functions:
Coordation experience with a specialty in electrical systems.inate system test and certification requirements.
Support flight test and ground test activities.
Analyze test data and evaluate system operation.
Prepare test reports.
Domestic and occasional international travel is required.
Desired Qualifications:
Understanding of power distribution system, failure cases, load shedding, electrical power management
Understanding of EWIS and wiring a plus
5+ years relevant work experience related to electrical systems integration and certification. Should include experience with power generation, control, distribution and integration with the aircraft.
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
Ability to represent the client professionally and positively during client interactions and meetings.
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.

If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

Candidates must have legal authorization to work in the United States, Canada or Mexico
 
Job Number: Elect/Sea
Job Location: seattle, wa
Per Diem: possible
Overtime: possible
Duration: LT
Start Date: asap
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineer, Electrical

Description:
Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEMs. They have a growing team of aerospace engineers, technicians, mechanics, and specialist consultants that support multiple programs in the aerospace industry.
They are seeking an Aerospace engineer with electrical systems experience to join the team. The ideal candidate will possess aircraft certification experience with a specialty in electrical systems.
Essential Functions:
Coordinate system test and certification requirements.
Support flight test and ground test activities.
Analyze test data and evaluate system operation.
Prepare test reports.
Domestic and occasional international travel is required.
Desired Qualifications:
Understanding of power distribution system, failure cases, load shedding, electrical power management
Understanding of EWIS and wiring a plus
5+ years relevant work experience related to electrical systems integration and certification. Should include experience with power generation, control, distribution and integration with the aircraft.
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
Ability to represent the client professionally and positively during client interactions and meetings.
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
 
Job Number: LA
Job Location: Fort Worth, TX
Per Diem: possible
Overtime: possible
Duration: LT
Start Date: asap
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Lynn Launer
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Project Engineer

Description:
Aerospace Project Engineer

Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

The strategic purpose of the Test and Evaluation Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations.

Seeking a Project Engineers with Flight Test experience to join the team in Seattle, WA. The ideal candidate will possess 4+ years of experience in one of the following disciplines.
Flight Test Management Software
Flight Test Trouble Shooting Processes
Flight Test Equipment Management / Coordination
Aerospace Project Engineering
Bachelor�s Degree in Software Engineering, Aerospace Engineering, Mechanical Engineering, Project Management or a related subject (or equivalent combination of work and experience).
Four or more years of aerospace and/or project management experience. Flight Test environment preferred, but not required.
If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Candidates must have legal authorization to work in the United States, Canada or Mexico
 
Job Location: Moses Lake, WA
Per Diem: Split possible
Start Date: asap
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Dawn Bergau
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Senior Test Equipment Project Engineer – Contract

Description:
Aerospace Senior Test Equipment Project Engineer – Contract

On behalf of our client, Ingenium is recruiting and evaluating candidates for the position of Senior Test Equipment Project Engineer. Our client is a leading manufacturer of highly complex electromechanical, mechanical, and hydromechanical aerospace components and systems for government and commercial applications.

This is a contract to hire position located in Torrance, CA. Client is open Contract, long term contract or contract to hire.

Must be a US Citizen or Person. No visa or student visa candidates considered.

Principal Responsibilities:

• The functional expertise required for this Sr. Test Equipment Project Engineering position is primarily in the field of Mechanical Engineering with significant experience required in the areas of project management.
• The Senior Test Equipment Project Engineer is a primary motivator and contributor to the analysis, conceptual design, development, and testing of complex control test equipment used on military, commercial and NASA vehicles and equipment.
• Primary concerns are system or component performance and integration, both being achieved within budget and prescribed schedules.
• The incumbent will coordinate the work of drafters, technicians, designers, analysts, manufacturing engineers and others who assist in specific assignments.
• Must frequently solicit the aid and support of others to achieve difficult schedule objectives.
• The incumbent's responsibilities may include the direct supervision of up to four subordinate engineers and/or project or product-engineering technicians.

Experience & Qualifications:

• Prior experience understanding the design, analysis, and development of complex electrohydraulic, electromechanical, or electro pneumatic – servo mechanisms.
• In addition, he/she must have a proven record of successful development programs working as a part of a project team in this field.

Education: Bachelor’s degree in Mechanical Engineering required, an advanced degree preferred

Compensation: Highly competitive with benefits

Employment Criteria: This position includes access or potential access to ITAR technical data. Therefore, candidates will need to verify US Citizenship. No visa or student visa candidates considered.

Ingenium Technologies Corporation is a leading engineering services organization, providing outsourcing, consulting, and talent solutions.

Employment Statement: Ingenium Technologies is an equal opportunity employer and does not discriminate on the basis of race, color, religion, gender, age, national origin, disability, veteran status, sexual orientation, or any other classification protected by federal, state or local law. Proof of eligibility for employment will be required upon employment.

Additional Job Postings: http://www.ingeniumtech.com/jobs/
 
Job Number: 61990
Job Location: Rockford, IL Illinois
Rate: Market rate
Per Diem: no
Overtime: possible
Duration: 6-12 months
Start Date: 3 weeks
Input Date: 11/14/2020
Firm Name: INGENIUM TECHNOLOGY
Attention: David Johnson
Address: 4216 MARAY DR UNIT A1
City, State: ROCKFORD, IL 61107
Phone: 815/315-9273
Fax Phone: 815/399-8804
Website: www.ingeniumtech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Systems Engineer

Description:
Aerospace Test Systems Engineer - Contract

On behalf of our client, Ingenium is recruiting and evaluating candidates for the position of Test Systems Engineer supporting requirements and analysis. Our client is a leading manufacturer of highly complex electromechanical, mechanical, and hydromechanical aerospace components and systems for government and commercial applications.

This is a contract to hire position located in Torrance, CA.
Customer is open to Contract- long term contract or contract to hire.

Aerospace Test Systems Engineer - Contract

On behalf of our client, Ingenium is recruiting and evaluating candidates for the position of Test Systems Engineer supporting requirements and analysis. Our client is a leading manufacturer of highly complex electromechanical, mechanical, and hydromechanical aerospace components and systems for government and commercial applications.

This is a contract to hire position located in Torrance, CA.

Principal Responsibilities:

• The functional expertise required for this Test Requirements and Analysis Engineering Position is primarily in the field of Systems Engineering with significant experience required in the areas of Requirements Definition, Integration, V&V, modeling & simulation & with project management.
• Build a project plan for the successful testing of new products from start to finish.
• Conceptualize and design of automatically controlled mechanical/hydraulic test rigs.
• Primary concerns are system or component performance and integration, both being achieved within budget and prescribed schedules.
• The incumbent will operate either independently or as part of a design/development team, which includes other Department engineers.
• Must frequently solicit aid and support to achieve difficult schedule objectives.
• The incumbent's responsibilities may include the direct supervision of up to four subordinate engineers and/or project or product-engineering technicians.

Experience & Qualifications:

• 5+ years’ experience understanding the design, analysis, and development of complex electro-hydraulic, electro-mechanical, or electro pneumatic – servo mechanisms.
• In addition, he/she must have a proven record of successful development programs working as a part of a project team in this field.

Education: Bachelor’s degree in Mechanical Engineering or related field required

Compensation: Highly competitive with benefits

Employment Criteria: This position includes access or potential access to ITAR technical data. Therefore, candidates will need to verify US Citizenship. No visa or student visa candidates considered.

Ingenium Technologies Corporation is a leading engineering services organization, providing outsourcing, consulting, and talent solutions.

Employment Statement: Ingenium Technologies is an equal opportunity employer and does not discriminate on the basis of race, color, religion, gender, age, national origin, disability, veteran status, sexual orientation, or any other classification protected by federal, state or local law. Proof of eligibility for employment will be required upon employment.

Additional Job Postings: http://www.ingeniumtech.com/jobs/


Principal Responsibilities:

• The functional expertise required for this System Engineer Test Requirements and Analysis Engineering Position is primarily in the field of Systems Engineering with significant experience required in the areas of Requirements Definition, Integration, V&V, modeling & simulation & with project management.
• Build a project plan for the successful testing of new products from start to finish.
• Conceptualize and design of automatically controlled mechanical/hydraulic system test rigs.
• Primary concerns are system or component performance and integration, both being achieved within budget and prescribed schedules.
• The incumbent will operate either independently or as part of a design/development team, which includes other Department engineers.
• Must frequently solicit aid and support to achieve difficult schedule objectives.
• The incumbent's responsibilities may include the direct supervision of up to four subordinate engineers and/or project or product-engineering technicians.

Experience & Qualifications:

• 5+ years’ experience understanding the design, analysis, and development of complex electro-hydraulic, electro-mechanical, or electro pneumatic – servo mechanisms.
• In addition, he/she must have a proven record of successful development programs working as a part of a project team in this field.

Education: Bachelor’s degree in Mechanical Engineering or related field required

Compensation: Highly competitive with benefits

Employment Criteria: This position includes access or potential access to ITAR technical data. Therefore, candidates will need to verify US Citizenship. No visa or student visa candidates considered.

Ingenium Technologies Corporation is a leading engineering services organization, providing outsourcing, consulting, and talent solutions.

Employment Statement: Ingenium Technologies is an equal opportunity employer and does not discriminate on the basis of race, color, religion, gender, age, national origin, disability, veteran status, sexual orientation, or any other classification protected by federal, state or local law. Proof of eligibility for employment will be required upon employment.

Additional Job Postings: http://www.ingeniumtech.com/jobs/
 
Job Number: 61987
Job Location: Rockford, IL Illinois
Rate: Comensurate
Per Diem: no
Overtime: possible
Duration: 6-12 months
Start Date: 3 weeks
Input Date: 11/14/2020
Firm Name: INGENIUM TECHNOLOGY
Attention: David Johnson
Address: 4216 MARAY DR UNIT A1
City, State: ROCKFORD, IL 61107
Phone: 815/315-9273
Fax Phone: 815/399-8804
Website: www.ingeniumtech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Test Equipment Engineer - Contract

Description:
Aerospace Test Equipment Engineer - Contract

On behalf of our client, Ingenium is recruiting and evaluating candidates for the position of Test Equipment Engineer. Our client is a leading manufacturer of highly complex electromechanical, mechanical, and hydro mechanical aerospace components and systems for government and commercial applications.

Must be a US Citizen or US Person to be considered. No visa or student visa candidates condescended

This is a contract to hire position located in Torrance, CA. Customer is open to Contract- Long term contract or contract to hire.

Principal Responsibilities:

-Primarily in the field of Electrical Engineering with significant experience required in the areas of position control and power electronics and project management.

Project management, Test Equipment design, fabrication and verification are key experiences needed.

-Primary motivator and contributor to the analysis, conceptual design, development, and testing of complex control test equipment used on military, commercial and NASA vehicles and equipment.
-The incumbent will operate either independently or as part of a design/development team, which includes other Department engineers.- Primary concerns are system or component performance and integration, both being achieved within budget and prescribed schedules.
-The incumbent will coordinate the work of drafters, technicians, designers, analysts, manufacturing engineers and others who assist in specific assignments.
-Responsible for communicating with the involved Division support personnel, keeping them informed of progress and educating them on the operation and performance of the design.
-Must frequently solicit the aid and support of others to achieve difficult schedule objectives.
-The incumbent's responsibilities may include the direct supervision of up to four subordinate engineers and/or project or product-engineering technicians.

Experience & Qualifications:

-Prior experience understanding the design, analysis, and development of complex electro-hydraulic, electro-mechanical, or electro- pneumatic servo-mechanisms used in testing products.
-In addition, he/she must have a proven record of successful development programs working as a part of a project team in this field.

Education: Bachelor- degree in Mechanical Engineering or related field

Compensation: Highly competitive with benefits

Employment Criteria: This position includes access or potential access to ITAR technical data. Therefore, candidates will need to verify US Citizenship. No visa or student visa candidates considered.

Ingenium Technologies Corporation is a leading engineering services organization, providing outsourcing, consulting, and talent solutions.

Employment Statement: Ingenium Technologies is an equal opportunity employer and does not discriminate on the basis of race, color, religion, gender, age, national origin, disability, veteran status, sexual orientation, or any other classification protected by federal, state or local law. Proof of eligibility for employment will be required upon employment.

Additional Job Postings: http://www.ingeniumtech.com/jobs/
 
Job Number: 61747
Job Location: Rockford, IL Illinois
Rate: Market
Per Diem: no
Overtime: possible
Duration: 6-12 months
Start Date: 3 weeks
Input Date: 11/14/2020
Firm Name: INGENIUM TECHNOLOGY
Attention: David Johnson
Address: 4216 MARAY DR UNIT A1
City, State: ROCKFORD, IL 61107
Phone: 815/315-9273
Fax Phone: 815/399-8804
Website: www.ingeniumtech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Air Systems Engineer (ECS)

Description:
Our client is seeking an Aerospace engineer with Air Systems/ECS experience to join the team in Seattle, WA. The ideal candidate will possess aircraft certification experience with a specialty in environmental control systems.

Essential Functions:
� Coordinate system test and certification requirements.
� Author flight test and ground test specifications.
� Support flight test and ground test activities.
� Analyze test data and evaluate system operation.
� Prepare test reports.
� Domestic and occasional international travel is required.
Desired Qualifications:
� 5+ years� experience with CPCS (Cabin pressurization control system), flow balancing, smoke penetration and detection, valve and control logic, failure cases, OHD (overheat detection), cabin pull-up/pull-down, hot and cold weather deployments
� Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
� Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
� Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
� A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
� Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
� Ability to represent the client professionally and positively during client interactions and meetings.
� Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
� Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

Candidates must have legal authorization to work in the United States, Canada or Mexico
 
Job Number: ECS/SEA
Job Location: seattle, wa
Per Diem: possible
Overtime: Yes
Duration: LT
Start Date: asap
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Maintenance Program Engineers II / III / IV (CA)

Description:
Applicant will perform Maintenance Steering Group-3 (MSG-3) analysis on Lightning/High Intensity Radiated Fields (LHIRF) Significant Items (LHSIs) to identify scheduled maintenance required to maintain LHIRF protection features for continued airworthiness. Applicant will compile analysis results and present to the customer working group (Airlines and Regulatory) for approval. Applicant should have good working knowledge and experience with electrical component design/installations, engineering drawings/schematics and component specifications. Applicant needs to be detail oriented with excellent research skills. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
 
Job Number: MaintEngCA
Job Location: Seal Beach, CA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 12+ months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Structures Engineers - Purchase, NY

Description:
STS AeroStaff Services is currently hiring Aircraft Structures Engineers for open positions in Purchase, New York.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Purpose:

The Aircraft Structures Engineer reports to the Structures Engineer Manager, and is responsible for the technical accuracy and reliability of aircraft. Additional responsibilities include the Boeing 747 aircraft systems technical accuracy and reliability.

Job Duties:

• Provide budgetary data on projects and issues as directed.
• Report on the status of projects and issues as directed.
• Issue instructions and documents to economically support operations and return aircraft to service in a safe, airworthy, and timely manner.
• Develop and/or obtain approved data, acceptable data, and Alternate Methods of Compliance (AMOCs) for repairs, alterations, and modifications.
• Update technical source documents as applicable to insure accuracy.
• Support integration of new and previously operated aircraft.
• Liaise with manufacturers; maintenance representatives, repair & overhaul (MRO) facilities; outside engineering departments; regulatory personnel; and other outside agencies.
• Evaluate Federal Aviation Regulations (FARs), Notices of Proposed Rulemaking (NPRMs), Airworthiness Directives (ADs), Service Bulletins (SBs), Service Letters (SLs), and other notifications of in-service issues.
• Develop product improvement modifications as directed by Reliability Indicators.
• Work with original equipment manufacturers on emerging issues to help ensure safety and airworthiness, but also minimize the economic impact.
• Organize, develop and provide all necessary Structures Engineering documentation required to complete aircraft Systems modifications and repairs within the allocated time schedule and budget allowance.
• Establish component repair and build specifications to enhance dispatch reliability in accordance with budgetary and regulatory requirements.
• Provide technical support to Technical Operations, Ground Operations, Flight Operations, and other Worldwide Holdings personnel.
• Coordinate with other Engineering staff to provide 24/7 technical support.
• Review systems portion of the Aircraft Maintenance and Inspection Program, and initiate maintenance program changes and changes to maintenance documents.

Qualifications:

• 10 years Aircraft Structures Engineering.
• 5-7 years in applied engineering setting.
• B.S. Engineering/Technical Engineering Degree (ME or AE) or equivalent experience.
• Meets deadlines, daily attendance & punctuality standard.
• Remembers & follows instructions, Work is thorough, Alertness, Commitment to task, Perceptivity, Produces accurate, dependable work, Output is consistent, Complete attention to detail.
• Volume of work produced meets expectations.
• Experience with Microsoft Word, Excel.
• Familiarity with aircraft and engine system components.
• Strong technical skills and knowledge of large aircraft system design.
• Ability to identify cost effective engineering solutions.
• Excellent communication skills.
• Ability to interface with manufacturers and regulatory agencies.
• Some financial analysis skills required.

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 37297
Job Location: Purchase, NY
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Systems Engineers

Description:
Aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s is seeking multiple Aircraft Systems Engineers. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

Seeking a contract or fulltime engineers to join the team. At least five years� experience with one or more of the following: Electrical, Avionics, Flight Controls, ECS, Protective Systems (Anti Ice, Fire Protection), and Hydro Mechanical Systems (Landing Gear, Hydraulics). The ideal candidate will possess relevant aircraft systems integration and certification experience.
� Electrical
� Avionics
� Flight Controls
� Air Systems (ECS)
� Protective Systems (Anti Ice, Firex)
� Landing Gear
� Hydraulics

Essential functions:
� System requirements verification and validation.
� Flight test and ground test specifications.
� Support flight test and ground test activities.
� Analyze test data and evaluate system operation.
� Prepare test reports.

Desired Qualifications:
� Experience with FAA Part 25 or Part 23 certification, flight and ground test activities.
� Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
� A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
� Ability to represent the client professionally and positively during client interactions and meetings.
� Bachelor degree in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.

Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They have a growing team of aerospace engineers, technicians, mechanics, and specialist consultants that support multiple programs in the aerospace industry.
 
Job Location: Seattle, WA
Per Diem: Possible
Overtime: Yes
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Dawn Bergau
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airframe Structural Analysis

Description:
REQUIRED SKILLS
Education: BSME/Aerospace Eng. required, MS preferred

WORK EXPERIENCE
10+ years experience in airframe structural analysis of metallic primary structures. Additional airframe advanced composite primary structure experience preferred. Experience with finite element modeling and analysis and familiarity with airframe structural testing and instrumentation practices. In-depth application of fatigue concepts and methodology. Familiarity with fracture mechanics principles/ methodology.

SOFTWARE EXPERIENCE
NASTRAN/PATRAN or equivalent FEM, Mathcad or equivalent math tools, Stress and strain based fatigue methods, MS Office applications and familiarity with Catia.

DUTIES AND ESSENTIAL FUNCTIONS
The Airframe Structural Analysis Core Competency Unit is responsible for insuring the structural integrity of the airframe fuselage, landing gear and propulsion installations and all other attachments to airframe fuselage, including electrical, controls and dynamic systems attachments. Structural integrity responsibilities cover composite and conventional structures and extend from conceptualization on through development, manufacturing and field service support. In fulfilling its function, adherence to the appropriate design criteria and other directives mandated by the customer and or regulatory agencies is strictly maintained. Specific functions include: Static structural analysis and Margin of Safety determination, finite element modeling of airframe structures using PATRAN/NASTRAN and stress-life fatigue analysis using Sikorsky standard work procedures.

US Citizenship (No dual citizenships.) required.
Over Time not guaranteed.
 
Job Number: 16-637-1394
Job Location: Southeast
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airworthiness Inspector Sr

Description:
Airworthiness Inspector Sr
Long Beach, CA
Long Term Contract
$30.00-39.10/Hr

Unique Skills:
Proven ability to work as part of a team

Education and Experience Requirements:
High School graduate/GED. Airframe and Powerplant License required. Six (6) years aircraft/component inspection experience to include (3) years experience on large or mid-size aircraft.

Position Purpose:
The Senior Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews related paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed.

Principal Duties and Responsibilities:

Essential Functions: 1. Responsible for all quality control inspections on aircraft/components in the Repair Station. 2. Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data. 3. Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting. 4. Keeps accurate, neat and legible records of the work performed on aircraft/components. 5. Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner. 6. Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service. 7. Ensures aircraft/components are airworthy prior to any flight activities. 8. Mentors technicians on effective documentation.

Additional Functions: 1. Accomplishes research of Aircraft Log Books and or computer maintenance programs to identify ongoing inspection programs, status of aircraft within those programs, Airworthiness Directive status, and Service Bulletin status. 2. Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual. 3. Assists leads and supervisors in training of Airworthiness Inspectors. Promote high standards of quality through instruction and by setting the example. 4. Works with and instructs subordinate mechanics/technicians in troubleshooting and operational/functional procedures. 5. Signs FAA 8130-9 Statement of conformity on projects completed on his/her aircraft. 6. May perform ODA functions as assigned. 7. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. 8. Performs other duties as assigned.

Other Requirements: 1. Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents. 2. Proficient in blueprint reading, use/interpretation of Maintenance Manuals, test specifications and other inspection related documentation as required. 3. Familiar with FAA certification approval processes. 4. Strong written and verbal communication skills. Must be able to effectively prioritize tasks. 5. Strong computer skills. Proficient with Microsoft Word. Minimum 20 WPM typing speed.
 
Job Number: 6875
Job Location: Long Beach, CA
Rate: 30.00-39.10
Per Diem: Possible Split
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airworthiness Inspector Sr.

Description:
Airworthiness Inspector Sr.


Location: Savannah, GA
Rate: $35.75/HR
Long Term contract


Unique Skills:
Must be able to support AAP on all shifts 24 /7


Education and Experience Requirements:
High School graduate/GED. Airframe and Powerplant License required. Six (6) years aircraft/component inspection experience to include (3) years experience on large or mid-size aircraft.


Position Purpose:
The Senior Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews related paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed.

Principal Duties and Responsibilities:
Essential Functions: 1. Responsible for all quality control inspections on aircraft/components in the Repair Station. 2. Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data. 3. Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting. 4. Keeps accurate, neat and legible records of the work performed on aircraft/components. 5. Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner. 6. Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service. 7. Ensures aircraft/components are airworthy prior to any flight activities. 8. Mentors technicians on effective documentation.

Additional Functions: 1. Accomplishes research of Aircraft Log Books and or computer maintenance programs to identify ongoing inspection programs, status of aircraft within those programs, Airworthiness Directive status, and Service Bulletin status. 2. Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual. 3. Assists leads and supervisors in training of Airworthiness Inspectors. Promote high standards of quality through instruction and by setting the example. 4. Works with and instructs subordinate mechanics/technicians in troubleshooting and operational/functional procedures. 5. Signs FAA 8130-9 Statement of conformity on projects completed on his/her aircraft. 6. May perform ODA functions as assigned. 7. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. 8. Performs other duties as assigned.

Other Requirements: 1. Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents. 2. Proficient in blueprint reading, use/interpretation of Maintenance Manuals, test specifications and other inspection related documentation as required. 3. Familiar with FAA certification approval processes. 4. Strong written and verbal communication skills. Must be able to effectively prioritize tasks. 5. Strong computer skills. Proficient with Microsoft Word. Minimum 20 WPM typing speed.
 
Job Number: 6894
Job Location: Savannah, GA
Rate: $35.75/HR
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Cherise Harris
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Design Engineer

Description:
  • Avionics and Electrical Systems design engineering background, with experience in cross-systems integration.

    Education:
    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.
     
  • Job Number: 24-140
    Job Location: Savannah, GA
    Rate: $58 to $63 per hour
    Per Diem: Yes
    Overtime: YES
    Duration: 1 year+
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Avionics-Electrical Systems Flight Test Engineer

    Description:
    UNIQUE SKILLS
    Experience either conducting or functioning as an on board flight analyst during experimental fixed wing aircraft flight testing in the field of avionics and electrical systems. Experience documenting test procedures consisting of step by step instructions which includes success criteria for determining pass or fail of test points in a released test plan. Experience reviewing results of flight test data to understand results and make decisions on whether test points pass or fail.

    ESSENTIAL FUNCTIONS
    1. Contributes to planning, developing and coordinating of important engineering projects
    2. Provides specialized technical assistance to team members
    3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    4. Determines and develops own approach to solutions within schedule and cost objectives
    5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
    6. Acts as liaison with representatives outside of the assigned group/area

    ADDITIONAL FUNCTIONS
    1. Actively works to improve daily processes and ensures all work meets customer requirements
    2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
    3. Performs other duties as assigned

    OTHER REQUIREMENTS
    1. Advanced degree in engineering related field preferred
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 16-528-64401
    Job Location: Southeast
    Rate: $60.00 to $80.00/per hr.
    Per Diem: Split
    Overtime: Possible
    Duration: 6 mths +
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Avionics/Electrical Systems Flight Test Engineer

    Description:
    Avionics/Electrical Systems Flight Test Engineer

    Location: Savannah, GA
    Rate: $60.00 - $80.00/HR
    Long Term contract


    Unique Skills:
    - Experience either conducting or functioning as an on board flight analyst during experimental fixed wing aircraft flight testing in the field of avionics and electrical systems.
    - Experience documenting test procedures consisting of step by step instructions which includes success criteria for determining pass or fail of test points in a released test plan.
    - Experience reviewing results of flight test data to understand results and make decisions on whether test points pass or fail.

    Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

    Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 5792
    Job Location: Savannah, GA
    Rate: $60-$80
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Business Process Analysts - Greensboro, NC

    Description:
    STS AeroStaff Services is currently hiring Business Process Analysts for open positions in Greensboro, North Carolina.

    Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

    Job Summary:

    The Business Process Analyst enables problem solving and data driven decisions for the program office and program management team by developing and maintaining metrics, reporting tools, and integrating data across a variety of business systems. These business systems include but are not limited to SAP, Team Center, SharePoint, and individual files in MS Office formats.

    Job Duties:

    • Collects and interrogates aircraft, project, and part status data from a variety of sources
    • Provides metrics and reports in support of the program management team on one-time and recurring needs.
    • Develops ad-hoc reporting solutions in MS Excel, MS Access, Business Intelligence (SAP), and MS SharePoint.
    • Develops methods to automate and integrate reporting templates to improve consistency while reducing the time to execute on a daily, weekly, or monthly basis.
    • Defines requirements, validate, and support implementation of related IT projects for the project office.
    • Interacts with several organizations such as Supply Chain, IT, Operations, and Engineering to fully understand and access data.

    Qualifications:

    • Bachelor’s Degree (BA/BS) from four-year college or university required.
    • 2+ years’ experience in developing and maintaining business systems data in a manufacturing environment.

    Requirements:

    • Strong oral and written communication skills.
    • Excellent collaboration and interpersonal skills, with a demonstrated ability to successfully work cross-functionally and with all levels within the business.
    • Competent SAP user familiar with common MRP and supply chain functions.
    • Proficient in MS Office Suite (Excel, Word, PowerPoint, Project, Access).
    • Experience in developing macros in MS Excel using MS Visual Basic.
    • Experience building SQL queries to parse and reformat large data sets.
    • Able to create and edit Business Intelligence Reports.
    • Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
    • Incumbents may be required to stand, sit, squat, walk, bend, climb ladders, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
    • Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
    • Read, hear, speak, and see with no restrictions, as required by job duties.
    • Comprehend and adhere to management directions and/or safety instructions with no restrictions.
    • Effectively communicate in Business English language.
    • Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.
    • Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties.

    Benefits:

    STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

    We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

    Thanks for taking the time, and we look forward to hearing from you soon.
     
    Job Number: 37323
    Job Location: Greensboro, NC
    Rate: DOE
    Per Diem: No
    Overtime: Possible
    Duration: Temp
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STS AEROSTAFF SERVICES
    Attention: STS AeroStaff Services
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 800/800-2400
    Website: www.stsaviationgroup.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Cabin Interiors Design Engineer

    Description:
    Unique Skills:
    Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions. Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations. -Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis. -Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements. -Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam. -Design Engineer will be required to liaison with the shop on engineering issues. Design assignments include but are not limited to: -Item Installation Analysis -Similarity Analysis -Mount Configuration Design engineer will employ design standards consistent with company standards and accepted design methods are executed under the direction of the Mechanical Engineering Group Head to meet the manufacturing schedule. -Other preferred skills: Microsoft Project, Excel and Power Point.
     
    Job Number: 24-134
    Job Location: Savannah, GA
    Rate: $55-$63/hr.
    Per Diem: YES
    Overtime: YES
    Duration: 1 YR+
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Joe
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Cabin Safety Engineer

    Description:
    Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

    The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations

    Seeking direct and contract Cabin Safety engineers to join the team in Seattle with at least five years� experience with cabin safety engineering, to include:

    � Flammability
    � Emergency lighting
    � Escape slides
    � Seats crash testing
    � Exit row indications and placards
    � Emergency exit doors

    Essential functions:
    � System requirements verification and validation.
    � Flight test and ground test specifications.
    � Support flight test and ground test activities.
    � Analyze test data and evaluate system operation.
    � Prepare test reports.

    Desired Qualifications:
    � Cabin Safety Engineer shall have experience with flammability, emergency lighting, slides, crash testing, etc.
    � Experience with FAA Part 25 or Part 23 certification, flight and ground test activities.
    � Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
    � A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
    � Ability to represent the client professionally and positively during client interactions and meetings.
    � Bachelor degree in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.

    If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.
    Candidates must have legal authorization to work in the United States, Canada or Mexico
     
    Job Number: CS/Sea
    Job Location: seattle, wa
    Per Diem: possible
    Overtime: possible
    Duration: LT
    Start Date: asap
    Input Date: 11/14/2020
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Dawn Bergau
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Cabin Systems, Electrical Engineer

    Description:
    Unique Skills:
  • Experience in Engineering design of Electrical Systems that are part of and support aircraft interiors. This includes entertainment, power, lighting, and communication systems.
  • Experience in creating wiring diagrams, schematics, wire harness drawings, electrical installation drawings, test plans, and reports
  • AutoCAD, CATIA V5 and SmarTeam experience preferred

    Education and Experience Requirements:
  • Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
  • 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
  • Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
     
  • Job Number: 24-153
    Job Location: Savannah, GA
    Rate: $58-$63
    Per Diem: YES
    Overtime: YES
    Duration: 1 YR+
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Joe
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Completions Electrical Checker

    Description:
  • Electrical Engineering checking and/or design experience for wiring diagrams, schematics, wire harness drawings, and electrical installation drawings using AutoCAD and SmarTeam.
  • Experience in engineering of aircraft interior components and installations is preferred
     
  • Job Number: 24-151
    Job Location: Savannah, GA
    Rate: $50 to $55/hr
    Per Diem: YES
    Overtime: YES
    Duration: 1 year plus
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Completions Electrical Engineer

    Description:
    Completions Electrical Engineer

    Location: Savannah, GA
    Rate: $58.00 - $63.00/HR
    Long Term contract


    Unique Skills:
    Seeking candidate with:

    -Experience in Engineering design of Electrical Systems that are part of and support aircraft interiors. This includes entertainment, power, lighting, and communication systems.

    -Experience in creating wiring diagrams, schematics, wire harness drawings, electrical installation drawings, test plans, reports, and completing supporting analysis/calculations (e.g. voltage drop)

    -AutoCAD, CATIA V5 and SmarTeam experience preferred
     
    Job Number: 6902
    Job Location: Savannah, GA
    Rate: $58.00 - $63.00/HR
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Completions Electrical Engineering

    Description:
    Electrical Engineering checking and/or design experience for wiring diagrams, schematics, wire harness drawings, and electrical installation drawings using AutoCAD and SmarTeam. Experience in engineering of aircraft interior components and installations is preferred
     
    Job Number: Completions Electrical Engineering
    Job Location: Savannah, GA
    Rate: 50-55
    Per Diem: Yes
    Overtime: yes
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: SOURCE GROUP PROFESSIONALS INC
    Attention: Recruiter
    Address: 4729 E SUNRISE DR STE 244
    City, State: TUCSON, AZ 85718
    800 Phone: 888/352-8797
    Fax Phone: 866/835-2145
    Website: www.sourcegrouppros.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Completions Electrical Engineering Checker

    Description:
    Completions Electrical Engineering Checker

    Location: Savannah, GA
    Rate: $50.00 - $55.00/HR
    Long Term contract


    Unique Skills:
    - Electrical Engineering checking and/or design experience for wiring diagrams, schematics, wire harness drawings, and electrical installation drawings using AutoCAD and SmarTeam.
    - Experience in engineering of aircraft interior components and installations is preferred
     
    Job Number: 6897
    Job Location: Savannah, GA
    Rate: $50.00 - $55.00/HR
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Completions Electrical Liaison

    Description:
    Unique Skills:

    Experience with shop floor support/liaison of aircraft outfitting in an Electrical Engineering capacity working with wiring diagrams, schematics, wire harness assembly drawings and electrical installation drawings. Position requires interfacing with electrical installers, inspectors, design engineers and AR's to resolve build and systems functional issues for cabin related systems. (Examples: power, lighting, communications)
     
    Job Number: Completions Electrical Liaison
    Job Location: Savannah, GA
    Rate: 58-63
    Per Diem: Yes
    Overtime: yes
    Duration: LT
    Start Date: asap
    Input Date: 11/14/2020
    Firm Name: SOURCE GROUP PROFESSIONALS INC
    Attention: Recruiter
    Address: 4729 E SUNRISE DR STE 244
    City, State: TUCSON, AZ 85718
    800 Phone: 888/352-8797
    Fax Phone: 866/835-2145
    Website: www.sourcegrouppros.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Completions Electrical Liaison Engineer

    Description:
  • Experience with shop floor support/liaison of aircraft outfitting in an Electrical Engineering capacity working with wiring diagrams, schematics, wire harness assembly drawings and electrical installation drawings.
  • Position requires interfacing with electrical installers, inspectors, design engineers and AR's to resolve build and systems functional issues for cabin related systems. (Examples: power, lighting, communications)
     
  • Job Number: 24-152
    Job Location: Savannah, GA
    Rate: $58 to $63
    Per Diem: YES
    Overtime: YES
    Duration: 1 plus years
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Completions Electrical Liaison Engineering Consultant

    Description:
    Completions Electrical Liaison Engineering Consultant

    Location: Savannah, GA
    Rate: $58.00 - $63.00/HR
    Long Term contract


    Unique Skills:
    - Experience with shop floor support/liaison of aircraft outfitting in an Electrical Engineering capacity working with wiring diagrams, schematics, wire harness assembly drawings and electrical installation drawings.
    - Position requires interfacing with electrical installers, inspectors, design engineers and AR's to resolve build and systems functional issues for cabin related systems. (Examples: power, lighting, communications)
     
    Job Number: 6901
    Job Location: Savannah, GA
    Rate: $58.00 - $63.00/HR
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Contract - Manufacturing Engineer II

    Description:
    Unique Skills:

    SAP, Solumina, Electrical systems knowledge


    Education and Experience Requirements:
    Bachelors degree in Mechanical, Manufacturing Engineering or related curriculum, or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Three (3) years Manufacturing Engineering, planning, or related technical experience.


    Position Purpose:

    Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning).

    Principal Duties and Responsibilities:

    Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 9. Utilize CADAM/CATIA data and nesting software to generate flat patterns, Master Models, NC data, and ply nests to meet Engineering and Manufacturing requirements. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

    Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. 3. Perform other duties as assigned.

    Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
     
    Job Number: 88302
    Job Location: Pooler, GA
    Overtime: Possible
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INTERGEN GROUP
    Attention: Cort Hayes
    Address: 5051 PEACHTREE PKWY STE 200
    City, State: PEACHTREE CORNERS, GA 30092
    Phone: 678/318-1816
    Fax Phone: 678/493-1467
    Website: www.intergengroup.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Control Systems Engineer Programmer

    Description:
    Position Description:

    Reviews, analyzes, and modifies programming systems including encoding, testing, debugging and installing to support an organization's client/server software applications.
    Accountable for field engineering support to the Resort and supporting departments, including control systems engineering services for ride, show, and other ride related control systems. These services include: planning, organizing, and leading teams in troubleshooting; problem resolution; system operational enhancement; system reliability improvement; and documentation.
    Must have sufficient technical knowledge and awareness of details to be able to recognize when technical problems are developing in various disciplines, and to initiate appropriate corrective actions. Respond to mechanical and control emergencies resulting from Attraction downtimes at the Resort.

    Requirements:
    • Controls Systems experience with 1-5+ years in the amusement park industry or industrial/manufacturing environment
    • Ride element performance analysis: dynamic, kinematic, hydraulic and pneumatic analysis and calculations
    • Knowledge gained by experience in the following:
    Electronic control systems and signal processing, including familiarity with relays and programmable logic controllers
    Electrical motor controls including variable frequency drives and soft starts
    Variety of industrial automation PLC manufacturers
    National and California Electrical Code
    Nationally recognized Testing Laboratory certifications such as TUV, UL, etc.
    AutoCAD o Object oriented programming
    C and C++ programming
    Ladder logic
    Wiring and interconnect diagrams
    ANSI, ASTM, and IEEE standards
    • Excellent oral and written communication

    Bachelor of Science in Electrical Engineering, Mechatronics, Electronics Engineering, or equivalent from an ABET accredited University.
     
    Job Number: JO358752
    Job Location: Anaheim, CA
    Duration: 12 months+
    Start Date: asap
    Input Date: 11/14/2020
    Firm Name: CDI CORPORATION
    Attention: Jonathan Oleson
    Address: 17177 PRESTON RD STE 300
    City, State: DALLAS, TX 75248
    Website: www.cdicorp.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Design Engineer / NX 10 CA

    Description:
    Job Title: Design Engineer
    Job Number: 157682/4391
    Location: Torrance, CA
    Compensation: 50/hr
    Assignment Length: 6 month contract

    Description:

    • Contribute to the development of new product requirements through consulting with customers and sales personnel.
    • Validate conceptual problem solutions by performing trade studies and analyses.
    • Be a key contributor to the preparation of successful proposal designs, cost estimates, and technical volume write ups.
    • Operate as a key element in a team of creative, independent individuals.
    • Represent Moog in a manner consistent with its technical reputation.
    • Create reliable designs through a comprehensive experimental development test program.
    • Document designs, analyses, and test results with accurate and concise reports
    Required skills: • 5-8 years of design and development engineering experience
    • Self-starter with strong analytical skills and a desire for constant improvement
    • Excellent customer relations skills
    • Good sense of three-dimensional spatial orientation and knowledge of mechanical hardware design
    • Team orientation and desire to participate in and contribute to a high functioning team
    Scope: Moog Aircraft Group in Torrance is looking for a Design Engineer to be an integral part of our engineering team delivering highly complex electromechanical, mechanical, and hydro mechanical components and systems to our Commercial sector customers. Typically, the design engineer devises new approaches for the engineering problems encountered.
    Education: • Bachelor’s degree in Mechanical or Aerospace Engineering, advanced degree preferred.
     
    Job Number: MB-4391
    Job Location: Torrance, CA
    Rate: 50/hr max
    Duration: 6 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Design Engineer 3

    Description:
    This position requires a strong background in Aerospace Engineering/Design with an emphasis on pneumatic, mechanical and electro-mechanical components/assemblies. The ideal candidate will have experience in the design, analysis and prototyping of pneumatic fluid control devices such as solenoid and motor operated pneumatic valves. The candidate should have a broad background including work with mechanical devices and subsystems, preferably for use in military or commercial aviation. Knowledge of airborne weapon systems and /or weapon carriage equipment is strongly desirable.

    Specialist knowledge regarding the sizing of flow elements, design and operation of high pressure pneumatics, hydraulics, motor actuators and solenoids will be a strong differentiator for candidate selection. Must be flexible and able to work effectively in a fast paced environment as a member of a cross functional team and as an individual contributor.


    SKILLS / REQUIREMENTS
    Minimum BSME, BSAE and 7 to 10 years experience in relevant design/development environment, preferably for military or commercial aviation.

    Knowledge of manufacture of mechanical components and assemblies with emphasis in complex electromechanical systems, or large structures

    Knowledge of manufacturing techniques, their capabilities, strengths and weaknesses. Prior assembly or shop experience is a plus

    Must have knowledge of aerospace materials properties and selection as well as processing including Heat Treat and Coatings for aerospace requirements

    Must be able to perform basic measurements and simple inspection processes

    Must be able to demonstrate knowledge and experience in creation of design concepts using hand sketches, and CAD tools.

    CAD experience in CATIA or Pro-E a plus

    Must be able to perform preliminary flow passage sizing, pressure vessel and structure stress checks and rough sizing calculations by hand. Use of FEA tools is a plus.

    Must have experience with MIL-STD documents, reading and interpretation of ASME Y14.5

    Must be able to write engineering reports that include analysis and results

    Must have excellent verbal and written communication skills

    Must be fluent in written and spoken English

    Evidence of accomplishment in self-documentation of work product through technical reports, test reports etc. will be considered as a plus

    Knowledge of Microsoft Office products is essential

    Proof of Education is required
    US Citizenship Required
     
    Job Location: Inglewood, CA
    Rate: Open
    Per Diem: No
    Overtime: No
    Duration: Permanent
    Start Date: Now
    Input Date: 11/14/2020
    Firm Name: JOHNSON SERVICE GROUP
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Design Engineer, Electrical Brackets &Installation

    Description:
  • Develop and Maintain Electrical Brackets and Installation designs.
  • Catia V5 experience is mandatory.
  • 2 to 10 years of experience.
  • Previous part 23/25 employment is a major plus.
  • Will train candidate to do installs as long as they have a strong background in Design.
     
  • Job Number: 28-009
    Job Location: Greensboro, NC
    Rate: $30 to $40
    Per Diem: YES
    Overtime: YES
    Duration: 1 plus years
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Airframe Systems Integration Zone

    Description:
    Airframe Systems Integration Zone

    Location: Savannah, GA
    Duration: Long Term Contract
    Pay Rate: $60/hr - $65/hr
    Shift: First

    Position Purpose:
    The primary objective for the Airframe Systems Integration group is to ensure designs are fully integrated between the multiple design disciplines as well as manufacturing and maintainability. Other important objectives included supporting Design for Manufacturing goals of part standardization and part count reduction and providing requirements and processes for each phase of the design process.

    Essential Functions:
    1. Manages Installation Design of primary aircraft barrel assemblies.
    2. Coordinates integration of airframe and system installations. Holds planning and review meetings as needed. Manages and reviews schedules.
    3. Manages the coordination and development of parts, planning, tooling & purchase orders.
    4. Has oversight over the release of engineering documentation.
    5. Responsible for interface definition & configuration control of a specific aircraft barrel section.
    6. Reviews engineering and manufacturing release criteria.
    7. Defines when sufficient review cycle criteria have been met. Conducts risk analysis for remaining tasks.

    Additional Functions:
    1. Actively works to improve daily processes and ensures all work meets customer requirements.
    2. Experience in communicating with employees/teams in productive and efficient manner.
    3. Ability to work independently and cross-functionally.
    4. Current and up-to-date knowledge of developments in the structures/systems design disciplines 3D / MBD data requirements, as well as all interrelated disciplines of design build teams.
    5. Ensures designs meet customer criteria, quality standards and FAA requirements
    6. Knowledge of industry design and documentation standards.
    7. Use and understanding of Dimensioning and tolerancing including familiarity with ASME Y14.5 a must.
    8. Experience with mechanical assemblies and manufacturing technique design.
    9. Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
    10. Performs other duties as assigned
    11. CATIA Knowledgeware and SmarTeam experience desirable.

    Education and Experience Requirements:
    Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
     
    Job Number: 6814
    Job Location: Savannah, GA
    Rate: 60-65
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Design Support and Training Instructor

    Description:
    Design Support and Training - Instructor - Tech Spec II
    Savannah, GA
    Rate:$60-$62

    Unique Skills:

    CATIA v5 experienced with 5000+ hours. All Level 1 tools CATIA v5 (Part Design, Assembly, Drafting). Level 2 tools CATIA v5 Generative Surfacing, Free Style Shaping, Generative Sheetmetal, Generative Stress Analysis. Other tools: CATIA v5 Composites, Electrical EHI, Capitol Harness, Tubing experience a plus. Quantitative experience with Geometric Dimensioning and Tolerances a plus. Experience working within PDM systems such as Enovia, SmarTeam or NX/Teamcenter. Formal Classroom instruction experience required for CATIA and PDM.


    Education and Experience Requirements:

    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

    Position Purpose:

    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

    Principal Duties and Responsibilities:

    Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 2. Performs other duties as assigned

    Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 6620
    Job Location: Savannah, GA
    Rate: $60-$62
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Brad
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    EMI Test Engineer

    Description:
    EMI Test Engineer
    6+ month contract
    Salt Lake City, UT


    This individual will be responsible for formulating the proper combination of testing and analyses to show compliance with customer requirements in these areas, including the preparation of supporting analyses and simulation, formulation of test plans, planning of the proper resources and facilities, execution of compliance tests, and preparation of the technical material for the final report. The candidate should be experienced with the design of EMI filters and compliance testing to Mil-std-461 and DO-160. Bachelor of Science in Electrical Engineering preferred, minimum seven years experience.

    Previous Aerospace Industry experience preferred.
     
    Job Number: 51025
    Job Location: Salt Lake City, UT
    Rate: DOE
    Per Diem: Possible
    Overtime: Possible
    Duration: 6+ months
    Start Date: 1/16/17
    Input Date: 11/14/2020
    Firm Name: BUTLER AEROSPACE & DEFENSE
    Attention: Laura Leszek
    Address: SHELTON POINTE STE 204
    2 TRAP FALLS ROAD

    City, State: SHELTON, CT 06484
    Phone: 203/926-2705
    Website: www.butler.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    EMI Test Engineer UT

    Description:
    Job title: EMI Test Engineer
    Job code: Number of openings: 2
    Job type: Engineering/IT/Professional Position location: Salt Lake - UT
    Employment type: Contract OT exempt: Yes




    Work Information


    Shift: Other Education Requirement: BS/BA
    Additional Shift Details: M-F 8am-5pm, possible OT and shift changes Driving on company time?: No
    Minimum Years of Experience: 7 Maximum Hourly Pay Rate: 69
    Start Date: 01/16/2017 Tentative End Date: 07/16/2017

    Job Description
    Function: EMI Test Engineer
    Essential job functions: This individual will be responsible for formulating the proper combination of testing and analyses to show compliance with customer requirements in these areas, including the preparation of supporting analyses and simulation, formulation of test plans, planning of the proper resources and facilities, execution of compliance tests, and preparation of the technical material for the final report.
    Required skills: The candidate should be experienced with the design of EMI filters and compliance testing to Mil-std-461 and DO-160.

    Bachelor of Science in Electrical Engineering preferred, minimum seven years’ experience.
     
    Job Number: MB-4442
    Job Location: Salt Lake City, UT
    Rate: 69/hr max
    Duration: 6 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    EMI Test Engineer in Salt Lake City, UT #4442AS

    Description:
    Recruiter to Contact: Adam Salazar
    Job Title: EMI Test Engineer
    Job Number: 4442
    Location: Salt Lake City, UT
    Compensation: DOE
    Assignment Length: 6 month contract w/ possible extension.

    **Previous Aerospace Industry experience preferred**]
    This individual will be responsible for formulating the proper combination of testing and analyses to show compliance with customer requirements in these areas, including the preparation of supporting analyses and simulation, formulation of test plans, planning of the proper resources and facilities, execution of compliance tests, and preparation of the technical material for the final report.
    The candidate should be experienced with the design of EMI filters and compliance testing to Mil-std-461 and DO-160. Bachelor of Science in Electrical Engineering preferred, minimum seven years’ experience.

    HM manager notes!
    o BS Electrical Engineer preferred.
    o Currently have 3 engineers working in the EMI testing division that support 4-5 testing chambers
    o There are peak times in which they need to run all 5 chambers.
    o Looking for 2 people to join the team
    o Currently working with custom automated test equipment (They will train on equipment)
    o How to set up the test data and parameters and need someone who will know how to collect the test results.
    o DO160 and Mil-STD 461 specifications are being used for compliant testing measures –Mainly working with military & defense products
    o Looking for candidates that can do the job with minimal supervision
    o Hours: M-F 8am-5pm, possible OT and shift changes
     
    Job Number: #4442AS
    Job Location: Salt Lake City, UT
    Rate: Negotiable, DOE
    Duration: 6 months+possible extension
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Adam Salazar
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    EMI/EMC Test Engineer

    Description:
    EMI Test Engineer
    This individual will be responsible for formulating the proper combination of testing and analyses to show compliance with customer requirements in these areas, including the preparation of supporting analyses and simulation, formulation of test plans, planning of the proper resources and facilities, execution of compliance tests, and preparation of the technical material for the final report. The candidate should be experienced with the design of EMI filters and compliance testing to Mil-std-461 and DO-160. Bachelor of Science in Electrical Engineering preferred, minimum seven years' experience.

    Length of Assignment: 6 months with possible extension.

    Previous Aerospace Industry experience preferred.
     
    Job Number: 17-00251
    Job Location: Salt Lake City, UT
    Rate: 68.00
    Per Diem: Yes
    Overtime: Yes
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: NESCO RESOURCE
    Attention: Dave Mahabir
    Address: 101 COMMERCE ST STE 3001
    City, State: LAKE MARY, FL 32746
    Phone: 407/710-8000
    Fax Phone: 407/710-8001
    Website: www.nescoresource.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Application Engineer

    Description:
    Electrical Applications Engineer
    Applicant shall: Maintain Electrical Wiring Interconnect System (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wiring diagrams, cable/wire harness assemblies and rack/panel designs from electrical system schematics adhering to EWIS requirements. Select qualified electrical components, such as: connectors, back shells and other parts. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. Education/Experience: Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting products and services. Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area Additional Functions: 1. actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Location: Savannah, GA
    Rate: Open
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INNOVA SOLUTIONS, INC
    Attention: Andrew Walbert
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.innovasolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Applications Engineer

    Description:
    Electrical Applications Engineer
    Savannah, GA
    Rate: $52-$57

    Unique Skills:

    Develop electrical wiring interconnect systems (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wiring diagrams, cable/wire harness assemblies, and rack/panel designs from electrical system schematics adhering to EWIS requirements. Select qualified electrical components such as connectors, backshells, and other parts. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. • Aerospace Experience is required • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required • Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative • Knowledge of Mentor Graphics Capital Harness Systems (CHS) is strongly desired


    Education and Experience Requirements:

    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

    Position Purpose:

    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

    Principal Duties and Responsibilities:

    Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

    Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 6787
    Job Location: Savannah, GA
    Rate: $52-$57
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Cathy O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Applications Engineer

    Description:
    Electrical Application Engineer

    Location: Savannah, GA
    Rate: $58.00 - $63.00/HR
    Long Term contract


    Applicant shall:
    - Develop and maintain Electrical Wiring Interconnect System (EWIS).
    - Specific knowledge of qualified electrical component selection, such as: connectors, backshells and other EWIS components based on system and environmental requirements are required.
    - Must be capable of resolving all technical issues relating to EWIS.
    - Produce and maintain wiring diagrams, cable/wire harness assemblies and rack/panel designs from electrical system schematics adhering to EWIS requirements.
    - Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.

    Education/Experience:
    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

    Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the production of Gulfstream products and services.

    Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

    Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 6803
    Job Location: Savannah, GA
    Rate: $58-$63
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Applications Engineer

    Description:
    Electrical Applications Engineer
    Savannah, GA
    Rate: $58-$63

    Electrical Applications Engineering Consultant

    Location: Savannah, GA
    Rate: $58.00 - $63.00/HR
    Long Term Contract
    1st Shift

    Unique Skills:

    Experience with Autocad required. Aerospace experience required. Experience or knowledge of electrical connectors, backshells, shielding, wiring and electrical connectivity is required. Be Familiar with CFR 14 Part 25 and AS50881. Candidate must be able to create wiring diagrams and schematics to include the selection of qualified electrical components such as connectors, backshells and other electrical parts. Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required.

    Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.

    Job description: Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.

    Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

    Principal Duties and Responsibilities:
    Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

    Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 5885
    Job Location: Savannah, GA
    Rate: $58-$63
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Applications Engineer

    Description:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services.

    Education and Experience Requirements:
    • Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    • Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors.
    • Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

    Unique Skills:
    • Required As a Electrical Applications Engineer (TSII) at Gulfstream you will develop electrical wiring interconnect systems (EWIS), capable of resolving all technical issues relating to EWIS.
    • Produce and maintain wiring diagrams, cable/wire harness assemblies, and rack/panel designs from electrical system schematics adhering to EWIS requirements.
    • Select qualified electrical components such as connectors, backshells, and other parts.
    • Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
    • Aerospace Experience is required
    • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
    • Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
    • Knowledge of Mentor Graphics Capital Harness Systems (CHS) is strongly desired
     
    Job Number: 24-243
    Job Location: Savannah, GA
    Rate: $58-$63
    Per Diem: Yes
    Overtime: Yes
    Duration: 1 Year Plus
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt Gregory
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer

    Description:
    Unique Skills:
    Ideal Candidates will have electrical engineering experience with Cabin Interiors and Systems to include but not limited to: - Cabin Management System - Cabin Entertainment System - Cabin Lighting - Cabin Switch Controls - Satellite Communications - Water System - Waste System - EWIS experience required - 3D Wire Routing - Electrical Checking (Engineering Quality)Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production products and services Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Location: Savannah, GA
    Rate: Open
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INNOVA SOLUTIONS, INC
    Attention: Andrew Walbert
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.innovasolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer - Level 2

    Description:
    Electrical Engineer - Level 2

    Location: Grand Prairie, TX
    Max Pay Rate: $56/hr
    Shift: 9/80
    Duration: 1 Year Contract
    Secret Clearance: (Prime Contract: Can start w/o clearance: Yes; Interim Clearance Sufficient: Yes)

    Description:
    -Develops, designs, verifies, and documents Application-Specific Integrated Circuits (ASIC) and Field Programmable Gate Arrays (FPGA) development.
    -Determines architecture design, logic design, and system simulation.
    -Assignments include the analysis of all aspects from high-level design to synthesis, place and route, and timing and power utilization.
    -Typically uses specialized equipment to establish operation data, conduct experimental tests, and evaluate results.

    Skill/Experience/Education
    Mandatory:
    This company is seeking a Field Programmable Gate Array (FPGA) Design Engineer for a position in Grand Prairie, TX. Digital Design encompasses the full life cycle of electronic subsystems development. As such, the FPGA Design Engineer will be responsible for: Development, integration and test of processor subsystem features and interfaces in FPGA hardware.
    - Synopsis Synplify: 6+ years of experience
    - Synopsis VCS: 6+ years of experience

    Desired:
    Requirements development; FPGA code development; Test bench development; Verification; Synthesis; Timing analysis; Unit test; Support of debug and system integration activities; Task estimation; Design trade studies; Interface definitions; Architecture definition; Schematic entry; Circuit card physical layout; Manufacturing oversight
     
    Job Number: 6790
    Job Location: Grand Prairie, TX
    Rate: 56.00
    Per Diem: Possible
    Overtime: Possible
    Duration: 1 year
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer - TSI

    Description:
    Electrical Engineer - TSI

    Savannah, GA
    Rate: $52-$57
    Long Term contract

    Unique Skills:
    - Candidate shall have experience in one or more of the following: Systems engineering, Analog design, Simulation system hardware design, Data acquisition system design, Instrumentation, Sensor signal I/O card interface, Process measurement and control, Automation Test, Aircraft systems design

    - Candidate must have experience with analog & digital circuit design and analysis - Prefer design experience with a variety of aircraft systems. - Experience with Mentor Graphics CHS / Capital Logic a plus


    Education and Experience Requirements:

    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

    Position Purpose:

    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

    Principal Duties and Responsibilities:

    Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

    Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 5987
    Job Location: Savannah, GA
    Rate: $52-$57/HR
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer II

    Description:
    Electrical Engineer II
    Unique Skills:

    - Required - Candidate must have circuit design and analysis skills. - Design experience with analog and digital I/O interfaces. - Prefer experience with a variety of aircraft systems. - Prefer experience with Mentor Graphics CHS / Capital Logic.


    Education and Experience Requirements:

    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 18 months related engineering experience with Bachelors degree. Experience credit will be considered for related advance degrees limited to 2 years for Masters Degree and 4 years for PhD in fields applicable to this job position.

    Position Purpose:

    Performs engineering work related to the investigation and the solution of technical problems associated with research, design, development, service and manufacture of Gulfstream aircraft.

    Principal Duties and Responsibilities:

    Essential Functions: 1. Solves typical engineering problems within assigned discipline 2. Provides technical assistance to engineering staff and contributes to completion of project milestones 3. Responsible for a complex engineering assignment, or a full project of lesser complexity 4. Follows established schedules while developing plans for engineering assignments 5. Obtains appropriate level of supervisor approvals for work accuracy and adequacy 6. Proficiently applies company/organization policies and procedures

    Additional Functions: 1. Actively works to improve daily processes, and ensures all work meets customer requirements 2. Maintains a current and up-to-date knowledge of developments and application of technical principles, theories, and concepts in assigned field of expertise 3. Performs other duties as assigned

    Other Requirements: 1. The level of technical skills and abilities appropriate for this grade will be established by each discipline 2. Applies knowledge to provide solutions to a variety of technical problems of moderate scope and complexity, using a combination of judgment with defined practices and procedures 3. Failure to achieve results, or erroneous decisions or recommendations, may cause delays in program schedules and/or allocation of additional resources 4. Ability to convey technical concepts in both written and verbal formats 5. Contacts are primarily within the organization, with occasional customer contacts on routine issues 6. Works under general supervision for routine tasks of minor complexity 7. With supervision/mentorship, can coordinate the activities for lower level engineering staff
     
    Job Number: 6477
    Job Location: Savannah, GA
    Rate: $50
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Cathy O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer II with active secret / Mentor DxDesigner and OrCAD Schematic Capture schematic entry design tool / digital electronics and high speed PCB design CA

    Description:
    Job Title: Electrical Engineer II
    Job Number: 157889/6535771
    Location: El Segundo, CA
    Compensation: 50/hr
    Assignment Length: 12 month contract
    Active secret required to start

    Description:


    The Secure Information Systems organization currently has a need for a Sr. Electrical Engineer to design and develop digital hardware for embedded applications. The successful candidate will be responsible for all aspects of the hardware design, including: developing requirements, detailed design, schematic entry, circuit analysis, design documentation, conducting design reviews all the way through hands-on lab testing, debug and integration. Responsibilities will also include preparing and conducting design reviews and being responsible for adhering to allocated budget and project schedule.

    Required Skills:

    6+ years of experience in the field of Electrical Engineering
    Candidate will have a solid background in digital electronics and high speed PCB design
    Must be well versed in both Mentor DxDesigner and OrCAD Schematic Capture schematic entry design tool
    Have hands-on lab debug experience utilizing oscilloscopes, logic analyzers and general lab equipment and able to debug hardware/software embedded applications
    Must be have prior experience developing and integrating embedded hardware platforms utilizing ARM based microprocessors and FPGAs
    Experience in product development and design for manufacturing
    Strong communication skills, both written and oral
    Active DoD Secret Clearance
    U.S. Citizenship is a requirement

    Desired Skills:

    Experience with Mentor DxDesigner schematic entry
    Experience with Hyperlynx Signal Integrity (SI) analysis
    Experience with Xilinx and Altera FPGA embedment, and ability to read and write VHDL programming language
    Familiar with Earned Value Management (EVM), IMS development and proposal development process and be able to assist in the formulation of hardware bids for proposals
    Familiarity with basic knowledge of cryptography and secure hardware design

    Required Education:
    B.S./B.A. Electrical Engineering
     
    Job Number: MB-6535771
    Job Location: El Segundo, CA
    Rate: 50/hr max
    Duration: 12 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer Sr / FPGA Design Engineer TX

    Description:
    Job Title: Electrical Engineer Sr
    Job Number: 157130/1164
    Location: Dallas, TX
    Compensation: 60/hr
    Assignment Length: 12 month contract
    No clearance
    Non exempt




    Description
    FPGA Design Engineer. Lockheed Martin Missiles and Fire Control is looking for a Field Programmable Gate Array (FPGA) Design Engineer in Grand Prairie, TX. Digital Design encompasses the full life cycle of electronic subsystems development. As such, the FPGA Design Engineer will be responsible for development, integration and test of processor subsystem features and interfaces in FPGA hardware. Tasks include requirements development, FPGA code development, test bench development, verification, synthesis, timing analysis, unit test, and support of debug and system integration activities. Additional responsibilities include task estimation, design trade studies, interface definitions, architecture definition, schematic entry, circuit card physical layout and manufacturing oversight.

    Skill/Experience/Education
    Mandatory:

    Bachelor’s degree or higher in Electrical Engineering with a concentration in FPGA design and Digital Signal Processing through either coursework or relevant experience. Good oral, written communication and presentation skills to interface with subordinates, peers, supervisors and customers are required. Experience with VHDL, Verilog, or System Verilog languages is required. Position requires excellent testing and troubleshooting skills. Proficiency with electronic analyzers and other test equipment is required.
    Desired:

    Experience with Synopsis Synplify, Synopsis VCS, ChipScope tool sets is desired. Experience with Xilinx and Altera Part family internal FPGA fabric, IP, and model based compilers desired. Previous experience related to military/aerospace design techniques is desired.

    Skill Matrix
    Skill Name Description Level (1-5, 5 being the highest)
    1 2 3 4 5 Years Mandatory(Yes/No)
    FPGA Verification 4-5 Years Yes
     
    Job Number: DW-1164
    Job Location: Dallas, TX
    Rate: 60/hr max
    Duration: 12 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineering Consultant - Cabin Systems

    Description:
    UNIQUE SKILLS
    Ideal Candidates will have electrical engineering experience with Cabin Interiors and Systems to include but not limited to: -Cabin Management System -Cabin Entertainment System -Cabin Lighting -Cabin Switch Controls -Telephone System -Satellite communications -Water System -Waste System
     
    Job Number: 16-652-88883
    Job Location: Southeast
    Rate: $58.00 to $63.00/per hour
    Per Diem: Split
    Overtime: Possible
    Duration: 6 mths +
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineering Consultant - Cabin Systems

    Description:
    Electrical Engineering Consultant – Cabin Systems

    Location: Savannah, GA
    Pay Rate: $58/hr - $63/hr
    Duration: Long Term Contract
    Shift: 4x10

    Unique Skills:
    Ideal Candidates will have electrical engineering experience with Cabin Interiors and Systems to include but not limited to:
    -Cabin Management System
    -Cabin Entertainment System
    -Cabin Lighting
    -Cabin Switch Controls
    -Telephone System
    -Satellite communications
    -Water System
    -Waste System

    Education and Experience Requirements:
    Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.
     
    Job Number: 6890
    Job Location: Savannah, GA
    Rate: 58.00-63.00
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Harness Engineer

    Description:
    � Produce and maintain wire harness assemblies, utilizing the CATIA V5 Electrical and Sheet Metal Work Benches.
    � Capable of interfacing with wiring diagrams, system and EMI/EMC requirements.
    � Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.

    Unique Skills:

    7000 hours CATIA V5, Electrical Work Benches required

    Experience/Education:

    BSME/BSEE or equivalent experience
     
    Job Number: 24-155
    Job Location: Savannah, GA
    Rate: $56 to $67 per hour
    Per Diem: YES
    Overtime: YES
    Duration: 1 year plus
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Harness Installation

    Description:
    Job description: Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD. Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area. Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches. Capable of interfacing with wiring diagrams, system, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. • Aerospace Experience is required • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required • Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative • Knowledge of Catia V5 Electrical is required
     
    Job Number: Electrical Harness Installation
    Job Location: GA
    Rate: 58-63
    Per Diem: yes
    Overtime: yes
    Duration: LT
    Start Date: asap
    Input Date: 11/14/2020
    Firm Name: SOURCE GROUP PROFESSIONALS INC
    Attention: Recruiter
    Address: 4729 E SUNRISE DR STE 244
    City, State: TUCSON, AZ 85718
    800 Phone: 888/352-8797
    Fax Phone: 866/835-2145
    Website: www.sourcegrouppros.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Harness Installation Engineer

    Description:
    UNIQUE SKILLS
    Required Applicant shall: Develop Electrical Wiring Interconnect System (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing the CATIA V5 Electrical Work Benches. Capable of interfacing with wiring diagrams, system and EMI/EMC requirements. Job Description Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 yrs. in specific technical discipline or 10 yrs. broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters, 4 yrs. for PhD in fields applicable to this job. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

    PRINCIPAL DUTIES AND RESPONSIBILITIES
    ESSENTIAL FUNCTIONS
    1. Contributes to planning, developing and coordinating of important engineering projects
    2. Provides specialized technical assistance to team members
    3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    4. Determines and develops own approach to solutions within schedule and cost objectives
    5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
    6. Acts as liaison with representatives outside of the assigned group/area

    ADDITIONAL FUNCTIONS
    1. Actively works to improve daily processes and ensures all work meets customer requirements
    2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
    3. Performs other duties as assigned

    OTHER REQUIREMENTS
    1. Advanced degree in engineering related field preferred
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 16-633-80162
    Job Location: Southeast
    Rate: $58.00 to $63.00/per hr.
    Per Diem: Split
    Overtime: Possible
    Duration: 6 mths +
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Harness Installation Engineer

    Description:
    Electrical Harness Installation Engineer

    Location: Savannah, GA
    Rate: $58.00 - $63.00/HR
    Long Term contract


    Required Applicant shall:
    - Develop Electrical Wiring Interconnect System (EWIS), capable of resolving all technical issues relating to EWIS.
    - Produce and maintain wire harness assemblies, utilizing the CATIA V5 Electrical Work Benches.
    - Capable of interfacing with wiring diagrams, system and EMI/EMC requirements.

    Education:
    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

    Position Purpose:
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

    Principal Duties and Responsibilities:
    Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

    Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 6522
    Job Location: Savannah, GA
    Rate: $58.00 - $63.00/HR
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Harness Installation Engineer

    Description:
    Electrical Harness Installation Engineer
    Savannah, GA
    Rate: $58-$63

    Unique Skills:

    Aerospace experience is required. Knowledge of Catia V5 is required. Candidate must be able to design wire harness assemblies and installations utilizing the Catia V5 Electrical and Sheet Metal Work Benches. Must have intimate knowledge of an ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements, while meeting all installation and maintainability requirements. Candidate must possess knowledge of regulatory guidance material relative to aircraft harness design. Excellent verbal and written communication skills, and computer skills (Catia V5, Catia V4, PC/MS Office) are required. Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.

    Job description: Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

    Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

    Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 6106
    Job Location: Savannah, GA
    Rate: $58-$63
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Harness Installation Engineer

    Description:
    Electrical Harness Installation Engineer


    Location: Savannah, GA
    Rate: $58.00 - $63.00/HR
    Long Term contract
    1st Shift


    Unique Skills:
    Required Applicant shall:
    - Develop Electrical Wiring Interconnect System (EWIS), capable of resolving all technical issues relating to EWIS.
    - Produce and maintain wire harness assemblies, utilizing the CATIA V5 Electrical Work Benches.
    - Capable of interfacing with wiring diagrams, system and EMI/EMC requirements.

    Education:
    Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 years in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

    Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

    Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 6794
    Job Location: Savannah, GA
    Rate: $58.00 - $63.00/HR
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Harness Installation Engineer

    Description:
    Electrical Harness Installation Engineer

    Location: Savannah, GA
    Rate: $58.00 - $63.00/HR
    Long Term contract


    Requirements:
    1. Advanced degree in engineering related field preferred
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches. Capable of interfacing with wiring diagrams, system, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
    • Aerospace Experience is required
    • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
    • Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
    • Knowledge of Catia V5 Electrical is required

    Job description:
    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

    Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area.
     
    Job Number: 6881
    Job Location: Savannah, GA
    Rate: $58.00 - $63.00/HR
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Systems Engineer

    Description:
    Johnson Service Group is seeking an Electrical and Utility Systems Engineer for a 2- year contract opportunity for our client in Stratford, CT!
    � Support design, development, and test of Electrical Power and Utility Subsystems.
    � 5 to 7 years relevant experience
    � BS in Engineering Electrical or Aerospace
    � Experience with DOORS highly preferred.
     
    Job Number: 352692
    Job Location: Stratford, CT.
    Per Diem: If Qualified
    Overtime: Possible
    Duration: 2 yrs
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Linda Peck
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Tech Designer

    Description:
    Job Description:

    Develops, maintains and releases electrical/mechanical drawings, systems designs or engineering documentation and data by applying company, industry and governmental standards. Using design tools prepares documentation and incorporates design changes. Creates, develops and maintains systems designs by preparing design layouts, modifying existing designs and assisting in identifying design discrepancies. Supports engineering system design and functionality validation activities. Develops and maintains product installation designs and part designs ranging from simple to moderately complex. Coordinates activities and products with internal partners and external suppliers. Works under general direction.

    Education / Experience:

    AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.
     
    Job Number: 24331-1
    Job Location: North Charleston, SC
    Rate: Open
    Per Diem: Split
    Overtime: Possible
    Duration: 12 mos
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: APOLLO PROFESSIONAL SOLUTIONS
    Attention: Michelle Fox
    Address: WESTRIDGE OFFICE PARK
    2646 HIGHWAY 109 STE 207

    City, State: WILDWOOD, MO 63040
    Phone: 636/438-0312
    800 Phone: 866/277-3343
    Fax Phone: 636/220-8284
    Website: www.apollopros.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Wire Design & Installation (PA)

    Description:
    Leads, develops, maintains and releases electrical/mechanical drawings, systems designs or engineering documentation and data by applying Company, industry and governmental standards for multiple customers. Manages, interprets and develops design requirements. Uses design tools to document and maintain configuration design control. Manages, creates, develops and maintains complex systems designs by preparing design layouts, modifying existing designs and integrating systems elements. Validates complex engineering system design and functionality. Leads the process for product installation designs and part designs ranging from simple to complex. Coordinates activities and products with cross-functional groups, internal partners and external suppliers. Reviews and assigns work to others. Works under minimal direction.

    Additionally...
    _Aerospace experience is desired, but not required.
    _Candidates with Automotive wire harness routing / MBD experience will be considered.
    _Prior experience with Wire Harness Installation design in the aerospace field is preferred.
    _Proven Advanced CATIA V5. Resume must clearly state the experience and prove level of proficiency for CATIA V5.
    _Proven Advanced Teamcenter(IPDM).
    _Proven Advanced MBD (Model Base Definition).
    _Mandatory Candidates must have recent experience (within the last year) in designing, developing, maintaining and releasing wire harness drawings and 3D Model based definition data packages using CATIA V5, the electrical workbench, and Teamcenter/ IPDM.
    _Must have am AA degree in Electrical Engineering Technology or Engineering.

    AA degree in related discipline and typically 6 or more years of related experience or an equivalent combination of education and experience. Additionally, AA Degree must be in either Engineering or Electrical Engineering Technology.
     
    Job Number: EEDesignPA
    Job Location: Ridley Park, PA
    Rate: up to $45/hour
    Per Diem: YES
    Overtime: Possible
    Duration: 3+ months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INNOVA SOLUTIONS, INC
    Attention: Janice Plattner
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.innovasolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical/Mechanical 3-D Wire Routing Engineer - Engineer Consultant

    Description:
    UNIQUE SKILLS
    Ideal Candidates will have electrical/mechanical engineering experience with Cabin Interiors and Systems to include but not limited to: -3D wire routing -EWIS -Cabin Management System -Cabin Entertainment System -Cabin Lighting -Cabin Switch Controls -Telephone System -Satellite communications -Water System -Waste System -Cabin interior monuments -Seats
     
    Job Number: 16-654-88884
    Job Location: Southeast
    Rate: $58.00 to $63.00/per hour
    Per Diem: Split
    Overtime: Possible
    Duration: 6 mths +
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical/Mechanical 3-D Wire Routing engineer

    Description:
    Electrical/Mechanical 3D Wire Routing Engineer – Engineer Consultant

    Location: Savannah, GA
    Pay Rate: $58/hr - $63/hr
    Duration: Long Term Contract
    Shift: First

    Unique Skills:
    Ideal Candidates will have electrical/mechanical engineering experience with Cabin Interiors and Systems to include but not limited to:
    -3D wire routing
    -EWIS
    -Cabin Management System
    -Cabin Entertainment System
    -Cabin Lighting
    -Cabin Switch Controls
    -Telephone System -Satellite communications
    -Water System
    -Waste System
    -Cabin interior monuments
    -Seats

    Education:
    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.
     
    Job Number: 6884
    Job Location: Savannah, GA
    Rate: $58-$63
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electronic Avionics Systems Design & Analysis Engineer (MO)

    Description:
    ACTIVE SECRET CLEARANCE REQUIRED TO START.

    The F-15 Integration team is seeking an avionics integration engineer to support integration of new CNI avionics equipment into the F-15 architecture. Specifically, we have a new Signal Interface Unit (SIU) and MIDS JTRS data link equipment which needs to be integrated. This engineer will be responsible for running line item team meetings for each configuration change. This person will also be responsible for defining all Pilot Vehicle Interface (PVI) changes, including interaction with Boeing and USAF aircrews. The applicant will work on all aspects of system and subsystem requirements development, including software requirements, laboratory test requirements, laboratory test support and flight test support. Technical writing to support Technical Publication development and aircrew training will also be required. Previous experience with avionics integration, design or test and project team participation is required. Previous experience with the DOORS requirements management tool is desired. Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
     
    Job Number: EEmo
    Job Location: Berkeley, MO
    Rate: OPEN
    Per Diem: YES
    Overtime: Possible
    Duration: 12+ Months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INNOVA SOLUTIONS, INC
    Attention: Janice Plattner
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.innovasolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electronic Design & Analysis Engineer III (OH)

    Description:
    Electrical Design and Analysis Engineer Assignment - Level 3 – Skill Code: 676-Digital and Analog Circuits Analysis:
    Analyzes customer and system requirements to develop basic architectural approaches and detailed specifications for various electronic products. Develops high-level and detailed designs consistent with requirements and specifications. Validates designs through various methods of review, testing and analysis. Identifies, tracks and statuses technical performance measures to measure progress and ensure compliance with requirements. Supports Supplier Management with make/buy recommendations and other technical services of limited scope. Provides engineering support throughout the lifecycle of the product. Investigates emerging technologies to develop concepts for future product designs to meet projected requirements. Works under general direction.

    Additionally…
    Candidate needs to have reliability analysis experience.

    Must be able to obtain Secret Clearance shortly after start date--all candidates are welcome to apply with or without prior Clearance.

    Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.
     
    Job Number: EEoh
    Job Location: Heath, OH
    Rate: OPEN
    Per Diem: YES
    Overtime: Possible
    Duration: 12+ Months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INNOVA SOLUTIONS, INC
    Attention: Janice Plattner
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.innovasolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electronic Design & Analysis Engineer V (CA) - Digital / Analog

    Description:
    Architect, design, and develop high-speed communications modem hardware. Responsible for ensuring requirement flow down during design, checking work product for quality, and performing requirement verification during integration and conduct sell-off. Be part of and lead team of board, subsystem, and FPGA designers.

    Architect, design, and develop Single board computer/Communication network hardware - Switches, Servers, Network Attached Storage (NAS). Responsible for ensuring requirement flow down during design, checking work product for quality, and performing requirement verification during integration and conduct sell-off.

    BSEE, MSEE, or PhD from an accredited course of study, in electrical engineering or computer engineering with more than 15 years of industry experience developing high-speed communication modems AND/OR communication network equipment - switches, routers, servers, network attached storage.

    Must be expert in either: 1) ADC/DACs, signal processing algorithms, electrical board design, unit design, requirement decomposition, hardware specification, architecture, implementation, verification, integration and test or 2)
    sbc, network communication hardware architecture, development using the following: Intel /ARM Ax processors, SSD SATA controller, high capacity NAND Flash, SSD SATA, Raid Controller, DDR4, GbE controller, GbE switch, 10/100/1000 Base-T GbE Transceiver, GigE controller, POE PSE

    We also offer full medical, dental, vision, and 401k, including a bonus plan.

    We can also give you the per diem split if you qualify.
     
    Job Number: ElectCA
    Job Location: El Segundo, CA
    Rate: OPEN
    Per Diem: YES
    Overtime: Possible
    Duration: 2+ Months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INNOVA SOLUTIONS, INC
    Attention: Janice Plattner
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.innovasolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electronic Fabricators / EMI Harness Technicians

    Description:
    1. Assemble required wiring harnesses, test boxes, and laboratory test equipment.

    Skills/Experience
    - Experience with electrical and electronic fabrication.
    - Must have experience with fabrication of Military style connectors and aircraft wiring harnesses and systems.
    - Experience with all the tooling and dies required to terminate mil-spec wires
    - Experience terminating EMI harness assemblies
    - Experience fabricating wire harnesses
    - Experience fabricating test sets
    - Experience using hand tools, mechanical and electrical
    - Experience with schematics and electrical diagrams
    - Evidence of Lockout Tag Out Authorized training

    Other Requirements:
    - Requires Safety shoes
    - Must be able to support extended shift operations, scheduled weekend work, possible shift changes.
     
    Job Number: 353185
    Job Location: Stratford, CT.
    Per Diem: Split Possible
    Overtime: Yes
    Duration: 1 year +
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Linda Peck
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electronic Systems Design & Analysis Engineer III (MO)

    Description:
    • Maintaining the EFHD operational and performance requirements in the Procurement Specification (PS).
    • Overseeing supplier analysis and allocation of the PS requirements into the final EFHD design.
    • Overseeing completion of the supplier design and development activity for EFHD which includes completion of supplier qualification testing.
    • Overseeing Boeing integration testing of the EFHD capability. This will include reviewing test procedures and conducting testing in the Boeing Electronic System Integration Laboratory.
    • Overseeing the completion of flight test of EFHD. This will include coordinating flight test plans, reviewing test procedures, analyzing results, and coordinating actions with the supplier.
    • Overseeing the transition of EFHD to a production phase. This will include support for closing out conducting a Functional Configuration Audit (FCA), Physical Configuration Audit (PCA), First Article Inspection (FAI), and Production Readiness Review (PRR).

    Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
     
    Job Number: EEmo
    Job Location: Berkeley, MO
    Rate: up to $45/hour
    Per Diem: YES
    Overtime: Possible
    Duration: 12+ Months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INNOVA SOLUTIONS, INC
    Attention: Janice Plattner
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.innovasolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electronics Assembly Technician

    Description:
    Job Description:
    - Recognize the methods/sequences of assembly that are needed when complete information is not readily available and the appropriate action to be taken
    - Work from drawings, diagrams, and written instructions. Use hand and power tools to build, disassemble, modify, rework, reassemble and test circuit card assemblies (CCA) as required
    - Perform quality inspections and continuity checks on completed units
    - Bonding, staking, torquing, and tinning of electronics components
    - Complete all documentation related to work performed as required
    - Requires minimal supervision on routine tasks
    - Rework CCA's, remove conformal coating, unsolder Hybrid IC leads, and use Lead forming tooling on complex assemblies
    - Assemble magnetics - Participate in area and shift rotations
    - Follow applicable SS/L policies and procedures. Familiar with ISO 9000 Policies
    Ability to work any shift on a flexible schedule if required

    Requirements:
    - 2 years technical training or equivalent experience
    - Obtain NASA Solder Certification
    - 2 years of experience performing non-standard rework on 'flight' hardware.
    - Experience using a computer for entering data and using the internet
    - Proficient using standard assembly tools: cutters, crimpers, soldering irons, pin insertion/removal tools, and torque tools
    - Recent experience soldering under a microscope High School or equivalent
     
    Job Location: Palo Alto, CA
    Rate: Open
    Duration: 3 - 6 months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Sidney Williams
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electronics Systems Engineer CA

    Description:
    Job Title: Electronics Systems Engineer
    Job Number: 157691/4392
    Location: Torrance, CA
    Compensation: 50/hr
    Assignment Length: 6 month contract

    Description:

    The System Design Engineer participates in defining the overall technical solution by interfacing directly with project management and design engineers with the goal of providing system level architectures and trade spaces necessary to support the end-users technical, financial and schedule needs. Primary activities include creation of system architecture, performance prediction, system sizing analysis, creating technical requirements baselines and Verification and Validation planning

    • Meeting demanding performance requirements
    • Designing safety critical systems
    • Delivering systems that will perform to expectations in harsh environments
    Essential job functions: • Create block diagrams and definition of redundancies and system attributes to support performance safety requirements.
    • System box level architecture for all electronics requirements, environmental testing, verification metrics.
    • Interfacing with the customer and negotiation and clarification of requirements during PDR/CDR.
    • Integration testing and test support during qualification and certification
    • Preparing requirement compliance metrics
    • Act as a Project Manger for System Design portion of electronics development
    Required skills: • Ability to write clear and simple specification (DOORS)
    • Avionics experience required (Flight Control preferred)
    • Integration, test and qualification of electronic hardware
    • DO254 and ARP4754A guidelines and review process
    • Defining redundant systems to meet safety requirements
    • DO160 is a plus (Environmental & EMI/EMC)
    • Test Requirement for Test Equipment
    • Box level ATP generation
    • Box level Hardware/SW integration
    • Leadership skills - and Project Management experience
    Scope:
    Education: • BSEE - 5 - 10 years of experience
     
    Job Number: MB-4392
    Job Location: Torrance, CA
    Rate: 50/hr max
    Duration: 6 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrophysics Engineer (MO) - ACTIVE SECRET

    Description:
    The selected engineer will be responsible for new modes being integrated into the F-15. Responsibilities will include requirements definition, integration, analysis and test (lab and flight) of the new modes. This position requires close coordination with the F-15 Radar Supplier, USAF customers and other F-15 teams. Develops architectures to integrate systems and components into higher level systems and platforms. Performs trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around established requirements. Defines and conducts tests to validate performance of designs to requirements. Manages appropriate aspects of supplier and partner performance to ensure compliance to requirements. Provides support to products throughout their lifecycle by developing root-cause analysis of anomalies and other engineering support as requested. Supports project management by providing work statement, budget, schedule and other required inputs and by reporting project status. Works under general direction.

    This position requires an active Secret Security Clearance pre-start, with ability to obtain Special Access Clearances post-start.

    Previous avionics development experience is required. Previous experience with Radar systems is highly desired. Experience with Earned Value Management systems is desired.
    Radar systems Development
    Complete ability to develop new technology and designs for radar system components, subsystems, and systems and associated signal processing.

    Radar System Algorithms
    Complete knowledge and understanding of electromagnetic theory, radar systems, signal processing and software related to radar system algorithms. Complete ability to specify requirements, analyze performance and develop new algorithm technologies related to various type of radar sensor systems, including seekers, collision and threat avoidance, fire control and synthetic apertures.

    Requirements/Traceability
    Complete knowledge of how to derive and allocate requirements (e.g., system, sub-system, software) and show traceability throughout the product lifecycle

    Test Program Design
    Complete knowledge of test program design (e.g., design of experiments, test plan development, validation).

    Analytical Skills
    Skill and ability to: collect, organize, synthesize, and analyze data; summarize findings; develop conclusions and recommendations from appropriate data sources at the department level.

    Detailed Supplier Knowledge
    Complete knowledge of manufacturing, materials and assembly processes. A fundamental knowledge of business systems for example organizational structure, manufacturing processes, risk mitigation, capacity planning, past/present delivery performance, design definition, program directives, engineering drawings, change memos, wiring diagrams and schematics, functional tests, and supplier data.

    Bachelor's and 5 or more years' experience, Master's degree with 3 or more years' experience or PhD degree with experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
     
    Job Number: EEmo
    Job Location: Berkeley, MO
    Rate: OPEN
    Per Diem: YES
    Overtime: Possible
    Duration: 12+ Months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INNOVA SOLUTIONS, INC
    Attention: Janice Plattner
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.innovasolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineer II

    Description:
    Required:CATIA V5 experience required with specific knowledge of GD&T and the application of the FTA tool. Aerospace experience preferred. SmarTeam experience preferred

    Essential Functions and Key Responsibilities:
    1) Develops solutions to a variety of moderate complexity or unusual engineering or technical problems or assignments requiring judgment and ingenuity to work within current engineering protocols to design, develop and analyze aircraft structures, power plant component parts, mechanical and electrical systems and subsystems for commercial, military, executive, general aviation, or special purpose applications on operational aircraft.
    2) Analyzes and interprets engineering proposals to develop design for products.
    3) Reviews project documentation and proposed product specifications to determine design approaches.
    4) Confers with Project Management to clarify or resolve problems.
    5) Designs and develops structural, power plant and other operational and structural components that are used in operating aircraft. This includes producing or assisting in the production of computer aided drawings and engineering reports. 6) Designs and develops analytical programs concerned with ground or flight testing, or development of acoustic, thermodynamic, or propulsion systems.
    7) Tests models, prototypes, subassemblies, or production items to study and evaluate operational characteristics and effects of stress imposed during actual or simulated operational conditions.
    JOB QUALIFICATIONS: ENGINEER II Formal Education, Training, Professional Certification and Work Experience: Experience may be substituted for the formal education and training requirements in this section at the discretion of management. Technical Bachelor level degree in Engineering or the sciences or equivalent and three (3) to six (6) years related experience and/or training; or equivalent combination of education and experience.
     
    Job Number: 13001BR
    Job Location: Tulsa, OK
    Rate: 34.00
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: APA AVIATION STAFFING LLC
    Attention: Lisa A
    Address: 4150 INTERNATIONAL PLZ STE 510
    City, State: FORT WORTH, TX 76109
    Phone: 918/803-4005
    Website: apaservices.net

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineer III

    Description:
    JSG is looking for an Engineer III for a 6+ month contract opportunity in Irvine, CA!!!

    Job Description:
    Researches, analyzes, designs, and tests component parts, processes, or systems to develop new and/or improve core products. Develops and recommends solutions to engineering requirements for complex or specialized projects or systems, to ensure that design objectives are met. Applies engineering principles based on assigned engineering domain (e.g. mechanical; electrical; chemical, etc.).

    The ideal candidate will have strong, practical DO-178B development background in safety-critical real-time embedded software.

    Will have a principled knowledge of the DO-178B objectives but will be able to apply practical experience to efficiently meet them.

    Technically proficient with low-level software (e.g. device drivers, board support packages, built-in test), and will be fully fluent in C and assembly.

    Solid understanding of the interaction/interface between software and hardware but will not be required to debug the electronics hardware.

    5-7 years of experience in commercial (i.e. non-military) DO-178B programs.

    Highly practical & resourceful, and have had a demonstrated experience developing high-performance embedded software for Industrial applications.

    Strong familiarity with Linux, and also with real-time operating systems (e.g. QNX Neutrino).

    Technically proficient with low-level software (e.g. device drives, board support packages), and will be fully fluent in C and assembly.

    Solid understanding of the interaction/interface between software and hardware, and will be able to read schematics.

    Education:
    Bachelor degree (BS) (or Professional Engineer (PE) certificate) in an engineering or science technical discipline.

    Ability to perform the essential functions of the job typically acquired through 4-6 years of related experience.

    Knowledge of product area and domain and develops breadth of knowledge of industry practices, techniques, regulations, and policies.

    Proficient with engineering design and analysis tools (e.g. computer-aided design or modeling systems); ability to use standard software packages. May require capability using specialized software applications or languages.

    Ability to apply standard practices and techniques in specific situations, adjust and correlate data, recognize discrepancies in results, and follow operations through a series of related detailed steps or processes.
     
    Job Location: Irvine, CA
    Rate: Open
    Per Diem: Possible
    Duration: 6+ months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Sidney Williams
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineer Software 3 with active secret OK

    Description:
    Engineer Software 3 (Job Number: 16019810)

    Number of Openings: 1

    Location(s): United States-Oklahoma-Oklahoma City


    Shift: 1st Shift

    Target Start Date: Oct 31, 2016

    Rate: $55-$65/hr.

    Location: Oklahoma City, OK

    Duration: 1 Year (or less if assignment completes early)

    Work Week: 9/80a

    Clearance: Interim Clearance required

    Engineer Software - 3 (3)

    Designs, develops, documents, tests and debugs applications software and systems that contain logical and mathematical solutions. Conducts multidisciplinary research and collaborates with equipment designers and/or hardware engineers in the planning, design, development, and utilization of electronic data processing systems for product and commercial software. Determines computer user needs; analyzes system capabilities to resolve problems on program intent, output requirements, input data acquisition, programming techniques and controls; prepares operating instructions; designs and develops compilers and assemblers, utility programs, and operating systems. Ensures software standards are met.


    Basic Qualifications:

    5 Years with Bachelors in Science; 3 Years with Masters

    Experience with real-time, embedded software environment; Hands-on knowledge of Green Hills Integrity Operating System, Board Support Packages and Device Drivers; Multi-Threaded, RTI DDS software expertise are also required. .


    Candidate must possess an Interim Secret Clearance prior to start date
     
    Job Number: MB-16019810
    Job Location: Oklahoma City, OK
    Rate: 65/hr max
    Duration: 12 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineering Estimator / Scheduler

    Description:
    SUMMARY
    Perform timely and accurate forecasting cost for future engineering projects under general direction and in accordance with established company policies and procedures.

    RESPONSIBILITIES
    Work as a liaison estimator / scheduler between BCC and Engineering. While the position falls within the BCC, most direction will be taken from Engineering management.
    Receive and process bid requests from Sales/Estimating/Scheduling on future projects, ROMs, and change orders.
    Process cost estimating by breaking the project down into functions by engineering groups (Structures, stress, electrical, etc) and phases (design, check, approval, liaison, etc).
    Create/maintain a library of bid vs actual data. Analyzing over/under bid projects in order to have a more accurate database for future bids. Responsible for feeding the data back to the BCC to increase quote accuracy and speed.
    Develop and implement tools specific to engineering financial performance to help monitor and improve quality, schedule and budget.
    Calls meetings for large tasks that will require a significant coordination of data between engineering departments.
    Must be knowledgeable of engineering resources in order to estimate schedule impact. Coordination with Sales/Design on complex projects.
    Ensure that engineering resources are assigned to tasks in a way that supports A/C schedules set by the BCC. Maintain engineering schedule in order to assign company schedule impact.
    Participates in in-process data collection and team problem solving. Understands and has applied basic Continuous Improvement tools/principles 5S, Data-Driven Decision Making, 8 Wastes, Know Your Customer, and Communication Boards.
    Performs additional job duties as assigned.
    This position does not have supervisor responsibilities.

    LEVELS
    Knowledge
    Frequent use and general knowledge of industry practices, techniques, and standards. General application of concepts, and principles.

    Problem Solving
    Develop solutions to a variety of problems of moderate scope and complexity. Refers to policies and practices for guidance.

    Discretion / Latitude
    Works under only very general supervision. Work is reviewed for soundness of judgment and overall adequacy and accuracy.

    Impact
    Contributes to the completion of organizational projects and goals. Errors in judgment or failure to achieve results would normally require a moderate expenditure of resources to rectify.

    Liaison
    Frequent internal company and external contacts. Represents organization on specific projects.

    COMPETENCIES
    Ability to communicate details and expectations of bids to the engineering group. Demonstrate attention to detail, good communication skills, and personal organization. Ability to proactively research , analyze and interpret complex Engineering source data, read and interpret drawings and engineering specifications; also extract and comprehend typical engineering data (bill of materials, schematics, etc.).

    QUALIFICATIONS
    College degree or equivalent experience and knowledge in project costing. Should have excellent communication and interpersonal skills, and an in-depth knowledge of effective cost accounting and high computer proficiency. Strong analytical skills and the ability to work independently and able to meet deadlines with little supervision. Must be proficient in Excel. Experience in a target driven environment with the ability to set and exceed goals and improve business performance. Proficient in Excel, Word, Project, Outlook. Must be knowledgeable with engineering process as well as upfront and downstream requirements. Understand issues and proactively find solutions.

    Physical Demands
    Less than one third of the time is spent walking.
    More than two thirds of the time is spent sitting.
    Less than one third of the time is spent reaching with hands and arms.
    More than two thirds of the time is spent talking or hearing.
    Less than one third of the time is spent lifting up to 10 pounds.
    The position requires close vision.

    Working Environment
    The noise level is usually Quiet.
     
    Job Number: 16-596
    Job Location: Midwest
    Rate: OPEN
    Per Diem: Split
    Overtime: Possible
    Duration: 6 mths +
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Equipment and Furnishings Engineer

    Description:
    Equipment and Furnishings Engineer


    Location: Savannah, GA
    Rate: $58.00 - $63.00/HR
    Long Term contract
    1st Shift



    Unique Skills:
    Applicant shall:
    - Develop secondary structure, equipment and racks/panels to support the installation of Electrical Components.
    - Have a working knowledge of Electrical Wiring Interconnect System (EWIS) as well as latest DO-160 requirements, internal/external lighting, antenna installations and other unique Electrical Installation requirements.
    - CATIA V5 Work Bench capabilities should include Sheet Metal, part design and limited surfacing.

    Education:
    Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

    Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

    Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

    Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 6802
    Job Location: Savannah, GA
    Rate: $58.00 - $63.00/HR
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Cathy O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Equipment and Furnishings Engineer

    Description:
    Develop secondary structure, equipment and racks/panels to support the installation of Electrical Components. Have a working knowledge of Electrical Wiring Interconnect System (EWIS) as well as latest DO-160 requirements, internal/external lighting, antenna installations and other unique Electrical Installation requirements. CATIA V5 Work Bench capabilities should include Sheet Metal, part design and limited surfacing.

    Education and Experience Requirements:
    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.10 yrs in the specific technical discipline or 15 yrs broad engineering experience in several technical disciplines with Bachelors, or 8 yrs in the specific technical discipline with Masters, or 6 yrs in the specific technical discipline with PhD.

    Position Purpose:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services

    Essential Functions:
    1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
     
    Job Number: 24-134
    Job Location: Savannah, GA
    Rate: $58-$63
    Per Diem: YES
    Overtime: YES
    Duration: 1 YR+
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Equipment and Furnishings Engineering Consultant

    Description:
    UNIQUE SKILLS
    APPLICANT SHALL
    Develop secondary structure, equipment and racks/panels to support the installation of Electrical Components. Have a working knowledge of Electrical Wiring Interconnect System (EWIS) as well as latest DO-160 requirements, internal/external lighting, antenna installations and other unique Electrical Installation requirements. CATIA V5 Work Bench capabilities should include Sheet Metal, part design and limited surfacing.

    JOB DESCRIPTION
    Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD.

    Position Purpose
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of client products and services.

    PRINCIPAL DUTIES AND RESPONSIBILITIES
    ESSENTIAL FUNCTIONS
    1. Contributes to planning, developing and coordinating of important engineering projects
    2. Provides specialized technical assistance to team members
    3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    4. Determines and develops own approach to solutions within schedule and cost objectives
    5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
    6. Acts as liaison with representatives outside of the assigned group/area

    ADDITIONAL FUNCTIONS
    1. Actively works to improve daily processes and ensures all work meets customer requirements
    2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
    3. Performs other duties as assigned

    OTHER REQUIREMENTS
    1. Advanced degree in engineering related field preferred
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 16-648-83461
    Job Location: Southeast
    Rate: $58.00 to $63.00/per hour
    Per Diem: Split
    Overtime: Possible
    Duration: 6 mths +
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Experimental Aeromechanics - RM

    Description:
    JSG is seeking an Experimental Aeromechanics for a 12+ months contract opportunity in Stratford, CT!

    Job Duties:

    Layup of multi-layer composites, consisting of fiberglass and graphite, with other materials as required
    Composite testing specimens using Engineering Standard Work
    Provide for integration into the value stream for test specimen requirements within the fabrication process, along with R&D development projects.
    Dressing materials to the designated sizes, with support for static testing to define the material properties for Engineering.
    Provide written comments for peer review prior to test specimen preparation and planning.
    Process EWR's using machining skill set, while identifying the necessary activities related to quality machining.
    Skills & Experience Required

    5 + years’ relevant experience required.
    Ability to perform adhesive mixing, composite layup and curing Ability to read and interpret drawings in both hard copy and electronic form
    Provide a high level of attention to details for assembly of parts, including measurements with precision devices to high accuracy of 0.0001
    Ability to work independently with a high level of self-direction and competency.
    Ability to assemble complex composite assemblies related to rotorcraft, with an understanding to form, fit and function, while interacting with designers and test engineers on interferences and improved features
    Ability to document the tasks performed with a clear understanding to traceability, allowing changes in data and drawings to be revised
    Other Requirements:

    Flexibility to perform work within any given shift such as lifting of calibration weights, multiple climbing of stairs.
    Test related overtime
    Travel extending several weeks for offsite testing is required.
    Required hours are based on work task varying needs. Research level interactive process development with Engineers, and team worker, taking or giving direction Technician should be self - motivated, ethical for working hours charged, and demonstrates insight.
     
    Job Number: 353695
    Job Location: Stratford, CT
    Rate: $38hr
    Per Diem: yes
    Overtime: yes
    Duration: 12 month
    Start Date: asap
    Input Date: 11/14/2020
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Rich
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    F-15 Combat Aircraft Training Specialist IV (MO)

    Description:
    Develops, delivers and conducts customer training events for combat specific trainees via highly interactive courseware in state of the art electronic classrooms and simulator training devices at company and/or customer facilities. Provides input for developing and modifying engineering data, flight manuals, defining training requirements, standards and curriculum, schedules and related documentation. Pursues continuous process improvement. Serves as training liaison with internal and external customers. Demonstrates extensive knowledge of combat aircraft aircrew operations and training to resolve complex planning, coordination and development of requirements for multiple aircraft blocks, types and models. Oversees all phases of combat aircraft ground training delivery. Evaluates technical design features/changes to the operation of the combat aircraft systems and subsystems to assist the development of the physical/functional fidelity requirements to be incorporated into the applicable flight training devices. Participates and interfaces with operational level combat aircraft customers, customer test aircrews, company test aircrews and company engineering expertise via Technical Interface Meetings; Man-Machine Interface Meetings; Program Management Reviews, Program Design Reviews, and status meetings.

    Experience as a Pilot or Weapons System Operator in the F-15E/K/S/SG/C is required. Requires minimum of 5 years’ experience as a high performance fighter/attack aircrew with appropriate experience as Wingman, Element Lead, Flight Lead, Instructor Pilot, Weapons System Operator; Flight Examiner, Mission Commander or Pilot in Command. Platform instruction experience is required. Strong communication skills, and experience with Microsoft Office Products is a plus. Must be willing to travel for short term assignments. Must have a US SECRET clearance or be able to obtain one.
     
    Job Number: F15MO
    Job Location: Berkeley, MO
    Rate: OPEN
    Per Diem: YES
    Overtime: Possible
    Duration: 12+ Months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INNOVA SOLUTIONS, INC
    Attention: Janice Plattner
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.innovasolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Facilities Assistants - Greensboro, NC

    Description:
    STS AeroStaff Services is currently hiring Facilities Assistants for open positions in Greensboro, North Carolina.

    Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

    Job Purpose:

    Individual will work closely with the Facilities Maintenance Coordinator and Facilities Supervisor to support facilities systems, building and grounds activities. In addition this individual will support the activities of other groups within the Facilities Department.

    Job Duties:

    • Monitors contractor performance and works closely with outside vendors and contractors to ensure work is completed according to specifications.
    • Monitors and replaces light bulbs in all assigned facilities, as needed.
    • Perform scheduled preventative maintenance on all electrical equipment and systems to include Switchgear, Motors, Transformers, VFD’s, Lighting and Overhead Cranes.
    • Performs routine preventative and corrective maintenance of building, grounds, heating and ventilation and air conditioning systems.
    • Overall responsibility for the maintenance and repair of building system infrastructure, including upkeep of buildings, grounds, equipment and electrical systems.
    • Provide basic maintenance and repair of plumbing systems as directed, to include repair of leaking fixtures, unclogging drains.
    • Troubleshoot, maintain and perform basic repair of minor building electrical problems, such as changing lamps, ballasts, fixtures, switches, outlets.
    • Responds to emergency situations for the purpose of resolving immediate safety concerns.
    • Performs other maintenance duties as assigned by the Facilities Supervisor.
    • Duties may require the self-performance of certain activities relating to projects
    • Individual will also be responsible for the self- performance of task related to the building and grounds maintenance.
    • Understand and review all phases of construction inspection, facility inspection, and project monitoring related to space planning and renovation.
    • Review construction plans and detailed specifications to ensure alignment of project requirements.
    • Understand construction methods, materials, processes, and sequences of installation;
    • Assist in the logistics of contractor/supplier mobilization to perform work.
    • Assist in the coordination of contractor/supplier support for warranty repair execution;
    • Inspect completed work for defects and compliance with priority, scheduling, and specifications/requirements.
    • Complete/track work orders assigned by the Maintenance or Projects Supervisor.
    • Interface proficiently with Company’s CMMS (Computerized Maintenance Management System).
    • Coordinate/oversee contracted services during the performance of work.
    • Respond to equipment breakdowns and emergencies during off-hours.
    • Oversee and perform quality checks for planned work in the absence of supervisor.
    • Assist in the development of short interval schedules in coordination with planned work activities.
    • Perform other duties as requested or assigned.
    • Assists with inspections on life safety systems to include but not limited to fire extinguishers, fire pumps, emergency lighting and power generators, back-up power systems and elevators. Notifies Supervisor of corrective actions needed.
    • Adheres to safety policies, industrial practices.
    • Performs other duties assigned, including emergency call-in and shift rotation.

    Qualifications:

    • High School Diploma or GED certificate with four or more years of progressive and practical experience in HVAC or electrical systems.
    • Degree or certificate in HVAC or an Associate’s of Science Degree or related technology with a minimum of two (2+) years of experience
    • Basic knowledge of facilities maintenance and repair concepts required. Basic computer proficiency (Microsoft Office programs). Clean driving record and criminal background history.
    • CAD experience is a plus.

    Requirements:

    • Must be able to work any shift that client management determines necessary to support production demands.
    • Must possess the ability to troubleshoot equipment and system breakdowns utilizing schematics, drawings and equipment manuals.
    • Must be able to effectively communicate (oral and written) with all employees, contractors and vendors.
    • Self-starter and team player.
    • Understand and follow oral and written instructions.
    • Ability to prioritize and manage multi-functional tasks.
    • Ability to work effectively under pressure, and against strict time constraints.
    • Knowledge of doors/hardware (locksets, door closures, frames).
    • Basic understanding to advanced knowledge of PLC systems.
    • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.
    • Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
    • Incumbents may be required to stand, sit, squat, walk, bend, climb ladders, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
    • Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
    • Read, hear, speak, and see with no restrictions, as required by job duties.
    • Comprehend and adhere to management directions and/or safety instructions with no restrictions.
    • Effectively communicate in Business English language.
    • Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.
    • Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties.

    Benefits:

    STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

    We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

    Thanks for taking the time, and we look forward to hearing from you soon.
     
    Job Number: 36316
    Job Location: Greensboro, NC
    Rate: DOE
    Per Diem: No
    Overtime: Possible
    Duration: Temp
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STS AEROSTAFF SERVICES
    Attention: STS AeroStaff Services
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 800/800-2400
    Website: www.stsaviationgroup.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Facilities Technicians - Greensboro, NC

    Description:
    STS AeroStaff Services is currently hiring Facilities Technicians for open positions in Greensboro, North Carolina.

    Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

    Job Purpose:

    Individual will work closely with the Facilities Maintenance Coordinator and Facilities Supervisor to support facilities systems, building and grounds activities. In addition this individual will support the activities of other groups within the Facilities Department.

    Job Duties:

    • Monitors contractor performance and works closely with outside vendors and contractors to ensure work is completed according to specifications.
    • Monitors and replaces light bulbs in all assigned facilities, as needed.
    • Perform scheduled preventative maintenance on all electrical equipment and systems to include Switchgear, Motors, Transformers, VFD’s, Lighting and Overhead Cranes.
    • Performs routine preventative and corrective maintenance of building, grounds, heating and ventilation and air conditioning systems.
    • Overall responsibility for the maintenance and repair of building system infrastructure, including upkeep of buildings, grounds, equipment and electrical systems.
    • Provide basic maintenance and repair of plumbing systems as directed, to include repair of leaking fixtures, unclogging drains.
    • Troubleshoot, maintain and perform basic repair of minor building electrical problems, such as changing lamps, ballasts, fixtures, switches, outlets.
    • Responds to emergency situations for the purpose of resolving immediate safety concerns.
    • Performs other maintenance duties as assigned by the Facilities Supervisor.
    • Duties may require the self-performance of certain activities relating to projects
    • Individual will also be responsible for the self- performance of task related to the building and grounds maintenance.
    • Understand and review all phases of construction inspection, facility inspection, and project monitoring related to space planning and renovation.
    • Review construction plans and detailed specifications to ensure alignment of project requirements.
    • Understand construction methods, materials, processes, and sequences of installation.
    • Assist in the logistics of contractor/supplier mobilization to perform work.
    • Assist in the coordination of contractor/supplier support for warranty repair execution.
    • Inspect completed work for defects and compliance with priority, scheduling, and specifications/requirements.
    • Complete/track work orders assigned by the Maintenance or Projects Supervisor.
    • Interface proficiently with Company’s CMMS (Computerized Maintenance Management System).
    • Coordinate/oversee contracted services during the performance of work.
    • Respond to equipment breakdowns and emergencies during off-hours.
    • Oversee and perform quality checks for planned work in the absence of supervisor.
    • Assist in the development of short interval schedules in coordination with planned work activities.
    • Perform other duties as requested or assigned.
    • Assists with inspections on life safety systems to include but not limited to fire extinguishers, fire pumps, emergency lighting and power generators, back-up power systems and elevators.
    • Notifies Supervisor of corrective actions needed.
    • Adheres to safety policies, industrial practices. Performs other duties assigned, including emergency call-in and shift rotation.

    Qualifications:

    • High School Diploma or GED certificate with four or more years of progressive and practical experience in HVAC or electrical systems.
    • Degree or certificate in HVAC or an Associate’s of Science Degree or related technology with a minimum of two (2+) years of experience
    • Basic knowledge of facilities maintenance and repair concepts required. Basic computer proficiency (Microsoft Office programs). Clean driving record and criminal background history.
    • CAD experience a plus.
    • Must be able to work any shift that client management determines necessary to support production demands.
    • Must possess the ability to troubleshoot equipment and system breakdowns utilizing schematics, drawings and equipment manuals.
    • Must be able to effectively communicate (oral and written) with all employees, contractors and vendors.
    • Self-starter and team player.
    • Understand and follow oral and written instructions.
    • Ability to prioritize and manage multi-functional tasks.
    • Ability to work effectively under pressure, and against strict time constraints.
    • Knowledge of doors/hardware (locksets, door closures, frames).
    • Basic understanding to advanced knowledge of PLC systems.
    • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.

    Requirements:

    • Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
    • Incumbents may be required to stand, sit, squat, walk, bend, climb ladders, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
    • Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
    • Read, hear, speak, and see with no restrictions, as required by job duties.
    • Comprehend and adhere to management directions and/or safety instructions with no restrictions.
    • Effectively communicate in Business English language.
    • Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.
    • Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties.

    Benefits:

    STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

    We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

    Thanks for taking the time, and we look forward to hearing from you soon.
     
    Job Number: 36317
    Job Location: Greensboro, NC
    Rate: DOE
    Per Diem: No
    Overtime: Possible
    Duration: Temp
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STS AEROSTAFF SERVICES
    Attention: STS AeroStaff Services
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 800/800-2400
    Website: www.stsaviationgroup.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Control Engineer

    Description:
    This is a senior technical position associated with the design, development and integration of complex electronic flight control systems. An emphasis on digital control systems, Control Law design, sensors, reliability, and safety analysis applicable to flight vehicles should be in the successful candidate's background. Familiarity with analog circuit design and analysis is also desired.

    TASKS INCLUDE
    - Aircraft System Specification Analysis
    - Flight Control System Specification Development
    - Requirements allocation to Component
    - Control System/CLAW Detailed Design
    - System Integration and Verification Evaluation
     
    Job Number: 16-506-28661
    Job Location: Northeast
    Rate: Open
    Per Diem: Split
    Overtime: Possible
    Duration: 6 mths +
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Control Engineer - RM

    Description:
    Johnson Service Group is seeking a Flight Control Engineer for our client in Stratford, CT!

    Job Description:

    Support the design and test of electronic flight control systems.
    Experience with Mat Lab, Doors, and Engineer Test Procedures is required. Individual should be able to develop flight control algorithms utilizing Mat Lab toolset

    Duration: 2-year Contract
     
    Job Number: 352693
    Job Location: Stratford, CT
    Rate: Open
    Per Diem: Yes
    Overtime: Yes
    Duration: 2 years
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Richard Martinsen
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Sciences

    Description:
    Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

    The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations.

    Seeking multiple contract or fulltime Flight Sciences Engineers to join the teams in Seattle and Moses Lake with at least five years� experience in flight sciences, including:
    - Stability & Control
    - Aircraft Performance
    - 6DOF Flight Simulation

    Essential functions:
    � Define and validate flight test specifications
    � Perform data review and analysis for verification of aircraft level requirements
    � Utilize flight simulation models and data
    � Support ground and flight test activities
    � Prepare flight test reports

    Desired Qualifications:
    � Flight Sciences Engineer with experience with FAA Part 25 or Part 23 aircraft certification
    � Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
    � A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
    � Ability to represent the client professionally and positively during client interactions and meetings.
    � Bachelor or advanced degree in Aerospace Engineering.

    If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

    Candidates must have legal authorization to work in the United States, Canada or Mexico
     
    Job Location: Seattle, WA
    Per Diem: possible
    Overtime: Yes
    Duration: lt
    Start Date: asap
    Input Date: 11/14/2020
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Miguel Calderon
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Avionics Electrical

    Description:
    PURPOSE
    To conduct avionics/electrical flight testing of the CH-53K aircraft at Pax River.

    JOB DUTIES
    1. Conduct pre-flight briefings and post flight de-briefings
    2. Provide in-flight test leadership
    3. Conduct data monitoring
    4. Reduce and Evaluate flight test data
    5. Write flight test reports
    6. Support system trouble shooting and root cause analysis

    EDUCATION AND EXPERIENCE REQUIRED
    7 + years' related experience
    Bachelor’s Degree in related field (E.E./Aeronautical Eng. etc...)

    OTHER ASSIGNMENT DETAILS
    Initial program/system familiarization will be at the Development Facility Center in West Palm Beach, FL.
     
    Job Number: 16-645-1469
    Job Location: Southeast
    Rate: Open
    Per Diem: Split
    Overtime: Possible
    Duration: 6 mths +
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Engineer

    Description:
    Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.
    This position will be in the Test and Evaluation Support unit, which has four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations.

    The Instrumentation Engineer is responsible for supporting the operational and technical success of the instrumentation group. This person works closely with all other Instrumentation Engineers, Technicians, other T&E Support Staff to meet instrumentation requirements.

    Job Duties and Responsibilities (Essential Functions):

    � Provide instrumentation services: to include:
    o production of instrumentation specifications, sensor selection, wire diagrams, installation diagrams (FTEO packages), sensor and system calibration, signal conditioning, derived parameters, cockpit displays, data validation, data tracking, data recording, documentation and conformity.
    o Ensuring that the instrumentation systems and deliverables meet quality standards as well as all customer specifications to include accuracy, resolution, and frequency range, and function correctly within harsh operating conditions typical of aircraft.
    o Provide instrumentation equipment management to ensure that equipment is maintained, calibrated and available for re-use to minimize waste.
    � Provide instrumentation technical input: advise the organization in regards to technical information for the best technical selection of sensors and support equipment at affordable costs. Works closely with Product Development Unit when new equipment and systems are required or for the design of Flight Test safety equipment, or any complex mechanical installations that require stress approval.
    � Support Program Teams: Works with OEM & STC program and project managers with technical resources requirements. Fully supports the test planners in regards to their instrumentation needs.


    Knowledge/Skills/Abilities:
    � Intermediate knowledge skills and competency of Flight Test Instrumentation (FTI) and data equipment for the purpose of recording and monitoring parameters fitted to experimental aircraft including associated of industry processes and practices to include:
    o Electrical and avionics design,
    o Data Systems Design Principles
    o Telemetry
    o Air data booms (straight nose and swivel-head)
    o Static trailing cones
    o Sensitive aircraft instruments
    o Cockpit displays
    o End-user interface
    o Portable test equipment such as hand-held stick force gauges
    o High-end GPS receivers and antennas for precise aircraft positioning
    o Position transducers - sting potentiometers, rotary potentiometers, LVDTs, RVDTs
    o Pressure transducers
    o Flowmeters
    o Temperature sensors - thermocouple wire/probes/assemblies, RTD probes, thermistors, glass bulb thermometers
    o Strain gauges, load cells, force transducers, torque sensors
    o Portable weather stations - wind speed/direction, outside air temperature, relative humidity
    o Video recording equipment
    o Signal conditioners
    o Data acquisition systems and data loggers
    � Intermediate knowledge of flight test operations and flight certification.

    Level Requirements (Minimum):
    Education
    � Formal Instrumentation Training (Military or Civilian) � Preferred
    � BS in Engineering or equivalent experience

    Experience
    � 5+ years relevant technical experience
    � Intermediate understanding of flight and ground test planning and test conduct, and test data analysis.
     
    Job Location: Seattle, WA
    Per Diem: possible
    Overtime: possible
    Duration: LT
    Start Date: asap
    Input Date: 11/14/2020
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Lacey Clark
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Engineer

    Description:
    DUTIES:

    � Develop System Test Plans, execute simulator and system flight tests, and document test results. This includes determining, communicating, and documenting flight test objectives, and developing test cards accordingly.
    � Participate in flight readiness reviews, test event briefs, and post-test debriefs with UAV Operators and Observers.
    � Coordinate the use of test ranges with UAV Operators and Observers.
    � Ensure test assets are prepared to support testing, including checking that product hardware and software are properly configured, test cards and procedures are written, equipment is operational, batteries are charged, etc.
    � Participate in test activities, fill in test data sheets, and transfer telemetry files to the network.
    � Debrief engineering and management team on results of flight and simulator tests.
    � Capture test failure details in defect reports, using an issue tracking system, like Bugzilla or JIRA.
    � Position may require up to 25% travel.

    QUALIFICATIONS:
    � Bachelor�s Degree (strongly preferred) from an accredited University in Electrical Engineering, Software Engineering, Aerospace Engineering, or a related discipline.
    � 7+ years of experience in multiple engineering projects including research and development efforts, with a focus on unmanned aircraft systems, simulation, integration, and test. Demonstrated ability to successfully contribute to successful short term projects (3 � 9 months).
    � Familiarity with unmanned aircraft systems, including avionics, power, and Ground Control Stations (GCS�s).
    � Minimum 3 years of experience conducting system tests or flight tests.
    � Ability to develop ad hoc tests to troubleshoot test failures.
    � Ability to analyze test data using software tools like MATLAB or Excel.
    � Desired hands on lab experience in test engineering, including use of test and measurement equipment.
    � Strong computer skills including Microsoft Office, engineering analysis tools (e.g., MATLAB, Simulink), and software development environments (e.g., Visual Studio).
     
    Job Location: Simi Valley, CA
    Rate: Open
    Duration: 6 months potential to be Permanent
    Start Date: Immediate
    Input Date: 11/14/2020
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Sidney Williams
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Engineers - Secret

    Description:
    **Must have Active Secret Clearance
    Experience in control and tracking of aircraft configuration, coordinating and staging of support equipment, along with coordinating with others organizations.
    Aircraft maintenance experience at a supervisor level.
    Experience in Fault Isolation.

    Desired Skills: Flight test control engineering experience to include: applications and electronic tools: JEDI, ATLAS, PDM, and JDL and wiring diagrams; aircraft ground test experience.
     
    Job Number: Lock-Flight Test
    Job Location: Patuxent River, MD
    Rate: $40.00-$50.00/hour
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PDS TECH COMMERCIAL, INC
    Attention: Mary Ann McCarthy
    Address: 1215 FERN RIDGE PKWY STE 231
    City, State: ST LOUIS, MO 63141
    Phone: 314/628-9143
    800 Phone: 800/472-3737
    Fax Phone: 314/628-9485
    Website: www.pdstech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Instrumentation Engineer

    Description:
    Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

    The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations
    This Flight Test Instrumentation Engineers will work to design and install instrumentation to support the collection of flight test data. The ideal candidate is self-motivated, detail oriented, and knowledgeable on instrumentation theory.

    Currently looking for experienced Instrumentation Engineers with aerospace or automotive backgrounds to fill openings with an aerospace flight test, engineering and certification organization located in the Seattle, WA area. The ideal candidate will have formal instrumentation training and 2 - 15 years of Instrumentation Engineering experience.

    Responsibilities:
    ● Produce instrumentation specifications, sensor selection, wire diagrams, installation diagrams (FTEO packages), sensor and system calibration, signal conditioning, derived parameters, cockpit displays, data validation, data tracking, data recording, documentation and conformity.
    ● Ensure that the instrumentation systems and deliverables meet quality standards as well as all customer specifications to include accuracy, resolution, and frequency range, and function correctly within harsh operating conditions typical of aircraft.
    ● Provide instrumentation equipment management to ensure that equipment is maintained, calibrated and available for re-use to minimize waste.
    ● Provide instrumentation technical input: advise the organization in regards to technical information for the best technical selection of sensors and support equipment at affordable costs.
    ● Work closely with Product Development Unit when new equipment and systems are required or for the design of Flight Test safety equipment, or any complex mechanical installations that require stress approval.

    Requirements:
    ● Formal Instrumentation Training (Military or Civilian) � Preferred
    ● Bachelor�s degree in Engineering or equivalent experience
    ● 2 - 15+ years Instrumentation Engineering
    ● 5+ years relevant technical experience
    ● Intermediate understanding of flight and ground test planning and test conduct, and test data analysis.

    If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

    Candidates must have legal authorization to work in the United States, Canada or Mexico
     
    Job Number: INST/ORL
    Job Location: Seattle, WA
    Per Diem: possible
    Overtime: yes
    Duration: LT
    Start Date: asap
    Input Date: 11/14/2020
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Lacey Clark
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Instrumentation Engineer

    Description:
    Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

    The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations
    This Flight Test Instrumentation Engineers will work to design and install instrumentation to support the collection of flight test data. The ideal candidate is self-motivated, detail oriented, and knowledgeable on instrumentation theory.

    Currently looking for experienced Instrumentation Engineers with aerospace or automotive backgrounds to fill openings with an aerospace flight test, engineering and certification organization located in the Seattle, WA area. The ideal candidate will have formal instrumentation training and 2 - 15 years of Instrumentation Engineering experience.

    Responsibilities:
    ● Produce instrumentation specifications, sensor selection, wire diagrams, installation diagrams (FTEO packages), sensor and system calibration, signal conditioning, derived parameters, cockpit displays, data validation, data tracking, data recording, documentation and conformity.
    ● Ensure that the instrumentation systems and deliverables meet quality standards as well as all customer specifications to include accuracy, resolution, and frequency range, and function correctly within harsh operating conditions typical of aircraft.
    ● Provide instrumentation equipment management to ensure that equipment is maintained, calibrated and available for re-use to minimize waste.
    ● Provide instrumentation technical input: advise the organization in regards to technical information for the best technical selection of sensors and support equipment at affordable costs.
    ● Work closely with Product Development Unit when new equipment and systems are required or for the design of Flight Test safety equipment, or any complex mechanical installations that require stress approval.

    Requirements:
    ● Formal Instrumentation Training (Military or Civilian) � Preferred
    ● Bachelor�s degree in Engineering or equivalent experience
    ● 2 - 15+ years Instrumentation Engineering
    ● 5+ years relevant technical experience
    ● Intermediate understanding of flight and ground test planning and test conduct, and test data analysis.

    If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

    Candidates must have legal authorization to work in the United States, Canada or Mexico
     
    Job Number: INST/SEA
    Job Location: seattle, wa
    Per Diem: possible
    Overtime: possible
    Duration: LT
    Start Date: asap
    Input Date: 11/14/2020
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Susan McGlinsey
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Instrumentation Technician

    Description:
    This individual in this position will work with engineers to design and install instrumentation to support the collection of flight test data. The ideal candidate is self-motivated, detail oriented, and knowledgeable on instrumentation theory.
    Responsibilities:
    � Reading and creating wire diagrams.
    � Selecting or auditing appropriate sensors given engineering requirements.
    � Working with customers and engineers to define appropriate instrumentation requirements.
    � Designing instrument installations and creating installation instructions.
    � Instrumentation installation.
    � Evaluating instrumentation installations for function and safety.
    � Troubleshooting instrumentation problems.
    � Data acquisition system operation.
    � Documenting data system practices and procedures.
    � Generating instructions and operation manuals.
    � Developing sensor calibration and functional test procedures.
    � Maintaining calibration records.
    � Domestic and international travel may be required.
    Desired Qualifications:

    � 3+ years instrumentation experience in a testing environment. Aircraft flight test preferred.
    � Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
    � Ability to work interdependently, and lead small groups.
    � CATIA V experience beneficial.
    � Experience with data processing and analysis beneficial.
    � Computer programming experience beneficial.
    � Proficient in working with Microsoft Office applications including Word and Excel.
    If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

    Candidates must have legal authorization to work in the United States, Canada or Mexico
     
    Job Location: Moses Lake, WA
    Per Diem: possible
    Overtime: possible
    Duration: LT
    Start Date: asap
    Input Date: 11/14/2020
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Susan McGlinsey
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test with active secret MD

    Description:
    Lockheed Martin Aero 0322
    Job Title: Flight Test
    Location: PAX River, MD 20670
    Compensation: 40-50/hr (DOE)
    Assignment Length: 10 + month contract
    Security Clearance Secret (Prime Contract:N00019-02-C-3002, Can start w/o clearance:No, Interim Clearance Sufficient:Yes)
    Non Exempt
    3rd Shift

    Description:

    Flight Test Control Engineer for Navy F-35 test aircraft at Patuxent River NAS, Maryland. The successful applicant will provide Flight Test Ground and Flight Operations engineering support.

    Tasks will include coordination and execution of pre-flight and post-flight activities to ensure aircraft's test readiness including issuance, and closure of documentation relating to work performed on the aircraft, and coordination of aircraft modifications.

    Position is responsible for control and tracking of aircraft configuration, coordinating and staging of support equipment, and coordinating with other organizations associated with test readiness.

    Skill/Experience/Education
    Mandatory:

    Experience in control and tracking of aircraft configuration, coordinating and staging of support equipment, along with coordinating with others organizations.Aircraft maintenance experience at a supervisor level.

    Experience in Fault Isolation.

    Demonstrated Verbal and Written Communication skills across all levels of management. Ability to travel as required.

    Desired:

    Flight test control engineering experience to include: applications and electronic tools: JEDI, ATLAS, PDM, and JDL and wiring diagrams; aircraft ground test experience.
     
    Job Number: SW-0322
    Job Location: Pax River, MD
    Rate: 40-50/hr DOE
    Duration: 10 months +
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Graphics Designers - Melbourne, FL

    Description:
    STS AeroStaff Services is currently hiring Graphic Designers for open positions in Melbourne, Florida.

    Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

    Job Purpose:

    Assist with development and implementation of graphic materials for the worldwide marketing and sales teams. Interface with external creative agencies and graphics department as required. Ensure consistent corporate branding and product image quality.

    Job Duties:

    • Assist in development and implementation of worldwide graphic design strategies in conjunction with creative agencies to promote the client’s brand.
    • Plan creative concepts by gathering information and materials.
    • Manage digital assets: images touch up and post-processing, naming convention, managing the library (upload new assets, remove outdated ones, etc)
    • Provide creative direction and best practices advice on design layout and project’s technical specifications.
    • Ensures brand identity guidelines are being followed consistently worldwide.
    • Create and implement worldwide graphic marketing materials and presentations in both print and digital formats, including website graphics, print ads, email campaigns, signage, trade-show displays, invitations, photographs, videos and digital kiosks.
    • Create, update and enhance graphical depictions of aircraft performance, range maps, charts, etc. to promote the client brand.
    • Create, update and enhance presentations for the worldwide sales and marketing team.
    • Partners with other internal departments and third-party vendors for all creative and production needs.
    • Interface with Authorized Sales Representative (ASRs) and other departments to ensure any outside graphic development maintain client’s global branding guidelines.

    Qualifications:

    • BA or BFA Degree majoring in Graphic Design, with a concentration on web design fundamentals.
    • Minimum 1-5 years’ experience in graphic design and front-end web design required.
    • Fundamental understanding of visual design methods, philosophies and techniques
    • Experience with luxury products or similar services.
    • Aviation or Yachting experience preferred but not required.
    • Solid, well-organized portfolio of previous and recent work.

    Requirements:

    • Essential competency using most current versions of design software: InDesign, Photoshop, Illustrator (Adobe CS6 or Creative Cloud).
    • Working competency with HTML, CSS and other web graphic standards.
    • Good understanding of typography methods and applications.
    • Adobe After Effects, Premiere and Flash experience will be helpful, but not required.
    • Javascript or other software programming skills will be helpful, but not required.
    • Any 3D software skills and experience will be helpful, but not required.
    • Proficient in PowerPoint, Word and Excel.
    • Excellent skills with Photoshop, Illustrator and other graphic and layout software.
    • Good written and verbal communication skills.
    • Relevant experience with Digital Asset Management practices.
    • Competency of photography skills and practices preferred but not required.
    • Excellent organizational and interpersonal skills.
    • Self-starter.
    • Ability to travel domestically and internationally to support the marketing and sales departments. 10%-15% travel may be required.
    • Commitment to company values and compliance with department norms, policies, directives, and procedures.
    • Incorporates Lean and P3E processes and concepts into daily activities.
    • Strives for continuous improvement to processes and procedures.
    • Honors and protects confidential and proprietary documents and information.
    • Satisfies work schedule requirements.

    Benefits:

    STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

    We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

    Thanks for taking the time, and we look forward to hearing from you soon.
     
    Job Number: 30352
    Job Location: Melbourne, FL
    Rate: DOE
    Per Diem: No
    Overtime: Possible
    Duration: Temp
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STS AEROSTAFF SERVICES
    Attention: STS AeroStaff Services
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 800/800-2400
    Website: www.stsaviationgroup.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Hydraulic Design/Electro-Mechanical Systems Engineer

    Description:
    Hydraulic Design/Electro-Mechanical Systems Engineer

    Location: Savannah, GA
    Rate: $60.00 - $63.00/HR
    Long Term contract


    Unique Skills:
    - Basic understanding of Hydraulics as it applies to aircraft is required.
    - Use of CATIA or similar 3D CAD system is required.
    - Experience with Hydraulic Design preferred.
    - Experience with CATIA tubing work bench is preferred.
    - Experience with designing for compliance to FAR 25.1435 is preferred.


    Education and Experience Requirements:
    Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in the specific technical discipline or 15 yrs broad engineering experience in several technical disciplines with Bachelors, or 8 yrs in the specific technical discipline with Masters, or 6 yrs in the specific technical discipline with PhD.


    Position Purpose:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

    Principal Duties and Responsibilities:
    Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 2. Performs other duties as assigned

    Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 6524
    Job Location: Savannah, GA
    Rate: $60-$63
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Cathy O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Hydraulic Design, Electro-Mechanical Systems Engineer/TSII

    Description:
    UNIQUE SKILLS
    Basic understanding of Hydraulics as it applies to aircraft is required. Use of CATIA or similar 3D CAD system is required. Experience with Hydraulic Design preferred. Experience with CATIA tubing work bench is preferred. Experience with designing for compliance to FAR 25.1435 is preferred.

    EDUCATION AND EXPERIENCE REQUIREMENTS
    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs. in the specific technical discipline or 15 yrs. broad engineering experience in several technical disciplines with Bachelors, or 8 yrs. in the specific technical discipline with Masters, or 6 yrs. in the specific technical discipline with PhD.

    POSITION PURPOSE
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

    PRINCIPAL DUTIES AND RESPONSIBILITIES
    ESSENTIAL FUNCTIONS
    1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
    2. Is consulted extensively by associates and others as a recognized authority within the field
    3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
    4. Approach to problem solving balances technical product, cost and schedule
    5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
    6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    ADDITIONAL FUNCTIONS
    1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
    2. Performs other duties as assigned

    OTHER REQUIREMENTS
    1. Advanced degree in engineering, or related curriculum preferred
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 16-629-78841
    Job Location: Southeast
    Rate: $60.00 to $63.00/per hr.
    Per Diem: Split
    Overtime: Possible
    Duration: 6 mths +
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    IT Services Engineers - Bridgewater, VA

    Description:
    STS AeroStaff Services is currently hiring IT Services Engineers for open positions in Bridgewater, Virginia.

    Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

    Job Description:

    The IT Services Engineer provides reliable IT infrastructure to the organization and helps secure the company’s IT assets.

    Duties:

    • Configure, maintain and troubleshoot critical data processing infrastructure at corporate headquarters and branch offices: including Server Operating Systems, Storage Area Network (SAN) and Server Hardware.
    • Configure and upgrade virtual environment.
    • Maintain corporate Email servers.
    • Manage system back-ups and ensure proper disaster preparation.
    • Maintain directory services.
    • Monitor and analyze device configurations to optimize performance and increase security.
    • Maintain and configure virtual applications.
    • Manage system security, patching and upgrades.
    • Maintain up to date infrastructure diagrams and documentation.
    • Protects organization's value by keeping information confidential.
    • Achieves organization goals by accepting ownership for accomplishing new and different requests; exploring opportunities to add value to job accomplishments.
    • Other duties as assigned.

    Qualifications:

    • High School Diploma is required; Associate’s or Bachelor’s Degree in Information Systems or a related field of study is preferred.
    • 5+ years in IT Infrastructure design and troubleshooting.
    • Certificates such as MCSE, VCP is preferred.
    • Demonstrate a high level of knowledge of Microsoft products, and VMware vSphere.
    • Demonstrate ability to administer a 500+ node network.
    • Demonstrate working knowledge of current server operating systems best practices.
    • Ability to work nights and weekends to support the IT Infrastructure.
    • Demonstrate knowledge of network equipment, and protocols.
    • Expert analytical and troubleshooting skills and ability to trace issues to root cause.
    • Strong analytical, organizational, problem-solving and time-management skills.
    • Strong communication (verbal and written) and listening skills.
    • Strong teamwork, planning and coordination skills.
    • Self-motivated, adaptable and the ability to meet aggressive deadlines.
    • Ability to work effectively with minimal direction.
    • Possess or is able to obtain US Passport and can travel domestically as well as internationally.
    • Ability to obtain and maintain a DOD Secret Clearance.

    STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

    We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

    Thanks for taking the time, and we look forward to hearing from you soon.
     
    Job Number: 37204
    Job Location: Bridgewater, VA
    Rate: DOE
    Per Diem: No
    Overtime: Possible
    Duration: Temp
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STS AEROSTAFF SERVICES
    Attention: STS AeroStaff Services
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 800/800-2400
    Website: www.stsaviationgroup.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    ITC Analyst - RM

    Description:
    Johnson Service Group is looking for an ITC Professional for our client.

    This is a 1.6 year contract located in Stratford, CT.

    Job Description

    The primary responsibility of this role will be to perform Jurisdiction and Classification (J&C) in client�s PLM systems in accordance with the ITAR and/or EAR of Hardware, Tech Data, Software and Defense Services. Interact Daily with Engineering, Operations, Purchasing and SAS to address J&C items.

    Mandatory Skills
    � Employee must have technical/engineering experience (Avionics, Electrical, Propulsion, Chemical Airframe, Publications, Training)
    � Employee must have export compliance (ITAR\EAR) experience
    � Employee must be adept in navigating through the MS Office Suite and must be able to handle a high volume of requests efficiently to meet internal customer demands.

    Nice to Have Skills
    � Knowledge of client's MATRIX-ONE, ERC Engineering Drawings and Specifications
    � Knowledge of typical business processes (i.e. procurement, proposal preparation, program management, etc.) and production support would be helpful
     
    Job Number: 352699
    Job Location: Stratford, CT
    Rate: Open
    Per Diem: yes
    Overtime: yes
    Duration: 18 months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Richard Martinsen
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    ITC Professional

    Description:
    POSITION ROLES AND RESPONSIBILITIES
    The primary responsibility of this role will be to perform Jurisdiction and Classification (J&C) in Sikorskys PLM systems in accordance with the ITAR and/or EAR of Hardware, Tech Data, Software and Defense Services. Interact Daily with Engineering, Operations, Purchasing and SAS to address J&C items. Mandatory Skills:
    Employee must have technical/engineering experience (Avionics, Electrical, Propulsion, Chemical Airframe, Publications, and Training)
    Employee must have export compliance (ITAR\EAR) experience
    Employee must be adept in navigating through the MS Office Suite and must be able to handle a high volume of requests efficiently to meet internal customer demands.
    Nice to Have Skills:
    Knowledge of Sikorsky's MATRIX-ONE, ERC Engineering Drawings and Specifications
    Knowledge of typical business processes (i.e. procurement, proposal preparation, program management, etc.) and production support would be helpful
    Skills Required:
    Employee must have technical/engineering experience
    Knowledge in the area of export compliance a plus.
    Knowledge of Sikorsky's MATRIX-ONE, Electronic Record Center (ERC), Engineering Drawings and Specifications would be beneficial.
    Employee must be adept in navigating through the MS Office Suite and must be able to handle a high volume of requests efficiently to meet internal customer demands.
    Knowledge of typical business processes (i.e. procurement, proposal preparation, program management, etc.) and production support would be helpful.

    EDUCATION
    Bachelor of Science
     
    Job Number: 16-513-27891
    Job Location: Northeast
    Rate: Open
    Per Diem: Split
    Overtime: Possible
    Duration: 6 mths +
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Industrial Engineer III

    Description:
    OCCUPATIONAL SUMMARY
    Provide support to leads and operators in the assembly and/or fabrication areas. Provide information and support for process improvement. Plan, structure and implement manufacturing programs.
    Support manufacturing assembly and fabrication to trouble shoot both assembly and fabrication problems. This requires close interaction with assembly personnel, fabrication personnel, and their supervision. Must support all lean manufacturing improvements and may require participation in lean improvement activities. Must also work closely with Quality Assurance, Program Management, Engineering, and shop Managers to resolve quality issues, increase productivity, and eliminate ergonomic problems.

    AN INDUSTRIAL ENGINEER III MUST EXHIBIT THE FOLLOWING CHARACTERISTICS
    A documented history of supporting manufacturing fabrication and assembly departments in identifying and resolving production problems and issues.
    Demonstrates the ability to facilitate continuous improvement in the production process.
    Must be experienced in interacting closely with personnel at all levels of the manufacturing system, including supervision and management.
    Must be able to assume a leadership position in regard to Lean Manufacturing improvement projects, and exhibit a record of actively supporting past projects.
    Must be capable of interacting regularly and cooperatively with Quality Assurance, Program Management, Engineering, and Production Management to resolve quality, productivity, ergonomic and safety issues.
    Must be capable of initiating improvement projects resulting in labor, material, space, manpower, and/or other measurable cost reductions.
    Must have a working knowledge of current 6S factory practices
    Should be familiar with company policies regarding worker safety and have demonstrated the ability to identify and resolve safety issues in the workplace.
    Knowledgeable of Life Safety Code as it applies to manufacturing layouts.
    Must have demonstrated above average capability for developing engineering analysis.
    Must have knowledge of basic material handling principles and products
    Must be capable of developing special projects that are reviewed at the Zodiac level.
    Uses statistics as a normal tool for resolving issues.
    Leads or assists process improvement teams.

    DUTIES AND RESPONSIBILITIES
    Provide support to leads and operators in the assembly and fabrication areas.
    Analyze parts and seat flow.
    Conducts labor and machine time studies, operator work and motion studies, material and work flow studies in order to suggest and implement more economical and efficient manufacturing practices. Uses gathered data to establish and publish Standard Labor and Machine Data, and to calculate manpower and machine requirements.
    Balance the lines or cells and implement procedures and/or operator instructions to support process improvement.
    Participate to the implementation of structure and plan manufacturing programs (Lean Manufacturing, Set-up Reduction, 6S, Cost Reduction).
    Apply statistical data analysis in normal duty activities.
    Measures, analyzes, and adjusts Factory Floor Layout to achieve optimum manufacturing productivity as directed by Lean Manufacturing practices, subject to managerial approval.
    Design of major layouts with product flow, material handling considerations, and infrastructure provisions.
    Creates and documents Standard Work Instructions for use by factory personnel, in compliance with design and quality specifications and FAA directives
    Participates in training shop personnel in new and/or updated processes, including Lean Manufacturing practices and improvement implementations.
    Introduces new production processes and equipment.
    Participate on concurrent engineering teams and verify adequacy/optimization of design in regard to weight and cost restrictions.
    Collaborates with engineering design personnel to influence product design and thus provides for good production methods and economical tooling.
    Analyzes engineering design documents, prototypes and/or engineering change orders and determines if an assembly or fabricated part can be manufactured. Communicates back to engineering and/or R&D to discuss needed changes.
    Reviews and approves new and revised engineering drawings through the drawing release system.
    Reviews changes in engineering design, planning, tooling, and NC programming to determine impact on current processes, methods and work instructions. Follows through with updating standard data and standard work instructions per such changes.
    Investigates serious or recurrent production difficulties and delays due to such factors as faulty methods, tooling, operational sequences, or inadequate facilities or layouts.
    Frequently contacts supervisory and non-supervisory personnel in engineering, production planning, tool design and other departments for the purpose of discussing production problems in order to secure necessary information or consider factors which may interfere with the effectiveness of production. Takes preventive or corrective action to remedy the problem or refer it to others who may be more directly responsible.
    Develops new ideas and methods, and recommends changes in existing tooling to secure the most economical production. Submits cost reduction ideas.
    Continuously analyzes current processes, tooling and methods in the factory for labor and/or cost reduction opportunities. Documents such opportunities and submits suggestions for managerial approval. Implements all approved suggestions. Investigates new manufacturing processes and plans implementation, including acquisition of new equipment and/or facilities.
    Completes all assignments aimed at determining optimal methods and processes for manufacturing designated company products.
    Establishes and maintains interaction with outside vendors with a view to improvement opportunities relating to equipment and processes. Makes investigative visits to such vendors when required.
    Cooperates with Safety and Health personnel to optimize factory safety conditions, and with Energy personnel to monitor and optimize energy and fuel usage within the facility.
    Manages significant cost capital projects including identification of equipment, justification of capital, and ensures schedule and installation is per plan.
    Uses published Master Schedule and Production Requirements data to develop manufacturing capacity analyses for all of the manufacturing departments and work centers involved in meeting the Production Plan. Regular electronic reports will be presented to upper management for determining actions for solving any capacity issues.
    Prepares regular Manpower reports to relay information regarding manufacturing departments or work centers that are in need of employee and/or equipment adjustments.
    Prepares Manpower/Capacity/Forecast reports for aircraft manufacturers (i.e. Boeing, Airbus, etc.) to relay the companys production capability to manage future commitments.
    Maintains a current electronic listing of all active manufacturing work centers.
    Makes regular oral and written reports and/or presentations to supervisory and managerial personnel on any of the above activities.

    QUALIFICATION REQUIREMENTS
    KNOWLEDGE AND SKILLS
    Requires sufficient training to permit ready comprehension of problems having to do with production methods and facilities.
    Must be capable of preparing well-written and orderly reports.
    Must have sufficient knowledge of manufacturing and related operations with detailed knowledge of such fields as product design, engineering function, tool design, tool fabrication, space layout, handling equipment, production machinery and equipment, NC machinery and equipment, factory methods work, etc.
    Must have knowledge of trigonometry, algebra and statistics.
    Must be proficient in inventory management, product data management, monitoring production control and cost, and in manufacturing resource planning.
    Strong knowledge of motion and time study principles
    Knowledge and experience in Lean Manufacturing.
    Strong PC skills, knowledge of all Microsoft software
    Able to lead teams of people towards focused and defined objectives
    Strong Working knowledge of AutoCad
    Strong knowledge of motion and time study principles

    EDUCATION AND/OR EXPERIENCE
    MUST HAVE ONE OF THE FOLLOWING
    Must have a B.S degree in a related technical field (e.g.: IE, ME, EE) or an Associate degree with 3 years related experience or 6 years of job related experience.
    Additionally 12 years of manufacturing/industrial engineering experience.
    State registered professional engineers license in BSME, BSMfgE, BSEE, or BSIE and twelve (12) years of manufacturing experience.

    COMMUNICATION SKILLS
    Strong leadership and communication skills. Ability to communicate with all levels of management, peers, operators and customers. Must have the ability to generate written communication and to operate required office equipment. Must be able to read and review written communication. Speech and hearing abilities that allow individual to communicate clearly and distinctly in English.
    Must be capable of communicating electronically via email. Must have working knowledge of Excel, Word, PowerPoint and other applicable computer softwares.

    REASONING ABILITY
    Ability to think strategically and resolve problems. Must be able to make decisions. Must be able to interface with other departments and vendors.

    PHYSICAL DEMANDS
    This position requires extended periods of sitting while working with computers and viewing computer monitors, and other office equipment. Finger dexterity needed in using misc. office equipment such as telephone, typing, ten key, fax, copy machine etc. Bending, stooping, reaching and lifting up to approximately twenty pounds are required during tasks related to the job.

    Listed above are the ESSENTIAL FUNCTIONS of this job classification. Employees in this job classification may be required to perform various other duties including but not limited to training, administration, and housekeeping. In addition, employees in this job classification are responsible for the quality, quantity and timeliness of the product or service they provide. They will carry out those duties, in a safe and cooperative manner, per established policies, practices and procedures. Management reserves the right to add, modify, change or rescind the work assignments of different positions and to make reasonable accommodations so that qualified employees can perform the essential functions of the job.
     
    Job Number: 16-611-7927
    Job Location: South-central
    Rate: $70K to $90K
    Per Diem: No
    Overtime: Possible
    Duration: DIRECT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Inspector - Level 1 - Active Secret Clearance

    Description:
    ACTIVE CLEARANCE ONLY!!!!!
    This is a 1st shift position. Work shift is Monday to Friday 8 hours per day. Primary inspection of kits and shipments. Secondary role will be mechanical part inspection. Uses predetermined methods, operations, setups and prescribed specifications to inspect visually in-process and completed products such as electronic units and subsystems, precision electromechanical assemblies or mechanical units, subassemblies, structural flaws, internal defects, and missing welds. Uses various measuring devices. Accepts, rejects, or reworks defective or malfunctioning units or systems. Works from blueprints, diagrams, dial indicators, preset micrometers, scales, fixtures, customer specifications, drawing or inspection instructions and checklists. May monitor and verify quality in accordance with statistical process or other control procedures.


    Mandatory Skills:
    Clearance Required. Mechanical inspection experience of complex machined parts, sheet metal parts, paint and stencil marking.


    Desired Skills:
    SOFCLS contract experience Strong and proven communication skills – written and verbal Proficient in Microsoft Office (e.g. Word, Excel, PowerPoint)

    Skill Matrix
    Mechanical inspection 4-5 years
    Kit and shipping inspection 4-5 years
     
    Job Location: Lexington, KY
    Rate: 23-26/hr
    Duration: 6 months
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jung Bahk
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Instrumentation Lab Technician

    Description:
    JSG is looking for an Instrumentation Lab Technician - First Shift Needed in Stratford, CT for a 12+ month contract opportunity!

    Job Duties:
    Work from Engineering Requests, Procedures and Drawings with limited guidance; to Fabricate, Install, Check-out, Diagnose, and Trouble-Shoot Instrumentation Data Acquisition Systems and Sensors in support of Ground and Flight Test Programs.
    Must be able to accomplish the planning, build up and termination of cable harnesses associated with Instrumentation Systems.
    Must be able to assist in performing system calibrations and check outs with the Test Engineer.

    Must be able to support Sensor Calibrations Experienced Instrumentation Technician in both Rotary Wing Structural Ground and Flight Test.

    Should possess a strong Mechanical and Electrical background familiar with Strain Gages and their circuitry, thermocouples, linear displacement and vibration transducers, measurement systems, instrumentation wiring and documentation
     
    Job Number: 353388
    Job Location: Stratford, CT.
    Rate: open
    Per Diem: Yes if qualified
    Overtime: Possible
    Duration: 12 Month +
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Linda Peck
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Instrumentation Technician

    Description:
    Overview:
    The Instrumentation Technician will provide technical expertise is the areas of instrumentation and data acquisition hardware in support of our launch vehicles and spacecraft.Responsibilities:

    • Performs complex technical assignments involving instrumentation and data acquisition/processing systems
    • Maintain, calibrate, configure, monitor, test, troubleshoot, install, and repair instrumentation, process controls, data acquisition systems, and electrical systems
    • Investigate, diagnose, correct, and document instrumentation or system malfunctions
    • Analyze results of calibrations and processed data and assist in the interpretation of test data
    • Fabricate and install parts and systems to be tested in test equipment, using hand tools, power tools, and test instruments• Adjust, repair, or replace faulty components of test setups and equipment
    • Complete necessary instrumentation of test stands, wiring, and data acquisition systems
    • Lay out, build, test, troubleshoot, repair, and modify developmental and production electrical and electronic units, assemblies, components, parts, equipment, and systems
    • Configure the data acquisition hardware• Connect and verify pressure transducers, thermocouples, and other sensors
    • Install connectors, connector pins, terminals, and lugs
    • Perform continuity checks, locate and correct wiring errors using measuring instruments such as ohmmeters and sequential continuity checkers
    • Adjusts, calibrates, aligns, and modifies circuitry and components and records effects on unit performance
    • Read and interpret planning documents, schematics, wiring diagrams, specifications, drawings, manuals, blueprints, and engineering sketches
    • Perform lay out and wiring of electrical panels• Collaborate with design engineers to troubleshoot failures and issues derived from test data
    • Perform other related duties, as assigned, for the purpose of ensuring an efficient and effective work environmentBasic

    Qualifications:
    • High School Diploma or GED
    • A minimum of 3 years of experience working with any of the following instrumentation: Resistance Temperature Devices (RTDs), thermocouples, strain gages, load cells, displacement transducers, pressure transducersPreferred Skills and Experience:
    • Basic knowledge of Wheatstone bridge theory, ability to apply ohms law, and an understanding of DC electronics
    • Associate’s Degree in Instrumentation, Control Technology, Electrical Systems, or other related field
    • Operational knowledge of an oscilloscope & multi-meter, soldering wires & connectors, operation of various crimping tools, wire stripping, ohm’s law, continuity testing, pinning out a military type connector, routing & tie wrapping cables, drilling & tapping holes, and building junction boxes
    • System level trouble-shooting skills and the ability to logically solve instrumentation system problems and determine corrective action
    • Knowledge in signal conditioning concepts for various types of sensors, to include the following: Thermocouple Types K,S, and E; TC bonding concepts: resistance weld on and adhesive bond on types; TC probes through thermowell sheaths; Cold Junction compensation concepts
    • Background should include experience with the following devices: DC power supplies; DC-DC convertors; UPS installations; Heat shrink tubing, cable harnessing, lacing, and proper strain relief concepts
    • Working knowledge of transducers, operational amplifiers, and the knowledge of measurement techniques for temperature, pressure, flow, displacement, vibration and the application strain gages are also highly desired. Identify required data, data acquisition plans and test parameters, setting up equipment to conform to these specifications
    • Working knowledge multiple bus architectures (PCI/PCIe, PXI/PXIe, GPIB, Serial, USB, etc.) and data communication technologies• Demonstrated capabilities in the development of comprehensive project plans that include all tasks; stage/gate milestones, and reviews necessary to successfully develop and implement solutions
    • Intermediate skill level using Windows Operating Systems
    • Intermediate skill level using Microsoft Office (Excel, PowerPoint, Word, Outlook, OneNote)
    • Knowledge in Data Acquisition concepts, hardware, and interfacing (SCXI and PXI based)

    Additional Requirements:
    • General physical fitness is required for some work areas, flight hardware typically is built in tight quarters and physical dexterity is required, also the ability to lift heavy objects is required in this position ?50lbs
    • Ability to perform job duties that require standing, kneeling, crouching, twisting upper body, working in cramped positions in small openings and climbing hand over hand.
    • Ability to work at elevated heights
    • Typically exposed to work in extreme outdoor environments – heat, cold, rain
    • Work performed in an environment requiring exposure to fumes, odors, and noise• Must be available for overtime and weekends
    • Valid Driver’s License, and a clean driving record
     
    Job Location: Vandeburg, CA
    Per Diem: Possible
    Duration: 3-4 months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Sidney Williams
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Integration and Test Engineer - Level 2

    Description:
    Integration and Test Engineer - Level 2

    Location: Orlando, FL
    Pay Rate: $45/hr (DOE)
    Duration: 1 Year Contract
    Shift: First, 9/80
    Secret Clearance: (Prime Contract: Can start w/o clearance: Yes; Interim Clearance Sufficient: Yes)

    *Must be a U.S. citizen*

    Job Description:
    -Designs, develops, and implements integration and testing methods and equipment.
    -Plans and arranges the labor, schedules, and equipment required for testing and evaluating standard and special devices.
    -Provides test area with parameters for sample testing and specifies tests to be performed.
    -Compiles data and defines changes required in testing equipment, testing procedures, manufacturing processes, or new testing requirements.
    -Responsible for testing all customer samples and for special tests that cannot be performed in the test area.


    Mandatory Skills:
    -A multifaceted Systems Test Engineer to provide support for the Javelin Spiral 3 seeker Design Verification Testing and qualification.
    -This position will require the candidate to:
    1) assess system requirements for the purpose of designing and drafting test plans and procedures;
    2) manage acquisition and preparation of test articles;
    3) coordinate and manage execution of the development and test activities;
    4) gather and analyze environmental and EO test data for the purpose of quantifying performance against requirements.
    -REQUIRES A LOT OF EXPERIENCE WITH ELECTRO-OPTICS REQUIREMENTS INTERPRETATION, INTEGRATION & TEST OPERATIONS MANDATORY.
    -Systems Engineer - Requires a Bachelor's degree, or higher, in Electrical Engineering, Physics, or Mathematics with a keen interest in weapon system development.
    -Proficiency in programming languages such as C and C++ is desired.
    -Strong background in mathematics and proficiency in MATLAB or a related simulation tool is essential.
    -Course work or related experience in integration and testing of hardware and or software components highly beneficial.


    Desired Skills:
    -System Requirements
    -Electro-Optics: requirements interpretation, integration, & test operations is preferred
     
    Job Number: 6874
    Job Location: Orlando, FL
    Rate: 45.00
    Per Diem: Possible
    Overtime: No
    Duration: 1 year
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Landing Gear/Brake Systems Engineers

    Description:
    Seeking landing gear systems engineers. Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEMs.
    We are seeking Landing Gear Systems Engineers to work with our client on a new commercial aircraft flight test certification program.
    Essential functions:
    Landing Gear System requirements verification and validation (ARP4754).
    Prepare and review test specifications, procedures and test reports.
    Support flight test and ground test activities.
    Analyze test data and evaluate system operation.
    Provide engineering input to technical reviews
    Identify and communicate technical risks for the landing gear system
    Support overall certification effort for the landing gear system

    Desired Qualifications:

    Landing Gear/Brakes anti-skid, brake tuning, brake performance, steering, mechanical and electrical aspects of braking, landing gear system (mechanichal and electric)
    Aircraft flight test certification program experience.
    Experience with Hydo-Mechanical systems (valves, actuators, uplocks etc.)
    Knowledge of materials, mechanical systems, and failure mechanisms
    Knowledge of Part 25 Airworthiness Regulations and Means of Compliance
    Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
    A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
    Ability to represent the client professionally and positively during client interactions and meetings.
    Bachelor degree in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.

    Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEMs. They have a growing team of aerospace engineers, technicians, mechanics, and specialist consultants that support multiple programs in the aerospace industry.
     
    Job Number: LA
    Job Location: Seattle, WA
    Per Diem: possible
    Overtime: possible
    Duration: LT
    Start Date: asap
    Input Date: 11/14/2020
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Lynn Launer
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Landing Gear/Brake Systems Engineers

    Description:
    Seeking landing gear systems engineers. Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s.
    We are seeking Landing Gear Systems Engineers to work with our client on a new commercial aircraft flight test certification program.
    Essential functions:
    � Landing Gear System requirements verification and validation (ARP4754).
    � Prepare and review test specifications, procedures and test reports.
    � Support flight test and ground test activities.
    � Analyze test data and evaluate system operation.
    � Provide engineering input to technical reviews
    � Identify and communicate technical risks for the landing gear system
    � Support overall certification effort for the landing gear system

    Desired Qualifications:

    � Landing Gear/Brakes � anti-skid, brake tuning, brake performance, steering, mechanical and electrical aspects of braking, landing gear system (mechanichal and electric)
    � Aircraft flight test certification program experience.
    � Experience with Hydo-Mechanical systems (valves, actuators, uplocks etc.)
    � Knowledge of materials, mechanical systems, and failure mechanisms
    � Knowledge of Part 25 Airworthiness Regulations and Means of Compliance
    � Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
    � A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
    � Ability to represent the client professionally and positively during client interactions and meetings.
    � Bachelor degree in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.

    Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They have a growing team of aerospace engineers, technicians, mechanics, and specialist consultants that support multiple programs in the aerospace industry.
     
    Job Number: Seattle
    Job Location: Seattle, WA
    Rate: open
    Per Diem: yes
    Overtime: no
    Start Date: asap
    Input Date: 11/14/2020
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Dawn Bergau
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Landing Gear/Brake Systems Engineers

    Description:
    Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They have a growing team of aerospace engineers, technicians, mechanics, and specialist consultants that support multiple programs in the aerospace industry.
    Seeking landing gear systems engineers. Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s.
    We are seeking Landing Gear Systems Engineers to work with our client on a new commercial aircraft flight test certification program.
    Essential functions:
    � Landing Gear System requirements verification and validation (ARP4754).
    � Prepare and review test specifications, procedures and test reports.
    � Support flight test and ground test activities.
    � Analyze test data and evaluate system operation.
    � Provide engineering input to technical reviews
    � Identify and communicate technical risks for the landing gear system
    � Support overall certification effort for the landing gear system

    Desired Qualifications:

    � Landing Gear/Brakes � anti-skid, brake tuning, brake performance, steering, mechanical and electrical aspects of braking, landing gear system (mechanichal and electric)
    � Aircraft flight test certification program experience.
    � Experience with Hydo-Mechanical systems (valves, actuators, uplocks etc.)
    � Knowledge of materials, mechanical systems, and failure mechanisms
    � Knowledge of Part 25 Airworthiness Regulations and Means of Compliance
    � Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
    � A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
    � Ability to represent the client professionally and positively during client interactions and meetings.
    � Bachelor degree in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.

    If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

    Candidates must have legal authorization to work in the United States, Canada or Mexico
     
    Job Number: Land/Sea
    Job Location: seattle, wa
    Per Diem: possible
    Overtime: Yes
    Duration: LT
    Start Date: asap
    Input Date: 11/14/2020
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Dawn Bergau
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Liaison MRB / Product Review Engineer III (OH)

    Description:
    Applies knowledge of Boeing design principles to assess and resolve product/process issues through the product lifecycle. Analyzes, conducts root cause analysis and develops dispositions for design non-conformances. Applies engineering principles to research technical, operational and quality issues that cannot be resolved by customer and designs interim and final engineering solutions. Identifies documents, analyzes reported problems and communicates deviations that could impact design intent and safety; recommends and manages resolution. Develops and implements product/process improvements. Supports Integrated Product Teams (IPT) and participates in design reviews. Ability to represent the engineering community in the build through post production environment. Ensures supplier and build partner compliance with Boeing & Air Force standards. Develops customer correspondence for continued safe operation and maintenance of equipment. Participates in on-site disabled product repair teams and accident investigation or support team. Ability to analyze damage repair or structural modification to determine appropriate jacking and shoring, prevent collateral damage and assure a safe work environment. Ability to design interim structural repairs and conducts static strength analysis. Develops non-destructive test procedures, tools and standards. Conducts simple static strength analysis.

    MORE SPECIFIC ASSIGNMENT DUTIES…
    Component Level Electrical Repair (Not Structural Repairs). Support Modification and Repair of automated test equipment.

    Must be able to obtain Secret Clearance shortly after start date--all candidates are welcome to apply with or without prior Clearance. Suppliers do start by stating in candidate's comments & resume the current Clearance status.

    Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.
     
    Job Number: MRBoh
    Job Location: Heath, OH
    Rate: OPEN
    Per Diem: YES
    Overtime: Possible
    Duration: 12+ Months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INNOVA SOLUTIONS, INC
    Attention: Janice Plattner
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.innovasolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Maintenance Controllers - Addison, TX

    Description:
    STS AeroStaff Services is currently hiring Maintenance Controllers for open positions in Addison, Texas.

    Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

    Job Purpose:

    Perform accounting support duties including processing of vouchers, reconciling accounting transactions, and maintaining files. Applies accepted procedures to the preparation and maintenance of financial and business transaction data, and prepares reports to ensure accurate accounting records.

    Job Duties:

    • The Maintenance Control team provides surveillance, control, and direction for all aircraft maintenance 24 hrs a day, 7 days a week as well as effects aircraft repair.
    • Monitor the daily operation relative to plan, coordinating related maintenance activities and providing assistance in preventing or minimizing schedule interruptions due to maintenance requirements.
    • Coordinate with Flight Following, Flight Crew, Mechanics, Planning and Stores, the requirements to maintain flight schedule in accordance with procedures in the GMM
    • Develop total nightly workload packages and balance workload with regard to required and available resources.
    • Initiate MEL tracking numbers track MEL to keep within limits and log information.
    • Keep maintenance stations informed of MEL item coming through their respective stations.
    • Perform scheduled maintenance to keep aircraft in peak operating condition.
    • Initiate repairs/replacement to acceptable or approved technical data and instructions.
    • Tests, inspects and checks all repairs/installations to ensure proper operation. Conducts repairs in a time-efficient manner.
    • Provide technical assistance to contract agency maintenance personnel to assist with the maintenance operation.
    • Plan and schedule lower level maintenance checks and non-routine maintenance work.
    • Initiate, prepare and inform QC of MEL escalation.
    • Prepare reports concerning pertinent aspects of aircraft maintenance operation and for identification of issues requiring special attention.

    Qualifications:

    • Certificated A&P mechanic.
    • 3+ years’ experience in heavy line maintenance of transport category aircraft, preferablyDC-9/MD-80/737 series.
    • Familiarity with FAA 121/145 regulations.

    STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

    We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

    Thanks for taking the time, and we look forward to hearing from you soon.
     
    Job Number: 35101
    Job Location: Addison, TX
    Rate: DOE
    Per Diem: Possible
    Overtime: Possible
    Duration: Temp
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STS AEROSTAFF SERVICES
    Attention: STS AeroStaff Services
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 800/800-2400
    Website: www.stsaviationgroup.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Manufacturing Engineer - Level 3

    Description:
    Manufacturing Engineer - Level 3

    Location: Clearwater/Pinellas Park/Oldsmar, FL
    Duration: 1 Year Contract
    Pay Rate: $35/hr - $45/hr (DOE)
    Shift: 2nd, 9/80 ; Overtime: Yes
    *Must be a U.S. citizen* *No clearance needed*

    Job Description:
    -Provide manufacturing engineering support to the build of circuit card assemblies as a contributing member of an integrated product team (IPT).
    -Provide day-to-day support to manufacturing operations to ensure quality, cost and schedule goals are met; Investigate, communicate, and solve design, producibility, and process related assembly issues as required.
    -Define optimal material and product flow within the production work cell, taking into consideration the unique requirements of each customer.
    -Generate and maintain detailed assembly work instructions including narrative, diagrams, photographs, attachments, and linked documents.
    -Support the design change management activities of the IPT.
    - Analyze process defect data and trends and help define and implement corrective actions.
    -Perform and communicate non-recurring engineering activities during production start-up, which includes tooling and fixture design, development of machine automation programs, and configuration of the manufacturing bill of materials for manufacturability.
    -Interface with technical counterparts in other organizations both within and outside Clearwater Operations.

    Mandatory Skills:
    • IPC-A-610 training or J-STD-001 (MANDATORY)
    • Minimum 5 years manufacturing engineering experience in a technical role supporting the design and manufacturing of circuit card assemblies within an Integrated Product Team type of work environment.
    • Skill with surface mount technology and automated SMT build equipment.
    • Strong interpersonal skills and demonstrated ability to work with coworkers and others from diverse backgrounds.
    • Proven ability to effectively communicate through written and oral means, and to multitask by handling multiple assignments in parallel.
    • Willingness to work overtime and during off-days occasionally as required to support production operations.

    Desired Skills:
    • Bachelor’s degree from an accredited University in Engineering.
    • Experience or training with advanced manufacturing technology and automated equipment applications, particularly as it relates to circuit card assembly manufacturing; understanding of lean manufacturing principles and the use of statistical tools to solve problems.
    • Strong technical understanding of circuit card assembly producibility and process flow.
    • Specific experience with SAP and Solumina manufacturing execution system. Mechanical and electrical aptitude, and the ability to quickly learn new software applications.
    • Experienced user of MS S/W applications including MS Word, Project, Excel, Visio, and Power Point.
    • MYDATA SMT pick & place machine equipment
    • Ability to read and interpret Engineering Drawings, and to use viewing and editing tools such as AutoCAD or Corelis.
     
    Job Number: 6946
    Job Location: Clearwater, FL
    Rate: 35.00-45.00
    Per Diem: Possible
    Overtime: Yes
    Duration: 1 year
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Manufacturing Engineer - Secret Clearance

    Description:
    **Active Secret Clearance**
    Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling. Designs arrangement of machines within plant facilities to ensure most efficient and productive layout. Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance. Adapts machine or equipment design to factory and production conditions. May incorporate inspection and test requirements into the production plan. Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality. Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques. Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensures processes and procedures are in compliance with regulations.

    Skill/Experience/Education
    Mandatory:

    Working experience with SAP, engineering documents, specifications and policies. Must have experience working in a manufacturing environment and have a strong understanding of engineering principles including mechanical, industrial, or operations.

    Desired:
    Thorough knowledge of Electrical/wiring manufacturing and associated processes. Tooling, fabrication and assembly manufacturing processes and procedures is a plus. Demonstrated ability to utilize knowledge/experience in the preparation of all document types within the group.

    Skill Matrix
    CATIA 4-5 Years
     
    Job Number: JB - 0329
    Job Location: Palmdale, CA
    Duration: 10-12 months
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jung Bahk
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Manufacturing Engineer II

    Description:
    Manufacturing Engineer II

    Location: Savannah, GA
    Rate: $50.00/HR
    Long Term contract


    Unique Skills:
    SAP, Solumina, Electrical systems knowledge

    Education and Experience Requirements:
    Bachelors degree in Mechanical, Manufacturing Engineering or related curriculum, or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Three (3) years Manufacturing Engineering, planning, or related technical experience.

    Position Purpose:
    Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning).

    Principal Duties and Responsibilities:
    Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 9. Utilize CADAM/CATIA data and nesting software to generate flat patterns, Master Models, NC data, and ply nests to meet Engineering and Manufacturing requirements. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

    Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. 3. Perform other duties as assigned.

    Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
     
    Job Number: 6940
    Job Location: Savannah, GA
    Rate: $50.00/HR
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Manufacturing Engineer with active secret CA

    Description:
    Lockheed Martin Aero 0329
    Job Title: Manufacturing Engineer
    Location: Palmdale, CA 93599
    Compensation: 45-65/hr (DOE)
    Assignment Length: 10 + month contract
    Security Clearance Secret (Prime Contract:, Can start w/o clearance: No, Interim Clearance Sufficient: No)
    Non exempt
    1st shift

    Description:

    Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling.

    Designs arrangement of machines within plant facilities to ensure most efficient and productive layout.

    Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance. Adapts machine or equipment design to factory and production conditions.

    May incorporate inspection and test requirements into the production plan.

    Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality.

    Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques.

    Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensures processes and procedures are in compliance with regulations.

    Skill/Experience/Education
    Mandatory:

    Working experience with SAP, engineering documents, specifications and policies.

    Must have experience working in a manufacturing environment and have a strong understanding of engineering principles including mechanical, industrial, or operations.

    Desired:

    Thorough knowledge of Electrical/wiring manufacturing and associated processes.

    Tooling, fabrication and assembly manufacturing processes and procedures is a plus.

    Demonstrated ability to utilize knowledge/experience in the preparation of all document types within the group.

    Skill Matrix
    Skill Name Description Level (1-5, 5 being the highest)
    1 2 3 4 5 Years Mandatory(Yes/No)
    CATIA 4-5 Years No
     
    Job Number: SW-0329
    Job Location: Palmdale, CA
    Rate: 45-65/hr DOE
    Duration: 10 months +
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Manufacturing Engineers - Melbourne, FL

    Description:
    STS AeroStaff Services is currently hiring Manufacturing Engineers for open positions in Melbourne, Florida.

    Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

    Job Description:

    The Manufacturing Engineer creates and administers the overall planning for the facility activities from components receiving to the delivery of finished aircraft including productive activities and its support processes.

    Job Duties:

    • Prepare and manage short, medium and long term production planning.
    • Ensure effective measurements and visibilities of inputs and outputs for the relevant processes to assure goals are achieved and cost objectives are met.
    • Perform continuous evaluation of critical resources to avoid bottlenecks.
    • Compile reports on the progress of work and on production problems.
    • Control work load and work capacity.
    • Plan and coordinate actions to implement product changes.
    • Coordinate actions for earlier deviations recovery and prevent impacts on company targets and obligations.

    Qualifications:

    • Must have Bachelor’s Degree in Industrial, Process, or Aeronautical Engineering.
    • A degree in management or business administration a plus.
    • APICS (Advancing Productivity, Innovation and Competitive Success) certificate a plus.
    • Must have at least 5-7 years’ experience in similar activities (planning or production planning).
    • Prior aircraft manufacturing/maintenance and repair experience preferred.
    • Prior Design experience preferred.

    Requirements:

    • Comprehension, understanding and execution of broad practices associated within the field assigned and related fields.
    • Applies these understandings in the completion of complex work assignments.
    • Experience in an aircraft production environment.
    • Project management & risk analysis experience.
    • Proficiency with planning practices and tools.
    • Strong organizational skills.
    • Strong verbal and written communication skills.
    • Utilization of Lean Production concepts.
    • Systemic vision.
    • Data analysis and consolidation.
    • Cope with deadlines and other pressured situations.
    • Interact with senior management, and staff.
    • Ability to work in a safe professional manner adhering to all regulatory requirements including, OSHA, EPA, State and Federal regulations.
    • Ability to work flexible hours and different shifts if required.
    • Employees will be subject to the random drug and alcohol testing under FAA regulations.
    • Commitment to company values and complies with department norms, policies, directives, and procedures.
    • Incorporates Lean and P3E processes and concepts into daily activities.
    • Strive for continuous improvement to processes and procedures.
    • Honors and protects confidential and proprietary documents and information.
    • Satisfies work schedule requirements.

    Benefits:

    STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

    We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

    Thanks for taking the time, and we look forward to hearing from you soon.
     
    Job Number: 37240
    Job Location: Melbourne, FL
    Rate: DOE
    Per Diem: Possible
    Overtime: Possible
    Duration: Temp
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STS AEROSTAFF SERVICES
    Attention: STS AeroStaff Services
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 800/800-2400
    Website: www.stsaviationgroup.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Manufacturing Technician II

    Description:
    Manufacturing Technician II

    Location: Burnsville, MN
    Pay Rate - $25 – 35/hr
    1 year contract
    2nd Shift Monday-Thursday 3:00pm - 1:30am

    Technical Tasks
    Perform technical tasks based on written or verbal instructions. Utilize technical assets.
    -Utilize microelectronic, electronic, optical, electro-optical, mechanical, or electromechanical equipment, including computers and lasers.
    -Perform advanced troubleshooting, calibration or modification of hardware, fixtures, and software.
    -Participate on and/or lead project teams.
    -Apply technical expertise in the evaluation, development, maintenance and use of complex products, devices, tests, or procedures under constantly changing conditions where moderate ingenuity and judgments are required.
    -Structure modifications to programs w/ Visual Basic or other SW packages/programs preferred.
    -Design simple circuits, fixtures, or mechanical parts.
    -Develop software programs to run NC machines.
    -Provide technical solutions to engineering.
    -Participate on safety initiatives.

    Manufacturing Activities
    Support manufacturing activities through the resolution of production problems, fabrication of complex hardware, equipment and training.
    -Self-manage work flow throughout area with minimal guidance, to achieve team goals.
    -Estimate labor, material, and manufacturing costs for the building and repair of product or process enhancement.
    -Identify and correct minor process, material, design, or equipment problems
    -Actively participate in material review activities including troubleshooting of non-conformances.
    -Perform mid-level (moderately complex) testing or mechanical operations on production/repair hardware including troubleshooting to component level.
    -Provide skill specific training to improve technique and/or understanding of theory of operation.
    -Fabricate complex equipment, hardware or prototypes.

    Documentation
    Provide accurate recording of time changes, test data. Parts usage, etc. This requires data interpretation.
    -Generate reports from test results and communicate results or take immediate corrective action to assure proper disposition of items in question.
    -Write test procedures and manufacturing work instruction for complex or detailed assembly or test operations.
    -Utilize multiple databases to create/use necessary information to provide information for decision making requiring judgment.

    Minimum Education Requirement:
    Associate’s/Technical Degree
     
    Job Number: 6853
    Job Location: Burnsville, MN
    Rate: $25.00 - $35.00/HR
    Per Diem: No
    Overtime: Possible
    Duration: 1 yr
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Design Engineer - Level 2

    Description:
    Mechanical Design Engineer - Level 2

    Location: Dallas, TX
    Rate: $50.00 - $60.00/HR
    6 month contract
    1st Shift

    **Must have a current ACTIVE secret clearance**

    Description
    - Mechanical Design Engineer to support the Tactical Missiles Advanced Programs (TMAP) area design effort.
    - Tasks will include conceptual and detail design of missile components, systems, and subsystems, and creation of 3D solid models and 2D drawings.
    - Effort will require coordination of design(s) with other mechanical / electrical disciplines, familiarity with Solid Rocket Motors (SRMs), SRM suppliers, booster separation systems, and tolerance analysis.
    - Must have Active Secret Clearance at time of submittal, preferably within the last 5 years. Please provide status of clearance on resume.


    Skill/Experience/Education
    Mandatory:
    - Candidate should have a Bachelors of Science degree in Mechanical Engineering, or 10 years of equivalent experience, and 6-8 years of Computer Aided Design software experience using PRO Engineer / CREO 3.
    - Candidate must be capable of creating and interpreting detail, assembly, and installation type drawings, knowledge of Geometric Dimensioning and Tolerancing, and experience with manufacturing engineering and fabrication processes.
    - Familiarity with Microsoft Office applications is desired.
     
    Job Number: 6908
    Job Location: Grand Prairie, TX
    Rate: $50.00 - $60.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 6 mos
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Design Engineer / UG/NX CA

    Description:
    Job Title: Mechanical Design Engineer
    Job Number: 157711/4393
    Location: Torrance, CA
    Compensation: 50/hr
    Assignment Length: 6 month contract


    Description:

    Mechanical Design Engineer
    This position is responsible for development of complex electrohydraulic, electromechanical, mechanical, hydro-mechanical and electro-pneumatic components and systems that will become the new products of Moog, Inc. The incumbent, a fully trained professional, plans and conducts efforts requiring judgment in the independent evaluation, selection, and substantial adaptation and modification of standard engineering techniques, procedures, and criteria. Typically, the Design Engineer devises new approaches for the problems encountered.
    Essential job functions: • Perform conceptual design, analysis, assembly/detail drawing creation in NX, and test planning for complex control hardware used on military aircraft
    • Contribute to the development of new product requirements through consulting with customers and sales personnel
    • Validate conceptual problem solutions through trade studies and by applying sound engineering principles
    • Perform engineering calculations related to sizing, performance, tolerance and assembly
    • Be a key contributor to the preparation of technical proposal, cost estimates, and program schedules
    • Guide the evolution of conceptual design, technical project planning, detail design, and development testing throughout the program lifecycle
    • Support programs with some travel (5-10%) and the participation in presentations to customers
    • Represent Moog in a manner consistent with its leading-edge technical reputation
    • Create reliable designs through a comprehensive experimental development test program
    • Document designs, analyses, and test results with accurate and concise reports
    Required skills: • 6+ years of design and development engineering experience
    • Proficient in current versions of NX/UG computer-aided design software
    • Self-starter with strong analytical skills and a desire for constant improvement
    • Good sense of three-dimensional spatial orientation and knowledge of mechanical hardware design
    • Proficient in assembly/detail drawings, GD&T, and dimensional tolerance analysis
    • Team-oriented, with the desire to participate in and contribute to a high functioning team
    Scope:
    Education: • Bachelor’s degree in Mechanical or Aerospace Engineering
     
    Job Number: MB-4393
    Job Location: Torrance, CA
    Rate: 50/hr max
    Duration: 6 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Designer

    Description:
    Mechanical design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations. -Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis. -Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements. -Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam. Design Engineer will be required to liaison with the shop on engineering issues.
     
    Job Location: Savannah, GA
    Rate: Open
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INNOVA SOLUTIONS, INC
    Attention: Andrew Walbert
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.innovasolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Engineer

    Description:
    •Provides direction to manufacturing, test, subcontracts staff or technician staff.
    •Supports the coordination all activities between design engineering, QA, procurement, program office, planning, configuration management, vendor and customer.
    •Ensures design and procurement documents are in place to support procurement of component.
    •Documents findings and implements solutions and communicates results to engineering staff.
    •Assists the engineering staff in the analysis, investigation, and solution of routine engineering problems of limited scope related to small project(s) or to phase(s) of larger project(s), normally outlined in terms of task-related activities with detailed instructions.
    •Performs functional testing of equipment and systems in assigned area by utilizing standard engineering and scientific principles.
    •Documents findings and implemented solutions, and communicates results to project engineering staff.
    •Obtains and compiles test data related to modeling and analysis.
    •Requires making brief technical presentations to project staff.
    •Advises management/engineering staff and the program office of the status of work in progress, material availability, and potential design/production problems to ensure that personnel, equipment, materials and services are provided as needed.
    •Works with manufacturing engineering and project management to resolve any design related issue impacting production and to improve product design.
    •Perform root-cause failure analysis, requirements verification, develops failure tree & troubleshooting steps by utilizing standard engineering practices and scientific principles.
    •Represent the organization in technical review boards and customer meetings, as a member of the engineering project subsystem, providing solutions/status to technical issues associated with specific projects.
    •Performs review, approval, presentation and the tracking of engineering change request and assemblies manufactured for the functional test, with emphasis to the respective engineering project subsystem.
    •Assesses any given Incident Report (IR) due to a failure of a Unit Under Test (UUT), develops a Plan of Action and Milestone (POA&M) and supports the Failure Reporting and Corrective Action System (FRACAS).
    •Completes and reviews required documentation to disposition any equipment or system as a Unite Under Test (UUT), provides technical presentation before the customer as required and makes sure the engineers supporting the IPT or engineering project subsystem team are verbatim compliant with the process as required.
    •Provide direction and task activities to engineer staff under the IPT or engineering project subsystem
    •Provides disposition to Supplier Disposition Requests (SDR)/ Non-Conformances (NR) and others, due to manufacturing requests for information, request for design change or non-conformances on the parts being made.
    •Provides technical evaluations to support procurement decisions.
    •Supports and resolves issues and problems at the test site to support test schedule.
    •Develops procurement documents and specifications, Statement of Work (SOW) documents and proposals support for engineered components and assemblies.
    •Performs other duties as assigned or required.


    An EIT (Engineer in Training) certificate or PE (Professional Engineer) license are desirable

    •Familiar with ANSYS, NASGRO, AutoCAD, MatLab and MathCAD is desirable
    •U.S. Navy program acquisition, shipbuilding, ship design, construction and component engineering experience is desirable
    •Electrical/Electronic design experience is desired
    •Production and fabrication experience is a plus
    •Machine design experience is a plus

    Requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; four or more years of experience with a bachelors degree or two or more years of experience with a masters degree.
     
    Job Number: 161388
    Job Location: Rancho Bernardo, CA
    Rate: $43.00
    Duration: 6 Month Contract to Hire
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: CHIPTON ROSS
    Attention: Debbie Aubert
    Address: 420 CULVER BLVD
    City, State: PLAYA DEL REY, CA 90293
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Website: www.chiptonross.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Engineer III

    Description:
    Seeking a Mechanical Engineer III for an opening in Anaheim, CA.

    RESPONSIBILITIES:
    Under general supervision, the Mechanical Engineer III is responsible for the mechanical layout and packaging of power conversion equipment and other Navy based electronic systems. This person generates equipment layouts that satisfy system requirements and account for tradeoffs among thermal, mass properties, structural and manufacturing considerations.

    1.Interprets customer specifications to define requirements for mechanical designs.
    2.Applies the Inventor 3D CAD system to create mechanical layouts and drawings.
    3.Develops detailed fabrication and assembly drawings and performs tolerances analysis.
    4.Designs interconnecting brackets and support structure between components and subsystems.
    5.Supports other mechanical engineers and drafters in conceptual design and preparation of mechanical drawings.
    6.Generates project cost estimates and selects components for various designs.
    7.Performs thermal and structural analyses under the guidance of lead mechanical engineers.
    8.Generates engineering design change orders and performs checking work.
    9.Responsible for project budget/schedule adherence.
    10.Uses established and well defined engineering procedures.
    11.Knowledge of military and commercial standards pertaining to design, testing, hardware, material, and processes a must.
    12.Able to work simultaneously on a variety of projects.
    13.Takes directions from project engineer or department manager.

    REQUIRED EXPERIENCE:
    Bachelor of Science degree in Mechanical Engineering from four-year college or university. Must have at least 5 years of experience in mechanical design and engineering.

    1.Practical experience with 3-D CAD and analysis software tools.
    2.Knowledge of Mil-Specifications and qualification testing.
    3.Good communication skills

    •Electronics packaging experience and familiarity with Military specifications.
    •3D CAD fluency is also a must along with experience with complex systems.
    •Rigid flex/bus plane design
    •System level design

    ADDITIONAL EXPERIENCE:
    •Electronics Packaging – this is a requirement for ME III and up for me. – ME III and up
    •Recent 3d CAD experience (strong preference is Inventor) – ME II and up
    •Vault experience or similar and how recently they’ve used it – ME II and up
    •PLM experience (preferred, but not mandatory) – ME II and up
    •Able to read basic schematics (preferred, but not mandatory) – ME II and up
    •Tolerance Analysis – Preferred for ME II and ME III

    EDUCATION:
    Bachelor of Science degree in Mechanical Engineering from four-year college or university.

    WORK HOURS:
    9/80, Day Shift

    LANGUAGE SKILLS
    Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.

    MATHEMATICAL SKILLS
    Ability to work with mathematical concepts such as probability and statistics inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.

    REASONING ABILITY
    Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.

    PHYSICAL DEMANDS
    The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

    While performing the duties of this job, the employee is regularly required to walk; sit; use hands and fingers, handle, or feel; reach with hands and arms; and talk or hear. The employee is occasionally required to stand. The employee must regularly lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus.

    WORK ENVIRONMENT
    The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

    The noise level in the work environment is usually moderate.

    MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
     
    Job Number: 161355
    Job Location: Anaheim, CA
    Rate: $65 - $75
    Per Diem: No
    Overtime: Possible
    Duration: 6 mths.
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: CHIPTON ROSS
    Attention: Melody Mullins
    Address: 420 CULVER BLVD
    City, State: PLAYA DEL REY, CA 90293
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Website: www.chiptonross.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Engineers I - Anaheim, CA

    Description:
    STS AeroStaff Services is currently hiring Mechanical Engineers I for open positions in Anaheim, California.

    Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

    Job Purpose:

    Under general supervision, the Mechanical Engineer I interprets specifications and other requirements, performs complex analysis, design, plans, estimates tasks, directs the execution of detail design and ensures appropriate documentation on projects. The Mechanical Engineer I evaluates and integrates cost effective design, producibility, and manufacturing practices into mechanical designs. Works directly with all engineering supporting disciplines to establish product concepts and carries ideas through final product design. Coordinates and reviews the work of designers and drafters assigned to the program. Complexity of assignments requires the exercise of considerable initiative, planning, and independent judgment.

    Job Duties:

    • Reviews and interprets specifications and requirements to determine structural, thermal and critical safety characteristics/considerations for mechanical designs.
    • Supports other mechanical engineers and drafters in conceptual designs and the preparation of mechanical drawings.
    • Reviews and approves project documentation, change requests, etc.
    • Performs conceptual designs to meet project objectives, cost, and schedule.
    • Will be responsible for all phases of designs from concept through prototype manufacture and production.
    • Performs feasibility studies to reconcile project requirements with proposed designs.
    • Estimates material and labor costs for proposed designs and proposals.
    • Designs cooling systems for new and updated products.
    • Prepares and is responsible for project budget/schedule adherence.
    • Performs packaging and mechanical design of power conversion equipment.
    • Assists in cost estimates and interfaces with suppliers of components/sub-systems.
    • Conducts thermal, structural and tolerance analysis.
    • Strong knowledge of material and hardware selection including welding, fabrication practices, and machining tolerances to complete a cost-effective design.
    • Interfaces with customers, vendors, and production to develop product requirements and solutions.
    • Supports the manufacturing build and qualification testing requirements as needed.
    • Responsible for maintaining Computer Aided Engineering/Design skills in support of the mechanical engineering and design functions.

    Qualifications:

    • Bachelor's degree (BSME) from four-year college or university; and minimum 8 years related experience and/or training.
    • Knowledge of military and commercial standards pertaining to design, testing, hardware, material, and processes a must.
    • Knowledge of Navy/Military environmental qualification testing.
    • Knowledge of Mil-Specifications and contracting.
    • Skilled in finite element analysis.
    • Good communication skills.
    • Experience using 3-D CAD software tools in design function.
    • Autodesk Inventor, or equivalent modeling software (solid modeler) experience a must.
    • Able to obtain DOD security clearance.
    • Electronics packaging experience and familiarity with Military specifications.
    • 3D CAD fluency is also a must along with experience with complex systems.
    • Rigid flex/bus plane design and/or system level design is a plus.
    • Electronics Packaging experience is a plus.
    • Vault experience or similar and how recently they’ve used it is a plus.
    • LM experience (preferred, but not mandatory).
    • Able to read basic schematics (preferred, but not mandatory).
    • Tolerance Analysis experience is a plus.

    Requirements:

    • Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations.
    • Ability to write reports, business correspondence, and procedure manuals.
    • Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
    • Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
    • Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.
    • Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.
    • While performing the duties of this job, the employee is regularly required to sit; use hands and fingers, handle, or feel; and talk or hear.
    • The employee is occasionally required to stand, walk, and reach with hands and arms.
    • The employee must regularly lift and/or move up to 10 pounds.
    • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus.

    Benefits:

    STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

    We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

    Thanks for taking the time, and we look forward to hearing from you soon.
     
    Job Number: 37307
    Job Location: Anaheim, CA
    Rate: DOE
    Per Diem: No
    Overtime: Possible
    Duration: Temp
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STS AEROSTAFF SERVICES
    Attention: STS AeroStaff Services
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 800/800-2400
    Website: www.stsaviationgroup.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Systems Engineer MD

    Description:
    A highly motivated Mechanical Engineer seeking an opportunity to support flight test programs at NAS Patuxent River MD within the area of aircraft Hydraulics (HYD) and Landing Gear and Arrestments Systems (LAGs), Fuel Systems (FUEL), Power Thermal Management System (PTMS) or Electrical Power Systems (EPS). This position will require the candidate to train such that they can provide: test-planning, real-time control room monitoring, flight test data request, post flight data reduction & analysis, and on-aircraft troubleshooting of the subsystems of the JSF aircraft. Once trained in the primary discipline control room support, the candidate is expected to learn to troubleshoot these systems in the event of failures. It is expected that the candidate has the ability to learn continuously to expand aircraft system knowledge while working in a fast pace flight test environment. The candidate should be willing to support some evening and weekends in support of test activities and aircraft troubleshooting. The candidate must be willing to relocate to NAS Patuxent River, MD
     
    Job Number: DW - 0360
    Job Location: Patuxent River, MD
    Rate: Open
    Per Diem: Possible
    Overtime: Possible
    Duration: 12 mos
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: David Wilkinson
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Power Electronics Engineer

    Description:
    RESPONSIBILITIES:
    Provide engineering expertise in the area of design, analysis, and testing of spacecraft power electronics and DC-DC power converters 0.5W to 5kW.
    Lead electrical power system and sub-system level design trades and develop requirements.
    Define and perform electrical power system verification testing and analysis.
    Work with multidisciplinary teams of design, test, and production engineers to create new power electronics hardware.
    Create and maintain schedules for development efforts.

    BASIC QUALIFICATIONS:
    Bachelor of Science degree in electrical engineering.
    At least 5 years of experience in power converter development.
    Experience with DC-DC power converter development.
    PREFERRED SKILLS AND EXPERIENCE:
    Master of Science degree or Ph.D. degree in electrical engineering
    Candidate should have working experience generating original power converter designs from requirements and know how to design and verify power supply performance.
    Working experience in current mode control, compensation design, and loop gain measurements.
    Experience working with magnetics and practical design of custom transformers and inductors, including planar magnetics.
    Experience in modeling, simulation, and testing of power electronics.
    Experience with designing and testing power supplies for power quality and EMI/EMC compatibility.
    Passion for hardware simulation and development. Must be a hands-on engineer and excited to work in a fast paced environment.
    Strong grasp on power converter topologies and ability to select power converter architectures.
    Familiarity with spacecraft electrical power systems and knowledge of radiation effects.
    Experience with digital power supply compensation.
    Maximum power point tracker design and development.
    Power supply testing and packaging for harsh environments.
    Familiarity with lithium-ion battery handling, safety, and usage.

    ADDITIONAL REQUIREMENTS:
    Must be willing to work long hours and weekends as necessary.
     
    Job Location: Redmond, WA
    Rate: Open
    Duration: 3-6 months
    Input Date: 11/14/2020
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Sidney Williams
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Powerplant Engineer

    Description:
    We are seeking contract and direct hire Aerospace engineers with APU and/or Powerplant experience to work in Seattle, WA. The ideal candidates will have experience working on an aircraft certification program in 14CFR Part 25 Powerplant, APU and/or Fuel Systems.


    Varying Responsibilities:
    � Provide technical guidance in your area of expertise for type certification of a transport category aircraft.
    � Evaluate certification methods of compliance.
    � Coordinate test and certification requirements.
    � Author flight test and ground test plans including test hazard analysis.
    � Participate in ground and flight tests as required.
    � Analyze test data and evaluate compliance with regulations.
    � Prepare certification test reports.
    � Occasional international travel may be required.
    � Author flight test and ground test specifications.
    � Support flight test and ground test activities.
    � Analyze test data and evaluate system operation.
    � Prepare test reports.
    � Domestic and occasional international travel is required.
    Desired Qualifications:
    � APU experience, Fire Detection/Extinguishing, fuel feed and transfer, fuel logic system
    � Engine, particularly geared turbofan engine), FADEC and engine controls, cowl anti-ice, bleed air and fuel interfaces, oil system
    � Relevant work experience related to aircraft design, test, and certification.
    � Experience with 14CFR Part 25 certification, flight and ground test planning and test conduct, and data analysis.
    � Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
    � Ability to represent the company professionally and positively during client interactions and actively build rapport and trust to lead to greater business opportunities.
    � Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint.
    � Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
    � Consulting and direct hire opportunities available.

    If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

    Candidates must have legal authorization to work in the United States, Canada or Mexico
     
    Job Location: seattle, wa
    Per Diem: possible
    Overtime: possible
    Duration: LT
    Start Date: asap
    Input Date: 11/14/2020
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Dawn Bergau
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Production Planner - Level 1

    Description:
    Production Planner - Level 1

    Location: Syracuse, NY
    Pay Rate: $25/hr (DOE)
    Duration: 1 Year Contract
    Shift: First, 9/80

    *Must be a U.S. citizen*

    Job Description:
    -Performs the Make, Buy and / or Bill of Material (BOM) planning activities associated with Manufacturing Resource Planning (MRP) transactions.
    -Performs one or more multiple manufacturing activities within various manufacturing functions.
    -Maintains production systems integrity to drive inventory optimization to minimize cost.
    -Expedites and optimizes material flow through the supply chain to meet customer requirements.
    -Coordinates with manufacturing and Operations Management to provide shop floor control on make parts, analyzes and controls production schedule and capacity requirements, executes the plan, provides timely status and expedites or works around plans to preserve schedule.
    -Coordinates with Supply Chain Stakeholders including Procurement and Operations Management to determine appropriate time phased plan for procured parts and executes processes to ensure deliverables meet production schedule requirements.
    -Maintains MRP parameters including lead times and lot sizes and coordinates with Engineering and Change Board Rep to make the associated changes to the BOM

    Mandatory Skills:
    -Experience administering Manufacturing Resource Planning (MRP) tools.
    -Shop floor coordination experience. Coordinates with Supply Chain Stakeholders including Procurement and Operations Management to determine appropriate time phased plan for procured parts and executes processes to ensure deliverables meet production schedule requirements.
    -Maintains MRP parameters including lead times and lot sizes and coordinates with Engineering and Change Board Rep to make the associated changes to the BOM
    -Familiarity with SAP, MRP tools: 0-3 years


    Desired Skills:
    -Experienced administrator of SAP based material resource planning tools.
    -Familiarity with Solumina factory management and process planning tool, Electronic Contracting System (ECS), Electronic Shipping System (ESS), and Procure to Pay (P2P);
     
    Job Number: 6891
    Job Location: Syracuse, NY
    Rate: 25.00
    Per Diem: Possible
    Overtime: No
    Duration: 1 year
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Program Managers - Marana, AZ

    Description:
    STS AeroStaff Services is currently hiring Program Managers for open positions in Marana, Arizona.

    Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

    Qualifications:

    • Must have A&P License or a Bachelor’s Degree.
    • Must have a minimum of 5 years’ related experience.
    • Someone out of college who is able to show analytical data and metrix on how the scope of the projects are going will be considered.
    • Must be able to show the VP of Operations on a drop of a dime: “Hours vs Cost vs Percentage of Aircraft Completed” (Will completion be on time? If not what are the projections? etc.)

    Benefits:

    STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

    We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

    Thanks for taking the time, and we look forward to hearing from you soon.
     
    Job Number: 37227
    Job Location: Marana, AZ
    Rate: DOE
    Per Diem: Possible
    Overtime: Possible
    Duration: Temp
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STS AEROSTAFF SERVICES
    Attention: STS AeroStaff Services
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 800/800-2400
    Website: www.stsaviationgroup.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Project Engineer II - Electric Propulsion WA

    Description:
    Job Title: Project Engineer II
    Job Number: 158219/5736822
    Location: Redmond, WA
    Compensation: DOE
    Assignment Length: contract

    Description:

    ** Dual citizens or candidates with current passports to non-U.S. countries are not acceptable **

    Hall, Arcjet, and Gridded Ion Thruster propulsion systems are key components of satellites used by our military, NASA, and commercial satellite service providers. Missions include interplanetary exploration, orbit-transfer, and orbit maintenance for a wide range of spacecraft. Aerojet is the premier supplier of these enabling propulsion systems. The successful candidate will help assure the success of these space missions through development, qualification, and production of Hall, Arcjet, Ion, or other EP thrusters. The candidate will demonstrate attention to detail and the highest standards of quality assurance for the production of mission critical hardware. The successful candidate will also be a key resource in the design, development and testing of new electric propulsion products.

    Typical duties will include assisting the program manager in manufacturing and delivering flight hardware, guiding integrated product development teams, and leading product proposals. Additional duties will include performing technical analyses, conceptualizing new product designs, establishing system requirements and specifications, planning and conducting test and product verification activities, analyzing test data, developing new business relationships, and generating customer presentations. The following is an approximate split of typical duties: 70% - Lead technical activities on major programs. Perform tasks, delegate tasks and make decisions required to design, analyze, build and test electrical propulsion thrusters and thruster systems. Verify Aerojet's products are in compliance with customer requirements. Demonstrate to our customers that Aerojet is the best value supplier for their propulsion needs.
    20% - Support proposal activities and manage internal research and development efforts as assigned. 10% - Key contributor on investigations, driving to closure rapidly and rigorously while applying appropriate resources and personnel in a cost-effective manner. Accumulate, prepare, and present the documentation that is required to close an investigation, including reports, Test Procedures and Work Instructions.
    Strong verbal, written, presentation, and team-working skills with proficiency in Microsoft Office products (Word, Excel, and PowerPoint) is expected.
    Skills Required:

    At least 2 years work experience in an aerospace field, working on flight hardware.
    Must know MS Office programs.
    Must have minimum BS degree in mechanical or aerospace engineering.

    Desired:

    Experience with electric propulsion devices, particularly hall thrusters or ion engines.
    Experience with testing flight hardware and production of flight hardware.


    Education
    A Bachelor's degree in a related engineering discipline and 2 years of experience in propulsion, plasma devices or mission-critical technology is required.
    A Master's degree or higher in an Engineering discipline or Physics is preferred.
    Priority will be given to candidates with experience in a production environment developing and improving products and manufacturing processes.
     
    Job Number: MB-5736822
    Job Location: Redmond, WA
    Rate: 53/hr max
    Duration: 12 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Quality Engineers - Greensboro, NC

    Description:
    STS AeroStaff Services is currently hiring Quality Engineers for open positions in Greensboro, North Carolina.

    Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

    Job Purpose:

    Develops, directs, and accomplishes Quality Assurance programs that require the application of advanced Quality Assurance techniques and methods.

    Job Duties:

    • Performs Planning Work Instruction review prior to issuance to manufacturing, ensuring that Quality Assurance operations are correctly placed and drawing Quality Assurance requirements are adequately addressed.
    • Supports discrepancy report activity, along with calibration and tooling.
    • Directs quality assurance personnel assigned as inspectors in specific areas of responsibility.
    • Directs the solution of problems affecting the quality of completed aircraft. Assures that the planned courses of action are compatible with contractual commitment, established schedules, cost estimates, available facilities/equipment and other Quality Assurance considerations.
    • Develops Quality Assurance programs for new products/processes, outlining organization required, inspection techniques and methods, manpower requirements, and facility needs.
    • Analyzes inspection methods, tools, equipment, and facilities to determine basic requirements for control of quality at desired level.
    • Organizes, plans, and directs the development/administration/improvements of Quality Assurance functions in support of reliability programs.
    • Leads the activity of personnel assigned to this function in advanced phases of data analysis, correlation of failure reporting and processing methods and functional program study.
    • Performs assignments that require an ability to act independently with a minimum of supervision.

    Qualifications:

    • BS degree in Engineering or other related field of study preferred.
    • Experience in development and oversight of an FAA Part 21 approved Quality System preferred.
    • Experience, knowledge, or interest in Aerospace, new aircraft development, certification and/or manufacturing is preferred.
    • Strong analytical skills are required.
    • Experience, knowledge, or interest in Aerospace, new aircraft development, certification and/or manufacturing is preferred.

    Requirements:

    • Must be effective in working in an environment that requires the ability to: multi-task, adapt to frequently changing priorities, and to produce quality and timely deliverables within a setting where there are limited established procedures and protocol ambiguity may exist.
    • Excellent oral and written English communication skills.
    • Excellent computer Microsoft Suite application (Word, Excel, Access, Lotus Notes).
    • Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
    • Incumbents may be required to stand, sit, squat, walk, bend, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
    • Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
    • Read, hear, speak, and see with no restrictions, as required by job duties.
    • Comprehend and adhere to management directions and/or safety instructions with no restrictions.
    • Effectively communicate in Business English language.
    • Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.
    • Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties.

    Benefits:

    STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

    We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

    Thanks for taking the time, and we look forward to hearing from you soon.
     
    Job Number: 36337
    Job Location: Greensboro, NC
    Rate: DOE
    Per Diem: No
    Overtime: Possible
    Duration: Temp
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STS AEROSTAFF SERVICES
    Attention: STS AeroStaff Services
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 800/800-2400
    Website: www.stsaviationgroup.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Quality Inspector

    Description:
    Unique Skills:

    Candidates must have experience with aircraft mechanical systems installation with some experience with aircraft electrical systems installations preferred. Experience with Solumina, Smarteam, and Catia V5 preferred.


    Education and Experience Requirements:

    Bachelors degree in Mechanical, Manufacturing Engineering or related curriculum, or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Three (3) years Manufacturing Engineering, planning, or related technical experience.

    Position Purpose:

    Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning).

    Principal Duties and Responsibilities:

    Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 9. Utilize CADAM/CATIA data and nesting software to generate flat patterns, Master Models, NC data, and ply nests to meet Engineering and Manufacturing requirements. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

    Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. 3. Perform other duties as assigned.

    Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc. 4. Lean Six Sigma Greenbelt Certification or higher preferred.

    Languages Required (in addition to English): No Selection
     
    Job Location: Savannah, GA
    Rate: Open
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INNOVA SOLUTIONS, INC
    Attention: Andrew Walbert
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.innovasolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Real Time Simulator Engineer with active secret GA

    Description:
    Job title: Real Time Simulator engineer
    Job Number: 158190/0319
    Location: Marietta, GA
    Compensation: 55-75/hr(DOE)
    Assignment Length: 12 month contract
    Security Clearance Secret (Prime Contract:, Can start w/o clearance:No, Interim Clearance Sufficient:Yes)
    Non exempt
    1st shift

    Description:


    The selected candidates will become a technical staff member for laboratory development for F-22 and F-35 Pilot-in-the-loop simulators. .

    The specific assignment will be the development of real-time software products in Ada and C++ to be used in the F-22 and F-35 Labs.

    The successful candidate can expect simulation and modeling assignments in one or more of the following areas: RF and IR signatures, Electronic Warfare, Aircraft and associated Avionics for man-in-the-loop simulation, Aircraft Control and Propulsion Systems, air-to-air and/or surface-to-air missiles, air-to-ground weapons, missile control systems, expendable countermeasures, ground-based early warning, acquisition, and tracking radars.

    These software models will be developed in primarily in Ada with some C++. A Bachelor Degree or Master's Degree in Electrical Engineering or Aerospace Engineering with significant software development experience and simulation / modeling experience are preferred for these positions.

    However, other technical disciplines (Physics, Math, Computer Science, Computer Engineering, etc.) will be considered along with relevant work experience for applicability to this position.

    Prior use of Ada and C++ software languages is required as well as direct experience with real-time software systems and environments.

    Excellent communication skills, computer skills, and computer architecture knowledge and domain knowledge in simulation and/or real-time embedded software system is desired.

    Applicants selected will be subject to a government security investigation and must meet eligibility requirements for access to classified information.

    An active Secret clearance is required for this position.

    Development work uses C++, Ada, limited Python, Eclipse, DOORS, Dimensions, UML, and AdaCore GnatPro Studio (GPS).

    Skill/Experience/Education
    Mandatory:

    Experience required with developing real-time embedded software in C++ and/or Ada.

    Must have a proven ability to work well in a team environment.

    Excellent software development skills and experience

    Desired:

    Domain expertise in one or more of the following areas: RF and IR signatures, Electronic Warfare, Aircraft and associated Avionics for pilot-in-the-loop simulation, Aircraft Control and Propulsion Systems, air-to-air and/or surface-to-air missiles, air-to-ground weapons, missile control systems, expendable countermeasures, ground-based early warning, acquisition, and tracking radars
    Object Oriented Analysis and Design using UML

    Skill Matrix
    Skill Name Description Level (1-5, 5 being the highest)
    1 2 3 4 5 Years Mandatory(Yes/No)
    Software Development -- Ada Ability to develop software using the Ada 95 language 4-5 Years Yes
    Software Development -- C++ Ability to develop software using the C++ SW language 9-10 Years No
    Real-Time Software Development Ability to develop software in a real-time environment, understand the constructs and concepts of hard real-time programming 4-5 Years No
    Object Oriented Software Development ability to develop software using Object Oriented constructs and concepts 6-8 Years No
    Simulation Software Development Experience developing software for simulation, preferably aircraft and/or threat simulations 6-8 Years No
    Warfare Simulation Expertise Knowledge of electronic warfare concepts and how it applies in simulation 9-10 Years No
     
    Job Number: DW-0319
    Job Location: Marietta, GA
    Rate: 55-75/hr DOE
    Duration: 12 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Receiving Inspector

    Description:
    Responsibilities:

    Utilizes inspection equipment such as micrometers, calipers and profilometer.
    Approves or rejects items and documents inspection results as required.
    Performs documentation review and verification of certifications, specifications, and conformance to design and specification requirements.
    Communicates with internal customers, and suppliers as required to resolve inspection discrepancies.
    Use electronic ERP system to route parts and components to proper departments.

    Basic Qualifications:

    High School Diploma or GED required.
    Minimum 5 years of aerospace precision mechanical inspection experience required.
    Experience detecting design and drawing flaws.
    Receiving and in process inspection experience is required.
    Requires the ability to read and interpret engineering drawings and specifications using ASME Y14.5.
    Experience with GD&T and use of metrology tools and gauges required.
    Experience with Microsoft Word, Outlook and Excel.

    Preferred Skills and Experience:

    Capable to operate a forklift and other related inventory equipment.
    Experience within the Aerospace, automotive, semiconductor, or electronic fields.

    Additional Requirements:

    Ability to lift 25-30 lbs., lifting, standing, climbing, bending, grasping, sitting, pulling, pushing, stooping, stretching, and carrying are generally required to perform the functions of this position.
    Must be open to working all required shift hours, including overtime, and weekends, as needed.
     
    Job Location: Redmond, CA
    Per Diem: Possible
    Duration: 6 months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Sidney Williams
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    SUPPLIER & QUALITY ENGINEERS - AEROSPACE / DEFENSE

    Description:
    SUPPLIER & QUALITY ENGINEERS - AEROSPACE / DEFENSE

    Johnson Service Group (JSG) is teamed with a leader in the fuel, combustion, fluid, actuation and electronic control systems for the aerospace, defense and commercial markets. Our client is seeking talented Supplier and Quality Engineers to provide organizational support for quality & regulatory requirements compliance, system and process improvements as well as determining root cause and corrective action.

    Scope of Experience and Responsibilities:

    -3-6+ years of quality engineering experience within a machine shop, assembly, inspection and/or test environment, ideally with high precision parts and products, such as E/M actuators, hydraulic systems, etc.
    -AS9102 experience is required.
    -Evaluate Quality Management System (QMS) procedures, documents and work instructions.
    -Track, report and analyze quality metrics and identify improvements.
    -Quality engineering activities will include: Production Part -Approval Process (PPAP); First Article Inspection (FAI); -Measurement System Analysis (MSA); Failure Modes & Effects -Analysis (FMEA) and Statistical Process Control (SPC) processes.
    -Contribute to root cause and corrective action analysis (RCCA), including 8D process.
    -Heavily involved with regulatory and/or customer audits.
    -Drive continuous improvement principles, methods and tools.
    -Perform internal quality audits.
    -Knowledge of Title 14 CFR Parts 21, 43, 45, and 145 and related FAA requirements.
    -Solid understanding of corresponding regulatory and compliance requirements.
    -Excellent communication skills.
    -Evaluates procedures and work instructions that are required per the Quality Management System.
    -Working knowledge in the interpretation of engineering specifications, mechanical drawings, electrical schematics and -Geometric Dimensioning and Tolerancing (GD&T).
    -Knowledge of ISO9001, AS9100, TS16949, QS9000 and/or TS-16949.
    -Strong knowledge of Six Sigma principles, tools and methodology, and advocates utilization throughout the organization.
    -Understanding of PLC quality process and the use of quality planning tools.

    Education/Certification:
    -Bachelor's Degree in a related technical field.
    -Green Belt certification is preferred.
    -ASQ certification is a plus.

    Type of Employment: 6 months+

    Location: Santa Clarita, CA

    Compensation: Highly competitive
     
    Job Location: Santa Clarita, CA
    Rate: Open
    Per Diem: Split
    Overtime: No
    Duration: 6 months+
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Jay Kerrigan
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Senior Lead Power Design Engineer- contract

    Description:
    Senior Lead Power Design Engineer

    On behalf of our client Ingenium is recruiting and evaluating candidates for the position of Senior Lead Power Design Engineer. The Analog Power Electronics Lead Design Engineer designs analog power electrical circuits for converter, inverter, and various other power supply applications from a few watts to a few hundred KW for the next generation of products using state of the art technology. This is a 12-month contract position located in Pompano Beach, Florida.

    Principal Responsibilities:
    • Execute the design, analysis, or evaluation of assigned individual and team projects using sound engineering principles and adhering to business standards, practices, procedures, and product / program requirements
    • Use tools such as Mentor graphics to develop electrical circuit schematics and the latest analytical tools such as MATLAB and SPICE to verify circuit performance
    • Work with PCB designers to optimize space allocations, signal integrity, and power flow
    • Work with corporate research and development to apply the next generation of technology to existing products and develop new products
    • Provide technical leadership to personnel/ cross functional teams supporting the assigned project
    • Implement plans with guidance to meet technical requirements of assigned components and systems
    • Develop action plans with guidance to respond to issues/ problems
    • Lead or participate on teams assigned to address organizational initiatives and generic issues
    • Recommend, with guidance, the approach to meet the technical and program requirements
    • Participate and/or present in technical and program reviews
    • Assure proper documentation of technical data generated for the assigned projects and/or tasks consistent with engineering policies and procedures
    Experience and Qualifications:
    • 3 years of experience in a power electronics engineering position
    • Bachelor’s degree in engineering
    • Experience designing magnetic circuits and components for power electronic applications
    • Ability to coordinate several projects simultaneously
    Employment Criteria: This position includes access or potential access to ITAR technical data. Therefore, candidates will need to verify US Citizenship.

    Ingenium Technologies Corporation is a leading engineering services organization, providing outsourcing, consulting, and talent solutions.

    Employment Statement: Ingenium Technologies is an equal opportunity employer and does not discriminate on the basis of race, color, religion, gender, age, national origin, disability, veteran status, sexual orientation, or any other classification protected by federal, state or local law. Proof of eligibility for employment will be required upon employment.

    Additional Job Postings: http://www.ingeniumtech.com/jobs/
     
    Job Number: 63703
    Job Location: Rockford, IL Illinois
    Rate: 55
    Per Diem: possible
    Overtime: possible
    Duration: 12 mos
    Start Date: 1-9-16
    Input Date: 11/14/2020
    Firm Name: INGENIUM TECHNOLOGY
    Attention: David Johnson
    Address: 4216 MARAY DR UNIT A1
    City, State: ROCKFORD, IL 61107
    Phone: 815/315-9273
    Fax Phone: 815/399-8804
    Website: www.ingeniumtech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Senior Maintenance Technician

    Description:
    Title: Senior Maintenance Technician
    Location: Sylmar, CA
    Duration: 12 Months

    Job Summary:
    Under general supervision, the Senior Maintenance Technician performs preventative maintenance and repairs on production equipment.

    Primary Responsibilities
    • Troubleshoot equipment problems & perform root cause analysis
    • Performs repairs on manufacturing equipment.
    • Must have good mechanical & electrical comprehension, manual dexterity, and the ability to lift up to 30 lbs. up to five times daily, occasionally moving much heavier items (i.e. 175 lbs with moving equipment).
    • Performs scheduled maintenance on manufacturing equipment (daily, weekly, monthly, quarterly, semi-annually, annually)
    • May perform other maintenance & repair tasks on manufacturing tooling, equipment, & facilities
    • May support facility, environmental, & safety requirements
    • Will be actively involved in the implementation & sustaining of TPM & SMED
    • Develop & maintain critical spare parts inventory
    • Be able to enter & retrieve maintenance data in database
    • Maintain the highest ethical standards, even when challenged from above
    • Understand and live by clients ethics and business conduct policies

    Qualifications:
    • Employee must be able to take initiative and work with minimal supervision.
    • Have an understanding of and follow safe work practices.
    • Good communication skills and ability to get along well with others is essential.
    • Have familiarity with PC running Windows & maintenance software

    Education Requirements:
    • High school education or general education degree (GED) or equivalent combination of education and experience

    **Additional Information**:
    • Candidates must have good working knowledge and experience with various CNC, Lathes, Mills and Injection Molding machines and how they operate.
    • Candidates must have a basic understanding of machining principles.
    • Candidates must have experience troubleshooting and know how to troubleshoot issues with various manufacturing equipment used such as CNC, Mills and Injection Molding machines.
     
    Job Number: 51033
    Job Location: Sylmar, CA
    Rate: USA
    Duration: 7 mos
    Input Date: 11/14/2020
    Firm Name: BUTLER AEROSPACE & DEFENSE
    Attention: Mallik
    Address: SHELTON POINTE STE 204
    2 TRAP FALLS ROAD

    City, State: SHELTON, CT 06484
    Phone: 203/926-2705
    Website: www.butler.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Senior Project Engineer

    Description:
    The Project Repair and Overhaul Engineering (GPE) position will perform an integral technical role that could be based in any of our factories or Service Centers. The position is part of the Global Repair & Overhaul Engineering Organization (GROE), Avionics-Electronics (AvEl) group.

    The position provides an individual with the opportunity to exercise their diverse technical and specific product knowledge to define, create and implement: rework, repair and evaluation of avionic products.


    Responsibilities:


    Repair and Overhaul (R&O) Project Engineering (GPE) primary responsibilities:
    Own and drive GROE Value Creation Process (VCP) and project tracking
     
    Productivity and Cost Reduction


    Actively seek out and identify areas to standardize the repair and test procedures for maximum savings and effectiveness across Service Centers.
    Provide on-going Make vs. Buy vs. Repair analysis & identify areas of focus.
     
    Technology & Implementation
    Drive technology implementation projects to deliver operational improvements
    Research new and existing technologies for potential application

    Planning and Program Management


    Liaison coordination between site repair development engineering, site quality, test engineering, product engineering and FAA DER for substantiation and authorization of engineering documentation.
    Program manage repairs and projects using workflow tools and VCP
    Develop and support M&PM strategies & participate on CSB's as required.
     
    Basic Qualifications:
    A Bachelor's Degree in Engineering, Supply Chain, Business, or Project Management.
    Must be US Citizen or Permanent Resident due to ITAR/Export Requirements.



    Additional Qualifications:
    High degree of Microsoft Office familiarization
    PMP Certification
    Knowledge of FAA regulations & processes on avionics and related software.
    Understanding of FAR 21 (OEM-Factory) and FAR 145 (Repair Station).
    Understanding of specific regulations DO 178, DO 254 and DO 160.
    Understanding and compliance to export regulation and ITAR information.
    Digital/analog component systems knowledge.
    Knowledge of Interchangeability and Configuration Management.
    Awareness of product test requirements and limitation of test equipment to replicate aircraft.
     
     
    Job Number: 17-00279
    Job Location: Phoenix, AZ
    Rate: 50.00
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: NESCO RESOURCE
    Attention: Dave Mahabir
    Address: 101 COMMERCE ST STE 3001
    City, State: LAKE MARY, FL 32746
    Phone: 407/710-8000
    Fax Phone: 407/710-8001
    Website: www.nescoresource.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Sim & Software Engineer-Tech Spec 1

    Description:
    Sim & Software Engineer-Tech Spec 1
    Savannah, GA
    Rate: $53-$58


    Unique Skills:

    Areas of knowledge sharing, evaluating, and delivering results will be primarily in the following areas (but not limited to): - Matlab/Simulink experience modeling for hardware in the loop, real time aircraft systems - Simulation model/platform updates or improvements - Rectifying lab issues through troubleshooting, evaluation and solution development and implementation - Responsible for satisfying lab customer needs/requirements - Scripting and GUI development - Research and development in the areas of simulation and software - Designing software Standard Operating Process and Work Method - Reading electrical and simulation drawings - Integrating various I/O types (analog, discrete, data bus, etc) into the simulation platform - Understanding standard aircraft industry I/O protocols (ARINC 429, 664, 485, 717, etc) - Aircraft systems HWIL and integration into a real time simulation environment - Real Time simulation principles


    Education and Experience Requirements:

    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

    Position Purpose:

    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

    Principal Duties and Responsibilities:

    Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

    Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 6774
    Job Location: Savannah, GA
    Rate: $53-$58
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Brad Becker
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Simulation & Software Engineer

    Description:
    Simulation & Software Engineer
    1. Matlab/Simulink experience modeling real time aircraft systems 2. Aerospace background with avionics lab testing experience 3. Ability to understand aircraft electrical wiring diagrams as it relates to HIL simulation 4. Experience with high level programming or scripting language such as C/C++, Python 5. Knowledge of data protocols used in aerospace 6. Experience modeling aircraft systems in real time on industry standard simulation platforms (eg NI,Dspace,ADI) 7. Flight and/or aircraft system lab HIL simulation experience 8. Ability to work independently and self-govern priorities in accordance with lab customer needs 9. Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.

    Education and Experience Requirements:
    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.

    Position Purpose:
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

    Principal Duties and Responsibilities:

    Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned
     
    Job Location: Savannah, GA
    Rate: Open
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INNOVA SOLUTIONS, INC
    Attention: Andrew Walbert
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.innovasolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Software Code Tester

    Description:
    Software Code Inspector (Test Engineer)

    Job Location Danbury, CT

    Approximately 6 month contract

    Position Summary:

    The Software Code Inspector (Test Engineer II) will perform requirements analysis, design, implementation, integration, verification, and validation for automated test equipment, test program sets, as well as embedded diagnostics test applications. Ideally test experience should include inspection pertaining to style, functionality and design specifications. Candidate must be an energetic, highly motivated individual with the ability to work off shift and weekend hours if needed.

    Duties and Responsibilities:
    •Experience with requirements analysis
    •Test experience as it pertains to code inspection for style, functionality and requirements compliance
    •Strong familiarity with qualification methods (DO-178B or DO-178C)
    •Highly motivated individual with the ability to work off shift and weekend hours if needed
    •Ability to interpret Interface Design Descriptions and Software Requirements
    •Experience with C programming using a Windows environment (C++, Java, XML, Visual Basic, or Assembly)
    •Ability to work with little supervision cooperatively with all personnel in the organization
    •Demonstrate proactive ownership of issues and problems
    •Proficiency in Microsoft Office software including Word, Excel, PowerPoint, Visio
    •Must have Bachelor’s degree in Software/Computer/Electrical Engineering or Computer Science
    •Must have a minimum of 5 years experience in software design and/or software test engineering
    •Knowledgeable in both structured and object-oriented programming techniques
    •U.S. Citizenship required.



    Basic Qualifications:


    •Must have Bachelor’s degree in Software/Computer/Electrical Engineering or Computer Science
    •Must have a minimum of 5 years experience in software design and/or software test engineering
    •Knowledgeable in both structured and object-oriented programming techniques
    •Experience with National Instruments LabVIEW graphical development environment
    •Familiarity with Microsoft Project
    •This position requires the ability to lift up to 20 lbs. on an occasional basis. This position may require frequent sitting, standing and/or walking.
     
    Job Number: 50421
    Job Location: Danbury, CT
    Rate: $50-65/hour
    Per Diem: Possible
    Overtime: Possible
    Duration: 6+ months
    Start Date: 1/16/2017
    Input Date: 11/14/2020
    Firm Name: BUTLER AEROSPACE & DEFENSE
    Attention: Laura Leszek
    Address: SHELTON POINTE STE 204
    2 TRAP FALLS ROAD

    City, State: SHELTON, CT 06484
    Phone: 203/926-2705
    Website: www.butler.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Software Design Engineer NY

    Description:
    Job Title: Software Design Engineer
    Job Number: 157726/4394
    Location: East Aurora, NY
    Compensation: 45/hr
    Assignment Length: 8 month contract


    Description:

    This position is responsible for planning and executing the development and test of control software that will be embedded in new Moog products, in accordance with Moog’s Organizational Standard Software Process (OSSP), and within the cost and schedule constraints established for the project. The software design engineer is a trained professional who determines the approach necessary to resolve technical challenges.
    Essential job functions: 1. Delivery of executable software that meets performance requirements, as demonstrated by validating and verifying the software per Moog’s OSSP.
    2. Delivery of other software work products (documentation) that meets contractual requirements and in conformance with Moog’s OSSP.
    3. Perform project planning and oversight according to Moog’s OSSP, and provide status reporting management during project execution.
    4. On larger projects, lead a small team of other software engineers to accomplish a portion of the software development work, e.g., low-level design, code, or test.
    5. Control software project cost through reporting of earned value management data, and reporting scope changes to project management.
    6. Control software project schedule through reporting of earned value management data, making sure that critical dependencies on other groups are part of the project’s Master Schedule, and by being responsible for delivering software work products on time.
    7. Aid in the ongoing improvement of Moog’s OSSP by suggesting improvements, reporting metrics, and participating on Process Improvement Teams.
    Required skills: Labview programming experience a MUST HAVE
    Scope:
    Education: • Bachelor of Science degree in the field of Electrical, Computer, or Software Engineering, plus a minimum of 5 years’ experience in the design/development/test of real-time control software

    • Bachelor of Science degree in other engineering fields, and Computer Science, may be considered with appropriate additional experience in the design/development/test of real-time control software.
     
    Job Number: MB-4394
    Job Location: East Aurora, NY
    Rate: 45/hr max
    Duration: 8 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Software Design Engineer- Contract

    Description:
    Software Design Engineer

    On behalf of our client, Ingenium is recruiting and evaluating candidates for the position of Software Design Engineer. Our client is a leading manufacturer of highly complex electromechanical, mechanical, and hydromechanical aerospace components and systems for government and commercial applications. This is a contract position located in Buffalo, NY and is expected to last 8 months.

    Must be a US Citizen

    This position is responsible for planning and executing the development and test of control software that will be embedded in new products, within the cost and schedule constraints established for the project. The Software Design Engineer is a trained professional who determines the approach necessary to resolve technical challenges.

    Principal Responsibilities:

    • Delivery of executable software that meets performance requirements, as demonstrated by validating and verifying the software
    • Delivery of other software work products (documentation) that meets contractual requirements and conformance
    • Perform project planning and oversight, and provide status reporting management during project execution
    • On larger projects, lead a small team of other software engineers to accomplish a portion of the software development work, e.g., low-level design, code, or test
    • Control software project cost through reporting of earned value management data, and reporting scope changes to project management.
    • Control software project schedule through reporting of earned value management data, making sure that critical dependencies on other groups are part of the project’s Master Schedule, and by being responsible for delivering software work products on time
    • Aid in ongoing improvement by suggesting improvements, reporting metrics, and participating on Process Improvement Teams.

    Technical Skills: Must have LabVIEW programming experience

    Education:

    • Bachelor of Science degree in the field of Electrical, Computer, or Software Engineering, plus a minimum of 5 years’ experience in the design/development/test of real-time control software
    • Bachelor of Science degree in other engineering fields, and Computer Science, may be considered with appropriate additional experience in the design/development/test of real-time control software

    Employment Criteria: This position includes access or potential access to ITAR technical data. Therefore, candidates will need to verify US Citizenship.

    Employment Statement: Ingenium Technologies is an equal opportunity employer and does not discriminate on the basis of race, color, religion, gender, age, national origin, disability, veteran status, sexual orientation, or any other classification protected by federal, state or local law. Proof of eligibility for employment will be required upon employment
     
    Job Number: 63492
    Job Location: Rockford, IL Illinois
    Rate: $45-50/hr.
    Per Diem: no
    Overtime: possible
    Duration: 8 months
    Start Date: immediate
    Input Date: 11/14/2020
    Firm Name: INGENIUM TECHNOLOGY
    Attention: David Johnson
    Address: 4216 MARAY DR UNIT A1
    City, State: ROCKFORD, IL 61107
    Phone: 815/315-9273
    Fax Phone: 815/399-8804
    Website: www.ingeniumtech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Software Developers - Anaheim, CA

    Description:
    STS AeroStaff Services is currently hiring Software Developers for open positions in Anaheim, California.

    Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

    Duties:

    • Analyzes, installs, tests Enterprise-wide COTs business applications such as Deltek Costpoint or other Enterprise Resource Planning applications and assists end-users in system execution.
    • This technical position also includes development of Web Based applications using C# in .NET, MS Access, TSQL and customized business reports using Cognos Business Intelligence Software application.
    • Applies current graphics design and .NET technologies to develop, modify, maintain SharePoint environment.
    • Participates in the testing process through test review and analysis, test witnessing and certification of software.
    • Relies on experience and judgment to plan and accomplish goals.
    • Work with project stakeholders on a daily basis.
    • Works under only general direction, independently determines and develops approach to solutions.
    • Frequent inter-organizational and outside customer contracts.
    • Represents the organization in providing solutions to difficult technical issues associated with specific projects.
    • Work is reviewed upon completion for adequacy in meeting objectives.
    • Contributes to the completion of specific programs and projects.

    Qualifications:

    • Position requires a Bachelor or Master’s Degree in MIS, CIS, CSC or related discipline, plus 5 to 7 years’ experience.
    • Experience programming in .NET 3.5, C#, ASP.NET ,T-SQL, C/C++, XLM.
    • Experience with SharePoint Designer, InfoPath, Web Parts, and workflow creation.
    • Experience as a SharePoint Developer in the analysis, design, hands-on development and delivery of web-based applications.
    • Experience using jQuery, Client Object Model, and Service Oriented Architecture.
    • Experience with SharePoint’s application services framework including implementation, configuration, and usages of Search, Managed Metadata, and User Profile Services.
    • Attention to detail and commitment to high quality/error free deliverables.
    • A certain degree of creativity and latitude is required.
    • Must be motivated, independent and self-sufficient - able to receive an assigned task and see it through to completion with minimal supervision.
    • Ability to write Stored Procedures, write complex SQL queries, and ability to analyze the SQLdata is desired.
    • Experience with SQL Server Reporting Services, SQL Server Analysis Services, and/or SQL Server Integration Services a plus.
    • Microsoft MCPD 70-576, SharePoint 2010/2013 Designing and Developing Applications certification is a plus but not required.

    Benefits:

    STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

    We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

    Thanks for taking the time, and we look forward to hearing from you soon.
     
    Job Number: 37228
    Job Location: Anaheim, CA
    Rate: DOE
    Per Diem: No
    Overtime: Possible
    Duration: Temp
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STS AEROSTAFF SERVICES
    Attention: STS AeroStaff Services
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 800/800-2400
    Website: www.stsaviationgroup.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Software Engineer

    Description:
    ***Requires Active Secret Clearance***

    Description:
    This position supports Guidance, Navigation and Control (GN&C) efforts including day to day coordination between the program teams responsible for these combined efforts. Responsibilities also include integration and coordination with software design, implementation, and systems integration teams. Tasking also includes reporting to Technical Management and Cost Account Manager responsible for subsystem architecture and vehicle management (which includes software, guidance and control design and analysis). Must have demonstrated working knowledge of flight control system architecture, autonomous control algorithms & analysis, system integration and test. Requires knowledge and experience in Navigation design and implementation and knowledge and experience in seeker/radar integration into Navigation solution and Kalman filter design, trades and performance.

    Strong system engineering experience and the ability to mechanize the requirements for Guidance, Navigation and Control systems is highly desired. Prior experience in hypersonic flight regime is highly desired. The selected candidate will participate in addressing GN&C direction with senior leadership and the customer at program meetings.

    Mandatory:
    MATLAB/Simulink
    Bachelor's Degree in Electrical, Mechanical or Aerospace Engineering and several years of related experience. Hands on experience in the design of flight control laws. Must have a good understanding of aircraft stability, control, and aerodynamics.
     
    Job Number: 74097
    Job Location: Palmdale, CA
    Duration: 15 mos
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: GLOBAL CONTRACT PROFESSIONALS
    Attention: Ram
    Address: P O BOX 161127
    City, State: FORT WORTH, TX 76161-1127
    Phone: 817/847-6673
    800 Phone: 800/942-2376
    Fax Phone: 817/847-9444
    Website: www.teamglobal.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Software Engineer with active secret / flight control analysis software skills required CA

    Description:
    Lockheed Martin Aero 0355
    Job Title: Software Engineer
    Location: Palmdale, CA
    Compensation: 60-70/hr
    Assignment Length: 4 month contract
    Security Clearance Secret (Prime Contract:, Can start w/o clearance: No, Interim Clearance Sufficient: No)
    1st shift
    Non exempt

    Description:

    This Flight Controls lead position is a technical position performing complex guidance and control design and analysis for LM Aero - Advanced Development Programs.

    Responsible for guiding the design, development, integration and test of flight control laws.

    Must have demonstrated working knowledge of flight control system architecture, autonomous control algorithms & analysis, system integration, and test of vehicle systems.

    Prior experience in hypersonic flight regime is highly desired.

    Must have a good understanding of aircraft stability, control and aerodynamic characteristics.

    Strong system engineering experience and the ability to mechanize the requirements for Guidance, Navigation and Control systems is highly desired.

    The selected candidate will represent the program as a technical subject matter expert within the field of flight controls and will interact with senior leadership, customer and suppliers at program meetings.

    Skill/Experience/Education
    Mandatory:

    Current SECRET clearance with ability to obtain SAP/SAR access

    Bachelor's Degree in Electrical, Mechanical or Aerospace Engineering.

    Minimum 10+ years of hands-on experience in the design of flight control laws (algorithms & software) for aviation applications.

    Proficient with simulation/control laws (6-degree-of-freedom)development tools, aircraft/system modeling and Matlab/Simulink software.

    Desired:

    Demonstrated experience in all phases of flight control laws design life cycle - from requirements development, conceptual design, detailed design, code generation, software verification & validation, ground test and flight test phases.

    Knowledge and experience in Guidance and Control Algorithm design and implementation for high speed weapons.
    Familiarity with flight worthy software development process.
     
    Job Number: SW-0355
    Job Location: Palmdale, CA
    Rate: 60-70/hr DOE
    Duration: 4 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Software Engineer with active secret CA

    Description:
    Lockheed Martin Aero 0354
    Job Title: Software Engineer
    Location: Palmdale, CA
    Compensation: 60-70/hr
    Assignment Length: 4 month contract
    Security Clearance Secret (Prime Contract:, Can start w/o clearance:No, Interim Clearance Sufficient:No)
    Non exempt
    1st shift


    Description:

    This position supports Guidance, Navigation and Control (GN&C) efforts including day to day coordination between the program teams responsible for these combined efforts. Responsibilities also include integration and coordination with software design, implementation, and systems integration teams. Tasking also includes reporting to Technical Management and Cost Account Manager responsible for subsystem architecture and vehicle management (which includes software, guidance and control design and analysis). Must have demonstrated working knowledge of flight control system architecture, autonomous control algorithms & analysis, system integration and test. Requires knowledge and experience in Navigation design and implementation and knowledge and experience in seeker/radar integration into Navigation solution and Kalman filter design, trades and performance.

    Strong system engineering experience and the ability to mechanize the requirements for Guidance, Navigation and Control systems is highly desired. Prior experience in hypersonic flight regime is highly desired. The selected candidate will participate in addressing GN&C direction with senior leadership and the customer at program meetings.

    Skill/Experience/Education
    Mandatory:

    Current SECRET clearance
    MATLAB/Simulink
    Bachelor's Degree in Electrical, Mechanical or Aerospace Engineering and several years of related experience. Hands on experience in the design of flight control laws. Must have a good understanding of aircraft stability, control, and aerodynamics.
    Desired:

    Proficient with 6-degree-of-freedom simulation/control laws development tools, aircraft/system modeling and Matlab/Simulink software
     
    Job Number: DW-0354
    Job Location: Palmdale, CA
    Rate: 60-70/hr DOE
    Duration: 4 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Software Engineer with active secret CA

    Description:
    Lockheed Martin Aero 0353
    Job Title: Software Engineer
    Location: Palmdale, CA
    Compensation: 60-70/hr
    Assignment Length: 4 month contract
    Security Clearance: Secret (Prime Contract:, Can start w/o clearance:No, Interim Clearance Sufficient:No)
    Non Exempt
    1st shift

    Description:

    This GN&C engineer position is with our Historic Skunk Works in Palmdale, California.

    This is a technical position performing complex guidance and control design and analysis for precision guided munition systems. Job responsibilities include GNC System design, analysis, modeling, and simulation.

    Apply knowledge of guidance, navigation, and control theory to develop optimum trajectory guidance laws.

    Develop autopilot control laws (modern and classical). Develop guidance algorithms and conduct flight system performance analysis including nonlinear modeling, digital control, and system effectiveness analysis.

    Apply digital signal processing techniques and navigation system error analysis to verify sensor and filter performance.

    Perform post flight reconstruction and analysis.

    Develop, modify, and maintain software tools. Perform research and prepare presentations and reports.

    Skill/Experience/Education
    Mandatory:

    Current SECRET and ability to obtain a SAP/SAR clearance

    MATLAB/Simulink

    Master's Degree in Electrical, Mechanical or Aerospace Engineering or Applied Mathematics or Applied Physics 7+ years of experience in Guidance, Navigation or Controls theory and analysis.

    Desired:

    Demonstrated track record developing advanced autopilots, guidance laws and Kalman Filtering.
     
    Job Number: DW-0353
    Job Location: Palmdale, CA
    Rate: 60-70/hr DOE
    Duration: 4 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Software Engineers - Real Time Embedded

    Description:
    **Must have Active Secret clearance
    *Experience required with developing real-time embedded software in C++ and/or Ada.
    *Object Oriented Analysis and Design using UML
    *The successful candidate can expect simulation and modeling assignments in one or more of the following areas: RF and IR signatures, Electronic Warfare, Aircraft and associated Avionics for man-in-the-loop simulation, Aircraft Control and Propulsion Systems, air-to-air and/or surface-to-air missiles, air-to-ground weapons, missile control systems, expendable countermeasures, ground-based early warning, acquisition, and tracking radars.
     
    Job Number: Lock-Soft
    Job Location: Marietta, GA
    Rate: $70.00-$75.00/hour
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PDS TECH COMMERCIAL, INC
    Attention: Mary Ann McCarthy
    Address: 1215 FERN RIDGE PKWY STE 231
    City, State: ST LOUIS, MO 63141
    Phone: 314/628-9143
    800 Phone: 800/472-3737
    Fax Phone: 314/628-9485
    Website: www.pdstech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Software/Computer Automation Engineer - RM

    Description:
    Johnson Service Group is seeking a Software/Computer Automation Engineer for a 12+ month contract opportunity in Stratford, CT!

    No Corp to Corp or H1b sponsorship.

    Job Description:

    Perform duties associated with implementing electrical design software tools including CATIA V6 as well as enhancements to CCD/CADEX. Specific duties include:
    Managing project schedule performance and briefing senior management.
    Performing or contracting upgrades of automation code written for CATIA V5 to work with CATIA V6.
    Writing requirements documents for automation code.
    Managing test plans and validation of requirements completion.
    Performing design processes in CATIA V6 and documenting process steps.
     
    Job Number: 352701
    Job Location: Stratford, CT
    Rate: Open
    Per Diem: yes
    Overtime: yes
    Duration: 12 months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Richard Martinsen
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Stability and Control Engineer

    Description:
    Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

    The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations.

    Seeking multiple contract or fulltime Flight Sciences Engineers to join the teams in Seattle and Moses Lake with at least five years� experience in flight sciences, including:
    - Stability & Control
    - Aircraft Performance
    - 6DOF Flight Simulation

    Essential functions:
    � Define and validate flight test specifications
    � Perform data review and analysis for verification of aircraft level requirements
    � Utilize flight simulation models and data
    � Support ground and flight test activities
    � Prepare flight test reports

    Desired Qualifications:
    � Flight Sciences Engineer with experience with FAA Part 25 or Part 23 aircraft certification
    � Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
    � A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
    � Ability to represent the client professionally and positively during client interactions and meetings.
    � Bachelor or advanced degree in Aerospace Engineering.

    If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

    Candidates must have legal authorization to work in the United States, Canada or Mexico
     
    Job Number: FS/Sea
    Job Location: seattle, wa
    Per Diem: possible
    Overtime: Yes
    Duration: LT
    Start Date: asap
    Input Date: 11/14/2020
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Dawn Bergau
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Staff Design Engineer / electrohydraulic, electromechanical, and electropneumatic components / Cadence Allegro ORCAD VHDL Matlab Simulink NY

    Description:
    Job Title: Staff Design Engineer
    Job Number: 156119/4285
    Location: East Aurora, NY
    Compensation: 80/hr
    Assignment Length: 6 month contract

    Description:

    This position is responsible for development of complex electrohydraulic, electromechanical, and electropneumatic components and systems that will become the new products of Moog, Inc. The incumbent plans and conducts efforts requiring authoritative judgment in the evaluation, selection, and substantial adaptation and modification of standard and nonstandard engineering techniques, procedures, and criteria. The Staff Design Engineer independently devises new approaches for the problems encountered and plans and coordinates the work of others on major engineering projects.
    Essential job functions:
    Required skills: High-Power design experience for Launch and Exploration Systems.
    - 10 years minimum experience in Aerospace Electrical Engineering
    - AC and DC Converter/Inverter design experience
    - Motor Drive Experience (Brushless DC, Six Step, Induction, etc.)

    Must be able to design their own magnetics, emi filter, and power bridge.
    - Expectation is all simulations will be done in Moog tools (Cadence allegro and ORCAD suite)

    -Write VHDL and do Matlab Simulink would be a bonus
    -General Space/DOD knowledge
    Scope:
    Education: BSEE with 10+ Years Experience
     
    Job Number: MB-4285
    Job Location: East Aurora, NY
    Rate: 80/hr max
    Duration: 6 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Stress Engineer

    Description:
    the Stress Engineer performs design and testing of processes for the manufacture of electronic systems and components. Performs conventional, less complex engineering assignments that may involve equipment or product design, testing of materials, preparation of specifications, process studies, or research investigations. Instructions are provided on task specifications and design constraints. Close review of new design or applications is provided.



    Job Responsibilities

    Applies standard techniques involving only minor innovations of methodology to provide solutions to problems involving a limited number of variables.

    Normally focuses on existing products or processes.

    Participates with drafters, technicians, and others to contribute to project completion.

    Coordinates work with other engineers and operating groups to facilitate participation of various organizational units.

    Performs other related duties as required.


    Minimum Requirements:

    Bachelor's degree in Engineering from four-year college or university; and one-to-three years related experience and/or training; or equivalent combination of education and experience.

    Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations.

    Ability to write reports, business correspondence, and procedure manuals.

    Ability to effectively present information and respond to questions from managers, associates, clients, customers, and the general public.

    Ability to apply advanced mathematical concepts such as exponents, logarithms, quadratic equations, and permutations.

    Ability to apply mathematical operations to such tasks as frequency distribution, determination of test reliability and validity, analysis of variance, correlation techniques, sampling theory, and factor analysis.

    Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.

    Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.
     
    Job Location: Everett, WA
    Rate: Open
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INNOVA SOLUTIONS, INC
    Attention: Andrew Walbert
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.innovasolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Stress Engineer

    Description:
    Job Summary
    the Stress Engineer performs design and testing of processes for the manufacture of electronic systems and components. Performs conventional, less complex engineering assignments that may involve equipment or product design, testing of materials, preparation of specifications, process studies, or research investigations. Instructions are provided on task specifications and design constraints. Close review of new design or applications is provided.

    Job Responsibilities
    Applies standard techniques involving only minor innovations of methodology to provide solutions to problems involving a limited number of variables.
    Normally focuses on existing products or processes.
    Participates with drafters, technicians, and others to contribute to project completion.
    Coordinates work with other engineers and operating groups to facilitate participation of various organizational units.
    Performs other related duties as required.
     
    Minimum Requirements:
    Bachelor's degree in Engineering from four-year college or university; and one-to-three years related experience and/or training; or equivalent combination of education and experience.
    Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations.
    Ability to write reports, business correspondence, and procedure manuals.
    Ability to effectively present information and respond to questions from managers, associates, clients, customers, and the general public.
    Ability to apply advanced mathematical concepts such as exponents, logarithms, quadratic equations, and permutations.
    Ability to apply mathematical operations to such tasks as frequency distribution, determination of test reliability and validity, analysis of variance, correlation techniques, sampling theory, and factor analysis.
    Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.
    Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.
     
    Job Location: Everett, WA
    Rate: Open
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INNOVA SOLUTIONS, INC
    Attention: Andrew Walbert
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.innovasolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Structural Lab Technician - 1st Shift

    Description:
    Johnson Service Group seeking a Ground Test Structural Lab Technician for Stratford Ct.

    1st Shift

    Duties:
    Structural lab technician capable of working from engineering drawings with limited guidance to fabricate, assemble, install, diagnose and repair hydraulic, mechanical and controls systems associated with test facilities required to support ongoing Engineering Ground Test Development programs.

    Strong mechanical background and experience associated with Rotary Wing Aircraft hydraulics, mechanics, electronics and data acquisition systems preferred.

    Must be able to read and interpret engineering mechanical drawings and fluid power schematics.

    Must be able to assist with the buildup and monitoring of engineering laboratory facilities.

    Must be able to assemble required fixtures and facility hardware.
     
    Job Number: 352695
    Job Location: Stratford, CT
    Rate: open
    Per Diem: Possible
    Overtime: Possible
    Duration: 12 months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Linda Peck
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Substation Physical Drafter

    Description:
    Position Description:

    Creates and revises physical plans, sections, and details related to Electric Utility substation installations including, general arrangements, grounding, conduit and foundation designs.

    Performs first line quality assurance review of drawing package

    Electronically transmits completed design packages using current document management system.

    Coordinates project drafting schedules with design engineers.


    Job Requirements:

    Knowledge and Experience
    • Comprehensive knowledge of AutoCAD
    • Experience working on time-critical projects
    • Experience and competency working with Microsoft Office products (i.e., Word, Excel, Outlook)

    Skills
    • Mechanical perception to understand spatial relationships
    • Strong analytical skills
    • Acts with initiative and speed
    • Good work ethic; dependable and trustworthy
    • Adaptable to change
    • Learns quickly
    • Strong attention to detail
    • Ability to plan work and effectively manage time
    • Excellent interpersonal skills
    • Excellent communication abilities; written, oral and listening
    • Effectively organizes tasks, and manages multiple priorities and tight deadlines
     
    Job Location: Forrest Park, GA
    Per Diem: No
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: YOH SERVICES
    Attention: Steven Holsapple
    Address: STE 100
    11960 WESTLINE INDUSTRIAL DR

    City, State: ST LOUIS, MO 63146-3212
    Phone: 314/791-1565
    800 Phone: 800/298-0666
    Website: jobs.yoh.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Subsystems Engineer with active secret / Catia V5 CA

    Description:
    Job Title: Subsystems Engineer
    Job Number: 157859/0372
    Location: Palmdale, CA
    Compensation: 65-75/hr max
    Assignment Length: contract
    Active Secret security clearance with an investigation less than 5 years ago


    Description
    Candidate will be responsible for the structural design, installation, and integration for various structure and subsystems on a unique aircraft. Engineer must be capable of taking structural design and systems/subsystems requirements and developing installation designs including line replaceable units to antenna separation, bonding requirements, hydraulic, fuel, auxiliary power, and environmental control system tubing and harness routing.. Candidate will be completely responsible for various subsystem LRU's integration into the airplane for installation. They will be expected to identify and coordinate with the affected disciplines from Avionics, Software, Electrical, Structural Design, Material and Process Engineering and develop complete design solutions. Required to create detail designs including 3D lay-outs, assemblies, and installation drawings using CATIA V5. Must create separate detail parts lists to accompany drawings.

    Required Skills
    CATIA V5

    Desired Skills
    GD&T (Geometric Dimensioning and Tolerancing)

    Skill/Experience/Education
    Mandatory:

    --Active Secret security clearance with an investigation less than 5 years ago.
    --5 or more years experience in the design of aircraft primary or secondary structures.
    --Proficient with CATIA V5.
    --Must be a US Citizen or legally authorized to work in US as a permanent resident. This position is located at a facility that requires special access.
    --Understanding of drawing practices, material properties, and manufacturing processes.
    Desired:

    --Bachelor or above Degree in an Engineering Technical discipline.
    --Experience with composite structure design or manufacturing.
    --Experience with hand stress analysis for initial part layout.
    --Experience with GD&T (Geometric Dimensioning and Tolerancing) .
    --Excellent writing and communication skills.

    Skill Matrix
    Skill Name Description Level (1-5, 5 being the highest)
    1 2 3 4 5 Years Mandatory(Yes/No)
    Catia V5 Proficient 4-5 Years Yes
    Structural Design Proficient with aircraft structural design of composite and metallic part 4-5 Years Yes
    Subsystem Design Proficient with installation of aircraft subsystems. 4-5 Years Yes
     
    Job Number: DW-0372
    Job Location: Palmdale, CA
    Rate: 65-75/hr max
    Duration: 12 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Supplier Quality Engineers - Coatesville, PA

    Description:
    STS AeroStaff Services is currently hiring Supplier Quality Engineers for open positions in Coatesville, Pennsylvania.

    Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

    Job Summary:

    Investigate, analyze, and resolve supplier quality problems by conducting audits, analyzing defect trends, and leading continuous improvement projects.

    Job Duties:

    • Develop positive relationships and effective lines of communication with suppliers.
    • Drive “zero-defect” mentality within the supply base.
    • Champion problem solving and root cause analysis activities with suppliers to eliminate recurrence of nonconformities.
    • Identify technical problems with suppliers and implement corrective actions.
    • Work to resolve issues in a timely manner to ensure continuity of supply.
    • Initiate and follow up on Supplier Corrective Actions (SCARs) to ensure complete and effective toot cause analysis and corrective action implementation.
    • Perform periodic audits of Supplier Quality Systems for the purpose of assuring continued supplier conformance to the quality system requirements.
    • Monitor, communicate, and improve supplier quality key performance indicators (KPI’s) (i.e. SQ report card, DPPM, CARs, etc.).
    • Strategically lead supplier quality improvement projects to completion.

    Qualifications:

    • BA/BS Degree with 4-7+ years’ experience OR MA/MS Degree with 2-5+ years’ experience OR PhD Degree with 0-2+ years’ experience.
    • 5+ years in a manufacturing environment preferred.
    • Previous project management experience preferred.
    • Knowledge of various quality system methodologies - 8D, 5 Whys, Pareto Analysis, Six Sigma, DFMEA, PFMEA, PPAP, etc. preferred.

    Requirements:

    • Strong written and verbal communication skills.
    • Advanced computer skills using Microsoft Office applications.
    • Strong problem solving skills.
    • Strong organizational skills.
    • Must work well cross-functionally, with diverse groups of people and be able to function independently of direct supervision.

    Benefits:

    STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

    We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

    Thanks for taking the time, and we look forward to hearing from you soon.
     
    Job Number: 37012
    Job Location: Coatesville, PA
    Rate: DOE
    Per Diem: No
    Overtime: Possible
    Duration: Temp
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STS AEROSTAFF SERVICES
    Attention: STS AeroStaff Services
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 800/800-2400
    Website: www.stsaviationgroup.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    System Design Engineer

    Description:
    System Design Engineer
    6 month contract
    Torrance, CA

    The System Design Engineer participates in defining the overall technical solution by interfacing directly with project management and design engineers with the goal of providing system level architectures and trade spaces necessary to support the end-users technical, financial and schedule needs. Primary activities include creation of system architecture, performance prediction, system sizing analysis, creating technical requirements baselines and Verification and Validation planning

    • Meeting demanding performance requirements
    • Designing safety critical systems
    • Delivering systems that will perform to expectations in harsh environments

    Create block diagrams and definition of redundancies and system attributes to support performance safety requirements.
    • System box level architecture for all electronics requirements, environmental testing, verification metrics.
    • Interfacing with the customer and negotiation and clarification of requirements during PDR/CDR.
    • Integration testing and test support during qualification and certification
    • Preparing requirement compliance metrics
    • Act as a Project Manager for System Design portion of electronics development

    Ability to write clear and simple specification (DOORS)
    • Avionics experience required (Flight Control preferred)
    • Integration, test and qualification of electronic hardware
    • DO254 and ARP4754A guidelines and review process
    • Defining redundant systems to meet safety requirements
    • DO160 is a plus (Environmental & EMI/EMC)
    • Test Requirement for Test Equipment
    • Box level ATP generation
    • Box level Hardware/SW integration
    • Leadership skills - and Project Management experience

    BSEE - 5 - 10 years of experience required!
     
    Job Number: 50863
    Job Location: Torrance, CA
    Rate: 50.00
    Per Diem: Possible
    Overtime: Possible
    Duration: 6+ months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: BUTLER AEROSPACE & DEFENSE
    Attention: Laura Leszek
    Address: SHELTON POINTE STE 204
    2 TRAP FALLS ROAD

    City, State: SHELTON, CT 06484
    Phone: 203/926-2705
    Website: www.butler.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    System Design Engineer NY

    Description:
    Job Title: Systems Engineer
    Job Number: 157641/4382
    Location: East Aurora, NY
    Compensation: 70/hr
    Assignment Length: 7 month contract

    Description:

    The System Design Engineer participates in defining the overall technical solution by interfacing directly with project management and design engineers with the goal of providing system level architectures and trade spaces necessary to support the end-users technical, financial and schedule needs. Primary activities include creation of system architecture, performance prediction, system sizing analysis, creating technical requirements baselines and Verification and Validation planning
    Essential job functions:
    Required skills: · 4 years of progressive experience in the field of Engineering at MOOG is preferred. Equivalent years of experience outside of Moog will be considered.
    · Proven general capabilities/competencies in Initiating Action, Customer Focus, Building Strategic Working Relationships.
    · Proven specific capabilities/competencies in Modeling and Simulation, Verification and Validation Methods, Control System Design, Integration and Test.

    -Power user of Matlab/Simulink
    -Experience modeling complex systems (functionally/physically)
    -Experience in Aerospace/Flight Controls context a plus
    -Experience with Matlab Stateflow a plus
    Scope:
    Education: ·Masters of Science Degree in Electrical, Mechanical, Aerospace or Systems Engineering with 3 years of design / development experience is required An acceptable alternative is a Bachelor of Science Degree in Engineering plus 6 years of experience in a design / development engineering. A Bachelor of Science degree in Engineering Technology is not acceptable.
     
    Job Number: MB-4382
    Job Location: East Aurora, NY
    Rate: 70/hr max
    Duration: 8 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Systems Engineer

    Description:
    The System Design Engineer participates in defining the overall technical solution by interfacing directly with project management and design engineers with the goal of providing system level architectures and trade spaces necessary to support the end-users technical, financial and schedule needs. Primary activities include creation of system architecture, performance prediction, system sizing analysis, creating technical requirements baselines and Verification and Validation planning




    Required skills:

    • High proficiency level with Matlab/Simulink is required
    • Experience modeling complex systems, aircraft flight controls context is required
    • Experience with Stateflow is desired
    • Experience with dSpace AutomationDesk/ControlDesk (programming) is desired
    • Python coding experience is desired
    • Experience with IBM Rational DOORS for requirements management is desired
    • Experience with Atlassian JIRA and Subversion for change control is desired




    Education:

    ·Masters of Science Degree in Electrical, Mechanical, Aerospace or Systems Engineering with 3 years of design / development experience is required An acceptable alternative is a Bachelor of Science Degree in Engineering plus 6 years of experience in a design / development engineering. A Bachelor of Science degree in Engineering Technology is not acceptable.
     
    Job Number: 51010
    Job Location: Buffalo, NY
    Rate: up to $70/hr
    Per Diem: Possible
    Overtime: Possible
    Duration: 6
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: BUTLER AEROSPACE & DEFENSE
    Attention: Cynthia Lashley
    Address: SHELTON POINTE STE 204
    2 TRAP FALLS ROAD

    City, State: SHELTON, CT 06484
    Phone: 203/926-2705
    Website: www.butler.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Systems Engineer III (PA)

    Description:
    Applies an interdisciplinary, collaborative approach to plan, design, develop and verify a lifecycle balanced system of systems and system solutions. Evaluates customer and /operational needs to define and coordinate system performance requirements, integrate technical parameters and assure compatibility of all physical, functional and program interfaces. Performs various analyses to optimize total system of systems and/or system architecture. Performs analyses for affordability, safety, reliability, maintainability, testability, human systems integration, survivability, vulnerability, susceptibility, system security, regulatory, certification, product assurance and other specialties quality factors into a preferred configuration to ensure mission success. Develops the planning, organization, implementation and monitoring of requirements management processes, tools, risk, issues, opportunity management and technology readiness assessment processes. Resolves cross-functional technical issues.
    Additionally...
    Applies an interdisciplinary, collaborative approach to plan, design, develop and verify a lifecycle balanced system of systems and system solutions. Evaluates customer and /operational needs to define and coordinate system performance requirements, integrate technical parameters and assure compatibility of all physical, functional and program interfaces. Performs various analyses to optimize total system of systems and/or system architecture. Performs analyses for affordability, safety, reliability, maintainability, testability, human systems integration, survivability, vulnerability, susceptibility, system security, regulatory, certification, product assurance and other specialties quality factors into a preferred configuration to ensure mission success. Develops the planning, organization, implementation and monitoring of requirements management processes, tools, risk, issues, opportunity management and technology readiness assessment processes. Resolves cross-functional technical issues.

    Preferred product knowledge and technical acumen in developing and analyzing rotorcraft systems for safety and airworthiness in accordance with the specific customer operational and maintenance context (preferably military).
    Experience in developing and conducting a compliant safety management program in accordance government and industry standards to include MIL-STD-882, SAE ARP 4761 and SAE ARP 4754, DO-178B, DO-254 and Def Stan 00-56.
    Experience developing Safety Management Plans and applying aviation related system safety analysis methods to include System Safety Risk Assessments, Fault-tree Analysis (FTA), Master Minimum Equipment List (MMEL) development, Functional Hazard Assessment ( FHA), Operation & Support Hazard Analysis (O&SHA) Safety Assessment Report (SAR), and Software Safety Assessment Report.
    Experience with rotorcraft product and/or product support—a must.
    Preferred- System Safety experience, aerospace experience, aircraft systems, or software. Aerospace experience is desired but not required. Candidates with System Safety experience from other industries will be considered.
    Required Intermediate level Proficiency -Word, Excel and PowerPoint

    Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

    Additionally... BS or MS Engineering Degree or Technical Degree in Systems, Electrical, Aerospace, Mechanical, Software (Computing). Engineering, or related engineering degree from an ABET accredited school is highly desirable.
     
    Job Number: SystEngPA
    Job Location: Ridley Park, PA
    Rate: OPEN
    Per Diem: YES
    Overtime: Possible
    Duration: 6+ Months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INNOVA SOLUTIONS, INC
    Attention: Janice Plattner
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.innovasolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Systems Engineer Interns - Melbourne, FL

    Description:
    STS AeroStaff Services is currently hiring Systems Engineer Interns for open positions in Melbourne, Florida.

    Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

    Qualifications:

    • Only Florida Institute of Technology (FIT) students will be considered for this position.

    STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

    We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

    Thanks for taking the time, and we look forward to hearing from you soon.
     
    Job Number: 37239
    Job Location: Melbourne, FL
    Rate: DOE
    Per Diem: No
    Overtime: Possible
    Duration: Temp
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STS AEROSTAFF SERVICES
    Attention: STS AeroStaff Services
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 800/800-2400
    Website: www.stsaviationgroup.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Systems Engineer with active secret MD

    Description:
    Lockheed Martin Aero 0360
    Job Title: Systems Engineer
    Location: Patuxent River, MD 20760
    Compensation: 40-50/hr
    Assignment Length: 10 month contract
    Security Clearance Secret (Prime Contract:, Can start w/o clearance:No, Interim Clearance Sufficient:Yes)
    Non exempt
    1st shift

    Description:

    A highly motivated Mechanical Engineer seeking an opportunity to support the JSF CV and STOVL flight test programs at NAS Patuxent River MD as part of the Utilities and Subsystems (U&S) organization within the area of aircraft Hydraulics (HYD) and Landing Gear and Arrestments Systems (LAGs), Fuel Systems (FUEL), Power Thermal Management System (PTMS) or Electrical Power Systems (EPS).

    This position will require the candidate to train such that they can provide: test-planning, real-time control room monitoring, flight test data request, post flight data reduction & analysis, and on-aircraft troubleshooting of the subsystems of the JSF aircraft.

    Once trained in the primary discipline control room support, the candidate is expected to learn to troubleshoot these systems in the event of failures.

    It is expected that the candidate has the ability to learn continuously to expand aircraft system knowledge while working in a fast pace flight test environment.

    The candidate should be willing to support some evening and weekends in support of test activities and aircraft troubleshooting.

    The candidate must be willing to relocate to NAS Patuxent River, MD.

    Skill/Experience/Education
    Mandatory:

    - Mechanical or Aero Engineering Experience

    - Willingness to support occasional evening and weekend aircraft activities

    - possesses interim secret clearance

    Desired:

    - Experience with aircraft Hydraulic systems (HYD)

    - Experience with aircraft Landing Gear and Arrestment systems (LAGs)

    - Experience with aircraft Power Thermal Management Systems (PTMS)

    - Experience with aircraft Electrical Power Systems (EPS)

    - Experience with aircraft Fuel Systems (FUEL)

    - Previous lab test or aircraft flight test experience including: real-time data monitoring, flight test data requests and post-test data reduction and analysis

    - Experience with root cause analysis/investigation

    - Ability to develop on-aircraft troubleshooting plans utilizing hardware, software, and interface documentation and communicate them effectively to maintenance personnel

    - Software experience with: MS Office, Programming in C++, MATLAB, IADs, FireSpy IEEE 1394 Bus Analyzer and/or JEDI

    Skill Matrix
    Skill Name Description Level (1-5, 5 being the highest)
    1 2 3 4 5 Years Mandatory(Yes/No)
    Mechanical/Aero Engineering 4-5 Years No
     
    Job Number: SW-0360
    Job Location: Patuxent River, MD
    Rate: 40-50/hr DOE
    Duration: 10 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Systems Principal Engineer

    Description:
    POSITION DESCRIPTION
    POSITION OVERVIEW/ JOB DUTIES
    •Responsible for generating requirements, specifications, block diagrams, schematics, wiring diagrams, layout drawings, bills of material, flight manual supplements, and test plans/reports for the design, development and integration of complex aircraft electrical/avionics systems.
    • Provides overall management of the systems and electrical engineering deliverables.
    • Formulate, implement and track assigned engineering programs to achieve overall goals, technical requirements, schedules, contracts, and specifications.
    • Determine, control and report project engineering budget and variance.
    • Coordinate data submittals supporting FAA certification
    • Actively supports and participates in PDRs and CDRs.
    • Interface with other Engineering Leads, CPMs and other departments to ensure design requirements are fully defined and provide estimates for the required activities.
    • Required to complete technical reviews engineering budget and variance.
    • Coordinate data submittals supporting FAA certification
    • Actively supports and participates in PDRs and CDRs.
    • Interface with other Engineering Leads, CPMs and other departments to ensure design requirements are fully defined and provide estimates for the required activities.
    • Required to complete technical reviews of others drawings to ensure zero rework at the shop level.
    • Completes assignments within allotted time maintaining Engineering quality standards.
    • Provides timely technical assistance to production, quality and other departments in interpretation and implementation of design data.
    • Responsible for the following deliverables:
    o Electrical/ Systems Drawings
    o Block Diagrams
    o Electrical Load Analysis/ Electrical Load Change Report
    o Associated Test Plans
    o System Safety Assessment/ Functional Hazard Assessment
    o Aircraft Flight Manual Supplements
    o Associated Approvals
    o Wire Routing Drawings
    o Assist with ICAs, Certification Plans, and Issue Papers as required
    • Assist Engineering Director as required.
    • Perform other job duties as assigned. This position has indirect supervision responsibilities.


    POSITION REQUIREMENTS
    MINIMUM REQUIREMENTS
    • BS Engineering (Electrical or Avionics) required. Five years or more of experience in corporate jet aircraft avionics and electrical systems design. Avionics/Electrical Modification Design Experience required.
    • DER authorization preferred but not required.
    • Have awareness of design practices necessary to comply with FAA regulations and policies.
    • Be able to work either alone or as a team to solve problems.
    • Be a self-starter with the ability to generate alternative ideas.
    • Must be able to promote a team environment.
    • Must be able to work overtime & weekends as required.
    • Demonstrated problem-solving skills.
    • Have excellent written and verbal communication skills and excellent interpersonal skills.
    • Proficient with AutoCAD. Working knowledge of Word, Excel, and Outlook.

    PHYSICAL REQUIREMENTS
    MUST BE ABLE TO
    • Walk throughout the facility.
    • Work in a sitting position for long periods of time at a computer terminal.
    • Lift up to 75 Lbs.
    • Bend, kneel, and stretch to work on various parts of the aircraft.
    • Think clearly, logically, and analytically.
    • Write and speak clearly and intelligibly.
     
    Job Number: 16-646-3290
    Job Location: Springfield, IL
    Rate: Open
    Per Diem: NO
    Overtime: Possible
    Duration: Permanent
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Systems Software Engineer

    Description:
    Software Systems Engineer
    URGENT REQUIREMENT/NEED!
    The program is International Traffic in Arms Regulations (ITAR) controlled. U.S. Citizen required.
    Experience in software development and avionics systems engineering (development, analysis, test design, system architecture, etc.). Has performed predefined software and system design, development, verification, and integration activities.
    Capabilities
    - Performs the systems and software development activities with minimal oversight
    o Design activities including requirements capture, conceptual design (block diagram) and implementation.
    o Verification activities including test definition, test execution, and review of design life cycle artifacts.
    o Integration activities including the integration and troubleshooting of electrical designs in a lab environment.
    - Contributes to detailed discussions concerning systems and software requirements, architecture, and test strategy decisions.
    - Demonstrates a refined knowledge of software and systems design concepts, practices, and procedures and has developed specific areas of expertise.
    - Performs required activities according to department procedures, but demonstrates the insight necessary to suggest improvements based on the situation.
    - Exercises independent judgment and attempts to address issues prior to seeking guidance from senior staff members.
    - Exhibits a general understanding of industry related guidelines and uses that knowledge when performing activities.
    - Consistently performs tasks within accepted schedule.
    - Able to address customer technical issues within the technical bounds of the program.
    - Refers situations to supervisor when existing guidelines do not apply.
    - Takes initiative in determining and implementing appropriate procedures.
    - Develop designs that simplify and optimize HMI for the User.
    Activities
    Authoring/Validating/Updating Systems Test Cases and Procedures.
    - Writing, but mostly updating, test applications (e.g. Linux bash scripting, Linux/Windows Python, Windows batch scripting and command line, etc.).
    - Execute System test procedures, archive artifacts and record results.
    - Document generation and release.
    - Activities within DOORS are basic data entry and linking.
    - No DOORS DXL scripting or DOORS database management skills are necessary.
    - Report progress and estimate remaining effort.
     
    Job Number: WW010617AST
    Job Location: MILWAUKEE, WI
    Rate: DOE
    Per Diem: YES
    Overtime: YES
    Duration: 1 YEAR
    Start Date: JAN 23, 2017
    Input Date: 11/14/2020
    Firm Name: ENEA SOFTWARE AND SERVICES
    Attention: Walter Walonoski
    Address: 2555 E CAMELBACK RD STE 280
    City, State: PHOENIX, AZ 85016
    Phone: 480/753-9200
    Fax Phone: 480/753-6400
    Website: www.enea.com/services/expertise

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    TG Electrical AND UTILITY SYSTEMS

    Description:
    DESCRIPTION
    Support design, development, and test of Electrical Power and Utility Subsystems.
    5 to 7 years relevant experience.
    BS in Engineering Electrical or Aerospace.
    Experience with DOORS highly preferred.
     
    Job Number: 16-616-1405
    Job Location: Northeast
    Rate: Open
    Per Diem: Split
    Overtime: Possible
    Duration: 6 mths +
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Technical Designer - Wiring Installation Design (SC)

    Description:
    Develops, maintains and releases electrical/mechanical drawings, systems designs or engineering documentation and data by applying company, industry and governmental standards. Using design tools prepares documentation and incorporates design changes. Creates, develops and maintains systems designs by preparing design layouts, modifying existing designs and assisting in identifying design discrepancies. Supports engineering system design and functionality validation activities. Develops and maintains product installation designs and part designs ranging from simple to moderately complex. Coordinates activities and products with internal partners and external suppliers.

    AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.
     
    Job Number: EEDesSC
    Job Location: Charleston, SC
    Rate: OPEN
    Per Diem: YES
    Overtime: Possible
    Duration: 12+ Months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INNOVA SOLUTIONS, INC
    Attention: Janice Plattner
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.innovasolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Technical Service Librarian - 3 CA

    Description:
    Technical Service Librarian - 3 (Job Number: 16027697)

    Number of Openings: 1

    Location(s): United States-California-Manhattan Beach


    Shift: 1st Shift

    Target Start Date: Dec 5, 2016

    Pay Rate: $40 to $45/hr

    Work Schedule: 9/80

    Duration of Assignment: Up to 1 year

    Position Summary / Responsibilities
    Determines types of technical literature searches and sources of information to satisfy the scientific information needs of researchers and staff within the company. Conducts searches of technical literature, analyzes and evaluates data, extracts pertinent information, prepares information abstracts and bibliographies of material searched. Maintains extensive knowledge of literature resources and continuous contacts with local, national, and international information centers and agencies. Maintains and improves information retrieval capabilities. Assists in the selection of literature for inclusion in the library's collection and may translate foreign technical literature. Keeps abreast of developments in areas of interest to the company and periodically consults with researchers and other information users to ensure maximum usefulness and service.


    Basic Qualifications:

    · Associate of Science Degree in Information Technology, Engineering, or a related technical discipline plus 6 years of experience.
    · 6,000+ hours in the use of PTC Creo version 2 (or higher) and Intralink version 10 (or higher)
    · Experience in change control procedures and processes
    · Experience with Microsoft Office software 2010
    · Solid interpersonal and communication skills
    · Good organizational and problem solving skills with an ability to adapt quickly to changing requirements


    Preferred Qualifications:

    · Knowledge and some design experience of electronic parts and assemblies
    · Knowledge of government project and business rhythms
    · Experience with Cadence Virtuoso version 5.1 (or higher)
     
    Job Number: MB-16027697
    Job Location: Manhattan Beach, CA
    Rate: 45/hr max
    Duration: 12 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Technical Writer

    Description:
    Technical Writer
    UNIQUE SKILLS 1. Candidate should have extensive experience developing new and making revisions to Instructions for Continued Airworthiness (ICA) procedures. Experience should include, but not limited to, on-aircraft field level maintenance and inspection procedures, wire diagram and/or standard wire practice manual content from supplier and engineering data 2. Experience with ENOVIA SmarTeam or similar Product Lifecycle Management (PLM) database products strong desire 3. Familiarization with CATIA three-dimensional (3D) modeling and two-dimensional (2D) CAD standards, format, and 3D/2D software products 4. 'Hands-on' experience or working knowledge of aircraft inspection programs, aviation regulations, aircraft system content organization and OEM technical manuals development preferred, as a minimum candidate should possess knowledge of the MSG-3 Maintenance Program and ISC Sustaining process 5. Experience with aircraft technical manual content organization and authoring using S1000D spec and SNS, or recent experience of the same using iSpec standards required 6. Familiarization with Electrical Wiring Interconnection System (EWIS) best practices, applicable CFRs and development of related maintenance procedures desired 7. Accustom to working in a fast paced project environment and able to work overtime as required to meet deadlines 8. Understanding of and practical experience with Simplified Technical English, Spec ASD-STE100 and use of STE validation software desired 9. Mentor Graphics Capital Harness Systems (CHS) knowledge a plus

    Education and Experience Requirements:
    Bachelors degree or equivalent experience in the authoring of technical publications. Four (4) years of Technical Publications writing experience. Advanced knowledge of all aircraft systems methodology.
    Responsible (either individually or with other team members) for the writing of major portions of technical publications. Supports the complete workflow process to ensure successful completion of each revision cycle and distribution of technical publications. Complies with established quality processes to ensure accuracy, ease of use and timely delivery of each revision cycle content.

    Principal Duties and Responsibilities:

    Essential Functions: 1. Write technical publications content as directed. 2. Conduct reviews and analyze technical documents to gain a thorough understanding of how complex systems operate and how they are to be integrated into technical manuals to provide the end user with the level of text and graphics to support the efficient return to service of the aircraft system. 3. Consult with internal, external customers and Engineering to create/revise technical manuals to support the department/corporate operating priorities. 4. Provide input to management on new processes or technology for integration into the technical publications business model. 5. Assist in developing solutions for overcoming the technology/technical issues introduced by outside suppliers for incorporation into existing manuals. 6. Work with management, other departments, and team members in the development of specific project data. 7. Provide liaison with Completion Center, Technical Operations, Production and/or Completion Engineering, Service Center to obtain the necessary approval for technical information prior to its release to customers. 8. Participate with publications team to ensure all internal department workflows and business processes are followed for issues relating to producing and delivering technical publications and associated Computerized Maintenance Program (CMP) data. 9. Work with internal/external customers in the development of specific project requirements of source data to ensure a seamless incorporation of new data in the publications environment.


    Other Requirements: 1. At least three (3) years of Standard Graphic Markup Language (SGML) or SGML-related software applications 2. Strong technical writing and communication skills are required. 3. Ability to read and interpret blueprint and Engineering Orders. 4. Must have a thorough knowledge of aircraft tools, test equipment, vendor coding, parts nomenclature, maintenance procedures, and of aircraft equipment and maintenance.
     
    Job Location: Savannah, GA
    Rate: Open
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INNOVA SOLUTIONS, INC
    Attention: Andrew Walbert
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.innovasolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Technical Writer

    Description:
    1. Candidate should have extensive experience developing new and making revisions to Instructions for Continued Airworthiness (ICA) procedures to include but not limited to maintenance and inspection procedures, structure repair, fault isolation, wire diagram and/or parts catalogs from supplier and engineering data 2. Experience with ENOVIA SmarTeam or similar Product Lifecycle Management (PLM) database products strong desire 3. Familiarization with CATIA three-dimensional (3D) modeling and two-dimensional (2D) CAD standards, format, and 3D/2D software products 4. 'Hands-on' experience or working knowledge of aircraft inspection programs, aviation regulations, aircraft system content organization and OEM technical manuals development preferred, as a minimum candidate should possess knowledge of the MSG-3 Maintenance Program and ISC Sustaining process 5. Experience with aircraft technical manual content organization and authoring using S1000D spec and SNS, or recent experience of the same using iSpec standards required 6. Familiarization with Electrical Wiring Interconnection System (EWIS) best practices, applicable CFRs and development of related maintenance procedures desired 7. Accustom to working in a fast paced project environment and able to work overtime as required to meet deadlines 8. Understanding of and practical experience with Simplified Technical English, Spec ASD-STE100 and use of STE validation software desired 9. Mentor Graphics Capital Harness Systems (CHS) knowledge a plus

    Education and Experience Requirements:
    Bachelors degree or equivalent experience in the authoring of technical publications. Four (4) years of Technical Publications writing experience. Advanced knowledge of all aircraft systems methodology. See Other Requirements in Job Description.

    Position Purpose:
    Responsible (either individually or with other team members) for the writing of major portions of technical publications. Supports the complete workflow process to ensure successful completion of each revision cycle and distribution of technical publications. Complies with established quality processes to ensure accuracy, ease of use and timely delivery of each revision cycle content.

    Principal Duties and Responsibilities:

    Essential Functions: 1. Write technical publications content as directed. 2. Conduct reviews and analyze technical documents to gain a thorough understanding of how complex systems operate and how they are to be integrated into technical manuals to provide the end user with the level of text and graphics to support the efficient return to service of the aircraft system. 3. Consult with internal, external customers and Engineering to create/revise technical manuals to support the department/corporate operating priorities. 4. Provide input to management on new processes or technology for integration into the technical publications business model. 5. Assist in developing solutions for overcoming the technology/technical issues introduced by outside suppliers for incorporation into existing manuals. 6. Work with management, other departments, and team members in the development of specific project data. 7. Provide liaison with Completion Center, Technical Operations, Production and/or Completion Engineering, Service Center to obtain the necessary approval for technical information prior to its release to customers. 8. Participate with publications team to ensure all internal department workflows and business processes are followed for issues relating to producing and delivering technical publications and associated Computerized Maintenance Program (CMP) data. 9. Work with internal/external customers in the development of specific project requirements of source data to ensure a seamless incorporation of new data in the publications environment. .

    Other Requirements: 1. At least three (3) years of Standard Graphic Markup Language (SGML) or SGML-related software applications 2. Strong technical writing and communication skills are required. 3. Ability to read and interpret blueprint and Engineering Orders. 4. Must have a thorough knowledge of aircraft tools, test equipment, vendor coding, parts nomenclature, maintenance procedures, and of aircraft equipment and maintenance.
     
    Job Location: Savannah, GA
    Rate: Open
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INNOVA SOLUTIONS, INC
    Attention: Andrew Walbert
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.innovasolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Technical Writers - Seattle, WA

    Description:
    STS AeroStaff Services is currently hiring Technical Writers for open positions in Seattle, Washington.

    Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

    Duties:

    • Under minimal direction, supports the preparation and revision of Maintenance & Engineering manuals.
    • The Technical Writer works under high-pressure to meet deadlines that safeguard a safe and compliant operation.
    • Author, revise, and publish documentation that provides all Maintenance and Engineering personnel with necessary information and instructions to perform their duties and responsibilities with a high degree of safety.
    • Publish documentation that adheres to applicable Code of Federal Regulations (CFR)s, Department of Defense (DoD) standards, Occupational Safety & Health Administration (OSHA) Laws and Regulations, and Air Transport Association (ATA) Specifications, as they relate to publications.
    • Provide accurate information in technical documents by ensuring correct content and format with correct spelling, punctuation, and grammar.
    • Review published materials and recommend revisions or changes in scope, content, and methods of reproduction.
    • Assist with and develop supporting materials (illustrations, flow diagrams, tables, etc.).
    • Organize material and complete change request according to set standards regarding order, clarity, conciseness, style, and terminology.
    • Participate in the preparation of procedures for processing technical data through the various stages of development and publication.
    • Track and monitor the flow of all documents from inception to publication.
    • Develop aircraft maintenance programs procedures, work documents, and diagrams to support maintenance in meeting the safe and economical maintenance and operations standards of the aircraft.
    • Support the efforts of Subject Matter Experts to complete projects in accordance with established deadlines with strict adherence to quality standards.
    • Interface with Subject Matter Experts in the writing, editing, and publication of various types of documents such as technical manuals, maintenance programs documentation, and training material etc.
    • Coordinate the publication and revision of various in-house technical publications with other Writers in the department.
    • Identify trends and communicate suggestions for improving efficiency and effectiveness of existing Publications processes to ensure accuracy, usability and currency of documentation.
    • Create professional documentation of processes and procedures for use by all team members. Update documentation when changes are made.
    • Investigate and resolve problem areas through self-discovery and by interfacing with various management and maintenance personnel.
    • Perform the self and peer edit of documents to ensure format, content, flow and integrity are in conformance with internal quality management system and customer requirements.
    • Provide quality assurance checklists for all document deliverables.
    • Compile daily/weekly/monthly activity reports and periodic project reports.
    • Provide documented, well thought out solution alternatives and recommendations on issues and process improvements.
    • May perform other responsibilities as assigned.
    • Responsibilities and duties may change when circumstances dictate. (e.g., emergencies, changes in workload, rush jobs or technical developments.).

    Qualifications:

    • Must have a Bachelor’s Degree in English, Technical Communications, or equivalent; formal training equivalent to the completion of a discipline and three or more years of progressive experience in Aviation or other Technical Communication discipline.
    • Experience with Adobe Framemaker and Acrobat Pro Microsoft Word, Excel, Visio, and Outlook CorelDRAW.
    • Ability to work both independently and jointly in a team environment is essential.
    • Ability to work under pressure at near 100% accuracy while meeting inflexible deadlines.
    • Detail oriented.
    • Demonstrated capability to communicate verbally and in writing.

    Benefits:

    STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

    We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

    Thanks for taking the time, and we look forward to hearing from you soon.
     
    Job Number: 36975
    Job Location: Seattle, WA
    Rate: DOE
    Per Diem: Possible
    Overtime: Possible
    Duration: Temp
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STS AEROSTAFF SERVICES
    Attention: STS AeroStaff Services
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 800/800-2400
    Website: www.stsaviationgroup.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Telemetry and Data Operations

    Description:
    Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.
    The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations
    This individual in this position will work with engineers to design and install instrumentation to support the collection of flight test data. The ideal candidate is self-motivated, detail oriented, and knowledgeable on instrumentation theory.
    We are seeking Telemetry and Data Operators to join the team in Moses Lake, WA.
    Knowledge and Responsibilities:
    � Operate and maintain telemetry, data processing, and video systems in support of flight test data collection
    � Assist in the preparation and check-out of telemetry systems, conduct telemetry operations, and process data post flight.
    � Flight test experience is strongly desired
    � Candidate will have knowledge of the operation of tracking antennas and telemetry receivers as well as all standard lab equipment used for the maintenance and troubleshooting of telemetry systems and subsystems
    � Candidate must be proficient in the use of data servers and computer peripherals for the purpose of data downloading, processing, managing, backup, and recovery of data
    If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

    Candidates must have legal authorization to work in the United States, Canada or Mexico
     
    Job Number: Tel/ML
    Job Location: Moses Lake, wa
    Per Diem: possible
    Overtime: possible
    Duration: LT
    Start Date: asap
    Input Date: 11/14/2020
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Dawn Bergau
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Test Engineer

    Description:
    Test Engineer

    Location: Owego, NY
    Pay Rate: $25/hr - $29.80/hr (DOE)
    Duration: 1 Year Contract
    Schedule: 9/80
    Secret Clearance: (Prime Contract: Can start w/o clearance: Yes; Interim Clearance Sufficient: Yes)
    *Must be a U.S. Citizen*

    **This is primarily a first shift position. However, any candidate submitted should on occasion and driven by business needs plan for working an off shift or alternate schedule which could contain 2nd or 3rd shift hours and/or weekend work**

    Job Description:
    Specific duties will include:
    -test procedure development;
    -test planning and preparation;
    -test procedure execution;
    -coordinate system resources to support testing;
    -support test development, integration, and anomaly resolution as required;
    -support off-hours testing and associated projects as needed.
    -This role requires knowledge/experience with electronic circuits, automated test software, manufacturing processes, and the manufacturing test environment.
    -Additionally, the ability to interpret test requirements, implement requirement based test methodologies, and utilize statistical data analysis is required.
    -Personal characteristics must include flexibility, adaptability, a self-starter requiring minimal direct supervision, able to work both individually and as part of a team, and able to interact and work well with Company employees and internal customers
    -An eye test is required and is a condition of this offer

    Mandatory Skills:
    Experience with:
    -test procedure development;
    -test planning and preparation;
    -test procedure execution;
    ** This role requires knowledge/experience with electronic circuits, automated test software, manufacturing processes, and the manufacturing test environment. **
    -the ability to interpret test requirements, implement requirement based test methodologies, and utilize statistical data analysis is required.
    -Must also accept the schedule which on occasion includes off-shift (afternoon, nights, and weekends) scheduling to meet business needs.

    Education:
    Bachelors degree from an accredited college in a related discipline, or equivalent experience/combined education, with 2 years of professional experience; or no experience required with a related Masters degree. Considered experienced, but still a learner.
     
    Job Number: 6885
    Job Location: Owego, NY
    Rate: 25.00 - 29.80
    Per Diem: Possible
    Overtime: Possible
    Duration: 1 year
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Test Engineer - Level 2

    Description:
    Test Engineer - Level 2

    Location: Dallas, TX
    Duration: 1 Year Contract
    Pay Rate: $50/hr - $60/hr (DOE)
    Shift: First, 9/80
    Secret Clearance: (Prime Contract: Can start w/o clearance: Yes; Interim Clearance Sufficient: Yes)

    *Must be a U.S. citizen*

    Job Description:
    -Designs, develops, and implements testing methods and equipment.
    -Plans and arranges the labor, schedules, and equipment required for testing and evaluating standard and special devices.
    -Compiles data and defines changes required in testing equipment, testing procedures, or new testing requirements.

    Mandatory Skills:
    -One of the following degrees: BSEE or BSEET or BSCE
    -Hardware design and troubleshooting knowledge for computer based automated test equipment
    -Familiarity with National Instruments development tools
    -C programming language: 0-3 Years
    -MS Office – Word, Excel, and PowerPoint: 0-3 Years

    Desired Skills:
    -Experience developing or maintaining ATE for military electronics.
    -MS Visio: 0-3 Years
    -NI LabVIEW: 0-3 Years
    -NI Teststand: 0-3 Years
    -NI CVI: 0-3 Years
     
    Job Number: 6920
    Job Location: Dallas, TX
    Rate: DOE
    Per Diem: Possible
    Overtime: Possible
    Duration: 1 year
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Test Engineer - Level 2

    Description:
    Test Engineer - Level 2

    Location: Dallas, TX
    Duration: 1 Year Contract
    Pay Rate: $50/hr - $60/hr (DOE)
    Shift: First, 9/80
    Secret Clearance: (Prime Contract: Can start w/o clearance: Yes; Interim Clearance Sufficient: Yes)

    *Must be a U.S. citizen*

    Job Description:
    -Designs, develops, and implements testing methods and equipment.
    -Plans and arranges the labor, schedules, and equipment required for testing and evaluating standard and special devices.
    -Compiles data and defines changes required in testing equipment, testing procedures, or new testing requirements.

    Mandatory Skills:
    -One of the following degrees: BSEE or BSEET or BSCE
    -Hardware design and troubleshooting knowledge for computer based automated test equipment
    -Familiarity with National Instruments development tools
    -C programming language: 0-3 Years
    -MS Office – Word, Excel, and PowerPoint: 0-3 Years

    Desired Skills:
    -Experience developing or maintaining ATE for military electronics.
    -MS Visio: 0-3 Years
    -NI LabVIEW: 0-3 Years
    -NI Teststand: 0-3 Years
    -NI CVI: 0-3 Years
     
    Job Number: 6892
    Job Location: Dallas, TX
    Rate: 60.00
    Per Diem: Possible
    Overtime: Possible
    Duration: 1 year
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Test Engineer Aerospace - Contract DY

    Description:
    Test Engineer Aerospace - Contract
    Ingenium is looking for a Test Engineer to work at a client’s facility in Dayton Ohio supporting test of development high speed rotating turbine type equipment. Contract.

    Must be a U.S. Citizenship or Lawful Permanent Resident. No Visa or Student Visa candidates considered.

    Additional Job Postings: http://www.ingeniumtech.com/tech_staffing/
    Responsibilities:
    Individual serving in this role will operate as a member of one of the new product test teams. The product will be a high speed, pneumatic driven air turbine device connected to a gearbox speed reducer. The general technical direction will be provided by the Staff/Lead test engineers assigned to the product. The role will be as a test supporting element that will be assigned specific test and/or test setup tasks in support of the objectives of the project team. It will be the responsibility of the person serving in this role to complete the required technical activities in compliance with the quality and deliverable requirements provided by the design team project leadership. It will also be the responsibility of this person to complete all necessary reports and documentation supporting the decision-making process necessary to complete the requested tasks.
    Desired Qualifications
    5 years of experience in testing and test evaluation
    Ability to understand complex engineering principles / situations / problems
    Ability to work with non-technical personnel on technical matters
    High electro-mechanical aptitude
    Experience working with reciprocating diesel engines and gas turbine engines and engine control
    Experience with engine maintenance
    Strong team player with willingness to pitch in and help out where needed
    Detail oriented
    Experience working with precision data transducers for both mechanical and electrical signal data
    acquisition
    Experience working with high speed rotating equipment
    Experience working with high pressure pneumatic and hydraulic systems
    Experience with LabView for both data acquisition and control applications
    Experience with Matlab and Microsoft Office tools
    Experience with high speed data acquisition software and hardware
    Experience with AC and DC motors, drives, and complex test arrangements

    Responsibilities
    Assist in creation and implement of test plans for turbine and power transmission subassemblies and complete starter assemblies both on-site and on customer site testing
    Assist technical personnel in all aspects of engineering test validation
    Make technical decisions by applications of specialized knowledge / skills
    Analyze data test results and assist in preparation of necessary summary documentation
    Perform and analyze basic and advanced testing and analysis as need to support design and development and test objectives
    Participate in recurring, cooperative test planning, and reporting activities
    Take direction from Design and Project Leads and the Test Group Leader
    Provide hands-on support to the technical teams through preparation and execution of test programs and test set-up and test execution
    Develop test plans with the engineering team to ensure proper validation of the components under test
    Perform assigned tasks including definition, approach, analysis, review, and implementation on schedule and within budget
    Develop and maintain appropriate test procedures, documentation, and training materials as is appropriate to support the operations of the testing areas
    Edit and support creation of LabVIEW programs to automate and monitor tests
    Support usage of, revision to, and general organization existing LabVIEW programs
    Assist in the general maintenance, upkeep, and improvement in the lab and its capabilities by ensuring that the systems and equipment are functioning properly
    Ensure proper safeguards are established and maintenance performed for all equipment required for purposes of testing and testing support
    Desired Software: LabVIEW experience required. Matlab
    Required Education & Experience:
    Bachelor’s Degree in Mechanical or Aerospace Engineering or any specialized equivalent from an accredited university or college preferred. Comparable experience in test of comparable equipment considered
    Position: Contract 12 months
    Location: Dayton Ohio

    Employment Criteria: U.S. Citizenship is required by law or government contract for this position. This position includes access or potential access to ITAR technical data. Therefore, candidates will need to qualify as a US Person which is defined as a US Citizen, a Permanent Resident who does not work for a foreign company/foreign government/foreign governmental agency or organization, or a political asylee in compliance with International Traffic in Arms Regulations.
    Employment Statement: Ingenium Technologies is an equal opportunity employer and does not discriminate on the basis of race, color, religion, sex, age, national origin, disability, veteran status, sexual orientation or any other classification protected by federal, state or local law. Proof of eligibility for employment will be required upon employment.
    Due to the requirements of the Customer, No Visa sponsorship is available.
     
    Job Number: 70071
    Job Location: Rockford, IL Illinois
    Rate: $38/hr.
    Per Diem: possible
    Overtime: possible
    Duration: 12 mos
    Start Date: 2 weeks
    Input Date: 11/14/2020
    Firm Name: INGENIUM TECHNOLOGY
    Attention: David Johnson
    Address: 4216 MARAY DR UNIT A1
    City, State: ROCKFORD, IL 61107
    Phone: 815/315-9273
    Fax Phone: 815/399-8804
    Website: www.ingeniumtech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Test Engineer I

    Description:
    DUTIES:

    � Design, develop, deploy, troubleshoot and upgrade Automated Test Equipment (ATE) used in testing PCBA�s, sub-systems and systems. This position requires LabView / TestStand experience.

    � Develop test plans and strategies.

    � Analyze, process and format test results.

    � Independently drive for results and consistently meet deliverables on projects with aggressive timelines. Work with diverse teams across multiple disciplines.

    � Provide feedback to product design team to improve testability or design.

    � Excellent problem resolution, judgment & decision making skills.

    � Ability to generate estimates based on different levels of specifications at different life cycle stages of a project.


    QUALIFICATIONS:

    � Electrical Engineering degree or equivalent.

    � Experienced in LabView / TestStand programming (C# experience a plus).

    � 5+ years� experience in development of test solutions.

    � Knowledge of engineering disciplines including mechanical & electrical design, material properties and test instrumentation.

    � Proficient in planning, writing and executing test specifications.

    � Demonstrated testing knowledge & ability to use latest testing technology and standards.

    � Excellent oral and written communications skills.

    � RF test experience a plus.
     
    Job Location: Simi Valley, CA
    Rate: Open
    Duration: 6-9 month contract
    Start Date: Immediate
    Input Date: 11/14/2020
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Sidney Williams
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Test Equipment Project Engineer / experience in the design, analysis, and development of complex electrohydraulic, electromechanical, or electropneumatic servomechanisms CA

    Description:
    Job Title: Test Equipment Project Engineer
    Job Number: 154641/4192
    Location: Torrance, CA
    Compensation: DOE
    Assignment Length: 6 month contract

    Description:

    The functional expertise required for this Sr. Project Engineering Position is primarily in the field of Electronics Engineering with significant experience required in the areas of position control and power electronics and project management.

    The Senior Project Engineer is a primary motivator and contributor to the analysis, conceptual design, development, and testing of complex control test equipment used on military, commercial and NASA vehicles and equipment. Most new applications require a special, tailored design, even though adaptation of existing designs always should be considered where appropriate. The incumbent will operate either independently or as part of a design/development team, which includes other Department engineers. His/Her primary concerns are system or component performance and integration, both being achieved within budget and prescribed schedules. The incumbent will coordinate the work of drafters, technicians, designers, analysts, manufacturing engineers and others who assist in specific assignments.

    The Sr. Project Engineer is responsible for communicating with the involved Division support personnel, keeping them informed of progress and educating them on the operation and performance of the design. He/She must frequently solicit their aid and support to achieve difficult schedule objectives.
    The incumbent's responsibilities may include the direct supervision of up to four subordinate engineers and/or project or product-engineering technicians. This would include setting their workload and priorities, counseling and conducting performance appraisals.

    Since this individual will often be seen by customers as the responsible technical representative of the company, he/she must be able to communicate fluently to a wide variety of audiences. He/She will be required to travel frequently and organize and make presentations to customers.

    To achieve the position of Senior Project Engineer, an individual will have a BS degree in Engineering, probably an advanced degree, with a depth of understanding achieved through experience in the design, analysis, and development of complex electrohydraulic, electromechanical, or electropneumatic servomechanisms. In addition, he/she must have a proven record of successful development programs working as a part of a project team.
    Essential job functions:
    Required skills:
    Scope:
    Education: A Bachelor's Degree Mechanical Engineering

    Other Requirements
    Please note on the submittal if the candidate is interested in a Full-Time or Contract position.
     
    Job Number: MB-4192
    Job Location: Torrance, CA
    Duration: 6 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Tool Design in Palmdale, CA #0258AS

    Description:
    Recruiter to contact: Adam Salazar
    Job title: Tool Design
    Location: Palmdale, CA
    Compensation: DOE
    Assignment Length: 12 month contract
    Security Clearance: Secret (Prime Contract:, Can start w/o clearance: No, Interim Clearance Sufficient: Yes) Non exempt
    1st shift

    Skill Matrix
    Skill Name Description Level (1-5, 5 being the highest)
    1 2 3 4 5 Years Mandatory(Yes/No)
    Tool Engineer 11 Years + Yes

    Description:
    • Candidate will be responsible for the design, maintenance, and repair of standard tools for the Palmdale site.

    • Responsible for working with Tool Design and Engineering personnel on producibility issues related to standard tools.

    • Individual must have knowledge of pneumatic tools, powerfeed motors, drilling, grinding, machining, and fastener installation.

    • Responsible for evaluating ergonomic tooling.

    • He/she will be required to create quick solutions to manufacturing problems and modify standard tools to fit unique area/program requirements.

    • Responsible for providing tools on startup programs to include cutting tools, motors, fastener installation tooling and gauging.

    Skill/Experience/Education
    Mandatory:
    Working knowledge of the Standard Tools which includes any of the following: sheet metal, assembly tooling, hand tools, machine shop tools, sheet metal fabrication tools, plumbing cable/electrical tooling, and quality control tooling.

    -Knowledge and experience with any of the following: pneumatic tools, powerfeed motors, drilling, grinding, machining, and fastener installation.

    -Experience with either of the following CAD Software programs: Catia, SolidWorks, Or Pro/E -Must be a US Citizen. This position is located at a facility that requires special access.

    Desired:
    Manufacturing Floor experience
    -Ability to design and apply tooling concepts to repair and modify aircraft assemblies.
    -Ability to think out of the box and modify standard tools to fit unique requirements.
     
    Job Number: #0258AS
    Job Location: Palmdale, CA
    Rate: DOE
    Duration: 12 Months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Adam Salazar
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Tool Design in Palmdale, CA #0258AS

    Description:
    Recruiter to contact: Adam Salazar
    Job title: Tool Design
    Location: Palmdale, CA
    Compensation: DOE
    Assignment Length: 12 month contract
    Security Clearance: Secret (Prime Contract:, Can start w/o clearance: No, Interim Clearance Sufficient: Yes) Non exempt
    1st shift

    Skill Matrix
    Skill Name Description Level (1-5, 5 being the highest)
    1 2 3 4 5 Years Mandatory(Yes/No)
    Tool Engineer 11 Years + Yes

    Description:
    • Candidate will be responsible for the design, maintenance, and repair of standard tools for the Palmdale site.

    • Responsible for working with Tool Design and Engineering personnel on producibility issues related to standard tools.

    • Individual must have knowledge of pneumatic tools, powerfeed motors, drilling, grinding, machining, and fastener installation.

    • Responsible for evaluating ergonomic tooling.

    • He/she will be required to create quick solutions to manufacturing problems and modify standard tools to fit unique area/program requirements.

    • Responsible for providing tools on startup programs to include cutting tools, motors, fastener installation tooling and gauging.

    Skill/Experience/Education
    Mandatory:
    Working knowledge of the Standard Tools which includes any of the following: sheet metal, assembly tooling, hand tools, machine shop tools, sheet metal fabrication tools, plumbing cable/electrical tooling, and quality control tooling.

    -Knowledge and experience with any of the following: pneumatic tools, powerfeed motors, drilling, grinding, machining, and fastener installation.

    -Experience with either of the following CAD Software programs: Catia, SolidWorks, Or Pro/E -Must be a US Citizen. This position is located at a facility that requires special access.

    Desired:
    Manufacturing Floor experience
    -Ability to design and apply tooling concepts to repair and modify aircraft assemblies.
    -Ability to think out of the box and modify standard tools to fit unique requirements.
     
    Job Number: #0258AS
    Job Location: Palmdale, CA
    Rate: DOE
    Duration: 12 Months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Adam Salazar
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Tool Design with active secret / Catia, SolidWorks, Or Pro/E CA

    Description:
    Lockheed Martin Aero 0258
    Job title: Tool Design
    Job Number: 158189
    Location: Palmdale, CA
    Compensation: 50-70/hr(DOE)
    Assignment Length: 12 month contract
    Security Clearance Secret (Prime Contract:, Can start w/o clearance:No, Interim Clearance Sufficient:Yes)
    Non exempt
    1st shift

    Description:

    Candidate will be responsible for the design, maintenance, and repair of standard tools for the Palmdale site. Responsible for working with Tool Design and Engineering personnel on producibility issues related to standard tools. Individual must have knowledge of pneumatic tools, powerfeed motors, drilling, grinding, machining, and fastener installation. Responsible for evaluating ergonomic tooling. He/she will be required to create quick solutions to manufacturing problems and modify standard tools to fit unique area/program requirements. Responsible for providing tools on startup programs to include cutting tools, motors, fastener installation tooling and gauging.

    Skill/Experience/Education
    Mandatory:

    Working knowledge of the Standard Tools which includes any of the following: sheet metal, assembly tooling, hand tools, machine shop tools, sheet metal fabrication tools, plumbing cable/electrical tooling, and quality control tooling. -Knowledge and experience with any of the following: pneumatic tools, powerfeed motors, drilling, grinding, machining, and fastener installation. -Experience with either of the following CAD Software programs: Catia, SolidWorks, Or Pro/E -Must be a US Citizen. This position is located at a facility that requires special access.
    Desired:

    Manufacturing Floor experience -Ability to design and apply tooling concepts to repair and modify aircraft assemblies. -Ability to think out of the box and modify standard tools to fit unique requirements.

    Skill Matrix
    Skill Name Description Level (1-5, 5 being the highest)
    1 2 3 4 5 Years Mandatory(Yes/No)
    Tool Engineer 11 Years + Yes
     
    Job Number: SW-0258
    Job Location: Palmdale, CA
    Rate: 50-70/hr DOE
    Duration: 12 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Tool Designers - Active Secret

    Description:
    **Must have Active Secret Clearance
    Experience with either of the following CAD Software programs: Catia, SolidWorks, Or Pro/E
    Candidate will be responsible for the design, maintenance, and repair of standard tools.
    Working knowledge of the Standard Tools which includes any of the following: sheet metal, assembly tooling, hand tools, machine shop tools, sheet metal fabrication tools, plumbing cable/electrical tooling, and quality control tooling.
     
    Job Number: Lock-CA
    Job Location: Palmdale, CA
    Rate: $50.00-$65.00/hour
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PDS TECH COMMERCIAL, INC
    Attention: Mary Ann McCarthy
    Address: 1215 FERN RIDGE PKWY STE 231
    City, State: ST LOUIS, MO 63141
    Phone: 314/628-9143
    800 Phone: 800/472-3737
    Fax Phone: 314/628-9485
    Website: www.pdstech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Utility Workers - Ayer, MA

    Description:
    STS AeroStaff Services is currently hiring Utility Workers for open positions in Ayer, Massachusetts.

    Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

    Job Purpose:

    Responsible for performing a variety of basic entry level duties and tasks, and cross trained to function within all areas of the manufacturing department.

    Job Duties:

    • Builds panels according to print.
    • Operates and sets-up resin weighing and mixing application.
    • Inspecting and packing panels.
    • Drill/Grind composite of aluminum material.
    • Logs supporting documentation.
    • Ability to lift 50 lb panels.
    • Use power and measuring tools.
    • Uses solvents.
    • Performs other tasks as directed by supervision.
    • Follows prescribed safety rules and regulations and maintains quality standards.
    • Other duties as assigned by supervisor.

    Qualifications:

    • High school diploma or GED.
    • One year related experience.
    • Strong mechanical assembly background preferred.
    • Ability to read drawings and operate power and hand tools preferred.

    Benefits:

    STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

    We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

    Thanks for taking the time, and we look forward to hearing from you soon.
     
    Job Number: 37289
    Job Location: Ayer, MA
    Rate: DOE
    Per Diem: No
    Overtime: Possible
    Duration: Temp
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STS AEROSTAFF SERVICES
    Attention: STS AeroStaff Services
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 800/800-2400
    Website: www.stsaviationgroup.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Wire Design & Install Engineer 3

    Description:
    787 WIRE DESIGN SUPPORT NEEDED!!!!

    Please call or email Holly Herrera at 253-455-3711 or hherrera@iconma.com.


    Wire Design & Install Engineer 3

    Location: North Charleston, SC
    Duration: 1 year

    Job Description:
    Develops and maintains cable/wire harness detail and assembly designs. Analyzes results and performs design reviews. Develops and maintains electrical product detail, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry, antennas).Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Documents processes, specifications and procedures that support the design and manufacture of electrical commodities. Develops basic statements of work. Participates in technical review of supplier capabilities to facilitate source selection. Analyzes functional and physical input to assure development of complete integrated design. Works under general direction.

    Education / Experience:
    Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

    Skill Code:
    679-Electrical/Electronic Installa
     
    Job Number: 24328-1
    Job Location: North Charleston, SC
    Rate: 50.00
    Per Diem: Yes
    Overtime: Possible
    Duration: 12 months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: ICONMA LLC
    Attention: Holly Herrera
    Address: 859 STEPHENSON HWY
    City, State: TROY, MI 48083
    Phone: 843/955-9221
    Website: www.iconma.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Wire Design & Install Engineer 3

    Description:
    Please call or email Holly Herrera at 253-455-3711 or hherrera@iconma.com

    Wire Design & Install Engineer 3
    Location: North Charleston, SC
    Duration: 12 months

    Job Description:
    Develops and maintains cable/wire harness detail and assembly designs. Analyzes results and performs design reviews. Develops and maintains electrical product detail, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry, antennas).Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Documents processes, specifications and procedures that support the design and manufacture of electrical commodities. Develops basic statements of work. Participates in technical review of supplier capabilities to facilitate source selection. Analyzes functional and physical input to assure development of complete integrated design. Works under general direction.

    Education / Experience:
    Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

    Additional Comments: Candidate must be flexible to support BSC production requirements.

    Skill Code: 679-Electrical/Electronic Installa
     
    Job Number: 23342-1
    Job Location: North Charleston, SC
    Per Diem: Yes
    Duration: 12 months
    Input Date: 11/14/2020
    Firm Name: ICONMA LLC
    Attention: Holly Herrera
    Address: 859 STEPHENSON HWY
    City, State: TROY, MI 48083
    Phone: 843/955-9221
    Website: www.iconma.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Wire Design & Install Engineer 4

    Description:
    MULTIPLE OPENINGS FOR 787 WIRE DESIGN!!!!

    Please call or email Holly Herrera at 253-455-3711 or hherrera@iconma.com.

    Wire Design & Install Engineer 4

    Location: North Charleston, SC
    Duration: 12 months

    Description:
    Develops and maintains cable/wire harness detail and assembly designs. Analyzes results and performs design reviews. Leads the team to analyze results and performs design reviews. Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Documents processes, specifications and procedures that support the design and manufacture of electrical commodities. Develops complex statements of work, metrics, schedules and budgets. Performs technical review of supplier capabilities to facilitate source selection. Works under minimal direction.

    Education / Experience:
    Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

    Skill Code:
    679-Electrical/Electronic Installa

    Additional Information:
    Software: CATIA V5, ENOVIA

    Skill set:
    Wire installation, equipment installation, part design, and project management skills.

    Skills
    Category Name Required Level
    Areas of Expertise Project Management Yes Advanced
    Software Skills CATIA V5 Yes Advanced
    Software Skills ENOVIA Yes Advanced
     
    Job Number: 24330-1
    Job Location: North Charleston, SC
    Rate: 60.00
    Per Diem: Yes
    Overtime: Possible
    Duration: 12 months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: ICONMA LLC
    Attention: Holly Herrera
    Address: 859 STEPHENSON HWY
    City, State: TROY, MI 48083
    Phone: 843/955-9221
    Website: www.iconma.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Wire Design & Install Engineer 4

    Description:
    Please call or email Holly Herrera at 253-455-3711 or hherrera@iconma.com

    Wire Design & Install Engineer 4
    3 month duration


    Develops and maintains cable/wire harness detail and assembly designs. Analyzes results and performs design reviews. Leads the team to analyze results and performs design reviews. Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Documents processes, specifications and procedures that support the design and manufacture of electrical commodities. Develops complex statements of work, metrics, schedules and budgets. Performs technical review of supplier capabilities to facilitate source selection. Works under minimal direction.

    Additionally...
    _Aerospace experience is desired, but not required.
    _Automotive wire harness routing / MBD experience will be considered.
    _Proven Advanced CATIA V5. Resumes must show in a prominent section the CATIA V5 experience.
    _Proven Advanced Teamcenter(IPDM)
    _Proven Advanced MBD (Model Base Definition).
    _Required recent experience (within the last year) in designing, developing, maintaining and releasing wire harness drawings and 3D Model based definition data packages using CATIA V5, the electrical workbench, and Teamcenter.
     
    Job Number: 23594-1
    Job Location: Ridley Park, PA
    Per Diem: YES
    Duration: 3 months
    Input Date: 11/14/2020
    Firm Name: ICONMA LLC
    Attention: Holly Herrera
    Address: 859 STEPHENSON HWY
    City, State: TROY, MI 48083
    Phone: 843/955-9221
    Website: www.iconma.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Wire Design & Installation Engineer III (MO) - UNIGRAPHICS

    Description:
    Develop aircraft avionics system installations, concepts and designs. The primary responsibility will be to participate as a member of the Equipment Installation Team in the execution and management of the mechanical design, production, integration, installation and support of all equipment and materials into the F-15 program. As the Equipment Installation Team is shared, the team also performs similar duties (including retrofit) for the F/A-18 and EA-18 production programs as well as the AV-8B and T-45. This position requires interaction with other Air Vehicle & Mission Systems teams. The individual will be responsible for developing and maintaining equipment product detail and creating assembly & installation designs (e.g. equipment trays, racks, mounts, shelves, electrical panel assemblies and antenna). Will follow established processes, specifications and procedures that support the design and manufacture of mechanical commodities. This individual will be accountable for meeting the cost, schedule, quality and performance to plan metrics established by the Team Leader.
    Applicant must have superior Unigraphics skills and good communication, analytical, and organizational skills. Moderate proficiency with Microsoft Office applications such as Word, Excel and PowerPoint is required.

    Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.
     
    Job Number: EEmo
    Job Location: Berkeley, MO
    Rate: up to $45/hour
    Per Diem: YES
    Overtime: Possible
    Duration: 6+ Months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INNOVA SOLUTIONS, INC
    Attention: Janice Plattner
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.innovasolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Wire Design & Installation Engineer III/IV (SC)

    Description:
    Develops and maintains cable/wire harness detail and assembly designs. Analyzes results and performs design reviews. Leads the team to analyze results and performs design reviews. Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Documents processes, specifications and procedures that support the design and manufacture of electrical commodities. Develops complex statements of work, metrics, schedules and budgets. Performs technical review of supplier capabilities to facilitate source selection.

    Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
     
    Job Number: EEsc
    Job Location: Charleston, SC
    Rate: OPEN
    Per Diem: YES
    Overtime: Possible
    Duration: 12+ Months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INNOVA SOLUTIONS, INC
    Attention: Janice Plattner
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.innovasolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Wire Design & Installation Engineer IV (PA)

    Description:
    SEVERAL OPENINGS

    Develops and maintains cable/wire harness detail and assembly designs. Analyzes results and performs design reviews. Leads the team to analyze results and performs design reviews. Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Documents processes, specifications and procedures that support the design and manufacture of electrical commodities. Develops complex statements of work, metrics, schedules and budgets. Performs technical review of supplier capabilities to facilitate source selection. Works under minimal direction.

    Additionally...
    _Aerospace experience is desired, but not required.
    _Automotive wire harness routing / MBD experience will be considered.
    _Proven Advanced CATIA V5. Resumes must show in a prominent section the CATIA V5 experience.
    _Proven Advanced Teamcenter(IPDM)
    _Proven Advanced MBD (Model Base Definition).
    _Required recent experience (within the last year) in designing, developing, maintaining and releasing wire harness drawings and 3D Model based definition data packages using CATIA V5, the electrical workbench, and Teamcenter.

    Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
    Additionally, a Bachelor of Science degree in an Engineering discipline from an ABET accredited school is required. Candidates with Electrical Engineering Technology or AA degrees are not qualified—will not be considered.
     
    Job Number: EEpa
    Job Location: Ridley Park, PA
    Rate: up to $60/hour
    Per Diem: YES
    Overtime: Possible
    Duration: 3+ months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INNOVA SOLUTIONS, INC
    Attention: Janice Plattner
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.innovasolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Wire Design and Install Engineer 3

    Description:
    Level 3-Job Description:

    Develops and maintains cable/wire harness detail and assembly designs. Analyzes results and performs design reviews. Develops and maintains electrical product detail, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry, antennas).Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Documents processes, specifications and procedures that support the design and manufacture of electrical commodities. Develops basic statements of work. Participates in technical review of supplier capabilities to facilitate source selection. Analyzes functional and physical input to assure development of complete integrated design. Works under general direction.

    Education / Experience :

    Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.
     
    Job Number: 36619
    Job Location: Charleston, SC
    Rate: Open
    Per Diem: Split
    Overtime: Possible
    Duration: 12 mos
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: APOLLO PROFESSIONAL SOLUTIONS
    Attention: Erica Price
    Address: WESTRIDGE OFFICE PARK
    2646 HIGHWAY 109 STE 207

    City, State: WILDWOOD, MO 63040
    Phone: 636/438-0312
    800 Phone: 866/277-3343
    Fax Phone: 636/220-8284
    Website: www.apollopros.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Wire Design and Install Engineer 4

    Description:
    Level 4-Job Description :

    Develops and maintains cable/wire harness detail and assembly designs. Analyzes results and performs design reviews. Leads the team to analyze results and performs design reviews. Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Documents processes, specifications and procedures that support the design and manufacture of electrical commodities. Develops complex statements of work, metrics, schedules and budgets. Performs technical review of supplier capabilities to facilitate source selection. Works under minimal direction.

    Education / Experience:

    Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
     
    Job Number: 36618
    Job Location: Charleston, SC
    Rate: Open
    Per Diem: Split
    Overtime: Possible
    Duration: 12 mos
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: APOLLO PROFESSIONAL SOLUTIONS
    Attention: Erica Price
    Address: WESTRIDGE OFFICE PARK
    2646 HIGHWAY 109 STE 207

    City, State: WILDWOOD, MO 63040
    Phone: 636/438-0312
    800 Phone: 866/277-3343
    Fax Phone: 636/220-8284
    Website: www.apollopros.com

    Back to Advanced Job Search