Job Search Results

794 listings were found that matched your search words: Keywords: Software ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2018/10/18 Thursday 02:34AM Pacific Time by ContractJobHunter. )

Listings 1 - 794

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2321 - PROPULSION SYSTEMS ENGINEER - cv. word doc only

Description:
Design and integration of the system;

Review of the design and documentation of all the aspects related to your system;

Checking for quality of the Supplier's analyses;

Validation and verification of system requirements;

Validation and verification of system performance through design reviews, analyses, rig and aircraft testing;

Definition, preparation and execution of qualification and certification tests;

Working with supplier in the investigation and resolution of test findings;

Preparation or review of qualification or certification reports;

Working with suppliers to establish complete system requirements and system interfaces;

Liaison with stress, loads, reliability, maintainability and safety (RM&S), simulation, customer and operations support departments;

Provide support to business units in Propulsion Control requirement definition, verification and validation, following ARP4754

Identify issues and obstacles, follow-up and communicate progress;

Prepare reports or presentations.

Bachelor degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of eight (8) years.

Possess very good knowledge in Propulsion Control Systems and their integration on the aircraft.

Background in design, integration, development and certification of Propulsion Systems.

Cognizant of the relevant Airworthiness Regulations and certification process.

Familiarity with Part 25 Regulations and certification requirements.

Flight testing/testing experience is an asset.

Have good oral and technical writing skills in English and French knowledge is an asset.

Motivated, self-starter, organized, autonomous and able to work under limited supervision

Team player and able to work with suppliers and customers.

Dynamic person with initiative, a strong sense of responsibility and good judgment

Have knowledge of MS Office software (essential).

Full flexibility is expected (may be on-call, shift-work, rotational work, weekends, odd hours, etc).

Must be able to travel to USA (Wichita) to support Flight testing and supplier reviews (if required).
 
Job Number: 2321
Job Location: Montreal, Canada
Rate: 58.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 01/11/2018
Last Updated: 05/18/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2376 - MRB STRESS ENGINEER - cv, word doc only

Description:
Support the Engineering, Production and Quality organizations;

Be responsible of the static strength calculation for the completion component using finite element and hand calculation.

Support the material selection and thickness for the different structure elements or validating the designer selection base on the stress analysis.

Prepare the official stress report in English for certification purposes.

Engage in engineering development work;

Sign engineering drawings and documentations;

Prepare Test Plans and approve Test Reports

Support various research and development projects

Bachelor Degree in Aerospace or Mechanical engineering.

Minimum of 5 years MRB experience.

Have experience including at least one of the following skills in the structural integrity qualification (loads, fatigue and damage tolerance) of airplane primary structural components.

Have experience in stress analysis and FEM.

Have practical knowledge and experience of Nastran/Patran

Have excellent knowledge of aircraft structure and system installation technical requirements.

Have practical knowledge and experience of Catia/Enovia V5.

Work under minimum supervision to perform a wide range of technical functions.

Have practical knowledge and experience in aircraft structure and completion components.

Are customer-oriented with innovative problem solving skills and you are organized.

Have good communication skills including good English and French writing and verbal skills.

Are a team player, working in a multidisciplinary team.

Good command of various software (MS Suite, Outlook, Acrobat, etc.).
 
Job Number: 2376
Job Location: Montreal, Canada
Rate: 58.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 24 Mths
Start Date: ASAP
Input Date: 04/06/2018
Last Updated: 04/26/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2379 - HYDRO-MECH. SYS. INTEGRATOR - cv, word doc only

Description:
Support the Client Mod-line in Montreal by leading all engineering related activities for a timely resolution to production line issues.

Witness system functional testing and conduct technical investigations on Hydro-Mechanical systems related issues, analyze and develop solutions/recommendations and reports. Disposition RFCs, RNCs, and Supplement 2s as required.

Review functional test requirements and ensure translation into mature functional tests

Track and ensure successful implementation of systems installations and modifications

Work with the product development team to assist with technical proposal activities, including preparation of written material and presentations. Recommend and review design changes

Develop good working relationships with various departments within BA and with all suppliers

Bachelor of Engineering Degree and eligibility for Professional Engineer registration. AME license is an asset.

Experience in providing engineering support to a Final Line/ Production.

Have 10-15 years' experience in aircraft Hydro-Mechanical systems (Fly-By-Wire & Control Surfaces, Wing High Lift, Hydraulics, Landing Gear, Brakes, etc).

Conversant with design, qualification and certification test requirements of Hydro-Mechanical systems.

Have flexibility to travel.

Are Familiar with Part 25 certification requirements and advisory material.

Possess strong integration skills, in both system partner management and system technical integration.

Are familiar with Microsoft Office software tools.

Have Strong communication skills, ability to work well in a multi-disciplinary team environment.
 
Job Number: 2379
Job Location: Canada
Rate: 61.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 04/06/2018
Last Updated: 06/04/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2386 - MECHANICAL STRESS ENGINEER - cv, word doc only

Description:
Checking technical drawings.

Stress Analyzing and write stress rapport for mechanical tools and equipment.

Sign and seal design drawings for mechanical tools and equipment (lifting devices, staging, etc.).

Communicate with other departments: methods, planning, production, etc.

Mechanical Engineering degree.

Experience between 5-10 years.

Member of OIQ.

Must have knowledge and experience of mechanical systems.
Experience in welding and CWB group.

Knowledge of design STD (CSA, ANSI, ISO, ASME, etc)

Experience in at least one of the following skills in the structural integrity qualification (loads, stress, fatigue and damage tolerance) of airplane components.

Knowledge of aircraft structure and system installation technical requirements ( TCCA, FAA & EASA ) is an asset.

Must have Experience of working with new design and must be able to demonstrate understanding of aircraft component load path and functions.

Must have experience using Patran and Nastran.

Must have working knowledge of Catia V5, finite element modeling and analysis.

Must have excellent communication skills.

Bilingual - French and English, spoken and written.

Must be computer literate and familiar with commonly used software ( MS Office ).
 
Job Number: 2386
Job Location: Mirabel, Canada
Rate: 55.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 04/11/2018
Last Updated: 06/04/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

Software / Systems Engineer 3

Description:
PDS Tech, Inc. is seeking a Systems Engineer for an open position in El Segundo, CA
  • Primary Responsibilities:

    - Develops and maintains code and integrates software components into a fully functional software system and assists

    with test procedures and documenting test results to ensure software system requirements are met.

    - Supports software project management.

    - Troubleshoots software issues and works under general supervision.

Qualifications 

This position requires the ability to obtain a US Security Clearance, for which the US Government requires US Citizenship.
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.



Basic Qualifications:

- 2+ years of performing server software development in Java.

- 2+ years of experience developing ground control software.

- 1+ years of experience with SQL Server databases.

- 1+ years of experience with validation testing.

- Experience with software integration.

- Experience with XML.

Preferred Qualifications:

- Experience with avionics control algorithms, hardware interfaces and I/O device drivers, networking, SQL and nonrelational

databases, web-based development.

- Java software development experience running in the JBoss / Wild-Fly service bus.

- Experience with Payload Command generation and Payload Telemetry processing.

- JUnit Test experience.

- Experience performing JAXB code development.

- Experience with TCP/IP data transfer.
 
Job Number: 1810081318
Job Location: El Segundo, CA
Duration: 10 months
Input Date: 02/09/2018
Last Updated: 10/17/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Phil Press
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002dl3hAAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
AVIONICS SYSTEMS ENGINEER

Description:
ENEA Software & Services, in partner with an Aerospace client, are looking to fill an immediate opening:

AVIONICS SYSTEMS ENGINEER
To work on a 6-9 month contract in Gig Harbor, WA
Responsibilities:
• Write requirements for the Systems Requirement Document (SYRD) and Mechanical Engineering Requirements Document (MERD).
• Write and execute tests (SBC based) for performing operational and functional tests and outputting pass/fail/data.
• Use of DOORS for requirements tracking and tracing.
• Produce FAA certification reports
• Participate in FAA Systems and Software (SR and SOI) reviews

Experience Requirements:
• Superior technical communication and writing skills with experience using requirement management tools, such as DOORS, Reqtify or equivalent.
• Bachelor’s degree in Engineering
• 7+ years of experience in requirements and/or testing.
• Embedded C/C++ Proficiency
• Individual must have a passion for aviation hardware and thrive in a fast paced environment
• Pilot background familiar with autopilots and other avionics for rotorcraft and fixed wing desired.
• FAA flight test engineering and data processing/analysis experience desired
• Hardware, Altium, DO-178B/C, ARP4754A, ARM Processor, I2C, RS-232/485, ARINC 429 familiarity desired.
 
Job Number: WW040718SYSHEL
Job Location: Gig Harbor, WA
Rate: DOE
Per Diem: YES
Overtime: YES
Duration: 9 MONTHS
Start Date: April 23, 2018
Input Date: 05/02/2018
Last Updated: 05/18/2018
Firm Name: ENEA SOFTWARE AND SERVICES
Attention: Walter Walonoski
Address: 2555 E CAMELBACK RD STE 280
City, State: PHOENIX, AZ 85016
Phone: 480/753-9200
Fax Phone: 480/753-6400
Website: www.enea.com/services/expertise

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer with active secret CA

Description:
Requirement# AERO-REQ-0775
Work Location Palmdale, CA
Work Week 9/80
Needed Date 03/28/2017
End Date 12/28/2017
Number of Resources 1
Security Clearance Secret (Prime Contract:P - 16, Can start w/o clearance:No, Interim Clearance Sufficient:No)

Title Aeronautical Engineer

Description
Contribute to aircraft design, configuration development, feasibility and risk analyses, and technology maturation plans from the Flight Control and Vehicle Management Systems (FC&VMS) perspective. Define, Develop, analyze and coordinate FC&VMS requirements with other flight sciences disciplines as well as ground and flight test, reliability & maintainability, system safety, and other personnel. Close coordination with the propulsion community is required for flight control and for ground testing. Develop models and simulations as needed for design and analysis. Perform trade studies and define preliminary requirements for VMS architecture components. Design mechanical and electronic interfaces to support integration and test. Define high level software requirements. Good oral and written communication skills are required as is the ability to flex and adapt in a fast-paced team environment. Complex organization and documentation skills are required. Candidate must possess an active SECRET clearance with 5 year re-investigation. Candidate must have significant Flight Controls and Flight Simulation experience.

Skill/Experience/Education
Mandatory:

Active SECRET Clearance with Background Investigation in last 5 years. Significant work experience with Flight Controls and Flight Simulation
Desired:

Bachelors Degree or above in an Engineering or Related field.


Interview Required Yes

Shift 1st Shift

OT Allowed Yes (OT Limitation: No)
Travel No
Non-Exempt

Rates
0-4 YrsPay Rate: 65.00 USD
5-8 YrsPay Rate: 70.00 USD
9+ YrsPay Rate: 75.00 USD
 
Job Number: JE-0775
Job Location: Palmdale, CA
Rate: 65-75/hr DOE
Per Diem: no
Duration: 9 months
Input Date: 04/18/2018
Last Updated: 04/18/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Structural Engineers - Melbourne, FL

Description:
STS AeroStaff Services is hiring Aircraft Structural Engineers in Melbourne, Florida.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Perform static, dynamic, and DaDT structural analyses of composite and metallic airframe structure, mechanical systems, and equipment, by hand and by using the automated methods and procedures approved for the program
• Ensure that designs meet program requirements and are the lightest, lowest cost, and highest quality products consistent with schedule and budget objectives
• The analyst may also be expected to derive non-flight applied loads, create, extract and distribute internal loads, and perform weight and stiffness optimization
• Tools utilized may include FEMAP, NX, and other software applications

Basic Qualifications:

• 9 Years’ with Bachelors in Science; 7 Years’ with Masters; 4 Years’ with PhD
• Secret Clearance required

Preferred Qualifications:

• Knowledge of FEMAP and NX CAE
• Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplishing them simultaneously, and comprehend and analyze complex problems and develop solutions
• Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplishing them simultaneously, and comprehend and analyze complex problems and develop solutions

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 42107
Job Location: Melbourne, FL
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 04/13/2018
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Applications Software Engineer

Description:
ENEA Software & Services, in partner with an Aerospace client, are looking to fill an immediate opening:

Applications Software Engineer
To work on a 6-9 month contract in Gig Harbor, WA

Responsibilities:
• Develop software solutions for Windows applications
• Responsible for writing production level code
• Responsible for clean modern UI design
• Application will interface with embedded system to enable calibration, maintenance, and data collection

Experience Requirements:
• BS degree in Computer Science plus at least 5 years of industry experience
• Self-driven, results oriented developer who strives to write clean, modular, well commented code
• Comprehensive understanding of data structures and algorithm topics.
• Experience with concurrency topics (i.e. asynchronous programming) is required.
• Applied mathematics understanding of geometry, trigonometry, and matrices is a plus.
• Willingness to work on a team and can work in a fluid, highly collaborative environment.
• Candidate must demonstrate a passion for writing software and building stuff.
 
Job Number: 585
Job Location: Gig Harbor, WA
Rate: DOE
Per Diem: YES
Overtime: YES
Duration: 1 year
Start Date: May 15, 2018
Input Date: 05/02/2018
Last Updated: 05/18/2018
Firm Name: ENEA SOFTWARE AND SERVICES
Attention: Walter Walonoski
Address: 2555 E CAMELBACK RD STE 280
City, State: PHOENIX, AZ 85016
Phone: 480/753-9200
Fax Phone: 480/753-6400
Website: www.enea.com/services/expertise

Automation Software Developers

Description:
OOP-object oriented programming, high speed
 
Job Location: Midwest
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: ccastro@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aviation Project Managers - Atlanta, GA

Description:
STS AeroStaff Services is hiring Aviation Project Managers in Atlanta, Georgia.
Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.
Job Duties:
Support daily operation of the SkyMiles loyalty program through managing and/or execution of various program changes, promotions, and partnership programs
Partner with the Loyalty IT team on a day-to-day basis to manage the overall operational needs ensuring performance metrics are met
Work with technology teams and business units to resolve system issues
Manage loyalty enhancements and capital projects and initiatives impacting multiple channels/applications, working with various parts of the business, including, but not limited to: Loyalty, Marketing, Reservations and Customer Care, eCommerce, Airport Customer Service, Sales, Revenue Management, Information Technology, and Alliances
Responsible for User Acceptance Testing (UAT) and evaluating software applications and systems related to Loyalty in an agile environment
Work closely with business teams to manage current products/processes
Drive the continuous improvement of processes and systems, and implement programs that will have sustained long-term value, improve the customer experience, reduce operating costs, and/or grow revenues
Perform analysis as necessary to ensure program is operating as expected, measure a program/promotion’s effectiveness, or troubleshoot issues
Plan, prepare and deliver presentations for leaders both inside and outside of Customer Engagement and Loyalty
Qualifications:
Bachelor's degree required, preferably in a quantitative or technical field
Minimum three years Project Management experience required
Experience with Project Management methodology is preferred
Airline experience required; experience with loyalty programs highly desired
Top-tier analytical skills required
Knowledge of airline alliance partnerships is a plus
Outstanding presentation and communication skills required; must be able to articulate complex processes to varied audiences
Strong relationship management skills and the ability to accomplish desired outcomes in a matrix environment are critical
Able to multi-task and perform at a high level of accuracy, meet deadlines, present a professional appearance, and excel under pressure
Must be a self-starter and have the ability to work independently as well as in a team environment
Demonstrated track record of integrity, intelligence and professional maturity
Benefits:
STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.
We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.
Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 41870
Job Location: Atlanta, GA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 04/04/2018
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Software Integration Engineer

Description:
Avionics Software Integration Engineer

Location: Pomona, CA
Pay Rate: $79/hr
Duration: 8 Month W2 Contract
Shift: First
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**
**NO RELOCATION COMPENSATION**

Description/Comment:
-Designs, develops, documents, tests and debugs control and diagnostic systems that contain logical and mathematical solutions.
-Conducts multidisciplinary research and collaborates with equipment designers in the planning, design, development, and utilization of electronic data processing systems for product and commercial software.
-Determines end user needs by analyzing system capabilities to resolve problems on program intent, output requirements and input data acquisition.
-Designs and implements build procedures that are used to support hardware and software product development and use.

Requirements:
-BS in Software Engineering or Software-related discipline
-10 years minimum experience as a software engineer in and Aerospace company
 
Job Number: 8935
Job Location: Pomona, CA
Rate: 79
Per Diem: No
Overtime: Possible
Duration: 8 months
Start Date: ASAP
Input Date: 04/16/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Systems Designers/DOORS

Description:
*Must have Engineering Degree & able to obtain security clearance
Avionics system design engineers to help define the requirements for vehicle health management solutions for commercial and military platforms. This software will monitor and assess aircraft fault data to provide flight deck and maintenance personnel with appropriate information for assessing the health of the aircraft. There will be both on-board (semi-real time to real time) and off-board functionality to this software. Experience in defining avionics systems requirements in DOORS is a requirement

Email resumes to: mmccarthy@pdstech.com
 
Job Number: BO-MO-Avionics-Doors
Job Location: St. Louis, MO
Rate: $67.00/hour
Per Diem: Possible
Overtime: Possible
Duration: Long Term
Start Date: ASAP
Input Date: 05/10/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Systems Engineer

Description:
Duties and Responsibilities:
Define, plan, and develop complex systems level requirements to support avionic systems
Perform systems level integration activities for aircraft avionic systems including: Control and Display Systems; Navigations Systems; Communication Systems; Surveillance Systems; and Cabin Management Systems
Interface with suppliers to ensure technical requirements are met to support aircraft development need dates
Provide technical assistance to production and customer service departments for support of system technical inquires and issue resolution
Perform system evaluation and analysis to verify the system design compliance with functional requirements
Coordinate with cross-functional team members to complete assignments/projects as defined and on schedule
Develop targeted system level enhancements to address customer feedback and product improvement initiatives
Conduct system lab testing and aircraft functional testing
Prepare presentations on avionics system design/development status
Support system analyses for avionic systems

Qualifications

Education, Work Experience, Certification and/or Licensure:
Bachelors’ degree in Engineering from a four year college or university; preferably in Electrical/Electronics Engineering or Aerospace Engineering
Minimum of 6 years to a maximum of 20 years’ experience working with integrated aircraft avionic systems in the areas of design engineering, system analysis, and system test

Knowledge, Skills and Abilities:
Working knowledge of design requirements of 14CFRPart 23
Proficiency in writing technical documentation and reports involving test data and analysis
Familiarity with avionics/electrical test laboratories and lab equipment
Working knowledge of System qualification requirements including DO-160E/F for environmental, DO-178B for software, and DO-254 for complex electronic hardware
Proficiency in Microsoft Office suite (Word, Excel, Project, PowerPoint is required)
Proficiency in requirements management tools such as DOORS
Proficiency in PLM Tools such as TeamCenter and SAP
Ability to handle complex work assignments
Ability to work independently and within a multi-functional team environment

The Structures Company is an AA/EOE.
 
Job Number: 189
Job Location: NC
Rate: $60.00
Per Diem: Yes
Overtime: Yes
Duration: 9+ Month
Start Date: ASAP
Input Date: 04/02/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

C# Interface Software Engineer- Top Secret Clearance, Clifton, NJ 07014

Description:
PDS Tech, Inc. is seeing Software Engineers with Top Secret DoD clearances in Clifton, NJ.  07014  Please send resume to Elisa Petersen at epetersen@pdstech.com or call at 316-448-0890.

Provide engineering services in command and control applications including requirement analysis, design, development, test, and sustainment for cutting-edge communications and information processing software systems as directed.  Provide monthly status reports of activities supported in subcontractor format. Travel as required.

Labor skills requirements:
  • TS/SCI clearance, active CI polygraph preferred
  • Bachelor’s degree in Computer Engineering, Computer Science, or related field with a minimum of 5 years of applicable experience
  • Minimum 3 years of direct software development experience with

(1) User interface software applications in C#, WPF, WCF, and Python working with Visual Studio .Net and the Windows application domain OR
 
  • Experience with various software architectures and platforms
  • Thorough understanding of software engineering principles, processes, and industry best practices with the ability to apply them in daily work
  • Ability to read, analyze and interpret requirements and common government specifications
  • Skilled in independently balancing a fair work load, managing priorities, maintaining a commitment to quality standards, overcoming obstacles, and achieving results
  • Experience implementing software applications involving the government customer
  • Organizational skills to work with a variety of people in different disciplines, working from multiple locations on tasks involving rapidly changing information
  • Strong communications skills both written and oral as well as presentation skills to communicate information effectively to both internal and external customers, managers and technical staff

Engineering support required for a six-month period of performance after receipt of order (ARO) with option to extend in 6-month increments.
 
 

 
Job Number: 1810081296
Job Location: Clifton, NJ
Duration: 6 months
Input Date: 02/12/2018
Last Updated: 10/17/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Elisa Petersen
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002dkuYAAQ&URLSource=cjhunter

C++ Embedded Systems Engineer - Top Secret Clearance, Clifton, NJ 07014

Description:
PDS Tech, Inc. is seeing Software Engineers with Top Secret DoD clearances in Clifton, NJ.  Please send resume to Elisa Petersen at epetersen@pdstech.com or call 316-448-0890.

Provide engineering services in command and control applications including requirement analysis, design, development, test, and sustainment for cutting-edge communications and information processing software systems as directed.  Provide monthly status reports of activities supported in subcontractor format. Travel as required.

Labor skills requirements:
  • TS/SCI clearance, active CI polygraph preferred
  • Bachelor’s degree in Computer Engineering, Computer Science, or related field with a minimum of 5 years of applicable experience
  • Minimum 3 years of direct software development experience with


(1.) Embedded systems in C++ working with Linux/Ubuntu operating systems. RTOS experience is preferred.

  • Experience with various software architectures and platforms
  • Thorough understanding of software engineering principles, processes, and industry best practices with the ability to apply them in daily work
  • Ability to read, analyze and interpret requirements and common government specifications
  • Skilled in independently balancing a fair work load, managing priorities, maintaining a commitment to quality standards, overcoming obstacles, and achieving results
  • Experience implementing software applications involving the government customer
  • Organizational skills to work with a variety of people in different disciplines, working from multiple locations on tasks involving rapidly changing information
  • Strong communications skills both written and oral as well as presentation skills to communicate information effectively to both internal and external customers, managers and technical staff

Engineering support required for a six-month period of performance after receipt of order (ARO) with option to extend in 6-month increments.
 
 

 
Job Number: 1810081277
Job Location: Clifton, NJ
Duration: 6 months
Input Date: 02/12/2018
Last Updated: 10/17/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Elisa Petersen
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002dkshAAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CAD Design Engineer

Description:
Project Overview:
Our global deployment of custom-designed machines has created one of the largest and most powerful computing infrastructures in existence: cutting-edge innovation on a huge scale. Our Technical Infrastructure teams design, build, and operate the software, hardware, computing platform, and networking technologies that power all of Google's services. As our operations continue to grow, its becoming ever more important to automated our infrastructure for deploying and operating at scale. We have developed a portfolio of automation projects that span manufacturing, supply chain, and datacenter operations.
We are looking for motivated professionals with experience designing complex automated systems in CAD. From component level detail to factory layout and optimization.
Overall Responsibilities:
You will work with our Datacenter Automation Systems team to define product specifications for robotics, autonomous vehicles, and material handling systems. Convert those specifications to virtual models in Solidworks, Autodesk, or ProE computer aided design software. Generate design details and schematic drawings from the virtual models for contracting from our supply base. Test and measure components and systems to ensure they meet design standards.
Top 3 Daily Responsibilities:
• Work with senior engineering staff to define product specifications,
• Use CAD software such as AutoCad,Inventor, Solidworks, or ProE to design building scale automation systems, components, robotic work cells
• Document design details and make schematic drawings for contracting components from suppliers.
Required Skills:
• B.S. ideally in Mechanical Engineering (or equivalent) or minimum 10+ years professional experience in CAD Design
• Without a degree, ideal candidate would be with trade certification in certified Solidworks professional (CSWP) or expert (CSWE)
• Solidworks, Autocad, Creo/ProE computer aided design systems
• Layout planning and optimization
• Geometric Dimensioning and Tolerancing
Nice to have skills/Not Required:
• Minimum 2+ years developing robotic, mechatronic, or material handling systems in a field related to manufacturing or logistics
• Certification: CSWA, CSWP, CSWE, CPPA, ACP
• Controls systems
• Statistical modeling
• Understanding Robot kinematics and Work Envelope
• Material control dynamics and principles
• Rate and systems throughput modeling
 
Job Number: 385909
Job Location: Kirkland, WA
Input Date: 04/10/2018
Firm Name: CDI CORPORATION
Attention: Jonathan Oleson
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Civil Engineer

Description:
Seeking a motivated civil engineer. The primary task of this role will be to coordinate all phases of infrastructure construction projects. Knowledge of the design life cycle process from requirements definition, permitting, project construction, and project sign-off is a plus.

• Supports review of infrastructure plans and procedures to ensure compliance with federal, state, and municipal requirements & regulations
• Supports the creation of project buy-off requirements
• Acts as general contractor for various infrastructure projects
• Confers with management, engineering, and other staff regarding manufacturing capabilities, production schedules, and other considerations to facilitate project completion


Requirements
• B.S. degree in civil engineering or mechanical engineering is required
• Current professional engineering license in the State of California or other state with reciprocity
• Working knowledge of California commercial building codes and ordinances
• At least 5 years of relevant industry experience
• Experience with AutoCAD or SolidWorks design software is preferred
• Excellent verbal and written communication, excellent computer skills including Microsoft Word, Excel, and PowerPoint
• Applicants must be U.S. persons as defined by the ITAR (22 CFR §120.15)
• Strong team player and ability to work independently with excellent organizational and problem-solving skills

The Structures Company is an AA/EOE.
 
Job Number: 190
Job Location: CA
Per Diem: yes
Overtime: possible
Duration: 5-7 Months - Possibly Longer
Start Date: April
Input Date: 04/05/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Communication & Network Systems Design & Analysis Engineers

Description:
Seeking Communication / Network System Design engineers within Avionics and Flight Controls Engineering organization of the Military Airlifter Program in Oklahoma City, OK. This is a senior level position in Avionics and Flight Controls xecution of systems and software testing to verify operational and functional requirements
Management of hardware/software suppliers' performance to ensure customer requirements are met
Supporting resolution of product integration & aircraft production issues.
*Must be able to obtain security clearance

Email resumes to: mmccarthy@pdstech.com
 
Job Number: BO-Network Design & Analysis
Job Location: Oklahoma City, OK
Rate: $75.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 6 Months+
Start Date: ASAP
Input Date: 04/09/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Structural Design Engineer

Description:
Job Description
Perform preliminary and detail design of metallic and composite structure, including initial sizing of joints, structure layout and design for manufacturability.
Create 3D/2D definition of parts, assemblies and installations.
CATIA V5, Composites workbench is a plus.
Establish manufacturing tolerances for production of structural components using GD&T.
Participate in the Engineering definition review, approval and release process
Support the review of manufacturing plans and procedures to ensure compliance with design requirements
Support the creation of structural test plans which will be used to verify manufacturing processes meet design intent and requirements
Works with Industrial Design team to develop conceptual designs for cabin interior
Develops rapid prototypes for evaluation throughout design development process
Develops 3D CAD models and 2D engineering definition for detail parts, assemblies, and installations inside the SpaceShipTwo pressurized cabin
Establishes manufacturing tolerances for production of structural components
Develops and documents system requirements and interface constraints for components
Coordinates with Analysis and Testing departments to ensure component performance in flight environments
Supports test definition to verify that components and manufacturing processes meet design intent and engineering requirements
Participates in the review, approval, and release process of engineering definition
Supports creation and review of manufacturing plans to ensure compliance with design requirements and company processes.
Supports components throughout full lifecycle from prototype to final acceptance as well as modifications and repairs after installation
Uses engineering judgment to evaluate manufacturing issues and disposition nonconformance reports (NCR)

Educational Requirements
Bachelor’s degree from an accredited institution, with a concentration in Aeronautical and Astronautical, Aerospace, or Mechanical Engineering

· 3 years or more experience design engineering for aerospace composite fabrication and assembly processes
· Proficient with CATIA V5
· Required Workbenches: Part Design, Assembly Design, Sketcher, Drafting, Wireframe and Surface Design
· Desired Workbenches: Generative Shape Design (GSD), Composites (CPD) Experience using GD&T and ASME Y14.5M-1994 drafting standards
· Knowledge of manufacturing methods for various materials (composite layup, metal machining, 3D printing, bonded assembly, mechanical assembly)
· Experience designing for aerospace environments desired
· Experience in the development of human spaceflight hardware desired
· Experience with Product Lifecycle Management (PLM) software and configuration management processes
· Excellent analytical and decision-making skills
· Excellent verbal and written communication skills. Excellent organizational and time-management skills Strong team player.

· Proficient in Microsoft Office: Word, Excel, PowerPoint, Outlook Applicants must be U.S. persons as defined by the ITAR (22 CFR §120.15)

Required Skills:
Microsoft Office, CATIA, Structural design of primary and secondary composite aircraft structure.

The Structures Company is an AA/EOE.
 
Job Number: 73
Job Location: CA
Duration: 6-9 Months
Start Date: ASAP
Input Date: 04/18/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Configuration Management Analyst CA

Description:
8107462
Job Title: Configuration Management Analyst

Number of Positions: 1

Remaining Positions: 1

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



Note: Data references are engineering data unless otherwise stated. The main CM Tool (PLM) is Windchill



-Review documents (drawings, specifications, supporting engineering data) utilizing configuration management requirements and techniques; including identification, controls and status accounting, for release within company PLM system (Windchill). Includes validation of CAD data, Engineering Bills of Material (EBOM) and attribute data


-Validate Manufacturing Bills of Material (EBOM, MBOM) against released design documentation for accuracy.

Skills:
-Understanding and application of Configuration and Data Management principles, concepts, and practices helpful.



-Knowledge of information technology systems, concepts, hardware and software programs helpful.



-Experience with Windchill Product Lifecycle Management tool helpful.



Desired:

-Drawing Release

-Bills of Material (EBOM/MBOM)

-Familiarity with Oracle ERP

Education:
-A Bachelor's degree in an appropriate discipline and two (2) years of directly related experience, or a combination of education and experience.

Skills:
Required
CONFIGURATION MANAGEMENTORACLEMBOMWINDCHILL
Additional

State/Province: California
City/Town: Rancho Cordova

Start Date: 04/30/2018 Hours Per Week: 40.00
Est. End Date: 08/31/2018 Hours Per Day: 8.00
Schedule Notes: 9/80 schedule. OT possible. Days Per Week: 5.00
 
Job Number: MB-A8107462
Job Location: Rancho Cordova, CA
Rate: 33/hr max
Per Diem: NO
Duration: 4 months +
Input Date: 06/20/2018
Last Updated: 06/25/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract -Prod Painter I

Description:
Unique Skills:
None

Education and Experience Requirements:
High School diploma/GED. Must have knowledge of tools, equipment, and materials used in painting trade and methods of mixing paint colors. One (1) year experience in painting/paint preparation or related experience.

Position Purpose:
Under supervision, effectively prepare and paint major sub-assemblies and other parts of aircraft in production made according to specifications and schedule requirements.

Principal Duties and Responsibilities:

Essential Functions: 1. Mix paints, primers, etc. according to specifications. 2. Paint major assemblies (including metal, fiberglass and composite material), detail parts, and apparatus related to ground support. 3. Strip paint and prepares surfaces as required. 4. Perform miscellaneous paint operations and applies decals. 5. Maintain a neat and orderly work area, supports the company 5S and Lean Initiative Programs and complies with all safety regulations. 6. Demonstrate Manufacturing competencies in the Employee Effectiveness Review.

Additional Functions: 1. Perform other duties as assigned.

Other Requirements: 1. Proficiency in current personal computer based software. 2. Must be able to meet the physical requirements of the position. 3. Must be able to work any shift.
Languages Required (in addition to English): No Selection
 
Job Number: 130921
Job Location: Savannah, GA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 04/11/2018
Firm Name: INTERGEN GROUP
Attention: Maggie Lloyd
Address: 5051 PEACHTREE PKWY STE 200
City, State: PEACHTREE CORNERS, GA 30092
Phone: 678/318-1816
Fax Phone: 678/493-1467
Website: www.intergengroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Customer Service & Support Admins - Phoenix, AZ

Description:
Now Hiring Customer Service & Support Admins!

Overview:

STS AeroStaff Services is now offering Customer Service & Support Admin jobs in Phoenix, Arizona. To learn more, check out the following information.

Are you tired of working the same dead-end contract positions? If so, STS AeroStaff Services offers the best administrative jobs in Phoenix, Arizona; positions that will reward your skills with competitive compensation and benefits. When it comes to your career as a Customer Service & Support Admin, don’t just wing it. Let STS AeroStaff Services help you fly your career forward!

At this point in the post, you can read on, apply online or contact an STS Recruiter at 1-877-707-5767.

Essential Duties & Responsibilities:

• Provides friendly service to and maintains positive relationships with all internal and external Customers
• Works in a cooperative spirit to ensure the success of our Company
• Performs secretarial and administrative duties for Leadership and staff under minimal supervision
• Answers calls, relays and takes messages, transfers calls, provides assistance to callers, screens calls and places calls for management
• Maintains department personnel files and paperwork
• Organizes and maintains payroll file room and coordination of timely rotation of files to off-site storage facility
• Orders supplies using established Company vendors and ordering methods
• Opens, sorts, screens and responds to incoming mail
• Composes, types and edits correspondence
• Compiles data and prepares special reports; gathers and summarizes data
• Makes arrangements for meetings and luncheons as directed by the department Leadership Team
• Maintains appointment calendars for management
• Arranges travel and accommodations for management and staff
• Establishes meeting times, secures location and contacts attendees
• Establishes and maintains files and other information for reference and control purposes
• Prepares confidential paperwork regarding performance appraisals, promotions and other people-related issues for management
• Maintains invoice and budget files and assists in the compilation of variance reports
• Operates computer equipment utilizing word processing, spreadsheet, data base management and presentation software
• Some data entry may be required
• Operates copy machine, FAX equipment and other standard office equipment
• May perform other job duties as directed by Leadership
• Must be able to meet any physical ability requirements listed on this description
• May perform other job duties as directed by Employee's Leaders

Qualifications:

• High School diploma or equivalency required
• Previous analytical/technical experience preferred
• Must provide friendly service to and maintains positive relationships with all internal and external Customers
• Operation of multi-line telephone with courtesy and sufficient speed
• Ability to operation copy machine, FAX machine and other standard office equipment
• Open, sort and screen incoming mail
• Must master computer software applications such as Outlook, Quickbase, Microsoft Word, Excel, PowerPoint and Access
• Must have sufficient ability to handle and resolve office administration tasks
• Must be able to perform mathematical computations
• Must possess excellent organization skills including establishing and maintaining files for reference and control purposes
• Must work under tight time constraints including meeting unforeseen deadlines to accomplish assignments and projects
• Must be able to effectively communicate verbally, by telephone and face to face
• Must have ability to keyboard with sufficient speed and accuracy to meet the demands of the job
• Must be able to read documents, follow instructions, learn and understand office procedures
• Must compile data and prepare special reports
• Responsible for making arrangements for meetings and luncheons and handle travel arrangements as necessary
• Responsible for the payroll records for the entire Department, including Incentive Passes
• Must have ability or must gain ability to use SWEEP for ordering department supplies
• Must be able to work varying schedules and work weekends as required
• Must be able to work occasional overtime, as necessary
• Must be able to comply with Company attendance standards as described in established guidelines
• Must meet confidentiality expectations as to confidential, proprietary and sensitive Company information
• Must maintain a well-groomed appearance per Company appearance standards as described in established guidelines
• Must be a U.S. citizen or have authorization to work in the United States as defined by the Immigration Reform Act of 1986

Company Overview & Benefits:

STS AeroStaff Services works with the largest names in the aviation industry. We offer hundreds of career opportunities throughout the United States, and with more than two decades of experience, our aviation recruiters soar in their commitment to excellence and professionalism.

We proudly offer all qualifying candidates competitive rates, direct deposits, medical insurance, cash advances and referral bonuses. Have questions? Contact us today at 1-877-707-5767.
 
Job Number: 42040
Job Location: Phoenix, AZ
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 04/06/2018
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Cyber Security Systems Engineer - Secret Clearance

Description:
Job Description:
Senior Systems Security Engineer to provide product support for the USAF Cyber Resiliency Office for Weapon Systems (CROWS) in the area of Systems Security Engineering (SSE) and Cyber Resiliency.

The Senior Systems Security Engineer will be responsible for the following:
• Focus on ensuring cyber security and resiliency is incorporated in the weapons systems design process via the Systems Engineering (SE) process.
• Support development of SSE artifacts and acquisition templates for inclusion in SE processes.
• Assist in the development of a requirements construct to help USAF programs interpret and scope system security, acquisition security, and cybersecurity and resilience requirements.
• Leverage NIST security controls, FAA direction, and other inputs to inform system security requirements.
• Perform technical analyses, conduct research, and use technical management principles to assess impacts to DoD and USAF systems engineering and acquisition policies and processes; and provide recommendations for improvement.
The candidate selected should be experienced and successful at solving complex system integration and engineering issues, enjoy working in a dynamic, responsive, and collaborative environment, and dedicated to the success of our customers. Work location is at Wright-Patterson AFB in Dayton, OH and sit within AFLCMC/EZS CROWS LOA2 office.

Education/Experience:
A Bachelor's degree and fifteen (15) years of experience is required.

Knowledge, Skills and Abilities:
Candidate should have a foundational understanding of DoD weapon system acquisition and system Life Cycle Systems Engineering processes. Position requires technical background in development of weapons system/platform avionics and/or software. Position requires expertise and experience in systems security engineering in one or more security specialty areas, such as Cybersecurity, Cyber Resilience, Anti-Tamper protection, Supply Chain Risk Management, Software Assurance, and Hardware Assurance.
Other required skills include: Interviewing skills, to talk with individuals and groups about their needs and ask the right questions to surface essential requirements information; Listening skills, to understand what people say and to detect what they might be hesitant to say; Analytical skills, to critically evaluate the information gathered from multiple sources, reconcile conflicts, decompose high-level information into details, abstract up from low-level information to a more general understanding, distinguish presented user requests from the underlying true needs, and distinguish solution ideas from requirements; Facilitation skills, to lead requirements elicitation workshops; Observational skills, to validate data obtained via other techniques and expose new areas for elicitation; Writing skills, to communicate information effectively to customers, marketing, managers, and technical staff; Organizational skills, to work with the vast array of information gathered during elicitation and analysis and to cope with rapidly changing information; Interpersonal skills, to help negotiate priorities and to resolve conflicts among project stakeholders (such as customers, product management, and engineering).

PREFERRED SKILLS
Master's degree in Engineering with twenty (20) years of experience is preferred. Broad understanding of systems engineering; a broad understanding of security; a technology specific understanding (e.g., avionics development); and a domain specific understanding (e.g., aircraft, space systems).

The selected applicant should have knowledge of Air Force Assessment and Authorization (A&A) cybersecurity process and current DoD cyber security requirements.
 
Job Number: 18-12157
Job Location: Dayton, OH
Rate: 50-55
Per Diem: SPLIT
Overtime: YES
Duration: LT
Start Date: ASAP
Input Date: 03/27/2018
Last Updated: 04/10/2018
Firm Name: NESCO RESOURCE
Attention: Paul Chacon
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer 3

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Design and Analysis Engineer 3
(U.S. Citizenship Required*)
Huntington Beach, CA
2018-5801

Join a team where Engineering really matters! Our Global Services is seeking a design and analysis engineer 3 in Avionics and Flight Controls (AVFC) Engineering on the C-17 Military Airlifter Program. AVFC team members develop and test associated systems in a fast paced Agile engineering environment. You will research and integrate new technologies that support the world’s finest airlift aircraft. You will also have the opportunity to work with Air Force customers using the latest engineering techniques to design and test C-17 aircraft sensors, controls, communications, avionics, and flight systems.

Responsibilities:
• Develop electronic and electrical flight control system solutions
• Participate in modification projects for flight control hardware and software designs based on platform requirements
• Execute systems and software testing to verify operational and functional requirements
• Manage hardware/software suppliers' performance to ensure customer requirements are met
• Support resolution of product integration & field operation issues
• Research new technologies for potential application to C-17
• Develop solutions to technical problems of safety of flight scope and impact
• Apply solid engineering, scientific, and common sense principles in the context of organizational dynamics and real world cost & schedule targets
• Integrate into teams and collaborate with multiple engineering disciplines in solving moderately complex problems concerning fielded airborne avionics and flight control (AFC) systems, involving both hardware and software.
• Participate in full lifecycle projects to develop functional and interface requirements; design hardware, software and interface specifications; test and validate to ensure system designs meet operational and functional requirements; assist in monitoring supplier performance to ensure system integration and compliance with requirements
• Work with customers and their representatives to obtain feedback for product enhancements and corrective actions.

Qualification:
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.
• Degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-5801
Job Location: Huntington Beach, CA
Rate: Based on experience
Duration: 6 Months
Input Date: 04/11/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Carl May
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer 3

Description:
Seeking a Design and Analysis Engineer 3 located in Huntington Beach, CA 37

RESPONSIBILITIES:
Join a team where Engineering really matters! Client C-17 is seeking a design and analysis (level 3) engineer in Avionics and Flight Controls Engineering on the C-17 Military Airlifter Program in Long Beach/Huntington Beach, CA. Members of the C-17 Avionics & Flight controls (AVFC) team develop and test associated systems in a fast paced Agile engineering environment. Successful candidates will research and integrate new technologies that support the world's finest airlift aircraft. Candidates will have the opportunity to work with Air Force customers using the latest engineering techniques to design and test C-17 aircraft sensors, controls, communications, avionics, and flight systems.

Client, a new business unit from the customer services groups within the company's existing commercial airplanes and defense, space and security business units is a customer-focused, dedicated services business designed to drive greater value. This new organization draws on the best talent and experience from across the business and within the industry to build our services champion culture and create the leading services business.

Responsibilities
- Developing electronic and electrical flight control system solutions
- Participating in modification projects for flight control hardware and software designs based on platform requirements
- Executing systems and software testing to verify operational and functional requirements
- Managing hardware/software suppliers' performance to ensure customer requirements are met
- Supporting resolution of product integration & field operation issues
- Researching new technologies for potential application to C-17
- Developing solutions to technical problems of safety of flight scope and impact
- Applying solid engineering, scientific, and common sense principles in the context of organizational dynamics and real world cost & schedule targets
- Integrating into teams and collaborating with multiple engineering disciplines in solving moderately complex problems concerning fielded airborne avionics and flight control (AFC) systems, involving both hardware and software.
- Participate in full lifecycle projects to develop functional and interface requirements; design hardware, software and interface specifications; test and validate to ensure system designs meet operational and functional requirements; assist in monitoring supplier performance to ensure system integration and compliance with requirements
- Work with customers and their Client representatives to obtain feedback for product enhancements and corrective actions.

EDUCATION:
Accredited Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

WORK HOURS:
Full-Time/First Shift
7 AM - 4 PM
 
Job Number: 170090
Job Location: Huntington Beach, CA
Rate: $61.85-$68.75
Per Diem: Yes
Overtime: Yes
Duration: 6 mths
Start Date: ASAP
Input Date: 04/11/2018
Firm Name: CHIPTON ROSS
Attention: Melody Mullins
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer 4

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Design and Analysis Engineer 4
(U.S. Citizenship Required*)
Oklahoma City, OK
2018-5785

Join our C-17 Military Airlifter Program as senior-level Communication/Network System Design engineer within Avionics and Flight Controls Engineering organization. Working under the supervision of Lead Engineers, you will integrate into the team and collaborate with multiple engineering disciplines in the specification, test and support of airborne electronic subsystems including sensors, controls, communications, displays, and processors. You will participate in projects to solve issues and implement their solutions utilizing Agile methods and processes. Working with customers and their representatives, you will obtain feedback for product enhancements and corrective actions.

Responsibilities:
• Develop electronic and electrical system solutions
• Participate in modification projects for basic hardware and software designs based on platform requirements
• Execute systems and software testing to verify operational and functional requirements
• Manage hardware/software suppliers' performance to ensure customer requirements are met
• Support resolution of product integration & aircraft production issues
• Research new technologies for potential application to C-17
• Develop solutions to technical problems of limited scope and impact; apply solid engineering, scientific, and common sense principles in the context of organizational dynamics and real world cost & schedule targets.

Qualification:
• Required – Able to obtain clearance
• Possess technical and engineering skills already developed while attaining Science degree(s) and entry level work experience.
• Excellent communication skills (written and verbal) and the ability to work in a team environment within a complex organization is a must.
• Integrate into our Agile Development teams, where personal attributes that include ownership, responsibility, and commitment are a must.
• Interact professionally with customers, suppliers, field representatives, and fellow engineers.
• Dependable, innovative, an independent thinker
• Possess excellent & creative problem-solving skills.
• Demonstrates 'hands on' capabilities in class projects, previous work experience, or hobbies.
• Able to demonstrate, through past experience, ability to work independently, persevere, and generally 'find a way' when roadblocks are encountered.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience.
• Degree from ABET accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-5785
Job Location: Oklahoma City, OK
Rate: Based on experience
Duration: 6 Months
Input Date: 04/09/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: jobs@moseleytechnical.com
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer 4

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Design and Analysis Engineer 4
(U.S. Citizenship Required*)
Oklahoma City, OK
2018-5783

Responsibilities:
• C-17 Military Airlifter Program.
• Modify & integrate Ground Support software.

Qualification:
• Required – able to obtain a clearance.
• Familiarity with ATLAS, test equipment, LabWindows CVI.
• Able to troubleshoot electronics.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience.
• Degree from ABET accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-5783
Job Location: Oklahoma City, OK
Rate: Based on experience
Duration: 6 Months
Input Date: 04/09/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: jobs@moseleytechnical.com
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer 4 (Communication / Network System Design engineer)

Description:
Design and Analysis Engineer 4 (Communication / Network System Design engineer)

Location: Oklahoma City, OK
Duration: 6 months

Job Description:
Client is seeking Communication / Network System Design engineers within Avionics and Flight Controls Engineering organization of the C-17 Military Airlifter Program in Oklahoma City, OK. This is a senior level position in Avionics and Flight Controls Engineering organization of the C-17 Military Airlifter Program in Oklahoma City, OK. Working under the supervision of Lead Engineers, selected candidates will quickly integrate into the team and collaborate with multiple engineering disciplines in the specification, test and support of airborne electronic subsystems including sensors, controls, communications, displays, and processors. The candidate will participate in projects aimed at solving issues and implementing their solutions utilizing Agile methods and processes. The candidate will have the opportunity to work with customers and their client representatives to obtain feedback for product enhancements and corrective actions.

Tasks may include:
Development of electronic and electrical system solutions
Participation in modification projects for basic hardware and software designs based on platform requirements
Execution of systems and software testing to verify operational and functional requirements
Management of hardware/software suppliers' performance to ensure customer requirements are met
Supporting resolution of product integration & aircraft production issues
Researching new technologies for potential application to C-17
An ideal successful candidate possesses technical and engineering skills already developed while attaining his/her Science degree(s) and entry level work experience. Excellent communication skills (written and verbal) and the ability to work in a team environment within a complex organization is a must. The selected candidate will be tasked to develop solutions to technical problems of limited scope and impact; and to apply solid engineering, scientific, and common sense principles in the context of organizational dynamics and real world cost & schedule targets.

The selected candidate will integrate into our Agile Development teams, where personal attributes that include ownership, responsibility, and commitment are a must. The candidate will be expected to interact professionally with customers, suppliers, field representatives, and fellow engineers. The candidate must be dependable, innovative, an independent thinker, and possess excellent & creative problem solving skills. The candidate should have demonstrated 'hands on' capabilities in class projects and/or previous work experience or hobbies. The candidate should also be able to demonstrate through past experience his/her capability to work independently, persevere, and generally 'find a way' when roadblocks are encountered.

Education / Experience:
Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Skill Code:
668-Communication / Network System

If interested then please share updated resume at ravi@iconma.com
 
Job Number: 18-06014
Job Location: Oklahoma City, OK, OK
Input Date: 04/09/2018
Last Updated: 04/16/2018
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 1201 PACIFIC AVE STE 600
City, State: TACOMA, WA 98402
Phone: 253/213-2012
Website: www.iconma.com

Design and Analysis Engineer 4 - CA

Description:
Chipton-Ross is seeking 1 Design and Analysis Engineer 4's located in Huntington Beach, CA

RESPONSIBILITIES:
Seeking design and analysis engineers in Avionics and Flight Controls Engineering on the C-17 Military Airlifter Program. Candidate to perform Lab Test Equipment/systems Operations, Support & Maintenance, and develop Test Program software modification and integration.

EDUCATION:
Accredited Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

FULL TIME/FIRST SHIFT
WORK HOURS: 7:00 AM - 3:45 PM

 
Job Number: 168163
Job Location: Huntington Beach, CA
Rate: $DOE
Duration: 6 Months
Input Date: 01/25/2018
Last Updated: 10/17/2018
Firm Name: CHIPTON ROSS
Attention: Terry Jones
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: tjones@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer 5

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Design and Analysis Engineer 5
(U.S. Citizenship Required*)
Mesa, AZ
2018-5764

Responsibilities:
• As Avionics Systems Engineer, integrate avionics software/hardware on the Apache Area Weapon System (AWS).
• Complex avionics development activities including pursuing advanced technologies, performing trade studies, developing technical approaches, decomposition, flowdown and traceability of system and software requirements, and system/subsystem verification testing.
• The purpose of the work is to perform gun scoring and analysis.
• Member of a cross functional integrated product team.
• Coordinate closely with US Army and international customers to ensure implementation is responsive to requirements, using appropriate project integration methodologies, and project management practices.
• Work with customers to develop and document complex electronic and electrical system requirements.
• Analyze and translate requirements into system, hardware, and software designs and interface specifications.
• Test and validate to ensure system designs meet operational and functional requirements.
• Monitor supplier performance to ensure system integration and compliance with requirements.
• Solve problems concerning and provides other support of fielded hardware and software over the entire product lifecycle.
• Research specific technology advances for potential application to company business needs.

Qualification:
• Required – Active Secret clearance. Candidates without this clearance will not be considered.
• Able to design, develop, test and present complex electrical and networking systems that utilize sensor technology.
• Exposure to missile, gun, or rocket technology is highly desired.
• Control theory expertise desired.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's 14 or more years' experience, Master's with 12 or more years' experience or PhD with 9 or more years' experience.
• Degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-5764
Job Location: Mesa, AZ
Rate: Based on experience
Duration: 9 Months
Input Date: 04/03/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Theo Hawthorne
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Designer

Description:
* Looking for someone with SolidWorks Composer software exp (it’s a CAD Model animation software package)
* Although the emphasis is Mechanical Design, the ideal candidate should have some exposure to electrical design drawings as well.

Summary

The Designer will prepare rough sketches, with a focus on Mechanical Design and Drafting, by studying customer specifications and creating a picture of the system, components and/or parts to support sales and marketing.

Duties / Responsibilities:
> Applies standard design practices through the use of welding, machining, manufacturing and assembly drawing symbols, descriptions and call outs.
> Prepares final drawings by studying engineering sketches, specifications and supporting documents.
> Develops layouts of the system, sub-systems, and parts; identifying dimensions, angles, curvatures, tolerances and materials
> Maintains engineering data base by entering data and completing backups.
> Mechanical design of enclosures, test fixtures and detailed electronics packages utilizing SolidWorks modeling software; design components for various fabrication processes including milling, turning, injection molding and sheet metal forming.
> Creates designs with appropriate dimensions, tolerances and part finishes while considering manufacturing technology; generates fabrication/assembly drawings of components & assemblies using ASME Y14.5 standards
> Reverse engineer complex components and assemblies; contributes to team effort by accomplishing related tasks as needed.
> Develop / design of fabrication & assembly drawings of system components/assemblies
> Resolve discrepancies by collecting and analyzing information, conferring with engineers, vendors, technicians and clients
> Identify & verify specifications by examining engineering docs & performing calculations

Job Requirements / Experience:
> 7+ years’ work experience in computer aided drafting with an Associate’s Degree in Mechanical Design or equivalent technical school training; U.S. Citizen is required
> 3-D modeling, SolidWorks (preferred)
> Experience in mechanical design and layout preferably in specialized packaging solutions
> Must have good mathematical background to handle common calculations
> Experience with machine processes, mechanical fabrication, materials and assembly processes a plus
 
Job Number: 023_2018
Job Location: Elkridge, MD
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: Long-Term / Temp-to-Perm
Start Date: ASAP
Input Date: 10/15/2018
Last Updated: 10/16/2018
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark A Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Email: mludwig@globalams.us
Website: www.globalamericanstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Digital / FPGA Design Engineer CA

Description:
Request number: 5262
Date created: 03/28/2018
Job title: Digital/FPGA Design Engineer

Number of openings: 1

Position location: Torrance - CA
Employment type: Contract
OT exempt: No

Shift: 1st
Education Requirement: MS/MA

Minimum Years of Experience: 5
Maximum Hourly Pay Rate: 50
Start Date: 04/02/2018
Tentative End Date: 06/30/2018

Job Description
Function: As the Digital/FPGA Design Engineer, you will be responsible for designing, developing, modifying, and evaluating FPGA's and ASIC's that interface with electronics, electro-mechanical or mechanical components, assemblies or integrated circuitry for actuation systems or Avionics equipment. Includes new design, as well as modification activities that results in significant product enhancement. Activities encompass design, analysis, testing and process development using engineering principles and methods. Technical integrated circuits; and embedded software/firmware design. Designs will have emphasis on high reliability flight critical applications designed to DO254 Level A requirements.


Required skills:
· US Citizenship required. No Dual Citizenship.
· Bachelor of Science in Electronics Engineering
· Five or more years relevant experience
· High-speed digital logic circuit designs for Flight critical applications, Critical Timing analyses.
· Experience working on FPGA or ASIC designs that have been qualified to DO254 Level A.
· VHDL Coding of Complex high-speed digital logic.
· DOORS experience is a plus
 
Job Number: MB-5262
Job Location: Torrance, CA
Rate: 50/hr max
Duration: 3 months +
Input Date: 04/05/2018
Last Updated: 04/24/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Digital Design Engineer

Description:
Job Description:


  • Client is seeking an individual with specialized skills in digital design tools with a firm background in computer operating systems and processes necessary to develop Client and unique digital circuit blocks and apply advanced algorithms in next generation silicon processes.

  • Primary job functions will include system administration, installation, and maintenance of an advanced circuit design environment consisting of commercial- and government- developed electronic design software.

  • Other duties may include supporting analog and RF design, developing standard cell libraries, and testing fabricated chipsets.

  • The selected candidate will represent our Client and DoD customers in outside discussions and technical forums.

  • This position will require some travel and require a security clearance.




Required Skills & Experience


  • A BS Degree in Electrical/Electronic Engineering or Computer Science with five (5) years of experience is required.

  • The applicant must be familiar with the Red Hat enterprise operating system or comparable Linux distributions, installation, maintenance, port security, backup, and shell scripting.

  • Familiarity with installation and maintenance of the advanced Cadence Design Systems IC design flow, Synopsys, and Mentor Graphics tools is required.

  • The applicant must be capable of debugging and troubleshooting electronic design tool installation/maintenance and interaction with 3rd party tools and process design kits.

  • Experience in deriving verification test benches from detailed specifications is required.

  • Familiarity with at least one (1) commercial scripting programming language such as

  • PERL or Python is required.




Desired Skills and Experience

Additional experience in digital circuit design is desired, including: Verilog/VHDL behavioral modeling, Digital IC design for manufacturing (JTAG insertion, test vector generation, Built-In Self-Test), an understanding of physical design issues including layout, familiarity with memory compilers, Cadence Skill code development, and fundamentals of Process Design Kits (PDKs).



Special Requirements/ Certifications:

Must be US citizen and eligible for security clearance. The National Agency Check with Inquiries (NACI) is a background investigation primarily for federal employees who will not have access to classified information. DoD clearance is not required.

Opportunity for contract-to-hire based on worker performance, worker attendance and dependability and client business needs
 
Job Number: 18-12267
Job Location: Dayton, OH
Rate: 0.0USD/Hour
Per Diem: SPLIT
Overtime: Possible
Duration: 2018-08-10 00:00:00.0
Start Date: 2018-05-13 00:00:00.0
Input Date: 03/27/2018
Last Updated: 10/17/2018
Firm Name: NESCO RESOURCE
Attention: Cody Grimes
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Email: cjhunter.nesco@jobdivaemail.com
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ELECTRICAL ENGINEER III - ELECTRONIC DESIGN

Description:
Johnson Service Group is currently looking for an Electrical Design Engineer for a Temporary position with our Customer in Warrendale, PA. through 2018

The Electrical Design Engineer will be responsible for design, layout, testing, and evaluation of electrical and electromechanical devices and systems. They will work as part of a multi-disciplinary product development team to assess customer needs, generate and analyze concepts, create requirements and specifications, and perform formal risk assessments. They will design parts and sub-assemblies, participate in cross-functional design reviews, and support the transition of projects from development to manufacturing and field service. They will create schematics, wiring diagrams, system diagrams and PCB layouts as well as check drawings to ensure they meet specification and follow best industry practices. Most importantly, the EE exhibits the desire and ability to collaborate, and excels in teamwork and communication. Our Customer is all about continuous improvement, and this professional thrives in such an environment.



Essential Functions:

Responsible for the design, and analysis of complex level electrical systems, equipment and PCB assemblies.
Conduct feasibility studies of new and modified designs exercising judgment within broadly defined practices and policies in selecting methods, techniques, and evaluation criteria.
Work on complex multi-product level problems where analysis of situations or data requires an in-depth evaluation of various factors.
Direct support personnel in the preparation of prototype fabrication.
Participate in multi-disciplinary technical teams to research, develop, test and evaluate solutions.
Evaluate issues and failures to determine root cause and potential solutions
Work on intermediate level component and subassembly problems where analysis of situations or data requires an in-depth evaluation of various factors.
Collaborate with software, mechanical, testing and other cross functional teams to perform FMEAs and risk assessments.
Mentoring and coordination of other engineers.
Direct support of customers, to include travel to off-site locations as necessary to evaluate field issues.
Educational Requirements:

BS degree in Electrical Engineering or equivalent
Required Knowledge and Skills:

4+ years of Electrical Engineering experience
Experience the electrical and cross functional aspects of a formal product development environment including schematic capture, PCB development, Bill of Materials, MRP systems and associated tools (including Orcad or Altium).
Demonstrated experience designing electrical and robotic subassemblies and systems
Understanding of architectural design concepts of machine controls and I/O systems
Able to effectively solve problems, work independently on system level designs and multi-task as required.
Good interpersonal and communication skills
Self-starter, capable of working independently as well as building strong cross functional collaborative relationships.
Must be able to work in a team environment and assist cross functional teams with the debugging of complex issues.
The candidate must be highly motivated to work in a fast-paced environment.
Strong written and verbal communication skills.
Proficient with the Microsoft Office Suite of Products.
Must be legally authorized to work in United States
Preferred Knowledge and Skills:

Familiarity with PCB development including footprint generation and PCB layout a plus.
Familiarity with motion controllers, servo- and stepper- motors, and networked I/O systems a plus.
Experience with Product Lifecycle Management (PLM) tools and ECR, ECO processes.
Experience in LabView
Working experience with FDA regulated, ISO13485, or other highly regulated environments.
Work Conditions:

Office Environment
 
Job Number: 364448
Job Location: Warrendale, PA
Per Diem: Possible
Overtime: Possible
Duration: 12/2018 +
Start Date: ASAP
Input Date: 04/04/2018
Last Updated: 05/21/2018
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Location: Savannah, GA
Rate: $52.00 - $57.00/HR
Duration: Long Term
Shift: 1st Shift

**MUST be a U.S. Citizen or Permanent Resident**

Required Skills:
- Experience designing data acquisition systems for aircraft and test lab environment.
- Working knowledge of force, flow, pressure and temperature sensing technologies.
- Knowledge of ARINC bus architectures; 664, 429, 825
- Experience with IADS data display and analysis software

Education and Experience Requirements:
Bachelor's degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Principal Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 8930
Job Location: Savannah, GA
Rate: $52.00 - $57.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/07/2018
Last Updated: 08/06/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Are you an Electrical Engineer with a high level of experience utilizing your skills in AutoCAD? Are you looking for an opportunity to work in a fast-paced, team environment with one of the nation's leading aerospace companies? We are currently seeking an Engineer in the Lexington, Kentucky area and would love to speak with you.

The ideal candidate for this position will perform the following tasks:
* Researches and designs electrical systems for integration into various fixed wing platforms.
* Interpret customer requirements to research
* Develop and document electrical designs using applicable industry specifications such as SAE AS50881 and related design and drafting standards

Mandatory Qualifications and Experience:
* Familiarity with SAE AS50881 design guidelines
* Understanding of ANSI/ASME Y14.100 or related design and drafting standards
* Experience with AutoCAD or similar 2D design software tools
* Demonstrated previous success working in a team based environment to meet objectives

Desired Qualifications and Experience:
* Familiarity with C130 or other fixed wing aircraft
* Experience with programming environments Labview and/or Matlab
* Experience with the an engineering change process and/or configuration control process
* Experience with Catia V5 or other modern 3D parametric modeling program
* Experience with Teamcenter PLM software
* Must be able to obtain an Active DoD secret level clearance

The ideal candidate for this position will possess the following skills and characteristics:
* Strong communication skills, both oral and written
* Ability to perform electrical analysis (loads analysis, RF analysis, worst case circuit analysis)
* Ability to create and review all electrical drawing types (schematics, cable harness, etc)
* Ability to work under little or no supervision

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 127501
Job Location: Lexington, KY
Start Date: ASAP
Input Date: 04/04/2018
Last Updated: 05/01/2018
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer (TSI)

Description:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

Principal Duties and Responsibilities
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area
• Actively works to improve daily processes and ensures all work meets customer requirements
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
• Advanced degree in engineering related field preferred
• The level of technical skill and abilities appropriate for this grade will be established by each discipline

Unique Skills:
• Experience designing data acquisition systems for aircraft and test lab environment.
• Working knowledge of force, flow, pressure and temperature sensing technologies.
• Knowledge of ARINC bus architectures; 664, 429, 825
• Experience with IADS data display and analysis software

Experience/Education:
• Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job
 
Job Number: 24-244
Job Location: Savannah, GA
Rate: $52-57
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 04/16/2018
Last Updated: 08/06/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Level 3

Description:
Location: Lexington, KY
Rate: $40.00 - $60.00/HR
Duration: 9 month contract
Shift: 1st Shift
Overtime: Exempt

****MUST be a U.S. Citizen****
****MUST have an Active Secret Clearance or have had one within the last 2 years****


Description
Researches and designs electrical systems for integration into various fixed wing platforms. Interpret customer requirements to research, develop and document electrical designs using applicable industry specifications such as SAE AS50881 and related design and drafting standards.

Skill/Experience/Education
Mandatory:
- Ability to work under little or no supervision.
- Familiarity with SAE AS50881 design guidelines.
- Understanding of ANSI/ASME Y14.100 or related design and drafting standards.
- Ability to perform electrical analysis (loads analysis, RF analysis, worst case circuit analysis).
- Ability to create and review all electrical drawing types (schematics, cable harness, etc).
- Experience with AutoCAD or similar 2D design software tools.
- Demonstrated previous success working in a team based environment to meet objectives.
- Strong communication skills, both oral and written
- Active DoD secret level clearance.

Desired:
- Familiarity with C130 or other fixed wing aircraft.
- Experience with programming environments Labview and/or Matlab.
- Experience with engineering change process and/or configuration control process.
- Experience with Catia V5 or other modern 3D parametric modeling program.
- Experience with Teamcenter PLM software.
 
Job Number: 8749
Job Location: Lexington, KY
Rate: $40.00 - $60.00/HR
Per Diem: Split Possible
Overtime: Exempt
Duration: 9 mos
Input Date: 03/13/2018
Last Updated: 05/07/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer/PCB Design Engineer

Description:
--STEPPER MOTOR EXPERIENCE REQUIRED--

Senior electronics designer with a solid electronic product design skills used in complex electromechanical projects involving maintenance of life of on-market products. May lead small teams of engineers in the completion of project goals. Full responsibility of the design from concept through prototyping and leading into integration in final production line. Must have the technical ability to oversee and guide staff towards the completion of project goals. Applies familiarity with the FDA’s guidance on medical device development to ensure compliance.

Provide Core Electrical Engineering expertise:
a)Circuit design and analysis skillset, including in-depth understanding of technologies currently used in the industry.
b)Analog and digital circuit design
c)Expertise in computer-aided electrical design tools (eCAD)
d)Testing circuit performance
Use experience in board level (PWA) manufacturing and current practices, including
a)Analyzing component specifications and creating internal specifications as needed
b)Interacting with new and existing vendors and managing vendor relationships
c)Managing eCAD outputs per customer practices and ensuring that customer designs are properly executed by external contract manufacturers in support of R&D activities.

About Enea
Enea is a global supplier of network software platforms and world class services, with a vision of helping customers develop amazing functions in a connected society. We are committed to working together with customers and leading hardware vendors as a key contributor in the open source community, developing and hardening optimal software solutions. Every day, more than three billion people around the globe rely on our technologies in a wide range of applications in multiple verticals – from Telecom and Automotive, to Medical and Avionics. We have offices in Europe, North America and Asia, and are listed on Nasdaq Stockholm. Discover more at www.enea.com and start a conversation at info@enea.com.
 
Job Number: 575
Job Location: Chicago, Il
Rate: DOE
Per Diem: YES
Overtime: YES
Duration: 1 year
Start Date: April 23, 2018
Input Date: 05/02/2018
Last Updated: 05/18/2018
Firm Name: ENEA SOFTWARE AND SERVICES
Attention: Walter Walonoski
Address: 2555 E CAMELBACK RD STE 280
City, State: PHOENIX, AZ 85016
Phone: 480/753-9200
Fax Phone: 480/753-6400
Website: www.enea.com/services/expertise

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Design & Analysis Engineer V - (AZ)

Description:
ACTIVE SECRET CLEARANCE REQUIRED TO START.

Avionics Systems Engineer responsible for avionics software/hardware integration on the Apache Area Weapon System (AWS). Responsibilities include complex avionics development activities including pursuing advanced technologies, performing trade studies, developing technical approaches, decomposition, flowdown and traceability of system and software requirements, and system/subsystem verification testing. The purpose of the work is to perform gun scoring and analysis. Will be a member of a cross functional integrated product team. Responsible for close coordination with US Army and international customers to ensure implementation is responsive to requirements, using appropriate project integration methodologies, and project management practices. Work with customers to develop and document complex electronic and electrical system requirements. Analyze and translate requirements into system, hardware and software designs and interface specifications. Test and validate to ensure system designs meet operational and functional requirements. Monitor supplier performance to ensure system integration and compliance with requirements. Solve problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Research specific technology advances for potential application to company business needs.

The ideal candidate must be able to design, develop, test and present complex electrical and networking systems that utilize sensor technology. Exposure to missile, gun, or rocket technology is highly desired. Control theory expertise desired.

Bachelor's 14 or more years' experience, Master's with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

ACS Group (formerly 'Comforce')
 
Job Number: EEaz
Job Location: Mesa, AZ
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 9+ Months
Start Date: ASAP
Input Date: 04/03/2018
Last Updated: 06/22/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical/Electronic Systems Design & Analysis Engineer III- (HB)

Description:
- Developing electronic and electrical flight control system solutions
- Participating in modification projects for flight control hardware and software designs based on platform requirements
- Executing systems and software testing to verify operational and functional requirements
- Managing hardware/software suppliers' performance to ensure customer requirements are met
- Supporting resolution of product integration & field operation issues
- Researching new technologies for potential application to C-17
- Developing solutions to technical problems of safety of flight scope and impact
- Applying solid engineering, scientific, and common sense principles in the context of organizational dynamics and real world cost & schedule targets
- Integrating into teams and collaborating with multiple engineering disciplines in solving moderately complex problems concerning fielded airborne avionics and flight control (AFC) systems, involving both hardware and software.
- Participate in full lifecycle projects to develop functional and interface requirements; design hardware, software and interface specifications; test and validate to ensure system designs meet operational and functional requirements; assist in monitoring supplier performance to ensure system integration and compliance with requirements
- Work with customers and their representatives to obtain feedback for product enhancements and corrective actions.

Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

ACS Group (formerly 'Comforce')
 
Job Number: EEIIIHB
Job Location: Huntington Beach, CA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 04/11/2018
Last Updated: 06/22/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical/Electronic Systems Design & Analysis Engineer IV - (OK)

Description:
Must be able to obtain a Security Clearance.

We are seeking Communication / Network System Design engineers within Avionics and Flight Controls Engineering organization of the Military Airlifter Program in Oklahoma City, OK. This is a senior level position in Avionics and Flight Controls Engineering organization of the Military Airlifter Program in Oklahoma City, OK. Working under the supervision of Lead Engineers, selected candidates will quickly integrate into the team and collaborate with multiple engineering disciplines in the specification, test and support of airborne electronic subsystems including sensors, controls, communications, displays, and processors. The candidate will participate in projects aimed at solving issues and implementing their solutions utilizing Agile methods and processes. The candidate will have the opportunity to work with customers and their Boeing representatives to obtain feedback for product enhancements and corrective actions.

Tasks may include:
Development of electronic and electrical system solutions
Participation in modification projects for basic hardware and software designs based on platform requirements
Execution of systems and software testing to verify operational and functional requirements
Management of hardware/software suppliers' performance to ensure customer requirements are met
Supporting resolution of product integration & aircraft production issues

An ideal successful candidate possesses technical and engineering skills already developed while attaining his/her Science degree(s) and entry level work experience. Excellent communication skills (written and verbal) and the ability to work in a team environment within a complex organization is a must. The selected candidate will be tasked to develop solutions to technical problems of limited scope and impact; and to apply solid engineering, scientific, and common sense principles in the context of organizational dynamics and real world cost & schedule targets.

The selected candidate will integrate into our Agile Development teams, where personal attributes that include ownership, responsibility, and commitment are a must. The candidate will be expected to interact professionally with customers, suppliers, field representatives, and fellow engineers. The candidate must be dependable, innovative, an independent thinker, and possess excellent & creative problem solving skills. The candidate should have demonstrated 'hands on' capabilities in class projects and/or previous work experience or hobbies. The candidate should also be able to demonstrate through past experience his/her capability to work independently, persevere, and generally 'find a way' when roadblocks are encountered.

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

ACS Group (formerly 'Comforce')
 
Job Number: EEOK29919
Job Location: Oklahoma City, OK
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 04/09/2018
Last Updated: 06/22/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic Systems Design & Analysis Engineer IV - (OK)

Description:
Active Secret Clearance, NOT REQUIRED to start.

Candidate to perform Ground Support software modification and integration. Familiarity with ATLAS, test equipment, LabWindows CVI and ability to troubleshoot electronics required.

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

ACS Group (formerly 'Comforce')
 
Job Number: EEOK29921
Job Location: Oklahoma City, OK
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 04/09/2018
Last Updated: 06/01/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic Systems Design & Analysis Engineers/Software

Description:
Seeking engineers on the Military Airlifter Program in Oklahoma City, OK. Candidate to perform Ground Support software modification and integration. Familiarity with ATLAS, test equipment, LabWindows CVI and ability to troubleshoot electronics required. Must have Engineering Degree and be able to obtain security clearance

Email resumes to: mmccarthy@pdstech.com
 
Job Number: BO-OK-Electronic Atlas
Job Location: Oklahoma City, OK
Rate: $70.00-$75.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 6 Months+
Start Date: ASAP
Input Date: 04/09/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

Embedded S/W Engineer - Level 2 (6) - TX - C

Description:
Chipton-Ross is seeking a Embedded S/W Engineer - Level 2 (6) for an opening in Grand Prairie, TX.

RESPONSIBILITIES:
Client's Tactical Missiles Advanced Programs area is seeking Software Engineering candidates to perform development associated with the following program product lines: Tactical Missile System (TACMS), Army Tactical Missile System (ATACMS), and Guided Multiple Launcher Rocket System (GMLRS). Software engineering effort will be to implement Operational Flight Software (OFS), Operational Test Software (OTS), and Launcher Simulation/Emulator Software updates.

Skills required are real time programming, including experience with the vxWorks real time operating system, inertial and GPS navigation applications, and Ethernet communication protocol. Preferred skills and experience include use of the GNAT Ada compilation system, C/C++, Wind River Workbench development environment, Power PC experience, including use of an In-Circuit Emulator, and the Razor configuration management data base system.

BS in Computer Engineering, Computer Science, Software Engineering, or Related Field C/C++, ADA, Real Time Software Development, Wind River Workbench, Power PC Development, vxWorks, Inertial & GPS navigation unit experience

PREFERRED EXPERIENCE:
Software configuration management tool experience, Razor

EDUCATION:
BS in Computer Engineering, Computer Science, Software Engineering, or Related Field C/C++, ADA, Real Time Software Development, Wind River Workbench, Power PC Development, vxWorks, Inertial & GPS navigation unit experience

WORK HOURS:
9/80, 1st Shift, Full-Time

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 165908
Job Location: Grand Prairie, TX
Rate: Up to $80.73 DOE
Duration: 12 Months
Input Date: 10/17/2017
Last Updated: 10/17/2018
Firm Name: CHIPTON ROSS
Attention: Max Cameron
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: mcameron@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Lead Software Engineer

Description:
LEAD Software Engineer

ENEA…an environment where you can innovate.

Essential Functions:
• Right-hand of Software Engineering Manager.
• Full lifecycle software development, including design, implementation, test and qualification of software
• Capture requirements to ensure code meets customer expectations
• Identify, evaluate and implement tools and processes to continually improve the software development process
• Conduct code reviews and apply best practices and coding standards

Required Skills/Qualifications/Competencies:
• Must have:
- C++ or C#
- Medical device SW engineering exp
- Windows developer
- 8+ years exp
- Some 'leadership' capabilities
- Visual Studio

Preferred Skills/Qualifications/Competencies
• Medical device development experience
• Debugging hardware using software
• Manufacturing line control or test software
• Experience with any of the following: Win32, MFC, Windows Embedded, USB development, LabVIEW.

 
Job Number: 654
Job Location: Phoenix, AZ
Rate: DOE
Per Diem: YES
Overtime: YES
Duration: CTH
Start Date: September 1, 2018
Input Date: 08/28/2018
Last Updated: 09/13/2018
Firm Name: ENEA SOFTWARE AND SERVICES
Attention: Ashley Kaapuni
Address: 2555 E CAMELBACK RD STE 280
City, State: PHOENIX, AZ 85016
Phone: 480/753-9200
Fax Phone: 480/753-6400
Website: www.enea.com/services/expertise

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer 3 (Hood River, WA)

Description:
Embedded Software Engineer 3

JOB DESCRIPTION
As a member of the Software Engineering department you will:
• Be a key player in an agile software development team
• Solve challenging engineering problems and participate in the development of real-time safety critical embedded software using industry best practices
• Ensure software testability, test coverage and test maintainability
• Be responsible for assuring the delivery of high quality products and software services
• Prototype and integrate software solutions on target hardware platforms
• Consult and support fellow electronic hardware engineers and other engineering staff
• Take responsibility for achieving goals and meeting project deadlines
• Have fun in a tight knit team while working on a game changing UAS!

QUALIFICATIONS
• Experience with compiled programming languages, C/C++.
• Understanding of computing machinery (memory, secondary storage, I/O, FPGA, processor, data bus, etc.) as it relates to software.
• Experience with microcontroller/assembly/firmware development.
• Experience designing for resource constrained systems and experience with firmware and embedded systems software development.
• Strong problem-solving abilities, careful attention to detail, open to taking direction and adapting to course corrections.
• Experience with hands-on troubleshooting hardware and debugging software
• Ideal candidate has experience with safety critical systems.
• Excellent communication and interpersonal skills; able to work well individually or in a team.
• Ability to independently identify and address tasks
• Strong organization and time management skills
• Willingness to learn and contribute to a team environment

Email Resume in MS Word Doc. Format to: Albert.Peniche@Yoh.com

ALBERT PENICHE
SR. TECHNICAL RECRUITER, AEROSPACE & DEFENSE
YOH AVIATION, A DAY & ZIMMERMANN COMPANY
D 314-791-1565
albert.peniche@yoh.com
 
Job Number: APEMBED
Job Location: Bingen, WA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: LT - Direct
Start Date: ASAP
Input Date: 03/27/2018
Last Updated: 04/09/2018
Firm Name: YOH SERVICES
Attention: Albert Peniche
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/791-1565
800 Phone: 800/298-0666
Website: jobs.yoh.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Systems Engineer

Description:
Embedded Systems Engineer needed to join development team.



Job Responsibilities

  • Aid in the development of the Vehicle Control Unit (VCU) and/or Electronic Control Unit (ECU);

  • Create/refine finite state machines, and implement controllers for vehicle systems in software;

  • Aid in the development of a system for distributed control of an engine, electric motors, and actuators over a CAN network;

  • Support the design of a wing fold interface system working with existing electromechanical actuators/sensors;

  • Support definition of the data interface specification (e.g. CAN, RS-485, etc.);

  • Integrate microcontroller software for CAN bus based actuation and sensing per DO-178 (potentially implemented via Simulink and Stateflow);

  • Address custom CAN messaging and VCU communications with hand coding as required;

  • Participate as a key player in the design-build-test process, including conceptual, preliminary and detailed design, requirements definition, design reviews, prototyping, and testing;

  • Coordinate and communicate effectively with other engineers, technical personnel, and management;

  • Support and participate in testing activities component, drive, and/or flight as needed, including test plan creation, data analysis, and test report generation and documentation;

  • Support the Certification Director with compliance and certification activities and best practices, including design, test, and analysis documentation, internal and external audits, and other activities as needed.


Qualifications


  • The candidate must have:

    • A Bachelor\'s degree in Computer, Electrical, Mechanical, or Aerospace Engineering and 5+ years technical work experience, or;

    • A Master\'s degree in Computer, Electrical, Mechanical, or Aerospace Engineering and 3+ years technical work experience.



  • Proven experience with robust software development cycles: taking software from concept through detailed development, executing code on targets, and testing to internal/external requirements;

  • Proven experience developing software for automobiles, particularly for vehicle control;

  • Experience with CAN messaging protocol;

  • Outstanding organization, analytical, and problem solving skills;

  • Excellent written and verbal communication skills, as well as presentation skills;

  • Software Experience: C/C++.


Highly Desired Qualifications


  • Experience with software design, documentation, and testing per DO-178B/C;

  • Functional safety experience with ISO-26262 or IEC 61508;

  • Formal training or practical experience with software revision control techniques and tools;

  • Experience with ASTM F2245 or FMVSS;

  • Experience with LabVIEW or other real time data acquisition software;

  • Experience programming CPLDs or other logic devices;

  • Familiarity with modern electrical design layout tools such as Altium or Cadence products;

  • Knowledge or expertise in CAN Aerospace, CANopen, SAE J1939, ARINC-429 ARINC-825protocols;

  • Familiarity with Python or Perl;

  • Familiarity with Fortran.




 
Job Number: 18-13621
Job Location: Woburn, MA
Rate: 130000.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2018-04-05 00:00:00.0
Input Date: 04/05/2018
Last Updated: 04/16/2018
Firm Name: NESCO RESOURCE
Attention: Hong Lu
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Systems Engineer - Avionics

Description:
Job Description

An experienced system engineer with the ability to develop and/or review system requirements in alignment to customer specifications resulting in hardware and software requirement flow-down. Ability to develop test cases and procedures, test execution, PR generation and resolution, configuration of hardware and software test equipment and diagnose problems



Experience: 5 + years



Education: Bachelor\'s degree in Computer Science, EE, systems



Specific Hardware/Software:

Avionics: IO interfaces- CAN Bus, IEEE 1394, MIL-STD 1553, A429, RS422, PCIE,



Must have skills:

Requirements development, systems integration and verification, use of lab test equipment, ability to understand software and hardware enough to troubleshoot issues, problem analysis and resolution, good communication skills, ability to work independently but as part of a team to provide feedback and problem management, understanding of project management to schedule and budget



Desired skills:

DOORs, GEARS

Experience with C code and assembly language for Power PC processors.

General lab skills to support testing of product and its interfaces.

FAA certification experience, such as usage of any of the following processes - DO-254A, ARP4754A, DO-178C.

 
Job Number: 18-13208
Job Location: Grand Rapids, MI
Rate: 70.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2019-04-22 00:00:00.0
Start Date: 2018-04-23 00:00:00.0
Input Date: 04/03/2018
Last Updated: 04/23/2018
Firm Name: NESCO RESOURCE
Attention: Brian Carrillo
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engine/APU, ECS, Fuel Systems Engineer

Description:
Engine/APU, ECS, Fuel Systems Engineer

Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
Required Experience in the following:
• System Certification Requirements: Cert Plan, Flight Test Plan, Flight Test Report, Qual Test Report, Lab test report, Testing requirements/Flight Clearance and or SOF Requirements, development testing
• Hardware Qualification: Plans, procedures, Reports, conformity, ATP & Outline Drawings
• Software Certification: Experience reviewing PSAC, CIA, SAS. Experience in software V&V Required Experience in the following:
• Engine Systems (FADEC)
• Environmental Control Systems
• APU systems
• Fuel systems (Distribution and Indication)

Desired Experience in the following:
• Working Knowledge ARP4754 and CFR 25
• Exposure to Part 33 certification
• Project Management Skills/Experience:
• Configuration change management
 
Job Number: 7519
Job Location: Savannah, GA
Rate: $58-$63
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/07/2018
Last Updated: 08/06/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Electromechanical - 3 / active secret preferred / CREO / electronic packaging CA

Description:
1631
Engineer Electromechanical - 3 (Job Number: 18002041)

Number of Openings: 1

Location(s): United States-California-Redondo Beach


Shift: 1st Shift

Target Start Date: Mar 19, 2018

Target End Date: Mar 15, 2019

Pay Rate: $58/hr. - $60/hr.

Work Week: 9/80

Location: Redondo Beach, CA

Duration: 1 year

The responsibilities include mechanical design & analysis using computer-aided design (CAD), conducting packaging trades, tolerance and interference analyses, generating drawing packages & associated electronic data, and supporting the fabrication, assembly and test of the hardware.


Basic Qualifications:

•5 Years with Bachelors in Science; 3 Years with Masters; 0 Years with PhD.
•A Bachelor of Science degree in a STEM (Science, Technology, Engineering or Math) discipline
•Electronic packaging, CAD, or mechanical design experience in an aerospace environment
•Demonstrated technical skills with experience supporting a multi-disciplined team
•Experience working with different partners across organizations and programs
•Proficient in performing tolerance and interference analyses
•Experience in generating and releasing product detail and assembly drawings
•Experience with PTC Creo / Intralink software applications



Preferred Qualifications:

•A Master’s Degree in Mechanical or Aerospace Engineering and 4+ years of engineering experience in an aerospace environment
•Experience with electronic packaging / mechanical design for airborne & space applications
•Electronics design development and sustaining experience spanning cradle to grave
•Experience with Enovia PLM software application
•Proficiency with electrical design, electronics manufacturing processes and qualification activities
•Familiarity with research and development of advanced packaging technologies
•Active DoD Secret or Top Secret, and/or SCI clearance
 
Job Number: MB-1631
Job Location: Redondo Beach, CA
Rate: 58-60/hr
Per Diem: no
Duration: 12 month contract
Input Date: 06/12/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Embedded Software 5 / must be able to obtain secret clearance CA

Description:
1644
Engineer Embedded Software 5 (Job Number: 18007330)

Number of Openings: 1

Location(s): United States-California-Azusa


Shift: 1st Shift

Target Start Date: May 7, 2018

Target End Date: May 3, 2019

Pay: $87.00 - $95.00/hr

Location: Azusa, CA

Work Week: 9/80A

Duration: 1 year

Clearance: Secret preferred, but not required to start.

Northrop Grumman’s Aerospace Sector, Military & Civil Space Systems Division, Azusa CA, is in need of an Embedded Software Engineer to work with an outstanding team in support of next generation satellite sensors.

The candidate will be required to perform software development and maintenance of flight software which performs satellite payload on-orbit missions. The candidate will troubleshoot any anomalies found with the flight software, and provide technical expertise on key technological problems involving the flight software. Good presentation and writing skills are also essential.


Basic Qualifications:

- 14 Years with Bachelors in Science; 12 Years with Masters; 9 Years with PhD.Bachelor’s degree in a STEM field (Science, Technology, Engineering or Mathematics)
- A minimum of 5 years of experience with embedded software design, development and implementation
- Experience with Real Time Process (RTP) using VxWorks
- Experience with writing hardware device drivers for embedded software applications
- Strong real-time programming skills with C or C++ programming languages
- U.S. Citizenship is required.


Preferred Qualifications:

Master's Degree in a STEM field (Science, Technology, Engineering or Mathematics)
- Experience with writing hardware device drivers for PowerPC P2020 processor board
- Experience with Space Microsystems Proton400kTM Board Support Packages (BSP)
- Experience with writing make file for compiling optimizing the software executable
- Experience with Downloadable Kernel Module (DKM)
- Experience with Perl or Python programming language
- Must be able to obtain an retain an Active DoD Secret or higher clearance or Active Secret Clearance preferred
 
Job Number: MB-18007330
Job Location: Azusa, CA
Rate: 87-95/hr
Per Diem: no
Duration: 1 year
Start Date: 9/80
Input Date: 05/04/2018
Last Updated: 05/09/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Fire Control Tracked Combat Vehicles

Description:
Be a part of a fortune 500 Combat Systems group and a global leader in the design, development, production, support and enhancement of tracked and wheeled military vehicles. Our client has a 70 year defense heritage of providing a full spectrum of high quality, technically superior, high value products and services to the United States and its Allies. Their employees are dedicated to making the Company the World’s preferred supplier of land vehicles and weapons systems.

If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

Engineer Fire Control Tracked Combat Vehicles
(U.S. Citizenship Required*)
Sterling Heights, MI
2018-5751
Responsibilities:
• Design engineer with emphasis on system and subsystem integration and test.
• Review and develop hardware and software requirement documents and test plans.
• Support hardware and software integration in a lab environment to include the use of various test equipment to include dynamic analyzers, oscilloscopes, logic analyzers, Ethernet, RS-422, etc.
• Perform vehicle level testing utilizing the same type of equipment.
• Analyze subsystem requirements and develop logic for flowcharts, state charts, state diagrams, and fire control algorithms for design documents.
• Support fielding and production sites to investigate/resolve fire control issues.
• Support integration and testing of electrical control devices and sensors on various vehicle platforms.
• Provide technical support and communication as required to program office, customers, and internal other departments
• Travel up to 20%

Qualifications:
• Must be capable of getting a secret clearance
• Occasional travel to field sights required
• Extensive vehicle and lab testing required
• Must meet ASR requirements to work inside tanks and military vehicles
• Extensive use of computer and test equipment in both the laboratory and field environment
• Good communication skills required
• Must be capable of working in a team environment
• Occasionally must lift and carry test equipment weighing 30 lbs
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor’s Degree required. Electrical Engineering preferred; similar technical degrees will be considered with relevant experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunities to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-5751
Job Location: Sterling Heights, MI
Rate: Based on experience
Duration: 12 Months
Input Date: 04/02/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: jobs@moseleytechnical.com
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Engineer Structural- 5- Secret Clearance

Description:
PDS Tech is seeking a candidate for the Engineer Structural 5 position located in Melbourne, FL.  

Perform static, dynamic, and DaDT structural analyses of metallic airframe structure, mechanical systems, and equipment, by hand and by using the automated methods and procedures approved for the program.
Ensure that 
designs meet program requirements and are the lightest, lowest cost, and highest quality products consistent with schedule and budget objectives.
The analyst may also be expected to derive non-flight applied loads, create, extract and 
distribute internal loads, and perform weight and stiffness optimization. T
ools utilized may include FEMAP, NX,Teamcenter 
and other software applications.

Basic Qualifications:



Bachelor of Science degree (ME/AE/CE) with 14 years of experience in AEROSPACE Structural Analysis.




Preferred Qualifications:



Knowledge of FEMAP and NX CAE. Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplishing them simultaneously, and comprehend and analyze complex problems and develop solutions. Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplishing them simultaneously, and comprehend and analyze complex problems and develop solutions.

 


 
Job Number: 1710075260
Job Location: Melbourne, FL
Duration: 5 months
Input Date: 10/11/2017
Last Updated: 10/17/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Elisa Petersen
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000023L3MAAU&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Design Checker - Level 3

Description:
Location: Lexington, KY
Rate: $25.00 - $35.00/HR
Duration: 1 year contract
Shift: 1st shift

****MUST have an Active Secret Clearance or to have had one within the last 2 years*****

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years*****
Examines engineering drawings and related documents for soundness, efficiency, and simplicity in design; completeness, clarity, and dimensional accuracy; correctness of materials and processes; conformity to design/drafting standards, design specifications, and practicability; and economy of fabrication, assembly, and installation.
- This position will support engineers in the review of design data that will comply with applicable military specifications, SAE, ANSI, ASME, and other related standards.
- This position will be responsible for reviewing drawings for formatting errors and working with the engineering team to ensure a high level of quality in the design data.
- This position will also be responsible for reviewing change documentation and its related incorporations for completeness and correctness.
- This position will help develop a set of common Design Standards that meets our Customers and Program requirements.
- This position will be expected, at times, to be involved with the drawing creation and subsequent Production review processes.

Skill/Experience/Education
Mandatory:
Must have 6+ years of experience of each of the following:
- Familiarity with SAE AS50881 and ANSI/ASME Y14.100 or related design and drafting standards - CATIA V5 experience
- Familiarity with Change Documentation process and all related requirements to this process, Microsoft office suite (Word, Excel, PowerPoint)
****MUST have an Active Secret Clearance or to have had one within the last 2 years*****

Desired:
- Teamcenter or similar PDM/PLM software tool
- Experience working in an aerospace environment with exposure to or interface with DoD customers
- AutoCAD or other 2D drafting program
 
Job Number: 8590
Job Location: Lexington, KY
Rate: $25.00 - $35.00/HR
Per Diem: Split Possible
Overtime: No
Duration: 1 yr
Input Date: 03/07/2018
Last Updated: 07/10/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Designer 3

Description:
If interested then please share updated resume at ravi@iconma.com

Equipment & Tool Designer 3/4

Location: Everett, WA || Auburn, WA
Duration: 9 months

Job Description:
Investigates and develops complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements. Participates in design reviews, collects design requirements, creates and revises drawings and models, researches the application of robotics, automation and new technology to support the build plan. Creates off-load packages, specifications, purchase requests and usage instructions for equipment and tooling. Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Develops and documents equipment and tooling inspection and usage instructions, preventative maintenance plans, and user training. Provides technical support for engineering changes and discrepancies by investigating problems and analyzing data to identify solutions. Maintains hardware and software configuration. Assesses and makes recommendations for disposition of equipment and tooling.

Skill Code:
66W-Tech Designer

Education / Experience:
AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.
 
Job Number: 18-03763
Job Location: Everett, Auburn, WA
Input Date: 03/06/2018
Last Updated: 04/16/2018
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/321-3508
800 Phone: 855/686-4768
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Designer III & IV (Everett, WA)

Description:
SEVERAL OPENINGS IN THE EVERETT/SEATTLE AREA.

Leads the development of highly complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements. Leads design reviews, design requirement collection, drawing creation and revision. Researches the application of robotics, automation and new technology to support the build plan. Creates off-load packages, specifications, purchase requests and usage instructions for equipment and tooling. Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Establishes and validates spares requirements. Leads the implementation of best practices into functional process documentation to drive standard work. Oversees the development and documentation of equipment and tooling inspection and usage instructions, preventative maintenance plans, and user training. Provides technical direction to support engineering changes and discrepancy resolution. Oversees the maintenance of hardware and software configuration. Assesses and makes recommendations for disposition of equipment and tooling. CATIA V5

AA degree in related discipline and typically 6 or more years of related experience or an equivalent combination of education and experience.

ACS Group (formerly 'Comforce')
 
Job Number: ToolDesEverett
Job Location: Everett, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 06/28/2018
Last Updated: 09/04/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Engineer 3 (Robotics)

Description:
Equipment & Tool Engineer 3

Location: Everett, WA
Duration: 9 months

Description:
The primary responsibilities of the job roles include the following:
Ensure factory equipment functions to meet production system requirements and verify rate equipment technical requirements are satisfied through procurement and commissioning.
The successful candidate will have automation experience and a strong problem solving background troubleshooting complex production equipment as well as an ability to support procurement of rate equipment projects.

Responsibilities include the following:
- Supports the evaluation of program and project requirements, develops moderately complex equipment concepts and designs solutions for the Production System.
- Ensure compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements.
- Validates contractual performance milestones, maintains configuration control, conducts project and in-depth technical reviews, prepares plans for productions readiness, preventative maintenance, and spares.
- Conducts equipment training for Production and Maintenance personnel. Develops and implements moderately complex work-arounds and maintains configuration of hardware, software and documentation.
- Supports in-production equipment and troubleshoots issues working with equipment services to perform root cause corrective action resulting in preventative measures to minimize downtime.

Education / Experience:
Degree and typical experience in engineering classification: Bachelor's and 5 or more years' experience, Master's degree with 3 or more years' experience or PhD degree with experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Must have at least 5 years of experience working with manufacturing or equipment systems.
Excellent aptitude to understand the technical details and their effect on the overall system is required.
Familiarity with PLC programming, Siemens and/or FANUC, CNC logic and/or experience programming equipment machine controls is required.

Skill Code: 66U-Designer Engineer

If interested then please share updated resume at ravi@iconma.com
 
Job Number: 18-03766
Job Location: Everett,, WA
Input Date: 03/22/2018
Last Updated: 04/16/2018
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/321-3508
800 Phone: 855/686-4768
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Engineer 4

Description:
If interested then please share updated resume at ravi@iconma.com

Equipment & Tool Engineer 4

Location: Everett, WA
Duration: 9 months

Description:
Develops program and project requirements, develops highly complex equipment and tooling concepts and designs solutions, including alternatives for the Production System. Validates analysis of technical data, influences product engineering design and makes robotics, automation or technical recommendations to support production system integration for a aerospace products. Leads the creation and modification of equipment and tooling definition at the program level. Executes project plans, provides input to Make/Buy decisions and partners with Procurement to meet program schedule, cost and quality targets. Ensures compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Leads gated reviews and develops plans for production readiness, preventative maintenance and spares. Validates contractual performance milestones. Develops and implements work-arounds and maintains configuration of hardware, software and documentation. Conducts studies and make recommendation for disposition of assets.

Education / Experience:
Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctor of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Skill Code: 66V-Analysis Engineer
 
Job Number: 18-03764
Job Location: Everett,, WA
Input Date: 03/06/2018
Last Updated: 04/16/2018
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/321-3508
800 Phone: 855/686-4768
Website: www.iconma.com

Equipment & Tool Engineer 4 - AZ

Description:
Chipton-Ross is seeking a Equipment & Tool Engineer 4 for an opening in Mesa, AZ.

RESPONSIBILITIES:
Develops program and project requirements, develops highly complex equipment and tooling concepts and designs solutions, including alternatives for the Production System. Validates analysis of technical data, influences product engineering design and makes robotics, automation or technical recommendations to support production system integration for a aerospace products. Leads the creation and modification of equipment and tooling definition at the program level. Executes project plans, provides input to Make/Buy decisions and partners with Procurement to meet program schedule, cost and quality targets. Ensures compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Leads gated reviews and develops plans for production readiness, preventative maintenance and spares. Validates contractual performance milestones. Develops and implements work-arounds and maintains configuration of hardware, software and documentation. Conducts studies and make recommendation for disposition of assets.

REQUIRED EXPERIENCE:
Must have extensive checking experience.
Must be highly skilled in CATIA & Industry Standards.

EDUCATION:
Accredited Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

FULL TIME/FIRST SHIFT
WORK HOURS: 7:00 AM - 3:30 PM
 
Job Number: 168370
Job Location: Mesa, AZ
Rate: $DOE
Duration: 6 Months
Input Date: 02/01/2018
Last Updated: 10/17/2018
Firm Name: CHIPTON ROSS
Attention: Kevin Suk
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: ksuk@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Engineer III - (Everett, WA)

Description:
SEVERAL OPENINGS IN EVERETT, WA.

Develops program and project requirements, develops highly complex equipment and tooling concepts and designs solutions, including alternatives for the Production System. Validates analysis of technical data, influences product engineering design and makes robotics, automation or technical recommendations to support production system integration for a aerospace products. Leads the creation and modification of equipment and tooling definition at the program level. Executes project plans, provides input to Make/Buy decisions and partners with Procurement to meet program schedule, cost and quality targets. Ensures compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Leads gated reviews and develops plans for production readiness, preventative maintenance and spares. Validates contractual performance milestones. Develops and implements work-arounds and maintains configuration of hardware, software and documentation. Conducts studies and make recommendation for disposition of assets. CATIA V5

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

ACS Group (formerly 'Comforce')
 
Job Number: EquipToolEngEverett
Job Location: Everett, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 04/10/2018
Last Updated: 06/01/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FMS SYSTEMS / SOFTWARE ENGINEER

Description:
ENEA is working with a client to provide System Software Analysis on Flight Management Systems (FMS). We are looking for an engineer with direct FMS experience and has functional expertise in one of the following areas: Performance, Navigation, Guidance, or Communications/DataLink.
RESPONSIBILITIES:
• Perform system optimization and assess overall performance through the use of in-house or custom-developed analysis tools.
• Compare the performance of architecture variants and conduct trade studies.
• Mentor and work with junior analysts as part of larger study teams.
• Apply broad and/or deep experience with customer aerospace systems and technologies in one or more specific functional areas (Performance, Navigation, Guidance, or Communication/DataLink).
• Provide expert advice within a specific technology or functional area (Performance, Navigation, Guidance, or Communication/DataLink).
• Provide support for growing modeling and analysis capabilities in new support areas.
• Interact independently with program office and customer organizations.
• Creatively and effectively apply analysis to problems as needed.
BASIC QUALIFICATIONS:
• BS degree in Engineering (preferably Computer Science or Electrical Engineering)
• 10+ years’ experience in Systems and Software Engineering.
• Substantial experience or background in one of the following areas: architecture performance analysis and modeling; optimization and/or decision support; communications systems analysis; electronics systems analysis, software and/or simulation development.
• Excellent written and verbal communication skills.
• Dependability and good interpersonal skills.

About Enea
Enea is a global supplier of network software platforms and world class services, with a vision of helping customers develop amazing functions in a connected society. We are committed to working together with customers and leading hardware vendors as a key contributor in the open source community, developing and hardening optimal software solutions. Every day, more than three billion people around the globe rely on our technologies in a wide range of applications in multiple verticals – from Telecom and Automotive to Medical and Avionics. We have offices in Europe, North America, and Asia, and are listed on Nasdaq Stockholm. Discover more at www.enea.com and start a conversation at info@enea.com.
Enea Software and Services, Inc.

(Enea) provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Enea complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.
Enea Software and Services, Inc. expressly prohibits any form of workplace harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. Improper interference with the ability of Enea’s employees to perform their job duties may result in discipline up to and including discharge.
 
Job Number: WW011118GE
Job Location: Phoenix, AZ
Rate: DOE
Per Diem: YES
Overtime: YES
Duration: 3-6 MONTHS
Start Date: 1.22.18
Input Date: 04/16/2018
Last Updated: 05/02/2018
Firm Name: ENEA SOFTWARE AND SERVICES
Attention: Walter Walonoski
Address: 2555 E CAMELBACK RD STE 280
City, State: PHOENIX, AZ 85016
Phone: 480/753-9200
Fax Phone: 480/753-6400
Website: www.enea.com/services/expertise

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software OR Systems Engineer

Description:
The initial training period for 6 months in Cedar Rapids, then work effort will be brought back to Enea Phoenix Engineering Office if this is more convenient for you. May also choose to stay onsite in Iowa.

FMS engineers (Systems and/or Software Engineers)
Job Requirements:

Significant Avionics FMS or Flight Controls software experience is required

Software experience that can also write Low and Higher Level Requirements and associated tests. Debugging software on target hardware to obtain root cause is also a plus
Undergraduate or Graduate degree in Computer Science, Computer Engineering, Electrical Engineering, or related scientific discipline

Working knowledge of high-order programming languages (C, Ada, C++, Matlab/Simulink, etc.)

Demonstrated teamwork and leadership abilities

Strong communication and presentation skills

Strong object-oriented language (C++, C#, Python, etc.) and software development methodologies (Waterfall, Agile, etc.)

Strong background with GUI a plus!

Embedded software experience is required

Knowledge of DO-178 Development Standards

Enea does not have the ability to sponsor applicants for work visas for this position.
 
Job Number: 398
Job Location: Cedar Rapids, IA
Rate: 55.00
Per Diem: YES
Overtime: YES
Duration: 1 YEAR +
Start Date: August 30
Input Date: 07/26/2018
Firm Name: ENEA SOFTWARE AND SERVICES
Attention: Walt Walonoski
Address: 2555 E CAMELBACK RD STE 280
City, State: PHOENIX, AZ 85016
Phone: 480/753-9200
Fax Phone: 480/753-6400
Website: www.enea.com/services/expertise

Guidance, Nav & Ctrl Eng (3)-FL-C

Description:
Chipton-Ross is seeking 3 (three) Guidance, Nav & Ctrl Eng in Orlando, FL.

Description
Guidance, Navigation, and Control (GNC) engineer position. Responsibilities include, but are not limited to developing and analyzing GNC algorithms, Inertial Tracking / Target State Estimation algorithms, and Navigation algorithms using various simulations. Experience designing closed-loop control systems and missile autopilot algorithms is a big plus. Develop and test 6-DOF simulation models and simulation builds, and perform flight software verification / hardware-in-the-loop (HWIL) integration tests. Perform development and performance assessment in the context of Integrated Flight Simulation (IFS). The candidate should have a strong controls background and an understanding of Optimal State Estimation techniques using Kalman filters. Must have C/C++, and, MATLAB programming experience.

Skill/Experience/Education
Mandatory:
Bachelor's Degree, or higher, from an accredited University and at least three (3) years experience working GNC related assignments.

Desired:
RF/EO Modeling, Mission Planning, Common Simulation Framework (CSF), and / or Simulink and FORTRAN experience is a plus

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 166750
Job Location: Orlando, FL
Rate: $DOE
Duration: 12 months
Input Date: 12/05/2017
Last Updated: 10/17/2018
Firm Name: CHIPTON ROSS
Attention: Robert Davis
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: rdavis@chiptonross.com
Website: www.chiptonross.com

Guidance, Nav & Ctrl Eng - Level 4 (3) - FL - C

Description:
Chipton-Ross is seeking a Guidance, Nav & Ctrl Eng - Level 4 (3) for an opening in Orlando, FL.

RESPONSIBILITIES:
Guidance, Navigation, and Control (GNC) engineer position. Responsibilities include, but are not limited to developing and analyzing GNC algorithms, Inertial Tracking / Target State Estimation algorithms, and Navigation algorithms using various simulations. Experience designing closed-loop control systems and missile autopilot algorithms is a big plus. Develop and test 6-DOF simulation models and simulation builds, and perform flight software verification / hardware-in-the-loop (HWIL) integration tests. Perform development and performance assessment in the context of Integrated Flight Simulation (IFS). The candidate should have a strong controls background and an understanding of Optimal State Estimation techniques using Kalman filters. Must have C/C++, and, MATLAB programming experience.
EDUCATION:
Bachelor's Degree, or higher, from an accredited University and at least three (3) years experience working GNC related assignments.

PREFERRED EXPERIENCE:
RF/EO Modeling, Mission Planning, Common Simulation Framework (CSF), and / or Simulink and FORTRAN experience is a plus

WORK HOURS:
9/80, 1st Shift, Full-Time

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 166660
Job Location: Orlando, FL
Rate: Up to $65.62 DOE
Duration: 11 Months
Input Date: 11/29/2017
Last Updated: 10/17/2018
Firm Name: CHIPTON ROSS
Attention: Kevin Suk
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: ksuk@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
HSE Software Engineer - MD

Description:
Roles and Responsibilities
• Responsible for design and implementation of software according to product requirements
• Socialize designs with team & integrates suggestions & changes as appropriate
• Unit test software components to ensure module-level functionality & data structure consistency
• Participates in design & implementation/code reviews of other team members
• Work with implementation teams to derive & document appropriate designs for the problem space
• Provide documentation as appropriate including design documentation, inputs for external specifications; system requirements specifications & end user documentation
• Independently manages time & prioritizes tasks to achieve results within cost & schedule constraints
• Resolves issues found during engineering test in a timely manner, taking risk into account
• Consistent use of group tools for tracking of defects & management of code
• Implement code in a timely fashion & with high quality, consistent with standards for the group

Qualifications and Education Requirements
• 4 or more years of experience
• Proven experience in large complex software/hardware developments, many years of embedded development.
• Expert in C and C++
• Several years exp. using embedded Linux (kernel and user levels) or like RTOS
• Several years exp. utilizing pthreads, understands & uses IPC & synchronization methods
• Understands & have successfully utilized OO approach on one more large software & hardware projects
• Understands basic networking protocols such as TCP/IP, UDP, ARP & ICMP
• High-level knowledge of company's software development design procedures & objectives
• Excellent organizational, decision making & communication skills
• Prior experience in the technological spaces the work requires
• Active DoD Secret clearance required
• U.S. Citizenship is required

Preferred Skills
• Understanding of network security protocols & algorithms (e.g. 802.1x, IPSec, IKEv2, SSL, encryption, EAP-TLS, SSH, SFTP, HTTPs, OpenSSL, X.509 Certificates, etc.)
• Crypto, PKI, CMS, & KMI experience
• Control plane implementation for high speed Ethernet based Network Appliances
• Control plane processor exp.
• Ethernet exp., layer 1, including MACsec
• CLI, SNMP, MIBs exp. for device mgmt
• Multicore Control plane processor exp.
• GDB
• Exp. with static code analysis tools such as Coverity
• Exp. with Python and Bash Shell Scripting
• Exp. with Continuous integration servers such as Jenkins
• Exp. with software system architecture and requirements definitions

Required Education:

• Bachelor’s Degree in Computer Science, Computer Engineering, Electrical Engineering, or related field; advance degrees in these areas preferred

U.S. Citizenship status is required as this position needs an active U.S. Security Clearance as of day one of employment
 
Job Number: KM0006
Job Location: Annapolis Junction, MD
Input Date: 04/10/2018
Last Updated: 04/30/2018
Firm Name: MIDCOM CORPORATION
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
HVAC Controls Engineer

Description:
Our client is looking for a HVAC Controls Engineer to join the team!!


Job Description:

Under general direction,
responsible for the design, configuration, and operation of complete building control systems including fire, security, and other low voltage
control sub-systems (ie lighting, nurse call, data networks, etc) to meet the intent of the project
requirements. Accountable to field teams for quality, timeliness and efficiency of designs.
Develops complex software programs, commissions and troubleshoots to ensure proper operations of
the building control system. Provides detailed information and submittals to communicate
design and operation to customers, consultants, the field
installation team and subcontractors.

Main Duties

1. Designs and configures technically complex building control systems as
defined by the contract documents. Creates flow diagrams, sequence of operations, bill of
material, network layouts and electrical schematics as required.

2. Develops and tests software programs necessary to operate the system per the
intent of the project requirements.

3. Coordinates the creation of necessary drawings and equipment schedules for
submittals and installation.

4. Selects, orders, and tracks the delivery of materials for assigned projects.
Coordinates factory-mounting processes to meet factory and project schedule.

5. Assists in the loading and commissioning of all system and network-level controllers
as required. Assists in validation of complete system functionality and
troubleshoots problems with subcontractors and other trades to ensure proper operation.

6. Provides field change information to the project team for the creation of
as-built drawings and software.

7. Keeps management and contractor or customer informed of job progress and
issues.

8. Assists in performing site-specific training for owner/operator on the total
building control system.

9. Participates in release meeting with project field team. Performs value
engineering to provide cost effective results while maintaining customer satisfaction.

10. Adheres to safety standards. High degree of regard to employee and
subcontractor safety.

REQUIREMENTS:


Bachelor’s Degree in Engineering with a minimum of three years experience, or
an associate degree in a related technical field with five years of relevant work
experience required.

Demonstrated knowledge of the construction or HVAC industry.
Demonstrated
knowledge of control theory, automatic temperature controls, building automation systems and
other building subsystems.
Demonstrated experience in the integration of low voltage building
sub-systems using various industry protocols (i.e. LON, BacNet, etc).
Ability to relate
technical knowledge to a non-technical audience.
Demonstrated advanced computer skills required,
particularly computer-related drafting tools.
 
Job Number: 4787
Job Location: Cincinnati, OH
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6 months
Start Date: ASAP
Input Date: 04/13/2018
Firm Name: OLSA RESOURCES INC
Attention: Dina
Address: 3836 N BALLAST ST
City, State: PORTLAND, OR 97217
Phone: 503/608-7895
Fax Phone: 503/608-7896
Website: www.olsaresources.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Help Desk Operations Level 2 (REQUIRES ACTIVE SECRET CLEARANCE)

Description:
Help Desk Operations Level 2 (REQUIRES ACTIVE SECRET CLEARANCE)

Location: Lexington, KY
Pay Rate: DOE ($30/hr - $40/hr)
Duration: 6 month W2 contract
Travel: Yes, US only, military installations
Shift: First, 5/40, exempt OT
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**
**MUST have an ACTIVE DoD SECRET CLEARANCE; INTERIM CLEARANCE SUFFICIENT**

Description
-Entry to mid level career position. Ideal candidate will have experience in a customer service support role.
-Position will support logistic / supply chain / acquisition web site application users spread over the continental US as well as overseas locations.
-Candidate will work closely with software and system engineers to design, test, deploy, and troubleshoot web applications for a Department Of Defense customer supporting Special Operations Command.
-Written and oral communication skills are critical.
-This is not a remote position.
-Business takes place at 5749 Briar Hill Road in Lexington, Kentucky.
-Candidate can start with an interim clearance.
-No personal portable electronic devices (e.g. cell phones) are allowed into the building where business takes place.

Skill/Experience/Education (Mandatory):
-Tier 1 Customer Service Support (1-3 years' experience required)
-Oral and Written Communication / Good to Excellent Grammar

Desired:
-Basic knowledge of relational databases and the ability to write standard SQL statements (1-3 years' experience desired) – (Basic SQL Query Knowledge)
-CompTIA Security+ certificate (desired)
-User Story Creation
-Agile SDLC Experience
-Technical Writing
-Software Testing
-Software Training
 
Job Number: 8673
Job Location: Lexington, KY
Rate: 30-40
Per Diem: Split Possible
Overtime: Exempt
Duration: 6 mos
Start Date: ASAP
Input Date: 02/22/2018
Last Updated: 08/06/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
IT Apps Designer

Description:
Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Duration: Long Term W2 contract
Shift: 1st Shift
Per Diem Split: Yes (if eligible)
Overtime: Possible

****MUST BE A U.S. CITIZEN****

Required Skills:
- Must have at least 2 years of Salesforce Administrator experience
- Must have experience collaborating with a Salesforce.com development team
- Prefer candidate with experience configuring a new implementation
- Prefer candidate with Salesforce Administrator certification

Education and Experience Requirements:
Bachelor's Degree in Information Technology, Computer Science, Engineering or relevant curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job and 6 years experience as an IT professional with broad experience across multiple IT disciplines or 4 years specific system configuration, development and deployment experience.

Position Purpose:
Designs, develops, tests and implements application software including client, server and middleware. This includes designing and building algorithms and data structures and application performance monitoring and tuning.

Principle Duties and Responsibilities:
Essential Functions: 1. Creates software design at the component level based on the application architecture and the detailed business requirements. 2. Develops algorithms and data structures 3. Develops strategies for the monitoring, preventive maintenance and disaster recovery of applications. 4. Serve as technical expert in at least one application within a portfolio. 5. Assures that solution designs meet requirements for scalability, performance and quality in accordance with negotiated service level agreements. 6. Participates in the assessment and resolution of software defects. 7. Assists project management with the development of work breakdown structures, project plans and skills required. to develop and implement applications. 8. Participates in design reviews for implementation projects. 9. Conducts technical evaluations. 10. Participates in the review, business case development and implementation of software development tools, methodology and software development standards. 11. Understands IS Security measures and current standards, practices and technology.

Additional Functions: 1. Serves as liaison with suppliers for sustaining activities. 2. Assists with evaluation and recommendations regarding purchased software packages, and supporting services. 3. Using knowledge of technology and existing systems, mentors junior staff on building and maintaining application systems. Perform other duties as assigned.

Other Requirements: 1. Expert in one or more software development languages. 2. IT Infrastructure Library (ITIL) exposure is desired. 3. Solid understanding of system lifecycle methodologies, software development tools and standards. 4. Experience working in teams. 5. Proficiency with an Integrated Development Environment (IDE) desired. 6. Proficiency with MS Office. 7. Ability to solve problems quickly and completely. Ability to identify tasks which require automation. 8. Strong inter-personal and communication skills; must be capable of explaining complex procedures in writing or verbally. Must be able to write proposals and make presentations to internal customers and professional peers. 9. Provides technical direction for application development teams. 10. A Masters degree may be used to offset one year of experience; PhD may offset two years of experience.

A credit history check from a national credit bureau will be conducted for all candidates for this position including new hires and current employees seeking promotion or transfer.
 
Job Number: 8913
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 07/26/2018
Last Updated: 08/06/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
IT Applications Developer II

Description:
IT Apps Developer II

Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term W2 Contract
Shift: First

Unique Skills:
Experience in SharePoint 2013, and design and implementation of workflows for business processes. Development in Nintex, InfoPath or SharePoint designer experience.

Education and Experience Requirements:
Bachelor's Degree in Information Technology, Computer Science, Engineering or relevant curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Four (4) years of experience in IT applications to include design, development, test, and maintenance experience in mainframe or server based technologies.

Position Purpose:
Responsible for developing code in support of new application functionality or defect remediation according to design specifications. Works independently on difficult assignments that are broad in nature requiring originality and ingenuity with some latitude for unreviewed actions or decisions.

Principle Duties and Responsibilities/Essential Functions:
1. Codes and documents software programs in accordance with design specifications. 2. Provides guidance to application developers. 3. Creates unit and integration test plans. 4. Performs unit and integration testing. 5. Participates in peer code reviews. 6. Supports application deployment. 7. Understands IS Security measures and current standards, practices and technology.

Additional Functions:
1. Proactively identifies opportunities to improve existing methodologies, processes or other areas of application delivery performance. 2. Proactively communicates issues and status as required. 3. May contribute to software design development. Perform other duties as assigned.

Other Requirements:
1. Experience with software development methodologies, the software development lifecycle (SDLC), and best practices. 2. IT Infrastructure Library (ITIL) exposure is desired. 3. Experience working in teams. 4. Proficiency with an Integrated Development Environment (IDE). 5. Proficiency with MS Office. 6. Exercises problem solving and creativity when developing code, to create efficient, reusable software, which results in minimal maintenance. 7. Basic communications (oral and written and interpersonal) skills. Proven ability to develop effective relationships with peers and first level management. 8. A Masters degree may be used to offset one year of experience; PhD may offset two years of experience.
A credit history check from a national credit bureau will be conducted for all candidates for this position including new hires and current employees seeking promotion or transfer.
 
Job Number: 8847
Job Location: Savannah, GA
Rate: 58-63
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/30/2018
Last Updated: 04/24/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
IT Exchange Administrator

Description:
IT Exchange Administrator

Location: Orlando, FL
Rate: $50/hr
Duration: 6 Month W2 Contract, 9/80
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**

Duties:
A major aerospace company is looking for a temporary Exchange Administrator to act as email architecture specialist for IT systems across two geographic locations. This is a multi-tasking environment that demands customer service, communication, and organizational skills.

Skills:
Required:
Provides technical expertise in all areas of Microsoft Exchange and software/hardware interconnection and interfacing. Prepares network documentation, including operational instructions. Provide monitoring, maintenance and advanced support of Exchange across the enterprise. Participates in major network installations and upgrades.

Desired:
•7 years of overall experience preferred.
•Implements policies, procedures, and technologies to ensure Exchange server security through secure access, monitoring, control, and routine security evaluations.
•Manages Exchange database(s), antivirus applications, messaging filtering, and error log tracking.
•Recommends, schedules, and performs software patches, upgrades, and/or purchases. Ensures that Exchange server implementations comply with policies, standards, licensing agreements, and configuration guidelines.
•Ability to work overtime and weekends required on occasion
•Anticipates, mitigates, identifies, responds to, and resolves problems affecting email systems performance, efficiency, and availability.
•Understanding of MS Exchange 2016, Public Folder management, Archive Mail, Active Directory Group Policies, Microsoft PowerShell, Windows Server 2008 and 2012.

Education:
BS in Information Technology or related field

Required Skills:
ACTIVE DIRECTORY EXCHANGE MAINTENANCE MS EXCHANGE ORGANIZATIONAL SKILLS
 
Job Number: 8885
Job Location: Orlando, FL
Rate: 50
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 04/09/2018
Last Updated: 06/04/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
IT Sr. Mobile Developer

Description:
IT Sr Mobile Developer

Location: Savannah, GA
Pay Rate: $63/hr - $66/hr
Duration: Long Term W2 Contract
Shift: First

Unique Skills:
iOS and android native app development skills. ( Swift, Objective C, Java, HTML, NodeJS ) Experience with Xcode IDE, code repositories (Git), understanding of creating and consuming APIs. Prefer knowledge with JavaScript and React or Angular.

Education and Experience Requirements:
Bachelor's Degree in Information Technology, Computer Science, Engineering or relevant curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eight (8) years of experience as an IT professional with broad experience across multiple IT disciplines.


Position Purpose:
Designs, develops, tests and implements complex enterprise applications software including client, server and middleware. This includes designing and building complex algorithms and data structures and application performance monitoring and tuning.

Principle Duties and Responsibilities/Essential Functions:
1. Creates complex software design at the component level based on the application architecture and the detailed business requirements. 2. Develops complex algorithms and data structures 3. Assists with the translation of logical data design to physical database design. 4. Develops strategies for the monitoring, preventive maintenance and disaster recovery of complex applications. 5. Serves as technical expert in one or more applications within a portfolio. 6. Assures that solution designs meet requirements for scalability, performance and quality in accordance with negotiated service level agreements. 7. Participates in the assessment and resolution of complex software defects. 8. Assists project management with the development of work breakdown structures, project plans and skills required. to develop and implement applications. 9. Participates in design reviews for implementation projects. 10. Conducts technical evaluations. 11. Leads the review, business case development and implementation of software development tools, methodology and software development standards. 12. Understands IS Security measures and current standards, practices and technology.

Additional Functions:
1. Serves as liaison with suppliers for sustaining activities. 2. Assists with evaluation and recommendations regarding purchased software packages, and supporting services. 3. Supports management in recruiting and hiring 4. Using knowledge of technology and existing systems, mentors junior staff on building and maintaining application systems. Perform other duties as assigned.

Other Requirements:
1. Expert in one or more software development languages. 2. IT Infrastructure Library (ITIL) exposure is desired. 3. Solid understanding of system lifecycle methodologies, software development tools and standards. 4. Experience working in teams. 5. Proficiency with an Integrated Development Environment (IDE) desired. 6. Proficiency with MS Office. 7. Ability to solve problems quickly and completely. Ability to identify tasks which require automation. 8. Strong inter-personal and communication skills; must be capable of explaining complex procedures in writing or verbally. Must be able to write proposals and make presentations to internal customers and professional peers. 9. Provides technical direction for application development teams. 10. A Masters degree may be used to offset one year of experience; PhD may offset two years of experience.
A credit history check from a national credit bureau will be conducted for all candidates for this position including new hires and current employees seeking promotion or transfer.
 
Job Number: 8848
Job Location: Savannah, GA
Rate: 63-66
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/30/2018
Last Updated: 07/18/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Infrastructure Engineer -Secret Clearance

Description:
PDS Tech, Inc is seeking a candidate for the Infrastructure Engineer- Secret Clearance position located in Aurora, CO.  
You will be responsible for deploying and integrating scripts and recipes to automate Systems configurations and COTS configurations in complex server environments.
These environments, a mix of servers, workstations, and custom hardware, provide the backbone for the operational system of a critical, strategic national asset.
The environments also support product development, testing, and maintenance.
The candidate would be responsible for implementation of automation recipes (Chef) and scripts (Ruby, PowerShell, Python and others) as part of an automated installation process.
The ideal candidate will be a self-starter, have an engineering mindset, and be able to troubleshoot complex problems.
This position may require some on call support and overtime as well as limited (<20%) travel for installation and troubleshooting support.
US citizenship is required due to the candidate needing a current US secret security clearance.
Requirements:
•Must possess an active US DoD Secret or higher clearance US Citizenship
•For G09 = 6+ years of relevant Infrastructure/IT experience related to system installation and configuration
•Background in Systems Operations environment supporting complex environment deployment and management activities
•Experience with automation tools such as Chef (preferred), Puppet, Ansible, SaltStack, Fabric or similar products for O/S builds, software installation and configuration •Hands-on experience with virtualization tools and cloud computing, either private (VMware, OpenStack) or public (AWS)Systems integration experience
•Ability to troubleshoot complex configuration problems or system issues
•Experience with Windows or Linux System Administration
•Strong scripting skills (i.e. PowerShell, Python, Ruby, bash, etc.) •
Ability to communicate clearly and effectively both written and oral

Desired Skills:
•Experience with orchestration tools – Rundeck, VMware Orchestrator
•Understanding of Infrastructure as Code and demonstrated implementation
•Understanding of DevOps concepts •Experience with VMware– vCenter, ESXi, vSphere
•Understanding of Change Management processes - Version Control of software and code - GIT, CVS •The ability to effectively plan their own work up and the work of others on the team\

Required Education:
Bachelor Degree in Information Systems, Information Technology, Management Information Systems, Computer Science, Computer Engineering, Computer Information Systems, Computer Systems Engineering and six years of related work experience or equivalent combination of education and experience (technical Bachelor Degree = additional 8 years of related work experience).
 
Job Number: 1710077409
Job Location: Aurora, CO
Duration: 12 months
Input Date: 11/09/2017
Last Updated: 10/17/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Jason Andrzejewski
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Email: cecjnrt@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000023QJBAA2&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Java Software Development Lead (Secret Clearance)

Description:
Description:
We are seeking a Lead Software Engineer to join a team of world-class engineers supporting PMA-231 and E-2D ALE Systems. The ideal candidate shall be knowledgeable about the software development life cycle (SDLC) and be able to adhere to coding standards, follow team established software development processes, and use established configuration management technologies.

The successful candidate will:
• Develop software on off-board laptop system for maintenance, support, and analysis in addition to adding new capabilities and correct faults and errors in processing of E-2D platform mission data
• Conduct multidisciplinary research and collaborates with equipment designers and/or hardware engineers in the planning, design, development, and utilization of electronic data processing systems
• Determine system user needs; analyze system capabilities to resolve problems on program intent, output requirements, input data acquisition, programming techniques and controls; prepare operating instructions; design and develop compilers and assemblers, utility programs, and operating systems while ensuring software standards are met
• Represent the organization as a technical contact on contracts and projects, and interact with leadership and suppliers
• Use innovative thinking to develop technology strategies and enhanced capabilities of software products
• Use expertise to develop technical solutions to problems and clearly present technical approaches and findings

MINIMUM QUALIFICATIONS:
• Participate in the full software development life cycle
• Knowledgeable with Object oriented programming
• Experience with Java, JSP, XML, and/or JavaEE development environments (Eclipse IDE)
• Experience with Windows and Windows-based applications, knowledge of Apache Tomcat Web Development
• Strong software lifecycle management experience
• Knowledgeable with configuration management tools such as Jira or Team Foundation Server (TFS)
• Strong verbal and written communication skills
• Ability to work independently within a team environment and multi-task in a fast-paced environment with strict attention to detail
• Ability to obtain and maintain security clearance

DESIRED QUALIFICATIONS:
• Experience with project management and/or Scrum/Agile tools (MS Project, Visio, etc.)
• Industry certifications are highly desired (CISSP, Security +, CSM, PMP, etc.)
 
Job Number: 18-04383
Job Location: Lexington Park, MD
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 Month+
Start Date: ASAP
Input Date: 03/27/2018
Last Updated: 04/10/2018
Firm Name: NESCO RESOURCE
Attention: Cody Grimes
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

Software Engineer - contract work - AZ

Description:
Developing
(1) network client/server software
(2) Distributed Systems
(3) TCP / UDP communication protocol.]
The position requires someone who’s actually done software development focused in the areas that are captured above.
C++ development.
Should be familiar w/ UML.
-Knowledge of WindRiver Simics or Perl will be considered a plus.

Role/Duties:
Design, develop and test spacecraft simulation software.
Debug and diagnose software in a lab environment.
Coordinate with engineering peers of other disciplines to develop software models of hardware components, support software integration activities and resolve interface issues.
The candidate must work in a team setting but should be able to independently and efficiently manage their time to complete assignments in a dynamic, schedule-driven environment.
 
Job Number: 205878
Job Location: AZ
Rate: 50-75 / hr
Per Diem: YES
Overtime: Possible
Duration: 12 months
Start Date: 2/3 weeks
Input Date: 05/29/2018
Last Updated: 10/17/2018
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: davellino@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Engineer

Description:
The primary task of this person will be to review manufacturing non-conformances and establish appropriate dispositions for these parts and assemblies. Competency in first order design and analysis principles is a must. Ability to utilize CATIA V5 is desired. Experience with various composite material systems is desired.
Knowledge of air vehicle systems, systems integration, engineering design, the drawing release process, and subsystems/component qualification
Working knowledge and experience integrating various mechanical systems into a composite aircraft.
Familiarity with composite fabrication processes
Review and provide engineering technical disposition of non-conformance notifications related to metallic and composite parts/assemblies
Skilled in “equivalent strength” principles
Participation in product Corrective Action Board (CAR) reviews

Requirements
B.S. degree in Mechanical, Aerospace, or similar engineering discipline is required
At least 5 years of relevant industry experience
Experience with CATIA V5 strongly preferred. SOLIDWORKS or equivalent will be considered in lieu of CATIA.
Experienced design (broad based aircraft experience) with knowledge of design manufacturing tolerances for production of components using GD&T
Experience with Product Lifecycle Management tools (PLM software), Requirements management tools and configuration management
Excellent verbal and written communication, excellent computer skills including Microsoft Word, Excel, PowerPoint, and Matlab
Knowledge and experience with AS9100 a plus
Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, DO-160, military (MIL-STD-810) or NASA are highly desired
Experience with manufacturing based ERP systems a plus
Strong team player and ability to work independently with excellent organizational and problem-solving skills
Composite and metal design experience preferred
Understanding of MRB requirements & procedures
Extensive working knowledge of engineering drawings / requirements
NDT/Visual non-conformance disposition expertise
Experience with control & segregation requirements for non-conforming material
Familiarization with records accuracy & completeness (including data codes)
Ability to facilitate inadequate cause & corrective action resolutions
Familiarization with rework vs accept disposition risk assessments
Familiarization with final dispositions & re-submit codes
Experience should include creation of engineering dispositions for non-conformances for pressurized and non
pressurized metallic and non-metallic structures (fuselage, wing, empennage)
Experience should be in a production and/or schedule-driven environment
Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment
Strong written/verbal communication and interpersonal skills
Typically a 9-10 hour work day, with some scheduled weekend support required



ITAR Requirements
To conform to U.S. Government export regulations, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by ITAR (22 CFR §120.15) or eligible to obtain the required authorizations from the U.S. Department of State.


The Structures Company is an AA/EOE.
 
Job Number: 191
Job Location: CA
Rate: Up to $65.00-DOE
Duration: 9+ Month
Start Date: April
Input Date: 04/11/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
One of our best clients is seeking an experienced Manufacturing Engineer for a long term contract in Florida. Your expertise in supporting the design and manufacturing of cable assemblies make you the ideal candidate for this position. Click the job title above to find out more about this position and why it could be the perfect match for your next career move.

The ideal candidate for this position will perform the following tasks:
* Provide manufacturing engineering support to the build of electromechanical cable assemblies.
* Provide day-to-day support to manufacturing operations to ensure quality, cost and schedule goals are met
* Investigate, communicate, and solve design, producibility, and work instruction related assembly issues as required.
* Define optimal material and product flow within the production work cell, taking into consideration the unique requirements of each customer.
* Generate and maintain detailed assembly work instructions including narrative, diagrams, photographs, attachments, and linked documents.
* Support design change management activities.
* Perform and communicate nonrecurring engineering activities during production startup, which includes, writing work instructions, tooling and fixture design, development of machine automation programs as required, and configuration of the manufacturing bill of materials for manufacturability.
* Interface with technical counterparts in other organizations both within and outside Clearwater Operations.
* Must be willing to work 2nd shift

Mandatory Qualifications and Experience:
* Minimum 3 years manufacturing engineering experience in a technical role supporting the design and manufacturing of cable assemblies.
* Must have IPC 620 knowledge.

Desired Qualifications and Experience:
* Bachelors degree from an accredited University in Engineering.
* Experience or training with advanced manufacturing technology and automated equipment applications, particularly as it relates to cable assembly manufacturing; understanding of lean manufacturing principles and the use of statistical tools to solve problems.
* Strong technical understanding of cable assembly producibility and process flow.
* Specific experience with SAP and Solumina manufacturing execution system.
* Fiber optic cable manufacturing is a plus.

The ideal candidate for this position will possess the following skills and characteristics:
* Strong interpersonal skills and demonstrated ability to work with coworkers and others from diverse backgrounds.
* Proven ability to effectively communicate through written and oral means, and to multitask by handling multiple assignments in parallel.
* Mechanical and electrical aptitude, and the ability to quickly learn new software applications.
* Experienced user of Microsoft office software applications including MS Word, Project, Excel, Visio, and Power Point.
* Ability to read and interpret Engineering Drawings.
* Willingness to work overtime and during off days occasionally as required to support production operations.
* Must be willing to work 330pm to 1am.

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 127636
Job Location: Pinellas Park, FL
Start Date: ASAP
Input Date: 04/16/2018
Last Updated: 04/19/2018
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Essential Job Functions:



· Coach/train less experienced engineers in Manufacturing Engineering.

· Monitor/improve the capabilities of the Manufacturing Engineers. Assist with projects/task when necessary.

· Technically review manufacturing engineering deliverables and help guide those on the technical career path.

· Provide manufacturing engineering solutions in the areas of process planning, and shop support activities.

· Drive internal and supply base activities related to Statistical Process Control, Capacity Assessment, First Article Review, Risk Assessments, PFMEA, and Gage R&R studies to meet QuEST’s customers’ quantity and schedule demands

· Provide engineering support to our customer’s (and their supplier’s) manufacturing/assembly organizations to troubleshoot and resolve technical problems.

· Participate in part valuation model creation and validation

· Drive improvements in all related manufacturing processes, including those related to products, equipment, and product quality for customers



Secondary Job Functions:

· Support project management and program management to quote and close work packages

· Develop work instructions and trainings to implement best practices / lessons learned and ensure repeatability

· Assist in interviewing and hiring new resources



Specialized Knowledge / Skills

· Experience with creating training material or work instructions desired

· Experience coaching entry-level engineers is preferred

· Experience with various manufacturing processes such as turning, 3-5 axis milling, grinding, broaching, special processes, and sheet metal/fabrications.

· Well versed in engineering & manufacturing drawings.

· Expert in interpreting GD&T standards (ASME Y 14.5).

· Knowledge in Measurements system analysis (MSA).

· Hands on experience in various machining, involving CNC and conventional methods and assembly techniques.

· Experience in the Solumina software.

· Familiarity with CMM and CAM offline/ Online programming.

· Knowledgeable in methods of inspection & Gauging concepts.

· Data collection and Analysis using QC tools and other SPC techniques (Control Chart, Control Plan, Design of Experiment, Gage R&R, KPCs, PFMEA, Process Capability Indices, Process Mapping)

· Experience/knowledge in APQP, PPAP, LEAN & 5S management

· Exposure to Aero/ Auto industry is preferred

· Familiar with aerospace/auto quality requirements (AS9100, OSHAS, TS 16949, various ISO)

· Familiar with NADCAP programs for Aero space (Civil & Defense) parts



Education, Training, and Experience

· BS/AS in Manufacturing, Mechanical, or Industrial Engineering

· Minimum hands on experience in Manufacturing Engineering 4+ years
 
Job Number: Man 01
Job Location: Lafayette, IN
Rate: Open
Per Diem: Yes
Overtime: Yes
Duration: LT
Start Date: ASAP
Input Date: 04/20/2018
Firm Name: QUEST GLOBAL SERVICES
Attention: Akshay Adya
Address: 111 FOUNDERS PLAZA STE 1700
City, State: EAST HARTFORD, CT 06108
Phone: 860/726-7025
Website: www.quest-global.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Savannah, GA
Rate: $50-$55
Long Term contract
1st Shift



Unique Skills:
Knowledgeable with CATIA, SAP, Solumina software programs. Aircraft experience with aircraft shop support and creating work instructions.


Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.


Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 8217
Job Location: Savannah, GA
Rate: $50.00 -$55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 03/21/2018
Last Updated: 04/24/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Material Quote Analyst

Description:
Our client, a market leader and technology innovator, is seeking talented professionals to deliver cutting edge solutions to their customers. Well-respected, with a global presence, our client consistently offers a powerful and robust portfolio of products, services and solutions that help customers successfully execute their missions in today’s dynamic environment. With unsurpassed engineering, using an open systems approach, our client solves the nation’s most complex challenges while foreseeing future needs.

Material Quote Analyst
(US Citizenship Required*)
Taunton, MA
2018-5770

Responsibilities:
• Focus on completing tasks or activities in compliance with policies and procedures
• Support proposal activities to meet Program needs and requirements
• Review and analyze purchase requisitions
• Coordinate purchasing activities with internal partners to acquire products and services in a timely, cost effective manner
• Process purchase requisitions, purchase orders & revisions, and requests for quotes to suppliers
• Receive minimal instruction on daily work; general instructions on new assignments
• Develop and maintain resources for assigned commodity items
• Prepare standard requests for quotation
• May support pricing revisions, order cancellations, discontinued items, acceptable substitutes, delivery date revisions, and invoice discrepancies
• Provide administrative support directly related to supply chain department activities, managers and staff
• Maintain files, logs, records of invoices, purchase orders and other related documentation

Qualifications:
• Work on assignments requiring considerable judgment and initiative with supervisor input where required
• Considerable ability to apply knowledge, creativity, and skill to complete specialized tasks
• Determine tasks, priorities, and goals within the scope of the position; able to independently handle associated routine activities
• Considerable understanding of the job; applies knowledge and skills to complete a range of tasks
• Require decision-making but with minimal financial implications to the company
• Strong administrative and problem-solving skills
• Strong computer skills, proficiency with MS office and other software tools
• Good interpersonal and communication skills, verbal and written
*US Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• High School Diploma or equivalent is required plus a minimum of 6 years of relevant experience

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-5770
Job Location: Taunton, MA
Input Date: 04/04/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Bradley Davis
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Knowledge and proficiency with a model/drawing data management tool, Windchill. A general understanding or experience with manufacturing engineering and fabrication processes. Familiarity with Microsoft Office Applications. An active DOD Secret Clearance (with background performed within 5-years) is a plus.

10 years of equivalent experience, and 6-8 years of Computer Aided Design software experience using PRO Engineer (PTC CREO3). Candidate must be capable of creating and interpreting detail, assembly, and installation type drawings, and have knowledge of the concept of tolerance analysis and Geometric Dimensioning and Tolerancing (GD&T).
 
Job Number: 41941
Job Location: TX
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 06/14/2018
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
An active DOD Secret Clearance is a plus.

Computer Aided Design software experience using PRO Engineer (PTC CREO2 or 3) and/or CATIA V.5. Candidate must be capable of creating and interpreting detail, assembly, and installation type drawings, and have knowledge of the concept of tolerance analysis and Geometric Dimensioning and Tolerancing (GD&T).
 
Job Number: 41695
Job Location: FL
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 07/23/2018
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer - Level 3

Description:
Location: Eglin AFB, FL
Rate: $35.00 - $55.00/HR
Duration: 6+ month contract
Shift: 1st Shift
Overtime: Exempt

****MUST be a U.S. Citizen****
****MUST have an Active Secret Clearance or have had one within the last 2 years****

Description
CANDIDATES WITH ACTIVE SECRET CLEARANCE ONLY. This job involves designing modifications for post production C-130 and potentially other fixed-wing aircraft by designing installations, integrations, modified parts, assemblies, and systems based on customer specifications. This position will interpret customer requirements then research, develop and document mechanical designs using applicable military specifications, ANSI/ASME or related design and drafting standards.

Skill/Experience/Education
Mandatory:
- Familiarity with ANSI/ASMEY14.100 or similar design and drafting standards
- Experience with Catia V5 3D parametric modeling and drafting
- Perform detailed drawing checks and be responsible for completion of production ready drawings
- Ability to work under little or no direct supervision
- Demonstrated previous success working in a team based environment to meet objectives
- Active DoD secret clearance

Desired:
- Any familiarity with structure of C130 aircraft, specifically C130J
- Air Force customer experience
- Experience or familiarity with engineering change documentation
- Experience with Teamcenter PLM software
 
Job Number: 9636
Job Location: Crestview, FL
Rate: $35.00 - $55.00/HR
Per Diem: Split Possible
Overtime: Exempt
Duration: 6+ mos
Start Date: ASAP
Input Date: 08/29/2018
Last Updated: 08/29/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
Mechanical Engineer (Rotating Machinery) to join our development team. . As a key contributor, you will work within the Drivetrain group to design, analyze, and participate in system integration activities for the products road-mode drivetrain.



Job Responsibilities:



• Design, analysis, and system integration activities for flight-mode drivetrain, including:

• Mechanical loads definition;

• Engine-to-propeller power transmission;

• Engine-Generator mechanical coupling;

• Material selection for durability and low weight;

• Propshaft, couplings, and shaft-driven rotating accessories;

• Integration of the flight-mode drivetrain with the airframe structure.

• Participate as a key player in the design-build-test process, including conceptual, preliminary and detailed design, requirements definition, design reviews, prototyping, and testing;

• Coordinate and communicate effectively with other engineers, technical personnel, management, and external suppliers;

• Provide CAD work in support of design activities, direct drafting and product definition staff in the application of manufacturing drawing best practices, and define appropriate GD

• Perform analyses, via hand calculations and FEA, to validate designs;

• Support and participate in testing activities as needed, including test plan creation, data analysis, and test report generation and documentation;

• Support the Certification Director with compliance and certification activities including design, test, and analysis documentation, internal and external audits, and other activities as needed.





Qualifications:



• The candidate must have:

• A Bachelor's degree in Mechanical, Automotive, or Aerospace Engineering and 5+ years technical work experience, or;

• Master's degree in Mechanical, Automotive, or Aerospace Engineering and 3+ years technical work experience.

• Advanced SolidWorks experience; • Proven experience in rotating machinery/drivetrain design;

• Familiarity with established design techniques to mitigate rotating imbalance;

• Expertise performing static and/or modal analyses for mechanical systems;

• Experience with finite element analysis in SolidWorks Simulation or an equivalent embedded FEA tool;

• Proven definition or production of manufacturing drawings including selection of dimension tolerances;

• Familiarity with material selection to meet strength, weight, durability, and cost targets;

• Proven experience with rapid design cycles: taking a design from concept through detailed design, build, and test;





Highly Desired Qualifications:



• Hands-on experience (work or personal) with rotating machinery assembly/disassembly;

• Proven ability to select appropriate bearing types/sizes, shaft splines, and mechanical couplings for drivetrains;

• Formal training and professional experience with Geometric Dimensioning and Tolerancing (GD • Background in designing with aerospace grade materials including fiber reinforced composites;

• Exposure to ANSYS Workbench, FEMAP/NASTRAN or any similar sophistication FEA software;

• Exposure to low or medium volume production environments, particularly in automotive or aerospace industry;

• Familiarity with ASTM F2245 regulations;

 
 
Job Number: 18-13398
Job Location: Woburn, MA
Rate: 105000.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2018-04-04 00:00:00.0
Input Date: 04/04/2018
Last Updated: 05/07/2018
Firm Name: NESCO RESOURCE
Attention: Dan Regan
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
Mechanical Engineer needed for an immediate full-time opportunity with our client in the Burlington MA area. 



Job Summary 

We are currently looking for a world-class Mechanical Engineer (Mechanisms) to join our development team. Candidates should be self-starters who bring positive attitude, integrity, and enthusiasm to our team as we transform personal transportation.



Job Responsibilities 

  • Design, analysis, and system integration of the throttle and gear selection controls, including:

  • Combining mechanical and throttle-by-wire engine control mechanisms;

  • Developing the gear selection mechanism to interface with the hybrid powertrain;

  • Defining mechanism degrees of freedom, latching states, and sensor interfaces;

  • Supporting sensor selection/integration for sensing commanded vehicle state;

  • Material selection and mechanism designs for durability, low weight, and simplicity;

  • Integration of the throttle and gear selection mechanisms with operator ergonomics.

  • Participate as a key player in the design-build-test process, including conceptual, preliminary and detailed design, requirements definition, design reviews, prototyping, and testing;

  • Provide CAD work in support of design activities, direct drafting and product definition staff in the application of manufacturing drawing best practices, and define appropriate GD&T;

  • Perform analyses, via hand calculations, kinematic simulations, and FEA, to validate designs;

  • Support and participate in testing activities – component, drive, and/or flight – as needed, including test plan creation, data analysis, and test report generation and documentation;

  • Support the Certification Director with compliance and certification activities including design, test, and analysis documentation, internal and external audits, and other activities as needed.


Qualifications:


  • Bachelor’s degree in Mechanical or Aerospace Engineering and 5+ years technical work experience, or;

  • Master’s degree in Mechanical or Aerospace Engineering and 3+ years technical work experience.

  • Advanced SolidWorks experience – including SolidWorks Motion tool;

  • Demonstrated experience designing robust, lightweight mechanisms for vehicles including operator controls;

  • Expertise performing static and kinematic analyses for mechanical systems;

  • Experience with finite element analysis in SolidWorks Simulation or an equivalent embedded FEA tool;

  • Proven definition or production of manufacturing drawings including selection of dimension tolerances;

  • Familiarity with material selection to meet strength, weight, durability, and cost targets;

  • Proven experience with rapid design cycles: taking a design from concept through detailed design, build, and test;

  • Outstanding organization, analytical, and problem solving skills;

  • Excellent written and verbal communication skills, as well as presentation skills;

  • Familiarity with basic shop tools (hand, power, mill, lathe, etc.).


Highly Desired Qualifications


  • Hands-on experience installing automotive/aircraft throttle mechanisms, gear selectors, or propeller controls;

  • Proven ability to select appropriate bearing types/sizes, implement latches, and design linkages;

  • Familiarity integrating Hall Effect sensors, proximity, or contact switches to sense mechanism state (position);

  • Formal training and professional experience with Geometric Dimensioning and Tolerancing (GD&T);

  • Background in designing with aerospace grade materials including fiber reinforced composites;

  • Exposure to ANSYS Workbench, FEMAP/NASTRAN, or any similar sophistication FEA software;

  • Familiarity with MSC Adams or similar sophistication rigid-body kinematics simulation software;

  • Exposure to low or medium volume production environments, particularly in automotive or aerospace industry;

  • Familiarity with 49 CFR 571 regulations;

  • Familiarity with ASTM F2245 regulations.



 
Job Number: 18-13347
Job Location: Burlington, MA
Rate: 105000.0USD/Year
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2018-04-04 00:00:00.0
Input Date: 04/04/2018
Last Updated: 05/07/2018
Firm Name: NESCO RESOURCE
Attention: Dan Regan
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Design Engineer

Description:
Aerospace mechanical systems engineer with experience in mechanical system design and manufacturing. The primary task of this role will be to do detailed design and systems layout work for vehicle integration. Additionally, the engineer in this role will be required to interface with structural analysis, manufacturing and maintenance teams.
Helps develop and refine requirements for the mechanical systems based on customer requirements
Evaluates data from the prototype program for verification and validation purposes and identifies further testing or development work
Reviews, updates, and compiles engineering definition of aircraft system components and assemblies
Establishes manufacturing tolerances for production of components using GD&T
Supports review of manufacturing plans and procedures to ensure compliance with design requirements
Supports the creation of system test plans which will be used to verify manufacturing processes meet design intent and requirements
Confers with management, engineering, and other staff regarding manufacturing capabilities, production schedules, and other considerations to facilitate production processes
Requirements
Bachelor’s degree in Mechanical or Aerospace Engineering from an accredited institution
Experience with CATIA V5
Experience in aerospace mechanical system design, assembly and test processes
Minimum of 5+ years relevant industry experience
Experience with Model Based Definition, GD&T skills through experience and/or formal training
Experience with Product Lifecycle Management tools (PLM software), Requirements management tools and configuration management
Excellent verbal and written communication, excellent computer skills including Microsoft Word, Excel, and PowerPoint
Strong team player with excellent organizational and problem-solving skills
Knowledge and experience with AS9100 a plus
Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
Experience with manufacturing based ERP systems a plus
Applicants must be U.S. persons as defined by the ITAR (22 CFR §120.15)


The Structures Company is an AA/EOE.
 
Job Number: 194
Job Location: Mojave, CA
Rate: Up to $65.00-DOE
Duration: 9+ Months
Start Date: ASAP
Input Date: 09/27/2018
Last Updated: 10/01/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Design Engineer

Description:
Seeking a Mechanical System Design Engineer

Aerospace mechanical systems engineer with experience in mechanical system design and manufacturing. The primary task of this role will be to do detailed design and systems layout work for vehicle integration. Additionally, the engineer in this role will be required to interface with structural analysis, manufacturing and maintenance teams.
Helps develop and refine requirements for the mechanical systems based on customer requirements
Evaluates data from the prototype program for verification and validation purposes and identifies further testing or development work
Reviews, updates, and compiles engineering definition of aircraft system components and assemblies
Establishes manufacturing tolerances for production of components using GD&T
Supports review of manufacturing plans and procedures to ensure compliance with design requirements
Supports the creation of system test plans which will be used to verify manufacturing processes meet design intent and requirements
Confers with management, engineering, and other staff regarding manufacturing capabilities, production schedules, and other considerations to facilitate production processes
Requirements
Bachelor’s degree in Mechanical or Aerospace Engineering from an accredited institution
Experience with CATIA V5
Experience in aerospace mechanical system design, assembly and test processes
Minimum of 5+ years relevant industry experience
Experience with Model Based Definition, GD&T skills through experience and/or formal training
Experience with Product Lifecycle Management tools (PLM software), Requirements management tools and configuration management
Excellent verbal and written communication, excellent computer skills including Microsoft Word, Excel, and PowerPoint
Strong team player with excellent organizational and problem-solving skills
Knowledge and experience with AS9100 a plus
Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
Experience with manufacturing based ERP systems a plus
Applicants must be U.S. persons as defined by the ITAR (22 CFR §120.15)

The Structures Company is an AA/EOE.
 
Job Number: 194
Job Location: CA
Duration: 9+ Months
Start Date: ASAP
Input Date: 04/13/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical/Structural Engineer

Description:
Project Overview: Our computational challenges are so big and unique we can't just buy our hardware, we've got to make it ourselves. Our Platforms Team designs and builds the hardware, software and networking technologies that power all of our services

Overall Responsibilities

The progress of the key responsibilities.
Work with cross organization team to develop mechanical and structural systems.
Prepare technical reports.
Communicate technical results to documentations and presentation.
Top 3 Daily Responsibilities: Evaluate new product designs, define structural requirements and design strategy based on applicable standards and guidelines,

Perform design/analysis calculations for structural steel, sheet metal assemblies, mechanical components with minimum or no supervision. Support interdisciplinary projects, manage multiple structural evaluations, provide cost estimates and communicate technical report and presentations and assist design team in

Required Qualifications:

Bachelors degree in Civil or Mechanical Engineering with an emphasis on structural design.
Minimum 3 years experience in Structural Engineering and related areas
Proficient knowledge of CADD tools (AutoCAD, Visual Analysis, STAAD/RAM, etc.) for efficient
production of engineering work.

Able to read design/construction drawings and be able to understand design narratives and
calculations

Strong communications skills - ability to work directly with internal and external teams
Design experience with structural steel, mechanical systems and components.
Self-motivated with ability to work in a team environment.
High level of attention to detail.
Nice to have

Masters degree in Civil or Mechanical Engineering with an emphasis on structural design. P.E. licensed Experienced with AISC Steel Manual, ACI 318, and ASCE 7. (This is a good pointer for nice to have)

Experience with AutoCAD, Creo or Solidworks.

Knowledge of Excel, and STAAD Pro (or other modeling software) a plus.

Exposure to construction means and methods.

Ability to meet required deadlines while simultaneously completing other tasks.

Experience working with other disciplines understanding their interface requirements.
 
Job Number: 385535
Job Location: Seattle, WA
Input Date: 04/02/2018
Firm Name: CDI CORPORATION
Attention: Jonathan Oleson
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
N/C Programmer - (WA)

Description:
Provides numerical control, machining and programming technical experience. Establishes technical requirements for manufacturing and producibility. Plans, creates, verifies and revises Machine Control Data (MCD), geometry and documentation that directs the operations for a complete spectrum of numerically controlled equipment required to manufacture and inspect parts, tools and assemblies for departmental work. Plans and guides the development and integration of new machining techniques and manufacturing methods, processes, software and equipment. Works under general direction. NC Programmer with the following skills:
1. 1+ year experience using MetrologXG version software to program Coordinate Measurement Machine (CMM)
2. Preferred: Experience programming dual armed CMM using Metrolog software
3. Skilled in knowledge and interpretation of Geometric Dimension and Tolerancing (GDT)
4. 2+ years working with CATIA (or other Model Based Definition (MBD) software to access released engineering models and interrogate them for GDT and calculated measurements

AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience. 1+ year experience using MetrologXG version software to program Coordinate Measurement Machine (CMM). Preferred: Experience programming dual armed CMM using Metrolog software.

ACS Group (formerly 'Comforce')
 
Job Number: NCpuyallup
Job Location: Puyallup, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 04/10/2018
Last Updated: 05/11/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Numerical Control Programmer 4

Description:
If interested then please share updated resume at ravi@iconma.com

Numerical Control Programmer 4

Location: Everett, WA
Duration: 6-7 months

Job Description:
Provides expertise in numerical control, machining, programming and Design For Manufacturing and Assembly (DFMA) in support of new and ongoing projects. Establishes technical requirements for manufacturing and producibility. Plans and guides the development and integration of machining techniques, manufacturing methods, processes, software and equipment to support the design, manufacture and inspection of parts and assemblies. Identifies equipment and approaches, coordinates and assigns work and trains/mentors others. Works under minimal direction.

- Must be a competent journeyman for post-cure (trim/drill)
- Must be very proficient with CATIA V5
- Composites experience is preferred, but not required

Education / Experience:
AA degree in related discipline and typically 6 or more years of related experience or an equivalent combination of education and experience.

Skill Code: 67J-Composites
 
Job Number: 18-03767
Job Location: Everett,, WA
Input Date: 03/06/2018
Last Updated: 04/16/2018
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/321-3508
800 Phone: 855/686-4768
Website: www.iconma.com

Office Manager

Description:
PDS Tech, Inc. is seeking an Office Manager in San Leandro, CA.  

Position Summary:  Responsible for effectively and proactively supporting the day-to-day relationship, administration and technical/product support of one or more assigned customer accounts. Additionally, the Customer Relations Associate will support internal teams on specialized projects such as pre- and post-election day support, new product implementations, and/or product upgrades/updates.
Job Responsibilities
  • Point person for mailing, shipping, supplies, equipment, bills and errands
  • Coordinate with IT department on all office equipment
  • Provide general support to visitors
  • Participate actively in the planning and execution of company events
  • Responsible for creating PowerPoint slides and making presentations
  • Proactively provide support to resolve customer product/service issues, escalating to appropriate internal resources and coordinating effective and appropriate solutions to meet customer needs.
  • Assist in the planning, organizing, and scheduling of resources as per customer’s Master Services Agreement for pre- and post-election day support and/or projects.
  • Contribute to the forecasting, planning, and coordination of additional customer service support activities and product requirements for current systems per customer’s Master Services Agreement.
  • Process product and service orders based on the customer’s needs, requirements, product warranties and/or customer contract.
  • Leverage effective project management skills to support and/or assist in the coordination of new product implementations.
  • Develop and deliver comprehensive end-user training and materials.
  • Collaborate with customers, and internal Operations and Engineering & Certification departments to provide timely and accurate information and feedback on improving end-user functionality.
  • Partnering with internal departments, contribute to the preparation and distribution of manuals, product brochures, and technical publications for customers.
  • Partner with customers and internal departments to support jurisdictional certification requirements, preparing and testing certification projects, and participating in the state certification processes.
  • Manage customer profile in SalesForce, ensuring current and accurate information.
  • Leverage understanding of the customer’s needs and expectations to collaborate with the Sales team to identify, develop, and implement strategic plans supporting ongoing sales of products and/or services.
  • Assists the Accounting and Sales departments with Accounts Receivables.
  • Other assigned responsibilities as needed or required.

Job Qualifications



·         Undergraduate degree in Computer Science/IT preferred, but not required



·         2-5 years of business experience involving account/relationship management in the tech and/or government industries



·         2+ years’ experience of demonstrated project management skills supporting complex technical product implementations.



·         Knowledge and understanding of the elections industry preferred, but not required.



·         Strong IT skills, both software and hardware.



·         Excellent verbal and written communication skills along with good presentation skills.



·         Strong organizational skills to include multi-tasking and time management skills.



·         Strong interpersonal skills and building business relationships.



Knowledge, Skills & Abilities



·         Knowledge of the sales process from establishing relationships, from qualifying the customer to closing the sale.



·         Knowledge of both hardware and software technology.



·         Ability to establish and maintain business relationships with customers.



·         Ability to analyze problems and identify potential solutions and preventive measures.


 
Job Number: 1810084279
Job Location: San Leandro, CA
Duration: 3 months
Input Date: 04/05/2018
Last Updated: 10/17/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Shannon White
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Email: cecjnrt@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mM3aAAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Oracle DBA

Description:
Our client, a market leader and technology innovator, is seeking talented professionals to deliver cutting edge solutions to their customers. Well-respected, with a global presence, our client consistently offers a powerful and robust portfolio of products, services and solutions that help customers successfully execute their missions in today’s dynamic environment. With unsurpassed engineering, using an open systems approach, our client solves the nation’s most complex challenges while foreseeing future needs.

Oracle DBA
(US Citizenship Required*)
Las Cruces, NM
2018-5819

Responsibilities:
• Ensure database reliability and availability with proactive management.

Qualifications:
• Required – active Secret clearance
• Must be able to work permanently out of Las Cruces
• 10-12 year’s work experience in Oracle database related position
• 6+ years of database administration experience as an Oracle DBA including experience supporting high-availability production databases
• Experience with production support of Oracle Databases and Exadata; experienced using Oracle Enterprise Manager for monitoring databases and Exadata
• Able to troubleshoot and resolve issues related to Oracle Real Application Cluster (RAC) databases 12c.
• Some administration experience with MySQL and SQL Server is preferred.
• Experienced with Exadata, including upgrading Exadata Software/Firmware
• Experienced with Oracle Real Application Cluster (RAC) databases
• Experienced with Oracle Automatic Storage Management (ASM) and ASM Clustered File Systems (ACFS)
• Experienced with DataGuard/Standby databases
• Experienced with Backup and Recovery of databases using RMAN including Disaster Recovery scenarios
• Experienced in troubleshooting database performance issues
• Must have excellent verbal and written communication skills
• Ability to think analytically
• Self-starter
*US Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's degree in computer science, information technology/related field is required plus a minimum of 8 years of relevant experience; or Master's degree plus a minimum of 6 years of relevant experience

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-5819
Job Location: Las Cruces, NM
Rate: Based on experience
Input Date: 04/12/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: jobs@moseleytechnical.com
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Power Electronics Design Engineer Specialist

Description:
Be a part of a fortune 500 Combat Systems group and a global leader in the design, development, production, support and enhancement of tracked and wheeled military vehicles. Our client has a 70 year defense heritage of providing a full spectrum of high quality, technically superior, high value products and services to the United States and its Allies. Their employees are dedicated to making the Company the World’s preferred supplier of land vehicles and weapons systems.

If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

Power Electronics Design Engineer Specialist
(U.S. Citizenship Required*)
Sterling Heights, MI
2018-5803

Responsibilities:
• As Power System Controls Engineer, responsible for vehicle power electronics hardware design.
• Develop vehicle power electrical and electronics specifications
• Design vehicle power electrical and electronic systems and components
• Design and analyze Electric Generators/Alternators and motors
• Design analog power circuits to include IGBTs, MOSFETs, etc.
• Assess suppliers’ power electronics designs for compatibility, operability, and adaptability for company-developed products
• Analyze and simulate vehicle power electronic capabilities
• Verify, tune, and validate controls, hardware, and software
• Troubleshoot controls, hardware, or software issues

Qualifications:
• Experience with analog circuit design which focuses on electronic hardware for control and/or power conversion systems
• Experience with resolving circuit functional and performance issues with analysis (e.g., frequency analysis), simulation (PSpice, MatLab, etc.), and testing
• Experience with high voltage power electronics circuit board schematic capture and layout (using Mentor Graphics, ORCAD, etc.)
• Experience with electrical machine/power conversion control theory & implementation
• Ability to occasionally travel (5%) including to Canada
*U.S. Citizenship is required by law, regulation, executive order, or government contract.


Education and Experience:
• Bachelor’s degree required, Masters preferred, with a minimum of 10 years applicable experience. Fewer years of experience will be considered with an advanced degree.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunities to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-5803
Job Location: Sterling Heights, MI
Rate: Based on experience
Input Date: 04/11/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Bradley Davis
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Aerodynamics Engineer

Description:
Must have experience with C++, LINUX,CATIA,FORTRAN,CFD

Responsibilities:
Aerodynamicist with P&HQ. Main Purpose of the Role is experienced cross-disciplinary engineer with experiences in aerodynamics, computational fluid dynamics, and thermal analysis. The candidate will build on an intimate knowledge of all aircraft systems and have the ability to support and develop new project initiatives.

Responsibilities:
• Support loads event simulation model development and validation of aerodynamic criteria for suborbital space missions
• Support pre-flight preparation including review of test limitations, flight test plans and procedures, flight readiness reviews, mission control room support, and post flight analysis
• Works with other engineering groups to ensure proper application of design and requirements
• Supports entry into commercial service by ensuring that regulatory and internal company requirements related to loads are met
• Develop standardized analysis and reporting tools
• Perform model updates from data collected during vehicle or component testing and data created with analytical tools
• Develop and maintain aerodynamic databases for use in analysis during all flight phases
• Develop and substantiate rational P&HQ criteria and requirements for unique vehicles with unconventional configurations
• Air Data Experience


Qualifications:
Professional Requirements
• Graduate degree in Aerospace Engineering, and/or equivalent, with minimum of 5 years of experience in aerodynamics development
• Experiences in wind-tunnel and flight test aerodynamic model validation
• Experience with full aircraft analysis – transonic required, supersonic and launch vehicle desirable
• Test plan development and data analysis experience a strong plus
• Experience in the conduct of flight test, including familiarity with standard flight test practices and safety processes strong plus.
• Working knowledge of aircraft and space systems and familiarity with relevant aerospace standards (FAA, FAA‐AST etc.)
• Advanced skills with Linux, Python, Simulink, MATLAB, Fortran, C, C++, and software development best practices.
• CATIA V5 experience preferred
• Experience with FUN3D, NSU3D, Pointwise, and/or similar RANS and gridding methods
• Applicants must be U.S. persons as defined by the ITAR (22 CFR §120.15)

The Structures Company is an AA/EOE.
 
Job Number: 142
Job Location: CA
Duration: 6-9 Months
Start Date: ASAP
Input Date: 04/17/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Support Engineer (17-207)

Description:
We are looking for a Product Support Engineer for this great opportunity in Eden Prairie, Minnesota. This role will provide tier 3 support on a broad scope of our products and services and will include multiple
areas of software analysis, design, and implementation within the development organization. With this comes an expectation that the individual will be functioning across numerous products, projects, and office boundaries –providing software support for enterprise level applications.

RESPONSIBILITIES:
Research and drive pragmatic solutions to complex problems taking short-term and long-term goals into consideration.
Maintain durable products that enable high-growth business strategies.
Maintains existing products through enhancements, bug fixes, and ongoing maintenance.
Conducts root-cause analysis to identify and correct any system issues.
Reviews and revises existing technical documentation for all products and technology areas to ensure all information is current.
Packages and tests applications in accordance with our standards and procedures.
Communicates with team members regarding troubleshooting process, progress, and completion.
Follows up with team members to ensure system issues have been completely resolved.
Develops relationships with outside vendors, service providers, and partners to drive system improvement.
Required Qualifications:
Bachelor degree in computer science or related technical discipline
C, C++,
C#.NET, Java
Java script, frameworks used such as Hibernate
MS SQL and Oracle database Stored Procedures
Preferred Qualifications:
Knowledge of telephony board, ie. Dialogic, AudioCodes
Work with Installers such as MSI
Working knowledge of Linux and WebLogic
Desired Qualifications:
Working knowledge of SIP technology
Working knowledge of Eclipse
Working knolwedge of Agile Methodology and agile tools such as Rally or Jira
Clinical or healthcare background
 
Job Location: Eden Prairie, WA
Overtime: Yes
Start Date: ASAP
Input Date: 04/03/2018
Last Updated: 04/10/2018
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Control Inspector

Description:
Hiring: QC Inspector to head South to Louisiana! The ideal candidate will have 2 years of experience performing electro/mechanical inspections! Do not miss the opportunity to gain experience with a great company!

The ideal candidate for this position will perform the following tasks:
* Inspection and test of parts, materials, components and systems in one or more of the following areas: Receiving, Shipping, Stores, Fabrication, Assembly, Testing, Calibration and/or X-Ray.
* Visually examines by means of instruments, gauges, jigs, templates or other measuring devices to include nondestructive test methods and/or x-ray to insure adherence to standards, specifications, drawing, etc.
* May operate standard calibration and test equipment.
* Rejects parts, materials, assemblies equipment, tooling or components which do not meet requirements.
* Performs and may assist/train other inspectors in inspections, non-destructive testing, x-ray, calibration and observations and functional testing (including electrical, electronic, mechanical, etc.)
* Reviews software data on vendor supplied items to determine acceptability. Generates Quality reports, completes Inspection Check Lists, nonconformance documents, calibration reports, x-ray and safety records and other Quality documents/records as applicable to the specific area assigned.
* Adheres to all safety requirements, departmental instructions and TMLS Policies and Procedures.
* Interface directly with all levels of the organization, suppliers and customers, as appropriate.

Qualifications and Experience:
* High School or equivalent education with technical/vocational training and related experience.
* 2 years experience performing electro/mechanical inspections, Level I Radiography/Radiation Safety certification, NDT training, or equivalent field experience.
* Must pass the required Eye exams for the NDT methods performed, as applicable.

The ideal candidate for this position will possess the following skills and characteristics:
* Able to read and understand drawings and specifications and to use a wide variety of precision measuring instruments.
* Must possess good written and verbal communication skills.

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 127617
Job Location: Slidell, LA
Start Date: ASAP
Input Date: 04/16/2018
Last Updated: 05/01/2018
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

Quality Engineer

Description:

PDS Tech, Inc. is seeking a Quality Engineer in St. Louis, MO. 

Job Responsibility



  • The Quality Engineer will provide day-to-day focus on the proper execution of actions necessary for the on-time delivery and first-time quality of products and services.
  • To provide technical and administrative leadership to ensure that performance and quality of products conform to established company, international and governmental regulatory standards, agency guidelines, and customer requirements by implementing and maintaining quality assurance policies, processes, procedures and controls.
  • Maintain the most recent interpretations of the quality system requirements and therefore ensure that documented practices meet the true interpretation of the quality management system standards.

Principal Accountabilities

  • Product Quality
  • Ensure that Quality Plans are current, and being executed for the programs assigned
  • Ensure that Quality Plans and supporting documentation such as Inspection Points, Statistical Process Control Plans, etc. are in place and being used to measure and monitor key process/product characteristics and interfaces.
  • Determine when process stability and capability studies should be performed on existing processes. Review and analyze results. Recommend changes to processes based upon findings and perform follow up to verify effectiveness.
  • Ensure that issues affecting product quality have effective corrective actions/micro plans in place that will result in resolution or risk mitigation plans are in place that will minimize product quality impact
  • Monitor the fidelity of associated inspection procedures to customer requirements and program specific quality plans
  • Ensure that plans/processes are in place and executed to minimize or eliminate product escapes.
  • Ensure that corrective actions have data and data analysis to effectively identify root cause, containment, interim and long-term corrective action planning and decisions, as well as quantifiable verification and monitoring exit criteria.
  • Analyze and provide material review dispositions for non-conforming materials, parts, and equipment.
  • Provide engineering support to operations ensuring consistent application of quality techniques
  • Resolve quality issues of capability, tolerance, and materials related issues.
  • Resolve quality issues by identifying problems, examining solution options, implementing action plans, and providing resources.
  • Effectively communicate and reinforce commitment to quality improvement efforts
  • Participate in the development of Failure Mode and Effects Analysis (FMEA).
  • Program Quality
  • Serve as point of contact with the Quality Manager for program progress and monitoring.
  • Support efforts to ensure overall customer satisfaction relative to current project or product and prospective follow-on business.
  • Participate in the creation of operational/program plans and/or procedures and coordinate with customer and supplier representatives to ensure satisfactory quality system performance.
  • Participate in the administration of program and project activities and processes.
  • Identify necessary quality resources to achieve organizational goals and objectives.
  • Perform and lead specialized quality functions as contract evaluation and planning; data preparation, analyzes and reporting; development of quality tools, techniques and methods; process improvements; maintenance of accountability and configuration of deliverable products and records; special investigations and audits: material review support; preventive and corrective actions; customer interface, liaison and support; product delivery; and audit of manufacturing and test data for quality system requirements.
  • Quality and Mission Success o Resolve issues at department/program level.
  • Test and recommend products, processes, and software, equipment and measurement systems.
  • Provide technical expertise to company employees, suppliers, customers and regulatory agencies to ensure compliance with contractual, company, and regulatory requirements.
  • Facilitate problem solving activities and events.
  • Provide education and coaching on the company’s quality system to program and process team mates.
  • Make recommendations that affect quality, products, processes and costs.
  • Act as FOD Coordinator as applicable to site/area.
  • Pursue personal development of skills and knowledge necessary for the effective performance.
  • Performs other duties, tasks and responsibilities as assigned.


Please send resumes to Gus Sanchez at: gsanchez@pdstech.com or call 314-264-3135 to discuss. 


 


Required Qualifications:
  • Bachelors Degree in Engineering or related discipline required, OR a combination of education and at least 7 years of relevant experience may be considered in lieu of degree
  • Five years of experience in quality required.
  • U.S. Person per ITAR regulations to comply with export compliance and site SSA requirements

Additional Qualifications:

  • Will have a fundamental understanding of quality philosophies, principles, systems, methods, tools, standards, organizational and team dynamics, customer expectations and satisfaction, supplier relations and performance, leadership, training, interpersonal relationships, improvement systems and professional ethics.
  • Will have a fundamental understanding of a quality system and its development, documentation and implementation to domestic and international standards or requirements.
  • Will have a basic understanding of the audit process including types of audits, planning, preparation, execution, reporting results and follow-up.
  • Will be able to develop and implement quality programs, including tracking, analyzing, reporting and problem solving.
  • Will be able to plan, control and assure product and process quality in accordance with quality principles, which include planning processes, material control, and acceptance sampling and measurement systems.
  • Will have basic knowledge of reliability, maintainability, and risk management, including key terms and definitions, modeling, systems design, assessment tools and reporting.
  • Will have a thorough understanding of problem-solving and quality improvement tools and techniques. This includes knowledge of management and planning tools, quality tools, preventive and corrective actions, and how to overcome barriers to quality improvements.
  • Will be able to acquire and analyze data using appropriate standard quantitative methods across a spectrum of business environments to facilitate process analysis and improvements.
  • Maintaining the integrity of the certified quality system requirements with lean, cost effective strategies that meet the organizations needs.
  • Advocating as the "voice of the customer" demanding the highest quality expectations from the organization.
  • Executing the duties of the position such that the focus is largely proactive versus reactive.
  • Superb written, communication interpersonal and leadership skills.
  • Computer literate in Excel, Word, Access, Project and PowerPoint.

Please send resumes to Gus Sanchez at: gsanchez@pdstech.com or call 314-264-3135 to discuss
 
Job Number: 1810081749
Job Location: Hazelwood, MO
Per Diem: Yes
Duration: 6 months
Input Date: 03/26/2018
Last Updated: 10/17/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002dx9mAAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Engineer II

Description:
Location: Savannah, GA
Rate: $55.00/HR
Duration: Long Term contract

****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
- Catia V5 Exp.

Education and Experience Requirements:
Bachelor’s degree in a related curriculum or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.4 years related technical exp in a manufacturing environment or repair and overhaul working with quality management systems with continually increasing responsibility. 3 years exp specific to the appropriate Quality department work to be performed.

Position Purpose:
Working under general supervision, in a team oriented environment, perform all tasks in area of responsibility in a timely and efficient manner to support the inspection/quality system ensuring all aspects of the delivered/finished article is manufactured in accordance with approved quality system requirements and is certified as compliant to type design requirements or compliant with in service limitations for Repair Station activities.

Principal Duties and Responsibilities:
Essential Functions: 1. Manage the compliance of the quality activities of suppliers or Company facilities through the application of system, product and process audits to the requirements of the FAA approved data. 2. Certify a supplier or assess a Company facility quality system, personnel, processes and equipment as required to the applicable quality standards. 3. Perform surveillance, source inspections, and first article inspections at supplier facilities, foreign or domestic and/or monitor the inspection system performance throughout all Company Operations, Materials and Repair Stations. 4. Coordinate quality assurance program plans, monitor and modify audit schedules, evaluate acceptance test programs, and quality engineering requirements of Company suppliers or facilities and review to ensure program effectiveness and integrity. 5. Witness and validate acceptance, qualification, interchangeability, configuration and compatibility tests. 6. Provide Company liaison support regarding supplier or facility performance to established requirements. 7. Coordinate documentation support for FAA Compliance.

Additional Functions: 1. Conduct product, system or process failure investigations, and provide technical assistance in resolution of quality problems. 2. Verify required corrective action implementation for timeliness and effectiveness. 3. Perform trend analysis of audit results to identify quality system deficiencies. 4. Work with other departments as needed to meet quality compliance of parts and processes. 5. Perform other duties as assigned.

Other Requirements: 1. Previous Quality experience relative/complying with Regulatory Standards. 2. Understands and is able to apply and communicate to others: blueprints/specifications; Federal Aviation Regulations; Quality Control System Requirements; knowledge of manufacturing/fabrication techniques and processes 3. Computer literate; capable of working within the various software applications utilized throughout the corporation. 4. ASQ Certification as Quality Engineer or Quality Auditor preferred. 5. A&P license preferred.
 
Job Number: 8499
Job Location: Savannah, GA
Rate: $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 03/21/2018
Last Updated: 04/24/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Systems Specialist 2

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Quality Systems Specialist 2
(U.S. Citizenship Required*)
Tinker AFB, OK
2018-5814

Responsibilities:
• Assist reviewing proposals, contracts, regulatory, program and customer requirements to prepare quality assurance plans and tests for hardware and software products, processes and services.
• Maintain Quality directives, policies, processes, procedures and metrics to assure program, contract, customer, regulatory requirements, international standards and working agreements are deployed using established procedures.
• Collect and verify data to support the identification of root cause routine problems.
• Provide ideas and concepts for corrective action development.
• Support quality source selection and process reviews of suppliers' ability to meet program quality requirements.
• Assist with hardware, software and system level audits to determine compliance with quality management system standards, configuration assurance, related business, regulatory and customer requirements.
• Document audit results in standard formats.
• Compile data and provides recommendations for material review disposition.
• Work under general supervision.

Qualification:
• Required – active Interim Secret clearance
• Work to be performed in Italy with potential for follow-on in OKC. This is a Tinker-Based operation.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's degree and typically 3 or more years’ related work experience, a Master’s degree and typically 1 or more years’ related work experience or an equivalent combination of education and experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-5814
Job Location: Tinker AFB, OK
Rate: Based on experience
Duration: 2 Months
Input Date: 04/11/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Peggy Holcombe
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

RS Avionics/Elec Tech II

Description:
PDS is seeking a Avionics/Electrical Technician II for an open position in Brunswick, GA.

Provides technical expertise in testing aircraft systems, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. May fill in for the Senior Avionics/Electrical Technician thus ensuring that the company goals of safety and quality are enforced at all times while adhering to daily work plans to maintain schedule requirements. 

Principal Duties and Responsibilities:

Essential Functions: 1. Demonstrates technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting. 2. Performs the installation and functionally testing of electrical/avionics components and systems on aircraft per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. 3. Ensures quality and efficiency of all installations: troubleshoots processes/concepts to provide timely, quality repairs of malfunctioning systems. 4. Demonstrates the skills and knowledge required to effectively and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring. 5. Performs and complies with engineering changes and modifications as required. 6. Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability. 7. Ensures that all work performed on the aircraft is properly and completely documented and ready for inspection. 8. Tests and maintains test equipment, electronic systems, and components. 9. Complies with the company FOD program, tool control program, 5-S program and all safety regulations. 10. Adapt to sudden schedule changes. 

Additional Functions: 1. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. 2. Performs other duties as assigned. 
 


 

Education and Experience Requirements:

High School graduate/GED. A & P license, FCC license or NCATT certification preferred. Four (4) years experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and two (2) years related experience.

Unique Skills:



Unique skills: Required Experience with Avionics software loads and aircraft maintenance interfaces.

Other Requirements:
1. Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs. 2. Ability to read and interpret basic blueprints and schematic diagrams. 3. Demonstrates excellent communication skills. Must be able to communicate effectively both verbally and written. 4. Must be able to climb stairs and ladders, work in confined areas and lift up to 80 pounds.
 


 
Job Number: 1810083669
Job Location: Brunswick, GA
Duration: 6 months
Input Date: 04/03/2018
Last Updated: 10/17/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Donnell Covington
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mKIRAA2&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Reliability Engineer

Description:
(Eligible for Secret Clearance)

-Diagnostic algorithm development
– diagnostic tests/procedures to perform fault detection and fault isolation.
-Software skills
– Ability to read code and design requirements for software engineers to write BIT tests.
-Ability to teach others BIT / testability.
-Practical hands on experience with hardware test and troubleshooting.
-Familiarity and ability to model systems with US Army Materiel Systems Analysis Activity (AMSAA) Reliability Growth Planning Models (PM2-Continuous and PM2-Discrete), Reliability Growth Tracking Model (RGTM-C), Reliability Growth Projection Models (ACPM, AMPM, and ADPM), and Reliability Test Planning Tools (IPT-C and IPT-D)
 
Job Number: 40635
Job Location: FL
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 04/03/2018
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Reliability, Maintainability and Safety Engineer III

Description:
Position Summary: This position will encompass all aspects of systems and component Reliability, Maintainability and System Safety (RMS) engineering. Duties will include developing statistical methodologies to proactively identify in service reliability and safety issues. This will include tool development and automation, process design for validation of data, and report generation. This position involves multiple ongoing programs spanning Military and Commercial Aviation, and Commercial Space Launch business spaces. Specific duties and responsibilities include but are not limited to the following:

Essential Duties and Responsibilities:

Performs Reliability Predictions; Reliability Centered Maintenance Analysis (RCM/RCM+).
Approves Failure Modes, Effects and Criticality Analysis (FMECA); Functional Hazard Assessment (FHA); Fault Tree Analysis (FTA).
Conducts and approves System Safety Assessment (SSA), Reliability Block Diagrams (RBD), Zonal Analysis, Common Modes Analysis (CMA), Level of Reparability Analysis (LORA).
Performs MSG-3 Analysis (MSI and SSI).
Provide Design for Maintenance / Design for Reliability inputs in support of engineering release.
Aiding systems, hardware, and software engineering teams in defining system safety requirements during new development activity.
Reviewing and approval of design and development documentation for safety critical equipment.
Reviewing and approval of Functional Hazard Assessments (FHA) for assigned subsystem.
Assisting with the creation and response to Customer Engineering Coordination Memos (ECMs).
Develops RMS Department process documentation.
Participating in ARP related audits, Design Reviews, and cross domain Systems Engineering peer reviews.
Providing assistance to and collaboration with Systems and Design Engineering Departments.
Leads technical issue discussion and resolution with the Customer.
System Safety Analysis in support of System Architecture and Design
Proposal Support.
Responsible for development and approval of reliability predictions of a system and components (including review and approval of supplier component reliability predictions.
Support Design reviews (System & Component).
Generate system & component requirements based on Safety analyses.
Training & mentoring of junior RM&S engineers.
Ability to perform Mean Time Between Failure Predictions, Fault Tree Analyses, ARP-4761 System Safety Analysis etc.
Advanced knowledge of ARP-4754 and ARP-4761.
Leads groups of engineers.
Responsible for successful completion of assigned tasks within committed schedule and cost.
Travel is possible for both domestic and international business.
Performs other duties as required.

Qualifications & Skills Requirements:

Requires a BSAE, BSME, or Bachelor’s degree in a related engineering field and more than 10 years of experience – combination of experience and certificates (military, FAA, etc.) may be used to meet some or all qualification requirements.
Must be highly competent using MS Office products.
Experience with RELEX, EAGLE, SLICWave, PowerLOG, and similar RM&S applications desired.
Experience with CATIA V5 is a plus.
Must also possess strong communication skills, verbal and written, strong organizational skills, and be able to work well within a team (IPT) environment as well as on his/her own, within a fast-paced, highly interactive environment.
Ideal candidates must be highly motivated self-starters who can ramp up quickly and demonstrate ownership of assigned tasks and activities.

Physical Requirements: Individual must be able to sit for extended periods of time, working at a desk and/or attending meetings. May occasionally require employee to lift and/or move up to 10 pounds. Will need to be able to move throughout the office and communicate with other employees and management. Work will be performed in an office environment. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties of the job.

LMI is an equal employment opportunity employer. Consistent with applicable law, LMI provides access and opportunities to those with disabilities. This includes providing reasonable accommodation to individuals with disabilities and disabled veterans who seek to access the company’s online application system. If an applicant is unable to fully access the online application system, LMI will provide a reasonable accommodation. Applicants with disabilities may contact us at 636-916-2400 for assistance accessing the on-line application system. Callers should have a detailed description of the requested accommodation, their name and preferred method of contact ready for LMI‘s Human Resources Department. LMI will make every effort to respond within two (2) business days. This phone number is not for the general submission of application materials.

LMI is an E-Verify Employer.

LMI is an Equal Employment Opportunity/Affirmative Action/Disability/Veterans Employer

Click the link and follow instructions on HOW TO APPLY: LMI ENGINEERING JOB OPPORTUNITIES
 

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
SCA Technical Writer

Description:
A Technical Writer with C130J and aviation TCTO's familiarity is ideal for this position! Our client, a well-known company in the aerospace industry is ready to bring new talent to their team! Apply to have an opportunity to join them!

The ideal candidate for this position will perform the following tasks:
* Writes, rewrites and/or edits technical documents
* Acquires subject knowledge by interviewing product developers, observing performance of production methods, referring to technical specifications, blueprints, engineering illustrations, and trade journals.
* Oversees preparation of illustrative materials, selecting drawings, sketches, diagrams and charts.
* Conducts quality review of materials.

Mandatory Qualifications and Experience:
* C130J familiarity
* Reading Engineering drawings
* Familiarity with aviation TCTO's
* Must be able to obtain a secret clearance

Desired Qualifications and Experience:
* Corel software experience
* CAD software experience (CATIA, Solidworks, autocad)

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 127615
Job Location: Lexington, KY
Start Date: ASAP
Input Date: 04/16/2018
Last Updated: 05/01/2018
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
SW/HW Quality Assurance Engineer (Secret Clearance)

Description:
***Must have ACTIVE SECRET Clearance***

Develop, administer, operate, manage and maintain a SW Quality Assurance system in Clifton, NJ

Job Description:
• Take the lead and ownership of QA processes and procedures and ensure conformance to established company, contractual, and regulatory standards
• Assure that all aspects of the Solaris family of programs' SW and HW Quality Assurance, Quality Control, and proficiency testing practices are sound and within established Quality Assurance guidelines
• Conduct audits and proficiency testing; recommend implementation of preventive measures and corrective action to ensure non-recurrence of deficiencies
• Perform development and execution of Software Quality methods and processes
• Responsible for performing tests, test methods, and test procedures to ensure continuous improvement to Software Quality Assurance standards
• Implements and defines testing methodology and standards to improve results
• Creates and maintains documentation of test results to assist in debugging and modification of software
• Analyzes test results to ensure existing functionality and recommends corrective action
• Consults with senior testers and development engineers to help resolve issues
• Ongoing work towards improving the test process is also expected
• Communicate effectively, both written and oral
 
Job Number: 18-07269
Job Location: Clifton, NJ
Rate: 60-75
Per Diem: Split
Overtime: Possible
Duration: 6 Month+
Start Date: ASAP
Input Date: 03/27/2018
Last Updated: 04/10/2018
Firm Name: NESCO RESOURCE
Attention: Cody Grimes
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sales Account Manager

Description:
We are seeking for a Sales Account Manager for this company in Everett, WA. All New Business Development Managers are responsible for out bound prospecting with goal of acquiring new customers.

RESPONSIBILITIES:
Primary focus is to develop a sufficient pipeline by prospecting potential customers through outbound activity from inactive, existing customers and prospect databases
Secondary focus is to be involved in managing and working with their assigned accounts to grow revenue by presenting new options and products lines.
Activities include creating, and managing sales programs for each account. Documenting call activity, sales plans, competitive data, next steps, and actions items in CRM
Achieving sales goals through sales pipeline development, sales leads, understanding sales metrics, and other plans or assigned sales functions and processes
Minimum inbound/outbound calls on average per day is 80 (touch points.)
Additional duties:
Provide technical knowledge to external customers to solve installation or sales related questions
Product knowledge: Must have basic knowledge in the differential industry
Communication: Must have outstanding communication skills in both oral and written form
Product Feedback: Provide input/suggestions for enhancement and/or new product ideas including competitive information
Customer satisfaction: Track the progress and status of customers on an ongoing basis to ensure customer satisfaction
Minimum Requirements:
Demonstrated focus on customer service and team building.
Ability to maintain a highly motivated work ethic, focusing on customers and sales objectives
Must possess the ability to work effectively with cross functional teams.
Must exhibit solution selling disciplines and process control in all phases of daily work assignments
Must display considerable independence while meeting corporate objectives
Must be capable of managing multiple projects and assignments
Must possess an appropriate degree of analytical and financial skills
Must exhibit change management skills and continuous improvement behaviors
Solid experience in prospecting, qualifying and closing accounts.
Ability to influence and develop relationships key decision makers. Must be a self-starter, self-motivated; possess outstanding business acumen and self-discipline and be technically minded.
Passionate sales person who with strong “sales hunter” skills.
Must be enthusiastic and professional
Practical problem solver, analytical and timely.
Proficient communicator with outstanding time-management skills, strong sense of urgency and natural ability to prioritize.
Demonstrated record of achievement in prior sales related position.
Education:
Bachelor’s Degree in Business or the equivalent is required or equivalent combination of education and experience.
Computer Skills: Proficiency in use of MS Word, Excel, PowerPoint and Outlook with Business Contact Manager Software
 
Job Location: Everett, WA
Input Date: 04/03/2018
Last Updated: 04/10/2018
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Secret Clearance - Software Engineer

Description:
ACTIVE SECRET CLEARANCE MANDATORY

Responsible for development, integration and test of embedded software in C++. This person will be required to support integration of software functions into tactical hardware.

Recent experience developing embedded software in C++. Experience integrating embedded software into hardware platforms.

Desired:
Experience with VxWorks
Experience with Linux
Defense industry experience
Experience with C#
Experience with Qt
Experience with multi-core processing
Experience with open architecture
Mobile Development (Android)
 
Job Number: 41295
Job Location: Orlando, FL
Per Diem: Split
Overtime: Possible
Duration: 1 yr
Input Date: 04/03/2018
Firm Name: PANTHER GROUP
Attention: Bob
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Advanced Systems Engineer

Description:
We are seeking for an Senior Advanced Systems Engineer for a well known company in Scottsdale, AZ. The position provides an opportunity to develop the cutting-edge technology that supports some of our nation's fundamental defense services.

RESPONSIBILITIES:
Senior Advanced Systems Engineer's analyze, design, develop and test systems to ensure the integration of software, hardware, reliability, maintainability, safety and other requirements in the total engineering effort.
formulating operational concepts; performing mission, functional, cost-benefit and risk analysis; selecting systems architecture; and preparing specifications for operating systems to ensure designs meet applicable security specifications.
Document security on both new and fielded information systems or provide accreditation/certification evaluation and test support to ensure all technical security features are considered and functioning properly.
Exercise creative thinking and ideation to advance our business performance
Deliver innovative, flexible, integrated solutions to meet customers changing business needs
Support and engage in programs, projects and practices behind the culture and strategy, and comply with all policies and procedures
Follow industry and department trends and developments to ensure services are consistent with, and/or superior to, industry best practices
PREFERRED DEGREE TYPES AND EXPERIENCE:
Electrical Engineering, Systems Engineering, Computer Engineering
Experience in SIGINT and Space Payloads.
TS/SCI security clearance
 
Job Location: Scottsdale, AZ
Overtime: Yes
Start Date: ASAP
Input Date: 04/03/2018
Last Updated: 04/10/2018
Firm Name: VELOCITY CONSULTING SOLUTIONS
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Electrical Engineer (Secret Clearance)

Description:
ROLE AND RESPONSIBILITIES
Provide electrical engineering support to Research, Development, Test and Evaluation (RDT&E) programs for military aircraft/weapon systems, including planning, directing, and/or participating in aircraft and laboratory testing. Prepares procurement specification inputs, interface drawings, installation design packages, and calibration procedures to accommodate unique test requirements. Oversees systems modifications, installation, integration, and checkout functions. Performs test planning, data collection, and test data analysis. Functions entail providing support for electrical power quality testing and evaluation, including voltage and frequency transients/modulation, voltage distortion, and power interruption on various aircraft, shipboard, ground vehicle, and vendor prototype components and equipment. Functions involve applying engineering principles to modify and upgrade laboratory electrical and instrumentation systems in support of power and propulsion RDT&E programs. Projects will interface test articles with programmable power supplies and data acquisition equipment to conduct power quality tests, followed by analysis of test article responses for compliance with MIL-SPECS/MIL-STDs. In particular, candidate must have experience with Interface Standards for input power to military and aircraft contained in MIL-STD-704, military vehicles contained in MIL-STD-1275, and FAA RTCA DO-160. That experience must also include interpreting guidance for test procedures specified in MIL-HDBK-704 parts 1 through 8. Position also requires knowledge of test planning, data collection, data analysis, test report writing, and presentation of results. Further requirements include specialized knowledge and experience in the design, installation, operation, calibration, maintenance and repair of power quality test facilities, associated equipment, and their control systems. Duties may include performing other tasks for propulsion and power as directed. Candidate must be able to obtain/retain a Secret level DoD security clearance, and may be required to perform other tasks on an as-needed basis. Position is located in Patuxent River, MD.



REQUIREMENTS
Education:
Bachelor's Degree in Electrical Engineering (EE) from ABET accredited university required with a minimum of 8 years' experience supporting RDT&E to include 6 years performing functional aspects as described in the roles and responsibilities. Master's Degree in Electrical or other Engineering related discipline a plus.

Experience:
Experience working with research, development and testing with respect to requirements and characteristics of propulsion and power equipment performance.
Experience must include conducting tests to generate extreme power conditions meeting specification for standardized test regimes then conducting performance tests of electronic and electrically-powered equipment after exposure to test conditions.
Applying test conditions to include extremes with respect to voltage, frequency, modulation, distortion, and other characteristics.
Performing tests post exposure to extreme conditions to verify operation remains within specification and the equipment continues to function reliably in-service.
Experience with MIL-STD-704, MIL-STD-1275, and FAA RTCA DO-160 required.
Must have demonstrated experience directing, monitoring, and/or participating in the installation, configuration, calibration, and operation of engine test systems, environmental chambers, associated instrumentation, and/or data acquisition systems used for testing propulsion and electrical power systems.
The candidate should be capable of managing programs including writing proposals, developing program plans, and providing briefing material.

Knowledge, Skills and Abilities:
The candidate should be capable of managing programs including writing proposals, developing program plans, and providing briefing material.
Functions involve applying engineering principles to modify and upgrade laboratory electrical and instrumentation systems in support of power and propulsion RDT&E programs.
Applying analysis and test methods demonstrating equipment compliance to power characteristics.
Ability to develop test plans, design test equipment, establish protocols and procedures specific to individual test articles following guidance provide in DoD, FAA, and other documents.
Knowledge in applying programmable power sources with appropriate software and firmware needed to generate waveforms specified by test standards.
Knowledge of MIL-STD-704 and the eight parts of MIL-HDBK-704 for aircraft systems. Knowledge of MIL-STD-1275 for Military Vehicles.

Equipment and Machines:
Ability to operate office equipment such as personal computer, printer, copy machine, telephone, fax machine and other equipment including desk supplies and other work related tools as required.
Ability to operate power test systems to include programmable AC/DC power sources, power analyzer, test management and control systems, laboratory measuring, environmental chambers and other equipment required to provide test conditions, manage test sequences, and perform measurements of test parameters.
Ability to perform or facilitate calibration and repair of laboratory testing and measurement systems.

PREFERRED SKILLS
Prior DoD acquisition work experience is preferred. Familiarity with NAVAIR Propulsion and Power Laboratories and related competencies also preferred.

ADDITIONAL NOTES
Applicant selected will be subject to a government security investigation and must meet eligibility requirements for access to classified information.
 
Job Number: 18-07393
Job Location: Patuxent River, MD
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 Month+
Start Date: ASAP
Input Date: 03/27/2018
Last Updated: 04/10/2018
Firm Name: NESCO RESOURCE
Attention: Cody Grimes
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Principal Applications Developer Specialist

Description:
Our client, a market leader and technology innovator, is seeking talented professionals to deliver cutting edge solutions to their customers. Well-respected, with a global presence, our client consistently offers a powerful and robust portfolio of products, services and solutions that help customers successfully execute their missions in today’s dynamic environment. With unsurpassed engineering, using an open systems approach, our client solves the nation’s most complex challenges while foreseeing future needs.

Senior Principal Applications Developer Specialist
(US Citizenship Required*)
Fairfax, VA or Scottsdale, AZ
2018-5769

Responsibilities:
• Develop custom web and mobile applications using standard tools such as ASP.NET MVC with Bootstrap and Xamarin Forms. C# is standard but others are used as well.
• Use version control such as Team Foundation Server GIT as repository for source code and to manage software product lifecycle.
• Consult and collaborate with business leaders, end user, IT staff, vendors, and other third parties and is involved in every phase of application development lifecycle
• Use development and applications administration/support skills in the configuration, customization, maintenance, and interfacing of Commercial off the Shelf (CoTs) business applications in the company infrastructure
• Specify requirements, design solutions, prototype plans, developing and testing code, solution release, and supporting issue analysis and resolution
• Collaborate with a team of IT professionals to set specifications for new applications
• Design creative prototypes according to specifications
• Write high quality source code to program complete applications within schedule deadlines.
• Ensure application interoperability with IT infrastructure components while ensuring compliance with wide-ranging information security requirements
• Ensure application integration interoperability with other applications or subsystems (e.g. interface management, data integration systems, job automation)
• Perform unit and integration testing before launch
• Test code using sample data sets to ensure the output from the program meets the requirements
• Conduct functional and non-functional testing
• Troubleshoot and debug applications
• Evaluate existing applications to reprogram, update and add new features
• Develop technical documents to accurately represent application design and code
• Recommend coding fixes to resolve outstanding issues and work to enhance applications to automate business process as best possible
• Lead, plan, and execute projects, small initiatives, and/or cross-functional teams
• Manage high risk, high profile, tight schedule, and complex outcomes with composure
• Break down 'barriers to progress' & motivate less experienced members of the team to action
• Perform other duties as directed
• Telecommuting may be an option; prefer candidates located near one of our major facilities in Scottsdale, AZ or Fairlakes, VA.

Qualifications:
• Work history of flexibility and adaptability to changing business needs; shows ability to recognize need for change
• Significant ability to program in at least 1 programming language (e.g., such as C#, Java, .Net) and SQL scripts, using Xamarin Forms for native mobile apps, and other
• Experience using Team Foundation Server / GIT as source code repository and Agile Scrum backlog management tool.
• Experience with DevOps concepts and Docker are desired; knowledge of automated builds, continuous integration and automated testing will prove useful.
• Act with speed, personal accountability, energy, and determination to overcome adversity, maximize team productivity, and deliver effective business results
• Certified application developer indicating a degree of appropriate foundational knowledge is strongly preferred
• Demonstrated analytical thinking and complex problem-solving capability.
• Demonstrated knowledge of programming for diverse operating systems and platforms using development tools and languages
• Demonstrated knowledge of software design and programming principles
• Evidence of ability to act highly independently on large and unique tasks and wide-ranging initiatives using a subject matter expertise of the Application Development discipline
• Demonstrated presentation, oral/written communication, and inter-personal skills including the ability to: anticipate, influence & adapt to a wide range of audiences; cultivate relationships and leverage organizational understanding to facilitate decision making and buy-in
• Exhibits subject matter expertise on how IT solutions are constructed and in-depth expert application administration knowledge
• Has ability to evaluate intangibles in the analysis of significant and unique initiatives, situations, alternatives, proposals, designs, architectures, risks, data, systems, and constructs
• History of providing work direction and leadership to others
• Demonstrated experience as an application developer and designing and building applications
• Demonstrated experience developing solutions to extremely complex, cross-domain, problems requiring significant business acumen, technical knowledge, ingenuity, creativity, and innovation
• Demonstrated organizational skills including: superior ability to lead initiatives and cross functional projects; a facility to handle multiple tasks and deliverables simultaneously; a track record of exercising independent judgment appropriately; and the ability to quickly understand and execute complex assignments when working on high profile outcomes with inherent risk
• Demonstrated track record of being capable of working with significant uncertainty, resistance, barriers, issues and challenges; converting uncertainty into quantifiable impact, risk and mitigating actions
• Demonstrated understanding of solutions development methodologies (e.g. DevOps, Agile, Software Development Lifecycle, etc.)
• Significant experience as a developer, systems integrator, systems engineer, or solutions architect
• Demonstrated experience in leading teams and/or technical leadership including: ability to coach, supervise, & influence team/stakeholder(s); establish a compelling vision then plan and coordinate actions to achieve goals
• Demonstrated knowledge of organizational change management principles including; leading change; building a coalition; anticipating resistance to change; designing / implementing appropriate strategies; institutionalizing change
• Significant understanding of business stakeholder requirements, gain a thorough understanding of their desired business outcomes, and how they translate in application features
*US Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's degree in Information Technology, Engineering and/or related field or equivalent experience, plus 8 years of related experience or Master's degree and 6 years of related experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-5769
Job Location: Fairfax, VA
Rate: Based on experience
Input Date: 04/04/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Jeff Prukop
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Principal Systems Engineer

Description:
We are seeking for an Senior Principal Systems Engineer for a well known company here in Scottsdale, Arizona. The position provides an opportunity to develop the cutting-edge technology that supports some of our nation's fundamental defense services.

RESPONSIBILITIES:
Senior Principal Systems Engineer's analyze, design, develop and test systems to ensure the integration of software, hardware, reliability, maintainability, safety and other requirements in the total engineering effort.
Formulating operational concepts; performing mission, functional, cost-benefit and risk analysis; selecting systems architecture; and preparing specifications for operating systems to ensure designs meet applicable security specifications.
DOcument security on both new and fielded information systems or provide accreditation/certification evaluation and test support to ensure all technical security features are considered and functioning properly.
Exercise creative thinking and ideation to advance our business performance
Deliver innovative, flexible, integrated solutions to meet customers changing business needs
Support and engage in programs, projects and practices behind the culture and strategy, and comply with all policies and procedures
Follow industry and department trends and developments to ensure services are consistent with, and/or superior to, industry best practices
PREFERRED DEGREE TYPES AND EXPERIENCE:
Electrical Engineering, Systems Engineering, Computer Engineering
Experience in SIGINT and Space Payloads.
TS/SCI security clearance
 
Job Location: Scottsdale, AZ
Overtime: Yes
Start Date: ASAP
Input Date: 04/03/2018
Last Updated: 04/10/2018
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Software Architect

Description:
We are seeking for an Sr Software Architect to support business development activities through analysis of customer and market requirements and comparison against product lines along with other vendor products/capabilities. Recommend the development of new capabilities in support of market and customer needs.

Responsibilities:
Perform software requirements analysis, system integration activities, lead research, designs, develop and tests software and tools, to include development of new work products or enhancing existing applications, systems or embedded products.
Support SIGINT program pursuits and execution.
Assessment of the system level functional and performance requirements and the definition of software system implementation strategies
Working closely with the RF/DSP engineering and capture teams to perform trade studies pertaining to the development of the control, status, varied analytic application infrastructure and execution, along with operator visualization functionality.
The software functionality will entail architectures and concepts that facilitate the real-time operation of the system as well as the open architectural model that allows for the seamless integration of third party/COTS applications.
Development of buildup, integration and system level test approaches and plans.
Evaluate Customer requirements as they apply to the system level capabilities to include preparation and delivery of customer briefings and capability demonstrations.
Agile experience preferred. Experience in embedded real-time software applications associated with communications is ideal.

KNOWLEDGE SKILLS AND ABILITIES:
Large-Scale Software Architectures – Open Systems Architecture
Service Oriented Architecture
Agile Development Methodologies
C/C++ code development, integration and test
JAVA code development, integration and test
System and Subsystem integration and test
TS/SCI security clearance is required

Qualifications:
Bachelor's degree in software engineering or a related technical field is required (or equivalent experience), plus a minimum of 10 years of relevant experience; or Master's degree plus a minimum of 8 years of relevant experience. Agile experience preferred.
TS/SCI security clearance is required
 
Job Location: San Jose, CA
Overtime: Yes
Start Date: ASAP
Input Date: 04/03/2018
Last Updated: 04/10/2018
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Software Test Engineer - Secret Clearance

Description:
***Must have ACTIVE SECRET Clearance***

Develop, administer, operate, and maintain an Aerospace (GPS-related) SW Quality Assurance system in Clifton, NJ.

Job Description:
• Take the lead and ownership of QA processes and procedures and ensure conformance to established company, contractual, and regulatory standards
• Conduct audits and proficiency testing; recommend implementation of preventive measures and corrective action to ensure non-recurrence of deficiencies
• Perform development and execution of Software Quality methods and processes
• Responsible for performi