Job Search Results

668 listings were found that matched your search words: Keywords: Aircraft ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2019/11/18 Monday 01:33PM Pacific Time by ContractJobHunter. )

Listings 1 - 668

Go To My Job Tracker

Expand all descriptions

2 Aircraft Stress Engineers - Composites

Description:
Aircraft composite stress engineering contractors needed.
MUST BE US PERSONS.
Ability to work in a fast paced environment.
MUST have a good Composites Primary Airframe Structures background.
FAR 23 experience is a huge plus.
Classical hand analysis, Nastran, FEMAP a plus
US PERSONS REQUIRED

Position Responsibilities
This is a Senior Level Contract Stress Analyst position.
General Minimum Requirements:
• Education: MS with 8+ years, or BS with 1O+ years of relevant experience
• Create engineering criteria and analysis methods to ensure that the work meets all program requirements (e.g., airworthiness, customer requirements, internal methods and processes, etc.).
• Actively develop and evaluate plans for activities and soundness of proposed methods and analysis to meet the program schedules and airworthiness standards.
• Select appropriate material systems for structures applications and identify all material testing requirements.
• Identify and communicate technical risks to the relevant stake holders through program status reports in a timely manner.
• Review all program critical documents such as stress reports, manufacturing plans and procedures, and structural test plans in a timely manner to ensure compliance with design and loads requirements.
• Resolve complex engineering issues in creative and effective ways as to balance technical product, cost, and schedule.

Must be a US Citizen, or Greencard holder.

THE STRUCTURES COMPANY IS AN AA/EOE
 
Job Location: Manassas, VA
Rate: $75-85/hr DOE
Per Diem: Yes
Overtime: Possible
Duration: Long-term
Start Date: ASAP
Input Date: 04/02/2019
Last Updated: 11/18/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: chrissheets@thestructurescompany.com
Website: www.thestructurescompany.com

2 Aircraft Stress Engineers with Composites

Description:
2 Aircraft Composite Stress Engineers Needed.
Require 10+ years of aircraft/aerospace stress analysis with a good composites background.
Previous FEMAP experience is a plus.
Composite airframe analysis experience a MUST.
MUST be US Persons

Qualifications:
-Experience in aircraft or spacecraft composite, design and analysis processes
-Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures
-Minimum 10 years or more of applicable experience in the analysis of structural systems using strength of materials and finite element based methods
-Experience with free-body diagrams and classical stress analysis techniques
-Experience with FEMAP
-Rapid prototyping experience a strong plus
-Excellent computer skills, including Outlook, Word, Excel and PowerPoint
-Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
-Applicants must be U.S. persons as defined by ITAR
Educational Requirements-
Bachelors degree from an accredited institution, with a concentration in a relevant Engineering discipline

The Structures Company is an AA/EOE.
 
Job Location: Mojave, CA
Rate: $80-85/hr
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 06/25/2019
Last Updated: 11/18/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: chrissheets@thestructurescompany.com
Website: www.thestructurescompany.com

2 Stress Engineer Openings - Composites - Contract-to-Hire

Description:
We have a need for 2 Aircraft Composite Stress Engineers that are open to a contract-to-hire scenario. MUST be US Citizens.
Require 10+ years of aircraft/aerospace stress analysis with a good composites background.
Previous FEMAP experience is a plus.
Composite airframe analysis experience a MUST.
MUST be US Citizens

Qualifications:
-Experience in aircraft or spacecraft composite, design and analysis processes
-Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures
-Minimum 10 years or more of applicable experience in the analysis of structural systems using strength of materials and finite element based methods
-Experience with free-body diagrams and classical stress analysis techniques
-Experience with FEMAP
-Rapid prototyping experience a strong plus
-Excellent computer skills, including Outlook, Word, Excel and PowerPoint
-Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
-Applicants must be U.S. Citizens
Educational Requirements-
Bachelors degree from an accredited institution, with a concentration in a relevant Engineering discipline

The Structures Company is an AA/EOE.
 
Job Location: Mojave, CA
Rate: Open
Per Diem: Yes
Overtime: Yes
Duration: Contract-to-hire
Start Date: ASAP
Input Date: 07/18/2019
Last Updated: 11/18/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: chrissheets@thestructurescompany.com
Website: www.thestructurescompany.com

2560 - AVIONICS SYSTEMS ENGINEER - cv, word doc only

Description:
Interfacing with customers (both internal and external) during definition and implementation of avionic system integration.

Execute program milestones according to established schedule and ensure critical path and key dependencies are effectively managed to achieve successful outcome.

Reviewing detailed execution plans and schedules with the project management team to ensure adequacy, completeness, and harmonization with the overall program level plan.

Generating system requirements documents for physical and logical interfaces.

Defining cockpit display formats and control operation in conjunction with the customer.

Developing and running functional test procedures for all avionics sub-systems.

Advising the customer on the physical installation of avionics equipment.

Troubleshooting and diagnosing avionics problems on the systems integration rig and flight test aircraft (may involve travel)

Documenting, tracking, and resolving avionics problems resulting from both design errors and equipment failures.

Generating certification documents for subsystems demonstrating compliance with OEM certification plans.

Supporting Change Management related activities at the program level.

Bachelor's Degree in applicable engineering or science field, and ten years of related experience, or, in the absence of a bachelor's degree, sixteen years of related experience.

Detailed systems knowledge is required in at least five of the following systems: AFCS, Air Data, Cockpit Audio, Cockpit Printers, Datalink, EFIS, EICAS, Enhanced Vision Systems, FANS, FMS, GPS, Graphical Datalink Weather, HUD, Integrated Modular Avionics (IMA), On-board Maintenance Systems, Radio Altimeters, Synthetic Vision Systems, TAWS, TCAS/Transponders, VHF Comm, VHF Nav, XM Weather.

Analysis - thinking through a logical, in-depth analysis of a problem or situation.

Cooperation - Serves as a role model to his or her coworkers by demonstrating respect and sensitivity for fellow workers and promoting open discussion of issues.

Coordinating - Provides a seamless stream of communication and support.

Customer Service Orientation - Fully comprehends the value of the organization's customers and champions strategies to ensure world-class service.

Dependability - Consistently produces exemplary results that can be used as prototypes for future projects.

Judgment - Able to quickly assess the costs, benefits, and risks of a decision while using sound logic to ultimately make well-informed decisions.
 
Job Number: 2560
Job Location: Toronto, Canada
Rate: 85.00
Per Diem: No
Overtime: 1.5
Duration: Long Term
Start Date: ASAP
Input Date: 10/18/2019
Last Updated: 11/07/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2567 - DYNAMICS ENGINEER - cv, word doc

Description:
Responsible for constructing dynamic models that represent the behavior of landing gears in order to evaluate the operating loads and its stability.

Evaluate and analyze the rigidity, viscosity, mass distribution and friction parameters of our landing gear parts and systems.

Your expertise will be essential to determine the maximum loads according to various flight parameters and aircraft configurations, as well as ground loads.

Have to make sure that our landing gears are not subject to shimmy.

Bachelor's degree in mechanics, mechatronics, aeronautics

Mathematical mind and ability to perform advanced calculations

5 years of experience in kinematic and dynamic analysis of mechanisms using the MSC.ADAMS software

Familiar with hydraulic systems

Ability to solve complex technical problems

Matlab / Simulink environment expertise.

French and English fluency
 
Job Number: 2567
Job Location: Montreal, Canada
Rate: 90.00 US
Per Diem: TBD
Duration: Long Term
Start Date: ASAP
Input Date: 09/18/2019
Last Updated: 09/18/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2570 - METHODS AGENT - cv, word doc only

Description:
Define and write instructions and work sequences inside the assembly notebook for the assembly of aircraft components using different software methods such as SAP, CATIA V5 and 3DVia.

Participate in the investigation of root causes of problems and analyze potential solutions by assessing the costs, impacts and risks of a change in production.

Participate in the planning and implementation of production changes and coordinate the first unit.

Support the daily activities of production.

Participate in the definitions of tooling requirements, assembly and the implementation of various production equipment according to the optimal methodology taking into account the health / safety component.

Have a Technical College Diploma Avionics, Electrical or relevant area with 5 to 8 years experience.

Have completed a DEC specialized in aeronautics (construction, maintenance), in mechanical engineering in a recognized educational institution (CEGEP)

Have a good level of knowledge in French and English spoken and written.

Have good organizational and planning skills.

Are resourceful, autonomous and have good problem-solving skills.

Have good judgment and you work well in a multidisciplinary team.

Can work with Catia, Enovia, ERP, SAP and 3D VIA
 
Job Number: 2570
Job Location: Mirabel, QC, Canada
Rate: 42.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 10/18/2019
Last Updated: 10/18/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

2571 - EMC ENGINEER - cv, word doc only

Description:
Execute complex engineering assignments requiring expertise within EMC field.

Analyze modifications at Aircraft level and check compliance with certification regulations.

Estimate the level of impact of complex projects.

Propose plans for production ramp-up.

Participate in complex investigations related to cost reduction.

Participate in meetings and design reviews with system or structural suppliers for design optimization and cost reduction.

Participate in Continued Airworthiness projects and propose risk mitigating solutions.

University degree in Aerospace Engineering or equivalent. Specialization in Electromagnetic Compatibility and Susceptibility is required.

Have a minimum of 8 years working experience in the specialty within the Aerospace domain.

Are familiar with the relevant industry standards and best practices such as DO-160, SAE ARP, FAA regulations, as well as other applicable airworthiness regulations.

have good knowledge about FAR 25.981 regulations and fuel tank protection against lightning and static electricity
Familiarity with electromagnetic simulation / analysis tools (such as EMA3D) is a strong asset.

Have strong analytical skills.

Have team spirit, and have the ability of working in a multicultural environment.

Are self-motivated and are proactive in finding solutions to problems.

Have strong communication skills (written and spoken) in French and English.

Are able to travel.
 
Job Number: 2571
Job Location: Mirabel, Canada
Rate: 58.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 10/18/2019
Last Updated: 11/07/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

A&P Aircraft Mechanic

Description:
 PDS Tech is seeking an A&P Aircraft Mechanic in Trumbull, CT
 
* This is safety sensitive position and will require inclusion in an FAA approved Drug and Alcohol screening program.
 
The candidate will consistently and accurately disassemble, clean, evaluate, perform repairs and assemble and test Hydraulic landing gear components in accordance with approved data.
 
Assigned Duties
  • Work independently with limited supervision.
  • Use precision measuring instruments and gages such as feeler gauges, dial indicators, micrometers, calipers.
  • Perform repair of detail components by filing, stoning, lapping and polishing.
  • Using power and hand tools for drilling, sanding and riveting.
  • Write in a clear and concise manner the results of evaluations and be able to communicate repair requirements for work performed within our facility or sent to outside sources.
  • Adhere to all EH&S requirements, FAA & EASA regulations, company rules, policies, procedures and corporate initiatives.
  • Follow procedures found in component maintenance manuals, service bulletins, ORI’s, OREI’s, drawings, check sheets, etc.
  • Must be competent in the use of torque wrenches and have a complete understanding of SAC torque specification SS9300.
  • Chemically treat repaired surfaces in accordance with approved data.
  • Review and interpret related paperwork to ensure proper identification of parts, operational sequence and record information on appropriate documentation.
  • Perform assembly operations such as: install bushings, bearings, liners by shrink fitting and use or arbor press.
  • Use hydraulic test equipment.
     

Experience Required 
  • High School Diploma or Equivalent required 
  • Aerospace Powerplant and/or Airframe license. 
  • Min. 2 yrs. experience in Aerospace Maintenance

 
Job Number: 1910106123
Job Location: Trumbull, CT
Duration: 18 months
Input Date: 09/05/2019
Last Updated: 11/18/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chris O\'Connor
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GZGYQA4&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Aircraft Mechanic

Description:
The candidate will consistently and accurately disassemble, clean, evaluate, perform repairs and assemble and test Hydraulic landing gear components in accordance with approved data.

Assigned Duties
• Work independently with limited supervision.
• Use precision measuring instruments and gages such as feeler gauges, dial indicators, micrometers, calipers.
• Perform repair of detail components by filing, stoning, lapping and polishing.
• Using power and hand tools for drilling, sanding and riveting.
• Write in a clear and concise manner the results of evaluations and be able to communicate repair requirements for work performed within our facility or sent to outside sources.
• Adhere to all EH&S requirements, FAA & EASA regulations, company rules, policies, procedures and corporate initiatives.
• Follow procedures found in component maintenance manuals, service bulletins, ORI’s, OREI’s, drawings, check sheets, etc.
• Must be competent in the use of torque wrenches and have a complete understanding of SAC torque specification SS9300.
• Chemically treat repaired surfaces in accordance with approved data.
• Review and interpret related paperwork to ensure proper identification of parts, operational sequence and record information on appropriate documentation.
• Perform assembly operations such as: install bushings, bearings, liners by shrink fitting and use or arbor press.
• Use hydraulic test equipment.

Experience Required
• High School Diploma or Equivalent required
• Aerospace Powerplant and/or Airframe license.
• Min. 2 yrs. experience in Aerospace Maintenance.
 
Job Number: 1910106123
Job Location: Trumbull, CT
Per Diem: split
Overtime: possible
Duration: 1.5 years
Start Date: ASAP
Input Date: 09/26/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Flight Mechanics

Description:
STS Technical Services is hiring A&P Flight Mechanics in Ypsilanti, Michigan!

Essential Duties & Responsibilities:
Will be flown to where the aircraft is
Maintain contact with maintenance control regarding aircraft condition
Troubleshoot and accomplish all required servicing of the aircraft including: wheel and brake replacement, engine oil servicing replacing burnt out light bulbs, wiping down struts, etc. Maintain control as work is completed
Perform other duties as directed by the GMM, maintenance control or his supervisor
Qualifications:
Must have A&P License and previous 747 experience
About STS Technical Services:
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 42988
Job Location: Ypsilanti, MI
Input Date: 08/28/2019
Firm Name: STS AEROSTAFF SERVICES
Attention: STS Technical Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

A&P Mechanic

Description:
The ideal candidates will perform Depot, Intermediate, and Organizational repairs, upgrades and Modifications to Aircraft product lines and their components. 

Duties to include:

  • Component overhaul and repair
  • Crash damage repair
  • Aircraft and component teardown and evaluation
  • Incorporating ECP's
  • Technical directives, ASAM's ASB's and CSN's
  • Validating and verifying retrofit kit upgrades
  • Administering training to customers

 Must be experienced in:

  • Must have 7-10 years of experience on UH-60 aircraft and an A&P license.
  • Maintenance of flight control systems
  • Fuel
  • Drivetrain
  • Rotor Systems
  • Blueprint Reading and Interpretation

Under a minimal of supervision be able to perform a variety of moderately complex tasks. 
 
 
Job Number: 1810092570
Job Location: Huntsville, AL
Duration: 18 months
Input Date: 05/15/2019
Last Updated: 11/18/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Sherrita Davis
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002f3lsAAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Mechanics

Description:
STS Technical Services is Hiring A&P Mechanics in Alcoa, Tennessee!

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-800-359-4787.

Job Summary:
Airframe & Powerplant technicians are certified and licensed by the Federal Aviation Administration to perform maintenance, scheduled and unscheduled on airframes and engines on aircraft registered in the United States of America

Job Duties:
Examine replacement aircraft parts for defects
Diagnose mechanical or electrical problems
Read and understand maintenance manuals and other technical documents and identify repair procedures
Repair wings, brakes, electrical systems and other aircraft components
Replace defective parts using approved tooling
Test aircraft parts with proper diagnostic equipment
Inspect complete work for compliance and performance standards
Review and research aircraft records
Interpret flight test data to diagnose malfunction and performance problems
Assemble aircraft components, perform required measurement and testing
Install system software and databases
Qualifications:
Possess FAA Airframe, Power plant. or airframe and Power plant Certificate or equivalent work experience (Repairman Certificate eligible)
2 years’ experience on General aviation or Corporate aircraft required.
Cirrus SR2X Experience/Factory Training a plus
Aircraft paint and refinishing experience a plus
Knowledge of Federal Aviation Administration Regulations
FAA Airframe, Power Plant or Airframe and Power Plant Certificate
About STS Technical Services:
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 44185
Job Location: Alcoa, TN
Input Date: 08/28/2019
Firm Name: STS AEROSTAFF SERVICES
Attention: STS Technical Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Mechanics

Description:
STS Technical Services is hiring A&P Mechanics in Melbourne, Florida!

Job Summary:
Examines, repairs, assembles, and tests aircraft accessories, such as engines, power brake units, auxiliary electric motors, carburetors, spark igniters, valves, pumps, fuselage, wings, and oil and fuel tanks, using hand tools and testing devices, and following shop orders and manufacturer’s specifications.

Essential Duties & Responsibilities:
Performs routine inspections or special maintenance to prevent failures of aircraft mechanical systems and components; performs complete operations checks on hydraulic systems, pneumatic systems, plumbing, precision assemblies, rigging and controls, etc.
Determines when a component should be repaired or replaced; decides upon necessary repair scheme, quantity and type of parts needed to accomplish proper repair; secures necessary parts from Stores or departmental supplies
Repairs, reworks, and modifies worn or defective assemblies, making alterations or changes to units when necessary
Follows approved maintenance procedures for subject component or system, consulting internal procedures that have been FAA approved, original equipment manufacturers (OEM’s) technical data, and work package instructions
Consults the Maintenance Lead if technical assistance is needed during the repair process
Inspects completed work before sign off to identify any needed rework; performs rework; ensures that repaired components meet prescribed standards and tolerances
Performs serviceability tests on repaired components/systems using test equipment specified by the original equipment manufacturer
Completes work package documentation by signing/stamping after finishing all designated operations
Submits completed/in-progress work to Maintenance Lead for review; submits to Quality Assurance for final/in-progress inspection and re-certification of airworthiness
Provides supervisor with performance statistics and other operational data, as requested
Properly accounts for time and materials used in all inspection and maintenance activities
Qualifications:
High School/GED
A&P and structures experience a plus
A&P License; zero to two years’ experience with aircraft/general aviation trained in one aircraft type; proficient and demonstrated skill with the aircraft
Over one year actual and recent depot level aircraft maintenance and repair experience is required, (repair of mechanical systems, components, hydraulics, pneumatics, plumbing, rigging etc.); proficiency with interpretation of original equipment manufacturer’s technical data or work package instructions; experience using power or pneumatic hand tools
Assignments require Minimal Knowledge beyond the assigned work
Demonstrates correct understanding of routine aspects of work
Knowledge of machines and tools, including their uses, repairs and maintenance
Knowledge of principles and processes for providing customer service
Skilled with repairing, troubleshooting, installing and equipment maintenance
Knowledge of FAA requirements for aircraft maintenance procedures
Ability to interpret and comprehend manufacturer and FAA approved work package instructions; ability to inspect and install parts/components
About STS Technical Services:
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 48152
Job Location: Melbourne, FL
Input Date: 08/28/2019
Firm Name: STS AEROSTAFF SERVICES
Attention: STS Technical Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
APG Mechanic URGENT URGENT / no clearance / 3 years’ experience of C-130 Flight Line experience required SC

Description:
164387 Job Title: APG Mechanic

Work Site Address: Greenville, SC 29605
Max Pay Rate: 25-29/hr DOE
Start Date: ASAP
End Date: 9 months
Position Type: Contract
1 more opening
• Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company.

Job Summary:
Inspects, troubleshoots, repairs, overhauls and modifies aircraft systems and powerplants in accordance with established written procedures, specifications, and standards. Candidate must be knowledgeable in aircraft systems operation and maintenance to include landing gear, powerplants, flight controls, disassembly, reassembly, rigging and aircraft movement.

Must be able to read and speak English. Comprehend documents such as safety rules, operating maintenance instructions and procedure manuals.

Mission essential functions and other duties may be assigned as required.

Qualifications and Education Requirements
• Candidate must possess at minimum, 3 years of C-130 Flight Line Experience
• Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company

In order to perform the essential functions of this job, the employee is regularly required to perform repetitive movements, work overhead, use hands to grasp, handle, and/or feel, reach with hands and arms. The employee is frequently required to stand, walk, stoop, kneel, squat, crawl, twist, and work on or in the aircraft. The employee is occasionally required to sit, climb, and balance. The employee must frequently lift and/or push or pull up to 25 pounds and occasionally lift and/or push or pull up to 50 pounds. Specific vision abilities required by this job include close vision, peripheral vision, depth perception and ability to adjust focus. While performing the essential functions of this job, the employee will be required to wear Personal Protective Equipment (PPE) as needed to perform job tasks. The employee is regularly exposed to vibration. The candidate will be frequently exposed to moving mechanical parts, fumes or airborne particles. The candidate must be able to properly use, handle and dispose of hazardous materials, and toxic or caustic chemicals per Government regulations and company procedures. The employee is occasionally exposed to wet and/or humid conditions, high, precarious places, and outside weather conditions. The candidate is required to work in a safe and efficient manner while maintaining a clean, FOD-free work area.

Preferred Skills
FAA Airframe and/or Powerplant License a Plus!
 
Job Number: JEG -1656-1
Job Location: Greenville, SC
Rate: 25-29/hr max
Duration: 9 -18 months
Input Date: 09/23/2019
Last Updated: 10/09/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
APG Mechanic / military or commercial aircraft experience / no clearance URGENT URGENT SC

Description:
165736 Job Title: APG Mechanic

Work Site Address: Greenville, SC 29605
Job Number: 1814-1
Max Pay Rate: $29.00/hr
Start Date: 8/19/2019
End Date: 12/31/2019
Position Type: Contract
• Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company.


Job Summary:
Performs a variety of mechanical duties involving diagnosis of malfunctions and required maintenance, disassembly, rework, repair, replacement, re-assembly or adjustment of various aircraft systems in accordance with technical specifications, engineering instructions, and FAA regulations.

Qualifications and Education Requirements
The hiring manager really needs to fill these 4 positions A.S.A.P. In an effort to fill these positions he has changed the requirements to 3 years APG experience on any Heavy Military Aircrafts.

Qty 4 position needed
Engine and Prop Rigging desired.

Experience
Areas of Expertise Fuel No 2 2 - 4 Years
Areas of Expertise Fuel Systems No 2 2 - 4 Years
Areas of Expertise P-3 No 1 6+ Years
 
Job Number: JEG -1814-1
Job Location: Greenville, SC
Rate: 29/hr max
Duration: 4 months +
Input Date: 09/23/2019
Last Updated: 10/16/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Adv Compos Tech III

Description:

PDS is seeking an Advanced Composite Tech III for an open position in Tulsa, OK

Position Purpose:



Under minimal supervision, perform one or more of the following composite part manufacturing functions: complex lay-up, cutting, bagging, autoclave, trimming, and/or complex repairs, in a production environment. Provide specialized technical assistance and interact with team members to resolve manufacturing issues.

Essential Functions:
1. Manufacture a wide variety of composite aircraft parts to meet manufacturing specifications, in a team oriented work environment. 2. Demonstrate the ability to meet the requirements of the Manufacturing Competencies at the appropriate level in the Employee Effectiveness Review. 3. Proficient at reading work orders, blueprints, specifications, lofts, sketches and operation sheets to determine sequence of operations. 4. Must be skilled in the use of special tools and equipment to include precision measuring devices such as 6" scale, 1" micrometer, 6" dial caliper. 5. Check all work and ensure a defect free assembly prior to inspection. 6. Maintain and use all logs and records. Example: MIR sheets, DMTs, Crabs, PCOs, DR/DI, etc. 7. Maintain a neat and orderly work area, support the company FOD and 5S programs, and comply with all safety regulations. 8. Support Lean activities. 


Additional Functions: 1. Perform other duties as assigned. 


Education and Experience Requirements:


High School graduate or GED. Basic computer skills.
Three (3) years of related composite experience.
Ability to work with composite resins and materials.
Requires ability to read and interpret blueprints.
Must be able to use mathematical formulas to solve dimensional problems using fractions and decimals.



Other Requirements: 1. Must be able to meet the physical requirements of the position. 2. Must be able to work any shift.
 
 
Job Number: 1810092566
Job Location: Tulsa, OK
Per Diem: No
Duration: 0 months
Input Date: 07/25/2019
Last Updated: 11/18/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Donnell Covington
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002f3lEAAQ&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
Location: Fort Worth, TX
Rate: $71.14/HR
Duration: 10 month contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****

Job Description:
- Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design.
- Verify the aero source tool will support shop floor, flight line, and off-site aircraft build and operations.
- Will support validation that aero source will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations.
- Will work production floor support from receipt of problem, coordination of answer to release of engineering change.
- Design, develop, and test a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight.
- Establishes structural specifications, performs stress analysis, and conducts performance tests.

Education / Experience:
- Level 4: BS+16 YRS or MS+14 YRS
- Prior F-16 design experience is desired but, not required.
- Past work experience using CATIA V4 and F-16 EBOM system (MPRSII) is highly desired.
- Design experience sought after covers systems installation and equipment installation however, airframe design experience (primary and secondary structure) is also acceptable.
- Past F-22 design experience is desired.
 
Job Number: 10788
Job Location: Fort Worth, TX
Rate: $71.14/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 10 mos
Start Date: ASAP
Input Date: 10/10/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Air Data Systems Engineer (Flight Controls Dept)

Description:
As the Air Data Systems Senior Engineer you will report to the Flight Control Systems IPT Lead and be responsible for all activities related to the air data systems for the jet. In addition to a more traditional Air Data system this aircraft may require development of an optical air data sensing system to enable our Mach Cutoff System (MCS) control concepts.

On any given day you might:
  • Develop air data systems design, architecture and support product plan development, including qualification and certification plans
  • Provide subject matter expert level technical leadership, mentoring and guidance on both practical and theoretical aspects of air data systems
  • Define requirements for the air data systems to ensure compliance with regulations and customer requirements
  • Research new air data concepts and technologies that fit the Aerion technology roadmap
  • Provide validation and verification of air data systems requirements

    We're looking for someone who has:
  • Bachelor’s Degree in relevant engineering area, with a Master’s degree in a technical and/or management specialty preferred
  • 10+ years of deep, hands-on experience in air data and avionics systems development, design and testing in a Military, Commercial, or business aircraft development program
  • 8+ years of demonstrated experience specific to air data systems, air data technical principles and technologies, and managing system suppliers as the technical point of contact
  • In-depth and current knowledge of Part 25 regulatory requirements, including air data specific certification requirements (e.g. RVSM)
  • Experience and expertise in the development of commercial and/or high-end business jets strongly desired, including flight test experience
  • Recent experience in developing air data, avionics and other aircraft systems, such as Automatic Flight Control System (AFCS), from concept through certification strongly desired
  • Optical air data systems experience desired
  • Demonstrated ability to understand & define requirements, generate architecture, and achieve compliance
     
  • Job Number: 42-030
    Job Location: Reno, NV
    Rate: DOE, but very competitive
    Per Diem: YES
    Overtime: Possible
    Duration: 1+ years
    Start Date: ASAP
    Input Date: 10/23/2019
    Last Updated: 11/12/2019
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Email: matt@precisionpersonnel.com
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Aircraft Assembler - 10 openings / F-16 F-35 C-130 FL

    Description:
    Job Title: Aircraft Assembler
    Work Site Address: Pinellas, FL 33782
    Job Number: 472802
    Max Pay Rate: $22/hr
    Start Date: 8/27/2019
    End Date: Contract to LM Employee
    Position Type: Contract to hire possible

    Job Summary:
    Performs a variety of operations to manufacture, assemble and/or refurbish aircraft parts and structures such as F-16 canopies, F-35 canopies, and C-130 sub-assembly components. Assemblies can require controlled tooling as well as build to print.

    Job Description:
    Tasks include aligning parts on jigs using both templates and fixtures. Performs part-fitting operations such as minor filing, sawing, burring, crimping, trimming, framing, drilling, reaming, riveting, countersinking, and cold working. Measures parts with a variety of methods to verify dimensions. May modify incomplete and complete assemblies to incorporate changes and perform repairs. Works from blueprint diagrams, drawings, specifications, and shop orders. Monitors and verifies quality and develops corrective action. Performs other duties as assigned. No relocation assistance provided.

    Qualifications and Education Requirements
    1 - 2 years of sheet metal assembly/aircraft sheet metal structure experience is required.
    Previous experience as an Assembler and/or Aircraft Structures Mechanic is highly preferred.
    Previous aircraft structure on the F-16, C-130, and F-35 is highly preferred.
    Interpersonal skills and ability to interface with all levels, to work in teams or independently and communicate effectively with co-workers or supervisory staff.
    High School Diploma or equivalent.
    Mathematical ability to perform and/or understand the calculations used in assigned areas and ability to read and interpret blueprints, specifications and technical data.
    Competently uses computers and other systems to access, maintain and manipulate data.


    M,T,W,Th 10 Hours, Friday Off
    6:00am to 4:30pm. Or 6:30am to 5:00pm
     
    Job Number: LMPIN-472802
    Job Location: Pinellas, FL
    Rate: 22/hr max
    Duration: CTH
    Input Date: 09/05/2019
    Last Updated: 10/24/2019
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    Aircraft Door Design Engineer

    Description:
    General Summary:
    Engineer, Doors Design is responsible for the conceptual design and production engineering of Aircraft Doors structural and system components. The candidate will be responsible for conceptual layout, detailed design and aircraft production & in-service design and modification.

    Duties and Responsibilities:
    1. Generates Engineering Models and Drawings utilizing CATIA Version 5.
    2. Performs trade studies to identify optimal engineering solution.
    3. Collaborates with the Integrated Product Team to resolve cross functional issues.
    4. Reviews work performed by others and ensure work is to the highest standard.
    5. Implements Industry best engineering practices (design for manufacturing, design for reliability and design for maintainability).
    6. Have the ability to understand and apply certification requirements.
    7. Implement design solutions optimized for cost and weight.
    8. Manages task execution to ensure on-time and on-target completion.
    9. Utilizes drafting and Geometrical Dimensioning &Tolerancing knowledge to optimize part design for cost and functionality.
    10. Searches for problem root cause and develop corrective action plans and solutions.
    11. Serves as an interface within the Doors Engineering group to ensure effective communication, coordination, and timely completion of project milestones.
    12. Leads or participates in design / development reviews with management and internal customers. The candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience.

    Education, Work Experience, Certification and/or Licensure:

    1. BS in Mechanical Engineering with a minimum of 10 years directly related experience designing aviation systems; experience can be substituted for the lack of an appropriate degree
    2. Some Travel may be required

    Knowledge, Skills and Abilities:
    1. Proficient in use of CATIA Version 5.
    2. Advanced knowledge of drafting rules.
    3. Advanced knowledge of Geometrical Dimensioning and Tolerancing.
    4. Proficient in Microsoft Office Products.
    5. Use of Team Center.
    6. Familiar with FAR Part 23 or Part 25.
    7. Functional knowledge of SAP.



    The Structures Company is an AA/EOE.
     
    Job Number: 321
    Job Location: NC
    Rate: $60/Hr.
    Per Diem: Yes
    Overtime: Yes
    Duration: 12+ Months
    Start Date: ASAP
    Input Date: 11/06/2019
    Last Updated: 11/18/2019
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Email: debbieaubert@thestructurescompany.com
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Aircraft ECS Control Systems and Simulation Engineer - China

    Description:
    Our Aerospace Client based in China is looking for additional Engineering Support . They require an Aircraft ECS Control Systems and Simulation Engineer

    This is an exciting opportunity to work in East Asia , contributing to the success of our Client's Aircraft Program. Excellent salary / remuneration for suitable skilled and qualified candidates.

    Candidates should be prepared to live and work in Shanghai on a fixed term contract basis for 2-3 years.

    Responsibilities:

    In charge of ECS system control laws and logic design and
    establishing relative guide and process.
    In charge of simulating system control laws and logic and establishing relative guide and process.
    In charge of verifying system control laws and logic simulation.
    In charge of integrating system real time simulation.
    In charge of studying system control simulation new technology.
    In charge of training of system control simulation.


    Skills/ Qualifications / Experience Sought:


    Skilled in MatLab simulink tool and other simulation tools.
    Skilled in system control laws and logic design.
    Skilled in simulating system control laws and logic design.
    Versed in integrating and revising real time simulation.
    Familiar with DO-178B/C.
    Familiar with real time simulation industry standard, guides and new technology.
    Experience in civil aircraft real time simulation design.
    10 years ECS system control real time simulation experience.
    Fluent English, with good communication skills.
     
    Job Number: BH-56-1
    Job Location: Shanghai, China
    Rate: Good Package / Rate - Negotiable
    Per Diem: --
    Overtime: --
    Duration: 2-3 years
    Start Date: 07/18/2019
    Input Date: 07/19/2019
    Last Updated: 09/16/2019
    Firm Name: STRONGFIELD TECHNOLOGIES USA INC
    Attention: Adrian Medhurst
    Address: 5000 BIRCH ST STE 3000
    City, State: NEWPORT BEACH, CA 92660
    Website: www.strongfield.com

    Aircraft Electrician 3

    Description:
    NOTE: US Citizen. PFT, Audio Hearing Exam and Medical Physical required to start.

    Chipton-Ross is seeking an Aircraft Electrician 3 for an opportunity in Moss Point, MS.

    RESPONSIBILITIES:
    Performs all duties required to lay out, fabricate, and install electrical wiring or coaxial cable on aircraft. Checks, tests, and troubleshoots electrical systems for conformance to specifications and performs repair, removal, and reinstallation of wiring as necessary. Cuts wire to length, strips insulation from wire ends, and insulates connections with plastic sleeves. Attaches wire or complicated electrical systems to fixtures and accessories such as transformers, instrument panels, and switchboards with fasteners such as bolts, screws, or solder. May monitor and verify quality in accordance with statistical process or other control procedures.

    REQUIRED EXPERIENCE:
    High school diploma or equivalent and 4 years' related experience.

    EDUCATION:
    High school diploma or equivalent is required.
    School must be accredited.

    HOURS:
    4/10 workweek and must be able to work 1st OR 2nd shift IF required.

     
    Job Number: 181305
    Job Location: Moss Point, MS
    Rate: Up to $27.00 DOE
    Duration: 1 year
    Input Date: 08/27/2019
    Last Updated: 11/18/2019
    Firm Name: CHIPTON ROSS
    Attention: Christopher Conaway
    Address: 420 CULVER BLVD
    City, State: PLAYA DEL REY, CA 90293
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: cconaway@chiptonross.com
    Website: www.chiptonross.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Aircraft Fuel Systems Engineer - China

    Description:
    Our Aerospace Client based in China is looking for additional Engineering Support . They require an Aircraft Fuel Inerting Systems Engineer

    This is an exciting opportunity to work in East Asia , contributing to the success of our Client's Aircraft Program. Excellent salary / remuneration for suitable skilled and qualified candidates.

    Candidates should be prepared to live and work in Shanghai on a fixed term contract basis for 1-3 years.

    Responsibilities:

    Fuel system performance simulation and analysis.
    Inerting system performance simulation and analysis.
    Fuel tank flammability analysis .
    Fuel and inerting system tube stress analysis.
    Fuel and inerting system simulation platform building.

    Skills/ Qualifications / Experience Sought:

    Experience working for main OEM or fuel and inerting system supplier for more than
    20 years.
    Experience on fuel and inerting system simulation more than 15 years.
    Familiar with simulation software, such as Flowmaster, Fluent, CAEPipe, Matlab, Abaqus, etc.
    Fluent English, with good communication.
     
    Job Number: BH-55-1
    Job Location: Shanghai, China
    Rate: Good Package / Rate - Negotiable
    Per Diem: --
    Overtime: --
    Duration: 2-3 years
    Start Date: 07/18/2019
    Input Date: 07/19/2019
    Last Updated: 09/16/2019
    Firm Name: STRONGFIELD TECHNOLOGIES USA INC
    Attention: Adrian Medhurst
    Address: 5000 BIRCH ST STE 3000
    City, State: NEWPORT BEACH, CA 92660
    Website: www.strongfield.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Aircraft Hydraulics / Pneudraulics Maintenance / wheels and tires SC

    Description:
    1886-1 Hydraulics/Pneudraulics
    Work Location: Greenville, SC
    Status: Open

    This position requires AIRCRAFT Hydraulics maintenance experience.

    Qty: 1
    Desired Start Date: 8/16/2019
    End Date: 1/4/2020

    Job Description:
    The hiring manager is looking for people that have knowledge and understanding of the basic operations of aircraft hydraulics. This position will not necessarily be doing hydraulic operations 24/7 but will instead spend most of the time (not all) manufacturing hydraulic and oxygen lines, tear down and build up of wheels and tires, hydraulic fuel sampling, and working on hydraulic support equipment used on aircraft.

    Aircraft Hydraulics maintenance. Performs test and checkout of mechanical, electrical, propulsion, structural, hydraulic subsystems and complete systems located at field locations away from primary company operations. Verifies and corrects such things as welds, sheet metal assemblies, controls, alignment of equipment.

    Fabricates Fluid lines and Cables
    Build up of wheels and tires
    Performs Test Bench Checkouts and Testing
    Hydraulic Fluid Sampling

    Contractor must be willing to learn and be trained.
    Hydraulic experience is required


    Pay Rate: $25.00 - $29.00 Hourly

    Skills Required
    Areas of Expertise Hydraulics Yes 1 2 - 4 Years
    Areas of Expertise Wheels No 2 < 1 Year
     
    Job Number: JE-1886-1
    Job Location: Greenville, SC
    Rate: 25-29/hr max
    Duration: 5 months +
    Input Date: 08/22/2019
    Last Updated: 09/13/2019
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Aircraft Interior Design Engineer

    Description:
    The Interior Design Engineer will perform interior design engineering for cabin & cockpit structures, components, and trim for aircraft. The individual will also on occasion support tasks associated with interior Installations.

    Duties and Responsibilities:
    1. Creates conceptual designs for interiors of the aircraft through 3D modeling software, drawings, and/or drafting application.
    2. Develops designs for form/fit/function to meet customer and design criteria.
    3. Provides designs for the fabrication process including sheet metal, extrusions and inject molding
    4. Validates engineering designs per engineering core principles, design standards, processes and industry best practices.
    5. Makes recommendations to engineering lead/management.
    6. Researches and maintains up to date knowledge of technical data pertaining to cabin, cockpit structures, hardware, material, and finishes.
    7. Ensures adherence to program schedule.
    8. Performs other duties as assigned.

    Education, Work Experience, Certification and/or Licensure:
    1. 3+ years of engineering experience with at least three years of design engineering experience directly related to mechanical/interior design for commercial aircraft.

    Knowledge, Skills and Abilities:
    1. Working knowledge of conceptual design development of aircraft interiors.
    2. Working knowledge of industry standard (i.e. - parts lists, bill of materials, parts and standards callout, etc).
    3. In-depth knowledge of Geometric Dimensioning and Tolerancing (GD&T).
    4. Familiarity with 14CFR Part 23/25.
    5. Proficiency in CATIA V5 workbenches.
    6. Proficiency in Teamcenter (or equivalent PLM tool).
    7. Ability to work independently or within a team environment.
    8. Ability to communicate effectively throughout all levels within an organization and present data clearly and concisely.
    9. Ability to work cross functionally with Quality and Production to resolve issues on the production line.


    The Structures Company is an AA/EOE.
     
    Job Number: 322
    Job Location: NC
    Rate: $52-$60/Hr. **DOE**
    Per Diem: Yes
    Overtime: Yes
    Duration: 12+ Months
    Start Date: ASAP
    Input Date: 09/12/2019
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Aircraft Lighting Engineer

    Description:
    Here's the Deal
    As Aircraft Lighting Engineer you will report directly to the Vice President of Cockpit and Subsystems and be responsible for defining the technical requirements relating to performance, design, integration and testing of the Interior, Exterior and Emergency lighting systems for the Aerion AS2 supersonic business jet.

    On any given day you might:
    • Perform analysis and design relating to placement of lights on the AS2
    • Provide aircraft level lighting guidance
    • Establish requirements, processes and methodologies relating to the lighting system
    • Calculate and validate lighting performance
    • System design and architecture analysis
    • Interact directly with suppliers
    • Define traceability to the FARs
    • Perform and teach electromagnetic compatibility design and analysis
    • Perform computational electromagnetics calculations and assessments
    • Validate and verify requirements
    • Provide guidance for System test and certification
    • Report Status
    • Provide guidance to the various Sub-systems and Structures IPTs in support of their development and certification
    • Provide subject-matter expert level guidance on both practical and theoretical aspects of the lighting systems design
    • Provide support for engineering, certification, and flight test departments from concept to product certification
    • Foster a culture that inspires high levels of performance and employee retention

    We're looking for someone who has:
    • Bachelor’s degree in relevant field required
    • 3+ years of relevant experience
    • Lighting systems design and integration experience
    • Aircraft development experience
    • Experience developing processes, guidelines, and methodologies to support the development of the Aerion AS2
    • A clear understanding of industry guidelines and documents relevant to the design and certification of the lighting system

    We want to build a company around people who are:
    • Highly self-motivated with a strong bias for action
    • Effective at nurturing strong professional relationships
    • Committed to fostering a culture of empowerment & creativity
     
    Job Number: 42-031
    Job Location: Reno, NV
    Rate: D.O.E.
    Per Diem: YES
    Overtime: Possible
    Duration: 1+ Year
    Start Date: ASAP
    Input Date: 08/23/2019
    Last Updated: 09/16/2019
    Firm Name: PRECISION PERSONNEL INC
    Attention: Brandon
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Aircraft Mechanic I - Clearance KY

    Description:
    16537 Job Title: SCA Aircraft Mechanic I
    Work Site Address: Lexington, KY 40516
    Job Number: 1746-1
    Max Pay Rate: $30.29/hr
    Start Date: 7/15/2019
    End Date: 10/13/2019
    Position Type: Contract

    • Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company.

    Job Summary:
    The Aircraft Mechanic I (Electrical)troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems. This mechanic repairs, replaces, and rebuilds aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and equipment such as shears, sheet metal brake, welding equipment, rivet gun, and drills. This worker reads and interprets manufacturers' and airline's maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. This mechanic performs 100-hour, progressive, isochronal, phase, periodic, and other hourly or calendar inspections, examines reciprocating engines for cracked cylinders and oil leaks, and listens to operating engine to detect and diagnose malfunctions, such as sticking or burnt valves, inspects jet engines and components for cracks, corrosion, foreign object damage, burned areas, distortions, security, warping, wear, and missing segments. Inspects jet engine turbine blades to detect cracks, distortion, corrosion, burn-out, security, or breaks, tests engine operation, using testing equipment, such as ignition analyzer, compression checker, distributor timer, ammeter, and jet calibration (Jetcal) tester, to locate source of malfunction. Work involves: replacing or repairing worn or damaged components, such as carburetors, alternators, magnetos, fuel controls, fuel pumps, oil pumps, and engine mounted gearboxes, and compressor bleed valves using hand tools, gauges, and testing equipment; removing engine from aircraft, using hoist or forklift truck, disassembling and inspecting parts for wear, cracks, security, or other defects, and repairing or replacing defective engine parts and reassembles and installs engine in aircraft. Job duties require that this mechanic: adjusts, repairs, or replaces electrical wiring system and aircraft accessories, performs preflight, thru-flight, and post-flight maintenance inspections, performs miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens and filters, greasing moving parts, and checking brakes. This incumbent supervises the jacking and towing of aircraft, enters in the maintenance records description of the work performed and verifies the work was performed satisfactorily, may service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition, may specialize in work, repair and modification of structural, precision, and functional spare parts and assemblies, and may specialize in engine repair. This worker may be required to be licensed by Federal Aviation Administration.

    Qualifications and Education Requirements
    Applicant must have H-60 experience. H-47 experience is also welcome.
    -Applicant must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts.
    -Applicant must have experience installing and testing of electrical/avionic systems. Experience in wiring schematics and wire running of Aircraft a plus.
    -Applicant must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers.
    This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.
    Must be able to prioritize workload to maintain schedules on assigned projects.
    -Applicant must be able to travel when required. This requirement may encompass 20% - 40% of the work year.
    -Applicant must be able to work Overtime as needed.
    -Applicant must be able to work multiple shifts as required for need of schedule/budget.

    Preferred Skills
    Applicant shall be familiar with the MOC’s and troubleshooting of engine control systems, ASE, directional and communications radios, CAAS cockpit integration, digital auto-pilot and Stabilator.
    -Applicant shall be proficient in reading and interpreting schematics, engineering drawings and technical manuals.
    -Applicant shall be familiar with documenting work in logbook, performing PMD and 40 Hour inspections.
    -Applicant shall be able to perform fuel systems checks to include refuel and defuel operations and checking valve logic, fuel operations testing and MOC. Troubleshooting of fuel system to include but not limited to electrical, fuel flow rates, and mechanical failures.
    -Applicant shall be knowledgeable of APU operations and troubleshooting, aircraft generator troubleshooting to include electrical and mechanical failures. Service hydraulic systems, engine, transmission and gear boxes. Perform flight control rigging, MOC’s and troubleshooting to include but not limited to electrical, hydraulic and mechanical failures.
    -Applicant shall be able to assist Quality in performing aircraft weight and balance and preparing aircraft for flight. Additional duties to include removal and reinstallation of aircraft panels, cabin floors, cabin and cockpit doors.
    -Applicant shall be able to assist in performing structural and mechanical modifications and repairs if necessary/required.

    Qty 4 positions needed
    This position is for an Electrical/Avionics mechanic. The candidate will be working on electrical modifications and repairs.
     
    Job Number: JE-1746-1S
    Job Location: Lexington, KY
    Rate: 30.29/hr max
    Duration: 3 months
    Input Date: 09/16/2019
    Last Updated: 10/16/2019
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    Aircraft Mechanic II

    Description:
    Chipton-Ross is seeking an Aircraft Mechanic II for an opening in Lexington, KY.

    RESPONSIBILITIES
    This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals. Job requirements: must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects.

    REQUIREMENTS
    Desired Applicant must have experience and ability to operate or perform one or more of the following:
    Aircraft structural experience in modification to include but not limited to structural TM/TO repairs, build to print assembly and installation. The candidate must have a common knowledge of tooling required for performance of aircraft structural work. Must be a qualified aviation sheet metal mechanic, employee must have experience in aviation sheet metal, hardware installation such as rivet installation, HI-Loc installation, etc. Candidate must have fabrication to facilitate plane side repairs.
    Candidate must have advanced sheetmetal skills that can work with little direction on complex modifications.
    - Must be able to work shift schedules during this duration as required by program schedule and customer requirements.
    - Candidate must have a high school diploma, or equivalent.
    - Minimum 3 years intermediate level aircraft repair or modification experience required.
    - Must be proficient in reading and interpreting schematics, engineering drawings and technical manuals / technical orders.
    - Minimum 3 years experience with one of the listed airframes H-60, AH-64, CH-47 or OH-58.

    DESIRED
    MH-60M experience preferred.
    - Documented Military/DOD Service School or Civilian/FAA equivalent training desired.
    - Depot Maintenance Repair experience

    WORK SCHEDULE
    4/10

    MISCELLANEOUS:
    Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
     
    Job Number: 180169
    Job Location: Lexington, KY
    Rate: Up to $31.59 DOE
    Duration: 3 Months
    Input Date: 07/02/2019
    Last Updated: 11/18/2019
    Firm Name: CHIPTON ROSS
    Attention: Melody Mullins
    Address: 420 CULVER BLVD
    City, State: PLAYA DEL REY, CA 90293
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: mmullins@chiptonross.com
    Website: www.chiptonross.com

    Aircraft Mechanic II

    Description:
    Chipton-Ross is seeking an Aircraft Mechanic II for an opportunity in Lexington, KY

    RESPONSIBILITIES:
    This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals.

    REQUIRED EXPERIENCE:
    must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects.
    - Minimum 3 years intermediate level aircraft repair or modification experience required.
    - Must be proficient in reading and interpreting schematics, engineering drawings and technical manuals / technical orders.
    - Minimum 3 years experience with one of the listed airframes H-60, AH-64, CH-47 or OH-58.

    Desired skills :
    MH-60M experience preferred.
    - Documented Military/DOD Service School or Civilian/FAA equivalent training desired.
    - Applicants with a current active Secret level security clearance.
    - Depot Maintenance Repair experience

    EDUCATION:
    Accredited High School Diploma/GED

    MISCELLANEOUS:
    Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

    WORK HOURS:
    Full-Time, 4/10
    Must be able to work shift schedules during this duration as required by program schedule and customer requirements.
     
    Job Number: 180155
    Job Location: Lexington, KY
    Rate: $DOE
    Duration: 3 MONTHS
    Input Date: 07/01/2019
    Last Updated: 11/18/2019
    Firm Name: CHIPTON ROSS
    Attention: Emmanuel Morgan
    Address: 420 CULVER BLVD
    City, State: PLAYA DEL REY, CA 90293
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: emorgan@chiptonross.com
    Website: www.chiptonross.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Aircraft Mechanic II - Clearance KY

    Description:
    165377 Job Title: SCA Aircraft Mechanic II
    Work Site Address: Lexington, KY 40516
    Job Number: 1749-1
    Max Pay Rate: $31.59/hr
    Start Date: 7/15/2019
    End Date: 10/13/2019
    Position Type: Contract
    • Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company.

    Job Summary:
    This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals. Job requirements: must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects.


    Qualifications and Education Requirements
    Desired Applicant must have experience and ability to operate or perform one or more of the following:
    Aircraft structural experience in modification to include but not limited to structural TM/TO repairs, build to print assembly and installation. The candidate must have a common knowledge of tooling required for performance of aircraft structural work. Must be a qualified aviation sheet metal mechanic, employee must have experience in aviation sheet metal, hardware installation such as rivet installation, HI-Loc installation, etc. Candidate must have fabrication to facilitate plane side repairs.
    Candidate must have advanced sheetmetal skills that can work with little direction on complex modifications.
    - Must be able to work shift schedules during this duration as required by program schedule and customer requirements.
    - Candidate must have a high school diploma, or equivalent.
    - Minimum 3 years intermediate level aircraft repair or modification experience required.
    - Must be proficient in reading and interpreting schematics, engineering drawings and technical manuals / technical orders.
    - Minimum 3 years experience with one of the listed airframes H-60, AH-64, CH-47 or OH-58.

    Preferred Skills
    MH-60M experience preferred.
    Documented Military/DOD Service School or Civilian/FAA equivalent training desired.
    Depot Maintenance Repair experience

    Qty 8 positions needed
    This position is for a structural mechanic. The candidate will be working on structural modifications and repairs.
     
    Job Number: JE-1749-1S
    Job Location: Lexington, KY
    Rate: 31.59/hr max
    Duration: 3 months
    Input Date: 09/16/2019
    Last Updated: 10/16/2019
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    Aircraft Mechanic II - Structural

    Description:
    Chipton-Ross is seeking 10 Aircraft Mechanic II's for openings in Jacksonville, FL.

    RESPONSIBILITIES:
    This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals. Job requirements: must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects.

    REQUIRED EXPERIENCE:
    Minimum 5 years of aircraft structural repair.

    EDUCATION:
    Accredited High School Diploma or GED

    FULL TIME/VARIABLE SHIFT
    WORK HOURS: This position may require 2nd or 3rd shift assignments and overtime as requested by management.

     
    Job Number: 180533
    Job Location: Jacksonville, FL
    Rate: $DOE
    Duration: 12 Months
    Input Date: 07/19/2019
    Last Updated: 11/18/2019
    Firm Name: CHIPTON ROSS
    Attention: Johnnie Barrientos
    Address: 420 CULVER BLVD
    City, State: PLAYA DEL REY, CA 90293
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: jbarrientos@chiptonross.com
    Website: www.chiptonross.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Aircraft Mechanic or (Automotive Trade School experience)

    Description:
    The candidate will consistently and accurately disassemble, clean, evaluate, perform repairs, modifications and assembly on Airframe and Driveshaft components in accordance with approved data.

    Assigned Duties:
    • Work independently with limited supervision.
    • Use precision measuring instruments and gauges such as feeler gauges, dial indicators, micrometers, calipers.
    • Perform repair of detail components by filing, stoning, lapping and polishing.
    • Using power and hand tools for drilling, sanding and riveting.
    • Write in a clear and concise manner the results of evaluations and be able to communicate repair requirements for work performed within our facility or sent to outside sources.
    • Adhere to all EH&S requirements, FAA & EASA regulations, company rules, policies, procedures and corporate initiatives.
    • Follow procedures found in component maintenance manuals, service bulletins, ORI’s,
    OREI’s, drawings, check sheets, etc.
    • Must be competent in the use of torque wrenches and have a complete understanding of SAC torque specification SS9300.
    • Chemically treat repaired surfaces in accordance with approved data.
    • Review and interpret related paperwork to ensure proper identification of parts, operational sequence and record information on appropriate documentation.
    • Drill, ream, tap, change studs, install helicoils, install bushings and liners by shrink fitting and arbor press.

    Experience Required
    • High School Diploma or Equivalent required
    • Automotive trade school preferred

    FAA Airframe license preferred but not required.
     
    Job Number: 1910105868
    Job Location: Trumbull, CT
    Per Diem: split
    Overtime: possible
    Duration: 1.5 years
    Start Date: ASAP
    Input Date: 09/26/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Stephanie Spolzino
    Address: 50 FOUNDERS PLAZA STE 304
    City, State: EAST HARTFORD, CT 06108
    Phone: 860/289-2643
    800 Phone: 866/636-4723
    Fax Phone: 800/556-5284
    Website: www.pdstech.com

    Aircraft Painter I

    Description:
    PDS is seeking an Aircraft Painter for an open position in Savannah, GA.

    The Aircraft Painter I prepares the aircraft for paint related operations by performing tasks safely within schedule while meeting quality expectations. 


    Principal Duties and Responsibilities 
    • Mask, sand, and prepare aircraft for paint application.
    • Apply glazing and sealing compounds in preparation for final painting.
    • Operate and maintain all types of preparation and priming equipment. Mix paints and primers. 
    • Perform leading edge sealant work in final detail.
    • Comply with all safety, 5S, and housekeeping policies.
    • Use personal protective equipment and ensure aircraft interior is protected (PTP). 
    • Properly care for and maintain shop equipment and tools as assigned.
    • Comply with Paint shop standard practices.
    • Perform other duties as required. 


    Additional Functions:
    Properly care for and maintain shop equipment and tools as assigned.
    Comply with Paint shop standard practices.
    Perform other duties as required.   
     

     


     

    Education and Experience Requirements: 
    High school diploma/GED. One (1) year of painting experience.
    A working knowledge of paint processes and products (lacquers, enamels, epoxies, urethanes, and acrylics).

    Unique Skills:



    Must be able to work well with a team.




    Other Requirements:



    •  Ability to read, write, speak, and understand the English language.
    •  Ability to read and interpret blueprints and engineering documentation.
    • Able to pass Pulmonary Function Test to obtain respirator certification.
    • .Ability to use tools, equipment, and materials in the aircraft painting process.
    • Able to climb ladders and stairs, perform close tolerance work, work in small spaces lift up to 40 pounds and work any shift.
    •  Must be computer literate.


     





     


     
    Job Number: 1910104927
    Job Location: Savannah, GA
    Duration: 6 months
    Input Date: 08/01/2019
    Last Updated: 11/18/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Lynn Byers
    Address: 2154 N CENTER ST STE 405D
    City, State: NORTH CHARLESTON, SC 29406
    800 Phone: 866/224-2745
    Email: southeastjobs@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GVGjQAO&URLSource=cjhunter

    Aircraft Plumber

    Description:

    PDS is seeking a Aircraft Plumber  for an open position in Savannah, GA.


    Under general supervision, fabricates, troubleshoots and repairs water, oxygen, and vent systems using aircraft specifications and design/engineering drawings.
    Must have 2 years experience as an Aircraft Plumber     

    Essential Functions:
      1. Performs tasks layout, tube/hose fabrication and installation of parts, subassemblies and assemblies for aircraft water, drain, vent, pitot static and oxygen systems. 2. Safely operates equipment such as arbor press, flaring and de-burring machine, punch press, riveting equipment, nitrogen, water and oxygen servicing equipment, pitot static test equipment and other related testing equipment. 3. Identifies and uses common aircraft hardware, fittings and hoses in accordance with FAA requirements, Gulfstream procedures and accepted shop practices. 4. Complies with the inspection/documentation process for any components/systems fabricated, installed and tested. 5. Accomplishes all required paperwork and documentation as required by FAA requirements and Repair Station manual. 6. Complies with all safety, 5S, and housekeeping policies. Uses personal protective equipment and ensures that aircraft interior is protected (PTP).

    Additional Functions:

    • Performs other duties as required.   

    Education and Experience Requirements:


    High school diploma/GED.
    Must have two (2) years of aircraft plumbing experience or aircraft systems.

    Unique Skills:

    Previous Aircraft experience along with Solumina, Catia V5, and SmarTeam experience preferred.



    Other Requirements:
    • Ability to read write, speak, and understand the English language.
    • Ability to read, and interpret blueprints and engineering documentation.
    • Ability to use tools and equipment associated with aircraft plumbing systems.
    • Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift.
    • Must be computer literate.

     
    Job Number: 1910102013
    Job Location: Savannah, GA
    Duration: 6 months
    Input Date: 05/06/2019
    Last Updated: 11/18/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Clyde Callwood
    Address: 3922 COCONUT PALM DR STE 100
    City, State: TAMPA, FL 33601
    800 Phone: 866/224-2745
    Email: southeastjobs@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033gbsQAA&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Aircraft Safety Assessment Expert - China

    Description:
    Our Aerospace Client based in China is looking for additional Engineering Support . They require an Aircraft Safety Assessment Expert.

    This is an exciting opportunity to work in East Asia , contributing to the success of our Client's Aircraft Program. Excellent salary / remuneration for suitable skilled and qualified candidates.

    Candidates should be prepared to live and work in Shanghai on a fixed term contract basis for 1-3 years.

    Main Responsibilities:

    • Primarily work on the aircraft's safety assessment.
    • Take charge for PRA and CMA.
    Skills/ Qualifications / Experience Sought:
    • Over 10 years safety assessment and certification experience.
    • Strong experience of Particular Risk analysis (PRA),especially
    • Survivability of Systems, Aft Pressure Bulkhead Rupture and Tail Strike.
    • Strong experience of Common Mode Analysis or certification.
    • Fluent English, with good communication skills.

     
    Job Number: BH-60-1
    Job Location: Shanghai, China
    Rate: Good Package / Rate - Negotiable
    Per Diem: --
    Overtime: --
    Duration: 2-3 years
    Start Date: 07/18/2019
    Input Date: 07/19/2019
    Last Updated: 10/08/2019
    Firm Name: STRONGFIELD TECHNOLOGIES USA INC
    Attention: Adrian Medhurst
    Address: 5000 BIRCH ST STE 3000
    City, State: NEWPORT BEACH, CA 92660
    Website: www.strongfield.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Aircraft Sheet Metal Mechanics

    Description:
    STS Technical Services offers Aircraft Sheet Metal Mechanic jobs for candidates with recent regional jet experience in Saint Louis, Missouri.

    Qualifications:
    Primary responsibilities will be working heavy checks in the hangar on EMB 145 and CRJ 700 regional jets in hangar and/or line maintenance environments
    Must have at least two-to-three years of major sheet metal repair and overhaul experience
    Experience working on EMB 145 & CRJ 700
    Candidate must be willing to work overtime
    About STS Technical Services:
    STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

    Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

    If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

    STS Technical Services is an equal opportunity employer.
     
    Job Number: 43887
    Job Location: St. Louis, MO
    Input Date: 08/28/2019
    Firm Name: STS AEROSTAFF SERVICES
    Attention: STS Technical Services
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 877/707-5767
    Fax Phone: 877/707-5767
    Website: www.stsaviationgroup.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Aircraft Sheet Metal Mechanics

    Description:
    STS Technical Services is hiring Aircraft Sheet Metal Mechanics in Nashville, Tennessee.

    Job Duties:
    Will be working a WiFi project as well as other projects, and heavy checks
    Qualifications:
    Must have at least 5+ years’ experience on Regional or Commercial aircrafts in an MRO setting (this does NOT include production setting experience)
    An A&P license is strongly preferred but not required
    About STS Technical Services:
    STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

    Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

    If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

    STS Technical Services is an equal opportunity employer.
     
    Job Number: 47582
    Job Location: Nashville, TN
    Input Date: 08/28/2019
    Firm Name: STS AEROSTAFF SERVICES
    Attention: STS Technical Services
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 877/707-5767
    Fax Phone: 877/707-5767
    Website: www.stsaviationgroup.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Aircraft Sheet Metal Mechanics

    Description:
    STS Technical Services is hiring Aircraft Sheet Metal Mechanics in Milwaukee, Wisconsin!

    Contract Length: 4+ months with the opportunity of going direct.
    Start Date: ASAP
    Pay Rate: Extremely competitive. Contact an STS Recruiter at 1-800-359-4787 for full compensation / benefits details.
    Experience Required: Three (3) or more years — Entry-level candidates will be considered but at a different pay rate than experienced candidates

    Aircraft Sheet Metal Mechanic Job Duties:
    Work will be performed on CRJ 200 aircraft (prior experience working on this aircraft is preferred)
    Maintain, modify and install the various components of aircraft sheet metal
    Repair, rework, install and fabricate the complex aircraft structural assemblies, both internal and external
    Perform checks; carry out inspections and removal of components
    Study technical manuals, blueprints and engineering drawings
    Provide assistance to aircraft technicians and mechanics on various tasks
    Perform final checks on assembly and installation of parts that were replaced
    Maintain and keep track of all the maintenance records
    Adhere to company policies and safety programs
    Qualifications:
    Active FAA Aircraft & Powerplant Certifications are not required for Aircraft Sheet Metal Mechanics but they are highly preferred
    Three (3) years of maintenance experience with at least 12 months on the CRJ (in lieu of CRJ maintenance experience, we will consider candidates with six (6) or more years of aircraft sheet metal experience)
    Entry-level candidates will be considered but at a different pay rate than experienced candidates than experienced candidates
    About STS Technical Services:
    STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

    Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

    If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

    STS Technical Services is an equal opportunity employer.
     
    Job Number: 48764
    Job Location: Milwaukee, WI
    Input Date: 08/28/2019
    Firm Name: STS AEROSTAFF SERVICES
    Attention: STS Technical Services
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 877/707-5767
    Fax Phone: 877/707-5767
    Website: www.stsaviationgroup.com

    Aircraft Sheet metal Technician

    Description:
    Position Purpose:
    The Sheet metal Technician Senior works under minimal supervision to safely lay-out, fabricate and install parts equipment and fabricated items on aircraft following established operating procedures. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations. Mentor and train other Sheetmetal Technicians.

    Principle Duties and Responsibilities:
    1. Use complicated schematics/blueprints, engineering drawings and technical instructions to safely perform sheet metal layout, fabrication, and installation of parts, equipment or fabricated items on aircraft. Coordinate with supervision and Inspection to ensure compliance with internal and FAA paperwork, sign-offs and quality specifications.
    2. Mentor and train Sheetmetal Technicians, as required. Review their work prior to sign off to ensure work complies with quality control standards.
    3. Oversee projects or other technicians and assesses requirements of assigned tasks to procure required. materials and documentation for assigned tasks.
    4. Use blueprints to cut and form plastics and follow standard operating procedures when using adhesives, sealants and solvents.
    5. Utilizing tools as required. to shape and form complex angles and configurations according to blueprint specifications or written/verbal information.
    6. Safely operate shop equipment such as: brakes, presses, riveting equipment, shears, and hand tools associated with sheet metal functions. Use the proper hardware for various sheet metal applications.
    7. Comply with all safety, 5S, and housekeeping policies. Uses personal protective equipment as required. Ensures aircraft is protected (PTP).
    8. Conduct monthly 5S audits, as required.
    9. Use the material tracking system to create parts demand, track squawks and to sign-off work.
    10. Assist in developing initiatives to meet individual OGSM requirements, as required.
     
    Education and Experience Requirements:
    High School Diploma or GED required. Four (4) years of sheet metal and/or fabrication experience. Experience in aerospace industry preferred. Valid Driver’s License required.
    Other Requirements:
    1. Advanced knowledge of sheet metal or fabrication processes (forming, drilling, stamping, shaping, bending, punching, cutting, riveting, filing and dimpling).
    2. Ability to read and interpret blueprints and engineering documentation.
    3. Valid drivers license required. to operate towing and other Gulfstream transportation equipment.
    4. Ability to read, write, speak, and understand proficiently the English language.
     5. Demonstrates excellent communication skills, both verbal and written.
    6. Adapts to sudden schedule changes.
    7. Able to use tools and equipment associated with sheet metal work.
    8. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift.
    9. Must have a good working knowledge of computers and experience working with MicroSoft Office suite.
    10. Must be able to read, write, speak, and understand the English language.
     
     
    Job Number: 1910103713
    Job Location: Appleton, WI
    Duration: 12 months
    Input Date: 07/01/2019
    Last Updated: 11/18/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Kristen Schabell
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GQqOQAW&URLSource=cjhunter

    Aircraft Stress Engineer Openings

    Description:
    Aircraft Stress Engineers needed.
    MUST BE US PERSONS.
    BS Degree a MUST.
    FEMAP is a plus but not required.
    Strong classical analysis/hand calcs a MUST.

    REQUIRED SKILLS AND ABILITIES:
    1. Familiarity with Federal Aviation Regulations (FARs) governing aircraft certification.
    2. Strong understanding of aircraft structural modifications (both interior and airframe).
    3. Strong command of classical hand-analysis techniques.
    4. Proficient with the following software:
    a. Microsoft Word, Excel, PowerPoint, Outlook, and Internet Explorer.
    b. NASTRAN/FEMAP(basic user skill, proficiency a plus)
    c. AutoCAD (basic user skill, proficiency a plus)
    d. SolidWorks (basic user skill, proficiency a plus)
    e. Visual Basic or other coding skills a plus
    Final 1-2017
    5. Strong knowledge of Finite Element Modeling and Analysis techniques.
    6. Ability to interpret design drawings of various aircraft modifications and identify design changes required to
    ensure that sound load paths and structural integrity are maintained.

    MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
    1. Bachelor’s Degree in Aerospace, Aeronautical, or Mechanical Engineering or the equivalent.
    2. Five (5) or more years of experience working in aircraft stress analysis - airframe or interiors/completions on transport category aircraft, installation designs, including but not limited to Supplemental Type Certificate (STC) work, structural
    substantiation analysis and report development, aircraft modification designs under 14 CFR Part 25 STC
    projects, and test plans and test report authoring and review.

    The Structures Company LLC is an AA/EOE.
     
    Job Location: IN
    Rate: Open / DOE
    Per Diem: Yes
    Overtime: Yes
    Duration: Long-term
    Start Date: ASAP
    Input Date: 09/19/2019
    Last Updated: 11/18/2019
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Chris Sheets
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Email: ChrisSheets@thestructurescompany.com
    Website: www.thestructurescompany.com

    Aircraft Stress Engineers

    Description:
    Nastran, Patran a plus
     
    Job Location: GA/WI
    Input Date: 01/14/2015
    Firm Name: ADVANCED TECHNOLOGY
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Email: sclark@advancedtechno.com
    Website: www.advancedtechno.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Aircraft Structures Technicians

    Description:
    STS Technical Services is hiring Aircraft Structures Technicians in Great Falls, Montana.

    Duties & Responsibilities:
    Provide technical assistance or guidance to the crew.
    Communicate when tasks are complete so next trade can move onto the job.
    Ensure work environment is safe and clean.
    Promote company values, vision and mission. Demonstrated capability and competency in field of expertise.
    Excellent oral and written communication skills.
    Demonstrated ability to work well with other individuals throughout the organization.
    Possesses strong fundamental aircraft knowledge. Builds quality capability and responsiveness.
    Carry out maintenance repairs on customer aircraft.
    Sign work sheets and work cards for work accomplished – completely and accurately.
    Qualifications:
    2+ years’ aircraft structures maintenance experience as a structures technician required.
    Possess excellent oral and written communication skills required.
    Demonstrated ability to work well with other individuals throughout the organization.
    A&P License preferred.
    CRJ structures experience preferred.
    The physical demands described below are representative of those that must be met by an employee to successfully perform the essential functions of the job.
    The employee will be required to occasionally lift 50 pounds
    Bend, stoop, kneel, crawl, and climb ladders.
    Stand for extended periods of time
    Work at heights of greater than 10 feet utilizing fall restraint equipment as necessary.
    About STS Technical Services:
    STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

    Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

    If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

    STS Technical Services is an equal opportunity employer.
     
    Job Number: 48060
    Job Location: Great Falls, MT
    Input Date: 08/28/2019
    Firm Name: STS AEROSTAFF SERVICES
    Attention: STS Technical Services
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 877/707-5767
    Fax Phone: 877/707-5767
    Website: www.stsaviationgroup.com

    Aircraft Technician II

    Description:
    PDS Tech is seeking an RS Acft Tech II for an open position in Brunswick, GA.

    Under minimal supervision, performs inspections, maintenance, and repairs of moderate to advanced complexity on aircraft systems and structures. 

    Principal Duties and Responsibilities:

    Essential Functions:
    1. Communicate as required to receive and understand work assignments. Perform complex aircraft inspections, repairs, and modifications with minimal supervision.
    2. Coordinate with MTL, STM, and the Inspection Department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete CMP cards, work order sign-offs, and other paperwork in a timely and accurate manner. Assist as needed with shift turnovers.
    3. Ensure that all work accomplished meets quality standards and specifications.
    4. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely.
    5. Follow standard operating procedures when operating ground support equipment (external power carts, hydraulic mules, hydraulic lift platforms, tow tugs, forklifts, compressed gas cylinders, etc.)
    6. Coordinate, accomplish, and assist with aircraft movement in hangar and ramp areas.
    7. Provide training to less experienced technicians.
    8. Protect customer property (PTP). 

    Additional Functions:
    1. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered.
    2. Implement and apply Lean/continuous improvement processes to all areas of responsibility.
    3. Properly use and maintain Company-provided tools and equipment. Return items to designated storage area after use.
    4. Comply with safety rules and procedures. Use protective equipment as required and be alert for unsafe conditions. Address unsafe conditions before putting people or property at risk.
    5. Use the material tracking system to create parts demand, track squawks, and sign-offs, and to charge labor to correct work orders.
    6. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
    7. Perform other duties as assigned. 
     


     

    Education and Experience Requirements:



    • High School Diploma or GED required. 
    • FAA Airframe and Powerplant certificate and 2 years of aviation maintenance experience or 4 years of aviation maintenance experience to include 2 years of experience working on mid/large size aircraft required.
    • Valid Driver’s License required.
    • Strong structural background preferred.


    Unique Skills:



    • A&P and Sheet metal experience desired.


    Other Requirements:
    1. Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures.
     
    Job Number: 1910104113
    Job Location: Brunswick, GA
    Duration: 6 months
    Input Date: 07/02/2019
    Last Updated: 11/18/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Earl Sawyer
    Address: 2154 N CENTER ST STE 405D
    City, State: NORTH CHARLESTON, SC 29406
    800 Phone: 866/224-2745
    Email: southeastjobs@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GSd8QAG&URLSource=cjhunter

    Aviation Mechanics - Clearance

    Description:
    Seeking Experienced Aviation Mechanics for a contract opportunity in San Antonio, Texas!

    Work to be performed on a VIP aircraft, 747 platform and active Top Secret Clearance Required.
    Several Openings For:
    • General Mechanic
    • Electrical
    • Structures
    • Avionics Tech
    • Quality Inspection
    • Supply Chain Specialist


    Great Opportunity for Ex-military/Exiting Military/ and Veterans
    Previous military experience a plus!


     
    Experience performing routine maintenance, modifications, and rework on VIP - 747 aircraft.
    Required- Minimum of 5 years' experience working on 747 platform.
    Tools: no tools required
    Location: San Antonio, Texas

    ***Current Security Top Secret Clearance required
    US Citizenship Required: Clearance requirements will be used during resume screening. Individuals must hold a current Clearance or Equivalent Clearance/ investigation type to be considered for this position, clearance level must be noted on the resume. Must follow submittal procedures below for consideration. No phone calls please, only candidates that provide resumes with the job ID number will be contacted and considered for the opportunity.

    **submittal must reference Job ID number 1710063637

    Camille Zunker- czunker@pdstech.com
     
    Job Number: 1710063637
    Job Location: San Antonio, TX
    Duration: 12 months
    Input Date: 02/27/2017
    Last Updated: 11/18/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Camille Zunker
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002GBZ0AAO&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Avionic Technician - Clearance CA

    Description:
    164441 1657-1 Avionic Technician
    Work Location: Edwards AFB, CA
    Status: Open

    Qty: 2
    Desired Start Date: 7/8/2019
    End Date: 6/5/2020
    • Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company.

    Job Description:
    Candidate must have a minimum of 8 years’ experience in fighter aircraft electrical maintenance
    Knowledgeable of Tool Control, FOD, Supply, HAZMAT, Training, Quality, and Security programs.
    F-22 Electrical/Avionic system experience is preferred
    F-22 Low Observable materials application (Desired not required)
    Services, repairs, and overhauls F-22 aircraft electrical systems to ensure airworthiness. Repairs, replaces, and rebuilds aircraft electrical systems. Incorporate engineering changes. Replaces and repairs worn or damaged components. Adjusts, repairs, and replaces electrical wiring system and aircraft accessories.

    Work typically requires a detailed understanding of the interrelationships of circuits. Perform such tasks as making circuit analyzes, and tracing relationships in signal flow. Use complex test instruments such as high frequency pulse generators, frequency synthesizers, distortion analyzers, and complex computer control equipment. Work may be reviewed by supervisor for general compliance with accepted practices, may provide technical guidance.

    Read and interpret engineering drawings, technical manuals, repair manuals, understanding symbols, flags, and general notes - Identify aircraft locations by station, butt-line, and waterline as shown on engineering documentation and technical orders

    Regularly required to perform repetitive movements, work overhead, use hands to grasp, handle, and/or feel, reach with hands and arms, talk, and hear. The employee is frequently required to stand, walk, stoop, kneel, squat, crawl, and twist.
    Work in a safe and efficient manner while maintaining a clean, FOD-free work area.


    Pay Rate: $31.85 Hourly

    Experience
    Areas of Expertise F-22 No 1
     
    Job Number: JEG -1657-1S
    Job Location: Edwards AFB, CA
    Rate: 31.85/hr max
    Duration: 12 months
    Input Date: 09/23/2019
    Last Updated: 10/01/2019
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Avionic Technician / aircraft modification experience required / wire harness installation - no clearance SC

    Description:
    165856
    Avionic Technician
    Greenville,SC 29605
    • Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company.

    Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, engineering drawings and written or verbal instructions. Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions. Installs wire harnesses in aircraft to include routing and termination.


    Qty 3 openings
    Candidate must have previous aircraft modification experience. Installs wire harnesses in aircraft to include routing and termination.
     
    Job Number: JEG -1895-1
    Job Location: Greenville, SC
    Rate: 29/hr max
    Duration: 12 months
    Input Date: 09/26/2019
    Last Updated: 10/29/2019
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    Avionics & Electrical Design Engineers

    Description:
    SolidWorks aircraft electrical and avionics upgrades

    Immediate needs - email a resume and call our national recruiters
     
    Job Location: Nationwide
    Input Date: 06/12/2018
    Firm Name: ADDITIONAL CONTRACT SERVICES
    Address: 85 RANGEWAY RD BLDG 1 STE 2
    City, State: NORTH BILLERICA, MA 01862
    800 Phone: 800/661-8272
    Email: acs@acsnatl.com
    Website: www.acsnatl.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Avionics System Safety Engineer

    Description:
    We are currently seeking an Aviation Safety expert to fill an opening for a company in Nagoya, Japan. Interested candidates should have previous aircraft or aviation experience as well as 8 plus years of hands on system safety work.

    Responsibilities of the Avionic System Safety Engineer

    Creation and integration of SFHA/SSA/CMA Avionics Systems.
    Technical coordination with aviation authorities including FAA, JCAB and EASA.
    Technical scheduling and coordination with suppliers and internal departments.
    Other activities related to Safety Assessments.



    Requirements of the

    4 year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation).
    8 plus years of experience in Avionics System Safety.
    Must have excellent written and verbal communication skills in English.
    Previous aircraft or aviation experience.
     
    Job Location: Japan
    Duration: 2 Years
    Start Date: ASAP
    Input Date: 09/06/2019
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Susan McGlinsey
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Avionics Systems Engineer

    Description:
    • As Senior Avionics Engineer you will report directly to the Avionics Integrated Product Team (IPT) Lead. Candidates shall have in-depth technical knowledge of one or more of the following avionic systems: FMS, Navigation, Displays, EFVS, Communications, Antennae, Radar, Data acquisition, Safety systems, Health monitoring & reporting and Integrated Modular Avionics.

    On any given day you might:
    • Integrate Avionic Systems
    • Establish requirements
    • Be responsible for system design and architecture
    • Interact directly with suppliers
    • Provide technical leadership, mentoring and guidance
    • Define traceability to the FARs
    • Be responsible for validation and verification of requirements
    • Be responsible for system test and certification
    • Report Status
    • Manage and track mass properties of Avionic Systems during the complete design cycle
    • Provide expert level guidance on both practical and theoretical aspects of the Avionic Systems design
    • Provide support for engineering, certification, and flight test departments from concept to product certification
    • Foster a culture that inspires high levels of performance and employee retention

    We're looking for someone who has:
    • Bachelor’s degree in relevant field
    • 5+ years of experience within the Avionics discipline
    • Experience working on aircraft development programs
    • Experience with Avionic Systems design and integration
    • Demonstrated success developing processes
    • Good understanding of Systems Engineering
    • Familiarity with Part 25, ARP 4754A, DO-160, DO-178 and DO-254 is preferred.
    • A strong familiarity with Honeywell Primus EPIC avionics system is a plus but certainly not required.
     
    Job Number: 42-033
    Job Location: Reno, NV
    Rate: DOE, but very competitive
    Per Diem: Yes
    Overtime: Yes
    Duration: 1+ years
    Start Date: ASAP
    Input Date: 08/23/2019
    Last Updated: 09/16/2019
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Avionics Technician / Avionics modification experience / URGENT URGENT SC

    Description:
    166011 Job Title: Avionics Technician

    Work Site Address: Greenville, SC 29605
    Job Number: 1968-1
    Max Pay Rate: $29.00/hr
    Start Date: 9/2/2019
    End Date: 12/19/2019
    Position Type: Contract
    • Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company.

    The hiring manager is needing to fill these positions A.S.A.P. and is willing to consider candidates without P-3 experience as long as they have at least 3-4 years AVI experience.

    Job Summary:
    Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, engineering drawings and written or verbal instructions. Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions.

    Qty 3 positions needed
    The hiring manager is looking for Avionics Techs with modification experience. P-3 aircraft is desired but not an absolute requirement. Modification experience is more important.

    Areas of Expertise P-3 No 3 4 - 6 Years
    Technical Skills Electrical Testing No 2 4 - 6 Years
    Technical Skills Read Electrical Schematics No 1 4 - 6 Years
     
    Job Number: JEG -1968-1
    Job Location: Greenville, SC
    Rate: 29/hr max
    Duration: 3 -18 months
    Input Date: 09/30/2019
    Last Updated: 10/29/2019
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Avionics Technicians (Special Term)

    Description:
    STS Technical Services is hiring Avionics Technicians in San Antonio, Texas.

    Qualifications:
    5 years of troubleshooting experience and avionics systems knowledge on any of the following aircraft platforms, Boeing 757s, 767s, 787s, MD-11s
    Must have completed avionics modification work in the last 1 year
    A&P License is a plus, but not required
    About STS Technical Services:
    STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

    Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

    If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

    STS Technical Services is an equal opportunity employer.
     
    Job Number: 45155
    Job Location: San Antonio, TX
    Input Date: 08/28/2019
    Firm Name: STS AEROSTAFF SERVICES
    Attention: STS Technical Services
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 877/707-5767
    Fax Phone: 877/707-5767
    Website: www.stsaviationgroup.com

    Avionics/Elec Tech II

    Description:
    PDS Tech is seeking a Avionics/Electrical Tech II for an open position in Savannah, GA.

    Provides technical expertise in testing aircraft systems, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. May fill in for the Senior Avionics/Electrical Technician thus ensuring that the company goals of safety and quality are enforced at all times while adhering to daily work plans to maintain schedule requirements. 

    Principal Duties and Responsibilities:

    Essential Functions:

    • Demonstrates technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting.
    • Performs the installation and functionally testing of electrical/avionics components and systems on aircraft per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
    • Ensures quality and efficiency of all installations: troubleshoots processes/concepts to provide timely, quality repairs of malfunctioning systems.
    • Demonstrates the skills and knowledge required to effectively and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring.
    • Performs and complies with engineering changes and modifications as required.
    • Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability.
    • Ensures that all work performed on the aircraft is properly and completely documented and ready for inspection.
    • Tests and maintains test equipment, electronic systems, and components.
    • Complies with the company FOD program, tool control program, 5-S program and all safety regulations.
    • Adapt to sudden schedule changes. 

    Additional Functions:

    • In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
    • Performs other duties as assigned. 


     


     

    Education and Experience Requirements:



    • High School graduate/GED.
    • A & P license, FCC license or NCATT certification preferred.
    • Four (4) years experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and two (2) years related experience.

    Other Requirements:

    • Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs.
    • Ability to read and interpret basic blueprints and schematic diagrams.
    • Demonstrates excellent communication skills. Must be able to communicate effectively both verbally and written.
    • Must be able to climb stairs and ladders, work in confined areas and lift up to 50 pounds.



     

      


     


     
    Job Number: 1910102788
    Job Location: Savannah, GA
    Duration: 6 months
    Input Date: 07/04/2019
    Last Updated: 11/18/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Rodney Kinlaw
    Address: 900 CIRCLE 75 PKWY SE STE 600
    City, State: ATLANTA, GA 30339
    800 Phone: 866/224-2745
    Email: southeastjobs@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033jFeQAI&URLSource=cjhunter

    Avionics/Electrical Tech Sr

    Description:

    PDS is seeking an Avionics/Electrical Tech Sr. for an open position in Savannah, GA



    Position Purpose:
    Provides leadership, technical expertise and guidance while performing various operational, functional tests and repairs of avionics/electronic, aircraft equipment and systems to ensure a defect free aircraft. Provides superior technical expertise in testing, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise and leadership by defining and implementing process changes to reduce cost and meet schedule without compromising Safety or Quality. Demonstrates the knowledge and leadership skills required to fill in for the team leader thus ensuring that the company goals of Safety and Quality are enforced all times while adhering to daily work plans to maintain schedule requirements. 

    Principal Duties and Responsibilities:



    •  Demonstrates superior technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting. Provides direct training to personnel to support company cross-training goals while ensuring a safety conscience, quality oriented, skilled workforce.
    • Teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
    • Ensures quality and efficiency of all installations: troubleshoots and teaches troubleshooting processes/concepts to provide timely, quality repairs of malfunctioning systems.
    • Demonstrates the skills and knowledge required to effective and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring.
    • Oversees the performance and compliance with engineering changes and modifications as required.
    • Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability.
    • Demonstrates through diligent compliance the importance of daily logs and other paperwork. Ensures that all work performed on the aircraft is properly and completely documented
    • As required, pre-inspects work of others prior to submitting to inspection for approval to reduce rework and inspection time.
    • Provides the knowledge and technical expertise in testing and maintaining test equipment and electronic systems and components as required.
    • Enforces the company FOD program, tool control program, 5-S program and all safety regulations.
    • Maintains required logs and records.
    • Adapts to sudden schedule changes.
    • Coordinates with other disciplines concerning projects. 



    Additional Functions:



    • Where required, teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
    • Self inspection capability for all avionics testing functions in applicable areas.
    • In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
       


     


    Education and Experience Requirements:
    High School Diploma or GED required. Six (6) years experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and four (4) years related experience. A&P (FAA Airframe and Powerplant) license preferred. Other FCC License preferred. Other NCATT preferred. 


    Other Requirements:

    • Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs.
    • APU run qualification and engine run qualification preferred.
    • Ability to read and interpret basic blueprints and schematic diagrams.

     

    Unique Skills:



    G650 experience preferred.



     


     

     
    Job Number: 1910101665
    Job Location: Savannah, GA
    Duration: 6 months
    Input Date: 04/30/2019
    Last Updated: 11/18/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Donnell Covington
    Address: 900 CIRCLE 75 PKWY SE STE 600
    City, State: ATLANTA, GA 30339
    800 Phone: 866/224-2745
    Email: southeastjobs@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033fd0QAA&URLSource=cjhunter

    C++ Real Time Software Engineers

    Description:
    Software Engineers
    Positions can be located at multiple sites:
    Oklahoma City, OK 73145 / 73150 / 73135
    El Segundo, CA 90245

    Secret, TOP Secret AND non-cleared positions, at various skill levels

    Tasks may include:
    • Lead, Develop and Maintain Code and integrate software components into a fully functional software system.
    • Develop, document, and maintain architectures, requirements, algorithms, interfaces and designs for software systems.
    • Requirements analysis, design, development, test, documentation, licensing, troubleshooting, and user support; custom operating system development; tool design and maintenance; research and development projects; trade studies; risk assessments; and support to software testing.
    • Execution of systems and software testing to verify operational and functional requirements. Assists with test procedures and documenting test results to ensure software system requirements are met.
    • Support software project management and software supplier management functions.
    • Select, tailor and deploy processes and tools; establish metrics.
    • Design, develop, implement, test and document software for surveillance aircraft platforms that enable air superiority by detecting, identifying, and tracking airborne threats and providing operators intuitive battle management controls.
    • Serve as a subject matter expert for software domains, system-specific issues, processes and regulations.
    • Positions include Leads as well as team members in the avionics software organization working closely with other software engineers, systems engineers, other disciplines, customers, suppliers and field service representatives.

     Bachelor's degree in an engineering classification.
     
    Experience with any of the following:
    • C, C++, C#, Java, ADA, DXL, Chef, Puppet, Ansible
    • Java Script, Python, shell, Perl Scripting languages
    • Rhapsody, Rational, TFS, ClearCase, ClearQuest, Team Concert, Jenkins, Coverity, Eclipse
    • Real Time, Embedded, ROTS, Doors, Agile
    • Unix, Linux Windows
       

    Contact Elisabeth Laspe at 314-482-3991 or elaspe@pdstech.com to discuss these opportunities.
     
    Job Number: 1810088612
    Job Location: Lexington Park, MD
    Duration: 12 months
    Input Date: 09/11/2018
    Last Updated: 11/18/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Elisabeth Laspe
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mcb7AAA&URLSource=cjhunter

    C++ Real Time Software Engineers

    Description:
    Software Engineers
    Positions can be located at multiple sites:
    Oklahoma City, OK 73145 / 73150 / 73135
    El Segundo, CA 90245

    Secret, TOP Secret AND non-cleared positions, at various skill levels

    Tasks may include:
    • Lead, Develop and Maintain Code and integrate software components into a fully functional software system.
    • Develop, document, and maintain architectures, requirements, algorithms, interfaces and designs for software systems.
    • Requirements analysis, design, development, test, documentation, licensing, troubleshooting, and user support; custom operating system development; tool design and maintenance; research and development projects; trade studies; risk assessments; and support to software testing.
    • Execution of systems and software testing to verify operational and functional requirements. Assists with test procedures and documenting test results to ensure software system requirements are met.
    • Support software project management and software supplier management functions.
    • Select, tailor and deploy processes and tools; establish metrics.
    • Design, develop, implement, test and document software for surveillance aircraft platforms that enable air superiority by detecting, identifying, and tracking airborne threats and providing operators intuitive battle management controls.
    • Serve as a subject matter expert for software domains, system-specific issues, processes and regulations.
    • Positions include Leads as well as team members in the avionics software organization working closely with other software engineers, systems engineers, other disciplines, customers, suppliers and field service representatives.

     Bachelor's degree in an engineering classification.
     
    Experience with any of the following:
    • C, C++, C#, Java, ADA, DXL, Chef, Puppet, Ansible
    • Java Script, Python, shell, Perl Scripting languages
    • Rhapsody, Rational, TFS, ClearCase, ClearQuest, Team Concert, Jenkins, Coverity, Eclipse
    • Real Time, Embedded, ROTS, Doors, Agile
    • Unix, Linux Windows
       

    Contact Elisabeth Laspe at 314-482-3991 or elaspe@pdstech.com to discuss these opportunities.
     
    Job Number: 1810088609
    Job Location: Palmdale, CA
    Duration: 12 months
    Input Date: 07/18/2018
    Last Updated: 11/18/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Elisabeth Laspe
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mcanAAA&URLSource=cjhunter

    CNC Machine Operator - CA

    Description:
    Chipton Ross is seeking a CNC machine Operator for an opening in Santa Maria, CA

    Responsibilities
    Operates computer numerical controlled (CNC) machines such as: milling machines, lathes, turning centers and horizontal mills used for the construction of aircraft interior structural and non structural parts. Aircraft interior parts are cut based on engineering drawings and include floor fittings, aluminum trims, counter tops and other various aluminum, stainless steel and phenolic parts
    " Supervises and leads the operation of CNC machines in coordination with the production schedule and at the direction of the CNC Manager.
    " Adheres to company and customer specifications, work instructions, engineering prints and work orders.
    " Documents the materials and processes used in the process to maintain traceability of product.
    " Loads programs into CNC machine and executes program cutting of the material.
    " Cuts raw stock according to the necessary size for the part being machined.
    " Secures and fixtures raw stock of material into machine, squares material prior to running program if necessary, and monitors the operating of the machine to ensure proper program performance.
    " Deburs completed machine parts as time allows.
    " Provides feedback to supervisor and programmer as to the performance of the program and tooling used for cutting the material.
    " Verifies the accuracy of the parts using calipers, micrometers and other metrology equipment as a periphery inspection.
    " Ensures machine and area around machine is kept as clean as practical.
    " Operates CNC machine in a safe manner.
    " Properly maintains coolant, including removal of containments, proper dilution ratio and cleaning.

    Requirements
    High school diploma or GED required
    3-5 years of experience
    Familiarity of the basic operation of CNC machine and the understanding of G and M code is preferred or the ability to learn is mandatory.
    Other Skills: Ability to read engineering blue prints is desirable.

    Preferred
    Degree or diploma from technical/vocational school in CNC machining is strongly desired and most preferred.

    Work Schedule
    2nd Shift, M-F 4pm - 12:30am

     
    Job Number: 175942
    Job Location: Santa Maria, CA
    Rate: Up to $19.00 DOE
    Duration: Temp to Hire
    Input Date: 12/19/2018
    Last Updated: 11/18/2019
    Firm Name: CHIPTON ROSS
    Attention: Emmanuel Morgan
    Address: 420 CULVER BLVD
    City, State: PLAYA DEL REY, CA 90293
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: emorgan@chiptonross.com
    Website: www.chiptonross.com

    Cabinetmaker II

    Description:
    PDS Tech is seeking an Cabinetmaker II  for an open position in Savannah, GA. 

    Under general supervision, fabricates aircraft furniture and other wood-surfaced subassemblies using aircraft specifications, design and engineering drawings with a high level of safety, quality, detail and productivity. Assists team members with greater experience to enhance techniques supportive of quality workmanship. 

    Principal Duties and Responsibilities: 

    Essential Functions: 1. Works under general supervision to fabricate furniture and other wood-surfaced subassemblies using blueprints, aircraft specifications and design/engineering drawings. 2. Assembles, pins and glues cabinet shells. Installs drawer-slides, hinges, latches and other hardware in subassemblies. Applies exterior surface materials such as laminates, veneers, and cap strips. 3. Uses various types of stationary and hand-held power tools to fabricate or disassemble furniture. 4. Complies with all safety, 5S, and housekeeping policies. Uses personal protective equipment to protect aircraft interior. 5. Uses the material tracking system to create parts demand, track squawks and to sign-off work. 

    Additional Functions: 1. Works with lead and higher skilled technicians to develop and implement process improvements that increase safety, reduce, cost, cycle time, and man-hours using Lean Six-Sigma and other process improvement techniques. 2. Performs other duties as required. 

    Other Requirements: 1. The ability to read write, speak, and understand the English language. 2. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. 3. Must be computer literate.
     

    Unique Skills:



    Must be able to work any shift and overtime as required.




    Education and Experience Requirements: 

    High school diploma/GED. Basic knowledge of cabinetmaking processes, products and tools. Two (2) years experience in cabinetmaking. Experience in aerospace industry preferred. Possess a working knowledge of inspection and process specifications preferred.




     


     
    Job Number: 1910105579
    Job Location: Savannah, GA
    Duration: 6 months
    Input Date: 08/14/2019
    Last Updated: 11/18/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Donnell Covington
    Address: 900 CIRCLE 75 PKWY SE STE 600
    City, State: ATLANTA, GA 30339
    800 Phone: 866/224-2745
    Email: southeastjobs@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GX5IQAW&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Catia - Structural Design Engineers - NEEDED-

    Description:
    -Design Engineer will take responsibility for executing complex aircraft primary structural designs.
    -Utilizing Catia 3D CAD software with an emphasis on modeling and drafting, 3D model development in support of detail, assembly and installation layouts.
    -Experience with Airframe and or primary aircraft structures _ - -kinematics experience desired.
    -Bachelors in Engineering required
     
    Job Number: 87435
    Job Location: Mid-West
    Rate: 70/80-hr W2
    Per Diem: yes
    Overtime: Expected
    Duration: 12 month assignment
    Start Date: 4/6 weeks
    Input Date: 08/27/2019
    Last Updated: 10/08/2019
    Firm Name: ADVANCED TECHNOLOGY
    Attention: Domenic Avellino
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Website: www.advancedtechno.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Class A Fuel Technicians

    Description:
    Tank Tigers, an STS Aviation Group Company, is now hiring Class A Fuel Technicians in Jamaica, New York.

    Fuel Technician Responsibilities:
    Trouble shoot and repair of multiple airframes and types.
    Carry out the assigned tasks, in accordance with the applicable maintenance manual.
    Maintenance performed which have been completed or partially completed have been signed off.
    Ensure maintenance operations are performed in the appropriate sequence that inspections are requested in an orderly and timely manner and that maintenance activities are performed according to the appropriate maintenance data and customer requirements.
    Ensure test equipment or tools used to make airworthiness determinations are calibrated, labeled and current.
    Request stock as required for the work being performed.
    Properly record the work performed on the appropriate maintenance record and complete the additional paperwork as required.
    Maintain work area in a clean and orderly manner.
    Remain cognizant of applicable FAR part 145 and 43.
    Familiar with the content of the company Repair Station Manual, Quality Control Manual and subsequent revisions.
    Responsible for recording time of tasks assigned.
    Immediately communicating to supervision any procedures, practices or habits, if not corrected might lead to injury, inefficiency or un-airworthy conditions.
    The work demands flexible schedule and the ability to fit into small areas and work in confined spaces.
    Qualifications:
    This technical position requires a minimum of 4 calendar years of aircraft maintenance experience
    Must be able to trouble shoot and repair a vast majority of tasks with limited guidance on multiple airframes.
    Reports to the Facility Supervisor and/or Facility Manager.
    The qualifications for this position is knowledge, experience and/or training required to perform assigned tasks.
    This position will not be assigned management, supervisory or inspection duties and does not have authorization to sign a maintenance release for approving, maintained or altered article for return to service. Therefore, this position is not required to be certified under 14 CFR – part 65 or be listed on the Management, Supervisor, or Inspector roster.
    What We Offer:
    Tank Tigers, an STS Aviation Group Company, is the newest brand under the STS Aviation Group umbrella. Our company focuses on delivering complete aircraft fuel system services to clients all over with world.

    If you would like to speak with a Recruitment Professional directly to learn more about benefits, job specifics, our company, etc…, please call 1-800-359-4787. STS’ career placement services are always free, and we are open seven days a week. Reach out at any time!

    Thanks so much for your interest in working with Tank Tigers, an STS Aviation Group company, and we look forward to hearing from you soon.
     
    Job Number: 48593/48596
    Job Location: Jamaica, NY
    Input Date: 08/28/2019
    Firm Name: STS AEROSTAFF SERVICES
    Attention: STS Technical Services
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 877/707-5767
    Fax Phone: 877/707-5767
    Website: www.stsaviationgroup.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Clearance Job Opportunities

    Description:
    In addition to hundreds of commercial and business aircraft contract employment opportunities, a growing number of our clients' openings are requiring active Secret or Top Secret clearance.

    If you are currently available, seeking employment and want to utilize/maintain your clearance, please connect ASAP!

    Systems Engineering
    Structural Engineering
    Electrical Engineering
    Manufacturing Engineering
    Software Engineering
    Software Test
    AND More...
     
    Rate: $50-100/+ per hour
    Per Diem: Split often available
    Overtime: Possible
    Duration: 6mo - 3 yrs
    Start Date: ASAP
    Input Date: 09/04/2019
    Firm Name: CHIPTON ROSS
    Attention: Terry Jones
    Address: 420 CULVER BLVD
    City, State: PLAYA DEL REY, CA 90293
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Website: www.chiptonross.com

    Combat AirCraft Training Spec 5

    Description:
    PDS Tech Inc is seeking a Combat Aircraft Training Tech Specialist for an open position in Saint Louis, MO.

    Summary:
    • Weapon System Officer Subject Matter Experts to develop a Training Needs Analysis for the F/A-18EF H-14 Software update and must have H-12 Software experience. Works under consultative direction.


     

     
    Job Number: 1910105893
    Job Location: Saint Louis, MO
    Duration: 4 months
    Input Date: 08/23/2019
    Last Updated: 11/18/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Mary Ann McCarthy
    Address: 1215 FERN RIDGE PKWY STE 231
    City, State: ST LOUIS, MO 63141
    Phone: 314/628-9143
    800 Phone: 800/472-3737
    Fax Phone: 314/628-9485
    Email: cecjstlouis@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GYVqQAO&URLSource=cjhunter

    Combat AirCraft Training Spec 5 - G

    Description:
    PDS Tech Inc is seeking a Combat Aircraft Training Tech Specialist for an open position in Saint Louis, MO.

    Summary:
    • Weapon System Officer Subject Matter Experts to develop a Training Needs Analysis for the F/A-18EF H-14 Software update and must have H-12 Software experience. Works under consultative direction.


     

     
    Job Number: 1910105894
    Job Location: Saint Louis, MO
    Duration: 4 months
    Input Date: 08/23/2019
    Last Updated: 11/18/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Mary Ann McCarthy
    Address: 1215 FERN RIDGE PKWY STE 231
    City, State: ST LOUIS, MO 63141
    Phone: 314/628-9143
    800 Phone: 800/472-3737
    Fax Phone: 314/628-9485
    Email: cecjstlouis@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GYVvQAO&URLSource=cjhunter

    Combat AirCrft Trng Spec 5 -

    Description:
    PDS Tech Inc is seeking a Combat Aircraft Training Tech Specialist for an open position in Saint Louis, MO.

    Summary:
    • Weapon System Officer Subject Matter Experts to develop a Training Needs Analysis for the F/A-18EF H-14 Software update and must have H-12 Software experience. Works under consultative direction.


     
    Education/experience typically acquired through advanced education (e.g. Bachelor) and typically 15 or more years' related work experience or an equivalent combination of education and experience (e.g. Master+13 years' related work experience, 19 years' related work experience, etc.).
     
    Job Number: 1910105892
    Job Location: Saint Louis, MO
    Duration: 4 months
    Input Date: 08/19/2019
    Last Updated: 11/18/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Mary Ann McCarthy
    Address: 1215 FERN RIDGE PKWY STE 231
    City, State: ST LOUIS, MO 63141
    Phone: 314/628-9143
    800 Phone: 800/472-3737
    Fax Phone: 314/628-9485
    Email: cecjstlouis@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GYVlQAO&URLSource=cjhunter

    Combat Aircraft Training Specialist - Secret

    Description:
    PDS Tech Inc is seeking a Combat Aircraft Training Tech Specialist for an open position in Saint Louis, MO.

    Summary:
    • Weapon System Officer Subject Matter Experts to develop a Training Needs Analysis for the F/A-18EF H-14 Software update and must have H-12 Software experience. Works under consultative direction.


     

     
    Job Number: 1910105895
    Job Location: Saint Louis, MO
    Duration: 4 months
    Input Date: 08/23/2019
    Last Updated: 11/18/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Mary Ann McCarthy
    Address: 1215 FERN RIDGE PKWY STE 231
    City, State: ST LOUIS, MO 63141
    Phone: 314/628-9143
    800 Phone: 800/472-3737
    Fax Phone: 314/628-9485
    Email: cecjstlouis@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GYW0QAO&URLSource=cjhunter

    Combat Aircraft Training Specialist 5

    Description:
    Chipton-Ross is seeking a Combat Aircraft Training Specialist 5 for an openings in Saint Louis, MO.

    RESPONSIBILITIES:
    EA-18G highly experience Pilot Subject Matter Expert to develop a Training Needs Analysis for the F/A-18EF H-14 Software update and must have H-12 Software experience. Works under consultative direction.

    EDUCATION:
    Accredited Education/experience typically acquired through advanced education (e.g. Bachelor) and typically 15 or more years' related work experience or an equivalent combination of education and experience (e.g. Master+13 years' related work experience, 19 years' related work experience, etc.).

    FULL TIME/FIRST SHIFT
    WORK HOURS: 8:00 AM - 5:00 PM

    MISCELLANEOUS:
    Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
     
    Job Number: 181309
    Job Location: Saint Louis, MO
    Rate: $DOE
    Duration: 4 Months
    Input Date: 08/27/2019
    Last Updated: 11/18/2019
    Firm Name: CHIPTON ROSS
    Attention: Daniel McGowan
    Address: 420 CULVER BLVD
    City, State: PLAYA DEL REY, CA 90293
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: dmcgowan@chiptonross.com
    Website: www.chiptonross.com

    Composite Structural Design Engineer Openings

    Description:
    Design and configuration of composite primary aircraft structure.
    Experience during preliminary/conceptual design phase required.
    Support of subsystems integration and packaging into primary structure.
    Strong knowledge and understanding of latest structural design, as well as manufacturing trends in the Aerospace industry.
    Analyze the applicability of new and emerging technologies and advanced techniques.
    Serve as a design focal between the program and Tier 1 suppliers.
    Provide technical support in design and development of the preliminary structures layout that meets weight, cost, manufacture-ability and certification requirements.
    Support new business development, trade studies and proposal activities.
    Support technical review of supplier capabilities and progress.

    Requirements:
    Must be a US or Canadian citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772.
    Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure / confidentiality agreement with current or any former employer that would prevent you from fully performing the duties of the position.
    Must have a bachelor’s degree in Aerospace or Mechanical Engineering, or similarly related area.
    8+ years of experience in performing design of large aerospace structures.
    Strong composite structural design background.
    Proficiency with CATIA V5 and Teamcenter PLM is preferred.
    Knowledge of the conceptual and preliminary design phases of aircraft development is strongly preferred.
    Thorough understanding of the structural design requirements for Part 25 certification is preferred.
    Highly self-motivated with a strong bias for action, and excellent problem-solving skills across multi-disciplinary skill sets.

    The Structures Company, LLC is an AA/EOE.
     
    Job Location: Reno, NV
    Rate: Open
    Per Diem: Yes
    Overtime: Possible
    Duration: Long-term
    Start Date: ASAP
    Input Date: 11/12/2019
    Last Updated: 11/18/2019
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Chris Sheets
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Email: chrissheets@thestructurescompany.com
    Website: www.thestructurescompany.com

    Composite Technician (20+ openings)

    Description:
    Job Description
    Come work for a great company with great benefits! We need guys for all shifts (weekends, nights, days, holidays). Six to eight-month contract with the potential of converting to a permanent employee. Aerospace experience preferred.
    Composites fabrication & sub-assembly:
    • Fabrication of parts using wet layup and pre-impregnated composite materials
    • Knowledge of properly preparing tooling for layup (Clean, seal, release)
    • Placement and consolidation of composite materials in tooling
    • Grinding, cutting, and trimming of parts
    • Working knowledge of composite specific equipment including ovens, Gerber cutting machines, and Virtek laser computers.
    • Bonding composite structures
    • Hand-finishing parts to proper fitment
    • Wet layup with multiple resin systems and fabrics
    • Locating parts and creating fixtures to blueprints and / or engineering instructions
    • Attention to detail and ability to self-inspect work to ensure quality defects are mitigated
    Required:
    • 3+ years of experience with composites or aircraft fabrication and assembly preferred.
    • Flexible to work overtime/modified/Non-standard shifts preferred
    • 5S/FOD/Tool control programs mandatory
    • Ability to perform repairs on composite structures
    • Experienced with quality inspection points and process documentation.
    • Knowledge of resins, mixing, ratios, and paste mixes.
    Physical Requirements
    • Must be able to stand for extended periods – 8 hours min.
    • Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces.
    • Physically able to handle items weighing up to 40lbs (unassisted).
    • Working in confined spaces
    • Working on Elevated Platforms
    Job Type: Full-time
    Salary: $16.00 to $45.00 /hour
     
    Job Location: Mojave, CA
    Rate: 16-40/hr
    Per Diem: Yes
    Overtime: Possible
    Start Date: ASAP
    Input Date: 10/29/2019
    Last Updated: 11/18/2019
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Tara Gilbert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Email: tara.gilbert@thestructurescompany.com
    Website: www.thestructurescompany.com

    Cost Estimator

    Description:

    PDS Tech, Inc. is seeking a Senior Cost Estimator in St. Louis, MO. 

    Job Summary


    This position is to prepare labor and material estimates, evaluate technical requirements and support the engineering group with analysis of product cost and parametric modeling.

    Job Responsibilities 

    • Analyze specifications, statements of work, and other documentation to prepare time, cost, and labor estimates
    • Demonstrated knowledge in BOM part production manufacturing methods, build cycle times, and various 'make-from' material types.
    • Sound reasoning and mathematical skills including an understanding of labor learning curve impact calculations.
    • Collect and review data and develop estimating techniques, including parametric estimating models, for use in preparation of estimates


    • Prepare analysis and verification of product costs in support of special projects from the engineering group
    • Coordinate with internal and external customers to clearly define program criteria to satisfy requests for pricing requirements.


    Please send resumes to Gus Sanchez at: gsanchez@pdstech.com or call 314-264-3135 to discuss. 


    Required Qualifications:
    • Must have an Active DoD Secret Clearance
    • Excellent computer skills (EXCEL, PowerPoint, & Word).
    • Associates degree in Engineering, Technology, Aviation Management - OR - in lieu of degree, 2 years of aerospace manufacturing experience
    • 2 years of experience in estimating techniques or labor time standard development
    • Must be a US Citizen. Must comply with ITAR regulations and site SSA requirements.

    Preferred Qualifications 

    • Experience with electronic modeling software such as NX(UG) and CATIA – to review models for development of fabrication cost estimates
    • Experience with blue print reading, model-based definition, GD&T and related aspects of aerospace design criteria
    • Understanding of contractual agreements (FAR, TINA).
    • Strong analytical and planning skills
    • Excellent computer skills (MS Office Suite).
    • Experience in engineering, manufacturing, fabrication processes and major assembly aerospace/aircraft structures and systems, and airframe manufacturer’s business, policies and practices.
    • Excellent written and verbal communication and collaboration skills

    Please send resumes to Gus Sanchez at: gsanchez@pdstech.com or call 314-264-3135 to discuss
     
    Job Number: 1910105335
    Job Location: Hazelwood, MO
    Per Diem: Yes
    Duration: 6 months
    Input Date: 08/09/2019
    Last Updated: 11/18/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Gus Sanchez
    Address: 11828 W CENTRAL STE 100
    City, State: WICHITA, KS 67212-5129
    Phone: 316/729-1800
    800 Phone: 800/333-8644
    Fax Phone: 316/729-1857
    Email: cecjwichita@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GWPYQA4&URLSource=cjhunter

    Delegated Organization Process Specialist

    Description:
    We are seeking an experienced aircraft certification professional to fill a position for a company in Nagoya, Japan. Interested candidates should have significant experience with process development and/or improvement as well as knowledge of global aircraft certification requirements and compliance standards.

    Responsibilities of the Delegated Organization Process Specialist
    Engage in continuous improvement of the ADO manual and associated compliance processes in alignment with JCAB regulations and guidance.
    Propose and execute on process improvement opportunities.
    Work closely with certification management, regulatory affairs, quality assurance, design engineering and JCAB.
    Educate impacted parties on system changes and upgrades.
    Support changes to JCAB requirements to facilitate all system improvements.


    Requirements of the Delegated Organization Process Specialist

    10 plus years of experience working in aircraft certification-related fields, preferably in a delegated organization.
    Significant experience with process development/improvement
    Strong knowledge of global certification requirements and compliance standards.
    Experience interfacing with regulators to support certification activities.
    Fluent in English, with Japanese language capabilities a bonus.
    Previous experience in as an aviation authority employee or delegate is beneficial.
     
    Job Location: Japan
    Start Date: ASAP
    Input Date: 11/14/2019
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Susan McGlinsey
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Email: smcglinsey@velocity-cs.com
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Design Checker

    Description:
    Check 2D and 3D engineering data and 3D models for conformance to requirements as directed. Check parts for fit, form and function to the extent that information is available. Must have experience in Product Lifecycle Management (PLM) processes and tools, including checking CATIA v5, SmarTeam, as well as other CAD datasets, in accordance to Gulfstream requirements as directed.

    Checkers are responsible for determining the acceptability of data in the following areas:
    • Accuracy and completeness of engineering product definition data, including CAD and PDM data.
    • Proper application and compliance with all Engineering and customer drawing requirements.
    • Use and understanding of GD & T a must.
    • Dimensioning and tolerancing including familiarity with ASME Y14.5.
    • Application of best drafting and design practices and procedures.
    • Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
    • Advise Design personnel regarding GAC drawing and design practices and procedures.
    • Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
    • Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
    • Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
     
    Job Number: 24-319
    Job Location: Savannah, GA
    Rate: $53/hr
    Per Diem: Yes
    Overtime: Yes
    Duration: 1 Year plus
    Start Date: ASAP
    Input Date: 08/23/2019
    Last Updated: 09/16/2019
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    Design Engineer ( Clearfield, Utah ) S9271212

    Description:
    Design Engineer ( Clearfield, Utah ) S9271212
    12 month Contract

    Pay Rate:$70-80/hr W2

    Active Secret Clearance Required

    Composite Structural Design Engineer experienced in designing composite structures and assemblies for military and/or commercial aircraft with assembly level design including establishment of data schemes and tolerance analysis.

    Experience is design of laminates, sandwich structures, and bonded and bolted assemblies

    Top three skills:
    Must have an active clearance with an investigation within the last 4.5 years
    BS in Engineering with a minimum of 10 years related experience in design engineering function
    Minimum of 6 years of experience with Siemens NX or Catia V5 for component and assembly design
     
    Job Number: S9271212
    Job Location: Clearfield, UT
    Rate: Open
    Per Diem: no
    Overtime: yes
    Duration: 12 months
    Start Date: ASAP
    Input Date: 11/15/2019
    Last Updated: 11/15/2019
    Firm Name: TALENTPRO CONSULTING
    Attention: Tim
    Address: 402 N B ST
    City, State: FAIRFIELD, IA 52556
    Phone: 641/209-3000 X201
    Fax Phone: 641/209-3001
    Email: timmahaney@talentproconsulting.com
    Website: www.talentproconsulting.com

    Aircraft Interiors Design Engineer

    Description:
    POSITION SUMMARY:
    Provides all levels of engineering drawings related to interior cabin furnishing and components in support of VIP aircraft completions. Mentors other engineers on department techniques and processes. Must have aircraft interiors completions experience and experience designing monuments, galleys, credenzas, closets, beds, tables, etc.



    ESSENTIAL JOB FUNCTIONS:
    1. Develops advanced level design data packages for interior cabin furnishing in support of VIP aircraft completions.
    2. Utilizes airworthiness requirements and the project specification to create drawings.
    3. Creates and reviews engineering drawings, specifications, service bulletins, reports, etc.
    4. Performs research and design relating to the production of engineering drawings necessary for installation and completion of custom aircraft interiors.
    5. Prepares advanced level interior cabin furnishings reports, Engineering Authorizations (EA’s), drawings, and EO’s.
    6. Develops advanced level interior cabin furnishings modifications and installation work instructions, procedures and recommendations.
    7. Mentor and train less experienced engineers within department to increase overall efficiency of department.
    8. Identifies discrepancies and/or problems with drawings before releasing to production and implements correction action to ensure the timely release.
    9. Provides advanced level technical support and engineering disposition in order to resolve aircraft engineering/interior cabin furnishing problems.
    10. Using company procedures, applies engineering knowledge to resolve complex issues.
    11. Maintains advanced level awareness of FAA regulations and required compliance of FARs, ADs, SBs.
    12. Actively works to improve daily processes, and ensures all work meets completion aircraft requirements.
    13. Performs other duties as assigned.


    MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
    1. Bachelor’s Degree in Mechanical or Structural Aerospace Engineering or comparable.
    2. 2-5 years’ experience in Furnishings, Design or Structural Engineering.
    3. Familiarity with the Supplemental Type Certificate (STC) process

    REQUIRED SKILLS AND ABILITIES:
    1. Proficient with Microsoft Word, Excel, PowerPoint, Outlook, and Internet Explorer.
    2. Knowledge of Federal Aviation Regulations (FARs) governing aircraft certification Preferred.
    3. Ability to read, write, speak, and understand the English language.
    4. Computer Aided Drafting/Design - SolidWorks required
    5. Aviation background and electrical systems experience required.
    6. Strong knowledge of industry mechanical systems and documentation standards.
    7. Experience with electrical systems and components.
    8. Strong communication and problem-solving skills.
    9. Strong time-management and organizational skills.





    The Structures Company is an AA/EOE.
     
    Job Number: 339
    Job Location: IN
    Rate: $50-57/Hr. **DOE**
    Per Diem: Yes
    Duration: 12+ Months
    Start Date: ASAP
    Input Date: 11/18/2019
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Email: debbieaubert@thestructurescompany.com
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Design and Analysis Engineer

    Description:
    Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

    We are currently searching for the right talent to fill this opportunity:

    Design and Analysis Engineer
    (U.S. Citizenship Required*)
    Hazelwood, MO
    2019-9480
    Responsibilities:
    • Work with customers to develop and document complex electronic and electrical system requirements.
    • Analyze and translate requirements into system, hardware and software designs and interface specifications.
    • Test and validate to ensure system designs meet operational and functional requirements.
    • Monitor supplier performance to ensure system integration and compliance with requirements.
    • Solve problems concerning and provides other support of fielded hardware and software over the entire product lifecycle.
    • Researche specific technology advances for potential application to company business needs.
    • Position requires an engineer capable of performing analysis of reliability, maintainability, and system health of aircraft subsystems.
    • Evaluate failure mode effects and criticality analysis (FMECA) data from subsystem suppliers to create fault trees and model the fault behavior using MATLAB and Simulink.
    • Work with the latest generations of aircraft platforms (both commercial and military).
    • Develop diagnostic models from schematics, FMECAs, and other available supplier documentation.
    • Translate these models to a Times Failure Propagation Graph (TFPG) model via scripts.
    • Translate the information from the diagnostic models to MATLAB\SIMLINK models via scripts.
    • Work with a real-time software development team to create the Real Time Maintenance Computing (RTMC) application or other fault diagnostic reasoning engines.

    Qualification:
    • Ability to obtain a Secret Security Clearance is required.
    • Have a working knowledge of Fault Detection, Fault Isolation, False Alarm Mitigation, and No Fault Found (Can Not Duplicate).
    • Able to analyze complex electrical and mechanical subsystems is essential.
    *U.S. Citizenship is required by law, regulation, executive order, or government contract.

    Education and Experience:
    • Bachelor's Degree combined with 5+ years of experience in an engineering classification; or a Master's Degree with approximately 3+ years of experience in an engineering classification; or a PhD with experience in an engineering classification.
    • Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

    Conditions of Employment:
    Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

    About Our Company:
    Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

    Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

    Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

    Join a team that values your experience!
     
    Job Number: 2019-9480
    Job Location: Hazelwood, MO
    Input Date: 09/05/2019
    Firm Name: MOSELEY TECHNICAL SERVICES INC
    Address: 7500 S MEMORIAL PKWY STE 215-R
    City, State: HUNTSVILLE, AL 35802
    Phone: 256/880-0446
    Fax Phone: 256/880-0936
    Website: www.moseleytechnical.com

    Design and Analysis Engineer 3

    Description:
    Chipton-Ross is seeking 3 Design and Analysis Engineer 3's for openings in Hazelwood, MO.

    RESPONSIBILITIES:
    Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

    This Diagnostic Modeler position requires an engineer capable of performing analysis of reliability, maintainability, and system health of aircraft subsystems. Ability to analyze complex electrical and mechanical subsystems is essential. You will evaluate failure mode effects and criticality analysis (FMECA) data from subsystem suppliers to create fault trees and model the fault behavior using MATLAB and Simulink. You will work with the latest generations of aircraft platforms (both commercial and military).

    Candidarte should have a working knowledge of Fault Detection, Fault Isolation, False Alarm Mitigation, and No Fault Found (Can Not Duplicate). You will develop diagnostic models from schematics, FMECAs, and other available supplier documentation. The chosen candidate will translate these models to a Times Failure Propagation Graph (TFPG) model via scripts. The chosen candidate will also translate the information from the diagnostic models to MATLAB\SIMLINK models via scripts. The chosen candidate will work with a real-time software development team to create the Real Time Maintenance Computing (RTMC) application or other fault diagnostic reasoning engines.

    EDUCATION:
    Accredited Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

    TRAVEL: YES - 10%

    FULL TIME/FIRST SHIFT
    WORK HOURS: 8:00 AM - 4:30 PM

    MISCELLANEOUS:
    Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
     
    Job Number: 181215
    Job Location: Hazelwood, MO
    Rate: $DOE
    Duration: 12 Months
    Input Date: 08/22/2019
    Last Updated: 11/18/2019
    Firm Name: CHIPTON ROSS
    Attention: Kevin Suk
    Address: 420 CULVER BLVD
    City, State: PLAYA DEL REY, CA 90293
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: ksuk@chiptonross.com
    Website: www.chiptonross.com

    Designer, Bleed Air Systems/Vapor Cycle Systems

    Description:
    PDS Tech is currently recruiting for a Bleed Air Systems Engineer in Greensboro, NC.

    General Summary: 

    The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.
     
    Duties and Responsibilities:

    • Prepare 3D layout models of the BAS and VCS.
    • Prepare 3D installation and detail models of the BAS and VCS.
    • Prepare 2D installation, assembly and detail drawings of the BAS and VCS.
    • Work in a team environment supporting liaison engineering to research root cause and address production discrepancies.

    Education, Work Experience, Certification and/or Licensure:



    • Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program with 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.

     
    Knowledge, Skills and Abilities:


    • Experience using CATIA V5 to prepare 3D parametric models and 2D drawings.  Minimum of 10,000 hours.
    • Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
    • Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS.

     
    Job Number: 1910096770
    Job Location: Greensboro, NC
    Duration: 12 months
    Input Date: 04/09/2019
    Last Updated: 11/18/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Thomas Levitt
    Address: 11828 W CENTRAL STE 100
    City, State: WICHITA, KS 67212-5129
    Phone: 316/729-1800
    800 Phone: 800/333-8644
    Fax Phone: 316/729-1857
    Email: cecjwichita@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002r6AwQAI&URLSource=cjhunter

    DrivMatic Operator

    Description:
    Drivmatic, Riveting, Assembly, Manual

    RESPONSIBILITIES:
    " Performs a variety of DrivMatic, riveting and structural assembly operations
    " Performs structural assembly, riveting and inspection operations of major components and assemblies
    " Approves and stamps acceptable assemblies that meet specifications and reject assemblies that do not meet requirements
    " Assures quality conformance to company/customer requirements and specifications. Responsible for assuring final quality acceptance of installations, configuration and operational response of mechanical systems, structures, components and controls.
    " Adheres to all applicable safety and operational procedures and directives
    " Brings to the attention of supervision/lead, and documents all malfunctions, defects and damages of equipment, material and product
    " Keeps work areas clean and orderly
    " May be required to perform other duties as needed

    REQUIRED EXPERIENCE:
    " Minimum of 5 years of experience in aircraft sheet metal and/or equivalent structural assembly
    " Understands engineering drawings, blueprints, quality procedures and instructions, operation sheet, procedures, work sheets and verbal instructions
    " Structural assembly, riveting and inspection operations of major components preferred
    " Previous experience operating numerical control (NC) Drivmatic Riveting Machines, manual riveting machines or with robotics preferred

    EDUCATION:
    Accredited High School Diploma/GED

    WORK HOURS:
    Full-Time


     
    Job Number: 179646
    Job Location: Stuart, FL
    Rate: $20 to $25.00 DOE
    Duration: 6+ Months
    Input Date: 06/03/2019
    Last Updated: 11/18/2019
    Firm Name: CHIPTON ROSS
    Attention: Kristie Hardage
    Address: 420 CULVER BLVD
    City, State: PLAYA DEL REY, CA 90293
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: knguyen@chiptonross.com
    Website: www.chiptonross.com

    ECS or Bleed Air Systems Design Engineer

    Description:
    General Summary:
    The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

    Duties and Responsibilities:
    1. Prepare 3D layout models of the BAS and VCS.
    2. Prepare 3D installation and detail models of the BAS and VCS.
    3. Prepare 2D installation, assembly and detail drawings of the BAS and VCS.
    4. Work in a team environment supporting liaison engineering to research root cause and address production discrepancies.

    Education, Work Experience, Certification and/or Licensure:
    1. Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program with 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.

    Knowledge, Skills and Abilities:
    1. Experience using CATIA V5 to prepare 3D parametric models and 2D drawings. Minimum of 10,000 hours.
    2. Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
    3. Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS.




    The Structures Company is an AA/EOE.
     
    Job Number: 301
    Job Location: NC
    Rate: $55-$60/Hr - **DOE**
    Per Diem: Yes
    Overtime: Yes
    Duration: 10+ Months
    Start Date: ASAP
    Input Date: 10/28/2019
    Last Updated: 11/18/2019
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Email: debbieaubert@thestructurescompany.com
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    EMC Engineer w/Top Secret Clearance

    Description:
    *This is a full time, 15 month position, based in Fort Worth*



    We are hiring for an aircraft Electro Magnetic Compatibility Systems Engineer who will be creating EMC/EME requirements definition/compliance testing. Candidate will travel to many company sites to define the EMC requirements of the site, analyze and test equipment, systems, and aircraft to assure proper operation within the electromagnetic spectrum. Candidate will create design authority for electrical bonding, wire harness and other shielding, wire routing, and electrical ground system design



    Required:
    *8 years’ experience as a system or similar engineer in aircraft component EMC compatibility testing.
    *Knowledge of MIL-STD 464 and 461
    *Experience using tools such as PSpice (ORCAD), MATLAB and EXCEL.
    *Active Top Secret Clearance; US Citizens only.
    *Able to travel to company sites, 1-2 weeks at a time.
     
    Job Number: 106
    Job Location: Fort Worth, TX
    Rate: market
    Per Diem: yes split
    Input Date: 09/09/2019
    Last Updated: 10/16/2019
    Firm Name: CSS STAFFING
    Attention: Tom Clarke
    Address: 263 E MAIN ST 2ND FL STE A
    City, State: NEWARK, DE 19711
    Phone: 302/737-4920
    Website: www.cssstaffing.com

    EWIS Senior Components Engineer

    Description:
    We are seeking a Components Engineer with EWIS experience to fill an opening for an exciting company in Nagoya, Japan. Interested candidates should have at least 5 years of experience with electrical wiring interconnected systems (EWIS) specifically related to certification and airworthiness.

    Responsibilities of the EWIS Senior Components Engineer

    Evaluating aircraft design and creating analysis reports with respect to EWIS related airworthiness regulations of JCAB, FAA and EASA
    Creating and executing the EWIS group certification plan.
    Perform analysis for designs including the review of ground and flight tests, design reviews, inspections, and other system reports.
    Review the preparation of documents defining aircraft environment and approved part usage.
    Approve testing required for components and EWIS harness assemblies qualification.
    Review of manufacturing processes related to EWIS harness assembly construction and installation.
    Procure QTP/QTRs or similarity reports from EWIS components suppliers.
    Create QTP and conduct the Qualification Test, then prepare the QTR/QSAR(Qualification Similarity Analysis Report).
    Determine or update the qualification requirements of all EWIS components.
    Create and manage a strategy for EWIS components qualification, including proposing alternative parts to reduce weigh and or cost.
    Provide technical expertise and assist in resolving EWIS issues during any rig testing, Wire Harness manufacturing or Wire Harness Installation.

    Requirements

    Excellent working experience in commercial aerospace.
    4 year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation)
    5-10 years of experience with EWIS and air fact certification.
    Excellent communication skills.
     
    Job Location: Japan
    Input Date: 11/14/2019
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Miguel Calderon
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Email: Mcalderon@velocity-cs.com
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Designer

    Description:
    Electrical Designer

    Chula Vista, CA
    $48.25/hr
    15 month W2 contract
    First Shift
    *MUST BE A U.S. CITIZEN*
    **NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

    Description:
    Master electrical harness and electrical wiring interconnect system (EWIS) designer.

    Responsible for design and routing of electrical harnesses across equipment product quite. Requires design skill mastery of CATIA V5 and Electrical Workbench including EHI and EHF.

    Ability to design, release, manage, status and prioritize electrical harness design and supporting documents with minimal guidance or supervision.

    Ability to design and demonstrate compliance to EWIS standards. This includes generating requirement compliance matrices.

    Additional responsibility to support design changes to existing electrical harnesses. Harnesses will be used throughout aircraft engine nacelles, including, but not limited to, thrust reverser actuation equipment, fan cowls, engine build up and nacelle inlets.

    Expert experience with EWIS, pin/connector wire design, lightning/bonding & grounding. Experience with wiring/harness failure mode and effect analysis is strongly preferred.
     
    Job Number: 11397
    Job Location: Chula Vista, CA
    Rate: 48.25
    Per Diem: No
    Overtime: Possible
    Duration: 15 months
    Start Date: ASAP
    Input Date: 08/26/2019
    Last Updated: 09/10/2019
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer

    Description:
    1) AutoCad required, Catia V5 and CHS preferred. 2) GV,GVI, electrical system design experience preferred. 3) 14 CFR 25 Subpart H - EWIS experience preferred 4) Part 25 Certification Experience for Cabin Interiors preferred 5) Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems. 6) Experience with power distribution, lighting, switching, sizing and routing. 7) Familiarity in mechanical system design 8) Familiarity with aircraft STC procedures preferred. 9) Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required

    Education and Experience Requirements:
    Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


    Position Purpose:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

    Principle Duties and Responsibilities:

    Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

    Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred
    The level of technical skill and abilities appropriate for this grade will be established by each discipline


    The Structures Company is an AA/EOE.
     
    Job Number: 318
    Job Location: GA
    Rate: $55-$63/Hr. DOE
    Per Diem: Yes
    Duration: 10+ Months
    Start Date: ASAP
    Input Date: 07/31/2019
    Last Updated: 09/21/2019
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer

    Description:
    Electrical Engineer

    Location: Savannah, GA
    Rate: $58.00 - $63.00/HR
    Duration: Long Term Contract
    Shift: 4x10
    Overtime: Possible (x1.5)
    Per Diem Split: Yes (if eligible)

    ****MUST be a U.S. Citizen or Permanent Resident****

    Required Skills:
    1. AutoCad required, Catia V5 and CHS preferred.
    2. GV, GVI, electrical system design experience preferred.
    3. 14 CFR 25 Subpart H - EWIS experience preferred
    4. Part 25 Certification Experience for Cabin Interiors preferred
    5. Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
    6. Experience with power distribution, lighting, switching, sizing and routing.
    7. Familiarity in mechanical system design
    8. Familiarity with aircraft STC procedures preferred.
    9. Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required

    Education and Experience Requirements:
    1. Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    2. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors.
    3. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

    Position Purpose:
    1. Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

    Principle Duties and Responsibilities:
    Essential Functions:
    1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
    2. Is consulted extensively by associates and others as a recognized authority within the field
    3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
    4. Approach to problem solving balances technical product, cost and schedule
    5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
    6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions:
    1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
    2. Perform other duties as assigned.

    Other Requirements:
    1. Advanced degree in engineering, or related curriculum preferred.
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 11060
    Job Location: Savannah, GA
    Rate: $58.00 - $63.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/12/2019
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    Electrical Engineer

    Description:
    Position Purpose:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

    Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
    Unique Skills:
    1) AutoCad required, Catia V5 and CHS preferred.
    2) GV,GVI, electrical system design experience preferred.
    3) 14 CFR 25 Subpart H - EWIS experience preferred
    4) Part 25 Certification Experience for Cabin Interiors preferred
    5) Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
    6) Experience with power distribution, lighting, switching, sizing and routing.
    7) Familiarity in mechanical system design
    8) Familiarity with aircraft STC procedures preferred.
    9) Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required

    Education and Experience Requirements:
    Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
     
    Job Number: 374101
    Job Location: Savannah, GA
    Rate: TBD
    Duration: 12 - months
    Start Date: ASAP
    Input Date: 06/06/2019
    Last Updated: 11/18/2019
    Firm Name: CTS INTERNATIONAL
    Address: 11100 NE 8TH ST STE 800
    City, State: BELLEVUE, WA 98004
    Phone: 425/451-0051
    Fax Phone: 425/635-7630
    Email: cjhunter@ctsinternational.com
    Website: www.ctsinternational.com

    Electrical Engineer (2) - SC

    Description:
    Chipton-Ross is seeking 2 Electrical Engineers located in Greenville, SC

    RESPONSIBILITIES:
    looking to fill an Electrical Engineer position within the Design & Integration skill set to support an Avionics Upgrade (CNS/ATM) project.
    The ideal candidate will be responsible for providing electrical engineering avionics designs in support of CNS/ATM upgrade on a C-130H aircraft. This includes development/design of block diagrams, wiring diagrams, and cable assemblies for avionics system installations.

    REQUIRED EXPERIENCE:
    Experience developing ground and flight test procedures and assisting the production team as required during installation and test is also required.
    "Must be experienced with Engineering design software for electrical design.
    "Ability to understand schematics, generate interconnect diagrams and troubleshoot equipment installations
    "Experience with aircraft architectures and electrical integration of avionics subsystems

    EDUCATION:
    Accredited Bachelor's Degree in Electrical Engineering or equivalent design experience with at least 10 years of electrical design.

    WORK HOURS:
    Full-Time/First Shift 0630-1600

     
    Job Number: 176357
    Job Location: Greenville, SC
    Rate: $DOE
    Duration: 12 MONTHS
    Input Date: 04/04/2019
    Last Updated: 11/18/2019
    Firm Name: CHIPTON ROSS
    Attention: Patrick Costello
    Address: 420 CULVER BLVD
    City, State: PLAYA DEL REY, CA 90293
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: pcostello@chiptonross.com
    Website: www.chiptonross.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer - Avionics System

    Description:
    -LOCATION PACIFIC NORTH WEST-
    Design, develop and integrate products, tools and or systems
    • Perform testing and analysis to validate designs
    • Prepare specifications, and assist with the development of processes
    • Perform research, and prepare documentation, reports, procedures and tests
    • Collect and correlate data, recognizing discrepancies in results
    • Perform project execution from conception to completion
    • Support portions of projects being performed by co-workers
    • Create and update electrical drawings
    • Address parts obsolescence and upgrades
    • Bachelor of Science degree in electrical engineering from an accredited university (or equivalent experience)
    • Catia/CAD proficiency required
    • Aircraft design and avionics systems
    • General understanding of how systems interact in a small aircraft
    • Demonstrated ability to learn new technical areas and skills to support multiple projects
    • Ability to consistently demonstrate respect and support of our company vision, mission and values
     
    Job Number: 999898
    Job Location: PACIFIC NORTH WEST, PACIFIC NORTH WEST
    Rate: open
    Per Diem: possible
    Overtime: possible
    Duration: Long Term
    Start Date: ASAP
    Input Date: 06/07/2019
    Last Updated: 09/26/2019
    Firm Name: ADVANCED TECHNOLOGY
    Attention: Domenic
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Website: www.advancedtechno.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer - Clearance CA

    Description:
    165775
    Job Title: Electrical Engineer

    Work Site Address: Palmdale, CA 93599
    Job Number: 1708-1
    Max Pay Rate: $78.00/hr
    Start Date: 7/6/2019
    End Date: 1/10/2020
    Position Type: Contract


    Job Summary:
    Looking for world-class talent in engineering to join the 75 year tradition of creating advanced aircraft. This position requires a Signals Intelligence (SIGINT) Engineer to use their technical, program, and systems expertise to design, develop, integrate, and qualify systems for advanced aircraft. The candidate will define specifications, system integration and troubleshooting, and perform aircraft checkout procedures. The candidate must be effective working in team environments, coordinating with multiple engineering disciplines internal and external. Strong verbal and writing skills are essential. The candidate must be able to interact with single or multiple Sensor Suppliers and direct tasking required for successful development and integration of a Sensor System.

    Job Description:
    i. Provide technical support to customer activities and programmatic processes
    ii. Develop documents and briefings to communicate work or study status, brief Program Management as required
    iii. Provide task-based schedule and resource forecasts
    iv. Subcontract management experience
    v. Develop Concept of Operations (CONOPS) for new capabilities and coordinate them across the affected organizations
    vi. Assist in the development of system level, functional level and interface requirements
    vii. Identify gaps between requirements and acquisition program capabilities being conducted by the customer
    viii. Manage the Request for Change (RFC) process as it relates to closing requirement gaps
    ix. Work with the enterprise architects to update related design documents to identify, clarify, and track task requirements and issues, remove barriers, resolve minor project issues and escalate to immediate manager where required

    Qualifications and Education Requirements
    BS+16 YRS or MS+14 YRS

    Systems integration experience
    Avionics Experience

    Qty 1 position needed
     
    Job Number: JE-1708-1TS5
    Job Location: Palmdale, CA
    Rate: 78/hr
    Duration: 6 months +
    Input Date: 07/25/2019
    Last Updated: 10/03/2019
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    Electrical Engineer - no clearance SC

    Description:
    164638/1659-1 Electrical Engineer
    Need Date: A.S.A.P
    Number of Openings 1
    Length of Assignment Estimated one (1) year
    Hourly Pay Rate: $58
    Possible Temp to Hire? No
    Shift, Start & End Time 1st: 0630-1600
    Specific Work Location Greenville, SC



    Job Description:
    Greenville Operations, SC is currently looking to fill an Electrical Engineer position within the Design & Integration skill set to support an Avionics Upgrade (CNS/ATM) project.

    The ideal candidate will be responsible for providing electrical engineering avionics designs in support of CNS/ATM upgrade on a C-130H aircraft. This includes development/design of block diagrams, wiring diagrams, and cable assemblies for avionics system installations. Experience developing ground and flight test procedures and assisting the production team as required during installation and test is also required.

    Minimum Requirements:
    (Education, years of experience, specific skills or tools, etc.)
    • Bachelor's Degree in Electrical Engineering or equivalent design experience with at least 10 years of electrical design.

    • Must be experienced with Engineering design software for electrical design.

    • Ability to understand schematics, generate interconnect diagrams and troubleshoot equipment installations.

    • Experience with aircraft architectures and electrical integration of avionics subsystems.
     
    Job Number: JEG -1659-1
    Job Location: Greenville, SC
    Rate: 58/hr max
    Per Diem: no
    Duration: 12 months
    Input Date: 10/29/2019
    Last Updated: 11/14/2019
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Email: jeana@midcom.com
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer 4

    Description:
    Unique Skills:
    • AutoCad required, Catia V5 and CHS preferred.
    • GV,GVI, electrical system design experience preferred.
    • 14 CFR 25 Subpart H - EWIS experience preferred
    • Part 25 Certification Experience for Cabin Interiors preferred
    • Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
    • Experience with power distribution, lighting, switching, sizing and routing.
    • Familiarity in mechanical system design
    • Familiarity with aircraft STC procedures preferred.
    • Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required

    Position Purpose:
    Works on engineering projects containing critical problems, the solution of which requires major technological advances and extensive related development

    Principle Duties and Responsibilities:
    • Responsible for an entire engineering project of major complexity within established scope
    • Makes technical decisions and recommendations that are recognized as authoritative and have an important impact on extensive engineering activities
    • Applies advanced technical principles, theories and concepts based on broad expertise or unique specialized knowledge
    • Leads the development of innovative principles and ideas
    • Acts independently to determine improved methods and/or procedures to optimize technical product, cost and schedule requirements
    • Works under consultative direction; uses independent judgment to accomplish objectives
    • Develops standards and guides for diverse engineering activities
    • Conceives and plans investigation of broad areas of importance for which engineering precedents are lacking in areas critical to the program Perform other duties as assigned.
    • Advanced degree in engineering or related curriculum preferred.
    • The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 24-362
    Job Location: Savannah, GA
    Rate: $58 - $63
    Per Diem: YES
    Overtime: YES
    Duration: 1 year plus
    Start Date: ASAP
    Input Date: 08/23/2019
    Last Updated: 09/16/2019
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Systems Design Engineer - Contract AND Direct Position Available

    Description:
    General Summary:
    The Electrical Systems Engineer provides expertise in support of electrical/electronic systems through all phases of a project, including preliminary design, detailed design, development, certification, production, and product support.

    Duties and Responsibilities:
    Design, development and certification support of the aircraft Electrical Power System, including power generation, distribution and energy storage

    Qualifications

    Education, Work Experience, Certification and/or Licensure:
    BS in an Engineering related discipline required, Master’s degree preferred
    5 or more years of aviation experience with 8 or more years of directly related experience involving design, development and certification of electrical/electronic power systems
    Knowledge of FAR Part 23 or 25 regulations
    Knowledge of RTCA/DO-160, RTCA/DO-178 and RTCA/DO-254 processes preferred
    Knowledge of system modeling and analysis tools preferred



    The Structures Company is an AA/EOE.
     
    Job Number: 320
    Job Location: NC
    Rate: $125K - $60/Hr.
    Per Diem: Yes
    Overtime: Yes
    Duration: 12+ Months
    Start Date: ASAP
    Input Date: 08/12/2019
    Last Updated: 09/25/2019
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electro-Magnetic Effects Engineer

    Description:
    • As Electro-Magnetic Effects (EME) Engineer you will report directly to the Vice President of Systems Engineering / Aircraft level Integration Team (ALIT) and will be responsible for defining the technical requirements relating to all aspects of EME.

    On any given day you might:
    • Perform analysis and design relating to effects of lightning (direct and indirect), surface charging, grounding, structural bonding, circuit isolation, transfer impedance, shielding effectiveness, effects of radiated/conducted emissions and susceptibility, near field/far field electric fields, corona, P-static, etc.
    • Provide aircraft level EME guidance
    • Establish requirements, processes and methodologies (EMC, EMI, HIRF, LSP, G&B, RF, etc)
    • System design and architecture analysis
    • Interact directly with suppliers
    • Define traceability to the FARs
    • Perform and teach electromagnetic compatibility design and analysis
    • Perform computational electromagnetics calculations and assessments
    • Validate and verify of requirements
    • Provide guidance for System test and certification
    • Report Status
    • Provide subject-matter expert level guidance on both practical and theoretical aspects of the EME systems design
    • Provide support for engineering, certification, and flight test departments from concept to product certification
    • Foster a culture that inspires high levels of performance and employee retention
    • Provide EME guidance to the various Sub-systems and Structures IPTs in support of their development and certification

    We're looking for someone who has:
    • Bachelor’s degree in relevant field required.
    • 5+ years of experience within the EME discipline.
    • EME systems design and integration experience
    • Aircraft development experience
    • Experience Developing EME processes, guidelines and methodologies to support the design of the Aerion AS2
    • Demonstrate a clear understanding of industry guidelines and documents (MIL-STD-285, MIL-STD-461, MIL-STD-464, SAE ARP5412, SAE ARP5414, AC 20-53A, AC 20-107, DO-160, MIL-STD-1541, MIL-STD-1757, etc)
     
    Job Number: 42-035
    Job Location: Reno, NV
    Rate: DOE, but very competitive
    Per Diem: Yes
    Overtime: Possible
    Duration: 1+ years
    Start Date: ASAP
    Input Date: 08/23/2019
    Last Updated: 09/16/2019
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electro-Magnetic Effects Engineer (EME)

    Description:
    Perform analysis and design relating to effects of lightning (direct and indirect), surface charging, grounding, structural bonding, circuit isolation, transfer impedance, shielding effectiveness, effects of radiated/conducted emissions and susceptibility, near field/far field electric fields, corona, P-static, etc.
    • Provide aircraft level EME guidance
    • Establish requirements, processes and methodologies (EMC, EMI, HIRF, LSP, G&B, RF, etc)
    • System design and architecture analysis
    • Interact directly with suppliers
    • Define traceability to the FARs
    • Perform and teach electromagnetic compatibility design and analysis
    • Perform computational electromagnetics calculations and assessments
    • Validate and verify of requirements
    • Provide guidance for System test and certification
    • Report Status
    • Provide subject-matter expert level guidance on both practical and theoretical aspects of the EME systems design
    • Provide support for engineering, certification, and flight test departments from concept to product certification
    • Foster a culture that inspires high levels of performance and employee retention
    • Provide EME guidance to the various Sub-systems and Structures IPTs in support of their development and certification
    We're looking for someone who has:
    • Bachelor’s degree in relevant field required.
    • 5+ years of experience within the EME discipline.
    • EME systems design and integration experience
    • Aircraft development experience
    • Experience Developing EME processes, guidelines and methodologies to support the design of the new aircraft
    • Demonstrate a clear understanding of industry guidelines and documents (MIL-STD-285, MIL-STD-461, MIL-STD-464, SAE ARP5412, SAE ARP5414, AC 20-53A, AC 20-107, DO-160, MIL-STD-1541, MIL-STD-1757, etc)
     
    Job Location: Reno, NV
    Rate: DOE
    Per Diem: Possible
    Overtime: Possible
    Duration: Temp to Perm
    Start Date: ASAP
    Input Date: 08/09/2019
    Last Updated: 11/13/2019
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Tara Gilbert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    Electronic Systems Design & Analysis Engineer 3

    Description:
    **Must be able to obtain a Secret Clearance**

    Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

    This Diagnostic Modeler position requires an engineer capable of performing analysis of reliability, maintainability, and system health of aircraft subsystems. Ability to analyze complex electrical and mechanical subsystems is essential. You will evaluate failure mode effects and criticality analysis (FMECA) data from subsystem suppliers to create fault trees and model the fault behavior using MATLAB and Simulink. You will work with the latest generations of aircraft platforms (both commercial and military).

    You should have a working knowledge of Fault Detection, Fault Isolation, False Alarm Mitigation, and No Fault Found (Can Not Duplicate). You will develop diagnostic models from schematics, FMECAs, and other available supplier documentation. The chosen candidate will translate these models to a Times Failure Propagation Graph (TFPG) model via scripts. The chosen candidate will also translate the information from the diagnostic models to MATLAB\SIMLINK models via scripts. The chosen candidate will work with a real-time software development team to create the Real Time Maintenance Computing (RTMC) application or other fault diagnostic reasoning engines.
    Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
     
    Job Number: 374149
    Job Location: Hazelwood, MO
    Rate: TBD
    Duration: 12 - months
    Start Date: ASAP
    Input Date: 08/23/2019
    Last Updated: 11/18/2019
    Firm Name: CTS INTERNATIONAL
    Address: 11100 NE 8TH ST STE 800
    City, State: BELLEVUE, WA 98004
    Phone: 425/451-0051
    Fax Phone: 425/635-7630
    Email: cjhunter@ctsinternational.com
    Website: www.ctsinternational.com

    Engineer – Aircraft Structural Modification Support

    Description:
    PDS Tech, Inc. is seeking an Aircraft Structural Modification Support Engineer in Lexington, MA. 

    Aircraft Structural Modification Support
    2. Background/Need
    Group 108 works to understand air defense issues, in particular, air vehicle survivability, vulnerability of U.S. Air Force (USAF) aircraft to weapons systems, electronic countermeasures, and air surveillance for homeland defense. The focus is on understanding USAF and threat air defense systems through tests and measurements. Test activities include flight, field, and laboratory testing. We operate three airplanes, all highly instrumented and numerous ground systems as needed for test efforts. We also develop new hardware for testing and prototype systems as well as for instrumenting existing sensors. Group 108 requires for one full time Engineer to support the aircraft structural modification project.
    3. Position Scope/Job Functions
    Candidate will be responsible for the management of a multi-year transformation of a Gulfstream IV-SP into the next Airborne Sensor Test Bed (ASTB). The project entails major airframe modifications including fuselage and wing strengthening, the integration of under wing / centerline instrumentation pods, nose and tail electromagnetic and optical sensors, a sonobuoy or dropsonde release system and major electrical/data infrastructure. Candidate will participate in overseeing vendors performing the necessary aircraft modifications and ensuring that the work is properly executed, documented and delivered on schedule. Support will also include design and conduct of a flight test program to demonstrate compliance with modifications specifications and to obtain FAA approvals for continued operations. Related work will include establishment of a configuration management program and documentation archive to support the aircraft throughout its life.
    4. Skills: Required
    - Direct program management experience of significant aircraft structural modifications
    - Experience with sensor and or mission system integration to turbine powered aircraft
    - Experience in the design and conduct of flight test programs for certification of major modifications
    - Familiarity with design and conduct of aircraft structural demonstration, stability and control, flutter, handling qualities, and performance flight tests
    - Familiarity with the requirements for and development of certification documentation, particularly Flight Manual Supplements
    - Subject Matter Expertise with 14 CFR (FAR) Part 91 repair, overhaul, maintenance and modification requirements, Supplemental Type Certificate (STC) processes, and Experimental Type Certificate approval processes
    - Working knowledge of 14 CFR (FAR) Part 25 certification requirements, particularly in the areas of damage tolerance analysis and instructions for continuing airworthiness
    - Familiarity with Configuration management tools and processes
    - Experience with MS Office tools (Word, PowerPoint, Excel and Project)
    - Ability to produce and present accurate and timely status reports and presentations both written and oral to all levels of management
    - Familiarity with Federal Acquisition Regulations
    5. Skills: Preferred
    - Experience with FAA certification of modifications designed to carry external stores on
    commercial aircraft
    - Experience overseeing the structural modification of GIV, GIV-SP or GV Gulfstream aircraft
    desired
    - Airframe and Powerplant License
    - Designated Engineering Representative (DER) with a Structures and Electrical rating
    - Designated Airworthiness Representative (DAR) rating is desired
    - Demonstrated ability to lead a disparate team of engineers, technicians, and support personnel
    towards a common goal
    6. Education/Professional Certifications
    MS plus three (3) years minimum relevant experience or BS plus five (5) years minimum relevant
    experience
    7. Laboratory-furnished equipment and information
    Office space and a Laboratory desktop computer will be supplied.
    8. Place of Performance
    Work will be performed at the MIT LL Flight Test Facility, Hanscom Air Force Base, Bedford, MA, Bldg
    1715 location. Extensive travel to oversee modification/flight test activities at contractor facilities (US
    and Canada) is required. Anticipate approximately 50% travel to vendor locations.
    9. Period of Performance (PoP)
    Three (3) year period of performance is required.
    10. Security
    All personnel must successfully pass a Commercial Background Investigation (CBI) and hold at least an
    Interim Secret security clearance before receiving facility access.
    Will the performance of work require access to classified information? YES
    What level of clearance is required? SECRET

    Education requirements:
     
    • MS plus three (3) years minimum experience in Aeronautical / Aerospace Engineering with a Structural Focus desired or BS plus five (5) years minimum experience is required.

     
    Required Qualifications:
     
    • Direct program management experience of significant aircraft structural modifications
    • Experience with sensor and or mission system integration to turbine powered aircraft
    • Experience in the design and conduct of flight test programs for certification of major modifications
    • Familiarity with design and conduct of aircraft structural demonstration, stability and control, flutter, handling qualities, and performance flight tests
    • Familiarity with the requirements for and development of certification documentation, particularly Flight Manual Supplements
    • Subject Matter Expertise with 14 CFR (FAR) Part 91 repair, overhaul, maintenance and modification requirements, Supplemental Type Certificate (STC) processes, and Experimental Type Certificate approval processes
    • Working knowledge of 14 CFR (FAR) Part 25 certification requirements, particularly in the areas of damage tolerance analysis and instructions for continuing airworthiness
    • Familiarity with Configuration management tools and processes
    • Experience with MS Office tools (Word, PowerPoint, Excel and Project)
    • Ability to produce and present accurate and timely status reports and presentations both written and oral to all levels of management
    • Familiarity with Federal Acquisition Regulations
    • U.S. Citizenship required
    • Ability to obtain and maintain a security clearance

     
    Desired Qualifications:
     
    • Experience with FAA certification of modifications designed to carry external stores on commercial aircraft
    • Experience overseeing the structural modification of G-IV, G-IVSP or GV Gulfstream aircraft desired

    Airframe and Powerplant License

    • Designated Engineering Representative (DER) with a Structures and Electrical rating
    • Designated Airworthiness Representative (DAR) rating is desired
    • Demonstrated ability to lead a disparate team of engineers, technicians, and support personnel towards a common goal

    Personnel possessing an active SECRET clearance is desired. All personnel must successfully pass a Commercial Background Investigation (CBI). In addition, they may begin with an interim clearance but must obtain and maintain a SECRET clearance.

     
     
    Job Number: 1910104407
    Job Location: Bedford, MA
    Duration: 36 months
    Input Date: 07/17/2019
    Last Updated: 11/18/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Phil Press
    Address: 370 N WESTLAKE BLVD STE 120
    City, State: WESTLAKE VILLAGE, CA 91362
    Phone: 805/418-9862
    800 Phone: 866/458-4322
    Fax Phone: 805/418-9866
    Email: cecjwestlake@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GTYtQAO&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Entry Into Service Specialist

    Description:
    We are seeking an EIS engineer with working experience in commercial aerospace for an Original Equipment Manufacturer (OEM) as well as ample Entry into Service experience. Interested candidates will be responsible for coordinating all the processes, requirements and customer requests related to the Entry into Service of a new aircraft.

    Responsibilities of the Entry Into Service Specialist

    Coordinate and integrate all the areas responsible for the Entry into service including:
    Flight operations engineering and pilots, training support, program management, material and services support and production lines.
    Maintenance support and technical publications
    Contracts management.
    Air safety and certification teams and ground support equipment
    Ensuring that the Master Plan agreed upon with the customer is complete following each deadline this includes the follow areas:
    Initial Pilot Training
    Initial Flight Attendant Training
    Pilot Support (En Route Supervision)
    Flight Operations Engineering Course (FOEC)
    Flight Operations Engineering Support
    Pilot Support (Ferry Flight)
    RAS or SCAP Module
    Inflight Performance Software
    Performance SW
    Reconfig. of the Flight Operations Publications Set
    Dispatcher SW
    Flight Dispatchers Course
    Balance & Trim Chart
    Maintenance Theoretical Type Training (B1 + B2)
    Maintenance Practical Type Training (B1 + B2)
    Technical Representative
    Maintenance Specialists Support
    Health Monitoring Training (Basic Module) & CMC Usage
    Maintenance Program Start-up and Packaging
    Reliability Training
    Techpubs Subscription and training
    RSPL Budgetary
    MPD/MMEL
    Suppliers Conference
    TC Approval
    Aircraft Operator Certificate Operational Approval
    Direct Maintenance Cost
    MRO Certification
    GSE

    Requirements of the Entry Into Service Specialist

    Working experience in commercial aerospace with an Original Equipment Manufacturer (OEM).
    8 or more years experience with Entry into Service for new aircrafts.
    Excellent working relationship with airline customers and suppliers.
    Knowledge of the aircraft delivery process.
    Working experience in customer support industry and supplier negotiation.
    Team management skills.
     
    Job Location: Japan
    Duration: 2 Years
    Start Date: ASAP
    Input Date: 09/25/2019
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Susan McGlinsey
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Equipment & Furnishing Engineer (TSII)

    Description:
    Position Purpose:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

    Unique Skills:
    The ideal candidate for the Mechanical Systems Engineer (TS II) opening at Gulfstream should have the following experience but not required:
    • Prior experience in Mechanized systems such as Doors, Equipment and Furnishings, Flight Control or Landing Gear. Prior Gulfstream experience is desired.
    • Must have experience with Catia V5, Smarteam Database, Surfacing & Kinematics is highly desired.
    • Past experience with Secondary Structure and Machined parts with Model Base Definition and GD&T proficient.
    • 14 CFR Part 25 A/C Cert familiarity
    • Mechanical Systems Engineering experience required. ARP4754A experience desired
    • Catia V5, Smarteam Database, Surfacing and Kinematics Highly Desired.

    Education and Experience Requirements:
    • Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
    • 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
    • Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

    Principle Duties and Responsibilities:
    • Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
    • Is consulted extensively by associates and others as a recognized authority within the field
    • Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
    • Approach to problem solving balances technical product, cost and schedule
    • Works without appreciable direction; work is reviewed from a long-range perspective for desired results
    • Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
    • Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
    • Perform other duties as assigned.

    Other Requirements:
    • Advanced degree in engineering, or related curriculum preferred.
    • The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 24-345
    Job Location: Savannah, GA
    Rate: $63/hr
    Per Diem: YES
    Overtime: YES
    Duration: 1 YR+
    Start Date: ASAP
    Input Date: 08/23/2019
    Last Updated: 09/16/2019
    Firm Name: PRECISION PERSONNEL INC
    Attention: Brandon
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Equipment & Furnishings Engineer

    Description:
    Location: Savannah, GA
    Rate: $63.00/HR
    Duration: Long Term Contract
    Overtime: Possible (x1.5)
    Per Diem Split: Yes (if eligible)

    ****MUST be a U.S. Citizen or Permanent Resident****

    The ideal candidate for the position should have the following experience but not required:
    - Prior experience in Mechanized systems such as Doors, Equipment and Furnishings, Flight Control or Landing Gear.
    - Prior company experience is desired.
    - Must have experience with Catia V5, Smarteam Database, Surfacing & Kinematics is highly desired.
    - Past experience with Secondary Structure and Machined parts with Model Base Definition and GD&T proficient.
    - 14 CFR Part 25 A/C Cert familiarity
    - Mechanical Systems Engineering experience required.
    - ARP4754A experience desired

    Education and Experience Requirements:
    - Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
    - 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
    - Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

    Position Purpose:
    - Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services

    Principle Duties and Responsibilities:
    Essential Functions:
    1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
    2. Is consulted extensively by associates and others as a recognized authority within the field
    3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
    4. Approach to problem solving balances technical product, cost and schedule
    5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
    6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions:
    1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

    Other Requirements:
    1. Advanced degree in engineering, or related curriculum preferred.
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 10701
    Job Location: Savannah, GA
    Rate: $63.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Input Date: 03/26/2019
    Last Updated: 09/18/2019
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    F-35 Project Management Support CA

    Description:
    165930 Job Title: F-35 Project Mgmt Support

    Work Site Address: 1 Space Park Blvd, Redondo Beach, CA 90278
    Job Number: 1795 (19023764)
    Max Pay Rate: 38.00
    Start Date: 8/19/2019
    End Date: 08/14/2020
    Position Type: Contract



    Job Description:
    Focused support within the F-35 Fleet Modifications (FM) Team to fulfill various project planning, status reporting, and augmented Cost Account Management (CAM) responsibilities. Support the FM Team Manager to accomplish a variety of precise, time-sensitive and high-quality monthly deliverables, metrics and presentations. Responsibilities include; collecting, editing and preparing incremental accomplishment data, reports and metrics; assessing team performance to plan and defining estimate to complete projections; development of team labor charging recommendations; determining earned value variance causes, explanations and corrective recommendations/actions; assist in developing proposal response basis of estimates, to include long term staffing forecasts/implications; and coordinating within the team as a focal point to enable efficient collaboration with other functional organizations. Assist with development of proposal Basis of Estimate (BOE) artifacts and supporting rationale documentation. Must possess excellent interpersonal, written and oral communication skills. Position requires a resourceful, independent self-starter able to analyze and solve CAM derived objectives involving solicitations of and commitments from various stakeholders.


    Qualifications and Education Requirements

    •Solid background and understanding of Project Management fundamentals
    •Bachelor’s degree
    •3 years of relevant experience
    •Proficient in applying Cost Account Management/Earned Value principles
    •Adept in developing products in MS Word, Excel, Project and Power Point
    •Exceptional verbal, written, presentation, and leadership skills
    •Bachelor degree from an accredited college

    Preferred Skills

    •Cost Account Management / Professional Logistics Accreditation(s)
    •MS Access proficiency (creating queries, forms, reports and code/VBA)
    •Six Sigma Certification / Facilitation experience
    •Prior aircraft Maintenance, Repair, Overhaul and Upgrade (MRO&U) program experience
    •Familiarity with the F-35 program/platform a plus

    Location: Redondo Beach
    Schedule: 9/80
    Duration of assignment: Up to 1 year
     
    Job Number: JK-1795ATO
    Job Location: Redondo Beach, CA
    Rate: 38/hr max
    Duration: 1 year
    Input Date: 11/04/2019
    Last Updated: 11/11/2019
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    FEMAP FEA Analyst

    Description:
    Aircraft

    Job location: Montreal, Quebec Canada
     
    Job Location: Canada
    Input Date: 01/14/2015
    Firm Name: ADVANCED TECHNOLOGY
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Email: sclark@advancedtechno.com
    Website: www.advancedtechno.com

    FEMAP FEA Analyst

    Description:
    Aircraft
     
    Job Location: North Dakota
    Input Date: 01/14/2015
    Firm Name: ADVANCED TECHNOLOGY
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Email: sclark@advancedtechno.com
    Website: www.advancedtechno.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Fabricator / Machinist / no clearance / 1st or 2nd shift / 4 openings URGENT FL

    Description:
    165831 Job Title: Fabricator/Machinist
    Work Site Address: Pinellas, FL 33782
    Job Number: 492980
    Max Pay Rate: $23.00/hr
    Start Date: 7/31/2019
    End Date: 12 months from hire date
    Position Type: Contract

    Job Summary:
    Performs a variety of operations to manufacture, assemble and/or refurbish aircraft parts and structures such as F-16 canopies, F-35 canopies, and C-130 sub-assembly components. Assemblies can require controlled tooling as well as build to print. Tasks include aligning parts on jigs using both templates and fixtures. Performs part-fitting operations such as minor filing, sawing, burring, crimping, trimming, framing, drilling, reaming, riveting, countersinking, and cold working. Measures parts with a variety of methods to verify dimensions. May modify incomplete and complete assemblies to incorporate changes and perform repairs. Works from blueprint diagrams, drawings, specifications, and shop orders. Monitors and verifies quality and develops corrective action. Performs other duties as assigned. No relocation assistance provided.

    Job Description:
    Qualifications and Education Requirements
    High School Diploma or equivalent.
    Mathematical ability to perform and/or understand the calculations used in assigned areas and ability to read and interpret blueprints, specifications and technical data.
    3 + years in metal fabrication is desired.
    Must have some experience of CNC Mills, Routers, Brake and Roll Press.
    Be able to read and fabricate to Blue Prints specifications.
    Able to demonstrate and perform lay-out of sheet metal and extrusion parts.
    Must be willing to operate varying machines based on work load requirements.
    Competently uses computers and other systems to access, maintain, manipulate data.
    Must be a team player, can multi-task and get along with other team members, the desire to learn and accept several fabrication job functions.
    Must exhibit a genuine desire to achieve team goals. A positive attitude and dependability is a must for this position.

    Required Skills
    1 year of CNC Mills, Routers, Brake and Roll Press experience is required.
    3 + years in metal fabrication is desired.


    Qty 4 positions needed
    • Confirmation of Shift required
    Shift: M,T,W,Th 10 Hours, Friday Off
    1st Shift 6:00am to 4:30pm
    2nd Shift 5pm – 3:30am
     
    Job Number: LMPIN-492980
    Job Location: Pinellas, FL
    Rate: 23/hr
    Duration: 12 months
    Input Date: 09/17/2019
    Last Updated: 09/25/2019
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Fatigue & Damage Tolerance Engineers Needed

    Description:
    -Fatigue and Damage tolerance experience on primary and secondary airframe metallic structure required. MUST BE US Persons
    •Strong background in classical stress analysis.
    •Experience with Catia V5 to support stress analysis and drawing release.
    •Experience with reviewing 2D drawings.
    •Ability to work independently under limited supervision.
    •Experience with aircraft modifications and repairs (STC, MRB, or Service) preferred.
    •Experience with Patran/Nastran is a plus.
    •Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.

    Education and Experience Requirements:
    Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) ys in specific technical discipline or ten (10) yrs broad eng exp

    The Structures Company LLC is an AA/EOE.
     
    Job Location: Savannah, GA
    Rate: $75-80/hr DOE
    Per Diem: Yes
    Overtime: Yes
    Duration: Long-term
    Start Date: ASAP
    Input Date: 04/17/2019
    Last Updated: 10/15/2019
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Chris Sheets
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Fatigue and Damage Tolerance Engineer

    Description:
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

    Unique Skills:
    • Fatigue and Damage tolerance experience preferred on primary and secondary airframe metallic structure
    • Strong background in classical stress analysis.
    • Experience with Catia V5 to support stress analysis and drawing release.
    • Experience with reviewing 2D drawings.
    • Ability to work independently under limited supervision.
    • Experience with aircraft modifications and repairs (STC, MRB, or Service) preferred.
    • Experience with Patran/Nastran is a plus.
    • Strong preference for engineers that enjoy working in a collaborative environment.
    • Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.
     
    Job Number: 24-313
    Job Location: Savannah, GA
    Rate: $74 - $80
    Per Diem: YES
    Overtime: YES
    Duration: 1+ years
    Start Date: ASAP
    Input Date: 08/23/2019
    Last Updated: 09/16/2019
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    Fill & FairAssociate

    Description:
    Chipton-Ross is seeking a Fill & Fair Associate for an opportunity in Cypress, CA

    RESPONSIBILITIES:
    Prepare aircraft interior parts for decorative material application by filling and fairing plastic, metal, and composite parts and units using filling material.
    " Adhere to company specifications, work instructions, engineering prints, and work orders.
    " Document the materials used in the process to maintain traceability.
    " Clean panels in preparation for filling and fairing.
    " Mix and apply filling material to aircraft interior parts.
    " Fair parts after application and drying of filler.

    REQUIRED EXPERIENCE:
    " 1-3 years of experience in comparable role
    " Must be able to read and speak English
    " Previous experience in aerospace, manufacturing or automotive painting is preferred

    Preferred Qualifications:
    " Ability to read and interpret drawings and blueprints preferred
    " Previous experience in Aerospace Manufacturing preferred
    " Ability to understand and communicate in English (speak, read and write) at a level necessary for successful job performance

    Position Criteria:
    " Demonstrated ability in mixing and applying bondo, and subsequent inspection and sanding
    " The ability to read and write at a level necessary for successful job performance
    " Ability to work in a team environment; amicable

    EDUCATION:
    Accredited High School Diploma/GED

    WORK HOURS:
    Full-Time
    2nd shift 5:00pm-1:35am
    M-F + occasional voluntary Saturday + Daily OT

     
    Job Number: 180312
    Job Location: Cypress, CA
    Rate: $DOE
    Input Date: 07/11/2019
    Last Updated: 11/18/2019
    Firm Name: CHIPTON ROSS
    Attention: Kristie Hardage
    Address: 420 CULVER BLVD
    City, State: PLAYA DEL REY, CA 90293
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: knguyen@chiptonross.com
    Website: www.chiptonross.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Facility Design Engineer needed - AZ location

    Description:
    This individual will:
    Plan, design and oversee the construction of new or expanded facilities.
    Prepare architectural, engineering, and cost estimates, functional studies, construction plans, specifications, and schedules.
    Obtain and supervise outside contractors.
    Recommend architectural and engineering design procedures and standards for the planning and design of facilities.
    Supervise the detailed design, budgetary costing, standardized construction, and final inspection of facility projects.
    Conducts construction surveillance to ensure adherence to contractual requirements.
     
    Job Number: 5896541
    Job Location: Arizona
    Rate: open
    Per Diem: possible
    Overtime: possible
    Duration: Possible Temp to perm
    Start Date: 2wks-offer
    Input Date: 09/19/2019
    Last Updated: 09/26/2019
    Firm Name: ADVANCED TECHNOLOGY
    Attention: Domenic Avellino
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Website: www.advancedtechno.com

    Flight Control Engineer

    Description:
    We are currently seeking a for an experienced Flight Control Engineer to fill an opening for an aerospace company located in Renton, WA. Interested candidates should have experience with Verification and Validation as well as aircraft level requirements for flight controls systems.

    Responsibilities of the Flight Control Engineer

    System design, requirements management, systems specifications, interface management, system safety assessment, verification and validation testing, aircraft flight test and aircraft/system qualification and certification.
    Author flight test and ground test specifications for Flight Controls Systems.
    Analyze test data and evaluate system operation.
    Perform clean sheet component layouts for Flight Control Systems in support of schematic architecture.
    Prepare test reports.
    Evaluate requirements for traceability, correctness, and completeness.
    Provide analysis and input as required to verify compliance with ARP4754A and DO178C.
    Initiate and validate improvements to the design and documentation of the Flight Control System
    Ensure all schedule and cost objectives are meet as described.


    Requirements

    Bachelor, Master or Doctorate of Science degree in Engineering, Computer Science, Mathematics, Physics Or Chemistry.
    7 plus years of experience with flight controls in terms of both software and hardware.
    Excellent communication skills both written and verbal.
    Expert knowledge of ARP 4754 and DO178C.
    DER, UM, DAD Certification active or previous is highly preferred.
     
    Job Location: Renton, WA
    Input Date: 11/14/2019
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Miguel Calderon
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Email: mcalderon@velocity-cs.com
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Control System (ATA27) Safety Engineer

    Description:
    We are seeking an experienced System Safety Engineer with a Flight Control Systems background. Interested candidates should have at minimum 5 years of safety assessment experience as well as previous flight control experience.

    Responsibilities of the Flight Control System (ATA27) Safety Engineer

    To develop and finalize aircraft T/C design to be compliant to all applicable regulatory requirements and produce necessary documents.
    Perform all System Safety Assessments on Flight Control Systems.
    Create SFHA/SSA/CMA for related systems.
    Work on scheduling to resolve problems and mitigate risk.

    Requirements of the Flight Control System (ATA27) Safety Engineer

    4 year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation).
    5 plus years of experience with safety assessment in flight controls (ATA27)
    Must have excellent written and verbal communication skills in English.
    Previous aircraft or aviation experience.
     
    Job Location: Japan
    Start Date: ASAP
    Input Date: 09/06/2019
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Susan McGlinsey
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    Flight Control System Integration Engineer

    Description:
    In this role you will work and lead activities of Pilot Control System (PCS) as part of Secondary Flight Control System. This will include interfacing with all other aircraft functions and engineering team members to coordinate and obtain the approval of any task assigned contributing to the aircraft ‘Flight Control System’ Development and Certification.

    Scope of Work:
    1)     PCS System Engineer will work as a team member of Flight Control System Design Group - Secondary Flight Controls IPT.
    2)     Basic work scope is to develop and finalize aircraft T/C design, compliant to all applicable Requirements, under company schedule. This activity includes:
    i)       Evaluating the current aircraft design, with respect to compliance to the Flight Controls System/PCS related airworthiness regulations of JCAB, FAA and EASA.
    ii)      Lead the technical direction with design authority for all integration and development requirements.
    iii)     Coordinating integration of design change activities originated from Flight Controls System/PCS requirements when required.
    iv)    Oversight on design solutions engineered through requirements based management, complying with CFR 14 Part25, ARP4754A, DO178b, DO254, etc.
    v)     Support discussions and presentation of Flight Controls System Compliance with the Regulatory Authorities.
    vi)    Executing the requirements of the Type Certification Plan for ATA 27 Flight Controls. 
    vii)   Reporting on work status and progress through regular technical and program governance to upper management.
    viii)  Execute the plan, schedule and priorities directed by IPT and upper management. Where deviation to plans exists, proposed alternative methods or recovery plans to secure program objectives. 
    ix)    Responsible to ensure Flight Controls System/PCS schedule is complete, correct, updated and meet program objectives/milestones.
    x)     Responsible for Flight Controls System/PCS deliverables are released under program dates. Coordinate with other areas as required.
    xi)    Support other ATAs, IPTs and Departments (Customer Support, Flight Test, RIGS etc.) in relation to ATA27 dependencies to ensure they meet program milestones.
    xii)   Responsible for technical requirements integration with applicable Flight Controls System/PCS suppliers and other interfacing suppliers as appropriate.
    xiii)  Provide leadership and expertise to assist in resolving the Flight Control System Design Group performance during any rig testing or flight testing.
    3)     All tasks required to perform above activities are considered within work scope; initiating/ reviewing related documents, technical calculation, interface discussion with the team members and all the other stakeholders including systems, structures, manufacturing, customer support, and partners.

    The primary work location will be in Nagoya, Japan. However, engineers maybe requested to travel or relocate to Seattle or Moses Lake (Washington State, USA) where aircraft flight testing is performed. 
    Basic Qualifications
    ​- Working experience in commercial aerospace
    ​-10 or more years of experience as Compliance Engineer for Flight Controls System
    ​-Good communication skills in English


     
     
    Job Number: 1910106041
    Job Location: Nagoya,
    Duration: 24 months
    Input Date: 09/04/2019
    Last Updated: 11/18/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Chad Dunavant
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GYy7QAG&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Control Systems Engineer

    Description:
    We are seeking a Flight Control Systems engineer to fill an opening for a company located in Nagoya, Japan. Interested candidates should have a 4 year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation) as well as 5 plus years of flight control and dynamics experience.

    Responsibilities of the Flight Control Systems Engineer

    Design and test Servo-Hydraulic flight control actuators for fly-by-wire aircraft platform.
    System design, requirements management, systems specifications, interface management, system safety assessment, verification and validation testing, aircraft flight test, and aircraft/system qualification and certification.
    Capture aircraft-level, system-level, and equipment-level requirements, in addition to associated validation evidence using IBM Rational DOORS in accordance with substantiated monitor design details.
    Define primary and secondary Flight Control System schematics and architecture.
    Perform clean sheet component layouts for Flight Control Systems in support of schematic architecture.
    Perform kinematic studies and system performance analysis for powered Flight Control Systems.
    Have the ability to generate Flight Controls certification documents in support of design and qualification requirements.
    Implement design solutions optimized for cost and weight.
    Serves as a primary interface within the Flight Control Systems group to ensure effective communication, coordination and timely completion of project milestones.
    Leads or participates in design and development reviews with management and internal customers, deliver technical presentations effectively to a diverse and demanding audience.
    Investigate and disposition production line build issues and be familiar with Material Review Board processes.


    Requirements

    Possess a fundamental understanding of aircraft system development principles, including SAE ARP4754A, SAE ARP4761.
    4 year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation).
    5 plus years of flight control and dynamics experience.
     
    Job Location: Japan
    Input Date: 09/06/2019
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Miguel Calderon
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    Flight Control Systems Engineer

    Description:
    We are seeking a Flight Control Systems engineer to fill an opening for a company located in Nagoya, Japan. Interested candidates should have a 4 year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation) as well as 5 plus years of flight control and dynamics experience.

    Responsibilities of the Flight Control Systems Engineer

    Design and test Servo-Hydraulic flight control actuators for fly-by-wire aircraft platform.
    System design, requirements management, systems specifications, interface management, system safety assessment, verification and validation testing, aircraft flight test, and aircraft/system qualification and certification.
    Capture aircraft-level, system-level, and equipment-level requirements, in addition to associated validation evidence using IBM Rational DOORS in accordance with substantiated monitor design details.
    Define primary and secondary Flight Control System schematics and architecture.
    Perform clean sheet component layouts for Flight Control Systems in support of schematic architecture.
    Perform kinematic studies and system performance analysis for powered Flight Control Systems.
    Have the ability to generate Flight Controls certification documents in support of design and qualification requirements.
    Implement design solutions optimized for cost and weight.
    Serves as a primary interface within the Flight Control Systems group to ensure effective communication, coordination and timely completion of project milestones.
    Leads or participates in design and development reviews with management and internal customers, deliver technical presentations effectively to a diverse and demanding audience.
    Investigate and disposition production line build issues and be familiar with Material Review Board processes.


    Requirements

    Possess a fundamental understanding of aircraft system development principles, including SAE ARP4754A, SAE ARP4761.
    4 year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation).
    5 plus years of flight control and dynamics experience.
     
    Job Location: Japan
    Input Date: 11/14/2019
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Miguel Calderon
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Email: Mcalderon@velocity-cs.com
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Control Systems Engineer

    Description:
    We are seeking a Flight Control Systems engineer to fill an opening for a company located in Nagoya, Japan. Interested candidates should have a 4 year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation) as well as 5 plus years of flight control and dynamics experience.

    Responsibilities of the Flight Control Systems Engineer

    Design and test Servo-Hydraulic flight control actuators for fly-by-wire aircraft platform.
    System design, requirements management, systems specifications, interface management, system safety assessment, verification and validation testing, aircraft flight test, and aircraft/system qualification and certification.
    Capture aircraft-level, system-level, and equipment-level requirements, in addition to associated validation evidence using IBM Rational DOORS in accordance with substantiated monitor design details.
    Define primary and secondary Flight Control System schematics and architecture.
    Perform clean sheet component layouts for Flight Control Systems in support of schematic architecture.
    Perform kinematic studies and system performance analysis for powered Flight Control Systems.
    Have the ability to generate Flight Controls certification documents in support of design and qualification requirements.
    Implement design solutions optimized for cost and weight.
    Serves as a primary interface within the Flight Control Systems group to ensure effective communication, coordination and timely completion of project milestones.
    Leads or participates in design and development reviews with management and internal customers, deliver technical presentations effectively to a diverse and demanding audience.
    Investigate and disposition production line build issues and be familiar with Material Review Board processes.

    Requirements of the Flight Control Systems Engineer

    Possess a fundamental understanding of aircraft system development principles, including SAE ARP4754A, SAE ARP4761.
    4 year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation).
    5 plus years of flight control and dynamics experience.
     
    Job Location: Japan
    Duration: 2 Years
    Start Date: ASAP
    Input Date: 10/18/2019
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Miguel Calderon
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    Flight Controls

    Description:
    On any given day you might:
    • Develop air data systems design, architecture and support product plan development, including qualification and certification plans
    • Provide subject matter expert level technical leadership, mentoring and guidance on both practical and theoretical aspects of air data systems
    • Define requirements for the air data systems to ensure compliance with regulations and customer requirements
    • Research new air data concepts and technologies that fit the Aerion technology roadmap
    • Provide validation and verification of air data systems requirements
    We're looking for someone who has:
    • Bachelor’s Degree in relevant engineering area, with a Master’s degree in a technical and/or management specialty preferred
    • 10+ years of deep, hands-on experience in air data and avionics systems development, design and testing in a Military, Commercial, or business aircraft development program
    • 8+ years of demonstrated experience specific to air data systems, air data technical principles and technologies, and managing system suppliers as the technical point of contact
    • In-depth and current knowledge of Part 25 regulatory requirements, including air data specific certification requirements (e.g. RVSM)
    • Experience and expertise in the development of commercial and/or high-end business jets strongly desired, including flight test experience
    • Recent experience in developing air data, avionics and other aircraft systems, such as Automatic Flight Control System (AFCS), from concept through certification strongly desired
    • Optical air data systems experience desired
    • Demonstrated ability to understand & define requirements, generate architecture, and achieve compliance
    We want to build a company around people who are:
    • Highly self-motivated with a strong bias for action
    • Effective at nurturing strong professional relationships
    • Committed to fostering a culture of empowerment & creativity
    We want to build a team around people who are:
    • Highly self-motivated with a strong bias for action
    • Effective at nurturing strong professional relationships
    • Committed to fostering a culture of empowerment & creativity
    Let's Build a Company Together
    We're looking for people from scrappy startups, established corporations, and everything in between. Bring your ideas and experiences, be ready to innovate and learn, and together we'll revolutionize the aerospace industry!
     
    Job Number: 1
    Job Location: Reno, NV
    Per Diem: Split
    Overtime: Possible
    Input Date: 10/15/2019
    Last Updated: 11/18/2019
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Tara Gilbert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Email: tara.gilbert@thestructurescompany.com
    Website: www.thestructurescompany.com

    Air Data Systems Engineer

    Description:
    • Develop air data systems design, architecture and support product plan development, including qualification and certification plans
    • Provide subject matter expert level technical leadership, mentoring and guidance on both practical and theoretical aspects of air data systems
    • Define requirements for the air data systems to ensure compliance with regulations and customer requirements
    • Research new air data concepts and technologies that fit the technology roadmap
    • Provide validation and verification of air data systems requirements


    We're looking for someone who has:
    • Bachelor’s Degree in relevant engineering area, with a Master’s degree in a technical and/or management specialty preferred
    • 10+ years of deep, hands-on experience in air data and avionics systems development, design and testing in a Military, Commercial, or business aircraft development program
    • 8+ years of demonstrated experience specific to air data systems, air data technical principles and technologies, and managing system suppliers as the technical point of contact
    • In-depth and current knowledge of Part 25 regulatory requirements, including air data specific certification requirements (e.g. RVSM)
    • Experience and expertise in the development of commercial and/or high-end business jets strongly desired, including flight test experience
    • Recent experience in developing air data, avionics and other aircraft systems, such as Automatic Flight Control System (AFCS), from concept through certification strongly desired
    • Optical air data systems experience desired
    • Demonstrated ability to understand & define requirements, generate architecture, and achieve compliance


    We want to build a company around people who are:
    • Highly self-motivated with a strong bias for action
    • Effective at nurturing strong professional relationships
    • Committed to fostering a culture of empowerment & creativity

    The Structures Company is AA/EOE.
     
    Job Number: 324
    Job Location: Reno, NV
    Rate: OPEN - **DOE**
    Per Diem: Yes
    Overtime: Possible
    Duration: 6+ Months
    Start Date: ASAP
    Input Date: 10/07/2019
    Last Updated: 11/18/2019
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Email: debbieaubert@thestructurescompany.com
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Controls Systems Engineer - China

    Description:
    Our Aerospace Client based in China is looking for additional Engineering Support. They require a Flight Controls Systems Engineer with extensive systems safety experience. 

    This is an exciting opportunity to work in East Asia, contributing to the success of our Client's Aircraft Program. Excellent salary / remuneration for suitably skilled and qualified candidates.

    Responsibilities:

    The selected candidate will take charge of FCS system assessment for a new aircraft project / program.
    They will be tasked with Improving the FCS department's capability for system safety assessments.

    Skills/ Qualifications / Experience Sought:

    Background working for Aerospace Companies in similar roles.

    Degree Qualified.
    More than 5-year experience on FCS safety assessment is required.
    Fluent in English language with good communication skills.

    Team Player.

    Candidates should be prepared to live and work in Shanghai on a fixed term contract basis for 2-3 years.
     
    Job Number: BH-52-1
    Job Location: Shanghai, China
    Rate: Good Package / Rate - Negotiable
    Per Diem: --
    Overtime: --
    Duration: 2-3 years
    Start Date: 07/18/2019
    Input Date: 07/19/2019
    Last Updated: 09/16/2019
    Firm Name: STRONGFIELD TECHNOLOGIES USA INC
    Attention: Adrian Medhurst
    Address: 5000 BIRCH ST STE 3000
    City, State: NEWPORT BEACH, CA 92660
    Website: www.strongfield.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Deck Design Engineer

    Description:
    Here's the Deal
    As the Flight Deck Design Engineer you will report directly to the Flight Deck Manager and will be responsible for the design and integration of the flight deck for a business jet.

    On any given day you might:
    • Design and develop the Flight Deck with input from HMI, interior supplier, Flight Controls IPT and the Avionics IPT
    • Embody the Flight Deck concept into the 3D Digital Mock-Up (DMU)
    • Model components and place them in the DMU
    • Add supplier furnished 3D models into the DMU
    • Model the Flight Deck instrument panels
    • Utilize 3D Human Builder programs to simulate crew interactions in the 3d DMU Flight Deck
    • Provide direct input to the Flight Deck design and Avionics engineers
    • Assist in the creation of the Flight Deck mock-up
    • Assist in the creation of the Flight Deck Simulator
    • Ensure compliance with regulations and customer requirements
    • Interact directly with suppliers
    • Work with strict configuration control requirements Report Status
    • Provide support for engineering, certification, and flight test departments from concept to product certification
    • Foster a culture that inspires high levels of performance and employee retention

    We're looking for someone who has:
    • Bachelor’s degree in relevant field required.
    • 5+ years of experience within the Avionics discipline.
    • Experience working on aircraft development programs
    • Expert level of competency using CATIA V5
    • Working knowledge of PLM tools
    • Knowledge of HMI design and integration
    • Clear understanding of all aspects of Flight Deck development
    • An understanding of Systems Engineering
    • An understanding of anthropometrics, pilot psychology, Pilot workload, HMI and flight deck equipment interactions
    • Familiarity with Part 25 Regulations especially 1302, 1309, 1322, ARP 4754A, ARP 6049494, Mil-STD 1472 and other relevant industry standards is preferred.
    • Experience with Flight Deck mock-up and Simulator design

    We want to build a company around people who are:
    • Highly self-motivated with a strong bias for action
    • Effective at nurturing strong professional relationships
    • Committed to fostering a culture of empowerment & creativity
     
    Job Number: 42-030
    Job Location: Reno, NV
    Rate: D.O.E.
    Per Diem: YES
    Overtime: Possible
    Duration: 1+ Year
    Start Date: ASAP
    Input Date: 09/26/2019
    Last Updated: 10/02/2019
    Firm Name: PRECISION PERSONNEL INC
    Attention: Brandon
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Deck Design Engineer

    Description:
    • Design and develop the new aircraft Flight Deck with input from HMI, interior supplier, Flight Controls IPT and the Avionics IPT
    • Embody the new aircraft Flight Deck concept into the 3D Digital Mock-Up (DMU)
    • Model components and place them in the DMU
    • Add supplier furnished 3D models into the DMU
    • Model the Flight Deck instrument panels
    • Utilize 3D Human Builder programs to simulate crew interactions in the 3d DMU Flight Deck
    • Provide direct input to the Flight Deck design and Avionics engineers
    • Assist in the creation of the new aircraft Flight Deck mock-up
    • Assist in the creation of the new aircraft Flight Deck Simulator
    • Ensure compliance with regulations and customer requirements
    • Interact directly with suppliers
    • Work with strict configuration control requirements
    • Report Status
    • Provide support for engineering, certification, and flight test departments from concept to product certification
    • Foster a culture that inspires high levels of performance and employee retention
    We're looking for someone who has:
    • Bachelor’s degree in relevant field required.
    • 5+ years of experience within the Avionics discipline.
    • Experience working on aircraft development programs
    • Expert level of competency using CATIA V5
    • Working knowledge of PLM tools
    • Knowledge of HMI design and integration
    • Clear understanding of all aspects of Flight Deck development
    • An understanding of Systems Engineering
    • An understanding of anthropometrics, pilot psychology, Pilot workload, HMI and flight deck equipment interactions
    • Familiarity with Part 25 Regulations especially 1302, 1309, 1322, ARP 4754A, ARP 6049494, Mil-STD 1472 and other relevant industry standards is preferred.
    • Experience with Flight Deck mock-up and Simulator design
     
    Job Location: Reno, NV
    Rate: DOE
    Per Diem: Possible
    Overtime: Possible
    Duration: Temp to Perm
    Start Date: ASAP
    Input Date: 08/09/2019
    Last Updated: 11/13/2019
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Tara Gilbert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    Flight Deck Design Engineer - Avionics

    Description:
    • Design and develop the new aircraft Flight Deck with input from HMI, interior supplier, Flight Controls IPT and the Avionics IPT
    • Embody the new aircraft Flight Deck concept into the 3D Digital Mock-Up (DMU)
    • Model components and place them in the DMU
    • Add supplier furnished 3D models into the DMU
    • Model the Flight Deck instrument panels
    • Utilize 3D Human Builder programs to simulate crew interactions in the 3d DMU Flight Deck
    • Provide direct input to the Flight Deck design and Avionics engineers
    • Assist in the creation of the new aircraft Flight Deck mock-up
    • Assist in the creation of the new aircraft Flight Deck Simulator
    • Ensure compliance with regulations and customer requirements
    • Interact directly with suppliers
    • Work with strict configuration control requirements
    • Report Status
    • Provide support for engineering, certification, and flight test departments from concept to product certification
    • Foster a culture that inspires high levels of performance and employee retention


    We're looking for someone who has:
    • Bachelor’s degree in relevant field required.
    • 5+ years of experience within the Avionics discipline.
    • Experience working on aircraft development programs
    • Expert level of competency using CATIA V5
    • Working knowledge of PLM tools
    • Knowledge of HMI design and integration
    • Clear understanding of all aspects of Flight Deck development
    • An understanding of Systems Engineering
    • An understanding of anthropometrics, pilot psychology, Pilot workload, HMI and flight deck equipment interactions
    • Familiarity with Part 25 Regulations especially 1302, 1309, 1322, ARP 4754A, ARP 6049494, Mil-STD 1472 and other relevant industry standards is preferred.
    • Experience with Flight Deck mock-up and Simulator design




    The Structures Company is an AA/EOE.
     
    Job Number: 330
    Job Location: Reno, NV
    Rate: ***DOE***
    Per Diem: Yes
    Overtime: Possible
    Duration: 6 Month Contract to Hire
    Start Date: ASAP
    Input Date: 09/18/2019
    Last Updated: 11/18/2019
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Email: debbieaubert@thestructurescompany.com
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Engineer

    Description:
    Flight Test Engineer

    Location: Seattle, WA
    Duration: 6 Months

    Job Description:
    Multiple positions for Flight Test Engineers are available in the Puget Sound area. Positions will support multiple aircraft test programs (e.g. 737Max, 777-9, Eco Demonstrator).

    Duties will include:
    - Test planning (e.g. preparation of test plans, data plans and instrumentation, aircraft configuration management and payload planning, sortie planning)
    - Test Conduct Support (e.g. participation as part of airborne test crew, assessing test condition acceptability, operation of test equipment)
    - Post-test activities (e.g. documentation of test results).

    Education / Experience:
    ABET accredited engineering degree / At least 5 years of flight test engineering experience.

    Skill Code: 689-Flight/Mission/System Test
     
    Job Number: 19-10082
    Job Location: Seattle, WA
    Per Diem: split
    Overtime: possible
    Duration: 6 months
    Start Date: 9/30/19
    Input Date: 08/22/2019
    Last Updated: 08/28/2019
    Firm Name: ICONMA LLC
    Attention: Constance Whitcomb
    Address: 4620 E 53RD ST
    City, State: DAVENPORT, IA 52807
    Phone: 312/502-4795
    Website: www.iconma.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Engineer

    Description:
    Flight Test Engineer

    Location: Seattle, WA
    Duration: 6 Months

    Job Description:
    Multiple positions for Flight Test Engineers are available in the Puget Sound area. Positions will support multiple aircraft test programs (e.g. 737Max, 777-9, Eco Demonstrator).

    Duties will include:
    - Test planning (e.g. preparation of test plans, data plans and instrumentation, aircraft configuration management and payload planning, sortie planning)
    - Test Conduct Support (e.g. participation as part of airborne test crew, assessing test condition acceptability, operation of test equipment)
    - Post-test activities (e.g. documentation of test results).

    Education / Experience:
    ABET accredited engineering degree / At least 5 years of flight test engineering experience.

    Skill Code: 689-Flight/Mission/System Test
     
    Job Location: Seattle, WA
    Rate: Open
    Per Diem: Split
    Overtime: Possible
    Duration: 6 months
    Start Date: ASAP
    Input Date: 07/24/2019
    Last Updated: 08/28/2019
    Firm Name: ICONMA LLC
    Attention: Mohamed Zoheb
    Address: 850 STEPHENSON HWY STE 612
    City, State: TROY, MI 48083
    Phone: 248/602-3856
    Website: iconma.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Fuel Systems Design Engineer

    Description:
    The Engineer Fuel System Designer is responsible for the design of the fuel system installations and related system integration. This designer will join an established design team to execute design changes for the HA-420 aircraft related to product improvements, cost savings, weight savings and other minor and major change projects. Although the position will reside in the fuel systems engineering team, the role will also involve working on propulsion system design activities as required by the overall team workload.

    Duties and Responsibilities:
    • The primary role of this position will be to create design packages that include 3-D models (in Catia) as well as 2-D drawings. This role will encompass the execution of the design from the concept phase through to drawing release
    • This role will interface with the engineers within the department as well as other departments and organizations in the company during the development of the design package
    • The ideal candidate should be able to work well with the senior designers within the team but also be able to be self-sufficient and able to manage


    Education, Work Experience, Certification and/or Licensure:
    • Bachelor degree in an engineering related discipline
    • Minimum of 3 years of previous design experience


    Knowledge, Skills and Abilities:
    • Proficient in Catia V5
    • Familiar with Microsoft Office Products
    • Familiar with FAR Part 23 or Part 25
    • Familiar with Industry standards


    The Structures Company is an AA/EOE.
     
    Job Number: 298
    Job Location: NC
    Rate: OPEN - **DOE**
    Per Diem: Yes
    Overtime: Yes
    Duration: 10+ Months
    Start Date: ASAP
    Input Date: 07/15/2019
    Last Updated: 10/09/2019
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    Fuel Systems Designer

    Description:





    PDS Tech is currently recruiting for an Fuel Systems Design Engineer in Greensboro, NC.

    General Summary:


    The Engineer Fuel System Designer is responsible for the design of the fuel system installations and related system integration.  This designer will join an established design team to execute design changes for aircraft related to product improvements, cost savings, weight savings and other minor and major change projects. Although the position will reside in the fuel systems engineering team, the role will also involve working on propulsion system design activities as required by the overall team workload.  

    Duties and Responsibilities:
    • The primary role of this position will be to create design packages that include 3-D models (in Catia) as well as 2-D drawings. This role will encompass the execution of the design from the concept phase through to drawing release
    • This role will interface with the engineers within the department as well as other departments and organizations in the company during the development of the design package 
    • The ideal candidate should be able to work well with the senior designers within the team but also be able to be self-sufficient and able to manage task execution to ensure on-time and on-target completion

     
     






    Qualifications
     
    Education, Work Experience, Certification and/or Licensure:
    • Bachelor’s degree in an engineering related discipline
    • Minimum of 3 years of previous design experience 

     
    Knowledge, Skills and Abilities:

    • Proficient in CATIA V5
    • Familiar with Microsoft Office Products
    • Familiar with FAR Part 23 or Part 25
    • Familiar with Industry standards

     
    Job Number: 1910096747
    Job Location: Greensboro, NC
    Duration: 12 months
    Input Date: 04/02/2019
    Last Updated: 11/18/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Thomas Levitt
    Address: 11828 W CENTRAL STE 100
    City, State: WICHITA, KS 67212-5129
    Phone: 316/729-1800
    800 Phone: 800/333-8644
    Fax Phone: 316/729-1857
    Email: cecjwichita@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002r65jQAA&URLSource=cjhunter

    Hand Mill Operator

    Description:
    Chipton-Ross is seeking a Hand Mill Operator for an opportunity in Huntington Beach, CA

    RESPONSIBILITIES:
    Assembles aircraft interior electrical components, harnesses, connectors, etc. using engineering drawings, company and customer specifications.
    Assemble wire harnesses, electrical control modules, electrical connectors and other electrical assemblies or components, using assembly and tool drawings, wiring diagrams, customer and company specifications. Intricate tasks include stripping, crimping, and soldering of wires, use of hand tools and manually operated machines, use of electrical equipment such as heat guns and soldering irons. Confer with quality control inspectors and electrical engineers to resolve assembly problems, incomplete documentation and data interpretation.
    " Adheres to company specifications, work instructions, engineering prints and work orders.
    " Documents the materials used in the process to maintain traceability.
    " Assembles wire harness, electrical control modules, electrical connectors and other electrical assemblies or components, using assembly and tooling drawings, wiring diagrams, customer and company specifications.
    " Performs intricate tasks including stripping, crimping and soldering of wires.
    " Uses hand tools and manually operated machines, uses electrical equipment such as heat guns and soldering irons.
    " Confers with Quality Inspectors, Electrical Engineers and Production Manager to resolve assembly problems, incomplete documentation and data interpretation.
    " Safely handles various regulated materials used in the process.
    " General Notes:
    o Must carefully handle raw material and manufactured parts to ensure the integrity and quality is not compromised by handling.
    o All employees have an affirmative duty to protect and maintain the confidentiality of C&D products.
    o As business conditions change it is necessary that all employees productively react and handle other essential tasks as assigned now or in the future.
    o Tasks may vary slightly based on products produced at division.

    REQUIRED EXPERIENCE:
    0-3 years.
    Other Skills: The ability to read and write at a level necessary for successful job performance.
    Entry level.

    EDUCATION:
    Accredited High School Diploma/GED

    WORK HOURS:
    M-F 1st 6am -2:30pm
    Full-Time/First Shift

     
    Job Number: 179855
    Job Location: Huntington Beach, CA
    Rate: Up to $13.25 DOE
    Input Date: 06/12/2019
    Last Updated: 11/18/2019
    Firm Name: CHIPTON ROSS
    Attention: Cody Reposa
    Address: 420 CULVER BLVD
    City, State: PLAYA DEL REY, CA 90293
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: creposa@chiptonross.com
    Website: www.chiptonross.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Human Factors Engineer

    Description:
    Summary
    As the Human Factors Engineer you will report directly to the Flight Deck Manager and will be responsible for the technical aspects of the Human Machine Interface (HMI) design, integration and testing of the flight deck for the business jet.

    On any given day you might:
    • Develop the HMI design and architecture of the Flight Deck
    • Integrate the Flight Deck design with the interior supplier, Flight Controls IPT and the Avionics IPT
    • Develop product plans that include certification plans
    • Provide subject matter expert level technical leadership, mentoring, and guidance on both practical and theoretical aspects of HMI engineering
    • Provide direct input to the Flight Deck design and Avionics engineers
    • Assist in the creation of the Flight Deck mock-up
    • Assist in the creation of the Flight Deck Simulator
    • Ensure compliance with regulations and customer requirements interact directly with suppliers
    • Define requirements and processes
    • Validate and verify of requirements
    • System test and certification
    • Report Status
    • Provide expert level guidance on both practical and theoretical aspects of the Flight Deck design
    • Provide support for engineering, certification, and flight test departments from concept to product certification
    • Foster a culture that inspires high levels of performance and employee retention

    We're looking for someone who has:
    • Bachelor’s degree in relevant field required.
    • 5+ years of experience within the Avionics discipline.
    • Experience working on aircraft development programs
    • HMI design and integration
    • Clear understanding of all aspects of Flight Deck development
    • Good understanding of Systems Engineering
    • Good understanding of anthropometrics, pilot psychology, Pilot workload and flight deck equipment interactions
    • Demonstrated success developing processes
    • Familiarity with Part 25 Regulations especially 1302, 1309, 1322, ARP 4754A, ARP 60494, Mil-STD 1472 and other relevant industry standards is preferred.

    We want to build a company around people who are:
    • Highly self-motivated with a strong bias for action
    • Effective at nurturing strong professional relationships
    • Committed to fostering a culture of empowerment & creativity
     
    Job Number: 42-032
    Job Location: Reno, NV
    Rate: $62.50-$100
    Per Diem: YES
    Overtime: Possible
    Duration: 1+ Year
    Start Date: ASAP
    Input Date: 09/26/2019
    Last Updated: 10/02/2019
    Firm Name: PRECISION PERSONNEL INC
    Attention: Brandon
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Human Factors Engineer

    Description:
    As the Human Factors Engineer you will report directly to the Flight Deck Manager and will be responsible for the technical aspects of the Human Machine Interface (HMI) design, integration and testing of the flight deck for the business jet.
    On any given day you might:


    • Develop the HMI design and architecture of the new aircraft Flight Deck
    • Integrate the Flight Deck design with the interior supplier, Flight Controls IPT and the Avionics IPT
    • Develop product plans that include certification plans
    • Provide subject matter expert level technical leadership, mentoring, and guidance on both practical and theoretical aspects of HMI engineering
    • Provide direct input to the Flight Deck design and Avionics engineers
    • Assist in the creation of the new aircraft Flight Deck mock-up
    • Assist in the creation of the new aircraft Flight Deck Simulator
    • Ensure compliance with regulations and customer requirements
    • interact directly with suppliers
    • Define requirements and processes
    • Validate and verify of requirements
    • System test and certification
    • Report Status
    • Provide expert level guidance on both practical and theoretical aspects of the Flight Deck design
    • Provide support for engineering, certification, and flight test departments from concept to product certification
    • Foster a culture that inspires high levels of performance and employee retention


    We're looking for someone who has:
    • Bachelor’s degree in relevant field required.
    • 5+ years of experience within the Avionics discipline.
    • Experience working on aircraft development programs
    • HMI design and integration
    • Clear understanding of all aspects of Flight Deck development
    • Good understanding of Systems Engineering
    • Good understanding of anthropometrics, pilot psychology, Pilot workload and flight deck equipment interactions
    • Demonstrated success developing processes
    • Familiarity with Part 25 Regulations especially 1302, 1309, 1322, ARP 4754A, ARP 60494, Mil-STD 1472 and other relevant industry standards is preferred.




    The Structures Company is an AA/EOE.
     
    Job Number: 334
    Job Location: Reno, NV
    Rate: ***DOE***
    Per Diem: Yes
    Duration: 12-18 Months, Could Go Direct
    Start Date: ASAP
    Input Date: 09/13/2019
    Last Updated: 10/15/2019
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Hydraulic Systems Engineer

    Description:
    • Looking for a Hydraulic Systems Engineer.
    • Someone with experience laying out the entire Hydraulic system in an aircraft.
    • Experience with vendor selection, layout of entire system, requirements management.
    • Must have a degree.
    • Experience at Bombardier, Embraer, or Gulfstream is ideal

    The Structures Company is an AA/EOE.
     
    Job Number: 329
    Job Location: NC
    Rate: $75/Hr. **DOE**
    Per Diem: Yes
    Overtime: Yes
    Duration: 12+ Months
    Start Date: ASAP
    Input Date: 10/09/2019
    Last Updated: 11/13/2019
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Industrial Engineering Expert - Aerospace - China

    Description:
    Our client, the manufacturing division of a major Chinese aircraft company, are seeking an Industrial Engineering Expert to provide expert advice to its various manufacturing programs. This is based at the modern facility in Shanghai. 

    Job Description

    ·Responsible for optimizing the management process and platform of man-hour and and establishing a man-hour control system which can adapt the rapid production environment of civil aircraft.

    ·Responsible for establishing the man-hour standard for part manufacturing and assembling and optimizing the electronic platform of the man-hour standard.

    ·Responsible for realizing the optimal resource allocation of the civil aircraft assembling line by layout adjustment, workflow optimization, ergonomics optimization, etc.

    ·Responsible for establishing the optimal civil aircraft lean production system and improving the level of lean production management.

    ·Assist in the training of the team of industrial engineering.

    Qualifications & Experience

    ·Bachelor degree or above, familiar with IE knowledge, master lean production theory, more than 10 years of relevant work experience is preferred, including within the aerospace industry.

    ·Experienced in man-hour management or man-hour standard establishment of large projects.

    ·Experienced in optimization of production site management of large projects.

    ·Excellent communication ability, organizational coordination skill, positive attitude and high efficiency.

    ·Experienced in aircraft OEMs (e.g. Airbus, Boeing, Bombardier) or other leading aircraft companies is preferred.

    This position will be on a fixed term employment contract basis, with an initial duration of 2-3 years and extendable beyond this. It comes with a generous salary with additional tax-free allowances for accommodation, transport, travel home and healthcare.
     
    Job Number: BH-70-1
    Job Location: Shanghai, China
    Rate: Good Package / Rate - Negotiable
    Per Diem: --
    Overtime: --
    Start Date: 07/17/2019
    Input Date: 07/18/2019
    Last Updated: 09/16/2019
    Firm Name: STRONGFIELD TECHNOLOGIES USA INC
    Attention: Adrian Medhurst
    Address: 5000 BIRCH ST STE 3000
    City, State: NEWPORT BEACH, CA 92660
    Website: www.strongfield.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Intelligent Manufacturing Expert - Aerospace - China

    Description:
    Intelligent Manufacturing Expert - Aerospace - China

    Our client, the manufacturing division of a major Chinese aircraft company, are seeking an Intelligent Manufacturing Expert to provide expert advice to its various manufacturing programs. This is based at the modern facility in Shanghai. 

    Job Description

    ·Responsible for digitalizational intelligent manufacturing application planning, AI algorighm development, system testing, debugging, maintaining, technical guidance etc.;

    ·Analyze the trend of intelligent technology, involving intelligent manufacturing software and hardware solutions;

    ·Responsible for the implementation of enterprise intelligent manufacturing upgrading and management of the production line equipment life cycle;

    ·Follow up the project progress in time, lead the team to solve the problems that related to site production line, ensure the project is completed on time;

    ·Responsible for intelligent manufacturing information management and programing.

    Qualifications & Experience

    ·More than 10 years of relevant major work experience in intelligent manufacturing and automation equipment development;

    ·Familiar with R&D, production, management process in the aeronautical field;

    ·Familiar with organizational intelligent manufacturing related to equipmental software, hardware technology and organaitional information management software;

    ·Proficiently program the equipment control system of intelligent manufacturing;

    ·Lead organization intelligent manufacturing, experienced in intelligent manufacturing and industry robot are preferred;

    ·Familiar with information system or software development, programmer who are experienced in programming and software developing are preferred;

    ·Overseas working experience is preferred.

    This position will be on a fixed term employment contract basis, with an initial duration of 2-3 years and extendable beyond this. It comes with a generous salary with additional tax-free allowances for accommodation, transport, travel home and healthcare.
     
    Job Number: BH-69-2
    Job Location: Shanghai, China
    Rate: Good Package / Rate - Negotiable
    Per Diem: --
    Overtime: --
    Start Date: 07/17/2019
    Input Date: 07/18/2019
    Last Updated: 09/16/2019
    Firm Name: STRONGFIELD TECHNOLOGIES USA INC
    Attention: Adrian Medhurst
    Address: 5000 BIRCH ST STE 3000
    City, State: NEWPORT BEACH, CA 92660
    Website: www.strongfield.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Interior Stress Analyst

    Description:
    The candidate will be performing structural analysis of aircraft interior monuments using FEA and classical hand analysis.

    Responsibilities will include both the analysis and certification documentation. The ideal candidate will have experience in the following:
    - Experience performing structural analysis on aircraft Interior Furnishings
    - Use of finite element analysis for both primary and secondary structures
    - MRB experience for both Primary and Secondary Structures
    - Working with company delegated structural AR's in an ODA environment in support of new and unique STC certification of aircraft installations
    - Working knowledge of FAR part 25 certification requirements
    - A good understanding of a fast-paced completion-style environment
    - Working knowledge of FEMAP is required.
    - BS required.
     
    Job Location: Savannah, GA
    Rate: $75/hr
    Per Diem: Yes
    Overtime: Possible
    Input Date: 07/06/2019
    Last Updated: 10/15/2019
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Tara Gilbert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    Japanese Outsourcing Manager

    Description:
    We are currently seeking an experienced Project Management professional with ample vendor/supplier knowledge to fill an opening for a company here in Nagoya, Japan. Interested candidates should have 10 to 15 years of experience working with Aircraft or Automotive OEM as well as direct vendor management and project management experience.

    Responsibilities of the Japanese Outsourcing Manager

    Provide leadership and problem solving to improve Japan based vendors performance and drive sustainable operations and deliver key business metrics for the outsourcing program.
    Analyze data to identify solutions to challenges, drive business decisions and communicate them clearly to partners and stakeholders at all levels.
    Lead regular business reviews, identify gaps and engage with partners on improvement plans to streamline Japan based Outsourcing operations.
    Manage programs for Japan and Group company vendor expansion and drive medium to long term strategies.
    Manage vendor capacity through continuous engagement with vendor partners to assess active headcount, recruitment pipelines, and ongoing demand for resources from the lines of business.
    Work closely with Outsourcing strategy manager, Contract Administration, Global Outsourcing Manager to develop and implement standard process and procedures to apply to the entire outsourcing activities for the company.
    Lead negotiation plan development including mapping out detailed approaches, fallback positions, and acceptable terms and conditions.

    Requirements of the Japanese Outsourcing Manager

    10 to 15 years of experience working with Aircraft or Automotive OEMs.
    Ability to read and speak English and Japanese fluently and possess Japanese and global business culture understanding.
    Minimum Bachelor’s degree, plus MBA, PMP or other certifications from accredited institutions preferred.
    3 years of experience working with outsourcing matters with a focus on; direct vendor management, setting and driving vendor strategy, process improvement, contracting, commercial negotiations, in-house sourcing in Japan market.
    Experience managing global procurement responsibilities, using a strategic sourcing methodology, including: opportunity analysis and identification, supplier selection, risk and compliance evaluation, contract negotiation and financial analysis.
    Ability to both develop strategic sourcing plans and dive deep in contract details with a solid understanding of how contracts are structured.
    Experience with supplier report cards and supplier management.
     
    Job Location: Japan
    Duration: 2 Years
    Start Date: ASAP
    Input Date: 11/14/2019
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Susan McGlinsey
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Email: smcglinsey@velocity-cs.com
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Jr. Flight Controls Design Engineer

    Description:
    Design Engineer responsible for the conceptual design and production engineering of Aircraft Flight Control Systems. The candidate will be responsible for conceptual layout, detailed design and aircraft production & in-service design and modification.


    Duties and Responsibilities:
    • Generates Engineering Models and Drawings utilizing CATIA Version 5.
    • Performs trade studies for Flight Control Systems to identify optimal engineering solution.
    • Perform clean sheet component layouts for Flight Control Systems in support of schematic architecture
    • Perform kinematic studies and system performance analysis for powered and unpowered Flight Control Systems
    • Utilizes drafting and Geometrical Dimensioning & Tolerancing knowledge to optimize part design for cost and functionality.
    • Collaborates with the Integrated Product Team to resolve cross functional issues.
    • Implements Industry best engineering practices (design for manufacturing, design for reliability and design for maintainability).
    • Have the ability to understand and apply certification requirements.
    • Have the ability to generate Flight Controls certification documents in support of design and qualification requirements.
    • Implement design solutions optimized for cost and weight.
    • Manages task execution to ensure on-time and on-target completion.
    • Searches for problem root cause and develop corrective action plans and solutions.
    • Participates in design / development reviews with management and internal customers. The candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience.
    • Investigate and disposition production line build issues. Must have a working knowledge with Material Review Board processes.


    Education, Work Experience, Certification and/or Licensure:
    • BS in Mechanical Engineering with a minimum of 4 years directly related experience required
    • Some Travel will be required


    Knowledge, Skills and Abilities:
    • Proficient in use of CATIA Version 5.
    • Proficient in use of Kinematic function within CATIA Version 5.
    • Advanced knowledge of drafting rules.
    • Advanced knowledge of Geometrical Dimensioning and Tolerancing.
    • Proficient in Microsoft Office Products.
    • Functional knowledge of Team Center of similar Product Life Cycle tools
    • Familiar with FAR Part 23 or Part 25.
    • Functional knowledge of SAP




    The Structures Company is an AA/EOE.
     
    Job Number: 299
    Job Location: NC
    Rate: $52/Hr.
    Per Diem: Yes
    Overtime: Yes
    Duration: 10+ Months
    Start Date: ASAP
    Input Date: 04/22/2019
    Last Updated: 09/12/2019
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    Logistics Systems Engineer

    Description:
    Location: Fort Worth, TX
    Rate: $67.41/HR
    Duration: 15 month contract
    Overtime: Possible (x1.5)
    Per Diem Split: Yes (if eligible)

    ****MUST be a U.S. Citizen****
    ****MUST have a Bachelor's Degree****
    ****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

    Job Description:
    1. This position is part of the Systems Engineering organization at our client.
    2. Candidate is needed to fulfill a role in obsolescence management of aircraft components, also known as Diminishing Manufacturing Sources & Material Shortages.
    3. Specifically, tasks will support the F-35 program and involve activities needed to mitigate the effects of obsolescence including last-time buys, lifetime buys, and Bill of Material (BOM) monitoring.
    4. Additional duties will include inventory management and coordination, review and dispositioning of Supplier Data Requirements Lists (SDRLs), generating and briefing Business Case Analyses (BCAs) for parts buys, and developing Contract Data Requirements Lists (CDRLs) to the Customer.
    5. Candidate will be expected to interface