Job Search Results

496 listings were found that matched your search words: Keywords: Aerospace ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2024/03/28 Thursday 04:06PM Pacific Time by ContractJobHunter. )

Listings 1 - 496

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
6 Non-Destructive Test (NDT/NDI) Level II Needed

Description:
Seeking aviation/aircraft non-destructive test (NDT/NDI) Level 2
MUST BE US PERSONS
MUST have successfully completed minimum training requirements defined in NAS 410, ATA 105, or ASNT-SNT-TC-1A for a Level 2 inspector in UT and PT.

• Responsible for accomplishing assigned inspection work on space flight system hardware, assemblies and vehicles.
• Conducts inspections utilizing a variety of NDT methods which may include but are not limited to ultrasonic, penetrant, x-ray, eddy-current, and thermal/infrared and laser shearography.
• Properly utilize NDT test equipment and associated tools to successfully interrogate hardware and structures, make decisions as to their acceptability for continued use and keep abreast of new and advanced test equipment.
• Operate manual and automated NDT equipment.
• Shall be required to document inspection results in both paper and electronic forms as well as complete and sign work records in connection with work performed.
• Inspects parts, sub-assemblies and completed assemblies to the extent necessary to determine, accomplish and approve acceptability in accordance with written procedures.
• Will be required to, but not limited to be working on check aircraft.
• Assist with development of procedures and techniques for non-destructive testing of metallic and composite structures.
• Support training of other NDT personnel using hands-on knowledge from the vehicles via different mediums as appropriate.
• Excellent attendance, ability to work overtime, and other shifts as required.

REQUIREMENTS
• Must have successfully completed minimum training requirements defined in NAS 410, ATA 105, or ASNT-SNT-TC-1A for a Level 2 inspector in UT and PT. Training in other NDT methods is desirable.
• Must have recent, documented hours, working as a NDT inspector and have obtained sufficient experience to be certified in accordance with NAS 410, ATA 105, or ASNT-SNT-TC-1A.
• Must have strong working knowledge of composite aircraft and/or aerospace non-destructive testing processes in composite material.
• Ability to conduct inspections with limited supervision.
• Minimum 5 years aviation/aerospace industry experience desired.
• Excellent computer skills. Skilled in working in Microsoft Office applications.
• Experience on narrow body and/or business jet aircraft preferred.
• Experience with composite aircraft is preferred although not required (commercial or military aerospace application).
• Must display maturity of action and judgment.
• Must be able to work under pressure and thrive in a fast-paced environment.
• Good communication skills.
• Ability to read, interpret, and communicate blueprints, specs, and other technical documents.

Physical and/or Additional Requirements
• Perform physical requirements of the position, including use of inspection hand tools, NDT equipment, lift up to 50 lbs., pass eye examination.
• Willing to work overtime, all shifts, travel and be on-call as necessary.

The Structures Company LLC is an AA/EOE.
 
Job Number: 504
Job Location: Mojave, CA
Rate: **DOE**
Per Diem: Yes
Overtime: Possible
Duration: 8+ Months
Start Date: ASAP
Input Date: 09/29/2021
Last Updated: 02/24/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
6 Quality Inspectors Needed

Description:
Seeking a senior level experienced quality supervisor to join our dynamic team. This role is for a hands-on person with great attention to detail and excellent people skills.

Responsibilities
• Perform inspection and analysis to identify and evaluate the quality of products to design and customer requirements.
• Perform receiving, in-process production, and final assembly inspections and provide objective evidence of results in accordance with QMS requirements.
• Communicate effectively, in both written and verbal formats, with engineering, management and production personnel to convey product acceptance criteria and inspection results.
• Generate Non-Conformance Reports (NCRs) as required within the TIPQA.
• Comply with safety regulations and promote a safe working environment.

Basic Qualifications
• High school diploma or GED required
• Strong knowledge of composites manufacturing required
• A&P License REQUIRED
• Knowledge of AS9100 and other relevant aerospace industry standards.
• Ability to work with Microsoft tools, CATIA, 2D and 3D drawings or computer-generated models or other similar types of engineering data.

• Basic math and technical writing skills.
• Proven hands-on inspection experience in the aerospace industry using a variety of precision measurement tools.
• GD&T comprehension through experience and/or formal training.
• In depth understanding of the inspection techniques and quality issues associated with composites.
• Attention to detail and follow through.
• Ability to communicate effectively with all levels of company personnel.


Suggestions for Education/Certifications

• Bachelor’s Degree in Computer Science or in “STEM” Majors (Science, Technology, Engineering and Math)
• High school diploma or GED required.


Preferred Skills and Experience
Must have knowledge of day-to-day operations of an aerospace production manufacturer facility experience.
Must be able to execute the company’s vision for quality and interact with other leadership throughout the organization.


*The Employer retains the right to change or assign other duties to this position.
Physical and/or Additional Requirements
• Perform physical requirements of the position, including use of inspection hand tools, NDT equipment, lift up to 50 lbs., pass eye examination
• Willing to work overtime, all shifts, travel and be on-call as necessary



The Structures Company LLC is an AA/EOE.
 
Job Number: 505
Job Location: Mojave, CA
Rate: **DOE**
Per Diem: Yes
Overtime: Possible
Duration: 8+ Months
Start Date: ASAP
Input Date: 06/14/2022
Last Updated: 10/07/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
3 Manufacturing Engineer II Needed

Description:
Performs “Manufacturing Engineer II” level assignments of intermediate to high complexity under the general direction of the Manufacturing Engineering Manager. He/she may also assist in product development and production of tooling, fixtures, and machinery. Coordinate with other departments, outside organizations and suppliers to assure that functional requirements are met on time, at the expected quality level and at the lowest cost. The Manufacturing Engineer II level employee also has the ability to review, develop and approve solutions for production problems relating to mechanical systems (fuel, bleed air, cabin pressure, Oxygen and ECS), manufacturing processes and/or tooling. The employee must be highly analytical, innovative and a critical thinker. This may include working from engineering design documents, specifications, prototypes and/or change orders to determine equipment, tooling, materials and methods of manufacture and installation to produce quality products within cost and specification guidelines.

Duties and Responsibilities:
1. Analyze a variety of engineering data to help determine requirements to meet objectives
2. Participate in project teams and may coordinate tasks/procedures with associates in other engineering functions
3. Work on various product and process flow segments of developmental projects
4. Conduct RCCA tests or experiments, record and evaluate data and report findings
5. Responsible for process capability studies, test capability studies, & through-put rates
6. Under the direction of assigned management; establish and implement processes, tooling, equipment and quality control methods to optimize the manufacturing operation
7. Identify and develop specifications for purchase and installation of new capital-equipment
8. Work with engineers and other personnel on continuous improvement projects as required
9. Provide technical support and assistance with the development and improvement of methods, quality, product design, cost and technical issues
10. Required to observe all safety rules and regulations, act safely and be responsible for the safety of others around the work area
11. Promote and contribute to overall team environment
12. Review and development of specifications and processes applicable to aircraft electrical systems
13. Procedure documentation for assembly/fabrication/operation of new or existing components
14. Evaluates/improve assembly and testing methods
15. Adhere to production times, staffing requirements, and related costs on quality control and industry standards
16. Assist in identifying and evaluating suppliers for new or critical processes & components
17. Assist purchasing in resolving supplier technical questions, drawing and specification interpretation

Education, Work Experience, Certification and/or Licensure:
1. B.S.M.E. or M.S.M.E. (Manufacturing, Engineering, Physics, Chemistry, Computer Science, etc.) in a technical field applicable to the job description
2. Minimum 5 years aerospace industry experience in mechanical systems design evaluation, build and installation
3. Strong knowledge of industry standards, processes and specifications related to aircraft mechanical systems and structure
4. Must have a strong working knowledge of the following:
• Evaluating and approving engineering design data (drawings, specifications, etc.)
• Participating in design reviews and providing technical feedback
• Design for manufacture-ability and design for assembly
• Identifying the need for tooling and presenting technical requirements
• Developing build plans based on installation drawings
• Proposing design changes based on RCCA findings
• Organizing and presenting technical information to all levels of management
5. Strong communication skills
6. Basic CATIA V5 experience is a plus
7. Strong knowledge of design/drafting practices
8. Evaluation of GD&T application on engineering drawings

Knowledge, Skills and Abilities:
1. Proven ability to troubleshoot design and process issues, manufacturing errors, and time consumption/ learning curve issues to improve shop floor performance
2. Teamcenter Manufacturing/ Process Planning creating MBOM’s and BOP’s are a plus
3. The employee may be asked to participate in activities to enhance and support HACI production teamwork, and provide an environment for all team members to participate in continuous improvement
4. The ability to read and interpret engineering drawings and/or specification requirements
5. Excellent problem solving skills and the ability to work in a diverse environment
6. Excellent communication and presentation skills, experience utilizing tools such as SAP, MS Office Suite (Word, Excel, PowerPoint and Project)
7. Employee must have ability to work independently and multitask with a strong work ethic
8. Time management and prioritization of assignments
9. Willingness to work outside of assigned areas (structures, systems, interiors, etc.)
10. Ability to work in a constant state of alertness and safe manner

Physical Requirements:
1. Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
2. Incumbents may be required to stand, sit, squat, walk, bend, climb ladders, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
3. Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
4. Read, hear, speak, and see with no restrictions, as required by job duties.
5. Comprehend and adhere to management directions and/or safety instructions with no restrictions.
6. Effectively communicate in Business English language.
7. Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.
8. Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties.


The Structures Company LLC is an AA/EOE.
 
Job Number: 513
Job Location: Greensboro, NC
Rate: $27-$50/Hr. **DOE**
Per Diem: Yes
Overtime: Possible
Duration: Long Term
Start Date: ASAP
Input Date: 08/23/2021
Last Updated: 04/28/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
4 Composite Structural Design Engineers Needed

Description:
MUST BE US PERSONS.
MUST have experience with composite primary airframe structures.
Knowledge of practical application of hand layup composites is most helpful.
The ability to evaluate real world problems and generate solutions in the form of engineering definition.
Understanding the requirements of a fully defined composite drawing.
1. Repair and mod work
2. Composites experience
3. CPD/Composite Workbench
4. Tooling

We are seeking 4 structural design engineer with experience developing aircraft modifications or in-service sustainment activities.
• Development of conceptual designs through manufacturing of details, assemblies and installations.
• Support operations team to ensure vehicle readiness for flight. This includes onsite support during implementation of solutions.
• Generate Engineering definition in accordance with the industry and company standards.
• Support review of manufacturing plans and procedures to ensure compliance with design requirements.
• Manage time effectively to meet the demands of internal customer requirements.
• Develop technical solutions to complex problems that require the regular use of ingenuity and creativity.

MUST HAVE
• Bachelor’s degree from an accredited institution, with a concentration in Aeronautical, Astronautical, Aerospace, or Mechanical Engineering.
• 4-8+ years of experience in aerospace industry with a strong design emphasis.
• In depth knowledge of structural design associated with composite aircraft and associated CAD workbenches. CATIA V5 preferred.
• Experience in aircraft sustainment programs or material review board desired.
• Experience with composite tooling, fabrication, and manufacturing methods.
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired.
• Experience with Product Lifecycle Management tools (PLM software), requirements management tools and configuration management.
• Excellent verbal and written communication skills.
• Strong team player and ability to work independently with excellent organizational and problem-solving skills.

*Jobs can be onsite in Mojave, CA or in T or C, NM

The Structures Company LLC is an AA/EOE
 
Job Location: Truth or Consequences, NM
Rate: $60-70/hr
Per Diem: Yes
Overtime: Possible
Duration: ~6 months
Start Date: ASAP
Input Date: 07/16/2021
Last Updated: 06/14/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
5 Structural Design Engineers Needed

Description:
MUST BE US PERSONS.
Experience with CPD, composite workbench OR Fibersim is a plus.

MUST have knowledge of practical application of hand layup composites.
The ability to evaluate real world problems and generate solutions in the form of engineering definition.
Understanding the requirements of a fully defined composite drawings.
1. Repair and aircraft modifications
2. Composites experience
3. CPD/Composite Workbench
4. Tooling

We are seeking 5 structural design engineer with experience developing aircraft modifications or in-service sustainment activities.
• Development of conceptual designs through manufacturing of details, assemblies and installations.
• Support operations team to ensure vehicle readiness for flight. This includes onsite support during implementation of solutions.
• Generate Engineering definition in accordance with the industry and company standards.
• Support review of manufacturing plans and procedures to ensure compliance with design requirements.
• Manage time effectively to meet the demands of internal customer requirements.
• Develop technical solutions to complex problems that require the regular use of ingenuity and creativity.

MUST HAVE
• Bachelor’s degree from an accredited institution, with a concentration in Aeronautical, Astronautical, Aerospace, or Mechanical Engineering.
• 4-8+ years of experience in aerospace industry with a strong design emphasis.
• In depth knowledge of structural design associated with composite aircraft and associated CAD workbenches. CATIA V5 preferred.
• Experience in aircraft sustainment programs or material review board desired.
• Experience with composite tooling, fabrication, and manufacturing methods.
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired.
• Experience with Product Lifecycle Management tools (PLM software), requirements management tools and configuration management.
• Excellent verbal and written communication skills.
• Strong team player and ability to work independently with excellent organizational and problem-solving skills.

The Structures Company LLC is an AA/EOE
 
Job Number: 487
Job Location: Mojave, CA
Rate: $60-$70/Hr. ***DOE***
Per Diem: Yes
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 02/14/2022
Last Updated: 02/24/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
5 Structural Design Engineers Needed

Description:
MUST BE US PERSONS.
MUST have practical application of hand layup composites experience.
The ability to evaluate real world problems and generate solutions in the form of engineering definition.
Understanding the requirements of a fully defined composite drawings.
1. Repair and aircraft modification work
2. Composites experience
3. CPD/Composite Workbench OR Fibersim is a plus.
4. Tooling

We are seeking 5 structural design engineer with experience developing aircraft modifications or in-service sustainment activities.
• Development of conceptual designs through manufacturing of details, assemblies and installations.
• Support operations team to ensure vehicle readiness for flight. This includes onsite support during implementation of solutions.
• Generate Engineering definition in accordance with the industry and company standards.
• Support review of manufacturing plans and procedures to ensure compliance with design requirements.
• Manage time effectively to meet the demands of internal customer requirements.
• Develop technical solutions to complex problems that require the regular use of ingenuity and creativity.

MUST HAVE
• Bachelor’s degree from an accredited institution, with a concentration in Aeronautical, Astronautical, Aerospace, or Mechanical Engineering.
• 4-8+ years of experience in aerospace industry with a strong design emphasis.
• In depth knowledge of structural design associated with composite aircraft and associated CAD workbenches. CATIA V5 preferred.
• Experience in aircraft sustainment programs or material review board desired.
• Experience with composite tooling, fabrication, and manufacturing methods.
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired.
• Experience with Product Lifecycle Management tools (PLM software), requirements management tools and configuration management.
• Excellent verbal and written communication skills.
• Strong team player and ability to work independently with excellent organizational and problem-solving skills.

The Structures Company LLC is an AA/EOE
 
Job Number: 489
Job Location: Truth or Consequences, NM
Rate: $60-$70/Hr. **DOE**
Per Diem: Yes
Overtime: Possible
Duration: 6+ Months **Possibly Longer**
Start Date: ASAP
Input Date: 11/08/2021
Last Updated: 02/08/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2 Composite Structural Design Engineers Needed

Description:
MUST BE US PERSONS.
MUST have experience with aircraft composites, repairs, modifications, hand layup ply, tooling.

We are seeking 2 structural design engineer with experience developing aircraft modifications, repairs or in-service sustainment activities.
• Development of conceptual designs through manufacturing of details, assemblies and installations.
• Support operations team to ensure vehicle readiness for flight. This includes onsite support during implementation of solutions.
• Generate Engineering definition in accordance with the industry and company standards.
• Support review of manufacturing plans and procedures to ensure compliance with design requirements.
• Manage time effectively to meet the demands of internal customer requirements.
• Develop technical solutions to complex problems that require the regular use of ingenuity and creativity.

MUST HAVE
• Bachelor’s degree from an accredited institution, with a concentration in Aeronautical, Astronautical, Aerospace, or Mechanical Engineering.
• 4-8+ years of experience in aerospace industry with a strong design emphasis.
• In depth knowledge of structural design associated with composite aircraft and associated CAD workbenches. CATIA V5 preferred.
• Experience in aircraft sustainment programs or material review board desired.
• Experience with composite tooling, fabrication, and manufacturing methods.
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired.
• Experience with Product Lifecycle Management tools (PLM software), requirements management tools and configuration management.
• Excellent verbal and written communication skills.
• Strong team player and ability to work independently with excellent organizational and problem-solving skills.

The Structures Company LLC is an AA/EOE
 
Job Location: Mojave, CA
Rate: $65-75/hr
Per Diem: Yes
Overtime: Possible
Duration: ~6 months
Start Date: ASAP
Input Date: 09/15/2021
Last Updated: 10/07/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Mechanic

Description:
An A&P Mechanic job in Fort Worth, TX is currently available through Belcan. If you are interested in career growth, company stability with a ton of learning opportunity this is the job for you. In this role, you will be responsible to carry out assigned tasks, in accordance with the applicable maintenance manual, ensure maintenance operations are performed in the appropriate sequence as determined by the application maintenance data. To be considered for this role, you will need to have been a licensed mechanic for at least 1 year with 10-15 years of experience or 5-6 years experience with Falcon and Gulfstream aircraft.

JOB TITLE Job duties:

* Ensure that inspections are requested in an orderly and timely manner, and that the maintenance activities are performed according to the appropriate maintenance data.
* Ensure that tools and equipment used to make airworthiness determinations are labeled as calibrated and are within date limits in accordance with the manual
* Complete the appropriate paper work accurately
* Must have A&P License
* Minimum 1 year experience and have FAA Airframe rating
* Or 3 years minimum experience with Falcon 50, 90, 2000 and/or IAI G100, G150 G200 GIV
* Must have at least 10 years experience or 5-6 years experience with Falcon and Gulfstream aircraft.


If you are interested in this A&P Mechanic job please apply via the apply now link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity

 
Job Number: 314932
Job Location: Fort Worth, TX
Rate: --
Per Diem: --
Overtime: --
Duration: JOB-CONTRACT_TYPE
Start Date: --
Input Date: 08/04/2021
Last Updated: 11/18/2021
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Advanced Engineering Technician - 2nd Shift

Description:
An Advanced Engineering Technician 2nd Shift job in Scottsdale, AZ is currently available through Belcan. In this role, you will be responsible for supporting engineering activities such as design, test, check-out, modification, fabrication and assembly of prototype electro mechanical systems, experimental design circuitry, laser/light transmission devices or specialized test equipment. To be considered for this role, you will have an Associate's Degree in a related discipline, plus a minimum of 3 years of relevant experience. Due to the nature of the work performed in this facility, US citizenship is required.

Advanced Engineering Technician 2nd Shift Job duties:

* Interprets basic engineering drawings, diagrams and schematics.
* Constructs, modifies, debugs, troubleshoots, calibrates, tests and adjusts a variety of tools, equipment and systems.
* Conducts, analyzes and documents statistically based experiments to define process parameters.
* Implements and documents complex solutions for process improvement.
* Designs and constructs basic tooling and fixtures to accomplish unique tasks.

Qualifications:

* An Associate's degree in related discipline or equivalent plus a minimum of 3 years of relevant experience.
* Solid knowledge and proficiency in the use of fabrication tools.
* Ability to fabricate complex hardware.
* Solid knowledge of generally accepted technical theory.


If you are interested in this Advanced Engineering Technician 2nd Shift position in Scottsdale, AZ please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 316095
Job Location: Scottsdale, AZ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 09/10/2021
Last Updated: 10/13/2021
Firm Name: BELCAN TECHSERVICES
Attention: ScottWatkins
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Advanced Engineering Technician - 3rd Shift

Description:
An Advanced Engineering Technician - 3rd Shift job in Scottsdale, AZ is currently available through Belcan. In this role, you will support engineering activities such as design, test, check-out, modification, fabrication and assembly of prototype electro mechanical systems, experimental design circuitry, laser/light transmission devices or specialized test equipment. To be considered for this role, you will have an Associate's degree in related discipline or equivalent plus a minimum of 3 years of relevant experience.

Advanced Engineering Technician - 3rd Shift Job duties:

* Interprets basic engineering drawings, diagrams and schematics
* Constructs, modifies, debugs, troubleshoots, calibrates, tests and adjusts a variety of tools, equipment and systems
* Conducts, analyzes and documents statistically based experiments to define process parameters
* Implements and documents complex solutions for process improvement
* Designs and constructs basic tooling and fixtures to accomplish unique tasks
* Organizes, analyzes and interprets data to identify cause/effect relationships and recommends resolution/process improvement

Qualifications:

* An Associate's degree in related discipline or equivalent plus a minimum of 3 years of relevant experience
* Solid knowledge and proficiency in the use of fabrication tools
* Ability to fabricate complex hardware
* Solid knowledge of generally accepted technical theory


If you are interested in this Advanced Engineering Technician - 3rd Shift position in Scottsdale, AZ please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 315298
Job Location: Scottsdale, AZ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/13/2021
Last Updated: 09/15/2021
Firm Name: BELCAN TECHSERVICES
Attention: ScottWatkins
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Advanced Engineering Technician-2nd shift

Description:
An Advanced Engineering Technician-2nd shift job in Scottsdale, AZ is currently available through Belcan. In this role, you will perform hardware integration and test of highly complex, highly-reliable spaceflight payload electronics. To be considered for this role, you will have a Associate's degree in related discipline or equivalent is required plus a minimum of 3 years of relevant experience.

Advanced Engineering Technician-2nd shift Job Duties:

* Perform alignment, testing, problem troubleshooting, data analysis, and technical evaluation of Digital and RF modules
* Developing and prepare reports, procedure documentation, and a high level of understanding of product specifications

Qualifications:

* Recent experience working with high-reliability spaceflight electronic hardware, including experience in both digital and RF/microwave circuit testing and special test equipment build
* Competent computer skills and knowledge of UNIX, Windows and MS Office are required.
* Able to interpret complex engineering drawings, diagrams and schematics and the necessary interfaces.
* Interface daily with engineering and may be tasked to run special tests.
* Strong background in electrical test techniques is required. Knowledgeable use of test equipment such as network analyzers, spectrum analyzers, logic analyzers, oscilloscopes, and signal generators is required. Candidate must be able to read and follow detailed work instructions and/or test procedures. Second and/or third shift coverage will be required for most assignments.


If you are interested in this Advanced Engineering Technician-2nd shift job in Scottsdale, AZ, please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

 
Job Number: 314490
Job Location: Scottsdale, AZ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/21/2021
Last Updated: 09/15/2021
Firm Name: BELCAN TECHSERVICES
Attention: ScottWatkins
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Advanced Engineering Technician-3rd shift

Description:
An Advanced Engineering Technician-3rd shift job in Scottsdale, AZ is currently available through Belcan. In this role, you will perform hardware integration and test of highly complex, highly-reliable spaceflight payload electronics. To be considered for this role, you will have a Associate's degree in related discipline or equivalent is required plus a minimum of 3 years of relevant experience.

Advanced Engineering Technician-3rd shift Job Duties:

* Perform alignment, testing, problem troubleshooting, data analysis, and technical evaluation of Digital and RF modules
* Developing and prepare reports, procedure documentation, and a high level of understanding of product specifications

Qualifications:

* Recent experience working with high-reliability spaceflight electronic hardware, including experience in both digital and RF/microwave circuit testing and special test equipment build
* Competent computer skills and knowledge of UNIX, Windows and MS Office are required.
* Able to interpret complex engineering drawings, diagrams and schematics and the necessary interfaces.
* Interface daily with engineering and may be tasked to run special tests.
* Strong background in electrical test techniques is required. Knowledgeable use of test equipment such as network analyzers, spectrum analyzers, logic analyzers, oscilloscopes, and signal generators is required. Candidate must be able to read and follow detailed work instructions and/or test procedures. Second and/or third shift coverage will be required for most assignments.


If you are interested in this Advanced Engineering Technician-3rd shift job in Scottsdale, AZ, please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

 
Job Number: 314491
Job Location: Scottsdale, AZ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/21/2021
Last Updated: 09/15/2021
Firm Name: BELCAN TECHSERVICES
Attention: ScottWatkins
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Designer

Description:
An Aerospace Designer job in Cincinnati, OH and Indianapolis, IN is currently available at Belcan. This is a full time, direct job with full benefits. Great matching candidates will have aerospace interiors design experience with seating and a degree in mechanical design or engineering . You will be working at Belcan as part of a team supporting our customer

Aerospace Design Engineer job duties:
* Engineering definition of aerospace seats and other interiors for multiple customers.
* You will work with all levels of engineering stake holders to drive the desired outcome.
* Responsible for your work as part of a team to meet customer deliverables and dates.
Qualifications:
* BS in Mechanical or Design Engineering or equivalent experience
* Experience with NX and TeamCenter
* Modeling & Drafting
* Excellent communication and organization skills
* Legal authorization to work in the US required
Desired but not required skills:
* Electrical Harness Routing
* Sheet Metal Design
* Project management experience

If you are interested in this Aerospace Designer job in Cincinnati, OH please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.

Belcan is an equal opportunity employer. EOE/M/F/D/V

Build a challenging and rewarding career with an industry leader!


 
Job Number: 315642
Job Location: Cincinnati, OH
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/25/2021
Last Updated: 01/24/2022
Firm Name: BELCAN TECHSERVICES
Attention: TimRipperger
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Tool Maker

Description:
We are seeking a motivated and experienced machinist to join our dynamic team of professionals in an Aerospace tooling & gage manufacturing facility in New Britain CT. The Tool Maker will be a critical part of our team, responsible for ensuring quality in the tooling making within the Aerospace industry. The ideal candidate will have a minimum of 5 years experience in Tooling & Gage fabrication, production, or manufacturing specifically within the Aerospace and Defense industry.

You Will:
Fabricate fixtures, gages, and tooling using aerospace specifications
Utilize blueprints, sketches, and verbal instructions to fabricate, or repair tooling, gages
Assure safe operation and care of toolroom equipment
Ensure quality standards are being met per customer requirements
Assess complex tooling and equipment needs and refurbish as required
Troubleshoot and resolve tooling problems
Set up and operate all toolroom equipment independently
Strive to continuously improve tooling and reduce manufacturing errors or scraps
Cleaning up the work station as needed to maintain cleanly and organized work stations
Must be willing to share knowledge of the trade, train apprentices, and instruct other machinists to perform tasks on larger jobs
Be able to work in a fast pace environment
Be willing to work 45+ hours a week when workload requires

You'll Need:
Machinist with the ability to plan and run jobs
Experience in a job shop environment preferred
Must have a minimum of 5 years experience with tool making, specifically in Aerospace industry
Must have familiarity with CNC processing
Ability to hold tolerances as close as +/- .0002
Strong understanding of GDP blueprint reading and GD&T symbols
Experience in Aerospace Tooling including: Jigs, Fixtures, Ground Support Equipment
 
Job Number: JR-025121
Job Location: New Britain, CT
Duration: Permanent Full-Time
Input Date: 09/09/2021
Firm Name: CYIENT
Attention: Gunner Dahlke
Address: 1401 NOLAN RYAN EXPY
City, State: ARLINGTON, TX 76011
Website: www.cyient.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Assembly Technicians

Description:
STS Technical Services is hiring Aircraft Assembly Technicians in Melbourne, Florida.

Position Summary:

Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations.  Analyze processes and process improvement. May be responsible for distributing activities and goals, coordinate and guide technical support groups. Assist with new operators, as well as assist in processes analysis.

 Job Duties:
Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables.
Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws.
Makes continuity checks on work in process and completed.
May conduct quality inspections on processing line in accordance with quality specifications.
May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions
Follows approved assembly procedures for component or aircraft structures, consulting internal procedures that have been FAA approved, original equipment manufacturers (OEM’s) technical data, and work package instructions.
Positions and aligns subassemblies in jigs or fixtures, using measuring instruments, following blueprint lines and index points.
Inspects completed work to identify any needed rework before signing off; ensures that repaired components meet prescribed standards and tolerances.
Performs serviceability tests as required, utilizing test equipment specified in technical manuals.
Completes work package documentation as required by FAA and/or repair station manual.
Submits completed work to Quality Assurance for final/in progress inspection and certification of airworthiness.
Essential Knowledge, Skills & Abilities:

Education: 

High School/ GED
A&P and mechanical/electrical experience a plus
Structures experience a plus.

Experience: 

A minimum of three (3) years experience with assembly, mechanical, electrical or aircraft structures as well as able to use all tech data and aircraft drawings to locate part numbers and accomplish repairs.
Knowledge, Skills & Abilities:
Proficient in riveting, installation of relate hardware, usage of precision instruments and utilization of hand tools to perform these tasks.
Must be able to fabricate parts.
Reads work orders, blueprints, and specifications or examines sample or damaged part or structure to determine repair or fabrication procedures and sequence of operations.
Repair body or structure of aircraft according to specifications.
Knowledge of machines and tools, including their designs, uses, repair, and maintenance.
Be proficient in the usage of air powered hand tools and related equipment.
Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods.
Ability to work different shifts and flexible hours if required.
Ability to work in a safe professional manner adhering to all regulatory requirements including, OSHA, EPA, State and Federal regulations.
Working Conditions / Environment/  Special Requirements:
Ability to work in a safe professional manner adhering to all regulatory requirements including, OSHA, EPA, State and Federal regulations.
Ability to work flexible hours and different shifts if required
Employees will be subject to the random drug and alcohol testing under FAA regulations
About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.

#ZR
 
Job Number: 37807
Job Location: Melbourne, FL
Input Date: 09/10/2021
Firm Name: STS AEROSTAFF SERVICES
Attention: Jannely Castro
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Performance Software Developer

Description:
Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services.

Unique Skills:
• Preference will be given to:
• Candidate with Computer Science degree with some exposure to aerospace, or
• Candidate with Aerospace degree with advanced programming skills
• Advanced programming skills and experience with various programs including Matlab, Python, C, C++
• DO-178 experience highly desired
• Preferred but not required:
• EFB, SCAP experience
• Aircraft Performance background
• Experience with various programming paradigms including functional programming/object-oriented programming

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Principle Duties and Responsibilities:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product

Other Requirements:
• Advanced degree in engineering, or related curriculum preferred
• The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 24-492
Job Location: Savannah, GA
Rate: $55-$72/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ Year
Start Date: ASAP
Input Date: 08/06/2021
Last Updated: 09/27/2021
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Performance Software Developer 3

Description:
Inconen is looking for an Aircraft Performance Software Developer 3 for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
Preference will be given to:
- candidate with Computer Science degree with some exposure to aerospace, or
- candidate with Aerospace degree with advanced programming skills
- Advanced programming skills and experience with various programs including Matlab, Python, C, C++
- DO-178 experience highly desired

Preferred but not required:
- EFB, SCAP experience
- Aircraft Performance background
- Experience with various programming paradigms including functional programming/object-oriented programming

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) years in specific technical discipline or 10 years broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Principle Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering related field preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 14929
Job Location: Savannah, GA
Rate: $55.00 - $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 02/15/2021
Last Updated: 11/29/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Performance Software Developer 4

Description:
Inconen is looking for an Aircraft Performance Software Developer 4 for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
Preference will be given to:
- candidate with Computer Science degree with some exposure to aerospace, or
- candidate with Aerospace degree with advanced programming skills
- Advanced programming skills and experience with various programs including Matlab, Python, C, C++
- DO-178 experience highly desired

Preferred but not required:
- EFB, SCAP experience
- Aircraft Performance background
- Experience with various programming paradigms including functional programming/object-oriented programming

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 14930
Job Location: Savannah, GA
Rate: $65.00 - $72.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 02/15/2021
Last Updated: 10/21/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Structures Mechanics

Description:
STS Technical Services is hiring Aircraft Structures Mechanics in Oscoda, Michigan.

Job Description:

The Aircraft Sheet Metal Mechanic repairs, fabricates, modifies, and installs sheet metal parts, items, and assemblies. Sheet metal mechanic work requires knowledge of the physical properties and working characteristics of sheet metal, knowledge of tools and equipment required in the sheet metal trade, and knowledge of shop mathematics and principles.

Job Responsibilities:
Shoot and buck rivets to specifications following FAA guidelines
Recognize differences in types of metals including structural strength and thickness
Perform sheet metal bends to guidelines and specifications as dictated in normal aviation practices
Remove existing rivets from aircraft structure
Work with and around a variety of chemicals and follow all OSHA standards in regards to PPE
Build components for aircraft applications using a variety of sheet metal materials
Make decisions regarding how to make repairs and know what repairs can and can’t be done
Understand and apply FAA standards
Read blueprints to ensure build and modification completion, follow both written and verbal instructions
Effectively document job completion paperwork
Other duties as assigned
Job Requirements:
Valid FAA Airframe & Powerplant license strongly preferred
Previous experience working with sheet metal, or completion of a technical school program in a similar field of study
Must provide own tools
Ability to use and effectively manager ERP program, time clock and company intranet
Manage time to effectively meet company priorities
Abilities:
Crawl in and out of tight spaces
Lay in a prone position for more than 4 hours
Comfortably work at elevated heights of at least 40 feet for extended periods of time
Lift balance, and carry 50 lbs.
Work in enclosed hangars and exterior weather conditions
Work in close proximity to other people
Benefits:
A $500 referral bonus if your referral works at least 60 days
Long-term contract and direct hire positions are available. It’s all about you and what you prefer.
Overtime is offered in abundance
If you decide that you’d like to go direct, the benefits package you’ll receive is exceptional.
Gain valuable experience working on 747’s and 767’s with the opportunity to obtain Gen Fam courses.
A perfect landing place for veterans looking for a great career
Due to a recent expansion, Kalitta Air just created 150 new jobs, and that means there are great advancement opportunities for those hoping to move into inspection, lead, supervisor and / or foreman roles
Oscoda, Michigan offers a low-cost of living but a high-quality of life and a strong sense of community
If you love the outdoors, you’ll love Oscoda. World class hunting and fishing is in your backyard
About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.

#ZR
 
Job Number: 36331
Job Location: Oscoda, MI
Input Date: 09/10/2021
Firm Name: STS AEROSTAFF SERVICES
Attention: Mindy Paolini
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Structures Technician

Description:
STS Technical Services is hiring Aircraft Structures Technicians in Nashville, Tennessee.

Position Summary:

Performs structural repairs and fabrication of parts.  Ability to perform repairs per aircraft SRM and/or engineering dispositions.

Rates & Bonus:
Our client is now paying $32/hr with a $2000.00 sign on bonus.
Duties & Responsibilities:
Follows approved repair/modification procedures for component or aircraft, consulting internal procedures that have been FAA approved, original equipment manufacturers (OEM’s) technical data, and work package instructions.
Positions and aligns subassemblies in jigs or fixtures, using measuring instruments, following blueprint lines and index points
Inspects completed work to identify any needed rework before signing off; ensures that repaired components meet prescribed standards and tolerances.
Performs serviceability tests on repairs using test equipment specified in technical manuals.
Completes work package documentation by signing/stamping off after finishing all designated operations.
Submits completed work to Quality Assurance for final/in progress inspection and recertification of airworthiness.
Bolts, screws, or rivets accessories to fasten, support, or hang components and subassemblies.
Cuts, trims, and files parts, and verifies fitting tolerances to prepare for installation.
Drills holes in structure and subassemblies, and attaches brackets, hinges, or clips to secure installation or to fasten subassemblies.
Inspects and tests installed units, parts, and equipment for fit, performance, and compliance with standards, using measuring instruments and test equipment.
Positions and aligns subassemblies in jigs or fixtures, using measuring instruments, following blueprint lines and index points.
Able to identify bolts, screws, rivets and various fasteners used to support or assemble components.
Installs units, parts, equipment, and components in structural assembly, according to blueprints and specifications, using hand tools and power tools.
Locates and marks reference points and holes for installation of parts and components, using jigs, templates, and measuring instruments.
Provide information and documentation for engineering requests.
Comply with repair station procedures (RSM /QCM) and company policies (SOP) when performing aircraft or component maintenance.
Qualifications:

Education:

High School/ GED
A&P and / or structures experience a plus, or repairman’s certificate may substitute for A&P.

Experience:

Prefer at least 2 years experience.
Experience doing aircraft structures as well as able to use all tech data and aircraft drawings to locate part numbers and accomplish repairs.

Knowledge, Skills & Abilities:

Must be able to fabricate parts.
Reads work orders, blueprints, and specifications or examines sample or damaged part or structure to determine repair or fabrication procedures and sequence of operations.
Repair body or structure of aircraft according to specifications.
Knowledge of machines and tools, including their designs, uses, repair, and maintenance.
Be proficient in the usage of air powered hand tools and related equipment.
Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods.
Ability to work different shifts and flexible hours if required.
Ability to work in a safe professional manner adhering to all regulatory requirements including, OSHA, EPA, State and Federal regulations.
Working Conditions / Environment / Special Requirements:
Ability to work in a safe professional manner adhering to all regulatory requirements including, OSHA, EPA, State and Federal regulations.
As required by the position, must have the ability to wear a respirator as per OSHA 29 CFR 1910.134 “Respirator Protection” regulations with no restrictions that would prevent the proper use and/or seal of the respirator.
Ability to work flexible hours and different shifts if required.
Employees will be subject to the random drug and alcohol testing under FAA regulations.
Valid Drivers License.
Must be able to work in hot/Cold – Indoor/Outdoor.
Must be able to lift up to 50 lbs unassisted.
Must be able to do work above head.
Must be able to work at heights.
Must be able to work in confined spaces.
Must be able to climb.
About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.

#ZR
 
Job Number: 37622
Job Location: Nashville, TN
Input Date: 09/10/2021
Firm Name: STS AEROSTAFF SERVICES
Attention: Celeste Rodriguez
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Technicians Needed

Description:
WE NEED 70 TECHNICIANS TO START ASAP!

Have your friends come with you! Great opportunity with a great aerospace company!

Must have:

5 plus years of experience
Proof of US Persons
Experience working with composite aircraft
Background in one or more of the following: assembly, fabrication, systems, lay-up, build-out, wire harnesses, mechanical, hydraulic and pneumatic systems
A&P preferred, but not required
Per Diem splits available for qualified candidates.

EOE

Job Types: Full-time, Contract

Pay: $32.00 - $43.00 per hour
 
Job Location: Mojave, CA
Rate: 35+
Per Diem: Possible
Overtime: Possible
Duration: Long-term
Start Date: ASAP
Input Date: 09/15/2021
Last Updated: 08/24/2023
Firm Name: STRUCTURES COMPANY LLC
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airframe & Powerplant Mechanics

Description:
STS Technical Services is hiring A&P Mechanics in Oscoda, Michigan.

Job Duties & Requirements:
A&P’s to perform hangar and line maintenance on mostly Boeing Commercial Aircraft
Kalitta’s own fleet consists of 747s, 767s and 777s
Mechanics do not need to be current or have an A&P, but they must have experience if they do not have a valid A&P
The job duties of an A&P mechanic vary from preventive maintenance to repairs
A mechanic makes routine inspections, documents inspections and repairs, performs scheduled maintenance and runs tests after making repairs or performing maintenance
Job duties may vary based on which part of the plane is being worked on
A mechanic working on the exterior of a plane may be fixing a broken wing, repairing paint or securing a door so it seals properly
An A&P mechanic inspects, services and repairs airplanes to ensure they’re operating correctly and safely
A mechanic is responsible for ensuring that airplanes get regular maintenance and that any problems are fixed correctly
Mechanics may work on different parts of an aircraft, such as the engine, landing gear, brakes and pumps
A mechanic working on the engine may be changing the oil, replacing belts or repairing a broken part
An A&P mechanic must know and follow all regulations set by the FAA. FAA regulations govern the maintenance schedules, inspections and repairs made to airplanes. The FAA conducts regular checks on equipment and ensures regulations are being met.
Benefits:
Long-term contract and direct hire positions are available. It’s all about you and what you prefer.
Overtime is offered in abundance
If you decide that you’d like to go direct, the benefits package you’ll receive is exceptional.
Gain valuable experience working on 747’s and 767’s with the opportunity to obtain Gen Fam courses.
A perfect landing place for veterans looking for a great career
Due to a recent expansion, Kalitta Air just created 150 new jobs, and that means there are great advancement opportunities for those hoping to move into inspection, lead, supervisor and / or foreman roles
Oscoda, Michigan offers a low-cost of living but a high-quality of life and a strong sense of community
If you love the outdoors, you’ll love Oscoda. World class hunting and fishing is in your back yard
About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.

#ZR
 
Job Number: 36242
Job Location: Oscoda, MI
Input Date: 09/10/2021
Firm Name: STS AEROSTAFF SERVICES
Attention: Kimberley Ayres
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airworthiness Inspector Sr. (Second Shift)

Description:
Inconen is looking for an Airworthiness Inspector Sr. for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
Flight Test experience.

Education and Experience Requirements:
High School graduate/GED. Airframe and Powerplant License required. Six (6) years aircraft/component inspection experience to include (3) years' experience on large or mid-size aircraft.

Position Purpose:
The Senior Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews related paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed.

Principal Duties and Responsibilities:
Essential Functions: 1. Responsible for all quality control inspections on aircraft/components in the Repair Station. 2. Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data. 3. Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting. 4. Keeps accurate, neat and legible records of the work performed on aircraft/components. 5. Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner. 6. Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service. 7. Ensures aircraft/components are airworthy prior to any flight activities. 8. Mentors technicians on effective documentation.

Additional Functions: 1. Accomplishes research of Aircraft Log Books and or computer maintenance programs to identify ongoing inspection programs, status of aircraft within those programs, Airworthiness Directive status, and Service Bulletin status. 2. Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual. 3. Assists leads and supervisors in training of Airworthiness Inspectors. Promote high standards of quality through instruction and by setting the example. 4. Works with and instructs subordinate mechanics/technicians in troubleshooting and operational/functional procedures. 5. Signs FAA 8130-9 Statement of conformity on projects completed on his/her aircraft. 6. May perform ODA functions as assigned. 7. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. 8. Performs other duties as assigned.

Other Requirements: 1. Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents. 2. Proficient in blueprint reading, use/interpretation of Maintenance Manuals, test specifications and other inspection related documentation as required. 3. Familiar with FAA certification approval processes. 4. Strong written and verbal communication skills. Must be able to effectively prioritize tasks. 5. Strong computer skills. 6. Proficient with Microsoft Word. 7. Minimum 20 WPM typing speed.
 
Job Number: 16875
Job Location: Savannah, GA
Rate: $32.63 - $36.25/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/02/2021
Last Updated: 12/01/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Qualification Test Engineer

Description:
ABOUT THE JOB:
This position is responsible for performing qualification testing of various avionics systems.

REQUIRED SKILLS:
• 3+ years aerospace qualification testing experience
• High level of knowledge in one or more of the following DO-160 test environments and procedures:
o Physical (temperature, vibration, humidity, altitude, waterproofness, etc.)
o Power Input (power input, ISS, VS, AFCS, etc.)
o EMI (emissions, RF susceptibility, lightning, ESD, etc.)
• Knowledge of qualification test setups including:
o Able to know if a lab is setting the test environment correctly
o Able to know if the lab is collecting the data needed for the report
• Experience reviewing qualification test data
• Experience developing qualification test reports
• Experience troubleshooting test failures and distinguishing the cause of the failure such as:
o Is it test equipment?
o Is it test setup?
o Is it unit under test?
o Is it procedural?
• Effective Communication Skills (both verbal and written)
• Self-motivated, Accountable, Detail-oriented
• Ability to work in a collaborative team environment

PREFERRED SKILLS:
• Knowledge of attitude/altitude Technical Standard Orders (TSOs)
• Knowledge of cockpit voice recorder TSOs and Advisory Circular ED-112A
• Knowledge of Minimum Performance Standard AS8034B for Multipurpose Electronic Displays

ABOUT THE COMPANY:
Real Time Consulting (RTC) exists to partner outstanding engineering talent to support our clients’ success. Unsurpassed service is delivered to our clients by upholding responsibility, teamwork and quality. Our primary commitment is to help our clients. Since 1997, RTC has been protecting and enhancing lives with safe, reliable, innovative solutions, providing full life-cycle design, development and testing of EMBEDDED ENGINEERING SYSTEMS and SOFTWARE SOLUTIONS with Program Management and Consulting Services. Our employees average 20+ years of versatile and accomplished expertise to our clients, driving continuous innovation forward. Employee’s innovative and analytical ideas are cultivated while maintaining the big picture vision in a fast-paced, changing environment. Our corporate values are to Uphold Responsibility, Support People, Promote Teamwork and Deliver Quality!

This position may require exposure to software, source code or technology that is subject to US export control laws and regulations (i.e., International Traffic in Arms Regulations or the Export Administration Regulations). To comply with these requirements, you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Departments of State or Commerce, as applicable.

RTCo is an Equal Opportunity Employer; employment with RTCo is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

To qualify for all positions with Real Time Companies, applicants must be legally authorized to work in the United States and should not require now, or in the future, sponsorship for employment visa status. Please be aware that Real Time Companies does not sponsor employment-based visas. Additionally, certain positions with Real Time Companies that involve work with government entities may have more restrictive employment status requirements, such as U.S. citizenship, based on security clearance requirements or other governmental requirements. Real Time Companies is an Equal Opportunity Employer M/F/D/V.
 
Job Location: Phoenix, AZ
Rate: Open
Per Diem: No
Overtime: Straight Time
Duration: 3+ months
Start Date: ASAP
Input Date: 07/30/2021
Last Updated: 09/24/2021
Firm Name: REAL TIME CONSULTING
Address: 20601 N 19TH AVE STE 110
City, State: PHOENIX, AZ 85027
Phone: 623/792-8946
Website: www.real-time-consulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Software Engineer

Description:
• Help with the numerous software development tasks. Support Jenkins pipeline development, avionics backlog work, continued DAS cleanup work, silicon bird development, etc.

Qualifications:
• 5+ years industry experience, ideally in aerospace or automotive software development
• Exposure to a wide variety of aircraft software development standards
• Significant experience in C++
• Experience with real time operating systems and process scheduling
• Experience interfacing with I/O hardware including analog, discrete, and serial data
• Experience with socket programming and network communication including an understanding of the physical, data, network, and transport layers
• Experience developing automated test suites
• Excellent communication skills — able to partner internally and research and interact with potential suppliers

Ideal Qualifications:
• Experience as the responsible engineer for critical components of an aircraft avionics suite
• Experience with continuous integration tools
• Experience with Python, shell scripting
• Experience developing and refining system level requirements from formal and informal sources
 
Job Number: 45-010
Job Location: Denver, CO
Rate: DOE
Per Diem: Yes
Overtime: Possible
Start Date: ASAP
Input Date: 07/26/2021
Last Updated: 09/27/2021
Firm Name: PRECISION PERSONNEL INC
Attention: Cameron
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics System Test Engineer

Description:
The Avionics System Test Engineer will perform Avionics and Mission systems integration testing to verify and trace to the technical requirements as well as generate normal range and robustness test cases and procedures in host scripts.

Responsibilities

• Execute the testing on the target software installed in the target hardware on the test bench.

• Test the interfaces between systems in the Invictus 360 System Integration lab and test benches

• Analyze the results and disposition any test failures, update the test trace matrix (as reqd), fill out the checklists (as reqd).

• Configuration manage the tests and results and other test related artifacts in the DIMENSIONs configuration management tool.

Requirements:

BS, Electronics / computer science required. Must have Aerospace/Defense experience
Minimum of 3+ yrs.
Must have experience with Avionics test case/procedures and test scripts generation using C#, Microsoft software suite applications (Word/Excel, etc.), Lab test bench environment
Experience with aeronautical bus architecture including ARINC 429, RS 422, Ethernet, 1553 and discrete types
US person required
 
Job Number: JR-026243
Job Location: Fort Worth, TX
Duration: Permanent Full-Time
Input Date: 09/08/2021
Firm Name: CYIENT
Attention: Gunner Dahlke
Address: 1401 NOLAN RYAN EXPY
City, State: ARLINGTON, TX 76011
Website: www.cyient.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Technician

Description:
An Avionics Technician job in Palo Alto, CA is currently accepting applications. This is a 2-month contract position with our key aviation client. In this role, you will be responsible for fabricate and install wire harnesses, and electronic systems, modules, and sub-assemblies on our industry leading eVTOL aircraft. You will be working in a fast-paced prototype development environment and will be expected to work as part of a team. To be considered for this role, you will have a High School Diploma or equivalent along with 5+ years of aviation experience performing modifications or aircraft wiring installs and 3+ years of experience as a harness technician working on application critical, high-complexity harnesses.

Avionics Technician Job Responsibilities:
* Install and fabricate wire harnesses through lay in, routing, dressing and connector termination using aerospace approved tooling and best practices.
* Locate and install harness mounting hardware inclusive of click studs and clamps.
* Able to work from both very detailed, released manufacturing drawings as well as development harnesses sketches.
* Meet scheduled timelines and, in some cases, aggressive deadlines to have hardware ready for project milestones
* Follow engineering designs and building concepts/prototypes assisting with testing, continuity checks and data collection.

Avionics Technician Job Requirements:
* High School Diploma or equivalent. A&P Certification preferred
* 5+ years of aviation experience performing modifications or aircraft wiring installs
* 3+ years of experience as a harness technician working on application critical, high-complexity harnesses
* Underpinning knowledge of IPC 610/620
* Demonstrated familiarity with AC43.13-B
* Prior experience of bundling harness using techniques and methods including wax string lacing
* Must have hands on experience using shop tools and calibrated aerospace tooling including torque wrenches, crimping and striping tools.
* Must be able to lift 25 lbs unassisted
* Must be able to distinguish colors
* Prior work experience in the aerospace industry. Composite airframe preferred.
* Successful experience in a fast paced prototype/design environment

If you are interested in this Avionics Technician job in Palo Alto, CA, please apply via the 'apply now' link provided.

Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.
 
Job Number: 314285
Job Location: Palo Alto, CA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/15/2021
Last Updated: 09/14/2021
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Technician IV

Description:
An Avionics Technician IV job in Louisville, CO is currently available through Belcan. In this role, you will be responsible for using your skills and expertise to repair and maintain electronic systems involved with the operation of an aircraft. You'll be responsible for moderately complex installation, testing, troubleshooting, and repairing our aircraft avionics and electrical system components and keeping our aircraft in airworthy condition. To be considered for this role, you will have a High School Diploma or GED and typically 10 or more years of relevant experience.

Avionics Technician IV Job duties:

* Ability to understand and interpret moderately complex, technical schematics, diagrams, blueprints, manuals, and/or publications; ability to route wires per technical drawings
* Advanced skills with moderately complex avionics installation tooling, wiring, wiring repair,
wiring installation, soldering' and crimping techniques

Qualifications:

* High school diploma or GED equivalent and typically 10 or more years of relevant
experience; A higher-level degree may substitute for experience; Related experience may be
considered in lieu of required education
* Familiarity with FCC and FCC GROL
* Ability to mentor and guide subordinates
* Basic understanding of spectrometer, Oscilloscope and/or Pitot static equipment
* Background in the Aerospace and Defense Industry, the US Department of Defense or US
Military

Pay Range: Up to $39/hr DOE

If you are interested in this Avionics Technician IV position in Louisville, CO please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 314642
Job Location: Louisville, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/27/2021
Last Updated: 10/04/2021
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Technician V (Shift Work Required)

Description:
An Avionics Technician V (Shift Work Required) job in Louisville, CO is currently available through Belcan. In this role, you will be responsible for using your skills and expertise to repair and maintain electronic systems involved with the operation of an aircraft. To be considered for this role, you will have a High School Diploma or GED and typically 15 or more years of relevant experience.

Avionics Technician V (Shift Work Required) Job duties:

* Leads a group through the build and test processes to support production efforts.
* Completes parts lists, checks drawings, generates and processes engineering/document change requests, notices, and/or orders and other general engineer tasking with direction from Engineers.
* Performs wiring harness routing and installation in confined spaces following specified procedures.
* Fabricates, modifies, and repairs wire harnesses; including circular and D-Sub connectors, potted connectors, and metal braid shielded harnesses per engineering documentation and required standards.
* Tests electrical assemblies by manual and automated means.

Qualifications:

* Aircraft modification or spacecraft assembly experience required.
* Ability to understand and interpret moderately complex, technical schematics, diagrams, blueprints, manuals, and/or publications; ability to route wires per technical drawings
* Advanced skills with moderately complex avionics installation tooling, wiring, wiring repair, wiring installation, soldering' and crimping techniques
* Skilled using basic hand tools, operate ground support equipment, troubleshoot electrical/electronic systems, and measuring using a variety of basic and precision measuring devices relating to job function.

Preferred:
* Familiarity with FCC and FCC GROL
* Ability to mentor and guide subordinates
* Basic understanding of spectrometer, Oscilloscope and/or Pitot static equipment
* Background in the Aerospace and Defense Industry, the US Department of Defense or US Military
* Clean room experience
* NASA 8739.4 certification and/or IPC-620 with Space Addendum
* Knowledge of reading, interpreting drawings, diagrams, and manuals; aircraft avionics/other systems; wire coding systems; avionics test equipment
* The ability to obtain and maintain a Security Clearance may be required

Pay Range: Up to $40/hr DOE

If you are interested in this Avionics Technician V (Shift Work Required) position in Louisville, CO please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 314638
Job Location: Louisville, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/27/2021
Last Updated: 10/04/2021
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Technician V (Shift Work Required)

Description:
An Avionics Technician V (Shift Work Required) job in Louisville, CO is currently available through Belcan. In this role, you will be responsible for using your skills and expertise to repair and maintain electronic systems involved with the operation of an aircraft. To be considered for this role, you will have a High School Diploma or GED and typically 15 or more years of relevant experience.

Avionics Technician V (Shift Work Required) Job duties:

* Leads a group through the build and test processes to support production efforts.
* Completes parts lists, checks drawings, generates and processes engineering/document change requests, notices, and/or orders and other general engineer tasking with direction from Engineers.
* Performs wiring harness routing and installation in confined spaces following specified procedures.
* Fabricates, modifies, and repairs wire harnesses; including circular and D-Sub connectors, potted connectors, and metal braid shielded harnesses per engineering documentation and required standards.
* Tests electrical assemblies by manual and automated means.

Qualifications:

* Aircraft modification or spacecraft assembly experience required.
* Ability to understand and interpret moderately complex, technical schematics, diagrams, blueprints, manuals, and/or publications; ability to route wires per technical drawings
* Advanced skills with moderately complex avionics installation tooling, wiring, wiring repair, wiring installation, soldering' and crimping techniques
* Skilled using basic hand tools, operate ground support equipment, troubleshoot electrical/electronic systems, and measuring using a variety of basic and precision measuring devices relating to job function.

Preferred:
* Familiarity with FCC and FCC GROL
* Ability to mentor and guide subordinates
* Basic understanding of spectrometer, Oscilloscope and/or Pitot static equipment
* Background in the Aerospace and Defense Industry, the US Department of Defense or US Military
* Clean room experience
* NASA 8739.4 certification and/or IPC-620 with Space Addendum
* Knowledge of reading, interpreting drawings, diagrams, and manuals; aircraft avionics/other systems; wire coding systems; avionics test equipment
* The ability to obtain and maintain a Security Clearance may be required

Pay Range: Up to $40/hr DOE

If you are interested in this Avionics Technician V (Shift Work Required) position in Louisville, CO please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 314641
Job Location: Louisville, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/27/2021
Last Updated: 09/20/2021
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
Inconen is looking for an Avionics Engineer for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
-Avionics and/or Electrical system development and integration experience is required.
-Experience with the FAA (14 CFR Part 25) and/or EASA (CS-25) certification is required.
-Experience with Data Concentration Networking and/or Integrated Modular Avionics is preferred.
-Understanding of DO-160, DO-178 and DO-254 processes is preferred.
-System integration lab and/or aircraft functional testing and troubleshooting experience is preferred.
-ARP-4754A experience including requirements development, validation and verification is preferred.
-Experience with IBM DOORS or other requirements management database is preferred.

Education:
-Bachelor's Degree required equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
-5 years in specific technical discipline or 10 years broad engineering experience in several technical disciplines with Bachelors.
-Experience credit considered for related adv degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.

Other Requirements
-Advanced degree in engineering related field preferred.
-The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 15265
Job Location: Savannah, GA
Rate: $68.00 - $75.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 01/11/2022
Last Updated: 01/31/2022
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
C++ Catia Developer

Description:
C++ Catia Developer

Location: Fort Worth, TX

6-12 month contract

Job ID: #61901



Citizenship Requirement: U.S. Citizenship required

Min years of experience: 5



Degree Requirements: B.Sc. Computer Science or Electrical Engineering



Responsible for migration of a wire harness routing and bundling C++ program from Catia V4 to Catia V5 API’s

Required Skills

•   Software Engineer with experience developing large complex systems

•   CATIA V5 CAA Programming experience

•   CATIA Electrical API experience

•   Minimum 5 years C++ programming experience

•   Ability to understand and solve complex problems

•   Able to read and understand existing complex code

•   Works well within Agile team framework

•   Must be able to work independently

•   Excellent verbal/written communication skills

Desired Skills

•  Electrical Harness design domain knowledge

•  Systems engineering background

•  C++ Std template library

•  CATIA V4 programming experience

•  Knowledgeable in the application of routing algorithms (graph data structure)

________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 61901
Job Location: Fort Worth, TX
Duration: 6 -12 month
Start Date: ASAP
Input Date: 09/03/2021
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Taylor McIlrath
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CFD Analyst

Description:
A CFD Analyst job in Cincinnati, OH is currently available at Belcan. This job is a full-time direct position with benefits. To be considered for this role, you will need Bachelor's Degree in Aeronautical or Aerospace Engineering or equivalent. In this job your primary responsibility is fluids analysis and modeling for gas turbine engine and space propulsion fuel system components. You will report to the Belcan Cincinnati CFD Group Leader as a key member of an integrated team to develop, optimize, integrate, deliver, and transition engineering designs to production.

CFD Analyst job duties:
* Generate and maintain ownership of component and system level CFD and thermal analytical models
* Ensure that models are systematically checked and validated.
* Maintain strong communication with internal and external customers as well as management and peers
* Grow your capabilities under the guidance and mentorship of senior team members

Minimum Qualifications:
* Bachelor's degree in Aeronautical or Aerospace Engineering
* Knowledge of turbulent fluid flow principles
* Some Computational Fluid Dynamics (CFD) analysis experience
* Due to the nature of our work US Citizenship is required
* Ability to obtain and maintain a secret clearance

Preferred Qualifications:
* Master's degree in Aeronautical Engineering
* A degree with a concentration in computational fluids analysis
* One or more years of experience in the gas turbine or space launch industry
* Prior experience with Ansys Fluent or CFX

 
Job Number: 315945
Job Location: Cincinnati, OH
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 09/04/2021
Last Updated: 01/03/2022
Firm Name: BELCAN TECHSERVICES
Attention: AnthonyDonofrio
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Machinist

Description:
Cyient is looking for a CNC Machinist to join our team in New Britain, CT. This position will be working a 3 or 4 axis mills or Lathe (horizontal or vertical).

You Will:
Plan machining by studying work orders, blueprints, engineering plans, materials, specifications, orthographic drawings, reference planes, locations of surfaces, and machining parameters; interpreting geometric dimensions and tolerances (GD&T).
Program mills and lathes by entering instructions, including zero and reference points; setting tool registers, offsets, compensation, and conditional switches; calculating requirements, including basic math, geometry, and trigonometry; proving part programs.
Sets up mills and lathes by installing and adjusting three- and four-jaw chucks, tools; indicating vices; tramming heads.
Verify settings by measuring positions, first-run part, and sample workpieces.
Maintain specifications by observing drilling, grooving, and cutting, including turning, facing, knurling and thread chasing operations; taking measurements; detecting malfunctions; troubleshooting processes; adjusting and reprogramming controls; sharpening and replacing worn tools; adhering to quality assurance procedures and processes.
Maintain safe operations by adhering to safety procedures and regulations.
Maintain equipment by completing preventive maintenance requirements; following manufacturer's instructions; troubleshooting malfunctions; calling for repairs.
Update job knowledge by participating in educational opportunities; reading technical publications.
Accomplish organization goals by accepting ownership for accomplishing new and different requests; exploring opportunities to add value to job accomplishments.

You'll Need:
2 years' experience OR Machining Certificate
Ability to set up and run machines in non production environment
Aerospace experience is a plus
Ability to program is a plus
 
Job Number: JR-025120
Job Location: New Britain, CT
Duration: Permanent Full-Time
Input Date: 09/09/2021
Firm Name: CYIENT
Attention: Gunner Dahlke
Address: 1401 NOLAN RYAN EXPY
City, State: ARLINGTON, TX 76011
Website: www.cyient.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Defense/Aerospace CNC Programmer

Description:
A CNC Programmer job is currently available at Belcan in Wichita, KS. This is a full time, direct position with Belcan and comes with full benefits. Great matching candidates will have several years of CNC Programming and hands on experience in a shop floor & assembly environment. You will be a vital team member on large and medium size programs and projects, presenting information as needed, and ensuring critical customer needs are met.

---> NOTE: Because this is a Department of Defense project, it will be necessary to have or to obtain a DoD Security Clearance. For this, US Citizenship is mandatory. If you do not have a clearance, we can obtain one for you after hire.

CNC Programmer Job Duties:
* Provide numerical control, machining, and programming technical expertise to support 4 / 5 axis machining and turning NC programs
* Develop programs from model-based definition using assigned CAM software: CATIA
* Utilize Vericut validation software for NC program
* Analyze blueprints, engineering models, and electronic controls to support NC programming
* Work with CNC machine operators to optimize or modify programs as required
* Plan, create, verify, and revise machine control data and documentation that directs the operations for numerically controlled machines
* Develop a tooling list for each program
· Assist, edit, troubleshoot, and resolve needs within the manufacturing process, various APQP processes, package and relocation support, supply chain, CNC machines and
programming, cutting tools, components and parts, unique parts, scrap, etc.

CNC Programmer Qualifications:
· Five+ years of relevant work experience as a CNC Programmer/ Manufacturing Engineer.
· Proficient CATIA knowledge; we will consider experience with other CAM software (NX)
· Experience and working knowledge of manufacturing process, assembly, and fabrication process.
· Experience with aerospace, heavy equipment, industrial equipment, and/or automotive industries.
· Experience creating and updating technical documents, reports, and standards.
· Excellent oral and written communication skills.
· Extensive understanding of product engineering concepts and applications.
· Ability to be a self-starter with potential for technical leadership and guidance.
· Strong analytical reasoning and problem-solving skills.
· Ability to communicate technical information effectively with team members, as well as to managers and engineers in client business units.

Desired but not required skills:
· Mechanical aptitude and an understanding of design for manufacturing concepts.
· Hands on experience in the shop/manufacturing environment
· Understanding of Mechanics of Materials and Structural Design.
· Knowledge of CAD Modeling (2D, 3D).
· Proficiency in MS Office products
· Experience with Cost reduction.
· Knowledge and experience with application of Six Sigma, lean manufacturing, Kaizen, etc.

If you are interested in this CNC Programmer job Wichita, KS please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.

Belcan is an equal opportunity employer. EOE/M/F/D/V
Build a challenging and rewarding career with an industry leader!

www.BELCAN.com
 
Job Number: 312574
Job Location: Wichita, KS
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/30/2021
Last Updated: 02/16/2022
Firm Name: BELCAN TECHSERVICES
Attention: KennetaFabing
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Programmer

Description:
A CNC Programmer job in Los Alamitos, CA is currently available through Belcan. In this role, you will be responsible for the managing, programming and maintenance of computer numeric controlled (CNC) equipment for prototype (first run) and production of composite parts within the facility. To be considered for this role, you will have a High School Diploma, or equivalent, plus 5-7 years of relevant experience.

CNC Programmer Job duties:

* Review electronic or written blueprints or specifications for a job
* Review and obtain proper tooling
* Program extremely close tolerance parts
* CNC program in Mastercam (2020) 3, 4, and 5 axis geometry, proving out programs prior to machining, machining of parts and tools through CNC machining on 3-axis vertical mills, Large Capacity 5-axis CNC Router, 2 axis lathe and manual machining
* Work with operators, program managers, engineers to determine project scope, schedule and important job details
* Determine methods, tooling, feeds, speeds and all other necessary requirements necessary for manufacturing of parts
* Machine composite materials including carbon, fiberglass, honeycomb, and others
* Direct or train other employees in machine setup, running, maintenance and cleaning
* On occasion, you may be asked to work irregular hours to accommodate manufacturing schedules
* Keep program managers informed of operations, problems, and opportunities as they arise
* Maintain appropriate records and documentation

Qualifications:

* Prior experience with MasterCAM programming
* Programming 3, 4 and 5 axis Mill & 2 axis Turn equipment
* Must have strong GD&T knowledge to interpret engineering drawings from sketches, determine cutting or grinding tools to be used, method of holding, and machine speeds and feeds
* Varied CNC operating experience desirable
* Must have worked in CNC programming demonstrating a high degree of proficiency
* Experience machining a variety of materials.
* Solid understanding of manufacturing processes for layup, trim, and assembly of composite hardware
* Previous experience working in a fast-paced production environment with high quality requirements; example military, aerospace or medical equipment highly preferred
* Ability to read and interpret company documents, such as safety rules, operating/manufacturing instructions, policies and procedures
* Ability to read/interpret engineering drawings and specifications
* Able to perform basic mathematics (addition, subtraction, multiplication, division)
* Ability to identify composite damages


If you are interested in this CNC Programmer position in Los Alamitos, CA please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 314467
Job Location: Los Alamitos, CA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/21/2021
Last Updated: 01/04/2022
Firm Name: BELCAN TECHSERVICES
Attention: ScottWatkins
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Certification Engineer III - Structures / Stress

Description:
CERTIFICATION ENGINEER III - STRUCTURES / STRESS
MUST BE US Citizens

Job Description:
• Generate stress and fatigue analysis on composite and metal aircraft structures using classical hand analysis and Finite Element Modeling
• Conduct static and dynamic certification tests
• Manage ground, bench, and flight test data acquisition, data reduction and analysis
• Complete FAA and foreign certification activities
• Author test proposals, test results, analysis reports, and certification reports
• Review and approve technical drawings to ensure compliance with engineering specifications and regulations

Qualifications:
• 10+ years’ applied aerospace industry experience required.
• Must have experience with FAA or EASA Part 23 and Part 25 certification.
• Applicant must be highly motivated, willing to work in fast paced environment, and have interest in aviation industry.
• Technical report writing skills to prepare test plans, test results, structural analysis substantiations, and regulatory compliance reports.
• Applicant must show general knowledge of aerospace design.
• Experience using SOLIDWORKS, FEMAP, NASTRAN, MS Excel, and MS Word.

Education:
Bachelor’s Degree or Master’s Degree in Mechanical or Aerospace Engineering.

The Structures Company LLC is an AA/EOE
 
Job Location: Sandpoint, ID
Rate: $75-85/hr DOE
Per Diem: Yes
Overtime: Possible
Duration: Long-Term
Start Date: ASAP
Input Date: 08/02/2021
Last Updated: 09/23/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Certification Engineer III - Structures/Stress

Description:
CERTIFICATION ENGINEER III - STRUCTURES

US CITIZENSHIP IS REQUIRED

Job Description:
• Generate stress and fatigue analysis on composite and metal aircraft structures using classical hand analysis and Finite Element Modeling
• Conduct static and dynamic certification tests
• Manage ground, bench, and flight test data acquisition, data reduction and analysis
• Complete FAA and foreign certification activities
• Author test proposals, test results, analysis reports, and certification reports
• Review and approve technical drawings to ensure compliance with engineering specifications and regulations
• Experience with aircraft certification projects is required. Winglet/wing experience and Part 23/25 are preferred, but not required.
• Travel will be required


Qualifications:
• 10+ years’ applied aerospace industry experience required.
• Must have experience with FAA or EASA Part 23 and Part 25 certification.
• Applicant must be highly motivated, willing to work in fast paced environment, and have interest in aviation industry.
• Technical report writing skills to prepare test plans, test results, structural analysis substantiations, and regulatory compliance reports.
• Applicant must show general knowledge of aerospace design.
• Experience using SOLIDWORKS, FEMAP, NASTRAN, MS Excel, and MS Word.
• The ability to communicate clearly and effectively within a multi-disciplinary team structure utilizing good written and spoken English communication skills is required.

Education:
Bachelor’s Degree or Master’s Degree in Mechanical or Aerospace Engineering.

The Structures Company LLC is an AA/EOE
 
Job Number: 506
Job Location: Sandpoint, ID
Rate: $80-$85/Hr. **DOE**
Per Diem: Yes
Duration: 6 Month - CtoH
Start Date: ASAP
Input Date: 09/15/2021
Last Updated: 09/23/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Electrical Systems Design Engineer - Eng. Contractor 4

Description:
Inconen is looking for a Completions Electrical Systems Design Engineer - Eng. Contractor 4 for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
Required Design responsibilities primarily involve the design and development of new and/or derivative versions of interior furnishings and amenities as part of outfitting new, custom, and in-service aircraft.

Proficient in System level Wire Diagram/Schematic design for aircraft.
Experience in Electrical System integration related to Aircraft Avionics, Lighting, and Audio/Video Entertainment systems.
Must be experienced with design tools such as Capital Harness (CHS/XC), AutoCad, or similar 2D electrical design software.
Ability to complete system level ELA (Electrical Load Analysis).
Ability to develop or decipher technical and test specifications.
Knowledge of 14 CFR 25 Subpart H - EWIS based design.
Knowledge of Catia V5.
Part 25 Certification experience for cabin interiors preferred.
Familiarity with aircraft STC procedures preferred.
Makes technical decisions and provides recommendations demonstrating leadership authority.
Ability to employ design standards consistent with company standards and accepted design methods as directed to meet the manufacturing, quality, and schedule requirements.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 15573
Job Location: Savannah, GA
Rate: $65.00 - $72.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 12/01/2021
Last Updated: 03/01/2022
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Mechanical Design Engineer - Eng. Contractor 4

Description:
Inconen is looking for a Completions Mechanical Design Engineer - Eng. Contractor 4 for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
Required Design responsibilities primarily involve the design and development of new and/or derivative versions of interior furnishings and amenities as part of outfitting new, custom, and in-service aircraft.
Proficient in Catia V5
Proficient in Smarteam
Experience designing aircraft Interior components, furnishings and Interior Installations required (e.g.: galleys, lavatories, liners, personal service units, etc.)
Experience of routing plumbing on various monuments
Electrical Harness Installation (EHI) experience also a plus.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercise’s latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 15574
Job Location: Savannah, GA
Rate: $65.00 - $72.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 12/01/2021
Last Updated: 02/24/2022
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Design Engineer

Description:
A Composite Design Engineer role located in Salt Lake City, Utah is currently available through Belcan. The Composite Design Engineer will design and validate aerospace structures, assemblies, and mechanical systems, primarily using advanced composite materials, metallics and engineered plastics. You will work cooperatively with operations to optimize the design for quality, cost, and throughput, and communicate the design and validation through CAD models, drawings, test plans, test reports and maintenance manuals.

Composite Design Engineer job duties:

* Produces innovative and intelligent designs of structures, assemblies and mechanical systems
using design specifications or department/customer guidelines and requirements. Typical
structures will be designed from advanced composite materials, engineered plastics, machined,
and welded metals.
* Specify materials, process, and parts in consideration of product certification.
* Works cooperatively with operations, manufacturing engineering, tooling engineering and
suppliers to optimize ease of manufacturing, cost, weight, and quality.
* Creates accurate 3D models/drawings and engineering data required to communicate designs to
manufacturing, suppliers and the customer.
* Creates and validates the engineering bill of material (EBOM) and maintains the design data in a
PDM system.
* Prepares engineering change notices to support manufacturing, customers, and certification.
* Recommends and plans testing to validate engineering results.
* Works with supply chain for availability, cost, and lead times for purchased parts.
* Actively participates in initial production to prevent and/or solve any engineering issues.
* Applies theoretical knowledge and engineering techniques to solve complex engineering
problems. Analyze root cause and recommend corrective actions.
* Prepares technical content for maintenance manuals and recommended spares provisioning for
airline customers.
* Point of contact for customer technical issues.

EDUCATION AND EXPERIENCE REQUIRED

* BS/BA in Degree in Mechanical Engineering, Aerospace Engineering or Equivalent (AE/CE/IE)
* Basic technical skills, theories and concepts related to the design and development of high-
performance composites structures and other mechanical systems.
* Application of CAD tools to design of composites. CATIA Composites Design (CPD) preferred.
(SOLIDWORKS and 2D AutoCAD a plus).
* Prefer Enovia LCA and Wind-chill PDM experience.
* Working knowledge of other related disciplines such as GD&T, tooling, machining, and other
composite processes.
* Experience in 3D model-based definition (CATIA FT&A preferred).
* Experience in product testing and qualification (Mechanical, environmental, system and
subscale/prototype test and development)
* Experience in material testing primarily for composites and bonded joints (ASTM/ISO)
* Experience in FAA regulations and Airline Maintenance Manuals
* Demonstrated history of creative problem solving in a team environment
* Willingness to perform 'hands-on' work in a dynamic setting
* Ability to work to provided schedules and deadlines
* Customer and operations focused
* Results driven with attention to detail.
* Good written and oral communication
* Self-motivated and engaged learner

If you are interested in this Composite Design Engineer role located in Salt Lake City, Utah please apply via the 'apply now' link provided.

Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.


 
Job Number: 315628
Job Location: Salt Lake City, UT
Rate: --
Per Diem: --
Overtime: --
Duration: JOB-CONTRACT_TYPE
Start Date: --
Input Date: 08/24/2021
Last Updated: 09/27/2021
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Configuration Manager - Level 2 / Level 3 (Secret Clearance)

Description:
Inconen is looking for a Configuration Manager - Level 2 / Level 3 (Secret Clearance) for our client, a well-known Aerospace Company, in Huntsville, AL.

** Candidates must be U.S. Citizens without Dual Citizenship **
** Candidates must have an active Secret Clearance or have had an active Secret Clearance within the last two years. **

Duties:
Working under general supervision, the selected candidate will perform assignments requiring application of Industry Configuration Management practices and principles supporting development and production environments for multiple programs.
30% - Perform configuration management duties verifying various data and status of data from Design, Product Definition and Operations.
30% - Perform validation of manufacturing bills-of-material and their attribute data.
15% - Perform verification and management of Class I and Class II engineering changes for completeness and accuracy including; configuration identification, bill-of-materials, models/CAD, relationships, and documents.
15% - Represent Configuration Data Management within cross-functional teams providing guidance and support for configuration and data management practices, principles, policies and procedures.
10% - Participate in preparation for and leadership of Configuration Control Boards.

Skills:
-Expertise and knowledge of Product Lifecycle Management (PLM) systems and processes are required.
-Experience and knowledge of PTC Windchill desired.
-Knowledge of design, development and manufacture of mechanical and electrical systems desired.
-Oracle ERP is highly preferred but not required
-Proficiency with Microsoft Office products (e.g. Word, Excel, PowerPoint) required.

Education:
-Bachelor's degree in Business Administration or related discipline and at least 2 years of related experience (or an equivalent combination of education and experience).
 
Job Number: 16846
Job Location: Orlando, FL
Rate: $45.00 - $53.85/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 12 Mos
Start Date: ASAP
Input Date: 09/07/2021
Last Updated: 10/06/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract Administration Spec 1

Description:
ur team currently has an opening for a Contracts & Pricing Representative. The Transactional Contracts & Pricing team has an open position. One position would support the Defense Logistics Agency (DLA) customer across aircraft like F/A-18, F-15, CH-47, P-8, KC-135, B-52 or B-2 which have complex proposal and execution challenges. The other position would support international or commercial customers across similar platforms.

Primary Responsibilities include:

o RFP/PPOA review, proposal pricing and development, order review, and interfacing with internal/external customers to address emerging issues.
o As a member of the Acquire organization and Program/Business Management teams, conducts and leads proposal development and negotiation and provides contracting expertise to develop and negotiate creative business solutions for new spare business.
o Represents the company to diverse customers, including U.S. Government, commercial, international and public/private institutions.
o Authorized to exercise commitment/signature authority in accordance with formal delegation to negotiate and contract for the sale or development of high performance defense and aerospace products and services (e.g., aircraft, missiles, spacecraft and launch vehicles).
o Submits offers and serves as official 'The Company' representative to the customer. Develops and/or maintains effective working relationships with customer counterparts and the next level within the customer organization.
o Provides oversight and approval of technical approaches, products and processes. Interprets contract requirements, manages change and resolves conflict.
o This position works closely with internal/external customers, Engineering, Procurement Financial Analysis, Financial Planning, Scheduling and other internal functional partners.

SKILLS/ EXPERIENCE

Adobe Experience
MS Office Experience, specifically Excel.
Experience in contracts or finance related positions which could include developing proposals or negotiating contracts preferred.

Education/experience typically acquired through advanced education (e.g. Bachelor) or an equivalent combination of education and experience (e.g. 4 years' related work experience).
 
Job Number: JPC-1359
Job Location: Hazelwood, Mo
Rate: 35HR
Per Diem: YES
Overtime: NO
Duration: 9 MONTHS
Start Date: ASAP
Input Date: 01/28/2022
Last Updated: 10/07/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: DIEGO VILLEGAS
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract Administration Specialist 1

Description:
Job Description:

Our team currently has an opening for a Contracts & Pricing Representative. The Transactional Contracts & Pricing team has an open position to support. One position would support the Defense Logistics Agency (DLA) customer across aircraft like F/A-18, F-15, CH-47, P-8, KC-135, B-52 or B-2 which have complex proposal and execution challenges. The other position would support international or commercial customers across similar platforms.

Primary Responsibilities include:

o RFP/PPOA review, proposal pricing and development, order review, and interfacing with internal/external customers to address emerging issues.
o As a member of the Acquire organization and Program/Business Management teams, conducts and leads proposal development and negotiation and provides contracting expertise to develop and negotiate creative business solutions for new spare business.
o Represents the company to diverse customers, including U.S. Government, commercial, international and public/private institutions.
o Authorized to exercise commitment/signature authority in accordance with formal delegation to negotiate and contract for the sale or development of high performance defense and aerospace products and services (e.g., aircraft, missiles, spacecraft and launch vehicles).
o Submits offers and serves as official company representative to the customer. Develops and/or maintains effective working relationships with customer counterparts and the next level within the customer organization.
o Provides oversight and approval of technical approaches, products and processes. Interprets contract requirements, manages change and resolves conflict.
o This position works closely with internal/external customers, Engineering, Procurement Financial Analysis, Financial Planning, Scheduling and other internal functional partners.

SKILLS/ EXPERIENCE:

Adobe Experience
MS Office Experience, specifically Excel.
Experience in contracts or finance related positions which could include developing proposals or negotiating contracts preferred.

Education/experience typically acquired through advanced education (e.g. Bachelor) or an equivalent combination of education and experience (e.g. 4 years' related work experience).

The individual selected for this position will be working on a project where they will contract for military spare parts and repairs, working alongside a team of 35 individuals. The ideal candidate will have a strong understanding of finance acumen, possess strong communication skills and have the ability to work both independently and collaboratively. This candidate must be adaptable to change and value diversity within the workplace. Certifications are not a requirement for this role.

Additional Info:
This position will start off as a virtual position. A hybrid schedule of both on-side and virtual will be required once restrictions are lifted. For this reason, the manager would prefer local candidates only.

Manager is wanting to scheduling interviews as soon as possible. This will be a 2 round interview, with the first round being over the phone and the second being in-person. The interview will include both experience and behavioral based questions.
 
Job Number: 46676-1
Job Location: Hazelwood, MO
Rate: $35.00
Per Diem: Split
Overtime: Possible
Duration: 9 Months
Start Date: ASAP
Input Date: 01/28/2022
Last Updated: 10/07/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Jorge Garcia
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Creo Product Definition & Verification (Checking) Designer III/IV

Description:
Inconen is looking for a Creo Product Definition & Verification (Checking) Designer III/IV for our client, a well-known Aerospace Company, in Canoga Park, CA.

** Candidates must be U.S. Citizens without Dual Citizenship **
** Secret clearance is preferred but not required **
** 10 years as a drawing and model checker for Aerospace mechanical hardware**
** Strong proficiency using GD&T per ASME Y14.5 **
** 5-10 years Creo and Windchill PLM System **

Duties:
-Under limited general direction and following established procedures in accordance with contractual requirements and company policy and procedures, this position performs engineering design assignments for preparation of engineering design documents and maintaining the design disclosure.

Typical responsibilities include:
-Prepare product definition (CAD models and drawings).
-Perform Verification of Product Definition (Checking) includes models, drawings and PLM attributes and relationships.

40% - Create, check and maintain design product definition (Models & Drawings) for engineering designs. This includes, but is not limited to, preparation of design layouts and/or preliminary conceptual design layouts, as well as outsourced design project leadership.
30% - Performs design calculations to validate any phase of design requirements.
20% - Estimation of resources and schedule required to complete a design activity and training to staff.
10% - Provide technical guidance to less senior CAD designers and to design support personnel.

Skills:
-10 years of experience with CAD systems (Creo 2.0 preferred) along with experience using CAD database management and PLM tools (Windchill preferred).
-Knowledge of Mechanical and Electrical harnessing and packaging of Aerospace hardware required.
-Expert knowledge of geometric dimensioning and tolerancing (ASME Y14.5).
-ASME Certification in GD&T is a plus.
-Ability to read and interpret product definition and related specifications.
-Electronic markup tools and the ability to work paperless is required.

Education:
-Requires a Bachelor’s degree in an appropriate discipline and at least 5 years of related experience or an equivalent combination of education.
 
Job Number: 16885
Job Location: Canoga Park, CA
Rate: $50.00 - $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 Mos
Start Date: ASAP
Input Date: 09/12/2021
Last Updated: 10/18/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Customer Account Manager

Description:
A Customer Account Manager job in Lynwood, WA or Burbank, CA is currently available through Belcan. In this role, you will be responsible for managing all commercial activities within assigned OEM customers while working cross-functionally to manager company risk and liability on both sustaining and development programs. To be considered for this role, you will have a Bachelor's degree in Business Management/Administration or relevant field of study.

Customer Account Manager Job duties:

* Successful negotiation of major business agreements (Long Term Agreements), resolving contractual disputes, executing pricing agreements, familiarity with TINA (Truth in Negotiations Act), and implementing / flowing down contract changes.
* Contract requirements flow-down (e.g. FAR, DFARS etc.) ensuring that contract requirements are known and communicated to the appropriate functional groups; monitors contract performance to assure compliance.
* Forecast sales rates and determines anticipated demand; coordinates with the Demand Management to understand specific customer or market segment requirements and aligns demand with Annual Operation Planning.
* Maintains responsibility for tracking and recovering all customer claims; facilitates efficient communication and effectively mediates customer disputes.
* Acts effectively as a customer champion and advocate; understands and communicates current and future customer needs and expectations; establishes and maintains strong relationships at all levels within the customer organization.

Qualifications:

* Minimum of five years of experience in customer business management, program management, sales & marketing or strategic partnering in an Aerospace environment.
* Strong negotiation and contract management skills.
* Customer focused with a sense of urgency. At the same time work to mitigate the risk of the business.
* Ability to understand the key metrics and put together a business case (profitability, shipping model, ROI if there is a non-recurring engineering (NRE) cost we are working under) and present at Level IV Business Committee Review.

If you are interested in this Customer Account Manager position in Lynwood, WA or Burbank, CA please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 313426
Job Location: Lynnwood, WA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 06/15/2021
Last Updated: 10/20/2021
Firm Name: BELCAN TECHSERVICES
Attention: Dee AnnVan Schaick
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Customer Support Engineer

Description:
A Customer Support Engineer job in West Palm Beach, FL is currently available at Belcan. This is a direct, full-time position with benefits. To be considered for this role, you will need a bachelors degree in a related field or equivalent work experience.


Customer Support Engineer job duties:
* Develop source data for the F135 gas turbine engine using proprietary software applications to meet engineering requirements utilizing engineering documentation and processes
* Develop maintenance procedures based upon engineering standard work requirements
* Understand and utilize engineering source data and processes
* Identify root cause(s) of issues and provide technical solutions


Qualifications:
* Minimum Bachelor of Science Degree in Mechanical, Electrical, Aerospace, Systems engineering or comparable experience
* Aptitude for computers, advanced software, and modeling/simulation applications
* Experience using Microsoft Office Suite, (i.e. Word, Excel, PowerPoint, Outlook)
* Exceptional work ethic; capacity to work well individually and as part of a team
* Motivated to learn and to be productive, and meet customer expectations with excellence
* Due to the nature of our work US Citizenship is required


Desired skills include:
* Gas turbine engine experience/familiarization in either commercial or military application
* Familiar with maintenance facilities and processes
* Knowledge of basic mechanical skills and tools.


If you are interested in this Customer Support Engineer opportunity in West Palm Beach, FL, please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.

Build a challenging and rewarding career with an industry leader!

http://belcan.com/

 
Job Number: 314675
Job Location: West Palm Beach, FL
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/27/2021
Last Updated: 01/05/2022
Firm Name: BELCAN TECHSERVICES
Attention: RobertRussell
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Data Integrity/Checker - Eng. Contractor 5

Description:
Inconen is looking for a Data Integrity/Checker - Eng. Contractor 5 for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
1. This position is in Data Integrity.
2. The contractor will be responsible for checking engineering design data for quality and conformance to Gulfstream and industry standards.
3. The successful candidate must have experience with Catia V5 and SmarTeam
4. Experience with Model Based design (MBD) and 2D design and drawing requirements is a plus

Education and Experience Requirements:
1. Bachelor's Degree in engineering or related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Thirteen (13) years specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

Position Purpose:
1. Works on engineering projects containing critical problems, the solution of which requires major technological advances and extensive related development

Principle Duties and Responsibilities:
Essential Functions:
1. Responsible for an entire engineering project of major complexity within established scope
2. Makes technical decisions and recommendations that are recognized as authoritative and have an important impact on extensive engineering activities
3. Applies advanced technical principles, theories and concepts based on broad expertise or unique specialized knowledge
4. Leads the development of innovative principles and ideas
5. Acts independently to determine improved methods and/or procedures to optimize technical product, cost and schedule requirements
6. Works under consultative direction; uses independent judgment to accomplish objectives
7. Develops standards and guides for diverse engineering activities
8. Conceives and plans investigation of broad areas of importance for which engineering precedents are lacking in areas critical to the program
9. Perform other duties as assigned

Other Requirements:
1. Advanced degree in engineering or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 16828
Job Location: Savannah, GA
Rate: $68.00 - $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 12/01/2021
Last Updated: 12/09/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer

Description:
A Design Engineer job in Tucson, AZ is currently accepting applications. This is a contract position with our key aerospace client. In this role, you will be responsible for developing engineering designs of components, assemblies, subassemblies, and subsystems. To be considered for this role, you will have a B.S. Degree in Engineering along with 2 - 5 years with system and/or hardware design and analysis experience.

Design Engineer Job Responsibilities:
* Independently develop engineering designs of components, assemblies, subassemblies, and subsystems
* Independently generate production drawings of components, assemblies, subassemblies, and subsystems
* Interface with internal customers (Design Leads, IPT Leads and Project Managers) to present technical results and/or convey challenges that must be overcome

Design Engineer Job Requirements:
* B.S. Degree in Engineering
* 2 - 5 years with system and/or hardware design and analysis experience
* Experience in one or more of the following discipline areas: Life Support System Design, Crew Systems Design, Crew Cabin Design, Mechanical Design, or Thermal Control System Design
* Knowledge of, and skills in, SOLIDWORKS CAD software to generate CAD models and production drawings per company drawing standards
* Proficiency in the understanding and use of GD&T per ASME Y14.5
* Knowledge of, and skills in, Product Data Management tools (SOLIDWORKS PDM preferred)
* Ability to conceptualize design solutions and generate CAD renderings given a limited set of requirements
* Skills in Microsoft Office applications (Excel, Word, Outlook, PowerPoint)
* Knowledge and experience with design and development of spacecraft, spacesuits, aircraft, military, or other relevant vehicles, systems, subsystems, assemblies, and/or components
* Ideally, but not required, knowledge and experience in at least one of the following discipline areas: Environmental Control and Life support Systems, Thermal Control Systems, Crew Systems, Cabin Design, Mechanical Design, Mechanical Analysis, or Thermal Analysis
* Knowledge and experience on the engineering product lifecycle, ranging from requirements development through design, manufacture, test, and operations

If you are interested in this Design Engineer job in Tucson, AZ, please apply via the 'apply now' link provided.

Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.
 
Job Number: 314854
Job Location: Tucson, AZ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/05/2021
Last Updated: 01/03/2022
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Doors & Mechanisms / Crew & Equipment

Description:
Inconen is looking for a Design Engineer - Doors & Mechanisms / Crew & Equipment for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
-Combined Engineering team responsible for Doors & Mechanisms and Crew & Equipment across all company programs including New Product Development, the current Large Cabin fleet, and Special Missions.
-This position is targeted at New Product Development.
-An Engineer on this team will be responsible for a variety of tasks developing and certifying designs within these disciplines.
-Design experience at an aircraft OEM is required.
-Catia V5 experience is required.

Preference given to candidates with experience in these areas:
Doors & Mechanisms:
• Main entry, emergency exit, landing gear, service, and access doors
• Drive mechanisms, metallic and composite structure, seals
• Ingress / egress, placarding
• Hydraulic actuators and dampers
• Kinematics

Crew & Equipment:
• Electrical equipment installations
• Flight deck layout & equipment
• Cabin insulation
• Flammability
• Component qualification
• Closeout panels and composites
• Electrical bonding
• Secondary structure including racks, trays, shelves, and bracketry

Additional experience preferred:
• Supplier design and qualification
• Gulfstream processes and procedures
• New aircraft program certification
• Real world (hands on) aircraft familiarity
• Catia V5 with Smarteam
• RTCA DO-160
• ARP4754A

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) years in specific technical discipline or 10 years broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principle Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering related field preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 16886
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 09/13/2021
Last Updated: 10/04/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Level 3 / Level 4

Description:
Inconen is looking for a Design Engineer - Level 3 / Level 4 for our client, a well-known Aerospace Company, in Canoga Park, CA.

**Candidates must be U.S. Citizens without Dual Citizenship**
** Secret Clearance not required but preferred **
** Candidates must have strong GD&T (Geometric Dimensioning and Tolerancing) experience. GD&T experience should be summarized on the candidate’s resume **
** Candidates must have significant modeling and drafting experience with Creo CAD software. Windchill experience strongly preferred.
** 10 years minimum of related experience as technical Design Engineer in rocket propulsion hardware or equivalent (pressurized systems and/or high temperature systems) and experience as technical Designer using Pro-E/Creo CAD systems **
** Knowledge in the design of bi-propellant rocket engines (high temperature combustion chambers, nozzles, injectors, valves, and other associated rocket engine hardware) is preferred **

Duties:
-Design Engineer - Must be able to create or modify designs of mechanical components and assemblies supporting propulsion hardware operating at high temperatures & pressures and in corrosive environments.
-Design of mechanical hardware that supports developing and testing new products
-Applies research to the planning design, development and testing of bi-propellant rocket combustion chambers, nozzles, injectors, valves, and other associated rocket engine hardware.
-Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo5 graphics system for liquid engine hardware.
-Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher-level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.

Skills:
-Candidates must have significant experience with Creo & GD&T.
-Higher level certifications are preferred.
-Windchill experience strongly preferred.
-Mechanical Design and development Engineer’s research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
-Engineers are also required to analyze and verify product design and performance for adequacy and reliability.
-Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
-Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
-Must be able to prepare and make presentations at both internal and customer design reviews.
-Target mechanical experience
-CREO 5 (working level experience)
-Windchill Product Lifecyle Management (PLM) experience
-Pressurized fluid systems (gas and liquid)
-High pressure systems 10,000 psi gaseous and 2000 liquid
-Machined hardware (subtractive manufacturing)
-Additive manufacturing (some…may 10%)
-Component design
-Hardware integration
-Joining methods – Welding, bolted joints, mechanical fittings
-Stainless steel tubing for fluid routing – bent tubing, orbital welding, mechanical end connections, ¼” to ¾” diameter, .027 to .035 wall thickness
-Integration - thrusters, valves (often times supplier parts), pyro valve, regulators, orifices, ancillary hardware such as machined custom brackets to off the shelf p-clamps.
-Materials – 300 series SS, Inconel, Aluminum, Titanium
-Material compatibility considerations to Hydrazine and N2O4. Helium, Nitrogen, Argon
-Experience working with integrated product teams
-Experience working with analysis teams to evaluate structural margins (to include CAD model preparation for meshing)
-Geometric Dimensioning and Tolerance Specification knowledge and practical application to include tolerance stackups
-Mechanical part selection (picking out bolts, washers, o-ring, Teflon seals, p-clamps, etc.) and preparing the geometry in the hardware under design
-Machine shop experience desired
-Precision, tight tolerance machined hardware (some tolerances down to +/- .001)
-Needs to have ability to prepare and present designs for team review
-Self starter, deadline driven

Education:
-BS degree in an Engineering field or equivalent field. MS degree is desired.
 
Job Number: 16659
Job Location: Canoga Park, CA
Rate: $65.00 - $75.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 Mos
Start Date: ASAP
Input Date: 08/31/2021
Last Updated: 09/16/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Level 3 / Level 4

Description:
Inconen is looking for a Design Engineer - Level 3 / Level 4 for our client, a well-known Aerospace Company, in Canoga Park, CA.

**Candidates must be U.S. Citizens without Dual Citizenship**
** Candidates must have strong GD&T (Geometric Dimensioning and Tolerancing) experience. GD&T experience should be summarized on the candidate’s resume **
** Candidates must have significant modeling and drafting experience with Creo CAD software. Windchill experience strongly preferred.
** 10 years minimum of related experience as technical Design Engineer in rocket propulsion hardware or equivalent (pressurized systems and/or high temperature systems) and experience as technical Designer using Pro-E/Creo CAD systems **
** Knowledge in the design of bi-propellant rocket engines (high temperature combustion chambers, nozzles, injectors, valves, and other associated rocket engine hardware) is preferred **

Duties:
-Design Engineer - Must be able to create or modify designs of mechanical components and assemblies supporting propulsion hardware operating at high temperatures & pressures and in corrosive environments.
-Design of mechanical hardware that supports developing and testing new products
-Applies research to the planning design, development and testing of bi-propellant rocket combustion chambers, nozzles, injectors, valves, and other associated rocket engine hardware.
-Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.
-Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher-level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.

Skills:
-Candidates must have significant experience with Creo & GD&T.
-Higher level certifications are preferred.
-Windchill experience strongly preferred.
-Mechanical Design and development Engineer’s research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
-Engineers are also required to analyze and verify product design and performance for adequacy and reliability.
-Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
-Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
-Must be able to prepare and make presentations at both internal and customer design reviews.

Education:
-BS degree in an Engineering field or equivalent field. MS degree is desired.
 
Job Number: 16884
Job Location: Canoga Park, CA
Rate: $60.00 - $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 Mos
Start Date: ASAP
Input Date: 11/29/2021
Last Updated: 12/01/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design/Material Compliance Engineer

Description:
Scope of Work:

Responsible for completing full material disclosures for purposes of reporting hazardous chemical content to relevant global environmental regulations and customers as necessary
Refer to the material specification, bill of material and engineering drawings to capture the relevant information (materials, Chemical finish, organic finish, finishing processes etc) to the reporting template (excel/ customer proprietary tool).
Responsible for aiding in any specific requests from customers for environmental reports or substance declarations as necessary.
Calculate volume and density of individual parts and assemblies in Catia.
Create 3d models and assemblies in Catia as required.
Update process documents as required in word/ customer proprietary tool.
Skills Required:
Read and interpret aircraft engineering drawings.
Knowledge of product finish process, manufacturing processes.
Familiarity with REACH regulations and SVHC compliance is a plus.
Working Knowledge in Catia V4/V5 /V6
Good interpersonal and communication skills.
PC proficiency in MSWord, Excel, PowerPoint, and Outlook is required.
Education:

Associate Degree in a Technical field preferred or some advanced training in lieu of degree with experience
Years of Experience: 3+ years in engineering Industry. Experience in Aerospace will be a plus.

Citizenship: US Person
 
Job Number: JR-024852
Job Location: Fort Worth, TX
Duration: Permanent Full-Time
Input Date: 09/08/2021
Firm Name: CYIENT
Attention: Gunner Dahlke
Address: 1401 NOLAN RYAN EXPY
City, State: ARLINGTON, TX 76011
Website: www.cyient.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ECS Manager

Description:
General Summary:

The ECS Manager manages the technical, cost and schedule and personnel aspects of the Environmental Control Systems (Pneumatic System, Pressurization System, Air Conditioning, Cabin Pressure Control System, Leak Detection System, Oxygen System, and Waste System) through all phases of design, development, certification, production, and product support. Ensures all aspects of design are compliant with the system requirements document.



Duties and Responsibilities:

Oversees and coordinates the ECS project activities through all phases of design, development, certification, production, and production support.
Maintains and presents to senior management the integrated project schedule and status for the Environmental Control Systems.
Tracks and reports status of action items related to design, development, certification, and flight test related for the ECS.
Prepares and maintains functional test procedures to test the ECS sub-systems as installed on the aircraft.
Prepares and maintains functional interface control document(s) that identify the integration requirements between the ECS sub-systems and the aircraft avionics / electrical power system.
Prepares and maintains regression test procedures to test the avionics/electrical power system integration of the ECS sub-systems.
Conducts regression tests to ensure that the ECS sub-systems are integrated into the avionics / electrical power system per the released requirements.
Prepares, maintains, and tracks issue reports associated with the ECS sub-systems to closure/resolution.
Provides technical and logistical assistance to manufacturing and flight test to resolve any technical issues associated with the ECS.
Prepares/reviews qualification test procedures and qualification test reports associated with the ECS.
Establishes qualification test schedules with the supplier of the ECS components and coordinates Designated Engineering Representative (DER) support.
Reviews and coordinates complex hardware / software deliverables between the supplier, HAC and the DERs.
May serve as the DER for the applicable delegations.
Supports the creation of the certification plan for the ECS.
Manages personnel by assigning and monitoring tasks so that they are done on time and are complete and accurate.
Conducts performance evaluations for personnel and creates, implements and monitors personnel development plans.












Education, Work Experience, Certification and/or Licensure:

Bachelors degree in Engineering or related field required.
8 years of leadership experience in one or more of the Environment Control Systems including: design; development: aircraft integration, and certification.


Knowledge, Skills and Abilities:

Experience in managing personnel.
Strong organizational skills.
Excellent oral and written communication skills.
Strong presentational skills.
Familiarity with aircraft/aerospace wiring practices and the ability to interpret wiring diagrams and electrical schemata.
Excellent working knowledge of Microsoft Office Suites (Word, Excel, Project Management, Lotus Notes, PowerPoint).
Strong working knowledge of DO-160, DO-178B and DO-254 processes are required,
Knowledge of aircraft communication buses such as ARINC 429 strongly preferred.
Strong working knowledge of FAA processes and procedures related to qualification testing.
Strong working knowledge of 14CFR23 or 25 and advisory circulars related to ECS regulations.
Experience in supporting manufacturing of aircraft from a technical standpoint.
Experience in preparing detailed functional test procedures.
Experience in creating Crew Alerting System (CAS) logic.
Experience in preparing/reviewing qualification test procedures for DO-160 tests required.
Experience in preparing or reviewing FAA certification plans is required.

The Structures Company LLC is an AA/EOE.
 
Job Number: 500
Job Location: Greensboro, NC
Rate: $150K **DOE**
Per Diem: No
Duration: DIRECT POSITION
Start Date: 4-6 Weeks
Input Date: 09/07/2021
Last Updated: 12/28/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Applications Engineer

Description:
Inconen is looking for an Electrical Applications Engineer for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Required Skills:
-Candidate must have in-depth knowledge of electrical harness installation and design guidance documentation (AC 43.13B, SAE AS50881, AC1701-1);
-In-depth knowledge of FAR 25 sub part H (EWIS) design requirements;
-Knowledge of EWIS component qualification requirements and documentation (EIA 364, MIL-DTL-38999, MIL-DTL-50151);
-Extensive knowledge of EWIS component selection criteria; experience with Mentor Graphics Capital Harness System (CHS) preferred

Education Requirements:
-Bachelor's Degree required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
-5 years in specific technical discipline or 10 years broad engineering experience in several technical disciplines with Bachelors.
-Experience credit considered for related adv degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.

Position Purpose:
-Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principle Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering related field preferred. 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 15311
Job Location: Savannah, GA
Rate: $66.00 - $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/18/2021
Last Updated: 02/09/2022
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
Inconen is looking for an Electrical Design Engineer for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
-Experience with Capital Logic required.
-Experience with Smarteam preferred.
-Experience with Instrumentation electrical design a plus.
-Experience with Aircraft electrical wiring diagrams a plus.
-Analog electrical design experience a plus.

Education and Experience Requirements:
-Bachelor's Degree required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
-5 years in specific technical discipline or 10 years broad engineering experience in several technical disciplines with Bachelors.
-Experience credit considered for related adv degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.

Position Purpose:
-Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services.

Principle Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
3. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering related field preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 15447
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 06/16/2021
Last Updated: 10/25/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - ECU and LRU Design

Description:
ABOUT THE JOB:
Multiple positions responsible for design of the Engine Control Unit and supporting LRU components used in a new aircraft gas turbine propulsion engine.

REQUIRED SKILLS:
• Bachelor’s degree in Electrical Engineering
• 5+ years Aerospace circuit design experience
• Control systems and/or supporting component hardware design experience
• Familiarity with the interface between an electronic controller and its supporting electro-mechanical devices
• Experience developing hardware requirements from system requirements and managing those requirements
• Engines/Propulsion, APU, or Flight Controls experience
• Schematic capture
• In-depth circuit analysis and simulation
• DOORS proficiency
• Effective communication skills (both verbal and written)
• Self-motivated, accountable, detail-oriented

PREFERRED SKILLS:
• Engine ECU and LRU familiarity

Apply to this job or any of our other openings at https://realtime.catsone.com/careers/

ABOUT THE COMPANY:
Real Time Consulting (RTC) exists to partner outstanding engineering talent to support our clients’ success. Unsurpassed service is delivered to our clients by upholding responsibility, teamwork and quality. Our primary commitment is to help our clients. Since 1997, RTC has been protecting and enhancing lives with safe, reliable, innovative solutions, providing full life-cycle design, development and testing of EMBEDDED ENGINEERING SYSTEMS and SOFTWARE SOLUTIONS with Program Management and Consulting Services. Our employees average 20+ years of versatile and accomplished expertise to our clients, driving continuous innovation forward. Employee’s innovative and analytical ideas are cultivated while maintaining the big picture vision in a fast-paced, changing environment. Our corporate values are to Uphold Responsibility, Support People, Promote Teamwork and Deliver Quality!

This position may require exposure to software, source code or technology that is subject to US export control laws and regulations (i.e., International Traffic in Arms Regulations or the Export Administration Regulations). To comply with these requirements, you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Departments of State or Commerce, as applicable.

RTCo is an Equal Opportunity Employer; employment with RTCo is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

To qualify for all positions with Real Time Companies, applicants must be legally authorized to work in the United States and should not require now, or in the future, sponsorship for employment visa status. Please be aware that Real Time Companies does not sponsor employment-based visas. Additionally, certain positions with Real Time Companies that involve work with government entities may have more restrictive employment status requirements, such as U.S. citizenship, based on security clearance requirements or other governmental requirements. Real Time Companies is an Equal Opportunity Employer M/F/D/V.
 
Job Location: Phoenix, AZ
Rate: Open
Per Diem: No
Overtime: Straight Time
Duration: TBD
Start Date: ASAP
Input Date: 08/06/2021
Last Updated: 09/24/2021
Firm Name: REAL TIME CONSULTING
Attention: Kathy Heath
Address: 20601 N 19TH AVE STE 110
City, State: PHOENIX, AZ 85027
Phone: 623/792-8946
Website: www.real-time-consulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - RF Circuits and Systems

Description:
ABOUT THE JOB:
This position is responsible for electrical design of RF and microwave circuits in TCAS and weather radar systems.

REQUIRED SKILLS:
• Bachelor’s degree in Electrical Engineering
• 7+ years RF and microwave circuits design experience
• Experience developing requirements for RF systems
• Ability to optimize and center RF circuits
• Experience with PWB layout of RF circuits
• Experience coordinating with FPGA, systems and software engineers to optimize a design
• Ability to support MOPS (minimum operational performance standards) testing and troubleshooting
• Experience supporting qualification testing and troubleshooting
• Effective Communication Skills (both verbal and written)
• Self-motivated, Accountable, Detail-oriented

PREFERRED SKILLS:
• Familiarity with one or more of the following: TCAS, transponder, DME, ground proximity warning system, and weather radar products

ABOUT THE COMPANY:
Real Time Consulting (RTC) exists to partner outstanding engineering talent to support our clients’ success. Unsurpassed service is delivered to our clients by upholding responsibility, teamwork and quality. Our primary commitment is to help our clients. Since 1997, RTC has been protecting and enhancing lives with safe, reliable, innovative solutions, providing full life-cycle design, development and testing of EMBEDDED ENGINEERING SYSTEMS and SOFTWARE SOLUTIONS with Program Management and Consulting Services. Our employees average 20+ years of versatile and accomplished expertise to our clients, driving continuous innovation forward. Employee’s innovative and analytical ideas are cultivated while maintaining the big picture vision in a fast-paced, changing environment. Our corporate values are to Uphold Responsibility, Support People, Promote Teamwork and Deliver Quality!

This position may require exposure to software, source code or technology that is subject to US export control laws and regulations (i.e., International Traffic in Arms Regulations or the Export Administration Regulations). To comply with these requirements, you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Departments of State or Commerce, as applicable.

RTCo is an Equal Opportunity Employer; employment with RTCo is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

To qualify for all positions with Real Time Companies, applicants must be legally authorized to work in the United States and should not require now, or in the future, sponsorship for employment visa status. Please be aware that Real Time Companies does not sponsor employment-based visas. Additionally, certain positions with Real Time Companies that involve work with government entities may have more restrictive employment status requirements, such as U.S. citizenship, based on security clearance requirements or other governmental requirements. Real Time Companies is an Equal Opportunity Employer M/F/D/V.
 
Job Location: Phoenix, AZ
Rate: Open
Per Diem: No
Overtime: Straight Time
Duration: 6 mo +
Start Date: ASAP
Input Date: 11/19/2021
Firm Name: REAL TIME CONSULTING
Attention: Kathy Heath
Address: 20601 N 19TH AVE STE 110
City, State: PHOENIX, AZ 85027
Phone: 623/792-8946
Website: www.real-time-consulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Test Facility

Description:
ABOUT THE JOB:
Primary job focus is design and risk mitigation of gas turbine propulsion test systems of all types and sizes, from complete test facilities to individual test benches.

REQUIRED SKILLS:
• Bachelor of Science degree in Electrical or Mechanical Engineering.
• Minimum 5 years of Electrical Engineering experience.
• Experience in industrial automation including control design and implementation.
• Minimum 2 years of Electrical drawing experience, AutoCad or AutoCad Electrical with an ability to review drawings, catch errors and provide corrective feedback on designs.
• Minimum 2 years of PLC ladder logic programming experience with experience with PLC hardware and HMI user interface screens.
• An understanding of mechanical systems, such as valves, load banks, and dynamometers.
• Ability to write Facility Control Software, solving software communication issues, designing HUE driven user screens and reducing maintenance costs through effective software architecture.
• Experience with 3-phase power and its distribution in a test facility.
• Ability to manage time, supplies, personnel, and budget to meet challenging deadlines.
• Skilled at creating accurate cost estimates and schedules for test system designs.
• Willing to work with vendors to size and select hardware.
• A skilled leader, a great listener, and someone who exercises creative thinking when designing new systems or applying innovative methods to repair existing ones.

PREFERRED SKILLS:
• Experience in the Aerospace Industry mechanical testing environment with oversight responsibilities.

Apply to this job or any of our other openings at https://realtime.catsone.com/careers/

ABOUT THE COMPANY:
Real Time Consulting (RTC) exists to partner outstanding engineering talent to support our clients’ success. Unsurpassed service is delivered to our clients by upholding responsibility, teamwork and quality. Our primary commitment is to help our clients. Since 1997, RTC has been protecting and enhancing lives with safe, reliable, innovative solutions, providing full life-cycle design, development and testing of EMBEDDED ENGINEERING SYSTEMS and SOFTWARE SOLUTIONS with Program Management and Consulting Services. Our employees average 20+ years of versatile and accomplished expertise to our clients, driving continuous innovation forward. Employee’s innovative and analytical ideas are cultivated while maintaining the big picture vision in a fast-paced, changing environment. Our corporate values are to Uphold Responsibility, Support People, Promote Teamwork and Deliver Quality!

This position may require exposure to software, source code or technology that is subject to US export control laws and regulations (i.e., International Traffic in Arms Regulations or the Export Administration Regulations). To comply with these requirements, you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Departments of State or Commerce, as applicable.

RTCo is an Equal Opportunity Employer; employment with RTCo is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

To qualify for all positions with Real Time Companies, applicants must be legally authorized to work in the United States and should not require now, or in the future, sponsorship for employment visa status. Please be aware that Real Time Companies does not sponsor employment-based visas. Additionally, certain positions with Real Time Companies that involve work with government entities may have more restrictive employment status requirements, such as U.S. citizenship, based on security clearance requirements or other governmental requirements. Real Time Companies is an Equal Opportunity Employer M/F/D/V.
 
Job Location: Phoenix, AZ
Rate: Open
Per Diem: No
Overtime: Straight Time
Duration: 12-18 months
Start Date: ASAP
Input Date: 07/30/2021
Last Updated: 09/24/2021
Firm Name: REAL TIME CONSULTING
Attention: Kathy Heath
Address: 20601 N 19TH AVE STE 110
City, State: PHOENIX, AZ 85027
Phone: 623/792-8946
Website: www.real-time-consulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Harness Installation Eng/Secondary Structure (4 needed)

Description:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Unique Skills:
• Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS.
• Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches.
• Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements.
• Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
• Aerospace Experience is required
• Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
• Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
• Knowledge of Catia V5 Electrical workbench is necessary
• Knowledge of Catia V5 Sheetmetal workbench is necessary

Education and Experience Requirements:
• Bachelor's Degree required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Essential Functions:
• Contributes to planning, developing and coordinating of important engineering projects .
• Provides specialized technical assistance to team members.
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems .
• Determines and develops own approach to solutions within schedule and cost objectives .
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives .
• Acts as liaison with representatives outside of the assigned group/area .

Additional Functions:
• Actively works to improve daily processes and ensures all work meets customer requirements .
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product .
• Perform other duties as assigned.
 
Job Number: 24-523
Job Location: Savannah, GA
Rate: $66-70/hour
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 12/06/2021
Last Updated: 02/08/2022
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Harness Installation Engineer /Secondary Structures

Description:
Contract - Electrical Harness Installation Engineer/Secondary Structures - Req# 164387 in GAC Savannah
Required Unique skills: Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches. Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.

• Aerospace Experience is required
• Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
• Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
• Knowledge of Catia V5 Electrical workbench is necessary
• Knowledge of Catia V5 Sheetmetal workbench is necessary

Bachelor's Degree required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Principle Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects .
2. Provides specialized technical assistance to team members .
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems .
4. Determines and develops own approach to solutions within schedule and cost objectives .
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives .
6. Acts as liaison with representatives outside of the assigned group/area.
Need answers to these questions for submittal to Gulfstream:
1 Why are you looking for work?_______________________
2 Are you a US Citizen ? __________________
3 Include updated resume with months and years on dates ________________________
4 Do you have any prior military experience? (Can you produce a DD-214?) ___________________
5 What is your highest level of completed education? ____________________________
6 W-2 Hourly Pay Rate request? ___________________________
7 Are you a prior Gulfstream contractor? ________________________
8 Are you able to work on site at client’s location in Savannah, GA on your own? _____________________
========
If qualified, email a WORD version copy of your resume along with your hourly PAY RATE and then
call Peggy at 774-210-4108 Referrals appreciated!!
 
Job Number: PL Elec Harness
Job Location: Savannah, GA
Rate: 70/per hour
Per Diem: Possible
Overtime: Possible
Duration: Up to 4 years
Start Date: 2-3 weeks
Input Date: 03/15/2021
Last Updated: 02/10/2022
Firm Name: ADVANCED TECHNOLOGY
Attention: Peggy Sr. Recruiter
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Harness Installation Engineer - Secondary Structures

Description:
Inconen is looking for a Electrical Harness Installation Engineer - Secondary Structures for our client, a well known Aerospace Company, in Savannah, GA.

Unique skills:
1. Required Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS.
2. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches.
3. Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements.
4. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
5. Aerospace Experience is required
6. Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
7. Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
8. Knowledge of Catia V5 Electrical workbench is necessary
9. Knowledge of Catia V5 Sheetmetal workbench is necessary

Education and Experience Requirements:
1. Bachelor's Degree required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. 5 years in specific technical discipline or 10 years broad engineering experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.

Position Purpose:
1. Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of our clients products and services

Principle Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area.

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering related field preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 15220
Job Location: Savannah, GA
Rate: $66.00 - $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 01/11/2022
Last Updated: 02/09/2022
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical-Mechanical Designer

Description:
A Designer job in Phoenix, AZ is currently available at Belcan. To be considered for this role, you will have an Associates degree in Computer Aided Design or related degree, and five to ten years of experience designing components using Creo, with previous Aerospace experience strongly preferred. In this role, you will perform design tasks to include electrical & mechanical design, drafting, and redline incorporations.

Designer Job duties:
*Create and revises complex Electrical & Mechanical design concepts, layouts, drawings by investigating and analyzing customer specific problems. Designs will include cable designs, electrical schematics, electrical interconnect drawings, electrical cable routings, electrical housing designs among other electrical/mechanical design needs.
* Assures that mechanical cable parts and assemblies will fit or interface properly within limits or allowable tolerances without interference.
* Maintains records, files, drawings, part lists, specifications, standards or other data essential to the completion of drawings as required.
* Create specifications and models for OEM customer off the shelf components for use in electrical and mechanical designs.
* Verifies own completed work checking mechanical layouts, making mathematical calculations as required using handbooks and catalogs in support of drafting calculations, materials used and quantities.

Qualifications:
*Requires Associates in Computer Aided Design, or similar degree with 2+ years of experience.
*Must have demonstrated communication and interpersonal skills ensuring positive customer relations.
*Must have demonstrated ability on AutoCAD platform to develop design concepts. Previous experience with Creo Parametric & Windchill PLM is desired.
*Knowledge of electrical design concepts with experience of integration between electrical and mechanical Designs.
*Beneficial to have knowledge of mechanical design concepts with Geometric Dimensioning and Tolerancing (GD&T).
*Beneficial to have demonstrated abilities with Creo Schematics.
*Beneficial to have demonstrated abilities with Creo surfacing.
*Beneficial to have prior leadership experience.
*Beneficial to have demonstrated abilities with Revit.

If you are interested in this Designer job in Phoenix, AZ, please apply via the 'apply now' link provided. Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

 
Job Number: 315659
Job Location: Phoenix, AZ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/25/2021
Last Updated: 02/08/2023
Firm Name: BELCAN TECHSERVICES
Attention: JosephKlont
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer

Description:
An Embedded Software Engineer role located in Mesa, AZ is currently available through Belcan. The Embedded Software Engineer will work as part of a small, collaborative product team to design, develop, integrate, and test software in embedded and enterprise secure processing solutions.

Software Engineer duties:
* Provide technical recommendations, take lead role in documentation including system level
requirement through final system performance testing.
* Modify Software to fix errors, adapt it to new hardware, improve its performance, or upgrade
interface.
* Develop and maintain software suite to verify system capabilities and requirements.
specifications.
* Participate in planning, design, scheduling, prioritizing, and tracking the project.
* Collaborating effectively with engineers from different disciplines to design an develop software
architectures and API's.
* Work cross functionally with engineering, procurement, quality assurance, program
management, etc.
* Consult with engineering staff to evaluate interface between hardware and software, develop
specification and performance requirements and resolve customer problems.
* Analyze software requirements, determine design approach & unit test requirements, and write
software design specifications.
* Architect, write, and modify, high quality software with efficient and reusable code for customer
applications. Participate in integration and acceptance testing. Verify software functionality both
in test environment as well as in the field.
* Design for and achieve required regulatory and safety certification
* Communicate ideas, objectives and plans to the software team, including presentations and
status reports to management.
* Preform test, & verification using source debuggers and simulation tools & techniques
* Deliver software solutions that meet specifications, schedule, and quality standards. Enforce
good software practices.
* Ensure that software problems are resolved in a timely manner.
* Maintain useful documentation for software engineers and the rest of the project team.

EDUCATION AND EXPERIENCE REQUIRED:

* BS in Electrical or Computer Engineering or equivalent work experience designing and
architecting software systems.
* Experience in aerospace, avionics, government projects
* Excellent Communication Skills (oral and written)
* 4 years experience developing with C/C++
* Experience with Device Drivers, RTOS (WindRiver, GreenHills), MIL-STD 1553, ARINC 429, DO-
178, FACE
* Knowledge of embedded Linux environments
* Ability to write technical documentation for requirement specifications, test plans, procedures
and reports.
* Must be a US Person

If you are interested in this Embedded Software Engineer role located in Mesa, AZ please apply via the 'apply now' link provided.

Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.


 
Job Number: 315580
Job Location: Mesa, AZ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/31/2021
Last Updated: 12/03/2021
Firm Name: BELCAN TECHSERVICES
Attention: ScottWatkins
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer

Description:
An Embedded Software Engineer role located in Redmond, WA is currently available through Belcan. The Embedded Software Engineer will develop firmware for state of are scanned laser products. This position will be responsible for a range of development activities from initial concept development, to prototype testing, through production release. A successful candidate will work in close collaboration with Digital RTL, MEMS, Electrical engineers, and software application engineers to deliver new products.

Embedded Software Engineer job duties:

* Develop firmware and embedded software across the stack from IO configuration to boot loaders
to application code for MCU, FPGA, and ASIC target
* Bring up an integration of new designs
* Design and implementation of control loops in embedded Linus and embedded real time systems
* Digital Signal Process algorithm development and optimization
* Verification testing of system performance
* Perform code reviews and provide feedback

EDUCATION AND EXPERIENCE REQUIRED

* BS or higher in Computer Science, Computer Engineering, Electrical Engineering, or related
* 2+ years of embedded software development experience
* Excellent knowledge of C and C++
* Passion for hands-on problem solving
* Proficiency in Python and/or other modern scripting and automation languages
* Familiarity with MicroC/OS or Embedded Linus
* Understanding programming/debugging real time embedded devices with ARM microcontrollers
* Knowledge of engineering best practices for the full product development lifecycle, including
design reviews, coding standards, code reviews, source control management, build processes,
and testing
* Solid communication, ability to understand complex systems and work in a fast-paced
environment
* Bootloader or Secure Boot experience a plus
* Excellent verbal and written communications skills in English


If you are interested in this Embedded Software Engineer role located in Redmond, WA please apply via the 'apply now' link provided.

Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.


 
Job Number: 315575
Job Location: Redmond, WA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/24/2021
Last Updated: 10/20/2021
Firm Name: BELCAN TECHSERVICES
Attention: FrancisOsolnick
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Eng. Contractor 3: Completions Electrical Interiors

Description:
Inconen is looking for a Eng. Contractor 3: Completions Electrical Interiors for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
1. Capitol Harness &/or Mentor Graphics experience
2. Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems preferred
3. Experience with wiring diagram creation, power distribution, lighting, switching, wire sizing and routing preferred
4. Experience with systems development, layout, and logic
5. Familiarity in mechanical system design preferred
6. Analyze Electrical designs in 3D models preferred
7. Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position

Preferred candidate will have:
1. Catia V5 basic navigation experience
2. GV, GVI, & GVII electrical system design experience
3. 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred
4. EWIS Certification familiarity & experience preferred
5. Familiarity with aircraft STC procedures preferred
6. Experience with electrical systems test plans and reports

Education and Experience Requirements:
1. Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Five (5) years in specific technical discipline or 10 years broad engineering experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.

Position Purpose:
1. Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principle Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
3. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering related field preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 15036
Job Location: Savannah, GA
Rate: $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/13/2021
Last Updated: 10/06/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Eng. Contractor 4: Completions Electrical Interiors

Description:
Inconen is looking for a Eng. Contractor 4: Completions Electrical Interiors for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
1. Capitol Harness &/or Mentor Graphics experience
2. Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems preferred
3. Experience with wiring diagram creation, power distribution, lighting, switching, wire sizing and routing preferred
4. Experience with systems development, layout, and logic
5. Familiarity in mechanical system design preferred
6. Analyze Electrical designs in 3D models preferred
7. Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position

Preferred candidate will have:
1. Catia V5 basic navigation experience
2. GV, GVI, & GVII electrical system design experience
3. 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred
4. EWIS Certification familiarity & experience preferred
5. Familiarity with aircraft STC procedures preferred
6. Experience with electrical systems test plans and reports

Education and Experience Requirements:
1. Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. 10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

Position Purpose:
1. Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

Principle Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
2. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 15037
Job Location: Savannah, GA
Rate: $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/13/2021
Last Updated: 11/16/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Eng. Contractor 4: Electrical Engineer, Completions

Description:
Inconen is looking for an Eng. Contractor 4: Electrical Engineer, Completions for our client, a well-known Aerospace Company, in Savannah, GA.

Unique Skills:
Required Design responsibilities primarily involve the design and development of new and/or derivative versions of interior furnishings and amenities as part of outfitting new, custom, and in-service aircraft.
1) Catia V5 experiences a preference.
2) 14 CFR 25 Subpart H - EWIS based design experience a must.
3) Completions electrical system design experience preferred.
4) Part 25 Certification experience for cabin interiors preferred.
5) Familiarities with aircraft cabin satellite communication (Inmarsat and Iridium), security, and entertainment systems.
6) Experience with power distribution, lighting, switching, and harness routing required.
7) Familiarity in mechanical system design; to include pneumatic supply, oxygen, water & drain, HVAC and pressure control is preferred.
8) Familiarity with aircraft STC procedures preferred.
9) Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly.
10) Makes technical decisions and provides recommendations demonstrating leadership authority.
11) Ability to employ design standards consistent with company standards and accepted design methods as directed to meet the manufacturing, quality, and schedule requirements.
12) Acts independently to determine improved methods to optimize technical product, cost, and schedule requirements.
13) Develops standards and guides for diverse engineering activities.
14) Additional responsibilities are outlined in the job description and as assigned.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 12828
Job Location: Savannah, GA
Rate: $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: Long Term
Start Date: ASAP
Input Date: 07/22/2021
Last Updated: 11/16/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Administrator

Description:
An Engineering Administrator role located in Kirkland, WA is currently available through Belcan. The Administrative Assistant will help offload support work for an Engineering department.

Engineering Administrator job duties:

Skills and abilities in order of importance with most important skills/abilities listed first:
* Create custom Excel spreadsheet based on team needs, enter data and publish reports as
required
* Create document templates in MSWord, enter technical content from engineering, and publish or
release as required. Review and update existing documents.
* Support the release of documents/drawings into the production configuration management tool.
* Support updates and maintenance of SharePoint sites for engineering team.
* Create and update PDF files
* Assist with preparation of design review presentations using PowerPoint
* Develop methods to track movement of development hardware using Microsoft Office tools.
* Support the creation of proposal documentation

EDUCATION AND EXPERIENCE REQUIRED:

* 3 years' experience and proficiency in the utilizing desktop tools/applications: - Word, Excel (must have V-Lookup experience), PowerPoint, Adobe, SharePoint, OneNote
* Associates degree with two years of administrative experience supporting an engineering department or High School diploma and six years of experience supporting an engineering department.
* Very strong verbal and written communication skills
* Ability to work with a large team, and self-manage workload to meet customer requirements
* Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder), or
lawfully admitted into the U.S. as a refugee or granted asylum.

If you are interested in this Engineering Administrator role located in Kirkland, WA please apply via the 'apply now' link provided.

Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.



 
Job Number: 314989
Job Location: Kirkland, WA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/05/2021
Last Updated: 09/27/2021
Firm Name: BELCAN TECHSERVICES
Attention: Dee AnnVan Schaick
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Technician 3

Description:
An Engineering Technician 3 role located in Kirkland, WA is currently available through Belcan. The Engineering Technician 3 will perform complex technical tasks to assist engineers with electronic systems and technical activities relating product development. Must possess excellent test and troubleshooting skills, and independent judgment.

Engineering Technician 3 duties:

* Support engineering activities such as, test, check-out, modification, fabrication and assembly of
prototype electro mechanical systems, experimental design circuitry, or specialized test
equipment.
* Assemble, test, and debug test fixtures and informal test procedures.
* Perform calibration checks on electronic instruments; troubleshoot an electronics system to
determine cause and remedy for malfunctioning.
* Work from schematics, diagrams, written and verbal descriptions, layouts or defined plans to
perform testing, checkout and trouble-shooting functions with minimum supervision.
* Perform compliance testing to industry and customer-defined requirements on new and legacy
electromechanical devices.
* Use manufacturing, test, development or diagnostic equipment, including, but not limited to,
test programs, oscilloscopes, signal generators and specialized test apparatus.
* Provide work leadership to lower level technicians.
* Perform other duties as assigned.

EDUCATION AND EXPERIENCE REQUIRED

* Associate's degree (AS) in Electronics Technology or related field/ equivalent electronics military
schooling and experience required.
* Aptitude in aircraft power electronics testing and troubleshooting, especially DO-160 qualification
testing.
* Aptitude and experience in board level testing and component level troubleshooting, repair, and
rework.
* Experience in using computer based tools and procedures to perform, document, and track
testing.
* Must have experience with power supplies and logic systems.
* Excellent test and troubleshooting skills and independent judgment.
* Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder), or
lawfully admitted into the U.S. as a refugee or granted asylum.

If you are interested in this Engineering Technician 3 role located in Kirkland, WA please apply via the 'apply now' link provided.

Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 313811
Job Location: Kirkland, wa
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 06/30/2021
Last Updated: 09/15/2021
Firm Name: BELCAN TECHSERVICES
Attention: ScottWatkins
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Technician III

Description:
An Engineering Technician III job in Louisville, CO is currently available through Belcan. In this role, you will be responsible for assembling basic to complex cables and harnessing, including crimping, stripping, and testing. To be considered for this role, you will have a High School Diploma or equivalent and typically 5 years of relevant experience.

Engineering Technician III Job duties:

* Responsible for validation of test cables and break-out boxes.
* Completes parts lists, checks drawings, generates and processes engineering/document change requests, notices, and/or orders and other general engineer tasking with direction from Engineers.
* Utilizes standard manufacturing tools including: torque wrenches, calipers, heat guns, scales etc.
* Understands, plans and executes testing and troubleshooting activities in accordance with company policies, procedures, work instructions and specific customer requirements.

Qualifications:

* Ability to assemble basic to complex cables and harnessing, including crimping, stripping and testing.
* Ability to maintain a current certification in the IPC/WHMA-A-620 (Requirements and Acceptance for Cable and Wire Harness Assemblies).
* Ability to work with various test equipment including DMMs, Hi-Pot testers, power supplies and others.
* Ability to work with small delicate hardware under magnification.

Pay Range: Up to $34/hr DOE

If you are interested in this Engineering Technician III position in 'CITY, STATE' please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.


 
Job Number: 314058
Job Location: Louisville, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/08/2021
Last Updated: 09/20/2021
Firm Name: BELCAN TECHSERVICES
Attention: ScottWatkins
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Technician III

Description:
An Engineering Technician III job in Louisville, CO is currently available through Belcan with one of our Space clients. You will be responsible you will be using your skills and expertise to perform a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. You'll be responsible for constructing, troubleshooting, calibrating, testing, and maintaining our equipment, components, devices, or systems. You'll ensure our systems and components meet established specifications. Six years of experience is required with an Associates Degree in a related field of study.

Engineering Technician III Job duties:
* Use your skills and expertise to perform a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. You'll be responsible for constructing, troubleshooting, calibrating, testing, and maintaining our equipment, components, devices, or systems.
* Ensure systems and components meet established specifications.
* Executes building and testing of flight hardware along with troubleshooting activities in accordance with established policies, procedures, work instructions and specific customer requirements.
* Completes parts lists, checks drawings in accordance with released engineering.
* Work includes, but is not limited to, dismantling, repairing, fabricating, assembling and erecting structural components for GSE and flight hardware.
* Assists as required during inspection verification or modification/maintenance procedures.

Qualifications:

* 6 years of relevant experience.
* Associates Degree in related field of study.
* Higher level degree may substitute for experience.
* Related experience may be considered in lieu of required education.
* Ability to read and understand mechanical and electrical drawings, diagrams, schematics, and manuals.
* Ability to work with standard laboratory test equipment, other measurement equipment, hand tools, and power tools.
* Experience supporting an Aerospace and Defense Industry.
* Previous experience in a manufacturing environment.

Preferred:
* Previous experience and/or certifications within the aerospace and defense industry
* Previous experience in a manufacturing environment
* Experience with AutoCAD or other 3-D CAD software

Pay Range: Up to $34/hr DOE

If you are interested in this Engineering Technician III job in Louisville, CO, please apply via the 'apply now' link provided.  Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.
 
Job Number: 314682
Job Location: Louisville, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/27/2021
Last Updated: 09/20/2021
Firm Name: BELCAN TECHSERVICES
Attention: FrancisOsolnick
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Technician III

Description:
An Engineering Technician III job in Louisville, CO is currently available through Belcan. In this role, you will be responsible for constructing, troubleshooting, calibrating, testing, and maintaining equipment, components, devices, or systems. To be considered for this role, you will have an Associate's degree and typically 6 years of relevant experience.

Engineering Technician III Job duties:

* Executes building and testing of flight hardware along with troubleshooting activities in accordance with established policies, procedures, work instructions and specific customer requirements
* Completes parts lists, checks drawings in accordance with released engineering
* Work includes, but is not limited to, dismantling, repairing, fabricating, assembling and erecting structural components for GSE and flight hardware
* Assists as required during inspection verification or modification/maintenance procedures
* Has experience in fabrication work including metal, aluminum, composite and plastics
* Has basic knowledge of cutting, drilling and repair work
* Experience in two part compounds and bonding processes
* Experience with overhead cranes, gantries and powered industrial equipment
* Has mechanical assembly experience
* Understands the use of basic measuring tools (calipers, micrometers, height gages)
* Proficient in MS Office Suite
* Experience working in MRP
* Extensive hand tool experience
* Ability to read and follow complex written instructions

Qualifications:

* Associate's degree in a related field of study and at least 6 years of relevant experience
* Ability to read and understand mechanical and electrical drawings, diagrams, schematics, and manuals
* Ability to work with standard laboratory test equipment, other measurement equipment, hand tools, and power tools

Pay Range: Up to $34/hr DOE

If you are interested in this Engineering Technician III position in Louisville, CO please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.


 
Job Number: 314623
Job Location: Louisville, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/24/2021
Last Updated: 09/20/2021
Firm Name: BELCAN TECHSERVICES
Attention: ScottWatkins
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Technician III

Description:
An Engineering Technician III job in Louisville, CO is currently available through Belcan with one of our Space clients. You will be responsible you will be using your skills and expertise to perform a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. You'll be responsible for constructing, troubleshooting, calibrating, testing, and maintaining our equipment, components, devices, or systems. You'll ensure our systems and components meet established specifications. Six years of experience is required with an Associates Degree in a related field of study.

Engineering Technician III Job duties:
* Use your skills and expertise to perform a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. You'll be responsible for constructing, troubleshooting, calibrating, testing, and maintaining our equipment, components, devices, or systems.
* Ensure systems and components meet established specifications.
* Executes building and testing of flight hardware along with troubleshooting activities in accordance with established policies, procedures, work instructions and specific customer requirements.
* Completes parts lists, checks drawings in accordance with released engineering.
* Work includes, but is not limited to, dismantling, repairing, fabricating, assembling and erecting structural components for GSE and flight hardware.
* Assists as required during inspection verification or modification/maintenance procedures.

Qualifications:

* 6 years of relevant experience.
* Associates Degree in related field of study.
* Higher level degree may substitute for experience.
* Related experience may be considered in lieu of required education.
* Ability to read and understand mechanical and electrical drawings, diagrams, schematics, and manuals.
* Ability to work with standard laboratory test equipment, other measurement equipment, hand tools, and power tools.
* Experience supporting an Aerospace and Defense Industry.
* Previous experience in a manufacturing environment.

Preferred:
* Previous experience and/or certifications within the aerospace and defense industry
* Previous experience in a manufacturing environment
* Experience with AutoCAD or other 3-D CAD software

Pay Range: Up to $34/hr DOE

If you are interested in this Engineering Technician III job in Louisville, CO, please apply via the 'apply now' link provided.  Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.
 
Job Number: 314683
Job Location: Louisville, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/27/2021
Last Updated: 10/04/2021
Firm Name: BELCAN TECHSERVICES
Attention: FrancisOsolnick
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Entry Level Structural Analyst

Description:
An Entry Level Structures Engineer in Lexington, KY OR Cincinnati, OH is currently available at Belcan. As an Entry Level Structures Engineer, you will evaluate, select, and apply standard engineering techniques, procedures, and criteria to solve problems.  Entry Level Structures Engineers work on interdisciplinary teams to support the design and analysis of a wide variety of aerospace components during the concept, design, and production phases as well as any modification efforts.
 
Principal Responsibilities for an Entry Level Structures Engineer include but not limited to the following:
· Perform structural analyses using Finite Element Analysis (FEA) as well as classical hand stress analysis methods
· Perform structural, modal, and fatigue assessments
· Participate in analysis of new designs and modifications of existing designs
· Create structural analysis result summary presentations and reports
· Interact with Belcan's customers
Requirements for the role include:
· Bachelor of Science degree in mechanical or aerospace engineering from an accredited institution
· 0-1 years of experience
· Proficiency with Microsoft Office products
· Good communication skills
· Ability to work in a team
· Important knowledge and experience needed for this role includes:
o Interest in aviation and aerospace applications
o Exposure to finite element software and analysis
o Understanding of fundamental  hand calculations for stress analysis
o Ability to learn new tools and concepts quickly
o Experience writing analysis reports
o Experience making presentations in front of small audiences
· Due to the nature of the work, all new hires for this position must be U.S. Citizens

Desired skills include:
· Proficiency in Finite Element Analysis software (FEMAP/PATRAN/Hypermesh/ANSYS)
· Aptitude for writing small computer programs (macros)
· Strong time management skills
· Experience/Internship as a Structures Engineer is a plus, preferably in the aerospace industry

 
Job Number: 316213
Job Location: Lexington, KY
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 09/14/2021
Last Updated: 10/11/2021
Firm Name: BELCAN TECHSERVICES
Attention: AnthonyDonofrio
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FPGA Electrical Engineer

Description:
A FPGA Electrical Engineer job is currently available at Belcan in Lexington, KY. This is a full time, direct job with full benefits. Great matching candidates will have a Bachelor's Degree in Electrical Engineering (or similar), with at least five years of experience with FPGA design & programming. You will be participating in FPGA design from requirements development to hardware implementation for the aerospace and defense markets.

FPGA Electrical Engineer job duties:
* Program requirements decomposition, analysis, definition, and traceability using tools such as DOORS or equivalent.
* Program requirements verification (acceptance test plans, test reports, analysis reports, inspection reports) and validation for regulatory approval (example: avionics certifications using DO-254).
* Support hardware requirement generation with systems and subsystems teams to determine meaningful and testable requirements for the design, preferably in a model-based system engineering environment (MBSE).
* FPGA programming/development in Verilog/VHDL/System Verilog.
* Assist in electrical design and development, PCB Design and layout, wiring/harnesses, performance, risk, safety, operation and design reviews.
* Electrical Hardware in loop testing.

Qualifications:
* Bachelor of Science Degree in Electrical Engineering, Computer Engineering, or related STEM field.
* Five to 10 years' experience focused on FPGA development or electrical/hardware development/integration (preferably within the aerospace software/systems, power systems, or complicated technical systems area)
* Required experience in Verilog/VHDL/System Verilog
* Familiarity with design/analysis of electrical systems for EMI/EMC compliance
* Atlassian tools experience (JIRA, Confluence, Git)
* Experience in LINUX / RTOS (including Red Hat)
* Scripting, Programming and Analysis: TCL, Python, Linux shell and Windows batch scripting; C / C++; MATLAB / Simulink, Rhapsody CAMEO MagicDraw, Python, HSPICE and HFSS (or similar modeling/analysis tools)
* Legal authorization to work in the US required: US Citizenship due to nature of the work
Desired but not required:
* Regulatory experience preferred: DO-254, DO-160, Mil 704, 461, 464 or similar automotive standards
* Ability to deal with ambiguity, to be adaptable, to work across multi-discipline teams, solve complex problems and to drive results

If you are interested in this FPGA Electrical Engineer job in Lexington, KY please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.

Belcan is an equal opportunity employer. EOE/M/F/D/V

Build a challenging and rewarding career with an industry leader!

www.BELCAN.com

 
Job Number: 312292
Job Location: Lexington, KY
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 05/06/2021
Last Updated: 10/18/2021
Firm Name: BELCAN TECHSERVICES
Attention: KevinGesner
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FPGA/ASIC Designer - Secret Clearance Required

Description:
FPGA/ASIC Designer - Secret Clearance Required

Location: Orlando, FL & Remote

Job ID: #62072



Citizenship Requirement: U.S. Citizen

Security Clearance Level:  Secret with background investigation in last 6 years (S-6)

Min years of experience:

11 with B.Sc. or 9 with M.Sc.

Degree Requirements: B.Sc. in Electrical Engineering or Computer Engineering



Develops, designs, verifies, and documents Application-Specific Integrated Circuits (ASIC) and Field Programmable Gate Arrays (FPGA) development. Determines architecture design, logic design, and system simulation. Assignments include the analysis of all aspects from high-level design to synthesis, place and route, and timing and power utilization. Typically uses specialized equipment to establish operation data, conduct experimental tests, and evaluate results.



Seeking Electrical Engineer with DFT (Design for Test)/ DFD (Design for Debug) / DFM (Design For Manufacture) experience. The successful candidate will be responsible for the design, implementation, and verification of DFT/DFD/DFM, as well as mentoring and growing talent in the discipline. This individual will be considered a Subject Matter Expert (SME) in techniques such as Scan, MBIST/MBISR, Boundary Scan, ATPG, Logical Equivalence Checking, and Gate Level Simulation.



Successful candidate will work with the digital design and physical implementation teams to capture DFT requirements, develop and implement DFT architecture, work with the verification team to verify DFT implementations, generate structural test vectors, analyze and improve coverage/test time/test cost, work with designers on Static Timing Analysis (STA), physical, power and logical issues impacting DFT, work with Integration & Test as well as Foundry representatives to bring up test vectors on silicon, and develop and execute schedules related to these tasks.



Typical Minimums:

Bachelors degree from an accredited college in a related discipline, or equivalent experience/combined education, with 14 years or more of professional experience; or 12 years of professional experience with a related Masters degree. Considered an expert, authority in discipline.



Basic Qualifications:

• Secret plus 6 year background investigation (S-6)

• Bachelor’s Degree in Electrical Engineering or Computer Engineering with 11+ years of professional DFT experience or 9+ years of experience with a related Masters degree

• Industrial standards and practices in DFT, including ATPG, JTAG, MBIST/MBISR and trade-offs between test quality and test time

• Developing DFT specifications

• Industry standard DFT and design tools

• Debugging ATPG/MBIST patterns

• STA constraints and their interaction with DFT



Desired Skills:

• Experience with Synopsys or Cadence DFT tools

• Experience with JTAG and IEEE standards 1149.1 and 1149.6.









____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 62072
Job Location: Orlando, FL
Per Diem: Possible
Start Date: ASAP
Input Date: 09/02/2021
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: David Surreira
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fatigue and Damage Tolerance Engineer

Description:
Inconen is looking for a Fatigue and Damage Tolerance Engineer for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
-Fatigue and Damage tolerance experience required on primary and secondary airframe metallic structure
-Strong background in: Classic Stress Analysis; Splice Analysis; Fatigue Spectrum Development/Generation; Kt evaluation; Fatigue Analysis; Damage Tolerance Analysis
-Experience with SmarTeam & Catia V5 to support stress analysis and drawing release.
-Ability to write and review technical documents and reports.
-Experience with GAC F&DT methods and tools is preferred.
-Experience with Patran/Nastran, Abaqus, StressCheck is preferred.
-Experience with VBA & Python is preferred.
-Testing experience including correlation of test results to analysis, determining root cause of any failures, and identifying required corrective action, is preferred.

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) years in specific technical discipline or 10 years broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Principle Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering related field preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 16639
Job Location: Savannah, GA
Rate: $70.00 - $77.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 07/28/2021
Last Updated: 11/29/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Financial Operations Support

Description:
A Financial Operations Support job in Cincinnati, OH is currently available through Belcan.? To be considered for this role, you will need five years of experience with Industry financial systems to offer financial support for programs and projects for our customer and the military.? In this role, you will need to have a strong aptitude for manipulating data in Excel and thorough understanding of finance.

Job duties:
? Support the AEO team with engineering resource planning for the 2nd half of 2021.
? Receive, review and organize actual spend data from finance from the 1st half of 2021 and ongoing monthly spend.
? Receive, review and organize the various Section Leaders' input and re-forecasting for manpower for the AEO Engineering operations.
? Work with data from the Spotfire and Clarity financial data systems and manipulate into the Excel spreadsheet planning.
? Review and map the manpower forecast planning for the various AEO programs.
? Produce the reports/presentations required to review internally and externally with the AEO customers.
? Help summarize and review action plans from the various Section Leaders to address financial goals for AEO.
? Attend meetings (as required).

Job Requirements:
? Bachelor's degree in?Finance or equivalent experience
? Must have experience with industry financial software
? A strong aptitude for manipulating data in Excel and thorough understanding of finance
? Legal authorization to work in the U.S. is required/U.S. Citizen only

Preferred Skills:
? Level of education required BA or equivalent experience
? Working knowledge of Aerospace / Engineering operations is preferred
? Years of experience Minimum 5 years hands on experience supporting financial tracking needs for a large # of employees
? Degree or education background BA or equivalent experience
Must have software skills: Clarity is not a must but 'would be nice to have'. Working knowledge of some GE Finance Systems is preferred (i.e., Clarity PPM using Rego Excel, Spotfire, Oracle Centerpiece, MS Excel, I-Procurement, Microsoft Project, SAP etc.)


 
Job Number: 315269
Job Location: Cincinnati, OH
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/13/2021
Last Updated: 09/24/2021
Firm Name: BELCAN TECHSERVICES
Attention: ColleenMinello
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Instrumentation Engineer - SW Developer

Description:
Inconen is looking for a Flight Test Instrumentation Engineer - SW Developer for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
1. Experience developing software programs in any of the following languages: Python, JavaScript, Java, C#, C, or C++
2. Experience developing graphical user interfaces
3. Strong communication skills
4. Ability to develop and test prototype applications on flight test hardware to validate designs

Education and Experience Requirements:
1. Bachelor's Degree Engineering or related curriculum required or equivalent combination of education and experience sufficient to perform the essential functions of the job. Entry level. 0 to 18 months experience.

Position Purpose:
1. Performs engineering work related to the investigation and solution of basic problems associated with research, design, development, service and manufacture of company aircraft.

Principle Duties and Responsibilities:
Essential Functions:
1. Provides technical assistance to engineering staff and contributes by completing discrete engineering tasks on schedule
2. Using company procedures, applies engineering knowledge to resolve routine issues
3. Analyzes and evaluates results of project activities
4. Prepares recommendations for changes and compiles necessary reports for various department supervision
5. Recognizes discrepancies and/or problems with analysis/test results and works toward corrective action

Additional Functions:
1. Actively works to improve daily processes, and ensures all work meets customer requirements
2. Continues learning and developing knowledge of application of technical principles, theories, and concepts in assigned field of expertise
3. Perform other duties as assigned.

Other Requirements:
1. The level of technical skills and abilities appropriate for this grade level will be established by each discipline.
2. Work is closely supervised/monitored, follows established procedures and methods.
3. Failure to achieve results may cause delays in program schedules.
4. Ability to convey technical concepts in both written and verbal formats.
5. Contacts are primarily with direct supervisor, mentor, and other exempt professionals in the group or department.
6. Works under general supervision for most tasks.
 
Job Number: 15375
Job Location: Savannah, GA
Rate: $30.99 - $40.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 12/01/2021
Last Updated: 12/21/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Mechanical Design Engineer

Description:
Inconen is looking for a Flight Test Mechanical Design Engineer for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
Flight Test Mechanical Design Experience Required
Smarteam Experience Required
CATIA V5 Experience Required
MRB Experience Preferred
Gulfstream Experience Preferred

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercise’s latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 15580
Job Location: Savannah, GA
Rate: $70.00 - $75.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 10/18/2021
Last Updated: 12/21/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fly by Wire Control Law Design Engineer - Eng. Contractor 3

Description:
Inconen is looking for a Fly by Wire Control Law Design Engineer - Eng. Contractor 3 for our client, a well-known Aerospace Company, in Savannah, GA.

Unique skills required:
1. This position requires a candidate with work experience in augmented air vehicle control system design, simulation and analysis using state of the art techniques in linear and non-linear modeling and analysis.

A Control Law Engineer will:
1. Establish requirements for control systems functionality, integrity, availability and performance to ensure flight safety and Part 25 certification.
2. Support design and analysis for fly-by-wire primary and automatic flight control laws.
3. Develop, document, and inspect fly-by-wire control law models for the purposes of flight dynamics analysis.
4. Conduct, analyze the results and document simulation laboratory tests of the fly-by-wire primary and automatic flight control laws.
5. Support flight test activities, including validation and verification of control law design troubleshooting/revising control laws as required.
6. Qualified Candidates will have experience with augmented airplane control law design, modeling, and analysis along with MATLAB & Simulink fluency.

The Preferred candidate will have:
1. Knowledge of stability and control and application of handling qualities criteria to control system design.
2. Experience with 14 CFR Part 25 certification.
3. Use of IBM DOORS.
4. Experience working with ARP4754A, DO-178B.
5. Requirements Development Experience

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) years in specific technical discipline or 10 years broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Principle Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering related field preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 12900
Job Location: Savannah, GA
Rate: $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 12/01/2021
Last Updated: 01/06/2022
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
GNC/Altitude Determination and Control Lead - Direct hire $155k - $170k

Description:
Work locations available are: (Los Angeles, TX, Huntsville AL, FL, WA)

GNC Expert, either Algorithm Expert or H/W sensors expert who has lived through a program.

Job Description
As part of a hardworking team of diverse spacecraft development engineers, you will lead the development and delivery of the Attitude Determination and Control Subsystem (ADCS) for an advanced spaceflight vehicle. Your responsibilities will include synthesis of algorithms, creation of flight software, derivation and development of subsystem requirements, performing analyses and trade studies, and supporting the full lifecycle of ADCS design through flight completion.

We are looking for someone to apply their technical expertise, leadership skills, and commitment to quality to positively impact safe spaceflight. Passion for our mission and vision is required!

Responsibilities:
•Lead development team including Software/Algorithm development, 6 DOF simulation, sensor selection (Star trackers, sun sensors, GPS, IMUs), reaction wheel sizing and selection, ADCS analysis and architecture, and flight autonomy
•Lead technical team of experienced analysts, system engineers, software, and hardware engineers
•Responsible for cost & schedule execution, vendor selection and vendor management
•Lead HIL support and support integration of algorithms into flight SW
•Lead and perform analyses, simulations, and tests (including component and hardware-in-the-loop) to verify component and subsystem specifications and requirements
•Lead development of verification and validation plans to ensure software and hardware components, and the integrated subsystem will perform as specified to meet system and subsystem requirements
•Provide technical direction and oversight to development of sensor solutions by suppliers
•Manage technical risks for the subsystem, develop and execute mitigation plans
•Support the integrated product manager for updates to schedule, resources, cost, and risks
•Lead subsystem gated reviews, and support program reviews
•Lead on-vehicle functional testing and flight demonstration testing of the subsystem

Qualifications:
•B.S. degree in Aerospace engineering with at least 10 years of design experience
•Experience in development and analysis of algorithms
•Experience in leading the full development lifecycle of subsystem on at least one aerospace program. Will take someone that is technical with the ability to do this as long as they have a little exp leading.
•Solid system engineering and configuration management skills
•Excellent written and verbal communication skills
•Highly organized and capable of planning and guiding complex technical work
•Ability to execute in a dynamic, fast-paced, and driven work environment
•Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.

Desired:
•M.S. or Ph.D. in Aerospace engineering
•Demonstrated experience with MATLAB and Simulink and associated auto coding practices
•Demonstrated experience in development and testing of navigation sensors and control actuators
•Demonstrated experience in implementation and testing of software and hardware
•Demonstrated advanced knowledge in the development of planetary spacecraft systems
 
Job Number: R9831
Duration: Direct Hire
Input Date: 09/08/2021
Last Updated: 01/18/2022
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic Avellino
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer - Contract - Aerospace Industry Experience a MUST

Description:
This Industrial Engineer position provides technical support for the Production Engineering Group working in areas such as manufacturing, design, development, and testing.
MUST have 6+ years in the aerospace/aircraft industry.

Duties and Responsibilities:
1. Leading process optimization efforts to address specific business requirements and to eliminate waste from assembly processes.
2. Supporting Production Engineering projects and initiatives with a focus on reducing costs, improving quality, and improving customer satisfaction.
3. Implementing productivity improvements.
4. Working with cross functional teams to develop best practice solutions.
5. Utilizing a wide range of Industrial Engineering, Lean, and Six Sigma tools and techniques to make process improvements.
6. Implementing mistake-proofing controls to maintain or improve process quality.
7. Conducting root cause analyses to address specific process or quality problems.
8. Working with Production Engineering teams to identify potential projects, assess feasibility, and implement solutions.
9. Performing Time Studies to understand processes and performance metrics.
10. Documenting processes using process mapping and value stream mapping.
11. Utilizing Lean and Six Sigma tools to lead and execute process improvement projects.
12. Designing facility layout alternatives.

Education, Work Experience, Certification and/or Licensure:
Bachelor’s Degree (Manufacturing, Manufacturing Engineering, Industrial Engineering, Aerospace Engineering, Industrial Technology, or equivalent technical major).
Minimum 6 years’ aerospace industry experience in aerospace manufacturing, planning, testing and fabrication.
Six Sigma training, LEAN manufacturing process knowledge, and process improvement skills are highly preferred.
CATIA and AutoCAD experience is a plus.
Knowledge of design/drafting practices, design for manufacturability, GD&T, and proficiency in reading/understanding mechanical drawings.
Strong analytical skills coupled with a creative and open mind towards alternative methods.

Knowledge, Skills and Abilities:
Strong analytical and innovative skills.
Strong work ethic.
Ability to multitask.
Ability to work under minimal supervision.
Detail oriented.
Excellent problem solving skills.
Ability to read and interpret engineering drawing and/or specification requirements.
Excellent communication skills, both verbal and written.
Excellent presentation skills.
Strong working knowledge of Microsoft Office Suites (Word, Excel, PowerPoint, and Lotus Notes).
Knowledgeable of various manufacturing principles, engineering practices, mathematics, materials, and physical sciences to review detailed designs and drawings.

The Structures Company LLC is an AA/EOE.
 
Job Location: Greensboro, NC
Rate: $45-60/hr DOE
Per Diem: Yes
Overtime: Possible
Duration: Long-term
Start Date: ASAP
Input Date: 07/28/2021
Last Updated: 01/26/2023
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer - Direct Position

Description:
General Summary:

The Industrial Engineer position provides technical support for the Production Engineering Group working in areas such as manufacturing, design, development, and testing.

Duties and Responsibilities:

1. Leading process optimization efforts to address specific business requirements and to eliminate waste from HACI assembly processes.

2. Supporting Production Engineering projects and initiatives with a focus on reducing costs, improving quality, and improving customer satisfaction.

3. Implementing productivity improvements.

4. Working with cross functional teams to develop best practice solutions.

5. Utilizing a wide range of Industrial Engineering, Lean, and Six Sigma tools and techniques to make process improvements.

6. Implementing mistake-proofing controls to maintain or improve process quality.

7. Conducting root cause analyses to address specific process or quality problems.

8. Working with Production Engineering teams to identify potential projects, assess feasibility, and implement solutions.

9. Performing Time Studies to understand processes and performance metrics.

10. Documenting processes using process mapping and value stream mapping.

11. Utilizing Lean and Six Sigma tools to lead and execute process improvement projects.

12. Designing facility layout alternatives.



Education, Work Experience, Certification and/or Licensure:

Bachelor’s Degree (Manufacturing, Manufacturing Engineering, Industrial Engineering, Aerospace Engineering, Industrial Technology, or equivalent technical major).
Minimum 6 years’ aerospace industry experience in aerospace manufacturing, planning, testing and fabrication.
Six Sigma training, LEAN manufacturing process knowledge, and process improvement skills are highly preferred.
CATIA and AutoCAD experience is a plus.
Knowledge of design/drafting practices, design for manufacturability, GD&T, and proficiency in reading/understanding mechanical drawings.
Strong analytical skills coupled with a creative and open mind towards alternative methods.
Knowledge, Skills and Abilities:

Strong analytical and innovative skills.
Strong work ethic.
Ability to multitask.
Ability to work under minimal supervision.
Detail oriented.
Excellent problem solving skills.
Ability to read and interpret engineering drawing and/or specification requirements.
Excellent communication skills, both verbal and written.
Excellent presentation skills.
Strong working knowledge of Microsoft Office Suites (Word, Excel, PowerPoint, and Lotus Notes).
Knowledgeable of various manufacturing principles, engineering practices, mathematics, materials, and physical sciences to review detailed designs and drawings.

The Structures Company LLC is an AA/EOE.
 
Job Number: 496
Job Location: Greensboro, NC
Rate: $120-$140K **DOE**
Per Diem: No
Duration: DIRECT POSITION
Start Date: 4-5 Weeks
Input Date: 07/29/2021
Last Updated: 04/14/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Instrumentation Engineer

Description:
The primary responsibilities will include leading a small team to install and maintain aircraft instrumentation, the telemetry system, and a control room to support flight testing of aircraft.

Responsibilities:
• Lead a small team of engineers and technicians in supporting ground and flight test operations
• Own the installation, calibration, troubleshooting, and preflight inspections of the aircraft instrumentation and telemetry systems
• Own the development and configuration management of the control room IADS displays
• Develop processes and tools that support the collection and export of test data from a variety of sources including aircraft on-board logs, telemetry recordings, and simulator sessions
• Work with flight test and engineering teams to develop test plans, instrumentation requirements, and control room displays to support real-time test monitoring
• Support instrumentation checkout and calibration during aircraft integration, ground, and flight testing
• Contribute to test card development and review in collaboration with other engineering disciplines and flight test personnel
• Support the development of scripts and configuration management tools
• Support test readiness reviews, pre-flight checks, and pre/posttest briefings
• Provide mission control room support and make real-time decisions regarding safety, efficiency, and effectiveness
• Conduct and contribute to pre-flight and post-test data analyses to support anomaly identification and resolution

Required Knowledge, Skills, and Abilities:
• A Bachelor's degree in a science or engineering program
• 5+ years industry experience with leadership role experience
• Experience with the design, integration and/or troubleshooting of electrical or instrumentation systems
• A working knowledge of sensors and flight test instrumentation, analog and digital I/O, and data synchronization
• Ability to read and create wiring diagrams and troubleshoot wiring on test bench or on vehicle
• Experience working with scripting languages and working on a Linux command line
• Experience with aircraft telemetry systems
• The ability to travel to support the job duties
• Excellent communication skills

Preferred Knowledge, Skills, and Abilities:
• Experience interfacing with I/O hardware including analog, discrete, and serial data
• Experience with IADS flight test display software
• Experience with aircraft telemetry systems
• Experience with revision control systems
• Previous experience with new, experimental, or modified aircraft, launch vehicles or spacecraft
• Ability to work irregular hours and work days
• Experience integrating COTS components including navigation, air data, and communication equipment into airframes
• Experience with homebuilt aircraft and experimental aviation a plus

Degrees and Certifications:
• An undergraduate degree in a STEM field is required
• A master’s degree in Aerospace or Electrical Engineering is preferred
• Pilot's license and/or Aircraft Mechanic (A&P) license is a strong plus
 
Job Number: 45-017
Job Location: Denver, CO
Rate: DOE
Per Diem: Yes
Overtime: Possible
Duration: 1+ years
Start Date: ASAP
Input Date: 07/23/2021
Last Updated: 09/27/2021
Firm Name: PRECISION PERSONNEL INC
Attention: Cameron Town
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Integration Engineer

Description:
An Integration Engineer 2 role located in Kirkland, WA is currently available through Belcan. The Integration Engineer 2 will support development and test of aircraft electrical power generation, conversion, and distribution equipment, and qualification testing of development programs such as starter generators and electronic circuit breakers.

Integration Engineer 2 duties:

* Develop and perform circuit card level and unit level testing to ensure a successful product
delivery to customer's aircraft.
* Develop and document test equipment to support lab testing.
* Provide technical assistance to senior staff in support of current programs.
* Prepare and review custom test equipment drawings and designs, using electrical and
mechanical hardware and software, with guidance from other engineers, to enable test of
aircraft electrical power equipment.
* Analyze and solve a variety of technical problems through use of test data and specification
requirements. Organize and analyze data and document results. Review results to ensure their
accuracy and appropriateness.
* Prepare and present technical information of limited scope for internal engineers, program
personnel, and other internal customers.
* Acts as an individual contributor, building stable working relationships internally through tasks
and assignments.
* Guide internal technicians as required in performing system integration and development tests
and custom test equipment build.

EDUCATION AND EXPERIENCE REQUIRED:

* Electrical engineering background with a BSEE degree.
* 2 plus years of experience
* Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder), or
lawfully admitted into the U.S. as a refugee or granted asylum.

If you are interested in this Integration Engineer 2 role located in Kirkland, WA please apply via the 'apply now' link provided.

Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.


 
Job Number: 315149
Job Location: Kirkland, WA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/12/2021
Last Updated: 03/03/2022
Firm Name: BELCAN TECHSERVICES
Attention: ScottWatkins
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Lead Engineer / Manufacturing

Description:
Job Responsibilities
Building and leading a high performance, multi-disciplined Manufacturing Engineering organization. This includes managing talent selection, training, development, engagement, ongoing performance and succession planning.
Budgetary ownership for the site Manufacturing Engineering.
Accountable for delivering annual quality improvement targets for the site, enabling year on year conversion cost target realization.
Developing the Zero Defects Manufacturing (ZDM) mindset and culture into the site Manufacturing Engineering organization through implementation of standard ZDM tool suite and APQP process.
Developing close relationships with Program teams to deliver manufacturing engineering solutions in line with customer requirements and expectations.
Accountable for sustaining and improving Program & Product manufacturing engineering systems in line with business case expectations.
Exhibits commitment to quality performance in all aspects of every task or project performed.
Maintains a constant awareness towards safety in the workplace and notifies supervision immediately of hazardous conditions and practices.
Qualifications - External
Required Experience:
4-year degree in Engineering preferred or 7+ years of experience in aerospace manufacturing
7+ years of experience/technical expertise in Manufacturing Engineering, including experience with composite layup, bonding and assembly.
2+ years of experience in Manufacturing Engineering leadership preferred.
Experience of managing New Product / Process introduction (industrialization) & existing production process improvements required.
Working knowledge of LEAN processes and practices, including experience in leading multiple projects, required.
Must be able to perform work subject to ITAR/EAR regulations and/or program requirements.
Preferred Experience
Familiarity with AS9145 APQP process or equivalent preferred.
Working knowledge of quality system models such as ISO9000, AS9100, FAA CFR 145, FAA Part 21 preferred.
Able to lead RCCA, 8D, MRB or similar/equivalent management processes.
 
Job Number: 2110138595
Job Location: Orangeburg, SC
Rate: $33.00 - $53.00
Per Diem: Possible
Overtime: Possible
Duration: 6 Months
Start Date: ASAP
Input Date: 09/14/2021
Last Updated: 10/13/2021
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Kerry Moreland
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Lead Structural Analyst

Description:
A Lead Structural Analyst job with Belcan Engineering Group is currently available in Lexington KY, Cincinnati OH, or via remote support. This job is a full-time direct position. To be considered for this role, you will need Bachelor's Degree in Aerospace Engineering or equivalent, and 7 years of experience in airframe structural analysis. In this job your primary responsibility will be classical hand calculation and finite element analysis for aircraft and suborbital spacecraft. You will report to an Analysis Group Leader as a key member of an integrated product team.
Lead Airframe Structural Analyst job duties:
* Perform structural analysis using Finite Element Analysis (FEA) as well as classical aircraft hand stress analysis methods
* Generate and maintain ownership of air and space vehicle structural finite element models
* Perform plan, model, and results reviews, internally and with the customer
* Ensure that calculations and models are systematically checked and validated
* Perform analysis, evaluate results, and prepare formal reports of the findings
* Liaise with heat transfer, fluids, design engineering, drafting, and other teams as required
* Maintain strong communication with the internal project management and with the client
* Manage your own project work
* Oversee a small team of mid-level analysts to achieve project success
Minimum Qualifications:
* Bachelor's degree in Mechanical or Aerospace Engineering, or equivalent
* 7 years of airframe or aerospace vehicle structural analysis
* 2 years of experience using FEMAP with NASTRAN
* 2 years of airframe stress hand calculation
* 2 years analysis of composite aircraft structures
* Proficiency in understanding technical drawings
* Capability to assess the quality and impact of design changes in the context of a larger system
* Must have excellent verbal and written communication skills
* US Citizenship is required
Preferred Qualifications:
* Master's degree in Mechanical or Aerospace Engineering, or equivalent
* 10-14+ years of experience with airframe composites, FEMAP, NASTRAN, and hand calculations
* Experience using CATIA
* Experience with Fatigue, Durability And Damage Tolerance (DaDT) analysis
* Experience with MATLAB, PYTHON, MATCHCAD, NASGRO, and HYPERSIZER
* 10+ years in the aerospace industry
* Previous experience working for an aircraft or launch vehicle OEM


 
Job Number: 315951
Job Location: Lexington, KY
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 09/04/2021
Last Updated: 10/19/2021
Firm Name: BELCAN TECHSERVICES
Attention: AnthonyDonofrio
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Lead Structural Analyst

Description:
A Lead Structural Analyst job with Belcan Engineering Group is currently available in Lexington KY, Cincinnati OH, or via remote support. This job is a full-time direct position. To be considered for this role, you will need Bachelor's Degree in Aerospace Engineering or equivalent, and 7 years of experience in airframe structural analysis. In this job your primary responsibility will be classical hand calculation and finite element analysis for aircraft and suborbital spacecraft. You will report to an Analysis Group Leader as a key member of an integrated product team.
Lead Airframe Structural Analyst job duties:
* Perform structural analysis using Finite Element Analysis (FEA) as well as classical aircraft hand stress analysis methods
* Generate and maintain ownership of air and space vehicle structural finite element models
* Perform plan, model, and results reviews, internally and with the customer
* Ensure that calculations and models are systematically checked and validated
* Perform analysis, evaluate results, and prepare formal reports of the findings
* Liaise with heat transfer, fluids, design engineering, drafting, and other teams as required
* Maintain strong communication with the internal project management and with the client
* Manage your own project work
* Oversee a small team of mid-level analysts to achieve project success
Minimum Qualifications:
* Bachelor's degree in Mechanical or Aerospace Engineering, or equivalent
* 7 years of airframe or aerospace vehicle structural analysis
* 2 years of experience using FEMAP with NASTRAN
* 2 years of airframe stress hand calculation
* 2 years analysis of composite aircraft structures
* Proficiency in understanding technical drawings
* Capability to assess the quality and impact of design changes in the context of a larger system
* Must have excellent verbal and written communication skills
* US Citizenship is required
Preferred Qualifications:
* Master's degree in Mechanical or Aerospace Engineering, or equivalent
* 10-14+ years of experience with airframe composites, FEMAP, NASTRAN, and hand calculations
* Experience using CATIA
* Experience with Fatigue, Durability And Damage Tolerance (DaDT) analysis
* Experience with MATLAB, PYTHON, MATCHCAD, NASGRO, and HYPERSIZER
* 10+ years in the aerospace industry
* Previous experience working for an aircraft or launch vehicle OEM

 
Job Number: 315948
Job Location: Cincinnati, OH
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 09/04/2021
Last Updated: 10/19/2021
Firm Name: BELCAN TECHSERVICES
Attention: AnthonyDonofrio
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Liaison Engineer - TSII - Service Engineering (Weekend Day Shift)

Description:
Inconen is looking for a Liaison Engineer - TSII - Service Engineering (Weekend Day Shift) for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

The following unique skills are required:
1. Fundamental understanding of aircraft structures engineering principles and experience developing and applying minor and major repairs to aircraft structure.
2. The ability to use computer aided design tools such as Smart Team, CCD, CATIA V4 & V5, AutoCAD, or similar in the design and repair of aircraft structures.
3. Strong written and verbal communication and collaborative skills and the ability to effectively communicate the organization's position with external and internal customers.
4. Ability to effectively work with and support a multi-disciplined team of engineers, mechanics, technicians, managers, customers etc.
5. Flexibility to move quickly from one assignment to the next and the ability to handle multiple issues simultaneously.

The following unique skills are preferred:
1. Gulfstream engineering experience, e.g., GIV, G450, GV, G550, G650, G500, G600.
2. Experience with Maintenance and Structural Repair Manuals.
3. Experience designing aircraft structural repairs with basic static stress analysis in support of the disposition and or drawing.
4. Experience designing composite and metal bonded structural repairs.
5. Practical hands-on aircraft trouble shooting and problem-solving experience.

Education and Experience Requirements:
1. Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
2. 10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

Position Purpose:
1. Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

Principle Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues.
2. Is consulted extensively by associates and others as a recognized authority within the field.
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities.
4. Approach to problem solving balances technical product, cost and schedule.
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results.
6. Exercise’s latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative.

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
2. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 15235
Job Location: Savannah, GA
Rate: $68.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 08/31/2021
Last Updated: 09/16/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Liaison Engineer II (2nd Shift)

Description:
A Liaison Engineer II (2nd Shift) job in Louisville, CO is currently available through Belcan. In this role, you will be responsible for ensuring design requirements are met between production, planning, and supply chain, while maintaining schedule. Through a detailed understanding of the build processed, engineering change processes, design requirements and extensive collaboration with the internal team designing and managing installations, this team is a key stakeholder to ensure that the overall build achieves all objectives. To be considered for this role, you will have a Bachelor's Degree in Aerospace, Mechanical, Industrial or Manufacturing Engineering and typically 3+ years of relevant experience.

Liaison Engineer II (2nd Shift) Job duties:

* Assess, disposition, analyze, justify, determine cause and relay improvements for build discrepancies, errors and other nonconformances.
* Develop and utilize knowledge of various engineering change options, determine and execute the appropriate change option that creates the shortest path and meets engineering requirements for each unique problem.
* Provide guidance to technicians, engineers, and quality assurance engineers related to drawing and spacecraft requirements by overseeing installations, providing interpretation, and information briefs on key topics.
* Contribute to development and execution of standard repairs, analysis methods, and acceptable defects to streamline defects processing through MRB.
* Document, prioritize, communicate, and track required engineering changes fed back to the spacecraft design organization for resolution.


Qualifications:

* Experience in design and build of primary and secondary composite structures.
* Experience in design and build of metallic structures and fittings.
* Proficient or familiar with hand calculation methods for structural analysis.
* Proficiency preferred in NX CAD, but experience is another CAD package is acceptable.

Pay Range: Up to $46/hr DOE

If you are interested in this Liaison Engineer II (2nd Shift) position in Louisville, CO please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 315100
Job Location: Louisville, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/07/2021
Last Updated: 10/27/2021
Firm Name: BELCAN TECHSERVICES
Attention: FrancisOsolnick
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Engineer - Engineering Contractor 4

Description:
Inconen is looking for an MRB Engineer - Engineering Contractor 4 for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Experience Required:
-Minimum of Bachelor of Science degree in aerospace or mechanical engineering.
-Minimum of 10 years dedicated Structures MRB/Liaison Engineering experience at a recognized airframe manufacturer.
-Experience should be primarily with creation and justification of engineering dispositions for nonconformances of pressurized and non-pressurized, metallic and non-metallic aircraft structures.
-Experience should include all components of the aircraft (fuselage, wing, and empennage).
-Experience should be in a Production and/or schedule driven environment.
-Capability to rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule-driven environment.
-Experience with managing multiple engineering issues on different aircraft and prioritizing as required to meet production schedules.
-Strong written/verbal communication and interpersonal skills.
-Must be computer literate (such as, but not limited to, Word, Excel, PowerPoint, Catia V5, Smarteam, Solumina).

Job Summary:
-Design, analyze and disposition repairs for structural nonconformances in a timely manner to restore B/P design integrity.
-Adhere to company MRB and QA procedures.
-Interact with inspectors, shop technicians, other engineering disciplines, and management as required, providing support, prepare engineering dispositions, discussing RCCA, etc.
-Maintains a current and up-to-date knowledge of developments in aircraft structures in order to recommend innovations to improve the quality, economy, and effectiveness of company products.
-Weekend shift (4-10 hrs. days). Occasional overtime may be required.

Education Required:
-Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
-10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors.
-Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 16889
Job Location: Savannah, GA
Rate: $65.00 - $75.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 09/14/2021
Last Updated: 11/16/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Engineer - Engineering Contractor 4 (Weekend Day Shift)

Description:
Inconen is looking for an MRB Engineer - Engineering Contractor 4 for our client, a well-known Aerospace Company, in Savannah, GA.

Schedule: Weekend Day Shift

**Candidates must be a U.S. Citizen or Permanent Resident**

Experience Required:
-Minimum of Bachelor of Science degree in aerospace or mechanical engineering.
-Minimum of 10 years dedicated Structures MRB/Liaison Engineering experience at a recognized airframe manufacturer.
-Experience should be primarily with creation and justification of engineering dispositions for nonconformances of pressurized and non-pressurized, metallic and non-metallic aircraft structures.
-Experience should include all components of the aircraft (fuselage, wing, and empennage).
-Experience should be in a Production and/or schedule driven environment.
-Capability to rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule-driven environment.
-Experience with managing multiple engineering issues on different aircraft and prioritizing as required to meet production schedules.
-Strong written/verbal communication and interpersonal skills.
-Must be computer literate (such as, but not limited to, Word, Excel, PowerPoint, Catia V5, Smarteam, Solumina).

Job Summary:
-Design, analyze and disposition repairs for structural nonconformances in a timely manner to restore B/P design integrity.
-Adhere to company MRB and QA procedures.
-Interact with inspectors, shop technicians, other engineering disciplines, and management as required, providing support, prepare engineering dispositions, discussing RCCA, etc.
-Maintains a current and up-to-date knowledge of developments in aircraft structures in order to recommend innovations to improve the quality, economy, and effectiveness of company products.
-Weekend shift (4-10 hrs. days). Occasional overtime may be required.

Education Required:
-Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
-10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors.
-Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 16888
Job Location: Savannah, GA
Rate: $65.00 - $75.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 09/14/2021
Last Updated: 10/25/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MUOS Software Engineer

Description:
A MUOS Software Engineer job in Scottsdale, AZ is currently available through Belcan. In this role, you will participate in software application development (primarily Java) in a process-oriented organization. To be considered for this role, you will have a Bachelor's degree in software engineering or a related technical field is required, plus a minimum of 5 years of relevant experience; or Master's degree plus a minimum of 3 years of relevant experience. Agile experience preferred. Department of Defense secret security clearance is required at time of hire.

MUOS Software Engineer Job duties:

* Maintains hardware, software, and related components of project.
* Infrastructure improvements and maintenance in a process-oriented organization.
* Performs infrastructure requirements analysis, participates in research, designs, develops, and tests software and tools, to include development of new work products or enhancing existing applications, systems, or embedded products.
* Applies principles and techniques of computer science, engineering, and mathematical analysis to the development of complex architectures.
* Leverages scaled agile ceremonies, practices, and organization to plan, communicate, develop, and deliver Minimum Viable Product (MVP) solutions.
* Researches and analyzes data, such as customer design proposals, market trends, state of technology and industry, specifications, and manuals to determine feasibility of design or
* Commercial Software application configuration, integration into large DoD system
* Follows standard practices and procedures in analyzing situations or data from which answers can be readily obtained.
* Frequently works with organizations outside engineering or with external customers
* Builds stable working relationships
* Communicates objectively to discuss, defend, and reach consensus on design decisions.

Qualifications:

* Bachelor's degree in software engineering or a related technical field is required, plus a minimum of 5 years of relevant experience
* Software Java Development
* Ability to follow written instructions
* Proficient in Microsoft Office applications
* Proficient written and verbal communications skills
* Skilled in communicating issues, impacts, and corrective actions
* IT Infrastructure Development


If you are interested in this MUOS Software Engineer position in Scottsdale, AZ please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 315456
Job Location: Scottsdale, AZ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/18/2021
Last Updated: 10/08/2021
Firm Name: BELCAN TECHSERVICES
Attention: ScottWatkins
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MUOS Systems Engineer / Product Owner

Description:
A MUOS Systems Engineer / Product Owner job in Scottsdale, AZ is currently available through Belcan. In this role, you will participate in requirements analysis and management, functional analysis, performance analysis, system design, trade studies, systems integration and test (verification) in the development and evaluation of networks and information systems. To be considered for this role, you will have a Bachelor's degree in a STEM (Science, Technology, Engineering, Math) related field, plus a minimum of 10 years of relevant experience; or Master's degree plus a minimum of 8 years of relevant experience. Due to the nature of the work performed in this facility, US citizenship is required.

MUOS Systems Engineer / Product Owner Job duties:

* Participate in requirements analysis and management, functional analysis
* Performance analysis, system design, trade studies, systems integration and test (verification) in the development and evaluation of networks and information systems

Qualifications:

* Bachelor of Science in a STEM (Science, Technology, Engineering, Mathematics) related field, Agile experience preferred, plus a minimum of 10 years of relevant experience; or Master's degree plus a minimum of 8 years of relevant experience
* Substantial use, understanding and tailoring of systems engineering concepts, principles and theories
* Substantial proficiency with requirements management & system modeling tools
* Ability to recognize various architectural patterns, apply them appropriately, understand strengths/weaknesses within those architectures and develop architectural variations as necessary



If you are interested in this MUOS Systems Engineer / Product Owner position in Scottsdale, AZ please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 314762
Job Location: Scottsdale, AZ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/29/2021
Last Updated: 09/27/2021
Firm Name: BELCAN TECHSERVICES
Attention: FrancisOsolnick
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Machine Shop Manager

Description:
A Machine Shop Manager job in San Diego, CA is currently available through Belcan. In this role, you will be responsible for effectively leading, managing, directing, and developing the Composites Machining Operations Team to obtain optimum quality and productivity, while reaching strategic goals. You will also be responsible for implementing manufacturing plans and schedules to obtain optimum productivity which align with the organizations business objectives and strategic goals. To be considered for this role, you will have a Bachelor's degree in a related field and 5 or more years of relevant experience with management duties.

Machine Shop Manager Job duties:

* Oversees and monitors production priorities within the Machining Department to ensure the organizations objectives and operating requirements are met, including schedule, timelines, deliverables of products, customer satisfaction, quality, and cost containment.
* Provides general logistics support in and out of the Machine Shop including processing procurement requisitions for tooling and materials, Work Instruction closure and material relocation.
* Responsible for the direction, strategy, planning, and execution for all Machining Operations and directly responsible for executing to meet revenue and financial targets.
* Coordinates with other Manufacturing departments, Inspection, and Testing to assure that company objectives and program schedules are successful.
* Partners with engineering to maintain manufacturing routers for all machining operations.

Qualifications:

* Advanced knowledge and proficiency in MasterCam, MS Word, Excel, and Outlook applications required.
* Capable of Basic Math and has strong GD&T knowledge.
* Knowledge of G-Code and experience with FANUC and HAAS Controllers.
* Excellent interpersonal, written, oral communication, presentation, and facilitator skills with the ability to negotiate, influence and interact effectively with stakeholders at all levels of the organization exercising sensitivity to the audience.
* Possesses excellent leadership, team building and managerial skills with the ability to direct, energized, motivate, train, coach, assess, evaluate, and develop teams.

If you are interested in this Machine Shop Manager position in San Diego, CA please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 315706
Job Location: San Diego, CA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/31/2021
Last Updated: 10/18/2021
Firm Name: BELCAN TECHSERVICES
Attention: ScottWatkins
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Machinist III - 2nd Shift

Description:
A Machinist III - 2nd Shift job in Louisville, CO is currently available through Belcan. In this role, you will be responsible for completing fabrication of requested material to achieve defined specifications and provide responsive fabrication support. To be considered for this role, you will have a High School Diploma or GED and 5 or more years of relevant experience.

Machinist III - 2nd Shift Job duties:

* Complete the fabrication of requested material to achieve defined specifications and provide responsive fabrication support.
* Apply your knowledge of mechanics, shop mathematics, metal properties, layout, and machining procedures to set up and operate a variety of machine tools to produce precision parts and instruments.
* Fabricate and modify parts to make or repair machine tools or maintain our machines and equipment.
* Write programs for engineering drawings for machined part fabrication.


Qualifications:

* High school diploma or GED equivalent and typically 5 or more years of relevant experience.
* Advanced knowledge of machining techniques.
* Progressive experience with machining tools and equipment.

Pay Range: Up to $34/hr DOE

If you are interested in this Machinist III - 2nd Shift position in Louisville, CO please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 314873
Job Location: Louisville, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/31/2021
Last Updated: 10/26/2021
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Maintenance Mechanic

Description:
A Maintenance Mechanic position located in San Diego, CA is currently available through Belcan. In this role, you will perform and assist in installing, servicing and maintaining in operating condition all equipment as directed.

Responsibilities:
- Make routine, periodic or special instructions to determine the necessity of the repair and maintenance of plant machinery and equipment.
- Use of manufacturers' drawings and specifications, installation layouts and sketches to facilitate internal handling of less than major repairs.
- Materials generally lightweight to medium weight carried anywhere from 1 to 200 ft.
- Materials lifted floor level, waist level and overhead.
- Use of ladders, hoists, electrical carts and forklifts.
- Assists in the installation, servicing and maintenance of all plant equipment.
- Performs preventative maintenance on all plant machinery and equipment to make periodic inspections
- Maintain accurate paperwork and records.

Qualifications:
- High School education or the equivalent
- 3 - 5 years of related experience.
- Must have complete knowledge of industrial mechanics and have industrial electrical (pneumatic and hydraulic) experience.
- Must be able to read and interpret blueprints and wiring diagrams.
- Must know how to use and care for related test equipment.
- Must know how to operate maintenance shop equipment.
- Must be able to weld, cut, braze and solder, as well as, operate a forklift and overhead crane.
- Must possess basic skills in carpentry, plumbing and rigging.

If you are interested in this Maintenance Mechanic position located in San Diego, CA please apply via the 'apply now' link provided.

Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 313746
Job Location: San Diego, CA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 06/26/2021
Last Updated: 11/02/2021
Firm Name: BELCAN TECHSERVICES
Attention: DerrickHart
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Maintenance Technician Lead

Description:
Belcan has a job for a Maintenance Technician Lead located in Tucson, AZ. The Maintenance Technician Lead is responsible for the day-to-day troubleshooting and preventative/predictive maintenance. Acts as a senior material handling technician on all equipment that is installed at a specific site location. Provides assistance and mentors lower-level employees.

Key Responsibilities:

* Repair and maintenance of MHE including belt tracking, component adjustment/replacement, component lubrication, etc.
* Completes preventative maintenance routines, documentation, and procedures.
* Use electrical test equipment to troubleshoot electrical circuitry.
* Create and close work orders into asset management system with appropriate data to include labor hours, equipment maintenance, and parts used.
* Troubleshoot conveyance problems and understand resources needed to resolve them.
* Locate and track spare parts from inventory.
* Performs complex maintenance and equipment testing to ensure they meet specifications.
* Helps with training customers to operate equipment.
* Respond to service calls and correct equipment failures and faults.
* Identify problems as they occur and take appropriate steps to solve them.
* Develop and maintain positive working relationships across all levels of the organizations.

Qualifications:

* HS diploma or equivalent required. Associate degree or vocational technical training preferred. Specialized skill training/certification preferred.
* Demonstrates a senior-level knowledge of a technical or specialty area.
* Proven experience in area of responsibility and successful demonstration of position and key tasks as presented above.
* 10+ years of Electrical troubleshooting skills to include wiring, ac power, ac motors, electrical drawings/schematics, and control panels
* Mechanical experience with gearboxes, sprockets, chains, bearings, guide rollers, and other related equipment
* 5+ years of experience with a sorting machines.
* Servo drives, PLC, PC controllers, dc power supplies, optical devices (i.e., encoders, photoeyes, etc.
* Knowledge of automated equipment; preferably automated material handling systems. Some experience with Allen-Bradley RSLogix5000 PLC controls platforms
* Some experience with DeviceNet, PROFIBUS, Ethernet, or equivalent network communications is a plus
* MS Office products

If you are interested in this Maintenance Technician position in Tucson, AZ please apply via the 'apply now' link provided.

Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 315508
Job Location: Manteca, AZ
Rate: --
Per Diem: --
Overtime: --
Duration: JOB-CONTRACT_TYPE
Start Date: --
Input Date: 08/21/2021
Last Updated: 11/11/2021
Firm Name: BELCAN TECHSERVICES
Attention: Dee AnnVan Schaick
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing & Quality Engineer- Senior

Description:
A Quality Engineer job is currently available at Belcan in Lynn, MA. This is a full time, direct job with full benefits. Great matching candidates will have a strong shop floor and quality engineering background. You will be working within the Quality Engineering Department processing MRBs and non-conformances, onsite at our large aviation customer.

Quality Engineer job duties:
? Review issued 'Change in Design' (CID) documents to determine if the part is now conforming as a result of a CID Inventory
? Enter Data into the system in a manner that will allow the MRB (Material Review Board) to make an MRB disposition decision
? Provide tracking information for non-conforming parts.
? Track MRBs through the process with MRB chair, design and DCMA.

Qualifications:
? Three or more years of shop floor quality engineering experience, ideally within an aerospace production setting
? Ability to read blueprints and routers
? GD&T proficiency
? Knowledge in quality engineering, first article inspections/reviews and MRB
? Legal authorization to work in the US required

Desired skills:
? Mechanical Engineering Degree
? Manufacturing Engineering Technology Degree
? CNC programming skills
?
If you are interested in this Quality Engineering job in Lynn, MA please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.
?
Belcan is an equal opportunity employer. EOE/M/F/D/V
?
Build a challenging and rewarding career with an industry leader!
?
www.BELCAN.com

 
Job Number: 309749
Job Location: Lynn, MA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/27/2021
Last Updated: 11/23/2021
Firm Name: BELCAN TECHSERVICES
Attention: AnthonyDonofrio
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
A Manufacturing / Quality Engineer job is currently available at Belcan in Rutland, VT. This is a full time, direct job with full benefits. Great matching candidates will have a strong & successful Manufacturing & Quality Engineering work history. You will be working onsite at our large aerospace manufacturing customer.
 
Manufacturing / Quality Engineer job duties:
* Support hardware production
* Identify production issues and recommend solutions to maintain production workflow
* Identify and recommend production cost reduction methods
* Identify, track and recommend solutions to quality issues throughout the production process

Qualifications:
* At least five years of Manufacturing & Quality Engineering experience, within aerospace and in a manufacturing/shop floor
environment
* Ability to read blue prints and routers, GD&T knowledge
* Braze / Heat Treat experience
* String understanding of MRB (material review), FAIs (first article), and quality procedures (AS9100 & ISO)
* Legal authorization to work in the US required

Desired but not required skills:
* Mechanical or Manufacturing Engineering Degree
 
If you are interested in this Manufacturing / Quality Engineering job in Rutland, VT please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.
 
Belcan is an equal opportunity employer. EOE/M/F/D/V
 
Build a challenging and rewarding career with an industry leader!
 
www.BELCAN.com

 
Job Number: 311619
Job Location: Rutland, VT
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 04/23/2021
Last Updated: 09/28/2021
Firm Name: BELCAN TECHSERVICES
Attention: AnthonyDonofrio
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
• Performs “Manufacturing Engineer II” level assignments of intermediate to high complexity under the general direction of the Manufacturing Engineering Manager. He/she may also assist in product development and production of tooling, fixtures, and machinery. Coordinate with other departments, outside organizations and suppliers to assure that functional requirements are met on time, at the expected quality level and at the lowest cost.
• The Manufacturing Engineer II level employee also has the ability to review, develop and approve solutions for production problems relating to mechanical systems (fuel, bleed air, cabin pressure, Oxygen and ECS), manufacturing processes and/or tooling.
• The employee must be highly analytical, innovative and a critical thinker. This may include working from engineering design documents, specifications, prototypes and/or change orders to determine equipment, tooling, materials and methods of manufacture and installation to produce quality products within cost and specification guidelines.

Duties and Responsibilities:
• Analyze a variety of engineering data to help determine requirements to meet objectives
• Participate in project teams and may coordinate tasks/procedures with associates in other engineering functions
• Work on various product and process flow segments of developmental projects
• Conduct RCCA tests or experiments, record and evaluate data and report findings
• Responsible for process capability studies, test capability studies, & through-put rates
• Under the direction of assigned management; establish and implement processes, tooling, equipment and quality control methods to optimize the manufacturing operation
• Identify and develop specifications for purchase and installation of new capital-equipment
• Work with engineers and other personnel on continuous improvement projects as required
• Provide technical support and assistance with the development and improvement of methods, quality, product design, cost and technical issues
• Required to observe all safety rules and regulations, act safely and be responsible for the safety of others around the work area
• Promote and contribute to overall team environment
• Review and development of specifications and processes applicable to aircraft electrical systems
• Procedure documentation for assembly/fabrication/operation of new or existing components
• Evaluates/improve assembly and testing methods
• Adhere to production times, staffing requirements, and related costs on quality control and industry standards
• Assist in identifying and evaluating suppliers for new or critical processes & components
• Assist purchasing in resolving supplier technical questions, drawing and specification interpretation

Education, Work Experience, Certification and/or Licensure:
• B.S.M.E. or M.S.M.E. (Manufacturing, Engineering, Physics, Chemistry, Computer Science, etc.) in a technical field applicable to the job description
• Minimum 5 years aerospace industry experience in mechanical systems design evaluation, build and installation
• Strong knowledge of industry standards, processes and specifications related to aircraft mechanical systems and structure
• Must have a strong working knowledge of the following:
   o Evaluating and approving engineering design data (drawings, specifications, etc.)
   o Participating in design reviews and providing technical feedback
   o Design for manufacture-ability and design for assembly
   o Identifying the need for tooling and presenting technical requirements
   o Developing build plans based on installation drawings
   o Proposing design changes based on RCCA findings
   o Organizing and presenting technical information to all levels of management
• Strong communication skills
• Basic CATIA V5 experience is a plus
• Strong knowledge of design/drafting practices
• Evaluation of GD&T application on engineering drawings

Knowledge, Skills and Abilities:
• Proven ability to troubleshoot design and process issues, manufacturing errors, and time consumption/ learning curve issues to improve shop floor performance
• Teamcenter Manufacturing/ Process Planning creating MBOM’s and BOP’s are a plus
• The employee may be asked to participate in activities to enhance and support HACI production teamwork, and provide an environment for all team members to participate in continuous improvement
• The ability to read and interpret engineering drawings and/or specification requirements
• Excellent problem solving skills and the ability to work in a diverse environment
• Excellent communication and presentation skills, experience utilizing tools such as SAP, MS Office Suite (Word, Excel, PowerPoint and Project)
• Employee must have ability to work independently and multitask with a strong work ethic
• Time management and prioritization of assignments
• Willingness to work outside of assigned areas (structures, systems, interiors, etc.)
• Ability to work in a constant state of alertness and safe manner

Physical Requirements:
• Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
• Incumbents may be required to stand, sit, squat, walk, bend, climb ladders, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
• Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
• Read, hear, speak, and see with no restrictions, as required by job duties.
• Comprehend and adhere to management directions and/or safety instructions with no restrictions.
• Effectively communicate in Business English language.
• Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.
• Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties.
 
Job Number: 28-025
Job Location: Greensboro, NC
Rate: $40-$50/hr
Per Diem: Possible
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 08/23/2021
Last Updated: 09/27/2021
Firm Name: PRECISION PERSONNEL INC
Attention: Cameron Town
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer

Location: PAX River, MD

Job ID: #62105



Citizenship Requirement: US Citizen / No dual citizen

Min years of experience: Sikorsky Manufacturing Engineering and shop floor experience required.

Degree Requirements: BS in Engineering or Mechanical Engineering Technology



Proficient with CATIA V5, SAP, SOLUMINA and Right Hemisphere

The ability to communicate with offsite design, ME and Program management

Must be a self-starter and take on task when called upon.

Experience working in a Flight Operations environment

Able to work on their own, 7 days a week, self-starter, able to make decisions on the fly and own their own

Aviation Experience

Writing rework plans, MER, creating working instructions to support flight operations during testing phase. Must be knowledgeable in MS Office products.

Must be able to write weekly reports for duties completed to on-site LM management team.

The responsibilities of this position provide technical liaison support between all disciplines in order to expedite the flight release of a scheduled aircraft. This includes recommending corrective actions to engineering, operations and quality.

Perform producibility evaluation of Engineering changes, processing of engineering changes for planning of work instructions, bill of materials and tooling in support of flight test, Communicate with integrated flight test Engineering team (ITT), and the integrated product team (IPT), operations and the NAVAIR customers.

The engineer must be able to work the required hours to support a scheduled flight release.







____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 62105
Job Location: Pax River, MD
Per Diem: Possible
Start Date: ASAP
Input Date: 09/03/2021
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: David Surreira
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
A Manufacturing Engineer II job in Louisville, CO is currently available through Belcan. In this role, you will be responsible for consulting with program management, design engineers, quality, and production teams in order to develop the most efficient and cost-effective means of producing products at the highest level of quality possible. To be considered for this role, you will have a Bachelor's degree in a related discipline and typically 3 years of relevant experience.

Manufacturing Engineer II Job duties:

* Consult with program management, design engineers, quality, and production teams in order to develop the most efficient and cost-effective means of producing our products at the highest level of quality possible.
* Duties involve reviewing engineering designs for producibility and the development of tooling and fixtures, work instructions, production process and procedures.
* Research, design, develop, test, certify, deploy and improve cutting edge products and services.
* You will be involved in the application of manufacturing technologies and industry best practices during the design and development of new products and processes throughout the product lifecycle.

Qualifications:

* Experience with Computer Aided Engineering tools.
* Familiarity in applying and interpreting Geometric Dimensioning and Tolerancing (GD&T) per ASME Y14.5.
* Familiarity with work instruction/traveler development.
* Exposure to Product Lifecycle Management (PLM), Manufacturing Execution System (MES), and Manufacturing Resource Planning (MRP) systems.
* Background in the Aerospace and Defense Industry.

Pay Range: $37/hr to $46.25/hr DOE

If you are interested in this Manufacturing Engineer II position in Louisville, CO please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 314575
Job Location: Louisville, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/23/2021
Last Updated: 10/05/2021
Firm Name: BELCAN TECHSERVICES
Attention: FrancisOsolnick
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer - Electrical

Description:
General Summary:

Performs Manufacturing Engineer assignments of intermediate to high complexity under the general direction of the Manufacturing Engineering Manager/Assistant Manager. He/she may also assist in product development and production of tooling, fixtures, and machinery to coordinate with other departments, outside organizations, customers, and suppliers, to assure that functional requirements are met on time, at the expected quality level and at the lowest cost. The Manufacturing Engineer employee, also has the ability to develop solutions for production problems relating to electrical, harnesses and avionics, manufacturing processes, and/or tooling. The employee must be highly analytical, innovative and be a critical thinker. This may include working from engineering design documents, specifications, prototypes and/or change orders to determine equipment, tooling, materials and methods of manufacture and installation to produce quality products within cost and specification guidelines



Duties and Responsibilities:

Analyze a variety of engineering data to help determine requirements to meet objectives
Participate in project teams and may coordinate tasks/procedures with associates in other engineering functions
Work on various product and process flow segments of developmental projects
Conduct RCCA tests or experiments, record and evaluate data and report findings
Responsible for process capability studies, test capability studies, & through-put rates
Under the direction of assigned management; establish and implement processes, tooling, equipment and quality control methods to optimize the manufacturing operation
Identify, and develop specifications for purchase and installation of new capital-equipment
Work with engineers and other personnel on continuous improvement projects as required
Provide technical support and assistance with the development and improvement of methods, quality, product design, cost and technical issues
Required to observe all safety rules and regulations, act safely and be responsible for the safety of others around the work area
Promote and contribute to overall team environment
Review and development of specifications and processes applicable to aircraft electrical systems
Procedure documentation for assembly/fabrication/operation of new or existing components
Evaluates/improve assembly and testing methods
Adhere to production times, staffing requirements, and related costs on quality control and industry standards
Assist in identifying and evaluating suppliers for new or critical processes & components
Assist purchasing in resolving supplier technical questions, drawing and specification interpretation



Education, Work Experience, Certification and/or Licensure:

B.S.M.E. or M.S.M.E. (Manufacturing, Engineering, Physics, Chemistry, Computer Science, etc.) in a technical field applicable to the job description
Minimum 8 years aerospace industry experience in electrical & avionics design evaluation, build and installation
Strong Knowledge of industry standards, processes and specifications related to aircraft electrical systems
Must have a strong working knowledge of the following:
Evaluating harness designs
Harness routing considerations
Connector & pinning configurations
LRU placement, orientation and mounting scheme
Proposing design changes based on RCCA findings
Organizing and presenting technical information to all levels of management
Strong communication skills
Basic CATIA V5 experience is a plus
Strong knowledge of design/drafting practices
Design for manufacturability
Basic level GD&T proficiency in reading/understanding engineering drawings


Knowledge, Skills and Abilities:

Proven ability to trouble-shoot defects, manufacturing errors, and time consumption/ learning curve issues to improve shop floor performance
3D Drawing reviews and approvals for Engineering designs and specifications to ensure manufacturability of details, assemblies, and installations
Teamcenter Manufacturing/ Process Planning creating MBOM’s and BOP’s are a plus
The employee may be asked to participate in activities to enhance and support production teamwork, and provide an environment for all team members to participate in continuous improvement
The ability to read and interpret engineering drawings and/or specification requirements
Excellent problem solving skills and the ability to work in a diverse environment
Excellent communication and presentation skills, experience utilizing tools such as SAP, MS Office Suite (Word, Excel, PowerPoint and Project)
Employee must have ability to work independently and multitask with a strong work ethic
Time management and prioritization of assignments
Willingness to work outside of assigned areas (mechanical systems, structures, interiors, etc.)


The Structures Company LLC is an AA/EOE.
 
Job Number: 484
Job Location: Greensboro, NC
Rate: $50-$55/Hr. **DOE**
Per Diem: Yes
Duration: 1 Year+
Start Date: 4-6 Weeks
Input Date: 08/09/2021
Last Updated: 04/14/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Inconen is looking for a Manufacturing Engineer II for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
Previous aircraft testing and structures experience a plus.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 16648
Job Location: Savannah, GA
Rate: $52.50 - $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 07/29/2021
Last Updated: 11/01/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Inconen is looking for a Manufacturing Engineer II for our client, a well-known Aerospace Company, in Savannah, GA.

** Candidates must be a U.S. Citizen or Permanent Resident **

Unique Skills:
Previous Gulfstream planning and/or shop floor experience preferred. Advanced knowledge of SAP/Solumina or equivalent ERP/MES software.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.
 
Job Number: 15133
Job Location: Savannah, GA
Rate: $52.50 - $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 10/18/2021
Last Updated: 11/01/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Inconen is looking for a Manufacturing Engineer II for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
Previous SAP MRP experience preferred
Previous Solumina MES experience preferred
Previous work experience in fast paced manufacturing environment
Knowledge of Lean Manufacturing Principles

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 16767
Job Location: Savannah, GA
Rate: $52.50 - $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 08/25/2021
Last Updated: 12/06/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Inconen is looking for a Manufacturing Engineer II for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
Knowledge of CATIA, Solumina Planning, and SAP required.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 16696
Job Location: Savannah, GA
Rate: $52.50 - $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 08/10/2021
Last Updated: 11/08/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Inconen is looking for a Manufacturing Engineer II for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
Previous SAP MRP experience preferred
Previous Solumina MES experience preferred
Previous work experience in fast paced manufacturing environment
Knowledge of Lean Manufacturing Principles

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 16741
Job Location: Savannah, GA
Rate: $52.50 - $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 08/19/2021
Last Updated: 10/26/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Inconen is looking for a Manufacturing Engineer II for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
Previous Gulfstream experience is desirable.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 16675
Job Location: Savannah, GA
Rate: $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 08/04/2021
Last Updated: 09/21/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II - DIRECT POSITION

Description:
Performs “Manufacturing Engineer II” level assignments of intermediate to high complexity under the general direction of the Manufacturing Engineering Manager. He/she may also assist in product development and production of tooling, fixtures, and machinery. Coordinate with other departments, outside organizations and suppliers to assure that functional requirements are met on time, at the expected quality level and at the lowest cost. The Manufacturing Engineer II level employee also has the ability to review, develop and approve solutions for production problems relating to mechanical systems (flight control systems, doors, landing gear, hydraulics), manufacturing processes and/or tooling. The employee must be highly analytical, innovative and a critical thinker. This may include working from engineering design documents, specifications, prototypes and/or change orders to determine equipment, tooling, materials and methods of manufacture and installation to produce quality products within cost and specification guidelines.

Duties and Responsibilities:
1. Analyze a variety of engineering data to help determine requirements to meet objectives
2. Participate in project teams and may coordinate tasks/procedures with associates in other engineering functions
3. Work on various product and process flow segments of developmental projects
4. Conduct RCCA tests or experiments, record and evaluate data and report findings
5. Responsible for process capability studies, test capability studies, & through-put rates
6. Under the direction of assigned management; establish and implement processes, tooling, equipment and quality control methods to optimize the manufacturing operation
7. Identify and develop specifications for purchase and installation of new capital-equipment
8. Work with engineers and other personnel on continuous improvement projects as required
9. Provide technical support and assistance with the development and improvement of methods, quality, product design, cost and technical issues
10. Required to observe all safety rules and regulations, act safely and be responsible for the safety of others around the work area
11. Promote and contribute to overall team environment
12. Review and development of specifications and processes applicable to aircraft electrical systems
13. Procedure documentation for assembly/fabrication/operation of new or existing components
14. Evaluates/improve assembly and testing methods
15. Adhere to production times, staffing requirements, and related costs on quality control and industry standards
16. Assist in identifying and evaluating suppliers for new or critical processes & components
17. Assist purchasing in resolving supplier technical questions, drawing and specification interpretation

Education, Work Experience, Certification and/or Licensure:
1. B.S.M.E. or M.S.M.E. (Manufacturing, Engineering, Physics, Chemistry, Computer Science, etc.) in a technical field applicable to the job description
2. Minimum 5 years aerospace industry experience in mechanical systems design evaluation, build and installation
3. Strong knowledge of industry standards, processes and specifications related to aircraft mechanical systems and structure
4. Must have a strong working knowledge of the following:
• Evaluating and approving engineering design data (drawings, specifications, etc.)
• Participating in design reviews and providing technical feedback
• Design for manufacture-ability and design for assembly
• Identifying the need for tooling and presenting technical requirements
• Developing build plans based on installation drawings
• Proposing design changes based on RCCA findings
• Organizing and presenting technical information to all levels of management
5. Strong communication skills
6. Basic CATIA V5 experience is a plus
7. Strong knowledge of design/drafting practices
8. Evaluation of GD&T application on engineering drawings

Knowledge, Skills and Abilities:
1. Proven ability to troubleshoot design and process issues, manufacturing errors, and time consumption/ learning curve issues to improve shop floor performance
2. Teamcenter Manufacturing/ Process Planning creating MBOM’s and BOP’s are a plus
3. The employee may be asked to participate in activities to enhance and support HACI production teamwork, and provide an environment for all team members to participate in continuous improvement
4. The ability to read and interpret engineering drawings and/or specification requirements
5. Excellent problem solving skills and the ability to work in a diverse environment
6. Excellent communication and presentation skills, experience utilizing tools such as SAP, MS Office Suite (Word, Excel, PowerPoint and Project)
7. Employee must have ability to work independently and multitask with a strong work ethic
8. Time management and prioritization of assignments
9. Willingness to work outside of assigned areas (structures, systems, interiors, etc.)
10. Ability to work in a constant state of alertness and safe manner

Physical Requirements:
1. Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
2. Incumbents may be required to stand, sit, squat, walk, bend, climb ladders, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
3. Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
4. Read, hear, speak, and see with no restrictions, as required by job duties.
5. Comprehend and adhere to management directions and/or safety instructions with no restrictions.
6. Effectively communicate in Business English language.
7. Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.
8. Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties.



The Structures Company LLC is an AA/EOE.
 
Job Number: 513
Job Location: Greensboro, NC
Rate: $65-$88K **DOE**
Overtime: Possible
Duration: DIRECT POSITION
Start Date: ASAP
Input Date: 09/20/2021
Last Updated: 04/14/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer III

Description:
Inconen is looking for a Manufacturing Engineer III for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
1. Previous Gulfstream planning and shop floor experience. Advanced knowledge of SAP and Solumina required.

Education and Experience Requirements:
1. Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. 4 years manufacturing engineering, planning, or related technical experience.

Other Requirements:
1. Proven knowledge and understanding of Lean and/or Six Sigma principles and processes.
2. Knowledgeable of Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
4. Complete understanding and experience implementing Lean Manufacturing Concepts: 5S, JIT, SMED, KanBan, VSM, One Piece Flow, etc.
5. Working knowledge of Six-Sigma or other data-driven decision-making experience highly desirable.
6. Lean Six-Sigma Green Belt, equivalent certification, or proven experience in a Lean Six-Sigma environment highly desirable.

Position Purpose:
1. Work/Lead independently to prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions:
1. Perform technical studies of complex nature, conduct analysis of operations (existing or proposed).
2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
4. Investigate and assist in preparing justification for equipment and facility requests.
5. Perform productibility studies from engineering drawings.
6. Apply statistical methods to estimate future Manufacturing requirements.
7. Make necessary computer inputs and generate data or reports as needed.
8. Prioritize workloads based on schedules and needs; provide completion dates and work estimates based on available resources, past performance schedules, etc.
9. Keep current on state-of-the-art manufacturing developments.
10. Incorporate Lean Manufacturing Methodology into existing and future processes.
11. Develop business case and present to management for process improvement approval.
12. Assume the duties of the ME Group Head in his/her absence.
13. Assign and review work of subordinate personnel.
14. Supervise and train subordinates in work methods and procedures in the efficient and effective use of company resources to resolve work-related or quality problems.
15. Lead/coordinate the implementation of projects between multiple orgs.
16. Apply Lean and Six Sigma principles to manufacturing methods as a team member/leader.
17. Support all Safety, Sustainability and Ergonomic Initiatives.
18. Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
19. Author DRDI/DMT rework instructions to support effective corrective actions.
20. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
21. Generate make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving problems.

Additional Functions:
1. Ensure quality policies are being practiced; make recommendations to improve quality.
2. Perform other duties as assigned.
 
Job Number: 15139
Job Location: Savannah, GA
Rate: $62.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 06/16/2021
Last Updated: 10/06/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineers - Aerospace / Aviation / Aircraft - 3 Openings

Description:
Manufacturing Engineers - Aerospace / Aviation / Aircraft
MUST have either Landing Gears OR Arresting Gears experience.

Do you have a valid Passport? This is preferred to start in Europe for the first 21 days.

Responsibilities
Main point of Contact for technical issues in machining, sub-assembly and the assembly shop floor. Act proactively as a troubleshooter and resolve issues quickly.
Responsible for the preparation and managing of robust and capable (sub-)assembly process routings.
Accountable for product development, first article development, configuration changes, build process definition and implementation.
Investigate product deviations and handle them. Utilize root cause analysis, preventative and corrective action to reduce/eliminate non-conformances.
Implement Lean initiatives with regard to optimizing the general performance.
In consultation with technicians and operators, innovate, develop, improve and implement tooling and equipment for process optimization.
Advice and coach mechanics and technicians by providing on the job training and support.
Take Safety and Quality as a priority.

Qualifications
Technical Bachelor or Master, preferably in Aerospace or Mechanical Engineering
Work experience as an engineer in an machining & assembly environment
Experience of managing New Product / Process introduction (industrialization) & existing production process improvements
Fluent in English language, both written and spoken
Working knowledge of LEAN Six Sigma processes and practices
Green/Black belt certification is a plus
Good quality mind-set and strong documentation/reporting skills
Good communicative skills
Experience with ERP systems

The Structures Company is an AA/EOE
 
Rate: $60-67/hr DOE
Per Diem: Yes
Overtime: Possible
Duration: 6-12 months
Start Date: 2-4 weeks
Input Date: 08/25/2021
Last Updated: 09/22/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineers for Goleta or Oxnard, CA

Description:
Manufacturing Engineers
Goleta, CA OR Oxnard, CA
1 year contract
US Citizenship REQUIRED
Secret clearance NOT required
Drug Test
Background Check
Proof of US Citizenship WILL be required

Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling. Designs arrangement of machines within plant facilities to ensure most efficient and productive layout. Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance. Adapts machine or equipment design to factory and production conditions. May incorporate inspection and test requirements into the production plan. Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality. Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques. Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensures processes and procedures are in compliance with regulations.

Ensures processes and procedures are in compliance with regulations.

Please see managers comments:

• Since this is a Manufacturing Engineering position, they should have a minimum of a BS in Engineering (any engineering major is fine). This is not necessarily a requirement to perform the job as a Contract Engineer, but this would be a requirement if they are successful as a contract hire and we decide to convert them to be permanent. Based on how fast we are growing, I only want to hire people on contract that have a potential of becoming a permanent employee.

• They should have thorough mechanically / electrically oriented manufacturing engineering experience (ideally in the Aerospace industry). Some of the resumes indicate that they have ME experience, but it is in food or chemical. Also, some resumes show that they have manufacturing engineering experience as a planner, but not technical manufacturing engineering experience solving problems or responsible

• It is also important for them to have completed a significant manufacturing engineering project, ideally one where they led a team to accomplish the individual project tasks.
• They also need to have problem solving experience, even better to be green belt or black belt certified.

=====
If qualified, email a WORD version copy of your resume and then call Peggy at 774-210-4108 to discuss.
 
Job Number: PL Mfg Goleta
Job Location: Goleta or Oxnard, CA
Rate: $60/per hour
Per Diem: Possible
Overtime: Possible
Duration: 12+ months
Start Date: 2-3 weeks
Input Date: 05/21/2021
Last Updated: 01/26/2022
Firm Name: ADVANCED TECHNOLOGY
Attention: Peggy Sr. Recruiter
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Project Engineer

Description:
Manufacturing Engineer (Project Engineer)
Location: Mojave California (on-site)

Job Overview:
Belcan is looking for experienced, passionate, and accomplished manufacturing engineers to support a wide range of duties with the goal being to help establish and maintain a lean production environment. This includes, but is not limited to the equipment, tools, systems, and materials required to create an efficient, organized, and lean factory that fabricates propulsion systems. You will be responsible for supporting the manufacturing of various aerospace/structures subassemblies. As a Manufacturing Engineer, you will translate engineering intent, drawings, and configurations into consistent manufacturing processes which focus on quality, repeatability and speed. The role is multifunctional with a general knowledge needed for composite fabrication and assembly processes, lay-up, fastening, bonding, non-destructive testing, fixtures and assembly tooling, flow-mapping, process documentation, and various other aerospace manufacturing processes, and in general serve as a direct feedback loop between design, quality and production departments.
________________________________________

Job Responsibilities:
* Coordinate, oversee, and assist in performing modifications, fabrication, and assembly of various spacecraft mechanical systems and structures (metallic and composite) according to engineering plans and blueprints
* Evaluate and recommend real-time shop-floor process improvements to achieve reductions in delivery time, assembled cost, and defects
* Read, interpret, create, and operationalize Engineering Orders (E.O.s), blueprints, process specifications, and Manufacturing Work Instructions (MWI)
* Train shop floor technicians on your identified best practices in manufacturing and quality
* Identify and drive process improvements in work-holding, assembly tooling, product flow, process methods and inspection techniques

Qualifications:
* Bachelor of Science in Mechanical, Manufacturing, Aerospace (other relevant fields may apply) from an accredited university
* 5 years+ of manufacturing engineering experience working in a complex, high quality, fast paced, but highly manual production environment
* Experience with composite fabrication and assembly processes
* Experience working on shop floor with technicians/operators in a hands-on environment
* Working knowledge of Jigs/Fixtures/Production Tooling, Routings, Work Instructions, Visual Aids, Process Mapping, Mistake-Proofing
* Familiarity with the use and implementation of design for manufacturing/assembly, design to cost, effective product lifecycle management, and product configuration management and control
* Strong team player and ability to work independently with excellent organizational, communication, and problem-solving skills
* Ability to develop processes compliant to industry quality systems such as AS9100
* Must be a U.S. citizen or national or U.S. permanent resident

Desired Skills & Experience:
* Knowledge of or certifications in Kaizen and Lean Manufacturing philosophies and tools
* Knowledge of Geometric Dimensioning and Tolerancing philosophies
* A strong understanding of the importance of FOD control and tool control
* Experience with manufacturing-based ERP systems a plus

If you are looking for a challenging opportunity with a top performing aerospace company that will ignite your passion for building cool and innovative products, are exceptionally creative, are a great problem solver and can make things happen - apply today!


 
Job Number: 316042
Job Location: Mojave, CA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 09/09/2021
Last Updated: 09/16/2021
Firm Name: BELCAN TECHSERVICES
Attention: KevinGesner
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Master Production Schedule Analyst II

Description:
Inconen is looking for a Master Production Schedule Analyst II for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
1. Maintain the master schedule through coordination with operations, engineering, finance, sales and supply chain.
2. Ensure tasks in the master schedule are properly linked between key business units
3. Identify opportunities of improvement, that will optimize product flow, and enhance timeliness of schedule revisions.
4. Interface with department leads and managers to status, forecast, and build recovery plans to the master schedule.
5. Assist departments with milestone metrics, project plans, and recovery plans.
6. Coordinate with department leads and managers to resolve schedule conflicts.
7. Review department performance, and update planning rates to accurately reflect capabilities and capacity.
8. Lead or participate on special projects as required.
9. Update detailed weekly schedules based on sales targets, capacity, span, and head count.

Education and Experience Requirements:
1. Bachelor's Degree in Industrial Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Five (5) years of related experience with regard to Project Management Administration to include creating and maintaining schedules, stat using, forecasting, generating recovery plans, and analyzing flows.
3. APICS certificate (Association for supply chain and operations management) preferred.

Other Requirements:
1. Understanding of Resource Planning, Rough-Cut Capacity Planning, Detailed Capacity Planning, Crew Loading, Resource Leveling, and Cost Schedule Control Criteria.
2. Excellent understanding and proficient use of Microsoft Project, Excel, PowerPoint and Word for Windows.
3. Proficient use of other scheduling programs, spreadsheets, word processors, and databases.
4. General knowledge of aircraft processes and procedures relating to Engineering Design, Production and Budget.
5. Demonstrated analytical skills.
6. Demonstrated knowledge of an MRP system desired.
7. Strong written and verbal communication skills and strong interpersonal skills required.
8. Must be able to communicate with various levels of management.

Position Purpose:
1. Under minimal supervision, create and maintain a module of the Operations Master Schedule.
2. Integrate GIV, GV, Spares, Periodic Maintenance, Tool Conversions, ASCs, development and make recommendations concerning Flight Test Modifications, and other elements within the module.

Principle Duties and Responsibilities:
Essential Functions:
1. Monitor the manufacturing floor and interface with the appropriate departmental managers to status, forecast and build recovery plans to the module as required. Additionally, develop and dissemination of the any and recoveries schedules that are driven by engine and or wing supplier performance impacts.
2. Provide Variance Reporting for each line item in the module on a daily basis.
3. Analyze scheduling data for variability, cohesiveness, and adequacy.
4. Provide detailed information to the Mainframe Scheduling Database.
5. Maintain integrity of all related scheduling data of assigned module.
6. Participate in the redesign of the current scheduling processes to provide streamline schedule development through the elimination of non-value-added elements.
7. Identify crew loading and budgetary requirements to integrate Cost and Schedule for Performance Measurement.
8. Respond to requests from Purchasing, Planning, Engineering, and Operations as necessary.
9. Generates various what if scenarios and simulations to provide creative and alternative business solutions.
10. Maintains Integrated Critical Path Model.
11. Updates and maintains integrity of Critical Path Milestone documents.
12. Generates vendor DOD requirements for management of materials.
13. Provides labor resource planning.
14. Creates various types of analytical reporting.
15. Act as liaison between other plants and scheduling: Establish and maintain working rapport with off-site plant personnel, maintain integrity of scheduling parameters, resolve BOM disconnects, review and approve MCRs.
16. Develops and execute training programs for other scheduling personnel.
17. Provide Scheduling support in the integration of scheduling data to systems of the future.
18. Perform other duties as assigned.
 
Job Number: 16674
Job Location: Savannah, GA
Rate: $36.13 - $40.14/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 08/03/2021
Last Updated: 10/06/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Material Handlers

Description:
STS Technical Services is hiring Material Handlers in Milwaukee, Wisconsin.

Job Summary:

This role would ensure customers have their materials processed and shipped according to schedule through picking, packing and shipping materials while maintaining inventory levels.

Essential Duties and Responsibilities:
Pick, package and ship items in a manner to prevent damage in transit.
Report and communicate shipment statuses with management.
Perform safety inspections and internal audits of parts, systems, and processes.
Identify and locate parts within the warehouse and branch facility; keep track of parts movement.
Count inventory and ensure compliance with company standards.
Develop bills of lading and delivery forms.
Sort inbound and outbound material to proper fixture.
Prepare picking fixtures in support of picking process.
Maintain a clean, safe, and organized work area.
Basic Qualifications:
One (1) or more years of experience in shipping, receiving, or a related area.
Preferred Qualifications:
High School Diploma or its equivalent.
Knowledge and ability to use Materials Requirements Planning (MRP).
Experience working in a high-volume warehouse with automated systems.
Forklift Certification.
Why Should I Apply?
Work Schedule – Mon – Fri 7:00a – 3:30pm
Work in a clean and organized facility
Comprehensive medical, dental and vision benefits offered
Highly competitive wage for the area
About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.

#ZR
 
Job Number: 38229
Job Location: Milwaukee, WI
Input Date: 09/10/2021
Firm Name: STS AEROSTAFF SERVICES
Attention: Brooke Rankin
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Checker

Description:
A Mechanical Checker job in Indianapolis, IN is currently available at Belcan. This is a full time, direct job with full benefits.  Qualified candidates should have five years' experience using NX12 as a Checker. You will be working with a team of Engineers, Modelers, Drafters to help finalize the design, model, and draft, of tubes, brackets, tooling, fixtures, and engine components.   
 
Job duties:
· Ability to navigate NX to check models/drawings to Industry/customer standards
· ANSI/ASME Y14.5 GD&T standards and specifications
· Ability to learn the standards of the customer
· Communication skills both written and verbal
                
Qualifications:
· 5 years' experience as a Checker
· Aerospace background
· Following industry and customer guidelines, standards, and procedures
· Attention to detail
· Willingness to help guide and teach others
· Legal authorization to work in the US required
 
Recommended skills:
· Teamcenter
· NX12 experience
 
Job Number: 316027
Job Location: Indianapolis, IN
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 09/09/2021
Last Updated: 12/05/2022
Firm Name: BELCAN TECHSERVICES
Attention: TimRipperger
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Designer

Description:
A Mechanical Designer job in Walpole, MA is currently available through Belcan.  In this role, you will need to have experience with 2D and 3D modeling, drafting and designing using Creo. 
 
Job Responsibilities:
· Capable of 3D and 2D modeling, drafting, designing using CREO. 
· Capable and willing to work in a collaborative team environment
· Must be a strong communicator
· Will be in a dynamic environment, so must be able to switch from one task to other efficiently based on priority and direction
· Able and willing to learn new CAD tools as appropriate

Requirements:
· Five years of experience with designing/drafting in CREO
· Associate's or Bachelor's degree
· Previous Naval Marine or aerospace experience is a plus
· Legal authorization to work in the U.S. is required
· Support will be onsite at our customer's facility in Walpole
· Must be able to pass a drug and background check prior to employment
· Due to the nature of the work being performed, U.S. Citizen only

 
Job Number: 315937
Job Location: Walpole, MA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 09/03/2021
Last Updated: 10/18/2021
Firm Name: BELCAN TECHSERVICES
Attention: ColleenMinello
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Designer

Description:
Surfacing experience
Heavy solid modeling experience
Prefer Product Design but will accept Automotive or Aerospace experience
Pro/E - Creo Preferred but other CAD Software welcomed
 
Job Location: MI
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 09/08/2021
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
A Mechanical Engineer role located in Redmond, WA is currently available through Belcan. The Mechanical Engineer will lead all aspects of product development from concept and initial prototyping through commercialization by applying advanced engineering skills, cross-functional collaboration, and design control principles.

Mechanical Engineer job duties:

* Research, develop, design, and evaluate mechanical and electro-mechanical medical device
designs to satisfy clinical requirements.
* Engage directly with surgeon customers to assess product performance, gain insights and
implement refinements.
* Ability to understand customer unmet needs and translate into product requirements.
* Perform rapid prototyping and feasibility studies to refine and verify design and functionality.
* Design complex components and assemblies capable of achieving overall device performance
specifications, regulatory and manufacturing requirements.
* Develop analytical models and design of experiments to study, evaluate, or investigate designs.
* Assess, write, and submit intellectually property to support innovative product design
implementations.
* Provide technical and project direction to cross-functional team members.
* Support quality investigations into product lines, identify design issues, and implement design
improvements.
* Perform design verification and production transfer.

EDUCATION AND EXPERIENCE REQUIRED

* Advanced degree in a relevant engineering or technology field
* Advanced product design skills.
* Advanced skills in customer engagement, identifying customer needs and preferences.
* Knowledge of trends in surgical products, and latest ophthalmic and surgical market trends.
* Expert knowledge of mechanical and electromechanical design, manufacturing, processes, and
trends.
* Expert knowledge of cross-functional product development in medical device or related fields.
* Deep technical expertise in all aspects of technology and engineering related to
electromechanical devices.
* Deep understanding of current and upcoming technologies and trends in consumer electronics.
* Up-to-date understanding of general trends in technology, informatics, medicine, healthcare,
government, and environment.
* Advanced negotiations and influence skills.
* Working knowledge of healthcare regulatory requirements and best practice implementation.
* Advanced leadership skills or potential.

If you are interested in this Mechanical Engineer role located in Redmond, WA please apply via the 'apply now' link provided.

Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.




 
Job Number: 315228
Job Location: Redmond, WA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/12/2021
Last Updated: 09/15/2021
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Windchill Designer

Description:
A Windchill Designer job in Phoenix, AZ is currently available at Belcan. To be considered for this role, you will have an Associates degree in Computer Aided Design or related degree, and at least two years of experience working with Engineering Change Requests/Orders, parts & assemblies using Creo, with previous Aerospace experience strongly preferred. In this role, you will perform tasks including generation of ECR redlines, generation of Engineering Change Requests, redline incorporation, drafting, and routing of new Engineering documentation for formal Release.

Designer Job duties:
* Generation of redline markups from customer requests.
* Generation of Engineering Change Requests ( ECRs ), including interpretation of request and including any additional documentation for requested change.
* Maintains records, files, drawings, part lists, specifications, standards or other data essential to the accurate release of drawings as required.
* Create specifications and models for OEM customer off the shelf components for use in mechanical designs.
* Verifies own completed work checking mechanical layouts, making mathematical calculations as required using handbooks and catalogs in support of drafting calculations, materials used and quantities.

Qualifications:
* Requires Associates in Computer Aided Design, or similar degree with at least two years of experience.
* Must have demonstrated communication and interpersonal skills ensuring positive customer relations.
* Must have demonstrated ability on Creo platform to update and generate mechanical drawing documentation.
* Experience with Product Lifecycle Management system with experience in generation of Engineering Change Requests including generation of redline markups. Previous experience with Windchill PLM is desired.
* Knowledge of demonstrated abilities in Adobe Acrobat.
* Beneficial to have demonstrated abilities with Creo Schematics.
* Beneficial to have demonstrated abilities with Creo surfacing.
* Beneficial to have prior leadership experience.
* Beneficial to have knowledge of mechanical design concepts with Geometric Dimensioning and Tolerancing (GD&T).
*Legal authorization to work in the US is required, US Citizenship only

If you are interested in this Windchill Designer job in Phoenix, AZ, please apply via the 'apply now' link provided. Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

 
Job Number: 315662
Job Location: Phoenix, AZ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/25/2021
Last Updated: 02/03/2022
Firm Name: BELCAN TECHSERVICES
Attention: RobertRussell
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NC Engineer III

Description:
Inconen is looking for an NC Engineer III for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
1. Experience with CATIA, SmarTeam, Vericut software preferred. Experience with Mazak CNC equipment preferred.

Education and Experience Requirements:
1. Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Four (4) years machining, planning, tool design, or related manufacturing experience to include 2 years of experience as numerical control engineer.

Position Purpose:
1. Under minimal supervision, perform activities related to complex numerical control (NC) programming, including machining methods, tooling concepts, and programs for NC milling machines and lathes.

Principle Duties and Responsibilities:
Essential Functions:
1. Conduct a thorough analysis of engineering drawings, tool design drawings, and/or electronic models, to determine the optimal machining methods, selection of machine tool, and material cut size.
2. Interact with planners, tool designers, engineering, and customers as required, to finalize plan.
3. Develop cutter motion logic per operation sequence, selecting proper spindle speeds and feed rates.
4. Perform a thorough check on all aspects of the program and verify cutter paths through the utilization of Vericut.
5. Develop operator set-up sheets for numerical control machines.
6. Develop flat pattern mylars and templates as required.
7. Produce 2-D Catia tool drawings as required.
8. May act as Team Leader as required, assigning work tasks, maintaining work load schedules, and setting priorities to ensure timely completion of department goals and corporate objectives.

Additional Functions:
1. Assist in training and guiding lower-level engineers as needed.
2. Assist in formulating Numerical Control policies, procedures, and specifications as required.
3. Perform other duties as assigned.

Other Requirements:
1. Excellent verbal and written communication skills required.
2. Strong knowledge of various machining and drafting methods, technical writing, and computer use.
3. Ability to read and interpret complex blueprints and engineering drawings.
4. Must be highly proficient with Catia modeling, drafting, and Catia NC Mill function.
5. Must have demonstrated expertise and a proven track record in support of company policies and rules, and consistently meeting objectives.
 
Job Number: 16786
Job Location: Savannah, GA
Rate: $58.00 - $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 08/27/2021
Last Updated: 10/06/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NC Programmer - KS

Description:
Catia V5 NC Programmer
Location: Wichita, KS
Duration: 12 months, possible extension
Benefits: Overtime possible, medical, dental, 401K

Required:
• Catia V5 NC Programming
• Tool Design
• Vericut (please list latest version used on resume)
• Blue Print Reading Experience
• 5 years’ experience as an NC Programmer within the aerospace industry.
• Types of metals/materials must be listed on resume.
• Machining Background
Optional:
• MasterCAM
• Engineering Degree
• NC Programming Certifications
 
Job Number: 58720
Job Location: Wichita, KS
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 12 months
Start Date: ASAP
Input Date: 09/02/2021
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Erica Price
Address: 4010 WATSON PLAZA DR STE 138
City, State: LAKEWOOD, CA 90712
800 Phone: 866/277-3343
Fax Phone: 562/420-7688
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
PCB Designer / ECAD Librarian

Description:
A PCB Designer/ECAD Librarian job in McLeansville, NC is currently available through Belcan. In this role, you will be responsible for performing detailed design and documentation of mechanical components or subsystems. You will also manage your own design sub-tasks in support of the duties within the project assigned. To be considered for this role, you will have an Associate's degree in a related discipline, plus a minimum of 7 years of relevant experience. Due the nature of the work performed in this facility, US citizenship is required.

PCB Designer/ECAD Librarian Job duties:

* Contributes to design and documentation of semi-complex electrical components as active member of project team.
* Produces two-dimensional (2D) or three-dimensional (3D) CAD work product output for fabrication and assembly.
* Generates mechanical designs considering material requirements and functional characteristics.
* Generates and checks semi-complex to complex drawings.
* Performs tolerance analysis studies as required.

Qualifications:

* A minimum of seven years of experience in PCB design.
* A minimum of two years of experience in ECAD/PCB/EDA library development complainant to IPC 7351 a must.
* Experience using Mentor Graphics Expedition/xDM tool suite a must.
* Experience with a parts request system and library management practices.
* Experience with and understanding of the ECAD/PCB layout design processes.

If you are interested in this PCB Designer/ECAD Librarian position in McLeansville, NC please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 316120
Job Location: Mc Leansville, NC
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 09/10/2021
Last Updated: 09/15/2021
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
PWB/PWA Designer – Level 3 / Level 4

Description:
Inconen is looking for a PWB/PWA Designer – Level 3 / Level 4 for our client, a well-known Aerospace Company, in Canoga Park, CA.

**Candidates must be U.S. Citizens without Dual Citizenship**
**Must have Altium Designer experience and Windchill experience is preferred**

Duties:
-The primary duty is to generate PWB designs on AR-provided Altium PWB Design Tools for applications on various Space and Defense programs.
-This assignment will require an experienced individual that can work closely with electrical/electronic circuit designers and electro-mechanical designers in a team environment.

Skills:
-Extensive (10+ years) experience in the design, development and generation of PWB drawings.
-Experience in the use of S/W tools associated with PWB design is required and the ability to operate the -Altium Designer tool is mandatory.
-Experience in Windchill is also desirable.

Education:
-BSEE with 5 years of experience or 10+ years of direct industry experience in design and development of Printed Wiring Boards and Circuit Card Assemblies.
 
Job Number: 16878
Job Location: Canoga Park, CA
Rate: $65.00 - $75.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 Mos
Start Date: ASAP
Input Date: 10/25/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Paint Equipment Design Engineer

Description:
A Paint Equipment Design Engineer job in Fremont, CA is currently available through Belcan. In this role, you will be responsible for driving development and continuous improvement of equipment, paint process and standards with the Paint Shop. To be considered for this role, you will have a Bachelor's degree in Industrial, Mechanical, or Electrical Engineering plus a minimum of 3 years of experience in a technical engineering role.

Paint Equipment Design Engineer Job duties:

* Perform root cause analysis on equipment bad actors and major unplanned downtime. Develop and implement solutions using problem solving analysis such 8D and several other tools.

* Work in a team of engineers and technicians as an in-house integration team that scopes and executes projects from concept through to start-up and commissioning.
* Become subject matter expert on all equipment - mechanical, electrical, instrumentation and controls - and train other engineers and technicians in the paint shop.
* Takes initiative to create, implement and improve PM documents and schedules, under the direction of the maintenance management.
* Perform major equipment repairs and rebuilds, (some weekends and holidays required).

Qualifications:

* Knowledge on paint processes and robot programming (Durr equipment is a plus).
* Skilled with the use of a variety of hand and portable tools, as well as general machining and welding.
* Able to read and interpret mechanical drawings and electrical schematics.
* Willing to perform shift work (nights) and overtime as required.

If you are interested in this Paint Equipment Design Engineer position in Fremont, CA please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 308796
Job Location: Fremont, CA
Rate: --
Per Diem: --
Overtime: --
Duration: JOB-CONTRACT_TYPE
Start Date: --
Input Date: 01/27/2021
Last Updated: 02/02/2022
Firm Name: BELCAN TECHSERVICES
Attention: TaraHunt
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Powerplant Systems Engineer

Description:
Inconen is looking for a Powerplant Systems Engineer for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
-Powerplant systems engineering and part 25 certification experience including component qualification desirable.

Education and Experience Requirements:
-Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
-10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors.
-Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 16768
Job Location: Savannah, GA
Rate: $60.00 - $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 08/25/2021
Last Updated: 09/21/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Powerplant Systems Engineer

Description:
Inconen is looking for a Powerplant Systems Engineer for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
1. Ten (10) years’ experience with turbine engine nacelle integration and certification as well as component qualification desired.
2. Familiarity with RTCA DO-160 and ARP-4754A also desired.

Education and Experience Requirements:
1. Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Ten (10) years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

Position Purpose:
1. Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

Principle Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
2. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 16853
Job Location: Savannah, GA
Rate: $60.00 - $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 09/08/2021
Last Updated: 03/14/2022
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Instrumentation Engineer

Description:
In this role you can expect to lead a small team of engineers and technicians through a fast paced, cutting-edge flight test program. You will be responsible for designing, procuring, installing and troubleshooting the onboard data acquisition system on an exciting new aircraft project.

Ongoing engineering R&D work can be expected upon completion of the flight test project. Following the flight test program, you will work on the research and design of aerospace electrical and electromechanical systems, participate in environmental qualification testing, take part in flight test data acquisition and data reduction, write technical certification documents, and assist in manufacturing, installation, and product life cycle ongoing support.

This job will be primarily based at a test location in Washington State. Occasional travel to home office in Sandpoint, Idaho can be expected. Travel is required.

Job Description: Own the development, design, engineering and function of an onboard flight test data acquisition system. Position reports to Program Lead Engineer. Other expected duties include:

Define requirements for onboard data acquisition and telemetry system
Direct small team of engineers & techs to meet the needs of the program
Design and implement hardware and software solutions for ground and flight test
Work closely with vendors and partners
Install sensors, wiring, an any required electronic equipment in experimental test vehicle
Generate and review wiring diagrams, bill of materials, and installation drawings
Prepare data system for daily test execution
Calibrate, validate, document, and troubleshoot all installed sensors and equipment
Participate in ground, bench, and flight tests.
Data capture, storage, processing and analysis.
Draft proposals, cost estimates, plans, reports, and other documents as required
Review technical drawings and service documents to ensure compliance with engineering specifications and regulations
Qualifications:

10+ years instrumentation experience in experimental flight test
Experience leading an instrumentation effort is strongly preferred
Experience in Data Acquisition and software integration
Applicant must have experience using MS Excel, and MS Word
Applicant must demonstrate good technical writing skills
Must be able to communicate clearly and effectively within a multi-disciplinary team structure.
Fluency in written and spoken English is required
Education:

B.S. in Electrical Engineering or equivalent.

The Structures Company LLC is an AA/EOE.
 
Job Number: 498
Job Location: Arlington, WA
Rate: Up to $80/Hr., DOE
Per Diem: Possible
Duration: 6-12 Months, possibly longer
Start Date: ASAP
Input Date: 07/01/2021
Last Updated: 12/20/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Review Engineer 5 - 10 Openings

Description:
10 Liaison Engineer / MRB Engineer Openings Available
Good OT Available

Applies knowledge of design principles to assess and resolve product/process issues through the product lifecycle. Analyzes, conducts root cause analysis and develops dispositions for design non-conformances. Applies engineering principles to research technical, operational and quality issues that cannot be resolved by customer and designs interim and final engineering solutions. Identifies documents, analyzes reported problems and communicates deviations that could impact design intent and safety; recommends and manages resolution. Develops and implements product/process improvements. Supports Integrated Product Teams (IPT) and participates in design reviews. Represents the engineering community in the build through post production environment. Ensures supplier and build partner compliance with company standards. Develops customer correspondence for continued safe operation and maintenance of equipment. Participates in on-site disabled product repair teams and accident investigation or support team. Analyzes damage repair or structural modification to determine appropriate jacking and shoring, prevent collateral damage and assure a safe work environment. Designs interim structural repairs and conducts static strength analysis. Develops non-destructive test procedures, tools and standards. Conducts simple static strength analysis.

The ideal candidate will possess a general knowledge of manufacturing operations. Tasks are generally urgent with short flow time requirements.

Position Responsibilities
Duties will include (but are not limited to):
• Applies knowledge of design principles to assess and resolve product/process issues through the product lifecycle.
• Analyzes, conducts root cause analysis and develops dispositions for design non-conformances.
• Evaluation and analysis of airplane production discrepancies of all types, such as functional test, chemical & thermal processes, raw materials, parts, assemblies, and airplane installations, resolution of parts and/or design repairs/rework on components, assemblies incorrectly designed, incorrectly built, incorrectly installed or damaged.
• Product Review Engineers represent engineering on the Material Review Board (MRB), responding to questions and concerns from manufacturing and engineering organizations.
• Additional duties are to evaluate engineering /production data to determine corrective actions necessary for the elimination and prevention of chronic errors.
• The Product Review Engineer works across all functions to ensure corrective action is implemented. Designs responsibilities include review/approve design revisions to enable improvement in production processes, with coordination across all functions to ensure design engineering concurrence.
• Product Review Engineers are expected to demonstrate innovative approaches in process improvement activities and the ability to work with multiple disciplines within engineering, manufacturing and other organizations.
• When working with suppliers, Product Review Engineers review and audit MRB activities for domestic and foreign suppliers.

Basic Qualifications (Required Skills / Experience):
• Candidates must be willing to work on 1st, 2nd and 3rd shift along with weekends.
• This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “Us Person” includes US Citizen, lawful permanent resident, refugee, or asylee.
• ABET accredited engineering degree
• Engineering degree in the field of Mechanical, Civil, Electrical, and Aerospace/Aeronautical.
• Must be willing to work variable shifts, including weekends and overtime. Some positions may also be rotating shifts.
• Current or previous Materials Review Board (MRB)

Skill Set:

1. MRB
2. Structural repair
3. System troubleshooting
4. Catia and Enovia
 
Job Number: 45324-1
Job Location: North Charleston, SC
Rate: $90-105/hr
Per Diem: Yes
Overtime: Yes
Duration: 6-12 months+
Start Date: ASAP
Input Date: 09/15/2021
Last Updated: 01/26/2023
Firm Name: STRUCTURES COMPANY LLC
Attention: Garrett Smart
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Review Engineer 5

Description:
Product Review Engineer 5

Location: North Charleston, SC
Duration: 8-9 Months

Description:
Applies advanced knowledge of Client design and/or engineering principles. Assesses and resolves product/process issues through the product lifecycle. Leads research of technical, operational and quality issues that cannot be resolved by customer and designs interim and final engineering solutions. Directs cross-functional teams to analyze, conduct root cause analysis and develop dispositions for complex design non-conformances. Leads investigations into complex multidiscipline system related events. Uses innovative approaches and unique applications to address complex nonconforming conditions and to detect deviations Assesses complex system events reports to determine potential safety issues. Analyzes reported problems for potential safety issues. Develops and implements product/process improvements. Leads development of interim and final solutions. Provides design phase subject matter expertise by supporting Integrated Product Teams (IPT). Represents the engineering community in the build through post production environment. Oversees documentation of hardware problems. Identifies the need for technical training. Leads activities for on on-site disabled product repair teams and accident investigation or support team. Reviews and approves design and operational concepts for new designs. Designs complex jacking and shoring schemes. Leads the design of interim structural repairs and conducts static strength analysis. Develops and leads non-destructive test procedures, tools and standards.

Applies knowledge of Client design principles to assess and resolve product/process issues through the product lifecycle. Analyzes, conducts root cause analysis and develops dispositions for design non-conformances. Applies engineering principles to research technical, operational and quality issues that cannot be resolved by customer and designs interim and final engineering solutions. Identifies documents, analyzes reported problems and communicates deviations that could impact design intent and safety; recommends and manages resolution. Develops and implements product/process improvements. Supports Integrated Product Teams (IPT) and participates in design reviews. Represents the engineering community in the build through post production environment. Ensures supplier and build partner compliance with Client standards. Develops customer correspondence for continued safe operation and maintenance of equipment. Participates in on-site disabled product repair teams and accident investigation or support team. Analyzes damage repair or structural modification to determine appropriate jacking and shoring, prevent collateral damage and assure a safe work environment. Designs interim structural repairs and conducts static strength analysis. Develops non-destructive test procedures, tools and standards. Conducts simple static strength analysis.

The ideal candidate will possess a general knowledge of manufacturing operations.
Tasks are generally urgent with short flow time requirements.

Position Responsibilities
- Evaluation and analysis of airplane production discrepancies of all types, such as functional test, chemical & thermal processes, raw materials, parts, assemblies, and airplane installations, resolution of parts and/or design repairs/rework on components, assemblies incorrectly designed, incorrectly built, incorrectly installed or damaged.
- Product Review Engineers represent engineering on the Material Review Board (MRB), responding to questions and concerns from manufacturing and engineering organizations.
- Additional duties are to evaluate engineering /production data to determine corrective actions necessary for the elimination and prevention of chronic errors.
- The Product Review Engineer works across all functions to ensure corrective action is implemented. Designs responsibilities include review/approve design revisions to enable improvement in production processes, with coordination across all functions to ensure design engineering concurrence.
- Product Review Engineers are expected to demonstrate innovative approaches in process improvement activities and the ability to work with multiple disciplines within engineering, manufacturing and other organizations.
- When working with suppliers, Product Review Engineers review and audit MRB activities for domestic and foreign suppliers.
- Client MRB experience required
- Current or previous Client Commercial Engineering Materials Review Board (MRB) signature authority and must have taken UPR & CPR or SOAR.

Basic Qualifications (Required Skills / Experience):
- Candidates must be willing to work on 1st, 2nd and 3rd shift along with weekends and overtime.
- ABET accredited Engineering degree in the field of Mechanical, Civil, Electrical, and Aerospace/Aeronautical.
- Current or previous Client Commercial Engineering Materials Review Board (MRB) signature authority and must have taken UPR & CPR or SOAR

Education and Experience:
Degree and typical experience in engineering classification: Bachelor's and 7 or more years' experience, Master's degree with 5 or more years' experience or PhD degree with experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Additional Information
ENG Degree required

Education / Experience:
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 14 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+9 years' related work experience, Master+12 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

Additional Job Description:
- Client Commercial Airplanes (BCA) Material Review Board (MRB) credentials required
- Computer literate
- Must be able to read and write training material/job material

Skill Set:
- MRB
- Structural repair
- System troubleshooting
- Catia and Enovia
 
Job Number: 21-11454
Job Location: North Charleston, SC
Per Diem: split
Overtime: possible
Duration: 8-9 months
Start Date: 9/24/2021
Input Date: 09/08/2021
Last Updated: 09/10/2021
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 859 STEPHENSON HWY
City, State: TROY, MI 48083
Phone: 843/955-9221
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Review Engineer 5// Multiple locations

Description:
Product Review Engineer 5

Location: North Charleston, SC
Duration: 12 Months

Description:
At client, we are all innovators on a mission to connect, protect, explore and inspire. From the sea bed to outer space, you’ll learn and grow, contributing to work that shapes the world. Find your future with us.

Position Responsibilities
Duties will include (but are not limited to):
- Evaluation and analysis of airplane production discrepancies of all types, such as functional test, chemical & thermal processes, raw materials, parts, assemblies, and airplane installations, resolution of parts and/or design repairs/rework on components, assemblies incorrectly designed, incorrectly built, incorrectly installed or damaged.
- Product Review Engineers represent engineering on the Material Review Board (MRB), responding to questions and concerns from manufacturing and engineering organizations.
- Additional duties are to evaluate engineering /production data to determine corrective actions necessary for the elimination and prevention of chronic errors.
- The Product Review Engineer works across all functions to ensure corrective action is implemented. Designs responsibilities include review/approve design revisions to enable improvement in production processes, with coordination across all functions to ensure design engineering concurrence.
- Product Review Engineers are expected to demonstrate innovative approaches in process improvement activities and the ability to work with multiple disciplines within engineering, manufacturing and other organizations.
- When working with suppliers, Product Review Engineers review and audit MRB activities for domestic and foreign suppliers.

Basic Qualifications (Required Skills / Experience):
- ABET accredited engineering degree
- Engineering degree in the field of Mechanical, Civil, Electrical, and Aerospace/Aeronautical.
- Current or previous Materials Review Board (MRB)

Education and Experience:
Degree and typical experience in engineering classification: Bachelor's and 7 or more years' experience, Master's degree with 5 or more years' experience or PhD degree with experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Education / Experience:
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 14 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+9 years' related work experience, Master+12 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

Skill Code: 62E-Liaison Engineering

Additional Comments:
- Client Commercial Airplanes Material Review Board (MRB) credentials required- active or previous MRB is ok
- BDS authority considered; can transition to MRB more easily
- Computer literate
- Must be able to read and write training material/job material
- Successfully completing training OJT is a contingency

Skill Set:
MRB
Structural repair
System troubleshooting
Catia and Enovia
 
Job Location: North Charleston, SC
Rate: Open
Per Diem: Split
Overtime: Yes
Duration: 12 months
Start Date: ASAP
Input Date: 05/01/2023
Last Updated: 08/10/2023
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Production Supervisor

Description:
An Advisory need for a Production Supervisor job is currently available through Belcan in the domestic U.S. This job is a remote position that will travel and deploy to customers within manufacturing and supply chain environments. As critical project issues and needs for crisis intervention arise, this job will deploy to those customers. This job is a flexible, subcontract 1099 status. Great matching candidates will have strong manufacturing and supply chain leadership and supervisory skills capable of driving measurable solutions and outcomes for clients. In this job, you will be on site at customers and/or customer suppliers working to assess, mitigate, consult, identify, and administer outcomes.

Production Supervisor job duties:
* Deploy and travel to the customer(s) as needed.
* Act as an advisor and consult customer by working as a team member ensuring critical customer needs are met.
* Plans and assigns work, and recommends improvements in production methods, equipment, operating procedures, and working conditions.
* Provides leadership and utilizes independent judgment and action necessary to maintain normal on-going operations.
* Ensures employees perform work safely and that equipment is maintained and processes are carried out in compliance with health, safety and environment policies and procedures.
* Manages departmental performance metrics and provides regular KPI progress reports to Leadership. Supports data activities to deliver proper reports to internal and external customers.
* Ensures work meets quality standards. Addresses any non-conforming materials incidents; follows through on quality concern mitigation.
* Provides cross-functional communication with other department supervisors and managers to insure inventory control, production schedules, and on-time delivery.
* Communicate and interact with shop floor personnel, quality/process teams, customer management team, material teams, purchasing teams and other engineers involved in the process.

Qualifications:
* Proven Leader and Subject Matter Expert (SME) within manufacturing and supply chain production.
* Capable of operating onsite alone to professionally represent Belcan to support multiple parties' interests (Customer/Supplier).
* Operate with speed and precision.
* Ability to travel as needed and deploy rapidly in short notice to begin work due to assessment, supply chain disruptions, and project improvement initiatives.
* Background working with Automotive/Aerospace/Industrial OEMs, suppliers, and/or tooling and machine operations.
* Demonstrated capability to accurately assess deficiencies in manufacturing processes, and possesses the technical know-how to troubleshoot and solve complex manufacturability problems.
* Must have experience in both short and long-term improvement projects, with demonstrated capability to gain consensus and implement manufacturing process improvements.
* Proficient in their understanding and performance drivers of contracted KPIs
* Root cause analysis and lean methodologies to aid in both throughput, quality and capacity related issues.

Desired but not required skills:
* Mechanical aptitude and an understanding of design for manufacturing concepts.
* Hands on experience in the shop/manufacturing environment.
* Understanding of Mechanics of Materials and Structural Design.
* Knowledge of CAD Modeling (2D, 3D).
* Proficiency in MS Office products
* Experience with Cost reduction.

If you are interested in this Production Supervisor job that is remote and travels, please apply via the 'apply now' link provided.

Belcan is an equal opportunity employer. EOE/M/F/D/V

Build a challenging and rewarding career with an industry leader!

www.BELCAN.com


 
Job Number: 313998
Job Location: Detroit, MI
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/29/2021
Last Updated: 02/02/2023
Firm Name: BELCAN TECHSERVICES
Attention: AnthonyDonofrio
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Production Technicians

Description:
STS Technical Services is hiring Production Technicians in Menomonee Falls, Wisconsin.

Responsibilities:
Work on the assembly line doing a variety of tasks to support the assembly of engines and transmissions.
Provide support in our client’s machining operation to include loading and unloading of parts, quality inspection, and other tasks within a CNC environment.
Qualifications:
Must have High School Diploma, OR GED, OR one-year work experience -OR- a Manufacturing Skills Standard Certification (MSSC).
Must be able to perform in a high-speed manufacturing environment while standing for long periods.
About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.

#ZR
 
Job Number: 35555
Job Location: Menomonee Falls, WI
Input Date: 09/10/2021
Firm Name: STS AEROSTAFF SERVICES
Attention: Eleni Kalaitzi
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Program Planning Scheduling Analyst Sr.

Description:
Inconen is looking for a Program Planning Scheduling Analyst Sr. for our client, a well-known Aerospace Company, in Savannah, GA.

** Candidates must be a U.S. Citizen or Permanent Resident **

Unique Skills:
-Experience developing aircraft modification build schedules.
-Experience developing Integrated Master Schedules and critical path analysis

Education and Experience Requirements:
-Bachelor's Degree in Industrial Engineering, Business Administration, or related curriculum required or equivalent combination of education and experience to successfully perform the essential functions of the job.
-6 years formal scheduling experience with regard to planning, scheduling, and maintaining overall business analysis of managed programs.

Position Purpose:
-Under minimal supervision gathers, evaluates past and present information to develop schedules, program plans, financial and resource plans, and other duties needed to support assigned programs.
-Responsible for supporting the team with resource loaded plans and forecast analysis as required.

Principle Duties and Responsibilities:
Essential Functions:
1. Develop and maintain the schedule and/or financial operations of assigned programs that may include any or all of the following coordination with Programs, Engineering, Finance, Operations, Sales, and Product Support.
2. Develop and utilize efficient tools for collecting and maintaining business and financial analysis data. Analyze data to identify financial and non-financial impacts of managed programs.
3. Provide detail information to support planning and implementing development strategy analysis, including risk management and program impact analysis.
4. Interfaces with the Leads and Managers to status, forecast, and build recovery plans to the master schedule.
5. Conduct detail analysis with an emphasis on achieving cost and maximizing savings of the approved budget.
6. Identify opportunities of improvement in planning and scheduling, cost control, productivity, capacity planning and analysis.
7. Assist the suppliers in the development of performance metrics, capacity plans, employee training matrices, milestone plans and project plans.

Additional Functions:
1. Provide management with project status updates, feedback, and appropriate reporting.
2. Coordinate with the departmental leads and managers to flag disconnects between approved budget and schedule.
3. Perform other duties as assigned.

Other Requirements:
1. Requires advanced knowledge and experience with PC based software such as MS Excel, Project, Access, Word and PPT.
 
Job Number: 15165
Job Location: Savannah, GA
Rate: $36.13 - $40.14/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 06/15/2021
Last Updated: 10/03/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Coordinator

Description:
An Architectural Project Coordinator role located in Las Vegas, NV is currently available through Belcan. The Architectural Project Coordinator will be taught leadership skills and is a person who gets things done with minor supervision and direction by Senior Associates. A Project Coordinator-6 is a Professionally Degreed Graduate Architecture or Engineer, or an Associates Degreed professional with Seven (7) to Ten (10) years of professional experience

Architectural Project Coordinator Job Requirements:

* Assist in coordinating and leading the project team, with direction from the Project Manager, in developing construction contract documents for MID RANGE TO SMALL Building Projects. Engage with the PM and IPT to communicate task assignments, solicit status updates, and maintain program milestone achievement projections.
* Assist the Project Manager with project administration from schematic design phase through construction administration phase.
* A Project Coordinator-6 will be assigned specific responsibilities (as listed under the Project Coordinator-7) for specific projects. As a Project Coordinator-6 skill levels increase, project responsibilities will be increased proportionally, thus allowing Project Managers to effectively manage more projects.
* A Project Coordinator-6 may be called upon to assume full Project Coordinator-7 responsibilities. These assignments will be based on the individual Project Coordinator-6 skill level and the specific project's scope of work.
* Be aware of the project scope and of the Client's objectives, Satisfy Client's goals.
* Responsible for successful execution of the project and construction contract documents. The Project Coordinator is one of the Project Managers resources in organizing, coordinating, researching information, code analysis and troubleshooting the project.
* Receive incoming project information and distribute it to the project team and to outside consultants as directed by the Project Manager.
* Represents the firm in a professional manner and provides the quality control for the preparation of construction contract documents. Follows applicable guidelines for project standards as described in the CAD Manual and the Associates Policy & Procedure Manual.
* Assist with review of preliminary designs; reviews of schedules with labor projections. Provides guidance and training for other Project Coordinators and Technical Associates. Assists with maintaining specific project job files; attends project team meetings; anticipates and interprets problems and recommends solutions; reallocates work as necessary to meet scheduled deadlines; Assists in preparing memos and correspondence to Clients and coordinates correspondence with the Project Manager or Principal In-Charge.

EDUCATION AND EXPERIENCE REQUIRED:
* Professional Degree Graduate Architect/Engineer, or holds an Associate's Degree in Architecture/Engineering with a minimum of Seven (7) to Ten (10) years professional experience.
* Relevant work experience to include experience in all phases of architectural drafting, detailing scheduling, and coordination, plus a good knowledge of civil, structural, mechanical and electrical engineering, or any combination of education and experience that provides equivalent knowledge, skill and abilities.
* Strong computer aptitude to include thorough knowledge of computer-aided drafting and design systems.
* Ability to guide and supervise the work of others.
* Strong organizational skills.
* A thorough knowledge of ALL National Building codes.
* Strong understanding of building materials and construction methods and strong knowledge of procedures for production of construction documents.
* Ability to add, subtract, multiply and divide; perform calculation using fractions, decimals, and percentages; perform algebra, geometry and trigonometric calculations.
* Strong ability to make independent decisions within a general framework.
* Attend in-house seminars and continuing education outside of the office.
* Well-developed analytical and problem-solving skills.

If you are interested in this An Architectural Project Coordinator role located in Las Vegas, NV please apply via the 'apply now' link provided.

Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 312116
Job Location: Las Vegas, NV
Rate: --
Per Diem: --
Overtime: --
Duration: JOB-CONTRACT_TYPE
Start Date: --
Input Date: 05/03/2021
Last Updated: 12/07/2021
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer

Description:
A Project Engineer job in Windsor, CT is currently available at Belcan. This is a full-time direct position with benefits. To be considered, you will need a Bachelor's Degree in Aerospace, Electrical, Mechanical Engineering or similar discipline. In this role you will be responsible for providing technical leadership to a cross functional team in requirements change management, hazard/failure mode and effect analysis, system optimization and trade study analysis, component and system level specification compliance, verification test planning/execution, and certification report creation in a faced-paced, highly collaborative environment. This job is remote with travel required.
 
Project Engineer job duties include:
· Support the definition, decomposition and compliance traceability of requirements for components and subsystems within complex aerospace propulsion and life support systems. Effectively communicate requirements across all technical disciplines and levels of management
· Facilitate cross functional team collaboration in component development, system optimization, and development of certification test program plans
· Create test plans and procedures for component and system level verification and validation
· Monitor design, build, verification and validation efforts, drive team responses as required to keep plan execution to established metrics on track.
· Maintain requirements V&V compliance matrices, generate and present performance reports to client organization stakeholders
· Perform data analysis, root cause determination, and initiate corrective actions for deviation to performance, or schedule metrics on the project
· Generate and present overall project status reports to Belcan and Client organization stakeholders

Job Qualifications:
· BS or MS degree in Aerospace Engineering, Electrical Engineering, Mechanical Engineering, or a similar discipline with five to ten years experience in a highly regulated industry and familiarity with integrated product development, certification, and quality control standards (ISO/IEC; 9001,9100, RTCA; DO-160, DO-254, DO-178, MIL-STD; 461,464,704)
· Skilled with communication/collaboration, modeling and analysis, requirements management, and project management tools
· Self-motivated, adaptable, highly organized and possess excellent communication skills

Desired Skills:
· Multidiscipline team building, problem solving, and leadership skills are critical
· Experience with complex system design, integration, test, and deployment is highly desirable
· Knowledge of aerospace components, controls and systems is favorable
 
 
If you are interested in this Project Engineer job in Windsor, CT please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.
 
Belcan is an equal opportunity employer. EOE/M/F/D/V
 
Build a challenging and rewarding career with an industry leader!
 
http://belcan.com/

 
Job Number: 315444
Job Location: Windsor, CT
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/24/2021
Last Updated: 12/28/2021
Firm Name: BELCAN TECHSERVICES
Attention: KeturahCarhee
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer

Description:
A Project Engineer job in Phoenix, AZ is currently available at Belcan. This is a full-time direct position with benefits. To be considered, you will need a Bachelor's Degree in Aerospace, Electrical, Mechanical Engineering or similar discipline. In this role you will be responsible for providing technical leadership to a cross functional team in requirements change management, hazard/failure mode and effect analysis, system optimization and trade study analysis, component and system level specification compliance, verification test planning/execution, and certification report creation in a faced-paced, highly collaborative environment. This job is remote with travel required.
 
Project Engineer job duties include:
· Support the definition, decomposition and compliance traceability of requirements for components and subsystems within complex aerospace propulsion and life support systems. Effectively communicate requirements across all technical disciplines and levels of management
· Facilitate cross functional team collaboration in component development, system optimization, and development of certification test program plans
· Create test plans and procedures for component and system level verification and validation
· Monitor design, build, verification and validation efforts, drive team responses as required to keep plan execution to established metrics on track.
· Maintain requirements V&V compliance matrices, generate and present performance reports to client organization stakeholders
· Perform data analysis, root cause determination, and initiate corrective actions for deviation to performance, or schedule metrics on the project
· Generate and present overall project status reports to Belcan and Client organization stakeholders

Job Qualifications:
· BS or MS degree in Aerospace Engineering, Electrical Engineering, Mechanical Engineering, or a similar discipline with five to ten years experience in a highly regulated industry and familiarity with integrated product development, certification, and quality control standards (ISO/IEC; 9001,9100, RTCA; DO-160, DO-254, DO-178, MIL-STD; 461,464,704)
· Skilled with communication/collaboration, modeling and analysis, requirements management, and project management tools
· Self-motivated, adaptable, highly organized and possess excellent communication skills

Desired Skills:
· Multidiscipline team building, problem solving, and leadership skills are critical
· Experience with complex system design, integration, test, and deployment is highly desirable
· Knowledge of aerospace components, controls and systems is favorable
 
 
If you are interested in this Project Engineer job in Phoenix, AZ please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.
 
Belcan is an equal opportunity employer. EOE/M/F/D/V
 
Build a challenging and rewarding career with an industry leader!
 
http://belcan.com/

 
Job Number: 315603
Job Location: Phoenix, AZ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/24/2021
Last Updated: 12/20/2021
Firm Name: BELCAN TECHSERVICES
Attention: KevinGesner
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project and Component Engineer (Systems Components)

Description:
Inconen is looking for a Project and Component Engineer (Systems Components) for our client, a well-known Aerospace Company, in Canoga Park, CA.

** Candidates must be U.S. Citizens without Dual Citizenship **
** Active Secret Clearance or active within the last two years is required **
** This is NOT a Designer role. Please make sure that all candidates with a Designer background or Designer expectations are aware of this. This is a Project Engineer role **
** Candidates should have 3 years of related work experience **

Duties:
-Position is for a Component Product Engineer for the development, fabrication and test of rocket engine system interconnect hardware.

-25%: Development and fabrication support of rocket engine components using engineering and scientific principles.
-25%: Translates engineering and scientific concepts from preliminary ideas through product life cycle.
-20%: Interfaces with other members of project or program teams, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
-10%: Develops trade studies, design concepts, systems integration and component-level test plans.
-10%: Supplier integration with external vendors
-10%: Analyzes and verifies product design and performance for adequacy and reliability. Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.

Education:
-A Bachelor's degree in Mechanical or Aerospace Engineering.
 
Job Number: 15486
Job Location: Canoga Park, CA
Rate: $50.00 - $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 Mos
Start Date: ASAP
Input Date: 06/23/2021
Last Updated: 09/21/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project and Component Engineer - Level 2 / Level 3

Description:
Inconen is looking for a Project and Component Engineer - Level 2 / Level 3 for our client, a well-known Aerospace Company, in Canoga Park, CA.

**Candidates must be U.S. Citizens without Dual Citizenship**
**Our client mandates that all employees and contractors must be fully vaccinated for COVID-19**
**Secret Clearance desired but not required**

Duties:
-Position is for a development engineer in support of development of rocket engine combustion devices hardware in missile defense systems.
-Knowledge of pressure-fed hypergolic propellant systems is desirable.
-Responsibilities include design support, trade studies, hardware development, specification preparation and release, fabrication support, test planning, vendor/supplier integration and coordination.
-Supports combustion devices hardware through the entire product life cycle.
-Analyzes and verifies product design and performance for adequacy and reliability.
-Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.
-Interfaces with other members of project or program teams, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.

Skills:
-General engineering/science background; Understanding and use of analytical, design or process procedures pertinent to the particular field of engineering.
-Ability to read and interpret blueprints, technical drawings and specifications;
-Ability to communicate clearly and concisely;
-May require the use of engineering test equipment, CAD, and/or various computer systems.
-Ability to operate effectively in a team environment.

Education:
-Bachelors degree in Engineering and two years directly related experience as an associate engineer or equivalent combination of education and experience.
 
Job Number: 16762
Job Location: Canoga Park, CA
Rate: $40.00 - $60.00/HR (DOE)
Per Diem: Split Possible
Overtime: Possible
Duration: 8 Mos
Start Date: ASAP
Input Date: 10/26/2021
Last Updated: 11/09/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Propulsion Engineers Needed - 40 Openings

Description:
Aviation / Aerospace / Aircraft Experience is a MUST.

• What are the Top 3-5 Technical/Software Skills needed to perform this role/job?:
o Air Vehicle propulsion
o Analytical skills
o Analyze and interpret engineer data
o Design concepts and techniques
o Propulsion system tech Dev
o Propulsion System Test and Certification

Leads definition of requirements for propulsion systems, auxiliary power systems and vehicle fuel and tank systems. Leads definition, coordination and control of the functional and physical interfaces between the propulsion system and the vehicle. Leads development of specifications and architectural and configuration concepts for associated vehicle systems to meet customer and regulatory requirements. Leads configuration and design of propulsion sub-systems and components to meet all vehicle design and performance criteria. Leads the use of various testing, analysis, modeling and simulation tools to estimate or calculate system performance. Leads the definition and performance of certification tests for propulsion sub-systems and components. Leads support of fielded systems by developing responses to customer queries and providing technical recommendations. Leads development of concepts for future propulsion systems to meet anticipated requirements. Works under minimal direction.

Remote, onsite or a combination of both? Combination of both 1-2 days per week

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

The Structures Company LLC is an AA/EOE.
 
Job Number: 516
Job Location: Everett, WA
Rate: $60-$68/Hr. **DOE**
Per Diem: Yes
Overtime: Possible
Duration: 12 Months
Start Date: ASAP
Input Date: 11/22/2021
Last Updated: 12/20/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Assurance Engineer

Description:
Your Mission

Interface with manufacturing, engineering, and suppliers to ensure that requirements are met and correctly documented.
Ensure compliance with company policies, practices, procedures and work rules to support and maintain an AS9100-compliant Quality Management.
Participate in process improvement planning in a Team based environment. Develop and maintain required process metrics.
Perform process quality audits and internal audits of the QMS.
Coordinate with customers on product quality issues, escapes and development of corrective actions. Analyze non-conformance trends to evaluate effectiveness of corrective actions.
Successfully handle the quality audit process, including planning, preparing, executing, reporting results, and follow-up.
Comply with safety regulations and promote safe working environment.

What you bring

ASQ certification preferred.
Degree qualified (or equivalent experience) in Manufacturing, Aerospace or Mechanical Engineering. Proven hands-on experience in an airframe fabrication, assembly and integration environment.
In depth understanding of the testing, inspection, quality issues and certification of aircraft, including all systems and particularly those associated with composite aero structures.
Knowledge of ISO 9001:2000, AS9100, FAA regulations and industry standards. Advanced problem solving, including analyzing, investigating and following up.
Proven experience in quantitative data analysis, measurement systems, reporting methodologies and MRB processes.
Knowledge of business systems including ERP, Microsoft Office and CATIA V5.
Being innovative in tactical matters, breaking down barriers, proposing alternate solutions for process improvement.

Attention to detail and follow through.
ITAR Requirements
To conform to U.S. Government space technology export regulations, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by ITAR (22 CFR §120.15) or eligible to obtain the required authorizations from the U.S. Department of State.



The Structures Company LLC is an AA/EOE.
 
Job Number: 508
Job Location: Mojave, CA
Rate: ***DOE***
Per Diem: Yes
Overtime: Possible
Duration: 8+ Months - Possibly Longer
Start Date: ASAP
Input Date: 10/07/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Assurance Engineering Specialist

Description:
Inconen is looking for a Quality Assurance Engineering Specialist for our client, a well-known Aerospace Company, in Savannah, GA.

** Candidates must be a U.S. Citizen or Permanent Resident **

Candidate shall:
1. Demonstrate a working knowledge of Industry Standards developed to mitigate Counterfeit Parts and their proper application both internally, and across the supply chain
2. Demonstrate knowledge of Defense Acquisition Regulations Systems (DFARS)
3. Be able to understand/interpret customer requirements in contractual terms and conditions and incorporate appropriate roll down requirements for sub-level work and procurement
4. Lead avoidance efforts to include implementation of inspection techniques for part types and when / how to apply them
5. Demonstrate familiarity with external sources of information and notification tools (GIDEP, FAA Order 8120.16A-Suspected Unapproved Parts Notification, OASIS, ERAI, etc.)
6. Demonstrated experience with electrical/electronic components

Education and Experience Requirements:
1. Bachelor's Degree in Engineering, aviation sciences, quality systems or related field required or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Six (6) years quality assurance/control, manufacturing operations and/or military operations experience is required. Aerospace industry experience preferred.

Other Requirements:
1. Maintain an up-to-date knowledge in the areas of Quality Assurance, Regulatory Compliance, Design Controls, Risk Management, and Statistical Techniques.
2. Demonstrated experience and knowledge of FAA regulations, CATIA and Solumina preferred.
3. Knowledgeable of the Geometric Dimensioning & Tolerance (GD&T) standard ASME Y14.5.
4. Thorough knowledge of quality policies, procedures and all related technical data required.
5. Lean/Six Sigma certification as a green belt preferred.
6. Proficient computer skills.

Position Purpose:
1. Performs Quality Assurance Engineering assignments that require independent evaluation, selection, and application of standard Quality Engineering techniques, procedures, and criteria.
2. Is required to use judgment and ingenuity in making adaptations and modifications to any standard process.
3. Is a mentor and trainer for all other Quality Assurance Engineers.
4. Considered a subject matter expert in subjects of the QAE body of knowledge.
5. Undertakes those projects that are considered complex that require independent execution within a defined set of skills or knowledge area without help or coaching from others.

Principle Duties and Responsibilities:
Essential Functions:
1. Actively identifies and completes process improvement projects related to achieving improved quality or efficiency within their area of responsibility.
2. Works with management on Strategic planning for the Quality Assurance Engineering organization.
3. Interprets and executes company policies and procedures; develops new procedures as required.
4. Familiar with leadership principles and techniques when developing and organizing teams.
5. Maintains KPIs for the QAE processes to demonstrate process effectiveness and improved efficiency.
6. Promotes, encourages and leads employees towards a continuous improvement culture.
7. Review’s customer contracts on medium, moderately complex projects and responsible for requirements analysis, identification and definition.
8. Serves as QA customer interface for various oversight activities.
9. Proficient in the use and interpretation of GD&T, ASME Y14.5
10. Performs quality planning activities including Quality Plans, QADs and Inspection Plans as required. by the assigned project(s).
11. Performs design document reviews as appropriate for the assigned project(s).
12. Participates in process improvement activities through monitoring, root cause investigations, auditing, failure analysis etc.
13. Participates in CDRL development, review and delivery to the customer as required. by the assigned project(s).
14. Utilizes industry and GAC Quality Management System concepts, policies and procedures.
15. Assists in gauging and calibration activities as necessary.
16. Participates in MRB disposition activities.
17. Proficient in the application of SPC techniques and tools such as Minitab software.
18. Communicates well, both written and verbal, with all the interfacing functions.
19. Maintains good interpersonal skills and demonstrates leadership skills necessary for the position.

Additional Functions: 1. Prepares team to meet future requirements through training and employee development activities. Perform other duties as assigned.
 
Job Number: 16756
Job Location: Savannah, GA
Rate: $45.32 - $50.35/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 08/23/2021
Last Updated: 11/03/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Assurance Engineering Specialist

Description:
Candidate shall:
• Demonstrate a working knowledge of Industry Standards developed to mitigate Counterfeit Parts and their proper application both internally, and across the supply chain.
• Demonstrate knowledge of Defense Acquisition Regulations Systems (DFARS)
• Be able to understand/interpret customer requirements in contractual terms and conditions and incorporate appropriate roll down requirements for sub-level work and procurement
• Lead avoidance efforts to include implementation of inspection techniques for part types and when / how to apply them
• Demonstrate familiarity with external sources of information and notification tools (GIDEP, FAA Order 8120.16A-Suspected Unapproved Parts Notification, OASIS, ERAI, etc.)
• Demonstrated experience with electrical/electronic components

Education and Experience Requirements:
Bachelor's Degree in Engineering, aviation sciences, quality systems or related field required or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Six (6) years quality assurance/control, manufacturing operations and/or military operations experience is required. Aerospace industry experience preferred.

Position Purpose:
Performs Quality Assurance Engineering assignments that require independent evaluation, selection, and application of standard Quality Engineering techniques, procedures, and criteria. Is required. to use judgment and ingenuity in making adaptations and modifications to any standard process. Is a mentor and trainer for all other Quality Assurance Engineers. Considered a subject matter expert in subjects of the QAE body of knowledge. Undertakes those projects that are considered complex that require independent execution within a defined set of skills or knowledge area without help or coaching from others.

Principle Duties and Responsibilities:
• Actively identifies and completes process improvement projects related to achieving improved quality or efficiency within their area of responsibility.
• Works with management on Strategic planning for the Quality Assurance Engineering organization.
• Interprets and executes company policies and procedures; develops new procedures as required.
• Familiar with leadership principles and techniques when developing and organizing teams.
• Maintains KPIs for the QAE processes to demonstrate process effectiveness and improved efficiency.
• Promotes, encourages and leads employees towards a continuous improvement culture.
• Reviews customer contracts on medium, moderately complex projects and responsible for requirements analysis, identification and definition.
• Serves as QA customer interface for various oversight activities.
• Proficient in the use and interpretation of GD&T, ASME Y14.5
• Performs quality planning activities including Quality Plans, QADs and Inspection Plans as required. by the assigned project(s).
• Performs design document reviews as appropriate for the assigned project(s).
• Participates in process improvement activities through monitoring, root cause investigations, auditing, failure analysis etc.
• Participates in CDRL development, review and delivery to the customer as required. by the assigned project(s).
• Utilizes industry and GAC Quality Management System concepts, policies and procedures. 15. Assists in gauging and calibration activities as necessary.
• Participates in MRB disposition activities.
• Proficient in the application of SPC techniques and tools such as MiniTab software.
• Communicates well, both written and verbal, with all the interfacing functions.
• Maintains good interpersonal skills and demonstrates leadership skills necessary for the position.
• Prepares team to meet future requirements through training and employee development activities.

Other Requirements:
• Maintain an up to date knowledge in the areas of Quality Assurance, Regulatory Compliance, Design Controls, Risk Management, and Statistical Techniques.
• Demonstrated experience and knowledge of FAA regulations, CATIA and Solumina preferred.
• Knowledgeable of the Geometric Dimensioning & Tolerance (GD&T) standard ASME Y14.5.
• Thorough knowledge of quality policies, procedures and all related technical data required.
• Lean/Six Sigma certification as a green belt preferred.
• Proficient computer skills.
 
Job Number: 24-593
Job Location: Savannah, GA
Rate: $45-$50/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ Year
Start Date: ASAP
Input Date: 08/23/2021
Last Updated: 09/27/2021
Firm Name: PRECISION PERSONNEL INC
Attention: Cameron
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Control Inspector III - 3rd Shift

Description:
A Quality Control Inspector III - 3rd Shift job in Louisville, CO is currently available through Belcan. In this role, you will be responsible for visually inspecting materials, parts, and products at different stages of production, as well as recording observations and making recommendations for improving processes. To be considered for this role, you will have a High School Diploma or GED and typically 3+ years of relevant experience.

Quality Control Inspector III - 3rd Shift Job duties:

* Perform precision laser alignment & laser tracking model functions and reporting.
* Perform FARO arm inspections and reporting.
* Perform accurate mechanical, physical and visual inspection of raw materials, components, and sub-assemblies per Inspection Plans, drawings and other specification requirements.
* Read and interpret specifications and part prints.
* Ensure calibration and maintenance of inspection equipment is up to date prior to conducting inspection operations.

Qualifications:

* High School Diploma or equivalent.
* 2-5 years' experience in a Manufacturing Quality Control environment.
* Familiar with various metrology equipment and lab setup techniques. (FARO Vantage CMM, Creaform C-Track/Metrascan 750, and FARO Quantum Arm).
* Previous mechanical inspection background with ability to use basic hand measurement tools (calipers, micrometers, thread gauges etc.).
* Proficient in GD&T.

Pay Range: Up to $29.50/hr DOE

If you are interested in this Quality Control Inspector III - 3rd Shift position in Louisville, CO please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 315766
Job Location: Louisville, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 09/03/2021
Last Updated: 09/20/2021
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Control Inspector IV - 4th Shift

Description:
A Quality Control Inspector IV - 4th Shift job in Louisville, CO is currently available through Belcan. In this role, you will be responsible for using your skills and expertise to ensure that our incoming parts, in-process production, and shipped product fulfill all quality requirements. You'll inspect for structural flaws, internal defects, or missing welds, and accept, reject, or request rework of defective or malfunctioning units or systems. To be considered for this role, you will have a High School Diploma or GED and typically 5+ years of relevant experience.

Quality Control Inspector IV - 4th Shift Job duties:

* Responsible for visually inspecting our materials, parts, and products at different stages of production, as well as recording observations and making recommendations for improving processes.
* Perform accurate mechanical, physical and visual inspection of raw materials, components, and sub-assemblies per Inspection Plans, drawings and other specification requirements.
* Perform product identification and traceability activities, as required.
* Participates in in-process and final inspection as needed.
* As needed, assist Quality Engineers with conduct of First Article, in-process, and final inspections.

Qualifications:

* High School Diploma or equivalent.
* 2-5 years' experience in a Manufacturing Quality Control environment.
* Previous mechanical inspection background with ability to use Faro-Laser System, CMM (preferably Zeiss), Romer, Laser Tracker and basic hand measurement tools (calipers, micrometers, thread gauges etc.).
* Proficient with geometry and trigonometry (machine shop math).
* Knowledge and ability to interpret Geometric Dimensioning & Tolerance per ASME Y14.5.

Pay Range: Up to $34/hr DOE

If you are interested in this Quality Control Inspector IV - 4th Shift position in Louisville, CO please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 315773
Job Location: Louisville, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 09/03/2021
Last Updated: 09/20/2021
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Quality Engineer

Description:
A Manufacturing Quality Engineer job is currently available at Belcan in Santa Clara, CA. This is a full time, long term contract position. Great matching candidates will have at least three years of experience in the quality engineering field ideally within the aerospace & electronics industries. You will be performing various quality engineering tasks within both shop and office settings: FAI's, inspection techniques, ISO 9001 & AS9100 quality practices, creation of standard work, supplier assessments and approvals, and root cause/corrective actions (RCCA).

Manufacturing Quality Engineer job duties:
* Creation and modification of standard work for internal quality processes
* Assist team in tracking, documenting, and dispositioning non-conforming hardware using various quality tools.
* Inspection of parts (if needed) at the customer facility, and also local third part facility.
* Engineering drawing review and approvals
* Review of FAI (first article inspection) reports and validity of part conformance
* Creation of quality notifications within SAP, with ability to disposition quality notifications accurately.
* Determine and help implement corrective action and mistake proofing
* Supplier assessments and approval
* Supplier Development

Qualifications:
* Legal authorization to work in the US required: Due to the nature of this work, US CITIZENSHIP is required
* Associate degree in Engineering (minimum)
* Three+ years of quality engineering experience within the aerospace industry
* Strong familiarity with IPC-A-610; certification desired
* Knowledge of ISO and AS9100 quality requirements
* Knowledge of manufacturing practices
* Knowledge of blueprints and supporting specifications
* Familiarity with PPAP or PFMEA's
* Familiarity of using statistical analysis (SPC)

Desired but not required skills:
* SAP knowledge
* Lean Six Sigma experience
* External (supplier) auditing experience

If you are interested in this Manufacturing Quality Engineer job in Santa Clara, CA please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.

Belcan is an equal opportunity employer. EOE/M/F/D/V

Build a challenging and rewarding career with an industry leader!

www.BELCAN.com
 
Job Number: 313631
Job Location: Santa Clara, CA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 06/22/2021
Last Updated: 12/21/2021
Firm Name: BELCAN TECHSERVICES
Attention: VanessaRiley
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Engineer II

Description:
A Quality Engineer II job in Louisville, CO is currently available through Belcan. In this role, you will be responsible for ensuring all quality standards are met for product and production equipment. You will also participate in the designing and testing of processes, mechanisms, and equipment, and development of standardized quality acceptance criteria. To be considered for this role, you will have a Bachelors degree in a related field and typically 3 years of relevant experience.

Quality Engineer II Job duties:

* Ensure all quality standards are met for our products and production equipment.
* Participate in the designing and testing of our processes, mechanisms, and equipment, and development of standardized quality acceptance criteria.
* Write inspection procedure, assist in reviewing and evaluating in-process rejections, obtain disposition, and implement corrective action as needed, as well as participate in audits.
* Provide support during planning, organizing, and conducting of our projects involving the design and development of new evaluation and control processes utilizing statistical analysis and other control/risk mitigation techniques.

Qualifications:

* Knowledge of Quality System requirements and contract quality requirements.
* Experience in manufacturing and inspection.
* Ability to read and interpret technical drawings and schematics, parts lists, specifications, instructions, and test procedures.
* Knowledge of ISO9001, AS9100 standards.
* The ability to obtain and maintain a Security Clearance may be required.

Pay Range: Up to $46/hr DOE

If you are interested in this Quality Engineer II position in Louisville, CO please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 313779
Job Location: Louisville, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 06/26/2021
Last Updated: 03/11/2022
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Engineers - Aerospace / Aviation / Aircraft - 3 Openings

Description:
Do you have a valid Passport? This is preferred to start in Europe for the first 21 days.
Aerospace / Aviation / Aircraft Quality Engineers Needed.
MUST have either Landing Gears OR Arresting Gears experience.

As a supplier quality engineer, you engineer and communicate the product and system requirements to the supplier and participate and orchestra the plan for qualification (FAI and PPAP) from the supplier to reach a qualified product on time.
You regularly monitor the quality performance of suppliers and perform reviews and take actions depending on the cause of any problem (assessments, problem solving activities, etc) to secure continuous compliance .
You must be able to manage the supply chain out of a quality performance aspect, serve as the liaison for suppliers, suggest structural quality and process improvements, and collaborate with other engineers in a team environment.

Responsibilities
Review Supplier First Article- Communicate to SQE at Designing Organisation
• Have frequent contact with supplier to monitor actions within Quality
• Analyze suppliers quality performance and identify improvement areas.
• Handle supplier non conformance including cause and corrective action, in order to be up-to date with the supplier performance
• Handle escape incl root cause investigation, containment and corrective actions, Participate in 8D investigations
• Issue authorizations of “Request for Pre-Release” non-complex
• Participate in supplier work transfer evaluation and monitoring, non-complex
• Support concurrent engineering between us and supplier (design for manufacturing)
• Support in supplier feedback
• Communicate with Release Agents and Monitor their Performance

Qualifications
• Minimal Bachelor level in Aerospace Engineering; Mechanical Engineering or similar;
• Experience from manufacturing engineering/production, preferably product qualification activities or inspection/control;
• Knowledge of aerospace quality requirements (AS9100, NADCAP, etc.)
• Skilled in root cause analysis, 8D and continuous improvement;
• Well organized and structured with strong skills to work both independently, and in a team
• Target-oriented and outgoing with good communication skills
• Knowledge of aerospace products, processes and technologies
• Experience and skilled with Microsoft office, and ERP systems

The Structures Company LLC is an AA/EOE.
 
Rate: $60-67/hr DOE
Per Diem: Yes
Overtime: Possible
Duration: 6-12 months
Start Date: 2-4 weeks
Input Date: 08/25/2021
Last Updated: 09/22/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Inspector II (Laser-FARO)

Description:
A Quality Inspector II (Laser-FARO) job in Louisville, CO is currently available through Belcan. In this role, you will be responsible for using your skills and expertise to ensure that our incoming parts, in-process production, and shipped product fulfill all quality requirements. To be considered for this role, you will have a High School Diploma or GED equivalent and typically 2 or more years of experience.

Quality Inspector II (Laser-FARO) Job duties:

* Ensure that our incoming parts, in-process production, and shipped product fulfill all quality requirements.
* Responsible for visually inspecting our materials, parts, and products at different stages of production, as well as recording observations and making recommendations for improving processes.
* Inspect for structural flaws, internal defects, or missing welds, and accept, reject, or request rework of defective or malfunctioning units or systems.
* Apply quality standards for receiving, in-process and final inspection.


Qualifications:

* Knowledge and ability to understand and interpret technical schematics and drawings.
* Knowledge and ability to interpret geometric dimensioning and tolerance.
* Experience with finished goods inspection.
* Working knowledge of ISO 9000 and AS 9100 standards.

Pay Range: Up to $25.50/hr DOE

If you are interested in this Quality Inspector II (Laser-FARO) position in Louisville, CO please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 315092
Job Location: Louisville, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/10/2021
Last Updated: 10/04/2021
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Inspector IV (Laser-FARO)

Description:
A Quality Inspector IV (Laser-FARO) job in Louisville, CO is currently available through Belcan. In this role, you will be responsible for performing inspection duties to ensure that incoming parts, in-process production and shipped product fulfill all company quality requirements. To be considered for this role, you will have a High School Diploma or equivalent, plus a minimum of 5 years of experience in mechanical inspection and inspection techniques.

Quality Inspector IV (Laser-FARO) Job duties:

* Receiving and Production Inspection.
* Inspect and file/record incoming part history records.
* Perform accurate mechanical, physical and visual inspection of raw materials, components, and sub-assemblies per Inspection Plans, drawings and other specification requirements.
* Read and interpret specifications and part prints.
* Initiate nonconformance reports (NCs) as required.

Qualifications:

* 2-5 years' experience in a Manufacturing Quality Control environment.
* Previous mechanical inspection background with ability to use Faro-Laser System, CMM (preferably Zeiss), Romer, Laser Tracker and basic hand measurement tools (calipers, micrometers, thread gauges etc.).
* As required by site, knowledge of and ability to use a wide range of higher precision measuring or Non-Destructive Evaluation equipment.
* Knowledge and ability to interpret Geometric Dimensioning & Tolerance per ASME Y14.5M.

Pay Rate: Up to $34.00/hr DOE

If you are interested in this Inspector IV (Laser-FARO) position in Louisville, CO please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.


 
Job Number: 313939
Job Location: Louisville, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/01/2021
Last Updated: 10/04/2021
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Recruiter

Description:
A Recruiter role located in the Greater Seattle area is currently available through Belcan. In the Recruiter role you will assists the Human Resources Department in the function of attracting top talent. To perform this job successfully, an individual will partner with the HR Business Partners and the hiring managers to complete the full lifecycle of the employment process which includes recruiting, screening, interviewing, and closing the candidate.

Recruiter job duties:

* Recruit, research, interview, screen, and refer job candidates for job openings
* Utilize Internet online recruiting sources to identify and recruit a diverse pool of candidates
* Complete relevant updates, status reports and statistics for all positions
* Partner with management and supervisors to identify personnel needs, job specifications, job
duties, qualifications and drive diversity within the organization
* Initiate contact with potentially qualified candidates for specific job openings
* Review applications and interviews candidates to obtain work history, education, training, job
skills, and salary requirements, and provides information about the organization and position
* Screen and refer candidates for additional interviews with others in organization
* Write and place job advertising in various media
* Develop and coordinate internal and external job posting program which complies to the
Company's AAP
* Coordinate communications with applicants
* Any other task assigned by supervisor or management
* File and maintain employment records for future references

EDUCATION AND EXPERIENCE REQUIRED:

* High School Diploma or equivalent
* 4+ years of recruiting experience in a high volume, high growth environment
* Experience working face to face with VPs, directors and managers, providing guidance, and
direction to ensure a great experience for candidates and hiring teams
* Understanding of all practices and responsibilities of non-exempt, exempt technical, professional
and managerial positions
* Ability to successfully assess the candidates' potential and articulate skill set to hiring managers
* Ability to prioritize, stay organized, set clear expectations and drive the hiring process while
delivering expert support and results
* Ability to handle a large number of requisitions at once, ranging from individual contributor up to
Director level roles with varying levels of complexity
* Excellent marketing skills with the ability to effectively source and engage passive candidates
using various external tools
* Ability to effectively build relationships at all levels of the organization and externally with
candidates and a variety of agencies and vendors
* Knowledge of and ability to use applicant tracking systems
* Excellent technical skills and attention to detail

If you are interested in this Recruiter role located in the Greater Seattle area please apply via the 'apply now' link provided.

Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.



 
Job Number: 312509
Job Location: Lynnwood, WA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 05/13/2021
Last Updated: 09/16/2021
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Reliability Engineer

Description:
Inconen is looking for a Reliability Engineer for our client, a well-known Aerospace Company, in Camden, AR.

**Candidates must be U.S. Citizens without Dual Citizenship**

Duties:
-Our client is looking for a Reliability Engineer to help them oversee certain aspects of their operations.
-In this role, you will perform preventative and predictive maintenance on our tools and equipment.
-We consider these value-added tasks because they help keep our production costs down by preventing interruptions.
-You will also conduct a variety of failure mode and effects analysis (FMEA) and root cause analysis tasks, identifying potential risks to our operations and developing corrective actions.
-In this role, you will contribute to our continual improvement process and help strengthen the overall viability of our company.
-Applicants should have a bachelor’s or master’s degree in mechanical engineering.

Skills:
Required:
-Ensure the reliability of equipment and processes
-Perform preventative and predictive maintenance
-Conduct a variety of failure analyses, including root cause and fault tree analysis
-Identify risks to business operations and develop corrective actions
-Contribute to the continual improvement process

Desired:
-Bachelor’s degree in mechanical or electrical engineering; master’s degree preferred
-Professional experience in manufacturing/production and reliability
-Data analytics skills
-Mechanical and electrical aptitude
-Familiarity with Six Sigma methodology
-Analytical skills

Education:
-Bachelor’s or Master’s degree
-5+ years of related experience
 
Job Number: 15565
Job Location: Camden, AR
Rate: $60.00 - $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 Mos
Start Date: ASAP
Input Date: 08/19/2021
Last Updated: 09/16/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Reliability and Maintainability Engineer

Description:
A Reliability and Maintainability Engineer job is currently available at Belcan in Shelton, CT. This can be a remote position; however, must be located near one of our Belcan delivery centers in the U.S. This is a full time, direct job with full benefits. Great matching candidates will have a Bachelors degree in Engineering and 3+ years direct R&M experience in Aerospace . You will be supporting the near- and longer-term activities on an aircraft program as it nears completion for customer delivery.

Reliability& Maintainability Engineer job duties:
* Lead RCCA activities for hardware related issues encountered during ground and flight testing Generate common failure modes as part of the analysis, understanding where the gaps are with respect to current LRU supplier MTBFs.
* Review all existing aircraft and supplier data and RCCA's to track failures to flight hours and develop system level MTBF's
* Assist in developing overall warranty support costs of the product based on existing and in coming field data as received from FSR's and customer representatives.
* Development of Reliability Block Diagrams to represent the reliability relationship between components of a system and allow for the development of block failure models used to evaluate the reliability of a system and obtain life/event data concerning each component/subsystem.
* Develop Failure Mode and Effects Analysis which involves reviewing components, assemblies, and subsystems to identify failure modes, and their causes and effects. For each component, the failure modes and their resulting effects on the rest of the system are recorded in a specific FMEA worksheet.
* Development of Criticality Analysis which is used to chart the probability of failure modes against the severity of their consequences. Criticality analysis can be done in Excel but growth into more sophisticated reliability centric software is expected. This analysis has to be done in the context of engineering design influence. Results of this analysis will integrate repair and diagnostic procedures.
* Construct integrated system reliability models from component analysis.
* Occasional travel ~10% will be required
* NOTE: Other work locations may be considered

Qualifications:
* BS Degree Engineering
* 3-5 years direct experience in Reliability and Maintainability, preferably in aerospace
* Legal authorization to work in the US required

If you are interested in this Reliability and Maintainability Engineer job in Shelton, CT please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.

Belcan is an equal opportunity employer. EOE/M/F/D/V

Build a challenging and rewarding career with an industry leader!

www.BELCAN.com

 
Job Number: 315605
Job Location: Shelton, CT
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/24/2021
Last Updated: 11/01/2021
Firm Name: BELCAN TECHSERVICES
Attention: ColleenMinello
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Seat Design Engineer 3

Description:
A Seat Design Engineer 3 job in Everett, WA is currently available through Belcan. In this Seat Design Engineer 3 role, you will be responsible for supporting Lead Engineers and/or senior level Engineers in the research, design and substantiation of the mechanical seat design within the Seat Engineering department utilizing established modeling and drafting standards. The Seat Design Engineer (SDE) 3 will support design and development of engineering packages based on customer and OEM requirements for production, retrofit applications and product development.

Seat Design Engineer 3 duties:

* Works under the direction of an experienced engineer, maintains or modifies basic mechanical
seat assemblies or components based on defined requirements using approved processes and
tools.
* Participates in teams to support the development of designs. Supports the documentation of
design implementation.
* Obtain, interpret, and analyze OEM airplane seat install or layout drawings using approved
processes and tools.
* Provides liaison support for assigned duties to manufacturing and/or in-service issues.
* Troubleshoots basic mechanical seat systems problems.
* Actively support engineering department goals and initiatives.
* Coordinate with other departments as necessary.
* Utilize internal drawing/document standards per customer or regulatory agency requirements.
* Perform engineering design checks and sign documents, with periodical technical guidance from
mentor and lead.
* Perform engineering design analysis (such as preliminary Stress analysis or Kinematics
Analysis), design validation (such as validate analysis models against test data) and task scope
(such as work scope validation).
* Perform engineering design/analysis with minimum technical guidance.
* Some domestic or international travel may be required.

EDUCATION AND EXPERIENCE REQUIRED:

* BS degree Mechanical Engineering, Aerospace Engineering or related Engineering field (4-6
years' experience) or equivalent working experience (12 years minimum in an aerospace related
field).
* Drafting skills in CATIA V5 (or higher) and/or Solidworks preferred.
* Must be able to provide complicated lay-outs and program design studies.
* Must be able to interact successfully with engineering, supply chain, and manufacturing
departments.
* Must be able to function as part of a design team.
* Thorough understanding of manufacturing processes preferred.
* Understanding of Boeing/Aircraft/SAE Seat Design Standards/Requirements

If you are interested in this Seat Design Engineer 3 role located in Everett, WA please apply via the 'apply now' link provided.

Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.



 
Job Number: 315769
Job Location: Everett, WA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/28/2021
Last Updated: 09/21/2021
Firm Name: BELCAN TECHSERVICES
Attention: FrancisOsolnick
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Electrical Design Engineer

Description:
A Senior Electrical Design Engineer job in Shawnee, OK is currently available through Belcan. In this role, you will design high performance and reliability electronics for high tech aerospace applications, and oversee development activities related to product qualification, approval and launch. To be considered for this role, you must be a self-starter with strong communication skills, and an understanding of EMI/EMC, MTBF and FMEA.

Senior Electrical Design Engineer Job Duties
* Design and/or development of new products based on customer specs and customer requirements
* Evaluate existing designs for incorporation into newly developed products
* Oversee product drawings, tests, and specifications for newly designed products
* Evaluate and analyze requirements for qualification procedures
* Create appropriate test flows, test designs, and analyses to incorporate design requirement verification
* Analyzing statement of work (SOW) for supporting solicitation process
* Create schematics and board layout
* Obtain, review, and maintain necessary specifications to define projects
* Perform functional and theoretical analyses on designed products
* Oversee and assist with ATP's, QTP's, customer deliverables, and SAR packages
* Maintain familiarity with a variety of latest concepts, practices and procedures
* Skilled user of Microsoft Office Products (Excel, Word) and Design software

Qualifications
* Bachelors Degree in Engineering or 15+ years of relevant experience in related field
* Analog and digital circuits capture and layout
* High speed analog acquisition
* Microcontroller and FPGA interfaces and programming
* Firm understanding of DO-160 and mil standard 810 development and testing

If you are interested in this Senior Electrical Design Engineer in Shawnee, OK, please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity

 
Job Number: 314645
Job Location: Shawnee, OK
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 09/11/2021
Last Updated: 10/29/2021
Firm Name: BELCAN TECHSERVICES
Attention: FrancisOsolnick
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Embedded Software Engineer

Description:
A Senior Embedded Software Engineer role located in Redmond, WA is currently available through Belcan. The Senior Embedded Software Engineer will develop firmware for state of are scanned laser products. This position will be responsible for a range of development activities from initial concept development, to prototype testing, through production release. A successful candidate will work in close collaboration with Digital RTL, MEMS, Electrical engineers, and software application engineers to deliver new products.

Senior Embedded Software Engineer job duties:

* Develop firmware and embedded software across the stack from IO configuration to boot loaders
to application code for MCU, FPGA, and ASIC target
* Bring up an integration of new designs
* Design and implementation of control loops in embedded Linus and embedded real time systems
* Digital Signal Process algorithm development and optimization
* Verification testing of system performance
* Perform code reviews and provide feedback

EDUCATION AND EXPERIENCE REQUIRED

* BS or higher in Computer Science, Computer Engineering, Electrical Engineering, or related
* 5+ years of embedded software development experience
* Excellent knowledge of C and C++
* Passion for hands-on problem solving
* Proficiency in Python and/or other modern scripting and automation languages
* Familiarity with MicroC/OS or Embedded Linus
* Understanding programming/debugging real time embedded devices with ARM microcontrollers
* Knowledge of engineering best practices for the full product development lifecycle, including
design reviews, coding standards, code reviews, source control management, build processes,
and testing
* Solid communication, ability to understand complex systems and work in a fast-paced
environment
* Bootloader or Secure Boot experience a plus
* Excellent verbal and written communications skills in English


If you are interested in this Senior Embedded Software Engineer role located in Redmond, WA please apply via the 'apply now' link provided.

Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.


 
Job Number: 315574
Job Location: Redmond, WA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/24/2021
Last Updated: 11/12/2021
Firm Name: BELCAN TECHSERVICES
Attention: ScottWatkins
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Engineering Technician

Description:
A Senior Engineering Technician job in Irvine, CA is currently available through Belcan. In this role, you will support engineering activities such as design, test, check-out, modification, fabrication and assembly of prototype electro mechanical systems, experimental design circuitry, laser/light transmission devices or specialized test equipment. To be considered for this role, you will have an Associate's degree in related discipline or equivalent plus a minimum of 1 year of relevant experience. Due to the nature of the work performed in this facility, US citizenship is required.

Senior Engineering Technician Job duties:

* Layout, build, test, troubleshoot, repair and modify electronic or electro-mechanical devices, assemblies, subsystems, and systems
* Construct, troubleshoot, calibrate, adjust, test, diagnose and maintain equipment, components, devices, or systems
* Calibration and alignment checks
* Prepare prescribed compounds and solutions
* Construct, modify, debug, test and adjust a variety of tools and equipment given appropriate drawings, parts and instructions
* Implement basic practical solutions for process improvement
* Conduct and document experiments under guidance of senior technician
* Construct basis tooling and fixtures to accomplish unique tasks
* Organize data to identify cause/effect relationships and recommends resolution/process improvement

Qualifications:

* An Associate's degree in related discipline or equivalent plus a minimum of 1 year of relevant experience
* Fundamental knowledge and proficiency in the use of related tools and equipment
* Ability to fabricate simple hardware as required
* May require 1st Class FCC license and Solder Repair certification
* Clear computer and test equipment knowledge


If you are interested in this Senior Engineering Technician position in Irvine, CA please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 315535
Job Location: Irvine, CA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/20/2021
Last Updated: 10/27/2021
Firm Name: BELCAN TECHSERVICES
Attention: FrancisOsolnick
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Manager Propulsion & Fuel Systems

Description:
General Summary:
The Senior Manager of Propulsion & Fuel Systems is responsible to lead, and manage the day to day activities of the Propulsion & Fuel Systems Engineering Team to meet Program objectives. This team is responsible for the design integration of the engine, engine control system, and fuel system with the aircraft both mechanically and electronically. This includes managing the engine and fuel systems suppliers, defining and managing mechanical and electrical interfaces, and defining requirements for aircraft cockpit displays and indications to ensure safe and compliant operation, in line with all regulatory requirements and guidance material under both normal and abnormal operating conditions.

The scope of responsibility includes New Product Development and the Sustaining activities of the existing fleet.

Duties and Responsibilities:
1. Communicates effectively in both verbal and written format. Candidate should have strong presentation skills, and able to adjust communication content and approach based on audience.
2. Manages the task execution of the team to ensure on-schedule & to requirements completion.
3. Exercises tested and proven techniques to determine problem root cause and develop corrective action plans and solutions.
4. Coaches, develops, and motivates team members to achieve full potential.
5. Ensures the team works efficiently, and produces work of a high technical standard, that is fully vetted before presenting to company leadership, company DER’s or certification authorities.
6. Has a process improvement mentality, but equally a focus on design improvement and product innovation.
7. Identifies resource problems early, takes corrective action within team, or justifies need for additional resources, or support from other teams, based on quantitative analysis.
8. Interface with engine & fuel system suppliers to manage new design or enhance existing designs to meet aircraft level performance, weight, certification and cost requirements.
9. Support supplier qualification testing, and HACI flight testing as required.
10. Able to manage the certification requirements of major and minor design change projects.
11. Set departmental objectives and conduct evaluations, to ensure team is held accountable for their personal performance.



Education, Work Experience, Certification and/or Licensure:
1. BS in a related Engineering discipline, with 10-15 years directly related experience, including 5 years in a supervisory role.
2. Previous aerospace experience at aircraft OEM and / or engine manufacturer, with experience in a similar role.
3. Some Travel may be required.

Knowledge, Skills and Abilities:
1. Familiar with industry documentation for design, test, and certification of propulsion and fuel systems
2. Familiarization with both Part 33 & Part 23 FAR requirements (Or Part 33 & Part 25)
3. Familiar with Industry standards such including DO-160, DO-178, DO-254, MIL-HDBKs and SAE ARPs, including 4761 & 4754A.
4. Familiar with analytical & design tools and processes.
5. Proven record of leading and managing diverse engineering teams to achieve objectives.
6. Proficient in Microsoft Office Products.

Physical Requirements:
1. Incumbents may be occasionally exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
2. Position involves primarily desk work with a computer.
3. Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
4. Comprehend and adhere to management directions and/or safety instructions with no restrictions.
5. Effectively communicate in Business English language.
6. Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.


LARGE GAPS IN WORK HISTORY WILL DISQUALIFY
 
Job Number: N/A
Job Location: Greensboro, NC
Rate: DOE
Per Diem: Relocation
Overtime: N/A
Duration: Permanent
Start Date: Asap
Input Date: 09/21/2021
Last Updated: 05/01/2023
Firm Name: STRUCTURES COMPANY LLC
Attention: Garrett Smart
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Manufacturing Engineer

Description:
A Senior Manufacturing Engineer job is currently available at Belcan in Wichita KS. This is a full time, direct job with full benefits. Great matching candidates will have several years of hands on experience involving machining, shop floor activities, assembly, and tooling, etc.. You will be working in our customer's environment and providing technical expertise in relationship to manufacturing support, troubleshooting, process improvement, insight to quality engineering, and project management.

---> NOTE: Because this is a Department of Defense project, it will be necessary to have or to obtain a DoD Security Clearance. For this, US Citizenship is mandatory. If you do not have a clearance, we can obtain one for you after hire.

Manufacturing Engineer job duties:
* Act as a team member on varying programs and projects, presenting information as needed, and ensuring critical customer needs are met.
* Troubleshoot major material process problems, evaluate scrap out-of-flow material, implement existing or develop new approaches and special projects to solve the issues.
* Troubleshoot, evaluate, make suggestions involving the assembly process, machinery, tooling, gage alternatives, etc.
* FAIRs and LAIRs - review, define, identify, analyze, and resolve all process, forms, drawing characteristics, data, discrepancies, inspections, paperwork, and flow associated with this prior to on-site processing.
* Heavily involved with presenting of the on-site information process, customer procedures, supporting documentation, forms, drawings, production, inspections, quality resolution, etc.
* Identify, act, and complete efforts related to PFMEA's and Effects of Failure and the recommended actions and assignments for preventative and corrective needs.
* Develop and Complete RFT's (Right the First Time), time studies, cycle time, MSA evaluations, etc.
* Write and create new work instructions, update existing work instructions, and make edits for new and existing parts.
* Assist, edit, troubleshoot, and resolve needs within the manufacturing process, various APQP processes, package and relocation support, supply chain, CNC machines and programming, cutting tools, components and parts, unique parts, scrap, etc.
* Communicate and interact with shop floor personnel, quality/process teams, customer management team, material teams, purchasing teams and other engineers involved in the process.
* Mentoring additional team members on customer and industry standards

Manufacturing Engineer Qualifications:
* M.S or B.S. in Manufacturing Engineering, Industrial Engineering, Mechanical Engineering, Manufacturing Technology, Automotive and Assembly, etc. or equivalent amount of work experience involving manufacturing engineering.
* 10+ years of relevant work experience as a manufacturing engineer.
* Experience and working knowledge of manufacturing process, assembly, and fabrication process.
* Experience with aerospace, heavy equipment, industrial equipment, and/or automotive industries.
* Experience creating and updating technical documents, reports, and standards.
* Excellent oral and written communication skills.
* Extensive understanding of product engineering concepts and applications.
* Ability to be a self-starter with potential for technical leadership and guidance.
* Strong analytical reasoning and problem-solving skills.
* Ability to communicate technical information effectively with team members, as well as to managers and engineers in client business units.
* Legal authorization to work in the US required
* Active Security Clearance is preferred

Desired but not required skills:
* Mechanical aptitude and an understanding of design for manufacturing concepts.
* Hands on experience in the shop/manufacturing environment
* Thorough understanding for air frame manufacturing
* Understanding of Mechanics of Materials and Structural Design.
* Knowledge of CAD Modeling (2D, 3D).
* Proficiency in MS Office products
* Experience with Cost reduction.
* Knowledge and experience with application of Six Sigma, lean manufacturing, Kaizen, etc.

If you are interested in this Senior Manufacturing Engineering job in Wichita KS please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.

Belcan is an equal opportunity employer. EOE/M/F/D/V

Build a challenging and rewarding career with an industry leader!

www.BELCAN.com

 
Job Number: 314810
Job Location: Wichita, KS
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/30/2021
Last Updated: 03/04/2022
Firm Name: BELCAN TECHSERVICES
Attention: KennetaFabing
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Optical Engineer

Description:
A Senior Optical Engineer role located in Redmond, WA is currently available through Belcan. The Senior Optical Engineer will work directly with Optical and Systems engineers as well as with the Electrical and Mechanical Engineering teams. You will be responsible for optical modelling, optical testing, and system analysis for automotive lidar products.

Senior Optical Engineer job duties:

* Develop and analyze micro-optical models in Zemax for product development and concept
studies
* Develop and validate optical performance models in Matlab and Simulink
* Design and develop optics for lidar products from conceptual design through manufacturing
release (beam shaping, wavelength or polarization combining, distortion correction)
* Design and execute testing of optical components, diode lasers, optical sub-systems and
complete products. Report results to engineering team and management

EDUCATION AND EXPERIENCE REQUIRED

* BS in Optical Engineering or related field
* 7+ years of product focused optical engineering
* 5+ years of Zemax designing experience
* Proven Experience with optical scanning systems
* Experience supporting optical products from the concept stage through final release
* Demonstrated experience using Zemax, Code V, or related design system for geometric optics
(sequential and nonsequential) physical optics, optimization, tolerancing and sensitivity analysis
* Experience with equipment methods for aligning complex optical systems
* Experience designing lenses, free form optics and beam shaping optics for laser systems
* Experience with equip and instrumentation to measure optical power, beam characteristics,
polarization, bean alignment, etc.
* Hands on experience with laser diodes, lenses, prisms, and other optical components to build
and test prototypes and components
* Knowledge of Python and Matlab
* Experience with basic statistics, writing and executing detailed test plans, and preparing
technical reports
* Solid communication and problems solving skills, ability to understand complex systems and
ability to work in a fast-paced environment
* Excellent verbal and written communications skills in English

If you are interested in this Senior Optical Engineer role located in Redmond, WA please apply via the 'apply now' link provided.

Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.


 
Job Number: 315569
Job Location: Redmond, WA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/24/2021
Last Updated: 11/15/2021
Firm Name: BELCAN TECHSERVICES
Attention: FrancisOsolnick
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Solderer

Description:
A Senior Solderer job in Scottsdale, AZ is currently available through Belcan. In this role, you will perform project tasks/assignments of moderately complex nature ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables. To be considered for this role, you will have a High School Diploma or equivalent, plus a minimum of 6 years of relevant experience. An AA Degree or certification in manufacturing area preferred Due to the nature of the work performed in this facility, US citizenship is required.

Senior Solderer Job duties:

* Perform fabrication or inspection functions in a research, production or pre-production environment by building or integrating hardware for prototypes, assemblies and large complex systems, soldering ribbons/strip line skills for RF performance
* Previous J-STD-001 space addendum or NASA 8739 certification is preferred

Qualifications:

* A High School diploma or equivalent plus a minimum of 6 years of relevant experience. An AA Degree or certification in manufacturing area preferred
* Ability to solder complex assemblies, small jumper wires.
* Ability to read a drawing, and wire list
* Ability to perform more advanced fabrication and marking
* Distinct communication and computer skills
* Solid knowledge of Statistics and SPC applications

If you are interested in this Senior Solderer position in Scottsdale, AZ please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 313660
Job Location: Scottsdale, AZ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/02/2021
Last Updated: 10/20/2021
Firm Name: BELCAN TECHSERVICES
Attention: ScottWatkins
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Stress Engineer

Description:
Experienced senior/lead aerospace stress engineer with significant experience in the analysis, certification and testing of metallic and composite primary structure.

Duties and Responsibilities:
Serve as subject matter expert stress engineer responsible for metallic primary structure. Provide leadership and guidance to a group of contract and associate stress engineers working on certification, analysis and testing. Experience writing certification stress reports, working with FAA DER's and structural testing needed. Applicant must be competent in both classic hand analysis (Bruhn, Peery, Roark, ESDU) methods as well as FEA. Must also have the ability to explain and present analysis and assumptions in a rational manner.

Must be able to work in a dynamic and challenging environment where you will be expected to take ownership of assigned projects and see them through to completion.

Provide recommendations and status updates to management.

Education, Work Experience, Certification and/or Licensure:
BS required, MS preferred Aerospace or Mechanical Engineering
FAA DER is a major plus but not required. (14 CFR 23/25)

Knowledge, Skills and Abilities:
Experience with 3D solid modeling (CATIA v5, Unigraphics)
Experience with programming languages (Python, VB, Matlab)
Expert in Finite Element Analysis (NASTRAN, ABAQUS)
Proficient computer skills with MS Word, MS Excel, MS PowerPoint, MS Project

Physical Requirements:
1. Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
2. Incumbents may be required to stand, sit, squat, walk, bend, climb ladders, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
3. Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
4. Read, hear, speak, and see with no restrictions, as required by job duties.
5. Comprehend and adhere to management directions and/or safety instructions with no restrictions.
6. Effectively communicate in Business English language.
7. Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.
8. Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties.
 
Job Number: 28-024
Job Location: Greensboro, NC
Rate: $50-$70/hr
Per Diem: Yes
Overtime: Possible
Duration: 1+ years
Start Date: ASAP
Input Date: 08/23/2021
Last Updated: 09/27/2021
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Supply Management Analysts

Description:
STS Technical Services is hiring Senior Supply Management Analysts in Wauwatosa, Wisconsin. 

Essential Duties & Responsibilities:
This position is responsible for supporting product development as it relates to purchasing activity for systems and components ranging from concept and process selection, cost modeling, and project management.
This position takes a lead part in component development activity related to new product launches, builds, and purchasing processes.
Responsible for multiple component cost, quality, and timing requirements per business case commitments.
Demonstrates working knowledge and experience in working with suppliers and engagement in the product development process.
Impacts quality of their own work through assessing risk and proactively mitigate, manage, and escalate appropriately as well as the work of others on their team.
Solves supplier management problems by analyzing possible solutions using technical experience, judgment with a moderate level of guidance and direction.
Provides informal guidance to new Product Development Purchasing team members and impacts the work of others within the group.
Effectively communicate complex information involving Project teams, engineering system groups, suppliers, parts and accessories, and our client's operations purchasing personnel.
Knowledge, Skills & Abilities:
Ability to analyze and manage components through process and product verification, validation, and product launch.
Ability to drive results with a moderate level of guidance and direction.
Demonstrated knowledge of production or procurement of components and subsystems, Capability Studies, Process Failure Mode Effects Analysis (PFMEAs), Control Plans, just-in-time (JIT) manufacturing, cost management tools, other quality and continuous improvement tools, and implementing strategic purchasing relationships with suppliers.
Demonstrated ability to work effectively within a group and/or team and provide guidance to new team members.
Educational & Experience Requirements:
Typically requires a minimum of 5 years of related experience.
About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a recruiting professional directly, please call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.

#ZR
 
Job Number: 37725
Job Location: Wauwatosa, WI
Input Date: 09/10/2021
Firm Name: STS AEROSTAFF SERVICES
Attention: Monique Stevens
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Test Engineer - Airframe - MUST BE US Persons

Description:
We are seeking an experienced Senior Test Engineer to support Structural Testing of components, assemblies, and integrated airframes. The main tasks of this role is to is to collect test requirements, write test plans, design test stands and execute tests under the direction of the Engineering lead and/or Manager. Engineers in this position are expected to have knowledge of industry standard test practices and methods. This role will provide test engineering support to engineering design and analysis groups in a rapid prototyping environment.

Professional Requirements
• 5 years or more experience in aerospace with an emphasis on aerospace structural testing or equivalent laboratory test engineering experience.
• CAD modelling experience – Experience with Catia V5 preferred
• Experience with simulation and finite element analysis preferred – NASTRAN, Femap
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
• Experience with MTS or equivalent Controls and Data Programs.
• Results oriented, focused on safety, reliability and deliverables to completing test activities successfully.
• Excellent verbal and written communication skills
• Excellent Organizational Skills and Problem-solving Skills
• Strong team player.
• Excellent computer skills, including Outlook, Word, Excel and PowerPoint
• Applicants must be U.S. persons

Education and Experience Required. Bachelor’s degree in Aerospace or Mechanical Engineering from an accredited institution, with a concentration in Design, Structures, Testing or Materials.

The Structures Company LLC is an AA/EOE
 
Job Location: Mojave, CA
Rate: DOE
Per Diem: Yes
Overtime: Possible
Duration: Long-term
Start Date: ASAP
Input Date: 08/13/2021
Last Updated: 01/26/2023
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Test Engineer - Systems - MUST BE US Persons

Description:
We are seeking an experienced Senior level test engineer to support structures, systems and avionics testing of components, assemblies, and integrated airframes. The main tasks of this role is to is to collect test requirements, write test plans, design test stands and execute tests under the direction of the Engineering lead and/or Manager. Engineers in this position are expected to have knowledge of industry standard test practices and methods. This role will provide test engineering support to engineering design and analysis groups in a rapid prototyping environment.

Professional Requirements
• 5 years or more experience in aerospace with an emphasis on testing or equivalent laboratory test engineering experience
• Fixture Design and Analysis
• Vibration fixture modal analysis
• Control, instrumentation, and data acquisition for variety of environmental tests of avionics and mech systems
• CAD modelling experience – Experience with Catia V5 preferred
• Experience with simulation and finite element analysis preferred – NASTRAN, Femap
• Experience with DO-160 environmental test standards for mechanical systems
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
• Focus on safety and reliability in testing.
• Results oriented approach to completing test activities successfully.
• Excellent verbal and written communication skills
• Excellent Organizational Skills and problem-solving skills
• Strong team player.
• Ability to perform at a high level with minimal direction.
• Excellent computer skills, including Outlook, Word, Excel and PowerPoint
• Applicants must be U.S. persons

Education and Experience. Bachelor’s degree from an accredited institution, with a concentration in a relevant Engineering discipline.

The Structures Company LLC is an AA/EOE
 
Job Location: Mojave, CA
Rate: DOE
Per Diem: Yes
Overtime: Possible
Duration: Long-Term
Start Date: ASAP
Input Date: 08/13/2021
Last Updated: 08/24/2023
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Test Equipment Design Engineer

Description:
Inconen is looking for a Senior Test Equipment Design Engineer for our client, a well-known Aerospace Company, in Canoga Park, CA.

**Candidates must be U.S. Citizens without Dual Citizenship**
**Our client mandates that all employees and contractors must be fully vaccinated for COVID-19**
** This is a Temp-to-Hire role. If performance expectations are met the candidate would convert in 4 to 6 months **

Duties:
-Seeking a Senior Test Equipment Design Engineer whose area of expertise is electronics and automated test system design.
-Our automated test systems include those designed for testing power and digital electronics for space and defense applications; Units requiring automated test range from single-board computers, data acquisition boards, valve actuators to combustion and electric propulsion rocket engine controllers used in space-based applications.
-Automated test systems perform acceptance testing at the PWA (board) and unit (box) level.
-In this role, you will initially support a defense program. In addition, you will perform an array of technical and project engineering related duties in support of a variety of Avionics STE design projects.
-The person in this position will be responsible for hands-on test and test system design, as well as providing project management and leadership for less senior personnel.

Working under limited general direction, responsibilities include, but are not limited to:
-70% - Hands-on design and design leadership of automated test system development projects (includes hardware, software and mechanical design). Included is the development of test system requirements and verification methodologies, resolution of anomalies occurring during integration and test of a test system, as well as during subsequent delivery and test system usage.
-15% - Leading design teams of 2 or more people on automated test system development activities with cost and schedule accountability.
-5% - Supporting test system proposals and bids.
-10% - Travel to other Aerojet Rocketdyne, customer and supplier sites for design reviews and technical interface meetings.

Skills:
-Experience with scripting language such as C, C++ and/or proficient in the use of the National Instruments (NI) development suite (LabWindows/CVI, LabVIEW and TestStand).
-Hands-on experience with Test Instrumentation such as Oscilloscopes, Multiplexers, Logic Analyzers, Data Acquisition systems, etc.

Proficiency in the:
-Design of test consoles, test adapters, and/or test cables;
-Integration of test hardware and test software;
-Development of test equipment drawings;
-Development of test system requirements and verification methodologies;
-Development of test procedures;
-Troubleshooting of equipment, circuit boards, cables, etc;
-Resolution of anomalies occurring during integration and test of a test system, and also during subsequent delivery and test system usage.
-Experience in prioritizing and completing several parallel efforts.
-Demonstrated ability to work independently and drive toward goals.
-Self-motivated - willing to engage customers, partners, and suppliers to achieve results.
-Possess process discipline, order, and attention to detail.
-Must have excellent oral and written communication skills and be able to coordinate and collaborate with local/on-site teams, as well as teams at other sites.

Education:
-Bachelor of Science degree in Electrical Engineering, Computer Science or related discipline and five (5) or more years of experience (or an equivalent combination of education and experience).
 
Job Number: 16739
Job Location: Canoga Park, CA
Rate: $50.00 - $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 Mos
Start Date: ASAP
Input Date: 10/26/2021
Last Updated: 11/03/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Service Engineer

Description:
A Service Engineer job is available with a client in San Jose, CA. The individual will be responsible for working with the customer at their installation site to make certain that the equipment is installed and continues to operate properly.

Responsibilities:
* Installation of our high-tech automated systems, maintenance, service visits and repairs at our customer sites
* Technical consulting on our systems to ensure maximum operational capability and 110% customer satisfaction and promote our customer care contracts
* Co-operate closely with our automation chemists and business managers to provide technical Support
* Actively communicate customer needs and requirements to our service & support management and to the R&D department
* Support production department and perform final tests of tools and equipment
* Training of distributors and new or third-party service engineers
* Perform repairs of customer tools or modules in our repair center

Requirements:
* Solid education in electrical & mechanical engineering
* 3 Years of experience in repair and maintenance of instrumentation used in chemical laboratories (e.g. parallel synthesizers, liquid handlers, auto samplers, HPLC…)
* Enjoy direct contact with customers and frequent travel (national approx. 40-50%)
* Definite customer orientation and confidence to work independently
* General understanding of typical workflows in chemistry laboratories is a huge plus
* Solid communication skills in English, knowledge of any further language is a plus
* Solid user experience with Microsoft office products Excel and Word

THIS IS A DIRECT POSITION

If you are interested in this Service Engineer job in San Jose, CA, please apply via the 'apply now' link provided.

Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan Engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

 
Job Number: 314160
Job Location: San Jose, CA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/10/2021
Last Updated: 02/21/2022
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
SharePoint Developer II

Description:
Inconen is looking for a SharePoint Developer II for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
1. Significant experience supporting Microsoft SharePoint and implementing SharePoint based business solutions
2. Experience mentoring business users
3. Proven Agile working experience and an advocate for self-organizing teams
4. Collaboration skills with all team members, quality analysts, and designers
5. Experience with Azure DevOps is desired
6. Prefer experience with modern web development

Education and Experience Requirements:
1. Bachelor's Degree in Information Technology, Computer Science, Engineering or relevant curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Four (4) years of experience in IT applications to include design, development, test, and maintenance experience in mainframe or server-based technologies.

Other Requirements:
1. Experience with software development methodologies, the software development lifecycle (SDLC), and best practices.
2. IT Infrastructure Library (ITIL) exposure is desired.
3. Experience working in teams.
4. Proficiency with an Integrated Development Environment (IDE).
5. Proficiency with MS Office.
6. Exercise’s problem solving and creativity when developing code, to create efficient, reusable software, which results in minimal maintenance.
7. Basic communications (oral and written and interpersonal) skills. Proven ability to develop effective relationships with peers and first level management.
8. A Master’s degree may be used to offset one year of experience; PhD may offset two years of experience.
9. A credit history check from a national credit bureau will be conducted for all candidates for this position including new hires and current employees seeking promotion or transfer.

Position Purpose:
1. Responsible for developing code in support of new application functionality or defect remediation according to design specifications.
2. Works independently on difficult assignments that are broad in nature requiring originality and ingenuity with some latitude for unreviewed actions or decisions.

Principle Duties and Responsibilities:
Essential Functions:
1. Codes and documents software programs in accordance with design specifications.
2. Provides guidance to application developers.
3. Creates unit and integration test plans.
4. Performs unit and integration testing.
5. Participates in peer code reviews.
6. Supports application deployment.
7. Understands IS Security measures and current standards, practices and technology.

Additional Functions:
1. Proactively identifies opportunities to improve existing methodologies, processes or other areas of application delivery performance.
2. Proactively communicates issues and status as required.
3. May contribute to software design development.
4. Perform other duties as assigned.
 
Job Number: 16851
Job Location: Savannah, GA
Rate: $36.13 - $40.14/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 09/08/2021
Last Updated: 09/16/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Simulation Engineer

Description:
Inconen is looking for a Simulation Engineer for our client, a well-known Aerospace Company, in Savannah, GA.

Schedule: Second Shift

** Candidates must be a U.S. Citizen or Permanent Resident **

Unique Skills:
-Experience with interacting/updating/troubleshooting real time HIL simulation platforms (e.g., ADI, NI, Speedgoat)
-Aircraft system simulation experience
-Ability to read aircraft/simulation electrical drawings
-Preferred experience integrating various hardware I/O (analog, discrete, data bus, etc.) into a real time simulation platform
-Preferred experience with integration of aircraft system simulation models to corresponding real aircraft controller hardware (LRUs)
-Understanding of standard aircraft industry, I/O protocols (i.e., ARINC 429, 664, 485, 717, etc.)
-Preferred experience with rectifying lab problem reports by troubleshooting, developing solutions and implementation of any issue identified with the simulation platform, simulation models, LRU electrical connections, or auxiliary test equipment
-Preferred proficiency with the utilization of Simulink or High-level language (Fortran, C++, etc.) in a real time simulation environment
-Preferred experience with Python for the purposes of creating scripts for automation of tests or conducted on a real time simulation platform
-Ability to interact with diverse perspectives in order to satisfy lab customer requirements, questions and/or test assistance
-Position is 80% lab work and 20% desk work.


Education and Experience Requirements:
1. Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
2. Ten (10) years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

Position Purpose:
1. Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Principle Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
2. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 16854
Job Location: Savannah, GA
Rate: $68.00 - $75.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 09/16/2021
Last Updated: 11/16/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Architect

Description:
Job details: Software Architect
Job location: Fort Worth, TX
Job duration: 12 months
Job clearance: Interim Secret to start

Job description:
Seeking an experience Software Architect who can provide technical guidance on the design of scalable web based applications for Skunk Works (Lockheed Martin Advanced Development Programs) to assist in creating next generation solutions that are redefining the future of aerospace.

This position requires an experienced software architect to design a scalable, secure, and maintainable architecture for web based application called OmniView Web. The team uses a wide application of modern technical principles, theories, and concepts in the software field to develop, integrate, and test software products to meet our customer needs.

The successful candidate will work in a high-performing team and must be self-motivated with a strong work ethic, time-management, and interpersonal skills. The successful candidate must have demonstrated effective communication skills as the position will require frequent inter-organizational and outside customer interactions.

Must be a US Citizen. This position is located at a facility that requires special access and an Interim Secret security clearance to start.

Required Qualifications:
• Extensive experience with full stack web development and an understanding of modern web frameworks. Advanced experience in 1 or more of the following is required: Angular, Node.js, TypeScript,
HTML5/CSS3, C#, Java
• Experience applying Agile DevSecOps processes and tools is required.
• Ability to recommend technology stack based off of application requirements
• Experience using cloud infrastructure technologies (examples: Kubernetes, Docker, AWS/C2S)
• Demonstrated ability to define scalable, secure, and maintainable web based application architectures

Desired skills :
• Active Secret or Top Secret Clearance
• Mission Planning and Battle Management Knowledge
• WebSockets
• CesiumJS
• Agile Software Development Methodologies (e.g. Scrum, Kanban)
• Agile Process Tools (e.g. JIRA)
• Software Development Tools (e.g. Visual Studio, Eclipse)
• Software Configuration Management (e.g. git)
• Service Oriented Architecture Knowledge
• Message Broker Technologies (e.g. Active MQ)
• Protocol Buffers
• XML Schemas and XML Serialization
• RESTful interfaces
• Knowledge of UCI
• Kubernetes
• Docker
• KeyCloak w/ OAuth2.0
• Nginx
• .NET 5.0

Comments:

This is an architect position, the ideal candidate has experience recommending software stacks to meet project needs. Experience communicating pros and cons for various technologies is required.


Required Qualifications:
• Extensive experience with full stack web development and an understanding of modern web frameworks. Advanced experience in 1 or more of the following is required: Angular, Node.js, TypeScript,
HTML5/CSS3, C#, Java
• Experience applying Agile DevSecOps processes and tools is required.
• Ability to recommend technology stack based off of application requirements
• Experience using cloud infrastructure technologies (examples: Kubernetes, Docker, AWS/C2S)
• Demonstrated ability to define scalable, secure, and maintainable web based application architectures.



Skills: Category Name Required Importance Experience
Areas of Expertise Architectural concepts Yes 1 4 - 6 Years
Software Skills Java Script - Advanced Yes 4 6 + Years
Technical Skills Software design principles Yes 3 6 + Years
Technical Skills Web Development Yes 2 4 - 6 Years
 
Job Number: CJH-6387-1
Job Location: Fort Worth, TX
Rate: $120
Per Diem: Yes
Overtime: Possible
Duration: 12 Months
Start Date: Asap
Input Date: 08/30/2021
Last Updated: 09/08/2021
Firm Name: INDOTRONIX INTERNATIONAL CORPORATION
Attention: Venkat Manta
Address: 687 LEE RD STE 350
City, State: ROCHESTER, NY 14606
Phone: 845/473-1137
Website: www.iic.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer III

Description:
A Software Engineer III job in Englewood, CO is currently available through Belcan with one of our Aerospace/Space/Defense clients. You will work in an agile, collective environment. You will be using your skills and expertise to define, design, develop, test, certify and improve cutting-edge software products. To be considered for this role, you will need a Bachelor's of Science degree in Computer Science, Software Engineering or other related discipline and typically 6 or more years of relevant experience. This is a great contract opportunity with a growing company. The ability to obtain and maintain a Secret U.S. Security Clearance is required. NO SPONSORSHIP AVAILABLE

Software Engineer III Job duties:

* Define, design, develop, test, certify and improve cutting-edge software products. These cover a very wide range from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems.
* Perform coding, debugging, testing, and troubleshooting of systems and software throughout the development process.
* Technical duties involve the design and development of new software products throughout the product lifecycle.
* Understanding of industry standard software languages such as C, C#, C++, HTML, Java, Python, and Bash
* Experience with software tools for requirements tracking, code reviews, static analysis, library and artifact repository, and automated build
* Knowledge of software development methodologies such as Agile/Scrum, Waterfall, and Spiral
* Experienced with data structures

Qualifications:

* Bachelors of Science degree in Computer Science, Software Engineering or other related
discipline and typically 6 or more years of relevant experience
* Understanding of Computer Aided Engineering tools
* Practical knowledge of engineering principles and practices
* Experience working in multi-disciplinary teams
* The ability to obtain and maintain a Secret U.S. Security Clearance is required.
* NO SPONSORSHIP AVAILABLE

Pay Range: Up to $61.00/hr. DOE

If you are interested in this Software Engineer III job in Englewood, CO, please apply via the 'apply now' link provided. Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.

 
Job Number: 315934
Job Location: Englewood, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 09/03/2021
Last Updated: 10/13/2021
Firm Name: BELCAN TECHSERVICES
Attention: FrancisOsolnick
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Quality Assurance Engineer

Description:
A Software Quality Assurance Engineer job in Tucson, AZ is currently accepting applications. This is a direct-hire position with our key aerospace client. In this role, you will be responsible for all aspects of product assurance throughout the software development cycle. This includes evaluation, testing of software and implementation of rigorous testing procedures performed at company site or our subcontractors. These steps will serve to facilitate quality engineering development and integrated software reliability. This engineer will incorporate industry best practices in order to build and automate QA processes as needed. To be considered for this role, you will have a B.S. Degree along with 8+ years of software quality assurance experience. Human spaceflight or aerospace industry background is required.

Software Quality Assurance Engineer Job Responsibilities:
* Responsible for developing and executing end-to-end testing for key technology platforms and be accountable for test projects and provide leadership and technical expertise to QA team.
* Experienced in working with various QA tools and applicable frameworks to develop and execute overall software test strategy for product release.
* Effectively communicate with cross-functional teams, including development, product team, product support, subcontractors, and system engineers to deliver business solutions.
* Design and implement tools for automated testing of multiple applications and ensuring that the QA team adheres to principles, guidelines and best practices as defined.
* Monitor all QA activities at and our subcontractors, test results and leaked defects. Guide root cause analysis and identification of areas of improvement.
* Document, implement, monitor, and enforce all processes for testing per industry standards.
* Pair with technical and functional teams in order to maintain continuity of integration environments that support high productivity levels and emphasizes defect prevention techniques.
* Ensure the proper usage of available tools to gain the maximum benefit of the QA effort. This includes testing tools for functional, performance, automation, etc.

Software Quality Assurance Engineer Job Requirements:
* B.S. Degree in required. M.S. or Ph.D. is desired
* 8+ years of relevant software quality assurance experience
* Demonstrated capability in developing automated integration and qualification tests
* Experience implementing Continuous Integration (CI) pipelines
* Experience (5+ years) in Software Testing Automation
* Experience with NPR 7150.2 NASA Software Engineering Requirements, or DO-178 Software Certifications standards.
* Experience with the CMMI model for software development and CMMI appraisals strongly preferred
* Proven experience and full command of QA procedures and methods, and Agile / SDLC
* Able and willing to work independently. Very good communications and interpersonal skills. (verbal and written).
* Familiarity with software development lifecycle.
* Working knowledge of NASA and ISS standard practices and requirements including safety, fault tolerance, and other unique disciplines.

If you are interested in this Software Quality Assurance Engineer job in Tucson, AZ, please apply via the 'apply now' link provided.

Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.
 
Job Number: 314707
Job Location: Tucson, AZ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/05/2021
Last Updated: 09/27/2021
Firm Name: BELCAN TECHSERVICES
Attention: ScottWatkins
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software-In-The-Loop Simulation Engineer - WA State / Contract or Direct hire

Description:
Description:

As part of a hardworking team of diverse engineers, you will develop aerospace multidisciplinary models and simulations using platforms ranging from desktop computers, software-in-the-loop simulation, hardware-in-the-loop labs, to on-vehicle simulation.

You will share in the team's impact on all aspects of many programs through their entire lifecycle, from early conceptual design and configuration through flight operations and sustaining engineering.

We are looking for someone to apply their technical expertise, leadership skills, and commitment to quality to positively impact safe human spaceflight.

Mandatory:
•Minimum of BS degree in Mechanical Engineering, Electrical Engineering, Aerospace Engineering, Physics, Applied Mathematics, or Computer Science
•5+ years of demonstrated experience in development of air or space vehicle and/or physical systems modeling and simulation •Strong fundamentals in rigid body dynamics, fluid mechanics, and 1st principles physics-based mathematical models
•Familiar with MATLAB and Simulink for building low-level simulations
•Experienced with Model Based Development paradigms and system/parameter identification techniques
•Ability to earn trust, maintain positive and professional relationships, and contribute to a culture of inclusion
•Must be a U.S. citizen or national, U.S. permanent resident
 
Job Number: WA0089
Job Location: WA State
Input Date: 09/10/2021
Last Updated: 10/31/2022
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic Avellino
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Specialist Engineer, Analysis/Systems Engineering

Description:
Inconen is looking for a Specialist Engineer, Analysis/Systems Engineering for our client, a well-known Aerospace Company, in Huntsville, AL.

** Candidates must be U.S. Citizens without Dual Citizenship **
**Our client mandates that all employees and contractors must be fully vaccinated for COVID-19**
** Candidates must have an active Secret Clearance or have had an active Secret Clearance within the last two years. **
** This is a Hardware Systems role, NOT Software or Electrical systems **

Duties:
-60% - Develops hardware and software requirements for rocket propulsion systems. Responsible for derivation, allocation, and documentation of requirements in a requirements database. Responsible for the development and maintenance of system, subsystem, and component specifications. Coordinates requirements and related specification change management with IPT members. Defines and coordinates requirements verification plans with integrated product team members, plans and manages compliance assessment and certification.
-15% - Performs functional analysis in support of requirements development effort. Supports and/or coordinates system trade studies. Coordinates selection of optimized concept baselines through benefit/cost trades in support of definition of system architecture and objectives.
-15% - Coordinates project risk assessment and management and prepares and reports results on mitigation plans.
-10% - Communicates results in oral presentations and written communication.

Skills:
-Without appreciable direction and exercising considerable latitude in determining technical objectives and approaches to assignments, performs in a largely independent role for the Systems Engineering organization.

Typical responsibilities include:
-May plan, conduct, and provide technical Systems Engineering direction on projects or major phases of significant rocket propulsion project assignments, coordinating the efforts of technical support staff in the performance of assigned projects.
-Requires the use of advanced Systems Engineering techniques in management of requirements.
-May require knowledge of SysML, Camoe, Rhapsody, Jazz Team Server, Rationale Publishing Engine, and/or Quality Manager.
-Requires knowledge of DOORS.
-Must have the ability to assesses the feasibility and soundness of proposed verification methods of requirements.
-Requires excellent understanding of risk management principles
-Requires ability to lead efforts related to design reviews
-Represents the organization in meetings to resolve important questions and to plan and coordinate work.
-Develops solutions to complex problems which require the use of ingenuity and creativity.
-Work is reviewed at periodic intervals for desired results and achievement.
-Contacts include interacting with customer personnel on technical matters often requiring coordinated activity across organizational lines.

Education:
-Bachelor’s degree
 
Job Number: 16711
Job Location: Huntsville, AL
Rate: $65.00 - $75.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 12 Mos
Start Date: ASAP
Input Date: 10/26/2021
Last Updated: 01/27/2022
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Advanced ASIC/FPGA Engineer

Description:
A Sr. Advanced ASIC/FPGA Engineer job in Scottsdale, AZ is currently available through Belcan. In this role, you will be responsible for the definition, design, verification and documentation for ASIC (Application Specific Integrated Circuit) and/or FPGA (Field Programmable Gate Array) developments. To be considered for this role, you will have a Bachelor's degree in Electrical or Computer Engineering, or a related specialized area or field, plus a minimum of 8 years of relevant experience. A current active Department of Defense Secret security clearance is required at the time of hire.

Sr. Advanced ASIC/FPGA Engineer Job duties:

* Utilizing your exceptional communication skills to lead small teams to successful project completion.
* Responsible for the definition, design, verification and documentation for ASIC (Application Specific Integrated Circuit) and/or FPGA (Field Programmable Gate Array) developments.
* Determine the architecture, system simulation and detailed design approach.
* Evaluate process flow.
* Create test simulation plans and verify test results.

Qualifications:

* Significant understanding and experience with the utilization of ASIC/FPGA engineering concepts, principles, and theories.
* Ability to provide resolution to a diverse range of complex problems which require the use of ingenuity and creativity.
* Strong awareness of organization and customer business objectives and engineering's role in achieving them.
* Experience effectively leading teams, through proven leadership skills.

If you are interested in this Sr. Advanced ASIC/FPGA Engineer position in Scottsdale, AZ please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 315125
Job Location: Scottsdale, AZ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/10/2021
Last Updated: 02/01/2022
Firm Name: BELCAN TECHSERVICES
Attention: FrancisOsolnick
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Electrical Engineer – Capital Logic

Description:
A Sr. Electrical Engineer - Capital Logic job in Louisville, CO is currently available through Belcan. In this role, you will be responsible for researching, designing, developing, testing, certifying, deploying and improving cutting edge products and services. To be considered for this role, you will have a Bachelor's degree in Electrical Engineering or other related discipline and 10 or more years of relevant experience.

Sr. Electrical Engineer - Capital Logic Job duties:

* Demonstrated knowledge of engineering principles and practices.
* Experience with Computer Aided Engineering tools.
* Build and test prototype devices.
* Must demonstrate the ability to consume / import Siemens Mentor Graphics Capital data / intelligence into Siemens NX11 for the purposes of routing bundles.
* Must demonstrate the ability to route bundles in NX11 and implement cable management hardware and devices.

Qualifications:

* Must demonstrate the ability to export CAD derived cable lengths back into Mentor Graphics Capital Logic.
* Experience composing and analyzing Electrical Load Analysis (ELA), circuit modeling, simulation, and analysis.
* Experience in digital or analog circuit design and schematic capture.
* Working knowledge of ASME and Government standards.

Pay Range: Up to $70/hr DOE

If you are interested in this Sr. Electrical Engineer - Capital Logic position in Louisville, CO please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 314872
Job Location: Louisville, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/31/2021
Last Updated: 09/20/2021
Firm Name: BELCAN TECHSERVICES
Attention: ScottWatkins
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Facility Maintenance Technician

Description:
Belcan has a job with a service client for a Senior PLC/Maintenance Technician located in Riverside, CA This person will function as one of the Sr.Lead Technician's at the customer site for a long term maintenance contract.
Key responsibilities;
* Preventive and predictive maintenance, scheduled maintenance, corrective maintenance, scheduled repairs, emergency repairs, and performs complex maintenance on tools, test equipment, etc.
* Log all service work performed, downtime during repair, and account for equipment service requests of all inspections, maintenance and repair work, and failures; reviews maintenance logs and work orders of junior techs.
* Leads the complex maintenance tasks, equipment trial runs, investigative tests, repairs and overhauls. Must have the ability to connect a maintenance PC to a PLC and step through and understand the PLC program to troubleshoot complex controls failures, and make minor code changes under the direction of Engineering.
* Guides on-site technical and operational support in the design, development, installation and maintenance of equipment and systems of a very complex nature. Guides very complex site surveys to develop base or installation design plans. Guides training customers to maintain and adjust very complex equipment. Develops and submits reports covering all job activity. Guides the maintenance of very complex tools, test equipment, calibration items, etc. May develop the planning and estimating of labor categories, rates, material dollar costs, transportation expenses and per diem rates to complete very complex proposals. Guides the review of very complex task plans, drawings, and installation schematics and provides continual guidance throughout task duration.
* Mentors junior techs. Leads the resolution of complex equipment/system failures & faults and interfaces with customer personnel to provide quality service and feedback on problem evaluation and resolution.
* Performs assessment of complex product/equipment performance based on field support data and recommends modifications or improvements and service training to customers.

Qualifications;
* Associate degree required, BS/BA in related discipline preferred. Specialized skill training/certification may be required.
* Skills including a balance of Electronics, Electrical and Mechanical skills with an emphasis on Controls.
* Strong electrical mechanical background and ability to troubleshoot problems. Need to be able to perform maintenance functions and make repairs in a professional and workman like manner. Need to learn system operations in quick fashion. Needs to be willing to follow procedures and read prints, schematics. Must have an excellent safety record. Must have AB PLC and RS Logix experience. Must have Rockwell software experience. Must be able to utilize CMMS.
* Electromechanical skills, troubleshooting skills with PLC controls, servos, and other discrete electrical control components.
* Five years maintenance experience with some conveyor equipment and material handling experience is preferred.
* Demonstrates and applies comprehensive knowledge of field of specialization to the successful completion of complex assignments. Demonstrates advanced knowledge of concepts, practices, and procedures of particular area of specialization. Demonstrates significant knowledge of organizations business practices and issues faced and contributes to problem resolution of those issues. Generally, 5 years of successful experience in area

THERE IS A FIRST SHIFT & 3RD SHIFT POSITION
Hours that we will work when we are 24/7
1st 5:30am - 2:00pm
3rd 9:30pm - 6:00am

THIS IS A CONTRACT TO HIRE POSITION. AVERAGE PAY IS $30.00/HR. SALARY BASED ON EDUCATION, JOB KNOWLEDGE, AND EXPERIENCE. ROTATIONAL WEEKENDS.

If you are interested in this Senior Maintenance Technician job in Riverside, CA please apply via the 'apply now' link provided.

Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.


 
Job Number: 312596
Job Location: Riverside, CA
Rate: --
Per Diem: --
Overtime: --
Duration: JOB-CONTRACT_TYPE
Start Date: --
Input Date: 07/02/2021
Last Updated: 10/11/2021
Firm Name: BELCAN TECHSERVICES
Attention: ScottWatkins
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Maintenance Technician

Description:
A Maintenance Technician job with a service client is located in Denton, TX. This position will function as a Senior Technician on 1st shift working a 12 hour shift.

Responsibilities:
* Electromechanical skills, troubleshooting skills with PLC controls, servos, and other discrete electrical control components.
* Strong conveyor systems experience
* Provide electromechanical corrective repairs and preventative maintenance.
* Log all service work performed, downtime during repair, and account for equipment service requests.
* Leads the complex maintenance tasks, equipment trial runs, investigative tests, repairs and overhauls. Performs complex product and service training to customers.
* Performs complex maintenance on tools, test equipment, etc. Completes documents of all inspections, maintenance and repair work, and failures; reviews maintenance logs and work orders of junior techs. Mentors junior techs.
* Leads the resolution of complex equipment/system failures & faults and interfaces with customer personnel to provide quality service and feedback on problem evaluation and resolution.
* Performs assessment of complex product/equipment performance based on field support data and recommends modifications or improvements.
* May participate in the negotiation and administration of service contracts.

Requirements:
* HS diploma or equivalent required. Specialized skill training/certification may be required.
* Five years maintenance experience with electromechanical equipment experience is preferred
* Must have the ability to connect a maintenance PC to a PLC and step through and understand the PLC program to troubleshoot complex controls failures, and make minor code changes under the direction of Engineering.
* Practice safe work habits and abide by the safety rules in accordance with the safety policies set forth by our client.
* Work in cooperation as a team with the 3PL warehouse operators.
* Walk long distances and stand for long periods of time.

THIS IS A 6 MONTH CONTRACT TO HIRE POSITION

If you are interested in this Maintenance Technician job in Denton, TX, please apply via the 'apply now' link provided.

Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan Engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

 
Job Number: 314392
Job Location: Atlanta, GA
Rate: --
Per Diem: --
Overtime: --
Duration: JOB-CONTRACT_TYPE
Start Date: --
Input Date: 07/17/2021
Last Updated: 11/11/2021
Firm Name: BELCAN TECHSERVICES
Attention: Dee AnnVan Schaick
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Maintenance Technician

Description:
Belcan has a job for a Senior Maintenance Technician located in Ontario, CA. The Maintenance Technician level is responsible for the day-to-day troubleshooting and preventative/predictive maintenance. Acts as a senior material handling technician on all equipment that is installed at a specific site location. Helps and mentors lower-level employees.

Key Responsibilities:

- Electromechanical skills, including motors, Troubleshooting skills with PLC controls, servos, gearboxes, and other discrete electrical control components.
- Practice safe work habits and abide by the safety rules in accordance with the safety policies set forth by the client.
- Provide electromechanical corrective repairs and preventative maintenance.
- Log all service work performed, downtime during repair, and account for equipment service requests.
- Participates in complex maintenance tasks, equipment trial runs, investigative tests, troubleshoot equipment failures, repairs and overhauls.
- Participates in training customers on complex products, operations and services.
- Performs semi-complex maintenance on tools, test equipment, etc.
- Maintains documents of all inspections, maintenance and repair work, and failures.
- Participates in the assessment of complex product/equipment performance based on field support data and recommends modifications or improvements.
- Responds to and corrects semi-complex equipment faults.

Qualifications:

* HS diploma or equivalent required. Associate degree or vocational technical training preferred. Specialized skill training/certification preferred.
* 5+ years of Electrical troubleshooting skills to include wiring, ac power, ac motors, electrical drawings/schematics, and control panels.
* Two years of Automated Guided Vehicles (AGV) maintenance preferred with emphasis on electronics and computer skills
* Servo drives, PLC, PC controllers, dc power supplies, optical devices
* Knowledge of automated equipment; preferably automated material handling systems. Some experience with Allen-Bradley RSLogix5000 PLC controls platforms.
* Some experience with DeviceNet, PROFIBUS, Ethernet, or equivalent network communications is a plus.
* MS Office products



If you are interested in this Maintenance Technician position in Ontario, CA please apply via the 'apply now' link provided.


Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 315843
Job Location: Ontario, CA
Rate: --
Per Diem: --
Overtime: --
Duration: JOB-CONTRACT_TYPE
Start Date: --
Input Date: 09/03/2021
Last Updated: 11/23/2021
Firm Name: BELCAN TECHSERVICES
Attention: Dee AnnVan Schaick
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Mechanical Engineer

Description:
A Sr. Mechanical Engineer job in Louisville, CO is currently available through Belcan with one of our Aerospace clients. You'll conceptualize and deliver complex mechanical structures and systems and your technical duties include the design and development of new products and processes throughout the product lifecycle. To be considered for this role, you will need a Bachelors Degree in Mechanical Engineering or other related discipline and typically 10 or more years of relevant experience. This is a great opportunity with a growing company.
MUST BE A US CITIZEN.

Sr. Mechanical Engineer Job duties:

* Understanding of applying and interpreting Geometric Dimensioning and Tolerancing (GD&T) per ASME Y14.5
* Experience in Engineering Simulation such as Finite Element structural Analysis (FEA), Computational Fluid Dynamics (CFD), and Thermal Analysis
* Background in the Aerospace and Defense Industry
* Knowledge of industry-standard mechanical design principles, to include, but not limited to parametric design, model-based definition, material hardware selection, manufacturing, and production processes

Qualifications:

* Bachelor's of Science degree in Mechanical Engineering or related discipline and typically 10 or more years of relevant experience
* Practical knowledge of engineering principles and practices
* Experience with Computer Aided Engineering tools
* Familiarity working in multi-disciplinary design and development teams

Pay Rate: Up to $70/hr DOE

If you are interested in this Sr. Mechanical Engineer job in Louisville, CO , please apply via the 'apply now' link provided. Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.


 
Job Number: 312986
Job Location: Louisville, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 05/28/2021
Last Updated: 09/20/2021
Firm Name: BELCAN TECHSERVICES
Attention: FrancisOsolnick
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Metrologist

Description:
A Sr. Metrologist job in Brea, CA is currently available through Belcan. In this role, you will be responsible for providing expert knowledge in metrology solutions including but not limited to: laser tracker/PCMM inspections, machine alignments, reverse engineering, tool building and assembly, software and hardware training. To be considered for this role, you will have a High School Diploma or equivalent, plus a minimum of 8 years of relevant experience.

Sr. Metrologist Job duties:

* Generate inspection reports to customer specifications. This includes Drawing Based inspection reports, First Article Inspection Reports, Model Based Definition inspection reports, and Dimensional inspection reports.
* Maintain equipment by performing field calibrations and verifying manufacturers maximum performance errors.
* Maintain equipment's cleanliness using manufacturers specifications.
* Assists in recommending solutions for customers applications.
* Generating daily logs to be used for reference if asked by the customer.

Qualifications:

* Expert level experience using Laser Trackers (Leica, Faro and API), PCMM's (Romer and Faro arms), 3D Laser scanners and Total Stations.
* Expert level knowledge of Computer Aided Measuring software (Verisurf, Polyworks, Spatial Analyzer, Buildit etc.).
* Expert level knowledge in blueprint reading and GD&T.
* Solid knowledge of 3D CAD.
* Knowledge in aerospace tooling, composites manufacturing and assembly.

If you are interested in this Sr. Metrologist position in Brea, CA please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 316035
Job Location: Brea, CA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 09/09/2021
Last Updated: 12/09/2021
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. RF Engineer

Description:
Inconen is looking for a Sr. RF Engineer for our client, a well-known Aerospace Company, in Orlando, FL.

**Candidates must be a U.S. Citizen without Dual Citizenship**
**Relocation package if the candidate is more than 50 miles from our location**

Duties:
1. Our client, a well-known Aerospace Company, produces complex single, two, and three stage launch vehicles used to support ballistic missile defense testing.
2. This opening is for a RF Engineer who will be supporting multiple projects that include requirements definition, trade studies, component selection, design, analysis, and testing related to the technologies listed above.
3. The successful candidate will be well rounded in electrical and RF engineering, self-motivated, detail oriented and able to work both independently and within a team environment.

Essential Job Functions:
25 % - Uses fundamentals in electrical engineering both analog & digital electronics.
25 % - Applies RF principles and design technology in development of RF microwave assemblies and systems as it applies to telemetry.
10 % - Use of communication transmitters, receivers, power amplifiers, filters, combiners, antennas and flight instrumentation.
10 % - Designs & supports MIL-STD-461 testing.
10 % - Uses link analysis, inter-modular analysis and antenna pattern analysis.
10 % - Designs, develops, integrates and tests military electronic systems with design for manufacturing & environmental constraints such as (EMI, EMC, vibration, packaging thermal ect.)
10 % - Documents efforts, writes test procedures, reports to completion of milestones with specific procedures.

Skills:
1. Ability to use and apply RF principles and design techniques, with experience in development of RF/microwave assemblies and systems as it applies to telemetry.
2. Experience with communication transmitters, receivers, power amplifiers, filters, combiners, antennas and flight instrumentation.
3. Experience with link analysis, inter-modulation analysis, and antenna pattern analysis.
4. Experience with design, development, integration, and test of military electronic systems with design for manufacturing and environmental constraints (EMI/EMC, vibration, packaging, thermal, etc.).
5. Experience with MIL-STD-461E
6. Strong Understanding of electrical engineering fundamentals in both analog and digital electronics.
7. This is a hands-on position for individuals with demonstrated analytical and troubleshooting skills.
8. Ability to document efforts, write test procedures and reports and contribute to completion of milestones within specific projects.
9. Excellent written and verbal communication skills.
10. Experience with Microsoft Word, Excel, and PowerPoint.
11. May be required to obtain and maintain a U.S. Security Clearance at the appropriate level.
12. Must be able to satisfy federal government requirements for access to government information, and having dual citizenship may preclude you from being able to meet this requirement.

Education:
1. Bachelor's Degree in Engineering and at least 5 years of related experience or an equivalent combination of education and experience required.
 
Job Number: 12865
Job Location: Orlando, FL
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: Direct Hire
Start Date: ASAP
Input Date: 08/19/2021
Last Updated: 10/04/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. RF Integration & Test Technician

Description:
A Sr. RF Integration & Test Technician job in Scottsdale, AZ is currently available through Belcan. In this role, you will be responsible for executing advanced end to end SATCOM system testing with highly integrated satellite and ground systems simulators. To be considered for this role, you will have an Associate's Degree in a related discipline, plus a minimum of 5 years of relevant experience. Due to the nature of the work performed in this facility, US citizenship is required.

Sr. RF Integration & Test Technician Job duties:

* Execute advanced end to end SATCOM system testing with highly integrated satellite and ground system simulators.
* Coordination of concurrent system testing interactions in a fast moving dynamic laboratory environment.
* Readily telegraph any impact due to simulator testing on the entire ground system laboratory environment.
* Support laboratory integration meetings possessing the understanding of interactions with the entire ground system.
* Troubleshooting RF equipment and component issues involving typically upconverters, downconverters, mixers, LOs and timing references.

Qualifications:

* Fluency required in operating real-time spectrum analyzers, signal generators, vector signal generators, Arbitrary waveform generators, network analyzers, oscilloscopes, power meter measurement operations and calibration.
* Measurement proficiency in RF system insertion loss and power, RF delay, VSWR, WCDMA QPSK EVM, PCDE and Phase Noise measurement techniques.
* Specific fluency in Techtronic, Agilent and R&S test equipment.
* Familiarity with testing setup, troubleshooting and understanding the measurement results for RF concepts of phase noise, jitter, intermodulation.
* Expertise in generating test and characterization plans to validate hardware and software.

If you are interested in this Sr. RF Integration & Test Technician position in Scottsdale, AZ please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 316060
Job Location: Scottsdale, AZ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 09/10/2021
Last Updated: 10/04/2021
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Stress Engineer

Description:
General Summary:
Experienced senior/lead aerospace stress engineer with significant experience in the analysis, certification and testing of metallic and composite primary structure.

Duties and Responsibilities:
Serve as subject matter expert stress engineer responsible for metallic primary structure. Provide leadership and guidance to a group of contract and associate stress engineers working on certification, analysis and testing. Experience writing certification stress reports, working with FAA DER's and structural testing needed. Applicant must be competent in both classic hand analysis (Bruhn, Peery, Roark, ESDU) methods as well as FEA. Must also have the ability to explain and present analysis and assumptions in a rational manner.

Must be able to work in a dynamic and challenging environment where you will be expected to take ownership of assigned projects and see them through to completion.

Provide recommendations and status updates to management.

Education, Work Experience, Certification and/or Licensure:
BS required, MS preferred Aerospace or Mechanical Engineering
FAA DER is a major plus but not required. (14 CFR 23/25)

Knowledge, Skills and Abilities:
Experience with 3D solid modeling (CATIA v5, Unigraphics)
Experience with programming languages (Python, VB, Matlab)
Expert in Finite Element Analysis (NASTRAN, ABAQUS)
Proficient computer skills with MS Word, MS Excel, MS PowerPoint, MS Project

Physical Requirements:
1. Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
2. Incumbents may be required to stand, sit, squat, walk, bend, climb ladders, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
3. Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
4. Read, hear, speak, and see with no restrictions, as required by job duties.
5. Comprehend and adhere to management directions and/or safety instructions with no restrictions.
6. Effectively communicate in Business English language.
7. Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.
8. Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties.


The Structures Company LLC is an AA/EOE.
 
Job Number: 511
Job Location: Greensboro, NC
Rate: $50-$70/Hr. **DOE**
Per Diem: Yes
Overtime: Possible
Duration: Long Term
Start Date: ASAP
Input Date: 09/20/2021
Last Updated: 09/28/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Stress Engineer

Description:
General Summary:
Serves as subject matter expert to stress engineers in composite and metallic primary structure group.

Duties and Responsibilities:
1. Serves as subject matter expert stress engineer responsible for metallic primary structure.
2. Provides leadership and guidance to stress engineers working on certification, analysis and testing.
3. Works with FAA DER’s and structural testing.
4. Provides recommendations and status updates to management.

Education, Work Experience, Certification and/or Licensure:
1. Bachelor’s degree in Aerospace, Mechanical Engineering or related field required. MS preferred.
2. Minimum of 10 years of engineering experience.

Knowledge, Skills and Abilities:
1. Experience writing certification stress reports.
2. Competent classic hand analysis (Bruhn, Peery, Roark, ESDU) methods as well as FEA.
3. Ability to explain and present analysis and assumptions in a rational manner.
4. Knowledge with 3D solid modeling (CATIA v5, Unigraphics).
5. Exposure to FINITE Element Analysis (NASTRAN, ABAQUS).
6. Exposure to programming languages (Python, VB Matlab).

Physical Requirements:
1. Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
2. Incumbents may be required to stand, sit, squat, walk, bend, climb ladders, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
3. Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
4. Read, hear, speak, and see with no restrictions, as required by job duties.
5. Comprehend and adhere to management directions and/or safety instructions with no restrictions.
6. Effectively communicate in Business English language.
7. Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.
8. Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties.

LARGE GAPS IN WORK HISTORY WILL DISQUALIFY
 
Job Number: N/A
Job Location: Greensboro, NC
Rate: DOE
Per Diem: Relocation
Overtime: N/A
Duration: Permanent
Start Date: ASAP
Input Date: 09/15/2021
Last Updated: 09/28/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Garrett Smart
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Stress Engineer

Description:
General Summary:

Experienced senior/lead aerospace stress engineer with significant experience in the analysis, certification and testing of metallic and composite primary structure. 



Duties and Responsibilities:

Serve as subject matter expert stress engineer responsible for metallic primary structure.  Provide leadership and guidance to a group of contract and associate stress engineers working on certification, analysis and testing.  Experience writing certification stress reports, working with FAA DER's and structural testing needed.  Applicant must be competent in both classic hand analysis (Bruhn, Peery, Roark, ESDU) methods as well as FEA.  Must also have the ability to explain and present analysis and assumptions in a rational manner.



Must be able to work in a dynamic and challenging environment where you will be expected to take ownership of assigned projects and see them through to completion. 



Provide recommendations and status updates to management. 



Education, Work Experience, Certification and/or Licensure:

BS required, MS preferred Aerospace or Mechanical Engineering

FAA DER is a major plus but not required. (14 CFR 23/25)



Knowledge, Skills and Abilities:

Experience with 3D solid modeling (CATIA v5, Unigraphics)

Experience with programming languages (Python, VB, Matlab)

Expert in Finite Element Analysis (NASTRAN, ABAQUS)

Proficient computer skills with MS Word, MS Excel, MS PowerPoint, MS Project
 
Job Number: JPC - 1625
Job Location: Greensboro, NC
Rate: open (DOE)
Per Diem: Yes
Overtime: Yes
Duration: 6-12 months+
Start Date: ASAP
Input Date: 08/23/2021
Last Updated: 09/28/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Garrett Smart
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Systems Engineer

Description:
A Sr. Systems Engineer job in Louisville, CO is currently available through Belcan. In this role, you will be responsible for the evaluation of advanced concepts for emerging space markets and development of next generation architectures and technologies. To be considered for this role, you will have a Bachelors degree in Systems Engineering, or a related field, plus a minimum of 10 years of relevant experience. Due to the nature of the work performed in this facility, US citizenship is required.

Sr. Systems Engineer Job duties:

* Demonstrated knowledge of engineering principles and practices.
* Experience working in multi-disciplinary design and development teams.
* Thorough understanding of requirements management, functional requirements parsing, derivation, and allocation; systems design, systems integration, technical risk identification and management strategies, and Verification and Validation (V&V) principles.

Qualifications:

* Advanced Experience with requirements management and system modelling tools, such as DOORS, Rhapsody, NoMagic, MATLAB.
* Knowledge of industry standard mechanical design principles, to include, but not limited to requirements management, Model Based System Engineering (MBSE).
* Background in the Aerospace and Defense Industry.
* Experience leading baseline definition and maturation in a complex development setting, including the use of high impact trade studies and other measures.

Pay Range: Up to $70/hr DOE

If you are interested in this Advanced Systems Administration Specialist position in Bloomington, MN please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.


 
Job Number: 314130
Job Location: Louisville, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/10/2021
Last Updated: 10/05/2021
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Analysis Engineer

Description:
Seeking a first-rate aerospace Composite Stress Analysis Engineer with experience in vehicle stress analysis, repairs, and production manufacturing. The composite stress analyst will compile analysis, reports, models, and margins of safety into standardized formats for upload into TSC’s product lifecycle manager. Additionally, the analyst will support the design engineering staff with drawing release. The stress analyst is ultimately responsible for ensuring the vehicle structural design meets the customer mission requirements with positive margins of safety.

Your Mission

Responsibilities:
• Reviews, updates, and compiles engineering analytical definition of structural components and assemblies based on records from the prototype build project
• Develops standardized analysis criteria and templates
• Plays an integral role in the work flow release process for all structural designs
• Supports review of manufacturing plans and procedures to ensure compliance with design and loads requirements
• Supports the creation of structural test plans which will be used to verify manufacturing
• Oversees and coordinates other Stress Engineer work and act as a Commodity Stress Focal.
• Handles Pre-and-Post flight structural NRIs for Fuselage Structure, reviews other team members work on NRIs assigned to them.
• Handles Inspection inquiries, requiests, and new inspection from VGMX team.
• Defines primary structures inspections as needed for flight test and EIS.
• Compiling and implementing tools, methods and procedures learned and implement with team.

What You Bring
Basic Qualifications

• Bachelor’s degree from an accredited institution, with a concentration in a relevant Engineering discipline
• Minimum 10 years of applicable experience in the analysis of structural systems using strength of materials and finite element based methods.
• Minimum 5 years experience with strong understanding of composites analysis, manufacturing and sizing of composite structures.
• Minimum 5 years experience with strong understanding of FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures.
• Minimum 3 years supporting Structural Tests with knowledge and practical experience on FEM/Strain gage data correlation.
• Experience with free-body diagrams and classical stress analysis techniques.
• Excellent verbal and written communication skills
• Excellent organizational and problem-solving skills
• Excellent computer skills, including Outlook, Word, Excel and PowerPoint
• Applicants must be “U.S. persons” as defined by the ITAR (22 CFR §120.15)

Preferred Skills and Experience
• Hands-on experience with composites part fabrication and assembly processes.
• Proficiency in FEMAP a plus
• Pilot, aircraft homebuilding and rapid prototyping experience a strong plus
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
• Experience with manufacturing-based ERP systems, such as Oracle, is a plus

Physical and/or Additional Requirements

• None


The Structures Company is an AA/EOE.
 
Job Number: 499
Job Location: Mojave, CA
Rate: $75-$85/Hr. ***DOE***
Per Diem: Yes
Overtime: Yes
Duration: 8+ Months
Start Date: ASAP
Input Date: 09/17/2021
Last Updated: 09/28/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Analysis/Fatigue Analysis Engineer

Description:
Inconen is looking for a Stress Analysis/Fatigue Analysis Engineer for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
1. Must have stress analysis on primary aircraft structure.
2. Must have experience in fatigue analysis on primary aircraft structures.
3. Experience developing and substantiating aircraft structural repairs is a plus.
4. CATIA V5 experience is a must.

Education and Experience Requirements:
1. Bachelor's Degree required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Fiver (5) years in specific technical discipline or ten (10) years broad engineering experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to two (2) years for Masters, four (4) years for PhD in fields applicable to this job.

Position Purpose:
1. Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principle Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects.
2. Provides specialized technical assistance to team members.
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems.
4. Determines and develops own approach to solutions within schedule and cost objectives.
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives.
6. Acts as liaison with representatives outside of the assigned group/area.

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements.
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
3. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering related field preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 16852
Job Location: Savannah, GA
Rate: $70.00 - $80.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 09/08/2021
Last Updated: 11/08/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineer

Description:
Experienced aerospace stress engineer with background in the analysis, certification and testing of metallic primary structure.

Duties and Responsibilities:
• Serve as stress engineer responsible for metallic and composite primary structure.
• Experience required in writing certification stress reports and structural test plans.
• Applicant must be competent in both classic hand analysis (Bruhn, Peery, Roark, ESDU) methods as well as FEA.
• Experience with 14 CFR 23/25 regulations.
• Familiarity with structural design practices, load paths, and material properties
• Manages task execution to ensure on-time and on-target completion
• Excellent written and verbal communication skills.
• Must be able to work in a dynamic and challenging environment where you will be expected to take ownership of assigned projects and see them through to completion.

Education, Work Experience, Certification and/or Licensure:
• BS required, MS preferred Aerospace or Mechanical Engineering with a minimum of 5 years in stress engineering
• Minimum 10,000 hours using NASTRAN/PATRAN or FEMAP

Knowledge, Skills and Abilities:
• Experience with 3D solid modeling (CATIA v5, Unigraphics)
• Experience with programming languages (Python, VB, Matlab)
• Expert in Finite Element Analysis (NASTRAN, ABAQUS)

Physical Requirements:
• Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
• Incumbents may be required to stand, sit, squat, walk, bend, climb ladders, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
• Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
• Read, hear, speak, and see with no restrictions, as required by job duties.
• Comprehend and adhere to management directions and/or safety instructions with no restrictions.
• Effectively communicate in Business English language.
• Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.
• Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties.
• Serve as stress engineer responsible for metallic and composite primary structure.
• Experience required in writing certification stress reports and structural test plans.
• Applicant must be competent in both classic hand analysis (Bruhn, Peery, Roark, ESDU) methods as well as FEA.
• Experience with 14 CFR 23/25 regulations.
• Familiarity with structural design practices, load paths, and material properties
• Manages task execution to ensure on-time and on-target completion
• Excellent written and verbal communication skills.
• Must be able to work in a dynamic and challenging environment where you will be expected to take ownership of assigned projects and see them through to completion.
 
Job Number: 28-027
Job Location: Greensboro, NC
Rate: $45-$65.00/hr
Per Diem: Yes
Overtime: Possible
Duration: 1+ year
Start Date: ASAP
Input Date: 10/28/2021
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer 4

Description:
The candidate for this position will guide product design to incorporate new technology and verify structural integrity of various crewed and uncrewed aerial vehicles across commercial and military aircraft, rotorcraft, and spacecraft. Will employ efficient integration of both composite and metallic constructions. Solve complex structural problems by using analytical methods, finite element models/simulations and other analysis tools throughout the development lifecycle.

Requirements:
- BS in Aerospace / Mechanical Engineering or related discipline
- Minimum of 9 years’ experience in the stress analysis field, preferably aerospace or an equivalent combination of technical education and experience – PhD+4 years’ related work experience, MS+7 years’ related work experience
- Must be a US Citizen or Legal US Permanent Resident
- Strong English written, verbal, and electronic communication skills
- Proficiency with Microsoft Office 365 and Windows 10
- Strong experience in classical hand analysis for strength and stability of metallic and composite components
- Working knowledge of MIL-HDBK-516, or FAR Part 23, 25, 27 certification requirements
- Demonstrate proficiency in FEM idealization and good modeling practices using Femap, Nastran, ANSYS, Abacus or other FEA packages
- Experience with a 3D CAD package CATIA V5, Solidworks, Creo, NX/Unigraphics, Fusion 360, etc
- Ability to explain and present analysis and assumptions in a rational manner to customers, leadership, and teammates
- Work at our Manassas VA


Specific Responsibilities:
- Define and document process, certification, and test results to substantiate for customers and regulatory agencies that requirements are satisfied.
- Develop analytical processes/tools to improve effectiveness, quality and efficiency of the development effort.
- Work as an individual contributor under minimal direction.
- Write technical reports that are accurate, clear, and comprehensive with minimal review. Provide review and feedback to other analysts
- Lead small teams (3+) and give technical guidance during any stage/level of a program development
- Be proactive in teaching others, sharing experiences, and learning new skills
- Maintain good communication with customers, leadership, or teammates when onsite or remote
- Think ahead and ask questions. Making mistakes is acceptable if we understand and learn from them. Focus on fixing problems when they arise and not placing blame
Desired Skills:
- Experience with prototype development and testing of airframe primary structure
- Automate workflows for speed and efficiency using Microsoft Office 365, VBA, Python, Matlab, or Boeing custom tools
- Experience with fatigue and damage tolerance analysis, categorization of part criticality
- Experience in writing certification reports for Military or FAR Part 23/25/27
- Experience working with FAA or Military DERs
- Resource planning and task estimation for a complex effort supporting bid & proposal
- Able to support the resolution of complex aircraft structural challenges by applying various learned aerospace industry standard classical analysis techniques for both metallic and composite structures
- Cross-disciplinary interests are strongly desired; we love people that combine world-class expertise with a diverse background, hands on experience, and interesting hobbies




The Structures Company LLC is an AA/EOE.
 
Job Number: 525
Job Location: Manassas, VA
Rate: $75-$82/Hr. **DOE**
Per Diem: Yes
Duration: 6 Months
Start Date: 10/1/2021
Input Date: 07/22/2022
Last Updated: 01/26/2023
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Manufacturing Engineers

Description:
Manufacturing Engineer Positions – Mesa, AZ – St. Louis, MO – New Orleans, LA – Ridley Park, PA – North Charleston, SC. Must have 5+ yrs exp in assembly and installation, fabrication and electrical. Bachelor, Master or Doctor of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry is required.

Take your Career
to the Next Level
with the Help of Our Staffing Specialists!


 Nationwide Opportunities
 Competitive Compensation
 Great Benefits
 Referral Bonus

As an equal opportunity employer, ICONMA prides itself on creating an employment environment that supports and encourages the abilities of all persons regardless of race, color, gender, age, sexual orientation, citizenship, or disability.

Call for current openings
Multiple national openings for many engineering disciplines!

Andrew Kumar
Recruiter
(843) 955-9221
andrew.kumar@iconma.com
 
Job Location: AZ/MO/LA/PA/SC
Input Date: 01/02/2024
Firm Name: ICONMA LLC
Attention: Andrew Kumar
Address: 859 STEPHENSON HWY
City, State: TROY, MI 48083
Phone: 312/502-4795
800 Phone: 843/955-9221
Email: andrew.kumar@iconma.com
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analyst

Description:
A Structural Analyst job in Cincinnati, OH is currently available at Belcan. This job is a full-time direct position with benefits. To be considered for this role, you will need Bachelor's Degree in Aerospace Engineering or equivalent, and 2 years of experience in aerospace structural analysis. In this job your primary responsibility will be multiple structural finite element analysis projects for gas turbine, land vehicle, space vehicle, and other aerospace components. You will report to an FEA Group Leader as a key member of an integrated product team to design/develop, optimize, integrate, deliver, and transition engineering designs to production. Your office will be located in Cincinnati, OH.
Structural Finite Element Analyst job duties:
* Generate and maintain structural finite element models
* Perform reviews for the analysis plan, model, and results, internally and with the customer
* Ensure that models are systematically checked, updated, and validated
* Perform structural analysis, evaluate results, and prepare formal reports of the findings
* Perform classical hand calculations and use customer specific stress tools
* Liaise with heat transfer, fluids, design engineering, drafting, and other teams
* Maintain strong communication with the internal project management and with the client
* Be responsible for your project work and learn from lead and senior analysts
Minimum Qualifications:
* Bachelor's degree in Mechanical or Aerospace Engineering, or equivalent
* 2 years of structural analysis experience using ANSYS, or NASTRAN, or LSDYNA
* US Citizenship is required
* Ability to obtain and maintain a security clearance
Preferred Qualifications:
* Master's degree in Mechanical or Aerospace Engineering, or equivalent
* 3+ or more years in the aerospace industry
* Experience with analysis of composite structures
* 3+ years in aircraft structural finite element and hand calculation analysis
* Experience with non-linear large deflection structural finite element structural analysis
* Preference will be given to candidates with experience in the following:
o ANSYS, NASTRAN, HYPERMESH, FEMAP, LSDYNA, ABAQUS


gsvcf522
asvcf622 cin
 
Job Number: 315947
Job Location: Cincinnati, OH
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 09/04/2021
Last Updated: 02/08/2023
Firm Name: BELCAN TECHSERVICES
Attention: AnthonyDonofrio
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analyst

Description:
A Structural Analyst job with Belcan Engineering Group is currently available in Cincinnati, OH or Lexington, KY. This job is a full-time direct position. To be considered for this role, you will need Bachelor's Degree in Aerospace Engineering or equivalent, and 4 years of experience in airframe structural analysis. In this job your primary responsibility will be classical hand calculation and finite element analysis for aircraft and suborbital spacecraft. You will report to an Analysis Group Leader as a key member of an integrated product team.

Airframe Structural Analyst job duties:
* Perform structural analysis using Finite Element Analysis (FEA) as well as classical aircraft hand stress analysis methods
* Generate and maintain ownership of air and space vehicle structural finite element models
* Perform plan, model, and results reviews, internally and with the customer
* Ensure that calculations and models are systematically checked and validated
* Perform analysis, evaluate results, and prepare formal reports of the findings
* Liaise with heat transfer, fluids, design engineering, drafting, and other teams as required
* Maintain strong communication with the internal project management and with the client
* Oversee a team of junior analysts to achieve project success
Minimum Qualifications:
* Bachelor's degree in Mechanical or Aerospace Engineering, or equivalent
* 4 years of airframe or aerospace vehicle structural analysis
* 2 years of experience using FEMAP with NASTRAN
* 2 years of airframe stress hand calculation
* 2 years analysis of composite aircraft structures
* Proficiency in understanding technical drawings
* Must have excellent verbal and written communication skills
* US Citizenship is required
Preferred Qualifications:
* 5-6+ years of experience with airframe composites, FEMAP, NASTRAN, and hand calculations
* Experience using CATIA
* Experience with Fatigue and Durability And Damage Tolerance (DaDT) analysis
* Experience with MATLAB, PYTHON, MATCHCAD, NASGRO, and HYPERSIZER
* Previous experience working for an aircraft or launch vehicle OEM



 
Job Number: 315950
Job Location: Cincinnati, OH
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 09/04/2021
Last Updated: 10/19/2021
Firm Name: BELCAN TECHSERVICES
Attention: ColleenMinello
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Entry-Level Structural Analyst

Description:
A Structural Analyst job in Cincinnati, OH is currently available at Belcan. This job is a full-time direct position with benefits. To be considered for this role, you will need Bachelor's Degree in Aerospace Engineering or equivalent. In this job your primary responsibility will be structural finite element analysis for gas turbine, land vehicle, space vehicle, and other aerospace components. You will report to an FEA Group Leader as a key member of an integrated product team to design/develop, optimize, integrate, deliver, and transition engineering designs to production. Your office will be located in Cincinnati, OH.

Structural Finite Element Analyst job duties:
* Generate and maintain ownership of aerospace structural finite element models
* Perform plan, model, and results reviews, internally and with the customer
* Ensure that models are systematically checked and validated
* Perform analysis, evaluate results, and prepare formal reports of the findings
* Liaise with heat transfer, fluids, design engineering, drafting, and other teams
* Maintain strong communication with the internal project management and with the client
* Manage your own project work and learn from lead and senior analysts

Minimum Qualifications:
* Bachelor's degree in Mechanical or Aerospace Engineering, or equivalent
* Some experience using Ansys Classic or Ansys Workbench
* Proficiency in understanding technical drawings
* Due to the nature of our work US Citizenship is required
* Ability to obtain and maintain a security clearance

Preferred Qualifications:
* Master's degree in Mechanical or Aerospace Engineering, or equivalent
* Co-op experience in the aerospace industry
* Prior experience in any of the following is highly preferred: Nastran, Hypermesh/Optistruct, Patran, UGNX, Lsdyna, Femap


gsvcf522

 
Job Number: 315946
Job Location: Cincinnati, OH
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 09/04/2021
Last Updated: 02/08/2023
Firm Name: BELCAN TECHSERVICES
Attention: AnthonyDonofrio
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analyst

Description:
A Structural Analyst job with Belcan Engineering Group is currently available in Lexington KY, Cincinnati OH, or via remote support. This job is a full-time direct position. To be considered for this role, you will need Bachelor's Degree in Aerospace Engineering or equivalent, and 4 years of experience in airframe structural analysis. In this job your primary responsibility will be classical hand calculation and finite element analysis for aircraft and suborbital spacecraft. You will report to an Analysis Group Leader as a key member of an integrated product team.
Airframe Structural Analyst job duties:
* Perform structural analysis using Finite Element Analysis (FEA) as well as classical aircraft hand stress analysis methods
* Generate and maintain ownership of air and space vehicle structural finite element models
* Perform plan, model, and results reviews, internally and with the customer
* Ensure that calculations and models are systematically checked and validated
* Perform analysis, evaluate results, and prepare formal reports of the findings
* Liaise with heat transfer, fluids, design engineering, drafting, and other teams as required
* Maintain strong communication with the internal project management and with the client
* Oversee a team of junior analysts to achieve project success
Minimum Qualifications:
* Bachelor's degree in Mechanical or Aerospace Engineering, or equivalent
* 4 years of airframe or aerospace vehicle structural analysis
* 2 years of experience using FEMAP with NASTRAN
* 2 years of airframe stress hand calculation
* 2 years analysis of composite aircraft structures
* Proficiency in understanding technical drawings
* Must have excellent verbal and written communication skills
* US Citizenship is required
Preferred Qualifications:
* 5-6+ years of experience with airframe composites, FEMAP, NASTRAN, and hand calculations
* Experience using CATIA
* Experience with Fatigue and Durability And Damage Tolerance (DaDT) analysis
* Experience with MATLAB, PYTHON, MATCHCAD, NASGRO, and HYPERSIZER
* Previous experience working for an aircraft or launch vehicle OEM


 
Job Number: 315953
Job Location: Lexington, KY
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 09/04/2021
Last Updated: 10/19/2021
Firm Name: BELCAN TECHSERVICES
Attention: AnthonyDonofrio
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer

Description:
Structural Design Engineer:  Who You Are

Seeking a design engineer with experience developing aircraft modifications or in-service sustainment activities. This role executes work under the supervision of the Design Lead or Manager. Engineers in this position are expected to have strong experience with aerospace standard design practices and methods as well as engineering experience in design and analysis required to develop efficient solutions. 

Structural Design Engineer:  Your Mission

Development of conceptual designs through manufacturing of details, assemblies and installations.
Support operations team to ensure vehicle readiness for flight.  This includes onsite support during implementation of solutions. 
Generate Engineering definition in accordance with the industry and company standards.
Support review of manufacturing plans and procedures to ensure compliance with design requirements.
Manage time effectively to meet the demands of internal customer requirements.
Develop technical solutions to complex problems that require the regular use of ingenuity and creativity.
Structural Design Engineer: What You Bring

Bachelor’s degree from an accredited institution, with a concentration in Aeronautical, Astronautical, Aerospace, or Mechanical Engineering.
4-8+ years of experience in aerospace industry with a strong design emphasis.
In depth knowledge of structural design associated with composite aircraft and associated CAD workbenches.  CATIA V5 preferred.
Experience in aircraft sustainment programs or material review board desired.
Experience with composite tooling, fabrication, and manufacturing methods.
Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired.
Experience with Product Lifecycle Management tools (PLM software), requirements management tools and configuration management.
Excellent verbal and written communication skills.
Strong team player and ability to work independently with excellent organizational and problem-solving skills.


ITAR Requirements


To conform to U.S. Government space technology export regulations, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by ITAR (22 CFR §120.15) or eligible to obtain the required authorizations from the U.S. Department of State.
 
Job Number: JPC - 1222
Job Location: Mojave, CA
Rate: DOE
Per Diem: Yes
Overtime: Yes
Duration: 6 Months +
Start Date: ASAP
Input Date: 12/10/2021
Last Updated: 01/12/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Garrett Smart
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer - ***REMOTE CONTRACT POSITION***

Description:
Highly Desirable Qualifications:

• Experience with engineering and/or manufacturing development of structural parts and assemblies utilizing composite materials.
• Experience with the composite part design process, including composites stacking sequence, lamination theory, honeycomb core, bonded assemblies, manufacturing and fabrication processes and post-cure machining operations.
• Knowledge of GD&T per ASME Y14.5 along with tolerance analysis capabilities.
• Knowledge of ASME Y14.41 methods for Model Based Definition using CATIA V5 FTA (Functional Tolerancing and Annotations) is desired.
• Experience with CATIA V5 CPD (Composite Part Design) and/or FiberSIM is a plus.
• Ability to create and maintain parametric product geometry models is desired.
• Experience with Smarteam product data management is desired.


Specific Responsibilities:
• Work under close supervision of a senior designer.
• Produce airframe structural configuration layouts and detail designs including preliminary sizing, joint layouts, interface boundary definitions of parts and assemblies employing metallic and composite materials.  
• Create and maintain CAD solid models and drawings of installations, assembly and detail components that meet all requirements such as structural integrity, interface boundaries, weight and cost targets as directed by the project engineer.
• Coordinate with members of stress, manufacturing, procurement, quality control and other departments as required to mature the design from conception to production.  
• Create documentation to support design decisions and to identify and resolve potential issues.
• Participate in periodic design reviews to ensure designs meet the requirements.
• Prepare detail design packages for review, check and release.


Minimum Requirements (education and experience):
• Must be a US Citizen, Green Card Holder or Permanent Resident
• BS degree in Mechanical or Aerospace engineering from an accredited university

***Hours per Week: 40 a week – some OT required (8 hours per week)***

The Structures Company LLC is an AA/EOE.
 
Job Number: 514
Job Location: Greensboro, NC
Rate: $70-$80/Hr. **DOE**
Per Diem: No
Overtime: Yes
Duration: 6 Months
Start Date: 10/1/2021
Input Date: 09/15/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Designer

Description:
Immediate Openings in Fort Worth!
8 month Contract - onsite

What will you get to do in this role?
Design of structural detail parts, assemblies and installations, as well as, systems installations. Engineer shall be responsible for:
(1) development of layouts, preparation of engineering drawings, planning, scheduling, and coordination of activities of assigned subordinate engineers,
(2) preparation of work statements, quotes and EDAs to support customer requirements, product improvements and cost reductions, and
(3) support of manufacturing operations and customers in resolving technical problems related to the aircraft structure and systems.

Candidate must be able to coordinate efforts with little or no supervision across a wide range of functional organizations, such as Planning, Tooling, Stress, M&P, R&M, Materiel, Flight Sciences, Test, Manufacturing, and other Design IPTs to ensure that designs meet customer and derived requirements.
Some travel and overtime may be required.

What experience do you need?
Candidate must have aerospace design experience with knowledge of configuration management techniques, drafting/drawing conventions, and aerospace specifications and procedures.
CATIA V5 experience is required
PDM experience is required
 
Job Number: 0587
Job Location: Fort Worth, TX
Rate: up to $66.00/hr
Overtime: Possible
Duration: 8 Months
Start Date: ASAP
Input Date: 09/10/2021
Firm Name: INC EMPIRE LLC
Attention: Cynthia Lashley
Address: 111 W FRANKLIN ST
City, State: DELPHI, IN 46923
Phone: 765/426-1702
Website: www.incempirellc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Engineer

Description:
A Structural Engineer job in Fremont, CA is currently available through Belcan. In this role, you will be responsible for supporting the design and construction of a variety of new projects and renovations to existing industrial, manufacturing, and office facilities. To be considered for this role, you will have a Bachelor's degree in Civil/Structural Engineering plus a minimum of 7 years of experience in structural design of commercial, industrial, or oil & gas industries.

Structural Engineer Job duties:

* Coordinate structural design on multidiscipline project teams including Mechanical, Electrical, Piping/Plumbing (MEP) professionals.
* Conduct structural analysis and design of concrete and steel structures, along with the creation of justifying structural calculations.
* Make technical assumptions, think independently to complete assigned work, and draw conclusions based on engineering judgement.
* Present 30% 60% 90% design reviews to stakeholders and multi-discipline teams.
* Manage structural projects from estimating through construction.

Qualifications:

* Registered and in good standing as a Professional Engineer (PE) with active NCEES record and ability to acquire PE license in CA.
* Familiarity with Revit Structural and experienced with Navisworks.
* Detail-oriented and technical, yet experienced enough to see the big picture.
* Willingness to work overtime to meet deadlines.

If you are interested in this Structural Engineer position in Fremont, CA please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 308784
Job Location: Fremont, CA
Rate: --
Overtime: Possible
Duration: JOB-CONTRACT_TYPE
Start Date: --
Input Date: 02/07/2021
Last Updated: 02/02/2022
Firm Name: BELCAN TECHSERVICES
Attention: TaraHunt
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Engineer

Description:
A Structural Engineer job in Fremont, CA is currently available through Belcan. In this role, you will be responsible for supporting the design and construction of a variety of new projects and renovations to existing industrial, manufacturing, and office facilities. To be considered for this role, you will have a Bachelor's degree in Civil/Structural Engineering plus a minimum of 7 years of experience in structural design of commercial, industrial, or oil & gas industries.

Structural Engineer Job duties:

* Coordinate structural design on multidiscipline project teams including Mechanical, Electrical, Piping/Plumbing (MEP) professionals.
* Conduct structural analysis and design of concrete and steel structures, along with the creation of justifying structural calculations.
* Make technical assumptions, think independently to complete assigned work, and draw conclusions based on engineering judgement.
* Present 30% 60% 90% design reviews to stakeholders and multi-discipline teams.
* Manage structural projects from estimating through construction.

Qualifications:

* Registered and in good standing as a Professional Engineer (PE) with active NCEES record and ability to acquire PE license in CA.
* Familiarity with Revit Structural and experienced with Navisworks.
* Detail-oriented and technical, yet experienced enough to see the big picture.
* Willingness to work overtime to meet deadlines.

If you are interested in this Structural Engineer position in Fremont, CA please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 308784
Job Location: Fremont, CA
Rate: --
Per Diem: --
Overtime: --
Duration: JOB-CONTRACT_TYPE
Start Date: --
Input Date: 01/23/2021
Last Updated: 02/02/2022
Firm Name: BELCAN TECHSERVICES
Attention: TaraHunt
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Technician III

Description:
A Structural Technician III job in Louisville, CO is currently available through Belcan. In this role, you will be responsible for performing a variety of operations procedures to assemble and/or create major assembly structures and minor part-fitting operations. To be considered for this role, you will have a High School Diploma or GED and typically 5 or more years of relevant experience.

Structural Technician III Job duties:

* Translate blueprints into fabrications of structural assemblies to include basic layout, precision drilling, countersinking and the use of calibrated tools.
* Align parts on jigs and aerospace vehicles using templates and fixtures.
* Perform part-fitting operations such as filing, sawing, burring, trimming, framing, riveting, drilling and reaming and measure parts with micrometers and calipers to verify dimensions.
* Responsible for modifying incomplete and complete assemblies and incorporating the changes into the structure.
* Monitor and verify quality in accordance with statistical process or other control procedures.

Qualifications:

* High school diploma or GED equivalent and typically 5 or more years of relevant experience.
* Ability to understand and interpret applicable technical schematics, diagrams, blueprints, manuals and/or publications; ability to complete installations per technical drawings while maintaining edge distance and pitch.
* Progressive experience with structure assembly, minor part fitting techniques and repair and refinishing such as airframe corrosion removal, as applicable.
* Ability to install various fasteners such as rivets and hi-locks.

Pay range: Up to $34/hr DOE

If you are interested in this Structural Technician III position in Louisville, CO please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 315287
Job Location: Louisville, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/13/2021
Last Updated: 10/13/2021
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structures MRB Engineer

Description:
Inconen is looking for a Structures MRB Engineer for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
- Bachelor’s degree in Aerospace or Mechanical Engineering required.
- Minimum 10 years dedicated Structures MRB Engineering experience at a recognized Aerospace Manufacturer. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.
- Experience should include creation and justification of engineering dispositions for nonconformances of composite and metallic, pressurized and non-pressurized aircraft structures.
- Experience should include all components of the aircraft (Wing, Fuselage, Empennage).
- Experience should be in a Production and/or schedule-driven environment.
- Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
- Strong written/verbal communication and interpersonal skills.
- Must be computer literate (such as, but not limited to: Catia V5, Solumina, SmarTeam, Word, Excel)
- 1st Shift Position Typically 4X10 work schedule. Occasional overtime possible.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 16681
Job Location: Savannah, GA
Rate: $68.00 - $72.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 08/12/2021
Last Updated: 11/23/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structures MRB Engineer

Description:
Inconen is looking for a Structures MRB Engineer for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
- Bachelor’s degree in Aerospace or Mechanical Engineering.
- Minimum 10 years dedicated Structures MRB Engineering experience at a recognized Aerospace Manufacturer. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD.
- Experience should include creation and justification of engineering dispositions for nonconformances of composite and metallic, pressurized and non-pressurized aircraft structures.
- Experience should include all components of the aircraft (Wing, Fuselage, Empennage).
- Experience should be in a Production and/or schedule-driven environment.
- Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
- Strong written/verbal communication and interpersonal skills.
- Must be computer literate (such as, but not limited to: Catia V5, Solumina, SmarTeam, Word, Excel).
- Mon- Thurs position. Typically, 4X10 work schedule. Occasional overtime possible.

Education and Experience Requirements:
-Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
-10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors.
-Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 16713
Job Location: Savannah, GA
Rate: $70.00 - $78.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 01/26/2022
Last Updated: 03/07/2022
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structures MRB Engineer

Description:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

Unique Skills:
• Bachelors degree in Aerospace or Mechanical Engineering.
• Minimum 10 years dedicated Structures MRB Engineering experience at a recognized Aerospace Manufacturer. Experience credit considered for related adv degrees limited to 2 yes for Masters and 4 yrs for PhD.
• Experience should include creation and justification of engineering dispositions for nonconformances of composite and metallic, pressurized and non-pressurized aircraft structures.
• Experience should include all components of the aircraft (Wing, Fuselage, Empennage).
• Experience should be in a Production and/or schedule-driven environment.
• Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
• Strong written/verbal communication and interpersonal skills.
• Must be computer literate (such as, but not limited to: Catia V5, Solumina, SmarTeam, Word, Excel)
• Mon- Thurs position. Typically 4X10 work schedule. Occasional overtime possible.

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Essential Functions:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements:
• Advanced degree in engineering, or related curriculum preferred
• The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 24-590
Job Location: Savannah, GA
Rate: $58-$63/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 08/12/2021
Last Updated: 09/27/2021
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon Ferguson
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structures MRB Engineer

Description:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Unique Skills:
• Bachelors degree in Aerospace or Mechanical Engineering required.
• Minimum 10 years dedicated Structures MRB Engineering experience at a recognized Aerospace Manufacturer. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
• Experience should include creation and justification of engineering dispositions for nonconformances of composite and metallic, pressurized and non-pressurized aircraft structures. -
• Experience should include all components of the aircraft (Wing, Fuselage, Empennage).
• Experience should be in a Production and/or schedule-driven environment.
• Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
• Strong written/verbal communication and interpersonal skills.
• Must be computer literate (such as, but not limited to: Catia V5, Solumina, SmarTeam, Word, Excel) - 1st Shift Position Typically 4X10 work schedule. Occasional overtime possible.

Essential Functions:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements:
• Advanced degree in engineering, or related curriculum preferred
• The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 24-569
Job Location: Savannah, GA
Rate: $68-$72/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 08/04/2021
Last Updated: 09/27/2021
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon Ferguson
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structures MRB Engineer - Special Missions

Description:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Unique Skills:
• Bachelors degree in Aerospace or Mechanical Engineering.
• Minimum 10 years dedicated Structures MRB Engineering experience at a recognized Aerospace
• Manufacturer. Experience credit considered for related adv degrees limited to 2 yes for Masters and 4 yrs for PhD.
• Experience should include creation and justification of engineering dispositions for nonconformances of composite and metallic, pressurized and non-pressurized aircraft structures. GV/G550 experience a plus.
• Experience should include all components of the aircraft (Wing, Fuselage, Empennage).
• Experience should be in a Production and/or schedule-driven environment. Supporting structural a/c modifications a plus.
• Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
• Strong written/verbal communication and interpersonal skills.
• Must be computer literate (such as, but not limited to: Catia V5, Solumina, SmarTeam, Corridor, Word, Excel).
• Mon- Thurs position. Typically 4X10 work schedule. Occasional overtime possible.

Essential Functions:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
• Perform other duties as assigned.

Other Requirements:
• Advanced degree in engineering, or related curriculum preferred
• The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 24-601
Job Location: Brunswick, GA
Rate: $65-$75/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 08/31/2021
Last Updated: 09/27/2021
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon Ferguson
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structures MRB Engineer - Special Missions (Weekend Day Shift)

Description:
Inconen is looking for a Structures MRB Engineer - Special Missions (Weekend Day Shift) for our client, a well-known Aerospace Company, in Savannah, GA.

** Candidates must be a U.S. Citizen or Permanent Resident **

Unique Skills:
- Bachelor’s degree in Aerospace or Mechanical Engineering.
- Minimum 10 years dedicated Structures MRB Engineering experience at a recognized Aerospace Manufacturer.
- Experience should include creation and justification of engineering dispositions for nonconformances of composite and metallic, pressurized and non-pressurized aircraft structures.
- Gulfstream GV/G550 experience a plus.
- Experience should include all components of the aircraft (Wing, Fuselage, Empennage).
- Experience should be in a Production and/or schedule-driven environment.
- Supporting structural a/c modifications a plus.
- Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
- Strong written/verbal communication and interpersonal skills.
- Must be computer literate (such as, but not limited to: Catia V5, Solumina, SmarTeam, Corridor, Word, Excel)
- Weekend Shift position. Typically, 4X10 work schedule. Occasional overtime possible.

Education and Experience Requirements:
1. Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Ten (10) years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

Position Purpose:
1. Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Principle Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercise’s latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
2. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2.The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 15162
Job Location: Savannah, GA
Rate: $66.67 - $71.43/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 04/19/2021
Last Updated: 10/21/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structures MRB Engineer - Special Missions (Weekend Day Shift)

Description:
Inconen is looking for a Structures MRB Engineer - Special Missions (Weekend Day Shift) for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Unique Skills:
- Bachelor’s degree in Aerospace or Mechanical Engineering.
- Minimum 10 years dedicated Structures MRB Engineering experience at a recognized Aerospace Manufacturer.
- Experience should include creation and justification of engineering dispositions for nonconformances of composite and metallic, pressurized and non-pressurized aircraft structures.
- Experience should include all components of the aircraft (Wing, Fuselage, Empennage).
- Experience should be in a Production and/or schedule-driven environment.
- Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
- Strong written/verbal communication and interpersonal skills.
- Must be computer literate (such as, but not limited to: Catia V5, Solumina, SmarTeam, Word, Excel)
- Weekend 1st shift. Typically, 4X10 work schedule. Occasional overtime possible.

Education and Experience Requirements:
-Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
-10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors.
-Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

Position Purpose:
-Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 16799
Job Location: Brunswick, GA
Rate: $65.00 - $75.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 08/31/2021
Last Updated: 12/09/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structures Systems Designer

Description:
Inconen is looking for a Structures Systems Designer for our client, a well-known Aerospace Company, in Savannah, GA.

**Candidates must be a U.S. Citizen or Permanent Resident**

Qualified candidates will have:
- Thorough understanding of structures and mech system design criteria including design loads and durability (fatigue and corrosion)
- Solid understanding of design and manufacturing processes involved for both metallic and composite parts with a focus on design for manufacturing and assembly (DFMA)
- Solid understanding of 3D Model Based Definition (3D MBD), and the application of Geometric Dimensioning and Tolerancing (GD&T) for details and assemblies

Preferred candidates will also have:
- Proficiency in CATIA v5 workbenches: part design (machined parts), sheet metal, Composite Part Design (CPD), FT&A, Kinematics, Knowledge Based Engineering (KBE) tools including use of parameters, design tables, and Visual Basic macros
- Proficiency in SmarTeam PLM database
- Prior work experience with Gulfstream aircraft design

Responsibilities include:
- Maintain type design definition of the aircraft by producing the form, fit, and function documentation
- Engage various engineering, manufacturing and product support teams to complete designs
- Participate in design reviews
- Prepare engineering reports and presentations
- Mentoring to junior engineers when required

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 15576
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 08/10/2021
Last Updated: 11/29/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Subcontracts Management Specialist II

Description:
A Subcontracts Management Specialist II job in Broomfield, CO is currently available through Belcan. In this role, you will be responsible for developing subcontract specifications, work statements, and terms and conditions for the procurement of specialized materials, equipment and services for subcontract systems to guide the development, production, and global sustainment for multiple contract types. To be considered for this role, you will have a Bachelors degree in a related discipline and typically 3 years or relevant experience.

Subcontracts Management Specialist II Job duties:

* Develop subcontract specifications, work statements, and terms and conditions for the procurement of specialized materials, equipment, and services for our subcontract systems to guide the development, production, and global sustainment for multiple contract types.
* Responsible for preparing our bid packages, developing evaluation criteria, analyzing and evaluating our proposals, negotiating subcontract provisions, selecting or recommending new subcontractors, and administering our subcontracts.
* Administer standard subcontracts agreements, such as Firm Fixed Price (FFP) and Time and Material (T&M), through the entire contract lifecycle.
* Lead minor to moderate negotiations of terms, price, and schedule, and will monitor subcontractor performance.


Qualifications:

* Bachelors Degree in a related field and typically 3 or more years of relevant experience.
* Working knowledge of FAR/DFARS compliance.
* Advanced Microsoft Excel skills.
* ISM Certification preferred.

Pay Range: Up to $40.22/hr DOE

If you are interested in this Subcontracts Management Specialist II position in Broomfield, CO please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 314556
Job Location: Broomfield, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/23/2021
Last Updated: 11/18/2021
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Supplier Quality Engineer

Description:
A Supplier Quality Engineer job in Bloomington, MN is currently available through Belcan. In this role, you will be responsible for designing, implementing, and maintaining quality assurance protocols and methods for processing materials into partially finished or finished products. To be considered for this role, you will have a Bachelor's degree in Engineering, or a related Science or Mathematics field, plus a minimum of 5 years of relevant experience. Due the nature of the work performed in this facility, US citizenship is required.

Supplier Quality Engineer Job duties:

* Designs methods and procedures for inspecting, testing, and evaluating the precision and accuracy of production processes, production equipment and finished products.
* Performs analysis of reports and production data to identify trends and recommend updates or changes to quality standards and procedures when necessary.
* Interfaces and coordinates with suppliers to assure Quality, address nonconformances, and coordinate deviations.
* Develops Incoming Inspection instructions; Coordinates with Incoming Inspectors to evaluate and confirm and manage nonconformances.
* Provides subject matter expertise for relevant inspection/verification equipment; Provides technical guidance and assistance for Incoming Inspection team.

Qualifications:

* Ability to clearly recognize and report on relevant and sound quality engineering and manufacturing practices.
* Considerable written and verbal communications skills, including communicating issues, impacts, and corrective actions.
* Considerable knowledge of interpretation of drawings.
* Skilled in reviewing documents/drawings/instructions for conformance to requirements techniques.
* Knowledge of use of relevant inspection/measurement tools and techniques.

If you are interested in this Supplier Quality Engineer position in Bloomington, MN please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 316099
Job Location: Bloomington, MN
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 09/10/2021
Last Updated: 11/11/2021
Firm Name: BELCAN TECHSERVICES
Attention: Dee AnnVan Schaick
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Supplier Quality Specialist Levels 1-3

Description:
Job Description:

Plans and conducts audits and assessments of supplier's systems, processes and products. Documents and reports audit and assessment results. Inspects or verifies products for compliance with requirements. Assists with assessments of supplier capability and capacity to perform current or potential future work. Provides supplier education and coaching on quality systems, regulatory compliance issues and company initiatives. Resolves routine issues and concerns.

Additionally, quality assurance aerospace experience required in hardware inspection. Ability to read and understand blueprints drawings. Medium to advance Data base systems and excel experience. This is a virtual assignment, traveling domestically to suppliers' facilities within SC State, particularly in the Charleston area. On-call assignment with approximately between 20-25 hours weekly. Hours will vary week to week and are typically 32 or less. Candidates must reside within an 40 mile radius from Charleston, SC in order to timely support the assignment.

Preferred Experience:
- Working with suppliers
- Inspection, including first article inspection
- Root cause corrective analysis

Qualifications:
Teamwork, Systems thinking, Strategic decision making, Enabling technology/Innovation & Invention, Continuous learning, Accountability and responsibility, Continuous improvement, adaptability, Change management, Planning and organizing, Analysis and Corrective action, Industry/Gov standards, Engineering technical info, Configuration/Data Mgmt, Influencing others, Detailed supplier knowledge, quality systems process, Procurement Processes, Boeing knowledge, Assembly Process, Analytical skills

Additional Comments:
-100% Remote
-On Call
-Part Time
-Traveling in Charleston, SC and vicinity
 
Job Number: JPC - 1724
Job Location: Charleston, SC
Rate: $40.00/hr
Per Diem: Yes
Overtime: Possible
Duration: 12 Months
Start Date: ASAP
Input Date: 09/15/2021
Last Updated: 09/30/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Jorge Garcia
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
System Engineer - Aircraft Surveillance Development and Verification

Description:
ABOUT THE JOB:
This position is responsible for system development and verification activities for aircraft surveillance systems in accordance with ARP4754A systems development cycle and DO-178B software development cycle.

Surveillance systems include Traffic Alert & Collision Avoidance Systems (TCAS), Terrain Awareness Warning Systems (TAWS) and Mode S Transponders with Automatic Dependent Surveillance-Broadcast (ADS-B) Out.

REQUIRED SKILLS:
• Bachelor’s degree in Computer Science or Electrical/Computer/Aerospace Engineering
• 5+ years Aerospace Engineering experience
• Knowledge of ARP4754A systems development cycle
• Familiarity with DO-178B software development cycle
• Experience with requirements development, capture and management
• Experience developing system level verification tests for a VALFAC (validation facility) environment including:
o Authoring new test scripts
o Updating test scripts
o Running tests
• Experience with DOORS for test case capture and management and for requirements capture and management
• Effective Communication Skills (both verbal and written)
• Self-motivated, Accountable, Detail-oriented

PREFERRED SKILLS:
• TCAS product experience
• TAWS product experience
• ADS-B Out product experience

Apply to this job or any of our other openings at https://realtime.catsone.com/careers/

ABOUT THE COMPANY:
Real Time Consulting (RTC) exists to partner outstanding engineering talent to support our clients’ success. Unsurpassed service is delivered to our clients by upholding responsibility, teamwork and quality. Our primary commitment is to help our clients. Since 1997, RTC has been protecting and enhancing lives with safe, reliable, innovative solutions, providing full life-cycle design, development and testing of EMBEDDED ENGINEERING SYSTEMS and SOFTWARE SOLUTIONS with Program Management and Consulting Services. Our employees average 20+ years of versatile and accomplished expertise to our clients, driving continuous innovation forward. Employee’s innovative and analytical ideas are cultivated while maintaining the big picture vision in a fast-paced, changing environment. Our corporate values are to Uphold Responsibility, Support People, Promote Teamwork and Deliver Quality!

This position may require exposure to software, source code or technology that is subject to US export control laws and regulations (i.e., International Traffic in Arms Regulations or the Export Administration Regulations). To comply with these requirements, you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Departments of State or Commerce, as applicable.

RTCo is an Equal Opportunity Employer; employment with RTCo is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

To qualify for all positions with Real Time Companies, applicants must be legally authorized to work in the United States and should not require now, or in the future, sponsorship for employment visa status. Please be aware that Real Time Companies does not sponsor employment-based visas. Additionally, certain positions with Real Time Companies that involve work with government entities may have more restrictive employment status requirements, such as U.S. citizenship, based on security clearance requirements or other governmental requirements. Real Time Companies is an Equal Opportunity Employer M/F/D/V.
 
Job Location: Phoenix, AZ
Rate: Open
Per Diem: No
Overtime: Straight Time
Duration: 6 mo +
Start Date: ASAP
Input Date: 09/27/2021
Firm Name: REAL TIME CONSULTING
Attention: Kathy Heath
Address: 20601 N 19TH AVE STE 110
City, State: PHOENIX, AZ 85027
Phone: 623/792-8946
Website: www.real-time-consulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
System Engineer - IMA Platform

Description:
ABOUT THE JOB:
This position is responsible for development and test of an integrated modular avionics (IMA) platform.

REQUIRED SKILLS:
* Bachelor’s degree in Computer Science or Electrical/Computer/Aerospace Engineering
* 7+ years aerospace system engineering experience
* System design experience using ARP4754A guidelines
* Experience with Integrated Modular Avionics (IMA)
* Experience with system verification testing
* Experience updating system requirement from problem reports
* Experience with coverage analysis of system requirements to hardware, software and test requirements
* Effective communication skills (both verbal and written)
* Self-motivated, accountable, detail-oriented

HIGHLY PREFERRED SKILLS:
* Experience with ARINC 664, Part 7 - Avionics Full-Duplex Switched Ethernet (AFDX)
* Experience with system certification to Design Assurance Level (DAL) A or DAL B.

PREFERRED SKILLS:
* Experience with DO-178
* Experience with DO-254
* Experience with IMA General Processing Modules (GPM)
* Experience with ARINC 429 and CAN 825 I/O

Apply to this job or any of our other openings at https://realtime.catsone.com/careers/

ABOUT THE COMPANY:
Real Time Consulting (RTC) exists to partner outstanding engineering talent to support our clients’ success. Unsurpassed service is delivered to our clients by upholding responsibility, teamwork and quality. Our primary commitment is to help our clients. Since 1997, RTC has been protecting and enhancing lives with safe, reliable, innovative solutions, providing full life-cycle design, development and testing of EMBEDDED ENGINEERING SYSTEMS and SOFTWARE SOLUTIONS with Program Management and Consulting Services. Our employees average 20+ years of versatile and accomplished expertise to our clients, driving continuous innovation forward. Employee’s innovative and analytical ideas are cultivated while maintaining the big picture vision in a fast-paced, changing environment. Our corporate values are to Uphold Responsibility, Support People, Promote Teamwork and Deliver Quality!

This position may require exposure to software, source code or technology that is subject to US export control laws and regulations (i.e., International Traffic in Arms Regulations or the Export Administration Regulations). To comply with these requirements, you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Departments of State or Commerce, as applicable.

RTCo is an Equal Opportunity Employer; employment with RTCo is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

To qualify for all positions with Real Time Companies, applicants must be legally authorized to work in the United States and should not require now, or in the future, sponsorship for employment visa status. Please be aware that Real Time Companies does not sponsor employment-based visas. Additionally, certain positions with Real Time Companies that involve work with government entities may have more restrictive employment status requirements, such as U.S. citizenship, based on security clearance requirements or other governmental requirements. Real Time Companies is an Equal Opportunity Employer M/F/D/V.
 
Job Location: Phoenix, AZ
Rate: Open
Per Diem: No
Overtime: Straight Time
Duration: 12 months
Start Date: ASAP
Input Date: 08/09/2021
Last Updated: 09/24/2021
Firm Name: REAL TIME CONSULTING
Attention: Kathy Heath
Address: 20601 N 19TH AVE STE 110
City, State: PHOENIX, AZ 85027
Phone: 623/792-8946
Website: www.real-time-consulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
A Systems Engineer job in Taunton, MA is currently available through Belcan. In this role, you will be responsible for participating in requirements analysis, requirements management, functional analysis, performance analysis, system design, trade studies, systems integration and test (verification) in the development and evaluation of networks and information systems. To be considered for this role, you will have a Bachelor's degree in Systems Engineering, or a related specialized area or field, plus a minimum of 2 years of relevant experience. A current active Department of Defense Secret security clearance is required at the time of hire.

Systems Engineer Job duties:

* Generation of system test work products by applying the appropriate standards, processes, procedures and tools.
* Development of functional, environmental, operational, and/or performance tests on hardware, software, and systems.
* Perform upgrades of software baseline.
* Perform upgrades of the networks including Virtual Machines, Servers, Routers, Switches, Firewalls, etc.

Qualifications:

* Solid understanding of Virtualization (VMWare) technologies.
* Experience integrating software on a common operating system.
* Experience with scripting and automation technologies.
* Experience testing and troubleshooting of hardware, software and systems for all phases of product development.

If you are interested in this Systems Engineer position in Taunton, MA please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 315062
Job Location: Taunton, MA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/06/2021
Last Updated: 11/30/2021
Firm Name: BELCAN TECHSERVICES
Attention: MackenzieHoldcraft
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
A Systems Engineer job in Platteville, WI is currently available at Belcan. This position can be worked remotely anywhere in the U.S. This is a direct, full-time position with benefits. To be considered for this role, you will need a Bachelor of Science degree in the engineering field, and a minimum of 12 years of experience within the aerospace and defense industry, preference for systems / hardware experience in the defense and space market or other highly regulated industry experience. This position requires travel.
Experience in designing electrical power systems in one or more of the following platforms is preferred: Spacecraft (Launch Vehicle), Satellites, and/or Engine Control systems.
This engineer should have experience designing EPS architectures that span functions that include power generation, regulation, and storage. The engineer must be able to identify suitable technology choices for these functions (e.g. solar arrays, batteries), perform trades studies to select the most appropriate technologies, then support the specification, design, and integration of those technologies within the architecture.
 
Job duties:
Candidates will be involved in leading, executing and / or oversight for designing an Electrical Power System that includes power generation, regulation and storage requirement. The key tasks include:
*        System requirements definition and management - requirements decomposition (functional analysis and allocation), definition, and traceability for functional and environmental requirements
* Architecture design and architecture capture -- defines the structure, behavior, and more views of the system that align with the Concept of Operations (CONOPS)
* Develop and deliver the design, specifications, and integration requirements to the systems teams
* Work across functional teams to investigate and solve problems, including trade studies and optimization activities that effect the architecture
* Collaborate vertically and across the systems teams to assure the architecture meets stakeholders needs as well as mission requirements and objectives.
* Communicate effectively and with clarity what the architecture definition is, its maturity and evolution to a wide variety of audiences and stakeholders
*      Help raise the level of performance of the team through a collaborative team setting, consistent communication, and willingness to help others achieve success
 
Qualifications:
*        Bachelor of Science degree in systems engineering, aerospace engineering, electrical engineering, equivalent engineering degree from an accredited institution or relevant equivalent experience.
*        12+ years systems or electrical engineering or similar relevant experience in electrical power systems
* Hands on experience in electrical power system life cycle development to DO-178C DAL B or higher (or similar)
* Demonstrated experience in system development where rigorous process and regulatory standards are required, including standards such as ARP-4754, DO-178B/C, DO-160 and Mil Standards
* Atlassian tools experience (JIRA, Confluence, Git)
* DOORs / DOORS NextGen tools experience
* Matlab / Simulink experience is desired
* Proficiency in systems tools, simulation testing environments, scripting, programming and analysis (such as C++/C, Python, Java, Javascript, MagicDraw, Rhapsody, CAMEO etc…)
*        Ability to deal with ambiguity, investigate and solve problems, work across multi-discipline teams, and to recommend solutions to complex system level problems
*        Legal authorization to work in the U.S. is required

 
Job Number: 315602
Job Location: Platteville, WI
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/24/2021
Last Updated: 11/29/2021
Firm Name: BELCAN TECHSERVICES
Attention: SumitDas
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
A Systems Engineer job in Phoenix, AZ is currently available at Belcan. This job can be worked remotely from anywhere in the U.S. This is a direct, full-time position with benefits. To be considered for this role, you will need a Bachelor of Science degree in the engineering field, and a minimum of 5 years of experience within the aerospace and defense industry, preference for systems / software experience in the defense and space market or other highly regulated industry experience. This position requires travel.
Experience in avionics related software in one or more of the following platforms is preferred: Spacecraft (Launch Vehicle), Satellite, Propulsion Systems, GNC systems, Electrical Power or Engine Control systems.
Job duties:
Candidates will be involved in leading, executing and / or oversight for various systems engineering tasks including:
*        Avionics system requirements definition and management - specifically the decomposition of systems requirements into high level requirements (HLR) / low level software requirements (LLR)
* Perform requirements decomposition (functional analysis and allocation), definition, and traceability for functional and environmental requirements
* Experience in one or more of the following avionics domains is required: health monitoring, fault detection, and controls related application(s)
* Architecture design capture -- defines the structure, behavior, and more views of the system that align with the Concept of Operations (CONOPS)
* Develop and manage interface and control data / documentation (ICD) for systems and associated sub-systems
* Work across functional teams to investigate and solve problems, including trade studies and optimization activities
* Develop automated simulation and test emulation solutions
*        Support System integration testing and functional testing planning, procedures and testing activities
* Perform verification related activities in a process-oriented environment consistent with industry regulatory approval standards (Mil Standards, ARP-4754, DO-178C, SYSML). Specifically, perform verification strategy, planning, method definition, procedure development, compliance and testing
*      Help raise the level of performance of the team through a collaborative team setting, consistent communication, and willingness to help others achieve success
* Apply strong interpersonal skills to communicate with clarity and be responsive to the team and its stakeholders
 
Qualifications:
*        Bachelor of Science degree in systems engineering, aerospace engineering, electrical engineering, equivalent engineering degree from an accredited institution or relevant equivalent experience.
*        5+ years systems engineering or similar relevant experience in avionics system / software platforms
* Hands on experience in avionics life cycle development to DO-178C DAL C or higher (or similar)
* Demonstrated experience in system development where rigorous process and regulatory standards are required, including standards such as ARP-4754, DO-178B/C, Mil Standards
* Atlassian tools experience (JIRA, Confluence, Git)
* DOORs / DOORS NextGen tools experience
* Matlab / Simulink experience is desired
* Proficiency in systems tools, simulation testing environments, scripting, programming and analysis (such as C++/C, Python, Java, Javascript, MagicDraw, Rhapsody, CAMEO etc…)
*        Ability to deal with ambiguity, investigate and solve problems, work across multi-discipline teams, and to recommend solutions to complex system level problems
*        Legal authorization to work in the U.S. is required/US Citizenship only

 
Job Number: 315594
Job Location: Phoenix, AZ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/24/2021
Last Updated: 01/24/2022
Firm Name: BELCAN TECHSERVICES
Attention: MayankDubey
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
Applies an interdisciplinary, collaborative approach to lead activities to plan, design, develop and verify complex lifecycle balanced system of systems and system solutions. Leads others to evaluate customer/operational needs to define system performance requirements, integrate technical parameters and assure compatibility of all physical, functional and program interfaces. Leads analyses to optimize total system of systems and/or system architecture. Leads analyses for affordability, safety, reliability, maintainability, testability, human systems integration, survivability, vulnerability, susceptibility, system security, regulatory, certification, product assurance and other specialties quality factors into a preferred configuration to ensure mission success. Leads, develops, maintains and identifies improvements the planning, organization, implementation and monitoring of requirements management processes, tools, risk, issues, opportunity management and technology readiness assessment processes.

Education:
Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.


Additional Comments: Top skills/knowledge looking for in Systems Engineering Contractors

1. Detailed knowledge of ARP4754 and experience applying it to aerospace vehicle development
2. Requirement development, management and analysis using DOORS
3. Operational and Functional Analysis
 
Job Number: 46493-1
Job Location: Everett, WA
Rate: $85-$108/hr
Per Diem: Split
Overtime: Yes
Duration: 6-12 months+
Start Date: ASAP
Input Date: 08/03/2021
Last Updated: 05/26/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Garrett Smart
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
A Systems Engineer job in Windsor, CT is currently available at Belcan. This position can be worked remotely anywhere in the U.S. This is a direct, full-time position with benefits. To be considered for this role, you will need a Bachelor of Science degree in the engineering field, and a minimum of 12 years of experience within the aerospace and defense industry, preference for systems / hardware experience in the defense and space market or other highly regulated industry experience. This position requires travel.
Experience in designing electrical power systems in one or more of the following platforms is preferred: Spacecraft (Launch Vehicle), Satellites, and/or Engine Control systems.

This engineer should have experience designing EPS architectures that span functions that include power generation, regulation, and storage. The engineer must be able to identify suitable technology choices for these functions (e.g. solar arrays, batteries), perform trades studies to select the most appropriate technologies, then support the specification, design, and integration of those technologies within the architecture.
Job duties:

Candidates will be involved in leading, executing and / or oversight for designing an Electrical Power System that includes power generation, regulation and storage requirement. The key tasks include:
· System requirements definition and management - requirements decomposition (functional analysis and allocation), definition, and traceability for functional and environmental requirements
· Architecture design and architecture capture -- defines the structure, behavior, and more views of the system that align with the Concept of Operations (CONOPS)
· Develop and deliver the design, specifications, and integration requirements to the systems teams
· Work across functional teams to investigate and solve problems, including trade studies and optimization activities that effect the architecture
· Collaborate vertically and across the systems teams to assure the architecture meets stakeholders needs as well as mission requirements and objectives.
· Communicate effectively and with clarity what the architecture definition is, its maturity and evolution to a wide variety of audiences and stakeholders
· Help raise the level of performance of the team through a collaborative team setting, consistent communication, and willingness to help others achieve success

Qualifications:
· Bachelor of Science degree in systems engineering, aerospace engineering, electrical engineering, equivalent engineering degree from an accredited institution or relevant equivalent experience.
· 12+ years systems or electrical engineering or similar relevant experience in electrical power systems
· Hands on experience in electrical power system life cycle development to DO-178C DAL B or higher (or similar)
· Demonstrated experience in system development where rigorous process and regulatory standards are required, including standards such as ARP-4754, DO-178B/C, DO-160 and Mil Standards
· Atlassian tools experience (JIRA, Confluence, Git)
· DOORs / DOORS NextGen tools experience
· Matlab / Simulink experience is desired
· Proficiency in systems tools, simulation testing environments, scripting, programming and analysis (such as C++/C, Python, Java, Javascript, MagicDraw, Rhapsody, CAMEO etc?)
· Ability to deal with ambiguity, investigate and solve problems, work across multi-discipline teams, and to recommend solutions to complex system level problems
· Legal authorization to work in the U.S. is required


 
Job Number: 315449
Job Location: Windsor, CT
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/24/2021
Last Updated: 01/26/2022
Firm Name: BELCAN TECHSERVICES
Attention: BhargavSompalli
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
A Systems Engineer job in Bellevue, WA is currently available at Belcan. This job can be worked remotely from anywhere in the U.S. This is a direct, full-time position with benefits. To be considered for this role, you will need a Bachelor of Science degree in the engineering field, and a minimum of 5 years of experience within the aerospace and defense industry, preference for systems / software experience in the defense and space market or other highly regulated industry experience. This position requires travel.
Experience in avionics related software in one or more of the following platforms is preferred: Spacecraft (Launch Vehicle), Satellite, Propulsion Systems, GNC systems, Electrical Power or Engine Control systems.
Job duties:
Candidates will be involved in leading, executing and / or oversight for various systems engineering tasks including:
*        Avionics system requirements definition and management - specifically the decomposition of systems requirements into high level requirements (HLR) / low level software requirements (LLR)
* Perform requirements decomposition (functional analysis and allocation), definition, and traceability for functional and environmental requirements
* Experience in one or more of the following avionics domains is required: health monitoring, fault detection, and controls related application(s)
* Architecture design capture -- defines the structure, behavior, and more views of the system that align with the Concept of Operations (CONOPS)
* Develop and manage interface and control data / documentation (ICD) for systems and associated sub-systems
* Work across functional teams to investigate and solve problems, including trade studies and optimization activities
* Develop automated simulation and test emulation solutions
*        Support System integration testing and functional testing planning, procedures and testing activities
* Perform verification related activities in a process-oriented environment consistent with industry regulatory approval standards (Mil Standards, ARP-4754, DO-178C, SYSML). Specifically, perform verification strategy, planning, method definition, procedure development, compliance and testing
*      Help raise the level of performance of the team through a collaborative team setting, consistent communication, and willingness to help others achieve success
* Apply strong interpersonal skills to communicate with clarity and be responsive to the team and its stakeholders
 
Qualifications:
*        Bachelor of Science degree in systems engineering, aerospace engineering, electrical engineering, equivalent engineering degree from an accredited institution or relevant equivalent experience.
*        5+ years systems engineering or similar relevant experience in avionics system / software platforms
* Hands on experience in avionics life cycle development to DO-178C DAL C or higher (or similar)
* Demonstrated experience in system development where rigorous process and regulatory standards are required, including standards such as ARP-4754, DO-178B/C, Mil Standards
* Atlassian tools experience (JIRA, Confluence, Git)
* DOORs / DOORS NextGen tools experience
* Matlab / Simulink experience is desired
* Proficiency in systems tools, simulation testing environments, scripting, programming and analysis (such as C++/C, Python, Java, Javascript, MagicDraw, Rhapsody, CAMEO etc…)
*        Ability to deal with ambiguity, investigate and solve problems, work across multi-discipline teams, and to recommend solutions to complex system level problems
*        Legal authorization to work in the U.S. is required/US Citizenship only

 
Job Number: 315446
Job Location: Bellevue, WA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/24/2021
Last Updated: 02/08/2022
Firm Name: BELCAN TECHSERVICES
Attention: MayankDubey
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
A Systems Engineer job in Bellevue, WA is currently available at Belcan. However, this position can be worked remotely from anywhere in the U.S. This is a full time position with benefits. To be considered for this role, you will need a Bachelor of Science degree in the engineering field, and a minimum of 5 years of experience within the aerospace and defense industry, preference for systems / hardware experience in the defense and space market or other highly regulated industry experience.

Experience in avionics related hardware in one or more of the following platforms is preferred: Spacecraft (Launch Vehicle), Satellite, Propulsion Systems, Electrical Power or Engine Control systems.

Job duties:
Candidates will be involved in leading, executing and / or oversight for various systems engineering tasks including:
*        Avionics system requirements definition and management - specifically the decomposition of systems requirements into hardware related high level requirements (HLR) / low level requirements (LLR), including environmental related requirements
* Perform requirements decomposition (functional analysis and allocation), definition, and traceability for functional and environmental requirements
* Experience in one or more of the following avionics domains is required: health monitoring, fault detection, and controls related application(s)
* Architecture design capture -- defines the structure, behavior, and more views of the system that align with the Concept of Operations (CONOPS)
* Develop and manage interface and control data / documentation (ICD) for systems and associated sub-systems
* Work across functional teams to investigate and solve problems, including trade studies and optimization activities
* Develop automated simulation and test emulation solutions
*        Support System integration testing and functional testing planning, procedures and testing activities
* Perform verification related activities in a process-oriented environment consistent with industry regulatory approval standards (Mil Standards, ARP-4754, DO-178C, SYSML). Specifically, perform verification strategy, planning, method definition, procedure development, compliance and testing
*      Help raise the level of performance of the team through a collaborative team setting, consistent communication, and willingness to help others achieve success
 
Qualifications:
*        Bachelor of Science degree in systems engineering, aerospace engineering, electrical engineering, equivalent engineering degree from an accredited institution or relevant equivalent experience.
*        5+ years systems or electrical engineering or similar relevant experience in avionics related hardware platforms
* Demonstrated experience in system development where rigorous process and regulatory standards are required, including standards such as ARP-4754, DO-178B/C, DO-160 and Mil Standards
* Atlassian tools experience (JIRA, Confluence, Git)
* DOORs / DOORS NextGen tools experience
* Matlab / Simulink experience is desired
* Proficiency in systems tools, simulation testing environments, scripting, programming and analysis (such as C++/C, Python, Java, Javascript, MagicDraw, Rhapsody, CAMEO etc…)
*        Ability to deal with ambiguity, investigate and solve problems, work across multi-discipline teams, and to recommend solutions to complex system level problems
*        Legal authorization to work in the U.S. is required
 
Job Number: 315440
Job Location: Bellevue, WA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/24/2021
Last Updated: 12/28/2021
Firm Name: BELCAN TECHSERVICES
Attention: KeturahCarhee
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
A Systems Engineer job in Bellevue, WA is currently available at Belcan. This job can be worked remotely from anywhere in the U.S. This is a direct, full-time position with benefits. To be considered for this role, you will need a Bachelor of Science degree in the engineering field, and a minimum of 7 years of experience within the aerospace and defense industry, preference for systems / hardware experience in the defense and space market or other highly regulated industry experience.
Experience in avionics related hardware and software in one or more of the following platforms is preferred: Spacecraft (Launch Vehicle), Satellites, and/or Engine Control systems.
This engineer should be able to work both functional and environmental electronic hardware requirements. Given the nature of the role, experience with embedded software systems engineering is a highly desired.

Job duties:
Candidates will be involved in leading, executing and / or oversight for various systems engineering tasks including:
* Develop Avionics component specifications (controller hardware and software) from Engine Control System Design data / artifacts
* Develop and validate hardware requirements data / artifacts.
*        Avionics system requirements definition and management - specifically the decomposition of systems requirements into hardware related high level requirements (HLR) / low level requirements (LLR), including environmental related requirements
* Perform requirements decomposition (functional analysis and allocation), definition, and traceability for functional and environmental requirements
* Experience in avionics embedded software or equivalent is highly desired
* Architecture design capture -- defines the structure, behavior, and more views of the system that align with the Concept of Operations (CONOPS)
* Develop and manage interface and control data / documentation (ICD) for systems and associated sub-systems
* Work across functional teams to investigate and solve problems, including trade studies and optimization activities
* Perform verification related activities in a process-oriented environment consistent with industry regulatory approval standards (Mil Standards, ARP-4754, DO-178C, SYSML). Specifically, perform verification strategy, planning, method definition, procedure development, compliance and testing
*      Help raise the level of performance of the team through a collaborative team setting, consistent communication, and willingness to help others achieve success
 
Qualifications:
*        Bachelor of Science degree in systems engineering, aerospace engineering, electrical engineering, equivalent engineering degree from an accredited institution or relevant equivalent experience.
*        5+ years systems or electrical engineering or similar relevant experience in avionics related hardware platforms
* Hands on experience in avionics life cycle development to DO-178C DAL C or higher (or similar)
* Demonstrated experience in system development where rigorous process and regulatory standards are required, including standards such as ARP-4754, DO-178B/C, DO-160 and Mil Standards
* Atlassian tools experience (JIRA, Confluence, Git)
* DOORs / DOORS NextGen tools experience
* Matlab / Simulink experience is desired
* Proficiency in systems tools, simulation testing environments, scripting, programming and analysis (such as C++/C, Python, Java, Javascript, MagicDraw, Rhapsody, CAMEO etc…)
*        Ability to deal with ambiguity, investigate and solve problems, work across multi-discipline teams, and to recommend solutions to complex system level problems
*        Legal authorization to work in the U.S. is required

 
Job Number: 315443
Job Location: Bellevue, WA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/24/2021
Last Updated: 12/28/2021
Firm Name: BELCAN TECHSERVICES
Attention: SusheelNorbert
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
A Systems Engineer job in Windsor, CT is currently available at Belcan. This job can be worked remotely from anywhere in the U.S. This is a direct, full-time position with benefits. To be considered for this role, you will need a Bachelor of Science degree in the engineering field, and a minimum of 7 years of experience within the aerospace and defense industry, preference for systems / hardware experience in the defense and space market or other highly regulated industry experience.
Experience in avionics related hardware and software in one or more of the following platforms is preferred: Spacecraft (Launch Vehicle), Satellites, and/or Engine Control systems.
This engineer should be able to work both functional and environmental electronic hardware requirements. Given the nature of the role, experience with embedded software systems engineering is a highly desired.

Job duties:
Candidates will be involved in leading, executing and / or oversight for various systems engineering tasks including:
* Develop Avionics component specifications (controller hardware and software) from Engine Control System Design data / artifacts
* Develop and validate hardware requirements data / artifacts.
*        Avionics system requirements definition and management - specifically the decomposition of systems requirements into hardware related high level requirements (HLR) / low level requirements (LLR), including environmental related requirements
* Perform requirements decomposition (functional analysis and allocation), definition, and traceability for functional and environmental requirements
* Experience in avionics embedded software or equivalent is highly desired
* Architecture design capture -- defines the structure, behavior, and more views of the system that align with the Concept of Operations (CONOPS)
* Develop and manage interface and control data / documentation (ICD) for systems and associated sub-systems
* Work across functional teams to investigate and solve problems, including trade studies and optimization activities
* Perform verification related activities in a process-oriented environment consistent with industry regulatory approval standards (Mil Standards, ARP-4754, DO-178C, SYSML). Specifically, perform verification strategy, planning, method definition, procedure development, compliance and testing
*      Help raise the level of performance of the team through a collaborative team setting, consistent communication, and willingness to help others achieve success
 
Qualifications:
*        Bachelor of Science degree in systems engineering, aerospace engineering, electrical engineering, equivalent engineering degree from an accredited institution or relevant equivalent experience.
*        5+ years systems or electrical engineering or similar relevant experience in avionics related hardware platforms
* Hands on experience in avionics life cycle development to DO-178C DAL C or higher (or similar)
* Demonstrated experience in system development where rigorous process and regulatory standards are required, including standards such as ARP-4754, DO-178B/C, DO-160 and Mil Standards
* Atlassian tools experience (JIRA, Confluence, Git)
* DOORs / DOORS NextGen tools experience
* Matlab / Simulink experience is desired
* Proficiency in systems tools, simulation testing environments, scripting, programming and analysis (such as C++/C, Python, Java, Javascript, MagicDraw, Rhapsody, CAMEO etc…)
*        Ability to deal with ambiguity, investigate and solve problems, work across multi-discipline teams, and to recommend solutions to complex system level problems
*        Legal authorization to work in the U.S. is required

 
Job Number: 315598
Job Location: Windsor, CT
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/24/2021
Last Updated: 12/28/2021
Firm Name: BELCAN TECHSERVICES
Attention: SusheelNorbert
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
A Systems Engineer job in Windsor, CT is currently available at Belcan. However, this position can be worked remotely from anywhere in the U.S. This is a full time position with benefits. To be considered for this role, you will need a Bachelor of Science degree in the engineering field, and a minimum of 5 years of experience within the aerospace and defense industry, preference for systems / hardware experience in the defense and space market or other highly regulated industry experience.

Experience in avionics related hardware in one or more of the following platforms is preferred: Spacecraft (Launch Vehicle), Satellite, Propulsion Systems, Electrical Power or Engine Control systems.

Job duties:
Candidates will be involved in leading, executing and / or oversight for various systems engineering tasks including:
*        Avionics system requirements definition and management - specifically the decomposition of systems requirements into hardware related high level requirements (HLR) / low level requirements (LLR), including environmental related requirements
* Perform requirements decomposition (functional analysis and allocation), definition, and traceability for functional and environmental requirements
* Experience in one or more of the following avionics domains is required: health monitoring, fault detection, and controls related application(s)
* Architecture design capture -- defines the structure, behavior, and more views of the system that align with the Concept of Operations (CONOPS)
* Develop and manage interface and control data / documentation (ICD) for systems and associated sub-systems
* Work across functional teams to investigate and solve problems, including trade studies and optimization activities
* Develop automated simulation and test emulation solutions
*        Support System integration testing and functional testing planning, procedures and testing activities
* Perform verification related activities in a process-oriented environment consistent with industry regulatory approval standards (Mil Standards, ARP-4754, DO-178C, SYSML). Specifically, perform verification strategy, planning, method definition, procedure development, compliance and testing
*      Help raise the level of performance of the team through a collaborative team setting, consistent communication, and willingness to help others achieve success
 
Qualifications:
*        Bachelor of Science degree in systems engineering, aerospace engineering, electrical engineering, equivalent engineering degree from an accredited institution or relevant equivalent experience.
*        5+ years systems or electrical engineering or similar relevant experience in avionics related hardware platforms
* Demonstrated experience in system development where rigorous process and regulatory standards are required, including standards such as ARP-4754, DO-178B/C, DO-160 and Mil Standards
* Atlassian tools experience (JIRA, Confluence, Git)
* DOORs / DOORS NextGen tools experience
* Matlab / Simulink experience is desired
* Proficiency in systems tools, simulation testing environments, scripting, programming and analysis (such as C++/C, Python, Java, Javascript, MagicDraw, Rhapsody, CAMEO etc…)
*        Ability to deal with ambiguity, investigate and solve problems, work across multi-discipline teams, and to recommend solutions to complex system level problems
*        Legal authorization to work in the U.S. is required
 
Job Number: 315593
Job Location: Windsor, CT
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/24/2021
Last Updated: 12/28/2021
Firm Name: BELCAN TECHSERVICES
Attention: SusheelNorbert
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
A Systems Engineer job in Rockford, IL is currently available at Belcan. This position can be worked remotely anywhere in the U.S. This is a direct, full-time position with benefits. To be considered for this role, you will need a Bachelor of Science degree in the engineering field, and a minimum of 12 years of experience within the aerospace and defense industry, preference for systems / hardware experience in the defense and space market or other highly regulated industry experience. This position requires travel.
Experience in designing electrical power systems in one or more of the following platforms is preferred: Spacecraft (Launch Vehicle), Satellites, and/or Engine Control systems.
This engineer should have experience designing EPS architectures that span functions that include power generation, regulation, and storage. The engineer must be able to identify suitable technology choices for these functions (e.g. solar arrays, batteries), perform trades studies to select the most appropriate technologies, then support the specification, design, and integration of those technologies within the architecture.
 
Job duties:
Candidates will be involved in leading, executing and / or oversight for designing an Electrical Power System that includes power generation, regulation and storage requirement. The key tasks include:
*        System requirements definition and management - requirements decomposition (functional analysis and allocation), definition, and traceability for functional and environmental requirements
* Architecture design and architecture capture -- defines the structure, behavior, and more views of the system that align with the Concept of Operations (CONOPS)
* Develop and deliver the design, specifications, and integration requirements to the systems teams
* Work across functional teams to investigate and solve problems, including trade studies and optimization activities that effect the architecture
* Collaborate vertically and across the systems teams to assure the architecture meets stakeholders needs as well as mission requirements and objectives.
* Communicate effectively and with clarity what the architecture definition is, its maturity and evolution to a wide variety of audiences and stakeholders
*      Help raise the level of performance of the team through a collaborative team setting, consistent communication, and willingness to help others achieve success
 
Qualifications:
*        Bachelor of Science degree in systems engineering, aerospace engineering, electrical engineering, equivalent engineering degree from an accredited institution or relevant equivalent experience.
*        12+ years systems or electrical engineering or similar relevant experience in electrical power systems
* Hands on experience in electrical power system life cycle development to DO-178C DAL B or higher (or similar)
* Demonstrated experience in system development where rigorous process and regulatory standards are required, including standards such as ARP-4754, DO-178B/C, DO-160 and Mil Standards
* Atlassian tools experience (JIRA, Confluence, Git)
* DOORs / DOORS NextGen tools experience
* Matlab / Simulink experience is desired
* Proficiency in systems tools, simulation testing environments, scripting, programming and analysis (such as C++/C, Python, Java, Javascript, MagicDraw, Rhapsody, CAMEO etc…)
*        Ability to deal with ambiguity, investigate and solve problems, work across multi-discipline teams, and to recommend solutions to complex system level problems
*        Legal authorization to work in the U.S. is required

 
Job Number: 315601
Job Location: Rockford, IL
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/24/2021
Last Updated: 12/07/2021
Firm Name: BELCAN TECHSERVICES
Attention: SumitDas
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
A Systems Engineer job in Indianapolis, IN is currently available at Belcan. This job can be worked remotely from anywhere in the U.S. This is a direct, full-time position with benefits. To be considered for this role, you will need a Bachelor of Science degree in the engineering field, and a minimum of 7 years of experience within the aerospace and defense industry, preference for systems / hardware experience in the defense and space market or other highly regulated industry experience.
Experience in avionics related hardware and software in one or more of the following platforms is preferred: Spacecraft (Launch Vehicle), Satellites, and/or Engine Control systems.
This engineer should be able to work both functional and environmental electronic hardware requirements. Given the nature of the role, experience with embedded software systems engineering is a highly desired.

Job duties:
Candidates will be involved in leading, executing and / or oversight for various systems engineering tasks including:
* Develop Avionics component specifications (controller hardware and software) from Engine Control System Design data / artifacts
* Develop and validate hardware requirements data / artifacts.
*        Avionics system requirements definition and management - specifically the decomposition of systems requirements into hardware related high level requirements (HLR) / low level requirements (LLR), including environmental related requirements
* Perform requirements decomposition (functional analysis and allocation), definition, and traceability for functional and environmental requirements
* Experience in avionics embedded software or equivalent is highly desired
* Architecture design capture -- defines the structure, behavior, and more views of the system that align with the Concept of Operations (CONOPS)
* Develop and manage interface and control data / documentation (ICD) for systems and associated sub-systems
* Work across functional teams to investigate and solve problems, including trade studies and optimization activities
* Perform verification related activities in a process-oriented environment consistent with industry regulatory approval standards (Mil Standards, ARP-4754, DO-178C, SYSML). Specifically, perform verification strategy, planning, method definition, procedure development, compliance and testing
*      Help raise the level of performance of the team through a collaborative team setting, consistent communication, and willingness to help others achieve success
 
Qualifications:
*        Bachelor of Science degree in systems engineering, aerospace engineering, electrical engineering, equivalent engineering degree from an accredited institution or relevant equivalent experience.
*        5+ years systems or electrical engineering or similar relevant experience in avionics related hardware platforms
* Hands on experience in avionics life cycle development to DO-178C DAL C or higher (or similar)
* Demonstrated experience in system development where rigorous process and regulatory standards are required, including standards such as ARP-4754, DO-178B/C, DO-160 and Mil Standards
* Atlassian tools experience (JIRA, Confluence, Git)
* DOORs / DOORS NextGen tools experience
* Matlab / Simulink experience is desired
* Proficiency in systems tools, simulation testing environments, scripting, programming and analysis (such as C++/C, Python, Java, Javascript, MagicDraw, Rhapsody, CAMEO etc…)
*        Ability to deal with ambiguity, investigate and solve problems, work across multi-discipline teams, and to recommend solutions to complex system level problems
*        Legal authorization to work in the U.S. is required

 
Job Number: 315599
Job Location: Indianapolis, IN
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/24/2021
Last Updated: 12/28/2021
Firm Name: BELCAN TECHSERVICES
Attention: SusheelNorbert
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
A Systems Engineer job in Indianapolis, IN is currently available at Belcan. This position can be worked remotely anywhere in the U.S. This is a direct, full-time position with benefits. To be considered for this role, you will need a Bachelor of Science degree in the engineering field, and a minimum of 12 years of experience within the aerospace and defense industry, preference for systems / hardware experience in the defense and space market or other highly regulated industry experience. This position requires travel.
Experience in designing electrical power systems in one or more of the following platforms is preferred: Spacecraft (Launch Vehicle), Satellites, and/or Engine Control systems.
This engineer should have experience designing EPS architectures that span functions that include power generation, regulation, and storage. The engineer must be able to identify suitable technology choices for these functions (e.g. solar arrays, batteries), perform trades studies to select the most appropriate technologies, then support the specification, design, and integration of those technologies within the architecture.
 
Job duties:
Candidates will be involved in leading, executing and / or oversight for designing an Electrical Power System that includes power generation, regulation and storage requirement. The key tasks include:
*        System requirements definition and management - requirements decomposition (functional analysis and allocation), definition, and traceability for functional and environmental requirements
* Architecture design and architecture capture -- defines the structure, behavior, and more views of the system that align with the Concept of Operations (CONOPS)
* Develop and deliver the design, specifications, and integration requirements to the systems teams
* Work across functional teams to investigate and solve problems, including trade studies and optimization activities that effect the architecture
* Collaborate vertically and across the systems teams to assure the architecture meets stakeholders needs as well as mission requirements and objectives.
* Communicate effectively and with clarity what the architecture definition is, its maturity and evolution to a wide variety of audiences and stakeholders
*      Help raise the level of performance of the team through a collaborative team setting, consistent communication, and willingness to help others achieve success
 
Qualifications:
*        Bachelor of Science degree in systems engineering, aerospace engineering, electrical engineering, equivalent engineering degree from an accredited institution or relevant equivalent experience.
*        12+ years systems or electrical engineering or similar relevant experience in electrical power systems
* Hands on experience in electrical power system life cycle development to DO-178C DAL B or higher (or similar)
* Demonstrated experience in system development where rigorous process and regulatory standards are required, including standards such as ARP-4754, DO-178B/C, DO-160 and Mil Standards
* Atlassian tools experience (JIRA, Confluence, Git)
* DOORs / DOORS NextGen tools experience
* Matlab / Simulink experience is desired
* Proficiency in systems tools, simulation testing environments, scripting, programming and analysis (such as C++/C, Python, Java, Javascript, MagicDraw, Rhapsody, CAMEO etc…)
*        Ability to deal with ambiguity, investigate and solve problems, work across multi-discipline teams, and to recommend solutions to complex system level problems
*        Legal authorization to work in the U.S. is required

 
Job Number: 315600
Job Location: Indianapolis, IN
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/24/2021
Last Updated: 01/16/2022
Firm Name: BELCAN TECHSERVICES
Attention: SumitDas
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
Job description:

****Systems Architect ******

This architect will work with the Business Area/Program/Project to:

• Meet and understand the business and engineering customers/stakeholders and their disciplines

• Understand their current-state architectures (processes/systems/data/roles)

• Understand their needs/requests/requirements/desirements

• Work with customers/stakeholders and IT to collaboratively:

* Define the solution space and lead trade analyses within and across the relevant domains – technical (IT and non-IT) and non-technical

* Develop future-state conceptual architectures that are implementable, secure, scalable and supportable

* Decompose those conceptual architectures into functions that can be allocated to processes/systems/data/roles

* Support trade analyses within and across the relevant domains

• Do the above for Programs that work at both unclassified and classified levels, need a CONOPS that supports all levels simultaneously, and require architectures to implement that



****CANDIDATES MUST HAVE A Strong understanding and experience modeling systems in SysML, using No Magic Cameo ****



• Bachelors degree from an accredited college in a related discipline, or equivalent experience/combined education, with 14 years or more of professional experience; or 12 years of professional experience with a related Masters degree.

• 3+ years working as an IT Architect

• Broad experience across IT technical disciplines: applications, infrastructure (compute, network, storage) and cybersecurity

• Understanding of security principles in general and how to map/trace them to IT systems, components and functions

• Broad, basic understanding of business and engineering activities/disciplines in DoD/Aerospace, including some experience working classified projects

• Demonstrated capability to communicate clearly – verbally, textually and graphically – to technical and non-technical stakeholders at the Director level and below

• Possess excellent English communication skills, both written, verbal, and presentation, to effectively communicate business cases to all levels of peers, suppliers, as well as program and executive management

• You will need to be a US Citizen, and be able to obtain and maintain a US DoD SECRET clearance, to support this government contract, as well as successfully pass a drug and background check, in order to meet eligibility requirements for access to classified information

• 5+ years working as an IT Architect

• Experience presenting at reviews with Customers and/or Senior Leadership

• Experience architecting systems in an Agile environment

• 3+ years using System Modeling Tools (No Magic/Cameo) to perform MBSE or System Architecture work

6 - 10 years or master's degree 4 - 8 years in IT and at least 3+ years as an IT Architect using No Magic Cameo.

****Provide a detailed account of the No Magic Cameo. Any candidates without experience will be declined.

Bachelor's degree - will overlook a BA for the right candidate that meets all other requirements

**Looking for an Enterprise Architect**
 
Job Number: CJH-6232
Job Location: Littleton/Waterton, CO
Rate: 64
Per Diem: 'Split'
Duration: 5 mos
Start Date: ASAP
Input Date: 08/05/2021
Last Updated: 09/08/2021
Firm Name: INDOTRONIX INTERNATIONAL CORPORATION
Attention: Venkat Manta
Address: 687 LEE RD STE 350
City, State: ROCHESTER, NY 14606
Phone: 845/473-1137
Website: www.iic.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer Generalist

Description:
A Systems Engineer job in Bellevue, WA is currently available with Belcan. However, this job can be worked remotely from anywhere in the U.S. This is a direct, full-time position with benefits. To be considered for this role, you will need a Bachelor of Science degree in the engineering field, and a minimum of 5 years of experience within the aerospace and defense industry, preference for defense and space experience or other highly regulated industry experience. Domain experience in one or more of the following is preferred: Spacecraft (Launch Vehicle), Satellite, Propulsion Systems, GNC systems, Electrical Power or Engine Control systems.

Job duties:
Candidates will be involved in leading, executing and / or oversight for various systems engineering tasks including:
* System requirements definition and management - requirements decomposition (functional analysis and allocation), definition, and traceability for functional and environmental requirements
* Architecture design capture -- defines the structure, behavior, and more views of the system that align with the Concept of Operations (CONOPS)
* Develop and manage interface and control data / documentation (ICD) for systems and associated sub-systems
* Work across functional teams to investigate and solve problems, including trade studies and optimization activities
* Develop automated simulation and test emulation solutions
* Support System integration testing and functional testing planning, procedures and testing activities
* Perform verification related activities in a process-oriented environment consistent with industry regulatory approval standards (Mil Standards, ARP-4754, DO-178C, SYSML). Specifically, perform verification strategy, planning, method definition, procedure development, compliance and testing
* Help raise the level of performance of the team through a collaborative team setting, consistent communication, and willingness to help others achieve success

Qualifications:
* Bachelor of Science degree in systems engineering, aerospace engineering, electrical engineering, equivalent engineering degree from an accredited institution or relevant equivalent experience.
* 5+ years systems engineering or similar relevant experience
* Demonstrated experience in system development where rigorous process and regulatory standards are required, including standards such as ARP-4754, DO-178B/C, Mil Standards
* Atlassian tools experience (JIRA, Confluence, Git)
* DOORs / DOORS NextGen tools experience
* Rational Quality Manager experience
* Matlab / Simulink experience is desired
* Proficiency in systems tools, simulation testing environments, scripting, programming and analysis (such as C++/C, Python, Java, Javascript, MagicDraw, Rhapsody, CAMEO etc…)
* Ability to deal with ambiguity, investigate and solve problems, work across multi-discipline teams, and to recommend solutions to complex system level problems
* Legal authorization to work in the U.S. is required/US Citizenship only

 
Job Number: 315589
Job Location: Bellevue, WA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/24/2021
Last Updated: 01/26/2022
Firm Name: BELCAN TECHSERVICES
Attention: SusheelNorbert
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer Generalist

Description:
A Systems Engineer job in Cincinnati, OH is currently available with Belcan. However, this job can be worked remotely from anywhere in the U.S. This is a direct, full-time position with benefits. To be considered for this role, you will need a Bachelor of Science degree in the engineering field, and a minimum of 5 years of experience within the aerospace and defense industry, preference for defense and space experience or other highly regulated industry experience. Domain experience in one or more of the following is preferred: Spacecraft (Launch Vehicle), Satellite, Propulsion Systems, GNC systems, Electrical Power or Engine Control systems.

Job duties:
Candidates will be involved in leading, executing and / or oversight for various systems engineering tasks including:
* System requirements definition and management - requirements decomposition (functional analysis and allocation), definition, and traceability for functional and environmental requirements
* Architecture design capture -- defines the structure, behavior, and more views of the system that align with the Concept of Operations (CONOPS)
* Develop and manage interface and control data / documentation (ICD) for systems and associated sub-systems
* Work across functional teams to investigate and solve problems, including trade studies and optimization activities
* Develop automated simulation and test emulation solutions
* Support System integration testing and functional testing planning, procedures and testing activities
* Perform verification related activities in a process-oriented environment consistent with industry regulatory approval standards (Mil Standards, ARP-4754, DO-178C, SYSML). Specifically, perform verification strategy, planning, method definition, procedure development, compliance and testing
* Help raise the level of performance of the team through a collaborative team setting, consistent communication, and willingness to help others achieve success

Qualifications:
* Bachelor of Science degree in systems engineering, aerospace engineering, electrical engineering, equivalent engineering degree from an accredited institution or relevant equivalent experience.
* 5+ years systems engineering or similar relevant experience
* Demonstrated experience in system development where rigorous process and regulatory standards are required, including standards such as ARP-4754, DO-178B/C, Mil Standards
* Atlassian tools experience (JIRA, Confluence, Git)
* DOORs / DOORS NextGen tools experience
* Rational Quality Manager experience
* Matlab / Simulink experience is desired
* Proficiency in systems tools, simulation testing environments, scripting, programming and analysis (such as C++/C, Python, Java, Javascript, MagicDraw, Rhapsody, CAMEO etc…)
* Ability to deal with ambiguity, investigate and solve problems, work across multi-discipline teams, and to recommend solutions to complex system level problems
* Legal authorization to work in the U.S. is required/US Citizenship only

 
Job Number: 315590
Job Location: Cincinnati, OH
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/24/2021
Last Updated: 01/26/2022
Firm Name: BELCAN TECHSERVICES
Attention: MayankDubey
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer Generalist

Description:
A Systems Engineer job in Phoenix, AZ is currently available with Belcan. However, this job can be worked remotely from anywhere in the U.S. This is a direct, full-time position with benefits. To be considered for this role, you will need a Bachelor of Science degree in the engineering field, and a minimum of 5 years of experience within the aerospace and defense industry, preference for defense and space experience or other highly regulated industry experience. Domain experience in one or more of the following is preferred: Spacecraft (Launch Vehicle), Satellite, Propulsion Systems, GNC systems, Electrical Power or Engine Control systems.

Job duties:
Candidates will be involved in leading, executing and / or oversight for various systems engineering tasks including:
* System requirements definition and management - requirements decomposition (functional analysis and allocation), definition, and traceability for functional and environmental requirements
* Architecture design capture -- defines the structure, behavior, and more views of the system that align with the Concept of Operations (CONOPS)
* Develop and manage interface and control data / documentation (ICD) for systems and associated sub-systems
* Work across functional teams to investigate and solve problems, including trade studies and optimization activities
* Develop automated simulation and test emulation solutions
* Support System integration testing and functional testing planning, procedures and testing activities
* Perform verification related activities in a process-oriented environment consistent with industry regulatory approval standards (Mil Standards, ARP-4754, DO-178C, SYSML). Specifically, perform verification strategy, planning, method definition, procedure development, compliance and testing
* Help raise the level of performance of the team through a collaborative team setting, consistent communication, and willingness to help others achieve success

Qualifications:
* Bachelor of Science degree in systems engineering, aerospace engineering, electrical engineering, equivalent engineering degree from an accredited institution or relevant equivalent experience.
* 5+ years systems engineering or similar relevant experience
* Demonstrated experience in system development where rigorous process and regulatory standards are required, including standards such as ARP-4754, DO-178B/C, Mil Standards
* Atlassian tools experience (JIRA, Confluence, Git)
* DOORs / DOORS NextGen tools experience
* Rational Quality Manager experience
* Matlab / Simulink experience is desired
* Proficiency in systems tools, simulation testing environments, scripting, programming and analysis (such as C++/C, Python, Java, Javascript, MagicDraw, Rhapsody, CAMEO etc…)
* Ability to deal with ambiguity, investigate and solve problems, work across multi-discipline teams, and to recommend solutions to complex system level problems
* Legal authorization to work in the U.S. is required/US Citizenship only

 
Job Number: 315592
Job Location: Phoenix, AZ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/24/2021
Last Updated: 12/28/2021
Firm Name: BELCAN TECHSERVICES
Attention: BhargavSompalli
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer Generalist

Description:
A Systems Engineer job in West Palm Beach, FL is currently available with Belcan. However, this job can be worked remotely from anywhere in the U.S. This is a direct, full-time position with benefits. To be considered for this role, you will need a Bachelor of Science degree in the engineering field, and a minimum of 5 years of experience within the aerospace and defense industry, preference for defense and space experience or other highly regulated industry experience. Domain experience in one or more of the following is preferred: Spacecraft (Launch Vehicle), Satellite, Propulsion Systems, GNC systems, Electrical Power or Engine Control systems.

Job duties:
Candidates will be involved in leading, executing and / or oversight for various systems engineering tasks including:
* System requirements definition and management - requirements decomposition (functional analysis and allocation), definition, and traceability for functional and environmental requirements
* Architecture design capture -- defines the structure, behavior, and more views of the system that align with the Concept of Operations (CONOPS)
* Develop and manage interface and control data / documentation (ICD) for systems and associated sub-systems
* Work across functional teams to investigate and solve problems, including trade studies and optimization activities
* Develop automated simulation and test emulation solutions
* Support System integration testing and functional testing planning, procedures and testing activities
* Perform verification related activities in a process-oriented environment consistent with industry regulatory approval standards (Mil Standards, ARP-4754, DO-178C, SYSML). Specifically, perform verification strategy, planning, method definition, procedure development, compliance and testing
* Help raise the level of performance of the team through a collaborative team setting, consistent communication, and willingness to help others achieve success

Qualifications:
* Bachelor of Science degree in systems engineering, aerospace engineering, electrical engineering, equivalent engineering degree from an accredited institution or relevant equivalent experience.
* 5+ years systems engineering or similar relevant experience
* Demonstrated experience in system development where rigorous process and regulatory standards are required, including standards such as ARP-4754, DO-178B/C, Mil Standards
* Atlassian tools experience (JIRA, Confluence, Git)
* DOORs / DOORS NextGen tools experience
* Rational Quality Manager experience
* Matlab / Simulink experience is desired
* Proficiency in systems tools, simulation testing environments, scripting, programming and analysis (such as C++/C, Python, Java, Javascript, MagicDraw, Rhapsody, CAMEO etc…)
* Ability to deal with ambiguity, investigate and solve problems, work across multi-discipline teams, and to recommend solutions to complex system level problems
* Legal authorization to work in the U.S. is required/US Citizenship only

 
Job Number: 315591
Job Location: West Palm Beach, FL
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/24/2021
Last Updated: 01/26/2022
Firm Name: BELCAN TECHSERVICES
Attention: SumitDas
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer Generalist

Description:
A Systems Engineer job working REMOTELY from anywhere in the U.S. is currently available at Belcan. We are looking for well-rounded and dynamic Systems Engineers!  To be considered for this role, you will need a Bachelor of Science degree in the STEM field, and a minimum of five years of system and software engineering experience within the aerospace and defense (or similar highly regulated) industry. You will be working with avionics related systems in one or more of the following platforms: Spacecraft (Launch Vehicle), Satellite, Propulsion Systems, GNC systems, Electrical Power or Engine Control systems.
 
Systems Engineer Job duties:
Candidates will be involved in leading, executing and / or oversight for various systems engineering tasks including:
· System requirements definition and management - requirements decomposition (functional analysis and allocation), definition, and traceability for functional and environmental requirement
· Develop and manage interface and control data / documentation (ICD) for systems and associated sub-systems
· Work across functional teams to investigate and solve problems, including trade studies and optimization activities
· Develop automated simulation and test emulation solutions
· Support System integration testing and functional testing planning, procedures and testing activities
· Perform verification related activities in a process-oriented environment consistent with industry regulatory approval standards (Mil Standards, ARP-4754, DO-178C, SYSML).  Specifically, perform verification strategy, planning, method definition, procedure development, compliance and testing
· Help raise the level of performance of the team through a collaborative team setting, consistent communication, and willingness to help others achieve success
 
Qualifications:
· Bachelor of Science degree in systems engineering, aerospace engineering, electrical engineering, equivalent engineering degree from an accredited institution or relevant equivalent experience.
· Five to 20+ years systems engineering or similar relevant experience
· Demonstrated experience in system development where rigorous process and regulatory standards are required, including standards such as ARP-4754, DO-178B/C, Mil Standards
· DOORs / DOORS NextGen tools experience
· Matlab / Simulink or other technical computing tools experience is desired
· Proficiency in systems tools, simulation testing environments, scripting, programming and analysis (such as C++/C, Python, Java, Javascript, MagicDraw, Rhapsody, CAMEO etc…)
· Ability to deal with ambiguity, investigate and solve problems, work across multi-discipline teams, and to recommend solutions to complex system level problems
· Legal authorization to work in the U.S./US Citizenship is required
· Must be willing to travel to Windsor, CT as needed for project kick offs or quarterly meetings.
 
If you are interested in this Systems Engineer job at Belcan, please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.
 
Belcan is an equal opportunity employer.  EOE/M/F/D/V
 
Build a challenging and rewarding career with an industry leader!
 
www.BELCAN.com


 
Job Number: 315439
Job Location: REMOTE, RE
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/24/2021
Last Updated: 04/25/2022
Firm Name: BELCAN TECHSERVICES
Attention: BhargavSompalli
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer II

Description:
A Systems Engineer job in Louisville, CO is currently available through Belcan. In this role, you will be developing complex system architectures within contextual modeling platforms, ushering them from operational concept through preliminary and detailed design, simulation, and test using progressive tools. As a cross-functional engineer, you are in charge of system-level ownership of new system safety or reliability products and processes through the product lifecycle. To be considered for this role, you will have a Bachelors degree in System Engineering or a related field, and three plus years of experience of relevant experience.

Systems Engineer Job duties:
* Developing complex system architectures within contextual modeling platforms, ushering them from operational concept through preliminary and detailed design, simulation, and test using progressive tools.
* In charge of system-level ownership of new system safety.
* Develop Failure Modes and Effects Analysis as well as Reliability Analysis products.
* System Safety Engineering analysis and products including but not limited to fault tree analysis, hazard analysis, computer-based control system (CBCS) analysis, must work and must not work function analysis, etc.
* Software/ Hardware integration, including avionics and electrical distribution systems.

Qualifications:

* Bachelors of Science Degree in System Engineering or related discipline.
* Three plus years of relevant experience.
* System level design/analysis experience.
* Practical knowledge of engineering principles and practices.
* Knowledge of requirements management, functional requirements parsing, derivation, and allocation; systems design, systems integration, technical risk identification and management strategies, and Verification and Validation (V&V) principles.
* Experience with fault tree analysis tools such as CAFTA or SAPHIRE.
* Experience with requirements management and system modeling tools, such as DOORS, Rhapsody, NoMagic MATLAB.
* Understanding of Guidance Navigation, and Control hardware and software for space applications.
* Background in Aerospace and Defense Industry.
* Ability to administer baseline definition and maturation in a complex development setting, including the use of high impact trade studies and other measures.
* Exposure to establishing and tracking key Technical Performance Measurements (TPM).

Pay Rate: Up to $50/hr DOE

If you are interested in this Systems Engineer position in Louisville, CO please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.
 
Job Number: 314574
Job Location: Louisville, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/23/2021
Last Updated: 04/07/2022
Firm Name: BELCAN TECHSERVICES
Attention: FrancisOsolnick
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer IV

Description:
Inconen is looking for a Systems Engineer IV for our client, a well-known Aerospace Company, in Canoga Park, CA.

** Candidates must be U.S. Citizens without Dual Citizenship **
** Our client mandates that all employees and contractors must be fully vaccinated for COVID-19 **
** This is a Hardware Systems role, NOT Software or Electrical systems **

Duties:
-Without appreciable direction and exercising considerable latitude in determining technical objectives and approaches to assignments, performs in a largely independent role for the Systems Engineering organization.
-Typical responsibilities include: May plan, conduct, and provide technical Systems Engineering direction on projects or major phases of significant project assignment, coordinating the efforts of technical support staff in the performance of assigned projects.
-Requires the use of advanced Systems Engineering techniques in management of requirements and risk for developing rocket propulsion systems.
-Assesses the feasibility and soundness of proposed engineering evaluation tests, products or equipment when necessary data are insufficient or confirmation by testing is advisable.
-Represents the organization in conferences to resolve important questions and to plan and coordinate work.
-May direct, coordinate and review the work of a small staff of engineers and/or technicians; estimates personnel needs and schedules and assigns work to meet completion date.
-Or, as individual researcher or staff specialist may be assisted on projects by other engineers or technicians.
-Develops solutions to complex problems which require the use of ingenuity and creativity.
-Work is reviewed at extended intervals for desired results and achievement.
-Contacts include interacting with customer personnel on technical matters often requiring coordinated activity across organizational lines.

-60% - Develops hardware and software requirements for rocket propulsion systems product development. Responsible for derivation, allocation, and documentation of requirements in a requirements database. Responsible for the development and maintenance of system, subsystem, and component specifications. Coordinates requirements and related specification change management with IPT members. Defines and coordinates requirements verification plans with integrated product team members, plans and manages compliance assessment and certification.
-15% - Performs functional analysis in support of requirements development effort. Supports and/or coordinates system trade studies. Coordinates selection of optimized concept baselines through benefit/cost trades in support of definition of system architecture and objectives.
-15% - Coordinates project risk assessment and management and prepares and reports results on mitigation plans.
-10% - Communicates results in oral presentations and written communication.

Skills:
Required:
-DOORS
-DOORS NG
-DOORS requirements management
-Jazz Team Server tool knowledge
-Systems requirements management and flowdown/decomposition for subsystems and components
-Rocket hardware experience

Desired:
-Hardware requirements development for complex systems including propellant valves/electro-mechanical actuators

Keywords:
-DOORS
-Requirements Management
-Requirements Development

Education:
-Bachelor degree in Systems Engineering or appropriate discipline/science (Mechanical/Electrical/Aerospace)
-Advanced degree desirable. Coursework in Systems Engineering (requirements management, risk management, product development cycle) disciplines and rocket propulsion strongly desired.
-Trained/experienced in Microsoft Office.
 
Job Number: 16821
Job Location: Canoga Park, CA
Rate: $70.00 - $80.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 9 mos
Start Date: ASAP
Input Date: 10/26/2021
Last Updated: 11/23/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer IV (Secret Clearance)

Description:
Inconen is looking for a Systems Engineer IV for our client, a well-known Aerospace Company, in Canoga Park, CA.

** Candidates must be U.S. Citizens without Dual Citizenship **
**Our client mandates that all employees and contractors must be fully vaccinated for COVID-19**
** This is a Hardware Systems role, NOT Software or Electrical systems **
** Candidates must have an active Secret Clearance or have had an active Secret Clearance within the last two years **

Duties:
-Without appreciable direction and exercising considerable latitude in determining technical objectives and approaches to assignments, performs in a largely independent role for the Systems Engineering organization.
-Typical responsibilities include: May plan, conduct, and provide technical Systems Engineering direction on projects or major phases of significant project assignment, coordinating the efforts of technical support staff in the performance of assigned projects.
-Requires the use of advanced Systems Engineering techniques in management of requirements and risk for developing rocket propulsion systems.
-Assesses the feasibility and soundness of proposed engineering evaluation tests, products or equipment when necessary data are insufficient or confirmation by testing is advisable.
-Represents the organization in conferences to resolve important questions and to plan and coordinate work.
-May direct, coordinate and review the work of a small staff of engineers and/or technicians; estimates personnel needs and schedules and assigns work to meet completion date.
-Or, as individual researcher or staff specialist may be assisted on projects by other engineers or technicians.
-Develops solutions to complex problems which require the use of ingenuity and creativity.
-Work is reviewed at extended intervals for desired results and achievement.
-Contacts include interacting with customer personnel on technical matters often requiring coordinated activity across organizational lines.

-60% - Develops hardware and software requirements for rocket propulsion systems product development. Responsible for derivation, allocation, and documentation of requirements in a requirements database. Responsible for the development and maintenance of system, subsystem, and component specifications. Coordinates requirements and related specification change management with IPT members. Defines and coordinates requirements verification plans with integrated product team members, plans and manages compliance assessment and certification.
-15% - Performs functional analysis in support of requirements development effort. Supports and/or coordinates system trade studies. Coordinates selection of optimized concept baselines through benefit/cost trades in support of definition of system architecture and objectives.
-15% - Coordinates project risk assessment and management and prepares and reports results on mitigation plans.
-10% - Communicates results in oral presentations and written communication.

Skills:
Required:
-DOORS
-DOORS NG
-DOORS requirements management
-Jazz Team Server tool knowledge
-Systems requirements management and flowdown/decomposition for subsystems and components
-Rocket hardware experience

Desired:
-Hardware requirements development for complex systems including propellant valves/electro-mechanical actuators

Keywords:
-DOORS
-Requirements Management
-Requirements Development

Education:
-Bachelor degree in Systems Engineering or appropriate discipline/science (Mechanical/Electrical/Aerospace)
-Advanced degree desirable. Coursework in Systems Engineering (requirements management, risk management, product development cycle) disciplines and rocket propulsion strongly desired.
-Trained/experienced in Microsoft Office.
 
Job Number: 16642
Job Location: Canoga Park, CA
Rate: $70.00 - $80.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 9 mos
Start Date: ASAP
Input Date: 10/26/2021
Last Updated: 11/23/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Integration Engineer

Description:
The Systems Integration Engineer supports the design, analysis, and development, of advanced integration facilities, and application in the testing, development and certification of highly integrated complex systems.

• Design, build, and daily support and maintenance operation of advanced hardware-in-the­loop (HIL) integration test facilities, for the development of integrated complex aircraft systems.
• Development, modification and validation of aircraft simulation models.
• Supports Systems integration, safety of flight (SOF) testing, and verification testing and automation of these tests as required.
• Provide testing support along with automation and customization for facility users as needed.
• Resolves problems from development and testing activities.
• Maintains and upgrades the facility to match the testing needs and troubleshoots and resolves issues.
• Communicates with the systems design teams & systems suppliers on technical issues as required.

Unique Skills:
• Strong computer, analytical and problem-solving skills.
• Working knowledge with MATLAB/Simulink®, good Python/C coding skills, familiarity with digital/analog electrical systems.
• Experience with dSpace Control/AutomationDesk or other test automation environment desired.
• Familiarity with basic lab testing equipment such as multi-meters and oscilloscopes.
• Experience with data busses including RS-232, RS-485, ARINC-429, and Ethernet desired.
• Working knowledge of Microsoft Office Suite (Word, Excel, Lotus Notes, etc.).
• Familiarity with SW version control and problem tracking tools (PVCS/GIT/JIRA) is desired.
• Ability to communicate effectively throughout all levels of an organization.
• Ability to work independently and within a team oriented environment.

Education:
• Bachelors' degree in Electrical, Aerospace, Physics, Software engineering or other related field required at a minimum.
• Previous experience including internships and co-ops in the area of automated testing, embedded systems, including coding, requirements-based test development, design, and integration.

Physical Requirements:
• Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
• Incumbents may be required to stand, sit, squat, walk, bend, climb ladders, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
• Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
• Read, hear, speak, and see with no restrictions, as required by job duties.
• Comprehend and adhere to management directions and/or safety instructions with no restrictions.
• Effectively communicate in Business English language.
• Pull, push, carry, lift, or move items up to 10 lbs., throughout the work shift without assistance, as required by job duties.
• Pull, push, carry, lift or move materials/people/items/equipment weighing up to 501bs or more during the work shift, with the use of Company provided 'reach assistance technology' or 'movement assist technology' (fork-lifts, pallet jacks, pulleys, dolly's, robotics reach equipment, people movers etc.), as required by job duties.
 
Job Number: 28-026
Job Location: Greensboro, NC
Rate: $38-$51.00/hr
Per Diem: Yes
Overtime: Possible
Duration: 1+ Years
Start Date: ASAP
Input Date: 09/01/2021
Last Updated: 09/27/2021
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Safety Engineer

Description:
A Systems Safety Engineer job in Bellevue, WA is currently available at Belcan. This position can be worked remotely anywhere in the U.S. This is a direct, full-time position with benefits. To be considered for this role, you will need a Bachelor of Science degree in the engineering field, and a minimum of 5 years of experience within the aerospace and defense industry, preference for systems experience in the defense and space market or other highly regulated industry experience. This position requires travel.
Experience in one or more of the following platforms is preferred: Spacecraft (Launch Vehicle), Satellite, Propulsion Systems, Fault Tolerant Systems, Electrical Power or Engine Control systems.

Job duties:
Candidates will be involved in leading, executing and / or oversight for various systems engineering tasks including:
* System requirements definition and management - specifically the identification of Systems Safety related requirements in the field of airborne avionics and/or spacecraft systems
* Architecture design capture support - provide systems safety related expertise to the evolution of the structure, behavior, and more views of the system that align with the Concept of Operations (CONOPS)
* Perform Functional Hazard Assessments (FHA), Fault Tree Analysis (FTA), Failure Modes Effects & Critically Analysis (FMECA), and / or reliability analysis
* Work across functional teams to investigate and solve problems, including trade studies and optimization activities
*      Help raise the level of performance of the team through a collaborative team setting, consistent communication, and willingness to help others achieve success
* Communicate safety related issues / risks with clarity to a wide audience in multiple settings
*     Apply a broad Systems Safety background to support various activities through the system development life cycle
 
Qualifications:
*        Bachelor of Science degree in systems engineering, aerospace engineering, electrical engineering, equivalent engineering degree from an accredited institution or relevant equivalent experience.
*        5+ years systems or electrical engineering or similar relevant experience in avionics related hardware platforms
* Demonstrated experience in system safety development and regulatory approval processes where rigorous process and regulatory standards are required, including standards such as ARP-4754, DO-178B/C, DO-160 and Mil Standards
* Atlassian tools experience (JIRA, Confluence, Git)
* DOORs / DOORS NextGen tools experience
* Matlab / Simulink experience is desired
* Proficiency in systems tools, simulation testing environments, scripting, programming and analysis (such as C++/C, Python, Java, Javascript, MagicDraw, Rhapsody, CAMEO etc…)
*        Ability to deal with ambiguity, investigate and solve problems, work across multi-discipline teams, and to recommend solutions to complex system level problems
*        Legal authorization to work in the U.S. is required/US Citizenship is required

 
Job Number: 315448
Job Location: Bellevue, WA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/24/2021
Last Updated: 08/02/2022
Firm Name: BELCAN TECHSERVICES
Attention: BhargavSompalli
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Safety Engineer

Description:
A Systems Safety Engineer job in Phoenix, AZ is currently available at Belcan. This position can be worked remotely anywhere in the U.S. This is a direct, full-time position with benefits. To be considered for this role, you will need a Bachelor of Science degree in the engineering field, and a minimum of 5 years of experience within the aerospace and defense industry, preference for systems experience in the defense and space market or other highly regulated industry experience. This position requires travel.
Experience in one or more of the following platforms is preferred: Spacecraft (Launch Vehicle), Satellite, Propulsion Systems, Fault Tolerant Systems, Electrical Power or Engine Control systems.

Job duties:
Candidates will be involved in leading, executing and / or oversight for various systems engineering tasks including:
* System requirements definition and management - specifically the identification of Systems Safety related requirements in the field of airborne avionics and/or spacecraft systems
* Architecture design capture support - provide systems safety related expertise to the evolution of the structure, behavior, and more views of the system that align with the Concept of Operations (CONOPS)
* Perform Functional Hazard Assessments (FHA), Fault Tree Analysis (FTA), Failure Modes Effects & Critically Analysis (FMECA), and / or reliability analysis
* Work across functional teams to investigate and solve problems, including trade studies and optimization activities
*      Help raise the level of performance of the team through a collaborative team setting, consistent communication, and willingness to help others achieve success
* Communicate safety related issues / risks with clarity to a wide audience in multiple settings
*     Apply a broad Systems Safety background to support various activities through the system development life cycle
 
Qualifications:
*        Bachelor of Science degree in systems engineering, aerospace engineering, electrical engineering, equivalent engineering degree from an accredited institution or relevant equivalent experience.
*        5+ years systems or electrical engineering or similar relevant experience in avionics related hardware platforms
* Demonstrated experience in system safety development and regulatory approval processes where rigorous process and regulatory standards are required, including standards such as ARP-4754, DO-178B/C, DO-160 and Mil Standards
* Atlassian tools experience (JIRA, Confluence, Git)
* DOORs / DOORS NextGen tools experience
* Matlab / Simulink experience is desired
* Proficiency in systems tools, simulation testing environments, scripting, programming and analysis (such as C++/C, Python, Java, Javascript, MagicDraw, Rhapsody, CAMEO etc…)
*        Ability to deal with ambiguity, investigate and solve problems, work across multi-discipline teams, and to recommend solutions to complex system level problems
*        Legal authorization to work in the U.S. is required/US Citizenship is required

 
Job Number: 315597
Job Location: Phoenix, AZ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/24/2021
Last Updated: 12/28/2021
Firm Name: BELCAN TECHSERVICES
Attention: BhargavSompalli
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Safety Engineer

Description:
A Systems Safety Engineer job in Indianapolis, IN is currently available at Belcan. This position can be worked remotely anywhere in the U.S. This is a direct, full-time position with benefits. To be considered for this role, you will need a Bachelor of Science degree in the engineering field, and a minimum of 5 years of experience within the aerospace and defense industry, preference for systems experience in the defense and space market or other highly regulated industry experience. This position requires travel.
Experience in one or more of the following platforms is preferred: Spacecraft (Launch Vehicle), Satellite, Propulsion Systems, Fault Tolerant Systems, Electrical Power or Engine Control systems.

Job duties:
Candidates will be involved in leading, executing and / or oversight for various systems engineering tasks including:
* System requirements definition and management - specifically the identification of Systems Safety related requirements in the field of airborne avionics and/or spacecraft systems
* Architecture design capture support - provide systems safety related expertise to the evolution of the structure, behavior, and more views of the system that align with the Concept of Operations (CONOPS)
* Perform Functional Hazard Assessments (FHA), Fault Tree Analysis (FTA), Failure Modes Effects & Critically Analysis (FMECA), and / or reliability analysis
* Work across functional teams to investigate and solve problems, including trade studies and optimization activities
*      Help raise the level of performance of the team through a collaborative team setting, consistent communication, and willingness to help others achieve success
* Communicate safety related issues / risks with clarity to a wide audience in multiple settings
*     Apply a broad Systems Safety background to support various activities through the system development life cycle
 
Qualifications:
*        Bachelor of Science degree in systems engineering, aerospace engineering, electrical engineering, equivalent engineering degree from an accredited institution or relevant equivalent experience.
*        5+ years systems or electrical engineering or similar relevant experience in avionics related hardware platforms
* Demonstrated experience in system safety development and regulatory approval processes where rigorous process and regulatory standards are required, including standards such as ARP-4754, DO-178B/C, DO-160 and Mil Standards
* Atlassian tools experience (JIRA, Confluence, Git)
* DOORs / DOORS NextGen tools experience
* Matlab / Simulink experience is desired
* Proficiency in systems tools, simulation testing environments, scripting, programming and analysis (such as C++/C, Python, Java, Javascript, MagicDraw, Rhapsody, CAMEO etc…)
*        Ability to deal with ambiguity, investigate and solve problems, work across multi-discipline teams, and to recommend solutions to complex system level problems
*        Legal authorization to work in the U.S. is required/US Citizenship is required

 
Job Number: 315596
Job Location: Indianapolis, IN
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/24/2021
Last Updated: 01/26/2022
Firm Name: BELCAN TECHSERVICES
Attention: BhargavSompalli
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Safety Engineer - Launch Vehicle / WA State

Description:
Job Description :
As part of a small team, you will develop and manage system safety products for the first stage Launch Vehicle. You will support system engineering practices across disciplines to develop, allocate, manage, and verify requirements and interfaces. You will work across subsystems and support integrated solutions to achieve our vision of 'millions of people living and working in space.
Responsibilities:
Support launch vehicle project leads by carrying out systems engineering activities in accordance with companies standards and practices, engaging in tailoring required processes to complete tasks assigned including:
Perform system safety analysis and generate system safety deliverables including: Functional Hazard Assessments (FHAs), Fault Tree Analyses (FTAs), Failure Mode, Effects, and Criticality Analyses (FMECAs), Common Cause Assessments (CCAs)
Work with systems engineers and subsystem responsible engineers to identify and verify compliance with system safety requirements
Develop requirement verification plans and strategies to complete verification of requirements
Requirements authoring, decomposition, and traceability
Develop and mature Concept of Operations
Author and maintain interface control documents between subsystems
Implement system safety processes and identify continuous improvement opportunities
Participate in actively maintaining a healthy system safety culture
Mandatory:
•Minimum of a B.S. degree in Mechanical, Electrical, or Aerospace engineering or other technical field •5+ years systems engineering experience with system safety or reliability engineering experience performing FHAs, FMEAs/FMECAs, FTAs, and CCAs •Strong system safety and mission assurance fundamentals •System mindset and aptitude •Excellent written and verbal communication skills, organizational skills •Ability to work effectively in teams as well as lead teams •Demonstrated configuration management experience
Desired Skills:
•7+ years aerospace systems engineering experience with 3+ years system safety or reliability engineering experience performing FHAs, FMEAs/FMECAs, FTAs, and CCAs •Experience with systems engineering tools such as IBM DOORS Next Gen (DNG) Requirements Management (RM) and Rational Quality Manager (QM) •Experience with PTC Quality Solutions •Experience using PTC Creo and Windchill •Experience with Atlassian toolset collaboration tools such as Confluence and JIRA •Experience with a variety of complex aerospace or launch vehicle systems •System integration experience, preferably with aerospace hardware •Knowledge of current systems engineering processes and methodologies •Experience performing system safety compliance assessments against the following external standards: Range Safety, NASA, FAA, MIL-STD-882, or ARP-4761.
 
Job Number: WA3648
Job Location: Renton WA
Input Date: 09/10/2021
Last Updated: 10/31/2022
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic Avellino
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Safety Engineer III

Description:
A Systems Safety Engineer III job in Louisville, CO is currently available through Belcan. In this role, you will be responsible for researching, architecting, modeling, simulating, testing, certifying and improving cutting edge products and services. To be considered for this role, you will have a Bachelor's degree in Systems Engineering or a related discipline and typically 3 years or more of relevant experience.

Systems Safety Engineer III Job duties:

* Research, architect, model, simulate, test, certify and improve cutting edge products and services.
* Work closely with design partners, developing complex system architectures within contextual modeling platforms, ushering them from operational concept through preliminary and detailed design, simulation, and test using progressive tools.
* In charge of system-level ownership of new system safety or reliability products and processes through the product lifecycle.

Qualifications:

* Knowledge of requirements management, functional requirements parsing, derivation, and allocation; systems design, systems integration, technical risk identification and management strategies, and Verification and Validation (V&V) principles.
* Experience in developing Failure Modes and Effects Analysis as well as Reliability Analysis products.
* Experience in or knowledge of System Safety Engineering analysis and products, including but not limited to fault tree analysis, hazard analysis, computer based control system (CBCS) analysis, must work and must not work function analysis, etc.
* Experience with software/hardware integration, including avionics and electrical distribution systems.

Pay Range: $37/hr to $50.87/hr

If you are interested in this Systems Safety Engineer III position in Louisville, CO please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.


 
Job Number: 314379
Job Location: Louisville, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 07/17/2021
Last Updated: 11/08/2021
Firm Name: BELCAN TECHSERVICES
Attention: Dee AnnVan Schaick
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Talent Acquisition Manager

Description:
We are seeking a Talent Acquisition Manager to assist with account maintenance/management for one of the largest aircraft manufacturers in the world.
Experience with account maintenance, interacting with hiring managers, recruiting aerospace professionals.
10+ years of experience in recruiting/account management in the aerospace industry a MUST.

Executes recruiting efforts (e.g., talent sourcing, candidate evaluation/screening, interview process, offer negotiations and new hiring on-boarding, etc). Develops short and long-term recruiting strategies. Evaluates and recommends job postings. Conducts research on recruitment standards and monitors new trends and opportunities. Performs screening and interviews of qualified candidates. Leverage online recruiting resources, tools, and systems to identify and recruit the best candidates. Plans and supports recruiting events. Develops recruiting and sourcing strategies. Partners with hiring organizations across multiple disciplines. Sources external resume databases for diverse and qualified candidates.

The Structures Company LLC is an AA/EOE.
 
Job Location: Seal Beach, CA
Rate: Depending on Experience
Per Diem: No
Overtime: No
Duration: Permanent
Start Date: ASAP
Input Date: 06/29/2021
Last Updated: 09/15/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Recruiter

Description:
The Technical Recruiter will be responsible for ensuring the delivery of talent acquisition services for the aerospace industry or other assigned business units. You will be responsible for sourcing and qualifying candidates against complex technical positions. You will act as the primary point of contact for candidates in managing their experience through the recruiting process. You will also act as liaison between hiring managers and other functions within the company to coordinate interviews, conduct compensation negotiations, and coordinate onboarding activities. You will be responsible for interacting with business leaders to collaborate on requisition qualification and determining search strategies.

Qualifications:

A minimum of five years of technical recruiting experience in is required, two of which must be focused in the aerospace or embedded software industry
Recruiting experience must include sourcing, requisition management, candidate management, negotiation, and onboarding
Must have a minimum of two years experience working closely with managers and stakeholder managing relationships, expectations, and influencing talent acquisition decisions
Requires a background working in an OFCCP compliant environment
This position requires demonstrated experience in providing written and verbal communication of complex data analysis to business leaders

Preferred skills:

Experience with Workday Recruiting
Excellent verbal and written communication skills
Bachelor's degree in Human Resources, Business Administration, or related field.


Cyient is an Equal Opportunity/Affirmative Action Employer. We consider applicants without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender, gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, or membership in any other group protected by federal, state or local law.
 
Job Number: JR-025915
Job Location: Arlington, TX
Duration: Permanent Full-Time
Input Date: 09/08/2021
Firm Name: CYIENT
Attention: Chris Hix
Address: 1401 NOLAN RYAN EXPY
City, State: ARLINGTON, TX 76011
Website: www.cyient.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Writer (Aerospace)

Description:
JOB DESCRIPTION
Reviews work in progress, disputes and discrepancies. Gathers input and reconciles conflicting comments. Writes, edits and proofreads technical, proposal and promotional text and artwork. Verifies consistency and clarity of communication. Defines scope of project, negotiates agreement and monitors status. Develops concepts and proposals for new content management. Negotiates approaches to content structure and design. Determines content requirement for regulatory treatment, coordination or approval.

OTHER
- Roles are hybrid (onsite and remote but NEED to be local to Mesa
 
Job Number: 46891-1
Job Location: AZ
Rate: open (DOE)
Per Diem: Yes
Overtime: Yes
Duration: 12 months+
Start Date: ASAP
Input Date: 08/23/2021
Last Updated: 01/26/2023
Firm Name: STRUCTURES COMPANY LLC
Attention: Garrett Smart
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Engineer

Description:
A Test Engineer job in Austin, TX is currently available through Belcan. This is a Direct Hire role. The ideal candidate will thrive in a fast-paced role, have a Bachelors degree in Engineering or a related field and at least three years of experience in the assembly and testing of complex electro-mechanical systems and turbine engines in the aerospace, defense, or engineering. NO SPONSORSHIP PROVIDED-Must be a US Citizen

Test Engineer job duties:
* Define and maintain test procedures for Actuation & Turbine product lines
* Execute testing and validation/qualification of products per the defined procedures
* Support the planning and implementation of an AS9100 quality management system
* Collaborate with applicable engineers to define acceptance criteria and limits
* Create and maintain appropriate documentation including, but not limited to: traceability materials/certifications, workflows, and quality records
* Improve and streamline existing assembly processes
* Lead and/or participate in troubleshooting and root-cause analysis of quality events; support process owners in the planning and implementation of corrective measures
* Lead and/or support negotiations with customers concerning quality demand fulfillment(s) and/or resolution of quality deficiencies including preparing external customer documentation.

Qualifications:
* Bachelors degree in Engineering or a related field from an accredited college or university
* Minimum three years of experience in test engineering, operations, or manufacturing
* Minimum 1-2 years of experience in the assembly and testing of complex electro-mechanical assemblies in a production or prototype environment in the aerospace, defense, or engineering fields, ideally with turbine experience
* Prior experience working in an aerospace quality control (AS9100) and manufacturing environment, preferred
* Prior experience with project management, documentation practices, and turbine engines preferred
* Proficient level of working mechanical and electrical knowledge
* Occasional travel required
* Must be a US Citizen-NO SPONSORSHIP AVAILABLE

If you are interested in this Test Engineer job in Austin, TX, please apply via the 'apply now' link provided. Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.

 
Job Number: 315258
Job Location: Austin, TX
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/13/2021
Last Updated: 11/04/2021
Firm Name: BELCAN TECHSERVICES
Attention: ScottWatkins
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Engineer II

Description:
A Test Engineer II job in Louisville, CO is currently available through Belcan. In this role, you will be responsible for using your skills and expertise to simulate, test, certify and improve cutting edge products and services. To be considered for this role, you will have a Bachelor's degree in Engineering or other related discipline, plus 3 or more years of relevant experience. A background in Aerospace and/or Defense is beneficial. The ability to obtain and maintain a DOD Security Clearance may be required.

Test Engineer II Job duties:

* Simulate, test, certify and improve cutting edge products and services.
* Develop complex test plans and procedures for a variety of systems to ensure the verification and validation of all product requirements.
* Be involved with the execution of the tests using top industry tools.
* Test system and component level new products and develop new test processes throughout the product lifecycle.


Qualifications:

* Familiarity working in multi-disciplinary design and development teams.
* Exposure to planning, conducting and documenting Verification and Validation (V&V) activities.
* Experience with various testing equipment, standards, and methodologies to include manual and automated testing.
* Ability to read schematics, use service manuals, follow test procedures, and use logical trouble shooting techniques.

If you are interested in this Test Engineer II position in Louisville, CO please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.

 
Job Number: 313353
Job Location: Louisville, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 06/11/2021
Last Updated: 09/20/2021
Firm Name: BELCAN TECHSERVICES
Attention: FrancisOsolnick
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Thermal Analysis Engineer

Description:
A Thermal Analysis Engineer job is currently available at Belcan in Marietta, GA. To be considered for this role you will need an Active Secret Clearance. In this role, you will be part of the team responsible for developing and analyzing complex thermal management system architectures and structural temperatures for next generation air vehicle platforms.
Responsibilities:
* Sizing and performance modeling of complex structures, performing trade studies, developing/refining required analysis and data reduction tools.
* Document and present work to internal and external customers.
* Provide technical direction at junior engineers.

Requirements for the role include:
* US Citizen with Secret Clearance and Special Access Requirements
* Aerospace or Mechanical Engineering degree with at least 6 years of experience
* Experience with thermodynamics, conduction, convection, and radiation heat transfer
* TMS experience
* Finite element modeling, thermal analysis, CFD, and subsystem analysis tool capabilities
* Leadership and mentoring experience
* Excellent written and oral communication skills
* Strong working knowledge with Matlab/Simulink and high level programing language(s) (C, C++, Fortran, etc)
* Experience with advanced engineering packages (Patran, Sinda, Thermal Desktop) and CAD packages is desired
* Experience working in a team environment

If you are interested in this Thermal Analysis Engineer job, please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.

Belcan is an equal opportunity employer. EOE/M/F/D/V

Build a challenging and rewarding career with an industry leader!

http://belcan.com/

 
Job Number: 315083
Job Location: Marietta, GA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/10/2021
Last Updated: 04/05/2022
Firm Name: BELCAN TECHSERVICES
Attention: WilliamFord
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Thermal Analysis Engineer

Description:
A Thermal Analysis Engineer job is currently available at Belcan in Fort Worth, TX. To be considered for this role you will need an Active Secret Clearance. In this role, you will be part of the team responsible for developing and analyzing complex thermal management system architectures and structural temperatures for next generation air vehicle platforms.
Responsibilities:
* Sizing and performance modeling of complex structures, performing trade studies, developing/refining required analysis and data reduction tools.
* Document and present work to internal and external customers.
* Provide technical direction at junior engineers.

Requirements for the role include:
* US Citizen with Secret Clearance and Special Access Requirements
* Aerospace or Mechanical Engineering degree with at least 6 years of experience
* Experience with thermodynamics, conduction, convection, and radiation heat transfer
* TMS experience
* Finite element modeling, thermal analysis, CFD, and subsystem analysis tool capabilities
* Leadership and mentoring experience
* Excellent written and oral communication skills
* Strong working knowledge with Matlab/Simulink and high level programing language(s) (C, C++, Fortran, etc)
* Experience with advanced engineering packages (Patran, Sinda, Thermal Desktop) and CAD packages is desired
* Experience working in a team environment

If you are interested in this Thermal Analysis Engineer job, please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.

Belcan is an equal opportunity employer. EOE/M/F/D/V

Build a challenging and rewarding career with an industry leader!

http://belcan.com/

 
Job Number: 315081
Job Location: Fort Worth, TX
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/10/2021
Last Updated: 04/05/2022
Firm Name: BELCAN TECHSERVICES
Attention: WilliamFord
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Thermal Analysis Engineer

Description:
A Thermal Analysis Engineer job is currently available at Belcan in Palmdale, CA. To be considered for this role you will need an Active Secret Clearance. In this role, you will be part of the team responsible for developing and analyzing complex thermal management system architectures and structural temperatures for next generation air vehicle platforms.
Responsibilities:
* Sizing and performance modeling of complex structures, performing trade studies, developing/refining required analysis and data reduction tools.
* Document and present work to internal and external customers.
* Provide technical direction at junior engineers.

Requirements for the role include:
* US Citizen with Secret Clearance and Special Access Requirements
* Aerospace or Mechanical Engineering degree with at least 6 years of experience
* Experience with thermodynamics, conduction, convection, and radiation heat transfer
* TMS experience
* Finite element modeling, thermal analysis, CFD, and subsystem analysis tool capabilities
* Leadership and mentoring experience
* Excellent written and oral communication skills
* Strong working knowledge with Matlab/Simulink and high level programing language(s) (C, C++, Fortran, etc)
* Experience with advanced engineering packages (Patran, Sinda, Thermal Desktop) and CAD packages is desired
* Experience working in a team environment

If you are interested in this Thermal Analysis Engineer job, please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.

Belcan is an equal opportunity employer. EOE/M/F/D/V

Build a challenging and rewarding career with an industry leader!

http://belcan.com/

 
Job Number: 315082
Job Location: Palmdale, CA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 08/10/2021
Last Updated: 04/05/2022
Firm Name: BELCAN TECHSERVICES
Attention: WilliamFord
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design Engineer

Description:
A Tool Design Engineer role located in Salt Lake City, Utah is currently available through Belcan. The Tool Design Engineer will create production and development tooling for advanced composite structures and complex aerospace assemblies. You will work cooperatively with design and manufacturing engineering as well as operations to create and optimize the tool string for quality, cost and throughput. The tool engineer designs the tooling or communicates the tool requirements to suppliers through a Statement of Work and associated supporting data (e.g. CAD models, sketches, simulations, etc.). This engineer leads project tracking to ensure timely tooling design, fabrication, on-boarding and implementation.

Tool Design Engineer job duties:

* Designs development and production tooling for composite layup, ATL, RTM, machining and
assemblies using part design models/specifications and fabrication methods.
* Creates tool statements of work for outside suppliers using part models and tool specifications
including tool design recommendations.
* Works cooperatively and effectively with operations, design and manufacturing engineering,
project engineers, quality engineers and suppliers to optimize tools for ease of product
manufacturing, cost, and quality.
* Creates accurate 3D models, drawings and engineering data (BOM's, tool inspection packages,
preventative maintenance requirements) required to communicate designs to suppliers,
operations and the customer.
* Works with supply chain to procure tooling packages.
* Maintains traceability for all tooling activities or events related to tool procurement and
maintenance.
* Manages and dispositions tooling discrepancies, damage and tooling related production issues.
* Communicates and coordinates required approvals through the customer.
* Develops and implements tooling changes with the Integrated Product Team.
* Actively participates in initial production to prevent and/or solve any tooling issues.
* Analyzes root cause and recommends corrective actions.
* Primary point of contact for customer and supplier for tooling technical issues.
* Works under general direction only and independently determines and develops tooling
solutions.
* Assists with translating for any power supply/transformer assemblers when needed/possible.

EDUCATION AND EXPERIENCE REQUIRED

* BS/BA in Degree in Mechanical Engineering, Aerospace Engineering or Equivalent (AE/CE/IE)
* Minimum 5+ years of hands on experience in design and procurement of production tooling for
complex composite aerospace layup, ATL, RTM, machining and assemblies in an aerospace team
environment.
* Experience in tool design for manufacturing by engaging design engineering, manufacturing
engineering, operations, and suppliers.
* GD&T for tooling.
* Experience in clearly communicating project requirements, design concepts and project status
both verbally and written (Microsoft Office).
* 5+ years' experience with 3D CAD tools (CATIA V5) for design and associated PDM systems.
* Prefer PTC Windchill, Enovia and LCA experience.
* Working knowledge of other related disciplines such as assembly, machining, welding, and
composite processes.
* Demonstrated history of creative problem solving in a team environment.
* Willingness to perform 'hands-on' work in a dynamic setting.
* Ability to manage and work to provided schedules and deadlines.
* Customer and operations focused.
* Results driven with attention to detail.
* Good written and oral communication.
* Self-motivated and engaged learner.
* Efficient and organized with task management.

If you are interested in this Tool Design Engineer role located in Salt Lake City, Utah please apply via the 'apply now' link provided.

Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.



 
Job Number: 315626
Job Location: Salt Lake City, UT
Rate: --
Per Diem: --
Overtime: --
Duration: JOB-CONTRACT_TYPE
Start Date: --
Input Date: 08/24/2021
Last Updated: 09/27/2021
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Designer

Description:
Investigates, creates and reviews equipment and tooling concepts, designs and datasets, and organizes, manages and maintains drawings of record and applies configuration management tools. Participates in product design reviews and researches the application of robotics, automation and new technology to support the build plan and establish technical requirements for producibility. Develops statements of work with validated specifications, requirements, and functions and prepares design or fabrication off load packages. Develops, documents and maintains equipment and tooling inspection, maintenance and spares requirements and trains personnel as needed. Researches designs to create and revise usage instructions. Provides technical support for engineering changes and discrepancies by investigating problems, and analyzing data to identify solutions. Conducts studies to determine current condition and make recommendation for disposition of the equipment and tooling. Restriction: In locations where SPEEA representation applies, this job family will be covered by the terms of the collective bargaining agreement.
Leads the development of highly complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements. Leads design reviews, design requirement collection, drawing creation and revision. Researches the application of robotics, automation and new technology to support the build plan. Creates off-load packages, specifications, purchase requests and usage instructions for equipment and tooling. Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Establishes and validates spares requirements. Leads the implementation of best practices into functional process documentation to drive standard work. Oversees the development and documentation of equipment and tooling inspection and usage instructions, preventative maintenance plans, and user training. Provides technical direction to support engineering changes and discrepancy resolution. Oversees the maintenance of hardware and software configuration. Assesses and makes recommendations for disposition of equipment and tooling.
 
Job Number: Tool_AZ
Job Location: Mesa, AZ
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6 Months
Start Date: ASAP
Input Date: 09/09/2021
Firm Name: INNOVA SOLUTIONS, INC
Attention: Shailendra Mishra
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Designer - SC

Description:
Tool Designer
Location: Charleston, SC
Hourly Rate: $47.00 - $52.00
Duration: 12 months, possible extension
Benefits: Per Diem available, overtime possible, medical, dental, 401K
** Must be U.S. Person for purposes of Export Compliance.**

Required Education and Experience:
• High School Diploma or GED plus 3 or more years’ experience in tool design in the aerospace industry utilizing Catia V5.
• Knowledge of computer aided design tools and systems (e.g., computer aided design/computer aided manufacturing (CAD/CAM), computer aided three dimensional interactive (CATIA), Mentor Graphics, Unigraphics). Able to manipulate data sets, (e.g., compare CATIA to measurement data, create stereo lithography files).

Tasks and Responsibilities:
Investigates and develops complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements. Participates in design reviews, collects design requirements, creates and revises drawings and models, researches the application of robotics, automation and new technology to support the build plan. Creates off-load packages, specifications, purchase requests and usage instructions for equipment and tooling. Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Develops and documents equipment and tooling inspection and usage instructions, preventative maintenance plans, and user training. Provides technical support for engineering changes and discrepancies by investigating problems and analyzing data to identify solutions. Maintains hardware and software configuration. Assesses and makes recommendations for disposition of equipment and tooling.

Reference Number: VEVBA
 
Job Number: 59699
Job Location: Charleston, SC
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 12 months
Start Date: ASAP
Input Date: 09/01/2021
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Erica Price
Address: 4010 WATSON PLAZA DR STE 138
City, State: LAKEWOOD, CA 90712
800 Phone: 866/277-3343
Fax Phone: 562/420-7688
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Designer 3

Description:
Tool Designer 3

Location: North Charleston, SC
Duration: 12 Months

Description:
Investigates and develops complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements. Participates in design reviews, collects design requirements, creates and revises drawings and models, researches the application of robotics, automation and new technology to support the build plan. Creates off-load packages, specifications, purchase requests and usage instructions for equipment and tooling. Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Develops and documents equipment and tooling inspection and usage instructions, preventative maintenance plans, and user training. Provides technical support for engineering changes and discrepancies by investigating problems and analyzing data to identify solutions. Maintains hardware and software configuration. Assesses and makes recommendations for disposition of equipment and tooling.

Basic Qualifications (Required):
- Education/experience typically acquired through advanced education (e.g. Associate) and typically 3 or more years' related work experience or an equivalent combination of education and experience (e.g. Bachelor+1 years' related work experience, 5 years' related work experience, etc

- Computer Aided Design Tools
Knowledge of computer aided design tools and systems (e.g., computer aided design/computer aided manufacturing (CAD/CAM), computer aided three dimensional interactive (CATIA), Mentor Graphics, Unigraphics). Able to manipulate data sets, (e.g., compare CATIA to measurement data, create stereo lithography files).

Skill Set:
- Ability to work with a team
- Ability to use Velocity and Redars
- Experience in Shipside and Technical support
- Ability to interpret specifications

Skill Code: 66W-Tech Designer
 
Job Number: 21-22574
Job Location: North Charleston, SC
Per Diem: split
Overtime: possible
Duration: 12 months
Start Date: 9/24/2021
Input Date: 09/01/2021
Last Updated: 09/10/2021
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 859 STEPHENSON HWY
City, State: TROY, MI 48083
Phone: 843/955-9221
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Engineer - SC

Description:
Tool Engineer
Location: Charleston, SC
Hourly Rate: $53.00 - $58.00
Duration: 12 months, possible extension
Benefits: Per Diem available, overtime possible, medical, dental, 401K
** Must be U.S. Person for purposes of Export Compliance.**

Required Education and Experience:
• Bachelors’ degree in Engineering plus 5 or more years’ experience in tool design and engineering in the aerospace industry utilizing Catia V5.
Assembly Process:
• Knowledge of assembly and production processes, manufacturing capabilities (e.g., composites, structures), and data needed for defining delivery configurations (e.g., design definition, program directives, engineering drawings, change memos, wiring diagrams and schematics, functional tests, supplier data). Ability to differentiate production (manufacturing) processes and requirements from in-service procedures and requirements.
Computer Aided Design Tools
• Knowledge of computer aided design tools and systems (e.g., computer aided design/computer aided manufacturing (CAD/CAM), computer aided three dimensional interactive (CATIA), Mentor Graphics, Unigraphics). Able to manipulate data sets, (e.g., compare CATIA to measurement data, create stereo lithography files).

Tasks and Responsibilities:
Evaluates program and project requirements, develops complex equipment and tooling concepts and designs solutions for the Production System. Compiles and analyzes technical data to determine the effects on product engineering design and rate estimates, identifies robotics, automation or technology recommendations and system integration for equipment and tooling. Ensures compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Validates contractual performance milestones, maintains configuration control, conducts reviews, prepares plans for productions readiness, preventative maintenance, and spares. Conducts training for Production and Maintenance personnel. Develops and implements work-arounds and maintains configuration of hardware, software and documentation. Performs studies and make recommendation for disposition of assets.

Reference Number: VEVBA
 
Job Number: 59698
Job Location: Charleston, SC
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 12 months
Start Date: ASAP
Input Date: 09/01/2021
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Erica Price
Address: 4010 WATSON PLAZA DR STE 138
City, State: LAKEWOOD, CA 90712
800 Phone: 866/277-3343
Fax Phone: 562/420-7688
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Zuken E3 Librarian

Description:
Zuken E3 Librarian

Location: Remote

Job ID: #62168



Components librarian will support the creation of library parts for military electrical harness components. Will also be responsible for the repair/organizing/updating of existing or imported Zuken E3 library structures and components for various part types including connectors, back shells, cables, wires. This includes updating product manufacturing information and design and model attributes per industry standards.



• Desire candidate must have strong knowledge of Zuken E3 or a strong willingness to learn.

• Knowledge of harness and other electromechanical components like connectors, back shells, cables, wires, etc.

• A strong preference for mil?spec parts familiarity.

• Ability to communicate issues with Zuken application engineers.

• Good communication skills with internal customers as a service provider.

• Some familiarity with Creo is preferred.

• Detail oriented personality a plus.

• Excellent process development and documentation skills. (MS Office).



____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 62168
Job Location: Remote, Remote
Per Diem: Possible
Start Date: ASAP
Input Date: 09/14/2021
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: David Surreira
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

Back to Advanced Job Search