Job Search Results

936 listings were found that matched your search words: Keywords: Mechanical ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2018/05/27 Sunday 04:21PM Pacific Time by ContractJobHunter. )

Listings 1 - 936

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
116971 - Manufacturing Engineer I

Description:
*Perform technical studies and conduct analysis of operations.
*Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility.
*Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
*Author DRDI/DMT rework instructions to support effective corrective actions.
*Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
*Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
*Perform productivity studies from engineering drawings.
*Apply statistical methods to estimate future manufacturing requirements and potential
*Incorporate Lean Manufacturing Methodology into existing and future processes.

Requirements
*Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
*Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
*Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc.
*Lean Specialist certification or higher preferred.
 
Job Number: 126755
Job Location: Savannah, GA
Input Date: 10/24/2017
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

1st Shift

Description:
Perform maintenance in support of manufacturing facility on a variety of equipment throughout facility including machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment.  Responsible for monitoring hazardous waste for removal, maintenance of chemical storage area and clean up of chemical spills as required.  Nontoxic or non-hazardous.  Mainly Soap and/or grease
Will be operating a crane or fork lift.
 
Responsibilities:
Provide maintenance support in all areas of manufacturing facility including but not limited to machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment such as hand tools, welding equipment, fork lifts, and precision measuring equipment.  Maintain and develop preventative maintenance program for production related equipment.  Required to perform work in compliance to all safety and EHS policies and procedures. 
 
Qualifications:
  • Knowledge of EHS procedures and policies
  • Knowledge and safe use of production related equipment
  • Working knowledge and use of welding, electrical, and plumbing equipment including repair and maintenance of machinery
  • Millwright Skills and familiar with Electrical and/or Hydraulic
  • Able to interpret OEM handbooks and/or plant diagrams
  • Understanding of reading building plans and electrical schematics
  • Ability to use trouble-shooting and precision measuring equipment
  • Where applicable, trained in maintenance processes such as but not limited to welding, plumbing, electrical and mechanical troubleshooting
  • Vocational or technical training in a maintenance related discipline, strongly preferred

 
Training requirements:

  • Demonstrated ability to comply to maintenance safety procedures such as lock-out tags, etc.
  • Demonstrate ability to safely complete job tasks utilizing manual equipment as well as use of gauges needed for repair fabrication
  • Demonstrate ability to perform preventative maintenance, and repair of facilities equipment
  • Where applicable, complete safety and maintenance training and or certification

 
 
 
 
 

 
Job Number: 1610061453
Job Location: Las Vegas, NV
Duration: 12 months
Input Date: 05/25/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002G2BqAAK&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2239 - CABINET DESIGNER - cv. word doc only

Description:
Act as a specialist in a specific system/monument.

Define technical specifications, mechanical/electrical interfaces, design, integrate, certify, test and troubleshoot the above described systems.

Organize and attend design reviews taking into consideration industry regulations, Client Design Practices and requirements.

Be in direct contact with suppliers and responsible for the delivery of quality engineering documentation that meets Client Standards.

Research, design and evaluate new technical concepts or emerging technologies. (Trade Shows, Air Shows, technical exhibitions, etc).

Procure parts and supply instructions drawings to employees to build mock-ups/prototype.

Provide definition engineering in relation with new designs.

Support the creation of Interface Control Drawings (ICD).

Report status, identify and mitigate roadblocks.

Point of contact on a technical level for designers.

Accountable for engineering deliverables and milestones for a group of monuments.

Bachelor's degree in Mechanical Engineering with 5 to 8 year experience.

Knowledgeable in 3D design with CATIA V5.

Organized and project oriented.

Must be bilingual and have good communication skills including good English and French writing and verbal skills.

Are a team player, working in a multidisciplinary team.

Customer-oriented with innovative problem solving skills and you are organized.

Autonomous, flexible and oriented toward result via your project management skill.

Experience and have lead a small group of designers or equivalent.

Have design experience in cabinet assembly design and/or cabinet installation.
 
Job Number: 2239
Job Location: Montreal, Canada
Rate: 54.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 24 Mths
Start Date: ASAP
Input Date: 10/20/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2243 - PNEUMATICS SPECIALIST - cv. word doc only

Description:
Influence the definition of New Aircraft Development Projects within Product Development Engineering as well as supporting Sustaining Programs.

Provide Technical expertise to the Engineering teams, including Strategic Technology and Advanced Design.

Provide direction about Industry trends and identify company needs within the discipline.

Lead or support the Pneumatics Knowledge domain roll-out and knowledge capture & sharing.

Identify, develop and execute development opportunities for discipline members .

Lead or support Systems integration aspects in product development.

Have a Bachelor degree in Mechanical/Aerospace engineering.

Have more than 15 years of engineering experience in the field of Aerospace Pneumatic Systems.

Demonstrate good working knowledge of FAA, EASA, TCCA certification requirements (regulatory Authority delegation is an asset).

Are recognized within the industry for your expertise in Pneumatics.

Have proven leadership skills, work collaboratively in a team environment and possess excellent interpersonal and problem solving skills.

Possess good written and oral communication skills in English. (Knowledge of French is an asset).

Are available to travel on short term assignments as required.

Are proficient with most-used office programs, e.g. MS Word, Excel and Powerpoint.
 
Job Number: 2243
Job Location: Montreal, Canada
Rate: 64.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 10/20/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2244 - FLIGHT DYNAMICS ENGINEER - cv. word doc only

Description:
Conduct aircraft Stability & Control analyses using in-house software.

Support the development and modifications to dynamic flight simulation models.

Perform analyses and write reports that demonstrate aircraft compliance to airworthiness regulations.

Keep abreast of advances in the state of the art and in Regulatory Requirements.

Interface with other internal disciplines and external partners/suppliers to ensure efficient data-flow and decision-making.

Prepare Technical Reports, Test Plans, Requirements Documents, Work Statements and Cost Estimates.

Involve data- and information-exchange with in-house disciplines such as Weights, Flight Controls, Customer Engineering, Airworthiness, Systems, Testing, Production and In-Service Support.

Participate in the planning and execution of flight tests.

Participate in the planning and execution of wind tunnel tests.

Develop, use and maintain in-house software and methods.

Provide support to production and production flight-test for aerodynamic and aircraft handling related issues and non-conformances.

Have a Bachelor%u2019s or Master%u2019s degree in Aerospace or Mechanical Engineering from an accredited university.

Have at least two to five (2-5) years of specialization in aircraft flight dynamics, aerodynamics, stability and control, aircraft handling, and flight simulation.

Have experience with dynamic flight simulations using commercial codes such as MATLAB/Simulink or MatrixX.

Have previous experience with FORTRAN and/or C and/or C++ programming, and the UNIX operating system is an asset.

Have a basic understanding of aerodynamics, aeroelasticity, and aircraft design.

Have a basic understanding of aircraft structures/systems and familiarity with airworthiness regulations.

Proficiency in preparing technical reports and presentations via office-software is a pre-requisite.

This position is a intermediate level in Flight Characteristics.
 
Job Number: 2244
Job Location: Toronto, Canada
Rate: 56.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2254- RM & SAFETY ENGINEER - cv. word doc only

Description:
Prepare reliability & safety studies, Failure Modes and Effects Analysis (FMEA), Aircraft Functional Hazard Analysis, Fault Tree Analysis and System Safety Analysis to certify modifications to the Client aircraft systems.

Participate in internal and external Design Reviews with Partners/Suppliers.

Responsible for reviewing Partner's/Supplier's reports and ensure reliability & safety requirements are met.

Interface with various (Design Authorized Delegate) DAD disciplines Systems Engineering, Flight Sciences as part of the Integrated Design Team.

Interface with other internal and external customers (e.g. Airworthiness, Product Support, Marketing, Partners, and Certification Authorities).

Will be involved with the maintenance engineering group to evaluate potential changes to certified maintenance tasks in conjunction with the DAD.

Evaluate potential modification/creation of Master Minimum Equipment List (MMEL) items with Transport Canada Civil Aviation (TCCA) and Federal Aviation Administration (FAA).

Prepare & present risk assessments for continued airworthiness queries.

Bachelor's degree in engineering, with at least fifteen (15) years of experience in the field of aircraft reliability/safety and in particular the following:

Creating and reviewing System safety assessments that meet the requirements of ARP4761.

Experience in evaluating in-service issues which are subject to safety.

Review and propose different certified maintenance task intervals for previously certified systems.

Experience with Continued Airworthiness Risk Assessments (CAA).

Experience in creating and proposing changes to the MMEL for TCCA and FAA.

Have experience in applied aerospace reliability engineering for mechanical and electrical components including reliability prediction.

Have completed various types of aircraft level assessments such as Particular risk analysis (rotor burst, tire burst) and zonal analysis.

Experience with ARP4754 is considered an asset

Must be familiar with common reliability and safety processes and tools to perform the above mentioned tasks (e.g. Reliasoft, CAFTA.)
 
Job Number: 2254
Job Location: Toronto, Canada
Rate: 63.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 11/22/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2256 - STRESS ENGINEER - COMPLETION - cv in word doc please

Description:
First point of contact for Client and Supplier Integration team

Prepares Kickoff package needed for Outsource supplier to be able to start design work.

Assists Supplier in technical solutions.

Has an Overview and general understanding of the monument including sub systems.

Coaches and Assist Supplier in understanding and following Client processes and best practices.

Highlights opportunities to improve the product/process (ex: weight reduction, DDP strategy, etc)

Reviews engineering packages to ensure that nothing is missed.

Participates in scheduling of deliverables and works with Project team to ensure that deliverable dates are meet.

Communicates Milestone readiness (3DDR model freeze, CDR exits etc).

Support Weekly Quality Meetings presenting Quality KPI to calibrate Quality

Attends IPDT weekly Meetings.

Participates and supports in Design RFCs raised by HCL and Production RFCs raised by Liaison

Must have a bachelor's degree in Mechanical Engineering or a DEC in Aeronautics or Mechanical Engineering with at least fifteen (15) years of relevant Stress experience.

Knowledge of Catia V5 is required with a minimum of five (5) to seven (7) years of Catia design experience.

Must have a minimum of 5 years MRB experience.

Relevant technical experience in interior completion is required.

Have relevant technical experience in interior completion on Client Platform and knowledge of certification requirements, Aircraft systems and interiors.

Must have experience in stress analysis and FEM and experience in at least one of the following skills in the structural integrity qualification (loads, fatigue and damage tolerance) of airplane primary structural components.

Must have a good command of various softwares (MS Suite, Outlook, Acrobat, etc.).

Must have practical knowledge and experience of Nastran/Patran.

Must have excellent knowledge of aircraft structure and system installation technical requirements.

Must have practical knowledge and experience of CATIA/Enovia V5.

Have good communication skills including good English writing skills, and good English verbal skills. Knowledge of French is an asset.

Are a team player, you have the ability to work with minimal supervision, and are able to make decisions.

Are customer-oriented and innovative in problem solving.
 
Job Number: 2256
Job Location: Montreal, Canada
Rate: 61.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 10/25/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2263 - HYDRO-MECHANICAL SYSTEMS ENGINEER - cv - word doc only

Description:
Support the Client Final Line Assembly by leading all engineering related activities for a timely resolution to production line issues.

Witness system functional testing and conduct technical investigations on Hydro-Mechanical related issues (FBW & Control Surfaces, Wing High Lift, Hydraulics, Landing Gear, Brakes), analyze and develop solutions/recommendations and reports. Disposition RFCs and RNCs as required.

Work with the product development team to assists with technical proposal activities, including preparation of written material and presentations. Recommend and approve design changes.

Support flight test activities including the development and approval of Test Definition Sheets, trouble-shooting FTV issues, Problem Report Resolution, Test Witnessing, Test reports review and approval.

Support all development, Safety of Flight and Certification Testing on suppliers test rigs, systems and structures test rigs

Interface with the Design Approval Delegate (DADs and CDADs) to ensure all design activities and decisions meet regulatory requirement to achieve flawless certification.

Develop good working relationships with various departments within Company and with all suppliers.


Bachelor of Engineering Degree and eligibility for Professional Engineer registration. AME license is an asset.

Experience in providing engineering support to the Final Line/ Production.

5-10 years'experience in aircraft Hydro-Mechanical systems (FBW, Flt Ctrl, Hydraulic, Landing Gear).

Conversant with design, qualification and certification test requirements of Aircraft Electrical systems.

Knowledge of control systems including system controllers%u2019 integration and design and Software/Hardware certification (DO-160, DO-178, etc).

Familiar with Part 25 certification requirements and advisory material.

Possess strong integration skills, in both system partner management and system technical integration.

Familiar with Microsoft Office software tools.

Strong communication skills, ability to work well in a multi-disciplinary team environment.

Must have previous experience with fly by wire, wing high-lift or hydraulic systems on Commercial or Business Aircraft.

Must have experience in the definition and certification of at least one complex aircraft control system. Flight Controls/FBW experience would be an asset.

Must have a good understanding of all facets of system definition, integration, and certification and have a good knowledge of aircraft systems and interfaces (e.g., electrical, Hydraulic , Avionics, Auto-Flight, Flight Controls) integration, testing and installation.

Have a good knowledge of data buses, input signal management including monitoring, redundancy management and mode logic, and failure modes and effects.
 
Job Number: 2263
Job Location: Toronto, Canada
Rate: 61.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/22/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2276 - MECHANICAL DESIGNER - SURFACES - cv. word doc only

Description:
integrate all foam and upholstery build-up and installation on the seat and divan frame

Produce datasets (detail, assembly and Installation), 3D and 2D

Produce and maintain engineering drawings that define the interfaces, details and installations

Supports the W/P integrators in the design.

Produce deliverables such as PCD (procurement control drawing), AMO%u2019s (advanced material order) etc

Develop/Design with the Program's design intent and vision.

Closely communicate with supporting functions, Methods, operations, Customer support, design lead, Industrial Design, Weight and M&P.

Design for manufacturing and assembly.

Provide engineering support to Manufacturing for the installation.

Integrate all foam and upholstery build-up and installation on the seat and divan frame.

Highlight and mitigate risks to be able to meet commitments

Respect and follow guidelines BES / BAPS / BM / PDJ / standards/practices, processes and lessons learned.

Ensure design rules are respected and participate to populate the design guide lines.

Ensure the work (dataset & deliverables) are met on time with quality

Ensure customer and production standards are met.

Lead design activities with methods, production, logistics before entry in production.

Maintain an updated detailed product structure of their product, ( IDL, 3D product structure, Options matrix, etc)

Manage priorities to meet assigned deadlines.

Have a college or University mechanical or aerospace engineering degree or equivalent with a minimum of five (5) to eight (8) years of relevant experience and technical advisor experience would be an asset.

Have relevant technical experience in interior completion. Experience on Client Platform, Seating Design or Integration is an asset, as well as, configuration and spec%u2019ing experience.

Have solid experience working with Enovia/VPM Nav and Catia V5 (two (2) to five (5) years)

Have the understanding of product structure and relational modeling.

Have the ability to understand complex engineering issues and are innovative in problem solving.

Must be a self-motivated person, a team player able to work under pressure and under a minimum of supervision.

Have strong verbal and written English communication skills including verbal French.

Also demonstrate an excellent track record of meeting your commitments with success.

Bilingualism (French and English) is an asset.
 
Job Number: 2276
Job Location: Montreal, Canada
Rate: 56.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 10/20/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

2nd Shift Maintenance Technician

Description:
Description:
Perform maintenance in support of manufacturing facility on a variety of equipment throughout facility including machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment.  Responsible for monitoring hazardous waste for removal, maintenance of chemical storage area and clean up of chemical spills as required.  Nontoxic or non-hazardous.  Mainly Soap and/or grease
Will be operating a crane or fork lift.
 
Responsibilities:
Provide maintenance support in all areas of manufacturing facility including but not limited to machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment such as hand tools, welding equipment, fork lifts, and precision measuring equipment.  Maintain and develop preventative maintenance program for production related equipment.  Required to perform work in compliance to all safety and EHS policies and procedures. 
 
Qualifications:
  • Knowledge of EHS procedures and policies
  • Knowledge and safe use of production related equipment
  • Working knowledge and use of welding, electrical, and plumbing equipment including repair and maintenance of machinery
  • Millwright Skills and familiar with Electrical and/or Hydraulic
  • Able to interpret OEM handbooks and/or plant diagrams
  • Understanding of reading building plans and electrical schematics
  • Ability to use trouble-shooting and precision measuring equipment
  • Where applicable, trained in maintenance processes such as but not limited to welding, plumbing, electrical and mechanical troubleshooting
  • Vocational or technical training in a maintenance related discipline, strongly preferred

 
Training requirements:

  • Demonstrated ability to comply to maintenance safety procedures such as lock-out tags, etc.
  • Demonstrate ability to safely complete job tasks utilizing manual equipment as well as use of gauges needed for repair fabrication
  • Demonstrate ability to perform preventative maintenance, and repair of facilities equipment
  • Where applicable, complete safety and maintenance training and or certification

For consideration to this position, please contact Eric Khassanov at ekhassanov@pdstech.com or 843-277-6611.
 
 


 
Job Number: 1610057656
Job Location: KS City, MO
Duration: 12 months
Input Date: 05/25/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002FgpWAAS&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
6 Bleed Air Systems Designers Needed

Description:
The Designer for Bleed Air Systems/Vapor Cycle Systems is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
Prepare 3D layout models of the BAS and VCS
Prepare 3D installation and detail models of the BAS and VCS
Prepare 2D installation, assembly and detail drawings of the BAS and VCS
Work in a team environment supporting liaison engineering to research root cause and address production discrepancies

Education, Work Experience, Certification and/or Licensure:
Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program
5+ years of directly related design experience in the development and certification of aircraft BAS and VCS

Knowledge, Skills and Abilities:
1. Experience using CATIA V5 to prepare 3D parametric models and 2D drawings; minimum of 5 years experience
2. Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS

The Structures Company, LLC is an AA/EOE.
 
Job Location: Greensboro, NC
Rate: DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 09/29/2017
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Mechanic

Description:
Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. They are a mid-size but rapidly growing company in Seattle, WA that was founded in 2001. They have a new flight test facility in Moses Lake WA. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations

Primary Role: Performing routine and periodic maintenance throughout all phases of flight testing; maintaining quality and safety standards; keeping records; maintaining equipment and supplies.

Secondary Role: Support flight test engineers and ground operations personnel as necessary by helping to install test instrumentation, wiring, and custom manufactured hardware.


Job Duties and Responsibilities:
Perform daily pre and post flight inspections.
Perform routine servicing of aircraft systems.
Perform aircraft systems checks and calibration as required.
Trouble shoot and repair pre and post flight squawks in a timely manner.
Assist in the installation and removal of essential flight test instrumentation hardware and wiring.
Routine removal of panels to route and access flight test instrumentation wires and hardware.
Maintain safe operations and workspace.
Maintain equipment by completing preventive maintenance requirements; following manufacturer's instructions; troubleshooting malfunctions; calling for repairs.
Knowledge/Skills/Abilities:

Experience in maintenance support related to flight test is desired but not required.
Experience with or willing to learn working in a flight test environment.
Professional mannerisms, appearance and actions (self-confident and committed to high ethics).
Strong organizational, time management and prioritization skills:

Education
High School Diploma
Formal training in Aviation Maintenance Technologies or other related field
A & P Certificate or equivalent Certificate
1-5 years minimum experience maintaining commercial and/or regional aircraft
 
Job Location: Moses Lake, WA
Rate: open
Per Diem: Possible
Overtime: Yes
Duration: 2-3 years or direct
Start Date: Now
Input Date: 01/23/2018
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aero Thermal Fluids Analyst

Description:
Job Title: Aero Thermal Fluids Analyst

Location: Jupiter, FL

Duration: 12+ months

Pay Rate: Flexible dependent on experience

Special Requirements:

Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years
Candidates must be U.S. Citizens
Permanent residents are NOT eligible for this role
Dual citizens are NOT eligible for this role.
Candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable
Job description:

Conduct aerothermodynamic and heat transfer design and analysis of hypersonic air-breathing propulsion systems (ramjets/scramjets) and/or liquid rocket engines.
Develop thermal models to design and analyze cooled and un-cooled engine components.
Develop fluid flow models using Computational Fluid Dynamics codes or other analytical tools.
Design, test and analyze data from component rigs to supplement or validate analytical models.
Support planning and testing of engines (ground and flight) and analyze the test data.
Document work performed in the form of reports and briefings.
Skills:

Knowledge of aerothermodynamics and heat transfer as applied to scramjet and/or liquid rocket engine systems, including turbomachinery and combustion devices.
High proficiency levels in ANSYS Mechanical or Workbench heat transfer analysis tools, ANSYS CFX, FLUENT or comparable CFD codes.
Education:

B.S. degree or higher in Mechanical or Aerospace engineering, or equivalent engineering
 
Job Number: 375421
Job Location: Jupiter, FL
Rate: Open
Per Diem: No
Overtime: Yes
Duration: 12+ months
Start Date: ASAP
Input Date: 10/10/2017
Firm Name: CDI CORPORATION
Attention: Jason Greer
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aero Thermal Fluids Analyst

Description:
Location: Jupiter, FL
Rate: $60.00 - $62.00/HR
Duration: 1 year contract
Shift: 1st Shift

**Candidates must either have an Active Secret Clearance or have had a Secret clearance in the last two years **
** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
**Candidates must either have an Active Secret Clearance or have had a Secret clearance in the last two years **
-Conduct aerothermodynamic and heat transfer design and analysis of hypersonic air-breathing propulsion systems (ramjets/scramjets) and/or liquid rocket engines.
-Develop thermal models to design and analyze cooled and un-cooled engine components.
-Develop fluid flow models using Computational Fluid Dynamics codes or other analytical tools.
-Design, test and analyze data from component rigs to supplement or validate analytical models.
-Support planning and testing of engines (ground and flight) and analyze the test data.
-Document work performed in the form of reports and briefings.

Skills:
**Candidates must either have an Active Secret Clearance or have had a Secret clearance in the last two years **
-Knowledge of aerothermodynamics and heat transfer as applied to scramjet and/or liquid rocket engine systems, including turbomachinery and combustion devices.
-High proficiency levels in ANSYS Mechanical or Workbench heat transfer analysis tools, ANSYS CFX, FLUENT or comparable CFD codes.

Education:
**Candidates must either have an Active Secret Clearance or have had a Secret clearance in the last two years **
- B.S. degree or higher in Mechanical or Aerospace engineering, or equivalent engineering
 
Job Number: 7854
Job Location: Savannah, GA
Rate: $60.00 - $62.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 02/19/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aero Thermal Fluids Analyst with active secret / ANSYS heat transfer CFD aerothermodynamics liquid rocket engine systems turbomachinery combustion devices URGENT FL

Description:
160246/7337135

Job Title: Aero Thermal Fluids Analyst
62.86/hr


Number of Positions: 3
Remaining Positions: 3
Duties: ** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years **

** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

** Selected candidates for Jupiter, FL roles must be onboarded through one of these approved background check providers: EIS, First Advantage or Sterling / Talentwise. See attachment for specific background check onboarding requirements **


-Conduct aerothermodynamic and heat transfer design and analysis of hypersonic air-breathing propulsion systems (ramjets/scramjets) and/or liquid rocket engines.
-Develop thermal models to design and analyze cooled and un-cooled engine components.
-Develop fluid flow models using Computational Fluid Dynamics codes or other analytical tools.
-Design, test and analyze data from component rigs to supplement or validate analytical models.
-Support planning and testing of engines (ground and flight) and analyze the test data.
-Document work performed in the form of reports and briefings.
Skills: -Knowledge of aerothermodynamics and heat transfer as applied to scramjet and/or liquid rocket engine systems, including turbomachinery and combustion devices.
-High proficiency levels in ANSYS Mechanical or Workbench heat transfer analysis tools, ANSYS CFX, FLUENT or comparable CFD codes.

Education: B.S. degree or higher in Mechanical or Aerospace engineering, or equivalent engineering


Skills: Required
• ANSYS
• ACTIVE SECRET CLEARANCE

State/Province: Florida
City/Town: Jupiter
Address: 17900 Beeline Hwy


Start Date: 09/18/2017 Hours Per Week: 40.00
Est. End Date: 09/18/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7337135
Job Location: Jupiter, FL
Rate: 62.86/hr max
Duration: 12 month contract
Input Date: 02/27/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
Seeking an Aeronautical Engineer-N for an opening in Palmdale, CA.

RESPONSIBILITIES:
Candidate will be responsible for designing and building a system integration laboratory (SIL). This effort includes design of mechanical and electronic interfaces to support software development, integration and test efforts. Candidate will have hands-on hardware experience and software skills. Candidate will be able to troubleshoot hardware/software integration issues and perform integration and test. Define, develop, analyze and coordinate SIL requirements, allocate requirements and define interfaces between subsystems. Effort also includes flow down of requirements to procurement specifications, and management of vendor selection and vendor performance, including verification of requirements. The candidate will support system/software verification and validation effort and customer reviews during all phases of system development. The candidate will develop and support integration and system check out (SCO) procedures on flight test article and support pre-flight and post-flight analysis and reviews. Good oral and written communication skills are required as is the ability to flex and adapt in a fast-paced team environment. Complex organization and documentation skills are required.

REQUIRED EXPERIENCE:
Hardware and software integration experience. Demonstrated ability to design and troubleshoot mechanical and electronic interfaces to support software development and test. C or C++ programming experience. Experience with serial buses.

EDUCATION:
B.S. Degree or above in an Engineering Discipline Several years of laboratory experience

WORK HOURS:

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 165578
Job Location: Palmdale, CA
Duration: 6 Months
Start Date: ASAP
Input Date: 10/03/2017
Firm Name: CHIPTON ROSS
Attention: Debbie Aubert
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer with active secret / design of mechanical and electronic interfaces / integration test / serial buses C/C++ programming CA

Description:
160459
Requirement #AERO-REQ-0666
Work Location Palmdale, CA
Work Week 9/80
Priority High
Needed Date 11/27/2017
End Date 11/09/2018
Number of Resources 1
Security Clearance Secret

Title: Aeronautical Engineer

Description

Candidate will be responsible for designing and building a system integration laboratory (SIL). This effort includes design of mechanical and electronic interfaces to support software development, integration and test efforts. Candidate will have hands-on hardware experience and software skills. Candidate will be able to troubleshoot hardware/software integration issues and perform integration and test. Define, develop, analyze and coordinate SIL requirements, allocate requirements and define interfaces between subsystems. Effort also includes flow down of requirements to procurement specifications, and management of vendor selection and vendor performance, including verification of requirements. The candidate will support system/software verification and validation effort and customer reviews during all phases of system development. The candidate will develop and support integration and system check out (SCO) procedures on flight test article and support pre-flight and post-flight analysis and reviews. Good oral and written communication skills are required as is the ability to flex and adapt in a fast-paced team environment. Complex organization and documentation skills are required.

Skill/Experience/Education

Mandatory:

Final Secret Clearance.

Hardware and software integration experience.
Demonstrated ability to design and troubleshoot mechanical and electronic interfaces to support software development and test.
C or C++ programming experience.
Experience with serial buses.

Desired:

B.S. Degree or above in an Engineering Discipline Several years of laboratory experience


Interview Required Yes
OT Allowed Yes (OT Limitation: No)
Travel No
Non-Exempt

Rates
0-4 Yrs Pay Rate: 65.00 USD
5-8 Yrs Pay Rate: 70.00 USD
9+ Yrs Pay Rate: 75.00 USD
 
Job Number: JE-0666
Job Location: Palmdale, CA
Rate: 65-75/hr DOE
Duration: 12 month contract
Input Date: 03/15/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineers - Atlanta, GA

Description:
Now Hiring Aerospace Engineers!

Overview:

STS AeroStaff Services is now offering Aerospace Engineer jobs in Atlanta, Georgia. To learn more, check out the following information.

Are you tired of working the same dead-end contract positions? If so, STS AeroStaff Services offers the best aerospace engineering jobs in Atlanta, Georgia; positions that will reward your skills with competitive compensation and benefits. When it comes to your career as an Aerospace Engineer, don’t just wing it. Let STS AeroStaff Services help you fly your career forward!

At this point in the post, you can read on, apply online or contact an STS Recruiter at 1-877-707-5767.

Job Duties:

• The successful candidate serves as an engineer driving commercial aircraft sheet-metal and composite component repair and vendor oversight
• Reviewing data and recommending and implementing changes as required
• Reviewing, recommending, and implementing manufacturers' service bulletins and other correspondence to affected components
• Maintains compliance with applicable FAA, DOT, OSHA and EPA regulations, foreign regulatory requirements and Technical Operations Policy and Procedures (TOPP) and all other engineering processes
• Providing status for projects/issues through various briefings and documentation
• Preparing and conducting Engineering Working Group meetings
• Revising numerous FAA approved Manuals and Engineering Reports
• Collaboration and constant communication with Manufacturers and the FAA ACO and FSDO/CMO
• Irregular shift hours may be required, on rare occasion, due to critical requirements
• This may include weekend work depending on criticality of the issue
• Occasional travel is required to support the programs
• This position will focus, initially, on aircraft composite & mechanical component systems
• This position reports to a lead engineer and the Manager of Component Engineering

Qualifications:

• Bachelor Degree in Engineering with 0-5 years’ aviation related experience focus on repair development
• Previous airline, military, OEM or MRO experience with commercial aircraft is preferred
• Familiarity with airline flight operations and support systems, 14 CFR 121 dispatch regulations and 14 CFR 145 repair station regulations are highly desired
• Understanding of composite structure related to aircraft Thrust Reverses is preferred, but not required
• Must have strong customer service orientation and relationship management skills, strong project management skills; written and verbal communication skills; multi-tasking abilities; proven results-orientation; and strong analytical, organizational and time management skills
• Strong knowledge of Microsoft Office products and AUTOCAD, or similar, is desired
• Accurately anticipates the not so obvious impact of various solutions to technical problems
• Provides feasible alternatives to solve complex problems which require the regular use of ingenuity and creativity

Company Overview & Benefits:

STS AeroStaff Services works with the largest names in the aviation industry. We offer hundreds of career opportunities throughout the United States, and with more than two decades of experience, our aviation recruiters soar in their commitment to excellence and professionalism.

We proudly offer all qualifying candidates competitive rates, direct deposits, medical insurance, cash advances and referral bonuses. Have questions? Contact us today at 1-877-707-5767.

If you are interested in an aerospace engineering job in another part of the country, take a look at all of the Aerospace Engineer jobs we have live on our aviation jobs board!
 
Job Number: 40298
Job Location: Atlanta, GA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 10/06/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Instrumentation Technician

Description:
Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. They are a small but rapidly growing company in Seattle, WA. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants.

They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.The strategic purpose of the Test and Evaluation Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations.This individual in this position will work with engineers to design and install instrumentation to support the collection of flight test data. The ideal candidate is self-motivated, detail oriented, and knowledgeable on instrumentation theory.

Responsibilities:

Reading and creating wire diagrams.
Selecting or auditing appropriate sensors given engineering requirements.
Working with customers and engineers to define appropriate instrumentation requirements.
Designing instrument installations and creating installation instructions.
Instrumentation installation.
Evaluating instrumentation installations for function and safety.
Troubleshooting instrumentation problems.
Data acquisition system operation.
Documenting data system practices and procedures.
Generating instructions and operation manuals.
Developing sensor calibration and functional test procedures.
Maintaining calibration records.
Domestic and international travel may be required.
Desired Qualifications:

3+ years instrumentation experience in a testing environment. Aircraft flight test preferred.
Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
Ability to work interdependently, and lead small groups.
CATIA V experience beneficial.
Experience with data processing and analysis beneficial.
Computer programming experience beneficial.
Proficient in working with Microsoft Office applications including Word and Excel.
If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers.
 
Job Location: Moses Lake, WA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 10/06/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Instrumentation Technicians-Flight Test

Description:
Interested in candidates with aerospace or automotive backgrounds.

Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.
This individual in this position will work with engineers to design and install instrumentation to support the collection of flight test data. The ideal candidate is self-motivated, detail oriented, and knowledgeable on instrumentation theory.

Responsibilities:
� Reading and creating wire diagrams.
� Selecting or auditing appropriate sensors given engineering requirements.
� Working with customers and engineers to define appropriate instrumentation requirements.
� Designing instrument installations and creating installation instructions.
� Instrumentation installation.
� Evaluating instrumentation installations for function and safety.
� Troubleshooting instrumentation problems.
� Data acquisition system operation.
� Documenting data system practices and procedures.
� Generating instructions and operation manuals.
� Developing sensor calibration and functional test procedures.
� Maintaining calibration records.
� Domestic and international travel may be required.

Desired Qualifications:

� 3+ years instrumentation experience in a testing environment. Aircraft flight test preferred.
� Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
� Ability to work interdependently, and lead small groups.
� CATIA V experience beneficial.
� Experience with data processing and analysis beneficial.
� Computer programming experience beneficial.
� Proficient in working with Microsoft Office applications including Word and Excel.
 
Job Location: Moses Lake, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: 2-3 year contract or Direct
Start Date: Now
Input Date: 01/23/2018
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Door Design Engineer

Description:
Aircraft Door Design Engineer
Location: Southeast
Duration: Long term contract: 12+ months
Rate: Open, DOE

US Citizen, Or Greencard holder.
Medical and dental
401k with match
15 holidays
Time off during week of Christmas
Bonus potential


General Summary:
 
Design Engineer responsible for the conceptual design and production engineering of Aircraft Doors structural and system components.  The candidate will be responsible for conceptual layout, detailed design and aircraft production & in-service design and modification.
 
Duties and Responsibilities:
Generates Engineering Models and Drawings utilizing CATIA Version 5
Performs trade studies to identify optimal engineering solution
Collaborates with the Integrated Product Team to resolve cross functional issues
Reviews work performed by others and ensure work is to the highest standard
Implements Industry best engineering practices (design for manufacturing, design for reliability and design for maintainability).
Have the ability to understand and apply certification requirements
Implement design solutions optimized for cost and weight
Manages task execution to ensure on-time and on-target completion.
Utilizes drafting and Geometrical Dimensioning &Tolerancing knowledge to optimize part design for cost and functionality
Searches for problem root cause and develop corrective action plans and solutions
Serves as an interface within the Doors Engineering group to ensure effective communication, coordination, and timely completion of project milestones
Leads or participates in design / development reviews with management and internal customers. The candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience
                                                   
                            
Qualifications
 
Education, Work Experience, Certification and/or Licensure: 
 
BS in Mechanical Engineering with 10-15 years directly related experience
OR MS / MBA with 8-13 years of experience
OR 18-23 years directly related experience
Some Travel may be required

Knowledge, Skills and Abilities:
Proficient in use of CATIA Version 5
Advanced knowledge of drafting rules
Advanced knowledge of Geometrical Dimensioning and Tolerancing
Proficient in Microsoft Office Products
Use of Team Center
Familiar with FAR Part 23 or Part 25
Functional knowledge of SAP
 
 
The Structures Company LLC is an AA/EOE.
 
Job Location: southeast, NC
Rate: "open"
Per Diem: yes
Duration: 12+ month
Start Date: asap
Input Date: 10/05/2017
Firm Name: STRUCTURES COMPANY LLC
Attention: Mark Sharp
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Assembler - Level 1

Description:
PDS Tech, Inc. is seeking a candidate for Assembler- Level 1 in Redmond, WA.
Various shifts available. 

  • Assembles fabricated parts at floor stations.
  • Tests and calibrates parts and mechanisms to meet tolerances and product specifications.
  • Uses hand tools and power tools to assemble units according to product specifications.
  • Identifies units that fail tests or tolerance levels and repairs as necessary. 
  • Has knowledge of commonly-used concepts, practices, and procedures within a particular field.
  • Relies on instructions and pre-established guidelines to perform the functions of the job.
  • Works under immediate supervision. Primary job functions do not typically require exercising independent judgment.
  • Typically reports to a supervisor or manager.

Special Considerations:
Lifting is generally in the 10 to 15 Lbs. range with minimal repetitions.
Exposure to machinery, chemical, biological, and physical risks is minimal. 
Position will require regular use of a microscope.

Additional qualifications and considerations: 
Experience using and comfortable with a microscope for assembly and inspection of parts. 
Experience working in a class 1000 cleanroom. 
Comfortable working with chemicals and using personal protective equipment. 

 

  • The minimum level of education required for ISC assignments is High School diploma/GED.
  • Suppliers should obtain a copy of the candidates highest level of education (HSD/GED or degree) to avoid delays in onboarding.

 
Job Number: 1710069437
Job Location: Redmond, WA
Duration: 6 months
Input Date: 05/25/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: John Blackmore
Address: TIME SQUARE 660 BUILDING
660 SW 39TH ST STE 215

City, State: RENTON, WA 98057
Phone: 206/763-2840
800 Phone: 800/678-8644
Fax Phone: 206/763-3283
Email: cecjseattle@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002K46JAAS&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembly Mechanic - Aerospace (KS)

Description:
Assemble, install, seal, rig, inspect, and complete precision and other structural and system components, working from drawings, documents, process specifications, quality control requirements, and established processes and procedures. Functional test and correct, fit form and function of assemblies and components.

Duties:
The Company will provide appropriate assistance in job training to enable employees to perform all necessary job functions including the following:
1. Work with blueprints, changes, specifications, work orders, etc. to assemble and install to quality requirements parts and assemblies.
2. Complete required data gathering transactions to facilitate assembly progression.
3. Setup and perform all manual and automated assembly operations, and portable machine functions required to accomplish assignments.
4. Perform any and all required pickup, rework, fabrication, change incorporation, functional testing or check during or after final assembly and/or assembly progression.
5. Move and/or obtain correct parts, materials, tools, assemblies, etc.
6. Use precision measuring instruments required to accomplish work assignments.
7. Report and/or investigate job handicaps such as: errors in parts, assembly procedures, tools, sequences, etc.
8. Perform routine minor machine maintenance as part of their daily work duties (e.g., where applicable, replacing machine filters, changing standard light bulbs on machines and equipment, maintaining lubrication/coolant levels, etc. as related to basic Total Preventative Maintenance duties).
9. Routinely move product within the immediate manufacturing work area, including across isle, using shop assigned equipment as required and complete transactions necessary to move product to the next operation. On an exception basis, move product to the next operation within a building.
10. Support the continuous flow of product within the manufacturing process by training, coaching and assisting employees of all classification levels.
11. Document any discrepancies according to specification, process, and procedure.
12. Cross trains in inspection and becomes SIA qualified.

Sealer - Seal parts, assemblies and sub-assemblies fillet and fay, apply leveling compound or scotch cast etc.
• Pressure / Vacuum Test - Perform visual and auditory leak checks in aircraft sections
• Precision Bench Assembly - Assemble precision aircraft parts and assemblies such as landing gear, control linkage etc.
• Sub-Assembly - Assemble parts to make sub assemblies using templates, jigs, and fixtures
• Assembly / Installation Structures - Assemble structural parts, assemblies, and skins to make larger assemblies
• Assembly / Installation Doors - Pre- assemble, trim, fit , rig , seal, align, and adjust aircraft door systems
Integral Fuel Cell - Apply sealing compounds to seal fuel cell and wing section components
• Inspection - Inspect and document non conformances on final assemblies, subassemblies, systems, and installations
Verifies dimensions of parts using both mechanical and electronic measurement tools and, relative to these inspection duties, initiate and document corrective action for programming issues and other problems.

Setup and operate conventional and Computerized Numerical Controlled (CNC) fastening equipment, similar to Multi-Task Gantry Riveter’s (MTGR’s), Brotje’s , C-Frames, IPAC’s etc., to assemble components in accordance with engineering specifications.

Requirements:
ALL SUBMISSIONS MUST HAVE HAD TO WORK IN ANY OF THE FOLLOWING CAPACITIES:

With Client Direct (Wichita and/or Tulsa)
-or-
With Client Contract (Wichita and/or Tulsa)

Client ID numbers will need to be provided at the top of resumes along with their Rehire Eligibility information

'Travel work' is what's needed e.g. Contractors will work in the 737 fuselage area and 'traveling' throughout the line to resolve/fix issues/rework so existing Spirit Employees can focus on their own assembly work.

MUST HAVE AT LEAST 3 YEARS' EXPERIENCE IN AIRCRAFT ASSEMBLY
Level C - Assembly Mechanics
Must have structural riveting, sealing and wiring experience.

Much have the skill and knowledge to perform in all of the general functions of Assembly Mechanic:

Assembly/Installation Structures
Sub Assembly
Sealer

Each of the functional areas described below:

Sealer - Seal parts, assemblies and sub-assemblies fillet and fay, apply leveling compound or scotch cast etc.

Sub-Assembly - Assemble parts to make sub assemblies using templates, jigs, and fixtures

Assembly / Installation Structures - Assemble structural parts, assemblies, and skins to make larger assemblies
Assembly / Installation Doors - Pre- assemble, trim, fit, rig, seal, align, and adjust aircraft door systems.
 
Job Number: FD-551987KS
Job Location: Wichita, KS
Rate: $30.00/HR
Per Diem: $110.00/WKLY (if applicable)
Overtime: Yes - Possible
Duration: 90-days - (3 months)
Start Date: 10/13/2017
Input Date: 10/10/2017
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

Aviation Mechanics - Clearance

Description:
Seeking Experienced Aviation Mechanics for a contract opportunity in San Antonio, Texas!

Work to be performed on a VIP aircraft, 747 platform and active Top Secret Clearance Required.
Several Openings For:
  • General Mechanic
  • Electrical
  • Structures
  • Avionics Tech
  • Quality Inspection
  • Supply Chain Specialist


Great Opportunity for Ex-military/Exiting Military/ and Veterans
Previous military experience a plus!


 
Experience performing routine maintenance, modifications, and rework on VIP - 747 aircraft.
Required- Minimum of 5 years' experience working on 747 platform.
Tools: no tools required
Location: San Antonio, Texas

***Current Security Top Secret Clearance required
US Citizenship Required: Clearance requirements will be used during resume screening. Individuals must hold a current Clearance or Equivalent Clearance/ investigation type to be considered for this position, clearance level must be noted on the resume. Must follow submittal procedures below for consideration. No phone calls please, only candidates that provide resumes with the job ID number will be contacted and considered for the opportunity.

**submittal must reference Job ID number 1710063637

Camille Zunker- czunker@pdstech.com
 
Job Number: 1710063637
Job Location: San Antonio, TX
Duration: 12 months
Input Date: 05/25/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Camille Zunker
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002GBZ0AAO&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
Supports, performs and manages development, design, integration and test function and project teams of Avionics/flight control systems, including electronics, SW, hydraulics, etc. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Position Roles & Responsibilities:
- Create Catia V5 hydraulic and mechanical flight control layouts, installations, assemblies, details.
- Create, release, revise Catia V5 engineering detail, assembly, installation drawings and bill of materials using Enovia Matrix, LCA.
- Work closely with various design groups to coordinate designs and establish aircraft interfaces.
- Work closely with aircraft final assembly shop personnel.
- Work closely with various suppliers.

Experience Required:
- Minimum of a BS in Engineering Design required
- High level communications skills both written and oral.
- In-depth knowledge of Catia V5, Enovia Matrix and LCA functionality.
- Experience with Catia V5 Tubing function.
 
Job Number: CT1819
Job Location: Stratford, CT
Rate: 62.00
Per Diem: Possible
Overtime: Possible
Duration: 15 months
Input Date: 10/04/2017
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Bill Carriveau
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics UT-ENG-3104MST

Description:
DESCRIPTION
Supports, performs and manages development, design, integration and test function and project teams of Avionics/flight control systems, including electronics, SW, hydraulics, etc. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

POSITION ROLES & RESPONSIBILITIES
- Create Catia V5 hydraulic and mechanical flight control layouts, installations, assemblies, details.
- Create, release, and revise Catia V5 engineering detail, assembly, installation drawings and bill of materials using Enovia Matrix, LCA.

- Work closely with various design groups to coordinate designs and establish aircraft interfaces.
- Work closely with aircraft final assembly shop personnel.
- Work closely with various suppliers.

EXPERIENCE REQUIRED
- Minimum of a BS in Engineering Design required
- High level communications skills both written and oral.
- In-depth knowledge of Catia V5, Enovia Matrix and LCA functionality.
- Experience with Catia V5 Tubing function.
 
Job Number: 17-796-1819
Job Location: Northeast
Rate: OPEN
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 01/29/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

Bleed Air Designer (7 needed)

Description:
The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
1. Prepare 3D layout models of the BAS and VCS.
2. Prepare 3D installation and detail models of the BAS and VCS.
3. Prepare 2D installation, assembly and detail drawings of the BAS and VCS.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program
2. Minimum 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.

Knowledge, Skills and Abilities:
1. Experience using CATIA V5 to prepare 3D parametric models and 2D drawings. Minimum of 10,000 hours.
2. Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
3. Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS.
 
Job Number: 28-024
Job Location: Greensboro, NC
Rate: Up to $60/hr, DOE
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 05/25/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CREO Product Definition & Verification (Checking) Designer III/IV

Description:
Creo Product Definition & Verification (Checking) Designer III/IV

Location: Canoga Park, CA
Pay Rate: DOE ($45/hr - $60/hr)
Duration: 6 month W2 contract
Shift: Regular 40 hour week, possible overtime
** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
-Under limited general direction and following established procedures in accordance with contractual requirements and Company policy and procedures, this position performs engineering design assignments for preparation of engineering design documents and maintaining the design disclosure.
-Typical responsibilities include: Prepare product definition (CAD models and drawings).
-Perform Verification of Product Definition (Checking) includes models, drawings and PLM attributes and relationships.

Breakdown:
40% - Create, check and maintain design product definition (Models & Drawings) for engineering designs. This includes, but is not limited to, preparation of design layouts and/or preliminary conceptual design layouts, as well as outsourced design project leadership.
30% - Performs design calculations to validate any phase of design requirements.
20% - Estimation of resources and schedule required to complete a design activity and training to staff.
10% - Provide technical guidance to less senior CAD designers and to design support personnel.

Skills:
** 10 years as a drawing and model checker for Aerospace mechanical hardware**
-5-10 years of experience with Creo along with experience using CAD database management and PLM tools - Windchill required.
-Knowledge of Mechanical and Electrical harnessing and packaging of Aerospace hardware required.
-Expert knowledge of geometric dimensioning and tolerancing (ASME Y14.5).
-ASME Certification in GD&T is a plus.
-Ability to read and interpret product definition and related specifications.
-Electronic markup tools and the ability to work paperless are required.

Education:
-Requires a Bachelor’s degree in an appropriate discipline and at least 5 years of related experience or an equivalent combination of education.

Required Skills:
CREO GEOMETRIC DIMENSIONING GEOMETRIC TOLERANCING WINDCHILL AEROSPACE

Additional: PACKAGING ENGINEERING HARNESS CABLING
 
Job Number: 8026
Job Location: Canoga Park, CA
Rate: 45-60
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 03/21/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Calibration Engineer

Description:
1st or 2nd shift

Mechanical Component Calibration lab technician capable of working from Engineering drawings with limited guidance to fabricate and install mechanical load and data acquisition systems required to support ongoing Engineering Ground and Flight Test Development programs.

Duties and responsibilities include the calibration of aircraft and ground test development components, the acquisition and evaluation of their test data, as well as wiring and check out of Ground Test Instrumentation systems.

Must be able to work at heights.
 
Job Number: CT39320
Job Location: Stratford, CT
Rate: 40.00
Per Diem: Possible
Overtime: Possible
Duration: 1 year
Input Date: 10/12/2017
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Bill Carriveau
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Calibration Technician -

Description:
JSG is looking for a Calibration Technician for a 15 Month Contract Opportunity with our client in Coatesville, PA


ASSIGNED DUTIES:

Recall calibrated tooling periodically in accordance with company's master calibration schedule.
Send complex calibrated tooling out to a calibration vendor for periodic inspection/maintenance.
Perform simple calibrations in-house in accordance with Sikorsky and NIST (National Institute of Standards and Technology) procedures.
Maintain certification documentation for each piece of Sikorsky PA’s calibrated tooling.
Follow broad instructions and general methods to work from metrology procedures and standards, tool designs, engineering drawings, etc., to perform inspection and calibration duties.
Set up and operate a variety of precision gages and instruments, and perform complex layouts, to inspect and calibrate tools to metrological standards.
Repair, adjust micrometers, height gages, vernier calipers
Maintain close liaison with other departments to resolve metrology problems.
Troubleshoot/repair testing equipment; have a working knowledge of electricity, circuitry, and mechanical components.
Demonstrate knowledge of the technical standards for establishing calibration set out by the American Society of Testing and Materials.
Skills Required:

Candidate must demonstrate excellent math skills (emphasis on trigonometry and geometry) and be able to analyze numerical data
Candidate must demonstrate computer literacy; with emphasis on Microsoft Access and Excel for data management.
Experience Required:

Minimum High School Diploma or Equivalent Required
Formal education in Calibration Technology; or American Society for Quality (ASQ) Certified Calibration Technician certification Required
Demonstrated aerospace metrology experience or Military calibration experience required
 
Job Number: 358918
Job Location: Coatesville, PA
Rate: $21.50hr
Per Diem: no
Overtime: Yes
Duration: 15 months
Start Date: asap
Input Date: 10/19/2017
Firm Name: JOHNSON SERVICE GROUP
Attention: Rich Martinsen
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Cognizant Engineer-PERM

Description:
General Summary:
The Oxygen System Cognizant Engineer is responsible for providing technical expertise in support of the Oxygen System through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
Oversee and coordinate Oxygen System project activities through all phases of the project including preliminary design, detailed design, development, certification, production and in-service product support.
Interface with other company departments, FAA and suppliers to ensure project schedule milestones are met.
Actively support the development of company infrastructure.
Maintain consolidated Engineering Parts List (EPL), weight status and cost status for the Oxygen System.
Support design, manufacturing (production), in-service and flight test activities.
Maintain and present to management integrated project schedule and status for layouts, ICD’s, drawings, development tests, certification tests, flight test plans, ITF tests related to the Oxygen System and plans/status to resolve flight test, manufacturing and in-service issues.
Track and report status of action items related to design, development, certification, sustaining, in-service and flight test related to the Oxygen System.
Provide support as required in other areas of the Mechanical Systems 2 team that includes bleed air systems, air conditioning, waste system, and ice and rain protection systems.

Education, Work Experience, Certification and/or Licensure:
Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program;
5+ years of directly related technical experience in the development and certification of aircraft Oxygen Systems required.
 
Job Number: LHON
Job Location: Greensboro, NC
Rate: salary-relo available
Per Diem: n/a
Overtime: TBD
Duration: PERM
Start Date: asap
Input Date: 10/05/2017
Firm Name: YOH SERVICES
Attention: Lisa Hughes
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/791-1565
800 Phone: 800/298-0666
Website: jobs.yoh.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer (Project Engineer) II/III

Description:
Location: Canoga Park, CA
Rate: $35.00 - $48.00/HR
Duration: 6 month contract


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:
**This is NOT a Designer role. Please make sure that all candidates with a Designer background or Designer expectations are aware of this. This is a Project Engineer role **
**Candidates should have 2 to 8 years of related work experience. No recent college graduates please**
**Position is for a Component Product Engineer for the development, fabrication and test of rocket engine system interconnect hardware**


Skills:
- 25%: Development and fabrication support of rocket engine components using engineering and scientific principles.
- 25%: Translates engineering and scientific concepts from preliminary ideas through product life cycle.
- 20%: Interfaces with other members of project or program teams, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
- 10%: Develops trade studies, design concepts, systems integration and component-level test plans.
- 10%: Supplier integration with external vendors
- 10%: Analyzes and verifies product design and performance for adequacy and reliability. Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.


Education:
- A Bachelor's degree in Mechanical or Aerospace Engineering.
- Candidates should have 2 to 8 years of related work experience. No recent college graduates please.
 
Job Number: 7819
Job Location: Canoga Park, CA
Rate: $35.00 - $48.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 05/07/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer (Project Engineer) II/III / local preferred URGENT CA

Description:
160209/7333281

8 open positions

48/hr max

Manager is currently interviewing.

Job Title: Component Product Engineer (Project Engineer) II/III



Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** This is NOT a Designer role. Please make sure that all candidates with a Designer background or Designer expectations are aware of this. This is a Project Engineer role **



* Candidates should have 2 to 8 years of related work experience. No recent college graduates please *



Position is for a Component Product Engineer for the development, fabrication and test of rocket engine system interconnect hardware.

Skills:
25%: Development and fabrication support of rocket engine components using engineering and scientific principles.
25%: Translates engineering and scientific concepts from preliminary ideas through product life cycle.
20%: Interfaces with other members of project or program teams, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
10%: Develops trade studies, design concepts, systems integration and component-level test plans.
10%: Supplier integration with external vendors
10%: Analyzes and verifies product design and performance for adequacy and reliability. Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.

Education:
A Bachelor's degree in Mechanical or Aerospace Engineering.

Skills:
Required

PROJECT ENGINEER COMPONENT ENGINEERING

State/Province: California
City/Town: Canoga Park

Start Date: 09/11/2017 Hours Per Week: 40.00
Est. End Date: 03/11/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7333281
Job Location: Canoga Park, CA
Rate: 48/hr max
Duration: 6 month contract
Input Date: 05/18/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Door Engineer

Description:
Composites Door Engineer guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services

Principal Duties and Responsibilities:

Essential Functions: 1. selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative CATIA V5 Experience Required Mechanical Systems Experience Required Composite Door Experience Desired Supplier Management Experience Desired


Education and Experience Requirements:
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs. in the specific technical discipline or 15 yrs. broad engineering experience in several technical disciplines with Bachelors, or 8 yrs. in the specific technical discipline with Masters, or 6 yrs. in the specific technical discipline with PhD.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 12/01/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract - DER Electro-Mechanical Systems Eng Landing Gear Systems & Hydraulic Systems

Description:
Unique Skills:

- Consultant DER or EAR with current FAA authorizations in Landing Gear and related Systems and Hydraulic Systems areas - Currently in good DER or EAR standing with the FAA - Currently up to date with all required FAA DER or EAR training, certification, etc. - Eligible to be recognized and approved by the ODA to perform DER and/or EAR functions, including but not limited to signing 8100- and related forms in the above noted areas, in support of ODA projects and released engineering deliverables across the G650, G550, and G450 platforms - Previous experience in the above noted areas and aircraft platforms, as well as with associated Engineering release processes and procedures, in a DER or EAR and Senior Engineer role is preferred - US Citizen only
 
Job Number: 116381
Job Location: Savannah, GA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 10/12/2017
Firm Name: INTERGEN GROUP
Attention: kim Mason
Address: 5051 PEACHTREE PKWY STE 200
City, State: PEACHTREE CORNERS, GA 30092
Phone: 678/318-1816
Fax Phone: 678/493-1467
Website: www.intergengroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract - Manufacturing Eng II

Description:
Unique Skills:

Experience with Catia V5, SAP, and Solumina preferred. Must be able to work with production and engineering personnel to resolve issues. Must be able to generate build plans and manufacturing bill of materials from 3D data.


Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.


Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:

Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 117244
Job Location: Savannah, GA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 10/12/2017
Firm Name: INTERGEN GROUP
Attention: Kim Mason
Address: 5051 PEACHTREE PKWY STE 200
City, State: PEACHTREE CORNERS, GA 30092
Phone: 678/318-1816
Fax Phone: 678/493-1467
Website: www.intergengroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract - Manufacturing Eng II

Description:
Unique Skills:

Prefer Experience with Engineering Change Board of Systems components

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.


Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:

Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.

Languages Required (in addition to English): English
 
Job Number: 117487
Job Location: Savannah, GA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 10/12/2017
Firm Name: INTERGEN GROUP
Attention: kim Mason
Address: 5051 PEACHTREE PKWY STE 200
City, State: PEACHTREE CORNERS, GA 30092
Phone: 678/318-1816
Fax Phone: 678/493-1467
Website: www.intergengroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract - Manufacturing Engineer I

Description:
Unique Skills:

Experience in SAP/Solumina preferred


Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Entry level position.


Position Purpose:
Under moderate supervision, create manufacturing work instructions, assist with Planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.



Principle Duties and Responsibilities:

Essential Functions: 1. Perform technical studies and conduct analysis of operations (existing or proposed). Develop plans and recommendations for equipment and tooling needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility. 10. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 11. Author DRDI/DMT rework instructions to support effective corrective actions. 12. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Perform productibility studies from engineering drawings. 5. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 6. Incorporate Lean Manufacturing Methodology into existing and future processes. 7. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 8. Support all Safety, Sustainability and Ergonomic Initiatives. 9. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Work on special projects. 2. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 3. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Basic knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc. 4. Lean Specialist certification or higher preferred.
 
Job Number: 116971
Job Location: Savannah, GA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 10/12/2017
Firm Name: INTERGEN GROUP
Attention: Kim Mason
Address: 5051 PEACHTREE PKWY STE 200
City, State: PEACHTREE CORNERS, GA 30092
Phone: 678/318-1816
Fax Phone: 678/493-1467
Website: www.intergengroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract - NC Eng II

Description:
Unique Skills:

Must be proficient with Catia modeling, drafting, and Catia NC Mill Function.


Education and Experience Requirements:
Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen (18) months of machining, planning, tool design, or related manufacturing experience.


Position Purpose:
Under general supervision, perform activities related to numerical control (NC) programming, including machining methods, tooling concepts, and programs for NC milling machines and lathes.

Principle Duties and Responsibilities:

Essential Functions: 1. Conduct a thorough analysis of engineering drawings, tool design drawings, and/or electronic models, to determine the optimal machining methods, selection of machine tool, and material cut size. 2. Interact with planners, tool designers, engineering, and customers as required, to finalize plan. 3. Develop cutter motion logic per operation sequence, selecting proper spindle speeds and feed rates. 4. Perform a thorough check on all aspects of the program and verify cutter paths through the utilization of Vericut. 5. Develop operator set-up sheets for numerical control machines. 6. Develop flat pattern mylars and templates as required. 7. Produce 2-D Catia tool drawings as required.

Additional Functions: 1. May represent department in contacts with other departments, and may be required. to coordinate efforts with vendors or customers. 2. Assist in formulating Numerical Control policies, procedures, and specifications as required. Perform other duties as assigned.

Other Requirements: 1. Good verbal and written communication skills required. 2. Must be able to read and interpret blueprints. 3. Familiarity with various machining methods, technical writing, and computer use. 4. Must possess good drafting, math, and geometry skills. 5. Must be proficient with Catia modeling, drafting, and Catia NC Mill function.
 
Job Number: 116721
Job Location: Savannah, GA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 10/12/2017
Firm Name: INTERGEN GROUP
Attention: kim Mason
Address: 5051 PEACHTREE PKWY STE 200
City, State: PEACHTREE CORNERS, GA 30092
Phone: 678/318-1816
Fax Phone: 678/493-1467
Website: www.intergengroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Creo Product Definition & Verification (Checking) Designer III/IV CA

Description:
160469/7457002

Job Title: Creo Product Definition & Verification (Checking) Designer III/IV
Canoga Park, CA
60/hr max

Duties:

** Candidates must be U.S. Citizens **** Permanent residents are NOT eligible for this role **** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Under limited general direction and following established procedures in accordance with contractual requirements and Aerojet Rocketdyne policy and procedures, this position performs engineering design assignments for preparation of engineering design documents and maintaining the design disclosure. Typical responsibilities include: Prepare product definition (CAD models and drawings). Perform Verification of Product Definition (Checking) includes models, drawings and PLM attributes and relationships.

40% - Create, check and maintain design product definition (Models & Drawings) for engineering designs. This includes, but is not limited to, preparation of design layouts and/or preliminary conceptual design layouts, as well as outsourced design project leadership.

30% - Performs design calculations to validate any phase of design requirements.

20% - Estimation of resources and schedule required to complete a design activity and training to staff.

10% - Provide technical guidance to less senior CAD designers and to design support personnel.

Skills: -10 years of experience with CAD systems (Creo 2.0 preferred) along with experience using CAD database management and PLM tools (Windchill prefered).
-Knowledge of Mechanical and Electrical harnessing and packaging of Aerospace hardware required.
-Expert knowledge of geometric dimensioning and tolerancing (ASME Y14.5).
-ASME Certification in GD&T is a plus.
-Ability to read and interpret product definition and related specifications.
-Electronic markup tools and the ability to work paperless is required.

Education: -Requires a Bachelor's degree in an appropriate discipline and at least 5 years of related experience or an equivalent combination of education.

Skills and Experience:
Required Skills:
CREO
GEOMETRIC DIMENSIONING
GEOMETRIC TOLERANCING
WINDCHILL
AEROSPACE
Additional Skills:
PACKAGING ENGINEERING
HARNESS CABLING

# of Positions: 5

Location:
Canoga Park, CA


Schedule:
Start Date: 11/06/2017
Estimated End Date: 05/06/2018
Hours Per Week: 40.00
Hours Per Day: 8.00

Schedule Notes: Regular 40 hour week. OT possible.
 
Job Number: MB-7457002
Job Location: Canoga Park, CA
Rate: 60/hr max
Duration: 6 month contract
Input Date: 11/28/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Creo Product Definition & Verification Designer III/IV

Description:
Under limited general direction and following established procedures in accordance with contractual requirements and policy and procedures, this position performs engineering design assignments for preparation of engineering design documents and maintaining the design disclosure. Typical responsibilities include: Prepare product definition (CAD models and drawings). Perform Verification of Product Definition (Checking) includes models, drawings and PLM attributes and relationships.

40% - Create, check and maintain design product definition (Models & Drawings) for engineering designs. This includes, but is not limited to, preparation of design layouts and/or preliminary conceptual design layouts, as well as outsourced design project leadership.

30% - Performs design calculations to validate any phase of design requirements.

20% - Estimation of resources and schedule required to complete a design activity and training to staff.

10% - Provide technical guidance to less senior CAD designers and to design support personnel.

Skills: -10 years of experience with CAD systems (Creo 2.0 preferred) along with experience using CAD database management and PLM tools (Windchill prefered).
-Knowledge of Mechanical and Electrical harnessing and packaging of Aerospace hardware required.
-Expert knowledge of geometric dimensioning and tolerancing (ASME Y14.5).
-ASME Certification in GD&T is a plus.
-Ability to read and interpret product definition and related specifications.
-Electronic markup tools and the ability to work paperless is required.
Education: -Requires a Bachelor's degree in an appropriate discipline and at least 5 years of related experience or an equivalent combination of education.
 
Job Number: CA39225
Job Location: Canoga Park, CA
Rate: up to $60.00
Per Diem: Split
Overtime: Possible
Duration: 6 mos +
Start Date: Nov 2017
Input Date: 10/06/2017
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Karen Wilkes
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
DER Electro-Mechanical Systems Eng Landing Gear & Hydraulic Systems

Description:
DER Electro Mechanical Systems Eng Landing Gear Systems & Hydraulic Systems

Savannah, GA
Rate: $135/HR
Long Term contract

Unique Skills:

- Consultant DER or EAR with current FAA authorizations in Landing Gear and related Systems and Hydraulic Systems areas - Currently in good DER or EAR standing with the FAA - Currently up to date with all required FAA DER or EAR training, certification, etc. - Eligible to be recognized and approved by the Company ODA to perform DER and/or EAR functions, including but not limited to signing 8100- and related forms in the above noted areas, in support of Company ODA projects and released engineering deliverables across the G650, G550, and G450 platforms - Previous Company experience in the above noted areas and Company aircraft platforms, as well as with Gulfstream associated Engineering release processes and procedures, in a DER or EAR and Senior Engineer role is preferred - US Citizen only
 
Job Number: 7930
Job Location: Savannah, GA
Rate: $135
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 01/30/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Checker

Description:
Must have secret clearance

Work with designers to ensure the design meets all requirements, including Safety of Flight.

Experience with all aspects of mechanical design, including layout, documentation and checking per IAW ASME Y14.24 and be familiar with MIL-T-3100 and MIL-STD-100. 5 to 10 years experience of creating Pro-E / CATIA drawings and drawing release. Proficiency with said CAD skills is required.
 
Job Number: 40415
Job Location: FL
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 12/21/2017
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Checker

Description:
1. Review 3D engineering data for conformance to requirements as directed.
2. Check parts for fit, form and function to the extent that information is available.
3. Must have experience in Product Lifecycle Management (PLM) processes and tools, checking CATIA v5 , SmarTeam, as well as other CAD datasets, in accordance to requirements as directed.

Checkers are responsible for determining the acceptability of data in the following areas:
1. Accuracy and completeness of engineering product definition data, including CAD and PDM data.
2. Proper application and compliance with all Engineering and customer drawing requirements.
3. Use and understanding of GD & T a must.
4. Dimensioning and tolerancing including familiarity with ASME Y14.5.
5. Application of best drafting and design practices and procedures.
6. Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
7. Advise Design personnel regarding company drawing and design practices and procedures.
8. Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
9. Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
10. Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
11. Knowledge of company parts list & PdocM, a plus.
12. Knowledge of CHS, EWIS, Electrical harness Design a plus but not required.

Essential Duties and Responsibilities
1. Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems.
2. Ensures designs meet customer criteria, quality standards and FAA requirements.
3. Adheres to budget and project schedules.
4. Provides design guidance and feedback to other engineering personnel.
5. Other duties as assigned.
6. Knowledge of industry design and documentation standards.
7. Experience with mechanical assemblies and manufacturing technique design.
8. Ability to work independently and cross-functionally.
9. Experience in communicating with employees/teams in productive and efficient manner. • Strong communication and problem-solving skills.
10. Knowledge of Excel, Share Point software, Microsoft Office a plus

Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
 
Job Number: 24-191
Job Location: Savannah, GA
Rate: $50.00 - $55.00
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 02/06/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Checker

Description:
All candidates must have a Bachelor’s degree to apply.

RESPONSIBILITIES
• Reviews Engineering design documents consisting of drawing, engineering order and parts list for consistency with company standards, design quality, requirements and its corrective interpretation.
• Also reviews 3D models used to produce 2D design are properly associated and provide repeatability and correct representation in the Digital Aircraft Model.
• Constant Interaction with Design teams to review/discuss issues and agree on acceptable solutions

TASKS
• Check Drawing, Engineering order and parts list for adherence to company standards.
• Check 3D information in CATIA and PLM System clearly describe and annotate issues found to designer and engineering design field
• Work with design team to solve issues identified
• Consult with design team and other checkers for interpretation provide inputs to management on major issues being identified and help develop alternatives for solutions

REQUIREMENTS
• 10 plus years of experience designing mechanical and/ or structural parts, assemblies or installations for aircraft
• 7 years of experience with CATIA and PLM Systems (preferably Teamcenter)
• 5 years of experience working with GD&T
• Very familiar with aircraft production and assembly methods
• BS Mechanical or Aerospace Engineering
• Experience with Composite materials a Plus
 
Job Number: 28-016
Job Location: Greensbo, NC
Rate: $48-$60 DOE
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 12/18/2017
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer

Description:
Position requires expertise and experience in design of rotating equipment including bearing analysis (A.B.Jones), spur and bevel gear design and analysis (AGMA), aluminum castings and lubrication and cooling systems. Minimum of 2000 hours experience with Pro/E\Creo (Pro/E\Creo preferred) or CATIA is necessary. Working knowledge of Geometric Dimensioning and Tolerancing is a requirement. Experience in mechanical system integration and development. Analytical knowledge of Reliability, FEA, Nastran and Six Sigma are desirable. Familiarity with formal Qualification Standards such as DO160, MIL-STD-810 or EUROCAE ED-14 is desirable. Job function requires timely preparation of all associated engineering documentation including but not limited to Project Plans, Test Plans and Engineering Changes.

Benefits:
Relocatopm Bonus
Immediate Health Benefits
401k
Tuition Reimbursement
Stock Purchase
 
Job Location: Park City, UT
Input Date: 10/25/2017
Firm Name: APA SERVICES
Attention: Kami Muehlberger
Address: 4150 INTERNATIONAL PLZ STE 510
City, State: FORT WORTH, TX 76109
800 Phone: 888/272-7868
Fax Phone: 800/285-8805
Website: www.apaservices.net

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer

Description:
Design Engineer
 
Location: Plymouth, MI
Duration: 12 months
 
Description:
Client is a global leader in automotive seating. With 75,000 employees operating in 230 manufacturing/assembly plants in 33 countries worldwide, we produce and deliver automotive seating for all vehicle classes and all major OEMs. From complete seating systems to individual components, our expertise spans every step of the automotive seat-making process. Our integrated, in-house skills allow us to take our products from research and design all the way to engineering and manufacturing – and into more than 25 million cars every year.
 
Overview:
An engineer in product design with good communication skills to work on vehicle Seat Metals and Mechanisms. The engineer will be responsible for designing seat mechanisms and structures for the program and/or product and must demonstrate the ability to plan, organize and deliver engineering program
 
Core Responsibilities:
- Executing robust designs, manufacturing feasibility, high quality on drawing releases, prototype parts and production parts.
-  Help solve design issues by utilizing the Basic Engineering Process (BEP) process and his knowledge of lean engineering. Complete A3's which were presented in weekly and executive design reviews for these issues.
-  Help prepare documentation and gather data for engineering xSO signoff. Exposure to the product development process and interact with Subject Matter Technical Experts (SMTEs) throughout the assignment.
-  Support issue resolution and on-time execution for DV & PV testing phases by coordinating test timing, seat builds, and teardowns. This exposure allows for acquisition of knowledge in seat regulations, strength, durability, and tactical planning.
-  Support customer and DV/PV test builds here in Plymouth. Exposure to Design For Assembly and Manufacturing (DFAM) principles. Gain understanding of the interaction between design and manufacturing in product development and key cost drivers.
-  Acquire knowledge in Design for Cost to evaluate various engineering design changes in CAD while at the same time understanding the cost impact of those changes. This enables the team to assess the impact of changes in the ideation phase while still understanding a high level cost impact of those changes.
 
Additional Responsibilities:
-  Balancing multiple requirements from differing internal functional groups, Subject matter Experts and the customer to find optimized technical solutions to meet objectives such: as costs, performance, timing and launch.
 
Basic Qualifications:
-  Completed a 4 year B.S. degree in Mechanical or Electrical Engineering (not looking for recent Master's graduates).
-  CAD experience – Proficient in CATIA v5 with 5 years' minimum experience.
-  The engineer needs to have good analytical skills and work effectively with customers / suppliers and the development team.

If interested then please send updated resume at ravi@iconma.com
 
Job Number: 17-16587
Job Location: Plymouth, MI
Input Date: 10/02/2017
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 1201 PACIFIC AVE STE 600
City, State: TACOMA, WA 98402
Phone: 253/213-2012
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer (Mobile Test Equipment Support)

Description:
Role: Design Engineer (Mobile Test Equipment Support)
Location: Torrance, CA
Duration: Full Time/Direct hire

Role Description:
As the Design Engineer for Global Mobile Test Equipment (TE) support you’ll be a primary motivator and contributor to deploying our TE Systems at various customers around the world, upgrading them when needed, maintaining them under service contracts, and building intimate customer relationships on the front line. At your home base, you will perform the analysis, conceptual design, development, and testing of complex control test equipment used on many military, and commercial aircraft components. Many new applications will require a special, tailored design, even though adaptation of existing designs always should be considered where appropriate.

Responsibilities:
• Travel to many customer facilities around the world, install test equipment and troubleshoot customer issues
• Perform upgrades and maintenance of our TE, keeping it in top operating condition and visually appealing
• Develop strong relationships with the customers and users of the TE
• Identify sales opportunities while on travel for clients sales engineers to pursue
• Build project plans for the successful testing of new products from start to finish.
• Conceptualize and design automatically controlled mechanical/hydraulic test rigs.
• Operate either independently or as part of a design/development team, which includes other Department engineers
• Be concerned with system or component performance and integration, both being achieved within budget and prescribed schedules
• Coordinate the work of drafters, technicians, designers, analysts, manufacturing engineers and others who assist in specific assignments
• Communicate with the involved Division support personnel, keeping them informed of progress and educating them on the operation and performance of the design
• Possibly provide direct supervision of up to four subordinate engineers and/or project or product-engineering technicians. This would include setting their workload and priorities, counseling and conducting performance appraisals.

Required experience/Skills
• 5 + years of experience with design, analysis, and development of complex electro-hydraulic, electro-mechanical, or electro-pneumatic servo-mechanisms for mechanical and hydraulic test rigs.
• Hands-on integration and troubleshooting experience preferred.
• A proven record of successful development programs working as a part of a project team
• Experience in the areas of Requirements Definition, Integration, V&V, modeling & simulation with project management.
• Since this individual will often be seen by customers as the responsible technical representative of the company, you must be able to communicate fluently to a wide variety of audiences.
• Interpersonal skills are important in this role

Education:
• Bachelor of Science’s degree in Mechanical Engineering, probably an advanced degree


Please share resumes to avasanta@butler.com. Thanks
 
Job Number: 52515
Job Location: Torrance, CA
Rate: open
Per Diem: no
Overtime: possible
Duration: full time / direct hire
Start Date: asap
Input Date: 10/12/2017
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Arun
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Level 3

Description:
Location: Canoga Park, CA
Rate: $40.00 - $45.00/HR
Duration: 6 month contract

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
** Candidates must have significant experience with Creo and GD&T (Geometric Dimensioning & Tolerancing). Windchill experience strongly preferred **

** 6 years minimum of related experience as technical Design Engineer in rocket propulsion hardware or equivalent, and 6 years minimum of related experience as technical Designer using ProE/Creo CAD systems **

** Knowledge in the design of high pressure cryogenic, ambient and high temperature rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware is preferred **

Design Engineer - Must be able to create or modify designs of liquid rocket propulsion hardware associated to high pressure and high temperature static structures, combustion systems and high pressure valve systems.

•Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
•Applies research to the planning design, development and testing of rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware.
•Applies theories of heat and energy transfer to create practical solutions to technical problems
•Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
•Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.

Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.

Skills:
- Candidates must have significant experience with Creo & GD&T. Higher level certifications are preferred.
- Winchill experience strongly preferred.
- Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
- Engineers are also required to analyze and verify product design and performance for adequacy and reliability.
- Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
- Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
- Must be able to prepare and make presentations at both internal and customer design reviews.

Education:
- BS degree in an Engineering field or equivalent. MS degree is desired.
 
Job Number: 8029
Job Location: Canoga Park, CA
Rate: $40.00 - $45.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 01/16/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Level 3 CREO CA

Description:
Job Title: Design Engineer - Level 3

Number of Positions: 5

Remaining Positions: 5

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** Candidates must have significant experience with Creo and GD&T (Geometric Dimensioning & Tolerancing). Windchill experience strongly preferred **



** 6 years minimum of related experience as technical Design Engineer in rocket propulsion hardware or equivalent, and 6 years minimum of related experience as technical Designer using ProE/Creo CAD systems **



** Knowledge in the design of high pressure cryogenic, ambient and high temperature rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware is preferred **





Design Engineer - Must be able to create or modify designs of liquid rocket propulsion hardware associated to high pressure and high temperature static structures, combustion systems and high pressure valve systems.



Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
Applies research to the planning design, development and testing of rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware.
Applies theories of heat and energy transfer to create practical solutions to technical problems
Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.
Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.



Skills:
Candidates must have significant experience with Creo & GD&T. Higher level certifications are preferred.

Winchill experience strongly preferred.

Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.

Engineers are also required to analyze and verify product design and performance for adequacy and reliability.

Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.

Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.

Must be able to prepare and make presentations at both internal and customer design reviews.

Education:
BS degree in an Engineering field or equivalent. MS degree is desired.

Skills:
Required

AEROSPACE DESIGN CREO GEOMETRIC DIMENSIONING GEOMETRIC TOLERANCING WINDCHILL

State/Province: California
City/Town: Canoga Park

Start Date: 11/06/2017 Hours Per Week: 40.00
Est. End Date: 06/30/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7455592
Job Location: Canoga Park, CA
Rate: 45/hr max
Duration: 7 month contract
Input Date: 01/16/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Level 4

Description:
Location: Canoga Park, CA
Rate: $55.00 - $65.00/HR
Duration: 6+ month contract

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
**Candidates must have significant experience with Creo and GD&T (Geometric Dimensioning & Tolerencing). Windchill experience strongly preferred**

** 10 years minimum of related experience as technical Design Engineer in rocket propulsion hardware or equivalent, and 10 years minimum of related experience as technical Designer using ProE/Creo CAD systems **

** Knowledge in the design of high pressure cryogenic, ambient and high temperature rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware is preferred **

Design Engineer - Must be able to create or modify designs of liquid rocket propulsion hardware associated to high pressure and high temperature static structures, combustion systems and high pressure valve systems.

- Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
- Applies research to the planning design, development and testing of rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware.
- Applies theories of heat and energy transfer to create practical solutions to technical problems
- Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
- Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.

Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.

Skills:
- Candidates must have significant experience with Creo & GD&T.
- Higher level certifications are preferred.
- Windchill experience strongly preferred.
- Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
- Engineers are also required to analyze and verify product design and performance for adequacy and reliability.
- Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
- Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
- Must be able to prepare and make presentations at both internal and customer design reviews.

Education:
- BS degree in an Engineering field or equivalent.
- MS degree is desired.
 
Job Number: 8028
Job Location: Canoga Park, CA
Rate: $55.00 - $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6+ mos
Input Date: 01/17/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Level 4

Description:
Seeking a Design Engineer - Level 4 for an opening in Canoga Park, CA

RESPONSIBILITIES:
Must be able to create or modify designs of liquid rocket propulsion hardware associated to high pressure and high temperature static structures, combustion systems and high pressure valve systems.
Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost. Applies research to the planning design, development and testing of rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware. Applies theories of heat and energy transfer to create practical solutions to technical problems Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines. Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware. Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.

REQUIREMENTS
Candidates must have significant experience with Creo and GD&T (Geometric Dimensioning & Tolerencing). Windchill experience strongly preferred.
10 years minimum of related experience as technical Design Engineer in rocket propulsion hardware or equivalent, and 10 years minimum of related experience as technical Designer using ProE/Creo CAD systems Knowledge in the design of high pressure cryogenic, ambient and high temperature rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware is preferred.
Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
Engineers are also required to analyze and verify product design and performance for adequacy and reliability.
Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
Must be able to prepare and make presentations at both internal and customer design reviews.

EDUCATION
BS degree in an Engineering field or equivalent. MS degree is desired.

WORK SCHEDULE
5/40, 1st shift. Must be ok with some OT.
 
Job Number: 165618
Job Location: Canoga Park, CA
Duration: 10 Months
Start Date: ASAP
Input Date: 10/05/2017
Firm Name: CHIPTON ROSS
Attention: Debbie Aubert
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Level 4 CREO / BS required URGENT CA

Description:
7455575
Job Title: Design Engineer - Level 4
60-65/hr max

Number of Positions: 15

Remaining Positions: 5

Please note that a BS degree is required.

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** Candidates must have significant experience with Creo and GD&T (Geometric Dimensioning & Tolerencing). Windchill experience strongly preferred.



** 10 years minimum of related experience as technical Design Engineer in rocket propulsion hardware or equivalent, and 10 years minimum of related experience as technical Designer using ProE/Creo CAD systems **



** Knowledge in the design of high pressure cryogenic, ambient and high temperature rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware is preferred **


Creo
GD&T
5+ years “Design” experience, however drafting skills a plus
BS in Engineering or related field
Prefer: Windchill, and Rocket Design experience.



Design Engineer - Must be able to create or modify designs of liquid rocket propulsion hardware associated to high pressure and high temperature static structures, combustion systems and high pressure valve systems.

Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
Applies research to the planning design, development and testing of rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware.
Applies theories of heat and energy transfer to create practical solutions to technical problems
Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.
Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.



Skills:
Candidates must have significant experience with Creo & GD&T. Higher level certifications are preferred.
Winchill experience strongly preferred.
Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
Engineers are also required to analyze and verify product design and performance for adequacy and reliability.
Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
Must be able to prepare and make presentations at both internal and customer design reviews.

Education:
BS degree in an Engineering field or equivalent. MS degree is desired.


Skills:
Required

AEROSPACE DESIGN CREO GEOMETRIC DIMENSIONING GEOMETRIC TOLERANCING WINDCHILL


State/Province: California
City/Town: Canoga Park


Start Date: 11/06/2017 Hours Per Week: 40.00
Est. End Date: 09/30/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7455575
Job Location: Canoga Park, CA
Rate: 60-65/hr max
Duration: 10 month contract
Input Date: 01/29/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Mechanical

Description:
SKILLS AND KNOWLEDGE:
• Ability to solve practical problems and deal with variables in an environment where limited standardization exists.
• Must be adaptable and flexible at all times and apply knowledge and skills to develop creative solutions to a wide variety of unique design, modification, and repair problems encountered.
• Strong PC skills will include e-mail, word processing, spreadsheet, communications, operating systems, and advanced computer drafting skills.
• Ability to accomplish basic stress analysis and substantiation for complex repairs or modifications using standard accepted industry practices and other structural design methodologies.
• Ability to understand regulatory requirements for airworthiness, for the FAA and various foreign authorities (JAA, JAR, CAA, DGAC, CAAC, etc.) and include in engineering documents, drawings and designs.
• Ability to understand and promote the policies / procedures of company and company Engineering.
• Ability to understand and apply the policies / procedures of all customer(s).
• Ability to understand and apply information from Structural Repair Manuals (SRMs), Aircraft Maintenance Manuals (MMs), Illustrated Parts Catalogs (IPCs), Service Bulletins (SBs) and other aircraft reference materials.
• Ability to interpret and use aircraft manufacturing, assembly, and installation drawings.
• Assertive communication skills are required.
 
Job Location: Everett, WA
Input Date: 10/03/2017
Firm Name: APA SERVICES
Attention: Kami M Muehlberger
Address: 4150 INTERNATIONAL PLZ STE 510
City, State: FORT WORTH, TX 76109
800 Phone: 888/272-7868
Fax Phone: 800/285-8805
Website: www.apaservices.net

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Test Equipment

Description:
Design Engineer - Test Equipment

Direct Hire

Torrance, CA




Responsibilities include:
•Designing equipment for the successful testing of complex electrohydraulic, electromechanical, mechanical, hydromechanical and electropneumatic components and systems that will become the new product.
•Plan and conduct efforts requiring judgment in the independent evaluation, selection, and substantial adaptation and modification of standard engineering techniques, procedures, and criteria.
•Devise new approaches as while our products are similar, each one is different enough that it requires different testing mechanisms.
•Be a key contributor to the analysis, conceptual design, development, and testing of complex control hardware used on military, commercial and NASA vehicles and equipment. (The products are generally unique for each customer. Therefore, most new applications require a special, tailored design, even though adaptation of existing designs always should be considered where appropriate.)
•Will operate as part of a design/development team, which includes other department engineers with his/her primary concern being component design.
•Must effectively coordinate the work of drafters, technicians, and others who assist in specific assignments.
•Must have self starting instincts and strong analytical skills.
•Requires some travel and the participation in presentations to customers.


***In the early stages of a new program, the project team will consult with the customer, establish the problem statement, conceive of potential hardware solutions to the problem, often through extensive trade studies, and then create a successful technical proposal. This phase is critical in that it establishes the basis for future design, and for contract negotiations. Under the technical direction of the Engineering Manager, Section Head or the team's lead engineer, the design engineer will then guide the evolution of the conceptual design, technical project planning, detail design, and development testing.
•Contribute to the development of new product requirements through consulting with customers and sales personnel.
•Validate conceptual problem solutions by performing trade studies and analyses.
•Be a key contributor to the preparation of successful proposal designs, cost estimates, and technical volume write ups.
•Operate as a key element in a team of creative, independent individuals.
•Represent company in a manner consistent with its technical reputation.
•Create reliable designs through a comprehensive experimental development test program.
•Document designs, analyses, and test results with accurate and concise reports.



Education:

BS Degree in Mechanical Engineering, plus six years minimum of design/development engineering experience.

Please send resume to bnorman@butler.com
 
Job Number: 52514
Job Location: Torrance, CA
Duration: FTE
Start Date: ASAP
Input Date: 10/12/2017
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Becky Norman
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Test Equipment - direct hire CA

Description:
4984
Job title: Design Engineer - Test Equipment

Number of openings: 1
Job type: Engineering/IT/Professional
Position location: Torrance - CA
Employment type: Direct
OT exempt: No


Shift: 1st
Education Requirement: MS/MA
Driving on company time?: No
Maximum Hourly Pay Rate: 65
Start Date: 10/30/2017
Tentative End Date: 10/30/2018

Job Description

Function: As a Design Engineer - Test Equipment, you'll be responsible for designing equipment for the successful testing of complex electrohydraulic, electromechanical, mechanical, hydromechanical and electropneumatic components and systems that will become the new products of Moog. Leveraging your experience you'll plan and conduct efforts requiring judgment in the independent evaluation, selection, and substantial adaptation and modification of standard engineering techniques, procedures, and criteria. Typically, the Design Engineer devises new approaches as while our products are similar, each one is different enough that it requires different testing mechanisms.

You'll be a key contributor to the analysis, conceptual design, development, and testing of complex control hardware used on military, commercial and NASA vehicles and equipment. The products of Moog generally are unique for each customer. Therefore, most new applications require a special, tailored design, even though adaptation of existing designs always should be considered where appropriate. You'll generally will operate as part of a design/development team, which includes other Department engineers with his/her primary concern being component design. You must effectively coordinate the work of drafters, technicians, and others who assist in specific assignments.

As you can see, this job will take advantage of knowledge and experience and keep you challenged.

In the early stages of a new program, the project team will consult with the customer, establish the problem statement, conceive of potential hardware solutions to the problem, often through extensive trade studies, and then create a successful technical proposal. This phase is critical in that it establishes the basis for future design, and for contract negotiations. Under the technical direction of the Engineering Manager, Section Head or the team's lead engineer, you'll then guide the evolution of the conceptual design, technical project planning, detail design, and development testing. This requires some travel and the participation in presentations to customers.

Essential job functions:
1. Contribute to the development of new product requirements through consulting with customers and sales personnel.
2. Validate conceptual problem solutions by performing trade studies and analyses.
3. Be a key contributor to the preparation of successful proposal designs, cost estimates, and technical volume write ups.
4. Operate as a key element in a team of creative, independent individuals.
5. Represent Moog in a manner consistent with its technical reputation.
6. Create reliable designs through a comprehensive experimental development test program.
7. Document designs, analyses, and test results with accurate and concise reports.

Required skills:
• As an alternative, you would have a BS Degree in Mechanical Engineering plus six years minimum of design/development engineering experience.
• To fulfill the demands of design and development of new products you must have self starting instincts and strong analytical skills.

A Mechanical Design Engineer should have a good sense of three dimensional spatial orientation and seasoned knowledge of mechanical hardware design. An Electrical Design Engineer should have solid knowledge of circuit design and a wide range of electrical components.


Education: Minimum of an MS Degree,in Mechanical, Engineering plus three years of design/development engineering experience.

Other Requirements
This is a Direct Placement Request.
 
Job Number: JE-4984
Job Location: Torrance, CA
Rate: 65/hr max
Duration: DIRECT HIRE
Input Date: 10/30/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer II / Creo and GD&T Windchill CA

Description:
7457180
Job Title: Design Engineer II

Duties: ** Candidates must be U.S. Citizens **** Permanent residents are NOT eligible for this role **** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Design and Development Engineer - Must be able to specify valve type, valve trim configuration, material and seal packings for liquid rocket engine systems.

Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.

Applies research to the planning design Development and testing of valves, actuators and associated hardware Applies theories of heat and energy transfer to create practical solutions to technical problems Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.

Majority of work will be to develop and maintain valve layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.

Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level reqmts to component level reqmts. Conduct trade studies and develop schedules, test plans, component specifications and procedures.

Skills: -Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
-Engineers also required to analyze and verify product design and performance for adequacy and reliability.
-Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
-Must be able to interface well with other members of project or program team. management, and technical staff to define ind implement engineering solutions to meet group, organization, and company objectives.
-Must be able to prepare and make presentations at both internal and customer design reviews.

Education: -BS degree in Engineering or equivalent. MS degree is desired.

Skills and Experience:
Required Skills:
CREO
GEOMETRIC DIMENSIONING
GEOMETRIC TOLERANCING
WINDCHILL
AEROSPACE DESIGN

# of Positions: 2

Location:
Canoga Park, CA

Start Date: 11/06/2017
Estimated End Date: 05/06/2018
Hours Per Week: 40.00
Hours Per Day: 8.00

Schedule Notes: Regular 40 hour week. OT possible.
 
Job Number: MB-7457180
Job Location: Canoga Park, CA
Rate: 40/hr max
Duration: 6 month contract
Input Date: 11/01/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer IV - Creo

Description:
Duties:

Must be able to create or modify designs of liquid rocket propulsion hardware associated to high pressure and high temperature static structures, combustion systems and high pressure valve systems.
Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
Applies research to the planning design, development and testing of rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware.
Applies theories of heat and energy transfer to create practical solutions to technical problems
Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.
Activities:

Conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements.
Conduct trade studies and develop schedules, test plans, component specifications and procedures.
Skills:

Candidates must have significant experience with Creo & GD&T.
Higher level certifications are preferred.
Winchill experience strongly preferred.
Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
Engineers are also required to analyze and verify product design and performance for adequacy and reliability.
Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
Must be able to prepare and make presentations at both internal and customer design reviews.
Education:

BS degree in an Engineering field or equivalent. MS degree is desired.

KEY SKILLS:

Candidates must have significant experience with Creo and GD&T (Geometric Dimensioning & Tolerencing). Windchill experience strongly preferred.
10 years minimum of related experience as technical Design Engineer in rocket propulsion hardware or equivalent, and 10 years minimum of related experience as technical Designer using ProE/Creo CAD systems
Knowledge in the design of high pressure cryogenic, ambient and high temperature rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware is preferred
 
Job Number: 377107
Job Location: SEATTLE, WA
Duration: 10 months
Start Date: asap
Input Date: 10/10/2017
Firm Name: CDI CORPORATION
Attention: Jonathan Oleson
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer for Global Mobile Test Equipment Support - direct hire CA

Description:
Request number: 4985
Job title: Design Engineer for Global Mobile Test Equipment Support

Number of openings: 1
Job type: Engineering/IT/Professional
Position location: Torrance - CA
Employment type: Direct
OT exempt: No


Shift: 1st
Education Requirement: BS/BA


Driving on company time?: No
Minimum Years of Experience:
Maximum Hourly Pay Rate: 65
Start Date: 10/30/2017
Tentative End Date: 10/30/2018

Job Description

Function: As the Design Engineer for Global Mobile Test Equipment (TE) support you’ll be a primary motivator and contributor to deploying our TE Systems at various customers around the world, upgrading them when needed, maintaining them under service contracts, and building intimate customer relationships on the front line. At your home base, you will perform the analysis, conceptual design, development, and testing of complex control test equipment used on many military, and commercial aircraft components. Many new applications will require a special, tailored design, even though adaptation of existing designs always should be considered where appropriate.
Essential job functions: • Travel to many customer facilities around the world, install test equipment and troubleshoot customer issues
• Perform upgrades and maintenance of our TE, keeping it in top operating condition and visually appealing
• Develop strong relationships with the customers and users of the TE
• Identify sales opportunities while on travel for Moog's sales engineers to pursue
• Build project plans for the successful testing of new products from start to finish.
• Conceptualize and design automatically controlled mechanical/hydraulic test rigs.
• Operate either independently or as part of a design/development team, which includes other Department engineers
• Be concerned with system or component performance and integration, both being achieved within budget and prescribed schedules
• Coordinate the work of drafters, technicians, designers, analysts, manufacturing engineers and others who assist in specific assignments
• Communicate with the involved Division support personnel, keeping them informed of progress and educating them on the operation and performance of the design
• Possibly provide direct supervision of up to four subordinate engineers and/or project or product-engineering technicians. This would include setting their workload and priorities, counseling and conducting performance appraisals.
Required skills: • 5 + years of experience with design, analysis, and development of complex electro-hydraulic, electro-mechanical, or electro-pneumatic servo-mechanisms for mechanical and hydraulic test rigs. Hands-on integration and troubleshooting experience preferred.
• A proven record of successful development programs working as a part of a project team
• Experience in the areas of Requirements Definition, Integration, V&V, modeling & simulation with project management.
• Since this individual will often be seen by customers as the responsible technical representative of the company, you must be able to communicate fluently to a wide variety of audiences.
• Interpersonal skills are important in this role
• US Citizen/Permanent resident
Scope:
Education: • Bachelor of Science’s degree in Mechanical Engineering, probably an advanced degree

Other Requirements
This is a Direct Placement Request.
 
Job Number: JE-4985
Job Location: Torrance, CA
Rate: 65/hr max
Duration: DIRECT HIRE
Input Date: 10/23/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Level 2

Description:
Location: Canoga Park, CA
Rate: $35.00 - $40.00/HR
Duration: 6 month contract


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:
Design and Development Engineer - Must be able to specify valve type, valve trim configuration, material and seal packings for liquid rocket engine systems.
•Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
•Applies research to the planning design Development and testing of valves, actuators and associated hardware
•Applies theories of heat and energy transfer to create practical solutions to technical problems
•Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.

Majority of work will be to develop and maintain valve layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.

Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level reqmts to component level reqmts. Conduct trade studies and develop schedules, test plans, component specifications and procedures.

Skills:
-Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
-Engineers also required to analyze and verify product design and performance for adequacy and reliability.
-Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
-Must be able to interface well with other members of project or program team. management, and technical staff to define ind implement engineering solutions to meet group, organization, and company objectives.
-Must be able to prepare and make presentations at both internal and customer design reviews.


Education:
-BS degree in Engineering or equivalent. MS degree is desired.
 
Job Number: 8032
Job Location: Canoga Park, CA
Rate: $35.00 - $40.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 11/10/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Development Engineer - Liquid Fuel Engines

Description:
Job Title: Design and Development Engineer - Liquid Fuel Engines
Location: Canoga Park, CA
Contact Duration: 6+ months
Pay Rate: $40/hr

Special Requirements

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



Design and Development Engineer

Must be able to specify valve type, valve trim configuration, material and seal packings for liquid rocket engine systems.
Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
Applies research to the planning design Development and testing of valves, actuators and associated hardware Applies theories of heat and energy transfer to create practical solutions to technical problems
Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
Majority of work will be to develop and maintain valve layouts, designs/CAD models,and drawings using Creo2 graphicssystem for liquid engine hardware.
Activities:

Conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration,fabrication process identification, synthesis of higher level reqmts to component level reqmts.
Conduct trade studies and develop schedules, test plans, component specifications and procedures.
Skills:

Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
Engineers also required to analyze and verify product design and performance for adequacy and reliability.
Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
Must be able to interface well with other members of project or program team, management, and technical staff to define ind implement engineering solutions to meet group, organization, and company objectives.
Must be able to prepare and make presentations at both internal and customer design reviews.
Education:

BS degree in Engineering or equivalent. MS degree is desired.
 
Job Number: 377118
Job Location: Canoga Park, CA
Rate: $40 / hour
Per Diem: No
Overtime: Yes
Duration: 6+ months
Start Date: ASAP
Input Date: 10/10/2017
Firm Name: CDI CORPORATION
Attention: Jason Greer
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Designer/Drafter

Description:
Associates Degree or other 2 year technical degree in related discipline and 1 year of related experience. Job Description: Designs components or portions of systems and modifies existing designs to develop or improve products and facilitate manufacturing operations. Utilizes computer-aided design equipment and/or graphic tools such as, CAD, CAM or Ship Constructor. Gathers information, makes studies, computes calculations, and prepares original rough layouts, sketches to present design proposal. Coordinates design criteria with engineering, manufacturing, tooling, material, and planning group such as ease of manufacture, availability of materials, and contractual specifications. Exclude classifications in which incumbents predominantly perform drafting assignments. Successful candidate will possess an extensive knowledge in specialized functions and a wide and comprehensive acquaintance with, and understanding of, both general and specific aspects of the job and their practical application to complex problems and situations ordinarily encountered. Successful candidate will be able to work with minimal supervision. Work may be done without established procedures. May assist in orienting, training, assigning and checking the work of lower level employees and will often be designated as lead worker. Typical duties and tasks are varied and complex. Serves as a resource to others in the resolution of problems and issues. Contacts are frequent with individuals representing outside organizations, and/or individuals of significant importance within the company. Contacts involve planning and preparation of the communications, require skill, tact, persuasion and/or negotiation to accomplish the objectives of the communication. Specific duties for Fleet Sustainment Engineering include but are not limited to the development and implementation of Ship Change Documents (SCDs), initiation, development, and review of technical drawings, processing of change paper, supporting technical analyses of mechanical systems, supporting preparation of special studies, and cognizance of specific marine systems and ship alterations.
 
Job Number: 21
Job Location: Mobile, AL
Rate: Hourly
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 10/09/2017
Firm Name: NATIONWIDE SKILLED TRADES
Attention: Dalia
Address: P O BOX 1270
City, State: HOUMA, LA 70361
Phone: 251/287-2949
Website: www.nationwideskilledtrades.com

Director, Training & Flight Operations

Description:
Legacy Engineering, a division of PDS Tech, is seeking candidates for Director, Training & Flight Operations, Customer Support Division for the Regional Jet Development Program. 
This position is located in Nagoya, Japan.  

In this role, you will be responsible for the development and delivery of Regional Jet Customer training, flight manuals and flight operations engineering support. 



  • Training services include the development of courseware, training devices, training manuals and delivery of initial and recurrent training for Pilots, Technical/Mechanics, Cabin Crews, Ground Servicing Crews, and Dispatchers within an airline. In addition, this person must manage the relationship and performance of CAE, the Company's selected training service provider. 
  • Development, verification/validation and certification of flight operations manuals
  • Flight Operations Engineering support to Company's customers


Responsibilities include establishing deliverable commitments, establishing work priorities, creating and managing the development process, creating the team and team structure, implementing governance and communication processes, and evaluating the performance of the group.


Work Location
The Primary Work Location will be Nagoya, Japan.  Travel to USA or other country will be required.

Scope of Work
Specific Training responsibilities include:

  • Overall management of the relationship with and performance of CAE, Company’s training services provider, ensuring training devices and services are high quality at market prices
  • Development and maintenance of training curriculum and courseware for pilots, technicians/mechanics, flight attendants, and flight planning engineers, and ground handling services
  • Development and maintenance of training documentation for each course offered
  • Ensure there are sufficient qualified training instructors located at training delivery sites for the life of the aircraft
  • Ensure training devices (e.g., Full Flight Simulators (FFS), Integrated Procedures Trainers (IPT), Virtual Maintenance Trainers (VMT), Computer Based Training (CBT), Door Trainer and Cabin Trainers) & training facilities meet training objectives and are certified (where applicable) by regulators
  • Obtain regulator certifications such as OSD, FSB, etc.
  • Commitment of training services (both proforma and for fee) to customers as part of the airplane sales process
  • Scheduling customer training at a location that minimizes customer travel costs, meets customer requirements for timing (schedule), and fits within the Company's Training Program strategy.

 
Specific Flight Operations Support responsibilities include:

  • Define the process interfaces with Flight Test organization, Pilot organization and Flight operation engineering organization. 
  • Development, verification/validation, maintenance and delivery of all technical and administrative documents in support of customer’s flight operations.
    • Airplane Flight Manual (AFM)
    • Flight Crew Operating Manual (FCOM)
    • Quick Reference Handbook (QRH)
    • Weight & Balance Manual (WBM)
    • Master Minimum Equipment List (MMEL)
    • Dispatch Deviation Guide (DDG)
    • Flight Crew Training Manual (FCTM)
    • Cabin Crew Operating Manual (CCOM)
    • Aircraft Characteristics for Airport Planning (AC)



  • Ensure documents meet industry standards for content and format by participating in and influencing industry standards board that define flight operations documentation requirements
  • Create airplane performance databases and may provide specialized training courses to customers to assist them in their understanding and use of the airplane and documents listed above.  Such courses may include:
    • Performance Engineers course
    • Weight & Balance course

  • Review and approve requests from airlines for non-normal operations such as flight with missing secondary structure
  • Respond to Flight Operations related Customer Service Requests.  Utilize the Safety Process for emergent Flight Operations related Safety issues.
  • Prepare and Release Flight Operations Bulletins.  MITAC must define both a Routine bulletin type as well as an Alert bulletin type to correspond to the Maintenance related Service Bulletins
  • Define a change process that addresses Flight Operations related changes that may impact the certification basis of the airplane (e.g. Airplane Flight Manual)

Expected Education/Experience and Skills:



  1. Qualified candidates must hold an engineering degree from an accredited Engineering School.
  2. Candidates must have worked in commercial aerospace for an Original Equipment Manufacturer (OEM), and have 5 or more years in managerial positions providing Training and/or Flight Operations management functions to commercial airline customers.
  3. Commercial pilots license preferred.
  4. Candidates must have skills and experience managing Partners and Suppliers.

 
Job Number: 1710068573
Job Location: Nagoya,
Duration: 36 months
Input Date: 05/25/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002JqSMAA0&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Drafting Checker (aerospace)

Description:
Drafting Checker
Greensboro, NC: location
Duration: 9+ months
contract rate: DOE

Job Summary
Design Checker
Desired Skills
ROBOTICS;CATIA;Design Checker
Job Description Rich
 
General Summary: 
Review Engineering Design Documentation consisting of Drawing, Engineering Order and Parts List for consistency with company standards, drawing quality and drafting requirements. Also review 3D dataset to ensure correct design representation in the Digital Aircraft model.
 
Duties and Responsibilities:
1.     Check Drawing, Engineering Order and Parts List for adherence to company standards;
2.     Check 3D dataset in CATIA V5 and PLM System.
3.     Participate to design reviews and provide guidance to design team regarding drafting rules and dimension & tolerance requirements.
4.     Collaborate with Design and Integrated Product Teams to solve issues identified during the reviews.
5.     Document and communicate issues found during reviews.
6.     Consult with design team and other checkers for interpretation or drafting rules.
7.     Act as a Subject Matter Expert regarding interpretation and application of drafting rules.
8.     Provide inputs to management on major issues being identified and help develop alternatives for solutions.
 
Education, Work Experience, Certification and/or Licensure:
1.     10+ years of experience designing mechanical and / or structural parts, assemblies or installations for aircraft.
2.     At least 7 years of experience with CATIA and PLM Systems (preferably Teamcenter).
3.     5 years of experience working with GD&T and 5 years of experience checking Aerospace Drawings.
4.     Candidate must be detail oriented.
5.     BS Mechanical or Aerospace Engineering.  Experience can used in lieu of education.
6.     Experience with composite materials is a plus.
 
Knowledge, Skills and Abilities:
1.     Familiarity with aircraft production and assembly methods.
2.     Ability to address issues identified in a direct but respectful way.
3.     Ability to consistently apply defined criteria.
4.     Able to work with people with diverse corporate / design culture background.
Physical Requirements:
1.     Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
2.     Incumbents may be required to sit, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
3.     Incumbents may be required to stand, sit, squat, walk, bend, climb ladders, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
4.     Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
5.     Read, hear, speak, and see with no restrictions, as required by job duties.
6.     Comprehend and adhere to management directions and/or safety instructions with no restrictions.
7.     Effectively communicate in Business English language.
8.     Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.
9.     Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties.  
 
 
Notes
401K
6 paid holidays
Annual bonus

The Structures Company LLC is an AA/EOE.
 
Job Location: Greensboro, NC
Rate: open
Per Diem: yes
Overtime: possible
Duration: 9_+ months
Start Date: asap
Input Date: 09/29/2017
Firm Name: STRUCTURES COMPANY LLC
Attention: Mark Sharp
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ECS Flammability

Description:
Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations

We are looking for an ECS Engineer with a focus on Flammability

Responsibilities:

Coordinate system test and certification requirements.
Author flight test and ground test specifications.
Support flight test and ground test activities.
Analyze test data and evaluate system operation.
Verifying Comportment ventilation and drain from the view point of fire marshal
Engine and APU Compartment Ventilation/Fire extinguisher from the viewpoint of fire marshal
Prepare test reports.
Domestic and occasional international travel is required.
Requirements:

Flammable Fluid Test, Report, Document, Design for company and certification
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

Candidates must have legal authorization to work in the United States, Canada or Mexico
 
Job Location: Seattle, WA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 10/06/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Certification Engineers - Wichita, KS

Description:
STS AeroStaff Services now offers Electrical Certification Engineer jobs in Wichita, Kansas.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Responsible for design, development and certification support of avionics/electrical systems on Beechcraft T-6C aircraft
• Prepare certification plans, conformity requests, equipment qualification test plans/results, system safety documents, ground and flight test plans/results and certification reports showing avionics systems compliance with 14 CFR Part 23
• Prepare engineering drawings for avionics/electrical systems using Mentor Graphics computer based drafting tool
• Assist in development of functional test documents for avionics/electrical systems
• Conduct equipment, system, and aircraft ground testing at Supplier or other testing facilities
• Coordinate with other Engineering disciplines such as Air Worthiness, Project, Flight Test, Aerodynamics, Propulsion, Mechanical Systems, ECS and System Safety

Qualifications:

• Candidate should be a graduate of an ABET accredited Engineering School culminating in a BS or MS degree in Electrical Engineering/Computer Engineering or Electrical/Electronic Engineering Technology
• Proficient in basic computer skills and in Microsoft Excel, Word and PowerPoint
• Strong written and verbal communication skills and competency in one of the subject areas listed above
• Knowledge of 14 CFR part 23, RTCA DO-160, DO-178 and DO-254 is required

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 38215
Job Location: Wichita, KS
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 09/28/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
Electrical Design Engineer


East Aurora, NY


12 month contract




GENERAL FUNCTION:

This position is responsible for development of complex electrohydraulic, electromechanical, mechanical, hydromechanical and electropneumatic components and systems. The incumbent, a fully trained professional, plans and conducts efforts requiring judgment in the independent evaluation, selection, and substantial adaptation and modification of standard engineering techniques, procedures, and criteria. Typically, the Design Engineer devises new approaches for the problems encountered.

DIMENSIONS:

Expected annual production sales from projects: $4M to $10M

NATURE AND SCOPE:

A variety of technical functions exist within the Design/Development Engineering Department. Reporting to the division's Chief Engineer typically are Associate Engineers, Development Engineers, Design and Project Engineers, Senior Design and Senior Project Engineers, Senior Staff Engineers, and Principal Engineers, as well as Engineering Managers, Section Heads or Group Leaders. The Design Engineer typically reports to an Engineering Manager, Section Head or Group Leader within the department and on demanding projects he/she might work under the leadership of a Senior Design Engineer. The incumbent receives instructions on specific assignment objectives, complex features, and possible solutions. He/She is expected to make independent and unreviewed decisions on routine technical matters. However, assistance is furnished on unusual problems and work is periodically reviewed for application of sound professional judgment.

The Design Engineer is a key contributor to the analysis, conceptual design, development, and testing of complex control hardware used on military, commercial and NASA vehicles and equipment. Therefore, most new applications require a special, tailored design, even though adaptation of existing designs always should be considered where appropriate. The Design Engineer generally will operate as part of a design/development team, which includes other Department engineers with his/her primary concern being component design. The incumbent must effectively coordinate the work of drafters, technicians, and others who assist in specific assignments.

In the early stages of a new program, the project team will consult with the customer, establish the problem statement, conceive of potential hardware solutions to the problem, often through extensive trade studies, and then create a successful technical proposal. This phase is critical in that it establishes the basis for future design, and for contract negotiations. Under the technical direction of the Engineering Manager, Section Head or the team's lead engineer, the Design Engineer will then guide the evolution of the conceptual design, technical project planning, detail design, and development testing. This requires some travel and the participation in presentations to customers.

The Design Engineer will apply creative skills to generate designs that fulfill the conflicting requirements of meeting performance goals, robustness over extreme conditions, minimum weight, awkward envelopes, and cost effectiveness. Successful mechanical designs require judicious material selection, effective use of stress analysis, and sometimes design of unique kinematic mechanisms. Successful electrical designs require intelligent component selection and effective use of thermal stress analysis. Circuit designs must be reliable and make optimal use of available space.




•To be considered for the position of Design Engineer, a candidate should have a minimum of an MS Degree, preferably in Mechanical,



•Aeronautical or Electrical Engineering plus three years of design/development engineering experience.
•As an alternative, the candidate would have a BS Degree plus six years minimum of design/development engineering experience.

To fulfill the demands of design and development of new products the individual must have self starting instincts and strong analytical skills. A Mechanical Design Engineer should have a good sense of three dimensional spatial orientation and seasoned knowledge of mechanical hardware design. An Electrical Design Engineer should have solid knowledge of circuit design and a wide range of electrical components.


Basic knowledge of closed loop control systems and good communication skills is also necessary.

ACCOUNTABILITIES:

1. Contribute to the development of new product requirements through consulting with customers and sales personnel.

2. Validate conceptual problem solutions by performing trade studies and analyses.

3. Be a key contributor to the preparation of successful proposal designs, cost estimates, and technical volume write ups.

4. Operate as a key element in a team of creative, independent individuals.

5. Represent Client in a manner consistent with its technical reputation.

6. Create reliable designs through a comprehensive experimental development test program.

7. Document designs, analyses, and test results with accurate and concise reports.




Please email your recent resume to tmcilrath@butler.com
 
Job Number: 52415
Job Location: East Aurora, NY
Per Diem: per diem split possible
Duration: 12 months
Input Date: 09/29/2017
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Taylor McIlrath
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer / circuit design / electrical components NY

Description:
Request number: 4959
Job title: Electrical Design Engineer

Number of openings: 2
Job type: Engineering/IT/Professional
Position location: East Aurora - NY
Employment type: Contract
OT exempt: No


Shift: 1st
Education Requirement: BS/BA

Driving on company time?: No
Minimum Years of Experience:
Maximum Hourly Pay Rate: 56
Start Date: 10/09/2017
Tentative End Date: 10/26/2018

Job Description

GENERAL FUNCTION:

This position is responsible for development of complex electrohydraulic, electromechanical, mechanical, hydromechanical and electropneumatic components and systems that will become the new products of Moog, Inc. The incumbent, a fully trained professional, plans and conducts efforts requiring judgment in the independent evaluation, selection, and substantial adaptation and modification of standard engineering techniques, procedures, and criteria. Typically, the Design Engineer devises new approaches for the problems encountered.

DIMENSIONS:

Expected annual production sales from projects: $4M to $10M

NATURE AND SCOPE:

A variety of technical functions exist within the Design/Development Engineering Department. Reporting to the division's Chief Engineer typically are Associate Engineers, Development Engineers, Design and Project Engineers, Senior Design and Senior Project Engineers, Senior Staff Engineers, and Principal Engineers, as well as Engineering Managers, Section Heads or Group Leaders. The Design Engineer typically reports to an Engineering Manager, Section Head or Group Leader within the department and on demanding projects he/she might work under the leadership of a Senior Design Engineer. The incumbent receives instructions on specific assignment objectives, complex features, and possible solutions. He/She is expected to make independent and unreviewed decisions on routine technical matters. However, assistance is furnished on unusual problems and work is periodically reviewed for application of sound professional judgment.

The Design Engineer is a key contributor to the analysis, conceptual design, development, and testing of complex control hardware used on military, commercial and NASA vehicles and equipment. The products of Moog generally are unique for each customer. Therefore, most new applications require a special, tailored design, even though adaptation of existing designs always should be considered where appropriate. The Design Engineer generally will operate as part of a design/development team, which includes other Department engineers with his/her primary concern being component design. The incumbent must effectively coordinate the work of drafters, technicians, and others who assist in specific assignments.

In the early stages of a new program, the project team will consult with the customer, establish the problem statement, conceive of potential hardware solutions to the problem, often through extensive trade studies, and then create a successful technical proposal. This phase is critical in that it establishes the basis for future design, and for contract negotiations. Under the technical direction of the Engineering Manager, Section Head or the team's lead engineer, the Design Engineer will then guide the evolution of the conceptual design, technical project planning, detail design, and development testing. This requires some travel and the participation in presentations to customers.

The Design Engineer will apply creative skills to generate designs that fulfill the conflicting requirements of meeting performance goals, robustness over extreme conditions, minimum weight, awkward envelopes, and cost effectiveness. Successful mechanical designs require judicious material selection, effective use of stress analysis, and sometimes design of unique kinematic mechanisms. Successful electrical designs require intelligent component selection and effective use of thermal stress analysis. Circuit designs must be reliable and make optimal use of available space.

To be considered for the position of Design Engineer, a candidate should have a minimum of an MS Degree, preferably in Mechanical, Aeronautical or Electrical Engineering plus three years of design/development engineering experience. As an alternative, the candidate would have a BS Degree plus six years minimum of design/development engineering experience. To fulfill the demands of design and development of new products the individual must have self starting instincts and strong analytical skills. A Mechanical Design Engineer should have a good sense of three dimensional spatial orientation and seasoned knowledge of mechanical hardware design. An Electrical Design Engineer should have solid knowledge of circuit design and a wide range of electrical components.

Basic knowledge of closed loop control systems and good communication skills is also necessary.

ACCOUNTABILITIES:

1. Contribute to the development of new product requirements through consulting with customers and sales personnel.

2. Validate conceptual problem solutions by performing trade studies and analyses.

3. Be a key contributor to the preparation of successful proposal designs, cost estimates, and technical volume write ups.

4. Operate as a key element in a team of creative, independent individuals.

5. Represent Moog in a manner consistent with its technical reputation.

6. Create reliable designs through a comprehensive experimental development test program.

7. Document designs, analyses, and test results with accurate and concise reports.


Other Requirements
Electrical design and analysis of a complex, multi-unit controller. Product is subject to radiation requirements and detailed reliability analyses including bent pin analysis, sneak circuit analysis, etc. Support of the electrical design, analysis, documentation, and manufacture as well as component selection, qualification, and documentation requirements.
 
Job Number: JE-4959
Job Location: East Aurora, NY
Rate: 56/hr max
Duration: 12 month contract
Input Date: 10/30/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Electrical Engineer

Location: Oshkosh, WI
Duration: 10+ months

Description:
BSEE degree required, not EET
Circuit/harness design, EMC (electro mechanical compatibility), trouble shoot vehicle electrical systems
Background as mechanic in military or auto repair helpful for troubleshooting

Perform engineering work of various types in the electrical design or re-design, and development of electrical systems into existing and new, medium and heavy-duty vehicles.
Exercise independent judgment and action.
Will require working closely with suppliers, engineering specialists, and other departments.
This person will provide resource estimates for project planning as well.
 
Job Location: Oshkosh, WI
Rate: Open
Per Diem: Yes
Overtime: Yes
Duration: 10 months
Start Date: Asap
Input Date: 10/19/2017
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
The candidate will work within an Integrated Product Development Team to support the design and development of various electronic controls; will work with the Project Engineer to execute project to meet schedule and budget milestones; and will collaborate with a wide variety of functional areas inside and outside the organization to ensure successful completion of program requirements. Candidate will have BS in Electrical Engineering with 4 years of working experience in the aerospace industry. Responsibilities • Coordinate Integrated Product Development Team activities (design, procurement, fabrication and test) • Assist Control Account Managers with Earned Value Management (EVMS) by monitoring program cost and schedule performance • Assist Control Account Manager with Estimate to Complete • Coordinate activities associated with review and approval of engineering specifications and engineering drawings • Initiate and process Engineering Changes working with all engineering disciplines to implement approved changes. This will include marking drawings, copying prints, creating PDF’s to support electronic Engineering Change process. • Coordinate, track and support the assembly and test of development hardware • Support supplier selection and part procurement • Provide status reports • Support program reviews both internal and external • Coordinate closure of action items • Support operations to fabricate, assemble, test and qualify flight hardware • Ensure standard work flow maps are complete • Document activities and programs worked with time spend on various activities. This information will be submitted weekly and summed monthly by person with the monthly invoice. Skills/Experience • Ability to perform as part of a cross-functional team and coordinate the activities of various engineering disciplines including electrical and mechanical design, systems, components, materials development, process development, and supplier development • Strong project management, organizational and prioritization skills • Ability to work independently or as part of an integrated product team • Able to understand electrical circuitry and able to recommend trouble shooting test steps to the stakeholders • Ability to read and understand technical manuals, blueprints or drawings • Prepare test plans, analyze test data, and prepare reports to support project activity, and maintain up-to-date records of project test results • Understanding Earned Value Management Basics • Strong troubleshooting and problem solving skills • Must understand fundamentals of Root Cause Analysis • Interface with shop floor personnel for the purpose of communicating technical, quality, and inspection information • Strong written and verbal skills including thorough knowledge of Microsoft Office products
 
Job Number: 39085
Job Location: Windsor Locks, CT
Duration: 12 months
Start Date: ASAP
Input Date: 09/28/2017
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Rick Nussbaum
Address: 1700 WELLS RD STE 1
City, State: ORANGE PARK, FL 32073-2373
Phone: 904/562-3215
800 Phone: 866/277-3343
Fax Phone: 904/713-2000
Website: www.apollopros.com

Electrical Technician

Description:
One year in length
Maximum Hourly pay rate $18.00
Tests and troubleshoots electronic products using standard and specialized test equipment. 

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers 
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements 
8. Ensures that all relevant quality information/feedback is provided 
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner 
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge: 

v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

v Experience 
o 1-3 years of electronics related experience

v Skill Level Required: 
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination 
o Willing and able to take and pass basic electronics test 

Desired Qualifications:

v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards
 

 
Job Number: 1710063131
Job Location: Bohemia, NY
Duration: 12 months
Input Date: 05/25/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002G9j8AAC&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Test Engineer (contract)

Description:
The Electronic Combat Solutions business area is seeking electrical engineering candidates interested in technical leadership roles on established programs. The IEWS Sustainment team is looking for a highly motivated Product / Process Engineer to support transition to production and sustainment activities on high complexity electronic products. This position will be for the hardware technical lead of a multi-disciplinary engineering team.

The hardware lead will be the primary interface to program engineering teams in: troubleshooting test failures, transitioning test equipment to a production environment, identifying product and test deficiencies to improve product yield and flow through the factory, identifying capacity concerns across test resources and driving mitigations to closure and sustaining technical production tasks on complex electro-mechanical modules and assemblies.
Must demonstrate strong technical aptitude, communication skills and leadership skills and be able to work cross-functionally within the hardware engineering organization and with other discipline/functions.
Must be able to lead small to mid-sized multidisciplinary hardware engineering teams through one or more phases of the hardware product lifecycle, including proposals, design, development, integration, test, transition to production and/or sustainment.

This position may include the following activities:
Support the test and troubleshooting of complex electronic systems, modules and sub-assemblies, working directly with production and program engineering personnel as required. May include high-speed digital products and RF products.
Interface with Engineering, Operations, Quality and other supporting functions to drive defect resolution to root cause.
Generate and implement improvements in product and test design and methodologies to reduce cost, increase yield, and improve throughput.
Generate and review the technical content of test procedures, drawings, engineering specifications, reports, Engineering Change Orders, and other documentation.
Interface with governmental customers, auditors, and suppliers as required.
Provide training and support to manufacturing personnel.
Support relocation of test equipment between manufacturing sites and lead transition to production.
Support Root Cause and Corrective Action activities.
Identify and implement Engineering Change Orders on products as required.
Provide daily work direction to other employees on a regular basis. Mentor peers and more junior engineers in areas of expertise.
Regularly exercise discretion and independent judgment in technical areas. Exercise considerable judgment in determining objectives.

Skills Required:
Experience with the design, build, integration, test and/or sustainment of complex electro-mechanical systems, specifically high-speed digital designs.
A motivated self-starter with leadership skills and ability to effectively work in a team environment.
Excellent problem solving skills, judgment, and analytical capability.
The ability to lead others to closure.
Experience presenting technical information to program teams and/or customers.
Strong technical writing and verbal communication skills.

Skills Preferred:
Proficient in the development of electronic circuits, knowing the advantages, limitations, and cost tradeoffs of various electronic design approaches

Experience Required:
A bachelor's Degree and 8 years of relevant work experience, or equivalent experience.

Experience Preferred:
10+ years of experience working with complex electrical products in a transition to production and/or sustainment role.
Experience with high-speed digital, processor and analog designs.
Experience working with mixed technology and/or RF products in a test and troubleshooting capacity.

Education Required:
B.S. in Electrical Engineering

Education Preferred:
M.S. Electrical Engineering

Only US Citizens are eligible to apply.
 
Job Number: 39041
Job Location: Nashua, NH
Rate: $54.00
Per Diem: yes
Duration: 12 months
Input Date: 10/12/2017
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Jane Rochford
Address: 42 MAIN ST
City, State: WINDSOR LOCKS, CT 06096
Phone: 860/254-6336
800 Phone: 866/277-3343
Fax Phone: 860/623-8228
Website: www.apollopros.com

Electro Mechanical Assembler

Description:
 
PDS Tech is seeking Assemblers for open positions in Redmond, WA.
Assembles fabricated parts at floor stations. Tests and calibrates parts and mechanisms to meet tolerances and product specifications. Uses hand tools and power tools to assemble units according to product specifications. Specific tools used will be tweezers, vacuum wands and torque drivers. Identifies units that fail tests or tolerance levels and repairs as necessary. Requires a high school diploma or its equivalent. May be required to complete an apprenticeship and/or formal training in area of specialty. May require 0-2 years of experience in the field or in a related area. Has knowledge of commonly-used concepts, practices, and procedures within a particular field. Relies on instructions and pre-established guidelines to perform the functions of the job. Works under immediate supervision, and reports directly to an area Supervisor. Primary job functions do not typically require exercising independent judgment.
***candidates must have computer skills and be familiar of how to use a computer***
Requires a verifiable high school diploma or its equivalent.
Experience working with microscope; working with microscopic components
 Must be comfortable with microscope work
 Soldering skills/experience required
Must be able to us tweezers, vacuum wands and torque drivers.
Must be able to follow direction, documentation and listening to instruction.
Understanding and awareness of chemicals in the work area
 Must have computer skills
Has knowledge of commonly-used concepts, practices, and procedures within a particular field.
Must be comfortable working in a hood and a Clean Room gown all day
This is an opportunity for contract to hire based on individual work performance, attendance/dependability and Honeywell business needs.
 Work Schedule :
2nd Shift 1500-2330 PST  Mon-Fri
3rd  Shift 2230-0700 PST  Mon-Fri
5th  Shift 1830-0700 PST  Fri -Sun
 
Rates: 
•  2nd shift   “    $ 18.00 Hr.
•  3rd shift    “    $ 19.00 Hr.
•  5th shift    “    $ 19.00 Hr

Candidates must be of U.S. Citizenship OR Green Card Holders
 The minimum level of education required for ISC assignments is High School diploma/GED. Suppliers should obtain a copy of the candidates highest level of education (HSD/GED or degree) to avoid delays in onboarding
 
 PDS Tech is seeking Assemblers for open positions in Redmond, WA.
Assembles fabricated parts at floor stations. Tests and calibrates parts and mechanisms to meet tolerances and product specifications. Uses hand tools and power tools to assemble units according to product specifications. Specific tools used will be tweezers, vacuum wands and torque drivers. Identifies units that fail tests or tolerance levels and repairs as necessary. Requires a high school diploma or its equivalent. May be required to complete an apprenticeship and/or formal training in area of specialty. May require 0-2 years of experience in the field or in a related area. Has knowledge of commonly-used concepts, practices, and procedures within a particular field. Relies on instructions and pre-established guidelines to perform the functions of the job. Works under immediate supervision, and reports directly to an area Supervisor. Primary job functions do not typically require exercising independent judgment.
***candidates must have computer skills and be familiar of how to use a computer***
Requires a verifiable high school diploma or its equivalent.
Experience working with microscope; working with microscopic components
 Must be comfortable with microscope work
 Soldering skills/experience required
Must be able to us tweezers, vacuum wands and torque drivers.
Must be able to follow direction, documentation and listening to instruction.
Understanding and awareness of chemicals in the work area
 Must have computer skills
Has knowledge of commonly-used concepts, practices, and procedures within a particular field.
Must be comfortable working in a hood and a Clean Room gown all day
This is an opportunity for contract to hire based on individual work performance, attendance/dependability and Honeywell business needs.
 Work Schedule :
2nd Shift 1500-2330 PST  Mon-Fri
3rd  Shift 2230-0700 PST  Mon-Fri
5th  Shift 1830-0700 PST  Fri -Sun
 
Rates: 
•  2nd shift   “    $ 18.00 Hr.
•  3rd shift    “    $ 19.00 Hr.
•  5th shift    “    $ 19.00 Hr

Candidates must be of U.S. Citizenship OR Green Card Holders
 The minimum level of education required for ISC assignments is High School diploma/GED. Suppliers should obtain a copy of the candidates highest level of education (HSD/GED or degree) to avoid delays in onboarding
 
Job Number: 1710075032
Job Location: Redmond, WA
Duration: 12 months
Input Date: 05/25/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: John Blackmore
Address: TIME SQUARE 660 BUILDING
660 SW 39TH ST STE 215

City, State: RENTON, WA 98057
Phone: 206/763-2840
800 Phone: 800/678-8644
Fax Phone: 206/763-3283
Email: cecjseattle@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023KWVAA2&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electro-Mechanical Design Engineer

Description:
Seeking an Electromechanical Design Engineer (4) for an opening in Orlando, FL.

RESPONSIBILITIES:
-An Electromechanical Design Engineer is responsible for the design, documentation and production floor support of hardware (missile electronics, missile electrical cabling, airborne support equipment, ground support equipment and test sets.
-Additional duties include investigation of discrepant hardware and test anomalies.

REQUIRED EXPERIENCE:
Design experience with electrical cables, test sets, breakout boxes, 19” support equipment rack design Proficiency with Creo Parametric 2.0 Cabling and Intralink.
Proficiency with ASME Y14.5M-1994 and generating detailed engineering drawings.
Proficiency with reading schematics for electrical cable assemblies in order to define and select connectors, backshells, splices, wiring, etc.
Basic computer skills and a working knowledge of Microsoft Office products (Word and Excel) Compliance to quality and safety policies at all times.
Physical Requirements – This work requires delicate handling, reaching, light lifting and may require a combination of sitting and standing as well as walking between test locations and occasional use of small step-ladders.

PREFERRED EXPERIENCE:
Experience with design of flexible and semi-rigid RF cables

ADDITIONAL EXPERIENCE:
Design Engineer
Creo
Cabling
ASME/ANSI
Reading Schematics:

Excel
Microsoft Office
Word
Analog Silicon
APQP
Documentation
Ground Support Equipment
Missile
Parametric
Rack Design
RF
Schematics
Wiring
English: Read, Write, and Speak

EDUCATION:
Must have at minimum a Bachelor of Science degree in an Engineering related discipline.

WORK HOURS:
Full-Time
 
Job Number: 165645
Job Location: Orlando, FL
Duration: 12 Months
Start Date: ASAP
Input Date: 10/06/2017
Firm Name: CHIPTON ROSS
Attention: Debbie Aubert
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the Phoenix area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065209
Job Location: Phoenix, AZ
Duration: 12 months
Input Date: 05/25/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Terry Brooke
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000021WJmAAM&URLSource=cjhunter

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the San Jose area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065206
Job Location: San Jose, CA
Duration: 12 months
Input Date: 05/25/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Karla Pelonis
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000021WJXAA2&URLSource=cjhunter

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the San Diego area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065205
Job Location: San Diego, CA
Duration: 12 months
Input Date: 05/25/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Karla Pelonis
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000021WJIAA2&URLSource=cjhunter

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the Los Angeles area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065207
Job Location: Los Angeles, CA
Duration: 12 months
Input Date: 05/25/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Karla Pelonis
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000021WJcAAM&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electro-Mechanical Technicians (3 Openings)

Description:
One (1) Cable & Harness Specialist / Technician
> 3 – 5+ years extensive experience specialized in cable and harness fabrication / building; someone with heavy Wiring Harness Fabrication (Wire gauges, various types of sheathing, etc) experience.

Two (2) Electro-Mechanical Technicians (
> See “Must have Electro-Mechanical experience with:” below

Job Description:

> Assemble electrical, electronic and/or electro-mechanical assembles, subassemblies or parts, as instructed in accordance to manufacturing documentation (assembly instructions, process documents, schematic, etc.) into sub-units or complete units.
> Wire electronic components, per manufacturing documentation, into sub-units or complete units
> Responsible for soldering and crimping connectors
> Assembles parts into sub-units or complete units, including sub-assembly, process assembly, inspection, modifications, upgrades and rework.
> Completes production/quality related documentation
> Assembles repairs and fabricates parts by operating mechanical equipment or tools, in conjunction with adhering to proper handling and safety requirements (Cutting and Fabrication).
> Performs work in accordance with quality and engineering standards
> Responsible for testing of all electronic assemblies
> Keep work area clean and organized as to present a professional work environment
> Complete any other work related task as directed by supervisor

Job Requirements:

> 5+ years’ experience in manufacturing/production environment with High School Diploma and US Citizenship required
> Must have Electro-Mechanical experience with:
o Soldering (Cup solders)
o Crimping of various terminals (Barrel, Machine, MIL-SPEC, Various ring terminals, RJ 45, BNC)
o Schematic reading and comprehension (Mechanical and Electrical)
o Measuring tools (Calipers, Multi-meters, etc.)
o Hand tools (Wrenches, Screwdrivers, Torque tools, Small power tools)

Preferred Experience:

> Direct experience with Military / Government Contracts within a manufacturing environment
> Preferred Certifications (Current or Non-Current): IPC-A-610, IPC-A-620 or CIS IPC A J-STD-0001
> Experience working in a quality controlled environment

Mark A Ludwig
Vice President
Global American Staffing
Email: mludwig@globalams.us
Office: (508) 230 – 5030 x123
 
Job Number: 039_2017
Job Location: Elkridge, MD
Rate: DOE
Per Diem: Split Possible
Overtime: Yes
Duration: Long-Term
Start Date: ASAP
Input Date: 04/02/2018
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark A Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic Assemblers - Redondo Beach, CA

Description:
STS AeroStaff Services now offers Electronic Assembler jobs in Redondo Beach, California!

Job Duties:

Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, rack and stack and cables
Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws
Makes continuity checks on work in process and completed
May conduct quality inspections on processing line in accordance with quality specifications
May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions
Basic Qualifications:

High School and 4 years’ additional education or AA Degree
Skilled at working from blueprints and engineering drawings
Experience Soldering connections
Familiar with IPC standards
Previous Mechanical assembly experience building drawer assemblies required
Use of general hand tools (electric screwdrivers, crimpers, wrenches)
Preferred Qualifications:

Secret SCI Clearance, or ability to obtain a Secret SCI Clearance
What We Offer:

STS AeroStaff Services works with the largest names in the aviation industry, offering hundreds of career opportunities across the United States. With over two decades of experience, we soar in our commitment to excellence and professionalism. We proudly offer competitive rates, direct deposits, medical insurance, cash advances, and referral bonuses.

If you would like to speak with an Aviation Recruitment Professional directly, call 1-800-359-4787. Our job placement services are always free, and we are open seven days a week. Reach out at any time! Thanks so much for your interest in working with STS AeroStaff Services, and we look forward to speaking with you soon.
 
Job Number: 40242
Job Location: Redondo Beach, CA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 09/29/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Electronic Assemblers Needed in Redmond, WA

Description:
PDS Tech has an immediate need to fill several Electronic Assembler positions in Redmond, WA.  If you are skilled at electronic assembly, please apply online today, or respond with your resume to: 
 Seattle_wa@pdstech.com

Some of your responsibilities as an Assembler will include:
  • Assemble fabricated parts at floor stations. 
  • Test and calibrate parts and mechanisms to meet tolerances and product specifications. 
  • Use hand tools and power tools to assemble units according to product specifications.
  • Identify units that fail tests or tolerance levels and repair as necessary.
  • Specific tools used will be tweezers, vacuum wands and torque drivers.


These positions are contract to hire, based on individual work performance, attendance/dependability, and business needs.

All shifts are available.

  


 
Requirements:
  • Experience working with microscope and microscopic components.
  • Soldering skills and experience.
  • Basic computer skills.
  • High school diploma or its equivalent.
  • US citizen or permanent resident.
  • English language comprehension and communication abilities.

 
Job Number: 1710071348
Job Location: Redmond, WA
Duration: 6 months
Input Date: 05/25/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: John Blackmore
Address: TIME SQUARE 660 BUILDING
660 SW 39TH ST STE 215

City, State: RENTON, WA 98057
Phone: 206/763-2840
800 Phone: 800/678-8644
Fax Phone: 206/763-3283
Email: cecjseattle@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i5000000237QZAAY&URLSource=cjhunter

Electronic Troubleshooter

Description:
Tests and troubleshoots electronic products using standard and specialized test equipment. 

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers 
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements 
8. Ensures that all relevant quality information/feedback is provided 
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner 
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge: 

v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

v Experience 
o 1-3 years of electronics related experience

v Skill Level Required: 
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination 
o Willing and able to take and pass basic electronics test 

Desired Qualifications:

v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards
 
Tests and troubleshoots electronic products using standard and specialized test equipment. 

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers 
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements 
8. Ensures that all relevant quality information/feedback is provided 
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner 
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge: 

v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

v Experience 
o 1-3 years of electronics related experience

v Skill Level Required: 
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination 
o Willing and able to take and pass basic electronics test 

Desired Qualifications:

v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards
 
 
Job Number: 1710066458
Job Location: Bohemia, NY
Duration: 12 months
Input Date: 05/25/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000021ioWAAQ&URLSource=cjhunter

Electronics Technician

Description:
Chipton-Ross is seeking a Electronics Technician in Santa Barbara, CA.

Description
Provides engineering hardware fabrication support, troubleshooting, testing and basic Laboratory operations responsibility. These responsibilities will include fabrication of electronic/electrical chassis' and mechanical rack fabrication using development engineering drawings. Candidate must be capable of working independently, discussing technical issues with customers and working with vendors.

Skill/Experience/Education
Mandatory:
Integrated Circuit Layout Technician. SBF is seeking an experienced integrated circuit technician to help advance the state of the art in infrared and visible imager readout integrated circuits (ROICs). Significant experience with physical layout of mixed signal VLSI CMOS transistor level designs is required. The selected candidate will perform silicon layout of analog and digital submicron transistor level designs in support of advanced infrared cameras and imagers. Designs include ultralow noise analog circuit blocks, low power analog to digital conversion, high speed multi GHz data transmission and serializers. MUST HAVE CMOS integrated circuit layout experience.

Desired:
Schematic capture, design verification and simulation.
 
Job Number: 165226
Job Location: Santa Barbara, CA
Rate: $DOE
Duration: 12 months
Input Date: 05/27/2018
Firm Name: CHIPTON ROSS
Attention: Brent Sizemore
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bsizemore@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer - Level 2

Description:
Embedded Software Engineer - Level 2

Location: Grand Prairie, TX
Pay Rate: DOE ($65/hr - $80.73/hr)
Duration: 1 year contract
Shift: First, 9/80, no OT
Travel: Yes, to customer locations as required

** MUST have an ACTIVE SECRET CLEARANCE **

Description
-Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements.
-Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature.
-Interfaces with customers, suppliers, application users, and other technical and support personnel.
-Must have Secret clearance.

Skill/Experience/Education (Mandatory):
-US DOD Secret Clearance Required (4-5 years experience)
-BS in Computer Engineering, Computer Science, Software Engineering, or Related Field
-C/C++ (4-5 years experience)
-Linux (Red Hat) (4-5 years experience)
-Embedded SW Engineering (4-5 years experience)

Desired:
-Razor (CM Control)
-Domain Knowledge of Air and Missile Defense (4-5 years desired)
-Seeker Programming and/or Integration (4-5 years desired)
-Hardware-in-the-Loop (HWIL) - Unit Under Test Experience (UUT) - (4-5 years desired)
 
Job Number: 7561
Job Location: Grand Prairie, TX
Rate: 65.00-80.73
Per Diem: Split Possible
Overtime: No
Duration: 1 year
Start Date: ASAP
Input Date: 10/12/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer - Level 2

Description:
Embedded Software Engineer - Level 2

Location: Grand Prairie, TX
Pay Rate: DOE ($65/hr - $80.73/hr)
Duration: 1 year contract
Shift: First, 9/80
Travel: Yes, to customer locations as required
** MUST have an ACTIVE SECRET CLEARANCE **

Description
-Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements.
-Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature.
-Interfaces with customers, suppliers, application users, and other technical and support personnel.
-Must have Secret clearance.

Skill/Experience/Education (Mandatory):
-US DOD Secret Clearance Required (4-5 years experience)
-BS in Computer Engineering, Computer Science, Software Engineering, or Related Field
-C/C++ (4-5 years experience)
-Linux (Red Hat) (4-5 years experience)
-Embedded SW Engineering (4-5 years experience)

Desired:
-Razor (CM Control)
-Domain Knowledge of Air and Missile Defense
-Seeker Programming and/or Integration
-Hardware-in-the-Loop (HWIL) - Unit Under Test Experience (UUT)
 
Job Number: 7295
Job Location: Grand Prairie, TX
Rate: 65.00-80.73
Per Diem: Split Possible
Overtime: No
Duration: 1 year
Start Date: ASAP
Input Date: 10/12/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engine Control Logic Analyst

Description:
Engine Control Logic Analyst

Jupiter, FL
1 year Contract
Pay Rate: $60.00-70.00/Hr

1st Shift

Duties:
Engine Control Logic Analyst to support Hypersonics program.



** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years **



** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

** Selected candidates for Jupiter, FL roles must be onboarded through one of these approved background check providers: EIS, First Advantage, Sterling or Talentwise. See attachment for specific background check onboarding requirements **



Keywords:

-Hypersonics

-Control Systems

-Requirements

-Programming

-Embedded Software

-Logic

Skills:
Required:

Familiarity with industry standards for engine control software design (P&W SEPG-0-000, NASA NPR 7150.2A, ISO 12207, DO-178C or other industry standard).
Good technical writing skills.
Project/schedule management skills.
Requirements generation skills.
Ability to translate engine operation requirements into engine control logic flow diagrams.
Proficiency with MS Office: Word, EXCEL and Powerpoint.
Desired:

Experience/proficiency with the following tools and computing platforms is desired: Windows, Alpha/VMS, C Programming, Pictures-to-Code, Matlab/Simulink, Unigraph.
Experience with linear model generation and control loop gain sizing and stability analysis.
Familiarity with Aerojet Rocketdyne procedures (AR ENG-P-4.03.04)


Education:
B.S. or M.S. in Mechanical or Aerospace Engineering
 
Job Number: 7883
Job Location: Jupiter, FL
Rate: 50-70
Per Diem: Split Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/27/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engine Control Logic Analyst with active secret URGENT FL

Description:
160331/7443403

Job Title: Engine Control Logic Analyst
Keywords:
Number of Positions: 3

Remaining Positions: 3

Duties:
Engine Control Logic Analyst to support Hypersonics program.



** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years **



** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

** Selected candidates for Jupiter, FL roles must be onboarded through one of these approved background check providers: EIS, First Advantage, Sterling or Talentwise. See attachment for specific background check onboarding requirements **



Keywords:

-Hypersonics

-Control Systems

-Requirements

-Programming

-Embedded Software

-Logic

Skills:
Required:

Familiarity with industry standards for engine control software design (P&W SEPG-0-000, NASA NPR 7150.2A, ISO 12207, DO-178C or other industry standard).
Good technical writing skills.
Project/schedule management skills.
Requirements generation skills.
Ability to translate engine operation requirements into engine control logic flow diagrams.
Proficiency with MS Office: Word, EXCEL and Powerpoint.
Desired:

Experience/proficiency with the following tools and computing platforms is desired: Windows, Alpha/VMS, C Programming, Pictures-to-Code, Matlab/Simulink, Unigraph.
Experience with linear model generation and control loop gain sizing and stability analysis.
Familiarity with Aerojet Rocketdyne procedures (AR ENG-P-4.03.04)


Education:
B.S. or M.S. in Mechanical or Aerospace Engineering


Skills:
Required

ENGINE CONTROLSCONTROL SYSTEMSREQUIREMENTS ANALYSISEMBEDDED SOFTWAREAEROSPACE


State/Province: Florida
City/Town: Jupiter

Start Date: 10/02/2017 Hours Per Week: 40.00
Est. End Date: 12/31/2017 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7443403
Job Location: Jupiter, FL
Rate: 70/hr max
Duration: 12 month contract
Input Date: 10/17/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engine Design Engineer

Description:
Seeking an Engine System Design Engineer based of Canoga park, CA.

Duties:
%u2022 Performs engine system level design tasks for liquid rocket engines.
%u2022 Primary duties include working within an integrated product team (IPT) environment to design/revise engine system components utilizing PTC CREO2 3D CAD software, coordinating analysis support and releasing drawings/models with minimal supervision.
%u2022 Additional duties may include in-house/vendor fabrication and test support as needed.
Skills:
%u2022 CREO2 3D CAD modeling skills with technical product design experience in liquid rocket/aerospace systems.
%u2022 Knowledge of geometric tolerancing & dimensioning, machining and fabrication processes.
Education:
%u2022 Bachelor of Science in Mechanical Engineering or related engineering degree is preferable.
 
Job Number: 377111
Job Location: Los Angeles
Per Diem: NO
Overtime: YES
Duration: 12 mon.
Start Date: ASAP
Input Date: 10/10/2017
Firm Name: CDI CORPORATION
Attention: Rashmi Bhalla
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer SolidWorks

Description:
Job Title: Engineer SolidWorks
Location: Grandville, MI. 49418
Duration: 2+ Months ( Can go Longer)
Job Details

We're seeking a Mechanical Engineer that knows how to use SolidWorks in developing Compressors, Mirrors, Horns and possibly some interior plastic components too.
• This position is working on a new program and have an immediate need for a SolidWorks CAD/Design person that is well versed in SolidWorks and have experience in FEA analysis, bills of material, project timing and design of mechanical parts.
 
Job Number: 3475
Job Location: Portland, ORE
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 2+ Months ( Can go Longer)
Start Date: ASAP
Input Date: 10/12/2017
Firm Name: OLSA RESOURCES INC
Attention: Sarabjit Saxena
Address: 3836 N BALLAST ST
City, State: PORTLAND, OR 97217
Phone: 503/608-7895
Fax Phone: 503/608-7896
Website: www.olsaresources.com

Engineer Structural- 5- Secret Clearance

Description:
PDS Tech is seeking a candidate for the Engineer Structural 5 position located in Melbourne, FL.  

Perform static, dynamic, and DaDT structural analyses of metallic airframe structure, mechanical systems, and equipment, by hand and by using the automated methods and procedures approved for the program.
Ensure that 
designs meet program requirements and are the lightest, lowest cost, and highest quality products consistent with schedule and budget objectives.
The analyst may also be expected to derive non-flight applied loads, create, extract and 
distribute internal loads, and perform weight and stiffness optimization. T
ools utilized may include FEMAP, NX,Teamcenter 
and other software applications.

Basic Qualifications:



Bachelor of Science degree (ME/AE/CE) with 14 years of experience in AEROSPACE Structural Analysis.




Preferred Qualifications:



Knowledge of FEMAP and NX CAE. Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplishing them simultaneously, and comprehend and analyze complex problems and develop solutions. Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplishing them simultaneously, and comprehend and analyze complex problems and develop solutions.

 


 
Job Number: 1710075260
Job Location: Melbourne, FL
Duration: 5 months
Input Date: 05/25/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Elisa Petersen
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023L3MAAU&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
External Loads Engineer

Description:
Responsible for determination of flight and ground static and fatigue loads of airframe components, assemblies and systems, to ensure aircraft design is structurally sound and meets all regulatory and company requirements related to structural strength and fatigue.

Duties and Responsibilities:
Applicant must be able to define and validate aircraft flight and ground loads through simulation/calculation using established theory and methods.

Education, Work Experience, Certification and/or Licensure:
1. BS degree in Aeronautical, Aerospace or Mechanical Engineering required, MS degree or PhD in Aeronautical or Aerospace Engineering is preferred
2. Applicant shall possess a minimum of 6 years’ experience in aircraft external Loads analysis with preferably 10 years’ experience
3. Excellent communication skills both written and verbal
4. Experience and demonstrated proficiency in Unix/Linux, FORTRAN, C/C++, MATLAB, VBA, MSC/NASTRAN, MSC/PATRAN, MSC/FLIGHTLOADS is required. Python experience and/or proficiency is desirable.

Knowledge, Skills and Abilities:
1. Knowledge of static maneuvers, static ground, control surface component loads, component pressure loads development, and ground support equipment loads, along with experience in dynamic loads, such as tuned gust, PSD, equipment design accelerations, and dynamic landing loads per FAR/EASA requirements. Experience with turbine engine fan blade out, emergency landing loads per FAR/EASA requirements, as well as flutter and vibratory analysis, is desirable.
2. Knowledge of, and experience with, FAA FAR 23 and EASA CS 23 Loads regulatory requirements and means of compliance is required, and experience with FAA FAR 25 and EASA CS 25 Loads regulatory requirements and means of compliance is desirable.
3. Must be proficient in generating documentation to support certification efforts related to external loads.
4. Knowledge of, and experience with, dynamic aeroelastic analysis is desirable. Demonstrated knowledge of FEA and doublet-lattice aero modeling techniques, particularly in MSC/NASTRAN, is desirable.
5. Strong knowledge of CFD principles and CFD-based modeling, along with wind tunnel test data usage for Loads analysis, is required. Applicant must be able to communicate aerodynamic, structures and systems discipline input needs to ensure accurate load set development and conveyance.
 
Job Number: 28-014
Job Location: Greensboro, NC
Rate: $62-$72/hr May pay more DOE
Per Diem: YES
Overtime: YES
Duration: 1 YR+
Start Date: ASAP
Input Date: 10/30/2017
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Finite Element Analysis (FEA) / Finite Element Method (FEM) Mechanical Engineer - Level 3 with active secret FL

Description:
1286
Finite Element Analysis (FEA)/Finite Element Method (FEM) Mechanical Engineer - Level 3
Orlando FL
Active secret required
75/hr max
12 month contract

Description
Mechanical Structures / Dynamics Engineer: Perform stress analysis for flight structures and ground test support equipment’s. Course work and stress analysis experience must include classical hand analysis as well as finite element analysis methods. Job duties may encompass buckling analysis; linear and non-linear stress analysis; composite analysis and mechanism. Candidate should be highly skilled in finite element modeling and analysis, with expertise in the use of FEM, Nastran, NX or BETACAE preferred. Experience with high velocity impact analysis or flight test random vibration data reduction is a plus. Requires good verbal and written communication skills, and ability to work in a team environment. Candidate will be required to support designers in determining parts with adequate margins of safety, good load paths, low weight, and high producibility. Job duties may also require support to structural test definition, requirements, monitoring, data reduction, and comparison to analysis.

Skill/Experience/Education

Mandatory:

Bachelor’s degree from and accredited college in a related discipline, or equivalent experience/combined education, with 8 years of professional experience; or 6 years’ experience with a related Master’s degree.

Desired:

Mechanical Engineering degree, FEM, NASTRAN, NX or BETCAE skills
PRO E and/or CATIA skills
 
Job Number: JE-1286
Job Location: Orlando, FL
Rate: 75/hr max
Duration: 12 month contract
Input Date: 10/17/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Finite Element Analysis (FEA)/Finite Element Method (FEM) Mechanical Engineer - Level 3

Description:
Finite Element Analysis (FEA)/Finite Element Method (FEM) Mechanical Engineer - Level 3

Location: Orlando, FL
Duration: 1 year contract
Pay Rate: $65/hr - $75/hr (DOE)
Shift: 1st, 9/80
**Must have an Active Secret Clearance**


Job Description:
-Mechanical Structures / Dynamics Engineer: Perform stress analysis for flight structures and ground test support equipment’s.
-Course work and stress analysis experience must include classical hand analysis as well as finite element analysis methods.
-Job duties may encompass buckling analysis; linear and non-linear stress analysis; composite analysis and mechanism.
-Candidate should be highly skilled in finite element modeling and analysis, with expertise in the use of FEM, Nastran, NX or BETACAE preferred.
-Experience with high velocity impact analysis or flight test random vibration data reduction is a plus.
-Requires good verbal and written communication skills, and ability to work in a team environment.
-Candidate will be required to support designers in determining parts with adequate margins of safety, good load paths, low weight, and high producibility.
-Job duties may also require support to structural test definition, requirements, monitoring, data reduction, and comparison to analysis.


Mandatory Skills:
-Bachelor’s degree from and accredited college in a related discipline, or equivalent experience/combined education, with 8 years of professional experience; or 6 years’ experience with a related Master’s degree.


Desired Skills:
-Mechanical Engineering degree, FEM, NASTRAN, NX or BETCAE skills
-PRO E and/or CATIA skills
 
Job Number: 7019
Job Location: Orlando, FL
Rate: 65.00-75.00
Per Diem: Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 12/20/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Controls Systems Engineer

Description:
Design Engineer responsible for the conceptual design and production engineering of Aircraft Flight Control Systems. The candidate will be responsible for conceptual layout, detailed design and aircraft production & in-service design and modification.

Duties and Responsibilities:
1. Generates Engineering Models and Drawings utilizing CATIA Version 5.
2. Performs trade studies for Flight Control Systems to identify optimal engineering solution.
3. Define primary and secondary Flight Control System schematics and architecture
4. Develop component level requirements derived from top level system requirements
5. Perform clean sheet component layouts for Flight Control Systems in support of schematic architecture
6. Perform kinematic studies and system performance analysis for powered and unpowered Flight Control Systems
7. Have the ability to generate Flight Controls certification documents in support of design and qualification requirements.
8. Serves as a primary interface within the Flight Control Systems group to ensure effective communication, coordination, and timely completion of project milestones.

Education, Work Experience, Certification and/or Licensure:
1. BS in Mechanical Engineering with 10-15 years directly related experience
a. OR MS / MBA with 8-13 years of experience
b. OR 18-23 years directly related experience
2. Some Travel will be required

Knowledge, Skills and Abilities:
1. Proficient in use of CATIA Version 5.
2. Proficient in use of Kinematic function within CATIA Version 5.
3. Advanced knowledge of drafting rules.
4. Advanced knowledge of Geometrical Dimensioning and Tolerancing.
5. Proficient in Microsoft Office Products.
6. Use of Team Center.
 
Job Number: 28-013
Job Location: Greensboro, NC
Rate: $62-75/hr May pay more DOE
Per Diem: YES
Overtime: YES
Duration: 1 YR+
Start Date: ASAP
Input Date: 10/30/2017
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Sciences

Description:
Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations.

Seeking multiple contract or fulltime Flight Sciences Engineers to join the teams in Seattle and Moses Lake with at least five years� experience in flight sciences, including:
- Stability & Control
- Aircraft Performance
- 6DOF Flight Simulation

Essential functions:
� Define and validate flight test specifications
� Perform data review and analysis for verification of aircraft level requirements
� Utilize flight simulation models and data
� Support ground and flight test activities
� Prepare flight test reports

Desired Qualifications:
� Flight Sciences Engineer with experience with FAA Part 25 or Part 23 aircraft certification
� Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
� A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
� Ability to represent the client professionally and positively during client interactions and meetings.
� Bachelor or advanced degree in Aerospace Engineering.

If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

Candidates must have legal authorization to work in the United States, Canada or Mexico
 
Job Location: Seattle, WA
Per Diem: possible
Overtime: Yes
Duration: lt
Start Date: asap
Input Date: 10/06/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Controls -

Description:
Johnson Service Group is seeking a Flight Test Controls for a 15 month contract in West Palm Beach, FL!

The applicant will need to work in West Palm Beach, FL for the first four to six months of the assignment in order to become familiar with the aircraft and the test requirements. The applicant will then likely be expected to move to Patuxent River, MD as the program shifts testing to be conducted from there.

Description:

Plan, conduct, manage and report flight control systems and handling qualities flight tests.
Test planning function involves determining measurement and flight condition requirements necessary to safely provide evaluation, qualification and certification data.
These details are written into published test plans. Test conduct involves briefing flight and ground crews and real-time telemetry monitoring of critical parameters.
Large volumes of gathered flight data are processed, analyzed, and reported. These results are written into published test reports.
Work closely with the handling qualities and flight controls design engineers to become familiar with the flight control system hardware components and software, specifically control law design. Quickly identify problems on the test aircraft, troubleshoot the issue, and work with design engineering to implement a solution.
Utilize Mat lab to analyze flight test data and work with control laws.
Fly on board experimental aircraft to conduct test flights, modify software flight test variables, and collect data.
Experience:

Minimum of a Bachelor's degree in Aerospace Engineering, Mechanical or Electrical Engineering. Master’s degree a plus.
Minimum of 4 years of fixed/rotary wing flight control systems and handling qualities flight test engineering experience.
Fly-By-Wire experience preferred. Analytical thinking, troubleshooting, problem solving, and communication--written and oral. Technical writing.
Matlab/Simulink, Microsoft Office applications. General aviation knowledge; pilot license is preferred.


Additional Notes

The job involves significant teamwork and coordination with flight test co-workers in a variety of disciplines (pilots, mechanics, inspectors, instrumentation and data technicians), qualification or certification authority representatives and subject matter expert design engineers. The applicant will also team with design engineering by participating in simulation testing. Good interpersonal skills are imperative. Personal flexibility is required to occasionally support unusual working hours.
 
Job Number: 356488
Job Location: West Palm Beach, FL
Rate: $39hr
Per Diem: yes
Overtime: possible
Duration: 15 months
Start Date: asap
Input Date: 10/19/2017
Firm Name: JOHNSON SERVICE GROUP
Attention: Rich Martinsen
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
Unique Skills:
Experience either conducting, functioning as an on board flight analyst, or telemetry during experimental fixed wing aircraft flight testing in any of the following fields: Avionics, Powerplant/Mechanical Systems, Performance/Stability & Control. Experience documenting test procedures consisting of step by step instructions which includes success criteria for determining pass or fail of test points in a released test plan. Experience reviewing results of flight test data to understand results and make decisions on whether test points pass or fail.

Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects.
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Education/Experience
Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 24-156
Job Location: Savannah, GA
Rate: $56-$67/hr.
Per Diem: YES
Overtime: YES
Duration: 1 YR+
Start Date: ASAP
Input Date: 11/14/2017
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. Located in Seattle, they are a small but rapidly growing company in Seattle, WA. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants.

We are seeking full-time and contract Flight Test Engineers to join us in Moses Lake, WA. The ideal candidate will possess experimental flight test operational experience in either STC or Type Cert Programs. The individual in this position will be involved in a range of airplane flight test operations.

Essential Functions:
Coordinate test and certification requirements.
Author flight test and ground test plans including test hazard analysis.
Author instrumentation specifications, wire diagrams, FTEO packages, and calibration documentation.
Support instrumentation installation as required.
Support ground operations, including weight and balance activities, fuel management, pre-flight and post-flight tasks and briefings.
Support flight and ground test conduct and data collection.
Analyze test data and evaluate compliance with regulations.
Prepare certification test reports.
Domestic and occasional international travel is required.
Desired Qualifications:

5+ years relevant work experience related to experimental flight test operations. Experience in all of the above activities is not critical.
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
 
Job Location: Moses Lake, WA
Per Diem: possible
Overtime: Yes
Duration: LT
Start Date: asap
Input Date: 12/07/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Instrumentation Engineers

Description:
Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.
This position will be in the Test and Evaluation Support unit, which has four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations.

The Instrumentation Engineer is responsible for supporting the operational and technical success of the instrumentation group. This person works closely with all other Instrumentation Engineers, Technicians, other T&E Support Staff to meet instrumentation requirements.

Job Duties and Responsibilities (Essential Functions):

� Provide instrumentation services: to include:
o production of instrumentation specifications, sensor selection, wire diagrams, installation diagrams (FTEO packages), sensor and system calibration, signal conditioning, derived parameters, cockpit displays, data validation, data tracking, data recording, documentation and conformity.
o Ensuring that the instrumentation systems and deliverables meet quality standards as well as all customer specifications to include accuracy, resolution, and frequency range, and function correctly within harsh operating conditions typical of aircraft.
o Provide instrumentation equipment management to ensure that equipment is maintained, calibrated and available for re-use to minimize waste.
� Provide instrumentation technical input: advise the organization in regards to technical information for the best technical selection of sensors and support equipment at affordable costs. Works closely with Product Development Unit when new equipment and systems are required or for the design of Flight Test safety equipment, or any complex mechanical installations that require stress approval.
� Support Program Teams: Works with OEM & STC program and project managers with technical resources requirements. Fully supports the test planners in regards to their instrumentation needs.


Knowledge/Skills/Abilities:
� Intermediate knowledge skills and competency of Flight Test Instrumentation (FTI) and data equipment for the purpose of recording and monitoring parameters fitted to experimental aircraft including associated of industry processes and practices to include:
o Electrical and avionics design,
o Data Systems Design Principles
o Telemetry
o Air data booms (straight nose and swivel-head)
o Static trailing cones
o Sensitive aircraft instruments
o Cockpit displays
o End-user interface
o Portable test equipment such as hand-held stick force gauges
o High-end GPS receivers and antennas for precise aircraft positioning
o Position transducers - sting potentiometers, rotary potentiometers, LVDTs, RVDTs
o Pressure transducers
o Flowmeters
o Temperature sensors - thermocouple wire/probes/assemblies, RTD probes, thermistors, glass bulb thermometers
o Strain gauges, load cells, force transducers, torque sensors
o Portable weather stations - wind speed/direction, outside air temperature, relative humidity
o Video recording equipment
o Signal conditioners
o Data acquisition systems and data loggers
� Intermediate knowledge of flight test operations and flight certification.

Level Requirements (Minimum):
Education
� Formal Instrumentation Training (Military or Civilian) � Preferred
� BS in Engineering or equivalent experience

Experience
� 5+ years relevant technical experience
� Intermediate understanding of flight and ground test planning and test conduct, and test data analysis.
 
Job Number: #301-Flight Test Instrumentation
Job Location: Moses Lake, WA - Washington
Rate: Open
Per Diem: Possible
Overtime: Yes
Duration: 2-3 years or direct
Start Date: ASAP
Input Date: 01/23/2018
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Mechanical Design Engineer

Description:
Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services

Unique Skills:
• Flight Test Mechanical Design Experience
• Required SmarTeam Experience
• Required 15,000 hours Catia V5

Experience/Education:
• Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• See Other Requirements in Job Description.10 yrs in the specific technical discipline or 15 yrs broad engineering experience in several technical disciplines with Bachelors, or 8 yrs in the specific technical discipline with Masters, or 6 yrs in the specific technical discipline with PhD.
 
Job Number: 24-203
Job Location: Savannah, GA
Rate: $75.00 to $ $80.00
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 12/04/2017
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Mechanical Design Engineer

Description:
Flight Test Mechanical Design Engineer
Savannah, GA
Rate: $75-$80

Unique Skills:

Flight Test Mechanical Design Experience Required Smarteam Experience Required 15,000 Hours CATIA V5 Required Company Experience Preferred Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job. Position Purpose: Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Company products and services Principle Duties and Responsibilities: Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned. Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 7978
Job Location: Savannah, GA
Rate: $75-$80
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 12/04/2017
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
HYDRAULIC/MECH. FLT CONTROLS -

Description:
HYDRAULIC/MECH. FLT CONTROLS

15 MONTHS CONTRACT

STRATFORD, CT

Description:

Provide administrative support to the Hydraulics and Mechanical Controls team on the 53K program.
Responsibilities include developing design change notices, supporting engineer change requests, and tracking engineering design changes through the entire release process.
Responsibilities also include supporting supplier managers and cost account manager utilizing the COMPANY EV system.
 
Job Number: 358686
Job Location: Stratford, CT
Rate: $37hr
Per Diem: yes
Overtime: possible
Duration: 15 months
Start Date: asap
Input Date: 10/19/2017
Firm Name: JOHNSON SERVICE GROUP
Attention: Rich Martinsen
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Handling Qualities Engineer

Description:
12+ contract

Responsible for analysis, simulation, testing, and reporting, in support of AW609 Tiltrotor certification activities, trade studies, and capability improvements.

Job Responsibilities:
•Conduct analytical studies to support the safe expansion of the AW609 Tiltrotor flight envelope, the development of systems impacted by aircraft performance and handling qualities, and provide the technical justifications that drive program decisions.
•Evaluate tiltrotor handling qualities/flying qualities through simulation and flight test analysis.
•Support flight test activities including the development of flight test plans, analysis or test results, and reporting used to show compliance to Federal Aviation Regulations (FARs) and company requirements.
•Conduct flight simulation evaluations to validate flight model, identify critical conditions, and support the development of flight control laws.

Qualifications:
•Must be a US Citizen to operate ITAR controlled flight simulation software
•Minimum education: Bachelor’s degree in relent engineering field such as aeronautics or mechanical engineering
•Minimum 2 years’ experience in flight mechanics related positions such as flying qualities, handling qualities, guidance navigation and controls (GNC)
•Tiltrotor handling/flying qualities and flight test experience desired
•Experience with scripting languages such as Visual Basic, Perl, Python, Matlab, or Octave.
•Strong analytical skills. Ability to understand complex systems and aircraft flight characteristics.
•Strong written and verbal communication skills. Ability to communicate at all levels of the organization, identify solutions in the presence of conflict and ambiguity.

Please send resume to bnorman@butler.com.
 
Job Number: 52426
Job Location: Philadelphia, PA
Rate: open
Per Diem: possible
Overtime: possible
Duration: 12 months
Start Date: 10/23/17
Input Date: 10/12/2017
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Becky Norman
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Instrumentation Engineer

Description:
1st or 2nd shift

Work from Engineering Requests, Procedures and Drawings with limited guidance; to Fabricate, Install, Check-out, Diagnose, and Trouble-Shoot Instrumentation Data Acquisition Systems/Sensors in support of Ground and Flight Test Programs.

Requires planning, building and terminating the various cable harnesses required in the Instrumentation System.

Assist in performing System and sensor calibrations.

Working environment consist of the Structural Test Lab, Remote Test Stands ( Engineering & Quality Assurance ) as well as Offsite support to include Aircraft Instrumentation .

Requires a good working knowledge of Instrumentation Sensors, slip rings, and data acquisition systems.

Must possess a strong Mechanical and Electrical background and familiarity with Strain Gages and their circuitry, linear displacement and vibration transducers, measurement systems, instrumentation wiring and documentation.

Ability to perform strain gage installations preferred.

Must be able to work from elevated work platforms at various heights.

Must be willing and able to work in inclement weather.

Must be capable and comfortable working within a diverse team environment.
 
Job Number: CT39321
Job Location: Stratford, CT
Rate: 40.00
Per Diem: Possible
Overtime: Possible
Duration: 1 year
Input Date: 10/12/2017
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Bill Carriveau
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Instrumentation Lab Technician -

Description:
Instrumentation Lab Technician

Duration: 12 month contract

Location: Stratford, CT



Job Description:

Work from Engineering Requests, Procedures and Drawings with limited guidance; to Fabricate, Install, Check-out, Diagnose, and Trouble-Shoot Instrumentation Data Acquisition Systems and Sensors in support of Ground and Flight Test Programs.
Must be able to accomplish the planning, build up and termination of cable harnesses associated with Instrumentation Systems.
Must be able to assist in performing system calibrations and check outs with the Test Engineer. Must be able to support Sensor calibrations Experienced Instrumentation Technician in both Rotary Wing Structural Ground and Flight Test.
Should possess a strong Mechanical and Electrical background familiar with Strain Gages and their circuitry , thermocouples, linear displacement and vibration transducers, measurement systems, instrumentation wiring and documentation
 
Job Number: 357321
Job Location: Stratford, CT
Rate: $45hr
Per Diem: yes
Overtime: possible
Duration: 12 months
Start Date: asap
Input Date: 10/19/2017
Firm Name: JOHNSON SERVICE GROUP
Attention: Rich Martinsen
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

Integration Specialist Technician

Description:
PDS Tech is seeking an Integration Specialist Technician for an open position in Huntsville, AL.
In your role, you will:

  • Perform assigned duties as an individual or as a member of a crossfunctional High Performance Work Team (to include supplier and customer representatives), during all phases of assembly, integration and test from developmental prototyping to the execution of production integration activities. Meet customer satisfaction requirements for quality, performance and reliability.
  • Perform functional checkouts and system testing of electrical, electronic, mechanical systems and ground support equipment. Troubleshoot, fault isolate and document nonconformances to correct malfunctions, to component level, with minimal technical support. Perform, as required, approved rework, modification, repairs and incorporation of changes per technical documentation and formal direction to electrical, electronic and mechanical systems.
  • Assist in defining, implementing, completing and monitoring the execution of the work scope. Make recommendations for refinement to equipment and integration processes by conducting studies and evaluations that result in product and process improvements.
  • Analyze product, process & test data, and rejection history to identify root cause for problems and assist with developing corrective action.
  • May be required to perform duties in and around ordnance or other hazardous materials while maintaining a safe working environment. May be required to obtain a security clearance, per specified program requirements.
  • Perform all elements of mechanical, electrical and electronic assembly, integration and test from detail fabrication, buildup of assemblies & subassemblies, through final integration.
  • Select correct parts, materials and tools to perform assigned duties. Duties may include the handling of hazardous waste (if qualified). Handle and protect components and assemblies in accordance with proper practice and procedures.Move materials from place to place within the work area.
  • Perform critical handling tasks and operate special electrical, electronic, mechanical and support equipment. Use and operate shop tools and equipment including precision measuring instruments and equipment including optics and lasers. Operate various types of shop equipment such as band saw, drill press, sander, bench grinder, metal bending equipment and other related machinery on a variety of materials.
  • Perform assembly work to complete assignments. Related tasks may include fabrication, installation, adjustment, fit check, fastener alignment, connections, and subassembly integration of parts and materials.
  • Perform chemical cleaning, surface finishing, painting, marking in accordance with specifications and procedures.
  • Use any electrical and electronic test equipment, instruments and tools required to perform assigned work, including precision measuring instruments and equipment. Connect, operate and/or verify support equipment, set up and check out of electrical, electronic and mechanical systems.
  • Troubleshoot, fault isolate and document nonconformances.
  • Perform related rework and approved repair necessary to accomplish assignments
  • Devise, develop and assemble approved shop aides and devices that may be required to adjust, test or maintain electrical and mechanical systems equipment.
  • Perform self examination and inspection as certified and required.
  • Plan, sequence and organize work operations to meet production schedules and expedite special jobs.
  • Coordinate information to advise others of situations or conditions that will delay work progress and suggest corrective action.
  • Assist others in the performance of their assigned work giving technical assistance to specifications and requirements as required.
  • Set up and maintain charts, logs, records and reports.
  • Maintain licenses, permits and certifications required to perform assigned work.
  • Perform other duties as assigned within the general job classification
  • Maintain a safe clean and orderly work area.

As our ideal candidate, you will meet the following requirements:
  • High School Diploma or GED
  • Possess technical skills necessary to perform work using detail work instructions & other released planning documentation and a variety of other supporting technical documentation as required including but not limited to: technical drawings, 2D & 3D models, schematics, circuit/wiring diagrams, process and equipment specifications, photographs, illustrations and sketches.
  • Must be a U.S. Citizen.





 
 
Job Number: 1610054052
Job Location: Huntsville, AL
Per Diem: No
Duration: 6 months
Input Date: 05/25/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002CGGpAAO&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Interior Design Engineer (3 openings)

Description:
Interior Design Engineer
3 openings

Location: Southeast
Contract duration: 12+ months
Rate: Open, DOE

General Summary:
The Interior Design Engineer will perform interior design engineering for cabin & cockpit structures, components, and trim for aircraft. This includes requirements definition for the entire interior including liners, monuments, and seats. Familiarity with FAA certification requirements pertaining to aircraft interiors and human factors is desired. The individual will also support production aircraft completions and supply chain as needed to clarify requirements and provide dispositions to engineering deviations. Most important is the desire to work as a key contributor to the overall engineering organization and provide our customers with the world’s most advance aircraft.

Duties and Responsibilities:
1. Creates conceptual designs for interiors of the aircraft through 3D modeling software (CATIA), drawings, and/or drafting application.
2. Develops designs for form/fit/function to meet customer and design criteria.
3. Provides designs for the fabrication process including sheet metal, extrusions and inject molding
4. Familiarity with structural analysis methods, load paths, and material properties
5. Validates engineering designs per engineering core principles, design standards, processes and industry best practices.
6. Makes recommendations to engineering lead/management.
7. Researches and maintains up to date knowledge of technical data pertaining to cabin, cockpit structures, hardware, material, and finishes.
8. Ensures adherence to program schedule.
9. Performs other duties as assigned.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors’ degree in Mechanical, Aerospace or Civil Engineering from a four year college or university is required. (In lieu of degree, management may elect to consider individuals with a equivalent years of combined experience and training.)
2. Masters’ degree in Engineering preferred.
3. Minimum of 3 years with a maximum of 20 years engineering design experience directly related to mechanical/interior design for commercial aircraft required.

Knowledge, Skills and Abilities:
1. Working knowledge of conceptual design development of aircraft interiors.
2. Working knowledge of industry standard (i.e. - parts lists, bill of materials, parts and standards callout, etc).
3. In-depth knowledge of Geometric Dimensioning and Tolerancing (GD&T).
4. Familiarity with 14CFR Part 23/25.
5. Proficiency in CATIA V5 workbenches or equivalent 3D modeling tools (i.e. - Solidworks, Unigraphics, etc).
6. Proficiency in Teamcenter (or equivalent PLM tool).
7. Ability to work independently or within a team environment.
8. Ability to communicate effectively throughout all levels within an organization and present data clearly and concisely.
9. Ability to work cross functionally with Quality and Production to resolve issues on the production line.


Physical Requirements:
1. Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
2. Incumbents may be required to stand, sit, squat, walk, bend, climb ladders, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
3. Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
4. Read, hear, speak, and see with no restrictions, as required by job duties.
5. Comprehend and adhere to management directions and/or safety instructions with no restrictions.
6. Effectively communicate in Business English language.
7. Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.
8. Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties.

The Structures Company is an AA/EOE.
 
Job Location: southeast, southeast
Per Diem: yes
Overtime: possible
Duration: 12+ month
Start Date: asap
Input Date: 09/29/2017
Firm Name: STRUCTURES COMPANY LLC
Attention: Mark Sharp
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Lead Mechanics

Description:
Currently hiring Lead Mechanics for on of the TOP MRO facilities located in Kansas City, Missouri.

Lead Roles Open:
Systems Mechanic
Interior
A&P
Composite
Structures

A&P Required for all lead roles. 3- 5 years experience in an MRO facility. Commercial aircraft background.
 
Job Location: Kansas City, MO
Input Date: 10/03/2017
Firm Name: APA SERVICES
Attention: Kami M Muehlberger
Address: 4150 INTERNATIONAL PLZ STE 510
City, State: FORT WORTH, TX 76109
800 Phone: 888/272-7868
Fax Phone: 800/285-8805
Website: www.apaservices.net

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Lead Project/Design Engineer

Description:
Seeking a Sr. TCO Engineer in Milwaukee, WI.

Job Description:
As a Senior TCO Engineer, reporting to the FLC Engineering Director, you will lead cross-functional project teams in Mortara to complete design engineering and/or supply chain consolidation projects from planning through implementation. You will also perform mechanical engineering activities related to your projects.

Responsibilities:
o Project Scoping & Planning
o General Project Management (forming project teams, budgeting, assigning & tracking
tasks, identify & mitigating project risks, etc.)
o Update mechanical CAD drawings using Pro-E
o Review of Design Inputs and Outputs
o Evaluating and Applying Regulatory Standards
o Lean and Continuous Improvement Initiatives
o Manage one engineer
o Performs other duties as requested
Requirements:
o 5-10 years of applied project management experience
o Experience as a team lead managing multiple projects and coordinating activities (schedules, resource, budgets, etc.) between multiple project managers, preferred.
o The ability to analyze, modify and create mechanical designs is a plus
o Applied experience with Microsoft Project as well as other Office Suite applications
o Prior SAP experience preferred (including DIRs, BOMs, MMDS, and Engineering Changes)
o Demonstrated ability to communicate and negotiate with a diverse group of cross-functional stakeholders in Marketing, R&D, QA, Regulatory, Sourcing, and Operations.
o Well-versed in Medical Device Design Controls.
o Strong communication skills and attention to details
o Ability to lead and coach other team members in the spirit of cross functionality
Education:
o Bachelor's degree in Engineering\
Schedule:
Must be available to work any shift.
 
Job Number: 164867
Job Location: Milwaukee, WI
Rate: $52.94
Duration: 6 Months
Start Date: ASAP
Input Date: 10/03/2017
Firm Name: CHIPTON ROSS
Attention: Debbie Aubert
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MECHANICAL ENGINEER - DESIGN/ANALYSIS/SUSTAINING -

Description:
Johnson Service Group (JSG) is searching for a Mechanical Engineer with a strong background in design, analysis, and sustainability, to assure the performance of hydraulic actuation components, currently in service on commercial and military aircraft.

Summary of Job Scopes:

3-6+ years of related mechanical sustaining engineering experience, ideally with hydraulic actuators and hydraulic control valves, or similar products for the Aerospace Commercial and and Defense industries.
Requires mechanical engineering expertise with hydraulic control valves and hydraulic actuators.
Working knowledge of gears is a plus.
A qualified candidate will interface with the Quality Assurance and After-Market Organizations to support the investigation of field failures or internal proposed changes.
Responsible for interfacing with design and analysis engineering organizations to implement proposed design changes.
Requires working knowledge and understanding of requirements verification processes to assure the successful implementation of any proposed design changes.
Responsible for assuring the existence of artifacts that document the verification of any proposed design changes.
Position requires a working knowledge of data configuration management and change control process.
Responsible for interfacing with configuration management organization to assure the release and control of relevant configuration data.
Requires working knowledge of aerospace standards, i.e. relevant SAE ARP, FAA regulations & guidance, military standards, etc.
Working knowledge of ATA 2000 is a plus.
Responsible for determining the effort (hours) and the duration (time) required to generate all technical support for the sustaining activities.
May carry out complex or novel research assignments requiring the development of new or improved techniques and procedures.
May promote and implement process improvements company-wide.
May write product standards and design guidelines.
Required Skills and Expertise:

Fishbone - Ishikawa diagrams / Fishbone Diagrams, Herringbone Diagrams, Cause-and-effect diagrams
8D (8 step problem-solving process)
Systemic Solutions
A3 - a structured problem solving and continuous improvement approach, first employed at Toyota and typically used by lean manufacturing practitioners
Root Cause Corrective Action (RCCA)
Lean Six Sigma
Step-by-step troubleshooting
Education:

Bachelor's Degree in Mechanical Engineering or a similar technical discipline
 
Job Number: 360481
Job Location: Duarte, CA
Rate: $46
Overtime: possible
Duration: 12 months
Start Date: asap
Input Date: 10/19/2017
Firm Name: JOHNSON SERVICE GROUP
Attention: Rich Martinsen
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MP&P Engineer I / II / III / IV - (MO)

Description:
SEVERAL OPENINGS IN THE ST. LOUIS, MO AREA

Active Secret Clearance NOT REQUIRED to start.

Responsibilities:
1. Candidates will provide support to St. Louis production programs and development projects in the areas of robotics/automation, production equipment, mechatronics, process development, and mechanical drilling/fastening/inspection/assembly technologies.
2. Candidates will support operations across composite fabrication, paint operations, and assembly operations in support of multiple aircraft and weapons programs.
3. Candidate has considerable latitude in determine technical objectives of assignments and will represent the organization as a prime technical contact on manufacturing technologies and MR&D projects.
4. Candidate will interact with senior external personnel on difficult technical matters and represent the organization to internal senior management levels.
5. Candidate will provide technical solutions to a wide variety of complex problems that require ingenuity and creativity.

Typical responsibilities will include:
1. Apply knowledge of engineering and scientific principles to aircraft design efforts, production operations improvements, develop and implement wide range of technologies, and reduce costs of aircraft assemblies.
2. Review engineering documents, drawings, and support design reviews to ensure proper selection and specification of equipment and processes for part fabrication, paint, and assembly operations.
3. Evaluation of new technologies for potential application to business needs. Performing TRL & MRL assessment on technologies proposed and/or procured for production.
4. Work directly with engineering, manufacturing and suppliers to perform manufacturing process improvements and implement robotics, automation, and manufacturing technologies to achieve cost reductions.
5. Coordinate with supplier management for purchase of production equipment
6. Create and manage project schedules and coordinate technology integration activities with program support teams.
7. Help resolve programmatic and technical problems that would affect cost, schedule, and performance.
8. Support root cause and corrective action reviews by conducting engineering investigations for fabrication and/or assembly issues.

Additional Information:

Successful candidates will have strong communication skills and be a highly motivated self-starter who can apply engineering skills to current production support requirements and MR&D projects. Interaction with customers (internal and external) and suppliers to coordinate and resolve production technical issues on a frequent basis.

Participate as a team member in Integrated Product Team projects. Work under general supervision of more senior technical engineers. Occasional travel to vendor facilities, technical conferences, or technical exchange meetings is required.

Bachelor's degree, or Master's Degree, or PhD.
 
Job Number: MP&PMO
Job Location: Berkeley, MO
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 12/01/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MP&P Engineer IV - (AL) - ACTIVE SECRET CLEARANCE

Description:
ACTIVE SECRET CLEARANCE REQUIRED TO START.

The Strategic Missile & Information Systems Parts Materials & Processes (PM&P) team is a Specialty Engineering function which provides expertise in EEE, mechanical, metallic and non-metallic parts, materials and related processes as well as survivability. The PM&P subject matter experts are responsible for working with program designers, IPTs and subcontractors to select parts, materials and processes that meet program designated PM&P requirements along with supporting part testing, failure analysis and mitigation development as well as performing supplier compliance assessments and development of all required plans. Additionally, the subject matter experts will support all Parts, Materials, & Processes Control Board (PMPCB) related functions including reviewing of Non-Standard Part Approval Requests and relevant data, PMPCB working groups and board meetings and interfacing with both the customer and subcontractors in support of the PMPCB.

Field of expertise must be electrical engineering, materials science and/or engineering, physics or equivalent. Applicants must have prior knowledge of military and industry parts and materials specifications, bills of materials, obsolescence, and have coordinated activities with suppliers.

It is desired that applicants have prior experience working with defense contractors, parts, materials, & processes mission assurance plans. Some working knowledge of ionizing radiation effects and testing is also preferred.

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

We also have full Medical/Dental, Life, Vision, and 401k.
 
Job Number: MP&Pal
Job Location: Huntsville, AL
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 10/13/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Engineer- Full Time

Description:
DATE: 10/5/2017
TITLE: MRB Engineer FULL TIME
SERVICE: Cleveland
IMMEDIATE SUPERVISOR: Engineering Manager


JOB SUMMARY
Reporting to the Engineering Manager, the MRB Engineer identifies, analyzes verifies and gives a provision on the integrity of rejected landing gear components. He/she determines the actions to be taken with manufactured parts or repair and overhaul components which become non compliant to customer requirements and within a short delay in order to minimize financial impacts and delivery delays.

Working in a dynamic environment, rich in operational complexity, we are seeking to find an MRB Engineer who is strong in technical problem solving, can demonstrate sound judgement, and acumen for organization and communication at various levels of responsibility.


We have a long-term contract with The Boeing Company to supply complete landing gear systems for the Boeing 777 and Boeing 777X program. This contract is the largest ever awarded to our landing gear operations.

RESPONSABILITIES
The MRB Engineer:

- Evaluates and analyzes defects in parts from technical documents such as drawings, technical repair manuals (TO), customer specifications, stress reports in order to gather all the necessary information for the acceptance or rejection of a part that no longer meets standards during production.

- Ensures that the parts are structurally adequate by calculating constraints and safety factors or by asking the stress engineering department in order to make a final decision.

- Ensures that the assembly function is not affected by verifying the functional and structural aspects of the rejected part and develop a method for possible repair or condemning the part.

- Completes documentation of non-compliances with a final provision that meets customer requirements.

- Communicates if required any additional information to customers.


QUALIFICATIONS
- Mechanical or Aerospace Engineering Degree
- Minimum of five (5) years experience in the aerospace industry