Job Search Results

204 listings were found that matched your search words: Keywords: Aircraft ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2024/03/28 Thursday 03:46AM Pacific Time by ContractJobHunter. )

Listings 1 - 204

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
10 Structural Design Engineers - Savannah, GA

Description:
The Structural Design job is for placement on the Special Missions program. Candidates should be able to demonstrate strong competency in the following areas:
- Prior work experience in Savannah, GA with aircraft design and Special Missions green aircraft structural modifications preferred.
- Understanding of Airplane Structures and Service Histories
- Understanding of Design Requirements
- Among others, includes knowledge of the Part 25 Design and Construction regulations as well as design methods to increase product durability by preventing corrosion and fatigue.
- Understanding of Structural Behavior and Development of Good Load Paths.
- Understanding of Joints and Fastening.
- Understanding of Materials
- Knowledge of metallic structures required. Knowledge of composite structures preferred.
- Understanding of Manufacturing Capabilities - Focus on design for manufacturing and assembly (DFMA).
- Understanding of Design Process - From requirements gathering and planning, layouts, design cycle, to workflow release.
- Required experience with 3D Model Based Definition (3D MBD) and the application of Geometric Dimensioning and Tolerancing (GD&T) for details and assemblies. Proficiency in CATIA v5 workbenches: part design (machined parts), sheet metal, Fibersim, Composite Part Design (CPD), FT&A, Generative Drafting (2D Drawings). Proficiency in SmarTeam PLM database.

Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

The Structures Company LLC is an AA/EOE
 
Job Location: Savannah, GA
Rate: $60-72/hr
Per Diem: Yes
Overtime: Possible
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
15 Stress Engineer Openings - Savannah, GA

Description:
15 Stress Engineer Openings in Savannah, GA. Prior history working in Savannah, GA a huge plus.
Requirements:
- Static and fatigue analysis of primary and secondary airframe structure of metallic construction experience.
- Strong background in classical stress analysis.
- Experience with Catia V5 to support stress analysis and drawing release.
- Experience with reviewing 2D drawings.
- Skills in Microsoft Word and Microsoft Excel
- Ability to work independently under limited supervision.

Preferred:
- Experience with aircraft modifications and repairs (STC, MRB, or Service) preferred.
- Static analysis of composite structure, preferably with experience using analysis methods in Savannah, GA
- Composite allowable testing and certification requirements.
- Experience with Patran/Nastran is a plus.
- Strong preference for engineers that enjoy working in a collaborative environment.

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

The Structures Company LLC is an AA/EOE.
 
Job Location: Savannah, GA
Rate: $70-80/hr
Per Diem: Yes
Overtime: Possible
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
3 Aircraft Stress Engineers with Composites

Description:
3 Aircraft Composite Stress Engineers Needed.
Require 10+ years of aircraft/aerospace stress analysis with a good composites background.
Previous FEMAP experience is a plus.
Composite airframe analysis experience a MUST.
MUST be US Persons

Qualifications:
-Experience in aircraft or spacecraft composite, design and analysis processes
-Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures
-Minimum 10 years or more of applicable experience in the analysis of structural systems using strength of materials and finite element based methods
-Experience with free-body diagrams and classical stress analysis techniques
-Experience with FEMAP
-Rapid prototyping experience a strong plus
-Excellent computer skills, including Outlook, Word, Excel and PowerPoint
-Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
-Applicants must be U.S. persons as defined by ITAR
Educational Requirements-
Bachelors degree from an accredited institution, with a concentration in a relevant Engineering discipline

The Structures Company is an AA/EOE.
 
Job Location: Mojave, CA
Rate: $80-85/hr DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Last Updated: 01/04/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Maintenance Controllers

Description:
STS Technical Services is hiring Aircraft Maintenance Controllers in Ypsilanti, Michigan.

Job Duties:
Coordinate efficient and economical maintenance operations by providing technical assistance to guide personnel during maintenance and troubleshooting.
Ensure that maintenance activities are conducted in compliance with General Maintenance Manual (GMM), various company manuals, and FAR’s.
Maintain and issue control numbers, and complete required paperwork, for Deferred Maintenance Items / Minimum Equipment List. (DMI/MEL), Configuration Deviation List (CDL) and Carryover Items (COI).
Maintain the current DMI/MEL, CDL, COI status in the MISA database for tracking and communication.
Perform other duties as assigned by the Maintenance Control Manager.
Qualifications:
High school graduate; some college and/or technical school desirable
Good working knowledge of world geography and flight operations required
Must have an valid A&P License
Experience working heavy transport aircraft (preferably 747-200 and 400 aircraft)
Ability to use and understand wiring diagrams, maintenance manuals, troubleshooting manuals and parts manuals
Good computer skills and verbal communication skills
Maintenance Control experience is preferable but not required
Benefits:

STS Technical Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-800-359-4787.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 34701
Job Location: Ypsilanti, MI
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: Jennifer Piotroski
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Sheet Metal Mechanics

Description:
STS Technical Services is hiring Aircraft Sheet Metal Mechanics in Bridgeport, West Virginia. 

Duties & Responsibilities:
Comply with environmental health / safety policies / procedures, participate in 5-S activities and perform work in a safe and timely manner
Remove / install aircraft components as required
Fabricate and or modify structural modifications on aircraft part
Perform minor structural repairs on composite components either attached or detached
Assist in conducting hidden damage inspection of aircraft structures
Assist with complex structural repairs either on or off aircraft
Operate ground support equipment as required
Assist with aircraft component repair
Perform mechanical / electrical removals and installations as required
May assist with maintenance at off-site locations
Assist in wing removal as required
Assist maintenance as required
Inspect confined areas of airframe
Assist in designing, modifying and welding metal fixtures as required
Assist in providing time estimates as required
Fabricate sheet and/or composite components
Our Ideal Candidate Will Have:
You have a minimum of 2-5 years of structural sheet metal repair / modification experience or substantiated similar experience
You have an A Certification, or A & P Certificate or Repairman Certificate
You have completed Sheet metal A/C Tech school or equivalent schooling
You have the ability to interpret and work with mechanical engineering drawing
You have the ability to  effectively communicate in both written and verbal form on individual and / or aircraft status
You own Basic set of hand tools with the ability to demonstrate Inventory & control of tools
You must obtain appropriate Ground Support Equipment Qualifications as required
You have the ability to work unscheduled overtime including nonscheduled work days and holidays
You have the ability to work in seasonal/inclement weather outside
About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 35248
Job Location: Bridgeport, WV
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: Johnny Cruz
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Cockpit Systems Engineer

Description:
The Systems Engineer, Cockpit Avionics will be responsible for some or all systems related to:
• System 23 – Communication
• System 31 – Indicating and Recording Systems
• System 42 – Integrated Modular Avionics
• System 45 – Central Maintenance Systems
• System 46 – System Integration and Display

***Systems Engineers MUST HAVE experience with a direct design role in a program that has certified a new aircraft***

Responsibilities:
• Generate, review, approve, and manage system requirements – including but not limited to regulatory, safety, human factors, design, environmental, manufacturing, quality, operational, and service requirements
• Serve as the system-level expert for integration and coordination activities with various departments and the certification authorities
• Conduct multi-disciplinary design reviews throughout the different phases of development, certification, and production readiness as required to coordinate and communicate system design projects
• Conduct trade studies, analyses, and test programs as necessary to validate system architectures meet all requirements
• Generate, review, and approve
• System safety analyses, such as FHAs, FTAs, CCAs, etc.
• Engineering drawings, schematics, and design specifications
• System and equipment test plans and reports
• Compliance documentation
• System engineering processes
• Coordinate as required to execute and manage system design projects, testing, certification, production readiness, etc.
• Work with various company departments to ensure equipment and low-level designs meet all system and aircraft-level requirements.
• Various project management tasks as required

Required:
• Skilled at creating and reviewing technical schematics, logical and functional diagrams, and engineering specifications
• Previous experience with aircraft systems
• Working knowledge of 2X.1309 analyses and processes, including Advisory Circular 23.1309-1E, SAE ARP 4761, and SAE ARP 4754A
• Working knowledge of DO-160G environmental qualification
• Excellent problem solving, communication, and technical writing skills
• Basic knowledge of FAA regulations and guidance material and industry standards
• Bachelor of Science in Engineering required; Electrical, Mechanical, or Aerospace Engineering preferred
• Proficient in English
• Proficient with Microsoft Office and Google Docs

Desired:
• Working knowledge of avionics and related equipment, technical standard orders, and minimum performance standards
• Working knowledge of DO-178C and DO-254 processes and aviation database management
• Previous experience managing complex sets of requirements
• Previous experience preparing and presenting design reviews for complex, highly integrated systems
• Previous experience defining system controls, crew indications, and flight manual procedures
• Previous experience in testing, including instrumenting, data acquisition, and documenting and analyzing results
• Whole-aircraft FAA certification program experience, Part 23 or Part 27 preferred
• Experience and involvement with industry groups to develop consensus standards
• 5+ years of relevant industry experience
• Private pilot certificate or higher
• Familiar with Dassault Systèmes engineering and management tools

POSITION MAY INCLUDE ACCESS TO TECHNOLOGY THAT IS SUBJECT TO U.S. EXPORT CONTROLS.



The Structures Company is an AA/EOE.
 
Job Number: 376
Job Location: Northern CA
Rate: OPEN - **DOE**
Per Diem: Yes
Duration: DIRECT POSITION
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Technician

Description:
Seeking avionics technicians with wire harness & LRU fabrication, integration, and functional check out experience on live aircraft Preferred.

IPC 620 / IPC-J-STD001 and J standard certification with pin out, soldering, crimping, solder sleeve experience, continuity checks, and troubleshooting on aircraft.




The Structures Company is an AA/EOE.
 
Job Number: 408
Job Location: Mojave, CA
Rate: ***DOE***
Per Diem: Possible
Overtime: Possible
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Certification Engineer - Avionics and Electrical

Description:
Certification engineers will work closely with multiple design engineering and test teams to ensure designs comply with all federal airworthiness regulations. This position requires a solid understanding of aircraft systems, system development, and industry-specific certification processes. It is preferred that this individual be an FAA DER or candidate. The most important traits are attitude towards the project, hard work ethic, and being able to self-manage and learn new skills. Forward thinking will be highly regarded as well.

The Avionics and Electrical Systems Certification Engineer will be responsible for certification aspects of some or all systems and equipment related to:
• Communications
• Electrical Power
• Indicating and Recording Systems
• Lights
• Guidance, Navigation, and Surveillance
• Cabin Systems
• Systems Integration
• Air Vehicle Wiring

Responsibilities
This position will be responsible for:
• Determining and interpreting the certification basis and establishing compliance strategies – including means and methods of compliance.
• Developing, reviewing, and approving certification-related documents, including:
• Issue Papers, Special Conditions, Equivalent Levels of Safety, etc.
• Certification Plans and Summaries
• Test Plans and Reports
• Design and Analysis Reports
• Requests for Conformity, Statements of Compliance
• Working with and mentoring multiple engineering teams with a mix of aerospace and non-aerospace backgrounds to:
• Establish relevant design development and certification plans that will support Type Certification.
• Convey and document requirements in a way that clearly breaks down the regulations and guidance material.
• Develop engineering specifications for avionics and electrical systems and equipment.
• Review designs, develop solutions, and ensure compliance with the airworthiness standards.
• Planning out test campaigns, overseeing test article fabrication, and witnessing tests in order to demonstrate that applicable designs show compliance with airworthiness standards.
• Interfacing with certification authorities as required (FAA, EASA, etc.).

Required
This position requires candidate to have or be:
• Expert-level understanding of design standards and verification methods for electrical systems and equipment.
• Expert-level understanding of RTCA/DO-160 Environmental Conditions and Test Procedures for Airborne Equipment.
• Previous FAA certification experience with electrical systems and equipment.
• Basic knowledge of 2X.1309 analyses and processes, including Advisory Circular 23.1309-1E, SAE ARP4761, and SAE ARP4754A.
• The ability to question traditional assumptions in the application of regulations, guidance material, and engineering specifications.
• The ability to read, review, and create technical schematics, engineering specifications, and engineering drawings.
• At least 10 years of relevant aviation or aerospace industry experience.
• A Bachelor of Science in an applicable engineering discipline.
• Proficient in English.
• Proficient with Microsoft Office products.

Desired
The ideal candidate for this position will have or be:
• An FAA Designated Engineering Representative (DER) – Systems and Equipment (Electrical Equipment).
• Whole-aircraft FAA certification program experience, Part 23 or Part 27 experience preferred.
• Experience in testing including instrumenting, data acquisition, and documenting and analyzing results.
• Experience and involvement with industry groups to develop consensus standards.
• A private pilot certificate or higher.
• Familiar with Dassault Systemes engineering and management tools.



The Structures Company is an AA/EOE.
 
Job Number: 379
Job Location: Northern CA
Rate: OPEN - **DOE**
Per Diem: Yes
Duration: DIRECT POSITION
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Chief Electrical Engineer - Lead

Description:
We need a talented electrical engineering lead with a demonstrated track record in designing complex electrical systems on safety critical vehicles. This lead will work closely with mechanical, software, and other cross-functional leads to oversee the electrical architecture of an all-electric VTOL aircraft, including but not limited to high-voltage powertrain systems, low-voltage electronics, and high-speed data transmission. Directing teams to optimize designs for reliability, weight, efficiency, and certification will be a focus.

Responsibilities
· Oversee the design, development and execution of the aircraft’s electrical systems.
· Own the requirements for the aircraft’s electrical architecture.
· Collaborate with various company departments to ensure equipment and low-level designs meet all system and aircraft-level requirements
· Lead, train and mentor the electrical engineering team.Required
· Experience bringing electrical hardware involving high-speed and high-voltage design from concept to production.
· Strong EE fundamentals, including familiarity with high-voltage power conversion and distribution, motor control, signal conditioning and conversion, discrete semiconductor design, and low-voltage power distribution.
· Hands-on experience with building and debugging electrical hardware.
· 10+ years of related technical lead experience.Preferred
· Experience leading a team of engineers to bring a piece of electrical hardware from concept through the design assurance and certification process (DAL, ASIL, SIL).
· Understanding of RTCA DO-160 and practical design guidelines for meeting required environmental qualification levels for airborne electrical hardware.



The Structures Company is an AA/EOE.
 
Job Number: 380
Job Location: Northern CA
Rate: OPEN - **DOE**
Duration: DIRECT POSITION
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Structural Design/CPD/Composite Workbench

Description:
Perform preliminary and detail design of composite airframe structures, structure layout and design for manufacturability.
Experience designing composite primary aircraft structures utilizing Catia v5 is a MUST.
CPD/Composites Workbench experience is a huge plus.
Fibersim is acceptable if no CPD experience.
MUST BE US PERSON
Establish manufacturing tolerances for production of structural components using GD&T.
Participate in the Engineering definition review, approval and release process
Support the review of manufacturing plans and procedures to ensure compliance with design requirements
Support the creation of structural test plans which will be used to verify manufacturing processes meet design intent and requirements.

The Structures Company LLC is an AA/EOE.
 
Job Location: Mojave, CA
Rate: $65-75/hr DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Control Systems Engineer

Description:
Tasks include analysis and testing of aircraft handling qualities, design of control laws, and development of simulation math models. This engineer will perform analysis and evaluation of total air vehicle stability and control characteristics to ensure acceptable handling qualities in compliance with specifications; apply control theory to the design of control laws that achieve desired characteristics for dynamic control response, gust or disturbance rejection, system failure robustness, and loads considerations; develop and validate both linear and nonlinear mathematical models of air vehicle and subsystem dynamics; and will use simulation and flight testing, including planning, data analysis and interpretation of test logs, to define handling qualities.
Qualifications
• B.S. + 3 years of experience, or M.S. in mechanical engineering, electrical engineering, aerospace engineering, computer science, or a related field
• Knowledge of aircraft flying qualities, flight dynamics, piloting control strategies, and flight control systems
• Proficiency in C/C++ desired
• Proficiency with MATLAB/Simulink desired
• Digital signal processing and controls education and/or experience desired




The Structures Company is an AA/EOE.
 
Job Number: 384
Job Location: Northern CA
Rate: OPEN - **DOE**
Duration: DIRECT POSITION
Start Date: April
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Doors, Equipment & Furnishings

Description:
Unique Skills:
1. The ideal candidate will be a proven design engineer with experience in Crew and Equipment (flight deck and avionics equipment installations, equipment racks, antennas, lights, acoustic and thermal insulation, honeycomb shelves, brackets, secondary structure, bonding and grounding) and Doors (main entry, emergency, service).
2. Must be proficient with Catia V5, Smarteam, and MS Power Point.
3. Candidate preferred to have experience with Gulfstream design, design revision, and project processes.
4. Experience with supplier joint design and qualification documentation is a plus.

Education and Experience Requirements:
1. Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. 10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

Position Purpose:
1. Guides successful completion of major engineering programs or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Principle Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues.
2. Is consulted extensively by associates and others as a recognized authority within the field.
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities.
4. Approach to problem solving balances technical product, cost and schedule.
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results.
6. Exercises latitude in determining technical objectives of assignments and makes decisions and recommendations that are recognized as authoritative.

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
2. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 12499
Job Location: Savannah, GA
Rate: $66.00 - $72.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6+ mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ECS Engineer

Description:
Candidates should have experience with:
- Aircraft environmental control systems, components and installations
- Cabin pressurization control systems
- Engine bleed air systems
- Liquid cooling systems for special missions applications
- FAA Part 25 certification of system components, including qualification and test plans, data analysis, and reporting
Special Missions

All applicants must be U. S. Citizens or permanent residents of the U.S.
 
Job Number: 155059
Job Location: Savannah, GA
Rate: 60-65 hourly
Per Diem: yes
Overtime: yes
Duration: L-T
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: P O BOX 965280
2886 SANDY PLAINS RD

City, State: MARIETTA, GA 30066
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ECS Engineer

Description:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Candidates should have experience with:
• Aircraft environmental control systems, components and installations
• Cabin pressurization control systems
• Engine bleed air systems
• Liquid cooling systems for special missions applications
• FAA Part 25 certification of system components, including qualification and test plans, data analysis, and reporting

Education and Experience Requirements:
• Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.

Essential Functions:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
 
Job Number: 24-434
Job Location: Savannah, GA
Rate: $60-$65
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ECS Engineer - Special Missions

Description:
Candidates should have experience with:
- Aircraft environmental control systems, components and installations
- Cabin pressurization control systems
- Engine bleed air systems
- Liquid cooling systems for special missions applications
- FAA Part 25 certification of system components, including qualification and test plans, data analysis, and reporting

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 12501
Job Location: Savannah, GA
Rate: $60.00 - $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6+ mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
Seeking an experienced electrical engineer to take ownership of several key components. This role requires the candidate to thrive in a high paced environment and will have an integral role in advancing the next generation of electrically powered vertical lift aircraft.
Roles and Responsibilities:
Define: Generate conceptual layouts for critical systems. This includes high voltage systems to drive BLDC motors and low voltage systems to control key elements of the avionic and vehicle management systems. It is desired for the candidate to specifically take ownership of analog & digital circuits (MOSFETs, op-amps, switching regulators, gate drivers, microcontrollers, SPI, I2C, etc) for high power BLDC drive motors as other systems such as electro-mechanical actors. The candidate will participate in initial equipment conceptual development and carefully balance product specifications, process requirements, and lead-time limits. The engineer will define key requirements and take ownership of them through the design life-cycle.
Do: The Electrical Design Engineer will also take the lead designing a myriad of critical components that are the basis for the Butterfly Aircraft’s electrical propulsion systems. Areas of focus include BLDC motor drivers and the associated electrical components. The end application will require extreme levels of reliability and fault tolerance and therefore the systems and components designed by the electrical engineer will need to adhere to aerospace best-practices for flight critical vehicle management systems. Familiarity with DO254 and DO178 is desired. The ideal candidate will have a hand in developing new systems from the ideation stage and seeing them through to a flight-worthy component. Thus, the role will require experience designing, prototyping, and testing multiple iterations of the development PCBs and be competent in the skills and tools needed to undertake this effort.
Key Responsibilities:
• Start-to-finish hardware ownership: Specification, architecture, design, simulation, schematic, layout supervision, prototype, validation, and manufacturing of circuit boards. Thoroughly document design requirements, calculations, power budgets, validation results, etc. Rapidly iterate as design requirements and system features mature.
• Circuit board design: Develop the specification, architecture, and design of electronic circuits for motor control including consideration of processor requirements and integration, system timing and bus loading. Work hand in hand with the embedded systems lead and software counterparts to ensure success of the integrated system. Design hardware, source components, develop schematics, manage layout, and test prototypes to validate hardware.
• Testing and validation: Identify core test requirements and balance test time with test coverage. Interact with various design, manufacturing, and firmware teams throughout the project. Establish clear, concise hardware test plans, and identify necessary test sequences and functional verification testing.
Secondary Responsibilities:
• Establish great working relationships with team members and cross functional teams.
• Create electrical panel schematics and work closely with builders to checkout wiring and quickly correct mistakes.
Intrinsic: The role will require constant flexibility and a level of comfort working in a rapid-prototype environment. The projects and assignments will vary from week to week, so the candidate should ideally have robust experiences to draw from (e.g. Aerospace, Electric Vehicle development, Motorsport/Formula One) in order to operate effectively in this environment. The role will include interfacing with engineering management, our customers, certification authorities, operations, procurement, external suppliers, and fellow engineers.
Required Qualifications:
• Master’s degree from an accredited university in Electrical Engineering or a related discipline with at least 5 years of professional experience in aerospace or a related field (i.e. electric vehicle development); or equivalent experience/combined education.
• Excellent circuit board design skills and an analytical mindset with a track record of demonstrated success developing actual products in a development environment.
• Experience in PCB schematic creation.
• Experience in electrical equipment selection and hardware integration/abstraction.
• Experience in electrical panel design and layout.
• Competent in electrical fundamentals.
• Familiarity with C, C++, Python, and/or Labview
• Well versed in the fundamentals of serial communication protocols (CAN, LIN, Ethernet, Bluetooth, DP, etc.)
• Experience with designing and testing to meet DO-160 Environmental Qualification requirements is desired.
• Experience with HW design that meets certification requirements for lightning strike and HIRF is advantageous.
• Experience overseeing and/or preparing electrical system compliance test plans and reports in support of aircraft certification, along with direct experience working with the FAA and/or FAA DERs, or past experience as an FAA electrical systems DER would be highly desirable.



The Structures Company is an AA/EOE.
 
Job Number: 399
Job Location: Southern, CA
Rate: $55-$70/Hr., **DOE**
Per Diem: Yes
Duration: 12 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
An Electrical Engineer job in Englewood, Colorado is available with one of Belcan's top aerospace clients. In this job you will research, design, develop, test, certify, deploy and improve cutting edge products and services. These cover a very wide range from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. You'll conceptualize and design new products and processes throughout the product life-cycle from analog and digital electronic circuit card assemblies to fully integrated systems.

Requirements:
* Bachelor's degree in Electrical Engineering or related Engineering discipline and at least 6 years of relevant experience
* Experience with database based drawing software (Zuken E3, Capital Harness, etc.)
* Background in the Aerospace and Defense Industry
* Experience composing and analyzing Electrical Load Analysis (ELA), circuit modeling, simulation and analysis
* Knowledge of industry standard electrical design principles, to include, but not limited to model-based definition, electrical component selection, manufacturing and production processes
* Familiar with Electro Magnetic Effects (EME) to include, Electro Magnetic Compatibility (EMC) and Electro Magnetic Interference (EMI)
* Experience in digital or analog circuit design and schematic capture
* Demonstrated knowledge of engineering principles and practices
* Experience working in multi-disciplinary design & development teams
* Experience with Computer Aided Engineering tools
* The ability to obtain and maintain a U.S. Secret Security clearance is required


If you are interested in this Electrical Engineer job in Englewood, Colorado please apply via the 'apply now' link provided. Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

 
Job Number: 302933
Job Location: Englewood, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Firm Name: BELCAN TECHSERVICES
Attention: BrianVidetic
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Engineer

Description:
General Summary:
The Electrical Systems Engineer provides expertise in support of electrical systems through all phases of a project, including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
• Design, development and certification support of the aircraft Electrical Power System, including power generation, distribution and energy storage
• Perform trade studies to determine optimal engineering solution
• Development and validation of requirements
• Design, plan and support of integration tests for laboratory and aircraft testing
• Provide technical support for troubleshooting, root cause analysis and corrective action
• Support of production, in-service and flight test activities
• Preparation and presentation of technical data in design reviews
• Preparation and presentation of change requests
• Review and approval of Qualification Test Plans, Procedures and Reports
• Provide support as required in the maintenance and update of the Electrical Test Laboratory
• Provide support as required in other areas of the Electrical Systems group, including cockpit controls and exterior/interior lighting
Qualifications

Education, Work Experience, Certification and/or Licensure:
• BS in Electrical Engineering from an accredited four year college or university program
• 8 years directly related experience involving design, development and certification of aircraft electrical power systems

Knowledge, Skills and Abilities:
• Knowledge of FAR Part 23 or 25 regulations
• Knowledge of advanced electrical power distribution systems preferred
• Knowledge of aircraft communication busses
• Knowledge of RTCA/DO-160, RTCA/DO-178B and RTCA/DO-254 processes
• Knowledge of aircraft wiring practices
Knowledge of aircraft bonding and grounding practices
Knowledge of system modeling tools preferred

The Structures Company is an AA/EOE.
 
Job Number: 372
Job Location: CA
Rate: $65+/Hr. **DOE**
Per Diem: Yes
Duration: 6 Month Contract to Hire
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical/Electronics Engineer - Long term, direct hire

Description:
Andromeda Systems Incorporated (ASI) is seeking full-time Electrical/Electronics Engineers to work in Jacksonville, FL. Engineers are responsible for providing technical assistance and guidance for operations and maintenance of electrical and electronic equipment for various DoD aircraft. These positions are located in Jacksonville, Florida.

Advantages of working with ASI in Jacksonville:
• Low cost of housing
• No state income tax
• Great area schools (St. John’s County)
• Great work environment
- Compressed and flexible work schedules
- Ability to work from home
- Diverse projects supporting multiple platforms
- Fantastic co-workers and customers

To Apply:
Visit https://androsysinc.com/careers/ to complete an application. Or use the contact email to submit your resume.

Responsibilities:
• Apply engineering principles to investigate, analyze, plan, develop, implement, test, and evaluate projects within the electronic engineering discipline
• Design, develop, and review schematics, systems, equipment, fixtures, and other technical requirements
• Prototype, validate and troubleshoot system installations
• Perform engineering investigations of failed electronic components and systems
• Determine requirements and technical specifications for modifications and/or purchase of new equipment
• Develop and maintain procedures for maintaining complex automated test equipment, new capability development, and process improvement
• Prepare and review engineering and technical analyses, reports, and other technical documentation
• Review technical publication deficiency reports and update publications as necessary
• Provide recommendations, designs, and report to Government representatives for final actions, review, and follow-up
• Review existing and/or development of new systems and tooling calibration/maintenance procedures
• Up to 10% travel may be required

Required Qualifications:
• Bachelor’s degree in Electrical/Electronics Engineering from an accredited college or university
• 3 years of Electrical/Electronics engineering experience
• Ability to use Excel, Word, Outlook, PowerPoint
• Effective communication and interpersonal skills

Preferred Qualifications:
• 10+ years of Electrical/Electronics engineering within the aviation, aerospace, or defense industry
• Experience with NAVAIR engineering and reporting procedures

Work Authorization/Security Clearance:
• Must be a U.S. Citizen and qualify for Secret Clearance
 
Job Number: 656
Job Location: Orange Park, FL
Rate: DOE
Per Diem: No
Overtime: Available
Duration: Long Term
Start Date: Available Now
Input Date: 11/14/2020
Firm Name: ANDROMEDA SYSTEMS INC
Attention: Stephanie Danti
Address: 330 CROSSING BLVD
City, State: ORANGE PARK, FL 32073
Phone: 904/402-8673
Website: www.androsysinc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Environmental Control System Engineer

Description:
Candidates should have general experience with:
- Aircraft environmental control systems, components and installations
- Cabin pressurization control systems
- Engine bleed air systems
- FAA Part 25 certification of system components, including qualification and test plans, data analysis, and reporting
- Coordinating with ECS suppliers to meet system and component design, test and certification requirements

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 12502
Job Location: Savannah, GA
Rate: $60.00 - $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6+ mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Environmental Control Systems Engineer

Description:
Candidates should have experience with:
- Aircraft environmental control systems, components and installations
- Cabin pressurization control systems
- Engine bleed air systems
- Liquid cooling systems for special missions applications
- FAA Part 25 certification of system components, including qualification and test plans, data analysis, and reporting.
 
Job Number: 20-155059
Job Location: GA
Rate: Up to $65.00 per hour
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FPGA Design Electrical Engineer

Description:
n this position the engineer will design and develop complex electronic hardware systems for aircraft. A major focus of this mission critical engineering role will involve developing aircraft electronic systems. The engineer will be responsible for Circuit design, Field Programable Gate Array (FPGA) programing, and Printed Circuit Board (PCB) and Circuit Card Assembly (CCA) designs working on a cross functional team. Working on a cross functional team the engineer will be working with mechanical and software design teams to develop a complete qualified flight tested aircraft solutions.

The engineer will have an opportunity have an impact on the following areas: Requirements analysis/derivation, concept development, hardware architecture, component selection, schematic capture, reliability analysis (derating, thermal, signal integrity, power integrity, stability, overstress), design verification, system integration, and qualification.

Basic Qualifications:
- A BS Degree in Electrical Engineering or closely related technical field or equivalent experience/combined education
- Experience with circuit design concepts
- Experience in circuit analysis, troubleshooting, test instrumentation, and data analysis tools
- Experience with Printed Circuit Board (PCB) board design and Circuit Card Assembly (CCA) design
- Experience with VHDL, Verilog, or System Verilog languages to support FPGA firmware programing
- The technical ability to effectively define and interpret system level requirements and derive the requirements necessary to interface between lab and hardware
- The ability to work well in a teaming environment with other disciplines (Systems Engineering, Software Engineering, Mechanical Engineering, etc.)

Desired Skills:
- Experienced using Xilinx and/or Microsemi FPGAs
- Experienced with design and simulation tools (Xilinx Vivado, Microsemi Libero, Mentor QuestaSim)
- Experience with Perl, Visual Basic, and C/C++,
- DO 178C/254 verification
- High Speed and RF design
- Cadence schematic capture, PCB layout Allegro
 
Job Number: 132470
Job Location: Fort Worth, TX
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Valerie White
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flutter & Dynamic Loads Engineer

Description:
Inconen is looking for a Flutter & Dynamic Loads Engineer for our client, a well-known Aerospace Company, in Savannah, GA.

Required:
1.Advanced knowledge and experience in aircraft aeroleasticity & structural dynamics modeling (10 years)
2.Advanced knowledge and experience with MSC Nastran and Patran (10 years)
3.Knowledge and experience with Matlab and/or Python for analytical and post test data processing (5 years)
4.Good general knowledge of 14 CFR, EASA & TCCA Part 25 requirements and certification (5 years)

As an Engineering Contractor in Flutter & Dynamic Loads, you will:
•Provide flutter solutions for aircraft nominal, parametric, failure and repair scenarios.
•Assess aircraft flutter margins and harmonize all levels of company and regulatory requirements to guarantee a safe aircraft aeroelastic design.
•Generate and analyze aircraft structural dynamic responses and corresponding load distributions for Tuned and PSD gust conditions.
•Generate and analyze aircraft structural dynamic responses and corresponding load distributions for engine fan blade out & windmilling conditions.
•Document completed analysis and findings in Engineering Reports for aircraft Certification.
•Support as required all relevant L&D customer interfaces within Engineering, Test and Certification including Flight Dynamics, Structures, Mass Properties, Flight Control Systems, Flight Test & CAO groups.

What you'll bring to the team:
•Extensive knowledge of aircraft aeroelasticity principles and concepts
•Good general knowledge of 14 CFR, EASA & TCCA Part 25 requirements and certification
•Advanced knowledge and experience in aircraft aeroleasticity & structural dynamics modeling
•Advanced knowledge and experience with engine fan blade out and windmilling dynamic analysis
•Experience with preparation for and execution of aircraft ground vibration tests
•Experience with preparation for and execution of aircraft flight flutter testing
•Experience with aeroservoelasticity is a plus
•Advanced knowledge and experience with MSC Nastran and Patran
•Knowledge and experience with Matlab and/or Python for analytical and post test data processing
•Knowledge and experience with one or more commercial or NASA CFD analysis toolsets
•Knowledge and experience with Unix and/or Linux
•Strong verbal and written communication skills, with prior experience in a project leadership role.
•An ability to clearly and concisely convey technical concepts to all technical and/or management levels
•Collaborate with internal & external customers on significant technical matters often requiring coordination between organizations
•Advanced degree in Aerospace Engineering strongly preferred

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 12514
Job Location: Savannah, GA
Rate: $70.00 - $77.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/19/2020
Last Updated: 11/19/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flutter and Dynamic Loads Engineer

Description:
Advanced knowledge and experience in aircraft aeroleasticity & structural dynamics modeling (10 years)
Advanced knowledge and experience with MSC Nastran and Patran (10 years)
Knowledge and experience with Matlab and/or Python for analytical and post test data processing (5 years)
Good general knowledge of 14 CFR, EASA & TCCA Part 25 requirements and certification (5 years)

As an Engineering Contractor in Flutter & Dynamic Loads, you will:
Provide flutter solutions for aircraft nominal, parametric, failure and repair scenarios
Assess aircraft flutter margins and harmonize all levels of company and regulatory requirements to guarantee a safe aircraft aeroelastic design.
Generate and analyze aircraft structural dynamic responses and corresponding load distributions for Tuned and PSD gust conditions.
Generate and analyze aircraft structural dynamic responses and corresponding load distributions for engine fan blade out & windmilling conditions.
Document completed analysis and findings in Engineering Reports for aircraft Certification.
Support as required all relevant L&D customer interfaces within Engineering, Test and Certification including Flight Dynamics, Structures, Mass Properties, Flight Control Systems, Flight Test & CAO groups.

What you'll bring to the team:
Extensive knowledge of aircraft aeroelasticity principles and concepts
Good general knowledge of 14 CFR, EASA & TCCA Part 25 requirements and certification
Advanced knowledge and experience in aircraft aeroleasticity & structural dynamics modeling
Advanced knowledge and experience with engine fan blade out and windmilling dynamic analysis
Experience with preparation for and execution of aircraft ground vibration tests
Experience with preparation for and execution of aircraft flight flutter testing
Experience with aeroservoelasticity is a plus
Advanced knowledge and experience with MSC Nastran and Patran
Knowledge and experience with Matlab and/or Python for analytical and post test data processing
Knowledge and experience with one or more commercial or NASA CFD analysis toolsets
Knowledge and experience with Unix and/or Linux
Strong verbal and written communication skills, with prior experience in a project leadership role.
An ability to clearly and concisely convey technical concepts to all technical and/or management levels
Collaborate with internal & external customers on significant technical matters often requiring coordination between organizations
Advanced degree in Aerospace Engineering strongly preferred

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
 
Job Number: 24-436
Job Location: Savannah, GA
Rate: $70 - $77/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 11/24/2020
Last Updated: 12/08/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flutter and Loads Engineer

Description:
Required: 1. Advanced knowledge and experience in aircraft aeroleasticity & structural dynamics modeling (10 years) 2. Advanced knowledge and experience with MSC Nastran and Patran (10 years) 3. Knowledge and experience with Matlab and/or Python for analytical and post test data processing (5 years) 4. Good general knowledge of 14 CFR, EASA & TCCA Part 25 requirements and certification (5 years) As an Engineering Contractor in Flutter & Dynamic Loads, you will: • Provide flutter solutions for aircraft nominal, parametric, failure and repair scenarios. • Assess aircraft flutter margins and harmonize all levels of company and regulatory requirements to guarantee a safe aircraft aeroelastic design. • Generate and analyze aircraft structural dynamic responses and corresponding load distributions for Tuned and PSD gust conditions. • Generate and analyze aircraft structural dynamic responses and corresponding load distributions for engine fan blade out & windmilling conditions. • Document completed analysis and findings in Engineering Reports for aircraft Certification. • Support as required all relevant L&D customer interfaces within Engineering, Test and Certification including Flight Dynamics, Structures, Mass Properties, Flight Control Systems, Flight Test & CAO groups. What you'll bring to the team: • Extensive knowledge of aircraft aeroelasticity principles and concepts • Good general knowledge of 14 CFR, EASA & TCCA Part 25 requirements and certification • Advanced knowledge and experience in aircraft aeroleasticity & structural dynamics modeling • Advanced knowledge and experience with engine fan blade out and windmilling dynamic analysis • Experience with preparation for and execution of aircraft ground vibration tests • Experience with preparation for and execution of aircraft flight flutter testing • Experience with aeroservoelasticity is a plus • Advanced knowledge and experience with MSC Nastran and Patran • Knowledge and experience with Matlab and/or Python for analytical and post test data processing • Knowledge and experience with one or more commercial or NASA CFD analysis toolsets • Knowledge and experience with Unix and/or Linux • Strong verbal and written communication skills, with prior experience in a project leadership role. • An ability to clearly and concisely convey technical concepts to all technical and/or management levels • Collaborate with internal & external customers on significant technical matters often requiring coordination between organizations • Advanced degree in Aerospace Engineering strongly preferred
 
Job Number: 20-155150
Job Location: GA
Per Diem: $77
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fuel System Engineer

Description:
Candidates should have experience with:
- Aircraft fuel systems and components including wing fuel tanks, delivery, refuel and fuel quantity measurement
- FAA Part 25/EASA CS-25 certification of fuel system components, including qualification and test plans, test witnessing, data analysis, and reporting
- Coordinating with fuel system suppliers to meet system and component design, test and certification requirements

Also desirable:
- Familiarity with Fuel Tank Ignition Prevention per Part 25.981
- General knowledge of aircraft turbine engine installations

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 12503
Job Location: Savannah, GA
Rate: $60.00 - $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6+ mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fuel Systems Engineer

Description:
Candidates should have experience with:
- Aircraft fuel systems and components including wing fuel tanks, delivery, refuel and fuel quantity measurement
- FAA Part 25/EASA CS-25 certification of fuel system components, including qualification and test plans, test witnessing, data analysis, and reporting
- Coordinating with fuel system suppliers to meet system and component design, test and certification requirements
Also desirable:
- Familiarity with Fuel Tank Ignition Prevention per Part 25.981
- General knowledge of aircraft turbine engine installations
All applicants must be U. S. Citizens or permanent residents of the U.S.
 
Job Number: 155121
Job Location: Savannah, GA
Rate: 60 - 65 hourly
Per Diem: yes
Overtime: yes
Duration: L-T
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: P O BOX 965280
2886 SANDY PLAINS RD

City, State: MARIETTA, GA 30066
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fuel Systems Engineer

Description:
- Aircraft fuel systems and components including wing fuel tanks, delivery, refuel and fuel quantity measurement
- FAA Part 25/EASA CS-25 certification of fuel system components, including qualification and test plans, test witnessing, data analysis, and reporting
- Coordinating with fuel system suppliers to meet system and component design, test and certification requirements
Also desirable:
- Familiarity with Fuel Tank Ignition Prevention per Part 25.981
- General knowledge of aircraft turbine engine installations
 
Job Number: 20-155121
Job Location: GA
Per Diem: Possible
Overtime: Possible
Start Date: Up to $65.00 per hour
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fuel Systems Engineer

Description:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Candidates should have experience with:
• Aircraft fuel systems and components including wing fuel tanks, delivery, refuel and fuel quantity measurement
• FAA Part 25/EASA CS-25 certification of fuel system components, including qualification and test plans, test witnessing, data analysis, and reporting
• Coordinating with fuel system suppliers to meet system and component design, test and certification reqts

Also desirable:
• Familiarity with Fuel Tank Ignition Prevention per Part 25.981
• General knowledge of aircraft turbine engine installations

Education and Experience Requirements:
• Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.

Essential Functions:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
 
Job Number: 24-435
Job Location: Savannah, GA
Rate: $60-$65/hr
Per Diem: Yes
Overtime: Yes
Duration: ASAP
Start Date: 1+ years
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Human Factors Certification Engineer

Description:
The Human Factors Certification Engineer will be the focal for concept development and validation, systems integration, and certification activities related to Human Factors aspects of the aircraft design. This role will serve as the internal Subject Matter Expert as well as the primary external point of contact with regulatory agencies, industry standards groups, and suppliers for Human Factors considerations. The most important traits are attitude towards the project, hard work ethic, and being able to self-manage and learn new skills. Forward thinking will be highly regarded as well. It is preferred that this individual be an FAA DER or candidate.

Responsibilities
This position will be responsible for:
• Working with multiple engineering and pilot teams to
• Establish design philosophies and strategies for Human Factors considerations, including Simplified Vehicle Operations
• Execute design development activities for Human Factors, including mock-ups, simulators, and user feedback studies
• Lead certification planning for Human Factors considerations
• Convey requirements in a way that clearly breaks down the product objectives, regulations, and guidance material into specific and verifiable requirements
• Review designs, develop solutions, and ensure compliance with company objectives and airworthiness standards
• Determining and interpreting the certification basis and establishing the compliance strategy – including means and methods of compliance
• Developing, reviewing, and approving certification-related documents, including
• Issue Papers, Special Conditions, Equivalent Levels of Safety, etc.
• Certification Plans and Summaries
• Test Plans and Reports
• Design and Analysis Reports
• Planning out test campaigns, overseeing test article fabrication, and witnessing tests in order demonstrate applicable design show compliance with airworthiness standards
• Interfacing with certification authorities as required (FAA, EASA, etc.)
• Mentoring junior engineers

Required Skills and Experience
This position requires candidate to have or be:
• An expert level understanding of design standards and verification methods for Human Factors aspects of airplanes and helicopters
• Previous experience with Human Factors aspects of aircraft development
• Previous FAA certification experience
• Working knowledge of 14 CFR Part 23 regulations and guidance material
• The ability to question assumptions in regulations, guidance material, and engineering specifications
• The ability to read, review, and create engineering specifications and drawings
• At least 10 years of relevant aviation or aerospace industry experience
• A Bachelor’s of Science in an applicable engineering discipline
• Proficient in English
• Proficient with Microsoft Office products

Desired Skills and Experience
The ideal candidate for this position will have or be:
• An FAA Designated Engineering Representative (DER)
• Whole-aircraft FAA certification program experience, Part 23 or Part 27 experience preferred
• A private pilot certificate, advanced ratings preferred
• Experience using a variety of avionics and flight control systems
• Experience in testing planning, execution, and reporting
• Experience and involvement with industry groups to develop consensus standards
• Familiar with Dassault Systems engineering and management tools





The Structures Company is an AA/EOE.
 
Job Number: 382
Job Location: Northern CA
Rate: OPEN - **DOE**
Duration: DIRECT POSITION
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Landing Gears Stress Analysis Engineer - Mechanical Systems

Description:
We have a need for a Stress Engineer with Landing Gears experience.
Mechanical Systems Stress Engineer (FEM, Composites, and Hypersizer are secondary).
Mechanical Systems - Control systems, any mechanical moving part
Strong hand calcs vs FEM. More metallics than composites.

Qualifications

• Bachelor’s degree from an accredited institution, with a concentration in a relevant Engineering discipline.
• Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures using Femap as a pre and post processor.
• Minimum 8 years as a Stress Engineer.
• Minimum 5 years of applicable experience in the analysis of Mechanical Systems Structural Components using strength of materials and finite element based methods with more emphasis on Hand Calcs methods using Excel.
• Minimum 3 years experience on Landing Gears Analysis.
• Experience with free-body diagrams and classical stress analysis techniques
• Excellent verbal and written communication skills
• Excellent organizational and problem-solving skills
• Excellent computer skills, including Outlook, Word, Excel and PowerPoint
• Applicants must be “U.S. persons” as defined by the ITAR
Preferred Skills and Experience
• Hands-on experience with composites part fabrication and assembly processes and proficiency in Hypersizer a plus
• Pilot, aircraft homebuilding and rapid prototyping experience a strong plus
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
• Experience with manufacturing-based ERP systems, such as Oracle, is a plus

The Structures Company LLC is an AA/EOE.
 
Job Location: Mojave, CA
Rate: $75-85/hr DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-Term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Loads Engineer

Description:
Required Skills:
1.Advanced knowledge and experience in aircraft aeroleasticity & structural dynamics modeling (10 years)
2.Advanced knowledge and experience with MSC Nastran and Patran (10 years)
3.Knowledge and experience with Matlab and/or Python for analytical and post test data processing (5 years)
4.Good general knowledge of 14 CFR, EASA & TCCA Part 25 requirements and certification (5 years)

As an Engineering Contractor in Flutter & Dynamic Loads, you will:
•Provide flutter solutions for aircraft nominal, parametric, failure and repair scenarios.
•Assess aircraft flutter margins and harmonize all levels of company and regulatory requirements to guarantee a safe aircraft aeroelastic design.
•Generate and analyze aircraft structural dynamic responses and corresponding load distributions for Tuned and PSD gust conditions.
•Generate and analyze aircraft structural dynamic responses and corresponding load distributions for engine fan blade out & windmilling conditions.
•Document completed analysis and findings in Engineering Reports for aircraft Certification.
•Support as required all relevant L&D customer interfaces within Engineering, Test and Certification including Flight Dynamics, Structures, Mass Properties, Flight Control Systems, Flight Test & CAO groups.

What you'll bring to the team:
•Extensive knowledge of aircraft aeroelasticity principles and concepts
•Good general knowledge of 14 CFR, EASA & TCCA Part 25 requirements and certification
•Advanced knowledge and experience in aircraft aeroleasticity & structural dynamics modeling
•Advanced knowledge and experience with engine fan blade out and windmilling dynamic analysis
•Experience with preparation for and execution of aircraft ground vibration tests
•Experience with preparation for and execution of aircraft flight flutter testing
•Experience with aeroservoelasticity is a plus
•Advanced knowledge and experience with MSC Nastran and Patran
•Knowledge and experience with Matlab and/or Python for analytical and post test data processing
•Knowledge and experience with one or more commercial or NASA CFD analysis toolsets
•Knowledge and experience with Unix and/or Linux
•Strong verbal and written communication skills, with prior experience in a project leadership role.
•An ability to clearly and concisely convey technical concepts to all technical and/or management levels
•Collaborate with internal & external customers on significant technical matters often requiring coordination between organizations
•Advanced degree in Aerospace Engineering strongly preferred

All applicants must be U. S. Citizens or permanent residents of the U.S.
 
Job Number: 155150
Job Location: Savannah, GA
Rate: 70-77 hourly
Per Diem: yes
Overtime: yes
Duration: L-T
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: P O BOX 965280
2886 SANDY PLAINS RD

City, State: MARIETTA, GA 30066
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Stress/Structures Engineer – Long term, direct hire

Description:
Andromeda Systems Incorporated (ASI) has opportunities for experienced aircraft MRB Stress/Structural Engineers. The Engineers will perform MRB repairs with substantiation and stress analysis to support US DoD projects. These positions are located in the Jacksonville, FL area.

Engineers at ASI work in a great environment which includes:
• Compressed and flexible work schedules
• Ability to work from home
• Diverse projects supporting multiple platforms
• Fantastic co-workers and customers
• Hands-on assignments that don’t happen behind a desk

Some of the advantages of working with ASI in Jacksonville include:
• Low cost of housing
• No state income tax
• Great area schools (St. John’s County)
• Miles of sunny beaches

To Apply:
Visit https://androsysinc.com/careers/ to complete an application. Or use the contact email to submit your resume.

Responsibilities:
• Provide liaison/MRB engineering assistance in support of DoD platforms
• Physically inspect aircraft nonconforming structure and provide repair guidance to artisans
• Create reports that demonstrate all relevant design requirements have been satisfied
• Develop repairs and prepare static strength/fatigue analysis of engineering repair dispositions for nonconforming aircraft structure
• Implement creativity and flexibility in daily activities by relying on experience and judgement to plan and accomplish goals
• Assist less experienced engineers through technical direction and oversight

Requirements:
• 5+ years of work experience as a liaison, MRB stress, or stress engineer
• Bachelor’s or master’s degree in Engineering
- Mechanical or Aerospace preferred
• Established knowledge of aircraft static strength analysis methods
• Experience with maintenance and repair practices used in the aerospace industry
• Effective communication skills
• Self-motivated and able to work independently

Preferred Qualifications:
• 10+ years of experience in MRB Stress
• Experience with NAVAIR engineering and reporting procedures

Work Authorization/Security Clearance:
• Must be a U.S. Citizen and qualify for Secret Clearance
 
Job Number: 557
Job Location: Orange Park, FL
Rate: DOE
Per Diem: No
Overtime: Available
Duration: Long Term
Start Date: Available Now
Input Date: 11/14/2020
Firm Name: ANDROMEDA SYSTEMS INC
Attention: Stephanie Danti
Address: 330 CROSSING BLVD
City, State: ORANGE PARK, FL 32073
Phone: 904/402-8673
Website: www.androsysinc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mass Properties Engineer

Description:
Provide mass properties engineering in accordance with industry standards and Society of Allied Weight Engineers (SAWE) best practices. Analyze mass properties impacts of internal and external modifications and impacts to systems and subsystems. Analyze and account for changes in mass properties throughout program lifecycle. Model and calculate mass properties data to support all phases of project development. Translate customer requirements into mass models for development of mission profiles. Analyze mission configurations using 2D drawings and 3D CAD. Generate mass properties distributions for modifications and integrate with customer data for input to structural loads models. Manage subcontractor efforts related to mass properties including vendor weight control. Lead weight reduction tasks. Articulate mass properties requirements, risks, opportunities, and status at formal design reviews to both internal and external customers. Generate FAA and DoD mass properties documentation meeting requirements of airworthiness certification including weight and balance manuals, supplements, and equipment lists. Perform weight and balance measurements of components and final products. Coordinate mass properties requirements with multi-disciplinary teams including maintenance, production, logistics support, flight test, flight operations and other disciplines.



EDUCATION, EXPERIENCE AND SKILLS REQUIRED:
Requires a BS in Related Field. 10+ Years Familiarity with SAWE and American Institute for Aeronautics and Astronautics (AIAA) Recommended Practices and Standards, Automated Weight and Balance System (AWBS) and FAA airworthiness regulations. Knowledge and experience in aircraft operations, familiarity with Microsoft Office, and 3D CAD/CAM tools (Catia V5 preferred) Familiarity with aerospace system design and integration, manufacture, and maintainability, including familiarity with best practices in mechanical, electrical, and systems design. Must be a problem solver capable of working alone or with a technical team in a fast paced environment. Note: Ability to obtain/maintain a security clearance may is required.



The Structures Company is an AA/EOE.
 
Job Number: 409
Job Location: Wichita, KS
Rate: ***DOE***
Per Diem: Yes
Overtime: No
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Materials & Process Engineer

Description:
We are currently seeking M&P Engineer individuals with a focus in evaluation/processing of composites and adhesive secondary bonding of composites. Also must have ground floor experience and creating methods from scratch.

Seeking a first rate aircraft materials and processes engineer with experience in composite materials, testing, out-of-autoclave processing, as well as bonded assemblies. The engineer in this role will be expected to fully understand and maintain the materials and processes used. The primary task of this role will be to design and carry-out mechanical testing to support structural analysis of both current and future vehicle builds. This will require consultation and buy-in from stakeholders in various departments so strong interpersonal skills are also necessary. The engineer in this role is expected to be knowledgeable of basic mechanical testing methods, and familiar with composite and paste adhesive properties. An additional task of this role will be to review/write manufacturing procedures and processes to ensure compliance with design specifications.

Duties:
• Develop and refine material and process requirements
• Author materials and processing specifications
• Author material/joint test plans and their associated reports
• Review test data and undertake post-testing activities including design allowable calculations, equivalency determinations, and failure mode analysis
• Review test plans, process specifications, and other documents to ensure compliance with design requirements
• Confer with stakeholders in Manufacturing, Engineering, and other departments to facilitate production of parts

Requirements:
• Bachelor’s degree from an ABET accredited institution, with a concentration in a relevant Materials Engineering / Mechanical Engineering / Structural Engineering discipline
• Conversant in composite materials and processes used in the manufacture of composite aircraft fuselage and structural components including out-of-autoclave processing and bonded assemblies
• Experience in authoring / revising materials and process specifications for composite materials
• Experience in authoring test plans and reports
• Knowledgable of materials testing and characterization methods
• Familiarity with industry-accepted statistical analysis methods of treating test data such as those found in CMH17-1
• A desire to work in a fast-paced work environment with a motivated team
• Excellent verbal and written communication skills
• Excellent organizational skills and problem-solving skills
• Strong team player
• Excellent computer skills, Microsoft Word, Excel and PowerPoint
• Experience in stress analysis methods, including the use of hand calcs and FEM is a plus


The Structures Company is an AA/EOE.
 
Job Number: 279
Job Location: Mojave, CA
Rate: **DOE**
Per Diem: Yes
Overtime: Possible
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
****Candidates must have an Active Secret Clearance or to have had one within the last two (2) years with the last investigation in the last five (5) years****

Job Description:
Prior demonstrated experience in aircraft landing gear design and one or more of the following technical areas:
- CATIA V5, Solidworks, Pro Engineer, Creo, Unigraphics, NX or equivalent 3-D Computer Aided Design (CAD) tool.
- Experience in mechanism design
- Experience with metallic and composite design
- Experience with GD&T (Geometric Dimensioning and Tolerancing)
- Experience with hand stress analysis
- Degree in an Engineering Discipline

Qualifications:
1. Level 4: BS+16 YRS or MS+14 YRS
2. Prior demonstrated experience in aircraft landing gear design is required.
 
Job Number: 12515
Job Location: Fort Worth, TX
Rate: $100.00 - $140.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 12 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Designer

Description:
Understanding and interpreting engineering models and drawings in aircraft subsystems such as Environmental Control Systems, Fuel Systems, Hydraulics Systems, and etc. Demonstrated ability to utilize 3D modeling software is a plus.

HOURS: 9/80 workweek.

Requirements: High School Diploma/GED required plus 6 years of relevant experience. Preferred Qualifications: Experience with NX and TeamCenter.

***Must be able to view classied material
 
Job Number: 185533
Job Location: Melbourne, FL
Rate: $40-42/hr
Per Diem: split
Overtime: not specified
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: CHIPTON ROSS
Attention: Terry Jones
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical/Sub-Systems Engineer – Long term, direct hire

Description:
Andromeda Systems Incorporated (ASI) is seeking full-time experienced mechanical systems engineers to support DoD aircraft platforms. The engineers will assist in the design, execution, and troubleshooting of mechanical systems and modifications on a variety of DoD aircraft platforms. These positions are located in the Jacksonville, FL area.

Engineers at ASI work in a great environment which includes:
• Compressed and flexible work schedules
• Ability to work from home
• Diverse projects supporting multiple platforms
• Fantastic co-workers and customers
• Hands-on assignments that don’t happen behind a desk

Some of the advantages of working with ASI in Jacksonville include:
• Low cost of housing
• No state income tax
• Great area schools (St. John’s County)
• Miles of sunny beaches

Responsibilities:
• Develop detailed solutions for technical, operational, and maintenance problems
• Assist maintenance in troubleshooting:
- the rigging of aircraft control systems
- aircraft hydraulic repairs and malfunctions
- aircraft fire detection and suppression system repairs and malfunctions
- aircraft fuel system repairs and malfunctions
- aircraft pressurization system repairs and malfunctions
• Present to management or team
• Ensure repairs are compliant with approved naval aviation maintenance policies
• Perform engineering investigations of failed aircraft components and systems
• Provide disposition for obsolete aircraft system components
• Determine criticality of aircraft system components by performing failure mode effects and criticality analysis
• Review technical publication deficiency reports and update publications where necessary
• Ensure aircraft operates properly and safely
• Draw and read blueprints and give material estimates and time required for repairs
• Determine airworthiness of aircraft
• Apply engineering principles to investigate, analyze, plan, develop, implement, test, and evaluate projects within the mechanical engineering discipline
• Review and prepare engineering and technical analyses, reports, and other technical documentation
• Up to 10% travel may be required

Required Qualifications:
• Bachelor’s degree in Aerospace, Aerodynamics, Mechanical or Electrical Engineering from an accredited college or university
• At least 3 years of mechanical systems engineering work experience within the aviation, aerospace, or defense industry
• Familiarity with the troubleshooting and integration of test equipment, electrical/power, air conditioning, cabin pressure, hydraulics, and mechanical systems in aircraft
• Experience in reading, creating, and editing drawings in AutoCAD (or similar CAD program) and work instructions in Microsoft Office and Adobe Acrobat products
• Experience in prototyping and validating installations
• Ability to use Microsoft Office Suite (Excel, Word, Outlook, PowerPoint)
• Effective communication and interpersonal skills

Preferred Qualifications:
• 5-10 years of mechanical systems engineering work experience within the aviation, aerospace, or defense industry
• Self-motivator capable of working through problems on own

Work Authorization/Security Clearance:
• Must be a U.S. Citizen and qualify for Secret Clearance
 
Job Number: 513
Job Location: Orange Park, FL
Rate: DOE
Per Diem: No
Overtime: Available
Duration: Long Term
Start Date: Available Now
Input Date: 11/14/2020
Firm Name: ANDROMEDA SYSTEMS INC
Attention: Stephanie Danti
Address: 330 CROSSING BLVD
City, State: ORANGE PARK, FL 32073
Phone: 904/402-8673
Website: www.androsysinc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
6 Non-Destructive Test (NDT/NDI) Level II Needed

Description:
Seeking aviation/aircraft non-destructive test (NDT/NDI) Level 2
MUST BE US PERSONS
MUST have successfully completed minimum training requirements defined in NAS 410, ATA 105, or ASNT-SNT-TC-1A for a Level 2 inspector in UT and PT.

• Responsible for accomplishing assigned inspection work on space flight system hardware, assemblies and vehicles.
• Conducts inspections utilizing a variety of NDT methods which may include but are not limited to ultrasonic, penetrant, x-ray, eddy-current, and thermal/infrared and laser shearography.
• Properly utilize NDT test equipment and associated tools to successfully interrogate hardware and structures, make decisions as to their acceptability for continued use and keep abreast of new and advanced test equipment.
• Operate manual and automated NDT equipment.
• Shall be required to document inspection results in both paper and electronic forms as well as complete and sign work records in connection with work performed.
• Inspects parts, sub-assemblies and completed assemblies to the extent necessary to determine, accomplish and approve acceptability in accordance with written procedures.
• Will be required to, but not limited to be working on check aircraft.
• Assist with development of procedures and techniques for non-destructive testing of metallic and composite structures.
• Support training of other NDT personnel using hands-on knowledge from the vehicles via different mediums as appropriate.
• Excellent attendance, ability to work overtime, and other shifts as required.

REQUIREMENTS
• Must have successfully completed minimum training requirements defined in NAS 410, ATA 105, or ASNT-SNT-TC-1A for a Level 2 inspector in UT and PT. Training in other NDT methods is desirable.
• Must have recent, documented hours, working as a NDT inspector and have obtained sufficient experience to be certified in accordance with NAS 410, ATA 105, or ASNT-SNT-TC-1A.
• Must have strong working knowledge of composite aircraft and/or aerospace non-destructive testing processes in composite material.
• Ability to conduct inspections with limited supervision.
• Minimum 5 years aviation/aerospace industry experience desired.
• Excellent computer skills. Skilled in working in Microsoft Office applications.
• Experience on narrow body and/or business jet aircraft preferred.
• Experience with composite aircraft is preferred although not required (commercial or military aerospace application).
• Must display maturity of action and judgment.
• Must be able to work under pressure and thrive in a fast-paced environment.
• Good communication skills.
• Ability to read, interpret, and communicate blueprints, specs, and other technical documents.

Physical and/or Additional Requirements
• Perform physical requirements of the position, including use of inspection hand tools, NDT equipment, lift up to 50 lbs., pass eye examination.
• Willing to work overtime, all shifts, travel and be on-call as necessary.

The Structures Company LLC is an AA/EOE.
 
Job Number: 504
Job Location: Mojave, CA
Rate: **DOE**
Per Diem: Yes
Overtime: Possible
Duration: 8+ Months
Start Date: ASAP
Input Date: 09/29/2021
Last Updated: 02/24/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
PCB Design Engineer

Description:
In this position the engineer will design and develop complex electronic hardware systems for aircraft. A major focus of this mission critical engineering role will involve developing aircraft electronic systems. The engineer will be responsible for Circuit design, Field Programable Gate Array (FPGA) programing, and Printed Circuit Board (PCB) and Circuit Card Assembly (CCA) designs working on a cross functional team. Working on a cross functional team the engineer will be working with mechanical and software design teams to develop a complete qualified flight tested aircraft solutions.

The engineer will have an opportunity have an impact on the following areas: Requirements analysis/derivation, concept development, hardware architecture, component selection, schematic capture, reliability analysis (derating, thermal, signal integrity, power integrity, stability, overstress), design verification, system integration, and qualification.

REQUIRED EXPERIENCE:
- Experience with circuit design concepts
- Experience in circuit analysis, troubleshooting, test instrumentation, and data analysis tools
- Experience with Printed Circuit Board (PCB) board design and Circuit Card Assembly (CCA) design
- Experience with VHDL, Verilog, or System Verilog languages to support FPGA firmware programing
- The technical ability to effectively define and interpret system level requirements and derive the requirements necessary to interface between lab and hardware
- The ability to work well in a teaming environment with other disciplines (Systems Engineering, Software Engineering, Mechanical Engineering, etc.)

DESRIED EXPERIENCE:
- Experienced using Xilinx and/or Microsemi FPGAs
- Experienced with design and simulation tools (Xilinx Vivado, Microsemi Libero, Mentor QuestaSim)
- Experience with Perl, Visual Basic, and C/C++,
- DO 178C/254 verification
- High Speed and RF design
- Cadence schematic capture, PCB layout Allegro

EDUCATION:
Accredited BS Degree in Electrical Engineering or closely related technical field or equivalent experience/combined education

WORK HOURS:
4/10
Full-Time
 
Job Number: 186149
Job Location: Fort Worth, TX
Rate: $68.16/hr
Per Diem: split
Overtime: not specified
Duration: 12/+ mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: CHIPTON ROSS
Attention: Terry Jones
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Reliability Engineer

Description:
A Design and Reliability Engineer job is currently available in Shelton, CT through Belcan at one of our key aerospace customers. In this contract role, you will support projects ensuring that designs are sufficiently robust to satisfy customer needs; ensuring equipment is life cycle cost-effective without sacrificing operator, maintainer, or system safety.To be considered you will have a BA/BS and three plus years of experience with fault tree analysis.

Design and Reliability Engineer Job duties:
* Supports and manage projects ensuring that designs are sufficiently robust to satisfy customers needs for equipment.
* Manage cost effectiveness without sacrificing system safety.
* Responsible for supporting the US Army Future Long-Range Assault Aircraft (FLRAA) Program
* Perform reliability modeling, analyses and FMECA and incorporate relevant information into fault trees.

Schedule
* 1st Shift: 9/80A

Qualifications:
* BA/BS and at least three years of working experience analyzing aviation/aerospace systems.
* Must be a fluent user of PTC Windchill WQS Fault Tree (Formerly known as Relex).
* Must be able to interface with designers, ascertain and formulate fault tree logic, create fault trees, and verify the logic and results with the design community.
* Some experience using 3DX to view and interpret drawings.
* Familiarity using Isograph Reliability Workbench FaultTree+ is desired

If you are interested in this Design and Reliability Engineer job in Shelton, CT, please apply via the 'apply now' link provided.

Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.
 
Job Number: 300980
Job Location: Shelton, CT
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Firm Name: BELCAN TECHSERVICES
Attention: KevinGesner
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Electrical Parts, Materials and Process Engineer, Arlington, TX

Description:
Senior Electrical Parts, Materials and Process Engineer

Arlington, TX

• Cyient takes pride in partnering with the world’s leading Aerospace & Defense companies to deliver value-driven and outcome-based engineering solutions. We undertake design and system-level ownership of complex components, sub-systems, and modules to allow our clients to sustain a competitive advantage.
We collaborate with clients to support and deliver a wide range of end-to-end product and process engineering solutions across the Aerospace & Defense product segments - engines, avionics, structures, systems, interiors, aftermarket, digital, and defense.

Job Description

Position Overview:

Cyient Aerospace & Defense division is seeking an Experienced Senior Electrical Parts, Materials and Process Engineer to provide support to a major defense program in US.
Position Responsibilities:
Engineer shall provide electrical parts, materials and process engineer services, which will include but not be limited to:
o Support Query Note/Squawk dispositions (bundle fabrication supplier queries)
o Develop new assembly processes for connectors, backshells, cables, shielding/overbraid, and any other associated wire harness components.
o Provide configuration control for wire harness process documents by providing updates and releases
o Process new connectors/backshells/cables for use on Aircraft by:
o Developing substantiation (analysis/test),
o Interfacing with and obtain concurrence from EWIS UMs/ARs/DERs,
o Overseeing/coordinating test programs as required.
o Support Integrated Product Team design requests (what parts/processes to use in a given application)
Supplier personnel require wire harness PM&P engineering experience and experience in electrical design for Boeing aircraft is preferred
This position requires U.S. Citizenship.
Basic Qualifications (Required Skills and Experience):
o 3 or more years' experience working with Cables Wire Harness PMP
o Experience developing new assembly processes for connectors, backshells, cables, shielding/overbraid
Preferred Qualifications (Desired Skills and Experience):
o Degree in Electrical Engineering.
o Experience with Boeing Commercial / Defense airplane programs systems.
o Relevant and recent work experience in Electrical PMP
o Experience with wire harness components and specifications.
Skills & Experience
Electrical Wire Harness
Cyient is an Equal Opportunity Employer.

Cyient recruits, employs, trains, compensates, and promotes regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender, gender identity or expression, veteran status, and other protected status as required by applicable law. We are proud to be a diverse and inclusive company where our people can focus their whole self on solving problems that matter.

https://cyient.wd3.myworkdayjobs.com/en-US/careers/job/Arlington-Texas/Senior-Electrical-Parts--Materials-and-Process-Engineer_JR-017952
 
Job Number: JR-017952
Job Location: Arlington, TX
Input Date: 11/14/2020
Firm Name: CYIENT
Attention: Elizabeth Stoddard
Address: 1401 NOLAN RYAN EXPY
City, State: ARLINGTON, TX 76011
Website: www.cyient.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior GNC Engineer

Description:
Senior Guidance, Navigation and Control Engineer job in Louisville, Colorado is available with one of Belcan's top aerospace clients. In this job you will use your skills and expertise to design and test algorithms, flight software, related hardware, design tools, simulations, and more for various aerospace vehicles. These cover a very wide range from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. You'll explore complex GN&C algorithms and systems to assess performance of vehicle flight qualities and capabilities. Your technical duties involve the design, development, evaluation, and test of new products and processes throughout the product lifecycle.

Responsibilities:
* Design and test algorithms, flight software, related hardware, design tools, simulations, and more for various aerospace vehicles.
* Cover a very wide range from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems.
* Explore complex GN&C algorithms and systems to assess performance of vehicle flight qualities and capabilities.
* Design, development, evaluation, and test of new products and processes throughout the product lifecycle.


Requirements
* Bachelors of Science degree in Aerospace Engineering or other related discipline
* 10+ years of experience
* Thorough understanding of engineering principles and practices
* Fundamental understanding of the principles of strap down navigation, navigation Kalman filter design and absolute/relative navigation system designs and considerations
* Practical hands on experience with flight sensors and associated sensor test and modeling
* Experience developing, testing and certifying navigation algorithms and flight software
* Fluency with MATLAB/Simulink
* Experience defining navigation sensor performance and location requirements including sensor selection
* Experience developing tools to configure and assess performance of navigation sensors and navigation algorithms
* Experience with our Dream Chaser specific vehicle sensor suite
* Experience with ISS relative navigation system designs, considerations and limitations
* Fluency with Linux environments, C++ and Python programming languages
* Knowledge of industry standard system engineering design principles, to include, classical and Model Based System Engineering (MBSE)
* Knowledge of industry standard aerospace principles, to include, but not limited to parametric design and model-based definition
* Experience with flight test and hardware software integration
* Background in the Aerospace and Defense Industry
* The ability to obtain and maintain a Security Clearance

If you are interested in this GNC Engineering job in Lousiville, Colorado please apply via the 'apply now' link provided. Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

 
Job Number: 302781
Job Location: Louisville, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Firm Name: BELCAN TECHSERVICES
Attention: BrianVidetic
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Principal Engineer ( Clearfield, Utah ) S9778040

Description:
Senior Principal Engineer ( Clearfield, Utah ) S9778040
12 Month Contract

Pay Rate: Open

Sr. Principal Composites Analysis and Test Engineer Materials to join our team in our Clearfield, UT offices.

**MUST HAVE AN ACTIVE SECURITY CLEARANCE TO BE CONSIDERED FOR THIS ROLE with last investigation within the last 4.5 years.

Role description & Responsibilities:
Highly motivated analysis engineer with composite structures experience for military and/or commercial aircraft.
Responsibilities include but are not limited to static and dynamic analysis of composite structures, bonded and bolted assemblies

The candidate also have experience with composite material mechanical characterization and dynamic testing (modal, forced vibe acoustic etc.) of coupon and sub-elements.

Ability to define and lead characterization and test activities, including: authoring test plans and test reports, data reduction and calculation of material allowables.

Experience Preferred:
• Previous experience in aerospace manufacturing facility
• Proficiency with NX, Catia V5, Fibersim, Altair Hyperworks/Optistruct, and Hypersizer are also desirable
• Definition of layups and ply patterns with Fibersim to generate finite element models
• Requirements definition and verification
• Constitutive Model Development and implementation
 
Job Number: S9778040
Job Location: Clearfield, UT
Rate: Open
Per Diem: No
Overtime: yes
Duration: 12 Month
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Simulation & Software Engineers (Req #155052)

Description:
STS Technical Services is hiring Simulation & Software Engineers in Savannah, Georgia.

Position Summary:

Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of our client's products and services.

Job Duties:
Contributes to planning, developing and coordinating of important engineering projects
Provides specialized technical assistance to team members
Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
Determines and develops own approach to solutions within schedule and cost objectives
Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives 
Acts as liaison with representatives outside of the assigned group/area
Actively works to improve daily processes and ensures all work meets customer requirements
Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
Perform other duties as assigned.
Qualifications:
Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
Five (5) ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
Advanced degree in engineering related field preferred
The level of technical skill and abilities appropriate for this grade will be established by each discipline
Unique Skills:
Proficient with the utilization of Simulink in a real time simulation environment
Experience with Python for the purposes of creating scripts/tools for automation of tests conducted on a real time simulation platform
Aircraft system simulation experience
Integration of aircraft system Simulink models to corresponding real aircraft controller hardware
Experience interacting/updating/troubleshooting real time simulation platforms (eg ADI, NI, Speedgoat)
Rectifying lab problem reports issues through troubleshooting, solution development and implementation
Responsible for satisfying lab customer questions and/or test assistance
Ability to read aircraft/simulation electrical drawings
Experience integrating various hardware I/O (analog, discrete, data bus, etc) into a real time simulation platform
Understanding standard aircraft industry I/O protocols (ARINC 429, 664, 485, 717, etc)
Troubleshooting lab simulation hardware/software and connected auxiliary test equipment
About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 35251
Job Location: Savannah, GA
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: Kristi Florentine
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Systems Engineer

Description:
A Sr. Systems Engineer job in Centennial, CO is currently available through Belcan. In this role, you will be responsible for developing complex system architectures within contextual modeling platforms, ushering them from operational concept through preliminary and detailed design, simulation, and test using progressive tools. To be considered for this role, Bachelor's of Science degree in System Engineering or related discipline and 10 or more years of relevant experience in the Aerospace and Defense Industry. This position requires the ability to obtain and maintain a Secret U.S. Security Clearance. U.S. Citizenship status is required as this position needs an active U.S. Security Clearance for employment

Sr. Systems Engineer Job duties:

* Use your skills and expertise to research, architect, model, simulate, test, certify and improve cutting edge products and services
* Develop complex system architectures within contextual modeling platforms
* Usher architectures from operational concept through preliminary and detailed design, simulation, and test using progressive tools
* In charge of system-level ownership of new products and processes through the product lifecycle

Qualifications:

* Experience with flight deck avionics systems for Part 23/25 or Part 27/29 aircraft
* Thorough understanding of requirements development, system design, integration, and Verification and Validation (V&V) principles
* Advanced Experience with requirements management and system modelling tools, such as DOORS, Rhapsody, NoMagic, MATLAB
* Experience or certification in INCOSE standards
* Knowledge of industry standard mechanical design principles, to include, but not limited to requirements management, Model Based System Engineering (MBSE)

If you are interested in this Sr. Systems Engineer job in Centennial, CO, please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.


 
Job Number: 302971
Job Location: Centennial, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Firm Name: BELCAN TECHSERVICES
Attention: DerrickHart
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Analysis Engineer

Description:
Seeking a first-rate aerospace Composite Stress Analysis Engineer with experience in vehicle stress analysis, repairs, and production manufacturing. The composite stress analyst will compile analysis, reports, models, and margins of safety into standardized formats for upload into TSC’s product lifecycle manager. Additionally, the analyst will support the design engineering staff with drawing release. The stress analyst is ultimately responsible for ensuring the vehicle structural design meets the customer mission requirements with positive margins of safety.

Your Mission

Responsibilities:
• Reviews, updates, and compiles engineering analytical definition of structural components and assemblies based on records from the prototype build project
• Develops standardized analysis criteria and templates
• Plays an integral role in the work flow release process for all structural designs
• Supports review of manufacturing plans and procedures to ensure compliance with design and loads requirements
• Supports the creation of structural test plans which will be used to verify manufacturing
• Oversees and coordinates other Stress Engineer work and act as a Commodity Stress Focal.
• Handles Pre-and-Post flight structural NRIs for Fuselage Structure, reviews other team members work on NRIs assigned to them.
• Handles Inspection inquiries, requiests, and new inspection from VGMX team.
• Defines primary structures inspections as needed for flight test and EIS.
• Compiling and implementing tools, methods and procedures learned and implement with team.

What You Bring
Basic Qualifications

• Bachelor’s degree from an accredited institution, with a concentration in a relevant Engineering discipline
• Minimum 10 years of applicable experience in the analysis of structural systems using strength of materials and finite element based methods.
• Minimum 5 years experience with strong understanding of composites analysis, manufacturing and sizing of composite structures.
• Minimum 5 years experience with strong understanding of FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures.
• Minimum 3 years supporting Structural Tests with knowledge and practical experience on FEM/Strain gage data correlation.
• Experience with free-body diagrams and classical stress analysis techniques.
• Excellent verbal and written communication skills
• Excellent organizational and problem-solving skills
• Excellent computer skills, including Outlook, Word, Excel and PowerPoint
• Applicants must be “U.S. persons” as defined by the ITAR (22 CFR §120.15)

Preferred Skills and Experience
• Hands-on experience with composites part fabrication and assembly processes.
• Proficiency in FEMAP a plus
• Pilot, aircraft homebuilding and rapid prototyping experience a strong plus
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
• Experience with manufacturing-based ERP systems, such as Oracle, is a plus

Physical and/or Additional Requirements

• None


The Structures Company is an AA/EOE.
 
Job Number: 499
Job Location: Mojave, CA
Rate: $75-$85/Hr. ***DOE***
Per Diem: Yes
Overtime: Yes
Duration: 8+ Months
Start Date: ASAP
Input Date: 09/17/2021
Last Updated: 09/28/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Analysis Engineers Needed

Description:
• We are seeking a Structural Analysis Engineer with a Bachelor's degree in Structural, Stress, or a related Engineering field and at least 6 years of relevant experience. In this challenging, fast-paced environment, you'll have the opportunity to apply your knowledge and experience to design and create the most groundbreaking aerospace and defense technologies - those that exist today and those that will shape tomorrow.

What to look forward to:

As a Structural Engineer, you will be using your skills and expertise to analyze, research, and develop our complex structural engineering specifications involving structures, mechanical, hydraulic, electrical and electronics, power plant, armament, heating and ventilating, equipment, and maintenance designs. You'll be responsible for analyzing damage tolerance, durability, producibility, cost, dynamics, loads, stability and stress fatigue, thermal analysis, and safety. You'll recommend design approaches to meet our production requirements for new or improved products or processes.

Must-haves:
• Bachelor's degree in Structural, Stress, or related Engineering discipline and at least 6 years of relevant experience
• Prior experience in project definition, simulation, implementation, lab integration, and test
• Strong classical analysis techniques.

Preferred:
• Experience with Femap/Nastran
• Aviation integration experience, system integration tied to aircraft
• Airbus experience.
• Aircraft configuration management
• Experience with airworthiness requirements including Mil-hdbk-516 and FAR 25 requirements
• Aircraft subsystem design background
• Architectural development experience and configuration design skills


The Structures Company is an AA/EOE.
 
Job Number: 405
Job Location: Wichita, KS
Rate: ***DOE***
Per Diem: Yes
Overtime: No
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Analyst - Service Engineer

Description:
Requirements:
1) A fundamental understanding of static stress analysis as it relates to sizing airframe structural repairs 2) Experience as a stress analyst in post-production environment or a production MRB stress engineer 3) Experience with airworthiness regulations in regards to major repairs or alterations of external airframe parts and components and the requirements to find compliance when analyzing a repair
4) The ability to effectively work with & support a multidiscipline team of engineers, mechanics, Tech Ops, Quality Control, upper management, etc.
5) Strong written and verbal communication and collaborative skills and the ability to effectively communicate the organization's position with external and internal customers
6) Practical hands on aircraft experience and problem solving
The following unique skills are preferred:
1) Gulfstream engineering experience, e.g. G650, G500, G600.
2) Experience in fatigue analysis and damage tolerance analysis.
3) Experience in the repair and analysis of composite structure
4) Experience in repair and analysis of aircraft landing gear.
5) Experience in development of Structural Repair Manual (SRM) data.
6) Experience with foreign airworthiness regulatory agencies
7) Preferable if candidate is an FAA certified Structures DER (Designated Engineering Representative) or a Gulfstream ODA certified Structures AR (Airworthiness Representative).
All applicants must be U. S. Citizens or permanent residents of the U.S.
 
Job Number: 155102
Job Location: Savannah, GA
Rate: 72-79 hourly
Per Diem: yes
Overtime: yes
Duration: L-T
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: P O BOX 965280
2886 SANDY PLAINS RD

City, State: MARIETTA, GA 30066
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineer

Description:
The follow Skills are Required: 1) A fundamental understanding of static stress analysis as it relates to sizing airframe structural repairs 2) Experience as a stress analyst in post-production environment or a production MRB stress engineer 3) Experience with airworthiness regulations in regards to major repairs or alterations of external airframe parts and components and the requirements to find compliance when analyzing a repair 4) The ability to effectively work with & support a multidiscipline team of engineers, mechanics, Tech Ops, Quality Control, upper management, etc. 5) Strong written and verbal communication and collaborative skills and the ability to effectively communicate the organization's position with external and internal customers 6) Practical hands on aircraft experience and problem solving The following unique skills are preferred: 1) Gulfstream engineering experience 2) Experience in fatigue analysis and damage tolerance analysis. 3) Experience in the repair and analysis of composite structure 4) Experience in repair and analysis of aircraft landing gear. 5) Experience in development of Structural Repair Manual (SRM) data. 6) Experience with foreign airworthiness regulatory agencies 7) Preferable if candidate is an FAA certified Structures DER (Designated Engineering Representative) or a ODA certified Structures AR (Airworthiness Representative).
 
Job Number: 20-155102
Job Location: GA
Rate: Up to $79.00 per hour
Overtime: Possible
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineer – Long term, direct hire

Description:
Andromeda Systems Incorporated (ASI) has opportunities for experienced aircraft structural engineers capable of detailed stress analysis to support US DoD projects. Some of these positions are located in the Jacksonville, FL area. Other positions are open to remote workers within the continental US.

Engineers at ASI work in a great environment which includes:
• Compressed and flexible work schedules
• Ability to work from home
• Diverse projects supporting multiple platforms
• Fantastic co-workers and customers
• Hands-on assignments that don’t happen behind a desk

Some of the advantages of working with ASI in Jacksonville include:
• Low cost of housing
• No state income tax
• Great area schools (St. John’s County)
• Miles of sunny beaches

To Apply:
Visit https://androsysinc.com/careers/ to complete an application. Or use the contact email to submit your resume.

Responsibilities:
• Review/perform analyses with hand calculations using OEM & DoD stress methods and industry standards
• Initiate complex repairs and prepare static strength/fatigue analysis of engineering repair dispositions for nonconforming aircraft structure
• Manage project components including establishing task priorities, scheduling and tracking work assignments, providing guidance, and ensuring the availability of resources
• Implement creativity and flexibility in daily activities by relying on experience and judgement to plan and accomplish goals
• Use Finite Element Software pre and post processors such as Nastran/Patran and Femap
• Develop reports that demonstrate designs satisfy all relevant design requirements
• Provide oversight and technical direction to less experienced engineers

Required Qualifications:
• 5+ years of work experience in airframe analysis
• Bachelor’s or master’s Degree in Engineering
o Mechanical or Aerospace preferred
• Ability to work independently and self-motivate
• Usable knowledge of aircraft static strength analysis methods, finite element analysis, and strain life fatigue methods
• Knowledge of maintenance and repair practices used in the aerospace industry
• Strong communication and interpersonal skills

Preferred Qualifications:
• 10+ years of experience in Stress
• Experience with NAVAIR or Air Force engineering and reporting procedures
• Familiarity with Femap, Patran/Nastran, or similar FEA software

Work Authorization/Security Clearance:
• Must be a U.S. Citizen and qualify for Secret Clearance
 
Job Number: 601
Job Location: Orange Park, FL
Rate: DOE
Per Diem: No
Overtime: Available
Duration: Long Term
Start Date: Available Now
Input Date: 11/14/2020
Firm Name: ANDROMEDA SYSTEMS INC
Attention: Stephanie Danti
Address: 330 CROSSING BLVD
City, State: ORANGE PARK, FL 32073
Phone: 904/402-8673
Website: www.androsysinc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer ( Clearfield, Utah ) S9271202

Description:
Structural Analysis Engineer ( Clearfield, Utah ) S9271202
12 Month Contract

Pay Rate: $70-80 /hr W2, maybe more for the right candidate

**MUST HAVE AN ACTIVE SECRET CLEARANCE

Currently seeking a Principal Composite Structure Analysis Engineer to join our team in our Clearfield, UT offices.
Candidate must have had their last investigation within the last 4 1/2 years. Role description & Responsibilities: Highly motivated analysis engineer with composite structures experience for military and/or commercial aircraft. Responsibilities include but are not limited to static and dynamic analysis of composite structures, bonded and bolted assemblies The candidate also have experience with composite material mechanical characterization and dynamic testing (modal, forced vibe acoustic etc.) of coupon and subelements. Ability to define and lead characterization and test activities, including: authoring test plans and test reports, data reduction and calculation of material allowables.

Experience Requirements:
**MUST HAVE AN ACTIVE SECURITY CLEARANCE TO BE CONSIDERED FOR THIS ROLE (Candidate must have had their last investigation within the last 4 1/2 years.)

** BS in Civil, Mechanical, or Aerospace Engineering or related with a minimum of 8 years related experience in analysis engineering function.
Minimum of 8 years of experience with Nastran or ABAQUS Static, dynamic and thermostructural analysis experience Test lab experience, including instrumentation and data reduction Knowledge of composite materials and manufacturing processes Excellent oral and written communication skills Ability to work in a fast paced dynamic environment as part of a multi-discipline team

Experience Preferred:
Previous experience in aerospace manufacturing facility Proficiency with NX, Catia V5, Fibersim, Altair Hyperworks/Optistruct, and Hypersizer are also desirable • Definition of layups and ply patterns with Fibersim to generate finite element models, Requirements definition and verification Constitutive Model Development and implementation

Skills & Qualifications: Strong interpersonal skills with the ability to work with a team Excellent communication skills. Ability to make sound decisions Ability to multi-task Ability to prioritize and manage time effectively Education/Certifications: BS degree in Civil, Mechanical, Aerospace Engineering, or related
 
Job Number: S9271202
Job Location: Clearfield, UT
Rate: Open
Per Diem: no
Overtime: yes
Duration: 12 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer

Description:
Requirements:
1. Fundamental understanding of airframe structural design
2. Experience and ability with computer aided design tools such as CCD, CATIA V4 & V5, AutoCAD, or similar
3. Experience in post-production environment or as a production MRB engineer
4. Ability to design an airframe structural repair drawing and calculate the basic static stress analysis in support of the drawing
5. Practical hands on aircraft experience and problem solving
6. Ability to effectively work with and support a multi-disciplined team of engineers, mechanics and technical personnel
7. Strong verbal and written communication skills to effectively communicate with external and internal customers.
8. Flexibility to move quickly from one assignment to the next and the ability to handle multiple issues simultaneously
Preferred skills:
1. Gulfstream design engineering experience. e.g. G650, G500, G600
2. Experience in the repair of metal bonded structure
3. A working knowledge of applicable FAA regulations and the understanding of obtaining compliance with such regulations within an in-service environment.
4. Experience in development of Structural Repair Manual (SRM) data.
5. Experience with foreign airworthiness regulatory agencies
6. Experience with repairs that impact Airworthiness Directives

All applicants must be U. S. Citizens or permanent residents of the U.S.
 
Job Number: 155101
Job Location: Savannah, GA
Rate: 65-68 hourly
Per Diem: yes
Overtime: yes
Duration: L-T
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: P O BOX 965280
2886 SANDY PLAINS RD

City, State: MARIETTA, GA 30066
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer

Description:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of aerospace products and services

Required skills
• Fundamental understanding of airframe structural design
• Experience and ability with computer aided design tools such as CCD, CATIA V4 & V5, AutoCAD, or similar
• Experience in post-production environment or as a production MRB engineer
• Ability to design an airframe structural repair drawing and calculate the basic static stress analysis in support of the drawing
• Practical hands on aircraft experience and problem solving
• Ability to effectively work with and support a multi-disciplined team of engineers, mechanics and technical personnel
• Strong verbal and written communication skills to effectively communicate with external and internal customers.
• Flexibility to move quickly from one assignment to the next and the ability to handle multiple issues simultaneously

Preferred skills
• Aircraft design engineering experience Part 23/25
• Experience in the repair of metal bonded structure
• A working knowledge of applicable FAA regulations and the understanding of obtaining compliance with such regulations within an in-service environment.
• Experience in development of Structural Repair Manual (SRM) data.
• Experience with foreign airworthiness regulatory agencies
• Experience with repairs that impact Airworthiness Directives

Education and Experience Requirements
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
• 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Essential Functions
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
 
Job Number: 24-798
Job Location: Savannah, GA
Rate: $75-$77/hr
Per Diem: Yes
Overtime: Possible
Duration: 6 months
Start Date: ASAP
Input Date: 01/27/2023
Last Updated: 02/20/2023
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer - MRB

Description:
1.Fundamental understanding of airframe structural design 2. Experience and ability with computer aided design tools such as CCD, CATIA V4 & V5, AutoCAD, or similar 3. Experience in post-production environment or as a production MRB engineer 4. Ability to design an airframe structural repair drawing and calculate the basic static stress analysis in support of the drawing 5. Practical hands on aircraft experience and problem solving 6. Ability to effectively work with and support a multi-disciplined team of engineers, mechanics and technical personnel 7. Strong verbal and written communication skills to effectively communicate with external and internal customers. 8. Flexibility to move quickly from one assignment to the next and the ability to handle multiple issues simultaneously Preferred skills: 1. Gulfstream design engineering experience. e.g. G650, G500, G600 2. Experience in the repair of metal bonded structure 3. A working knowledge of applicable FAA regulations and the understanding of obtaining compliance with such regulations within an in-service environment. 4. Experience in development of Structural Repair Manual (SRM) data. 5. Experience with foreign airworthiness regulatory agencies 6. Experience with repairs that impact Airworthiness Directives
 
Job Number: 20-155101
Job Location: GA
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer Positions - Structural Modifications Experience Needed

Description:
POSITION SUMMARY : The structural design engineer performs detail design on commercial aircraft primary airframe for passenger to freighter modification. The engineer will be responsible for creating design data in support of structural modifications to aircraft primary structure for the modification of interior and external components. The engineer interfaces with internal and external partners and suppliers, procurement, and manufacturing in performing these functions.
ESSENTIAL JOB FUNCTIONS : Detail design of aircraft primary or secondary structures for passenger to freighter modification. Designs structural modifications and structural provisions. Designs repairs for aircraft structure that are beyond the scope of repair documentation. Supports the integration of structural and systems installation components within the aircraft configuration. Create moderate to complex design of aircraft primary or secondary structures to meet customer criteria, quality standards, FAA requirements, budget and project schedules using Computer Aided Drafting/Design tools. Ensures designs meet customer criteria, quality standards and FAA requirements.
MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC: Bachelor Degree in Aerospace or Mechanical Engineering or the equivalent is preferred. 10 years of experience working in aircraft design and extensive experience with aircraft modification projects.

REQUIRED SKILLS AND ABILITIES: Experience with Catia V5 required. Aviation background and aircraft modification experience required. Knowledge of mechanical design and documentation standards.



The Structures Company is an AA/EOE.
 
Job Number: 404
Job Location: Wichita, KS
Rate: **DOE**
Per Diem: Yes
Overtime: No
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer, Service Engineering

Description:
Required skills:
1. Fundamental understanding of airframe structural design.
2. Experience and ability with computer aided design tools such as CCD, CATIA V4 & V5, AutoCAD, or similar.
3. Experience in post-production environment or as a production MRB engineer.
4. Ability to design an airframe structural repair drawing and calculate the basic static stress analysis in support of the drawing.
5. Practical hands on aircraft experience and problem solving.
6. Ability to effectively work with and support a multi-disciplined team of engineers, mechanics and technical personnel.
7. Strong verbal and written communication skills to effectively communicate with external and internal customers.
8. Flexibility to move quickly from one assignment to the next and the ability to handle multiple issues simultaneously.

Preferred skills:
1. Gulfstream design engineering experience. e.g. G650, G500, G600.
2. Experience in the repair of metal bonded structure.
3. A working knowledge of applicable FAA regulations and the understanding of obtaining compliance with such regulations within an in-service environment.
4. Experience in development of Structural Repair Manual (SRM) data.
5. Experience with foreign airworthiness regulatory agencies.
6. Experience with repairs that impact Airworthiness Directives.

Education and Experience Requirements:
1. Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
2. 10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

Position Purpose:
1. Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Principle Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues.
2. Is consulted extensively by associates and others as a recognized authority within the field.
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities.
4. Approach to problem solving balances technical product, cost and schedule.
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results.
6. Exercises latitude in determining technical objectives of assignments and makes decisions and recommendations that are recognized as authoritative.

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
2. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 12497
Job Location: Savannah, GA
Rate: $65.00 - $68.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6+ mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Engineer

Description:
Job Description Summary
If you like solving problems and working with complex materials and systems, join our amazing team! As a Structural Engineer, you will be using your skills and expertise to design, evaluate, and certify our cutting edge products and services. These cover a very wide range from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. You'll examine complex metallic and composite structures and systems. Your technical duties involve the design and development of new products and processes throughout the product lifecycle.

Job Description

Must-haves:
 Bachelor's of Science degree in Mechanical Engineering, Aerospace Engineering, Civil Engineering or other related discipline and typically 6 or more years of relevant experience
 Understanding of engineering principles and practices
 Knowledge of Computer Aided Engineering tools
 Ability to work in multi-disciplinary design and development teams
 Experience to Static and/or Dynamic Analyses
 Experience in Engineering Simulation using Finite Element structural analysis (FEA) tools such as MSC Patran, Nastran, FEMAP, or ANSYS
 The ability to obtain and maintain a Secret U.S. Security Clearance is required
Preferred:
 Experience performing fatigue and damage tolerance analysis utilizing tools such as NASGRO or AFGROW
 Ability to perform classical analysis using industry standard hand calculation methods
 Knowledge of industry-standard mechanical design principles, to include, but not limited to parametric design, model-based definition, material hardware selection, manufacturing and production processes
 Ability to author substantiation reports
 Background in the Aerospace and Defense Industry
 
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Candace Pham
Address: 1600 AIRPORT FWY STE 400
City, State: BEDFORD, TX 76022-6871
Phone: 817/545-4009
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer III ECS/Bleed Air

Description:
Systems Engineer III ECS/Bleed Air job in Centennial, Colorado is available with one of Belcan's top aerospace clients. In this job you will use your skills and expertise to research, architect, model, simulate, test, certify and improve cutting edge products and services. You'll be developing complex system architectures within contextual modeling platforms, ushering them from operational concept through preliminary and detailed design, simulation, and test using progressive tools. As a cross-functional engineer, you are in charge of system-level ownership of new products and processes through the product lifecycle. To qualify for this job you will be a U.S. Citizen with the ability to obtain a DoD Secret security clearance; have an Bachelor degree, 6+ years of related experience.

Responsibilities:
* Research, architect, model, simulate, test, certify and improve cutting edge products and services. Develop complex system architectures within contextual modeling platforms, ushering them from operational concept through preliminary and detailed design, simulation, and test using progressive tools.
* System-level ownership of new products and processes through the product lifecycle.

Qualifications:
* US Citizen with the ability to obtain and maintain a secret Security Clearance. Learn more about the background check process for Security Clearances
* Bachelor's of Science degree in System Engineering or related discipline
* 6+ of System Engineering experience preferable in the aerospace industry
* Knowledge of requirements development, system design, integration, and Verification and Validation (V&V) principles
* Experience with aircraft engine bleed air systems
* Knowledge of aircraft Environmental Control Systems
* Experience with On-Board Oxygen Generation Systems
* Knowledge of On-Board Oxygen Generation System installation and qualification
* Experience with Aircrew Life Support Systems
* Knowledge of equipment related to aviation life support
* Experience with requirements management and system modelling tools, such as DOORS, Rhapsody, NoMagic, MATLAB
* Practical knowledge of industry standard mechanical design principles, to include, but not limited to requirements management, Model Based System Engineering (MBSE)
* Experience or certification in INCOSE standards
* Ability to administer baseline definition and maturation in a complex development setting, including the use of high impact trade studies and other measures

If you are interested in this Systems Engineer III job in Centennial, Colorado please apply via the 'apply now' link provided. Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

 
Job Number: 302779
Job Location: Centennial, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Firm Name: BELCAN TECHSERVICES
Attention: DavidDunham
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design Engineer

Description:
Responsible for the design, development and implementation of equipment, tools, dies, gauges, jigs, fixtures, industrial machinery, prototype model production and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements. Comprehensive understanding and wide application of engineering and technical principles, theories and concepts will be expected. Determines, provides and develops technical solutions to a wide range of difficult problems unique to each program assigned, with minimum direction or supervision.

REQUIRED EXPERIENCE:
- Minimum of 8-years of demonstrated professional Tool Design experience.
- MUST BE proficient in CATIA-V5 Generative Shape, Part, Assembly & Drafting workbenches.
- Proficient in the use of GD&T.
- Comprehensive knowledge and experience in aircraft tool design and fabrication, including composite lay-up and large assemblies.
- MS-Office proficient.

PREFERRED EXPERIENCE:
- CATIA-V4 or V6 experience.
- Experience in structural analysis.
- Experience working in a fast paced, developmental environment.

EDUCATION:
Accredited BS+9-15 YRS or MS+7-13 YRS

WORK HOURS:
5/40
Full-Time

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 186477
Job Location: Palmdale, CA
Rate: up to $95/hr DOE
Per Diem: split
Overtime: not specified
Duration: 12/+ mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: CHIPTON ROSS
Attention: Terry Jones
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design Engineer

Description:
****Candidates must have an Active Secret Clearance or to have had one within the last two (2) years with the most recent investigation completed within the last five (5) years.****
****Applicants must not have applied for Tool Design at LM- in the last 6-months.****

Job Description:
1. Responsible for the design, development and implementation of equipment, tools, dies, gauges, jigs, fixtures, industrial machinery, prototype model production and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements.
2. Comprehensive understanding and wide application of engineering and technical principles, theories and concepts will be expected.
3. Determines, provides and develops technical solutions to a wide range of difficult problems unique to each program assigned, with minimum direction or supervision.

Basic Qualifications:
1. Minimum of 8-years of demonstrated professional Tool Design experience.
2. MUST BE proficient in CATIA-V5 Generative Shape, Part, Assembly & Drafting workbenches.
3. Proficient in the use of GD&T.
4. Comprehensive knowledge and experience in aircraft tool design and fabrication, including composite lay-up and large assemblies.
5. MS-Office proficient.
6. Must be US citizen.
7. MUST HAVE Active/Final Secret clearance with most recent investigation completed within the last 5-years.

Desired:
1. CATIA-V4 or V6 experience.
2. Experience in structural analysis.
3. Experience working in a fast paced, developmental environment.

Education:
1. Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 12494
Job Location: Palmdale, CA
Rate: $85.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 12 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Back to Advanced Job Search