Job Search Results

202 listings were found that matched your search words: Keywords: CAD ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2024/03/28 Thursday 07:24AM Pacific Time by ContractJobHunter. )

Listings 1 - 202

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineers

Description:
Skill set:
Must have Primary and secondary structural design experience. Light aircraft (FAR 23) is preferred.

Excellent detail design skills, along with a combination of composites and metal part and assembly design background. Must have CATIA V5 and CPD experience (composite part design workbench in CATIA).


Position Responsibilities
Under the direction of project design engineering, serve as a member of a design team providing structural detail design for commercial light/general aviation aircraft. The main product line will require design-to-build activities for a commercial (Far 23) aircraft composed of primary/secondary metallic structure (some composite).

Minimum Requirements
· US Citizen, Green Card Holder or Permanent Residence Status
· A degreed candidate is highly desired
· 10 years of experience in Aerospace design is a minimum
· CATIA v5 (R25/R26 preferred)
· Entirely 3D CAD Design using Model Based Definition (MBD)
· Experience with ENOVIA\SmarTeam
· Experience with FAR 23 aircraft is preferred

The Structures Company is an AA/EOE.
 
Job Number: 242
Job Location: Manassas, VA
Rate: $72-$75/Hr. **DOE**
Per Diem: Yes
Duration: 9 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Tool Designer Creo (336)

Description:
*This is a full-time, 6-9 month contract position located in Grand Prairie TX*

We are seeking a skilled tool designer who will be creating fixtures, tooling and equipment. Candidate will develop test procedures and update existing technical manuals.



Daily duties will involve designing, developing and implementing industrial machinery and equipment taking into account accessibility, economy, mobility, and performance requirements. Will use CAD/CAM to design tools, such as Creo and Windchill, along with GD&T

Required:
*8+ years experience in tool design using Creo/Windchill.

*Strong GD&T

*Experience with tools, dies, gauges, jigs, fixtures, prototype and experimental model production.

*Familiar with factors in tooling such as as accessibility, economy, mobility, and performance requirements.
*Experience in analyzing and interpreting engineering drawings and technical documents and formulating test procedures.
*Must be able to get a clearance upon starting, which requires US Citizenship



Preferred:

*Active Secret Clearance
*SAP experience
 
Job Number: 336
Job Location: Grande Prairie, TX
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Structures Design Engineer - CATIA V5 - Los Angeles

Description:
Keltia Design, Inc. is a technical support services company in Everett, WA supplying CAD design, technical recruiting, and CAD training services to customers in the Aerospace industry on a permanent or contractual basis. We have been in business for over 18 years.

Our client in the Los Angeles area is looking for a CATIA V5 structural design engineer to work on a freighter conversion. Airbus experience and modifications to aircraft structure relative to cargo doors area and cargo handling systems is also desired.

Please describe your experience in detal with CATIA v5, emphasizing when it was last used for design, modeling, and drawing, and how it applies to Primary Structures.
 
Job Number: Keltia111417
Job Location: Los Angeles, CA
Rate: 50-55/hr
Per Diem: possible
Overtime: No
Duration: 6mo +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: KELTIA DESIGN INC
Attention: Emily
Address: 2333 SEA WAY BLVD STE 212
City, State: EVERETT, WA 98203
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembly Mechanic 2nd Shift - Aerospace - Everett WA

Description:
Keltia Design Inc is a technical support services company providing CAD design, CAD Training along with Specialized Technical Recruiting services to mainly the aerospace industry around the US. We have been in business since 2000.

We are working with a leading Aerospace Manufacturing client with multiple openings in the Everett WA and Kent WA Areas

Summary Description:
Assembles fabricated/machined metal parts and standards into partial or completed assemblies.

Job Duties and Responsibilities:
•Reads and interprets written work orders and aerospace blueprints and drawings to determine parts requirements and sequence of assembly step.
•Cleans or otherwise prepares part surfaces for assembly.
•Applies and cleans excess adhesives, lubricants, sealants, and other substances as required by work order, drawing, and/or blueprint instructions to piece parts for assembly.
•Inserts rings, pins, and other standards and fastens parts together using nuts, bolts, screws, clips, rivets, or other fasteners.
•Uses hammers, punches, pliers, screwdrivers, wrenches, rivet guns, and other hand tools to perform assembly operation.
•Installs bushings and bearings and uses hand tools to produce close fit between parts.
•Operates drill presses, presses, or riveting machines to assist in assembly operation.
•Uses micrometers, force gauges, calipers, torque wrenches, dial indicators, and other types of precision measuring tools and equipment. Reads measuring tools and interprets readings in performing assembly operations.
•Handles parts, subassemblies and assemblies with care to ensure those with finishes or special coatings are not damaged or blemished.
•Performs functional testing.
•Meets established standards for productivity and quality. Confers with supervisor when problems occur which impact expected levels of performance.
•Responsible for supporting and ensuring compliance to ISO 9001/AS9100 Quality Management Systems.
•Must contribute to a positive work environment.
•Performs any task required to support customer requirements and company goals.

Abilities:
•Ability to read, analyze, and interpret general business language, technical procedures, aerospace blueprints and drawings, manuals, governmental regulations, and safety procedures and instructions.
•Ability to add or subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
•Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.
•Ability to carry out instructions furnished in written, oral, or diagram form.
•Ability to use hands to finger, handle, or feel; reach with hands and arms; and talk or listen.
•Must be able to sit or stand for at least 10 hours a day.
•The employee must regularly lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds.
•Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions

Level Requirements:
•Minimum◦High school diploma or general education degree (GED) and one year or more related experience and/or training; or equivalent combination of education and experience.
 
Job Location: Everett, WA
Rate: DOE
Per Diem: N/A
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: KELTIA DESIGN INC
Attention: Rebecca
Address: 2333 SEA WAY BLVD STE 212
City, State: EVERETT, WA 98203
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Technicians - Top Rate + Expenses

Description:
Keltia Design Inc is a technical support services company providing CAD design, CAD Training along with Specialized Technical Recruiting services to mainly the aerospace industry around the US and Canada. We are based in Everett WA and have been in business for over 18 years.

Our client in the Moses Lake area of WA has a short term (1-2 months in length with the possibility to extend) contract assignment for highly experienced Avionic Technicians with wire installation, that preferably have an Airframe and Powerplant (A&P) licence certification.

The client will pay top rate with per diem and accommodations to get the right people there for the project.

Description:
* Perform assembly, installation and test tasks on wire harnesses, control boxes, and electromec assemblies per instructions.
* Perform verifications of flight hardware and documenting results in a clear, precise and complete manner
* Perform systems tests using Avionics test equipment
* Proven ability to troubleshoot basic problems
* Experience with EMC / EMI / RF testing etc
* Experience building wire harnesses including terminating and installing connectors.

Please e-mail Emily at emily@keltia-design.com with your updated resume, your desired pay rate, and the soonest available start date.
 
Job Number: KeltiaML2018
Job Location: Moses Lake, WA
Per Diem: Yes
Overtime: Possible
Duration: ST
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: KELTIA DESIGN INC
Attention: Emily
Address: 2333 SEA WAY BLVD STE 212
City, State: EVERETT, WA 98203
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CAD Designer

Description:
Must Be Eligible for a Clearance

Experience in the manufacture of Mechanical assemblies
Strong mechanical design background
Proficient in the Catia V5, Part Design module
Proficient in the Catia V5, Assembly Design module
Proficient in the Catia V5, Generative Shape Design module
Proficient in the Catia V5, Functional Tolerancing & Annotation module
Proficient in GD&T
ASME Y14.100 Engineering Drawing Practices
 
Job Number: 46079
Job Location: VA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CAD Designer (Aerostructures)

Description:
Our client is looking for a CAD Designer to work in San Antonio, Texas! Apply today with your most recent resume and if you meet the qualifications a recruiter will be in contact with you!

The ideal candidate for this position will perform the following tasks:
* Create 3D CAD model of all parts and assemblies, checking dimension of parts, materials to be used, relation of one part to another, and relation of various parts to whole structure or project.
* Work from actual aircraft dimensions, existing 2D drawings, sketches, scanned images, customer drawings, or specifications, to create 3D CAD models and drawings
* Create and revise production drawings (detail, assembly, and installation drawings).
* Utilize knowledge of standard engineering practices, mathematics, materials and other physical sciences to complete drawings.
* Work with CAD system creating, modifying and releasing, models, drawings and word documents under direct supervision of a supervisor for use by other departments and customers.
* Investigates design factors relative to ease of manufacturing, interchangeability, efficiency, cost and ease of procurement.
* Develop finished designs from sketches and layouts.
* Maintains an organized file system for parts, assemblies, engineering orders, and drawings prior to release.
* Work closely with all departments to ensure that the drawings convey the correct information.
* Contacts vendors to obtain necessary data and samples.
* Self-check own work for completeness, accuracy, compliance to standards, fits and stack-ups.
* Use the ANSI Y14.5 or equivalent drawing standards as guidelines.

Mandatory Qualifications and Experience:
* Bachelor’s degree or equivalent from an accredited university, college or technical school with a minimum of 5 years of aircraft design experience; or at least 10 years of related experience and/or training; or equivalent combination of education and experience.
* 3 years minimum Experience in CATIA version 5.
* Excellent knowledge of modeling and drawing practices used in the aviation industry.
* Capable of modeling complex components and producing production drawings.
* Good knowledge of GD&T.
* A good working knowledge of materials typically used in aerospace manufacturing.
* Overtime may be required on occasion

Desired Qualifications and Experience:
* Past Material Review Board (MRB) authority and experience is an additional plus.
* Some knowledge of lean manufacturing and advanced manufacturing techniques is a plus.
* CNC programming is a plus. Special training and skills should be noted on application by applicant.

The ideal candidate for this position will possess the following skills and characteristics:
* Normal physical exertion required for periods of working on foot or standing.
* Requires kneeling on occasion in performance of duties.
* Requires ability to twist, bend, squat, climb and/or other body movements to successfully accomplish the requirements of the position.
* Requires the use of either or both hands for grasping items.
* Manual dexterity and the ability to push/pull, i.e.: open/close file cabinets and/or handle machinery is required.
* Requires the ability to reach above shoulder height in accomplishing job tasks.
* Requires the ability to walk on uneven surfaces.
* Sufficient vision required to successfully accomplish the requirements of the position.
* Requires sustained periods of concentration.

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 129526
Job Location: San Antonio, TX
Duration: 1+ years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Machinist - Aerospace - Ellensburg WA Area

Description:
Keltia Design Inc is a technical support services company providing CAD design, CAD Training along with Specialized Technical Recruiting services to mainly the aerospace industry around the US. We have been in business since 2000.

CNC Machinist

Sets up and operates a variety of machine tools such as lathes, milling machines, shapers, planers, and precision grinders to make metal parts, mechanisms, tools, or machines to exacting tolerances and dimensions.

Responsibilities
Interprets blueprints, sketches, and engineering specifications; determines sequence of operations, number of cuts required, and method of setup; uses a variety of machinist's hand tools and precision measuring instruments; makes standard shop computations relating to dimensions of work, tooling, feeds, and speeds; measures, marks, and scribes dimensions and reference points to lay out stock for machining; fits and assembles precision parts into mechanical equipment and determines material, parts, and equipment required.

Some machines may be numerically controlled. May monitor and verify quality in accordance with statistical process or other control procedures and certify/test product.

Here are the possible Benefits with this Client
Medical, dental, vision, long term disability and life insurance benefits
PTO/ Holiday pay - Eligible upon hire
401(k) plan with Company matching

Qualifications
Must be able to efficiently setup and run one or more of the following types of equipment independently and meet expected manufacturing standards:
CNC Mill
CNC Turn
Experience & Knowledge
Required knowledge of GD&T, and ability to read blueprints, parts drawings, and setup books.
Preferred Math skills such as algebra, geometry, and trigonometry.  Desire to work in team environment: work positively and collaboratively with others, contribute to the work cell, be open and receptive to ideas and feedback, and treat others with respect
Skills & Competencies:
High school diploma or equivalent with 1-2 years related experience.
Post high school coursework or professional certification preferred.
 
Job Location: Ellensburg, WA
Rate: DOE
Duration: Contract to Direct
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: KELTIA DESIGN INC
Attention: Becky
Address: 2333 SEA WAY BLVD STE 212
City, State: EVERETT, WA 98203
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Machinist 1st and 3rd Shift- Aerospace - Everett, WA area

Description:
Keltia Design, Inc is a technical support services company supplying technical personnel, training, and CAD design services to customers in the Aerospace industry on a permanent and contractual basis. We have been in business since 2000.

We have a client in the Everett, WA area (NOT Boeing) currently seeking several machinists to join their aircraft component manufacturing team. This is a weekend/night shift of 3 twelve hour shifts with pay for 40 hours.
Summary Description: Sets up and operates computer numerical control (CNC) machines, machining centers, or manual machines to fabricate metallic parts.

Job Duties and Responsibilities:
•Studies blueprints, sketches, drawings, manuals, specifications, or sample parts to determine dimensions and tolerances of finished work piece, sequence of operations, and setup requirements.
•Measures, marks, and scribes dimensions and reference points on material or work pieces as guides for subsequent machining.
•Selects, aligns, and secures holding fixtures, cutting tools, attachments, accessories, and materials on machines such as mills, lathes, and jig borers.
•Calculates and sets controls to regulate machining factors such as speed, feed, coolant flow, and depth and angle of cut, or enters commands to retrieve, input, or edit computerized machine control media.
•Starts and observes machine operation to detect malfunctions or out-of-tolerance machining, and adjusts machine controls or control media as required.
•Verifies conformance of finished work piece to specifications.
•Sets up and operates machine on trial run (prove-out), when afforded, to verify accuracy of machine settings or programmed control data.
•Documents all information pertaining to the setup and operation of each job assigned. This is accomplished with sketches, photos, and written descriptions, and includes the responsibility to keep this documentation neat, easy to read and up to date.
•Confers with Manufacturing Engineering, Programmers, Planners, and other personnel to resolve machining or assembly problems.
•Takes responsibility for maintaining good housekeeping practices with assigned machines and immediate work areas.
•Applies good technical practices to care for and prevent damage to machining and measuring equipment.
•Meets established standards for productivity and quality. Confers with supervisor when problems arise impacting expected level of performance.
•Responsible for supporting and ensuring compliance to ISO 9001/AS9100 Quality Management Systems.
•Must contribute to a positive work environment.
•Performs any task required to support customer requirements and company goals.

Abilities:
•Ability to read and interpret documents such as safety rules, operating and maintenance instructions, work orders, specifications, aerospace blueprints and drawings, and procedure manuals.
•Ability to communicate effectively with managers or employees.
•Ability to carry out instructions furnished in written, oral, or diagram form.
•Ability to define problems, collect data, establish facts, and draw valid conclusions.
•Ability to use basic hand tools including precision measuring equipment.
•Must be able to sit or stand for at least 10 hours a day.
•Ability to frequently lift and/or move up to 25 pounds, and occasionally lift and/or move more than 50 pounds.
•Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Level Requirements:
•Minimum◦Associate’s degree (A.A.) or equivalent from a two-year college or technical school, OR INDUSTRY EXPERIENCE

Here are the possible Benefits with this Client
Medical, dental, vision, long term disability and life insurance benefits
PTO/ Holiday pay - Eligible upon hire
401(k) plan with Company matching
 
Job Number: KD01-1415
Job Location: Everett, WA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: KELTIA DESIGN INC
Attention: Becky
Address: 2333 SEA WAY BLVD STE 212
City, State: EVERETT, WA 98203
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Cadence HDL Librarian (77)

Description:
We are seeking a CAD Librarian to organize and maintain our design documents. Will create, maintain, and organize footprints/geometries, create schematic symbols, per IPC Specifications related to Electronic printed circuit board (PCB) Designs (holes, pad sizes, clearances).



Daily work may include, general EPCAD library support, creating JEDEC footprints for various packages from discretes to thousand-pin FPGAs, creating symbols in Cadence HDL 16.6, 17.2. Working within the guidelines of ANSI/IEEE Standard 315A. Checking and verifying JEDECs that other librarian and engineers have created.



Required:
*4 years’ experience performing in a CAD/Design Documentation Librarian Function.
*Experience in Cadence HDL, preferably version 17.2 or 16.6
*Experience creating schematic symbols /JEDEC footprints
 
Job Number: 077
Job Location: Grand Prairie, TX
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Circuit Board Designer - Cadence Allegro (320)

Description:
*This is a full time, 1 year contract position, located in Hudson, NH*



We are looking for an Electronic Designer that has the ability to create 5+ layer layouts of printed electronic circuit boards using Cadence Allegro and Cadence Concept.



Candidate will create complete deliverable fabrication package and fabricate both the bare board and assembly, enter design rules into Cadence constraint manager, prepare layouts using IPC-2221, modify and create new to schematic diagrams with Schematic Capture, Cadence Concept HDL5, working with ECOs and Oracle PDM tools to direct draftspeople to make changes into drawings.



Required:
*15+ years’ experience in Printed Circuit Board layout, most of which, using Cadence Allegro 17.2 (16.6 may also be acceptable)
*Good knowledge of Cadence Constraint Manager and Concept HDL 5.
*Familiar with IAW IPC-2221 standards, ECOs, BOMs, and PDM tools
*Knowledge of Signal Integrity and Designs
*AS degree in engineering technology, drafting or equivalent.
Pluses:
*BSEE or BSME
 
Job Number: 320
Job Location: Hudson, NH
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Unigraphics Design Engineer

Description:
Sr. Design Engineer


Location: Colorado Springs, CO

Contract with potential to convert to permanent




Position Purpose/Objective

The Design Engineer is charged with creating robust designs of structural components, electro-mechanical mechanisms, upholstery, cushions, decorative panels, and assemblies of these components. These designs are created using 3D CAD modeling software; and verified through finite element analyses and testing. The individual contributor will provide engineering deliverables through all phases of development from concept generation through certification testing and initial production implementation. This includes identifying root cause to issues, analyzing alternatives and executing the optimal design solutions. In addition, the individual will support efforts for design release, compliance to requirements, and internal cross-functional activities. In certain cases providing technical direction to engineering resources at our Global Engineering Center - India can be expected.




Essential Responsibilities:

Successfully execute design and development tasks required to certify and release specialty aircraft seats

Execute designs utilizing Unigraphics NX CAD system and Team Center Product Lifecycle Management software

Work as part of a cohesive engineering team and Integrated Product Develop Team (IPDT)

Understand requirements and evaluate new product structural integrity and functionality in support of meeting those requirements

Facilitate necessary regulatory and customer requirement testing to ensure product safety

Interact with internal and external customers and ensures satisfactory deliverables

Assist Engineering Management to coordinate the timely delivery of product design and customer proposal requests

Conceptualize and prepare preliminary and final detail design and documentation of systems components and assemblies

Support testing including the design and release of test fixtures

Create conceptual designs for proposals and document designs in technical documents

Work as a liaison with multi-site technical teams in Peshtigo WI, India, and Poland

Adhere to all UTAS rules and codes of conduct

Perform other duties as required




Education Required:

BA/BS Aerospace or Mechanical Engineering degree with at least 5+ years’ experience

MA/MS Aerospace or Mechanical Engineering degree with at least 2+years’ experience




Experience Required: Indicate the minimum years of experience and type of experience required to effectively perform the essential functions and responsibilities of this position.

At least 5 years working as a design engineer, preferably in a manufacturing environment

Strong communication skills

Strong interpersonal skills and ability to work in a team environment

Strong analytic skills including Root Cause Analysis, Strength of Materials, Statics

Unigraphics/NX CAD experience




Preferred:

Experience presenting solutions to internal and external customers

Experience with manufacturing processes (machining, sheet metal, plastic injection molding, plastic thermoform. . . )

Experience with Plant Operations and Assembly

Experience with Finite Element Modeling and Analysis

Experience working with international engineering support

Knowledge of upholstery design and execution

Team Center and Team Center Multi Site PLM experience

Experience in aerospace requirements/design

Knowledge of FAA and aerospace specifications

International design collaboration experience







Travel:


10% of time traveling




____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 55340
Job Location: Colorado Springs, CO
Rate: $33
Per Diem: Possible
Overtime: Possible
Duration: 6+ months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer / NX OH

Description:
Request number: 5753
Job title: Design Engineer
Number of openings: 2

Position location: Orville - OH
Employment type: Contract
OT exempt: No

Shift: 1st
Education Requirement: BS/BA
Driving on company time?: No

Maximum Hourly Pay Rate: 34
Start Date: 12/17/2018
Tentative End Date: 12/16/2019

Function:
As a Mechanical Design Engineer with Moog Flo-Tork, you'll play a key role in the analysis, conceptual design, and development of hardware used on military and commercial vehicles and equipment.

Here's more of what you can count on:
• Designing new actuators
- Analyzing and refreshing designs of actuators for previous ship classes
• Opportunities to use a broad range of skills. Our site is relatively small and you’ll be expected to utilize multiple engineering skillsets, but also will have the ability to tap into the resources and expertise of many other sites and groups
Keys to be considered a strong candidate:
• BS Degree in Mechanical Engineering and about 5 years of related engineering experience
• FEA and 3D CAD experience (NX) is a plus
- GD&T and experience with mechanical tolerance stackups
- Self-starter, with an aptitude for creative synthesis, and the ability to utilize and quickly learn advanced design and/or analysis techniques
• Experience with military designs/requirements
- Solid communication skills - this won't be that engineering job where you just sit at a computer all day!


Request status: Open
 
Job Number: MB-5753
Job Location: Orville, OH
Rate: 34/hr
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer / Solidworks CREO NX MCad ANSYS Sinda NY

Description:
Request number: 5731
Job title: Design Engineer
Number of openings: 1
Position location: East Aurora - NY
Employment type: Contract
OT exempt: No

Shift: 1st
Education Requirement: BS/BA
Driving on company time?: No
Maximum Hourly Pay Rate: 55
Start Date: 12/10/2018
Tentative End Date: 03/11/2019

Function:
The Design Engineering Associate will work closely with other engineers, collectively developing thoughts and sketches into conceptual layouts, solid models, drawings, and schematics in support of development and product design. Tasks include organization and planning of the number and types of drawings, part selection, parts lists generation, developing complex design layouts and related packaging support documentation. The incumbent is responsible for performing Tolerance Analysis in conjunction with utilization of GD&T methodologies to meet both design, manufacturing, and inspection requirements. The incumbent must also have a working knowledge of configuration management control of product design.

Ideally experience and in-depth knowledge in utilization of Siemens NX Mcad design software is strongly desirable. Additionally experience using 3D Mcad software package ie: Solidworks or PTC Creo is a plus. Experiential knowledge of Teamcenter PLM is desirable as well.
It 's desirable for the candidate to have experience in customizing their Mcad environment in order to take advantage of the Mcad functionality promoting cad and design efficiency.


Other Requirements
Thermal Analyst for space hardware with 5+ years experience.
• This role will require a highly motivated individual with the ability to multi-task among several programs with competing demands
• Experience with thermal analysis techniques is required
• Preferred software experience with Siemens NX, ANSYS, and Sinda/G
• Experience with Thermal Desktop is desired, but not required
• Experience with structural analysis is also desired, but not required

Request status: Open
 
Job Number: MB-5731
Job Location: East Aurora, NY
Rate: 55/hr
Duration: 3 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Digital Design Engineer

Description:
Job Description:


  • Client is seeking an individual with specialized skills in digital design tools with a firm background in computer operating systems and processes necessary to develop Client and unique digital circuit blocks and apply advanced algorithms in next generation silicon processes.

  • Primary job functions will include system administration, installation, and maintenance of an advanced circuit design environment consisting of commercial- and government- developed electronic design software.

  • Other duties may include supporting analog and RF design, developing standard cell libraries, and testing fabricated chipsets.

  • The selected candidate will represent our Client and DoD customers in outside discussions and technical forums.

  • This position will require some travel and require a security clearance.




Required Skills & Experience


  • A BS Degree in Electrical/Electronic Engineering or Computer Science with five (5) years of experience is required.

  • The applicant must be familiar with the Red Hat enterprise operating system or comparable Linux distributions, installation, maintenance, port security, backup, and shell scripting.

  • Familiarity with installation and maintenance of the advanced Cadence Design Systems IC design flow, Synopsys, and Mentor Graphics tools is required.

  • The applicant must be capable of debugging and troubleshooting electronic design tool installation/maintenance and interaction with 3rd party tools and process design kits.

  • Experience in deriving verification test benches from detailed specifications is required.

  • Familiarity with at least one (1) commercial scripting programming language such as

  • PERL or Python is required.




Desired Skills and Experience

Additional experience in digital circuit design is desired, including: Verilog/VHDL behavioral modeling, Digital IC design for manufacturing (JTAG insertion, test vector generation, Built-In Self-Test), an understanding of physical design issues including layout, familiarity with memory compilers, Cadence Skill code development, and fundamentals of Process Design Kits (PDKs).



Special Requirements/ Certifications:

Must be US citizen and eligible for security clearance. The National Agency Check with Inquiries (NACI) is a background investigation primarily for federal employees who will not have access to classified information. DoD clearance is not required.

Opportunity for contract-to-hire based on worker performance, worker attendance and dependability and client business needs
 
Job Number: 18-12267
Job Location: Dayton, OH
Rate: 0.0USD/Hour
Per Diem: SPLIT
Overtime: Possible
Duration: 2018-08-10 00:00:00.0
Start Date: 2018-05-13 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Cody Grimes
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer - 1 Contract Position - 1 Direct Position

Description:
Duties
Including, but not limited to, the following:
Generate Test Procedures and Reports
Develop pre‐defined designs
Use prescribed methods to develop solutions which impact functions or products within the Engineering Department
Use design initiative to develop solutions which impact specific areas of functions outside of the Engineering Department


Education
Bachelor of Science (BS) OR Master of Science (MS) in applicable engineering discipline from an accredited four‐year university
Equivalent experience which may substitute for education requirements: 14 to 16 total years of direct, applicable experience

Other Experience & Expertise
Specific experience with Garman G1000 avionic system
Familiarity with FAR Part 23
CAD Familiarity; Advanced skills with Siemen’s NX CAD software preferred


Authority and Responsibility
Successful with little to no supervision



Design Engineer III
Design Engineer: Design engineers design the parts, assemblies, and installations which ultimately become products. Core competencies for design engineering are: aeronautical, electrical, and mechanical. At a minimum, Design Engineers should hold a Bachelor of Science in an applicable engineering field.

Duties
Including, but not limited to, the following:
Generate Test Procedures and Reports
Develop pre-defined designs which have minimal impact to Federal Aviation Regulations (FAR) compliance
Use prescribed methods to develop solutions which impact specific areas of FAR compliance
Use design initiative to develop solutions which impact specific areas of FAR compliance and which require cross-functional coordination.


Education
Bachelor of Science (BS) OR Master of Science (MS) in applicable engineering discipline from an accredited four‐year university
Equivalent experience which may substitute for education requirements: 14 to 16 total years of direct, applicable experience

Other Experience & Expertise
Familiarity with FAR Part 23; thorough knowledge of specific areas of FAR Part 23
CAD Familiarity; Advanced skills with Siemen’s NX CAD software preferred.

The Structures Company is an AA/EOE.
 
Job Number: 255
Job Location: ID
Rate: $70-$85/HR - $100-$120K - **DOE**
Per Diem: Yes
Duration: 12 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Wire Harness 3

Description:
RESPONSIBILITIES:
Plans, lays outs, draws, and revises detailed part, assembly, and installation engineering drawings from basic layouts, established references, and standard data in a field of specialization such as structures, devices, mechanics, electrical, or electronics. Utilizes computer-aided design equipment and/or graphic tools such as, CAD, CAM or CATIA. Completes details of major layout drawings prepared by others in accordance with standard engineering drafting practices. Determines scaling; inserts necessary reference planes, centering and dimension lines, hidden line interpolations, and sectioning; prepares specifications for parts, assemblies, and installations; prepares complete production detail drawings; contributes design modifications to improve quality of product or facilitate manufacturing operations.
Responsibilities will include drafting of electrical cable designs and electrical assemblies for aerospace programs utilizing AutoCAD Electrical. Create preliminary block diagrams, wiring diagrams and detailed assemblies such as cable assemblies, Circuit Breaker assemblies, Relay assemblies etc. Candidate will work with a team to develop work products that are generated in accordance with existing templates, checklists and standards. Work products are peer reviewed for design accuracy and quality. Must have a basic understanding of electrical engineering concepts.

REQUIRED EXPERIENCE:
High School diploma or equivalent and 4 years' additional education and/or related experience.
Preferred Qualifications:
Experience developing drawings to ASME Y14.X standards, using CPLM or similar configuration management tools. Knowledge of instrumentation wiring applications, TEMPEST design constraints on electrical cable wiring, EMI/EMC effects on electrical cable wiring, aircraft-type cable assemblies and MIL type wiring and components such as connectors, back shells, shielding techniques, using design direction from Electrical Engineers. Microsoft Office and strong verbal and written communication skills and ability to work as a team are preferred.

EDUCATION:
High School diploma or equivalent is required.

HOURS:
9/80 workweek

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

Candidates responding to this posting must currently possess the eligibility to work in the United States. No third parties please.

Chipton-Ross provides equal employment opportunities to all employees and applicants for employment without regard to race, color, creed, religion, national origin, sex (including pregnancy), age, disability, sexual orientation, gender identity and/or expression, protected veteran status, genetic information, or any other characteristic protected by Federal, State or local law. This policy governs all areas of employment at Chipton-Ross, including recruiting, hiring, training, assignment, promotions, compensation, benefits, discipline, and terminations.



© 2018 Chipton‑Ross Inc. All rights reserved
 
Job Number: 176062
Job Location: melbourne, FL
Rate: Up to $27.00 DOE
Duration: 12 Months
Input Date: 11/14/2020
Firm Name: CHIPTON ROSS
Attention: chris conaway
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FPGA Design Engineer - Secret Clearance

Description:
Job Description:

• Perform FPGA Design: Architecture, Algorithms, VHDL code generation, VHDL simulation, Synthesis and Device Implementation & Constraints, System Integration and Test.

• Design Low/Med Complexity Circuit Card Assemblies (CCA) and Low/Med Complexity Field Programmable Gate Array (FPGA) starting from System De-composition and completing through System Integration and Test

• Perform CCA Design specifying Mixed Signal Technology circuits consisting of A/D, D/A, Processors, I/O communication and Programmable Logic (FPGA, CPLD) circuits.



Required Experience:

• BSEE, Computer Engineering. or other related technical field of study

• 4+ years of relevant experience as it pertains to digital design process within FPGA

• Knowledge of High Complexity Digital Design Techniques and Devices

• Hardware debugging skills & experienced in operation of Signal Generator, Logic Analyzer, Digital Oscilloscope and Embedded FPGA Debugging tools.



Desired Skills:

• MSEE

• General: Microsoft Office, DOORs (Requirement Specification and Tractability), Revision Control • Circuit Card: Cadence Allegro for Schematic Entry and to support PWB Layout/Route

• FPGA: Mentor Graphics HDL Designer, Mentor Graphics ModelSim/Questa, Synopsis Synplicity, Xilinx Client, Xilinx Vivado, Altera Quartus.



Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
 
Job Number: 18-49882
Job Location: Clifton, NJ
Rate: 0.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2019-06-21 00:00:00.0
Start Date: 2018-12-17 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Paul Chacon
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Instrument & Controls Designer

Description:
The Project Engineering Electrical Designer is responsible for completion of electrical design and drafting duties related to all areas of the plant and associated engineering disciplines. This individual works independently on job assignments, taking basic project information and producing finished engineering drawings suitable for bidding and construction. Documents produced include electrical schematics, connection diagrams, motor schematics, loop diagrams, electrical classification drawings, civil drawings, installation details, miscellaneous construction and as-built drawings. The design/drafter may be responsible for making project design decisions.

Scope / Specific Responsibilities of the Position:
 Electrical & Instrumental system design decision making.
 Applying sound project design engineering principles.
 Ensure systems and equipment are designed and installed in accordance with Bayer and regulatory standards.
 Assist with project reviews and system design.
 Review field installations to ensure compliance with design.
 Verification and completion of as-built drawings.
 Development construction drawings.
 Work directly with Project Engineers, Project Planners and Construction Field Coordinators to define project implementation requirements.
 Develop electrical & instrumentation drawings
 Field verification as required to support project design.

Principal Duties and Responsibilities:
Develop electrical & instrumentation drawings 60%
Updating as-built drawings 30%
Assist Project Construction Coordinator as needed with construction activities 5%
Work with Project Planner to establish resources 5%

Minimum Required Qualifications for the Position:
Education: Associate degree in Drafting/Design Technology or equivalent
10 years experience in electrical & instrumentation design in the process and industrial field

Ideal Candidate Will Possess:
 Excellent MicroStation CADD operating skills.
 Field verification technique knowledge.
 Understanding of electrical & instrumentation design practices and regulations
 In-depth knowledge of design codes, standards and regulations (i.e., OSHA, ADA, ASME, etc.) as may be applicable to electrical & instrumentation.
 Previous manufacturing experience - particularly with process related equipment (i.e., pumps, piping and heat exchangers, etc.).
 Capable of working independently.

Description of Specific Work Conditions and Physical Requirements:
This position is in a manufacturing environment that requires:
 The ability to ascend and descend stairs on a periodic basis.
 The ability to access all areas of the plant.
 This position requires working the Muscatine Plant core business hours.
 Extended hours and weekend work required when needed to support plant activities
 
Job Number: 96M
Job Location: Muscatine, IA
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: NOW
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Amy Kloeppinger
Address: 130 S BEMISTON AVE STE 500
City, State: CLAYTON, MO 63105-1928
Phone: 314/665-2127
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Landing Gear Design Engineer

Description:
This position is for a Landing Gear Design Engineer. The successful applicant will use their technical expertise to develop innovative and ingenious solutions to highly complex problems for advanced air vehicles. The candidate shall have advanced and thorough knowledge in landing gear, mechanisms, actuators, hydraulics, stress and deflection of structures, bearing selection and surface treatments with a broad knowledge of all related disciplines. The candidate will coordinate efforts across a wide range of functional organizations, such as Airframe Design, Quality Assurance, Planning, Tooling, Structural Analysis, Materials & Processes, Flight Sciences, Test and Manufacturing.

Responsibilities for this position include:

· Develop, test, and validate new or existing landing gear designs.
· Create and maintain 3-D CATIA models, assemblies and installations, system requirements, interface/supplier control drawings, performance specifications, system checkout procedures and statements of work.
· Create system requirements, trade studies, sub-component and flight test plans.
· Coordinate with suppliers, internal and external integrated product teams, management and the customer.
· Technical engineering support for manufacturing, installation and testing
· Plan and initiate their own work, lead teams, and mentor less experience engineers.
· Function as prime technical contact, manage system performance, budget and schedule.

Must be a US Citizen, position is located at a facility that requires special access.
· Bachelor or above degree in an engineering discipline
· Experience in landing gear design.
· Experience with CATIA, Solidworks, Pro Engineer, Creo, Unigraphics, NX or equivalent 3-D Computer Aided Design (CAD) tool.
· Experience with CATIA V5
· Experience with metallic and composite design
· Experience with hand stress analysis for initial part layout
· Experience with GD&T (Geometric Dimensioning & Tolerancing)

The Structures Company is an AA/EOE.
 
Job Number: 254
Job Location: CA
Rate: DOE
Per Diem: Yes
Duration: 9+ Months
Start Date: JANUARY 2019
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Machine & Tool Designer I ( Clearfield, Utah ) S8752572 & S8752574

Description:
Machine & Tool Designer I ( Clearfield, Utah ) S8752572 & S8752574
12 Month Contract

Pay Rate: $55-60/hr maybe more for the right candidate

**Active DoD Secret Clearance required

Tool Engineer to work in a composite aircraft and rocket motor fabrication environment.
Responsibilities:
• Project manages internal and external engineering personnel resources to provide production quality rocket motor and aircraft tooling in support of development programs
• Concepts and designs special tooling within an Integrated Product Team structure
• Manages tooling technical, quality and schedule
• Uses and/or manages Computer Aided Design (CAD) resources for tooling design
• Works with vendors to ensure successful fabrication of tooling
• Witnesses source inspection of special tooling at fabrication locations
• Proofs tooling upon receipt
• Maintains tooling documentation related to design, fabrication and proofing
• Provides tooling estimates for new tools
Education and Experience Requirements:
BS/MS in Mechanical, Aerospace or Civil Engineering, or related field plus a minimum of 2 years experience with BS or 0 years experience with MS in engineering. Preference given to candidates with experience in an aerospace manufacturing environment.
Screening Criteria
• DoD Secret Clearance required
• Design experience using 3D CAD systems (CATIA V5, NX) preferred
• NX experience preferred over CATIA V5
• Closed form and/or FEA stress analytical capability preferred
• Experience with project management including budget, schedule and technical
• Experience with design, fabrication and installation of tooling for rocket motor and/or aircraft composite parts and assemblies
• Experience with general metallic fabrication including welding, machining, and forming.
 
Job Number: S8752572
Job Location: Clearfield, UT
Rate: open
Per Diem: no
Overtime: yes
Duration: 12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Machinist - Lathes - 2nd Shift - Aerospace - Everett, WA

Description:
Keltia Design, Inc is a technical support services company supplying technical personnel, training, and CAD design services to customers in the Aerospace industry on a permanent and contractual basis. We have been in business since 2000.

We have a client in the Everett, WA area (NOT Boeing) currently seeking several machinists to join their aircraft component manufacturing team.

Machinist - Lathes - 2nd shift - Everett, WA
Summary Description: Sets up and operates computer numerical control (CNC) machines, machining centers, or manual machines to fabricate metallic parts.

Job Duties and Responsibilities:
•Studies blueprints, sketches, drawings, manuals, specifications, or sample parts to determine dimensions and tolerances of finished work piece, sequence of operations, and setup requirements.
•Measures, marks, and scribes dimensions and reference points on material or work pieces as guides for subsequent machining.
•Selects, aligns, and secures holding fixtures, cutting tools, attachments, accessories, and materials on machines such as mills, lathes, and jig borers.
•Calculates and sets controls to regulate machining factors such as speed, feed, coolant flow, and depth and angle of cut, or enters commands to retrieve, input, or edit computerized machine control media.
•Starts and observes machine operation to detect malfunctions or out-of-tolerance machining, and adjusts machine controls or control media as required.
•Verifies conformance of finished work piece to specifications.
•Sets up and operates machine on trial run (prove-out), when afforded, to verify accuracy of machine settings or programmed control data.
•Documents all information pertaining to the setup and operation of each job assigned. This is accomplished with sketches, photos, and written descriptions, and includes the responsibility to keep this documentation neat, easy to read and up to date.
•Confers with Manufacturing Engineering, Programmers, Planners, and other personnel to resolve machining or assembly problems.
•Takes responsibility for maintaining good housekeeping practices with assigned machines and immediate work areas.
•Applies good technical practices to care for and prevent damage to machining and measuring equipment.
•Meets established standards for productivity and quality. Confers with supervisor when problems arise impacting expected level of performance.
•Responsible for supporting and ensuring compliance to ISO 9001/AS9100 Quality Management Systems.
•Must contribute to a positive work environment.
•Performs any task required to support customer requirements and company goals.

Abilities:
•Ability to read and interpret documents such as safety rules, operating and maintenance instructions, work orders, specifications, aerospace blueprints and drawings, and procedure manuals.
•Ability to communicate effectively with managers or employees.
•Ability to carry out instructions furnished in written, oral, or diagram form.
•Ability to define problems, collect data, establish facts, and draw valid conclusions.
•Ability to use basic hand tools including precision measuring equipment.
•Must be able to sit or stand for at least 10 hours a day.
•Ability to frequently lift and/or move up to 25 pounds, and occasionally lift and/or move more than 50 pounds.
•Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Level Requirements:
•Minimum◦Associate’s degree (A.A.) or equivalent from a two-year college or technical college or equivalent experience in industry.

Here are the possible Benefits with this Client
Medical, dental, vision, long term disability and life insurance benefits
PTO/ Holiday pay - Eligible upon hire
401(k) plan with Company matching
 
Job Number: KD01-1415
Job Location: Everett, WA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: KELTIA DESIGN INC
Attention: Becky
Address: 2333 SEA WAY BLVD STE 212
City, State: EVERETT, WA 98203
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Machinist Millturn - 2nd Shift - Aerospace - Everett, WA area

Description:
Keltia Design, Inc is a technical support services company supplying technical personnel, training, and CAD design services to customers in the Aerospace industry on a permanent and contractual basis. We have been in business since 2000.

We have a client in the Everett, WA area (NOT Boeing) currently seeking several machinists to join their aircraft component manufacturing team.

Machinist Millturn - 2nd Shift - Everett, WA
Summary Description: Sets up and operates computer numerical control (CNC) machines, machining centers, or manual machines to fabricate metallic parts.

Job Duties and Responsibilities:
•Studies blueprints, sketches, drawings, manuals, specifications, or sample parts to determine dimensions and tolerances of finished work piece, sequence of operations, and setup requirements.
•Measures, marks, and scribes dimensions and reference points on material or work pieces as guides for subsequent machining.
•Selects, aligns, and secures holding fixtures, cutting tools, attachments, accessories, and materials on machines such as mills, lathes, and jig borers.
•Calculates and sets controls to regulate machining factors such as speed, feed, coolant flow, and depth and angle of cut, or enters commands to retrieve, input, or edit computerized machine control media.
•Starts and observes machine operation to detect malfunctions or out-of-tolerance machining, and adjusts machine controls or control media as required.
•Verifies conformance of finished work piece to specifications.
•Sets up and operates machine on trial run (prove-out), when afforded, to verify accuracy of machine settings or programmed control data.
•Documents all information pertaining to the setup and operation of each job assigned. This is accomplished with sketches, photos, and written descriptions, and includes the responsibility to keep this documentation neat, easy to read and up to date.
•Confers with Manufacturing Engineering, Programmers, Planners, and other personnel to resolve machining or assembly problems.
•Takes responsibility for maintaining good housekeeping practices with assigned machines and immediate work areas.
•Applies good technical practices to care for and prevent damage to machining and measuring equipment.
•Meets established standards for productivity and quality. Confers with supervisor when problems arise impacting expected level of performance.
•Responsible for supporting and ensuring compliance to ISO 9001/AS9100 Quality Management Systems.
•Must contribute to a positive work environment.
•Performs any task required to support customer requirements and company goals.

Abilities:
•Ability to read and interpret documents such as safety rules, operating and maintenance instructions, work orders, specifications, aerospace blueprints and drawings, and procedure manuals.
•Ability to communicate effectively with managers or employees.
•Ability to carry out instructions furnished in written, oral, or diagram form.
•Ability to define problems, collect data, establish facts, and draw valid conclusions.
•Ability to use basic hand tools including precision measuring equipment.
•Must be able to sit or stand for at least 10 hours a day.
•Ability to frequently lift and/or move up to 25 pounds, and occasionally lift and/or move more than 50 pounds.
•Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Level Requirements:
•Minimum◦Associate’s degree (A.A.) or equivalent from a two-year college or technical school, OR INDUSTRY EXPERIENCE

Here are the possible Benefits with this Client
Medical, dental, vision, long term disability and life insurance benefits
PTO/ Holiday pay - Eligible upon hire
401(k) plan with Company matching
 
Job Number: KD01-1415
Job Location: Everett, WA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: KELTIA DESIGN INC
Attention: Becky
Address: 2333 SEA WAY BLVD STE 212
City, State: EVERETT, WA 98203
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer
Location: Ocala, FL
Duration: 4 months
 
Description:
Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling. May incorporate inspection and test requirements into the production plan. Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality. Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques. Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensures processes and procedures are in compliance with regulations.
 
Skill/Experience/Education:
Mandatory
Bachelor's degree in Mechanical Engineering or Aerospace Engineering or related discipline from an accredited college. Minimum 2 years of professional experience.
 
Desired:
Experienced with SAP
Experienced with Microsoft, Office (PowerPoint, Access, Word, Excel).
Knowledge of electro-mechanical assembly, industrial processes, technical writing, and teaming.
Strong written and verbal communication skills.
Knowledge of Lean manufacturing concepts and techniques,
Pro-E, or equivalent CAD software, tool design, electronic, packaging design, and MRS, concepts
Leadership experience
Experience in a Manufacturing environment.
 
Skill Matrix:
Skill Name                                            Description                                                                                                           Level                Years   Mandatory (Yes/No)
Work Instruction Development  Development of Work Manufacturing Instructions for CCA or C&H build in SAP.      3                      0-3 Years                        Yes
Hardware Process Development            CCA, ECA, and/or C&H                                                                              3                      0-3 Years                        Yes
Direct Production Support         Provide direction and training to hourly production workers                                                        5                      0-3 Years                      Yes

Please send resume at rchaudhary@iconma.com or call (804)915-9602
 
Job Number: 18-20523
Job Location: Ocala, FL
Rate: Open
Per Diem: YES
Overtime: Possible
Duration: 4 Years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Rohit
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer has experience in a Manufacturing or Mechanical Environment. Should have good communication and customer satisfaction skills. Preferred Experience with ERP or Manufacturing Planning Software and Microsoft Office Software.

Manufacturing Engineer Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.



Manufacturing Engineer performs technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform producibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Manufacturing Engineer has proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.


Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.
 
Job Location: Savanna, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer (2 needed, Retrofit)

Description:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment

Unique Skills:
Solumina and SAP experience preferred

Principal Duties And Responsibilities:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing.
• Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
• Author DRDI/DMT rework instructions to support effective corrective actions.
• Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements.
• Participate in Design for Manufacturing assessments with Engineering.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Support all Safety, Sustainability and Ergonomic Initiatives.

Other Requirements:
• Proven knowledge of Lean and/or Six Sigma principles.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc.
• Lean Six Sigma Greenbelt Certification or higher preferred.

Experience/Education:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen months Manufacturing Engineering, planning, or related technical experience.

aircraft aerospace
 
Job Number: 24-307
Job Location: Savannah, GA
Rate: $52.50
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer (4 needed, Wing Assembly)

Description:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Unique Skills:
• Preferred Experience in a Manufacturing or Mechanical Environment. Should have good communication and customer satisfaction skills. Required Experience with ERP or Manufacturing Planning Software and Microsoft Office Software.
• SAP and or Solumina experience preferred.

Education and Experience Requirements:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen months Manufacturing Engineering, planning, or related technical experience.



Principle Duties and Responsibilities:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
• Author DRDI/DMT rework instructions to support effective corrective actions.
• Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
• Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.
• Proven knowledge of Lean and/or Six Sigma principles.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
 
Job Number: 24-286
Job Location: Savannah, GA
Rate: $50
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer (Composites)

Description:
• Exposure to Composite manufacturing processes and tools such as clean room layup techniques, Autoclaves, Gerber, CNC machining, NDT inspection methods and/or experience troubleshooting fabrication issues are highly desirable.
• Experience with SharePoint/SAP/SOLUMINA/Majestic Systems (TruLASER,TruNEST) are preferred.

Requirements:
• Proven knowledge of Lean and/or Six Sigma principles.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc.
• Lean Six Sigma Greenbelt Certification or higher preferred.

Education and Experience Requirements:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen months Manufacturing Engineering, planning, or related technical experience.

Essential Functions:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform producibility studies from engineering drawings.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• Utilize CADAM/CATIA data and nesting software to generate flat patterns, Master Models, NC data, and ply nests to meet Engineering and Manufacturing requirements.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
 
Job Number: 24-359
Job Location: Savannah, GA
Rate: $52.50
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer - Level 3

Description:
Location: Canoga Park, CA
Rate: Level 3 = $40.00 - $48.00/HR
Duration: 6 month contract
Shift: 2nd Shift (2:45 PM to 11:15 PM)
Per Diem Split: Yes (if eligible)


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role **

** Looking for go getters with positive, can-do attitudes. Candidates must be open to learning and be able to take initiative. This is by far the most important attribute needed **

** In-person interviews strongly preferred, so local candidates highly preferred **

Duties:
The Manufacturing Engineer classifications are responsible for design, fabrication, modification, analysis and evaluation of manufacturing operations, processes, procedures and production layouts for the support of manufacturing/assembly operations such as rocket motor propellant and/or insulation manufacture, equipment installation, machining, metal forming, welding and brazing, and material handling.


Skills:
Required Skills:
- Designing and planning of layout component fabrication, assembly and material handling, planning of sequence of operations, and specification procedures.
- The scope of responsibility will be for several mechanical components or as a process engineer supporting new and developing process.

Desired Skills:
- Tight tolerance machining, Welding, Design systems (ProE, CATIA, VisMockup, CAD/virtual manufacturing).
- Manufacturing fabrication and assembly processes and systems. Verbal and written communication.
- Project management skills and MS Office applications ( Word, Excel).
- Experience with Maestro, Delmia and Windchill are preferred, not required.
- Aerospace experience preferred but not required.


Education:
- Requires a Bachelor's degree in an appropriate discipline and 5 years of related experience, or an equivalent combination of education and experience.
 
Job Number: 9853
Job Location: Canoga Park, CA
Rate: $40.00 - $48.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
The ideal candidate for this position will perform the following tasks:
* Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed).
* Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
* Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
* Author DRDI/DMT rework instructions to support effective corrective actions.
* Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
* Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
* Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
* Investigate and assist in preparing justification for equipment and facility requests.
* Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements.
* Participate in Design for Manufacturing assessments with Engineering.
* Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
* Perform audit of co-workers output based on defined requirements and procedures.
* Must demonstrate knowledge of ME policies and procedures.
* Incorporate Lean Manufacturing Methodology into existing and future processes.
* With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
* Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
* Support all Safety, Sustainability and Ergonomic Initiatives.
* Aid in development and maintenance of Business Continuity Plan

Mandatory Qualifications and Experience:
* Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
* 18 months Manufacturing Engineering, planning, or related technical experience.
* Proven knowledge of Lean and/or Six Sigma principles.
* Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
* Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.

Desired Qualifications and Experience:
* Lean Six Sigma Greenbelt Certification or higher preferred.
* Strong understanding of Configuration Management SAP ERP System experience preferred
 
Job Number: 129521
Job Location: Savannah, GA
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $52.50/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
Solumina and SAP experience preferred.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 10243
Job Location: Savannah, GA
Rate: $52.50/HR
Per Diem: Split Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Unique Skills:
• Strong Configuration Management Skills SAP/ERP System experience preferred

Principal Duties And Responsibilities:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing.
• Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
• Author DRDI/DMT rework instructions to support effective corrective actions.
• Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements.
• Participate in Design for Manufacturing assessments with Engineering.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.


Other Requirements:
• Proven knowledge of Lean and/or Six Sigma principles.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc.
• Lean Six Sigma Greenbelt Certification or higher preferred.

Experience/Education:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen months Manufacturing Engineering, planning, or related technical experience.
 
Job Number: 24-287
Job Location: Savannah, GA
Rate: $50
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II (2 needed, Retrofit)

Description:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment

Principal Duties And Responsibilities:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing.
• Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
• Author DRDI/DMT rework instructions to support effective corrective actions.
• Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements.
• Participate in Design for Manufacturing assessments with Engineering.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Support all Safety, Sustainability and Ergonomic Initiatives.

Other Requirements:
• Proven knowledge of Lean and/or Six Sigma principles.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc.
• Lean Six Sigma Greenbelt Certification or higher preferred.

Experience/Education:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen months Manufacturing Engineering, planning, or related technical experience.
 
Job Number: 24-301
Job Location: Savannah, GA
Rate: $55
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II (Mods, rework, cabin)

Description:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed).
• Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
• Author DRDI/DMT rework instructions to support effective corrective actions.
• Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform producibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements.
• Participate in Design for Manufacturing assessments with Engineering.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Support all Safety, Sustainability and Ergonomic Initiatives.
• Aid in development and maintenance of Business Continuity Plan.
• Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
• Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements:
• Proven knowledge of Lean and/or Six Sigma principles.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
• Lean Six Sigma Greenbelt Certification or higher preferred.

Education and Experience Requirements:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen months Manufacturing Engineering, planning, or related technical experience.
 
Job Number: 24-302
Job Location: Savannah, GA
Rate: $50
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II - Composites

Description:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

UNIQUE SKILLS
• Preferred candidate must have composite material structure manufacturing or aerospace manufacturing assembly experience.
• Solumina and/or Catia experience desirable.

EDUCATION AND EXPERIENCE REQUIREMENTS
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen months Manufacturing Engineering, planning, or related technical experience.

REQUIREMENTS
• Proven knowledge of Lean and/or Six Sigma principles.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc.
• Lean Six Sigma Greenbelt Certification or higher preferred.

ESSENTIAL FUNCTIONS
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform producibility studies from engineering drawings.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• Utilize CADAM/CATIA data and nesting software to generate flat patterns, Master Models, NC data, and ply nests to meet Engineering and Manufacturing requirements.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Support all Safety, Sustainability and Ergonomic Initiatives.
• Aid in development and maintenance of Business Continuity Plan.
• Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
• Initiate and maintain accurate daily/weekly activity status based on work output, as required.
 
Job Number: 24-292
Job Location: Savannah, FL
Rate: $50
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II (Electrical Planning)

Description:
• Experience in Electrical Planning, Electrical Floor Support, Mechanical System Floor Support
• Candidates must have experience with Catia V5. Experience with Solumina and SAP is preferred.
• Candidates must possess proven knowledge of aircraft systems and structural assemblies/installations.

Principal Duties And Responsibilities:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform producibility studies from engineering drawings.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• Utilize CADAM/CATIA data and nesting software to generate flat patterns, Master Models, NC data, and ply nests to meet Engineering and Manufacturing requirements.
• With minimal supervision, lead/coordinate the implementation of projects between multiple organizations
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Support all Safety, Sustainability and Ergonomic Initiatives.
• Aid in development and maintenance of Business Continuity Plan.

Experience/Education:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen months Manufacturing Engineering, planning, or related technical experience.
 
Job Number: 24-019
Job Location: Savannah, GA
Rate: $52.50
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Material Handler - Aerospace - Everett, WA

Description:
Keltia Design Inc is a technical support services company providing CAD design, CAD Training along with Specialized Technical Recruiting services to mainly the aerospace industry around the US and Canada and Europe.
We have been in business since 2000

We are working with a leading Aerospace Manufacturing client with multiple openings in the Everett WA and Kent WA Areas

Material Handler - 1st Shift
Summary Description: Prepares parts, assemblies, and other items for shipment, and receives, verifies, and records incoming materials.

Job Duties and Responsibilities:
•Wraps and packages completed parts and assemblies and boxes for shipment to customer.
•Performs part-marking per written work order instructions.
•Verifies quantities to be part-marked, packaged, and shipped and examines outgoing shipments to ensure shipments meet specifications.
•By using the company’s MRP system to verify deliveries, put parts on hand and create packing slips.
•Prepares and secures cartons, crates, pallets, and other containers for shipment of goods.
•Stamps, stencils, labels, or affixes identifying information and shipping instructions onto cartons, pallets, crates, or containers as required.
•Determines method of shipment and posts weights and shipping charges, and affixes postage as necessary.
•Compares identifying information and counts, weighs, or measures items of incoming and outgoing shipments to verify information against bills of lading, invoices, orders, or other records.
•Unpacks and examines incoming shipments, rejects damaged items, records shortages, and communicates with the buyer and/or shipper to reconcile damages and shortages. Routes items to the appropriate departments as required.
•Monitors and maintains appropriate inventory levels of shipping materials and supplies.
•Uses handtrucks, pallet jacks, forklifts, and material handling equipment to move shipments from shipping and receiving area to storage or work areas.
•Meets established standards for productivity and quality. Confers with supervisor when problems arise which impact expected level of performance.
•Responsible for supporting and ensuring compliance to ISO 9001/AS9100 Quality Management Systems.
•Must contribute to a positive work environment.
•Performs any task required to support customer requirements and company goals.

Abilities:
•Ability to read and interpret documents such as safety rules, operating and maintenance instructions, blueprints, and procedure manuals.
•Ability to add, subtract, multiply, and divide using whole numbers, common fractions, and decimals.
•Ability to carry out detailed but uninvolved written or oral instructions.
•The employee is frequently required to use hands to finger, handle, or feel, reach with hands and arms, and talk or listen.
•The employee is regularly required to sit, stand, walk, stoop, or crouch.
•The employee must regularly lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds.
•Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Level Requirements:
•Minimum◦High school diploma or general education degree (GED) and six months or more related experience and/or training; or equivalent combination of education and experience.
 
Job Number: Keltia1016-1
Job Location: Everett, WA
Rate: DOE
Per Diem: N/A
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: KELTIA DESIGN INC
Attention: Emily
Address: 2333 SEA WAY BLVD STE 212
City, State: EVERETT, WA 98203
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Drafter/Designer

Description:
Responsibilities
Managing, executing and supporting mechanical design of assigned projects. Perform duties with limited supervision and a high degree of responsibility, ensuring that tasks are completed on schedule, within budget, to specifications to Cenco Quality standards.

Accountabilities:
Responsible for the mechanical design of assigned projects
Analysis, design, drafting, and verification
Perform calculations, in activities related to product, form, fit, structural requirements and function supporting project requirements
Team oriented, working with mechanical engineers and designers
Practice and encourage a First-Time-Right approach for the preparation of design deliverables per the approved budget and schedule
Establish and verify design criteria, ensuring that product designs are produced in accordance with company design and quality standards and practices as well as customer specifications
Ensure cost effective mechanical designs in compliance with specified technical and contractual requirements
Design with total cost awareness including factors such as ease of manufacturing, material availability, minimizing likely deviation requests, shipping constraints, ease of installation and product maintenance and usability in addition to the amount of engineering effort required to complete the task.
Completing assigned tasks with minimal supervision and in accordance with schedule and budget requirements
Providing ongoing feedback to management on deliverables
Acquiring ongoing knowledge necessary to perform job assignments and to improve technology, products and processes
Product support through design, manufacturing, installation, and commissioning, with travel as required to worldwide sites

Skills:
Highly organized, self starting, team oriented
CAD and CAE; 3D Solid Modeling (Siemens NX preferred), AutoCAD familiarity, FEA
Clear and effective written and oral communication with co-workers, management, manufacturers and customers
Strong analytical skills (with emphasis on structural design), FMEA, Risk analysis
Working knowledge of ASME Y14.5 Geometric Dimensioning and Tolerancing, ASME Y14.100 Engineering Drawing Practices , AWS D1.1 Structural Welding Code and ASME Y14.5-2009 Drafting Standards
Proficient with Microsoft Office - Word, Excel and PowerPoint

Education
Design of large custom steel assemblies to withstand specified loading conditions, including material selection and specification, sheet metal, weldments, and machining and strength characteristics
Designing in both US and SI units and materials
Regulatory experience with CE and ATEX is a plus
Two or four year degree in technical or engineering related discipline.
Strong mechanical design and drafting background with a minimum of 3 years design experience

Work Schedule
1st Shift, 5/40
 
Job Number: 176055
Job Location: New Brighton, MN
Rate: $32.61 - $37.68/hr
Per Diem: Possible
Overtime: yes
Duration: 6 months
Start Date: Now
Input Date: 11/14/2020
Firm Name: CHIPTON ROSS
Attention: Patrick Costello
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Technician CA

Description:
163665 Job ID# 21501BR
Title Mechanical Technician
Job Summary General Atomics (GA), and its affiliated companies, is one of the world’s leading resources for high-technology systems development ranging from the nuclear fuel cycle to remotely piloted aircraft, airborne sensors, and advanced electric, electronic, wireless and laser technologies.

We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

The Computer and Diagnostic Systems DIII-D/ITER team within the Energy affiliate company of General Atomics is seeking a talented Sr. Technician to work out of the Torrey Pines, CA office.

DUTIES AND RESPONSIBILITIES:

Under limited supervision, the Sr. Technician will be responsible for:•Responsible for fabrication, modification, installation, and documentation of complex laboratory, experimental or commercial equipment, including diagnostics (instruments)
•Interprets general instructions or detailed mechanical drawings, plans sequence of assembly, maintains quality assurance documentation and prepares sketches and schematics, with a working knowledge of RF and High voltage engineering principles
• Assist in the design and maintenance of basic lab, experimental, and commercial equipment.
•Maintains a clean and organized work space.
•Operates specialized equipment and/or performs tests requiring knowledge of processes pertinent to the organization, program or project.
•Responsible for execution of a set of laboratory experiments or for a complex laboratory function.
•Diagnoses and corrects operational problems or trouble sources in equipment or tests. Interprets basic information displayed to recognize when various operating measurements are drifting out of established parameters. Adjusts operating parameters to bring systems back to satisfactory operating conditions. Develops solutions to problems that occur including assisting in the design of specialized components.
•May provide direction to other technicians or craft personnel in construction and maintenance of equipment, operation of tests, or laboratory.
•Responsible for observing all laws, regulations and other applicable obligations wherever and whenever business is conducted on behalf of the Company. Expected to work in a safe manner in accordance with established operating procedures and practices.
•Perform other duties as assigned.


Qualifications Essential Qualifications Typically requires associate's degree or equivalent with seven or more years of experience. May substitute equivalent experience in lieu of education. Ability and willingness to work on systems which have unusual conditions such as high pressure, high voltage, high energy, cryogens, or radioactive materials. Knowledge of computer operations and applications pertinent to the field required. Must have analytical ability to read and understand detailed instructions, drawings and specifications. Communication skills necessary to write and record precise information. Special skills and expertise to use complex equipment or experimental techniques.
Additional Qualifications - Requires Associate’s degree or equivalent, with seven or more years of experience. May substitute equivalent experience in lieu of education.
- Ability and willingness to work on systems under unusual conditions involving high pressure gasses, high voltage, cryogens, high energy, radioactivity, etc.
- Proficiency in 3D CAD software such as Solidworks.
- Experience with various machining techniques (lathe, mill, CNC, etc.) and vacuum systems.
- Skill with soldering high precision assemblies.
- Must have analytical ability to read and understand detailed instructions, drawings and specifications.
- Must be able to lift up to 25 lbs.
- Communication skills necessary to write and record precise information.
- Experience with lasers, high voltage, RF electronics and basic knowledge of physics and electrical engineering is desired.
- Pay rate: $30-$35/hour
City San Diego
State California
Travel Percentage Required 0% - 25%
Clearance Required? No
Work Schedule Rule 5/40

Temp Assignment Duration (# of Days) 180
 
Job Number: JE-21501
Job Location: San Diego, CA
Rate: 30-35/hr
Per Diem: no
Duration: 6 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical or Piping Designer (OK)

Description:
Designer would be expected to have 5 to 15 years of experience.
Refinery Background.

Primary Functions/Responsibilities:

Safety:
Provide an environment and system that results in all work being conducted safely, environmentally friendly, and technically sound. All compliance requirements will be met.

Integrity:
Responsible, accountable, and will deliver on all commitments.

Responsibility:
Provide design and drafting expertise to develop, mechanical detail design packages for projects and turnarounds.

Provide quality design packages that satisfy the Refinery Standards and Guidelines.

Must be able to create a design schedule and complete projects in a timely manner.

Must be able to work with very little supervision.
Strong project and CAD experience.
(Microstation experience a plus)
Must be able to gather field data and measurements.
Must be able to climb stairs and ladders.
Strong team player.
Will review and check vendor drawings.

FOSTER DESIGN'S BENEFITS:
• Working for a 54-year old company
• Minimum 10 Paid Holidays, with no waiting period
• Immediate 401K participation, 1 year 100% vesting schedule, matching employer contribution
• Free Financial Consultant
• Medical/Dental/Vision/Prescription card – BCBS
• MetLife – Long Term Disability Insurance
• Vacation Accrual
• Per Diem Assignment Allowance, when applicable
• Per Diem Split, when applicable
• Paid Weekly (Direct Deposit)
 
Job Number: FD-010819OK
Job Location: Ponca City, OK
Rate: $BOE/HR
Per Diem: No - Possible Split
Overtime: Possible
Duration: 11 Months or longer
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Metallurgist - Aerospace - Seattle WA Area 10/2018

Description:
Keltia Design Inc is a technical support services company providing engineering design, CAD Training along with Specialized Technical Recruiting services to mainly the aerospace industry around the US and Canada and Europe.
https://keltia-design.com/open-jobs/


Our client is a national leader in aerospace R&D and manufacturing technology and is looking for an experienced Metallurgist to join their R&D Department to complement their ongoing R&D projects in Actuation Systems and other Aerospace Applications

This can be a contract position with the option of going direct if desired and an attractive compensation package is available.
10 Years experience with Aerospace applications desired.
This position will involve responsibility to support the design, R&D and manufacturing departments.
Requirements

Bachelor’s degree in Engineering and/or Materials Science preferred with. 10+ years’ experience in an aerospace environment
Good documentation skills and practices Proficient in Microsoft Office (Excel, PowerPoint, Outlook, MS Project)
Disciplined and high attention to detail Ability to communicate effectively with internal and external customers
Ability to work well in a diverse team environment and with minimal supervision
If you wish to be submitted please send an updated resume in Word format with your salary requirements and availability.
 
Job Number: KeltiaMAS1018
Job Location: Seattle, WA
Rate: DOE
Duration: Direct/Contract
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: KELTIA DESIGN INC
Attention: Emily
Address: 2333 SEA WAY BLVD STE 212
City, State: EVERETT, WA 98203
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NX CAD – Automotive Designer with Kinematics Focus

Description:
Job Details
This position is working with the engineering group that is responsible for certain mechanism components that are installed and packaged into the vehicle such as; Wiper Motors, Steering Columns, Accelerator and Brake Pedals. You’ll be responsible to package these OEM components and parts. You’ll design and concept the support brackets that are mainly made of sheet metal and plastics.
Your main focus is packaging, design and developing of the mounting brackets. Verify component motion of the mechanisms has the adequate clearances needed by using NX Kinematics application. You’ll also be working with several OEM vendors to figure out which models or features work best for the application.

Skills and Knowledge:
Creating Kinematics Models using NX Siemens CAD System
Familiarity with 3D Geometry and Coordinate Transformation.
NX Sheetmetal and Solid Modeling

Education Requirements
BS Degree preferred but not required.

Assignment Length
1-2 years
 
Job Number: 3343
Job Location: Portland, ORE
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: long term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: OLSA RESOURCES INC
Attention: Dina
Address: 3485 NE JOHN OLSEN AVE
City, State: HILLSBORO, OR 97124
Phone: 503/608-7895
Fax Phone: 503/608-7896
Website: www.olsaresources.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NX Mechanical Engineer - Electric Vehicle Chassis

Description:
One of the world's leading heavy-truck manufacturers is looking for an NX Cad Designer/Engineer to join their team! This group is developing prototype future vehicles. You can be a part of the cutting edge of engineering and technology of these special trucks.

Major Responsibilities:
Responsible to create and design mounting brackets
Create 3D solid and surfaced models
Create assemblies and sub assemblies.
Packaging components for fit and accessibility.
Great to be a able to conduct FEA internally to meet program milestones and deliverable s.
Conduct CAE analyses such as modal and vibration analyses, and other studies as required to support product development
Perform necessary analysis support such as recommendations to improve the design for strength.
Have PDM database structure experience
Education:

Must have Bachelors Degree in Mechanical Engineering.
 
Job Number: 5006
Job Location: Portland, ORE
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: Long term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: OLSA RESOURCES INC
Attention: Dina
Address: 3485 NE JOHN OLSEN AVE
City, State: HILLSBORO, OR 97124
Phone: 503/608-7895
Fax Phone: 503/608-7896
Website: www.olsaresources.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Piping/Mechanical Designer

Description:
The Project Engineering Piping/Mechanical Designer is responsible for completion of piping design and drafting duties related to all areas of the plant and associated engineering disciplines. This individual works independently on job assignments, taking basic project information and producing finished engineering drawings suitable for bidding and construction. Documents produced include engineering flow diagrams, civil drawings, detailed equipment arrangements, installation details, piping plans, piping isometrics, electrical drawings, miscellaneous construction and as-built drawings. The design/drafter may be responsible for making project design decisions.

Scope / Specific Responsibilities of the Position:
 Civil and Mechanical system design decision making.
 Applying sound project design engineering principles.
 Ensure systems and equipment are designed and installed in accordance with Monsanto and regulatory standards.
 Assist with project reviews and system design.
 Review field installations to ensure compliance with design.
 Verification and completion of as-built drawings.
 Development construction drawings.
 Work directly with Project Engineers, Project Planners and Construction Field Coordinators to define project implementation requirements.
 Develop equipment and material take-off and specifications.
 Surveying and field verification as required to support project design.

Principal Duties and Responsibilities:
Develop site plans, equipment layouts, piping plans and isometrics 60%
Updating as-built drawings 30%
Assist Project Construction Coordinator as needed with construction activities 5%
Work with Project Planner to establish resources 5%

Education
Associate degree in Drafting/Design Technology or equivalent

Ideal Candidate Will Possess:
 Excellent MicroStation CADD operating skills.
 Surveying and field verification technique knowledge.
 Understanding of mechanical and civil design practices and regulations related to system design, equipment layout and Mechanical.
 In-depth knowledge of design codes, standards and regulations (i.e., OSHA, ADA, ASME, etc.) as may be applicable to civil and piping work.
 Previous manufacturing experience - particularly with process related equipment (i.e., pumps, piping and heat exchangers, etc.).
 Capable of working independently.

Description of Specific Work Conditions and Physical Requirements:
This position is in a manufacturing environment that requires:
 The ability to ascend and descend stairs on a periodic basis.
 Capable of lifting and carrying 40 lbs.
 The ability to access all areas of the plant.
 This position requires working the Muscatine Plant core business hours.
 Extended hours and weekend work required when needed to support plant activities.

Use of 3d Plant Design, Cadworx and Naviswork a plus.
 
Job Number: 73M
Job Location: Muscatine, IA
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: NOW
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Amy Kloeppinger
Address: 130 S BEMISTON AVE STE 500
City, State: CLAYTON, MO 63105-1928
Phone: 314/665-2127
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Inspector - Aerospace - Anaheim CA

Description:
Keltia Design, Inc. is a technical support services company in Everett, WA supplying CAD design, technical recruiting, and CAD training services to customers in the Aerospace industry on a permanent or contractual basis. We have been in business for over 18 years.
We have several clients in the Anaheim area and one of them is looking for an experienced Quality professional to perform some Quality Inspections of their aerospace products.
Summary Description:
1) Inspection to be performed at Placentia Facility
2) Service type – Final Inspection prior to shipment
a. Types of inspection – Envelope dimensions (standard inspection equipment is used and available on site), manual/ general function (opening and closing with no specialized test equipment), and workmanship (cosmetics for paint, plating, sealant application).
b. Customer approved inspection plans with acceptance criteria for each product is to be used.
c. Customer has stated that they may send one of their “experts” provide initial training.
3) Product Types – designed aerospace products provided to Airbus Defense and Space (ADS)
a. Includes four mechanical latch assemblies and one machined bolt.
4) Service period – December 2018 thru March 2019
a. Anticipate one to two inspection activities per week
b. Anticipate 2 hours of inspection time per visit
 
Job Number: Keltia QI
Job Location: Anaheim, CA
Rate: DOE
Per Diem: NA
Overtime: NA
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: KELTIA DESIGN INC
Attention: Vinicius
Address: 2333 SEA WAY BLVD STE 212
City, State: EVERETT, WA 98203
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
RF Microwave Design Engineer 3 CA

Description:
RF Microwave Design Engineer 3 (Job Number: 18025908)

Number of Openings: 1

Location(s): United States-California-Azusa

Shift: 1st Shift

Target Start Date: Feb 25, 2019

Target End Date: Aug 31, 2019

Pay Rate: $55/hr

Work Schedule: 9/80

Duration of Assignment: 8-31-19

Northrop Grumman Aerospace Systems sector is seeking a RF Microwave Engineer 3 to join our team of qualified, diverse individuals. This position will be located in Azusa, CA.

The successful applicant will be assigned to support RF design, analysis, and test of passive RF Microwave weather sensors/systems, subsystems, and components. Specific assignments may include testing of RF subsystem and RF components, performing CAD simulations, supporting anomaly investigations, deriving RF requirements, performing system analysis, managing RF suppliers, and supporting receiver integration and test. Additional responsibilities may be assigned commensurate with performance or due to business needs.

Note that this role will work 1st shift with a flexible start time between the hours of 6:30 am and 9 am. Some off-shift work will be required as needed by the program.


Basic Qualifications:

BSEE + 5 years of RF or RF test experience or 13 years of experience may be considered in lieu of degree.


Preferred Qualifications:

BSEE + 10 years of RF and RF test experience
 
Job Number: MB-1709
Job Location: Azusa, CA
Rate: 55/hr max
Per Diem: no
Duration: 6 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
SENIOR ENGINEER

Description:
Senior Engineer



Summary: Working with minimal supervision this individual will be responsible for the design and development of environmental control system products and / or systems for aerospace applications. May work directly with customers and provide both technical and project leadership to internal and external resources.



Essential Duties and Responsibilities include the following:


  • Performs engineering assignments with limited supervision.

  • Assesses customer requirements and develops designs, or provide design direction, to meet requirements.

  • Prepare program plan and effectively identify and manage program risks.

  • Analyze problems and makes decisions on proper action to be taken.

  • Responsible for completion and accuracy of engineering documentation.

  • Prepares and presents design data in support of internal and Customer design reviews.

  • Support DFX (Design for Cost, Manufacturability, Reliability, etc.) efforts.

  • Prepares Development and Qualification Test Plans, Procedures and Test Reports.

  • Monitors and controls program cost and schedule.

  • Supports existing products.

  • Makes recommendations for design, cost, or process improvements including substantiating strategy.

  • Provides technical direction and advice to Business Development, Manufacturing and Quality organizations.

  • Performs assignments broad in nature requiring substantial ingenuity and originality usually acquired through industry experience. These assignments may involve:

  • Sophisticated product and technology development.

  • Rigid timetables and short lead schedules

  • Extensive planning and interaction with many support groups and departments.

  • Complex report writing and detailed testing for customer or regulatory approval.

  • Provides leadership to support personnel and less experienced engineering team members

  • Assists in planning and coordination with support groups.

  • Reviews project status, makes recommendations where necessary and instructs in details unique to industry.

  • May perform supervisory duties (train, mentor, evaluate, etc.) for departmental employees on specific tasks or projects.

  • Assists Business Development Department in proposal preparation and customer presentations; interacts with customers and suppliers on technical and program matters.

  • Communicates status accurately and regularly to Management, recommending solutions for problems encountered.

  • Assists Manager in departmental planning and operations.


QUALIFICATIONS


  • B.S. Degree in Engineering

  • 7 years' experience in design, development, qualification and production support of aerospace components.

  • Specific experience in aircraft environmental controls systems and components is highly desirable.

  • Excellent report-writing skills, presentation and customer interface skills.

  • Strong knowledge of CAD design and analysis tools.

  • Proficient in the use of MS Office software, experience with MS Project a plus.

  • Knowledge and experience of DO-160 / MIL-STD-810 requirements




Travel: Periodic travel required to support customer onsite meetings and reviews, both domestic and international.



Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-01294
Job Location: Seminole, OK
Rate: 0.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-01-10 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Kristy Thompson
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr I & E Designer (OK)

Description:
Looking for one instrument/electrical designer (Project Designer or Senior Designer), please send resumes to me at this email.

This designer needs 15 plus years of experience.

Primary Functions/Responsibilities:

Safety
Provide an environment and system that results in all work being conducted safely, environmentally friendly, and technically sound. All compliance requirements will be met.

Integrity:
Responsible, ethical, honest, accountable, and will deliver on all commitments.

Responsibility:
Provide design and drafting expertise to develop, instr/elect detail design packages for projects.

Provide quality design packages that satisfy the Refinery Standards and Guidelines.

Must be able to create a design schedule and complete projects in a timely manner.

Strong project and CAD experience.
(MicroStation experience a plus)

Strong Smart Plant Instrumentation
(SPI) would be a big plus (This is an instrument database that is widely used in the industry)

Must be a good communicator both verbally and written.
Must be able to gather field data and measurements.
Must be able to climb stairs and ladders.
Strong team player
Will be required to review and check vendor drawings.

FOSTER DESIGN'S BENEFITS:
• Working for a 54-year old company
• Minimum 10 Paid Holidays with no waiting period
• Immediate 401K participation, 1 year 100% vesting schedule, matching employer contribution
• Free Financial Consultant
• Medical/Dental/Vision/Prescription card – BCBS
• MetLife – Long Term Disability Insurance
• Vacation Pay
• Per Diem Assignment Allowance, when applicable
• Per Diem Split, when applicable
• Paid Weekly (Direct Deposit)
 
Job Number: FD-010619OK
Job Location: Ponca City, OK
Rate: $BOE/HR
Per Diem: No - but a PD Split is possible
Overtime: Possible
Duration: 11 Months or longer
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Manufacturing Engineer

Description:
SENIOR MANUFACTURING ENGINEER


DYNAMIC & GROWING OKLAHOMA BASED MANUFACTURER OF AIRCRAFT ENVIRONMENTAL CONTROL SYSTEMS IS SEEKING A SENIOR MANUFACTURING ENGINEER



RESPONSIBILITIES:


  • Develope and maintaining processes and procedures which insure product conformity

  • Evaluate processes and identify areas of improvement such as labor, material and reliability

  • Create manufacturing and assembly drawings when applicable

  • Create and control sketch drawings for production and purchasing

  • Interact with production to resolve assembly and test problems and identify and develop assembly tool needs


QUALIFICATIONS:


  • BS in Mechanical or Aero Engineering required

  • Minimum 5 years' experience required in manufacturing or quality related position

  • Auto Cad/Inventor training

  • Excellent verbal, writing and communication skills






Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-01114
Job Location: Seminole, OK
Rate: 100000.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-01-09 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Kristy Thompson
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Program Manager - Aerospace - Seattle WA Area 10/2018

Description:
Keltia Design Inc is a technical support services company providing engineering design, CAD Training along with Specialized Technical Recruiting services to mainly the aerospace industry around the US and Canada and Europe.
https://keltia-design.com/open-jobs/


We have several direct and contract Sr. Program Manager positions in the Seattle area working on aircraft actuation system components in an R&D and Manufacturing environment.

This position will involve responsibility to oversee and effect the on time delivery of several simultaneous aircraft related subsystems programs with support from the design, R&D and manufacturing departments.

This position will also require the development of new business or expanding the product line with the customer. Will also involve establishing milestones and monitor adherence to master plans and schedules,

will identify program problems and obtain solutions, such as allocation of resources or changing contractual specifications.

Leads the work of employees assigned to the program/project from technical, manufacturing and administrative areas.



Overview

The Senior Program Manager is responsible for managing assigned customer programs from proposal through production. In conjunction with Business Development, the Program Manager serves as a direct contact to the customer for program business matters and issues.

Responsibilities

Interface with Customer Contracting Personnel, Customer PM, Government Contracting Officer (CO), Government Task Leader (GTL), the contract level Contracting Officer’s Representative (COR), government management personnel and customer agency representatives.

Responsible for formulating and enforcing work orders (resource schedule, project statements)

Developing and maintaining program master schedules and milestones

Reviewing work discrepancies

Identifying/quantifying scope change issues

Coordinating RFQ responses

Generation of monthly cost, schedule, technical status reports

Supervising program personnel and communicating program goals to Team Members

Responsible for the overall contract performance including the profit and loss of the program(s) through the life of the contract(s)

Must have recent experience in project development from inception to deployment as well as expertise in the management and control of funds and resources



Qualifications

Bachelor’s degree in Engineering required

At least 5 years of direct program management experience in an highly regulated manufacturing environment, aerospace a plus

PMP or PGMP Certification is preferred

Must have demonstrated capability in managing multi-task contracts and/or subcontracts of various types and complexity and generation of monthly cost/schedule progress reports

Must have demonstrated capability in managing multiple projects in parallel

Strong business acumen coupled with mental aptitude and motivation to learn new functions and expand areas of expertise

Experience required with FARs, contractual requirements and contractual negotiations

Manage all major issues in primary practice areas with minimal supervision

Proven ability to track and report programs against schedule, budget and phase review objectives

Develop and implement recovery and action plans for off-track programs or unplanned events impacting programs

Demonstrate initiative and advanced interpersonal skills in team problem solving situations, relationship building and aligning with business goals

Excellent leadership, organization, communication and negotiation skills

Position requires frequent interaction with various levels of and Customer management

Proficiency with MS-Project program scheduling and resource allocation planning tools is essential

Familiarity with Government regulations including ITAR and Export Control

Ability and willingness to travel approximately 10%
 
Job Number: KeltiaPM1018
Job Location: Seattle, WA
Rate: DOE
Duration: Direct/Contract
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: KELTIA DESIGN INC
Attention: Emily
Address: 2333 SEA WAY BLVD STE 212
City, State: EVERETT, WA 98203
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer

Description:
Skill set:
Primary and secondary structural design of light aircraft (FAR 23). First wave will need to have a strong background doing primary airframe structural layout utilizing Catia V5. Later in the program, the focus will be on aircraft primary and secondary detail design utilizing Catia V5. A composite background with experience working with Catia V5 and CPD is ok, but only if there is also experience with metallic structural design.

Position Responsibilities:
Under the direction of project design engineering, serve as a member of a design team providing structural layout and detail design for commercial light/general aviation aircraft. The main product line will require design-to-build activities for a commercial (Far 23) aircraft composed of primary/secondary metallic structure (some composite).

Required:
· 10 years of experience in Aerospace design is a minimum
· 6000+ hours experience with CATIA v5 (R25/R26 preferred)
· Entirely 3D CAD Design using Model Based Definition (MBD)
· Experience with ENOVIA\SmarTeam
· Experience with FAR 23 aircraft much preferred
· Experience with Structural layouts, conceptual/preliminary design phase experience needed.
· US Citizen, Green Card Holder or Permanent Residence Status
· A degreed candidate is highly desired

The Structures Company is an AA/EOE.
 
Job Number: 238
Job Location: VA
Rate: Open
Per Diem: Yes
Duration: 10+ Months
Start Date: FEBRUARY 2019
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design Engineer

Description:
6-8 years equivalent knowledge/experience in designing and building complicated dies, gages, and fixtures
Experience in designing and building of complex tools.
Experience with designing and building aerospace tooling.
Professional in CAD design software (NX or SolidWorks).
Must possess good communication and organizations skills.
Computer literacy is a must, including competency in general MS Office applications, technical computer modeling, and statistical tools.
 
Job Number: 45664
Job Location: NH
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design Engineer

Description:
Location: Chula Vista, CA
Rate: DOE
Duration: 1 year contract
Per Diem Split: No

****MUST be a U.S. Citizen****

Job Description:
- Tool Design Engineer designs various tooling, fixtures for machining, welding, assembly, handling, ground support and composites tooling.
- This position will work directly with multiple engineering disciplines (Manufacturing, Product, Quality, Stress, etc.).
- The Tool Designer will also serve as technical support for tooling related issues on new and legacy product designs and manufacturing processes.
- Must have ability to prepare standard work packages for offload, and develop conceptual designs.
- In addition, be able to perform tool stress analysis.

Requirements:
- BS degree and 5-10 year's experience as a Tool Design Engineer in a Manufacturing Environment required (Aerospace preferred). Willing to accept experience in lieu of degree.
- Strong Mechanical/Manufacturing Aptitude.
- Good understanding of assembly, machining and composite manufacturing processes.
- Good understanding of tool fabrication processes including welding, machining, heat treat, etc.
- Good understanding of ANSI Dimensioning and Tolerances.
- Knowledge of CAD/CAM systems, CATIA V5 MBD (2000 hours minimum) experience preferred.
- Experienced in Lean manufacturing principles and strong aptitude towards implementing continuous improvement.
- Experienced in Microsoft Office applications (Word, Outlook, PowerPoint, etc.) and good technical writing skills.
- Experience with tooling stress analysis in FEM and classical methods.
 
Job Number: 10102
Job Location: Chula Vista, CA
Rate: DOE
Per Diem: No
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design Engineer III

Description:
Perform engineering work related to the design of tools and equipment used in the manufacture and support of aircraft.

UNIQUE SKILLS
• Must be proficient in Catia V5

PRINCIPAL DUTIES AND RESPONSIBILITIES
• Under minimal supervision, design, tolerance and annotate tooling in 3D CAD environment that will be used in the manufacture and support of Gulfstream aircraft.
• Collaborate with engineering, manufacturing engineering and operations to determine optimal manufacturing procedures.
• Present design concepts to a design review team composed of representatives from manufacturing engineering, industrial engineering, operations, safety and other Tool Design Engineers.
• Review and check Tool Designs, as required, to ensure conformance to specifications, intent, methods and procedures.
• Write procedures on use of tools.
• Assist Tool shop as needed, during Periodic and Conformity Inspections.
• Assist in formulating Tool Design policies, procedures, and specifications as required.

EDUCATION AND EXPERIENCE REQUIREMENTS
• Bachelor's Degree in Mechanical Engineering, a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Four (4) years drafting/design experience to include documented experience in a tool or machine shop environment. Tool Design experience required.
 
Job Number: 24-309
Job Location: Savannah, GA
Rate: $60
Per Diem: YES
Overtime: YES
Duration: ASAP
Start Date: 1 YR +
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design Engineer III

Description:
Location: Savannah, GA
Rate: $60.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
Must be proficient with Catia V5

Other Requirements:
1. Must possess excellent CAD/CATIA modeling skills, have a strong understanding of GD&T.
2. Demonstrated knowledge of materials, material strengths, and heat treat methods and uses.
3. Ability to conceptualize the following with little or no supervision.
4. Assembly tooling, Composite tooling, Machine tooling, handling equipment, and scaffolding.

Education and Experience Requirements:
Bachelor's Degree in Mechanical Engineering, a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Four (4) years drafting/design experience to include documented experience in a tool or machine shop environment. Tool Design experience required.

Position Purpose:
Performs engineering work related to the design of complex tools and equipment used in the manufacture and support of our client's aircraft.

Principle Duties and Responsibilities:
Essential Functions:
1. Under minimal supervision, design, tolerance and annotate tooling in 3D CAD environment that will be used in the manufacture and support of our clients aircraft.
2. Collaborate with engineering, manufacturing engineering and operations to determine optimal manufacturing procedures.
3. Present design concepts to a design review team composed of representatives from manufacturing engineering, industrial engineering, operations, safety and other Tool Design Engineers.
4. Review and check Tool Designs, as required, to ensure conformance to specifications, intent, methods and procedures.
5. Write complex procedures on use of tools.
6. May act as Team Leader, assigning work tasks, maintaining work load schedules, and setting priorities to ensure timely completion of department goals and corporate objectives.

Additional Functions:
1. Actively works to improve daily processes, and ensures all work meets customer requirements.
2. Assist Tool shop as needed, during Periodic and Conformity Inspections.
3. Assist in formulating Tool Design policies, procedures, and specifications as required.
4. Perform other duties as assigned.
 
Job Number: 9943
Job Location: Savannah, GA
Rate: $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design Engineer III

Description:
Location: Savannah, GA
Rate: $60.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
Must be proficient with Catia V5

Other Requirements:
1. Must possess excellent CAD/CATIA modeling skills, have a strong understanding of GD&T.
2. Demonstrated knowledge of materials, material strengths, and heat treat methods and uses.
3. Ability to conceptualize the following with little or no supervision.
4. Assembly tooling, Composite tooling, Machine tooling, handling equipment, and scaffolding.

Education and Experience Requirements:
Bachelor's Degree in Mechanical Engineering, a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Four (4) years drafting/design experience to include documented experience in a tool or machine shop environment. Tool Design experience required.

Position Purpose:
Performs engineering work related to the design of complex tools and equipment used in the manufacture and support of our client's aircraft.

Principle Duties and Responsibilities:
Essential Functions:
1. Under minimal supervision, design, tolerance and annotate tooling in 3D CAD environment that will be used in the manufacture and support of our clients aircraft.
2. Collaborate with engineering, manufacturing engineering and operations to determine optimal manufacturing procedures.
3. Present design concepts to a design review team composed of representatives from manufacturing engineering, industrial engineering, operations, safety and other Tool Design Engineers.
4. Review and check Tool Designs, as required, to ensure conformance to specifications, intent, methods and procedures.
5. Write complex procedures on use of tools.
6. May act as Team Leader, assigning work tasks, maintaining work load schedules, and setting priorities to ensure timely completion of department goals and corporate objectives.

Additional Functions:
1. Actively works to improve daily processes, and ensures all work meets customer requirements.
2. Assist Tool shop as needed, during Periodic and Conformity Inspections.
3. Assist in formulating Tool Design policies, procedures, and specifications as required.
4. Perform other duties as assigned.
 
Job Number: 9944
Job Location: Savannah, GA
Rate: $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Designer

Description:
Tool Designer performs engineering work related to the design of complex tools and equipment used in the manufacture and support of company aircraft.

Principle Duties and Responsibilities:

Tool Designer under minimal supervision, design, tolerance and annotate tooling in 3D CAD environment that will be used in the manufacture and support of company aircraft. 2. Collaborate with engineering, manufacturing engineering and operations to determine optimal manufacturing procedures. 3. Present design concepts to a design review team composed of representatives from manufacturing engineering, industrial engineering, operations, safety and other Tool Design Engineers. 4. Review and check Tool Designs, as required, to ensure conformance to specifications, intent, methods and procedures. 5. Write complex procedures on use of tools. 6. May act as Team Leader, assigning work tasks, maintaining work load schedules, and setting priorities to ensure timely completion of department goals and corporate objectives. 

Tool Designer actively works to improve daily processes, and ensures all work meets customer requirements. 2. Assist Tool shop as needed, during Periodic and Conformity Inspections. 3. Assist in formulating Tool Design policies, procedures, and specifications as required. Perform other duties as assigned.

Tool Designer must possess excellent CAD/CATIA modeling skills, have a strong understanding of GD&T. 2. Demonstrated knowledge of materials, material strengths, heat treat method and uses. 3. Ability to conceptualize the following with little or no supervision. Assembly tooling, Composite tooling, Machine tooling, handling equipment, and scaffolding. Must be proficient with Catia V5

Education and Experience Requirements:

Bachelor's Degree in Mechanical Engineering, a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Four (4) years drafting/design experience to include documented experience in a tool or machine shop environment. Tool Design experience required.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tooling Engineer ( Clearfield , Utah ) 8853608

Description:
Tooling Engineer ( Clearfield , Utah ) 8853608
12 Month Contract

Tool Engineer to work in a composite aircraft and rocket motor fabrication environment, at the Clearfield, Utah location:

Responsibilities:
• Concept and design of special tooling within an Integrated Product Team structure
• Project management of vendor and CAD resources for design and fabrication of individual rocket motor and aircraft tools
• Use and/or manages Computer Aided Design (CAD) resources for tooling design
• Work with vendors to ensure successful fabrication of tooling
• Witnesses source inspection of special tooling at fabrication locations
• Proof tooling upon receipt
• Maintain tooling documentation related to design, fabrication and proofing
• Provide engineering disposition of damaged and discrepant tooling and oversee return to production
• Provides tooling estimates for new tools

Education and Experience Requirements:
• BS in Mechanical, Civil or Aerospace Engineering, or related field plus a minimum of internship experience.

Screening Criteria:
• Experience with design of mechanical and structural elements
• Experience with design, fabrication and installation of tooling for rocket motor and/or aircraft composite parts preferred
• Experience with general metallic fabrication including welding, machining, and forming.
• Understanding of 3D CAD systems (CATIA V5, NX) preferred
 
Job Number: 8853608
Job Location: Clearfield, UT
Rate: open
Per Diem: no
Overtime: yes
Duration: 12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Traveling Field Service Representatives

Description:
STS Technical Services is hiring Traveling Field Service Representatives to join the largest military vehicle upgrade project in US history, the Joint Light Tactical Vehicle- JLTV!

You will be trained in Oshkosh, WI and then be deployed to several site locations all over the United States and abroad.

Overall, C4I personnel will integrate: turret drive systems, DVE, DAGR, LRAS, VSWR Antenna, KVG-72, VRC 104 – 114, VRC-9x, VIC.

This is a tremendous opportunity to work for a company that holds industry leading standards for defense and also is on the leading edge of an industry boom. There is only one place you will gain the training you need on the JLTV and this is the job to do it.

Essential Duties and Responsibilities:

Provide field support to military customers within assigned regions
Travel as required, up to 100% annually
The ability to travel consistently is a high requirement for this position
Hardware and software hands-on subject matter expertise in the areas of GFE and OSK CFE systems that include weapons, shelters, and C4ISR/EW (incl. COMSEC, sensors, JBC-P software, GFE firmware/configuration)
Installation, de-installation, configuration, operation, and verification of GFE and OSK CFE systems to demonstrate operational readiness (IAW the JPO prove-out process)
Independently perform troubleshooting to identify and resolve technical issues of JLTV CFE and GFE OSK installation kits
Provide specialized tools necessary to perform the duties (OSK laptops with full CAD data (incl. wiring diagrams), antenna VSWR meter, amplifier power meter, and cable analyzer)
Operate JPO provided hard drive duplicator to perform CSDU HD cloning
Provide status updates to Government site lead as directed
Document and track vehicle (incl. CFE and GFE kit) status and issues

Qualifications:

CompTIA Sec+ certification (Mandatory)
Army MOS 25U or other service branch equivalent (covers all radio experience and training)
Adjudicated Secret Clearance
Physical ability to work in field conditions indefinitely
Electronically controlled electrical system experience preferred
Strong schematic experience
Electrical diagnostic experience
CAD model operator experience

We know it takes great people to do great work, so if you’re interested in joining the STS Technical Services family, we encourage you to apply on this page. Have questions? Give us a call at 1-800-359-4787.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 45021
Job Location: Oshkosh, WI
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: Recruiting Department
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

Back to Advanced Job Search