Job Search Results

415 listings were found that matched your search words: Keywords: Aerospace ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2024/03/28 Thursday 06:02AM Pacific Time by ContractJobHunter. )

Listings 1 - 415

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2581 - RELIABILITY, MAINTAINABILITY & SAFETY ENGINEER - cv, word doc only

Description:
Prepare reliability & safety studies, Failure Modes and Effects Analysis (FMEA), Aircraft Functional Hazard Analysis, Fault Tree Analysis and System Safety Analysis to certify modifications to the Challenger aircraft systems.

Participate in internal and external Design Reviews with Partners/Suppliers. You will be responsible for reviewing Partner%u2019s/Supplier%u2019s reports and ensure reliability & safety requirements are met.

Interface with various (Design Authorized Delegate) DAD disciplines Systems Engineering, Flight Sciences as part of the Integrated Design Team.

Interface with other internal and external customers (e.g. Airworthiness, Product Support, Marketing, Partners, and Certification Authorities).

Be involved with the maintenance engineering group to evaluate potential changes to certified maintenance tasks in conjunction with the DAD.

Evaluate potential modification/creation of Master Minimum Equipment List (MMEL) items with Transport Canada Civil Aviation (TCCA) and Federal Aviation Administration (FAA).

Prepare and present risk assessments for continued airworthiness queries.

Have at least 15 years of experience in the field of aircraft reliability/safety and in particular the following:

Creating and reviewing System safety assessments that meet the requirements of ARP4761.

Experience in evaluating in-service issues which are subject to safety.

Review and propose different certified maintenance task intervals for previously certified systems.

Experience with Continued Airworthiness Risk Assessments (CAA).

Experience in creating and proposing changes to the MMEL for TCCA and FAA.

Have experience in applied aerospace reliability engineering for mechanical and electrical components including reliability prediction.

Have completed various types of aircraft level assessments such as Particular risk analysis (rotor burst, tire burst) and zonal analysis.

Experience with ARP4754 is considered an asset.

Must be familiar with common reliability and safety processes and tools to perform the above mentioned tasks (e.g. Reliasoft, CAFTA.).

Experience with civil aircraft and civil airworthiness regulations is mandatory (TCCA, FAA, EASA).

Excellent comprehension and applied skills with FAR/JAR 25.1309 and all associated guidance material.

Good writing skills and communication skills in English is essential for the position.

Must possess the ability to work with minimum supervision and be a team player.

Must also be a person with initiative, a strong sense of responsibility and good engineering judgment.
 
Job Number: 2581
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2587 - HYDRO-MECHANICAL ENGINEER - CV in 'word doc - only'

Description:
Have a Bachelor or Master's (preferred) degree in Mechanical or Aerospace Engineering with minimum 8 years of working experience.

Have a background in design, integration, development and certification of Hydro-Mechanical Systems.

Are cognizant of the relevant Airworthiness Regulations and certification process.

Have good oral and technical writing skills in English (required).

Technical experience on the CRJ or Challenger family of aircraft is an asset.

Must have knowledge of flight-control, landing gears or hydraulic systems.

You manage various projects under strict budget and schedule requirements.

You are able to manage conflicts and solve problems.

You are self-starter, enthusiastic, well organized and customer oriented.

Must have good troubleshooting and problem resolution skills.

Must be proficient in MS Office software applications in windows (word, excel, powerpoint).

You have a background in design, integration, development and certification of Control Systems.

Are motivated, self-starter, organized, autonomous and able to work under limited supervision.

Are a team player and able to work with suppliers and customers.

Are a dynamic person with initiative, a strong sense of responsibility and good judgment.

Have knowledge of MS Office software (essential).

Have knowledge of CATIA, Matlab, Simulink (an asset).

FUNCTIONS

Take part in the integration of the flight control, hydraulic and/or landing gear system for the definition, specification, design, analysis, modification, test and certification of hydro-mechanical systems.

Coordinate product development activities between the supplier of the system and the affected work packages.

Ensure successful design, validation, certification and delivery of the system.

Ensure successful completion of each development phase deliverables (may author, review, approve).

Problem solve the technical issues in a cross functional environment.

Be involved in the design and integration of the system.

Review the design and documentation of all the aspects related to your system.

Check for quality of the Supplier's analyses.

Validate and verify system requirements as well as system performance through design reviews, analyses, rig and aircraft testing.

Define, prepare and execute qualification and certification tests.

Work with supplier in the investigation and resolution of test findings.

Prepare or review qualification or certification reports.

Liaise with stress, loads, reliability, maintainability and safety (RM&S), simulation, customer and operations support departments.

Identify issues and obstacles, follow-up and communicate progress.

Prepare reports or presentations.
 
Job Number: 2587
Job Location: Canada
Rate: 54 USD
Per Diem: Paid - 3mt
Overtime: Paid - NOT at 1.5X
Duration: 12 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2590 - PROJECT ENGINEER - CV in 'word doc - only'

Description:
Have minimum of 10 years%u2019 experience in project management in the aerospace, transportation or other field where you have taken on increasing level of responsibilities and demonstrate the ability to handle more complex projects.

Training or Bachelor's degree in Project Management, Engineering, or relevant experience in the aeronautical / transportation fields.

Have an extensive management and supervisory experience that will differentiate you from other candidates and make you a prime candidate for this position.

Have a Project Management Professional (PMP) Certification from the Project Management Institute (PMI).
Exceptional relational and editorial skills in English and French.

Are familiar with Microsoft Office software such as PowerPoint, Excel and MS Project.

FUNCTION

Have experience in leading and driving engineering and fabrication activities for internal resources as well as third party Engineering service suppliers.

Leadership, ability to have a strategic perspective with a global vision.

Strong organizational, interpersonal, time management and communication skills.

Be autonomous and a critical thinker in order to take the right decisions.

Be confident and have experience in multidisciplinary team coordination.

Ability to assign tasks effectively and then follow up with thoroughness and rigor.

Be a team motivator, collaborator and promote the valorization and respect of others.

Have resilience, openness to change and manage stress positively.

Have good cost and contract management skills.
 
Job Number: 2590
Job Location: Canada
Rate: 56 USD
Per Diem: Paid - 3mt
Overtime: Paid - NOT at 1.5X
Duration: 12 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2592 - PROJECT MANAGER - cv, work doc only

Description:
Evaluate and propose state-of-the-art technology acquisition opportunities for the machining, sheet metal, composite and assembly sectors, enabling the organization to achieve technological excellence.

Evaluate, participate and manage continuous improvement initiatives required to manufacture air crafts.

Define strategy for achieving projects goals: content, scope of work, resources, time, costs, risks, quality management, communications and training.

Manage activities during projects development phases: feasibility study, project and business plan, acquisition, implementation and commissioning.

Manage budget, schedule and resources in every project phase. Prepare and present progress status at different management levels.

Align resources involved in project and be the interface between the various services.

Manage customer expectations and change requests within projects.

Elaborate risk management matrix and mitigation plans.

Participate in problem solving initiative, and follows recovery plans in order meet deadlines for key deliverables.

Participate in the continuous improvement of our project management processes.

Bachelor's degree in Mechanical Engineering, Aeronautical Engineering, Automated Production Engineering or Industrial Engineering, or any other relevant experience.

Minimum of five (5) to ten (10) years of experience in project management.

Knowledge in the manufacturing processes of the aerospace industry (Asset).

Have strengths in human resource management as part of matrix project management.

Have a PMI certification (asset).

Have good analytical skills.

Excellent verbal and written communication skills and a strong sense of organization.

Passionate about achieving technological excellence.

Fluent in English and French both written and spoken.

Knowledge of Microsoft Office such as Excel, PowerPoint and MSProject.
 
Job Number: 2592
Job Location: Montreal, Canada
Rate: 52.00
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2603 - PROJECT MANAGEMENT - cv, word doc only

Description:
Evaluate, participate and manage continuous improvement initiatives required to manufacture aircrafts & methods processes.

Define strategy for achieving projects goals: content, scope of work, resources, time, costs, risks, quality management, communications and training.

Manage activities during projects development phases: feasibility study, project and business plan, implementation and commissioning.

Manage the budget, the schedule and the resources in every project phases. Prepare and present progress status at different management levels.

Align resources involved in project and be the intermediary between the various services.

Manage customer expectations and change requests within projects.

Elaborate risk management matrix and mitigation plans.

Participate in problem solving initiative, and follows recovery plans in order meet deadlines for key deliverables.

Participate in the continuous improvement of our project management processes.

Bachelor's degree in Mechanical Engineering, Aeronautical Engineering, Automated Production Engineering or Industrial Engineering, or any other relevant experience.

A minimum of five (5) to ten (10) years of experience in project management.

Knowledge in the manufacturing processes of the aerospace industry (Asset).

Possess strengths in human resource management as part of matrix project management.

PMI certification (asset).

Good analytical skills.

Excellent verbal and written communication skills and a strong sense of organization.

Be passionate about achieving technological excellence.

Fluent in English and French both written and spoken.

Knowledge of Microsoft Office such as Excel, PowerPoint and MSProject.
 
Job Number: 2603
Job Location: Canada
Rate: 53.00 US
Per Diem: Paid - only 3 mths
Overtime: Paid - NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2604 - LIAISON ENGINEER (MRB) - cv, word doc only

Description:
Disposition documentation to resolve fit, form or functional issues on A/C components and Interiors.

Support to Production, Design Engineering, Procurement, Methods and Quality in coordinating resolutions to
issues.

Review & trouble shooting of all Aircraft Systems in conjunction with Design Engineering as required.

Review & disposition of A/C Interior issues in conjunction with Design Engineering as required.

Review & prepare disposition on Green Aircraft issues and Create Repair Engineering Orders, as required.

Obtain & Interface with Design Engineering experts on appropriate issue resolution.

Provide status, updates & keep current on information regarding manufacturing changes & problems.

Support production and Methods as required.

Formal education to degree level in mechanical/aerospace engineering or related field, coupled with a minimum
of one year MRB experience or three years design experience in a Mechanical or an Aerospace environment /
College degree in mechanical/aerospace engineering or related field, coupled with a minimum of three year
MRB experience or five years design experience in a Mechanical or an Aerospace environment

Requires good organizational, communication and interpersonal skills and command of the English language.

Must have a good knowledge of aircraft structure & system installation technical requirements.

Interior completion and Electrical & Systems experience would be an asset.

Requires an energetic person with a high sense of commitment, and willing to accept responsibilities while acting independently in a high-pressure partner/supplier team environment.

Position is for second shift and/or weekend work requirements.

Previous CATIA, Design and MRB experience including support to production would be an asset.

***PLEASE NOTE: 3 day shift ; 2 Evening shift; 2 night Shift; 1 Weekend shift***
 
Job Number: 2604
Job Location: Canada
Rate: 56.00 US
Per Diem: Paid - 3 Mths only
Overtime: Paid - NOT at 1.5
Duration: 6+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2605 - ENGINEERING PROFESSIONAL - ANDON - cv, word doc only

Description:
Review and approve change request pertaining to installation design activities.

Translate and apply design requirements into comprehensive design packages that meet Bombardier design practices and airworthiness regulatory requirements.

Required to provide estimates and statements of work for design related activities.

Assist in design review presentations and technical investigations.

Will also be asked to support suppliers, production and final line installations.

Produce detail and installation drawings of cabinet installation and systems installations.

Engineering degree in Aerospace or Mechanical Engineering or a Technical diploma with 3-5 years of related experience.

Knowledge of CATIA V5 is required.

Bilingual in English and French.

This position will require good integration skills when dealing with multi-discipline engineering groups and partners.

1 position day shift, 3 positions evening shift, 2 positions weekend shift, 2 positions night shift.

Knowledge of Catia V5 is required.

Previous experience with Global 7500 is a definite asset.

This position will require good integration skill when dealing with multi-discipline engineering groups and partners.

Support and define aircraft schedules is required.

Comfortable in unionized context.

Experience working in a Manufacturing environment in the aerospace industry is an asset.

An understanding of aerospace product certification is an asset.

Must have excellent negotiation, troubleshooting and problem solving skills.
 
Job Number: 2605
Job Location: Canada
Rate: 48.00 US
Per Diem: Paid - 3 Mths only
Overtime: Paid - NOT at 1.5
Duration: 6+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2606 - Designer - Paint & Placards - Detailed Engineering - cv, word doc only

Description:
Produce interior completion datasets (detail, assembly and installation), 3D models and 2D drawings.

Produce macros and / or parameterize models to lighten repetitive design work.

Closely communicates with supporting functions such as Methods, Operations, Customer Support, Interior
Design, Stress, Materials and Processes and Weight and Balance.

Support requests for modifications during manufacturing.

Support integrators during conceptual phase.

Bachelor's degree in mechanical/Aerospace engineering.

Experience working with Enovia/VPM Nav and Catia V5

Are well organized and focused on projects.

Good oral and written communication skills in French and English is required.

Collaborate in a multidisciplinary team, you adapt easily to changes.

Ability to understand complex engineering issues and are innovative in problem solving.

Must be a team worker, able to work under pressure and under a minimum of supervision.

Experience in Aerospace is an asset.

Leadership is required.

Macro development is an asset.
 
Job Number: 2606
Job Location: Canada
Rate: 51.00 US
Per Diem: Paid - 3 Mths only
Overtime: Paid - NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2609 - MECHANICAL SYSTEMS INTEGRATION COMPLETION - PRODUCTION SUPPORT - cv, word doc only

Description:
Act as the technical specialist for the systems

Receive, analyze and define solutions to meet customer and operation needs.

Collaborate with different internal parties (Operations, Detailed Design, Projects, Programs, Technical, etc.) as well as suppliers on daily basis.

Lead problem resolution by identifying the right stakeholders, establishing options, collecting facts, reaching alignment on the recommendation and bringing the recommendation for decision.

Produce and Review technical deliverables and datasets (3D models and 2D drawings) and ensure that they meet technical and Client requirements.

Be in direct contact with suppliers and be responsible for the delivery of quality engineering documentation that meets Client Standards.

Identify technical impacts and lead production line support change management processes.

College or University mechanical or aerospace engineering degree or equivalent with a minimum of five (5) to eight (8) years of relevant experience and technical advisor experience would be an asset.

Have technical experience in interior completion on Client Platform and knowledge of requirements for aircraft systems and interiors.

Understanding of product structure and aircraft configuration.

Have experience in working with Enovia / Enovia PLM

Ability to understand complex engineering issues and are innovative in problem solving.

Are well organized and are project oriented.

Must be a self-motivated person, a team player able to work under pressure and under a minimum of supervision.

Good communication skills including good English writing skills, and good English and French verbal skills.

Demonstrate an excellent track record of meeting your commitments with success.

Bilingualism (French and English) is an asset.

1 day shift ; 1 Evening shift; 1 night Shift.
 
Job Number: 2609
Job Location: Canada
Rate: 57.00 US
Per Diem: Paid - 3 Mths only
Overtime: Paid - NOT at 1.5
Duration: 6+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2610 - MATERIALS & PROCESSES ENGINEER - cv, word doc only

Description:
Support the Engineering, Production and Quality organizations.

Assess various metallic, composite and completion finishing materials (Wood Veneer, Fabric, Leather, etc.).

Engage in engineering development work.

Sign engineering drawings and documentations.

Prepare Test Plans and approve Test Reports (including flammability).

Perform Trade and Design Studies.

Support various research and development projects.

Act as M&P expert.

Create, improve and adapt technical and functional processes.

Take on strategic projects management.

Plan, execute audits, prepare reports and follow up on corrective actions.

Analyze process and systems changes.

University degree in metallurgical, chemical or materials engineering with at least 3 years of pertinent experience (relevant experience in aerospace field is an asset)

Are familiar with the materials used in aerospace industry and the manufacturing and application procedures.

Are familiar with the typical military standards or the aerospace industry standards (e.g.: MIL, SAE specifications, FAA requirements, etc).

Have knowledge of the aluminum, composite and aircraft completion finishing materials characteristics as well as their treatment.

Have practical knowledge and experience of Catia/Enovia V5.

Work under minimum supervision to perform a wide range of technical functions.

Have practical knowledge and experience in aircraft structure and completion components.
 
Job Number: 2610
Job Location: Canada
Rate: 53.00 US
Per Diem: Paid - 3 Mths only
Overtime: Paid - NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
3 Aircraft Stress Engineers with Composites

Description:
3 Aircraft Composite Stress Engineers Needed.
Require 10+ years of aircraft/aerospace stress analysis with a good composites background.
Previous FEMAP experience is a plus.
Composite airframe analysis experience a MUST.
MUST be US Persons

Qualifications:
-Experience in aircraft or spacecraft composite, design and analysis processes
-Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures
-Minimum 10 years or more of applicable experience in the analysis of structural systems using strength of materials and finite element based methods
-Experience with free-body diagrams and classical stress analysis techniques
-Experience with FEMAP
-Rapid prototyping experience a strong plus
-Excellent computer skills, including Outlook, Word, Excel and PowerPoint
-Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
-Applicants must be U.S. persons as defined by ITAR
Educational Requirements-
Bachelors degree from an accredited institution, with a concentration in a relevant Engineering discipline

The Structures Company is an AA/EOE.
 
Job Location: Mojave, CA
Rate: $80-85/hr DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Last Updated: 01/04/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Advanced Digital Signal Processing (DSP) Systems Engineer

Description:
An Advanced Digital Signal Processing Systems Engineer job in Scottsdale, AZ is currently available through Belcan. In this role, you will be responsible for analyzing, designing, developing, and testing DSP algorithms that are implemented in hardware and software for Space-Based systems. To be considered for this role, you will have a Bachelor's degree in Systems Engineering, or a related specialized area or field, plus a minimum of 5 years of relevant experience. Due to the nature of the work performed in this facility, US citizenship is required.

Advanced Digital Signal Processing Systems Engineer Job duties:

* Systems requirements analysis.
* Algorithm development.
* Fixed point model conversion for hardware implementation.
* Signal processing architecture.
* Hands-on system performance verification and validation in the lab.

Qualifications:

* Bachelor of Science degree in Systems Engineering, a related specialized area or field, plus a minimum of 5 years of relevant experience.
* Experience of algorithm development for the statistical analysis of signal parameter measurements utilizing techniques from Detection & Estimation Theory, Random Processes Analysis, and Communications and Information Theory.
* Candidates must also have knowledge of MATLAB for DSP using the related tool boxes.
* Background with Radar Processing, DSP for mitigating/processing RF effects, Monte Carlo analysis or Phased Array/Beam Forming is a plus.

If you are interested in this Advanced Digital Signal Processing Systems Engineer job in Scottsdale, AZ, please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.
 
Job Number: 298620
Job Location: Scottsdale, AZ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Firm Name: BELCAN TECHSERVICES
Attention: JessicaBraddy
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Advanced Systems Engineer

Description:
An Advanced Systems Engineer job in Fairfax, VA is currently available through Belcan. In this role, you will be responsible for supporting the RF design, development, requirements validation and execution of the Air and Missile Defense Radar (AMDR) program. To be considered for this role, you will have a Bachelor's degree in Systems Engineering or a related discipline, plus a minimum of 5 years of relevant experience. A current active department of defense Secret security clearance is required at the time of hire.

Advanced Systems Engineer Job duties:

* Performing mission, functional, cost-benefit and risk analysis; making recommendations on systems architectures.
* Documents security on new and fielded systems and provide accreditation/certification evaluation and test support to ensure all technical security features are considered and functioning properly.
* Lead program/project efforts by directing and monitoring task completion.
* Deliver innovative, flexible, integrated solutions to meet customers changing business needs.

Qualifications:

* A passion for innovation, along with a sophisticated understanding of various engineering systems.
* 5+ years performing RF/Radar systems engineering for a large DoD component contract with multiple subcontracts, experience with US Navy programs preferred.
* Solid knowledge of requirements management and system modeling tools (MATLAB).
* Desire to learn and push the envelope, willingness to take on strong challenges.
* An existing Department of Defense SECRET security clearance.

If you are interested in this Advanced Systems Engineer job in Fairfax, VA, please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

 
Job Number: 298350
Job Location: Fairfax, VA
Rate: --
Per Diem: --
Overtime: --
Duration: JOB-CONTRACT_TYPE
Start Date: --
Input Date: 11/14/2020
Firm Name: BELCAN TECHSERVICES
Attention: AngelaLoza
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineer - Air Systems

Description:
We are currently looking for an experienced Air System Engineer to fill an opening with an aerospace company in Renton, WA. Interested candidate should have strong knowledge of flight test operations and flight certification, including a familiarity with aircraft cabin temperature controls, low pressure cabin air distribution, avionics cooling, cabin pressurization, fire protection and anti-ice systems.

Responsibilities of the Air Systems Engineer
Support Flight Testing Activities, including reviewing test plans and preparation activities.
Help determine test specifications (based upon system architecture).
Attend Ground/Flight Test briefing and debriefings.
Participate in Test Readiness Reviews and ensure on-time engineering deliverables.
Generate developmental engineering drawings and instrumentation change requests as required.
Monitor live flight data, typically via telemetry, during flight test on aircraft.
Create and review Aircraft Restrictions and Aircraft Troubleshooting.
Coordinate with suppliers to review technical data, certification requirements and troubleshoot any issues with supplies.
Process, analyze, and draw conclusions from post flight data.
Identify non-conformances, quality escapes, etc. to create rejection tags.
Document flight test design problems for long term fix.
Generate and review appropriate limitations documentation.
Write flight test results reports.

Requirements
Four (4) years aerospace engineering experience in air systems, including experience in aircraft cabin temperature controls, low pressure cabin air distribution, avionics cooling, cabin pressurization, fire protection and anti-ice systems.
Four (4) year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation).
Solid leadership skills as well as people management skills.
Strong analytical skills, with an ability to troubleshoot, problem-solve and effectively and efficiently make decisions.
Excellent communication skills (oral, written, presentation) with both external and internal team.
Good project management skills, including the ability to take ownership for accomplishing assigned tasks. Results-oriented planner and delegator who ensures that goals are met. Able to set priorities and keep to projected schedules.
Comfortable and effective working in Microsoft Office and the ability to quickly learn new software and systems.
 
Job Location: Renton, WA
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Process and Tools Lead

Description:
We are seeking an accomplished leader with Configuration Management, Product Change Management, Process and Tool development experience to fill and opening for an aerospace company in Nagoya, Japan. Interested candidates should have 15 plus years of aerospace engineering and at least 5 years of process and tool experience along with a relevant leadership background.

Responsibilities of the Aerospace Process & Tools Lead
Lead the development and deployment of world leading, efficient engineering processes and tools that can be integrated seamlessly in to the company business framework.
Define the process and tools development road map which includes both short term process adjustments and long term process consolidation and optimization.
Provide direction for product change management, configuration management, data release, process development, Product Life Cycle Management (PLM) development and deployment.
Support engineering in achieving program milestones and certification schedules.
Identify, manage and mitigate risks for critical path activities.
Develop and meet budget & resource plans within the schedules.

Requirements
15 plus years in aerospace engineering of which 5-10 years involve aerospace process and tools management.
​Minimum Bachelor’s degree, plus MBA, PMP or other certifications from accredited institutions preferred.
Previous successful leadership experience.
Relevant configuration management, product change management, process & tool development and deployment experience.
Excellent verbal and written communication skills in English.
 
Job Location: Japan
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Andrew Bondy
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Stress Engineer Openings

Description:
Aircraft Stress Engineers needed.
MUST BE US PERSONS.
BS Degree a MUST.
FEMAP is a plus but not required.
Strong classical analysis/hand calcs a MUST.

REQUIRED SKILLS AND ABILITIES:
1. Familiarity with Federal Aviation Regulations (FARs) governing aircraft certification.
2. Strong understanding of aircraft structural modifications (both interior and airframe).
3. Strong command of classical hand-analysis techniques.
4. Proficient with the following software:
a. Microsoft Word, Excel, PowerPoint, Outlook, and Internet Explorer.
b. NASTRAN/FEMAP(basic user skill, proficiency a plus)
c. AutoCAD (basic user skill, proficiency a plus)
d. SolidWorks (basic user skill, proficiency a plus)
e. Visual Basic or other coding skills a plus
Final 1-2017
5. Strong knowledge of Finite Element Modeling and Analysis techniques.
6. Ability to interpret design drawings of various aircraft modifications and identify design changes required to
ensure that sound load paths and structural integrity are maintained.

MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
1. Bachelor’s Degree in Aerospace, Aeronautical, or Mechanical Engineering or the equivalent.
2. Five (5) or more years of experience working in aircraft stress analysis - airframe or interiors/completions on transport category aircraft, installation designs, including but not limited to Supplemental Type Certificate (STC) work, structural
substantiation analysis and report development, aircraft modification designs under 14 CFR Part 25 STC
projects, and test plans and test report authoring and review.

The Structures Company LLC is an AA/EOE.
 
Job Location: IN
Rate: Open / DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airframe Design Engineer

Description:
Airframe Design Engineer (H1) $100-$110K Base

Morson International is currently recruiting for Airframe Design Engineers for a fantastic opportunity in the Fort Worth area in TX, this is a great opening for Airframe Design Engineers to join a global company and work on some of the latest designs in the aviation industry, specifically Helicopters.
Must have good experience in designing primary and secondary airframe structures.
1. Airframe Design Engineer (H1)
Position Responsibilities:
 Create detail, assembly, and installation airframe 3D models, 2D drawings and engineering bill of materials
 Assignments will involve detail design under the supervision of a technical lead
 Assist in researching pertinent data and developing solutions for the project or assignment
 Coordinate with other engineering, manufacturing or specialty personnel to resolve problems, including execution to program schedule and cost requirements
 Provide Manufacturing Engineering support during fabrication and assembly of components
Qualifications:
 Bachelor’s Degree in Engineering is preferred.
Position Requirements:
 Proficiency with aerospace design requirements verification.
 Proficiency with general part sizing and familiarity with GD&T.
 PC proficiency in Microsoft Word, Excel, PowerPoint, and Outlook.
 Excellent organizational, interpersonal, and communication skills (both verbal and written)
 Experience working with composite material
Position Qualifications:
 Experience at all levels will be considered with a minimum of 2 years related experience.  Proficiency in CATIA V5, V6.
 Familiarity with Planning, Manufacturing, Procurement and Maintenance processes.
 Experience with ENOVIA.  Airframe design experience
 Sheet metal work, machining, casting or forging.
 
Job Location: Fort Worth, TX
Rate: $45-50/hour
Input Date: 11/14/2020
Firm Name: MORSON INTERNATIONAL
Attention: Philip Power
Address: 10800 GOSLING RD BOX 131565
City, State: SPRING, TX 77393
Phone: 713/636-2532
Fax Phone: 713/636-2523
Website: www.morsonusa.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airframe Process Engineer

Description:
The Airframe Process Engineer is required for 2nd, or possible split shift (late 1st to 2nd, flexible hours) to complete tasks as related to AeroStructures in Support of Black Hawk Major Assembly build, tooling, liaison, and planning.

The candidate’s responsibilities will include supporting a Process Engineer Lead assigned to existing Black Hawk programs.

Primary responsibilities include Manufacturing Engineering support of Black Hawk build and designs by providing producibility review, work instruction planning, developing tooling and manufacturing plans, and manufacturing implementation and support of airframe installation and modifications.

Also, the candidate must review, sign off, create, and implement PCAS for EC changes, issue SAP notifications to create new tooling, and perform process validations.

The candidate must pro-actively coordinate with Design Engineering and other disciplines and actively engage in continuous quality improvement through the use of other ACE tools.

The candidate must be flexible and highly motivated with a proven technical ability and business judgment with the ability to work on multiple programs. There is a potential for overtime between 5 and 10 hours dependent upon Operations scheduling and applicants experience.

This position reports to Process Engineering Black Hawk Lead

This position is seeking a highly motivated, flexible individual with proven technical abilities and business judgment.

Requirements
• BS in Mechanical Engineering, Aerospace or Manufacturing Engineering
• Five (5+) years of Airframe Process Engineering
• Proficiency in all processes associated with Airframe Process Engineering.
• Proficiency in Solumina, Matrix, Microsoft Programs, CATIA, CADRA, and SAP is mandatory.
• Candidate must be flexible in regard to work schedule and willing to support weekends.
• Good communication skills
 
Job Number: 2010114361
Job Location: Bridgeport, CT
Per Diem: split
Overtime: possible
Duration: 1.5 years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Application Sales Engineer

Description:
An Application Sales Engineer job is available in Anderson, IN for a local manufacturing client. In this role, you will be asked to develop an expert level of knowledge of our client's product to provide a high level of customer service/sales that includes proposal development, technical support and business development. This is a contract-to-hire opportunity.

Application Sales Engineer Job Responsibilities:
- Develop customer technical proposals and technical responses to RFIs/RFPs - including but not limited to conceptual one-line diagrams, cut-sheets, product descriptions, scope, delivery timelines, etc.
- Provide technical support on an on-going basis to the sales and business development team.
- Effectively communicate products and services through proposals and presentations.
- Continually analyze customer needs to effectively design solutions

Requirements:

- B.S. Degree in an Engineering discipline
- Minimum five years of experience in assisting technical sales
- Proficient in MATLAB or similar software that can analyze large amounts of data
- Proven ability to deliver proposals and technical documents in a timely manner, with a strict eye on detail and presentation


If you are interested in this Application Sales Engineer job in Anderson, IN please apply via the 'apply now' link provided.

Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.
 
Job Number: 299117
Job Location: Anderson, IN
Rate: --
Per Diem: --
Overtime: --
Duration: JOB-CONTRACT_TYPE
Start Date: --
Input Date: 11/14/2020
Firm Name: BELCAN TECHSERVICES
Attention: CaseyBrown
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembly and Test Technician - 2nd shift CA

Description:
Job title: Assembly and Test Technician
Request number: 6327
Number of openings: 1
Job type: Light Industrial
Position location: Torrance - CA
Employment type: Contract
OT exempt: No
Shift: 2nd
Education Requirement: High School Diploma
Driving on company time?: No
Minimum Years of Experience: 1
Maximum Hourly Pay Rate: 20
Start Date: 03/16/2020
Tentative End Date: 03/15/2021

Function:
Performs precision assembly on complex production and repair actuators. Adjusts or aligns through shimming and other means of mechanical adjustments specified by blueprint or other specification limits. Utilizes a variety of mechanical measuring equipment such as: Dial Indicators, Calipers, and Micrometers to obtain proper assembly-build requirements. Maintain dimensional accuracy on assemblies utilizing torque wrenches, fixtures, tooling, gauges, and other measuring devices. Required to work from assembly instructions both written and oral.

Education:
High School Diploma or GED. Preferred to have trade certificate from Aerospace Trade School

Other Requirements:
Manager looking for strong mechanical aptitude. Graduates from Crimson (Trade School in Southern, CA) a HUGE PLUS. They groom students to do exactly what this job entails.
 
Job Number: MB-6327
Job Location: Torrance, CA
Rate: 20/hr max
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Associate Industrial Engineer - no clearance FL

Description:
167097 Associate Industrial Engineer (Job Number: 19036382)
Number of Openings: 2
Location(s): United States-Florida-Melbourne

Shift: 1st Shift
Target Start Date: Apr 6, 2020
Target End Date: Apr 2, 2021

Work week: 9/80
Duration: Up to 1 year
Location: Melbourne, FL
Rate: $36 - $37/hr
Tentative Start Date: ASAP

Aerospace Systems has an opening for an Associate Industrial Engineer to join our team of qualified, diverse individuals. This position will be located in Melbourne, Florida.

Responsibilities for this position include (but are not limited to):

Analyzes and designs sequence of operations and work flow to improve efficiencies in plant or lab facilities and equipment layouts; and establishes methods for maximum utilization of facilities and personnel. Conducts studies pertaining to cost control, cost reduction, inventory control, and production record systems. On the basis of these studies, develops and implements plans and programs for facility modifications and revisions to operating methods. May assist facilities engineers in the planning and design of facilities.

Basic Qualifications: Bachelor's degree in a science, technology, engineering, mathematics (STEM).

Preferred Qualifications: Experience in a manufacturing environment.
 
Job Number: JK-1830
Job Location: Melbourne, FL
Rate: 37/hr max
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Associate Manufacturing Analyst 1 - no clearance CA

Description:
Associate Manufacturing Analyst 1 (Job Number: 19039381)

Number of Openings: 1

Location(s): United States-California-Palmdale


Shift: 1st Shift

Target Start Date: Apr 6, 2020

Target End Date: Apr 2, 2021

Work week: 4/10

Duration: Up to 1 year

Location: Palmdale, CA

Rate: $28 - $29/hr

Tentative Start Date: ASAP

Seeking individual who is willing to work in a fast paced manufacturing environment covering multiple programs within the assembly tooling organization. The Candidate must provide and project an atmosphere focused on teambuilding and collaboration across multiple individuals and across multiple shifts.

Candidate will support assembly tooling operations across multiple sites & shifts in the areas of business & customer operations and related processes in a team-based manufacturing environment.

The candidate will be responsible for weekly updates of data bases, developing/creating and presenting visibility presentations that provide the team with project updates, issues, risks and work flow forecasts.

The candidate will have daily interaction with internal and external customers with respect to product scheduling, problem resolution, and process improvement.

Proficient with all Microsoft platforms including Excel, Project, and PowerPoint. Candidate may be required to work & support any shift as well as overtime as necessary.

The candidate may facilitate self-directed work teams, provide training in core skill areas to teams and peers, and interact with internal and external customers with respect to product planning, problem resolution, and process improvement.

Incumbents are generally experienced in one or more areas of manufacturing operations.

Basic Qualifications:

•Candidate must have the ability to obtain/maintain a DOD Secret Clearance
•Must be familiar with MS Office (Word, Excel, PowerPoint)
•Bachelors degree

Preferred Qualifications:

•Aerospace manufacturing experience is a preferred.
•Ability to work within an aerospace production environment with an emphasis on tooling operations and production interface is preferred.
•Must have the ability to work and communicate with various levels of peers and leadership through written and verbal communications.
 
Job Number: JK-1842
Job Location: Palmdale, CA
Rate: 29/hr max
Duration: 1 year
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Software Engineer

Description:
seeking a talented and motivated Avionics Software Engineer to join our Avionics Team. The ideal candidate will have experience with software development programs in aerospace or similar field. We are looking for someone who enjoys working in an embedded software environment, with an emphasis on safety-critical aerospace projects.

Required Knowledge/Experience
• Experience with C and C++ embedded software
• Experience with aerospace software projects
• Experience with networking, Ethernet packet generation and parsing
• Experience with MATLAB, Simulink


Desired Knowledge/Experience
• Experience working with Interface Control Documents
• Experience working with XidML standard and INEA formatted data
• Experience working with flight simulators
• Experience in creating written documentation
• Experience with the Atlassian software project management suite including JIRA, Bitbucket (Git), Confluence, and Crucible



Responsibilities
• Develop and maintain internal tools to help with simulation and mission control activities
• Actively participate in code reviews, requirements development, internal audits, and other software-related development activities
• Monitor program performance after implementation to prevent reoccurrence of program problems and ensure efficiency of operations
• Participate in risk management meetings


Educational Requirements:
Must have a Bachelor of Science degree in Software Engineering or a related engineering discipline from an accredited university, or equivalent combination of work experience and education

Professional Requirements:
• 4 or more years of software development programs in aerospace or similar field
• Experience with safety critical embedded system hardware and software
• Experience with real-time operating systems
• Strong foundation of fundamentals of electrical engineering
• Strong organizational and written communication skills
• Applicants must be U.S. persons as defined by the ITAR (22 CFR §120.15)


The Structures Company is an AA/EOE.
 
Job Number: 363
Job Location: Mojave, CA
Rate: OPEN - **DOE**
Per Diem: Yes
Overtime: Possible
Duration: 10+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Bleed Air Systems Design Engineer - 2 Openings

Description:
General Summary:
The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
1. Prepare 3D layout models of the BAS and VCS.
2. Prepare 3D installation and detail models of the BAS and VCS.
3. Prepare 2D installation, assembly and detail drawings of the BAS and VCS.
4. Work in a team environment supporting liaison engineering to research root cause and address production discrepancies.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year
college or university program
2. Minimum 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.
3. Minimum 3+ years’ experience utilizing Catia V5 3D modeling software
Must Haves:
Engine Bleed air design experience
Part 23/25 aircraft experience
Catia V5 3D/2D experience
Degree preferred


The Structures Company is an AA/EOE.
 
Job Number: 369
Job Location: NC
Rate: $50-$55/Hr. **DOE**
Per Diem: Yes
Overtime: Yes
Duration: 1+ Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Machinist

Description:
We have a long term contract for a CNC Machinist. Must have the following:

- 2 years experience
- 3, 4, 5 Axis Machine experience.
- GED or HS Diploma.
- Aerospace experience.
- Blueprint reading.
- Shop mathematics.
- Able to work 4/10 shift.

EOE.
 
Job Location: Tulsa, OK
Rate: $25/hr.
Per Diem: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Structural Design Engineer Openings

Description:
Design and configuration of composite primary aircraft structure.
Experience during preliminary/conceptual design phase required.
Support of subsystems integration and packaging into primary structure.
Strong knowledge and understanding of latest structural design, as well as manufacturing trends in the Aerospace industry.
Analyze the applicability of new and emerging technologies and advanced techniques.
Serve as a design focal between the program and Tier 1 suppliers.
Provide technical support in design and development of the preliminary structures layout that meets weight, cost, manufacture-ability and certification requirements.
Support new business development, trade studies and proposal activities.
Support technical review of supplier capabilities and progress.

Requirements:
Must be a US or Canadian citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772.
Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure / confidentiality agreement with current or any former employer that would prevent you from fully performing the duties of the position.
Must have a bachelor’s degree in Aerospace or Mechanical Engineering, or similarly related area.
8+ years of experience in performing design of large aerospace structures.
Strong composite structural design background.
Proficiency with CATIA V5 and Teamcenter PLM is preferred.
Knowledge of the conceptual and preliminary design phases of aircraft development is strongly preferred.
Thorough understanding of the structural design requirements for Part 25 certification is preferred.
Highly self-motivated with a strong bias for action, and excellent problem-solving skills across multi-disciplinary skill sets.

The Structures Company, LLC is an AA/EOE.
 
Job Location: Reno, NV
Rate: Open
Per Diem: Yes
Overtime: Possible
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract Administrator Analyst

Description:
We have an Excellent Contract to Hire position for a Contract Administration Analyst to join a leading Company located in the Redmond, WA area.
** Position requires U.S Citizenship.

Job Responsibilities:
Assists in the administration of major contracts.
Supports proposal development and negotiations and associated contract awards, change orders, and/or modifications.
Responsible for preparing a variety of reports, documentation, justification, and recommendations as directed.
Coordinates with a multi-disciplined Program Management team for preparation of proposal documents in response to external customers' proposal requests.
Performs review and evaluation of terms and conditions of contracts for contractual requirements and risks.
Coordinates with the Program Management team and Accounts Receivable to provide timely invoicing and payment for assigned contracts.
Interfaces with internal and external customers to answer inquiries, conducts fact-finding discussions, and interprets contract terms for problem resolution.
Prepares weekly status reporting to management of work in progress, prepares responses to internal data calls as required.
Performs contract closeout activities to include physical and electronic filing and interaction with multi-functional teams.
Organizes and assumes responsibility for the maintenance of files, records, and other documents.
Stays current on changes to government regulations and industry practices.

Basic Hiring Criteria:
Bachelor’s degree in an appropriate discipline with three (3) years’ experience, or an equivalent combination of education and experience.

Desirable Qualifications:
Familiarity or working knowledge of Federal Acquisition Regulation, Defense Federal Regulations (DFAR), related federal and state legislation and regulations, and the Uniform Commercial Code.
Prior contract administration experience within the Aerospace & Defense industry.
Must have excellent knowledge of personal computer applications, including word processing, spreadsheet, and database.
Possess substantial knowledge of standard office procedures, filing systems, related office machines, and general aspects of the job.
Must have excellent oral and written communication skills to interact effectively with individuals representing outside organizations and or within the company.
Ability to work well under constantly changing deadlines and priorities expected.
Basic understanding of operations control and proposal evaluation desired.
Full understanding and application of contract administration principles, concepts, practices, and standards a plus
 
Job Number: 39833
Job Location: Redmond, WA
Rate: 31.25
Per Diem: NO
Overtime: YES
Duration: 6 Month +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TAD PGS INC
Attention: Maria Gomez
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
DaDT Stress Analysis Engineer

Description:
Seeking a first-rate aerospace Stress Analysis Engineer with experience in vehicle stress analysis, repairs, and production manufacturing as well as strong proven Fatigue and Damage Tolerance experience. The stress analyst will compile analysis, reports, models, and margins of safety into standardized formats for upload into product lifecycle manager.

Additionally, the analyst will support the design engineering staff with drawing release. The stress analyst is ultimately responsible for ensuring the vehicle structural design meets the customer mission requirements with positive margins of safety.

Your Mission

Responsibilities:
• Reviews, updates, and compiles engineering analytical definition of structural components and assemblies based on records from the prototype build project
• Develops standardized analysis criteria and templates
• Plays an integral role in the work flow release process for all structural designs
• Supports review of manufacturing plans and procedures to ensure compliance with design and loads requirements
• Supports the creation of structural test plans which will be used to verify manufacturing

What You Bring
Basic Qualifications

• Bachelor’s degree from an accredited institution, with a concentration in a relevant Engineering discipline
• Strong knowledge and understanding of Durability and Damage Tolerance Analysis on both Metallic and Composites components.
• Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures using Femap as a pre and post processor.
• Minimum 7 years of applicable experience in the analysis of structural systems using strength of materials, finite element based methods and DaDT analysis.
• Experience with free-body diagrams and strong understanding of Solids Mechanics and Fracture Mechanics as well as classical stress analysis techniques
• Excellent verbal and written communication skills
• Excellent organizational and problem-solving skills
• Excellent computer skills, including Outlook, Word, Excel and PowerPoint
• Applicants must be “U.S. persons” as defined by the ITAR (22 CFR §120.15)

Preferred Skills and Experience
• Hands-on experience with composites part fabrication and assembly processes and proficiency in Hypersizer a plus
• Pilot, aircraft homebuilding and rapid prototyping experience a strong plus
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
• Experience with manufacturing-based ERP systems, such as Oracle, is a plus

The Structures Company is an AA/EOE.
 
Job Number: 367
Job Location: Mojave, CA
Rate: **DOE**
Per Diem: Yes
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Deceleration Engineer

Description:
Inconen is looking for a Deceleration Engineer for our client, a well-known Aerospace Company, in Orlando, FL.

Duties:
Our client in Orlando, FL is seeking an Aerospace or Mechanical Engineer to support the deceleration team. This team is responsible for design and analysis of the parachute systems used for air-extraction of our various launch vehicles. These air-extractions are similar in concept to standard military cargo extraction from aircraft like the C-130 or C-17A.

The successful candidate will be asked to perform parachute design activities through 6DOF simulation and loads analysis. This entails designing parachute structures, reefing ratios, riser and mainline lengths, etc. to ensure a successful extraction and descent while ensuring launch vehicle load capabilities are not exceeded. The candidate will be expected to read, understand, update, and maintain a 6 Degree-of-Freedom simulation used to simulate the extraction and descent of our clients launch vehicles. This position will require a background in vector mechanics, dynamics, and software configuration control processes. The candidate may also participate in estimating aerodynamic properties and loads through the use of computational fluid dynamics (CFD) software.

Essential Job Functions (Including % of Time for Each):
50% - Activities to include tooling design, tooling procurement and fabrication, and conduct tooling functional checkout. Responsible for tooling design based on efficiency, ease and safety or operation, ease of maintenance and cost of fabrication. Interfaces with suppliers and manufacturing personnel to assure that tool design requirements and intent are met. Coordinate tooling functional checkout with manufacturing disciplines prior to releasing tooling to manufacturing operations.
15% - Parachute Design and Loads Analysis.
40% - Parachute/Extraction System Modeling and Simulation updates.
35% - Computational Fluid Dynamics (CFD) of Parachutes and Target System.
10% - Oversee field installation and testing of Parachute design.

Skills:
REQUIRED:
1. Minimum of 2 years of professional experience working with parachute deceleration systems or an equivalent combination of experience and education.
2. B.S. in Aerospace, Mechanical, or equivalent degree.
3. Prior experience with 6DOF simulation of deceleration systems.
4. Prior experience with Computational Fluid Dynamics (CFD) software.
5. Ability to program and use MATLAB/Simulink.
6. Exceptional written and oral communication skills to include report writing, requirements derivation, and documentation, as well as design review presentations.

DESIRED:
1. Experience with programming in C, C++, and Fortran and using MATLAB/Simulink.
2. Experience working with deceleration systems.
3. Experience using CANO, CALA, TENSION, and/or LS-DYNA analysis tools.
4. Working knowledge of aircraft/missile dynamics and control.
5. Experience with air drops from military aircraft.
6. Active DoD Secret Clearance.
 
Job Number: 12119
Job Location: Orlando, FL
Rate: $38.00/HR
Per Diem: N/A
Overtime: Possible
Duration: Direct Hire
Start Date: ASAP
Input Date: 01/03/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Interior Design Engineer - Solidworks

Description:
POSITION SUMMARY:
Provides all levels of engineering drawings related to interior cabin furnishing and components in support of VIP aircraft completions. Mentors other engineers on department techniques and processes. Must have aircraft interiors completions experience and experience designing monuments, galleys, credenzas, closets, beds, tables, etc.



ESSENTIAL JOB FUNCTIONS:
1. Develops advanced level design data packages for interior cabin furnishing in support of VIP aircraft completions.
2. Utilizes airworthiness requirements and the project specification to create drawings.
3. Creates and reviews engineering drawings, specifications, service bulletins, reports, etc.
4. Performs research and design relating to the production of engineering drawings necessary for installation and completion of custom aircraft interiors.
5. Prepares advanced level interior cabin furnishings reports, Engineering Authorizations (EA’s), drawings, and EO’s.
6. Develops advanced level interior cabin furnishings modifications and installation work instructions, procedures and recommendations.
7. Mentor and train less experienced engineers within department to increase overall efficiency of department.
8. Identifies discrepancies and/or problems with drawings before releasing to production and implements correction action to ensure the timely release.
9. Provides advanced level technical support and engineering disposition in order to resolve aircraft engineering/interior cabin furnishing problems.
10. Using company procedures, applies engineering knowledge to resolve complex issues.
11. Maintains advanced level awareness of FAA regulations and required compliance of FARs, ADs, SBs.
12. Actively works to improve daily processes, and ensures all work meets completion aircraft requirements.
13. Performs other duties as assigned.


MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
1. Bachelor’s Degree in Mechanical or Structural Aerospace Engineering or comparable.
2. 2-5 years’ experience in Furnishings, Design or Structural Engineering.
3. Familiarity with the Supplemental Type Certificate (STC) process

REQUIRED SKILLS AND ABILITIES:
1. Proficient with Microsoft Word, Excel, PowerPoint, Outlook, and Internet Explorer.
2. Knowledge of Federal Aviation Regulations (FARs) governing aircraft certification Preferred.
3. Ability to read, write, speak, and understand the English language.
4. Computer Aided Drafting/Design - SolidWorks required
5. Aviation background and electrical systems experience required.
6. Strong knowledge of industry mechanical systems and documentation standards.
7. Experience with electrical systems and components.
8. Strong communication and problem-solving skills.
9. Strong time-management and organizational skills.





The Structures Company is an AA/EOE.
 
Job Number: 339
Job Location: Indianapolis, IN
Rate: $50-57/Hr. **DOE**
Per Diem: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Wing and Engine Anti-Ice

Description:
General Summary:
The Contingent Designer Wing and Engine Anti-ice is responsible for providing design expertise in support of Wing and Engine anti-ice systems through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
1. Prepare 3D layout models of the Wing and Engine Anti-ice Systems.
2. Prepare 3D installation arid detail models of the Wing and Engine Anti-ice Systems.
3. Prepare 2D installation, assembly and detail drawings of the Wing and Engine Anti-ice Systems.
4. Work in a team environment supporting liaison engineering to research root cause and address production discrepancies.


Education, Work Experience, Certification and/or Licensure:
5. Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program with 5+ years of directly related design experience in the development and certification of aircraft Wing and Engine Anti-ice Systems.
Must Haves:
Aircraft anti-ice design experience
Part 23/25 aircraft experience
Catia V5 3D/2D experience
Degree preferred


The Structures Company is an AA/EOE.
 
Job Number: 370
Job Location: NC
Rate: $50-$55/Hr. **DOE**
Per Diem: Yes
Overtime: Yes
Duration: 1+ Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Director of Engineering

Description:
A Director of Engineering job in Ft. Worth, Texas is currently available through Belcan with one of our Aerospace clients. You will be responsible for providing individual technical input and leadership in the spares, refurbishment and new production group. You will also be involved with the development and analysis, new technology assessments, evaluation of alternative technical solutions, and system integration and test. You will also have project/program management responsibility. To be considered for this role, you will need a Bachelors' Degree in in engineering or equivalent scientific discipline and at least 10+ yrs. of applicable manufacturing engineering leadership experience. This is a great Direct/Full-time opportunity with a growing company.

Director of Engineering Job duties:

* Lead a group of 5 - 7 experienced engineers
* Lead engineers in the F-16 spares, refurbishment and new production groups
* Project Management for F-16 spares, refurbishment and new production
* Oversee the project and program management portion of the projects
* Develop/improve systems for the manufacturing processes

Qualifications:

* Bachelors' Degree in engineering or equivalent scientific discipline and at least 10+ yrs. of applicable engineering experience
* Direct experience with the F-16 manufacturing processes
* Experience with CATIA
* Experience with JOB Boss preferred
* Understanding of F-16 spares, refurbishment and new product development
* Hands on Managerial and Program/Project Management experience required
* US Citizenship is required for this job
* Outstanding communication and writing skills are required to convey technical ideas to both the customer community and to company personnel.

If you are interested in this Director Engineering job in Ft. Worth, TX, please apply via the 'apply now' link provided. Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.


 
Job Number: 299311
Job Location: Fort Worth, TX
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EWIS Design Engineer

Description:
Required Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches. Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.

• Aerospace Experience is required
• Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
• Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
• Knowledge of Catia V5 Electrical is required
• Knowledge of Mentor Graphics Capital software is required
 
Job Number: 19-148021
Job Location: GA
Overtime: Possible
Duration: 6 months +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EWIS Harness Installation Design Engineer

Description:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Unique skills:
• Required Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS.
• Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches.
• Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements.
• Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
• Aerospace Experience is required
• Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
• Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
• Knowledge of Catia V5 Electrical is required

Essential Functions:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area

Education and Experience Requirements:
• Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Five (5) ys in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
 
Job Number: 24-392
Job Location: Savannah, GA
Rate: $58-$63/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Power

Description:
A Power/Electrical Engineer job in Anaheim, California is currently available through Belcan. This is a contract role with one of aerospace clients. You will be responsible for design and development of electrical power equipment for shipboard applications and design support of other applications. To be considered for this role, you will need to have a Bachelor of Science degree in Electrical Engineering, Power Engineering or equivalent from a four-year college or university; and 5 to 10 years experience in the design of power conversion equipment or related equivalent experience and/or training.

Power/Electrical Engineer Job duties:
* Provide power electronics engineering support for design, development, integration, operation and sustaining of electrical components, equipment and systems under moderate supervision.
* Participate in all stages of development from design through manufacturing support and system integration.
* Interpret customer specifications to define requirements for power electronics circuit and systems design.
* Starting from conceptual phase, provide detail design of switch mode power converters and inverters, transformer rectifiers, control loops and/or magnetic components.
* Perform engineering analysis of power electrical circuits and systems.
* Perform hardware bring-up and integration and support power conversion systems hardware / software integration.
* Provide complete documentation, product verification and part's list.
* Write product and test specifications.
* Provide sustaining engineering on existing products supporting manufacturing and test departments.
* Provide technical support for manufacturing, production and fielded equipment.

Qualifications:
* Bachelor of Science degree (B. S.) in Electrical Engineering, Power Engineering or equivalent from a four-year college or university; and 5 to 10 years' experience in the design of power conversion equipment or related equivalent experience and/or training.
* Must have design familiarity with power conversion topologies and electrical components IGBTs, MOSFETs and SCRs used in power switching applications.
* Circuit analysis applications, PSPICE preferred.
* Magnetics design and closed control loop design experience, a plus.
* Must be able to work as a key member of the design team with other Power Design Engineers, Digital and Analog Engineers, System Engineers and Software Engineers.
* Proven effective communication with Senior Project Management and customer representatives is essential.

If you are interested in this Power/Electrical Engineer job in Anaheim, California, please apply via the 'apply now' link provided.  Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.


 
Job Number: 298328
Job Location: Anaheim, CA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer / Data Processing Engineer - Clearance CA

Description:
167091 Job Title: Electrical Engineer / Data Processing Engineer

Work Site Address: Palmdale, CA 93599
Job Number: 2677-1
Max Pay Rate: $90.00/hr
Start Date: 12/9/2019
End Date: 2/26/2021
Position Type: Contract

Job Summary:
Will be responsible for all aspects of system administration, implementation, and operations for assigned programs in Palmdale. Will interface with personnel in the development of data and system requirements, designs and installation. Works with instrumentation engineers to identify data processing needs and identify cost-saving solutions. The candidate must have strong analytical and troubleshooting skills and be able to work independently. Occasional extended hours and weekends are required.
The position will be responsible for ensuring data quality and that appropriate metrics are in place and utilized to support quality data products.

Tasks include:
• Receive, process and troubleshoot IRIG 106 formatted data products per established processes
• Coordinate with Instrumentation Engineering, Operations Engineering, IT administration, and leadership on issues, status and capabilities
• Diagnosis and resolution of problems encountered in the recovery of test data
• Support IT assignments as required

At this level the successful candidate will expected to be familiar with the data processing field and be familiar with server system administration and desktop support. The candidate will continue actively work to expand his or her knowledge of the discipline and of specific tasking.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
Desired skills
The ideal candidate possesses:
• Experience with IT infrastructure operations, computer networking, and/or software programming concepts
• Experience in data processing and network system administration
• Capability to develop, test, and troubleshoot data processing algorithms for aircraft data
• Programming in C/C++
• Certification
• Subject Matter Expert in data collection systems
• Experience working with the application Common Data Processing
• Experience with installation of Network Server systems for data processing
• Experience working in flight test
• Hardware and/or software programming experience
• Understanding of IRIG 106
• Experience with various instrumentation vendors hardware and software
• Symvionics IADS (Interactive Analysis and Display System) use and programming
• Experience with and/or knowledge of working with communications protocols, specifically Fibre Channel, MIL-STD-1553, IEE-1394, CAIS Bus (Common Airborne Instrumentation System Bus), RS-485
• Demonstrated ability to develop and implement process improvement initiatives
• Excellent communication skills
• Bachelor's degree in relevant field (electrical engineering, computer engineering, mechanical engineering, aerospace engineering, computer science, etc.)

Qty 1 position

This position is located at a facility that requires special access. This position requires occasional travel and odd-shift work.
 
Job Number: JE-2677-1S
Job Location: Palmdale, CA
Rate: 90/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical/Avionics Engineer

Description:
Position Summary:

Design complex, standard or custom, electrical and avionics integration installation packages in new AHI aircraft. Create engineering drawings, interface with pertinent stakeholders in certification, production and flight test, support fleet sustainment activities and/or support STC projects.

This assignment is expected to be approximately 12-18 months in duration.

Primary Responsibilities:

Detail Design: 50%
Create detail/assembly/installation wiring diagrams and power distribution schematics for new helicopter completions and STC projects.
Review and facilitate engineering package release.
Works with groups of engineers to complete projects.
Works under general supervision from the Engineering Manager
Follows established procedures
Work is reviewed for soundness of technical judgement, overall adequacy and accuracy
Project Coordination: 20%
Coordinates essential information into the configuration management system listing electrical and avionics installations for each aircraft unit produced by AHI
Participate in developing pricing information based on installation effort and provide quotes to AHI Marketing Department for standard and custom options on new aircraft.
Engineering Support: 20%
Support Marketing, Field Service, Flight Test and FAA Certification organizations as needed.
Act as liaison to manufacturing and production efforts as needed.
Support installation, functional and operational tests, and ground and flight tests.
Structural Substantiation: 10%
Performs preliminary electrical load analysis in support of initial layout and design concept.
Additional Responsibilities:

Other duties as assigned.
Qualified Experience / Skills / Training:

Education:

Required:

Bachelor's degree in Aeronautical or Electrical Engineering from an accredited college/university or equivalent experience
Experience:

Required:

Minimum three (3) years of directly applicable engineering experience in an aviation/aerospace manufacturing or completions environment.
Preferred:

Minimum one (1) year of helicopter design and integration.
Licensure/Certifications:

Required:

NA
Preferred:

N/A
Knowledge, Skills, Demonstrated Capabilities:

Required:

Knowledge of aviation/aerospace electrical design requirements, aviation/aerospace industry standards and the Federal Aviation Regulations. Direct experience with rotorcraft is preferred.
Communication Skills (Spoken, Written, Influencing, Proficiency in Other Languages):

Must be able to communicate effectively in the English language (verbal and written).
Conversational French and/or German is a plus.
Technical Systems Proficiency:

Must be proficient with Microsoft Office Suite programs.
Familiarity with AutoCAD and SAP programs
Travel Required:

5%
Minimal domestic and International travel is required.
Citizenship:

US Person under ITAR definition (U.S. Citizen, green card holder or person covered under our existing ITAR license)
 
Job Location: TX
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Tracey Hill
Address: 1600 AIRPORT FWY STE 400
City, State: BEDFORD, TX 76022-6871
Phone: 817/545-4009
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic Manufacturing Engineer NY

Description:
Job title: Electronic Manufacturing Engineer
Request number: 6309
Number of openings: 1
Position location: East Aurora - NY
Employment type: Contract
OT exempt: No

Shift: 1st
Education Requirement: BS/BA
Driving on company time?: No
Maximum Hourly Pay Rate: 60
Start Date: 02/17/2020
Tentative End Date: 07/20/2020

Job Description
Function:
1. The Electronics Process Engineer is a focal point for resolving all questions/problems concerning the manufacture and assembly of electronics development and production hardware. This includes concurrent engineering of circuit board and controller design, and the processes / equipment to manufacture Circuit Card Assemblies, Cable Assemblies and Controllers.
2. The incumbent initiates changes and deviations to the design or specification requirements.
3. They are the primary contact for customers, vendors, and internal Moog personnel on all technical processing problems and questions.
4. The incumbent frequently functions in the manner of a program manager, on technical problems, coordinating Moog resources for the solution of a problem and communicating timely information to the affected groups within Moog and to the customer/supplier levels.
5. The incumbent provides Moog SDG Cross facility support
6. The incumbent provides Electronics Contract Manufacturer support (for Electronics Buy programs)

Essential job functions:
1. Provide production assembly/test instructions, training and monitoring to maintain production.
2. Evaluate, request, and implement equipment to meet production requirements.
3. Assure and maintain design integrity, producibility and quality in production products.
4. Provide process engineering support as required to other Moog departments to maintain and improve quality, schedule, and cost objectives.
5. Complete electronics manufacturing readiness deliverables: Provide Routings, Op sheets, Assembly Worksheets, machine programming, solder profiling, tooling and fixturing to A&T Operations
6. Provide on demand support to A&T Operations as required from kit pull thru stock
7. Address stop work issues in a timely fashion– address non-standard work (e-HR and NC), communicating timely information to the affected groups within Moog and to the customer/supplier levels.
8. Prepare and present electronics manufacturing information at PDR, CDR and MRR

Required skills:
• Bachelor of Science Degree in Electrical, Mechanical, Chemical or Industrial Engineering + one year relevant technical experience
• Alternately, a Bachelor of Technology Degree in Engineering + five years of relevant technical experience
• Demonstrated strong technical written and verbal communication skills
• Knowledge in areas of Root Cause / Corrective Action, LEAN and Project Planning
• Must be a US citizen, capable of obtaining a government security clearance
• Certification to J-STD-001, IPC-A-610 and NASA 8739 is desirable

Scope:
Electronics manufacturing methods – Surface Mount Technology, Plated Through Hole Technology, soldering, cleaning, polymeric applications, cable assembly, box build, rework and repair
Machine Programming utilizing Aegis CircuitCam software tool
Electronics Processing capital planning, specifications, acquisition and qualification
Electronics DFX – Review designs throughout the design cycle in regards to Design For Manufacturability, Design For Assembly, Design For Test and Design For Cost
Electronics assembly/processing materials and chemicals expertise
Education:

Other Requirements
****Pre-Screen Questions Required w/ Submittals****

Pre-Screen Questions – Electronic Manufacturing Engineer
1. What experience do you have where class 3 aerospace electronics are built and tested
2. What electronics industry standard certifications do you currently have or did have – IPC J-STD-001, Space Addendum, IPC-WHMA-A-620, IPC-A-610, IPC-A-600, NASA 8739, WHMA
3. What electronics assembly and/or test machine programming applications have you used
4. What automated soldering process development experience do you have
5. Have you written electronics assembly and/or test work instructions


Position needed for 4-6 months at this point
 
Job Number: MB-6309
Job Location: East Aurora, NY
Rate: 60/hr max
Per Diem: pd split possible
Duration: 5 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Project Manager

Description:
Project ManagerResponsibilities include but are not limited to:

1) Responsible for organizing project personnel, function departments, and external vendors.



2) Developing and leading cross-function teams (Engineering, Production, Quality, Validation, etc.) to implement and progress agile strategies to maintain project schedules.



3) Vendor communication, coordination, and management.



4) Building and maintaining cross-functional integrated project schedules by identifying critical paths and key project interdependencies.



5) Coordinating task assignments, developing resource demand plans, and utilization forecast.



6) Implementation of project Sprints (short, stand up meetings with key resources for critical path deliverables that occur on a regular basis through the week), including training.

7) Sprint tracking, metrics development, and reporting.



8) Managing and monitoring execution of all project deliverables from equipment procurement through system qualifications and project closure.



9) Budget management and reporting.



10) Project risk identification, management, mitigation, and, reporting through tools such as SWOT analysis and risk probability, severity, and impact categorization.



11) Utilizing tools such as MS Project software to analyze schedules, develop scorecards, track KPIs, and generate useful reporting.



12) Organizing and managing project related documents.



13) Schedule, coordinate, and lead project team meetings with agendas and meeting minutes.



14) Project status reporting to all required parties.



15) Closing of projects and proper transition of responsibilities to all impact functions.



16) Additional Project Management activities as directed.



Requirements:

Aerospace industry experience

Project Management tools

Minimum of 3 years as project manager

Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.

This position is subject to the International Traffic in Arms Regulation (ITAR) which requires U.S. person status. ITAR defines U.S. person as an U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee.




Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
Job Number: 20-05107
Job Location: Midway, GA
Rate: 60.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2020-05-31 00:00:00.0
Start Date: 2020-03-01 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Kevin Lord
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FPGA / RTL Hardware Engineer

Description:
*This is a full time, 1 year contract to hire position located in Nashua, NH*



We are seeking an electronic hardware engineer who will support and develop FPGA/RTL designs from design to system integration (design, test, troubleshoot) for embedded military/aerospace analog/digital/mixed signal multi-layer circuit card assemblies/applications.



Candidate duties will include RTL coding, VHDL synthetization placement and routing. For the work, Xilinx Vivado and possibly Altera, Microsemi, Lattice FPGAs will be used. Candidate will be responsible for their design, update/create the specs, and create the RTL design (from bottom up) or from a leveraged code block. Candidate will make a standalone testbench for the design to test basic functionality before handing it off the Design Verification team for detailed testing. Once complete, the designed product will go to the lab for testing and debugging.



Required:
*10 years of FPGA or ASIC digital circuit design in RTL/VHDL (RTL designers also considered)
*Experience with Source Control Tools/Bug Tracking; experience working in a lab environment
*Experience with lab Integration, debug, root cause analysis, lab tools.
*BSEE or equivalent
*Active Secret Clearance



Pluses:
*Xilinx Vivado Verilog or System Verilog
*Linux, GIT Bug Tracking tool such as GForge or JIRA
*FPGA verification and validation
*Testing of VHDL source code, DSP PCIE
*Serial interfaces (MIL-STD-1553, ARINC-429, RS422, RS485, etc), backplane buses including VME, PCI, PCIE
 
Job Number: 562
Job Location: Nashua, NH
Rate: $104.00
Per Diem: yes split
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Control Law Team Leader

Description:
We are seeking a seasoned Flight Control Engineering with successful leadership experience to fill a lead role for an aerospace company located in Nagoya, Japan. Interested candidates should have over 10 years of flight control/dynamics experience as well as senior aerospace program leadership skills.

Responsibilities of the Flight Control Law Team Leader

Manage the team with specialized technical background and knowledge regarding Control Laws Design, Verification and Certification.
Planning, managing and controlling of Control Law design related activities, Desktop Simulations related activities, Manned Simulations related activities, Flight Test related activities, Validation and Verification related activities, including interaction with the pilot community.
Support to integration activities with other areas of the organization including Flight Control Systems, Aeroelastics and Loads.
Preparation of documentation to support Certification and if requested, coordination with authorities (JCAB, EASA, FAA).
Support to Auto-Land and Auto-Pilot Systems and/or activities related to other derivative aircrafts.

Requirements of the Flight Control Law Team Leader

15 plus years of aircraft Flight Control and Flight Dynamics experience.
Previous Leadership experience required.
4 year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation).
Excellent verbal and written communication skills in English.
 
Job Location: Japan
Duration: 2 Years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer (Aerospace - Mesa, AZ)

Description:
NEW Job Opportunity: Industrial Engineer’s - Mesa, AZ

Location: Mesa, AZ
Duration: 1 year plus ++
Rate: $ 54.00 to $ 58.00 p/hr

Job Description:
• Leads the application of Industrial Engineering concepts, techniques, analysis and decision tools to promote and implement changes in manufacturing, engineering and service operations.
• Leads the development of models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provides expert analysis and metrics for consultation to customers (e.g., management, departments, suppliers). Leads in the application of extensive industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements.
• Leads the research, design, development, improvement, and implementation of processes to enhance schedule performance, lower cost, and improve quality, through the expert application of Lean and advanced Industrial Engineering concepts for large scale systems integration and asset utilization. Manages, defines, negotiates, and controls the scope, cost, and timing of projects, and direct the use of project management tools (e.g., work break-down structure, precedence network, resource allocation).
• Ensures project is completed within budget, and on schedule. Leads the use of engineering methods (e.g., mathematical models, simulation, statistics) to develop optimal process designs and efficient utilization of resources (e.g., facilities, personnel, materials, equipment) in the creation and validation of products. Leads the analysis and design of the value stream, including capability, capacity (e.g., make/buy, supplier selection, risk analysis, supplier performance), throughput, work flow and logistics (e.g., critical path, lead-time, transportation, factory layout).
• Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

HOW TO APPLY:
1. Email resume in MS Word Doc Format: albert.peniche@yoh.com
2. Please include month/day of birth (NOT Year) – required for this aerospace client •
 
Job Number: APIEAZ
Job Location: Mesa, AZ
Rate: to $ 58.00 p/hr
Per Diem: No
Overtime: Yes
Duration: 1 year plus ++
Start Date: 2 Weeks
Input Date: 11/14/2020
Firm Name: YOH SERVICES
Attention: Albert Peniche
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/791-1565
800 Phone: 800/298-0666
Website: jobs.yoh.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer (Aerospace - WA)

Description:
NEW Job Opportunity: Industrial Engineer’s - Many Washington locations: Seattle, Renton, Tukwila, Everett

Job Description:
• Leads the application of Industrial Engineering concepts, techniques, analysis and decision tools to promote and implement changes in manufacturing, engineering and service operations.
• Leads the development of models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provides expert analysis and metrics for consultation to customers (e.g., management, departments, suppliers). Leads in the application of extensive industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements.
• Leads the research, design, development, improvement, and implementation of processes to enhance schedule performance, lower cost, and improve quality, through the expert application of Lean and advanced Industrial Engineering concepts for large scale systems integration and asset utilization. Manages, defines, negotiates, and controls the scope, cost, and timing of projects, and direct the use of project management tools (e.g., work break-down structure, precedence network, resource allocation).
• Ensures project is completed within budget, and on schedule. Leads the use of engineering methods (e.g., mathematical models, simulation, statistics) to develop optimal process designs and efficient utilization of resources (e.g., facilities, personnel, materials, equipment) in the creation and validation of products. Leads the analysis and design of the value stream, including capability, capacity (e.g., make/buy, supplier selection, risk analysis, supplier performance), throughput, work flow and logistics (e.g., critical path, lead-time, transportation, factory layout).
• Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

HOW TO APPLY:
1. Email resume in MS Word Doc Format: albert.peniche@yoh.com
2. Please include month/day of birth (NOT Year) – required for this aerospace client •
 
Job Number: APIEWA
Job Location: Renton, WA
Rate: to $ 55.00 p/hr
Per Diem: No
Overtime: Yes
Duration: 1 year plus ++
Start Date: 2 Weeks
Input Date: 11/14/2020
Firm Name: YOH SERVICES
Attention: Albert Peniche
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/791-1565
800 Phone: 800/298-0666
Website: jobs.yoh.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Lead Weight Engineer

Description:
We are seeking an experience Weight Engineer to fill an opening for an aerospace company in Nagoya, Japan. Interested candidates should have aircraft certification experience in relation to weight and center of gravity in addition to flight test experience.

Responsibilities of the Lead Weight Engineer​

Aircraft weight reduction activity and design weight growth study.
Certification activity related to weight and C.G.
Support of the sales, marketing, customer support, flight test, ground test and manufacturing tooling/process related to weight and C.G.
Checking the status and forecast of aircraft weight and C.G.
Checking the status weight of system and structure component vs target weight along with determining or revising the design weight and C.G. envelope.
Designing weight growth plans.
Preparation of weight report and mass data for analysis, tests and manufacturing tooling process.
Preparation of weight and balance manual.
Improvements of weight data gathering and verification process.

Requirements Lead Weight Engineer

15 plus years of aircraft certification experience in relation to weight and center of gravity.
Extensive flight test experience.
Previous Leadership experience required.
4 year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation).
Excellent verbal and written communication skills in English.
 
Job Location: Japan
Duration: 2 Years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Looking for Wire Design Engineer in OK, MO states

Description:
Multiple Positions Below

1. Wire Design & Install Engr 5

Location: Hazelwood, MO
Duration: 5+ Months

Description:
The QF-16 team is responsible for the design and installation of Drone Peculiar Equipment (DPE) to convert retired USAF F-16's into Full Scale Aerial Targets. This role leads all wire harness design activities from schematic wire diagram definition through cable/harness definition. This position supports fielded aircraft as well as two active production lines. The candidate will apply their electrical design background to troubleshoot issues with fielded aircraft, provide technical guidance to supplier management, and provide design support to the production lines. The primary role for this position is to develop the QF-16 electrical design baseline in accordance with new business opportunities.

Typical Education/Experience:
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 10 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD, Master+3 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard

Primary responsibilities:
- Develops and maintains cable/wire harness detail and assembly designs.
- Analyzes results and performs design reviews.
- Develops and maintains electrical product detail, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry, antennas).
- Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, and shop revision requests).
- Documents processes, specifications and procedures that support the design and manufacture of electrical commodities.
- Develops basic statements of work.
- Participates in technical review of supplier capabilities to facilitate source selection.
- Analyzes functional and physical input to assure development of complete integrated design.

Basic Qualifications:
- This position requires the ability to obtain a US Security Clearance.
- 10+ years of experience designing the fabrication of wire harness/cables.
- 5+ years of experience in a leadership role, leading teams or projects to successful completion.

Preferred Qualifications:
- Familiarity with Teamcenter Engineering.
- Ability to interrogate models in Unigraphics (NX).
- Experience communicating with customers and suppliers.
- Experience with aircraft modification design.

Education / Experience:
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 14 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+9 years' related work experience, Master+12 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

Skill Code: 601-Wire Design & Install Engr-General





2. Wire Design & Install Engr 5

Location: Oklahoma City, OK
Duration: 6+ Months

Description:
Provides guidance in the development of cable/wire harness detail and assembly designs. Provides guidance in the development of electrical product detail, assembly and installation designs. Provides direction used by multiple teams to analyze complex results and performs design reviews. Provides guidance in engineering design disposition on discrepancies. Defines processes, specifications and procedures that support the design and manufacture of electrical commodities. Provides direction used by multiple teams to develop complex statements of work, metrics, schedules and budgets. Directs the technical review of supplier capabilities to facilitate source selection. Directs the development of functional and physical design requirements to ensure complete integrated design architecture. Works under consultative direction.
OKC Electrical Harness/Cable Group is seeking senior electrical harness/cable engineers. The candidate will mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for client Military Aircraft, Military Derivative Aircraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, B-1B, B-2, B-52 and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft harness/cable design on the various platforms.

This position provides an excellent opportunity to develop new solutions, help grow and mentor the next generation of engineers, and guide the candidates' career towards the submittal of a candidacy for a position in the Technical Fellowship.

Other Job Responsibilities May Include:
- Provides guidance in the development of cable/wire harness detail and assembly designs.
- Provides guidance in the development of electrical product detail, assembly and installation designs.
- Provides direction used by multiple teams to analyze complex results and performs design reviews.
- Provides guidance in engineering design disposition on discrepancies.
- Defines processes, specifications and procedures that support the design and manufacture of electrical commodities.
- Provides direction used by multiple teams to develop complex statements of work, metrics, schedules and budgets.
- Directs the technical review of supplier capabilities to facilitate source selection.
- Directs the development of functional and physical design requirements to ensure complete integrated design architecture.
- Works under consultative mentorship.

Client is the world's largest aerospace company and leading manufacturer of commercial airplanes and defense, space and security systems. We are engineers and technicians. Skilled scientists and thinkers. Bold innovators and dreamers. Join us, and you can build something better for yourself, for our customers and for the world.

Basic Qualifications (Required Skills and Experience):
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 14 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+9 years' related work experience, Master+12 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

Must possess good organizational, interpersonal, and problem-solving skills. Must have demonstrated a strong work ethic and sense of urgency for completing assigned work with a history of meeting commitments. Ability to adjust priorities to multiple demands and unanticipated events.

Highly motivated and must work well in a team environment. The ability to communicate effectively, both verbally and in writing

Skill Code: 652-Wiring Design





3. Wire Design & Install Engr (Level 3, 4, 5)

Location: Tukwila, WA
Duration: 6+ Months

Description:
Wire Harness Installation Design is a unique opportunity to use both electrical and mechanical skills. This position also allows the possibility to see your released engineering be installed while supporting the build during shipside support. Job duties during the design phase include analyzing functional schematics and wire diagrams to understand system design. Developing and maintaining cable/wire harness detail and assembly designs. Performing design reviews to validate spatial integration and requirements verification. Developing and maintaining electrical product details, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry). During the build phase, provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Works under general direction.
Come join Client Commercial Derivative Airplanes in Tukwila, WA with the unique opportunity to work on the next generation platforms. At Client, our engineers use their expertise to create innovative next generation capabilities for a wide variety of amazing aerospace platforms and products. In joining this program, you will be part of an outstanding team of technical designers & engineers making history as we shape this one of a kind next generation Aircraft.

Position Responsibilities:
- Develops, maintains and releases electrical/mechanical drawings, systems designs or engineering documentation and data by applying company, industry and governmental standards.
- Using design tools prepares documentation and incorporates design changes.
- Creates, develops and maintains systems designs by preparing design layouts, modifying existing designs and assisting in identifying design discrepancies.
- Supports engineering system design and functionality validation activities.
- Develops and maintains product installation designs and part designs ranging from simple to moderately complex.
- Coordinates activities and products with internal partners and external suppliers.
- Works under general direction.

Basic Qualifications (Required Skills and Experience):
- Designing or supporting electrical wire harness Installations
- Education/experience typically acquired through advanced technical education from an accredited course of study in Electrical or Mechanical engineering, computer science (e.g. Bachelor) and typically 14 or more years' related work experience or an equivalent combination of technical education and experience (e.g. Master+12 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

Preferred Qualifications (Desired Skills/Experience):
- Active security clearance is preferred
- Client Defense Experience preferred but not required

Skill Code: 679-Electrical/Electronic Installation Design
 
Job Location: Hazelwood, MO
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 months
Start Date: Asap
Input Date: 05/01/2023
Last Updated: 08/10/2023
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Engineer

Description:
- Bachelors degree in aerospace or mechanical engineering.
- Minimum 7 years dedicated structures MRB Engineering experience at a recognized aerospace manufacturer.
- Experience should include creation and justification of engineering dispositions for nonconformances of composite and metallic, pressurized and non-pressurized aircraft structures.
- Composite engineering experience should include fiberglass, carbon/epoxy, laminate/sandwich assemblies.
- Familiarity with results of composite NDI/NDT methods required.
- Experience should be in a Production and/or schedule-driven environment.
- Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
- Strong written/verbal communication and interpersonal skills.
- Must be computer literate (such as, but not limited to: Catia V5, SAP, Solumina, Smarteam, Word, Excel)
 
Job Location: Tulsa, OK
Rate: $60/hr to $68/hr
Per Diem: Possible
Overtime: Yes
Duration: Long term Contract
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Engineer

Description:
- Bachelors degree in aerospace or mechanical engineering.
- Minimum 7 years dedicated structures MRB Engineering experience at a recognized aerospace manufacturer.
- Experience should include creation and justification of engineering dispositions for nonconformances of composite and metallic, pressurized and non-pressurized aircraft structures.
- Composite engineering experience should include fiberglass, carbon/epoxy, laminate/sandwich assemblies.
- Familiarity with results of composite NDI/NDT methods required.
- Experience should be in a Production and/or schedule-driven environment.
- Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
- Strong written/verbal communication and interpersonal skills.
- Must be computer literate (such as, but not limited to: Catia V5, SAP, Solumina, Smarteam, Word, Excel)
 
Job Number: 138961
Job Location: Tulsa, OK
Rate: $64/hr to $68/hr
Per Diem: No
Overtime: Yes
Duration: Long term Contract
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Ravi Singh
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Engineer

Description:
Unique Skills:
- Bachelors degree in aerospace or mechanical engineering.
- Minimum 7 years dedicated structures MRB Engineering experience at a recognized aerospace manufacturer.
- Experience should include creation and justification of engineering dispositions for nonconformances of composite and metallic, pressurized and non-pressurized aircraft structures.
- Composite engineering experience should include fiberglass, carbon/epoxy, laminate/sandwich assemblies.
- Familiarity with results of composite NDI/NDT methods required.
- Experience should be in a Production and/or schedule-driven environment.
- Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
- Strong written/verbal communication and interpersonal skills.
- Must be computer literate (such as, but not limited to: Catia V5, SAP, Solumina, Smarteam, Word, Excel)
- Typically a 40 hr work week, with some week/weekend OT a possibility.
- Position is full-time at a supplier in Tulsa, OK

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) ys in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.


Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Principle Duties and Responsibilities:

Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering related field preferred
The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Location: Tulsa, OK
Rate: Open
Per Diem: No
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Vivek Singh
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Structures Engineer

Description:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

Unique Skills:
MRB Structures Engineer
• Bachelors degree in Aerospace or Mechanical Engineering.
• Minimum 10 years dedicated Structures MRB Engineering experience at a recognized Aerospace Manufacturer.
• Experience should include creation and justification of engineering dispositions for nonconformances of composite and metallic, pressurized and non-pressurized aircraft structures.
• Experience should include all components of the aircraft (Wing, Fuselage, Empennage).
• Experience should be in a Production and/or schedule-driven environment.
• Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
• Strong written/verbal communication and interpersonal skills.
• Must be computer literate (such as, but not limited to: Catia V5, Solumina, SmarTeam, Word, Excel)
• Initially 1st shift. Occasional weekends expected. Transition to 2nd shift may be required.

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Essential Functions:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
 
Job Number: 24-398
Job Location: Savannah, GA
Rate: $66/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Structures Engineer

Description:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Unique Skills:
MRB Structures Engineer
• Bachelors degree in aerospace or mechanical engineering.
• Minimum 7 years dedicated structures MRB Engineering experience at a recognized aerospace manufacturer.
• Experience should include creation and justification of engineering dispositions for nonconformances of composite and metallic, pressurized and non-pressurized aircraft structures.
• Composite engineering experience should include fiberglass, carbon/epoxy, laminate/sandwich assemblies.
• Familiarity with results of composite NDI/NDT methods required.
• Experience should be in a Production and/or schedule-driven environment.
• Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
• Strong written/verbal communication and interpersonal skills.
• Must be computer literate (such as, but not limited to: Catia V5, SAP, Solumina, Smarteam, Word, Excel)
• Typically a 40 hr work week, with some week/weekend OT a possibility.
• Position is full-time at company facility in Tulsa, OK. Short-term assignments in Riverside, CA and/or Foley, AL may be required.

Education and Experience Requirements:
• Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Five (5) ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.


Essential Functions:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area
 
Job Number: 24-399
Job Location: Tulsa, OK
Rate: $66/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Systems Engineer

Description:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services.

Unique Skills:
MRB Systems Engineer
• Bachelors degree in aerospace or mechanical engineering.
• Minimum 7 years Systems MRB Engineering experience at a recognized aerospace manufacturer.
• Experience should include creation and justification of engineering dispositions related to composite nacelle systems.
• Aircraft MRB Systems experience should include: ECS installations, Auxiliary mechanism verifications, assistance with movable component installation and rigging, Acceptance Test Procedure (ATP) deviations and resolution, installation and operational verification of nacelle components ( fixed cowl, hinged cowl doors, TR,etc.).
• Experience should be in a Production and/or schedule-driven environment.
• Strong written/verbal communication and interpersonal skills. Must be computer literate (such as, but not limited to: Catia V5, SAP, Solumina, Smarteam, Word, Excel)
• Typically a 40 hr work week, with some week/weekend OT a possibility.
• Position is full-time at company facility in Tulsa, OK. Short-term assignments in Riverside, CA and/or Foley, AL may be required.

Education and Experience Requirements:
• Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Five (5) ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Essential Functions:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area
 
Job Number: 24-397
Job Location: Tulsa, OK
Rate: $66/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer (Aerospace Industry)

Description:
This candidate will:
• manage high complexity design and planning of layout for assembly and materials handling.
• Adapt machines or equipment design to factory and production conditions.
• Plan Sequence of Operations and specification procedures for the fabrication of tools and equipment and other functions that affect product performance.

Candidates will support a work transfer project to India.

Project scope includes:
• baselining current processes,
• implementation of corrective actions, and
• related fixture design.

Additional duties to include support of legacy product lines. Legacy lines include:
• aircraft wipers,
• video systems, and
• electronic sub systems.

Required Qualifications
• Good interpersonal skills and be self-motivated.
• Bachelor’s degree

Desired qualifications:
• Experienced Manufacturing Engineer capable in process design, work instruction creation and fixture design.
• Experience in Aerospace Engineering
• Proficiency in SAP, Teamcenter, CREO
 
Job Number: 2010110561
Job Location: Burnsville, MN
Per Diem: split
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II - 2 Openings

Description:
Manufacturing Engineers Needed. MUST BE US Persons.
MUST have engineering degree.
Aerospace Manufacturing Engineering experience with Catia V5 and Composites required.

• Aviation assembly processes, tooling, and procedures.
• Drawing/Model knowledge and change approval experience.
• Experienced with material processes, applications, and vendors; composites mfg emphasis.
• SAP knowledge / MRP understanding.

JOB QUALIFICATIONS: MANUFACTURING ENGINEER II

Formal Education, Training, Professional Certification and Work Experience:
Bachelor degree in an appropriate discipline from an accredited four-year college or university and two (5-8) years related experience and/or training

The Structures Company is an AA/EOE.
 
Job Number: 366
Job Location: OK
Rate: $50-$55/Hr. **DOE**
Per Diem: Yes
Overtime: Yes
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Materials & Process Engineer

Description:
We are looking for a Materials & Process Engineer in Mojave, CA.
Composites experience is a MUST.
MUST BE US Persons.

Experience with composite material testing and processing is a necessity.
Candidate must be familiar with ASTM testing, data analysis, and writing technical reports.
Authoring of composite related processing specification is desired.
Experience with structural adhesives and metallurgy is an added bonus.

The Structures Company LLC is an AA/EOE.
 
Job Location: Mojave, CA
Rate: $55-80/hr DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-Term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Materials and Processes Engineer

Description:
Summary:
As the Materials & Processes Lead you will report to the Airframe IPT Leadership Team and be responsible for leading development of the material & processes for a business jet.

On any given day you might:
• Support building and lead the Materials and Processes team for the aircraft development
• Lead development of the material and process specifications through collaboration with OEM, suppliers, and vendors to guide program in selecting appropriate materials by drawing from civil, military, and industry standards
• Provide advice on the applications, properties, and processing of advanced material systems to all stakeholders - including, but not limited to, stress, design, customer support, quality, and procurement
• Perform trade studies, write proposals, and support new business development plans

We're looking for someone who has:
• Must have a Bachelor’s Degree in Aerospace or Mechanical Engineering, or similarly related area. Master’s Degree strongly preferred
• 12+ years of hands-on experience in advanced materials and processes qualifications, testing, manufacturing and certification of Part 25 aircraft
• 3+ years of experience leading technical resources and team
• Strong knowledge of aerospace materials, advanced manufacturing processes, test methods and design allowable development
• Knowledge of composite certification and structural bonding requirements for Part 25 preferred
• In-depth and current knowledge of Part 25 regulatory requirements
• Demonstrated success in dealing and influencing internal and external stakeholders
• Experience in engineering support of aircraft production line activities is desirable
• Strong decision making and communication skills
• Excellent problem-solving skills across multi-disciplinary skill sets
• Experience in a global environment working with customers and suppliers

We want to build a company around people who are:
• Highly self-motivated with a strong bias for action
• Effective at nurturing strong professional relationships
• Committed to fostering a culture of empowerment & creativity
 
Job Number: 42-038
Job Location: Reno, NV
Rate: $75-$95/hr
Per Diem: YES
Overtime: Possible
Duration: 1+Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Design Engineer.

Position Profile: Under limited direction, has technical ownership of processes critical to manufacturing aerospace hardware specifically related to isothermal while supporting to achieve established goals and financial targets.



ESSENTIAL DUTIES AND RESPONSIBILITIES:

This is not intended as a comprehensive list; it is intended to provide a representative summary of the major duties and responsibilities. Incumbent(s) may not be required to perform all duties listed, and may be required to perform additional, position-specific tasks.

Use modeling tools to design forging and heat treatment processes to meet customer requirements

Meet both internal and external design milestones on assigned tasks

Work with new product development, metallurgy and process engineering to develop, modify, and improve the processes associated with the production of forgings in accordance with customer design requirements

Support operations with witnessing of new jobs or jobs needing improvement

Assist operations with training of crews by providing rationale for specific instructions the crews are asked to comply with

Implement effective method to capture lessons learned to minimize future technical issues

Support identification and implementation of new technologies as needed

Perform other work-related duties as assigned by management.



Education Requirements:

Basic Qualifications:

Bachelor's degree in Engineering or Physics and a minimum 3 years of experience in a manufacturing environment

Knowledge of finite element analysis and experience using it to model plastic flow or fluid dynamics is required

AutoCAD or SolidWorks or UniGraphics experience

Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.

This position is subject to the International Traffic in Arms Regulation (ITAR) which requires U.S. person status. ITAR defines U.S. person as an U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee.



Preferred Qualifications:

Master's degree in Mechanical or Materials Engineering, or Physics from an accredited institution

Prior experience in Isothermal forging

Experience with DEFORM or STAR-CCM

Problem Solving experience such as DMAIC or 8D

NX-11 experience

Experience in the Aerospace industry

Experience in metal manufacturing, especially using titanium and/or nickel based superalloys.




Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 20-05106
Job Location: Midway, GA
Rate: 55.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2020-05-31 00:00:00.0
Start Date: 2020-03-01 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Paul Chacon
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
****MUST be a U.S. Citizen or Permanent Resident****

Job Description:
1. Manages teams and multiple projects in research, design, and development of mechanical applications to the planning, design, development, and testing of mechanical and/or electromechanical systems, instruments, controls, engines, and ground test / mechanical tests.
2. Additionally responsible for the CAD support of design projects and execution of Engineering design changes.

Qualifications:
1. Ten (10+) years mechanical design experience in an aerospace environment.
2. Strong 3D modeling, design and drafting ability.
3. Strong technical communication skills.
4. Specific experience with Solidworks, ANSI Y14.5, MIL-Standards, Aerospace Materials and Processes.
5. Product background in gearboxes, actuators and cable handling machines is preferred.

Education:
1. Bachelor's Degree required.
 
Job Number: 11969
Job Location: Brea, CA
Rate: $48.25/HR
Per Diem: No
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design/Drafting UG NX 11

Description:
*This is a full time, 6 month contract located in York, PA*



We are recruiting for a Mechanical Designer II who has recent experience in both electrical and structural designing using UG NX 11 (Unigraphics); experience in aerospace/DoD mechanical designing would be helpful, but not mandatory. Candidate will be working on military DoD land armored vehicle systems/structures and parts design.



Much of the work may be in mechanical and parts design, preparing items for machining and fabrication, welding, and assembly. A good knowledge of manufacturing processes will be used daily on manufacturing site.



Required:
*5 years’ experience, preferably in in military/aerospace, mechanical or electrical design using UG NX 11
*Strong modelling skills
*Experience reading engineering blueprints, schematics.
*AS degree



Pluses:

*Creo experience
*Vehicle designing experience a plus
 
Job Number: 424
Job Location: York, PA
Rate: $50.40
Per Diem: yes split
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Microelectronics Test Technician (2nd Shift)

Description:
A Microelectronics Test Technician (2nd Shift) job in Scottsdale, AZ is currently available through Belcan. In this role, you will be responsible for performing testing on small microelectronics hardware (MCM/Hybrid assemblies). To be considered for this role, you will have an Associates Degree in a related discipline, plus a minimum of 3 years of relevant experience. Due to the nature of the work performed in this facility, US citizenship is required.

Microelectronics Test Technician Job duties:

* Perform RF alignment on hybrid circuits, designed to operate between 8 to 60 GHz.
* Troubleshooting performance and functional technical issues.
* Setup manual tests when requested by test engineering.

Qualifications:

* Has a good understanding of OHMs Law.
* Previous work experience with Die Probing and Microscopes.
* Experienced with using the following RF test equipment: Spectrum Analyzers, Network Analyzers, O-Scopes and Signal Generators.
* Capable of performing VSWR and Return loss measurements and understands their relationships.

If you are interested in this Microelectronics Test Technician job in Scottsdale, AZ, please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

 
Job Number: 298046
Job Location: Scottsdale, AZ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Firm Name: BELCAN TECHSERVICES
Attention: DerrickHart
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
6 Non-Destructive Test (NDT/NDI) Level II Needed

Description:
Seeking aviation/aircraft non-destructive test (NDT/NDI) Level 2
MUST BE US PERSONS
MUST have successfully completed minimum training requirements defined in NAS 410, ATA 105, or ASNT-SNT-TC-1A for a Level 2 inspector in UT and PT.

• Responsible for accomplishing assigned inspection work on space flight system hardware, assemblies and vehicles.
• Conducts inspections utilizing a variety of NDT methods which may include but are not limited to ultrasonic, penetrant, x-ray, eddy-current, and thermal/infrared and laser shearography.
• Properly utilize NDT test equipment and associated tools to successfully interrogate hardware and structures, make decisions as to their acceptability for continued use and keep abreast of new and advanced test equipment.
• Operate manual and automated NDT equipment.
• Shall be required to document inspection results in both paper and electronic forms as well as complete and sign work records in connection with work performed.
• Inspects parts, sub-assemblies and completed assemblies to the extent necessary to determine, accomplish and approve acceptability in accordance with written procedures.
• Will be required to, but not limited to be working on check aircraft.
• Assist with development of procedures and techniques for non-destructive testing of metallic and composite structures.
• Support training of other NDT personnel using hands-on knowledge from the vehicles via different mediums as appropriate.
• Excellent attendance, ability to work overtime, and other shifts as required.

REQUIREMENTS
• Must have successfully completed minimum training requirements defined in NAS 410, ATA 105, or ASNT-SNT-TC-1A for a Level 2 inspector in UT and PT. Training in other NDT methods is desirable.
• Must have recent, documented hours, working as a NDT inspector and have obtained sufficient experience to be certified in accordance with NAS 410, ATA 105, or ASNT-SNT-TC-1A.
• Must have strong working knowledge of composite aircraft and/or aerospace non-destructive testing processes in composite material.
• Ability to conduct inspections with limited supervision.
• Minimum 5 years aviation/aerospace industry experience desired.
• Excellent computer skills. Skilled in working in Microsoft Office applications.
• Experience on narrow body and/or business jet aircraft preferred.
• Experience with composite aircraft is preferred although not required (commercial or military aerospace application).
• Must display maturity of action and judgment.
• Must be able to work under pressure and thrive in a fast-paced environment.
• Good communication skills.
• Ability to read, interpret, and communicate blueprints, specs, and other technical documents.

Physical and/or Additional Requirements
• Perform physical requirements of the position, including use of inspection hand tools, NDT equipment, lift up to 50 lbs., pass eye examination.
• Willing to work overtime, all shifts, travel and be on-call as necessary.

The Structures Company LLC is an AA/EOE.
 
Job Number: 504
Job Location: Mojave, CA
Rate: **DOE**
Per Diem: Yes
Overtime: Possible
Duration: 8+ Months
Start Date: ASAP
Input Date: 09/29/2021
Last Updated: 02/24/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Pilot

Description:
We are seeking an experienced pilot to fill a position for an exciting aerospace company in Nagoya, Japan. Interested candidates should have 4000 or more flight hours as well as experience flying with a Japanese Airline.

Responsibilities of the Pilot
Perform flight tests and flight test related work.
Take part in creating effective training programs.
Provide technical customer support for aviation matters when needed.

Requirements
Japanese Transportation Pilot license
Effective Type 1 Aviation Physical Examination
Aviation English Proficiency Level 4 or higher
Air radio pilot license
4,000 or more hours flight time.
JET aircraft type limited, with more than 1,000 hours of PIC experience at a Japanese airline
Limited take-off weight of 50t or more
 
Job Location: Japan
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Andrew Bondy
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Computer Systems Analyst FL

Description:
Principal Computer Systems Analyst (Job Number: 20000665)
Number of Openings: 1
Location(s): United States-Florida-Melbourne

Shift: 1st Shift
Target Start Date: Mar 28, 2020

Target End Date: Mar 27, 2021

Pay Rate: $45/hr

Work Schedule: 9/80

No Clearance req'd

Essential Functions:

• Develops computer systems specifications that address business requirements and that fit with the companies system architecture standards.
• Establishes and documents system parameters and formats, ensures hardware and software systems compatibility and coordinates and/or modifies system parameters in terms of existing and projected computer capacity and capabilities.
• Revises existing systems and procedures to correct deficiencies and maintain more effective data handling, conversion, input/output requirements, and storage.
• Manages all aspects of ongoing projects and serves as liaison between various stakeholders.
• Reviews status of projects and budgets; manages schedules and prepares status reports.
• Assesses project issues and develops resolutions to meet productivity, quality, and client-satisfaction goals and objectives. Individual will be responsible for managing large and small scale projects for programs and functional homeroom.
• Able to receive requirements at a high level and derive lower level requirements by working directly with internal customers turning complex processes into user-friendly tools.
• Able to perform all phases of the development lifecycle: initial requirements gathering, architecture design, development, testing, and training.
• Cooperate with teammates on best practices and possible re-use of applications.
• Able to juggle multiple assignments and manage changing priorities.
• Strong project management and communications skills are highly desired.


Basic Qualifications:

• Bachelor’s Degree in a Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university and 5+ years of software development experience
• 5+ years of experience in most of the following: C#, MS Visual Studio, ASP.NET, MVC, strong JavaScript (and JavaScript debugging), jQuery, AJAX, XML, Web Services and related technologies, T-SQL and DTS packages for MS SQL Server, MS VBA, SSRS.


Preferred Qualifications:

• 9+ years of experience in machine learning, advanced analytics, and data visualization.
• 2+ years of experience working with statistical process control.
• Working knowledge of Python and ShinyR
• Capable of managing multiple projects at once
• A Master's Degree in a STEM discipline (Science, Technology, Engineering or Mathematics)
• Strong understanding of product quality and statistical process control is a plus.
• Thorough understanding of Aerospace effectivity management principles
• Able to travel at least 10% of the time.
 
Job Number: JK-1838ATO
Job Location: Melbourne, FL
Rate: 45/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Safety Support Engineer

Description:
Description:
COPS Management (required): Work with Propulsion Systems Product Safety Manager (PSM) to understand and pro-actively manage the propeller product line entries into the Control of Process and Safety (COPS) database.
* Review Product Safety Review Board (PSRB) approved COPS inputs, enter into COPS tool and track / facilitate through release process.
* Examine engineering drawings prior to release to ensure alignment between proposed drawing changes and PSRB approved drawing mark-ups.
* Provide targeted COPS searches and extracts on request. PSRB / PSI support

(required):
* Assist with finalizing meeting minutes, coordinating drafting with contractor and final review and approval with the Product Safety Manager Check and update potential safety issue (PSI) and AI databases in coordination with Propulsion Systems PSRB minutes drafting and finalization.
* Perform database queries to support issue management decisions at PSRB and requests from presenters.
* Guide engineers in developing required documentation for safety part approval at the PSRB using product safety management processes and standard work. RRCA Team support

(additional potential tasks):
* Assist in coordination of root cause corrective analysis project by task planning, AI tracking and management, and fault tree development. Safety Risk Analysis

(additional potential tasks):
* Support ongoing needs for Continued Airworthiness Assessment Methodology (CAAM) statistically-based analyses to inform the Propulsions Systems PSRB and the Collins PSB in potential safety issue management decisions for Propellers issues
* Work with investigation teams to identify information required for generating risk models for potential safety issues
* Construct models to assess risk using Continued Airworthiness Assessment Methodology (Ref. FAA AC39.8)-consistent techniques for unaddressed / uncorrected issues and to evaluate effectiveness of possible Corrective Action Plans
* Research historical data to support severity hazard ratio development
* Work with statistician to resolve modeling issues
* Develop and interpret the models and perform peer reviews to ensure the highest possible analysis integrity. Education: BS Engineering or equivalent Required

Experience / Qualifications:
BS degree with 2+ years' experience in industrial or aerospace engineering environment
Excel and database processes and management
Engineering drawing notations and familiarity

Additional Beneficial Experience:
Engineering change control processes
Critical characteristic identification and management
Basic statistics and risk analysis
Ability to use Minitab tool for Weibull analysis
Systems engineering / reliability engineering

Additional Comments:
A desire to understand the relationship of how propeller hardware manufacture and servicing is controlled to ensure the safety of our customers and the flying public is essential. Some experience with Aerospace systems / operation understanding is desirable. Experience with fault tree, Failure Modes and Effects Analysis, and Failure Hazard Analysis methods is a plus.
 
Job Number: 12166
Job Location: Windsor Locks, CT
Rate: 50-72.42
Per Diem: No
Overtime: Possible
Duration: 2 years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Production Planner II ( Clearfield, Utah ) S9705161

Description:
Production Planner II ( Clearfield, Utah ) S9705161
12 Month Contract

**MUST HAVE Active Secret DoD Clearance within 5 ½ years of last investigation**

Job Description:
Plans sequence of fabrication, assembly, installation, and other manufacturing operations relating to specific portion of the product for guidance of production workers. Plans detail operations from blueprints, engineering orders, change notices, and other engineering releases. Determines the need for tooling and makes recommendations for the design and planning of required tools. Prepares shop work orders for materials and product processing and coordinates with schedulers to ensure that items are being processed according to specifications and time requirements. Maintains progress reports, schedules, and other related records.

Basic Qualifications:
• Active Secret DoD Clearance within 5 ½ years of last investigation
• Experience in working with aerospace specifications and drawings
• Experience in the areas of composite hand layup, bonding, cure, fastened assembly, subsystems installation, metallic hardware or machining experience
• Excellent computer skills. Skilled in working with Microsoft Office applications.
• Experience authoring manufacturing procedures
• Experience authoring manufacturing procedures both electronic and paper
• Experience creating and maintaining MBOMs
• Functional knowledge of production control systems (SAP/Visual Mfg/etc)
• CAD experience (CATIA or NX)

Preferred Qualifications:
• Experience in the use of NX 10 or higher
 
Job Number: S9705161
Job Location: Clearfield, UT
Rate: Open
Per Diem: No
Overtime: yes
Duration: 12 Month
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: TIMOTHY MAHANEY
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer (Test Cell)

Description:
A Project Engineer (Test Cell) in San Antonio, Texas is currently available through Belcan with one of our Aerospace clients. You will be responsible for the maintenance and upgrading of Gas Turbine Engine Test Cells. To be considered for this role, you will need a Bachelor's Degree in Mechanical, Electrical or Computer Engineering and 5+ years' experience gas turbine test cell design. This is a great Direct/Full-time opportunity with a growing company.

Project Engineer (Test Cell) Job duties:

* Maintenance and upgrading of Gas Turbine Engine Test Cells
* Facility design and systems design that support the test facilities.
* Work with computer, electrical and mechanical engineers/technologists to create systems that are accurate, maintainable and easy to operate.
* Design and implementation of these test systems including estimating, requirements gathering, technical analysis, troubleshooting, component selection/purchasing, commissioning and production support.
* Provide support to troubleshoot and repair test cell issues.
Based on knowledge of successful candidate:
Electrical / Computer Engineer
* Develop software for Engine Test Cell data acquisition and control using C# (.NET Framework), and LabVIEW.
* Design test cell electrical systems and develop electrical schematics.
* Troubleshoot and repair test cell electrical systems and harnesses
Mechanical Engineer
* Design and implement mechanical control systems including oil packages, fuel systems, air start control systems, etc.
* Work with Ladder logic to develop engine control systems
* Troubleshoot and repair test cell mechanical systems.

Qualifications:

* Bachelor's Degree in Mechanical, Electrical or Computer Engineering
* 5+ years' experience gas turbine test cell design.
* Proficient with AutoCAD
* Working knowledge of Word, Excel, Power Point, Project and Outlook.
* Must be authorized to work in the United States. Must be a U.S. Person as defined by ITAR/EAR.

If you are interested in this Project Engineer (Test Cell) in San Antonio, Texas, please apply via the 'apply now' link provided. Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.


 
Job Number: 298900
Job Location: San Antonio, TX
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Manager - Aerospace

Description:
We are seeking an aerospace project management expert to fill an opening with a company in Nagoya, Japan. Interested candidates should have 10 plus years of aerospace related experience including certification knowledge as well as exceptional leadership and project management skills.

Responsibilities of the Project Manager

Perform all Project Management duties required to finalize aircraft development and Type Certification and Entry into Service.
Provide evaluation of current aircraft design status until Type Certification is granted by the main certification agencies.
Preparation and maintenance of a General Schedule for all activities in the group in consistency with the Master Schedule.
Preparation of lower level schedules and support for sub-group leads in assignment of resources.
Continuous understanding of progress of supplier’s activities to ensure consistency with program schedules.
Keep management and relevant members of the team informed on progress of significant activities.
Planning and coordinating integration of design change activities.
Understand all assigned systems contract requirements in support of suppliers.
Provide expertise scheduled activities related to solving planning issues and concerns raised during any testing, Flight testing or otherwise.
Manage and monitor overall project budget with support from financial controller.
Identify, manage and follow up project risk, issues and opportunities.
Establish and maintain proper communication with assigned IPT team, provide guidance to IPT team meet project commitments and deliverables in order to secure program schedule.

Requirements of the Project Manager

Minimum 10-years of experience in aerospace required.
Strong skills and experience coordinating with other division and leading projects.
Aircraft systems and/or project management experience.
Excellent overall knowledge about aircraft manufacturing and certification program.
Prior experience creating governance structure and KPI.
Have high level communication skills, energetic and driven to complete projects.
Proficiency with MS Project and MS Excel.
PMP certification and cost/budget management is preferred.
Candidates must be fluent in both written and spoken English.
 
Job Location: Japan
Duration: 2 Years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Inspector IV ( Dulles, VA ) 9572942

Description:
Quality Inspector IV ( Dulles, VA ) 9567561 and 9567413 and 9572500 and 9572942
6 Month Contract

Pay rate: $35 - $40/hr W2

Prior aerospace inspection skills
Job# 9567561 and 9567413 and 9572500 POSITION IS FOR 1st SHIFT
Job# 9572942 POSITION IS FOR 2ND SHIFT

**Top 3: Mechanical or electrical piece part inspection experience, good computer skills, good technical writing skills. team: Receiving Inspection work center currently consists of 5 other QAI’s who perform inspections on various types of piece parts and assemblies that we have procured from other suppliers.

Description:
1. Perform in-process and final inspections on product throughout the SMF work centers (Receiving, Manufacturing, Integration and Test) and perform product build documentation review and end-item data package review.
2. Perform detailed inspections on both EEE and Mechanical components at the piece part level as well as the assembly and sub-assembly level.
3. Uphold quality standards and workmanship practices in assigned work centers by learning/practicing process specifications and employing quality workmanship standards during everyday job functions.
4. Generate nonconformance reports for discrepancies discovered during inspection processes.
5. Perform audits of work areas to ensure compliance with Orbital Sciences Corporations ISO 9001/AS 9100 procedures and Lean Manufacturing Principles.
6. Perform in-depth reviews of product build documentation for configuration audit to determine if as-built meets as-designed.

Prerequisites:
1. Must be able to read engineering documentation and inspect to drawings and parts lists, inspection plans, and supplemental instructions
2. Minimum 5 years experience in Quality Assurance or relevant experience in Electrical or Mechanical field of work in performance of technical job function
3. Able to use Microsoft applications and ability to learn new computer programs/applications easily.
4. Basic technical writing skills are required

Desirables:
1. Associates (2 year) degree from accredited institution
2. Knowledge in Mechanical, Electrical, or Radio Frequency (RF) Engineering is a plus.
3. Working knowledge of TIPQA and/or Costpoint database applications
4. Knowledge in how to read schematics and wirelists is a plus 5. Previous experience working in ISO-certified company
 
Job Number: 9572942
Job Location: Dulles, VA
Rate: 35-40
Per Diem: Yes
Overtime: yes
Duration: 6 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Receiving Inspector

Description:
We are looking for a great Inspector for an Aerospace Company in Los Angeles County.

• Perform First Article Inspections
• High school diploma or GED required
• Knowledge of AS9100 and other relevant aerospace industry standards.
• 2+ years of experience in a manufacturing environment, preferably aerospace, or equivalent education and experience. Previous inspection experience a definite plus.
• Ability to work with Microsoft tools, CATIA, 2D and 3D drawings or computer generated models or other similar types of engineering data.
• Basic math and technical writing skills.
Proven hands-on inspection experience in the aerospace industry using a variety of precision measurement tools.
• GD&T comprehension through experience and/or formal training.
• In depth understanding of the inspection techniques and quality issues associated with composites.
• Attention to detail and follow through.
• Ability to communicate effectively with all levels of company personnel.
• Specific vision abilities (corrected or uncorrected) required for this job include color perception, close vision, distance vision, peripheral vision, depth perception and ability to adjust focus.
• Must be able to lift 50 pounds (unassisted).

The Spaceship Company, LLC AA/EOE
 
Job Location: Los Angeles
Rate: $17-$20
Overtime: Possible
Duration: Temp to Perm
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
SQA Sr. Test Engineer

Description:
An SQA Sr. Test Engineer job in Pittsfield, MA is currently available through Belcan. In this role, you will be responsible for developing test cases/procedures based on the scope provided by the SQA project lead(s). To be considered for this role, you will have a Bachelor's degree in Engineering, or a related specialized area or field, plus a minimum of 2 years of relevant experience. A current active Department of Defense Secret security clearance is required at the time of hire.

SQA Sr. Test Engineer Job duties:

* Working through the Ready For Test Review(s) (RTR) and the Results Review(s) (RR).
* Working to the schedule assigned by the SQA Project Lead(s) - and also communicating as early as possible if a schedule will not be met.
* Communicating to each Project Lead regarding workload when working on projects spread across more than one Project Lead.
* Documenting issues found in testing on a Change Request (CR) (Change/CONDOR) (SQA Test Architect (TA)/SQA Project Lead review before submitting).
* Keeping Dynamic Object Oriented Requirement System (DOORS) test plans up to date at the conclusion of a lab shift - SQA Project Leads require this data to be up-to-date.

Qualifications:

* Considerable knowledge and experience with object oriented programming, system processes and scripting languages.
* Considerable knowledge in use and understanding of test engineering concepts, principals and theories.
* Willingly considers new ideas and perspectives, eager to learn and grow professionally.
* Considerable ability to communicate issues and alternatives clearly.

If you are interested in this SQA Sr. Test Engineer job in Pittsfield, MA, please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

 
Job Number: 298475
Job Location: Pittsfield, MA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Firm Name: BELCAN TECHSERVICES
Attention: BrianVidetic
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Scrum Master

Description:
Minimum Qualification:
Must be able to communicate effectively and work in a team environment is required
• Bachelor’s Degree in Computer Science, Information Systems, Business Administration or related discipline or equivalent experience.
• Minimum 3 - 5 years of Agile project management or solution delivery experience, within the Defense and Aerospace industries preferably, but not required.
• Intimate knowledge and understanding of Agile mindset and Scrum, Kanban framework
• Experience implementing best Agile practices and standards, and mentoring/teaching junior practitioners
• Scrum Master certification (e.g. CSM, PSM, and SSM) is required, and additional SAFe certifications are preferred
• Experience with Agile tools (e.g. Jira, Rally, Confluence, EasyBI etc.) is required
 
Job Number: 16568
Job Location: Greenville, TX
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Secondary Flight Control Systemd Compliance Engineer

Description:
We are seeking an experienced Compliance Engineer to fill a position for an aerospace company here in Nagoya, Japan. Interested candidates should have 10 plus years of Compliance experience as well as Secondary Flight Control Systems experience.

Responsibilities of the the Secondary Flight Control Systems Compliance Engineer

Evaluate the current aircraft design, with respect to compliance of the Secondary Flight Control System as required by airworthiness regulations.
Conduct verification and showing-compliance activities, such as Design Reviews, inspections and analysis.
Conduct tests, witness tests and creating test reports.
Work closely with the other team members to identify and escalate aircraft and program certification Issues to management.
Review certification documents, including CPs, compliance reports, and IP/CRI/CAI positions, as an independent checker to ensure quality of certification products, prior to regulatory review.
Support alignment of company proposals to globally accepted standards for certification and compliance.
Conduct coordination with related parties such as JCAB, FAA and EASA.
Manage the scheduling of all certification activities.

Requirements

Excellent working experience in commercial aerospace.
4 year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation)​
10 plus years of experience as Compliance Engineer for Secondary Flight Controls Systems.
Excellent communication skills.
 
Job Location: Japan
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Andrew Bondy
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Compliance Engineer

Description:
We are currently seeking an experienced Compliance Engineer to fill an opening with a progressive aerospace company in Nagoya, Japan. Interested candidates should have 10 plus years experience with Aerospace Program Development and Certification.

Responsibilities of the Compliance Engineer
Develop sustainable and executable certification standards and guidelines as well as means of compliance.
Resolve complex compliance issues and difficulties.
Establish consistent standards for design compliance.
Build and maintain a strong relationship JCAB and FCAA representative.
Develop training standards for the companies engineering compliance personnel.
Coordinate activities between engineering and certification process teams.
Manage the implementation of Continued Operational Safety Process (COSP).

Requirements
10 plus years of engineering experience in assigned function, including development programs as well as aircraft certification.
Proficient with certification requirements and compliance standards including Part 21, 25 and ACs/AMCs.
Significant experience dealing with aviation regulators to support certification goals.
Experience resolving cross-functional engineering compliance issues
Knowledge of the aviation industry's roles in rule-making and compliance
Proven leadership and solid communication skills.
 
Job Location: Japan
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Andrew Bondy
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Design Checker Engineer

Description:
Seeking a PCB and CCA Quality Check Engineer to support multiple programs. The ideal candidate will perform quality checks on circuit board layouts using CAD software to verify that the design meets certain performance and producibility requirements.

The primary responsibilities of this position will include, but not be limited to:
• Works independently and as part of a team to achieve the assigned objectives.
• Use Mentor Valor NPI software to analyze printed circuit designs and generate reports.
• Ability to interpret and have a working understanding of Electronic Engineering drawings
• Check and generate assembly drawings and fab/drill drawings with a very high degree of accuracy.
• Demonstrates a very high level of accuracy in all work performed.
• Effectively communicate PCB design improvement recommendations to the Design Layout team and Engineering.
• Provides input and feedback to engineering and other functional teams in support towards the success of the projects.
• Work with external customers, Engineering, and Supply Chain to resolve any design or interpretation issues.
• Updates the Engineering Design Rules & Standards documents and checklists to capture lessons-learned and changes brought about through external specifications, industry standards and customer driven requirements.
• Provides technical leadership and knowledge in the application and support of PCB design software, design guides and rules.

Required Skills:
• Minimum 2 years’ experience with analysis/checking responsibilities in the Electronics Assembly and Fabrication industry.
• Must be familiar with applicable industry (IPC) design and end product performance standards for circuit card assemblies and printed wiring boards including IPC-6012, IPC-2221, J-STD-001, IPC-7351
• Proficient in viewing ODB++/Gerbers data, PCB assembly and fabrication drawings, and Knowledge of Electronic Components and concepts.
• Proficient in Engineering Drafting principles defined in ASME specifications
• Good mathematics aptitude and very detailed oriented.
• Must have Excellent Computers skills: - EXCEL, WORD, OUTLOOK & other office suites.
• Excellent written and verbal communication skills.
• Understanding of Printed Circuit Board fabrication: material selection, stack up, HDI and/or processes
• Ability to communicate technical knowledge and document descriptions of technical solutions for CCA and PWB technology products.
• Ability to work in multiple discipline integrated product development team environments to successfully execute tasks and deliver high quality work products.

The position requires multi-tasking to support several programs concurrently and will require local travel between sites and also some remote travel as required.

Must be a US Citizen and have ability to obtain a DOD Security Clearance

Desired Skills:
• Must have a professional demeanor and strong interest in providing excellent customer service.
• Ability to learn new skills and tasks as required, especially using software applications for PCB & Assembly industry, such as Valor NPI, Mentor Expedition, BluePrint (Downstream Technologies).
• Excellent customers service skills with a sense of urgency.
• Must be highly organized, self-motivated, and able to multi-task.
• Ability to perform at the highest level in a fast-paced environment.
• Experience laying out printed circuit boards using Expedition CAD software.
• Familiarity with design tools for printed wiring board and circuit card assembly technologies (Mentor xDM, Mentor Expedition, Blueprint, VALOR NPI, etc.)
• Familiarity with PWB/CCA technology Manufacturing Design Rules and Guidelines (MDRGs)
• Prior experience designing, and / or supporting aerospace/defense related products
• Expertise in component selection for military and aerospace environments
• IPC CID or CID+ certification
• Existing Security Clearance

Required Education:
• 8 years with Associates Degree or other advanced degree in a related field

Desired Education:
• 6 years of industry experience as a Checker with Bachelors’ Degree or advanced degree in a related field
 
Job Number: 2010111370
Job Location: McKinney, TX
Per Diem: split
Overtime: possible
Duration: 3+ months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Manager, Loads & Dynamics

Description:
General Summary:

The Senior Manager for Loads will be responsible for people, processes, and tools to meet the current and future Aircraft Loads analysis needs of the Aircraft sustainment and future development programs. Will be responsible for determination of flight and ground static and fatigue loads of airframe components, assemblies and systems, to ensure aircraft design is structurally sound and meets all regulatory and company requirements related to structural strength and fatigue.

Duties and Responsibilities:
In this role you will be responsible for guiding the loads analysis team along with defining and validating aircraft flight and ground loads through simulation/calculation using established theory and methods.


Qualifications
Education, Work Experience, Certification and/or Licensure:
• BS degree in Aeronautical, Aerospace or Mechanical Engineering required, MS degree or PhD in Aeronautical or Aerospace Engineering is preferred
• Applicant shall possess a minimum of 10 years’ experience in aircraft external Loads analysis and 6 years leading teams
• Excellent communication skills both written and verbal
• Experience and demonstrated proficiency in Unix/Linux, FORTRAN, C/C++, MATLAB, VBA, MSC/NASTRAN, MSC/PATRAN, MSC/FLIGHTLOADS is required. Python experience and/or proficiency is desirable.
• Travel required 25% or less.


Knowledge, Skills and Abilities:
• Knowledge of static maneuvers, static ground, control surface component loads, component pressure loads development, and ground support equipment loads, along with experience in dynamic loads, such as tuned gust, PSD, equipment design accelerations, and dynamic landing loads per FAR/EASA requirements. Experience with turbine engine fan blade out, emergency landing loads per FAR/EASA requirements, as well as flutter and vibratory analysis, is desirable.
• Knowledge of, and experience with, FAA FAR 23 and EASA CS 23 Loads regulatory requirements and means of compliance is required, and experience with FAA FAR 25 and EASA CS 25 Loads regulatory requirements and means of compliance is desirable.
• Organize, schedule and effectively coordinate work packages / phases, and lead less experienced team members in loads analysis tasks.
• Must be proficient in generating documentation to support certification efforts related to external loads.
• Knowledge of, and experience with, aeroelastic principles and concepts, including but not limited to static aeroelastic analysis including divergence and control reversal, is required.
• Knowledge of, and experience with, dynamic aeroelastic analysis is desirable. Demonstrated knowledge of FEA and doublet-lattice aero modeling techniques, particularly in MSC/NASTRAN, is desirable.
• Strong knowledge of CFD principles and CFD-based modeling, along with wind tunnel test data usage for Loads analysis, is required. Applicant must be able to communicate aerodynamic, structures and systems discipline input needs to ensure accurate load set development and conveyance.
• Good fundamental knowledge of mass properties principles as they relate to loads analysis
• Knowledge and experience with cable-driven / mass-balanced flight control systems required including limited-authority servo systems, and knowledge of, and experience with, advanced flight control architectures including full-authority actuator systems, is desirable.
• Strong knowledge of flight test data analysis related to structural design loads substantiation, as well as a demonstrated ability or experience with development of computational methods relating to loads analysis.



The Structures Company is an AA/EOE.
 
Job Number: 362
Job Location: NC
Rate: $147-$170K **DOE**
Duration: DIRECT POSITION
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Principal Engineer ( Clearfield, Utah ) S9778040

Description:
Senior Principal Engineer ( Clearfield, Utah ) S9778040
12 Month Contract

Pay Rate: Open

Sr. Principal Composites Analysis and Test Engineer Materials to join our team in our Clearfield, UT offices.

**MUST HAVE AN ACTIVE SECURITY CLEARANCE TO BE CONSIDERED FOR THIS ROLE with last investigation within the last 4.5 years.

Role description & Responsibilities:
Highly motivated analysis engineer with composite structures experience for military and/or commercial aircraft.
Responsibilities include but are not limited to static and dynamic analysis of composite structures, bonded and bolted assemblies

The candidate also have experience with composite material mechanical characterization and dynamic testing (modal, forced vibe acoustic etc.) of coupon and sub-elements.

Ability to define and lead characterization and test activities, including: authoring test plans and test reports, data reduction and calculation of material allowables.

Experience Preferred:
• Previous experience in aerospace manufacturing facility
• Proficiency with NX, Catia V5, Fibersim, Altair Hyperworks/Optistruct, and Hypersizer are also desirable
• Definition of layups and ply patterns with Fibersim to generate finite element models
• Requirements definition and verification
• Constitutive Model Development and implementation
 
Job Number: S9778040
Job Location: Clearfield, UT
Rate: Open
Per Diem: No
Overtime: yes
Duration: 12 Month
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Software Engineer

Description:
Senior Software Engineer

Burnsville, MN
$68/hr
9 month W2 contract
First Shift
*MUST BE A U.S. CITIZEN OR PERMANENT*

Description:
Senior Software Engineer. Development of Verification and Validation Test Cases and Procedures for an Aerospace DO-178C DAL A project.

Work with a team of 12 design and verification engineers to create software verification artifacts and peer review other engineer's work.

MS or BS in Engineering/Computer Science Degree Engineering experience developing safety critical embedded software products in a regulated industry (e.g. Aerospace, Medical, Automotive) 6+ years' experience in embedded software verification Strong communication skills.
 
Job Number: 12070
Job Location: Burnsville, MN
Rate: 68.00
Per Diem: No
Overtime: Possible
Duration: 9 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. IT Systems Administrator

Description:
A Sr. IT Systems Administrator job in Dedham, MA is currently available through Belcan. In this role, you will be responsible for managing the functionality and efficiency of a group of computers running on one or more operating systems. To be considered for this role, you will have a B.S. degree in Computer Science, a related technical field, plus a minimum of 5 years of relevant experience. A current active Department of Defense Secret (must be SCI eligible) security clearance is required at the time of hire.

Sr. IT Systems Administrator Job duties:

* Maintains the integrity and security of servers and systems.
* Serves as a front line interface to users with technical issues.
* Makes recommendations for hardware and software purchases.
* Conducts systems analysis and development to keep systems current with changing technologies.
* Duties may include installing new software, troubleshooting, granting permissions to applications and training users.

Qualifications:

* Requires a solid understanding of Server based operating systems.
* As the Subject Matter Expert have the ability to mentor others on administrating the server environment.
* Enhanced troubleshooting skills within the Server OS as well as both networking and storage technologies.
* Must have hands-on experience developing, deploying and supporting large-scale enterprise server solutions.

If you are interested in this Sr. IT Systems Administrator job in Dedham, MA, please apply via the link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

 
Job Number: 298819
Job Location: Dedham, MA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Firm Name: BELCAN TECHSERVICES
Attention: DerrickHart
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Process / Welding Engineer

Description:
** Candidates must be U.S. Citizens without Dual Citizenship **
** This is a Temp-to-Hire position. If the selected candidates perform well they will be converted to direct employees **
** Candidates must be able to interview in-person at their own expense if not local **

Duties:
50% - Oversee and troubleshoot critical weldments ensuring best practices for weld fit-up, cleanliness requirements and weld parameters are followed.
15% - Develop weld parameters and document best practices to support production.
15% - Perform statistical process analysis of welding processes.
10% - Define weld machine/specification requirements.
5% - Perform root cause analysis and disposition discrepant hardware.
5% - Accurately report problems, solutions, and results, in concise written and oral communications. Communicate effectively between team members and customer counterparts.

Skills:
1. Experience working with Torch Weld Jigs (TWJ), setting weldments up for exact shrinkages to fit TWJ post weld.
2. Experience dispositioning hardware and performing root cause analysis.
3. Process capability and statistical analysis experience.
4. Previous experience developing weld parameters for manual and In-Place-Tube or Automatic G.T.A. welding or E.B. welding.
5. Familiarity working with electronic planning, drawings, and pertinent documents such as weld parameters.
6. Demonstrated teaming skills.
7. Strong analytical and communication skills (written and oral) are required, along with the ability to lead teams and work in a collaborative team environment.
8. Experience using appropriate PPE.

Experience with the following is a plus:
1. Working with D17.1 or Journeyman Weld certifications.
2. Writing weld machine specifications.
3. Using electronic planning and drawings.
4. Moving large structures or hardware.

Education:
1. Requires a Bachelor's degree in Weld Engineering, Mechanical Engineer, Industrial Technology and 5 years of experience in aerospace working with nickel, stainless, ferrous and aluminum alloys, or an equivalent combination of education and experience.
 
Job Number: 12216
Job Location: Canoga Park, CA
Rate: $37.00 - $43.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: Temp-to-Hire
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Circuit Design 5 CA

Description:
168015 Staff Engineer Digital (Job Number: 20004179)
Number of Openings: 4
Location(s): United States-California-Redondo Beach

Shift: 1st Shift
Target Start Date: Apr 13, 2020

Target End Date: Apr 9, 2021

Pay Rate: $85 to $90/hr
Work Schedule: 9/80
Duration of Assignment: Up to 1 year

Aerospace Systems is seeking an Engineer Circuit Design 5 based in Redondo Beach, CA.

This person will join the Digital Products Department. The ideal candidate is an Engineer experienced in unit level (i.e. box) development. This person will work on developing test plans for MODEMs, routers and other types of communications hardware for air and space applications.

The responsibilities of this position include requirements assessment, developing verification plans, architecting and implementing verification environments, writing and executing tests, and documenting verification results to support requirements selloff. Candidate must have digital verification expertise.

Basic Qualifications:
- Bachelor's degree in a STEM discipline
- Minimum 14 years of relevant Verification experience
OR Master's degree plus 12 years of experience.

Preferred Qualifications:
- Familiarity with DOORs
- Familiarity with VHDL coding & verification
 
Job Number: JK-1845ATO
Job Location: Redondo Beach, CA
Rate: 90/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Staff Engineer ASIC CA

Description:
Staff Engineer ASIC (Job Number: 19038746)
Number of Openings: 2
Location(s): United States-California-Redondo Beach

Shift: 1st Shift
Target Start Date: Feb 24, 2020

Target End Date: Feb 19, 2021

Pay Rate: $90/hr
Work Schedule: 9/80
Duration of Assignment: Up to 1 year

Aerospace Systems is seeking an Engineer Circuit Design 5 based in Redondo Beach, CA.

This person will join the Digital Products Department. The ideal candidate is an Engineer experienced in Modeling and Verification. This person will work on multi-million gate ASIC and FPGA developments in the areas of digital communications, signal processing, network routing, embedded processors and switching applications for air and space applications.

The responsibilities of this position include developing verification plans, architecting and implementing verification environments, writing and executing tests, and documenting verification results to support requirements selloff. Candidate must have digital verification expertise using advanced verification methodologies and techniques including constrained-random verification using System Verilog and OVM/UVM, assertions and functional coverage using PSL or SVA, and modeling using C/C++, System Verilog, or System C.

Qualifications

Basic Qualifications:
- Bachelor's degree in a STEM discipline
- Minimum 14 years of relevant Verification using System Verilog and OVM/UVM
OR Master's degree plus 12 years of experience.


Preferred Qualifications:
- Mentor Questa simulator, VHDL or Verilog, PSL or SVA, C/C++, System C
- Familiarity with VHDL coding
 
Job Number: JK-1841ATO
Job Location: Redondo Beach, CA
Rate: 90/hr max
Per Diem: pd split possible
Duration: 1 year
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Staff Structural Analysis Engineer / 2nd shift / Nastran Patran FEM analysis DaDT - no clearance CA

Description:
167042 Staff Structural Engineer (Job Number: 19035635 or 19035638)

Number of Openings: 2

Location(s): United States-California-Palmdale


Shift: 2nd Shift

Target Start Date: Mar 16, 2020

Target End Date: Mar 12, 2021

Pay Rate: $80 to $85/hr

Work Schedule: 4/10 - 2nd Shift

Duration of Assignment: Up to 1 year

2 Openings

Successful candidate will be a member of the F-35 Center Fuselage IPT, supporting the assembly of the Center Fuselage at Northrop Grumman's Palmdale Manufacturing Center. Candidate should be experienced in structural analysis methods, including large NASTRAN models, of metallics and advanced composite structures. Desired skills include familiarity with detailed analysis procedures, FEM analysis, PATRAN, layout sizing, structural integrity evaluations, durability and damage tolerance (DaDT) of aircraft structures, material allowables development, acoustic/dynamic evaluations, and weight control. Responsible for liaison support as well as analysis of parts and installation of these parts in the JSF Center Fuselage. Experience should include the development and first-hand assembly line support of aircraft structural parts and assemblies (launch vehicle experience considered) utilizing metallic/composite materials.

Basic Qualifications:

Bachelors Degree plus 14 years of experience in Aerospace, Mechanical, or Civil Engineering or Masters Degree plus 12 years years experience.


Preferred Qualifications:

Previous experience in structural analysis of fighter aircraft structures preferred
 
Job Number: JK-1828
Job Location: Palmdale, CA
Rate: 80-85/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Staff Structural Engineer / 2nd shift / structural analysis of fighter aircraft structures - no clearance CA

Description:
Staff Structural Engineer (Job Number: 20004057, 20004060)
Number of Openings: 1
Location(s): United States-California-Palmdale

Shift: 2nd Shift
Target Start Date: Mar 16, 2020

Target End Date: Mar 12, 2021

Pay Rate: $80 to $85/hr
Work Schedule: 4/10 - 2nd Shift
Duration of Assignment: Up to 1 year

Successful candidate will be a member of the F-35 Center Fuselage IPT, supporting the assembly of the Center Fuselage at the Palmdale Manufacturing Center. Candidate should be experienced in structural analysis methods, including large NASTRAN models, of metallics and advanced composite structures. Desired skills include familiarity with detailed analysis procedures, FEM analysis, PATRAN, layout sizing, structural integrity evaluations, durability and damage tolerance (DaDT) of aircraft structures, material allowables development, acoustic/dynamic evaluations, and weight control. Responsible for liaison support as well as analysis of parts and installation of these parts in the JSF Center Fuselage. Experience should include the development and first-hand assembly line support of aircraft structural parts and assemblies (launch vehicle experience considered) utilizing metallic/composite materials.

Basic Qualifications:

Bachelors Degree plus 14 years of experience in Aerospace, Mechanical, or Civil Engineering or Masters Degree plus 12 years years experience.

Previous experience in structural analysis of fighter aircraft structures preferred
 
Job Number: JK-1844
Job Location: Palmdale, CA
Rate: 80-85/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Analyst Engineer

Description:
MUST BE US PERSONS.
BS Degree a MUST.
FEMAP is a plus but not required.
Strong classical analysis/hand calcs a MUST.

REQUIRED SKILLS AND ABILITIES:
1. Familiarity with Federal Aviation Regulations (FARs) governing aircraft certification.
2. Strong understanding of aircraft structural modifications (both interior and airframe).
3. Strong command of classical hand-analysis techniques.
4. Proficient with the following software:
a. Microsoft Word, Excel, PowerPoint, Outlook, and Internet Explorer.
b. NASTRAN/FEMAP(basic user skill, proficiency a plus)
c. AutoCAD (basic user skill, proficiency a plus)
d. SolidWorks (basic user skill, proficiency a plus)
e. Visual Basic or other coding skills a plus
Final 1-2017
5. Strong knowledge of Finite Element Modeling and Analysis techniques.
6. Ability to interpret design drawings of various aircraft modifications and identify design changes required to
ensure that sound load paths and structural integrity are maintained.

MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
1. Bachelor’s Degree in Aerospace, Aeronautical, or Mechanical Engineering or the equivalent.
2. Five (5) or more years of experience working in aircraft stress analysis - airframe or interiors/completions on transport category aircraft, installation designs, including but not limited to Supplemental Type Certificate (STC) work, structural
substantiation analysis and report development, aircraft modification designs under 14 CFR Part 25 STC
projects, and test plans and test report authoring and review.

The Structures Company LLC is an AA/EOE.
 
Job Number: 358
Job Location: IN
Rate: $65/Hr. **DOE**
Per Diem: Yes
Overtime: Possible
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineers / Stress Analysts Needed

Description:
Airframe stress analysis and sizing of major aircraft structural components for CFR 14, Part 25 and EASA CS-25 certification.
Support internal loads development and coordination of airframe stiffness updates between major structural components/suppliers.
Support development of analysis methods and tools for design/manufacture/testing/certification.
Support Tier 1 Supplier/Partner analysis and oversight of methods.
Support design reviews and model releases for all structural interfaces within an IPT environment.

Requirements:
Must be a US or Canadian citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772.
8+ years of experience in performing stress analysis, developing methods or performing validation testing for Part 25 aircraft components.
Must have a bachelor’s degree in Aerospace or Mechanical Engineering, or similarly related area.
Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure / confidentiality agreement with current or any former employer that would prevent you from fully performing the duties of the position.
Knowledge of the conceptual and preliminary design phases of aircraft development is strongly preferred.
Knowledge of structural static, durability and damage tolerance requirements for Part 25 certification strongly preferred.
Highly self-motivated with a strong bias for action, and excellent problem-solving skills across multi-disciplinary skill sets.

The Structures Company, LLC is an AA/EOE.
 
Job Location: Reno, NV
Rate: Open
Per Diem: Yes
Overtime: Possible
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer ( Clearfield, Utah ) S9271202

Description:
Structural Analysis Engineer ( Clearfield, Utah ) S9271202
12 Month Contract

Pay Rate: $70-80 /hr W2, maybe more for the right candidate

**MUST HAVE AN ACTIVE SECRET CLEARANCE

Currently seeking a Principal Composite Structure Analysis Engineer to join our team in our Clearfield, UT offices.
Candidate must have had their last investigation within the last 4 1/2 years. Role description & Responsibilities: Highly motivated analysis engineer with composite structures experience for military and/or commercial aircraft. Responsibilities include but are not limited to static and dynamic analysis of composite structures, bonded and bolted assemblies The candidate also have experience with composite material mechanical characterization and dynamic testing (modal, forced vibe acoustic etc.) of coupon and subelements. Ability to define and lead characterization and test activities, including: authoring test plans and test reports, data reduction and calculation of material allowables.

Experience Requirements:
**MUST HAVE AN ACTIVE SECURITY CLEARANCE TO BE CONSIDERED FOR THIS ROLE (Candidate must have had their last investigation within the last 4 1/2 years.)

** BS in Civil, Mechanical, or Aerospace Engineering or related with a minimum of 8 years related experience in analysis engineering function.
Minimum of 8 years of experience with Nastran or ABAQUS Static, dynamic and thermostructural analysis experience Test lab experience, including instrumentation and data reduction Knowledge of composite materials and manufacturing processes Excellent oral and written communication skills Ability to work in a fast paced dynamic environment as part of a multi-discipline team

Experience Preferred:
Previous experience in aerospace manufacturing facility Proficiency with NX, Catia V5, Fibersim, Altair Hyperworks/Optistruct, and Hypersizer are also desirable • Definition of layups and ply patterns with Fibersim to generate finite element models, Requirements definition and verification Constitutive Model Development and implementation

Skills & Qualifications: Strong interpersonal skills with the ability to work with a team Excellent communication skills. Ability to make sound decisions Ability to multi-task Ability to prioritize and manage time effectively Education/Certifications: BS degree in Civil, Mechanical, Aerospace Engineering, or related
 
Job Number: S9271202
Job Location: Clearfield, UT
Rate: Open
Per Diem: no
Overtime: yes
Duration: 12 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer - CPD Or Fibersim Experience Required

Description:
Description
Develops CATIA 3D models, CPD definition, and 2D engineering definition for detail parts, assemblies, and installations
Establishes manufacturing tolerances for production of structural components
Develops and documents requirements and interface constraints for components
Coordinates with the structural substantiation department to ensure component performance in flight environments
Supports test definition to verify that components and manufacturing processes meet design intent and engineering requirements
Participates in the review, approval, and release process of engineering definition
Supports creation and review of manufacturing plans to ensure compliance with design requirements and company processes
Supports components throughout full lifecycle from prototype to final acceptance as well as modifications and repairs after installation
Uses engineering judgment to evaluate manufacturing issues and disposition nonconformance reports (NCR)


Qualifications
Bachelor’s degree from an accredited institution, with a concentration in Aeronautical, Astronautical, Aerospace, or Mechanical Engineering
3 years or more experience in structural design engineering for aerospace composite fabrication and assembly processes
Proficient with CATIA V5
Experience with Composite Part Design (CPD), or Fibersim. Assembly Design, Sketcher, Drafting, Wireframe, Surface Design
Experience with Generative Shape Design (GSD), GD&T and ASME Y14.5M-1994 drafting standards
Knowledge of manufacturing methods for various materials (composite layup, metal machining, 3D printing, bonded assembly, mechanical assembly)
Experience designing for aerospace environments
Experience in the development of human spaceflight hardware desired
Experience with Product Lifecycle Management (PLM) software and configuration management processes
Excellent analytical and decision-making skills
Excellent verbal and written communication skills. Excellent organizational and time-management skills Strong team player.
Proficient in Microsoft Office: Word, Excel, PowerPoint, Outlook

The Structures Company is an AA/EOE.
 
Job Number: 265
Job Location: Mojave, CA
Rate: $65-$70/Hr. **DOE**
Per Diem: Yes
Overtime: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Engineer

Description:
Position Summary:

Design complex, standard or custom, mechanical and structural airframe installation packages in new AHI aircraft. Create engineering drawings, interface with pertinent stakeholders in certification, production and flight test, support fleet sustainment activities and/or support STC projects.

This assignment is expected to be approximately 12-18 months in duration.

Primary Responsibilities:

Detail Design: 50%
Create detail/assembly/installation drawings for new helicopter completions and STC projects.
Review and facilitate engineering package release.
Works with groups of engineers to complete projects.
Works under general supervision from the Lead engineer
Follows established procedures
Work is reviewed for soundness of technical judgement, overall adequacy and accuracy
Project Coordination: 20%
Coordinates essential information into the configuration management system listing mechanical and structural installations for each aircraft unit produced by AHI
Participate in developing pricing information based on installation effort and provide quotes to AHI Marketing Department for standard and custom options on new aircraft.
Engineering Support: 20%
Support Marketing, Field Service, Flight Test and FAA Certification organizations as needed.
Act as liaison to manufacturing and production efforts as needed.
Support installation, functional and operational tests, and ground and flight tests.
Structural Substantiation: 10%
Performs preliminary stress analysis in support of initial layout and design concept.
Additional Responsibilities:

Other duties as assigned.
Qualified Experience / Skills / Training:

Education:

Required:

Bachelor's degree in Aeronautical/Mechanical/Civil Engineering from an accredited college/university or equivalent experience
Experience:

Required:

Minimum three (3) years of directly applicable engineering experience in an aviation/aerospace manufacturing or completions environment.
Preferred:

Minimum one (1) year of helicopter design and integration.
Licensure/Certifications:

Required:

None
Preferred:

None
Knowledge, Skills, Demonstrated Capabilities:

Required:

Knowledge of aviation/aerospace structural design requirements, aviation/aerospace industry standards and the Federal Aviation Regulations. Direct experience with rotorcraft is preferred.
Communication Skills (Spoken, Written, Influencing, Proficiency in Other Languages):

Must be able to communicate effectively in the English language (verbal and written).
Conversational French and/or German is a plus.
Technical Systems Proficiency:

Must be proficient with Microsoft Office Suite programs.
Minimum 4000hrs CATIA V5 (or similar 3D modeling software) , familiarity with AutoCAD and SAP programs
Travel Required:

5%
Minimal domestic and International travel is required.
Citizenship:

US Person under ITAR definition (U.S. Citizen, green card holder or person covered under our existing ITAR license)
 
Job Location: TX
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Tracey Hill
Address: 1600 AIRPORT FWY STE 400
City, State: BEDFORD, TX 76022-6871
Phone: 817/545-4009
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Strength (Stress) Analyst - Structural Analysis-Stress/DADT/Dynamics/FEA/FEM - no clearance GA

Description:
165671/1801-1
Senior Level Structural Strength (Stress) Analyst
Work Location: Marietta, GA
Status: Open

Qty: 1
Desired Start Date: 8/19/2019
End Date: 8/28/2020

Job Description:
This job is for a Senior Level Structural Strength (Stress) Analyst for the Air Mobility and Maritime Missions program supporting the C-130, LM-100J, C-5, and P-3 aircraft responsible for performing stress analysis on new and modified designs to validate that positive margins of safety exist for all failure modes under all operational and design criteria loading conditions. Job entails conducting strength analyses for primary and secondary structure and mechanisms, providing support to production during airframe manufacture, and substantiation of structural repairs for fielded aircraft. This individual must have a significant amount of experience conducting classical hand analysis of aircraft structure for various failure modes. Proficiency with FEA codes such as Nastran/Patran, StressCheck, and APEX is a plus. Individual must have strong interpersonal and communication skills. They must be capable of interpreting detail, assembly, and installation drawings. Basic qualification is a bachelor's degree from an accredited college in civil, mechanical, aerospace, or aeronautical engineering.

Work Location: Marietta, GA
Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
Pay Rate: $58.73 Hourly

Software Skills Finite Element Analysis (FEA) No 2 4 - 6 Years
Technical Skills Stress Analysis Yes 1 6 + Years
 
Job Number: JE-1801-1
Job Location: Marietta, GA
Rate: 58.73/hr max
Per Diem: pd split possible
Duration: 12 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structures & SystemsTest Engineer

Description:
Seeking an experienced structures & systems test engineer to support testing of mechanical systems and avionics components, assemblies, and integrated systems. The main tasks of this role are to define test requirements with internal customers, write test plans, design test stands and execute tests under the direction of the Engineering lead and/or Manager. Engineers in this position are expected to have knowledge of industry standard test practices and methods as well as engineering skills in design and analysis to required to develop custom tests.


Must have experience with:
• Mechanical systems, specifically pneumatic valves.
• RTCA – DO-160
• Vibration & thermal testing
• Functional testing
• Knowledge of test procedures
• Acceptance testing
• Data analysis
• Thermocouples
• CAD drawings – CATIA V5
• FEMAP and NASTRAN
• LabView
• SolidWorks
• Must be able to write reports


Your Mission:
• Design tests plans and equipment for validation of complex mechanical or structural components and systems.
• Write test plans and procedures to define and support execution of tests.
• Interface with internal customers on integrated program teams to establish and verify specific test requirements.
• Work with support teams and vendors to procure, manufacture and assemble test articles and test stand hardware and equipment.
• Analyze test data to verify test requirements and write test reports to document test results.
• Interface with external test laboratories to facilitate testing for design and analysis teams.
• Participate in the test engineering review, approval and release process.
• Participate in the continuous improvement of testing practices, including test processes, lab procedures and lab technology implementation.


What you bring:
• Bachelor’s degree from an accredited institution, with a concentration in a relevant Engineering discipline.
• 4-8 years’ or more experience in aerospace with an emphasis on testing or equivalent laboratory test engineering experience
• CAD modelling experience – Experience with Catia V5 preferred
• Experience with simulation and finite element analysis preferred – NASTRAN, Femap
• Experience with DO-160 environmental test standards for mechanical systems
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
• Focus on safety and reliability in testing.
• Results oriented approach to completing test activities successfully.
• Excellent verbal and written communication skills
• Excellent Organizational Skills and problem-solving skills
• Strong team player.
• Excellent computer skills, including Outlook, Word, Excel and PowerPoint


ITAR Requirements
To conform to U.S. Government space technology export regulations, applicant must be a U.S. citizen, lawful permanent resident of the U.S.

The Structures Company is an AA/EOE.
 
Job Number: 290
Job Location: CA
Rate: $70-$75/Hr. **DOE**
Per Diem: Yes
Overtime: Possible
Duration: 10+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
System Engineer PCIe communication Bus

Description:
*This is a full time, 6-12 month contract position located in Nashua, NH*



We are hiring for a contract communications Bus system engineer for a PCIe Express project. Candidate will create requirements for systems PCIe communication, between interface test module and electronic modules such as the EWC and EWP. Project is for developing a new product for and aerospace application that will involve electrical engineering and require the applicant to develop the set of requirements for an instrumentation Bus card



Daily duties may include performing research, analyze criteria, conducting trade studies to determine the architectural approach, and help support the design and integration of the instrumentation module.



Required:
*15 years’ experience developing/integrating test instrumentation hardware for PCIe bus communications.
*Strong hands on PCIe Bus design, integration and troubleshooting/debugging experience.

*Active Secret Clearance (within the last 2 years)
*Engineering degree (EE preferred)



Pluses:
*Experience in test instrument programming.
*Electronic weapon systems electronics integration
*Experience writing or troubleshooting PCIe drivers.
*Knowledge of HTT instrumentation cards.
 
Job Number: 554
Job Location: Nashua, NH
Rate: $95.00
Per Diem: yes split
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
System Safety Engineer; MIL STD 882

Description:
*This is a full time, 1 year contract position, located in York, PA*



We are hiring for a Senior Systems Safety Engineer to work on a DoD military vehicle program, the M88FOV. The responsibilities will be to conduct preliminary and design changes/modifications for system hazard, subsystem, operating and functional Hazard and Fault Tree Analysis per MIL-STD-882, particularly 882E



Daily work may include developing system safety risk assessments, hazard tracking database flow downs to suppliers, audits, recommend safety features and controls for system design, software, training and procedures to mitigate or eliminate hazards including developing safety documents to support customer and test/operational range requirements, work with accident investigations involving damage to products or related facilities and assists in identification of causes and corrective actions, evaluates the interrelationship of system safety requirements and other aspects of concept design and development requirements to ensure the most cost effective program.



Additional work will include conducting safety check lists and inspections, supporting design & test readiness reviews and safety working group meetings, preparing data packages and briefing material for Customer System Safety Review Boards and identification and maintenance of Critical Items List.



Required:
*5 years’ experience in System / Mission Safety in an aerospace or defense subcontracting capacity; experience with DoD and MIL-STD 882, especially 882E.
*Good knowledge of writing up hazards (cause and effect), and developing risk avoidance strategies
*US Citizens only please.
*Engineering Degree



Pluses:
*Working with/evaluating install and parts drawings, including electrical circuit diagrams
*Experience in preparing technical system safety documentation and presenting safety case to the SSSTRP or equivalent safety boards
*Experience conducting Mission / System Safety and impact analysis including design, audits, testing and verification; these may include Preliminary, Threat, Flight Test Safety Assessment and Fault Tree Hazard Analysis (FTA), System Hazard Analysis (SHA), Subsystem Hazard Analysis (SSHA), Health Hazard Analysis (HHA), Functional Hazard Analysis (FHA), or Fault Tree Analysis (FTA).
*Experience using MIL-STD-1472 and MIL-STD-1474.
*Experience in AMCOM 385-17 or AOP 52 Safety Analysis and implementation programs
*Experience creating sustaining system safety program plans.
 
Job Number: 143
Job Location: York, PA
Rate: 50.40
Per Diem: yes split
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems.
Responsible for performing analysis at all levels of total system product to include concept, design, fabrication, test, installation, operation, maintenance and disposal.
Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints.
Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications.
- Bachelor’s degree in an Engineering field
- Experience working in Aerospace programs
- DoD or USG Systems Engineering experience



Please send resumes to Becky Norman at bnorman@butler.com. Phone number is 469-785-4744.

____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 58708
Job Location: Fort Worth, TX
Rate: DOE
Per Diem: possible
Overtime: possible
Duration: 15 months
Start Date: Feb-Mar 2020
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Becky Norman
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer - Clearance TX

Description:
166144 Job Title: Systems Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2002-1
Max Pay Rate: $65.92/hr
Start Date: 9/13/2019
End Date: 12/12/2020
Position Type: Contract

Job Summary:
This position is part of the Systems Engineering organization. Candidate is needed to fulfill a role in obsolescence management of aircraft components, also known as Diminishing Manufacturing Sources & Material Shortages.

Job Description:
Specifically, tasks will support the F-35 program and involve activities needed to mitigate the effects of obsolescence including last-time buys, lifetime buys, and Bill of Material (BOM) monitoring. Additional duties will include inventory management and coordination, review and dispositioning of Supplier Data Requirements Lists (SDRLs), generating and briefing Business Case Analyses (BCAs) for parts buys, and developing Contract Data Requirements Lists (CDRLs) to the Customer. Candidate will be expected to interface and integrate solutions across F-35 Engineering leadership, system/subsystem engineering teams, Supply Chain, Business Management, Program Management, and all associate parties involved in DMSMS for the F-35 program.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS
• Experience in DMSMS in the Aerospace Industry
• Experience in Product Data Management using Teamcenter, Siemens PLM Software portfolio.
• Experience in Electrical Engineering or Components Engineering with emphasis upon Mission Systems Integration.
• Experience working with Suppliers and/or Supply Chain engagement.
• Experience using Microsoft Office tools emphasizing Excel, PowerPoint, and Word.
• Experience with written, verbal, and presentation communications skills, including briefing to members of upper management.
• Experience in Systems Engineering disciplines with understanding of the total lifecycle (architecture, requirements, design, analysis, integration, verification, production and sustainment) including the following key competencies: Supplier Interface, Proposal Analysis, Risk and Opportunity Assessment.

Areas of Expertise Materials No 1
Areas of Expertise Supply Chain No 1
Technical Skills Data Management No 1

Qty 1 position needed
 
Job Number: JE-2001-1S5
Job Location: Fort Worth, TX
Rate: 65.92/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer DOORS

Description:
*This is a full time, 1 year contract to hire position located in York, PA*

*Per diem split is available for out of the area applicants*

*Pay rates may have some flexibility*



We are seeking a system engineer / requirements engineer who will be conducting requirements analysis, requirements development, Concept of Operations (CONOPS), cost, and risk assessments, trade studies, and document system design descriptions.



Daily duties will consist of developing component level performance specifications and traceability using DOORS. Scope of work will also encompass developing requirements compliance, interface control diagrams (ICDs), developing trade studies, coordinating SE activities with IPTs, providing engineering support program reviews.



Required:
*4-6 years’ experience developing engineering requirements/specifications (subsystems and components); requirement derivation, allocation and management using DOORS.

*Strong system design (not data entry, but true design) of DoD, Aerospace or Military projects using DOORS.

*Good SOW understanding
*Familiar with balance system design considering system usage CONOPS, performance, constraints, and logistics.
*Understanding risks and management of deadlines and milestone reviews.

*Out of area candidates are eligible for Perdiem split; Overtime is available.
*4 year degree



Pluses:

*Knowledge of Interface Control Diagrams (ICD)

*Military vehicle applications design experience

*SysML / MagicDraw(System Modeling Language) experience

*Knowledge of CAN (Controller Area Network) Bus strategies and implementation

*Able to plan, conduct and document complex trade studies.
 
Job Number: 858
Job Location: York, PA
Rate: DOE
Per Diem: yes split
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Safety Engineer ( Northridge, CA ) S9436479

Description:
Systems Safety Engineer ( Northridge, CA ) S9436479
6 Month Contract to Hire, high potential to convert

Pay rate: $70-100 /hr , flexible for the right candidate

Clearance: Active DoD Secret level clearance required

Interviewing ASAP

Qualifications:
- Bachelor of Science degree in Electrical Engineering or similar Engineering degree.
• Minimum 7 years of related experience.
• High level understanding of tactical missile subsystems.
• Proficient with MS Office suite of products.
• Strong interpersonal skills and an ability to build effective working relationships are a must.
• Excellent attention to detail.
• Excellent oral and written communication skills and technical writing experience.
• Ability to communicate findings to varied audiences to gain support or resolve concerns.
• Self-starter capable of performing and prioritizing assigned tasks with very little direction.
• Familiarity with requirements development and risk management. //

Key responsibilities include:
• Performing fundamental aerospace safety tasking, including generation of fault trees, functional hazard analysis, Failure Modes and Effects Analysis, Failure Mode, Effects and Criticality Analysis, software system safety analysis, sneak circuit analysis, bent pin analysis, and system/subsystem hazard analysis
• Interpreting system requirements, customer specifications, and military standards to develop appropriate safety requirements for hazard mitigation or elimination
• Generating and updating required System Safety documents such as SSPP, RHA, SCA, FTA, BPA, SSHA, SARs
• Applying environmental, military, federal, national, and industry regulatory safety standards and codes such as NIOSH, OSHA, NFPA, DOE, UBC, CFR, ASTM, ANSI, RCC, AFOSH, PESHE, MIL-STD-882, and AFSPCMAN 91-710
 
Job Number: S9436479
Job Location: Northridge, CA
Rate: Open
Per Diem: no
Overtime: yes
Duration: 6 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Talent Acquisition Business Partner 3 - no clearance FL

Description:
167224 Job Title: Talent Acquisition Business Partner 3

Work Site Address : 2000 W Nasa Blvd, Melbourne, FL 32901
Job Number: 1834
Max Pay Rate: 37.00-38.00
Start Date: 1/20/2020
End Date: 1/20/2021
Position Type: Contract

Job Description:
Responsibilities include providing full-life cycle technical recruiting to Company’s Aerospace Systems Sector in Melbourne, FL. Knowledge in all full-life cycle recruiting including, but not limited to sourcing, screening, qualifying, interviewing and candidate relationship management while guiding hiring managers and candidates through the selection process. A successful candidate must be able manage competing demands; accept constructive feedback, while being extremely adaptable and flexible to changing business requirements. This position requires a demonstrated ability to recruit for a broad/deep range of technical and professional positions and handle sensitive and confidential information appropriately. Occasional travel may be required.

Roles and Responsibilities:
Provides full-life cycle recruiting
Knowledge in all full-life cycle recruiting including, but not limited to sourcing, screening, qualifying, interviewing, comp analysis and formulating offers
Experience with relationship management while guiding hiring managers and candidates through the selection process
Position requires a demonstrated ability to recruit for a broad/deep range of technical and professional positions and handle sensitive and confidential information appropriately
The successful candidate must be able to maintain excellent customer service with hiring managers, candidates and maintain a partnership with HR Business Leaders
Ability to function independently in a high-volume fast paced environment
Demonstrated ability to command the attention and respect of leadership, ability to create and manage strategic alliances and drive the process
A successful candidate must demonstrate solid judgment, the ability to quickly learn systems, processes and procedures
Must be able to quickly assimilate technical information and operate with financial responsibility
Occasional travel may be required

Basic Qualifications:
BA/BS degree plus 6 years full-life cycle recruiting or Masters degree plus 4 years of experience. Strong business acumen; ability to provide consultative approach to the business.
Should have a strong understanding of OFCCP process compliance

Preferred Qualifications:
A mix of both agency and corporate recruiting is a big plus

Talent Acquisition Business Partner 3 (Job Number: 19037083)
Number of Openings: 1
Location(s): United States-Florida-Melbourne

Shift: 1st Shift
1 year contract
Pay Rate: $37 to $38/hr
Work Schedule: 9/80
Duration of Assignment: Up to 1 year
 
Job Number: JK-1834
Job Location: Melbourne, FL
Rate: 38/hr max
Duration: 1 year
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Designer-Engines Tooling

Description:
A Technical Designer-Engines Tooling job in Kent, WA is currently available through Belcan. The Technical Designer-Engines Tooling job will Design and maintain component and assembly product definition by preparing design layouts and drawings, modifying existing designs and resolving design discrepancies This position will directly impact the history of space exploration and will require your dedicated commitment and detailed attention towards safe and repeatable spaceflight.

Technical Designer-Engines Tooling duties:

* Apply Design for Manufacturing and Design for Assembly
* Apply relevant company, industry (design, drafting, parts) techniques to plan, lay-out, and
maintain data depicting engineering designs (detail, assembly and installation drawings)
* Apply relevant company, industry (design, drafting, parts) techniques to plan, lay-out, and
maintain data depicting engineering designs (detail, assembly and installation drawings)
* Implement engineering and manufacturing best practices to achieve a balanced approach to
cost, schedule and performance requirements
* Self-prioritize and self-schedule work activity in support of the team
* Assist in the development and deployment of reasonable standards for drafting.
* Support drafting standards checking and training for the team.

EDUCATION AND EXPERIENCE REQUIRED
* 5+ years of experience designing/drafting structural parts, precision components, and/or
subsystems
* Proficiency in Creo Pro/E and Pro/E Piping, Sheet Metal, and Mechanism
* Experience with mechanical and weldment design and component integration Experience
creating and maintaining family tables; ability to work on multiple projects in parallel
* Strong work ethic with a high attention to detail and level of organization
* Extensive knowledge of precision machined component design and manufacturing
* Experience managing large CAD assemblies and associated drawings
* Extensive experience and knowledge of ASME Y14.5 Geometric Dimensioning and Tolerance

Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.

If you are interested in this Technical Designer-Engines Tooling job in Kent, WA please apply via the 'apply now' link provided.

Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

 
Job Number: 299013
Job Location: Kent, WA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Firm Name: BELCAN TECHSERVICES
Attention: DerrickHart
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Editor and Writer 3 - no clearance CA

Description:
Technical Editor and Writer 3 (Job Number: 19035727)

Number of Openings: 1

Location(s): United States-California-Palmdale


Shift: 1st Shift

Target Start Date: Dec 16, 2019

Target End Date: Dec 11, 2020

Pay Rate: $38 - $40/hr

Work Schedule: 9/80A

Duration: 1 year

Location: Palmdale


Writes, rewrites and/or edits technical documents such as technical procedure manuals, user manuals, programming manuals, service manuals, operational specifications, and related technical publications to communicate clearly and effectively technical specifications and instructions to a wide range of audiences. Acquires subject knowledge by interviewing product developers, observing performance of production methods, referring to technical specifications, blueprints, engineering illustrations, and trade journals. Oversees preparation of illustrative materials, selecting drawings, sketches, diagrams and charts. Conducts quality review of materials.


Basic Qualifications:

6 Years with Bachelors; 4 Years with Masters


Required and Asset Skills & Experience

· Aerospace background with Engineering knowledge (mechanical, aerospace, electrical etc.) and/or hands-on experience in the aerospace maintenance field
· Experience with S1000D, ATA2200 and/or MIL-SPEC specifications is an asset
 
Job Number: JK-1824
Job Location: Palmdale, CA
Rate: 38-40/hr max
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Engineer-Avionics Development

Description:
A Test Engineer-Avionics Development job in Kent, WA is currently available through Belcan. In this role, you will develop specialized test systems in support of integrated Avionics testing at the box level for our suborbital launch vehicle programs for various spaceflight systems. You will also coordinate test system requirements with Avionics subsystem owners, integration and test engineers, and operations personnel. Major test system elements include environmental test racks, ground power and battery charging racks, wired and wireless communication ground stations, and ground network switchgear. To be considered for this role, you will have a B.S. degree in Electrical Engineering, Computer Engineering, or related field, plus a minimum of five years of related experience. Due to the nature of work performed at this facility, you must be a U.S. Citizen or Permanent Resident (Green Card holder).

Test Engineer-Avionics Development duties:

* Design, development, verification, and integration of specialized test hardware and software
* Work with internal stakeholders to define requirements, dependencies, and schedule needs associating with delivering test systems to programs
* Integrate test system hardware & software development schedules with program and vehicle schedules
* Support operational checkout of systems under test and provide training to test and operations personnel
* Work to continuously improve the avionics test team processes and standards

Qualifications:

* 5+ years of specialized test and electrical ground support equipment hardware and software design and development
* Excellent written, verbal, and interpersonal communication skills
* Passion for hands-on problem solving and avionics integration and test
* Ability to work independently and as part of a team on rapid development programs
* Ability to travel to and work at remote sites for extended periods supporting test integration, commissioning, and training

If you are interested in this Test Engineer-Avionics Development job in Kent, WA, please apply via the link provided.

Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.
 
Job Number: 297724
Job Location: Kent, WA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Firm Name: BELCAN TECHSERVICES
Attention: DerrickHart
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Designers - Catia V5 or UGNX

Description:
UGNX or Catia V5 - Aircraft/Aerospace background
Leads the development of highly complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements. Leads design reviews, design requirement collection, drawing creation and revision

Email resume to: mmccarthy@pdstech.com
 
Job Number: BO-TOL-MO
Job Location: St. Louis, MO
Rate: $59.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 6 Months+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

Back to Advanced Job Search