Job Search Results

397 listings were found that matched your search words: Keywords: Electronic ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2024/03/28 Thursday 05:58AM Pacific Time by ContractJobHunter. )

Listings 1 - 397

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer with active secret CA

Description:
Requirement# AERO-REQ-0775
Work Location Palmdale, CA
Work Week 9/80
Needed Date 03/28/2017
End Date 12/28/2017
Number of Resources 1
Security Clearance Secret (Prime Contract:P - 16, Can start w/o clearance:No, Interim Clearance Sufficient:No)

Title Aeronautical Engineer

Description
Contribute to aircraft design, configuration development, feasibility and risk analyses, and technology maturation plans from the Flight Control and Vehicle Management Systems (FC&VMS) perspective. Define, Develop, analyze and coordinate FC&VMS requirements with other flight sciences disciplines as well as ground and flight test, reliability & maintainability, system safety, and other personnel. Close coordination with the propulsion community is required for flight control and for ground testing. Develop models and simulations as needed for design and analysis. Perform trade studies and define preliminary requirements for VMS architecture components. Design mechanical and electronic interfaces to support integration and test. Define high level software requirements. Good oral and written communication skills are required as is the ability to flex and adapt in a fast-paced team environment. Complex organization and documentation skills are required. Candidate must possess an active SECRET clearance with 5 year re-investigation. Candidate must have significant Flight Controls and Flight Simulation experience.

Skill/Experience/Education
Mandatory:

Active SECRET Clearance with Background Investigation in last 5 years. Significant work experience with Flight Controls and Flight Simulation
Desired:

Bachelors Degree or above in an Engineering or Related field.


Interview Required Yes

Shift 1st Shift

OT Allowed Yes (OT Limitation: No)
Travel No
Non-Exempt

Rates
0-4 YrsPay Rate: 65.00 USD
5-8 YrsPay Rate: 70.00 USD
9+ YrsPay Rate: 75.00 USD
 
Job Number: JE-0775
Job Location: Palmdale, CA
Rate: 65-75/hr DOE
Per Diem: no
Duration: 9 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Analog Design Verification Engineer

Description:
Job Description:
Our Client is seeking an individual to perform analog verification and research of advanced analog mixed signal integrated circuit blocks. The applicant must be familiar with analog, RF and mixed signal design/fabrication and the associated EDA design tools. Other duties may include designing test articles to evaluate security principles. The selected applicant will represent our Client and DoD customers in outside discussions and technical forums. This position will require some travel. The selected candidate will meet eligibility requirements for a DoD a security clearance.

Required Skills & Experience
An MS Degree in Electrical/Electronic Engineering or Computer Science with five (5) years of experience is required. A strong understanding of design principles, parasitic interactions, and post-fab test is required.

Desired Skills and Experience
Additional experience in digital circuit design is desired.
Familiarity with advanced Cadence Design Systems IC design flow, Synopsys, and Mentor Graphics tools is desired.
Familiarity with at least one (1) commercial scripting programming language such as PERL or Python is desired.

Special Requirements/ Certifications:
Candidates must be a U.S. Citizen
Opportunity for contract-to-hire based on worker performance, worker attendance and dependability and client business needs 
Must be eligible for security clearance. The National Agency Check with Inquiries (NACI) is a background investigation primarily for federal employees who will not have access to classified information. DoD clearance is not required.
 
Job Number: 18-12268
Job Location: Dayton, OH
Rate: OPEN
Per Diem: Split
Overtime: POSSIBLE
Duration: 3 Month Contract-TO-Hire
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Cody Grimes
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aviation CASS Analysts - Jamaica, NY

Description:
STS AeroStaff Services is hiring Aviation CASS Analysts in Jamaica, New York.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

The Analyst is responsible for conducting the administrative aspects of all QA CASS Programs. In addition the Analyst will be responsible to monitor, trend and update the various QA databases with audit and investigation data. The candidate would have the ability to track and crystallize this information within QA’s periodic CASS reports.

Job Duties:

• Administers the business processes associated with all CASS programs, which entails data collection, analysis, and reporting for the programs
• Processes vendor approval request (MX-55s) as received from QA Internal customers
• Analyzes and generates CASS reports using Surveillance data
• Make recommendations for CASS activity, escalations, de-escalations based on audit activity
• Maintain Maintenance Provider Manual/Approved Vendor List (MPM/AVL)
• Tracks the Coordinating Agency for Supplier Evaluation database for audit completion and closure
• Maintains listing of Foreign Repair Station expiry and purges expired certificates
• Generates, distributes and tracks Vendor Audit Questionnaires
• Maintains the QA electronic databases and hard audit files and finding reports
• Collects information to support CASS investigation and analysis
• Information collection efforts include, but not limited to database queries/reports verifies correct references and acquiring supplementary data from internal and external databases
• Develop and generate other periodic CASS reports to support CASS management
• Additional duties as assigned

Basic Qualifications:

• Bachelor’s Degree or equivalent work experience
• One (1) to three (3) years analytical experience
• Experience with database management and Microsoft Office applications
• Must pass a ten (10) year background check and pre-employment drug test
• Must be legally eligible to work in the country in which the position is located

Preferred Qualifications:

• Strong team building interpersonal skills
• Excellent verbal and written communication skills
• Strong organizational and time management skills
• Working knowledge of commercial aircraft systems preferred
• Ability to work in a fast paced deadline driven environment
• Working knowledge of regulations governing commercial aviation
• Working knowledge of website development preferred

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 42028
Job Location: Jamaica, NY
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Software Integration Engineer

Description:
Avionics Software Integration Engineer

Location: Pomona, CA
Pay Rate: $79/hr
Duration: 8 Month W2 Contract
Shift: First
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**
**NO RELOCATION COMPENSATION**

Description/Comment:
-Designs, develops, documents, tests and debugs control and diagnostic systems that contain logical and mathematical solutions.
-Conducts multidisciplinary research and collaborates with equipment designers in the planning, design, development, and utilization of electronic data processing systems for product and commercial software.
-Determines end user needs by analyzing system capabilities to resolve problems on program intent, output requirements and input data acquisition.
-Designs and implements build procedures that are used to support hardware and software product development and use.

Requirements:
-BS in Software Engineering or Software-related discipline
-10 years minimum experience as a software engineer in and Aerospace company
 
Job Number: 8935
Job Location: Pomona, CA
Rate: 79
Per Diem: No
Overtime: Possible
Duration: 8 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Systems Engineer

Description:
Duties and Responsibilities:
Define, plan, and develop complex systems level requirements to support avionic systems
Perform systems level integration activities for aircraft avionic systems including: Control and Display Systems; Navigations Systems; Communication Systems; Surveillance Systems; and Cabin Management Systems
Interface with suppliers to ensure technical requirements are met to support aircraft development need dates
Provide technical assistance to production and customer service departments for support of system technical inquires and issue resolution
Perform system evaluation and analysis to verify the system design compliance with functional requirements
Coordinate with cross-functional team members to complete assignments/projects as defined and on schedule
Develop targeted system level enhancements to address customer feedback and product improvement initiatives
Conduct system lab testing and aircraft functional testing
Prepare presentations on avionics system design/development status
Support system analyses for avionic systems

Qualifications

Education, Work Experience, Certification and/or Licensure:
Bachelors’ degree in Engineering from a four year college or university; preferably in Electrical/Electronics Engineering or Aerospace Engineering
Minimum of 6 years to a maximum of 20 years’ experience working with integrated aircraft avionic systems in the areas of design engineering, system analysis, and system test

Knowledge, Skills and Abilities:
Working knowledge of design requirements of 14CFRPart 23
Proficiency in writing technical documentation and reports involving test data and analysis
Familiarity with avionics/electrical test laboratories and lab equipment
Working knowledge of System qualification requirements including DO-160E/F for environmental, DO-178B for software, and DO-254 for complex electronic hardware
Proficiency in Microsoft Office suite (Word, Excel, Project, PowerPoint is required)
Proficiency in requirements management tools such as DOORS
Proficiency in PLM Tools such as TeamCenter and SAP
Ability to handle complex work assignments
Ability to work independently and within a multi-functional team environment

The Structures Company is an AA/EOE.
 
Job Number: 189
Job Location: NC
Rate: $60.00
Per Diem: Yes
Overtime: Yes
Duration: 9+ Month
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Technician

Description:
Avionics Technician provides technical expertise in testing aircraft systems, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. May fill in for the Senior Avionics/Electrical Technician thus ensuring that the company goals of safety and quality are enforced at all times while adhering to daily work plans to maintain schedule requirements.
Education:
High School graduate/GED. A & P license, FCC license or NCATT certification preferred. Four (4) years’ experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and two (2) years related experience.
 
Job Number: 116864
Job Location: Savannah, GA
Per Diem: Yes
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Rashmi
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Machinist

Description:
CNC Machinist applies advanced skills in administration and use of procedures, techniques, tools, materials and/or equipment, as appropriate to area of specialization. 2. Independently perform repairs of mechanical and electrical assemblies and subassemblies through removals, repair or replacement of defective parts and/or fabrication of replacement parts, and installations in accordance with blueprints, component maintenance manuals, vendor documents, verbal instructions, engineering dispositions, and other authorized maintenance data. All activities to be in accordance with Repair Station requirements ensuring all parts and assemblies meet conformance. 3. Set up and operate necessary test equipment in accordance with required documentation to perform functional and operational tests of mechanical and electrical aircraft components for return to service. 4. Inspect all detail parts using blueprints, component and/or overhaul manuals and other required maintenance data to ensure conformity requirements are met. 5. Remove skins and related components on flight controls and secondary structure components, locate and install/reinstall parts. 6. Demonstrate expertise and efficiency in repair techniques using acceptable practices including troubleshooting, soldering and application of protective coatings. 7. Demonstrate expertise in use, maintenance, and calibration requirements of precision measuring and inspection tools such as, but not limited to, micrometers, calipers, bore gauges, multimeters, watt meters, spectrum analyzers, and borescopes. 8. Demonstrate expertise in the flow of materials and work order processes within the repair station. 9. Maintain and utilize all required paperwork in accordance with FAA Repair Station requirements. 10. Maintain a clean and orderly work area. 11. Comply with all company and legislative environmental health and safety regulations. Must be proficient in the setup and operation of 3-5 axis CNC Mills. Must be able to setup and operate conventional mills and lathes and use related precision measuring tools to inspect machined detail components to blueprints / 3D models.


CNC Machinist Lay-out, remove, fabricate and/or install major and minor repairs to flight controls and other secondary structure components using honeycomb core sandwich construction techniques, composite repair techniques, test bench procedures, hydraulic press procedures, and servicing carts. 2. Fabricate and repair sheet metal and associated mechanical parts, components and/or equipment by rolling, shrinking, stretching, braking, riveting or other mechanical means. 3. Remove & install APUs and perform all required APU maintenance for all aircraft models 4. Perform repairs to electronic assemblies and subassemblies by removing and replacing circuit components, either through hole or surface mount, using acceptable soldering and circuit repair techniques. 5. Fabricate and repair wiring and electrical assemblies and harnesses utilizing acceptable repair and fabrication processes including splicing, soldering, and pinning of wires. 6. Assist with training and instructing of other Acft Compo Repair I and II Techs. 7. Perform other duties as assigned.
HS diploma or GED. A&P license, FCC license, or NCATT cert preferred. Able to read/interpret blueprints, engrg docs and use/read precision measuring tools. Proficient in the operation of all tools & equip in the dept. Basic understanding of shop math. 4 yrs. experience in one of the following or other related expr: Sheetmetal, hydraulic overhaul, avionics/elect compo repair. Accredited schooling in electronics and elect sys may offset some experience reqmts. APU removal, install, service.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CREO Product Definition & Verification (Checking) Designer III/IV

Description:
Creo Product Definition & Verification Checker III/IV

Location: Canoga Park, CA
Rate: $55-$60/hr DOE
Duration: 6 Month W2 Contract
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**
**Candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
** 10 years as a drawing and model checker for Aerospace mechanical hardware**
** Strong proficiency using GD&T per ASME Y14.5 **
** 5-10 years Creo and Windchill PLM System **

Under limited general direction and following established procedures in accordance with contractual requirements and Company policy and procedures, this position performs engineering design assignments for preparation of engineering design documents and maintaining the design disclosure. Typical responsibilities include: Prepare product definition (CAD models and drawings). Perform Verification of Product Definition (Checking) includes models, drawings and PLM attributes and relationships.

40% - Create, check and maintain design product definition (Models & Drawings) for engineering designs. This includes, but is not limited to, preparation of design layouts and/or preliminary conceptual design layouts, as well as outsourced design project leadership.

30% - Performs design calculations to validate any phase of design requirements.

20% - Estimation of resources and schedule required to complete a design activity and training to staff.

10% - Provide technical guidance to less senior CAD designers and to design support personnel.

Skills:
-10 years of experience with CAD systems (Creo 2.0 preferred) along with experience using CAD database management and PLM tools (Windchill prefered).
-Knowledge of Mechanical and Electrical harnessing and packaging of Aerospace hardware required.
-Expert knowledge of geometric dimensioning and tolerancing (ASME Y14.5).
-ASME Certification in GD&T is a plus.
-Ability to read and interpret product definition and related specifications.
-Electronic markup tools and the ability to work paperless is required.

Education:
-Requires a Bachelor’s degree in an appropriate discipline and at least 5 years of related experience or an equivalent combination of education.
 
Job Number: 8889
Job Location: Canoga Park, CA
Rate: 55-60
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract Analyst (Reinsurance)

Description:
We are seeking for an Full Time 'Contract Analyst' Specialist for this well known inveting company here in Seattle, WA. You will be the primary colleague accountable to Broking for contractual documentation for client accounts assigned, expected to develop and apply increasingly expanding knowledge of basic reinsurance concepts and solid language writing skills to each contract/program assigned, under regular supervision.

RESPONSIBILITIES:
Responsible for delivering consistently for managing own workload and deadlines with Brokers and others to ensure expectations are met on assigned accounts. Performs all contract drafting and document management responsibilities for assigned accounts, all within published guidelines and with supervisory guidance as needed.
Viewed as a partner to the placement process and expected to be available to support those activities when needed, as reasonable.
Contract Support
Under regular supervision, perform all or some of the following core job functions:
Management of assigned client base for all aspects of reinsurance contracts.
Interpret and assess contracts and perform quality assurance review to ensure contract wording reflects intent of reinsurance negotiations.
Input contract status data on the electronic document tracking system.
Utilize CSS Dashboard and/other legacy tracking tools to manage contract performance.
Promote, build and maintain relationships with Brokers, Clients and Markets.
Continuous Learning
Participate in team meetings and activities to share opinions, ideas, knowledge and solutions, appropriate to skill level; maintain strong working relationships and participate in initiatives and/or contribute where required to deliver outcomes.
Seek opportunities to increase own understanding and improve the services provided.
Gain broad understanding of the environment in which the client operates and the marketplace
Compliance and Regulatory Review
Understand all published procedures and compliance policies. When new procedures are provided,understand and adopt new procedures as rolled out, take required training and speak up with any question or concerns uncovered in your role
Demonstrate understanding of and appreciation for the way in which own actions/inactions protect or subject GC to potential errors & omissions.
Other
Support team by maintaining Colleagues’ workloads in their absence.
Support Brokers by assisting with contract-related inquiries from Clients and/or Markets as requested and with assistance and guidance as necessary.
Qualifications
Bachelor’s Degree and related or transferable experience preferred.
Experience:
Exposure to a corporate environment preferred for entry into this role; 3 years related experience in insurance/reinsurance industry desired.
Knowledge of contract law, contract provisions, reinsurance concepts and principles, basic regulatory controls and general business trends.
Proficiency in Microsoft Office Applications (Word, Excel, PowerPoint) required.
Demonstrated ability to work as part of a high performance team.
Attention to detail in completing assigned tasks.
Positive attitude, willingness to offer and execute ideas and solutions to enhance processes within a changing environment.
Successful management of workload; able to manage expectations of all Clients and Stakeholders, under regular supervision.
Able to challenge appropriately, supporting business cases with facts and information.
Understanding of project management methodology, stakeholder management, and risk mitigation.
Able to engage, influence and negotiate with Clients, Markets and Colleagues in a professional manner, with guidance as needed.
Strong communication and negotiation skills, both written and verbal, delivering clear and concise messages and at all times promoting and enhancing brand.
Strong ability to quickly assess and offer effective solutions to problems efficiently.
Ability to make sound judgments, with guidance as required, while knowing when to bring situations to the attention of Management.
Consistently deliver superior Client service.
 
Job Location: Seattle, WA
Overtime: Yes
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Creo Product Definition & Verification Checker III/IV

Description:
Duties: ** Candidates must be U.S. Citizens **** Permanent residents are NOT eligible for this role **** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable ** ** 10 years as a drawing and model checker for Aerospace mechanical hardware** ** Strong proficiency using GD&T per ASME Y14.5 ** ** 5-10 years Creo and Windchill PLM System ** Under limited general direction and following established procedures in accordance with contractual requirements and company policy and procedures, this position performs engineering design assignments for preparation of engineering design documents and maintaining the design disclosure. Typical responsibilities include: Prepare product definition (CAD models and drawings). Perform Verification of Product Definition (Checking) includes models, drawings and PLM attributes and relationships. 40% - Create, check and maintain design product definition (Models & Drawings) for engineering designs. This includes, but is not limited to, preparation of design layouts and/or preliminary conceptual design layouts, as well as outsourced design project leadership. 30% - Performs design calculations to validate any phase of design requirements. 20% - Estimation of resources and schedule required to complete a design activity and training to staff. 10% - Provide technical guidance to less senior CAD designers and to design support personnel. Skills: -10 years of experience with CAD systems (Creo 2.0 preferred) along with experience using CAD database management and PLM tools (Windchill prefered). -Knowledge of Mechanical and Electrical harnessing and packaging of Aerospace hardware required. -Expert knowledge of geometric dimensioning and tolerancing (ASME Y14.5). -ASME Certification in GD&T is a plus. -Ability to read and interpret product definition and related specifications. -Electronic markup tools and the ability to work paperless is required. Education: -Requires a Bachelors degree in an appropriate discipline and at least 5 years of related experience or an equivalent combination of education.
 
Job Number: 385801
Job Location: Canoga Park, CA
Input Date: 11/14/2020
Firm Name: CDI CORPORATION
Attention: Jonathan Oleson
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Creo Product Definition & Verification Checker III/IV URGENT CA

Description:
161675/8206731 (7812987)
Job Title: Creo Product Definition & Verification Checker III/IV

Number of Positions: 1

Remaining Positions: 1

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **





** 10 years as a drawing and model checker for Aerospace mechanical hardware**



** Strong proficiency using GD&T per ASME Y14.5 **



** 5-10 years Creo and Windchill PLM System **





Under limited general direction and following established procedures in accordance with contractual requirements and Aerojet Rocketdyne policy and procedures, this position performs engineering design assignments for preparation of engineering design documents and maintaining the design disclosure. Typical responsibilities include: Prepare product definition (CAD models and drawings). Perform Verification of Product Definition (Checking) includes models, drawings and PLM attributes and relationships.



40% - Create, check and maintain design product definition (Models & Drawings) for engineering designs. This includes, but is not limited to, preparation of design layouts and/or preliminary conceptual design layouts, as well as outsourced design project leadership.



30% - Performs design calculations to validate any phase of design requirements.



20% - Estimation of resources and schedule required to complete a design activity and training to staff.



10% - Provide technical guidance to less senior CAD designers and to design support personnel.



Skills:
-10 years of experience with CAD systems (Creo 2.0 preferred) along with experience using CAD database management and PLM tools (Windchill prefered).

-Knowledge of Mechanical and Electrical harnessing and packaging of Aerospace hardware required.

-Expert knowledge of geometric dimensioning and tolerancing (ASME Y14.5).

-ASME Certification in GD&T is a plus.

-Ability to read and interpret product definition and related specifications.

-Electronic markup tools and the ability to work paperless is required.

Education:
-Requires a Bachelor’s degree in an appropriate discipline and at least 5 years of related experience or an equivalent combination of education.


Skills:
Required
GEOMETRIC DIMENSIONINGCREOGEOMETRIC TOLERANCINGWINDCHILLAEROSPACE
Additional
PACKAGING ENGINEERINGHARNESS CABLING

State/Province: California
City/Town: Canoga Park

Start Date: 04/30/2018 Hours Per Week: 40.00
Est. End Date: 10/28/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-8206731
Job Location: Canoga Park, CA
Rate: 60/hr max
Per Diem: no
Duration: 6 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Database Administrator - Level 3

Description:
Database Administrator - Level 3

Location: Lexington, KY
Pay Rate: $45/hr - $50/hr
Duration: 9 Month W2 Contract
Shift: First, 5/40, exempt OT
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**
**MUST have an ACTIVE DoD SECRET CLEARANCE**

Description
-Implements and maintains smooth operation and physical design of SQL Server databases.
-Reviews database design and integration of systems, provides backup recovery and makes recommendations regarding enhancements and/or improvements. Maintains security and integrity controls.
-Formulates policies, procedures, and standards relating to database management, and monitors transaction activity and utilization.

Responsibilities include:
database loading; development and management of operational procedures; environment management; database health (e.g. monitoring, proactive and reactive responses); resource planning; database upgrade planning; backup and recovery strategy planning and implementation; environment transition planning (development, test, stage, production).

Miscellaneous:
-May start the job with an interim clearance.
-Not a remote position - must be onsite in Lexington KY.
-No portable electronic devices (e.g. cell phones) allowed in the facility.

Skill/Experience/Education (Mandatory):
- SQL Server Database Administration – (4-5 years' experience required)
-Security+ Certification required
-Performance Monitoring and Tuning and Analysis using Performance Monitor,
-SQL Profiler, SQL Server Logs,
-Database Engine, Tuning Advisor, Activity Monitor, Execution Plans,
-Dynamic Management Views, Memory Management, Disk Management,
-Network Throughput, Dataset Caching, Query Analysis,
-Overall SQL Maintenance including backups OLAP Administration

Desired:
-DoD Experience
-Logistics Experience
-Data Warehousing Experience
- MCSA SQL Server 2012, 2014, or 2016 certification
- MCSE Data Management and Analytics certification
 
Job Number: 8653
Job Location: Lexington, KY
Rate: 45-50
Per Diem: Split Possible
Overtime: Exempt
Duration: 9 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Checker

Description:
Design Checker reports to the Engineering Manager the Design Checker is Responsible for checking and verifying engineering drawings and related documents to ensure accuracy, completeness, quality and use of design standards where work is of a complex nature by performing the following duties.

JOB RESPONSIBILITIES

• Verify engineering drawings to best practices and standards.
• Works with engineering personal to resolve discrepancies.
• Redline drawings in electronic format and communicates back to engineering team.
• Must be able to work independently and as a team
• Performs other related tasks as required.

• Must have a solid understanding of Microsoft offices including excel, word, and outlook.
• Must have the ability to read 3D models, drawings, and Bill of Materials
• Must have excellent communication skills
• Associate’s degree (A.A.) or equivalent from two-year college or technical school and 2-5 years of experience or seven plus years related experience and/or training

• Familiarity with NX9
• Familiarity with Teamcenter engineering
• Familiarity with aerospace standards
• Familiarity with Adobe Reader
 
Job Location: Seattle, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer 3

Description:
Seeking a Design and Analysis Engineer 3 located in Huntington Beach, CA 37

RESPONSIBILITIES:
Join a team where Engineering really matters! Client C-17 is seeking a design and analysis (level 3) engineer in Avionics and Flight Controls Engineering on the C-17 Military Airlifter Program in Long Beach/Huntington Beach, CA. Members of the C-17 Avionics & Flight controls (AVFC) team develop and test associated systems in a fast paced Agile engineering environment. Successful candidates will research and integrate new technologies that support the world's finest airlift aircraft. Candidates will have the opportunity to work with Air Force customers using the latest engineering techniques to design and test C-17 aircraft sensors, controls, communications, avionics, and flight systems.

Client, a new business unit from the customer services groups within the company's existing commercial airplanes and defense, space and security business units is a customer-focused, dedicated services business designed to drive greater value. This new organization draws on the best talent and experience from across the business and within the industry to build our services champion culture and create the leading services business.

Responsibilities
- Developing electronic and electrical flight control system solutions
- Participating in modification projects for flight control hardware and software designs based on platform requirements
- Executing systems and software testing to verify operational and functional requirements
- Managing hardware/software suppliers' performance to ensure customer requirements are met
- Supporting resolution of product integration & field operation issues
- Researching new technologies for potential application to C-17
- Developing solutions to technical problems of safety of flight scope and impact
- Applying solid engineering, scientific, and common sense principles in the context of organizational dynamics and real world cost & schedule targets
- Integrating into teams and collaborating with multiple engineering disciplines in solving moderately complex problems concerning fielded airborne avionics and flight control (AFC) systems, involving both hardware and software.
- Participate in full lifecycle projects to develop functional and interface requirements; design hardware, software and interface specifications; test and validate to ensure system designs meet operational and functional requirements; assist in monitoring supplier performance to ensure system integration and compliance with requirements
- Work with customers and their Client representatives to obtain feedback for product enhancements and corrective actions.

EDUCATION:
Accredited Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

WORK HOURS:
Full-Time/First Shift
7 AM - 4 PM
 
Job Number: 170090
Job Location: Huntington Beach, CA
Rate: $61.85-$68.75
Per Diem: Yes
Overtime: Yes
Duration: 6 mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: CHIPTON ROSS
Attention: Melody Mullins
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer 4 (Communication / Network System Design engineer)

Description:
Design and Analysis Engineer 4 (Communication / Network System Design engineer)

Location: Oklahoma City, OK
Duration: 6 months

Job Description:
Client is seeking Communication / Network System Design engineers within Avionics and Flight Controls Engineering organization of the C-17 Military Airlifter Program in Oklahoma City, OK. This is a senior level position in Avionics and Flight Controls Engineering organization of the C-17 Military Airlifter Program in Oklahoma City, OK. Working under the supervision of Lead Engineers, selected candidates will quickly integrate into the team and collaborate with multiple engineering disciplines in the specification, test and support of airborne electronic subsystems including sensors, controls, communications, displays, and processors. The candidate will participate in projects aimed at solving issues and implementing their solutions utilizing Agile methods and processes. The candidate will have the opportunity to work with customers and their client representatives to obtain feedback for product enhancements and corrective actions.

Tasks may include:
Development of electronic and electrical system solutions
Participation in modification projects for basic hardware and software designs based on platform requirements
Execution of systems and software testing to verify operational and functional requirements
Management of hardware/software suppliers' performance to ensure customer requirements are met
Supporting resolution of product integration & aircraft production issues
Researching new technologies for potential application to C-17
An ideal successful candidate possesses technical and engineering skills already developed while attaining his/her Science degree(s) and entry level work experience. Excellent communication skills (written and verbal) and the ability to work in a team environment within a complex organization is a must. The selected candidate will be tasked to develop solutions to technical problems of limited scope and impact; and to apply solid engineering, scientific, and common sense principles in the context of organizational dynamics and real world cost & schedule targets.

The selected candidate will integrate into our Agile Development teams, where personal attributes that include ownership, responsibility, and commitment are a must. The candidate will be expected to interact professionally with customers, suppliers, field representatives, and fellow engineers. The candidate must be dependable, innovative, an independent thinker, and possess excellent & creative problem solving skills. The candidate should have demonstrated 'hands on' capabilities in class projects and/or previous work experience or hobbies. The candidate should also be able to demonstrate through past experience his/her capability to work independently, persevere, and generally 'find a way' when roadblocks are encountered.

Education / Experience:
Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Skill Code:
668-Communication / Network System

If interested then please share updated resume at ravi@iconma.com
 
Job Number: 18-06014
Job Location: Oklahoma City, OK, OK
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Digital / FPGA Design Engineer CA

Description:
Request number: 5262
Date created: 03/28/2018
Job title: Digital/FPGA Design Engineer

Number of openings: 1

Position location: Torrance - CA
Employment type: Contract
OT exempt: No

Shift: 1st
Education Requirement: MS/MA

Minimum Years of Experience: 5
Maximum Hourly Pay Rate: 50
Start Date: 04/02/2018
Tentative End Date: 06/30/2018

Job Description
Function: As the Digital/FPGA Design Engineer, you will be responsible for designing, developing, modifying, and evaluating FPGA's and ASIC's that interface with electronics, electro-mechanical or mechanical components, assemblies or integrated circuitry for actuation systems or Avionics equipment. Includes new design, as well as modification activities that results in significant product enhancement. Activities encompass design, analysis, testing and process development using engineering principles and methods. Technical integrated circuits; and embedded software/firmware design. Designs will have emphasis on high reliability flight critical applications designed to DO254 Level A requirements.


Required skills:
· US Citizenship required. No Dual Citizenship.
· Bachelor of Science in Electronics Engineering
· Five or more years relevant experience
· High-speed digital logic circuit designs for Flight critical applications, Critical Timing analyses.
· Experience working on FPGA or ASIC designs that have been qualified to DO254 Level A.
· VHDL Coding of Complex high-speed digital logic.
· DOORS experience is a plus
 
Job Number: MB-5262
Job Location: Torrance, CA
Rate: 50/hr max
Duration: 3 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Digital Design Engineer

Description:
Job Description:


  • Client is seeking an individual with specialized skills in digital design tools with a firm background in computer operating systems and processes necessary to develop Client and unique digital circuit blocks and apply advanced algorithms in next generation silicon processes.

  • Primary job functions will include system administration, installation, and maintenance of an advanced circuit design environment consisting of commercial- and government- developed electronic design software.

  • Other duties may include supporting analog and RF design, developing standard cell libraries, and testing fabricated chipsets.

  • The selected candidate will represent our Client and DoD customers in outside discussions and technical forums.

  • This position will require some travel and require a security clearance.




Required Skills & Experience


  • A BS Degree in Electrical/Electronic Engineering or Computer Science with five (5) years of experience is required.

  • The applicant must be familiar with the Red Hat enterprise operating system or comparable Linux distributions, installation, maintenance, port security, backup, and shell scripting.

  • Familiarity with installation and maintenance of the advanced Cadence Design Systems IC design flow, Synopsys, and Mentor Graphics tools is required.

  • The applicant must be capable of debugging and troubleshooting electronic design tool installation/maintenance and interaction with 3rd party tools and process design kits.

  • Experience in deriving verification test benches from detailed specifications is required.

  • Familiarity with at least one (1) commercial scripting programming language such as

  • PERL or Python is required.




Desired Skills and Experience

Additional experience in digital circuit design is desired, including: Verilog/VHDL behavioral modeling, Digital IC design for manufacturing (JTAG insertion, test vector generation, Built-In Self-Test), an understanding of physical design issues including layout, familiarity with memory compilers, Cadence Skill code development, and fundamentals of Process Design Kits (PDKs).



Special Requirements/ Certifications:

Must be US citizen and eligible for security clearance. The National Agency Check with Inquiries (NACI) is a background investigation primarily for federal employees who will not have access to classified information. DoD clearance is not required.

Opportunity for contract-to-hire based on worker performance, worker attendance and dependability and client business needs
 
Job Number: 18-12267
Job Location: Dayton, OH
Rate: 0.0USD/Hour
Per Diem: SPLIT
Overtime: Possible
Duration: 2018-08-10 00:00:00.0
Start Date: 2018-05-13 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Cody Grimes
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ELECTRICAL ENGINEER III - ELECTRONIC DESIGN

Description:
Johnson Service Group is currently looking for an Electrical Design Engineer for a Temporary position with our Customer in Warrendale, PA. through 2018

The Electrical Design Engineer will be responsible for design, layout, testing, and evaluation of electrical and electromechanical devices and systems. They will work as part of a multi-disciplinary product development team to assess customer needs, generate and analyze concepts, create requirements and specifications, and perform formal risk assessments. They will design parts and sub-assemblies, participate in cross-functional design reviews, and support the transition of projects from development to manufacturing and field service. They will create schematics, wiring diagrams, system diagrams and PCB layouts as well as check drawings to ensure they meet specification and follow best industry practices. Most importantly, the EE exhibits the desire and ability to collaborate, and excels in teamwork and communication. Our Customer is all about continuous improvement, and this professional thrives in such an environment.



Essential Functions:

Responsible for the design, and analysis of complex level electrical systems, equipment and PCB assemblies.
Conduct feasibility studies of new and modified designs exercising judgment within broadly defined practices and policies in selecting methods, techniques, and evaluation criteria.
Work on complex multi-product level problems where analysis of situations or data requires an in-depth evaluation of various factors.
Direct support personnel in the preparation of prototype fabrication.
Participate in multi-disciplinary technical teams to research, develop, test and evaluate solutions.
Evaluate issues and failures to determine root cause and potential solutions
Work on intermediate level component and subassembly problems where analysis of situations or data requires an in-depth evaluation of various factors.
Collaborate with software, mechanical, testing and other cross functional teams to perform FMEAs and risk assessments.
Mentoring and coordination of other engineers.
Direct support of customers, to include travel to off-site locations as necessary to evaluate field issues.
Educational Requirements:

BS degree in Electrical Engineering or equivalent
Required Knowledge and Skills:

4+ years of Electrical Engineering experience
Experience the electrical and cross functional aspects of a formal product development environment including schematic capture, PCB development, Bill of Materials, MRP systems and associated tools (including Orcad or Altium).
Demonstrated experience designing electrical and robotic subassemblies and systems
Understanding of architectural design concepts of machine controls and I/O systems
Able to effectively solve problems, work independently on system level designs and multi-task as required.
Good interpersonal and communication skills
Self-starter, capable of working independently as well as building strong cross functional collaborative relationships.
Must be able to work in a team environment and assist cross functional teams with the debugging of complex issues.
The candidate must be highly motivated to work in a fast-paced environment.
Strong written and verbal communication skills.
Proficient with the Microsoft Office Suite of Products.
Must be legally authorized to work in United States
Preferred Knowledge and Skills:

Familiarity with PCB development including footprint generation and PCB layout a plus.
Familiarity with motion controllers, servo- and stepper- motors, and networked I/O systems a plus.
Experience with Product Lifecycle Management (PLM) tools and ECR, ECO processes.
Experience in LabView
Working experience with FDA regulated, ISO13485, or other highly regulated environments.
Work Conditions:

Office Environment
 
Job Number: 364448
Job Location: Warrendale, PA
Per Diem: Possible
Overtime: Possible
Duration: 12/2018 +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical CAD Designer - Level II

Description:
Electrical CAD Designer - Level II

Cape Canaveral Air Force Station, FL
1 Year Contract
Pay Rate: DOE

The CAD Drafter will document in ACAD Launch facility electrical, communication and IT detail drawings. Will work with E&I Electrical and Communication Engineers to produce drawings required to perform modifications to existing and for new designs within ULA launch facilities. This position is in support of United Launch Alliance Launch Operations at Cape Canaveral Air Force Station Florida for the Atlas V, Delta IV and future Vulcan launch vehicles. He/she will gather and organize information, perform research and prepare sketches and detailed drawings for facility modification projects. He/she will perform field walk-downs and review and revise electronic CAD files from a variety of native drawing databases. This position requires knowledge of civil and structural design, drafting practices as well as a sound practical knowledge of engineering principles and industry standards. Candidate will be responsible for quality of design documents ensuring all are prepared & checked in accordance with applicable procedures.
 
Job Number: 8923
Job Location: Cape Canaveral, FL
Rate: DOE
Per Diem: Possible Split
Overtime: Exempt
Duration: 1 Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical CAD Designer Level 2

Description:
• The CAD Drafter will document in ACAD Launch facility electrical, communication and IT detail drawings.

• Will work with E&I Electrical and Communication Engineers to produce drawings required to perform modifications to existing and for new designs for launch facilities.

• This position is in support of Launch Operations at Cape Canaveral Air Force Station Florida for the Atlas V, Delta IV and future Vulcan launch vehicles.

• He/she will gather and organize information, perform research and prepare sketches and detailed drawings for facility modification projects.

• He/she will perform field walk-downs and review and revise electronic CAD files from a variety of native drawing databases.

• This position requires knowledge of civil and structural design, drafting practices as well as a sound practical knowledge of engineering principles and industry standards.

• Candidate will be responsible for quality of design documents ensuring all are prepared & checked in accordance with applicable procedures.
 
Job Location: Cape Canaveral, FL
Rate: open
Per Diem: possible
Overtime: possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: ALLEGIANCE CONSULTING INC
Attention: Scott
Address: 10822 W TOLLER DR STE 250
City, State: LITTLETON, CO 80127
Phone: 720/947-9208
Website: www.acinow.net

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
Location: Savannah, GA
Rate: $60.00 - $63.00/HR
Duration: Long Term Contract
Shift: 1st Shift


Unique Skills:
- Candidate shall have experience in one or more of the following: Electronic hardware design, Data acquisition system design, Industrial process measurement

Education:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.10 yrs in the specific technical discipline or 15 yrs broad engineering experience in several technical disciplines with Bachelors, or 8 yrs in the specific technical discipline with Masters, or 6 yrs in the specific technical discipline with PhD.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Company products and services

Principal Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 2. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill
and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7701
Job Location: Savannah, GA
Rate: $60.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer (Hood River, WA)

Description:
Join an Industry leader in the UAV field that understands the importance of a work life balance. We are located in Hood River which means you will be working in one of the most beautiful places in the US and an resort area for some of the best outdoor activities in Oregon. We work a 9/80 schedule which means 26 three day weekends a year. You will be working on challenging and interesting projects for a dynamic company that values a Pioneering spirit.

Will be responsible for implementing electrical system architecture, identifying new technologies and develop design requirements. Allocates requirements across system architecture and designs and conducts trade studies. Monitors subsystem design development activities for architectural consistency. Performs and/or evaluates risk assessments and generates or approves risk mitigation plans and strategies.
Decomposes system requirements and evaluates sub system design development. De-conflicts and resolves module-level requirements allocations. Creates and/or reviews electrical system architectures and develops detailed electrical hardware and firmware designs. Establishes the electronic hardware interface designs and review and monitors design consistency. Develops and/or reviews and approves electronic hardware documentation packages.

QUALIFICATIONS
Do you have experience with Analog, Digital, Power Distribution and EMI/EMC fundamentals-concepts within circuit design? Familiar with Rigid PCB technologies (IPC Standards, PCB fabrication, PCBA Assembly processes and documentation standards, AS9100 standards), Ethernet, RS232 and VeriLog? Familiarization with Flex and Rigid-Flex Technologies would be a plus.

Education & Experience
Typical experience: 9-13 years in an engineering classification with a Bachelor's degree or 7-11 years experience in an engineering classification with a Master's degree

Specific Experience Required
CAD Tools: Preferred experience with Mentor Graphics DxDesigner, Mentor Graphics
Hyperlinx - Signal Integrity simulation, Power Integrity simulation and Circuit Analysis tools (E.g. LTSpice).
Test and Debug: Mixed Signal Oscilloscope, Spectrum Analyzer, Digital Multi-meter, Programmable Load and other test tools.

Other requirements: Proficiency in Word, Excel, PowerPoint, Outlook and Visio.
Programming skills(added bonus): FPGA SOC/microcontroller, Verilog, Embedded-C.

Email Resume in MS Word Doc. Format to: Albert.Peniche@Yoh.com

ALBERT PENICHE
SR. TECHNICAL RECRUITER, AEROSPACE & DEFENSE
YOH AVIATION, A DAY & ZIMMERMANN COMPANY
D 314-791-1565
albert.peniche@yoh.com
 
Job Number: APEENGR
Job Location: Bingen, WA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: LT - Direct
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: YOH SERVICES
Attention: Albert Peniche
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/791-1565
800 Phone: 800/298-0666
Website: jobs.yoh.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer/PCB Design Engineer

Description:
--STEPPER MOTOR EXPERIENCE REQUIRED--

Senior electronics designer with a solid electronic product design skills used in complex electromechanical projects involving maintenance of life of on-market products. May lead small teams of engineers in the completion of project goals. Full responsibility of the design from concept through prototyping and leading into integration in final production line. Must have the technical ability to oversee and guide staff towards the completion of project goals. Applies familiarity with the FDA’s guidance on medical device development to ensure compliance.

Provide Core Electrical Engineering expertise:
a)Circuit design and analysis skillset, including in-depth understanding of technologies currently used in the industry.
b)Analog and digital circuit design
c)Expertise in computer-aided electrical design tools (eCAD)
d)Testing circuit performance
Use experience in board level (PWA) manufacturing and current practices, including
a)Analyzing component specifications and creating internal specifications as needed
b)Interacting with new and existing vendors and managing vendor relationships
c)Managing eCAD outputs per customer practices and ensuring that customer designs are properly executed by external contract manufacturers in support of R&D activities.

About Enea
Enea is a global supplier of network software platforms and world class services, with a vision of helping customers develop amazing functions in a connected society. We are committed to working together with customers and leading hardware vendors as a key contributor in the open source community, developing and hardening optimal software solutions. Every day, more than three billion people around the globe rely on our technologies in a wide range of applications in multiple verticals – from Telecom and Automotive, to Medical and Avionics. We have offices in Europe, North America and Asia, and are listed on Nasdaq Stockholm. Discover more at www.enea.com and start a conversation at info@enea.com.
 
Job Number: 575
Job Location: Chicago, Il
Rate: DOE
Per Diem: YES
Overtime: YES
Duration: 1 year
Start Date: April 23, 2018
Input Date: 11/14/2020
Firm Name: ENEA SOFTWARE AND SERVICES
Attention: Walter Walonoski
Address: 2555 E CAMELBACK RD STE 280
City, State: PHOENIX, AZ 85016
Phone: 480/753-9200
Fax Phone: 480/753-6400
Website: www.enea.com/services/expertise

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineering Manager

Description:
Electrical Engineering Manager needed for an immediate full time opportunity with our client in Burlington MA. As a key contributor you will serve a dual-role taking on technical engineering responsibilities and manage, mentor and develop a small staff of electrical and firmware engineers. Please apply below and call me today for immediate consideration. Thank you.



James St. Pierre - Branch Manager - Nesco Resource, LLC - 603.417.3001 - jstpierre@nescoresource.com



Key Responsibilities and Activities


  • Provides electrical engineering recommendations and technical support on electrical engineering reviews, strategic plans, and projects

  • Assists with allocation, budgeting, resource planning, and scheduling

  • Manages unit and development cost estimations and helps determine affordable and reliable material sources

  • Ensures on-time product development by collaborating with other leaders to estimate reasonable and precise schedules and solve problems quickly

  • Streamlines production while meeting compliance and safety guidelines

  • Creates production, quality validation, and evaluation requirements and tests and troubleshoots production dilemmas

  • Establishes technical standards in reviews, documentations, and designs


Required Skills and Experience


  • Bachelor's Degree in Electrical Engineering with 7+ years' experience in the automotive, aviation, or robotics industry

  • Experience with multiple hybrid and electric vehicle electronic architectures

  • Experience with CANbus

  • Experience with schematic capture and PCB layout using modern EDA tools

  • Experience with automotive, robotics or aviation/aerospace wiring harness and connector component sourcing

  • Experience with automotive, robotics or aviation/aerospace product development

  • Experience with design control and change management techniques


Desired Skills and Experience


  • Master's Degree in Electrical Engineering or related field

  • Knowledge of Embedded coder, Simulink, autocode generation process, RTE generation, and bootloaders

  • Familiarity with the ISO 26262 specification




 
Job Number: 18-13443
Job Location: Woburn, MA
Rate: 140000.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2018-04-23 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: James St Pierre
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Project Engineer

Description:
**This is a contract assignment, projected for 12 months, unless extended**
**This position specifically requires US Citizenship**

Description/Comment:
Manages a team and provides direction on research, development, design, and testing of electrical components, PC Board Layout, Electronics Packaging equipment, facilities, systems, products and networks for commercial, industrial and governmental purposes.


Additional Job Details:
Our client is looking for highly motivated and technically sound individuals to join us as an Electrical Project Engineer. You will be supporting programs in developing new electronic controller products and will learn aspects of engineering and program management and have the opportunity to see the entire design build and test life cycle. Electrical products are typically controllers driving rotating machinery (pumps/fans/actuators) and have built in sensor/data acquisition systems with serial interface controls. They are designed for long life, high reliability and operate in severe space radiation environments.

Some of these products include:
process controllers, sensor signal conditioning, DC/DC Converters, FPGA based digital controllers, brushless DC motor controllers, actuator control/drives, hardware based closed loop system process control, and more.

Candidates shall have 3 to 7 yrs experience in new electronics design and/or electronics testing.
Candidates must have the desire and energy to ability to manage/lead the Integrated Product Development Team subject matter experts to ensure the electronics are designed, tested and verified to the requirements while controlling the project budget and scope.

Project Management Professional training is a plus.

Education: Bachelor's 
 
Job Number: CT 41973
Job Location: Windsor Locks, CT
Rate: 55.00
Per Diem: Possible
Overtime: Possible
Duration: 12 months
Start Date: 3 weeks
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Chris
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Project Engineer

Description:
Electrical Project Engineer

Company: UTAS
Location: Windsor Locks, CT
Pay Rate: $58/hr
Duration: 12 Month W2 Contract
Shift: First
Openings: 1
Travel: Potential travel of 1 trip per quarter.
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**
*NO RELOCATION COMPENSATION**

Description:
Manages a team and provides direction on research, development, design, and testing of electrical components, PC Board Layout, Electronics Packaging equipment, facilities, systems, products and networks for commercial, industrial and governmental purposes.

Additional Job Details
-We are now looking for highly motivated and technically sound individuals to join us as an Electrical Project Engineer.
-You will be supporting programs in developing new electronic controller products and will learn aspects of engineering and program management and have the opportunity to see the entire design build and test life cycle.
-Electrical products are typically controllers driving rotating machinery (pumps/fans/actuators) and have built in sensor/data acquisition systems with serial interface controls. They are designed for long life, high reliability and operate in severe space radiation environments.
-Some of these products include: process controllers, sensor signal conditioning, DC/DC Converters, FPGA based digital controllers, brushless DC motor controllers, actuator control/drives, hardware based closed loop system process control, and more.
-Candidates shall have 3 to 7 yrs experience in new electronics design and/or electronics testing.
-Candidates must have the desire and energy to ability to manage/lead the Integrated Product Development Team subject matter experts to ensure the electronics are designed, tested and verified to the requirements while controlling the project budget and scope.
-Project Management Professional training is a plus.

Requirements:
-Bachelors degree or higher
-Strong project/program management experience
-3-7+ years of electronics design/testing
 
Job Number: 8921
Job Location: Windsor Locks, CT
Rate: 58
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Design & Analysis Engineer V - (AZ)

Description:
ACTIVE SECRET CLEARANCE REQUIRED TO START.

Avionics Systems Engineer responsible for avionics software/hardware integration on the Apache Area Weapon System (AWS). Responsibilities include complex avionics development activities including pursuing advanced technologies, performing trade studies, developing technical approaches, decomposition, flowdown and traceability of system and software requirements, and system/subsystem verification testing. The purpose of the work is to perform gun scoring and analysis. Will be a member of a cross functional integrated product team. Responsible for close coordination with US Army and international customers to ensure implementation is responsive to requirements, using appropriate project integration methodologies, and project management practices. Work with customers to develop and document complex electronic and electrical system requirements. Analyze and translate requirements into system, hardware and software designs and interface specifications. Test and validate to ensure system designs meet operational and functional requirements. Monitor supplier performance to ensure system integration and compliance with requirements. Solve problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Research specific technology advances for potential application to company business needs.

The ideal candidate must be able to design, develop, test and present complex electrical and networking systems that utilize sensor technology. Exposure to missile, gun, or rocket technology is highly desired. Control theory expertise desired.

Bachelor's 14 or more years' experience, Master's with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

ACS Group (formerly 'Comforce')
 
Job Number: EEaz
Job Location: Mesa, AZ
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Wiring Design Engineer

Description:
This position is for an engineer that will perform wiring design and integration tasks associated with the Electrical Systems. This position will report directly to the Manager, Electrical Wiring Design.

Experience:
Seeking design engineers with experience in the creation and maintenance of aircraft systems wiring diagrams, parts lists, and electrical harness drawings. This involves detailed understanding and specification of aircraft electrical harness components selection, harness design requirements, harness level system separation, and system integration at the wiring level.
The potential candidate must be capable of working independently, must possess excellent coordination skills, and must work well in a multi-functional team environment.

Duties and Responsibilities:
Background and demonstrated ability is required in the technical areas listed below.

­ Electrical Wiring and Harness Design
o Wiring standards and ‘best practice’ design
o Wire gauge and type consideration (shield coverage, over-braid, wire twists/foot, temperature, bend radius, insulation, sleeves, etc.)
o Connector and backshell qualification and selection (EMI, high temperature, high vibration, environmentally sealed/hermetic, connector material compatibility, pin selection, etc.)
o Miscellaneous electrical harness hardware selection (splices, solder sleeves, grounding blocks, tie wraps, terminal lugs, etc)
o Development of configuration managed, electrical harness design packages
o Parts lists, bill of materials, parts and standards callout
o Fabrication techniques for integrated wiring assemblies
o Cost, weight, and schedule trade-offs
­ Wire Diagram and harness drawing generation
o Interpretation of system interface control data to conceptual schematics
o Evolution of conceptual schematics into aircraft wiring information
o Use of wiring design tool to generate wiring diagrams and harness drawings
­ System integration as it applies to complex wiring assemblies
o Good overall working knowledge of aircraft electrical/electronic systems
o Implementation of wiring and harness level system separation to avoid common cause failure modes, including electrical signal and power separation
o Databus and digital equipment interface considerations

Education, Work Experience, Certification and/or Licensure:
­ BSEE or equivalent and minimum of 5 years applicable work experience
­ Experience with IGE-XAO, Mentor Graphics, or similar wiring design tool
­ Good working knowledge with Teamcenter, Microsoft Office suite, and SAP
­ Experience with Catia V5 is a plus
­ Experience with electrical harness routing and installation requirements is a plus
 
Job Number: 28-020
Job Location: Greensboro, NC
Rate: $45-$50
Per Diem: Yes
Overtime: Yes
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical/Electronic Systems Design & Analysis Engineer III- (HB)

Description:
- Developing electronic and electrical flight control system solutions
- Participating in modification projects for flight control hardware and software designs based on platform requirements
- Executing systems and software testing to verify operational and functional requirements
- Managing hardware/software suppliers' performance to ensure customer requirements are met
- Supporting resolution of product integration & field operation issues
- Researching new technologies for potential application to C-17
- Developing solutions to technical problems of safety of flight scope and impact
- Applying solid engineering, scientific, and common sense principles in the context of organizational dynamics and real world cost & schedule targets
- Integrating into teams and collaborating with multiple engineering disciplines in solving moderately complex problems concerning fielded airborne avionics and flight control (AFC) systems, involving both hardware and software.
- Participate in full lifecycle projects to develop functional and interface requirements; design hardware, software and interface specifications; test and validate to ensure system designs meet operational and functional requirements; assist in monitoring supplier performance to ensure system integration and compliance with requirements
- Work with customers and their representatives to obtain feedback for product enhancements and corrective actions.

Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

ACS Group (formerly 'Comforce')
 
Job Number: EEIIIHB
Job Location: Huntington Beach, CA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical/Electronic Systems Design & Analysis Engineer IV - (OK)

Description:
Must be able to obtain a Security Clearance.

We are seeking Communication / Network System Design engineers within Avionics and Flight Controls Engineering organization of the Military Airlifter Program in Oklahoma City, OK. This is a senior level position in Avionics and Flight Controls Engineering organization of the Military Airlifter Program in Oklahoma City, OK. Working under the supervision of Lead Engineers, selected candidates will quickly integrate into the team and collaborate with multiple engineering disciplines in the specification, test and support of airborne electronic subsystems including sensors, controls, communications, displays, and processors. The candidate will participate in projects aimed at solving issues and implementing their solutions utilizing Agile methods and processes. The candidate will have the opportunity to work with customers and their Boeing representatives to obtain feedback for product enhancements and corrective actions.

Tasks may include:
Development of electronic and electrical system solutions
Participation in modification projects for basic hardware and software designs based on platform requirements
Execution of systems and software testing to verify operational and functional requirements
Management of hardware/software suppliers' performance to ensure customer requirements are met
Supporting resolution of product integration & aircraft production issues

An ideal successful candidate possesses technical and engineering skills already developed while attaining his/her Science degree(s) and entry level work experience. Excellent communication skills (written and verbal) and the ability to work in a team environment within a complex organization is a must. The selected candidate will be tasked to develop solutions to technical problems of limited scope and impact; and to apply solid engineering, scientific, and common sense principles in the context of organizational dynamics and real world cost & schedule targets.

The selected candidate will integrate into our Agile Development teams, where personal attributes that include ownership, responsibility, and commitment are a must. The candidate will be expected to interact professionally with customers, suppliers, field representatives, and fellow engineers. The candidate must be dependable, innovative, an independent thinker, and possess excellent & creative problem solving skills. The candidate should have demonstrated 'hands on' capabilities in class projects and/or previous work experience or hobbies. The candidate should also be able to demonstrate through past experience his/her capability to work independently, persevere, and generally 'find a way' when roadblocks are encountered.

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

ACS Group (formerly 'Comforce')
 
Job Number: EEOK29919
Job Location: Oklahoma City, OK
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electro-Mechanical Design Engineer

Description:
Location: Orlando, FL
Rate: $50.00 - $55.00/HR
Duration: 6 month contract position
Schedule: 9/80

**Candidates must be U.S. Citizens**

Duties:
- An Electromechanical Design Engineer is responsible for the design, documentation and production floor support of hardware (missile electronics, missile electrical cabling, airborne support equipment, ground support equipment and test sets.
- Additional duties include investigation of discrepant hardware and test anomalies.

Skills:
Required:
- Design experience with electrical cables, test sets, breakout boxes, 19” support equipment rack design
- Proficiency with Creo Parametric 2.0 Cabling and Intralink.
- Proficiency with ASME Y14.5M-1994 and generating detailed engineering drawings.
- Proficiency with reading schematics for electrical cable assemblies in order to define and select connectors, backshells, splices, wiring, etc.
- Basic computer skills and a working knowledge of Microsoft Office products (Word and Excel)
- Compliance to quality and safety policies at all times!
- Must be a US Citizen
- Physical Requirements – This work requires delicate handling, reaching, light lifting and may require a combination of sitting and standing as well as walking between test locations and occasional use of small step-ladders.

Desired:
- Experience with design of flexible and semi-rigid RF cables

Education:
- Must have at minimum a Bachelor of Science degree in an Engineering related discipline.
 
Job Number: 8769
Job Location: Orlando, FL
Rate: $50.00 - $55.00/HR
Per Diem: Per Diem Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electromechanical Design Engineer FL

Description:
161672/7809667
Job Title: Electromechanical Design Engineer

Number of Positions: 1

Remaining Positions: 1

55/hr max

Duties:
** Candidates must be U.S. Citizens **



An Electromechanical Design Engineer is responsible for the design, documentation and production floor support of hardware (missile electronics, missile electrical cabling, airborne support equipment, ground support equipment and test sets.


Additional duties include investigation of discrepant hardware and test anomalies.
Skills:
Required:

Design experience with electrical cables, test sets, breakout boxes, 19” support equipment rack design
Proficiency with Creo Parametric 2.0 Cabling and Intralink.
Proficiency with ASME Y14.5M-1994 and generating detailed engineering drawings.
Proficiency with reading schematics for electrical cable assemblies in order to define and select connectors, backshells, splices, wiring, etc.
Basic computer skills and a working knowledge of Microsoft Office products (Word and Excel)
Compliance to quality and safety policies at all times!
Must be a US Citizen
Physical Requirements – This work requires delicate handling, reaching, light lifting and may require a combination of sitting and standing as well as walking between test locations and occasional use of small step-ladders.
Desired:

Experience with design of flexible and semi-rigid RF cables
Education:
Must have at minimum a Bachelor of Science degree in an Engineering related discipline.

Skills:
Required
DESIGN ENGINEERENGINEEREXCELMICROSOFT OFFICEWORD
Additional
ANALOG SILICONAPQPCABLINGCREODOCUMENTATIONGROUND SUPPORT EQUIPMENTMICROSOFT EXCELMICROSOFT WORDMISSILEPARAMETRICRACK DESIGNREADING SCHEMATICSRFSCHEMATICSWIRING

Minimum Degree Required: Associate's Degree (Community College, MBO)

State/Province: Florida
City/Town: Orlando

Start Date: 03/26/2018 Hours Per Week: 40.00
Est. End Date: 09/28/2018 Hours Per Day: 8.00
Schedule Notes: Days Per Week: 5.00
 
Job Number: MB-A7809667
Job Location: Orlando, FL
Rate: 55/hr max
Per Diem: no
Duration: 6 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic Systems Design & Analysis Engineer IV - (OK)

Description:
Active Secret Clearance, NOT REQUIRED to start.

Candidate to perform Ground Support software modification and integration. Familiarity with ATLAS, test equipment, LabWindows CVI and ability to troubleshoot electronics required.

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

ACS Group (formerly 'Comforce')
 
Job Number: EEOK29921
Job Location: Oklahoma City, OK
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic Systems Design & Analysis Engineers/Software

Description:
Seeking engineers on the Military Airlifter Program in Oklahoma City, OK. Candidate to perform Ground Support software modification and integration. Familiarity with ATLAS, test equipment, LabWindows CVI and ability to troubleshoot electronics required. Must have Engineering Degree and be able to obtain security clearance

Email resumes to: mmccarthy@pdstech.com
 
Job Number: BO-OK-Electronic Atlas
Job Location: Oklahoma City, OK
Rate: $70.00-$75.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 6 Months+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Mary McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer 3 (Hood River, WA)

Description:
Embedded Software Engineer 3

JOB DESCRIPTION
As a member of the Software Engineering department you will:
• Be a key player in an agile software development team
• Solve challenging engineering problems and participate in the development of real-time safety critical embedded software using industry best practices
• Ensure software testability, test coverage and test maintainability
• Be responsible for assuring the delivery of high quality products and software services
• Prototype and integrate software solutions on target hardware platforms
• Consult and support fellow electronic hardware engineers and other engineering staff
• Take responsibility for achieving goals and meeting project deadlines
• Have fun in a tight knit team while working on a game changing UAS!

QUALIFICATIONS
• Experience with compiled programming languages, C/C++.
• Understanding of computing machinery (memory, secondary storage, I/O, FPGA, processor, data bus, etc.) as it relates to software.
• Experience with microcontroller/assembly/firmware development.
• Experience designing for resource constrained systems and experience with firmware and embedded systems software development.
• Strong problem-solving abilities, careful attention to detail, open to taking direction and adapting to course corrections.
• Experience with hands-on troubleshooting hardware and debugging software
• Ideal candidate has experience with safety critical systems.
• Excellent communication and interpersonal skills; able to work well individually or in a team.
• Ability to independently identify and address tasks
• Strong organization and time management skills
• Willingness to learn and contribute to a team environment

Email Resume in MS Word Doc. Format to: Albert.Peniche@Yoh.com

ALBERT PENICHE
SR. TECHNICAL RECRUITER, AEROSPACE & DEFENSE
YOH AVIATION, A DAY & ZIMMERMANN COMPANY
D 314-791-1565
albert.peniche@yoh.com
 
Job Number: APEMBED
Job Location: Bingen, WA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: LT - Direct
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: YOH SERVICES
Attention: Albert Peniche
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/791-1565
800 Phone: 800/298-0666
Website: jobs.yoh.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Systems Engineer

Description:
Embedded Systems Engineer needed to join development team.



Job Responsibilities

  • Aid in the development of the Vehicle Control Unit (VCU) and/or Electronic Control Unit (ECU);

  • Create/refine finite state machines, and implement controllers for vehicle systems in software;

  • Aid in the development of a system for distributed control of an engine, electric motors, and actuators over a CAN network;

  • Support the design of a wing fold interface system working with existing electromechanical actuators/sensors;

  • Support definition of the data interface specification (e.g. CAN, RS-485, etc.);

  • Integrate microcontroller software for CAN bus based actuation and sensing per DO-178 (potentially implemented via Simulink and Stateflow);

  • Address custom CAN messaging and VCU communications with hand coding as required;

  • Participate as a key player in the design-build-test process, including conceptual, preliminary and detailed design, requirements definition, design reviews, prototyping, and testing;

  • Coordinate and communicate effectively with other engineers, technical personnel, and management;

  • Support and participate in testing activities component, drive, and/or flight as needed, including test plan creation, data analysis, and test report generation and documentation;

  • Support the Certification Director with compliance and certification activities and best practices, including design, test, and analysis documentation, internal and external audits, and other activities as needed.


Qualifications


  • The candidate must have:

    • A Bachelor's degree in Computer, Electrical, Mechanical, or Aerospace Engineering and 5+ years technical work experience, or;

    • A Master's degree in Computer, Electrical, Mechanical, or Aerospace Engineering and 3+ years technical work experience.



  • Proven experience with robust software development cycles: taking software from concept through detailed development, executing code on targets, and testing to internal/external requirements;

  • Proven experience developing software for automobiles, particularly for vehicle control;

  • Experience with CAN messaging protocol;

  • Outstanding organization, analytical, and problem solving skills;

  • Excellent written and verbal communication skills, as well as presentation skills;

  • Software Experience: C/C++.


Highly Desired Qualifications


  • Experience with software design, documentation, and testing per DO-178B/C;

  • Functional safety experience with ISO-26262 or IEC 61508;

  • Formal training or practical experience with software revision control techniques and tools;

  • Experience with ASTM F2245 or FMVSS;

  • Experience with LabVIEW or other real time data acquisition software;

  • Experience programming CPLDs or other logic devices;

  • Familiarity with modern electrical design layout tools such as Altium or Cadence products;

  • Knowledge or expertise in CAN Aerospace, CANopen, SAE J1939, ARINC-429 ARINC-825protocols;

  • Familiarity with Python or Perl;

  • Familiarity with Fortran.




 
Job Number: 18-13621
Job Location: Woburn, MA
Rate: 130000.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2018-04-05 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Hong Lu
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Electromechanical - 3 / active secret preferred / CREO / electronic packaging CA

Description:
1631
Engineer Electromechanical - 3 (Job Number: 18002041)

Number of Openings: 1

Location(s): United States-California-Redondo Beach


Shift: 1st Shift

Target Start Date: Mar 19, 2018

Target End Date: Mar 15, 2019

Pay Rate: $58/hr. - $60/hr.

Work Week: 9/80

Location: Redondo Beach, CA

Duration: 1 year

The responsibilities include mechanical design & analysis using computer-aided design (CAD), conducting packaging trades, tolerance and interference analyses, generating drawing packages & associated electronic data, and supporting the fabrication, assembly and test of the hardware.


Basic Qualifications:

•5 Years with Bachelors in Science; 3 Years with Masters; 0 Years with PhD.
•A Bachelor of Science degree in a STEM (Science, Technology, Engineering or Math) discipline
•Electronic packaging, CAD, or mechanical design experience in an aerospace environment
•Demonstrated technical skills with experience supporting a multi-disciplined team
•Experience working with different partners across organizations and programs
•Proficient in performing tolerance and interference analyses
•Experience in generating and releasing product detail and assembly drawings
•Experience with PTC Creo / Intralink software applications



Preferred Qualifications:

•A Master’s Degree in Mechanical or Aerospace Engineering and 4+ years of engineering experience in an aerospace environment
•Experience with electronic packaging / mechanical design for airborne & space applications
•Electronics design development and sustaining experience spanning cradle to grave
•Experience with Enovia PLM software application
•Proficiency with electrical design, electronics manufacturing processes and qualification activities
•Familiarity with research and development of advanced packaging technologies
•Active DoD Secret or Top Secret, and/or SCI clearance
 
Job Number: MB-1631
Job Location: Redondo Beach, CA
Rate: 58-60/hr
Per Diem: no
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FMS SYSTEMS / SOFTWARE ENGINEER

Description:
ENEA is working with a client to provide System Software Analysis on Flight Management Systems (FMS). We are looking for an engineer with direct FMS experience and has functional expertise in one of the following areas: Performance, Navigation, Guidance, or Communications/DataLink.
RESPONSIBILITIES:
• Perform system optimization and assess overall performance through the use of in-house or custom-developed analysis tools.
• Compare the performance of architecture variants and conduct trade studies.
• Mentor and work with junior analysts as part of larger study teams.
• Apply broad and/or deep experience with customer aerospace systems and technologies in one or more specific functional areas (Performance, Navigation, Guidance, or Communication/DataLink).
• Provide expert advice within a specific technology or functional area (Performance, Navigation, Guidance, or Communication/DataLink).
• Provide support for growing modeling and analysis capabilities in new support areas.
• Interact independently with program office and customer organizations.
• Creatively and effectively apply analysis to problems as needed.
BASIC QUALIFICATIONS:
• BS degree in Engineering (preferably Computer Science or Electrical Engineering)
• 10+ years’ experience in Systems and Software Engineering.
• Substantial experience or background in one of the following areas: architecture performance analysis and modeling; optimization and/or decision support; communications systems analysis; electronics systems analysis, software and/or simulation development.
• Excellent written and verbal communication skills.
• Dependability and good interpersonal skills.

About Enea
Enea is a global supplier of network software platforms and world class services, with a vision of helping customers develop amazing functions in a connected society. We are committed to working together with customers and leading hardware vendors as a key contributor in the open source community, developing and hardening optimal software solutions. Every day, more than three billion people around the globe rely on our technologies in a wide range of applications in multiple verticals – from Telecom and Automotive to Medical and Avionics. We have offices in Europe, North America, and Asia, and are listed on Nasdaq Stockholm. Discover more at www.enea.com and start a conversation at info@enea.com.
Enea Software and Services, Inc.

(Enea) provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Enea complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.
Enea Software and Services, Inc. expressly prohibits any form of workplace harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. Improper interference with the ability of Enea’s employees to perform their job duties may result in discipline up to and including discharge.
 
Job Number: WW011118GE
Job Location: Phoenix, AZ
Rate: DOE
Per Diem: YES
Overtime: YES
Duration: 3-6 MONTHS
Start Date: 1.22.18
Input Date: 11/14/2020
Firm Name: ENEA SOFTWARE AND SERVICES
Attention: Walter Walonoski
Address: 2555 E CAMELBACK RD STE 280
City, State: PHOENIX, AZ 85016
Phone: 480/753-9200
Fax Phone: 480/753-6400
Website: www.enea.com/services/expertise

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Help Desk Operations Level 2 (REQUIRES ACTIVE SECRET CLEARANCE)

Description:
Help Desk Operations Level 2 (REQUIRES ACTIVE SECRET CLEARANCE)

Location: Lexington, KY
Pay Rate: DOE ($30/hr - $40/hr)
Duration: 6 month W2 contract
Travel: Yes, US only, military installations
Shift: First, 5/40, exempt OT
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**
**MUST have an ACTIVE DoD SECRET CLEARANCE; INTERIM CLEARANCE SUFFICIENT**

Description
-Entry to mid level career position. Ideal candidate will have experience in a customer service support role.
-Position will support logistic / supply chain / acquisition web site application users spread over the continental US as well as overseas locations.
-Candidate will work closely with software and system engineers to design, test, deploy, and troubleshoot web applications for a Department Of Defense customer supporting Special Operations Command.
-Written and oral communication skills are critical.
-This is not a remote position.
-Business takes place at 5749 Briar Hill Road in Lexington, Kentucky.
-Candidate can start with an interim clearance.
-No personal portable electronic devices (e.g. cell phones) are allowed into the building where business takes place.

Skill/Experience/Education (Mandatory):
-Tier 1 Customer Service Support (1-3 years' experience required)
-Oral and Written Communication / Good to Excellent Grammar

Desired:
-Basic knowledge of relational databases and the ability to write standard SQL statements (1-3 years' experience desired) – (Basic SQL Query Knowledge)
-CompTIA Security+ certificate (desired)
-User Story Creation
-Agile SDLC Experience
-Technical Writing
-Software Testing
-Software Training
 
Job Number: 8673
Job Location: Lexington, KY
Rate: 30-40
Per Diem: Split Possible
Overtime: Exempt
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Instrument Engineer (OK)

Description:
Contract Instrument Engineer

Our Client in Ponca City, Oklahoma (Refinery) has a crude oil processing capacity of 203 MBPD. Both foreign and domestic crudes are delivered by pipeline from Canada, Oklahoma, Kansas and Texas. The refinery's facilities include fluid catalytic cracking, delayed coking and hydro-desulfurization units that enable it to produce high ratios of gasoline and diesel fuel from crude oil. Finished petroleum products are shipped by truck, rail and Company-owned and common carrier pipelines to markets throughout the mid-continent region. Operations are run 24 hours per day, seven days per week.

Major Products: Gasoline, Diesel, Jet fuel, Kerosene, Heating oils.

Capacities: Crude oil and Other Charge Capacity: 203,000 BPD; Gasoline Production Capacity: 110,000 BPD; Distillate Production Capacity: 85,000 BPD.

Description:
The Instrument Engineer is responsible for the design, engineering, and implementation of process instrumentation and control systems from initial conception through commissioning.

The Instrument Engineer is responsible for design and engineering that provide the most reliable and cost- effective instrument and control systems. The Instrument Engineer also provides consulting services to process engineers in developing process design specifications, develops operating and training manuals for mechanical and process personnel, and participates in training operating personnel.

The Instrument Engineer writes purchase and construction specifications and writes and performs Factory Acceptance Tests procedures.

The Instrument Engineer specifies, procures, and configures Distributed Control Systems, and field hardware such as transmitters, control valves, and electronic transmission systems.

The Instrument Engineer utilizes American Petroleum Institute (API) Standards, Instrumentation, Systems and Automation Society (ISA) Standards, National Fire Protection Association (NFPA), and Client standards and practices to perform the above functions..

Responsibilities may include:
• Instrumentation and controls capital projects engineering including front-end-loading, cost estimates, specifications and oversight of detailed design.
• Identifying areas where instrumentation/controls can improve plant operation and profitability
• Owning and leveraging the application of instrumentation safety standards, mechanical integrity, design, and maintenance.
• Functioning as Project Engineer on instrumentation and control system capital projects and large instrumentation maintenance projects
• Using documentation systems and processes which maintain accurate instrumentation equipment and control system information and drawings
• Supporting criticality assessments of the plant's instrumentation equipment
• Designing Refinery Safety Instrumented Systems (SIS) design and maintenance
• Performing Safety Integrity Level (SIL) analysis and engineering upgrades of safety instrumented systems
• Assisting in developing strategic plans for implementing/upgrading instrumentation and control systems
• Serving as a technical resource to properly identify new and existing equipment specifications and proper operating parameters/ranges for instrumentation equipment
• Overseeing application and interpretation of National Electric Code and other applicable city, state, federal codes and standards (e.g. NPRA, NFPA, API, ISA)
• Performing audits of instrumentation installations and process control loops including failure analysis inspections
• Interacting with engineering and construction contractors, both on-site and off-site
• Review instrument changes for Management of Change approval. Ensure that changes are properly designed and documented.
• Assist with training and development of operators, technicians, and engineers in order to high-grade skill sets with respect to the instrument asset base.
• Support DCS operator interfaces with respect to information presentation and abnormal situation management.
• Facilitate increases in unit availability, increases in product quality, and reductions in refinery maintenance costs by developing and maintaining reliability systems for the plant’s instrumentation assets. Provide leadership for implementation of these reliability systems.

QUALIFICATIONS
Basic/Required: (Remember, anything listed in this section is a qualification the candidate MUST have in order to be considered.)
• Must possess a bachelor's degree in Electrical Engineering, Chemical Engineering, Mechanical Engineering or Engineering Physics
• 3+ years of experience in a refinery and/or chemical industry
• 3+ years of direct experience in process instrumentation design and/or maintenance.

Preferred: (Candidates do NOT have to have all of the items listed in this section to be considered.)
• Knowledge of the Ponca City Refinery instrumentation asset base.
• Proficient in use of SAP - PM & PS Modules
• Demonstrated knowledge and experience designing and supporting Safety Instrumented Systems (SIS), Safety Instrumented Functions (SIF), Layers of Protection Analysis (LOPA), and High Integrity Pressure Protection Systems (HIPPS).
• Proficient in computer applications such as Word, Excel, Outlook, and MS Projects
• Expert knowledge of field instrumentation and controls through design and field installation experience
• Demonstrated knowledge and experience on Programmable Logic Controllers (PLC) and Distributed Control Systems (DCS), preferably on Honeywell TDC3000 / Experion and FSC Safety Managers.
• Demonstrated knowledge on Process Analyzers, Chromatographs, and Gas Monitoring Systems.
• Demonstrated knowledge and use of SPI (InTools) database and specifications
• Strong analytical skills including statistical analysis
• Strong interpersonal and written communication skills
• Ability to lead execution of work and resolve issues in a team environment
• Accepts ownership, is accountable, and delivers on commitments
Ability to work in cross-functional teams

FOSTER DESIGN'S BENEFITS:
• Working for a 54-year old company
• Minimum 10 Paid Holidays with no waiting period
• Immediate 401K participation, 1 year 100% vesting schedule, matching employer contribution
• Free Financial Consultant
• Medical/Dental/Vision/Prescription card – BCBS
• MetLife – Long Term Disability Insurance
• Vacation Pay
• Per Diem Assignment Allowance, when applicable
• Per Diem Split, when applicable
• Paid Weekly (Direct Deposit)
 
Job Number: FD-81018-2OKPCR
Job Location: Ponca City, OK
Rate: $ BOE/HR
Per Diem: Possible Split
Overtime: Possible
Duration: 11 Months or longer
Start Date: 10/01/2018
Input Date: 11/14/2020
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Java Software Development Lead (Secret Clearance)

Description:
Description:
We are seeking a Lead Software Engineer to join a team of world-class engineers supporting PMA-231 and E-2D ALE Systems. The ideal candidate shall be knowledgeable about the software development life cycle (SDLC) and be able to adhere to coding standards, follow team established software development processes, and use established configuration management technologies.

The successful candidate will:
• Develop software on off-board laptop system for maintenance, support, and analysis in addition to adding new capabilities and correct faults and errors in processing of E-2D platform mission data
• Conduct multidisciplinary research and collaborates with equipment designers and/or hardware engineers in the planning, design, development, and utilization of electronic data processing systems
• Determine system user needs; analyze system capabilities to resolve problems on program intent, output requirements, input data acquisition, programming techniques and controls; prepare operating instructions; design and develop compilers and assemblers, utility programs, and operating systems while ensuring software standards are met
• Represent the organization as a technical contact on contracts and projects, and interact with leadership and suppliers
• Use innovative thinking to develop technology strategies and enhanced capabilities of software products
• Use expertise to develop technical solutions to problems and clearly present technical approaches and findings

MINIMUM QUALIFICATIONS:
• Participate in the full software development life cycle
• Knowledgeable with Object oriented programming
• Experience with Java, JSP, XML, and/or JavaEE development environments (Eclipse IDE)
• Experience with Windows and Windows-based applications, knowledge of Apache Tomcat Web Development
• Strong software lifecycle management experience
• Knowledgeable with configuration management tools such as Jira or Team Foundation Server (TFS)
• Strong verbal and written communication skills
• Ability to work independently within a team environment and multi-task in a fast-paced environment with strict attention to detail
• Ability to obtain and maintain security clearance

DESIRED QUALIFICATIONS:
• Experience with project management and/or Scrum/Agile tools (MS Project, Visio, etc.)
• Industry certifications are highly desired (CISSP, Security +, CSM, PMP, etc.)
 
Job Number: 18-04383
Job Location: Lexington Park, MD
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 Month+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Cody Grimes
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Knowledge Management Analyst - Secret Clearance

Description:
Job Description:
Knowledge Management Analyst to support development of Air Force (AF) Strategic Development Planning and Experimentation (SDPE) knowledge management and communication strategy. This candidate will identify and support the implementation of innovative approaches to collaborate using enterprise solutions to disseminate information, share best practices, and promote information sharing to SDPE partners and external stakeholders. This support will include identifying and assisting in the execution of strategies for closing knowledge gaps within existing systems and proposed streamlined approaches to advance knowledge; developing an organizational knowledge management strategy including a knowledge management infrastructure, systems, and a common tool set to capture, transfer, organize, and analyze information; assisting project staff with developing targeted knowledge management products, authoritative data services, visualization tools, and materials within a collaborative environment; cultivating knowledge management approaches, processes, analytical tools and systems supporting research; interrogating existing data sets and systems to identify and collate existing trends in the data; working closely with the SDPE Knowledge Management Team to provide up to date tools, information, and learning to inform SDPE experimentation campaigns and capability development planning; build and maintain professional networks with other relevant offices/centers on knowledge sharing lessons learned and best practices, Air Force Digital Engineering and Digital Thread.

Work location is at Wright-Patterson AFB in Dayton, OH and sit within AFRL/RS SDPE office.

Knowledge, Skills and Abilities:
Experience in knowledge/data management principles, leveraging technologies to share information, organizational learning and related fields.
Computer skills, including Microsoft Office Suite, experience with web platforms (e.g. SharePoint), and electronic communications.
Experience in data capture and analysis, and in evaluating and assessing organizational impact to inform governance development, service delivery and future architecture developments.
Proven ability to organize and share information effectively and understanding of how to visualize / present data for different users and audiences.
Facilitation and collaboration skills working with multi-level stakeholders, including technical and subject matter experts, government agencies, local partners, researchers and others.

Other required skills include:
Interviewing skills, to talk with individuals and groups about their needs and ask the right questions to surface essential requirements information
Listening skills, to understand what people say and to detect what they might be hesitant to say
Analytical skills, to critically evaluate the information gathered from multiple sources, reconcile conflicts, decompose high-level information into details, abstract up from low-level information to a more general understanding, distinguish presented user requests from the underlying true needs, and distinguish solution ideas from requirements
Facilitation skills, to lead requirements elicitation workshops
Observational skills, to validate data obtained via other techniques and expose new areas for elicitation
Writing skills, to communicate information effectively to customers, marketing, managers, and technical staff
Organizational skills, to work with the vast array of information gathered during elicitation and analysis and to cope with rapidly changing information
Interpersonal skills, to help negotiate priorities and to resolve conflicts among project stakeholders (such as customers, product management, and engineering)

PREFERRED SKILLS
Experience in cutting edge Industry or Academia in the fields of Information Technology (including Artificial Intelligence, Bi Data). Robotics. Bio/Med, Energy, or other critical emerging technology sector.
Experience at a National Laboratory or DoD Lab. Exposure to Defense requirements generation or operations.
Project management skills: schedule and manage Client and financial resources.

Is Driving Required?
No

Shift:
8am-5pm

Full Time / Part Time?
Full Time

US Security Clearance Required?
Yes

Special Requirements/ Certifications:
Candidates must be a U.S. Citizen
Contract-TO-Hire
 
Job Number: 18-12158
Job Location: Dayton, OH
Rate: OPEN
Per Diem: Split
Overtime: Possible
Duration: 3 Month Contract-TO-Hire
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Cody Grimes
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Planner 3-Electrical

Description:
Manufacturing Planner 3

Location: Renton, WA
Duration: 9 months

Description:
- Develop, implement and maintain various manufacturing plans, Bill of Materials, work instructions and illustrations to define and document as-built configuration.
- Assist with development and integration of suppliers, processes, materials, data and technology to meet manufacturing and delivery requirements.
- Assist in reviewing supplier data to ensure manufacturing related requirements are met.
- Identifies tooling requirements and initiates tooling orders based on manufacturing and engineering requirements.
- Assist in tooling dispositions.
- Investigate and resolve manufacturing related issues of limited scope.
- Assist with producibility assessments for part or product designs.
- Assist in providing input to design, manufacturing processes and manufacturing technologies to meet cost and schedules.
- Develop work statements and sequencing of events to support delivery commitments.
- Assist in the review, maintenance and monitoring of internal documents.
- Provide ship side support, research and shop assistance

Preferred Qualifications:
- Basic understanding of wiring and wire routing
- Experience with wire bundle fabrication concepts, wire installation, electrical equipment installation and installation of wiring provisions.

Experience In Teamcenter:
- Experience using Manufacturing Execution Systems (CMES)
- WIRS: Wires Information Release System
- CAPP II

Education / Experience:
AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.

Skill Code: 67B-Electrical/Electronics
 
Job Number: 18-04815
Job Location: Renton, WA
Per Diem: Split
Overtime: possible
Duration: 9 months
Start Date: 4/2/18
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 859 STEPHENSON HWY
City, State: TROY, MI 48083
Phone: 843/955-9221
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Planner III & IV - Electrical/Electronics - (WA)

Description:
SEVERAL OPENINGS IN THE EVERETT & RENTON, WA AREAS.

Manufacturing Planners with Electrical/Electronics experience.

- Develop, implement and maintain various manufacturing plans, Bill of Materials, work instructions and illustrations to define and document as-built configuration.
- Assist with development and integration of suppliers, processes, materials, data and technology to meet manufacturing and delivery requirements.
- Assist in reviewing supplier data to ensure manufacturing related requirements are met.
- Identifies tooling requirements and initiates tooling orders based on manufacturing and engineering requirements.
- Assist in tooling dispositions.
- Investigate and resolve manufacturing related issues of limited scope.
- Assist with producibility assessments for part or product designs.
- Assist in providing input to design, manufacturing processes and manufacturing technologies to meet cost and schedules.
- Develop work statements and sequencing of events to support delivery commitments.
- Assist in the review, maintenance and monitoring of internal documents.
- Provide ship side support, research and shop assistance

Preferred Qualifications:

- Basic understanding of wiring and wire routing
- - Experience with wire bundle fabrication concepts, wire installation, electrical equipment installation and installation of wiring provisions.
Experience in Teamcenter
- Experience using Manufacturing Execution Systems (CMES)
- WIRS: Wires Information Release System
- CAPP II

AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.

ACS Group (formerly 'Comforce')
 
Job Number: MPEEwa
Job Location: Renton & Everett, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
N/C Engineer

Description:
N/C Engineer conducts a thorough analysis of engineering drawings, tool design drawings, and/or electronic models, to determine the optimal machining methods, selection of machine tool, and material cut size. 2. Interact with planners, tool designers, engineering, and customers as required, to finalize plan. 3. Develop cutter motion logic per operation sequence, selecting proper spindle speeds and feed rates. 4. Perform a thorough check on all aspects of the program and verify cutter paths through the utilization of Vericut. 5. Develop operator set-up sheets for numerical control machines. 6. Develop flat pattern mylars and templates as required. 7. Produce 2-D Catia tool drawings as required. 8. May act as Team Leader as required, assigning work tasks, maintaining work load schedules, and setting priorities to ensure timely completion of department goals and corporate objectives. 4. Must be highly proficient with Catia modeling, drafting, and Catia NC Mill function. Programmer requirement is for a Highly skilled NC programmer for high speed machining centers. Programmer must also have experience related to the startup of a new high-speed machining center.




Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Four (4) years machining, planning, tool design, or related manufacturing experience to include 2 years of experience as numerical control engineer.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Packaging Design Engineer - Level 4

Description:
Packaging Design Engineer - Level 4

Location: Canoga Park, CA
Pay Rate: DOE ($50/hr - $60/hr)
Duration: 6 Month W2 Contract
Shift: First, OT possible
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**

Duties:
** This is a Hardware packaging role. NOT a Software or Electrical packaging role. Candidates should have Mechanical Packaging experience **
-Selected candidate will work with Lead Packaging Engineer to provide packaging requirements, specifications, and concepts for ongoing and future programs.
-The selected candidate will evaluate technical feasibility between product lines, and type of packaging required, with an emphasis on innovation, functionality, and sustainability.
-And where required, provide estimates of costs and potential suppliers for functional packaging, and interact closely with both product teams, and packaging suppliers for a best fit packaging solution.

PRIMARY RESPONSIBILITIES:
(40%) Designs and develops packaging, handling, and transportation concepts for various programs with an emphasis on the materials and structural characteristics of the finished packaging product, with a keen ability to handle multiple projects and work under pressure to meet deadlines and project objectives
(30%) Ensures functional compatibility with packaging equipment and overall efficient manufacturing operations.
(20%) Provides packaging technical input and assistance internally and externally to product teams, Quality Assurance, Structures, and can network effectively with vendors, enterprise communities to transfer knowledge and apply external ideas to packaging capabilities.
(10%) Maintains an up to date knowledge of all relevant Packaging Safety and Compliance requirements, as well as industry trends and developments for the packaging of military items.

Skills:
-CREO required
-WindChill strongly preferred
-5+ years packaging experience is a plus
-Familiar with ASTM standards for packaging, and shipping boxes is a plus.
-Familiar with MIL-HDBK-304, MIL-STD-810, and MIL-STD-2073 is a plus.
-Strong communication skills.
-Excels in a collaborative team environment and is able to lead cross-functional teams, also work in cross-functional teams.
-Understanding of ISTA guidelines with an emphasis in reducing product damage and improving environmental performance.
-Networking & Information gathering skills
Education:
-B.S. Degree in Packaging Science, Mechanical Engineering or equivalent combination of education/experience

Skills/Required
AEROSPACE DESIGN ELECTRONIC PACKAGING ASTM STANDARDS MIL-STDS CREO
 
Job Number: 8869
Job Location: Canoga Park, CA
Rate: 50-60
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer

Description:
Project Engineer
Windsor Locks, CT
12 month contract


Our client is looking for a Project Engineer with a background in Aerospace or Mechanical, with 5 years minimum of experience in Space, Aerospace or Defense.


Must have experience leading IPD Teams.. Must have experience with SAP and understanding or processing hardware in concert with SAP. The Project Engineer will work per the direction of the Program Engineering Manager or designees to assist in team execution to plans. Skills and working knowledge of Project Management Body of Knowledge required. Facilitate and lead IPD Team with members from all functions.

• Planning, execution, coordination and communication of team activities and commitments
• Coordinate and status all IPD Team activities including requirements generation, development, design (including program planned reviews), procurement, fabrication and test.
• Work with IPD to create hardware development plans, coordinate hardware build effort in both the engineering labs and production labs.
• Ensure targeted goals (schedule and cost) is communicated to the team members
• Identify, assess and manage the team’s risks
• Hold/chair/lead weekly team meetings (or at intervals determined by the Program Engineering Manager (PEM) or Cost Account Manager (CAM)) to ensure holistic team effort within authorized scope. Ensure actions are document and driven to closure commitments.
• Perform Estimates to Complete (ETC) updating them progressively to ensure the team meets budgets and avoids scope growth and overruns.
• Meet design and design-to-cost requirements.
• Assist in administering Standard Work for the IPD Team including input of evidence of closure and status for all functions. Individuals are required to be energetic and lead team.

The candidates must be comfortable using MS Project scheduling tools and comfortable with discussing performance to budget and creating cost and schedule recovery options and plans.
Assist in creating program directives that define Earned Value Plans.
Status plans and recommend corrective action to the Program Engineering Manager and/or Program Manager Work with operations to fabricate, assemble and test development and qualification and flight hardware.
Coordinate, track and support development and flight hardware build and test.
Initiate in scope engineering changes working with all functions to implement approved changes. This will include marking drawings, copying prints, creating PDF’s to support our client's electronic EC processes.
 
Job Number: 53404
Job Location: Windsor Locks, CT
Rate: 60.00
Per Diem: Possible
Overtime: Possible
Duration: 12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Publications Analyst

Description:
Looking for a talented and motivated O Level Publications Avionics Analyst to support the development and sustainment of the CMHP CH-148 Publications.

The candidate will report directly to the IPT Tech Pubs Lead.
The technical manual series for this program is prepared in accordance with S1000D authoring specification and delivered in an Interactive Electronic Technical Manual (IETM) product. This IETM contains principles of Operation, Maintenance, Illustrated parts Breakdown, and Testing/Troubleshooting procedures inclusive of system diagnostics.
Responsibilities:
Support the CMHP IPT to accomplish all contracted efforts within program cost, technical and schedule objectives.
Research technical information, interpret technical data, and ensure error free incorporation of data consistent with related subject matter.
Coordinate with key suppliers on the Integrated Mission System (IMS) technical manual coverage.Knowledge of authoring and graphics specifications.d. S1000D authoring specification technical experience a must.
Authoring tasks in an Extensive Markup Language ( xml) authoring environment and develop Electronic Rapid Action (ERAC) changes as required.
Perform acceptance reviews of assigned technical manuals as required by the Statement of Work, including supplier acceptance inspections and evaluation of source data incorporation.
Perform final reviews of technical manuals to support delivery requirements.
Conduct hands-on validations, as required.
Coordinate Maintenance Planning task analysis technical data into the content management authoring system.
Act as a liaison between In-Service Support (ISS), and Acquisition Engineers, Suppliers, CMHP cross IPT members, IETM/SAMS IT, and DND customer.
Investigate/reply to customer comments and also coordinate supplier incorporation of comments as applicable.
Coordinate engineering reviews to ensure turnaround times consistent with product delivery requirements.
Support In-Process Reviews as required by the Statement of Work (SOW) or as requested by the CMHP IPT Lead
Project Management / Quality Tracking:
Ensure that a schedule is maintained and final delivery is made in accordance with the CMHP Integrated Master Schedule (IMS).
Ensure that project status is maintained and reported.
Experience using Earned Value Management System (EVMS) as it relates to deliverable activities within the IMS, would bea plus.
'Must possess a thorough knowledge of the terms and conditions of work conducted at the outsource supplier sites.
Perform quality evaluations on supplier projects to track and reduce defect rates.
Maintain and retain quality forms in accordance with Supportability & Training (S&T) standard work.
Customer and upper management status presentations may be required.
QUALIFICATIONS:
An AS in a technical concentration, or equivalent technical experience is required.
A BS in a technical/engineering concentration desired.
An A&P license is highly desired.
A minimum of 7 to 10 years of experience authoring technical publication projects using military specification requirements, is required.
Military rotary wing aircraft maintenance certification is highly desired.
Experience with S1000D authoring specification is a must.
Seeking a highly motivated self-starter, who isable to think and operate independently.
The candidate must have the ability to manage multiple activities of varied size and scope.
Seeking someone with strong customer focus and a high degree of attention to detail.
Strong communications skills (both written and verbal), are essential, as well as strong organizational skills.
The candidate should be results-oriented and flexible to work within a dynamic team environment.
Familiarity with Six Sigma, or similar, is desired.
This contract position will be 12 months in duration.
 
Job Number: 41981
Job Location: Windsor Locks, CT
Rate: $42.00 - $50.00
Per Diem: yes
Duration: 12 months
Start Date: asap
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Jane
Address: 42 MAIN ST
City, State: WINDSOR LOCKS, CT 06096
Phone: 860/254-6335
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Assurance Engineer (Aerospace)

Description:
Quality Assurance Engineer (Aerospace)

Location: Windsor Locks, CT
Pay Rate: $36/hr
Duration: 9 Month W2 Contract
Shift: First, 8:00am – 5:00pm
Travel: Local, Regional
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**
**NO RELOCATION COMPENSATION; NO PER DIEM SPLIT**

Description:
Work with the assigned Quality Engineering Staff to:
• Review Supplier Pass Through First Article Inspection folders
• Assist in activities associated with supplier quality, warranty process, part purges and MRB activities
• Assist on Internal Quality Audits
• Perform RRCA for any quality issues within repair station via work flow.
• Support the corrective action board (CAB) and Relentless Root Cause & Corrective Action (RRCA) board.
• Assist processing warranty dispositions through SAP
• Update and maintenance of information technology quality tools (workflows, SharePoint sites, customer portal, SAP)
• Perform repair station manuals and procedures per request
• Coordinate with quality engineering and engineering the cost support quality efforts.

This position will also support the following:
• Ensure repair station is in compliance with all associated quality procedures and policies including quality requirements driven by the Customer & Regulatory Agencies (FAA/EASA/CAAC/CASE) and future regulatory agencies
• Support the quality clinic to ensure nonconforming material is flowing efficiently.
• Ensure quality metrics are updated and submitted to central quality, government agency (DCMA), and internal business unit.

Requirements:
-Bachelor's degree or higher required
-Must have 4-7+ years of experience within Quality is required.
-Candidate with Electronics or Electrical background is required.
-Experience with FAA Part 145 Repair station regulatory requirements and Code of Federal Regulations is highly desired.
-Experience in Microsoft applications: Excel, PowerPoint, Word, Access is required.
-Strong verbal and written communication skills is required.
-Past experience in an operations or manufacturing company is preferred.
-Experience with SAP is preferred
-Due to programs this position will be supporting, it requires US Citizenship.
- Flexibility and willingness to take on additional tasks outside of the core quality role is required
 
Job Number: 8804
Job Location: Windsor Locks, CT
Rate: 36
Per Diem: No
Overtime: Possible
Duration: 9 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
SR. POWER ELECTRONICS AND CONTROLS ENGINEER

Description:
DESCRIPTION OF DUTIES AND RESPONSIBILITIES:

The Sr. Power Electronics and Controls Engineer will lead the development of a variety of power conversion devices and motor control systems from early stages of design through final testing and manufacturing support. Perform analysis and simulation of control loops and circuit elements to ensure product performance and reliability. Provide leadership in development of design processes for power electronics that result in predictable high value design outcomes. Work effectively with manufacturing engineering, planning, and procurement to ensure that new designs flow predictably into production, meeting cost, DFX, and other required goals.

QUALIFICATIONS AND NECESSARY BACKGROUND:

• Proven performance in design of high power system products

• Design for EMC including circuit board layout, control, and filter design.

• Control loop design and optimization.

• Ability to work effectively in a multi-discipline team (engineering, manufacturing, planning, purchasing, field service, marketing, etc.)

• Must be able to complete complex tasks with minimum supervision

• Ability to understand complex systems from engineering documentation.

• Strong problem solving and root cause analysis skills.

• Good knowledge of automotive standards and test methods preferred.

• Experience with planning, executing and managing outsourced developments (partial or turn-key)

• Experience in design requirements for regulatory requirements (UL, CE, NEC, etc.)

• Excellent organizational and communication skills including ability to communicate and foster communication between collaborating groups.

• Experience developing-for, transitioning and maintaining test platforms for use at contract manufacturers, particularly in Asia

• Off line and DC/DC power electronics and Magnetics design for high frequency switching power supplies.

• IGBT and MOSFET operation and drive techniques, design for Power Factor and power factor correction

• Thermal design

• BSEE and minimum 7 years of applicable experience in three phase and DC/DC high frequency power supplies.

• MSEE preferred.
 
Job Number: 364436
Job Location: Monrovia, CA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: 6 Months +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
STRAIN GAGE APPLICATION TECH / Instrumentation Specialist Lead

Description:
JSG is seeking an Instrumentation Specialist Lead for a 15+ months contract opportunity in West Palm Beach, FL!

Description: Strain Gage application Technician:

The successful candidate shall meet the following requirements:- High School diploma, or equivalent experience/combined education, with additional specialized technical training equivalent to a technical Associate degree and/or demonstrated ability to perform assigned technical/para-engineering tasks and 15 Years or more of experience.- Minimum of 10 years’ experience in the field of strain gage application to support test instrumentation -Experience and ability to accomplish required surface preparation, strain gage measurement, layout, alignment and bonding. Experience with measurement systems, instrumentation wiring, documentation, and Wheatstone Bridge wiring of strain gages to measure Torque, Axial Load, Bending and Shear strain.
Experience troubleshooting and repairing strain gage measurements. - Familiarity with electronic tools such as multi-meters, oscilloscopes, logic analyzers, etc.- Solder/de-solder experience required.
Experience reading wiring diagrams and interpreting schematics and engineering drawing.
Manages building and maintenance of instrumentation systems for Flight Test programs to provide measurement data required by the Engineering Department. Apply instructions prepared by aircraft technicians in the form of travelers, Assist in the preparation, installation, check-out and operation of instrumentation systems, follow planned maintenance / calibration, and standard operating procedures for all instrumentation and control equipment in order to maintain accuracy of data and ensure its validity, and operate DAS (data acquisition system) and other recording equipment.
 
Job Number: 364851
Job Location: West Palm Beach, FL
Per Diem: Possible
Overtime: Possible
Duration: 15+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Assembly Mechanic

Description:
~ Looking for someone that is skilled in engines, preferably in the Automotive, Aircraft or Military Industry; Mechanical assembly may be considered, but engine experience is ideal.
~ Individual will be tearing down aircraft engines and preparing for rebuilds (strictly mechanical, not electrical).
~ MUST have familiarity with equipment (hand tools, pneumatic, drill presses, rivet guns, etc).
~ MUST be computer literate; some data entry using Excel to document evaluation results
~ No harness experience necessary

Summary

To perform moderately complex assembly of electronic and mechanical parts and assemblies in accordance with engineering drawings and specifications.

Responsibilities:

> Sets up and fabricates moderately complex electronic and mechanical assemblies utilizing various forms of written and oral instructions, automatic and semi-automatic machines and hand tools.
> Specific duties vary by workload and cover a range of assembly techniques including harness and cable fabrication, electro-mechanical assembly.
> Performs administrative tasks associated with assembly operations which include Manufacturing Order documentation, production problem transmittal generation, and shelf life maintenance.
> Resolves manufacturing problems.
> Maintains good housekeeping, safety standards, and calibration requirements.
> May set up production equipment.
> Practices Total Quality principles and concepts.

Qualifications:

> 5+ years of related experience with a high school diploma, or equivalent education or experience to demonstrate the ability to successfully perform the job duties.
> Specialized and extensive experience in mechanical assembly techniques.
> Military and commercial quality specifications.
> Manufacturing policies and procedures.
> Ability to read and interpret complex instructions, procedures, and engineering drawings/specifications.
> Ability to use measuring instruments, set-up/operate fabrication equipment in work area(s) & plan and organize work.
> Ability to concentrate while discriminating colors & small details, good hand/eye coordination & Finger/hand dexterity.
> Knowledge of shop math and ability to apply math skills.
> Electrostatic discharge procedures and methods.
> Ability to work well with others employing team principles.
> Must be able to work in small confined areas, be flexible in work hours and be able to lift up to 20 to 30 pounds
> All requirements are subject to possible modification to reasonably accommodate individuals with disabilities.
> Applicants selected will be subject to a government security investigation and must meet eligibility requirements, including US Citizenship, for access to classified information.


Mark A Ludwig
Vice President
Global American Staffing
Email: mludwig@globalams.us
Office: (508) 230 – 5030 x123
 
Job Number: 017_2018
Job Location: Cockeysville, MD
Rate: DOE
Per Diem: Split Possible
Overtime: Yes / Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark A Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Electrical Engineer (Secret Clearance)

Description:
ROLE AND RESPONSIBILITIES
Provide electrical engineering support to Research, Development, Test and Evaluation (RDT&E) programs for military aircraft/weapon systems, including planning, directing, and/or participating in aircraft and laboratory testing. Prepares procurement specification inputs, interface drawings, installation design packages, and calibration procedures to accommodate unique test requirements. Oversees systems modifications, installation, integration, and checkout functions. Performs test planning, data collection, and test data analysis. Functions entail providing support for electrical power quality testing and evaluation, including voltage and frequency transients/modulation, voltage distortion, and power interruption on various aircraft, shipboard, ground vehicle, and vendor prototype components and equipment. Functions involve applying engineering principles to modify and upgrade laboratory electrical and instrumentation systems in support of power and propulsion RDT&E programs. Projects will interface test articles with programmable power supplies and data acquisition equipment to conduct power quality tests, followed by analysis of test article responses for compliance with MIL-SPECS/MIL-STDs. In particular, candidate must have experience with Interface Standards for input power to military and aircraft contained in MIL-STD-704, military vehicles contained in MIL-STD-1275, and FAA RTCA DO-160. That experience must also include interpreting guidance for test procedures specified in MIL-HDBK-704 parts 1 through 8. Position also requires knowledge of test planning, data collection, data analysis, test report writing, and presentation of results. Further requirements include specialized knowledge and experience in the design, installation, operation, calibration, maintenance and repair of power quality test facilities, associated equipment, and their control systems. Duties may include performing other tasks for propulsion and power as directed. Candidate must be able to obtain/retain a Secret level DoD security clearance, and may be required to perform other tasks on an as-needed basis. Position is located in Patuxent River, MD.



REQUIREMENTS
Education:
Bachelor's Degree in Electrical Engineering (EE) from ABET accredited university required with a minimum of 8 years' experience supporting RDT&E to include 6 years performing functional aspects as described in the roles and responsibilities. Master's Degree in Electrical or other Engineering related discipline a plus.

Experience:
Experience working with research, development and testing with respect to requirements and characteristics of propulsion and power equipment performance.
Experience must include conducting tests to generate extreme power conditions meeting specification for standardized test regimes then conducting performance tests of electronic and electrically-powered equipment after exposure to test conditions.
Applying test conditions to include extremes with respect to voltage, frequency, modulation, distortion, and other characteristics.
Performing tests post exposure to extreme conditions to verify operation remains within specification and the equipment continues to function reliably in-service.
Experience with MIL-STD-704, MIL-STD-1275, and FAA RTCA DO-160 required.
Must have demonstrated experience directing, monitoring, and/or participating in the installation, configuration, calibration, and operation of engine test systems, environmental chambers, associated instrumentation, and/or data acquisition systems used for testing propulsion and electrical power systems.
The candidate should be capable of managing programs including writing proposals, developing program plans, and providing briefing material.

Knowledge, Skills and Abilities:
The candidate should be capable of managing programs including writing proposals, developing program plans, and providing briefing material.
Functions involve applying engineering principles to modify and upgrade laboratory electrical and instrumentation systems in support of power and propulsion RDT&E programs.
Applying analysis and test methods demonstrating equipment compliance to power characteristics.
Ability to develop test plans, design test equipment, establish protocols and procedures specific to individual test articles following guidance provide in DoD, FAA, and other documents.
Knowledge in applying programmable power sources with appropriate software and firmware needed to generate waveforms specified by test standards.
Knowledge of MIL-STD-704 and the eight parts of MIL-HDBK-704 for aircraft systems. Knowledge of MIL-STD-1275 for Military Vehicles.

Equipment and Machines:
Ability to operate office equipment such as personal computer, printer, copy machine, telephone, fax machine and other equipment including desk supplies and other work related tools as required.
Ability to operate power test systems to include programmable AC/DC power sources, power analyzer, test management and control systems, laboratory measuring, environmental chambers and other equipment required to provide test conditions, manage test sequences, and perform measurements of test parameters.
Ability to perform or facilitate calibration and repair of laboratory testing and measurement systems.

PREFERRED SKILLS
Prior DoD acquisition work experience is preferred. Familiarity with NAVAIR Propulsion and Power Laboratories and related competencies also preferred.

ADDITIONAL NOTES
Applicant selected will be subject to a government security investigation and must meet eligibility requirements for access to classified information.
 
Job Number: 18-07393
Job Location: Patuxent River, MD
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 Month+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Cody Grimes
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Electronics Assembler

Description:
Notes from Hiring Manager: Hours are 7:00 AM to 3:30 PM

* Looking to hire four (4) Senior Electronics Assembler's that specifically have 4 – 5 years of Cable & Harness Experience
* They should be familiar with crimpers / military connectors, solder sleeves, and daisy chains
* RF Cable Experience and Commercial experience/HVAC/PC Boards/Etc. are not relevant

Summary:

Looking for a Senior Electronics Assemblers to perform complex assembly of harnesses, cables and electronic parts and assemblies in accordance with engineering drawings and specifications.

Responsibilities:

> Sets up and fabricates complex electronic assemblies utilizing various forms of written and oral instructions, automatic and semi-automatic machines and hand tools.
> Specific duties vary by workload and cover a range of assembly techniques including very complex harness and cable fabrication, electro-mechanical assembly.
> Performs administrative tasks associated with assembly operations which include Manufacturing Order documentation, production problem transmittal generation, and shelf life maintenance.
> Resolves complex manufacturing problems.
> Maintains good housekeeping, safety standards, and calibration requirements.
> Sets up production equipment.
> Practices Total Quality principles and concepts.

Qualifications:

> 5+ years extensive experience specialized in building harnesses, cables & electronic assembly techniques.
> Military and commercial quality specifications.
> Planning, leadership, and organization skills.
> Ability to read and interpret complex instructions, procedures, and engineering drawings/specifications.
> Ability to apply cost/quality control methods & set up/operate all fabrication equipment in area assigned.
> Ability to concentrate while discriminating colors & small details.
> Excellent math skills, hand / eye coordination and finger / hand dexterity.
> Electrostatic discharge procedures and methods.
> Ability to work independently, as well as working well with others.
> High School diploma, or equivalent education (GED) with the ability to successfully perform the job duties.
> MUST BE US CITIZEN
 
Job Number: 004_2018
Job Location: Cockeysville, MD
Rate: DOE
Per Diem: Split Possible
Overtime: Yes
Duration: 12 +/- Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark A Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Principal Systems Engineer – Secret Clearance Required

Description:
Senior Principal Systems Engineer – Secret Clearance Required

Location: Woburn, Massachusetts

Terms: Long Term Contract Employment

Description:

Electronic Protection (EP) Subject Matter Expert (SME) related to radar design.
Radar Architecture and processing flow experience.
Analysis and verification of new design concepts, function as expected in a simulation and/or tactical radar setting.
Experienced with MATLAB (able to design, code, build tools and perform analysis routines).
Algorithm Development experience.
Math/Statistics/Engineering Degree.
10+ years of Systems Engineering experience within algorithm design, development, or analysis.
Active Secret Clearance required
Tentative interviews to start the week of April 30th, 2018.
 
Job Number: 385629
Job Location: Woburn, MA
Rate: 110.00
Per Diem: No
Overtime: Possible
Duration: 12 Mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: CDI CORPORATION
Attention: Kris Douglas
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer (contract)

Description:
Design, develops, documents, tests and debugs control and diagnostic systems that contain logical and mathematical solutions.

Conduct multidisciplinary research and collaborates with Equipment Designers in the planning, design, development, and utilization of electronic data processing systems for product and commercial software.

Determine end user needs by analyzing system capabilities to resolve problems on program intent, output requirements and input data acquisition.

Design and implement build procedures that are used to support hardware and software product development and use.

Educational Requirements:

BS in Software Engineering or Software-related discipline

Required:

A minimum of 10 experience as a Software Engineer in an Aerospace company.
 
Job Number: 42024
Job Location: Windsor Locks, CT
Rate: Good $$$$
Per Diem: yes
Overtime: yes
Duration: 8 months
Start Date: asap
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Jane Rochford
Address: 42 MAIN ST
City, State: WINDSOR LOCKS, CT 06096
Phone: 860/254-6335
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer with active secret / C++ 1553 CA

Description:
161743
Requirement# AERO-REQ-0764
Work Location Palmdale, CA
Work Week 9/80
Priority High
Needed Date 02/28/2018
End Date 06/01/2019
Number of Resources 1
Security Clearance Secret


Title Software Engineer
Description
The Skunk Works (Lockheed Martin Advanced Development Programs) is seeking world class talent in Mission Systems and Software to be a part of a team that will carry on our 70 year tradition of making history in advanced aircraft development.The selected applicant will utilize advanced technical concepts in support of software products within Advanced Development Programs (ADP). The applicant will be responsible for the design, development, integration, and testing of airborne avionics embedded software, ground-based application software, and/or simulation software. Applicant must be able to support the full software development life cycle – including requirements and configuration management - and work in a mature software process environment. The position requires interfacing with various disciplines, including Systems Engineering and Integration & Test. Applicant must be capable of independently designing and creating software solutions based on limited information on rapidly evolving projects. This role requires a highly motivated, organized engineer that is familiar with all aspects of mission systems development. Applicant must have excellent oral and written communication skills.The applicant may gain experience in avionics subsystems such as navigation guidance, data links, communication links, stores management, weapons integration, mission computers, electronic warfare, serial interfaces, analog and digital I/O, and networking.

Skill/Experience/Education
Mandatory:

Embedded software development using C or C++ Development of real-time systems or use of real-time operating systems (RTOS), such as Wind River VxWorks or Green Hills Integrity

Desired:

Experience with the following: - Developing software for air vehicle or mission systems - Rhapsody or other model-based software development - Integrating hardware and software - Data Acquisition and telemetry systems - MIL-STD-1553 - MIL-STD-1760 - Configuration management



Interview Required Yes

Shift 1st Shift

OT AllowedYes (OT Limitation: No)
Travel No
Non-Exempt

Rates
0-4 Yrs Pay Rate: 65.00 USD
5-8 Yrs Pay Rate: 70.00 USD
9+ Yrs Pay Rate: 75.00 USD
 
Job Number: JE-0764
Job Location: Palmdale, CA
Rate: 65-75/hr DOE
Per Diem: no
Duration: 4 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Electrical Engineer

Description:
Sr. Electrical Engineer – Hardware Circuit Board Design
Expected to last 24+ months
Cedar Rapids, IA

Description:
This position focuses on circuit board designs for digital hardware in communication products. We are seeking a highly motivated Senior Electrical Engineer to join the digital hardware design group within Government Systems Communication Engineering. Electrical Engineers perform activities that span all phases of the hardware development lifecycle, including requirements capture, design, integration, verification, factory transition, and customer interface.

This engineer will develop digital hardware circuit boards used in high performance communication products, such as sophisticated software-defined radios and data links. Primary assignments will include use and application of electrical engineering principles and techniques to design, develop, document, verify, support, and troubleshoot digital hardware of moderate to high complexity, such as multiple hardware components or mixed electrical technologies, for airborne and ground communication products. This position encompasses new design and product sustaining support roles. The selected candidate will work closely with Systems, Software, Mechanical, Environmental Effects, Manufacturing/Operations and Design-to-Cost staff to assure defined requirements are consistently met in all phases of a product's lifecycle.

Candidates must have the following skills:
-Candidate selected will be subject to a government security investigation and must meet eligibility requirements.
-Bachelor's degree in a Science, Technology, Engineering or Math (STEM) discipline
-Circuit board design experience including experience with schematic capture tools
-Domain knowledge of digital electronics and experience with digital electronics design principles and techniques (e.g. Microprocessor/microcontroller, DSP, FPGA, ASIC, ADC, DAC) including experience working with lab equipment (Oscilloscopes, Analyzers, etc.).
-Experience in aspects of the digital hardware life cycle, including requirements capture, design and development, debug and test, and requirements validation
-Ability to effectively communicate in a professional manner and produce detailed, clear and concise technical documentation.

Desired Experience/Skills:
-Experience with Signal integrity and timing analysis tools such as Hyperlynx and/or Timing Designer
-Knowledge of FPGA, ARM, and DDR memory is highly desired.
-Knowledge in the area of high speed design practices including signal integrity is also desired.
-Working knowledge of digital circuit design parameters (e.g., throughput, rise time, clock frequencies, propagation delay). Includes knowledge of computer hardware components (e.g., processors, memory, interfaces), and characteristics (e.g., throughput, processing architecture, timing, capacity).
 
Job Number: 53774
Job Location: Cedar Rapids, IA
Rate: 63.00
Per Diem: Possible
Overtime: Possible
Duration: 24+ months
Start Date: 05/08/18
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Flight Control Engineer

Description:
Responsibilities:
Develop Flight Control Laws and control algorithms to meet vehicle performance, flying qualities, and stability margins on ground and in flight.
Support definition of Flight Control System specifications and requirements and Flight Control Law requirements for handling qualities, sensors, actuators, and controllers.
Design, develop, and test autopilot and associated logic functions.
Develop modeling and simulation of dynamic systems
Develop six-degree-of-freedom (6DoF) digital simulation models and computer code.
Conduct engineering analysis, studies, and performance assessments.
Integrate models into software and hardware-in-the-loop simulation environments.
Verify and validate Flight Control Systems through testing in desktop simulation environment, systems integration labs, aircraft flight test, and aircraft/system qualification and certification activities.
Perform hardware / software integration and testing on flight simulator devices, including pilot in the loop testing.
Support analysis of system architecture, redundancy management, electronic hardware design and integration, and actuator design and integration.
Support development of Operational Flight Program software.
Work closely with engineers of varying disciplines and aircraft Subject Matter Experts to meet flight simulator regulatory and customer training requirements
Participate in engineering design reviews.
Keep current on future technologies and products
Analyze air vehicle flight test data and support flight test activities

Requirements
8 years’ or more experience in flight control law development for aerospace vehicles.
· Knowledge of aircraft and aerospace systems with emphasis on flight dynamics, propulsion and ground reaction forces.
· Knowledge of reversible and irreversible flight control systems.
· Knowledge of MIL-HDBK-1797, MIL-F-8785C; MIL-F-9490D; DO-178B
· Simulation Experience
· Experience with planning and conducting flight tests, and post test data evaluation.
Excellent verbal and written communication skills
Excellent Organizational Skills and problem-solving skills
Strong team player
Excellent computer skills, including word, excel and powerpoint
Proficiency with Simulink, C/C++, Linux / Unix, MATLAB, Fortran
Applicants must be U.S. persons as defined by the ITAR (22 CFR §120.15)
Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA is highly desired

Education/Certifications Required:
BS or MS degree from an accredited college in Mechanical Engineering or Aerospace Engineering (or related field).


Must have simulation and Flight Control Law Development Experience
Knowledge of aircraft and aerospace systems with emphasis on flight dynamics
Knowledge of reversible and irreversible flight control systems.
Proficiency with Simulink, C/C++, Linux / Unix, MATLAB, Fortran

The Structures Company is an AA/EOE.
 
Job Number: 160
Job Location: CA
Duration: 6-9 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Mechanical Engineer

Description:
Sr. Mechanical Engineer
Wilsonville, OR
6 month contract



The Manufacturing Engineering team is responsible for all mechanical engineering tasks related to the test and process flow of aerospace head-up display and guidance products. This position requires knowledge of engineering theory and principles to determine packaging solutions for electronic, electromechanical and optical test equipment. Our engineers are responsible for ensuring products are safe and comply with our client's standards.

Job Responsibilities
•Perform under a process oriented development system and be able to provide process improvement suggestions once knowledgeable
•Perform autonomously under the direction of team leaders, program management and engineering management
•Work closely with other engineering disciplines to ensure the mechanical design is appropriate for the project/product design approach
•Contribute to schedule creation and ensure schedule commitments are met
•Create and present program and/or task status presentations to team members and engineering management
•Create and present clear and concise technical descriptions to engineering leadership and customers
•Mentor junior engineers and provide guidance to design manufacturing team members
•Provide input to design and document reviews
•Spearhead investigations for open ended complex problems
•Develop detailed hardware requirements based on product theory, system level requirements and customer requirements
•Complete designs that meet documented hardware requirements
•Create test procedures to support the testing of products to industry and government standards
•Review hardware defects and identify systemic root causes and process improvements

Basic Qualifications
•Bachelor’s degree in a Science, Technology, Engineering or Math (STEM) discipline, preferably Mechanical Engineering
•Experience in mechanical engineering design and development
•Knowledge of engineering materials and processes
•Experience with structural and thermal management design
•Proficient in a 3D CAD solid modeling software package (SolidWorks preferred)
•Proficient in tolerance analysis and application of Geometric Dimensioning and Tolerancing principles
•Strong technical, analytical and problem solving skills
•Ability to effectively communicate throughout all levels of the organization

Additional skills or experience a plus:
•Packaging of electronic and/or precision optical systems
•Design of manufacturing, calibration and test support equipment
•Aluminum fabrication techniques including: machining & investment casting
•Experience in avionics or aerospace industry
 
Job Number: 53738
Job Location: Wilsonville, ORE
Rate: 45.00
Per Diem: Possible
Overtime: Possible
Duration: 6 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Staff Systems Engineer

Description:
*Ability to deal with complex problems in an international environment of cultural diversity
*Life cycle Product development from concept through verification and delivery to the customer including integration onto the specific platform
*Architecture complex MWS systems, guide the development efforts, review and approve designs concepts, models, and drawings on multiple programs
*Ability to support multiple programs simultaneously
*Technical briefings to management and customers
*Excellent planning, management and communication skills
*Development of technical & product roadmaps and competitive assessments
*Analysis of Customer Documentation to create System Level Concepts of Operations (CONOPS), Specifications, Architectural Design and Interface Control Drawings (ICDs)
*Perform the sophisticated analysis, design and testing of complex systems
*Technical interface between ESA’s external customers and sub-contractors
*Provide technical support to customer and user lab and on-aircraft testing
*Develop and analyze highly complex algorithms
*Support proposal development activities, including proposal text development, cost estimating and presentation activities
*Proficiency in the use of Requirements Management and Model Based Systems Engineering tools
*Work independently and with internal/external organizations
*Willingness to travel domestically and internationally
*Mentor and develop junior engineers in this domain

Qualifications and Experience:
*Bachelor's Degree in Aeronautical, Electrical, Electronic, Mechanical, Software or Systems Engineering, or Computer Science
*10+ years functional experience may substitute
*Design and development of Missile Warning Systems, including but not limited to:
-Detailed knowledge of integration of Infra-Red Missile Warning Systems
-Detailed knowledge of single color and dual color Infra-Red Missile Warning System technologies
-EW system hardware design knowledge as it relates to the detection and countering of Radar and missile system engagements (IR & UV)
-Electro-Optical Distributed Aperture Systems
-Digital signal processing concepts including FFT, and DRFM
-Detailed knowledge of algorithm performance associated with MWS and system simulation and modeling
*Knowledge of F-16, F-35 and UH-60 military platforms preferred
 
Job Number: 127393
Job Location: Fort Worth, TX
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Design Engineer

Description:
About Enea
Enea is a global supplier of network software platforms and world class services, with a vision of helping customers develop amazing functions in a connected society. We are committed to working together with customers and leading hardware vendors as a key contributor in the open source community, developing and hardening optimal software solutions. Every day, more than three billion people around the globe rely on our technologies in a wide range of applications in multiple verticals – from Telecom and Automotive, to Medical and Avionics. We have offices in Europe, North America and Asia, and are listed on Nasdaq Stockholm. Discover more at www.enea.com and start a conversation at info@enea.com.


EBAS - Electronic Bleed Air System

Control Systems Testing – HW/SW Integration Lab-based Testing of the 777X EBAS, includes system-level testing, Built-In Test focus (fault detection and analysis of impact of failures) analysis of requirements and how they may relate to already-defined failure modes, updating requirements based on test results (Customers Change Requests and DOORS updates).


Senior Systems Design Engineer - Complex control system design and development - Complex diagnostic system design - Extensive experience in requirement management - DOORS experience - Thermal mechanical system knowledge - Aerospace applications experience - Knowledge of aerospace development standards - 10+ years of Systems Engineering experience for aerospace applications (Senior Engineer level experience & knowledge)

Location is Mississauga, ONT (suburb of Toronto).
 
Job Number: WW032818WHC
Job Location: Canada
Rate: DOE
Per Diem: YES
Overtime: YES
Duration: 6 months
Start Date: April 15
Input Date: 11/14/2020
Firm Name: ENEA SOFTWARE AND SERVICES
Attention: Walter Walonoski
Address: 2555 E CAMELBACK RD STE 280
City, State: PHOENIX, AZ 85016
Phone: 480/753-9200
Fax Phone: 480/753-6400
Website: www.enea.com/services/expertise

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineering Manager

Description:
Systems Engineering Manager

Thie successful candidate will be joining the development team.



Job Responsibilities

  • Lead the Systems Engineering function and team as it enters production phase;

  • Partner with external developers to develop and verify systems through integration and test;

  • Perform functional hazard analysis and simulation, gather data, perform DFMEAs to down-select among alternative architectures based on cost, reliability, safety, and functional requirements;

  • Design systems that are resistant to failures, noise, and parameter variation;

  • Plan, estimate, sequence, and measure the completion of work according to targets and metrics;

  • Elicit, document, and review requirements from all stakeholders: FAA, NHTSA, functional, DFX;

  • Generate and manage the product system-level requirements and architecture documents;

  • Architect data flow diagrams and subsystem interface control documents (ICDs);

  • Allocate requirements to architecture and subsystems and manage integration and validation;

  • Work across electrical, controls, software, mechanical, and power electronics engineering functions to develop product capabilities;

  • Design test-beds or simulations to develop system capabilities prior to vehicle integration;

  • Allocate and manage cost, weight, technology readiness Level (TRL), and reliability metrics;

  • Write test plans, coordinate tests, and document results including HALT and corner-conditions;

  • Manage closed-loop controls development software, sensors, actuators, and user interfaces including state machines, data flow, timing diagrams, fault detection, and recourse;

  • Work with software engineers to implement control laws into embedded controllers.


Qualifications


  • Excellent written and verbal communication skills, as well as presentation skills;

  • Bachelor's degree in Engineering;

  • New Product Development (NPD) and gate review process experience;

  • Outstanding organization, analytical, innovation, and problem solving skills;

  • FAR Part 23 system development process experience (aviation/aerospace);

  • Ability to manage a team;

  • Time and frequency domain math modeling, aliasing, stability;

  • Understanding of power, energy, HEV topologies, actuators, sensors, human-machine interface;

  • Methods: function flow, use case analysis, state machines, timing diagrams, data flow;

  • Process templates: DOD 498, ARP 4754, INCOSE Systems Engineering Handbook, V-Model;

  • Ability to use Microsoft Excel, Word, PowerPoint, and MATLAB;

  • Holds a valid US driver's license.


Highly Desired Qualifications


  • Master's degree in Engineering;

  • Automatic code generation;

  • Automotive control system development;

  • Formal Systems Engineering training or certification;

  • Closed loop multi-variable classical, state-space, and non-linear control theory ;

  • Experience with triple- and quadruple-redundancy methods for controllers and software;

  • Requirements management software such as DOORS, Code Beamer, Team Center, or other;

  • Managed release process, design review checklists, and change management;

  • PMP, project management, supervisory, or team leadership experience;

  • Lab equipment: oscilloscopes, data acquisition, hi-pot, spectrum analyzers;

  • DFSS, Design of Experiments, Axiomatic, P-Diagrams;

  • Filtering and Digital Signal Processing;

  • C programming.



 
Job Number: 18-13614
Job Location: Woburn, MA
Rate: 135000.0USD/Year
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2018-04-05 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Deborah Allaire
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Designer - Electronic/Electrical Design III - (MO) (UG NX8)

Description:
Confidential Secret, NOT REQUIRED to start

Develops, maintains and releases electrical/mechanical drawings, systems designs or engineering documentation and data by applying company, industry and governmental standards. Using design tools prepares documentation and incorporates design changes. Creates, develops and maintains systems designs by preparing design layouts, modifying existing designs and assisting in identifying design discrepancies. Supports engineering system design and functionality validation activities. Develops and maintains product installation designs and part designs ranging from simple to moderately complex. Coordinates activities and products with internal partners and external suppliers. Works under general direction.

The successful candidate will be responsible for electronic/electrical component packaging, fixture/test station design. This will include the electronic/electrical/mechanical design process from detailed parts to complex mechanical assemblies, by selecting components, preparing design layouts, modifying existing designs and resolving complex design discrepancies to satisfy both customers and producibility requirements. This person will work closely with electrical engineering groups throughout all design phases and the fabrication teams during the build process.

o 10 + years of experience in mechanical design, including mechanisms, structures and/or electronic packaging.
o Working knowledge of 3-D solid modeling
o Experience creating drawings using Computer Aided Draft systems, specifically Unigraphics NX8
o The Person selected shall meet the International Traffic in Arms Regulation (ITAR) requirements to work on government contracts

AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.

ACS Group (formerly 'Comforce')
 
Job Number: UGEETechDesMO
Job Location: Berkeley, MO
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 10+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Designer - Wiring Installation Design III & IV - (PA)

Description:
Leads, develops, maintains and releases electrical/mechanical drawings, systems designs or engineering documentation and data by applying Company, industry and governmental standards for multiple customers. Manages, interprets and develops design requirements. Uses design tools to document and maintain configuration design control. Manages, creates, develops and maintains complex systems designs by preparing design layouts, modifying existing designs and integrating systems elements. Validates complex engineering system design and functionality. Leads the process for product installation designs and part designs ranging from simple to complex. Coordinates activities and products with cross-functional groups, internal partners and external suppliers. Reviews and assigns work to others. Works under minimal direction. Additionally: Candidates selected for this position will design, develop, maintain and release electronic / electrical / mechanical drawings and 3D MBD Model based definition data packages using CATIA V5. Duties include developing aircraft helicopter cockpit layouts, designing various instrument and switch panel assemblies, electronic boxes, avionics racks and shelves and all other aircraft type electrical and avionics aircraft installations. Responsible for investigating design precedents to document and maintain configuration control of engineering designs for use by downstream organizations, and developing aircraft electrical equipment configurations for multiple customers while applying company, industry, and governmental standards. Job requires strong technical skillset in CATIA V5 and 3D model based master definition engineering, as well as experience in creating and revising 2D engineering for details, assemblies, and installations for electrical equipment for aircraft applications. Experience with Teamcenter PDM is preferred. CATIA V5

AA degree in related discipline and typically 6 or more years of related experience or an equivalent combination of education and experience.

ACS Group (formerly 'Comforce')
 
Job Number: EEDesignPA
Job Location: Ridley Park, PA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Designer I

Description:
Tech Designer I

Location: Savannah, GA
Pay Rate: $26/hr - $29.13/hr
Duration: Long Term W2 Contract
Shift: First

Unique Skills:
-Associate degree in electrical engineering preferred.
-Experience with aircraft system wiring diagrams preferred.
-Experience with Mentor Graphics CHS or AutoCAD preferred.

Education and Experience Requirements:
-Associates degree in drafting, design, engineering, manufacturing technology, or equivalent combination of education/experience sufficient to successfully perform the essential job functions.
-Two (2) years related experience.
-Familiarity with computer-aided design systems and basic personal computing. Basic knowledge of engineering, engineering procedures and design drawing standards.

Position Purpose:
Under direct supervision, performs a variety of basic engineering tasks in a specialized area, receiving instruction as to the tasks required and the expected results. Prepares and maintains electronic datasets for engineering drawings with the assistance and direction of more experienced engineering personnel.

Principal Duties and Responsibilities/Essential Functions:
1. Applies knowledge of common design and drafting principles, guidelines, specifications and standards to create basic electronic layouts, sketches, models, and drawings.
2. Obtains form, fit and functional data and verification from engineers or senior designers.
3. Coordinates drawing requirements and release with engineers and senior engineers.
4. Reconciles and integrates the input of engineers.
5. Develops and recommends alternatives to simplify and clarify design intent.
6. Incorporates information from sketches, notes, layouts and markups to produce graphic representations of designs using computer-aided design tools (Mentor Graphics, Oracle, Cadam, Catia, etc.).
7. Reviews work for accuracy and completeness prior to drawing check.
8. Follows established procedures to produce and revise electronic datasets.

Additional Functions:
1. Takes on special projects as assigned.
2. Performs other duties as assigned.

Other Requirements:
1. Good analytical, interpersonal, communication and visualization skills.
2. Ability to work both independently and in a team environment.
 
Job Number: 8815
Job Location: Savannah, GA
Rate: 26-29
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Engineer

Description:


Description:

ELECTRICAL POWERTRAIN SYSTEM CONTROLS TEST ENGINEER

Automotive development and testing of electronic control units in the following areas:
- Engine controls.
- Powertrain controls -- 4WD systems, engine mount control, electronic oil pumps, & hybrid electric vehicle support systems.
- Transmission & shift-by-wire controls.

The responsibilities for each area would include writing hardware and software specifications, performing confirmation testing on the actual car and simulator, troubleshooting and fixing related problems, writing and presenting reports, working with component suppliers and other departments to resolve technical issues, researching new technologies and market trends, and making proposals for future products. Other responsibilities also include researching new technologies and market trends and making proposals for future products.

Qualifications

A Bachelor’s degree in Electrical Engineering, Computer Engineering, or Software Engineering and a minimum of 1 year experience or equivalent combination of education and experience required. Strong knowledge of electrical hardware and software development required. Interest in the automotive field and experience in the use of electronic measuring equipment and electrical troubleshooting experience desired. Proficient PC Skills (Excel, Word, PowerPoint and other technical software) and excellent communication/interpersonal skills required. Ability to travel and work overtime may be required.
 
Job Number: NSR10012TE
Job Location: Columbus Area, OH
Rate: Open
Per Diem: No
Overtime: Straight
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NSR GROUP
Attention: Mariko Akiyama
Address: 655 METRO PL S STE 600-44
City, State: DUBLIN, OH 43017
Phone: 614/798-0671
Fax Phone: 614/439-4932
Website: www.nextsr.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Engineer

Description:


Description:

ELECTRICAL POWERTRAIN SYSTEM CONTROLS TEST ENGINEER

Automotive development and testing of electronic control units in the following areas:
- Engine controls.
- Powertrain controls -- 4WD systems, engine mount control, electronic oil pumps, & hybrid electric vehicle support systems.
- Transmission & shift-by-wire controls.

The responsibilities for each area would include writing hardware and software specifications, performing confirmation testing on the actual car and simulator, troubleshooting and fixing related problems, writing and presenting reports, working with component suppliers and other departments to resolve technical issues, researching new technologies and market trends, and making proposals for future products. Other responsibilities also include researching new technologies and market trends and making proposals for future products.

Qualifications

A Bachelor’s degree in Electrical Engineering, Computer Engineering, or Software Engineering and a minimum of 1 year experience or equivalent combination of education and experience required. Strong knowledge of electrical hardware and software development required. Interest in the automotive field and experience in the use of electronic measuring equipment and electrical troubleshooting experience desired. Proficient PC Skills (Excel, Word, PowerPoint and other technical software) and excellent communication/interpersonal skills required. Ability to travel and work overtime may be required.
 
Job Number: NSR10011TE
Job Location: Columbus Area, OH
Rate: Open
Per Diem: No
Overtime: Straight
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NSR GROUP
Attention: Mariko Akiyama
Address: 655 METRO PL S STE 600-44
City, State: DUBLIN, OH 43017
Phone: 614/798-0671
Fax Phone: 614/439-4932
Website: www.nextsr.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Engineer

Description:


Description:

Automotive Validation & Development Process Engineer - Chassis & Safety Electronic Control Systems

Requirements:
•BS Degree in ME/EE.
•6 years of related experience may be substituted for required degree.
•1-5 years of related engineering experience in validation of electronic control systems and related development processes.
•Valid U.S. driver’s license.
Able to apply engineering principles, experiences and various analysis tools to develop test plans and procedures to test components to determine design feasibility and ensure components meet design acceptance criteria, performance level targets, and any applicable regulatory/internal standards.

Candidate will be responsible to work with the company validation engineers to:
•Document prototype vehicle change points.
•Coordinate test specifications and standards.
•Create test plans and coordinate scheduling of tests.
•Prepare test equipment and prototype vehicle for testing.
•Conduct moderately complex validation on prototype vehicles.
•Analyze test results and perform root cause analysis for test failure.
•Organize review meetings for development stages.
•Document and present test results in clearly written reports/presentations.

Ideal candidate will possess a good understanding of automotive electronics development and respective development process. Excellent written and verbal communication are extremely important due to the complexity of the systems integration.
 
Job Number: NSR10014TE
Job Location: Columbus Area, OH
Rate: Open
Per Diem: No
Overtime: Straight
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NSR GROUP
Attention: Mariko Akiyama
Address: 655 METRO PL S STE 600-44
City, State: DUBLIN, OH 43017
Phone: 614/798-0671
Fax Phone: 614/439-4932
Website: www.nextsr.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Integ Analyst 2

Description:
Tool Integ Analyst 2
 
Location: Everett, WA
Duration: 6 Months
 
Description:
Assists in gathering supporting data to develop estimates and schedules. Gathers and prepares tooling product data, presentation and support materials for manufacturing, procurement and shop-floor teams. Gathers and prepares data for upload into offload tooling business systems. Identifies, coordinates and process customer requirements for tooling products or information. Assists in the creation of and updates project schedules. Assists in reviewing and creating tooling product documentation and procedures. Performs tooling product order processing. Prepares order packages for distribution. Performs associated general administrative duties. Manages electronic or physical drawings. Works under general supervision.
 
Education / Experience:         
AA degree in related discipline and typically 1 or more years of related experience or an equivalent combination of education and experience.
 
Skill Code: D47-Tool Data Administration

Please share updated resume at ravi@iconma.com if interested.
 
Job Number: 18-04441
Job Location: Everett,, WA
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/234-6123
800 Phone: 866/914-9724
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Web Developer - Secret Clearance

Description:
Job Description:
Web Developer to design and maintain database solutions for the Air Force (AF) Office of Strategic Development Planning and Experimentation (SDPE). This candidate will utilize front-end technologies (HTML, CSS, & Javascript), as well as utilize creative skills to customize SDPE SharePoint applications and support the content management of those sites.

This support will include developing or enhancing SharePoint applications and functionality to include Capability Development Tracker and Air Force Toolbox capabilities, collaborating with stakeholders to identify and accept requirements for updates and enhancements, maintain business operations workflow and ensure design is compliant with federal IT standards, collects and manages feedback from users for future enhancements or improvements, and develops and maintains technical documentation for end-users and future technical administrators to ensure continuity of operations and the use of best practices. Work location is at Wright-Patterson AFB in Dayton, OH and sit within AFRL/RS SDPE office.

REQUIREMENTS
Education/Experience: A Bachelor's degree with two (2) years of experience in an IT field is required. Requires SECRET security clearance.

Knowledge, Skills and Abilities:
Candidate should have experience using SharePoint, HTML and CSS. Experience in data capture and analysis, and knowledge of SQL Server as a backend database for SharePoint applications.
Computer skills, including Microsoft Office Suite, experience with web platforms (e.g. SharePoint 2013), and electronic communications.
Ability to apply standard software engineering methods and project lifecycle management techniques to deliver sound software and documentation.
Proven ability to organize and share information effectively and understanding of how to visualize / present data for different users and audiences. Interpersonal skills working with multi-level stakeholders, including technical and subject matter experts, government agencies, local partners, researchers and others.

Other required skills include:
Interviewing skills, to talk with individuals and groups about their needs and ask the right questions to surface essential requirements information
Listening skills, to understand what people say and to detect what they might be hesitant to say
Analytical skills, to critically evaluate the information gathered from multiple sources, reconcile conflicts, decompose high-level information into details, abstract up from low-level information to a more general understanding, distinguish presented user requests from the underlying true needs, and distinguish solution ideas from requirements
Facilitation skills, to lead requirements elicitation workshops
Observational skills, to validate data obtained via other techniques and expose new areas for elicitation
Writing skills, to communicate information effectively to customers, marketing, managers, and technical staff
Organizational skills, to work with the vast array of information gathered during elicitation and analysis and to cope with rapidly changing information
Interpersonal skills, to help negotiate priorities and to resolve conflicts among project stakeholders (such as customers, product management, and engineering).

PREFERRED SKILLS
Experience in SharePoint Designer 2013 and 2010. Experience using JavaScript in the SharePoint 2013 platform. Working knowledge of Air Force IT systems. Strong communication and presentation skills.

Full Time / Part Time?
Full Time

US Security Clearance Required?
Yes

Special Requirements/ Certifications:
Candidates must be a U.S. Citizen 
Opportunity for contract-to-hire based on worker performance, worker attendance and dependability and client business needs 
 
Job Number: 18-12159
Job Location: Dayton, OH
Rate: OPEN
Per Diem: Split
Overtime: Possible
Duration: 4 Month Contract-TO-Hire
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Cody Grimes
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wire Design & Installation Engineer III & IV - (PA)

Description:
SEVERAL OPENINGS IN RIDLEY PARK, PA.

Develops and maintains cable/wire harness detail and assembly designs. Analyzes results and performs design reviews. Leads the team to analyze results and performs design reviews. Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Documents processes, specifications and procedures that support the design and manufacture of electrical commodities. Develops complex statements of work, metrics, schedules and budgets. Performs technical review of supplier capabilities to facilitate source selection. Works under minimal direction.
Additionally...Candidates selected for this position will design, develop, maintain and release electronic / electrical / mechanical drawings and 3D MBD Model based definition data packages using CATIA V5. Duties include developing aircraft helicopter cockpit layouts, designing various instrument and switch panel assemblies, electronic boxes, avionics racks and shelves and all other aircraft type electrical and avionics aircraft installations. Responsible for investigating design precedents to document and maintain configuration control of engineering designs for use by downstream organizations, and developing aircraft electrical equipment configurations for multiple customers while applying company, industry, and governmental standards. Job requires strong technical skillset in CATIA V5 and 3D model based master definition engineering, as well as experience in creating and revising 2D engineering for details, assemblies, and installations for electrical equipment for aircraft applications. Experience with Teamcenter PDM is preferred.

Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

ACS Group (formerly 'Comforce')
 
Job Number: EEpa
Job Location: Ridley Park, PA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

Back to Advanced Job Search