Job Search Results

673 listings were found that matched your search words: Keywords: Mechanical ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2020/01/20 Monday 09:18AM Pacific Time by ContractJobHunter. )

Listings 1 - 673

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2520 - QUALITY ANALYST - cv, word doc only

Description:
Implement innovative solutions that will improve the way we do business, improve quality and customer satisfaction, and reduce costs.

Manage quality projects to meet specific requirements and customer satisfaction.

Support projects by facilitating adequate communication with all stakeholders.

Be an agent of change to promote quality culture throughout the company.

Being able to investigate and identify risks.

Be a leader of opportunities for continuous improvement and problem solving.

Manage priorities in line with objectives.

Bachelor's degree in Mechanical or Industrial Engineering or DEC in Engineering or Aeronautics with a minimum of 5 to 8 years of relevant experience.

Bilingual - have a good command of French and English.

Knowledge of standards and regulations (AS9100, TCCA, FAA, EASA).

Desire for continuous improvement and problem solving.

Ability to work under pressure and meet deadlines.

Analytical spirit and ability to solve problems effectively.

Hold leadership, autonomy, ability to work in a team and professionalism.

Have a logical and flexible mind with a sense of initiative and attention to detail.

Knowledge of Microsoft computer systems.

PMP certification or experience in project management is an asset.

Project management and change management tools required.

Strongly client oriented.

Capable of influencing and mobilizing collaborators.
 
Job Number: 2520
Job Location: Mirabel, QC, Canada
Rate: 51.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 01/04/2019
Last Updated: 03/22/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2523 - HYDRO-MECHANICAL SYSTEMS ENGINEER - cv, word doc only - On Hold

Description:
Take part in the integration of the flight control, hydraulic and/or landing gear system for the definition, specification, design, analysis, modification, test and certification of hydro-mechanical systems

Coordinate product development activities between the supplier of the system and the affected work packages

Ensure successful design, validation, certification and delivery of the system

Ensure successful completion of each development phase deliverables (may author, review, approve)

Problem solve the technical issues in a cross functional environment

Be involved in the design and integration of the system

Review the design and documentation of all the aspects related to your system

Check for quality of the Supplier's analyses

Validate and verify system requirements as well as system performance through design reviews, analyses, rig and aircraft testing

Define, prepare and execute qualification and certification tests

Work with supplier in the investigation and resolution of test findings

Bachelor or Master's (preferred) degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of five (5) to seven (7) years

Background in design, integration, development and certification of Hydro-Mechanical Systems

Cognizant of the relevant Airworthiness Regulations and certification process

Good oral and technical writing skills in English (required)

Motivated, self-starter, organized, autonomous and able to work under limited supervision

Team player and able to work with suppliers and customers

Dynamic person with initiative, a strong sense of responsibility and good judgment

Knowledge of MS Office software (essential)

Knowledge of CATIA, Matlab, Simulink (an asset)
 
Job Number: 2523
Job Location: Toronto, Canada
Rate: 57.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 05/09/2019
Last Updated: 05/09/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2524 - PROPULSION SYSTEMS ENGINEER - cv, word doc only

Description:
Design and integration of the system.

Review of the design and documentation of all the aspects related to your system.

Checking for quality of the Supplier's analyses.

Validation and verification of system requirements.

Validation and verification of system performance through design reviews, analyses, rig and aircraft testing.

Definition, preparation and execution of qualification and certification tests.

Working with supplier in the investigation and resolution of test findings.

Preparation or review of qualification or certification reports.

Working with suppliers to establish complete system requirements and system interfaces.

Liaison with stress, loads, reliability, maintainability and safety (RM&S), simulation, customer and operations support departments.

Identify issues and obstacles, follow-up and communicate progress.

Prepare reports or presentations.

Bachelor or Master's (preferred) degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of five (5) to seven (7) years.

Background in design, integration, development and certification of Propulsion Systems.

Cognizant of the relevant Airworthiness Regulations and certification process.

Good oral and technical writing skills in English and French (required).

Motivated, self-starter, organized, autonomous and able to work under limited supervision.

Team player and able to work with suppliers and customers.

Dynamic person with initiative, a strong sense of responsibility and good judgment.

MS Office software (essential).

Good knowledge of DO-160, FAR/CAR25 Regulations.

Previous experience in providing engineering support to a Final Line/Production would be an asset.
 
Job Number: 2524
Job Location: Toronto, Canada
Rate: 57.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 04/25/2019
Last Updated: 05/22/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2525 - METHODS ENGINEER - AFTERNOON SHIFT - cv, word doc only

Description:
Support the Client Final Line Assembly activities for a timely resolution of production line issues related to system integration.

Witness system functional testing and conduct technical investigations / troubleshooting on Hydro-Mechanical Systems (ATA 27, ATA 29, ATA 32), analyze and develop solutions / recommendations.

Support production to resolve non-conformance (NCR), tooling issues and procedure clarification / correction.

Track and ensure successful implementation of systems installations and modifications

Support the line by producing return into service (RTS) documentation.

Develop good working relationships with various departments within BA and with all suppliers

Bachelor Degree in Engineering or Master Degree (Aerospace Manufacturing, Aircraft Maintenance etc.).or a diploma from a technical college.

3-8 years%u2019 experience in aircraft Electrical and Avionics systems (Communication, Electrical Power, Indication/Recording Systems, Navigation, and Information Systems)and / or in Hydro-Mechanical Systems (Fly-by-Wire systems, Wing High-Lift, Landing gear, Hydraulic Systems).

Experience in providing support / troubleshooting to Aircraft Maintenance / Final Line / Production Line / Test Bench / Simulator.

Are process oriented.

Possess strong analytical skills, you are a quick learner.

Are a team player, able to work in high-stress environment.

Have excellent interpersonal and communication skills.

Autonomous persons, capable of managing time and prioritites

Must have a good knowledge of MS Office and Requirements Management tools.

Knowledge of SAP is an asset.

Knowledge of MES is an asset.
 
Job Number: 2525
Job Location: Toronto, Canada
Rate: 51.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 01/04/2019
Last Updated: 04/04/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2529 - HYDRO-MECHANICAL SYSTEMS ENGINEER

Description:
Integrate hydromechanical systems on CRJ Family of aircraft (including landing gear, flight control, hydraulic systems, etc.).

Provide the required hydromechanical expertise and support for the integration with other disciplines (including design, RM&S, airworthiness, electrical, avionics,
propulsion, etc.).

Coordinate with system suppliers to achieve good integration.

Investigate system problems identified on aircraft in service or in production.

Provide engineering dispositions and repair procedures.
Support Continuous Airworthiness (CAW) processes.

Analyze and approve new system concept proposals and integrate them in aircraft documentation.

Ensure that all new hydromechanical system concepts meet applicable aircraft system requirements (FAR, RTCA DO160, etc.) and Client Aerospace requirements and practices.

Communicate and coordinate with Transport Canada's design approval designees (DADs).

Prepare requirement documents including technical quotations, system schematics, TRDs and statement of work (SOW).

Prepare and/or review system definition drawings, qualification documentations, functional test engineering requirements (FTER), Test definition Sheets (TDS), design compliance reports, reliability reports and other system certification
reports.

Provide technical support to the production line and to in-service aircraft as required.
University degree in Engineering or equivalent experience, in the mechanical field. A specialization in aeronautical applications is desirable.

Technical experience on the Client family of aircraft is an asset.

Must have strong English (written and spoken) communication skills.

Manage various projects under strict budget and schedule requirements.

Are able to manage conflicts and solve problems.

Are self-starter, enthusiastic, well organized and customer oriented.
 
Job Number: 2529
Job Location: Mirabel, QC, Canada
Rate: 54.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 04/25/2019
Last Updated: 05/09/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2531 - CABIN SYSTEMS ENGINEER - cv, word only

Description:
Act as an engineering integrator for the definition, specification and interfaces, design, analysis, interface with suppliers, development, test and certification for Client Inflight Entertainment, Connectivity and In Seat Power Supply System.

Review, assess and approve engineering documentation and drawings.

Interface with other specialist work packages, such as installations, stress, EMI, e.t.c to ensure your assigned systems optimization on Aircraft.

Bachelor degree or equivalent in mechanical or electrical engineering and a minimum of 10 years of engineering experience dealing with Aircraft systems, preference will be for previous experience with above mentioned prime responsibility systems.

Working experience with MS Office; CATIA and Enovia skills will be a definite asset.

Familiar with the specification, design, integration, certification and acceptance of Aircraft systems equipment. (knowledge on DO-160 regulation will be an asset)

Have good oral and written skills in English; French will be a definite asset.

Ability to work with minimum supervision and you are a team player

Have initiative, a strong sense of responsibilities and good technical judgment.

Strong leadership to conduct a team in successful achievement of milestone in multidisciplinary technical team.

Strong knowledge of Commercial Aircraft interior cabin systems including in-flight entertainment system and connectivity network.
 
Job Number: 2531
Job Location: Mirabel, QC, Canada
Rate: 53.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 05/22/2019
Last Updated: 05/29/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Engineer - Fuel Systems

Description:
Sr. Mechanical Systems Engineer:

Must also have experience with the following:

• Must have clean sheet design experience
• Must have a fuel systems background.
• System analysis – perform pressure drop analysis, among other analysis.
• System testing required for PDR.
• Integration of entire system into aircraft for PDR.
• Create detailed models.
• Spec out system parts.
• Coordinate/support manufacturing
• FAR Part 23 experience is a huge plus



The Structures Company is an AA/EOE.
 
Job Number: 252
Job Location: Manassas, VA
Rate: $80/Hr.
Per Diem: Yes
Duration: 9 Months - Possibly Longer
Start Date: ASAP
Input Date: 03/27/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
AIRFRAME & POWERPLANT TECHNICIAN

Description:
Johnson Service Group is currently seeking a Airframe & Power Plant Technician to work for our client.

Adjusts, aligns, and calibrates aircraft systems, using hand tools, gauges, and test equipment.
Examines and inspects engines or other components for cracks, breaks or leaks.
Disassembles and inspects parts for wear, warping, or other defects.
Assembles and installs electrical, plumbing, mechanical, hydraulic and structural components and accessories using hand tools and power tools.
Services and maintains aircraft systems by performing tasks, such as flushing crankcase, cleaning screens, greasing moving parts, and checking brakes.
Repairs, replaces and rebuilds aircraft structures, functional components, and parts, such as wings and fuselage, rigging and hydraulic units.
Reads and interprets manufacturers and airline’s maintenance manuals, service bulletins, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components
Tests engine operating, using testing equipment to locate source of malfunction.
Minimum Education, Licensure, or Certification (or Substitute Experience) Required:

Airframe and Power plant License Required, high school diploma or equivalent required.
Basic knowledge of operating a personal computer or laptop.
Knowledge of job-specific machines and tools, including their designs, uses, repair, and maintenance.
Capable of repairing machines or systems using the needed tools
Ability to determine the kind of tools and equipment needed to do a job
Able to perform routine maintenance on equipment and determine when and what kind of maintenance is needed.
Capable of determining causes of operating errors and deciding what to do about it.
Able to perform tests and inspections of products, services or processes to evaluate quality or performance.
Able to install equipment, machines, wiring, or programs to meet specifications
Ability to control operations of equipment or systems
Ability to use logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.
Able to monitor gauges, dials or other indicators to make sure a machine is working properly.
Minimum Experience Required:

Minimum 1-2 years’ experience performing scheduled and unscheduled maintenance to include: 12/24/36/72 month inspections on charter and/or corporate mid-size jets.
Gulfstream model experience preferred.
 
Job Number: 368921
Job Location: Van Nuys, CA.
Per Diem: If Qualified
Overtime: Possible
Duration: Temp-Direct
Start Date: ASAP
Input Date: 10/08/2018
Last Updated: 02/15/2019
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airframe Structural / Stress Engineer

Description:
The Airframe Structural Analysis Group is responsible for the structural integrity of the airframe fuselage, landing gear, propulsion installations and all other attachments to airframe fuselage, including electrical, controls and dynamic systems attachments.
Responsibilities cover Composite and Conventional structures and extend from conceptualization on through development, manufacturing and field service support.

Specific functions include:
•Static Structural Analysis and Margin of Safety Determination,
•Fatigue and Fracture Mechanics Analysis of Critical Interfaces,
•Determination of Airframe component replacement and / or retirement times,
•Specification and Design of Airframe related Static and Fatigue tests,
•Field Support and
•Formal Engineering Documentation.

Education requirement:
BS in Mechanical Engineering, Aerospace Engineering or Chemical Engineering (MS or ME preferred)

Work Experience Required:
•Minimum of 10 years of experience in the functions described above.
•Strong familiarity with Finite Element Modeling of airframe structure for static and fatigue purposes.
•Excellent oral and written communication skills are required.
Software Experience: •NASTRAN/PATRAN or equivalent FEM,
•CATIA,
•MS Office applications.

Secret Clearance preferred but not required.
 
Job Number: 1910096548
Job Location: Stratford, CT
Per Diem: split
Duration: 1.5 years
Start Date: ASAP
Input Date: 01/31/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
System Design Engineer - Bleed Air

Description:
General Summary:
The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
• Must have experience with system layout/conceptual design of aircraft bleed air systems during conceptual/preliminary design phase Aircraft experience
• Prepare 3D installation and detail models of the BAS and VCS.
• Prepare 2D installation, assembly and detail drawings of the BAS and VCS.

Education, Work Experience, Certification and/or Licensure:
• Bachelors of Science - Aerospace or Mechanical Engineering from an accredited four year college or university program with 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.

Knowledge, Skills and Abilities:
• Experience using CATIA V5 to prepare 3D parametric models and 2D drawings.
• Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia)
• Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS.


The Structures Company is an AA/EOE.
 
Job Number: 240
Job Location: NC
Rate: $55-$60/Hr.
Per Diem: Yes
Overtime: Yes
Duration: 12+ Months
Input Date: 01/24/2019
Last Updated: 02/12/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CAD Designer

Description:
Must Be Eligible for a Clearance

Experience in the manufacture of Mechanical assemblies
Strong mechanical design background
Proficient in the Catia V5, Part Design module
Proficient in the Catia V5, Assembly Design module
Proficient in the Catia V5, Generative Shape Design module
Proficient in the Catia V5, Functional Tolerancing & Annotation module
Proficient in GD&T
ASME Y14.100 Engineering Drawing Practices
 
Job Number: 46079
Job Location: VA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mos +
Start Date: ASAP
Input Date: 03/04/2019
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CAD Designer

Description:
Our client, a market leader and technology innovator, is seeking talented professionals to deliver cutting edge solutions to their customers. Well-respected, with a global presence, our client consistently offers a powerful and robust portfolio of products, services and solutions that help customers successfully execute their missions in today’s dynamic environment. With unsurpassed engineering, using an open systems approach, our client solves the nation’s most complex challenges while foreseeing future needs.

CAD Designer
(US Citizenship Required*)
Marion, VA
2019-7653

Responsibilities:
• 3D design and model mechanical hardware
• Applying 3D dimensions and text to 3D models using the FT&A module
o 3D-Model Based Definition
• Generate 3D-PDF files using Anark software

Qualifications:
• Tool Design Experience
• Must be proficient in
o Catia V5 Solid Modeling and Assemblies, the Model Base Definition (MBD) process
o Catia V5 “Product Functional Tolerancing & Annotation” workbench
o Catia V5, Part Design module
o Catia V5, Assembly Design module
o Catia V5, Generative Shape Design module
o Catia V5, Functional Tolerancing & Annotation module
• Proficient in GD&T
• Strong mechanical design background
• ASME Y14.100 Engineering Drawing Practices
• ASME Y14.5 Dimensioning and Tolerancing
• ASME Y14.41 Digital Product Definition Data Practices
Preferred:
• Windchill PDM System
• Mechanical Engineering Degree
• Experience in the manufacture of mechanical assemblies
*US Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Associate's degree or equivalent is required plus a minimum of 5 years of relevant experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-7653
Job Location: Marion, VA
Rate: Based on experience
Duration: 6 Months
Input Date: 02/21/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Detrom Garrett
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Machinist - Aerospace - Ellensburg WA Area

Description:
Keltia Design Inc is a technical support services company providing CAD design, CAD Training along with Specialized Technical Recruiting services to mainly the aerospace industry around the US. We have been in business since 2000.

CNC Machinist

Sets up and operates a variety of machine tools such as lathes, milling machines, shapers, planers, and precision grinders to make metal parts, mechanisms, tools, or machines to exacting tolerances and dimensions.

Responsibilities
Interprets blueprints, sketches, and engineering specifications; determines sequence of operations, number of cuts required, and method of setup; uses a variety of machinist's hand tools and precision measuring instruments; makes standard shop computations relating to dimensions of work, tooling, feeds, and speeds; measures, marks, and scribes dimensions and reference points to lay out stock for machining; fits and assembles precision parts into mechanical equipment and determines material, parts, and equipment required.

Some machines may be numerically controlled. May monitor and verify quality in accordance with statistical process or other control procedures and certify/test product.

Here are the possible Benefits with this Client
Medical, dental, vision, long term disability and life insurance benefits
PTO/ Holiday pay - Eligible upon hire
401(k) plan with Company matching

Qualifications
Must be able to efficiently setup and run one or more of the following types of equipment independently and meet expected manufacturing standards:
CNC Mill
CNC Turn
Experience & Knowledge
Required knowledge of GD&T, and ability to read blueprints, parts drawings, and setup books.
Preferred Math skills such as algebra, geometry, and trigonometry.  Desire to work in team environment: work positively and collaboratively with others, contribute to the work cell, be open and receptive to ideas and feedback, and treat others with respect
Skills & Competencies:
High school diploma or equivalent with 1-2 years related experience.
Post high school coursework or professional certification preferred.
 
Job Location: Ellensburg, WA
Rate: DOE
Duration: Contract to Direct
Start Date: ASAP
Input Date: 11/10/2018
Last Updated: 02/01/2019
Firm Name: KELTIA DESIGN INC
Attention: Becky
Address: 2615 W CASINO RD UNIT 1A
City, State: EVERETT, WA 98204
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Certification Engineer

Description:
Responsible for defining and overseeing implementation of certification engineering requirements for United Rotorcraft, Federal Aviation Administration (FAA)/Organization Designation Authorization (ODA) and engineering activities. Responsible to derive, define, and apply design requirements from the regulations for implementation by technical staff. Prepare and completion of Compliance Checklists, Certification plans, Conformity Inspection Plans, and compliance summaries for assigned Supplemental Type Certificate (STC) projects. Work effectively in a multi-disciplined environment of structures, mechanical/electrical systems, and avionics commonly found in aircraft certified under 14 Code of Federal Regulations (CFR) part 25 and 27, and in US Military aircraft. Significantly impacts the company’s ability to consistently meet regulatory, commercial, and technical obligations utilizing strong problem solving skills.

• Review previously produced certification documents, drawings, technical data, and test data as benchmarks for preparation for preparation of future documents.

• As a member of the design team (project engineer, functional lead, and certification engineer), coordinate and finalize the preparation of certification documentation per project compliance check list. This includes, but is not limited to, Structural/Mechanical/ Electrical/Avionics Compliance documents, Standard Parts Lists, Commercial Parts Lists, Test Plans, Test Reports, ICA’s, RFMS’s, etc. Participate in preparation/revision of configuration control drawings, listings and indexes, and flammability requirements as required.
• Bachelor’s degree (BS/BA) in Aeronautical, Mechanical or Electrical from four-year college or university, or five to eight years’ experience in an authorized repair station working directly with records required to alter, repair, maintain and return-to-service 14 CFR part 25, part 27, and/or part 27 aircraft.
• 5-8 years analysis, design and development experience in aviation field or equivalent and related military experience preferred.
• 3-5 years’ experience performing tasks consistent with Certification Engineer 2 or equivalent experience preferred.
• Advanced knowledge and understanding of the FAA certification process, with familiarity and experience with 14 CFR and Department of Defense (DOD) regulatory requirements preferred
 
Input Date: 01/10/2019
Firm Name: JOHNSON SERVICE GROUP
Address: 1600 AIRPORT FWY STE 400
City, State: BEDFORD, TX 76022-6871
Phone: 817/545-4009
Fax Phone: 817/545-2006
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Checker

Description:
Must Be Eligible for a Clearance

Designs and oversees the plant or manufacturing systems, fabrication, installation, modification, maintenance, and repair of mechanical equipment such as conveyor systems, production machinery, and other material-handling equipment used in fabrication, assembly, and other production functions; analyzes engineering sketches, specifications and related data, and drawings to determine design factors such as size, shape, and arrangement of parts; oversees the construction of machine and subassemblies considering such specifications as gear ratios, bearing loads, and direction of moving parts; compiles and analyzes test data to determine effect of design on machines in relation to factors such as temperature, pressures, speed, horsepower, and fuel consumption.
 
Job Number: 45797
Job Location: TX
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 01/04/2019
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Unigraphics Design Engineer

Description:
Sr. Design Engineer


Location: Colorado Springs, CO

Contract with potential to convert to permanent




Position Purpose/Objective

The Design Engineer is charged with creating robust designs of structural components, electro-mechanical mechanisms, upholstery, cushions, decorative panels, and assemblies of these components. These designs are created using 3D CAD modeling software; and verified through finite element analyses and testing. The individual contributor will provide engineering deliverables through all phases of development from concept generation through certification testing and initial production implementation. This includes identifying root cause to issues, analyzing alternatives and executing the optimal design solutions. In addition, the individual will support efforts for design release, compliance to requirements, and internal cross-functional activities. In certain cases providing technical direction to engineering resources at our Global Engineering Center - India can be expected.




Essential Responsibilities:

Successfully execute design and development tasks required to certify and release specialty aircraft seats

Execute designs utilizing Unigraphics NX CAD system and Team Center Product Lifecycle Management software

Work as part of a cohesive engineering team and Integrated Product Develop Team (IPDT)

Understand requirements and evaluate new product structural integrity and functionality in support of meeting those requirements

Facilitate necessary regulatory and customer requirement testing to ensure product safety

Interact with internal and external customers and ensures satisfactory deliverables

Assist Engineering Management to coordinate the timely delivery of product design and customer proposal requests

Conceptualize and prepare preliminary and final detail design and documentation of systems components and assemblies

Support testing including the design and release of test fixtures

Create conceptual designs for proposals and document designs in technical documents

Work as a liaison with multi-site technical teams in Peshtigo WI, India, and Poland

Adhere to all UTAS rules and codes of conduct

Perform other duties as required




Education Required:

BA/BS Aerospace or Mechanical Engineering degree with at least 5+ years’ experience

MA/MS Aerospace or Mechanical Engineering degree with at least 2+years’ experience




Experience Required: Indicate the minimum years of experience and type of experience required to effectively perform the essential functions and responsibilities of this position.

At least 5 years working as a design engineer, preferably in a manufacturing environment

Strong communication skills

Strong interpersonal skills and ability to work in a team environment

Strong analytic skills including Root Cause Analysis, Strength of Materials, Statics

Unigraphics/NX CAD experience




Preferred:

Experience presenting solutions to internal and external customers

Experience with manufacturing processes (machining, sheet metal, plastic injection molding, plastic thermoform. . . )

Experience with Plant Operations and Assembly

Experience with Finite Element Modeling and Analysis

Experience working with international engineering support

Knowledge of upholstery design and execution

Team Center and Team Center Multi Site PLM experience

Experience in aerospace requirements/design

Knowledge of FAA and aerospace specifications

International design collaboration experience







Travel:


10% of time traveling




____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 55340
Job Location: Colorado Springs, CO
Rate: $33
Per Diem: Possible
Overtime: Possible
Duration: 6+ months
Start Date: ASAP
Input Date: 02/08/2019
Last Updated: 02/15/2019
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer / NX OH

Description:
Request number: 5753
Job title: Design Engineer
Number of openings: 2

Position location: Orville - OH
Employment type: Contract
OT exempt: No

Shift: 1st
Education Requirement: BS/BA
Driving on company time?: No

Maximum Hourly Pay Rate: 34
Start Date: 12/17/2018
Tentative End Date: 12/16/2019

Function:
As a Mechanical Design Engineer with Moog Flo-Tork, you'll play a key role in the analysis, conceptual design, and development of hardware used on military and commercial vehicles and equipment.

Here's more of what you can count on:
• Designing new actuators
- Analyzing and refreshing designs of actuators for previous ship classes
• Opportunities to use a broad range of skills. Our site is relatively small and you’ll be expected to utilize multiple engineering skillsets, but also will have the ability to tap into the resources and expertise of many other sites and groups
Keys to be considered a strong candidate:
• BS Degree in Mechanical Engineering and about 5 years of related engineering experience
• FEA and 3D CAD experience (NX) is a plus
- GD&T and experience with mechanical tolerance stackups
- Self-starter, with an aptitude for creative synthesis, and the ability to utilize and quickly learn advanced design and/or analysis techniques
• Experience with military designs/requirements
- Solid communication skills - this won't be that engineering job where you just sit at a computer all day!


Request status: Open
 
Job Number: MB-5753
Job Location: Orville, OH
Rate: 34/hr
Per Diem: no
Duration: 12 months
Input Date: 02/04/2019
Last Updated: 02/06/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ECS & Pneumatic Subsystems Engineer

Description:
Seeking an ECS & Pneumatic Subsystem Lead Engineer with strong experience enabling him/her to be responsible for all activities related to the design, development, integration, testing and certification of the Environmental Control System (ECS), Cabin Pressurization, Oxygen System, Anti-Ice System and Bleed Air Management for a supersonic business jet. The successful candidate will manage the ECS & Pneumatic systems design and system suppliers, as well as all design and certification activity required.

Duties include, but are not limited to:
• Develop ECS & Pneumatic systems design, architecture and product plans, including qualification and certification plans
• Provide subject matter expert level technical leadership, mentoring and guidance on both practical and theoretical aspects of ECS & Pneumatic systems
• Define requirements for the ECS & Pneumatic systems to ensure compliance with regulations and customer requirements
• Provide validation and verification of ECS & Pneumatic systems requirements
• Perform ECS & Pneumatic systems tests and certification, and provide system and certification documentation
• Manage the ECS & Pneumatic subsystem scheduling, budget, resources and suppliers
• Will be responsible for hiring, developing and leading talent to augment and seamlessly integrate with our world-class team and liaise effectively with our technical support partners.
• The selected candidate will help to define the product development strategy and lead a team of engineers and analysts in that effort.
• She/he will prioritize the allocation of the ECS & Pneumatic resources to meet the milestones of the program schedule, from concept through certification.

Minimum Requirements:
• Must be either a US citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772 and ITAR 120.12
• Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure/confidentiality agreement with current or former employer that would prevent you from performing the duties of the position.
• Minimum of a Bachelor’s Degree in Aerospace, Mechanical Engineering or other relevant Engineering position
• Master’s degree in a technical and/or management specialty preferred
• 10+ years of deep, hands-on experience in ECS systems development, design and testing in Military, Commercial and/or business jet aircraft
• 3+ years of demonstrated experience leading technical resources and teams, both internally and externally, as well as both on-site and off-site
• In-depth and current knowledge of Part 25 regulatory requirements
• Experience and expertise in the development of commercial and/or high-end business jets strongly desired
• Recent experience in developing ECS systems from concept through certification strongly desired
• Must be able to demonstrate a clear understanding, knowledge and ability to define requirements, generate architecture and achieve compliance
 
Job Number: 42-001
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: Possible
Duration: 1 year plus
Start Date: ASAP
Input Date: 07/15/2019
Last Updated: 07/22/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ELECTRONICS DESIGN ENGINEER

Description:
JSG is seeking an Electronics Design Engineer for our Aerospace Client in Glendale, CA.
LOCAL CANDIDATES ONLY - Direct Hire

Work as part of a world-class, multi-disciplinary team to develop ruggedized electronic products incorporating embedded microprocessors, and transition them into production for aerospace, military, sub-sea, and other harsh-environment applications.

Job Description:

Work from Marketing Requirements to develop electronic hardware designs incorporating embedded microprocessors responsive to the requirements, including
Product design architecture
parts and vendor selection
detailed hardware design and schematic generation and capture in PADS
preliminary parts layout for fit checks
work with PCB layout design team and PCBA vendors
work with mechanical design team
develop firmware/scripts/applications to test hardware
Debug and troubleshoot new designs
Execute functional verification of electrical subsystems
Support manufacturing for all designs including microprocessors, including
Work with Test Engineering to develop appropriate acceptance test stations in production
Troubleshoot problems in production and at customer sites
Work with Product Marketing and Business Development to prepare responses to customer Requests for Proposals
Customer specification review
Preliminary design concepts
Estimate engineering effort to execute designs and firmware/software
Preliminary bill of materials and costing
Basic Qualifications

Bachelor’s degree in Electrical Engineering, Computer Science, related filed or equivalent experience
10+ years overall experience in hardware design
High level of expertise in embedded microprocessor design and programming (C/C++, etc.)
Experience with Ethernet product design (10/100/1000BASE-T interfaces, PHYs, unmanaged switches.) 10GBASE-T interface experience a plus.
Skilled in the design and use of common I/O protocols (I2C, USB, JTAG, Ethernet).
High level of experience with hands-on troubleshooting and turn-on of new circuitry, including test bench equipment such as multi meters, DAQs, spectrum analyzers, JTAG and ICE probes, software, oscilloscopes, etc.
Experience in qualifying embedded systems to MIL-STD-810 MIL-STD-461 or IEC equivalents
Experience in failure analysis and troubleshooting skills in a production and R&D environment
Experience with prototyping solutions and bench testing methodology
Experience with test automation with background in scripting
Excellent technical writing skills and experience writing hardware, software, and interface requirements along with qualification test plans and procedures.
Able to handle ITAR data. Must be US Person or have Green Card.

Preferred Qualifications

Experience with military systems with battery charging, embedded protocol transceivers, microprocessor and FPGA-based systems
Experience with Ethernet product design and testing (Ethernet switch ICs, fiber-optic media converters, etc.)
Experience with digital video systems testing
HD-SDI, 3G-SDI, HDMI, DVI, DisplayPort
 
Job Number: 368920
Job Location: Glendale, CA.
Per Diem: No
Overtime: possible
Duration: Direct
Start Date: ASAP
Input Date: 10/03/2018
Last Updated: 02/15/2019
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EMBEDDED SYSTEM ENGINEER

Description:
JSG is hiring an Embedded System Engineer for a 15+ months contract opportunity in Stratford, CT!

Description:

Ground Test Engineer - Supports, performs, and manages a specific function within a larger mechanical system, often including hardware and mechanical parts.
Responsible for projects with significant scope and complexity covering all aspects of Ground Testing helicopter components and systems.

Requires application of all Mechanical/Aerospace Engineering disciplines to a wide variety of technical problems.
Typical tasks include detailed test planning, coordination with internal and external customers, test conduct, use of computer data analysis tools, and generation of test plans and reports.
Ground Test Engineers are responsible for final conclusions and recommendations on the performance, safety, qualification, and adequacy of tested components and systems.

This process may involve test and evaluation of components, assemblies and systems including main and tail rotor dynamic components, rotor drive systems, flight control systems, fuel systems, hydraulic systems, pneumatic systems, mission equipment, and airframe structure.
Test programs typically involve full scale fatigue and static evaluations of dynamic components, main and tail rotor whirl tests, airframe static tests, airframe shake tests, dynamic stability, component testing, and the evaluation of aircraft system level performance prior to flight.
Tasks also include the development and implementation of test procedures used to validate the performance of installed aircraft systems and components during final assembly, supporting and establishing operating limitations for both flight test programs and fielded aircraft, and oversight of supplier performed component qualification efforts.
 
Job Number: 368042
Job Location: Stratford, CT.
Per Diem: If qualified
Overtime: Possible
Duration: 15+ Months
Start Date: ASAP
Input Date: 08/31/2018
Last Updated: 02/15/2019
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ENGINEERING GROUND TEST LABORATORY TECHNICIAN

Description:
Engineering Ground Test Laboratory Technician

Stratford, CT

15+ Months Contract Opportunity



Structural lab technician capable of working from engineering drawings with limited guidance to fabricate and assemble structural and dynamic aircraft component test facilities.

Must be able to diagnose and repair hydraulic, mechanical and controls systems associated with test facilities required to support Engineering Ground Test Development programs.
Must possess a strong mechanical and fabrication background with emphasis on erecting mechanical structures to facilitate aircraft component testing.
Must possess a strong aptitude for industrial hydraulic component fabrication and assembly.
Must be able to read and interpret engineering mechanical drawings and fluid power schematics.
Must be able to work from elevated work platforms at various heights.
Must be willing and able to work in inclement weather.
Must be capable and comfortable working within a diverse team environment.
Must possess skills and aptitude to operate test facilities and data acquisition systems.
 
Job Number: 367128
Job Location: Stratford, CT.
Per Diem: If qualified
Overtime: Possible
Duration: 15+ Months
Start Date: ASAP
Input Date: 08/31/2018
Last Updated: 02/15/2019
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
Location: Savannah, GA
Rate: $68.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
1) AutoCad required, Catia V5 preferred
2) Gulfstream Completions electrical system design experience preferred.
3) 14 CFR 25 Subpart H - EWIS experience preferred
4) Part 25 Certification Experience for Cabin Interiors preferred
5) Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
6) Experience with power distribution, lighting, switching, sizing and routing.
7) Familiarity in mechanical system design; to include pneumatic supply, oxygen, water & drain, HVAC and pressure control is preferred.
8) Familiarity with aircraft STC procedures preferred.

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Thirteen (13) yrs specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Works on engineering projects containing critical problems, the solution of which requires major technological advances and extensive related development

Principle Duties and Responsibilities:
Essential Functions: 1. Responsible for an entire engineering project of major complexity within established scope 2. Makes technical decisions and recommendations that are recognized as authoritative and have an important impact on extensive engineering activities 3. Applies advanced technical principles, theories and concepts based on broad expertise or unique specialized knowledge 4. Leads the development of innovative principles and ideas 5. Acts independently to determine improved methods and/or procedures to optimize technical product, cost and schedule requirements 6. Works under consultative direction; uses independent judgment to accomplish objectives 7. Develops standards and guides for diverse engineering activities 8. Conceives and plans investigation of broad areas of importance for which engineering precedents are lacking in areas critical to the program Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering or related curriculum preferred
The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 10108
Job Location: Savannah, GA
Rate: $68.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/13/2018
Last Updated: 01/18/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
1) AutoCad required, Catia V5and CHS preferred
2) GV,GVI, and GVII electrical system design experience preferred.
3) 14 CFR 25 Subpart H - EWIS experience preferred
4) Part 25 Certification Experience for Cabin Interiors preferred
5) Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
6) Experience with power distribution, lighting, switching, sizing and routing.
7) Familiarity in mechanical system design
8) Familiarity with aircraft STC procedures preferred.
9) Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred
The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 9857
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 09/24/2018
Last Updated: 01/11/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer - 1 Contract Position - 1 Direct Position

Description:
Duties
Including, but not limited to, the following:
Generate Test Procedures and Reports
Develop pre‐defined designs
Use prescribed methods to develop solutions which impact functions or products within the Engineering Department
Use design initiative to develop solutions which impact specific areas of functions outside of the Engineering Department


Education
Bachelor of Science (BS) OR Master of Science (MS) in applicable engineering discipline from an accredited four‐year university
Equivalent experience which may substitute for education requirements: 14 to 16 total years of direct, applicable experience

Other Experience & Expertise
Specific experience with Garman G1000 avionic system
Familiarity with FAR Part 23
CAD Familiarity; Advanced skills with Siemen’s NX CAD software preferred


Authority and Responsibility
Successful with little to no supervision



Design Engineer III
Design Engineer: Design engineers design the parts, assemblies, and installations which ultimately become products. Core competencies for design engineering are: aeronautical, electrical, and mechanical. At a minimum, Design Engineers should hold a Bachelor of Science in an applicable engineering field.

Duties
Including, but not limited to, the following:
Generate Test Procedures and Reports
Develop pre-defined designs which have minimal impact to Federal Aviation Regulations (FAR) compliance
Use prescribed methods to develop solutions which impact specific areas of FAR compliance
Use design initiative to develop solutions which impact specific areas of FAR compliance and which require cross-functional coordination.


Education
Bachelor of Science (BS) OR Master of Science (MS) in applicable engineering discipline from an accredited four‐year university
Equivalent experience which may substitute for education requirements: 14 to 16 total years of direct, applicable experience

Other Experience & Expertise
Familiarity with FAR Part 23; thorough knowledge of specific areas of FAR Part 23
CAD Familiarity; Advanced skills with Siemen’s NX CAD software preferred.

The Structures Company is an AA/EOE.
 
Job Number: 255
Job Location: ID
Rate: $70-$85/HR - $100-$120K - **DOE**
Per Diem: Yes
Duration: 12 Months
Start Date: ASAP
Input Date: 01/17/2019
Last Updated: 01/24/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer 4

Description:
Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Unique Skills:
•AutoCAD required, Catia V5and CHS preferred
•Experience with power distribution, lighting, switching, sizing and routing.
•Familiarity in mechanical system design
•Familiarity with aircraft STC procedures preferred. 9GV,GVI, and GVII electrical system design experience preferred.
•14 CFR 25 Subpart H - EWIS experience preferred
•Part 25 Certification Experience for Cabin Interiors preferred
•Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
•Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required

Education and Experience Requirements:
•Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
•Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors.
•Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Principle Duties and Responsibilities:
•Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
•Is consulted extensively by associates and others as a recognized authority within the field
•Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
•Approach to problem solving balances technical product, cost and schedule
•Works without appreciable direction; work is reviewed from a long-range perspective for desired results
•Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
 
Job Number: 24-288
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: YES
Overtime: YES
Duration: 1 Year plus
Start Date: ASAP
Input Date: 01/03/2019
Last Updated: 01/14/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer 5

Description:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services

1) AutoCAD required, Catia V5and CHS preferred
2) Electrical system design experience preferred
3) 14 CFR 25 Subpart H - EWIS experience preferred
4) Part 25 Certification Experience for Cabin Interiors preferred
5) Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
6) Experience with power distribution, lighting, switching, sizing and routing.
7) Familiarity in mechanical system design
8) Familiarity with aircraft STC procedures preferred.
9) Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required
 
Job Number: 24-311
Job Location: Savannah, GA
Rate: $68/hr
Per Diem: YES
Overtime: YES
Duration: 1 Year plus
Start Date: ASAP
Input Date: 01/03/2019
Last Updated: 01/30/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Our client is looking for an Electrical Engineer in Slidell, Louisiana! Apply today if you have the skills!

The ideal candidate for this position will perform the following tasks:
* Under general supervision and technical guidance, performs engineering work requiring the independent evaluation, selection and application of standard techniques, conventional procedures and criteria as contained in available Engineering reports, specifications, manuals and handbooks.
* Performs theoretical analysis and mathematical calculations, as the basis for practical application.
* Formulates and writes reports, specifications and procedures required of the assignment.
* Develops details of assignments by making minor adaptations and modifications to current state of the art techniques, based on basic engineering theory and ingenuity.
* Works with breadboards or models.
* Coordinates work of draftsman or technicians assigned to the project.
* Receive and act on instructions as to the general approach, specific assignment objectives, points of emphasis, anticipated difficulties and possible solutions.
* Create Engineering model and drawing using SolidWorks and AutoCAD
* Performs other job-related duties as assigned by management.

Mandatory Qualifications and Experience:
* Bachelor of Science Degree in Electrical Engineering
* 3 plus years of experience of practical engineering experience.
* Must be knowledgeable in 3 or more of the following areas:
- Electrical/Electronics component and system integration and analysis
- Electrical power distribution system design and electrical load analysis
- Electrical circuit design and analysis
- Electromotive components system design and integration
- Electro-mechanical and servo control mechanism design and integration.
- Electrical/Electronic instrumentation and data acquisition.
- Experience in electrical engineering skills in a lab environment

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 129221
Job Location: New Orleans, LA
Start Date: ASAP
Input Date: 01/09/2019
Last Updated: 01/28/2019
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Controls Design

Description:
Electrical Engineer - Controls Design
CLEARANCE REQUIRED
5-10 years of Controls Experience
Machine Design familiarity/experience
Energetics knowledge/experience// Please do NOT submit resumes with less than 2 years of Controls experience. Also, avoid submitting power grid system specific resumes.//
**ROLE AND RESPONSIBILITIES**
• Development of product designs for new and existing equipment.
• Develop Bill of Materials for applications.
• Develop documentation and schematics as required for timely completion of projects.
• Review drawings of other Electrical Engineers and Electrical Designers.
• Create product functional specifications, equipment manuals and training manuals.
• Design/engineer pneumatic systems to meet application requirements.
• Work with Sales, engineers, and potential customers to determine optimal solutions for automating their applications.
• Prepare equipment line integration proposals and sales quotation data.
• Create/develop improvement ideas to make engineering team and company more efficient.
• Develop and modify Rockwell PLC and HMI programs.
• Learn and implement new pieces of electrical equipment in PHC design.
• Develop line controls, motion profiles, etc. to maximize efficiency, throughput, safety and quality for our customers.
• Develop, test and implement software for various systems and equipment.
• Provide electrical installation supervision, commissioning, and equipment start-up in the field at the customer’s site.
• Identify, understand and troubleshoot mechanical issues.
• Train customers to use and maintain systems.
• Act as a project’s point of contact for the customer while working onsite.//**
QUALIFICATIONS AND EDUCATION REQUIREMENTS
• Bachelor’s Degree in Electrical Engineering, or equivalent
• Minimum of five years of successful experience in the development and implementation of automation, electrical design, programming, schematics, control system integration, repair and analysis of electrical applications of automated machinery, product/material handling equipment, packaging and conveyor systems.
• Willingness to learn and implement new equipment/components in both an electrical design and programming capacity.//
PREFERRED SKILLS
•Experience with:
• AC & DC motor drives
• Rockwell Software
• Allen Bradley components
• PLC Programming
• Servo Motion Control
• Vision Systems
• Pneumatics
• Safety PLCs and Controllers
• Basic AutoCAD schematic drawing or electrical package experience
• Proficient in MS Office products
• Knowledge of industry codes and standards
• Ability to rapidly diagnosis, troubleshoot, and debug problems in automated systems
• Ability to work individually and as part of a team
• Results oriented and innovative
• Strong analytical, problem solving and troubleshooting skills
• Ability to work well under pressure and with deadlines
• Ability to visualize a process or system from concept to development
• Strong planning, organizational and decision making skills
• Effective communication and interpersonal skills to interact with customers
• Ability to travel
• Good references with excellent work attendance and attitude.
 
Job Location: Independence, MO
Rate: 54.00
Per Diem: N/A
Overtime: Yes
Duration: 6 mons
Start Date: asap
Input Date: 12/20/2018
Last Updated: 01/14/2019
Firm Name: MIDCOM CORPORATION
Attention: David Reifman
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Level 3

Description:
Electrical Engineer - Level 3

Palm Beach, FL
$37/hr - $45/hr
9 month W2 contract
First Shift
*MUST BE A U.S. CITIZEN*

Description
-Detail oriented Electrical Engineer with 3-5 years experience in circuit design, analysis and implementation.
Experience with component selection and aligning decisions with program requirements to build a quality and affordable product.
-Experience with battery system implementation in systems.
-Role will require engineer to redline drawings and the creation of test procedures.
-AutoCAD skill desired.
-MatLab Skill desired.
-The engineer shall work under the direction of a design lead; ability to take direction and have strong communication skills.
-Desired but not required experience with underwater vehicle development.
-Experience with Power/Energy systems.
-Experience debugging electrical/mechanical assemblies and developing design correction plan.

-Bachelors degree required

Candidate Questions:
years experience with: AutoCAD
years experience with: MatLab
years experience with: Battery System Implementation - Power and energy analysis
years experience with: Circuit Design/Analyis (1+ years required)
 
Job Number: 10264
Job Location: Palm Beach, FL
Rate: 37-45
Per Diem: Split Possible
Overtime: Possible
Duration: 9 mos
Start Date: ASAP
Input Date: 01/10/2019
Last Updated: 01/15/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer IL

Description:
Request number: 5773
Job title: Electrical Engineer
Number of openings: 1
Position location: Northbrook - IL
Employment type: Contract
OT exempt: No

Shift: 1st
Education Requirement: BS/BA

Driving on company time?: No
Maximum Hourly Pay Rate: 45
Start Date: 01/07/2019

Function:
The functional expertise required for this contract Engineering Position is primarily in the field of electrical/electronics/software Engineering with significant experience required in building LABVIEW based test jigs and automated test systems.


The contract Engineer is a primary motivator and contributor to the analysis, conceptual design modification, modification, and testing of automated test system for MPT series of products.


To achieve the position of contract Engineer, an individual will have a BS degree in Engineering with experience in building automated test systems for electromechanical, electro pneumatic servomechanisms and communication systems. In addition, he/she must have a proven record of successful development ATE working as individual or a part of the team. He/she must have a proven record of hands-on working with electrical circuits and wiring and should be able to build prototype boards, cables and harnesses.

Essential job functions:
1. Learning and familiarizing with existing application and product line (2 weeks)

2. Update existing Labview software for issues observed with existing products. Going through each communication command-response and adding missing parameters if any. (3 weeks)

3. Fix the issue of Excel specification spreadsheet from multiple users. Also bring the specification spreadsheet under engineering control environment in vault. ( few hrs)

4. Add drop-down customer list. Add feature to retrieve settings from customer specific EXCEL spreadsheets in vault and program the unit under test. (1 week)

5. Add new parameters to report. Most of them are already measured and needed to add to report. (few hrs)

6. Update existing Labview software to include newer products. Same communication protocol but extended command/responses. (8 weeks)

7. Convert existing Labview software for MPT to perform automatic Design validation test. More in detail then software generated after STEP 6 (4 weeks)

8. Convert existing Labview software for automatic board testing at board house. (6 weeks)

Minimum Qualifications:
Bachelor’s degree (B.S.) in Electrical Engineering from an accredited university and at least 3 years of relevant work experience

• Excellent organizational, project management, troubleshooting & technical problem solving skills
• Must be able to adapt to rapidly changing environment
• Able to travel to customer sites, as required, to support sales and account management efforts
• Strong computer knowledge, including Microsoft Office, Minitab and engineering software including but not limited to SPICE
• Ability to work independently and in a collaborative team environment
• Effective communication skills with all levels of technical and operating personnel, both internal and external, via in person, phone and email
• Must be willing and able to exercise inventiveness and independent judgment
• Objects weighing up to 10 pounds are worked with, manipulated and lifted on a repeated basis.
• Objects with small / complex design are worked with, manipulated and lifted on a repeated basis.
• Electronics and or mechanical assembly medical device industry experience
• The ability to rapidly acquire detailed knowledge of the specific systems used at MCG
• Familiar with and experience with EN60601-1 electrical safety requirements
• Ability to develop and implement new manufacturing methods and processes
• Able to succeed in highly regulated compliance oriented environment while still providing service excellence

Preferred Qualifications:
• Bachelor’s degree (B.S.) in Electrical Engineering from an accredited university and at least 5 years of relevant work experience
 
Job Number: MB-5773
Job Location: Northbrook, IL
Rate: 45/hr max
Per Diem: no
Duration: 5 months
Input Date: 12/19/2018
Last Updated: 01/16/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Manufacturing Engineer

Description:
The ideal candidate will manage a large team or multiple projects in design and planning of layout for assembly and materials handling. You will: •adapt machines or equipment design to factory and production conditions.
•plan sequence of operations and specification procedures for the fabrication of tools and equipment and other functions that affect product performance.
Bachelor's degree is required.
Will consider candidates with a minimum of 5 years of experience as Manufacturing Engineer.
Must have excellent verbal and written skills, technical writing documentation skills.

The ideal candidate will be creative, energetic, flexible, possess a positive attitude and be eager to apply and expand their engineering skills in a highly ethical manner while supporting the Integrated Product Development Team model in which he or she will have overall accountability to ensure products are manufactured to meet engineering requirements, program budgets, and program schedules through performing the following specific activities:
•Mentor Manufacturing Engineering Associates on instilling a Design to Cost mind-set and work to streamline the delivery of manufacturing assembly documentation as well as its use by lab personnel.
•Develop the specific methods and instructions for manufacture and/or assembly of products.
•Determine manufacturing feasibility to: •Identify potential fabrication problems,
•Draw attention to special fabrication requirements and
•Ensure the latest developments in manufacturing technology are considered in the design phase.
•Establish design inherent cost targets which reflect hardware target cost.

The Manufacturing Engineer works with the design team to:
•ensure that the proposed design is within the allowable cost.
•participate in cost proposals by estimating Manufacturing Engineering tasks, tooling costs and developing manufacturing plans.
•establish touch labor cost targets on shop/lab activities as requested.
•define tool and gauge requirements.
•provide the necessary input and support to the tool design group.
•ensure adequate tools and gages are available when needed in the process.
•work with the Manufacturing Control Planner to establish the schedule for all Manufacturing Engineering and Assembly efforts.
•provide support to all activities during the fabrication of the initial unit (first article) of each specific design to resolve processing problems.
•review and implement engineering changes to determine feasibility, producibility and delta cost impact.
•determine, implement and lead process improvement opportunities, business unit initiatives and corrective actions.
•lead efforts to understand non-conformances and reduce Cost of Poor Quality.
•lead 3P events, Value Stream Mapping events, and the implementation of Process Certification.

Education / Certifications
•BS in Mechanical Engineering, Manufacturing Engineering, Industrial Engineering or a Technology Degree.
•10- 15 years of experience required.

Experience/Qualifications
•Experience in determining manufacturing methods and writing manufacturing assembly documentation in order to assemble high quality, highly engineered hardware.
•Background courses in electrical design and/or manufacturing are desired.
•Knowledge of Lean Manufacturing and special processing, such as IPC-J-STD-001E/ES, NASA-STD-8739.1, and NASA-STD-8739.4, is desirable.
•Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable.
 
Job Number: 1810096291
Job Location: Windsor Locks, CT
Duration: 1 year
Start Date: ASAP
Input Date: 01/03/2019
Last Updated: 01/16/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Manufacturing Engineer

Description:
Location: Windsor Locks, CT
Rate: $48.50/HR
Duration: 1 year contract
Per Diem Split: No

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****

Job Description:
- Manages large team or multiple projects in design and planning of layout for assembly and materials handling.
- Adaptation of machine or equipment design to factory and production conditions.
- Planning of sequence of operations and specification procedures for the fabrication of tools and equipment and other functions that affect product performance.

The ideal candidate will be creative, energetic, flexible, possess a positive attitude and be eager to apply and expand their engineering skills in a highly ethical manner while supporting the Integrated Product Development Team model in which he or she will have overall accountability to ensure products are manufactured to meet engineering requirements, program budgets, and program schedules through performing the following specific activities:
- Mentor Manufacturing Engineering associates on instilling a Design to Cost mind-set and work to stream line the delivery of manufacturing assembly documentation as well as its use by our lab personnel.
- Develop the specific methods and instructions for manufacture and/or assembly of products.

Determine manufacturing feasibility to:
- Identify potential fabrication problems, Draw attention to special fabrication requirements and Ensure the latest developments in manufacturing technology are considered in the design phase.
- Establish design inherent cost targets which reflect hardware target cost.

- The Manufacturing Engineer works with the design team to insure that the proposed design is within the allowable cost.
- Participate in cost proposals by estimating Manufacturing Engineering tasks, tooling costs and developing manufacturing plans.
- Establish touch labor cost targets on shop/lab activities as requested.
- Define tool and gage requirements.
- Provide the necessary input and support to the tool design group.
- Ensure adequate tools and gages are available when needed in the process.
- Work with the Manufacturing Control Planner to establish the schedule for all Manufacturing Engineering and Assembly efforts.
- Provide support to all activities during the fabrication of the initial unit (first article) of each specific design to resolve processing problems.
- Review and implement engineering changes to determine feasibility, producibility and delta cost impact.
- Determine, implement and lead process improvement opportunities, business unit initiatives and corrective actions.
- Lead efforts to understand non-conformances and reduce Cost of Poor Quality.
- Lead 3P events, Value Stream Mapping events, and the implementation of Process Certification.

Education / Certifications:
- BS in Mechanical Engineering, Manufacturing Engineering, Industrial Engineering or a Technology Degree.
- 10- 15 years of experience required.

Experience/Qualifications:
- Experience in determining manufacturing methods and writing manufacturing assembly documentation in order to assemble high quality, highly engineered hardware.
- Background courses in electrical design and/or manufacturing are desired.
- Knowledge of Lean Manufacturing and special processing, such as IPC-J-STD-001E/ES, NASA-STD-8739.1, and NASA-STD-8739.4, is desirable.
- Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable.
- Must have excellent verbal and written skills, technical writing documentation skills.
 
Job Number: 10211
Job Location: Windsor Locks, CT
Rate: $48.50/HR
Per Diem: No
Duration: 1 yr
Input Date: 12/18/2018
Last Updated: 01/28/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Power Generation and Distribution Engineer

Description:
• Electrical Power Generation and Distribution Engineer will be responsible for developing the subsystems requirements, architectures, roadmaps, and overall development of the subsystem from concept through certification.
• The candidate must be a subject matter expert in the relevant subsystem and have a thorough technical understanding of development of the subsystem.
• The candidate will be knowledgeable of FAR 25 certification requirements for the subsystem and subsystem components.
• Electrical Power Generation and Distribution Engineer will be responsible for the design of the relevant subsystems of the AS2 supersonic business jet to meet market and certification requirements.
• The successful candidate will have a commanding and fundamental understanding of how to design, analyze, and certify the relevant subsystem and have expert level knowledge of system integration into the aircraft.
• The candidate should be regarded as the technical subject matter expert for the relevant subsystem.

Basic Qualifications:
• BS degree or higher in mechanical/aerospace engineering.
• Minimum of seven years senior level technical experience in Electrical Power Generation and Distribution design and certification required.
• Experience with design and certification of FAR 23 or FAR 25 subsystems required.
• Strong technical, interpersonal, communication, administrative, and presentation skills. Demonstrated leadership in solving technical challenges.
• Significant experience on aircraft design teams, from concept through certification, in a collaborative multi-discipline team environment.
 
Job Number: 42-007
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 01/03/2019
Last Updated: 03/18/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Engineer

Description:
Electrical Engineer-Direct Hire



Burlington Area

Base Salary 110k-130k 

 

  • Provide technical leadership and serve as a leading individual contributor to the concept, design, development, and test of system modules and integration, including electro-mechanical and electro-optical interfaces

  • Test, evaluate, troubleshoot and diagnose electronic and electro-mechanical issues

  • Coordinate development activity with consultants and outside organizations as necessary

  • Meet project schedules and product specifications

  • Identify/specify parts, components, and assemblies

  • Work with key suppliers to ensure on-time delivery of critical components

  • Design critical control elements for high-precision optical systems

  • Regular reviews project updates and reviews

  • Operate within a cross functional team, understand the needs and requirements of internal stakeholders as well as external customers

  • Prepare and chair design reviews


Qualifications


  • A Bachelor’s degree or higher in electrical engineering or well-related field

  • Demonstrated ability to conceive, design, and produce precision control systems of varying degrees of complexity

  • Solid knowledge and understanding of analytical investigations of electrical/electronic/motion-control equipment, including diagnostic troubleshooting, motion analysis, timing diagrams for interacting components

  • Working knowledge of position sensing and optical measuring components

  • Simulation experience (e.g., SPICE, MATLAB)

  • Solid ability to use test equipment (oscilloscopes, voltage probes, waveform generators, gauss meters, etc.)

  • Experience working with and selecting linear motors and related supporting components

  • An understanding of magnetic field interactions with solids and the potential for material heating and drag

  • Experience working with and directing a collaborative, cross-functional team development effort

  • Experience working with and managing suppliers of critical parts and components

  • A working knowledge of C/C++ and Linux OS a plus

  • Knowledge of and experience in light sources, optical sensors, and sensor fusion is a plus

  • Experience in the semiconductor capital equipment industry and familiarity with UL, CE, SEMI, and RoHS standards is a major plus.

  • Helicopter view, identify and understand priorities and main risks

  • Highly pro-active, thinks ahead, reports issues and setbacks promptly

  • Team player on all levels

  • Excellent communication and interpersonal skills


Relocation assistence is not available for this position
 
Job Number: 18-51999
Job Location: North Reading, MA
Rate: 128000.0USD/Year
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-01-02 00:00:00.0
Input Date: 12/12/2018
Last Updated: 02/20/2019
Firm Name: NESCO RESOURCE
Attention: Kyle Hughes
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

Electro/Mechanical Design Engineer

Description:
-Designer will use Computer Aided Design (CAD) systems to prepare mechanical design layouts, detail and assembly drawings and models (including but not limited to packaging, mechanisms, and castings)
-Electrical/mechanical packaging, harnessing, structures, cabling, surfacing and mechanisms
-Technical knowledge sufficient to perform complex tasks such as preparation of all types of detail drawings, large assemblies, castings or other performs, interface drawings, various layouts for design
-Advanced experience of CREO Parametric (Pro/Engineer) solid modeling CAD tool and considerable knowledge of Windchill data management (PDM) tool . GD&T
 
Job Number: 0878
Job Location: Multiple
Rate: 50-80/hr
Per Diem: YES
Overtime: Possible
Duration: 6-12 months plus
Start Date: 2/3 wks
Input Date: 05/29/2018
Last Updated: 01/20/2020
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: davellino@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electromechanical Technician / no clearance CA

Description:
163555
Electromechanical Technicians (Job Number: 18023262)

Number of Openings: 6

Location(s): United States-California-Redondo Beach


Shift: 1st Shift

Target Start Date: Nov 12, 2018

Target End Date: Nov 1, 2019

Targets: 6**

Work Week: 9/80

Location: Redondo Beach, CA

Pay rate: $27.00 - $32.00

Duration of Assignment: Up to 1 year

Clearance: None


PRIMARY DUTIES AND RESPONSIBILITIES:
Under close supervision, performs routine technical functions related to the support of development engineering activities such as design, test, checkout, fabrication, modification, and assembly of electronics and Electro-mechanical systems, experimental design circuitry, prototype models or specialized test equipment. Applications may include analog, digital and/or video type circuits and logic systems. Guidance is readily available from superiors. Works from schematics, diagrams, written and verbal descriptions, layouts or defined plans to perform routine testing, checkout, troubleshooting, prototype building, environmental testing, and simple developmental engineering tasks. Performs routine operational tests and fault isolation on development systems and equipment to ensure conformance with design specifications. Diagnoses and isolates malfunctions down to component level. Conducts defined engineering tests and collects data as assigned. Utilizes routine development or diagnostic equipment including oscilloscope, VOM, DVM, signal generators and similar test apparatus. Normally assigned in area such as development, engineering, test equipment design, or the like. Excludes those assigned to production test activities. Entry Level. Excludes trainees with no academic preparation or experience.

EXPERIENCE and TRAINING:
Electronics training equivalent to 2 years technical trade school or military technical school.


Basic Qualifications:

High School diploma or equivalent and 2 years additional education and/or related experience.


Preferred Qualifications:

2 years military or applicable experience is preferred
 
Job Number: MB-1695
Job Location: Redondo Beach, CA
Rate: 32/hr max
Per Diem: no
Duration: 1 year
Input Date: 12/12/2018
Last Updated: 01/21/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic Packaging Design Engineer

Description:
Mentor Expedition Printed Circuit Board (PCB) Designer-
The PCB Designer will create printed circuit board layouts from inputs received from engineering (electrical, mechanical, manufacturing, and test).
Job duties will include but are not limited to the following:

• Place and route components ensuring that all electrical and physical attributes meet the specific design requirements for each PCB design.
• Ensure that all requirements for manufacturing and assembly are met.
• Rework PCB designs when engineering design changes occur and assist the design team with ideas to resolve issues.
• Make schematic updates based upon changes from electrical engineers.

Qualifications:
• 5+ years of experience using Mentor Graphics Xpedition, Designer VX2.3 (schematic capture) and Layout VX2.3 (board layout), software to route complex multi-layer printed circuit board designs.
• An Associate’s Degree or certificate in Graphics Technology or Engineering Technology is desired.
Must be proficient with:
• Verifying design using Design Rule Check.
• Using Padstacks, Cell (footprint) and Part (PDB) definitions, and building intelligence into components.
• Utilizing Constraint Manager to define substrate and routing constraints.
• Establishing rule areas that define specific route rules for different portions of the board.
• Routing using both manual/interactive and automatic tools.
• Working with different via structures.
• Generating plane data.
 
Job Number: EPDE2018
Job Location: El Segundo, CA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6 mon
Start Date: ASAP
Input Date: 02/12/2019
Last Updated: 02/22/2019
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Shailendra Mishra
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronics Design and Analysis Engr 5- PCB Designer in El Segundo, CA

Description:
Electronics Design and Analysis Engr 5- PCB Designer

Location: El Segundo, CA
Duration: 12+ Months

Job Description:
Mentor Expedition Printed Circuit Board (PCB) Designer
The PCB Designer will create printed circuit board layouts from inputs received from engineering (electrical, mechanical, manufacturing, and test).
Job duties will include but are not limited to the following: Place and route components ensuring that all electrical and physical attributes meet the specific design requirements for each PCB design.
Ensure that all requirements for manufacturing and assembly are met.
Rework PCB designs when engineering design changes occur and assist the design team with ideas to resolve issues.
Make schematic updates based upon changes from electrical engineers.

Qualifications:
• 5+ years of experience using Mentor Graphics Xpedition, Designer VX2.3 (schematic capture) and Layout VX2.3 (board layout), software to route complex multi-layer printed circuit board designs.
• Associates Degree or certificate in Graphics Technology or Engineering Technology is desired.
Must be proficient with:
• Verifying design using Design Rule Check.
• Using Padstacks, Cell (footprint) and Part (PDB) definitions, and building intelligence into components.
• Utilizing Constraint Manager to define substrate and routing constraints.
• Establishing rule areas that define specific route rules for different portions of the board.
• Routing using both manual/interactive and automatic tools.
• Working with different via structures.
• Generating plane data.

Skill Code: 624-Electronic Packaging Design
 
Job Location: El Segundo, CA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 months
Start Date: Asap
Input Date: 01/02/2019
Last Updated: 05/09/2019
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronics Technician / Must have hand soldering experience. Cable harness fabrication and bench work experience preferred TX

Description:
163437
1219-1 Electronics Technician
Work Location: Fort Worth, TX
Status: Open

Qty: 2
Desired Start Date: 1/29/2019
End Date: 7/29/2019

Job Description:
Consist of engineering hardware fabrication support, troubleshooting, testing and basic Laboratory operations responsibility. Some climbing on ladders may be required as well as lifting up to 25 lbs. These responsibilities will include fabrication of electronic/electrical chassis and mechanical rack fabrication using development engineering drawings. Candidate must be capable of working independently, discussing technical issues with customers and working with vendors. An AA in Electrical or Electronics Engineering is highly preferred. Extensive hand soldering experience mandatory.

**Must have hand soldering experience. Cable harness fabrication and bench work experience preferred.

Region: Fort Worth, TX
Level: Level 2: 3+ YRS
Pay Rate: $33.00 Hourly
 
Job Number: JE-1219-1
Job Location: Fort Worth, TX
Rate: 33/hr max
Per Diem: no
Duration: 6 months
Input Date: 01/15/2019
Last Updated: 01/16/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrophysics Engineer IV - Electromagnetic Compatibility - (OK)

Description:
Several openings in Oklahoma City, OK.

Active Secret Clearance, NOT required to start.

Develops and validates requirements for various complex communication, sensor, electronic warfare and other electromagnetic systems and components. Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures. Develops architectures to integrate complex systems and components into higher level systems and platforms. Performs complicated trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around established requirements. Defines and conducts critical tests of various kinds to validate performance of designs to requirements. Manages appropriate aspects of critical supplier and partner performance to ensure compliance to requirements. Provides support to products throughout their lifecycle from manufacturing to customer use by providing guidance and support to resolve complex issues. Supports project management by providing coordinating development of work statement, budget, schedule and other required inputs and conducting appropriate reviews. Generates major sections of proposals to support development of new business.

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
 
Job Number: ElectroPhysicsOK
Job Location: Oklahoma City, OK
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 10/16/2018
Last Updated: 01/25/2019
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Mechanical 3 / Catia V5 / Solidworks / electromechanical / material packaging - Clearance CA

Description:
Engineer Mechanical 3 (Job Number: 18025198)

Number of Openings: 1

Location(s): United States-California-Redondo Beach


Shift: 1st Shift

Target Start Date: Jan 14, 2019

Target End Date: Dec 31, 2019

Pay rate: $52.00

Location: Redondo Beach, CA

Duration of assignment: Up to 1 year

Work schedule: 9/80


Researches, plans, designs and develops mechanical products and systems such as instruments, controls, robots, engines, machines and mechanical, thermal hydraulic or heat transfer systems for production, transmission, measurement, and use of energy. Applies research to the planning, design, development, and testing of mechanical and/or electromechanical systems, instruments, controls, engines, and/or machines.

Basic Qualifications:
5 Years with Bachelors in Science; 3 Years with Masters; 0 Years with PhD.


Preferred Qualifications:
•5-10 years mechanical or design engineering experience
•Managing large projects
•2-5 years drawing experience (CATIA & Solidworks) is required
•Bachelor's Science degree in a STEM (Science, Technology, Engineering, Math) field
•Leadership experience
•Proficiency in packaging or material handling design
 
Job Number: MB-1713S
Job Location: Redondo Beach, CA
Rate: 52/hr max
Per Diem: no
Duration: 12 months
Input Date: 01/07/2019
Last Updated: 03/28/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Design Checker III

Description:
Our client is looking for an Engineering Design Checker to work in Grand Prairie, Texas! Apply today with your most recent resume and if you meet the qualifications a recruiter will be in contact with you!

The ideal candidate for this position will perform the following tasks:
* Designs and oversees the plant or manufacturing systems, fabrication, installation, modification, maintenance, and repair of mechanical equipment such as conveyor systems, production machinery, and other material-handling equipment used in fabrication, assembly, and other production functions; analyzes engineering sketches, specifications and related data, and drawings to determine design factors such as size, shape, and arrangement of parts; oversees the construction of machine and subassemblies considering such specifications as gear ratios, bearing loads, and direction of moving parts; compiles and analyzes test data to determine effect of design on machines in relation to factors such as temperature, pressures, speed, horsepower, and fuel consumption.
* Researches, plans, designs and develops mechanical products and systems such as instruments, controls, robots, engines, machines and mechanical, thermal hydraulic or heat transfer systems for production, transmission, measurement, and use of energy.
* Applies research to the planning, design, development, and testing of mechanical and/or electromechanical systems, instruments, controls, engines, and/or machines.
* Experienced mechanical drawing checker working under the general supervision of a Lead Checker or Technical Engineer.
* Perform the Checking of design layouts of intermediate complexity, assembly and detail drawings to assure compliance with established Government, Industry and Company standards.
* Performs other related duties and assignments as required.

Mandatory Qualifications and Experience:
* Requires mechanical design engineering background in the areas of structures, materials, processes, fastening and joining, parts selection, tolerance analysis (incl. Geometric Dimensioning and Tolerancing) and manufacturing methods.
* Microsoft Office Word, Excel, PowerPoint and Outlook
* Excellent written and oral communication skills
* Strong organizational skills
* Mechanical Computer Aided Drawing (MCAD) skills

Desired Qualifications and Experience:
* PTC Pro/E skills
* PDM familiarity

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 129518
Job Location: Grand Prairie, TX
Duration: 9 months
Start Date: 01/28/2019
Input Date: 01/09/2019
Last Updated: 01/15/2019
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Manager, Systems Software (749)

Description:
**Must be US Citizen to apply for Secret cleared positions**



CSS Staffing is seeking an Engineering Manager, Systems Software, who has proven experience with a strong systems software development and programmatic background who has experience in managing systems, and software development teams – from project estimation to planning, executing, testing, software release management and QA - for development programs and production support activities across a diverse product portfolio in a matrix organization to achieve operational results. This role includes active management of the systems, software engineering functional group as well as management of cross-functional engineering activities on assigned programs.



Required Skills

*BSEE or related degree in software engineering or computer science

*Proven experience leading engineering teams with five (5) years minimum experience as a supervisor/manger.

*Minimum of Five (5) years’ experience with IA technologies and of their interactions to ensure system performance, including:

Mechanical structures, stiffness, inertia, weight trade-offs

System, motion and dynamics, expected pointing accuracy

Electric motors, performance, torque, construction

Position measurement with resolvers, Inductosyn, measuring tools

System performance calculation, simulation –consumption, vibration, temperature…-

Electronics hardware, noise, emissions

Control loops, reaction speed, performance assessment

Software for control, diagnostic, graphical user interface (Linux/RTOS/Python)

Positioner testing, tuning, qualification, field installation

EMI design, test, remediation

MIL/Rugged environment design, qualification test

*Experience with engineering and quality requirements for defense applications

*Ability to obtain and maintain a secret security clearance



Desired Skills

*Masters’ Degree in Engineering or Management

*Twelve (12) years minimum experience in new product development and engineering-to-production transitions

*8 years’ experience developing hardware requirements to meet higher-level system goals

*8 years’ experience with simulation software such as ModelSIM

*8 years’ experience with Altium Designer for schematic entry

*8 years’ experience with Altera’s Quartus Prime IDE

*8 years’ experience generating product cost estimates and writing proposals

*8 years’ experience with code development processes or of LCM and/or Stage-Gate methodology

*Active secret security clearance highly desired
 
Job Number: 749
Job Location: Exeter, NH
Input Date: 01/10/2019
Last Updated: 01/22/2019
Firm Name: CSS STAFFING
Attention: Shay Rosen
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Project Management-UTMST

Description:
Manage high complexity engineering management and project management for technical process improvement projects. Responsibilities include developing productivity tools, managing documentation, tracking schedules.

Project Engineer to Manage a team and provides direction development, design, and testing of components, for manned space applications. This will included extensive supplier technical management. The successful candidate will be responsible for leading the IPD teams consisting of Systems Engineering, Test Engineering, Mechanical/Electrical Design, Supplier Quality, Materials Engineering, Manufacturing Engineering, Material Planners, and Purchasing to coordinate the manufacture, qualification, and delivery of various Environmental Control and Life Support System (ECLSS) components by working closely with the supply base to drive the design of these components. Familiarity with Earned Value Management System (EVMS), DOORS, SAP, and Engineering Change System are a plus. The IPD team lead will report directly to the Program Engineering Manager and Program Managers, and will play a critical role in driving project execution while meeting both internal and external customer expectations. Detailed coordination with the Program Office will be required in managing the suppliers and the IPD Team. This position requires creation and delivery of technical presentations to management and customers.

*Education / Certifications • BA/BS degree in Science, Technology, or Engineering w/ 5+ years of experience is required - • 4+ years leading teams and managing projects
 
Job Number: 133
Job Location: Windsor, CT
Rate: BOE
Per Diem: NO
Overtime: TBD
Duration: 12 months
Start Date: 01/20/2019
Input Date: 01/03/2019
Firm Name: RCM TECHNOLOGIES INC
Attention: Kelly Krupa
Address: 3 ENTERPRISE DR STE 110
City, State: SHELTON, CT 06484
Phone: 203/225-5700
Fax Phone: 203/377-6298
Website: www.rcmt.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Facilities Engineer

Description:
Location: Vandenberg AFB, CA
Duration: 1 year contract
Overtime: Exempt
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****

Job Description:
- The Facility Maintenance Engineer will support the maintenance and restoration of launch facilities in support of our clients Atlas V Launch Operations at Vandenberg Air Force Base California as part of our clients Engineering and Infrastructure Team.
- The successful candidate will provide management of Delta IV SLC-6 facility maintenance activities, consisting of periodic maintenance and repair of launch facility, HVAC, electrical, civil, structural and mechanical systems.
- Maintenance activities are performed by both contractor and company represented employees.
- Candidate will coordinate the procurement of facility services, equipment, and furniture and perform a variety of engineering tasks in support of mechanical, electrical and structural facility maintenance.
- Candidate will perform investigation of anomalies encountered by maintenance personnel and be responsible for developing a corrective action plans and work documents for both company and contractor support.
- Will work with various government support groups including Air Force and Base Civil Engineering personnel.
- Will specify and order various types of facility equipment.


Requirements:
- Experience with facilities engineering and plant operations.
- Must have excellent communication, writing, and oral skills and have the ability to work with a wide range of team members including company represented personnel, customers, and subcontractors.
- Ability to read and interpret mechanical and electrical drawings, logic diagrams, and technical manuals.
- Basic experience with AutoCAD, create/revise engineering drawings as required.
- Proficient knowledge in Microsoft Office Suite.
- Plans, designs and oversees the reconfiguration, maintenance, and alteration of equipment, machinery, buildings, structures, and other facilities.
- Gathers and reviews data concerning facility or equipment specifications, company or government restrictions, required completion date, and construction feasibility.
- Coordinates with architecture/engineering firms in developing design criteria and preparing layout and detail drawings.
- Prepares bid sheets and contracts for construction and facilities acquisition.
- Reviews and estimates design costs including equipment, installation, labor, materials, preparation, and other related costs. Inspects or directs the inspection of construction and installation progress to ensure conformance to established drawings, specifications, and schedules.


Education:
- Requires a bachelor’s degree and 4 -8 years of experience.
 
Job Number: 9834
Job Location: Lompoc, CA
Per Diem: Split Possible
Overtime: Exempt
Duration: 1 yr
Start Date: ASAP
Input Date: 02/08/2019
Last Updated: 02/21/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
We are seeking Flight Test Engineers to join us in Moses Lake, WA to support an exciting new aircraft project. The ideal candidate in this position will be involved in a range of airplane flight test operations including but not limited to:

•Support engineering with test plan creation.

•Discuss, write and review test cards and test hazard analysis

•Support and/or lead test preparation activities, test execution, post-test activities

•Support and/or lead pre and post flight briefings.

•Monitor live flight data, either via telemetry or onboard flight test aircraft

•Process, analyze, and draw conclusions from post flight data.

•Make assessments to ensure safety of flight determination.

•Document flight test design problems for long term fix.

•Generate and review appropriate restrictions/ limitations documentation.

•Update monitoring screens for specific testing and/or restriction monitoring.






Requirements



•5+ years relevant work experience related to experimental flight test operations.

•Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.

•Strong ability to analyze results

•Communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).

•Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.

•Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related.
 
Job Location: Moses Lake, WA
Start Date: ASAP
Input Date: 12/28/2018
Last Updated: 02/05/2019
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fuel Systems Engineer

Description:
• Responsible for developing the subsystems requirements, architectures, roadmaps, and overall development of the subsystem from concept through certification.
• The candidate must be a subject matter expert in the relevant subsystem and have a thorough technical understanding of development of the subsystem.
• The candidate will be knowledgeable of FAR 25 certification requirements for the subsystem and subsystem components.
• Fuel Systems Engineer will be responsible for the design of the relevant subsystems of the AS2 supersonic business jet to meet market and certification requirements.
• The successful candidate will have a commanding and fundamental understanding of how to design, analyze, and certify the relevant subsystem and have expert level knowledge of system integration into the aircraft.
• The candidate should be regarded as the technical subject matter expert for the relevant subsystem.

Basic Qualifications:
• BS degree or higher in mechanical/aerospace engineering.
• Minimum of seven years senior level technical experience in Fuel Systems design and certification required.
• Experience with design and certification of FAR 23 or FAR 25 subsystems required.
• Strong technical, interpersonal, communication, administrative, and presentation skills. Demonstrated leadership in solving technical challenges.
• Significant experience on aircraft design teams, from concept through certification, in a collaborative multi-discipline team environment.
 
Job Number: 42-008
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 07/15/2019
Last Updated: 07/22/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Hardware Engineer

Description:
Must Be Eligible for a Clearance

Performing Hardware Board design activities for various programs and IRAD projects -Design and develops Printed Circuit Boards -Generates documents using tools for schematic
The designs are dense, high-speed, multi-layer boards.
Working with Hardware Engineering Team to complete Hardware Development -Understand and develop with the engineering team on material selection, impedance calculations, high speed design, cross talk limits, differential pairs, PCB stack-ups, PCB via structures, etc. during the design phase, and generate and perform reviews on the artwork and drawings once the design is ready for fabrication and assembly.
Interface with Mechanical engineers, Suppliers, Component Engineering, Program Managers and Project team members as needed to develop cost effective high quality design. Supporting IPT teams, EPM and Program Office staff to meet all customer objectives and program milestones.
 
Job Location: NY
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 01/08/2019
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Hardware Engineer III

Description:
Our client is looking for a level 3 Hardware Engineer to work in Owego, New York! Apply today with your most recent resume and if you meet the qualifications a recruiter will be in contact with you!

The ideal candidate for this position will perform the following tasks:
* Performing Hardware Board design activities for various programs and IRAD projects
* Design and develops Printed Circuit Boards -Generates documents using tools for schematic; The designs are dense, high-speed, multi-layer boards.
* Working with Hardware Engineering Team to complete Hardware Development
* Understand and develop with the engineering team on material selection, impedance calculations, high speed design, cross talk limits, differential pairs, PCB stack-ups, PCB via structures, etc. during the design phase, and generate and perform reviews on the artwork and drawings once the design is ready for fabrication and assembly.
* Interface with Mechanical engineers, Suppliers, Component Engineering, Program Managers and Project team members as needed to develop cost effective high quality design.
* Supporting IPT teams, EPM and Program Office staff to meet all customer objectives and program milestones.

Mandatory Qualifications and Experience:
* Digital Board Design experience.
* 3+ years of experience with Printed Circuit Board design
* Knowledge of Zuken design tool
* Digital Signal Processing knowledge
* Computer Engineering/ Electrical Engineering
* Expertise High density PCB design that includes Power, Digital, and Analog layouts

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 129537
Job Location: Owego, NY
Duration: 6 months
Start Date: 02/04/2019
Input Date: 01/09/2019
Last Updated: 01/23/2019
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Hydraulics Subsystem Lead Engineer

Description:
Seeking an Hydraulics Subsystem Lead Engineer with strong experience enabling him/her to be responsible for all activities related to the design, development, integration, testing and certification of the Hydraulics system for the a supersonic business jet. The successful candidate will manage the hydraulics systems design and completion partners, as well as all design and certification activity required. The Hydraulics Subsystem Lead Engineer will report to the Director of Subsystems IPT.

Duties include, but are not limited to:
• Develop hydraulics systems design, architecture and product plan, including qualification and certification plans.
• Provide subject matter expert level technical leadership, mentoring and guidance on both practical and theoretical aspects of hydraulics systems
• Define requirements for the hydraulics systems to ensure compliance with regulations and customer requirements
• Provide validation and verification of hydraulics systems requirements
• Perform hydraulics systems tests and certification, and provide system and certification documentation
• Manage the Hydraulics subsystem scheduling, budget, resources and suppliers
• Will be responsible for hiring, developing and leading talent to augment and seamlessly integrate with our world-class team and liaise effectively with our technical support partners.
• The selected candidate will help to define the product development strategy and lead a team of engineers and analysts in that effort. She/he will prioritize the allocation of the Hydraulics subsystem resources to meet the milestones of the program schedule, from concept through certification.

Requirements:
• Must be either a US citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772 and ITAR 120.12.
• Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure / confidentiality agreement with current or former employer that would prevent you from performing the duties of the position.
• Minimum of a Bachelor’s Degree in Aerospace, Mechanical Engineering or other relevant Engineering position.
• Master’s degree in a technical and/or management specialty preferred.
• 10+ years of deep, hands-on experience in Hydraulic systems development, design and testing in Military, Commercial and/or business jet aircraft.
• 3+ years of demonstrated experience leading technical resources and teams, both internally and externally, as well as both on-site and off-site.
• In-depth and current knowledge of Part 25 regulatory requirements.
• Experience and expertise in the development of commercial and/or high-end business jets strongly desired.
• Recent experience in developing hydraulic systems from concept through certification strongly desired.
 
Job Number: 42-002
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: Possible
Duration: 1 year plus
Start Date: ASAP
Input Date: 07/15/2019
Last Updated: 07/22/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
INDUSTRIAL SYSTEMS PROJECT ENGINEERING MANAGER-MACHINE SYSTEMS

Description:
JSG is hiring a Industrial Systems Project Engineering Manager for our client in Los Angeles, CA!

This is not an IT position.
Local candidates only.

Responsibilities

Supervise the project managers, project engineers, and proposal manager in the Industrial Systems organization.
Work with his or her peer, the Industrial Systems Engineering Services Manager, to complete semi-custom and custom automated systems for welding, laser marking, laser processing, and precision laser cutting applications.
The Industrial Systems Project Engineering Department is responsible for successful project completion and will be provided support by the Engineers in the Industrial Systems Engineering Services Department Coordinate department’s activities with the Systems Engineering Services
Manager and Manufacturing Manager as well as coordinate activities with the Company support departments including Purchasing, Product Planning, Customer Service, Finance and Sustaining Engineering
Coach staff toward modern professional performance in the areas of:
Technically robust and advanced equipment
Creative and robust automation solutions
Engineering procedures and disciplines in a commercial environment
Presentation and communication with customers and other departments
Achieve project performance goals on equipment projects, setting and managing customer and Company expectations.
Deliver quality products on time.
Manage development projects that provide new and innovative industrial systems features and capabilities
Oversee and support the quotation activities for systems
Proposal writing and cost estimating
Pre-sale activities include conceptual design, schedule, and cost estimation of semi-automated industrial laser processing workstations.
Conceptual design with assistance from others includes: cycle time estimate, mechanical layout of workstation, tooling concept, block diagram of electronic controls, and flowchart of overall man-machine interaction and machine functions.
Cost estimation includes estimation of NRE, RE, assembly, testing and materials.
Provide administrative management of systems project engineering department, including staffing, performance appraisals, career development,
reporting, and participation in company-wide management and process improvement initiatives
Partner with vendors and other third party concerns to augment systems and execution capacity to match our order demand and to provide added industrial systems features and capabilities

Requirements

Eight years experience in a technical management capacity at an industrial firm.
BS degree in Mechanical or Electrical Engineering
Experience with motion control equipment, industrial machines and automation
Excellent problem solving skills
Good verbal and written communication
Track record of project definition and project completion
Excellent time management skills and follow-though with ability to accomplish day-to-day tasks while continuing to make progress, and bring to completion,longer term projects.
Good verbal and written communication
US Citizen due to customer visit and specification requirements
Ability to occasionally travel domestically and internationally
 
Job Number: 367484
Job Location: LOS ANGELES, CA
Per Diem: No
Overtime: Possible
Duration: DIRECT
Start Date: ASAP
Input Date: 11/06/2018
Last Updated: 02/15/2019
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda J Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
INSTRUMENT AND CONTROLS ENGINEER

Description:
INSTRUMENT AND CONTROLS ENGINEER



Ponca City Refinery:

The Ponca City Refinery in Oklahoma has a crude oil processing capacity of 203 MBPD. Both foreign and domestic crudes are delivered by pipeline from Canada, Oklahoma, Kansas and Texas. The refinery's facilities include fluid catalytic cracking, delayed coking and hydro-desulfurization units that enable it to produce high ratios of gasoline and diesel fuel from crude oil. Finished petroleum products are shipped by truck, rail and Company-owned and common carrier pipelines to markets throughout the mid-continent region. Operations are run 24 hours per day, seven days per week.



Major Products: Gasoline, Diesel, Jet fuel, Kerosene, Heating oils.

Capacities: Crude oil and Other Charge Capacity: 203,000 BPD; Gasoline Production Capacity: 110,000 BPD; Distillate Production Capacity: 85,000 BPD.


 

Description:

The Instrument Engineer is responsible for the design, engineering, and implementation of process instrumentation and control systems from initial conception through commissioning. The Instrument Engineer is responsible for design and engineering that provide the most reliable and cost- effective instrument and control systems. The Instrument Engineer also provides consulting services to process engineers in developing process design specifications, develops operating and training manuals for mechanical and process personnel, and participates in training operating personnel. The Instrument Engineer writes purchase and construction specifications and writes and performs Factory Acceptance Tests procedures. The Instrument Engineer specifies, procures, and configures Distributed Control Systems, and field hardware such as transmitters, control valves, and electronic transmission systems.

 

The Instrument Engineer utilizes American Petroleum Institute (API) Standards, Instrumentation, Systems and Automation Society (ISA) Standards, National Fire Protection Association (NFPA), and ConocoPhillips standards and practices to perform the above functions..

 

Responsibilities may include:



  • Instrumentation and controls capital projects engineering including front-end-loading, cost estimates, specifications and oversight of detailed design.

  • Identifying areas where instrumentation/controls can improve plant operation and profitability

  • Owning and leveraging the application of instrumentation safety standards, mechanical integrity, design, and maintenance.

  • Functioning as Project Engineer on instrumentation and control system capital projects and large instrumentation maintenance projects

  • Using documentation systems and processes which maintain accurate instrumentation equipment and control system information and drawings

  • Supporting criticality assessments of the plant's instrumentation equipment

  • Designing Refinery Safety Instrumented Systems (SIS) design and maintenance

  • Performing Safety Integrity Level (SIL) analysis and engineering upgrades of safety instrumented systems

  • Assisting in developing strategic plans for implementing/upgrading instrumentation and control systems

  • Serving as a technical resource to properly identify new and existing equipment specifications and proper operating parameters/ranges for instrumentation equipment

  • Overseeing application and interpretation of National Electric Code and other applicable city, state, federal codes and standards (e.g. NPRA, NFPA, API, ISA)

  • Performing audits of instrumentation installations and process control loops including failure analysis inspections

  • Interacting with engineering and construction contractors, both on- site and off- site

  • Review instrument changes for Management of Change approval.  Ensure that changes are properly designed and documented.

  • Assist with training and development of operators, technicians, and engineers in order to high-grade skill sets with respect to the instrument asset base.

  • Support DCS operator interfaces with respect to information presentation and abnormal situation management.

  • Facilitate increases in unit availability, increases in product quality, and reductions in refinery maintenance costs by developing and maintaining reliability systems for the plant's instrumentation assets. Provide leadership for implementation of these reliability systems.


QUALIFICATIONS

 

Basic/Required:  



  • Must possess a bachelor's degree in Electrical Engineering, Chemical Engineering, Mechanical Engineering or Engineering Physics or equivalent

  • 3+ years of experience in a refinery and/or chemical industry

  • 3+ years of direct experience in process instrumentation design and/or maintenance.


 

Preferred:  



  • Knowledge of the Ponca City Refinery instrumentation asset base.

  • Proficient in use of SAP - PM & PS Modules

  • Demonstrated knowledge and experience designing and supporting Safety Instrumented Systems (SIS), Safety Instrumented Functions (SIF), Layers of Protection Analysis (LOPA), and High Integrity Pressure Protection Systems (HIPPS).

  • Proficient in computer applications such as Word, Excel, Outlook, and MS Projects

  • Expert knowledge of field instrumentation and controls through design and field installation experience

  • Demonstrated knowledge and experience on Programmable Logic Controllers (PLC) and Distributed Control Systems (DCS), preferably on Client TDC3000 / Experion and FSC Safety Managers.

  • Demonstrated knowledge on Process Analyzers, Chromatographs, and Gas Monitoring Systems.

  • Demonstrated knowledge and use of SPI (InTools) database and specifications

  • Strong analytical skills including statistical analysis

  • Strong interpersonal and written communication skills

  • Ability to lead execution of work and resolve issues in a team environment

  • Accepts ownership, is accountable, and delivers on commitments


Ability to work in cross-functional teams

 


 




Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
 
Job Number: 18-50643
Job Location: Ponca City, OK
Rate: 0.0USD/Hour
Per Diem: --
Overtime: --
Start Date: 2018-12-04 00:00:00.0
Input Date: 12/04/2018
Last Updated: 06/14/2019
Firm Name: NESCO RESOURCE
Attention: Kristy Thompson
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Instrument & Controls Engineer

Description:
Description
• Instrument & controls engineering including front-end planning, I&C quantity and cost estimation, conceptual studies, detailed design, factory acceptance testing (FAT), and construction & commissioning support for EPC projects in Oil & Gas refineries and Chemical industrial facilities. Work in a project team environment under direct supervision of an I&C lead.Burns & McDonnell maintains a strong focus on quality deliverables which are completed on schedule.
• Prepare instruments and control systems specifications, instruments and instrument valves data sheets, RFQs, technical bid summaries, and purchase recommendations.
• Conduct review of instrument and control systems vendor drawings and data. Interface with suppliers, clients, other engineering disciplines, and detailers/designers.
• Participate in the development of P&ID's and equipment/subcontract package specifications.
• Develop logic diagrams, instrument index, I/O list, cause & effects, and control narratives.
• Able to support construction and startup & commission activities in the field, when required\
• *Note - non-local candidates will be considered but per diem/expenses are not offered for this position*

Qualifications
• B.Sc. degree in Electrical, Chemical, or Mechanical engineering with Minimum 7 years of I&C related experience
• EPC project experience is desirable
• Excellent written & verbal communication and interpersonal skills
• Ability to lead analysis and resolution of technical problems
• Must be willing and eligible to obtain or currently hold a valid Transportation Worker Identification Credential (TWIC)
• This position requires an individual capable of taking variety of project assignments and willing to grow professionally
• Previous engineering experience within Oil, Gas, Chemical industry is preferred
• PE license is preferred, ability to get the PE license is required
• 20% travel is required
 
Job Number: 70Z
Job Location: Kansas City, MO
Per Diem: Possible
Overtime: possible
Duration: approx. 6 mo.
Start Date: NOW
Input Date: 01/14/2019
Firm Name: TECHNOLOGY PLUS
Attention: Trudy Pollard
Address: 130 S BEMISTON AVE STE 500
City, State: CLAYTON, MO 63105-1928
Phone: 314/665-2127
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Interior/Mechanical Design I (Long Beach, CA)

Description:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services

Education and Experience Requirements:
•Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.


Unique Skills:
• Successful candidate will work in a small team environment as part of one of our Mechanical Engineering design teams.
• Tasks will include creating engineering drawings of custom aircraft interior/mechanical components and systems.
• Business/Executive jet interior experience required.
• Attention to visual appearance/ aesthetics of completed designs is very important.
• Excellent communication skills and ability to work with operations technicians on the shop floor is required.
• Experience with sheet metal, metallic, and composite honeycomb, wood, veneer and cabinetry/ furniture design is a plus.
• Catia V5/SmarTeam experience required. Catia V4 experience a plus.
• AutoCAD experience preferred.
• Must have good basic 2D drafting skills- view layout, projection, section views, dimensioning, etc. Strong written and verbal communication skills required.

Principal Duties and Responsibilities:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
 
Job Number: 24-298
Job Location: Long Beach, CA
Rate: $51-$56
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 01/21/2019
Last Updated: 02/14/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Interior/Mechanical Design II (Long Beach, CA)

Description:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
• 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Unique Skills:
• Successful candidate will work in a small team environment as part of one of our Mechanical Engineering design teams.
• Tasks will include creating engineering drawings of custom aircraft interior/mechanical components and systems.
• Business/Executive jet interior experience required.
• Attention to visual appearance/ aesthetics of completed designs is very important.
• Excellent communication skills and ability to work with operations technicians on the shop floor is required.
• Experience with sheet metal, metallic, and composite honeycomb, wood, veneer and cabinetry/ furniture design is a plus.
• Catia V5/SmarTeam experience required. Catia V4 experience a plus.
• AutoCAD experience preferred.
• Must have good basic 2D drafting skills- view layout, projection, section views, dimensioning, etc. Strong written and verbal communication skills required.

Principal Duties and Responsibilities:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
 
Job Number: 24-297
Job Location: Long Beach, CA
Rate: $66-$74
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 01/02/2019
Last Updated: 01/14/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Jeff York
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Intrument Engineer (OK)

Description:
The Instrument Engineer is responsible for the design, engineering, and implementation of process instrumentation and control systems from initial conception through commissioning. The Instrument Engineer is responsible for design and engineering that provide the most reliable and cost- effective instrument and control systems. The Instrument Engineer also provides consulting services to process engineers in developing process design specifications, develops operating and training manuals for mechanical and process personnel, and participates in training operating personnel. The Instrument Engineer writes purchase and construction specifications and writes and performs Factory Acceptance Tests procedures. The Instrument Engineer specifies, procures, and configures Distributed Control Systems, and field hardware such as transmitters, control valves, and electronic transmission systems.

The Instrument Engineer utilizes American Petroleum Institute (API) Standards, Instrumentation, Systems and Automation Society (ISA) Standards, National Fire Protection Association (NFPA), and Client standards and practices to perform the above functions.

Responsibilities may include:
• Instrumentation and controls capital projects engineering including front-end-loading, cost estimates, specifications and oversight of detailed design.
• Identifying areas where instrumentation/controls can improve plant operation and profitability
• Owning and leveraging the application of instrumentation safety standards, mechanical integrity, design, and maintenance.
• Functioning as Project Engineer on instrumentation and control system capital projects and large instrumentation maintenance projects
• Using documentation systems and processes which maintain accurate instrumentation equipment and control system information and drawings
• Supporting criticality assessments of the plant's instrumentation equipment
• Designing Refinery Safety Instrumented Systems (SIS) design and maintenance
• Performing Safety Integrity Level (SIL) analysis and engineering upgrades of safety instrumented systems
• Assisting in developing strategic plans for implementing/upgrading instrumentation and control systems
• Serving as a technical resource to properly identify new and existing equipment specifications and proper operating parameters/ranges for instrumentation equipment
• Overseeing application and interpretation of National Electric Code and other applicable city, state, federal codes and standards (e.g. NPRA, NFPA, API, ISA)
• Performing audits of instrumentation installations and process control loops including failure analysis inspections
• Interacting with engineering and construction contractors, both on- site and off- site
• Review instrument changes for Management of Change approval. Ensure that changes are properly designed and documented.
• Assist with training and development of operators, technicians, and engineers to high-grade skill sets with respect to the instrument asset base.
• Support DCS operator interfaces with respect to information presentation and abnormal situation management.
• Facilitate increases in unit availability, increases in product quality, and reductions in refinery maintenance costs by developing and maintaining reliability systems for the plant’s instrumentation assets. Provide leadership for implementation of these reliability systems.

QUALIFICATIONS

Basic/Required:
(Remember, anything listed in this section is a qualification the candidate MUST have to be considered.)
• Must possess a bachelor's degree in Electrical Engineering, Chemical Engineering, Mechanical Engineering or Engineering Physics or equivalent
• 3+ years of experience in a refinery and/or chemical industry
• 3+ years of direct experience in process instrumentation design and/or maintenance.

Preferred: (Candidates do NOT have to have all of the items listed in this section to be considered.)
• Knowledge of the Ponca City Refinery instrumentation asset base.
• Proficient in use of SAP - PM & PS Modules
• Demonstrated knowledge and experience designing and supporting Safety Instrumented Systems (SIS), Safety Instrumented Functions (SIF), Layers of Protection Analysis (LOPA), and High Integrity Pressure Protection Systems (HIPPS).
• Proficient in computer applications such as Word, Excel, Outlook, and MS Projects
• Expert knowledge of field instrumentation and controls through design and field installation experience
• Demonstrated knowledge and experience on Programmable Logic Controllers (PLC) and Distributed Control Systems (DCS), preferably on Honeywell TDC3000 / Experion and FSC Safety Managers.
• Demonstrated knowledge on Process Analyzers, Chromatographs, and Gas Monitoring Systems.
• Demonstrated knowledge and use of SPI (InTools) database and specifications
• Strong analytical skills including statistical analysis
• Strong interpersonal and written communication skills
• Ability to lead execution of work and resolve issues in a team environment
• Accepts ownership, is accountable, and delivers on commitments
Ability to work in cross-functional teams

FOSTER DESIGN'S BENEFITS:
• Working for a 54-year old company
• Minimum 10 Paid Holidays, with no waiting period
• Immediate 401K participation with Voya, 1 year 100% vesting schedule, matching employer contribution
• Free Financial Consultant
• Medical/Dental/Vision/Prescription card – BCBS
• MetLife – Long Term Disability Insurance
• Vacation Accrual
• Paid Weekly (Direct Deposit)
 
Job Number: FD-010719OK
Job Location: Ponca City, OK
Rate: $BOE/HR
Per Diem: Possible Split
Overtime: Possible
Duration: 11 Months or longer
Start Date: ASAP
Input Date: 01/08/2019
Last Updated: 01/08/2019
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Landing Gear Engineer

Description:
• Landing Gear Engineer will be responsible for developing the subsystems requirements, architectures, roadmaps, and overall development of the subsystem from concept through certification.
• The candidate must be a subject matter expert in the relevant subsystem and have a thorough technical understanding of development of the subsystem.
• The candidate will be knowledgeable of FAR 25 certification requirements for the subsystem and subsystem components.
• Landing Gear Engineer will be responsible for the design of the relevant subsystems of the AS2 supersonic business jet to meet market and certification requirements.
• The successful candidate will have a commanding and fundamental understanding of how to design, analyze, and certify the relevant subsystem and have expert level knowledge of system integration into the aircraft.
• The candidate should be regarded as the technical subject matter expert for the relevant subsystem.

Basic Qualifications:
• BS degree or higher in mechanical/aerospace engineering.
• Minimum of seven years senior level technical experience in Landing Gear design and certification required.
• Experience with design and certification of FAR 23 or FAR 25 subsystems required.
• Strong technical, interpersonal, communication, administrative, and presentation skills. Demonstrated leadership in solving technical challenges.
• Significant experience on aircraft design teams, from concept through certification, in a collaborative multi-discipline team environment.
 
Job Number: 42-009
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 01/03/2019
Last Updated: 03/18/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Landing Gear System Design Engineer

Description:
General Summary:
Design Engineer responsible for the conceptual design and production engineering of Aircraft Landing Gear and Hydraulic Systems. The candidate will be responsible for conceptual layout, detailed design and aircraft production & in-service design and modification.

Duties and Responsibilities:
1. Generates Engineering Models and Drawings utilizing CATIA Version 5.
2. Performs trade studies to identify optimal engineering solution.
3. Collaborates with the Integrated Product Team to resolve cross functional issues.
4. Reviews work performed by others and ensure work is to the highest standard.
5. Implements Industry best engineering practices (design for manufacturing, design for reliability and design for maintainability).
6. Have the ability to understand and apply certification requirements.
7. Implement design solutions optimized for cost and weight.
8. Manages task execution to ensure on-time and on-target completion.
9. Utilizes drafting and Geometrical Dimensioning &Tolerancing knowledge to optimize part design for cost and functionality.
10. Searches for problem root cause and develop corrective action plans and solutions.
11. Serves as a primary interface within the Landing Gear and Hydraulic Systems group to ensure effective communication, coordination, and timely completion of project milestones.
12. Leads or participates in design / development reviews with management and internal customers. The candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience.

Education, Work Experience, Certification and/or Licensure:

1. BS in Mechanical Engineering with a minimum of 10 years directly related aviation engineering experience designing mechanical systems; experience can be used in lieu of education
2. Some Travel will be required

Knowledge, Skills and Abilities:
1. Proficient in use of CATIA Version 5.
2. Advanced knowledge of drafting rules.
3. Advanced knowledge of Geometrical Dimensioning and Tolerancing.
4. Proficient in Microsoft Office Products.
5. Use of Team Center.
6. Familiar with FAR Part 23 or Part 25.
7. Functional knowledge of SAP.

The Structures Company is an AA/EOE.
 
Job Number: 259
Job Location: NC
Per Diem: Yes
Overtime: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 03/27/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Lead Stress and Structural Engineer

Description:
Lead Stress and Structural Engineer

Location: Englewood, CO

Job Description: Lead Stress and Structural Engineer with a minimum of 8 years of aerospace stress work needed. Blackhawk experience is a plus. Having leadership experience is a requirement.

Min years of experience: 8 year analysis experience; previous experience in design, analysis and certification of aircraft systems working with engineering staff of military and civilian aircraft manufacturers. Leadership experience is a must.



Degree Requirements: Bachelor’s Degree (BS) in Mechanical, Aeronautical, Aerospace engineering or related engineering field from four year college or university and 8 years related experience and / or training or equivalent combination of education and experience



____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 55640
Job Location: Englewood, CO
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12 months
Start Date: 01/14/19
Input Date: 02/20/2019
Last Updated: 03/06/2019
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Looking for MP&P Engineers // Everett, WA

Description:
MP&P Engineer (Level 3 and 5)

Location: Everett, WA
Duration: 6 Months
3rd shift role

Job Description:
Coordinates definition of complex requirements for processes used in the manufacture of products. Establishes standards for specifications and other documents to manage the deployment of automated processes. . Promotes standardization across the Company. Leads evaluation of emerging technologies for potential application to business needs. Establishes standards to qualify new materials, parts and processes to meet requirements. Leads integration of new technologies. Coordinates complex analysis to determine reasons for failures of materials, parts or processes. Coordinates broadly based corrective and preventive actions. Leads design, development and qualification of sophisticated production systems to satisfy user requirements. Works under consultative direction. Responsible for implementing automated equipment and processes for use on 777-9 airplane composite wing assembly. Job responsibilities will include the daily production support of equipment and processes on 3rd shift plus weekend days as needed with a focus on automated drilling and fastening in CFRP, Al, & Ti, and supporting operations/processes.

Education / Experience:
Bachelor's degree with 14 or more years' experience, Master's degreee with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Skill Code: 6B5-Mechanical/Structures/Assembly
 
Job Location: Everett, WA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 months
Start Date: Asap
Input Date: 12/06/2018
Last Updated: 05/09/2019
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MANUFACTURING PROCESS ENGINEERS

Description:
Johnson Service Group (JSG) has teamed up with a leader in the aerospace, defense and commercial markets.
Our client is seeking talented Manufacturing / Process Engineers to provide manufacturing expertise to solve complex challenges, and to implement process and product improvements.

Scope of Experience and Responsibilities:

2-5 years+ of experience in an electro-mechanical assembly, test, or machine shop (CNC/NC) environment.
Experience in the commercial, aerospace, and/or military industry.
Background in E/M or hydraulic actuation systems is a plus but not required.
Controls engineering experience is a plus.
Strong knowledge of PFMEA, Six Sigma and Lean Manufacturing.
Must have participated in MRB material (NCR processing).
Provide technical solutions to address manufacturing issues
Support new capital equipment purchases and manufacturing implementation
Participate in process improvements on a project level.
Support manufacturing with implementing complex engineering improvements and solutions.
Adhere to Quality System requirements and support process audits.
Initiate and support Process Flow Charts, PFMEA, and Control Plans.
Experience with Project Planning tools, such as MS Project, is a plus.
Strong troubleshooting and problem-solving skills.
Excellent verbal and written communication skills are required.
Education/Training:

Bachelor of Science Degree in an Engineering, Aerospace or a related technical discipline is required
Six Sigma Green Belt is a plus
Start Date: As soon as possible

Duration: 3-6+ month contract position

Location: Ft. Collins, CA
 
Job Number: 368123
Job Location: FORT COLLINS, CO.
Per Diem: If qualified
Overtime: Possible
Duration: 3-6+ months
Start Date: ASAP
Input Date: 08/24/2018
Last Updated: 02/15/2019
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda J Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MP&P Engineer 5- Everett, WA

Description:
MP&P Engineer 5

Location: Everett, WA
Duration: 6+ months

Description:
Coordinates definition of complex requirements for composite materials, parts and processes used in the manufacture of products for the 777X Composite Wing Center. Promotes standardization across the Company. Leads evaluation of emerging technologies for potential application to business needs particularly in composite lamination and verification processes. Qualify new materials, parts and processes to meet requirements. Leads integration and process control of new technologies. Reviews and approves test and audit programs to qualify suppliers to applicable requirements. Coordinates complex analysis to determine reasons for failures of materials, parts or processes in composite lamination. Coordinates broadly based corrective and preventive actions. Leads development and qualification of sophisticated production systems to satisfy user requirements. Works under consultative direction.

Develops and sustains productive, high-level customer relationships as they relate to complex and large scale projects; actively seeks information to understand customers' circumstances, problems, expectations, and needs; presents project level information to senior level customers to build their understanding of issues and capabilities; considers how complex project level decisions/actions/plans will affect customers; responds quickly to meet significant customer needs and resolve complex problems; Sees alternative ways to view or define problems.
- Expert in composite automation and composite lamination. Develop and directs new material placement processes and machine requirements.
- Knowledge of client's organizations, processes, program plans, policies and procedures, and products required to effectively perform functional responsibilities of the occupation.
- Expert knowledge of assembly and production processes, manufacturing capabilities (e.g., composites, structures, composite lamination)
- Knowledge of FMEA and PFMEA.
- Expert knowledge of Design of Experiment and data analysis.
- Works on unusually complex technical problems and provides solutions which are highly innovative and ingenious.
- Develops advanced technical ideas and guides their development into final product.
- Serves as organization spokesperson on advanced projects and programs.

Other Skills:
Problem Solving; Detail Oriented; Collaborative leadership; Proactive investigation skills; Data analysis; Statistical analysis; DOE; Design in CAD software ( CATIA); Project Management; Microsoft;

Education / Experience:
Bachelor's degree with 14 or more years' experience, Master's degree with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Skill Code: 6B5-Mechanical/Structures/Assembly
 
Job Location: Everett, WA
Rate: Open
Per Diem: Split
Overtime: Yes
Duration: 6 months
Start Date: Asap
Input Date: 09/19/2018
Last Updated: 05/09/2019
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Engineer (9 positions left, Tulsa, OK)

Description:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Experience/Education
• Bachelor’s degree in aerospace or mechanical engineering.

Unique skills/Experience
• Minimum 7 years dedicated structures MRB Engineering experience at a recognized aerospace manufacturer.
• Experience should include creation and justification of engineering dispositions for nonconformances of composite and metallic, pressurized and non-pressurized aircraft structures.
• Composite experience should include fiberglass, carbon/epoxy, laminate/sandwich assemblies.
• Familiarity with results of composite NDI/NDT methods required.
• Experience should be in a Production and/or schedule-driven environment.
• Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
• Strong written/verbal communication and interpersonal skills.
• Must be computer literate (such as, but not limited to: Catia V5, SAP, Solumina, Smarteam, Word, Excel)
• Typically a 40 hr work week, with some week/weekend OT a possibility.

Essential Functions
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Acts as liaison with representatives outside of the assigned group/area

aircraft aerospace
 
Job Number: 24-303
Job Location: Tulsa, OK
Rate: $64-$67
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 09/30/2019
Last Updated: 10/02/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Engineer - Systems or Structures

Description:
The Engineer for Liaison/MRB reviews defects and establishes root cause, provides an acceptable disposition to repair the discrepant condition using engineering principles and determines if a corrective action required for mechanical systems

Duties and Responsibilities:
• Resolves complex engineering problems related to the build of the aircraft
• Reviews defects and establishes root cause, provides an acceptable disposition to repair the discrepant condition using engineering principles and determines if a corrective action is required
• Reviews Engineering documentation (drawings, test procedures, and discrepancy tags) to enable technicians to understand the documents and continue working
• Reviews, develops, and implements revised/new processes using six sigma/lean principles
• Provides an acceptable disposition of non-conformance of commercial mechanical systems or structures encountered during Manufacturing/Assembly process and production, including reporting of failures, malfunctions, and defects
• Documents how to repair the discrepancy using engineering principles
• Assists in determining if defects are Engineering related or workmanship issues. Documents defect findings
• Ensures that the proposed repair is equivalent to the Blueprint design or will not affect systems functionality
• Incorporate design changes using CATIA V5

Qualifications
Education, Work Experience, Certification and/or Licensure:
• Bachelor's degree in Engineering or related field of study
• 6 years’ experience serving as a Liaison for MRB Structures is required
• Computer proficient with experience in Microsoft Office Programs (SAP a plus)
• Excellent written and oral communication skills

Knowledge, Skills and Abilities:
• Experience with MRB design, or repair of structures
• Knowledge of corrosion prevention
• Knowledge of non-destructive testing
• Advanced knowledge of Aircraft Structures or Systems
• CATIA V5, and Standard Repair Methods (SRM)
• Extensive experience with Six Sigma

The Structures Company is an AA/EOE.
 
Job Number: 245
Rate: $55/HR
Per Diem: Yes
Overtime: Yes
Duration: 12+ Months
Input Date: 02/12/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Machine & Tool Designer I ( Clearfield, Utah ) S8752572 & S8752574

Description:
Machine & Tool Designer I ( Clearfield, Utah ) S8752572 & S8752574
12 Month Contract

Pay Rate: $55-60/hr maybe more for the right candidate

**Active DoD Secret Clearance required

Tool Engineer to work in a composite aircraft and rocket motor fabrication environment.
Responsibilities:
• Project manages internal and external engineering personnel resources to provide production quality rocket motor and aircraft tooling in support of development programs
• Concepts and designs special tooling within an Integrated Product Team structure
• Manages tooling technical, quality and schedule
• Uses and/or manages Computer Aided Design (CAD) resources for tooling design
• Works with vendors to ensure successful fabrication of tooling
• Witnesses source inspection of special tooling at fabrication locations
• Proofs tooling upon receipt
• Maintains tooling documentation related to design, fabrication and proofing
• Provides tooling estimates for new tools
Education and Experience Requirements:
BS/MS in Mechanical, Aerospace or Civil Engineering, or related field plus a minimum of 2 years experience with BS or 0 years experience with MS in engineering. Preference given to candidates with experience in an aerospace manufacturing environment.
Screening Criteria
• DoD Secret Clearance required
• Design experience using 3D CAD systems (CATIA V5, NX) preferred
• NX experience preferred over CATIA V5
• Closed form and/or FEA stress analytical capability preferred
• Experience with project management including budget, schedule and technical
• Experience with design, fabrication and installation of tooling for rocket motor and/or aircraft composite parts and assemblies
• Experience with general metallic fabrication including welding, machining, and forming.
 
Job Number: S8752572
Job Location: Clearfield, UT
Rate: open
Per Diem: no
Overtime: yes
Duration: 12 months
Start Date: ASAP
Input Date: 02/07/2019
Last Updated: 02/20/2019
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer
Location: Ocala, FL
Duration: 4 months
 
Description:
Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling. May incorporate inspection and test requirements into the production plan. Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality. Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques. Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensures processes and procedures are in compliance with regulations.
 
Skill/Experience/Education:
Mandatory
Bachelor's degree in Mechanical Engineering or Aerospace Engineering or related discipline from an accredited college. Minimum 2 years of professional experience.
 
Desired:
Experienced with SAP
Experienced with Microsoft, Office (PowerPoint, Access, Word, Excel).
Knowledge of electro-mechanical assembly, industrial processes, technical writing, and teaming.
Strong written and verbal communication skills.
Knowledge of Lean manufacturing concepts and techniques,
Pro-E, or equivalent CAD software, tool design, electronic, packaging design, and MRS, concepts
Leadership experience
Experience in a Manufacturing environment.
 
Skill Matrix:
Skill Name                                            Description                                                                                                           Level                Years   Mandatory (Yes/No)
Work Instruction Development  Development of Work Manufacturing Instructions for CCA or C&H build in SAP.      3                      0-3 Years                        Yes
Hardware Process Development            CCA, ECA, and/or C&H                                                                              3                      0-3 Years                        Yes
Direct Production Support         Provide direction and training to hourly production workers                                                        5                      0-3 Years                      Yes

Please send resume at rchaudhary@iconma.com or call (804)915-9602
 
Job Number: 18-20523
Job Location: Ocala, FL
Rate: Open
Per Diem: YES
Overtime: Possible
Duration: 4 Years
Start Date: ASAP
Input Date: 12/12/2018
Last Updated: 01/03/2019
Firm Name: ICONMA LLC
Attention: Rohit
Address: 1201 PACIFIC AVE STE 600
City, State: TACOMA, WA 98402
Phone: 253/213-2012
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer has experience in a Manufacturing or Mechanical Environment. Should have good communication and customer satisfaction skills. Preferred Experience with ERP or Manufacturing Planning Software and Microsoft Office Software.

Manufacturing Engineer Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.



Manufacturing Engineer performs technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform producibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Manufacturing Engineer has proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.


Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.
 
Job Location: Savanna, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 09/06/2018
Last Updated: 01/25/2019
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer (2 needed, Retrofit)

Description:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment

Unique Skills:
Solumina and SAP experience preferred

Principal Duties And Responsibilities:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing.
• Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
• Author DRDI/DMT rework instructions to support effective corrective actions.
• Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements.
• Participate in Design for Manufacturing assessments with Engineering.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Support all Safety, Sustainability and Ergonomic Initiatives.

Other Requirements:
• Proven knowledge of Lean and/or Six Sigma principles.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc.
• Lean Six Sigma Greenbelt Certification or higher preferred.

Experience/Education:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen months Manufacturing Engineering, planning, or related technical experience.

aircraft aerospace
 
Job Number: 24-307
Job Location: Savannah, GA
Rate: $52.50
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 01/21/2019
Last Updated: 03/05/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer (4 needed, Wing Assembly)

Description:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Unique Skills:
• Preferred Experience in a Manufacturing or Mechanical Environment. Should have good communication and customer satisfaction skills. Required Experience with ERP or Manufacturing Planning Software and Microsoft Office Software.
• SAP and or Solumina experience preferred.

Education and Experience Requirements:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen months Manufacturing Engineering, planning, or related technical experience.



Principle Duties and Responsibilities:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
• Author DRDI/DMT rework instructions to support effective corrective actions.
• Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
• Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.
• Proven knowledge of Lean and/or Six Sigma principles.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
 
Job Number: 24-286
Job Location: Savannah, GA
Rate: $50
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 01/21/2019
Last Updated: 02/06/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer (Completions, Planning)

Description:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Unique Skills:
• Solumina, SAP, CATIA V5, SmarTeam, Electrical Engineering, Planning
Principle Duties and Responsibilities:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed)
• Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
• Author DRDI/DMT rework instructions to support effective corrective actions.
• Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements.
• Participate in Design for Manufacturing assessments with Engineering.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Support all Safety, Sustainability and Ergonomic Initiatives.
• Aid in development and maintenance of Business Continuity Plan.

Other Requirements:
• Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
• Initiate and maintain accurate daily/weekly activity status based on work output, as required.
• Perform other duties as assigned.

Education and Experience Requirements:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen months Manufacturing Engineering, planning, or related technical experience.
 
Job Number: 24-307
Job Location: Savannah, GA
Rate: $52.50
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 01/21/2019
Last Updated: 03/18/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer (Composites)

Description:
• Exposure to Composite manufacturing processes and tools such as clean room layup techniques, Autoclaves, Gerber, CNC machining, NDT inspection methods and/or experience troubleshooting fabrication issues are highly desirable.
• Experience with SharePoint/SAP/SOLUMINA/Majestic Systems (TruLASER,TruNEST) are preferred.

Requirements:
• Proven knowledge of Lean and/or Six Sigma principles.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc.
• Lean Six Sigma Greenbelt Certification or higher preferred.

Education and Experience Requirements:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen months Manufacturing Engineering, planning, or related technical experience.

Essential Functions:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform producibility studies from engineering drawings.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• Utilize CADAM/CATIA data and nesting software to generate flat patterns, Master Models, NC data, and ply nests to meet Engineering and Manufacturing requirements.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
 
Job Number: 24-359
Job Location: Savannah, GA
Rate: $52.50
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 07/02/2019
Last Updated: 07/22/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer - Level 3

Description:
Location: Canoga Park, CA
Rate: Level 3 = $40.00 - $48.00/HR
Duration: 6 month contract
Shift: 2nd Shift (2:45 PM to 11:15 PM)
Per Diem Split: Yes (if eligible)


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role **

** Looking for go getters with positive, can-do attitudes. Candidates must be open to learning and be able to take initiative. This is by far the most important attribute needed **

** In-person interviews strongly preferred, so local candidates highly preferred **

Duties:
The Manufacturing Engineer classifications are responsible for design, fabrication, modification, analysis and evaluation of manufacturing operations, processes, procedures and production layouts for the support of manufacturing/assembly operations such as rocket motor propellant and/or insulation manufacture, equipment installation, machining, metal forming, welding and brazing, and material handling.


Skills:
Required Skills:
- Designing and planning of layout component fabrication, assembly and material handling, planning of sequence of operations, and specification procedures.
- The scope of responsibility will be for several mechanical components or as a process engineer supporting new and developing process.

Desired Skills:
- Tight tolerance machining, Welding, Design systems (ProE, CATIA, VisMockup, CAD/virtual manufacturing).
- Manufacturing fabrication and assembly processes and systems. Verbal and written communication.
- Project management skills and MS Office applications ( Word, Excel).
- Experience with Maestro, Delmia and Windchill are preferred, not required.
- Aerospace experience preferred but not required.


Education:
- Requires a Bachelor's degree in an appropriate discipline and 5 years of related experience, or an equivalent combination of education and experience.
 
Job Number: 9853
Job Location: Canoga Park, CA
Rate: $40.00 - $48.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/16/2018
Last Updated: 01/29/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer I / no clearance NM

Description:
163811 Manufacturing Engineer I
There are 6 openings!

Work Site Address : Albuquerque NM
Job Number: 8853403
Max Pay Rate: 45.00


Start Date: ASAP
End Date: 6-12 Months
Position Type: Contract

• Involved in all phases of product life cycle, beginning with proposal development and advanced manufacturing initiatives, continuing through production implementation and extending to support of our customer and supply chain
• Work on a wide range of weapon systems, from tactical missiles to strategic defense products
• Design, control, and improve the manufacturing process and system design through a collaborative effort with the value stream team
• Reduce cycle time and customer lead time
• Reduce inventory
• Improve productivity
• Reduce material cost
• Improve performance of the value chain
• Manufacturing process control and performance monitoring
• Planning and incorporation of design changes
• Creating and overseeing projects using risk management techniques
• Translating engineering design requirements into formal manufacturing process documentation Disposition of discrepant hardware
• Leading corrective action investigations to prevent recurrence
• Developing tooling concepts
• Interfacing with customers and suppliers
• Providing technical leadership to multi-disciplined teams
• Ensuring quality, cost, and schedule objectives are achieved
Production technologies employed include:
• Equipment driven processes
• Material handling practices
• Statistical process control
• Lean principles


Required Skills
• Technical problem solving
• Engineering interpretation of technical documentation
• Team leadership
• Project and risk management

Desired Skills:
• Advanced manufacturing technologies
• Practical knowledge gained through previous related employment Required Education: This position requires a Bachelor of Science or Master of Science degree from an ABET accredited engineering curriculum in a field such as Manufacturing Engineering, Industrial Engineering, Electrical Engineering, Mechanical Engineering, Aerospace Engineering, Chemistry, Physics, or related field with a minimum cumulative GPA of 3.0 or higher.
 
Job Number: MB-R8853403
Job Location: Albuquerque, NM
Rate: 45/hr max
Per Diem: no
Duration: 12 months
Input Date: 01/07/2019
Last Updated: 01/14/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
The ideal candidate for this position will perform the following tasks:
* Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed).
* Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
* Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
* Author DRDI/DMT rework instructions to support effective corrective actions.
* Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
* Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
* Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
* Investigate and assist in preparing justification for equipment and facility requests.
* Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements.
* Participate in Design for Manufacturing assessments with Engineering.
* Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
* Perform audit of co-workers output based on defined requirements and procedures.
* Must demonstrate knowledge of ME policies and procedures.
* Incorporate Lean Manufacturing Methodology into existing and future processes.
* With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
* Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
* Support all Safety, Sustainability and Ergonomic Initiatives.
* Aid in development and maintenance of Business Continuity Plan

Mandatory Qualifications and Experience:
* Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
* 18 months Manufacturing Engineering, planning, or related technical experience.
* Proven knowledge of Lean and/or Six Sigma principles.
* Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
* Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.

Desired Qualifications and Experience:
* Lean Six Sigma Greenbelt Certification or higher preferred.
* Strong understanding of Configuration Management SAP ERP System experience preferred
 
Job Number: 129521
Job Location: Savannah, GA
Start Date: ASAP
Input Date: 01/09/2019
Last Updated: 01/23/2019
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $52.50/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
Solumina and SAP experience preferred.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 10243
Job Location: Savannah, GA
Rate: $52.50/HR
Per Diem: Split Possible
Duration: LT
Input Date: 03/01/2019
Last Updated: 03/04/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Unique Skills:
• Strong Configuration Management Skills SAP/ERP System experience preferred

Principal Duties And Responsibilities:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing.
• Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
• Author DRDI/DMT rework instructions to support effective corrective actions.
• Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements.
• Participate in Design for Manufacturing assessments with Engineering.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.


Other Requirements:
• Proven knowledge of Lean and/or Six Sigma principles.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc.
• Lean Six Sigma Greenbelt Certification or higher preferred.

Experience/Education:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen months Manufacturing Engineering, planning, or related technical experience.
 
Job Number: 24-287
Job Location: Savannah, GA
Rate: $50
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 06/18/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II (2 needed)

Description:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Unique Skills:
• Solumina, SAP, CATIA V5, SmarTeam, Electrical Engineering, Planning

Principle Duties and Responsibilities:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed)
• Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
• Author DRDI/DMT rework instructions to support effective corrective actions.
• Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements.
• Participate in Design for Manufacturing assessments with Engineering.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Support all Safety, Sustainability and Ergonomic Initiatives.
• Aid in development and maintenance of Business Continuity Plan.

Other Requirements:
• Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
• Initiate and maintain accurate daily/weekly activity status based on work output, as required.
• Perform other duties as assigned.

Education and Experience Requirements:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen months Manufacturing Engineering, planning, or related technical experience.
 
Job Number: 24-306
Job Location: Savannah, GA
Rate: $52.50
Per Diem: 1/2 of hourly rate, 1st year
Overtime: Yes, 1.5
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 01/21/2019
Last Updated: 02/06/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II (2 needed, Retrofit)

Description:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment

Principal Duties And Responsibilities:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing.
• Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
• Author DRDI/DMT rework instructions to support effective corrective actions.
• Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements.
• Participate in Design for Manufacturing assessments with Engineering.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Support all Safety, Sustainability and Ergonomic Initiatives.

Other Requirements:
• Proven knowledge of Lean and/or Six Sigma principles.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc.
• Lean Six Sigma Greenbelt Certification or higher preferred.

Experience/Education:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen months Manufacturing Engineering, planning, or related technical experience.
 
Job Number: 24-301
Job Location: Savannah, GA
Rate: $55
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 01/21/2019
Last Updated: 02/06/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II (Mods, rework, cabin)

Description:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed).
• Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
• Author DRDI/DMT rework instructions to support effective corrective actions.
• Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform producibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements.
• Participate in Design for Manufacturing assessments with Engineering.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Support all Safety, Sustainability and Ergonomic Initiatives.
• Aid in development and maintenance of Business Continuity Plan.
• Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
• Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements:
• Proven knowledge of Lean and/or Six Sigma principles.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
• Lean Six Sigma Greenbelt Certification or higher preferred.

Education and Experience Requirements:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen months Manufacturing Engineering, planning, or related technical experience.
 
Job Number: 24-302
Job Location: Savannah, GA
Rate: $50
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 01/21/2019
Last Updated: 02/06/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II - Composites

Description:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

UNIQUE SKILLS
• Preferred candidate must have composite material structure manufacturing or aerospace manufacturing assembly experience.
• Solumina and/or Catia experience desirable.

EDUCATION AND EXPERIENCE REQUIREMENTS
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen months Manufacturing Engineering, planning, or related technical experience.

REQUIREMENTS
• Proven knowledge of Lean and/or Six Sigma principles.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc.
• Lean Six Sigma Greenbelt Certification or higher preferred.

ESSENTIAL FUNCTIONS
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform producibility studies from engineering drawings.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• Utilize CADAM/CATIA data and nesting software to generate flat patterns, Master Models, NC data, and ply nests to meet Engineering and Manufacturing requirements.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Support all Safety, Sustainability and Ergonomic Initiatives.
• Aid in development and maintenance of Business Continuity Plan.
• Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
• Initiate and maintain accurate daily/weekly activity status based on work output, as required.
 
Job Number: 24-292
Job Location: Savannah, FL
Rate: $50
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 01/21/2019
Last Updated: 02/06/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II (Electrical Planning)

Description:
• Experience in Electrical Planning, Electrical Floor Support, Mechanical System Floor Support
• Candidates must have experience with Catia V5. Experience with Solumina and SAP is preferred.
• Candidates must possess proven knowledge of aircraft systems and structural assemblies/installations.

Principal Duties And Responsibilities:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform producibility studies from engineering drawings.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• Utilize CADAM/CATIA data and nesting software to generate flat patterns, Master Models, NC data, and ply nests to meet Engineering and Manufacturing requirements.
• With minimal supervision, lead/coordinate the implementation of projects between multiple organizations
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Support all Safety, Sustainability and Ergonomic Initiatives.
• Aid in development and maintenance of Business Continuity Plan.

Experience/Education:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen months Manufacturing Engineering, planning, or related technical experience.
 
Job Number: 24-019
Job Location: Savannah, GA
Rate: $52.50
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 06/18/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

Manufacturing Support

Description:
PDS Tech, Inc. is seeking a candidate for the Manufacturing Support position located in Fairfield, OH.
This is an apprenticeship position that will prepare you to advance to the Press Operator level.  

Please reach out to Anita Collins at acollins@pdstech.com

What You Will Do:
  • Assist the Press Operator in running the production line.
  • Learn basic press operation. 
  • Pack finished product.
  • Operate finishing equipment.
  • Prepare tooling for production, including die inventory management and basic tooling set up.
  • Perform general housekeeping duties to maintain an orderly environment.

What You Will Get:

  • A position working at a world-class Fortune 100 manufacturer
  • Training in the area of specialty: an opportunity to learn advanced manufacturing methods and techniques.
  • A fair and consistent pay check

Education:

• High school diploma or GED Required 



Experience:

• Prior experience in manufacturing preferred 

• Demonstrated mechanical aptitude via educational or job experience 



Skills:

• Basic computer navigation and data entry skills required 

• Basic to intermediate mechanical skills required 

• Ability to lift up to 50 lbs unassisted 

• Willingness and ability to perform in a fast paced team environment 

 
 
Job Number: 1810082840
Job Location: Fairfield, OH
Duration: 4 months
Input Date: 09/11/2018
Last Updated: 01/20/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Anita Collins
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002e1O3AAI&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Technology Analyst 2

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Manufacturing Technology Analyst 2
(U.S. Citizenship Required*)
New Orleans, LA
2018-7545

Responsibilities:
• Develop and implement precision measuring methodologies in support of fabrication for The NASA Space Launch Systems Core Stage production.
• Coordinate and implement new engineering principles, theories, advanced technologies and concepts.
• Validate and ensure production readiness of solutions to complex problems.
• Implement lean principles and technologies.
• 2nd shift position: 2:30pm – 11:00pm

Qualification:
• Experience with software applications including: Spatial Analyzer, PRO-E, Catia, Word, Excel, Project, Access, Visio and knowledge in DELMIA software
• Knowledge of precision measurement tools and techniques for the inspection and validation of mechanical test and flight hardware components and assemblies (e.g. conventional gages and measurement tools, CMM, laser tracker, theodolites).
• Familiar with associated validation software for comparative analysis.
• Able to document and report on results, and address discrepancies.
• Knowledge of assembly and production processes, manufacturing capabilities and data needed for defining delivery configurations (e.g., design definition, program directives, engineering drawings, change memos, wiring diagrams and schematics, functional tests, supplier data).
• Expert level experience with applying geometric dimensioning & tolerancing (GD&T) per ASME Y14.5.
• Able to script laser inspection sequences within the Spatial Analyzer software including the import of CAD models & definition of the appropriate axis system per GD&T requirements.
• Knowledge of measurement systems (e.g., photogrammetry, coordinate measuring machines, laser tracker, laser radar, laser alignment, portable measurement tools).
• Able to design measurement systems and tools.
• Knowledge of manufacturing, methods, fabrication processes and ability to impact performance, cost or schedule.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's degree preferred and typically 3 or more years’ related work experience, a Master’s degree and typically 1 or more years’ related work experience or an equivalent combination of education and experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-7545
Job Location: New Orleans, LA
Rate: Based on experience
Duration: 6 Months
Input Date: 01/18/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Lauren Hogan
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Materials Engineer - Metals / Nonmetallics

Description:
Materials Engineer - Metals / Nonmetallics

Location: Windsor Locks, CT
Pay Rate: $65/hr
Duration: 12 month W2 contract
Shift: First
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**
**NO RELOCATION COMPENSATION**

Description:
Manage a high complexity or multiple projects to perform analysis and characterization of metallic and non-metallic materials, and processing techniques in order to meet the requirements for the procurement, design, or operation of product; perform analysis and characterization of advanced materials. Additional responsibilities may include leading failure analyses, mechanical testing, corrosion studies, tribological evaluations, and environmental compatibility assessments.

Additional Job Details:
Review engineering drawings for in-house and supplier designs for compliance with requirements. Familiarity with NASA materials requirements is a plus. Looking for 5-10 years of experience.

Education:
-Bachelors degree required
 
Job Number: 9699
Job Location: Windsor Locks, CT
Rate: 65
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 08/29/2018
Last Updated: 01/11/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mech Sys Design & Anlys Engr 3 at Everett, WA

Description:
Mech Sys Design & Anlys Engr 3

Location: Everett, WA
Duration: 3+ months (Possible extension)

Job Description:
Supports the development and documentation of mechanical and fluid system and thermal environment requirements to establish the system design. Supports the development, maintenance or modification of system, component and installation designs/proposals to provide design documentation to downstream groups. Performs and documents analyses to validate and verify systems and components meet requirements and specifications. Contributes to supplier development, test and production activities and directs the supplier to optimize integration and achieve program goals. Supports system components'' designs/proposals standards to provide installation and detail documentation. Works under general direction.

Education / Experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

Skill Code: 62D-Hydraulic Sys, Actuation
 
Job Location: Everett, WA
Rate: Open
Per Diem: Split
Overtime: Yes
Duration: 3 months
Start Date: Asap
Input Date: 09/25/2018
Last Updated: 05/09/2019
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

Mechanical Assembler

Description:

Description:  



Performs various production assembly operations on components and subassemblies.  Working under limited supervision uses visual aids, lists, and verbal and written instruction to assemble, modify, re-work or re-assemble units.  Assignments are complex.  Receives minimal instruction on routine work and general instructions on new assignments.  May guide work of Assembler I and II.  All work is performed in explosive handling areas or where explosive devices may be present.



  • Follow and meet manufacturing build schedules
  • Manufacture sub-assemblies
  • Knowledge of condition and countability of subassemblies
  • Set-up and operate electrical test equipment
  • Must know and be able to recognize proper tooling for a specific task
  • Must be able to perform mechanical assembly and solder connections
  • Must be able to work from assembly prints, drawings and work orders
  • Train less experienced assemblers as required
  • Other functions as assigned

Qualifications:

  • Three to five years minimum experience as a mechanical assembler
  • Applicants selected will be subject to a government investigation and must meet eligibility requirements for access to classified information.  Process to be initiated immediately after transfer
  • Cross-trained in multiple operations
  • Must be able to read and understand manufacturing procedures
  • Experienced in using a variety of hand tools, measuring devices, microscope
  • General knowledge of calibration systems
  • Must have basic soldering and welding skills
  • Strong interaction skills also required
  • Lift up to 25 lbs.




     
    Job Number: 1810088112
    Job Location: Hollister, CA
    Duration: 3 months
    Input Date: 07/25/2018
    Last Updated: 01/20/2020
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Pam Zack
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mabNAAQ&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Design Engineer

    Description:
    - Pro Engineering (Pro E) and or Unigrapics NX
    - Develop sub-system/component level requirements and design concepts.
    - Design, select, integrate components.
    - Source select and interface with suppliers.
    - Perform engineering analysis to evaluate sub-system/component designs.
    - Work with design services to create/release detailed models and drawings.
    - Support concurrent engineering, procurement and prototype build/integration activities.
     
    Job Number: 45381
    Job Location: MI
    Rate: Open
    Per Diem: Split
    Overtime: Possible
    Duration: 12 mos +
    Start Date: ASAP
    Input Date: 01/09/2019
    Firm Name: PANTHER GROUP
    Attention: Marques
    Address: 5 MILL AND MAIN PL STE 430
    City, State: MAYNARD, MA 01754
    Phone: 781/790-7900
    800 Phone: 800/776-0562
    Fax Phone: 781/672-2570
    Website: www.thepanthergrp.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Design Engineer

    Description:
    Must be a U.S. Citizen

    Mechanical Engineer with mechanical design and packaging using Creo, Researches, plans, designs and develops mechanical products and systems such as instruments, controls, robots, engines, machines and mechanical, thermal hydraulic or heat transfer systems for production, transmission, measurement, and use of energy. Applies research to the planning, design, development, and testing of mechanical and/or electromechanical systems, instruments, controls, engines, and/or machines.
     
    Job Number: 45738
    Job Location: FL
    Rate: Open
    Per Diem: Split
    Overtime: Possible
    Duration: 12 mos +
    Start Date: ASAP
    Input Date: 01/09/2019
    Firm Name: PANTHER GROUP
    Attention: Marques
    Address: 5 MILL AND MAIN PL STE 430
    City, State: MAYNARD, MA 01754
    Phone: 781/790-7900
    800 Phone: 800/776-0562
    Fax Phone: 781/672-2570
    Website: www.thepanthergrp.com

    Mechanical Design Engineer - Creo - Secret clearance

    Description:
    -Creo design experience
    -develops and designs complex mechanical or electro-mechanical --components and/or assemblies, packaging of components.
    -extensive experience with Creo CAD system.
    -must have an active Secret walking on.
     
    Job Number: 21547
    Job Location: AZ
    Rate: open
    Per Diem: yes
    Overtime: possible
    Duration: Contract
    Start Date: 2 weeks
    Input Date: 10/03/2018
    Last Updated: 01/20/2020
    Firm Name: ADVANCED TECHNOLOGY
    Attention: Domenic
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Email: davellino@advancedtechno.com
    Website: www.advancedtechno.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Designer

    Description:
    MECHANICAL DESIGNER
    A respected mechanical, electrical, plumbing, fire protection, and lighting design engineering firm in Tulsa is currently seeking a Mechanical Designer to provide Mechanical/HVAC design services on a variety of commercial building projects.



    RESPONSIBILITIES:



    • Technical design on assigned projects

    • Assist in the production of construction documents (drawings and specifications) for new buildings, and for renovations and additions to existing facilities

    • Perform initial site investigations and observations of work done by the installing contractor(s) related to contracted projects

    • Provide coordination of project designs with other disciplines

    • Maintain assigned project schedules

    • Develop and maintain positive client relationships



    QUALIFICATIONS:



    • Bachelor's degree in Mechanical Engineering (preferred)

    • Three+ years of experience in HVAC/plumbing design in the MEP field

      Related experience in the design of commercial building HVAC and plumbing systems

    • Knowledge of building mechanical codes and ability to perform accurate load calculations

    • Knowledge of sustainable design practices

    • Possess excellent verbal and written communication skills

    • Highly proficient in the use of Revit, AutoCAD and engineering modeling tools



     



    Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.


     
    Job Number: 19-01333
    Job Location: Tulsa, OK
    Rate: 0.0USD/Hour
    Per Diem: --
    Overtime: --
    Duration: Direct
    Start Date: 2019-01-10 00:00:00.0
    Input Date: 01/10/2019
    Last Updated: 01/30/2019
    Firm Name: NESCO RESOURCE
    Attention: Kristy Thompson
    Address: 101 COMMERCE ST STE 3001
    City, State: LAKE MARY, FL 32746
    Phone: 407/710-8000
    Fax Phone: 407/710-8001
    Website: www.nescoresource.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Designer

    Description:

    MECHANICAL DESIGNER

     


    We are currently seeking a Mechanical Designer for a Rogers, AR engineering office. This individual will provide Mechanical/HVAC design services on a variety of commercial building projects.



    RESPONSIBILITIES:



    • Technical design on assigned projects

    • Assist in the production of construction documents (drawings and specifications) for new buildings, and for renovations and additions to existing facilities

    • Perform initial site investigations and observations of work done by the installing contractor(s) related to contracted projects

    • Provide coordination of project designs with other disciplines

    • Maintain assigned project schedules

    • Develop and maintain positive client relationships



    QUALIFICATIONS: 



    • The ideal candidate will have a bachelor's degree in mechanical engineering (preferred, not required)

    • Minimum of three years of experience in HVAC/plumbing design in the MEP field

    • Related experience in the design of commercial building HVAC and plumbing systems

    • Knowledge of building mechanical codes and ability to perform accurate load calculations

    • Knowledge of sustainable design practices

    • Possess excellent verbal and written communication skills

    • Highly proficient in the use of Revit, AutoCAD and engineering modeling tools


     

     


     
    Job Number: 18-52888
    Job Location: Rogers, AR
    Rate: 0.0USD/Hour
    Per Diem: --
    Overtime: --
    Start Date: 2018-12-20 00:00:00.0
    Input Date: 12/20/2018
    Last Updated: 01/31/2019
    Firm Name: NESCO RESOURCE
    Attention: Kristy Thompson
    Address: 101 COMMERCE ST STE 3001
    City, State: LAKE MARY, FL 32746
    Phone: 407/710-8000
    Fax Phone: 407/710-8001
    Website: www.nescoresource.com

    Mechanical Designer / SECRET CLEARANCE/Solid-works, NX, Catia

    Description:
    Desired Qualifications:
    **Candidate must have an ACTIVE SECRET**
    •Prefer 4+ years of directly related experience
    developing 3D models and detailed drawings
    using either Solid-works or NX, or Catia and AutoCAD
    •Familiarity with aircraft systems or Simulation equipment experience.
     
    Job Number: 658574
    Job Location: mid west
    Rate: competitive
    Per Diem: yes
    Overtime: possible
    Duration: 12 month plus/contract
    Start Date: ASAP
    Input Date: 10/03/2018
    Last Updated: 01/20/2020
    Firm Name: ADVANCED TECHNOLOGY
    Attention: Domenic
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Email: davellino@advancedtechno.com
    Website: www.advancedtechno.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Designer Drafter / NX OH

    Description:
    Request number: 5752
    Job title: Mechanical Designer Drafter
    Job code: Number of openings: 2

    Position location: Orrville - OH
    Employment type: Contract
    OT exempt: No

    Shift: 1st
    Education Requirement: BS/BA
    Driving on company time?: No

    Maximum Hourly Pay Rate: 24
    Start Date: 12/17/2018
    Tentative End Date: 12/16/2019

    Job Description

    As a Mechanical Designer-Drafter, you’ll be part of a product engineering design and development team working closely with engineers to develop their thoughts and sketches into layouts, drawings and schematics.

    Here’s what you can expect as a Mechanical Designer-Drafter

    · Contribute to a cost effective design and functional products.

    Insure basic integrity of designs and layouts.
    · Review tolerances for impact on fits, design requirements, and effects on costs.

    · Act as a focal point for projects as they progress from concept to release.

    · Create drawings and 3D models from varying levels of instruction or input

    To take on this role, you’ll need
    Associate’s Degree, preferably with technical focus.
    3 years of related experience including 3D modeling and drawing experience (preferably NX)
    Comprehensive knowledge of good drafting practices and techniques, machine shop practices, part fabrication methods, mathematics through descriptive geometry, dimensioning techniques, and geometric tolerancing.
    Strong communication skills and attention to detail.
    Ability to be flexible with job duties transitioning from parts coordination to drawing and modeling. Able to tolerate ambiguity and work with limited direction.


    Request status: Open
     
    Job Number: MB-5752
    Job Location: Orrville, OH
    Rate: 24/hr max
    Per Diem: no
    Duration: 12 months
    Input Date: 02/04/2019
    Last Updated: 03/12/2019
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Drafter/Designer

    Description:
    Responsibilities
    Managing, executing and supporting mechanical design of assigned projects. Perform duties with limited supervision and a high degree of responsibility, ensuring that tasks are completed on schedule, within budget, to specifications to Cenco Quality standards.

    Accountabilities:
    Responsible for the mechanical design of assigned projects
    Analysis, design, drafting, and verification
    Perform calculations, in activities related to product, form, fit, structural requirements and function supporting project requirements
    Team oriented, working with mechanical engineers and designers
    Practice and encourage a First-Time-Right approach for the preparation of design deliverables per the approved budget and schedule
    Establish and verify design criteria, ensuring that product designs are produced in accordance with company design and quality standards and practices as well as customer specifications
    Ensure cost effective mechanical designs in compliance with specified technical and contractual requirements
    Design with total cost awareness including factors such as ease of manufacturing, material availability, minimizing likely deviation requests, shipping constraints, ease of installation and product maintenance and usability in addition to the amount of engineering effort required to complete the task.
    Completing assigned tasks with minimal supervision and in accordance with schedule and budget requirements
    Providing ongoing feedback to management on deliverables
    Acquiring ongoing knowledge necessary to perform job assignments and to improve technology, products and processes
    Product support through design, manufacturing, installation, and commissioning, with travel as required to worldwide sites

    Skills:
    Highly organized, self starting, team oriented
    CAD and CAE; 3D Solid Modeling (Siemens NX preferred), AutoCAD familiarity, FEA
    Clear and effective written and oral communication with co-workers, management, manufacturers and customers
    Strong analytical skills (with emphasis on structural design), FMEA, Risk analysis
    Working knowledge of ASME Y14.5 Geometric Dimensioning and Tolerancing, ASME Y14.100 Engineering Drawing Practices , AWS D1.1 Structural Welding Code and ASME Y14.5-2009 Drafting Standards
    Proficient with Microsoft Office - Word, Excel and PowerPoint

    Education
    Design of large custom steel assemblies to withstand specified loading conditions, including material selection and specification, sheet metal, weldments, and machining and strength characteristics
    Designing in both US and SI units and materials
    Regulatory experience with CE and ATEX is a plus
    Two or four year degree in technical or engineering related discipline.
    Strong mechanical design and drafting background with a minimum of 3 years design experience

    Work Schedule
    1st Shift, 5/40
     
    Job Number: 176055
    Job Location: New Brighton, MN
    Rate: $32.61 - $37.68/hr
    Per Diem: Possible
    Overtime: yes
    Duration: 6 months
    Start Date: Now
    Input Date: 12/31/2018
    Firm Name: CHIPTON ROSS
    Attention: Patrick Costello
    Address: 420 CULVER BLVD
    City, State: PLAYA DEL REY, CA 90293
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Website: www.chiptonross.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    PIPE LINE MECHANICAL ENGINEER

    Description:
    JSG is looking for a Mechanical Engineer for a 6+ months contract opportunity in Omaha, NE!

    Description:

    Requires engineering degree in specific discipline and 0-4 years engineering experience
    Prepare designs for pipeline, meter, regulator and relief valve sizing and compression facilities
    Specify materials to be purchased to implement facility designs
    Develop project implementation schedules
    Prepare cost estimates
    Perform engineering studies involving data analysis and process flow analysis and written reports
     
    Job Number: 370734
    Job Location: Omaha, NE
    Per Diem: If Qualified
    Overtime: Possible
    Duration: 6 + months
    Start Date: ASAP
    Input Date: 01/17/2019
    Last Updated: 02/15/2019
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Linda Peck
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Engineer

    Description:
    Must Be eligible for a Clearance.

    Ability to Design and Integrate Automatic Fire Extinguishing (AFES) Subsystems and components into military vehicles is a plus
    Familiar with braking systems (service and parking) and steering used on tracked or military vehicles is a plus
    Ability to work on complex mechanisms such as articulating driver controls, articulating/multi plane displays ( shock isolation mounts/ hard mounted)
    Ability to design articulating, locking or sliding provisions to Human Factors requirements
    Ability to conduct own FEA (ANSA, Nastran and/or LS-DYNA solvers)
    Familiar with design standards and common design engineering practices used in military vehicles
    Ability to function within an integrated product team environment
    Ability to plan engineering projects, provide technical direction, perform preliminary design and analysis, and support the formulation and documentation of subsystem and component requirements
    Additional responsibilities includes , possible shop prototype trial fit activities, overview of verification test activities and overview of engineering
     
    Job Number: 45394
    Job Location: MI
    Rate: Open
    Per Diem: Split
    Overtime: Possible
    Duration: 12 mos +
    Start Date: ASAP
    Input Date: 01/09/2019
    Firm Name: PANTHER GROUP
    Attention: Marques
    Address: 5 MILL AND MAIN PL STE 430
    City, State: MAYNARD, MA 01754
    Phone: 781/790-7900
    800 Phone: 800/776-0562
    Fax Phone: 781/672-2570
    Website: www.thepanthergrp.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Engineer

    Description:
    Location: Palmdale, CA
    Duration: 9 month contract
    Shift: 1st or 2nd shift and weekends.
    Overtime: Possible (x1.5)
    Per Diem Split: Yes (if eligible)

    ****MUST be a U.S. Citizen****
    ****Bachelor's Degree or Master's Degree required****
    ****MUST have an Active Secret Clearance or to have had one within the last 2 years****

    Job Description:
    Experience with Design, Analysis, Integration and Development of aircraft Hydraulic systems for a new military aircraft design. Initial sizing and layout of various subsystems with the aircraft using CATIA V5. Collaborate with other disciplines and stakeholders to determine interfaces and systems requirements. Experience with developing performance specification. Able to interface with manufacturing team to integrate hardware, troubleshoot integration issues, and make real-time design changes. Incorporate design updates based on changes and redlines discovered during hardware integration. Experienced in installation and fabrication of new systems.


    Requirements:
    - Experience with Architecture of hydraulic systems
    - CATIA V5 experience.
    - Experience generating subsystem layouts and designs.
    - MRB experience is a plus (e.g., identifying workarounds & resolving trouble tickets).
    - Self-motivated and ability to work in a fast paced aircraft design environment.
    - Experience leading small engineering teams
    - Microsoft Office proficiency.
    - Excellent oral and written communication skills.

    Education:
    Level 3: BS+9-15 YRS or MS+7-13 YRS
     
    Job Number: 10236
    Job Location: Palmdale, CA
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 9 mos
    Input Date: 02/08/2019
    Last Updated: 03/01/2019
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Engineer

    Description:
    Description:
    Researches, plans, designs and develops mechanical products and systems such as instruments, controls, robots, engines, machines and mechanical, thermal hydraulic or heat transfer systems for production, transmission, measurement, and use of energy. Applies research to the planning, design, development, and testing of mechanical and/or electromechanical systems, instruments, controls, engines, and/or machines. Due to the variety of the work products, the candidate will need a flexible and adaptable skill set. This position will perform detailed engineering design and analysis roles. The mechanical engineer will assist in multi-functional product development for ruggedized military processing solutions, including mechanical chassis and circuit card modeling, thermal analysis and platform system integration. Must be comfortable within a rapid development environment; able to execute within short timelines and a given budget. Attention to detail, strong interpersonal skills, ability to multitask, good organizational skills, computer literacy, and a demonstrated ability to thrive in a team environment.

    Mandatory
    Creo V4, GD&T knowledge, 5 years of mechanical design knowledge, BS or MS degree in mechanical design.
     
    Job Number: 18828
    Job Location: Owego, Ny
    Rate: Open
    Per Diem: Yes
    Overtime: Yes
    Duration: 3 months
    Start Date: ASAP
    Input Date: 11/07/2018
    Last Updated: 05/09/2019
    Firm Name: ICONMA LLC
    Attention: Pritam Prince
    Address: 850 STEPHENSON HWY STE 612
    City, State: TROY, MI 48083
    Phone: 248/602-3856
    Website: iconma.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Engineer - Secret Clearance

    Description:
    Major purpose:

    Mechanical design, integration, test and production support of simulation equipment. Responsibilities include development of 3D models, detailed drawings and interfacing with manufacturing.



    Education/Experience/Licenses etc.:

    Must have an existing, active Secret Security Clearance.

    •BS in Mechanical Engineering or equivalent experience in an engineering discipline

    •Prefer 4+ years of directly related experience

    •Experience developing 3D models and detailed drawings

    •Ability to develop innovative solutions

    •Must have strong verbal and written communication skills with the ability to communicate complex issues to technical and non-technical audiences that include peers, management, and customers



    Desired Qualifications

    •Experience using SolidWorks and AutoCAD

    •Finite Element Analysis application experience

    •Familiarity with aircraft cockpit systems

    •Simulation equipment experience




    Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
     
    Job Number: 19-01330
    Job Location: Broken Arrow, OK
    Rate: 70.0USD/Hour
    Per Diem: --
    Overtime: --
    Duration: 2019-05-03 00:00:00.0
    Start Date: 2019-02-04 00:00:00.0
    Input Date: 01/10/2019
    Last Updated: 03/29/2019
    Firm Name: NESCO RESOURCE
    Attention: Kevin Lord
    Address: 101 COMMERCE ST STE 3001
    City, State: LAKE MARY, FL 32746
    Phone: 407/710-8000
    Fax Phone: 407/710-8001
    Website: www.nescoresource.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Engineer / Catia V5 / hydraulic systems - Clearance CA

    Description:
    Engineering - Mechanical Engineer
    Work Location: Palmdale, CA
    Status: Open
    Rate: Open
    Qty: 1
    Desired Start Date: 1/21/2019
    End Date: 9/27/2019

    **Position requires people experienced in hardware integration, troubleshooting, and MRB (e.g., identifying workarounds & resolving trouble tickets). The build phase is on an aggressive schedule and having additional help with help meet the schedule milestone.

    Job Description:
    Experience with Design, Analysis, Integration and Development of aircraft Hydraulic systems for a new military aircraft design. Initial sizing and layout of various subsystems with the aircraft using CATIA V5. Collaborate with other disciplines and stakeholders to determine interfaces and systems requirements. Experience with developing performance specification. Able to interface with manufacturing team to integrate hardware, troubleshoot integration issues, and make real-time design changes. Incorporate design updates based on changes and redlines discovered during hardware integration. Experienced in installation and fabrication of new systems.

    o Experience with Architecture of hydraulic systems
    o CATIA V5 experience.
    o Experience generating subsystem layouts and designs.
    o MRB experience is a plus (e.g., identifying workarounds & resolving trouble tickets).
    o Self-motivated and ability to work in a fast paced aircraft design environment.
    o Experience leading small engineering teams
    o Microsoft Office proficiency.
    o Excellent oral and written communication skills.

    **Must be able to work 1st or 2nd shift and weekends.

    Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
     
    Job Number: JE-1309-1S5
    Job Location: Palmdale, CA
    Rate: open
    Per Diem: no
    Duration: 9 months
    Start Date: 1st or 2nd shift and weekends
    Input Date: 01/31/2019
    Last Updated: 02/28/2019
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    Mechanical Engineers

    Description:
    With sustaining experience
     
    Job Location: Midwest
    Input Date: 01/14/2015
    Firm Name: ADVANCED TECHNOLOGY
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Email: annmarie@advancedtechno.com
    Website: www.advancedtechno.com

    Mechanical Engineers

    Description:
    3D CAD, FEA a plus
     
    Job Location: Southeast
    Input Date: 01/14/2015
    Firm Name: ADVANCED TECHNOLOGY
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Email: annmarie@advancedtechno.com
    Website: www.advancedtechno.com

    Mechanical Engineers

    Description:
    3D CAD, FEA a plus
     
    Job Location: Midwest
    Input Date: 01/14/2015
    Firm Name: ADVANCED TECHNOLOGY
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Email: annmarie@advancedtechno.com
    Website: www.advancedtechno.com

    Mechanical Engineers BSME -- Pro/E

    Description:
    2000 hours Pro/E
     
    Job Location: CT/IN/FL/OR
    Input Date: 01/14/2015
    Firm Name: ADVANCED TECHNOLOGY
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Email: davellino@advancedtechno.com
    Website: www.advancedtechno.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical System Design & Analysis Engineer III & IV - (OK)

    Description:
    Several openings in Oklahoma City, OK. Level 3 & 4

    Active Secret Clearance, NOT required to start.

    Supports the development and documentation of mechanical and fluid system and thermal environment requirements to establish the system design. Supports the development, maintenance or modification of system, component and installation designs/proposals to provide design documentation to downstream groups. Performs and documents analyses to validate and verify systems and components meet requirements and specifications. Contributes to supplier development, test and production activities and directs the supplier to optimize integration and achieve program goals. Supports system components'' designs/proposals standards to provide installation and detail documentation. Trains others. Works under general direction.

    - Confirms evaluation of requirements for completeness and feasibility.
    - Leads the development, maintenance or modification of system components' designs/proposals to provide installation
    and detail documentation.
    - Leads the creation of technical data packages.
    - Plans, prioritizes, delegates and tracks performance and documentation of analyses of mechanisms/components and
    systems selecting appropriate methods to validate or assess the design.
    - Performs detail design development and modification of mechanical and fluid system installations.
    - Performs spatial integration at system or component level.
    - Reviews mechanical designs against system requirements and mechanical hardware specifications.
    - Plans, prioritizes, delegates and tracks test plans, schedules, and procedures for mechanical components and systems.
    - Directs the support of various testing activities. Reviews the evaluation of test data to validate components and systems
    against design requirements and objectives.
    - Provides technical oversight of suppliers. Manages supplier development, test and production activities and directs
    supplier to optimize integration and achieve program goals.
    - Supports proposal preparation and new business development efforts.

    Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.
     
    Job Number: MechOK
    Job Location: Oklahoma City, OK
    Rate: OPEN
    Per Diem: YES
    Overtime: Possible
    Duration: 6+ Months
    Start Date: ASAP
    Input Date: 10/16/2018
    Last Updated: 01/25/2019
    Firm Name: AMERICAN CYBERSYSTEMS
    Attention: Vibhas Sadhu
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.acsicorp.com

    Mechanical Systems Design Engineer

    Description:
    Aircraft Engineering & Design--

    10+ years of engineering experience with supporting aviation systems; perform layouts and stack ups; have worked in all or most of the following activities:
    -System Engineering
    -Architecture
    -Design
    -Integration
    -Test or requirements activities
    Preferable multi-system knowledge - ECS, hydraulics, mechanics, pilot/flight controls, and propulsion; NX experience preferred

    U.S. Citizen or Permanent Residency Required

    Paid Holidays
    United Healthcare Medical Insurance
    Dental
    Vision
    Direct Deposit
     
    Job Number: 53934
    Job Location: California
    Input Date: 07/02/2018
    Firm Name: BUTLER AEROSPACE & DEFENSE
    Attention: Bernard Barrera
    Address: 2500 REDHILL AVE STE 200
    City, State: SANTA ANA, CA 92705
    Phone: 949/432-7512
    Email: bbarrera@butler.com
    Website: www.butler.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Technician CA

    Description:
    163665 Job ID# 21501BR
    Title Mechanical Technician
    Job Summary General Atomics (GA), and its affiliated companies, is one of the world’s leading resources for high-technology systems development ranging from the nuclear fuel cycle to remotely piloted aircraft, airborne sensors, and advanced electric, electronic, wireless and laser technologies.

    We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

    The Computer and Diagnostic Systems DIII-D/ITER team within the Energy affiliate company of General Atomics is seeking a talented Sr. Technician to work out of the Torrey Pines, CA office.

    DUTIES AND RESPONSIBILITIES:

    Under limited supervision, the Sr. Technician will be responsible for:•Responsible for fabrication, modification, installation, and documentation of complex laboratory, experimental or commercial equipment, including diagnostics (instruments)
    •Interprets general instructions or detailed mechanical drawings, plans sequence of assembly, maintains quality assurance documentation and prepares sketches and schematics, with a working knowledge of RF and High voltage engineering principles
    • Assist in the design and maintenance of basic lab, experimental, and commercial equipment.
    •Maintains a clean and organized work space.
    •Operates specialized equipment and/or performs tests requiring knowledge of processes pertinent to the organization, program or project.
    •Responsible for execution of a set of laboratory experiments or for a complex laboratory function.
    •Diagnoses and corrects operational problems or trouble sources in equipment or tests. Interprets basic information displayed to recognize when various operating measurements are drifting out of established parameters. Adjusts operating parameters to bring systems back to satisfactory operating conditions. Develops solutions to problems that occur including assisting in the design of specialized components.
    •May provide direction to other technicians or craft personnel in construction and maintenance of equipment, operation of tests, or laboratory.
    •Responsible for observing all laws, regulations and other applicable obligations wherever and whenever business is conducted on behalf of the Company. Expected to work in a safe manner in accordance with established operating procedures and practices.
    •Perform other duties as assigned.


    Qualifications Essential Qualifications Typically requires associate's degree or equivalent with seven or more years of experience. May substitute equivalent experience in lieu of education. Ability and willingness to work on systems which have unusual conditions such as high pressure, high voltage, high energy, cryogens, or radioactive materials. Knowledge of computer operations and applications pertinent to the field required. Must have analytical ability to read and understand detailed instructions, drawings and specifications. Communication skills necessary to write and record precise information. Special skills and expertise to use complex equipment or experimental techniques.
    Additional Qualifications - Requires Associate’s degree or equivalent, with seven or more years of experience. May substitute equivalent experience in lieu of education.
    - Ability and willingness to work on systems under unusual conditions involving high pressure gasses, high voltage, cryogens, high energy, radioactivity, etc.
    - Proficiency in 3D CAD software such as Solidworks.
    - Experience with various machining techniques (lathe, mill, CNC, etc.) and vacuum systems.
    - Skill with soldering high precision assemblies.
    - Must have analytical ability to read and understand detailed instructions, drawings and specifications.
    - Must be able to lift up to 25 lbs.
    - Communication skills necessary to write and record precise information.
    - Experience with lasers, high voltage, RF electronics and basic knowledge of physics and electrical engineering is desired.
    - Pay rate: $30-$35/hour
    City San Diego
    State California
    Travel Percentage Required 0% - 25%
    Clearance Required? No
    Work Schedule Rule 5/40

    Temp Assignment Duration (# of Days) 180
     
    Job Number: JE-21501
    Job Location: San Diego, CA
    Rate: 30-35/hr
    Per Diem: no
    Duration: 6 months
    Input Date: 01/07/2019
    Last Updated: 01/18/2019
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Test & Evaluation Engineer 3

    Description:
    Mechanical-Test & Evaluation Engineer 3

    Location: Seattle, WA
    Duration: 6+ months

    Note: Looking for Mechanical Engineer Designer with CATIA V5 experience.

    Job Description:
    Supports the development and verification of test methods. Develops detailed test procedures, and instrumentation and configuration definition, needed to perform the test and minimize risk within the constraints of the test plan. Develops solutions to calibration systems problems of limited scope and impact. Designs test hardware, software and systems to achieve test requirements. Uses analytical tools to verify the design. Analyzes, processes, and formats data to customer requirements. Reviews test data, including off-nominal data, for accuracy, quality and/or fidelity prior to delivery to customer. Prepares and publishes test reports to document test results and satisfy requirements. Presents test results internally. Archives data and reports. Trains others. Works under general direction. Mechanical Designer with CATIA V5 experience.

    Education / Experience:
    Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.
     
    Job Location: Seattle, WA
    Rate: Open
    Per Diem: Split
    Overtime: Possible
    Duration: 6 months
    Start Date: Asap
    Input Date: 10/03/2018
    Last Updated: 05/09/2019
    Firm Name: ICONMA LLC
    Attention: Mohamed Zoheb
    Address: 850 STEPHENSON HWY STE 612
    City, State: TROY, MI 48083
    Phone: 248/602-3856
    Website: iconma.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Testing Engineer

    Description:
    Job Description:
    Support 3rd Shift testing in the Integrated Test Vehicle laboratory. Responsibilities include, but are not limited to, communicating with the test team to configure, monitor and maintain the laboratory test setup (includes complex Hydraulics, Electronics and Mechanical Systems). Opportunity exists for expanded mechanical design work. This is a hands-on role that provides the opportunity to be part of a unique test team performing work class testing on advanced aircraft systems.

    Education:
    Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.
     
    Job Number: TE2018
    Job Location: Seattle, WA
    Rate: DOE
    Per Diem: Possible
    Overtime: Possible
    Duration: 6 mon
    Start Date: ASAP
    Input Date: 02/12/2019
    Last Updated: 04/05/2019
    Firm Name: AMERICAN CYBERSYSTEMS
    Attention: Shailendra Mishra
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.acsicorp.com

    Mechanical or Manufacturing Engineers

    Description:
    Project management or overhaul experience
     
    Job Location: West
    Input Date: 01/14/2015
    Firm Name: ADVANCED TECHNOLOGY
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Email: annmarie@advancedtechno.com
    Website: www.advancedtechno.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical or Piping Designer (OK)

    Description:
    Designer would be expected to have 5 to 15 years of experience.
    Refinery Background.

    Primary Functions/Responsibilities:

    Safety:
    Provide an environment and system that results in all work being conducted safely, environmentally friendly, and technically sound. All compliance requirements will be met.

    Integrity:
    Responsible, accountable, and will deliver on all commitments.

    Responsibility:
    Provide design and drafting expertise to develop, mechanical detail design packages for projects and turnarounds.

    Provide quality design packages that satisfy the Refinery Standards and Guidelines.

    Must be able to create a design schedule and complete projects in a timely manner.

    Must be able to work with very little supervision.
    Strong project and CAD experience.
    (Microstation experience a plus)
    Must be able to gather field data and measurements.
    Must be able to climb stairs and ladders.
    Strong team player.
    Will review and check vendor drawings.

    FOSTER DESIGN'S BENEFITS:
    • Working for a 54-year old company
    • Minimum 10 Paid Holidays, with no waiting period
    • Immediate 401K participation, 1 year 100% vesting schedule, matching employer contribution
    • Free Financial Consultant
    • Medical/Dental/Vision/Prescription card – BCBS
    • MetLife – Long Term Disability Insurance
    • Vacation Accrual
    • Per Diem Assignment Allowance, when applicable
    • Per Diem Split, when applicable
    • Paid Weekly (Direct Deposit)
     
    Job Number: FD-010819OK
    Job Location: Ponca City, OK
    Rate: $BOE/HR
    Per Diem: No - Possible Split
    Overtime: Possible
    Duration: 11 Months or longer
    Start Date: ASAP
    Input Date: 01/08/2019
    Last Updated: 01/08/2019
    Firm Name: FOSTER DESIGN INC
    Attention: Recruiter
    Address: 200 W DOUGLAS AVE STE 110
    City, State: WICHITA, KS 67202
    Phone: 316/832-9700
    800 Phone: 800/345-3394
    Fax Phone: 316/832-9357
    Website: www.fosterdes.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Stress Analysis Engineer

    Description:
    Plans and organizes structural analysis work at the program level to assure total compliance with structural integrity and stability requirements. Develops, integrates and documents complex or unique structural requirements to establish the system design. Coordinates with other engineering groups to establish the product''s environment. Guides product design and verifies structural integrity by defining requirements for development of analytical methods, finite element models/simulations and other analysis tools to develop the structural environment, characteristics and performance of the product. Works with customers and regulatory agencies to define certification processes that will ensure requirements are met. Reviews and approves certification results. Develops test plans and configurations, supports test execution and analyzes/reports test results to validate and verify systems and components meet requirements and specifications. Defines and organizes test programs to substantiate for customers and regulatory agencies that requirements are satisfied. Develops analytical processes/tools to improve effectiveness, quality and efficiency of the development effort. Investigates emerging technologies to develop future product designs to meet projected requirements. Works under consultative direction.

    This position requires broad traditional structural analysis skills ranging from very good hand calculation skills to finite element modeling skills and also requires significant experience in fatigue analysis, durability and damage tolerance of mainly aircraft primary and secondary metal structure. Both military and commercial Boeing aircraft experience is a definite plus as well as familiarity with applicable MIL and Boeing aircraft design/analysis specifications.

    Bachelor's degree with 14 or more years' experience, Master's degree with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study in engineering, computer science, mathematics, physics or chemistry.
     
    Job Number: SA_OK2019
    Job Location: Oklahoma City,, OK
    Rate: DOE
    Per Diem: Possible
    Overtime: Possible
    Duration: 8 mon
    Start Date: ASAP
    Input Date: 03/11/2019
    Last Updated: 03/22/2019
    Firm Name: AMERICAN CYBERSYSTEMS
    Attention: Shailendra Mishra
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.acsicorp.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Multiple Positions: Technical Designers/ Technical Analysis- Structural at Berkeley, MO

    Description:
    Technical Design (Level 1 and 2)- Position 1

    Location: Berkeley, MO
    Duration: 6+ Months

    Skill Code: 636- Structural Design

    Description:
    Uses manual or Computer Aided Design (CAD) tools to define or revise mechanical/structural engineering product definitions. Verifies accuracy of non-technical data. Gathers relevant data for root cause analysis. Produces changes to resolve discrepancies in design packages. Works under close supervision.

    Education / Experience:
    AA degree in related discipline.

    ------------------------------------------------------------------

    Technical Analysis (Level 1, 2 and 3)- Position 2

    Location: Berkeley, MO
    Duration: 6+ months

    Skill Code: 65X-Structural Analysis


    Description:
    Assists in gathering and inputting data for structural analysis, fleet structural support analysis and structural testing. Inputs and retrieves data from existing databases. Updates and maintains document libraries. Works under close supervision.

    Education / Experience:
    AA degree in related discipline.
     
    Job Location: Berkeley, MO
    Rate: Open
    Per Diem: Split
    Overtime: Yes
    Duration: 6 months
    Start Date: Asap
    Input Date: 12/10/2018
    Last Updated: 05/09/2019
    Firm Name: ICONMA LLC
    Attention: Mohamed Zoheb
    Address: 850 STEPHENSON HWY STE 612
    City, State: TROY, MI 48083
    Phone: 248/602-3856
    Website: iconma.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    N C Engineer II

    Description:
    Skills: Must be proficient NC Programming in CATIA V5. Preferred skill with CATIA V5 Programming Automation using VB/VB.NET. Experience NC Programming composite material (honeycomb), hardwood, and Lexan.

    Education and Experience Requirements: Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen (18) months of machining, planning, tool design, or related manufacturing experience.

    Position Purpose: Under general supervision, perform activities related to numerical control (NC) programming, including machining methods, tooling concepts, and programs for NC milling machines and lathes.

    Additional Functions: 1. May represent department in contacts with other departments, and may be required. to coordinate efforts with vendors or customers. 2. Assist in formulating Numerical Control policies, procedures, and specifications as required. Perform other duties as assigned.

    Other Requirements: 1. Good verbal and written communication skills required. 2. Must be able to read and interpret blueprints. 3. Familiarity with various machining methods, technical writing, and computer use. 4. Must possess good drafting, math, and geometry skills. 5. Must be proficient with Catia modeling, drafting, and Catia NC Mill function.
     
    Job Number: 142107
    Job Location: Savannah, GA
    Rate: 52.50
    Per Diem: yes
    Overtime: yes
    Duration: LT
    Start Date: ASAP
    Input Date: 01/03/2019
    Last Updated: 01/15/2019
    Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
    Attention: Anne Cameron
    Address: P O BOX 965280
    City, State: MARIETTA, GA 30066-0005
    Phone: 770/575-5855
    Fax Phone: 770/575-5856
    Website: www.hi-tecsolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    NC Engineer II

    Description:
    POSITION PURPOSE
    Under general supervision, perform activities related to numerical control (NC) programming, including machining methods, tooling concepts, and programs for NC milling machines and lathes.

    UNIQUE SKILLS
    • Must be proficient NC Programming in CATIA V5.
    • Preferred skill with CATIA V5 Programming Automation using VB/VB.NET.
    • Experience NC Programming composite material (honeycomb), hardwood, and Lexan.

    PRINCIPAL DUTIES AND RESPONSIBILITIES
    • Conduct a thorough analysis of engineering drawings, tool design drawings, and/or electronic models, to determine the optimal machining methods, selection of machine tool, and material cut size.
    • Interact with planners, tool designers, engineering, and customers as required, to finalize plan.
    • Develop cutter motion logic per operation sequence, selecting proper spindle speeds and feed rates.
    • Perform a thorough check on all aspects of the program and verify cutter paths through the utilization of Vericut.
    • Develop operator set-up sheets for numerical control machines.
    • Develop flat pattern mylars and templates as required.
    • Produce 2-D Catia tool drawings as required.

    ADDITIONAL FUNCTIONS
    • May represent department in contacts with other departments, and may be required to coordinate efforts with vendors or customers.
    • Assist in formulating Numerical Control policies, procedures, and specifications as required.
    • Must be able to read and interpret blueprints.
    • Familiarity with various machining methods, technical writing, and computer use.
    • Must possess good drafting, math, and geometry skills.
    • Must be proficient with Catia modeling, drafting, and Catia NC Mill function.

    EXPERIENCE/EDUCATION
    • Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    • Four (4) years machining, planning, tool design, or related manufacturing experience to include 2 years of experience as numerical control engineer.
     
    Job Number: 24-308
    Job Location: Savannah, GA
    Rate: $52.50/hr
    Per Diem: Yes
    Overtime: Yes
    Duration: 1 year plus
    Start Date: ASAP
    Input Date: 01/02/2019
    Last Updated: 03/05/2019
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    NC Programmer III

    Description:
    Position Purpose:
    Under minimal supervision, perform activities related to complex numerical control (NC) programming, including machining methods, tooling concepts, and programs for NC milling machines and lathes.

    Education and Experience Requirements:
    Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Four (4) years machining, planning, tool design, or related manufacturing experience to include 2 years of experience as numerical control engineer.

    Principle Duties and Responsibilities:
    • Conduct a thorough analysis of engineering drawings, tool design drawings, and/or electronic models, to determine the optimal machining methods, selection of machine tool, and material cut size.
    • Interact with planners, tool designers, engineering, and customers as required, to finalize plan.
    • Develop cutter motion logic per operation sequence, selecting proper spindle speeds and feed rates.
    • Perform a thorough check on all aspects of the program and verify cutter paths through the utilization of Vericut.
    • Develop operator set-up sheets for numerical control machines.
    • Develop flat pattern mylars and templates as required.
    • Produce 2-D Catia tool drawings as required.
    • May act as Team Leader as required, assigning work tasks, maintaining work load schedules, and setting priorities to ensure timely completion of department goals and corporate objectives.
    • Assist in training and guiding lower level engineers as needed.
    • Assist in formulating Numerical Control policies, procedures, and specifications as required.
    • Perform other duties as assigned.

    Other Requirements:
    • Strong knowledge of various machining and drafting methods, technical writing, and computer use.
    • Ability to read and interpret complex blueprints and engineering drawings.
    • Must be highly proficient with Catia modeling, drafting, and Catia NC Mill function.
    • Must have demonstrated expertise and a proven track record in support of company policies and rules, and consistently meeting objectives.
     
    Job Number: 24-350
    Job Location: Tulsa, OK
    Rate: $62.50/hr
    Per Diem: YES
    Overtime: YES
    Duration: 1 Year Plus
    Start Date: ASAP
    Input Date: 04/02/2019
    Last Updated: 05/16/2019
    Firm Name: PRECISION PERSONNEL INC
    Attention: Brandon Ferguson
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    NX Mechanical Engineer - Electric Vehicle Chassis

    Description:
    One of the world's leading heavy-truck manufacturers is looking for an NX Cad Designer/Engineer to join their team! This group is developing prototype future vehicles. You can be a part of the cutting edge of engineering and technology of these special trucks.

    Major Responsibilities:
    Responsible to create and design mounting brackets
    Create 3D solid and surfaced models
    Create assemblies and sub assemblies.
    Packaging components for fit and accessibility.
    Great to be a able to conduct FEA internally to meet program milestones and deliverable s.
    Conduct CAE analyses such as modal and vibration analyses, and other studies as required to support product development
    Perform necessary analysis support such as recommendations to improve the design for strength.
    Have PDM database structure experience
    Education:

    Must have Bachelors Degree in Mechanical Engineering.
     
    Job Number: 5006
    Job Location: Portland, ORE
    Rate: DOE
    Per Diem: Possible
    Overtime: Possible
    Duration: Long term
    Start Date: ASAP
    Input Date: 01/08/2019
    Firm Name: OLSA RESOURCES INC
    Attention: Dina
    Address: 3836 N BALLAST ST
    City, State: PORTLAND, OR 97217
    Phone: 503/608-7895
    Fax Phone: 503/608-7896
    Website: www.olsaresources.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Numerical Control (NC) Engineer II

    Description:
    Location: Savannah, GA
    Rate: $52.50/HR
    Duration: Long Term Contract

    ****MUST be a U.S. Citizen or Permanent Resident****

    Required Skills:
    - Must be proficient NC Programming in CATIA V5.
    - Preferred skill with CATIA V5 Programming Automation using VB/VB.NET.
    - Experience NC Programming composite material (honeycomb), hardwood, and Lexan.

    Education and Experience Requirements:
    Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen (18) months of machining, planning, tool design, or related manufacturing experience.

    Position Purpose:
    Under general supervision, perform activities related to numerical control (NC) programming, including machining methods, tooling concepts, and programs for NC milling machines and lathes.

    Principle Duties and Responsibilities:
    Essential Functions: 1. Conduct a thorough analysis of engineering drawings, tool design drawings, and/or electronic models, to determine the optimal machining methods, selection of machine tool, and material cut size. 2. Interact with planners, tool designers, engineering, and customers as required, to finalize plan. 3. Develop cutter motion logic per operation sequence, selecting proper spindle speeds and feed rates. 4. Perform a thorough check on all aspects of the program and verify cutter paths through the utilization of Vericut. 5. Develop operator set-up sheets for numerical control machines. 6. Develop flat pattern mylars and templates as required. 7. Produce 2-D Catia tool drawings as required.

    Additional Functions: 1. May represent department in contacts with other departments, and may be required. to coordinate efforts with vendors or customers. 2. Assist in formulating Numerical Control policies, procedures, and specifications as required. Perform other duties as assigned.

    Other Requirements: 1. Good verbal and written communication skills required. 2. Must be able to read and interpret blueprints. 3. Familiarity with various machining methods, technical writing, and computer use. 4. Must possess good drafting, math, and geometry skills. 5. Must be proficient with Catia modeling, drafting, and Catia NC Mill function.
     
    Job Number: 10195
    Job Location: Savannah, GA
    Rate: $52.50/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Input Date: 01/09/2019
    Last Updated: 02/21/2019
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Numerical Control Engineer II

    Description:
    Under general supervision, perform activities related to numerical control (NC) programming, including machining methods, tooling concepts, and programs for NC milling machines and lathes.

    Principle Duties and Responsibilities:
    • Conduct a thorough analysis of engineering drawings, tool design drawings, and/or electronic models, to determine the optimal machining methods, selection of machine tool, and material cut size.
    • Interact with planners, tool designers, engineering, and customers as required, to finalize plan.
    • Develop cutter motion logic per operation sequence, selecting proper spindle speeds and feed rates.
    • Perform a thorough check on all aspects of the program and verify cutter paths through the utilization of Vericut.
    • Develop operator set-up sheets for numerical control machines.
    • Develop flat pattern mylars and templates as required.
    • Produce 2-D Catia tool drawings as required.
    • May represent department in contacts with other departments, and may be required to coordinate efforts with vendors or customers.
    • Assist in formulating Numerical Control policies, procedures, and specifications as required.

    Requirements:
    • Good verbal and written communication skills required.
    • Must be able to read and interpret blueprints.
    • Familiarity with various machining methods, technical writing, and computer use.
    • Must possess good drafting, math, and geometry skills.
    • Must be proficient with Catia modeling, drafting, and Catia NC Mill function.

    Education and Experience Requirements:
    Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen (18) months of machining, planning, tool design, or related manufacturing experience.
     
    Job Number: 24-307
    Job Location: Tulsa, OK
    Rate: $52.50/hr
    Per Diem: Yes
    Overtime: Yes
    Duration: 1 year plus
    Start Date: ASAP
    Input Date: 01/02/2019
    Last Updated: 03/18/2019
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Operations Engineer (Tulsa)

    Description:
    Work/Lead independently to prepare, conduct, and evaluate analyses for operations process optimization and problem solving for manufacturing issues (production methods and procedures) for a specific production process (including production sequence/flow, tooling and production equipment, layout, material fabrication, assembly methods and planning).

    Education and Experience Requirements:
    • Bachelors degree in Mechanical, Manufacturing Engineering or related curriculum, or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    • 18 months Manufacturing Engineering, planning, or related technical experience. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.

    Principal Duties and Responsibilities:
    • For manufacturing process to which individual is assigned: provide and maintain detailed work instructions, drive quality improvements, efficiency improvements, material presentation enhancements, manage the daily work plan, provide metrics for quality and schedule performance, and coordinate engineering and tooling changes as required to meet Operations goals.
    • Perform RCCA analysis on quality defects average mechanic should be able to perform task first time with no rejections.
    • Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Define equipment/tooling needs and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components) to optimize production process.
    • Generate make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
    • Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
    • Investigate and assist in preparing justification for equipment and facility improvements.
    • Perform producibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering.
    • Apply statistical methods to estimate future Manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
    • Keep current on state-of-the-art manufacturing developments.
    • Incorporate Lean Manufacturing Methodology into existing and future processes.
    • Develop business case and present to management for process improvement approval.
    • Provide training to OE I as required in work methods and procedures and in the efficient and effective use of company resources to resolve work-related or quality problems.
    • Independently lead/coordinate the implementation of projects among multiple organizations.
    • Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader
    • Support all Safety, Sustainability and Ergonomic Initiatives.
    • Aid in development and maintenance of Business Continuity Plan.
    • Proven knowledge and understanding of Lean and/or Six Sigma principles and processes.
    • Ability to influence across functional disciplines.
    • Demonstrated ability to operate computerized equipment, such as personal computers, CATIA, etc.
    • Lean Specialist certification or higher preferred
     
    Job Number: 24-295
    Job Location: Tulsa, OK
    Rate: $52.50
    Per Diem: Yes
    Overtime: Yes
    Duration: 1 year plus
    Start Date: ASAP
    Input Date: 01/02/2019
    Last Updated: 01/30/2019
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Powerplant Subsystems Lead Engineer

    Description:
    Seeking a Powerplant Subsystems Lead Engineer with strong experience enabling him/her to be responsible for design, development, integration, testing and certification of the powerplant subsystems, including nacelle systems, inlet, thrust reverser, auxiliary power unit (APU) and fire protection for a supersonic business jet. The successful candidate will manage the powerplant subsystems design and system suppliers, as well as all design and certification activity required. The Powerplant Subsystems Lead Engineer will report to the Director of Propulsion IPT.

    Duties include, but are not limited to:
    • Develop powerplant subsystems design, architecture and product plans, including qualification and certification plans.
    • Provide subject matter expert level technical leadership, mentoring and guidance on both practical and theoretical aspects of powerplant subsystems.
    • Define requirements for the powerplant subsystems to ensure compliance with regulations/customer requirements
    • Provide validation and verification of powerplant subsystems requirements.
    • Perform powerplant subsystems tests and certification, and provide system and certification documentation.
    • Manage the powerplant subsystems scheduling, budget, resources and suppliers.
    • Report subsystem status to ensure milestones are met in support of the overall program schedule.
    • The selected candidate will help to define the product development strategy and lead a team of engineers and analysts in that effort.
    • She/he will prioritize the allocation of resources to meet the milestones of the program schedule, from concept through certification.

    Requirements:
    • Must be either a US citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772 and ITAR 120.12.
    • Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure/confidentiality agreement with current or former employer that would prevent you from performing the duties of the position.
    • Minimum of a Bachelor’s Degree in Aerospace, Mechanical Engineering or other relevant Engineering position.
    • Master’s degree in a technical and/or management specialty preferred.
    • 7+ years of deep, hands-on experience in Powerplant systems development, design and testing in Military, Commercial and/or business jet aircraft.
    • 2+ years of demonstrated experience leading technical resources and teams, both internally and externally, as well as both on-site and off-site.
    • In-depth and current knowledge of Part 25 regulatory requirements.
    • Experience and expertise in the development of commercial and/or high-end business jets strongly desired.
    • Recent experience in developing powerplant systems from concept through certification strongly desired.
     
    Job Number: 42-003
    Job Location: Reno, NV
    Rate: DOE but very competitve
    Per Diem: YES
    Overtime: Possible
    Duration: 1 year plus
    Start Date: ASAP
    Input Date: 01/03/2019
    Last Updated: 02/06/2019
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com