Job Search Results

831 listings were found that matched your search words: Keywords: Software ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2024/03/28 Thursday 09:21AM Pacific Time by ContractJobHunter. )

Listings 1 - 831

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer with active secret / design of mechanical and electronic interfaces / integration test / serial buses C/C++ programming CA

Description:
160459
Requirement #AERO-REQ-0666
Work Location Palmdale, CA
Work Week 9/80
Priority High
Needed Date 11/27/2017
End Date 11/09/2018
Number of Resources 1
Security Clearance Secret

Title: Aeronautical Engineer

Description

Candidate will be responsible for designing and building a system integration laboratory (SIL). This effort includes design of mechanical and electronic interfaces to support software development, integration and test efforts. Candidate will have hands-on hardware experience and software skills. Candidate will be able to troubleshoot hardware/software integration issues and perform integration and test. Define, develop, analyze and coordinate SIL requirements, allocate requirements and define interfaces between subsystems. Effort also includes flow down of requirements to procurement specifications, and management of vendor selection and vendor performance, including verification of requirements. The candidate will support system/software verification and validation effort and customer reviews during all phases of system development. The candidate will develop and support integration and system check out (SCO) procedures on flight test article and support pre-flight and post-flight analysis and reviews. Good oral and written communication skills are required as is the ability to flex and adapt in a fast-paced team environment. Complex organization and documentation skills are required.

Skill/Experience/Education

Mandatory:

Final Secret Clearance.

Hardware and software integration experience.
Demonstrated ability to design and troubleshoot mechanical and electronic interfaces to support software development and test.
C or C++ programming experience.
Experience with serial buses.

Desired:

B.S. Degree or above in an Engineering Discipline Several years of laboratory experience


Interview Required Yes
OT Allowed Yes (OT Limitation: No)
Travel No
Non-Exempt

Rates
0-4 Yrs Pay Rate: 65.00 USD
5-8 Yrs Pay Rate: 70.00 USD
9+ Yrs Pay Rate: 75.00 USD
 
Job Number: JE-0666
Job Location: Palmdale, CA
Rate: 65-75/hr DOE
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Electromechanical Engineers - Redondo Beach, CA

Description:
STS AeroStaff Services is hiring Aerospace Electromechanical Engineers in Redondo Beach, California.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• The responsibilities include mechanical design & analysis using computer-aided design (CAD), conducting packaging trades, tolerance and interference analyses, generating drawing packages & associated electronic data, and supporting the fabrication, assembly and test of the hardware

Required:

• 5 Years’ with Bachelors in Science; 3 Years’ with Masters; 0 Years’ with PhD
• A Bachelor of Science degree in a STEM (Science, Technology, Engineering or Math) discipline
• Electronic packaging, CAD, or mechanical design experience in an aerospace environment
• Demonstrated technical skills with experience supporting a multi-disciplined team
• Experience working with different partners across organizations and programs
• Proficient in performing tolerance and interference analyses
• Experience in generating and releasing product detail and assembly drawings
• Experience with PTC Creo / Intralink software applications

Desired:

• A Master’s Degree in Mechanical or Aerospace Engineering and 4+ years’ of engineering experience in an aerospace environment
• Experience with electronic packaging / mechanical design for airborne & space applications
• Electronics design development and sustaining experience spanning cradle to grave
• Experience with Enovia PLM software application
• Proficiency with electrical design, electronics manufacturing processes and qualification activities
• Familiarity with research and development of advanced packaging technologies
• Active Clearance

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 41401
Job Location: Redondo Beach, CA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineering Design Checkers - Lexington, KY

Description:
STS AeroStaff Services is hiring Aerospace Engineering Design Checkers in Lexington, Kentucky.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Examines engineering drawings and related documents for soundness, efficiency, and simplicity in design; completeness, clarity, and dimensional accuracy; correctness of materials and processes; conformity to design/drafting standards, design specifications, and practicability; and economy of fabrication, assembly, and installation
• This position will support engineers in the review of design data that will comply with applicable military specifications, SAE, ANSI, ASME, and other related standards
• This position will be responsible for reviewing drawings for formatting errors and working with the engineering team to ensure a high level of quality in the design data
• This position will also be responsible for reviewing change documentation and its related incorporations for completeness and correctness
• This position will help develop a set of common Design Standards that meets our Customers and Program requirements
• This position will be expected, at times, to be involved with the drawing creation and subsequent Production review processes

Basic Qualifications:

• Familiarity with SAE AS50881 and ANSI/ASME Y14.100 or related design and drafting standards
• CATIA V5 experience
• Familiarity with Change Documentation process and all related requirements to this process, Microsoft office suite (Word, Excel, PowerPoint)

Preferred Qualifications:

• Teamcenter or similar PDM/PLM software tool
• Experience working in an aerospace environment with exposure to or interface with DoD customers
• AutoCAD or other 2D drafting program

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 41422
Job Location: Lexington, KY
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Data Entry Operators - Orlando, FL

Description:
STS AeroStaff Services is hiring Aircraft Data Entry Operators in Orlando, Florida.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Maintains aircraft and engine logbooks and associated records
• Proficient performing all operator, data entry and retrieval functions associated with aircraft recordkeeping
• Performs networking functions between individual stations, including analysis and correction of errors caused by software, hardware or data entry
• Transmits and receives data via floppy disk, modem and other electronic means
• Extracts data, formulates and interprets management reports, creates archives, backups, and data saves in support of Station Aircraft Maintenance operations
• Performs a wide range of clerical and administrative duties related to aircraft maintenance, such as preparing reports and correspondence, filing and typing, performing data base and systems analysis
• Performs requirements in accordance with the procedures established in by the customer

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 39849
Job Location: Orlando, FL
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Kitting Technicians - Atlanta, GA

Description:
STS AeroStaff Services now offers Aircraft Kitting Technician jobs in Atlanta, Georgia.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

Under the direction of the Logistics Supervisor, the Kitting Clerk will assemble Aircraft Parts and interior Integration kits using released engineering design data and parts lists.

Job Duties:

• Read and understand released engineering data to include parts lists, drawings, test plans and service bulletins
• Maintain correct revision level of manufactured parts and parts lists
• Ensure parts and installation kits are properly identified and labeled
• Ensure proper certification paperwork is maintained with parts throughout kitting process
• Perform work in a neat and organized manner within estimated or budgeted hours while maintaining high standards of quality
• Operate necessary equipment for the packaging of parts and kits
• Complete all required paperwork for kitting and certification
• Safely operate forklifts (sit down and standup), pallet jacks and hand trucks
• Perform all other duties assigned by Logistics Supervisor or Supply Chain Planning Manager
• Maintains continuity among work shifts by documenting and communicating actions, irregularities, and continuing needs in job turnovers
• Documents actions by completing production and quality logs
• Updates job knowledge by participating in educational opportunities (offsite / off-shift training) and continuous self-improvement through trade publications
• Accomplishes organization goals by accepting ownership for accomplishing new and different requests (cross training), exploring opportunities to add value to job accomplishments
• Comply with lean manufacturing principles and work with leads and supervisors to explore and implement best practices in the manufacturing process
• Maintains safe operations by adhering to safety procedures and regulations

Qualifications:

• High school diploma or equivalent, completion of vocational training or an apprenticeship will be an asset
• Experience in performing Kitting in a manufacturing type of environment preferred
• Familiarity with STC, Conformity, and PMA part requirements preferred
• Able to use manual hand tools (i.e. hammer, drill, pry bar, etc.)
• Previous forklift experience or the ability to learn how to operate forklifts
• Must be able to read and understand released engineering data, parts lists, drawings, test plans and service bulletins
• Must be a self-starter requiring minimum supervision and able to perform job assignments with a very high degree of accuracy
• Should have knowledge of typical PC/business software applications (i.e. Word, Excel and Internet)
• Must have excellent interpersonal skills and be able to interact with a wide variety or people
• Must be able to work in a fast paced environment and maintain a high quality of work
• Must be able to work flexible shifts to include overtime and weekends (as needed) in order to meet customer schedules and needs of other departments
• High level of manual dexterity and detail orientation
• Able to manufacture aircraft interior parts and assemblies in accordance with released data
• Good oral and written communication skills; able to read, comprehend and create written and verbal instructions in the English language

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 41354
Job Location: Atlanta, GA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Records Specialists - Dallas, TX

Description:
STS AeroStaff Services is hiring Aircraft Records Specialists in Dallas, Texas.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Schedule:

Wednesday-Saturday, 6:00am-4:00pm

Job Summary:

Responsible for processing the retention of all Maintenance Records into the imaging system and ensures the documents are maintained permanently in accordance with procedures and FAA regulations.

Job Duties:

• Accomplishes imaging needs and requirements (eg. SIS scanning/indexing/verifying)
• Assists research Teams (such as AD Compliance, Mx Programs, Mx Program Compliance, and Engineering) with locating documents
• Works as liaison to outsourced vendors and facilities regarding package/paperwork reciepts and/or uploading for FTP retrieval
• Performs data entry into databases (eg. engine oil consumption, engine trends, work package lifecycle, overtime info)
• Ensures maintenance packages and paperwork are received into Records and distributed to appropriate personnel
• Responsible for Records mail pick-up and basket distribution duties
• Audits maintenance packages of work accomplished, log page discrepancies and deferred maintenance items. (eg. MCAUDIT)
• Reviews documentation of maintenance accomplished for proper sign-off
• Reports all errors to CASS as appropriate
• Performs the removal and installation of on condition and hard time components
• Assists in monitoring correction requests, Records email box and other problem issues for Tech Ops
• Works on special projects for other Teams when necessary

Qualifications:

• High School Diploma required; Associates or Bachelor’s degree preferred
• Minimum 6 months’ experience in aviation records preferred
• Prior work experience or training performing document imaging preferred
• Must be able to work from seated and standing positions for long periods of time
• Must be able to read review, and accurately apply and categorize technical documents, understand office procedures and follow instructions
• Must be able to operate document imaging equipment and use a computer tools
• Must be able to work under tight time constraints to accomplish daily assignments and projects
• Must be able to utilize Microsoft Office software; specifically Excel and Outlook
• Must be able to accurately and efficiently review and enter data into computerized systems
• Strong desire and ability to work in a technically oriented environment
• Must possess good organizational and communication skills
• Must have the ability to manage interruptions, prioritize responsibilities and work in a fast paced environment
• Must have a positive attitude and be a Team player
• Must maintain the confidentiality of proprietary information handled in daily tasks
• Must be able to work a flexible schedule with day, night and weekend duty and holiday work
• Prior work experience and/or familiarity with aircraft maintenance terms and documentation preferred
• Excellent organization skills and time management
• Must work under tight time constraints to accomplish assignments and projects

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 41501
Job Location: Dallas, TX
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Records Specialists - Houston, TX

Description:
STS AeroStaff Services now offers Aircraft Records Specialist jobs in Houston, Texas.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Purpose:

The Aircraft Records Specialist is responsible for data entry, audits, and updates of daily production documentation by the maintenance organization.

Job Duties:

• Audits maintenance packages of work accomplished, log page discrepancies and deferred maintenance items
• Reviews documentation of maintenance accomplished for accuracy, proper sign-off and compliance
• Performs the data entry in the Maintenance Activity Communication History module of the maintenance computer system
• Performs the removal and installation of components in the Component Control System module of the maintenance computer system
• Reviews and Updates documentation pertaining to AD's and modification compliance in the Modification Control System module of the maintenance computer system
• Ensures all scheduled maintenance has been audited for proper sign-off and updated in the system prior to the release of the aircraft
• Audit vendor airworthiness certification and enter work accomplished into the maintenance computer system
• Maintains aircraft and engine flight hours and cycles utilization reports, master log reports, and engine oil consumption reports
• Maintains historical records in the mainframe database for components, maintenance activity and communication and modification compliance
• Responsible for the retention of all aircraft maintenance records into an imaging system and ensure the documents are maintained permanently in accordance with standards and FAA regulations
• Processes engine, APU, and gear assembly build ups and teardowns documentation from vendor and shop locations
• Produces Aircraft Records specification reports when requested from outside parties
• Monitor correction requests
• Interact with Planning, Records, Reliability, Production and Engineering departments
• Responsible for verifying the accuracy of maintenance databases through various reports
• Submits recommendations for process improvements and assists Records Analyst in training new Employees

Qualifications:

• High school diploma or equivalency required; minimum two year college is preferred
• Minimum two years’ in the aviation industry (Records, Planning, Reliability, or Production) is preferred
• Must be able to master PC software packages including Microsoft Excel/Word/Access applications
• Experience working with an imaging system software is a plus
• Experience working with the Maxi-Merlin main frame application is a plus
• Ability to learn to read technical documents, follow instructions, and understand office procedures
• Must have vision ability sufficient to view and read computer monitor on a frequent basis
• Must be able to lift 30 pounds and drive on secured airport property
• Must be able to comply with Company attendance standards as described in established guidelines
• Must meet confidentiality expectations as to confidential, proprietary and sensitive Company information
• Must have a valid driver's license at time of hire and be comfortable driving at night
• Candidate must be able to type 40 WPM, detailed oriented, self-starter, dependable, able to multi task, work in a close environment with a Team and able to work productively with little supervision

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 41218
Job Location: Houston, TX
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Applications Engineer - Level 3

Description:
Location: Lexington, KY
Rate: $55.00 - $65.00/HR
Duration: 9 month contract
Shift: 1st Shift
Overtime: Exempt

*****MUST have an Active Secret Clearance or to have had one with the last 2 years*****

Job Description:
- This is a mid-to-advanced career position (5 to 15 years of experience) for a SharePoint Administrator on a Department of Defense (.mil) network.
- The SharePoint Admin will be responsible for managing the daily operations and milestone events (e.g. troubleshooting, patches, data backup, and upgrades) for the collaboration tool at the Special Operations Forces Support Activity (SOFSA) contract in Lexington, Kentucky.
- She / he will be part of the IT department and will work with the user community (mainly back office operations such as contracts administration, quality assurance, and procurement) to ensure the software meets the needs of the overall contract.
- This includes, but is not limited to, configuration settings, and workflow / report design and support.
- A primary responsibility will be to upgrade the current SharePoint instance from 2010 to 2013.
- This is not a remote position.
- Personal Portable Electronic Devices (e.g. cell phones) are not allowed in the facility.

Skill/Experience/Education
Mandatory:
*****MUST have an Active Secret Clearance or to have had one with the last 2 years*****
- 5+ years of experience with SharePoint 2010 and 2013 Administration (Server Side)
- 5+ years of experience with PowerShell Scripting
- Security + certification
- MCSE certification

Desired:
- Nintex Workflow, Active Directory, Basic SQL Experience, Windows Administration, SQL Server Reporting Services, Internet Information Services
 
Job Number: 8599
Job Location: Lexington, KY
Rate: $55.00 - $65.00/HR
Per Diem: Split Possible
Overtime: Exempt
Duration: 9 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Associate Program Manager

Description:
SUMMARY
Supports Program Manager with all aspects of Program Management.

ESSENTIAL DUTIES AND RESPONSIBILITIES
• Comprehends contractual obligations and statement of work for assigned program(s) and provides guidance based on these documents to other program team members as required.
• Participates in program planning and documenting.
• Develops and maintains status and visibility tools.
• Assists with oversight and coordination of vendor activities and communication.
• Comprehends and monitors assigned aspects of a program and report status.
• Coordinates or assists with coordinating program reviews and meetings.
• Coordinates program related travel as required.
• Organizes and facilitates communications between the customer and appropriate GTI personnel.
• Provides leadership and coordination of team-based solutions to program issues.
• Develops methods and procedures for managing programs.
• Assists or takes primary role in developing or administering program change orders.
• Assists with part procurement and status as required.
• Assists in maintaining program financial health tools.
• Participates in risk identification and risk mitigation activities.
• Assists with final inspection (closing process) as required.
• Responsible for ensuring that assigned small-scale projects progress on schedule within budget and meets or exceeds minimum quality standards; this may include post delivery support.
• Assists in preparing and maintaining departmental policies, procedures and reporting.
• Maintains regular attendance including being at work, being on time to work and working full shifts.
• Other duties as assigned.

COMPETENCIES
To perform the job successfully, an individual should demonstrate the following competencies:

CORE COMPETENCIES
• Adaptability - Adapts to changes in the work environment, manages competing demands, and accepts constructive criticism/feedback and changes approach or method to best fit the situation.
• Communications - Expresses ideas and thoughts effectively in verbal and written form, exhibits good listening and comprehension, keeps others informed and uses appropriate communication methods.
• Dependability - Responds to requests for service and assistance, follows instruction and responds to management direction, takes responsibility for own actions and doing the best job possible, keeps commitments, and maintains reliable attendance.
• Initiative - Sets and achieves challenging goals, demonstrates persistence and overcomes obstacles, measures self against standard of excellence, recognizes and acts on opportunities, and takes calculated risks to accomplish goals.
• Teamwork - Balances team and individual responsibilities, exhibits objectivity and openness to others' views, gives and welcomes feedback, contributes to building a positive team spirit, and puts success of team above own interests.
• Work Quality - Demonstrates accuracy and thoroughness, displays commitment to excellence, looks for ways to improve and promote quality, applies feedback to improve performance, and monitors own work to ensure quality.

JOB CORE COMPETENCIES
• Customer Service – Displays courtesy and sensitivity, manages difficult or emotional customer situations, meets commitments, responds promptly to customer needs, and solicits customer feedback to improve service.
• Planning & Organization – Prioritizes and plans work activities, uses time efficiently, plans for additional resources, integrates changes smoothly, sets goals and objectives, and works in an organized manner.
• Productivity – Meets productivity standards, completes work in timely manner, strives to increase productivity, works quickly and achieves established goals.
• Relationship Building –Builds rapport up, down, and across the organization, establishes collaborative relationships to achieve objectives, seeks win-win solutions to conflict, develops network of professional contacts, and displays empathy and tolerate diverse viewpoints.

SUMMARY OF EDUCATION, EXPERIENCE & CERTIFICATION
Bachelor's degree (B. S.) in Engineering or a related discipline from a four-year college or university and a minimum of four years related experience and/or training, or equivalent combination of education and experience. Aerospace background and aircraft interior industry experience preferred.

Employees working on programs subject to International Traffic in Arms Regulations must qualify as a US Person which is defined as a US Citizen, a Permanent Resident who does not work for a foreign company/foreign government/foreign governmental agency or organization, or a political asylee for legal compliance purposes.

REQUIRED KNOWLEDGE, SKILLS & ABILITIES
• Ability to work well independently and cross-functionally as part of an established and growing team.
• Demonstrates the interest and ability to grow within the program management function.
• Displays sound judgment, problem-solving skills and ability to function independently to accomplish tasks with minimal supervision.
• Strong communication, time-management and problem-solving skills.
• Ability to read, analyze and interpret the most complex documents.
• Ability to respond effectively to the most sensitive inquiries or complaints.
• Ability to write speeches and articles using original or innovative techniques or style.
• Ability to make effective and persuasive speeches and presentations on controversial or complex topics to top management, public groups and/or boards of directors.
• Ability to apply principles of logical or scientific thinking to a wide range of intellectual and practical problems.
• Ability to deal with nonverbal symbolism (formulas, scientific equations, graphs, etc.) in its most difficult phases.
• Ability to deal with a variety of abstract and concrete variables.
• Demonstrated experience with Accounting, Database and Project Management software.
• Proficient in Microsoft Office applications with advanced Excel skills.
• Ability to sit for extended periods of time, use hands to lift and/or move up to 10 pounds, occasionally lift and/or move up to 25 pounds, and have close/color vision ability to adjust focus.
• Ability to travel as required.
• Ability to work outside of core business hours as required.
 
Job Number: 18-811
Job Location: Northwest
Rate: OPEN
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aviation Quality Inspectors - Spokane, WA

Description:
STS AeroStaff Services is now hiring Aviation Quality Inspectors in Spokane, Washington.

We offer a competitive salary, amazing employee benefits and an excellent commission’s package alongside the opportunity to work with some truly incredible people.

Job Summary:

This Role will be tasked to utilize their seasoned skills to be effective, efficient and productive on a daily basis. Quality Inspectors will be expected to work as a cohesive unit to manage all quality control aspects of aircraft maintenance, aircraft painting, material and tooling acquisition, and administration of maintenance and training records, as well as assist in creating an atmosphere of communication, collaboration and teamwork.

Job Duties:

• Continuing Education of CFRs such as Part 145, 121, 65 and Part 43
• Coordination of External Audit Inspections, Reports, Corrective Actions, and Responses
• Coordination of Customer Inspector Training and Certification Requirements
• Organizational Skills to Function Properly in a Fast Paced Industrial Environment
• Qualification Validation and Appointment for Interim Quality Manager to Support Organization During Extended Period Absences
• Ensure that Work Orders are Completed Per Established Inspection Procedures and Sign Air Worthiness Releases
• Ensure that Inspection Items are Compliant and Complete
• Ensure that Parts Tags are Filled Out and Processed Properly with Proper Tag Attached
• Support Records Supervisor with Controlling and Auditing Work Orders
• Perform Receiving, Preliminary, In-Process, Hidden Damage and Final Inspections
• Provide Training (Initial and Recurrent) to Site Employees
• Perform Quality Assurance Audits and Routine Surveillance of In-Process Work
• Manage the Internal Quality Audit Program
• Review Inspection Forms and Paperwork for Proper Completion
• Serve as the Alternate Repair Station Point of Contact for the FAA
• Survey and Approve Potential Materials and Service Vendors

At STS AeroStaff Services, we treat our employees like family. We nurture and guide their careers down the path of success and promise to work with them every step of the way to ensure prolonged professional happiness and complete job satisfaction.

Qualifications:

• High School Diploma or GED (required)
• Bachelor’s Degree in Industrial Engineering, Operational Management, General Business, Etc. (preferred)
• Experience in Lieu of College Education (consideration)
• Minimum of 5 Years’ Experience in the Aviation Quality/Inspection Area with a Large Organization
• Ability to Wear Full Face Respirators, Coveralls and Fall Restraint Equipment
• Ability to Pass a DOT Drug and Alcohol Test
• Ability to Pass a 10 Year Background Check and Obtain TSA Airport Badge
• Ability to Work a Variety of Shifts Based on Company and Client Needs
• Current FAA A&P Certificate (validation verified)
• Current Software Skills such as MS Office Suite, Outlook, SharePoint, etc.
• Experience Designing, Developing, Implementing and Training Program Related Items
• Experience with Lean Production, TQM, and/or Six Sigma Work Environments
• Ability to Communicate Effectively with a Variety of Methods (Verbal, Written, Presentation, Etc.)
• Achieve Compliance Goals: 1. Customer Pick-Up Rate of 15/Aircraft; 2. Customer Satisfaction Rate of 4.5 for Quality Category; 3. Indirect Labor Hours of 110% or Less; 4. Corrective Action Completion Rate of 95% On-Time
• Manage the Administration of Manuals: Repair Station, Quality Control, Repair Station Training, Operations Specifications and the Quality Management System
• Creation of Standardized Reporting of Service Risks, Major Repairs and Unapproved Parts in Accordance with Applicable Regulations
• Evaluation of Inspector and Designated Inspector Qualifications and Authorization to Perform Appropriate Inspection
• Ensure that all Aircraft Maintenance Meets FAA, Customer, Company and/or Manufacturer Specifications

Not only is STS AeroStaff Services widely considered one of the premiere staffing organizations in the country, we’ve also been honored with multiple awards recognizing us as innovators and leaders throughout the recruiting industry.

If you or someone you know is interested in learning more, we encourage you to share this post across your social media channels or simply apply on this page. For questions, please call 1-877-707-5767.
 
Job Number: 41370
Job Location: Spokane, WA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
BIT Engineer (Built in Test Engineer)/ DoD Clearance Required

Description:
Job Title: BIT Engineer (Built in Test Engineer)/ DoD Clearance Required
Location: Compton, CA
Duration: 12 months
Pay Rate: $125/ hour

**DoD Secret Clearance is required**

Description:
The Software Engineering Center is seeking a Built in Test Engineer to work on next gen Tactical Airborne Sensor System.

Job Description:
Applicant needs to have experience with Real Time Embedded Systems in regard to Built-In-Test (BIT). The BIT suite of applications will need to provide confidence for correct operation of each module in various subsystems.

Required Skills:
• Startup-Up BIT (SBIT): Comprehensive testing of hardware and functionality during system startup. Needs to identify subsystem and module in the case of failure.
• Initiated BIT (IBIT): Manual BIT (intrusive). Halts current application and runs comprehensive tests and failure identification on system/module.
• Periodic BIT (PBIT): Non-intrusive tests that can be run while other applications are active.

Desired Skills:
• Device Driver
• Board Support Package
• Ability to use a logic analyzer and/or oscilloscope
• Knowledge of EO/IR and RADAR systems

Required Education:
• B.S. Engineering Degree in either Computer Science or Electrical Engineering

Additional Job Details:
• DoD Secret Clearance is required
 
Job Number: 382771
Job Location: Compton, CA
Rate: $125/ hour
Per Diem: none
Overtime: yes
Duration: 12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: CDI CORPORATION
Attention: Jason Greer
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Business System Analyst

Description:
We are seeking for a Business System Analyst for this National company located in Bend, Oregon.

This role will leverage appropriate Business Systems Analysis tools/solutions based on the standards/best practices of our client. This position requires minimal supervision delivering outcomes, significant breadth/depth of job specific knowledge and significant level of service delivery, professionalism, and communication.

The Business Systems Analyst (BSA) and/or Technical BA is responsible for:
Performing application process definition
Technical application modeling
Requirements gathering and analysis capabilities to help identify and understand how software and hardware systems are currently fulfilling needs and/or gaps
Participation in working groups and/or as part of PMO led projects
Project
Completing the IT application and software model as it relates to the supply chain function.
Socialize model and fit/gap recommendations where application/hardware support should be handled - i.e. changes to organization support and roles/responsibilities to be successful
Aid in any transition of Supply Chain applications/hardware support into the IDS organization
Establish a Technical supply chain roadmap and strategic plan
 
Job Location: Bend, ORE
Per Diem: Possible
Overtime: Yes
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CAE Engineer

Description:
Description:


BS Degree in ME/AERO. Minimum of 6+ years of industry experience as CAE analyst and specific solver software usage depending on department specialty area. Minimum of 5 years of experience using pre-processor / post-processor tools (Hyperworks) for complex vehicle system level CAE model construction, visualization, and analysis. Related advanced degree may be substituted for 2 years of experience.

Requirements for a CAE Analyst:

- Strong vehicle dynamics and chassis control background (education and project experiences) with focus on handling, traction, stability, braking control systems.
- Must be proficient in popular vehicle dynamics software such as CarSim, control simulation tools such as MATLAB/Simulink as well as rapid control prototyping platforms such as dSPACE RTI/ControlDesk, and be able to create and debug models/codes including chassis control logic algorithms.
- Integrate controller models into vehicle simulation platforms for SIL and HIL bench setups and applications.
- Validate accuracy of simulation models by comparing to test data.
- Predict handling, braking and chassis control system responses, assess control system fail-safe/ISO26262 characteristics using SIL, HIL and DIL setups, and develop countermeasure to get desired performance while guaranteeing robustness.
- Must be able to develop modeling and simulation methods, produce customer-oriented results and explain them from root cause standpoint.
- Must be able to work independently, and be willing to deal with fast changing environment.
- Must be able to maintain schedule and stay focused on priorities.
- Min. Bachelor Degree in Engineering and more than 2 years vehicle dynamics modeling/simulation experience.

- Some experience in any of the following vehicle dynamics modeling/control systems is a plus: TargetLink, SIMPACK, ADAMS/Car, VSM, CarMaker
 
Job Number: NSR10008CAE
Job Location: Columbus Area, OH
Rate: Open
Per Diem: No
Overtime: Straight
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NSR GROUP
Attention: Mariko Akiyama
Address: 655 METRO PL S STE 600-44
City, State: DUBLIN, OH 43017
Phone: 614/798-0671
Fax Phone: 614/439-4932
Website: www.nextsr.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CMM Inspector

Description:
Major purpose:
Programs, sets up and operates Coordinate Measuring Machines (CMM) in order to make complex, precise measurements of the requisite materials and parts. The individual performs visual and dimensional inspection on parts to determine their accuracy to parts specifications. Training and mentors other CMM operators in CMM inspection techniques.

Essential Duties and Responsibilities:
• Sets up and operates CMM in order to make complex, precise measurements of parts.
• Reads and interprets specifications, blueprints, and models for product tolerances and dimensions.
• Verified conformance of parts to specifications and blueprints with respect to measurements.
• Provide manufacturing with 1st piece and in-process data to ensure parts conformance.
• Interprets measurement output data and graphic data.
• Work with engineering, machinists and quality assurance personnel to trouble shoot, research and solve technical problems.

Education/Experience:
• Technical certificate in related field required, Associate degree preferred.
• Must have a minimum of 5+ years’ experience in a manufacturing – aerospace environment.
• Must have good communications skills, written/verbal, with all levels of personnel.
• Must have excellent computer skills.

Special Skills:
• Proficient in coordinate measuring machine techniques and application.
• Must have knowledge and ability to operate CMM’s using PC-DMIS software.
• Knowledge and familiarity with Polyworks and/or Verisurf is also preferred.
• Ability to read, understand and interpret blueprints and other technical data including geometric dimensioning and tolerances.
• Proficient in AS9102 FAI reporting.
• Net-Inspect experience beneficial.
• Proficient in use of precision measuring tools.
• Strong mathematical and mechanical skills.
• Working knowledge of manufacturing processes, CNC equipment, quality standards and rework processes.
• Experience with quality systems and their application.
• Must have problem solving skills and experience.
 
Job Number: 40-002
Job Location: Crestview, FL
Rate: $30 - $35
Per Diem: Yes
Overtime: Possible
Duration: 6 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Programmer

Description:
Job Title: Numerical Control Programmer

Location: St. Louis, MO

Duration: Long term 24+ months

Pay Rate: $60/ hour

Job Description:

To define, plan, design and refine fixtures, data and processes necessary to facilitate and control the manufacture of products in the St. Louis facilities.
Plans, creates, verifies and revises machine control data and documentation that direct the operation for multi-axis numerically controlled machines and robots required to manufacture and inspect complex parts and tools.
Provides numerical control, machining and programming technical expertise to cross-functional engineering and manufacturing team.
Establishes technical requirements for manufacturing and producibility.
Defines and designs complex fixtures used to manufacture or inspect parts.
Plans, guides and facilitates the development and integration of new machining techniques and manufacturing methods or inspection techniques, processes and software.
Continuously improves the quality of manufacturing processes and supplier-provided work

Experience and Qualifications:

Over four (4) years of recent N/C Programming experience, using CAD/CAM systems to analyze and modify part models and produce programs required.
Aerospace manufacturing experience required.
3, 4, and 5-axis NC programming for milling parts.
Structure parts (e.g. spars, ribs, skins, bulkheads and nacelle fittings)
High speed aluminum and /or titanium machining experience.
Vericut 7.XXX simulation minimum experience.
CATIA V5 R2014 minimum experience.
Familiarity with Windows environments and office tools.
Machinist experience preferred.

Education:

Associate’s Degree in N/C Programming, Manufacturing Technology or equivalent preferred. Bachelor’s Degree in Manufacturing Technology or related field preferred.
Combination of education and experience may be considered in lieu of degree.

Physical Demands:

Typical machine shop work environment and physical expectations
 
Job Number: 382791
Job Location: St Louis, MO
Rate: $60/ hour
Per Diem: none
Overtime: yes
Duration: Long Term/ ongoing
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: CDI CORPORATION
Attention: Jason Greer
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Programmer IV

Description:
CNC Programmer IV

Location: Canoga Park, CA
Rate: DOE
Duration: 1 year contract
Shift: 1st Shift

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

** Phone AND In-Person interviews are required. Candidates must be able to attend an in-person interview at their own expense **

Duties:
Must show this experience on resume:
** Siemens NX9-NX11 NC Programming experience is required **
** DMU Mori with Siemens 840D Experience; Specifically DMU80 FD and DMU65 **
** Expertise in Lathe, Millturn, and 5 axis Mill programming of high temp alloy materials **

50% - The NC Programmer is responsible for writing new CNC programs, setup instructions, estimating and making changes to existing CNC programs. Will develop, write and maintain NC programs for complex aerospace components using engineering models, drawings and specifications to support a zero defects machining operations environment. Selects program routines for the most efficient machining methods for each part. Will be involved in the prove out of new technology, first article inspection, fixture design, and day to day programming using Siemens NX9-NX11 CAM.
10% - Analyzes engineering models/drawings to define the sequence of machining operations to ensure that the design intent and component quality is achieved.
5% - Make proper cutting tool selections, taking into consideration such factors as materials, speeds, type of cutters, feeds and control system imitations.
10% - Use machine simulation and optimization software to troubleshoot/validate CNC programs and ensure highly efficient and 100% defect-free FTT machining processes.
10% - Modify existing parts programs for engineering changes or program improvements.
5% - Work closely with Machinists, Quality, Engineering, Management and other team members.
5% - Develop, write and maintain type II probe and logic macros to perform on machine touch probe measuring, fixture updates, cutter offset updates, and part feature data collection.
5% - Participate in knowledge sharing and cross training activity within the NC programming group.

Skills:
** Siemens NX9-NX11 NC Programming experience is required **
** DMU Mori with Siemens 840D Experience; Specifically DMU80 FD and DMU65 **
** Expertise in Lathe, Millturn, and 5 axis Mill programming of high temp alloy materials **

Preferred Requirements:
-NX Post Builder expertise
-NX Machine tool Configurator expertise
-Vericut Machine Builder expertise
-Fanuc custom macro programming expertise
-Siemens 840D macro programming expertise

Education:
- Bachelors degree or equivalent experience.
 
Job Number: 7811
Job Location: Canoga Park, CA
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Programmer IV CA (local only)

Description:
Job Title: CNC Programmer IV
Keywords:
Number of Positions: 1

Remaining Positions: 1

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **





Required (Please screen for these three items and make sure the experience is accurately reflected on resumes):



** Siemens NX9-NX11 NC Programming experience is required **

** DMU Mori with Siemens 840D Experience ; Specifically DMU80 FD and DMU65 **

** Expertise in Lathe, Millturn, and 5 axis Mill programming of high temp alloy materials **



** Candidates above the maximum bill rate will be considered. Please make sure that they are submitted at rates commensurate with their qualificaitons **



** Phone AND In-Person interviews are required. Candidates must be able to attend an in-person interview at their own expense **

50% - The NC Programmer is responsible for writing new CNC programs, setup instructions, estimating and making changes to existing CNC programs. Will develop, write and maintain NC programs for complex aerospace components using engineering models, drawings and specifications to support a zero defects machining operations environment. Selects program routines for the most efficient machining methods for each part. Will be involved in the prove out of new technology, first article inspection, fixture design, and day to day programming using Siemens NX9-NX11 CAM.
10% - Analyzes engineering models/drawings to define the sequence of machining operations to ensure that the design intent and component quality is achieved.
5% - Make proper cutting tool selections, taking into consideration such factors as materials, speeds, type of cutters, feeds and control system imitations.
10% - Use machine simulation and optimization software to troubleshoot/validate CNC programs and ensure highly efficient and 100% defect-free FTT machining processes.
10% - Modify existing parts programs for engineering changes or program improvements.
5% - Work closely with Machinists, Quality, Engineering, Management and other team members.
5% - Develop, write and maintain type II probe and logic macros to perform on machine touch probe measuring, fixture updates, cutter offset updates, and part feature data collection.
5% - Participate in knowledge sharing and cross training activity within the NC programming group.








Skills:
Required (Please screen for these three items and make sure the experience is accurately reflected on resumes):



** Siemens NX9-NX11 NC Programming experience is required **



** DMU Mori with Siemens 840D Experience ; Specifically DMU80 FD and DMU65 **



** Expertise in Lathe, Millturn, and 5 axis Mill programming of high temp alloy materials **



Preferred Requirements:

-NX Post Builder expertise

-NX Machine tool Configurator expertise

-Vericut Machine Builder expertise

-Fanuc custom macro programming expertise

-Siemens 840D macro programming expertise

Education:
Bachelors degree or equivalant experience.

Skills:
Required
SIEMENS NC PROGRAMMING LATHE

State/Province: California
City/Town: Canoga Park

Start Date: 01/29/2018 Hours Per Week: 40.00
Est. End Date: 01/29/2019 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7332297
Job Location: Canoga Park, CA
Rate: 46/hr
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Programmers - Atlanta, GA

Description:
STS AeroStaff Services now offers CNC Programmer jobs in Atlanta, Georgia.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

Under the direction of production management, the CNC Programmer will generate CAM code programs for a variety of CNC machines, Point drawings, and machine set ups. The programs generated will produce or repair precision aircraft parts using multiple types of CNC equipment, accurate measurement tools and portable coordinate measuring equipment.

Job Duties:

• Plans machining operation by generating CNC G&M code programs/point drawings and machine set-up sheets by studying work orders, engineering orthographic drawings, engineering work instructions, materials, specifications, reference planes, locations of surfaces, and machining parameters interpreting geometric Imperial, SI dimensions base on ANSI and ISO standards and tolerances (GD&T)
• Use CAD/CAM software to program mills and lathes by entering machine code and operation instructions, including zero and reference points, setting tool registers and offsets, compensation, conditional switches, and calculating requirements including basic math (geometry, and trigonometry)
• Sets-up mills, lathes and grinders by installing and adjusting three- and four-jaw chucks, tools, attachments, collets, bushings, cams, gears, stops, and stock pushers. Indicating vices, machining fixtures and tramming machine heads.
• Verifies settings and program code by measuring positions, first-run part, and sample work pieces adhering to standards
• Maintains part specifications by observing machining operations
• Verify the feed and speed of machines during the machining process, taking measurements, detecting program code error and malfunctions
• Troubleshooting processes, adjusting and editing programming parameters
• Sharpening and replacing worn tools
• Adhering to quality assurance procedures and processes specifications
• Maintains equipment by completing instructed preventive maintenance requirements, following manufacturer's and instructions
• Troubleshooting malfunctions and reporting to management for equipment repairs
• Maintains continuity among work shifts by documenting and communicating actions, irregularities, and continuing needs in job turnovers
• Documents actions by completing production and quality logs
• Updates job knowledge by participating in educational opportunities (offsite / off-shift training) and continuous self-improvement through trade publications
• Accomplishes organization goals by accepting ownership for accomplishing new and different requests (cross training), exploring opportunities to add value to job accomplishments
• Comply with lean manufacturing principles and work with leads and supervisors to explore and implement best practices in the manufacturing process
• Maintains safe operations by adhering to safety procedures and regulations
• Effectively work with co-workers, engineering and management in problem solving and exploring and implementing best practices in our operations
• Be prepared to cross train and be utilized in other aspects in the production process

Qualifications:

• High school diploma or equivalent, completion of vocational training or an apprenticeship will be an asset
• Proven experience as CNC Programmer and Machinist with formal training setting up and running Mills, Lathes, and Grinders
• Knowledge of CAD/CAM software, CNC G&M Code manual input for machine controls
• Experience in using and/or programming manual, semi-automated or CNC automated tools and machines (lathes, grinders etc.)
• Proficient in reading and interpreting engineering drawings, schematics, engineering orders, and technical manuals
• Able to read and understand Boeing and Airbus process and material specifications
• Knowledge of the properties of metal and other material
• High level of manual dexterity and detail orientation
• Ability to use precision measuring and portable coordinate measuring equipment tools to take accurate measurements
• Able to manufacture aircraft interior parts and assemblies in accordance with released data
• Proficient in math and analytical abilities (to include but not limited to Algebra, Geometry, Trigonometry)
• Good oral and written communication skills; able to read, comprehend and create written and verbal instructions in the English language
• Maintains safe operations by adhering to safety procedures and regulations

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 41356
Job Location: Atlanta, GA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Civil Engineer

Description:
Civil Engineer

Location: Lake Buena Vista, Florida

Terms: Long Term Contract Employment

The successful candidate will assist the civil engineering team with the evaluation of existing civil utility infrastructure and assist with preparation of H&H analysis associated with the infrastructure. Assistance for civil plan production and environmental analysis/permitting as part of departmental and multidiscipline efforts will also be required. Drawings will be prepared using Autodesk Civil 3D and AutoCAD software. Job requires close collaboration with engineers and architects, as well as clients and stakeholders from a diverse group of business units.

Basic Qualifications:

Experienced Civil Engineer with Environmental Engineering focus.
Proficient knowledge of Autodesk Civil3D, AutoCAD, and Microsoft Office products.
Proficient knowledge of drafting standards, including plan and detail production.
Moderate to proficient knowledge of environmental permitting, hydraulic & hydrologic analysis an modeling, StormCAD, SewerCAD, WaterCAD and ICPR software; knowledge of Bluebeam or other pdf software.
Must be a detail-oriented team player who has the ability to work independent with strong organizational skills and able to work with others in a fast-paced production environment.
5-10 years of experience is required.
Required Education:

Bachelor's Degree.
 
Job Number: 378476
Job Location: Lake Buena Vista, FL
Rate: 40.00
Per Diem: No
Overtime: Possible
Duration: 12 Mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: CDI CORPORATION
Attention: Kris Douglas
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composites Tooling Engineer / CAD Creo or Solidworks CA

Description:
14307

Title Composites Tooling Engineer
45/hr max

Job Summary General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems.

We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

We currently have an exciting opportunity for a Composite Tooling Engineer in our Airframe and Composite Design group in San Diego, CA.

DUTIES AND RESPONSIBILITIES:
•Provides expertise in tooling design for both large and small composite laminates including primary structure and control surfaces.
•Understands composite tooling theory and the selection of appropriate tooling material for the application and/or production volume required.
•Applies technical knowledge to analyze, investigate and resolve assigned engineering problems encountered on the production floor with regard to damaged tooling.
•Applies engineering principles effectively for design, development and sustaining engineering activities related to aircraft systems integration and installation.
•Documents findings, communicates results to engineering staff, makes technical presentations and may represent the organization as the prime technical contact on small identifiable projects.
•Advises management of work in progress, material availability and potential problems to ensure that personnel, equipment, materials and/or services are provided as needed.
•Person will be responsible for working with personnel throughout the company to help resolve any engineering related tooling issue that may impact the manufacturing delivery schedule.
•Responsible for observing all laws, regulations and other applicable obligations wherever and whenever business is conducted on behalf of the Company.
•Expected to work in a safe manner in accordance with established operating procedures and practices.
•Other duties as assigned.
•Exposure to various composite manufacturing processes and tooling concepts.
•Experience with Pro-E Cad software.
•Responsible for observing all laws, regulations, and other applicable obligations wherever and whenever business is conducted on behalf of the Company.
•Expected to work in a safe manner in accordance with established operating procedures and practices.

Qualifications Essential Qualifications Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; four or more years of experience with a bachelors degree or two or more years of experience with a masters degree. May substitute equivalent engineering experience in lieu of education. Must have a complete understanding of engineering concepts, principles, codes, and theory; experience demonstrating a broad application of those concepts; and, expanding knowledge of principles, concepts, theory, and practices in related technical specialties. Must possess the ability to understand new concepts quickly; apply them accurately throughout an evolving environment; organize, schedule, and coordinate work phases; and, determine the appropriate approach at the task level or, with assistance, at the project level to provide solutions to a range of complex problems. Must have excellent communication, computer, documentation, presentation, and interpersonal skills, ability to work independently and as part of a team; able to perform complex tasks in one engineering area; and, lead a team of less experienced professional employees on semi-routine tasks. Able to work extended hours as required. A Professional Engineering License is desirable.
Additional Qualifications Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; two or more years of experience with a bachelors degree. May substitute equivalent engineering experience in lieu of education.
•Must have an understanding of engineering concepts, principles, codes, and theory; experience demonstrating a broad application of those concepts; and, expanding knowledge of principles, concepts, theory, and practices in related technical specialties.
•Must possess the ability to understand new concepts quickly; apply them accurately throughout an evolving environment; organize, schedule, and coordinate work phases; and, determine the appropriate approach at the task level or, with assistance, at the project level to provide solutions to a range of complex problems.
•Must have excellent communication, computer, documentation, presentation, and interpersonal skills, ability to work independently and as part of a team; able to perform complex tasks in one engineering area.
•Background with various composite tooling design is preferred.
•Experienced with a CAD program; Creo, Solidworks, etc.
•Ability to present information to internal and external customers.
•Able to work extended hours as required.
•A Professional Engineering License is desirable.
City San Diego
State California
Travel Percentage Required 0% - 25%
Clearance Required? No
Work Schedule Rule 9/80
Temp Assignment Duration (# of Days) 180
 
Job Number: JE-14307
Job Location: San Diego, CA
Rate: 45/hr max
Duration: 6 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract - Maintainability Eng III

Description:
Unique Skills:
Prior experience in development of Maintainability Predictions and analysis per MIL-HDBK-472, Human Engineering Design Guidelines per MIL-HDBK-759, Mean-Time-To-Repair (MTTR), assessing aircraft modifications for Maintainability impacts, CATIA V5 including Human Builder & Kinematics, and Reliasoft reliability & maintainability software are desired. Candidates with prior US military aircraft maintainer or air crew experience strongly preferred.

Education and Experience Requirements:
Bachelor’s degree in aviation maintenance, engineering technology, or a related curriculum; or an equivalent combination of education and experience sufficient to perform the essential functions of the job. A&P license preferred. Six (6) years of Maintenance Programs/Maintainability experience or aircraft maintenance and operational experience.

Position Purpose:
Responsible for participating in the planning, development, and sustainment of Aircraft Maintenance Programs and related issues regardless of complexity.

Principal Duties and Responsibilities:

Essential Functions: 1. Share responsibility for planning, developing, and sustainment of new and existing Aircraft Maintenance Programs and engineering projects of major complexity within established scope, meeting requirements of FAR 25.1529 or other applicable regulatory directives. 2. Maintain a current knowledge of developments in the field of specialty and/or other related aircraft fields and provide recommendations to department management for process/procedure changes to prepare for new standards and implementation of new methodologies. 3. Meet cost and schedule requirements while ensuring accuracy and consistency. 4. Develop standards and guides to support Maintenance Programs activities. 5. Mentor other team members in areas relative to Maintenance Programs processes and procedures. 6. Engage with internal/external stakeholders to ensure department deliverables are being met or exceeded. 7. Recommend innovations that improve collaboration, communication, quality, and/or effectiveness of product. 8. Review, and provide feedback on written work of team members. 9. Perform other duties as assigned.

Other Requirements: 1. Demonstrated in-depth knowledge of MSG-3 and Maintenance Review board (MRB) processes and methodology.
 
Job Number: 119581
Job Location: Savannah, GA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INTERGEN GROUP
Attention: Kim Mason
Address: 5051 PEACHTREE PKWY STE 200
City, State: PEACHTREE CORNERS, GA 30092
Phone: 678/318-1816
Fax Phone: 678/493-1467
Website: www.intergengroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract - Qual Eng II

Description:
Unique Skills:
Catia V5 Exp.

Education and Experience Requirements:
Bachelors degree in a related curriculum or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.4 years related technical exp in a manufacturing environment or repair and overhaul working with quality management systems with continually increasing responsibility. 3 years exp specific to the appropriate Quality department work to be performed.

Position Purpose:
Working under general supervision, in a team oriented environment, perform all tasks in area of responsibility in a timely and efficient manner to support the inspection/quality system ensuring all aspects of the delivered/finished article is manufactured in accordance with approved quality system requirements and is certified as compliant to type design requirements or compliant with in service limitations for Repair Station activities.

Principal Duties and Responsibilities:

Essential Functions: 1. Manage the compliance of the quality activities of suppliers or facilities through the application of system, product and process audits to the requirements of the FAA approved data. 2. Certify a supplier or assess a facility quality system, personnel, processes and equipment as required to the applicable quality standards. 3. Perform surveillance, source inspections, and first article inspections at supplier facilities, foreign or domestic and/or monitor the inspection system performance throughout all Operations, Materials and Repair Stations. 4. Coordinate quality assurance program plans, monitor and modify audit schedules, evaluate acceptance test programs, and quality engineering requirements of suppliers or facilities and review to ensure program effectiveness and integrity. 5. Witness and validate acceptance, qualification, interchangeability, configuration and compatibility tests. 6. Provide liaison support regarding supplier or facility performance to established requirements. 7. Coordinate documentation support for FAA Compliance.

Additional Functions: 1. Conduct product, system or process failure investigations, and provide technical assistance in resolution of quality problems. 2. Verify required corrective action implementation for timeliness and effectiveness. 3. Perform trend analysis of audit results to identify quality system deficiencies. 4. Work with other departments as needed to meet quality compliance of parts and processes. 5. Perform other duties as assigned.

Other Requirements: 1. Previous Quality experience relative/complying with Regulatory Standards. 2. Understands and is able to apply and communicate to others: blueprints/specifications; Federal Aviation Regulations; Quality Control System Requirements; knowledge of manufacturing/fabrication techniques and processes 3. Computer literate; capable of working within the various software applications utilized throughout the corporation. 4. ASQ Certification as Quality Engineer or Quality Auditor preferred. 5. A&P license preferred.
 
Job Number: 122241
Job Location: Savannah, GA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INTERGEN GROUP
Attention: kim Mason
Address: 5051 PEACHTREE PKWY STE 200
City, State: PEACHTREE CORNERS, GA 30092
Phone: 678/318-1816
Fax Phone: 678/493-1467
Website: www.intergengroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract Administrative / Coordinator

Description:
Notes from Hiring Manager:

* This position will be supporting one of our client’s Security Solutions contracts
* Should have an administrative logistics background, preferably with defense / government / military contracts.
* Must be detail oriented with strong MS office skills, particularly Office and Excel (client currently has 2016 Excel software so must have experience with at least 2013; 2016 preferred)
* Need to have great communication skills as they will be dealing with both internal and external persons
* Strong organization skills as they’ll also be assisting with the Supply Chain Group
* Looking for the right personality fit; someone who can think / act on-the-fly & who’s not easily frustrated

Responsibilities:

> Organize and properly record archived files
> Filing/scanning hard copy files, data entry
> Research data / old files and properly organize / match
> Work closely with Supply Chain Group for deliveries, scheduling/planning of materials and other shipments as needed
> Assist with clerical tasks, i.e. shipping documents, completion sheets, etc….
> Provide additional admin support as needed

Experience:

> 5+ years of related work experience preferably with defense / government / military contracts
> Must be detail oriented and able to multi-task and prioritize
> Must be US Citizen w/ HS Diploma or equivalent; Associate / Bachelor degree in a related field is a plus
> Experience and familiarity with ITAR compliance is preferred
> Demonstrate reliability and strict confidentiality
> Excellent customer service demeanor to interact effectively with customers/vendors
> Work independently with limited supervision/consultation from superiors
> Demonstrate a working knowledge of Microsoft Office applications, especially Word & Excel (2013 or 2016)
> Understand and follow oral and written directions
> Plan and organize work to complete promptly, paying close attention to detail
> Strong attention to detail; excellent data entry and organizational skills; strong written and verbal communication skills
 
Job Number: 052_2018A
Job Location: Elkridge, MD
Rate: DOE
Per Diem: Split Possible
Overtime: Yes
Duration: 6-12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark A Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Customer Service & Support Admins - Phoenix, AZ

Description:
Now Hiring Customer Service & Support Admins!

Overview:

STS AeroStaff Services is now offering Customer Service & Support Admin jobs in Phoenix, Arizona. To learn more, check out the following information.

Are you tired of working the same dead-end contract positions? If so, STS AeroStaff Services offers the best administrative jobs in Phoenix, Arizona; positions that will reward your skills with competitive compensation and benefits. When it comes to your career as a Customer Service & Support Admin, don’t just wing it. Let STS AeroStaff Services help you fly your career forward!

At this point in the post, you can read on, apply online or contact an STS Recruiter at 1-877-707-5767.

Essential Duties & Responsibilities:

• Provides friendly service to and maintains positive relationships with all internal and external Customers
• Works in a cooperative spirit to ensure the success of our Company
• Performs secretarial and administrative duties for Leadership and staff under minimal supervision
• Answers calls, relays and takes messages, transfers calls, provides assistance to callers, screens calls and places calls for management
• Maintains department personnel files and paperwork
• Organizes and maintains payroll file room and coordination of timely rotation of files to off-site storage facility
• Orders supplies using established Company vendors and ordering methods
• Opens, sorts, screens and responds to incoming mail
• Composes, types and edits correspondence
• Compiles data and prepares special reports; gathers and summarizes data
• Makes arrangements for meetings and luncheons as directed by the department Leadership Team
• Maintains appointment calendars for management
• Arranges travel and accommodations for management and staff
• Establishes meeting times, secures location and contacts attendees
• Establishes and maintains files and other information for reference and control purposes
• Prepares confidential paperwork regarding performance appraisals, promotions and other people-related issues for management
• Maintains invoice and budget files and assists in the compilation of variance reports
• Operates computer equipment utilizing word processing, spreadsheet, data base management and presentation software
• Some data entry may be required
• Operates copy machine, FAX equipment and other standard office equipment
• May perform other job duties as directed by Leadership
• Must be able to meet any physical ability requirements listed on this description
• May perform other job duties as directed by Employee's Leaders

Qualifications:

• High School diploma or equivalency required
• Previous analytical/technical experience preferred
• Must provide friendly service to and maintains positive relationships with all internal and external Customers
• Operation of multi-line telephone with courtesy and sufficient speed
• Ability to operation copy machine, FAX machine and other standard office equipment
• Open, sort and screen incoming mail
• Must master computer software applications such as Outlook, Quickbase, Microsoft Word, Excel, PowerPoint and Access
• Must have sufficient ability to handle and resolve office administration tasks
• Must be able to perform mathematical computations
• Must possess excellent organization skills including establishing and maintaining files for reference and control purposes
• Must work under tight time constraints including meeting unforeseen deadlines to accomplish assignments and projects
• Must be able to effectively communicate verbally, by telephone and face to face
• Must have ability to keyboard with sufficient speed and accuracy to meet the demands of the job
• Must be able to read documents, follow instructions, learn and understand office procedures
• Must compile data and prepare special reports
• Responsible for making arrangements for meetings and luncheons and handle travel arrangements as necessary
• Responsible for the payroll records for the entire Department, including Incentive Passes
• Must have ability or must gain ability to use SWEEP for ordering department supplies
• Must be able to work varying schedules and work weekends as required
• Must be able to work occasional overtime, as necessary
• Must be able to comply with Company attendance standards as described in established guidelines
• Must meet confidentiality expectations as to confidential, proprietary and sensitive Company information
• Must maintain a well-groomed appearance per Company appearance standards as described in established guidelines
• Must be a U.S. citizen or have authorization to work in the United States as defined by the Immigration Reform Act of 1986

Company Overview & Benefits:

STS AeroStaff Services works with the largest names in the aviation industry. We offer hundreds of career opportunities throughout the United States, and with more than two decades of experience, our aviation recruiters soar in their commitment to excellence and professionalism.

We proudly offer all qualifying candidates competitive rates, direct deposits, medical insurance, cash advances and referral bonuses. Have questions? Contact us today at 1-877-707-5767.
 
Job Number: 41478
Job Location: Phoenix, AZ
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Cyber - A&A Engineer - Analyst Lead Validator - DOD - Top Secret Clearance

Description:
Primary responsibility is to perform in the Assessment & Authorization (A&A) role to ensure assigned Dept. of Navy/DoD systems/Enclaves/Networks have the proper Authorization to Operate (ATO) and Authorization to Connect (ATC) certifications.
• Will be a part of a team developing recommended courses of action needed to transition current policies and procedures to the Risk Management Framework (RMF) approved processes.
• Advise and assist associated organization POCs in their efforts to prepare and submit ATO and ATC packages to their respective approval authorities.
• Identify network devices and equipment that have not been properly updated to minimize the potential for unauthorized intrusions and malicious software.
• Conduct risk and vulnerability assessments of planned and installed information systems to identify vulnerabilities, risks, and protection needs.
• Provide solutions to complex problems that require the regular use of expertise and creativity. Problems are broadly defined and solutions require the continuation of specialized theories and knowledge.
 
Job Number: 5197 & 5198
Job Location: North Charleston, SC
Rate: $65-75hr (DOE)
Per Diem: NO
Overtime: Possible
Duration: Contract
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Juan Johnson
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Checker

Description:
Prefer Secret Clearance

Familiarity with SAE AS50881 and ANSI/ASME Y14.100 or related design and drafting standards
• CATIA V5 experience
• Familiarity with Change Documentation process and all related requirements to this process,Microsoft office suite (Word, Excel, PowerPoint)

Teamcenter or similar PDM/PLM software tool
• Experience working in an aerospace environment with exposure to or interface with DoD customers
• AutoCAD or other 2D drafting program
 
Job Number: 0310
Job Location: KY
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Checker

Description:
Check 2D and 3D engineering data and 3D models for conformance to requirements as directed. Check parts for fit, form and function to the extent that information is available. Must have experience in Product Lifecycle Management (PLM) processes and tools, including checking CATIA v5, SmarTeam, as well as other CAD datasets, in accordance to Gulfstream requirements as directed.

Checkers are responsible for determining the acceptability of data in the following areas:
• Accuracy and completeness of engineering product definition data, including CAD and PDM data.
• Proper application and compliance with all Engineering and customer drawing requirements.
• Use and understanding of GD & T a must.
• Dimensioning and tolerancing including familiarity with ASME Y14.5.
• Application of best drafting and design practices and procedures.
• Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
• Advise Design personnel regarding GAC drawing and design practices and procedures.
• Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
• Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
• Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
 
Job Number: 24-319
Job Location: Savannah, GA
Rate: $53/hr
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer

Description:
•Experience in part/assembly design for consumer products.
•Solid understanding of strength of materials, material science, Design-for-Assembly, and Geometric Dimensioning & Tolerancing as related to product development.
•Experience in part/assembly/tooling fabrication methods from prototype through mass production manufacturing.
•Proficiency in 3D parametric modeling software is required (top-down/bottom-up modeling, 3D sketching, and configuration based models). SolidWorks experience is preferred.
•Experience in rapid prototyping and machine tool fabrication methods is desired
•Writing technical specifications, test procedures and project documentation
•Ability to execute complex verbal/written instructions for multiple project initiatives.
•Understanding of battery chemistries and ANSI or IEC standards is a plus.
 
Job Number: 41471
Job Location: CT
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer 1

Description:
Design and Analysis Engineer 1

Location: Oklahoma City, OK
Duration: 6 Months

Skill Code: 664-Electronic Sys Design & Analy

Description:
This is an entry level engineering position performing Avionics and associated ground Systems support and Testing. Candidate will perform AV/FC Systems Development Support. This activity will consist of performing system core & interface testing, as well as Lab Test Equipment Support & Maintenance for the C-17 Military Airlifter. Candidate will become a team member in the avionics organization working closely with software, avionics, and systems engineers. Activities will be undertaken per organization and program standards and procedures, under the guidance of subject matter expert engineers and management, but with appropriate freedom to learn and innovate.

A successful candidate will possess excellent communication skills (written and verbal) and the ability to work in a team environment within a complex organization. The selected candidate will be tasked to develop solutions to engineering technical problems; and to apply engineering, scientific, and common sense principles in the context of organizational dynamics and real world cost & schedule targets.

Education / Experience:
Required: Bachelor's degree in an engineering classification from an accredited course of study, in engineering, computer science, mathematics, physics, or chemistry.
 
Job Number: 18-02264
Job Location: Oklahoma City, OK
Per Diem: Split
Overtime: possible
Duration: 6 months
Start Date: 2/26/18
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 859 STEPHENSON HWY
City, State: TROY, MI 48083
Phone: 843/955-9221
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer 1

Description:
Design and Analysis Engineer 1

Location: Oklahoma City, OK
Duration: 6 Months

Skill Code: 664-Electronic Sys Design & Analy

Description:
This is an entry level engineering position performing Avionics and associated ground Systems support and Testing. Candidate will perform AV/FC Systems Development Support. This activity will consist of performing system core & interface testing, as well as Lab Test Equipment Support & Maintenance for the C-17 Military Airlifter. Candidate will become a team member in the avionics organization working closely with software, avionics, and systems engineers. Activities will be undertaken per organization and program standards and procedures, under the guidance of subject matter expert engineers and management, but with appropriate freedom to learn and innovate.

A successful candidate will possess excellent communication skills (written and verbal) and the ability to work in a team environment within a complex organization. The selected candidate will be tasked to develop solutions to engineering technical problems; and to apply engineering, scientific, and common sense principles in the context of organizational dynamics and real world cost & schedule targets.

Education / Experience:
Required: Bachelor's degree in an engineering classification from an accredited course of study, in engineering, computer science, mathematics, physics, or chemistry.

Please share updated resume at ravi@iconma.com in interested.
 
Job Number: 18-02264
Job Location: Oklahoma City,, OK
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer 3

Description:
Design and Analysis Engineer 3

Location: Oklahoma City, OK
Duration: 6 months

Job Description:
This is a mid-level engineering position performing Avionics and associated ground Systems support and Testing. Candidate will perform Lab Test Equipment/systems Operations, Support & Maintenance. This includes Avionics and associated ground Systems development support, troubleshooting and Testing, and performing system core & interface testing for the C-17 Military Airlifter. Candidate will become a team member in the avionics organization working closely with software, avionics, and systems engineers. Activities will be undertaken per organization and program standards and procedures, under the guidance of subject matter expert engineers and management, but with appropriate freedom to learn and innovate.

A successful candidate will possess excellent communication skills (written and verbal) and the ability to work in a team environment within a complex organization. The selected candidate will be tasked to develop solutions to engineering technical problems; and to apply engineering, scientific, and common sense principles in the context of organizational dynamics and real world cost & schedule targets.

Education / Experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Skill Code:
664-Electronic Sys Design & Analy
 
Job Number: 18-02263
Job Location: Oklahoma City, OK
Per Diem: Split
Overtime: possible
Duration: 6 months
Start Date: 2/26/18
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 859 STEPHENSON HWY
City, State: TROY, MI 48083
Phone: 843/955-9221
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer 3

Description:
Please share updated resume at ravi@iconma.com

Job Title: Design and Analysis Engineer 3 (18-02081)

Location: Oklahoma City, OK
Duration: 6 Months

Skill Code: 664-Electronic Sys Design & Analy

Description:
Client is seeking a engineer on the C-17 Military Airlifter Program in Oklahoma City, OK. Candidate to perform Lab Test Equipment/Systems Operations, Support & Maintenance, and Ground Support software modification and integration. Familiarity with ATLAS, test equipment, LabWindows CVI and ability to troubleshoot electronics desired.

Education / Experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.




Design and Analysis Engineer 3 / (18-02072)

Location: Oklahoma City, OK
Duration: 6 months

Description:
Perform Avionics and associated ground Systems support and Testing with focus on flight controls testing. Perform AV/FC Systems Development Support. Perform system core & interface testing. Perform Lab Test Equipment Support & Maintenance.

Education / Experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Skill Code:
664-Electronic Sys Design & Analy



Design and Analysis Engineer 3 (18-02078)

Location: Oklahoma City, OK
Duration: 6 Months

Job Description:
Perform AV/FC and associated ground Systems depot level maintenance, development, repair and Testing. Lead and perform design, drawing development and release, fabrication and maintenance of equipment for ground support depot level troubleshooting and repair of fielded ground support end items.

Education / Experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Skill Code:
664-Electronic Sys Design & Analy



Design and Analysis Engineer 3 (28872-1)

Location: Oklahoma City, OK
Duration: 6 months

Job Description:
Perform Lab Test Equipment/Systems Operations, Support & Maintenance. Perform Avionics and associated ground Systems development support, troubleshooting and Testing. Perform system core & interface testing. Familiarity with software development and maintenance, lab maintenance is desired.

Education / Experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Skill Code:
664-Electronic Sys Design & Analy
 
Job Number: 18-02077
Job Location: Oklahoma City,, OK
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Digital FPGA Design Engineer CA

Description:
161212
Request number: 5156
Date created: 02/06/2018
Job title: Digital/FPGA Design Engineer
Number of openings: 1
Position location: Torrance - CA
Employment type: Contract
OT exempt: No


Shift: 1st
Education Requirement: MS/MA
Driving on company time?: No
Minimum Years of Experience: 5
Maximum Hourly Pay Rate: 50
Start Date: 02/12/2018
Tentative End Date: 08/12/2018


Job Description
Function: As the Digital/FPGA Design Engineer, you will be responsible for designing, developing, modifying, and evaluating FPGA's and ASIC's that interface with electronics, electro-mechanical or mechanical components, assemblies or integrated circuitry for actuation systems or Avionics equipment. Includes new design, as well as modification activities that results in significant product enhancement. Activities encompass design, analysis, testing and process development using engineering principles and methods. Technical integrated circuits; and embedded software/firmware design. Designs will have emphasis on high reliability flight critical applications designed to DO254 Level A requirements.

Required skills:
· Bachelor of Science in Electronics Engineering
· Five or more years relevant experience
· High-speed digital logic circuit designs for Flight critical applications, Critical Timing analyses.
· Experience working on FPGA or ASIC designs that have been qualified to DO254 Level A.
· VHDL Coding of Complex high-speed digital logic.
· DOORS experience is a plus
 
Job Number: MB-5156
Job Location: Torrance, CA
Rate: 50/hr max
Duration: 6 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Digital/FPGA Design Engineer

Description:
As the Digital/FPGA Design Engineer, you will be responsible for designing, developing, modifying, and evaluating FPGA's and ASIC's that interface with electronics, electro-mechanical or mechanical components, assemblies or integrated circuitry for actuation systems or Avionics equipment. Includes new design, as well as modification activities that results in significant product enhancement. Activities encompass design, analysis, testing and process development using engineering principles and methods. Technical integrated circuits; and embedded software/firmware design. Designs will have emphasis on high reliability flight critical applications designed to DO254 Level A requirements.


· Bachelor of Science in Electronics Engineering
· Five or more years relevant experience
· High-speed digital logic circuit designs for Flight critical applications, Critical Timing analyses.
· Experience working on FPGA or ASIC designs that have been qualified to DO254 Level A.
· VHDL Coding of Complex high-speed digital logic.
· DOORS experience is a plus
 
Job Number: 5156
Job Location: Torrance, CA
Rate: DOE
Duration: 6-12 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Maurice Bradford
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Electrical Engineer

Location: Milwaukee, WI
Duration: 12 months

Principal Duties:
- Participates in the development and/or improvement of new and existing products for design change, cost reductions, warranty improvements, and manufacturability.
- Works with minimal direction to create and develop product concepts, and oversees the development to meet time and budgetary constraints.
- Conducts engineering qualification tests on the product including coordinating with outside agencies to ensure compliance.
- Takes initiative to recommend projects, product improvements or cost reductions.
- Performs tradeoff between implementation, schedule, cost and resource constraints and recommend alternatives.
- Provides technical feedback, input and consultation to other departments in design or implementation activities.
- Utilizes CAD systems as related to job.
- Utilizes software application programs such as Microsoft Office, Mentor Graphics Expedition, etc.
- Handles multiple complex or multi-activity tasks simultaneously. Has effective time management skills so that high priority tasks are completed as planned.
- Other duties as assigned.

Requirements:
- Bachelor Degree in Electrical Engineering or a closely related discipline. Master degree preferred.
- Minimum 5 years, preferred 10 years, of experience in product design or engineering experience. Advanced skills, additional education and exceptional performance may alter this requirement.
- Able to apply fundamental engineering theories, mathematics, mechanics, and physical science concepts to the job.
- Experience with electrical schematic capture, PCB layout, 3D CAD modeling, parts database structures, BOM structures, and engineering change management.
- Preferred experience with Mentor Graphics Expedition, Mentor Graphics Valor, and Windchill/Creo.
- Preferred experience in the fields of electrical (120/230Vac), electronic, mechatronics, and electro-mechanical design.
- Preferred experience designing circuits to control DC brush and brushless motors.
- Preferred experience with EMC design techniques.
- Preferred experience designing for regulatory compliance of UL, CE, and other global standards.
- Knowledge of manufacturing processes and limitations to assure conformance of design and fabrication of product.
- Able to obtain and interpret datasheets for electrical and control components, and determine electrical and mechanical requirements.
- Able to proficiently use the tools or materials required to perform typical assigned duties.
- Demonstrated ability to work in a team environment, good written and oral communications skills, flexibility and adaptability to changing situations.
- Preferred experience interfacing with global manufacturing facilities.
- Ability to work independently, as well as direct the work of others.
- High attention to detail and solid organizational skills.
- Possess a professional appearance and positive work attitude, in accordance with work area and company policies.

If interested then please send updated resume at ravi@iconma.com
 
Job Number: 18-00807
Job Location: Milwaukee,, WI
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Design & Analysis Engineers III - OK

Description:
Active Secret Clearance, NOT REQUIRED to start.

Our Aerospace Client is currently seeking an experienced Electrical systems Designers to perform Electrical Loads Analysis and power systems modification. This
includes Airborne Surveillance Command and Control aircraft from around the world including, NATO, French, Saudi, US, UK, Japan AWACS, B-52 Bombers, C32/C40 VIP transports, , the E-4 National Airborne Operations Center, KC-767
International Tankers and VC-25 presidential transport.
This position is located in Oklahoma City, Oklahoma
Job Responsibilities will include but not be limited to:
- Develop and document electrical load analysis based upon system design.
- Provide coordination memos with impact analysis for systems design changes.
- Present results of analysis at customer design reviews (PDR, CDR)
- Publish reports detailing the aircraft electrical load and bus capability.
- Utilize existing software to complete Electrical Load Analysis
- Direct a team of engineers providing individual direction.
- Leverage existing tools and help develop a path forward for a common tool for ELA.
- Works on unusually complex technical problems and provides solutions which are highly innovative and ingenious.
- Develops advanced technical ideas and guides their development into final product
- Serves as organization spokesperson on advanced projects and programs. Acts as advisor to management and
customers on advanced technical research studies.

Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Previous experience with aircraft power distribution and architecture desired.

ACS Group (formerly 'Comforce')
 
Job Number: EEOK
Job Location: Oklahoma City, OK
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ElectroMechanical Engr - Level 3 / PWB / CREO / Catia / active secret FL

Description:
Requirement#MFC-REQ-1452
Work LocationOrlando, FL
Work Week9/80-A

Needed Date08/14/2017
End Date08/13/2018
Number of Resources4

Number of Resources Level of Clearance Prime Contract Number Can Start Without Clearance(Yes/No) Interim Clearance Sufficient
4 Secret No No

TitleElectroMechanical Engr - Level 3
Description
Hardware ElectroMechanical packaging design engineer will be responsible for the hardware development for missile and/or fire control electronics: specifically printed wiring board (PWB) and circuit card assembly (CCA) design as well as general packaging support. Activity will require cross functional coordination to complete PWB/CCA hardware design and integration for the designated weapon system. General qualifications: Researches, develops, and designs component, equipment, and networks for military applications. Candidate must have experience CCA and PWB design as well as the associated components and connectors.
Skill/Experience/Education
Mandatory:

Candidate must have a Bachelors degree from an accredited college in a related discipline, Proficient with Pro-E and/or Creo or Catia software, Must have security clearance
Desired:

CREO


Interview RequiredYes
Max Pay Rate53.00 USD

Shift1st Shift
OT AllowedYes (OT Limitation: No)
TravelNo
Non-Exempt
Rate TypePer Hour
 
Job Number: JE-1452
Job Location: Orlando, FL
Rate: 53/hr max
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electromechanical Engineers - Orlando, FL

Description:
STS AeroStaff Services is hiring Electromechanical Engineers in Orlando, Florida.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Hardware ElectroMechanical packaging design engineer will be responsible for the hardware development for missile and/or fire control electronics: specifically printed wiring board (PWB) and circuit card assembly (CCA) design as well as general packaging support
• Activity will require cross functional coordination to complete PWB/CCA hardware design and integration for the designated weapon system
• General qualifications: Researches, develops, and designs component, equipment, and networks for military applications

Basic Qualifications:

• Candidate must have a Bachelor’s degree from an accredited college in a related discipline
• Candidate must have experience CCA and PWB design as well as the associated components and connectors
• Proficient with Pro-E and/or Creo or other 3D software (such as Catia, Solidworks, etc)
• Must be able to obtain a security clearance

Preferred Qualifications:

• CREO experience

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 41497
Job Location: Orlando, FL
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic Design & Analysis Engineer I & III - (OK)

Description:
This is a mid-level engineering position performing Avionics and associated ground Systems support and Testing. Candidate will perform avionics and associated Ground Systems support and testing with a focus on Flight Controls. Perform AV/FC Systems analysis, development and test. All effort is in support of the C-17 Military Airlifter. Candidate will become a team member in the avionics organization working closely with software, avionics, and systems engineers. Activities will be undertaken per organization and program standards and procedures, under the guidance of subject matter expert engineers and management, but with appropriate freedom to learn and innovate.

A successful candidate will possess excellent communication skills (written and verbal) and the ability to work in a team environment within a complex organization. The selected candidate will be tasked to develop solutions to engineering technical problems; and to apply engineering, scientific, and common sense principles in the context of organizational dynamics and real world cost & schedule targets.

Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

ACS Group (formerly 'Comforce')
 
Job Number: EEOK
Job Location: Oklahoma City, OK
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic Design & Analysis Engineer II & III & IV - (CA)

Description:
SEVERAL OPENINGS IN THE HUNTINGTON BEACH, CA AREA.

- Developing electronic and electrical flight control system solutions
- Participating in modification projects for flight control hardware and software designs based on platform requirements
- Executing systems and software testing to verify operational and functional requirements
- Managing hardware/software suppliers' performance to ensure customer requirements are met
- Supporting resolution of product integration & field operation issues
- Researching new technologies for potential application to C-17
- Developing solutions to technical problems of safety of flight scope and impact
- Applying solid engineering, scientific, and common sense principles in the context of organizational dynamics and real world cost & schedule targets
- Integrating into teams and collaborating with multiple engineering disciplines in solving moderately complex problems concerning fielded airborne avionics and flight control (AFC) systems, involving both hardware and software.
- Participate in full lifecycle projects to develop functional and interface requirements; design hardware, software and interface specifications; test and validate to ensure system designs meet operational and functional requirements; assist in monitoring supplier performance to ensure system integration and compliance with requirements
- Work with customers and their Boeing representatives to obtain feedback for product enhancements and corrective actions.

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

ACS Group (formerly 'Comforce')
 
Job Number: EEhb
Job Location: Huntington Beach, CA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic Systems Design & Analysis Engineer III - (OK)

Description:
We are seeking a engineer on the C-17 Military Airlifter Program in Oklahoma City, OK. Candidate to perform Lab Test Equipment/Systems Operations, Support & Maintenance, and Ground Support software modification and integration. Familiarity with ATLAS, test equipment, LabWindows CVI and ability to troubleshoot electronics desired.

Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

ACS Group (formerly 'Comforce')
 
Job Number: EEOK
Job Location: Oklahoma City, OK
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic Systems Design & Analysis Engineer III - (OK)

Description:
Perform Lab Test Equipment/Systems Operations, Support & Maintenance. Perform Avionics and associated ground Systems development support, troubleshooting and Testing. Perform system core & interface testing. Familiarity with software development and maintenance, lab maintenance is desired.

Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

ACS Group (formerly 'Comforce')
 
Job Number: EEOK
Job Location: Oklahoma City, OK
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded S/W Engineer - Level 2 with active secret TX

Description:
160551
Requirement#MFC-REQ-1512
Work LocationGRAND PRAIRIE, TX
Work Week9/80-A
Needed Date12/04/2017
End Date06/04/2018
Number of Resources4
Active Secret

Title:Embedded S/W Engineer - Level 2

Description
Our Australian Mine Truck program is looking for software engineering with experience in ground vehicle software development.
Looking for candidates with the following attributes:
Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements.
Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and product on Autonomous Ground Vehicle System.
Interfaces with customers, suppliers, application users, and other technical and support personnel.
Must have Secret clearance in place prior to submitting resume. Resume must have status of clearance stated.
Skill/Experience/Education
Mandatory:

US DOD Secret Clearance Required
BS in Computer Engineering, Computer Science, Software Engineering, or Related Field
C/C++
Software Static Analysis Tools
Object oriented design
Real Time Software Development
Algorithms Implementation and Development
Knowledge of model based design using Matlab/Simulink
Desired:

Software Configuration Management (CM) Tools;

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
US DOD Secret Clearance Required 4-5 Years Yes
BS in Computer Engineering, Computer Science, Software Engineering, or Related Field 4-5 Years Yes
C/C++ 4-5 Years Yes
Software Static Analysis Tools 4-5 Years Yes
Object oriented design 4-5 Years Yes
Real Time Software Development 4-5 Years Yes
Algorithms Implementaiton and Development 4-5 Years No
Knowledge of model based design using Matlab/Simulink 4-5 Years No
Software Configuration Management (CM) Tools 0-3 Years No


Interview Required Yes
Max Pay Rate 80/hr

Shift1 st Shift
OT Allowed No
Travel Yes (Various)
Travel Description Travel to customer locations (as required)
Exempt
 
Job Number: JE-1512
Job Location: Grand Prairie, TX
Rate: 80/hr max
Duration: 6 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded S/W Engineer - Level 2 with active secret TX

Description:
160554
Requirement#MFC-REQ-1515
Work LocationGRAND PRAIRIE, TX
Work Week9/80-A

Needed Date02/05/2018
End Date08/05/2018
Number of Resources2

Active Secret

Title:Embedded S/W Engineer - Level 2
Description
Lockheed Martin is seeking Software engineers to enhance their existing Ground vehicle Hardware in the Loop (HWIL) Laboratory and its tools for their Australian Mine autonomous vehicle program.
These positions required the following skill sets: Past Hardware In the Loop (HWIL) development experience, Low Fidelity Gazebo models, vehicle models, mine environment models, sensor, models, Test cases, and other simulation development/enhancement as needed.

Primary development language will be C++ and it will be hosted on multiple Operating Systems such as Ubuntu, Redhat Linux, and VxWorks. Experience with ROS/Gazebo is also highly desired.

Travel will be required to Littleton Colorado
Skill/Experience/Education
Mandatory:

US DOD Secret Clearance Required BS in Computer Engineering, Computer Science, Software Engineering, or Related Field, Hardware In The Loop (HWIL) experience, C/C++, Gazebo, ROS, simulation development/enhancement, Ubuntu, Redhat Linux, and VxWorks.
Desired:

Software Configuration Management (CM) Tools;

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
US DOD Secret Clearance Required 4-5 Years Yes
BS in Computer Engineering, Computer Science, Software Engineering, or Related Field 4-5 Years Yes
C/C++ 4-5 Years Yes
Hardware In The Loop (HWIL) experience 4-5 Years Yes
Gazebo 4-5 Years Yes
ROS 4-5 Years Yes
Prior simulation development/enhancement experience 4-5 Years Yes
Ubuntu 4-5 Years Yes
Redhat Linux 4-5 Years Yes
VxWorks 0-3 Years Yes



Interview Required Yes
Max Pay Rate 80/hr
Shift 1st Shift
OT Allowed No
Travel Yes (Various)
Travel Description Travel to customer locations (as required)
Exempt
 
Job Number: JE-1515
Job Location: Grand Prairie, TX
Rate: 80/hr max
Duration: 6 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded S/W Engineer - Level 2 with active secret TX

Description:
160555
Requirement#MFC-REQ-1516
Work LocationGRAND PRAIRIE, TX
Work Week9/80-A

Needed Date02/26/2018
End Date02/22/2019
Number of Resources6

Active Secret

Title:Embedded S/W Engineer - Level 2

Description
Lockheed Martin's Tactical Missiles Advanced Programs area is seeking Software Engineering candidates to perform development associated with the following program product lines: Tactical Missile System (TACMS), Army Tactical Missile System (ATACMS), and Guided Multiple Launcher Rocket System (GMLRS). Software engineering effort will be to implement Operational Flight Software (OFS), Operational Test Software (OTS), and Launcher Simulation/Emulator Software updates.

Skills required are real time programming, including experience with the vxWorks real time operating system, inertial and GPS navigation applications, and Ethernet communication protocol. Preferred skills and experience include use of the GNAT Ada compilation system, C/C++, Wind River Workbench development environment, Power PC experience, including use of an In-Circuit Emulator, and the Razor configuration management data base system.
Skill/Experience/Education
Mandatory:

US DOD Secret Clearance Required BS in Computer Engineering, Computer Science, Software Engineering, or Related Field C/C++, ADA, Real Time Software Development, Wind River Workbench, Power PC Development, vxWorks, Inertial & GPS navigation unit experience
Desired:

Software configuration management tool experience, Razor

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
US DOD Secret Clearance Required 4-5 Years Yes
BS in Computer Engineering, Computer Science, Software Engineering, or Related Field 4-5 Years Yes
C/C++ 4-5 Years Yes
ADA 4-5 Years Yes
Real Time Software Development 4-5 Years Yes
Wind River Workbench 4-5 Years Yes
Power PC Development 4-5 Years Yes
vxWorks 4-5 Years Yes
Razor 0-3 Years No
Inertial & GPS navigation unit experience 4-5 Years Yes


Interview Required Yes
Max Pay Rate 80/hr
Shift 1st Shift
OT Allowed No
Travel Yes (Various)
Travel Description Travel to customer locations (as required)
Exempt
 
Job Number: JE-1516
Job Location: Grand Prairie, TX
Rate: 80/hr max
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer - Secret Clearance

Description:
***Must have Active Secret Clearance***



Major purpose:

The Aero Software Engineer is responsible for designing, developing, integrating and test of high fidelity, scalable, physics-based Aerodynamics Software models for Real-Time simulation training applications. Responsibilities also include troubleshooting and fixing existing software discrepancies in a variety of aerodynamic subsystems such as: engines, flight controls, control loading, motion, and aircraft systems.



Major functions:

" Provide aerodynamic software design, development and integration support on a variety of simulator programs for both helicopter and fixed wing platforms

" Support peer reviews for aero software solutions

" Troubleshoot pre-existing software discrepancies within the aero domain

" Support testing activity both in the lab and on the simulator to include flight test matching, qualification test guide (Client) analysis and certification testing

" Ability to work with a variety of aero subsystems and understand the interactions with other simulator subsystems

" Ability to work tasks to completion with minimal guidance



Education/Required Experience


" B/S in Aerodynamics, Physics, Mathematics or equivalent experience with an emphasis on software

" Minimum of 8 years of aerodynamic engineering technical experience

" Minimum of 8 years experience in software development with C/C++, Fortran, and/or Ada

" Experience developing in a Unix or Linux operating system environment

" Experience working with FAA Level 'D' fidelity requirements is desired

" Proficiency with Matlab SimuLink is a plus

" Systems integration experience

" Good computer skills including working knowledge of Microsoft Office

" Must exhibit strong problem-solving skills

" Strong communication skills and good team work



 
Job Number: 18-03647
Job Location: Arlington, TX
Rate: 65.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2018-08-12 00:00:00.0
Start Date: 2018-02-12 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Sebastian Hernandez
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engine/APU, ECS, Fuel Systems Engineer

Description:
Engine/APU, ECS, Fuel Systems Engineer

Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
Required Experience in the following:
• System Certification Requirements: Cert Plan, Flight Test Plan, Flight Test Report, Qual Test Report, Lab test report, Testing requirements/Flight Clearance and or SOF Requirements, development testing
• Hardware Qualification: Plans, procedures, Reports, conformity, ATP & Outline Drawings
• Software Certification: Experience reviewing PSAC, CIA, SAS. Experience in software V&V Required Experience in the following:
• Engine Systems (FADEC)
• Environmental Control Systems
• APU systems
• Fuel systems (Distribution and Indication)

Desired Experience in the following:
• Working Knowledge ARP4754 and CFR 25
• Exposure to Part 33 certification
• Project Management Skills/Experience:
• Configuration change management
 
Job Number: 7519
Job Location: Savannah, GA
Rate: $58-$63
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Electromechanical - 3 / active secret preferred / CREO / electronic packaging CA

Description:
1631
Engineer Electromechanical - 3 (Job Number: 18002041)

Number of Openings: 1

Location(s): United States-California-Redondo Beach


Shift: 1st Shift

Target Start Date: Mar 19, 2018

Target End Date: Mar 15, 2019

Pay Rate: $58/hr. - $60/hr.

Work Week: 9/80

Location: Redondo Beach, CA

Duration: 1 year

The responsibilities include mechanical design & analysis using computer-aided design (CAD), conducting packaging trades, tolerance and interference analyses, generating drawing packages & associated electronic data, and supporting the fabrication, assembly and test of the hardware.


Basic Qualifications:

•5 Years with Bachelors in Science; 3 Years with Masters; 0 Years with PhD.
•A Bachelor of Science degree in a STEM (Science, Technology, Engineering or Math) discipline
•Electronic packaging, CAD, or mechanical design experience in an aerospace environment
•Demonstrated technical skills with experience supporting a multi-disciplined team
•Experience working with different partners across organizations and programs
•Proficient in performing tolerance and interference analyses
•Experience in generating and releasing product detail and assembly drawings
•Experience with PTC Creo / Intralink software applications



Preferred Qualifications:

•A Master’s Degree in Mechanical or Aerospace Engineering and 4+ years of engineering experience in an aerospace environment
•Experience with electronic packaging / mechanical design for airborne & space applications
•Electronics design development and sustaining experience spanning cradle to grave
•Experience with Enovia PLM software application
•Proficiency with electrical design, electronics manufacturing processes and qualification activities
•Familiarity with research and development of advanced packaging technologies
•Active DoD Secret or Top Secret, and/or SCI clearance
 
Job Number: MB-1631
Job Location: Redondo Beach, CA
Rate: 58-60/hr
Per Diem: no
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Design Checker - Level 3

Description:
Location: Lexington, KY
Rate: $25.00 - $35.00/HR
Duration: 1 year contract
Shift: 1st shift

****MUST have an Active Secret Clearance or to have had one within the last 2 years*****

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years*****
Examines engineering drawings and related documents for soundness, efficiency, and simplicity in design; completeness, clarity, and dimensional accuracy; correctness of materials and processes; conformity to design/drafting standards, design specifications, and practicability; and economy of fabrication, assembly, and installation.
- This position will support engineers in the review of design data that will comply with applicable military specifications, SAE, ANSI, ASME, and other related standards.
- This position will be responsible for reviewing drawings for formatting errors and working with the engineering team to ensure a high level of quality in the design data.
- This position will also be responsible for reviewing change documentation and its related incorporations for completeness and correctness.
- This position will help develop a set of common Design Standards that meets our Customers and Program requirements.
- This position will be expected, at times, to be involved with the drawing creation and subsequent Production review processes.

Skill/Experience/Education
Mandatory:
Must have 6+ years of experience of each of the following:
- Familiarity with SAE AS50881 and ANSI/ASME Y14.100 or related design and drafting standards - CATIA V5 experience
- Familiarity with Change Documentation process and all related requirements to this process, Microsoft office suite (Word, Excel, PowerPoint)
****MUST have an Active Secret Clearance or to have had one within the last 2 years*****

Desired:
- Teamcenter or similar PDM/PLM software tool
- Experience working in an aerospace environment with exposure to or interface with DoD customers
- AutoCAD or other 2D drafting program
 
Job Number: 8590
Job Location: Lexington, KY
Rate: $25.00 - $35.00/HR
Per Diem: Split Possible
Overtime: No
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Technician

Description:
This position will assist Manufacturing and/or Service Engineering activities related to MMDG product lines. The position will perform testing and troubleshooting to determine root cause failures and maintain the computer-controlled systems used within the production facility. The position will perform engineering tests per defined procedures to support the service department.

Required Qualifications:
• Ability to accurately interpret written test procedures
• Basic mechanical knowledge of test equipment
• Use various electronic equipment and software to complete tasks
• Use of office software (Word, Excel, Power Point, MS Project, Visio etc.)
• Ability to effectively communicate in person and via email/telephone
• Ability to effectively follow verbal instructions from department engineers
• Ability to lift up to 25 pounds on a repeated basis
• Close vision (clear vision at 20 inches or less) / Color vision (ability to identify and distinguish colors)
• Able to succeed in highly regulated compliance oriented environment while still providing service excellence

Other Required Skills:
• Ability to define problems, collect data, establish facts, and draw valid conclusions
• Ability to interpret an extensive variety of technical instructions and deal with several abstract and concrete variables
 
Job Number: 5159
Job Location: Salt Lake, UT
Rate: 20.00-25.00HR
Duration: 6-12 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Maurice Bradford
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Engineer 4 (Everett, WA & Mesa, AZ )

Description:
Equipment & Tool Engineer 4

Location: Everett, WA & Mesa, AZ
Duration: 9 months

Description:
Develops program and project requirements, develops highly complex equipment and tooling concepts and designs solutions, including alternatives for the Production System. Validates analysis of technical data, influences product engineering design and makes robotics, automation or technical recommendations to support production system integration for a aerospace products. Leads the creation and modification of equipment and tooling definition at the program level. Executes project plans, provides input to Make/Buy decisions and partners with Procurement to meet program schedule, cost and quality targets. Ensures compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Leads gated reviews and develops plans for production readiness, preventative maintenance and spares. Validates contractual performance milestones. Develops and implements work-arounds and maintains configuration of hardware, software and documentation. Conducts studies and make recommendation for disposition of assets.

Education/ Experience:
Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Skill Code:
66U-Designer Engineer

Required Skills:
Skills: Category Name Required
Areas of Expertise CATIA V5 No
Software Skills CATIA V5 No
Technical Skills CATIA V5 No

If interested then please share updated resume at ravi@iconma.com
 
Job Number: 18-00738
Job Location: Everett,, WA
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Engineer IV - (WA)

Description:
SEVERAL OPENINGS IN THE EVERETT, SEATTLE, WA AREA.

Develops program and project requirements, develops highly complex equipment and tooling concepts and designs solutions, including alternatives for the Production System. Validates analysis of technical data, influences product engineering design and makes robotics, automation or technical recommendations to support production system integration for a aerospace products. Leads the creation and modification of equipment and tooling definition at the program level. Executes project plans, provides input to Make/Buy decisions and partners with Procurement to meet program schedule, cost and quality targets. Ensures compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Leads gated reviews and develops plans for production readiness, preventative maintenance and spares. Validates contractual performance milestones. Develops and implements work-arounds and maintains configuration of hardware, software and documentation. Conducts studies and make recommendation for disposition of assets.

Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

CATIA V5

ACS Group (formerly 'Comforce')
 
Job Number: EquipToolWA
Job Location: Everett, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Financial Analyst (Secret Clearance)

Description:
Secret Clearance required.

Role Purpose
The Staff Accountant under the leadership of the Controller is responsible for the accurate and timely monthly general ledger closing process for the St Louis site and 3 administrative reporting units. The Staff Accountant must be able to work across departments and apply accounting principles, government regulations and company policy to prepare general ledger entries. This position will also be responsible for account reconciliations and analysis, preparation of monthly financial reporting and maintaining the fixed asset records.

DUTIES AND RESPONSIBILITIES:
• Primary responsibility and accountability for monthly close, including the preparation and rationalization of journal vouchers, ledgers and financial statements
• Evaluate, and apply internal controls to achieve accurate and efficient accounting systems and compliance with company, professional, and government accounting practices.
• Preparation of monthly general ledger account reconciliations and income tax accruals calculation
• Preparation and/or review of general ledger entries to record business transactions and evaluate to ensure accuracy and compliance with policies
• Maintain fixed asset schedules and record monthly depreciations
• Prepare monthly, quarterly and annual tax schedules
• Assist with annual physical inventory process
• Train support staff in functional areas of responsibility and on accounting systems.
• Assist in the development of policies and procedures to safeguard company assets and ensure transactions are recorded properly.
• Assist in special projects as needed.
• Interpretation and application of accounting and procurement standards and regulations.
• Responds to audit questions related to the accounting system raised by government agencies and other customers.
• Prepares and files excise, property, employment, income and miscellaneous tax returns, reports and claims.
• Pursue personal development of skills and knowledge necessary for the effective performance.
• Performs other duties, tasks and responsibilities as assigned.

EVMS background of understanding the various processes (work authorization, scheduling, EACs, budget change requests, etc) with the added expertise of being able to:

1. Meet with personnel to understand and document process flows
2. Edit/Write process documentation whether in the form of work/desktop instructions or the System Description itself
3. Ability to summarize process flows and develop “story boards” so that they are easily explained and understood by those not intimately involved in the process (ie, customers, DCMA auditors, etc.

***Creates and manages the cost/budget/actuals/forecast and works within the accounting systems.

Qualifications
DOD Secret Clearance is required.
Education:
• Bachelor degree in Accounting or Finance required.
Required:
• Minimum 2 years of experience of applicable work experience. Experience in public accounting and manufacturing experience preferred.
Additional Qualifications:
• Thorough knowledge of US GAAP accounting
• Working knowledge of Hyperion software preferred.
• Must be able to work with minimal supervision and is responsible to independently evaluate a broad range of critical decisions and present recommended actions to senior-level management.
• U.S. Person per ITAR regulations to comply with export compliance and site SSA requirements
• Excellent PC skills in Windows Suite
• Capable of working under pressure to meet deadlines
• Strong communication & interpersonal skills
• Strong organizational skills and process adherence skills
• Ability to manage cross functional project teams
• Unquestioned business ethics, honesty, and integrity
• Excellent PC skills in Windows Suite required.
• Experience with Business Planning Systems
• Prior experience in DoD or Aerospace
Clearance required: Secret
 
Job Number: 382789
Job Location: SEATTLE, WA
Input Date: 11/14/2020
Firm Name: CDI CORPORATION
Attention: Jonathan Oleson
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Control DER

Description:
Position Purpose:
Responsible for the design, research and development of advanced new applications resulting in new product/business for the company.

Unique Skills:
• Flight Controls Software DER. Please see DER chart for additional details.
• This position will need the following delegations on FAA chart Systems and Equipment: D1, D2, D3 and D7.

Education and Experience Requirements:
• Bachelor's Degree in engineering, a related curriculum required or equivalent combination of appropriate education and experience sufficient to successfully perform the essential functions of the job.
• Fifteen (15) + year’s progressively responsible engineering exp in specific tech discipline with Bachelors. Exp credit considered for related adv degrees limited to 2 yrs Masters, 4 yrs PhD in fields applicable to this job. Requires approval of Eng PRB include bus justification.

Principle Duties and Responsibilities:
• Plans R&D programs and recommends technological application programs to meet corporate objectives
• Proactively promotes process initiatives that improve the balance of technical product, cost and schedule
• Applies cutting edge theories and technologies by exhibiting an exceptional degree of ingenuity, creativity and resourcefulness
• Champions and develops innovative principles and ideas
• Often acts independently and exercises wide latitude in determining objectives and approaches to critical assignments
• As a recognized expert in the field, provides consultative services to senior/executive leaders both within the company and the industry Perform other duties as assigned.
• Advanced degree in engineering or related curriculum preferred
• The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 24-228
Job Location: Savannah, GA
Rate: $135.00
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Control Software DER

Description:
Position Purpose:
Responsible for the design, research and development of advanced new applications resulting in new product/business for the company.

Unique Skills:
Flight Controls Software DER. Please see DER chart for additional details.

Education and Experience Requirements:
• Bachelor's Degree in engineering, a related curriculum required or equivalent combination of appropriate education and experience sufficient to successfully perform the essential functions of the job.
• Fifteen (15) + year’s progressively responsible engineering exp in specific tech discipline with Bachelors. Exp credit considered for related adv degrees limited to 2 yrs Masters, 4 yrs PhD in fields applicable to this job. Requires approval of Eng PRB include bus justification.

Principle Duties and Responsibilities:
• Plans R&D programs and recommends technological application programs to meet corporate objectives
• Proactively promotes process initiatives that improve the balance of technical product, cost and schedule
• Applies cutting edge theories and technologies by exhibiting an exceptional degree of ingenuity, creativity and resourcefulness
• Champions and develops innovative principles and ideas
• Often acts independently and exercises wide latitude in determining objectives and approaches to critical assignments
• As a recognized expert in the field, provides consultative services to senior/executive leaders both within the company and the industry Perform other duties as assigned.
• Advanced degree in engineering or related curriculum preferred
• The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 24-225
Job Location: Savannah, GA
Rate: $135.00
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Control Systems Engineer

Description:
The Flight Control Systems Engineer is responsible for (but not limited to) supporting the following:


• Design and test of Flight Control Systems (FCS) with embedded DO-178 software and DO-254 complex hardware, including Fly-By-Wire Flight Control Systems. Specifically the integrated hardware and software specification, design, implementation, and verification of a flight control system per the DO-178 and DO-254 standards.


• System and software design, requirements management, systems specifications, interface management, system safety assessment, verification and validation testing in desktop simulation environment and systems integration labs, aircraft flight test, and aircraft/system qualification and certification


Bachelor’s Degree is required.
Major in Computer Engineering, Software Engineering, or Computer Science is preferred.
Bachelor’s Degree in Physics, Electrical, Aerospace, or Mechanical Engineering will be considered with sufficient software development experience.
Master’s Degree in the Engineering disciplines mentioned above is preferred.

Desired Skills

· Embedded DO-178 software
· MathWorks MATLAB / Simulink with Stateflow and Embedded Coder
C/C++ code
C# test scripts
· IBM Rational DOORS
· Serena Dimensions / PVCS
Git
 
Job Location: TX
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Candace
Address: 1600 AIRPORT FWY STE 400
City, State: BEDFORD, TX 76022-6871
Phone: 817/545-4009
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Full-Stack Developer (U.S. citizenship required)

Description:
Full-Stack Developer (U.S. citizenship required)

Location: Centennial, CO
Pay Rate: Depends on Experience (DOE)
Duration: 6 month W2 contract
Shift: not specified
**MUST be a U.S. CITIZEN**

Summary:
As a full-stack developer, the ideal candidate will be responsible for building a new single page application for our CRE Dashboard project. We are seeking a talented developer who is self-motivated to work with our Certified Responsible Engineers (CRE’s) in developing new features to support their business needs.

Responsibilities Include:
• Work with Product Owner & key stakeholders to identify solutions that meet their needs
• Collaborate with business users and technology partners at all levels
• Provide direction for testing of new functionality
• Concept, storyboard, wireframe and prototype user experiences on web app
• True full stack development, exposure to front end and back end architecture
• Provide valuable insight into front end development best practices, trends and techniques

Job Requirements
REQUIREMENTS:
• Bachelor's degree in Information Science/Information Technology, Computer Science, Engineering or related experience.
• 5+ year’s software development experience.
• Experience in Java
• Experience in a modern web application framework (preferably Spring)
• Experience in writing SQL queries against relational database (preferably Oracle)
• Experience in a version control system (preferably GIT)
• Experience in a Linux or Unix based environment
• Exposure to production systems design including Performance, Efficiency and Security
• Exposure to query optimization and troubleshooting
• Exposure to effective data modeling within SQL
• Understanding of modern Microservice-based architectures and methodologies
• Exposure to REST and effective web service design
• Strong communication, decision-making, and problem-solving skills
• Deep knowledge of AngularJS practices and commonly used modules based on extensive work experience.
• Concept, storyboard, wireframe and prototype user experiences on web apps.
• Proficiency with testing tools (Karma, Jasmine).
• Ability to maintain a high level of attention to detail with flexibility to work independently and collaboratively
• Experienced in Agile methods using Scrum.
• JIRA experience or knowledge of preferred
 
Job Number: 8353
Job Location: Centennial, CO
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
HVAC Engineer

Description:
HVAC Engineer

Cape Canaveral, FL
1 Year Contract
Pay Rate: DOE

Job Description / Responsibilities:

The Mechanical HVAC Engineer will produce moderately-complex technical designs and some analysis mechanical to new and existing facility related systems in support of ULA Atlas V, Delta IV and future Vulcan Launch Operations at Cape Canaveral Air Force Station Florida. The successful candidate, as part of ULA’s Engineering and Infrastructure Team, shall be required to produce accurate and detailed design drawings as well as generate validating system analysis calculations. He/she will gather information, perform field walk-downs, and create or revise electronic CAD files. Projects typically involve implementations being performed by external Contractors, in accordance with construction documents.

The successful candidate should have at least 15 years of relevant experience in designing, building, modifying, testing and maintaining commercial and industrial HVAC systems. Experience with chilled water and DX systems, ventilation and air distribution required. Engineer shall perform engineering thermodynamic, heat transfer and fluid/gas dynamic calculations. Apply knowledge of regulatory and certifying agency requirements to ensure product and/or service is in compliance. Apply knowledge of functional testing requirements to ensure product and/or service meets or exceeds customer expectations. Project support will also include generation of Statement of Work, Contractor contract documents for schedule integration, fabrication and installation phases. The successful candidate will be required to coordinate multiple construction activities and project schedules around launch activities. The successful candidate should be self-motivated and able to work productively without constant direct supervision. He/she will be given latitude to establish priorities, determine technical objectives and define the most efficient approaches to completing assignments. Some outside work climbing stairs and accessing ladders will be required. He/she may need to work at heights on launch structures and facility catwalks. The successful candidate shall be willing to support second/third shifts and weekends as required.

Skills:
This position requires expert knowledge of mechanical design, analysis and drafting practices and a sound practical knowledge of engineering principles, practices, and industry standards. At least 10 years of recent Autodesk AutoCAD experience. Other 3D modeling and design experience in Autodesk Revit or other Building Information Modeling (BIM) software is highly preferred.

Educational and Professional Qualifications:
A Bachelor’s degree from an accredited college in Mechanical Engineering and 15 years of applicable experience is preferred. A related discipline degree, or equivalent experience/combined education, with 10+ years of professional experience shall also be considered. Professional Engineering registration in the State of Florida is preferred, although not required.
 
Job Number: 8429
Job Location: Cape Canaveral, FL
Rate: DOE
Per Diem: Possible Split
Overtime: Exempt
Duration: 1 Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Process Development Engineer

Description:
Work Schedule

• Monday to Friday, 8-5



Scope of Position:

• Intermediate level process development engineer focused on advancing connectivity innovation.

• Responsible for technical development of new products/processes under some guidance from senior level engineers.

• Improving processes and solving problems based on fundamental understanding gained through the use of the scientific method and DOE.

• Reducing defects by eliminating root causes.

• Application of DMAIC and advanced statistical tools.

• Improving manufacturing cost, quality, uptime, yields, cycle time, and safety.

• Evaluating new raw materials, defining process parameters, and developing new processing equipment.

• Documenting experiment planning and process changes.



Day to Day Responsibilities:

• Design and develop new processes or improve existing processes at Corning facilities worldwide.

• Create operational ranges for parameters defined as a result of experimental development.

• Assist in the development of project plans and execute schedules to meet promised deliverables.

• Establish process development technical guideline.

• Work with local plant process experts and global SMEs on new processes innovation.

• Solve problems and improve processes based on fundamental understanding.

• Ensure that manufacturing requirements are properly developed and documented in conjunction with appropriate manufacturing, production, and engineering personnel.

• Provide information and technical assistance to manufacturing, engineering, and production personnel as required.

• Develop documentation for each project and work with associated plant personnel to implement it.

• Structured problem solving methods such as KT, Designed Experimentation, and Six Sigma.

• Implement Process Control and Process Discipline systems into manufacturing operations.

• Analyze process data using statistical tools (e.g. pareto, regression, time charting, analysis of variance, gauge R&R, etc.).

• Review and interpret data to make recommendations on immediate actions, long term corrective actions, follow-up experiments, etc.

• Troubleshoot equipment and processes.

• Document all new ideas for possible patent submission.



Required Skills

1. 3-5 years experienced in process development.

2. Proficient project management skills, including managing multiple projects simultaneously.

3. Advanced use of MS Office (Excel, Word, Project, PowerPoint)



Desired Skills

• Design products or manufacturing processes using CAD (Pro Engineer a PLUS)

• Problem solving – some level of experience in the use of DOE, SPC, Six Sigma and other process control/ analysis techniques.

• Capable of performing complex data analysis using MS excel (SPC), JMP, or Minitab software

• Familiar with fiber optic theory (a PLUS)

• Fluent in foreign languages: Spanish, Chinese, and Polish (a PLUS)



Education and Experience

• BS in an applicable engineering discipline.



Soft Skills

• Strong written and oral communication skills.

• Personal initiative and commitment.

• Organized with good planning and time management skills.

• Ability to build relationships within cross functional groups; team building skills, positive attitude, flexible and good work ethic

 
Job Number: 18-05399
Job Location: Fort Worth, TX
Rate: 45.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2019-02-18 00:00:00.0
Start Date: 2018-02-19 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Anthony Kees
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Information System Security Officer (ISSO) with active secret / (Security+ CE, CAP, GSLC, CASP CE, CISA, CISM, or CISSP) is required FL

Description:
7631875

Job Title: Information System Security Officer (ISSO)

Number of Positions: 1

Remaining Positions: 1

Duties:
** An active SECRET (or higher) DoD Security Clearance is required **



** A current DoD 8570 Baseline Certification (Security+ CE, CAP, GSLC, CASP CE, CISA, CISM, or CISSP) is required **



** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



-The ISSO is responsible for ensuring the appropriate operational security posture is maintained for an information system (IS) and as such, works in close collaboration with the Information System Security Manager (ISSM).

-The ISSO shall have the detailed knowledge and expertise required to manage the security aspects of an IS and is assigned responsibility for the day-to-day security operations of a system.

-Responsibilities also include physical and environmental protection, personnel security, incident handling, and security training and awareness.

-In close coordination with the ISSM, the ISSO plays an active role in monitoring a system and its environment of operation to include developing and updating the System Security Plan (SSP), managing and controlling changes to the system, and assessing the security impact of those changes.



Responsibilities of the ISSO include, but are not limited to:

a. Ensure systems are operated, maintained, and disposed of in accordance with security policies and procedures as outlined in the security authorization package;

b. Attend technical and security training (e.g., operating system, networking, security management) relative to assigned duties;

c. Ensure all users have the requisite security clearances, authorization, need-to-know, and are aware of their security responsibilities before granting access to the IS;

d. Report all security-related incidents to the ISSM;

e. Conduct periodic reviews of ISs to ensure compliance with the security authorization package;

f. Serve as member of the CCB, if designated by the ISSM;

g. Coordinate any changes or modifications to hardware, software, or firmware of a system with the ISSM prior to the change;

h. Formally notify the ISSM when changes occur that might affect system authorization;

i. Monitor system recovery processes to ensure security features and procedures are properly restored and functioning correctly;

j. Ensure all IS security-related documentation is current and accessible to properly authorized individuals;

k. Ensure audit records are collected and reviewed; and

l. ISSO shall be adequately trained and possesses technical competence commensurate with the complexity of the ISs.

Skills:
Minimum Qualifications

- Current SECRET (or higher) DoD Security Clearance

- Current DoD 8570 Baseline Certification (Security+ CE, CAP, GSLC, CASP CE, CISA, CISM, or CISSP)

- Experience with Microsoft Windows and/or Linux system administration (2+ years)

- Familiarity with configuration control and change management (SCCM)

- Experience with networking concepts (switches, network security, TACLANE)

- Experience with security concepts (Data Loss Prevention, Active Directory, and Security Log Analysis)

- Active and continuous learner - either higher education or Continuing Professional Education



Required Competencies

- Strong written and verbal communication skills; ability to present reports to management; motivated to thoroughly investigate, analyze, and document system issues and resolutions

- Ability to produce quality deliverables and to complete assigned projects on time; provides consistent status updates to ensure IT security projects stay focused

- Consistent attention to detail - completes tasks per standard operating procedures; reports discovered anomalies and inconsistencies

- Persistent and creative problem solver - strong troubleshooting skills and determined to find solutions to technical problems; identifies root cause and presents possible solutions to management

- Strong work ethic and a proven professional - respectful, dependable, takes initiative and follows through, dedicated to excellence and getting the job done



Preferred Competencies

- Operating System and networking certifications

- Knowledge of and experience with compliance to government regulations and standards (NIST Special Publications, NISPOM, Risk Management Framework, etc.)

- Direct experience with a Department of Defense (DoD) or Defense Industrial Base (DIB) company supporting critical information systems



Additional Details

The ideal candidate for this position must be able to:

- Report to work on time

- Perform job duties for a specific duration of time or within a given period of time

- Follow directions based on government requirements and company policies

- Interact well with co-workers and customers

- Accept constructive criticism

- Maintain regular/consistent attendance and a full-time schedule

- Maintain current status on projects

- Stay current on training requirements

- Solve issues and incidents in the field and be willing to work after hours as needed to complete an urgent and important task

- Effective service depends upon the contractors performing duties to the best of their abilities; frequent absences will disrupt business operations and create additional work for coworkers; prompt and regular attendance is critical to the success of the company's mission.



Education:
- Undergraduate degree in Information Technology or Cyber Security, but candidate with proven experience will not be excluded from consideration

- Current DoD 8570 Baseline Certification (Security+ CE, CAP, GSLC, CASP CE, CISA, CISM, or CISSP)



Languages:
English Read Write Speak
Certifications & Licenses:
CISA
CISM
CISSP
Security+

Skills:
Required
CISMCISSPDODBUSINESS OPERATIONSCISA
Additional
NETWORKINGNISTOPERATIONSPASSPORTPROBLEM SOLVERRISK MANAGEMENTSECURITYSECURITY PLANSECURITY POLICIESSOLUTIONSSYSTEM SECURITYTRAININGACTIVE DIRECTORYAUDITCHANGE MANAGEMENTCYBER SECURITYDATA LOSS PREVENTIONDOCUMENTATIONEXCELLENT WRITTEN AND VERBAL COMMUNICATION SKILLSFIRMWAREISSLINUXLOSS PREVENTIONMICROSOFT WINDOWSNETWORK SECURITYSYSTEM ADMINISTRATIONSYSTEMS ADMINISTRATIONTRADING

Minimum Degree Required: Master's Degree

State/Province: Florida
City/Town: Jupiter

Start Date: 01/08/2018 Hours Per Week: 40.00
Est. End Date: 06/29/2018 Hours Per Day: 8.00
Schedule Notes: Days Per Week: 5.00
 
Job Number: MB-7631875
Job Location: Jupiter, FL
Rate: 72/hr max
Per Diem: no
Duration: 6 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Integrated Fluid Systems Propulsion/Mechanical Contract

Description:
IFS (Integrated Fluid Systems) Propulsion/Mechanical Contract

Location: Denver, CO
Pay Rate: DOE
Duration: 1 year W2 contract
Shift: not specified, exempt OT
**MUST be a U.S. CITIZEN**

Job Description
1. Contract Labor job description
a. Required: Mechanical or Aerospace engineering degree (BS) or equivalent
b. Required: Experience in the design, operation and/or control of pneumatic systems or cryogenic fluid systems that are used to transfer liquid nitrogen, liquid oxygen, liquid hydrogen and/or liquid natural gas.
c. Required: Experience working in a team environment
d. Required: Excellent communication skills
e. Optional: Experience in testing and debugging software
f. Optional: Experience with launch vehicle design and/or operation
g. Optional: Experience with developing requirements/procedures for automated operations
2. Expected deliverables
a. The following are the deliverables in support of the Common Avionics Integrated Fluid Systems Development and Qualification:
i. Verification that the ground system software meets all operational requirements for the Propulsion Systems
ii. Real time troubleshooting where software deficiencies are detected during system simulations conducted with the software team
 
Job Number: 8434
Job Location: Denver, CO
Rate: DOE
Per Diem: Split Possible
Overtime: Exempt
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Lead Checker IV - (AZ)

Description:
Lead Checker Position / Must have extensive checking experience / Must be highly skilled in CATIA & Industry Standards.

Develops program and project requirements, develops highly complex equipment and tooling concepts and designs solutions, including alternatives for the Production System. Validates analysis of technical data, influences product engineering design and makes robotics, automation or technical recommendations to support production system integration for a aerospace products. Leads the creation and modification of equipment and tooling definition at the program level. Executes project plans, provides input to Make/Buy decisions and partners with Procurement to meet program schedule, cost and quality targets. Ensures compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Leads gated reviews and develops plans for production readiness, preventative maintenance and spares. Validates contractual performance milestones. Develops and implements work-arounds and maintains configuration of hardware, software and documentation. Conducts studies and make recommendation for disposition of assets.

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

ACS Group (formerly 'Comforce')
 
Job Number: CheckerAZ
Job Location: Mesa, AZ
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Liaison MRB / Product Review Engineer III (OH)

Description:
Active Secret Clearance, NOT REQUIRED to start.

Applies knowledge of Boeing design principles to assess and resolve product/process issues in the repair and manufacturing testing of electronic circuits and electrical assemblies for the Electronics program. Analyzes, conducts root cause analysis and develops dispositions for design non-conformances. Applies engineering principles to research technical, operational and quality issues that cannot be resolved by customer and designs interim and final engineering solutions. Identifies documents, analyzes reported problems and communicates deviations that could impact design intent and safety; recommends and manages resolution. Develops and implements product/process improvements. Ensures supplier and build partner compliance with Boeing standards. Develops customer correspondence for continued safe operation and maintenance of equipment.

Expected Duties
Reviewing and evaluating functional and performance test data for electrical and electronics circuits and electrical assemblies against their acceptance criteria. Troubleshoot electronics and electrical assemblies and identify defects to next subassembly. Disposition defects for appropriate repairs and rework.
Collect and evaluate data on customer findings for product/process improvement opportunities that may include recurrent product support issues.
Participates in Material Review Boards and Integrated Product Teams (IPTs). Provide Engineering support for material review activities on electronic and electronic components by performing Engineering investigation of requirements traces, generating supplier statement of work documents for vendor repair, resolving technical issues at vendors, coordinating technical activities with multifunctional teams.
Lead the technical evaluation of vendors proposed plans by reviewing vendor acceptance test procedures for compliance to requirements and review of vendor rework findings to determine if failure has been verified.

Must be capable of utilizing: schematics, software descriptions, historical data, electronic and electrical device functional descriptions, technical manuals, automated test equipment, standard lab equipment.

Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

ACS Group (formerly 'Comforce')
 
Job Number: MRBoh
Job Location: Heath, OH
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Machine & Tool Designer (Secret Clearance)

Description:

Active Secret Clearance REQUIRED


USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net ____________________________________________________________________


Responsibilities include but are not limited to the following: 



  • Develop tooling and machine design concepts and support Tool and Machine Design Engineers in creating 3D models and drawings in TcUA (Product lifecycle management system) 

  • Insure models and drawings meet all department standards and customer requirements. 

  • Present models and drawings in design reviews to ensure safety, quality, delivery, cost objectives and customer satisfaction with design from all team members. 

  • Manage multiple projects and customers while creating efficient designs to meet the program cost and schedule requirements. 

  • Work with internal customers to concept needed support equipment for new and existing programs. 

  • Work closely with Tool and Machine Design Engineers to create final drawings and meet design costs and schedules. 


 


Requirements: 



  • 4 year BS Design and Drafting or equivalent experience 

  • Working knowledge of GD&T. 

  • Familiar with machine design and aircraft tooling. 

  • Experience with model checking for accuracy and model integrity. 

  • Experience with creating drawings. 

  • CATIA V5, TcUA, NX or other 3D modeling software a plus. 


 


 

















Compensation



Benefits



Diversity/EEO



The mentioned pay rate range for this opportunity is the 'target' range set by our client. Although USPRO presents candidates to our clients regardless of what their compensation demands are, the higher your rate is above this range, the lower the chance is for consideration



401K Retirement Plan & Medical Insurance is available for candidates who qualify



USPRO is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees!




 


 













Partial Aerospace & Defense Client List



BAE Systems


Gulfstream Aerospace


Moog Inc.


Sikorsky Aircraft - Lockheed Martin


Orbital ATK


Rockwell Collins


Spirit AeroSystems




 
Job Number: O6820283
Job Location: Clearfield, UT
Rate: 40-50
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESC STAFFING
Attention: Brad McInnis
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Maintainability Eng III

Description:
Maintainability Eng III
Savannah, GA
Rate: $58-$63

Unique Skills:

Prior experience in development of Maintainability Predictions and analysis per MIL-HDBK-472, Human Engineering Design Guidelines per MIL-HDBK-759, Mean-Time-To-Repair (MTTR), assessing aircraft modifications for Maintainability impacts, CATIA V5 including Human Builder & Kinematics, and Reliasoft reliability & maintainability software are desired. Candidates with prior US military aircraft maintainer or air crew experience strongly preferred.


Education and Experience Requirements:

Bachelors degree in aviation maintenance, engineering technology, or a related curriculum; or an equivalent combination of education and experience sufficient to perform the essential functions of the job. A&P license preferred. Six (6) years of Maintenance Programs/Maintainability experience or aircraft maintenance and operational experience.

Position Purpose:

Responsible for participating in the planning, development, and sustainment of Company Aircraft Maintenance Programs and related issues regardless of complexity.

Principal Duties and Responsibilities:

Essential Functions: 1. Share responsibility for planning, developing, and sustainment of new and existing Aircraft Maintenance Programs and engineering projects of major complexity within established scope, meeting requirements of FAR 25.1529 or other applicable regulatory directives. 2. Maintain a current knowledge of developments in the field of specialty and/or other related aircraft fields and provide recommendations to department management for process/procedure changes to prepare for new standards and implementation of new methodologies. 3. Meet cost and schedule requirements while ensuring accuracy and consistency. 4. Develop standards and guides to support Maintenance Programs activities. 5. Mentor other team members in areas relative to Maintenance Programs processes and procedures. 6. Engage with internal/external stakeholders to ensure department deliverables are being met or exceeded. 7. Recommend innovations that improve collaboration, communication, quality, and/or effectiveness of product. 8. Review, and provide feedback on written work of team members. 9. Perform other duties as assigned.

Other Requirements: 1. Demonstrated in-depth knowledge of MSG-3 and Maintenance Review board (MRB) processes and methodology.
 
Job Number: 8313
Job Location: Savannah, GA
Rate: $58-$63
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Maintainability Engineer

Description:
Position Purpose:
Responsible for participating in the planning, development, and sustainment of Aircraft Maintenance Programs and related issues regardless of complexity.

Unique Skills:
• Prior experience in development of Maintainability Predictions and analysis per MIL-HDBK-472, Human Engineering Design Guidelines per MIL-HDBK-759, Mean-Time-To-Repair (MTTR), assessing aircraft modifications for Maintainability impacts, CATIA V5 including Human Builder & Kinematics, and Reliasoft reliability & maintainability software are desired.
• Candidates with prior US military aircraft maintainer or air crew experience strongly preferred.

Education and Experience Requirements:
• Bachelor’s degree in aviation maintenance, engineering technology, or a related curriculum; or an equivalent combination of education and experience sufficient to perform the essential functions of the job. A&P license preferred.
• Six (6) years of Maintenance Programs/Maintainability experience or aircraft maintenance and operational experience.

Principal Duties and Responsibilities:
• Share responsibility for planning, developing, and sustainment of new and existing Aircraft Maintenance Programs and engineering projects of major complexity within established scope, meeting requirements of FAR 25.1529 or other applicable regulatory directives.
• Maintain a current knowledge of developments in the field of specialty and/or other related aircraft fields and provide recommendations to department management for process/procedure changes to prepare for new standards and implementation of new methodologies.
• Meet cost and schedule requirements while ensuring accuracy and consistency.
• Develop standards and guides to support Maintenance Programs activities.
• Mentor other team members in areas relative to Maintenance Programs processes and procedures.
• Engage with internal/external stakeholders to ensure department deliverables are being met or exceeded.
• Recommend innovations that improve collaboration, communication, quality, and/or effectiveness of product.
• Review, and provide feedback on written work of team members.
• Demonstrated in-depth knowledge of MSG-3 and Maintenance Review board (MRB) processes and methodology.
 
Job Number: 24-219
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer (15 plus needed)

Description:
Unique Skills:
• Catia V5, SAP and Solumina experience.

Principal Duties And Responsibilities:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform producibility studies from engineering drawings.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• Utilize CADAM/CATIA data and nesting software to generate flat patterns, Master Models, NC data, and ply nests to meet Engineering and Manufacturing requirements.
• With minimal supervision, lead/coordinate the implementation of projects between multiple organizations
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Support all Safety, Sustainability and Ergonomic Initiatives.
• Aid in development and maintenance of Business Continuity Plan.

Other Requirements:
• Proven knowledge of Lean and/or Six Sigma principles.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc.
• Lean Six Sigma Greenbelt Certification or higher preferred.

Experience/Education:
• Bachelors degree in Mechanical, Manufacturing Engineering or related curriculum, or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Three (3) years Manufacturing Engineering, planning, or related technical experience.
 
Job Number: 24-206
Job Location: Savannah, GA
Rate: $50 - $55
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Savannah, GA
Rate: $50-$55
Long Term contract
1st Shift



Unique Skills:
Knowledgeable with CATIA, SAP, Solumina software programs. Aircraft experience with aircraft shop support and creating work instructions.


Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.


Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 8217
Job Location: Savannah, GA
Rate: $50.00 -$55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Mechanical Design Engineer

Fort Worth, TX
1 Year Contract
Pay Rate: $48.25/Hr

Job Description:

• Report to a design lead on the 1018 program
• Perform and/or oversee aspects of engineering standard work throughout Preliminary Design, Detail Design, and Verification/Validation
• Coordination with functional leads to ensure product definition meets customer interface, functional, structural and performance requirements
• Must be fluent with detailed part and assembly definition (FTA) using Catia V5
• Ensure accuracy and adherence to Product Definition Standard Work in the communication of Design Intent through duties which includes: o Understand, apply and interpret Geometric Form Control to ASME Y14.5 & ASME 14.41 standards o Create / review parametric 3D models and other definition files to Design intent and Product Definition standard work using the Catia V5 software
• Types of hardware include products such as. o Hydraulic actuators o Oleo-Pneumatic shock struts (single and dual stage) o Landing gear assemblies o System routings (electrical and hydraulic)
• The engineer will create detail design, developmental and production mechanical documentation such as detail drawings, assembly drawings, engineering change incorporations as part of Technical Data Packages in accordance with contractual specifications and UTAS policies
• Product definition includes: o Associated parts list o Detailed part and assembly definition
• Experience with SMARTEAM PDM & MATRIX ONE for the approval and release of part definition and engineering changes (configuration management)
• Support drawing release schedule.
• Assist with driving improvements and harmonizing Acceptance Test Procedures using MS Word/MS Excel
• Drive improvements into daily activities, striving for right the first time and on time all the time (LEAN principles)
• Kinematics analysis using Catia V5
• Weight impact
• Tolerance stack-up evaluation

Basic Qualifications:

• ***BS in Mechanical or Aerospace Engineering***
• 10+ years design experience with a background in kinematics, mechanics and aeronautics.
• Proficient in Catia V5 detailed modeling (kinematics and systems routings a plus) and FTA generation, layouts and checking experience.
• Working knowledge of materials and surface treatments.
• Strong communication skills.
• US citizen, permanent resident alien or able to review all export-controlled technical information.
• Knowledgeable of hydraulic actuator/system design, forgings, layouts, mechanical system and structural design (fatigue and static).
• Proficient with GD&T (ASME Y14.5, ASME Y14.100 and Y14.41).
• Landing gear and/or hydraulic actuator design experience.
• Open minded, pro-active, quick learning ability and strong desire to learn
• Experience using SMARTeam – PDM
• Experience using MATRIX ONE – PLM
 
Job Number: 8507
Job Location: Fort Worth, TX
Rate: 48.25
Per Diem: No
Overtime: Possible
Duration: 1 Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer - Level 3

Description:
Location: Lexington, KY
Rate: $60.00 - $71.00/HR
Duration: 9 month contract position
Shift: 1st Shift

******MUST have an Active Secret Clearance or to have had one within the last 2 years******

Job Description:
******MUST have an Active Secret Clearance or to have had one within the last 2 years******
This job involves designing modifications for post production C-130 and potentially other fixed-wing aircraft by designing installations, integrations, modified parts, assemblies, and systems based on customer specifications. This position will interpret customer requirements then research, develop and document mechanical designs using applicable military specifications, ANSI/ASME or related design and drafting standards.

Skill/Experience/Education
Mandatory:
- Familiarity with ANSI/ASMEY14.100 or similar design and drafting standards
- 4+ years of experience with Catia V5 3D parametric modeling and drafting
- 4+ years of experience with Structural component and assembly design
- Perform detailed drawing checks and be responsible for completion of production ready drawings
- Ability to work under little or no direct supervision
- Demonstrated previous success working in a team based environment to meet objectives

Desired:
******MUST have an Active Secret Clearance or to have had one within the last 2 years******
- Any familiarity with structure of C130 aircraft, specifically C130J
- Air Force customer experience
- Experience or familiarity with engineering change documentation
- Experience with Teamcenter PLM software

.
 
Job Number: 8433
Job Location: Lexington, KY
Rate: $60.00 - $71.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineers - Lexington, KY

Description:
STS AeroStaff Services is hiring Mechanical Design Engineers in Lexington, Kentucky.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• This job involves designing modifications for post-production C-130 and potentially other fixed-wing aircraft by designing installations, integrations, modified parts, assemblies, and systems based on customer specifications
• This position will interpret customer requirements then research, develop and document mechanical designs using applicable military specifications, ANSI/ASME or related design and drafting standards

Basic Qualifications:

• Must have active clearance
• Familiarity with ANSI/ASMEY14.100 or similar design and drafting standards
• Experience with Catia V5 3D parametric modeling and drafting
• Perform detailed drawing checks and be responsible for completion of production ready drawings
• Ability to work under little or no direct supervision
• Demonstrated previous success working in a team based environment to meet objectives

Preferred Qualifications:

• Any familiarity with structure of C130 aircraft, specifically C130J
• Air Force customer experience
• Experience or familiarity with engineering change documentation
• Experience with Teamcenter PLM software
• Active DoD secret clearance

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 41479
Job Location: Lexington, KY
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Designer

Description:
Job Title: Mechanical Designer



Major purpose: In this dynamic role you'll use 3-Dimensional (3D) CAD software to design electro-mechanical components and create detail drawings, assembly drawings, sketches & diagrams. You must be familiar with ASME drafting and drawing practice, and good with maintaining documents and files using PLM software.



Major functions: Your Day To Day Responsibilities:

• Use computer assisted design/drafting (CAD) equipment and software (Inventor) to develop mechanical and electro-mechanical solutions using standard industry principles for product design.

• Design mechanical and electromechanical assemblies using design for manufacturing (DFM), design for assembly (DFA) principles.

• Create and revises production electro-mechanical drawings (assembly drawings with details).

• Generate mechanical drawings for use in sheet metal, machining and weld operations.

• Make finished drawings, checks dimensions of parts, materials to be used, and component relationships. Sketches rough layout of design concept and computes angles, weights, surface areas, dimensions, radii, clearances, tolerances, leverages and location of holes. Draft detailed multiview drawings of assemblies and products. Draws finished designs from sketches utilizing solid models and layouts.

• Utilize knowledge of various machines, engineering practices, mathematics, raw materials, processes and other physical sciences to complete drawings.

• Update Drafting / Engineering Standards, make source control drawings.

• Create and process engineering change notices.

• Troubleshoot and evaluate mechanical and electromechanical product manufacturing issues. Revise documentation as needed.

• Communicate with QA, Engineering, Vendors, Buyers and Manufacturing departments regarding new and revised drawings.

• Build BOMs (Bill of Materials), resolve manufacturing issues, and implements ECRs and ECOs (Engineering Change Requests, Engineering Change Orders).

• Travel and working off-site at another location may be required.

Technical/Functional skills:



Education/Experience/Licenses etc.: Your Education/Experience Includes:

• 5-10+ years of experience working with the design and manufacture of electro-mechanical products using 3D CAD software (Inventor).

• Knowledge of military standards and specifications is a plus.

• Associates Degree or College Degree preferred.

• Mechanical aptitude with ability to complete mathematical calculations - plane and solid geometry and trigonometry, fractions, percentages, ratios, proportions and measurements.

THIS POSITION DOES NOT OFFER RELOCATION ASSISTANCE



 
 
Job Number: 18-02961
Job Location: Ayer, MA
Rate: 39.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2018-05-31 00:00:00
Start Date: 2018-01-29 00:00:00
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Brandon Taheri
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
Mechanical Engineer

Cape Canaveral, FL
1 Year Contract
Pay Rate: DOE

Job Description / Responsibilities:
The Mechanical Engineer will produce moderately-complex technical designs and some analysis mechanical / structural modifications to new and existing facility related systems in support of ULA Atlas V, Delta IV and future Vulcan Launch Operations at Cape Canaveral Air Force Station Florida. The successful candidate, as part of ULA’s Engineering and Infrastructure Team, shall be required to produce accurate and detailed design drawings as well as generate validating stress analysis calculations. He/she will gather information, perform field walk-downs, and create or revise electronic CAD files. Projects typically involve implementations being performed by external Contractors, in accordance with construction documents. Project support will also include generation of Statement of Work, Contractor contract documents for schedule integration, fabrication and installation phases. The successful candidate will be required to coordinate multiple construction activities and project schedules around launch activities. The candidate shall possess and apply knowledge and technical expertise to the design, analysis, and maintenance of facility related mechanical and electromechanical products and systems. The successful candidate should have at least 10 years of relevant design and analysis experience in building and/or modifying large industrial facility mechanical systems. The desired experience shall be in the following areas; water piping and plumbing, mechanical hydraulic systems, fire protection systems and light structural design. A smaller percentage of the work will involve the design and analysis of facility HVAC systems and mechanical components of support equipment and facility platform systems.

Skills:
This position requires knowledge of predominantly mechanical design, analysis and drafting practices and a sound practical knowledge of engineering principles, practices, and industry standards. At least 10 years of recent Autodesk AutoCAD experience. He/she shall have analysis experience using STAAD and/or RISA, Femap – NX Nastran and be able to create stress calculations by hand with Excel or MathCAD. Other 3D modeling and design experience in Autodesk Inventor, Autodesk Revit or other Building Information Modeling (BIM) software is highly preferred.

Educational and Professional Qualifications:
Bachelors degree from an accredited college in Mechanical Engineering is preferred. A related discipline degree, or equivalent experience/combined education, with 10+ years of professional experience. Professional Engineering registration in the State of Florida is preferred, although not required.
 
Job Number: 8430
Job Location: Cape Canaveral, FL
Rate: DOE
Per Diem: Possible Split
Overtime: Exempt
Duration: 1 Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer – Robotics – Automation

Description:
Mechanical Engineer – Robotics – Automation

Location: Seattle, Washington 98103

Terms: 4 Open Positions – Long Term Contract Employment – Direct or Perm is an Option!

As our operations continue to grow, its becoming ever more important to automated our infrastructure for deploying and operating at scale. We have developed a portfolio of automation projects that span manufacturing, supply chain, and datacenter operations. We are looking for motivated professionals with experience designing complex automated systems in CAD. From component level detail to factory layout and optimization.

Requirements:

Minimum 10+ years professional experience in CAD Design
Solidworks, AutoCAD, Creo/ProE computer aided design systems
Layout planning and optimization
Geometric Dimensioning and Tolerancing
Nice to Haves:

Minimum 2+ years developing robotic, mechatronic, or material handling systems in a field related to manufacturing or logistics
Certification: CSWA, CSWP, CSWE, CPPA, ACP
Controls systems
Statistical modeling
Understanding Robot kinematics and Work Envelope
Material control dynamics and principles
Rate and systems throughput modeling
Top 3 Daily Responsibilities:

Work with senior engineering staff to define product specifications.
Use CAD software such as AutoCad, Inventor, Solidworks, or ProE to design building scale automation systems, components, robotic work cells
Document design details and make schematic drawings for contracting components from suppliers.
Overall Responsibilities:

You will work with Automation Systems team to define product specifications for robotics, autonomous vehicles, and material handling systems.
Convert those specifications to virtual models in Solidworks, Autodesk, or ProE computer aided design software.
Generate design details and schematic drawings from the virtual models for contracting from our supply base.
Test and measure components and systems to ensure they meet design standards.
Education Requirements:

B.S. in Mechanical Engineering (or equivalent engineering degree could be acceptable).

Without a degree, candidate would be possible with trade certification in certified Solidworks professional (CSWP) or expert (CSWE)
 
Job Number: 376336
Job Location: Seattle, WA
Rate: 62.00
Per Diem: No
Overtime: Possible
Duration: 12 Mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: CDI CORPORATION
Attention: Kris Douglas
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
N/C Programmer - (WA)

Description:
Provides numerical control, machining and programming technical experience. Establishes technical requirements for manufacturing and producibility. Plans, creates, verifies and revises Machine Control Data (MCD), geometry and documentation that directs the operations for a complete spectrum of numerically controlled equipment required to manufacture and inspect parts, tools and assemblies for departmental work. Plans and guides the development and integration of new machining techniques and manufacturing methods, processes, software and equipment. Works under general direction. NC Programmer with the following skills:
1. 1+ year experience using MetrologXG version software to program Coordinate Measurement Machine (CMM)
2. Preferred: Experience programming dual armed CMM using Metrolog software
3. Skilled in knowledge and interpretation of Geometric Dimension and Tolerancing (GDT)
4. 2+ years working with CATIA (or other Model Based Definition (MBD) software to access released engineering models and interrogate them for GDT and calculated measurements

AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience. 1+ year experience using MetrologXG version software to program Coordinate Measurement Machine (CMM). Preferred: Experience programming dual armed CMM using Metrolog software.

ACS Group (formerly 'Comforce')
 
Job Number: NCpuyallup
Job Location: Puyallup, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NC Programmer (Active Secret Clearance Required)

Description:
Job Type: W2 - Contract

Job Duration: 1 Year with possible extension

Program: Air Force - Long Range Strike Bomber Program (LRS-B) - B-21 Raider

Work Authorization: Active Secret Clearance issued by the Department of Defense is REQUIRED and the last investigation must have been completed within the past 6 years to be eligible for the Special Access Clearance for this program (SAP)

Hourly Rate: Dependent on Experience, Negotiable

Per Diem: Available for eligible applicants

Bonus: 1 week's pay - 20% paid after 1st two weeks, remaining 80% paid out at the end of the project or 6 months, whichever comes first

Holiday Pay: 6 Paid Holidays - (New Year’s Day, Memorial Day, Independence Day, Labor Day, Thanksgiving Day, Christmas Day)


Manager Notes:
Manager would like contractor to start anytime between 2/16/18 and 3/30/2018. May be able to start prior to Program Clearance. More than likely will target start date 6 weeks after offer acceptance.
REQUIRED ACTIVE DAY ONE DOD SECRET CLEARANCE WITH RECENT INVESTIGATION (WITHIN THE LAST 6 YEARS)

Description:
Provides numerical control, machining, and programming technical expertise to cross-functional engineering and manufacturing teams. Establishes technical requirements for manufacturing and producibility.
Plans, creates, verifies, and revises machine control data and documentation that directs the operations for numerically controlled machines and robots required to manufacture and inspect parts, tools and assemblies.
Plans and guides the development and integration of new machining techniques and manufacturing methods, processes, and software.
Apply knowledge of engineering data, geometric dimensioning and tolerancing, and machine control languages in order to plan, create and revise machine-control data and associated inspection plans.
Ability to create and revise measuring machine programs and/or computer generated solid models, statistical process-control graphic aids, in-process inspection graphic aids, and key characteristics media.
Ability to create and/or validate machine-control data, inspection point coordinate data and documentation

Requirements:
REQUIRED ACTIVE DAY ONE DOD SECRET CLEARANCE WITH RECENT INVESTIGATION (WITHIN THE LAST 6 YEARS)
Bachelor's and 6 to 9 years' related work experience, a Master's degree and 4 to 7 years' related work experience or an equivalent combination of education and experience.
Required: Trim and Drill Experience
 
Job Number: S579046
Job Location: Wichita, KS
Rate: Open
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESC STAFFING
Attention: Brad McInnis
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NC Programmer (WA)

Description:
NC Programmer provides numerical control, machining and programming technical experience. Establishes technical requirements for manufacturing and producibility. Plans, creates, verifies and revises Machine Control Data (MCD), geometry and documentation that directs the operations for a complete spectrum of numerically controlled equipment required to manufacture and inspect parts, tools and assemblies for departmental work. Plans and guides the development and integration of new machining techniques and manufacturing methods, processes, software and equipment. Works under general direction. NC Programmer with the following skills. Experience using MetrologXG version software to program Coordinate Measurement Machine (CMM) Preferred: Experience programming dual armed CMM using Metrolog software Skilled in knowledge and interpretation of Geometric Dimension and Tolerancing (GDT) 2+ years working with CATIA (or other Model Based Definition (MBD) software to access released engineering models and interrogate them for GDT and calculated measurements AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.
 
Job Number: NCpuyallup
Job Location: Puyallup, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NC Programmer - Level 3 (OK)

Description:
Provides numerical control, machining, and programming technical expertise to cross-functional engineering and manufacturing teams. Establishes technical requirements for manufacturing and producibility.

Plans, creates, verifies, and revises machine control data and documentation that directs the operations for numerically controlled machines and robots required to manufacture and inspect parts, tools and assemblies.

Plans and guides the development and integration of new machining techniques and manufacturing methods, processes, and software.

Apply knowledge of engineering data, geometric dimensioning and tolerancing, and machine control languages in order to plan, create and revise machine-control data and associated inspection plans.

Ability to create and revise measuring machine programs and/or computer generated solid models, statistical process-control graphic aids, in-process inspection graphic aids, and key characteristics media.

Ability to create and/or validate machine-control data, inspection point coordinate data and documentation.

Education/Experience:
Bachelor's and 6 to 9 years' related work experience, a Master's degree and 4 to 7 years' related work experience or an equivalent combination of education and experience.

Must be available to work any shift
OT is as needed
Phone interviews will be conducted

SKILLS NEEDED:
SmartCam is needed
Strong 3/4 axis experience
Catia V5 is helpful but not needed
SAP is helpful but not needed

FOSTER DESIGN'S BENEFITS:
• Working for a 54-year old company
• Minimum 6 Paid Holidays
• Blue Cross Blue Shield – Group Medical Insurance Plan
• MetLife – Long Term Disability Insurance
• Immediate 401K participation, 1 year 100% vesting schedule, matching employer contribution
• Vacation Pay
• Paid Weekly (Direct Deposit)
 
Job Number: FD-580985OK
Job Location: McAlester, OK
Rate: $50.00/HR
Per Diem: Yes - Possible - plus possible split
Overtime: Yes, as needed
Duration: 6 Months or longer
Start Date: 02/16/2018
Input Date: 11/14/2020
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NC Programmer - Level 3 (OK)

Description:
Provides numerical control, machining, and programming technical expertise to cross-functional engineering and manufacturing teams. Establishes technical requirements for manufacturing and producibility.

Plans, creates, verifies, and revises machine control data and documentation that directs the operations for numerically controlled machines and robots required to manufacture and inspect parts, tools and assemblies.

Plans and guides the development and integration of new machining techniques and manufacturing methods, processes, and software.

Apply knowledge of engineering data, geometric dimensioning and tolerancing, and machine control languages in order to plan, create and revise machine-control data and associated inspection plans.

Ability to create and revise measuring machine programs and/or computer generated solid models, statistical process-control graphic aids, in-process inspection graphic aids, and key characteristics media.

Ability to create and/or validate machine-control data, inspection point coordinate data and documentation.

Education/Experience:
Bachelor's and 6 to 9 years' related work experience, a Master's degree and 4 to 7 years' related work experience or an equivalent combination of education and experience.

Must be available to work any shift
OT is as needed
Phone interviews will be conducted

SKILLS NEEDED:
SmartCam is needed
Strong 3/4 axis experience
Catia V5 is helpful but not needed
SAP is helpful but not needed

FOSTER DESIGN'S BENEFITS:
• Working for a 54-year old company
• Minimum 6 Paid Holidays
• Blue Cross Blue Shield – Group Medical Insurance Plan
• MetLife – Long Term Disability Insurance
• Immediate 401K participation, 1 year 100% vesting schedule, matching employer contribution
• Vacation Pay
• Paid Weekly (Direct Deposit)
 
Job Number: FD-580985OK
Job Location: McAlester, OK
Rate: $50.00/HR
Per Diem: Yes - Possible - plus possible split
Overtime: Yes, as needed
Duration: 6 Months or longer
Start Date: 03/09/2018
Input Date: 11/14/2020
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NDT Engineer Specialist

Description:
NDT Engineer Specialist

Savannah, GA
Long Term Contract
Pay Rate: DOE

Unique Skills:

NDT skills along with part 145 product support manual specialization.


Education and Experience Requirements:

Bachelors degree in engineering or technical curriculum; or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 10 years prior aerospace experience (Commercial, DOD Department of Defense) in NDT and quality systems (working with composites and metals in manufacturing, repair and inspection of aircraft, space systems, motorsports, marine or armament).

Position Purpose:

Leads successful completion of major NDT/engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services including advanced composites and metals processes specifically with regard to production testing criteria, equipment, methodology and specification development for production acceptance testing.

Principal Duties and Responsibilities:

Essential Functions:
1. Establish standards for and/or develop NDT procedures to ensure robust process control including the Gulfstream Shop Practice Manual or Service Manuals as assigned. 2. Lead root cause and corrective action of NDT related MRB to eliminate repetitive rework and continuously improve existing techniques balancing technical product, cost, and schedule. 3. Team leadership of cross-functional product teams (PDT). 4. Identify appropriate methods/techniques for NDT inspection of pre-cured/co-cured or manufactured composite and metals components/articles. 5. Measure and document the capabilities of production inspection methods relative to flaw size and type to support development of robust design incorporating NDT inspection capabilities. 6. Interpret Engineering drawings/requirements and develop recommendations for management and engineering staff to determine quality standards for nondestructive testing. 7. Develop and assess NDT evaluation technologies in support of new and existing programs and improve manufacturing process inspection using NDT methods. 8. Maintain current knowledge of developments in the field of composites and/or related manufacturing technologies in order to recommend innovations to improve quality and effectiveness of company products, equipment and services. 9. Provide certification and training services for Gulfstream as assigned.

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product. 2. Performs other duties as assigned.

Other Requirements:
1. Advanced degree in engineering or related curriculum preferred. 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline. 3. ASNT SNT-TC-1A - Level III (Qualified/Certified) preferred in all five principal Gulfstream NDT methods (Minimum 2 of 3 primary methods (ET, RT, and UT required). 4. Capable of operating data analysis and computer software for NDT testing.

Languages Required (in addition to English): None
 
Job Number: 8597
Job Location: Savannah, GA
Rate: DOE
Per Diem: Possible Split
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Piping Design Checker

Description:
•Piping Design in the Petrochemical Industry
•Minimum 3 years of Piping Design checking
•Proficient in 3D modeling utilizing either of the following software :
PDS E3D, PDMS. AutoCAD Plant 3D 2016 (or higher), or SP3D
Experience with Point Cloud technologies such as LFM Server or AutoCAD Recap
 
Job Location: LA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Piping Designer

Description:
•Proficient in 3D modeling utilizing either of the following software :
PDS E3D, PDMS. AutoCAD Plant 3D 2016 (or higher), or SP3D
•Proficient in Point Cloud technologies such as LFM Server or AutoCAD Recap.
•Capable of managing and overseeing beginner level designers
•Capable of communication with other disciplines and clients.
•Support field assignments and lead field walks as required.
•Capable of providing conceptual input/design during the planning stages of a project
•Able to perform administrative tasks of determining manpower, estimating and progressing design
 
Job Number: 41499
Job Location: LA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: John
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Software Engineer

Description:
Seeking a Senior SW Engineer with C/C++ development skills needed to support multiple programs.


Role and Responsibilities include the following areas:
• Execute to program requirements. Ensure that cost and schedule commitments are being met to ensure on time delivery of the end product deliverables
• Debug, troubleshoot, issue investigation, find root cause and provide corrective action determination to address integration issues
• Interface directly with Raytheon management team and customers in meetings and reviews
• Expand and influence program developments by working closely with the program managers and other engineers to process direction for the program
• Provide weekly reporting of key programmatic milestones in accordance with the program plan, while insuring risk mitigation throughout the program

Required Experience, Knowledge and/or Skills:
• 8 years software development experience
• Proven experience performing as a Senior SW Engineer for software development teams
• Proven experience in using Green Hills Integrity
• Proven experience spanning software architecture, design and system integration with experience developing embedded software utilizing C and C++
• Proven experience in leading teams using Waterfall and/or Agile Scrum methodology
• Proven experience in writing software test plan and test procedures
• Ability to support engineering team members on various programs
• Ability to multi-task, to support multiple customers, and to work within specific schedule and cost constraints
• Strong organizational skills and ability to motivate and lead a team
• Possess and demonstrate excellent interpersonal, presentation and verbal/written communication skills
• Excellent time management skills


Desired Experience, Knowledge, and/or Skills:
• Certified EVMS
• Experience working with IMS (Integrated Master Schedule)
• Experience with Green Hills Integrity
• Experience with KIV-7M product
• Experience with Raytheon’s Development Process
• Experience in Waterfall and Agile/Scrum, Continuous Integration Environments
• Experience with requirements management using DOORS
• Experience with configuration management using MKS and Git
• Software or Systems Engineering Integration expertise

Required Education Requirement: B.S. Computer Science, Computer Engineering, Software Engineering, Electrical Engineering or other Engineering discipline


Desired Education Requirement: M.S. in Computer Science, Computer Engineering, or Electrical Engineering
 
Job Number: 8006788
Job Location: El Segundo, CA
Rate: DOE
Duration: 12 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Maurice Bradford
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Software Engineer

Description:
The Software Engineering Center is seeking a Built in Test Engineer to work on next gen Tactical Airborne Sensor System.

Built In Test (BIT) Engineer Job Description:
Applicant needs to have experience with Real Time Embedded Systems in regards to Built-In-Test (BIT). The BIT suite of applications will need to provide confidence for correct operation of each module in various subsystems.

Required Skills:
- Startup-Up BIT (SBIT): Comprehensive testing of hardware and functionality during system startup. Needs to identify subsystem and module in the case of failure.
- Initiated BIT (IBIT): Manual BIT (intrusive). Halts current application and runs comprehensive tests and failure identification on system/module.
- Periodic BIT (PBIT): Non-intrusive tests that can be run while other applications are active.

Desired Skills:
- Device Driver
- Board Support Package
- Ability to use a logic analyzer and/or oscilloscope
- Knowledge of EO/IR and RADAR systems

Required Education:
- B.S. Engineering Degree in either Computer Science or Electrical Engineering
 
Job Number: 8015551
Job Location: Canoga Park, CA
Rate: DOE
Duration: 12 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Maurice Bradford
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Software Enginer

Description:
Experience programing GPUs / CUDA. Able to implement Signal processing algorithms on GPU and access performance bottlenecks.
 
Job Number: 711
Job Location: El Segunda, CA
Rate: 75.00
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: UNIVERSAL STAFFING SERVICES
Attention: Nancy Boyce
Address: 628 HEBRON AVE STE 214
City, State: GLASTONBURY, CT 06033
Phone: 860/527-8135
Website: www.ussjobs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Test Engineer

Description:
Systems Integration and Test (I&T) Engineer to expend the existing team of engineers due to increase in demand for our services. The successful candidate will be responsible for the technical leadership, of I&T activities for assigned program(s).

Required Skills:
• Minimum 8 years of combined experience in the field of hardware/software development and Integration/Testing of complex systems
• Minimum of 2 years of experience in technical leadership, cost, and schedule management associated with integration and testing activities on complex programs
• Write highly complex test procedures and protocols to assess product reliability and evaluate the ability of products to meet performance standards and specifications
• Previous experience with real time embedded systems development and debugging
• Previous experience with systems requirements verification and validation process
• Develop complex test simulations to evaluate how products react under different conditions and analyze product failure to assess the integrity and reliability of product performance. Debugs complex test hardware and software
• Write test scripts such as python and LabView on complex test stations
• Understand networking protocols such as TCP/IP, UDP, ARP, and ICMP
• Prior experience in the technological spaces the work requires

Desired Skills:
• Experience with CMMI and EVMS processes

Required Education:
Bachelors in Computer Science, Computer Engineering, Electrical Engineering, or equivalent, advanced degree desirable
 
Job Number: 8006624
Job Location: El Segundo, CA
Rate: DOE
Duration: 12 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Maurice Bradford
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Process Engineer

Description:
Job Summary:
The successful candidate will work in a team environment to perform the following: process design, relief valve sizing, develop heat and material balances, process flow diagrams and piping and instrument diagrams, size and specify large scale petroleum refining equipment including reactors, fired heaters, pumps, compressors, heat exchangers, fractionation towers, piping and related equipment. The technologies involved will be diverse and cutting edge, spanning all aspects of modern refinery and petrochemical operations.

Job Description:
• Developing flow diagrams, relief valve sizing, heat and material balances, process design and assessment of mechanical equipment, hydraulic modeling, and design of over-pressure protection for new and existing equipment
• Engineering and process design for pressure vessels, tanks, pumps, and compressors
• Manage front end development through to final appropriation
• Managing multiple project, budgets and scope changes

Qualifications:
• Candidate must have a bachelor’s degree in Chemical Engineering
• Candidate must have a minimum of seven years’ experience in process engineering- including process design
• Candidate must have a background in refinery / petrochemical
• Candidate must be capable of working multiple projects at different phases of development at one time, OT may be required on occasion
• Candidate must have experience with process simulation
• Software experience includes ASPEN HYSYS, ProMax, PipeFlow
• Candidate must have excellent communication skills both- written and verbal.
• Candidate must be a self-starter, client focused, team player, and committed to technical excellence
• Critical thinking skills for problem solving, follow through
• Registered Louisiana P.E. a plus
 
Job Number: 41500
Job Location: Baton Rouge, LA
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: John Sabbagh
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Process Engineer

Description:
•Developing flow diagrams, relief valve sizing, heat and material balances, process design and assessment of mechanical equipment, hydraulic modeling, and design of over-pressure protection for new and existing equipment
•Engineering and process design for pressure vessels, tanks, pumps, and compressors
•Manage front end development through to final appropriation
•Managing multiple project, budgets and scope changes
Qualifications:
•Candidate must have a bachelor’s degree in Chemical Engineering
•Candidate must have a minimum of seven years’ experience in process engineering- including process design
•Candidate must have a background in refinery / petrochemical
•Candidate must be capable of working multiple projects at different phases of development at one time, OT may be required on occasion
•Candidate must have experience with process simulation
•Software experience includes ASPEN HYSYS, ProMax, PipeFlow
•Candidate must have excellent communication skills both- written and verbal.
•Candidate must be a self-starter, client focused, team player, and committed to technical excellence
•Critical thinking skills for problem solving, follow through
•Registered Louisiana P.E. a plus
 
Job Number: 41500
Job Location: LA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Design Engineer - Agricultural (KS)

Description:
This Client uses Creo 4 and Windchill for their CAD package, so that experience would be helpful, but any 3D modeling experience could work.

We need to fill 3 different spots:

1st position: focused on structures and analysis, FEA using pro-mechanica or similar software.

Summary
Designs, develops, improves, and tests agricultural products/equipment and provides engineering support for all aspects of assigned product line to ensure functionality, quality, cost, and schedule.

Essential Duties and Responsibilities-include the following. Other duties may be assigned that require other qualifications, physical demands, and/or work environment.

• Follows all Great Plains policies and OSHA safety regulations and wears prescribed safety and protective equipment.
• Assists with the development of the product design, manufacturing, and functionality.
• Identifies any problems with the implementation or available resources that may affect the schedule or budget and communicates such problems accordingly.
• Analyzes the risks of a new design or process and communicates results to the engineering manager.
• Provides support to manufacturing to ensure product is fabricated and assembled based on the intended functionality of the design.
• Develops and maintains procedures and processes that support core machine technologies.
• Interfaces with others in the organization and customers to jointly determine customer needs and solutions.
• Designs products and systems to interface machines, hardware, and software.
• Supervises preparation of product layout and detailed drawings and schematics.
• Implements the product design within the schedule and budget parameters.
• Supervises manufacturing or building of prototype product or system.
• Evaluate field testing and recommend design modifications to eliminate machine or system malfunctions.
• Plans and develops experimental test programs.
• Analyzes test data and reports to determine if design meets functional and performance specifications.
• Confers with research and other engineering personnel and prepares design modifications as required.
• Evaluates engineering test results for possible application to development of systems or other uses.
• Recommends measures to improve production methods, equipment performance, and quality of product to engineering manager.
• Recommends changes in working conditions and use of equipment to increase efficiency of shop, department, or work crew to engineering manager.

Supervisory Responsibilities
Supervisory Position: No

Qualifications- To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the principle knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Education and/or Experience
Level 6: Bachelor's degree (B. A.) from four-year college or university; or one to two years related experience and/or training; or equivalent combination of education and experience.

Language Skills
Level 4: Ability to analyze journals, technical procedures, or regulations. Write reports, correspondence, and procedure manuals. Effectively present information and respond to questions from groups of managers, customers, and the general public.

Mathematical Skills
Level 5: Mathematical concepts such as exponents, logarithms, quadratic equations, permutations, frequency distribution, test reliability and validity, and analysis of variance, correlation techniques, sampling theory, and factor analysis.

Reasoning Ability
Level 5: Define problems, collect data, establish facts, and draw valid conclusions. Interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.

Computer Skills
Level 2: Word processing, Internet, Email, Spreadsheets, Software Concepts, Hardware, Presentations, Graphics, Multimedia

Certificates, Licenses, Registrations
N/A

Other Skills and Abilities
N/A

Physical Demands- The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Physical Capacity Level
Level 4: Exerting 50 to 100 pounds of force occasionally, and/or 25 to 50 pounds of force frequently, and/or 10 to 20 pounds of force constantly.

Work Environment- The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Physical Capacity Level
Level 4: Exerting 50 to 100 pounds of force occasionally, and/or 25 to 50 pounds of force frequently, and/or 10 to 20 pounds of force constantly.

Work Environment- The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
 
Job Number: FD-020918KS
Job Location: Asseria, KS
Rate: $BOE/HR
Per Diem: No - Local Candidates Only
Overtime: Possible
Duration: 3-6 Months or Longer
Start Date: 03/19/2018
Input Date: 11/14/2020
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Instrument Project Engineer - Refinery Exp (TX)

Description:
THIS IS NOT FOR AN INTERN, THIS POSITION REQUIRES AT LEAST 10-15 YEARS OF EXPERIENCE.

Basic Function
An Instrument Project Engineer (IE) is responsible for the design and implementation of process instrumentation from initial conception through field installation. They are responsible for designs that provide the most reliable and cost-effective instrument systems. In addition, the IE provides consulting services to process designers in developing process design specifications, develops operating and training manuals for mechanical and process personnel and participates in training operating personnel.

An IE:
• Writes purchase and construction specifications and writes and performs Factory Acceptance Tests.
• Uses vendor software programs for sizing safety and control valves.
• Specifies, procures, and configures Programmable Logic Controllers (PLC) and field hardware such as transmitters, controllers, pneumatic and electronic transmission system.
• Utilizes standards and best practices from American Petroleum Institute (API) and International Society of Automation (ISA), National Fire Protection Association (NFPA) to perform the above functions.

Responsibilities.
The Instrument and Controls Engineer may be responsible for:
• Function as project engineer on instrumentation and capital projects and large maintenance projects.
• Taking lead role on Instrumentation and controls capital projects including PLCs.
• Help identify areas where instrumentation/controls can improve plant operations and profitability.
• Developing capital and expense budget requirements related to instrumentation system upgrades, PM/PdM programs, repairs, expansions, etc.
• Serving as a technical resource to properly identify new and existing equipment specifications and proper operating parameters/ranges for instrumentation equipment.
• Overseeing application and interpretation of National Electric Code and other applicable city, state, federal codes and standards (e.g. NPRA, NFPA, API, ISA).
• Interact with Engineering and Construction contractors, both on-site and off-site.
• Leverage the application of instrumentation safety standards, mechanical integrity, design and maintenance.
• Using documentation systems and processes that maintain accurate instrumentation information and drawings.
• Support criticality assessments of the plant's instrumentation equipment.
• Design and evaluate Refinery Safety Instrumented Systems (SIS). Perform Safety Integrity Level (SIL) analysis and engineering upgrades of safety instrumented systems.

Basic Required Qualifications.
• Must be legally authorized to work in the United States, at least 18 years of age and possess a valid driver’s license.
• Must possess a bachelor’s degree in Electrical Engineering, Chemical Engineering, Mechanical Engineering, or Industrial Engineering.
• Must have three or more years of instrumentation experience and three or more years of direct experience in a refinery, chemical and/or manufacturing industry.
• Demonstrated knowledge and use of SPI (InTools) database and specifications.
• Proficient in the specification, troubleshooting, maintenance and overhaul of process control values.
• Demonstrated knowledge of PLC's.
• Proficient in MS office (Word, Excel, Outlook, Projects).
• Must be willing and able to perform, comply with the following:
• Wear Nomex fire retardant clothing and personal protective equipment (such as steel-toe shoes, ear, and eye protection).
• Maintain face daily so that a respirator/face mask can seal properly (some examples include being free of facial hair and/or clean shaven), climb up to 200 feet in height and work in enclosed spaces such as tanks and silos

Preferred Qualifications:
• Industry certifications (ISA)

FOSTER DESIGN'S BENEFITS:
• Working for a 54-year old company
• Minimum 10 Paid Holidays with no waiting period
• Immediate 401K participation, 1 year 100% vesting schedule, matching employer contribution
• Free Financial Consultant
• Medical/Dental/Vision/Prescription card – BCBS
• MetLife – Long Term Disability Insurance
• Vacation Pay
• Per Diem Assignment Allowance, when applicable
• Per Diem Split, when applicable
• Paid Weekly (Direct Deposit)
 
Job Number: FD-021618TX
Job Location: Borger, TX
Rate: $BOE/HR
Per Diem: Possible
Overtime: Possible
Duration: 11 Months or linger
Start Date: 03/26/2018
Input Date: 11/14/2020
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Small Project Engineer - Refinery Exp (TX)

Description:
Small Projects - Project Engineer working under Supervision of a Project Manager

11 Months or longer

Responsibilities are:
• Direct the engineering contractor assigned to the project.
• Lead organization and execution of design reviews of engineering documents and models.
• Coordinate and reviews vendor documents.
• Interface with the Business Unit to obtain input into engineering.
• Assist in preparation of the Scope of Work for documents.
• Track and manage engineering progress.
• Engage Maintenance and Operations in both the FEL and execution phases.
• Facilitate constructability input into design.
• Participate in schedule and cost reviews for assigned work areas.
• Ensure specifications and internal standards are followed in design.
• Ensure Quality is integrated into the design documents.
• Support construction through review and responses to Requests For Information (RFI).
• Project MOC development and participate in system punch-listing, completion activities, and PSSRs.


Basic Requirements:
Required Skills and Competencies are:
• Bachelor’s Degree in Engineering.
• Basic understanding of the FEL project process and interactions required to execute a project.
• 3+ year’s work experience in an industrial process facility.
• Fundamental knowledge of processes and technical standards.
• Knowledgeable of industry codes & standards applicable to refineries such as API and NFPA.
• Software: AutoCAD, MS Office, MS Project
• Ability to specify appropriate equipment and material as well as evaluate alternatives.
• Understanding of the estimating process and developing budgets within a WBS.
• Experience in working with various Engineering disciplines.
• Good understanding of Safety and Environmental policies and processes.
• Interactive skills necessary to coordinate a team of technical professionals.
• Ability to effectively communicate with a diverse group of professionals.
• Fundamental understanding of Quality requirements and the role of Quality in the project.
• Ability to lead safety in the field and participates in field safety meetings and job safety analysis reviews

Preferred Skills and Competencies are:
• Familiar with SAP, Primavera, Icarus
• Experience with directing engineering contractors.
• Experience in the Operating and or Maintenance departments.
• Good communication and negotiation skills.
• Competent in written communications and presentations.
• Field experience in construction related activities.

FOSTER DESIGN'S BENEFITS:
• Working for a 54-year old company
• Minimum 10 Paid Holidays with no waiting period
• Immediate 401K participation, 1 year 100% vesting schedule, matching employer contribution
• Free Financial Consultant
• Medical/Dental/Vision/Prescription card – BCBS
• MetLife – Long Term Disability Insurance
• Vacation Pay
• Per Diem Assignment Allowance, when applicable
• Per Diem Split, when applicable
• Paid Weekly (Direct Deposit)
 
Job Number: FD-020318TX
Job Location: Borger, TX
Rate: $BOE/HR
Per Diem: Possible
Overtime: Possible
Duration: 11 Months or longer
Start Date: 04/02/2018
Input Date: 11/14/2020
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Propulsion Analysis Engineer (Centaur V)

Description:
Propulsion Analysis Engineer (Centaur V)

Location: Denver, CO
Pay Rate: DOE
Duration: 1 year W2 contract
Shift: not specified, exempt OT
**MUST be a U.S. CITIZEN**
Job Description
Performs fluids analysis at both the detailed component level and at the systems level. Fluids analyses are performed to define fluid states and conditions during system operations to verify adherence to requirements, and develops and verifies flight software parameters to control vehicle fluid systems. Develops specialized analytical tools as required to perform these functions. Develops procedures and plans for thermodynamic test programs when existing analytical capabilities are insufficient. Resolves issues related to thermodynamics that arise due to operational use in the field.

Basic Requirements
Bachelors Degree in Mechanical, Chemical, Aerospace or associated field of Engineering
10 years demonstrated ability to perform system-level thermodynamic and fluid mechanic analyses.
Capability to interpret system-level requirements, perform analysis to verify that those requirements are met, and document the verification results.
Ability to build analysis models and tools based on program needs.
NOTE: Relocation is not available

Preferred Qualifications
Candidate must have the ability to quickly understand and become proficient with various analysis tools and associated computer programs.
Experience with multiple software tools is desirable including ability to use Applied Flow Technology (AFT) suite of products, Matlab, SINDA/FLUINT, and Flow3D.
Demonstrated proficiency applying analysis results to hardware solutions is desirable
Ability to support test activities, including requirements definition, test planning, test, and test reporting is preferred
Experience with aerospace, and specifically space system, work is desirable including knowledge of cryogenic propulsion systems.
Risk management experience, including any human spaceflight experience, is desirable Works well in team environments and with minimum supervision
 
Job Number: 8436
Job Location: Denver, CO
Rate: DOE
Per Diem: Split Possible
Overtime: Exempt
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Propulsion Analysis Engineer (HCS)

Description:
Propulsion Analysis Engineer (HCS)

Location: Denver, CO
Pay Rate: DOE
Duration: 1 year W2 contract
Shift: not specified, exempt OT
**MUST be a U.S. CITIZEN**
Job Description
Performs fluids analysis at both the detailed component level and at the systems level. Fluids analyses are performed to define fluid states and conditions during system operations to verify adherence to requirements, and develops and verifies flight software parameters to control vehicle fluid systems. Develops specialized analytical tools as required to perform these functions. Develops procedures and plans for thermodynamic test programs when existing analytical capabilities are insufficient. Resolves issues related to thermodynamics that arise due to operational use in the field.

Basic Requirements
Bachelors Degree in Mechanical, Chemical, Aerospace or associated field of Engineering
10 years demonstrated ability to perform system-level thermodynamic and fluid mechanic analyses.
Capability to interpret system-level requirements, perform analysis to verify that those requirements are met, and document the verification results.
Ability to build analysis models and tools based on program needs.
NOTE: Relocation is not available
Preferred Qualifications
Candidate must have the ability to quickly understand and become proficient with various analysis tools and associated computer programs.
Experience with multiple software tools is desirable including ability to use Applied Flow Technology (AFT) suite of products (AFT Fathom, Impulse, and Arrow), Matlab, SINDA/FLUINT, Flow3D, Excel, and Visual Basic.
Demonstrated proficiency applying analysis results to hardware solutions is desirable
Ability to support test activities, including requirements definition, test planning, test, and test reporting is preferred
Experience with aerospace, and specifically space system, work is desirable including knowledge of cryogenic propulsion systems.
Risk management experience, including any human spaceflight experience, is desirable Works well in team environments and with minimum supervision
 
Job Number: 8437
Job Location: Denver, CO
Rate: DOE
Per Diem: Split Possible
Overtime: Exempt
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Propulsion Design Engineer

Description:
Propulsion Design Engineer

Location: Denver, CO
Duration: 11 months with possible contract to hire/Possible extension

Description:
Propulsion Design Engineers with a suggested mix of 3 Sr and 3 Jr experience engineers in either Integrated Fluid Systems Development & Qualification OR Propulsion System Component Design Team. Flexible of combination of experience (sr = 5-10 yr exp; jr = 3-5 yr exp). Would really prefer someone with cryogenics exp; read propulsion schematics.

Integrated Fluid Systems Development and Qualification:
Job Functions
- Develop systems integration solutions related to automated launch site ground operations
- Perform simulated countdown testing in Systems Integration Lab (SIL)
- Establishes functional and technical requirements for fluids related software, and ensures proper integration with other software and hardware systems and program operational requirements
- Interface with Launch Operations, Propulsion Design, Electrical Ground Support Equipment, Flight Software and Avionics
- Synthesizes all applicable vehicle, ground, and operational requirements into software or operational solutions that acknowledge technical, schedule, and cost constraints
- Develops, documents, tests, and maintains requirements for ground software
- Develops and documents mathematical rationale for software parameters
- Responsible for subsystem and integrated system level software verification by defining comprehensive software test plans and performing software testing in the SIL
- Reviews and performs analysis of applicable SIL and launch site data to ensure proper software functionality

Preferred Qualifications:
- A good understanding of fluids and thermodynamic principles, mechanical system design considerations, instrumentation usage, and other technical principles and concepts within the engineering field
- A significant breadth and depth of knowledge in the following systems: airborne pneumatic and propulsion systems, GSE commodities, airborne avionics, GC3 hardware, CCLS ground software
- Working knowledge of Test Requirement Documents (TRDs), hardware and operational limits, the Parameter Signal Measurement (PSM) database, Automated Data Monitoring System (ADMS), Microsoft Word and Microsoft Excel
- Familiar with good software testing practices to validate all nominal and off nominal logic paths, with an understanding of how software applications are structured, and a focus on the system level functionality
- Able to assimilate, master, and recall large amounts of detailed information as it applies to multiple system interfaces and interdependencies it in a variety of areas
- Detail oriented, focused on following through on all related tasks, with methodical and systematic problem solving and troubleshooting skills
- Launch site operations experience is a plus

Propulsion System Component Design:
This engineering function provides engineering design, systems integration, subcontract management, product technical support and anomaly resolution for the Propulsion fluids systems (cryogenic, non-cryogenic, hydraulics and pneumatics). This function develops sub-system and component designs and requirements to satisfy overall propulsion systems requirements. The position requires mechanical design capability as well as understanding dynamic, structural and fluids analysis concepts. Must have the capability to perform system integration and system level trade studies to optimize designs for manufacturing, producibility and performance. Generation of engineering drawings or changes as well as assembly and testing requirements is part of the job function. Provides direct support to the suppliers, the factory and the launch site to ensure production schedules are met, anomalies are resolved and operations are streamlined to improve efficiency. When anomalies occur, provides causal analysis that leads to effective resolution and corrective actions that prevent recurrence. Review the as-built product (hardware and associated software) and product test data to certify that the final product configuration and performance meets requirements and is ready for test and/or flight. Develops design improvements that reduce cost and risk and/or improve vehicle performance.
 
Job Number: 18-01807
Job Location: Denver, CO
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Robin
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Propulsion Design Engineer

Description:
Integrated Fluid Systems Development and Qualification:
Job Functions
• Develop systems integration solutions related to automated launch site ground operations
• Perform simulated countdown testing in Systems Integration Lab (SIL)
• Establishes functional and technical requirements for fluids related software, and ensures proper integration with other software and hardware systems and program operational requirements
• Interface with Launch Operations, Propulsion Design, Electrical Ground Support Equipment, Flight Software and Avionics
• Synthesizes all applicable vehicle, ground, and operational requirements into software or operational solutions that acknowledge technical, schedule, and cost constraints
• Develops, documents, tests, and maintains requirements for ground software
• Develops and documents mathematical rationale for software parameters
• Responsible for subsystem and integrated system level software verification by defining comprehensive software test plans and performing software testing in the SIL
• Reviews and performs analysis of applicable SIL and launch site data to ensure proper software functionality

Preferred Qualifications
• A good understanding of fluids and thermodynamic principles, mechanical system design considerations, instrumentation usage, and other technical principles and concepts within the engineering field
• A significant breadth and depth of knowledge in the following systems: airborne pneumatic and propulsion systems, GSE commodities, airborne avionics, GC3 hardware, CCLS ground software
• Working knowledge of Test Requirement Documents (TRDs), hardware and operational limits, the Parameter Signal Measurement (PSM) database, Automated Data Monitoring System (ADMS), Microsoft Word and Microsoft Excel
• Familiar with good software testing practices to validate all nominal and off nominal logic paths, with an understanding of how software applications are structured, and a focus on the system level functionality
• Able to assimilate, master, and recall large amounts of detailed information as it applies to multiple system interfaces and interdependencies it in a variety of areas
• Detail oriented, focused on following through on all related tasks, with methodical and systematic problem solving and troubleshooting skills
• Launch site operations experience is a plus

Propulsion System Component Design:
 This engineering function provides engineering design, systems integration, subcontract management, product technical support and anomaly resolution for the Propulsion fluids systems (cryogenic, non-cryogenic, hydraulics and pneumatics). This function develops sub-system and component designs and requirements to satisfy overall propulsion systems requirements. The position requires mechanical design capability as well as understanding dynamic, structural and fluids analysis concepts. Must have the capability to perform system integration and system level trade studies to optimize designs for manufacturing, producibility and performance. Generation of engineering drawings or changes as well as assembly and testing requirements is part of the job function. Provides direct support to the suppliers, the factory and the launch site to ensure production schedules are met, anomalies are resolved and operations are streamlined to improve efficiency. When anomalies occur, provides causal analysis that leads to effective resolution and corrective actions that prevent recurrence. Review the as-built product (hardware and associated software) and product test data to certify that the final product configuration and performance meets requirements and is ready for test and/or flight. Develops design improvements that reduce cost and risk and/or improve vehicle performance.
 
Job Number: 18-00001
Job Location: Denver, CO
Per Diem: Split
Overtime: possible
Duration: 10 months
Start Date: 2/16/18
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 859 STEPHENSON HWY
City, State: TROY, MI 48083
Phone: 843/955-9221
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
QA Certification Specialist II

Description:
QA Certification Specialist II

Location: Savannah, GA
Pay Rate: $50/hr
Duration: Long Term Contract
Shift: First, Flexible Schedule

Unique Skills:
-Working knowledge of FAA regulations and Aircraft Certification processes in a Type Certificate program.
-Detail oriented and able to evaluate data for inconsistencies within tables, reports, technical documentation and other records required to support conformity process.
-Flexibility to work varied hours or weekends as necessary to support aircraft testing schedule.
-Prepares reports, creates test tracking using data from various company systems.
-Experience working with SAP, Solumina, SmarTeam and MS Excel desired.
-Demonstrated experience with data validations, data integrity and regulatory reporting desired

Education and Experience Requirements:
Bachelors degree in Engineering, aviation sciences, quality systems or related field; or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Two years related technical experience of continually increasing responsibility.

Position Purpose:
In a team oriented environment, performs all tasks in area of responsibility in a timely and efficient manner to support aircraft certification activities performed by FAA Principle Inspectors or Company ODA IARs. Ensures the article and all associated data supports and presented for certification meets requirements in accordance with the approved Quality Assurance System and the ODA (ODA-511131-CE) Operations Manual.

Principal Duties and Responsibilities/Essential Functions:
1. Coordinates article & aircraft certification activities to program schedule and milestones.
2. Manipulates and maintains large data sets related to configuration, article traceability and conformity of aircraft to determine status and compare to schedule and objectives.
3. Prepares and/or reviews data packages prior to submission in accordance with ODA/FAA requirements.
4. Performs data evaluation, interrogation and correlation of data between electronic systems.
5. Identifies abnormal data trends or changes, works with internal and external organizations to facilitate resolution.
6. Interprets engineering configuration data relative to manufacturing planning and deviations.
7. Monitors completion of certification tasks to ensure completion to program requirements and schedules.
8. Participates in team process improvement team projects both internal and external to quality.

Additional Functions:
1. Actively engaged and completes process improvement projects related to achieving improved quality or efficiency within their area of responsibility.
2. Actively supports corporate initiative in resource sustainability and business continuity.
3. Promotes, encourages and supports continuous improvement culture.
4. Performs other duties as assigned.

Other Requirements:
1. An Airframe and Powerplant (A&P) license is not required but may be used in combination with four (4) years of related quality experience (in addition to the experience requirements below) to offset the Bachelors degree.
2. ASQ certification (CQE) and/or experience as a FAA recognized airworthiness designee highly preferred.
3. Current/prior authorizations as an FAA IAR/DMIR/ODAR or DAR is preferred.
4. A&P license preferred.
5. Understands and is able to apply and communicate to others: blueprints/specifications, Federal Aviation Regulations, Quality Control System Requirements.
6. Computer literate-capable of working within the various software applications utilized throughout the corporation.
 
Job Number: 7910
Job Location: Savannah, GA
Rate: 50.00
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Engineer II

Description:
Location: Savannah, GA
Rate: $55.00/HR
Duration: Long Term contract

****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
- Catia V5 Exp.

Education and Experience Requirements:
Bachelor’s degree in a related curriculum or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.4 years related technical exp in a manufacturing environment or repair and overhaul working with quality management systems with continually increasing responsibility. 3 years exp specific to the appropriate Quality department work to be performed.

Position Purpose:
Working under general supervision, in a team oriented environment, perform all tasks in area of responsibility in a timely and efficient manner to support the inspection/quality system ensuring all aspects of the delivered/finished article is manufactured in accordance with approved quality system requirements and is certified as compliant to type design requirements or compliant with in service limitations for Repair Station activities.

Principal Duties and Responsibilities:
Essential Functions: 1. Manage the compliance of the quality activities of suppliers or Company facilities through the application of system, product and process audits to the requirements of the FAA approved data. 2. Certify a supplier or assess a Company facility quality system, personnel, processes and equipment as required to the applicable quality standards. 3. Perform surveillance, source inspections, and first article inspections at supplier facilities, foreign or domestic and/or monitor the inspection system performance throughout all Company Operations, Materials and Repair Stations. 4. Coordinate quality assurance program plans, monitor and modify audit schedules, evaluate acceptance test programs, and quality engineering requirements of Company suppliers or facilities and review to ensure program effectiveness and integrity. 5. Witness and validate acceptance, qualification, interchangeability, configuration and compatibility tests. 6. Provide Company liaison support regarding supplier or facility performance to established requirements. 7. Coordinate documentation support for FAA Compliance.

Additional Functions: 1. Conduct product, system or process failure investigations, and provide technical assistance in resolution of quality problems. 2. Verify required corrective action implementation for timeliness and effectiveness. 3. Perform trend analysis of audit results to identify quality system deficiencies. 4. Work with other departments as needed to meet quality compliance of parts and processes. 5. Perform other duties as assigned.

Other Requirements: 1. Previous Quality experience relative/complying with Regulatory Standards. 2. Understands and is able to apply and communicate to others: blueprints/specifications; Federal Aviation Regulations; Quality Control System Requirements; knowledge of manufacturing/fabrication techniques and processes 3. Computer literate; capable of working within the various software applications utilized throughout the corporation. 4. ASQ Certification as Quality Engineer or Quality Auditor preferred. 5. A&P license preferred.
 
Job Number: 8499
Job Location: Savannah, GA
Rate: $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Radar Systems Engineer

Description:
ACTIVE SECRET CLEARANCE REQUIRED

Systems Engineers for Requirements Development, Data Analysis, SW/Systems Integration and Software Trouble 
Investigations.
The Systems Engineer will be involved with the following activities: 
Create, develop and maintain Requirements 
Support design and implement new tactical capabilities 
Update/maintain/utilize various simulation tools to support data analysis 
Support periodic customer briefings; creating technical presentations and reports necessary to support contract specified requirements. 
Basic Qualifications/Skills: 
4-8 years of Science or Engineering work related experience 
- B.S. Electrical Engineering; Computer Science; Math – Applied, Mechanical Engineering, Physics, or equivalent 
- Understanding of System Engineering Product Development Cycle 
- Understanding of Software Engineering Product Development Cycle 
- Demonstrated experience with Sensor integration and Tracking 
- Strong analytical, communication, and writing skills 
Desired Qualifications/Skills:
- M.S. Electrical Engineering; Computer Science; Math
– Applied, Mechanical Engineering, Physics or equivalent
- Self starter with the ability to independently pursue information and solve problems
- Knowledge of surface and air radar architecture
- Naval Combat System Experience &/or CEC
- Experience with modeling and simulation of embedded software.
- Experience with MATLAB/Simulink, and modeling/simulation tools.
 
Job Number: FL40340
Job Location: St Petesburg, FL
Rate: 75.00
Per Diem: Possible
Overtime: Possible
Duration: 6 months
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Bill Carriveau
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Safety Engineer/Sr. Safety Engineer WA

Description:
Job Title: Safety Engineer/Sr. Safety Engineer

Number of Positions: 1

Remaining Positions: 1

Duties:


Performs safety engineering assignments requiring a wide application of advanced principles, theories, and concepts in the field plus a working knowledge of other related disciplines. This position will have a prominent role within the Environmental Health and Safety Team and will work closely with the Operations and Facilities departments.

Essential Job Functions:

25% - Develops safety procedures to protect employee health and safety and that comply with applicable safety standards for a wide variety of processes and situations



25% - Uses a variety of computer software to manage safety data, analyze trends, and generate compliance reports



20% - Identifies, evaluates, and recommends corrective action on unusual safety hazards requiring special safety considerations



15% - Provides Ergonomic evaluations and recommendations for employees in both manufacturing and office environments



10% - Conduct safety training to small or large groups from prepared safety training packages



5% - Reviews new legislation or regulations affecting the safe operation of equipment, facilities, etc. and determines safety implications



Physical Requirements and Work Environment:

This position will typically work under office conditions where the noise level in the work environment is low. However, moderate travel within manufacturing and testing areas is required. The individual may occasionally be exposed to outside conditions, moving mechanical parts, tight or precarious places, vibrations, chemicals, hazardous materials and noise. The use of Personal Protective Equipment and the ability to lift up to thirty-five pounds is required.

Skills:
Ability to set goals and prioritize work activities with minimal supervision. Continuously demonstrate high commitment to safety through personal actions.

Safety Professional Certification is highly desirable.


Education:
BS degree in Safety or Engineering (Chemical, Mechanical, or Electrical Engineering preferred) and 5 years of directly related experience, or an equivalent combination of education and experience. *Requires U.S. Citizenship*

Certifications & Licenses:
Safety Professional Certification is highly desirable.

Skills:
Required
ENGINEERENVIRONMENTAL HEALTHERGONOMICHAZARDOUS MATERIALSOPERATIONS
Additional
SAFETY PROCEDURESSAFETY STANDARDSTESTINGCORRECTIVE ACTIONELECTRICAL ENGINEERINGERGONOMICSLOCKOUT/TAGOUTMACHINE SAFETYRELIABILITY/SAFETYSAFETY ENGINEERINGSAFETY TRAININGTRAINING

State/Province: Washington
City/Town: Redmond

Start Date: 01/08/2018 Hours Per Week: 40.00
Est. End Date: 12/21/2018 Hours Per Day: 9.00
Days Per Week: 5.00
 
Job Number: MB-7633766
Job Location: Redmond, WA
Rate: 50/hr max
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Advanced Systems Engineer-TS/SCI Security Clearance

Description:
We are seeking for an Senior Advanced Systems Engineer for a well known company in Scottsdale, AZ. The position provides an opportunity to develop the cutting-edge technology that supports some of our nation's fundamental defense services.

RESPONSIBILITIES:
Senior Advanced Systems Engineer's analyze, design, develop and test systems to ensure the integration of software, hardware, reliability, maintainability, safety and other requirements in the total engineering effort.
formulating operational concepts; performing mission, functional, cost-benefit and risk analysis; selecting systems architecture; and preparing specifications for operating systems to ensure designs meet applicable security specifications.
Document security on both new and fielded information systems or provide accreditation/certification evaluation and test support to ensure all technical security features are considered and functioning properly.
Exercise creative thinking and ideation to advance our business performance
Deliver innovative, flexible, integrated solutions to meet customers changing business needs
Support and engage in programs, projects and practices behind the culture and strategy, and comply with all policies and procedures
Follow industry and department trends and developments to ensure services are consistent with, and/or superior to, industry best practices
PREFERRED DEGREE TYPES AND EXPERIENCE:
Electrical Engineering, Systems Engineering, Computer Engineering
Experience in SIGINT and Space Payloads.
TS/SCI security clearance
 
Job Location: Scottsdale, AZ
Overtime: Yes
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior CAD / BIM Modeler

Description:
Location: Cape Canaveral, FL
Rate: DOE
Duration: 1 year contract position
Overtime: Exempt

**MUST be a U.S. Citizen**

Job Description / Responsibilities:
Support the development of launch facility 3D models, using existing 2D drawings, laser scans and field walk downs. Models are moderately-complex and represent civil / architectural / structural / mechanical systems for new and existing facility related systems in support of COMPANY’s Vulcan, Atlas V and Delta IV programs, as part of the Launch Operations Engineering and Infrastructure Team at Cape Canaveral Air Force Station Florida. Work also includes detailing and materializing conceptual design ideas into BIM models, designs, engineering and documentation.

Expert experience with AutoCAD, Inventor, Revit, and Tekla Structures is required. Candidates may need to demonstrate proficiency during interview process.
CAD / BIM Support Tasks:
- Create new project models from variety of heritage input.
- Work as part of a CAD/BIM support team to help establish and achieve consistent results.
- Daily model management, administration and maintenance.
- Provide Revit, Inventor, and Tekla Structures support to other project staff.
- Creation of Revit families, type catalogs and Tekla custom components.
- Help develop and support process to link together multiple models from various software programs.
- Collaborate and coordinate with other disciplines’ design-changes and model challenges.
- Follow BIM content standards and development procedures.
- Produce construction documents for one or more disciplines
- Assist in developing project templates and standards, and ensuring team adherence to them.

Job Requirements:
Architectural, Structural or Mechanical Degree plus 4+ years of experience in a professional environment. 6 years of relevant experience may be substituted for a degree.

A minimum of 4 years of professional use and support of:
- Autodesk Revit (Architecture, Structure, & MEP)
- Autodesk Inventor (or similar mechanical modeling software, e.g. Solidworks, NX, etc.)
- Tekla Structures
- Working knowledge of design industry workflows, production cycle and priorities.
- Ability to uphold the use of standards and escalate issues in a timely fashion.
- Eager to support staff with positive attitude, passion and patience.

Preferred Qualifications:
- An understanding of design and fabrication of industrial facilities, structures, and personnel access support equipment and facility platform systems a plus.
- Understanding of and experience with interoperability between multiple CAD environments.
 
Job Number: 8438
Job Location: Cape Canaveral, FL
Rate: DOE
Per Diem: Split Possible
Overtime: Exempt
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Program Manager

Description:
SUMMARY
Directs, coordinates and oversees all activities related to execution of a contract. Provides a single point of contact for all program related inquiries. Facilitates interdepartmental cohesiveness between engineering, certification and supply chain and coordinates the activities of other companies, vendors or individuals by performing the following duties.

ESSENTIAL DUTIES AND RESPONSIBILITIES
• Provides high-value customer with a direct point of contact for contracts which are prototype in nature, technical and/or of moderate to high value.
• Responsible for comprehending the Statement of Work and contract for assigned projects and ensuring that both GTI and the customer comply with both.
• Responsible for communicating concise and comprehensive program statuses and priorities to the program team.
• Trains and mentors less experienced Program Managers and Associate Program Managers by reviewing and promoting best practices, helping to develop required skills and sharing experiences at the Senior level.
• Organizes and facilitates contractual coordination and milestone meetings.
• Ensures that assigned medium- to large-scale projects progress on schedule, within budget and meet or exceed minimum quality standards.
• Participates in, and guides, Change Order processes and activities for assigned projects.
• Keeps the customer and executive management informed of the current status of all significant aspects of each assigned project through program reviews, status reports, meetings, etc.
• Facilitates inter- and intra-department coordination to support project requirements.
• Provides strong planning and leadership which will minimize problems or conflicts, and provides leadership in developing team based solutions to problems as they arise.
• Coordinates with internal departments to ensure that the activities of other companies, vendors or individuals support project requirements.
• Oversees Modification Center activity and schedules.
• Negotiates assigned items including revised delivery dates, costs or other proposal/contract parameters.
• Facilitates a positive relationship with customers.
• Maintains regular attendance including being at work, being on time to work and working full shifts.
• Other duties as assigned.

COMPETENCIES
To perform the job successfully, an individual should demonstrate the following competencies:

CORE COMPETENCIES
• Adaptability - Adapts to changes in the work environment, manages competing demands, and accepts constructive criticism/feedback and changes approach or method to best fit the situation.
• Communications - Expresses ideas and thoughts effectively in verbal and written form, exhibits good listening and comprehension, keeps others informed and uses appropriate communication methods.
• Dependability - Responds to requests for service and assistance, follows instruction and responds to management direction, takes responsibility for own actions and doing the best job possible, keeps commitments, and maintains reliable attendance.
• Initiative - Sets and achieves challenging goals, demonstrates persistence and overcomes obstacles, measures self against standard of excellence, recognizes and acts on opportunities, and takes calculated risks to accomplish goals.
• Teamwork - Balances team and individual responsibilities, exhibits objectivity and openness to others' views, gives and welcomes feedback, contributes to building a positive team spirit, and puts success of team above own interests.
• Work Quality - Demonstrates accuracy and thoroughness, displays commitment to excellence, looks for ways to improve and promote quality, applies feedback to improve performance, and monitors own work to ensure quality.

JOB CORE COMPETENCIES
• Impact & Influence – You pursue and win support for ideas, you display ability to influence key decision-makers, you achieve win-win outcomes, you use authority appropriately to accomplish goals, and you address divergent opinions.
• Organizational Savvy – You display an understanding of organizational culture and practices, incorporate organizational awareness into decision making, and utilize both formal and informal channels to achieve results; you navigate organizational politics effectively and build alliances across the organization.
• Problem Solving - Identifies problems in a timely manner, gathers and analyzes information skillfully, develops alternative solutions, resolves problems in early stages, and works well in group problem solving situations.
• Team Leadership – Fosters team cooperation, defines team roles and responsibilities, supports group problem solving, ensures progress toward goals, acknowledges team accomplishments.

SUMMARY OF EDUCATION, EXPERIENCE & CERTIFICATION
Bachelor's degree (B. S.) in Engineering or a related discipline from four-year college or university and a minimum of ten years related experience and/or training. PMP certification required. Aerospace background and aircraft interior industry experience required.

Employees working on programs subject to International Traffic in Arms Regulations must qualify as a US Person which is defined as a US Citizen, a Permanent Resident who does not work for a foreign company/foreign government/foreign governmental agency or organization, or a political asylee for legal compliance purposes.

REQUIRED KNOWLEDGE, SKILLS & ABILITIES
• Ability to work well independently and cross-functionally as part of an established and growing team.
• Proven ability to use situational leadership to get desired results.
• Strong communication, time-management and problem-solving skills.
• Ability to influence, persuade and negotiate.
• Ability to inspire and motivate individuals across an organization.
• Must possess broad technical and certification knowledge.
• Utilizes a holistic problem-solving approach to situations.
• Ability to read, analyze and interpret the most complex documents.
• Ability to respond effectively to the most sensitive inquiries or complaints.
• Ability to make effective and persuasive speeches and presentations on controversial or complex topics to top management or project teams.
• Ability to apply principles of logical or scientific thinking to a wide range of intellectual and practical problems.
• Ability to deal with nonverbal symbolism (formulas, scientific equations, graphs, etc.,) in its most difficult phases.
• Ability to deal with a variety of abstract and concrete variables.
• Demonstrated experience with Accounting, Database and Project Management software.
• Proficient in Microsoft Office applications.
• Ability to sit for extended periods of time, use hands to lift and/or move up to 10 pounds, occasionally lift and/or move up to 25 pounds and have close/color vision ability to adjust focus.
• Ability to travel as required.
• Ability to work outside of core business hours as required.
 
Job Number: 18-812
Job Location: Northwest
Rate: OPEN
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Software Architect-TS/SCI Security Clearance

Description:
We are seeking for an Sr Software Architect to support business development activities through analysis of customer and market requirements and comparison against product lines along with other vendor products/capabilities. Recommend the development of new capabilities in support of market and customer needs.

Responsibilities:
Perform software requirements analysis, system integration activities, lead research, designs, develop and tests software and tools, to include development of new work products or enhancing existing applications, systems or embedded products.
Support SIGINT program pursuits and execution.
Assessment of the system level functional and performance requirements and the definition of software system implementation strategies
Working closely with the RF/DSP engineering and capture teams to perform trade studies pertaining to the development of the control, status, varied analytic application infrastructure and execution, along with operator visualization functionality.
The software functionality will entail architectures and concepts that facilitate the real-time operation of the system as well as the open architectural model that allows for the seamless integration of third party/COTS applications.
Development of buildup, integration and system level test approaches and plans.
Evaluate Customer requirements as they apply to the system level capabilities to include preparation and delivery of customer briefings and capability demonstrations.
Agile experience preferred. Experience in embedded real-time software applications associated with communications is ideal.

KNOWLEDGE SKILLS AND ABILITIES:
Large-Scale Software Architectures – Open Systems Architecture
Service Oriented Architecture
Agile Development Methodologies
C/C++ code development, integration and test
JAVA code development, integration and test
System and Subsystem integration and test
TS/SCI security clearance is required

Qualifications:
Bachelor's degree in software engineering or a related technical field is required (or equivalent experience), plus a minimum of 10 years of relevant experience; or Master's degree plus a minimum of 8 years of relevant experience. Agile experience preferred.
TS/SCI security clearance is required
 
Job Location: San Jose, CA
Overtime: Yes
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Systems Engineer (Fulltime)

Description:
Senior Systems Engineer

Location: North Liberty, IA
Duration: Fulltime

Description:
Key Requirements:
- Bachelor's degree with a field of study in Engineering.
- 8+ years of engineering experience.
- 3+ years of demonstrated technical leadership capability on embedded software/hardware integration projects
- Experience with requirements and agile project management tools required
- Experience in vehicle electrical systems, GPS-based guidance systems, telematics and/or in-field communications systems, including ISO11783-based CAN networks, Ethernet, Wi-Fi , etc. is a plus

Summary:
This position is responsible for coordinating and leading the integration, software and electronic hardware requirements capture, and requirements-based testing of precision farming row crop planter control systems.

Responsibilities:
- Collaborate with a cross-functional team to identify and capture stakeholder and system requirements that are essential for defining and managing the behavior, scope, context, and complexity of the system
- Leads and reports on the development of system and sub-system test plans and validation plans
- Coordinate engineering direction concerning the integration of electronic sub-systems
- Analyze field data and customer feedback to understand and quantify performance/quality gaps and drive them to closure
- Create technical specifications and integration documentation for electronic control systems
- Coordinate resolution of system design and integration issues during development
- Position may occasionally require remote field support
- Evaluate the effectiveness of the design and manage changes if necessary

If interested then please send updated resume at ravi@iconma.com
 
Job Number: 17-17637
Job Location: North Liberty,, IA
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Simulation & Software Engineer

Description:
Simulation & Software Engineer
Savannah, GA
Long Term Contract
$58.00-63.00/Hr

Unique Skills:
1. Matlab/Simulink experience modeling real time aircraft systems
2. Aerospace background with avionics lab testing experience
3. Ability to understand aircraft electrical wiring diagrams as it relates to HIL simulation
4. Experience with high level programming or scripting language such as C/C++, Python
5. Knowledge of data protocols used in aerospace
6. Experience modeling aircraft systems in real time on industry standard simulation platforms (eg NI, Speedgoat, Dspace,ADI)
7. Flight and/or aircraft system lab HIL simulation experience
8. Ability to work independently and self-govern priorities in accordance with lab customer needs

Job Description
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7079
Job Location: Savannah, GA
Rate: 58.00-63.00/Hr
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Software Developer

Description:
OOP, C++, Linux, scripting language, secret clearance
 
Job Location: Denver, CO
Input Date: 11/23/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Michael Geil
Address: 1600 AIRPORT FWY STE 400
City, State: BEDFORD, TX 76022-6871
Phone: 817/545-4009
Fax Phone: 817/545-2006
Email: mgeil@jsginc.com
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Developer CA

Description:
Job ID# 15697BR
Title TEMP Software Developer
Job Summary General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems.

We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

DUTIES AND RESPONSIBILITIES:•Determine user requirements and specifications and plan for software development within the broader organizational scope. Software development includes end-user, system level, and data management applications,
•Formulate detailed plans for the implementation of software solutions. In addition to program design this includes determining language, platform, and resource requirements.
•Implementation of design including coding, testing, and documentation.
•Deployment of applications across the enterprise including cross- platform compliance and insuring availability of necessary resources.
•Code maintenance including debugging and updating to keep pace with the evolving environment.
•Assist in planning for future applications based on new developments in computer technology.
•Communicate with the software developer group, with users, and with management as well as with the wider community through the publishing and presentation of technical papers.
•Maintain the strict confidentiality of sensitive information.
•Perform other duties as assigned.
•Responsible for observing all laws, regulations and other applicable obligations wherever and whenever business is conducted on behalf of the Company.
•Expected to work in a safe manner in accordance with established operating procedures and practices.




Additional Qualifications


Proficient in C, C++, Linux, Linux Kernel
H.264, NTSC, KLV, MPEG2, FFMPEG
Technologist with a video background




Qualifications Essential Qualifications Typically requires a bachelors degree, masters degree or PhD in computer science, information systems or a related discipline and progressive software development experience as follows; four or more years of experience with a bachelors degree or two or more years of experience with a masters degree. May substitute equivalent experience in lieu of education. Must have a complete understanding of software development concepts, principles, and theory and demonstrate complete understanding and application of programming and analysis concepts. Must possess the ability to understand new concepts quickly and apply them accurately throughout an evolving environment. Ability to organize, schedule, and coordinate work phases and, determine the appropriate approach at the task level or, with assistance, at the project level and to provide solutions to a range of complex problems. Must have strong communication, computer, documentation, presentation, and interpersonal skills, ability to work independently and as part of a team; and, lead a team of less experienced professional employees on semi-routine tasks. Able to work extended hours as required.

City San Diego
State California
Travel Percentage Required 0% - 25%
Clearance Required? Desired
Work Schedule Rule 9/80
Temp Assignment Duration (# of Days) 365
 
Job Number: JE-15697
Job Location: San Diego, CA
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Prefer Secret Clearance

National Instruments - Lab Windows/CVI Experience testing RF and digital hardware at the board, box and system level Experience with network analyzers, logic analyzers, spectrum analyzers, PXI chassis, signal generators

C Programming Skills
• Strong analytical and trouble shooting skills are required.
• Must have work experience in the design, code and integration of test equipment software used to test Digital and RF/analog advanced state-of-the-art receivers, transmitters, antennas and EW systems.
• Must have work experience in performing analysis of test equipment and software to debug and integrate test equipment software.
• Demonstrated work experience in the following SW languages, National Instruments TestStand and National Instruments Labwindows/CVI and ANSI C/C++
 
Job Number: 41550
Job Location: NY
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Prefer Secret Clearance

Software documentation experience Software verification experience

hardware/software integration
LabView
MIL-STD-1553 Communications
embedded software
C/C++ programming
 
Job Number: 1628
Job Location: PA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
US DOD Secret Clearance Required

C/C++, ADA, Real Time Software Development, vxWorks, Missile and/or Launcher experience

Software configuration management tool experience, Razor
Modeling and Simulation Framework (MSF)
Distributed Interactive Simulation (DIS)
High Level Architecture (HLA)
Matlab
Linux
VxWorks
 
Job Number: 1575
Job Location: TX
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Participating in the full software lifecycle development (requirements analysis, design, implementation and unit testing, software integration and test, system level integration)
• Performing requirements analysis / definition to ensure system will meet all customer requirements.
• Integrating system parameters and software solutions into the real-time system and ensure the functionality of the requirement.
• Participating in code and other software artifacts reviews.
• Interacting with engineers from other disciplines, such as Systems and Electrical Engineering, to obtain pertinent information required to accomplish tasks.
Required Skills:
• Experience with C/C++ and Ada
• Experience using a Real-Time Operating Systems (RTOS), e.g., VxWorks, Linux, Green Hills (GH) Integrity or other.
• Familiarity with Agile lifecycle process including Scrum, Continuous Integration, and Test Driven Development Methodologies
• Applicants must have the ability to manage their own workload and have decision analysis skills.
• Must be able to manage multiple unrelated tasks in an organized manner.
• Ability to work occasional overtime to support critical program events.
• Must be able to communicate effectively in both written and oral form, and must be able to team well with others. 
• A current Secret clearance or the ability to obtain a Secret clearance is required.
Desired Skills
• Working knowledge of UNIX, Linux, Windows, VxWorks or other Real time operating systems
• Working with Open CL, Open GL, and CUDA on GPU platforms  
• Working experience with Power PC or similar processor, hardware interfaces, and space/airborne sensor systems. 
• Experience with design, code, integration, and test of large systems.
 
Job Number: 7144
Job Location: Plano, TX
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: 8 months+
Start Date: 2/19/018
Input Date: 11/14/2020
Firm Name: UNIVERSAL STAFFING SERVICES
Attention: Nancy Boyce
Address: 628 HEBRON AVE STE 214
City, State: GLASTONBURY, CT 06033
Phone: 860/527-8135
Website: www.ussjobs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
No clearance

J2EE, Relational Database Management (SyBase, SQLServer, DB2, or Oracle)TeamCenter Enterprise, JAVA, XML

development team working on the Logistics Data Manager (LDM) system utilizing TeamCenter Enterprise COTS. The position may participate in, or be involved in, the following activities including but not limited to: gather and analyze requirements for LDM tasks; design and develop LDM customization software; perform unit and integration testing; support production deployment; create required create required documentation; and perform other related activities as directed.
 
Job Number: 41530
Job Location: TX
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Secret clearance
3+ years of real-time embedded SW design experience
Demonstrated experience with UNIX/Linux, Windows, Windows API and cross-platform development
Experience with sockets (UDP, TCP), 1553 and serial communications
Solid understanding of multi-threading/multi-processing
Strong development experience in C or C++
Proficient with Microsoft Office, including MS PowerPoint, MS Word and MS Excel
Experience in requirements development
Capable of integrating hardware and software and developing test plans and procedures
Experience with modern software development processes, including software configuration management tools, defect tracking tools and peer reviews
 
Job Number: 41519
Job Location: FL
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
The Software Engineering Center is seeking a Built in Test Engineer to work on next gen Tactical Airborne Sensor System. Built In Test (BIT) Engineer

Job Description:
Applicant needs to have experience with Real Time Embedded Systems in regards to Built-In-Test (BIT). The BIT suite of applications will need to provide confidence for correct operation of each module in various subsystems.
Required Skills:

- Startup-Up BIT (SBIT): Comprehensive testing of hardware and functionality during system startup. Needs to identify subsystem and module in the case of failure.
- Initiated BIT (IBIT): Manual BIT (intrusive). Halts current application and runs comprehensive tests and failure identification on system/module.
- Periodic BIT (PBIT): Non-intrusive tests that can be run while other applications are active.

Desired Skills:
- Device Driver
- Board Support Package
- Ability to use a logic analyzer and/or oscilloscope
- Knowledge of EO/IR and RADAR systems

Required Education:
- B.S. Engineering Degree in either Computer Science or Electrical Engineering
 
Job Number: 40758
Job Location: Los Angeles, CA
Duration: C-P
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Rick Nussbaum
Address: 1857 WELLS RD STE 216
City, State: ORANGE PARK, FL 32073
Phone: 904/562-3214
800 Phone: 866/277-3343
Fax Phone: 904/713-2000
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Contract-Hire

An opportunity exists within the Command & Control, Radar and Mobile Sensors Software department in Tewksbury, MA for a Software Developer/Software Integrator role. The Command & Control, Radar and Mobile Sensors Software department contributes to the success by providing NoDoubt software solutions throughout the product lifecycles of some of IDS most rapidly transportable world class radar, missile, command & control, and homeland defense systems. The department is a critical source of support for a variety of new technology initiatives and internal research and development (R&D) efforts.

Some of the programs supported by the departments include
- Qatar ADOC, Zumwalt, DBR, NASAMS, NATO ACCS, and multiple IRAD. Candidate will be an integral part of the Software team as a development, integration and test engineer. The candidate will be responsible for maintaining, debugging and fixing problems with the SW application, as well as supporting integration efforts. The SW application is built on a Rationale ClearCase environment, specifically using a Linux/UNIX (Redhat, HPUX and IBM) platform, utilizing mainly C++/JAVA programming languages.
The candidate shall also be able to provide technical solutions to a wide range of difficult problems, with solutions that are imaginative, thorough, and practicable, and consistent with organization objectives, work under only general direction and independently determine and develop approach to solutions.

Job Responsibilities:
* Integration of software from multiple SW IPTs
* Work on all phases Software development lifecycle, tools, and methodologies
* Converting software requirements and specifications into logical design artifacts, development of software code, unit testing of code, and analysis of software defects
* Support generation of documentation to include: software development folders, design presentations, and problem reports
* Determine failure root cause, develop, design and implement solutions
* Analyze system performance vs. technical requirements, research and make SW/Systems improvement recommendations
* Able to travel periodically to support integration sites

Required Skills:
* 4+ years of overall experience in a SW Development or SW Integration role
* 4+ years Linux, UNIX or Windows experience
* Broad real-time software development experience
* Experience developing software in a team based development environment, preferably using Agile/Scrum (Scrum, automated testing and continuous integration. Scrum Master and Product Owner experience preferable)
* Strong Object Oriented Design Knowledge including UML
* Familiarity with the following SW Tools: Rational Tool Concert (RTC), ClearCase, DOORS, MATLAB, Jenkins, Google Test
* Excellent verbal and written communication skills

Required Education (including Major):
* B.S. degree in Computer Science, Computer Engineering, Electrical Engineering, Mathematics, or Software Engineering

Active Clearance required, but can start with interim
 
Job Number: 40661
Job Location: Tewksbury, MA
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Gina Smith
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Notes from the Hiring Manager:

* Position is for direct hire / perm placement but you'll be working onsite at a client in Gaithersburg, MD
* Needs an active TS/SCI Clearance; may consider inactive TS/SCI Clearance if able to be transferred to active
* Will act as the Subject Matter Expert (SME) & must have outgoing personality & excellent communication skills
* Geographic Scope (GS) Spatial Scientist or Geography/Geographic background preferred

Summary

Seeking a talented and creative Senior Enterprise Web Services Developer to join software team and help design, develop, test and deploy our web-based geospatial software product line. This position will be based out of Gaithersburg, MD, but will also require customer site visits and regular visits to the main office in Sterling, VA. Candidates must possess strong verbal and written communication skills as they will need to participate on the program’s SCRUM teams. Daily responsibilities will include gathering requirements for web-based imagery exploitation tools, enhancing our current imagery exploitation to meet new requirements, integrating solutions into the program’s enterprise architecture, and assisting with deployment to the customer site.

Specific Duties:
> Requirements analysis, design, and development of web services and application software
> Integrating web-based applications and services into larger geospatial exploitation enterprise systems
> Help capture and evolve future requirements and develop best practices for web developers
> Working with onsite development teams to define clean client-server interfaces and quality assurance teams to define testing strategies
> Interacting with government and prime contractor personnel throughout the program lifecycle

Qualifications:
> Applicants must demonstrate proficiency at understanding geospatial software products at a technical level and how these products interoperate with other technologies.
> Applicants must be accomplished web developers experienced in the entire software development lifecycle.
> Successful candidates will have the ability to prioritize and to complete multiple concurrent tasks in a fast-paced, deadline-driven environment.
> Experience with Web Services/SOA/SaaS architectures
> Experience implementing RIA applications using REST/JSON
> Knowledge of modern web technologies: HTML5, CSS3, JavaScript, browser compatibilities, mobile, etc.
> Experience with elastic cloud architectures (AWS, Azure, etc.)
> Experience with AGILE development methodologies
> Educational background or work experience in either imaging or geospatial sciences is a strong plus
> Ability to communicate complex technical concepts to a diverse audience, including upper management and customers
> Ability to work cooperatively in multi-discipline teams is essential

Requirements:
> Bachelor’s degree in Computer Science, Information Systems, Remote Sensing, GIS or a related field.
> 3 - 5+ years of relevant software development experience in a team environment
> An active TS/SCI security clearance (see notes above also)

Mark A Ludwig
Vice President
Global American Staffing
Email: mludwig@globalams.us
Direct: (508) 434 – 6180
Office: (508) 230 – 5030 x123
 
Job Number: 035_2017
Job Location: Gaithersburg, MD
Rate: Open
Per Diem: No
Overtime: Yes
Duration: Direct / Perm Hire
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark A Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer - Level 3 with active secret FL

Description:
Requirement#MFC-REQ-1437
Work LocationOrlando, FL
Work Week9/80-A

Needed Date07/31/2017
End Date07/30/2018
Number of Resources5
Security ClearanceSecret

TitleSoftware Engineer - Level 3
Description
Design and implement JASSM Mission Planning software components in the Joint Mission Planning System (JMPS) environment. Duties include requirements analysis, designing/developing Visual C++ and C# software components, and development of software component test cases, procedures, drivers, and integration of developed components with subcontractor developed components
Skill/Experience/Education
Mandatory:

• Visual C++, C# development experience • Experience with software debugging in MS Visual Studio environment
Desired:

• Mission planning software development experience



Interview RequiredNo


OT AllowedNo
TravelNo
Non-Exempt
Rate TypePer Hour
 
Job Number: JE-1437
Job Location: Orlando, FL
Rate: 70-80/hr DOE
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer II

Description:
UNIQUE SKILLS
Become a key member of the software team responsible for the client Cabin Management System and related components within the cabin of advanced client aircraft. Principal Duties/Responsibilities: 1) Designs, develops, tests, and integrates software modules of varying scope and complexity to meet program objectives 2) Works within a team environment, promoting cohesiveness and continuous improvement 3) Maintains and troubleshoots multiple software projects designed for various platforms, with primary focus on Java platforms & products 4) Interfaces with other groups and customers as needed during design/development and troubleshooting 5) Maintains a current knowledge of developments, both process and technical, related to software development in order to recommend innovations to improve quality and effectiveness, as well as to offer creative and informed opinions in the course of troubleshooting and debugging. 6) Participates as needed in any or all of the software design phases, including requirements generation, software design, code implementation, validation, and documentation of the results Required Skills: * Self-motivated and able to work under limited supervision when required * Proficiency developing/maintaining Java applications * Experience using revision control, git preferred * Ability to follow a software development process, such as Agile * Experience with one or more of the following a plus: UI/UX design/development, Design Patterns, Spring * Network engineering skills are a plus

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 18 months related engineering experience with Bachelor’s degree. Experience credit will be considered for related advance degrees limited to 2 years for Master’s Degree and 4 years for PhD in fields applicable to this job position.

POSITION PURPOSE
Performs engineering work related to the investigation and the solution of technical problems associated with research, design, development, service and manufacture of client aircraft.

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Solves typical engineering problems within assigned discipline 2. Provides technical assistance to engineering staff and contributes to completion of project milestones 3. Responsible for a complex engineering assignment, or a full project of lesser complexity 4. Follows established schedules while developing plans for engineering assignments 5. Obtains appropriate level of supervisor approvals for work accuracy and adequacy 6. Proficiently applies company/organization policies and procedures

ADDITIONAL FUNCTIONS
1. Actively works to improve daily processes, and ensures all work meets customer requirements 2. Maintains a current and up-to-date knowledge of developments and application of technical principles, theories, and concepts in assigned field of expertise 3. Performs other duties as assigned

OTHER REQUIREMENTS
1. The level of technical skills and abilities appropriate for this grade will be established by each discipline 2. Applies knowledge to provide solutions to a variety of technical problems of moderate scope and complexity, using a combination of judgment with defined practices and procedures 3. Failure to achieve results, or erroneous decisions or recommendations, may cause delays in program schedules and/or allocation of additional resources 4. Ability to convey technical concepts in both written and verbal formats 5. Contacts are primarily within the organization, with occasional customer contacts on routine issues 6. Works under general supervision for routine tasks of minor complexity 7. With supervision/mentorship, can coordinate the activities for lower level engineering staff
 
Job Number: 18-814-122421
Job Location: Southeast
Rate: OPEN
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer II

Description:
Software Engineer II

Location: Savannah, GA
Pay Rate: $50/hr - $60/hr
Duration: Long Term W2 contract
Shift: First

Unique Skills:
Become a key member of the software team responsible for the Company Cabin Management System and related components within the cabin of advanced Company aircraft.

Principal Duties/Responsibilities:
1) Designs, develops, tests, and integrates software modules of varying scope and complexity to meet program objectives
2) Works within a team environment, promoting cohesiveness and continuous improvement
3) Maintains and troubleshoots multiple software projects designed for various platforms, with primary focus on Java platforms & products
4) Interfaces with other groups and customers as needed during design/development and troubleshooting
5) Maintains a current knowledge of developments, both process and technical, related to software development in order to recommend innovations to improve quality and effectiveness, as well as to offer creative and informed opinions in the course of troubleshooting and debugging.
6) Participates as needed in any or all of the software design phases, including requirements generation, software design, code implementation, validation, and documentation of the results

Required Skills:
* Self-motivated and able to work under limited supervision when required
* Proficiency developing/maintaining Java applications required
* Experience using revision control required, git preferred
* Ability to follow a software development process, such as Agile
* Experience with one or more of the following a plus: UI/UX design/development, Design Patterns, Spring
* Network engineering skills are a plus

Education and Experience Requirements:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 18 months related engineering experience with Bachelors degree. Experience credit will be considered for related advance degrees limited to 2 years for Masters Degree and 4 years for PhD in fields applicable to this job position.

Position Purpose:
Performs engineering work related to the investigation and the solution of technical problems associated with research, design, development, service and manufacture of Company aircraft.

Additional Principal Duties and Responsibilities/Essential Functions:
1. Solves typical engineering problems within assigned discipline
2. Provides technical assistance to engineering staff and contributes to completion of project milestones 3. Responsible for a complex engineering assignment, or a full project of lesser complexity
4. Follows established schedules while developing plans for engineering assignments
5. Obtains appropriate level of supervisor approvals for work accuracy and adequacy
6. Proficiently applies company/organization policies and procedures

Additional Functions:
1. Actively works to improve daily processes, and ensures all work meets customer requirements
2. Maintains a current and up-to-date knowledge of developments and application of technical principles, theories, and concepts in assigned field of expertise
3. Performs other duties as assigned

Other Requirements:
1. The level of technical skills and abilities appropriate for this grade will be established by each discipline
2. Applies knowledge to provide solutions to a variety of technical problems of moderate scope and complexity, using a combination of judgment with defined practices and procedures
3. Failure to achieve results, or erroneous decisions or recommendations, may cause delays in program schedules and/or allocation of additional resources
4. Ability to convey technical concepts in both written and verbal formats
5. Contacts are primarily within the organization, with occasional customer contacts on routine issues
6. Works under general supervision for routine tasks of minor complexity
7. With supervision/mentorship, can coordinate the activities for lower level engineering staff
 
Job Number: 8598
Job Location: Savannah, GA
Rate: 50-60
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer with active secret / Matlab Simulink CA

Description:
160101
Requirement #AERO-REQ-0625
Work Location Palmdale, CA
Work WeeK 9/80-A
Priority High
Needed Date 08/29/2017
End Date 05/29/2018
Number of Resources 1
Security Clearance Secret (Prime Contract:, Can start w/o clearance:No, Interim Clearance Sufficient:No)


Title: Software Engineer

Description
Develop, analyze, integrate, and test flight control laws and embedded software for the Advanced Development Programs (ADP, Skunk Works) Flight Control and Vehicle Management Systems Integration team. Contribute to software requirements, design, code, reviews, and test of operational flight programs. Good oral and written communication skills required as is the ability to flex and adapt in a fast-paced team environment. Selected applicant will be subjected to government security investigation and must meet eligibility requirements for access to classified information and special program clearances
Candidate must possess an active SECRET clearance.

Skill/Experience/Education
Mandatory:

Candidate must have Flight Control system experience and Experience with MATLAB, OR Simulink
Candidate must possess an active SECRET clearance.
Desired:

Bachelor's Degree in Electrical, Mechanical or Aerospace Engineering


Interview Required Yes
OT Allowed Yes (OT Limitation: No)
Travel No
Non-Exempt
Rates
0-4 Yrs Pay Rate: 65.00 USD
5-8 Yrs Pay Rate: 70.00 USD
9+ Yrs Pay Rate: 75.00 USD
 
Job Number: JE-0625
Job Location: Palmdale, CA
Rate: 65-75/hr DOE
Per Diem: no
Duration: 9 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineers - Many Needed C++ - Many Needed

Description:
BS Engineering Degree
C++ - Advanced/Modeling/Simulation/Object Oriented Programming
Develops Software Verification plans, test procedures
*Must be able to obtain a clearance

Email resumes to: mmccarthy@pdstech.com
 
Job Number: Bo-Soft-MO
Job Location: St. Louis, MO
Rate: $75.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 6 Months+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr Software Engineer

Description:
Seeking a Senior SW Engineer with C/C++ development skills needed to support multiple programs.

Role and Responsibilities include the following areas:
• Debug, troubleshoot, issue investigation, find root cause and provide corrective action determination to address integration issues.
• Interface directly with Raytheon management team and customers in meetings and reviews.
• Expand and influence program developments by working closely with the program managers and other engineers to process direction for the program.
• Execute to program requirements. Ensure that cost and schedule commitments are being met to ensure on time delivery of the end product deliverables.
• Provide weekly reporting of key programmatic milestones in accordance with the program plan, while insuring risk mitigation throughout the program.

Required Experience, Knowledge and/or Skills:
• 4 years software development experience
• Experience in performing as a SW Engineer for software development teams
• Ability to design, architect, develop embedded software, and perform system integration utilizing C and C++
• Experience in using Green Hills Integrity
• Experience in using Waterfall and/or Agile Scrum methodology
• Ability to write software test plan and test procedures
• Ability to support engineering team members on various programs
• Ability to multi-task, to support multiple customers, and to work within specific schedule and cost constraints
• Strong organizational skills
• Possess and demonstrate excellent interpersonal, presentation and verbal/written communication skills
• Excellent time management skills
• Ability to access to US only data systems


Desired Experience, Knowledge, and/or Skills:
• Experience with Green Hills Integrity
• Ability to work with Waterfall and Agile/Scrum, Continuous Integration Environments
• Ability to work on different products
• Ability to work with requirements management using DOORS
• Ability to work with configuration management using MKS and Git
• Ability to perform Software or Systems Engineering Integration
• Ability to work with Raytheon’s Development Process
• Ability to work with IMS (Integrated Master Schedule)

Required Education Requirement: B.S. Computer Science, Computer Engineering, Software Engineering, Electrical Engineering or other Engineering discipline

Desired Education Requirement: B.S. in Computer Science, Computer Engineering, or Electrical Engineering
 
Job Number: 8006786
Job Location: El Segundo, CA
Rate: DOE
Duration: 12 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Maurice Bradford
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr Systems Administrator

Description:
Responsibilities:

  • Employ system analysis techniques to create needs assessments, consulting with clients to determine business needs and goals, hardware and software requirements and system specification.

  • Design comprehensive IT solutions to meet those needs and goals.

  • Implement and test client systems as required to meet business and technical specifications.

  • Document client systems to facilitate future training and support activities.

  • Identify and respond to customer questions, issues and service opportunities.

  • Build and maintain long-term relationships with clients to ensure that they continue to effectively use IT as a tool to achieve their business goals.

  • Manage internal and external resources on client engagements to assure best practices are followed.

  • Provide support to client on any aspect of their system following

  • Independently prioritize work and schedules to accomplish client objectives and assure high levels of services and quality of work is maintained.

  • Maintain accurate incident report details and client documentation in established ticketing system.

  • Remain knowledgeable in current network and server technologies to assure the continuing relevance of the Company's products and services.




Requirements:



  • A Bachelor degree in computer/information systems or related field is required.

  • Strong customer service, communication skills and documentation skills.

  • Good understanding of Cloud Services, Virtualization, Server Systems and Networking.

  • Experience troubleshooting hardware and software to include: Windows; Macs, Linux, Audio Visual and Cisco Call Manager VOIP equipment.

  • Experience with enterprise software applications, tools and software development platforms.

  • 4-5 years' experience within the computer networking industry

  • 4-5 years' experience with switches, routers, and firewalls

  • System administration experience with Windows Server 2008 and 2012

  • Strong technical support and troubleshooting skills

  • Experience in configuration, implementation, and support of Cisco routers, Cisco switches, Cisco firewalls, Palo Alto firewalls and other firewall technology

  • Experience in configuration, implementation and support of system backup software, appliances and services such as Dell AppAssure.

  • Experience in Cloud Computing solutions such as iCloud director, Azure, Amazon Cloud services and others.

  • Knowledgeable of current client/server technology. (LAN/WAN, Internet, Messaging, etc.)

  • Knowledgeable of current hardware technologies. (Server, Router, Storage, etc.)

  • Knowledgeable of current virtualization technologies (VMware, XenServer, Microsoft Hyper-V)

  • Knowledge of NAS & SAN solutions

  • Disaster Recovery planning and implementation

  • Experience in network security technologies



 
Job Number: 18-00370
Job Location: San Jose, CA
Rate: 32.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2018-07-23 00:00:00
Start Date: 2018-01-22 00:00:00
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Brian Carrillo
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Safety Engineer

Description:
Safety Engineer/Sr. Safety Engineer

Location: Redmond, WA
Pay Rate: DOE ($45/hr - $50/hr)
Duration: 1 year W2 contract
Shift: not specified
**MUST be a U.S. CITIZEN**

Duties:
Performs safety engineering assignments requiring a wide application of advanced principles, theories, and concepts in the field plus a working knowledge of other related disciplines. This position will have a prominent role within the Environmental Health and Safety Team and will work closely with the Operations and Facilities departments.

Essential Job Functions:
25% - Develops safety procedures to protect employee health and safety and that comply with applicable safety standards for a wide variety of processes and situations
25% - Uses a variety of computer software to manage safety data, analyze trends, and generate compliance reports
20% - Identifies, evaluates, and recommends corrective action on unusual safety hazards requiring special safety considerations
15% - Provides Ergonomic evaluations and recommendations for employees in both manufacturing and office environments
10% - Conduct safety training to small or large groups from prepared safety training packages
5% - Reviews new legislation or regulations affecting the safe operation of equipment, facilities, etc. and determines safety implications

Physical Requirements and Work Environment:
This position will typically work under office conditions where the noise level in the work environment is low. However, moderate travel within manufacturing and testing areas is required. The individual may occasionally be exposed to outside conditions, moving mechanical parts, tight or precarious places, vibrations, chemicals, hazardous materials and noise. The use of Personal Protective Equipment and the ability to lift up to thirty-five pounds is required.

Skills:
-Ability to set goals and prioritize work activities with minimal supervision. Continuously demonstrate high commitment to safety through personal actions.
-Safety Professional Certification is highly desirable.

Education:
BS degree in Safety or Engineering (Chemical, Mechanical, or Electrical Engineering preferred) and 5 years of directly related experience.

Skills Required
ENGINEER ENVIRONMENTAL HEALTH ERGONOMIC HAZARDOUS MATERIALS OPERATIONS
 
Job Number: 8391
Job Location: Redmond, WA
Rate: 45-50
Per Diem: Split Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Software Test Engineer

Description:
Sr. Software Test Engineer

Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term W2 Contract
Shift: First

Unique Skills:
Become a key member of the software team responsible for the Company Cabin Management System and related components within the cabin of advanced Company aircraft.

Principal Duties and Responsibilities:
1) Designs, develops, and maintains system test plans and procedures
2) Provides structured testing and quality assurance for multiple software projects designed for various platforms, including embedded environments, mobile devices, and PCs
3) Logs issues found and delivers organized test reports after test cycles
4) Advances system test bench capabilities by working with the Software Team to identify areas that would benefit most from automation, simulation, etc. and helps coordinate implementation of the changes
5) Maintains a current knowledge of developments, both process and technical, related to software testing / QA in order to recommend innovations to improve quality and effectiveness
6) Interfaces with other groups and suppliers as needed during design/development and troubleshooting
7) Works within a team environment, promoting cohesiveness and continuous improvement

Skills:
* Self-motivated and able to work under limited supervision
* Experience developing and maintaining test plans
* Experience testing/approving software in complex software systems
* Proficiency using defect/task tracking systems, such as JIRA and collaboration tools, such as Confluence
* Proficiency with one or more scripting languages
* Familiarity with a high-level language, such as C++, C#, or Java, to develop PC applications a plus
* Networking experience a plus

Education and Experience Requirements:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principal Duties and Responsibilities/Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 8150
Job Location: Savannah, GA
Rate: 58.00-63.00
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineer

Description:
No Clearance Required

Uses computational methods and tools in a specialized field (strength of metallic and composite structures, finite element analysis, fatigue and damage tolerance, etc.). Performs pre-dimensioning computations by implementing analytical or digital computation methods and pass judgement on the credibility of the data received and the results obtained. Take part in drawing up the measurement plan applicable to the tests, and analyses the results.

required with structural mechanics simulation software, ANSYS OR HYPERMESH, with 6-8 years of related experience. Familiarity and experience with other FEA tools such as NASTRAN, other pre/post processor software such as PATRAN, MIL-HDBK-5. Candidate must have working knowledge/experience with Computer Aided Design software tool. Candidate must be capable of interpreting detail, assembly, and installation type drawings, and knowledge of Geometric Dimensioning and Tolerancing. Familiarity with Microsoft Office applications is desired.
 
Job Number: 41504
Job Location: TX
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineer CA

Description:
16211
Title Stress Engineer
Job Summary General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems.

We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

We have an exciting opportunity for a Stress Engineer in our Airframe Integrity Group at GA-ASI. Under general supervision with limited review, this position is responsible for determining and developing effective approaches for resolving a wide range of difficult engineering problems. Assignments are normally outlined in terms of overall objectives and anticipated results. Work is reviewed at milestones or at completion for adequacy in meeting objectives. Documents findings, communicates results to engineering staff and makes technical presentations as required. May coordinate segments of a specific project and may have frequent inter- organization and customer contact on difficult technical issues. Provides direction to design or technical staff and may provide direction to less experienced professional staff.

DUTIES AND RESPONSIBILITIES:•Supports operation of engineering systems by evaluating and interpreting needs and problems and develops effective approaches to resolving those issues.
•Responsible for performing structural analysis of aircraft components, assemblies, and systems while working as an integrated team for design studies.
•Structural analysis includes calculation of loads, stress analysis, fatigue analysis, and vibration analysis.
•Evaluate structural integrity of aircraft structures by way of classical hand and finite element methods.
•Generate documentation to report analysis and test results to support airworthiness certification.
•A working knowledge of FAA and Mil-Spec airworthiness requirements, along with experience with Matlab, Excel and Visual Basic will be advantageous.

Qualifications Essential Qualifications Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; four or more years of experience with a bachelors degree or two or more years of experience with a masters degree. May substitute equivalent engineering experience in lieu of education. Must have a complete understanding of engineering concepts, principles, codes, and theory; experience demonstrating a broad application of those concepts; and, expanding knowledge of principles, concepts, theory, and practices in related technical specialties. Must possess the ability to understand new concepts quickly; apply them accurately throughout an evolving environment; organize, schedule, and coordinate work phases; and, determine the appropriate approach at the task level or, with assistance, at the project level to provide solutions to a range of complex problems. Must have excellent communication, computer, documentation, presentation, and interpersonal skills, ability to work independently and as part of a team; able to perform complex tasks in one engineering area; and, lead a team of less experienced professional employees on semi-routine tasks. Able to work extended hours as required. A Professional Engineering License is desirable.
Additional Qualifications Essential Qualifications:
• Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; four or more years of experience with a bachelors degree or two or more years of experience with a masters degree. on.
• Must have a complete understanding of engineering concepts, principles, codes, and theory; experience demonstrating a broad application of those concepts; and, expanding knowledge of principles, concepts, theory, and practices in related technical specialties.
• Must be familiar with stress, dynamics, fracture, fatigue and damage tolerance analysis of metal and composite structures.
• Working knowledge with NASTRAN or ABAQUS software is required.
•Must have at least 2 years of working experience using Finite Element analysis tools like Hypermesh, Pro/Mechanica, FEMAP/NASTRAN, and ABAQUS.
• In addition knowledge of aeroelastic analysis and modal testing is desirable. Requires knowledge of composite material behavior, laminate theory, and analysis
• Able to work extended hours as required.
City San Diego
State California
Travel Percentage Required 0% - 25%
Clearance Required? No
Work Schedule Rule 9/80
Temp Assignment Duration (# of Days) 180
 
Job Number: JE-16211
Job Location: San Diego, CA
Rate: 60-65/hr max
Per Diem: no
Duration: 6 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design with active secret / Catia V5 CA

Description:
160829
Requirement#AERO-REQ-0732
Work Location Palmdale, CA (1011 Lockheed Way, Palmdale, CA 93599)
Work Week9/80-A
PriorityHigh
Needed Date01/09/2018
End Date01/09/2019
Number of Resources1
Security ClearanceSecret

TitleStructural Design-N
Description
Design of structural detail parts, assemblies and installations, as well as, systems installations for aircraft. Engineer shall be responsible for development of layouts, preparation of engineering drawings, planning, scheduling, and coordination of activities of assigned subordinate engineers, and support of manufacturing operations and customers in resolving technical problems related to the aircraft structure and systems. Candidate must be able to coordinate efforts with little or no supervision across a wide range of functional organizations, such as Planning, Tooling, Stress, M&P, R&M, Material, Flight Sciences, Test, Manufacturing, and other Design IPTs to ensure that designs meet customer and derived requirements. Candidate must have aerospace design experience with knowledge of configuration management techniques, drafting/drawing conventions, and aerospace specifications and procedures.
Skill/Experience/Education
Mandatory:

Active Secret security clearance.--

This position is located at a facility that requires special access----Proficient with CATIA V5--Understanding of drawing practices, material properties, and manufacturing processes
Desired:

Proficiency with Microsoft Office suite (Word, PowerPoint, Excel, Outlook), Windows Bachelor OR Above Degree in a Engineering Technical Discipline--5 or more years experience in the design of aircraft structures

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
CATIA V5 Proficiency in CAD software CATIA V5 4-5 Years Yes
Aircraft Structural Design Proficient with aircraft structural design of composite and metallic parts 4-5 Years Yes



Interview Required
OT Allowed
Non-Exempt
Rate TypePer Hour
Rates
5-8 YrsPay Rate: 90.00 USD
9+ YrsPay Rate: 95.00 USD
 
Job Number: JE-0732
Job Location: Palmdale, CA
Rate: 90-95/hr max
Per Diem: no
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Supplier Quality Engineer

Description:
Supplier Quality Engineer

Location: Bothell, WA (Seattle area)

Terms: Long Term Contract Employment

This business Unit, manufacturer of Automated External Defibrillators, is looking for a Supplier Quality Engineer to work in a scrum team. A scrum team is a dedicated cross-functional project group with the goal to tackle and solve high priority business / operational issues.

Your Challenge:

Perform Supplier Quality activities in the dedicated scrum team related to purchased part qualification with suppliers, supplier quality issue resolution and ensuring appropriate incoming material inspection strategies. Drive quality activities with suppliers, setting a high standard and fast response expectation to solve issues and control and prevent. Collaborate across functional areas of amongst others R&D, Manufacturing, Procurement and lead with best practices to enable our organization to provide high quality medical products to our customers.

Scrum is not a process or a technique for building products, but is a framework within which you can employ various processes and techniques. In an agile environment, team members collaborate and support each other to meet their Sprint Commitments. The emphasis is on the right attitude, not just aptitude. In fact, by collaborating and sharing tasks, team members can often deepen and broaden their skill sets.

Job Requirements:

Successful candidates for the Supplier Quality Engineer position have high level knowledge of the 21 CFR 820, ISO 13485 and ISO 14971.
Someone with a questioning attitude, able to prioritize and execute tasks in a dynamic environment will excel in this role.
Additional Requirements Include:

Bachelor Degree in Mechanical or Electrical Engineering.
Expert working knowledge of standards and regulations applicable to supplier controls affecting a medical device.
Requires strong working knowledge of quality assurance principles and practices, industry and international safety standards.
Minimum 5-years’ experience in medical device or pharma environment.
Must possess excellent communication (verbal & written) skills.
Must practice analytical problem-solving skills.
Working knowledge of various software packages including Microsoft (Excel, Word, Project, and SharePoint) and SAP applications is desirable.
Knowledge of implementing testing frameworks.
Highly organized with efficient use of time.
Ability to facilitate collaboration with cross-functional groups development in a team environment.
 
Job Number: 378344
Job Location: Bothell, WA
Rate: 46.00
Per Diem: No
Overtime: Possible
Duration: 12 Mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: CDI CORPORATION
Attention: Kris Douglas
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems & Integration Test Engineers - Lexington, KY

Description:
STS AeroStaff Services now offers Systems & Integration Test Engineer jobs in Lexington, Kentucky.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• The I&T Engineer will initially support the rotary mission area, but may occasionally support the fixed wing mission area, as required
• The I&T Engineer will support the engineering team during design, integration, verification, ground and flight test, and customer support phases of the program
• The I&T Engineer will develop and present I&T information for internal and external program reviews
• The I&T Engineer will interface with engineering management, program management, customer I&T points of contact, and other internal organizations to ensure that necessary equipment, facilities, and resources are available to support I&T activities
• I&T tasks include test planning and coordination, development of test plans, development of detailed test and demonstration procedures, demonstration and test execution, daily communication of progress to program leadership, integration issue identification and troubleshooting, demonstration/test result evaluation, and documentation of demonstration/test results

Required:

• BS in Electrical Engineering, Mechanical Engineering, or Aeronautical Engineering
• Must have 4-5 years’ Microsoft Office experience
• Must have 4-5 years’ quality test plan/report experience
• Must have an active or interim clearance
• Proficient in generating I&T work products (Master Test Plan, Demonstration/Test Plans and Procedures, Reports, etc.)
• Experience with planning, coordinating, and executing electronics and mechanical I&T
• Experience in evaluating and documenting I&T results
• Experience with presenting I&T information to internal and external team members
• Familiar with trouble shooting and resolving issues that can arise during I&T activities
• Familiar with Systems Engineering and Design processes
• Ability to travel to perform I&T efforts

Desired:

• Experience with Faro laser or equivalent equipment use for mechanical alignment
• Experience with CAM2 Measure and/or Verisurf software packages
• Experience with data collection systems and Instrumentation
• Experience with RF systems I&T
• Familiarity with rapid response programs
• Experience with the coordination, planning and execution of integration and ground/flight test activities
• Experience in testing US military products and familiarity with military specifications and standards
• Experience in leading and supporting failure analysis and corrective action activities
• Experience in working programs from concept, development, integration, test, and into production

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 41382
Job Location: Lexington, KY
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Administrators - Fayetteville, GA

Description:
STS AeroStaff Services is hiring Systems Administrators in Fayetteville, Georgia.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

The System Administrator position manages, reviews, evaluates, implements and maintains the day-to-day operations of information technology for the business and ensures that the underlying technologies and systems run effectively, while providing users with flexibility in the management, access, retrieval, sharing and configuration of the large amounts of data held by the network.
This person must have the technical capacity to manage the company’s systems, which are largely a windows-based Microsoft environment, and at the same time, possess strong customer service skills. The Systems Admin II serves as a “jack of all trades” when it comes to IT and prioritizes needs in the following order: Security, System availability, Data integrity/back-up, and Desktop support.
The ability to grasp complex technical issues, apply a methodical approach, and speak in laymen’s terms is important; an ability to speak across platforms and to provide quality customer service is key given coordination with external consultants/vendors, on occasional customer interface, and with internal staff who rely on this position for IT support/education. While the position reports to a team leader and helps further the Company’s business security and operational needs, there is a high degree of autonomy. In addition, this person works closely with the CIO/VP IT, other IT team members and IT consultant(s)/vendor(s). This is an intermediate level position.

Job Duties:

Security:
• Network monitoring (spam, virus, software management)
• Business continuity and disaster planning and management
• Security auditing, design, planning and implementation management
• Establish and test disaster recovery policies and procedures; complete back-ups; maintain documentation
• Perform operational maintenance tasks (i.e., patch management, software upgrades, security monitoring, firmware upgrades, UPS monitoring, obsolete files and testing)
• Recommend controls by identifying problems; writing improved procedures
• Develop and assess business continuity plans to ensure critical business functions are available to tenants, suppliers, regulators and other entities that require access

IT Service & Operations Management:
• Work with Company leadership to develop a strategic plan with production, productivity, quality and customer service standards in mind:
• Evaluate, recommend, test and install new technology
• Identify trends; determine system improvements; implement change
• Consult with office personnel to clarify program intent, identify problems, and suggest changes
• Sharepoint
• Manage Company technology partnerships in the areas of: equipment procurement/warranty/support, network security, phones/Internet, wireless service, copier, licensing, security monitoring, back-up and user training
• Streamline office services by organizing office operations and procedures to aid employees in being most efficient/providing customer service
• Evaluate the efficiency of procedures, standards and overall operations
• Improve systems by studying current practices, designing modifications
• Manage user/workstation operational requirements
• Maintain software licenses, password lists and company hardware inventory
• Make recommendations on replacements
• Provide historical reference by defining procedures for retention, protection, retrieval, transfer, and disposal of records
• Prepare technical reports and manuals on the operation of systems
• Document user procedures and processes
• Maintain/update existing software solutions, as necessary

Systems Design and Implementation:
• Serve as project manager on projects relating to the installation of hardware, software and custom programming development solutions
• Define project requirements by identifying project milestones, phases, and elements; forming project team; establishing project budget and overseeing to completion including employee training
• Manage and/or coordinate installation, upgrade, or deployment projects, including providing on-site direction for additional network engineers
• Systems upgrade implementation, planning and management
• Establish systems in conjunction with outside IT vendors by planning and executing the selection, installation, configuration, and testing of PC and server hardware, software, networks, and operating system management systems
• Document the above as a critical piece of the Company’s infrastructure

Help Desk Management:
• Provide desktop, network and server support
• Provide application support, to include:
o Troubleshoot and resolve client network and workstation issues
o Resolve day to day technical problems; coordinate and resolve end user support
o Design and conduct training programs; providing references and support
o Write and maintain user documentation
o Document service and installation actions
• Other duties as assigned and/or required

Qualifications:

• Ideal candidates will have a background as a client engineer and have worked for a small business or broader/multi-faceted role in a larger organization
• To perform this job successfully, an individual must be able to perform each essential duty satisfactorily

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 41390
Job Location: Fayetteville, GA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
Flight Control Systems Engineer
Irvine, CA
12+ month contract

Our client is looking for a Senior Systems Engineer to take on design responsibilities in the development of pilot control systems, throttle control systems, large actuator, and related flight control products for the next generation of business, regional, military and air-transport aircraft.

Engineering duties will span the entire product lifecycle, from initial design and requirements capture through manufacture and system testing. While working in a cross-functional team environment, daily tasks will include:
• Requirements development and management,
• System/Mechanical design, modeling, analysis, and review,
• Budget and schedule management,
• Test/verification planning, development, and execution,
• Customer interface, coordination, and communication, and
• Coordination with manufacturing operations.

Qualifications:
The ideal candidate must have extensive knowledge and experience with detailed electro-mechanical systems such as pilot controls, throttle controls, actuators, or other aerospace mechanical systems. Furthermore, a strong history of leading failure investigations with various suppliers, prepare Failure Condition/Corrective Action Reports (FCARs), and prepare qualification test plans, procedures and reports using commercial aerospace development processes. Qualification test experience will differentiate the most qualified individuals. Proficiency in using DOORS software for Requirements capture and management is a plus.

Experience with Matlab/Simulink and NX Cad Software and their application to mechanics and system modeling is highly desired.

Knowledge/experience in the area of integrated system/interface design, aerospace development process, electro-mechanical systems or aerospace mechanical systems is desired.

Education:
Minimum Degree: Bachelors’ of Science in an Engineering Discipline such as Mechanical Engineering, Aero Engineering, Electrical Engineering, Systems Engineering
 
Job Number: 52823
Job Location: Irvine, CA
Rate: $58
Per Diem: Possible
Overtime: Possible
Duration: 12+ months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer - Level 2

Description:
Location: Lexington, KY
Rate: $25.00 - $39.00/HR
Duration: 6 month contract
Shift: 1st Shift
Overtime: Exempt

*****MUST have an Active Secret Clearance or to have had one with the last 2 years*****

Description
Our client is seeking a systems engineer (SE) to perform integration and test (I&T) activities in support of the Special Operations Forces Support Activity (SOFSA) Program. As an SE I&T team member, you will work as part of an engineering team based in Lexington, KY. This program is critical to the success of US service men and women deployed throughout the world. Our mission is to rapidly and properly equip the SOF community and its war fighters with the best possible systems and equipment anywhere in the world. The team is focused mainly on modifying existing aircraft and integrating modified components (primarily electrical and mechanical) into various platforms based on customer specifications. The SE I&T Engineer will initially support the rotary mission area, but may occasionally support the fixed wing mission area, as required. The SE I&T Engineer will support the engineering team during design, integration, verification, ground and flight test, and customer support phases of the program. The SE I&T Engineer will develop and present I&T information for internal and external program reviews. The SE I&T Engineer will interface with engineering management, program management, customer I&T points of contact, and other internal organizations to ensure that necessary equipment, facilities, and resources are available to support I&T activities. I&T tasks include test planning and coordination, development of test plans, development of detailed test and demonstration procedures, demonstration and test execution, daily communication of progress to program leadership, integration issue identification and troubleshooting, demonstration/test result evaluation, and documentation of demonstration/test results.


Skill/Experience/Education
Mandatory:
• Proficient in generating I&T work products (Master Test Plan, Demonstration/Test Plans and Procedures, Reports, etc.)
• Experience with planning, coordinating, and executing electronics and mechanical I&T
• Experience in evaluating and documenting I&T results
• Experience with presenting I&T information to internal and external team members
• Familiar with trouble shooting and resolving issues that can arise during I&T activities
• Familiar with Systems Engineering and Design processes
• Proficient with Microsoft Office products
• Ability to travel to perform I&T efforts
• BS in Electrical Engineering, Mechanical Engineering, or Aeronautical Engineering Preferred

Desired:
• Experience with Faro laser or equivalent equipment use for mechanical alignment
• Experience with CAM2 Measure and/or Verisurf software packages
• Experience with data collection systems and Instrumentation
• Experience with RF systems I&T
• Familiarity with rapid response programs
• Experience with the coordination, planning and execution of integration and ground/flight test activities
• Experience in testing US military products and familiarity with military specifications and standards
• Experience in leading and supporting failure analysis and corrective action activities
• Experience in working programs from concept, development, integration, test, and into production
 
Job Number: 8600
Job Location: Lexington, KY
Rate: $25.00 - $39.00/HR
Per Diem: Split Possible
Overtime: Exempt
Duration: 6 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems/Software Engineer

Description:
Job Description
Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems. Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications.

14 Years with Bachelors in Science; 12 Years with Masters; 9 Years with PhD

In-depth experience of SAP PPM Modules with configuration experience.
Demonstrated proactive technical leadership of IT implementations
Demonstrated strong facilitation skills and IT systems design experience
Understanding of COTS implementations and application development
Understanding of multi-system interfaces
Demonstrated use of the Systems Development Life Cycle process
Previous implementation experience with .NET, Java, SharePoint products is a plus.
The ability to organize and manage large network centric projects.
Experience using Microsoft Word, Excel, Access, PowerPoint and Visio required
 
Job Number: VA40627
Job Location: Newport News, VA
Per Diem: Possible
Overtime: Possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Bill Carriveau
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
TEMP Senior Systems Safety Engineer CA

Description:
15002

Title TEMP Senior Systems Safety Engineer
Job Summary General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems.

We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

DUTIES AND RESPONSIBILITIES: •Support safety analysis of our Unmanned Aircraft System (UAS). The multiple programs in development support the US Army and US Air Force, along with many other US and Foreign customers.
• In this role, the successful candidate will work on an integrated Reliability and Safety team to support both customer risk acceptance, and airworthiness requirements.
• Responsibilities include, but are not limited to the following:
• Specific technical experience and knowledge should include ability to familiarize yourself with MIL-STD-882, operation and processes of System Safety Working Groups, and other related milestones such as PDR’s and CDR’s.
•Development of a System Safety Program Plan, Preliminary Hazard Analysis, Functional Hazard Analysis, System Safety Analysis / Safety Assessment Report, clear and concise system safety requirements, and support of the Hazard Tracking System.
•Understands the methods of identifying and categorizing Safety-Significant (safety-critical and safety-related) functions and their affects within the hardware, software, and human interfaces of the design architecture.
•Perform Fault Tree Analyses (Relex experience a plus).
•The ability to learn multiple aircraft subsystems to become an expert on how the systems as work as a whole.
•Provide human factors technical expertise on topics such as advanced user-interface technology development or the role of human users in automated or autonomous sub-systems in advanced vehicle systems.
•Analyze complex systems to determine potential for further development, production, interoperability, compatibility, or usefulness in a particular area, such as aviation.
•Advocate for end users in collaboration with other professionals including engineers, designers, managers, or customers.
•Conduct interviews or surveys of users or customers to collect information on topics such as requirements, needs, fatigue, ergonomics, or interfaces.
•Prepare reports or presentations summarizing results or conclusions of human factors engineering or ergonomics activities, such as testing, investigation, or validation.
•Perform functional, task, or anthropometric analysis, using tools such as checklists, surveys, videotaping or force measurement.
•Support Reliability & Maintainability analyses as required.
Job Qualifications

•Typically requires a bachelor’s degree, master’s degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; six or more years of experience with a bachelor’s degree, four or more years of experience with a master’s degree, or two or more years with a PhD.
•Defense acquisition experience and knowledge a plus.
•Experience with Unmanned Vehicles systems a plus.
•Develop and present technical presentations.
•Must have a thorough understanding of engineering concepts, principles, codes, and theory; experience demonstrating a broad application of those concepts; and, expanding knowledge of principles, concepts, theory, and practices in related technical specialties.
•Must possess the ability to develop and communicate new concepts; apply them accurately throughout an evolving environment; organize, schedule, and coordinate work phases; and, determine the appropriate approach at the task level or, with assistance, at the project level to provide solutions to a range of complex problems.
•Must have strong communication, computer, documentation, presentation, and interpersonal skills, ability to work independently and as part of a team; able to perform complex tasks in one or more engineering areas; capable of representing the organization as a prime technical contact and, lead a team of moderately experienced professional employees on single component projects.
•Able to work extended hours as required.
•US Citizenship required.
•May be required to obtain and maintain a security clearance.



Qualifications Essential Qualifications Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; six or more years of experience with a bachelors degree, four or more years of experience with a masters degree, or two or more years with a PhD. May substitute equivalent engineering experience in lieu of education. Must have a thorough understanding of engineering concepts, principles, codes, and theory; experience demonstrating a broad application of those concepts; and, expanding knowledge of principles, concepts, theory, and practices in related technical specialties. Must possess the ability to develop and communicate new concepts; apply them accurately throughout an evolving environment; organize, schedule, and coordinate work phases; and, determine the appropriate approach at the task level or, with assistance, at the project level to provide solutions to a range of complex problems. Must have strong communication, computer, documentation, presentation, and interpersonal skills, ability to work independently and as part of a team; able to perform complex tasks in one or more engineering areas; capable of representing the organization as a prime technical contact and, lead a team of moderately experienced professional employees on single component projects. Able to work extended hours as required. A Professional Engineering License and original work published in professional engineering journals are desirable.

City San Diego
State California
Travel Percentage Required 0% - 25%
Clearance Required? Desired
Work Schedule Rule 9/80
Temp Assignment Duration (# of Days) 365
 
Job Number: JE-15002
Job Location: San Diego, CA
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
TEMP Software Developer / DO-178B CA

Description:
12971

Title TEMP Software Developer
Job Summary General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems.

We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

DUTIES & RESPONSIBILITIES:•Design and Develop autopilot software for unmanned air vehicles from the requirements phase through field test.
•Focus is on real-time aircraft system/flight control using the C language.
•May occasionally be required to support flight/ground testing of software at the flight test facilities. Analyze flight data to investigate system behavior and anomalies. Perform peer review of other developer’s code and perform testing with UAV mockup in the Systems Integration Lab.
•Programming in both Linux and Windows environments.
•'C' programming capability and verbal/written communication.
•Ability to work under general supervision and interface effectively with other engineers of various disciplines, including flight controls design engineers.
•Interpret, debug and modify complex legacy software following GA process and coding standards.
•Developing software in a CMMI or DO-178 structured environment.


Additional Qualifications

Strong Knowledge and background with closed loop controls and how they work
Good knowledge of transfer functions
DO-178B
MATLAB experience a plus
Very strong problem solving and attention to detail

Qualifications Essential Qualifications Typically requires a bachelors or masters degree in computer science, information systems or related discipline and two or more years progressive software development experience with a bachelors degree. May substitute equivalent experience in lieu of education. Must have a general understanding of software development concepts, principles, and theory and demonstrate the ability to follow and apply the use of programming and analysis concepts. Must possess the ability to understand new concepts quickly and apply them accurately throughout an evolving environment and organize work assignments to meet established timetables. Good communication, computer and interpersonal skills are required to enable an effective interface with other professionals, to produce appropriate documentation, and to present results to a internal audience. The ability to work independently and as part of a team is essential. Must be able to work extended hours as required.
City San Diego
State California
Travel Percentage Required 0% - 25%
Clearance Required? Desired
Work Schedule Rule 9/80
Temp Assignment Duration (# of Days) 365
 
Job Number: JE-12971
Job Location: San Diego, CA
Per Diem: no
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
TEMP Software Developer CA

Description:
14887

Title TEMP Software Developer

Job Summary General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems.

We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

DUTIES AND RESPONSIBILITIES:•Determine user requirements and specifications and plan for software development within the broader organizational scope. Software development includes end-user, system level, and data management applications,
•Formulate detailed plans for the implementation of software solutions. In addition to program design this includes determining language, platform, and resource requirements.
•Implementation of design including coding, testing, and documentation.
•Deployment of applications across the enterprise including cross- platform compliance and insuring availability of necessary resources.
•Code maintenance including debugging and updating to keep pace with the evolving environment.
•Assist in planning for future applications based on new developments in computer technology.
•Communicate with the software developer group, with users, and with management as well as with the wider community through the publishing and presentation of technical papers.
•Maintain the strict confidentiality of sensitive information.
•Perform other duties as assigned.
•Responsible for observing all laws, regulations and other applicable obligations wherever and whenever business is conducted on behalf of the Company.
•Expected to work in a safe manner in accordance with established operating procedures and practices.

Additional Qualifications:
Development of Software Requirements Specification (SRS), Software Design Description (SDD), Software Test Description (STD) and other pertinent software artifacts.
Experience with Model Based Design (e.g., SCADE, MATLAB/Simulink) highly desired
Programming languages such as C, C++, Python.



Qualifications Essential Qualifications Typically requires a bachelors or masters degree in computer science, information systems or related discipline and two or more years progressive software development experience with a bachelors degree. May substitute equivalent experience in lieu of education. Must have a general understanding of software development concepts, principles, and theory and demonstrate the ability to follow and apply the use of programming and analysis concepts. Must possess the ability to understand new concepts quickly and apply them accurately throughout an evolving environment and organize work assignments to meet established timetables. Good communication, computer and interpersonal skills are required to enable an effective interface with other professionals, to produce appropriate documentation, and to present results to a internal audience. The ability to work independently and as part of a team is essential. Must be able to work extended hours as required.

City San Diego
State California
Travel Percentage Required 0% - 25%
Clearance Required? Desired
Work Schedule Rule 9/80
Temp Assignment Duration (# of Days) 365
 
Job Number: JE-14887
Job Location: San Diego, CA
Duration: 6 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
TEMP Software Developer CA

Description:
14751
San Diego, CA
50/hr max

Title TEMP Software Developer
Job Summary General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems.

We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

DUTIES & RESPONSIBILITIES: •In this role, the successful candidate must have advanced conceptual understanding of software development concepts, theory, and operations and have applied that knowledge in the implementation of new principles and concepts.
•Candidate will work write embedded C++ applications in a Linux environment.
•Chosen candidate will work on both legacy and new embedded code bases.
•Candidate will work in a multi-disciplined environment, designing, implementing, and debugging software that interfaces with FPGAs, GPGPUs and other hardware components utilizing both COTS and custom boards.
•The candidate must be a self-starter that is motivated to learn and apply new technical concepts quickly.

*Job Qualifications

•Typically requires a Bachelors degree or Masters degree in engineering or a related technical discipline from an accredited institution and 5 or more years of experience with a Bachelors degree, 3 or more years of experience with a Masters degree.
•The candidate must have the ability to understand and apply new technical concepts quickly.
•The candidate must be a strong oral and written communicator. The candidate must demonstrate the ability to work well in teams.
•The candidate must be proficient in C++ coding in embedded systems, and be able to provide examples of completed projects.
•It is desirable, but not required for the Candidate to have experience with real-time systems such as RT Linux, Free RTOS, or VxWorks.
•It is desirable for the candidate to have experience in signal processing code development, system integration, and data analysis.


Qualifications Essential Qualifications Typically requires a bachelors degree, masters degree or PhD in computer science, information systems or a related discipline and progressive software development experience as follows; four or more years of experience with a bachelors degree or two or more years of experience with a masters degree. May substitute equivalent experience in lieu of education. Must have a complete understanding of software development concepts, principles, and theory and demonstrate complete understanding and application of programming and analysis concepts. Must possess the ability to understand new concepts quickly and apply them accurately throughout an evolving environment. Ability to organize, schedule, and coordinate work phases and, determine the appropriate approach at the task level or, with assistance, at the project level and to provide solutions to a range of complex problems. Must have strong communication, computer, documentation, presentation, and interpersonal skills, ability to work independently and as part of a team; and, lead a team of less experienced professional employees on semi-routine tasks. Able to work extended hours as required.

City San Diego
State California
Travel Percentage Required None
Clearance Required? Desired
Work Schedule Rule 9/80
Temp Assignment Duration (# of Days) 180
 
Job Number: JE-14751
Job Location: San Diego, CA
Rate: 50hr max
Per Diem: no
Duration: 6 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Writer

Description:
Sr. Technical Writer should have extensive experience developing new and making revisions to Instructions for Continued Airworthiness (ICA) procedures. Experience should include, but not limited to, on-aircraft field level maintenance and inspection procedures, wire diagram and/or standard wire practice manual content from supplier and engineering data. Experience with ENOVIA SmarTeam or similar Product Lifecycle Management (PLM) database products strong desire. Familiarization with CATIA three-dimensional (3D) modeling and two-dimensional (2D) CAD standards, format, and 3D/2D software products

Bachelor’s degree or equivalent experience in the authoring of technical publications. Four (4) years of Technical Publications writing experience. Advanced knowledge of all aircraft systems methodology.
 
Job Location: Savanah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test & Evaluation Engineer 3

Description:
Test & Evaluation Engineer 3

Location: Ladson, SC
Duration: 12 months

Job Description:
Supports the development and verification of methods in support 737 MAX inlet assembly. Develops detailed test procedures, and configuration definition, needed to perform the measurement test and minimize risk within the constraints of the test plan. Develops solutions to system problems of limited scope and impact. Designs test hardware, software and systems to achieve requirements. Uses analytical tools to verify the design. Analyzes, processes, and formats data to customer requirements. Reviews data, including off-nominal data, for accuracy, quality and/or fidelity prior to delivery to customer. Prepares and publishes test reports to document test results and satisfy requirements. Presents test results internally. Archives data and reports. Trains others. Works under general direction.

This assignment is in support of 737 MAX inlet assembly. This engineering will establish measurement plans to monitor hardware variation throughout the assembly process, measure product to create 3D shim profile shapes, and verify end product geometric profile. This assignment requires an expert knowledge of the leica 960 T-scan and associated software platforms, such as Spatial Analyzer, Polyworks and CATIA. This assignment requires the ability to create automated scripting to post process the scan data.

Education / Experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

Skill Code: 64W-Metrology

If interested then please share updated resume at ravi@iconma.com
 
Job Number: 18-02054
Job Location: Ladson,, SC
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test & Evaluation Engineer III - (SC)

Description:
Supports the development and verification of methods in support 737 MAX inlet assembly. Develops detailed test procedures, and configuration definition, needed to perform the measurement test and minimize risk within the constraints of the test plan. Develops solutions to system problems of limited scope and impact. Designs test hardware, software and systems to achieve requirements. Uses analytical tools to verify the design. Analyzes, processes, and formats data to customer requirements. Reviews data, including off-nominal data, for accuracy, quality and/or fidelity prior to delivery to customer. Prepares and publishes test reports to document test results and satisfy requirements. Presents test results internally. Archives data and reports. Trains others. Works under general direction.

This assignment is in support of 737 MAX inlet assembly. This engineering will establish measurement plans to monitor hardware variation throughout the assembly process, measure product to create 3D shim profile shapes, and verify end product geometric profile. This assignment requires an expert knowledge of the leica 960 T-scan and associated software platforms, such as Spatial Analyzer, Polyworks and CATIA. This assignment requires the ability to create automated scripting to post process the scan data.

Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

ACS Group (formerly 'Comforce')
 
Job Number: Test&EvalSC
Job Location: Ladson, SC
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Engineer

Description:
Prefer Secret Clearance

The desired candidate will be familiar with instrumentation and test hardware and software solutions with an emphasis on C, C++, National Instruments C for Visual Instrumentation, National Instruments Test Stand and Lab View. Experience with MATLAB a plus.
 
Job Number: 1604
Job Location: FL
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Engineer

Description:
Must be able to obtain and maintain a DoD Secret level security clearance.

Simulation tools experience such as Matlab.
perform the unit level test, engineering integration and test, engineering test & evaluation and support system level testing of COTS or custom computing hardware and real-time embedded signal processing firmware/software applications.

Minimum of 8 years of professional level experience testing hardware subassemblies, nests, cabinets and systems for functional and performance requirements. Experience in testing digital signal processing hardware and real-time software applications using C++ Object Oriented design and programming. Configuration management and change management experience using ClearCase, ClearQuest and UCM.
 
Job Number: 41529
Job Location: NJ
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Engineer

Description:
Test Engineer

Location: Bothell, Washington

Terms: Long Term Contract Employment

Education:

Bachelor's Degree in Electrical, Mechanical, Computer Engineering or equivalent Experience:
10+ years professional experience in a medical device industry or other regulated environment
Proven ability to perform problem solving and troubleshooting
Excellent written and verbal communication skills required
Analyzing product and system & sub-system requirements.
Writing detailed test procedures that evaluate product against documented mechanical, electrical and software requirements.
Experience conducting System-level testing of a product which includes both HW and SW components. Proficient in using typical lab equipment like oscilloscopes
Experience with CAPAs is highly desirable
You are responsible for:

Define, document, and continuously improve verification tests including conducting peer reviews and maintaining traceability to requirements
Perform verification tests and conduct analysis of the test results to ensure complete verification of the requirements
Participate in root cause analysis for assigned CAPAs
Identifying, analyzing, owning and driving technical issues to resolution
Participate in reviews of requirements, design documents, and test related artifacts
Perform work with little to no supervision
 
Job Number: 382459
Job Location: Bothell, WA
Rate: 60.00
Per Diem: No
Overtime: Possible
Duration: 12 Mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: CDI CORPORATION
Attention: Kris Douglas
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Engineer (Hands-on)

Description:
Test Engineer (Hands-on)

Location: Burbank, CA
Pay Rate: $28/hr - $33/hr
Duration: Temp to Hire
Shift: not specified

SUMMARY: Develops test procedures and coordinate efforts with other engineering departments to support flight development and qualification programs. Performs mechanical testing of individual components and assemblies to ensure conformance with established specifications.

ESSENTIAL FUNCTIONS: The duties are not limited to the following description:

1. Creates and coordinates overall test plans and assists in developing test procedures and reports which meet the customer’s program testing requirements.
2. Designs test fixtures and reconfigures test equipment in order to meet program goals.
3. Reads and interprets technical procedures and drawings to determine test objectives, set-up requirements, testing limits, and acceptance criteria.
4. Installs test fixtures and specimens to the test equipment.
5. Operates static and dynamic servo-hydraulic test machines and electro-dynamic shaker systems.
6. Completes paperwork associated with the test procedure, including filing test results either electronically or in a conventional filing system.
7. Reviews and analyzes test data to determine if it meets program requirements.
8. Recommends revisions to test method or work flow to optimize the process while maintaining test integrity in accordance with internal and external customer requirements.
9. Performs new technology research on state-of –the-art test systems and software to determine whether new equipment will provide the Company with a cost or technological advantage.
10. Provides test support and analyzes test fixtures, machines, and data to solve problems on test programs.
11. Performs routine cleaning and servo-hydraulic material test machines and electro-dynamic vibration shakers equipment maintenance. Troubleshoots and resolves issues with test equipment.
12. Prepares, generates and maintains Statistical Process Control (SPC) charts and data in order to monitor the production and testing processes.
13. All other duties as assigned.
14. Responsible for promoting and abiding by the HSE rules and policies.

PRIMARY TOOLS OR EQUIPMENT: Able to set-up and operate servo-hydraulic material test machines and electro-dynamic vibration shakers with both manual and computer controllers. Able to set-up and operate temperature and vacuum environmental chambers. Able to set-up and operate digital and analog meters and displays, spectrum analyzers, plotters, recorders, dial indicators, calculators, various manual and pneumatic hand tools and other equipment and tools typically found in the test lab. Able to use measurement tools such as calipers, dial indicators, micrometers, weigh scales, and machinist scales. Ability to use shop hand tools, pneumatic tools, lifting devices, and cranes.
Use of typical office equipment such as telephones, computers (Microsoft Excel and Word), copiers, printers, fax machines, e-mail, scanners, etc.

KNOWLEDGE AND SKILLS REQUIRED:

Education and/or Experience: Bachelor’s degree in Mechanical Engineering, Electrical Engineering, or Applied Mechanics. Two years test-related experience in the field of Aerospace or Applied Mechanics, one year basic electronics and one year in machine design, or equivalent experience.

Language Skills: Able to read and comprehend instructions, correspondence, and memos. Able to effectively communicate verbally and in writing information to customers, clients, and employees.

Problem Solving: Able to apply logic, segregating the facts, make a decision, and carry out task.

Computer Skills: Working knowledge of Windows and word processing, spreadsheets and databases. Proficient in MS Office (Word, PowerPoint, Excel, Outlook).

Other Teamwork or Skills: Ability to participate as a team member. Knowledge of industry best practice in Configuration Management practices. Have an understanding of software and machine maintenance. Exercise excellent organization, communication and interpersonal skills.

ABILITIES REQUIRED:

Physical Requirements: While performing the duties of this job, the employee is frequently required to sit, stand, walk, use hands to finger, handle or feel objects and reach with hands and arms. The employee is occasionally required to stoop, kneel, crouch and lift light to moderate weighing items. Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus from close items to items at a distance.
 
Job Number: 8475
Job Location: Burbank, CA
Rate: 28-33
Per Diem: Split Possible
Overtime: Possible
Duration: Temp to Hire
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Engineers - Orlando, FL

Description:
STS AeroStaff Services is hiring Test Engineers in Orlando, Florida.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Designs, develops, and implements testing methods and equipment
• Plans and arranges the labor, schedules, and equipment required for testing and evaluating standard and special devices
• Provides test area with parameters for sample testing and specifies tests to be performed
• Compiles data and defines changes required in testing equipment, testing procedures, manufacturing processes, or new testing requirements
• Responsible for testing all customer samples and for special tests that cannot be performed in the test area
• Contributes to the completion of specific programs and projects
• Frequent inter-organizational and outside customer contacts
• Represents the organization in providing solutions to difficult technical issues associated with specific projects
• Provides technical solutions to a wide range of difficult problems
• Solutions are imaginative, thorough, and practicable, and consistent with organization objectives

Basic Qualifications:

• Bachelor’s degree from an accredited college in a related discipline, or equivalent experience/combined education, with 5 years’ of professional experience; or 3 years’ of professional experience with a related Master’s degree

Preferred Qualifications:

• The desired candidate will be familiar with instrumentation and test hardware and software solutions with an emphasis on C, C++, National Instruments C for Visual Instrumentation, National Instruments Test Stand and Lab View. Experience with MATLAB a plus

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 41499
Job Location: Orlando, FL
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Thermodynamic Engineer

Description:
Thermodynamic Engineer


Description:
Thermodynamic Engineers with a suggested mix of 1 Sr and 2 Jr experience engineers in either Integrated Propulsion/Fluids Analysis OR Non-Integrated Fluid Systems Propulsion/Fluids Analysis.

IFS Propulsion/Fluids Analysis Tasks
- Perform Prop/Fluids Analysis related flight and ground control system software testing and develop recommendations to resolve issues. Perform Prop/Fluids Analysis related flight simulation testing and verification. Work closely with ground software and IFS team.

Non-IFS Propulsion/Fluids Analysis Tasks
- Perform fluids and thermodynamic analyses for booster (Atlas V and Delta IV) and upper stage (Centaur and DCSS) to support mission integration. Tank pressurization and vent system fluids analysis, including defining control levels and associated flight software constants and establishing helium margin. Depletion system, Reaction Control System, feedline, and purge system fluids analysis. Propellant utilization system, and propellant tank slosh fluids analysis. Perform pressure drop, line sizing, and orifice sizing fluids analyses for ground systems that support booster and upper stage airborne systems. Perform various transient flow analyses such as flow-induced vibration and water-hammer analyses. Document fluids and thermodynamic analysis.
 
Job Number: 777
Job Location: Denver, CO
Rate: BOE
Per Diem: yes
Overtime: Possible
Duration: 12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Eric Janda
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/234-6123
800 Phone: 866/914-9724
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Thermodynamics Engineer – Level 4

Description:
Location: Denver, CO
Rate: DOE
Duration: 1 year contract (starting in January)
Overtime: Exempt

**MUST be a U.S. Citizen**

Job Description:
- Performs thermal analysis at both the detailed component level and at the systems level.
- Thermal analyses are performed to verify designs will operate within prescribed temperature limitations, and to prescribe thermal protection systems when needed.
- Develops specialized analytical tools as required to perform these functions.
- Develops procedures and plans for thermodynamic test programs when existing analytical capabilities are insufficient.
- Resolves issues related to thermodynamics that arise due to operational use in the field.

Basic Requirements:
- Bachelors Degree in Mechanical, Chemical, Aerospace or associated field of Engineering
- 10 years demonstrated ability to perform system-level thermal analyses.
- Capability to interpret system-level requirements, perform analysis to verify that those requirements are met, and document the verification results.
- Ability to build analysis models and tools based on program needs.
NOTE: Relocation is not available

Preferred Qualifications:
- Candidate must have the ability to quickly understand and become proficient with various analysis tools and associated computer programs.
- Experience with multiple software tools is desirable including ability to use, Matlab, Sinda/FLUINT, Thermal Desktop, and SpaceClaim.
- Demonstrated proficiency applying analysis results to hardware solutions is desirable
- Ability to support test activities, including requirements definition, test planning, test, and test reporting is preferred
- Experience with aerospace, and specifically space system, work is desirable including knowledge of cryogenic propulsion systems.
- Risk management experience, including any human spaceflight experience, is desirable Works well in team environments and with minimum supervision
 
Job Number: 7983
Job Location: Denver, CO
Rate: DOE
Per Diem: Split Possible
Overtime: Exempt
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Thermodynamics Engineer/Analyst - Level 4

Description:
Thermodynamics Engineer/Analyst – Level 4

Location: Denver, CO - (Centennial, CO)
Rate: DOE
Duration: 1 year contract
Overtime: Exempt

**MUST be a U.S. Citizen**

Job Description:
- Performs thermal analysis at both the detailed component level and at the systems level.
- Thermal analyses are performed to verify designs will operate within prescribed temperature limitations, and to prescribe thermal protection systems when needed.
- Develops specialized analytical tools as required to perform these functions.
- Develops procedures and plans for thermodynamic test programs when existing analytical capabilities are insufficient.
- Resolves issues related to thermodynamics that arise due to operational use in the field.

Basic Requirements:
- Bachelors Degree in Mechanical, Chemical, Aerospace or associated field of Engineering
- 10 years demonstrated ability to perform system-level thermal analyses.
- Capability to interpret system-level requirements, perform analysis to verify that those requirements are met, and document the verification results.
- Ability to build analysis models and tools based on program needs.
NOTE: Relocation is not available

Preferred Qualifications:
- Candidate must have the ability to quickly understand and become proficient with various analysis tools and associated computer programs.
- Experience with multiple software tools is desirable including ability to use, Matlab, Sinda/FLUINT, Thermal Desktop, and SpaceClaim.
- Demonstrated proficiency applying analysis results to hardware solutions is desirable
- Ability to support test activities, including requirements definition, test planning, test, and test reporting is preferred
- Experience with aerospace, and specifically space system, work is desirable including knowledge of cryogenic propulsion systems.
- Risk management experience, including any human spaceflight experience, is desirable Works well in team environments and with minimum supervision
 
Job Number: 8530
Job Location: Centennial, CO
Rate: DOE
Per Diem: Split Possible
Overtime: Exempt
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Designer III & IV - Everett, WA

Description:
SEVERAL OPENINGS IN THE SEATTLE/EVERETT, WA AREA.

CATIA V5

Investigates and develops complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements. Participates in design reviews, collects design requirements, creates and revises drawings and models, researches the application of robotics, automation and new technology to support the build plan. Creates off-load packages, specifications, purchase requests and usage instructions for equipment and tooling. Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Develops and documents equipment and tooling inspection and usage instructions, preventative maintenance plans, and user training. Provides technical support for engineering changes and discrepancies by investigating problems and analyzing data to identify solutions. Maintains hardware and software configuration. Assesses and makes recommendations for disposition of equipment and tooling.

AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.

CATIA V5
 
Job Number: ToolDesWA
Job Location: Everett, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 10+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

Back to Advanced Job Search