Job Search Results

747 listings were found that matched your search words: Keywords: Aircraft ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2021/01/16 Saturday 06:52AM Pacific Time by ContractJobHunter. )

Listings 1 - 747

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2 Aircraft Stress Engineers - Composites

Description:
Aircraft composite stress engineering contractors needed.
MUST BE US PERSONS.
Ability to work in a fast paced environment.
MUST have a good Composites Primary Airframe Structures background.
FAR 23 experience is a huge plus.
Classical hand analysis, Nastran, FEMAP a plus
US PERSONS REQUIRED

Position Responsibilities
This is a Senior Level Contract Stress Analyst position.
General Minimum Requirements:
• Education: MS with 8+ years, or BS with 1O+ years of relevant experience
• Create engineering criteria and analysis methods to ensure that the work meets all program requirements (e.g., airworthiness, customer requirements, internal methods and processes, etc.).
• Actively develop and evaluate plans for activities and soundness of proposed methods and analysis to meet the program schedules and airworthiness standards.
• Select appropriate material systems for structures applications and identify all material testing requirements.
• Identify and communicate technical risks to the relevant stake holders through program status reports in a timely manner.
• Review all program critical documents such as stress reports, manufacturing plans and procedures, and structural test plans in a timely manner to ensure compliance with design and loads requirements.
• Resolve complex engineering issues in creative and effective ways as to balance technical product, cost, and schedule.

Must be a US Citizen, or Greencard holder.

THE STRUCTURES COMPANY IS AN AA/EOE
 
Job Location: Manassas, VA
Rate: $75-85/hr DOE
Per Diem: Yes
Overtime: Possible
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
3 Aircraft Stress Engineers with Composites

Description:
3 Aircraft Composite Stress Engineers Needed.
Require 10+ years of aircraft/aerospace stress analysis with a good composites background.
Previous FEMAP experience is a plus.
Composite airframe analysis experience a MUST.
MUST be US Persons

Qualifications:
-Experience in aircraft or spacecraft composite, design and analysis processes
-Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures
-Minimum 10 years or more of applicable experience in the analysis of structural systems using strength of materials and finite element based methods
-Experience with free-body diagrams and classical stress analysis techniques
-Experience with FEMAP
-Rapid prototyping experience a strong plus
-Excellent computer skills, including Outlook, Word, Excel and PowerPoint
-Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
-Applicants must be U.S. persons as defined by ITAR
Educational Requirements-
Bachelors degree from an accredited institution, with a concentration in a relevant Engineering discipline

The Structures Company is an AA/EOE.
 
Job Location: Mojave, CA
Rate: $80-85/hr DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Last Updated: 01/04/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2 Stress Engineer Openings - Composites - Contract-to-Hire

Description:
We have a need for 2 Aircraft Composite Stress Engineers that are open to a contract-to-hire scenario. MUST be US Citizens.
Require 10+ years of aircraft/aerospace stress analysis with a good composites background.
Previous FEMAP experience is a plus.
Composite airframe analysis experience a MUST.
MUST be US Citizens

Qualifications:
-Experience in aircraft or spacecraft composite, design and analysis processes
-Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures
-Minimum 10 years or more of applicable experience in the analysis of structural systems using strength of materials and finite element based methods
-Experience with free-body diagrams and classical stress analysis techniques
-Experience with FEMAP
-Rapid prototyping experience a strong plus
-Excellent computer skills, including Outlook, Word, Excel and PowerPoint
-Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
-Applicants must be U.S. Citizens
Educational Requirements-
Bachelors degree from an accredited institution, with a concentration in a relevant Engineering discipline

The Structures Company is an AA/EOE.
 
Job Location: Mojave, CA
Rate: Open
Per Diem: Yes
Overtime: Yes
Duration: Contract-to-hire
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2560 - AVIONICS SYSTEMS ENGINEER - cv, word doc only

Description:
Interfacing with customers (both internal and external) during definition and implementation of avionic system integration.

Execute program milestones according to established schedule and ensure critical path and key dependencies are effectively managed to achieve successful outcome.

Reviewing detailed execution plans and schedules with the project management team to ensure adequacy, completeness, and harmonization with the overall program level plan.

Generating system requirements documents for physical and logical interfaces.

Defining cockpit display formats and control operation in conjunction with the customer.

Developing and running functional test procedures for all avionics sub-systems.

Advising the customer on the physical installation of avionics equipment.

Troubleshooting and diagnosing avionics problems on the systems integration rig and flight test aircraft (may involve travel)

Documenting, tracking, and resolving avionics problems resulting from both design errors and equipment failures.

Generating certification documents for subsystems demonstrating compliance with OEM certification plans.

Supporting Change Management related activities at the program level.

Bachelor's Degree in applicable engineering or science field, and ten years of related experience, or, in the absence of a bachelor's degree, sixteen years of related experience.

Detailed systems knowledge is required in at least five of the following systems: AFCS, Air Data, Cockpit Audio, Cockpit Printers, Datalink, EFIS, EICAS, Enhanced Vision Systems, FANS, FMS, GPS, Graphical Datalink Weather, HUD, Integrated Modular Avionics (IMA), On-board Maintenance Systems, Radio Altimeters, Synthetic Vision Systems, TAWS, TCAS/Transponders, VHF Comm, VHF Nav, XM Weather.

Analysis - thinking through a logical, in-depth analysis of a problem or situation.

Cooperation - Serves as a role model to his or her coworkers by demonstrating respect and sensitivity for fellow workers and promoting open discussion of issues.

Coordinating - Provides a seamless stream of communication and support.

Customer Service Orientation - Fully comprehends the value of the organization's customers and champions strategies to ensure world-class service.

Dependability - Consistently produces exemplary results that can be used as prototypes for future projects.

Judgment - Able to quickly assess the costs, benefits, and risks of a decision while using sound logic to ultimately make well-informed decisions.
 
Job Number: 2560
Job Location: Toronto, Canada
Rate: 85.00
Per Diem: No
Overtime: 1.5
Duration: Long Term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2571 - EMC ENGINEER - cv, word doc only

Description:
Execute complex engineering assignments requiring expertise within EMC field.

Analyze modifications at Aircraft level and check compliance with certification regulations.

Estimate the level of impact of complex projects.

Propose plans for production ramp-up.

Participate in complex investigations related to cost reduction.

Participate in meetings and design reviews with system or structural suppliers for design optimization and cost reduction.

Participate in Continued Airworthiness projects and propose risk mitigating solutions.

University degree in Aerospace Engineering or equivalent. Specialization in Electromagnetic Compatibility and Susceptibility is required.

Have a minimum of 8 years working experience in the specialty within the Aerospace domain.

Are familiar with the relevant industry standards and best practices such as DO-160, SAE ARP, FAA regulations, as well as other applicable airworthiness regulations.

have good knowledge about FAR 25.981 regulations and fuel tank protection against lightning and static electricity
Familiarity with electromagnetic simulation / analysis tools (such as EMA3D) is a strong asset.

Have strong analytical skills.

Have team spirit, and have the ability of working in a multicultural environment.

Are self-motivated and are proactive in finding solutions to problems.

Have strong communication skills (written and spoken) in French and English.

Are able to travel.
 
Job Number: 2571
Job Location: Mirabel, Canada
Rate: 58.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2580 - AVIONICS SYSTEMS INTEGRATOR - cv, word doc only

Description:
Responsible, as an Avionics Systems Integrator, to perform various tasks related to the development, qualification, certification and in-service support of Avionics systems on Challenger aircrafts.

Responsible for supporting investigation for in service and manufacturing issues and performing root cause analysis of Avionics systems.

Participate in the Avionics Systems architecture design to meet Aircraft Design Requirements and Objectives.

Support the Bombardier Flight Test Center in development and certification tests; witnessing of tests may be required.

Support the Final Assembly Line and In Service Aircraft for any development issues.

Manage, review and approve the deliverables of the Avionics System Suppliers.

Work with other functions & disciplines of the Challenger program to provide required information and also to collect required data to allow the Avionics design, development & certification effort to progress.

Support other departments such as Production, Customer Support, Program Office and Product Planning.

Participate in meetings and design reviews with Avionics System Suppliers and certification authorities.

Be able to travel is a must.

University degree in Electrical, Electronics, Software, or Aerospace Engineering. with at least five (5) years of relevant experience with the design, development, integration and certification of Avionics systems.

Good knowledge with the specification, design, integration, test and certification of Avionics systems on aircraft.

Must have a good knowledge of RTCA documents DO-178 and DO-160.

Must be familiar with part FAR25/525 certification process and with the ARP4754 standard.

Have an experience with civil aircraft and airworthiness authorities.

Are proficient with the use of Microsoft Office software tools to produce presentation and reports.

Have the ability to work well in a team environment.

Have strong communication skills (written and spoken).
 
Job Number: 2580
Job Location: Montreal, Canada
Rate: 58.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2581 - RELIABILITY, MAINTAINABILITY & SAFETY ENGINEER - cv, word doc only

Description:
Prepare reliability & safety studies, Failure Modes and Effects Analysis (FMEA), Aircraft Functional Hazard Analysis, Fault Tree Analysis and System Safety Analysis to certify modifications to the Challenger aircraft systems.

Participate in internal and external Design Reviews with Partners/Suppliers. You will be responsible for reviewing Partner%u2019s/Supplier%u2019s reports and ensure reliability & safety requirements are met.

Interface with various (Design Authorized Delegate) DAD disciplines Systems Engineering, Flight Sciences as part of the Integrated Design Team.

Interface with other internal and external customers (e.g. Airworthiness, Product Support, Marketing, Partners, and Certification Authorities).

Be involved with the maintenance engineering group to evaluate potential changes to certified maintenance tasks in conjunction with the DAD.

Evaluate potential modification/creation of Master Minimum Equipment List (MMEL) items with Transport Canada Civil Aviation (TCCA) and Federal Aviation Administration (FAA).

Prepare and present risk assessments for continued airworthiness queries.

Have at least 15 years of experience in the field of aircraft reliability/safety and in particular the following:

Creating and reviewing System safety assessments that meet the requirements of ARP4761.

Experience in evaluating in-service issues which are subject to safety.

Review and propose different certified maintenance task intervals for previously certified systems.

Experience with Continued Airworthiness Risk Assessments (CAA).

Experience in creating and proposing changes to the MMEL for TCCA and FAA.

Have experience in applied aerospace reliability engineering for mechanical and electrical components including reliability prediction.

Have completed various types of aircraft level assessments such as Particular risk analysis (rotor burst, tire burst) and zonal analysis.

Experience with ARP4754 is considered an asset.

Must be familiar with common reliability and safety processes and tools to perform the above mentioned tasks (e.g. Reliasoft, CAFTA.).

Experience with civil aircraft and civil airworthiness regulations is mandatory (TCCA, FAA, EASA).

Excellent comprehension and applied skills with FAR/JAR 25.1309 and all associated guidance material.

Good writing skills and communication skills in English is essential for the position.

Must possess the ability to work with minimum supervision and be a team player.

Must also be a person with initiative, a strong sense of responsibility and good engineering judgment.
 
Job Number: 2581
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2582 - HYDRO-MECHANICAL SYSTEMS ENGINEER - cv, word doc only

Description:
Take part in the integration of the flight control, hydraulic and/or landing gear system for the definition, specification, design, analysis, modification, test and certification of hydro-mechanical systems.

Coordinate product development activities between the supplier of the system and the affected work packages.

Ensure successful design, validation, certification and delivery of the system.

Ensure successful completion of each development phase deliverables (may author, review, approve).

Problem solve the technical issues in a cross functional environment.

Be involved in the design and integration of the system.

Review the design and documentation of all the aspects related to your system.

Check for quality of the Supplier's analyses.

Validate and verify system requirements as well as system performance through design reviews, analyses, rig and aircraft testing.

Define, prepare and execute qualification and certification tests.

Work with supplier in the investigation and resolution of test findings.

Bachelor or Master's (preferred) degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of five (5) to seven (7) years.

Have a background in design, integration, development and certification of Hydro-Mechanical Systems.

Cognizant of the relevant Airworthiness Regulations and certification process.

Good oral and technical writing skills in English (required).

Are motivated, self-starter, organized, autonomous and able to work under limited supervision.

Ateam player and able to work with suppliers and customers.

Are a dynamic person with initiative, a strong sense of responsibility and good judgment.

Have knowledge of MS Office software (essential).

Have knowledge of CATIA, Matlab, Simulink (an asset).
 
Job Number: 2582
Job Location: Toronto, Canada
Rate: 55.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2584 - ELECTRICAL WIRING INTERCONNECT SYSTEM (EWIS) ENGINEER - cv, word doc only

Description:
Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS.

Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical.

Support Production; respond to RNC.

Provide technical assistance to engineering staff and contribute to completion of project milestones.

Apply knowledge to provide solutions to a variety of technical problems of moderate scope and complexity, using a combination of judgment with defined practices and procedures.

Requirements

Bachelor Degree in Aircraft Avionics or Electrical Engineering or Bachelor Degree in Engineering with equivalent work experience in Wiring Integration or Design.

Have a minimum of 15 years of relevant aerospace experience.

Must have wiring design, wiring installation and/or wiring troubleshooting experience and you are familiar with ECAD tools & processes.

Are capable of interfacing with wiring diagrams, system, and EMI/EMC requirements.

Have an intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installations and maintainability requirements.

Have an excellent verbal and written communication skills, and computer skills (PC/MS Office) are required.

Must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative.

Have knowledge of Catia V5.

Have an Avionic and or EWIS MRB approval knowledge and understanding, an asset.

English - French working knowledge an asset.
 
Job Number: 2584
Job Location: Canada
Rate: 61.00 US
Per Diem: Paid - 3mt
Overtime: Paid - NOT at 1.5X
Duration: 12 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2585 - DESIGN ENGINEER - CV in 'word doc - only'

Description:
Provide expertise for the design and manufacturing of aerospace components (Metallic & Composite aircraft structure, systems installation and hardware/materials).

Participate in the identification of design ideas.

Analyze current engineering design and proposed new Design solution to facilitate the assembly of the components.

Support Design plan, coordinate its implementation and draw conclusions.

Support recommendation to senior management on strategies to Design assembly improvement.

Support prioritization of ideas implementation, based on ROI (Return on Investment) but also other criteria's and program requirements.

Support processes and strategies around the batching/combination of ideas to ease the implementation of design improvements.

Review supplier drawings, dimensional tolerances, Datum definition, manufacturing processes, process capabilities, tooling philosophy and provides recommendations as needed.

Support integration team in the preparation of the Product Change Request (PCR).

Requirements:

Have a University degree in Aerospace or Mechanical engineering or in a related field of Design.

Have a minimum of 15 years of experience in aircraft structure and manufacturing organization.

Have a good understanding of design, manufacturing and quality processes used in aerospace for metallic and composite structures, system installation and hardware/materials.

Have prior experience in design for assembly or other aircraft program optimization activity, an asset.

Must have knowledge of aircraft structures (Primary & Secondary) & Systems Installations, hydraulics, fuel etc., detailed assembly installations and detailed drawings 3DMBD.

Must have knowledge of SAP, CATIA V5/ENOVIA and (GD&T) Geometric Dimensioning and Tolerance.

Must have excellent troubleshooting skills.

Have great communication skills: can explain complex problem in simple words.

Are able and efficient at managing several projects in parallel.

Have a high sense of commitment, and a willingness to accept responsibilities while acting independently in a high-pressure and production ramp-up environment.

Have working experience using Catia V5 and Microsoft tools.

Are bilingual (French and English), is an asset.

Are able to travel to on-site supplier in USA, Europe and Asia.
 
Job Number: 2585
Job Location: Canada
Rate: 56 USD
Per Diem: Paid - 3mt
Overtime: Paid - NOT at 1.5X
Duration: 12 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Mechanics

Description:
STS Mod Center is now hiring A&P Mechanics to join its award-winning team in Melbourne, Florida.

Qualifications:
Previous three years AP experience.
Must have valid AP license.
Knowledge on the CRJ200 and genfams preferred.
Must hold a valid Driver License.
Must not be under a doctor’s care with limited work restrictions.
Must be able to pass a back ground check and obtain all necessary badging.
Must be able to ascend/descend ladders, stairs and work stands unassisted.
Must be able to bend, kneel, crawl and stoop frequently in confined spaces.
Must be able to lift up to 75 pounds unassisted.
Must be willing to work in an environment that is subject to changing climate conditions and moderate noise levels.
Must have excellent communication and people skills.
Must be able to exercise good judgment in a team environment as well as in aircraft maintenance and safety.
Must have problem solving and organizational skills.
Must be able to read and understand company and manufacturer Manuals.
Must be able to perform all line maintenance functions un-supervised at any time.
Must own and provide a minimum set of hand tools.
Benefits:
STS Mod Center offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-800-359-4787.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 48777
Job Location: Melbourne, FL
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS Technical Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
APG Mechanic / C-130 - no clearance URGENT SC

Description:
166686
Job Title: APG Mechanic

Work Site Address: Greenville, SC 29605
Job Number: 2465-1
Max Pay Rate: $33.83/hr
Start Date: 11/4/2019
End Date: 7/31/2020
Position Type: Contract

Job Summary:
Performs a variety of mechanical duties involving diagnosis of malfunctions and required maintenance, disassembly, rework, repair, replacement, re-assembly or adjustment of various aircraft systems in accordance with technical specifications, engineering instructions, and FAA regulations.

Qualifications and Education Requirements
C-130H Experience


Skills: Category Name Required Importance Experience
Areas of Expertise C-130H No 1 4 - 6 Years

Qty 2 positions
 
Job Number: JEG-2465-1
Job Location: Greenville, SC
Rate: 33.38/hr max
Duration: 8 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
APG Mechanic / Engine and Propeller Rigging URGENT SC

Description:
166498 Job Title: APG Mechanic
Client Department or BU: Greenville
Job Category: Installation - Maint - repair

Work Site Address: Greenville, SC 29605
Job Number: 2193-1
Max Pay Rate: $29.00/hr
Start Date: 10/21/2019
End Date: 12/31/2019
Position Type: Contract

Job Summary:
This role has 3 open positions that the hiring manager is very eager to fill. Please send qualified candidates ASAP.

Job Description:
Performs a variety of mechanical duties involving diagnosis of malfunctions and required maintenance, disassembly, rework, repair, replacement, re-assembly or adjustment of various aircraft systems in accordance with technical specifications, engineering instructions, and FAA regulations. 8 years P3 Orion experience desired.

Engine and Propeller Rigging exp desired

Skills: Category Name Required Importance Experience
Areas of Expertise P-3 No 1 4 - 6 Years



Qty 3 positions required
 
Job Number: JEG-2193-1
Job Location: Greenville, SC
Rate: 29/hr max
Duration: 3 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
****MUST be able to obtain a Secret Clearance****

Job Description:
1. The candidate selected must have demonstrated complete understanding and wide application of mass properties technical principles, theories and concepts and possess a general knowledge of other related disciplines and their relationship and impacts on weight, center of gravity, and inertia.
2. The candidate selected will represent the Mass Properties Management and Control organization for various airframe and systems related configuration change studies.
3. The candidate must exhibit the ability to provide imaginative, thorough, and practicable solutions to a wide range of difficult mass properties / weight management and control problems that are consistent with program objectives.
4. The candidate will use ongoing analysis to assure approved changes are fully reflected in aircraft level predictions.
5. The candidate must display an ability to work independently under general direction to meet program objectives.

Basic Qualifications:
1. Experience using a relational database
2. CATIA--Computer Aided Application
3. VAS--Visualization Assembly System
4. Strong SQL use and development skills
5. Strong Visual Basic or C++ use and development skills
6. SAWE RP8 use
7. Earned Value Management Systems (EVMS)
8. Strong technical leadership skills
9. Strong personal and presentation communication
10. Experience with engineering change requests/packages
11. Experience incorporating engineering design changes into a mass properties database system

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11708
Job Location: Fort Worth, TX
Rate: $57.48/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years. The most recent investigation completed within the last 5-years****

Job Description:
1. Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design.
2. Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations.
3. Will support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations.
4. Will work production floor support from receipt of problem, coordination of answer to release of engineering change.
5. Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight.
6. Establishes structural specifications, performs stress analysis, and conducts performance tests.

Education:
- Level 4: BS+16 YRS or MS+14 YRS
- Position will also require 2+ years MRB experience w/ metallic airframe
 
Job Number: 11583
Job Location: Palmdale, CA
Rate: $90.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 3 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer - Clearance CA

Description:
166409 Job Title: Aeronautical Engineer


Work Site Address: Palmdale, CA 93599
Job Number: 2071-1
Max Pay Rate: $80.00/hr
Start Date: 10/8/2019
End Date: 1/20/2020
Position Type: Contract


Job Summary:
Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design.

Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations. Will support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations. Will work production floor support from receipt of problem, coordination of answer to release of engineering change. Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight. Establishes structural specifications, performs stress analysis, and conducts performance tests.

Qualifications and Education Requirements
BS+16 YRS or MS+14 YRS
Position will require 2+ years MRB experience w/ metallic airframe

Qty 1 position
 
Job Number: JE-2071-1S
Job Location: Palmdale, CA
Rate: 80/hr max
Per Diem: pd split possible
Duration: 3 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer / Mass Properties - no clearance TX

Description:
166555 Job Title: Aeronautical Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2226-1
Max Pay Rate: $56.20/hr M
Start Date: 12/2/2019
End Date: 12/31/2020
Position Type: Contract

Job Summary:
The candidate selected will represent the Mass Properties Management and Control organization for various airframe and systems related configuration change studies.

The candidate selected must have demonstrated complete understanding and wide application of mass properties technical principles, theories and concepts and possess a general knowledge of other related disciplines and their relationship and impacts on weight, center of gravity, and inertia.

The candidate must exhibit the ability to provide imaginative, thorough, and practicable solutions to a wide range of difficult mass properties / weight management and control problems that are consistent with program objectives. The candidate will use ongoing analysis to assure approved changes are fully reflected in aircraft level predictions. The candidate must display an ability to work independently under general direction to meet program objectives.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
Experience using a relational database
CATIA--Computer Aided Application
VAS--Visualization Assembly System
Strong SQL use and development skills
Strong Visual Basic or C++ use and development skills
SAWE RP8 use
Earned Value Management Systems (EVMS)
Strong technical leadership skills
Strong personal and presentation communication
Experience with engineering change requests/packages
Experience incorporating engineering design changes into a mass properties database system


Qty 1 position
 
Job Number: JE-2226-1
Job Location: Fort Worth, TX
Rate: 56.20/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Air Data Systems Engineer

Description:
• Develop air data systems design, architecture and support product plan development, including qualification and certification plans
• Provide subject matter expert level technical leadership, mentoring and guidance on both practical and theoretical aspects of air data systems
• Define requirements for the air data systems to ensure compliance with regulations and customer requirements
• Research new air data concepts and technologies that fit the technology roadmap
• Provide validation and verification of air data systems requirements


We're looking for someone who has:
• Bachelor’s Degree in relevant engineering area, with a Master’s degree in a technical and/or management specialty preferred
• 10+ years of deep, hands-on experience in air data and avionics systems development, design and testing in a Military, Commercial, or business aircraft development program
• 8+ years of demonstrated experience specific to air data systems, air data technical principles and technologies, and managing system suppliers as the technical point of contact
• In-depth and current knowledge of Part 25 regulatory requirements, including air data specific certification requirements (e.g. RVSM)
• Experience and expertise in the development of commercial and/or high-end business jets strongly desired, including flight test experience
• Recent experience in developing air data, avionics and other aircraft systems, such as Automatic Flight Control System (AFCS), from concept through certification strongly desired
• Optical air data systems experience desired
• Demonstrated ability to understand & define requirements, generate architecture, and achieve compliance


We want to build a company around people who are:
• Highly self-motivated with a strong bias for action
• Effective at nurturing strong professional relationships
• Committed to fostering a culture of empowerment & creativity

The Structures Company is AA/EOE.
 
Job Number: 324
Job Location: Reno, NV
Rate: OPEN - **DOE**
Per Diem: Yes
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Air Data Systems Engineer (Flight Controls Dept)

Description:
As the Air Data Systems Senior Engineer you will report to the Flight Control Systems IPT Lead and be responsible for all activities related to the air data systems for the jet. In addition to a more traditional Air Data system this aircraft may require development of an optical air data sensing system to enable our Mach Cutoff System (MCS) control concepts.

On any given day you might:
  • Develop air data systems design, architecture and support product plan development, including qualification and certification plans
  • Provide subject matter expert level technical leadership, mentoring and guidance on both practical and theoretical aspects of air data systems
  • Define requirements for the air data systems to ensure compliance with regulations and customer requirements
  • Research new air data concepts and technologies that fit the Aerion technology roadmap
  • Provide validation and verification of air data systems requirements

    We're looking for someone who has:
  • Bachelor’s Degree in relevant engineering area, with a Master’s degree in a technical and/or management specialty preferred
  • 10+ years of deep, hands-on experience in air data and avionics systems development, design and testing in a Military, Commercial, or business aircraft development program
  • 8+ years of demonstrated experience specific to air data systems, air data technical principles and technologies, and managing system suppliers as the technical point of contact
  • In-depth and current knowledge of Part 25 regulatory requirements, including air data specific certification requirements (e.g. RVSM)
  • Experience and expertise in the development of commercial and/or high-end business jets strongly desired, including flight test experience
  • Recent experience in developing air data, avionics and other aircraft systems, such as Automatic Flight Control System (AFCS), from concept through certification strongly desired
  • Optical air data systems experience desired
  • Demonstrated ability to understand & define requirements, generate architecture, and achieve compliance
     
  • Job Number: 42-030
    Job Location: Reno, NV
    Rate: DOE, but very competitive
    Per Diem: YES
    Overtime: Possible
    Duration: 1+ years
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Aircraft Door Design Engineer

    Description:
    General Summary:
    Engineer, Doors Design is responsible for the conceptual design and production engineering of Aircraft Doors structural and system components. The candidate will be responsible for conceptual layout, detailed design and aircraft production & in-service design and modification.

    Duties and Responsibilities:
    1. Generates Engineering Models and Drawings utilizing CATIA Version 5.
    2. Performs trade studies to identify optimal engineering solution.
    3. Collaborates with the Integrated Product Team to resolve cross functional issues.
    4. Reviews work performed by others and ensure work is to the highest standard.
    5. Implements Industry best engineering practices (design for manufacturing, design for reliability and design for maintainability).
    6. Have the ability to understand and apply certification requirements.
    7. Implement design solutions optimized for cost and weight.
    8. Manages task execution to ensure on-time and on-target completion.
    9. Utilizes drafting and Geometrical Dimensioning &Tolerancing knowledge to optimize part design for cost and functionality.
    10. Searches for problem root cause and develop corrective action plans and solutions.
    11. Serves as an interface within the Doors Engineering group to ensure effective communication, coordination, and timely completion of project milestones.
    12. Leads or participates in design / development reviews with management and internal customers. The candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience.

    Education, Work Experience, Certification and/or Licensure:

    1. BS in Mechanical Engineering with a minimum of 10 years directly related experience designing aviation systems; experience can be substituted for the lack of an appropriate degree
    2. Some Travel may be required

    Knowledge, Skills and Abilities:
    1. Proficient in use of CATIA Version 5.
    2. Advanced knowledge of drafting rules.
    3. Advanced knowledge of Geometrical Dimensioning and Tolerancing.
    4. Proficient in Microsoft Office Products.
    5. Use of Team Center.
    6. Familiar with FAR Part 23 or Part 25.
    7. Functional knowledge of SAP.



    The Structures Company is an AA/EOE.
     
    Job Number: 321
    Job Location: NC
    Rate: $60/Hr.
    Per Diem: Yes
    Overtime: Yes
    Duration: 12+ Months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Aircraft Interior Technicians

    Description:
    If rewarding company culture and career growth are terms that pique your professional interests, then you’re going to want to perk up and pay attention to the following…

    STS Mod Center is now hiring Aircraft Interior Technicians to join its award-winning team in Melbourne, Florida.

    These are full time, direct opportunities!

    Qualifications:
    Interiors – must have two/ three years previous experience with Commercial Aircraft MODS/Reconfigurations.
    Will be utilized as needed around the facility for various projects
    Must hold a valid Driver License
    Must not be under a doctor’s care with limited work restrictions
    Must be able to pass a background check and obtain all necessary badging
    Must be willing to work nights, weekends and holidays
    Must be able to ascend/descend ladders, stairs and work stands unassisted
    Must be able to bend, kneel, crawl and stoop frequently in confined spaces
    Must be able to lift up to 75 pounds unassisted
    Must be willing to work in an environment that is subject to changing climate conditions and moderate noise levels
    Must have excellent communication and people skills
    Must be able to exercise good judgment in a Team environment as well as in aircraft maintenance and safety
    Must have problem solving and organizational skills
    Must be able to read and understand Company and Manufacturer Manuals
    Must be able to perform all line maintenance functions un-supervised at any time
    Must own and provide a minimum set of hand tools
    Must be willing to work shift work and will rotate between midnights and days
    Benefits:
    STS Mod Center offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

    We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-800-359-4787.

    Thanks for taking the time, and we look forward to hearing from you soon.
     
    Job Number: 49624
    Job Location: Melbourne, FL
    Input Date: 11/14/2020
    Firm Name: STS AEROSTAFF SERVICES
    Attention: STS Technical Services
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 877/707-5767
    Fax Phone: 877/707-5767
    Website: www.stsaviationgroup.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Interior Design Engineer - Solidworks

    Description:
    POSITION SUMMARY:
    Provides all levels of engineering drawings related to interior cabin furnishing and components in support of VIP aircraft completions. Mentors other engineers on department techniques and processes. Must have aircraft interiors completions experience and experience designing monuments, galleys, credenzas, closets, beds, tables, etc.



    ESSENTIAL JOB FUNCTIONS:
    1. Develops advanced level design data packages for interior cabin furnishing in support of VIP aircraft completions.
    2. Utilizes airworthiness requirements and the project specification to create drawings.
    3. Creates and reviews engineering drawings, specifications, service bulletins, reports, etc.
    4. Performs research and design relating to the production of engineering drawings necessary for installation and completion of custom aircraft interiors.
    5. Prepares advanced level interior cabin furnishings reports, Engineering Authorizations (EA’s), drawings, and EO’s.
    6. Develops advanced level interior cabin furnishings modifications and installation work instructions, procedures and recommendations.
    7. Mentor and train less experienced engineers within department to increase overall efficiency of department.
    8. Identifies discrepancies and/or problems with drawings before releasing to production and implements correction action to ensure the timely release.
    9. Provides advanced level technical support and engineering disposition in order to resolve aircraft engineering/interior cabin furnishing problems.
    10. Using company procedures, applies engineering knowledge to resolve complex issues.
    11. Maintains advanced level awareness of FAA regulations and required compliance of FARs, ADs, SBs.
    12. Actively works to improve daily processes, and ensures all work meets completion aircraft requirements.
    13. Performs other duties as assigned.


    MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
    1. Bachelor’s Degree in Mechanical or Structural Aerospace Engineering or comparable.
    2. 2-5 years’ experience in Furnishings, Design or Structural Engineering.
    3. Familiarity with the Supplemental Type Certificate (STC) process

    REQUIRED SKILLS AND ABILITIES:
    1. Proficient with Microsoft Word, Excel, PowerPoint, Outlook, and Internet Explorer.
    2. Knowledge of Federal Aviation Regulations (FARs) governing aircraft certification Preferred.
    3. Ability to read, write, speak, and understand the English language.
    4. Computer Aided Drafting/Design - SolidWorks required
    5. Aviation background and electrical systems experience required.
    6. Strong knowledge of industry mechanical systems and documentation standards.
    7. Experience with electrical systems and components.
    8. Strong communication and problem-solving skills.
    9. Strong time-management and organizational skills.





    The Structures Company is an AA/EOE.
     
    Job Number: 339
    Job Location: Indianapolis, IN
    Rate: $50-57/Hr. **DOE**
    Per Diem: Yes
    Duration: 12+ Months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Aircraft Maintenance Production Managers

    Description:
    STS Mod Center is hiring Aircraft Maintenance Production Managers in Melbourne, Florida.

    Qualifications:
    Must have minimum 5 years management experience.
    Must hold a valid Driver License.
    Must not be under a doctor’s care with limited work restrictions.
    Must be able to pass a back ground check and obtain all necessary badging.
    Must be able to ascend/descend ladders, stairs and work stands unassisted.
    Must be able to bend, kneel, crawl and stoop frequently in confined spaces.
    Must be able to lift up to 75 pounds unassisted.
    Must be willing to work in an environment that is subject to changing climate conditions and moderate noise levels.
    Must have excellent communication and people skills.
    Must be able to exercise good judgment in a team environment as well as in aircraft maintenance and safety.
    Must have problem solving and organizational skills. Must be able to read and understand company and manufacturer Manuals.
    Must be able to perform all line maintenance functions un-supervised at any time.
    Must own and provide a minimum set of hand tools
    Benefits:
    STS Mod Center offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

    We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-800-359-4787.

    Thanks for taking the time, and we look forward to hearing from you soon.
     
    Job Number: 49788
    Job Location: Melbourne, FL
    Input Date: 11/14/2020
    Firm Name: STS AEROSTAFF SERVICES
    Attention: STS Technical Services
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 877/707-5767
    Fax Phone: 877/707-5767
    Website: www.stsaviationgroup.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Aircraft Painter - no clearance SC

    Description:
    166698
    Job Title: Aircraft Painter

    Work Site Address: Greenville, SC 29605
    Job Number: 2516-1
    Max Pay Rate: $29.00/hr
    Start Date: 11/4/2019
    End Date: 6/29/2020
    Position Type: Contract

    Job Summary:
    Coats surfaces of aircraft with paint, Polyurethane, lacquer, epoxy, resin or other material, using brushes, rollers, spray guns and other devices, removes old paint from aircraft, using liquid paint remover and scraper.

    Smoothes surface with sandpaper and steel wool, roughens aluminum surfaces with acid solution and steel wool to insure that paint adheres to surface, masks and covers portions of surfaces not to be painted, and applies markings to include minor and major markings using stencil materials, insignia, letters, or numerals, on aircraft surface, using stencils.

    Qualifications and Education Requirements
    Ability to operate snorkel and scissor lifts.

    Preferred Skills
    Skills: Category Name Required Importance Experience
    Areas of Expertise Paint Process No 1 2 - 4 Years

    Qty 2 positions
    Manager asked to please inform candidates that the LM facility closes for Christmas break.
     
    Job Number: JEG-2516-1
    Job Location: Greenville, SC
    Rate: 29/hr max
    Duration: 8 months
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Aircraft Sheet Metal Mechanics

    Description:
    STS Mod Center is now hiring Aircraft Sheet Metal Mechanics to join its award-winning team in Melbourne, Florida.

    Qualifications:
    Sheet Metal techs with a minimum of 3 years previous Modification, and Heavy Structures repairs on Large Regional and Large Commercial aircraft.
    A&P License is strongly preferred but not required.
    Benefits:
    STS Mod Center offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

    We know it takes great people to do great work, so if you’re interested in joining the STS Mod Center family, we encourage you to apply on this page. Have questions? Give us a call at 1-800-359-4787.

    Thanks for taking the time, and we look forward to hearing from you soon.
     
    Job Number: 48783
    Job Location: Melbourne, FL
    Input Date: 11/14/2020
    Firm Name: STS AEROSTAFF SERVICES
    Attention: STS Technical Services
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 877/707-5767
    Fax Phone: 877/707-5767
    Website: www.stsaviationgroup.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Aircraft Stress Engineer Openings

    Description:
    Aircraft Stress Engineers needed.
    MUST BE US PERSONS.
    BS Degree a MUST.
    FEMAP is a plus but not required.
    Strong classical analysis/hand calcs a MUST.

    REQUIRED SKILLS AND ABILITIES:
    1. Familiarity with Federal Aviation Regulations (FARs) governing aircraft certification.
    2. Strong understanding of aircraft structural modifications (both interior and airframe).
    3. Strong command of classical hand-analysis techniques.
    4. Proficient with the following software:
    a. Microsoft Word, Excel, PowerPoint, Outlook, and Internet Explorer.
    b. NASTRAN/FEMAP(basic user skill, proficiency a plus)
    c. AutoCAD (basic user skill, proficiency a plus)
    d. SolidWorks (basic user skill, proficiency a plus)
    e. Visual Basic or other coding skills a plus
    Final 1-2017
    5. Strong knowledge of Finite Element Modeling and Analysis techniques.
    6. Ability to interpret design drawings of various aircraft modifications and identify design changes required to
    ensure that sound load paths and structural integrity are maintained.

    MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
    1. Bachelor’s Degree in Aerospace, Aeronautical, or Mechanical Engineering or the equivalent.
    2. Five (5) or more years of experience working in aircraft stress analysis - airframe or interiors/completions on transport category aircraft, installation designs, including but not limited to Supplemental Type Certificate (STC) work, structural
    substantiation analysis and report development, aircraft modification designs under 14 CFR Part 25 STC
    projects, and test plans and test report authoring and review.

    The Structures Company LLC is an AA/EOE.
     
    Job Location: IN
    Rate: Open / DOE
    Per Diem: Yes
    Overtime: Yes
    Duration: Long-term
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Chris Sheets
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    Aircraft Stress Engineers

    Description:
    Nastran, Patran a plus
     
    Job Location: GA/WI
    Input Date: 11/23/2020
    Firm Name: ADVANCED TECHNOLOGY
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Email: sclark@advancedtechno.com
    Website: www.advancedtechno.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Avionic Technician - no clearance URGENT SC

    Description:
    166688 Job Title: Avionic Technician

    Work Site Address: Greenville, SC 29605
    Job Number: 2464-1
    Max Pay Rate: $29.50/hr
    Start Date: 11/18/2019
    End Date: 7/31/2020
    Position Type: Contract

    Job Summary:
    Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, engineering drawings and written or verbal instructions.

    Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions.

    Skills: Category Name Required Importance Experience
    Areas of Expertise Aircraft Modification No 1 2 - 4 Years
    Areas of Expertise C-130H No 1 2 - 4 Years

    Qty 8 positions
    This is an URGENT request.
     
    Job Number: JEG-2464-1
    Job Location: Greenville, SC
    Rate: 29.50/hr max
    Duration: 8 months plus extension
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Avionic Technician / C-130 - no clearance URGENT URGENT URGENT SC

    Description:
    166338 Job Title: Avionic Technician

    Work Site Address: Greenville, SC 29605
    Job Number: 2095-1
    Max Pay Rate: $29.00/hr
    Start Date: 10/7/2019
    End Date: 1/31/2020
    Position Type: Contract

    HIRING MANAGER WILL CONSIDER ANY CANDIDATE WITH ANY C-130 EXPERIENCE

    Job Description:
    Performs operational checks, troubleshoot and repair electrical and avionics systems in a quality manner and ensure the integrity and correct operation of affected avionics/ electrical systems affected during modification and maintenance of aircraft. Essential Functions (Other duties may be assigned as required)
    • Reads and interprets engineering drawings, technical manuals, wiring diagrams understanding symbols flags and general notes.
    • Performs operational checks and troubleshoots essential navigation and communication systems such as RADAR, TACAN, ADF, UHF, VHF, HF, VOR/ILS and systems such as aircraft fuel, aircraft hydraulic, aircraft lighting, aircraft landing gear, aircraft ordnance, engine fuel, engine oil, engine propeller and the entire electrical power distribution.
    • Works with several types of measuring devices and test equipment required for operational/functional checks and troubleshooting of aircraft electrical and avionics systems.
    • Experienced in troubleshooting and flight line operations a must

    HIRING MANAGER WILL CONSIDER ANY CANDIDATE WITH ANY C-130 EXPERIENCE



    Qualifications and Education Requirements
    Needs to be really experienced in troubleshooting and flight line operations

    Preferred Skills
    Skills: Category Name Required Importance Experience
    Areas of Expertise C-130J Yes 1 4 - 6 Years
    Areas of Expertise Electrical Troubleshooting No 2 4 - 6 Years

    Qty 1 position needed
     
    Job Number: JEG-2095-1
    Job Location: Greenville, SC
    Rate: 29/hr max
    Duration: 3 -18 months
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Avionic Technician / C-130 desired - no clearance SC

    Description:
    165856/1895-1
    Avionic Technician
    Greenville, SC 29605
    29/hr max

    Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, engineering drawings and written or verbal instructions. Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions. Installs wire harnesses in aircraft to include routing and termination.

    Areas of Expertise C-130 No 1 4 - 6 Years

    Qty 5 positions needed
    Candidate must have previous aircraft modification experience. Installs wire harnesses in aircraft to include routing and termination.
     
    Job Number: JEG-1895-1
    Job Location: Greenville, SC
    Rate: 29/hr max
    Duration: 6 months +
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    Avionics & Electrical Design Engineers

    Description:
    SolidWorks aircraft electrical and avionics upgrades

    Immediate needs - email a resume and call our national recruiters
     
    Job Location: Nationwide
    Input Date: 11/23/2020
    Firm Name: ADDITIONAL CONTRACT SERVICES
    Address: 85 RANGEWAY RD BLDG 1 STE 2
    City, State: NORTH BILLERICA, MA 01862
    800 Phone: 800/661-8272
    Email: acs@acsnatl.com
    Website: www.acsnatl.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Avionics Engineer

    Description:
    ****Candidate can start without a Secret Clearance, but must be able to obtain a Secret Clearance ****

    Job Description:
    1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
    2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

    Basic Qualifications:
    1. Bachelor's degree in Aerospace Engineering, System Engineering, Computer Science, Electrical Engineering, Mechanical Engineering or related technical degree.
    2. Experience working electro-optic (EO) systems.

    Desired Skills:
    1. Active F-22 Project Clearance desired.
    2. The selected candidate will be assigned to the F-16/F-22 Integrated Fighter Group's (IFG) Sensors & Weapons team supporting the integration of electro-optic (EO) systems--including targeting, reconnaissance, and terrain-following pods--on F-16 aircraft.
    3. The candidate will assist in the development, integration, and testing of said systems as well as develop test procedures and document interfaces.
    4. The selected candidate will interface and coordinate with suppliers, program management, and other subsystem engineers to support program cost, schedule, quality, technical goals, and requirements.
    5. The selected candidate will also participate in solving technical problems, subcontract planning, and risk management.

    Education:
    1. Level 1: BS+0-3 YRS
     
    Job Number: 11703
    Job Location: Fort Worth, TX
    Rate: $67.21/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 15 mos
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Avionics Engineer

    Description:
    ****MUST have an Active Secret Clearance or to have had one within the last 2 years****

    Job Description:
    1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
    2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

    Job Qualifications:
    1. Bachelor's degree in technical discipline
    2. Experience with Aircraft Avionics systems

    Desired Skills:
    1. Active F-22 Projects Clearance
    2. Experience presenting
    3. Experience with customer interaction
    4. Experience with AGILE
    5. Diligent at maintaining relevant members apprised of task status
    6. Experience with Microsoft Office tools (i.e. Excel, Outlook, and PowerPoint)

    Education:
    1. Level 1: BS+0-3 YRS
     
    Job Number: 11705
    Job Location: Fort Worth, TX
    Rate: $67.21/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 15 mos
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Avionics Engineer

    Description:
    ****MUST have an Active Secret Clearance or to have had one within the last 2 years****

    Job Description:
    1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
    2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

    Job Qualifications:
    1. Bachelors degree from an accredited college in a related discipline, or equivalent experience/combined education.
    Experience with aircraft systems

    Desired Skills:
    1. Experienced in design, development, integration and test of datalink systems.
    2. Familiar with DoD contracting and product acquisition.

    Education:
    1. Level 1: BS+0-3 YRS
     
    Job Number: 11681
    Job Location: Fort Worth, TX
    Rate: $60.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 15 mos
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Avionics Engineer

    Description:
    ****MUST have an Active Secret Clearance or to have had one within the last 2 years****

    Job Description:
    1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
    2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

    Job Qualifications:
    1. Experience with Aircraft Avionics systems and/or the F-16 datalink systems (i.e., IDM, Link 16, MIDS).
    2. Familiarity with Avionics systems, Vehicle systems & the systems supporting integration & test and debug.
    3. Experience with the verification and sell off of a subsystem to a customer through formal test events.
    4. Experience developing subsystem design/engineering documentation.
    5. Experience with Agile Software Development and/or SCRUM processes.
    6. Strong oral written communication skills
    7. Strong interpersonal and collaboration skills
    8. Strong work ethic and self-motivation
    9. Strong Interpersonal & Collaboration Skills
    10. Proficient with MS Office products including Excel spreadsheet, scheduling and Database applications; excellent oral and written communication skills and analytical skills.
    11. Needs to have the ability to convey technical data and concepts in concise messages and presentations.

    Education:
    1. Level 2: BS+4-8 YRS or MS+2-6 YRS
     
    Job Number: 11680
    Job Location: Fort Worth, TX
    Rate: $70.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 15 mos
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Avionics Engineer

    Description:
    ****MUST have an Active Secret Clearance or to have had one within the last 2 years****

    Job Description:
    1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
    2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

    Basic Qualifications:
    1. BS Electrical, Computer Engineering or related technical degree from an accredited college.
    2. Familiarity with Aircraft Avionics systems and the F-22 communication subsystem
    3. Open System Architecture (OSA) hardware experience
    4. Knowledge of Commercial off the shelf (COTS) hardware and implementation

    Desired Skills:
    1. Active F-22 Project Clearances
    2. Familiarity with F-22 Avionics systems, F-22 Vehicle systems and the systems supporting integration and test.
    3. System performance monitoring and evaluation experience.
    4. Electrical troubleshooting skills.
    5. Experience with Test and Measurement Equipment
    6. Scaled Agile Framework methodology
    7. Software development experience
    8. Proficient with Microsoft Office products including Excel spreadsheet, scheduling and Database applications;
    9. Excellent oral and written communication skills and analytical skills.
    10. Needs to have the ability to convey technical data and concepts in concise messages and presentations.
    11. Technical leadership skills a plus

    Education:
    1. Level 2: BS+4-8 YRS or MS+2-6 YRS
     
    Job Number: 11626
    Job Location: Fort Worth, TX
    Rate: $63.67/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 15 mos
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Avionics Engineer

    Description:
    ****MUST have an Active Secret Clearance or to have had one within the last 2 years****

    Job Description:
    1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
    2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

    Basic Qualifications:
    1. Bachelors degree in Software/Electrical/Electronic Engineering or related technical degree.
    2. Experience with developing and delivering software

    Desired Skills:
    1. Experience with fixed wing aircraft datalink and
    Communication/Navigation/Identifications systems.
    2. Program management experience including; planning, scheduling, EVMS, risk management, configuration management and problem resolution
    3. An understanding of the build, integration, and test processes
    4. The ability to build and maintain effective working - relationships with customers, suppliers, peers and partners.

    Education:
    1. Level 2: BS+4-8 YRS or MS+2-6 YRS
     
    Job Number: 11627
    Job Location: Fort Worth, TX
    Rate: $63.67/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 15 mos
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Avionics Engineer

    Description:
    ****MUST have an Active Secret Clearance or to have had one within the last 2 years****

    Job Description:
    1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
    2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

    Basic Qualifications:
    1. BS in technical discipline and at least one year professional experience
    2. Familiarity with Aircraft Avionics systems and/or Mission Systems subsystem

    Desired Skills:
    1. Knowledge of RF, EW and/or CNI
    2. Ability to understand and apply electronics engineering principles to development
    3. Experience developing subsystem design/engineering documentation.
    4. A working knowledge of tools for requirements and verification Traceability.
    5. Experience with Agile Methodology
    6. Ability to work with suppliers to generate verification and validation plans
    7. Strong oral written communication skills
    8. Strong interpersonal and collaboration skills
    9. Strong work ethic and self-motivation

    Education:
    1. Level 1: BS+0-3 YRS
     
    Job Number: 11625
    Job Location: Fort Worth, TX
    Rate: $67.21/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 15 mos
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Avionics Engineer

    Description:
    ****MUST have an Active Secret Clearance or to have had one within the last 2 years****

    Job Description:
    1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
    2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

    Basic Qualifications:
    1. Experience in Electronic Warfare operations, implementation, or aircraft integration

    Desired Skills:
    1. MATLAB and/or C++ for analysis tool development
    2. Familiarity with JSF avionics suite and systems engineering processes.
    3. Familiarity with data analysis tools (e.g. Matlab)
    4. Familiarity with JSF tools including SIMS and Dimensions
    5. Familiarity with the F-35 Mission Systems design of Radar, Electronic Warfare / Countermeasures, and Fusion.
    6. Microsoft Office products including Excel spreadsheet, scheduling and Database applications experience
    7. Good oral and written communication skills and have the ability to convey technical data in concise messages and presentations.

    Education:
    1. Level 2: BS+4-8 YRS or MS+2-6 YRS
     
    Job Number: 11628
    Job Location: Fort Worth, TX
    Rate: $63.67/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 15 mos
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Avionics Engineer

    Description:
    ****MUST have an Active Secret Clearance or to have had one within the last 2 years****

    Job Description:
    1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
    2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

    Basic Qualifications:
    1. Bachelor's degree in a related technical field
    2. Experience with mission systems/avionics

    Desired Skills:
    1. Knowledge of integrated CNI systems (e.g., F-35 or F-22), INS, and/or GPS concepts, operations, implementation, aircraft integration, and usage.
    2. Knowledge of CNI functions (voice radios, data links, Link 16, TACAN, IFF, crypto).
    3. Experience in RF and/or CNI systems, Integration & Test, flight test, data analysis.
    4. Prior supplier management experiences a plus.
    5. Familiarity with JSF toolsets: SIMS & PDM.
    6. Current F-35 program experience and clearances.
    7. Must be able to acquire a SAR clearance.
    8. CNI, Radar, EW, or related avionics functions technology, and product development experience.
    9. Must be able to travel a moderate amount domestically to subcontractor and US government facilities in support of subsystem development and test.

    Education:
    1. Level 2: BS+4-8 YRS or MS+2-6 YRS
     
    Job Number: 11623
    Job Location: Fort Worth, TX
    Rate: $63.67/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 15 mos
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Avionics Engineer / F-16 datalink systems / integration test- Clearance TX

    Description:
    166533 Job Title: Avionics Engineer

    Work Site Address: Fort Worth, TX 76108
    Job Number: 2183-1
    Max Pay Rate: $70.00/hr
    Start Date: 10/22/2019
    End Date: 1/22/2021
    Position Type: Contract

    Job Summary:
    Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.

    Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

    Qualifications and Education Requirements
    BS+4-8 YRS or MS+2-6 YRS
    Exp w/ Aircraft Avionics systems and/or the F-16 datalink systems (i.e., IDM, Link 16, MIDS).
    Familiarity with Avionics systems, Vehicle systems & the systems supporting integration & test and debug.
    Experience with the verification and sell off of a subsystem to a customer through formal test events.
    Experience developing subsystem design/engineering documentation.
    Experience with Agile Software Development and/or SCRUM processes.
    Strong oral written communication skills
    Strong interpersonal and collaboration skills
    Strong work ethic and self-motivation
    Strong Interpersonal & Collaboration Skills
    Proficient with MS Office products including Excel spreadsheet, scheduling and Database applications
    Excellent oral and written communication skills and analytical skills.
    Needs to have the ability to convey technical data and concepts in concise messages and presentations.


    Qty 1 position
     
    Job Number: JE-2183-1S
    Job Location: Fort Worth, TX
    Rate: 70/hr max
    Per Diem: pd split possible
    Duration: 15 months
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Avionics Engineer - Clearance TX

    Description:
    166417
    Job Title: Avionics Engineer

    Work Site Address: Fort Worth, TX 76108
    Job Number: 2147-1
    Max Pay Rate: $65.00/hr
    Start Date: 10/15/2019
    End Date: 1/15/2021
    Position Type: Contract

    Job Summary:
    Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
    Job Description: Should NOT include client name, rates or security clearance requirements. What is provided here WILL be on the Job Board
    Roles and Responsibilities
    Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

    Qualifications and Education Requirements
    BS+0-3 YRS
    Basic Qualifications
    BS in technical discipline and at least one year professional experience
    Familiarity with Aircraft Avionics systems and/or Mission Systems subsystem

    Desired skills
    Knowledge of RF, EW and/or CNI
    Ability to understand and apply electronics engineering principles to development
    Experience developing subsystem design/engineering documentation.
    A working knowledge of tools for requirements and verification Traceability.
    Experience with Agile Methodology
    Ability to work with suppliers to generate verification and validation plans
    Strong oral written communication skills
    Strong interpersonal and collaboration skills
    Strong work ethic and self-motivation

    Qty 1 position
     
    Job Number: JE-2147-1S
    Job Location: Fort Worth, TX
    Rate: 65/hr max
    Per Diem: pd split possible
    Duration: 15 months
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Avionics Engineer / avionics flight control systems - Clearance TX

    Description:
    166422
    Job Title: Avionics Engineer

    Work Site Address: Fort Worth, TX 76108
    Job Number: 2146-1
    Max Pay Rate: $62.00/hr
    Start Date: 10/15/2019
    End Date: 1/15/2021
    Position Type: Contract

    Job Summary:
    Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.

    Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

    Qualifications and Education Requirements
    BS+4-8 YRS or MS+2-6 YRS
    Basic Qualifications
    - Bachelors degree in Software/Electrical/Electronics Engineering or related technical degree.
    - Experience with developing and delivering software
    Desired skills
    - Experience with fixed wing aircraft datalink and
    Communication/Navigation/Identifications systems.
    - Program management experience including; planning, scheduling, EVMS, risk management, configuration management and problem resolution
    - An understanding of the build, integration, and test processes
    - The ability to build and maintain effective working - relationships with customers, suppliers, peers and partners.

    Qty 1 position
     
    Job Number: JE-2146-1S
    Job Location: Fort Worth, TX
    Rate: 62/hr
    Per Diem: pd split possible
    Duration: 15 months
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Avionics Engineer - Clearance TX

    Description:
    166418
    Job Title: Avionics Engineer

    Work Site Address: Fort Worth, TX 76108
    Job Number: 2148-1
    Max Pay Rate: $62.00/hr
    Start Date: 10/15/2019
    End Date: 1/15/2021
    Position Type: Contract

    Job Summary:
    Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.

    Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

    Qualifications and Education Requirements
    BS+4-8 YRS or MS+2-6 YRS
    BS Electrical, Computer Engineering or related technical degree from an accredited college.

    Basic Qualifications
    BS Electrical, Computer Engineering or related technical degree from an accredited college.
    Familiarity with Aircraft Avionics systems and the F-22 communication subsystem
    Open System Architecture (OSA) hardware experience
    Knowledge of Commercial off the shelf (COTS) hardware and implementation

    Desired skills
    Active F-22 Project Clearances
    Familiarity with F-22 Avionics systems, F-22 Vehicle systems and the systems supporting integration and test.
    System performance monitoring and evaluation experience.
    Electrical troubleshooting skills.
    Experience with Test and Measurement Equipment
    Scaled Agile Framework methodology
    Software development experience
    Proficient with Microsoft Office products including Excel spreadsheet, scheduling and Database applications;
    Excellent oral and written communication skills and analytical skills.
    Needs to have the ability to convey technical data and concepts in concise messages and presentations.
    Technical leadership skills a plus

    Qty 1 position
     
    Job Number: JE-2148-1S
    Job Location: Fort Worth, TX
    Rate: 62/hr
    Per Diem: pd split possible
    Duration: 15 months
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Avionics Engineer - Clearance TX

    Description:
    166415
    Job Title: Avionics Engineer

    Work Site Address: Fort Worth, TX 76108
    Job Number: 2084-1
    Max Pay Rate: $62.26/hr
    Start Date: 11/5/2019
    End Date: 2/5/2021
    Position Type: Contract

    Job Summary:
    Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.

    Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

    Qualifications and Education Requirements
    BS+4-8 YRS or MS+2-6 YRS

    CNI, Radar, EW, or related avionics functions technology, and product development experience.
    Must be able to travel a moderate amount domestically to subcontractor and US government facilities in support of subsystem development and test.

    Basic Qualifications
    Bachelor's degree in a related technical field
    Experience with mission systems/avionics

    Desired skills
    Knowledge of integrated CNI systems (e.g., F-35 or F-22), INS, and/or GPS concepts, operations, implementation, aircraft integration, and usage.
    Knowledge of CNI functions (voice radios, data links, Link 16, TACAN, IFF, crypto).
    Experience in RF and/or CNI systems, Integration & Test, flight test, data analysis.
    Prior supplier management experience a plus.
    Familiarity with JSF toolsets: SIMS & PDM.
    Current F-35 program experience and clearances.

    Qty 2 positions
     
    Job Number: JE-2084-1S
    Job Location: Fort Worth, TX
    Rate: 62/hr max
    Per Diem: pd split possible
    Duration: 15 months
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Avionics Engineer - Clearance TX

    Description:
    166435
    Job Title: Avionics Engineer

    Work Site Address: Fort Worth, TX 76108
    Job Number: 2137-1
    Max Pay Rate: $62.00/hr
    Start Date: 10/15/2019
    End Date: 1/15/2021
    Position Type: Contract


    Job Summary:
    Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.

    Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

    Qualifications and Education Requirements
    BS+9-15 YRS or MS+7-13 YRS
    Basic Qualifications
    • Experience in Electronic Warfare operations, implementation, or aircraft integration

    Desired skills
    • MATLAB and/or C++ for analysis tool development
    • Familiarity with JSF avionics suite and systems engineering processes.
    • Familiarity with data analysis tools (e.g. Matlab)
    • Familiarity with JSF tools including SIMS and Dimensions
    • Familiarity with the F-35 Mission Systems design of Radar, Electronic Warfare / Countermeasures, and Fusion.
    • Microsoft Office products including Excel spreadsheet, scheduling and Database applications experience
    • Good oral and written communication skills and have the ability to convey technical data in concise messages and presentations

    Preferred Skills
    Skills: Category Name Required Importance Experience
    Software Skills C++ No 1
    Software Skills Matlab No 1


    Qty 2 positions
     
    Job Number: JE-2137-1S
    Job Location: Fort Worth, TX
    Rate: 62/hr max
    Per Diem: pd split possible
    Duration: 15 months
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Avionics Systems Engineer

    Description:
    The Avionics Engineer will be responsible for the design, development, and integration of the assigned avionic systems for the HondaJet aircraft.

    Duties and Responsibilities:
    1. Define, plan, and develop complex systems level requirements to support the avionic systems for the HondaJet aircraft.
    2. Perform systems level integration activities for aircraft avionic systems including: Control and Display Systems; Navigations Systems; Communication Systems; Surveillance Systems; and Cabin Management Systems
    3. Interface with suppliers to ensure technical requirements are met to support aircraft development need dates.
    4. Provide technical assistance to production and customer service departments for support of system technical inquires and issue resolution.
    5. Perform system evaluation and analysis to verify the system design compliance with functional requirements.
    6. Coordinate with cross-functional team members to complete assignments/projects as defined and on schedule.
    7. Develop targeted system level enhancements to address customer feedback and product improvement initiatives.
    8. Conduct system lab testing and aircraft functional testing.
    9. Prepare presentations on avionics system design/development status.
    10. Support system analyses for avionic systems.

    Education, Work Experience, Certification and/or Licensure:
    1. Bachelors’ degree in Engineering from a four year college or university; preferably in Electrical/Electronic Engineering.
    2. Minimum of 6 years’ experience working with integrated aircraft avionic systems in the areas of design engineering, system analysis, and system test.

    Knowledge, Skills and Abilities:
    1. Working knowledge of design requirements of 14CFRPart 23.
    2. Proficiency in writing technical documentation and reports involving test data and analysis.
    3. Familiarity with avionics/electrical test laboratories and lab equipment.
    4. Working knowledge of System qualification requirements including DO-160E/F for environmental, DO-178B for software, and DO-254 for complex electronic hardware.
    5. Proficiency in Microsoft Office suite (Word, Excel, Project, PowerPoint is required.
    6. Proficiency in requirements management tools such as DOORS
    7. Proficiency in PLM Tools such as TeamCenter and SAP.
    8. Ability to handle complex work assignments.
    9. Ability to work independently and within a multi-functional team environment.
     
    Job Number: 28-006
    Job Location: Greensboro, NC
    Rate: $55 - $65/hr
    Per Diem: Yes
    Overtime: Possible
    Duration: 1+ years
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Avionics Technicians

    Description:
    STS Mod Center is hiring Avionics Technicians in Melbourne, Florida.

    Qualifications:
    Must have a minimum of three (3) years experience performing modifications, installations and troubleshooting large regional and commercial aircraft
    A valid FAA Aircraft & Powerplant license is preferred but not required
    Must hold a valid Driver License.
    Must not be under a doctor’s care with limited work restrictions.
    Must be able to pass a back ground check and obtain all necessary badging.
    Must be able to ascend/descend ladders, stairs and work stands unassisted.
    Must be able to bend, kneel, crawl and stoop frequently in confined spaces.
    Must be able to lift up to 75 pounds unassisted.
    Must be willing to work in an environment that is subject to changing climate conditions and moderate noise levels.
    Must have excellent communication and people skills.
    Must be able to exercise good judgment in a team environment as well as in aircraft maintenance and safety.
    Must have problem solving and organizational skills. Must be able to read and understand company and manufacturer Manuals.
    Must be able to perform all line maintenance functions un-supervised at any time.
    Must own and provide a minimum set of hand tools
    Benefits:
    STS Mod Center offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

    We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-800-359-4787.

    Thanks for taking the time, and we look forward to hearing from you soon.
     
    Job Number: 47878
    Job Location: Melbourne, FL
    Input Date: 11/14/2020
    Firm Name: STS AEROSTAFF SERVICES
    Attention: STS Technical Services
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 877/707-5767
    Fax Phone: 877/707-5767
    Website: www.stsaviationgroup.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Composite Structural Design Engineer Openings

    Description:
    Design and configuration of composite primary aircraft structure.
    Experience during preliminary/conceptual design phase required.
    Support of subsystems integration and packaging into primary structure.
    Strong knowledge and understanding of latest structural design, as well as manufacturing trends in the Aerospace industry.
    Analyze the applicability of new and emerging technologies and advanced techniques.
    Serve as a design focal between the program and Tier 1 suppliers.
    Provide technical support in design and development of the preliminary structures layout that meets weight, cost, manufacture-ability and certification requirements.
    Support new business development, trade studies and proposal activities.
    Support technical review of supplier capabilities and progress.

    Requirements:
    Must be a US or Canadian citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772.
    Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure / confidentiality agreement with current or any former employer that would prevent you from fully performing the duties of the position.
    Must have a bachelor’s degree in Aerospace or Mechanical Engineering, or similarly related area.
    8+ years of experience in performing design of large aerospace structures.
    Strong composite structural design background.
    Proficiency with CATIA V5 and Teamcenter PLM is preferred.
    Knowledge of the conceptual and preliminary design phases of aircraft development is strongly preferred.
    Thorough understanding of the structural design requirements for Part 25 certification is preferred.
    Highly self-motivated with a strong bias for action, and excellent problem-solving skills across multi-disciplinary skill sets.

    The Structures Company, LLC is an AA/EOE.
     
    Job Location: Reno, NV
    Rate: Open
    Per Diem: Yes
    Overtime: Possible
    Duration: Long-term
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Chris Sheets
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Composite Technician (20+ openings)

    Description:
    Job Description
    Come work for a great company with great benefits! We need guys for all shifts (weekends, nights, days, holidays). Six to eight-month contract with the potential of converting to a permanent employee. Aerospace experience preferred.
    Composites fabrication & sub-assembly:
    • Fabrication of parts using wet layup and pre-impregnated composite materials
    • Knowledge of properly preparing tooling for layup (Clean, seal, release)
    • Placement and consolidation of composite materials in tooling
    • Grinding, cutting, and trimming of parts
    • Working knowledge of composite specific equipment including ovens, Gerber cutting machines, and Virtek laser computers.
    • Bonding composite structures
    • Hand-finishing parts to proper fitment
    • Wet layup with multiple resin systems and fabrics
    • Locating parts and creating fixtures to blueprints and / or engineering instructions
    • Attention to detail and ability to self-inspect work to ensure quality defects are mitigated
    Required:
    • 3+ years of experience with composites or aircraft fabrication and assembly preferred.
    • Flexible to work overtime/modified/Non-standard shifts preferred
    • 5S/FOD/Tool control programs mandatory
    • Ability to perform repairs on composite structures
    • Experienced with quality inspection points and process documentation.
    • Knowledge of resins, mixing, ratios, and paste mixes.
    Physical Requirements
    • Must be able to stand for extended periods – 8 hours min.
    • Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces.
    • Physically able to handle items weighing up to 40lbs (unassisted).
    • Working in confined spaces
    • Working on Elevated Platforms
    Job Type: Full-time
    Salary: $16.00 to $45.00 /hour
     
    Job Location: Mojave, CA
    Rate: 16-40/hr
    Per Diem: Yes
    Overtime: Possible
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Tara Gilbert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Design Engineer ( Clearfield, Utah ) S9271212

    Description:
    Design Engineer ( Clearfield, Utah ) S9271212
    12 month Contract

    Pay Rate:$70-80/hr W2

    Active Secret Clearance Required

    Composite Structural Design Engineer experienced in designing composite structures and assemblies for military and/or commercial aircraft with assembly level design including establishment of data schemes and tolerance analysis.

    Experience is design of laminates, sandwich structures, and bonded and bolted assemblies

    Top three skills:
    Must have an active clearance with an investigation within the last 4.5 years
    BS in Engineering with a minimum of 10 years related experience in design engineering function
    Minimum of 6 years of experience with Siemens NX or Catia V5 for component and assembly design
     
    Job Number: S9271212
    Job Location: Clearfield, UT
    Rate: Open
    Per Diem: no
    Overtime: yes
    Duration: 12 months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: TALENTPRO CONSULTING
    Attention: Tim
    Address: 402 N B ST
    City, State: FAIRFIELD, IA 52556
    Phone: 641/209-3000 X201
    Fax Phone: 641/209-3001
    Website: www.talentproconsulting.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Design and Analysis Engineer

    Description:
    Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

    We are currently searching for the right talent to fill this opportunity:

    Design and Analysis Engineer
    (U.S. Citizenship Required*)
    Oklahoma City, OK
    2019-10166
    Responsibilities:
    • Lead work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects.
    • Lead analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications.
    • Lead testing and validation work on complex system designs to assure that operational and functional requirements are met.
    • Work with other to develop program test strategies.
    • Manage performance of critical suppliers to ensure system integration and compliance with requirements.
    • Conduct program independent reviews and reports results to program leadership.
    • Provide critical support of fielded hardware and software over the entire product lifecycle.
    • Lead research into technology advances for potential application to company business needs.
    • Make recommendations for technology investments.
    • Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.
    • Mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers.
    • Provide engineering and technical decisions for Military Aircraft, Military Derivative Aircraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, B-1B, B-2, B-52 and others) and diverse projects.
    • Assignment will provide an excellent opportunity to learn aircraft power systems on the various platforms.
    • This position provides an excellent opportunity to develop new solutions, help grow and mentor the next generation of engineers, and guide the candidates’ career towards the submittal of a candidacy for a position in the Technical Fellowship.
    • Other job responsibilities may include
    • Lead work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects.
    • Lead analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications.
    • Lead testing and validation work on complex system designs to assure that operational and functional requirements are met.
    • Work with other to develop program test strategies.
    • Manage performance of critical suppliers to ensure system integration and compliance with requirements.
    • Conduct program independent reviews and reports results to program leadership.
    • Provide critical support of fielded hardware and software over the entire product lifecycle.
    • Lead research into technology advances for potential application to company business needs. Makes recommendations for technology investments.
    • Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.
    • Work under consultative mentorship.

    Qualification:
    • This position requires an active (or ability to obtain) U.S. Top Secret Security Clearance.
    • Must possess good organizational, interpersonal, and problem solving skills. Must have demonstrated a strong work ethic and sense of urgency for completing assigned work with a history of meeting commitments. Ability to adjust priorities to multiple demands and unanticipated events.
    • Willingness to travel at least 25% of the time as required
    • Highly motivated and must work well in a team environment.
    • The ability to communicate effectively, both verbally and in writing
    *U.S. Citizenship is required by law, regulation, executive order, or government contract.

    Education and Experience:
    • Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 14 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+9 years' related work experience, Master+12 years' related work experience).
    • ABET accreditation is the preferred, although not required, accreditation standard.

    Conditions of Employment:
    Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

    Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

    Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

    Join a team that values your experience!
     
    Job Number: 2019-10166
    Job Location: Oklahoma City, OK
    Input Date: 11/14/2020
    Firm Name: MOSELEY TECHNICAL SERVICES INC
    Address: 7500 S MEMORIAL PKWY STE 215-R
    City, State: HUNTSVILLE, AL 35802
    Phone: 256/880-0446
    Fax Phone: 256/880-0936
    Website: www.moseleytechnical.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Design and Analysis Engineer 5

    Description:
    Design and Analysis Engineer 5

    Location: Oklahoma City, OK
    Duration: 6 Months

    Description:
    Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects. Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications. Leads testing and validation work on complex system designs to assure that operational and functional requirements are met. Works with other to develop program test strategies. Manages performance of critical suppliers to ensure system integration and compliance with requirements. Conducts program independent reviews and reports results to program leadership. Provides critical support of fielded hardware and software over the entire product lifecycle. Leads research into technology advances for potential application to company business needs. Makes recommendations for technology investments. Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.

    OKC Electrical Power Group is seeking senior electrical power engineers. The candidate will mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for client Military Aircraft, Military Derivative Aircraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, B-1B, B-2, B-52 and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft power systems on the various platforms.

    This position provides an excellent opportunity to develop new solutions, help grow and mentor the next generation of engineers, and guide the candidates’ career towards the submittal of a candidacy for a position in the Technical Fellowship.

    Other job responsibilities may include:
    - Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects.
    - Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications.
    - Leads testing and validation work on complex system designs to assure that operational and functional requirements are met.
    - Works with other to develop program test strategies.
    - Manages performance of critical suppliers to ensure system integration and compliance with requirements.
    - Conducts program independent reviews and reports results to program leadership.
    - Provides critical support of fielded hardware and software over the entire product lifecycle.
    - Leads research into technology advances for potential application to company business needs. Makes recommendations for technology investments.
    - Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.
    - Works under consultative mentorship.

    Basic Qualifications (Required Skills and Experience)
    Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 14 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+9 years' related work experience, Master+12 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

    Must possess good organizational, interpersonal, and problem-solving skills. Must have demonstrated a strong work ethic and sense of urgency for completing assigned work with a history of meeting commitments. Ability to adjust priorities to multiple demands and unanticipated events.

    Highly motivated and must work well in a team environment. The ability to communicate effectively, both verbally and in writing

    Education / Experience:
    Bachelor's degree with 14 or more years' experience, Master's degree with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

    Skill Code: 622-Electrical Systems Design
     
    Job Number: 19-15064
    Job Location: Oklahoma City, OK
    Per Diem: split
    Overtime: possible
    Duration: 6 months
    Start Date: Immediately
    Input Date: 11/14/2020
    Firm Name: ICONMA LLC
    Attention: Constance Whitcomb
    Address: 4620 E 53RD ST
    City, State: DAVENPORT, IA 52807
    Phone: 312/502-4795
    Website: www.iconma.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    ECS or Bleed Air Systems Design Engineer

    Description:
    General Summary:
    The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

    Duties and Responsibilities:
    1. Prepare 3D layout models of the BAS and VCS.
    2. Prepare 3D installation and detail models of the BAS and VCS.
    3. Prepare 2D installation, assembly and detail drawings of the BAS and VCS.
    4. Work in a team environment supporting liaison engineering to research root cause and address production discrepancies.

    Education, Work Experience, Certification and/or Licensure:
    1. Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program with 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.

    Knowledge, Skills and Abilities:
    1. Experience using CATIA V5 to prepare 3D parametric models and 2D drawings. Minimum of 10,000 hours.
    2. Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
    3. Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS.




    The Structures Company is an AA/EOE.
     
    Job Number: 301
    Job Location: NC
    Rate: $55-$60/Hr - **DOE**
    Per Diem: Yes
    Overtime: Yes
    Duration: 10+ Months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer - A220

    Description:
    Responsible to manage non-conformity/concessions and late changes to support production and to update the master data for the documentation package that accompanies the aircraft. Responds to technical questions, prepares new modifications for country specific constraints and explains about work orders and drawings, especially for aircraft (A/C) mechanical related items. Establishes and maintains effective communications with FAL production. Responsible for on-site training of new manufacturing engineering employees.
    Qualifications/Basic Job Requirements:
    The incumbent should have 5 years of relevant experience, preferably in manufacturing engineering of structure installations in an international aviation company.
    Knowledge of the principles, practices, methods and tools used in manufacturing engineering.
    Knowledge about non conformities/concessions and design query notes.
    Knowledge of supply chain management.
    Knowledge of quality management system.
    Good knowledge of basic written and spoken English.
    Experience working with A220 Aircraft
    Education/Special Qualifications:
    Must have a degree in Industrial Engineering, Mechanical Engineering or Aerospace Engineering or an equivalent combination of education and experience.
    Other desirable skills and experience include:
    Knowledge of Airbus Industries mechanical process & methods.
    Knowledge of Airbus IT-Tools (TiCon, Zamiz, TAKSY, MODA, DocMaster, Adress).
    Knowledge of common applications such as SAP/R3 (Module PP/PM).
    Familiarity with the American aviation market.
    Aircraft Technician experience from A/C manufacturer.
    Knowledge about aircraft structure installation.
    Knowledge of rules for aircraft design and manufacturing.
    Intercultural experience.
    Knowledge of health, safety and environmental regulations and practices.
     
    Job Number: 1240535
    Job Location: Mobile, AL
    Rate: TBD
    Per Diem: yes
    Overtime: possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
    Attention: Anne Cameron
    Address: P O BOX 965280
    City, State: MARIETTA, GA 30066-0005
    Phone: 770/575-5855
    Fax Phone: 770/575-5856
    Website: www.hi-tecsolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer - no clearance SC

    Description:
    164638/1659-1 Electrical Engineer
    Need Date: A.S.A.P
    Number of Openings 1
    Length of Assignment Estimated one (1) year
    Hourly Pay Rate: $58
    Possible Temp to Hire? No
    Shift, Start & End Time 1st: 0630-1600
    Specific Work Location Greenville, SC



    Job Description:
    Greenville Operations, SC is currently looking to fill an Electrical Engineer position within the Design & Integration skill set to support an Avionics Upgrade (CNS/ATM) project.

    The ideal candidate will be responsible for providing electrical engineering avionics designs in support of CNS/ATM upgrade on a C-130H aircraft. This includes development/design of block diagrams, wiring diagrams, and cable assemblies for avionics system installations. Experience developing ground and flight test procedures and assisting the production team as required during installation and test is also required.

    Minimum Requirements:
    (Education, years of experience, specific skills or tools, etc.)
    • Bachelor's Degree in Electrical Engineering or equivalent design experience with at least 10 years of electrical design.

    • Must be experienced with Engineering design software for electrical design.

    • Ability to understand schematics, generate interconnect diagrams and troubleshoot equipment installations.

    • Experience with aircraft architectures and electrical integration of avionics subsystems.
     
    Job Number: JEG -1659-1
    Job Location: Greenville, SC
    Rate: 58/hr max
    Per Diem: no
    Duration: 12 months
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Integration Engineer

    Description:
    POSITION SUMMARY:
    The EWIS Engineer, Senior will support in a blended role, drafting wire routings throughout VIP aircraft. Specific knowledge with EWIS standard design and the ability to read electrical drawings while responsible for 3D engineering drawings related to electrical systems and components in support of VIP aircraft completions.

    EXAMPLES OF ESSENTIAL JOB FUNCTIONS:
    1. Provide engineering design and analysis of electrical systems and components.
    2. Prepare electrical system reports, Engineering Authorizations (EAs), drawings, analysis, and test plans.
    3. Develop electrical system modifications and installation work instructions, procedures and recommendations.
    4. Work experience with EWIS standard design and wire separation requirements.
    5. Develop cabin electrical modification/installation work instructions, procedures and recommendations.
    6. Work within engineering team to delegate and assign sections of design elements to appropriate team members.
    7. Provide analysis and reports to substantiate that designs meet applicable criteria outlined in CFRs both foreign and domestic.
    8. Identifies discrepancies and/or problems with drawings before releasing to production and implements corrective action to ensure the timely release.
    9. Provides intermediate level technical support and engineering disposition to resolve aircraft engineering/electrical systems problems.
    10. Using company procedures, applies intermediate level engineering knowledge to resolve moderate to complex issues.
    11. Develops and implements engineering modifications and retrofits to completions in progress.
    12. Maintains intermediate level awareness of both foreign and domestic regulations and required compliance including FARs, ADs, and SBs.
    13. Actively works to improve daily processes, and ensures all work meets completion aircraft requirements.
    14. Performs other duties as assigned.

    MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
    1. Bachelor’s Degree in engineering, with experience directly supporting knowledge of EWIS regulations.
    2. 8 – 10 years experience in Aviation Electrical Systems Engineering or equivalent.

    REQUIRED SKILLS AND ABILITIES:
    1. Proficient with SolidWorks.
    2. Proficient with Microsoft Word, Excel, PowerPoint, Outlook, and Internet Explorer.
    3. Knowledge of MS Databases (SQL or Microsoft Access) preferred.
    4. Aviation background and experience with electrical systems.
    5. Knowledge of Federal Aviation Regulations (CFRs) governing aircraft certification preferred.
    6. Strong knowledge of industry electrical systems and documentation standards.
    7. Experience with electrical systems and components.
    8. Requires working knowledge of applicable regulatory agency requirements and ability to discern how a design may be influenced by them.
    9. Requires reasoning/analytical skills to creatively design and problem solve.
    10. Strong communication and problem-solving skills.
    11. Strong time-management and organizational skills.




    The Structures Company is an AA/EOE.
     
    Job Number: 347
    Job Location: IN
    Rate: $57/Hr. **DOE**
    Per Diem: Yes
    Duration: 12+ Months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Systems Design Engineer

    Description:
    OKC Electrical Power Group is seeking senior electrical power engineers. The candidate will mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for Military Aircraft, Military Derivative Aircraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, B-1B, B-2, B-52 and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft power systems on the various platforms.

    Other job responsibilities may include
    • Leads work with customers to develop and document complex electronic and electrical system requirements.
    • Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications.
    • Leads work to test and validate to ensure system designs meet operational and functional requirements.
    • Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements.
    • Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle.
    • Researches technology advances for potential application to company business needs.
    • Makes recommendations for technology investments.
    • Works under minimal mentorship.
     
    Job Number: ESDE_OK
    Job Location: Oklahoma City,, OK
    Rate: DOE
    Per Diem: Possible
    Overtime: Possible
    Duration: 6 mon
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: AMERICAN CYBERSYSTEMS
    Attention: Vibhas Sadhu
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.acsicorp.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Systems Engineer

    Description:
    The Electrical Systems Engineer provides expertise in support of electrical/electronic systems through all phases of a project, including research, preliminary design, detailed design, development, certification, production, and product support.

    Duties and Responsibilities:
    • Design, development and certification support of the aircraft Electrical Power System, including power generation, advanced power distribution, and battery technology.
    • Technology focal for motor / motor controllers
    • Perform trade studies to determine optimal engineering solution
    • Development and validation of requirements
    • Design, plan and support of integration tests for laboratory and aircraft testing
    • Provide technical support for troubleshooting, root cause analysis and corrective action
    • Preparation and presentation of technical data in design reviews
    • Review and approval of Qualification Test Plans, Procedures and Reports

    Education, Work Experience, Certification and/or Licensure:
    • BS in Electrical / Electronic Engineering, Master’s degree preferred
    • 5 or more years of aviation experience involving research, design, development and certification of electrical/electronic systems

    Knowledge, Skills and Abilities:
    • Knowledge of aircraft electrical power systems
    • Knowledge of system modeling and analysis tools
    • Knowledge of motor / motor controller theory and application
    • Knowledge of FAR Part 23 or 25 regulations preferred
    • Knowledge of RTCA/DO-160, RTCA/DO-178 and RTCA/DO-254 processes preferred
     
    Job Number: 28-005
    Job Location: Greensboro, NC
    Rate: $55 - $65/hr
    Per Diem: Yes
    Overtime: Yes
    Duration: 1+ years
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Systems Engineer

    Description:
    The Senior Engineer Electrical Systems performs a variety of engineering work including design, analysis, substantiation, certification, drawing interpretation and project management related to transport category aircraft. Provides (or may provide) senior level engineering drawings related to electrical systems and components in support of VIP aircraft completions.

    EXAMPLES OF ESSENTIAL JOB FUNCTIONS:
    1. Design and analyze electrical systems and components, typically in support aircraft interior modifications and avionics upgrades (STC projects).
    2. Prepare electrical engineering reports, Engineering Authorization (EAs), drawings, analysis, and test plans.
    3. Develop cabin electrical modification/installation work instruction, procedures and recommendations.
    4. Coordinate and monitor electrical aspects of project schedule with project managers.
    5. Monitor and support electrical kit development and parts suppliers (internal and external).
    6. Support electrical aspects of proposal development. 7. Coordinate with foreign and domestic approval authorities and their representatives for any necessary assistance and/or approvals.
    8. Work within engineering team to delegate and assign work to appropriate team members.
    9. Applies area of specialty to design, develop and implement creative and innovative solutions to difficult problems.
    10. Reviews progress with management and recommends corrective action along with review of alternatives. 11. Performs other duties as assigned.

    MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
    1. Bachelor’s Degree in Electrical/Aerospace Engineering.
    2. 8+ years of experience in Aviation Electrical Engineering.
    3. 4+ years of experience with aircraft electrical systems and wiring diagrams
    4. Familiarity with the Supplemental Type Certificate (STC) process, OEM documentation, and working with DERs

    REQUIRED SKILLS AND ABILITIES:
    1. Proficient with Microsoft Visio.
    2. Proficient with Microsoft Word, Excel, PowerPoint, Outlook, and Internet Explorer.
    3. Knowledge of MS Databases (SQL or Microsoft Access) preferred. 4. Aviation background and electrical/avionics experience.
    5. Knowledge of industry design and documentation standards.
    6. Experience with electrical assemblies and components.
    7. Ability to coach and motivate team of engineers.
    8. Ability to work independently and cross-functionally.
    9. Budget and project management experience.
    10. Experience leading employees/teams in productive and efficient manner.
    11. Requires in-depth knowledge of applicable regulatory agency requirements and discern how a design may be influenced by them. 12. Requires reasoning/analytical skills to creatively design and problem solve.
    13. Strong communication and problem-solving skills.
    14. Strong time-management and organizational skills.


    The Structures Company is an AA/EOE.
     
    Job Number: 343
    Job Location: IN
    Rate: $57/Hr. **DOE**
    Per Diem: Yes
    Duration: 12+ Months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electro-Magnetic Effects Engineer (EME)

    Description:
    Perform analysis and design relating to effects of lightning (direct and indirect), surface charging, grounding, structural bonding, circuit isolation, transfer impedance, shielding effectiveness, effects of radiated/conducted emissions and susceptibility, near field/far field electric fields, corona, P-static, etc.
    • Provide aircraft level EME guidance
    • Establish requirements, processes and methodologies (EMC, EMI, HIRF, LSP, G&B, RF, etc)
    • System design and architecture analysis
    • Interact directly with suppliers
    • Define traceability to the FARs
    • Perform and teach electromagnetic compatibility design and analysis
    • Perform computational electromagnetics calculations and assessments
    • Validate and verify of requirements
    • Provide guidance for System test and certification
    • Report Status
    • Provide subject-matter expert level guidance on both practical and theoretical aspects of the EME systems design
    • Provide support for engineering, certification, and flight test departments from concept to product certification
    • Foster a culture that inspires high levels of performance and employee retention
    • Provide EME guidance to the various Sub-systems and Structures IPTs in support of their development and certification
    We're looking for someone who has:
    • Bachelor’s degree in relevant field required.
    • 5+ years of experience within the EME discipline.
    • EME systems design and integration experience
    • Aircraft development experience
    • Experience Developing EME processes, guidelines and methodologies to support the design of the new aircraft
    • Demonstrate a clear understanding of industry guidelines and documents (MIL-STD-285, MIL-STD-461, MIL-STD-464, SAE ARP5412, SAE ARP5414, AC 20-53A, AC 20-107, DO-160, MIL-STD-1541, MIL-STD-1757, etc)
     
    Job Location: Reno, NV
    Rate: DOE
    Per Diem: Possible
    Overtime: Possible
    Duration: Temp to Perm
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Tara Gilbert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    F-35 Project Management Support CA

    Description:
    165930 Job Title: F-35 Project Mgmt Support

    Work Site Address: 1 Space Park Blvd, Redondo Beach, CA 90278
    Job Number: 1795 (19023764)
    Max Pay Rate: 38.00
    Start Date: 8/19/2019
    End Date: 08/14/2020
    Position Type: Contract



    Job Description:
    Focused support within the F-35 Fleet Modifications (FM) Team to fulfill various project planning, status reporting, and augmented Cost Account Management (CAM) responsibilities. Support the FM Team Manager to accomplish a variety of precise, time-sensitive and high-quality monthly deliverables, metrics and presentations. Responsibilities include; collecting, editing and preparing incremental accomplishment data, reports and metrics; assessing team performance to plan and defining estimate to complete projections; development of team labor charging recommendations; determining earned value variance causes, explanations and corrective recommendations/actions; assist in developing proposal response basis of estimates, to include long term staffing forecasts/implications; and coordinating within the team as a focal point to enable efficient collaboration with other functional organizations. Assist with development of proposal Basis of Estimate (BOE) artifacts and supporting rationale documentation. Must possess excellent interpersonal, written and oral communication skills. Position requires a resourceful, independent self-starter able to analyze and solve CAM derived objectives involving solicitations of and commitments from various stakeholders.


    Qualifications and Education Requirements

    •Solid background and understanding of Project Management fundamentals
    •Bachelor’s degree
    •3 years of relevant experience
    •Proficient in applying Cost Account Management/Earned Value principles
    •Adept in developing products in MS Word, Excel, Project and Power Point
    •Exceptional verbal, written, presentation, and leadership skills
    •Bachelor degree from an accredited college

    Preferred Skills

    •Cost Account Management / Professional Logistics Accreditation(s)
    •MS Access proficiency (creating queries, forms, reports and code/VBA)
    •Six Sigma Certification / Facilitation experience
    •Prior aircraft Maintenance, Repair, Overhaul and Upgrade (MRO&U) program experience
    •Familiarity with the F-35 program/platform a plus

    Location: Redondo Beach
    Schedule: 9/80
    Duration of assignment: Up to 1 year
     
    Job Number: JK-1795ATO
    Job Location: Redondo Beach, CA
    Rate: 38/hr max
    Duration: 1 year
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    FEMAP FEA Analyst

    Description:
    Aircraft

    Job location: Montreal, Quebec Canada
     
    Job Location: Canada
    Input Date: 11/23/2020
    Firm Name: ADVANCED TECHNOLOGY
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Email: sclark@advancedtechno.com
    Website: www.advancedtechno.com

    FEMAP FEA Analyst

    Description:
    Aircraft
     
    Job Location: North Dakota
    Input Date: 11/23/2020
    Firm Name: ADVANCED TECHNOLOGY
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Email: sclark@advancedtechno.com
    Website: www.advancedtechno.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Control Engineer

    Description:
    Job Description: This position is for a flight test control engineer at Edwards Air Force Base, CA to provide ground operations support for flight test planning, execution, and verification/validation of performance at the F-16 Combined Test Force (CTF). The applicant will also be expected to provide ground ops support at the F-22 & F35 CTF as needed. The applicant will team with US Air Force, contractor, and civil service engineers as part of an integrated test team for developmental and operational tests. This position will serve as the principal focal point between aircraft maintenance and flight operations engineering personnel. He/she will (1) the coordinate and direct the execution of preflight and post-flight activities to ensure aircraft test readiness, (2) provide configuration control of aircraft software and hardware configurations to ensure that hardware, software, and instrumentation configurations are correct to meet test objectives, (3) coordinate maintenance and logistic support for systems checkouts, flight operations, and anomaly troubleshooting, and (4) coordinate as required with other organizations associated with test readiness.
    This position will act as the principal focal point between maintenance, engineering and flight crew. Relays maintenance related aircraft constraints to the aircraft FTE's. Consult with management on changes or problems. Solve application and technical problems working collaboratively and independently with individuals from diverse technical disciplines and represent the organization frequent inter-organizational and outside customer contacts; Adapt to quickly changing tasks and requirements and learn new skills quickly.
    **Swing shift, overtime, travel and weekend work may be required to support mission & staffing needs.

    **Must be a US Citizen. This position is located at a facility that requires special access.**

    Basic Qualifications
    Broad experience with fighter aircraft flight test methods, aircraft maintenance, avionics maintenance and flight test instrumentation.
    Experience in USAF maintenance activities and procedures, and T-2 modification processes.
    Must have an active/current Secret clearance.

    Desired skills
    *Swing shift, odd shifts, overtime, travel and weekend work may be required as needed.
    - (F-16 experience is highly preferred / F-22 & F35 experience desired) Broad knowledge of fighter aircraft flight test methods, aircraft maintenance, avionics maintenance and flight test instrumentation.
    - Exceptional planning and coordinating skills are required.
    - Ability to interface with all levels of project management is desired. The applicant must have a strong customer focus, reinforced with excellent communication skills and interpersonal skill. Above average oral and written communication skills are desired.
     
    Job Location: Edwards AFB, CA
    Input Date: 11/14/2020
    Firm Name: GLOBAL CONTRACT PROFESSIONALS
    Attention: Recruiter
    Address: P O BOX 161127
    City, State: FORT WORTH, TX 76161-1127
    Phone: 817/847-6673
    800 Phone: 800/942-2376
    Fax Phone: 817/847-9444
    Website: www.teamglobal.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Controls

    Description:
    On any given day you might:
    • Develop air data systems design, architecture and support product plan development, including qualification and certification plans
    • Provide subject matter expert level technical leadership, mentoring and guidance on both practical and theoretical aspects of air data systems
    • Define requirements for the air data systems to ensure compliance with regulations and customer requirements
    • Research new air data concepts and technologies that fit the Aerion technology roadmap
    • Provide validation and verification of air data systems requirements
    We're looking for someone who has:
    • Bachelor’s Degree in relevant engineering area, with a Master’s degree in a technical and/or management specialty preferred
    • 10+ years of deep, hands-on experience in air data and avionics systems development, design and testing in a Military, Commercial, or business aircraft development program
    • 8+ years of demonstrated experience specific to air data systems, air data technical principles and technologies, and managing system suppliers as the technical point of contact
    • In-depth and current knowledge of Part 25 regulatory requirements, including air data specific certification requirements (e.g. RVSM)
    • Experience and expertise in the development of commercial and/or high-end business jets strongly desired, including flight test experience
    • Recent experience in developing air data, avionics and other aircraft systems, such as Automatic Flight Control System (AFCS), from concept through certification strongly desired
    • Optical air data systems experience desired
    • Demonstrated ability to understand & define requirements, generate architecture, and achieve compliance
    We want to build a company around people who are:
    • Highly self-motivated with a strong bias for action
    • Effective at nurturing strong professional relationships
    • Committed to fostering a culture of empowerment & creativity
    We want to build a team around people who are:
    • Highly self-motivated with a strong bias for action
    • Effective at nurturing strong professional relationships
    • Committed to fostering a culture of empowerment & creativity
    Let's Build a Company Together
    We're looking for people from scrappy startups, established corporations, and everything in between. Bring your ideas and experiences, be ready to innovate and learn, and together we'll revolutionize the aerospace industry!
     
    Job Number: 1
    Job Location: Reno, NV
    Per Diem: Split
    Overtime: Possible
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Tara Gilbert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Controls Engineer

    Description:
    Our client, a global security and aerospace company, is principally engaged in the research, design, development, manufacture, integration and sustainment of advanced technology systems, products and services. Solving complex challenges and delivering innovative solutions to help customers keep people safe and provide them essential services, our client is hiring for the following critical need:

    Flight Controls Engineer
    (U.S. Citizenship Required*)
    Edwards AFB, CA
    2019-10185
    Responsibilities:
    • Provide ground operations support for flight test planning, execution, and verification/validation of performance at the F-16 Combined Test Force (CTF).
    • Expected to provide ground ops support at the F-22 & F35 CTF as needed.
    • Team with US Air Force, contractor, and civil service engineers as part of an integrated test team for developmental and operational tests.
    • Serve as the principal focal point between aircraft maintenance and flight operations engineering personnel.
    • Coordinate and direct the execution of preflight and post-flight activities to ensure aircraft test readiness.
    • Provide configuration control of aircraft software and hardware configurations to ensure that hardware, software, and instrumentation configurations are correct to meet test objectives.
    • Coordinate maintenance and logistic support for systems checkouts, flight operations, and anomaly troubleshooting.
    • Coordinate as required with other organizations associated with test readiness.
    • Act as the principal focal point between maintenance, engineering and flight crew.
    • Relay maintenance related aircraft constraints to the aircraft FTE's.
    • Consult with management on changes or problems.
    • Solve application and technical problems working collaboratively and independently with individuals from diverse technical disciplines and represent the organization frequent inter-organizational and outside customer contacts.
    • Adapt to quickly changing tasks and requirements and learn new skills quickly.

    Qualification:
    • Must have an active/current Secret Clearance.
    • Swing shift, odd shifts, overtime, travel and weekend work may be required as needed.
    • Broad experience with fighter aircraft flight test methods, aircraft maintenance, avionics maintenance and flight test instrumentation.
    • Experience in USAF maintenance activities and procedures, and T-2 modification processes.
    • (F-16 experience is highly preferred / F-22 & F35 experience desired) Broad knowledge of fighter aircraft flight test methods, aircraft maintenance, avionics maintenance and flight test instrumentation.
    • Exceptional planning and coordinating skills are required.
    • Ability to interface with all levels of project management is desired.
    • Must have a strong customer focus, reinforced with excellent communication skills and interpersonal skill.
    • Above average oral and written communication skills are desired.
    *U.S. Citizenship is required by law, regulation, executive order, or government contract.

    Education and Experience:
    • Bachelor’s Degree combined with 4+ years of experience, or a Master’s Degree with 2+ years of experience.

    Conditions of Employment:
    Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

    Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

    Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

    Join a team that values your experience!
     
    Job Number: 2019-10185
    Job Location: Edwards AFB, CA
    Input Date: 11/14/2020
    Firm Name: MOSELEY TECHNICAL SERVICES INC
    Address: 7500 S MEMORIAL PKWY STE 215-R
    City, State: HUNTSVILLE, AL 35802
    Phone: 256/880-0446
    Fax Phone: 256/880-0936
    Website: www.moseleytechnical.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Deck Design Engineer

    Description:
    • Design and develop the new aircraft Flight Deck with input from HMI, interior supplier, Flight Controls IPT and the Avionics IPT
    • Embody the new aircraft Flight Deck concept into the 3D Digital Mock-Up (DMU)
    • Model components and place them in the DMU
    • Add supplier furnished 3D models into the DMU
    • Model the Flight Deck instrument panels
    • Utilize 3D Human Builder programs to simulate crew interactions in the 3d DMU Flight Deck
    • Provide direct input to the Flight Deck design and Avionics engineers
    • Assist in the creation of the new aircraft Flight Deck mock-up
    • Assist in the creation of the new aircraft Flight Deck Simulator
    • Ensure compliance with regulations and customer requirements
    • Interact directly with suppliers
    • Work with strict configuration control requirements
    • Report Status
    • Provide support for engineering, certification, and flight test departments from concept to product certification
    • Foster a culture that inspires high levels of performance and employee retention
    We're looking for someone who has:
    • Bachelor’s degree in relevant field required.
    • 5+ years of experience within the Avionics discipline.
    • Experience working on aircraft development programs
    • Expert level of competency using CATIA V5
    • Working knowledge of PLM tools
    • Knowledge of HMI design and integration
    • Clear understanding of all aspects of Flight Deck development
    • An understanding of Systems Engineering
    • An understanding of anthropometrics, pilot psychology, Pilot workload, HMI and flight deck equipment interactions
    • Familiarity with Part 25 Regulations especially 1302, 1309, 1322, ARP 4754A, ARP 6049494, Mil-STD 1472 and other relevant industry standards is preferred.
    • Experience with Flight Deck mock-up and Simulator design
     
    Job Location: Reno, NV
    Rate: DOE
    Per Diem: Possible
    Overtime: Possible
    Duration: Temp to Perm
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Tara Gilbert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Deck Design Engineer - Avionics

    Description:
    • Design and develop the new aircraft Flight Deck with input from HMI, interior supplier, Flight Controls IPT and the Avionics IPT
    • Embody the new aircraft Flight Deck concept into the 3D Digital Mock-Up (DMU)
    • Model components and place them in the DMU
    • Add supplier furnished 3D models into the DMU
    • Model the Flight Deck instrument panels
    • Utilize 3D Human Builder programs to simulate crew interactions in the 3d DMU Flight Deck
    • Provide direct input to the Flight Deck design and Avionics engineers
    • Assist in the creation of the new aircraft Flight Deck mock-up
    • Assist in the creation of the new aircraft Flight Deck Simulator
    • Ensure compliance with regulations and customer requirements
    • Interact directly with suppliers
    • Work with strict configuration control requirements
    • Report Status
    • Provide support for engineering, certification, and flight test departments from concept to product certification
    • Foster a culture that inspires high levels of performance and employee retention


    We're looking for someone who has:
    • Bachelor’s degree in relevant field required.
    • 5+ years of experience within the Avionics discipline.
    • Experience working on aircraft development programs
    • Expert level of competency using CATIA V5
    • Working knowledge of PLM tools
    • Knowledge of HMI design and integration
    • Clear understanding of all aspects of Flight Deck development
    • An understanding of Systems Engineering
    • An understanding of anthropometrics, pilot psychology, Pilot workload, HMI and flight deck equipment interactions
    • Familiarity with Part 25 Regulations especially 1302, 1309, 1322, ARP 4754A, ARP 6049494, Mil-STD 1472 and other relevant industry standards is preferred.
    • Experience with Flight Deck mock-up and Simulator design




    The Structures Company is an AA/EOE.
     
    Job Number: 330
    Job Location: Reno, NV
    Rate: ***DOE***
    Per Diem: Yes
    Overtime: Possible
    Duration: 6 Month Contract to Hire
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Simulator Technician

    Description:
    Flight Simulator Technician to collaborate with a diverse team of technicians, engineers, and training instructors to ensure operational and reliability goals are met on a wide variety of flight simulator equipment used for training by global airlines.

    Qualified Experience / Skills / Training:
    • 2 years of electronics, computer science, PC repair, or network education preferred.
    • Experience repairing electronic systems, aircraft avionics, computers, software programming, and/or networks preferred.
     
    Job Number: 1241204
    Job Location: Miami, FL
    Rate: 18.00
    Per Diem: yes
    Overtime: possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
    Attention: Anne Cameron
    Address: P O BOX 965280
    City, State: MARIETTA, GA 30066-0005
    Phone: 770/575-5855
    Fax Phone: 770/575-5856
    Website: www.hi-tecsolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Control Engineer

    Description:
    Flight Test Control Engineer

    Edwards Air Force Base, CA
    $85/hr
    15 month W2 contract
    Swing Shift, 9/80
    *MUST HAVE AN ACTIVE DOD SECRET CLEARANCE*

    Description
    This position is for a flight test control engineer at Edwards Air Force Base, CA to provide ground operations support for flight test planning, execution, and verification/validation of performance at the F-16 Combined Test Force (CTF). The applicant will also be expected to provide ground ops support at the F-22 & F35 CTF as needed. The applicant will team with US Air Force, contractor, and civil service engineers as part of an integrated test team for developmental and operational tests. This position will serve as the principal focal point between aircraft maintenance and flight operations engineering personnel. He/she will (1) the coordinate and direct the execution of preflight and post-flight activities to ensure aircraft test readiness, (2) provide configuration control of aircraft software and hardware configurations to ensure that hardware, software, and instrumentation configurations are correct to meet test objectives, (3) coordinate maintenance and logistic support for systems checkouts, flight operations, and anomaly troubleshooting, and (4) coordinate as required with other organizations associated with test readiness.
    This position will act as the principal focal point between maintenance, engineering and flight crew. Relays maintenance related aircraft constraints to the aircraft FTE's. Consult with management on changes or problems. Solve application and technical problems working collaboratively and independently with individuals from diverse technical disciplines and represent the organization frequent inter-organizational and outside customer contacts; Adapt to quickly changing tasks and requirements and learn new skills quickly.
    **Swing shift, overtime, travel and weekend work may be required to support mission & staffing needs.

    **Must be a US Citizen. This position is located at a facility that requires special access.**

    Basic Qualifications
    Broad experience with fighter aircraft flight test methods, aircraft maintenance, avionics maintenance and flight test instrumentation.
    Experience in USAF maintenance activities and procedures, and T-2 modification processes.
    Must have an active/current Secret clearance.

    Desired skills
    *Swing shift, odd shifts, overtime, travel and weekend work may be required as needed.
    - (F-16 experience is highly preferred / F-22 & F35 experience desired) Broad knowledge of fighter aircraft flight test methods, aircraft maintenance, avionics maintenance and flight test instrumentation.
    - Exceptional planning and coordinating skills are required.
    - Ability to interface with all levels of project management is desired. The applicant must have a strong customer focus, reinforced with excellent communication skills and interpersonal skill. Above average oral and written communication skills are desired.
     
    Job Number: 11852
    Job Location: Palmdale, CA
    Rate: 85.00
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 15 months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Design Engineer

    Description:
    The Engineer, Flight Test position is responsible for the design, development, and coordination equipment to support Flight Test operations.

    Duties and Responsibilities:
    1. Designs, develops, coordinates, equipment, and Installations, to support Flight Test operations. Typical equipment and installations including ballast, data booms, cockpit displays, antennas, racks, and various transducers (acceleration, pressure, temperature, displacement, etc.).
    2. Creates engineering drawings and related documents for soundness, efficiency, and simplicity in design; completeness, clarity, and dimensional accuracy; correctness of materials and processes; conformity to design/drafting standards, design specifications, and practicability; and economy of fabrication, assembly, and installation.
    3. Supports fabrication and installation of test equipment.
    4. Resolves issues related to design, documentation, procurement, fabrication, and installation.
    5. Coordinates designs for Instrumentation Installations.
    6. Monitors installation progress for support of upcoming flights.
    7. Coordinates aircraft configuration with the Ground Station which will require operational testing out of the Greensboro facility as well as off-site testing as required.
    8. Designs structural products and components of products to support Flight Test Instrumentation.

    Education, Work Experience, Certification and/or Licensure:
    1. Bachelors’ degree in Aerospace Engineering, Electrical Engineering, Engineering Technology other related field preferred.
    2. 5 years’ experience in aerospace design and testing.

    Knowledge, Skills and Abilities:
    1. Proficiency in 3D multiple component designs and 2D fully dimensional and tolerance drawings. CATIA V5, PLM systems, TeamCenter strongly preferred.
    2. Strong Microsoft Office Suites (Word, Excel, and PowerPoint) strongly preferred.
    3. Strong computer operating systems skills.
    4. Excellent oral and written communication skills.
    5. Excellent interpersonal skills.
    6. Experience with aircraft data acquisition systems.
    7. Experience with FAA regulations.
     
    Job Number: 28-013
    Job Location: Greensboro, NC
    Rate: $50 - $60/hr
    Per Diem: Yes
    Overtime: Yes
    Duration: 1+ years
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Heavy Aircraft Maintenance Program Managers

    Description:
    STS Mod Center is hiring Heavy Aircraft Maintenance Program Managers in Melbourne, Florida.

    Qualifications:
    Heavy aircraft check experience mandatory.
    Must hold a valid Driver License.
    Must not be under a doctor’s care with limited work restrictions.
    Must be able to pass a back ground check and obtain all necessary badging.
    Must be able to ascend/descend ladders, stairs and work stands unassisted.
    Must be able to bend, kneel, crawl and stoop frequently in confined spaces.
    Must be able to lift up to 75 pounds unassisted.
    Must be willing to work in an environment that is subject to changing climate conditions and moderate noise levels.
    Must have excellent communication and people skills.
    Must be able to exercise good judgment in a team environment as well as in aircraft maintenance and safety.
    Must have problem solving and organizational skills. Must be able to read and understand company and manufacturer Manuals.
    Must be able to perform all line maintenance functions un-supervised at any time.
    Must own and provide a minimum set of hand tools
    Benefits:
    STS Mod Center offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

    We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-800-359-4787.

    Thanks for taking the time, and we look forward to hearing from you soon.
     
    Job Number: 49787
    Job Location: Melbourne, FL
    Input Date: 11/14/2020
    Firm Name: STS AEROSTAFF SERVICES
    Attention: STS Technical Services
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 877/707-5767
    Fax Phone: 877/707-5767
    Website: www.stsaviationgroup.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Hydraulic Systems Engineer

    Description:
    • Looking for a Hydraulic Systems Engineer.
    • Someone with experience laying out the entire Hydraulic system in an aircraft.
    • Experience with vendor selection, layout of entire system, requirements management.
    • Must have a degree.
    • Experience at Bombardier, Embraer, or Gulfstream is ideal

    The Structures Company is an AA/EOE.
     
    Job Number: 329
    Job Location: NC
    Rate: $75/Hr. **DOE**
    Per Diem: Yes
    Overtime: Yes
    Duration: 12+ Months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Industrial Engineer

    Description:
    PDS is seeking Industrial Engineers for an assignment in Mobile, AL.
    In this position the ideal candidate would be responsible for determining the most effective ways to manufacture an Aircraft. Develops ways to increase productivity, maximize efficiency, and manage human capital more effectively. Requires a Bachelor's Degree in Manufacturing, Engineering or a relevant field.
    Experience in a multi-cultural work environment. Develop most efficient ways to use people, machines, materials and information
    Help production and support functions to increase productivity.
    Optimize methods of business organization.
    Study product requirements and design manufacturing and information systems to meet requirements.
    Develop management control systems.
    Apply statistical methods and perform mathematical calculations to determine manufacturing processes, staff requirements, and production standards.
    Assist in financial planning and cost analysis.
    Design production planning and control systems.
    Design methods to ensure product quality.
    Resolve production problems.
    Evaluate effects of product design changes
    for management review, action, and control.
    Estimate production costs.
    Create sampling procedures and designs.
    Evaluate accuracy of production and testing equipment.
    Study and rearrange org charts, material flow, and operations sequence.
    Coordinate quality control objectives and activities to resolve production problems, maximize product reliability, and minimize cost.
    Communicate with management and user personnel to develop production standards
    Ensure consistency of operations and products in the Single Aisle program.
     
    Job Number: 1910108500
    Job Location: Mobile, AL
    Rate: open
    Per Diem: Split
    Overtime: Possible
    Duration: 6 mos +
    Start Date: asap
    Input Date: 11/14/2020
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Rick Ingle
    Address: 11828 W CENTRAL STE 100
    City, State: WICHITA, KS 67212-5129
    Phone: 316/729-1800
    800 Phone: 800/333-8644
    Fax Phone: 316/729-1857
    Website: www.pdstech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Industrial Engineer - A220

    Description:
    Responsible for determining most effective ways to manufacture an Aircraft. Develops ways to increase productivity, maximize efficiency, and manage human capital more effectively.
    Qualifications/Basic Job Requirements:
    2-5 years of experience in aviation
    Experience working with A220 Aircraft
    Knowledge of basic Production and Quality rules in aviation
    Education/Special Qualifications:
    A Bachelor's Degree in Manufacturing, Engineering or a relevant field.
    Experience in a multi-cultural work environment.
     
    Job Number: 1240524
    Job Location: Mobile, AL
    Rate: TBD
    Per Diem: yes
    Overtime: possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
    Attention: Anne Cameron
    Address: P O BOX 965280
    City, State: MARIETTA, GA 30066-0005
    Phone: 770/575-5855
    Fax Phone: 770/575-5856
    Website: www.hi-tecsolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Interior Designer

    Description:
    The Interior Design Engineer will perform interior design engineering for cabin & cockpit structures, components, and trim for aircraft. This includes requirements definition for the entire interior including liners, monuments, and seats. Familiarity with FAA certification requirements pertaining to aircraft interiors and human factors is desired. The individual will also support production aircraft completions and supply chain as needed to clarify requirements and provide dispositions to engineering deviations. Most important is the desire to work as a key contributor to the overall engineering organization and provide our customers with the world’s most advance aircraft.

    Duties and Responsibilities:
    • Creates conceptual designs for interiors of the aircraft through 3D modeling software (CATIA), drawings, and/or drafting application.
    • Develops designs for form/fit/function to meet customer and design criteria.
    • Provides designs for the fabrication process including sheet metal, extrusions and inject molding.
    • Familiarity with structural analysis methods, load paths, and material properties.
    • Validates engineering designs per engineering core principles, design standards, processes and industry best practices.
    • Makes recommendations to engineering lead/management.
    • Researches and maintains up to date knowledge of technical data pertaining to cabin, cockpit structures, hardware, material, and finishes.

    Education, Work Experience, Certification and/or Licensure:
    • Bachelors’ degree in an engineering field of study from a four year college or university is required. (In lieu of degree, management may elect to consider individuals with a equivalent years of combined experience and training.)
    • Masters’ degree in Engineering preferred.
    • Minimum of 10 years engineering design experience directly related to mechanical/interior design required.

    Knowledge, Skills and Abilities:
    • Working knowledge of conceptual design development of aircraft interiors.
    • Working knowledge of industry standard (i.e. - parts lists, bill of materials, parts and standards callout, etc).
    • In-depth knowledge of Geometric Dimensioning and Tolerancing (GD&T).
    • Familiarity with 14CFR Part 23/25.
    • Proficiency in CATIA V5 workbenches or equivalent 3D modeling tools (i.e. - Solidworks, Unigraphics, etc).
    • Proficiency in Teamcenter (or equivalent PLM tool).
    • Ability to work independently or within a team environment.
    • Ability to communicate effectively throughout all levels within an organization and present data clearly and concisely.
    • Ability to work cross functionally with Quality and Production to resolve issues on the production line.
     
    Job Number: 28-007
    Job Location: Greensboro, NC
    Rate: $50 - $60/hr
    Per Diem: Yes
    Overtime: Possible
    Duration: 1+ years
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Lead A&P Mechanics

    Description:
    STS Mod Center is now hiring Lead A&P Mechanics to join its award-winning team in Melbourne, Florida.

    Qualifications:
    Previous three years AP experience.
    Must have one year lead experience.
    Must have valid AP license.
    Knowledge on the CRJ200 and genfams preferred.
    Must hold a valid Driver License.
    Must not be under a doctor’s care with limited work restrictions.
    Must be able to pass a back ground check and obtain all necessary badging.
    Must be able to ascend/descend ladders, stairs and work stands unassisted.
    Must be able to bend, kneel, crawl and stoop frequently in confined spaces.
    Must be able to lift up to 75 pounds unassisted.
    Must be willing to work in an environment that is subject to changing climate conditions and moderate noise levels.
    Must have excellent communication and people skills.
    Must be able to exercise good judgment in a team environment as well as in aircraft maintenance and safety.
    Must have problem solving and organizational skills.
    Must be able to read and understand company and manufacturer Manuals.
    Must be able to perform all line maintenance functions un-supervised at any time
    Must own and provide a minimum set of hand tools.
    Benefits:
    STS Mod Center offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

    We know it takes great people to do great work, so if you’re interested in joining the STS Mod Center family, we encourage you to apply on this page. Have questions? Give us a call at 1-800-359-4787.

    Thanks for taking the time, and we look forward to hearing from you soon.
     
    Job Number: 48780
    Job Location: Melbourne, FL
    Input Date: 11/14/2020
    Firm Name: STS AEROSTAFF SERVICES
    Attention: STS Technical Services
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 877/707-5767
    Fax Phone: 877/707-5767
    Website: www.stsaviationgroup.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Lead Aircraft Sheet Metal Mechanics

    Description:
    STS Mod Center is now hiring Lead Aircraft Sheet Metal Mechanics to join its award-winning team in Melbourne, Florida.

    Qualifications:
    Previous three years leads experience.
    Must have AP license.
    Knowledge on the CRJ200 and genfams preferred.
    Must hold a valid Driver License.
    Must not be under a doctor’s care with limited work restrictions.
    Must be able to pass a back ground check and obtain all necessary badging.
    Must be able to ascend/descend ladders, stairs and work stands unassisted.
    Must be able to bend, kneel, crawl and stoop frequently in confined spaces.
    Must be able to lift up to 75 pounds unassisted.
    Must be willing to work in an environment that is subject to changing climate conditions and moderate noise levels.
    Must have excellent communication and people skills.
    Must be able to exercise good judgment in a team environment as well as in aircraft maintenance and safety.
    Must have problem solving and organizational skills.
    Must be able to read and understand company and manufacturer Manuals.
    Must be able to perform all line maintenance functions un-supervised at any time.
    Must own and provide a minimum set of hand tools.
    Benefits:
    STS Mod Center offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

    We know it takes great people to do great work, so if you’re interested in joining the STS Mod Center family, we encourage you to apply on this page. Have questions? Give us a call at 1-800-359-4787.

    Thanks for taking the time, and we look forward to hearing from you soon.
     
    Job Number: 48714
    Job Location: Melbourne, FL
    Input Date: 11/14/2020
    Firm Name: STS AEROSTAFF SERVICES
    Attention: STS Technical Services
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 877/707-5767
    Fax Phone: 877/707-5767
    Website: www.stsaviationgroup.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Lead Systems Engineer

    Description:
    Lead Systems Engineer

    Location: Grand Rapids, MI (49512)

    12 month contract

    The Lead Systems Engineer will demonstrate development of systems architectures and set technical direction to a small team responsible for development and integration of avionics subsystems onto military aircraft platforms. In this role, you will utilize your experience and expertise to solve problems, develop and execute objectives for self and others, and have the ability to effect short-term and long-term business goals.

    8-10 years of experience seems to be the ideal experience for the team. Familiarity of model-based tools and languages is highly desired.


    Essential Responsibilities:
    • Support the full lifecycle of systems development for avionics products including concept design, system architecture, definition and management of requirements, modeling and simulation, managing suppliers, leading teams, managing cost and schedule, sub-system and aircraft integration, verification, and flight testing
    • Interface with customers, partner companies, suppliers, and other senior leadership within the company
    • Work as part of an Integrated multi-company Avionics and Sub-System development team to define, develop, verify and qualify an open systems solutions for military application
    • Lead and participate in technical reviews of military avionics systems across the business
    • Support and coordinate with interfacing organizations such as subsystem avionics product groups and third-party suppliers
    • Provide technical support for the system safety and certification processes for military avionics systems
    • Lead activities such as; failure Investigations, root causes analysis and implementation of corrective actions, lesson learned, issues and design standards updates
    • Provide Engineering support, within one’s specialty, to teams working on performance, cost reduction and quality initiatives
    • Protect the Intellectual Property rights of the Company
    • Develop and implement training modules as necessary

    Qualifications/Requirements:
    • Bachelor’s Degree in Engineering, Physics, Chemistry, Mathematics, or Computer Science from an accredited college or university
    • Minimum 2 years of technical and/or project leadership experience in Military Avionics Systems or related Product design and development
    • Minimum 2 years of experience in Military Avionics Systems and sub-systems requirements definition, design, architecture, integration, verification, and qualification
    • Military Rotorcraft experience

    Desired Characteristics:
    • Model-based systems engineering experience including DoDAF, UML/SysML
    • Prior experience in defining architectures and requirements for Military Avionics Systems
    • Ability to guide and lead others not in a direct reporting relationship
    • Strong technical and project leadership experience in Military Avionics Systems development
    • Experience in sub-system requirements definition for mission systems, displays / crew interface systems, navigation sensors and radios, datalink, autoflight systems, on-board maintenance systems, and integrated surveillance systems
    • Experience with ARINC 661, ARINC 664 and ARINC 653 development standards
    • Experience with DO-178B, DO-254, DO-297, ARP-4754 certification standards
    • Experience using models to simulate and validate the system design and architecture
    • Familiarity with Systems Engineering processes including requirements definition, aircraft integration, flight testing, system safety, and requirements verification
    • Experience in technical and project leadership for large military aircraft programs
    • Strong oral and written communication skills
    • Strong interpersonal and leadership skills
    • Demonstrated ability to analyze and resolve problems
    • Ability to document, plan, market, and execute programs
    • Demonstrated leadership in advancing the state of the art in a technical specialty





    ____________________________________________________________________

    Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
     
    Job Number: 58219
    Job Location: Grand Rapids, MI
    Rate: DOE
    Per Diem: Possible
    Overtime: Possible
    Duration: 12 months
    Start Date: 11/11/19
    Input Date: 11/14/2020
    Firm Name: BUTLER AEROSPACE & DEFENSE
    Attention: Laura Leszek
    Address: SHELTON POINTE STE 204
    2 TRAP FALLS ROAD

    City, State: SHELTON, CT 06484
    Phone: 203/926-2705
    Fax Phone: 203/926-0082
    Website: www.butler.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Lead Systems Engineer (Military Avionics)

    Description:
    Essential Responsibilities:

    • Support the full lifecycle of systems development for avionics products including concept design, system architecture, definition and management of requirements, modeling and simulation, managing suppliers, leading teams, managing cost and schedule, sub-system and aircraft integration, verification, and flight testing

    • Interface with customers, partner companies, suppliers, and other senior leadership within the company

    • Work as part of an Integrated multi-company Avionics and Sub-System development team to define, develop, verify and qualify an open systems solutions for military application

    • Lead and participate in technical reviews of military avionics systems across the business

    • Support and coordinate with interfacing organizations such as subsystem avionics product groups and third-party suppliers

    • Provide technical support for the system safety and certification processes for military avionics systems

    • Lead activities such as; failure Investigations, root causes analysis and implementation of corrective actions, lesson learned, issues and design standards updates

    • Provide Engineering support, within one's specialty, to teams working on performance, cost reduction and quality initiatives

    • Protect the Intellectual Property rights of the Company

    • Develop and implement training modules as necessary


    Qualifications/Requirements:


    • Bachelor's Degree in Engineering, Physics, Chemistry, Mathematics, or Computer Science from an accredited college or university

    • Minimum 2 years of technical and/or project leadership experience in Military Avionics Systems or related Product design and development

    • Minimum 2 years of experience in Military Avionics Systems and sub-systems requirements definition, design, architecture, integration, verification, and qualification

    • Military Rotorcraft experience




    Desired Characteristics:


    • Model-based systems engineering experience including DoDAF, UML/SysML

    • Prior experience in defining architectures and requirements for Military Avionics Systems

    • Ability to guide and lead others not in a direct reporting relationship

    • Strong technical and project leadership experience in Military Avionics Systems development

    • Experience in sub-system requirements definition for mission systems, displays / crew interface systems, navigation sensors and radios, datalink, autoflight systems, on-board maintenance systems, and integrated surveillance systems

    • Experience with ARINC 661, ARINC 664 and ARINC 653 development standards

    • Experience with DO-178B, DO-254, DO-297, ARP-4754 certification standards

    • Experience using models to simulate and validate the system design and architecture

    • Familiarity with Systems Engineering processes including requirements definition, aircraft integration, flight testing, system safety, and requirements verification

    • Experience in technical and project leadership for large military aircraft programs

    • Strong oral and written communication skills

    • Strong interpersonal and leadership skills

    • Demonstrated ability to analyze and resolve problems

    • Ability to document, plan, market, and execute programs

    • Demonstrated leadership in advancing the state of the art in a technical specialty


    Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
     
    Job Number: 19-45254
    Job Location: Grand Rapids, MI
    Rate: 70.0USD/Hour
    Per Diem: --
    Overtime: --
    Duration: 2020-11-10 00:00:00.0
    Start Date: 2019-11-11 00:00:00.0
    Input Date: 11/14/2020
    Firm Name: NESCO RESOURCE
    Attention: Sebastian Hernandez
    Address: 101 COMMERCE ST STE 3001
    City, State: LAKE MARY, FL 32746
    Phone: 407/710-8000
    Fax Phone: 407/710-8001
    Website: www.nescoresource.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Liaison Engineer

    Description:
    POSITION SUMMARY:
    The senior liaison engineer performs design updates, documentation and installation tasks on Transport Category Aircraft for Interior Completion STC projects. The engineer will be the functional focal point on large programs. The engineer will be responsible for creating and revising design data in support of cabin monument build and structural modifications to aircraft primary structure for the installation of interior and external components. The engineer interfaces with internal and external partners and suppliers, procurement, and manufacturing in performing these functions.


    ESSENTIAL JOB FUNCTIONS:
    1. Supports production needs as required when modification questions arise.
    2. Addresses complex production issues related to engineering design.
    3. Acts as the functional lead on large programs, which require multiple liaison engineers.
    4. Revises mechanical designs to aircraft primary or secondary structures for VIP business aircraft.
    5. Revises cabin monument designs for VIP cabins.
    6. Designs repairs for aircraft structure that are beyond the scope of repair documentation
    7. Coordinates with Engineering project leads on redesign efforts
    8. Provides guidance and feedback to other engineering personnel.
    9. Supports the integration of structural and systems installation components within the aircraft configuration.
    10. Ensures designs meet customer criteria, quality standards and FAA requirements.
    11. Achieves established metrics for timely resolution of production issues during the program.
    12. May represent the department during production meetings.
    13. Performs other duties as assigned.


    MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
    1. Bachelor’s Degree in Aerospace or Mechanical Engineering or the equivalent.
    2. Five or more years of experience working in aircraft completions industry on transport category aircraft.

    REQUIRED SKILLS AND ABILITIES:
    1. Computer Aided Drafting/Design (SolidWorks preferred)
    2. Aviation background and aircraft interior experience preferred.
    3. Expert knowledge of mechanical design and documentation standards.
    4. Ability to work independently and cross-functionally.
    5. Strong communication and problem-solving skills.
    6. Strong time management and organizational skills.


    The Structures Company is an AA/EOE.
     
    Job Number: 341
    Job Location: IN
    Rate: $60-$65/Hr. **DOE**
    Per Diem: Yes
    Duration: 12+ Months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Logistics Systems Engineer

    Description:
    Location: Fort Worth, TX
    Rate: $67.41/HR
    Duration: 15 month contract
    Overtime: Possible (x1.5)
    Per Diem Split: Yes (if eligible)

    ****MUST be a U.S. Citizen****
    ****MUST have a Bachelor's Degree****
    ****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

    Job Description:
    1. This position is part of the Systems Engineering organization at our client.
    2. Candidate is needed to fulfill a role in obsolescence management of aircraft components, also known as Diminishing Manufacturing Sources & Material Shortages.
    3. Specifically, tasks will support the F-35 program and involve activities needed to mitigate the effects of obsolescence including last-time buys, lifetime buys, and Bill of Material (BOM) monitoring.
    4. Additional duties will include inventory management and coordination, review and dispositioning of Supplier Data Requirements Lists (SDRLs), generating and briefing Business Case Analyses (BCAs) for parts buys, and developing Contract Data Requirements Lists (CDRLs) to the Customer.
    5. Candidate will be expected to interface and integrate solutions across F-35 Engineering leadership, system/subsystem engineering teams, Supply Chain, Business Management, Program Management, and all associate parties involved in DMSMS for the F-35 program.

    Requirements:
    1. Experience in DMSMS in the Aerospace Industry
    2. Experience in Product Data Management using Teamcenter, Siemens PLM Software portfolio.
    3. Experience in Electrical Engineering or Components Engineering with emphasis upon Mission Systems Integration.
    4. Experience working with Suppliers and/or Supply Chain engagement.
    5. Experience using Microsoft Office tools emphasizing Excel, PowerPoint, and Word.
    6. Experience with written, verbal, and presentation communications skills, including briefing to members of upper management.
    7. Experience in Systems Engineering disciplines with understanding of the total lifecycle (architecture, requirements, design, analysis, integration, verification, production and sustainment) including the following key competencies: Supplier Interface, Proposal Analysis, Risk and Opportunity Assessment.

    Education:
    1. Level 3: BS+9-15 YRS or MS+7-13 YRS
     
    Job Number: 11432
    Job Location: Fort Worth, TX
    Rate: $67.41/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 15 mos
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Maintenance Program Engineer

    Description:
    This position has operational responsibility to the Manager, Services Engineering and functional responsibility to the Heads of Maintenance Engineering within AAECSE.

    ESSENTIAL RESPONSIBILITIES:
    Ensure the development and evolution of maintenance programs by respecting safety requirements and economic considerations for all existing and future programs while balancing conservative design inputs
    Legacy programs (A310, A300-600, A320 Family, A330, A340, A350 and A380 )
    New models and aircraft derivate (NEO, -1000, etc.)
    Guaranty to meet Certification requirements and deadlines
    Cope with widespread technologies
    Ensure timely response to customer queries with good quality
    Ensure that all deliverables (create, revise and publish) are available in due time
    Cope with a steadily increase of workload by maintaining good quality
    Keep close relation with Airworthiness Authorities and the maintenance engineering departments at the other sites
    Provide assistance and advice to Airlines on maintenance programs and maintainability
    Participate and/or chair airline/manufacturer meetings and maintenance working groups
    Ensure transfer of in-service experience to the design offices for new aircraft programs/derivate
    Represent company in operator meetings, and technical and international industry conferences
    Provide maintenance engineering support expertise to other Customer Services divisions, as well as to other directorates (sales, marketing, certification...)
    Carry out and/or manage complex technical matters with impact on safety or economic issues, without close supervision of the upper management level
    Analyze and make synthesis to propose specific letters and documents for top management signature
    Contribute to the establishment of a safe and cost efficient maintenance program
    Ensure timely production and any (customized) evolution of MRBR/MPD in good quality
    Contribute to the development engineering for new aircraft programs with maintainability requirements and verification reducing the maintenance costs
    Contribute to the reduction of cost of ownership
    Contribute to improve the product reliability, maturity and residual value of aircraft
    Contribute to the safe operation of the fleet
    Contribute to an excellent image
    Travel out of the state and/or country for 1-2 weeks per occasion after initial training period.

    Qualified Experience / Skills / Training:
    Previous experience of MSG-3 methodology and familiarity with design and certification process advantageous. General knowledge of Continued & Continuing Airworthiness process beneficial
    Able to critically analyze and challenge design data within the scope of the position
    Customer service focused and able to understand customer needs and answer to their queries and demands
    High interest/experience in working with extensive and highly integrated electronic data processing systems
    Good coordination and relationship skills to deal with customers, partners, airworthiness authorities and other departments; a good team player
    Tenacious, adaptable and flexible while being able to cope with highly demanding environment
    Good presentation and communication skills
    Fluent in English, both oral and written

    Education / Special Qualifications:
    BS in Engineering with at least 3 years of experience, preferably in customer services business (good general knowledge in the design and maintenance of cabin and cargo systems for modern civil aircraft). An advanced degree in engineering preferred.
    www.hi-tecsolutions.com/jobs
     
    Job Number: 1203354
    Job Location: Mobile, AL
    Rate: TBD
    Per Diem: yes
    Overtime: possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
    Attention: Anne Cameron
    Address: P O BOX 965280
    City, State: MARIETTA, GA 30066-0005
    Phone: 770/575-5855
    Fax Phone: 770/575-5856
    Website: www.hi-tecsolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Manufacturing Design Engineer - Hydraulics/Landing Gear

    Description:
    The Design Manufacturing Engineer - Landing Gear and Hydraulics is responsible for all manufacturing aspects of the fabrication and installation of the Landing Gear and Hydraulics systems.

    Duties and Responsibilities:
    1. Manufacturing or directing the manufacturing of detail parts, assemblies, and installations to include.
    2. Take complete ownership of assigned A/C area(s).
    3. Approve all tooling required for assigned A/C area(s) creating new Tooling Requests, performing Root Cause Analysis on Non-conformances generated by tooling, and identifying work-arounds for tooling deficiencies.
    4. Review and approve all Engineering drawings and models for assigned A/C areas, ensuring parts, assemblies, and/ or installations are manufacturable.
    5. Review major Engineering and/or router changes with shop floor at the start of the respective Position.
    6. Create/ revise Master Routers for new/ revised Engineering for assigned A/C areas
    7. Manage all Design for Manufacturability Requests for assigned A/C area(s) reviewing/ creating and approving all internal and external submissions.
    8. Review and approve all CR’s (Change Requests) to determine positive/ negative impacts to Production coordinating with the various departments within Honda Aircraft Company.

    Education, Work Experience, Certification and/or Licensure:
    1. 5+ years structural/ systems Mfg. Engineering experience with the fabrication, assembly, and installation of hydraulics and landing gear details and assemblies
    2. B.S.M.E., B.S.A.E., B.S.I.E., or B.S. Mfg. Eng./ Eng. Tech. preferred, but not required.
    3. Six Sigma Certification a plus.
    4. Experience in sheet metal fabrication a must to include hand, brake, hydro-form, hot forming, hot joggling, super plastic forming, and stretch forming.
    5. Experience with GD&T a must.
    6. Experience in an IPT (Integrated Product Team) format is a plus.
     
    Job Number: 28-002
    Job Location: Greensboro, NC
    Rate: up to $55
    Per Diem: Yes
    Overtime: Yes
    Duration: Long term
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    Manufacturing Engineer

    Description:
    CATIA, aircraft systems
     
    Job Location: Southeast
    Input Date: 11/23/2020
    Firm Name: ADVANCED TECHNOLOGY
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Email: sclark@advancedtechno.com
    Website: www.advancedtechno.com

    Manufacturing Engineer

    Description:
    Aircraft experience, CATIA V5
     
    Job Location: Midwest
    Input Date: 11/23/2020
    Firm Name: ADVANCED TECHNOLOGY
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Email: sclark@advancedtechno.com
    Website: www.advancedtechno.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mass Properties Engineer

    Description:
    The successful candidate shall have experience with Weight and Balance for outfitting of an airplane. Candidate shall have knowledge of the applicable regulations governing weight and balance operations. Experience working within an ODA environment a plus. Experience working with sales a plus. Candidate must have excellent written and verbal skills.

    Education
    • Bachelor’s degree in engineering
    • 5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.

    Essential Functions
    • Contributes to planning, developing and coordinating of important engineering projects
    • Provides specialized technical assistance to team members
    • Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    • Determines and develops own approach to solutions within schedule and cost objectives
    • Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
    • Acts as liaison with representatives outside of the assigned group/area

    Additional Functions
    • Actively works to improve daily processes and ensures all work meets customer requirements
    • Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
     
    Job Number: 28-004
    Job Location: Greensboro, NC
    Rate: $55 - $65/hr
    Per Diem: Yes
    Overtime: Yes
    Duration: 1 Year+
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt Gregory
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mass Properties Engineer

    Description:
    *This is a 1 year, contract position located in FT Worth*



    We are hiring for a mass properties engineer who will be working on military aircraft and factors affecting craft weight, center of gravity, and inertia. The position will be supporting the airframe and systems related configuration change studies areas, performing an ongoing analysis to assure approved changes are fully reflected in aircraft level predictions.



    Required:
    *4 years’ experience working in Mass Properties/Weights engineering
    *strong data analysis, ECOs, working data into databases for analytics
    *Familiar with CATIA and VAS (Visualization Assembly System)
    *Decent computer skills including VB/C++ and SQL
    *Experience using SAWE RP8
    *Ability to apply and gain a Secret Clearance upon starting; US Citizens only please
    *Engineering degree

    Pluses:
    *Knowledge of Earned Value Management Systems (EVMS)
     
    Job Number: 621
    Job Location: Fort Worth, TX
    Per Diem: yes split
    Input Date: 11/14/2020
    Firm Name: CSS STAFFING
    Attention: Tom Clarke
    Address: 263 E MAIN ST 2ND FL STE A
    City, State: NEWARK, DE 19711
    Phone: 302/737-4920
    Website: www.cssstaffing.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Material and Process Engineer

    Description:
    As M&P/Project Engineer at Evacuation Solutions site, the successful candidate must be comfortable working with minimal guidance and have the ability to communicate training and instruction to the engineering Community.
    The engineer should be able to recommend materials and processes, write specifications, ensure compliance of materials with internal, customer, and environmental requirements, conduct failure investigations, write reports, develop and conduct test plans, and support the disposition of materials with quality questions.
    The position requires interfacing with internal and external customers as well as suppliers, strong organizational, verbal and written communication skills, and safe lab working practices.

    Additional typical M&P/Project Responsibilities may include:
    * Collaborates with engineering staff to identify possible chemical or materials engineering related problems.
    * Analyzes, researches, and develops materials and their related fabrication and application processes to develop and optimize materials for use in engineering design of and/or application in structures, systems and subsystems.
    * Performs material analyses that include, but are not limited to, failure analysis, for parts, systems and subsystems, and definition and requirement specifications.
    * Supports the development of project plans, schedules and budgets.
    * Execute tasks aligned with the engineering standard work tool.
    * May be assigned limited responsibility for managing project obligations, such as management of technical documentation package for a product.
    * Manages simple to moderately complex/sized projects including hardware design, testing and processing.
    * Supports the development of project plans, schedules and budgets for projects under his/her responsibility to ensure adherence to the established program plan, schedule, and budget.
    * Maintains and presents plans and progress reports relating to business aspects of the project(s) to track progress and ensure that established targets are met.
    * Identifies and addresses project problems and recommends resolutions to ensure the successful completion of projects.
    * Facilitates project tasks with the various functional organizations to ensure alignment with overall project objectives.

    Basic Qualifications:
    Prior M&P experience preferred.
    Mechanical/Aerospace experience preferred.
    This individual should be considered a technical professional in the development and regulatory approval of aircraft systems.

    Education Requirements:
    Bachelors degree from an accredited institution and three years of prior relevant experience. Engineering degree required. Master's degree in Engineering preferred. In the absence of a degree, 7 years of relevant experience is required.
     
    Job Number: 51746
    Job Location: Phoenix, Az
    Duration: 6 months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: APOLLO PROFESSIONAL SOLUTIONS
    Attention: Rick Nussbaum
    Address: 7310 RITCHIE HWY STE 400
    City, State: GLEN BURNIE, MD 21061-3092
    800 Phone: 866/277-3343
    Website: www.apollopros.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Materials & Process Engineer

    Description:
    We are currently seeking M&P Engineer individuals with a focus in evaluation/processing of composites and adhesive secondary bonding of composites. Also must have ground floor experience and creating methods from scratch.

    Seeking a first rate aircraft materials and processes engineer with experience in composite materials, testing, out-of-autoclave processing, as well as bonded assemblies. The engineer in this role will be expected to fully understand and maintain the materials and processes used. The primary task of this role will be to design and carry-out mechanical testing to support structural analysis of both current and future vehicle builds. This will require consultation and buy-in from stakeholders in various departments so strong interpersonal skills are also necessary. The engineer in this role is expected to be knowledgeable of basic mechanical testing methods, and familiar with composite and paste adhesive properties. An additional task of this role will be to review/write manufacturing procedures and processes to ensure compliance with design specifications.

    Duties:
    • Develop and refine material and process requirements
    • Author materials and processing specifications
    • Author material/joint test plans and their associated reports
    • Review test data and undertake post-testing activities including design allowable calculations, equivalency determinations, and failure mode analysis
    • Review test plans, process specifications, and other documents to ensure compliance with design requirements
    • Confer with stakeholders in Manufacturing, Engineering, and other departments to facilitate production of parts

    Requirements:
    • Bachelor’s degree from an ABET accredited institution, with a concentration in a relevant Materials Engineering / Mechanical Engineering / Structural Engineering discipline
    • Conversant in composite materials and processes used in the manufacture of composite aircraft fuselage and structural components including out-of-autoclave processing and bonded assemblies
    • Experience in authoring / revising materials and process specifications for composite materials
    • Experience in authoring test plans and reports
    • Knowledgable of materials testing and characterization methods
    • Familiarity with industry-accepted statistical analysis methods of treating test data such as those found in CMH17-1
    • A desire to work in a fast-paced work environment with a motivated team
    • Excellent verbal and written communication skills
    • Excellent organizational skills and problem-solving skills
    • Strong team player
    • Excellent computer skills, Microsoft Word, Excel and PowerPoint
    • Experience in stress analysis methods, including the use of hand calcs and FEM is a plus


    The Structures Company is an AA/EOE.
     
    Job Number: 279
    Job Location: Mojave, CA
    Rate: **DOE**
    Per Diem: Yes
    Overtime: Possible
    Duration: 9+ Months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Design Engineer

    Description:
    ****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

    Job Description:
    - Designs and oversee the plant or manufacturing systems, fabrication, installation, modification, maintenance, and repair of mechanical equipment such as conveyor systems, production machinery, and other material-handling equipment used in fabrication, assembly, and other production functions; analyzes engineering sketches, specifications and related data, and drawings to determine design factors such as size, shape, and arrangement of parts; oversees the construction of machine and subassemblies considering such specifications as gear ratios, bearing loads, and direction of moving parts; compiles and analyzes test data to determine effect of design on machines in relation to factors such as temperature, pressures, speed, horsepower, and fuel consumption.

    Basic Qualifications:
    - Experience with 3D parametric modeling and drafting in CATIA or similar tool
    - Experience with Teamcenter or similar PDM/PLM software tool
    - Demonstrated success working in a team-based environment to meet objectives
    - Strong communication and presentation skills, both oral and written
    - Experience with Microsoft office suite (Word, Excel, and PowerPoint)
    - BS in Mechanical Engineering from an accredited university

    Desired skills:
    - Familiarity with C-130 or other similar fixed wing or military aircraft
    - Experience working in an aerospace environment with exposure to DoD customers
    - Experience with ANSI/ASME Y14.100 or similar design and drafting standards
    - Familiarity or experience with ASME Y14.5 Geometric Dimensioning and Tolerancing (GD&T)
    - Experience designing, or working with, sheet metal and machined components
    - Experience with creation, review, and approval of engineering change documentation
    - Experience with an engineering change process and/or configuration control process

    Education:
    - Level 2: BS+3-5 YRS or MS+0-3 YRS
     
    Job Number: 11173
    Job Location: Lexington, KY
    Rate: $50.00 - $63.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 1 yr
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Design Engineer

    Description:
    All candidates must meet the minimum requirements to obtain and maintain a secret clearance which requires US citizenship and a clean criminal history.

    Major purpose:

    Our engineering team consists of a unique blend or designers, analyzers, coders, planners, and managers. We are organized into interdisciplinary teams to solve the challenging technical problems that our diverse customer set provides us.

    Successful candidates for Mechanical Engineer will have a demonstrated ability:



    • Design modifications for special mission aircraft. Such modifications typically include the addition of antennas, structural modifications including cutting stringers, frames, skin panels, and relocating impacted systems.

    • Analyze the impact to the host platform that the design changes cause and use this analysis during the design phase to ensure that the overall impact to airworthiness is minimized.

    • Effectively communicate as part of a multi-disciplinary team working together to ensure that the aircraft systems contribute to the overall success of the program.

    • Knowledge of the airworthiness process is a must and the ability to iterate design approaches with the cognizant airworthiness authorities is critical.



    Education/Experience/Licenses etc.:

    2-4 years BS in Aerospace Engineering, Mechanical Engineering or a related field.

    0-2 years MS Degree in a related field or have 6 years relevant experience.



    We work in the digital age.

    Candidates must be comfortable working with standard MS Office tools as well as have demonstrated experience on a Solid Modeling CAD system and Product Lifecycle Management (PLM) system. Demonstrated experience with solid modeling and Engineering drawing preparation in NX 3D CAD system is mandatory.

    A working knowledge of FEA and experience with TeamCenter PLM is preferred.

    Must have good communication skills and be able to work any shift, weekends and overtime, as required.




    Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

     
     
    Job Number: 19-24132
    Job Location: Tulsa, OK
    Rate: 45.0USD/Hour
    Per Diem: --
    Overtime: --
    Duration: 2020-04-10 00:00:00.0
    Start Date: 2019-07-08 00:00:00.0
    Input Date: 11/14/2020
    Firm Name: NESCO RESOURCE
    Attention: Kevin Lord
    Address: 101 COMMERCE ST STE 3001
    City, State: LAKE MARY, FL 32746
    Phone: 407/710-8000
    Fax Phone: 407/710-8001
    Website: www.nescoresource.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Designer / SECRET CLEARANCE/Solid-works, NX, Catia

    Description:
    Desired Qualifications:
    **Candidate must have an ACTIVE SECRET**
    •Prefer 4+ years of directly related experience
    developing 3D models and detailed drawings
    using either Solid-works or NX, or Catia and AutoCAD
    •Familiarity with aircraft systems or Simulation equipment experience.
     
    Job Number: 658574
    Job Location: mid west
    Rate: competitive
    Per Diem: yes
    Overtime: possible
    Duration: 12 month plus/contract
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: ADVANCED TECHNOLOGY
    Attention: Domenic
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Website: www.advancedtechno.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Engineer (Secret Clearance)

    Description:
    Major purpose:

    Mechanical design, integration, test and production support of simulation equipment. Responsibilities include development of 3D models, detailed drawings and interfacing with manufacturing



    Required:

    Must have an existing, active Secret Security Clearance.

    •BS in Mechanical Engineering or equivalent experience in an engineering discipline

    •Prefer 4+ years of directly related experience

    •Experience developing 3D models and detailed drawings

    •Ability to develop innovative solutions

    •Must have strong verbal and written communication skills with the ability to communicate complex issues to technical and non-technical audiences that include peers, management, and customers



    Desired Qualifications

    •Experience using SolidWorks and AutoCAD

    •Finite Element Analysis application experience

    •Familiarity with aircraft cockpit systems

    •Simulation equipment experienc



    ****Strong SolidWorks experience is required



    Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

     
    Job Number: 19-34863
    Job Location: Broken Arrow, OK
    Rate: 65.0USD/Hour
    Per Diem: --
    Overtime: --
    Duration: 2020-03-06 00:00:00.0
    Start Date: 2019-09-09 00:00:00.0
    Input Date: 11/14/2020
    Firm Name: NESCO RESOURCE
    Attention: Sebastian Hernandez
    Address: 101 COMMERCE ST STE 3001
    City, State: LAKE MARY, FL 32746
    Phone: 407/710-8000
    Fax Phone: 407/710-8001
    Website: www.nescoresource.com

    Mechanical Systems Design Engineer

    Description:
    Aircraft Engineering & Design--

    10+ years of engineering experience with supporting aviation systems; perform layouts and stack ups; have worked in all or most of the following activities:
    -System Engineering
    -Architecture
    -Design
    -Integration
    -Test or requirements activities
    Preferable multi-system knowledge - ECS, hydraulics, mechanics, pilot/flight controls, and propulsion; NX experience preferred

    U.S. Citizen or Permanent Residency Required

    Paid Holidays
    United Healthcare Medical Insurance
    Dental
    Vision
    Direct Deposit
     
    Job Number: 53934
    Job Location: California
    Input Date: 11/23/2020
    Firm Name: BUTLER AEROSPACE & DEFENSE
    Attention: Bernard Barrera
    Address: 2500 REDHILL AVE STE 200
    City, State: SANTA ANA, CA 92705
    Phone: 949/432-7512
    Email: bbarrera@butler.com
    Website: www.butler.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Systems Engineer

    Description:
    POSITION SUMMARY:
    Provides intermediate level engineering drawings related to mechanical systems in support of VIP aircraft completions.

    • 5+ years of experience.
    • BS degree preferred
    • Must have ON THE JOB EXPERIENCE with Solidworks.
    • Preferably 5 years of experience from aircraft completions industry
    • Must have experience designing waste water systems as that carries the most importance.
    • They will be required to contribute on all systems including potable water systems, fire/smoke detection systems and A/C systems within ATA 21, 26, 35 and 38. So experience with any/all of these would be ideal.
    • Must be self-sufficient and NOT require guidance.
    • It is preferred if they have experience with collaborating data in Solidworks.
    • Experience with report writing


    The Structures Company is an AA/EOE.
     
    Job Number: 340
    Job Location: IN
    Rate: $57-$65/Hr. **DOE**
    Per Diem: Yes
    Duration: 6+ Months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Systems Engineer - EBU Experience Needed

    Description:
    Mechanical Systems / Project Engineering experience within the aircraft industry required. Experience with EBU's, Engines and/or Propulsion. Experience integrating wire harnesses, or pneumatics, or Hydraulics, or Ducting, or draining systems into the EBU/Engine. Must have a BS degree. Experience from UTAS/Goodrich/Collins Aerospace would be preferred.



    The Structures Company is an AA/EOE.
     
    Job Number: 337
    Job Location: Tulsa, OK
    Rate: $75/Hr.
    Per Diem: Yes
    Overtime: OT - Some as needed
    Duration: 12-18 Months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mid-Level Mechanical Systems Design Engineer

    Description:
    • Must have experience with 2D and 3d drawings in Catia V5
    • Must have experience with either Aircraft Doors Design, Hydraulic Design, Flight Controls, or Pneumatics



    The Structures Company is an AA/EOE.
     
    Job Number: 338
    Job Location: NC
    Rate: $50-$55/Hr. **DOE**
    Per Diem: Yes
    Overtime: Yes
    Duration: 12+ Months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Powerplant Subsystems Engineer

    Description:
    As the Powerplant Subsystems Engineer you will report to the Director of Propulsion IPT and be responsible for design, development, integration, testing and certification of the powerplant subsystems, including nacelle systems, inlet, thrust reverser, auxiliary power unit (APU), and fire protection for the aircraft.

    • Develop powerplant subsystems design, architecture and product plans, including qualification and certification plans
    • Provide subject matter expert level technical leadership, mentoring and guidance on both practical and theoretical aspects of powerplant subsystems
    • Define requirements for the powerplant subsystems to ensure compliance with regulations and customer requirements
    • Provide validation and verification of powerplant subsystems requirements
    • Perform powerplant subsystems tests and certification, and provide system and certification documentation
    • Manage the powerplant subsystems scheduling, budget, resources and suppliers
    • Report subsystem status to ensure milestones are met in support of the overall program schedule

    Requirements:
    • Minimum of a Bachelor’s Degree in Aerospace, Mechanical Engineering or other relevant Engineering position
    • Master’s degree in a technical and/or management specialty preferred
    • 7+ years of deep, hands-on experience in Powerplant systems development, design and testing in Military, Commercial and/or business jet aircraft



    The Structures Company is an AA/EOE.
     
    Job Number: 346
    Job Location: Reno, NV
    Rate: OPEN - **DOE**
    Per Diem: Yes
    Duration: 12+ Months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Product Engineer

    Description:
    Product Engineer

    Colorado Springs, CO
    $33.38/hr
    12 month W2 contract
    First Shift
    *MUST BE A U.S. CITIZEN OR PERMANENT RESIDENT*
    **NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

    Description:
    Product Engineer - Responsible for mid to high complexity projects with high complexity related to general engineering and technical process improvements.

    Additional:
    * Provides experienced sustaining engineering support to aircraft manufacturers, and other aftermarket customers.
    * Provides experienced engineering support for operations, supply chain, quality, technical publications and program management.
    * Provides sustaining engineering support to airlines and other aftermarket customers.
    * Provides engineering support for operations, supply chain, quality, technical publications and program management.
    * Updates engineering documentation through Engineering change orders and Document Change notices.
    * Communicates with internal and external customers on a regular basis.
    * Leads teams through problem investigation and solution/design approaches as well as continuous improvement efforts.
    * Provides root cause and corrective action investigations.
    * Direct interface with external customers on engineering issue resolution and product improvements.
    * Supports after hours Aircraft On Ground (AOG) airline/OEM requests as experience and knowledge is obtained.
    * Supports Material Review Board (MRB) evaluation and disposition.
    * Ensures quality product utilizing Company quality procedures.
    * Audits work area for safety compliance.
    * Adheres to all Company rules and codes of conduct.

    -Bachelors degree required
     
    Job Number: 11663
    Job Location: Colorado Springs, CO
    Rate: 33.38
    Per Diem: No
    Overtime: Possible
    Duration: 1 year
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Product Engineer (Aircraft)

    Description:
    The Product Engineer will be responsible for mid to high complexity projects with high complexity-related to general engineering and technical process improvements.

    They will:
    • Provide experienced sustaining engineering support to aircraft manufacturers, and other aftermarket customers.
    • Provide experienced engineering support for operations, supply chain, quality, technical publications and program management.
    • Provide sustaining engineering support to airlines and other aftermarket customers.
    • Update engineering documentation through Engineering change orders and Document Change notices.
    • Communicate with internal and external customers on a regular basis.
    • Lead teams through problem investigation and solution/design approaches as well as continuous improvement efforts.
    • Provide root cause and corrective action investigations.
    • Have direct interface with external customers on engineering issue resolutions and product improvements.
    • Support after hours Aircraft On Ground (AOG) airline/OEM requests as experience and knowledge is obtained
    • Support Material Review Board (MRB) evaluation and disposition.
    • Ensure quality products utilizing company quality procedures.
    • Audit work areas for safety compliance.
    • Adhere to all company rules and codes of conduct.

    Education
    Bachelor of Science - STEM, Mechanical or Aerospace Engineer, General Engineering, Engineering Physics, or similar.
     
    Job Number: 1910107491
    Job Location: CO Springs, CO
    Per Diem: split
    Overtime: possible
    Duration: 1 year
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Stephanie Spolzino
    Address: 50 FOUNDERS PLAZA STE 304
    City, State: EAST HARTFORD, CT 06108
    Phone: 860/289-2643
    800 Phone: 866/636-4723
    Fax Phone: 800/556-5284
    Website: www.pdstech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Production Stress Analysis Engineer (Tulsa, OK)

    Description:
    • Contributes to planning, developing and coordinating of important engineering projects
    • Must have some MRB experience in support of a/c structural repairs.
    • Provides specialized technical assistance to team members
    • Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    • Determines and develops own approach to solutions within schedule and cost objectives
    • Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
    • Acts as liaison with representatives outside of the assigned group/area Additional Functions

    UNIQUE SKILLS
    • At least 10 years of detailed stress analysis experience on primary aircraft structures.
    • Must have some experience in fatigue analysis on aircraft structure.
    • Must have some MRB experience in support of a/c structural repairs
    • Experience utilizing FEM. CATIA V5 experience is a plus.

    EXPERIENCE/EDUCATION
    • Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    • 5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
    • Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
     
    Job Number: 24-304
    Job Location: Tulsa, OK
    Rate: $70-$79
    Per Diem: Yes
    Overtime: Yes
    Duration: 1 Year Plus
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt Gregory
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Project Engineer

    Description:
    We have a great opportunity for our client's Propulsion group!

    Duration – 9-12 months
    Exempt position (salary)
    Pate Rate: Open

    Experience:
    Must have system level engineering experience on engine installations.
    Turbo Prop install experience is preferable, but not mandatory.
    Must have a BS degree (BSAE, BSME).
    System testing required for PDR.
    Experience with engine installation into aircraft for PDR.
    Spec out system parts.
    Coordinate/support manufacturing.
    Select and manage suppliers.
    Some experience with CAD software like Catia V5, UG NX, etc.
    Experience doing thermal analysis of engine installations.
    US Citizen or permanent resident.
     
    Job Location: Manassas, VA
    Rate: Open
    Per Diem: Split
    Duration: 12+ mos
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Tara Gilbert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Project Planner - no clearance SC

    Description:
    Job Title: Project Planner

    Work Site Address: Greenville, SC 29605
    Job Number: 2245-1
    Max Pay Rate: $25.00/hr
    Start Date: 10/22/2019
    End Date: 10/23/2020
    Position Type: Contract

    The manager is looking for candidates with specific experience writing technical manuals and or work instructions.

    The person that fills this role will be responsible for creating a work manual for building a new aircraft step by step from start to finish.

    Previous aircraft experience is preferred but not required.

    Requirements:
    • MUST have demonstrated experience in writing technical work instructions
    • Critical to have Project Planning experience (planning being writing detailed work instructions)
    • Preferred to have aircraft experience (i.e. F-16, P-3, C-130, C-5, etc)


    This manager is very responsive and looking to fill this role immediately.



    Job Summary:
    Plans sequence of fabrication, assembly, installation, and other manufacturing operations relating to specific portion of the product for guidance of production workers.

    Plans detail operations from blueprints, engineering orders, change notices, and other engineering releases. Determines the need for tooling and makes recommendations for the design and planning of required tools. Prepares shop work orders for materials and product processing and coordinates with schedulers to ensure that items are being processed according to specifications and time requirements. Maintains progress reports, schedules, and other related records.
    Writes, in clear and concise language, such technical documents as aircraft work documents and work instructions related technical publications concerned with installation, operation, and maintenance of electronic, electrical, mechanical, and other equipment. Includes writing such technical documentation as operational specifications, bulletins, articles, and marketing publications. Acquires or verifies knowledge of subject by interviewing workers engaged in developing new products and services or in making improvements, observing performance of experiments and methods of production, referring to blueprints, sketches, engineering drawings and notes, bulletins, manuals, or similar publications.


    Skills: Category Name Required Importance Experience
    Soft Skills Planning and Organizing Skills No 6
    Technical Skills Ability to write technical documents and end-user documentation Yes 9
    Technical Skills Demonstrate Technical and Creative Skills No 5
    Technical Skills Process Planning No 7
    Technical Skills Project Planning No 8
    Technical Skills Technical Writing No 6


    Qty 1 position
     
    Job Number: JEG-2245-1
    Job Location: Greenville, SC
    Rate: 25/hr max
    Duration: 12 months
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    RMS (Reliability, Maintainability, Safety) Engineer

    Description:
    JSG is hiring a RMS (Reliability, Maintainability, Safety)Engineer for a 15+ months contract opportunity in Shelton, CT!

    Description:

    Interface with Logistics Support Analysts, NAVAIR Supportability and CH-53K Design IPTs & GSE Design Engineering to review LORA defined Intermediate and Depot Maintenance tasks to understand support equipment requirements; acceptance inspection, operational checkout, disassembly, cleaning, inspection, repair/replacement, assembly, and test.

    Refer to the Companys Aircraft Maintainability System SAMS Data Base to review Organizational, Intermediate, & Depot Maintenance Task Analysis for the various systems on components on the CH-53K.
    Review Supplier SDRLs upon receipt to understand supplier recommendations for Intermediate & Depot maintenance support equipment requirements.
    Review existing production tooling for Client manufactured components for application for Intermediate and Depot Level Maintenance tasks.
    Working with NAVAIR Lakehurst & NAVAIR Supportability, determine if existing peculiar and common support equipment in NAVAIR/DOD Inventory can support CH-53K Organizational, Intermediate, & Depot Maintenance Tasks.
    Prepare tracking files that identify support equipment that is required for each maintenance task for a system or component. The tracking files will track all peculiar & common support equipment identified.
    Using the SAMs Data Base, prepare Peculiar Support Equipment CDRLs (SERDS Support Equipment Requirements Data) for Peculiar Support Equipment (PSE) required to support Organizational, Intermediate, & Depot Maintenance Requirements.
    Create and manage lists to ensure proposal responses are accurate to approved maintenance plans.

    PREFERRED EXPERIENCE:

    A Federal Aviation Administration (FAA) Airframe/Powerplant certification is desired.
    Demonstrated knowledge on various types of aviation related ground support equipment is desired.
    Naval Aviation Maintenance Program (NAMP) experience in a Depot/Overhaul Repair facility.
    Strong Microsoft Excel and Word experience.
     
    Job Number: 375755
    Job Location: Shelton, CT
    Per Diem: Possibly
    Overtime: Possibly
    Duration: 15+ Months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Linda Peck
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Real Time Software Engineer(Active Secret Clearance)

    Description:
    Leads activities to develop, document and maintain architectures, requirements, algorithms, interfaces and designs for software systems. Leads development of code and integration of complex software components into a fully functional software system.
    Develops software verification plans, test procedures and test environments, executing the test procedures and documenting test results to ensure software system requirements are met. Provides technical leadership for software projects and leads software supplier management activities. Leads development, selection, tailoring and deployment of processes, tools and metrics. Plans, executes and documents software research and development projects. Serves as a subject matter expert for software domains, system-specific issues, processes and regulations. Tracks and evaluates software team and supplier performance to ensure product and process conformance to project plans and industry standards.
    • Aircraft and Avionics systems Domain knowledge
    • Real-time Embedded Software Development
    • Experienced with C++, ADA, and other programming languages
    • GreenHills, ADACore, VxWorks, Visual Studio development environment
    • Knowledge of one at least few of these tools: DOORS, Clearcase, ClearQuest, Git, VersionOne, JIRA
     
    Job Number: RTSE_OK
    Job Location: Oklahoma City,, OK
    Rate: DOE
    Per Diem: Possible
    Overtime: Possible
    Duration: 12 mon
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: AMERICAN CYBERSYSTEMS
    Attention: Vibhas Sadhu
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.acsicorp.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Requirements Engineer - Aircraft Display Systems - China

    Description:
    Requirements Engineer - Aircraft Display Systems - China

    Our Client based in China require support working on their latest display systems. Their domain is Avionic Systems. The Display System level Safety Work will involve revising Requirements developing system requirements for FDAS, Synoptic, and FDAS architecture /Architecture documentation to bring it into a certifiable level as well as other tasks and responsibilities. 

    Role:

    The successful Engineer will deliver updated Architecture, Requirements and associated analysis, supporting the program towards certification. Windchill is used for document storage.

    Experience & Qualifications:

    Degree Qualified Engineer with good strong systems knowledge 10 
    years +. Good Requirements knowledge and/ or displays experience.

    Candidates should be prepared to work in China . This position will be offered on a contract basis.
     
    Job Number: BH-68-3
    Job Location: Shanghai, China
    Rate: Good Package / Rate - Negotiable
    Per Diem: --
    Overtime: --
    Start Date: 10/24/2019
    Input Date: 11/14/2020
    Firm Name: STRONGFIELD TECHNOLOGIES USA INC
    Attention: Graham Bird
    Address: 5000 BIRCH ST STE 3000
    City, State: NEWPORT BEACH, CA 92660
    Website: www.strongfield.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    SYSTEMS INTEGRATION AND TEST ENGINEER - Clearance CA

    Description:
    165400 Job Title: Systems Engineer

    Work Site Address: Palmdale, CA 93599
    Job Number: 1475-1
    Max Pay Rate: $75.00/hr
    Start Date: 4/15/2019
    End Date: 10/31/2019
    Position Type: Contract


    Job Summary:
    Looking for world class talent in SYSTEMS INTEGRATION AND TEST ENGINEERING to be a part of a team that will carry on our tradition making history in advanced aircraft development. Candidate will support a team responsible for the integration and test of Mission Systems capabilities and functions in a laboratory, flying test bed, and flight test environment. Utilizing mission systems requirements, the candidate will assist in the development of test requirements and procedures, execute integration and test activities in a lab environment, evaluate mission systems functionality in a flying test bed, and support mission systems flight test evaluation. Candidate must have strong technical background, excellent communication and interpersonal skills, in-depth understanding of military aircraft functionality, and demonstrated integration and test experience with a modern software intensive mission systems architecture.


    Roles and Responsibilities
    Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems. Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications.

    Qualifications and Education Requirements
    BS+9-15 YRS or MS+7-13 YRS
    Bachelor's or above in a Technical Engineering Discipline

    Preferred Skills
    Skills Needed:
    • Read Engineering Drawings and Parts List
    • Capture data digitally from parts lists and excel spreadsheets to form new lists
    • Conduct meetings for changes to hardware allocations, tracking and reporting
    • Project Planning, Architecture, Functional Allocations
    • MS Excel, linking and pivot tables
    Attributes
    • Good attitude about work and working with others
    • Attention to detail
    • Good communication skills
    • Team player
    • Initiative and ability to work
    • Passion for detail and getting the job done in a timely fashion
    • RF Testing experience
    • Experience with harness design and fabrication
    • Experience with hardware configuration management

    Qty 5 positions needed
    This position is located at a facility that requires special access.
    Manager will consider both 2 and 3 level candidates.
    Will accept experience in lieu of degree
    Must have Aviation/Aerospace experience
    Experience Writing/Testing/Integrating/Developing Software for Embedded and C++ required
     
    Job Number: JE-1475-1S
    Job Location: Palmdale, CA
    Rate: 75/hr max
    Duration: 6 months +
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Senior Avionics Engineers

    Description:
    Details
    • Integrate Avionic Systems
    • Establish requirements
    • Be responsible for system design and architecture
    • Interact directly with suppliers
    • Provide technical leadership, mentoring and guidance
    • Define traceability to the FARs
    • Be responsible for validation and verification of requirements
    • Be responsible for system test and certification
    • Report Status
    • Manage and track mass properties of Avionic Systems during the complete design cycle
    • Provide expert level guidance on both practical and theoretical aspects of the Avionic Systems design
    • Provide support for engineering, certification, and flight test departments from concept to product certification
    • Foster a culture that inspires high levels of performance and employee retention
    We're looking for someone who has:
    • Bachelor’s degree in relevant field
    • 5+ years of experience within the Avionics discipline
    • Experience working on aircraft development programs
    • Experience with Avionic Systems design and integration
    • Demonstrated success developing processes
    • Good understanding of Systems Engineering
    • Familiarity with Part 25, ARP 4754A, DO-160, DO-178 and DO-254 is preferred.
    • A strong familiarity with Honeywell Primus EPIC avionics system is a plus but certainly not required.
     
    Job Location: Reno, NV
    Rate: DOE
    Per Diem: Possible
    Overtime: Possible
    Duration: Temp to Perm
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Tara Gilbert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Senior Engineer - Cockpit Display Systems - China.

    Description:
    Senior Engineer - Cockpit Display Systems - China.

    Our client requires a Senior Engineer to support the design and development of their new Cockpit Displays System for Civil Aircraft.

    We seek Engineers with strong knowledge and experience of working on modern cockpit display systems. Good knowledge of ARINC 661. The selected Engineer must be prepared to work in China. They must be a good communicator and will be an important part of our Client's team.

    Role duties and Responsibilities:

    :

    •  Technical lead to define a competitive CDS solution, update plans and process for a new part 25 civil program.
    • Experience on ARINC 661 standard, A661 server and widget design (including requirement and architecture) for cockpit display system.
    • Interface with customers and act as a technical domain expert on Display eco-system.
    • Provide supplier oversight and technical issues resolution with existing CDS program.
    • Support the establishment/update of sound system/module requirements capture and development processes, system design process, methods and concepts.
    • Document related technical data of assigned projects in conformance with engineering policies and procedures.
    • Conduct architecture activities at appropriate system/module levels.
    • Integrate processes across functional areas to improve coordination and maximize efficiency.
    • Help to make significant decisions and recommendations on complex issues to achieve long-term results and strategic objectives.
    • Execute design, analysis, and evaluation of assigned projects adhering to business standards, practices, procedures, and product/program requirements, manage corresponding project schedules and costs.
    • Provide training to engineers on system design process, methods and concepts.

     
    Job Number: BH-218-1
    Job Location: China, China
    Rate: Contract hourly rate negotiable in US$
    Per Diem: --
    Overtime: --
    Start Date: 10/24/2019
    Input Date: 11/14/2020
    Firm Name: STRONGFIELD TECHNOLOGIES USA INC
    Attention: Graham Bird
    Address: 5000 BIRCH ST STE 3000
    City, State: NEWPORT BEACH, CA 92660
    Website: www.strongfield.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Senior Principal Composite Structural Design Engineer (Secret Clearance)

    Description:
    • Candidate will be responsible for structural design of primary and secondary composite and metallic aircraft structural parts and assemblies for both new and existing aircraft.
    • Candidate will work within an Integrated Product Team (IPT) environment, interfacing with IPT leadership, suppliers, customers, and other technical disciplines.
    • Proficiency with the NX-TeamCenter tool suite and the ability to independently prepare and lead the preparation of product build packages is essential.

    Candidate may participate in on-site support at product manufacturing and integration sites.

    Basic Qualifications:
    • 9 Years with Bachelors in Science; 7 Years with Masters; 4 Years with PhD. (Will consider years of experience/education in lieu of degree).
    • Experience designing composite aircraft primary structure.
    • U.S. Citizenship is required.
    • Active Secret Clearance required.
    • The ability to obtain and maintain access to Special Programs.

    Preferred Qualifications:
    • Bachelor of Science degree in STEM.
    • Proficiency with NX solid modeling software.
    • Proficiency with TeamCenter PLM software.
    • Proficiency with FiberSim composite definition software.
     
    Job Number: 1910104505
    Job Location: Melbourne, FL
    Per Diem: split
    Overtime: possible
    Duration: 1 year
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Stephanie Spolzino
    Address: 50 FOUNDERS PLAZA STE 304
    City, State: EAST HARTFORD, CT 06108
    Phone: 860/289-2643
    800 Phone: 866/636-4723
    Fax Phone: 800/556-5284
    Website: www.pdstech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Sheet Metal Mechanic / C-130 modification experience required URGENT SC

    Description:
    166687
    Job Title: Sheet Metal Mechanic

    Work Site Address: Greenville, SC 29605
    Job Number: 2463-1
    Max Pay Rate: $33.83/hr
    Start Date: 11/18/2019
    End Date: 7/31/2020
    Position Type: Contract

    Job Summary:
    Plans, lays out, fabricates, assembles, installs, and repairs both internal and external aircraft structures and surfaces for aircraft modification in accordance with technical manuals, engineering drawings, and FAA regulations.

    Qualifications and Education Requirements
    C-130H Experience
    Modification Experience

    Skills: Category Name Required Importance Experience
    Areas of Expertise Aircraft Modification No 2 2 - 4 Years
    Areas of Expertise C-130H No 1 4 - 6 Years

    Qty 3 positions
    This is an URGENT requirement.
     
    Job Number: JEG-2463-1
    Job Location: Greenville, SC
    Rate: 33.68/hr max
    Duration: 8 months
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Software Engineer

    Description:
    Software Engineer

    Fort Worth, TX
    $69/hr
    15 month W2 contract
    First Shift
    *MUST HAVE AN ACTIVE SECRET CLEARANCE*

    Description:
    Real-Time Simulation Software Engineer working on the F-35 Shared Simulation Software team. You will be part of the highly innovative Labs & Technical Services (L&TS) organization, responsible for developing and maintaining manned aircraft weapon simulation systems utilized for weapons systems development from concept design through production and delivery. Within L&TS resides an extensive selection of simulators and software/systems integration test capabilities, including low-cost rapid prototyping concept development systems, full-dome handling qualities simulations, high-fidelity multi-ship, real-time, man-in-the-loop simulation systems, and hardware-in-the-loop mission systems and vehicle systems integration venues. Our products are used to advance weapon systems development, strengthen pilot familiarization, assess human factors, evaluate aircraft control laws, improve mission study effectiveness, provide test capabilities required for contract verification and provide integration testing and verification capabilities for aircraft systems and software.

    * Bachelor's degree in an Engineering/Technical Field
    * Experience with Real-time simulation software development
    * Experience with Aircraft Avionics Sensors - EO/IR (Electro-Optical/Infrared)
    * Experience with C++ programming

    Skill Matrix: (not required)
    Software design and development
    C++ - Advanced Level
    C++ - Intermediate Level
    Modeling
    Real Time
    Simulation
    Software design principles
     
    Job Number: 11834
    Job Location: Fort Worth, TX
    Rate: 69.00
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 15 months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Software Engineer

    Description:
    Software Engineer

    Fort Worth, TX
    $65/hr
    15 month W2 contract
    First Shift
    *MUST HAVE AN ACTIVE SECRET CLEARANCE*

    Description:
    Real-Time Simulation Software Engineer working on the F-35 Shared Simulation Software team. You will be part of the highly innovative Labs & Technical Services (L&TS) organization, responsible for developing and maintaining manned aircraft weapon simulation systems utilized for weapons systems development from concept design through production and delivery. Within L&TS resides an extensive selection of simulators and software/systems integration test capabilities, including low-cost rapid prototyping concept development systems, full-dome handling qualities simulations, high-fidelity multi-ship, real-time, man-in-the-loop simulation systems, and hardware-in-the-loop mission systems and vehicle systems integration venues. Our products are used to advance weapon systems development, strengthen pilot familiarization, assess human factors, evaluate aircraft control laws, improve mission study effectiveness, provide test capabilities required for contract verification and provide integration testing and verification capabilities for aircraft systems and software.
    * Experience in one or more areas related to simulation software, e.g. real-time executives, modeling and simulation, visual systems, data management, analysis systems, etc.
    * Experience with C++ programming language
    * Experience with Object-Oriented Analysis (OOA) / Object-Oriented Design (OOD) techniques
    * Bachelor's degree in an Engineering/Technical Field
    * Experience with software in a highly integration-intensive environment
    * Experience with Aircraft Avionics Sensors - Electronic Warefare (EW), Electronic Support Measures (ESM), RADAR, Distributed Aperature System (DAS), Electro-Optical Targeting System (EOTS)
    * Strong data analytics experience
    * Experience with Agile software development methodologies and tools, such as VersionOne
    * Experience with Linux operating systems

    Skill Matrix:
    Software design and development
    C++ - Advanced Level
    C++ - Intermediate Level
    Modeling
    Real Time
    Simulation
    Software design principles
     
    Job Number: 11826
    Job Location: Fort Worth, TX
    Rate: 65.00
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 15 months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Software Engineer

    Description:
    Software Engineer

    Marietta, GA
    $72/hr
    15 month W2 contract
    First Shift
    *MUST HAVE AN ACTIVE SECRET CLEARANCE*

    Description:
    Will become a technical staff member for laboratory software development and run-time simulation computing environments for the LM Aero Simulation and Systems Integration Laboratories (SimSIL). This organization develops state of the art, real-time, pilot-in-the-loop fighter and airlift simulations and systems integration laboratories. This includes simulators for the F-22, F-35, C-5, C-130J Aircraft. As part of the Simulation and System Integration Labs (SimSIL) organization, the candidate will provide computer and network support for Windows, Linux and Solaris Operating Systems, and be able to assist other developers, modelers and integrators working on these systems and run-time systems.
    Security+ CE Certification
    Experience with software development.
    Experience with Windows, Linux and Solaris operating systems.
    Experience configuring computer systems and software.
    Bachelor's degree in an Engineering/Technical field.

    Skill Matrix: (none required)
    Information Security
    Local/Wide Area Networks
    Mainframe Servers
    Solaris
    Intel Hardware/Servers Install
    IT Security Administration
    Unix Administrator
     
    Job Number: 11825
    Job Location: Marietta, GA
    Rate: 72.00
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 15 months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Software Engineer

    Description:
    Software Engineer

    Fort Worth, TX
    $70/hr
    15 month W2 contract
    First Shift
    *MUST HAVE AN ACTIVE SECRET CLEARANCE*

    Description:
    will be a technical staff member for laboratory software development within the LM Aero Labs and Technical Services (L&TS) Simulation Team. This organization develops state of the art, real-time, pilot-in-the-loop fighter and airlift simulations and systems integration laboratories. This includes simulators for the F-16, F-22, F-35, C-5, C-130J, and L-100 aircraft. Our products are used to advance weapon systems development, strengthen pilot familiarization, assess human factors, evaluate aircraft control laws, improve mission study effectiveness, provide test capabilities required for contract verification and provide integration testing and verification capabilities for aircraft systems and software. Software will be developed for Linux, Windows, or Solaris platforms. Selected candidate may operate and maintain existing laboratory venues. Assignments may change over time as required by the organization. Initial assignment will likely involve development, integration, documentation, test and debugging of airframe, aircraft system and avionics software models that contain logical and mathematical solutions for experimental, developmental and production aircraft in computer languages for solutions by means of data processing. Must be able to apply the appropriate standards, processes, procedures and tools throughout the development life cycle, locate and correct programing errors, prepare operating instructions, compile documentation of program development, and analyze system capabilities.
    - Domain knowledge in one or more of the following:
    EOM, Flight dynamics, Flight controls, Propulsion, U&S, RADAR, EW, CNI, EO/IR, SMS, Datalink, INS, GPS, Fire Control, PVI, Mission Planning, Sensor fusion, OFP functionality, Multi-spectral databases, Signature modeling, EO/IR environment, RF environment, Natural environment, Weapons, Expendables, Computer-generated forces, Integrated Air Defense Systems, Endgame modeling, Probability of removal/kill, Antenna patterns, Aircraft entities, Surface entities, Real-Time Computing Methodologies, HW/SW I/O interfaces, Modeling and Simulation
    -Experience developing software in a high order languages (C, C++, Java and/or ADA)

    Skill Matrix: (not required)
    ADA
    Java
    Javascript
    C++-Intermediate Level
    UNIX
     
    Job Number: 11830
    Job Location: Fort Worth, TX
    Rate: 70.00
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 15 months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Software Engineer

    Description:
    Software Engineer

    Marietta, GA
    $66/hr
    15 month W2 contract
    First Shift
    *MUST HAVE AN ACTIVE SECRET CLEARANCE*

    Description:
    The Software Engineer will be a technical staff member for laboratory software development within the LM Aero Labs and Technical Services (L&TS) Simulation Team. This organization develops state of the art, real-time, pilot-in-the-loop fighter and airlift simulations and systems integration laboratories. This includes simulators for the F-16, F-22, F-35, C-5, C-130J, and L-100 aircraft. Software will be developed for Linux, Windows, or Solaris platforms. Selected candidate may operate and maintain existing laboratory venues. Assignments may change over time as required by the organization. Initial assignment will likely involve development, integration, documentation, test and debugging of airframe, aircraft system and avionics software models that contain logical and mathematical solutions for experimental, developmental and production aircraft in computer languages for solutions by means of data processing. Must be able to apply the appropriate standards, processes, procedures and tools throughout the development life cycle, locate and correct programing errors, prepare operating instructions, compile documentation of program development, and analyze system capabilities.


    Bachelor of Science in an Engineering discipline or another technically related discipline from an accredited university.
    -Experience in the use of Windows and Unix Operating Systems.
    -4+ years experience of software development in high order languages (C++, Java and/or Ada).
    -Experience with software development tools and processes
    - Experience (2 years or more) with at least one Infrared sensor or knowledge of the IR environment
     
    Job Number: 11787
    Job Location: Marietta, GA
    Rate: 66.00
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 15 months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Software Engineer (Active clearance)

    Description:
    The Software Engineer will be a technical staff member for laboratory software development within the LM Aero Labs and Technical Services (L&TS) Simulation Team. This organization develops state of the art, real-time, pilot-in-the-loop fighter and airlift simulations and systems integration laboratories. This includes simulators for the F-16, F-22, F-35, C-5, C-130J, and L-100 aircraft. Software will be developed for Linux, Windows, or Solaris platforms. Selected candidate may operate and maintain existing laboratory venues. Assignments may change over time as required by the organization. Initial assignment will likely involve development, integration, documentation, test and debugging of airframe, aircraft system and avionics software models that contain logical and mathematical solutions for experimental, developmental and production aircraft in computer languages for solutions by means of data processing. Must be able to apply the appropriate standards, processes, procedures and tools throughout the development life cycle, locate and correct programing errors, prepare operating instructions, compile documentation of program development, and analyze system capabilities.
    Bachelor of Science in an Engineering discipline or another technically related discipline from an accredited university.
    -Experience in the use of Windows and Unix Operating Systems.
    -4+ years experience of software development in high order languages (C++, Java and/or Ada).
    -Experience with software development tools and processes
    - Experience (2 years or more) with at least one Infrared sensor or knowledge of the IR environment
     
    Job Location: Marietta, GA
    Rate: 66/hr
    Per Diem: Split
    Input Date: 11/14/2020
    Firm Name: GLOBAL CONTRACT PROFESSIONALS
    Attention: Sanjay Khatri
    Address: P O BOX 161127
    City, State: FORT WORTH, TX 76161-1127
    Phone: 817/847-6673
    800 Phone: 800/942-2376
    Fax Phone: 817/847-9444
    Website: www.teamglobal.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Software Engineer - Clearance TX

    Description:
    166452 Job Title: Software Engineer

    Work Site Address: Fort Worth, TX 76108
    Job Number: 2165-1
    Max Pay Rate: $103.70/hr
    Start Date: 10/15/2019
    End Date: 1/15/2021
    Position Type: Contract

    Job Summary:
    Looking for world class talent in Software Engineering to be a part of a team that will carry on our 75 year tradition making history in advanced aircraft development.
    This position is with the Advanced Development Programs Software Systems group in Fort Worth, TX. This position requires an experienced software engineer to be a part of a strong software development team. The team uses a wide application of modern technical principles, theories, and concepts in the software field to develop, integrate, and test open mission systems software products that can be applied to air and ground based systems.

    The candidate will be responsible for all phases of developing software. Candidate responsibilities will span the technology development lifecycle, including requirements generation, system and software design and implementation, integration and flight test, and adjudicating change requests as the software is updated, tested, and integrated. Integration activities will include a multitude of host systems, such as live assets of varying capability and structure, simulated systems, and laboratory environments that include constructive simulations, physical hardware, and system simulations.
    The successful candidate will lead a high-performing multi-site, multi-program team and must be self-motivated with a strong work ethic, time-management, and interpersonal skills. The successful candidate must have demonstrated effective communication skills as the position will require frequent inter-organizational and outside customer interactions. The ability to travel on occasion for team interaction and integration and test activities is required.

    Qualifications and Education Requirements
    BS+6-10 YRS or MS+4-8 YRS
    STEM Degree
    The successful candidate will need to pass a security screening before interview.
    Demonstrated leadership experience is required. Experience with C/C++ is required. Experience with XML based open standards, modular open mission systems architectures, Common Software Baseline processes, and Agile processes and tools is highly desired. The candidate must have experience with all phases of the Software Engineering Process from requirements generation, through development, integration, and test. In addition, recent work experience with embedded architectures, single board computers, hardware and software in the loop implementation and testing, and F-35 Mission Systems Software is a plus.

    Desired Skills
    C and Java languages
    XML knowledge
    Service Oriented Architecture Knowledge
    Object Oriented Analysis and Design
    Object Oriented Programming
    Agile Software Development
    Linux and Windows Operating Systems
    Message Broker Technology (e.g. Active MQ)
    UML tools (e.g. Rational Rose, Rhapsody)
    Configuration Management Systems (e.g. Git)
    Agile Process Tools (e.g. Version One)
    Software Development Tools (e.g. Visual Studio, Eclipse)
    Atlassian Tools (e.g. Stash, Jira)
    Continuous Integration (e.g. Jenkins, Bamboo)
    Requirements generation and system interface development
    System test and Integration experience
    UCI Knowledge
    Modular Open Mission Systems Development
    Mission Systems and Battle Management Knowledge

    Preferred Skills
    Skills: Category Name Required Importance Experience
    Software Skills C++ - Expert Level No 1 4 - 6 Years


    Qty 1 position
     
    Job Number: JE-2165-1TS
    Job Location: Fort Worth, TX
    Rate: 103.70/hr max
    Per Diem: pd split possible
    Duration: 15 months
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    Sr Systems Engineer

    Description:
    Aircraft Engineering & Design--

    Candidates should be able to demonstrate the ability to write requirements, DOORS exp; will need to have certification and testing experience; DO-160 experience preferred; solid understanding of systems engineering in a large aerospace environment

    U.S. Citizen or Permanent Residency Required

    Paid Holidays
    United Healthcare Medical Insurance
    Dental
    Vision
    Direct Deposit
     
    Job Number: 54094
    Job Location: California
    Input Date: 11/23/2020
    Firm Name: BUTLER AEROSPACE & DEFENSE
    Attention: Bernard Barrera
    Address: 2500 REDHILL AVE STE 200
    City, State: SANTA ANA, CA 92705
    Phone: 949/432-7512
    Email: bbarrera@butler.com
    Website: www.butler.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Sr. Avionics Engineer

    Description:
    • Integrate Avionic Systems
    • Establish requirements
    • Be responsible for system design and architecture
    • Interact directly with suppliers
    • Provide technical leadership, mentoring and guidance
    • Define traceability to the FARs
    • Be responsible for validation and verification of requirements
    • Be responsible for system test and certification
    • Report Status
    • Manage and track mass properties of Avionic Systems during the complete design cycle
    • Provide expert level guidance on both practical and theoretical aspects of the Avionic Systems design
    • Provide support for engineering, certification, and flight test departments from concept to product certification
    • Foster a culture that inspires high levels of performance and employee retention



    We're looking for someone who has:
    • Bachelor’s degree in relevant field
    • 5+ years of experience within the Avionics discipline
    • Experience working on aircraft development programs
    • Experience with Avionic Systems design and integration
    • Demonstrated success developing processes
    • Good understanding of Systems Engineering
    • Familiarity with Part 25, ARP 4754A, DO-160, DO-178 and DO-254 is preferred.
    • A strong familiarity with Honeywell Primus EPIC avionics system is a plus but certainly not required.

    The Structures Company is an AA/EOE.
     
    Job Number: 332
    Job Location: Reno, NV
    Rate: ***DOE***
    Per Diem: Yes
    Overtime: Possible
    Duration: 6 Month Contract to Hire
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Sr. Electrical Engineer

    Description:
    Sr. Electrical Engineer 

    Location: Cedar Rapids, IA

    12+ month contract, could be contract-to-hire


    This is an exciting and challenging opportunity to design and support complex ruggedized hardware for fixed-wing and rotary-wing environments. Recently, this team completed development of a video graphics system, a video processing computer that provides 3-D video processing of aerial refueling operations, a tactical situational awareness system, and a ruggedized computing platform that provides pilots with real time situational awareness for the Next Generation Tanker. Additional products developed by this team include integrated processing cabinets, control display units, control panels, next generation processors and data transfer units that are used on multiple military platforms. There are also opportunities to develop digital logic for complex FPGA and SoC applications, perform testing in on site EEE facilities, and support transition of products into production. The selected candidate will work closely with Systems, Software, Mechanical Engineers, Environmental Effects Engineering, Manufacturing/Operations and Design to Cost support staff to assure defined requirements are consistently met in all phases of a product’s lifecycle.

    Support activities include:
    - Production support of complex avionics hardware including aircraft displays and mission computers.
    - Development of test support equipment for integration and formal qualification (EMI/ENV) of complex avionics hardware including aircraft displays and mission computers.
    - Obsolescence management of complex circuit card designs include multiple memory technologies, data interfaces, and mixed analog/digital designs.
    - Development and test of high speed digital circuit board designs (processors, I/O, backplane, graphics) requiring the application of electrical engineering principles and techniques.
    - Excellent teamwork and communication skills required. Also requires knowledge of hardware design processes, signal integrity analysis, manufacturability, testability, and thermal control.

    REQUIRED:
    -The ability to obtain a US Department of Defense (DoD) security clearance 

    PREFERRED:
    -Direct industry experience and knowledge of MIL-STDs (461, 810, etc) and DO-160,

    ____________________________________________________________________

    Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
     
    Job Number: 58025
    Job Location: Cedar Rapids, IA
    Rate: $55+
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: BUTLER AEROSPACE & DEFENSE
    Attention: Laura Leszek
    Address: SHELTON POINTE STE 204
    2 TRAP FALLS ROAD

    City, State: SHELTON, CT 06484
    Phone: 203/926-2705
    Fax Phone: 203/926-0082
    Website: www.butler.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Sr. Electrical Subsystem Engineer

    Description:
    • Develop electrical systems design and architecture
    • Perform electrical systems installation and integration activities across the program IPTs
    • Provide subject matter expert level technical guidance and leadership for electrical systems
    • Perform electrical loads analysis and documentation
    • Define requirements for the electrical systems to ensure compliance with regulations and customer requirements
    • Provide validation and verification of electrical systems requirements
    • Provide electrical systems support for ground and flight tests for both development and certification
    • Interface directly with electrical systems suppliers to ensure requirements are met
    • Support the various sub-systems and structures IPTs with their development and certification



    We're looking for someone who has:
    • Bachelor’s Degree in a relevant engineering area, with a Master’s degree in a technical and/or management specialty preferred
    • 10+ years of deep, hands-on experience in electrical systems development, design and testing in Military, Commercial and/or business jet aircraft
    • 3+ years of demonstrated experience leading technical resources and teams, both internally and externally, as well as both on-site and off-site
    • In-depth and current knowledge of Part 25 regulatory requirements
    • Experience and expertise in the development of commercial and/or high-end business jets strongly desired
    • Recent relevant experience in developing electrical systems from concept through certification strongly desired
    • Must be able to demonstrate a clear understanding, knowledge and ability to define requirements, generate architecture and achieve compliance
    • Proven problem-solving skills across multi-disciplinary skill sets
    • Experience with CATIA V5 and Teamcenter PLM desired



    The Structures Company is an AA/EOE.
     
    Job Number: 331
    Job Location: Reno, NV
    Rate: ***DOE***
    Per Diem: Yes
    Overtime: Possible
    Duration: 6 Month Contract to Hire
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Sr. Principal Mechanical Engineer - Clearance GA

    Description:
    Sr. Principal Mechanical Engineer (Job Number: 19032956)

    Number of Openings: 1

    Location(s): United States-Georgia-Warner Robins


    Shift: 1st Shift

    Target Start Date: Nov 25, 2019

    Target End Date: Jun 19, 2020

    Pay Rate: $57 to $60/hr

    Work Schedule: 9/80

    Duration of Assignment: Approx 3 to 6 months


    This position is located at Warner Robins Air Force Base, Georgia.
    This position supports the existing Government program and engineering teams at RAFB as well as Melbourne, FL. Duties to include the review, assessment and update of aircraft maintenance and structural requirements and technical data for sustainment. Development of bill of materials and repair concepts required to accomplish heavy maintenance is required. Experience in the resolution of aging aircraft issues is preferred. Technical support and advisory of Government counterparts is a primary objective of this position. The demonstrated ability to work closely with Government counterparts is required.

    Basic Qualifications:

    Bachelor's degree in a Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university with a minimum of 9 years of experience in design, fabrication or repair of metallic airframe structures.
    An active DoD Interim Secret Clearance required to start.


    Preferred Qualifications:

    BS or MS, Mechanical or Aerospace Engineering
    Experience with programmed depot maintenance (PDM) for aging military aircraft
    Liaison Engineering Experience.
    Excellent verbal and written communication skill
    Ability to collaborate in a team environment
    Ability to prioritize multiple responsibilities and/or accomplishing them simultaneously
    Ability to comprehend and analyze complex problems and develop solutions
    Experience with military specs and standards.
    Experience interfacing with a military customer
     
    Job Number: JK-1815S
    Job Location: Warner Robins AFB, GA
    Rate: 60/hr max
    Per Diem: pd split possible
    Duration: 8 months
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Sr. Propulsion Engineer

    Description:
    As the Senior Propulsion Engineer you'll report to the Director of Propulsion IPT and be responsible for the development, integration, analysis, testing, and certification of the propulsion system on the aircraft.

    • Develop propulsion systems using industry standards and best practices based on trade studies, research and analysis.
    • Participate in supplier selection and coordination, integration, flight test and certification of propulsion systems.
    • Accomplish deliverables associated with the propulsion system for key program milestones, including design reviews, hardware deliveries, testing and certification milestones.
    • Coordinate with other engineering, manufacturing, or specialty personnel to resolve problems.


    Requirements:
    • Minimum of a Bachelor’s Degree in a relevant engineering discipline, or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    • 10+ years of hands-on experience in propulsion systems development for Military, Commercial, and/or Business Jet platforms.
    • Experience with propulsion system modeling, including thrust and drag bookkeeping.
    • Experience with engine/nacelle/airframe integration.
    • Proven success managing and resolving technical issues with engine, nacelle, and EBU suppliers.
    • Demonstrated skills generating qualification plans and reports.


    The Structures Company is an AA/EOE.
     
    Job Number: 345
    Job Location: Reno, NV
    Rate: OPEN - **DOE**
    Per Diem: Yes
    Duration: 12+ Months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Sr. Technical Writer

    Description:
    Technical writing experience in completions publications such as, outfitting wiring diagram manuals, outfitting maintenance manuals and cabin operating manuals.

    Education and Experience Requirements:
    Bachelor's Degree or equivalent experience in the authoring of technical publications required. Four (4) years of technical publications experience, to include using industry standards to develop/revise technical documents in word processing applications. Knowledge of basic aircraft system methodology or equivalent technology is required. Proficiency in computer technology/software and typing skills is required. An A&P license and 4 years of related aircraft experience in addition to the four (4) years technical publications experience may offset the degree.


    Position Purpose:
    Directly responsible (either individually or with other team members) for the development of technical publications. This can include special projects, research and development, and aircraft safety-related content. Support the complete workflow process to ensure successful development and revision of technical publications. Comply with established quality processes to ensure accuracy, ease of use, and timely delivery of content.

    Principle Duties and Responsibilities:

    Essential Functions: 1. With minimal to no supervision, use aircraft technical data to develop technical content that provides the information necessary for efficient return to service of the aircraft. 2. Conduct reviews, analysis, and modification of technical documents to gain a thorough understanding of complex aircraft system operation. 3. Provide training support on complex system operation and technical publications software and processes. 4. Participate with publications team to ensure department workflows and business processes are followed. 5. Proactively conduct discussions with internal/external customers in the development of source data, making sure it meets technical publication requirements. 6. Directly collaborate with Research and Development, Production, Completions Center, and Customer Support personnel to develop, review, and approve technical procedures. 7. Provide process improvement recommendations to leadership that can reduce overall department cost and/or increase productivity. 8. Contribute to development and continuous improvement of department styles, standards, operating procedures, and priorities. 9. Provide input to leadership on new processes or technology to enhance the Technical Publications business model. 10. Assist in the development of solutions to resolve technical data challenges. 11. Collaborate with leadership, team members, and other departments to develop/implement special projects. Perform other duties as assigned.

    Other Requirements: 1. Extensive knowledge of aircraft system methodology gained through practical experience is required. 2. Strong technical writing and communication skills are required. 3. Ability to read and interpret engineering data is required. Experience with 3-D data is desired. 4. Thorough knowledge of aircraft/hand tools, test equipment, parts nomenclature, maintenance procedures, and aircraft equipment (obtained through experience, research, or training) is required.
     
    Job Location: Savannah, GA
    Rate: $34
    Per Diem: Possible
    Overtime: Possible
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Tara Gilbert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Sr. Tool Design Engineer

    Description:
    • Perform all engineering activities related to the design and construction of new tools and modification of existing tools for aerospace composites manufacturing.
    • Responsible for working with personnel throughout the company to help resolve any engineering related tooling issues that may impact the manufacturing delivery schedule.
    • Document findings, communicate results, make technical presentations, and may represent the organization as the prime technical contact on tooling related projects.
    • Investigate manufacturing problems and recommend corrective action.
    • Develop and maintains Tool Design and Drawing Standards.
    • Study specifications and confer with engineering and shop personnel to resolve design problems related to material characteristics, dimensional tolerances, service requirements, manufacturing procedures, and cost of tools.
    • Prepare models, drawings, engineering changes, and specifications.
    • Facilitate project updates to management, and engage frequently with engineers.
    • Interface daily with many departments at various technical and management levels.
    • Develop, evaluate, and improve tool manufacturing methods, utilizing knowledge of product design, materials, thermal coefficients, fabrication processes, production equipment capabilities, assembly methods, and quality control standards.
    • Estimate tool production times, staffing requirements, and related costs to provide information for management decisions.
    • Confer with management, engineering, and other staff regarding manufacturing capabilities, production schedules, and other considerations to facilitate tool production or procurement.


    Requirements:
    • Bachelor’s degree from an accredited institution, with a concentration in a relevant Engineering discipline plus 5 years on the job experience.
    • 10+ years of role related experience may be substituted for formal education.
    • Experience in aircraft composite fabrication and assembly processes.
    • Knowledge of lean manufacturing philosophies and tools.
    • Excellent verbal and written communication skills.
    • Excellent interpersonal and coaching skills.
    • Ability to interact with all levels of the organization.
    • Excellent Organizational Skills and problem-solving skills.
    • Strong team player
    • Excellent computer skills, word, excel and PowerPoint.
    • CAD experience (Catia V5 preferred, but any CAD experience acceptable)
    • Ability to read, interpret and create engineering drawings.
    • Knowledge and experience with AS9100 a plus.
    • Experience with manufacturing based ERP systems a plus.
    • Knowledge of GD&T a plus
    • Applicants must be U.S. persons as defined by the ITAR (22 CFR §120.15)

    The Structures Company is an AA/EOE.
     
    Job Number: 276
    Job Location: Mojave, CA
    Rate: $58-$65/Hr.
    Per Diem: Yes
    Duration: 10+ Months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Staff Engineer Software (5 openings) - Clearance FL

    Description:
    166746 Job Title: Staff Engineer Software (5 openings)

    Work Site Address: 2000 W Nasa Blvd, Melbourne, FL 32901
    Job Number: 1822
    Max Pay Rate: 85.00
    Start Date: 12/16/2019
    End Date: 11/12/2021
    Position Type: Contract


    Job Summary:
    Position is a contract to hire Software Engineer that will develop, modify and maintain customized or standardized applications using software engineering best practices and standards, and participate in the full life-cycle of software development, to include requirements development, modeling and design, application development, unit to CSCI testing, integration, formal system testing, release, installation, and maintenance. Excellent verbal, written and interpersonal skills are required.

    The E-2D program is seeking a software engineer to support multiple E-2D programs. Their responsibilities would include:
    • Full Lifecycle design, implementation, and unit testing of software
    • Work with various sub teams to integrate functionality with other IPTs
    • Actively participate in code reviews
    • Develop SW products from all phases of SW life cycle.

    Basic Qualifications:

    •Bachelor’s Degree in a Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university plus 14 years of software engineering experience OR Master’s Degree in Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university and 12 years of software engineering experience.
    •Experience developing software / writing code in C/C++ or Ada
    •Experience with Linux


    •Master’s degree in Computer Engineering, Computer Science, or Electrical Engineering
    •Strong Problem Solving Skills
    •Experience in Software Test
    •Familiarity with Atlassian tool suite and tools like git and Confluence
    •Familiarity with Agile software development process
    •DOORS experience
    •Eclipse or other integrated development environment (IDE)
    •Knowledge of Linux systems with basic commands
    •Familiar with aircraft systems/subsystems architectures (i.e., CNI, vehicle, cockpit, …)
    •Experience with OpenGL


    Length of contract is up to 12 months with option to hire.
     
    Job Number: JK-1822S
    Job Location: Melbourne, FL
    Rate: 85/hr max
    Per Diem: pd split possible
    Duration: 12 months
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Stress Analysis Engineer

    Description:
    Qualifications:
    • Must have experience with aircraft primary structures
    • Deep understanding of Theoretical Statics and Strength of Materials.
    • Experience in aircraft or spacecraft composite fabrication, design, and analysis processes
    • Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures
    • Minimum 5 years or more of applicable experience in the analysis of structural systems using strength of materials and finite element based methods
    • Experience with free-body diagrams and classical stress analysis techniques
    • Hands-on experience with composites part fabrication and assembly processes and proficiency in FEMAP.
    • Pilot, aircraft homebuilding and rapid prototyping experience a strong plus
    • Excellent verbal and written communication skills
    • Excellent organizational and problem-solving skills
    • Excellent computer skills, including Outlook, Word, Excel and PowerPoint
    • Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
    • Experience with manufacturing-based ERP systems, such as Oracle, is a plus
    • Applicants mut be “U.S. persons” as defined by the ITAR (22 CFR §120.15)

    Educational Requirements
    • Bachelor’s degree from an accredited institution, with a concentration in a relevant Engineering discipline


    The Structures Company is an AA/EOE.
     
    Job Number: 71
    Job Location: Mojave, CA
    Rate: $75-$85/Hr. ***DOE***
    Per Diem: Yes
    Overtime: Yes
    Duration: 10+ Months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Stress Engineer

    Description:
    Structural analysis in support of aerospace structures. LM Aero seeks the opportunity to review the qualifications of individuals that are experienced in any one or more areas that match our opportunities – which may currently include: Developing static external aircraft loads and repeated external loads spectrum for aircraft and components, Flutter, Aircraft Dynamic Analysis, Vibration, Vibro-acoustics, Performing static strength (stress) analyses, Performing durability and damage tolerance (DADT) analyses, Building finite element models and/or post-processing results for structural analysis. These activities may be in support of new designs, modifications, retrofits, or support of fielded aircraft. Aerospace experience is required. Familiarization and use of specialized tools for structural analysis is required. Familiarity and experience with FEA tools such as NASTRAN and PATRAN (or other pre/post processor software), is desired. Candidate must have working knowledge/experience with Computer Aided Design software and be capable of interpreting detail, assembly, and installation type drawings.
    Must be a US Citizen. This position is located at a facility that requires special access.
     
    Job Location: Fort Worth, TX
    Rate: 65-70/hr
    Per Diem: Split
    Input Date: 11/14/2020
    Firm Name: GLOBAL CONTRACT PROFESSIONALS
    Attention: Sanjay Khatri
    Address: P O BOX 161127
    City, State: FORT WORTH, TX 76161-1127
    Phone: 817/847-6673
    800 Phone: 800/942-2376
    Fax Phone: 817/847-9444
    Website: www.teamglobal.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Stress Engineers / Stress Analysts Needed

    Description:
    Airframe stress analysis and sizing of major aircraft structural components for CFR 14, Part 25 and EASA CS-25 certification.
    Support internal loads development and coordination of airframe stiffness updates between major structural components/suppliers.
    Support development of analysis methods and tools for design/manufacture/testing/certification.
    Support Tier 1 Supplier/Partner analysis and oversight of methods.
    Support design reviews and model releases for all structural interfaces within an IPT environment.

    Requirements:
    Must be a US or Canadian citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772.
    8+ years of experience in performing stress analysis, developing methods or performing validation testing for Part 25 aircraft components.
    Must have a bachelor’s degree in Aerospace or Mechanical Engineering, or similarly related area.
    Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure / confidentiality agreement with current or any former employer that would prevent you from fully performing the duties of the position.
    Knowledge of the conceptual and preliminary design phases of aircraft development is strongly preferred.
    Knowledge of structural static, durability and damage tolerance requirements for Part 25 certification strongly preferred.
    Highly self-motivated with a strong bias for action, and excellent problem-solving skills across multi-disciplinary skill sets.

    The Structures Company, LLC is an AA/EOE.
     
    Job Location: Reno, NV
    Rate: Open
    Per Diem: Yes
    Overtime: Possible
    Duration: Long-term
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Chris Sheets
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Structural Analysis - Static & Loads - Many Needed

    Description:
    Structural analysis in support of aerospace structures. The opportunity to review the qualifications of individuals that are experienced in any one or more areas that match our opportunities – which may currently include: Developing static external aircraft loads and repeated external loads spectrum for aircraft and components, Flutter, Aircraft Dynamic Analysis, Vibration, Vibro-acoustics, Performing static strength (stress) analyses.

    Email resume to: mmccarthy@pdstech.com
     
    Job Number: Lock, Stress - TX
    Job Location: Ft. Worth, TX
    Rate: $69.00/hour
    Per Diem: Possible
    Overtime: Possible
    Duration: 3 Months+
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Mary Ann McCarthy
    Address: 1215 FERN RIDGE PKWY STE 231
    City, State: ST LOUIS, MO 63141
    Phone: 314/628-9143
    800 Phone: 800/472-3737
    Fax Phone: 314/628-9485
    Website: www.pdstech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Structural Analysis - Stress/DADT/Dynamics/FEA/FEM

    Description:
    ****MUST be a U.S. Citizen****
    ****MUST have a Bachelor's Degree****
    ****Active Secret Clearance highly preferred. Position may require a clearance****

    Job Description:
    1. Structural analysis in support of aerospace structures.
    2. Our client seeks the opportunity to review the qualifications of individuals that are experienced in any one or more areas that match our opportunities – which may currently include: Developing static external aircraft loads and repeated external loads spectrum for aircraft and components, Flutter, Aircraft Dynamic Analysis, Vibration, Vibro-acoustics, Performing static strength (stress) analyses, Performing durability and damage tolerance (DADT) analyses, Building finite element models and/or post-processing results for structural analysis.
    3. These activities may be in support of new designs, modifications, retrofits, or support of fielded aircraft.
    4. Aerospace experience is required.
    5. Familiarization and use of specialized tools for structural analysis is required.
    6. Familiarity and experience with FEA tools such as NASTRAN and PATRAN (or other pre/post processor software), is desired.
    7. Candidate must have working knowledge/experience with Computer Aided Design software and be capable of interpreting detail, assembly, and installation type drawings.


    Education:
    1. Level 2: BS+4-8 YRS or MS+2-6 YRS
     
    Job Number: 11851
    Job Location: Fort Worth, TX
    Rate: $61.00 - $69.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 12 mos
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Structural Analysis - Stress/DADT/Dynamics/FEA/FEM

    Description:
    ****MUST be a U.S. Citizen****
    ****MUST have a Bachelor's Degree****

    Job Description:
    1. Structural analysis in support of aerospace structures.
    2. Our client seeks the opportunity to review the qualifications of individuals that are experienced in any one or more areas that match our opportunities – which may currently include: Developing static external aircraft loads and repeated external loads spectrum for aircraft and components, Flutter, Aircraft Dynamic Analysis, Vibration, Vibro-acoustics, Performing static strength (stress) analyses, Performing durability and damage tolerance (DADT) analyses, Building finite element models and/or post-processing results for structural analysis.
    3. These activities may be in support of new designs, modifications, retrofits, or support of fielded aircraft.
    4. Aerospace experience is required.
    5. Familiarization and use of specialized tools for structural analysis is required.
    6. Familiarity and experience with FEA tools such as NASTRAN and PATRAN (or other pre/post processor software), is desired.
    7. Candidate must have working knowledge/experience with Computer Aided Design software and be capable of interpreting detail, assembly, and installation type drawings.

    Education:
    1. Level 2: BS+4-8 YRS or MS+2-6 YRS
     
    Job Number: 11836
    Job Location: Marietta, GA
    Rate: $58.00 - $66.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 15 mos
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Structural Analysis - Stress/DADT/Dynamics/FEA/FEM

    Description:
    ****MUST have an Active Secret Clearance or to have had one within the last two (2) years with the most recent investigation within the last five (5) years****

    Job Description:
    1. This position is for a Stress Analysis Engineer with our client.
    2. This position requires an Airframe Stress Analyst to use their technical expertise to analyze aircraft structure and subsystems installations.
    3. The candidate will apply his or her understanding of the technical principles of structural analysis toward the solution of technical problems.
    4. The candidate will have thorough knowledge in the field of aircraft structural analysis and will have a broad knowledge of all related disciplines.
    5. The candidate will be responsible for preliminary and detailed analysis of aircraft structures, structural assemblies, participation in trade studies and coordination with Integrated Product Teams.
    6. Must be a US Citizen.
    7. This position is located at a facility that requires special access.

    Education:
    1. Level 2: BS+4-8 YRS or MS+2-6 YRS
     
    Job Number: 11831
    Job Location: Palmdale, CA
    Rate: $85.00 - $91.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 15 mos
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Structural Analysis - Stress/DADT/Dynamics/FEA/FEM (Airframe Stress Analyst)

    Description:
    ****MUST have an Active Secret Clearance or to have had one within the last two (2) years with the most recent investigation within the last five (5) years****

    Job Description:
    1. This position is for a Stress Analyst with our client.
    2. This position requires an Airframe Stress Analyst to use their technical expertise to analyze aircraft structure and subsystems installations.
    3. The candidate will apply his or her understanding of the technical principles of structural analysis toward the solution of technical problems.
    4. The candidate will have thorough knowledge in the field of aircraft structural analysis and will have a broad knowledge of all related disciplines.
    5. The candidate will be responsible for preliminary and detailed analysis of aircraft structures, structural assemblies, participation in trade studies and coordination with Integrated Product Teams.
    6. Must be a US Citizen.
    7. This position is located at a facility that requires special access.

    Required Skills:
    1. Program Management
    2. Project Scheduling
    3. Structures
    4. Ability to Coach or Mentor Co-Workers
    5. Ability to Work with Others
    6. Writing proposals and reports
    7. Finite Element Analysis (FEA)
    8. Nastran/Patran
    9. Ability to write technical documents and end-user documentation
    10. Project Planning
    11. Stress Analysis

    Desired Skills:
    1. Analysis
    2. Composites and Materials
    3. Leadership Skills
    4. Abaqus
    5. Ansys
    6. Cost Estimation
    7. Engineering
    8. Hypermesh
    9. Knowledge of materials, substances and their characteristics
    10. Metallics Background

    Education:
    1. Level 4: BS+14 YRS or MS+12 YRS
    2. 14 years or more of professional experience; or 12 years of professional experience with a related Masters degree.
    3. Experience conducting high temperature analysis on airframe primary structure.
    4. Familiarity with high temperature material and joint applications (high thermal gradients, CTE material mismatch and thermal stresses @ 1,200F+)
     
    Job Number: 11746
    Job Location: Palmdale, CA
    Rate: $110.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 8 mos
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com