Job Search Results

747 listings were found that matched your search words: Keywords: Aircraft ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2020/01/24 Friday 05:41PM Pacific Time by ContractJobHunter. )

Listings 1 - 747

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2 Aircraft Stress Engineers - Composites

Description:
Aircraft composite stress engineering contractors needed.
MUST BE US PERSONS.
Ability to work in a fast paced environment.
MUST have a good Composites Primary Airframe Structures background.
FAR 23 experience is a huge plus.
Classical hand analysis, Nastran, FEMAP a plus
US PERSONS REQUIRED

Position Responsibilities
This is a Senior Level Contract Stress Analyst position.
General Minimum Requirements:
• Education: MS with 8+ years, or BS with 1O+ years of relevant experience
• Create engineering criteria and analysis methods to ensure that the work meets all program requirements (e.g., airworthiness, customer requirements, internal methods and processes, etc.).
• Actively develop and evaluate plans for activities and soundness of proposed methods and analysis to meet the program schedules and airworthiness standards.
• Select appropriate material systems for structures applications and identify all material testing requirements.
• Identify and communicate technical risks to the relevant stake holders through program status reports in a timely manner.
• Review all program critical documents such as stress reports, manufacturing plans and procedures, and structural test plans in a timely manner to ensure compliance with design and loads requirements.
• Resolve complex engineering issues in creative and effective ways as to balance technical product, cost, and schedule.

Must be a US Citizen, or Greencard holder.

THE STRUCTURES COMPANY IS AN AA/EOE
 
Job Location: Manassas, VA
Rate: $75-85/hr DOE
Per Diem: Yes
Overtime: Possible
Duration: Long-term
Start Date: ASAP
Input Date: 04/02/2019
Last Updated: 01/23/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

4 Aircraft Stress Engineers with Composites

Description:
4 Aircraft Composite Stress Engineers Needed.
Require 10+ years of aircraft/aerospace stress analysis with a good composites background.
Previous FEMAP experience is a plus.
Composite airframe analysis experience a MUST.
MUST be US Persons

Qualifications:
-Experience in aircraft or spacecraft composite, design and analysis processes
-Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures
-Minimum 10 years or more of applicable experience in the analysis of structural systems using strength of materials and finite element based methods
-Experience with free-body diagrams and classical stress analysis techniques
-Experience with FEMAP
-Rapid prototyping experience a strong plus
-Excellent computer skills, including Outlook, Word, Excel and PowerPoint
-Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
-Applicants must be U.S. persons as defined by ITAR
Educational Requirements-
Bachelors degree from an accredited institution, with a concentration in a relevant Engineering discipline

The Structures Company is an AA/EOE.
 
Job Location: Mojave, CA
Rate: $80-85/hr DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 01/23/2020
Last Updated: 01/24/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: chrissheets@thestructurescompany.com
Website: www.thestructurescompany.com

2 Stress Engineer Openings - Composites - Contract-to-Hire

Description:
We have a need for 2 Aircraft Composite Stress Engineers that are open to a contract-to-hire scenario. MUST be US Citizens.
Require 10+ years of aircraft/aerospace stress analysis with a good composites background.
Previous FEMAP experience is a plus.
Composite airframe analysis experience a MUST.
MUST be US Citizens

Qualifications:
-Experience in aircraft or spacecraft composite, design and analysis processes
-Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures
-Minimum 10 years or more of applicable experience in the analysis of structural systems using strength of materials and finite element based methods
-Experience with free-body diagrams and classical stress analysis techniques
-Experience with FEMAP
-Rapid prototyping experience a strong plus
-Excellent computer skills, including Outlook, Word, Excel and PowerPoint
-Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
-Applicants must be U.S. Citizens
Educational Requirements-
Bachelors degree from an accredited institution, with a concentration in a relevant Engineering discipline

The Structures Company is an AA/EOE.
 
Job Location: Mojave, CA
Rate: Open
Per Diem: Yes
Overtime: Yes
Duration: Contract-to-hire
Start Date: ASAP
Input Date: 07/18/2019
Last Updated: 01/24/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: chrissheets@thestructurescompany.com
Website: www.thestructurescompany.com

2560 - AVIONICS SYSTEMS ENGINEER - cv, word doc only

Description:
Interfacing with customers (both internal and external) during definition and implementation of avionic system integration.

Execute program milestones according to established schedule and ensure critical path and key dependencies are effectively managed to achieve successful outcome.

Reviewing detailed execution plans and schedules with the project management team to ensure adequacy, completeness, and harmonization with the overall program level plan.

Generating system requirements documents for physical and logical interfaces.

Defining cockpit display formats and control operation in conjunction with the customer.

Developing and running functional test procedures for all avionics sub-systems.

Advising the customer on the physical installation of avionics equipment.

Troubleshooting and diagnosing avionics problems on the systems integration rig and flight test aircraft (may involve travel)

Documenting, tracking, and resolving avionics problems resulting from both design errors and equipment failures.

Generating certification documents for subsystems demonstrating compliance with OEM certification plans.

Supporting Change Management related activities at the program level.

Bachelor's Degree in applicable engineering or science field, and ten years of related experience, or, in the absence of a bachelor's degree, sixteen years of related experience.

Detailed systems knowledge is required in at least five of the following systems: AFCS, Air Data, Cockpit Audio, Cockpit Printers, Datalink, EFIS, EICAS, Enhanced Vision Systems, FANS, FMS, GPS, Graphical Datalink Weather, HUD, Integrated Modular Avionics (IMA), On-board Maintenance Systems, Radio Altimeters, Synthetic Vision Systems, TAWS, TCAS/Transponders, VHF Comm, VHF Nav, XM Weather.

Analysis - thinking through a logical, in-depth analysis of a problem or situation.

Cooperation - Serves as a role model to his or her coworkers by demonstrating respect and sensitivity for fellow workers and promoting open discussion of issues.

Coordinating - Provides a seamless stream of communication and support.

Customer Service Orientation - Fully comprehends the value of the organization's customers and champions strategies to ensure world-class service.

Dependability - Consistently produces exemplary results that can be used as prototypes for future projects.

Judgment - Able to quickly assess the costs, benefits, and risks of a decision while using sound logic to ultimately make well-informed decisions.
 
Job Number: 2560
Job Location: Toronto, Canada
Rate: 85.00
Per Diem: No
Overtime: 1.5
Duration: Long Term
Start Date: ASAP
Input Date: 10/18/2019
Last Updated: 01/22/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2571 - EMC ENGINEER - cv, word doc only

Description:
Execute complex engineering assignments requiring expertise within EMC field.

Analyze modifications at Aircraft level and check compliance with certification regulations.

Estimate the level of impact of complex projects.

Propose plans for production ramp-up.

Participate in complex investigations related to cost reduction.

Participate in meetings and design reviews with system or structural suppliers for design optimization and cost reduction.

Participate in Continued Airworthiness projects and propose risk mitigating solutions.

University degree in Aerospace Engineering or equivalent. Specialization in Electromagnetic Compatibility and Susceptibility is required.

Have a minimum of 8 years working experience in the specialty within the Aerospace domain.

Are familiar with the relevant industry standards and best practices such as DO-160, SAE ARP, FAA regulations, as well as other applicable airworthiness regulations.

have good knowledge about FAR 25.981 regulations and fuel tank protection against lightning and static electricity
Familiarity with electromagnetic simulation / analysis tools (such as EMA3D) is a strong asset.

Have strong analytical skills.

Have team spirit, and have the ability of working in a multicultural environment.

Are self-motivated and are proactive in finding solutions to problems.

Have strong communication skills (written and spoken) in French and English.

Are able to travel.
 
Job Number: 2571
Job Location: Mirabel, Canada
Rate: 58.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 10/18/2019
Last Updated: 12/06/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2580 - AVIONICS SYSTEMS INTEGRATOR - cv, word doc only

Description:
Responsible, as an Avionics Systems Integrator, to perform various tasks related to the development, qualification, certification and in-service support of Avionics systems on Challenger aircrafts.

Responsible for supporting investigation for in service and manufacturing issues and performing root cause analysis of Avionics systems.

Participate in the Avionics Systems architecture design to meet Aircraft Design Requirements and Objectives.

Support the Bombardier Flight Test Center in development and certification tests; witnessing of tests may be required.

Support the Final Assembly Line and In Service Aircraft for any development issues.

Manage, review and approve the deliverables of the Avionics System Suppliers.

Work with other functions & disciplines of the Challenger program to provide required information and also to collect required data to allow the Avionics design, development & certification effort to progress.

Support other departments such as Production, Customer Support, Program Office and Product Planning.

Participate in meetings and design reviews with Avionics System Suppliers and certification authorities.

Be able to travel is a must.

University degree in Electrical, Electronics, Software, or Aerospace Engineering. with at least five (5) years of relevant experience with the design, development, integration and certification of Avionics systems.

Good knowledge with the specification, design, integration, test and certification of Avionics systems on aircraft.

Must have a good knowledge of RTCA documents DO-178 and DO-160.

Must be familiar with part FAR25/525 certification process and with the ARP4754 standard.

Have an experience with civil aircraft and airworthiness authorities.

Are proficient with the use of Microsoft Office software tools to produce presentation and reports.

Have the ability to work well in a team environment.

Have strong communication skills (written and spoken).
 
Job Number: 2580
Job Location: Montreal, Canada
Rate: 58.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 10/18/2019
Last Updated: 12/06/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

2581 - RELIABILITY, MAINTAINABILITY & SAFETY ENGINEER - cv, word doc only

Description:
Prepare reliability & safety studies, Failure Modes and Effects Analysis (FMEA), Aircraft Functional Hazard Analysis, Fault Tree Analysis and System Safety Analysis to certify modifications to the Challenger aircraft systems.

Participate in internal and external Design Reviews with Partners/Suppliers. You will be responsible for reviewing Partner%u2019s/Supplier%u2019s reports and ensure reliability & safety requirements are met.

Interface with various (Design Authorized Delegate) DAD disciplines Systems Engineering, Flight Sciences as part of the Integrated Design Team.

Interface with other internal and external customers (e.g. Airworthiness, Product Support, Marketing, Partners, and Certification Authorities).

Be involved with the maintenance engineering group to evaluate potential changes to certified maintenance tasks in conjunction with the DAD.

Evaluate potential modification/creation of Master Minimum Equipment List (MMEL) items with Transport Canada Civil Aviation (TCCA) and Federal Aviation Administration (FAA).

Prepare and present risk assessments for continued airworthiness queries.

Have at least 15 years of experience in the field of aircraft reliability/safety and in particular the following:

Creating and reviewing System safety assessments that meet the requirements of ARP4761.

Experience in evaluating in-service issues which are subject to safety.

Review and propose different certified maintenance task intervals for previously certified systems.

Experience with Continued Airworthiness Risk Assessments (CAA).

Experience in creating and proposing changes to the MMEL for TCCA and FAA.

Have experience in applied aerospace reliability engineering for mechanical and electrical components including reliability prediction.

Have completed various types of aircraft level assessments such as Particular risk analysis (rotor burst, tire burst) and zonal analysis.

Experience with ARP4754 is considered an asset.

Must be familiar with common reliability and safety processes and tools to perform the above mentioned tasks (e.g. Reliasoft, CAFTA.).

Experience with civil aircraft and civil airworthiness regulations is mandatory (TCCA, FAA, EASA).

Excellent comprehension and applied skills with FAR/JAR 25.1309 and all associated guidance material.

Good writing skills and communication skills in English is essential for the position.

Must possess the ability to work with minimum supervision and be a team player.

Must also be a person with initiative, a strong sense of responsibility and good engineering judgment.
 
Job Number: 2581
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 10/18/2019
Last Updated: 01/22/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2582 - HYDRO-MECHANICAL SYSTEMS ENGINEER - cv, word doc only

Description:
Take part in the integration of the flight control, hydraulic and/or landing gear system for the definition, specification, design, analysis, modification, test and certification of hydro-mechanical systems.

Coordinate product development activities between the supplier of the system and the affected work packages.

Ensure successful design, validation, certification and delivery of the system.

Ensure successful completion of each development phase deliverables (may author, review, approve).

Problem solve the technical issues in a cross functional environment.

Be involved in the design and integration of the system.

Review the design and documentation of all the aspects related to your system.

Check for quality of the Supplier's analyses.

Validate and verify system requirements as well as system performance through design reviews, analyses, rig and aircraft testing.

Define, prepare and execute qualification and certification tests.

Work with supplier in the investigation and resolution of test findings.

Bachelor or Master's (preferred) degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of five (5) to seven (7) years.

Have a background in design, integration, development and certification of Hydro-Mechanical Systems.

Cognizant of the relevant Airworthiness Regulations and certification process.

Good oral and technical writing skills in English (required).

Are motivated, self-starter, organized, autonomous and able to work under limited supervision.

Ateam player and able to work with suppliers and customers.

Are a dynamic person with initiative, a strong sense of responsibility and good judgment.

Have knowledge of MS Office software (essential).

Have knowledge of CATIA, Matlab, Simulink (an asset).
 
Job Number: 2582
Job Location: Toronto, Canada
Rate: 55.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 10/18/2019
Last Updated: 12/31/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2584 - ELECTRICAL WIRING INTERCONNECT SYSTEM (EWIS) ENGINEER - cv, word doc only

Description:
Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS.

Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical.

Support Production; respond to RNC.

Provide technical assistance to engineering staff and contribute to completion of project milestones.

Apply knowledge to provide solutions to a variety of technical problems of moderate scope and complexity, using a combination of judgment with defined practices and procedures.

Requirements

Bachelor Degree in Aircraft Avionics or Electrical Engineering or Bachelor Degree in Engineering with equivalent work experience in Wiring Integration or Design.

Have a minimum of 15 years of relevant aerospace experience.

Must have wiring design, wiring installation and/or wiring troubleshooting experience and you are familiar with ECAD tools & processes.

Are capable of interfacing with wiring diagrams, system, and EMI/EMC requirements.

Have an intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installations and maintainability requirements.

Have an excellent verbal and written communication skills, and computer skills (PC/MS Office) are required.

Must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative.

Have knowledge of Catia V5.

Have an Avionic and or EWIS MRB approval knowledge and understanding, an asset.

English - French working knowledge an asset.
 
Job Number: 2584
Job Location: Canada
Rate: 61.00 US
Per Diem: Paid - 3mt
Overtime: Paid - NOT at 1.5X
Duration: 12 mos
Start Date: ASAP
Input Date: 10/31/2019
Last Updated: 12/20/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2585 - DESIGN ENGINEER - CV in 'word doc - only'

Description:
Provide expertise for the design and manufacturing of aerospace components (Metallic & Composite aircraft structure, systems installation and hardware/materials).

Participate in the identification of design ideas.

Analyze current engineering design and proposed new Design solution to facilitate the assembly of the components.

Support Design plan, coordinate its implementation and draw conclusions.

Support recommendation to senior management on strategies to Design assembly improvement.

Support prioritization of ideas implementation, based on ROI (Return on Investment) but also other criteria's and program requirements.

Support processes and strategies around the batching/combination of ideas to ease the implementation of design improvements.

Review supplier drawings, dimensional tolerances, Datum definition, manufacturing processes, process capabilities, tooling philosophy and provides recommendations as needed.

Support integration team in the preparation of the Product Change Request (PCR).

Requirements:

Have a University degree in Aerospace or Mechanical engineering or in a related field of Design.

Have a minimum of 15 years of experience in aircraft structure and manufacturing organization.

Have a good understanding of design, manufacturing and quality processes used in aerospace for metallic and composite structures, system installation and hardware/materials.

Have prior experience in design for assembly or other aircraft program optimization activity, an asset.

Must have knowledge of aircraft structures (Primary & Secondary) & Systems Installations, hydraulics, fuel etc., detailed assembly installations and detailed drawings 3DMBD.

Must have knowledge of SAP, CATIA V5/ENOVIA and (GD&T) Geometric Dimensioning and Tolerance.

Must have excellent troubleshooting skills.

Have great communication skills: can explain complex problem in simple words.

Are able and efficient at managing several projects in parallel.

Have a high sense of commitment, and a willingness to accept responsibilities while acting independently in a high-pressure and production ramp-up environment.

Have working experience using Catia V5 and Microsoft tools.

Are bilingual (French and English), is an asset.

Are able to travel to on-site supplier in USA, Europe and Asia.
 
Job Number: 2585
Job Location: Canada
Rate: 56 USD
Per Diem: Paid - 3mt
Overtime: Paid - NOT at 1.5X
Duration: 12 mos
Start Date: ASAP
Input Date: 11/07/2019
Last Updated: 11/28/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Mechanics

Description:
STS Mod Center is now hiring A&P Mechanics to join its award-winning team in Melbourne, Florida.

Qualifications:
Previous three years AP experience.
Must have valid AP license.
Knowledge on the CRJ200 and genfams preferred.
Must hold a valid Driver License.
Must not be under a doctor’s care with limited work restrictions.
Must be able to pass a back ground check and obtain all necessary badging.
Must be able to ascend/descend ladders, stairs and work stands unassisted.
Must be able to bend, kneel, crawl and stoop frequently in confined spaces.
Must be able to lift up to 75 pounds unassisted.
Must be willing to work in an environment that is subject to changing climate conditions and moderate noise levels.
Must have excellent communication and people skills.
Must be able to exercise good judgment in a team environment as well as in aircraft maintenance and safety.
Must have problem solving and organizational skills.
Must be able to read and understand company and manufacturer Manuals.
Must be able to perform all line maintenance functions un-supervised at any time.
Must own and provide a minimum set of hand tools.
Benefits:
STS Mod Center offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-800-359-4787.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 48777
Job Location: Melbourne, FL
Input Date: 11/04/2019
Firm Name: STS AEROSTAFF SERVICES
Attention: STS Technical Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

APG Mechanic

Description:
Chipton-Ross is seeking an APG Mechanic for an opportunity in Greenville, SC

RESPONSIBILITIES:
Performs a variety of mechanical duties involving diagnosis of malfunctions and required maintenance, disassembly, rework, repair, replacement, re-assembly or adjustment of various aircraft systems in accordance with technical specifications, engineering instructions, and FAA regulations.

DESIRED EXPERIENCE:
C-130H 4-6 years

EDUCATION:
Accredited High School Diploma/GED

MISCELLANEOUS:
This work assignment has been designated as "safety-sensitive" by the Client. Contractors assigned to safety-sensitive jobs at the Client site must first complete regulatory pre-placement requirements prior to reporting to assignment. Additionally, contractors assigned to safety-sensitive work will be subject to random drug and alcohol testing in accordance with federal mandates.

WORK HOURS:
Full-Time, 9/80A-1st Shift

 
Job Number: 182559
Job Location: Greenville, SC
Rate: $DOE
Duration: 9 months
Input Date: 10/23/2019
Last Updated: 01/24/2020
Firm Name: CHIPTON ROSS
Attention: Cody Reposa
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: creposa@chiptonross.com
Website: www.chiptonross.com

APG Mechanic / C-130 - no clearance URGENT SC

Description:
166686
Job Title: APG Mechanic

Work Site Address: Greenville, SC 29605
Job Number: 2465-1
Max Pay Rate: $33.83/hr
Start Date: 11/4/2019
End Date: 7/31/2020
Position Type: Contract

Job Summary:
Performs a variety of mechanical duties involving diagnosis of malfunctions and required maintenance, disassembly, rework, repair, replacement, re-assembly or adjustment of various aircraft systems in accordance with technical specifications, engineering instructions, and FAA regulations.

Qualifications and Education Requirements
C-130H Experience


Skills: Category Name Required Importance Experience
Areas of Expertise C-130H No 1 4 - 6 Years

Qty 2 positions
 
Job Number: JEG-2465-1
Job Location: Greenville, SC
Rate: 33.38/hr max
Duration: 8 months
Input Date: 10/24/2019
Last Updated: 01/20/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
APG Mechanic / Engine and Propeller Rigging URGENT SC

Description:
166498 Job Title: APG Mechanic
Client Department or BU: Greenville
Job Category: Installation - Maint - repair

Work Site Address: Greenville, SC 29605
Job Number: 2193-1
Max Pay Rate: $29.00/hr
Start Date: 10/21/2019
End Date: 12/31/2019
Position Type: Contract

Job Summary:
This role has 3 open positions that the hiring manager is very eager to fill. Please send qualified candidates ASAP.

Job Description:
Performs a variety of mechanical duties involving diagnosis of malfunctions and required maintenance, disassembly, rework, repair, replacement, re-assembly or adjustment of various aircraft systems in accordance with technical specifications, engineering instructions, and FAA regulations. 8 years P3 Orion experience desired.

Engine and Propeller Rigging exp desired

Skills: Category Name Required Importance Experience
Areas of Expertise P-3 No 1 4 - 6 Years



Qty 3 positions required
 
Job Number: JEG-2193-1
Job Location: Greenville, SC
Rate: 29/hr max
Duration: 3 months +
Input Date: 10/15/2019
Last Updated: 11/11/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
****MUST be able to obtain a Secret Clearance****

Job Description:
1. The candidate selected must have demonstrated complete understanding and wide application of mass properties technical principles, theories and concepts and possess a general knowledge of other related disciplines and their relationship and impacts on weight, center of gravity, and inertia.
2. The candidate selected will represent the Mass Properties Management and Control organization for various airframe and systems related configuration change studies.
3. The candidate must exhibit the ability to provide imaginative, thorough, and practicable solutions to a wide range of difficult mass properties / weight management and control problems that are consistent with program objectives.
4. The candidate will use ongoing analysis to assure approved changes are fully reflected in aircraft level predictions.
5. The candidate must display an ability to work independently under general direction to meet program objectives.

Basic Qualifications:
1. Experience using a relational database
2. CATIA--Computer Aided Application
3. VAS--Visualization Assembly System
4. Strong SQL use and development skills
5. Strong Visual Basic or C++ use and development skills
6. SAWE RP8 use
7. Earned Value Management Systems (EVMS)
8. Strong technical leadership skills
9. Strong personal and presentation communication
10. Experience with engineering change requests/packages
11. Experience incorporating engineering design changes into a mass properties database system

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11708
Job Location: Fort Worth, TX
Rate: $57.48/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 10/11/2019
Last Updated: 12/13/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years. The most recent investigation completed within the last 5-years****

Job Description:
1. Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design.
2. Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations.
3. Will support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations.
4. Will work production floor support from receipt of problem, coordination of answer to release of engineering change.
5. Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight.
6. Establishes structural specifications, performs stress analysis, and conducts performance tests.

Education:
- Level 4: BS+16 YRS or MS+14 YRS
- Position will also require 2+ years MRB experience w/ metallic airframe
 
Job Number: 11583
Job Location: Palmdale, CA
Rate: $90.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 3 mos
Input Date: 09/30/2019
Last Updated: 01/22/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Aeronautical Engineer - Clearance CA

Description:
166409 Job Title: Aeronautical Engineer


Work Site Address: Palmdale, CA 93599
Job Number: 2071-1
Max Pay Rate: $80.00/hr
Start Date: 10/8/2019
End Date: 1/20/2020
Position Type: Contract


Job Summary:
Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design.

Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations. Will support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations. Will work production floor support from receipt of problem, coordination of answer to release of engineering change. Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight. Establishes structural specifications, performs stress analysis, and conducts performance tests.

Qualifications and Education Requirements
BS+16 YRS or MS+14 YRS
Position will require 2+ years MRB experience w/ metallic airframe

Qty 1 position
 
Job Number: JE-2071-1S
Job Location: Palmdale, CA
Rate: 80/hr max
Per Diem: pd split possible
Duration: 3 months +
Input Date: 01/17/2020
Last Updated: 01/20/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer / Mass Properties - no clearance TX

Description:
166555 Job Title: Aeronautical Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2226-1
Max Pay Rate: $56.20/hr M
Start Date: 12/2/2019
End Date: 12/31/2020
Position Type: Contract

Job Summary:
The candidate selected will represent the Mass Properties Management and Control organization for various airframe and systems related configuration change studies.

The candidate selected must have demonstrated complete understanding and wide application of mass properties technical principles, theories and concepts and possess a general knowledge of other related disciplines and their relationship and impacts on weight, center of gravity, and inertia.

The candidate must exhibit the ability to provide imaginative, thorough, and practicable solutions to a wide range of difficult mass properties / weight management and control problems that are consistent with program objectives. The candidate will use ongoing analysis to assure approved changes are fully reflected in aircraft level predictions. The candidate must display an ability to work independently under general direction to meet program objectives.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
Experience using a relational database
CATIA--Computer Aided Application
VAS--Visualization Assembly System
Strong SQL use and development skills
Strong Visual Basic or C++ use and development skills
SAWE RP8 use
Earned Value Management Systems (EVMS)
Strong technical leadership skills
Strong personal and presentation communication
Experience with engineering change requests/packages
Experience incorporating engineering design changes into a mass properties database system


Qty 1 position
 
Job Number: JE-2226-1
Job Location: Fort Worth, TX
Rate: 56.20/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 12/04/2019
Last Updated: 12/09/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Air Data Systems Engineer

Description:
• Develop air data systems design, architecture and support product plan development, including qualification and certification plans
• Provide subject matter expert level technical leadership, mentoring and guidance on both practical and theoretical aspects of air data systems
• Define requirements for the air data systems to ensure compliance with regulations and customer requirements
• Research new air data concepts and technologies that fit the technology roadmap
• Provide validation and verification of air data systems requirements


We're looking for someone who has:
• Bachelor’s Degree in relevant engineering area, with a Master’s degree in a technical and/or management specialty preferred
• 10+ years of deep, hands-on experience in air data and avionics systems development, design and testing in a Military, Commercial, or business aircraft development program
• 8+ years of demonstrated experience specific to air data systems, air data technical principles and technologies, and managing system suppliers as the technical point of contact
• In-depth and current knowledge of Part 25 regulatory requirements, including air data specific certification requirements (e.g. RVSM)
• Experience and expertise in the development of commercial and/or high-end business jets strongly desired, including flight test experience
• Recent experience in developing air data, avionics and other aircraft systems, such as Automatic Flight Control System (AFCS), from concept through certification strongly desired
• Optical air data systems experience desired
• Demonstrated ability to understand & define requirements, generate architecture, and achieve compliance


We want to build a company around people who are:
• Highly self-motivated with a strong bias for action
• Effective at nurturing strong professional relationships
• Committed to fostering a culture of empowerment & creativity

The Structures Company is AA/EOE.
 
Job Number: 324
Job Location: Reno, NV
Rate: OPEN - **DOE**
Per Diem: Yes
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 10/07/2019
Last Updated: 12/09/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Air Data Systems Engineer (Flight Controls Dept)

Description:
As the Air Data Systems Senior Engineer you will report to the Flight Control Systems IPT Lead and be responsible for all activities related to the air data systems for the jet. In addition to a more traditional Air Data system this aircraft may require development of an optical air data sensing system to enable our Mach Cutoff System (MCS) control concepts.

On any given day you might:
  • Develop air data systems design, architecture and support product plan development, including qualification and certification plans
  • Provide subject matter expert level technical leadership, mentoring and guidance on both practical and theoretical aspects of air data systems
  • Define requirements for the air data systems to ensure compliance with regulations and customer requirements
  • Research new air data concepts and technologies that fit the Aerion technology roadmap
  • Provide validation and verification of air data systems requirements

    We're looking for someone who has:
  • Bachelor’s Degree in relevant engineering area, with a Master’s degree in a technical and/or management specialty preferred
  • 10+ years of deep, hands-on experience in air data and avionics systems development, design and testing in a Military, Commercial, or business aircraft development program
  • 8+ years of demonstrated experience specific to air data systems, air data technical principles and technologies, and managing system suppliers as the technical point of contact
  • In-depth and current knowledge of Part 25 regulatory requirements, including air data specific certification requirements (e.g. RVSM)
  • Experience and expertise in the development of commercial and/or high-end business jets strongly desired, including flight test experience
  • Recent experience in developing air data, avionics and other aircraft systems, such as Automatic Flight Control System (AFCS), from concept through certification strongly desired
  • Optical air data systems experience desired
  • Demonstrated ability to understand & define requirements, generate architecture, and achieve compliance
     
  • Job Number: 42-030
    Job Location: Reno, NV
    Rate: DOE, but very competitive
    Per Diem: YES
    Overtime: Possible
    Duration: 1+ years
    Start Date: ASAP
    Input Date: 01/23/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Email: matt@precisionpersonnel.com
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Aircraft Door Design Engineer

    Description:
    General Summary:
    Engineer, Doors Design is responsible for the conceptual design and production engineering of Aircraft Doors structural and system components. The candidate will be responsible for conceptual layout, detailed design and aircraft production & in-service design and modification.

    Duties and Responsibilities:
    1. Generates Engineering Models and Drawings utilizing CATIA Version 5.
    2. Performs trade studies to identify optimal engineering solution.
    3. Collaborates with the Integrated Product Team to resolve cross functional issues.
    4. Reviews work performed by others and ensure work is to the highest standard.
    5. Implements Industry best engineering practices (design for manufacturing, design for reliability and design for maintainability).
    6. Have the ability to understand and apply certification requirements.
    7. Implement design solutions optimized for cost and weight.
    8. Manages task execution to ensure on-time and on-target completion.
    9. Utilizes drafting and Geometrical Dimensioning &Tolerancing knowledge to optimize part design for cost and functionality.
    10. Searches for problem root cause and develop corrective action plans and solutions.
    11. Serves as an interface within the Doors Engineering group to ensure effective communication, coordination, and timely completion of project milestones.
    12. Leads or participates in design / development reviews with management and internal customers. The candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience.

    Education, Work Experience, Certification and/or Licensure:

    1. BS in Mechanical Engineering with a minimum of 10 years directly related experience designing aviation systems; experience can be substituted for the lack of an appropriate degree
    2. Some Travel may be required

    Knowledge, Skills and Abilities:
    1. Proficient in use of CATIA Version 5.
    2. Advanced knowledge of drafting rules.
    3. Advanced knowledge of Geometrical Dimensioning and Tolerancing.
    4. Proficient in Microsoft Office Products.
    5. Use of Team Center.
    6. Familiar with FAR Part 23 or Part 25.
    7. Functional knowledge of SAP.



    The Structures Company is an AA/EOE.
     
    Job Number: 321
    Job Location: NC
    Rate: $60/Hr.
    Per Diem: Yes
    Overtime: Yes
    Duration: 12+ Months
    Start Date: ASAP
    Input Date: 11/06/2019
    Last Updated: 01/02/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Aircraft Interior Technicians

    Description:
    If rewarding company culture and career growth are terms that pique your professional interests, then you’re going to want to perk up and pay attention to the following…

    STS Mod Center is now hiring Aircraft Interior Technicians to join its award-winning team in Melbourne, Florida.

    These are full time, direct opportunities!

    Qualifications:
    Interiors – must have two/ three years previous experience with Commercial Aircraft MODS/Reconfigurations.
    Will be utilized as needed around the facility for various projects
    Must hold a valid Driver License
    Must not be under a doctor’s care with limited work restrictions
    Must be able to pass a background check and obtain all necessary badging
    Must be willing to work nights, weekends and holidays
    Must be able to ascend/descend ladders, stairs and work stands unassisted
    Must be able to bend, kneel, crawl and stoop frequently in confined spaces
    Must be able to lift up to 75 pounds unassisted
    Must be willing to work in an environment that is subject to changing climate conditions and moderate noise levels
    Must have excellent communication and people skills
    Must be able to exercise good judgment in a Team environment as well as in aircraft maintenance and safety
    Must have problem solving and organizational skills
    Must be able to read and understand Company and Manufacturer Manuals
    Must be able to perform all line maintenance functions un-supervised at any time
    Must own and provide a minimum set of hand tools
    Must be willing to work shift work and will rotate between midnights and days
    Benefits:
    STS Mod Center offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

    We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-800-359-4787.

    Thanks for taking the time, and we look forward to hearing from you soon.
     
    Job Number: 49624
    Job Location: Melbourne, FL
    Input Date: 11/04/2019
    Firm Name: STS AEROSTAFF SERVICES
    Attention: STS Technical Services
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 877/707-5767
    Fax Phone: 877/707-5767
    Website: www.stsaviationgroup.com

    Design Engineer - Interiors

    Description:
    POSITION SUMMARY:
    Provides all levels of engineering drawings related to interior cabin furnishing and components in support of VIP aircraft completions. Mentors other engineers on department techniques and processes. Must have aircraft interiors completions experience and experience designing monuments, galleys, credenzas, closets, beds, tables, etc.



    ESSENTIAL JOB FUNCTIONS:
    1. Develops advanced level design data packages for interior cabin furnishing in support of VIP aircraft completions.
    2. Utilizes airworthiness requirements and the project specification to create drawings.
    3. Creates and reviews engineering drawings, specifications, service bulletins, reports, etc.
    4. Performs research and design relating to the production of engineering drawings necessary for installation and completion of custom aircraft interiors.
    5. Prepares advanced level interior cabin furnishings reports, Engineering Authorizations (EA’s), drawings, and EO’s.
    6. Develops advanced level interior cabin furnishings modifications and installation work instructions, procedures and recommendations.
    7. Mentor and train less experienced engineers within department to increase overall efficiency of department.
    8. Identifies discrepancies and/or problems with drawings before releasing to production and implements correction action to ensure the timely release.
    9. Provides advanced level technical support and engineering disposition in order to resolve aircraft engineering/interior cabin furnishing problems.
    10. Using company procedures, applies engineering knowledge to resolve complex issues.
    11. Maintains advanced level awareness of FAA regulations and required compliance of FARs, ADs, SBs.
    12. Actively works to improve daily processes, and ensures all work meets completion aircraft requirements.
    13. Performs other duties as assigned.


    MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
    1. Bachelor’s Degree in Mechanical or Structural Aerospace Engineering or comparable.
    2. 2-5 years’ experience in Furnishings, Design or Structural Engineering.
    3. Familiarity with the Supplemental Type Certificate (STC) process

    REQUIRED SKILLS AND ABILITIES:
    1. Proficient with Microsoft Word, Excel, PowerPoint, Outlook, and Internet Explorer.
    2. Knowledge of Federal Aviation Regulations (FARs) governing aircraft certification Preferred.
    3. Ability to read, write, speak, and understand the English language.
    4. Computer Aided Drafting/Design - SolidWorks required
    5. Aviation background and electrical systems experience required.
    6. Strong knowledge of industry mechanical systems and documentation standards.
    7. Experience with electrical systems and components.
    8. Strong communication and problem-solving skills.
    9. Strong time-management and organizational skills.





    The Structures Company is an AA/EOE.
     
    Job Number: 339
    Job Location: IN
    Rate: $50-57/Hr. **DOE**
    Per Diem: Yes
    Duration: 12+ Months
    Start Date: ASAP
    Input Date: 01/24/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Email: debbieaubert@thestructurescompany.com
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Aircraft Maintenance Production Managers

    Description:
    STS Mod Center is hiring Aircraft Maintenance Production Managers in Melbourne, Florida.

    Qualifications:
    Must have minimum 5 years management experience.
    Must hold a valid Driver License.
    Must not be under a doctor’s care with limited work restrictions.
    Must be able to pass a back ground check and obtain all necessary badging.
    Must be able to ascend/descend ladders, stairs and work stands unassisted.
    Must be able to bend, kneel, crawl and stoop frequently in confined spaces.
    Must be able to lift up to 75 pounds unassisted.
    Must be willing to work in an environment that is subject to changing climate conditions and moderate noise levels.
    Must have excellent communication and people skills.
    Must be able to exercise good judgment in a team environment as well as in aircraft maintenance and safety.
    Must have problem solving and organizational skills. Must be able to read and understand company and manufacturer Manuals.
    Must be able to perform all line maintenance functions un-supervised at any time.
    Must own and provide a minimum set of hand tools
    Benefits:
    STS Mod Center offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

    We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-800-359-4787.

    Thanks for taking the time, and we look forward to hearing from you soon.
     
    Job Number: 49788
    Job Location: Melbourne, FL
    Input Date: 11/04/2019
    Firm Name: STS AEROSTAFF SERVICES
    Attention: STS Technical Services
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 877/707-5767
    Fax Phone: 877/707-5767
    Website: www.stsaviationgroup.com

    Aircraft Mechanic

    Description:
    Chipton-Ross is seeking a Product Repair/Mod Tech C for an opening in New Orleans, LA.

    RESPONSIBILITIES:
    This position is for an F-15 electrical and avionics subject matter expert. Applies advanced technical knowledge of F-15 systems to solve unusually complex problems that typically cannot be solved solely by referencing schematics, engineering data or similar documents. Assembles, disassembles and/or modifies systems by changing, removing, replacing or upgrading aerospace vehicle components to correct failures or implement changes. Configures aerospace vehicles and bench test equipment. Troubleshoots complex pneumatic, hydraulic and electrical systems to isolate mechanical or electrical faults and repair faulty components. Performs validation/verification testing of systems and components. Documents procedures and established processes to ensure contractual and regulatory compliance (e.g., repairs, test results, applicable modifications and inspection results). Inspects components and verifies repairs for flight worthiness requirements. Oversees training. Works under general direction.

    EDUCATION:
    Accredited high school diploma or GED and minimum 5 years experience (equivalent combination of required education and electrical experience in a modification environment).

    FULL TIME/FIRST SHIFT
    WORK HOURS: 6:00 AM - 4:30 PM

    TRAVEL: YES
    <10% ADDITIONAL REQUIREMENTS: This work assignment has been designated as "safety-sensitive" by the Client. Contractors assigned to safety-sensitive jobs at the Client site must first complete regulatory pre-placement requirements prior to reporting to assignment. Additionally, contractors assigned to safety-sensitive work will be subject to random drug and alcohol testing in accordance with federal mandates. MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
     
    Job Number: 182869
    Job Location: New Orleans, LA
    Rate: $DOE
    Duration: 12 Months
    Input Date: 11/06/2019
    Last Updated: 01/24/2020
    Firm Name: CHIPTON ROSS
    Attention: Michael Olivarez
    Address: 420 CULVER BLVD
    City, State: PLAYA DEL REY, CA 90293
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: molivarez@chiptonross.com
    Website: www.chiptonross.com

    Aircraft Mechanic II

    Description:
    Chipton-Ross is seeking an Aircraft Mechanic II for an opening in Lexington, KY.

    RESPONSIBILITIES
    This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals. Job requirements: must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects.

    REQUIREMENTS
    Desired Applicant must have experience and ability to operate or perform one or more of the following:
    Aircraft structural experience in modification to include but not limited to structural TM/TO repairs, build to print assembly and installation. The candidate must have a common knowledge of tooling required for performance of aircraft structural work. Must be a qualified aviation sheet metal mechanic, employee must have experience in aviation sheet metal, hardware installation such as rivet installation, HI-Loc installation, etc. Candidate must have fabrication to facilitate plane side repairs.
    Candidate must have advanced sheetmetal skills that can work with little direction on complex modifications.
    - Must be able to work shift schedules during this duration as required by program schedule and customer requirements.
    - Candidate must have a high school diploma, or equivalent.
    - Minimum 3 years intermediate level aircraft repair or modification experience required.
    - Must be proficient in reading and interpreting schematics, engineering drawings and technical manuals / technical orders.
    - Minimum 3 years experience with one of the listed airframes H-60, AH-64, CH-47 or OH-58.

    DESIRED
    MH-60M experience preferred.
    - Documented Military/DOD Service School or Civilian/FAA equivalent training desired.
    - Depot Maintenance Repair experience

    WORK SCHEDULE
    4/10

    MISCELLANEOUS:
    Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
     
    Job Number: 180169
    Job Location: Lexington, KY
    Rate: Up to $31.59 DOE
    Duration: 3 Months
    Input Date: 07/02/2019
    Last Updated: 01/24/2020
    Firm Name: CHIPTON ROSS
    Attention: Melody Mullins
    Address: 420 CULVER BLVD
    City, State: PLAYA DEL REY, CA 90293
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: mmullins@chiptonross.com
    Website: www.chiptonross.com

    Aircraft Mechanic II

    Description:
    Chipton-Ross is seeking an Aircraft Mechanic II for an opportunity in Lexington, KY

    RESPONSIBILITIES:
    This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals.

    REQUIRED EXPERIENCE:
    must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects.
    - Minimum 3 years intermediate level aircraft repair or modification experience required.
    - Must be proficient in reading and interpreting schematics, engineering drawings and technical manuals / technical orders.
    - Minimum 3 years experience with one of the listed airframes H-60, AH-64, CH-47 or OH-58.

    Desired skills :
    MH-60M experience preferred.
    - Documented Military/DOD Service School or Civilian/FAA equivalent training desired.
    - Applicants with a current active Secret level security clearance.
    - Depot Maintenance Repair experience

    EDUCATION:
    Accredited High School Diploma/GED

    MISCELLANEOUS:
    Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

    WORK HOURS:
    Full-Time, 4/10
    Must be able to work shift schedules during this duration as required by program schedule and customer requirements.
     
    Job Number: 180155
    Job Location: Lexington, KY
    Rate: $DOE
    Duration: 3 MONTHS
    Input Date: 07/01/2019
    Last Updated: 01/24/2020
    Firm Name: CHIPTON ROSS
    Attention: Emmanuel Morgan
    Address: 420 CULVER BLVD
    City, State: PLAYA DEL REY, CA 90293
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: emorgan@chiptonross.com
    Website: www.chiptonross.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Aircraft Painter - no clearance SC

    Description:
    166698
    Job Title: Aircraft Painter

    Work Site Address: Greenville, SC 29605
    Job Number: 2516-1
    Max Pay Rate: $29.00/hr
    Start Date: 11/4/2019
    End Date: 6/29/2020
    Position Type: Contract

    Job Summary:
    Coats surfaces of aircraft with paint, Polyurethane, lacquer, epoxy, resin or other material, using brushes, rollers, spray guns and other devices, removes old paint from aircraft, using liquid paint remover and scraper.

    Smoothes surface with sandpaper and steel wool, roughens aluminum surfaces with acid solution and steel wool to insure that paint adheres to surface, masks and covers portions of surfaces not to be painted, and applies markings to include minor and major markings using stencil materials, insignia, letters, or numerals, on aircraft surface, using stencils.

    Qualifications and Education Requirements
    Ability to operate snorkel and scissor lifts.

    Preferred Skills
    Skills: Category Name Required Importance Experience
    Areas of Expertise Paint Process No 1 2 - 4 Years

    Qty 2 positions
    Manager asked to please inform candidates that the LM facility closes for Christmas break.
     
    Job Number: JEG-2516-1
    Job Location: Greenville, SC
    Rate: 29/hr max
    Duration: 8 months
    Input Date: 11/26/2019
    Last Updated: 01/15/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Aircraft Sheet Metal Mechanics

    Description:
    STS Mod Center is now hiring Aircraft Sheet Metal Mechanics to join its award-winning team in Melbourne, Florida.

    Qualifications:
    Sheet Metal techs with a minimum of 3 years previous Modification, and Heavy Structures repairs on Large Regional and Large Commercial aircraft.
    A&P License is strongly preferred but not required.
    Benefits:
    STS Mod Center offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

    We know it takes great people to do great work, so if you’re interested in joining the STS Mod Center family, we encourage you to apply on this page. Have questions? Give us a call at 1-800-359-4787.

    Thanks for taking the time, and we look forward to hearing from you soon.
     
    Job Number: 48783
    Job Location: Melbourne, FL
    Input Date: 11/04/2019
    Firm Name: STS AEROSTAFF SERVICES
    Attention: STS Technical Services
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 877/707-5767
    Fax Phone: 877/707-5767
    Website: www.stsaviationgroup.com

    Aircraft Sheet Metal Technician-Several Shifts

    Description:
    Position Purpose:
    The Sheet metal Technician Senior works under minimal supervision to safely lay-out, fabricate and install parts equipment and fabricated items on aircraft following established operating procedures. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations. Mentor and train other Sheetmetal Technicians.

    Principle Duties and Responsibilities:
    1. Use complicated schematics/blueprints, engineering drawings and technical instructions to safely perform sheet metal layout, fabrication, and installation of parts, equipment or fabricated items on aircraft. Coordinate with supervision and Inspection to ensure compliance with internal and FAA paperwork, sign-offs and quality specifications.
    2. Mentor and train Sheetmetal Technicians, as required. Review their work prior to sign off to ensure work complies with quality control standards.
    3. Oversee projects or other technicians and assesses requirements of assigned tasks to procure required. materials and documentation for assigned tasks.
    4. Use blueprints to cut and form plastics and follow standard operating procedures when using adhesives, sealants and solvents.
    5. Utilizing tools as required. to shape and form complex angles and configurations according to blueprint specifications or written/verbal information.
    6. Safely operate shop equipment such as: brakes, presses, riveting equipment, shears, and hand tools associated with sheet metal functions. Use the proper hardware for various sheet metal applications.
    7. Comply with all safety, 5S, and housekeeping policies. Uses personal protective equipment as required. Ensures aircraft is protected (PTP).
    8. Conduct monthly 5S audits, as required.
    9. Use the material tracking system to create parts demand, track squawks and to sign-off work.
    10. Assist in developing initiatives to meet individual OGSM requirements, as required.
     
    Education and Experience Requirements:
    High School Diploma or GED required. Four (4) years of sheet metal and/or fabrication experience. Experience in aerospace industry preferred. Valid Driver’s License required.
    Other Requirements:
    1. Advanced knowledge of sheet metal or fabrication processes (forming, drilling, stamping, shaping, bending, punching, cutting, riveting, filing and dimpling).
    2. Ability to read and interpret blueprints and engineering documentation.
    3. Valid drivers license required. to operate towing and other transportation equipment.
    4. Ability to read, write, speak, and understand proficiently the English language.
     5. Demonstrates excellent communication skills, both verbal and written.
    6. Adapts to sudden schedule changes.
    7. Able to use tools and equipment associated with sheet metal work.
    8. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift.
    9. Must have a good working knowledge of computers and experience working with MicroSoft Office suite.
    10. Must be able to read, write, speak, and understand the English language.

    2-1st shift positions
    1-2nd shift position
    1-weekend shift position
     
    Job Number: 1910103713
    Job Location: Appleton, WI
    Duration: 12 months
    Input Date: 07/01/2019
    Last Updated: 01/24/2020
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Kristen Schabell
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GQqOQAW&URLSource=cjhunter

    Aircraft Stress Engineer Openings

    Description:
    Aircraft Stress Engineers needed.
    MUST BE US PERSONS.
    BS Degree a MUST.
    FEMAP is a plus but not required.
    Strong classical analysis/hand calcs a MUST.

    REQUIRED SKILLS AND ABILITIES:
    1. Familiarity with Federal Aviation Regulations (FARs) governing aircraft certification.
    2. Strong understanding of aircraft structural modifications (both interior and airframe).
    3. Strong command of classical hand-analysis techniques.
    4. Proficient with the following software:
    a. Microsoft Word, Excel, PowerPoint, Outlook, and Internet Explorer.
    b. NASTRAN/FEMAP(basic user skill, proficiency a plus)
    c. AutoCAD (basic user skill, proficiency a plus)
    d. SolidWorks (basic user skill, proficiency a plus)
    e. Visual Basic or other coding skills a plus
    Final 1-2017
    5. Strong knowledge of Finite Element Modeling and Analysis techniques.
    6. Ability to interpret design drawings of various aircraft modifications and identify design changes required to
    ensure that sound load paths and structural integrity are maintained.

    MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
    1. Bachelor’s Degree in Aerospace, Aeronautical, or Mechanical Engineering or the equivalent.
    2. Five (5) or more years of experience working in aircraft stress analysis - airframe or interiors/completions on transport category aircraft, installation designs, including but not limited to Supplemental Type Certificate (STC) work, structural
    substantiation analysis and report development, aircraft modification designs under 14 CFR Part 25 STC
    projects, and test plans and test report authoring and review.

    The Structures Company LLC is an AA/EOE.
     
    Job Location: IN
    Rate: Open / DOE
    Per Diem: Yes
    Overtime: Yes
    Duration: Long-term
    Start Date: ASAP
    Input Date: 12/30/2019
    Last Updated: 01/24/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Chris Sheets
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Email: ChrisSheets@thestructurescompany.com
    Website: www.thestructurescompany.com

    Aircraft Stress Engineers

    Description:
    Nastran, Patran a plus
     
    Job Location: GA/WI
    Input Date: 01/14/2015
    Firm Name: ADVANCED TECHNOLOGY
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Email: sclark@advancedtechno.com
    Website: www.advancedtechno.com

    Assembler A

    Description:
    Chipton-Ross is seeking 4 Assembler A's for openings in Smithfield, PA.

    RESPONSIBILITIES:
    Performs production assembly operations on structural and mechanical assemblies, subassemblies and aircraft systems, equipment and accessories using manual operations.

    EDUCATION:
    Education/experience typically acquired through basic education (e.g. high school diploma/GED).

    FULL TIME/FIRST SHIFT
    WORK HOURS: 7:00 AM - 3:30 AM


     
    Job Number: 182843
    Job Location: Smithfield, PA
    Rate: $DOE
    Duration: 12 Months
    Input Date: 11/06/2019
    Last Updated: 01/24/2020
    Firm Name: CHIPTON ROSS
    Attention: Christopher Conaway
    Address: 420 CULVER BLVD
    City, State: PLAYA DEL REY, CA 90293
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: cconaway@chiptonross.com
    Website: www.chiptonross.com

    Aviation Mechanics - Clearance

    Description:
    Seeking Experienced Aviation Mechanics for a contract opportunity in San Antonio, Texas!

    Work to be performed on a VIP aircraft, 747 platform and active Top Secret Clearance Required.
    Several Openings For:
    • General Mechanic
    • Electrical
    • Structures
    • Avionics Tech
    • Quality Inspection
    • Supply Chain Specialist


    Great Opportunity for Ex-military/Exiting Military/ and Veterans
    Previous military experience a plus!


     
    Experience performing routine maintenance, modifications, and rework on VIP - 747 aircraft.
    Required- Minimum of 5 years' experience working on 747 platform.
    Tools: no tools required
    Location: San Antonio, Texas

    ***Current Security Top Secret Clearance required
    US Citizenship Required: Clearance requirements will be used during resume screening. Individuals must hold a current Clearance or Equivalent Clearance/ investigation type to be considered for this position, clearance level must be noted on the resume. Must follow submittal procedures below for consideration. No phone calls please, only candidates that provide resumes with the job ID number will be contacted and considered for the opportunity.

    **submittal must reference Job ID number 1710063637

    Camille Zunker- czunker@pdstech.com
     
    Job Number: 1710063637
    Job Location: San Antonio, TX
    Duration: 12 months
    Input Date: 02/27/2017
    Last Updated: 01/24/2020
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Camille Zunker
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002GBZ0AAO&URLSource=cjhunter

    Avionic Technician

    Description:
    Chipton-Ross is seeking an Avionic Technician for an opportunity in Greenville, SC

    RESPONSIBILITIES:
    Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, engineering drawings and written or verbal instructions. Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions.

    DESIRED EXPERIENCE:
    Aircraft Modification 2-4 years and C-130H 2-4 years

    EDUCATION:
    Accredited High School Diploma/GED

    MISCELLANEOUS:
    This work assignment has been designated as "safety-sensitive" by the Client. Contractors assigned to safety-sensitive jobs at the Client site must first complete regulatory pre-placement requirements prior to reporting to assignment. Additionally, contractors assigned to safety-sensitive work will be subject to random drug and alcohol testing in accordance with federal mandates.

    WORK HOURS:
    Full-Time, 9/80A-1st Shift

     
    Job Number: 182557
    Job Location: Greenville, SC
    Rate: $DOE
    Duration: 9 months
    Input Date: 10/23/2019
    Last Updated: 01/24/2020
    Firm Name: CHIPTON ROSS
    Attention: Patrick Costello
    Address: 420 CULVER BLVD
    City, State: PLAYA DEL REY, CA 90293
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: pcostello@chiptonross.com
    Website: www.chiptonross.com

    Avionic Technician - no clearance URGENT SC

    Description:
    166688 Job Title: Avionic Technician

    Work Site Address: Greenville, SC 29605
    Job Number: 2464-1
    Max Pay Rate: $29.50/hr
    Start Date: 11/18/2019
    End Date: 7/31/2020
    Position Type: Contract

    Job Summary:
    Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, engineering drawings and written or verbal instructions.

    Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions.

    Skills: Category Name Required Importance Experience
    Areas of Expertise Aircraft Modification No 1 2 - 4 Years
    Areas of Expertise C-130H No 1 2 - 4 Years

    Qty 8 positions
    This is an URGENT request.
     
    Job Number: JEG-2464-1
    Job Location: Greenville, SC
    Rate: 29.50/hr max
    Duration: 8 months plus extension
    Input Date: 01/13/2020
    Last Updated: 01/20/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Email: jeana@midcom.com
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Avionic Technician / C-130 - no clearance URGENT URGENT URGENT SC

    Description:
    166338 Job Title: Avionic Technician

    Work Site Address: Greenville, SC 29605
    Job Number: 2095-1
    Max Pay Rate: $29.00/hr
    Start Date: 10/7/2019
    End Date: 1/31/2020
    Position Type: Contract

    HIRING MANAGER WILL CONSIDER ANY CANDIDATE WITH ANY C-130 EXPERIENCE

    Job Description:
    Performs operational checks, troubleshoot and repair electrical and avionics systems in a quality manner and ensure the integrity and correct operation of affected avionics/ electrical systems affected during modification and maintenance of aircraft. Essential Functions (Other duties may be assigned as required)
    • Reads and interprets engineering drawings, technical manuals, wiring diagrams understanding symbols flags and general notes.
    • Performs operational checks and troubleshoots essential navigation and communication systems such as RADAR, TACAN, ADF, UHF, VHF, HF, VOR/ILS and systems such as aircraft fuel, aircraft hydraulic, aircraft lighting, aircraft landing gear, aircraft ordnance, engine fuel, engine oil, engine propeller and the entire electrical power distribution.
    • Works with several types of measuring devices and test equipment required for operational/functional checks and troubleshooting of aircraft electrical and avionics systems.
    • Experienced in troubleshooting and flight line operations a must

    HIRING MANAGER WILL CONSIDER ANY CANDIDATE WITH ANY C-130 EXPERIENCE



    Qualifications and Education Requirements
    Needs to be really experienced in troubleshooting and flight line operations

    Preferred Skills
    Skills: Category Name Required Importance Experience
    Areas of Expertise C-130J Yes 1 4 - 6 Years
    Areas of Expertise Electrical Troubleshooting No 2 4 - 6 Years

    Qty 1 position needed
     
    Job Number: JEG-2095-1
    Job Location: Greenville, SC
    Rate: 29/hr max
    Duration: 3 -18 months
    Input Date: 12/17/2019
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    Avionic Technician / C-130 desired - no clearance SC

    Description:
    165856/1895-1
    Avionic Technician
    Greenville, SC 29605
    29/hr max

    Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, engineering drawings and written or verbal instructions. Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions. Installs wire harnesses in aircraft to include routing and termination.

    Areas of Expertise C-130 No 1 4 - 6 Years

    Qty 5 positions needed
    Candidate must have previous aircraft modification experience. Installs wire harnesses in aircraft to include routing and termination.
     
    Job Number: JEG-1895-1
    Job Location: Greenville, SC
    Rate: 29/hr max
    Duration: 6 months +
    Input Date: 11/01/2019
    Last Updated: 01/20/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Email: jeana@midcom.com
    Website: www.midcom.com

    Avionics & Electrical Design Engineers

    Description:
    SolidWorks aircraft electrical and avionics upgrades

    Immediate needs - email a resume and call our national recruiters
     
    Job Location: Nationwide
    Input Date: 06/12/2018
    Firm Name: ADDITIONAL CONTRACT SERVICES
    Address: 85 RANGEWAY RD BLDG 1 STE 2
    City, State: NORTH BILLERICA, MA 01862
    800 Phone: 800/661-8272
    Email: acs@acsnatl.com
    Website: www.acsnatl.com

    Avionics Engineer

    Description:
    Chipton-Ross is seeking an Avionics Engineer for an opportunity in Fort Worth, TX

    RESPONSIBILITIES:
    Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

    REQUIRED EXPERIENCE:
    Experience working electro-optic (EO) systems.

    Desired skills
    Active F-22 Project Clearance desired.
    The selected candidate will be assigned to the F-16/F-22 Integrated Fighter Group's (IFG) Sensors & Weapons team supporting the integration of electro-optic (EO) systems--including targeting, reconnaissance, and terrain-following pods--on F-16 aircraft. The candidate will assist in the development, integration, and testing of said systems as well as develop test procedures and document interfaces. The selected candidate will interface and coordinate with suppliers, program management, and other subsystem engineers to support program cost, schedule, quality, technical goals, and requirements. The selected candidate will also participate in solving technical problems, subcontract planning, and risk management.

    EDUCATION:
    Accredited Bachelor's degree in Aerospace Engineering, System Engineering, Computer Science, Electrical Engineering, Mechanical Engineering or related technical degree.

    MISCELLANEOUS:
    Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.


    WORK HOURS:
    Full-Time, 9/80-A

     
    Job Number: 182271
    Job Location: Fort Worth, TX
    Rate: $DOE
    Duration: 15 MONTHS
    Input Date: 10/11/2019
    Last Updated: 01/24/2020
    Firm Name: CHIPTON ROSS
    Attention: Robert Davis
    Address: 420 CULVER BLVD
    City, State: PLAYA DEL REY, CA 90293
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: rdavis@chiptonross.com
    Website: www.chiptonross.com

    Avionics Engineer

    Description:
    ****Candidate can start without a Secret Clearance, but must be able to obtain a Secret Clearance ****

    Job Description:
    1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
    2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

    Basic Qualifications:
    1. Bachelor's degree in Aerospace Engineering, System Engineering, Computer Science, Electrical Engineering, Mechanical Engineering or related technical degree.
    2. Experience working electro-optic (EO) systems.

    Desired Skills:
    1. Active F-22 Project Clearance desired.
    2. The selected candidate will be assigned to the F-16/F-22 Integrated Fighter Group's (IFG) Sensors & Weapons team supporting the integration of electro-optic (EO) systems--including targeting, reconnaissance, and terrain-following pods--on F-16 aircraft.
    3. The candidate will assist in the development, integration, and testing of said systems as well as develop test procedures and document interfaces.
    4. The selected candidate will interface and coordinate with suppliers, program management, and other subsystem engineers to support program cost, schedule, quality, technical goals, and requirements.
    5. The selected candidate will also participate in solving technical problems, subcontract planning, and risk management.

    Education:
    1. Level 1: BS+0-3 YRS
     
    Job Number: 11703
    Job Location: Fort Worth, TX
    Rate: $67.21/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 15 mos
    Input Date: 10/11/2019
    Last Updated: 01/22/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Email: patrick@inconen.com
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Avionics Engineer

    Description:
    ****MUST have an Active Secret Clearance or to have had one within the last 2 years****

    Job Description:
    1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
    2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

    Job Qualifications:
    1. Bachelor's degree in technical discipline
    2. Experience with Aircraft Avionics systems

    Desired Skills:
    1. Active F-22 Projects Clearance
    2. Experience presenting
    3. Experience with customer interaction
    4. Experience with AGILE
    5. Diligent at maintaining relevant members apprised of task status
    6. Experience with Microsoft Office tools (i.e. Excel, Outlook, and PowerPoint)

    Education:
    1. Level 1: BS+0-3 YRS
     
    Job Number: 11705
    Job Location: Fort Worth, TX
    Rate: $67.21/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 15 mos
    Input Date: 10/11/2019
    Last Updated: 01/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Avionics Engineer

    Description:
    ****MUST have an Active Secret Clearance or to have had one within the last 2 years****

    Job Description:
    1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
    2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

    Job Qualifications:
    1. Bachelors degree from an accredited college in a related discipline, or equivalent experience/combined education.
    Experience with aircraft systems

    Desired Skills:
    1. Experienced in design, development, integration and test of datalink systems.
    2. Familiar with DoD contracting and product acquisition.

    Education:
    1. Level 1: BS+0-3 YRS
     
    Job Number: 11681
    Job Location: Fort Worth, TX
    Rate: $60.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 15 mos
    Input Date: 10/09/2019
    Last Updated: 12/04/2019
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Avionics Engineer

    Description:
    ****MUST have an Active Secret Clearance or to have had one within the last 2 years****

    Job Description:
    1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
    2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

    Job Qualifications:
    1. Experience with Aircraft Avionics systems and/or the F-16 datalink systems (i.e., IDM, Link 16, MIDS).
    2. Familiarity with Avionics systems, Vehicle systems & the systems supporting integration & test and debug.
    3. Experience with the verification and sell off of a subsystem to a customer through formal test events.
    4. Experience developing subsystem design/engineering documentation.
    5. Experience with Agile Software Development and/or SCRUM processes.
    6. Strong oral written communication skills
    7. Strong interpersonal and collaboration skills
    8. Strong work ethic and self-motivation
    9. Strong Interpersonal & Collaboration Skills
    10. Proficient with MS Office products including Excel spreadsheet, scheduling and Database applications; excellent oral and written communication skills and analytical skills.
    11. Needs to have the ability to convey technical data and concepts in concise messages and presentations.

    Education:
    1. Level 2: BS+4-8 YRS or MS+2-6 YRS
     
    Job Number: 11680
    Job Location: Fort Worth, TX
    Rate: $70.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 15 mos
    Input Date: 10/09/2019
    Last Updated: 12/04/2019
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Avionics Engineer

    Description:
    ****MUST have an Active Secret Clearance or to have had one within the last 2 years****

    Job Description:
    1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
    2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

    Basic Qualifications:
    1. BS Electrical, Computer Engineering or related technical degree from an accredited college.
    2. Familiarity with Aircraft Avionics systems and the F-22 communication subsystem
    3. Open System Architecture (OSA) hardware experience
    4. Knowledge of Commercial off the shelf (COTS) hardware and implementation

    Desired Skills:
    1. Active F-22 Project Clearances
    2. Familiarity with F-22 Avionics systems, F-22 Vehicle systems and the systems supporting integration and test.
    3. System performance monitoring and evaluation experience.
    4. Electrical troubleshooting skills.
    5. Experience with Test and Measurement Equipment
    6. Scaled Agile Framework methodology
    7. Software development experience
    8. Proficient with Microsoft Office products including Excel spreadsheet, scheduling and Database applications;
    9. Excellent oral and written communication skills and analytical skills.
    10. Needs to have the ability to convey technical data and concepts in concise messages and presentations.
    11. Technical leadership skills a plus

    Education:
    1. Level 2: BS+4-8 YRS or MS+2-6 YRS
     
    Job Number: 11626
    Job Location: Fort Worth, TX
    Rate: $63.67/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 15 mos
    Input Date: 10/02/2019
    Last Updated: 01/02/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    Avionics Engineer

    Description:
    ****MUST have an Active Secret Clearance or to have had one within the last 2 years****

    Job Description:
    1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
    2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

    Basic Qualifications:
    1. Bachelors degree in Software/Electrical/Electronic Engineering or related technical degree.
    2. Experience with developing and delivering software

    Desired Skills:
    1. Experience with fixed wing aircraft datalink and
    Communication/Navigation/Identifications systems.
    2. Program management experience including; planning, scheduling, EVMS, risk management, configuration management and problem resolution
    3. An understanding of the build, integration, and test processes
    4. The ability to build and maintain effective working - relationships with customers, suppliers, peers and partners.

    Education:
    1. Level 2: BS+4-8 YRS or MS+2-6 YRS
     
    Job Number: 11627
    Job Location: Fort Worth, TX
    Rate: $63.67/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 15 mos
    Input Date: 10/02/2019
    Last Updated: 01/22/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Email: patrick@inconen.com
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Avionics Engineer

    Description:
    ****MUST have an Active Secret Clearance or to have had one within the last 2 years****

    Job Description:
    1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
    2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

    Basic Qualifications:
    1. BS in technical discipline and at least one year professional experience
    2. Familiarity with Aircraft Avionics systems and/or Mission Systems subsystem

    Desired Skills:
    1. Knowledge of RF, EW and/or CNI
    2. Ability to understand and apply electronics engineering principles to development
    3. Experience developing subsystem design/engineering documentation.
    4. A working knowledge of tools for requirements and verification Traceability.
    5. Experience with Agile Methodology
    6. Ability to work with suppliers to generate verification and validation plans
    7. Strong oral written communication skills
    8. Strong interpersonal and collaboration skills
    9. Strong work ethic and self-motivation

    Education:
    1. Level 1: BS+0-3 YRS
     
    Job Number: 11625
    Job Location: Fort Worth, TX
    Rate: $67.21/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 15 mos
    Input Date: 10/02/2019
    Last Updated: 01/02/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Avionics Engineer

    Description:
    ****MUST have an Active Secret Clearance or to have had one within the last 2 years****

    Job Description:
    1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
    2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

    Basic Qualifications:
    1. Experience in Electronic Warfare operations, implementation, or aircraft integration

    Desired Skills:
    1. MATLAB and/or C++ for analysis tool development
    2. Familiarity with JSF avionics suite and systems engineering processes.
    3. Familiarity with data analysis tools (e.g. Matlab)
    4. Familiarity with JSF tools including SIMS and Dimensions
    5. Familiarity with the F-35 Mission Systems design of Radar, Electronic Warfare / Countermeasures, and Fusion.
    6. Microsoft Office products including Excel spreadsheet, scheduling and Database applications experience
    7. Good oral and written communication skills and have the ability to convey technical data in concise messages and presentations.

    Education:
    1. Level 2: BS+4-8 YRS or MS+2-6 YRS
     
    Job Number: 11628
    Job Location: Fort Worth, TX
    Rate: $63.67/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 15 mos
    Input Date: 10/02/2019
    Last Updated: 01/02/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Avionics Engineer

    Description:
    ****MUST have an Active Secret Clearance or to have had one within the last 2 years****

    Job Description:
    1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
    2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

    Basic Qualifications:
    1. Bachelor's degree in a related technical field
    2. Experience with mission systems/avionics

    Desired Skills:
    1. Knowledge of integrated CNI systems (e.g., F-35 or F-22), INS, and/or GPS concepts, operations, implementation, aircraft integration, and usage.
    2. Knowledge of CNI functions (voice radios, data links, Link 16, TACAN, IFF, crypto).
    3. Experience in RF and/or CNI systems, Integration & Test, flight test, data analysis.
    4. Prior supplier management experiences a plus.
    5. Familiarity with JSF toolsets: SIMS & PDM.
    6. Current F-35 program experience and clearances.
    7. Must be able to acquire a SAR clearance.
    8. CNI, Radar, EW, or related avionics functions technology, and product development experience.
    9. Must be able to travel a moderate amount domestically to subcontractor and US government facilities in support of subsystem development and test.

    Education:
    1. Level 2: BS+4-8 YRS or MS+2-6 YRS
     
    Job Number: 11623
    Job Location: Fort Worth, TX
    Rate: $63.67/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 15 mos
    Input Date: 10/02/2019
    Last Updated: 01/02/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Avionics Engineer / F-16 datalink systems / integration test- Clearance TX

    Description:
    166533 Job Title: Avionics Engineer

    Work Site Address: Fort Worth, TX 76108
    Job Number: 2183-1
    Max Pay Rate: $70.00/hr
    Start Date: 10/22/2019
    End Date: 1/22/2021
    Position Type: Contract

    Job Summary:
    Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.

    Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

    Qualifications and Education Requirements
    BS+4-8 YRS or MS+2-6 YRS
    Exp w/ Aircraft Avionics systems and/or the F-16 datalink systems (i.e., IDM, Link 16, MIDS).
    Familiarity with Avionics systems, Vehicle systems & the systems supporting integration & test and debug.
    Experience with the verification and sell off of a subsystem to a customer through formal test events.
    Experience developing subsystem design/engineering documentation.
    Experience with Agile Software Development and/or SCRUM processes.
    Strong oral written communication skills
    Strong interpersonal and collaboration skills
    Strong work ethic and self-motivation
    Strong Interpersonal & Collaboration Skills
    Proficient with MS Office products including Excel spreadsheet, scheduling and Database applications
    Excellent oral and written communication skills and analytical skills.
    Needs to have the ability to convey technical data and concepts in concise messages and presentations.


    Qty 1 position
     
    Job Number: JE-2183-1S
    Job Location: Fort Worth, TX
    Rate: 70/hr max
    Per Diem: pd split possible
    Duration: 15 months
    Input Date: 12/05/2019
    Last Updated: 12/09/2019
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Avionics Engineer - Clearance TX

    Description:
    166417
    Job Title: Avionics Engineer

    Work Site Address: Fort Worth, TX 76108
    Job Number: 2147-1
    Max Pay Rate: $65.00/hr
    Start Date: 10/15/2019
    End Date: 1/15/2021
    Position Type: Contract

    Job Summary:
    Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
    Job Description: Should NOT include client name, rates or security clearance requirements. What is provided here WILL be on the Job Board
    Roles and Responsibilities
    Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

    Qualifications and Education Requirements
    BS+0-3 YRS
    Basic Qualifications
    BS in technical discipline and at least one year professional experience
    Familiarity with Aircraft Avionics systems and/or Mission Systems subsystem

    Desired skills
    Knowledge of RF, EW and/or CNI
    Ability to understand and apply electronics engineering principles to development
    Experience developing subsystem design/engineering documentation.
    A working knowledge of tools for requirements and verification Traceability.
    Experience with Agile Methodology
    Ability to work with suppliers to generate verification and validation plans
    Strong oral written communication skills
    Strong interpersonal and collaboration skills
    Strong work ethic and self-motivation

    Qty 1 position
     
    Job Number: JE-2147-1S
    Job Location: Fort Worth, TX
    Rate: 65/hr max
    Per Diem: pd split possible
    Duration: 15 months
    Input Date: 10/02/2019
    Last Updated: 01/02/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    Avionics Engineer / avionics flight control systems - Clearance TX

    Description:
    166422
    Job Title: Avionics Engineer

    Work Site Address: Fort Worth, TX 76108
    Job Number: 2146-1
    Max Pay Rate: $62.00/hr
    Start Date: 10/15/2019
    End Date: 1/15/2021
    Position Type: Contract

    Job Summary:
    Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.

    Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

    Qualifications and Education Requirements
    BS+4-8 YRS or MS+2-6 YRS
    Basic Qualifications
    - Bachelors degree in Software/Electrical/Electronics Engineering or related technical degree.
    - Experience with developing and delivering software
    Desired skills
    - Experience with fixed wing aircraft datalink and
    Communication/Navigation/Identifications systems.
    - Program management experience including; planning, scheduling, EVMS, risk management, configuration management and problem resolution
    - An understanding of the build, integration, and test processes
    - The ability to build and maintain effective working - relationships with customers, suppliers, peers and partners.

    Qty 1 position
     
    Job Number: JE-2146-1S
    Job Location: Fort Worth, TX
    Rate: 62/hr
    Per Diem: pd split possible
    Duration: 15 months
    Input Date: 01/08/2020
    Last Updated: 01/20/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Email: jeana@midcom.com
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Avionics Engineer - Clearance TX

    Description:
    166418
    Job Title: Avionics Engineer

    Work Site Address: Fort Worth, TX 76108
    Job Number: 2148-1
    Max Pay Rate: $62.00/hr
    Start Date: 10/15/2019
    End Date: 1/15/2021
    Position Type: Contract

    Job Summary:
    Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.

    Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

    Qualifications and Education Requirements
    BS+4-8 YRS or MS+2-6 YRS
    BS Electrical, Computer Engineering or related technical degree from an accredited college.

    Basic Qualifications
    BS Electrical, Computer Engineering or related technical degree from an accredited college.
    Familiarity with Aircraft Avionics systems and the F-22 communication subsystem
    Open System Architecture (OSA) hardware experience
    Knowledge of Commercial off the shelf (COTS) hardware and implementation

    Desired skills
    Active F-22 Project Clearances
    Familiarity with F-22 Avionics systems, F-22 Vehicle systems and the systems supporting integration and test.
    System performance monitoring and evaluation experience.
    Electrical troubleshooting skills.
    Experience with Test and Measurement Equipment
    Scaled Agile Framework methodology
    Software development experience
    Proficient with Microsoft Office products including Excel spreadsheet, scheduling and Database applications;
    Excellent oral and written communication skills and analytical skills.
    Needs to have the ability to convey technical data and concepts in concise messages and presentations.
    Technical leadership skills a plus

    Qty 1 position
     
    Job Number: JE-2148-1S
    Job Location: Fort Worth, TX
    Rate: 62/hr
    Per Diem: pd split possible
    Duration: 15 months
    Input Date: 10/02/2019
    Last Updated: 01/02/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Avionics Engineer - Clearance TX

    Description:
    166415
    Job Title: Avionics Engineer

    Work Site Address: Fort Worth, TX 76108
    Job Number: 2084-1
    Max Pay Rate: $62.26/hr
    Start Date: 11/5/2019
    End Date: 2/5/2021
    Position Type: Contract

    Job Summary:
    Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.

    Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

    Qualifications and Education Requirements
    BS+4-8 YRS or MS+2-6 YRS

    CNI, Radar, EW, or related avionics functions technology, and product development experience.
    Must be able to travel a moderate amount domestically to subcontractor and US government facilities in support of subsystem development and test.

    Basic Qualifications
    Bachelor's degree in a related technical field
    Experience with mission systems/avionics

    Desired skills
    Knowledge of integrated CNI systems (e.g., F-35 or F-22), INS, and/or GPS concepts, operations, implementation, aircraft integration, and usage.
    Knowledge of CNI functions (voice radios, data links, Link 16, TACAN, IFF, crypto).
    Experience in RF and/or CNI systems, Integration & Test, flight test, data analysis.
    Prior supplier management experience a plus.
    Familiarity with JSF toolsets: SIMS & PDM.
    Current F-35 program experience and clearances.

    Qty 2 positions
     
    Job Number: JE-2084-1S
    Job Location: Fort Worth, TX
    Rate: 62/hr max
    Per Diem: pd split possible
    Duration: 15 months
    Input Date: 12/16/2019
    Last Updated: 01/02/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Avionics Engineer - Clearance TX

    Description:
    166435
    Job Title: Avionics Engineer

    Work Site Address: Fort Worth, TX 76108
    Job Number: 2137-1
    Max Pay Rate: $62.00/hr
    Start Date: 10/15/2019
    End Date: 1/15/2021
    Position Type: Contract


    Job Summary:
    Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.

    Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

    Qualifications and Education Requirements
    BS+9-15 YRS or MS+7-13 YRS
    Basic Qualifications
    • Experience in Electronic Warfare operations, implementation, or aircraft integration

    Desired skills
    • MATLAB and/or C++ for analysis tool development
    • Familiarity with JSF avionics suite and systems engineering processes.
    • Familiarity with data analysis tools (e.g. Matlab)
    • Familiarity with JSF tools including SIMS and Dimensions
    • Familiarity with the F-35 Mission Systems design of Radar, Electronic Warfare / Countermeasures, and Fusion.
    • Microsoft Office products including Excel spreadsheet, scheduling and Database applications experience
    • Good oral and written communication skills and have the ability to convey technical data in concise messages and presentations

    Preferred Skills
    Skills: Category Name Required Importance Experience
    Software Skills C++ No 1
    Software Skills Matlab No 1


    Qty 2 positions
     
    Job Number: JE-2137-1S
    Job Location: Fort Worth, TX
    Rate: 62/hr max
    Per Diem: pd split possible
    Duration: 15 months
    Input Date: 10/01/2019
    Last Updated: 01/02/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Avionics Systems Engineer

    Description:
    The Avionics Engineer will be responsible for the design, development, and integration of the assigned avionic systems for the HondaJet aircraft.

    Duties and Responsibilities:
    1. Define, plan, and develop complex systems level requirements to support the avionic systems for the HondaJet aircraft.
    2. Perform systems level integration activities for aircraft avionic systems including: Control and Display Systems; Navigations Systems; Communication Systems; Surveillance Systems; and Cabin Management Systems
    3. Interface with suppliers to ensure technical requirements are met to support aircraft development need dates.
    4. Provide technical assistance to production and customer service departments for support of system technical inquires and issue resolution.
    5. Perform system evaluation and analysis to verify the system design compliance with functional requirements.
    6. Coordinate with cross-functional team members to complete assignments/projects as defined and on schedule.
    7. Develop targeted system level enhancements to address customer feedback and product improvement initiatives.
    8. Conduct system lab testing and aircraft functional testing.
    9. Prepare presentations on avionics system design/development status.
    10. Support system analyses for avionic systems.

    Education, Work Experience, Certification and/or Licensure:
    1. Bachelors’ degree in Engineering from a four year college or university; preferably in Electrical/Electronic Engineering.
    2. Minimum of 6 years’ experience working with integrated aircraft avionic systems in the areas of design engineering, system analysis, and system test.

    Knowledge, Skills and Abilities:
    1. Working knowledge of design requirements of 14CFRPart 23.
    2. Proficiency in writing technical documentation and reports involving test data and analysis.
    3. Familiarity with avionics/electrical test laboratories and lab equipment.
    4. Working knowledge of System qualification requirements including DO-160E/F for environmental, DO-178B for software, and DO-254 for complex electronic hardware.
    5. Proficiency in Microsoft Office suite (Word, Excel, Project, PowerPoint is required.
    6. Proficiency in requirements management tools such as DOORS
    7. Proficiency in PLM Tools such as TeamCenter and SAP.
    8. Ability to handle complex work assignments.
    9. Ability to work independently and within a multi-functional team environment.
     
    Job Number: 28-006
    Job Location: Greensboro, NC
    Rate: $55 - $65/hr
    Per Diem: Yes
    Overtime: Possible
    Duration: 1+ years
    Start Date: ASAP
    Input Date: 10/23/2019
    Last Updated: 11/12/2019
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Avionics Technicians

    Description:
    STS Mod Center is hiring Avionics Technicians in Melbourne, Florida.

    Qualifications:
    Must have a minimum of three (3) years experience performing modifications, installations and troubleshooting large regional and commercial aircraft
    A valid FAA Aircraft & Powerplant license is preferred but not required
    Must hold a valid Driver License.
    Must not be under a doctor’s care with limited work restrictions.
    Must be able to pass a back ground check and obtain all necessary badging.
    Must be able to ascend/descend ladders, stairs and work stands unassisted.
    Must be able to bend, kneel, crawl and stoop frequently in confined spaces.
    Must be able to lift up to 75 pounds unassisted.
    Must be willing to work in an environment that is subject to changing climate conditions and moderate noise levels.
    Must have excellent communication and people skills.
    Must be able to exercise good judgment in a team environment as well as in aircraft maintenance and safety.
    Must have problem solving and organizational skills. Must be able to read and understand company and manufacturer Manuals.
    Must be able to perform all line maintenance functions un-supervised at any time.
    Must own and provide a minimum set of hand tools
    Benefits:
    STS Mod Center offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

    We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-800-359-4787.

    Thanks for taking the time, and we look forward to hearing from you soon.
     
    Job Number: 47878
    Job Location: Melbourne, FL
    Input Date: 11/04/2019
    Firm Name: STS AEROSTAFF SERVICES
    Attention: STS Technical Services
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 877/707-5767
    Fax Phone: 877/707-5767
    Website: www.stsaviationgroup.com

    Business Manager - Engineering Services

    Description:
    Job Title:      Business Manager Engineering Services
    Location:      Seattle, WA
    Salary:           Base + Commission
    Job Type:      Full Time w/ benefits
     
      

    PDS Tech, a leader of high-value contingent staffing and SOW solutions has recently joined the AKKA Technologies Group.

    AKKA Technologies is a global leader operating in Engineering and Technology Consulting. With more than 21,000 experts, we are at the forefront of the digital and connected world accelerating innovation and time to market for the world’s largest industrial groups. We support our clients throughout the life cycle of their products. We provide them with expertise that encompasses the entire technological product environment and support them in bringing their product to market.

    Today, its North American branch is looking for a Business Manager (2-5 years of exp) who would like to join a dynamic and growing company in Seattle, to support its business development in the Aerospace sector. The position is to be filled in Seattle, as soon as possible.
     
    Description/Tasks
    Within the Puget Sound region, the candidate will be focus on bringing high added value Engineering Service solutions to Aerospace customers in the fields of Mechanical Engineering, HW/SW development, Systems Engineering, Electrical Engineering, Tests, Manufacturing Engineering, Airworthiness, Customer Support, Aircraft Modification, and Digital Transformation.
    The candidate should have capacity to:

    • Identify, develop and close new sales opportunities with Aerospace actors (OEM, MRO, Airlines…)
    • Develop customer relationships
    • Steering call for tender, financial proposal, team selection.
    • Management of resources working on projects
    • Steering project and deliveries.
    • Being target and results oriented
    • Start date:  ASAP.

    Qualification/Experience
    • At least 2 years’ experience in aeronautics, in Engineering or Sales.
    • Minimum of Engineering Bachelor’s degree or similar from an accredited university.
    • Excellent presentation and communication skills are required.
    • Dynamic, hard-worker and passionate for technologies
    • Availability for business trip/travel in different states.
    • Home base: Seattle area.


    More information on AKKA Technologies Group can be found on www.akka-technologies.com

    PDS Tech, Inc. is an Equal Opportunity Employer and will not discriminate against applicants on the basis of race, color, religion, sexual orientation, gender identity, national origin, veteran status, or disability.




     
     
     
    Job Number: 1910106765
    Job Location: Renton, WA
    Duration: 12 months
    Input Date: 09/24/2019
    Last Updated: 01/24/2020
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Stacy Smith
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fJkRQAU&URLSource=cjhunter

    C++ Real Time Software Engineers

    Description:
    Software Engineers
    Positions can be located at multiple sites:
    Oklahoma City, OK 73145 / 73150 / 73135
    El Segundo, CA 90245

    Secret, TOP Secret AND non-cleared positions, at various skill levels

    Tasks may include:
    • Lead, Develop and Maintain Code and integrate software components into a fully functional software system.
    • Develop, document, and maintain architectures, requirements, algorithms, interfaces and designs for software systems.
    • Requirements analysis, design, development, test, documentation, licensing, troubleshooting, and user support; custom operating system development; tool design and maintenance; research and development projects; trade studies; risk assessments; and support to software testing.
    • Execution of systems and software testing to verify operational and functional requirements. Assists with test procedures and documenting test results to ensure software system requirements are met.
    • Support software project management and software supplier management functions.
    • Select, tailor and deploy processes and tools; establish metrics.
    • Design, develop, implement, test and document software for surveillance aircraft platforms that enable air superiority by detecting, identifying, and tracking airborne threats and providing operators intuitive battle management controls.
    • Serve as a subject matter expert for software domains, system-specific issues, processes and regulations.
    • Positions include Leads as well as team members in the avionics software organization working closely with other software engineers, systems engineers, other disciplines, customers, suppliers and field service representatives.

     Bachelor's degree in an engineering classification.
     
    Experience with any of the following:
    • C, C++, C#, Java, ADA, DXL, Chef, Puppet, Ansible
    • Java Script, Python, shell, Perl Scripting languages
    • Rhapsody, Rational, TFS, ClearCase, ClearQuest, Team Concert, Jenkins, Coverity, Eclipse
    • Real Time, Embedded, ROTS, Doors, Agile
    • Unix, Linux Windows
       

    Contact Elisabeth Laspe at 314-482-3991 or elaspe@pdstech.com to discuss these opportunities.
     
    Job Number: 1810088612
    Job Location: Lexington Park, MD
    Duration: 12 months
    Input Date: 09/11/2018
    Last Updated: 01/24/2020
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Elisabeth Laspe
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mcb7AAA&URLSource=cjhunter

    Combat AirCraft Training Spec 5

    Description:
    PDS Tech Inc is seeking a Combat Aircraft Training Tech Specialist for an open position in Saint Louis, MO.

    Summary:
    • Weapon System Officer Subject Matter Experts to develop a Training Needs Analysis for the F/A-18EF H-14 Software update and must have H-12 Software experience. Works under consultative direction.


     

     
    Job Number: 1910105893
    Job Location: Saint Louis, MO
    Duration: 4 months
    Input Date: 08/23/2019
    Last Updated: 01/24/2020
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Mary Ann McCarthy
    Address: 1215 FERN RIDGE PKWY STE 231
    City, State: ST LOUIS, MO 63141
    Phone: 314/628-9143
    800 Phone: 800/472-3737
    Fax Phone: 314/628-9485
    Email: cecjstlouis@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GYVqQAO&URLSource=cjhunter

    Combat AirCraft Training Spec 5 - G

    Description:
    PDS Tech Inc is seeking a Combat Aircraft Training Tech Specialist for an open position in Saint Louis, MO.

    Summary:
    • Weapon System Officer Subject Matter Experts to develop a Training Needs Analysis for the F/A-18EF H-14 Software update and must have H-12 Software experience. Works under consultative direction.


     

     
    Job Number: 1910105894
    Job Location: Saint Louis, MO
    Duration: 4 months
    Input Date: 08/23/2019
    Last Updated: 01/24/2020
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Mary Ann McCarthy
    Address: 1215 FERN RIDGE PKWY STE 231
    City, State: ST LOUIS, MO 63141
    Phone: 314/628-9143
    800 Phone: 800/472-3737
    Fax Phone: 314/628-9485
    Email: cecjstlouis@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GYVvQAO&URLSource=cjhunter

    Combat AirCrft Trng Spec 5 -

    Description:
    PDS Tech Inc is seeking a Combat Aircraft Training Tech Specialist for an open position in Saint Louis, MO.

    Summary:
    • Weapon System Officer Subject Matter Experts to develop a Training Needs Analysis for the F/A-18EF H-14 Software update and must have H-12 Software experience. Works under consultative direction.


     
    Education/experience typically acquired through advanced education (e.g. Bachelor) and typically 15 or more years' related work experience or an equivalent combination of education and experience (e.g. Master+13 years' related work experience, 19 years' related work experience, etc.).
     
    Job Number: 1910105892
    Job Location: Saint Louis, MO
    Duration: 4 months
    Input Date: 08/19/2019
    Last Updated: 01/24/2020
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Mary Ann McCarthy
    Address: 1215 FERN RIDGE PKWY STE 231
    City, State: ST LOUIS, MO 63141
    Phone: 314/628-9143
    800 Phone: 800/472-3737
    Fax Phone: 314/628-9485
    Email: cecjstlouis@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GYVlQAO&URLSource=cjhunter

    Combat Aircraft Training Specialist - Secret

    Description:
    PDS Tech Inc is seeking a Combat Aircraft Training Tech Specialist for an open position in Saint Louis, MO.

    Summary:
    • Weapon System Officer Subject Matter Experts to develop a Training Needs Analysis for the F/A-18EF H-14 Software update and must have H-12 Software experience. Works under consultative direction.


     

     
    Job Number: 1910105895
    Job Location: Saint Louis, MO
    Duration: 4 months
    Input Date: 08/23/2019
    Last Updated: 01/24/2020
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Mary Ann McCarthy
    Address: 1215 FERN RIDGE PKWY STE 231
    City, State: ST LOUIS, MO 63141
    Phone: 314/628-9143
    800 Phone: 800/472-3737
    Fax Phone: 314/628-9485
    Email: cecjstlouis@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GYW0QAO&URLSource=cjhunter

    Combat Aircraft Training Specialist 5

    Description:
    Chipton-Ross is seeking a Combat Aircraft Training Specialist 5 for an openings in Saint Louis, MO.

    RESPONSIBILITIES:
    EA-18G highly experience Pilot Subject Matter Expert to develop a Training Needs Analysis for the F/A-18EF H-14 Software update and must have H-12 Software experience. Works under consultative direction.

    EDUCATION:
    Accredited Education/experience typically acquired through advanced education (e.g. Bachelor) and typically 15 or more years' related work experience or an equivalent combination of education and experience (e.g. Master+13 years' related work experience, 19 years' related work experience, etc.).

    FULL TIME/FIRST SHIFT
    WORK HOURS: 8:00 AM - 5:00 PM

    MISCELLANEOUS:
    Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
     
    Job Number: 181309
    Job Location: Saint Louis, MO
    Rate: $DOE
    Duration: 4 Months
    Input Date: 08/27/2019
    Last Updated: 01/24/2020
    Firm Name: CHIPTON ROSS
    Attention: Daniel McGowan
    Address: 420 CULVER BLVD
    City, State: PLAYA DEL REY, CA 90293
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: dmcgowan@chiptonross.com
    Website: www.chiptonross.com

    Composite Structural Design Engineer Openings

    Description:
    Design and configuration of composite primary aircraft structure.
    Experience during preliminary/conceptual design phase required.
    Support of subsystems integration and packaging into primary structure.
    Strong knowledge and understanding of latest structural design, as well as manufacturing trends in the Aerospace industry.
    Analyze the applicability of new and emerging technologies and advanced techniques.
    Serve as a design focal between the program and Tier 1 suppliers.
    Provide technical support in design and development of the preliminary structures layout that meets weight, cost, manufacture-ability and certification requirements.
    Support new business development, trade studies and proposal activities.
    Support technical review of supplier capabilities and progress.

    Requirements:
    Must be a US or Canadian citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772.
    Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure / confidentiality agreement with current or any former employer that would prevent you from fully performing the duties of the position.
    Must have a bachelor’s degree in Aerospace or Mechanical Engineering, or similarly related area.
    8+ years of experience in performing design of large aerospace structures.
    Strong composite structural design background.
    Proficiency with CATIA V5 and Teamcenter PLM is preferred.
    Knowledge of the conceptual and preliminary design phases of aircraft development is strongly preferred.
    Thorough understanding of the structural design requirements for Part 25 certification is preferred.
    Highly self-motivated with a strong bias for action, and excellent problem-solving skills across multi-disciplinary skill sets.

    The Structures Company, LLC is an AA/EOE.
     
    Job Location: Reno, NV
    Rate: Open
    Per Diem: Yes
    Overtime: Possible
    Duration: Long-term
    Start Date: ASAP
    Input Date: 01/08/2020
    Last Updated: 01/24/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Chris Sheets
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Email: chrissheets@thestructurescompany.com
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Composite Technician (20+ openings)

    Description:
    Job Description
    Come work for a great company with great benefits! We need guys for all shifts (weekends, nights, days, holidays). Six to eight-month contract with the potential of converting to a permanent employee. Aerospace experience preferred.
    Composites fabrication & sub-assembly:
    • Fabrication of parts using wet layup and pre-impregnated composite materials
    • Knowledge of properly preparing tooling for layup (Clean, seal, release)
    • Placement and consolidation of composite materials in tooling
    • Grinding, cutting, and trimming of parts
    • Working knowledge of composite specific equipment including ovens, Gerber cutting machines, and Virtek laser computers.
    • Bonding composite structures
    • Hand-finishing parts to proper fitment
    • Wet layup with multiple resin systems and fabrics
    • Locating parts and creating fixtures to blueprints and / or engineering instructions
    • Attention to detail and ability to self-inspect work to ensure quality defects are mitigated
    Required:
    • 3+ years of experience with composites or aircraft fabrication and assembly preferred.
    • Flexible to work overtime/modified/Non-standard shifts preferred
    • 5S/FOD/Tool control programs mandatory
    • Ability to perform repairs on composite structures
    • Experienced with quality inspection points and process documentation.
    • Knowledge of resins, mixing, ratios, and paste mixes.
    Physical Requirements
    • Must be able to stand for extended periods – 8 hours min.
    • Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces.
    • Physically able to handle items weighing up to 40lbs (unassisted).
    • Working in confined spaces
    • Working on Elevated Platforms
    Job Type: Full-time
    Salary: $16.00 to $45.00 /hour
     
    Job Location: Mojave, CA
    Rate: 16-40/hr
    Per Diem: Yes
    Overtime: Possible
    Start Date: ASAP
    Input Date: 12/09/2019
    Last Updated: 01/20/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Tara Gilbert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    Cost Estimator

    Description:

    PDS Tech, Inc. is seeking a Senior Cost Estimator in St. Louis, MO. 

    Job Summary


    This position is to prepare labor and material estimates, evaluate technical requirements and support the engineering group with analysis of product cost and parametric modeling.

    Job Responsibilities 

    • Analyze specifications, statements of work, and other documentation to prepare time, cost, and labor estimates
    • Demonstrated knowledge in BOM part production manufacturing methods, build cycle times, and various 'make-from' material types.
    • Sound reasoning and mathematical skills including an understanding of labor learning curve impact calculations.
    • Collect and review data and develop estimating techniques, including parametric estimating models, for use in preparation of estimates


    • Prepare analysis and verification of product costs in support of special projects from the engineering group
    • Coordinate with internal and external customers to clearly define program criteria to satisfy requests for pricing requirements.


    Please send resumes to Gus Sanchez at: gsanchez@pdstech.com or call 314-264-3135 to discuss. 


    Required Qualifications:
    • Must have an Active DoD Secret Clearance
    • Excellent computer skills (EXCEL, PowerPoint, & Word).
    • Associates degree in Engineering, Technology, Aviation Management - OR - in lieu of degree, 2 years of aerospace manufacturing experience
    • 2 years of experience in estimating techniques or labor time standard development
    • Must be a US Citizen. Must comply with ITAR regulations and site SSA requirements.

    Preferred Qualifications 

    • Experience with electronic modeling software such as NX(UG) and CATIA – to review models for development of fabrication cost estimates
    • Experience with blue print reading, model-based definition, GD&T and related aspects of aerospace design criteria
    • Understanding of contractual agreements (FAR, TINA).
    • Strong analytical and planning skills
    • Excellent computer skills (MS Office Suite).
    • Experience in engineering, manufacturing, fabrication processes and major assembly aerospace/aircraft structures and systems, and airframe manufacturer’s business, policies and practices.
    • Excellent written and verbal communication and collaboration skills

    Please send resumes to Gus Sanchez at: gsanchez@pdstech.com or call 314-264-3135 to discuss
     
    Job Number: 1910105335
    Job Location: Hazelwood, MO
    Per Diem: Yes
    Duration: 6 months
    Input Date: 08/09/2019
    Last Updated: 01/24/2020
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Gus Sanchez
    Address: 11828 W CENTRAL STE 100
    City, State: WICHITA, KS 67212-5129
    Phone: 316/729-1800
    800 Phone: 800/333-8644
    Fax Phone: 316/729-1857
    Email: cecjwichita@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GWPYQA4&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    DCT 3

    Description:
    Lays out, fabricates and assembles a variety of standard and nonstandard major jigs, fixtures, tool masters, master tooling gauges, and related tooling involving compound angels and complex contours where the establishment and coordination to exacting tolerances of numerous tooling holes and reference points between several planes are required. Plans work to be performed and determines methods and sequence of operations working from tool design drawings or own designs. Sets up and operates optical instruments to check overall and detailed alignment, fit, or adjustment of assemblies. Develops and designs holding devices and jig and fixture details. Prepares operational sequences and shop drawings covering parts fabrication and assembly to be performed by others. May monitor and verify quality in accordance with statistical process or other control procedures.
    Qualifications:
     
    Basic Qualifications:
    JIG Builder and Machinist Background
    Candidate must be able to work in and promote a team environment and promote a team paradigm.
    Candidate must be able to work off of high ladders and portable platforms, perform heavy lifting, and capable of standing for long periods of time.
    Candidate must possess good communication skills with the ability to document work performed or explain job delays.
    Strong desire to work efficiently while working safely.
     Candidate will be required to work or support any shift as well as overtime as necessary to support the product.
     High School and 5 years related experience

    Preferred Qualifications:
     
    Tooling experience and Aircraft Structures training are desirable.
    Experienced with Verisurf and LASER trackers are a plus
    Experience with fabrication hand tools is a plus along with some experience with saws, drill, mill and lathe also being a plus.
     
    Job Number: x20190134
    Job Location: Palmdale, CA
    Per Diem: $40/hr
    Duration: 1 year
    Input Date: 10/02/2019
    Last Updated: 12/09/2019
    Firm Name: XPEERANT
    Attention: Woody Arnold
    Address: 4518 SEABOARD LN
    City, State: FORT COLLINS, CO 80525
    Phone: 970/282-9287
    Website: www.xpeerant.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    DCT Tech 4

    Description:
    Position Summary / Responsibilities
    Lays out, fabricates and assembles a variety of standard and nonstandard major jigs, fixtures, tool masters, master tooling gauges, and related tooling involving compound angels and complex contours where the establishment and coordination to exacting tolerances of numerous tooling holes and reference points between several planes are required. Plans work to be performed and determines methods and sequence of operations working from tool design drawings or own designs. Sets up and operates optical instruments to check overall and detailed alignment, fit, or adjustment of assemblies. Develops and designs holding devices and jig and fixture details. Prepares operational sequences and shop drawings covering parts fabrication and assembly to be performed by others. May monitor and verify quality in accordance with statistical process or other control procedures

    Qualifications:
     
    Basic Qualifications:
    High School diploma or equivalent and 7 years of additional education and/or related work experience.
    Jig Builder and Machinist Background
    Must be able to work or support any shift as well as overtime necessary to support our statement of work.  
    Candidate must be able to stand for extended periods of time, candidate must be able to climb ladders and stairs in order to gain access to the work areas
    Preferred Qualifications:
    Tooling experience and Aircraft Structures training are desirable.
    Experienced with Verisurf and Laser Trackers are a plus.
    Experience with fabrication hand tools is a plus with some experience with saws, drill, mill, and lathe also being a plus.
     
    Job Number: x20190133
    Job Location: Palmdale, CA
    Rate: $50/hr
    Duration: 1 year
    Input Date: 12/05/2019
    Last Updated: 12/09/2019
    Firm Name: XPEERANT
    Attention: Woody Arnold
    Address: 4518 SEABOARD LN
    City, State: FORT COLLINS, CO 80525
    Phone: 970/282-9287
    Website: www.xpeerant.com

    Design Engineer ( Clearfield, Utah ) S9271212

    Description:
    Design Engineer ( Clearfield, Utah ) S9271212
    12 month Contract

    Pay Rate:$70-80/hr W2

    Active Secret Clearance Required

    Composite Structural Design Engineer experienced in designing composite structures and assemblies for military and/or commercial aircraft with assembly level design including establishment of data schemes and tolerance analysis.

    Experience is design of laminates, sandwich structures, and bonded and bolted assemblies

    Top three skills:
    Must have an active clearance with an investigation within the last 4.5 years
    BS in Engineering with a minimum of 10 years related experience in design engineering function
    Minimum of 6 years of experience with Siemens NX or Catia V5 for component and assembly design
     
    Job Number: S9271212
    Job Location: Clearfield, UT
    Rate: Open
    Per Diem: no
    Overtime: yes
    Duration: 12 months
    Start Date: ASAP
    Input Date: 01/05/2020
    Last Updated: 01/19/2020
    Firm Name: TALENTPRO CONSULTING
    Attention: Tim
    Address: 402 N B ST
    City, State: FAIRFIELD, IA 52556
    Phone: 641/209-3000 X201
    Fax Phone: 641/209-3001
    Email: timmahaney@talentproconsulting.com
    Website: www.talentproconsulting.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Design and Analysis Engineer

    Description:
    Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

    We are currently searching for the right talent to fill this opportunity:

    Design and Analysis Engineer
    (U.S. Citizenship Required*)
    Oklahoma City, OK
    2019-10166
    Responsibilities:
    • Lead work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects.
    • Lead analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications.
    • Lead testing and validation work on complex system designs to assure that operational and functional requirements are met.
    • Work with other to develop program test strategies.
    • Manage performance of critical suppliers to ensure system integration and compliance with requirements.
    • Conduct program independent reviews and reports results to program leadership.
    • Provide critical support of fielded hardware and software over the entire product lifecycle.
    • Lead research into technology advances for potential application to company business needs.
    • Make recommendations for technology investments.
    • Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.
    • Mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers.
    • Provide engineering and technical decisions for Military Aircraft, Military Derivative Aircraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, B-1B, B-2, B-52 and others) and diverse projects.
    • Assignment will provide an excellent opportunity to learn aircraft power systems on the various platforms.
    • This position provides an excellent opportunity to develop new solutions, help grow and mentor the next generation of engineers, and guide the candidates’ career towards the submittal of a candidacy for a position in the Technical Fellowship.
    • Other job responsibilities may include
    • Lead work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects.
    • Lead analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications.
    • Lead testing and validation work on complex system designs to assure that operational and functional requirements are met.
    • Work with other to develop program test strategies.
    • Manage performance of critical suppliers to ensure system integration and compliance with requirements.
    • Conduct program independent reviews and reports results to program leadership.
    • Provide critical support of fielded hardware and software over the entire product lifecycle.
    • Lead research into technology advances for potential application to company business needs. Makes recommendations for technology investments.
    • Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.
    • Work under consultative mentorship.

    Qualification:
    • This position requires an active (or ability to obtain) U.S. Top Secret Security Clearance.
    • Must possess good organizational, interpersonal, and problem solving skills. Must have demonstrated a strong work ethic and sense of urgency for completing assigned work with a history of meeting commitments. Ability to adjust priorities to multiple demands and unanticipated events.
    • Willingness to travel at least 25% of the time as required
    • Highly motivated and must work well in a team environment.
    • The ability to communicate effectively, both verbally and in writing
    *U.S. Citizenship is required by law, regulation, executive order, or government contract.

    Education and Experience:
    • Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 14 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+9 years' related work experience, Master+12 years' related work experience).
    • ABET accreditation is the preferred, although not required, accreditation standard.

    Conditions of Employment:
    Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

    Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

    Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

    Join a team that values your experience!
     
    Job Number: 2019-10166
    Job Location: Oklahoma City, OK
    Input Date: 11/06/2019
    Firm Name: MOSELEY TECHNICAL SERVICES INC
    Address: 7500 S MEMORIAL PKWY STE 215-R
    City, State: HUNTSVILLE, AL 35802
    Phone: 256/880-0446
    Fax Phone: 256/880-0936
    Website: www.moseleytechnical.com

    Design and Analysis Engineer 3

    Description:
    Chipton-Ross is seeking 3 Design and Analysis Engineer 3's for openings in Hazelwood, MO.

    RESPONSIBILITIES:
    Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

    This Diagnostic Modeler position requires an engineer capable of performing analysis of reliability, maintainability, and system health of aircraft subsystems. Ability to analyze complex electrical and mechanical subsystems is essential. You will evaluate failure mode effects and criticality analysis (FMECA) data from subsystem suppliers to create fault trees and model the fault behavior using MATLAB and Simulink. You will work with the latest generations of aircraft platforms (both commercial and military).

    Candidarte should have a working knowledge of Fault Detection, Fault Isolation, False Alarm Mitigation, and No Fault Found (Can Not Duplicate). You will develop diagnostic models from schematics, FMECAs, and other available supplier documentation. The chosen candidate will translate these models to a Times Failure Propagation Graph (TFPG) model via scripts. The chosen candidate will also translate the information from the diagnostic models to MATLAB\SIMLINK models via scripts. The chosen candidate will work with a real-time software development team to create the Real Time Maintenance Computing (RTMC) application or other fault diagnostic reasoning engines.

    EDUCATION:
    Accredited Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

    TRAVEL: YES - 10%

    FULL TIME/FIRST SHIFT
    WORK HOURS: 8:00 AM - 4:30 PM

    MISCELLANEOUS:
    Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
     
    Job Number: 181215
    Job Location: Hazelwood, MO
    Rate: $DOE
    Duration: 12 Months
    Input Date: 08/22/2019
    Last Updated: 01/24/2020
    Firm Name: CHIPTON ROSS
    Attention: Kevin Suk
    Address: 420 CULVER BLVD
    City, State: PLAYA DEL REY, CA 90293
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: ksuk@chiptonross.com
    Website: www.chiptonross.com

    Design and Analysis Engineer 4

    Description:
    Chipton-Ross is seeking a Design and Analysis Engineer 4 for an opportunity in Oklahoma City, OK.

    RESPONSIBILITIES:
    Leads work with customers to develop and document complex electronic and electrical system requirements. Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications. Leads work to test and validate to ensure system designs meet operational and functional requirements. Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches technology advances for potential application to company business needs. Makes recommendations for technology investments.

    OKC Electrical Power Group is seeking senior electrical power engineers. The candidate will mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for Boeing Military Aircraft, Military Derivative Aircraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, B-1B, B-2, B-52 and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft power systems on the various platforms.

    Other job responsibilities may include

    Leads work with customers to develop and document complex electronic and electrical system requirements.
    Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications.
    Leads work to test and validate to ensure system designs meet operational and functional requirements.
    Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements.
    Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle.
    Researches technology advances for potential application to company business needs.
    Makes recommendations for technology investments.
    Works under minimal mentorship.

    EDUCATION:
    Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

    WORK HOURS:7:30AM-4:00PM
    Full-Time/First Shift

    TRAVEL REQUIRED: Yes

    MISCELLANEOUS:
    Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

     
    Job Number: 182602
    Job Location: OK City, OK
    Rate: $DOE
    Duration: 6 Months
    Input Date: 10/23/2019
    Last Updated: 01/24/2020
    Firm Name: CHIPTON ROSS
    Attention: Lucas Medina
    Address: 420 CULVER BLVD
    City, State: PLAYA DEL REY, CA 90293
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: lmedina@chiptonross.com
    Website: www.chiptonross.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Design and Analysis Engineer 5

    Description:
    Design and Analysis Engineer 5

    Location: Oklahoma City, OK
    Duration: 6 Months

    Description:
    Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects. Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications. Leads testing and validation work on complex system designs to assure that operational and functional requirements are met. Works with other to develop program test strategies. Manages performance of critical suppliers to ensure system integration and compliance with requirements. Conducts program independent reviews and reports results to program leadership. Provides critical support of fielded hardware and software over the entire product lifecycle. Leads research into technology advances for potential application to company business needs. Makes recommendations for technology investments. Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.

    OKC Electrical Power Group is seeking senior electrical power engineers. The candidate will mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for client Military Aircraft, Military Derivative Aircraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, B-1B, B-2, B-52 and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft power systems on the various platforms.

    This position provides an excellent opportunity to develop new solutions, help grow and mentor the next generation of engineers, and guide the candidates’ career towards the submittal of a candidacy for a position in the Technical Fellowship.

    Other job responsibilities may include:
    - Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects.
    - Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications.
    - Leads testing and validation work on complex system designs to assure that operational and functional requirements are met.
    - Works with other to develop program test strategies.
    - Manages performance of critical suppliers to ensure system integration and compliance with requirements.
    - Conducts program independent reviews and reports results to program leadership.
    - Provides critical support of fielded hardware and software over the entire product lifecycle.
    - Leads research into technology advances for potential application to company business needs. Makes recommendations for technology investments.
    - Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.
    - Works under consultative mentorship.

    Basic Qualifications (Required Skills and Experience)
    Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 14 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+9 years' related work experience, Master+12 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

    Must possess good organizational, interpersonal, and problem-solving skills. Must have demonstrated a strong work ethic and sense of urgency for completing assigned work with a history of meeting commitments. Ability to adjust priorities to multiple demands and unanticipated events.

    Highly motivated and must work well in a team environment. The ability to communicate effectively, both verbally and in writing

    Education / Experience:
    Bachelor's degree with 14 or more years' experience, Master's degree with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

    Skill Code: 622-Electrical Systems Design
     
    Job Number: 19-15064
    Job Location: Oklahoma City, OK
    Per Diem: split
    Overtime: possible
    Duration: 6 months
    Start Date: Immediately
    Input Date: 11/06/2019
    Last Updated: 12/04/2019
    Firm Name: ICONMA LLC
    Attention: Constance Whitcomb
    Address: 4620 E 53RD ST
    City, State: DAVENPORT, IA 52807
    Phone: 312/502-4795
    Website: www.iconma.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    ECS or Bleed Air Systems Design Engineer

    Description:
    General Summary:
    The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

    Duties and Responsibilities:
    1. Prepare 3D layout models of the BAS and VCS.
    2. Prepare 3D installation and detail models of the BAS and VCS.
    3. Prepare 2D installation, assembly and detail drawings of the BAS and VCS.
    4. Work in a team environment supporting liaison engineering to research root cause and address production discrepancies.

    Education, Work Experience, Certification and/or Licensure:
    1. Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program with 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.

    Knowledge, Skills and Abilities:
    1. Experience using CATIA V5 to prepare 3D parametric models and 2D drawings. Minimum of 10,000 hours.
    2. Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
    3. Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS.




    The Structures Company is an AA/EOE.
     
    Job Number: 301
    Job Location: NC
    Rate: $55-$60/Hr - **DOE**
    Per Diem: Yes
    Overtime: Yes
    Duration: 10+ Months
    Start Date: ASAP
    Input Date: 10/28/2019
    Last Updated: 01/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    Elect Design and Analy Engr 5

    Description:
    PDS Tech, Inc. is seeking an Electrical Design and Analysis Engineer in Oklahoma City, OK.

    Summary:

    • Assignments may deal with

      • Reviewing supplier and partner qualification data

      • Circuit Analysis/Layout/Design/Manufacturing

      • FPGA design/development/integration

      • Perform Trade Studies/Modeling

      • Cross-functional coordination and integration

      • Develop Design Requirements and Plans

      • Provide Engineering Support to Supplier Management Procurement Activities

      • Perform Engineering Investigations and Troubleshooting Efforts

      • Develop and perform Acceptance Test Procedures

      • Test Automation for aircraft modifications



      Other job responsibilities may include

      • Resolves complex issues on critical programs related to architectural approaches, requirements, specifications and design.

      • Leads technical aspect of proposal preparation.

      • Identifies critical performance measures and develops processes for computing them.

      • Leads activities in support of Supplier Management with make/buy recommendations and other technical services.

      • Coordinates engineering support throughout the lifecycle of the product.

      • Develops new concepts for future product designs to meet projected requirements.

      • Recommends and manages technology insertion.

      • Works under consultative mentorship.

       

    Basic Qualifications (Required Skills and Experience)

    Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 14 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+9 years' related work experience, Master+12 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.
     
    Job Number: 1910108674
    Job Location: OK City, OK
    Duration: 6 months
    Input Date: 11/07/2019
    Last Updated: 01/24/2020
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Marjorie Santiago-Marquez
    Address: 11828 W CENTRAL STE 100
    City, State: WICHITA, KS 67212-5129
    Phone: 316/729-1800
    800 Phone: 800/333-8644
    Fax Phone: 316/729-1857
    Email: cecjwichita@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fTJ2QAM&URLSource=cjhunter

    Electrical Design and Analysis Engineer 3

    Description:
    Chipton-Ross is seeking a Electrical Design and Analysis Engineer 3 for an opportunity in Oklahoma City, OK.

    RESPONSIBILITIES:
    Analyzes customer and system requirements to develop basic architectural approaches and detailed specifications for various electronic products. Develops high-level and detailed designs consistent with requirements and specifications. Validates designs through various methods of review, testing and analysis. Identifies, tracks and statuses technical performance measures to measure progress and ensure compliance with requirements. Supports Supplier Management with make/buy recommendations and other technical services of limited scope. Provides engineering support throughout the lifecycle of the product. Investigates emerging technologies to develop concepts for future product designs to meet projected requirements. Works under general direction.

    OKC Electronic Products Group is seeking experience electrical circuit design engineers. The candidate will mentor and coach lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for Boeing Military Aircraft, Military Derivative Aircraft (B-52, B-1B, B-2, AEW&C, AWACS, and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft circuit design on the various platforms.

    Assignments may deal with

    Reviewing supplier and partner qualification data.
    Circuit Analysis/Layout/Design/Manufacturing.
    FPGA design/development/integration.
    Perform Trade Studies/Modeling.
    Cross-functional coordination and integration.
    Develop Design Requirements and Plans.
    Provide Engineering Support to Supplier Management Procurement Activities.
    Perform Engineering Investigations and Troubleshooting Efforts.
    Develop and perform Acceptance Test Procedures.
    Test Automation for aircraft modifications.

    Other job responsibilities may include

    Analyzes customer and system requirements to develop basic architectural approaches and detailed specifications for various electronic products.
    Develops high-level and detailed designs consistent with requirements and specifications.
    Validates designs through various methods of review, testing and analysis. Identifies, tracks and statuses technical performance measures to measure progress and ensure compliance with requirements.
    Supports Supplier Management with make/buy recommendations and other technical services of limited scope.
    Provides engineering support throughout the lifecycle of the product.
    Investigates emerging technologies to develop concepts for future product designs to meet projected requirements.
    Works under general mentorship.

    EDUCATION:
    Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 5 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD, Master+3 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard

    WORK HOURS: 7:30AM-4:00PM
    Full-Time/First Shift

    TRAVEL REQUIRED: Yes

    MISCELLANEOUS:
    Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

     
    Job Number: 182607
    Job Location: OK City, OK
    Rate: $DOE
    Duration: 6 Months
    Input Date: 10/23/2019
    Last Updated: 01/24/2020
    Firm Name: CHIPTON ROSS
    Attention: Brenda Ordaz
    Address: 420 CULVER BLVD
    City, State: PLAYA DEL REY, CA 90293
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: bordaz@chiptonross.com
    Website: www.chiptonross.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer - A220

    Description:
    Responsible to manage non-conformity/concessions and late changes to support production and to update the master data for the documentation package that accompanies the aircraft. Responds to technical questions, prepares new modifications for country specific constraints and explains about work orders and drawings, especially for aircraft (A/C) mechanical related items. Establishes and maintains effective communications with FAL production. Responsible for on-site training of new manufacturing engineering employees.
    Qualifications/Basic Job Requirements:
    The incumbent should have 5 years of relevant experience, preferably in manufacturing engineering of structure installations in an international aviation company.
    Knowledge of the principles, practices, methods and tools used in manufacturing engineering.
    Knowledge about non conformities/concessions and design query notes.
    Knowledge of supply chain management.
    Knowledge of quality management system.
    Good knowledge of basic written and spoken English.
    Experience working with A220 Aircraft
    Education/Special Qualifications:
    Must have a degree in Industrial Engineering, Mechanical Engineering or Aerospace Engineering or an equivalent combination of education and experience.
    Other desirable skills and experience include:
    Knowledge of Airbus Industries mechanical process & methods.
    Knowledge of Airbus IT-Tools (TiCon, Zamiz, TAKSY, MODA, DocMaster, Adress).
    Knowledge of common applications such as SAP/R3 (Module PP/PM).
    Familiarity with the American aviation market.
    Aircraft Technician experience from A/C manufacturer.
    Knowledge about aircraft structure installation.
    Knowledge of rules for aircraft design and manufacturing.
    Intercultural experience.
    Knowledge of health, safety and environmental regulations and practices.
     
    Job Number: 1240535
    Job Location: Mobile, AL
    Rate: TBD
    Per Diem: yes
    Overtime: possible
    Duration: LT
    Start Date: ASAP
    Input Date: 10/31/2019
    Last Updated: 11/15/2019
    Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
    Attention: Anne Cameron
    Address: P O BOX 965280
    City, State: MARIETTA, GA 30066-0005
    Phone: 770/575-5855
    Fax Phone: 770/575-5856
    Website: www.hi-tecsolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer - no clearance SC

    Description:
    164638/1659-1 Electrical Engineer
    Need Date: A.S.A.P
    Number of Openings 1
    Length of Assignment Estimated one (1) year
    Hourly Pay Rate: $58
    Possible Temp to Hire? No
    Shift, Start & End Time 1st: 0630-1600
    Specific Work Location Greenville, SC



    Job Description:
    Greenville Operations, SC is currently looking to fill an Electrical Engineer position within the Design & Integration skill set to support an Avionics Upgrade (CNS/ATM) project.

    The ideal candidate will be responsible for providing electrical engineering avionics designs in support of CNS/ATM upgrade on a C-130H aircraft. This includes development/design of block diagrams, wiring diagrams, and cable assemblies for avionics system installations. Experience developing ground and flight test procedures and assisting the production team as required during installation and test is also required.

    Minimum Requirements:
    (Education, years of experience, specific skills or tools, etc.)
    • Bachelor's Degree in Electrical Engineering or equivalent design experience with at least 10 years of electrical design.

    • Must be experienced with Engineering design software for electrical design.

    • Ability to understand schematics, generate interconnect diagrams and troubleshoot equipment installations.

    • Experience with aircraft architectures and electrical integration of avionics subsystems.
     
    Job Number: JEG -1659-1
    Job Location: Greenville, SC
    Rate: 58/hr max
    Per Diem: no
    Duration: 12 months
    Input Date: 10/29/2019
    Last Updated: 12/09/2019
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    Electrical Integration Engineer

    Description:
    POSITION SUMMARY:
    The EWIS Engineer, Senior will support in a blended role, drafting wire routings throughout VIP aircraft. Specific knowledge with EWIS standard design and the ability to read electrical drawings while responsible for 3D engineering drawings related to electrical systems and components in support of VIP aircraft completions.

    EXAMPLES OF ESSENTIAL JOB FUNCTIONS:
    1. Provide engineering design and analysis of electrical systems and components.
    2. Prepare electrical system reports, Engineering Authorizations (EAs), drawings, analysis, and test plans.
    3. Develop electrical system modifications and installation work instructions, procedures and recommendations.
    4. Work experience with EWIS standard design and wire separation requirements.
    5. Develop cabin electrical modification/installation work instructions, procedures and recommendations.
    6. Work within engineering team to delegate and assign sections of design elements to appropriate team members.
    7. Provide analysis and reports to substantiate that designs meet applicable criteria outlined in CFRs both foreign and domestic.
    8. Identifies discrepancies and/or problems with drawings before releasing to production and implements corrective action to ensure the timely release.
    9. Provides intermediate level technical support and engineering disposition to resolve aircraft engineering/electrical systems problems.
    10. Using company procedures, applies intermediate level engineering knowledge to resolve moderate to complex issues.
    11. Develops and implements engineering modifications and retrofits to completions in progress.
    12. Maintains intermediate level awareness of both foreign and domestic regulations and required compliance including FARs, ADs, and SBs.
    13. Actively works to improve daily processes, and ensures all work meets completion aircraft requirements.
    14. Performs other duties as assigned.

    MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
    1. Bachelor’s Degree in engineering, with experience directly supporting knowledge of EWIS regulations.
    2. 8 – 10 years experience in Aviation Electrical Systems Engineering or equivalent.

    REQUIRED SKILLS AND ABILITIES:
    1. Proficient with SolidWorks.
    2. Proficient with Microsoft Word, Excel, PowerPoint, Outlook, and Internet Explorer.
    3. Knowledge of MS Databases (SQL or Microsoft Access) preferred.
    4. Aviation background and experience with electrical systems.
    5. Knowledge of Federal Aviation Regulations (CFRs) governing aircraft certification preferred.
    6. Strong knowledge of industry electrical systems and documentation standards.
    7. Experience with electrical systems and components.
    8. Requires working knowledge of applicable regulatory agency requirements and ability to discern how a design may be influenced by them.
    9. Requires reasoning/analytical skills to creatively design and problem solve.
    10. Strong communication and problem-solving skills.
    11. Strong time-management and organizational skills.




    The Structures Company is an AA/EOE.
     
    Job Number: 347
    Job Location: IN
    Rate: $57/Hr. **DOE**
    Per Diem: Yes
    Duration: 12+ Months
    Start Date: ASAP
    Input Date: 12/13/2019
    Last Updated: 01/24/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Email: debbieaubert@thestructurescompany.com
    Website: www.thestructurescompany.com

    Electrical Systems Design Engineer

    Description:
    OKC Electrical Power Group is seeking senior electrical power engineers. The candidate will mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for Military Aircraft, Military Derivative Aircraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, B-1B, B-2, B-52 and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft power systems on the various platforms.

    Other job responsibilities may include
    • Leads work with customers to develop and document complex electronic and electrical system requirements.
    • Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications.
    • Leads work to test and validate to ensure system designs meet operational and functional requirements.
    • Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements.
    • Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle.
    • Researches technology advances for potential application to company business needs.
    • Makes recommendations for technology investments.
    • Works under minimal mentorship.
     
    Job Number: ESDE_OK
    Job Location: Oklahoma City,, OK
    Rate: DOE
    Per Diem: Possible
    Overtime: Possible
    Duration: 6 mon
    Start Date: ASAP
    Input Date: 01/23/2020
    Firm Name: AMERICAN CYBERSYSTEMS
    Attention: Vibhas Sadhu
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Email: vibhas.sadhu@acsicorp.com
    Website: www.acsicorp.com

    Electrical Systems Design Engineer 3

    Description:
    **Requires the ability to obtain Secret Clearance**

    OKC Electrical Power Group is seeking senior electrical power engineers. The candidate will mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for Company Military Aircraft, Military Derivative Aircraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, B-1B, B-2, B-52 and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft power systems on the various platforms.
    Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
     
    Job Number: 374252
    Job Location: OK City, OK
    Rate: TBD
    Duration: 6 - months
    Start Date: ASAP
    Input Date: 11/06/2019
    Last Updated: 01/24/2020
    Firm Name: CTS INTERNATIONAL
    Address: 11100 NE 8TH ST STE 800
    City, State: BELLEVUE, WA 98004
    Phone: 425/451-0051
    Fax Phone: 425/635-7630
    Email: cjhunter@ctsinternational.com
    Website: www.ctsinternational.com

    Electrical Systems Design Engineer 4 - Power Systems

    Description:
    **Requires the ability to obtain Secret Clearance**

    Leads work with customers to develop and document complex electronic and electrical system requirements. Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications. Leads work to test and validate to ensure system designs meet operational and functional requirements. Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches technology advances for potential application to company business needs. Makes recommendations for technology investments.
    OKC Electrical Power Group is seeking senior electrical power engineers. The candidate will mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for Company Military Aircraft, Military Derivative Aircraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, B-1B, B-2, B-52 and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft power systems on the various platforms.

    Other job responsibilities may include

    •Leads work with customers to develop and document complex electronic and electrical system requirements.
    •Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications.
    •Leads work to test and validate to ensure system designs meet operational and functional requirements.
    •Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements.
    •Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle.
    •Researches technology advances for potential application to company business needs.
    •Makes recommendations for technology investments.
    •Works under minimal mentorship.

    Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
     
    Job Number: 374235
    Job Location: OK City, OK
    Rate: TBD
    Duration: 6 - months
    Start Date: ASAP
    Input Date: 10/25/2019
    Last Updated: 01/24/2020
    Firm Name: CTS INTERNATIONAL
    Address: 11100 NE 8TH ST STE 800
    City, State: BELLEVUE, WA 98004
    Phone: 425/451-0051
    Fax Phone: 425/635-7630
    Email: cjhunter@ctsinternational.com
    Website: www.ctsinternational.com

    Electrical Systems Design Engineer 5

    Description:
    **Requires the ability to obtain Secret Clearance**

    Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects. Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications. Leads testing and validation work on complex system designs to assure that operational and functional requirements are met. Works with other to develop program test strategies. Manages performance of critical suppliers to ensure system integration and compliance with requirements. Conducts program independent reviews and reports results to program leadership. Provides critical support of fielded hardware and software over the entire product lifecycle. Leads research into technology advances for potential application to company business needs. Makes recommendations for technology investments. Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.

    OKC Electrical Power Group is seeking senior electrical power engineers. The candidate will mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for Company Military Aircraft, Military Derivative Aircraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, B-1B, B-2, B-52 and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft power systems on the various platforms.

    This position provides an excellent opportunity to develop new solutions, help grow and mentor the next generation of engineers, and guide the candidates’ career towards the submittal of a candidacy for a position in the Technical Fellowship.

    Other job responsibilities may include
    • Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects.
    • Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications.
    • Leads testing and validation work on complex system designs to assure that operational and functional requirements are met.
    • Works with other to develop program test strategies.
    • Manages performance of critical suppliers to ensure system integration and compliance with requirements.
    • Conducts program independent reviews and reports results to program leadership.
    • Provides critical support of fielded hardware and software over the entire product lifecycle.
    • Leads research into technology advances for potential application to company business needs. Makes recommendations for technology investments.
    • Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.
    • Works under consultative mentorship.

    Company is the world's largest aerospace company and leading manufacturer of commercial airplanes and defense, space and security systems. We are engineers and technicians. Skilled scientists and thinkers. Bold innovators and dreamers. Join us, and you can build something better for yourself, for our customers and for the world.

    This position requires an active (or ability to obtain) U.S. Security Clearance, for which the US Government requires US Citizenship
    Bachelor's degree with 14 or more years' experience, Master's degreee with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
     
    Job Number: 374254
    Job Location: OK City, OK
    Rate: TBD
    Duration: 6 - months
    Start Date: ASAP
    Input Date: 11/06/2019
    Last Updated: 01/24/2020
    Firm Name: CTS INTERNATIONAL
    Address: 11100 NE 8TH ST STE 800
    City, State: BELLEVUE, WA 98004
    Phone: 425/451-0051
    Fax Phone: 425/635-7630
    Email: cjhunter@ctsinternational.com
    Website: www.ctsinternational.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Systems Engineer

    Description:
    The Electrical Systems Engineer provides expertise in support of electrical/electronic systems through all phases of a project, including research, preliminary design, detailed design, development, certification, production, and product support.

    Duties and Responsibilities:
    • Design, development and certification support of the aircraft Electrical Power System, including power generation, advanced power distribution, and battery technology.
    • Technology focal for motor / motor controllers
    • Perform trade studies to determine optimal engineering solution
    • Development and validation of requirements
    • Design, plan and support of integration tests for laboratory and aircraft testing
    • Provide technical support for troubleshooting, root cause analysis and corrective action
    • Preparation and presentation of technical data in design reviews
    • Review and approval of Qualification Test Plans, Procedures and Reports

    Education, Work Experience, Certification and/or Licensure:
    • BS in Electrical / Electronic Engineering, Master’s degree preferred
    • 5 or more years of aviation experience involving research, design, development and certification of electrical/electronic systems

    Knowledge, Skills and Abilities:
    • Knowledge of aircraft electrical power systems
    • Knowledge of system modeling and analysis tools
    • Knowledge of motor / motor controller theory and application
    • Knowledge of FAR Part 23 or 25 regulations preferred
    • Knowledge of RTCA/DO-160, RTCA/DO-178 and RTCA/DO-254 processes preferred
     
    Job Number: 28-005
    Job Location: Greensboro, NC
    Rate: $55 - $65/hr
    Per Diem: Yes
    Overtime: Yes
    Duration: 1+ years
    Start Date: ASAP
    Input Date: 10/23/2019
    Last Updated: 11/12/2019
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Systems Engineer

    Description:
    The Senior Engineer Electrical Systems performs a variety of engineering work including design, analysis, substantiation, certification, drawing interpretation and project management related to transport category aircraft. Provides (or may provide) senior level engineering drawings related to electrical systems and components in support of VIP aircraft completions.

    EXAMPLES OF ESSENTIAL JOB FUNCTIONS:
    1. Design and analyze electrical systems and components, typically in support aircraft interior modifications and avionics upgrades (STC projects).
    2. Prepare electrical engineering reports, Engineering Authorization (EAs), drawings, analysis, and test plans.
    3. Develop cabin electrical modification/installation work instruction, procedures and recommendations.
    4. Coordinate and monitor electrical aspects of project schedule with project managers.
    5. Monitor and support electrical kit development and parts suppliers (internal and external).
    6. Support electrical aspects of proposal development. 7. Coordinate with foreign and domestic approval authorities and their representatives for any necessary assistance and/or approvals.
    8. Work within engineering team to delegate and assign work to appropriate team members.
    9. Applies area of specialty to design, develop and implement creative and innovative solutions to difficult problems.
    10. Reviews progress with management and recommends corrective action along with review of alternatives. 11. Performs other duties as assigned.

    MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
    1. Bachelor’s Degree in Electrical/Aerospace Engineering.
    2. 8+ years of experience in Aviation Electrical Engineering.
    3. 4+ years of experience with aircraft electrical systems and wiring diagrams
    4. Familiarity with the Supplemental Type Certificate (STC) process, OEM documentation, and working with DERs

    REQUIRED SKILLS AND ABILITIES:
    1. Proficient with Microsoft Visio.
    2. Proficient with Microsoft Word, Excel, PowerPoint, Outlook, and Internet Explorer.
    3. Knowledge of MS Databases (SQL or Microsoft Access) preferred. 4. Aviation background and electrical/avionics experience.
    5. Knowledge of industry design and documentation standards.
    6. Experience with electrical assemblies and components.
    7. Ability to coach and motivate team of engineers.
    8. Ability to work independently and cross-functionally.
    9. Budget and project management experience.
    10. Experience leading employees/teams in productive and efficient manner.
    11. Requires in-depth knowledge of applicable regulatory agency requirements and discern how a design may be influenced by them. 12. Requires reasoning/analytical skills to creatively design and problem solve.
    13. Strong communication and problem-solving skills.
    14. Strong time-management and organizational skills.


    The Structures Company is an AA/EOE.
     
    Job Number: 343
    Job Location: IN
    Rate: $57/Hr. **DOE**
    Per Diem: Yes
    Duration: 12+ Months
    Start Date: ASAP
    Input Date: 11/11/2019
    Last Updated: 12/13/2019
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electro-Magnetic Effects Engineer (EME)

    Description:
    Perform analysis and design relating to effects of lightning (direct and indirect), surface charging, grounding, structural bonding, circuit isolation, transfer impedance, shielding effectiveness, effects of radiated/conducted emissions and susceptibility, near field/far field electric fields, corona, P-static, etc.
    • Provide aircraft level EME guidance
    • Establish requirements, processes and methodologies (EMC, EMI, HIRF, LSP, G&B, RF, etc)
    • System design and architecture analysis
    • Interact directly with suppliers
    • Define traceability to the FARs
    • Perform and teach electromagnetic compatibility design and analysis
    • Perform computational electromagnetics calculations and assessments
    • Validate and verify of requirements
    • Provide guidance for System test and certification
    • Report Status
    • Provide subject-matter expert level guidance on both practical and theoretical aspects of the EME systems design
    • Provide support for engineering, certification, and flight test departments from concept to product certification
    • Foster a culture that inspires high levels of performance and employee retention
    • Provide EME guidance to the various Sub-systems and Structures IPTs in support of their development and certification
    We're looking for someone who has:
    • Bachelor’s degree in relevant field required.
    • 5+ years of experience within the EME discipline.
    • EME systems design and integration experience
    • Aircraft development experience
    • Experience Developing EME processes, guidelines and methodologies to support the design of the new aircraft
    • Demonstrate a clear understanding of industry guidelines and documents (MIL-STD-285, MIL-STD-461, MIL-STD-464, SAE ARP5412, SAE ARP5414, AC 20-53A, AC 20-107, DO-160, MIL-STD-1541, MIL-STD-1757, etc)
     
    Job Location: Reno, NV
    Rate: DOE
    Per Diem: Possible
    Overtime: Possible
    Duration: Temp to Perm
    Start Date: ASAP
    Input Date: 08/09/2019
    Last Updated: 11/13/2019
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Tara Gilbert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    Electronic Systems Design & Analysis Engineer 3 - 374149

    Description:
    **Must be able to obtain a Secret Clearance**

    Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

    This Diagnostic Modeler position requires an engineer capable of performing analysis of reliability, maintainability, and system health of aircraft subsystems. Ability to analyze complex electrical and mechanical subsystems is essential. You will evaluate failure mode effects and criticality analysis (FMECA) data from subsystem suppliers to create fault trees and model the fault behavior using MATLAB and Simulink. You will work with the latest generations of aircraft platforms (both commercial and military).

    You should have a working knowledge of Fault Detection, Fault Isolation, False Alarm Mitigation, and No Fault Found (Can Not Duplicate). You will develop diagnostic models from schematics, FMECAs, and other available supplier documentation. The chosen candidate will translate these models to a Times Failure Propagation Graph (TFPG) model via scripts. The chosen candidate will also translate the information from the diagnostic models to MATLAB\SIMLINK models via scripts. The chosen candidate will work with a real-time software development team to create the Real Time Maintenance Computing (RTMC) application or other fault diagnostic reasoning engines.
    Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
     
    Job Number: 374149
    Job Location: Hazelwood, MO
    Rate: TBD
    Duration: 12 - months
    Start Date: ASAP
    Input Date: 08/23/2019
    Last Updated: 01/24/2020
    Firm Name: CTS INTERNATIONAL
    Address: 11100 NE 8TH ST STE 800
    City, State: BELLEVUE, WA 98004
    Phone: 425/451-0051
    Fax Phone: 425/635-7630
    Email: cjhunter@ctsinternational.com
    Website: www.ctsinternational.com

    Electrophysics Engineer/Scientist 4

    Description:
    Chipton-Ross is seeking 3 Electrophysics Engineer/Scientist 4's for openings in Oklahoma City, OK.

    RESPONSIBILITIES:
    The candidate will mentor and coach lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for Commercial Airplanes (737, 767, 787 and 777) diverse projects. Main area of focus will be to review supplier and partner qualification data to ensure compliance to client and FAA EME requirements and to provide engineering and technical decisions for client Military Aircraft, Military Derivative Aircraft and Rotorcraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, E-6, AC-130U, B-1B, B-2, B-52, V-22, and others) and diverse projects. Develops and validates requirements for various communication, sensor, electronic warfare and other electromagnetic systems and components. Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures. Develops architectures to integrate systems and components into higher level systems and platforms. Performs trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around established requirements. Defines and conducts tests to validate performance of designs to requirements. Manages appropriate aspects of supplier and partner performance to ensure compliance to requirements. Provides support to products throughout their lifecycle by developing root-cause analysis of anomalies and other engineering support as requested. Supports project management by providing work statement, budget, schedule and other required inputs and by reporting project status. Writes appropriate sections of proposals to support development of new business. Works under general direction. Assignments will provide an excellent opportunity to learn aircraft electromagnetics effect on the various platforms.

    Assignments may deal with
    Reviewing supplier and partner qualification data
    Nuclear Hardening analysis and test
    EMI/C analysis and test
    EMSEC/TEMPEST analysis and test
    HIRF/Lightning analysis and test
    RF Co-Site analysis
    Antenna Coupling analysis
    Electrical Power Quality and Load analysis
    Test Automation for aircraft modifications

    Other job responsibilities may include:
    Develops and validates requirements for various communication, sensor, electronic warfare and other electromagnetic systems and components.
    Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures.
    Develops architectures to integrate systems and components into higher level systems and platforms.
    Performs trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around established requirements.
    Defines and conducts tests to validate performance of designs to requirements.
    Manages appropriate aspects of supplier and partner performance to ensure compliance to requirements.
    Provides support to products throughout their lifecycle by developing root-cause analysis of anomalies and other engineering support as requested.
    Supports project management by providing work statement, budget, schedule and other required inputs and by reporting project status.
    Writes appropriate sections of proposals to support development of new business.
    Works under general direction.

    EDUCATION:
    Accredited Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

    TRAVEL: YES

    FULL TIME/FIRST SHIFT
    WORK HOURS: 7:30 AM - 4:00 PM

    MISCELLANEOUS:
    Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
     
    Job Number: 182605
    Job Location: OK City, OK
    Rate: $DOE
    Duration: 6 Months
    Input Date: 10/23/2019
    Last Updated: 01/24/2020
    Firm Name: CHIPTON ROSS
    Attention: Robert Davis
    Address: 420 CULVER BLVD
    City, State: PLAYA DEL REY, CA 90293
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: rdavis@chiptonross.com
    Website: www.chiptonross.com

    Electrophysics Engineer/Scientist 4 - Electromagnetic Compatibility

    Description:
    **Requires the ability to obtain Secret Clearance**

    Develops and validates requirements for various complex communication, sensor, electronic warfare and other electromagnetic systems and components. Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures. Develops architectures to integrate complex systems and components into higher level systems and platforms. Performs complicated trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around established requirements. Defines and conducts critical tests of various kinds to validate performance of designs to requirements. Manages appropriate aspects of critical supplier and partner performance to ensure compliance to requirements. Provides support to products throughout their lifecycle from manufacturing to customer use by providing guidance and support to resolve complex issues. Supports project management by providing coordinating development of work statement, budget, schedule and other required inputs and conducting appropriate reviews. Generates major sections of proposals to support development of new business. Works under minimal direction.

    Other job responsibilities may include
    •Develops and validates requirements for various complex communication, sensor, electronic warfare and other electromagnetic systems and components.
    •Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures.
    •Develops architectures to integrate complex systems and components into higher level systems and platforms.
    •Performs complicated trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around established requirements.
    •Defines and conducts critical tests of various kinds to validate performance of designs to requirements.
    •Manages appropriate aspects of critical supplier and partner performance to ensure compliance to requirements.
    •Provides support to products throughout their lifecycle from manufacturing to customer use by providing guidance and support to resolve complex issues.
    •Supports project management by providing coordinating development of work statement, budget, schedule and other required inputs and conducting appropriate reviews.
    •Generates major sections of proposals to support development of new business.
    •Works under minimal mentorship.

    OKC Electromagnetic Effects Group is seeking senior electromagnetic effects engineer. The candidate will mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for Commercial Airplanes (737, 767, 787 and 777) diverse projects. Main area of focus will be to review supplier and partner qualification data to ensure compliance to Company and FAA EME requirements and to provide engineering and technical decisions for Company Military Aircraft, Military Derivative Aircraft and Rotorcraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, E-6, AC-130U, B-1B, B-2, B-52, V-22, and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft electromagnetics effect on the various platforms.

    •Reviewing supplier and partner qualification data
    •Nuclear Hardening analysis and test
    •EMI/C analysis and test
    •EMSEC/TEMPEST analysis and test
    •HIRF/Lightning analysis and test
    •RF Co-Site analysis
    •Antenna Coupling analysis
    •Electrical Power Quality and Load analysis
    •Test Automation for aircraft modifications.

    Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
     
    Job Number: 374234
    Job Location: OK City, OK
    Rate: TBD
    Duration: 6 - months
    Start Date: ASAP
    Input Date: 10/25/2019
    Last Updated: 01/24/2020
    Firm Name: CTS INTERNATIONAL
    Address: 11100 NE 8TH ST STE 800
    City, State: BELLEVUE, WA 98004
    Phone: 425/451-0051
    Fax Phone: 425/635-7630
    Email: cjhunter@ctsinternational.com
    Website: www.ctsinternational.com

    Electrophysics Engr/Scien 5

    Description:
    PDS Tech, Inc. is seeking an Electrophysics Engineer/Scientist in Oklahoma City, OK.

    Summary:

    • Reviewing supplier and partner qualification data.
    • Nuclear Hardening analysis and test.
    • EMI/C analysis and test.
    • EMSEC/TEMPEST analysis and test.
    • HIRF/Lightning analysis and test.
    • RF Co-Site analysis.
    • Antenna Coupling analysis.
    • Electrical Power Quality and Load analysis.
    • Test Automation for aircraft modifications.

    Other job responsibilities may include:

    • Develops and validates requirements for unique communication, sensor, electronic warfare and other electromagnetic systems and components.
    • Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures.
    • Develops architectures to integrate multiple systems into higher level systems and platforms.
    • Leads development of trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around complex requirements.
    • Develops new and improved modeling and simulation techniques.
    • Leads development and execution of critical tests to validate performance of designs to requirements.
    • Manages appropriate aspects of critical supplier and partner performance to ensure compliance to requirements.
    • Provides support to products throughout their lifecycle by providing guidance and support to resolve complex issues.
    • Supports project management by providing coordinating development of work statement, budget, schedule and other required inputs and conducting appropriate reviews.
    • Creates new tools to improve management of projects.
    • Leads development of major sections of large-scale proposals to support development of new business.
    • Works under consultative mentorship.

    Prerequisites:
    • Bachelor's 14 or more years' experience, Master's with 12 or more years' experience or PhD with 9 or more years' experience.
    • Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
    • ABET is the preferred, although not required, accreditation standard.
    • This position requires an active (or ability to obtain) U.S. Security Clearance, for which the US Government requires US Citizenship.
    • Must possess good organizational, interpersonal, and problem solving skills.
    • Must have demonstrated a strong work ethic and sense of urgency for completing assigned work with a history of meeting commitments.
    • Ability to adjust priorities to multiple demands and unanticipated events.
    • Highly motivated and must work well in a team environment.
    • The ability to communicate effectively, both verbally and in writing.

    Preferred Qualifications:

    • Active U.S. Security Clearance/TS is a plus.
    • Previous experience in the defense or aerospace industry.
    • Previous experience in Electrical Effects.

     
    Job Number: 1910108675
    Job Location: OK City, OK
    Duration: 6 months
    Input Date: 11/07/2019
    Last Updated: 01/24/2020
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Sherine Ibusuki
    Address: TIME SQUARE 660 BUILDING
    660 SW 39TH ST STE 215

    City, State: RENTON, WA 98057
    Phone: 206/763-2840
    800 Phone: 800/678-8644
    Fax Phone: 206/763-3283
    Email: cecjseattle@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fTJCQA2&URLSource=cjhunter

    Engineer – Aircraft Structural Modification Support

    Description:
    PDS Tech, Inc. is seeking an Aircraft Structural Modification Support Engineer in Lexington, MA. 

    Aircraft Structural Modification Support
    2. Background/Need
    Group 108 works to understand air defense issues, in particular, air vehicle survivability, vulnerability of U.S. Air Force (USAF) aircraft to weapons systems, electronic countermeasures, and air surveillance for homeland defense. The focus is on understanding USAF and threat air defense systems through tests and measurements. Test activities include flight, field, and laboratory testing. We operate three airplanes, all highly instrumented and numerous ground systems as needed for test efforts. We also develop new hardware for testing and prototype systems as well as for instrumenting existing sensors. Group 108 requires for one full time Engineer to support the aircraft structural modification project.
    3. Position Scope/Job Functions
    Candidate will be responsible for the management of a multi-year transformation of a Gulfstream IV-SP into the next Airborne Sensor Test Bed (ASTB). The project entails major airframe modifications including fuselage and wing strengthening, the integration of under wing / centerline instrumentation pods, nose and tail electromagnetic and optical sensors, a sonobuoy or dropsonde release system and major electrical/data infrastructure. Candidate will participate in overseeing vendors performing the necessary aircraft modifications and ensuring that the work is properly executed, documented and delivered on schedule. Support will also include design and conduct of a flight test program to demonstrate compliance with modifications specifications and to obtain FAA approvals for continued operations. Related work will include establishment of a configuration management program and documentation archive to support the aircraft throughout its life.
    4. Skills: Required
    - Direct program management experience of significant aircraft structural modifications
    - Experience with sensor and or mission system integration to turbine powered aircraft
    - Experience in the design and conduct of flight test programs for certification of major modifications
    - Familiarity with design and conduct of aircraft structural demonstration, stability and control, flutter, handling qualities, and performance flight tests
    - Familiarity with the requirements for and development of certification documentation, particularly Flight Manual Supplements
    - Subject Matter Expertise with 14 CFR (FAR) Part 91 repair, overhaul, maintenance and modification requirements, Supplemental Type Certificate (STC) processes, and Experimental Type Certificate approval processes
    - Working knowledge of 14 CFR (FAR) Part 25 certification requirements, particularly in the areas of damage tolerance analysis and instructions for continuing airworthiness
    - Familiarity with Configuration management tools and processes
    - Experience with MS Office tools (Word, PowerPoint, Excel and Project)
    - Ability to produce and present accurate and timely status reports and presentations both written and oral to all levels of management
    - Familiarity with Federal Acquisition Regulations
    5. Skills: Preferred
    - Experience with FAA certification of modifications designed to carry external stores on
    commercial aircraft
    - Experience overseeing the structural modification of GIV, GIV-SP or GV Gulfstream aircraft
    desired
    - Airframe and Powerplant License
    - Designated Engineering Representative (DER) with a Structures and Electrical rating
    - Designated Airworthiness Representative (DAR) rating is desired
    - Demonstrated ability to lead a disparate team of engineers, technicians, and support personnel
    towards a common goal
    6. Education/Professional Certifications
    MS plus three (3) years minimum relevant experience or BS plus five (5) years minimum relevant
    experience
    7. Laboratory-furnished equipment and information
    Office space and a Laboratory desktop computer will be supplied.
    8. Place of Performance
    Work will be performed at the MIT LL Flight Test Facility, Hanscom Air Force Base, Bedford, MA, Bldg
    1715 location. Extensive travel to oversee modification/flight test activities at contractor facilities (US
    and Canada) is required. Anticipate approximately 50% travel to vendor locations.
    9. Period of Performance (PoP)
    Three (3) year period of performance is required.
    10. Security
    All personnel must successfully pass a Commercial Background Investigation (CBI) and hold at least an
    Interim Secret security clearance before receiving facility access.
    Will the performance of work require access to classified information? YES
    What level of clearance is required? SECRET

    Education requirements:
     
    • MS plus three (3) years minimum experience in Aeronautical / Aerospace Engineering with a Structural Focus desired or BS plus five (5) years minimum experience is required.

     
    Required Qualifications:
     
    • Direct program management experience of significant aircraft structural modifications
    • Experience with sensor and or mission system integration to turbine powered aircraft
    • Experience in the design and conduct of flight test programs for certification of major modifications
    • Familiarity with design and conduct of aircraft structural demonstration, stability and control, flutter, handling qualities, and performance flight tests
    • Familiarity with the requirements for and development of certification documentation, particularly Flight Manual Supplements
    • Subject Matter Expertise with 14 CFR (FAR) Part 91 repair, overhaul, maintenance and modification requirements, Supplemental Type Certificate (STC) processes, and Experimental Type Certificate approval processes
    • Working knowledge of 14 CFR (FAR) Part 25 certification requirements, particularly in the areas of damage tolerance analysis and instructions for continuing airworthiness
    • Familiarity with Configuration management tools and processes
    • Experience with MS Office tools (Word, PowerPoint, Excel and Project)
    • Ability to produce and present accurate and timely status reports and presentations both written and oral to all levels of management
    • Familiarity with Federal Acquisition Regulations
    • U.S. Citizenship required
    • Ability to obtain and maintain a security clearance

     
    Desired Qualifications:
     
    • Experience with FAA certification of modifications designed to carry external stores on commercial aircraft
    • Experience overseeing the structural modification of G-IV, G-IVSP or GV Gulfstream aircraft desired

    Airframe and Powerplant License

    • Designated Engineering Representative (DER) with a Structures and Electrical rating
    • Designated Airworthiness Representative (DAR) rating is desired
    • Demonstrated ability to lead a disparate team of engineers, technicians, and support personnel towards a common goal

    Personnel possessing an active SECRET clearance is desired. All personnel must successfully pass a Commercial Background Investigation (CBI). In addition, they may begin with an interim clearance but must obtain and maintain a SECRET clearance.

     
     
    Job Number: 1910104407
    Job Location: Bedford, MA
    Duration: 36 months
    Input Date: 07/17/2019
    Last Updated: 01/24/2020
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Phil Press
    Address: 370 N WESTLAKE BLVD STE 120
    City, State: WESTLAKE VILLAGE, CA 91362
    Phone: 805/418-9862
    800 Phone: 866/458-4322
    Fax Phone: 805/418-9866
    Email: cecjwestlake@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GTYtQAO&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    F-35 Project Management Support CA

    Description:
    165930 Job Title: F-35 Project Mgmt Support

    Work Site Address: 1 Space Park Blvd, Redondo Beach, CA 90278
    Job Number: 1795 (19023764)
    Max Pay Rate: 38.00
    Start Date: 8/19/2019
    End Date: 08/14/2020
    Position Type: Contract



    Job Description:
    Focused support within the F-35 Fleet Modifications (FM) Team to fulfill various project planning, status reporting, and augmented Cost Account Management (CAM) responsibilities. Support the FM Team Manager to accomplish a variety of precise, time-sensitive and high-quality monthly deliverables, metrics and presentations. Responsibilities include; collecting, editing and preparing incremental accomplishment data, reports and metrics; assessing team performance to plan and defining estimate to complete projections; development of team labor charging recommendations; determining earned value variance causes, explanations and corrective recommendations/actions; assist in developing proposal response basis of estimates, to include long term staffing forecasts/implications; and coordinating within the team as a focal point to enable efficient collaboration with other functional organizations. Assist with development of proposal Basis of Estimate (BOE) artifacts and supporting rationale documentation. Must possess excellent interpersonal, written and oral communication skills. Position requires a resourceful, independent self-starter able to analyze and solve CAM derived objectives involving solicitations of and commitments from various stakeholders.


    Qualifications and Education Requirements

    •Solid background and understanding of Project Management fundamentals
    •Bachelor’s degree
    •3 years of relevant experience
    •Proficient in applying Cost Account Management/Earned Value principles
    •Adept in developing products in MS Word, Excel, Project and Power Point
    •Exceptional verbal, written, presentation, and leadership skills
    •Bachelor degree from an accredited college

    Preferred Skills

    •Cost Account Management / Professional Logistics Accreditation(s)
    •MS Access proficiency (creating queries, forms, reports and code/VBA)
    •Six Sigma Certification / Facilitation experience
    •Prior aircraft Maintenance, Repair, Overhaul and Upgrade (MRO&U) program experience
    •Familiarity with the F-35 program/platform a plus

    Location: Redondo Beach
    Schedule: 9/80
    Duration of assignment: Up to 1 year
     
    Job Number: JK-1795ATO
    Job Location: Redondo Beach, CA
    Rate: 38/hr max
    Duration: 1 year
    Input Date: 11/04/2019
    Last Updated: 11/11/2019
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    FEMAP FEA Analyst

    Description:
    Aircraft

    Job location: Montreal, Quebec Canada
     
    Job Location: Canada
    Input Date: 01/14/2015
    Firm Name: ADVANCED TECHNOLOGY
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Email: sclark@advancedtechno.com
    Website: www.advancedtechno.com

    FEMAP FEA Analyst

    Description:
    Aircraft
     
    Job Location: North Dakota
    Input Date: 01/14/2015
    Firm Name: ADVANCED TECHNOLOGY
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Email: sclark@advancedtechno.com
    Website: www.advancedtechno.com

    Final Line Mechanic I

    Description:
    PDS Tech is seeking a Final Line Mechanic I for an open position in Savannah, GA.

    Purpose
    In a team oriented work environment, install parts and components, lines, cables, etc. in area assigned using required tools and appropriate prints, specs, and operational requirements to complete work assigned through final inspection and assure conformance to specifications. 

    Principal Duties and Responsibilities: 



    •  Assemble, install, and adjust aircraft structure parts and system components. Rig control cables, sectors, linkages, control surfaces, landing gear and doors, engines, cowls, aircraft entry doors and associated parts and hardware.
    • Remove and replace linkage, sectors, components, cut and fit system lines and associated hardware necessary to facilitate and perform basic repairs.
    •  Responsible for quality and efficiency of all installations; ensure all parts/assembly meet requirements. Perform necessary rework to ensure installations meet conformity.
    • Install systems lines, valves, ducts and associated parts and hardware. Work to ensure a leak free system.
    • Use a variety of tools and equipment, including permaswage pumps, dies, line cutting tools, wrenches, checking tools, witness gauges, etc. and tools to successfully complete component and perform minor structure installation.
    •  Remove and replace, cut and fit systems lines, panels and structural components and associated hardware necessary t o facilitate and perform basic repairs.
    • Update and sign required logs and records as required.
    •  Check own work to ensure a defect free installation prior to final inspection.
    • Maintain a neat and orderly work area, support the company FOD and 5S programs and comply with all safety regulations.
    • 1 Demonstrate Manufacturing competencies in the employee effectiveness review.
    • Maintain and use all logs and records such as MIR sheets, DMTs, Crabs, PCOs, etc.
    • Support continuous improvement processes as assigned. 



    Additional Functions:
    1. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
    2. Perform other duties as assigned.   




     


     


     

    Education and Experience Requirements:



    • High School graduate/GED.
    • One (1) year aerospace/aviation experience or equivalent mechanical experience such as auto mechanics, heavy equipment, etc.
    • A&P license may offset the one (1) year of experience required.

    Unique Skills:

    Excels working in Team environment



    Other Requirements:



    •  Solumina and Smarteam experience preferred
    • Requires ability to read and interpret basic blueprints and schematic diagrams and use all tools required to do the job. 


     



     


     

     
    Job Number: 1910107120
    Job Location: Savannah, GA
    Per Diem: No
    Duration: 6 months
    Input Date: 10/03/2019
    Last Updated: 01/24/2020
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Clyde Callwood
    Address: 3922 COCONUT PALM DR STE 100
    City, State: TAMPA, FL 33601
    800 Phone: 866/224-2745
    Email: southeastjobs@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fLjSQAU&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Control Engineer

    Description:
    Job Description: This position is for a flight test control engineer at Edwards Air Force Base, CA to provide ground operations support for flight test planning, execution, and verification/validation of performance at the F-16 Combined Test Force (CTF). The applicant will also be expected to provide ground ops support at the F-22 & F35 CTF as needed. The applicant will team with US Air Force, contractor, and civil service engineers as part of an integrated test team for developmental and operational tests. This position will serve as the principal focal point between aircraft maintenance and flight operations engineering personnel. He/she will (1) the coordinate and direct the execution of preflight and post-flight activities to ensure aircraft test readiness, (2) provide configuration control of aircraft software and hardware configurations to ensure that hardware, software, and instrumentation configurations are correct to meet test objectives, (3) coordinate maintenance and logistic support for systems checkouts, flight operations, and anomaly troubleshooting, and (4) coordinate as required with other organizations associated with test readiness.
    This position will act as the principal focal point between maintenance, engineering and flight crew. Relays maintenance related aircraft constraints to the aircraft FTE's. Consult with management on changes or problems. Solve application and technical problems working collaboratively and independently with individuals from diverse technical disciplines and represent the organization frequent inter-organizational and outside customer contacts; Adapt to quickly changing tasks and requirements and learn new skills quickly.
    **Swing shift, overtime, travel and weekend work may be required to support mission & staffing needs.

    **Must be a US Citizen. This position is located at a facility that requires special access.**

    Basic Qualifications
    Broad experience with fighter aircraft flight test methods, aircraft maintenance, avionics maintenance and flight test instrumentation.
    Experience in USAF maintenance activities and procedures, and T-2 modification processes.
    Must have an active/current Secret clearance.

    Desired skills
    *Swing shift, odd shifts, overtime, travel and weekend work may be required as needed.
    - (F-16 experience is highly preferred / F-22 & F35 experience desired) Broad knowledge of fighter aircraft flight test methods, aircraft maintenance, avionics maintenance and flight test instrumentation.
    - Exceptional planning and coordinating skills are required.
    - Ability to interface with all levels of project management is desired. The applicant must have a strong customer focus, reinforced with excellent communication skills and interpersonal skill. Above average oral and written communication skills are desired.
     
    Job Location: Edwards AFB, CA
    Input Date: 11/08/2019
    Firm Name: GLOBAL CONTRACT PROFESSIONALS
    Attention: Recruiter
    Address: P O BOX 161127
    City, State: FORT WORTH, TX 76161-1127
    Phone: 817/847-6673
    800 Phone: 800/942-2376
    Fax Phone: 817/847-9444
    Website: www.teamglobal.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Controls

    Description:
    On any given day you might:
    • Develop air data systems design, architecture and support product plan development, including qualification and certification plans
    • Provide subject matter expert level technical leadership, mentoring and guidance on both practical and theoretical aspects of air data systems
    • Define requirements for the air data systems to ensure compliance with regulations and customer requirements
    • Research new air data concepts and technologies that fit the Aerion technology roadmap
    • Provide validation and verification of air data systems requirements
    We're looking for someone who has:
    • Bachelor’s Degree in relevant engineering area, with a Master’s degree in a technical and/or management specialty preferred
    • 10+ years of deep, hands-on experience in air data and avionics systems development, design and testing in a Military, Commercial, or business aircraft development program
    • 8+ years of demonstrated experience specific to air data systems, air data technical principles and technologies, and managing system suppliers as the technical point of contact
    • In-depth and current knowledge of Part 25 regulatory requirements, including air data specific certification requirements (e.g. RVSM)
    • Experience and expertise in the development of commercial and/or high-end business jets strongly desired, including flight test experience
    • Recent experience in developing air data, avionics and other aircraft systems, such as Automatic Flight Control System (AFCS), from concept through certification strongly desired
    • Optical air data systems experience desired
    • Demonstrated ability to understand & define requirements, generate architecture, and achieve compliance
    We want to build a company around people who are:
    • Highly self-motivated with a strong bias for action
    • Effective at nurturing strong professional relationships
    • Committed to fostering a culture of empowerment & creativity
    We want to build a team around people who are:
    • Highly self-motivated with a strong bias for action
    • Effective at nurturing strong professional relationships
    • Committed to fostering a culture of empowerment & creativity
    Let's Build a Company Together
    We're looking for people from scrappy startups, established corporations, and everything in between. Bring your ideas and experiences, be ready to innovate and learn, and together we'll revolutionize the aerospace industry!
     
    Job Number: 1
    Job Location: Reno, NV
    Per Diem: Split
    Overtime: Possible
    Input Date: 10/15/2019
    Last Updated: 12/09/2019
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Tara Gilbert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Controls Engineer

    Description:
    Our client, a global security and aerospace company, is principally engaged in the research, design, development, manufacture, integration and sustainment of advanced technology systems, products and services. Solving complex challenges and delivering innovative solutions to help customers keep people safe and provide them essential services, our client is hiring for the following critical need:

    Flight Controls Engineer
    (U.S. Citizenship Required*)
    Edwards AFB, CA
    2019-10185
    Responsibilities:
    • Provide ground operations support for flight test planning, execution, and verification/validation of performance at the F-16 Combined Test Force (CTF).
    • Expected to provide ground ops support at the F-22 & F35 CTF as needed.
    • Team with US Air Force, contractor, and civil service engineers as part of an integrated test team for developmental and operational tests.
    • Serve as the principal focal point between aircraft maintenance and flight operations engineering personnel.
    • Coordinate and direct the execution of preflight and post-flight activities to ensure aircraft test readiness.
    • Provide configuration control of aircraft software and hardware configurations to ensure that hardware, software, and instrumentation configurations are correct to meet test objectives.
    • Coordinate maintenance and logistic support for systems checkouts, flight operations, and anomaly troubleshooting.
    • Coordinate as required with other organizations associated with test readiness.
    • Act as the principal focal point between maintenance, engineering and flight crew.
    • Relay maintenance related aircraft constraints to the aircraft FTE's.
    • Consult with management on changes or problems.
    • Solve application and technical problems working collaboratively and independently with individuals from diverse technical disciplines and represent the organization frequent inter-organizational and outside customer contacts.
    • Adapt to quickly changing tasks and requirements and learn new skills quickly.

    Qualification:
    • Must have an active/current Secret Clearance.
    • Swing shift, odd shifts, overtime, travel and weekend work may be required as needed.
    • Broad experience with fighter aircraft flight test methods, aircraft maintenance, avionics maintenance and flight test instrumentation.
    • Experience in USAF maintenance activities and procedures, and T-2 modification processes.
    • (F-16 experience is highly preferred / F-22 & F35 experience desired) Broad knowledge of fighter aircraft flight test methods, aircraft maintenance, avionics maintenance and flight test instrumentation.
    • Exceptional planning and coordinating skills are required.
    • Ability to interface with all levels of project management is desired.
    • Must have a strong customer focus, reinforced with excellent communication skills and interpersonal skill.
    • Above average oral and written communication skills are desired.
    *U.S. Citizenship is required by law, regulation, executive order, or government contract.

    Education and Experience:
    • Bachelor’s Degree combined with 4+ years of experience, or a Master’s Degree with 2+ years of experience.

    Conditions of Employment:
    Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

    Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

    Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

    Join a team that values your experience!
     
    Job Number: 2019-10185
    Job Location: Edwards AFB, CA
    Input Date: 11/08/2019
    Firm Name: MOSELEY TECHNICAL SERVICES INC
    Address: 7500 S MEMORIAL PKWY STE 215-R
    City, State: HUNTSVILLE, AL 35802
    Phone: 256/880-0446
    Fax Phone: 256/880-0936
    Website: www.moseleytechnical.com

    Flight Controls Engineer

    Description:
    Responsibilities
    ·       Evaluate requirements for traceability, correctness, and completeness
    ·       Provide analysis and input as required to verify compliance with ARP4754A and DO178C
    ·       Provide specialized technical assistance to team members as needed
    ·       Initiate and validate improvements to the design and documentation of the Flight Control System
    ·       Maintain schedule and cost objectives
    Minimum Qualifications
    ·       Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry
    ·       7+ years of experience in flight controls of Aircraft in both software and hardware
    ·       Demonstrated communication skills to convince, justify and influence
    ·       Expert understanding of ARP 4754, and DO178C
    ·       DER / UM / DAD / Certification Engineer, active or previous – preferred
     

     
    Job Number: 1910106255
    Job Location: Renton, WA
    Duration: 12 months
    Input Date: 09/12/2019
    Last Updated: 01/24/2020
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Chad Dunavant
    Address: 370 N WESTLAKE BLVD STE 120
    City, State: WESTLAKE VILLAGE, CA 91362
    Phone: 805/418-9862
    800 Phone: 866/458-4322
    Fax Phone: 805/418-9866
    Email: cecjwestlake@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fHHlQAM&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Deck Design Engineer

    Description:
    • Design and develop the new aircraft Flight Deck with input from HMI, interior supplier, Flight Controls IPT and the Avionics IPT
    • Embody the new aircraft Flight Deck concept into the 3D Digital Mock-Up (DMU)
    • Model components and place them in the DMU
    • Add supplier furnished 3D models into the DMU
    • Model the Flight Deck instrument panels
    • Utilize 3D Human Builder programs to simulate crew interactions in the 3d DMU Flight Deck
    • Provide direct input to the Flight Deck design and Avionics engineers
    • Assist in the creation of the new aircraft Flight Deck mock-up
    • Assist in the creation of the new aircraft Flight Deck Simulator
    • Ensure compliance with regulations and customer requirements
    • Interact directly with suppliers
    • Work with strict configuration control requirements
    • Report Status
    • Provide support for engineering, certification, and flight test departments from concept to product certification
    • Foster a culture that inspires high levels of performance and employee retention
    We're looking for someone who has:
    • Bachelor’s degree in relevant field required.
    • 5+ years of experience within the Avionics discipline.
    • Experience working on aircraft development programs
    • Expert level of competency using CATIA V5
    • Working knowledge of PLM tools
    • Knowledge of HMI design and integration
    • Clear understanding of all aspects of Flight Deck development
    • An understanding of Systems Engineering
    • An understanding of anthropometrics, pilot psychology, Pilot workload, HMI and flight deck equipment interactions
    • Familiarity with Part 25 Regulations especially 1302, 1309, 1322, ARP 4754A, ARP 6049494, Mil-STD 1472 and other relevant industry standards is preferred.
    • Experience with Flight Deck mock-up and Simulator design
     
    Job Location: Reno, NV
    Rate: DOE
    Per Diem: Possible
    Overtime: Possible
    Duration: Temp to Perm
    Start Date: ASAP
    Input Date: 08/09/2019
    Last Updated: 11/13/2019
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Tara Gilbert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Deck Design Engineer - Avionics

    Description:
    • Design and develop the new aircraft Flight Deck with input from HMI, interior supplier, Flight Controls IPT and the Avionics IPT
    • Embody the new aircraft Flight Deck concept into the 3D Digital Mock-Up (DMU)
    • Model components and place them in the DMU
    • Add supplier furnished 3D models into the DMU
    • Model the Flight Deck instrument panels
    • Utilize 3D Human Builder programs to simulate crew interactions in the 3d DMU Flight Deck
    • Provide direct input to the Flight Deck design and Avionics engineers
    • Assist in the creation of the new aircraft Flight Deck mock-up
    • Assist in the creation of the new aircraft Flight Deck Simulator
    • Ensure compliance with regulations and customer requirements
    • Interact directly with suppliers
    • Work with strict configuration control requirements
    • Report Status
    • Provide support for engineering, certification, and flight test departments from concept to product certification
    • Foster a culture that inspires high levels of performance and employee retention


    We're looking for someone who has:
    • Bachelor’s degree in relevant field required.
    • 5+ years of experience within the Avionics discipline.
    • Experience working on aircraft development programs
    • Expert level of competency using CATIA V5
    • Working knowledge of PLM tools
    • Knowledge of HMI design and integration
    • Clear understanding of all aspects of Flight Deck development
    • An understanding of Systems Engineering
    • An understanding of anthropometrics, pilot psychology, Pilot workload, HMI and flight deck equipment interactions
    • Familiarity with Part 25 Regulations especially 1302, 1309, 1322, ARP 4754A, ARP 6049494, Mil-STD 1472 and other relevant industry standards is preferred.
    • Experience with Flight Deck mock-up and Simulator design




    The Structures Company is an AA/EOE.
     
    Job Number: 330
    Job Location: Reno, NV
    Rate: ***DOE***
    Per Diem: Yes
    Overtime: Possible
    Duration: 6 Month Contract to Hire
    Start Date: ASAP
    Input Date: 09/18/2019
    Last Updated: 12/09/2019
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Simulator Technician

    Description:
    Flight Simulator Technician to collaborate with a diverse team of technicians, engineers, and training instructors to ensure operational and reliability goals are met on a wide variety of flight simulator equipment used for training by global airlines.

    Qualified Experience / Skills / Training:
    • 2 years of electronics, computer science, PC repair, or network education preferred.
    • Experience repairing electronic systems, aircraft avionics, computers, software programming, and/or networks preferred.
     
    Job Number: 1241204
    Job Location: Miami, FL
    Rate: 18.00
    Per Diem: yes
    Overtime: possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/01/2019
    Last Updated: 11/15/2019
    Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
    Attention: Anne Cameron
    Address: P O BOX 965280
    City, State: MARIETTA, GA 30066-0005
    Phone: 770/575-5855
    Fax Phone: 770/575-5856
    Website: www.hi-tecsolutions.com

    Flight Test Control Engineer

    Description:
    Flight Test Control Engineer

    Edwards Air Force Base, CA
    $85/hr
    15 month W2 contract
    Swing Shift, 9/80
    *MUST HAVE AN ACTIVE DOD SECRET CLEARANCE*

    Description
    This position is for a flight test control engineer at Edwards Air Force Base, CA to provide ground operations support for flight test planning, execution, and verification/validation of performance at the F-16 Combined Test Force (CTF). The applicant will also be expected to provide ground ops support at the F-22 & F35 CTF as needed. The applicant will team with US Air Force, contractor, and civil service engineers as part of an integrated test team for developmental and operational tests. This position will serve as the principal focal point between aircraft maintenance and flight operations engineering personnel. He/she will (1) the coordinate and direct the execution of preflight and post-flight activities to ensure aircraft test readiness, (2) provide configuration control of aircraft software and hardware configurations to ensure that hardware, software, and instrumentation configurations are correct to meet test objectives, (3) coordinate maintenance and logistic support for systems checkouts, flight operations, and anomaly troubleshooting, and (4) coordinate as required with other organizations associated with test readiness.
    This position will act as the principal focal point between maintenance, engineering and flight crew. Relays maintenance related aircraft constraints to the aircraft FTE's. Consult with management on changes or problems. Solve application and technical problems working collaboratively and independently with individuals from diverse technical disciplines and represent the organization frequent inter-organizational and outside customer contacts; Adapt to quickly changing tasks and requirements and learn new skills quickly.
    **Swing shift, overtime, travel and weekend work may be required to support mission & staffing needs.

    **Must be a US Citizen. This position is located at a facility that requires special access.**

    Basic Qualifications
    Broad experience with fighter aircraft flight test methods, aircraft maintenance, avionics maintenance and flight test instrumentation.
    Experience in USAF maintenance activities and procedures, and T-2 modification processes.
    Must have an active/current Secret clearance.

    Desired skills
    *Swing shift, odd shifts, overtime, travel and weekend work may be required as needed.
    - (F-16 experience is highly preferred / F-22 & F35 experience desired) Broad knowledge of fighter aircraft flight test methods, aircraft maintenance, avionics maintenance and flight test instrumentation.
    - Exceptional planning and coordinating skills are required.
    - Ability to interface with all levels of project management is desired. The applicant must have a strong customer focus, reinforced with excellent communication skills and interpersonal skill. Above average oral and written communication skills are desired.
     
    Job Number: 11852
    Job Location: Palmdale, CA
    Rate: 85.00
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 15 months
    Start Date: ASAP
    Input Date: 11/08/2019
    Last Updated: 01/22/2020
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Email: rex@inconen.com
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Design Engineer

    Description:
    The Engineer, Flight Test position is responsible for the design, development, and coordination equipment to support Flight Test operations.

    Duties and Responsibilities:
    1. Designs, develops, coordinates, equipment, and Installations, to support Flight Test operations. Typical equipment and installations including ballast, data booms, cockpit displays, antennas, racks, and various transducers (acceleration, pressure, temperature, displacement, etc.).
    2. Creates engineering drawings and related documents for soundness, efficiency, and simplicity in design; completeness, clarity, and dimensional accuracy; correctness of materials and processes; conformity to design/drafting standards, design specifications, and practicability; and economy of fabrication, assembly, and installation.
    3. Supports fabrication and installation of test equipment.
    4. Resolves issues related to design, documentation, procurement, fabrication, and installation.
    5. Coordinates designs for Instrumentation Installations.
    6. Monitors installation progress for support of upcoming flights.
    7. Coordinates aircraft configuration with the Ground Station which will require operational testing out of the Greensboro facility as well as off-site testing as required.
    8. Designs structural products and components of products to support Flight Test Instrumentation.

    Education, Work Experience, Certification and/or Licensure:
    1. Bachelors’ degree in Aerospace Engineering, Electrical Engineering, Engineering Technology other related field preferred.
    2. 5 years’ experience in aerospace design and testing.

    Knowledge, Skills and Abilities:
    1. Proficiency in 3D multiple component designs and 2D fully dimensional and tolerance drawings. CATIA V5, PLM systems, TeamCenter strongly preferred.
    2. Strong Microsoft Office Suites (Word, Excel, and PowerPoint) strongly preferred.
    3. Strong computer operating systems skills.
    4. Excellent oral and written communication skills.
    5. Excellent interpersonal skills.
    6. Experience with aircraft data acquisition systems.
    7. Experience with FAA regulations.
     
    Job Number: 28-013
    Job Location: Greensboro, NC
    Rate: $50 - $60/hr
    Per Diem: Yes
    Overtime: Yes
    Duration: 1+ years
    Start Date: ASAP
    Input Date: 10/23/2019
    Last Updated: 11/12/2019
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    Flight Test Engineering Manager

    Description:
    PDS Tech, Inc is seeking a Flight Test Engineering Manager for a direct position in Moses Lake, WA.
    As a Flight Test Aircraft Manager, you are the senior program manager responsible to the Director, Flight Test Team for your assigned Flight Test Vehicle’s (FTV’s) work scope, performance, and schedule. To be successful in this role you will use your Flight Test Program Management skills daily.

      Responsibilities:
    • Assign work, goals to your FTV team to maintain flight test schedule
    • Carry out flight test activities, planning, hazard analysis, readiness, and risk/safety reviews
    • Oversee and confirm aircraft configuration for flight tests
    • Perform technical review and processing of specific aircraft test planning documents
    • Ensure flight/ground test readiness while avoiding schedule delays
    • Provide daily and weekly FTV status
    • Resolve issues with functional leads, including engineering, instrumentation, supply chain, maintenance/quality, flight operations, and suppliers

    Minimum Qualifications:
    • Bachelor’s degree required in an engineering discipline (or other technically relevant field), with a Master’s degree, preferred
    • 5+ years of managerial experience in aerospace/aviation
    • Demonstrated ability to coordinate programs across teams, create and manage schedule and budgets.
    • Demonstrated ability to lead cross-functional teams in a complex, dynamic environment with polished presentation skills.
    • Comprehensive knowledge of CFR Part 21 and 23 or 25, knowledge of aircraft design, testing and certification, testing operation duties including flight test, structural testing, and instrumentation
    • Willingness to work extended hours and weekends along with travel associated with aircraft testing deployments

     
    Preferred Qualifications:
    Comprehensive Knowledge of the following:

    • Aircraft performance
    • Stability and Control
    • Aerodynamics
    • Thermodynamics
    • Flutter

     
    Job Number: 1910107850
    Job Location: Moses Lake, WA
    Duration: 12 months
    Input Date: 10/17/2019
    Last Updated: 01/24/2020
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Chad Dunavant
    Address: 370 N WESTLAKE BLVD STE 120
    City, State: WESTLAKE VILLAGE, CA 91362
    Phone: 805/418-9862
    800 Phone: 866/458-4322
    Fax Phone: 805/418-9866
    Email: cecjwestlake@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fOpOQAU&URLSource=cjhunter

    Flight Test Engineering Manager

    Description:
    PDS Tech, Inc is seeking a Flight Test Engineering Manager for a direct position in Moses Lake, WA.
    As a Flight Test Aircraft Manager, you are the senior program manager responsible to the Director, Flight Test Team for your assigned Flight Test Vehicle’s (FTV’s) work scope, performance, and schedule. To be successful in this role you will use your Flight Test Program Management skills daily.

      Responsibilities:
    • Assign work, goals to your FTV team to maintain flight test schedule
    • Carry out flight test activities, planning, hazard analysis, readiness, and risk/safety reviews
    • Oversee and confirm aircraft configuration for flight tests
    • Perform technical review and processing of specific aircraft test planning documents
    • Ensure flight/ground test readiness while avoiding schedule delays
    • Provide daily and weekly FTV status
    • Resolve issues with functional leads, including engineering, instrumentation, supply chain, maintenance/quality, flight operations, and suppliers

    Minimum Qualifications:
    • Bachelor’s degree required in an engineering discipline (or other technically relevant field), with a Master’s degree, preferred
    • 5+ years of managerial experience in aerospace/aviation
    • Demonstrated ability to coordinate programs across teams, create and manage schedule and budgets.
    • Demonstrated ability to lead cross-functional teams in a complex, dynamic environment with polished presentation skills.
    • Comprehensive knowledge of CFR Part 21 and 23 or 25, knowledge of aircraft design, testing and certification, testing operation duties including flight test, structural testing, and instrumentation
    • Willingness to work extended hours and weekends along with travel associated with aircraft testing deployments

     
    Preferred Qualifications:
    Comprehensive Knowledge of the following:

    • Aircraft performance
    • Stability and Control
    • Aerodynamics
    • Thermodynamics
    • Flutter

     
    Job Number: 1910107246
    Job Location: Moses Lake, WA
    Duration: 12 months
    Input Date: 10/03/2019
    Last Updated: 01/24/2020
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Chad Dunavant
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fM8WQAU&URLSource=cjhunter

    Flight Test Instrumentation Engineer

    Description:
    PDS Tech, Inc is seeking a Flight Test Instrumentation Engineer for a direct position in Moses Lake, WA.
    As part of a multicultural team, you will be responsible for the definition and design of the instrumentation system. Working from engineering requirements, develop procedures and drawings with limited guidance, and lead fabrication, installation, and trouble-shooting of instrumentation data acquisition systems and sensors.


    Responsibilities
     
    • Negotiate system requirements with customers and select appropriate sensors and devices.
    • Design mechanical parts and wiring to accommodate sensors and devices
    • Present design in reviews and discussion
    • Create work instruction documents to support part fabrication and installation
    • Set up and operate data acquisition system.
    • Create calibration and functional check procedures.
    • Perform calibrations  and maintain records.
    • Troubleshoot system issues and disposition discrepancies.
    • Work effectively with instrumentation technician and maintenance teams
    • Support test flight briefings.
    • Support live monitoring of aircraft flights via telemetry.
    • Domestic and international travel
    • Work safely in aircraft environment

    Required:
    • Bachelor degree along with a minimum of 1 year of flight test operations experience
      • -Or-
      • A minimum of 5 years of experience in flight test operations in lieu of the degree



    • Excellent demonstrated verbal and written communication skills
    • Ability to defuse and resolve conflict among other team members
    • Ability to quickly learn new software and systems
    • Must be capable and comfortable working within a diverse team environment
    • Strong oral, written, and presentation communication skills

    Desired: 

    • Knowledge in the use of 3D CAD tools (CATIA V5), and ability to create mechanical drawings and electrical diagrams.
    • Experience in design of instrumentation installation of sensors, wiring and equipment
    • Familiarity with tube fabrication (bend, flare, fittings, etc.)
    • Ability to perform strain gage installations
    • Familiarity with electronic test tools such as multi-meters, oscilloscopes, logic analyzers, etc.
    • Knowledge of flight test operations and certification requirements.
    • Working knowledge instrumentation data systems, sensors, and aviation related data busses and communications protocols


     
     
    Job Number: 1910108505
    Job Location: Moses Lake, WA
    Duration: 12 months
    Input Date: 11/05/2019
    Last Updated: 01/24/2020
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Chad Dunavant
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fSIDQA2&URLSource=cjhunter

    Flight Test Instrumentation Engineer

    Description:
    As part of a multicultural team, you will be responsible for the definition and design of the instrumentation system.
    Working from engineering requirements, develop procedures and drawings with limited guidance, and lead fabrication, installation, and trouble-shooting of instrumentation data acquisition systems and sensors.
    Flexibility to make business travels and also possible relocation between Japan and US are expected.

    Responsibilities:
    • Negotiate system requirements with customers and select appropriate sensors and devices.
    • Design mechanical parts and wiring to accommodate sensors and devices
    • Present design in reviews and discussion
    • Create work instruction documents to support part fabrication and installation
    • Set up and operate data acquisition system.
    • Create calibration and functional check procedures.
    • Perform calibrations and maintain records.
    • Troubleshoot system issues and disposition discrepancies.
    • Work effectively with instrumentation technician and maintenance teams
    • Support test flight briefings.
    • Support live monitoring of aircraft flights via telemetry.
    • Domestic and international travel
    • Work safely in aircraft environment

    Bachelor degree along with a minimum of 1 year of flight test operations experience
    -Or-
    A minimum of 5 years experience in flight test operations in lieu of the degree
    Excellent demonstrated verbal and written communication skills
    Ability to defuse and resolve conflict among other team members
    Ability to quickly learn new software and systems
    Must be capable and comfortable working within a diverse team environment
    Strong oral, written, and presentation communication skills

    Desired
    Knowledge in the use of 3D CAD tools (CATIA V5), and ability to create mechanical drawings and electrical diagrams.
    Experience in design of instrumentation installation of sensors, wiring and equipment
    Ability to perform strain gage installations
    Knowledge of flight test operations and certification requirements.
    Working knowledge instrumentation data systems, sensors, and aviation related data busses and communications protocols
    Knowledge on telemetry and data monitoring systems

     
     
    Job Number: 1910107312
    Job Location: Nagoya,
    Duration: 24 months
    Input Date: 09/26/2019
    Last Updated: 01/24/2020
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Chad Dunavant
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fMT0QAM&URLSource=cjhunter

    Flight Test Instrumentation Technician

    Description:
    PDS Tech, Inc is seeking a Flight Test Instrumentation Technician for a direct position in Moses Lake, WA.
    As part of a multicultural team, you will be responsible for manufacturing, assembling, and supporting testing of hardware for flight testing of aircraft. Working from engineering instructions, procedures and drawings with limited guidance, fabricate, install, check-out, calibrate, diagnose, and troubleshoot instrumentation data acquisition systems and sensors. This position will require planning, building and terminating various cable harnesses required in the instrumentation system and significant attention to detail to support safe testing.

     
     Responsibilities
    • Assembly of components to aerospace standards working from blueprints, engineering orders, schematics, repair manuals and other technical documents
    • Termination and installation of wire harnesses and tubing
    • Work with engineers to review design concepts and provide feedback for ease of assembly
    • Review, edit and follow work instructions for installation tasks
    • Plan, communicate and execute installation steps for complex mechanical installations
    • Work safely in aircraft environment

    Required:
    • Associates or 2 year technical degree along with a minimum of 1 year of flight test operations experience

                  -Or-

    • A minimum of 5 years’ experience in flight test operations in lieu of the degree
    • Excellent demonstrated verbal and written communication skills
    • Ability to defuse and resolve conflict among other team members
    • Ability to use standard mechanical tools and fabrication shop equipment
    • Must be capable and comfortable working within a diverse team environment


    Desired:

    • A&P license or equivalent experience
    • Experience operating heavy lifting equipment such as cranes and forklifts
    • Experience with measurement tools
    • Familiarity with tube fabrication (bend, flare, fittings, etc.)
    • Ability to perform strain gage installations
    • Knowledge in the use of 3D CAD tools, and the ability to read mechanical drawings and electrical diagrams.

     
    Job Number: 1910108506
    Job Location: Moses Lake, WA
    Duration: 12 months
    Input Date: 11/04/2019
    Last Updated: 01/24/2020
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Chad Dunavant
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fSIIQA2&URLSource=cjhunter

    Flight Test Instrumentation Technologist

    Description:
    PDS Tech, Inc is seeking a Flight Test Instrumentation Technologist for a direct position in Moses Lake, WA.
    Summary

    As part of a multicultural team, you will be responsible for manufacturing, assembling, and supporting testing of hardware for flight testing of aircraft. Working from engineering instructions, procedures and drawings with limited guidance, fabricate, install, check-out, calibrate, diagnose, and troubleshoot instrumentation data acquisition systems and sensors. This position will require planning, building and terminating various cable harnesses required in the instrumentation system and significant attention to detail to support safe testing.
     
    Responsibilities
    • Assembly of components to aerospace standards working from blueprints, engineering orders, schematics, repair manuals and other technical documents
    • Fabrication of support brackets and sheet metal parts
    • Termination and installation of wire harnesses and tubing
    • Work with engineers to review design concepts and provide feedback for ease of assembly
    • Review, edit and follow work instructions for installation tasks
    • Plan, communicate and execute installation steps for complex mechanical installations
    • Work safely in aircraft environment

    Required:
    • Associates or 2 year technical degree along with a minimum of 1 year of flight test operations experience

                  -Or-

    • A minimum of 5 years’ experience in flight test operations in lieu of the degree
    • Excellent demonstrated verbal and written communication skills
    • Ability to defuse and resolve conflict among other team members
    • Ability to use standard mechanical tools and fabrication shop equipment
    • Must be capable and comfortable working within a diverse team environment


    Desired:

    • A&P license or equivalent experience
    • Experience operating heavy lifting equipment such as cranes and forklifts
    • Experience with measurement tools
    • Familiarity with tube fabrication (bend, flare, fittings, etc.)
    • Ability to perform strain gage installations
    • Knowledge in the use of 3D CAD tools, and the ability to read mechanical drawings and electrical diagrams.

     
    Job Number: 1910108504
    Job Location: Moses Lake, WA
    Duration: 12 months
    Input Date: 10/28/2019
    Last Updated: 01/24/2020
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Chad Dunavant
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fSI8QAM&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Heavy Aircraft Maintenance Program Managers

    Description:
    STS Mod Center is hiring Heavy Aircraft Maintenance Program Managers in Melbourne, Florida.

    Qualifications:
    Heavy aircraft check experience mandatory.
    Must hold a valid Driver License.
    Must not be under a doctor’s care with limited work restrictions.
    Must be able to pass a back ground check and obtain all necessary badging.
    Must be able to ascend/descend ladders, stairs and work stands unassisted.
    Must be able to bend, kneel, crawl and stoop frequently in confined spaces.
    Must be able to lift up to 75 pounds unassisted.
    Must be willing to work in an environment that is subject to changing climate conditions and moderate noise levels.
    Must have excellent communication and people skills.
    Must be able to exercise good judgment in a team environment as well as in aircraft maintenance and safety.
    Must have problem solving and organizational skills. Must be able to read and understand company and manufacturer Manuals.
    Must be able to perform all line maintenance functions un-supervised at any time.
    Must own and provide a minimum set of hand tools
    Benefits:
    STS Mod Center offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

    We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-800-359-4787.

    Thanks for taking the time, and we look forward to hearing from you soon.
     
    Job Number: 49787
    Job Location: Melbourne, FL
    Input Date: 11/04/2019
    Firm Name: STS AEROSTAFF SERVICES
    Attention: STS Technical Services
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 877/707-5767
    Fax Phone: 877/707-5767
    Website: www.stsaviationgroup.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Hydraulic Systems Engineer

    Description:
    • Looking for a Hydraulic Systems Engineer.
    • Someone with experience laying out the entire Hydraulic system in an aircraft.
    • Experience with vendor selection, layout of entire system, requirements management.
    • Must have a degree.
    • Experience at Bombardier, Embraer, or Gulfstream is ideal

    The Structures Company is an AA/EOE.
     
    Job Number: 329
    Job Location: NC
    Rate: $75/Hr. **DOE**
    Per Diem: Yes
    Overtime: Yes
    Duration: 12+ Months
    Start Date: ASAP
    Input Date: 10/09/2019
    Last Updated: 11/13/2019
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Industrial Engineer

    Description:
    PDS is seeking Industrial Engineers for an assignment in Mobile, AL.
    In this position the ideal candidate would be responsible for determining the most effective ways to manufacture an Aircraft. Develops ways to increase productivity, maximize efficiency, and manage human capital more effectively. Requires a Bachelor's Degree in Manufacturing, Engineering or a relevant field.
    Experience in a multi-cultural work environment. Develop most efficient ways to use people, machines, materials and information
    Help production and support functions to increase productivity.
    Optimize methods of business organization.
    Study product requirements and design manufacturing and information systems to meet requirements.
    Develop management control systems.
    Apply statistical methods and perform mathematical calculations to determine manufacturing processes, staff requirements, and production standards.
    Assist in financial planning and cost analysis.
    Design production planning and control systems.
    Design methods to ensure product quality.
    Resolve production problems.
    Evaluate effects of product design changes
    for management review, action, and control.
    Estimate production costs.
    Create sampling procedures and designs.
    Evaluate accuracy of production and testing equipment.
    Study and rearrange org charts, material flow, and operations sequence.
    Coordinate quality control objectives and activities to resolve production problems, maximize product reliability, and minimize cost.
    Communicate with management and user personnel to develop production standards
    Ensure consistency of operations and products in the Single Aisle program.
     
    Job Number: 1910108500
    Job Location: Mobile, AL
    Rate: open
    Per Diem: Split
    Overtime: Possible
    Duration: 6 mos +
    Start Date: asap
    Input Date: 11/01/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Rick Ingle
    Address: 11828 W CENTRAL STE 100
    City, State: WICHITA, KS 67212-5129
    Phone: 316/729-1800
    800 Phone: 800/333-8644
    Fax Phone: 316/729-1857
    Website: www.pdstech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Industrial Engineer - A220

    Description:
    Responsible for determining most effective ways to manufacture an Aircraft. Develops ways to increase productivity, maximize efficiency, and manage human capital more effectively.
    Qualifications/Basic Job Requirements:
    2-5 years of experience in aviation
    Experience working with A220 Aircraft
    Knowledge of basic Production and Quality rules in aviation
    Education/Special Qualifications:
    A Bachelor's Degree in Manufacturing, Engineering or a relevant field.
    Experience in a multi-cultural work environment.
     
    Job Number: 1240524
    Job Location: Mobile, AL
    Rate: TBD
    Per Diem: yes
    Overtime: possible
    Duration: LT
    Start Date: ASAP
    Input Date: 10/31/2019
    Last Updated: 11/15/2019
    Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
    Attention: Anne Cameron
    Address: P O BOX 965280
    City, State: MARIETTA, GA 30066-0005
    Phone: 770/575-5855
    Fax Phone: 770/575-5856
    Website: www.hi-tecsolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Interior Designer

    Description:
    The Interior Design Engineer will perform interior design engineering for cabin & cockpit structures, components, and trim for aircraft. This includes requirements definition for the entire interior including liners, monuments, and seats. Familiarity with FAA certification requirements pertaining to aircraft interiors and human factors is desired. The individual will also support production aircraft completions and supply chain as needed to clarify requirements and provide dispositions to engineering deviations. Most important is the desire to work as a key contributor to the overall engineering organization and provide our customers with the world’s most advance aircraft.

    Duties and Responsibilities:
    • Creates conceptual designs for interiors of the aircraft through 3D modeling software (CATIA), drawings, and/or drafting application.
    • Develops designs for form/fit/function to meet customer and design criteria.
    • Provides designs for the fabrication process including sheet metal, extrusions and inject molding.
    • Familiarity with structural analysis methods, load paths, and material properties.
    • Validates engineering designs per engineering core principles, design standards, processes and industry best practices.
    • Makes recommendations to engineering lead/management.
    • Researches and maintains up to date knowledge of technical data pertaining to cabin, cockpit structures, hardware, material, and finishes.

    Education, Work Experience, Certification and/or Licensure:
    • Bachelors’ degree in an engineering field of study from a four year college or university is required. (In lieu of degree, management may elect to consider individuals with a equivalent years of combined experience and training.)
    • Masters’ degree in Engineering preferred.
    • Minimum of 10 years engineering design experience directly related to mechanical/interior design required.

    Knowledge, Skills and Abilities:
    • Working knowledge of conceptual design development of aircraft interiors.
    • Working knowledge of industry standard (i.e. - parts lists, bill of materials, parts and standards callout, etc).
    • In-depth knowledge of Geometric Dimensioning and Tolerancing (GD&T).
    • Familiarity with 14CFR Part 23/25.
    • Proficiency in CATIA V5 workbenches or equivalent 3D modeling tools (i.e. - Solidworks, Unigraphics, etc).
    • Proficiency in Teamcenter (or equivalent PLM tool).
    • Ability to work independently or within a team environment.
    • Ability to communicate effectively throughout all levels within an organization and present data clearly and concisely.
    • Ability to work cross functionally with Quality and Production to resolve issues on the production line.
     
    Job Number: 28-007
    Job Location: Greensboro, NC
    Rate: $50 - $60/hr
    Per Diem: Yes
    Overtime: Possible
    Duration: 1+ years
    Start Date: ASAP
    Input Date: 10/23/2019
    Last Updated: 11/12/2019
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Lead A&P Mechanics

    Description:
    STS Mod Center is now hiring Lead A&P Mechanics to join its award-winning team in Melbourne, Florida.

    Qualifications:
    Previous three years AP experience.
    Must have one year lead experience.
    Must have valid AP license.
    Knowledge on the CRJ200 and genfams preferred.
    Must hold a valid Driver License.
    Must not be under a doctor’s care with limited work restrictions.
    Must be able to pass a back ground check and obtain all necessary badging.
    Must be able to ascend/descend ladders, stairs and work stands unassisted.
    Must be able to bend, kneel, crawl and stoop frequently in confined spaces.
    Must be able to lift up to 75 pounds unassisted.
    Must be willing to work in an environment that is subject to changing climate conditions and moderate noise levels.
    Must have excellent communication and people skills.
    Must be able to exercise good judgment in a team environment as well as in aircraft maintenance and safety.
    Must have problem solving and organizational skills.
    Must be able to read and understand company and manufacturer Manuals.
    Must be able to perform all line maintenance functions un-supervised at any time
    Must own and provide a minimum set of hand tools.
    Benefits:
    STS Mod Center offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

    We know it takes great people to do great work, so if you’re interested in joining the STS Mod Center family, we encourage you to apply on this page. Have questions? Give us a call at 1-800-359-4787.

    Thanks for taking the time, and we look forward to hearing from you soon.
     
    Job Number: 48780
    Job Location: Melbourne, FL
    Input Date: 11/04/2019
    Firm Name: STS AEROSTAFF SERVICES
    Attention: STS Technical Services
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 877/707-5767
    Fax Phone: 877/707-5767
    Website: www.stsaviationgroup.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Lead Aircraft Sheet Metal Mechanics

    Description:
    STS Mod Center is now hiring Lead Aircraft Sheet Metal Mechanics to join its award-winning team in Melbourne, Florida.

    Qualifications:
    Previous three years leads experience.
    Must have AP license.
    Knowledge on the CRJ200 and genfams preferred.
    Must hold a valid Driver License.
    Must not be under a doctor’s care with limited work restrictions.
    Must be able to pass a back ground check and obtain all necessary badging.
    Must be able to ascend/descend ladders, stairs and work stands unassisted.
    Must be able to bend, kneel, crawl and stoop frequently in confined spaces.
    Must be able to lift up to 75 pounds unassisted.
    Must be willing to work in an environment that is subject to changing climate conditions and moderate noise levels.
    Must have excellent communication and people skills.
    Must be able to exercise good judgment in a team environment as well as in aircraft maintenance and safety.
    Must have problem solving and organizational skills.
    Must be able to read and understand company and manufacturer Manuals.
    Must be able to perform all line maintenance functions un-supervised at any time.
    Must own and provide a minimum set of hand tools.
    Benefits:
    STS Mod Center offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

    We know it takes great people to do great work, so if you’re interested in joining the STS Mod Center family, we encourage you to apply on this page. Have questions? Give us a call at 1-800-359-4787.

    Thanks for taking the time, and we look forward to hearing from you soon.
     
    Job Number: 48714
    Job Location: Melbourne, FL
    Input Date: 11/04/2019
    Firm Name: STS AEROSTAFF SERVICES
    Attention: STS Technical Services
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 877/707-5767
    Fax Phone: 877/707-5767
    Website: www.stsaviationgroup.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Lead Systems Engineer

    Description:
    Lead Systems Engineer

    Location: Grand Rapids, MI (49512)

    12 month contract

    The Lead Systems Engineer will demonstrate development of systems architectures and set technical direction to a small team responsible for development and integration of avionics subsystems onto military aircraft platforms. In this role, you will utilize your experience and expertise to solve problems, develop and execute objectives for self and others, and have the ability to effect short-term and long-term business goals.

    8-10 years of experience seems to be the ideal experience for the team. Familiarity of model-based tools and languages is highly desired.


    Essential Responsibilities:
    • Support the full lifecycle of systems development for avionics products including concept design, system architecture, definition and management of requirements, modeling and simulation, managing suppliers, leading teams, managing cost and schedule, sub-system and aircraft integration, verification, and flight testing
    • Interface with customers, partner companies, suppliers, and other senior leadership within the company
    • Work as part of an Integrated multi-company Avionics and Sub-System development team to define, develop, verify and qualify an open systems solutions for military application
    • Lead and participate in technical reviews of military avionics systems across the business
    • Support and coordinate with interfacing organizations such as subsystem avionics product groups and third-party suppliers
    • Provide technical support for the system safety and certification processes for military avionics systems
    • Lead activities such as; failure Investigations, root causes analysis and implementation of corrective actions, lesson learned, issues and design standards updates
    • Provide Engineering support, within one’s specialty, to teams working on performance, cost reduction and quality initiatives
    • Protect the Intellectual Property rights of the Company
    • Develop and implement training modules as necessary

    Qualifications/Requirements:
    • Bachelor’s Degree in Engineering, Physics, Chemistry, Mathematics, or Computer Science from an accredited college or university
    • Minimum 2 years of technical and/or project leadership experience in Military Avionics Systems or related Product design and development
    • Minimum 2 years of experience in Military Avionics Systems and sub-systems requirements definition, design, architecture, integration, verification, and qualification
    • Military Rotorcraft experience

    Desired Characteristics:
    • Model-based systems engineering experience including DoDAF, UML/SysML
    • Prior experience in defining architectures and requirements for Military Avionics Systems
    • Ability to guide and lead others not in a direct reporting relationship
    • Strong technical and project leadership experience in Military Avionics Systems development
    • Experience in sub-system requirements definition for mission systems, displays / crew interface systems, navigation sensors and radios, datalink, autoflight systems, on-board maintenance systems, and integrated surveillance systems
    • Experience with ARINC 661, ARINC 664 and ARINC 653 development standards
    • Experience with DO-178B, DO-254, DO-297, ARP-4754 certification standards
    • Experience using models to simulate and validate the system design and architecture
    • Familiarity with Systems Engineering processes including requirements definition, aircraft integration, flight testing, system safety, and requirements verification
    • Experience in technical and project leadership for large military aircraft programs
    • Strong oral and written communication skills
    • Strong interpersonal and leadership skills
    • Demonstrated ability to analyze and resolve problems
    • Ability to document, plan, market, and execute programs
    • Demonstrated leadership in advancing the state of the art in a technical specialty





    ____________________________________________________________________

    Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
     
    Job Number: 58219
    Job Location: Grand Rapids, MI
    Rate: DOE
    Per Diem: Possible
    Overtime: Possible
    Duration: 12 months
    Start Date: 11/11/19
    Input Date: 11/01/2019
    Firm Name: BUTLER AEROSPACE & DEFENSE
    Attention: Laura Leszek
    Address: SHELTON POINTE STE 204
    2 TRAP FALLS ROAD

    City, State: SHELTON, CT 06484
    Phone: 203/926-2705
    Fax Phone: 203/926-0082
    Website: www.butler.com