Job Search Results

800 listings were found that matched your search words: Keywords: Aircraft ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2024/03/28 Thursday 10:41AM Pacific Time by ContractJobHunter. )

Listings 1 - 800

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2 Aircraft Stress Engineers - Composites

Description:
Aircraft composite stress engineering contractors needed.
MUST BE US PERSONS.
Ability to work in a fast paced environment.
MUST have a good Composites Primary Airframe Structures background.
FAR 23 experience is a huge plus.
Classical hand analysis, Nastran, FEMAP a plus
US PERSONS REQUIRED

Position Responsibilities
This is a Senior Level Contract Stress Analyst position.
General Minimum Requirements:
• Education: MS with 8+ years, or BS with 1O+ years of relevant experience
• Create engineering criteria and analysis methods to ensure that the work meets all program requirements (e.g., airworthiness, customer requirements, internal methods and processes, etc.).
• Actively develop and evaluate plans for activities and soundness of proposed methods and analysis to meet the program schedules and airworthiness standards.
• Select appropriate material systems for structures applications and identify all material testing requirements.
• Identify and communicate technical risks to the relevant stake holders through program status reports in a timely manner.
• Review all program critical documents such as stress reports, manufacturing plans and procedures, and structural test plans in a timely manner to ensure compliance with design and loads requirements.
• Resolve complex engineering issues in creative and effective ways as to balance technical product, cost, and schedule.

Must be a US Citizen, or Greencard holder.

THE STRUCTURES COMPANY IS AN AA/EOE
 
Job Location: Manassas, VA
Rate: $75-85/hr DOE
Per Diem: Yes
Overtime: Possible
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2 System Design Engineers - hydraulics, Landing Gear or fuel Systems Experience Needed

Description:
Seeking System Design Engineers with 10+ years of experience with detail design of mechanical systems. (hydraulics, landing gear or fuel, etc.) utilizing Catia V5. BS Degree required.

***1 position is located in Manassas, VA and 1 position will be located in Cambridge, MA.***


Duties:
Design aircraft mechanical systems based on customer requirements
Establishes manufacturing tolerances for production of components using GD&T
Design for Manufacturing (DFMA)
Supports review of manufacturing plans and procedures to ensure compliance with design requirements


Requirements:
Bachelor’s degree in Mechanical or Aerospace Engineering from an accredited institution much preferred.
Experience with CATIA V5
Experience in detail design of aircraft mechanical systems, or aircraft composite/metallic structure.
Experience designing hydraulics, landing gear or fuel systems.
DFM experience required
Minimum of 10+ years of experience as a design engineer within the aircraft industry.
Experience with Model Based Definition and GD&T
Experience with Product Lifecycle Management tools (PLM software), Requirements management tools and configuration management
US Citizen required



The Structures Company is an AA/EOE.
 
Job Number: 278
Job Location: VA & MA
Rate: $75-$78/Hr.
Per Diem: Yes
Duration: 9 Months - Possibly longer
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2471 - PROPULSION/PNEUMATIC SYSTEMS - AFTERNOON SHIFT

Description:
Provide Propulsion/Pneumatic Engineering support to the Client Final Line Assembly during afternoon shift.

Witness system functional testing and conduct technical investigations on Propulsion and Pneumatic systems related issues, analyze and develop solutions/recommendations and reports. Disposition RFCs, RNCs, and Supplement 2s as required.

Review functional test requirements and ensure translation into mature functional tests

Track and ensure successful implementation of systems installations and modifications

Work with the product development team to assist with technical proposal activities, including preparation of written material and presentations. Recommend and review design changes

Develop good working relationships with various departments within BA and with all suppliers

Bachelor of Engineering Degree and eligibility for Professional Engineer registration. AME license is an asset

Experience in providing engineering support to a Final Line/ Production

15 years' experience in aircraft Propulsion and/or Pneumatic systems (High and Low Pressure Ducting, Environmental Control System, Avionics Cooling, Oxygen System, Power plant, Fuel systems, etc)

Conversant with design, qualification and certification test requirements of Propulsion and/or Pneumatic systems

Have flexibility to travel.

Familiar with Part 25 certification requirements and advisory material.

Possess strong integration skills, in both system partner management and system technical integration

Familiar with Microsoft Office software tools

Strong communication skills, ability to work well in a multi-disciplinary team environment.

Regular work day, some flexibility required:

Regular Shift = Afternoon Shift (3:30 to 12:00) ;
 
Job Number: 2471
Job Location: Canada
Rate: 62.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2500 - ELECTROMAGNETIC COMPATIBILITY (EMC) ENGINEER - cv, word doc only - On Hold

Description:
Responsible at the aircraft and system level for Electromagnetic Compatibility (EMI)/High Intensity Radiated Fields (HIRF)/Lightning Strike/ Electrostatic Discharge technical requirements.

Knowledge of relevant industry standards (RTCA/DO-160, SAE ARP) and high level of familiarity with airworthiness (TCCA, FAA, EASA) Regulations and Advisory Materials pertaining to EMI, HIRF, Lightning and Electrostatic Discharge.

Execute intermediate to complex engineering assignments related to EMI, HIRF, and Lightning and Electrostatic Discharge requirements.

Analyze new systems designs, assess technical impacts, propose EMC compliance approaches, review/approve technical documents, test plans, test procedures and test reports, and check compliance with certification regulations.

Define scope of work for EMC effort of technical/engineering projects, estimate the time required, plan, highlights technical risks and execute according to priorities.

Define technical requirements, test requirements and perform detailed analysis to ensure aircraft and systems compliance to EMC certification regulations.

Prepare EMI, HIRF, Lightning and Electrostatic Discharge test procedures, execute tests in laboratories and on aircraft and generate results and analysis test reports.

Support and witness EMC tests in Canada, United States and Europe as needed.

Master degree in Electrical or EMC Engineering, or alternatively a Bachelor's degree in Electrical or Physics Engineering with a minimum of eight (5) years of experience in aircraft EMC/HIRF/Lightning/Electrostatic Discharge (FAR 25.981 is an asset).

8 years of experience or more in an aerospace manufacturing company.

Have EMC bench and/or aircraft testing experience.

Have a minimum of five (5) years working experience with systems qualification/certification.

Knowledge of harness design, aircraft design principles including familiarity with aircraft regulatory requirements.

Proficient with the use of PC including Microsoft Office software tools.

Energetic person with strong written and oral communication and interpersonal skills, a high sense of commitment, and a willingness to accept responsibilities while acting independently in a high-pressure partner/supplier team environment.

Must be familiar with DO160, STD ARP, MIL STD, FAA regulations, as well as other applicable airworthiness regulations.

Must be able to analyze modifications at aircraft level and check compliance with certification regulations.

Must be able to support and witness EMC tests in Canada, United States and Europe as needed.
 
Job Number: 2500
Job Location: Montreal, Canada
Rate: 52.00
Per Diem: Paid 3 Months only
Overtime: Paid NOT at 1.5
Duration: 36+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2523 - HYDRO-MECHANICAL SYSTEMS ENGINEER - cv, word doc only - On Hold

Description:
Take part in the integration of the flight control, hydraulic and/or landing gear system for the definition, specification, design, analysis, modification, test and certification of hydro-mechanical systems

Coordinate product development activities between the supplier of the system and the affected work packages

Ensure successful design, validation, certification and delivery of the system

Ensure successful completion of each development phase deliverables (may author, review, approve)

Problem solve the technical issues in a cross functional environment

Be involved in the design and integration of the system

Review the design and documentation of all the aspects related to your system

Check for quality of the Supplier's analyses

Validate and verify system requirements as well as system performance through design reviews, analyses, rig and aircraft testing

Define, prepare and execute qualification and certification tests

Work with supplier in the investigation and resolution of test findings

Bachelor or Master's (preferred) degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of five (5) to seven (7) years

Background in design, integration, development and certification of Hydro-Mechanical Systems

Cognizant of the relevant Airworthiness Regulations and certification process

Good oral and technical writing skills in English (required)

Motivated, self-starter, organized, autonomous and able to work under limited supervision

Team player and able to work with suppliers and customers

Dynamic person with initiative, a strong sense of responsibility and good judgment

Knowledge of MS Office software (essential)

Knowledge of CATIA, Matlab, Simulink (an asset)
 
Job Number: 2523
Job Location: Toronto, Canada
Rate: 57.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2524 - PROPULSION SYSTEMS ENGINEER - cv, word doc only

Description:
Design and integration of the system.

Review of the design and documentation of all the aspects related to your system.

Checking for quality of the Supplier's analyses.

Validation and verification of system requirements.

Validation and verification of system performance through design reviews, analyses, rig and aircraft testing.

Definition, preparation and execution of qualification and certification tests.

Working with supplier in the investigation and resolution of test findings.

Preparation or review of qualification or certification reports.

Working with suppliers to establish complete system requirements and system interfaces.

Liaison with stress, loads, reliability, maintainability and safety (RM&S), simulation, customer and operations support departments.

Identify issues and obstacles, follow-up and communicate progress.

Prepare reports or presentations.

Bachelor or Master's (preferred) degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of five (5) to seven (7) years.

Background in design, integration, development and certification of Propulsion Systems.

Cognizant of the relevant Airworthiness Regulations and certification process.

Good oral and technical writing skills in English and French (required).

Motivated, self-starter, organized, autonomous and able to work under limited supervision.

Team player and able to work with suppliers and customers.

Dynamic person with initiative, a strong sense of responsibility and good judgment.

MS Office software (essential).

Good knowledge of DO-160, FAR/CAR25 Regulations.

Previous experience in providing engineering support to a Final Line/Production would be an asset.
 
Job Number: 2524
Job Location: Toronto, Canada
Rate: 57.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2527 - AVIONICS ISE ENGINEER - 2527 - cv, word doc only

Description:
Lead resolution of technical in service issues for the Client Family of aircraft.

Coordinate technical investigations with other engineering disciplines, suppliers and aircraft operators.

Prepare and issue Electrical and Avionics related product changes, modifications and repairs.

Answer technical queries from the Field Service Representatives and the airline operators.

Be involved in operators' conferences and operator technical reviews.

Analyze and approve new system concept proposals and integrate them in aircraft documentation.

Prepare functional test engineering requirements (FTER), Test definition Sheets (TDS) and avionics systems certification reports.

Coordinate with system suppliers to achieve good integration.

Communicate and coordinate with Transport Canada's design approval designees (DADs).

Investigate avionics system problems identified on aircraft in service or in production. Provide engineering dispositions. Support Continuous Airworthiness (CAW) processes.

Bachelor Degree in Aeronautical Engineering or equivalent.

Must be a team player showing initiative, have a strong sense of responsibility and possess good technical and commercial judgment.

Must have at least 10 years relevant experience with the specification, design, development, integration, test and certification of Avionics systems on aircraft.

Knowledge of certification requirements is required.

Technical experience on the Client family of aircraft is an asset.

Must have strong English (written and spoken) communication skills.

Must be capable of working under pressure, be attentive to details, have good planning skills and be fully committed to accomplishing work on time and on schedule.

Must be computer literate and familiar with commonly used software (MS Office).

Catia V5 experience is an asset.

Must have strong investigative skills.

Are self-starter, enthusiastic, well organized and customer oriented.

Previous experience with Network Security or (FMS) Flight Management System or Autoflight and generic working knowledge of Navigation and communication system is required.

Familiarity with part FAR25 / 525 certification process is an asset.

Experience with civil aircraft and airworthiness authorities is an asset.
 
Job Number: 2527
Job Location: Mirabel, Canada
Rate: 55.00
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 36+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2528 - ELECTRICAL SYSTEMS ENGINEER - cv, word doc only

Description:
Integrate electrical systems on Client family of aircraft (including power generation systems, electrical wiring interconnection systems (EWIS), lighting systems, etc.).

Ensure that all new electrical system concepts meet applicable aircraft system requirements (FAR, RTCA DO160, etc.) and to Client Aerospace requirements and practices.

Prepare requirement documents including technical quotations, system schematics, technical requirement documents (TRD) and statement of work (SOW).

Analyze and approve new system concept proposals and integrate them in aircraft documentation.

Prepare functional test engineering requirements (FTER), Test definition Sheets (TDS) and electrical systems certification reports.

Coordinate with system suppliers to achieve good integration.

Communicate and coordinate with Transport Canada's design approval designees (DADs).

Provide the required electrical expertise and support for the integration of all other aircraft systems (avionics, hydromechanical, pneumatics, propulsion, etc.).

Investigate system problems identified on aircraft in service or in production. Provide engineering dispositions and repair procedures.

Create electrical system schematics and review system

University degree in Engineering or equivalent.

Must be a team player showing initiative, have a strong sense of responsibility and possess good technical and commercial judgment

Must have at least 5 years relevant experience with the specification, design, development, integration, test and certification of Electrical systems on aircraft.

Technical experience on the Client family of aircraft is an asset.

Must have strong English (written and spoken) communication skills.

Must be capable of working under pressure, be attentive to details, have good planning skills and be fully committed to accomplishing work on time and on schedule.

Must have abilities in AutoCAD/AutoSketch.

Must be familiar with part FAR25 / 525 certification process.

Must be computer literate and familiar with commonly used software (MS Office).
 
Job Number: 2528
Job Location: Mirabel, QC, Canada
Rate: 58.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2529 - HYDRO-MECHANICAL SYSTEMS ENGINEER

Description:
Integrate hydromechanical systems on CRJ Family of aircraft (including landing gear, flight control, hydraulic systems, etc.).

Provide the required hydromechanical expertise and support for the integration with other disciplines (including design, RM&S, airworthiness, electrical, avionics,
propulsion, etc.).

Coordinate with system suppliers to achieve good integration.

Investigate system problems identified on aircraft in service or in production.

Provide engineering dispositions and repair procedures.
Support Continuous Airworthiness (CAW) processes.

Analyze and approve new system concept proposals and integrate them in aircraft documentation.

Ensure that all new hydromechanical system concepts meet applicable aircraft system requirements (FAR, RTCA DO160, etc.) and Client Aerospace requirements and practices.

Communicate and coordinate with Transport Canada's design approval designees (DADs).

Prepare requirement documents including technical quotations, system schematics, TRDs and statement of work (SOW).

Prepare and/or review system definition drawings, qualification documentations, functional test engineering requirements (FTER), Test definition Sheets (TDS), design compliance reports, reliability reports and other system certification
reports.

Provide technical support to the production line and to in-service aircraft as required.
University degree in Engineering or equivalent experience, in the mechanical field. A specialization in aeronautical applications is desirable.

Technical experience on the Client family of aircraft is an asset.

Must have strong English (written and spoken) communication skills.

Manage various projects under strict budget and schedule requirements.

Are able to manage conflicts and solve problems.

Are self-starter, enthusiastic, well organized and customer oriented.
 
Job Number: 2529
Job Location: Mirabel, QC, Canada
Rate: 54.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2536 - DESIGN ENGINEER - cv, word doc only

Description:
Participate in design reviews and exchange / communicate your thoughts.

Provide estimate of design related activities.

Support suppliers, production and final line installations.

Bachelor Degree in Mechanical or Aerospace engineering or equivalent with a minimum of five (5) years of relevant experience.

Possesses or cumulate experience in:
Design of aircraft structures with CATIA V5/FiberSim.
Ability to understand complex engineering issues .
General computer skills.

Must be a self-motivated person, a team player able to work under pressure and under a minimum of supervision.

Have an excellent record of meeting your commitments with success.

Bilingual - possess strong communication skills in both French and English.
 
Job Number: 2536
Job Location: Mirabel, QC, Canada
Rate: 51.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2544 - PROPULSION SYSTEM / FUEL ENGINEER - cv, word doc only

Description:
Design and integration of the system.

Review of the design and documentation of all the aspects related to your system.

Checking for quality of the Supplier's analyses.

Validation and verification of system requirements.

Validation and verification of system performance through design reviews, analyses, rig and aircraft testing.

Definition, preparation and execution of qualification and certification tests.

Working with supplier in the investigation and resolution of test findings.

Preparation or review of qualification or certification reports.

Working with suppliers to establish complete system requirements and system interfaces.

Liaison with stress, loads, reliability, maintainability and safety (RM&S), simulation, customer and operations support departments.

Provide support to business units in Propulsion Control requirement definition, verification and validation, following ARP4754.

Identify issues and obstacles, follow-up and communicate progress.

Prepare reports or presentations.

Bachelor or Master's (preferred) degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of ten (10) years.

Possess very good knowledge in Propulsion Control Systems and their integration on the aircraft.

Have a background in design, integration, development and certification of Propulsion Systems.

Are cognizant of the relevant Airworthiness Regulations and certification process.

Have good oral and technical writing skills in English and French (required).

Are motivated, self-starter, organized, autonomous and able to work under limited supervision.

Are a team player and able to work with suppliers and customers.

Are a dynamic person with initiative, a strong sense of responsibility and good judgment.

Have knowledge of MS Office software (essential).
 
Job Number: 2544
Job Location: Montreal, Canada
Rate: 56.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2551 - REPAIR DESIGNER - ISE STRUCTURES - cv, word doc only

Description:
Actively support the Client Aircraft design team to ensure customer expectations are met.

Design generic repairs for metallic and composite structures.

Design specific repairs for damages exceeding Aircraft Structural Repair Publication (ASRP) limitations.

Support operators with technical support on repair-ability of their Client Aircraft fleet.

Perform investigation on in-service structural issues affecting reliability, dispatch-ability and repair-ability.

Participate in the design and support of structural modifications.

Represent Client Customer Support in internal and external committees.

Participate in the continuous improvement initiatives of the Customer Support organization.

Bachelor degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of five (5) years in the aerospace industry.

Detailed knowledge of CATIA V5 (preferably R19) and Enovia.

Are comfortable in interrogating aircraft structure repair.

Knowledge of MS Office software (Word, Excel, PowerPoint, etc).

Dynamic person with initiative, a strong sense of responsibility, customer oriented and good judgment.

Are organized, able to manage your time and prioritize tasks effectively, while working toward tight deadlines.

Bilingual - have strong, written and spoken, communication skills in English and French.

Available for occasional travel on short notice.

Having knowledge of Client Aircraft engineering, drawing and configuration control systems is an asset.

Having detailed knowledge of airline operation, engineering and maintenance is an asset.
 
Job Number: 2551
Job Location: Mirabel, Canada
Rate: 55.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
3 Aircraft Stress Engineers with Composites

Description:
3 Aircraft Composite Stress Engineers Needed.
Require 10+ years of aircraft/aerospace stress analysis with a good composites background.
Previous FEMAP experience is a plus.
Composite airframe analysis experience a MUST.
MUST be US Persons

Qualifications:
-Experience in aircraft or spacecraft composite, design and analysis processes
-Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures
-Minimum 10 years or more of applicable experience in the analysis of structural systems using strength of materials and finite element based methods
-Experience with free-body diagrams and classical stress analysis techniques
-Experience with FEMAP
-Rapid prototyping experience a strong plus
-Excellent computer skills, including Outlook, Word, Excel and PowerPoint
-Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
-Applicants must be U.S. persons as defined by ITAR
Educational Requirements-
Bachelors degree from an accredited institution, with a concentration in a relevant Engineering discipline

The Structures Company is an AA/EOE.
 
Job Location: Mojave, CA
Rate: $80-85/hr DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Last Updated: 01/04/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Materials & Process Engineer

Description:
We are currently seeking M&P Engineer individuals with a focus in evaluation/processing of composites and adhesive secondary bonding of composites. Also must have ground floor experience and creating methods from scratch.

Seeking a first rate aircraft materials and processes engineer with experience in composite materials, testing, out-of-autoclave processing, as well as bonded assemblies. The engineer in this role will be expected to fully understand and maintain the materials and processes used. The primary task of this role will be to design and carry-out mechanical testing to support structural analysis of both current and future vehicle builds. This will require consultation and buy-in from stakeholders in various departments so strong interpersonal skills are also necessary. The engineer in this role is expected to be knowledgeable of basic mechanical testing methods, and familiar with composite and paste adhesive properties. An additional task of this role will be to review/write manufacturing procedures and processes to ensure compliance with design specifications.

Duties:
• Develop and refine material and process requirements
• Author materials and processing specifications
• Author material/joint test plans and their associated reports
• Review test data and undertake post-testing activities including design allowable calculations, equivalency determinations, and failure mode analysis
• Review test plans, process specifications, and other documents to ensure compliance with design requirements
• Confer with stakeholders in Manufacturing, Engineering, and other departments to facilitate production of parts

Requirements:
• Bachelor’s degree from an ABET accredited institution, with a concentration in a relevant Materials Engineering / Mechanical Engineering / Structural Engineering discipline
• Conversant in composite materials and processes used in the manufacture of composite aircraft fuselage and structural components including out-of-autoclave processing and bonded assemblies
• Experience in authoring / revising materials and process specifications for composite materials
• Experience in authoring test plans and reports
• Knowledgable of materials testing and characterization methods
• Familiarity with industry-accepted statistical analysis methods of treating test data such as those found in CMH17-1
• A desire to work in a fast-paced work environment with a motivated team
• Excellent verbal and written communication skills
• Excellent organizational skills and problem-solving skills
• Strong team player
• Excellent computer skills, Microsoft Word, Excel and PowerPoint
• Experience in stress analysis methods, including the use of hand calcs and FEM is a plus


The Structures Company is an AA/EOE.
 
Job Number: 279
Job Location: Mojave, CA
Rate: **DOE**
Per Diem: Yes
Overtime: Possible
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Analysis Engineer

Description:
Seeking a first-rate aerospace Composite Stress Analysis Engineer with experience in vehicle stress analysis, repairs, and production manufacturing. The composite stress analyst will compile analysis, reports, models, and margins of safety into standardized formats for upload into TSC’s product lifecycle manager. Additionally, the analyst will support the design engineering staff with drawing release. The stress analyst is ultimately responsible for ensuring the vehicle structural design meets the customer mission requirements with positive margins of safety.

Your Mission

Responsibilities:
• Reviews, updates, and compiles engineering analytical definition of structural components and assemblies based on records from the prototype build project
• Develops standardized analysis criteria and templates
• Plays an integral role in the work flow release process for all structural designs
• Supports review of manufacturing plans and procedures to ensure compliance with design and loads requirements
• Supports the creation of structural test plans which will be used to verify manufacturing
• Oversees and coordinates other Stress Engineer work and act as a Commodity Stress Focal.
• Handles Pre-and-Post flight structural NRIs for Fuselage Structure, reviews other team members work on NRIs assigned to them.
• Handles Inspection inquiries, requiests, and new inspection from VGMX team.
• Defines primary structures inspections as needed for flight test and EIS.
• Compiling and implementing tools, methods and procedures learned and implement with team.

What You Bring
Basic Qualifications

• Bachelor’s degree from an accredited institution, with a concentration in a relevant Engineering discipline
• Minimum 10 years of applicable experience in the analysis of structural systems using strength of materials and finite element based methods.
• Minimum 5 years experience with strong understanding of composites analysis, manufacturing and sizing of composite structures.
• Minimum 5 years experience with strong understanding of FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures.
• Minimum 3 years supporting Structural Tests with knowledge and practical experience on FEM/Strain gage data correlation.
• Experience with free-body diagrams and classical stress analysis techniques.
• Excellent verbal and written communication skills
• Excellent organizational and problem-solving skills
• Excellent computer skills, including Outlook, Word, Excel and PowerPoint
• Applicants must be “U.S. persons” as defined by the ITAR (22 CFR §120.15)

Preferred Skills and Experience
• Hands-on experience with composites part fabrication and assembly processes.
• Proficiency in FEMAP a plus
• Pilot, aircraft homebuilding and rapid prototyping experience a strong plus
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
• Experience with manufacturing-based ERP systems, such as Oracle, is a plus

Physical and/or Additional Requirements

• None


The Structures Company is an AA/EOE.
 
Job Number: 499
Job Location: Mojave, CA
Rate: $75-$85/Hr. ***DOE***
Per Diem: Yes
Overtime: Yes
Duration: 8+ Months
Start Date: ASAP
Input Date: 09/17/2021
Last Updated: 09/28/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
56190 | Propulsion Integration Design Engineer

Description:
Propulsion Integration Design Engineer

Location: Fort Worth, TX

Contract





Min years of experience: 5



RESPONSIBILITIES



Propulsion Integration Design Engineer



The Propulsion Integration Design Engineer will be directly involved in the integration of propulsion systems for vertical takeoff vehicles. These existing and emerging vehicles provide opportunities for systems engineering, simulation and test of configurations and technologies that will shape the future of aviation. This position will be part of a team of engineers capable of executing in a fast-paced environment. This position will maintain compliance to best practices, customer and regulatory specifications, Bell procedures, program directives, and annual compliance requirements. This position is based at Ft. Worth, TX headquarters facility.



QUALIFICATIONS



Position Responsibilities:

Selection, supplier coordination, integration, flight test and certification of propulsion systems in various VTOL aircraft designs.
Detail design and layout of propulsion systems using industry standards and best practices based on trade studies, research and analysis.
Coordinate with other engineering, manufacturing or specialty personnel to resolve problems.
Position Requirements:

Experience at all levels will be considered with a minimum of 5 years experience specific to the layout, design and certification of propulsion systems in some or all the following areas:
Turbine engine integration or turbine engine inlet and exhaust system development is preferred
Fuel systems
Environmental Control System (ECS)
Bleed Air System
Lubrication Systems
Rain Protection
Fire Detection/Suppression
Experience with AMESIM, GT Suite, ANSYS, or other flow analysis tool is preferred.
Must have the ability to work effectively within a team.
Must have the ability to prioritize a variety of assignments.
Excellent interpersonal and organizational skills are required.
PC proficiency in CATIA V5 or V6, other CAD software, Word, Excel, PowerPoint, and Outlook is preferred.


Education Requirements:

Bachelor’s Degree in Mechanical, Electrical or Aerospace Engineering is required.
Master’s Degree in the Engineering disciplines mentioned above is preferred.


____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 56190
Job Location: Fort Worth, TX
Per Diem: possible
Duration: 12-18
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Taylor McIlrath
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
APG Mechanic URGENT URGENT / no clearance / 3 years’ experience of C-130 Flight Line experience required SC

Description:
164387 Job Title: APG Mechanic

Work Site Address: Greenville, SC 29605
Max Pay Rate: 25-29/hr DOE
Start Date: ASAP
End Date: 9 months
Position Type: Contract
1 more opening
• Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company.

Job Summary:
Inspects, troubleshoots, repairs, overhauls and modifies aircraft systems and powerplants in accordance with established written procedures, specifications, and standards. Candidate must be knowledgeable in aircraft systems operation and maintenance to include landing gear, powerplants, flight controls, disassembly, reassembly, rigging and aircraft movement.

Must be able to read and speak English. Comprehend documents such as safety rules, operating maintenance instructions and procedure manuals.

Mission essential functions and other duties may be assigned as required.

Qualifications and Education Requirements
• Candidate must possess at minimum, 3 years of C-130 Flight Line Experience
• Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company

In order to perform the essential functions of this job, the employee is regularly required to perform repetitive movements, work overhead, use hands to grasp, handle, and/or feel, reach with hands and arms. The employee is frequently required to stand, walk, stoop, kneel, squat, crawl, twist, and work on or in the aircraft. The employee is occasionally required to sit, climb, and balance. The employee must frequently lift and/or push or pull up to 25 pounds and occasionally lift and/or push or pull up to 50 pounds. Specific vision abilities required by this job include close vision, peripheral vision, depth perception and ability to adjust focus. While performing the essential functions of this job, the employee will be required to wear Personal Protective Equipment (PPE) as needed to perform job tasks. The employee is regularly exposed to vibration. The candidate will be frequently exposed to moving mechanical parts, fumes or airborne particles. The candidate must be able to properly use, handle and dispose of hazardous materials, and toxic or caustic chemicals per Government regulations and company procedures. The employee is occasionally exposed to wet and/or humid conditions, high, precarious places, and outside weather conditions. The candidate is required to work in a safe and efficient manner while maintaining a clean, FOD-free work area.

Preferred Skills
FAA Airframe and/or Powerplant License a Plus!
 
Job Number: JEG -1656-1
Job Location: Greenville, SC
Rate: 25-29/hr max
Duration: 9 -18 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerodynamics Engineer

Description:
• Perform detailed aerodynamic analysis in areas of aircraft aerodynamic forces, performance, external loads, and handling qualities
• Predict aircraft performance and handling characteristics using classical analytical techniques as well as advanced simulation tools
• Provide guidance in design modifications to the airframe or airframe elements to improve aerodynamic performance
• Generate aerodynamic performance, stability and control and loads databases
• Assist in the development of advanced aerodynamic analysis tools
• Provide support for engineering, certification, and flight test departments from concept to product certification

Basic Qualifications:
• Zero to five years overall technical experience in computational fluid dynamics of external and/or internal flows.
• BS degree or higher in mechanical/aerospace engineering.
Strong technical, interpersonal, communication, administrative, and presentation skills.

Desired qualifications:
• MS or PhD degree in a technical specialty involving computational fluid dynamics.
• Significant experience with CFD including validation of results. History of working in a collaborative multi-discipline team environment. Experience in the development of fighter, supersonic, and/or business aircraft. Familiarity with HPC platforms and NASA CFD codes such as Overflow and Fun3D.
 
Job Number: 42-015
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: Possible
Duration: 1 year+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
Location: Fort Worth, TX
Rate: $71.14/HR
Duration: 10 month contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****

Job Description:
- Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design.
- Verify the aero source tool will support shop floor, flight line, and off-site aircraft build and operations.
- Will support validation that aero source will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations.
- Will work production floor support from receipt of problem, coordination of answer to release of engineering change.
- Design, develop, and test a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight.
- Establishes structural specifications, performs stress analysis, and conducts performance tests.

Education / Experience:
- Level 4: BS+16 YRS or MS+14 YRS
- Prior F-16 design experience is desired but, not required.
- Past work experience using CATIA V4 and F-16 EBOM system (MPRSII) is highly desired.
- Design experience sought after covers systems installation and equipment installation however, airframe design experience (primary and secondary structure) is also acceptable.
- Past F-22 design experience is desired.
 
Job Number: 10788
Job Location: Fort Worth, TX
Rate: $71.14/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 10 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
Position : Aeronautical Engineer
Location: Fort Worth, TX
Duration: 10 months with possible extension

Job Description:
Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design. Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations. Will support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations. Will work production floor support from receipt of problem, coordination of answer to release of engineering change. Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight. Establishes structural specifications, performs stress analysis, and conducts performance tests.

Prior F-16 design experience is desired but, not required. Past work experience using CATIA V4 and F-16 EBOM system (MPRSII) is highly desired. Design expereience sought after covers systems installation and equipment installation however, airframe design experience (primary and secondary struncture) is also acceptable. Past F-22 design experience is desired.
 
Job Number: 19-05712
Job Location: Fort Worth, TX
Rate: Open
Per Diem: YES
Overtime: YES
Duration: 10 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Rohit
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
Our client is looking for an Aeronautical Engineer to work in Palmdale, CA! Apply today with your most recent resume and if you meet the qualifications a recruiter will be in contact with you!

The ideal candidate for this position will perform the following tasks:
* Will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design.
* Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations.
* Will support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations.
* Will work production floor support from receipt of problem, coordination of answer to release of engineering change.
* Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight.
* Establishes structural specifications, performs stress analysis, and conducts performance tests. '

Mandatory Qualifications and Experience:
* Secret clearance with investigation in the past 5 years is required.
* Catia V5 experience is required.
* Airframe Design experience is required.

Desired Qualifications and Experience:
* Airframe Layout and preliminary design is a plus.
* Experience designing composites is a plus.
* Experience with Siemens Fibersim is a plus.
* Experience with Siemens Teamcenter is a plus.

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 130187
Job Location: Palmdale, CA
Duration: 1 year
Start Date: 04/10/2019
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
Location: Palmdale, CA
Rate: DOE
Duration: 1 year contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

Job Description:
- Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design.
- Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations.
- Will support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations.
- Will work production floor support from receipt of problem, coordination of answer to release of engineering change.
- Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight.
- Establishes structural specifications, performs stress analysis, and conducts performance tests. '


Required Skills:
- Catia V5 experience is required.
- Airframe Design experience is required.
- Airframe Layout and preliminary design is a plus.
- Experience designing composites is a plus.
- Experience with Siemens Fibersim is a plus.
- Experience with Siemens Teamcenter is a plus.


Education:
- Level 4: BS+16 YRS or MS+14 YRS
 
Job Number: 10718
Job Location: Palmdale, CA
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
Location: Palmdale, CA
Rate: DOE
Duration: 1 year contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

Job Description:
- Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design.
- Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations.
- Will support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations.
- Will work production floor support from receipt of problem, coordination of answer to release of engineering change.
- Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight.
- Establishes structural specifications, performs stress analysis, and conducts performance tests. '


Required Skills:
- Catia V5 experience is required.
- Airframe Design experience is required.
- Airframe Layout and preliminary design is a plus.
- Experience designing composites is a plus.
- Experience with Siemens Fibersim is a plus.
- Experience with Siemens Teamcenter is a plus.


Education:
- Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 10716
Job Location: Palmdale, CA
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
Location: Palmdale, CA
Rate: $70.00 - $80.00/HR
Duration: 1 year contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

Job Description:
- Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design.
- Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations.
- Will support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations.
- Will work production floor support from receipt of problem, coordination of answer to release of engineering change.
- Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight.
- Establishes structural specifications, performs stress analysis, and conducts performance tests. '


Required Skills:
- Catia V5 experience is required.
- Airframe experience is required.
- Experience designing composites is a plus.
- Experience with Siemens Fibersim is a plus.

Education:
- Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 9610
Job Location: Palmdale, CA
Rate: $70.00 - $80.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer - Clearance - 10 openings! CA

Description:
1458-1 Aeronautical Engineer
Work Location: Palmdale, CA
Status: Open

Qty: 10
Desired Start Date: 4/10/2019
End Date: 4/10/2020

Job Description:
Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design. Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations. Will support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations. Will work production floor support from receipt of problem, coordination of answer to release of engineering change. Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight. Establishes structural specifications, performs stress analysis, and conducts performance tests.

Catia V5 experience is required.
Airframe Design experience is required.
Airframe Layout and preliminary design is a plus.
Experience designing composites is a plus.
Experience with Siemens Fibersim is a plus.
Experience with Siemens Teamcenter is a plus.

Level: Level 4: BS+16 YRS or MS+14 YRS

Experience
Areas of Expertise CATIA Yes 1 6 + Years
Areas of Expertise Composites and Materials No 2 2 - 4 Years
 
Job Number: JE-1458-1S5
Job Location: Palmdale, CA
Rate: open rate
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer - Clearance - 10 openings! CA

Description:
1459-1S5 Aeronautical Engineer
Work Location: Palmdale, CA
Status: Open

Request: Engineering - Aeronautical Engineer
Qty: 10
Desired Start Date: 4/10/2019
End Date: 4/10/2020

Job Description:
Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design. Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations. Will support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations. Will work production floor support from receipt of problem, coordination of answer to release of engineering change. Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight. Establishes structural specifications, performs stress analysis, and conducts performance tests.

Catia V5 experience is required.
Airframe Design experience is required.
Airframe Layout and preliminary design is a plus.
Experience designing composites is a plus.
Experience with Siemens Fibersim is a plus.
Experience with Siemens Teamcenter is a plus.

Level: Level 3: BS+9-15 YRS or MS+7-13 YRS


Experience
Areas of Expertise CATIA Yes 1 4 - 6 Years
Areas of Expertise Composites and Materials No 2 2 - 4 Years
 
Job Number: JE-1459-1S5
Job Location: Palmdale, CA
Rate: open rate
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer / Catia V5 airframe design composites Fibersim - Clearance URGENT NEED CA

Description:
1090-1 Aeronautical Engineer / Catia V5

Work Location: Palmdale, CA
Status: Open

Qty: 10
12 months

Job Description:
Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design. Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations. Will support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations. Will work production floor support from receipt of problem, coordination of answer to release of engineering change. Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight. Establishes structural specifications, performs stress analysis, and conducts performance tests.

Catia V5 experience is required.
Airframe experience is required.
Experience designing composites is a plus.
Experience with Siemens Fibersim is a plus.

Work Location: Palmdale, CA
Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
Pay Rate: $68.00 Hourly

Experience
Areas of Expertise CATIA Yes 1 4 - 6 Years
Areas of Expertise Composites and Materials No 2 2 - 4 Years
 
Job Number: JE-1090-1S5
Job Location: Palmdale, CA
Rate: 68/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer / Systems Design & Installation Engineer / 3D Catia GD&T - Clearance CA

Description:
1463-1 Aeronautical Engineer
Work Location: Palmdale, CA
Status: Open

Request: Engineering - Aeronautical Engineer
Qty: 2
Desired Start Date: 4/12/2019
End Date: 4/11/2020

Job Description:
This position is for a Systems Design & Installation Engineer. A successful candidate will have a complete understanding of the technical principles, theories and concepts to integrate systems that include some, but not all of the following systems: avionics, fuel, hydraulics, secondary power, landing gear and environmental control for advanced aircraft. The candidate will coordinate efforts across a wide range of functional organizations including Airframe Design, Quality Assurance, Planning, Tooling, Structural Analysis, Materials & Processes, Flight Sciences, Test and Manufacturing.

Responsibilities for this position include:

• Development, test, and validation of new and modified system designs.
• Creation and/or modification of primary and secondary structure with 3-D CATIA models, assemblies and installations.
• Creation and/or modification of system requirements, interface/supplier control drawings, performance specifications, system checkout procedures, statements of work, trade studies, and component/ground/flight test plans.
• Coordination with suppliers, internal and external integrated product teams, management and the customer.
• Technical engineering support for manufacturing, installation and testing at Lockheed Martin and external supplier facilities.
• The candidate may function in a project leadership role where they manage system performance, budget and schedule.

3-D CATIA experience is required.
Geometric Dimensioning and Tolerancing (GD&T) is required.


Level: Level 4: BS+16 YRS or MS+14 YRS


Areas of Expertise CATIA Yes 1 6 + Years
Areas of Expertise Design No 3 6 + Years
Technical Skills Geometric Dimensioning and Tolerancing (GD&T) Yes 2 6 + Years
Technical Skills Stress Analysis No 3 6 + Years
Technical Skills Systems Analysis & Design Skills No 3 6 + Years
 
Job Number: JE-1463-1S5
Job Location: Palmdale, CA
Rate: open rate
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer / Systems Design & Installation Engineer / 3D Catia GD&T - Clearance CA

Description:
1461-1 Aeronautical Engineer

Work Site Address: Palmdale, CA 93599
Max Pay Rate: Open rate
Status: Open

Qty: 5
Desired Start Date: 4/15/2019
End Date: 4/14/2020

Job Description:
This position is for a Systems Design & Installation Engineer. A successful candidate will have a complete understanding of the technical principles, theories and concepts to integrate systems that include some, but not all of the following systems: avionics, fuel, hydraulics, secondary power, landing gear and environmental control for advanced aircraft. The candidate will coordinate efforts across a wide range of functional organizations including Airframe Design, Quality Assurance, Planning, Tooling, Structural Analysis, Materials & Processes, Flight Sciences, Test and Manufacturing.

Responsibilities for this position include:

• Development, test, and validation of new and modified system designs.
• Creation and/or modification of primary and secondary structure with 3-D CATIA models, assemblies and installations.
• Creation and/or modification of system requirements, interface/supplier control drawings, performance specifications, system checkout procedures, statements of work, trade studies, and component/ground/flight test plans.
• Coordination with suppliers, internal and external integrated product teams, management and the customer.
• Technical engineering support for manufacturing, installation and testing at client site and external supplier facilities.


3-D CATIA experience is required.
Geometric Dimensioning and Tolerancing (GD&T) experience is required.


Level: Level 3: BS+9-15 YRS or MS+7-13 YRS

Areas of Expertise CATIA Yes 1 6 + Years
Areas of Expertise Design No 3 6 + Years
Technical Skills Geometric Dimensioning and Tolerancing (GD&T) Yes 2 6 + Years
Technical Skills Stress Analysis No 3 6 + Years
Technical Skills Systems Analysis & Design Skills No 3 6 + Years
 
Job Number: JE-1461-1S5
Job Location: Palmdale, CA
Rate: open rate
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer TX

Description:
1491-1 Aeronautical Engineer
Work Location: Fort Worth, TX
Status: Open

Qty: 1
Desired Start Date: 4/26/2019
End Date: 2/28/2020

Job Description:
Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design. Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations. Will support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations. Will work production floor support from receipt of problem, coordination of answer to release of engineering change. Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight. Establishes structural specifications, performs stress analysis, and conducts performance tests.

Prior F-16 design experience is desired but, not required. Past work experience using CATIA V4 and F-16 EBOM system (MPRSII) is highly desired. Design experience sought after covers systems installation and equipment installation however, airframe design experience (primary and secondary structure) is also acceptable. Past F-22 design experience is desired.

Level: Level 4: BS+16 YRS or MS+14 YRS
Pay Rate: $69.00 Hourly
 
Job Number: JE-1491-1
Job Location: Fort Worth, TX
Rate: 69/hr max
Per Diem: no
Duration: 10 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Design Checker

Description:
The aerospace design checker supports various company projects and programs across the entire life cycle of design and development. Primarily focused on overseeing checking of PMI/Drawings plus management of the aircraft bill of material, including positioning components within the assembly and weight/CG management. This designer position requires close collaboration with the engineering design group supporting preliminary and detail designs of a general aviation electric aircraft.



Specific Responsibilities:

Work under close supervision of the CAD manager.
Support the engineering department checking and reviewing CAD solid models of airframe structural, mechanical, and systems detail designs of parts and assemblies employing metallic and composite materials.
You will check documentation of fabricated drawings, diagrams, Spec and Source Control Drawings, and assemblies to ensure conformance to design documentation, Geometric Dimensioning and Tolerance Standards and design data supplied by engineering.
Verify form and fit completeness and dimensioning consistency of production drawings.
Perform tolerance stack-up analysis to support fit of components to assembly.
Recommend changes to ensure compliance to standards and specifications.
Maintain weight and CG balance sheet for the aircraft.


Minimum Requirements:

Requires Associates Degree in an engineering or design discipline and ten plus years of design or checking experience.
Advanced understanding of Geometric Dimensioning and Tolerancing, ability to perform Tolerance Stack up Analysis.
Proficiency with Siemens NX preferred, but will consider experience with other 3D CAD tools.
 
Job Location: Aurora, CO
Rate: 100k
Per Diem: no
Overtime: no
Duration: perm
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRODUCTIVE DATA SOLUTIONS INC
Attention: Allison McKenzie
Address: 8000 S CHESTER ST SUITE 150
City, State: CENTENNIAL, CO 80112
Phone: 303/220-7165
Fax Phone: 303/220-7425
Website: www.pdsinc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Embedded Software Engineer -Simulations (73)

Description:
*This is a full time, 1 year contract position, located on site in Fort Worth*

We are looking for a contract Real Time Embedded Software Engineer to design, develop, implement, and verify real time aircraft or missile simulation software.

Day to day work may include full dome simulations, high fidelity, man in the loop simulation/mission systems, vehicle testing and integration, and verification/validation.

Required:
*9+ years’ experience developing, integrating and testing simulation software in a high-level language.
*Embedded RTOS development experience
*Experience in Rapid Prototyping, man in the loop simulations, and system verification/validation
*Active Secret Clearance, with an investigation in last 5 years.
*Engineering Degree


Pluses:
*Experience in Programming in C++ and/or Matlab and Fortran
*Good mathematics including curve fitting and regression, linear algebra, algorithms.
*Experience with DOFs and missile applications.
*Familiar with Kalman Filters
 
Job Number: 073
Job Location: Fort Worth, TX
Per Diem: Split
Overtime: yes
Duration: 12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Thomas Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Manager

Description:
Currently looking for an experience Flight Test Team Manager to fill a role with a company in Moses Lake, WA. Interested candidates should have flight test management or engineering management experience.

Responsibilities of the Flight Test Team Manager:
Assign work, goals to the FTV team members.
Ensure test readiness, deliverables are on track.
Ensuring no injuries or accidents.
Ensure short and long term program schedules are accurate (updated by flight operation group and Maintenance).
Update and present short term schedule (90 days) to Functional Leads weekly.
Manage the entire FTV schedule through certification.
Provide daily and weekly FTV status.
Ensure support for short term schedule activities via Functional Leads.
Resolve issues with Functional Leads.
Setting aircraft configuration, schedule, testing and maintenance goals.
Implementing process improvements directly related to their FTV.




Requirements
Strong flight test experience.
Engineering management experience.
Aircraft configuration experience.
 
Job Location: Moses Lake, WA
Per Diem: Possible
Overtime: Yes
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Adnan Salaka
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Structural Designers - UGNX

Description:
Basic Qualifications: Bachelor of Science degree in STEM discipline.
9 years minimum aircraft metallic structural design experience.
CAD Experience using Siemens NX 8.5 or later
*Design of aircraft wing structure

**Email resume to: mmccarthy@pdstech.com

*
 
Job Number: Northrop-UGNX
Job Location: Melbourne, FL
Rate: $55.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 9 Months+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Structural Designers - UGNX - Degree

Description:
**Must have Engineering Degree
Candidates should have design experience with a focus on metallic structure, wing structure design, machined part design, sheet metal and knowledge of GD&T. Familiarity with military and industry standards pertaining to material, processes and hardware.
NX 8.5 or later required with PMI knowledge a must.
Candidate should be familiar with drawing/PDP release process utilizing Teamcenter.
(Siemens) Teamcenter Enterprise / Teamcenter Unified familiarity a plus.

Email resume to: mmccarthy@pdstech.com
 
Job Number: North-FL-UGNX
Job Location: Melbourne, FL
Rate: $55.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 8 Months+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Structural Designers - UGNX - Degree

Description:
**Must have Engineering Degree
Candidates should have design experience with a focus on metallic structure, wing structure design, machined part design, sheet metal and knowledge of GD&T. Familiarity with military and industry standards pertaining to material, processes and hardware.
NX 8.5 or later required with PMI knowledge a must.
Candidate should be familiar with drawing/PDP release process utilizing Teamcenter.
(Siemens) Teamcenter Enterprise / Teamcenter Unified familiarity a plus.

Email resume to: mmccarthy@pdstech.com
 
Job Number: North-FL-UGNX
Job Location: Melbourne, FL
Rate: $55.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 8 Months+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Structural Test Engineer / Stress Analyst

Description:
The candidate will support, perform and manage analysis, research and development of structural engineering specification for ground test and qualification to include structures.

The candidate must have component design, analysis and test experience of dynamic and airframe components. They must also understand the design process, test facilities, test conduct, review / correlation of data and reporting.
 
Job Number: 1910099483
Job Location: Stratford, CT
Per Diem: split
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
Location: Fort Worth, TX
Duration: 6 month contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)


****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****


Job Description:
- Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
- Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.
- This position is for an engineer working in the Fort Worth IFG Aircraft Computers Team.
- Job responsibilities will include supporting development of Avionics Mission Computers on aircraft.
- Must be able to work in a fast paced environment and be able to work independently with limited oversight from team lead and manager.
- Must able to travel both domestic and internationally.


Activities include:
- Electronic hardware testing and troubleshooting
- Support Software Development efforts for target hardware
- Review and improve Hardware Specifications
- Work with Suppliers & Engineering during product development lifecycle
- Support of system integration activities
- Development/review of detailed engineering documents for software and hardware release
- Financial analysis of planned team activities
- Development of estimates to complete, development of customer estimates
- Generation of slide presentations in support of customer briefings
- Support development of Supplier Statement of Work & Proposals
- Work closely with Supply Chain Management


Education:
- Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 10333
Job Location: Fort Worth, TX
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer - Clearance TX

Description:
163995
1334-1 Avionics Engineer
Work Location: Fort Worth, TX
Status: Open

Qty: 1
Desired Start Date: 2/4/2019
End Date: 9/13/2019

Job Description:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

This position is for an engineer working in the Fort Worth IFG Aircraft Computers Team. Job responsibilities will include supporting development of Avionics Mission Computers on aircraft.
Activities include:
• Electronic hardware testing and troubleshooting
• Support Software Development efforts for target hardware
• Review and improve Hardware Specifications
• Work with Suppliers & Engineering during product development lifecycle
• Support of system integration activities
• Development/review of detailed engineering documents for software and hardware release
• Financial analysis of planned team activities
• Development of estimates to complete, development of customer estimates
• Generation of a slide presentations in support of customer briefings
• Support development of Supplier Statement of Work & Proposals
• Work closely with Supply Chain Management
Must be able to work in a fast paced environment and be able to work independently with limited oversight from team lead and manager. Must able to travel both domestic and internationally.

Work Location: Fort Worth, TX
Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
Pay Rate: $62.00 Hourly
 
Job Number: JE-1334-1S
Job Location: Fort Worth, TX
Rate: 62/hr max
Per Diem: no
Duration: 7 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Technician 3 FL

Description:
164305
1738 Avionics Technician 3 (Job Number: 19003512)

Number of Openings: 3

Location(s): United States-Florida-Saint Augustine


Shift: Multiple

Target Start Date: Mar 23, 2019

Target End Date: Dec 20, 2019

Pay rate: $30.00
Location: Saint Augustine

Duration of assignment: Up to 1 year

Clearance: None

M66802 Avionics Technician 3

Position Summary / Responsibilities
Installs and troubleshoots avionics systems wiring in aircraft in accordance with technical specifications, engineering instructions. Fabricates, installs and tests installation, routing, clamping and wiring harnesses. Reads wiring diagrams and blueprints.

Leveling Factors:

Knowledge
Considerable knowledge of the job. Substantial acquaintance with and understanding of general aspects of the job with a broad understanding of the detailed aspects of the job.

Supervision Given and Received
Direct supervision and instructions given for routine work and detailed instructions given for new activities or special assignments. General supervision and instructions given for routine work and detailed instructions given for new activities or special assignments.

Typical Duties and Tasks
Duties & tasks are varied but standardized. Performs some more advanced functions. Resolves routine questions and problems, and refers more complex questions to higher levels.


Basic Qualifications: High school / GED Six years of avionics technician type of experience
Preferred Qualifications: Prior military aircraft avionics background and flight line operations experience preferred
 
Job Number: MB-1738
Job Location: St. Augustine, FL
Rate: 30/hr
Per Diem: no
Duration: 6 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics/Electrical Systems Engineer

Description:
Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Duration: Long Term Contract
Shift: First
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****

Required Skills:
1. Strong technical skills aircraft Avionics/Electrical Systems
2. The ability to effectively work with and support a multi-discipline team of engineers, technicians, Program managers, upper management etc...
3. Strong verbal and written communication skills.
4. Due to the nature of the work candidates must be US Citizen

Education:
1. Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. See Other Requirements in Job Description.
3. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
4. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Preferred Skills:
1. Practical hands on aircraft experience and problem solving supporting a production/service environment during aircraft build and Flight Testing
2. Familiarity with Airworthiness Authority regulations and showing compliance to such regulations
 
Job Number: 10662
Job Location: Savannah, GA
Rate: $58.00 -$63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics/Electronic Systems Engineer

Description:
Job Details
Special Missions - NON FAA - First shift is a 5 day work week, Overtime usually available.

Unique Skills
• Strong technical skills aircraft Avionics/Electrical Systems.
• The ability to effectively work with and support a multi-discipline team of engineers, technicians, Program managers, upper management etc...
• Strong verbal and written communication skills.
• Due to the nature of the work candidates must be US Citizen.
• Practical hands on aircraft experience and problem solving supporting a production/service environment during aircraft build and Flight Testing.
• Familiarity with Airworthiness Authority regulations and showing compliance to such regulations.

Requirements
• Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
 
Job Number: 24-341
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Bleed Air Designer

Description:
The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
1. Prepare 3D layout models of the BAS and VCS.
2. Prepare 3D installation and detail models of the BAS and VCS.
3. Prepare 2D installation, assembly and detail drawings of the BAS and VCS.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program
2. Minimum 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.

Knowledge, Skills and Abilities:
1. Experience using CATIA V5 to prepare 3D parametric models and 2D drawings. Minimum of 10,000 hours.
2. Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
3. Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS.
 
Job Number: 28-037
Job Location: Greensboro, NC
Rate: Up to $75/hr, DOE
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ECS or Bleed Air Systems Design Engineer

Description:
General Summary:
The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
1. Prepare 3D layout models of the BAS and VCS.
2. Prepare 3D installation and detail models of the BAS and VCS.
3. Prepare 2D installation, assembly and detail drawings of the BAS and VCS.
4. Work in a team environment supporting liaison engineering to research root cause and address production discrepancies.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program with 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.

Knowledge, Skills and Abilities:
1. Experience using CATIA V5 to prepare 3D parametric models and 2D drawings. Minimum of 10,000 hours.
2. Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
3. Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS.




The Structures Company is an AA/EOE.
 
Job Number: 301
Job Location: NC
Rate: $55-$60/Hr - **DOE**
Per Diem: Yes
Overtime: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Catia V5 Instructor

Description:
Location: Tulsa, OK
Rate: $60.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
Ideal Candidate will primarily teach, assist and mentor employees with CATIA v5 and SmarTeam. Candidate will support Engineers and be expected to answer questions intelligently in a class setting. This candidate will primarily be on location in Tulsa and be expected to travel back and forth to Savannah and sub tier supplier sites to support the company in Oklahoma.
- CATIA v5 experienced with 5000+ hours.
- All Level 1 tools CATIA v5 (Part Design, Assembly, Drafting).
- Level 2 tools CATIA v5 Generative Surfacing, Free Style Shaping, Generative Sheetmetal, Generative Stress Analysis.
- Other tools: CATIA v5 Composites, Electrical EHI, Capitol Harness, Tubing experience a plus.
- Quantitative experience with Geometric Dimensioning and Tolerances a plus.
- Experience working within PDM systems such as Enovia, SmarTeam or NX/Teamcenter.
- Formal Classroom instruction experience required for CATIA and PDM.

Education and Experience Requirements:
- Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
- See Other Requirements in Job Description.
- 5 years in specific technical discipline or 10 years broad eng experience in several technical disciplines with Bachelors.
- Experience credit considered for related adv degrees limited to 2 years for Masters, 4 years for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principal Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 10486
Job Location: Tulsa, OK
Rate: $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Checker - Mechanical 2D & 3D

Description:
Required Check 2D engineering data and 3D models for conformance to company requirements as directed. Check parts for fit, form and function to the extent that information is available. Must have experience in Product Lifecycle Management (PLM) processes and tools, including checking CATIA v5 , SmarTeam, as well as other CAD datasets, in accordance to Gulfstream requirements as directed. Checkers are responsible for determining the acceptability of data in the following areas: • Accuracy and completeness of engineering product definition data, including CAD and PDM data. • Proper application and compliance with all Engineering and customer drawing requirements. • Use and understanding of GD & T a must. • Dimensioning and tolerancing including familiarity with ASME Y14.5. • Application of best drafting and design practices and procedures. • Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.

Review all current positions posted at www.hi-tecsolutions.com/jobs
 
Job Number: 142810
Job Location: Savannah, GA
Rate: 53.00
Per Diem: yes
Overtime: yes
Duration: LT
Start Date: asap
Input Date: 11/14/2020
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: P O BOX 965280
2886 SANDY PLAINS RD

City, State: MARIETTA, GA 30066
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Design Engineer

Description:
Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Unique Skills:
• Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions Engineering.
• Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
• Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
• Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
• Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
• Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
• Design Engineer will be required to liaison with the shop on engineering issues.
• Design assignments include but are not limited to: -Item Installation Analysis and Similarity Analysis
• Configuration Analysis Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


Principle Duties and Responsibilities:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
• Perform other duties as assigned.
• Advanced degree in engineering, or related curriculum preferred
• The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 24-344
Job Location: Savannah, GA
Rate: $58
Per Diem: YES
Overtime: YES
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Structural Design Engineer Openings

Description:
Design and configuration of composite primary aircraft structure.
Experience during preliminary/conceptual design phase required.
Support of subsystems integration and packaging into primary structure.
Strong knowledge and understanding of latest structural design, as well as manufacturing trends in the Aerospace industry.
Analyze the applicability of new and emerging technologies and advanced techniques.
Serve as a design focal between the program and Tier 1 suppliers.
Provide technical support in design and development of the preliminary structures layout that meets weight, cost, manufacture-ability and certification requirements.
Support new business development, trade studies and proposal activities.
Support technical review of supplier capabilities and progress.

Requirements:
Must be a US or Canadian citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772.
Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure / confidentiality agreement with current or any former employer that would prevent you from fully performing the duties of the position.
Must have a bachelor’s degree in Aerospace or Mechanical Engineering, or similarly related area.
8+ years of experience in performing design of large aerospace structures.
Strong composite structural design background.
Proficiency with CATIA V5 and Teamcenter PLM is preferred.
Knowledge of the conceptual and preliminary design phases of aircraft development is strongly preferred.
Thorough understanding of the structural design requirements for Part 25 certification is preferred.
Highly self-motivated with a strong bias for action, and excellent problem-solving skills across multi-disciplinary skill sets.

The Structures Company, LLC is an AA/EOE.
 
Job Location: Reno, NV
Rate: Open
Per Diem: Yes
Overtime: Possible
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Technician III

Description:
Currently seeking an Advanced Composite Technician. The ideal candidate will possess at least three (3) years of related composite experience.

Under minimal supervision, perform one or more of the following composite part manufacturing functions: complex lay-up, cutting, bagging, autoclave, trimming, and/or complex repairs, in a production environment. Provide specialized technical assistance and interact with team members to resolve manufacturing issues.

Principal Duties and Responsibilities:
Essential Functions:
1. Manufacture a wide variety of composite aircraft parts to meet manufacturing specifications, in a team oriented work environment.
2. Demonstrate the ability to meet the requirements of the Manufacturing Competencies at the appropriate level in the Employee Effectiveness Review.
3. Proficient at reading work orders, blueprints, GAC specifications, lofts, sketches and operation sheets to determine sequence of operations.
4. Must be skilled in the use of special tools and equipment to include precision measuring devices such as 6' scale, 1' micrometer, 6' dial caliper.
5. Check all work and ensure a defect free assembly prior to inspection.
6. Maintain and use all logs and records. Example: MIR sheets, DMTs, Crabs, PCOs, DR/DI, etc. 7. Maintain a neat and orderly work area, and comply with all safety regulations.
8. Support Lean activities.
9. Must be able to meet the physical requirements of the position.
10. Must be able to work any shift.

Education and Experience Requirements:
High School graduate or GED. Basic computer skills. Three (3) years of related composite experience. Ability to work with composite resins and materials. Requires ability to read and interpret blueprints. Must be able to use mathematical formulas to solve dimensional problems using fractions and decimals.

The Structures Company is an AA/EOE.
 
Job Number: 283
Job Location: OK
Rate: DOE
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Data Integrity Checker

Description:
Location: Savannah, GA
Rate: $53.00/HR
Duration: Long Term Contract

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
- Check 2D and 3D engineering data and 3D models for conformance to company requirements as directed.
- Check parts for fit, form and function to the extent that information is available.
- Must have experience in Product Lifecycle Management (PLM) processes and tools, including checking CATIA V5, SmarTeam, as well as other CAD datasets, in accordance to company requirements as directed.

Checkers are responsible for determining the acceptability of data in the following areas:
- Accuracy and completeness of engineering product definition data, including CAD and PDM data.
- Proper application and compliance with all Engineering and customer drawing requirements.
- Use and understanding of GD & T a must.
- Dimensioning and tolerancing including familiarity with ASME Y14.5.
- Application of best drafting and design practices and procedures.
- Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
- Advise Design personnel regarding company drawing and design practices and procedures.
- Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
- Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
- Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
- Knowledge of company parts list & PdocM, a plus.

Essential Duties and Responsibilities
- Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems.
- Ensures designs meet customer criteria, quality standards and FAA requirements.
- Adheres to budget and project schedules.
- Provides design guidance and feedback to other engineering personnel.
- Other duties as assigned.
- Knowledge of industry design and documentation standards.
- Experience with mechanical assemblies and manufacturing technique design.
- Ability to work independently and cross-functionally.
- Experience in communicating with employees/teams in productive and efficient manner.
- Strong communication and problem-solving skills.

Education and Experience Requirements:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principal Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 10373
Job Location: Savannah, GA
Rate: $53.00/HR
Per Diem: Split Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Checker

Description:
Check 2D and 3D engineering data and 3D models for conformance to requirements as directed. Check parts for fit, form and function to the extent that information is available. Must have experience in Product Lifecycle Management (PLM) processes and tools, including checking CATIA v5, SmarTeam, as well as other CAD datasets, in accordance to Gulfstream requirements as directed.

Checkers are responsible for determining the acceptability of data in the following areas:
• Accuracy and completeness of engineering product definition data, including CAD and PDM data.
• Proper application and compliance with all Engineering and customer drawing requirements.
• Use and understanding of GD & T a must.
• Dimensioning and tolerancing including familiarity with ASME Y14.5.
• Application of best drafting and design practices and procedures.
• Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
• Advise Design personnel regarding GAC drawing and design practices and procedures.
• Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
• Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
• Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
 
Job Number: 24-319
Job Location: Savannah, GA
Rate: $53/hr
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer

Description:
Our client is looking for a level 4 Engineer to work in Savannah, Georgia! Apply today with your most recent resume and if you meet the qualifications a recruiter will be in contact with you!

The ideal candidate for this position will perform the following tasks:
* Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
* Is consulted extensively by associates and others as a recognized authority within the field
* Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
* Approach to problem solving balances technical product, cost and schedule
* Works without appreciable direction; work is reviewed from a long-range perspective for desired results
* Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
* Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
* Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
* Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
* Knowledgeable with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
* Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
* Design Engineer will be required to liaison with the shop on engineering issues.
* Design assignments Item Installation Analysis, Similarity Analysis and Mount Configuration along with any other required items.
* Design engineer will employ design standards consistent with company standards and accepted design methods are executed under the direction of the Mechanical Engineering Group Head to meet the manufacturing schedule.
* Additional responsibilities are out lined in the job description and as assigned by the Mechanical Engineering Group Head.

Mandatory Qualifications and Experience:
* Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
* Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors.
* Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Desired Qualifications and Experience:
* Mechanical Design in Aircraft Cabin Interiors, CATIA, Smarteam, AutoCAD, Microsoft Project, Excel and Power Point.

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 130009
Job Location: Savannah, GA
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineers – Aircraft Structural Repairs – Permanent - Canada.

Description:
Design Engineers – Aircraft Structural Repairs – Permanent - Canada.

Candidates sought from the US and Canada ,or those with right to live and work in Canada.

Successful candidates will:

·Actively support our client’s design team to ensure customer expectations are met.
·Design generic repairs for aircraft metallic and composite structures.
·Design specific repairs for damages exceeding Aircraft Structural Repair Publication (ASRP) limitations.
·Support operators with technical support on repairability of their aircraft fleet.
·Perform investigation on in-service structural issues affecting reliability. dispatchability and repairability.
·Participate in the design and support of structural modifications.
·Represent Customer Support in internal and external committees.
·Participate in the continuous improvement initiatives of the Customer Support organization. 

Preferred Experience:

·You hold a Bachelors degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of five (5) years in the aerospace industry.
·You have detailed knowledge of CATIA V5 (preferably R19) and Enovia.
·You are comfortable in interrogating aircraft structure repairs.
·You have knowledge of MS Office software (Word, Excel, PowerPoint, etc).
·You have strong, written and spoken, communication skills in English and French.
·You are available for occasional travel on short notice.

Our Client offers good packages to successful candidates, who join them.

Please quote ref JO0000000225 on application.
 
Job Number: JO0000000225
Job Location: Canada
Rate: Negotiable
Start Date: 03/04/2019
Input Date: 11/14/2020
Firm Name: STRONGFIELD TECHNOLOGIES INC
Attention: Graham Bird
Address: 1200 MCGILL COLLEGE AVE STE 1100
City, State: MONTREAL, PQ H3B 4G7
Country: CANADA
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Designer 4 / NX 8.5 FL

Description:
164134
1729 Designer 4 (Job Number: 19003773, 19003777, 19003782)

Number of Openings: 3

Location(s): United States-Florida-Melbourne


Shift: 1st Shift

Target Start Date: Apr 1, 2019

Target End Date: Oct 4, 2019

Pay Rate: $45/hr

Work Schedule: 9/80

Duration of Assignment: Approx 6 months

Seeking experienced Aircraft Structural Designers.

Candidates should have design experience with a focus on metallic structure, wing structure design, machined part

design, sheet metal and knowledge of GD&T. Familiarity with military and industry standards pertaining to material,

process and hardware.

NX 8.5 or later required with PMI knowledge a must.

Candidate should be familiar with drawing/PDP release process utilizing Teamcenter.

(Siemens) Teamcenter Enterprise / Teamcenter Unified familiarity a plus.


Basic Qualifications:

High School Diploma/ GED plus 8 years minimum aircraft metallic structural design experience.

CAD Experience using Siemens NX 8.5 or later.


Preferred Qualifications:

Prior experience with Northrop Grumman products. (E-2, JSTARS etc.)

(Siemens) Teamcenter Enterprise / Teamcenter Unified or similar PLM software.

Design of aircraft wing structure.

Familiarity with Design Review Process.

Microsoft Office Suite.

Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplishing them simultaneously
 
Job Number: MB-1729
Job Location: Melbourne, FL
Rate: 45/hr max
Per Diem: no
Duration: 6 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EBU Systems Engineer

Description:
EBU Systems Engineering supporting the design and development of commercial aircraft EBU system. This position will support the specification, design, analysis, fabrication, procurement and testing of commercial aircraft EBU systems.

• Must have experience with design, test and certification of EBU systems.
• Experience with Airbus aircraft preferred.
• Experience with system test requirements such as DO-160 preferred.
• Must have Requirements Management (DOORS) experience.
• BS degree in applicable engineering field preferred.

The Structures Company is an AA/EOE.
 
Job Number: 292
Job Location: OK
Rate: $75-$80/Hr.
Per Diem: Yes
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ECS & Pneumatic Subsystems Engineer

Description:
Seeking an ECS & Pneumatic Subsystem Lead Engineer with strong experience enabling him/her to be responsible for all activities related to the design, development, integration, testing and certification of the Environmental Control System (ECS), Cabin Pressurization, Oxygen System, Anti-Ice System and Bleed Air Management for a supersonic business jet. The successful candidate will manage the ECS & Pneumatic systems design and system suppliers, as well as all design and certification activity required.

Duties include, but are not limited to:
• Develop ECS & Pneumatic systems design, architecture and product plans, including qualification and certification plans
• Provide subject matter expert level technical leadership, mentoring and guidance on both practical and theoretical aspects of ECS & Pneumatic systems
• Define requirements for the ECS & Pneumatic systems to ensure compliance with regulations and customer requirements
• Provide validation and verification of ECS & Pneumatic systems requirements
• Perform ECS & Pneumatic systems tests and certification, and provide system and certification documentation
• Manage the ECS & Pneumatic subsystem scheduling, budget, resources and suppliers
• Will be responsible for hiring, developing and leading talent to augment and seamlessly integrate with our world-class team and liaise effectively with our technical support partners.
• The selected candidate will help to define the product development strategy and lead a team of engineers and analysts in that effort.
• She/he will prioritize the allocation of the ECS & Pneumatic resources to meet the milestones of the program schedule, from concept through certification.

Minimum Requirements:
• Must be either a US citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772 and ITAR 120.12
• Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure/confidentiality agreement with current or former employer that would prevent you from performing the duties of the position.
• Minimum of a Bachelor’s Degree in Aerospace, Mechanical Engineering or other relevant Engineering position
• Master’s degree in a technical and/or management specialty preferred
• 10+ years of deep, hands-on experience in ECS systems development, design and testing in Military, Commercial and/or business jet aircraft
• 3+ years of demonstrated experience leading technical resources and teams, both internally and externally, as well as both on-site and off-site
• In-depth and current knowledge of Part 25 regulatory requirements
• Experience and expertise in the development of commercial and/or high-end business jets strongly desired
• Recent experience in developing ECS systems from concept through certification strongly desired
• Must be able to demonstrate a clear understanding, knowledge and ability to define requirements, generate architecture and achieve compliance
 
Job Number: 42-001
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: Possible
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical / Avionic Technician / 2 to 3 years’ of fighter aircraft electrical maintenance experience required - Clearance URGENT CA

Description:
164441
1657-1 Electrical/Avionic Technician
**2 to 3 years’ of fighter aircraft electrical maintenance experience required

Work Site Address: Edwards AFB, CA 93523
Max Pay Rate: $31.85/hr
Start Date: May 2019
End Date: 11 months
Position Type: Contract
2 openings

Job Summary:
Services, repairs, and overhauls F-22 aircraft electrical systems to ensure airworthiness. Repairs, replaces, and rebuilds aircraft electrical systems. Incorporate engineering changes. Replaces and repairs worn or damaged components. Adjusts, repairs, and replaces electrical wiring system and aircraft accessories.

Work typically requires a detailed understanding of the interrelationships of circuits. Perform such tasks as making circuit analyzes, and tracing relationships in signal flow. Use complex test instruments such as high frequency pulse generators, frequency synthesizers, distortion analyzers, and complex computer control equipment. Work may be reviewed by supervisor for general compliance with accepted practices, may provide technical guidance.

Read and interpret engineering drawings, technical manuals, repair manuals, understanding symbols, flags, and general notes - Identify aircraft locations by station, butt-line, and waterline as shown on engineering documentation and technical orders

Regularly required to perform repetitive movements, work overhead, use hands to grasp, handle, and/or feel, reach with hands and arms, talk, and hear. The employee is frequently required to stand, walk, stoop, kneel, squat, crawl, and twist.

Work in a safe and efficient manner while maintaining a clean, FOD-free work area.

Candidate must have a minimum of 2 years’ experience in fighter aircraft electrical maintenance

Knowledgeable of Tool Control, FOD, Supply, HAZMAT, Training, Quality, and Security programs.

F-22 Electrical/Avionic system experience is preferred
F-22 Low Observable materials application (Desired not required)

In order to perform the essential functions of this job, the employee is regularly required to stand, use hands to grasp, handle, and/or feel and reach with hands and arms. The employee is frequently required to walk, climb, balance, stoop, kneel, squat, twist, work overhead, perform repetitive movements, and talk and hear. The employee must regularly lift and/or push or pull up to 20 pounds and frequently lift and/or push or pull up to 50 pounds. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and ability to adjust focus.
 
Job Number: JE-1657-1S
Job Location: Edwards AFB, CA
Rate: 31.85/hr max
Duration: 11 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Description:
AutoCad required. CHS experience preferred. 14 CFR 25 Subpart H - EWIS experience preferred 4) Part 25 Certification Experience for Cabin Interiors preferred 5) Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security, and entertainment systems. 6) Experience with power distribution, lighting, switching, sizing, and routing required. 7) Familiarity in mechanical system design; to include pneumatic supply, oxygen, water & drain, HVAC and pressure control is preferred. 8) Familiarity with aircraft STC procedures preferred.

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Thirteen (13) yrs specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


Position Purpose:
Works on engineering projects containing critical problems, the solution of which requires major technological advances and extensive related development

Principle Duties and Responsibilities:

Responsible for an entire engineering project of major complexity within established scope 2. Makes technical decisions and recommendations that are recognized as authoritative and have an important impact on extensive engineering activities 3. Applies advanced technical principles, theories and concepts based on broad expertise or unique specialized knowledge 4. Leads the development of innovative principles and ideas 5. Acts independently to determine improved methods and/or procedures to optimize technical product, cost and schedule requirements 6. Works under consultative direction; uses independent judgment to accomplish objectives 7. Develops standards and guides for diverse engineering activities 8. Conceives and plans investigation of broad areas of importance for which engineering precedents are lacking in areas critical to the program Perform other duties as assigned.

Advanced degree in engineering or related curriculum preferred

The Structures Company is an AA/EOE.
 
Job Number: 289
Job Location: GA
Rate: Up to $68/Hr.
Per Diem: Yes
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer 4

Description:
Unique Skills:
• AutoCad required, Catia V5 and CHS preferred.
• GV,GVI, electrical system design experience preferred.
• 14 CFR 25 Subpart H - EWIS experience preferred
• Part 25 Certification Experience for Cabin Interiors preferred
• Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
• Experience with power distribution, lighting, switching, sizing and routing.
• Familiarity in mechanical system design
• Familiarity with aircraft STC procedures preferred.
• Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required

Position Purpose:
Works on engineering projects containing critical problems, the solution of which requires major technological advances and extensive related development

Principle Duties and Responsibilities:
• Responsible for an entire engineering project of major complexity within established scope
• Makes technical decisions and recommendations that are recognized as authoritative and have an important impact on extensive engineering activities
• Applies advanced technical principles, theories and concepts based on broad expertise or unique specialized knowledge
• Leads the development of innovative principles and ideas
• Acts independently to determine improved methods and/or procedures to optimize technical product, cost and schedule requirements
• Works under consultative direction; uses independent judgment to accomplish objectives
• Develops standards and guides for diverse engineering activities
• Conceives and plans investigation of broad areas of importance for which engineering precedents are lacking in areas critical to the program Perform other duties as assigned.
• Advanced degree in engineering or related curriculum preferred.
• The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 24-362
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Location: Savannah, GA
Rate: $68.00/HR
Duration: Long Term Contract
Shift: 4x10
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
1. AutoCad required. CHS experience preferred
2. Company Completions electrical system design experience preferred.
3. 14 CFR 25 Subpart H - EWIS experience preferred
4. Part 25 Certification Experience for Cabin Interiors preferred
5. Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security, and entertainment systems.
6. Experience with power distribution, lighting, switching, sizing, and routing required.
7. Familiarity in mechanical system design; to include pneumatic supply, oxygen, water & drain, HVAC and pressure control is preferred.
8. Familiarity with aircraft STC procedures preferred.

Education and Experience Requirements:
1. Bachelor's Degree in engineering or related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Thirteen (13) yrs specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
1. Works on engineering projects containing critical problems, the solution of which requires major technological advances and extensive related development

Principle Duties and Responsibilities:
Essential Functions:
1. Responsible for an entire engineering project of major complexity within established scope
2. Makes technical decisions and recommendations that are recognized as authoritative and have an important impact on extensive engineering activities
3. Applies advanced technical principles, theories and concepts based on broad expertise or unique specialized knowledge
4. Leads the development of innovative principles and ideas
5. Acts independently to determine improved methods and/or procedures to optimize technical product, cost and schedule requirements
6. Works under consultative direction; uses independent judgment to accomplish objectives
7. Develops standards and guides for diverse engineering activities
8. Conceives and plans investigation of broad areas of importance for which engineering precedents are lacking in areas critical to the program Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering or related curriculum preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 10651
Job Location: Savannah, GA
Rate: $68.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - AutoCAD

Description:
1) AutoCad required. CHS experience preferred 2) Gulfstream Completions electrical system design experience preferred. 3) 14 CFR 25 Subpart H - EWIS experience preferred 4) Part 25 Certification Experience for Cabin Interiors preferred 5) Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security, and entertainment systems. 6) Experience with power distribution, lighting, switching, sizing, and routing required. 7) Familiarity in mechanical system design; to include pneumatic supply, oxygen, water & drain, HVAC and pressure control is preferred. 8) Familiarity with aircraft STC procedures preferred.
 
Job Number: 19-144018
Job Location: GA
Rate: $68.00
Per Diem: Yes
Overtime: Possible
Duration: Long Term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Propulsion Experience Needed

Description:
Description:
Responsible for the design, testing and certification of engine electrical systems and harnesses.

Requirements:
• Must have aircraft engine experience
• Must have aircraft EBU experience
• Must have commercial aircraft experience, preferably Airbus
• Must have experience designing and testing engine wire harnesses
• Must have experience with CAD software such as Catia V5, Mentor Graphics, EWIS, etc.
• DO-178 or DO-254 Certification
• Electric Actuation and Propulsion
• Vehicle Communications System
• MS Office, Project and MS Visio

The Structures Company is an AA/EOE.
 
Job Number: 294
Job Location: OK
Rate: $75/Hr.
Per Diem: Yes
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Wire Harness/Equipment Installation/Structural Design Engineers - Excellent Rates

Description:
*Must have Active Secret Clearance
*Catia V5
*Engineering Degree
*Composites & Materials
*Airframe Design Exp. Required
*Fibersim and/or Teamcenter is a plus
*responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design. Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations.

Email resume to: mmccarthy@pdstech.com
 
Job Number: Lock-Electrical Wire
Job Location: Palmdale, CA
Rate: up to $140.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 1 year+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Wire Harness/Equipment Installation/Structural Design Engineers - Excellent Rates

Description:
*Must have Active Secret Clearance
*Catia V5
*Engineering Degree
*Composites & Materials
*Airframe Design Exp. Required
*Fibersim and/or Teamcenter is a plus
*responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design. Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations.

Email resume to: mmccarthy@pdstech.com
 
Job Number: Lock-Electrical Wire
Job Location: Palmdale, CA
Rate: up to $140.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 1 year+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrophysics Engr/Scien 3

Description:
Electrophysics Engr/Scien 3

Location: Oklahoma City, OK
Duration: 6 months

Description:
OKC Electromagnetic Effects Group is seeking experienced electromagnetic effects engineer. The candidate will mentor and coach lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for Commercial Airplanes (737, 767, 787 and 777) diverse projects. Main area of focus will be to review supplier and partner qualification data to ensure compliance to client and FAA EME requirements and to provide engineering and technical decisions for client Military Aircraft, Military Derivative Aircraft and Rotorcraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, E-6, AC-130U, B-1B, B-2, B-52, V-22, and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft electromagnetics effect on the various platforms.

Assignments may deal with:
- Reviewing supplier and partner qualification data
- Nuclear Hardening analysis and test
- EMI/C analysis and test
- EMSEC/TEMPEST analysis and test
- HIRF/Lightning analysis and test
- RF Co-Site analysis
- Antenna Coupling analysis
- Electrical Power Quality and Load analysis
- Test Automation for aircraft modifications.

Other job responsibilities may include:
- Develops and validates requirements for various communication, sensor, electronic warfare and other electromagnetic systems and components
- Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures
- Develops architectures to integrate systems and components into higher level systems and platforms
- Performs trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around established requirements
- Defines and conducts tests to validate performance of designs to requirements
- Manages appropriate aspects of supplier and partner performance to ensure compliance to requirements
- Provides support to products throughout their lifecycle by developing root-cause analysis of anomalies and other engineering support as requested
- Supports project management by providing work statement, budget, schedule and other required inputs and by reporting project status
- Writes appropriate sections of proposals to support development of new business
- Works under general mentorship.

Skill Code: 62Q-Electromagnetic Compatibility

Education / Experience:
Degree and typical experience in engineering classification: Bachelor's and 5 or more years' experience, Master's degree with 3 or more years' experience or PhD degree with experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Please share updated resume at ravi@iconma.com
 
Job Number: 19-03720
Job Location: Oklahoma City,, OK
Per Diem: Available
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/234-6123
800 Phone: 866/914-9724
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Furnishing Engineer (TSII)

Description:
Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Unique Skills:
The ideal candidate for the Mechanical Systems Engineer (TS II) opening at Gulfstream should have the following experience but not required:
• Prior experience in Mechanized systems such as Doors, Equipment and Furnishings, Flight Control or Landing Gear. Prior Gulfstream experience is desired.
• Must have experience with Catia V5, Smarteam Database, Surfacing & Kinematics is highly desired.
• Past experience with Secondary Structure and Machined parts with Model Base Definition and GD&T proficient.
• 14 CFR Part 25 A/C Cert familiarity
• Mechanical Systems Engineering experience required. ARP4754A experience desired
• Catia V5, Smarteam Database, Surfacing and Kinematics Highly Desired.

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
• 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Principle Duties and Responsibilities:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
• Perform other duties as assigned.

Other Requirements:
• Advanced degree in engineering, or related curriculum preferred.
• The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 24-345
Job Location: Savannah, GA
Rate: $63/hr
Per Diem: YES
Overtime: YES
Duration: 1 YR+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Furnishings Engineer

Description:
Location: Savannah, GA
Rate: $63.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

The ideal candidate for the position should have the following experience but not required:
- Prior experience in Mechanized systems such as Doors, Equipment and Furnishings, Flight Control or Landing Gear.
- Prior company experience is desired.
- Must have experience with Catia V5, Smarteam Database, Surfacing & Kinematics is highly desired.
- Past experience with Secondary Structure and Machined parts with Model Base Definition and GD&T proficient.
- 14 CFR Part 25 A/C Cert familiarity
- Mechanical Systems Engineering experience required.
- ARP4754A experience desired

Education and Experience Requirements:
- Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
- 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
- Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
- Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services

Principle Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 10701
Job Location: Savannah, GA
Rate: $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FPGA Design/Verification Engineer - Clearance TX

Description:
163983
1333-1 FPGA Design/Verification Engineer

Work Location: Fort Worth, TX
Status: Open

Qty: 2
Desired Start Date: 1/28/2019
End Date: 8/1/2019

Job Description:
Researches, designs, develops, and tests a variety of electronic equipment and systems, including radar and radiation detection equipment; radio, television and other communications equipment and systems; circuitry components; analog and digital computers; and control and test equipment.

This position is for an engineer working in the Fort Worth IFG Hardware Design Team. Job responsibilities will include supporting development of Hardware, Software & Firmware for aircraft.

Responsibilities include:
• Electronic circuit design including Digital and Analog
• Electronic circuit board design, lay out, and routing
• FPGA development, integration, and test
• Electronic hardware testing and troubleshooting
• Support Software Development efforts for target hardware
• Author and Review Hardware Specifications
• Development and review of detailed engineering documents for firmware and hardware release
• Lead and Develop early career team members

Work Location: Fort Worth, TX
Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: JE-1333-1S
Job Location: Fort Worth, TX
Rate: open
Per Diem: no
Duration: 8 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fatigue & Damage Tolerance Eng

Description:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience.
• Fatigue and Damage tolerance experience preferred on primary and secondary airframe metallic structure
• Strong background in classical stress analysis.
• Experience with Catia V5 to support stress analysis and drawing release.
• Experience with reviewing 2D drawings.
• Ability to work independently under limited supervision.
• Experience with aircraft modifications and repairs (STC, MRB, or Service) preferred.
• Experience with Patran/Nastran is a plus.
• Strong preference for engineers that enjoy working in a collaborative environment.
Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.
 
Job Number: 143023
Job Location: Savannah, GA
Rate: 75.00 -80.00
Per Diem: yes
Overtime: yes
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: P O BOX 965280
2886 SANDY PLAINS RD

City, State: MARIETTA, GA 30066
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fatigue and Damage Tolerance Engineer

Description:
Location: Savannah, GA
Rate: $75.00 - $80.00/HR
Duration: Long Term Contract

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
- Fatigue and Damage tolerance experience preferred on primary and secondary airframe metallic structure
- Strong background in classical stress analysis.
- Experience with Catia V5 to support stress analysis and drawing release.
- Experience with reviewing 2D drawings.
- Ability to work independently under limited supervision.
- Experience with aircraft modifications and repairs (STC, MRB, or Service) preferred.
- Experience with Patran/Nastran is a plus.
- Strong preference for engineers that enjoy working in a collaborative environment.
- Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) years in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principle Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering related field preferred
The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 10399
Job Location: Savannah, GA
Rate: $75.00 - $80.00/HR
Per Diem: Split Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fatigue and Damage Tolerance Engineer

Description:
Fatigue and Damage Tolerance Engineer has experience preferred on primary and secondary airframe metallic structure • Strong background in classical stress analysis. • Experience with Catia V5 to support stress analysis and drawing release. • Experience with reviewing 2D drawings. • Ability to work independently under limited supervision. • Experience with aircraft modifications and repairs (STC, MRB, or Service) preferred. • Experience with Patran/Nastran is a plus. • Strong preference for engineers that enjoy working in a collaborative environment. • Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.





Fatigue and Damage Tolerance Engineer contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area 

Education and Experience Requirements:

Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters, 4 yrs. for PhD in fields applicable to this job. 
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Final Aviation Inspection Technician

Description:
1st & 2nd shift opportunities await the right candidate in Mesa for Aviation Inspector to perform final inspection.

SUMMARY

Inspects mechanical final assembly installations of the aircraft such as fuselage, landing gears, and tail assemblies. Inspects systems such as hydraulic, rotor, oil, heat and engine. Rechecks work after adjustment or repair. May monitor and verify quality in accordance with statistical process or other control procedures. Provides other inspection and quality services to ensure company products and processes meet customer, company, and other specifications by performing the following duties.

DUTIES AND RESPONSIBILITIES include the following.

" Visually and physically inspects materials, components, subassemblies, assemblies, tools, and final product configuration using blueprints, sketches, engineering drawings, and orders, and other applicable sources to observe, measure, record conformity to customer, regulatory, and company specifications

" Verifies production and engineering test processes for compliance with process methods and procedures

" Records compliance with quality standards to verify that company products and processes meet customer, company, and other specifications

" Solves inspection problems; methods-procedures, plans, and details

" Audits products and processes to verify system

" Maintains necessary inspection logs and writes inspection reports



SKILLS AND ABILITIES

" Thorough proficiency with measuring instruments such as scales, calipers, micrometers, depth gauges, and various types of precision measuring equipment.

" Requires a thorough understanding of all pertinent manufacturing, production and engineering test processes.

" Proficient with Microsoft Office to include Word, Excel and PowerPoint.

" Participation in the FAA Drug Test Program is required.

" The ability to understand and follow instructions and the ability to concentrate is required

" Excellent written, verbal, communication and interpersonal skills.

" The ability to get along with others or to be part of a team.

" Access to Export Control Information.

" Regular attendance at the worksite.

EDUCATION and/or EXPERIENCE

" This job requires 7 years of aviation production/maintenance titled inspector experience or 10 years aviation production/maintenance related experience. An equivalent combination of education and experience can be considered

Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-14814
Job Location: Mesa, AZ
Rate: 25.0USD/Hour
Per Diem: --
Overtime: --
Start Date: 2019-04-11 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Camille Hannes
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
We are seeking Flight Test Engineers to join us in Moses Lake, WA to support an exciting new aircraft project. The ideal candidate in this position will be involved in a range of airplane flight test operations including but not limited to:

Support engineering with test plan creation.
Discuss, write and review test cards and test hazard analysis
Support and/or lead test preparation activities, test execution, post-test activities
Support and/or lead pre and post flight briefings.
Monitor live flight data, either via telemetry or onboard flight test aircraft
Process, analyze, and draw conclusions from post flight data.
Make assessments to ensure safety of flight determination.
Document flight test design problems for long term fix.
Generate and review appropriate restrictions/ limitations documentation.
Update monitoring screens for specific testing and/or restriction monitoring.


Requirements


5+ years relevant work experience related to experimental flight test operations.
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
Strong ability to analyze results
Communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related.
 
Job Location: Moses Lake, WA
Per Diem: Possible
Overtime: Yes
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flutter & Dynamic Loads Engineer

Description:
Location: Savannah, GA
Rate: $71.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

As a Contract Engineer in Flutter & Dynamic Loads, you will:
- Provide solutions for aircraft flutter and vibration problems
- Analyze aircraft structural dynamic response and develop load distributions for gust, landing and taxi conditions.
- Analyze aircraft for flutter and determine flutter margins.

What you'll bring to the team:
- Knowledge of aircraft aero elasticity principles and concepts
- Good general knowledge of FAR/EASA Part 25 requirements
- Experience in structural dynamics modeling
- Experience with MSC Nastran and Patran or a comparable application
- Experience with ground tests such as ground vibration tests or landing gear drop tests
- Experience with flutter flight testing
- Experience with dynamic analyses such as engine fan blade out or aircraft crash landing is a plus
- Experience with aero servo elasticity is a plus

What the Loads & Dynamics team does:
- Creating and delivering a world class aviation experience
- Contributing to the certification of world class business jet aircraft

Education:
- Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
- See Other Requirements in Job Description.
- 5 years in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
- Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
 
Job Number: 10461
Job Location: Savannah, GA
Rate: $71.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fuel Cell Mechanic URGENT URGENT / no clearance / 3 years’ aircraft fuel cell experience required SC

Description:
164388
Job Title: Fuel Cell Mechanic

Work Site Address: Greenville, SC 29605
Max Pay Rate: 25-29/hr DOE
Start Date: ASAP
End Date: 6 months
Position Type: Contract

3 years’ aircraft fuel cell experience required

Job Summary:
Performs removal, installation, and inspection functions of fuel cells in addition to assembly, and installation of components such as fuel lines, hardware, and fittings on various aircraft. Analyzes various aircraft sealing, structural, and assembly drawings, to detect seal level deficiencies on aircraft. Diagnoses results of leak test to detect drawing, specification, structural and assembly sealing errors. Recommends corrective action necessary to correct deficiencies. Performs disassembly and teardown operations of aircraft fuel systems and related components. Removes fuel cells and components from aircraft, following specific procedures and techniques. Prepares cavity for installation of fuel cells and components. Installs fuel cells and components, following specific procedures and techniques. Uses appropriate pressure test equipment, and make repairs as required. Works from operations shop orders, diagrams, blueprints, engineering orders, mil-specs and verbal instructions. Work with jigs, fixtures, and various tooling, as operations requires. In order to perform the essential functions of this job, the employee is regularly required to perform confined space entry into C-130 and P-3 aircraft fuel tanks, the opening of which is approximately 10” x 16”.

Qualifications and Education Requirements
Must be able to read and speak English. Comprehend documents such as safety rules, operating maintenance instructions and procedure manuals.

Mission essential functions and other duties may be assigned as required.

Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company.

• Candidate must possess 3 years aircraft fuel cell experience.
• Candidate must provide tools in accordance with minimum tool listing, shadowed and etched per company policy/procedures.
• Candidate must have the ability to become confined space certified for entry into aircraft fuel tanks with an opening of 10”x16”.
• Candidate must comply with FAA DOT medical requirements for employee performing a safety sensitive function.

Requires respirator physical, FAA DOT medical and the ability to become confined space certified. Must be able to become confined space certified for entry into P-3 and/or C-130 Fuel Cells
 
Job Number: LM-003
Job Location: Greenville, SC
Rate: 25-29/hr DOE
Per Diem: no
Duration: 6 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fuel Systems Design Engineer

Description:
The Engineer Fuel System Designer is responsible for the design of the fuel system installations and related system integration. This designer will join an established design team to execute design changes for the HA-420 aircraft related to product improvements, cost savings, weight savings and other minor and major change projects. Although the position will reside in the fuel systems engineering team, the role will also involve working on propulsion system design activities as required by the overall team workload.

Duties and Responsibilities:
• The primary role of this position will be to create design packages that include 3-D models (in Catia) as well as 2-D drawings. This role will encompass the execution of the design from the concept phase through to drawing release
• This role will interface with the engineers within the department as well as other departments and organizations in the company during the development of the design package
• The ideal candidate should be able to work well with the senior designers within the team but also be able to be self-sufficient and able to manage


Education, Work Experience, Certification and/or Licensure:
• Bachelor degree in an engineering related discipline
• Minimum of 3 years of previous design experience


Knowledge, Skills and Abilities:
• Proficient in Catia V5
• Familiar with Microsoft Office Products
• Familiar with FAR Part 23 or Part 25
• Familiar with Industry standards


The Structures Company is an AA/EOE.
 
Job Number: 298
Job Location: NC
Rate: OPEN - **DOE**
Per Diem: Yes
Overtime: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Human Performance Analyst and Investigator

Description:
Currently looking for an experienced Human Performance Analyst to fill an opening with a company located in Moses Lake, WA. Interested candidates should have a Bachelor’s Degree in Safety, Human Factors, Risk Management, Aviation Maintenance, Aeronautics, or a related field, along with at least 2 years’ experience after earning a bachelor’s degree, working directly as a specialist or instructor of human factors or human performance or flight physiology.

Responsibilities of the Human Performance Analyst

Serve as the safety team’s expert on human performance, team dynamics, and flight physiology.
Advise aircrew, dispatchers, test managers, and the Flight Test Safety Officer on scientific aspects of human psychology, physiology, ergonomics, and anthropometrics.
Provide human performance insights to help the Flight Test Safety Officer prepare Test Hazard Analyses, Safety Review Boards, and related functions.
Assess proposed flight manual changes and procedures for adherence to best practices in human performance.
Work with the Flight Test Safety Officer to develop a program of non-punitive observation of flight simulations.
Perform the observations, then debrief the flight crew and trend the data collected in a fashion similar to Line Operations Safety Assessments (LOSAs), but limited to the simulator.
Carefully review event reports and newly found hazards for human elements and how they impact risk and potential mitigations.
Develop and administer psychographic surveys to determine safety cultures and climates present in different parts of the organization, trend how they change over time, and analyze possible causes responsible for the changes.
Establish, adjust, and track Safety Performance Indicators (SPIs) and Allowable Levels of Safety Performance (ALoSP) associated with human performance, as part of SMS Safety Assurance requirements.
Create original and customized courseware in CRM/TEM and human performance for the unique intercultural employees and then coordinate with other members of the safety team to facilitate and instruct using innovative methods that use the most modern education and training technology.
Provide expert insights on the psychological barriers to change as new safety initiatives are fielded.
Create a system for tracking the currency of aircrew flight physiology training, to include altitude chamber initial and recurrent training.
Perform ergonomic assessments of workplace settings, ranging from aircraft seating to office functions conducive to repetitive stress disorder.
Work shifts as the “on-call” safety representative for time-sensitive safety issues, to include occasionally being on-call after normal business hours.
Assist and/or lead incident investigations and participate in management review of all serious incidents.
Develops and implements the human performance elements of the Risk Management (RM) program and instructs strategic and real-time RM principles to employees and executive staff.
Participate in annual budget and requirements development process for the safety team.


Requirements
Bachelor’s Degree in Safety, Human Factors, Risk Management, Aviation Maintenance, Aeronautics, or a related field.
At least 2 years’ experience after earning a bachelor’s degree, working directly as a specialist or instructor of human factors or human performance or flight physiology.
Current driver's license and current civilian passport or ability to obtain passport.
Ability to pass drug screening test.
Respectful of other national and professional cultures and possessing a willingness to learn about other cultures.
Ability to use computers and associated software programs, such as MS Word, PowerPoint, and Excel.
Ability to integrate smoothly into a fast-paced technological environment while remaining calm in situations where others may be overwhelmed.
Ability to field and prioritize a multitude of near simultaneous request from different members of a team while remaining courteous, positive, and effective.
Strong analytical skills with demonstrated problem solving ability.
Excellent written and verbal communication skills for presenting safety and human factors information.
Excellent interpersonal skills and intercultural sensitivity to work effectively with all levels of an international organization.
Preferred

Master’s degree in Safety, Human Factors, Risk Management, Aviation Maintenance, Aeronautics, or a related field.
At least 2 years’ experience after earning a master’s degree, working directly as a specialist or instructor of human factors or human performance or flight physiology.
An understanding of the ICAO or FAA SMS organizing framework.
Experience conducting human factors analyses, such as task analyses and human error analyses, associated with accidents, incidents, or voluntary hazard reporting such as the Aviation Safety Action Program (ASAP).
 
Job Location: Moses Lake, WA
Per Diem: Possible
Overtime: Yes
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Interior Design Engineer

Description:
Interior Design Engineer for Aircraft Cabin Interiors in Completions Engineering. Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations. -Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis. -Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements. -Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam. -Design Engineer will be required to liaison with the shop on engineering issues. Design assignments include but are not limited to: -Item Installation Analysis -Similarity Analysis -Configuration Analysis Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs. in specific technical discipline or fifteen (15) yrs. broad end experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Jr. Avionics Systems Engineer

Description:
General Summary:
The Avionics System Engineer will be responsible for the design, development, and integration of the assigned avionics systems for the aircraft.


Duties and Responsibilities:
• Define, plan, and develop complex systems level requirements to support the avionic systems.
• Perform systems level integration activities for aircraft avionic systems including: Control and Display Systems; Navigations Systems; Communication Systems; Surveillance Systems; and Cabin Management Systems
• Interface with suppliers to ensure technical requirements are met to support aircraft development need dates
• Provide technical assistance to production and customer service departments for support of system technical inquires and issue resolution
• Perform system evaluation and analysis to verify the system design compliance with functional requirements
• Coordinate with cross-functional team members to complete assignments/projects as defined and on schedule
• Develop targeted system level enhancements to address customer feedback and product improvement initiatives
• Conduct system lab testing and aircraft functional testing
• Prepare presentations on avionics system design/development status
• Support system analyses for avionic systems
Qualifications


Education, Work Experience, Certification and/or Licensure:
• Bachelors’ degree in Engineering from a four year college or university; preferably in Electrical/Electronics Engineering or Aerospace Engineering
• Minimum of 6 years to a maximum of 20 years’ experience working with integrated aircraft avionic systems in the areas of design engineering, system analysis, and system test


Knowledge, Skills and Abilities:
• Working knowledge of design requirements of 14CFRPart 23
• Proficiency in writing technical documentation and reports involving test data and analysis
• Familiarity with avionics/electrical test laboratories and lab equipment
• Working knowledge of System qualification requirements including DO-160E/F for environmental, DO-178B for software, and DO-254 for complex electronic hardware
• Proficiency in Microsoft Office suite (Word, Excel, Project, PowerPoint is required)
• Proficiency in requirements management tools such as DOORS
• Proficiency in PLM Tools such as TeamCenter and SAP
• Ability to handle complex work assignments
• Ability to work independently and within a multi-functional team environment




The Structures Company, LLC is an AA/EOE.
 
Job Number: 296
Job Location: NC
Rate: $50/Hr.
Per Diem: Yes
Overtime: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Jr. Flight Controls Design Engineer

Description:
Design Engineer responsible for the conceptual design and production engineering of Aircraft Flight Control Systems. The candidate will be responsible for conceptual layout, detailed design and aircraft production & in-service design and modification.


Duties and Responsibilities:
• Generates Engineering Models and Drawings utilizing CATIA Version 5.
• Performs trade studies for Flight Control Systems to identify optimal engineering solution.
• Perform clean sheet component layouts for Flight Control Systems in support of schematic architecture
• Perform kinematic studies and system performance analysis for powered and unpowered Flight Control Systems
• Utilizes drafting and Geometrical Dimensioning & Tolerancing knowledge to optimize part design for cost and functionality.
• Collaborates with the Integrated Product Team to resolve cross functional issues.
• Implements Industry best engineering practices (design for manufacturing, design for reliability and design for maintainability).
• Have the ability to understand and apply certification requirements.
• Have the ability to generate Flight Controls certification documents in support of design and qualification requirements.
• Implement design solutions optimized for cost and weight.
• Manages task execution to ensure on-time and on-target completion.
• Searches for problem root cause and develop corrective action plans and solutions.
• Participates in design / development reviews with management and internal customers. The candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience.
• Investigate and disposition production line build issues. Must have a working knowledge with Material Review Board processes.


Education, Work Experience, Certification and/or Licensure:
• BS in Mechanical Engineering with a minimum of 4 years directly related experience required
• Some Travel will be required


Knowledge, Skills and Abilities:
• Proficient in use of CATIA Version 5.
• Proficient in use of Kinematic function within CATIA Version 5.
• Advanced knowledge of drafting rules.
• Advanced knowledge of Geometrical Dimensioning and Tolerancing.
• Proficient in Microsoft Office Products.
• Functional knowledge of Team Center of similar Product Life Cycle tools
• Familiar with FAR Part 23 or Part 25.
• Functional knowledge of SAP




The Structures Company is an AA/EOE.
 
Job Number: 299
Job Location: NC
Rate: $52/Hr.
Per Diem: Yes
Overtime: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Landing Gear and Hydraulic Systems Design Engineer

Description:
General Summary:
Design Engineer responsible for the conceptual design and production engineering of Aircraft Landing Gear and Hydraulic Systems. The candidate will be responsible for conceptual layout, detailed design and aircraft production & in-service design and modification.

Duties and Responsibilities:
1. Generates Engineering Models and Drawings utilizing CATIA Version 5.
2. Performs trade studies to identify optimal engineering solution.
3. Collaborates with the Integrated Product Team to resolve cross functional issues.
4. Reviews work performed by others and ensure work is to the highest standard.
5. Implements Industry best engineering practices (design for manufacturing, design for reliability and design for maintainability).
6. Have the ability to understand and apply certification requirements.
7. Implement design solutions optimized for cost and weight.
8. Manages task execution to ensure on-time and on-target completion.
9. Utilizes drafting and Geometrical Dimensioning &Tolerancing knowledge to optimize part design for cost and functionality.
10. Searches for problem root cause and develop corrective action plans and solutions.
11. Serves as a primary interface within the Landing Gear and Hydraulic Systems group to ensure effective communication, coordination, and timely completion of project milestones.
12. Leads or participates in design / development reviews with management and internal customers. The candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience.

Education, Work Experience, Certification and/or Licensure:

1. BS in Mechanical Engineering with 10-15 years directly related experience
a. OR MS / MBA with 8-13 years of experience
b. OR 18-23 years directly related experience
2. Some Travel will be required

Knowledge, Skills and Abilities:
1. Proficient in use of CATIA Version 5.
2. Advanced knowledge of drafting rules.
3. Advanced knowledge of Geometrical Dimensioning and Tolerancing.
4. Proficient in Microsoft Office Products.
5. Use of Team Center.
6. Familiar with FAR Part 23 or Part 25.
7. Functional knowledge of SAP.
 
Job Number: 28-038
Job Location: Greensboro, NC
Rate: Up to $70
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Lead Systems Engineer - Military Open Avionics

Description:
Lead Systems Engineer (Military Open Avionics)

Location: Grand Rapids, MI (49512)

12+ month contract

Must be a US Citizen or a Permanent Resident

Role Summary/Purpose

The Lead Systems Engineer will demonstrate development of systems architectures and set technical direction to a small team responsible for development and integration of avionics subsystems onto military aircraft platforms. In this role, you will utilize your experience and expertise to solve problems, develop and execute objectives for self and others, and have the ability to effect short-term and long-term business goals.

Essential Responsibilities:

Support the full lifecycle of systems development for avionics products including concept design, system architecture, definition and management of requirements, modeling and simulation, managing suppliers, leading teams, managing cost and schedule, sub-system and aircraft integration, verification, and flight testing
Interface with customers, partner companies, suppliers, and other senior leadership within the company
Work as part of an Integrated multi-company Avionics and Sub-System development team to define, develop, verify and qualify an open systems solutions for military application
Lead and participate in technical reviews of military avionics systems across the business
Support and coordinate with interfacing organizations such as subsystem avionics product groups and third-party suppliers
Provide technical support for the system safety and certification processes for military avionics systems
Lead activities such as; failure Investigations, root causes analysis and implementation of corrective actions, lesson learned, issues and design standards updates
Provide Engineering support, within one’s specialty, to teams working on performance, cost reduction and quality initiatives
Protect the Intellectual Property rights of the Company
Develop and implement training modules as necessary
Qualifications/Requirements:

Bachelor’s Degree in Engineering, Physics, Chemistry, Mathematics, or Computer Science from an accredited college or university
Minimum 2 years of technical and/or project leadership experience in Military Avionics Systems or related Product design and development
Minimum 2 years of experience in Military Avionics Systems and sub-systems requirements definition, design, architecture, integration, verification, and qualification
Military Rotorcraft experience REQUIRED


Desired Characteristics:

Model-based systems engineering experience including DoDAF, UML/SysML
Prior experience in defining architectures and requirements for Military Avionics Systems
Ability to guide and lead others not in a direct reporting relationship
Strong technical and project leadership experience in Military Avionics Systems development
Experience in sub-system requirements definition for mission systems, displays / crew interface systems, navigation sensors and radios, datalink, autoflight systems, on-board maintenance systems, and integrated surveillance systems
Experience with ARINC 661, ARINC 664 and ARINC 653 development standards
Experience with DO-178B, DO-254, DO-297, ARP-4754 certification standards
Experience using models to simulate and validate the system design and architecture
Familiarity with Systems Engineering processes including requirements definition, aircraft integration, flight testing, system safety, and requirements verification
Experience in technical and project leadership for large military aircraft programs
Strong oral and written communication skills
Strong interpersonal and leadership skills
Demonstrated ability to analyze and resolve problems
Ability to document, plan, market, and execute programs
Demonstrated leadership in advancing the state of the art in a technical specialty


____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 56662
Job Location: Grand Rapids, MI
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12+ months
Start Date: 04/29/19
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Liaison Engineer

Description:
Location: Savannah, GA
Rate: $54.67/HR
Duration: Long Term Contract

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
- The primary function of Aircraft Completions Liaison Engineering department is to support operations aircraft by coordinating all engineering efforts required to facilitate the installation of the aircraft interior.
- Actively develop engineering product improvements.
- The Liaison engineer shall support aircraft customization requests including design, fabrication, testing, and final delivery.
- Additional responsibilities include developing alternative design approaches, including establishing design verification & validation models specification of applicable test, conductance of test to show compliance with applicable regulations.
- Successful applicant will be self-motivated, and able to develop an approach from initial procedure review, data processing, task optimization, and specifically communication of technical information to a wide range of audiences, meeting customer needs.
- Candidates should have a willingness to work off-shift and weekend hours on occasion when program milestones require.
- Applicants must be willing to constantly review existing processes and methods for continuous improvement.
- Ideal candidates for the Completions Liaison Engineer will have mechanical engineering and previous liaison engineering experience with cabin interiors and systems.
- Ensure aircraft schedule and budgets are met to support schedule for each aircraft's Supplemental Type Certification (STC) for on-time customer delivery.
- Commodity support to include but not limited to: Seats, Galley, Lavatories, Liners, Water System, and Mechanical Systems

Education and Experience Requirements:
- Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
- See Other Requirements in Job Description.
- 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
- Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principal Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 10303
Job Location: Savannah, GA
Rate: $54.67/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Loads & Dynamics Engineer

Description:
Loads and Dynamics Engineer
• Support loads event simulation model development and validation of loads criteria for suborbital space missions
• Support pre-flight preparation including review of test limitations, flight test plans and procedures, flight readiness reviews, mission control room support, and post flight analysis
• Works with other engineering groups to ensure proper application of design and loads requirements
• Develop airframe design loads, component loads, fatigue spectra, and environmental specification
• Supports entry into commercial service by ensuring that regulatory and internal company requirements related to loads are met
• Develop standardized analysis and reporting tools
• Perform model updates from data collected during vehicle or component testing and data created with analytical tools
• Develop and maintain loads databases for use in analysis of WK2 and SS2 during all flight phases
• Develop and substantiate rational loads criteria and requirements for unique vehicles with unconventional configurations
• Graduate degree in Aerospace Engineering, and/or equivalent, with minimum of 5 years of experience in external loads and dynamics development
• Experiences in wind-tunnel and flight test aerodynamic and loads model validation
• Experience with full aircraft analysis – transonic required, supersonic and launch vehicle desirable
• Test plan development and data analysis experience a strong plus
• Experience in the conduct of flight test, including familiarity with standard flight test practices and safety processes strong plus.
• Working knowledge of aircraft and space systems and familiarity with relevant aerospace standards (FAA, FAA‐AST etc.)
• Advanced skills with Simulink, MATLAB, Fortran, C, C++, and software development best practices.
• CATIA V5 and NASTRAN experiences preferred.

The Structures Company is an AA/EOE.
 
Job Number: 260
Job Location: CA
Rate: DOE
Per Diem: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Logistics Management Analyst

Description:
Logistics Management Analyst
Location: Fort Worth, TX
Pay Rate: $39.41
Duration: 1 Year
Shift: First
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**

Execute the efficient flow of military aircraft parts, components and support equipment around the globe within a diverse team environment.
Desired knowledge, skills and expertise:
- Export Licensing, Documentation & Logistics
- EAR/ITAR Jurisdiction Determination,
- Schedule B / Harmonized Tariff System (HTS) classification.
- Federal Trade Regulations (FTR) including AES / ACE Electronic Export Information submittals.
- International Incoterms, exporter of record and importer of record requirements
- Global Trade Services (GTS) and SAP software.
- IATA and DOT Dangerous Goods Regulations
- Customs Clearance Process awareness

Flexible working hours required
SAP - 1+ years experience preferred
 
Job Number: 10490
Job Location: Fort Worth, TX
Rate: 39.41
Per Diem: Split Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Logistics Management Analyst TX

Description:
163802
1296-1 Logistics Management Analyst
Work Location: Fort Worth, TX
Status: Open

Qty: 1
Desired Start Date: 1/29/2019
End Date: 1/28/2020

Job Description:
Execute the efficient flow of military aircraft parts, components and support equipment around the globe within a diverse team environment.
Desired knowledge, skills and expertise:
- Export Licensing, Documentation & Logistics
- EAR/ITAR Jurisdiction Determination,
- Schedule B / Harmonized Tariff System (HTS) classification.
- Federal Trade Regulations (FTR) including AES / ACE Electronic Export Information submittals.
- International Incoterms, exporter of record and importer of record requirements
- Global Trade Services (GTS) and SAP software.
- IATA and DOT Dangerous Goods Regulations
- Customs Clearance Process awareness

**Flexible working hours required

Region: Fort Worth, TX
Level: Level 2: BS+4-8 YRS or MS+2-6 YRS
Pay Rate: $38.00 Hourly

Experience
Software Skills SAP No 1
 
Job Number: JE-1296-1
Job Location: Fort Worth, TX
Rate: 38/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Engineer

Description:
Our client is looking for an MRB Engineer to work in Savannah, GA! Apply today with your most recent resume and if you meet the qualifications a recruiter will be in contact with you!

The ideal candidate for this position will perform the following tasks:
* Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
* Is consulted extensively by associates and others as a recognized authority within the field
* Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
* Approach to problem solving balances technical product, cost and schedule
* Works without appreciable direction; work is reviewed from a long-range perspective for desired results
* Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
* Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product

Mandatory Qualifications and Experience:
* Bachelors degree in Aerospace or Mechanical Engineering.
* Minimum 10 years dedicated Structures MRB Engineering experience at a recognized Aerospace Manufacturer.
* Experience should include creation and justification of engineering dispositions for nonconformances of composite and metallic, pressurized and non-pressurized aircraft structures.
* Experience should include all components of the aircraft (Wing, Fuselage, Empennage).
* Experience should be in a Production and/or schedule-driven environment.
* Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
* Strong written/verbal communication and interpersonal skills.
* Must be computer literate (such as, but not limited to: Catia V5, Solumina, SmarTeam, Word, Excel)
* Initially 1st shift. Occasional 2nd shift and weekend shift support may be required.

Desired Qualifications and Experience:
* Advanced degree in engineering, or related curriculum preferred.

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 130183
Job Location: Savannah, GA
Duration: 1 year
Start Date: 05/06/2019
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Michael Coleman
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Engineer (9 positions left, Tulsa, OK)

Description:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Experience/Education
• Bachelor’s degree in aerospace or mechanical engineering.

Unique skills/Experience
• Minimum 7 years dedicated structures MRB Engineering experience at a recognized aerospace manufacturer.
• Experience should include creation and justification of engineering dispositions for nonconformances of composite and metallic, pressurized and non-pressurized aircraft structures.
• Composite experience should include fiberglass, carbon/epoxy, laminate/sandwich assemblies.
• Familiarity with results of composite NDI/NDT methods required.
• Experience should be in a Production and/or schedule-driven environment.
• Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
• Strong written/verbal communication and interpersonal skills.
• Must be computer literate (such as, but not limited to: Catia V5, SAP, Solumina, Smarteam, Word, Excel)
• Typically a 40 hr work week, with some week/weekend OT a possibility.

Essential Functions
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Acts as liaison with representatives outside of the assigned group/area

aircraft aerospace
 
Job Number: 24-303
Job Location: Tulsa, OK
Rate: $64-$67
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Machine & Tool Designer (Secret Clearance)

Description:

 


Compensation:        



  • OPEN

  • Per Diem is offered for qualified applicants


 


Qualifications:        



  • DoD Secret Clearance required 

  • Design experience using 3D CAD systems (CATIA V5, NX) preferred 

  • NX experience preferred over CATIA V5 

  • Closed form and/or FEA stress analytical capability preferred 


 


Day-to-Day Responsibilities:



  • Project manages internal and external engineering personnel resources to provide production quality rocket motor and aircraft tooling in support of development programs 

  • Concepts and designs special tooling within an Integrated Product Team structure 

  • Manages tooling technical, quality and schedule 

  • Uses and/or manages Computer Aided Design (CAD) resources for tooling design 

  • Works with vendors to ensure successful fabrication of tooling 

  • Witnesses source inspection of special tooling at fabrication locations 

  • Proofs tooling upon receipt 

  • Maintains tooling documentation related to design, fabrication and proofing 

  • Provides tooling estimates for new tools 


 


Work Status Required:        



  • ACTIVE Secret Clearance Required


 


Job Type:        



  • W2 Contract


 


Duration:        



  • 1 Year+, with opportunity for extension and/or conversion to direct employee at any point after 3 months of employment


 


Openings:        



  • 2


 


About USPRO        



  • USPRO, a contract staffing agency located in Boston, MA, is a woman-owned and operated small business USPRO has built a solid reputation as a top provider of temporary and permanent hiring solutions in the aerospace/defense, healthcare and manufacturing industry. If you would like to know more please visit our website at www.uspro.net


 


About Our Client        



  • USPRO's client, builds and delivers space, defense and aviation-related systems to customers around the world. Our main products include launch vehicles and related propulsion systems; missile products, subsystems and defense electronics; precision weapons, armament systems and ammunition; satellites and associated space components and services; and advanced aerospace structures. 


 
Job Number: NG8752572
Job Location: Clearfield, UT
Rate: OPEN
Per Diem: Split
Overtime: Yes
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESC STAFFING
Attention: Brad McInnis
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Maintenance Engineer

Description:
Currently looking for an experienced Maintenance Engineer to fill an opening with a company located in Seattle, WA. Interested candidates should have a Bachelor of Science or higher from ABET-accredited school or be a former licensed A/P mechanic who has extensive experience working in an engineering environment with maintenance or operations engineers.

Responsibilities of the Maintenance Engineer
Adapts a maintenance program generated by MSG-3 to flight test fleet, by analyzing changing aircraft configurations and ongoing operational data.
Coordinating across multiple sites and engineering departments at OEM.


Requirements
BS or higher degree from ABET-accredited school preferred, or former licensed A/P mechanic who has extensive experience working in an engineering environment with maintenance or operations engineers.
Background in maintenance or operations of Part 25 airplanes with an OEM or for a Part 91/121/135 operator.
Any direct experience of certification flight testing to Part 25 would be a plus.
Familiarity with MSG-3 analysis.
Hangar/Ramp and Flight test experience preferred.
 
Job Location: Seattle, WA
Per Diem: Possible
Overtime: Yes
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Adnan Salaka
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $52.50/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
Candidates must have experience with Catia V5. Experience with Solumina and SAP is preferred. Candidates must possess proven knowledge of aircraft systems and structural assemblies/installations.

Other Requirements:
1. Proven knowledge of Lean and/or Six Sigma principles.
2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
4. Lean Six Sigma Greenbelt Certification or higher preferred.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.
 
Job Number: 10122
Job Location: Savannah, GA
Rate: $52.50/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mass Properties Engineer

Description:
• Minimum of 10 years of Mass Properties Experience.
• Minimum of a Bachelors degree.
• Strong weight control skills including influencing, accounting, reporting, measuring, risk and opportunity identification for structure and systems.
• Proficient in weight calculation from engineering drawings
• Perform mass properties analysis for production aircraft or production aircraft
 
Job Number: 42-016
Job Location: Reno, NV
Rate: DOE, but very competitve
Per Diem: YES
Overtime: Possible
Duration: 1 year+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mass Properties Engineer

Description:
The successful candidate shall have experience with Weight and Balance for outfitting of an airplane. Candidate shall have knowledge of the applicable regulations governing weight and balance operations. Experience working within an ODA environment a plus. Experience working with sales a plus. Candidate must have excellent written and verbal skills.

Responsibilities
• Perform mass properties analysis for production aircraft or production aircraft modified for Special Mission applications.
• Update a mass properties accounting database with detail part weight, center of gravity, and inertias.
• Perform actual weight and balance measurement of detail parts, assemblies and full aircraft.
• Prepare aircraft weight & balance documentation for flight and delivery (W&B Handbook, empty weight, W&B for flight, equipment list)
• Track and status structural or system weight versus target weights.
• Promote weight reduction opportunities to the responsible structural designers, system designers or stress engineers.
• Provide and report to management on Aircraft Weight and Balance status
• Coordinate activities to insure weight targets/goals are met

Experience Requirement
• Minimum 5 years aircraft mass properties experience in product development environment.
• Strong weight control skills including influencing, accounting, reporting, measuring, risk and opportunity identification for structure and systems.
• Proficient in weight calculation from engineering drawings and Catia v4/v5 models.
• Experienced in database maintenance.
• Familiarity with Gulfstream products and design processes desired.
 
Job Number: 24-326
Job Location: Savannah, GA
Rate: $65
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mass Properties Engineer

Description:
Location: Savannah, GA
Rate: $65.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
- Minimum 5 years aircraft mass properties experience in product development environment.
- Strong weight control skills including influencing, accounting, reporting, measuring, risk and opportunity identification for structure and systems.
- Proficient in weight calculation from engineering drawings and Catia v4/v5 models.
- Experienced in database maintenance.
- Familiarity with Gulfstream products and design processes desired.

Education:
- Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
- See Other Requirements in Job Description.
- 5 years in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
- Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Job Description:
- Perform mass properties analysis for production aircraft or production aircraft modified for Special Mission applications.
- Update a mass properties accounting database with detail part weight, center of gravity, and inertias.
- Perform actual weight and balance measurement of detail parts, assemblies and full aircraft.
- Prepare aircraft weight & balance documentation for flight and delivery (W&B Handbook, empty weight, W&B for flight, equipment list)
- Track and status structural or system weight versus target weights.
- Promote weight reduction opportunities to the responsible structural designers, system designers or stress engineers.
- Provide and report to management on Aircraft Weight and Balance status
- Coordinate activities to insure weight targets/goals are met

What you'll bring to the team:
- Apply your education as an Aeronautical, Aerospace, Electrical, Systems, or Mechanical engineer to provide quality mass properties analysis.
- Apply people skills to provide optimum lightweight design concepts while working with design team.
- Experience with CATIA and SmarTeam is preferred.
 
Job Number: 10462
Job Location: Savannah, GA
Rate: $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Master Technical Training Instructor

Description:
Location: Savannah, GA
Rate: $39.00 - $43.00/HR
Duration: Long Term Contract
Shift: 4x10
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
1. Aircraft manufacturing and Repair Station knowledge and or experience required.
2. Sheet metal and structures experience required.
3. Looking for candidates with classroom and hands-on experience. Example: hands-on experience with structures, sheetmetal, riveting, etc.
4. Company Aircraft knowledge preferred.

Education and Experience Requirements:
1. Bachelor's degree preferred or equivalent combination of education and experience.
2. Five to eight years experience in aviation industry, including relative Company experience.
3. Three to five years experience in training related area.
4. See Other Requirements in Job Description.

Position Purpose:
1. Under minimum supervision, research, assist in the development, organize and deliver training curriculum.
2. Act as an internal consultant on training issues in areas of expertise.
3. Support training as assigned at all company and Flight Safety facilities.
4. Support Lead Training Instructors and mentor other training instructors as required.

Principal Duties and Responsibilities:
Essential Functions:
1. Conduct classroom and practical training as requested at all company and Flight Safety facilities. Training may include certification training for engine/APU qualifications, Aircraft Recurrent/Refresher Training, Familiarization Training, and System Line Maintenance Training on assigned aircraft or on assigned systems for employees and customers.
2. Identify, research, and verify technical accuracy of information required for training course development. Monitor all applicable information sources to determine required changes to current training programs.
3. Oversee the development of new or updated training programs. Report progress to lead instructor. Interface with engineering and other cognizant personnel while using engineering material/technical data (block diagrams, blueprints, test specifications, and reports) to determine training content. Working with other instructors, guide the projects/subjects that they are working on to make sure any training development project meets established milestones. Ensure established standards are upheld.
4. Work with lead instructor to determine training needs and help determine the best approach to provide required training to the work-force and our customers (classroom, hands-on, CBT).
5. Prepare all necessary training materials (course outlines, lesson plans, books, handouts, presentations, CBTs) needed to meet training objectives while maintaining established departmental, company, and training provider standards.
6. As assigned, maintain technical expertise on existing Company products and acquire knowledge on new product designs from available sources, i.e. Engineering, Tech Ops, Pubs, etc.
7. As assigned, obtain and maintain qualification to instruct in at least three subject areas (system, area or subject) and any associated simulator requirements.
8. Schedule Aircraft Equipment resources as required for Practical Training.
9. Prepare and coordinate technical data and training information as required for use in off-site training/seminar sessions.
10. Develop and maintain Computer Based Training.
11. Solicit, promote, and exhibit a spirit of teamwork between Company and Flight Safety.

Additional Functions:
1. Mentor Training Instructors as required and provide assistance in the development of their skills and abilities.
2. Promote and ensure a safe training environment.
3. Update training programs/records accordingly.
4. Travel as necessary to conduct training.
5. Performing other duties as required and/or assigned.

Other Requirements:
1. A&P, FCC, or Pilot License preferred.
2. Instructor development training is required.
3. If the instructor will be a member of the Company/Flight Safety Total Technical Training program, an FSI Master Technician Certification required.
4. Expert user of PowerPoint, MSWord, and Lotus Notes.
5. Ability to utilize media equipment.
6. Ability to read/interpret blueprints and wiring diagrams.
7. Ability to solve the problems between peers and subordinates.
8. Must exhibit excellent verbal, written, and teaching skills.
 
Job Number: 10592
Job Location: Savannah, GA
Rate: $39.00 - $43.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Material & Processes Engineering Manager

Description:
Plans, directs and coordinates activities of a product engineering department to design, integrate, analyze, manufacture, test and certify aircraft components, products, and systems; develops and maintains cost effective production methods, tooling, standards and procedures for company products and processes; supports or initiates continuous process improvement programs and reporting. Develops and provides leadership to institutionalize the processes of Continuous Quality Improvement in accordance with organizational goals and objectives.
Essential Functions and Key Responsibilities:
• Must have a background with Material & Process within the aircraft industry
• Responsible for material and process systems and testing
• Manages and develops plans, schedules and engineering methods for existing product lines, development of new products and/or projects. Establishes operating policies and procedures, interprets, executes and recommends modifications to technical and administrative organizational policies.
• Develops or directs the development of initial design concepts to support new product development and customer needs. Directs department activities in designing new products, modifying existing designs, improving production techniques and developing test procedures to ensure newly developed product tooling, processes and materials can be adapted to production environment; design and installation of new equipment or equipment upgrades.
• Analyzes technology trends, human resource needs, and market demand to plan projects. Transfer new technology concepts into new product innovations and existing product line modifications. Resolves or directs the resolution of engineering design or product operational problems.
• Coordinates with Manufacturing, Marketing, Contracts and Quality Assurance and other groups to ensure required engineering documentation is established and maintained for each project.
• Confers with management, production, and marketing staff to determine engineering feasibility, cost effectiveness and customer demand for new and/or existing products.
• Creates and maintains budget and schedule tracking metrics and reports progress to Engineering management. Supervises and evaluates the performance of engineering staff. Forecasts department operating costs and directs preparation of budget requests.
• Provides guidance to teams on development, performance and productivity issues.

BENEFITS:
Annual bonus
Medical
401K
Relocation



The Structures Company is an AA/EOE.
 
Job Number: 295
Job Location: OK
Rate: SALARY - OPEN
Duration: DIRECT POSITION
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Materials and Process Engineer

Description:
Location: Savannah, GA
Rate: $55.00/HR
Duration: Long Term Contract

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
- Experience of working in a team environment to identify substantiating rationale for selecting materials and processes that become part of engineering models.
- Successful history of generating work authorizing instructions, test plans/reports and specifications.
- Ability to communicate with stakeholders and document accurate and timely project updates.
- Understand FAA regulations and certification processes.
- Special Missions - Highly prefer: KSA in Non-Metal Sealants and Coatings, Composites and Materials Processing.

Education and Experience Requirements:
Bachelor's degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principal Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 10372
Job Location: Savannah, GA
Rate: $55.00/HR
Per Diem: Split Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Materials and Processes Engineer

Description:
• Build and Lead all parts of Materials and Processes organization for the aircraft development.
• Lead development of the material and process specifications through collaboration with OEM, suppliers and vendors to guide program in selecting appropriate materials by drawing from civil, military and/or industry standards.
• Strong knowledge of aerospace composites and metallic materials, advanced manufacturing processes, test methods and design allowable development.
• Knowledge of aircraft flammability and structural bonding requirements for Part 25 certification.
• Provide advice on the applications, properties and processing of advanced material systems to all stakeholders - including, but not limited to, stress, design, customer support, quality and procurement.
• Perform trade studies, write proposals and support new business development plans.

Requirements:
• Must be either a US citizen, a US permanent resident (a “US Person”) or a Canadian citizen.
• Minimum Bachelor’s Degree in Engineering. Master’s Degree strongly preferred.
• 15+ years of hands-on experience in advanced materials and processes qualifications, testing, manufacturing and certification of Part 25 aircraft
• 5+ years of experience leading technical resources and team.
• In-depth and current knowledge of Part 25 regulatory requirements.
• Demonstrated success in dealing and influencing internal and external stakeholders.
• Experience in engineering support of aircraft production line activities is desirable.
 
Job Number: 42-014
Job Location: Reno, NV
Rate: DOE but very competitive
Per Diem: YES
Overtime: YES
Duration: 1 year+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design - Doors and Mechanisms

Description:
Minimum 8 years Mechanical Design experience with mechanisms and articulating doors - Thorough understanding of Auxiliary Mechanisms and Doors as well as Structures design criteria including design loads and durability (fatigue and corrosion)
Solid understanding of design and manufacturing processes involved for both metallic and composite parts with a focus on design for manufacturing and assembly (DFMA)
Solid understanding of 3D Model Based Definition (3D MBD), and the application of Geometric Dimensioning and Tolerancing (GD&T) for details and assemblies as well as tolerance stack-up analysis and GD&T as it applies to the Door systems
Minimum 10,000 hours or 5 years’ experience on CATIA v5 in Auxiliary Mechanisms and Doors Design, Kinematics workbench proficiency required

Preferred candidates will also have:
Proficiency in CATIA v5 workbenches: part design (machined parts), sheet metal, Composite Part Design (CPD), FT&A, Knowledge Based Engineering (KBE) tools including use of parameters, design tables, and Visual Basic macros Proficiency in SmarTeam PLM database - Experience with FAA/ODA certification and component testing
MRB experience with Hydraulics, Landing Gear, and Doors
Hands-on experience with aircraft production support
Prior work experience with Gulfstream aircraft design - Experience with knowledge management processes

Responsibilities include:
Develop structural and mechanical systems definition of the aircraft by producing the form, fit, and function documentation from conceptual layouts to final detail design
Engage various engineering, manufacturing, and product support teams to complete designs
Participate in design reviews - Interact with suppliers and prepare technical coordination memos
Prepare engineering reports - Document, track, and manage design projects of various magnitude using online knowledge bases and tracking tools
Provide technical leadership and mentoring to junior engineers

Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
 
Job Number: 19-143609
Job Location: GA
Rate: 70.00
Per Diem: Split
Overtime: Possible
Duration: Year +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Location: Savannah, GA
Rate: $55.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
- Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions Engineering.
- Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
- Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
- Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
- Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
- Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
- Design Engineer will be required to liaison with the shop on engineering issues.

Design assignments include but are not limited to:
- Item Installation Analysis
- Similarity Analysis
- Configuration Analysis Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred
The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 10772
Job Location: Savannah, GA
Rate: $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Interior Design Engineer

Description:
Unique Skills:
• Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions.
• Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
• Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
• Design engineer will design installations for aforementioned commodities along with necessary air frame modifications to meet load requirements of the interior installation and should have competency with Weight & Center of Gravity Analysis.
• Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
• Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
• Design Engineer will be required to liaison with the shop on engineering issues.
• Design assignments include but are not limited to: -Item Installation Analysis -Similarity Analysis -Configuration Analysis.
• Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.
 
Job Number: 24-360
Job Location: Savannah, GA
Rate: $55/hr.
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Location: Savannah, GA
Rate: $58.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
- Mechanical Design in Aircraft Cabin Interiors, CATIA, Smarteam, AutoCAD, Microsoft Project, Excel and Power Point.
- Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
- Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
- Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
- Knowledgeable with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
- Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
- Design Engineer will be required to liaison with the shop on engineering issues.
- Design assignments Item Installation Analysis, Similarity Analysis and Mount Configuration along with any other required items.
- Design engineer will employ design standards consistent with company standards and accepted design methods are executed under the direction of the Mechanical Engineering Group Head to meet the manufacturing schedule.
- Additional responsibilities are out lined in the job description and as assigned by the Mechanical Engineering Group Head.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

Principle Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
2. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 10435
Job Location: Savannah, GA
Rate: $58.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Location: Savannah, GA
Rate: $58.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
- Mechanical Design in Aircraft Cabin Interiors, CATIA, Smarteam, AutoCAD, Microsoft Project, Excel and Power Point.
- Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
- Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
- Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
- Knowledgeable with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
- Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
- Design Engineer will be required to liaison with the shop on engineering issues.
- Design assignments Item Installation Analysis, Similarity Analysis and Mount Configuration along with any other required items.
- Design engineer will employ design standards consistent with company standards and accepted design methods are executed under the direction of the Mechanical Engineering Group Head to meet the manufacturing schedule.
- Additional responsibilities are out lined in the job description and as assigned by the Mechanical Engineering Group Head.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

Principle Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
2. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 10603
Job Location: Savannah, GA
Rate: $58.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Location: Savannah, GA
Rate: $70.00 - $80.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
1. Knowledge of Flight Test Instrumentation Mechanical Design is required.
2. Working knowledge of CATIA V5 and SmarTeam is required.

Education and Experience Requirements:
1. Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
1. Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

Principle Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
2. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 10573
Job Location: Savannah, GA
Rate: $70.00 - $80.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Location: Savannah, GA
Rate: $70.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Qualified candidates will have:
- Minimum 8 years Mechanical Design experience with mechanisms and articulating doors
- Thorough understanding of Auxiliary Mechanisms and Doors as well as Structures design criteria including design loads and durability (fatigue and corrosion)
- Solid understanding of design and manufacturing processes involved for both metallic and composite parts with a focus on design for manufacturing and assembly (DFMA)
- Solid understanding of 3D Model Based Definition (3D MBD), and the application of Geometric Dimensioning and Tolerancing (GD&T) for details and assemblies as well as tolerance stack-up analysis and GD&T as it applies to the Door systems
- Minimum 10,000 hours or 5 years experience on CATIA v5 in Auxiliary Mechanisms and Doors Design, Kinematics workbench proficiency required

Preferred candidates will also have:
- Proficiency in CATIA v5 workbenches: part design (machined parts), sheet metal, Composite Part Design (CPD), FT&A, Knowledge Based Engineering (KBE) tools including use of parameters, design tables, and Visual Basic macros
- Proficiency in SmarTeam PLM database
- Experience with FAA/ODA certification and component testing
- MRB experience with Hydraulics, Landing Gear, and Doors
- Hands-on experience with aircraft production support
- Prior work experience with company aircraft design
- Experience with knowledge management processes

Competencies essential for the job:
- Strong interpersonal skills and ability to work in a team environment and across disciplines
- Ability to communicate technical findings and recommendations clearly
- Humility, be a team player, help teammates
- Passion for Auxiliary Mechanisms and Doors Design work

Responsibilities include:
- Develop structural and mechanical systems definition of the aircraft by producing the form, fit, and function documentation from conceptual layouts to final detail design
- Engage various engineering, manufacturing, and product support teams to complete designs
- Participate in design reviews
- Interact with suppliers and prepare technical coordination memos
- Prepare engineering reports
- Document, track, and manage design projects of various magnitude using online knowledge bases and tracking tools
- Provide technical leadership and mentoring to junior engineers

Education:
Bachelor's degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 years in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job
 
Job Number: 10571
Job Location: Savannah, GA
Rate: $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer-Interiors

Description:
Mechanical Design Engineer-Interiors
Savannah, GA
Rate: $55

4X10

Unique Skills:

Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions. Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations. -Design engineer will design installations for aforementioned commodities along with necessary air frame modifications to meet load requirements of the interior installation and should have competency with Weight & Center of Gravity Analysis. -Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements. -Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam. -Design Engineer will be required to liaison with the shop on engineering issues. Design assignments include but are not limited to: -Item Installation Analysis -Similarity Analysis -Configuration Analysis Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.
 
Job Number: 10763
Job Location: Savannah, GA
Rate: $55
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Designers.

Description:
Our client is looking for a few CATIA V5 designers to design and integrate aircraft mechanical systems. Looking for people who have experience with Aircraft interiors, modifications, re-configurations, upgrades Galley, bulkheads, sideledges, PSUs, credenzas, cabin-dividers
Understanding of stress loads
 
Job Location: Wilmington, DE
Rate: $50-$55
Per Diem: Yes, Split
Overtime: Possible
Duration: Open Ended
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AMERICAN CONTRACT GROUP
Attention: Derek Doucette
Address: 50 HIGH ST STE 46
City, State: NORTH ANDOVER, MA 01845
Phone: 978/984-5581
800 Phone: 877/723-9087
Fax Phone: 978/208-8246
Website: www.americancontractgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Designers.

Description:
Our client is looking for a few CATIA V5 designers to design and integrate aircraft mechanical systems. Looking for people who have experience with Aircraft interiors, modifications, re-configurations, upgrades Galley, bulkheads, sideledges, PSUs, credenzas, cabin-dividers
Understanding of stress loads
 
Job Location: Little Rock, AR
Rate: $50-$55
Per Diem: Yes, Split
Overtime: Possible
Duration: Open Ended
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AMERICAN CONTRACT GROUP
Attention: Derek Doucette
Address: 50 HIGH ST STE 46
City, State: NORTH ANDOVER, MA 01845
Phone: 978/984-5581
800 Phone: 877/723-9087
Fax Phone: 978/208-8246
Website: www.americancontractgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
Our client is looking for a Mechanical Engineer to work in Broken Arrow, OK! Apply today with your most recent resume and if you meet the qualifications a recruiter will be in contact with you!

The ideal candidate for this position will perform the following tasks:
* Responsibilities include development of 3D models, detailed drawings and interfacing with manufacturing.

Mandatory Qualifications and Experience:
* Must have an active Secret Clearance walking in door
* BS in Mechanical Engineering or equivalent experience in an engineering discipline
* Experience developing 3D models and detailed drawings
* Ability to develop innovative solutions
* Strong SolidWorks experience required

Desired Qualifications and Experience:
* Prefer 4+ years of directly related experience
* Experience with AutoCAD
* Finite Element Analysis application experience
* Familiarity with aircraft cockpit systems
* Simulation equipment experience

The ideal candidate for this position will possess the following skills and characteristics:
* Must have strong verbal and written communication skills

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 130161
Job Location: Broken Arrow, OK
Duration: 6 months
Start Date: 04/15/2019
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical System Design Engineer

Description:
• Perform preliminary and detail design of aircraft mechanical systems, including flight controls, landing gear and ECS systems.
• Create 3D/2D definition.
• CATIA V5 is a plus.
• Participate in the Engineering definition review, approval and release process
• Support the review of manufacturing plans and procedures to ensure compliance with design requirements
• Support the creation of structural test plans which will be used to verify manufacturing processes meet design intent and requirements.
• Ability/Interest interacting with the shop floor.

The Structures Company is an AA/EOE.
 
Job Number: 264
Job Location: CA
Per Diem: Yes
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Engineer - Landing Gear

Description:
Seeking a Mechanical Systems Engineer with landing gear background

Must have experience with:
• Must have clean sheet design experience
• System analysis – perform pressure drop analysis, among other analysis.
• System testing required for PDR.
• Integration of entire system into aircraft for PDR.
• Create detailed models.
• Spec out system parts.
• Coordinate/support manufacturing
• FAR Part 23 experience is a huge plus
• Must have a BS degree (BSAE, BSME)

The Structures Company is an AA/EOE.
 
Job Number: 281
Job Location: VA
Rate: $75-$85/Hr.
Per Diem: Yes
Duration: 3-6+ Months - Possibly Longer
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Technician ( Gilbert, AZ ) TS8970180

Description:
Mechanical Technician ( Gilbert, AZ ) TS8970180
12 Month Contract

Pay rate: $40/hr , maybe more for the right candidate

** Active Top Secret Clearance required

**Key skills will be mechanical skills (installing delicate hardware,) leadership skills, and ability to drive projects to completion. Experience on resume should be relevant to the position. Aviation, aircraft, military experience helpful, and should be represented on resume. Work will perform critical handling of delicate electro/mechanical hardware.
During interview manager will explore leadership skills and mechanical skills as it relates to candidates experience. If experience is in heavy machinery, or composite/structural, this will not apply.

Hardware is more delicate, so that exp is more in line w/ nature of the work. Will need computer skills as are now on a paperless system.
Work as a mechanical technician on all aspects of mechanical build and processing of satellites. The candidate will acquire necessary skills on-the-job under the tutelage of senior technicians and engineers. Support mechanical leads and senior engineers on the installation of extremely fragile space hardware such as avionic boxes, cables, and waveguide. Support and maintain work areas up to company ESD, FOD and 5S standards. Should be willing to work off shift hours, weekends, and/or overtime as needed in order to maintain production schedule.

- Hands-on knowledge and experience with the use of a variety of tools and mechanical equipment. - Knowledge of basic Excel, Word, Powerpoint, general computer handling, and Tool Control required. - Ability and initiative to tackle and understand new technical and engineering designs. - Ability to read and interpret mechanical assembly drawings and BOM's. - Ability to demonstrate general technical knowledge in manufacturing including interpreting complex engineering drawings, schematics, and diagrams. - Ability to identify issues, escalate to appropriate channels, and implement solutions after engineering review to routine process problems of limited scope. - Ability to work with diverse team, take constructive feedback from senior technicians, engineers and QA support personnel. - Experience with working inside Clean Rooms, The candidate must be a U.S Citizen and shall possess technical training equivalent to an Associate Degree and at least five 5 years of related experience as a mechanical technician
 
Job Number: TS8970180
Job Location: Gilbert, AZ
Rate: 40
Per Diem: no
Overtime: yes
Duration: 12 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Metrology Specialist

Description:
Metrology Specialist with experience in setup, build, and inspection of large tools and assembly structures. This role is for a hands-on person with great versatility with regard to building and assembling large precision structures. The first task of this role will be to execute the installation and setup of new production fixtures, tooling, and equipment in a new production facility. The specialist in this position will support the production tooling and equipment design and installation in order to create an efficient, organized, and lean factory. After production operations begin, the Metrology Specialist will work closely with production personnel to maintain equipment and tooling and contribute to process improvement using lean processes and tools. Metrology Specialists will also help with the large scale aircraft assembly steps and inspection.

Key Components of position
• Hands‐on Tooling assembly
• Large structure handling: driving a forklift, scissor lift, boom lift, etc. operating a crane or hoist, installing concrete mounting points in floor, accurately locating large or heavy structure to within .005” accuracy.
• Must be able to lift 50 lbs.
• Utilizing CAD or 3D software for inspection (one or more of the following):
o PC Demus, Verisurf, Geomagic, Polyworks, Spacial Analyser, or similar
• Metrology
• Working with laser trackers or similar positioning systems

Professional requirements for position
• Hands on experience in setup of large scale precision fixtures or tooling
• Excellent Organizational Skills and problem-solving skills
• Excellent computer skills (CAD and/or 3D software packages) as well as standard Microsoft products
• Strong team player
• Experience with large aircraft assembly and inspection a plus Metal shop skills (welding, grinding, machining, etc) a plus
• Must be able to take direction well and is a strong team player.
• Extreme attention to detail and continual pursuit of perfection.
• Excellent listening and communication skills.
• Ability to maintain composure in high pressure situations
• Excellent organizational skills and problem-solving skills.
Physical Requirements
• Must be able to stand for extended periods – 8 hours min.
• Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces.
• Physically able to handle items weighing up to 40lbs (unassisted).
• Working in confined spaces
• Working on Elevated Platforms

The Structures Company LLC is an AA/EOE.
 
Job Number: 507
Job Location: Mojave, CA
Rate: $60-$85/Hr. **DOE**
Per Diem: Yes
Overtime: Possible
Duration: Long Term
Start Date: ASAP
Input Date: 06/14/2022
Last Updated: 07/22/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
PLM Configuration Analyst II

Description:
Location: Savannah, GA
Rate: $40.00 - $50.00/HR
Duration: Long Term Contract
Shift: First
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
- Problem Resolution Opportunities: Strong interpersonal, organizational, communications, requirements analysis, technical writing and problem-solving skills are required.
- Strong customer relationship management skills.

Experience Requirements:
- Proficiency in CAD modeling utilizing CATIA V5 with emphasis on structural or mechanical design

Essential Job Functions:
- PLM apps user support with primary focus on CATIA V5 users
- Provide solutions to end user identified technical problems in support of the PLM environment.
- Support the development and execution of business test scenarios to validate PLM system updates.

Education and Experience Requirements:
- Bachelor's Degree in Engineering, Computer Science or a related curriculum required or an equivalent combination of appropriate education and experience sufficient to successfully perform the essential functions of the job.
- 3 years of engineering or IT experience.
- 1 year experience with CAD and/or PDM tools (CATIA and ENOVIA SMARTEAM preferred.)
- 1 year Database experience, data migration/conversion or related experience preferred..

Position Purpose:
- Under minimal supervision, perform engineering work related to configuring, deploying, maintaining, and upgrading CAD and Product Lifecycle Management (PLM) applications and processes.
- Responsible for tasks related to the development and deployment of systems, methodologies, standards and processes that result in the ability to create and manage high fidelity digital data for company products.
- Perform tasks to ensure PLM systems integrity and manage all product configuration data and information throughout the products lifecycle.
- Provide support for the development of training courses for CAD and PLM Applications.

Principle Duties and Responsibilities:
Essential Functions:
1. Execute plans, according to schedules, for engineering assignments.
2. Responsible for engineering feasibility of CAD and PLM solutions for complex assignments or full project of minor complexity.
3. Coordinate activities for lower level engineering staff assigned to specific projects.
4. Actively work to improve daily processes, to ensure all CAD and PLM systems meet customer requirements.
5. Analyze user needs to determine engineering and product data requirements, CAD and PLM functional requirements, and perform analysis as well as process and data modeling to meet user needs.
6. Recognize discrepancies and/or problems with analysis, process mapping or system implementation results and work toward corrective action.
7. Tailor CAD and PLM applications functionality, to established requirements, policies and procedures.
8. Develop system queries and utilities to support user's information researches
9. Assist in the testing and implementation of new deployment or revisions to the CAD and PLM systems.
10. Execute tasks for producing Product Structure and Engineering Bill of Material for use in production and QA.
11. Execute tasks for coordinating the release of product definition data, change management and product configuration management, including quality control and change reporting.
12. Ensure proper security, archiving and audibility of product releases.
13. Analyze, monitor and report business and system status metrics.

Additional Functions:
1. Provide training on new functionalities and upgrades.
2. Ensure compliance with FAA regulatory requirements for management and control of all type design data.
3. Maintain a current and up-to-date knowledge of developments in a specific discipline and/or other related aircraft fields in order to recommend innovations to improve the quality, economy, and effectiveness of the company product.
4. Perform other duties as assigned.

Other Requirements:
1. Experience with CAD and PDM tools (CATIA and ENOVIA LCA, VPM preferred).
2. Previous experience with digital pre-assembly of product components (aerospace preferred).
3. Experience in process mapping and other process improvement techniques preferred.
4. Familiarity with computer-aided design, manufacturing and product data management systems.
5. Basic knowledge of design engineering and manufacturing engineering applications and processes.
6. Proven computer literacy that includes PC Windows's environment with specific skills in MS Access, Excel, PowerPoint, Word, Visio and MS Project.
7. Must have strong interpersonal skills, self motivated, and a general understanding of engineering/manufacturing data requirements and design tools.
 
Job Number: 10695
Job Location: Savannah, GA
Rate: $40.00 - $50.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
PLM Configuration Analyst III

Description:
Location: Savannah, GA
Rate: $44.43 - $49.36/HR
Duration: Long Term Contract
Shift: First
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
1. Experience developing EKL, KBE, Knowledge Patterns, UDF and Product Document Templates with CATIA V5 required.
2. Experience with VB, VB.NET and CAA for CATIA V5 preferred.
3. Experience developing EKL with 3DExperience / CATIA V6 preferred.

Education and Experience Requirements:
1. Bachelor's Degree in Engineering, Computer Science or a related curriculum required or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Six (6) years of engineering or IT experience required.
3. Three (3) years of experience with CAD and/or PDM tools required. (CATIA and ENOVIA SMARTEAM preferred).
4. 3 years of Database experience, data migration/conversion or related experience preferred.

Position Purpose:
1. Perform engineering work related to configuring, deploying, maintaining, and upgrading CAD and Product Lifecycle Management (PLM) applications and processes.
2. Responsible for tasks related to the development and deployment of systems, methodologies, standards and processes that result in the ability to create and manage high fidelity digital data for Company products.
3. Independently perform tasks defined in the project plan to ensure PLM systems integrity and manage all product configuration data and information throughout the product's lifecycle.
4. Determine user needs and define technical contents for the development of training courses for CAD and PLM Applications.
5. Direct team members on a daily basis regarding requirements, solutions and implementation strategy.

Principle Duties and Responsibilities:
Essential Functions:
1. Create plans according to schedules, for engineering assignments, and act independently to carry them out.
2. Responsible for engineering feasibility of CAD and PLM solutions for complex assignments or full project of minor complexity.
3. Direct activities for lower level engineering staff assigned to specific projects.
4. Interpret user needs to determine engineering and product data requirements, CAD and PLM functional requirements, perform analysis and create action plans to implement process and data modeling to meet user needs.
5. Tailor CAD and PLM applications functionality, to established requirements, policies and procedures.
6. Determine user needs and utilize system queries and utilities to support users information research.
7. Direct the testing and implementation of new deployment or revisions to the CAD and PLM systems.
8. Design and develop business reports and system status metrics.

Additional Functions:
1. Provide training on new functionalities and upgrades.
2. Ensure compliance with FAA regulatory requirements for management and control of all type design data.
3. Maintain a current and up-to-date knowledge of developments in a specific discipline and/or other related aircraft fields in order to recommend innovations to improve the quality, economy, and effectiveness of the company product.
4. Perform other duties as assigned.

Other Requirements:
1. Experience with CAD and PDM tools (CATIA and ENOVIA LCA, VPM preferred).
2. Previous experience with digital pre-assembly of product components (aerospace preferred).
3. Experience in process mapping and other process improvement techniques preferred.
4. Familiarity with computer-aided design, manufacturing and product data management systems.
5. Basic knowledge of design engineering and manufacturing engineering applications and processes.
6. Proven computer literacy that includes PC Windows environment with specific skills in MS Access, Excel, PowerPoint, Word, Visio and MS Project.
7. Must have strong interpersonal skills, self motivated, and a general understanding of engineering/manufacturing data requirements and design tools.
 
Job Number: 10771
Job Location: Savannah, GA
Rate: $44.43 - $49.36/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Powerplant ECS & Cooling Systems Engineer

Description:
Location: Savannah, GA
Rate: $63.00/HR
Duration: Long Term Contract

****MUST be a U.S. Citizen or Permanent Resident****

Candidate should have experience with:
- Aircraft environmental control systems
- Specialized onboard equipment cooling systems, including: Liquid cooling systems, Air cycle systems, and Vapor cycle systems
- Cooling system performance analysis
- Heat exchanger design and analysis
- Component qualification and certification test
- System test and certification
- Part 25 and DO-160
- Supplier coordination

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 10376
Job Location: Savannah, GA
Rate: $63.00/HR
Per Diem: Split Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Powerplant, ECS & Fuel Systems Engineer

Description:
Location: Savannah, GA
Rate: $75.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
1. Applicant needs knowledge / expertise in Part 25 certification of Powerplant Systems.
2. Systems include Inlets, Cowls, Doors, TR and the engine.
3. Areas can include Requirements V&V (ARP4754A), Fire Protection, Flammable Fluid Drainage, Cooling & Ventilation, Pneumatic performance, Fuel Systems, Environmental Control Systems (ECS) and APU operation.
4. Certification includes development of certification plans, qualification plans, qualification test plans, qualification test results, Issue Papers/CRIs, summary of compliance reports (SCRs), EASA validation reports and foreign certification.
5. Experience as a Cognizant Engineer in part or wholly through the development, release and testing of hardware (PDR, CDR and TC configuration) is desired.
6. Analytical experience in the design or performance modeling of Powerplant systems would be a discriminator.
7. Familiarity with 14-CFR Part 23 / 25 regulations would be an advantage.

Education and Experience Requirements:
1. Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Five (5) yrs in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
1. Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principle Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering related field preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 10642
Job Location: Savannah, GA
Rate: $75.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Powerplant, ECS & Fuel Systems Engineer

Description:
Location: Savannah, GA
Rate: $65.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
1. Applicant needs knowledge / expertise in Part 25 certification of Powerplant Systems.
2. Systems include Inlets, Cowls, Doors, TR and the engine.
3. Areas can include Requirements V&V (ARP4754A), Fire Protection, Flammable Fluid Drainage, Cooling & Ventilation, Pneumatic performance, Fuel Systems, Environmental Control Systems (ECS) and APU operation.
4. Certification includes development of certification plans, qualification plans, qualification test plans, qualification test results, Issue Papers/CRIs, summary of compliance reports (SCRs), EASA validation reports and foreign certification.
5. Experience as a Cognizant Engineer in part or wholly through the development, release and testing of hardware (PDR, CDR and TC configuration) is desired.
6. Analytical experience in the design or performance modeling of Powerplant systems would be a discriminator.
7. Familiarity with 14-CFR Part 23 / 25 regulations would be an advantage.

Education and Experience Requirements:
1. Bachelor's Degree Engineering or related curriculum required or equivalent combination of education and experience sufficient to perform the essential functions of the job.
2. 18 months of related Engineering experience.
3. Experience credit will be considered for related advance degrees limited to 2 years for the Master's and 4 years for PhD in field applicable to the job position.

Position Purpose:
1. Performs engineering work related to the investigation and the solution of technical problems associated with research, design, development, service and manufacture of company aircraft.

Principle Duties and Responsibilities:
Essential Functions:
1. Solves typical engineering problems within assigned discipline
2. Provides technical assistance to engineering staff and contributes to completion of project milestones
3. Responsible for a complex engineering assignment, or a full project of lesser complexity
4. Follows established schedules while developing plans for engineering assignments
5. Obtains appropriate level of supervisor approvals for work accuracy and adequacy
6. Proficiently applies company/organization policies and procedures

Additional Functions:
1. Actively works to improve daily processes, and ensures all work meets customer requirements
2. Maintains a current and up-to-date knowledge of developments and application of technical principles, theories, and concepts in assigned field of expertise.
3. Perform other duties as assigned.

Other Requirements:
1. The level of technical skills and abilities appropriate for this grade will be established by each discipline.
2. Applies knowledge to provide solutions to a variety of technical problems of moderate scope and complexity, using a combination of judgment with defined practices and procedures.
3. Failure to achieve results, or erroneous decisions or recommendations, may cause delays in program schedules and/or allocation of additional resources.
4. Ability to convey technical concepts in both written and verbal formats.
5. Contacts are primarily within the organization, with occasional customer contacts on routine issues.
6. Works under general supervision for routine tasks of minor complexity.
7. With supervision/mentorship, can coordinate the activities for lower level engineering staff.
 
Job Number: 10643
Job Location: Savannah, GA
Rate: $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Powerplant, ECS & Fuel Systems Engineer

Description:
Location: Savannah, GA
Rate: $75.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
1. Proficient in Catia V5 and all design workbenches associated with tubing, sheetmetal, surfacing.
2. Proficient in Smarteam and Solumina.
3. Candidate to be a self-starter, able to work multiple tasks concurrently with ability to meet stringent schedule requirements.
4. Very Highly Preferred - 5 years + exp in Fuel, PP, and ECS.

Education and Experience Requirements:
1. Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Five (5) yrs in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
1. Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principle Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering related field preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 10631
Job Location: Savannah, GA
Rate: $75.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Engineer Software 3 - Clearance / URGENT FL

Description:
Principal Engineer Software 3 (Job Number: 19007337)

Number of Openings: 1

Location(s): United States-Florida-Melbourne


Shift: 1st Shift

Target Start Date: Jun 10, 2019

Target End Date: Jun 5, 2020

Requested Hourly Rate: 55.00

Work Schedule: 9/80

Duration of Assignment: Up to 1 year

Candidates NEEDED ASAP

The Software Engineer will develop, modify and maintain customized or standardized applications using software engineering best practices and standards, and participate in the full life-cycle of software development, to include requirements development, modeling and design, application development, unit to CSCI testing, integration, formal system testing, release, installation, and maintenance. Excellent verbal, written and interpersonal skills are required.

The E-2D program is seeking a software engineer to support multiple E-2D programs. Their responsibilities would include:

• Full Lifecycle design, implementation, and unit testing of software
• Work with various sub teams to integrate functionality with other IPTs
• Actively participate in code reviews
• Develop SW products from all phases of SW life cycle.


Basic Qualifications:

Bachelor’s Degree in a Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university and 5 years of software engineering experience OR


Master’s Degree in Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university and 3 years of software engineering experience


Experience developing software / writing code in C/C++ or Ada

Experience with Linux



Preferred Qualifications:

Bachelor’s or Master’s degree in Computer Engineering, Computer Science, or Electrical Engineering


Strong Problem Solving Skills


Experience in Software Test


Familiarity with Atlassian tool suite and tools like git and Confluence


Familiarity with Agile software development process


DOORS


Eclipse or other integrated development environment (IDE)


Knowledge of Linux systems with basic commands


Familiar with aircraft systems/subsystems architectures (i.e., CNI, vehicle, cockpit, …)


Experience with OpenGL
 
Job Number: JK-1748S
Job Location: Melbourne, FL
Rate: 55/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Software Engineer 3 - Clearance FL

Description:
1740 Principal Software Engineer 3 (Job Number: 19006470)

Number of Openings: 1

Location(s): United States-Florida-Melbourne


Shift: 1st Shift

Target Start Date: May 6, 2019

Target End Date: May 1, 2020
Requested Hourly Rate: 50.00

Pay Rate: $50/hr

Work Schedule: 9/80

Duration of Assignment: Up to 1 year


The Software Engineer will develop, modify and maintain customized or standardized applications using software engineering best practices and standards, and participate in the full life-cycle of software development, to include requirements development, modeling and design, application development, unit to CSCI testing, integration, formal system testing, release, installation, and maintenance. Excellent verbal, written and interpersonal skills are required.

The E-2D program is seeking a software engineer to support multiple E-2D programs. Their responsibilities would include:

• Full Lifecycle design, implementation, and unit testing of software

• Work with various sub teams to integrate functionality with other IPTs

• Actively participate in code reviews

• Develop SW products from all phases of SW life cycle.

Basic Qualifications:

Bachelor’s Degree in a Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university and 5 years of software engineering experience OR
Master’s Degree in Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university and 3 years of software engineering experience
Experience developing software / writing code in C/C++ or Ada
Experience with Linux

Preferred Qualifications:

Bachelor’s or Master’s degree in Computer Engineering, Computer Science, or Electrical Engineering
Strong Problem Solving Skills
Experience in Software Test
Familiarity with Atlassian tool suite and tools like git and Confluence
Familiarity with Agile software development process
DOORS
Eclipse or other integrated development environment (IDE)
Knowledge of Linux systems with basic commands
Familiar with aircraft systems/subsystems architectures (i.e., CNI, vehicle, cockpit, …)
Experience with OpenGL
Length of C/L = 12 months
 
Job Number: MB-1740S
Job Location: Melbourne, FL
Rate: 50/hr
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Software Engineer 3 FL

Description:
Principal Software Engineer 3 (Job Number: 18026677, 18026687, 18026691, 18026697)

Number of Openings: 1

Location(s): United States-Florida-Melbourne


Shift: 1st Shift

Target Start Date: Mar 25, 2019

Target End Date: Mar 20, 2020

Pay Rate: $50/hr

Work Schedule: 9/80

Duration of Assignment: Up to 1 year


The Software Engineer will develop, modify and maintain customized or standardized applications using software engineering best practices and standards, and participate in the full life-cycle of software development, to include requirements development, modeling and design, application development, unit to CSCI testing, integration, formal system testing, release, installation, and maintenance. Excellent verbal, written and interpersonal skills are required.

The E-2D program is seeking a software engineer to support multiple E-2D programs. Their responsibilities would include:
• Full Lifecycle design, implementation, and unit testing of software
• Work with various sub teams to integrate functionality with other IPTs
• Actively participate in code reviews
• Develop SW products from all phases of SW life cycle.


Basic Qualifications:

Bachelor’s Degree in a Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university and 5 years of software engineering experience OR
Master’s Degree in Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university and 3 years of software engineering experience
Experience developing software / writing code in C/C++ or Ada
Experience with Linux




Preferred Qualifications:

Bachelor’s or Master’s degree in Computer Engineering, Computer Science, or Electrical Engineering
Strong Problem Solving Skills
Experience in Software Test
Familiarity with Atlassian tool suite and tools like git and Confluence
Familiarity with Agile software development process


DOORS
Eclipse or other integrated development environment (IDE)
Knowledge of Linux systems with basic commands
Familiar with aircraft systems/subsystems architectures (i.e., CNI, vehicle, cockpit, …)
Experience with OpenGL
 
Job Number: MB-1725S
Job Location: Melbourne, FL
Rate: 48-50/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Lifecycle Management Analyst II

Description:
Position Purpose:
Under minimal supervision, perform engineering work related to configuring, deploying, maintaining, and upgrading CAD and Product Lifecycle Management (PLM) applications and processes. Responsible for tasks related to the development and deployment of systems, methodologies, standards and processes that result in the ability to create and manage high fidelity digital data for Gulfstream products. Perform tasks to ensure PLM systems integrity and manage all product configuration data and information throughout the products lifecycle. Provide support for the development of training courses for CAD and PLM Applications.

Unique Skills:
• Problem Resolution Opportunities: Strong interpersonal, organizational, communications, requirements analysis, technical writing and problem-solving skills are required.
• Strong customer relationship management skills. Experience Requirements: Proficiency in CAD modeling utilizing CATIA V5 with emphasis on structural or mechanical design
• Essential Job Functions: PLM apps user support with primary focus on CATIA V5 users Provide solutions to end user identified technical problems in support of the PLM environment. Support the development and execution of business test scenarios to validate PLM system updates.

Education and Experience Requirements:
• Bachelor's Degree in Engineering, Computer Science or a related curriculum required or an equivalent combination of appropriate education and experience sufficient to successfully perform the essential functions of the job. 3 years of engineering or IT experience.
• 1 year experience with CAD and/or PDM tools (CATIA and ENOVIA SMARTEAM preferred.).
• 1 year Database experience, data migration/conversion or related experience preferred.

Principle Duties and Responsibilities:
• Execute plans, according to schedules, for engineering assignments.
• Responsible for engineering feasibility of CAD and PLM solutions for complex assignments or full project of minor complexity.
• Coordinate activities for lower level engineering staff assigned to specific projects.
• Actively work to improve daily processes, to ensure all CAD and PLM systems meet customer requirements.
• Analyze user needs to determine engineering and product data requirements, CAD and PLM functional requirements, and perform analysis as well as process and data modeling to meet user needs.
• Recognize discrepancies and/or problems with analysis, process mapping or system implementation results and work toward corrective action.
• Tailor CAD and PLM applications functionality, to established requirements, policies and procedures.
• Develop system queries and utilities to support users information researches
• Assist in the testing and implementation of new deployment or revisions to the CAD and PLM systems.
• Execute tasks for producing Product Structure and Engineering Bill of Material for use in production and QA.
• Execute tasks for coordinating the release of product definition data, change management and product configuration management, including quality control and change reporting.
• Ensure proper security, archiving and audibility of product releases.
• Analyze, monitor and report business and system status metrics.
• Provide training on new functionalities and upgrades.
• Ensure compliance with FAA regulatory requirements for management and control of all type design data.
• Maintain a current and up-to-date knowledge of developments in a specific discipline and/or other related aircraft fields in order to recommend innovations to improve the quality, economy, and effectiveness of the company product. Perform other duties as assigned.

Other Requirements:
• Experience with CAD and PDM tools (CATIA and ENOVIA LCA, VPM preferred).
• Previous experience with digital pre-assembly of product components (aerospace preferred).
• Experience in process mapping and other process improvement techniques preferred.
• Familiarity with computer-aided design, manufacturing and product data management systems.
• Basic knowledge of design engineering and manufacturing engineering applications and processes.
• Proven computer literacy that includes PC Windows environment with specific skills in MS Access, Excel, PowerPoint, Word, Visio and MS Project.
• Must have strong interpersonal skills, self-motivated, and a general understanding of engineering/manufacturing data requirements and design tools.
 
Job Number: 24-342
Job Location: Savannah, GA
Rate: $40-$50
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Support Manager

Description:
• 5 years of experience working as either a lead, or a manager within an aircraft product support division.
• Will support all divisions – thrust reversers and structures, interiors and transparencies.
• Must have experience managing at least 10 people as a lead, or manager.
• Must have experience with aircraft product support
• Must have experience coordinating efforts between internal engineering teams and customers.
• Must have experience working with customers.
• Must have a degree

The Structures Company is an AA/EOE.
 
Job Number: 287
Job Location: OK
Rate: SALARY - ***DOE***
Duration: DIRECT POSITIONS
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Production Stress Analysis Engineer (Tulsa, OK)

Description:
• Contributes to planning, developing and coordinating of important engineering projects
• Must have some MRB experience in support of a/c structural repairs.
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area Additional Functions

UNIQUE SKILLS
• At least 10 years of detailed stress analysis experience on primary aircraft structures.
• Must have some experience in fatigue analysis on aircraft structure.
• Must have some MRB experience in support of a/c structural repairs
• Experience utilizing FEM. CATIA V5 experience is a plus.

EXPERIENCE/EDUCATION
• Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
 
Job Number: 24-304
Job Location: Tulsa, OK
Rate: $70-$79
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Production Supply Chain Manager / direct hire Palmdale CA

Description:
Job ID#: 21680 Direct Hire position

Seeking production control experience such as stock control, inventory, supply chain, shipping, etc. along with the management experience.

The role is Production Control Manager (attached is the job description).

Key areas: extensive and progressive experience in production control combination of the following.
• supply chain management
• project management dealing with budgets
• labor utilization
• inventory management
• solid leader
o Overall 9+ years of experience with Master’s degree
o 11+ years of experience with Bachelor’s degree
o At least 5+ years of leadership experience
o mentorship
o communication
o development
Industries:
• Any – aerospace, manufacturing, automotive, etc.

Alternative titles:
• Production Control Supervisor and/or Manager
• Supply Chain/Inventory Supervisor and/or Manager
• Inventory Supervisor and/or Manager
• Stockroom or warehouse Supervisor and/or Manager
• Program Manager
• Project Manager


Job Title: Experienced Production Supply Chain Manager
Job Category: Manufacturing, Material and Production Control
City: Palmdale
State: California
Full-Time Salary


**Seeking strong production control experience including inventory, supply chain, shipping, etc. along with the management.

Job Summary


We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

The experienced Supply Chain Inventory Manager is responsible for planning and managing performance of the aircraft production and material control department(s) typically through experienced professional staff or subordinate manager(s). The position manages some or all phases of production and material control to ensure a controlled flow of approved materials timed to meet production requirements. Participates with executive management in developing and implementing annual and long-term objectives for the department(s). May be responsible for decisions that have an impact on work processes and outcome where erroneous decisions could result in serious delays in projects and/or operations. Participates in defining production planning, material control, and administration of the designated ERP tools in support of program schedules.



Duties and Responsibilities

•Manages all phases of the department(s) task execution including planning and recommending policies and procedures to ensure department objectives are attained.


•Participates in the development, interpretation and implementation of manufacturing policies and practices while participating in determining and implementing necessary changes.


•Participates in developing and implementing annual and long-term objectives and monitors adherence to plans and objectives.


•Ensures the scheduling of material will meet the company's commitment to delivering quality products with optimum utilization of resources.


•Monitors adherence to performance standards by support groups such as purchasing, contracts, finance, and quality, and ensures issues are addressed as needed. Monitors performance from development of material master creation through procurement, material receipt and consumption on the manufacturing shop floor. Manages the Material Requirements Planning (MRP) functions through the appropriate ERP tool.


•Ensures the appropriate identification and management of material requirements are established for production and manufacturing from inception to delivery.


•Develops, recommends, implements and monitors consistency of processes across multiple programs to the maximum extent practical; conducts quality control audits and evaluates work standards and performance levels to ensure uniformity, effectiveness and appropriate staffing levels are maintained.


•Oversees the minimizing of inventory carrying cost and reduction of material burden contribution to meet industry standard.


•Manages and actively participates in the planning, attraction, selection, retention, and development of human resources to ensure the availability of the required professional talent to ensure organizational requirements are met.


•Maintains the strict confidentiality of sensitive information.


•Responsible for ensuring all laws, regulations and other applicable obligations are observed wherever and whenever business is conducted on behalf of the Company.


•Responsible for ensuring work is accomplished in a safe manner in accordance with established operating procedures and practices. Additional Functions Other duties as assigned or required.


Job Qualifications
•Bachelor's or master's degree in business administration or related field: ◦Eleven or more years progressive experience with a bachelor's degree
◦Nine years or more with a master's degree.​
◦​Five or more years managing staff in a manufacturing environment. Equivalent professional experience may be substituted in lieu of education.

•Must demonstrate a thorough expertise of production, material control and purchasing principles, theories and concepts.
•Must be able to provide leadership and direction to professional staff and lower management levels.
•Must be customer focused and possess:◦the ability to identify issues, analyze and interpret data, and develop innovative solutions to a variety of complex problems using a high degree of independent judgment;
◦excellent verbal and written communication skills to accurately document, report, and present findings to a variety of internal and external audiences;
◦excellent interpersonal skills to influence and guide all levels of employees;
◦the ability to effectively and efficiently initiate, plan, budget and manage projects;
◦the ability to develop and administer budgets, schedules and performance standards; and,
◦excellent computer skills.
◦Ability to work independently or in a team environment is essential as is the ability to work extended hours and travel as required.


Equal Opportunity Employer.

Travel Percentage Required : 0% - 25%
 
Job Number: JE-21680
Job Location: Palmdale, CA
Rate: Salary range: 95K – 115K
Duration: direct hire
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Program Manager

Description:
Education Required: Bachelor's Degree or higher
Duties and Responsibilities include the following:
Seven to 10 years experience in the following:
Reviews project proposal or plan to determine time frame, funding limitations, procedures for accomplishing project, staffing requirements, and allotment of available resources to various phases of project to include material cost savings or expenses.

Establishes decides on work plan and staffing for each phase of project
Confers with project staff to outline workplan and to assign duties, responsibilities, and scope of authority.
Directs and coordinates activities of project personnel to ensure project progresses on schedule and within prescribed budget

Reviews status reports prepared by functional managers and consolidates/maintains the Master Program Schedule and is responsible for presenting schedule to customer
Prepares project reports for management, client, or others

Confers with project personnel to provide technical advice and to resolve problems
Coordinates project activities with activities of government regulatory or other governmental agencies
Able to communicate program progress and deficiencies to various RSM/SAC/LM leaders including the C-suite.

Previous experience in VVIP, Head of State, in custom aircraft (rotary or fixed wing) interiors preferred
Must have a history in Management of others.
The program is the VH-92A/Sikorsky S-92
Must be a U.S. Citizen
 
Job Number: 1728244
Job Location: Portland, ORE
Rate: 140-175K annually
Duration: Direct Hire
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: P O BOX 965280
2886 SANDY PLAINS RD

City, State: MARIETTA, GA 30066
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Program Manager - EBU Experience Needed

Description:
Must have experience with:
• Must have at least 5 years of experience as a Program Manager within the aircraft industry.
• EBU experience needed.
• Balancing and managing a program P&L.
• Delivery of system hardware to a customer.
• Managing the Test requirements, process, etc.
• Experience with certification of aircraft hardware.
• Managing EPM’s (project Managers).
• Experience presenting, communicating, traveling to, etc. with customers.
• Experience with all deliverables of an aircraft program.
• A BS degree is required.

BENEFITS:
Annual Bonus
Medical benefits
Relocation
401K

The Structures Company is an AA/EOE.
 
Job Number: 286
Job Location: OK
Rate: SALARY - ***DOE***
Duration: DIRECT POSITION
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer

Description:
Description:
Applies extensive knowledge of principles, theories, concepts and industry practices to plan, direct, and coordinate the engineering design, integration, analysis and certification of company products and processes for manufacturing of complete aircraft parts, components, subsystems and complete systems for operational aircraft.


Requirements:
• Catia V5
• Project Engineering
• Multi-Function Coordination
• New Product Definition
• Design Integration (10+ Years)
• Configuration Management
• PMP is a plus
• SmarTeam is a plus
• Background in aircraft design and project coordination is required
• Competent in the use of standard software applications such as Microsoft Word and Excel and operate standard office equipment.
• BSME preferred


The Structures Company is an AA/EOE.
 
Job Number: 261
Job Location: OK
Rate: $60-$65/Hr. **DOE**
Per Diem: Yes
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer

Description:
Job Description:
Provides the Engineering leadership to a team representing the Cabin Systems In-flight Entertainment and Connectivity Engineering group, which may include internal and external resources and customers. Responds to changes to SOW, assesses the impact and negotiates proposed changes to determine modifications to the deliverables, resources, costs and schedules. Leads project execution to complete the work statement. Identifies performance metrics. Plans, identifies, and coordinates resources required over the life of the project or program. Defines plans for risk mitigation and opportunity. Focus on developing, implementing, integrating, and delivering customer introduction aircraft. Works closely with multiple cabin systems platform teams, cabin systems tech center, other systems teams as well as interiors teams. Supports configuration development, resolving cross-commodity design & interface issues, identifying & managing risks for the Customer Introductions and development projects, and serving as the Cabin Systems Integration Engineer to the program. Projects typically span numerous teams (within and beyond both Payloads and Systems) and require consideration of technical, business, and external factors. Works under minimal direction.

Education: Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
 
Job Number: PE2018
Job Location: Everett, WA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6 mon
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer - High Lift Systems

Description:
Currently looking for an experienced Project Engineer - High Lift Systems to fill an opening on a new aircraft project located in Rockford, IL. Interested candidates should preferably have 10+ years of experience in High Lift Systems (Flight Control Systems), especially, QT activities.



Responsibilities of the Project Engineer - High Lift Systems



Support Supplier Integration Team activities as a project engineer of Mechanical System Design Group for High Lift Systems for a new regional jet aircraft program.
Represent in a technical capacity and provide support for compliance test witnessing at partner/supplier sites and test Laboratory locations within U.S.
Provide Qualification and Partner Liaison Coordination Support for Flight Control Systems (High Lift Systems) components.
Develop and review Qualification Test Plans and Procedures jointly with Supplier for DO-160 and other tests, Review Qualification Test Reports, Similarity and Analysis reports.
Witness tests as a ‘Test Director” and report on environmental, functional and performance qualification test completion and results in accordance with engineering and quality processes and standards.
Provide support for test schedule development and tracking metrics and test coordination.
Provide support for component qualification technical issue resolution and tracking.
Prepare and issue agenda and status report of test activity.
Provide support for generation of Test Witness Record (TWR) when Regulatory Agency representatives from JCAB, FAA, EASA or Certifying Staff are present.
Provide support for Test Procedure deviation documentation as needed during test support.
Provide support for component qualification document deliverables tracking.
Support test failure case disposition/resolution and article tear down witness and reporting activities at supplier sites as required by technical teams.


Requirements

10+ years of experience in High Lift Systems (Flight Control Systems), especially, QT activities preferred.
Must have experience with life cycle development, test and qualification and certification documentation (QP, QTP, QTR, QSAR) of Electro Mechanical and hydraulically powered Equipment
Willingness to work long hours when requested by the Lead/Manager to support program needs.
Must have a positive, proactive attitude, and communicate effectively within a multidisciplinary work culture.
Be willing to learn, appreciate, and blend into Japanese work and business culture.
Must be able to travel as required to head office in Nagoya, Japan and Moses Lake Flight Test Center in Washington State as well as Supplier/Partner sites in U.S. to support test witnessing, component conformity inspections, workshops and technical interchange meetings.
 
Job Location: Rockford, IL
Overtime: Yes
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Lead - Repair Engineering

Description:
Project Lead - Repair Engineering
Contract-to-hire
Location: Kansas City, MO
Summary:
We are looking for a candidate to lead the engineering team in the accomplishment of repairs for in service aircraft and aircraft in heavy maintenance.
Duties will include providing guidance and helping develop less experienced engineering staff, provide technical coordination/expertise between the engineering team and the customer, and interacting with vendors and internal organizations. Applicant should have relevant airline, MRO, or OEM in-service support experience with proven leadership.
The individual will lead activities of engineering staff at the discretion of Engineering Management to complete tasks accurately while maintaining responsiveness in order to maintain aircraft, component, and engineering program schedules. Other duties will include development of proposals, assisting with planning and hiring, and other Engineering Management tasks.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
• Leads activities of direct Engineering staff at the discretion of Engineering Management to achieve accurate and timely completion of repairs and modifications during maintenance and component overhaul visits.
• Plans, reviews, organizes, and prioritizes engineering tasks to ensure Engineering completes tasks and maintains responsiveness in order to maintain aircraft, component, and engineering program schedules.
• Primary point of contact between customer representatives and/or internal customers to ensure consistent action in accordance with customer requirements.
• Mentor and train Repair Engineers from all levels of experience; identify and grow the expertise and experience of the team.
• Recognize and fully understand the proper use of all applicable customer, OEM, regulatory, and maintenance requirements, and ensure that these are met.
• Identify performance related issues and provides feedback to management.
• Coordinate and assist in implementing new policies and procedures within the Engineering department to help improve efficiency.
• Analyze and substantiate complex repair and modification designs using standard accepted industry practices. Produce technical analysis of repair standards and history for which FAA approval can be obtained to ensure compliance with all appropriate regulatory, customer, OEM, operations, and maintenance requirements.
• Review existing technical data, technical drawings, and previous history for entire airframe structure, mechanical / hydraulic systems and components, engine pylon/struts, and landing gear; in addition, some avionics, indication, lighting, and electrical systems are occasionally reviewed.
• Provide written technical accomplishment instructions for aircraft repairs or modifications to maintenance, customer, and regulatory authorities as necessary.
• Communicate technical details of repair or modification designs through technical writing and computer drafting functions.
• Independently evaluate, select, and adapt situations, and modify techniques, procedures and criteria to solve problems encountered.
• Approve engineering documents within authorized signatory level.
• Assist in interviewing and making hiring recommendations for new Engineering personnel.
• Participate in the development of work statements and hour estimates in support of proposals.
AUTHORITY:
The individual in this position may initiate technical instructions that are substantiated by data acceptable to or approved by the FAA and EASA or equivalent. For technical instruction pertaining to work accomplished on aircraft or components operated under CFR Part 91, 121, and 145, authority is as specified by the air carrier's procedures and/or Repair Station Manual.
SKILLS AND KNOWLEDGE:
• Experienced with OEM airframe, system, and interior design practices.
• Strong working knowledge of MyBoeingFleet and AirbusWorld for OEM datasets.
• Must be adaptable and flexible at all times and apply their knowledge and skills to develop creative solutions to a wide variety of unique design, modification, and repair problems encountered.
• Strong PC skills will include 3D Computer Aided Design proficiency (SOLIDWORKS or AutoCAD preferred), MS Office products (Word, Excel, PowerPoint, Visio and Project), and basic computer drafting skills.
• Ability to accomplish basic stress analysis and substantiation for complex repairs or modifications using standard accepted industry practices and other structural design methodologies.
• Ability to understand regulatory requirements for airworthiness, for the FAA and various foreign authorities (EASA, etc.) and include in engineering documents, drawings and designs.
• Ability to understand and apply the policies / procedures of all customer(s).
• Ability to understand and apply information from Structural Repair Manuals (SRMs), Aircraft Maintenance Manuals (AMMs), Illustrated Parts Catalogs (IPCs), Service Bulletins (SBs), Airworthiness Directives (ADs) and other aircraft reference materials.
• Ability to interpret and use aircraft manufacturing, assembly, and installation drawings.
• Excellent interpersonal and communication (written and verbal) skills with other groups (avionics, certification, Program Management and Maintenance Leads, MRO Facilities and customers) experience strongly preferred.
• Self-motivated and multi-tasker; able to level load own workload.
• Strong time-management, and problem-solving skills.
EDUCATION AND/OR EXPERIENCE:
Bachelor of Science (B.S.) degree in Aerospace, Mechanical, or Civil Engineering desired with a minimum of ten (10) years relevant aerospace experience or 15 years of equivalent aircraft design experience required.







____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 55916
Job Location: St. Louis, MO
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Manager (VH-3D and VH-60N Model Aircraft)

Description:
This candidate will report to the ILSM and will be responsible for logistics projects with significant scope and complexity. Technical experience and knowledge of the VH-3D and VH-60N model aircraft is desirable.

Must possess the knowledge, skills, and abilities to work independently with minimum oversight.

Main responsibilities will include:
• the management of logistics proposal activities including the flow down of proposal requirements and the planning, execution, and delivery of high-quality logistics elements under contract.
• development and management of schedules and budgets for all logistics activities
• interaction with internal and external customers on a regular basis, including the development and presentation of logistics material at formal meetings.
 
Job Number: 1910099892
Job Location: Stratford, CT
Per Diem: split
Overtime: possible
Duration: 10 month
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Mission Assurance Analyst 4 LA

Description:
164335
1743 Quality Mission Assurance Analyst 4 (Job Number: 19006863)

Number of Openings: 1

Location(s): United States-Louisiana-Lake Charles


Shift: 1st Shift

Target Start Date: Mar 25, 2019

Target End Date: Mar 27, 2020

Work Week: 4/10

Location: Lake Charles, LA

Duration: 1 Year (and potential to extend)


Hourly Rate: $52.50

Develop and implement program quality plans, programs, and procedures using statistical quality control statistics, lean manufacturing concepts, and six-sigma tools and analyses. Ensures that performance and quality products conform to established company and regulatory standards. Reviews, analyzes and reports on quality discrepancies related to assembly, process, mechanical, electrical and electro-mechanical systems. Investigates problems and develops disposition and corrective actions for recurring discrepancies. Interfaces with manufacturing, engineering, customer, vendor and subcontractor representatives to ensure requirements are met. Recommends corrective actions, dispositions and modifications.

Basic Qualifications:

6 Years with Bachelors; 4 Years with Masters


Preferred Qualifications:

Extensive knowledge in production quality assurance is preferred.

Working knowledge and understanding of MES

Aircraft and structures experience is a plus
 
Job Number: MB-1743ATO
Job Location: Lake Charles, LA
Rate: 52.50/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Recruiter

Description:
Recruiter

Fort Worth, TX
$42/hr
1 year W2 contract
First Shift
*MUST BE A U.S. CITIZEN*

Job Description:
Responsible for the execution of staffing and recruitment plans for assigned client organization(s). Provides consultation and guidance to hiring leaders, Human Resource Business Partners, candidates and employees on talent acquisition practices, processes, timelines, and outcomes. Provides diverse slates by sourcing and recruiting nationwide using applicable tools (e.g., CRM tools, hiring events, etc.) to find the best talent that meets business needs. Guides hiring manager’s slating and selection decisions. Ensures successful completion of documentation and compliance with all hiring requirements through applicant tracking system (e.g., Brassring or other ATS systems). Represents the company in various internal and external hiring forums, as well as with professional associations, diversity groups, and community service groups as needed. Maintains ongoing communication and working relationships with hiring leaders, employees, candidates, HR Business Partners, Labor Relations, Compensation, Global Diversity & Inclusion, and Legal as needed. Drives lateral connectivity and collaboration within Human Resources and across the enterprise. Utilize Microsoft Office. Performs other duties as assigned.

Requirements:
-Must have experience in Aviation/Aerospace/DoD -High volume, full cycle recruiting experience required
-Must have experience recruiting Aircraft mechanics,
Structural Assemblers, touch labor roles.
-This position is virtual, the contractor will train onsite for approximately 2 months then transition to virtual.

Additional:
Looking for candidates experienced in high volume recruiting of touch labor candidates. Prefer candidates with experience recruiting in the Aero Space industry. Position will require the recruiter to recruit for hard to find skills as well as cleared positions.
 
Job Number: 10736
Job Location: Fort Worth, TX
Rate: 42.00
Per Diem: Split Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Reliability and Maintainability Engineer

Description:
We are seeking a highly organized individual with excellent communication skills to fill a Reliability and Maintainability Engineer role here in Moses Lake, WA in support of a new aircraft program. The Reliability and Maintainability Engineer responsibilities include but are not limited to:
Collect, analyze and score Failure Reporting, Analysis Corrective Action System (FRACA) data.
Perform Root Cause Analysis (RCA), Engineering Investigations (EI) and develop Corrective Action Plans (CAP) for failed aircraft components.
Perform Failure Modes, Effects and Criticality Analyses (FMECA) and testability assessments including fault detection and fault isolation.
Estimate man-hours and elapsed hours for maintenance actions.
Formulate reliability analyses and predictions including development of failure rate estimates.
Assess maintainability analysis using digital mockup.
Assist in developing troubleshooting procedures and guiding maintenance personnel in the performance of troubleshooting as a result of flight squawks during flight test.
Evaluate flight test campaign events and prioritize them.
Review the events and evaluate impacts for R&M which means impacts for airline fleet (Dispatch Reliability and Maintenance Cost etc.).
Coordinate with reliability team troubleshooting members and maintenance team to perform root cause analysis and make feasible countermeasures.
Conduct detailed investigations for priority issues and root cause analysis through coordination with related team members (Engineering, Maintenance and Flight Test Team etc.).
Propose feasible countermeasures with engineering and promote their implementation.
Prepare periodic reports on priority reliability and maintainability issue and the status of proposed countermeasures.


Requirements
BS Degree in Engineering/Mathematics
7-10+ years experience in field a plus
Position also requires experience with or knowledge of the following:
Failure Reporting, Analysis and Corrective Action Systems (FRACAS)
Reliability Program Plans
Reliability Predictions and Analysis
Failure Modes, Effects and Criticality Analysis (FMECA)
Maintainability Analysis and Prediction
Application of probability and statistics to support decisions regarding sample size, burn-in life testing and failure analysis investigations
Complete competency with Microsoft Word, Excel and PowerPoint
Good written and oral communication skills
Strong interpersonal skills especially across cultures
Ability to work in a fast-paced, collaborative team environment
Demonstrated ability as a team player to build consensus among peers and build effective relationships with team member.
 
Job Location: Moses Lake, WA
Per Diem: Possible
Overtime: Yes
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
SENIOR ENGINEER

Description:
Senior Engineer



Summary: Working with minimal supervision this individual will be responsible for the design and development of environmental control system products and / or systems for aerospace applications. May work directly with customers and provide both technical and project leadership to internal and external resources.



Essential Duties and Responsibilities include the following:


  • Performs engineering assignments with limited supervision.

  • Assesses customer requirements and develops designs, or provide design direction, to meet requirements.

  • Prepare program plan and effectively identify and manage program risks.

  • Analyze problems and makes decisions on proper action to be taken.

  • Responsible for completion and accuracy of engineering documentation.

  • Prepares and presents design data in support of internal and Customer design reviews.

  • Support DFX (Design for Cost, Manufacturability, Reliability, etc.) efforts.

  • Prepares Development and Qualification Test Plans, Procedures and Test Reports.

  • Monitors and controls program cost and schedule.

  • Supports existing products.

  • Makes recommendations for design, cost, or process improvements including substantiating strategy.

  • Provides technical direction and advice to Business Development, Manufacturing and Quality organizations.

  • Performs assignments broad in nature requiring substantial ingenuity and originality usually acquired through industry experience. These assignments may involve:

  • Sophisticated product and technology development.

  • Rigid timetables and short lead schedules

  • Extensive planning and interaction with many support groups and departments.

  • Complex report writing and detailed testing for customer or regulatory approval.

  • Provides leadership to support personnel and less experienced engineering team members

  • Assists in planning and coordination with support groups.

  • Reviews project status, makes recommendations where necessary and instructs in details unique to industry.

  • May perform supervisory duties (train, mentor, evaluate, etc.) for departmental employees on specific tasks or projects.

  • Assists Business Development Department in proposal preparation and customer presentations; interacts with customers and suppliers on technical and program matters.

  • Communicates status accurately and regularly to Management, recommending solutions for problems encountered.

  • Assists Manager in departmental planning and operations.


QUALIFICATIONS


  • B.S. Degree in Engineering

  • 7 years' experience in design, development, qualification and production support of aerospace components.

  • Specific experience in aircraft environmental controls systems and components is highly desirable.

  • Excellent report-writing skills, presentation and customer interface skills.

  • Strong knowledge of CAD design and analysis tools.

  • Proficient in the use of MS Office software, experience with MS Project a plus.

  • Knowledge and experience of DO-160 / MIL-STD-810 requirements




Travel: Periodic travel required to support customer onsite meetings and reviews, both domestic and international.



Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-01294
Job Location: Seminole, OK
Rate: 0.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-01-10 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Kristy Thompson
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
SR.ELECTRICAL ENGINEER

Description:
SENIOR ELECTRICAL ENGINEER  

An Oklahoma based aerospace engineering and manufacturing company of aircraft environmental control systems is seeking a Sr. Electrical Engineer.



RESPONSIBILITIES:


  • Research, develop, design, model and certify analog/digital circuits for use in brushless motors.

  • Devise new approaches to problems encountered, assists technical personnel in execution of drawings, perform technical studies and evaluations. 


REQUIREMENTS: 


  • At a minimum a Bachelor's Degree in Electrical Engineering and analog/digital design experience 

  • 5+ related work experience

  • The ability to work well in a team environment, to trouble shoot, teach or learn about the designs. 

  • Exercise independent judgment to develop designs with minimal direction and concurrently support multiple projects. 

  • The ability to communicate with other engineers and customer representatives to resolve design discrepancies and develop products.

  • Aerospace Industry experience a plus.


  

Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
 
Job Number: 19-00245
Job Location: Seminole, OK
Rate: 120000.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-01-03 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Kristy Thompson
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Service Stress Engineer

Description:
• A fundamental understanding of static stress analysis as it relates to sizing airframe structural repairs
• Experience as a stress analyst in post-production environment or a production Material Review Board (MRB) stress engineer
• Experience with airworthiness regulations in regards to major repairs or alterations of external airframe parts and components and the requirements to find compliance when analyzing a repair
• The ability to effectively work with & support a multi-discipline team of engineers, mechanics, Tech Ops, Quality Control, upper management, etc.
• Strong written and verbal communication and collaborative skills and the ability to effectively communicate the organization's position with external and internal customers
• Practical hands on aircraft experience and problem solving

Preferred Unique Skills:
• Gulfstream engineering experience, e.g. G650, G500, G600.
• Experience in fatigue analysis and damage tolerance analysis.
• Experience in the repair and analysis of composite structure
• Experience in repair and analysis of aircraft landing gear.
• Experience in development of Structural Repair Manual (SRM) data.
• Experience with foreign airworthiness regulatory agencies

Principal Duties and Responsibilities:
• Responsible for an entire engineering project of major complexity within established scope
• Makes technical decisions and recommendations that are recognized as authoritative and have an important impact on extensive engineering activities
• Applies advanced technical principles, theories and concepts based on broad expertise or unique specialized knowledge
• Leads the development of innovative principles and ideas
• Acts independently to determine improved methods and/or procedures to optimize technical product, cost and schedule requirements
• Works under consultative direction; uses independent judgment to accomplish objectives
• Develops standards and guides for diverse engineering activities
• Conceives and plans investigation of broad areas of importance for which engineering precedents are lacking in areas critical to the program
 
Job Number: 24-339
Job Location: Savannah, GA
Rate: $79/hr
Per Diem: YES
Overtime: Possible
Duration: 1 year+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer - Clearance GA

Description:
163931
1313-1 Software Engineer
Work Location: Marietta, GA
Status: Open

Qty: 5
Desired Start Date: 1/16/2019
End Date: 3/8/2020

Job Description:
Individual will perform software development and integration for distributed, real-time simulation systems that include a mix of aircraft software and simulation software. These systems represent an extensive selection of simulators and software/systems integration test capabilities, including low-cost rapid prototyping concept development systems, full-dome handling qualities simulations, high-fidelity multi-ship, real-time, man-in-the-loop simulation systems, and hardware-in-the-loop mission systems and vehicle systems integration venues in a fast-paced, multi-disciplined research and development environment.
Responsibilities include:
(1) real-time simulation software design and development and
(2) software integration and test.
Some requirements analysis, system verification and validation may also be required.

Region: Marietta, GA
Level: Level 4: BS+11 YRS or MS+9 YRS
Pay Rate: $69.00 Hourly

Skills:
Software Skills ADA No 6 1 - 2 Years
Software Skills C++ - Advanced Level No 1 6 + Years
Software Skills Linux No 4 4 - 6 Years
Software Skills Modeling No 8 4 - 6 Years
Technical Skills OO Design No 7 6 + Years
Technical Skills OO Programming No 2 6 + Years
Technical Skills Real Time No 5 4 - 6 Years
Technical Skills Simulation No 3 4 - 6 Years
 
Job Number: JE-1313-1S5
Job Location: Marietta, GA
Rate: 69/hr max
Per Diem: no
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer - Clearance TX

Description:
163932
1312-1 Software Engineer
Work Location: Fort Worth, TX
Status: Open

Qty: 10
Desired Start Date: 2/4/2019
End Date: 3/27/2020

Job Description:
Individual will perform software development and integration for distributed, real-time simulation systems that include a mix of aircraft software and simulation software. These systems represent an extensive selection of simulators and software/systems integration test capabilities, including low-cost rapid prototyping concept development systems, full-dome handling qualities simulations, high-fidelity multi-ship, real-time, man-in-the-loop simulation systems, and hardware-in-the-loop mission systems and vehicle systems integration venues. n a fast-paced, multi-disciplined research and development environment.

Responsibilities include:
(1) real-time simulation software design and development and
(2) software integration and test. Some requirements analysis, system verification and validation may also be required.

Region: Fort Worth, TX
Level: Level 4: BS+11 YRS or MS+9 YRS
Pay Rate: $65.74 Hourly OT40

Skills:
Software Skills ADA No 6 1 - 2 Years
Software Skills C++ - Advanced Level No 1 6 + Years
Software Skills Linux No 4 4 - 6 Years
Software Skills Modeling No 8 4 - 6 Years
Technical Skills OO Design No 7 6 + Years
Technical Skills OO Programming No 2 6 + Years
Technical Skills Real Time No 5 4 - 6 Years
Technical Skills Simulation No 3 4 - 6 Years
 
Job Number: JE-1312-1S5
Job Location: Fort Worth, TX
Rate: 65.74/hr max
Per Diem: no
Duration: 13 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr Technical Writer

Description:
Sr Technical Writer is directly responsible (either individually or with other team members) for the development of technical publications. This can include special projects, research and development, and aircraft safety-related content. Support the complete workflow process to ensure successful development and revision of technical publications. Comply with established quality processes to ensure accuracy, ease of use, and timely delivery of content. EWIS (Electrical Wiring Interconnection System) best practices, S1000D Technical Publication Specification, STE (Simplified Technical English), and PLM (Product Lifecycle Management) database experience desired.


Principle Duties and Responsibilities:

Sr Technical Writer with minimal to no supervision, use aircraft technical data to develop technical content that provides the information necessary for efficient return to service of the aircraft. 2. Conduct reviews, analysis, and modification of technical documents to gain a thorough understanding of complex aircraft system operation. 3. Provide training support on complex system operation and technical publications software and processes. 4. Participate with publications team to ensure department workflows and business processes are followed. 5. Proactively conduct discussions with internal/external customers in the development of source data, making sure it meets technical publication requirements. 6. Directly collaborate with Research and Development, Production, Completions Center, and Customer Support personnel to develop, review, and approve technical procedures. 7. Provide process improvement recommendations to leadership that can reduce overall department cost and/or increase productivity. 8. Contribute to development and continuous improvement of department styles, standards, operating procedures, and priorities. 9. Provide input to leadership on new processes or technology to enhance the Technical Publications business model. 10. Assist in the development of solutions to resolve technical data challenges. 11. Collaborate with leadership, team members, and other departments to develop/implement special projects. Perform other duties as assigned.

Sr Technical Writer has extensive knowledge of aircraft system methodology gained through practical experience is required. 2. Strong technical writing and communication skills are required. 3. Ability to read and interpret engineering data is required. Experience with 3-D data is desired. 4. Thorough knowledge of aircraft/hand tools, test equipment, parts nomenclature, maintenance procedures, and aircraft equipment (obtained through experience, research, or training) is required.
Education and Experience Requirements:
Bachelor's Degree or equivalent experience in the authoring of technical publications required. Four (4) years of technical publications experience, to include using industry standards to develop/revise technical documents in word processing applications. Knowledge of basic aircraft system methodology or equivalent technology is required. Proficiency in computer technology/software and typing skills is required. An A&P license and 4 years of related aircraft experience in addition to the four (4) years technical publications experience may offset the degree.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Design Engineer-Gear Systems

Description:
Our client is looking for an engineer who has experience with precision gear systems, accessory gearboxes, power generation gearboxes, actuators, propeller drives.

The Senior Design Engineer is expected to have high proficiency and experience with Creo or CATIA with experience in MASTA or ROMAX regarded as a plus. The Senior Design Engineer must have demonstrated experience in the management of mechanical system design, integration and development. Analytical knowledge of Reliability, FMECA, Ansys, Nastran, RCCA and Six Sigma are also key to the position. Familiarity with formal Qualification Standards such as DO160, MIL-STD-810 and/or EUROCAE ED-14 is desirable. Job function requires timely preparation of all associated engineering documentation including but not limited to Project Plans, Test Plans, Project deliverable documents and Engineering Changes. The ideal candidate would have broad technical knowledge of aircraft systems and awareness of current aircraft developments and technologies. The ideal candidate would also have a comprehensive knowledge and experience in Aerospace Manufacturing Processes and Methods.

• University degree in Mechanical or Aerospace Engineering.
• Minimum of ten (10) years of relevant design experience (Aircraft Systems Engineering).
•Proficiency in design and analytical software tools, Microsoft Word, Excel, Project, PowerPoint.
• High proficiency in written and verbal communication.
• Ideally 10 plus years’ experience in an aerospace gear system, transmission or actuation related industry.
• Experience in Advanced Gear System Design Software such as MASTA and ROMAX is a plus.
• Demonstrated ability to manage and support Project Engineering and Project Schedules.
 
Job Location: Salt Lake City, UT
Rate: $55-$60
Per Diem: Yes, Split
Overtime: Possible
Duration: 12 Months +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AMERICAN CONTRACT GROUP
Attention: Derek Doucette
Address: 50 HIGH ST STE 46
City, State: NORTH ANDOVER, MA 01845
Phone: 978/984-5581
800 Phone: 877/723-9087
Fax Phone: 978/208-8246
Website: www.americancontractgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Manufacturing Engineer

Description:
SENIOR MANUFACTURING ENGINEER


DYNAMIC & GROWING OKLAHOMA BASED MANUFACTURER OF AIRCRAFT ENVIRONMENTAL CONTROL SYSTEMS IS SEEKING A SENIOR MANUFACTURING ENGINEER



RESPONSIBILITIES:


  • Develope and maintaining processes and procedures which insure product conformity

  • Evaluate processes and identify areas of improvement such as labor, material and reliability

  • Create manufacturing and assembly drawings when applicable

  • Create and control sketch drawings for production and purchasing

  • Interact with production to resolve assembly and test problems and identify and develop assembly tool needs


QUALIFICATIONS:


  • BS in Mechanical or Aero Engineering required

  • Minimum 5 years' experience required in manufacturing or quality related position

  • Auto Cad/Inventor training

  • Excellent verbal, writing and communication skills






Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-01114
Job Location: Seminole, OK
Rate: 100000.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-01-09 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Kristy Thompson
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Mechanical Engineer - Aero

Description:
SR. MECHANICAL ENGINEER

An Oklahoma based aerospace engineering and manufacturing company of aircraft environmental control systems is seeking a Sr. Mechanical Engineer.



Working under the guidance of an engineering manager, staff engineer or senior level engineer, this individual will be responsible for supporting product development programs for aerospace environmental control system applications.



RESPONSIBILITIES:


  • Component and / or system design development, verification, validation, transition to production and continued sustaining support as required.

  • Performs project assignments under the direction of engineering manager, staff engineer or senior engineer.

  • Assesses customer requirements and designs projects to meet these requirements.

  • Analyzes problems or difficulties and recommends action to be taken.

  • Responsible for completion and accuracy of engineering documentation.

  • Prepares and presents design data in support of internal and Customer design reviews.

  • Support DFX (Design to Cost, Manufacturability, Reliability, etc.) efforts.

  • Prepares Development and Qualification Test Plans, Procedures and Test Reports.

  • Monitor and control project cost and schedule and effectively communication project status to stakeholders.

  • Supports existing products.

  • Makes recommendations for design, process or cost reduction improvements including substantiating tests and analysis.

  • Provides technical assistance to Business Development, Manufacturing and Quality organizations.

  • Maintains project files, ensures proper documentation per Company guidelines

  • Provides leadership to support personnel as required.

  • Assists in planning and coordination with support groups.

  • May directly supervise departmental employee (e.g. lab technicians)

  • Reviews project status, makes recommendations where necessary.

  • Assists Business Development Department in proposal preparation and customer presentations; interacts with customers and suppliers on technical and program matters.

  • Communicates status accurately and regularly to Management, recommending solutions for problems encountered. 

  • Performs miscellaneous duties as needed within Engineering Department.


     QUALIFICATIONS:


  •        Bachelor's degree in Mechanical or Aero Engineering

  •        5+ years' related work experience






Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
 
Job Number: 19-00247
Job Location: Seminole, OK
Rate: 115000.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-01-03 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Kristy Thompson
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Staff Structural Analysis Engineer 5 / NASTRAN, FEMAP CA

Description:
1758 Staff Structural Analysis Engineer 5 (Job Number: 19009696)

Number of Openings: 3

Location(s): United States-California-El Segundo


Shift: 1st Shift

Target Start Date: Jun 24, 2019

Target End Date: Jun 19, 2020
Pay Rate: $82 to $84/hr

Work Schedule: 9/80

Duration of Assignment: Up to 1 year
3 Openings

Seeking a Contract Structural Analysis Engineer. The selected candidate will perform structural analysis on metallic and composite airframe structures.

Essential Functions:

• Develop solutions to difficult problems that are thorough, imaginative, practical, and consistent with program objectives.
• Coordination and clear communication with other disciplines during the development of design solutions.
• Evaluation of engineering products for conformity to standards, procedures, and specifications.



Basic Qualifications:

• BS degree in Engineering (Aerospace, Mechanical, or Civil) and a minimum of 12 years of experience in Aerospace structural analysis or MS degree in Engineering (Aerospace, Mechanical, or Civil) with 12 years of experience.
• Experience in Metallic or Composite Structural Analysis of primary and secondary aircraft structures.
• Experience in Structural Analysis Methods and documentation, including hand-sheet analysis, as well as the development and manipulation of large FE Models using NASTRAN, FEMAP or other FEM tools.



Preferred Qualifications:

• Experience working on military aircraft
 
Job Number: JK-1758
Job Location: El Segundo, CA
Rate: 84/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Analysis Engineer

Description:
Requirements:

Looking for someone with at least 2 years of primary composite Stress Analysis experience.
Extensive experience developing and running finite element internal loads models.
Extensive experience calculating strength and updating Global FEM properties
Experience with full scale static testing is a plus.
Must have experience with FEA/FEM tools like Nastran, Patran, or FEMAP.
Writing certification reports is a plus
Experience with light aircraft a plus. Experience with larger aircraft is ok as long as the experience was with composite structure.
Experience and a high level of comfort working in undefined environment and ability to work without direction.


Job description:

This is a Senior-Level stress analyst position in the Aerostructures Engineering Organization. General responsibilities include leading and coordinating the stress activities within an assigned project, establishing and communicating clear task expectations, defining engineering criteria and analysis methods to ensure consistency, and reviewing analysis and reports for accuracy and conformance with program requirements.


The ideal candidate for the Senior Airframe Stress Analyst will possess the following skills and experience:
Act as the first level of authority within the team for technical approval and exercise latitude in determining technical objectives of programs.
Must have a thorough working knowledge of the design of flight vehicles or vehicle systems to a set of requirements or standards such as 14 CFR Part 23 and Part 25, MIL-HDBK-516C, or NASA Procedural Requirements as they relate to certification of airframe structures.
Leveraging diversified knowledge and engineering experience, provide directions and coordinate work within the assigned analysts and actively participate in daily operations as required to meet schedules and resolve issues.
Work with inter-disciplinary teams such as Design, Loads, Materials & Processes and Manufacturing groups to provide solutions to mitigate form, fit, function, producibility, and maintainability aspects of airframe structural designs.
Excellent verbal and written communication skills, including strong interpersonal and communication skills in dealing with program management and customers.
Demonstrate proficiency in FEA tools.


Responsibilities:
Create appropriate engineering criteria and analysis methods to ensure that the work meets all program requirements (e.g., airworthiness, customer requirements, internal methods and processes, etc.).
Actively develop and evaluate plans for activities and soundness of proposed methods and analysis to meet the program schedules and airworthiness standards.
Select appropriate material systems for structures applications and identify all material testing requirements.
Identify and communicate technical risks to the relevant stake holders through program status reports in a timely manner.
Review all program critical documents such as stress reports, manufacturing plans and procedures, and structural test plans in a timely manner to ensure compliance with design and loads requirements.
Resolve complex engineering issues in creative and effective ways as to balance technical product, cost, and schedule.
Mentor, coach and motivate the stress team members in every way possible.


Minimum Requirements (education and experience):
4 year engineering degree from an accredited university (BS in Mechanical Engineering, Aerospace Engineering or similar)
8+ years of applicable experience with a Master degree or 10+ years of applicable experience with a Bachelor degree
Demonstrated ability to use Microsoft Excel, Word and Powerpoint


The Structures Company is an AA/EOE.
 
Job Number: 243
Job Location: VA
Rate: $80-$85/HR. **DOE**
Per Diem: Yes
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Analysis Engineer - Interior Furnishings

Description:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

Unique skills:
• Required Candidate will be performing structural analysis of Gulfstream interior monuments using FEA and classical hand analysis.
• Responsibilities will include both the analysis and certification documentation.
• The ideal candidate will have experience in the following:
• Use of finite element analysis for both primary and secondary structures
• Working with company delegated structural AR's in an ODA environment in support of new and unique STC certification of aircraft installations
• A working knowledge of FAR part 25 certification requirements
• A good understanding of a fast paced completion-style environment
• Working knowledge of FEMAP is required

Responsibilities
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area


Education and Experience Requirements:
• Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Five (5) ys in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
 
Job Number: 24-356
Job Location: Savannah, GA
Rate: $68 to $75
Per Diem: Yes
Overtime: Yes
Duration: Long term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Analysis Engineer - Interior Furnishings

Description:
Candidate will be performing structural analysis of Gulfstream interior monuments using FEA and classical hand analysis. Responsibilities will include both the analysis and certification documentation. The ideal candidate will have experience in the following: - Experience performing structural analysis on aircraft Interior Furnishings - Use of finite element analysis for both primary and secondary structures - MRB experience for both Primary and Secondary Structures - Working with company delegated structural AR's in an ODA environment in support of new and unique STC certification of aircraft installations - A working knowledge of FAR part 25 certification requirements - A good understanding of a fast paced completion-style environment - Working knowledge of FEMAP is required
 
Job Number: 142761
Job Location: Savannah, GA
Rate: $72.00
Per Diem: yes
Overtime: yes
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: P O BOX 965280
2886 SANDY PLAINS RD

City, State: MARIETTA, GA 30066
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Analysis Engineer - Propulsion, Hydraulics or Engine Systems

Description:
Seeking a Stress Analysis Engineer that has experience working with aircraft mechanical systems including propulsion, hydraulics, or engines, etc.
Must have dynamics stress analysis experience
Must have BS degree

Experience working for Gulfstream, OR Piper, OR Honda Aircraft, OR Boeing, OR Sikorsky, OR Lockheed, OR Northrop, OR Textron, OR any commercial, executive, or helicopter company.

Experience with commercial aircraft (larger), OR experience with executive/sport/light aircraft (smaller), OR experience with helicopters. Experience with metallic, OR composite airframe. Must be capable of doing analyses using reference materials.
Nastran, Patran, or FEMAP.

The Structures Company is an AA/EOE.
 
Job Number: 280
Job Location: Manassas, VA
Rate: $80-$85/Hr.
Per Diem: Yes
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Analyst

Description:
Location: Palmdale, CA
Rate: $80.00 - $110.00/HR
Duration: 1 year contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Requirements:
- This position requires an Aircraft Stress Analyst to use their technical expertise to perform analysis of aircraft primary and secondary structure.
- The candidate will have a complete understanding of technical principles, theories and concepts in the field of aircraft structural analysis.
- The candidate will be expected to work independently with only general oversight and will be required to provide guidance to junior engineers.
- The candidate will be responsible for documenting work clearly and concisely.
- The candidate will also be expected to use their technical expertise to develop structural analysis methods and perform structural analysis of advanced composite structures.

Education:
- B.S. Degree +16 YRS of experience or M.S. Degree +14 YRS of experience.
- Candidate must have working knowledge/experience with FEM software (Nastran or Abaqus), Computer Aided Design software (CATIA V5), and other pre/post processor software (Slim, Vision, etc.).
 
Job Number: 9732
Job Location: Palmdale, CA
Rate: $80.00 - $110.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Analyst

Description:
Location: Savannah, GA
Rate: $79.00/HR
Duration: Long Term Contract
Shift: 2nd Shift
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
1. A fundamental understanding of static stress analysis as it relates to sizing airframe structural repairs.
2. Experience as a stress analyst in post-production environment or a production Material Review Board (MRB) stress engineer.
3. Experience with airworthiness regulations in regards to major repairs or alterations of external airframe parts and components and the requirements to find compliance when analyzing a repair.
4. The ability to effectively work with & support a multi-discipline team of engineers, mechanics, Tech Ops, Quality Control, upper management, etc.
5. Strong written and verbal communication and collaborative skills and the ability to effectively communicate the organization's position with external and internal customers.
6. Practical hands on aircraft experience and problem solving.

Preferred Skills:
1. Company engineering experience, e.g. G650, G500, G600.
2. Experience in fatigue analysis and damage tolerance analysis.
3. Experience in the repair and analysis of composite structure.
4. Experience in repair and analysis of aircraft landing gear.
5. Experience in development of Structural Repair Manual (SRM) data.
6. Experience with foreign airworthiness regulatory agencies.

Education and Experience Requirements:
1. Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
2. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
1. Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services

Principle Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
2. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 10644
Job Location: Savannah, GA
Rate: $79.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Analyst

Description:
Location: Savannah, GA
Rate: $74.00 - $80.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
- Static and fatigue analysis of primary and secondary airframe structure of metallic construction experience.
- Strong background in classical stress analysis.
- Experience with Catia V5 to support stress analysis and drawing release.
- Experience with reviewing 2D drawings.
- Ability to work independently under limited supervision.
- Experience with aircraft modifications and repairs (STC, MRB, or Service) preferred.
- Static analysis of composite structure
- Composite allowable testing and certification requirements.
- Experience with Patran/Nastran is a plus.
- Strong preference for engineers that enjoy working in a collaborative environment.
- Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.

Education and Experience Requirements:
- Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
- Five (5) years in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principle Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required. To be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
3. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 10299
Job Location: Savannah, GA
Rate: $74.00 - $80.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineer

Description:
Required Skills 1) A fundamental understanding of static stress analysis as it relates to sizing airframe structural repairs 2) Experience as a stress analyst in post-production environment or a production Material Review Board (MRB) stress engineer 3) Experience with airworthiness regulations in regards to major repairs or alterations of external airframe parts and components and the requirements to find compliance when analyzing a repair 4) The ability to effectively work with & support a multi-discipline team of engineers, mechanics, Tech Ops, Quality Control, upper management, etc. 5) Strong written and verbal communication and collaborative skills and the ability to effectively communicate the organization's position with external and internal customers 6) Practical hands on aircraft experience and problem solving The following unique skills are preferred: 1) Gulfstream engineering experience, e.g. G650, G500, G600. 2) Experience in fatigue analysis and damage tolerance analysis. 3) Experience in the repair and analysis of composite structure 4) Experience in repair and analysis of aircraft landing gear. 5) Experience in development of Structural Repair Manual (SRM) data. 6) Experience with foreign airworthiness regulatory agencies
 
Job Number: 19-143956
Job Location: Southeast
Rate: $79.00 per hour
Per Diem: Split
Overtime: Possible
Duration: Possible Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineer

Description:
Performs stress reviews and analysis of aircraft interior, system and structural installations. Determines critical loads and substantiation path for installations, assemblies and details.

Duties: Review engineering drawings for structural integrity and compliance with FAA regulations; Completes stress analysis documents to show compliance to FAA regulations; Works to budgets and project schedules; Utilizes classical hand analysis methods and Finite Element Modeling techniques; May perform as functional “Lead” for stress team on specific project(s).
 
Job Number: 19-1104
Job Location: WA
Per Diem: Split
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fatigue and Damage Tolerance Engineer

Description:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Unique Skills:
• Fatigue and Damage tolerance experience preferred on primary and secondary airframe metallic structure
• Strong background in classical stress analysis.
• Experience with Catia V5 to support stress analysis and drawing release.
• Experience with reviewing 2D drawings.
• Ability to work independently under limited supervision.
• Experience with aircraft modifications and repairs (STC, MRB, or Service) preferred.
• Experience with Patran/Nastran is a plus.
• Strong preference for engineers that enjoy working in a collaborative environment.
• Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.
 
Job Number: 24-313
Job Location: Savannah, GA
Rate: $74 - $80
Per Diem: YES
Overtime: YES
Duration: 1+ years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineer

Description:
Seeking an Airframe Stress Engineer who will be responsible for all aspects of structural integrity and implementing long-term roadmap on stress methods development. This position will initially be located in our Reno, NV, headquarters and report directly to the Structures Manager.

Qualifications:
• Build and Lead team developing stress analysis methods and tools for AS2 aircraft design and certification.
• Thorough understanding of latest structural static, durability and damage tolerance requirements for Part 25 certification.
• Develop roadmap for structures team - in partnership with Tier 1 supplies and Partners – in the areas of analysis methods, tools and failure criterions for the entire aircraft.
• Support IPT leads in development of the PSP, PSCP, issue papers, and other certification documents.
• Knowledge of the conceptual and preliminary design phases of aircraft development is strongly preferred
• Provide input to maintenance program, inspection intervals and inspection methodologies.
• Support new business development, trade studies and proposal activities.
• Support design reviews with IPT teams and partners/suppliers.

Requirements:
• Must be either a US citizen, a US permanent resident (a “US Person”) or a Canadian citizen.
• Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure / confidentiality agreement with current or any former employer that would prevent you from fully performing the duties of the position.
• Minimum Bachelor’s Degree in Engineering. Master’s Degree strongly preferred.
• 12+ years of experience in performing stress analysis, developing methods and performing validation testing for Part 25 aircraft components.
• 3+ years of experience in leading stress and/or structural integrity team.
• You must have demonstrated leadership capabilities.
• Demonstrated success in dealing and influencing internal and external stakeholders
• Strategic thinker with very strong decision making and communication skills.
• Highly self-motivated with a strong bias for action, and excellent problem-solving skills across multi-disciplinary skill sets.
 
Job Number: 42-012
Job Location: Reno, NV
Rate: DOE but competitve
Per Diem: YES
Overtime: YES
Duration: 1 year+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineer

Description:
Stress Engineer assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services


Stress Engineer does Static and fatigue analysis of primary and secondary airframe structure of metallic construction experience. • Strong background in classical stress analysis. • Experience with Catia V5 to support stress analysis and drawing release. • Experience with reviewing 2D drawings. • Ability to work independently under limited supervision. • Experience with aircraft modifications and repairs (STC, MRB, or Service) preferred. • Static analysis of composite structure • Composite allowable testing and certification requirements. • Experience with Patran/Nastran is a plus. • Strong preference for engineers that enjoy working in a collaborative environment. • Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.

Principle Duties and Responsibilities:

Stress Engineer contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area
Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) is in specific technical discipline or ten (10) yrs. broad Eng. experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters, 4 yrs. for PhD in fields applicable to this job.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineer - MRB

Description:
Must have a minimum of 10 years’ experience in stress analysis on primary aircraft structure. Must have a minimum of 5 years’ experience in stress analysis on aircraft composite structure.
Must have a minimum 5 years’ experience supporting MRB activities on aircraft composite structure. Working knowledge of CATIA V5 is a plus.



Job Description: Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
5 years in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Responsibilities: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 19-139001
Job Location: OK
Rate: $70 - $79
Per Diem: Split
Overtime: Possible
Duration: Year +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineers - Many Needed - Level 3

Description:
Description:
*BS Engineering Degree
*5+ Years Exp.
*Previous Aircraft Background
*Classical Methods for Structural Sizing of Traditional Airframe Primary Structure, metals & Composites
*Patran

Email resume to: mmccarthy@pdstech.com
 
Job Number: Bo-Everett-Stress 3
Job Location: Everett, WA
Rate: $65.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 6 Months+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineers - Many Needed - Level 3

Description:
*BS Engineering Degree
*5+ Years Exp.
*Previous Aircraft Background
*Classical Methods for Structural Sizing of Traditional Airframe Primary Structure, metals & Composites
*Patran

Email resume to: mmccarthy@pdstech.com
 
Job Number: Bo-Tuk-Stres3
Job Location: Tukwila, WA
Rate: $65.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 6 Months+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineers / Stress Analysts Needed

Description:
Airframe stress analysis and sizing of major aircraft structural components for CFR 14, Part 25 and EASA CS-25 certification.
Support internal loads development and coordination of airframe stiffness updates between major structural components/suppliers.
Support development of analysis methods and tools for design/manufacture/testing/certification.
Support Tier 1 Supplier/Partner analysis and oversight of methods.
Support design reviews and model releases for all structural interfaces within an IPT environment.

Requirements:
Must be a US or Canadian citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772.
8+ years of experience in performing stress analysis, developing methods or performing validation testing for Part 25 aircraft components.
Must have a bachelor’s degree in Aerospace or Mechanical Engineering, or similarly related area.
Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure / confidentiality agreement with current or any former employer that would prevent you from fully performing the duties of the position.
Knowledge of the conceptual and preliminary design phases of aircraft development is strongly preferred.
Knowledge of structural static, durability and damage tolerance requirements for Part 25 certification strongly preferred.
Highly self-motivated with a strong bias for action, and excellent problem-solving skills across multi-disciplinary skill sets.

The Structures Company, LLC is an AA/EOE.
 
Job Location: Reno, NV
Rate: Open
Per Diem: Yes
Overtime: Possible
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural & Payload Design Engineers - Many Needed

Description:
*BS Engineering Degree
*Catia V5
*Develops, Integrates and documents Structural & Interior Payload System requirements to establish system design.
*Aircraft Background

Email resume to: mmccarthy@pdstech.com
 
Job Number: BO-WA-Struct.
Job Location: Everett, WA
Rate: $69.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 6 Months+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineers - Many needed - Level 6

Description:
*BS Engineering Degree
*20+ Years Exp.
*Previous Aircraft Background
*Classical Methods for Structural Sizing of Traditional Airframe Primary Structure, metals & Composites
*Patran & Leader & Mentor

Email resume to: mmccarthy@pdstech.com
 
Job Number: Bo-WA-Stress 6
Job Location: Tukwila, WA
Rate: $88.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 6 Months+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis-Stress/DADT/Dynamics/FEA/FEM - Clearance CA

Description:
162964
1151-1 Engineering - Structural Analysis-Stress/DADT/Dynamics/FEA/FEM
Work Location: Palmdale, CA
Status: Open

Qty: 7
Desired Start Date: 12/18/2018
End Date: 12/7/2019

Job Description:
This position requires an Aircraft Stress Analyst to use their technical expertise to perform analysis of aircraft primary and secondary structure. The candidate will have a complete understanding of technical principles, theories and concepts in the field of aircraft structural analysis. The candidate will be expected to work independently with only general oversight and will be required to provide guidance to junior engineers. The candidate will be responsible for documenting work clearly and concisely.

The candidate will also be expected to use their technical expertise to develop structural analysis methods and perform structural analysis of advanced composite structures. Candidate must have working knowledge/experience with FEM software (Nastran or Abaqus), Computer Aided Design software (CATIA V5), and other pre/post processor software (Slim, Vision, etc.).

Work Location: Palmdale, CA
Level: Level 4: BS+16 YRS or MS+14 YRS
Pay Rate: $71.98 Hourly

Skills:
Software Skills Abaqus No 9 6 + Years
Software Skills Finite Element Analysis (FEA) No 9 6 + Years
Software Skills Nastran No 9 6 + Years
Technical Skills Stress Analysis Yes 9 6 + Years
 
Job Number: JE-1151-1S5
Job Location: Palmdale, CA
Rate: 71.98/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer

Description:
Global defense contractor is seeking an experienced Structural Design Engineer to perform the following:

• Structural Design Engineer to create designs for aircraft and land vehicle structural components, assemblies and installations.
• Candidate shall establish overall configuration based on requirements as defined by the customer and shall be able to design the structural components required to meet design specifications intent.
• Candidate shall be a mechanical, civil or aerospace engineering professional experienced in structural design, materials and processes, handling, and creation of designs/drawings per DoD100, BOM management, fastener selection, materials selection and finish requirements for a military environments.
• Candidate will interface with multi-discipline program team to support production of detail parts, and assemblies.
• Candidate will work design issues both independently and as part of a large multi-disciplined team.

Basic Qualifications for Structural Design Engineer:
Bachelor of Science degree in Mechanical Engineering or related Discipline with 7 years of experience in Structural Design or a M.S. Degree with 5 years of experience.
Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the required result, prioritize multiple responsibilities and/or accomplishing them simultaneously.
Strong familiarity with Siemens NX CAD solid modeling is required.
Prior experience with DoD/FAA aircraft or large land vehicles preferred.

Ability to Obtain and Maintain a Secret Security Clearance is required.
US Citizenship is required.
 
Job Number: 5760
Job Location: Baltimore, MD
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: 12+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: HEPCO INC
Attention: Tom Lee
Address: 160 PEHLE AVE STE 202
City, State: SADDLE BROOK, NJ 07663-5227
Phone: 201/843-4400
800 Phone: 800/656-0099
Fax Phone: 201/843-0025
Website: www.hepcoinc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer

Description:
Position Purpose:
The Structural Design group is responsible for providing an optimum design solution satisfying requirements for maximum inherent safety, performance in terms of weight and durability, and minimum cost of production and ownership. The group is involved with the current company fleet and new product development. This job is for placement in the Core team working on the Special Missions aircraft. Open to US citizens or permanent residents.

Unique Skills:
• Thorough understanding of structures design criteria including design loads and durability (fatigue and corrosion)
• Solid understanding of design and manufacturing processes involved for both metallic and composite parts with a focus on design for manufacturing and assembly (DFMA)
• Solid understanding of 3D Model Based Definition (3D MBD), and the application of Geometric Dimensioning and Tolerancing (GD&T) for details and assemblies
• Minimum 10,000 hours or 5 years of experience on CATIA v5 in primary Structural Design
• Proficiency in CATIA v5 workbenches: part design (machined parts), sheet metal, Fibersim, Composite Part Design (CPD), FT&A, Knowledge Based Engineering (KBE) tools including use of parameters, design tables, and Visual Basic macros
• Proficiency in CATIA v4 and in SmarTeam PLM database
• Experience with green aircraft structural modification
• Prior work experience with company aircraft design
• Experience with knowledge management processes

Responsibilities include:
• Develop structural definition of the aircraft by producing the form, fit, and function documentation from conceptual layouts to final detail design
• Engage various engineering, manufacturing and product support teams to complete designs
• Participate in design reviews
• Interact with suppliers and prepare technical coordination memos
• Prepare engineering reports
• Document, track and manage design projects of various magnitude using online knowledge bases and tracking tools
• Provide technical leadership and mentoring to junior engineers

Experience/Education:
• Minimum of a Bachelors Degree in engineering (AE, CE, ME)
• Minimum of 5 years of experience on primary airframe structure
 
Job Number: 24-349
Job Location: Savannah, GA
Rate: $64
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer

Description:
Seeking an Aircraft Structural Design Lead who will be responsible for leading all structural design activities. This position will be located in Reno, NV and report directly to the Structures Manager.

Qualifications:
• Build and Lead all parts of Aircraft Structural Design organization
• Strong knowledge and understanding of latest structural design as well as manufacturing trends in the Aerospace industry
• Previous experience with Conceptual design is a must.
• Analyzes the applicability of new and emerging technologies and advanced techniques.
• Serve as the primary design focal between company program, Tier 1 supplier and regulatory authorities
• Thorough understanding of the structural design requirements for Part 25 certification
• Provide technical leadership in design and development of the preliminary structures layout that meets weight, cost, manufacturability and certification requirements
• Develop schedule, cost and supplier management milestones
• Support new business development, trade studies and proposal activities.
• Support the structures team in development of the PSP, PSCP, issue papers, and other certification documents.
• Support technical review of supplier capabilities to facilitate source selection.

Client places a premium on problem-solving abilities and innovative thinking.

Requirements:
• Must be either a US citizen, a US permanent resident (a “US Person”) or a Canadian citizen.
• Minimum Bachelor’s Degree in Engineering. Master’s Degree strongly preferred
• 12+ years of experience in performing design of large aerospace structures.
• 3+ years of leadership experience on the aircraft development program
• Knowledge of the conceptual and preliminary design phases of aircraft development is strongly preferred
• Must have demonstrated leadership capabilities
• Experienced in dealing with and influencing internal and external stakeholders
• Highly self-motivated with a strong bias for action, and excellent problem-solving skills across multi-disciplinary skill sets
 
Job Number: 42-011
Job Location: Reno, NV
Rate: DOE but competitve
Per Diem: YES
Overtime: YES
Duration: 1 year+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer

Description:
Location: Savannah, GA
Pay Rate: $64.00/HR
Duration: 6 Month Contract

****Must be a U.S. Citizen or Permanent Resident****

Job Description:
-The Structural Design group is responsible for providing an optimum design solution satisfying requirements for maximum inherent safety, performance in terms of weight and durability, and minimum cost of production and ownership.
-The group is involved with the current Company fleet and new product development.
-This job is for placement in the Core team working on the Special Missions aircraft.

Qualifications:
- Thorough understanding of structures design criteria including design loads and durability (fatigue and corrosion)
- Solid understanding of design and manufacturing processes involved for both metallic and composite parts with a focus on design for manufacturing and assembly (DFMA)
- Solid understanding of 3D Model Based Definition (3D MBD), and the application of Geometric Dimensioning and Tolerancing (GD&T) for details and assemblies
- Minimum 10,000 hours or 5 years experience on CATIA v5 in primary Structural Design Preferred
- Proficiency in CATIA v5 workbenches: part design (machined parts), sheet metal, Fibersim, Composite Part Design (CPD), FT&A, Knowledge Based Engineering (KBE) tools including use of parameters, design tables, and Visual Basic macros
- Proficiency in CATIA v4
- Proficiency in SmarTeam PLM database
- Experience with green aircraft structural modification
- Prior work experience with Company aircraft design
- Experience with knowledge management processes

Competencies:
- Strong interpersonal skills and ability to work in a team environment and across disciplines
- Ability to communicate technical findings and recommendations clearly
- Humility, be a team player, help teammates
- Passion for Structural Design work

Responsibilities include:
- Develop structural definition of the aircraft by producing the form, fit, and function documentation from conceptual layouts to final detail design
- Engage various engineering, manufacturing, and product support teams to complete designs
- Participate in design reviews
- Interact with suppliers and prepare technical coordination memos
- Prepare engineering reports
- Document, track, and manage design projects of various magnitude using online knowledge bases and tracking tools
- Provide technical leadership and mentoring to junior engineers
 
Job Number: 10355
Job Location: Savannah, GA
Rate: $64.00/HR
Per Diem: Split Possible
Duration: 6 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Stress Analysis Engineers II, III, & IV- (WA)

Description:
***Several openings in the Seattle/Everett, WA areas***

Experience with aircraft structures, analytical skills, design/produce process, engineering analysis and/or design/test/certification regulations is essential. Work location is in various Puget Sound locations.

Leads development, integration and documentation of structural requirements to establish the system design. Coordinates with other engineering groups to establish the product's environment. Guides product design and verifies structural integrity by using and developing analytical methods, finite element models/simulations and other analysis tools throughout the product lifecycle to develop the structural environment, characteristics and performance. Leads development of test plans and configurations, supports test execution and analyzes/reports test results to validate and verify systems and components meet requirements and specifications. Defines and documents certification and test results to substantiate for customers and regulatory agencies that requirements are satisfied. Supports in-service products by leading investigations into failures and analyzing improvements. Develops analytical processes/tools to improve effectiveness, quality and efficiency of the development effort.

• Must have at least a Bachelor of Science Degree in Aeronautics/Aerospace, Mechanical, or Civil Engineering. Bachelor, Master or Doctorate of Science degree from an accredited course of study. ABET is the preferred, although not required, accreditation standard.
• Must be a U.S. Citizen
• Must have 9 or more years experience in structural or mechanical systems analysis or finite element analysis
• Significant experience with stress, fatigue, and/or damage tolerance analysis on primary structural components or mechanical systems
 
Job Number: StressWA
Job Location: Seattle, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structures Lead

Description:
Currently looking for an experienced Senior Level Structural Engineer to to fill an opening with a company located in Moses Lake, WA. Interested candidates should have at least 10 years exposure to flight test and another 5-10 years of aviation based experience in an engineering environment.


Responsibilities of the Structural Engineer Lead


Discuss, review and participated in airplane structural and system modification plans and preparation activities.
Resolve technical issues relating to structural and system installation.
Support Maintenance Engineering teams during modification periods.
Generate structural and system installation change modification drawings.
Ensure on-time Engineering deliverables to support flight test schedule.
Lead and oversee the technical and design aspects for structures/systems installation.
Troubleshoot and problem solve any issues that arise.









Requirements
10+ years of test flight or certification experience.
5-10 years of aerospace engineering experience.
Good understanding of aircraft systems and operations.
Future-oriented in thinking and operation.
Ability to successfully contribute to a positive and productive work environment.
Able to instil a sense of urgency in team members.
Able to be patient and objective in difficult situations with different types of people.
Strong analytical skills, with an ability to troubleshoot, problem-solve and effectively and efficiently make decisions.
Strong communication skills (oral, written, presentation).
Good project management skills, including the ability to take ownership for accomplishing assigned tasks.
Results-oriented planner and delegator who ensures that goals are met. Able to set priorities and keep to projected schedules.
 
Job Location: Moses Lake, WA
Per Diem: Possible
Overtime: Yes
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structures MRB Engineer

Description:
Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Unique Skills:
• Bachelors degree in Aerospace or Mechanical Engineering.
• Minimum 10 years dedicated Structures MRB Engineering experience at a recognized Aerospace Manufacturer.
• Experience should include creation and justification of engineering dispositions for nonconformance’s of composite and metallic, pressurized and non-pressurized aircraft structures.
• Experience should include all components of the aircraft (Wing, Fuselage, Empennage).
• Experience should be in a Production and/or schedule-driven environment.
• Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
• Strong written/verbal communication and interpersonal skills.
• Must be computer literate (such as, but not limited to: Catia V5, Solumina, SmarTeam, Word, Excel)
• Initially 1st shift. Occasional 2nd shift and weekend shift support may be required.

Principle Duties and Responsibilities:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
• Perform other duties as assigned.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Other Requirements:
• Advanced degree in engineering, or related curriculum preferred.
• The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 24-352
Job Location: Savannah, GA
Rate: $65-$70
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structures MRB Engineer

Description:
Required Skills:
- Bachelors degree in Aerospace or Mechanical Engineering.
- Minimum 10 years dedicated Structures MRB Engineering experience at a recognized Aerospace Manufacturer.
- Experience should include creation and justification of engineering dispositions for nonconformances of composite and metallic, pressurized and non-pressurized aircraft structures.
- Experience should include all components of the aircraft (Wing, Fuselage, Empennage).
- Experience should be in a Production and/or schedule-driven environment.
- Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
- Strong written/verbal communication and interpersonal skills.
- Must be computer literate (such as, but not limited to: Catia V5, Solumina, SmarTeam, Word, Excel)
- Initially 1st shift. Occasional 2nd shift and weekend shift support may be required.

Education and Experience Requirements:
- Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
- 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
- Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
- Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services

Principle Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
2. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 10742
Job Location: Savannah, GA
Rate: $65.00 - $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structures MRB Engineer

Description:
Structures MRB Engineer has minimum 10 years dedicated Structures MRB Engineering experience at a recognized Aerospace Manufacturer. - Experience should include creation and justification of engineering dispositions for nonconformances of composite and metallic, pressurized and non-pressurized aircraft structures. - Experience should be in a Production and/or schedule-driven environment. - Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment. - Strong written/verbal communication and interpersonal skills. - Must be computer literate (such as, but not limited to: Catia V5, Solumina, SmarTeam, Word, Excel) - Typically a 40-hr. work week, with some week/weekend OT.
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Company products and services


Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs. in specific technical discipline or 15 yrs. broad Eng. experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
System Stress Analyst - EBU/Thrust Reverser Experience

Description:
Stress Analyst with 10+ years of experience working with Translating Thrust Reversers.

• Responsible for analysis of Thrust Reverser Actuation System, Anti-Ice Valve and ducting Systems.
• Must have prior EBU experience.
• Experience with Gulfstream and Airbus aircraft preferred.
• Full understanding of the design sequence for translating thrust reversers.
• Experience performing preliminary analysis in preparation of program bids.
• Experience with free-body diagrams and classical stress analysis techniques
• Hands-on experience with FEMAP a plus, but not mandatory
• Excellent verbal and written communication skills
• Excellent organizational and problem-solving skills
• Excellent computer skills, including Outlook, Word, Excel and PowerPoint

Educational Requirements
Bachelor’s degree from an accredited institution, with a concentration in a relevant Engineering discipline





The Structures Company is an AA/EOE.
 
Job Number: 293
Job Location: OK
Rate: $85-$85/Hr. *DOE*
Per Diem: Yes
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Design Engineer

Description:
Location: Palmdale, CA
Rate: DOE
Duration: 1 year contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years with your last investigation being with 5 years****

Job Description:
- This position is for a Systems Design & Installation Engineer.
- A successful candidate will have a complete understanding of the technical principles, theories and concepts to integrate systems that include some, but not all of the following systems: avionics, fuel, hydraulics, secondary power, landing gear and environmental control for advanced aircraft.
- The candidate will coordinate efforts across a wide range of functional organizations including Airframe Design, Quality Assurance, Planning, Tooling, Structural Analysis, Materials & Processes, Flight Sciences, Test and Manufacturing.

Responsibilities for this position include:
- Development, test, and validation of new and modified subsystem designs.
- Creation and/or modification of primary and secondary structure with 3-D CATIA models, assemblies and installations.
- Creation and or modification of system requirements, interface/supplier control drawings, performance specifications, system checkout procedures, statements of work, trade studies, and component/ground/flight test plans.
- Coordination with suppliers, internal and external integrated product teams, management and the customer.
- Technical engineering support for manufacturing, installation and testing at Lockheed Martin, external supplier facilities and the customer’s operating locations.
- The candidate may function in a project leadership role where they manage system performance, budget and schedule.

Education:
- Level 3: BS+9-15 YRS or MS+7-13 YRS
- 3-D CATIA experience required.
- Geometric Dimensioning and Tolerancing (GD&T) required.
- Systems Analysis & Design Skills preferred
- Stress Analysis experience preferred.
 
Job Number: 10720
Job Location: Palmdale, CA
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Design Engineer

Description:
Location: Palmdale, CA
Rate: DOE
Duration: 1 year contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years with your last investigation being with 5 years****

Job Description:
- This position is for a Systems Design & Installation Engineer.
- A successful candidate will have a complete understanding of the technical principles, theories and concepts to integrate systems that include some, but not all of the following systems: avionics, fuel, hydraulics, secondary power, landing gear and environmental control for advanced aircraft.
- The candidate will coordinate efforts across a wide range of functional organizations including Airframe Design, Quality Assurance, Planning, Tooling, Structural Analysis, Materials & Processes, Flight Sciences, Test and Manufacturing.

Responsibilities for this position include:
- Development, test, and validation of new and modified subsystem designs.
- Creation and/or modification of primary and secondary structure with 3-D CATIA models, assemblies and installations.
- Creation and or modification of system requirements, interface/supplier control drawings, performance specifications, system checkout procedures, statements of work, trade studies, and component/ground/flight test plans.
- Coordination with suppliers, internal and external integrated product teams, management and the customer.
- Technical engineering support for manufacturing, installation and testing at Lockheed Martin, external supplier facilities and the customer’s operating locations.
- The candidate may function in a project leadership role where they manage system performance, budget and schedule.

Education:
- Level 4: BS+16 YRS or MS+14 YRS
- 3-D CATIA experience required.
- Geometric Dimensioning and Tolerancing (GD&T) required.
- Systems Analysis & Design Skills preferred
- Stress Analysis experience preferred.
 
Job Number: 10721
Job Location: Palmdale, CA
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Design & Installations Engineers - Active Secret

Description:
*Must have Active Secret Clearance
*3-D Catia
*GD&T/Stress Analysis/Systems Analysis & Design Skills
*Complete understanding of the technical principles, theories and concepts to integrate systems that include some, but not all of the following systems: avionics, fuel, hydraulics, secondary power, landing gear and environmental control for advanced aircraft. The candidate will coordinate efforts across a wide range of functional organizations including Airframe Design, Quality Assurance, Planning, Tooling, Structural Analysis, Materials & Processes, Flight Sciences, Test and Manufacturing.
*Looking for Highly Qualified Candidates

Email resume to: mmccarthy@pdstech.com
 
Job Number: Lock-Systems
Job Location: Palmdale, CA
Rate: up to $160.00/hour
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Design & Installations Engineers - Active Secret

Description:
*Must have Active Secret Clearance
*3-D Catia
*GD&T/Stress Analysis/Systems Analysis & Design Skills
*Complete understanding of the technical principles, theories and concepts to integrate systems that include some, but not all of the following systems: avionics, fuel, hydraulics, secondary power, landing gear and environmental control for advanced aircraft. The candidate will coordinate efforts across a wide range of functional organizations including Airframe Design, Quality Assurance, Planning, Tooling, Structural Analysis, Materials & Processes, Flight Sciences, Test and Manufacturing.
*Looking for Highly Qualified Candidates

Email resume to: mmccarthy@pdstech.com
 
Job Number: Lock-Systems
Job Location: Palmdale, CA
Rate: up to $160.00/hour
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Design & Installations Engineers - Active Secret - Excellent Rates**

Description:
*Must have Active Secret Clearance
*3-D Catia
*GD&T/Stress Analysis/Systems Analysis & Design Skills
*Complete understanding of the technical principles, theories and concepts to integrate systems that include some, but not all of the following systems: avionics, fuel, hydraulics, secondary power, landing gear and environmental control for advanced aircraft. The candidate will coordinate efforts across a wide range of functional organizations including Airframe Design, Quality Assurance, Planning, Tooling, Structural Analysis, Materials & Processes, Flight Sciences, Test and Manufacturing.
*Looking for Highly Qualified Candidates

Email resume to: mmccarthy@pdstech.com
 
Job Number: Lock-Systems
Job Location: Palmdale, CA
Rate: up to $160.00/hour
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Design Engineer

Description:
The primary task for the person in this role will be to develop engineering definition for components and subsystems within the pressurized cabin of the aircraft. Engineers in this position will also be expected to review planned manufacturing procedures to ensure compliance with design specifications and intentions, support test definition for verification testing of components and subsystems, and manage components and subsystems through their full lifecycle.

• Works with Structural Design team to develop conceptual designs for primary and secondary composite structures
• Develops rapid prototypes for evaluation throughout design development process
• Develops 3D CAD models and 2D engineering definition for detail parts, assemblies, and installations
• Establishes manufacturing tolerances for production of structural components
• Develops and documents system requirements and interface constraints for components
• Coordinates with Analysis and Testing departments to ensure component performance in flight environments
• Supports test definition to verify that components and manufacturing processes meet design intent and engineering requirements
• Participates in the review, approval, and release process of engineering definition
• Supports creation and review of manufacturing plans to ensure compliance with design requirements and company processes
• Supports components throughout full lifecycle from prototype to final acceptance as well as modifications and repairs after installation
• Uses engineering judgment to evaluate manufacturing issues and disposition nonconformance reports (NCR)


Required:

• Education and Experience. Bachelor’s degree from an accredited institution, with a concentration in Aeronautical and Astronautical, Aerospace, or Mechanical Engineering.
• 3 years or more experience design engineering for aerospace composite fabrication and assembly processes
• Proficient with CATIA V5
• Required Workbenches: Part Design, Assembly Design, Sketcher, Drafting, Wireframe and Surface Design
• Desired Workbenches: Generative Shape Design (GSD), Composites (CPD) Experience using GD&T and ASME Y14.5M-1994 drafting standards
• Knowledge of manufacturing methods for various materials (composite layup, metal machining, 3D printing, bonded assembly, mechanical assembly)
• Experience designing for aerospace environments desired
• Experience in the development of human spaceflight hardware desired
• Experience with Product Lifecycle Management (PLM) software and configuration management processes
• Excellent analytical and decision-making skills
• Excellent verbal and written communication skills Excellent organizational and time-management skills Strong team player
• Proficient in Microsoft Office: Word, Excel, PowerPoint, Outlook


The Structures Company is an AA/EOE.
 
Job Number: 303
Job Location: CA
Rate: $65-$75/Hr. **DOE**
Per Diem: Yes
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

Job Description:
- Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems.
- Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal.
- Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints.
- Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications.

- Our client is looking for world class talent in SYSTEMS INTEGRATION AND TEST ENGINEERING to be a part of a team that will carry on our tradition making history in advanced aircraft development.
- Candidate will support a team responsible for the integration and test of Mission Systems capabilities and functions in a laboratory, flying test bed, and flight test environment.
- Utilizing mission systems requirements, the candidate will assist in the development of test requirements and procedures execute integration and test activities in a lab environment, evaluate mission systems functionality in a flying test bed, and support mission systems flight test evaluation.
- Candidate must have strong technical background, excellent communication and interpersonal skills, in-depth understanding of military aircraft functionality, and demonstrated integration and test experience with modern software intensive mission systems architecture.
- Must be a US Citizen; this position will require a government security clearance.
- This position is located at a facility that requires special access.

Skills Needed:
- Read Engineering Drawings and Parts List
- Capture data digitally from parts lists and excel spreadsheets to form new lists
- Conduct meetings for changes to hardware allocations, tracking and reporting
- Project Planning, Architecture, Functional Allocations
- MS Excel, linking and pivot tables

Attributes:
- Good attitude about work and working with others
- Attention to detail
- Good communication skills
- Team player
- Initiative and ability to work
- Passion for detail and getting the job done in a timely fashion
- RF Testing experience
- Experience with harness design and fabrication
- Experience with hardware configuration management

Education:
- Level 3: BS+9-15 YRS or MS+7-13 YRS
- Will accept experience in lieu of degree
- Manager will consider both 2 and 3 level candidates.
- Must have Aviation/Aerospace experience
- Experience Writing/Testing/Integrating/Developing Software for Imbedded and C++ required
 
Job Number: 10789
Job Location: Palmdale, CA
Rate: $90.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer - Clearance CA

Description:
1475-1 Systems Engineer
Work Location: Palmdale, CA
Status: Open

Systems Engineer
Qty: 5
Desired Start Date: 4/15/2019
End Date: 10/31/2019

Job Description:
Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems. Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications.

The Skunk Works is looking for world class talent in SYSTEMS INTEGRATION AND TEST ENGINEERING to be a part of a team that will carry on our tradition making history in advanced aircraft development. Candidate will support a team responsible for the integration and test of Mission Systems capabilities and functions in a laboratory, flying test bed, and flight test environment. Utilizing mission systems requirements, the candidate will assist in the development of test requirements and procedures, execute integration and test activities in a lab environment, evaluate mission systems functionality in a flying test bed, and support mission systems flight test evaluation. Candidate must have strong technical background, excellent communication and interpersonal skills, in-depth understanding of military aircraft functionality, and demonstrated integration and test experience with a modern software intensive mission systems architecture. Must be a US Citizen; this position will require a government security clearance. This position is located at a facility that requires special access.

Bachelor's or above in a Technical Engineering Discipline

Skills Needed:
• Read Engineering Drawings and Parts List
• Capture data digitally from parts lists and excel spreadsheets to form new lists
• Conduct meetings for changes to hardware allocations, tracking and reporting
• Project Planning, Architecture, Functional Allocations
• MS Excel, linking and pivot tables
Attributes
• Good attitude about work and working with others
• Attention to detail
• Good communication skills
• Team player
• Initiative and ability to work
• Passion for detail and getting the job done in a timely fashion
• RF Testing experience
• Experience with harness design and fabrication
• Experience with hardware configuration management

Manager will consider both 2 and 3 level candidates.
Will accept experience in lieu of degree
Must have Aviation/Aerospace experience
Experience Writing/Testing/Integrating/Developing Software for Embedded and C++ required

Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
Pay Rate: $75.00 Hourly
 
Job Number: JE-1475-1S
Job Location: Palmdale, CA
Rate: 75/hr
Duration: 6 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Stress Analyst

Description:
Location: Savannah, GA
Rate: $75.00 - $80.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
- Experience in metallic door structures and mechanism analysis is highly desired.
- Experience in support of design and development of mechanical systems is desired
- 5 years minimum aircraft stress experience required.
- Static and fatigue analysis of primary and secondary airframe structure of metallic or composite construction experience required.
- Strong background in classical stress analysis required.
- Experience with Catia V5 to support stress analysis and drawing release required.
- Experience with FEM analysis methods a plus but not required
- Experience in workflow review and approval process is a plus.

Education and Experience Requirements:
- Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
- Five (5) yrs in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors.
- Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principle Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering related field preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 10550
Job Location: Savannah, GA
Rate: $75.00 - $80.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Stress Engineer

Description:
• Experience in metallic door structures and mechanism analysis is highly desired.
• Experience in support of design and development of mechanical systems is desired
• 5 years minimum aircraft stress experience required.
• Static and fatigue analysis of primary and secondary airframe structure of metallic or composite construction experience required.
• Strong background in classical stress analysis required.
• Experience with Catia V5 to support stress analysis and drawing release required.
• Experience with FEM analysis methods a plus but not required
• Experience in workflow review and approval process is a plus.

Responsibilities:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area
• Actively works to improve daily processes and ensures all work meets customer requirements
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product

Experience/Education:
• Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Five (5) yrs in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
 
Job Number: 24-330
Job Location: Savannah, GA
Rate: $75 - $80
Per Diem: Yes
Overtime: Yes
Duration: 1 year+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Catia V5 Instructor

Description:
Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Unique Skills:
• CATIA v5 experienced with 5000+ hours. All Level 1 tools CATIA v5 (Part Design, Assembly, Drafting).
• Level 2 tools CATIA v5 Generative Surfacing, Free Style Shaping, Generative Sheetmetal, and Generative Stress Analysis.
• Other tools: CATIA v5 Composites, Electrical EHI, Capitol Harness, Tubing experience a plus.
• Quantitative experience with Geometric Dimensioning and Tolerances a plus.
• Experience working within PDM systems such as Enovia, SmarTeam or NX/Teamcenter.
• Formal Classroom instruction experience required for CATIA and PDM.

Education and Experience Requirements:
• Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Principal Duties and Responsibilities:
• Ideal Candidate will primarily teach, assist and mentor employees with CATIA v5 and SmarTeam.
• Candidate will support Engineers and be expected to answer questions intelligently in a class setting.
• This candidate will primarily be on location in Tulsa and be expected to travel back and forth to Savannah and sub tier supplier sites to support Gulfstream Oklahoma.
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area
• Actively works to improve daily processes and ensures all work meets customer requirements
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
• Advanced degree in engineering related field preferred
• The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 24-346
Job Location: Tulsa, OK
Rate: $60/hr
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tech Spec II - Equipment and Furnishings

Description:
Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Unique Skills:
The ideal candidate for the Mechanical Systems Engineer (TS II) opening at Gulfstream should have the following experience but not required:
• Prior experience in Mechanized systems such as Doors, Equipment and Furnishings, Flight Control or Landing Gear. Prior Gulfstream experience is desired.
• Must have experience with Catia V5, Smarteam Database, Surfacing & Kinematics is highly desired.
• Past experience with Secondary Structure and Machined parts with Model Base Definition and GD&T proficient.
• 14 CFR Part 25 A/C Cert familiarity
• Mechanical Systems Engineering experience required. ARP4754A experience desired.
• Catia V5, Smarteam Database, Surfacing and Kinematics Highly Desired.

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
• 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Principle Duties and Responsibilities:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
• Perform other duties as assigned.

Other Requirements:
• Advanced degree in engineering, or related curriculum preferred.
• The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 24-343
Job Location: Savannah, GA
Rate: $63
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Illustrator

Description:
Technical Illustrator (L3 – Senior)

Location: Shelton, CT



The Senior Technical Illustrator works within the Graphics department to create and revise graphics for technical publications. The Senior Technical Illustrator works in conjunction with the technical writing teams to create or revise illustrations, in accordance with graphic specifications. The illustrator receives source material from the writers in various forms that include, but are not limited to, referenced graphics, rough sketches, models, photographs, and engineering drawings. The illustrator is able to read and correctly interpret engineering drawings and models, and translate the source data into the necessary views and details in an illustration. The illustrator creates or revises illustrations according to direction provided on the source material in a timely manner to support delivery schedules. Such graphics include, but are not limited to, component assembly/installation, schematics, block diagrams, flow charts/trouble trees, and exploded views.



Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this job.



Develop technical illustrations from markups, engineering documentation, and other technical source material.
Develop technical illustrations in accordance with governing specifications.
Update and maintain different file formats for incorporation into multiple platforms.
Perform with minimal supervisory input/guidance.


Technical Skills, Knowledge and Abilities of the following software and graphics field



CAD 2D (Autotrol TI 14.1, Arbortext ISODraw, Corel DESIGNER)
CAD 3D (Right Hemisphere/SAP Visual Author)
Adobe Creative Suite (Illustrator, Photoshop)
Experience with PLM or engineering workflows
Expert with graphic specifications, processes, and workflows for the various types of graphics to be created.
Expert with different file format specifications for incorporation into various platforms
Hot-spotting
Blueprint and engineer drawing reading
Demonstrated aircraft and/or mechanical aptitude and the ability to apply this knowledge to create accurate and complex technical illustrations.


Interpersonal and Communication Skills



Communication proficiency with written and verbal English and in-depth knowledge of engineering and other technical terminology
Professional communication proficiency to interact effectively with coworkers, supervisor, managers, and customers.
High level of complex problem solving and analytical skills
Ability to dissect complex and interdependent processes into discrete and detailed steps to enhance end-users ability to understand and follow the directions.
Ability to work collaboratively with others in a tight-knit team environment.
Organizational skills
Time management skills
Must be able to demonstrate Initiative and be self-motivated
Detail orientation
Work products must be very thorough
Task and goal-orientation
Quality-driven and able to self-edit written and graphical work
Manage multiple jobs with tight deadlines in fast-paced and dynamic environment
Responsive and time-sensitive to technical writers’ delivery schedule
Strong, customer-focused work ethic and positive attitude
Able to mentor less experienced and knowledgeable writers on the team.

Graphics Related Requirements



2D isometric drawings (e.g., line drawings, exploded views, cutaway views)
Schematic diagrams
Block diagrams
Avionic trouble trees
Intelligent (hot-spotted) graphics
IsoView-enabled schematics
Infographics





This job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopier/printers/fax machines.







The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.



While performing the duties of this job, the employee is regularly required to talk and listen. The employee frequently is required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms.

• This is a full-time Exempt position requiring a 40-hour work week.

• Occasional overtime and possible weekend work are also required to meet customers’ needs.

• Flex time for arrival at the office is between 5:00 am and 9:00 am, but the employee must be available during the “core” work hours of 9:00 a.m. to 3:00 p.m. This is a rigid and unique customer requirement that existed and was explained at the time of hire. Due to national security related needs, all work must be performed onsite in a double secured office.

No regular travel is expected for this position. Travel on rare occasion may be required to support validations.



Previous drafting, CAD/CAM experience
Bachelor’s Degree in Graphic Design, Visual Communications, Computer Graphics, Multimedia, or Illustration, and equivalent experience
Read and interpret graphics markups, engineering drawings and various forms of source data
5 - 6 years of technical illustration experience, preferably in the helicopter or aerospace industry
Some small project management skills and experience
Work authorization: No foreign nationals. Much of the work is indirectly working on U.S. government contracts.
Security clearance: None is required from the US government, however, the customer requires passing a more in-depth background check.


Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.



____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 56579
Job Location: Shelton, CT
Per Diem: Possible
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: David Surreira
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Writer

Description:
IPC experience preferred. Completions Illustrated Parts Catalog special project
Four (4) years Technical Publications writing experience. Three (3) years of Standard Graphic Markup Language (SGML) or SGML-related software applications experience required.

Responsible (either individually or with other team members) for the writing of major portions of technical publications. Supports the complete workflow process to ensure successful completion of each revision cycle and distribution of technical publications. Complies with established quality processes to ensure accuracy, ease of use and timely delivery of each revision cycle content.

Write technical publications content as directed. Conduct reviews and analyze technical documents to gain a thorough understanding of how complex systems operate and how they are to be integrated into technical manuals to provide the end user with the level of text and graphics to support the efficient return to service of the aircraft system. Consult with internal, external customers and Engineering to create/revise technical manuals to support the department/corporate operating priorities. Provide input to management on new processes or technology for integration into the technical publications business model. Assist in developing solutions for overcoming the technology/technical issues introduced by outside suppliers for incorporation into existing manuals. Work with management, other departments, and team members in the development of specific project data. Provide liaison with Completion Center, Technical Operations, Production and/or Completion Engineering, Service Center to obtain the necessary approval for technical information prior to its release to customers. Participate with publications team to ensure all internal department workflows and business processes are followed for issues relating to producing and delivering technical publications and associated Computerized Maintenance Program (CMP) data. Work with internal/external customers in the development of specific project requirements of source data to ensure a seamless incorporation of new data in the publications environment. Perform other duties as assigned.
 
Job Number: 18-826-139424
Job Location: GA
Per Diem: Split
Overtime: Possible
Duration: Possible Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Writer

Description:
Write supplemental Instructions for Continued Airworthiness (ICA) [aircraft maintenance manuals, illustrated parts catalogs, crew operating manuals, etc.] in support of receiving a supplemental type certificate (STC) for a modified aircraft. Interpret mechanical system and electrical engineering drawings as well as substantiation and test reports in order to write the supplemental ICA.
 
Job Number: 18-824
Job Location: COLLEYVILLE, Midwest
Per Diem: Yes
Overtime: Possible
Duration: Possible Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Thermal and Anti-Ice Engineer

Description:
• Thermal and Anti-Ice Engineer will be responsible for developing the subsystems requirements, architectures, roadmaps, and overall development of the subsystem from concept through certification.
• The candidate must be a subject matter expert in the relevant subsystem and have a thorough technical understanding of development of the subsystem.
• The candidate will be knowledgeable of FAR 25 certification requirements for the subsystem and subsystem components.
• Thermal and Anti-Ice Engineer will be responsible for the design of the relevant subsystems of the AS2 supersonic business jet to meet market and certification requirements.
• The successful candidate will have a commanding and fundamental understanding of how to design, analyze, and certify the relevant subsystem and have expert level knowledge of system integration into the aircraft.
• The candidate should be regarded as the technical subject matter expert for the relevant subsystem.

Basic Qualifications:
• BS degree or higher in mechanical/aerospace engineering.
• Minimum of seven years senior level technical experience in Thermal and Anti-Ice design and certification required.
• Experience with design and certification of FAR 23 or FAR 25 subsystems required.
• Strong technical, interpersonal, communication, administrative, and presentation skills. Demonstrated leadership in solving technical challenges.
• Significant experience on aircraft design teams, from concept through certification, in a collaborative multi-discipline team environment.
 
Job Number: 42-006
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Weight Engineer

Description:
We are seeking an experience Weight Engineer to fill an opening for a company in Seattle, WA. Interested candidates should have aircraft certification experience in relation to weight and center of gravity in addition to flight test experience.

The responsibilities of the Weight Engineer:
Management of the aircraft weight & C.G.
Aircraft weight reduction activity and design weight growth study.
Certification activity related to weight and C.G.
Support of the sales, marketing, customer support, flight test, ground test and manufacturing tooling/process related to weight and C.G.
Check the status and forecast of aircraft weight and C.G.
Gathering the weight data / information of system and structure components from design team of MITAC and suppliers
Check the status weight of system and structure component vs target weight
Design weight growth plan
Determine or revise the design weight and C.G. envelope
Preparation of weight report and mass data for analysis, tests and manufacturing tooling / process
Preparation of weight and balance manual
Measurement of the aircraft, major assemblies, components
Improvements of weight data gathering and verification process
Prepare presentation materials and/or attend the meeting or discussion with aviation authorities.


Requirements
Aircraft certification experience in relation to weight and center of gravity.
Extensive flight test experience.
Four (4) year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation).​

 
Job Location: Seattle, WA
Per Diem: Possible
Overtime: Yes
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wing and Anti-Ice Design Engineer

Description:
The Designer for Wing and Engine Anti-ice is responsible for providing design expertise in support of Wing and Engine anti-ice systems through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
1. Prepare 3D layout models of the Wing and Engine Anti-ice Systems.
2. Prepare 3D installation and detail models of the Wing and Engine Anti-ice Systems.
3. Prepare 2D installation, assembly and detail drawings of the Wing and Engine Anti-ice Systems.
4. Work in a team environment supporting liaison engineering to research root cause and address production discrepancies.

Education, Work Experience, Certification and/or Licensure:
Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program with 5+ years of directly related design experience in the development and certification of aircraft Wing and Engine Anti-ice Systems.

Knowledge, Skills and Abilities:
1. Experience using CATIA V5 to prepare 3D parametric models and 2D drawings. Minimum of 10,000 hours.
2. Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
3. Knowledge of 14CFR23 or 25 regulations and advisory circulars related to Wing and Engine Anti-ice Systems regulations required.
4. Knowledge of Aircraft Wing and Engine Anti-ice Systems
 
Job Number: 28-039
Job Location: Greensboro, NC
Rate: Up to $75/hr, DOE
Per Diem: YES
Overtime: YES
Duration: Long Term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wing and Engine Anti-Ice Systems Designer

Description:
General Summary:
The Designer for Wing and Engine Anti-ice is responsible for providing design expertise in support of Wing and Engine anti-ice systems through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.


Duties and Responsibilities:
• Prepare 3D layout models of the Wing and Engine Anti-ice Systems
• Prepare 3D installation and detail models of the Wing and Engine Anti-ice Systems
• Prepare 2D installation, assembly and detail drawings of the Wing and Engine Anti-ice Systems
• Work in a team environment supporting liaison engineering to research root cause and address production discrepancies


Education, Work Experience, Certification and/or Licensure:
• Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program
• 5+ years of directly related design experience in the development and certification of aircraft Wing and Engine Anti-ice Systems

Knowledge, Skills and Abilities:
• Experience using CATIA V5 to prepare 3D parametric models and 2D drawings
• Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
• Knowledge of 14CFR23 or 25 regulations and advisory circulars related to Wing and Engine Anti-ice Systems regulations required
• Knowledge of Aircraft Wing and Engine Anti-ice Systems





The Structures Company is an AA/EOE.
 
Job Number: 302
Job Location: NC
Rate: OPEN - **DOE**
Per Diem: Yes
Overtime: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wire Design & Install Engr 5

Description:
Wire Design & Install Engr 5

Location: Oklahoma City, OK
Duration: 6 months

Job Description:
OKC Electrical Harness/Cable Group is seeking senior electrical harness/cable engineers. The candidate will mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for client Military Aircraft, Military Derivative Aircraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, B-1B, B-2, B-52 and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft harness/cable design on the various platforms.

Other job responsibilities may include
- Provides guidance in the development of cable/wire harness detail and assembly designs.
- Provides guidance in the development of electrical product detail, assembly and installation designs.
- Provides direction used by multiple teams to analyze complex results and performs design reviews.
- Provides guidance in engineering design disposition on discrepancies. Defines processes, specifications and procedures that support the design and manufacture of electrical commodities.
- Provides direction used by multiple teams to develop complex statements of work, metrics, schedules and budgets.
- Directs the technical review of supplier capabilities to facilitate source selection.
- Directs the development of functional and physical design requirements to ensure complete integrated design architecture.
- Works under consultative mentorship

Must possess good organizational, interpersonal, and problem solving skills. Must have demonstrated a strong work ethic and sense of urgency for completing assigned work with a history of meeting commitments. Ability to adjust priorities to multiple demands and unanticipated events.

Client is the world's largest aerospace company and leading manufacturer of commercial airplanes and defense, space and security systems. We are engineers and technicians. Skilled scientists and thinkers. Bold innovators and dreamers. Join us, and you can build something better for yourself, for our customers and for the world.

Skill Code:
652-Wiring Design
 
Job Number: 19-03721
Job Location: Oklahoma City, OK
Per Diem: split
Overtime: possible
Duration: 6 months
Start Date: 3/29/19
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 859 STEPHENSON HWY
City, State: TROY, MI 48083
Phone: 843/955-9221
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wire Harness Designer

Description:
Description
Produce wire harness assembly (formboard) drawings
Produce wire harness manufacturing instructions
Produce wire harness termination drawings
Produce wire harness installation instructions

Qualifications:
Strong understanding of wire harness manufacturing process and formboard drawings
Strong understanding of electrical schematics & termination drawings
Experience working with electrical designers during schematic creation
Experience integrating wire harnesses in vehicle
Extensive knowledge of aircraft-type wiring and components such as connectors, backshells, conduits, relays, switches, terminal junction system components, etc.
Catia V5 Electrical Workbench is a plus
Experience with Mentor Graphics is a plus
Experience with composites is a plus
Must have a B.S. Engineering degree from an accredited university

The Structures Company is an AA/EOE.
 
Job Number: 267
Job Location: CA
Rate: Up to $65/Hr. **DOE**
Per Diem: Yes
Overtime: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Back to Advanced Job Search