Job Search Results382 listings were found that matched your search words: Keywords: Electronic ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2025/07/01 Tuesday 08:54PM Pacific Time by ContractJobHunter. )Listings 1 - 382 |
|||
| Go To My Job Tracker | |||
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
6 Non-Destructive Test (NDT/NDI) Level II Needed
Seeking aviation/aircraft non-destructive test (NDT/NDI) Level 2
MUST BE US PERSONS
MUST have successfully completed minimum training requirements defined in NAS 410, ATA 105, or ASNT-SNT-TC-1A for a Level 2 inspector in UT and PT.
• Responsible for accomplishing assigned inspection work on space flight system hardware, assemblies and vehicles.
• Conducts inspections utilizing a variety of NDT methods which may include but are not limited to ultrasonic, penetrant, x-ray, eddy-current, and thermal/infrared and laser shearography.
• Properly utilize NDT test equipment and associated tools to successfully interrogate hardware and structures, make decisions as to their acceptability for continued use and keep abreast of new and advanced test equipment.
• Operate manual and automated NDT equipment.
• Shall be required to document inspection results in both paper and electronic forms as well as complete and sign work records in connection with work performed.
• Inspects parts, sub-assemblies and completed assemblies to the extent necessary to determine, accomplish and approve acceptability in accordance with written procedures.
• Will be required to, but not limited to be working on check aircraft.
• Assist with development of procedures and techniques for non-destructive testing of metallic and composite structures.
• Support training of other NDT personnel using hands-on knowledge from the vehicles via different mediums as appropriate.
• Excellent attendance, ability to work overtime, and other shifts as required.
REQUIREMENTS
• Must have successfully completed minimum training requirements defined in NAS 410, ATA 105, or ASNT-SNT-TC-1A for a Level 2 inspector in UT and PT. Training in other NDT methods is desirable.
• Must have recent, documented hours, working as a NDT inspector and have obtained sufficient experience to be certified in accordance with NAS 410, ATA 105, or ASNT-SNT-TC-1A.
• Must have strong working knowledge of composite aircraft and/or aerospace non-destructive testing processes in composite material.
• Ability to conduct inspections with limited supervision.
• Minimum 5 years aviation/aerospace industry experience desired.
• Excellent computer skills. Skilled in working in Microsoft Office applications.
• Experience on narrow body and/or business jet aircraft preferred.
• Experience with composite aircraft is preferred although not required (commercial or military aerospace application).
• Must display maturity of action and judgment.
• Must be able to work under pressure and thrive in a fast-paced environment.
• Good communication skills.
• Ability to read, interpret, and communicate blueprints, specs, and other technical documents.
Physical and/or Additional Requirements
• Perform physical requirements of the position, including use of inspection hand tools, NDT equipment, lift up to 50 lbs., pass eye examination.
• Willing to work overtime, all shifts, travel and be on-call as necessary.
The Structures Company LLC is an AA/EOE.
Job Location: Mojave, CA
Rate: **DOE**
Per Diem: Yes
Overtime: Possible
Duration: 8+ Months
Start Date: ASAP
Input Date: 06/10/2025
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Account Operations Assistant
An Account Operations Assistant 1 position in West Palm Beach, Florida is currently available with Belcan. To be considered for this role the candidate is responsible for all administrative support duties pertaining to the Customer Business Lead, including updating weekly reports, data mining and data entry, managing multiple inboxes, meeting arrangement, and taking meeting notes.
Description:
Provides administrative assistance to the Customer Business Lead. This position supports the Business Lead with administrative tasks, analysis of data, and business coordination activities. Must be highly analytical, self-driven and detailed oriented. Works independently and acts on routine matters in the absence of the supervisor. Communicates and collaborates extensively across multiple Belcan locations and functional disciplines. Works on analytical and business-related projects as assigned.
Essential Functions:
* Responsible for all administrative support duties pertaining to the Customer Business Lead, including updating weekly reports, data mining and data entry, managing multiple inboxes, meeting arrangement, taking meeting notes, following up on meeting actions.
* Prepare and maintain organizational reports and records, with follow-up on pending matters as appropriate.
* Coordinates and creates routine and ad hoc reports, presentations and correspondence as well as managing various sources of electronic information.
* Provide high level support in gathering, analyzing, and compiling data in charts and presentations (e.g. Weekly and Monthly Metrics Reports, etc).
* Coordinate / support other business-related projects as assigned.
Basic Qualifications:
* Associates Degree from an accredited institution required
* Minimum of 3 years office experience supporting mid to senior level managers.
* Must be legally authorized to work in the United States without company sponsorship.
* No relocation is offered for this position. Only candidates located within 50 miles of West Palm Beach, FL will be considered for the position.
Position Criteria:
* Very strong Excel skills required.
* Must be proficient in other Microsoft Suite software to include: PowerPoint, Word and Outlook.
* Ability to compile and analyze data in order to determine trends and possible actions.
* Ability to multi-task, prioritize and complete requests and assignments in a timely manner.
* Ability to handle change in a fast-paced environment. Flexibility to deal with interruptions, changing priorities, and deadlines.
* Well developed skills in effectively and comfortably interacting with management, employees, internal and external customers, and outside contacts.
* Strong independent decision-making, problem-solving and collaborative skills.
* Detail oriented, well organized, and must work well in both a team and individual environment.
* Strong organizational and communication skills (written and verbal).
* Strong computer skills to quickly learn and utilize other computer software programs.
Preferred Qualifications:
* Bachelor's Degree from an accredited institution preferred.
Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.
Job Location: West Palm Beach, FL
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 06/10/2025
Attention: SarahVallejo
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Designer
Do you want to work for an Aerospace company on the forefront of technology? Are you a self-starter known for your partnership and communication skills, come join us as a Designer!
In this role, you will be using your skills and expertise to develop highly complex designs.
These cover a very wide range, from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems.
You'll create and review layouts, drawings, and models for clarity, completeness, and accuracy.
You'll identify design errors, omissions, and other deficiencies, and recommend revisions and/or improvements in designs
Must-haves:
Bachelor's Degree in a related field of study and typically 3 or more years of relevant experience
A higher level degree may substitute for experience
Related experience may be considered in lieu of required education
Understanding of engineering principles and practices
Experience with Computer Aided Engineering tools
Ability to work in multi-disciplinary design and development teams
Preferred:
Experience using SOLIDWORKS, Creo, NX, ProEngineer, AutoCAD, CATIA or Enovia 3Dxperience software.
Working knowledge of ASME and Government standards.
Background in the Aerospace & Defense Industry.
Prior experience applying and interpreting Geometric Dimensioning and Tolerancing (GD&T) per ASME Y14.5
Knowledge of industry-standard design principles, to include, but not limited to parametric design, model-based definition, material hardware and or electrical component selection, fabrication, manufacturing, and production processes
Familiarity with Electro-Magnetic Effects (EME) to include, Electro Magnetic Compatibility (EMC) and Electro-Magnetic Interference (EMI)
Experience in digital and analog circuit layout and schematic capture
Understanding of the printed circuit board layout process and tools
IMPORTANT NOTICE:
To conform to U.S. Government international trade regulations, applicant must be a U.S. Citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State or U.S. Department of Commerce.
Job Location: Denver, CO
Rate: $34/HR
Per Diem: Possible
Overtime: Possible
Duration: Long Term Contract
Start Date: ASAP
Input Date: 06/10/2025
Attention: Corey Halliday
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Electrician/Avionics Technician - HOT Job!
Very exciting opportunity to work with one of the world's largest aerospace companies!
The contracts are regularly extended and direct opportunities are often available.
Details:
Must be able to obtain a security clearance
Rotating shifts
Summary:
Assists in the performance of aircraft bench and/or flight line operational testing, troubleshooting, adjustment, repair and installation of any complex or non-complex aircraft electrical or electronic system in the testing development and modification of aircraft and related systems.
Perform assembly, installation, check-out physical characteristics, operational testing, and modification of wire bundles in the testing, development, and modification of aircraft in accordance with DOD, manufacturer, company supplier, and other directives.
Able to read and interpret schematics, assembly drawings, process specifications, technical manuals, written instructions, test procedures, etc.
Able to use common hand tools.
Able to perform close tolerance assemble operations.
Desired Skills:
Able to effectively communicate orally and written with other employees, members of supervision and others as required in their duties.
Able to clearly document maintenance and repair actions, equipment status tags, logs, parts requests, etc.
Able to perform assigned duties while wearing required safety equipment.
Able to perform assigned duties on all shifts without encumbrances due to weather or physical location and conditions.
Order parts, pan stock, tools, materials, and equipment as required to perform assigned duties.
Required Avionics knowledge for trouble-shooting during induction and delivery of all aircraft.
Responsible for complying with all rules and regulations concerning health and safety, FOD prevention, tool control, contracts, facilities, and other pertinent processes and procedures.
Responsible for the proper performance of assignments and the prudent handling of products, tools, and equipment.
Performs other duties as directed by supervisor and management for the benefit of the company, program, or employees.
About Us:
The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service.
We support the majority of aerospace OEM's and tier 1 suppliers across the United States.
We have a national medical, dental, and vision plan with United Healthcare, and we also have a robust 401K offering. In addition, there is potential for bonuses, sick pay, and holiday pay for those who qualify.
The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)
Rate: 38
Per Diem: Possible
Overtime: Possible
Duration: 6-12 mos
Start Date: ASAP
Input Date: 06/10/2025
Attention: Diego Villegas
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Mechanic II - Electrical
This mechanic maintains repairs and modifies aircraft electrical systems and electrical components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight control systems, engines, flight deck, routing, terminations, connector building and troubleshooting, applies technical knowledge of aircraft electrical systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as schematics or manufactures' manuals. Job requirements: must have a thorough knowledge of aircraft electrical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft repair, must have thorough knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, and bond meters. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects.
Job Description
Position Requirements:
• Perform connector terminations including shielded wires, coaxial cables, and fiber optic wiring.
• Ability and understanding of routing instructions and handling of harnesses.
• Perform efforts associated with sealing, wrapping, bonding, tying, and closure of wire harnesses and cables in accordance with standard processes.
• Demonstrates the capability to read and interpret engineering drawings, technical orders, process specification, and retrofit requirements to perform electrical modification/repair.
• Experienced in the use of tooling assemblies and fixtures for depot level modification and repair of electrical wiring.
• Adhering to government and company procedural guidance, performs assembly, installation, visual inspection of physical characteristics, modification of wire bundles & electrical assemblies, operational and quality checks of aircraft work.
• Troubleshoots malfunctions in aircraft electrical and comm/nav-systems of moderate difficulty at the organizational or depot maintenance level.
• Interpret standard work instructions, charts, tables, blueprints, wire diagrams, formulas, sketches, verbal and electronic orders, job layouts, etc. to accomplish assigned work.
• Ensure that all equipment is used in accordance with established safety and operating procedures.
• Perform all tasks involved in the coordination, preparation, and movement of material and tools.
• Operate riding type electric powered elevating equipment to accomplish work assignment.
• Maintain necessary certifications, licenses and permits as required for assigned work.
• Will be required to work with the guidance of more senior skilled employees and assist less senior employees.
• Perform all duties of lower Electrical classifications as required to successfully accomplish assignments.
• The candidate must be able to ascend and descend vertical work ladders, work in confined spaces, and lift loads of approximately 35 pounds.
• Must be able to work various shifts and/or an alternate baseline schedule that may frequently change to support mission requirements and may include weekends and holidays. Mission requirements and/or workload may require both scheduled and unscheduled overtime.
Job Location: SAN ANTONIO, TX
Rate: 35-40 HR
Input Date: 06/10/2025
Attention: Diego villegas
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler
This will be a req for a rack builder. Responsibilities will be, but not limited to, dressing large cables and subassemblies throughout a rack. Must be able to follow drawings and detailed planning's. Must route cables neatly and precisely throughout the build to deliver to military customers.
Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables. Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws. Makes continuity checks on work in process and completed. May conduct quality inspections on processing line in accordance with quality specifications. May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions.
Must have experience with rack building, cable and subassembly routing, reading drawings and plans
Job Location: Orlando, F L
Rate: 19
Per Diem: Split
Duration: 12 mos
Start Date: ASAP
Input Date: 06/10/2025
Attention: Venkat Manta
Address: 687 LEE RD STE 350
City, State: ROCHESTER, NY 14606
Phone: 845/473-1137
Website: www.iic.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler-2nd Shift
SMT operator with knowledge of IPC-610 & J-Std-001 quality standards. Operates through-hole or surface mount technology (SMT) automatic assembly equipment to produce high quality complex printed circuit board assemblies (experience with operating SMT My Data equipment desired). Responsible for set-up, operations and routine maintenance. Operator manual or semi-automatic equipment screen print solder paste. Operate adhesive dispensing equipment. Loads components supplied in tubes or reels onto feeders and loads feeders onto placement equipment. May hand place some SMT components. Place assembled printed circuit boards into solder reflow ovens. May use standard electronic hand tools (solder, flux and adhesive). Utilize drawings, visual aids and other instructions to identify defects.
Basic Qualifications
• Experienced with working in an Electro Static Discharge (ESD) environment
• One year experience working with Surface Mount Technology (SMT) material, specifically the soldering of SMT components or operating SMT My Data equipment
• Good written and oral communication skills
• Good computer skills with ability to work from electronic work instructions
• Demonstrated printed circuit knowledge and experience
o One year experience in IPC 610 soldering
o Experienced with working with hand tools
o Experienced working with a microscope
Job Location: Clearwater, F L
Rate: 20
Per Diem: Split
Duration: 12 mos
Start Date: ASAP
Input Date: 06/10/2025
Attention: Venkat Manta
Address: 687 LEE RD STE 350
City, State: ROCHESTER, NY 14606
Phone: 845/473-1137
Website: www.iic.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aviation Wire Harness Design - Mentor Graphics
Job responsibilities
Develops and maintains cable/wire harness detail and assembly designs. Analyzes results and performs design reviews. Develops and maintains electrical product detail, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry, antennas).Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Documents processes, specifications and procedures that support the design and manufacture of electrical commodities. Develops basic statements of work. Participates in technical review of supplier capabilities to facilitate source selection. Analyzes functional and physical input to assure development of complete integrated design. Works under general direction.
Minimum Requirements:
Candidates must meet the following requirements:
• Education: BSEE or equivalent technical degree with 3-5 years of relevant experience or MS with 2-4 years of relevant experience
• Proven experience with wire harnessing and design, including test
• Experience interpreting electrical schematics
• Experience with part selection and component trade studies
• Proficient with CAD modeling of harness assemblies
• Understands calibration techniques for electrical testing of equipment and cabling
• Proficient using EDA tools
• Experience with test planning and execution
• Experience with test procedure development and documentation
• Proficient using electrical test equipment including oscilloscopes, waveform generators, DMMs, and logic analyzers
• Strong analytical skills and ability to debug complex systems
• Process oriented and familiarity with problem tracking systems
• Ability to communicate effectively
• Ability to work independently and deliver on schedule commitments
• Candidates must be willing to work on-site at the Manassas, VA facility as needed
• Candidates must be U.S. Persons (U.S. Citizen or a Permanent Resident/Green Card Holder)
Candidates will have experience in some of the following areas:
• Aircraft avionics
• Experience with Mentor Graphics Capital tool
• Block diagramming with Microsoft Visio
• Experience supporting the manufacturing process from requirements through build and test
• Experience designing and/or testing analog power electronics, including 28VDC systems and 115VAC
• Familiarity with high voltage power systems for electric aircraft propulsion
• Experience with environmental qualification and stress testing of hardware
• Familiarity with high speed digital electronics, including serial data hardware interfaces
• IPC-620
• AS50881
• DO-160, DO-178 or DO-254
• ARP4761, ARP4754
• MIL-HDBK-516
• MIL-STD-810, MIL-STD-461, MIL-STD-704
TSC is an AA/EOE.
Rate: $50-57/hr
Per Diem: Yes
Overtime: No
Duration: 12-months+
Start Date: ASAP
Input Date: 06/10/2025
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionic Technician
Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, engineering drawings and written or verbal instructions. Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions.
Desired Skills
P-3,C-130, F-16 and C-5 aircraft installation experience to include wire harness installation and check out procedures.
- Ability to interpret installation drawings, install and route electrical cable assemblies, perform multiple termination processes and perform continuity checks in accordance with standard processes.
- Ability to read and interpret engineering drawings, technical manuals, understanding symbols, flags, and general notes.
- Ability to identify aircraft locations by station, butt-line, and waterline as shown or engineering documentation and technical orders.
Comments:
2nd Shift
Completion bonus is $1250 at 6 months and also at 1 year.
Job Location: Greenville, S C
Rate: 35
Per Diem: Split
Duration: 12 mos
Start Date: ASAP
Input Date: 06/10/2025
Attention: Venkat Manta
Address: 687 LEE RD STE 350
City, State: ROCHESTER, NY 14606
Phone: 845/473-1137
Website: www.iic.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics / Electrical Design and Analysis Engineer 4
Very exciting opportunity to work with one of the world's largest aerospace companies!
The contracts are regularly extended and direct opportunities are often available.
Description:
Avionics/Electrical Design/Wire Design Engineer
Oklahoma City AMM Avionics and Flight Deck Integration is seeking experienced Avionics/Flight Deck and Electrical Design & Integration engineers. The candidate will provide engineering integration and support technical design decisions for Military Aircraft, Military Derivative Aircraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, B-1B, B-2, B-52 and others) and diverse projects including development of aircraft design and verification strategy and architecture, breakdown of verification requirements, design including equipment placement, wiring pin-to-pin, wire diagrams, lab harness design, lab harness installation, equipment installation, rack design, troubleshooting, lab automation, simulation, and verification activities for aircraft development and modifications within our Portfolios.
Other job responsibilities may include
Works with customers to develop and document complex avionics, electronic and electrical system requirements and design for aircrafts.
Analyzes and translates requirements into system architecture, hardware and software designs and interface specifications.
Analyzes results and performs design reviews
Develops and maintains electrical product detail, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry, antennas)
Supporting programs with the overall integration, Tests and validates to ensure system designs meet operational and functional requirements.
Analyzes functional and physical input to assure development of complete integrated design
Monitors supplier performance to ensure system integration and compliance with requirements.
Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle.
Participates in technical review of supplier capabilities to facilitate source selection
Basic Qualifications (Required Skills and Experience)
Experience in wire design tools such as Mentor Capital, WIRS, CEEDS, and/or an equivalent avionics wire design system is highly desired.
Experience with requirements management software (e.g. DOORS) AND/OR Model Based Systems Engineering (MBSE) and Model Based Engineering through-out the development lifecycle.
Experience on aircraft or avionics development program(s) and in engineering labs is a plus.
Must possess good organizational, interpersonal, and problem solving skills.
Must have demonstrated a strong work ethic and sense of urgency for completing assigned work with a history of meeting commitments.
Ability to adjust priorities to multiple demands and unanticipated events.
Highly motivated and must work well in a team environment.
The ability to communicate effectively, both verbally and in writing.
Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, Master's degree with 7 or more years' experience or PhD degree with experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering. ABET in electrical engineering is the preferred, although not required, accreditation standard.
Oklahoma City AMM Avionics and Flight Deck Integration is seeking experienced Avionics/Flight Deck and Electrical Design & Integration engineers. The candidate will provide engineering integration and support technical design decisions for Military Aircraft, Military Derivative Aircraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, B-1B, B-2, B-52 and others) and diverse projects including development of aircraft design and verification strategy and architecture, breakdown of verification requirements, design including equipment placement, wiring pin-to-pin, wire diagrams, lab harness design, lab harness installation, equipment installation, rack design, troubleshooting, lab automation, simulation, and verification activities for aircraft development and modifications within our Portfolios.
Other job responsibilities may include
Works with customers to develop and document complex avionics, electronic and electrical system requirements and design for aircrafts.
Analyzes and translates requirements into system architecture, hardware and software designs and interface specifications.
Analyzes results and performs design reviews
Develops and maintains electrical product detail, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry, antennas)
Supporting programs with the overall integration, Tests and validates to ensure system designs meet operational and functional requirements.
Analyzes functional and physical input to assure development of complete integrated design
Monitors supplier performance to ensure system integration and compliance with requirements.
Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle.
Participates in technical review of supplier capabilities to facilitate source selection
Basic Qualifications (Required Skills and Experience)
Experience in wire design tools such as Mentor Capital, WIRS, CEEDS, and/or an equivalent avionics wire design system is highly desired.
Experience with requirements management software (e.g. DOORS) AND/OR Model Based Systems Engineering (MBSE) and Model Based Engineering through-out the development lifecycle.
Experience on aircraft or avionics development program(s) and in engineering labs is a plus.
Must possess good organizational, interpersonal, and problem solving skills.
Must have demonstrated a strong work ethic and sense of urgency for completing assigned work with a history of meeting commitments.
Ability to adjust priorities to multiple demands and unanticipated events.
Highly motivated and must work well in a team environment.
The ability to communicate effectively, both verbally and in writing.
Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, Master's degree with 7 or more years' experience or PhD degree with experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering. ABET in electrical engineering is the preferred, although not required, accreditation standard.
The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.
We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.
We have a national medical, dental and vision plan with United Healthcare and we also have a robust 401K offering. In some cases there is bonus potential, sick pay and holiday pay for those who qualify.
The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)
The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)
Job Location: Oklahoma City OK
Per Diem: --
Overtime: --
Start Date: 2022-01-11
Input Date: 06/10/2025
Attention: Kimra Stone
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Avionics Manufacturing Engineer
An MRB Avionics Engineer job is currently available at Belcan. This is contract opportunity with benefits in Tehachapi, CA. To be considered for this role, you will need a Bachelor's degree and at least 3 years of engineering experience or an equivalent degree and experience combination.
MRB Avionics Engineer job duties:
Requirements
* B.S. degree in Mechanical, Aerospace, or similar engineering discipline is required
* At least 5 years of relevant industry experience
* Understanding of MRB requirements & procedures
* Provide avionics production support and drawing redlines
* Engineer to provide support to technicians on harness assembly, harness installation, and harness terminations on-ship. Provide guidance and redlines if required.
* Experience with wire harness design and install drawings is a plus.
* Experience with flight test instrumentation (strain gauges specifically) is a plus.
* Knowledge of air vehicle systems, systems integration, engineering design, the drawing release process, and subsystems/component qualification
* Working knowledge and experience integrating various mechanical systems into a composite aircraft.
* Review and provide final engineering technical disposition of non-conformance notifications
* Participate in product Corrective Action Board (CAR) reviews
* Willingness to support weekend shift operations
Responsibilities
* Inspect avionics production work such as wire harness assembly and instrumentation
* Performs other duties as assigned
* May require 2nd, 3rd, or 4th shift work
Job Location: Lexington, KY
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 06/10/2025
Attention: TimRipperger
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Systems Engineers (REMOTE) - 40 openings!
Title
Systems Engineer 3, 4 & 5
Skill
Avionics Systems Design & Analysis
Worksite:
Everett, WA & REMOTE
It’s preferred that they are local to get access to the lab from time to time but will hire remotely for qualified candidates as they have a need to hire 40 engineers in a short-time frame!
Duration (Mths)
12 months +
Pay:
Systems Engineer 3 - $45 to $60/HR based on experience
Systems Engineer 4 - $50 to $65/HR based on experience
Systems Engineer 5 - $60 to $75/HR based on experience
Clearance Required?
No
Job Description
Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects.
Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications.
Leads testing and validation work on complex system designs to assure that operational and functional requirements are met.
Works with other to develop program test strategies.
Manages performance of critical suppliers to ensure system integration and compliance with requirements.
Conducts program independent reviews and reports results to program leadership.
Provides critical support of fielded hardware and software over the entire product lifecycle.
Leads research into technology advances for potential application to company business needs.
Makes recommendations for technology investments.
Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.
What are the Top 3-5 Technical/Software Skills needed to perform this role/job?
Avionics/Electronics Systems Experience, all-star would have LRU experience
Requirements Development Experience
Analog/Digital Signal Proc, Circuit Design, EMI/EMC, etc..
Design / Produce Process
Analytical Skills (Technical)
|
|
Job Location: REMOTE, WA
Rate: $50 to $75/HR
Per Diem: Yes
Overtime: Possible
Duration: 12+ months
Start Date: ASAP
Input Date: 06/10/2025
Attention: Brad McInnis
Address: 20 ASHBURTON PL
City, State: BOSTON, MA 02108
Website: www.bhsg.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics and Electrical Systems Installation Engineer
Minimum Requirements
Experience with avionics and electrical system design to the requirements of CFR 14 Part 25 is desired.
• Minimum 5 years of CATIA mechanical design experience for component and assembly design and drafting is required. Experience with CATIA V6 is preferred.
• Strong computer, written and verbal communication skills required.
• Time management skills are required to work multiple concurrent projects of various size and scope.
• Experience with Microsoft Office Word, Excel, PowerPoint are required, Visio experience is desired.
• Design knowledge of electrical bonding criteria, thermal cooling requirements for electronic equipment, EMI shielding, and High Intensity Radiated Fields (HIRF) / Indirect Effects of Lightning (IEL) installation criteria is considered a plus
Bachelor of Science in Mechanical Engineering, or Mechanical Engineering Technology from an ABET accredited institution is required.
Description/Comment:
The Avionics and Electrical Systems Installations engineer ensures that the installation of all avionics and electrical equipment on the aircraft meet environmental, functional, weight, cost, and structural requirements to support the highest standard of safety and customer reliability expectations.
========
If qualified, email a WORD version copy of your resume along with your hourly PAY RATE and then
call Peggy at 774-210-4108 Referrals appreciated!!
Job Location: KS & GA
Rate: 70/per hour
Per Diem: Possible
Overtime: Possible
Duration: 6-12+ months
Start Date: 2-3 weeks
Input Date: 06/10/2025
Attention: Peggy Sr. Recruiter
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Programmer
A CNC Programmer job in Los Alamitos, CA is currently available through Belcan. In this role, you will be responsible for the managing, programming and maintenance of computer numeric controlled (CNC) equipment for prototype (first run) and production of composite parts within the facility. To be considered for this role, you will have a High School Diploma, or equivalent, plus 5-7 years of relevant experience.
CNC Programmer Job duties:
* Review electronic or written blueprints or specifications for a job
* Review and obtain proper tooling
* Program extremely close tolerance parts
* CNC program in Mastercam (2020) 3, 4, and 5 axis geometry, proving out programs prior to machining, machining of parts and tools through CNC machining on 3-axis vertical mills, Large Capacity 5-axis CNC Router, 2 axis lathe and manual machining
* Work with operators, program managers, engineers to determine project scope, schedule and important job details
* Determine methods, tooling, feeds, speeds and all other necessary requirements necessary for manufacturing of parts
* Machine composite materials including carbon, fiberglass, honeycomb, and others
* Direct or train other employees in machine setup, running, maintenance and cleaning
* On occasion, you may be asked to work irregular hours to accommodate manufacturing schedules
* Keep program managers informed of operations, problems, and opportunities as they arise
* Maintain appropriate records and documentation
Qualifications:
* Prior experience with MasterCAM programming
* Programming 3, 4 and 5 axis Mill & 2 axis Turn equipment
* Must have strong GD&T knowledge to interpret engineering drawings from sketches, determine cutting or grinding tools to be used, method of holding, and machine speeds and feeds
* Varied CNC operating experience desirable
* Must have worked in CNC programming demonstrating a high degree of proficiency
* Experience machining a variety of materials.
* Solid understanding of manufacturing processes for layup, trim, and assembly of composite hardware
* Previous experience working in a fast-paced production environment with high quality requirements; example military, aerospace or medical equipment highly preferred
* Ability to read and interpret company documents, such as safety rules, operating/manufacturing instructions, policies and procedures
* Ability to read/interpret engineering drawings and specifications
* Able to perform basic mathematics (addition, subtraction, multiplication, division)
* Ability to identify composite damages
If you are interested in this CNC Programmer position in Los Alamitos, CA please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.
Job Location: Los Alamitos, CA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 06/10/2025
Attention: ScottWatkins
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Cable Assembler
Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on cabinet assemblies which includes installing cables, subassemblies and circuit card assemblies. Ability to work from diagrams and drawings, make initial layouts, and use hand and/or power tools. May conduct quality inspections on processing line in accordance with quality specifications. May disassemble, modify, rework, reassemble, and test production or prototype assemblies and subassemblies according to specifications. Expected to read and comprehend assembly parts lists, assembly drawings and any related reference documentation. Builds in accordance with IPC-620 quality standards. Troubleshooting of process parameters to improve yield.
• One-year experience in IPC-620
• Must have good manual dexterity
• Strong mechanical build experience accurately interpreting written work instruction, drawings, sketches, and wiring diagrams.
• Experienced with working in an Electrostatic Discharge (ESD) environment
• Experienced with working with hand tools used in the assembly of cables and cabinet assemblies
• Experienced with working with hand tools
• Knowledge of cable termination including familiarity with crimping specifications and use of both automated and hand crimping tools
• Good written and oral communication skills
• Good computer skills with ability to work from electronic work instructions
• Use of manual and automatic wire strippers
Will not get max pay rate without extensive, stable experience.
Degree not required.
Supervisor is looking for candidates who are mechanically inclined
Supervisor would like candidates with fiber experience
Job Location: Clearwater, F L
Rate: 20
Per Diem: Split
Duration: 12 mos
Start Date: ASAP
Input Date: 06/10/2025
Attention: Venkat Manta
Address: 687 LEE RD STE 350
City, State: ROCHESTER, NY 14606
Phone: 845/473-1137
Website: www.iic.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Certification Engineer
The position will be responsible for showing compliance to FAA regulations by following Certification Organization Designation Authorization (ODA) Procedures, FAA Order 8100.15 and FAA Order 8110.4 to prepare data packages for aftermarket Supplemental Type Certificates (STC’s). This position exercises independent judgment with regard to the resolution of problems and interaction with internal and external departments, outside vendors, subcontractors and consultants, ODA Unit Members (UM’s) and customers.
PRIMARY RESPONSIBILITIES INCLUDE:
• Understand, plan and execute certification activities in accordance with Engineering policies, procedures, work instructions, customer specific requirements and FAA guidance.
• Interfaces and communicates with Program Management, Engineering, ODA administrator, UM’s and ODA Staff, all branches of the FAA, and customers as necessary. Provides certification guidance and or interface to and or their subsidiaries when necessary.
• Manage the STC project by providing work estimates, tracking progress according to schedule, coordinating with the Program Manager and Project UM’s, and supporting technical discussions with customers.
• Ensures successful completion of the assigned project phase within the budgeted time and cost constraints.
• Develop, edit and contribute to reports supporting certification activities such as FAA Project Specific Certification Plans (PSCP), Conformity Inspection Plans (CIP), Project Notification Letters (PNL), Requests for Conformity (RFC), Type Inspection Authorizations (TIA), Compliance Reports, etc.
• Coordinates with Engineering and/or UMs for the preparation of all substantiating documents required to show compliance with appropriate 14 CFR Parts per project Compliance Checklist, including but not limited to structural compliance documents, electrical substantiation, electrical load analysis, test plans, test reports, Instructions for Continued Airworthiness (ICA), etc.
• Review substantiating documents such as test plans, reports, analyses, drawings, etc., to ensure they agree with requirements outlined in the PSCP.
• Responsible for tracking, evaluating and incorporating incoming comments from the FAA and UMs.
• Responsible for populating and maintaining certification status and comments to the project Rolling Action Item List (RAIL) specific to each project.
• Responsible to obtain FAA approvals (8100-9, 8110-3) from Certification ODA UMs for compliance documents and ensure all 14 CFR Regulations are 100% accurately indicated, and 100% in agreement with the associated Compliance Checklist and the document being approved.
• Responsible for final file cleanup (both paper and electronic copy) of all certification and technical data before each project is closed and submitted to the ODA.
• Oversees preparation of, and audits the certification project close-out packages, prior to submittal to the ODA administrator.
• Coordinates with foreign certification agencies regarding validation efforts on FAA issued STCs.
• Performs maintenance and updates of electronic project files.
• Provide certification support and expertise to Business Development activities as required; including certification guidance and input for development of Statement of Work and Bid Packages.
• Will be involved in continuous improvement efforts and development of ways to become more efficient while maintaining high standards and meeting FAA/ODA requirements.
• Other duties as assigned.
job descriptions are meant as summarizations only. They do not necessarily reflect all duties and responsibilities of a position.
ESSENTIAL FUNCTIONS:
• Minimum physical requirements to perform all duties and responsibilities, as defined by management
• A wide and comprehensive acquaintance with, and understanding of, both general and specific aspects of the job and their practical application to complex problems and situations ordinarily encountered
• Ability to perform with minimal supervision. Work may be performed without established procedures
Note. Ability to obtain/maintain a security clearance may be required
EDUCATION/EXPERIENCE REQUIRED:
Job Title Typical Experience
Certification Engineer I 0 - 2+ Years
Certification Engineer II 3+ Years
Senior Certification Engineer I 6+ Years
Senior Certification Engineer II 8+ Years
• BS/BA in engineering discipline or equivalent experience
• A solid understanding of 14 CFR, Parts 21, 23, 25, experience with Parts 27 and 29 a plus
• 6+ years of experience in FAA aircraft certification activities
• Strong knowledge and understanding of the FAA certification process
• Experience with STC certification development in a repair station, MRO or another ODA
• Technical writing experience required
• Effective interpersonal skills within an engineering environment influencing the success of a program
• Must have excellent written and oral communication skills and the ability to motivate others
• Must be able to think quickly and make sound decisions in regards to aircraft issues
• Must be a self-starter, solution focused, with a positive attitude
• Familiar with commercial technical publications, requirements, and processes
• Familiar with computer-aided design and drafting packages
• Proficiency in intranet/internet environment and Windows operating systems is required
• Proficient with MS Office and MS Project or related project tracking system
The Structures Company LLC is an AA/EOE
Job Location: Wichita, KS
Rate: $60/Hr.
Per Diem: Yes
Overtime: No
Duration: 6 months to 1 Year
Start Date: ASAP
Input Date: 06/10/2025
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Circuit Design Engineer (Chandler, AZ) 2861-1, 4016-1
Circuit Design Engineer (Chandler, AZ) 2861-1, 4016-1
12 month contract
Pay rate: $55-60/hr W2
Analog / Mixed-signal Circuit Design Engineer
Electrical engineer to design board level electronic circuits and equipment for aerospace avionics.
Requirements:
-BSEE and 5 years, or MSEE and 3 years of mixed signal circuit design experience.
-Proficiency with simulation, Pspice and Cadence Schematic Capture.
-Proficiency in hardware troubleshooting / software debugging.
-Physical testing experience including proficiency with lab measurement equipment (oscilloscope, logic analyzer, etc).
-Ability to clearly communicate complex technical concepts verbally and in written form.
Position includes generation of design documents, specifications, user's manuals, test plans, analyses, etc.
Job Location: Chandler, AZ
Rate: 60
Per Diem: Yes
Overtime: yes
Duration: 12 months
Start Date: ASAP
Input Date: 06/10/2025
Attention: Angelia
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Conformity Management Engineering Lead
General Summary:
Interact with Engineering Leads and DERs to understand the criteria for determining the need for FAA conformity inspection
Interact with other parts of the organization to ensure that the data in company systems reflect the engineering definition and is sufficient to successufully plan conformity plannning.
Provide accurate and concise reports that reflect current status and trends.
Recommend actions to correct possible deviations and / or concerning trends
Work with its own team and IS to create a database to collect, reconcile and correct discrepant data in company systems.
Duties and Responsibilities:
Coordinate the work and support the team that will:
Reconcile what is planned to be conformed to data in company system
Entry of “Required Conformity” in Company electronic form
Create objects in Teamcenter to hold information related to items requiring FAA conformity that do not exist in Teamcenter
Support the creation of RFCs in Teamcenter
Reconcile / ensure existence of QRs for released drawings requiring conformity
Create and keep updated a “database” to hold or connect the following information
Enter SCM information in the RFC
Track the completion of RFC in Teamcenter
Enter RFC information in NACIP
Reconcile RFC needs with what SAP QNs that track it have
Create associated reports
Communicate status to management and other departments
Follow up on DERs answers to Discrepancies
Qualifications
Education, Work Experience, Certificationa and/or Licensure
BS in Data Management / Business Administration / Engineering
Mininum of 5 years working with FAA related processes of conformity inspection
Excellent data analysis and communication skills
Minimum of 5 years as advanced user of Product Life-Cycle management products, preferably Teamcenter.
Proficient user of Microsoft Office tools, especially Excel
Knowledge, Skills, and Abilities:
Ability to adapt to and work effectively within a dynamic environment
Ability to look beyond the obvious to identify solutions. Understands requirements; able to logically handle daily operational situations;
Ability to present effectively to diverse and demanding audiences.
Personality requirements
Persistent
Excellent negotiation skills
Reliable
Self motivated
Pro-active
Focused
Works well in teams and minimum supervision
Flexible
Goal and detail oriented
The Structures Company LLC is an AA/EOE
Job Location: Greensboro, NC
Rate: $55-$65/Hr. **DOE**
Per Diem: Yes
Overtime: Possible
Duration: Long Term Contract
Start Date: ASAP
Input Date: 06/10/2025
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer 4
Very exciting opportunity to work with one of the world's largest aerospace companies!
The contracts are regularly extended and direct opportunities are often available.
Description:
Leads work with customers to develop and document complex electronic and electrical system requirements. Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications. Leads work to test and validate to ensure system designs meet operational and functional requirements. Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches technology advances for potential application to company business needs. Makes recommendations for technology investments.
What are the Top 3-5 Technical/Software Skills needed to perform this role/job?
Analog/Digital Signal Proc
Analytical Skills (Technical)
Circuit Design
Design / Produce Process
EMI/EMC
Analog/Digital Signal Proc
Analytical Skills (Technical)
Circuit Design
Design / Produce Process
EMI/EMC
Combination of remote/onsite. Needs to be local but can work from home a few days a week
OT is possible
6 months duration with possibility for extension
OT is possible
6 months duration with possibility for extension
The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.
We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.
We have a national medical, dental and vision plan with United Healthcare and we also have a robust 401K offering. In some cases there is bonus potential, sick pay and holiday pay for those who qualify.
The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)
The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)
Job Location: Everett WA
Per Diem: --
Overtime: --
Start Date: 2022-03-08
Input Date: 06/10/2025
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EE Technical Designer 3 - Mechanical/Electronic/Electrical Design
Description
Develops, maintains and releases electrical/mechanical drawings, systems designs or engineering documentation and data by applying company, industry and governmental standards. Using design tools prepares documentation and incorporates design changes. Creates, develops and maintains systems designs by preparing design layouts, modifying existing designs and assisting in identifying design discrepancies. Supports engineering system design and functionality validation activities. Develops and maintains product installation designs and part designs ranging from simple to moderately complex. Coordinates activities and products with internal partners and external suppliers. Works under general direction.
2-3 years of experience in electrical or mechanical engineering
Assembly experience preferred
Experience with supplier relations
Bachelor’s degree preferred, but not required
6 months with the possibility for extension or to become permanent employee. Candidate will need to be local or willing to relocate as this is an on-site role.
Job Location: Berkeley, MO
Rate: DOE
Per Diem: Yes
Overtime: Yes
Duration: 6-12 months+
Start Date: ASAP
Input Date: 06/10/2025
Attention: Garrett Smart
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design & Analysis Engineer
MUST BE US PERSONS - REMOTE WORK IS AN OPTION
DESIRED EXPERIENCE:
• VHDL,
• Xilinx FPGA’s
• System Verilog
• UVM
• FPGA On Target Testing (OTT)
• DO-254
• MIL-STD-882E
• MIL-HDBK-516C
• Bachelor’s Degree with 5+ years of experience
INTERVIEW PROCESS:
The manager is looking to schedule interviews as soon as possible. These will be phone interviews with the Chief Firmware Engineer and the Engineer Manager where they will primarily discuss the candidates experience with VHDL, developing DO-254 processes and experience with On Target Testing.
JOB DESCRIPTION
Leads analysis of customer and system requirements and development of architectural approaches and detailed specifications for various electronic products. Leads development of high-level and detailed designs consistent with requirements and specifications. Leads reviews of testing and analysis activity to assure compliance to requirements. Identifies, tracks and statuses technical performance measures to measure progress and ensure compliance with requirements. Leads activities in support of Supplier Management with make/buy recommendations and other technical services. Coordinates engineering support throughout the lifecycle of the product. Plans research projects to develop concepts for future product designs to meet projected requirements. Works under minimal direction.
Leads activities to develop, document and maintain complex architectures, requirements, algorithms, interfaces and designs for Xilinx FPGA based firmware systems. Leads development of code and integration of complex firmware components into a fully functional system. Develops firmware verification plans, test procedures and test environments, executing the test procedures and documenting test results to ensure firmware system requirements are met. Provides technical leadership for firmware projects. Leads development, selection, tailoring and deployment of processes, tools and metrics. Leads firmware research and development projects. Serves as a subject matter expert for firmware domains, system-specific issues, processes and regulations. Tracks and evaluates firmware team performance to ensure product and process conformance to project plans and industry standards. Trains and mentors others. Works under consultative direction.
This will be a 12 month assignment on a team of 30 where they will be developing requirements, code, and test procedures for safety critical avionics. This opening is open to virtual candidates, as the person selected for this role will not be required to sit on-site.
TSC LLC is an AA/EOE
Rate: $60-73/hr
Per Diem: Possible
Overtime: Possible
Duration: 12 Months+
Start Date: ASAP
Input Date: 06/10/2025
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design and Analysis Engineer 3
Analyzes customer and system requirements to develop basic architectural approaches and detailed specifications for various electronic products. Develops high-level and detailed designs consistent with requirements and specifications. Validates designs through various methods of review, testing and analysis. Identifies, tracks and statuses technical performance measures to measure progress and ensure compliance with requirements. Supports Supplier Management with make/buy recommendations and other technical services of limited scope. Provides engineering support throughout the lifecycle of the product. Investigates emerging technologies to develop concepts for future product designs to meet projected requirements. Works under general direction.
Job responsibilities (from SJC skill level description):
Analyzes customer and system requirements to develop basic architectural approaches and detailed specifications for various electronic products. Develops high-level and detailed designs consistent with requirements and specifications. Validates designs through various methods of review, testing and analysis. Identifies, tracks and statuses technical performance measures to measure progress and ensure compliance with requirements. Supports Supplier Management with make/buy recommendations and other technical services of limited scope. Provides engineering support throughout the lifecycle of the product. Investigates emerging technologies to develop concepts for future product designs to meet projected requirements. Works under general direction.
Minimum Requirements:
Candidates must meet the following requirements:
BSEE or equivalent technical degree with 3-5 years of relevant experience or MS with 2-4 years of relevant experience
Ability to translate requirements to design
Experience with high level architectural design and component selection
Proven experience performing an electronic detailed design, including schematic capture
Proficient using EDA tools
Experience with test planning and execution
Experience with test procedure development and documentation
Proficient using electrical test equipment including oscilloscopes, waveform generators, DMMs, and logic analyzers
Strong analytical skills and ability to debug complex systems
Process oriented and familiarity with problem tracking systems
Ability to communicate effectively
Ability to work independently and deliver on schedule commitments
Candidates must be willing to work on-site at the Manassas, VA facility as needed
Candidates must be U.S. Persons (U.S. Citizen or a Permanent Resident/Green Card Holder)
Desired Requirements:
Candidates will perform all work on-site at the Manassas, VA facility
Candidates will have experience in some of the following areas:
Aircraft avionics
Experience with Mentor Graphics Capital tool
Block diagramming with Microsoft Visio
Experience supporting the manufacturing process from requirements through build and test
Experience designing and/or testing analog power electronics, including 28VDC systems and 115VAC
Familiarity with high voltage power systems for electric aircraft propulsion
Experience with environmental qualification and stress testing of hardware
Familiarity with high speed digital electronics, including serial data hardware interfaces
DO-160, DO-178 or DO-254
ARP4761, ARP4754
MIL-HDBK-516
MIL-STD-810, MIL-STD-461, MIL-STD-704
The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)
Job Location: Manassas VA
Per Diem: --
Overtime: --
Start Date: 2022-01-13
Input Date: 06/10/2025
Attention: JR Gonsalves
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer
An Electrical Engineer job in Salem, VA is currently available at Belcan. To be considered for this role, you must have a Bachelor's degree in Electrical Engineering and 2-10 years of experience with design and development tools. In this role you will be part of a team developing electric power generation and control platforms used for solar, batter storage, wind, and other applications.
Essential Responsibilities
Electrical Engineer Job Duties:
· Develop hardware design documentation for embedded control systems.
· Design electrical schematics and print circuit boards for electric power systems.
· Develop FPGA-based solutions for communications and other I/O.
· Provide technical support to resolve field issues
· Own and maintain electronic platforms across throughout the product life cycle.
· Use the latest emerging technologies and tools to solve complex engineering problems, working alongside product domain experts and technical professionals
Job Qualifications:
· Strong demonstrated aptitude for electrical design.
· Digital and analog circuit design expertise
· FPGA development experience
· Familiarity with Cadence tool chain
· Familiarity Altera and/or Xilinx toolchains
· Co-op or internship experience with design and development tools.
· Electrical Engineering Degree or Computer Engineering Degree
· Legal authorization to work in the U.S. is required/U.S. Citizen only
Preferred Skills:
FPGA coding, Spice, Printed Circuit Board design, interest or experience in electric power industry
Job Location: Salem, VA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 06/10/2025
Attention: VarunSingh
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer III
An Electrical Engineer III job in Louisville, CO is currently available through Belcan. In this role, you will be responsible for planning and execution of activities, development of test documentation (test plans, procedures, scripts and reports etc.), supporting test reviews, executing various test activities, supporting anomaly resolution, test data analysis and generation of test reports in conjunction with the other groups in order to verify the Electrical System and its interfaces with other systems. To be considered for this role, you will have a Bachelor of Science Degree in Electrical Engineering or other related discipline and a minimum of 6 or more years of relevant experience.
Electrical Engineer III Job duties:
* Electrical Power System hardware/software test experience.
* Knowledgeable in the use of various electronic systems analysis and test equipment. Experience with testing, verification and validation.
* Able to correctly read and understand electronic drawings/schematics and other technical engineering or documentation (e.g. Specs, ICDs, Users Guides etc.).
* Ability to decompose large complicated problems into manageable pieces, understand problems from different points of view, and explain issues/solutions to other engineers and management.
* The candidate must be comfortable interacting with and coordinating with subject matter experts whose depth of knowledge may exceed their own while still providing a perspective that comes with breadth of knowledge.
Qualifications:
* Experience with data acquisition, sensors and recording systems.
* Experience with modeling electronic circuit (Spice).
* Experience composing and analyzing Electrical Load Analysis (ELA), circuit modeling, simulation, and analysis.
* Background in the Aerospace and Defense Industry. Experience working with NASA; human spaceflight program experience is a bonus.
If you are interested in this Electrical Engineer III position in Louisville, CO please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.
Job Location: Louisville, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 06/10/2025
Attention: FrancisOsolnick
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer III
We are currently seeking exceptional candidates who wish to be a part of the commercial space revolution. The position we are seeking is for an Electrical Engineer III.
Our fun, fast-paced and collaborative team designs, builds, and flies a state of the art Cargo System, an ambitious flagship program to create our Nation's only commercially reusable space plane. With your help, we will conduct many safe and successful missions over the next decade to deliver critical cargo to and from the International Space Station. These flights for NASA will enable us to build an unprecedented commercial space transportation network, which provides affordable, cutting-edge orbital capability and return to Earth services onto runways around the globe. The future of space transportation is now.
The Electrical Engineer III will be responsible for planning and execution of activities, development of test documentation (test plans, procedures, scripts and reports etc.), supporting test reviews, executing various test activities, supporting anomaly resolution, test data analysis and generation of test reports in conjunction with the other AS&C groups in order to successfully verify the Electrical System and its interfaces with other systems.
Must-haves:
*Bachelor's of Science degree in Electrical Engineering or other related discipline and typically 6 or more years of relevant experience
*Electrical Power System hardware/software test experience
*Excellent communication skills required
*Excellent written skills required
*Excellent attention to detail
*Knowledgeable in the use of various electronic systems analysis and test equipment. Experience with testing, verification and validation
*Able to correctly read and understand electronic drawings/schematics and other technical engineering or documentation (e.g. Specs, ICDs, Users Guides etc.)
*Ability to decompose large complicated problems into manageable pieces, understand problems from different points of view, and explain issues/solutions to other engineers and management
*The candidate must be comfortable interacting with and coordinating with subject matter experts whose depth of knowledge may exceed their own while still providing a perspective that comes with breadth of knowledge
Preferred:
*Experience with data acquisition, sensors and recording systems
*Experience working with integrated product teams
*Experience with modeling electronic circuit (Spice)
*Experience with requirements management and verification
*Experience working with DOORS or other verification tool
*Background in the Aerospace and Defense Industry.
*Experience working with NASA; human spaceflight program experience is a bonus
*Exposure to simulations through functional and logical models and system analysis
*Experience composing and analyzing Electrical Load Analysis (ELA), circuit modeling, simulation, and analysis
*Knowledge of industry-standard electrical design principles, to include, but not limited to model-based definition, electrical component selection, manufacturing, and production processes
*Experience in digital or analog circuit design and schematic capture
*Ability to work in a highly collaborative, fast paced environment with emphasizes in rapid prototyping and fielding of capabilities
*Ability to rapidly work with minimal supervision on projects involving both small and large engineering teams
IMPORTANT NOTICE:
To conform to U.S. Government international trade regulations, applicant must be a U.S. Citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State or U.S. Department of Commerce.
Rate: $49/HR-$53/HR
Per Diem: Possible
Overtime: Possible
Duration: Long Term Contract
Start Date: ASAP
Input Date: 06/10/2025
Attention: Corey Halliday
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer III (Contract)
Are you ready to unleash your technical creativity? Dream, Innovate, Inspire and Empower the next generation to transform humanity through technology and imagination!
- Electrical engineers research, design, develop, test, certify, deploy and improve cutting edge products and services. These cover a very wide range from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. You'll conceptualize and design new products and processes throughout the product lifecycle from analog and digital electronic circuit card assemblies to fully integrated systems.
Must-haves:
Bachelor's of Science degree in Electrical Engineering or other related discipline and typically 10 or more years of relevant experience
Demonstrated knowledge of engineering principles and practices
Experience with Computer Aided Engineering tools
Progressive experience working in multi-disciplinary design and development teams
Ability to create wiring diagrams and Harness drawings using Capital Logic / Harness XC
Preferred:
Exposure to simulations through functional and logical models and system analysis
Background in the Aerospace and Defense Industry
Experience composing and analyzing Electrical Load Analysis (ELA), circuit modeling, simulation, and analysis
Familiarity with design requirements related to High Intensity Radiated Field (HIRF) and Indirect Effects of Lightning (IEL)
Knowledge of industry-standard electrical design principles, to include, but not limited to model-based definition, electrical component selection, manufacturing, and production processes
Familiar with Electro Magnetic Effects (EME) to include, Electro Magnetic Compatibility (EMC) and Electro Magnetic Interference (EMI)
Experience in digital or analog circuit design and schematic capture
Understanding of the printed circuit board layout process and tools
IMPORTANT NOTICE:
To conform to U.S. Government international trade regulations, applicant must be a U.S. Citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State or U.S. Department of Commerce.
The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)
Job Location: Louisville CO
Per Diem: --
Overtime: --
Start Date: 2022-02-23
Input Date: 06/10/2025
Attention: Corey Halliday
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer III (Contract)
Are you ready to unleash your technical creativity? Dream, Innovate, Inspire and Empower the next generation to transform humanity through technology and imagination!
- Electrical engineers research, design, develop, test, certify, deploy and improve cutting edge products and services. These cover a very wide range from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. You'll conceptualize and design new products and processes throughout the product lifecycle from analog and digital electronic circuit card assemblies to fully integrated systems.
Must-haves:
Bachelor's of Science degree in Electrical Engineering or other related discipline and typically 10 or more years of relevant experience
Demonstrated knowledge of engineering principles and practices
Experience with Computer Aided Engineering tools
Progressive experience working in multi-disciplinary design and development teams
Ability to create wiring diagrams and Harness drawings using Capital Logic / Harness XC
Preferred:
Exposure to simulations through functional and logical models and system analysis
Background in the Aerospace and Defense Industry
Experience composing and analyzing Electrical Load Analysis (ELA), circuit modeling, simulation, and analysis
Familiarity with design requirements related to High Intensity Radiated Field (HIRF) and Indirect Effects of Lightning (IEL)
Knowledge of industry-standard electrical design principles, to include, but not limited to model-based definition, electrical component selection, manufacturing, and production processes
Familiar with Electro Magnetic Effects (EME) to include, Electro Magnetic Compatibility (EMC) and Electro Magnetic Interference (EMI)
Experience in digital or analog circuit design and schematic capture
Understanding of the printed circuit board layout process and tools
IMPORTANT NOTICE:
To conform to U.S. Government international trade regulations, applicant must be a U.S. Citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State or U.S. Department of Commerce.
The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)
Job Location: Louisville CO
Per Diem: --
Overtime: --
Start Date: 2022-05-16
Input Date: 06/10/2025
Attention: Corey Halliday
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Design Engineer
JOB DESCRIPTION
Leads work with customers to develop and document complex electronic and electrical system requirements. Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications. Leads work to test and validate to ensure system designs meet operational and functional requirements. Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product life cycle. Researches technology advances for potential application to company business needs. Makes recommendations for technology investments.
Job Location: El Segundo, CA
Rate: $71/hourly
Per Diem: Split
Overtime: Possible
Duration: 6 mos
Start Date: Now
Input Date: 06/10/2025
Attention: Jorge Garcia
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Technician
This position is located in Schimatari, Greece. Individual will perform a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, engineering drawings and written or verbal instructions. Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions.
All Candidates must be fully Vaccinated to be submitted.
Comments:
All Candidates must be fully Vaccinated to be submitted.
Exact benefits package will be released to individual upon offer to hire
Desired (not required): training documentation to show FOD/tool control, HAZMAT, non-powered AGE support equipment…this will help speed up the specific training required once on site
If no training records, specific training will be provided once arrive in Greece prior to work start due to local policies.
Complete Bonus: Package dependent and will annotated w/ benefits package
1. Electrical 6+ Years
2. Blueprint Reading 6+ Years
Job Location: Greece
Rate: 32.64
Per Diem: 'YES'
Overtime: 'Yes'
Duration: 6 mos
Start Date: Jan 3rd
Input Date: 06/10/2025
Attention: Venkat Manta
Address: 687 LEE RD STE 350
City, State: ROCHESTER, NY 14606
Phone: 845/473-1137
Website: www.iic.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical/Mechanical Assembly Specialist
Job Description:
Performs complex production assembly operations and inspections on electronic/electrical and mechanical assemblies and subassemblies. Performs rework, repair and modification to parts and assemblies. Presents statistical data to team for analysis and problem resolution. Provides complex periodic maintenance on machines and tooling and complex machine set up tasks following machine inspection checklists. Coordinates with manager and other departments to coordinate work flow and resolve issues. Performs complex rework, repair and modification to parts and assemblies. Assembles and delivers kits. Performs simple receiving and inspections procedures on incoming materials. Documents inspection results in accordance with applicable procedures. Coordinates with management or other departments to establish work priorities. Updates work status documentation. Works under minimal supervision.
---------------------------
Position Responsibilities:
%u2022 Performs complex rework, repair and modification to parts and assemblies (e.g. soldering on electronic assemblies 90% of the time and mechanical assemblies 10% of the time).
%u2022 Performs complex production assembly operations on electronic/electrical and mechanical assemblies and subassemblies.
%u2022 Coordinates with supervisor and other departments to coordinate work flow and resolve issues.
%u2022 Coordinates with supervisor to establish work priorities.
%u2022 Works under minimal supervision.
Required:
%u2022 Must have 5+ yrs experience soldering components on PC board assemblies
Basic Qualifications (Required Skills/Experience):
%u2022 Minimum of High School Diploma or GED.
%u2022 More than 5 years of experience in electronics and electro-mechanical assemblies.
%u2022 More than 5 years of experience in a manufacturing or assembly environment.
%u2022 More than 5 years of experience performing soldering and electronics repair to the component level.
%u2022 More than 5 years of experience utilizing and following detailed work instructions, reading and interpreting blueprints, drawings, or specifications.
Preferred Qualifications (Desired Skills/Experience):
%u2022 Current IPC-7711/IPC-7721 certification for Rework and Repair of Electronic Assemblies.
Typical Education/Experience:
%u2022 Education/experience typically acquired through basic education (e.g. High School diploma/GED) and typically 7 or more years' related work experience or an equivalent combination of education and experience (e.g. vocational school/Associate+5 years' related work, Bachelor+2 years' related work, etc.)
Relocation:
%u2022 Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace: our client is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
--------------------------
Competencies: Information Technology Fluency, General Shop Processes, Engineering Drawings & Specs, Assembly Tools, Assembly Process, Teamwork, Continuous Learning, Accountability and Responsibility, Continuous Improvement, Adaptability, Change Management, Certification & Qualification.
Job Location: Germantown, MD
Rate: $34.00/hr
Per Diem: Split
Overtime: Yes
Duration: 6 months
Start Date: ASAP
Input Date: 06/10/2025
Attention: Jorge Garcia
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electro-Mechanical Technician
Introduction
Visium Resources has been asked to identify qualified candidates for this Electro-Mechanical Technician position. This position is a contract-to-hire opportunity which is expected to be on-site in the Atlanta, GA area .
Summary
The Electro-Mechanical Technician will be responsible for Assembly, disassembly, quality testing, troubleshooting, and repair of electronic - mechanical equipment in a customer service based environment. Company is searching for an eager hands-on candidate, ideally with both electronic and mechanical troubleshooting and repair capabilities. This position will have occasional interface with clients related to repairs and will also perform some documentation within computer system.
A primary attraction / primary skills / important qualifications of Electro-Mechanical Technician is that this position is a contract-to-hire opportunity, offering an excellent career position to grow with a national corporation, which is very well-established, well-respected and continually growing. When direct, the position offers full benefits. Position is scheduled to transition to direct within 4 months.
Essential Job Functions and Duties
Ability to read, write and speak fluent English.
Proficiency in DC-AC, solid state theory, audio signals, video signals, and applications.
Possess the ability to solder to the component level.
Ability to read and operate various measuring equipment related to electronics (Oscilloscope, digital multi-meters, signal analyzers, multi-meters, mega ohm meter etc.)
Ability to accurately annotate and maintain repair documentation.
Possess good attendance and work ethic. Be punctual and have a good attendance record.
Perform assigned tasks in a safe, effective, and efficient manner.
Have the flexibility to work overtime when required.
Ability to work independently or as a member of a team.
Have excellent problem solving and decision making skills.
Possess basic computer skills.
Read and understand complex assembly drawings, schematics, and test procedures.
Test, troubleshoot and repair electronic-mechanical equipment in a fast paced customer service environment.
Ability to drill/tap and remove screws.
Familiarity with the use of calipers and other measuring devices to verify part dimensions.
Possess a general knowledge of the use and operation of basic hand and power tools.
Experience with building and troubleshooting wiring harnesses.
Working knowledge of basic clutch and bearing systems.
Excellent knowledge of a motor and its internal components.
Required Education and Experience
Qualifications Include:
Candidate must have a minimum of an associate's degree or equivalent military experience in an electrical or mechanical field.
Candidate must have a minimum of 2 years verifiable experience as an Electrical /Mechanical Technician.
Normal work hours are 7:30 am to 4:00 pm
Must be flexible to work overtime as required
Drug and Background screening required post offe
________________________________________________________________________________________________
Visium Resources is an award-winning employment firm with a mission to match talented individuals with highly successful organizations. At Visium, our company's success is based on your success. When you work with us, you are never 'just a number'. You are our most important asset. Here, you will know us by name through our regular visits to client sites and even occasional luncheons. We will always be there when you need assistance and will always go the extra mile to ensure that you are as successful as possible. Whether you're looking for contract, contract-to-hire or permanent opportunities, we firmly believe there is no employment agency that will work harder for you than Visium.
Visium Resources is an equal opportunity employer and values diversity. All employment is decided based on qualifications, merit and business need.
Job Location: Buford, GA
Rate: Open
Per Diem: Poss
Overtime: Poss
Duration: 3 Mos - Direct
Start Date: ASAP
Input Date: 06/10/2025
Attention: Mike Forster
Address: 541 S ORLANDO AVE STE 201
City, State: MAITLAND, FL 32751
Phone: 321/397-1016
Website: www.myvisium.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic Repair Technician
Introduction
Visium Resources has been asked to identify qualified candidates for this Electronic Technician position. This position is either a contract or a direct hire opportunity, which must be on-site in Estacada, OR. This position is intended to be a direct hire within 3 months, possibly immediately.
Summary
The Electronic Technician will be responsible for Assembly, disassembly, quality testing, troubleshooting, and repair of electronic equipment in a customer service based environment.
This position is an opportunity to join a quality organization for a long term career opportunity.
Will accept very junior level candidates that are willing to learn and grow with the organization.
Normal work hours are 8:00 am to 5:00 pm
Must be flexible to work overtime as required
Qualified candidates would have the following:
Possess excellent written and oral communication skills.
Proficiency in DC-AC, solid state theory, audio signals, video signals, and applications.
Possess the ability to solder to the component level.
Ability to read and operate various measuring equipment related to electronics (Oscilloscope, digital multi-meters, signal analyzers, etc.)
Ability to accurately annotate and maintain repair documentation.
Possess good attendance and work ethic. Be punctual and have a good attendance record.
Perform assigned tasks in a safe, effective, and efficient manner.
Have the flexibility to work overtime when required.
Ability to work independently or as a member of a team.
Have excellent problem solving and decision making skills.
Possess basic computer skills.
Read and understand complex assembly drawings, schematics, and test procedures.
Test, troubleshoot and repair electronic equipment in a fast paced customer service environment.
Ability to drill/tap and remove screws.
Familiarity with the use of calipers and other measuring devices to verify part dimensions.
Possess a general knowledge of the use and operation of basic hand and power tools.
Experience with building and troubleshooting wiring harnesses.
Working knowledge of basic clutch and bearing systems.
Familiarity with the basic operation of motors.
Post Offer Background check and drug screening required
________________________________________________________________________________________________
Visium Resources is an award-winning employment firm with a mission to match talented individuals with highly successful organizations. At Visium, our company's success is based on your success. When you work with us, you are never 'just a number'. You are our most important asset. Here, you will know us by name through our regular visits to client sites and even occasional luncheons. We will always be there when you need assistance and will always go the extra mile to ensure that you are as successful as possible. Whether you're looking for contract, contract-to-hire or permanent opportunities, we firmly believe there is no employment agency that will work harder for you than Visium.
Visium Resources is an equal opportunity employer and values diversity. All employment is decided based on qualifications, merit and business need.
Job Location: Estacada, ORE
Rate: Open
Per Diem: Poss
Overtime: Poss
Duration: 3 Mos - Direct
Start Date: ASAP
Input Date: 06/10/2025
Attention: Mike Forster
Address: 541 S ORLANDO AVE STE 201
City, State: MAITLAND, FL 32751
Phone: 321/397-1016
Website: www.myvisium.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic Repair Technician
Introduction
Visium Resources has been asked to identify qualified candidates for this Electronic Repair Technician position. This position is a contract to direct hire opportunity, which is expected to be on-site in Orlando, FL for a duration of 3/4 months to direct hire with client.
Summary
The Electronic Repair Technician will be responsible for troubleshooting and repair of equipment, to component level.
A primary attraction of this Electronic Repair Technician is the opportunity to join a growing organization that values its employees and provides fair compensation and benefits. This position will be contract-to-direct, offering a career opportunity with a great company. The work environment is laboratory quality, indoor facilities with strong teamwork and recognition for work well done.
Qualified candidates would have the following:
Ability to perform troubleshooting and repair to component level, using standard tools, such as micrometers, calipers, soldering, scope and other lab equipment.
Strong electronic theory knowledge required.
Ability to pass drug and background pre-employment testing
Hours are M-F, 7am-3pm (flexible possible). with OT possible
________________________________________________________________________________________________
Visium Resources is an award-winning employment firm with a mission to match talented individuals with highly successful organizations. At Visium, our company's success is based on your success. When you work with us, you are never 'just a number'. You are our most important asset. Here, you will know us by name through our regular visits to client sites and even occasional luncheons. We will always be there when you need assistance and will always go the extra mile to ensure that you are as successful as possible. Whether you're looking for contract, contract-to-hire or permanent opportunities, we firmly believe there is no employment agency that will work harder for you than Visium.
Visium Resources is an equal opportunity employer and values diversity. All employment is decided based on qualifications, merit and business need.
Job Location: Orlando, FL
Rate: Open
Overtime: Poss
Duration: 3 Mos - Direct
Start Date: ASAP
Input Date: 06/10/2025
Attention: David Story
Address: 541 S ORLANDO AVE STE 201
City, State: MAITLAND, FL 32751
Phone: 321/397-1016
Website: www.myvisium.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic Repair Technician
Introduction
Visium Resources has been asked to identify qualified candidates for this Electronic Technician position. This position is either a contract or a direct hire opportunity, which must be on-site in Estacada, OR. This position is intended to be a direct hire within 3 months, possibly immediately.
Summary
The Electronic Technician will be responsible for Assembly, disassembly, quality testing, troubleshooting, and repair of electronic equipment in a customer service based environment.
This position is an opportunity to join a quality organization for a long term career opportunity.
Will accept very junior level candidates that are willing to learn and grow with the organization.
Normal work hours are 8:00 am to 5:00 pm
Must be flexible to work overtime as required
Qualified candidates would have the following:
Possess excellent written and oral communication skills.
Proficiency in DC-AC, solid state theory, audio signals, video signals, and applications.
Possess the ability to solder to the component level.
Ability to read and operate various measuring equipment related to electronics (Oscilloscope, digital multi-meters, signal analyzers, etc.)
Ability to accurately annotate and maintain repair documentation.
Possess good attendance and work ethic. Be punctual and have a good attendance record.
Perform assigned tasks in a safe, effective, and efficient manner.
Have the flexibility to work overtime when required.
Ability to work independently or as a member of a team.
Have excellent problem solving and decision making skills.
Possess basic computer skills.
Read and understand complex assembly drawings, schematics, and test procedures.
Test, troubleshoot and repair electronic equipment in a fast paced customer service environment.
Ability to drill/tap and remove screws.
Familiarity with the use of calipers and other measuring devices to verify part dimensions.
Possess a general knowledge of the use and operation of basic hand and power tools.
Experience with building and troubleshooting wiring harnesses.
Working knowledge of basic clutch and bearing systems.
Familiarity with the basic operation of motors.
Post Offer Background check and drug screening required
________________________________________________________________________________________________
Visium Resources is an award-winning employment firm with a mission to match talented individuals with highly successful organizations. At Visium, our company's success is based on your success. When you work with us, you are never 'just a number'. You are our most important asset. Here, you will know us by name through our regular visits to client sites and even occasional luncheons. We will always be there when you need assistance and will always go the extra mile to ensure that you are as successful as possible. Whether you're looking for contract, contract-to-hire or permanent opportunities, we firmly believe there is no employment agency that will work harder for you than Visium.
Visium Resources is an equal opportunity employer and values diversity. All employment is decided based on qualifications, merit and business need.
Job Location: Estacada, ORE
Rate: Open
Per Diem: Poss
Overtime: Poss
Duration: 3 Mos - Direct
Start Date: ASAP
Input Date: 06/10/2025
Attention: Mike Forster
Address: 541 S ORLANDO AVE STE 201
City, State: MAITLAND, FL 32751
Phone: 321/397-1016
Website: www.myvisium.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic Technician
Visium Resources has been asked to identify candidates for the following Electronic Technician position, located in Orlando, FL. This contract-to-hire position is an opportunity to join an excellent team, and begin a long term career with a national and continually growing successful organization. Strong electronics experience is needed with an emphasis on the following areas of skill:
Proficiency in DC-AC, solid state theory, audio signals, video signals, and applications.
Possess the ability to solder to the component level.
Ability to read and operate various measuring equipment related to electronics (Oscilloscope, digital multi-meters, signal analyzers, etc.)
Ability to accurately annotate and maintain repair documentation.
Possess good attendance and work ethic. Be punctual and have a good attendance record.
Perform assigned tasks in a safe, effective, and efficient manner.
Have the flexibility to work overtime when required.
Qualified candidates would have the following:
Ability to work independently or as a member of a team.
Have excellent problem solving and decision making skills.
Possess basic computer skills.
Read and understand complex assembly drawings, schematics, and test procedures.
Test, troubleshoot and repair electronic equipment in a fast paced customer service environment.
Ability to drill/tap and remove screws.
Familiarity with the use of calipers and other measuring devices to verify part dimensions.
Possess a general knowledge of the use and operation of basic hand and power tools.
Experience with building and troubleshooting wiring harnesses.
Working knowledge of basic clutch and bearing systems.
Familiarity with the basic operation of motors.
Possess excellent written and oral communication skills.
Qualifications Include:
Candidate must have a minimum of an associate's degree or equivalent military experience in an electrical field.
Candidate must have a minimum of 2 years verifiable experience as an Electronics Technician.
Working Conditions / Work Schedule / Travel
Normal work hours are 8:00 am to 4:30 pm
Must be flexible to work overtime as required
________________________________________________________________________________________________
Visium Resources is an award-winning employment firm with a mission to match talented individuals with highly successful organizations. At Visium, our company's success is based on your success. When you work with us, you are never 'just a number'. You are our most important asset. Here, you will know us by name through our regular visits to client sites and even occasional luncheons. We will always be there when you need assistance and will always go the extra mile to ensure that you are as successful as possible. Whether you're looking for contract, contract-to-hire or permanent opportunities, we firmly believe there is no employment agency that will work harder for you than Visium.
Visium Resources is an equal opportunity employer and values diversity. All employment is decided based on qualifications, merit and business need.
Job Location: Orlando, FL
Rate: Open
Overtime: Poss
Duration: 3 Mos - Direct
Start Date: ASAP
Input Date: 06/10/2025
Attention: Mike Forster
Address: 541 S ORLANDO AVE STE 201
City, State: MAITLAND, FL 32751
Phone: 321/397-1016
Website: www.myvisium.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronics Repair Technician II
Visium Resources has been asked to identify candidates for the following position, currently located in Piscataway, NJ.
****This position is a contract position until mid-March '22 and may have the opportunity to relocate to Orlando, FL after the contract.
Electronics Repair Technician II is responsible for the intermediate electronic maintenance, test, repairs, services, and
modifications of electronic equipment in accordance with FAA regulations.
Essential Functions / Key Areas of Responsibility
Troubleshoots and repairs electronic equipment to component level in accordance with FAA regulations and company IPM
(Inspections Procedures Manual)
Modifies equipment according to service bulletin and/or manufacturer documentation
Works independently or in collaboration with experienced electronics technicians
Carries out prescribed procedures according to an established schedule
Receives training in the use of more specialized test instruments and learn advanced troubleshooting procedures
Follows specific layout and schematic diagrams to repair and maintain simple or advanced devices or subunits of equipment and
schematic diagrams such as power supplies, oscillators, amplifiers, etc.
Review work orders to ensure customer requested activities have been complied with, prior to release of the repair
Work is reviewed by Technician IV, supervisors, and inspectors
May work on alternative assignments with detailed written or oral instructions
Completes quality and production paper work, prepares estimates, and maintains maintenance documentation in accordance with
current quality assurance requirements
Communicates with cross-functional departments as required to support repair process
Participates in Technician cross training programs and may be assigned to other teams for short or long term assignments
Completes repairs in accordance with company ISO procedures and within company objectives
Qualified candidates would have the following:
US Citizens or Green Card Holder required
Minimum of four (4) years related experience in servicing Aircraft electronics to a component level preferred in the commercial airline and/or aviation product support field or a two (2) year college level degree in an electronics related field. Must have understanding of Federal Aviation Regulations and other governing regulatory requirements
Able to meticulously document incoming product condition and maintenance activities
Pass a seven (7) year background check and pre-employment drug test
Legally eligible to work in the country in which the position is located
Familiarity with both analog and digital electronics, hardware and software
Must have experience using a PC (personal computer)
Ability to read and understand engineering drawings and wiring diagrams
Ability to understand and speak English in order to read technical literature, follow oral instructions and communicate with cross
functional team members.
Required to have an intermediate understanding of electronic theories and techniques and familiarity with standard electronic
components
Ability to use basic and advanced test instruments and perform adjustments as necessary
Willing to think out-of-the-box to solve operational and technical problems
Manual and Automatic Test Benches, PC, oscilloscope, and multi-meters
Preferred Qualifications
Prior military or commercial avionics level 3 component repair experience preferred
FAA Repair Certificate a plus
Understanding of Federal Aviation Regulations and other governing regulatory requirements
Able to meticulously document incoming product condition and maintenance activities
________________________________________________________________________________________________
Visium Resources is an award-winning employment firm with a mission to match talented individuals with highly successful organizations. At Visium, our company's success is based on your success. When you work with us, you are never 'just a number'. You are our most important asset. Here, you will know us by name through our regular visits to client sites and even occasional luncheons. We will always be there when you need assistance and will always go the extra mile to ensure that you are as successful as possible. Whether you're looking for contract, contract-to-hire or permanent opportunities, we firmly believe there is no employment agency that will work harder for you than Visium.
Visium Resources is an equal opportunity employer and values diversity. All employment is decided based on qualifications, merit and business need.
Job Location: Piscataway, NJ
Rate: Open
Per Diem: Poss
Overtime: Poss
Duration: 6 Mos +
Start Date: ASAP
Input Date: 06/10/2025
Attention: David Story
Address: 541 S ORLANDO AVE STE 201
City, State: MAITLAND, FL 32751
Phone: 321/397-1016
Website: www.myvisium.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Electrical - Secret
Job Knowledge/Technical Skills
Performs research, design, and development in such areas as power conditioning electronics, analog circuit design, digital circuit design, FPGA design, and other general electrical engineering design functions.
Applies research to the planning, design, development and testing of electrical circuits for use in military applications.
Is capable of generating design schematics preferably with experience using CAD tools such as Mentor Graphics.
Develops specifications for and performs selection of components for use in electrical circuits for military applications. Utilizes electrical CAD tools such as Mentor System Vision for circuit performance prediction in aid of circuit development.
Oversees board layout and provides pertinent design factors for first pass success on circuit realization.
Compiles and analyzes test data to determine effect of design on electrical circuits for military applications.
Possess strong analytical skills to enable risk analyses and management throughout program.
Possess strong interpersonal skills to work effectively within a development team to understand system level interdependencies that impact requirements and design constraints.
Preferably an understanding of Design for Six Sigma (DFSS) disciplines; including design for assembly / design for manufacturing (DFA/DFM).
Qualifications - External
Prerequisites:
Requires a minimum BSEE or BSCE +5 years or an MSEE +3 years from an accredited college.
Design experience in the areas of analog, digital, power conditioning, PWB/CCA design and evaluation, electronics packaging, processors and FPGAs. History of leading technical activities.
Experience in modeling and simulation of systems at various levels of integration.
Prefer experience in developing high reliability electronics to meet military environments such as extreme temperature conditions, high G shock loads, vibration, and extended storage times.
Ability to communicate clearly and effectively to cross functional team members.
Ability to work independently as well as in a team environment.
Ability to work effectively in a fast paced, rapidly changing, short turn-around environment.
Position may require occasional travel to meet with various customers, in both government and industry, and to interface with suppliers.
Experience in technical leadership of an electronics development program requiring the coordination of engineering work effort is preferred.
Required:
US Citizenship
Active Secret Clearance
Job Location: Minneapolis, MN
Rate: 65.00
Per Diem: Possible
Overtime: Possible
Duration: 12 Months
Start Date: ASAP
Input Date: 06/10/2025
Attention: Kerry Moreland, Sr
Address: 545 E JOHN CARPENTER FWY STE 950
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Website: www.pdstech.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Electronics ( Baltimore, MD ) 3552-1
Engineer Electronics ( Baltimore, MD ) 3552-1
12 Month Contract to direct
Pay rate: Open
Researches, designs, develops, and tests a variety of electronic equipment and systems, including radar and radiation detection equipment; radio, television and other communications equipment and systems; circuitry components; analog and digital computers; and control and test equipment.
'I’m looking for someone with several years of experience designing, analyzing, simulating, and testing power supplies. The candidate should also have experience as a technical lead guiding and advising small teams of power supply design engineers from the whole design process from concept through integration and test. I would want someone who is interested in converting to a permanent employee.'
Job Location: Baltimore, MD
Rate: Open
Per Diem: Yes
Overtime: yes
Duration: 12 Month
Start Date: ASAP
Input Date: 06/10/2025
Attention: Angelia
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Technician II
Are you looking for a challenging opportunity that leverages your technical expertise? We may have the position you are seeking!
As an Engineering Technician II, you will be using your skills and expertise to perform a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. You'll be responsible for constructing, troubleshooting, calibrating, testing, and maintaining our equipment, components, devices, or systems. You'll ensure our systems and components meet established specifications.
Must-haves:
*Associate's degree in a related field of study and at least 2 years of relevant experience
*A higher level degree may substitute for experience
*Related experience may be considered in lieu of required education
*Ability to read and understand mechanical and electrical drawings, diagrams, schematics, and manuals
*Ability to work with standard laboratory test equipment, other measurement equipment, hand tools, and power tools
Preferred:
*Previous experience and/or certifications within the aerospace and defense industry
*Previous experience in a manufacturing environment
*Experience with AutoCAD or other 3-D CAD software
*The ability to obtain and maintain a Security Clearance may be required Learn more about *the background check process for Security Clearances
IMPORTANT NOTICE:
To conform to U.S. Government international trade regulations, applicant must be a U.S. Citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State or U.S. Department of Commerce.
Rate: $25/HR - $29.50/HR
Per Diem: Possible
Overtime: Possible
Duration: Long Term Contract
Start Date: ASAP
Input Date: 06/10/2025
Attention: Corey Halliday
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Experience Systems Engineer 3
This is a very exciting opportunity to work with one of the world's largest aerospace companies!
The contracts are regularly extended and direct opportunities are often available.
Description:
Experience Systems EngineerApplies an interdisciplinary, collaborative approach to plan, design, develop and verify a lifecycle balanced system of systems and system solutions. Evaluates customer and /operational needs to define and coordinate system performance requirements, integrate technical parameters and assure compatibility of all physical, functional and program interfaces. Performs various analyses to optimize total system of systems and/or system architecture. Performs analyses for affordability, safety, reliability, maintainability, testability, human systems integration, survivability, vulnerability, susceptibility, system security, regulatory, certification, product assurance and other specialties quality factors into a preferred configuration to ensure mission success. Develops the planning, organization, implementation and monitoring of requirements management processes, tools, risk, issues, opportunity management and technology readiness assessment processes. Resolves cross-functional technical issues.
Responsibilities May Include:
Apply interdisciplinary, collaborative approaches to plan, design, develop and verify system solutions.
Define and coordinate system performance requirements and integrate technical parameters.
Develop and document electronic and electrical system requirements
Perform analysis to optimize total system and/or system architecture to solve complex missile defense problems.
Define high level functional and performance requirements and verification methods, subsequent analysis, decomposition, and derivation of requirements, allocation of those lower-level requirements to physical and functional architectural elements, and tracking them through design, verification, integration, and operational validation
Develop verification and validation methods, processes, logic, and plans in support of program milestones.
Analyze and translate requirements into system architecture, hardware and software designs and interface specifications
Perform analyses for affordability, safety, reliability, maintainability, testability, survivability, human systems integration, survivability, vulnerability, susceptibility, system security, regulatory, certification, product assurance, product security (cyber security) and other specialties quality factors into a preferred configuration to ensure mission success.
Utilization of Model-Based Systems Engineering (MBSE) tools such as DOORS, Cameo, and mathematical modeling and simulation to develop system definitions and perform trade studies in assigned areas
Systems and Performance Analysis, Model & Sim, Algorithm Development Responsibilities May Include:
Evaluate systems under various scenarios and architectures to determine and/or optimize overall system mission performance in a framework giving insight into performance
Perform analysis to optimize total system of systems and/or system architecture to solve complex missile defense problems.
Develop and maintain analysis tools of varied fidelity including modeling and simulation tools to predict performance against evolving threats of current and future missile defense systems
Perform systems analyses of the existing system architecture in conjunction with new technologies and concepts for improvements to be considered for future architectures
Develop, refine and document key algorithm capabilities to support various DoD customers
Conducts analysis of multiple targets discrimination for survivability, vulnerability, and susceptibility into a preferred configuration to ensure mission success
Model Based Engineering / Systems Engineering
Development of Model-Based Systems Engineering (MBSE) tools, processes and architectures
Configuration, data and work flow management of program specific MBSE tools and processes
Establishment of protocol / process for integration of engineering tools with MBSE
Examples of current open positions / typical work scope:
Model Based Engineering Team:
of Model-Based Systems Engineering (MBSE) tools, processes and architectures for missile and weapons systems. Responsible for tailoring and deploying MBE/MBSE techniques to MWS Programs.
Preferred Qualifications (Desired Skills/Experience):
Experience applying systems engineering processes and principles
Experience/domain knowledge of system architecture, requirements, interface definition, verification, and validation
Experience with complex systems development and integration
Experience modeling or simulating complex systems
Experience with implementation and maintenance of systems engineering tools, schedules and metrics (i.e. Earned value management, DOORs, CAMEO)
Experience with Model Based Systems Engineering
Understanding of statistical analysis, distributions, and sampling
6 months possible extension
This position requires that you work on-site in OKC, candidate must be local or willing to relocate at own expense
This position requires that you work on-site in OKC, candidate must be local or willing to relocate at own expense
The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.
We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.
We have a national medical, dental and vision plan with United Healthcare and we also have a robust 401K offering. In some cases there is bonus potential, sick pay and holiday pay for those who qualify.
The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)
The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)
Job Location: Oklahoma City OK
Per Diem: --
Overtime: --
Start Date: 2022-01-10
Input Date: 06/10/2025
Attention: Kimra Stone
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fabrication Specialist
JOB DESCRIPTION
Performs machine set-up, machining, welding set-up, welding, sheet metal fabrication and extrusion, tube bending and fabrication tasks. Performs composite lay-up, fabrication and assembly tasks. Assembles precision mechanical and electro-mechanical components. Assembles, repairs, modifies and installs various power plants and drive trains. Perform soldering on electronic and avionics products. Assembles and installs wire harnesses and avionics products. Prepares test articles, fixtures and data collection devices to perform various tests. Performs basic organic chemical conversion and paint preparation. Applies routine organic coatings for corrosion protection and appearance requirements. Works on articles of moderate complexity using established drawings and requirements.
OTHER
-Onsite position only
-20 positions
-These positions are available for 1st OR 2nd shift: (6:45am-3:30pm OR 3:30pm-12am)
Job Location: Salt Lake City, UT
Rate: 21HR
Input Date: 06/10/2025
Attention: Diego villegas
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Integration Engineer
An Integration Engineer 2 role located in Kirkland, WA is currently available through Belcan. The Integration Engineer 2 will support development and test of aircraft electrical power generation, conversion, and distribution equipment, and qualification testing of development programs such as starter generators and electronic circuit breakers.
Integration Engineer 2 duties:
* Develop and perform circuit card level and unit level testing to ensure a successful product
delivery to customer's aircraft.
* Develop and document test equipment to support lab testing.
* Provide technical assistance to senior staff in support of current programs.
* Prepare and review custom test equipment drawings and designs, using electrical and
mechanical hardware and software, with guidance from other engineers, to enable test of
aircraft electrical power equipment.
* Analyze and solve a variety of technical problems through use of test data and specification
requirements. Organize and analyze data and document results. Review results to ensure their
accuracy and appropriateness.
* Prepare and present technical information of limited scope for internal engineers, program
personnel, and other internal customers.
* Acts as an individual contributor, building stable working relationships internally through tasks
and assignments.
* Guide internal technicians as required in performing system integration and development tests
and custom test equipment build.
EDUCATION AND EXPERIENCE REQUIRED:
* Electrical engineering background with a Bachelor of Science - Electrical Engineering degree.
* 2 plus years of experience
* Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder), or
lawfully admitted into the U.S. as a refugee or granted asylum.
If you are interested in this Integration Engineer 2 role located in Kirkland, WA please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.
Job Location: Kirkland, WA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 06/10/2025
Attention: ScottWatkins
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Integration Engineer
An Integration Engineer 2 role located in Kirkland, WA is currently available through Belcan. The Integration Engineer 2 will support development and test of aircraft electrical power generation, conversion, and distribution equipment, and qualification testing of development programs such as starter generators and electronic circuit breakers.
Integration Engineer 2 duties:
* Develop and perform circuit card level and unit level testing to ensure a successful product
delivery to customer's aircraft.
* Develop and document test equipment to support lab testing.
* Provide technical assistance to senior staff in support of current programs.
* Prepare and review custom test equipment drawings and designs, using electrical and
mechanical hardware and software, with guidance from other engineers, to enable test of
aircraft electrical power equipment.
* Analyze and solve a variety of technical problems through use of test data and specification
requirements. Organize and analyze data and document results. Review results to ensure their
accuracy and appropriateness.
* Prepare and present technical information of limited scope for internal engineers, program
personnel, and other internal customers.
* Acts as an individual contributor, building stable working relationships internally through tasks
and assignments.
* Guide internal technicians as required in performing system integration and development tests
and custom test equipment build.
EDUCATION AND EXPERIENCE REQUIRED:
* Electrical engineering background with a BSEE degree.
* 2 plus years of experience
* Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder), or
lawfully admitted into the U.S. as a refugee or granted asylum.
If you are interested in this Integration Engineer 2 role located in Kirkland, WA please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.
Job Location: Kirkland, WA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 06/10/2025
Attention: ScottWatkins
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II - 2nd Shift (Contract)
Do you enjoy collaborating with others to create innovative products and services? You will work in multidisciplinary teams to bring concept of operations to fruition to further our customers' mission objectives. You will work both independently and as part of a team. Join us!
- As a manufacturing engineer, you will research, design, develop, test, certify, deploy and improve cutting edge products and services. These cover a very wide range from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. You'll consult with program management, design engineers, quality, and production teams in order to develop the most efficient and cost effective means of producing our products at the highest level of quality possible. Your technical duties involve reviewing engineering designs for producibility and the development of tooling and fixtures, work instructions, production process and procedures. You will be involved in the application of manufacturing technologies and industry best practices during the design and development of new products and processes throughout the product lifecycle.
Must-haves:
Bachelor's of Science degree in related discipline and typically 3 or more years of relevant experience
Experience with Computer Aided Engineering tools
Practical knowledge of engineering principles and practices
Capability working in multi-disciplinary teams
Preferred:
Familiarity in applying and interpreting Geometric Dimensioning and Tolerancing (GD&T) per ASME Y14.5
Background in adhesive or bonding technologies
Experience with vacuum bagging applications
Experience with 3d printing
Background in the Aerospace and Defense Industry
Experience with work instruction/traveler development
Participation in dispositions of Non-Conformance generation through a Material Review Board (MRB)
Experience with new product introduction and transition to production
Exposure to Product Lifecycle Management (PLM), Manufacturing Execution System (MES), and Manufacturing Resource Planning (MRP) systems
IMPORTANT NOTICE:
To conform to U.S. Government international trade regulations, applicant must be a U.S. Citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State or U.S. Department of Commerce.
The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)
Job Location: Louisville CO
Per Diem: --
Overtime: --
Start Date: 2022-01-26
Input Date: 06/10/2025
Attention: Corey Halliday
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II - 2nd shift (Contract)
Do you enjoy collaborating with others to create innovative products and services? You will work in multidisciplinary teams to bring concept of operations to fruition to further our customers' mission objectives. You will work both independently and as part of a team. Join us!
- As a manufacturing engineer, you will research, design, develop, test, certify, deploy and improve cutting edge products and services. These cover a very wide range from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. You'll consult with program management, design engineers, quality, and production teams in order to develop the most efficient and cost effective means of producing our products at the highest level of quality possible. Your technical duties involve reviewing engineering designs for producibility and the development of tooling and fixtures, work instructions, production process and procedures. You will be involved in the application of manufacturing technologies and industry best practices during the design and development of new products and processes throughout the product lifecycle.
Must-haves:
Bachelor's of Science degree in related discipline and typically 3 or more years of relevant experience
Experience with Computer Aided Engineering tools
Practical knowledge of engineering principles and practices
Capability working in multi-disciplinary teams
Preferred:
Familiarity in applying and interpreting Geometric Dimensioning and Tolerancing (GD&T) per ASME Y14.5
Background in adhesive or bonding technologies
Experience with vacuum bagging applications
Experience with 3d printing
Background in the Aerospace and Defense Industry
Experience with work instruction/traveler development
Participation in dispositions of Non-Conformance generation through a Material Review Board (MRB)
Experience with new product introduction and transition to production
Exposure to Product Lifecycle Management (PLM), Manufacturing Execution System (MES), and Manufacturing Resource Planning (MRP) systems
IMPORTANT NOTICE:
To conform to U.S. Government international trade regulations, applicant must be a U.S. Citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State or U.S. Department of Commerce.
The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)
Job Location: Louisville CO
Per Diem: --
Overtime: --
Start Date: 2022-01-26
Input Date: 06/10/2025
Attention: Corey Halliday
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Planners // Multiple Positions
Manufacturing Engineer OR Planner 4
Location: San Antonio, TX
Duration: 8+ Months
Note: Bachelor’s degree is needed for Engineering and not for planner roles
Description:
Plans and leads department/organization processes for developing, implementing and maintaining various manufacturing plans, Bill of Materials, work instructions and illustrations to define and document as-built configuration. Develops and plans manufacturing concepts and strategies to support business objectives. Prepares build analyses and cost estimate reports. Leads integration of complex suppliers, processes, materials, data and technology to meet manufacturing and delivery requirements. Participates in source selection to ensure manufacturing requirements are met. Develops complex tooling requirements based on manufacturing and engineering requirements. Manages tooling from initial design to end of use disposition. Leads investigation and resolution of complex or systemic manufacturing related issues. Leads teams performing producibility assessments of design concepts. Supports enterprise level benchmarking to incorporate best practices. Leads development of complex work statements and sequencing of events to support delivery commitments. Develops scheduling templates for use by others. Drafts, updates and reviews processes and procedures to support business and regulatory agency requirements. Develops and documents new job practices, techniques and standards. Works under minimal direction.
Review Wire Harness Assembly (WHA) engineering design releases, ensuring producibility of designs and configuration management control (i.e. engineering changes). Knowledge & application experience/use of the Client WIRS system is desired (familiarity of resident reports a plus). Experience with all aspects of Wire Harness Assembly change management / processing / implementation a plus. Knowledge & demonstrated use of the Client WIRS system and Client’s Integration Visibility Tool (IVT) desired.
Experience with Wiring component standards/sourcing/supply base a plus.
Looking for experience in Functional/Flight Test, Interiors, Wiring, Payloads specifically.
Perform producibility reviews of Electrical Production Illustration drawings (Wiring Installation Drawings), and Electrical Provisions (support bracketry - details/Assemblies/Installations), ensuring design for manufacturability standards are supported and represented.
Support and drive the development, implementation, and maintaining of Electrical build plans, Bill of Materials, and Work Instructions to define and document the as-built airplane configuration. Support integration activities associated with suppliers, process development and/or enhancements, procurement kitting, and data/technology analysis to meet manufacturing and deliverable requirements.
Experience / Familiarity with all aspects of Wire Harness installation, Pre-Installation and Post-Installation Wire Harness Assembly Testing (Fully terminated Wire Harnesses, and Termination performed on aircraft), and the ability to develop wiring tooling requirements based on manufacturing and engineering requirements. Experience / familiarity with different aspects of Wire Harness testing desired.
General experience with typical committed change processes, and the ability to author impact statements in support of, desired.
Experience / familiarity with certificate of conformance, and conformity support actions in general, a plus.
Knowledge of Microsoft Office tools a must; focus being on advanced excel data analytical skills.
Knowledge of Jira Software, a plus.
Ability to work under minimal direction. Able to work within team assigned, and possess the experience to know when to reach out to other teams when warranted.
Skill Code: 67B-Electrical/Electronics
Rate: Open
Per Diem: Split
Overtime: Yes
Duration: 8 months
Start Date: ASAP
Input Date: 06/10/2025
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Quality Engineer
A Manufacturing Quality Engineer job is currently available at Belcan in Santa Clara, CA. This is a full time, long term contract position. Great matching candidates will have at least three years of experience in the quality engineering field ideally within the aerospace & electronics industries. You will be performing various quality engineering tasks within both shop and office settings: FAI's, inspection techniques, ISO 9001 & AS9100 quality practices, creation of standard work, supplier assessments and approvals, and root cause/corrective actions (RCCA).
Manufacturing Quality Engineer job duties:
* Creation and modification of standard work for internal quality processes
* Assist team in tracking, documenting, and dispositioning non-conforming hardware using various quality tools.
* Inspection of parts (if needed) at the customer facility, and also local third part facility.
* Engineering drawing review and approvals
* Review of FAI (first article inspection) reports and validity of part conformance
* Creation of quality notifications within SAP, with ability to disposition quality notifications accurately.
* Determine and help implement corrective action and mistake proofing
* Supplier assessments and approval
* Supplier Development
Qualifications:
* Legal authorization to work in the US required: Due to the nature of this work, US CITIZENSHIP is required
* Associate degree in Engineering (minimum)
* Three+ years of quality engineering experience within the aerospace industry
* Strong familiarity with IPC-A-610; certification desired
* Knowledge of ISO and AS9100 quality requirements
* Knowledge of manufacturing practices
* Knowledge of blueprints and supporting specifications
* Familiarity with PPAP or PFMEA's
* Familiarity of using statistical analysis (SPC)
Desired but not required skills:
* SAP knowledge
* Lean Six Sigma experience
* External (supplier) auditing experience
If you are interested in this Manufacturing Quality Engineer job in Santa Clara, CA please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.
Belcan is an equal opportunity employer. EOE/M/F/D/V
Build a challenging and rewarding career with an industry leader!
www.BELCAN.com
Job Location: Santa Clara, CA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 06/10/2025
Attention: VanessaRiley
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Recruiter
If you are looking for a challenging opportunity that will ignite your passion for designing cool and innovative products, are exceptionally creative, are a great problem solver and can make things happen - apply today!
As the Manufacturing Recruiter, you will be responsible for engaging in direct and indirect recruiting strategies to increase company exposure, branding, and reputation. In addition, we need you to conduct deep internet mining for passive candidates and make sound judgments on talent and exercise discretion in making independent decisions. As our Manufacturing Recruiter you will be responsible for sourcing, identifying, qualifying, interviewing, and presenting candidates to hiring managers. You will also be responsible for recruiting at all levels of talent spanning multiple skills, with strong focus on professional and exempt level positions. You will work independently on multiple projects with a strong ability to effectively prioritize and produce results within set timelines.
Your Mission
Work with hiring managers to accurately define position duties and requirements, developing clear job descriptions and effective job postings. Identify likely ways to effectively source candidates for difficult to fill positions.
Aggressively recruit well-qualified applicants from a variety of sources including cold calling, sourcing from various Job Boards, User Groups, networking, electronic advertising and occasional career fairs. Assist hiring managers to identify and implement effective pre-screening techniques for each position. As appropriate, coordinate phone interviews, testing, practical assessments, on-site interviews and any required travel.
Conduct in-depth telephone assessments of candidates using comprehensive behavioural interviewing and work history reviews
Lead interviewer debrief sessions and provide recommendations on hiring.
Sell the company's value proposition to candidates and successfully negotiate offers and relocation packages.
Support relocation, on-boarding and post-hire follow-up for new hires, including developing effective resources and materials.
Identify, initiate and/or participate in various efforts to continuously improve the staffing life cycle.
Participate in recruitment strategy sessions to discuss best practices in sourcing, recruiting tools, market trends and improve workflow efficiency.
Generate recruitment activity reports and drive regular status meetings with hiring teams.
What you bring
A minimum of 2 years of heavy recruiting experience, ideally in aerospace, a start-up organization or a highly unique cultural environment.
Possess an established track record of developing strong relationships with potential employees.
Able to accurately vet technical resumes and conduct in depth technical interviews.
Experience at providing consultative recommendations and influencing hiring teams.
Fearless networker and cold caller with an understanding of how to build and track candidates.
Excellent verbal and written communication skills, and effective communication in formal and informal settings with senior executives, peers and candidates.
Excellent negotiator with a confidence-inspiring manner, and a keen sense of determination and urgency. Have a strong customer focus when dealing with both hiring managers and candidates.
ITAR Requirements
To conform to U.S. Government space technology export regulations, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by ITAR (22 CFR 120.15) or eligible to obtain the required authorizations from the U.S. Department of State.
The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)
Job Location:
Per Diem: --
Overtime: --
Start Date: 2022-02-25
Input Date: 06/10/2025
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NC Engineer III
Inconen is looking for an NC Engineer III for our client, a well-known Aerospace Company, in Savannah, GA.
**Candidates must be a U.S. Citizen or Permanent Resident**
Unique Skills:
Extensive machine shop, CNC programming and GD&T knowledge. Experience with analyzing, vetting and quoting parts for fabrication. Skilled at fabrication and manufacturability reviews. Excellent customer service skills, comfortable engaging and discussing technical manufacturing aspects of machine shop projects with machinists and design engineers alike.
Education and Experience Requirements:
Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Four (4) years machining, planning, tool design, or related manufacturing experience to include 2 years of experience as numerical control engineer.
Position Purpose:
Under minimal supervision, perform activities related to complex numerical control (NC) programming, including machining methods, tooling concepts, and programs for NC milling machines and lathes.
Principle Duties and Responsibilities:
Essential Functions: 1. Conduct a thorough analysis of engineering drawings, tool design drawings, and/or electronic models, to determine the optimal machining methods, selection of machine tool, and material cut size. 2. Interact with planners, tool designers, engineering, and customers as required, to finalize plan. 3. Develop cutter motion logic per operation sequence, selecting proper spindle speeds and feed rates. 4. Perform a thorough check on all aspects of the program and verify cutter paths through the utilization of Vericut. 5. Develop operator set-up sheets for numerical control machines. 6. Develop flat pattern mylars and templates as required. 7. Produce 2-D Catia tool drawings as required. 8. May act as Team Leader as required, assigning work tasks, maintaining work load schedules, and setting priorities to ensure timely completion of department goals and corporate objectives.
Additional Functions: 1. Assist in training and guiding lower level engineers as needed. 2. Assist in formulating Numerical Control policies, procedures, and specifications as required. Perform other duties as assigned.
Other Requirements: 1. Excellent verbal and written communication skills required. 2. Strong knowledge of various machining and drafting methods, technical writing, and computer use. 3. Ability to read and interpret complex blueprints and engineering drawings. 4. Must be highly proficient with Catia modeling, drafting, and Catia NC Mill function. 5. Must have demonstrated expertise and a proven track record in support of company policies and rules, and consistently meeting objectives.
Job Location: Savannah, GA
Rate: $58.00 - $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 06/10/2025
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NDT Technician
The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.
We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.
We have a national medical, dental and vision plan with United Healthcare and we also have a robust 401K offering. In some cases there is bonus potential, sick pay and holiday pay for those who qualify.
Your Mission
Responsible for accomplishing assigned inspection work on space flight system hardware, assemblies and vehicles.
Conducts inspections utilizing a variety of NDT methods which may include but are not limited to ultrasonic, penetrant, x-ray, eddy-current, and thermal/infrared and laser shearography.
Properly utilize NDT test equipment and associated tools to successfully interrogate hardware and structures, make decisions as to their acceptability for continued use and keep abreast of new and advanced test equipment.
Operate manual and automated NDT equipment.
Shall be required to document inspection results in both paper and electronic forms as well as complete and sign work records in connection with work performed.
Inspects parts, sub-assemblies and completed assemblies to the extent necessary to determine, accomplish and approve acceptability in accordance with written procedures.
Will be required to, but not limited to be working on check aircraft.
Assist with development of procedures and techniques for non-destructive testing of metallic and composite structures.
Support training of other NDT personnel using hands-on knowledge from the vehicles via different mediums as appropriate.
Excellent attendance, ability to work overtime, and other shifts as required.
What you bring
Must have successfully completed minimum training requirements defined in NAS 410, ATA 105, or ASNT-SNT-TC-1A for a Level 2 inspector in UT and PT. Training in other NDT methods is desirable.
Must have recent, documented hours, working as a NDT inspector and have obtained sufficient experience to be certified in accordance with NAS 410, ATA 105, or ASNT-SNT-TC-1A.
Must have strong working knowledge of composite aircraft and/or aerospace non-destructive testing processes in composite material.
Ability to conduct inspections with limited supervision.
Minimum 5 years aviation/aerospace industry experience desired.
Excellent computer skills. Skilled in working in Microsoft Office applications.
Experience on narrow body and/or business jet aircraft preferred.
Experience with composite aircraft is preferred although not required (commercial or military aerospace application).
Must display maturity of action and judgment.
Must be able to work under pressure and thrive in a fast-paced environment.
Good communication skills.
Ability to read, interpret, and communicate blueprints, specs, and other technical documents.
Physical and/or Additional Requirements
Perform physical requirements of the position, including use of inspection hand tools, NDT equipment, lift up to 50 lbs., pass eye examination.
Willing to work overtime, all shifts, travel and be on-call as necessary.
The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)
Rate: 35-50
Per Diem: Possible
Overtime: Possible
Input Date: 06/10/2025
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Packaging Design Engineer
A Packaging Design Engineer job in Palo Alto, CA is currently accepting applications. This is a contract position with our key aerospace client. In this role, you will be responsible for the design, analysis, prototype build, and testing of an actuated mechanism on the aircraft. To be considered for this role, you will have a B.S. Degree in Engineering along with at least two (2) years of relevant Mechanical Design experience of high power electronic assemblies like power supplies, converters, drive inverters or chargers.
Packaging Design Engineer Job Responsibilities:
* Design Power Electronics components like plastic housings, sheet metal brackets, insulation systems, high voltage connectors, fasteners, structural supports, transformers, etc.
* Collaborate with other mechanical, systems, electrical, safety and manufacturing engineers to optimize your design for overall vehicle performance.
* Analyze designs to ensure they meet requirements using heat transfer, thermal analysis, design for assembly, structural calculations, and failure mode analysis, etc.
* Develop engineering test plans for designs.
* Solve electrical design challenges like thermal management, HV electrical isolation, HV interconnects, shock and vibration survival, environmental sealing, electromagnetic interference, etc.
* Create component drawings and work with suppliers to manufacture your designs.
* Lead engineering prototype builds and design validation testing.
Packaging Design Engineer Job Requirements:
* B.S. Degree in Engineering
* 2+ years of relevant Mechanical Design experience.
* Experience designing components for high power electronic assemblies like power supplies, converters, drive inverters, chargers, etc.
* Demonstrated ability to design packaging for an electronics systems from a blank sheet to production.
* Experience with PCBA mechanical design.
* Experience shipping high-volume electronics products.
* Strong mechanical design analytical skill in structural analysis, fluids, thermals, heat transfer, materials, etc.
* Strong 3D design experience and skill, preferably with NX and/or SolidWorks.
* Basic understanding of electrical design fundamentals.
* Basic Matlab or Python skill.
* Familiarity with thermal and structural finite element analysis methods and tools (STAR CCM, ANSYS, ICEPACK, COMSOL).
* Experience with GD&T, design for reliability, and design for manufacturing.
* Experience with product life management systems, including BOMs and engineering change orders.
* Experience with high volume manufacturing processes such as injection molding, stamping, soldering, welding, diecast, PCB fabrication, etc.
If you are interested in this Packaging Design Engineer job in Palo Alto, CA, please apply via the 'apply now' link provided.
Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.
Job Location: Palo Alto, CA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 06/10/2025
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Instrumentation Engineer
In this role you can expect to lead a small team of engineers and technicians through a fast paced, cutting-edge flight test program. You will be responsible for designing, procuring, installing and troubleshooting the onboard data acquisition system on an exciting new aircraft project.
Ongoing engineering R&D work can be expected upon completion of the flight test project. Following the flight test program, you will work on the research and design of aerospace electrical and electromechanical systems, participate in environmental qualification testing, take part in flight test data acquisition and data reduction, write technical certification documents, and assist in manufacturing, installation, and product life cycle ongoing support.
This job will be primarily based at a test location in Washington State. Occasional travel to home office in Sandpoint, Idaho can be expected. Travel is required.
Job Description: Own the development, design, engineering and function of an onboard flight test data acquisition system. Position reports to Program Lead Engineer. Other expected duties include:
Define requirements for onboard data acquisition and telemetry system
Direct small team of engineers & techs to meet the needs of the program
Design and implement hardware and software solutions for ground and flight test
Work closely with vendors and partners
Install sensors, wiring, an any required electronic equipment in experimental test vehicle
Generate and review wiring diagrams, bill of materials, and installation drawings
Prepare data system for daily test execution
Calibrate, validate, document, and troubleshoot all installed sensors and equipment
Participate in ground, bench, and flight tests.
Data capture, storage, processing and analysis.
Draft proposals, cost estimates, plans, reports, and other documents as required
Review technical drawings and service documents to ensure compliance with engineering specifications and regulations
Qualifications:
10+ years instrumentation experience in experimental flight test
Experience leading an instrumentation effort is strongly preferred
Experience in Data Acquisition and software integration
Applicant must have experience using MS Excel, and MS Word
Applicant must demonstrate good technical writing skills
Must be able to communicate clearly and effectively within a multi-disciplinary team structure.
Fluency in written and spoken English is required
Education:
B.S. in Electrical Engineering or equivalent.
The Structures Company LLC is an AA/EOE.
Job Location: Arlington, WA
Rate: Up to $80/Hr., DOE
Per Diem: Possible
Duration: 6-12 Months, possibly longer
Start Date: ASAP
Input Date: 06/10/2025
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Review Engineer 2 - Liaison Engineering
Description
Applies basic knowledge of design and/or engineering principles to develop interim or final engineering solutions to product/process issues throughout production and/or for technical, operational and quality issues that cannot be resolved by the customer. Analyzes, conducts failure analysis, root cause analysis and troubleshoots to understand root cause. Provides assistance to identify solutions. Provides written dispositions for routine design non-conformances. Supports activities to identify deviations that could impact design intent and safety and product/process improvements. Develops routine customer correspondence for continued safe operation and maintenance of equipment. Participates in Material Review Boards and Integrated Product Teams (IPTs). Ensures supplier and build partner comply with Boeing standards. Represents the engineering community in the build through post production environment. Recommends simple non-destructive test procedures, tools, standards. Conducts simple static strength analysis to validate interim design repairs meet original design loads criteria.
Required Skillsets:
1+ years of hands Electronics troubleshooting experience
ENG Degree Required
Preferred:
RF Experience
Education / Experience: Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 2 or more years' related work experience or an equivalent combination of technical education and experience (e.g. Master). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.
Job Location: Heath, OH
Rate: DOE
Per Diem: Yes
Overtime: Yes
Duration: 6-12 months+
Start Date: ASAP
Input Date: 06/10/2025
Attention: Garrett Smart
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Production Manager
Introduction
Visium Resources has been asked to identify qualified candidates for this Production Manager position located in Orlando, FL. This position is a direct hire opportunity which is expected to be on-site.
Summary
The Production Manager role is a position leading mechanical/electrical assemblers in solder, general assembly, fabrication, and test. Responsibilities include planning of hardware through assembly processes, status reporting and management of quality and schedule goals for multiple work cells / areas.
Job Description:
Job Duties and Responsibilities:
Overall leadership of mechanical and electrical assemblers
Overall leadership of all technicians
Management of production schedule ensuring meeting objectives for deliveries, cost, and quality
Conduct hiring and releasing of workers as required to maintain production schedules
Create a work environment conducive to increasing employee morale and motivation to accomplish performance objectives
Supervise and evaluate performance
Ensure training plans are implemented and effective
Build a flexible team though cross training initiatives
Maintain good employee relations and adherence to policies and procedures
Take appropriate disciplinary actions as required
Confers with other supervisors and managers to coordinate operations and activities within or between departments to everything is running with appropriate parameters
Develop and maintain visual management tools including Key Performance Indicator (KPI) boards and performance charts to monitor progress to goals, prioritize issues and drive actions
Ability to supervise across multiple shifts as needed
Drive continuous improvement activities
Improve processes to eliminate wasteful practices within the department
Maintain neat and clean work areas and ensure compliance with safety and 5S standards; ensure a safe work environment for all employees
Ownership of all production floor activities
Suggests production equipment changes, plant layout changes, employee headcount, etc. to meet initiatives
Qualified candidates would have the following:
Knowledge, Skills, & Abilities:
Must have strong technical and electronics background
Must have strong communication written and oral
Ability to build effective relationships
Ability to resolve conflict.
Must be able to work in a fast paced, flexible environment, including overtime periods, as needed.
Familiar with lean manufacturing techniques
Ability to work with engineering teams across multiple platforms, departments, etc.
Strong Microsoft Excel experience
Strong MRP experience
Prior leadership experience in complex manufacturing environment is desired
Experience with tracking, scheduling, managing cost and quality in a manufacturing environment
Minimum 2 years of experience working in a leadership/supervisory environment or related technical experience in the defense industry.
AS or BS degree in Electronics, Electrical Engineering, Electronics Engineering
4-year degree in Business, Industrial Engineering or similar field with applicable electronic manufacturing and technician experience is also acceptable.
Must be able to obtain a Security Clearance
________________________________________________________________________________________________
Visium Resources is an award-winning employment firm with a mission to match talented individuals with highly successful organizations. At Visium, our company's success is based on your success. When you work with us, you are never 'just a number'. You are our most important asset. Here, you will know us by name through our regular visits to client sites and even occasional luncheons. We will always be there when you need assistance and will always go the extra mile to ensure that you are as successful as possible. Whether you're looking for contract, contract-to-hire or permanent opportunities, we firmly believe there is no employment agency that will work harder for you than Visium.
Visium Resources is an equal opportunity employer and values diversity. All employment is decided based on qualifications, merit and business need.
Job Location: Orlando, FL
Rate: Open
Overtime: Poss
Duration: Direct
Start Date: ASAP
Input Date: 06/10/2025
Attention: Vanessa Wise
Address: 541 S ORLANDO AVE STE 201
City, State: MAITLAND, FL 32751
Phone: 321/397-1016
Website: www.myvisium.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Assurance Certification Specialist II
Inconen is looking for a Quality Assurance Certification Specialist II for our client, a well-known Aerospace Company, in Savannah, GA.
**Candidates must be a U.S. Citizen or Permanent Resident**
Unique Skills:
Working knowledge of FAA Part 21 regulations and aircraft certification processes in a Type Certificate program. Detail oriented with ability to interrogate and compare data for accuracy within systems; data tables, reports, technical documents and other records required to support conformity processes. Flexibility to work varied hours or weekends as necessary to support aircraft testing schedule. Prepare data reports, resolve data issues by interfacing with multiple organizations. Experience and high degree of comfort working with large data sets required. Experience with SAP; Solumina; SmarTeam and MS Excel preferred. Demonstrated experience with data validations, data integrity and regulatory reporting desired.
Education and Experience Requirements:
Bachelor's Degree in Engineering, aviation sciences, quality systems or related field required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 2 years related technical experience of continually increasing responsibility.
Position Purpose:
In a team-oriented environment, performs all tasks in area of responsibility in a timely and efficient manner to support aircraft certification activities performed by FAA Principal Inspectors or Gulfstream ODA IARs. Ensures the article and all associated data supports and presented for certification meets requirements in accordance with the approved Quality Assurance System and the ODA (ODA-511131-CE) Operations Manual.
Principle Duties and Responsibilities:
Essential Functions: 1. Coordinates article & aircraft certification activities to program schedule and milestones. 2. Manipulates and maintains large data sets related to configuration, article traceability and conformity of aircraft to determine status and compare to schedule and objectives. 3. Prepares and/or reviews data packages prior to submission in accordance with ODA/FAA requirements. 4. Performs data evaluation, interrogation and correlation of data between electronic systems. 5. Identifies abnormal data trends or changes, works with internal and external organizations to facilitate resolution. 6. Interprets engineering configuration data relative to manufacturing planning and deviations. 7. Monitors completion of certification tasks to ensure completion to program requirements and schedules. 8. Participates in team process improvement team projects both internal and external to quality.
Additional Functions: 1. Actively engaged and completes process improvement projects related to achieving improved quality or efficiency within their area of responsibility. 2. Actively supports corporate initiative in resource sustainability and business continuity. 3. Promotes, encourages and supports continuous improvement culture. Perform other duties as assigned.
Other Requirements: 1. An Airframe and Powerplant (A&P) license is not required. but may be used in combination with four (4) years of related quality experience (in addition to the experience requirements below) to offset the Bachelors degree. 2. ASQ certification (CQE) and/or experience as a FAA recognized airworthiness designee highly preferred. 3. Current/prior authorizations as an FAA IAR/DMIR/ODAR or DAR is preferred. 4. A&P license preferred. 5. Understands and is able to apply and communicate to others: blueprints/specifications, Federal Aviation Regulations, Quality Control System Requirements. 6. Computer literate-capable of working within the various software applications utilized throughout the corporation.
Job Location: Savannah, GA
Rate: $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 06/10/2025
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Assurance Certification Specialist II
In a team oriented environment, performs all tasks in area of responsibility in a timely and efficient manner to support aircraft certification activities performed by FAA Principle Inspectors or company ODA IARs. Ensures the article and all associated data supports and presented for certification meets requirements in accordance with the approved Quality Assurance System and the ODA (ODA-511131-CE) Operations Manual.
Education and Experience Requirements:
• Bachelor's Degree in Engineering, aviation sciences, quality systems or related field required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 2 years related technical experience of continually increasing responsibility.
Unique Skills:
• Working knowledge of FAA Part 21 regulations and aircraft certification processes in a Type Certificate program.
• Detail oriented with ability to interigate and compare data for accuracy within systems; data tables, reports, technical documents and other records required to support conformity processes.
• Flexibility to work varied hours or weekends as necessary to support aircraft testing schedule.
• Prepare data reports, resolve data issues by interfacing with multiple organizations.
• Experience and high degree of comfort working with large data sets required.
• Experience with SAP; Solumina; SmarTeam and MS Excel preferred.
• Deomonstrated experience with data validations, data integrity and regulatory reporting desired.
Essential Functions:
• Coordinates article & aircraft certification activities to program schedule and milestones.
• Manipulates and maintains large data sets related to configuration, article traceability and conformity of aircraft to determine status and compare to schedule and objectives.
• Prepares and/or reviews data packages prior to submission in accordance with ODA/FAA requirements.
• Performs data evaluation, interrogation and correlation of data between electronic systems.
• Identifies abnormal data trends or changes, works with internal and external organizations to facilitate resolution.
• Interprets engineering configuration data relative to manufacturing planning and deviations.
• Monitors completion of certification tasks to ensure completion to program requirements and schedules.
• Participates in team process improvement team projects both internal and external to quality.
Additional Functions:
• Actively engaged and completes process improvement projects related to achieving improved quality or efficiency within their area of responsibility.
• Actively supports corporate initiative in resource sustainability and business continuity.
• Promotes, encourages and supports continuous improvement culture.
• Perform other duties as assigned.
Other Requirements:
• An Airframe and Powerplant (A&P) license is not required. but may be used in combination with four (4) years of related quality experience (in addition to the experience requirements below) to offset the Bachelors degree.
• ASQ certification (CQE) and/or experience as a FAA recognized airworthiness designee highly preferred.
• Current/prior authorizations as an FAA IAR/DMIR/ODAR or DAR is preferred.
• A&P license preferred.
• Understands and is able to apply and communicate to others: blueprints/specifications, Federal Aviation Regulations, Quality Control System Requirements.
• Computer literate-capable of working within the various software applications utilized throughout the corporation.
Job Location: Savannah, GA
Rate: $55/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 06/10/2025
Attention: Cameron Town
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Safety and Reliability Engineer
A Safety and Reliability Engineer role located in Kirkland, WA is currently available through Belcan. The Safety and Reliability Engineer will complete Reliability and Maintainability tasks to support product development on schedule, within budget and compliant with ARP4761, MIL-STD-882E and DO326A/356.
Safety and Reliability Engineer duties:
* Apply Reliability and Maintainability (R&M) principals and techniques to support the development
and production of aerospace electronic assemblies following DO-254 and DO-178 processes for
LRUs certified to IDALs of A, B, or C.
* Develop S&R program plans, reliability analyses and predictions: Failure Modes and Effects
Analysis (FMEA); -Failure Modes Effects and Criticality Analysis (FMECA); Mean Time Between
Failures (MTBF) and Bent Pin Analysis. Familiarity with Windchill/Relex and various 217
handbook and EPRD/NPRD methodologies.
* Develop Functional Hazard Analysis (FHA) through System Safety Assessments (SSA), including
Fault Tree Analysis (FTA) and Common Cause Analysis (CCA) with traceability of Basic Events to
the FMEA/FMECA process.
* Familiar with overall ARP-4761 System Safety process for Commercial applications and MIL-STD-
882e System Safety process for Military applications, including the Cyber Security processes
defined in DO-326A/356.
* Possess ability to read and understand schematic diagrams and partition circuitry into functional
blocks
* Complete analyses and safety assessments on schedule and within budget.
* Support the development team in identifying appropriate circuits and interfaces with safety
implications if exposed to fault conditions. Help define the Fault Insertion Test (FIT) strategy and
support testing effort.
* Communicate promptly and effectively with internal and external customers to clarify and
resolve R & M issues.
* Complete R & M tasks to support product development on schedule, within budget and compliant
with ARP4761, MIL-STD-882E and DO326A/356.
* Participate in design reviews and other presentations, including preparation of materials.
EDUCATION AND EXPERIENCE REQUIRED
* BSEE degree
* 5 plus years of experience.
* Familiarity with overall ARP-4761 System Safety process for Commercial applications and MIL-
STD-882e System Safety process for Military applications, including the Cyber Security processes
defined in DO-326A/356.
* Ability to work in a fast paced and team structured environment.
* Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder), or
lawfully admitted into the U.S. as a refugee or granted asylum.
If you are interested in this Safety and Reliability Engineer role located in Kirkland, WA please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.
Job Location: Kirkland, WA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 06/10/2025
Attention: ScottWatkins
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Avionics Software Engineer
A Senior Avionics Software Engineer job in Grand Rapids, MI is currently available at Belcan. This is a full-time direct position with benefits. To be considered, you will need a Bachelor's Degree in Computer Science, Computer Engineering, Electrical Engineering or a similar discipline. In this job, you will support requirements, design, development, coding and testing of Avionics Systems Software. Prior experience developing software for avionics systems is important.
Software Engineer job duties include:
· Develop safety-critical software for avionics systems.
· Complete entire software development life cycle for software applications, including requirements, design, code, and verification
· Use the latest emerging technologies and tools to solve complex engineering problems, working alongside product domain experts and technical professionals
· Support software verification and validation efforts of the embedded electronic systems.
· Write software code in C, Python and other structured programming languages.
· Analyze existing software to develop and evaluate solutions to software problem reports.
Job Qualifications:
· BS degree in Computer Science, Computer Engineering, Electrical Engineering or a similar discipline
· Mid-career and senior engineers who do well in this role are experienced with avionics systems, such as Flight Management Systems, Flight Control Systems, Integrated Modular Avionics systems, and Displays.
· Demonstrated experience making electronics and software work; performing hands-on lab work and in-office design work; and providing technical leadership on teams is important.
· You must be self-motivated, adaptable, and highly organized to thrive on this team, and if you are, you will earn responsibility, ownership, and enjoy job satisfaction.
Desired Skills:
· Knowledge of aircraft systems or other safety critical systems is required.
· Experience integrating software onto hardware platforms using specialized test equipment is required.
· The candidate must be able to work closely with customers and fellow team members to coordinate and plan software lifecycle activities.
· Experience writing software requirements and software design documentation is required.
· Experience developing software using an embedded operating system, such as VxWorks is important.
· Experience with DOORS is required.
· Experience writing low-level software, board support packages, or Assembly software is a plus.
· Demonstrated understanding of electronic hardware interfaces, including hardware errata interpretation is a plus.
If you are interested in this Senior Avionics Software Engineer job in Grand Rapids, MI, please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.
Belcan is an equal opportunity employer. EOE/M/F/D/V
Build a challenging and rewarding career with an industry leader!
http://belcan.com/
Job Location: Grand Rapids, MI
Rate: --
Start Date: --
Input Date: 06/10/2025
Attention: SumitDas
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Avionics Software Engineer
A Senior Avionics Software Engineer job in Grand Rapids, MI is currently available at Belcan. This is a full-time direct position with benefits. To be considered, you will need a Bachelor's Degree in Computer Science, Computer Engineering, Electrical Engineering or a similar discipline. In this job, you will support requirements, design, development, coding and testing of Avionics Systems Software. Prior experience developing software for avionics systems is important.
Software Engineer job duties include:
· Develop safety-critical software for avionics systems.
· Complete entire software development life cycle for software applications, including requirements, design, code, and verification
· Use the latest emerging technologies and tools to solve complex engineering problems, working alongside product domain experts and technical professionals
· Support software verification and validation efforts of the embedded electronic systems.
· Write software code in C, Python and other structured programming languages.
· Analyze existing software to develop and evaluate solutions to software problem reports.
Job Qualifications:
· BS degree in Computer Science, Computer Engineering, Electrical Engineering or a similar discipline
· Mid-career and senior engineers who do well in this role are experienced with avionics systems, such as Flight Management Systems, Flight Control Systems, Integrated Modular Avionics systems, and Displays.
· Demonstrated experience making electronics and software work; performing hands-on lab work and in-office design work; and providing technical leadership on teams is important.
· You must be self-motivated, adaptable, and highly organized to thrive on this team, and if you are, you will earn responsibility, ownership, and enjoy job satisfaction.
Desired Skills:
· Knowledge of aircraft systems or other safety critical systems is required.
· Experience integrating software onto hardware platforms using specialized test equipment is required.
· The candidate must be able to work closely with customers and fellow team members to coordinate and plan software lifecycle activities.
· Experience writing software requirements and software design documentation is required.
· Experience developing software using an embedded operating system, such as VxWorks is important.
· Experience with DOORS is required.
· Experience writing low-level software, board support packages, or Assembly software is a plus.
· Demonstrated understanding of electronic hardware interfaces, including hardware errata interpretation is a plus.
If you are interested in this Senior Avionics Software Engineer job in Grand Rapids, MI, please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.
Belcan is an equal opportunity employer. EOE/M/F/D/V
Build a challenging and rewarding career with an industry leader!
http://belcan.com/
Job Location: Grand Rapids, MI
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 06/10/2025
Attention: SumitDas
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Avionics System Engineer
A Senior Avionics Systems Engineer job in Grand Rapids, MI is currently available at Belcan. This is a full-time direct position with benefits. To be considered, you will need a Bachelor's Degree in Computer Science, Computer Engineering, Electrical Engineering or a similar discipline. In this job, you will support requirements, design, architecture, integration and verification of Avionics Systems. Prior Systems Engineering in support of avionics systems development is important. Successful candidates will have the opportunity for a long-term career where they can gravitate toward work they enjoy with people who care.
Systems Engineer job duties include:
· Develop system requirements and architecture for embedded electronics products.
· Work with engineers and technical representatives to translate product development ideas into structured requirements and other supporting documentation.
· Work with software and hardware designers to verify designs.
· Apply aerospace guidelines and standards independently to ensure safety-critical performance requirements are fulfilled.
· Use the latest emerging technologies and tools to solve complex engineering problems, working alongside product domain experts and technical professionals.
Job Qualifications:
· BS degree in Computer Science, Computer Engineering, Electrical Engineering or a similar discipline
· Prior avionics systems development experience
· DOORS proficiency
· Demonstrated success authoring System requirements for complex, safety-critical embedded systems.
· Mid-career and senior engineers who do well in this role are experienced with avionics systems, such as Flight Management Systems, Flight Control Systems, Integrated Modular Avionics systems, and Displays.
· You must be self-motivated, adaptable, and highly organized to thrive on this team, and if you are, you will earn responsibility, ownership, and enjoy job satisfaction.
·
Desired Skills:
· Extensive knowledge of aircraft systems is important.
· Thorough working knowledge of regulatory guidelines (DO-160, DO-178, ARP4754, DO-254) is important.
· The candidate must be able to work closely with customers and fellow team members to coordinate and plan development activities.
· Experience writing systems requirements and system design documentation is required.
· Experience developing software using an embedded operating system, such as VxWorks is important.
· Proficiency with DOORS is required.
If you are interested in this Senior Avionics Systems Engineer job in Grand Rapids, MI, please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.
Belcan is an equal opportunity employer. EOE/M/F/D/V
Build a challenging and rewarding career with an industry leader!
http://belcan.com/
Job Location: Grand Rapids, MI
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 06/10/2025
Attention: SumitDas
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Manager Propulsion & Fuel Systems
General Summary:
The Senior Manager of Propulsion & Fuel Systems is responsible to lead, and manage the day to day activities of the Propulsion & Fuel Systems Engineering Team to meet Program objectives. This team is responsible for the design integration of the engine, engine control system, and fuel system with the aircraft both mechanically and electronically. This includes managing the engine and fuel systems suppliers, defining and managing mechanical and electrical interfaces, and defining requirements for aircraft cockpit displays and indications to ensure safe and compliant operation, in line with all regulatory requirements and guidance material under both normal and abnormal operating conditions.
The scope of responsibility includes New Product Development and the Sustaining activities of the existing fleet.
Duties and Responsibilities:
1. Communicates effectively in both verbal and written format. Candidate should have strong presentation skills, and able to adjust communication content and approach based on audience.
2. Manages the task execution of the team to ensure on-schedule & to requirements completion.
3. Exercises tested and proven techniques to determine problem root cause and develop corrective action plans and solutions.
4. Coaches, develops, and motivates team members to achieve full potential.
5. Ensures the team works efficiently, and produces work of a high technical standard, that is fully vetted before presenting to company leadership, company DER’s or certification authorities.
6. Has a process improvement mentality, but equally a focus on design improvement and product innovation.
7. Identifies resource problems early, takes corrective action within team, or justifies need for additional resources, or support from other teams, based on quantitative analysis.
8. Interface with engine & fuel system suppliers to manage new design or enhance existing designs to meet aircraft level performance, weight, certification and cost requirements.
9. Support supplier qualification testing, and HACI flight testing as required.
10. Able to manage the certification requirements of major and minor design change projects.
11. Set departmental objectives and conduct evaluations, to ensure team is held accountable for their personal performance.
Education, Work Experience, Certification and/or Licensure:
1. BS in a related Engineering discipline, with 10-15 years directly related experience, including 5 years in a supervisory role.
2. Previous aerospace experience at aircraft OEM and / or engine manufacturer, with experience in a similar role.
3. Some Travel may be required.
Knowledge, Skills and Abilities:
1. Familiar with industry documentation for design, test, and certification of propulsion and fuel systems
2. Familiarization with both Part 33 & Part 23 FAR requirements (Or Part 33 & Part 25)
3. Familiar with Industry standards such including DO-160, DO-178, DO-254, MIL-HDBKs and SAE ARPs, including 4761 & 4754A.
4. Familiar with analytical & design tools and processes.
5. Proven record of leading and managing diverse engineering teams to achieve objectives.
6. Proficient in Microsoft Office Products.
Physical Requirements:
1. Incumbents may be occasionally exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
2. Position involves primarily desk work with a computer.
3. Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
4. Comprehend and adhere to management directions and/or safety instructions with no restrictions.
5. Effectively communicate in Business English language.
6. Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.
LARGE GAPS IN WORK HISTORY WILL DISQUALIFY
Job Location: Greensboro, NC
Rate: DOE
Per Diem: Relocation
Overtime: N/A
Duration: Permanent
Start Date: Asap
Input Date: 06/10/2025
Attention: Garrett Smart
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Technician-Equipment Maintenance
A Senior Technician-Equipment Maintenance role located in Gresham, Oregon is currently available through Belcan. The Senior Technician-Equipment Maintenance role will support maintenance and repair of semiconductor manufacturing equipment. Must practice excellent trouble-shooting methods and be able to work effectively in a team environment.
Senior Technician-Equipment Maintenance Requirements:
* Repair and Maintain LAM, Tel and AMAT Etch systems.
* Repair and Maintain Novellus & Mattson Strip systems.
* Trouble-shoot electronic, electrical and mechanical problems.
* Read and interpret mechanical prints and electrical/electronic schematics.
* Work with systems containing radiation, electrical, mechanical, liquid and gas hazards.
* Practice effective and productive written and verbal communication.
* Document work in maintenance logs effectively.
* Follow procedures and instructions.
* Able to contribute as a reliable and effective team member with minimal supervision.
EDUCATION AND EXPERIENCE REQUIRED:
* AA degree in a technical field,Or equivalent semiconductor industry experience, military training
or technical degree.
* 5-7 years of experience in Etch equipment maintenance.
* Solid organizational, documentation and writing skills.
* Creative problem-solving and decision-making skills.
* Self-directed, self-motivated.
* Proficient with MS Office products.
If you are interested in this Senior Technician-Equipment (Etching Machine) role located in Gresham, Oregon please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.
Job Location: Gresham, OR
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 06/10/2025
Attention: FrancisOsolnick
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Technician-Equipment Maintenance (Diffusion)
A Senior Technician-Equipment (Diffusion/RTP) role located in Gresham, Oregon is currently available through Belcan. The Senior Technician-Equipment (Diffusion/RTP) will support maintenance of semiconductor manufacturing equipment. Must practice excellent trouble-shooting methods and be able to work effectively in a team environment.
Technician-Equipment (Diffusion/RTP) Requirements:
* Repair and Maintain TEL Alpha 8 furnace systems.
* Repair and Maintain AMAT/AG RTP systems.
* Read and interpret mechanical prints and electrical/electronic schematics.
* Work with systems containing radiation, electrical, mechanical, liquid and gas hazards.
* Practice effective and productive written and verbal communication.
* Document work in maintenance logs effectively.
* Follow procedures and instructions.
* Able to contribute as a reliable and effective team member with minimal supervision.
EDUCATION AND EXPERIENCE REQUIRED:
* AA degree in a technical field Or equivalent semiconductor industry experience, military training
or technical degree.
* 5-7 years of experience in Diffusion equipment maintenance.
* Solid organizational, documentation and writing skills.
* Creative problem-solving and decision-making skills.
* Self-directed, self-motivated.
* Proficient with MS Office products.
* Must be a US Person
If you are interested in this Technician-Equipment (Diffusion/RTP) role located in Gresham, Oregon please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.
Job Location: Gresham, OR
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 06/10/2025
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr Electrical Engineer (Contract)
Are you ready to unleash your technical creativity? Dream, Innovate, Inspire and Empower the next generation to transform humanity through technology and imagination!
- Electrical engineers research, design, develop, test, certify, deploy and improve cutting edge products and services. These cover a very wide range from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. You'll conceptualize and design new products and processes throughout the product lifecycle from analog and digital electronic circuit card assemblies to fully integrated systems.
Must-haves:
Bachelor's of Science degree in Electrical Engineering or other related discipline and typically 10 or more years of relevant experience
Demonstrated knowledge of engineering principles and practices
Experience with Computer Aided Engineering tools
Progressive experience working in multi-disciplinary design and development teams
Ability to create wiring diagrams and Harness drawings using Capital Logic / Harness XC
Preferred:
Exposure to simulations through functional and logical models and system analysis
Background in the Aerospace and Defense Industry
Experience composing and analyzing Electrical Load Analysis (ELA), circuit modeling, simulation, and analysis
Familiarity with design requirements related to High Intensity Radiated Field (HIRF) and Indirect Effects of Lightning (IEL)
Knowledge of industry-standard electrical design principles, to include, but not limited to model-based definition, electrical component selection, manufacturing, and production processes
Familiar with Electro Magnetic Effects (EME) to include, Electro Magnetic Compatibility (EMC) and Electro Magnetic Interference (EMI)
Experience in digital or analog circuit design and schematic capture
Understanding of the printed circuit board layout process and tools
IMPORTANT NOTICE:
To conform to U.S. Government international trade regulations, applicant must be a U.S. Citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State or U.S. Department of Commerce.
The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)
Job Location: Louisville CO
Per Diem: --
Overtime: --
Start Date: 2022-01-26
Input Date: 06/10/2025
Attention: Corey Halliday
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr Electrical Engineer (Contract)
Are you ready to unleash your technical creativity? Dream, Innovate, Inspire and Empower the next generation to transform humanity through technology and imagination!
- Electrical engineers research, design, develop, test, certify, deploy and improve cutting edge products and services. These cover a very wide range from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. You'll conceptualize and design new products and processes throughout the product lifecycle from analog and digital electronic circuit card assemblies to fully integrated systems.
Must-haves:
Bachelor's of Science degree in Electrical Engineering or other related discipline and typically 10 or more years of relevant experience
Demonstrated knowledge of engineering principles and practices
Experience with Computer Aided Engineering tools
Progressive experience working in multi-disciplinary design and development teams
Ability to create wiring diagrams and Harness drawings using Capital Logic / Harness XC
Preferred:
Exposure to simulations through functional and logical models and system analysis
Background in the Aerospace and Defense Industry
Experience composing and analyzing Electrical Load Analysis (ELA), circuit modeling, simulation, and analysis
Familiarity with design requirements related to High Intensity Radiated Field (HIRF) and Indirect Effects of Lightning (IEL)
Knowledge of industry-standard electrical design principles, to include, but not limited to model-based definition, electrical component selection, manufacturing, and production processes
Familiar with Electro Magnetic Effects (EME) to include, Electro Magnetic Compatibility (EMC) and Electro Magnetic Interference (EMI)
Experience in digital or analog circuit design and schematic capture
Understanding of the printed circuit board layout process and tools
IMPORTANT NOTICE:
To conform to U.S. Government international trade regulations, applicant must be a U.S. Citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State or U.S. Department of Commerce.
The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)
Job Location: Louisville CO
Per Diem: --
Overtime: --
Start Date: 2022-01-26
Input Date: 06/10/2025
Attention: Corey Halliday
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Electrical Engineer
A Sr. Electrical Engineer job in Louisville, CO is currently available through Belcan. In this role, you will be responsible for researching, designing, developing, testing, certifying, deploying and improving cutting edge products and services. To be considered for this role, you will have a Bachelors degree in Electrical Engineering or other related discipline and typically 10 or more years of relevant experience.
Sr. Electrical Engineer Job duties:
* Research, design, develop, test, certify, deploy and improve cutting edge products and services.
* Conceptualize and design new products and processes throughout the product lifecycle from analog and digital electronic circuit card assemblies to fully integrated systems.
* Create wiring diagrams and Harness drawings using Capital Logic / Harness XC.
Qualifications:
* Experience with Computer Aided Engineering tools.
* Ability to create wiring diagrams and Harness drawings using Capital Logic / Harness XC.
* Exposure to simulations through functional and logical models and system analysis.
* Experience composing and analyzing Electrical Load Analysis (ELA), circuit modeling, simulation, and analysis.
Pay Range: Up to $70/hr DOE
If you are interested in this Sr. Electrical Engineer position in Louisville, CO please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.
Job Location: Louisville, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 06/10/2025
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Electrical Engineer
A Sr. Electrical Engineer job in Louisville, CO is currently available through Belcan. In this role, you will be responsible for researching, designing, developing, testing, certifying, deploying and improving cutting edge products and services. To be considered for this role, you will have a Bachelors degree in Electrical Engineering or other related discipline and typically 10 or more years of relevant experience.
Sr. Electrical Engineer Job duties:
* Research, design, develop, test, certify, deploy and improve cutting edge products and services.
* Conceptualize and design new products and processes throughout the product lifecycle from analog and digital electronic circuit card assemblies to fully integrated systems.
* Create wiring diagrams and Harness drawings using Capital Logic / Harness XC.
Qualifications:
* Experience with Computer Aided Engineering tools.
* Ability to create wiring diagrams and Harness drawings using Capital Logic / Harness XC.
* Exposure to simulations through functional and logical models and system analysis.
* Experience composing and analyzing Electrical Load Analysis (ELA), circuit modeling, simulation, and analysis.
Pay Range: Up to $70/hr DOE
If you are interested in this Sr. Electrical Engineer position in Louisville, CO please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services - from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.
Job Location: Louisville, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 06/10/2025
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Technician-Equipment Maintenance
A Sr. Technician-Equipment Maintenance (Implant) role located in Gresham, OR is currently available through Belcan. The Sr. Technician-Equipment Maintenance (Implant) will support Fab 4 maintenance of semiconductor manufacturing equipment. Must practice excellent trouble-shooting methods and be able to work effectively in a team environment
Sr. Technician-Equipment Maintenance (Implant) job duties:
* Maintain and repair Implant semiconductor systems.
* Effectively troubleshoot electronic, electrical and mechanical problems.
* Work with systems that contain radiation, electrical, mechanical, liquid, and gas hazards.
* Perform preventative maintenance according to schedule and specifications.
* Read and interpret mechanical prints and electrical/electronic schematics.
* Use schematics, tools, and common test equipment for calibration, diagnosis, and repair of
equipment.
* Disassemble, adjust and repair equipment according to maintenance specifications and OEM
manuals.
* Effective documentation of work in maintenance logs.
* Communicate detailed information clearly and effectively.
EDUCATION AND EXPERIENCE REQUIRED
* AA degree in Electrical Engineering, Mechanical Engineering or pertinent technical discipline (or
planned completion in current academic calendar)
* Or equivalent military training, or technical degree.
* 5-7 years of experience in Ion Implant equipment maintenance.
* Tool types: Varian VIISion 80, E220/500, VIISta HC, VIISta 810 and Axcelis GSD200 / GSD-HE
* Electronic and mechanical aptitude. Natural affinity for electronic and mechanical tinkering.
* A strong desire for personal continuous improvement and learning.
* Effective written and verbal communication skills.
* Basic IT and software skills (MS Office).
* Solid organizational, documentation and writing skills.
* Ability to contribute as an efficient and reliable team member with minimal supervision.
If you are interested in this Sr. Technician-Equipment Maintenance (Implant) role located in Gresham, OR please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for over 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.
Job Location: Gresham, OR
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 06/10/2025
Attention: ScottWatkins
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer 4
The candidate for this position will guide product design to incorporate new technology and verify structural integrity of various crewed and uncrewed aerial vehicles across commercial and military aircraft, rotorcraft, and spacecraft. Will employ efficient integration of both composite and metallic constructions. Solve complex structural problems by using analytical methods, finite element models/simulations and other analysis tools throughout the development lifecycle.
Requirements:
- BS in Aerospace / Mechanical Engineering or related discipline
- Minimum of 9 years’ experience in the stress analysis field, preferably aerospace or an equivalent combination of technical education and experience – PhD+4 years’ related work experience, MS+7 years’ related work experience
- Must be a US Citizen or Legal US Permanent Resident
- Strong English written, verbal, and electronic communication skills
- Proficiency with Microsoft Office 365 and Windows 10
- Strong experience in classical hand analysis for strength and stability of metallic and composite components
- Working knowledge of MIL-HDBK-516, or FAR Part 23, 25, 27 certification requirements
- Demonstrate proficiency in FEM idealization and good modeling practices using Femap, Nastran, ANSYS, Abacus or other FEA packages
- Experience with a 3D CAD package CATIA V5, Solidworks, Creo, NX/Unigraphics, Fusion 360, etc
- Ability to explain and present analysis and assumptions in a rational manner to customers, leadership, and teammates
- Work at our Manassas VA
Specific Responsibilities:
- Define and document process, certification, and test results to substantiate for customers and regulatory agencies that requirements are satisfied.
- Develop analytical processes/tools to improve effectiveness, quality and efficiency of the development effort.
- Work as an individual contributor under minimal direction.
- Write technical reports that are accurate, clear, and comprehensive with minimal review. Provide review and feedback to other analysts
- Lead small teams (3+) and give technical guidance during any stage/level of a program development
- Be proactive in teaching others, sharing experiences, and learning new skills
- Maintain good communication with customers, leadership, or teammates when onsite or remote
- Think ahead and ask questions. Making mistakes is acceptable if we understand and learn from them. Focus on fixing problems when they arise and not placing blame
Desired Skills:
- Experience with prototype development and testing of airframe primary structure
- Automate workflows for speed and efficiency using Microsoft Office 365, VBA, Python, Matlab, or Boeing custom tools
- Experience with fatigue and damage tolerance analysis, categorization of part criticality
- Experience in writing certification reports for Military or FAR Part 23/25/27
- Experience working with FAA or Military DERs
- Resource planning and task estimation for a complex effort supporting bid & proposal
- Able to support the resolution of complex aircraft structural challenges by applying various learned aerospace industry standard classical analysis techniques for both metallic and composite structures
- Cross-disciplinary interests are strongly desired; we love people that combine world-class expertise with a diverse background, hands on experience, and interesting hobbies
The Structures Company LLC is an AA/EOE.
Job Location: Manassas, VA
Rate: $75-$82/Hr. **DOE**
Per Diem: Yes
Duration: 6 Months
Start Date: 10/1/2021
Input Date: 06/10/2025
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
System Integration Inspector Sr
Sr. Systems Integration Inspector
Perform all required inspections operations on mechanical, electrical and electronic parts, assemblies, tooling and software during receiving, fabrication, assembly, modification, rework, repair, installation, test and shipping in a team environment. Participate in or conduct First Article inspections of mechanical, electrical or electronic equipment for completeness and conformance with applicable drawings and specifications. Coordinate with engineering, customers, vendors, production workers and other Quality Assurance people as required to complete given tasks. Provide technical assistance while solving problems and recommend corrective action to be taken to prevent recurrence of rejections. Shift assigned will be based on bargaining unit agreements.
• Use and interpret DoD, NASA and Boeing blueprints, specifications, directives, documents, manuals, inspection plans and other similar information pertaining to Quality Assurance.
• Set up and operate measuring instruments and equipment necessary to accomplish work assignments.
• Follow inspection and statistical sampling procedures to accept or reject materials and adjust inspection levels.
• Interpret statistical process control charts and coordinate corrective actions and adjustments with quality engineering.
• Move materials from place to place within the work area. This material can include not only parts, sub-assemblies and assemblies, but also tools, jigs, equipment, documentation, and other supplies as necessary for inspection and or assembly/test of products. This may include the packaging or unpackaging of raw material and/or finished products.
• Setup equipment and perform tests on various products and assemblies using manual, semi-automatic, or automated test devices.
• Witness, evaluate, certify and record certification testing data and maintain personal certifications as work requires.
• Inspect incoming and outgoing shipments for proper identification, quantity, damage, packaging, paperwork, shipping instructions, and perform appropriate dimensional, composition, non-destructive, destructive and inspection.
• Review recurring discrepancies to ascertain cause and corrections required.
• Review completed inspection records to assure compliance with pertinent written directives and other program direction.
• Conduct internal reviews to assure compliance with the Quality Manual and other procedures such as Quality Instructions, Sampling Plans and Operating Procedures.
• Prepare and edit reports for approval by supervision.
• Assist Manufacturing QA Manager in continuous process improvement efforts.
• Maintain work area in a clean and orderly condition.
• Maintain licenses, permits and certifications required to perform assigned work.
• Perform other duties as assigned within general job classification.
Basic Qualifications
• Minimum 3 years of experience working with circuit card and/or electronics manufacturing
• Experience working to J-STD with Space Addendum
• High School Diploma or GED
Preferred Qualifications:
• More than 3 years of experience performing dimensional, composition, non-destructive, destructive and/or inspections.
• Experience with gathering data and performing a Root Cause Corrective Action (RCCA).
Job Location: AL
Rate: 23 HR
Input Date: 06/10/2025
Attention: Diego villegas
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer
A Systems Engineer job in Bellevue, WA is currently available at Belcan. This job can be worked remotely from anywhere in the U.S. This is a direct, full-time position with benefits. To be considered for this role, you will need a Bachelor of Science degree in the engineering field, and a minimum of 7 years of experience within the aerospace and defense industry, preference for systems / hardware experience in the defense and space market or other highly regulated industry experience.
Experience in avionics related hardware and software in one or more of the following platforms is preferred: Spacecraft (Launch Vehicle), Satellites, and/or Engine Control systems.
This engineer should be able to work both functional and environmental electronic hardware requirements. Given the nature of the role, experience with embedded software systems engineering is a highly desired.
Job duties:
Candidates will be involved in leading, executing and / or oversight for various systems engineering tasks including:
* Develop Avionics component specifications (controller hardware and software) from Engine Control System Design data / artifacts
* Develop and validate hardware requirements data / artifacts.
* Avionics system requirements definition and management - specifically the decomposition of systems requirements into hardware related high level requirements (HLR) / low level requirements (LLR), including environmental related requirements
* Perform requirements decomposition (functional analysis and allocation), definition, and traceability for functional and environmental requirements
* Experience in avionics embedded software or equivalent is highly desired
* Architecture design capture -- defines the structure, behavior, and more views of the system that align with the Concept of Operations (CONOPS)
* Develop and manage interface and control data / documentation (ICD) for systems and associated sub-systems
* Work across functional teams to investigate and solve problems, including trade studies and optimization activities
* Perform verification related activities in a process-oriented environment consistent with industry regulatory approval standards (Mil Standards, ARP-4754, DO-178C, SYSML). Specifically, perform verification strategy, planning, method definition, procedure development, compliance and testing
* Help raise the level of performance of the team through a collaborative team setting, consistent communication, and willingness to help others achieve success
Qualifications:
* Bachelor of Science degree in systems engineering, aerospace engineering, electrical engineering, equivalent engineering degree from an accredited institution or relevant equivalent experience.
* 5+ years systems or electrical engineering or similar relevant experience in avionics related hardware platforms
* Hands on experience in avionics life cycle development to DO-178C DAL C or higher (or similar)
* Demonstrated experience in system development where rigorous process and regulatory standards are required, including standards such as ARP-4754, DO-178B/C, DO-160 and Mil Standards
* Atlassian tools experience (JIRA, Confluence, Git)
* DOORs / DOORS NextGen tools experience
* Matlab / Simulink experience is desired
* Proficiency in systems tools, simulation testing environments, scripting, programming and analysis (such as C++/C, Python, Java, Javascript, MagicDraw, Rhapsody, CAMEO etc…)
* Ability to deal with ambiguity, investigate and solve problems, work across multi-discipline teams, and to recommend solutions to complex system level problems
* Legal authorization to work in the U.S. is required
Job Location: Bellevue, WA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 06/10/2025
Attention: SusheelNorbert
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer
A Systems Engineer job in Windsor, CT is currently available at Belcan. This job can be worked remotely from anywhere in the U.S. This is a direct, full-time position with benefits. To be considered for this role, you will need a Bachelor of Science degree in the engineering field, and a minimum of 7 years of experience within the aerospace and defense industry, preference for systems / hardware experience in the defense and space market or other highly regulated industry experience.
Experience in avionics related hardware and software in one or more of the following platforms is preferred: Spacecraft (Launch Vehicle), Satellites, and/or Engine Control systems.
This engineer should be able to work both functional and environmental electronic hardware requirements. Given the nature of the role, experience with embedded software systems engineering is a highly desired.
Job duties:
Candidates will be involved in leading, executing and / or oversight for various systems engineering tasks including:
* Develop Avionics component specifications (controller hardware and software) from Engine Control System Design data / artifacts
* Develop and validate hardware requirements data / artifacts.
* Avionics system requirements definition and management - specifically the decomposition of systems requirements into hardware related high level requirements (HLR) / low level requirements (LLR), including environmental related requirements
* Perform requirements decomposition (functional analysis and allocation), definition, and traceability for functional and environmental requirements
* Experience in avionics embedded software or equivalent is highly desired
* Architecture design capture -- defines the structure, behavior, and more views of the system that align with the Concept of Operations (CONOPS)
* Develop and manage interface and control data / documentation (ICD) for systems and associated sub-systems
* Work across functional teams to investigate and solve problems, including trade studies and optimization activities
* Perform verification related activities in a process-oriented environment consistent with industry regulatory approval standards (Mil Standards, ARP-4754, DO-178C, SYSML). Specifically, perform verification strategy, planning, method definition, procedure development, compliance and testing
* Help raise the level of performance of the team through a collaborative team setting, consistent communication, and willingness to help others achieve success
Qualifications:
* Bachelor of Science degree in systems engineering, aerospace engineering, electrical engineering, equivalent engineering degree from an accredited institution or relevant equivalent experience.
* 5+ years systems or electrical engineering or similar relevant experience in avionics related hardware platforms
* Hands on experience in avionics life cycle development to DO-178C DAL C or higher (or similar)
* Demonstrated experience in system development where rigorous process and regulatory standards are required, including standards such as ARP-4754, DO-178B/C, DO-160 and Mil Standards
* Atlassian tools experience (JIRA, Confluence, Git)
* DOORs / DOORS NextGen tools experience
* Matlab / Simulink experience is desired
* Proficiency in systems tools, simulation testing environments, scripting, programming and analysis (such as C++/C, Python, Java, Javascript, MagicDraw, Rhapsody, CAMEO etc…)
* Ability to deal with ambiguity, investigate and solve problems, work across multi-discipline teams, and to recommend solutions to complex system level problems
* Legal authorization to work in the U.S. is required
Job Location: Windsor, CT
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 06/10/2025
Attention: SusheelNorbert
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer
A Systems Engineer job in Indianapolis, IN is currently available at Belcan. This job can be worked remotely from anywhere in the U.S. This is a direct, full-time position with benefits. To be considered for this role, you will need a Bachelor of Science degree in the engineering field, and a minimum of 7 years of experience within the aerospace and defense industry, preference for systems / hardware experience in the defense and space market or other highly regulated industry experience.
Experience in avionics related hardware and software in one or more of the following platforms is preferred: Spacecraft (Launch Vehicle), Satellites, and/or Engine Control systems.
This engineer should be able to work both functional and environmental electronic hardware requirements. Given the nature of the role, experience with embedded software systems engineering is a highly desired.
Job duties:
Candidates will be involved in leading, executing and / or oversight for various systems engineering tasks including:
* Develop Avionics component specifications (controller hardware and software) from Engine Control System Design data / artifacts
* Develop and validate hardware requirements data / artifacts.
* Avionics system requirements definition and management - specifically the decomposition of systems requirements into hardware related high level requirements (HLR) / low level requirements (LLR), including environmental related requirements
* Perform requirements decomposition (functional analysis and allocation), definition, and traceability for functional and environmental requirements
* Experience in avionics embedded software or equivalent is highly desired
* Architecture design capture -- defines the structure, behavior, and more views of the system that align with the Concept of Operations (CONOPS)
* Develop and manage interface and control data / documentation (ICD) for systems and associated sub-systems
* Work across functional teams to investigate and solve problems, including trade studies and optimization activities
* Perform verification related activities in a process-oriented environment consistent with industry regulatory approval standards (Mil Standards, ARP-4754, DO-178C, SYSML). Specifically, perform verification strategy, planning, method definition, procedure development, compliance and testing
* Help raise the level of performance of the team through a collaborative team setting, consistent communication, and willingness to help others achieve success
Qualifications:
* Bachelor of Science degree in systems engineering, aerospace engineering, electrical engineering, equivalent engineering degree from an accredited institution or relevant equivalent experience.
* 5+ years systems or electrical engineering or similar relevant experience in avionics related hardware platforms
* Hands on experience in avionics life cycle development to DO-178C DAL C or higher (or similar)
* Demonstrated experience in system development where rigorous process and regulatory standards are required, including standards such as ARP-4754, DO-178B/C, DO-160 and Mil Standards
* Atlassian tools experience (JIRA, Confluence, Git)
* DOORs / DOORS NextGen tools experience
* Matlab / Simulink experience is desired
* Proficiency in systems tools, simulation testing environments, scripting, programming and analysis (such as C++/C, Python, Java, Javascript, MagicDraw, Rhapsody, CAMEO etc…)
* Ability to deal with ambiguity, investigate and solve problems, work across multi-discipline teams, and to recommend solutions to complex system level problems
* Legal authorization to work in the U.S. is required
Job Location: Indianapolis, IN
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 06/10/2025
Attention: SusheelNorbert
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer ( Dulles, VA ) 4112-1
Systems Engineer ( Dulles, VA ) 4112-1
9 Month Contract
Pay Rate: $55-65/hr W2 Maybe more for the right candidate.
Job Description:
In this role, the Systems Engineer will perform analysis, design, or test of one or more moderately complex (or portions of complex) mechanical/structural components, subsystems, and/or functional systems. The candidate will analyze requirements for mechanical/structural component, subsystem, and/or functional systems. The candidate should be able to select applicable analytical data from previous systems, determine the technical principles involved, mathematically define the problem and compute the engineering characteristics consistent with the specifications, design needs and requirements of other portions of the system, and follow up by releasing the results as design data (once reviewed by a higher graded engineer). The engineer will develop original ideas, elaborate on preliminary design concepts, evaluate completed designs with their program/functional supervisors and other technical groups, and make the necessary design modifications to achieve the best design within the program constraints. The candidate may also develop and coordinate the conduct of test programs required to evaluate design work.
Desired experience includes Requirements Management Tools such as DOORS, Cradle, or CORE, and various analysis engineering tools, such as MATLAB, MATHCAD, and STK. Actual spacecraft operations and related ground systems expertise is always a plus. Additional experience in any of the following areas is also desired: orbital mechanics, power systems modeling, avionics or digital electronics design, telecommunications design, risk analysis, thermal design and analysis, or integration and testing (either at the spacecraft or payload level).
Duties:
- Provide support to selected elements of the program Systems Engineering Team
- Support and deliver SE Products and other deliverables, with a focus on mission success
- Troubleshoot and develop solutions to challenging Engineering problems
- Contribute to the technical management of program elements
- Provide systems engineering support for technical reviews
- Write status and technical performance reviews, analyses and reports
Qualifications:
REQUIRED QUALIFICATIONS:
- Bachelor’s degree or higher in an Engineering or related field
- three to Seven years of related experience
- Thorough understanding of the Systems Engineering process
- Strong oral and written communication skills
- Aptitude for understanding system and subsystem interactions
- Experience defining requirements and interfaces
PREFERRED QUALIFICATIONS:
- Understanding of spacecraft integration & test, launch, and mission operations
- Experience with human spaceflight vehicle development including integration & test
- Experience developing verification documentation
- Experience with architecture development
- Master’s degree in a technical discipline (with five years of professional experience)
Job Location: Dulles, VA
Rate: 60
Per Diem: Yes
Overtime: yes
Duration: 9 Month
Start Date: ASAP
Input Date: 06/10/2025
Attention: Tim Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer 4 - Everett, WA
Systems Engineer 4
Location: Everett, WA
Duration: 6+ months with possible extension
Note: Need experience with System Requirements, Certification, Qualification and Testing
Description:
Leads work with customers to develop and document complex electronic and electrical system requirements. Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications. Leads work to test and validate to ensure system designs meet operational and functional requirements. Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches technology advances for potential application to company business needs. Makes recommendations for technology investments.
Education / Experience:
Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry .
Skill Code: 664-Electronic Sys Design & Analy
Rate: $80
Per Diem: Split
Overtime: Possible
Duration: 6 months
Start Date: ASAP
Input Date: 06/10/2025
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer 4 - HOT HOT HOT!
Very exciting opportunity to work with one of the world's largest aerospace companies!
The contracts are regularly extended and direct opportunities are often available.
Description:
Systems Architecture and Definition Engineer
Applies an interdisciplinary, collaborative approach to plan, design, develop and verify complex lifecycle balanced system of systems and system solutions. Evaluates customer/operational needs to define and coordinate system performance requirements, integrate technical parameters and assure compatibility of all physical, functional and program interfaces. Performs various analyses to optimize total system of systems and/or system architecture. Performs analyses for affordability, safety, reliability, maintainability, testability, human systems integration, survivability, vulnerability, susceptibility, system security, regulatory, certification, product assurance and other specialties quality factors into a preferred configuration to ensure mission success. Develops, maintains and identifies improvements for the planning, organization, implementation and monitoring of requirements management processes, tools, risk, issues, opportunity management and technology readiness assessment processes. Resolves cross-functional technical issues.
Systems Engineering, System Integration, Design Integration Responsibilities May Include:
Apply interdisciplinary, collaborative approaches to plan, design, develop and verify system solutions.
Define and coordinate system performance requirements and integrate technical parameters.
Develop and document electronic and electrical system requirements
Perform analysis to optimize total system and/or system architecture to solve complex missile defense problems.
Define high level functional and performance requirements and verification methods, subsequent analysis, decomposition, and derivation of requirements, allocation of those lower-level requirements to physical and functional architectural elements, and tracking them through design, verification, integration, and operational validation
Develop verification and validation methods, processes, logic, and plans in support of program milestones.
Analyze and translate requirements into system architecture, hardware and software designs and interface specifications
Perform analyses for affordability, safety, reliability, maintainability, testability, survivability, human systems integration, survivability, vulnerability, susceptibility, system security, regulatory, certification, product assurance, product security (cyber security) and other specialties quality factors into a preferred configuration to ensure mission success.
Utilization of Model-Based Systems Engineering (MBSE) tools such as DOORS, Cameo, and mathematical modeling and simulation to develop system definitions and perform trade studies in assigned areas
Systems and Performance Analysis, Model & Sim, Algorithm Development Responsibilities May Include:
Evaluate systems under various scenarios and architectures to determine and/or optimize overall system mission performance in a framework giving insight into performance
Perform analysis to optimize total system of systems and/or system architecture to solve complex missile defense problems.
Develop and maintain analysis tools of varied fidelity including modeling and simulation tools to predict performance against evolving threats of current and future missile defense systems
Perform systems analyses of the existing system architecture in conjunction with new technologies and concepts for improvements to be considered for future architectures
Develop, refine and document key algorithm capabilities to support various DoD customers
Conducts analysis of multiple targets discrimination for survivability, vulnerability, and susceptibility into a preferred configuration to ensure mission success
Model Based Engineering / Systems Engineering
Development of Model-Based Systems Engineering (MBSE) tools, processes and architectures
Configuration, data and work flow management of program specific MBSE tools and processes
Establishment of protocol / process for integration of engineering tools with MBSE
Examples of current open positions / typical work scope:
Model Based Engineering Team:
of Model-Based Systems Engineering (MBSE) tools, processes and architectures for missile and weapons systems. Responsible for tailoring and deploying MBE/MBSE techniques to MWS Programs.
Preferred Qualifications (Desired Skills/Experience):
Experience applying systems engineering processes and principles
Experience/domain knowledge of system architecture, requirements, interface definition, verification, and validation
Experience with complex systems development and integration
Experience modeling or simulating complex systems
Experience with implementation and maintenance of systems engineering tools, schedules and metrics (i.e. Earned value management, DOORs, CAMEO)
Experience with Model Based Systems Engineering
Understanding of statistical analysis, distributions, and sampling
Applies an interdisciplinary, collaborative approach to plan, design, develop and verify complex lifecycle balanced system of systems and system solutions. Evaluates customer/operational needs to define and coordinate system performance requirements, integrate technical parameters and assure compatibility of all physical, functional and program interfaces. Performs various analyses to optimize total system of systems and/or system architecture. Performs analyses for affordability, safety, reliability, maintainability, testability, human systems integration, survivability, vulnerability, susceptibility, system security, regulatory, certification, product assurance and other specialties quality factors into a preferred configuration to ensure mission success. Develops, maintains and identifies improvements for the planning, organization, implementation and monitoring of requirements management processes, tools, risk, issues, opportunity management and technology readiness assessment processes. Resolves cross-functional technical issues.
Systems Engineering, System Integration, Design Integration Responsibilities May Include:
Apply interdisciplinary, collaborative approaches to plan, design, develop and verify system solutions.
Define and coordinate system performance requirements and integrate technical parameters.
Develop and document electronic and electrical system requirements
Perform analysis to optimize total system and/or system architecture to solve complex missile defense problems.
Define high level functional and performance requirements and verification methods, subsequent analysis, decomposition, and derivation of requirements, allocation of those lower-level requirements to physical and functional architectural elements, and tracking them through design, verification, integration, and operational validation
Develop verification and validation methods, processes, logic, and plans in support of program milestones.
Analyze and translate requirements into system architecture, hardware and software designs and interface specifications
Perform analyses for affordability, safety, reliability, maintainability, testability, survivability, human systems integration, survivability, vulnerability, susceptibility, system security, regulatory, certification, product assurance, product security (cyber security) and other specialties quality factors into a preferred configuration to ensure mission success.
Utilization of Model-Based Systems Engineering (MBSE) tools such as DOORS, Cameo, and mathematical modeling and simulation to develop system definitions and perform trade studies in assigned areas
Systems and Performance Analysis, Model & Sim, Algorithm Development Responsibilities May Include:
Evaluate systems under various scenarios and architectures to determine and/or optimize overall system mission performance in a framework giving insight into performance
Perform analysis to optimize total system of systems and/or system architecture to solve complex missile defense problems.
Develop and maintain analysis tools of varied fidelity including modeling and simulation tools to predict performance against evolving threats of current and future missile defense systems
Perform systems analyses of the existing system architecture in conjunction with new technologies and concepts for improvements to be considered for future architectures
Develop, refine and document key algorithm capabilities to support various DoD customers
Conducts analysis of multiple targets discrimination for survivability, vulnerability, and susceptibility into a preferred configuration to ensure mission success
Model Based Engineering / Systems Engineering
Development of Model-Based Systems Engineering (MBSE) tools, processes and architectures
Configuration, data and work flow management of program specific MBSE tools and processes
Establishment of protocol / process for integration of engineering tools with MBSE
Examples of current open positions / typical work scope:
Model Based Engineering Team:
of Model-Based Systems Engineering (MBSE) tools, processes and architectures for missile and weapons systems. Responsible for tailoring and deploying MBE/MBSE techniques to MWS Programs.
Preferred Qualifications (Desired Skills/Experience):
Experience applying systems engineering processes and principles
Experience/domain knowledge of system architecture, requirements, interface definition, verification, and validation
Experience with complex systems development and integration
Experience modeling or simulating complex systems
Experience with implementation and maintenance of systems engineering tools, schedules and metrics (i.e. Earned value management, DOORs, CAMEO)
Experience with Model Based Systems Engineering
Understanding of statistical analysis, distributions, and sampling
6 months possible extension
This position requires that you work on-site in OKC, candidate must be local
This position requires that you work on-site in OKC, candidate must be local
The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.
We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.
We have a national medical, dental and vision plan with United Healthcare and we also have a robust 401K offering. In some cases there is bonus potential, sick pay and holiday pay for those who qualify.
The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)
The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)
Job Location: Oklahoma City OK
Per Diem: --
Overtime: --
Start Date: 2022-01-14
Input Date: 06/10/2025
Attention: Kimra Stone
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer 4 - Integration and Validation HIRING FAST!!!
Very exciting opportunity to work with one of the world's largest aerospace companies!
The contracts are regularly extended and direct opportunities are often available.
Description:
Systems Integration and Validation Engr
Applies an interdisciplinary, collaborative approach to plan, design, develop and verify complex lifecycle balanced system of systems and system solutions. Evaluates customer/operational needs to define and coordinate system performance requirements, integrate technical parameters and assure compatibility of all physical, functional and program interfaces. Performs various analyses to optimize total system of systems and/or system architecture. Performs analyses for affordability, safety, reliability, maintainability, testability, human systems integration, survivability, vulnerability, susceptibility, system security, regulatory, certification, product assurance and other specialties quality factors into a preferred configuration to ensure mission success. Develops, maintains and identifies improvements for the planning, organization, implementation and monitoring of requirements management processes, tools, risk, issues, opportunity management and technology readiness assessment processes. Resolves cross-functional technical issues.
Job Description Qualifications:
The B-52/ASC2/ETSS programs are seeking experienced Systems Engineers to join our Systems Integration Laboratory team in Oklahoma City. In this role, the successful candidate with be providing support for development of the RMP/CERP/AWACS/AEWC/ETSS SILs as well as provide oversight in the areas of Electronic Warfare integration and overall Labs RIO management. The SILs laboratories to be used for software development, integration and testing.
POSITION RESPONSIBILITIES
Duties will include but not limited to:
Applies an interdisciplinary, collaborative approach to plan, design, develop and verify system and subsystem requirements.
Develops system test plans and creates requirement verification links to test procedures in DOORS.
Works with multi-disciplinary team to track progress of system development and availability to support test activities.
Researches, analyzes, and compiles technical data for company products and system-level concepts in the projected operational environments to optimize effectiveness over the program lifecycle.
Applies systems engineering processes, methodologies and tools to the design of system of systems, systems and new product development.
Assists with the development of system requirements, functional requirements, and allocation of the same to individual hardware, software, facility, and personnel components
Coordinates the resolution of action items from Configuration Control Board (CCB) meetings, design reviews, program reviews, and test reviews that require cross-discipline coordination
Resolves cross-functional technical issues
Develops the planning, organization, implementation and monitoring of requirements management processes, tools, risk, issues, opportunity management and technology readiness assessment processes.
Basic Qualifications (Required Skills/Experience):
* Bachelor's degree in engineering or related discipline and 5 or more years' experience.
* 2+ years' experience with Systems Engineering principles
* This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship.
Preferred Qualifications (Desired Skills/Experience):
* Experience with Radar systems development and test
* Experience with electronic warfare integration
* Experience with BORIS
Applies an interdisciplinary, collaborative approach to plan, design, develop and verify complex lifecycle balanced system of systems and system solutions. Evaluates customer/operational needs to define and coordinate system performance requirements, integrate technical parameters and assure compatibility of all physical, functional and program interfaces. Performs various analyses to optimize total system of systems and/or system architecture. Performs analyses for affordability, safety, reliability, maintainability, testability, human systems integration, survivability, vulnerability, susceptibility, system security, regulatory, certification, product assurance and other specialties quality factors into a preferred configuration to ensure mission success. Develops, maintains and identifies improvements for the planning, organization, implementation and monitoring of requirements management processes, tools, risk, issues, opportunity management and technology readiness assessment processes. Resolves cross-functional technical issues.
Job Description Qualifications:
The B-52/ASC2/ETSS programs are seeking experienced Systems Engineers to join our Systems Integration Laboratory team in Oklahoma City. In this role, the successful candidate with be providing support for development of the RMP/CERP/AWACS/AEWC/ETSS SILs as well as provide oversight in the areas of Electronic Warfare integration and overall Labs RIO management. The SILs laboratories to be used for software development, integration and testing.
POSITION RESPONSIBILITIES
Duties will include but not limited to:
Applies an interdisciplinary, collaborative approach to plan, design, develop and verify system and subsystem requirements.
Develops system test plans and creates requirement verification links to test procedures in DOORS.
Works with multi-disciplinary team to track progress of system development and availability to support test activities.
Researches, analyzes, and compiles technical data for company products and system-level concepts in the projected operational environments to optimize effectiveness over the program lifecycle.
Applies systems engineering processes, methodologies and tools to the design of system of systems, systems and new product development.
Assists with the development of system requirements, functional requirements, and allocation of the same to individual hardware, software, facility, and personnel components
Coordinates the resolution of action items from Configuration Control Board (CCB) meetings, design reviews, program reviews, and test reviews that require cross-discipline coordination
Resolves cross-functional technical issues
Develops the planning, organization, implementation and monitoring of requirements management processes, tools, risk, issues, opportunity management and technology readiness assessment processes.
Basic Qualifications (Required Skills/Experience):
* Bachelor's degree in engineering or related discipline and 5 or more years' experience.
* 2+ years' experience with Systems Engineering principles
* This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship.
Preferred Qualifications (Desired Skills/Experience):
* Experience with Radar systems development and test
* Experience with electronic warfare integration
* Experience with BORIS
6 months possible extension
This position requires that you work on-site in OKC, candidate must be local
This position requires that you work on-site in OKC, candidate must be local
The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.
We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.
We have a national medical, dental and vision plan with United Healthcare and we also have a robust 401K offering. In some cases there is bonus potential, sick pay and holiday pay for those who qualify.
The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)
The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)
Job Location: Oklahoma City OK
Per Diem: --
Overtime: --
Start Date: 2022-01-10
Input Date: 06/10/2025
Attention: Kimra Stone
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Recruiter - Manufacturing
If you are looking for a challenging opportunity that will ignite your passion for designing cool and innovative products, are exceptionally creative, are a great problem solver and can make things happen - apply today!
Main Purpose:
As the Technical Recruiter, you will be responsible for engaging in direct and indirect recruiting strategies to increase company exposure, branding, and reputation. In addition, we need you to conduct deep internet mining for passive candidates and make sound judgments on talent and exercise discretion in making independent decisions. As our Technical Recruiter you will be responsible for sourcing, identifying, qualifying, interviewing, and presenting candidates to hiring managers. You will also be responsible for recruiting at all levels of talent spanning multiple skills, with strong focus on professional and exempt level positions. You will work independently on multiple projects with a strong ability to effectively prioritize and produce results within set timelines.
Work with hiring managers to accurately define position duties and requirements, developing clear job descriptions and effective job postings. Identify likely ways to effectively source candidates for difficult to fill positions.
Aggressively recruit well-qualified applicants from a variety of sources including cold calling, sourcing from various Job Boards, User Groups, networking, electronic advertising and occasional career fairs. Assist hiring managers to identify and implement effective pre-screening techniques for each position. As appropriate, coordinate phone interviews, testing, practical assessments, on-site interviews and any required travel.
Conduct in-depth telephone assessments of candidates using comprehensive behavioural interviewing and work history reviews
Lead interviewer debrief sessions and provide recommendations on hiring.
Sell the company's value proposition to candidates and successfully negotiate offers and relocation packages.
Support relocation, on-boarding and post-hire follow-up for new hires, including developing effective resources and materials.
Identify, initiate and/or participate in various efforts to continuously improve the staffing life cycle.
Participate in recruitment strategy sessions to discuss best practices in sourcing, recruiting tools, market trends and improve workflow efficiency.
Generate recruitment activity reports and drive regular status meetings with hiring teams.
A minimum of 2 years of heavy recruiting experience, ideally in aerospace, a start-up organization or a highly unique cultural environment.
Possess an established track record of developing strong relationships with potential employees.
Able to accurately vet technical resumes and conduct in depth technical interviews.
Experience at providing consultative recommendations and influencing hiring teams.
Fearless networker and cold caller with an understanding of how to build and track candidates.
Excellent verbal and written communication skills, and effective communication in formal and informal settings with senior executives, peers and candidates.
Excellent negotiator with a confidence-inspiring manner, and a keen sense of determination and urgency. Have a strong customer focus when dealing with both hiring managers and candidates.
The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)
Job Location: Remote
Per Diem: --
Overtime: --
Start Date: 2022-02-25
Input Date: 06/10/2025
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Engineer II (Contract)
Do you have an eye for detail and enjoy working with amazing products and tools? Join us in championing and protecting explorers and heroes!
- As a Test Engineer, you will be using your skills and expertise to simulate, test, certify and improve cutting edge products and services. These cover a very wide range from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. You'll develop complex test plans and procedures for a variety of systems to ensure the verification and validation of all product requirements. You will also be involved with the execution of the tests using top industry tools. As a cross functional engineer, you'll test system and component level new products and develop new test processes throughout the product lifecycle.
Must-haves:
Bachelor's of Science degree in Engineering or other related discipline and typically 3 or more years of experience
Conceptual knowledge of engineering principles and practices
Familiarity working in multi-disciplinary design and development teams
Knowledge of requirements management, system design, and systems integration
Exposure to planning, conducting and documenting Verification and Validation (V&V) activities
Preferred:
Experience with various testing equipment, standards, and methodologies to include manual and automated testing
Ability to prepare complex and professional test plans, test procedures, and test reports in order to demonstrate compliance to system requirements
Familiarity with Product and Quality Assurance principles and experienced in generation and disposition of product non-conformances
Experience performing certification testing for various certification organizations (i.e. FAA, NASA, DoD)
Ability to read schematics, use service manuals, follow test procedures, and use logical trouble shooting techniques
Background in the Aerospace and Defense Industry
IMPORTANT NOTICE:
To conform to U.S. Government international trade regulations, applicant must be a U.S. Citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State or U.S. Department of Commerce.
The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)
Job Location: Louisville CO
Per Diem: --
Overtime: --
Start Date: 2022-01-26
Input Date: 06/10/2025
Attention: Corey Halliday
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Engineer II (Contract)
Do you have an eye for detail and enjoy working with amazing products and tools? Join us in championing and protecting explorers and heroes!
- As a Test Engineer, you will be using your skills and expertise to simulate, test, certify and improve cutting edge products and services. These cover a very wide range from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. You'll develop complex test plans and procedures for a variety of systems to ensure the verification and validation of all product requirements. You will also be involved with the execution of the tests using top industry tools. As a cross functional engineer, you'll test system and component level new products and develop new test processes throughout the product lifecycle.
Must-haves:
Bachelor's of Science degree in Engineering or other related discipline and typically 3 or more years of experience
Conceptual knowledge of engineering principles and practices
Familiarity working in multi-disciplinary design and development teams
Knowledge of requirements management, system design, and systems integration
Exposure to planning, conducting and documenting Verification and Validation (V&V) activities
Preferred:
Experience with various testing equipment, standards, and methodologies to include manual and automated testing
Ability to prepare complex and professional test plans, test procedures, and test reports in order to demonstrate compliance to system requirements
Familiarity with Product and Quality Assurance principles and experienced in generation and disposition of product non-conformances
Experience performing certification testing for various certification organizations (i.e. FAA, NASA, DoD)
Ability to read schematics, use service manuals, follow test procedures, and use logical trouble shooting techniques
Background in the Aerospace and Defense Industry
IMPORTANT NOTICE:
To conform to U.S. Government international trade regulations, applicant must be a U.S. Citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State or U.S. Department of Commerce.
The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)
Job Location: Louisville CO
Per Diem: --
Overtime: --
Start Date: 2022-02-23
Input Date: 06/10/2025
Attention: Corey Halliday
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Engineer III (Contract)
Do you have an eye for detail and enjoy working with amazing products and tools? Join us in championing and protecting explorers and heroes!
- As a Test Engineer, you will be using your skills and expertise to simulate, test, certify and improve cutting edge products and services. These cover a very wide range from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. You'll develop complex test plans and procedures for a variety of systems to ensure the verification and validation of all product requirements. You will also be involved with the execution of the tests using top industry tools. As a cross functional engineer, you'll test system and component level new products and develop new test processes throughout the product lifecycle.
Must-haves:
Bachelor's of Science degree in Engineering or other related discipline and typically 5 or more years of experience
Knowledge of engineering principles and practices
Experience working in multi-disciplinary design and development teams
Knowledge of requirements management, system design, and systems integration
Experience with planning, conducting and documenting Verification and Validation (V&V) activities
Preferred:
Experience with various testing equipment, standards, and methodologies to include manual and automated testing
Ability to prepare complex and professional test plans, test procedures, and test reports in order to demonstrate compliance to system requirements
Familiarity with Product and Quality Assurance principles and experienced in generation and disposition of product non-conformances
Experience performing certification testing for various certification organizations (i.e. FAA, NASA, DoD)
Ability to read schematics, use service manuals, follow test procedures, and use logical trouble shooting techniques
Background in the Aerospace and Defense Industry
IMPORTANT NOTICE:
To conform to U.S. Government international trade regulations, applicant must be a U.S. Citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State or U.S. Department of Commerce.
The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)
Job Location: Louisville CO
Per Diem: --
Overtime: --
Start Date: 2022-05-16
Input Date: 06/10/2025
Attention: Corey Halliday
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Engineer III (Contract)
Do you have an eye for detail and enjoy working with amazing products and tools? Join us in championing and protecting explorers and heroes!
- As a Test Engineer, you will be using your skills and expertise to simulate, test, certify and improve cutting edge products and services. These cover a very wide range from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. You'll develop complex test plans and procedures for a variety of systems to ensure the verification and validation of all product requirements. You will also be involved with the execution of the tests using top industry tools. As a cross functional engineer, you'll test system and component level new products and develop new test processes throughout the product lifecycle.
Must-haves:
- Bachelor's of Science degree in Engineering or other related discipline and typically 5 or more years of experience Knowledge of engineering principles and practices Experience working in multi-disciplinary design and development teams Knowledge of requirements management, system design, and systems integration Experience with planning, conducting and documenting Verification and Validation (V&V) activities
Preferred:
- Experience with various testing equipment, standards, and methodologies to include manual and automated testing Ability to prepare complex and professional test plans, test procedures, and test reports in order to demonstrate compliance to system requirements Familiarity with Product and Quality Assurance principles and experienced in generation and disposition of product non-conformances Experience performing certification testing for various certification organizations (i.e. FAA, NASA, DoD) Ability to read schematics, use service manuals, follow test procedures, and use logical trouble shooting techniques Background in the Aerospace and Defense Industry
IMPORTANT NOTICE:
To conform to U.S. Government international trade regulations, applicant must be a U.S. Citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State or U.S. Department of Commerce.
The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)
Job Location: Louisville CO
Per Diem: --
Overtime: --
Start Date: 2022-05-16
Input Date: 06/10/2025
Attention: Corey Halliday
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Equipment Software Engineer
A Test Equipment Software Engineer job in Grand Rapids, MI is currently available at Belcan. This is a full-time direct position with benefits. To be considered, you will need a Bachelor's Degree in Computer Science, Computer Engineering, Electrical Engineering or a similar discipline. In this job, you will support full life cycle software development for applications controlling avionics test equipment.
Software Engineer job duties include:
· Develop test equipment software used to test avionics systems in manufacturing and engineering environments.
· Complete entire software development life cycle for software applications, including requirements, design, code, and verification
· Use the latest emerging technologies and tools to solve complex engineering problems, working alongside product domain experts and technical professionals
· Author test software scripts and code using test equipment software integrated development environments.
· Analyze existing software to develop and evaluate solutions to problem reports.
Job Qualifications:
· BS degree in Computer Science, Computer Engineering, Electrical Engineering or a similar discipline
· Engineers who do well in this role are experienced with the architecture of complex test systems used to test electronic Line Replaceable Units (LRU).
· Demonstrated experience developing software running on test equipment computers.
Desired Skills:
· Experience programming applications using National Instruments LabWindows/CVI is required. The ideal candidate would have experience with both current and legacy versions of LabWindows/CVI.
· Experience developing test scripts using National Instruments TestStand is required.
· Knowledge of aircraft systems or other safety critical systems is important.
· Experience writing software requirements and software design documentation is important.
If you are interested in this Test Equipment Software Engineer job in Grand Rapids, MI, please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.
Belcan is an equal opportunity employer. EOE/M/F/D/V
Build a challenging and rewarding career with an industry leader!
http://belcan.com/
Job Location: Grand Rapids, MI
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 06/10/2025
Attention: SumitDas
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wire Design and Electrical/Electronic Installation Design
Job Description:
Develops and maintains basic cable/wire harness detail and assembly designs. Assists with engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Develops and maintains basic electrical product detail, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry, antennas).Follows documented processes, specifications and procedures that support the design and manufacture of electrical commodities. Collects data to support the development of statements of work. Assists in data gathering of supplier capabilities. Reviews functional and physical input used in the development of integrated design and system architecture. Works under close supervision.
Position Responsibilities:
o Develops and maintains cable/wire harness detail and assembly designs
o Supports analysis and design reviews
o Develops and maintains electrical product detail, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry, antennas)
o Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests)
o Follows documented processes, specifications and procedures that support the design and manufacture of electrical commodities
o Supports the development of statements of work
o Assists in the technical review of supplier capabilities to facilitate source selection
o Analyzes functional and physical input used in the development of integrated design and system architecture
o Works under general supervision
Basic Qualifications (Required Skills / Experience):
o Bachelors of Science degree or higher
o College coursework and/or work experience with computer aided design tools and systems (e.g., computer aided design / computer aided manufacturing (CAD / CAM) software)
o MS Office Suite (i.e. Word, Excel, PowerPoint) experience
Preferred Qualifications (Desired Skills / Experience):
o Mentor Graphics Capital (MGC) or Enovia experience
o CATIA V5 experience
o Experience in wire harness design, wire harness installation or equipment installation
o College coursework and/or work experience with design, production, and build processes is a PLUS
o Communicator, working in teams
Typical Education / Experience:
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically < 2 years' related work experience or an equivalent combination of technical education and experience (e.g. Master). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.
Job Location: Ridley Park, PA
Rate: $46/hr
Per Diem: Split
Overtime: Possible
Duration: 12 months
Start Date: ASAP
Input Date: 06/10/2025
Attention: Jorge Garcia
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wire Design and Install Engr 2 - Electrical/Electronic Installation Design
This is a very exciting opportunity to work with one of the world's largest aerospace companies!
The contracts are regularly extended and direct opportunities are often available.
Description:
Wire Design & Install Engineer Level 2Develops and maintains cable/wire harness detail and assembly designs. Supports analysis and design reviews. Develops and maintains electrical product detail, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry, antennas).Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Follows documented processes, specifications and procedures that support the design and manufacture of electrical commodities. Supports the development of statements of work. Assists in the technical review of supplier capabilities to facilitate source selection. Analyzes functional and physical input used in the development of integrated design and system architecture. Works under general supervision.
Job Description
we are all innovators on a mission to connect, protect, explore and inspire. From the seabed to outer space, you'll learn and grow, contributing to work that shapes the world. Find your future with us.
seeking a Wire Design & Install Engineer to join the Philadelphia Design Center with the focus being on collaboration with the Electrical Design Team to create electrical designs in support of various projects and programs throughout the Boeing Enterprise. This Level 2 position will physically reside in Ridley Park, PA.
Position Responsibilities
Duties will include (but are not limited to):
o Develops and maintains cable/wire harness detail and assembly designs
o Supports analysis and design reviews
o Develops and maintains electrical product detail, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry, antennas)
o Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests)
o Follows documented processes, specifications and procedures that support the design and manufacture of electrical commodities
o Supports the development of statements of work
o Assists in the technical review of supplier capabilities to facilitate source selection
o Analyzes functional and physical input used in the development of integrated design and system architecture
o Works under general supervision
Work Authorization
o This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. 120.15 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee.
Basic Qualifications (Required Skills / Experience):
o Bachelors of Science degree or higher
o CATIA V5 experience is required
o MS Office Suite (i.e. Word, Excel, PowerPoint) experience
Preferred Qualifications (Desired Skills / Experience):
o Mentor Graphics Capital (MGC) or Enovia experience
o Experience in wire harness design, wire harness installation or equipment installation
o College coursework and/or work experience with Boeing design, production, and build processes is a PLUS
o Can obtain Secret Security Clearance is preferred, but not required
Typical Education / Experience:
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 2 or more years' related work experience or an equivalent combination of technical education and experience (e.g. Master). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.
Relocation:
This position will be located in Ridley Park, PA and does not offer relocation assistance. Applicants must reside locally or be willing to relocate at their own expense for the opportunity.
Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
All information provided will be checked and may be verified.
| Skills: | Bachelor's degree in engineering is required Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 2 or more years' related work experience or an equivalent combination of technical education and experience (e.g. Master). In the USA, ABET accreditation is the preferred, although not required, accreditation standard. | |||||
|---|---|---|---|---|---|---|
The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.
We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.
We have a national medical, dental and vision plan with United Healthcare and we also have a robust 401K offering. In some cases there is bonus potential, sick pay and holiday pay for those who qualify.
The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)
The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)
Job Location: Ridley Park PA
Per Diem: --
Overtime: --
Start Date: 2022-01-19
Input Date: 06/10/2025
Attention: Kimra Stone
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wire Design and Install Engr 3 - Electrical/Electronic Installation Design
This is a very exciting opportunity to work with one of the world's largest aerospace companies!
The contracts are regularly extended and direct opportunities are often available.
Description:
Develops and maintains electrical/mechanical product detail, assembly and installation designs for misc. electrical equipment installations (e.g., equipment racks, power panels, lights, antennas, etc.). Analyzes results and performs design reviews. Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Using design tools (CATIA V4, V5, ENOVIA, PDM, IVT) prepares documentation and incorporates design changes. Documents processes, specifications and procedures that support the design and manufacture of electrical commodities by applying company, industry and governmental standards. Participates in technical review of supplier capabilities to facilitate source selection. Analyzes functional and physical input to assure development of complete integrated design. Coordinates activities and products with internal partners and external suppliers. Should be familiar with sheet metal and machine design, basic stress analysis and material properties, electrical bonding and grounding methods.
| Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 5 or more years' related work experience. Previous Boeing experience is a plus. SKILLS: Computer Aided Design tools (CATIA V4, V5, ENOVIA, PDM, IVT) Drawings/Data Sys and Models Elec Parts/Mat/Processes Engr Knowledge/Comprehension Wiring/Equip Install Design |
Locations: Puget Sound area - location will be determined when offer is released.
Remote, onsite or a combination of both: Prefers to work onsite, would accommodate remote.
Ok with out of state candidate as long as they can relocate at their own expense.
Start time flexible between 6:00 am and 8:00 AM
Remote, onsite or a combination of both: Prefers to work onsite, would accommodate remote.
Ok with out of state candidate as long as they can relocate at their own expense.
Start time flexible between 6:00 am and 8:00 AM
The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.
We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.
We have a national medical, dental and vision plan with United Healthcare and we also have a robust 401K offering. In some cases there is bonus potential, sick pay and holiday pay for those who qualify.
The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)
The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)
Job Location: Everett WA
Per Diem: --
Overtime: --
Start Date: 2022-05-02
Input Date: 06/10/2025
Attention: Kimra Stone
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wire Design and Install Engr 3 - HOT!!
Very exciting opportunity to work with one of the world's largest aerospace companies!
The contracts are regularly extended and direct opportunities are often available.
Description:
Seeking experienced Avionics/Electrical Design and/or Lab Design & Integration engineers.The candidate will provide engineering integration and support technical design decisions diverse projects including development of lab verification strategy and architecture, breakdown of verification requirements, lab design including equipment placement, wiring pin-to-pin, wire diagrams, lab harness design, lab harness installation, equipment installation, rack design, troubleshooting, lab automation, simulation, and verification activities for aircraft development and modifications within our Oklahoma City Program Portfolios.
Other job responsibilities may include
* Works with customers to develop and document complex avionics, electronic and electrical system requirements and design for labs.
* Analyzes and translates requirements into system architecture, hardware and software designs and interface specifications.
* Analyzes results and performs design reviews
* Develops and maintains electrical product detail, assembly and installation designs (e.g., equipment racks, power panels, cable rouing and geometry, antennas)
* Supporting programs with the overall integration, Tests and validates to ensure system designs meet operational and functional requirements.
* Analyzes functional and physical input to assure development of complete integrated design
* Monitors supplier performance to ensure system integration and compliance with requirements.
* Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle.
* Participates in technical review of supplier capabilities to facilitate source selection
Basic Qualifications (Required Skills and Experience)
Experience in wire design tools such as Mentor Capital, WIRS, CEEDS, and/or an equivalent avionics wire design system is highly desired.
Experience with requirements management software (e.g. DOORS) AND/OR Model Based Systems Engineering (MBSE) and Model Based Engineering through-out the development lifecycle.
Experience on aircraft or avionics development program(s) and in engineering labs is a plus.
Must possess good organizational, interpersonal, and problem solving skills.
Must have demonstrated a strong work ethic and sense of urgency for completing assigned work with a history of meeting commitments.
Ability to adjust priorities to multiple demands and unanticipated events.
Degree and typical experience in engineering classification: Bachelor's and 5 or more years' experience, Master's degree with 3 or more years' experience or PhD degree with experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study in engineering. ABET in electrical engineering is the preferred, although not required, accreditation standard.
The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.
We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.
We have a national medical, dental and vision plan with United Healthcare and we also have a robust 401K offering. In some cases there is bonus potential, sick pay and holiday pay for those who qualify.
The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)
The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)
Job Location: Oklahoma City OK
Per Diem: --
Overtime: --
Start Date: 2022-01-11
Input Date: 06/10/2025
Attention: Kimra Stone
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wire Design and Install Engr 4 - HOT!!!
Very exciting opportunity to work with one of the world's largest aerospace companies!
The contracts are regularly extended and direct opportunities are often available.
Description:
Avionics/Electrical Design and/or Lab Design & Integration engineers.
The candidate will provide engineering integration and support technical design decisions for diverse projects including development of aircraft design and lab verification strategy and architecture, breakdown of verification requirements, design including equipment placement, wiring pin-to-pin, wire diagrams, lab harness design, lab harness installation, equipment installation, rack design, troubleshooting, lab automation, simulation, and verification activities for aircraft development and modifications within our Portfolios.
Other job responsibilities may include
Works with customers to develop and document complex avionics, electronic and electrical system requirements and design for labs.
Analyzes and translates requirements into system architecture, hardware and software designs and interface specifications.
Analyzes results and performs design reviews
Develops and maintains electrical product detail, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry, antennas)
Supporting programs with the overall integration, Tests and validates to ensure system designs meet operational and functional requirements.
Analyzes functional and physical input to assure development of complete integrated design
Monitors supplier performance to ensure system integration and compliance with requirements.
Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle.
Participates in technical review of supplier capabilities to facilitate source selectio
Basic Qualifications (Required Skills and Experience)
Experience in wire design tools such as Mentor Capital, WIRS, CEEDS, and/or an equivalent avionics wire design system is highly desired.
Experience with requirements management software (e.g. DOORS) AND/OR Model Based Systems Engineering (MBSE) and Model Based Engineering through-out the development lifecycle.
Experience on aircraft or avionics development program(s) and in engineering labs is a plus.
Must possess good organizational, interpersonal, and problem solving skills.
Must have demonstrated a strong work ethic and sense of urgency for completing assigned work with a history of meeting commitments.
Ability to adjust priorities to multiple demands and unanticipated events.
Highly motivated and must work well in a team environment.
The ability to communicate effectively, both verbally and in writing.
Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, Master's degree with 7 or more years' experience or PhD degree with experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering. ABET in electrical engineering is the preferred, although not required, accreditation standard.
The candidate will provide engineering integration and support technical design decisions for diverse projects including development of aircraft design and lab verification strategy and architecture, breakdown of verification requirements, design including equipment placement, wiring pin-to-pin, wire diagrams, lab harness design, lab harness installation, equipment installation, rack design, troubleshooting, lab automation, simulation, and verification activities for aircraft development and modifications within our Portfolios.
Other job responsibilities may include
Works with customers to develop and document complex avionics, electronic and electrical system requirements and design for labs.
Analyzes and translates requirements into system architecture, hardware and software designs and interface specifications.
Analyzes results and performs design reviews
Develops and maintains electrical product detail, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry, antennas)
Supporting programs with the overall integration, Tests and validates to ensure system designs meet operational and functional requirements.
Analyzes functional and physical input to assure development of complete integrated design
Monitors supplier performance to ensure system integration and compliance with requirements.
Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle.
Participates in technical review of supplier capabilities to facilitate source selectio
Basic Qualifications (Required Skills and Experience)
Experience in wire design tools such as Mentor Capital, WIRS, CEEDS, and/or an equivalent avionics wire design system is highly desired.
Experience with requirements management software (e.g. DOORS) AND/OR Model Based Systems Engineering (MBSE) and Model Based Engineering through-out the development lifecycle.
Experience on aircraft or avionics development program(s) and in engineering labs is a plus.
Must possess good organizational, interpersonal, and problem solving skills.
Must have demonstrated a strong work ethic and sense of urgency for completing assigned work with a history of meeting commitments.
Ability to adjust priorities to multiple demands and unanticipated events.
Highly motivated and must work well in a team environment.
The ability to communicate effectively, both verbally and in writing.
Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, Master's degree with 7 or more years' experience or PhD degree with experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering. ABET in electrical engineering is the preferred, although not required, accreditation standard.
The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.
We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.
We have a national medical, dental and vision plan with United Healthcare and we also have a robust 401K offering. In some cases there is bonus potential, sick pay and holiday pay for those who qualify.
The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)
The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)
Job Location: Oklahoma City OK
Per Diem: --
Overtime: --
Start Date: 2022-01-11
Input Date: 06/10/2025
Attention: Kimra Stone
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com
THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wire Design and Install Engr 4 - Electrical/Electronic Installation Design
This is a very exciting opportunity to work with one of the world's largest aerospace companies!
The contracts are regularly extended and direct opportunities are often available.
Description:
Develops and maintains electrical/mechanical product detail, assembly and installation designs for misc. electrical equipment installations (e.g., equipment racks, power panels, lights, antennas, etc.). Analyzes results and performs design reviews. Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Using design tools (CATIA V4, V5, ENOVIA, PDM, IVT) prepares documentation and incorporates design changes. Documents processes, specifications and procedures that support the design and manufacture of electrical commodities by applying company, industry and governmental standards. Participates in technical review of supplier capabilities to facilitate source selection. Analyzes functional and physical input to assure development of complete integrated design. Coordinates activities and products with internal partners and external suppliers. Should be familiar with sheet metal and machine design, basic stress analysis and material properties, electrical bonding and grounding methods.
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience. Previous Boeing experience is a plus.
SKILLS:
Computer Aided Design tools (CATIA V4, V5, ENOVIA, PDM, IVT)
Drawings/Data Sys and Models
Elec Parts/Mat/Processes
Engr Knowledge/Comprehension
Wiring/Equip Install Design
Works independently with minimal direction required
SKILLS:
Computer Aided Design tools (CATIA V4, V5, ENOVIA, PDM, IVT)
Drawings/Data Sys and Models
Elec Parts/Mat/Processes
Engr Knowledge/Comprehension
Wiring/Equip Install Design
Works independently with minimal direction required
Locations: Puget Sound area - location will be determined when offer is released.
Remote, onsite or a combination of both: Prefers to work onsite, would accommodate remote.
Ok with out of state candidate as long as they can relocate at their own expense.
Start time flexible between 6:00 am and 8:00 AM
Remote, onsite or a combination of both: Prefers to work onsite, would accommodate remote.
Ok with out of state candidate as long as they can relocate at their own expense.
Start time flexible between 6:00 am and 8:00 AM
The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.
We support the majority of Aerospace OEM's and Tier 1 Suppliers across the United States.
We have a national medical, dental and vision plan with United Healthcare and we also have a robust 401K offering. In some cases there is bonus potential, sick pay and holiday pay for those who qualify.
The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)
The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEM's and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)
Job Location: Everett WA
Per Diem: --
Overtime: --
Start Date: 2022-05-02
Input Date: 06/10/2025
Attention: Kimra Stone
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com
| Back to Advanced Job Search | |