Job Search Results

829 listings were found that matched your search words: Keywords: Software ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2024/03/19 Tuesday 12:36AM Pacific Time by ContractJobHunter. )

Listings 1 - 829

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerodynamics/Flight Sciences - California

Description:
MUST BE US PERSONS
We are looking for an Aerodynamicist for a contracting job located in California, to assist with the development of some less experienced engineers and pick up analysis tasks. This can be a full-time position BUT is even open to those who can only work on a part-time basis (20-30 hours per week).

Basic requirements:
%u2022 15+ years of experience with an aircraft OEM, NASA or USAF in some of the following fields:
o Aerodynamics analysis and CFD
o Aero Thermal analysis
o Wind Tunnel
o Performance and Handling Qualities
o Stability and Control
o Loads Development
o Flutter
%u2022 Experience mentoring or leading team members
%u2022 Experience with full aircraft analysis %u2013 subsonic and transonic required, supersonic desirable.
%u2022 BS degree in Aero from accredited institution, MS desirable
Applicants must be U.S. persons as defined by the ITAR

The Structures Company is an AA/EOE.
 
Job Location: Mojave, CA
Rate: $75-85/hr DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Air Systems Engineer (ECS)

Description:
Our client is seeking an Aerospace engineer with Air Systems/ECS experience to join the team in Seattle, WA. The ideal candidate will possess aircraft certification experience with a specialty in environmental control systems.

Essential Functions:
� Coordinate system test and certification requirements.
� Author flight test and ground test specifications.
� Support flight test and ground test activities.
� Analyze test data and evaluate system operation.
� Prepare test reports.
� Domestic and occasional international travel is required.
Desired Qualifications:
� 5+ years� experience with CPCS (Cabin pressurization control system), flow balancing, smoke penetration and detection, valve and control logic, failure cases, OHD (overheat detection), cabin pull-up/pull-down, hot and cold weather deployments
� Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
� Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
� Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
� A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
� Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
� Ability to represent the client professionally and positively during client interactions and meetings.
� Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
� Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

Candidates must have legal authorization to work in the United States, Canada or Mexico
 
Job Number: ECS/SEA
Job Location: Seattle, WA
Per Diem: possible
Overtime: possible
Duration: lt
Start Date: asap
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Dawn Bergau
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineer, Electrical

Description:
Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEMs. They have a growing team of aerospace engineers, technicians, mechanics, and specialist consultants that support multiple programs in the aerospace industry.
They are seeking an Aerospace engineer with electrical systems experience to join the team. The ideal candidate will possess aircraft certification experience with a specialty in electrical systems.
Essential Functions:
Coordinate system test and certification requirements.
Support flight test and ground test activities.
Analyze test data and evaluate system operation.
Prepare test reports.
Domestic and occasional international travel is required.
Desired Qualifications:
Understanding of power distribution system, failure cases, load shedding, electrical power management
Understanding of EWIS and wiring a plus
5+ years relevant work experience related to electrical systems integration and certification. Should include experience with power generation, control, distribution and integration with the aircraft.
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
Ability to represent the client professionally and positively during client interactions and meetings.
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
 
Job Number: LA
Job Location: Fort Worth, TX
Per Diem: possible
Overtime: possible
Duration: LT
Start Date: asap
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Lynn Launer
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineer, Electrical

Description:
Essential Functions:
Coordation experience with a specialty in electrical systems.inate system test and certification requirements.
Support flight test and ground test activities.
Analyze test data and evaluate system operation.
Prepare test reports.
Domestic and occasional international travel is required.
Desired Qualifications:
Understanding of power distribution system, failure cases, load shedding, electrical power management
Understanding of EWIS and wiring a plus
5+ years relevant work experience related to electrical systems integration and certification. Should include experience with power generation, control, distribution and integration with the aircraft.
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
Ability to represent the client professionally and positively during client interactions and meetings.
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.

If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

Candidates must have legal authorization to work in the United States, Canada or Mexico
 
Job Number: Elect/Sea
Job Location: seattle, wa
Per Diem: possible
Overtime: possible
Duration: LT
Start Date: asap
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Project Engineer

Description:
Aerospace Project Engineer

Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

The strategic purpose of the Test and Evaluation Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations.

Seeking a Project Engineers with Flight Test experience to join the team in Seattle, WA. The ideal candidate will possess 4+ years of experience in one of the following disciplines.
Flight Test Management Software
Flight Test Trouble Shooting Processes
Flight Test Equipment Management / Coordination
Aerospace Project Engineering
Bachelor�s Degree in Software Engineering, Aerospace Engineering, Mechanical Engineering, Project Management or a related subject (or equivalent combination of work and experience).
Four or more years of aerospace and/or project management experience. Flight Test environment preferred, but not required.
If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Candidates must have legal authorization to work in the United States, Canada or Mexico
 
Job Location: Moses Lake, WA
Per Diem: Split possible
Start Date: asap
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Dawn Bergau
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Air Systems Engineer (ECS)

Description:
Our client is seeking an Aerospace engineer with Air Systems/ECS experience to join the team in Seattle, WA. The ideal candidate will possess aircraft certification experience with a specialty in environmental control systems.

Essential Functions:
� Coordinate system test and certification requirements.
� Author flight test and ground test specifications.
� Support flight test and ground test activities.
� Analyze test data and evaluate system operation.
� Prepare test reports.
� Domestic and occasional international travel is required.
Desired Qualifications:
� 5+ years� experience with CPCS (Cabin pressurization control system), flow balancing, smoke penetration and detection, valve and control logic, failure cases, OHD (overheat detection), cabin pull-up/pull-down, hot and cold weather deployments
� Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
� Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
� Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
� A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
� Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
� Ability to represent the client professionally and positively during client interactions and meetings.
� Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
� Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

Candidates must have legal authorization to work in the United States, Canada or Mexico
 
Job Number: ECS/SEA
Job Location: seattle, wa
Per Diem: possible
Overtime: Yes
Duration: LT
Start Date: asap
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airframe Structural Analysis

Description:
REQUIRED SKILLS
Education: BSME/Aerospace Eng. required, MS preferred

WORK EXPERIENCE
10+ years experience in airframe structural analysis of metallic primary structures. Additional airframe advanced composite primary structure experience preferred. Experience with finite element modeling and analysis and familiarity with airframe structural testing and instrumentation practices. In-depth application of fatigue concepts and methodology. Familiarity with fracture mechanics principles/ methodology.

SOFTWARE EXPERIENCE
NASTRAN/PATRAN or equivalent FEM, Mathcad or equivalent math tools, Stress and strain based fatigue methods, MS Office applications and familiarity with Catia.

DUTIES AND ESSENTIAL FUNCTIONS
The Airframe Structural Analysis Core Competency Unit is responsible for insuring the structural integrity of the airframe fuselage, landing gear and propulsion installations and all other attachments to airframe fuselage, including electrical, controls and dynamic systems attachments. Structural integrity responsibilities cover composite and conventional structures and extend from conceptualization on through development, manufacturing and field service support. In fulfilling its function, adherence to the appropriate design criteria and other directives mandated by the customer and or regulatory agencies is strictly maintained. Specific functions include: Static structural analysis and Margin of Safety determination, finite element modeling of airframe structures using PATRAN/NASTRAN and stress-life fatigue analysis using Sikorsky standard work procedures.

US Citizenship (No dual citizenships.) required.
Over Time not guaranteed.
 
Job Number: 16-637-1394
Job Location: Southeast
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
B1 - SYSTEMS SAFETY ENG

Description:
DESCRIPTION
Support lead system safety engineer(s) to promote safety as an attribute of design for complex, safety critical systems under development for the H-60 / Combat Rescue Helicopter product line. Candidates must have experience working with Product Development Teams in order to influence hardware and software design and produce and/or update the following deliverables:
Safety Assessment Reports
System & Subsystem Safety Analyses
Functional Hazard Assessments
Hazard Tracking Records

DUTIES INCLUDE
Applying scientific and engineering principles and experience to identify potential safety hazards and working with engineering disciplines to eliminate and/or mitigate identified hazards.

SKILLS
The candidate must be able to communicate both verbally, and through written presentations, to the Product Development Teams, Management, and External Customers.
Candidate must have a working knowledge of MIL-STD-882 and/or SAE ARP4761. Knowledge of AR 385-10, DA PAM 385-16 is a plus. Experience in aviation/rotary wing design, maintenance, and/or operations desired but not essential.

EDUCATION
BS Engineering degree or AS with rotorcraft experience required.
 
Job Number: 16-618-1379
Job Location: Northeast
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC - Programming - Contract

Description:
Manufacturing Engineer CNC Programming Contract

Client needs candidates for the position of Manufacturing Engineer CNC Programmer. Must have experience with complex aerospace programming using Espirit.



Must be a US Person, Citizen or Green Card holder.
Supports production from a technical standpoint.

This is a contract position located in Rockford, IL with an expected duration of 18 months.

Principal Responsibilities:

Supports technical solutions
5+ years CNC programming experience, including:
o Horizontal Machining Centers with 5th axis table or Multi- Axis Mill/Turn
o Experience programming in Esprit, Unigraphics, or DelCam
Ability to select proper cutting tools for aluminum/stainless steel
Knowledge of applicable work holding methods
GD&T and Blueprint knowledge
Must be able to emulate Clients system and proven way of processing
Hands on machining experience
Vericut experience
WinTool experience
Strong written and verbal communication
Ability to function as a team member
Learns the steps involved to incorporate process improvements
Supports the manufacturing floor for any process related questions
Creates and maintains process documentation and updates work order documentation
Supports implementation of basic engineering changes
Adheres to applicable Quality System requirements
Supports Process Flow Charts, PFMEA, and Control Plans
Learns from more senior Operations Engineers. May guide/direct Manufacturing Specialists.
General understanding of all applicable software





Education: Bachelor's degree in technical/science or math discipline preferred.

Due to the requirements of the customer, no visa sponsorship is available.

Ingenium Technologies Corporation is a leading engineering services organization, providing outsourcing, consulting, and talent solutions.

Employment Statement: Ingenium Technologies is an equal opportunity employer and does not discriminate on the basis of race, color, religion, gender, age, national origin, disability, veteran status, sexual orientation or any other classification protected by federal, state or local law. Proof of eligibility for employment will be required upon employment.
 
Job Number: 45404a
Job Location: Rockford, IL Illinois
Rate: $45
Per Diem: possible
Overtime: possible
Duration: 12-18 mos
Start Date: 8-10-16
Input Date: 11/14/2020
Firm Name: INGENIUM TECHNOLOGY
Attention: David Johnson
Address: 4216 MARAY DR UNIT A1
City, State: ROCKFORD, IL 61107
Phone: 815/315-9273
Fax Phone: 815/399-8804
Website: www.ingeniumtech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Programmer (NX)

Description:
Responsibilities:
�Strong GD&T understanding
�Provide programming writing/support for various CNC turning, and 3, 4, and 5 axis milling operations.
�Manufacturing process planning from forging/casting to completion.
�Fixture and Tooling design.
�Ability to determine hours of machining operations from blueprints for quoting purposes.
�Ability to create solid models in Unigraphics or similar CAD/CAM software listed below.
�Daily interface with all manufacturing and quality functions.
�Interface with customers and suppliers to resolve process and design issues.
�Understand and ability to incorporate lean manufacturing in cell environment.
�Other Engineering/Programming related duties as assigned by management.

Requirements:
�5 years direct CNC machining/programming experience with multi-axis machines, milling equipment, and lathes.
�A BS in Engineering, Manufacturing, Engineering Technology or similar technical degree preferred but not required.
�Strong knowledge of Unigraphics (NX7) and/or Surfcam. Willingness to train in either language as required.
�Ability to interpret complex blueprints, define cutting tools and prepare a machining programs and tool sheets.
�Experience in the following alloy groups; steel, titanium, stainless, nickel alloy, and aluminum.
�Successful experience in CNC programming large parts 24� in diameter through 120� using good machine shop practices in the Aerospace or Power Generation Industry preferred.
�Experience leading and solving problems to improve business processes.
�Excellent written and oral communication skills.
�Must be a team player and have the ability to work in a cross functional environment.
 
Job Number: 36146
Job Location: CT
Rate: Direct Hire
Per Diem: split
Overtime: possible
Duration: C2P
Start Date: asap
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Erica Price
Address: WESTRIDGE OFFICE PARK
2646 HIGHWAY 109 STE 207

City, State: WILDWOOD, MO 63040
Phone: 636/438-0312
800 Phone: 866/277-3343
Fax Phone: 636/220-8284
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Programmer IV / MUST have Current and Strong NX Programming / MUST have Aerospace machining experience CA

Description:
Job Title: CNC Programmer IV
Job Number: 157139/5808110
Location: Canoga Park, CA
Compensation: 60/hr max
Assignment length: 12 months contract

Description:


** Candidates MUST have Current and Strong NX Programming experience **



** Candidates MUST have Aerospace machining experience **



50% - The NC Programmer is responsible for writing new CNC programs, setup instructions, estimating and making changes to existing CNC programs. Will develop, write and maintain NC programs using engineering models, drawings and specifications to support a zero defects machining operations environment. Selects program routines for the most efficient machining methods for each part. Will be involved in the prove out of new technology, first article inspection, fixture design, and day to day programming using Siemens NX CAM.



10% - Analyzes engineering models/drawings to define the sequence of machining operations to ensure that the design intent and component quality is achieved.



5% - Make proper cutting tool selections, taking into consideration such factors as materials, speeds, type of cutters, feeds and control system imitations.



10% - Use machine simulation and optimization software to troubleshoot/validate CNC programs and ensure highly efficient and 100% defect-free FTT machining processes.



10% - Modify existing parts programs for engineering changes or program improvements.



5% - Work closely with Machinists, Quality, Engineering, Management and other team members.



5% - Develop, write and maintain type II probe and logic macros to perform on machine touch probe measuring, fixture updates, cutter offset updates, and part feature data collection.



5% - Participate in knowledge sharing and cross training activity within the NC programming group.



Skills:
Minimum 10 years experience preferred

Education:
High School diploma required.


State/Province: California
City/Town: Canoga Park

Start Date: 10/24/2016 Hours Per Week: 40.00
Est. End Date: 10/24/2017 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-5808110
Job Location: Canoga Park, CA
Rate: 60/hr max
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Programmer V

Description:
CNC Programmer V

Location: Canoga Park, CA
Rate: $60.00 - $64.00/HR
1 year contract


** Candidates MUST have Current and Strong NX Programming experience **
** Candidates MUST have Aerospace machining experience **


Duties:
50% - The NC Programmer is responsible for writing new CNC programs, setup instructions, estimating and making changes to existing CNC programs. Will develop, write and maintain NC programs using engineering models, drawings and specifications to support a zero defects machining operations environment. Selects program routines for the most efficient machining methods for each part. Will be involved in the prove out of new technology, first article inspection, fixture design, and day to day programming using Siemens NX CAM.

10% - Analyzes engineering models/drawings to define the sequence of machining operations to ensure that the design intent and component quality is achieved.

5% - Make proper cutting tool selections, taking into consideration such factors as materials, speeds, type of cutters, feeds and control system imitations.

10% - Use machine simulation and optimization software to troubleshoot/validate CNC programs and ensure highly efficient and 100% defect-free FTT machining processes.

10% - Modify existing parts programs for engineering changes or program improvements.

5% - Work closely with Machinists, Quality, Engineering, Management and other team members.

5% - Develop, write and maintain type II probe and logic macros to perform on machine touch probe measuring, fixture updates, cutter offset updates, and part feature data collection.

5% - Participate in knowledge sharing and cross training activity within the NC programming group.


Skills:
Minimum 10 years experience preferred.

Education:
High School diploma required.
 
Job Number: 6679
Job Location: Canoga Park, CA
Rate: $60.00 - $64.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Catia V5 Design Checker

Description:
1. CATIA Knowledgeware and SmarTeam experience desirable.
2. Current and up-to-date knowledge of developments in the structures/systems design disciplines 3D / MBD data requirements, as well as all interrelated disciplines of design build teams.
3. Experienced in engineering review of 3D models and PLM data for integration criteria including, but not limited to, system separation, clash analysis, kinematics and standard part usage is desirable.
4. Experience with mechanical assemblies and manufacturing technique design.
5. Excellent communication skills, written and verbal. Ability to lead daily sign off meetings.
6. Use and understanding of Dimensioning and Tolerancing including familiarity with ASME Y14.5 a must.
7. Use of Microsoft Word, Excel and Power Point for creation of reports.
 
Job Number: 24-171
Job Location: Savannah, GA
Rate: $50-$55/hr
Per Diem: YES
Overtime: YES
Duration: 1 yr+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract - Manufacturing Engineer II

Description:
Unique Skills:

SAP, Solumina, Electrical systems knowledge


Education and Experience Requirements:
Bachelors degree in Mechanical, Manufacturing Engineering or related curriculum, or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Three (3) years Manufacturing Engineering, planning, or related technical experience.


Position Purpose:

Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning).

Principal Duties and Responsibilities:

Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 9. Utilize CADAM/CATIA data and nesting software to generate flat patterns, Master Models, NC data, and ply nests to meet Engineering and Manufacturing requirements. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. 3. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 88302
Job Location: Pooler, GA
Overtime: Possible
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INTERGEN GROUP
Attention: Cort Hayes
Address: 5051 PEACHTREE PKWY STE 200
City, State: PEACHTREE CORNERS, GA 30092
Phone: 678/318-1816
Fax Phone: 678/493-1467
Website: www.intergengroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Control Systems Engineer Programmer

Description:
Position Description:

Reviews, analyzes, and modifies programming systems including encoding, testing, debugging and installing to support an organization's client/server software applications.
Accountable for field engineering support to the Resort and supporting departments, including control systems engineering services for ride, show, and other ride related control systems. These services include: planning, organizing, and leading teams in troubleshooting; problem resolution; system operational enhancement; system reliability improvement; and documentation.
Must have sufficient technical knowledge and awareness of details to be able to recognize when technical problems are developing in various disciplines, and to initiate appropriate corrective actions. Respond to mechanical and control emergencies resulting from Attraction downtimes at the Resort.

Requirements:
• Controls Systems experience with 1-5+ years in the amusement park industry or industrial/manufacturing environment
• Ride element performance analysis: dynamic, kinematic, hydraulic and pneumatic analysis and calculations
• Knowledge gained by experience in the following:
Electronic control systems and signal processing, including familiarity with relays and programmable logic controllers
Electrical motor controls including variable frequency drives and soft starts
Variety of industrial automation PLC manufacturers
National and California Electrical Code
Nationally recognized Testing Laboratory certifications such as TUV, UL, etc.
AutoCAD o Object oriented programming
C and C++ programming
Ladder logic
Wiring and interconnect diagrams
ANSI, ASTM, and IEEE standards
• Excellent oral and written communication

Bachelor of Science in Electrical Engineering, Mechatronics, Electronics Engineering, or equivalent from an ABET accredited University.
 
Job Number: JO358752
Job Location: Anaheim, CA
Duration: 12 months+
Start Date: asap
Input Date: 11/14/2020
Firm Name: CDI CORPORATION
Attention: Jonathan Oleson
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
DATABASE ADMINISTRATOR

Description:
IT professionals with 5-8 years of experience.
Ability to obtain a Secret Security Clearance is required - US CITIZENSHIP REQUIRED

DUTIES INCLUDE:
- Develop and maintain databases across the organization, while ensuring high levels of data availability and accuracy.
- Administer will be responsible for creating and populating databases and developing queries and reports.
- Design and deploy database applications, structures, forms, reports and queries.
- Coordinate and work with technical staff to develop databases and process all data.
- Produce ad-hoc queries and develop customized reports.
Software Experience

Required:
MS Access - SQL - Lotus Notes

Education:
Associates Degree or relevant experience.
 
Job Location: PA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Joseph
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer (Catia V5)

Description:
Any familiarity with structure of C130 aircraft, specifically C130J
Air Force customer experience
Experience or familiarity with engineering change documentation
Experience with Teamcenter PLM software
Active DoD secret clearance
 
Job Location: KY
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airframe Systems Integration Zone

Description:
Airframe Systems Integration Zone

Location: Savannah, GA
Duration: Long Term Contract
Pay Rate: $60/hr - $65/hr
Shift: First

Position Purpose:
The primary objective for the Airframe Systems Integration group is to ensure designs are fully integrated between the multiple design disciplines as well as manufacturing and maintainability. Other important objectives included supporting Design for Manufacturing goals of part standardization and part count reduction and providing requirements and processes for each phase of the design process.

Essential Functions:
1. Manages Installation Design of primary aircraft barrel assemblies.
2. Coordinates integration of airframe and system installations. Holds planning and review meetings as needed. Manages and reviews schedules.
3. Manages the coordination and development of parts, planning, tooling & purchase orders.
4. Has oversight over the release of engineering documentation.
5. Responsible for interface definition & configuration control of a specific aircraft barrel section.
6. Reviews engineering and manufacturing release criteria.
7. Defines when sufficient review cycle criteria have been met. Conducts risk analysis for remaining tasks.

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements.
2. Experience in communicating with employees/teams in productive and efficient manner.
3. Ability to work independently and cross-functionally.
4. Current and up-to-date knowledge of developments in the structures/systems design disciplines 3D / MBD data requirements, as well as all interrelated disciplines of design build teams.
5. Ensures designs meet customer criteria, quality standards and FAA requirements
6. Knowledge of industry design and documentation standards.
7. Use and understanding of Dimensioning and tolerancing including familiarity with ASME Y14.5 a must.
8. Experience with mechanical assemblies and manufacturing technique design.
9. Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
10. Performs other duties as assigned
11. CATIA Knowledgeware and SmarTeam experience desirable.

Education and Experience Requirements:
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
 
Job Number: 6814
Job Location: Savannah, GA
Rate: 60-65
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Validation Engineering IV

Description:
OCCUPATIONAL SUMMARY
The individual is responsible for executing projects in proper direction to obtain a certified seat structure. He/she would stand as technical specialist for design validation.

DUTIES AND RESPONSIBILITIES
A. Recommend strategies for all design validation activities with respect to applicable requirements by utilizing analytical process and testing as necessary to the DV group.
B. Will scrutinize all the analyses done by design validation engineers and propose new ideas to them.
C. Implement analytical approach and help DV staff in establishing decent correlation with test data.
D. Mentor the Design Validation Engineers and mold them per department requirements.
E. Will be responsible for software license follow up and its proper implementation.
F. Responsible for planning cost effective and robust design visions with Lead design validation engineer.
G. Comply with Zodiac Seats procedures (QAP) and certification internal procedures.
H. Responsible for analyzing weight saving structure and building tested material data base used for finite element models
I. Will be responsible for building PSM (Prescribe structure models) models.
J. Will actively work on inflatables and airbag projects.
K. Responsible for developing new ideas to control HIC (head injury criteria).
L. Provides status and schedule updates to department head and other appropriate entities on a regular basis.
M. Responsible for answering design related questions pertaining to failure of composites and seat structure.
N. Will be working simultaneously with test lab manager to obtain useful test data.
O. Advising Leads/Manager/Directors for new processes

QUALIFICATION REQUIREMENTS
KNOWLEDGE AND SKILLS
1. Must have strong background for finite element modeling tools and solvers.
2. Must have strong understanding of dynamic test modes conducted at ZSUS per FAA requirements.
3. Must have vast knowledge of airbags and occupant restraint systems along with seat structure.
4. Familiarity of FMVSS/consumers requirement is preferred but not mandatory.
5. Must have excellent knowledge of ATDs (Anthropomorhic test dummy) hardware and model.
6. Minimum of 6-8 years FEA experience using LS-Dyna, Altair HyperWorks suite.
Experience with solvers like Madymo, ABAQUS, PAMCRASH, NASTRAN is preferred.
7. Must have strong unix/linux or window based system knowledge.
8. Knowledge of composites is required.
9. Must have strong mechanical aptitude.
10. Must be detail oriented and have sound engineering judgment.
11. Must be self-motivated and a self-starter.
12. Good knowledge of Radioss, Primer, ESI-visual is preferred.
13. Must be able to communicate efficiently in writing and verbally.
14. Must be able to operate standard office equipment.
15. Must be able to generate documents such as, plans, data sheets and reports.
16. Must have ability to analyze CAD drawings.
17. Must have dynamic and static testing experience.
18. Basic Pro/E/CATIA skill is preferred.
19. Familiarity with FAA regulations, Boeing/Airbus specifications is preferred.
20. Must be able to communicate well with internal departments, customers, and regulatory agencies.
21. Must be presentable and write technical presentations

EDUCATION AND/OR EXPERIENCE
Must have a M.S. in Mechanical or Aerospace Engineering with 6-8 yr. of FEA related experience.
LS Dyna experience, minimum of 6 years required.
Supervisory experience preferred but not required.


COMMUNICATION SKILLS
Must have the ability to generate written communication and to operate required office equipment. Ability to read and review written communication. Speech and hearing abilities that allow individual to communicate clearly and distinctly in English.

REASONING ABILITY
Ability to solve problems and think strategically

PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential function of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is required to sit for long periods of time while working with computers and viewing computer monitors, and other office equipment alternated with periods of standing and walking. This position also requires extensive walking/standing to participate in activities on the shop floor. Time period may vary from day to day. Finger dexterity needed in using misc. office equipment such as telephone, typing, ten key, fax, copy machine etc. Bending, stooping, reaching and lifting up to approximately twenty pounds are required during tasks related to the job.

Listed above are the ESSENTIAL FUNCTIONS of this job classification. Employees in this job classification may be required to perform various other duties including but not limited to training, administration, and housekeeping. In addition, employees in this job classification are responsible for the quality, quantity and timeliness of the product or service they provide. They will carry out those duties, in a safe and cooperative manner, per established policies, practices and procedures. Management reserves the right to add, modify, change or rescind the work assignments of different positions and to make reasonable accommodations so that qualified employees can perform the essential functions of the job. Management reserves the right to waiver qualification requirements when experience levels are exceptional.
 
Job Number: 16-609-7432
Job Location: South-central
Rate: $70K to $90K
Per Diem: No
Overtime: Possible
Duration: DIRECT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer II with active secret / Mentor DxDesigner and OrCAD Schematic Capture schematic entry design tool / digital electronics and high speed PCB design CA

Description:
Job Title: Electrical Engineer II
Job Number: 157889/6535771
Location: El Segundo, CA
Compensation: 50/hr
Assignment Length: 12 month contract
Active secret required to start

Description:


The Secure Information Systems organization currently has a need for a Sr. Electrical Engineer to design and develop digital hardware for embedded applications. The successful candidate will be responsible for all aspects of the hardware design, including: developing requirements, detailed design, schematic entry, circuit analysis, design documentation, conducting design reviews all the way through hands-on lab testing, debug and integration. Responsibilities will also include preparing and conducting design reviews and being responsible for adhering to allocated budget and project schedule.

Required Skills:

6+ years of experience in the field of Electrical Engineering
Candidate will have a solid background in digital electronics and high speed PCB design
Must be well versed in both Mentor DxDesigner and OrCAD Schematic Capture schematic entry design tool
Have hands-on lab debug experience utilizing oscilloscopes, logic analyzers and general lab equipment and able to debug hardware/software embedded applications
Must be have prior experience developing and integrating embedded hardware platforms utilizing ARM based microprocessors and FPGAs
Experience in product development and design for manufacturing
Strong communication skills, both written and oral
Active DoD Secret Clearance
U.S. Citizenship is a requirement

Desired Skills:

Experience with Mentor DxDesigner schematic entry
Experience with Hyperlynx Signal Integrity (SI) analysis
Experience with Xilinx and Altera FPGA embedment, and ability to read and write VHDL programming language
Familiar with Earned Value Management (EVM), IMS development and proposal development process and be able to assist in the formulation of hardware bids for proposals
Familiarity with basic knowledge of cryptography and secure hardware design

Required Education:
B.S./B.A. Electrical Engineering
 
Job Number: MB-6535771
Job Location: El Segundo, CA
Rate: 50/hr max
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic Avionics Systems Design & Analysis Engineer (MO)

Description:
ACTIVE SECRET CLEARANCE REQUIRED TO START.

The F-15 Integration team is seeking an avionics integration engineer to support integration of new CNI avionics equipment into the F-15 architecture. Specifically, we have a new Signal Interface Unit (SIU) and MIDS JTRS data link equipment which needs to be integrated. This engineer will be responsible for running line item team meetings for each configuration change. This person will also be responsible for defining all Pilot Vehicle Interface (PVI) changes, including interaction with Boeing and USAF aircrews. The applicant will work on all aspects of system and subsystem requirements development, including software requirements, laboratory test requirements, laboratory test support and flight test support. Technical writing to support Technical Publication development and aircrew training will also be required. Previous experience with avionics integration, design or test and project team participation is required. Previous experience with the DOORS requirements management tool is desired. Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
 
Job Number: EEmo
Job Location: Berkeley, MO
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrophysics Engineer (MO) - ACTIVE SECRET

Description:
The selected engineer will be responsible for new modes being integrated into the F-15. Responsibilities will include requirements definition, integration, analysis and test (lab and flight) of the new modes. This position requires close coordination with the F-15 Radar Supplier, USAF customers and other F-15 teams. Develops architectures to integrate systems and components into higher level systems and platforms. Performs trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around established requirements. Defines and conducts tests to validate performance of designs to requirements. Manages appropriate aspects of supplier and partner performance to ensure compliance to requirements. Provides support to products throughout their lifecycle by developing root-cause analysis of anomalies and other engineering support as requested. Supports project management by providing work statement, budget, schedule and other required inputs and by reporting project status. Works under general direction.

This position requires an active Secret Security Clearance pre-start, with ability to obtain Special Access Clearances post-start.

Previous avionics development experience is required. Previous experience with Radar systems is highly desired. Experience with Earned Value Management systems is desired.
Radar systems Development
Complete ability to develop new technology and designs for radar system components, subsystems, and systems and associated signal processing.

Radar System Algorithms
Complete knowledge and understanding of electromagnetic theory, radar systems, signal processing and software related to radar system algorithms. Complete ability to specify requirements, analyze performance and develop new algorithm technologies related to various type of radar sensor systems, including seekers, collision and threat avoidance, fire control and synthetic apertures.

Requirements/Traceability
Complete knowledge of how to derive and allocate requirements (e.g., system, sub-system, software) and show traceability throughout the product lifecycle

Test Program Design
Complete knowledge of test program design (e.g., design of experiments, test plan development, validation).

Analytical Skills
Skill and ability to: collect, organize, synthesize, and analyze data; summarize findings; develop conclusions and recommendations from appropriate data sources at the department level.

Detailed Supplier Knowledge
Complete knowledge of manufacturing, materials and assembly processes. A fundamental knowledge of business systems for example organizational structure, manufacturing processes, risk mitigation, capacity planning, past/present delivery performance, design definition, program directives, engineering drawings, change memos, wiring diagrams and schematics, functional tests, and supplier data.

Bachelor's and 5 or more years' experience, Master's degree with 3 or more years' experience or PhD degree with experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
 
Job Number: EEmo
Job Location: Berkeley, MO
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer

Description:
***Requires Active Secret Clearance***

Description:
Lockheed Martin Missiles & Fire Control is seeking a qualified Software Engineer to work in the Grand Prairie, TX office. As a Patriot Missile (PAC-3) Hardware In The Loop (HWIL) Software Engineer, the ideal candidate will have experience with real time systems, experience with real time embedded operating systems and software, Unit Under Test (UUT) programming & integration, open architecture software development, past integration of disparate systems, and Missile Seeker integration experience. Understanding of hardware interfaces and familiarity with missile subsystems is a plus. Candidates must be able to apply the appropriate standards, processes, procedures, and tools throughout the development life cycle.

Mandatory:

The candidate should be a self-starter and possess the following skills: Clearance Required * BS in Computer Science, Software Engineering, or Related Field * C/C++ * Razor (CM Control) * ADA * Linux (Red Hat) * Domain Knowledge of Air and Missile Defense * Seeker Programming and/or Integration * Seeker Programming and/or Integration Hardware-in-the-Loop (HWIL) Unit Under Test (UUT)

Desired:
Desired Skills: Razor (CM Control)
 
Job Number: 74161
Job Location: Grand Prairie, TX
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Ram
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer - Level 3

Description:
Embedded Software Engineer - Level 3

Location: Grand Prairie, TX
Pay Rate: $85/hr - $98/hr (DOE)
Duration: 1 Year Contract
Shift: First, 9/80
*Active SECRET Clearance is required* (put on resume)

Description
As a Patriot Missile (PAC-3) Hardware In The Loop (HWIL) Software Engineer, the ideal candidate will have experience with real time systems, experience with real time embedded operating systems and software, Unit Under Test (UUT) programming & integration, open architecture software development, past integration of disparate systems, and Missile Seeker integration experience. Understanding of hardware interfaces and familiarity with missile subsystems is a plus. Candidates must be able to apply the appropriate standards, processes, procedures, and tools throughout the development life cycle.

Skill/Experience/Education
Mandatory: (must meet all requirements)
The candidate should be a self-starter and possess all of the following skills:
• Secret Clearance Required: 4+ years of experience
• BS in Computer Science, Software Engineering, or Related Field: 4+ years of experience
• C/C++: 4+ years of experience
• ADA: 4+ years of experience
• Linux (Red Hat): 4+ years of experience
• Domain Knowledge of Air and Missile Defense: 4+ years of experience
• Seeker Programming and/or Integration: 4+ years of experience
• Hardware-in-the-Loop (HWIL) – Unit Under Test (UUT) Experience: 4+ years of experience

Desired:
• Razor (CM Control): 0-3 years of experience
 
Job Number: 6928
Job Location: Grand Prairie, TX
Rate: 85-98
Per Diem: Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer - Level 3

Description:
Embedded Software Engineer - Level 3

Location: Grand Prairie, TX
Pay Rate: $85/hr - $98/hr (DOE)
Duration: 1 Year Contract
Shift: First, 9/80
*Active Secret Clearance Required*

Job Description:
As a Patriot Missile Software Engineer, the ideal candidate will have experience with:
• Embedded programming languages (i.e. C/C++)
• ADA
•Navigation states/measurements using Inertial Measurement Units (IMUs)
• Navigation Systems and Related Algorithms (design or implementation experience)
• Three-Loop Autopilot Design/Performance (implementation experience)
• Field Programmable Gate Arrays (FPGA) [interfacing experience)
• Digital Signal Processors (DSP) (deign or implementation experience)
• Domain Knowledge of Air and Missile Defense

Mandatory Skills (must meet all requirements)
The candidate should be a self-starter and possess the following skills:
• Secret Clearance Required: 4-5 Years
• BS in Computer Science, Software Engineering, or Related Field: 4-5 Years
• Embedded programming languages (i.e. C/C++): 4-5 Years
• Navigation states/measurements using Inertial Measurement Units (IMUs): 0-3 Years
• ADA: 0-3 Years
• Navigation Systems and Related Algorithms (design or implementation experience): 0-3 Years
• Three-Loop Autopilot Design/Performance (implementation experience): 0-3 Years
• Field Programmable Gate Arrays (FPGA) [interfacing experience) : 0-3 Years
• Domain Knowledge of Air and Missile Defense: 4-5 Years
Desired Skills:
• Experience with Power-On BIT (PBIT)
• Guidance Algorithms
• Trajectory controls
• Data transmissions
• Seeker Communications
• Universal asynchronous receiver/transmitter (UART)
• Serial Peripheral Interface (SPI)
• Real time operating systems (RTOS)
• Real-Time Design Patterns
• Robust Scalable Architecture for Real-Time System development
• Experience with integrating Matlab/Simulink auto generated code into embedded flight code
 
Job Number: 6927
Job Location: Grand Prairie, TX
Rate: 85-98
Per Diem: Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer with active secret TX

Description:
Job Title: Embedded Software Engineer
Job Number: 158211/1233
Location: Grand Prairie, TX
Compensation: 95/hr
Assignment Length: 12 month contract
Security Clearance Secret (Prime Contract:, Can start w/o clearance:No, Interim Clearance Sufficient:No)
Exempt
1st shift

Description:

Description
Lockheed Martin Missiles & Fire Control is seeking a qualified Software Engineer to work in the Grand Prairie, TX office. As a Patriot Missile (PAC-3) Hardware In The Loop (HWIL) Software Engineer, the ideal candidate will have experience with real time systems, experience with real time embedded operating systems and software, Unit Under Test (UUT) programming & integration, open architecture software development, past integration of disparate systems, and Missile Seeker integration experience. Understanding of hardware interfaces and familiarity with missile subsystems is a plus. Candidates must be able to apply the appropriate standards, processes, procedures, and tools throughout the development life cycle. Active SECRET Clearance is required. Will need clearance status on resume. Needs clearance from the start.

Skill/Experience/Education
Mandatory:

The candidate should be a self-starter and possess the following skills:

• Secret Clearance Required

• BS in Computer Science, Software Engineering, or Related Field

• C/C++

• Razor (CM Control)

• ADA

• Linux (Red Hat)

• Domain Knowledge of Air and Missile Defense

• Seeker Programming and/or Integration

• Seeker Programming and/or Integration

Hardware-in-the-Loop (HWIL) Unit Under Test (UUT)

Desired:

Desired Skills:

• Razor (CM Control)

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
Secret Clearance Required 4-5 Years Yes
BS in Computer Science, Software Engineering, or Related Field 4-5 Years Yes
C/C++ 4-5 Years Yes
Razor (CM Control) 0-3 Years No
ADA 4-5 Years Yes
Linux (Red Hat) 4-5 Years Yes
Domain Knowledge of Air and Missile Defense 4-5 Years Yes
Seeker Programming and/or Integration 4-5 Years Yes
Hardware-in-the-Loop (HWIL) - Unit Under Test Experience 4-5 Years Yes
 
Job Number: DW-1233
Job Location: Grand Prairie, TX
Rate: 90-95/hr max
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer with active secret TX

Description:
Job Title: Embedded Software Engineer
Job Number: 158124/1234
Location: Grand Prairie, TX
Compensation: 98/hr
Assignment Length: 12 month contract
Security Clearance Secret (Prime Contract:, Can start w/o clearance:No, Interim Clearance Sufficient:No)
Exempt
1st shift

Description:


Description
Lockheed Martin Missiles & Fire Control is seeking a qualified Software Engineer to work in the Grand Prairie, TX office. As a Patriot Missile Software Engineer, the ideal candidate will have experience with:

• Embedded programming languages (i.e. C/C++)

• ADA •Navigation states/measurements using Inertial Measurement Units (IMUs)

• Navigation Systems and Related Algorithms (design or implementation experience)

• Three-Loop Autopilot Design/Performance ( implementation experience)

• Field Programmable Gate Arrays (FPGA) [interfacing experience)

• Digital Signal Processors (DSP) (deign or implementation experience)

• Domain Knowledge of Air and Missile Defense

• Active SECRET Clearance is required;

Desired Skills

• Experience with Power-On BIT (PBIT)

• Guidance Algorithms

• Trajectory controls

• Data transmissions

• Seeker Communications

• Universal asynchronous receiver/transmitter (UART)

• Serial Peripheral Interface (SPI)

• Real time operating systems (RTOS)

Real-Time Design Patterns

• Robust Scalable Architecture for Real-Time System development

• Experience with integrating Matlab/Simulink auto generated code into embedded flight code. Will need clearance status on resume. Needs clearance from the start.

Skill/Experience/Education
Mandatory:

The candidate should be a self-starter and possess the following skills:

• Embedded programming languages (i.e. C/C++)

• ADA

•Navigation states/measurements using Inertial Measurement Units (IMUs)

• Navigation Systems and Related Algorithms (design or implementation experience)

• Three-Loop Autopilot Design/Performance ( implementation experience)

• Field Programmable Gate Arrays (FPGA) [interfacing experience)

• Domain Knowledge of Air and Missile Defense

• Active SECRET Clearance is required;

Desired:

Desired Skills

• Experience with Power-On BIT (PBIT)

• Guidance Algorithms

• Trajectory controls

• Data transmissions

• Seeker Communications

• Universal asynchronous receiver/transmitter (UART)

• Serial Peripheral Interface (SPI)

• Real time operating systems (RTOS)

• Real-Time Design Patterns

• Robust Scalable Architecture for Real-Time System development

• Experience with integrating Matlab/Simulink auto generated code into embedded flight code

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
Secret Clearance Required 4-5 Years Yes
BS in Computer Science, Software Engineering, or Related Field 4-5 Years Yes
Embedded programming languages (i.e. C/C++) 4-5 Years Yes
Navigation states/measurements using Inertial Measurement Units (IMUs) 0-3 Years Yes
ADA 0-3 Years Yes
Navigation Systems and Related Algorithms (design or implementation experience) 0-3 Years Yes
Three-Loop Autopilot Design/Performance ( implementation experience) 0-3 Years Yes
Field Programmable Gate Arrays (FPGA) [interfacing experience) 0-3 Years Yes
Domain Knowledge of Air and Missile Defense 4-5 Years Yes
 
Job Number: DW-1234
Job Location: Grand Prairie, TX
Rate: 90-98/hr max
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engine System Design Engineer II

Description:
Engine System Design Engineer II
Canoga Park, CA
1 Year Contract
$23-27.00/Hr


Duties: ** Candidates must be U.S. Citizens **

• Performs entry level design engineering duties for liquid rocket engine systems.
• Primary duties include working within an Integrated Product Team (IPT) environment to design/revise engine system components utilizing 3D CAD software, coordinating analysis support, and releasing drawings/models.
• Additional duties may include in-house/vendor fabrication and test support as needed.

Skills:
• 3D CAD experience required.
• CREO2 is a plus, but not mandatory.

Education:
• Engineering degree required.
 
Job Number: 6895
Job Location: Canoga Park, CA
Rate: 23.00-27.00
Per Diem: Possible Split
Overtime: Possible
Duration: 1 Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engine System Design Engineer II / entry level design engineering duties for liquid rocket engine systems CA URGENT

Description:
Job Title: Engine System Design Engineer II
Job Number: 158170/5832775
Location: Canoga Park, CA
Compensation: 32/hr
Assignment Length: 11 month contract
** Candidates must be U.S. Citizens **
Description:

Performs entry level design engineering duties for liquid rocket engine systems.
Primary duties include working within an Integrated Product Team (IPT) environment to design/revise engine system components utilizing 3D CAD software, coordinating analysis support, and releasing drawings/models.
Additional duties may include in-house/vendor fabrication and test support as needed.
Skills:
3D CAD experience required.
CREO2 is a plus, but not mandatory.
Education:
Engineering degree required.
 
Job Number: MB-5832775
Job Location: Canoga Park, CA
Rate: 32/hr max
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer 3

Description:
responsible for the design maintenance of those products that have been released to Manufacturing for ongoing production and/or production of spares. This shall include customization of that product for specific customer requirements. It shall also encompass responsibility for value engineering, technology insertion and all aspects for sustaining fielded equipment. Design maintenance of released products includes support for production problems, field problems, maintenance of regulatory compliance and customer-driven customization.
The Sustaining Engineer shall coordinate prioritization of major cross-functional issues to support ongoing program needs. The Sustaining Engineer shall establish department technical policies in regard to fielded product surveillance, depot technical operations hardware and/or software development and sustaining tasks.

1.Establishes appropriate links with Manufacturing Engineering and Quality to monitor the production processes and to identify and prioritize the problems that develop in the course of production.
2.Responds in a timely manner to provide assistance in determining design-related causes and assist with design changes as required.
3.Monitors failure data generated in-house and by the customer to ascertain potential requirements for product improvements in future designs.
4.Participates in the Failure Analysis and Correction Teams (FACT) and the Tandem Problem Report (TPR) processes to identify and prioritize customer problems.
5.Develops Engineering Change Proposals (ECP) and company policies for Sustaining Engineering project related programs.
6.Works directly with established customers to maintain processes directly related to their customized products, update the aforementioned processes to meet the changing technical environment of industrial and military requirement.
7.Participates in Value Engineering Teams (VET) for both newly-released and fielded products to identify and prioritize design changes for product enhancement.
8.Interfaces with the companys engineering staff, vendor and customer personnel on program issues of technical concern.
9.Performs hardware and/or software design and development of Depot and Field Test Equipment.
10.Responsible for supervision and technical direction of personnel assigned to sustaining engineering tasks.
11.Performs other duties as assigned by Management.

REQUIRED EXPERIENCE:
Must have 10 years related experience and/or training in aerospace, military, defense and space programs.

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

1. Proven ability to manage technical projects.
2. Knowledge of Navy/Military environmental qualification testing.
3. Knowledge of Mil-Specifications.
4. Excellent communication and technical writing skills.

EDUCATION:
Bachelor's degree in related Engineering field from four-year college or university. BSEE preferred.

WORK HOURS:
9/80, Day Shift
 
Job Number: 161348
Job Location: Anaheim, CA
Rate: $50-60/hr
Per Diem: No
Overtime: Not specified
Duration: 6/+ mo
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: CHIPTON ROSS
Attention: Terry
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer II - Sim & Software

Description:
Engineer II - Sim & Software Engineer
Savannah, GA
48.00-53.00/Hr
Long Term

Contract - Engineer II - Sim & Software Engineer - Req 75962 in GAC Savannah
Recruiter:Erin Redmond
FAA Regulated?: No

Unique Skills:
1. Matlab/Simulink experience 2. Aircraft simulation software experience 3. Experience with high level programming or scripting language such as any of the following: C++, Python, Java 4. Knowledge of software development life cycle 5. Experience in an aircraft lab test environment desired 6. Aircraft Integration and/or HIL experience desired 7. Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.

Education and Experience Requirements:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 18 months related engineering experience with Bachelors degree. Experience credit will be considered for related advance degrees limited to 2 years for Masters Degree and 4 years for PhD in fields applicable to this job position.

Position Purpose:
Performs engineering work related to the investigation and the solution of technical problems associated with research, design, development, service and manufacture of Gulfstream aircraft.

Principal Duties and Responsibilities:

Essential Functions: 1. Solves typical engineering problems within assigned discipline 2. Provides technical assistance to engineering staff and contributes to completion of project milestones 3. Responsible for a complex engineering assignment, or a full project of lesser complexity 4. Follows established schedules while developing plans for engineering assignments 5. Obtains appropriate level of supervisor approvals for work accuracy and adequacy 6. Proficiently applies company/organization policies and procedures

Additional Functions: 1. Actively works to improve daily processes, and ensures all work meets customer requirements 2. Maintains a current and up-to-date knowledge of developments and application of technical principles, theories, and concepts in assigned field of expertise 3. Performs other duties as assigned

Other Requirements: 1. The level of technical skills and abilities appropriate for this grade will be established by each discipline 2. Applies knowledge to provide solutions to a variety of technical problems of moderate scope and complexity, using a combination of judgment with defined practices and procedures 3. Failure to achieve results, or erroneous decisions or recommendations, may cause delays in program schedules and/or allocation of additional resources 4. Ability to convey technical concepts in both written and verbal formats 5. Contacts are primarily within the organization, with occasional customer contacts on routine issues 6. Works under general supervision for routine tasks of minor complexity 7. With supervision/mentorship, can coordinate the activities for lower level engineering staff
Languages Required (in addition to English): No Selection
 
Job Number: 6360
Job Location: Savannah, GA
Rate: 48.00-53.00/Hr
Per Diem: $110/Week/Split
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer III

Description:
JSG is looking for an Engineer III for a 6+ month contract opportunity in Irvine, CA!!!

Job Description:
Researches, analyzes, designs, and tests component parts, processes, or systems to develop new and/or improve core products. Develops and recommends solutions to engineering requirements for complex or specialized projects or systems, to ensure that design objectives are met. Applies engineering principles based on assigned engineering domain (e.g. mechanical; electrical; chemical, etc.).

The ideal candidate will have strong, practical DO-178B development background in safety-critical real-time embedded software.

Will have a principled knowledge of the DO-178B objectives but will be able to apply practical experience to efficiently meet them.

Technically proficient with low-level software (e.g. device drivers, board support packages, built-in test), and will be fully fluent in C and assembly.

Solid understanding of the interaction/interface between software and hardware but will not be required to debug the electronics hardware.

5-7 years of experience in commercial (i.e. non-military) DO-178B programs.

Highly practical & resourceful, and have had a demonstrated experience developing high-performance embedded software for Industrial applications.

Strong familiarity with Linux, and also with real-time operating systems (e.g. QNX Neutrino).

Technically proficient with low-level software (e.g. device drives, board support packages), and will be fully fluent in C and assembly.

Solid understanding of the interaction/interface between software and hardware, and will be able to read schematics.

Education:
Bachelor degree (BS) (or Professional Engineer (PE) certificate) in an engineering or science technical discipline.

Ability to perform the essential functions of the job typically acquired through 4-6 years of related experience.

Knowledge of product area and domain and develops breadth of knowledge of industry practices, techniques, regulations, and policies.

Proficient with engineering design and analysis tools (e.g. computer-aided design or modeling systems); ability to use standard software packages. May require capability using specialized software applications or languages.

Ability to apply standard practices and techniques in specific situations, adjust and correlate data, recognize discrepancies in results, and follow operations through a series of related detailed steps or processes.
 
Job Location: Irvine, CA
Rate: Open
Per Diem: Possible
Duration: 6+ months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Sidney Williams
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Software 3 with active secret OK

Description:
Engineer Software 3 (Job Number: 16019810)

Number of Openings: 1

Location(s): United States-Oklahoma-Oklahoma City


Shift: 1st Shift

Target Start Date: Oct 31, 2016

Rate: $55-$65/hr.

Location: Oklahoma City, OK

Duration: 1 Year (or less if assignment completes early)

Work Week: 9/80a

Clearance: Interim Clearance required

Engineer Software - 3 (3)

Designs, develops, documents, tests and debugs applications software and systems that contain logical and mathematical solutions. Conducts multidisciplinary research and collaborates with equipment designers and/or hardware engineers in the planning, design, development, and utilization of electronic data processing systems for product and commercial software. Determines computer user needs; analyzes system capabilities to resolve problems on program intent, output requirements, input data acquisition, programming techniques and controls; prepares operating instructions; designs and develops compilers and assemblers, utility programs, and operating systems. Ensures software standards are met.


Basic Qualifications:

5 Years with Bachelors in Science; 3 Years with Masters

Experience with real-time, embedded software environment; Hands-on knowledge of Green Hills Integrity Operating System, Board Support Packages and Device Drivers; Multi-Threaded, RTI DDS software expertise are also required. .


Candidate must possess an Interim Secret Clearance prior to start date
 
Job Number: MB-16019810
Job Location: Oklahoma City, OK
Rate: 65/hr max
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Systems Modeling Simulation - 2 TX

Description:
Engineer Systems Modeling Simulation - 2 (Job Number: 16024623)

Number of Openings: 1

Location(s): United States-Texas-Fort Worth


Shift: 1st Shift

Target Start Date: Oct 31, 2016

Rate: $38-$40/hr.

Work Schedule: 9/80A

Location: Fort Worth, TX

Duration: 6 months

The Engineer/Analyst will provide technical support to the customer, Lockheed Martin (LM) F-35 Sustainment organization. This will entail data collection, data analysis, some data modeling and simulation, working with large data sets and databases, and generating summary statistics. The Engineer will often need to support preparation of reports and presentations of technical data and related information. The Engineer will also often participate and support LM customers in meetings with F-35 Joint Program Office government customers.

The Engineer will develop new and/or integrate existing system simulation frameworks, performance models and algorithms, threat models and command and control models and simulate real-time operations and develops software that simulates behavior of systems. The Engineer will develop, integrate and use advanced graphical user interfaces and visualization tools. The employee will also be responsible for modeling operational environments, performing trade studies, performing operational analysis and mission effectiveness analysis, and recommending alternative architectures.

The employee should be able to demonstrate the skill and ability to perform moderately complex professional tasks, and provide solutions to a variety of technical problems of increasing scope and complexity as assigned.

Basic Qualifications:

Must be able to apply Monte Carlo simulation and data mining.
2 Years with Bachelor’s degree in a STEM field; 0 Years with Master’s degree in a STEM field.
Experience with Microsoft Office suite, especially Excel and PowerPoint, and simulation and modeling tools.


Preferred Qualifications:

Experience with VBA Excel macros, GUI and S/W development, SQL and Access
 
Job Number: MB-16024623
Job Location: Fort Worth, TX
Rate: 40/hr max
Duration: 6 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
F-15 Customer Training Specialist (MO)

Description:
ACTIVE SECRET CLEARANCE REQUIRED TO START.

Conducts analyses to evaluate customer technical training needs to determine appropriate training content, objectives and design. Develops, conducts and evaluates effectiveness of technical training. Uses specialized software technology to research, configure, maintain, update and develop new and existing media and materials. Gathers data to support complete proposal development activities.

F-15SA Intermediate Level Avionics Maintenance Support System (AMSS) Instructor

Develops and delivers customer training for F-15SA (Saudi) Intermediate Level Avionics Maintenance Support System (AMSS) trainees in classrooms, and with actual hardware. Analyzes training equipment needs, develops course materials, conducts classes, and evaluates and modifies course content and training methods for specialized training environments. Prepares courses, including specialized course materials that reflect customers' unique configurations by investigating and analyzing engineering documents, specifications, drawings, and changes. Performs task analysis; develops curriculum materials, manuals, and computer-based training. Teams with instructional designers, developers, and training staff to assemble training products. Conducts customer training events and analyzes training evaluation data within the avionics specialty. Serves as focal for training program development and training conduct in this specialty. Assesses participant learning and adjusts presentation to ensure successful understanding by all students. Uses current teaching techniques, advanced presentation skills and instructional methods; to include computer based training (CBT) and Instructor led training.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required.
Basic Qualifications
• Recent military AMSS operation and maintenance experience in the F-15E, F-15SG, or F-15SA.
• Military Instructor experience
• Training courseware development experience with platform instructional experience
• Experience developing and delivering maintenance training on F-15 systems
• Experience with Microsoft Word, Power Point, Outlook and Excel

Preferred Qualifications
• Experience with MIL-SPEC or an ISD approach to training materials development.

Bachelor's and typically 6 or more years’ related work experience, a Master’s degree and typically 4 or more years’ related work experience or an equivalent combination of education and experience.

Assignment is for a F-15SA Intermediate Level Avionics Maintenance Support System (AMSS) Instructor in Saudi Arabia for 9 months with possible extension to 12 months.
 
Job Number: F15CustMO
Job Location: St. Louis, MO
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 9-12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FMS Test Engineer

Description:
POSITION ROLES AND RESPONSIBILITIES
Sikorsky Aircraft is seeking candidates to support the Black Hawk helicopter program in the area of Avionics system integration. Primary technical responsibilities will be development and execution of automated and manual software test procedures of avionics systems including controls and displays, communication systems, navigation systems, and mission avionics systems for HH-60W/UH-60M/S-70i/S-70M aircraft.

2-5+ years experience in developing and conducting formal requirements based testing of complex hardware / software systems is required. The candidate should be experienced in the use of digital bus analyzers, simulation techniques, and test automation techniques. Familiarity with the Black Hawk avionics and aircraft systems is desired. Knowledge of modern avionics architectures, components and system and software engineering processes is preferred.

EDUCATION
Bachelor of Science
 
Job Number: 16-512-28077
Job Location: Northeast
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Financial Support - Level 4

Description:
Financial Support - Level 4

Location: Sacramento, CA
Duration: 6 month contract
Pay Rate: $20/hr - $29.28/hr (DOE)
*Must be a U.S. citizen*

Duties:
-Perform general and specialized financial activities in support of various Division operations.
-Under minimal direction performs complex support tasks where considerable judgment and initiative are required in resolving problems and making recommendations.
1. Performs financial support in areas of accounts payable
2. Maintains, reviews and corrects accounting records, systems data and workflow
3. Analyzes and reconciles various financial reports requiring interpretation of data
4. May provide work leadership and direction to less senior financial personnel
5. Performs administrative duties as required.

Skills:
1. Ability to interpret and follow verbal and written instructions
2. Ability to communicate effectively, both verbally and in writing
3. Ability to operate standard office equipment
4. Interpersonal skills to effectively interface with all levels of personnel and work in a team environment
5. Knowledge of policies, practices and procedures in area of assignment
6. May require the use of various computer systems for data collection
7. May require competency in one or more computer software packages used in area of assignment
8. May require knowledge of applicable regulations in area of assignment
9. Must have thorough knowledge of practices and procedures in Accounts Payable transactions
10. Must be able to execute a complex sequence of operations in an established field under continually changing conditions requiring independent action.

Education:
Typically requires a high school education or equivalent and 7-9 years of directly related financial/cost accounting experience.
 
Job Number: 6937
Job Location: Sacramento, CA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
Flight Test Engineer
Menominee, MI
12+ month contract

Open to Entry Level AND Sr. level candidates!

POSITION RESPONSIBILITIES


This individual will work in the Experimental Engineering department and will be responsible for conducting R&D and certification ground/flight tests. The candidate will be responsible for test preparation, planning instrumentation installations, instrumentation and equipment calibration, programming data acquisition software, data reduction, and test reporting. He/she will assist in test conformities and TIA preparation, participate in FAA certification projects, support safety of flight briefings, and assist other Engineering Groups on an “as needed/as available” basis depending upon his/her other skills and abilities.


Duties include but are not limited to the following:

This individual will be responsible for R&D and certification ground/flight tests, including:
•Reviewing proposed projects and developing compliance and test matrices
•Planning, writing, and/or reviewing test plans and reports
•Programming data acquisition software
•Data reduction
•Planning aircraft flight and ground test instrumentation installations
•Instrumentation and equipment calibration
•Conducting weight and balance and maintaining records
•Conducting ground/flight tests, including pilot coordination and pre/post flight briefings as required
•Coordination and preparation of test conformities and TIA activities




REQUIRED KNOWLEDGE, SKILLS AND ABILITIES
•Minimum of a Bachelor’s of Science degree in Aerospace Engineering, Engineering Physics, or related field.
•An understanding of aircraft structure and systems, rotorcraft dynamics, aerodynamics, and powerplant.
•An understanding of FAA rules, regulations, and certification processes.
•An understanding of and ability to write test practices and procedures.
•Experience with strain gauges, instrumentation, and wiring.
•Intermediate understanding of data acquisition software (LabView and/or Matlab preferred).
•Advanced computer skills (MS Word, Excel, PowerPoint, Project).
•Superior problem solving skills.
•Superior communication skills (verbal and written).
•An ability to work multiple projects and multi-task.
•Proven organizational skills.
•Works with minimal supervision
•Ability to work within a team
The following are desirable, but not required:

•FAA A&P License
•FAA Pilot License
•Understanding of Microsoft Access
•Basic design skills (SolidWorks, CADKey)
 
Job Number: 51046
Job Location: Menominee, MI
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12+ months
Start Date: 1/23/16
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
DUTIES:

� Develop System Test Plans, execute simulator and system flight tests, and document test results. This includes determining, communicating, and documenting flight test objectives, and developing test cards accordingly.
� Participate in flight readiness reviews, test event briefs, and post-test debriefs with UAV Operators and Observers.
� Coordinate the use of test ranges with UAV Operators and Observers.
� Ensure test assets are prepared to support testing, including checking that product hardware and software are properly configured, test cards and procedures are written, equipment is operational, batteries are charged, etc.
� Participate in test activities, fill in test data sheets, and transfer telemetry files to the network.
� Debrief engineering and management team on results of flight and simulator tests.
� Capture test failure details in defect reports, using an issue tracking system, like Bugzilla or JIRA.
� Position may require up to 25% travel.

QUALIFICATIONS:
� Bachelor�s Degree (strongly preferred) from an accredited University in Electrical Engineering, Software Engineering, Aerospace Engineering, or a related discipline.
� 7+ years of experience in multiple engineering projects including research and development efforts, with a focus on unmanned aircraft systems, simulation, integration, and test. Demonstrated ability to successfully contribute to successful short term projects (3 � 9 months).
� Familiarity with unmanned aircraft systems, including avionics, power, and Ground Control Stations (GCS�s).
� Minimum 3 years of experience conducting system tests or flight tests.
� Ability to develop ad hoc tests to troubleshoot test failures.
� Ability to analyze test data using software tools like MATLAB or Excel.
� Desired hands on lab experience in test engineering, including use of test and measurement equipment.
� Strong computer skills including Microsoft Office, engineering analysis tools (e.g., MATLAB, Simulink), and software development environments (e.g., Visual Studio).
 
Job Location: Simi Valley, CA
Rate: Open
Duration: 6 months potential to be Permanent
Start Date: Immediate
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Sidney Williams
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Graphics Designers - Melbourne, FL

Description:
STS AeroStaff Services is currently hiring Graphic Designers for open positions in Melbourne, Florida.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Purpose:

Assist with development and implementation of graphic materials for the worldwide marketing and sales teams. Interface with external creative agencies and graphics department as required. Ensure consistent corporate branding and product image quality.

Job Duties:

• Assist in development and implementation of worldwide graphic design strategies in conjunction with creative agencies to promote the client’s brand.
• Plan creative concepts by gathering information and materials.
• Manage digital assets: images touch up and post-processing, naming convention, managing the library (upload new assets, remove outdated ones, etc)
• Provide creative direction and best practices advice on design layout and project’s technical specifications.
• Ensures brand identity guidelines are being followed consistently worldwide.
• Create and implement worldwide graphic marketing materials and presentations in both print and digital formats, including website graphics, print ads, email campaigns, signage, trade-show displays, invitations, photographs, videos and digital kiosks.
• Create, update and enhance graphical depictions of aircraft performance, range maps, charts, etc. to promote the client brand.
• Create, update and enhance presentations for the worldwide sales and marketing team.
• Partners with other internal departments and third-party vendors for all creative and production needs.
• Interface with Authorized Sales Representative (ASRs) and other departments to ensure any outside graphic development maintain client’s global branding guidelines.

Qualifications:

• BA or BFA Degree majoring in Graphic Design, with a concentration on web design fundamentals.
• Minimum 1-5 years’ experience in graphic design and front-end web design required.
• Fundamental understanding of visual design methods, philosophies and techniques
• Experience with luxury products or similar services.
• Aviation or Yachting experience preferred but not required.
• Solid, well-organized portfolio of previous and recent work.

Requirements:

• Essential competency using most current versions of design software: InDesign, Photoshop, Illustrator (Adobe CS6 or Creative Cloud).
• Working competency with HTML, CSS and other web graphic standards.
• Good understanding of typography methods and applications.
• Adobe After Effects, Premiere and Flash experience will be helpful, but not required.
• Javascript or other software programming skills will be helpful, but not required.
• Any 3D software skills and experience will be helpful, but not required.
• Proficient in PowerPoint, Word and Excel.
• Excellent skills with Photoshop, Illustrator and other graphic and layout software.
• Good written and verbal communication skills.
• Relevant experience with Digital Asset Management practices.
• Competency of photography skills and practices preferred but not required.
• Excellent organizational and interpersonal skills.
• Self-starter.
• Ability to travel domestically and internationally to support the marketing and sales departments. 10%-15% travel may be required.
• Commitment to company values and compliance with department norms, policies, directives, and procedures.
• Incorporates Lean and P3E processes and concepts into daily activities.
• Strives for continuous improvement to processes and procedures.
• Honors and protects confidential and proprietary documents and information.
• Satisfies work schedule requirements.

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 30352
Job Location: Melbourne, FL
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Guidance, Nav and Control Engineer with active secret TX

Description:
Job Title: Guidance, Nav and Control Engineer
Job Number: 154610/1075
Location: Grand Prairie, TX
Compensation: 94/hr
Assignment Length: 5 month contract
Secret Clearance
Exempt

Description:

Responsible for algorithm development tasks for a guided bomb program. The engineer will develop GNC algorithms and perform analyses using a 6-DOF simulation. The engineer will support integration of the algorithms into flight software and integration of the simulation with Hardware-In-The-Loop. Flight test support, system calibration, and hardware/software integration issue resolution will also be required.

Skill/Experience/Education
Mandatory:

Matlab and Simulink simulation experience
Desired:

Hardware and software test experience
C/C++ programming experience
Familiar with Linux operating system

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
GNC algorithms Design and tune autopilots, guidance laws and navigation filters for guided weapons 4-5 Years Yes
Hardware/software integration 4-5 Years Yes
 
Job Number: DW-1075
Job Location: Grand Prairie, TX
Rate: 74-94/hr
Duration: 5 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Guidance, Navigation and Control Engineer TX

Description:
Job Title: Guidance, Nav & Ctrl Eng
Location: GRAND PRAIRIE, TX
Compensation: DOE
Assignment Length: 6 Months
Non-Exempt
9/80-A
Secret (Prime Contract:JSF, Can start w/o clearance:Yes, Interim Clearance Sufficient:Yes)

Description:
• Radar Signal Processing engineer needed for fire control radar development program.
• Responsibilities will include defining waveforms, performing trade studies, defining radar signal processing requirements, testing signal processing software, supporting hardware and software integration, and interfacing with transmitter and receiver suppliers.

Skill/Experience/Education
Mandatory:

Experience with radar signal processing algorithms, including MTI, PRI selection, acquisition and track logic, and pulse compression

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
RF signal processing algorithms Waveform design and algorithm development 4-5 Years Yes
Simulation experience Digital simulation of radar system performance including signal processing algorithms 0-3 Years No
 
Job Number: JM - 1160
Job Location: Grand Prairie, TX
Rate: DOE
Duration: 6 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jaqueline Martinez
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Human Factors Engineer

Description:
Human Factors Engineer

Location: Savannah, GA
Rate: $70.00 - $80.00/HR
Long Term contract


Unique Skills:
- Provides guidelines in application of Human Factors (HF) requirements to equipment design during all stages of the design process, from concept definition through detailed design.
- Applies structured quantitative or subjective methods to generate HF requirements and ensures human centered design and optimum usability in the operation, maintainability, and/or manufacturing of aircraft systems.
- Leads and/or performs structured test plan development and analysis of full and part task simulations using prototyping tools to obtain early, multiple user feedback for HF requirement definition.
- Provides analysis of detailed design concepts to functional teams through the use of modeling techniques for reach and force requirements for a wide anthropometric range of individuals of a targeted population.
- Holds multidisciplinary review meetings as needed to clarify analysis goals.
- Creates specific project milestones that can be integrated in the overall group product plan and schedule.
- Creates and supervises pilot workload assessments through measurement techniques such as rating scales, questionnaires, and flight technical error analysis.
- Generates estimates of procedural human error using task analysis and human error analysis methods.
- Collaborates on the coordination and development of facilities and/or technology to support simulation testing.
- Creates flight test plans and reports, engineering reports and/or memos to substantiate compliance with human factors certification regulations
- Develops trade studies on system design concepts and presents human factors recommendations to multidisciplinary design teams and upper management.
- Minimum a Bachelor degree (a Master degree is preferred) in a related area (e.g. Human Factors Engineering, Human Factors Psychology, Industrial Engineering, Human Computer Interaction, Aerospace Engineering) or equivalent combination of appropriate education experience
- Minimum of ten years in Human Factors, or fifteen years with exceptional broad qualification in several related disciplines (aviation/aerospace experience is preferred)
- Experience with simulation software is an advantage (e.g. CATIA V5 Human Builder, 3DSSPP, iData)
- Experience with requirements management tools is an advantage (e.g. DOORS)
- Flying experience is an advantage (e.g. PPL, CPL, ATP)


Education and Experience Requirements:
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


Position Purpose:

Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Principal Duties and Responsibilities:

Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 2. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 6906
Job Location: Savannah, GA
Rate: $70-$80
Per Diem: Yes
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ITC Analyst - RM

Description:
Johnson Service Group is looking for an ITC Professional for our client.

This is a 1.6 year contract located in Stratford, CT.

Job Description

The primary responsibility of this role will be to perform Jurisdiction and Classification (J&C) in client�s PLM systems in accordance with the ITAR and/or EAR of Hardware, Tech Data, Software and Defense Services. Interact Daily with Engineering, Operations, Purchasing and SAS to address J&C items.

Mandatory Skills
� Employee must have technical/engineering experience (Avionics, Electrical, Propulsion, Chemical Airframe, Publications, Training)
� Employee must have export compliance (ITAR\EAR) experience
� Employee must be adept in navigating through the MS Office Suite and must be able to handle a high volume of requests efficiently to meet internal customer demands.

Nice to Have Skills
� Knowledge of client's MATRIX-ONE, ERC Engineering Drawings and Specifications
� Knowledge of typical business processes (i.e. procurement, proposal preparation, program management, etc.) and production support would be helpful
 
Job Number: 352699
Job Location: Stratford, CT
Rate: Open
Per Diem: yes
Overtime: yes
Duration: 18 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Richard Martinsen
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ITC Professional

Description:
POSITION ROLES AND RESPONSIBILITIES
The primary responsibility of this role will be to perform Jurisdiction and Classification (J&C) in Sikorskys PLM systems in accordance with the ITAR and/or EAR of Hardware, Tech Data, Software and Defense Services. Interact Daily with Engineering, Operations, Purchasing and SAS to address J&C items. Mandatory Skills:
Employee must have technical/engineering experience (Avionics, Electrical, Propulsion, Chemical Airframe, Publications, and Training)
Employee must have export compliance (ITAR\EAR) experience
Employee must be adept in navigating through the MS Office Suite and must be able to handle a high volume of requests efficiently to meet internal customer demands.
Nice to Have Skills:
Knowledge of Sikorsky's MATRIX-ONE, ERC Engineering Drawings and Specifications
Knowledge of typical business processes (i.e. procurement, proposal preparation, program management, etc.) and production support would be helpful
Skills Required:
Employee must have technical/engineering experience
Knowledge in the area of export compliance a plus.
Knowledge of Sikorsky's MATRIX-ONE, Electronic Record Center (ERC), Engineering Drawings and Specifications would be beneficial.
Employee must be adept in navigating through the MS Office Suite and must be able to handle a high volume of requests efficiently to meet internal customer demands.
Knowledge of typical business processes (i.e. procurement, proposal preparation, program management, etc.) and production support would be helpful.

EDUCATION
Bachelor of Science
 
Job Number: 16-513-27891
Job Location: Northeast
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer III

Description:
OCCUPATIONAL SUMMARY
Provide support to leads and operators in the assembly and/or fabrication areas. Provide information and support for process improvement. Plan, structure and implement manufacturing programs.
Support manufacturing assembly and fabrication to trouble shoot both assembly and fabrication problems. This requires close interaction with assembly personnel, fabrication personnel, and their supervision. Must support all lean manufacturing improvements and may require participation in lean improvement activities. Must also work closely with Quality Assurance, Program Management, Engineering, and shop Managers to resolve quality issues, increase productivity, and eliminate ergonomic problems.

AN INDUSTRIAL ENGINEER III MUST EXHIBIT THE FOLLOWING CHARACTERISTICS
A documented history of supporting manufacturing fabrication and assembly departments in identifying and resolving production problems and issues.
Demonstrates the ability to facilitate continuous improvement in the production process.
Must be experienced in interacting closely with personnel at all levels of the manufacturing system, including supervision and management.
Must be able to assume a leadership position in regard to Lean Manufacturing improvement projects, and exhibit a record of actively supporting past projects.
Must be capable of interacting regularly and cooperatively with Quality Assurance, Program Management, Engineering, and Production Management to resolve quality, productivity, ergonomic and safety issues.
Must be capable of initiating improvement projects resulting in labor, material, space, manpower, and/or other measurable cost reductions.
Must have a working knowledge of current 6S factory practices
Should be familiar with company policies regarding worker safety and have demonstrated the ability to identify and resolve safety issues in the workplace.
Knowledgeable of Life Safety Code as it applies to manufacturing layouts.
Must have demonstrated above average capability for developing engineering analysis.
Must have knowledge of basic material handling principles and products
Must be capable of developing special projects that are reviewed at the Zodiac level.
Uses statistics as a normal tool for resolving issues.
Leads or assists process improvement teams.

DUTIES AND RESPONSIBILITIES
Provide support to leads and operators in the assembly and fabrication areas.
Analyze parts and seat flow.
Conducts labor and machine time studies, operator work and motion studies, material and work flow studies in order to suggest and implement more economical and efficient manufacturing practices. Uses gathered data to establish and publish Standard Labor and Machine Data, and to calculate manpower and machine requirements.
Balance the lines or cells and implement procedures and/or operator instructions to support process improvement.
Participate to the implementation of structure and plan manufacturing programs (Lean Manufacturing, Set-up Reduction, 6S, Cost Reduction).
Apply statistical data analysis in normal duty activities.
Measures, analyzes, and adjusts Factory Floor Layout to achieve optimum manufacturing productivity as directed by Lean Manufacturing practices, subject to managerial approval.
Design of major layouts with product flow, material handling considerations, and infrastructure provisions.
Creates and documents Standard Work Instructions for use by factory personnel, in compliance with design and quality specifications and FAA directives
Participates in training shop personnel in new and/or updated processes, including Lean Manufacturing practices and improvement implementations.
Introduces new production processes and equipment.
Participate on concurrent engineering teams and verify adequacy/optimization of design in regard to weight and cost restrictions.
Collaborates with engineering design personnel to influence product design and thus provides for good production methods and economical tooling.
Analyzes engineering design documents, prototypes and/or engineering change orders and determines if an assembly or fabricated part can be manufactured. Communicates back to engineering and/or R&D to discuss needed changes.
Reviews and approves new and revised engineering drawings through the drawing release system.
Reviews changes in engineering design, planning, tooling, and NC programming to determine impact on current processes, methods and work instructions. Follows through with updating standard data and standard work instructions per such changes.
Investigates serious or recurrent production difficulties and delays due to such factors as faulty methods, tooling, operational sequences, or inadequate facilities or layouts.
Frequently contacts supervisory and non-supervisory personnel in engineering, production planning, tool design and other departments for the purpose of discussing production problems in order to secure necessary information or consider factors which may interfere with the effectiveness of production. Takes preventive or corrective action to remedy the problem or refer it to others who may be more directly responsible.
Develops new ideas and methods, and recommends changes in existing tooling to secure the most economical production. Submits cost reduction ideas.
Continuously analyzes current processes, tooling and methods in the factory for labor and/or cost reduction opportunities. Documents such opportunities and submits suggestions for managerial approval. Implements all approved suggestions. Investigates new manufacturing processes and plans implementation, including acquisition of new equipment and/or facilities.
Completes all assignments aimed at determining optimal methods and processes for manufacturing designated company products.
Establishes and maintains interaction with outside vendors with a view to improvement opportunities relating to equipment and processes. Makes investigative visits to such vendors when required.
Cooperates with Safety and Health personnel to optimize factory safety conditions, and with Energy personnel to monitor and optimize energy and fuel usage within the facility.
Manages significant cost capital projects including identification of equipment, justification of capital, and ensures schedule and installation is per plan.
Uses published Master Schedule and Production Requirements data to develop manufacturing capacity analyses for all of the manufacturing departments and work centers involved in meeting the Production Plan. Regular electronic reports will be presented to upper management for determining actions for solving any capacity issues.
Prepares regular Manpower reports to relay information regarding manufacturing departments or work centers that are in need of employee and/or equipment adjustments.
Prepares Manpower/Capacity/Forecast reports for aircraft manufacturers (i.e. Boeing, Airbus, etc.) to relay the companys production capability to manage future commitments.
Maintains a current electronic listing of all active manufacturing work centers.
Makes regular oral and written reports and/or presentations to supervisory and managerial personnel on any of the above activities.

QUALIFICATION REQUIREMENTS
KNOWLEDGE AND SKILLS
Requires sufficient training to permit ready comprehension of problems having to do with production methods and facilities.
Must be capable of preparing well-written and orderly reports.
Must have sufficient knowledge of manufacturing and related operations with detailed knowledge of such fields as product design, engineering function, tool design, tool fabrication, space layout, handling equipment, production machinery and equipment, NC machinery and equipment, factory methods work, etc.
Must have knowledge of trigonometry, algebra and statistics.
Must be proficient in inventory management, product data management, monitoring production control and cost, and in manufacturing resource planning.
Strong knowledge of motion and time study principles
Knowledge and experience in Lean Manufacturing.
Strong PC skills, knowledge of all Microsoft software
Able to lead teams of people towards focused and defined objectives
Strong Working knowledge of AutoCad
Strong knowledge of motion and time study principles

EDUCATION AND/OR EXPERIENCE
MUST HAVE ONE OF THE FOLLOWING
Must have a B.S degree in a related technical field (e.g.: IE, ME, EE) or an Associate degree with 3 years related experience or 6 years of job related experience.
Additionally 12 years of manufacturing/industrial engineering experience.
State registered professional engineers license in BSME, BSMfgE, BSEE, or BSIE and twelve (12) years of manufacturing experience.

COMMUNICATION SKILLS
Strong leadership and communication skills. Ability to communicate with all levels of management, peers, operators and customers. Must have the ability to generate written communication and to operate required office equipment. Must be able to read and review written communication. Speech and hearing abilities that allow individual to communicate clearly and distinctly in English.
Must be capable of communicating electronically via email. Must have working knowledge of Excel, Word, PowerPoint and other applicable computer softwares.

REASONING ABILITY
Ability to think strategically and resolve problems. Must be able to make decisions. Must be able to interface with other departments and vendors.

PHYSICAL DEMANDS
This position requires extended periods of sitting while working with computers and viewing computer monitors, and other office equipment. Finger dexterity needed in using misc. office equipment such as telephone, typing, ten key, fax, copy machine etc. Bending, stooping, reaching and lifting up to approximately twenty pounds are required during tasks related to the job.

Listed above are the ESSENTIAL FUNCTIONS of this job classification. Employees in this job classification may be required to perform various other duties including but not limited to training, administration, and housekeeping. In addition, employees in this job classification are responsible for the quality, quantity and timeliness of the product or service they provide. They will carry out those duties, in a safe and cooperative manner, per established policies, practices and procedures. Management reserves the right to add, modify, change or rescind the work assignments of different positions and to make reasonable accommodations so that qualified employees can perform the essential functions of the job.
 
Job Number: 16-611-7927
Job Location: South-central
Rate: $70K to $90K
Per Diem: No
Overtime: Possible
Duration: DIRECT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Integration and Test Engineer - Level 2

Description:
Integration and Test Engineer - Level 2

Location: Orlando, FL
Pay Rate: $45/hr (DOE)
Duration: 1 Year Contract
Shift: First, 9/80
Secret Clearance: (Prime Contract: Can start w/o clearance: Yes; Interim Clearance Sufficient: Yes)

*Must be a U.S. citizen*

Job Description:
-Designs, develops, and implements integration and testing methods and equipment.
-Plans and arranges the labor, schedules, and equipment required for testing and evaluating standard and special devices.
-Provides test area with parameters for sample testing and specifies tests to be performed.
-Compiles data and defines changes required in testing equipment, testing procedures, manufacturing processes, or new testing requirements.
-Responsible for testing all customer samples and for special tests that cannot be performed in the test area.


Mandatory Skills:
-A multifaceted Systems Test Engineer to provide support for the Javelin Spiral 3 seeker Design Verification Testing and qualification.
-This position will require the candidate to:
1) assess system requirements for the purpose of designing and drafting test plans and procedures;
2) manage acquisition and preparation of test articles;
3) coordinate and manage execution of the development and test activities;
4) gather and analyze environmental and EO test data for the purpose of quantifying performance against requirements.
-REQUIRES A LOT OF EXPERIENCE WITH ELECTRO-OPTICS REQUIREMENTS INTERPRETATION, INTEGRATION & TEST OPERATIONS MANDATORY.
-Systems Engineer - Requires a Bachelor's degree, or higher, in Electrical Engineering, Physics, or Mathematics with a keen interest in weapon system development.
-Proficiency in programming languages such as C and C++ is desired.
-Strong background in mathematics and proficiency in MATLAB or a related simulation tool is essential.
-Course work or related experience in integration and testing of hardware and or software components highly beneficial.


Desired Skills:
-System Requirements
-Electro-Optics: requirements interpretation, integration, & test operations is preferred
 
Job Number: 6874
Job Location: Orlando, FL
Rate: 45.00
Per Diem: Possible
Overtime: No
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Lead Drainage Engineer

Description:
Job Location:Fort Lauderdale, Florida, United States
Position Type: Full-Time/Regular

Job Responsibilities:

Coordinate with other team members on execution and control on transportation projects to achieve continuity of purpose within scope, budget, and schedules from project pursuit through final design

Serve as the lead drainage technical liaison with clients on project efforts
Participate in oral presentations, prepare technical proposals, scope of services, staff hour estimate, and assist with negotiations
Perform hydrology/hydraulic analysis for the design and construction of transportation and flood control projects
Evaluate existing site conditions and prepare innovative cost effective drainage concepts or design solutions
Be responsible for drainage design, including but not limited to, the design of storm sewers systems, cross drains, bridge deck drainage, roadside ditches, treatment and attenuation ponds, spread and scour analysis, and preparation of BHRs
Coordinate efforts of assigned design team to ensure completeness and accuracy of design effort
Required Skills

Ability to participate as a team player and work with other Departments within the organization
Proficient in Microstation and Geopak
Excellence in written and verbal communication
Experience with FDOT and Florida Water Management District drainage design and permitting criteria
Proficient with ASAD or Geopak drainage and AdICPR software
Required Experience

BS in Engineering
Florida PE license or the ability to obtain within 4 months
Minimum of 3 years of experience preparing drainage design for Florida Department of Transportation (FDOT) projects
Experience permitting drainage design projects with Florida Water Management Districts


Working Conditions:
Work is performed within a general office environment 95% of the time. Work is generally sedentary in nature, but may require occasional standing and walking. Lighting and temperature are adequate and there are no hazardous or unpleasant conditions caused by noise, dust, etc. within the office environment.



Field work is required on occasion where work may be conducted outside in heat/cold, wet/humid, and dry/arid conditions. Some lifting (up to 25 lbs) may be required as needed.



Job Competencies:

Attention-to-detail
Analytical Thinking/Problem Solving
Communication
Job Proficiency
Creativity and Innovation
Customer Focus
Dependability
Job-Focused Learning
Planning and Organizing/Time Management
Results-oriented


Organizational Competencies:

Building Relationships & Teamwork
Integrity & Ethics
Quality Service
Safety


EOE: M/F/Vet/Disability.
 
Job Number: CR358659
Job Location: Fort Lauderdale, FL
Duration: LT/ Perm
Input Date: 11/14/2020
Firm Name: CDI CORPORATION
Attention: Cindy Rankin
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Logistics Specialist

Description:
* Really need candidates with a strong technical background in logistics analysis and a demonstrated ability to autonomously manage small teams and projects.
* Need someone who’s up-to-speed with Government Acquisition Programs & Technical Manual Software
* The Senior Logistics Specialist will take on more of a leadership role; looking for someone who’s managed or supervised others (3 – 20 employees)


Looking for a Mid-Level Logistics Specialists (8+ years) and a Senior Logistics Specialists (15+ years) to support a federal contract portfolio. The Logistics Specialists will technically support and oversee various Integrated Logistics Support (ILS) efforts within the company, specifically for Department of Defense (DOD) and Department of Homeland Security (DHS) equipment acquisition programs and projects. They will utilize their logistics expertise to plan, coordinate, execute, and manager complex logistics analysis projects while directing and mentoring junior level logisticians. Projects will involve the development, assessment, and management of maintenance planning, technical data, manpower/personnel, computer resources support, supply support, facilities, support equipment, training and support, and PHS&T. The Logistics Specialists are expected to communicate effectively with executive staff, the internal and external contractor technical teams, and the various Government and private company customers.

Job Duties:

The Logistics Specialists will be responsible for the integration of Reliability, Maintainability, Supportability and Sustainment activities for DOD and DHS programs. These positions require a thorough working knowledge with and experience in ensuring all logistics elements are addressed and sustained throughout the acquisition and sustainment processes. Key technical tasking includes:
> Failure Modes Effects and Criticality Analysis (FMECA)
> Fault Tree Analysis (FTAs)
> Maintenance Tree Analysis (MTAs)
> Level of Repair Analysis (LORA)
> Reliability Center Maintenance Analysis (RCM)
> Provisioning analysis and documentation
> Manpower, Personnel Integration (MANPRINT) analysis
> Technical publication development

In support of these tasks, the Logistics Specialists will lead, manage, and represent all logistics elements at all Integrated Process Teams (IPTs) and customer reviews for their programs. The Specialist will serve as the primary customer point of contact for logistics program activities, leading program review sessions with customers to discuss cost, schedule, and technical performance.

Further responsibilities for both the Senior Logistics Specialists include:
> General support for Human Systems Interface (HSI) tasking
> General support for training development to include new equipment training, maintainer training, and interactive multimedia instruction products
> Technical support for Federal Government proposal development

Qualifications:

 Education:
o Bachelors of Arts Degree (minimum); Bachelors of Science Degree in Engineering or Business (preferred). Defense Acquisition University training in Acquisition and Logistics (a plus). Significant professional experience in logistics may be considered in lieu of a Bachelor’s Degree
 Experience (Mid/Senior):
o 10/15 years of professional experience showing progressive growth in skills and responsibility with a minimum of 6/10 years in DoD/DHS related integrated logistics support planning and analysis.
 Skills:
o Deeply experienced in conducting various logistics analyses (maintenance analyses, provisioning analyses, reliability analyses, safety analyses, MANPRINT analyses, and life cycle cost analyses), collecting and reporting LSA data, managing reliability growth programs, developing and verifying technical manuals, developing new equipment training curriculums, documenting packaging requirements, and developing supportability and life cycle support plans.
 Technical Skills:
o Demonstrated capability in the development and maintenance of Logistics Management Information (LMI) and Supportability Analysis Summaries (SAS) in accordance with MIL-STD-1388-2B, MIL-PRF-49506 and GEIA-STD-0007
o Demonstrated capability in utilizing POWERLOG, COMPASS, CASA, and NSN search tools
o Demonstrated capability in the development of Logistics Support Plans, development of Maintenance Plans, and conduct of various logistics analyses (as identified in the “Job Duties” section above)
o Demonstrated capability in the development of Provisioning Parts Lists (PPLs) and Design Change Notice (DCN) data using PowerLog-J and MS Excel .csv file formats
o Demonstrated experience in managing and supporting technical manual validation and verification processes.
o Demonstrated experience in working with and manipulating software databases to create additional software models for task analysis simplicity


Mark A Ludwig
Senior Sales / Account Executive
Global American Staffing
Email: mludwig@globalams.us
Direct: (508) 434 – 6180
Office: (508) 230 – 5030 x123
www.globalamericanstaffing.com
 
Job Number: 056_2016
Job Location: Edgewood, MD
Rate: DOE
Per Diem: SPLIT POSSIBLE
Overtime: YES
Duration: Temp-to-Perm
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark A Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer

Manufacturing Engineer must have experience with aircraft major structural assemblies/installations. Experience with Soloumina, Smarteam, Catia V5 preferred.
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning).

Principal Duties and Responsibilities:

Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 9. Utilize CADAM/CATIA data and nesting software to generate flat patterns, Master Models, NC data, and ply nests to meet Engineering and Manufacturing requirements. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. 3. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
Education and Experience Requirements:
Bachelors degree in Mechanical, Manufacturing Engineering or related curriculum, or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Three (3) years Manufacturing Engineering, planning, or related technical experience.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer - Level 3

Description:
Manufacturing Engineer - Level 3

Location: Clearwater/Pinellas Park/Oldsmar, FL
Duration: 1 Year Contract
Pay Rate: $35/hr - $45/hr (DOE)
Shift: 2nd, 9/80 ; Overtime: Yes
*Must be a U.S. citizen* *No clearance needed*

Job Description:
-Provide manufacturing engineering support to the build of circuit card assemblies as a contributing member of an integrated product team (IPT).
-Provide day-to-day support to manufacturing operations to ensure quality, cost and schedule goals are met; Investigate, communicate, and solve design, producibility, and process related assembly issues as required.
-Define optimal material and product flow within the production work cell, taking into consideration the unique requirements of each customer.
-Generate and maintain detailed assembly work instructions including narrative, diagrams, photographs, attachments, and linked documents.
-Support the design change management activities of the IPT.
- Analyze process defect data and trends and help define and implement corrective actions.
-Perform and communicate non-recurring engineering activities during production start-up, which includes tooling and fixture design, development of machine automation programs, and configuration of the manufacturing bill of materials for manufacturability.
-Interface with technical counterparts in other organizations both within and outside Clearwater Operations.

Mandatory Skills:
• IPC-A-610 training or J-STD-001 (MANDATORY)
• Minimum 5 years manufacturing engineering experience in a technical role supporting the design and manufacturing of circuit card assemblies within an Integrated Product Team type of work environment.
• Skill with surface mount technology and automated SMT build equipment.
• Strong interpersonal skills and demonstrated ability to work with coworkers and others from diverse backgrounds.
• Proven ability to effectively communicate through written and oral means, and to multitask by handling multiple assignments in parallel.
• Willingness to work overtime and during off-days occasionally as required to support production operations.

Desired Skills:
• Bachelor’s degree from an accredited University in Engineering.
• Experience or training with advanced manufacturing technology and automated equipment applications, particularly as it relates to circuit card assembly manufacturing; understanding of lean manufacturing principles and the use of statistical tools to solve problems.
• Strong technical understanding of circuit card assembly producibility and process flow.
• Specific experience with SAP and Solumina manufacturing execution system. Mechanical and electrical aptitude, and the ability to quickly learn new software applications.
• Experienced user of MS S/W applications including MS Word, Project, Excel, Visio, and Power Point.
• MYDATA SMT pick & place machine equipment
• Ability to read and interpret Engineering Drawings, and to use viewing and editing tools such as AutoCAD or Corelis.
 
Job Number: 6946
Job Location: Clearwater, FL
Rate: 35.00-45.00
Per Diem: Possible
Overtime: Yes
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
UNIQUE SKILLS
Solumina and Catia experience preferred

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor’s degree in Mechanical, Manufacturing Engineering or related curriculum, or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Three (3) years Manufacturing Engineering, planning, or related technical experience.

POSITION PURPOSE
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning).

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
2. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
4. Investigate and assist in preparing justification for equipment and facility requests.
5. Perform productibility studies from engineering drawings.
6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
8. Incorporate Lean Manufacturing Methodology into existing and future processes.
9. Utilize CADAM/CATIA data and nesting software to generate flat patterns, Master Models, NC data, and ply nests to meet Engineering and Manufacturing requirements.
10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
12. Support all Safety, Sustainability and Ergonomic Initiatives.
13. Aid in development and maintenance of Business Continuity Plan.

ADDITIONAL FUNCTIONS
1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
2. Initiate and maintain accurate daily/weekly activity status based on work output, as required.
3. Perform other duties as assigned.

OTHER REQUIREMENTS
1. Proven knowledge of Lean and/or Six Sigma principles.
2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc.
4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 16-651-88624
Job Location: Southeast
Rate: $50.00/per hr.
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Manufacturing Engineer II

Location: Savannah, GA
Rate: $50.00/HR
Long Term contract


Unique Skills:
SAP, Solumina, Electrical systems knowledge

Education and Experience Requirements:
Bachelors degree in Mechanical, Manufacturing Engineering or related curriculum, or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Three (3) years Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning).

Principal Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 9. Utilize CADAM/CATIA data and nesting software to generate flat patterns, Master Models, NC data, and ply nests to meet Engineering and Manufacturing requirements. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. 3. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 6940
Job Location: Savannah, GA
Rate: $50.00/HR
Per Diem: Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Technician II

Description:
Manufacturing Technician II

Location: Burnsville, MN
Pay Rate - $25 – 35/hr
1 year contract
2nd Shift Monday-Thursday 3:00pm - 1:30am

Technical Tasks
Perform technical tasks based on written or verbal instructions. Utilize technical assets.
-Utilize microelectronic, electronic, optical, electro-optical, mechanical, or electromechanical equipment, including computers and lasers.
-Perform advanced troubleshooting, calibration or modification of hardware, fixtures, and software.
-Participate on and/or lead project teams.
-Apply technical expertise in the evaluation, development, maintenance and use of complex products, devices, tests, or procedures under constantly changing conditions where moderate ingenuity and judgments are required.
-Structure modifications to programs w/ Visual Basic or other SW packages/programs preferred.
-Design simple circuits, fixtures, or mechanical parts.
-Develop software programs to run NC machines.
-Provide technical solutions to engineering.
-Participate on safety initiatives.

Manufacturing Activities
Support manufacturing activities through the resolution of production problems, fabrication of complex hardware, equipment and training.
-Self-manage work flow throughout area with minimal guidance, to achieve team goals.
-Estimate labor, material, and manufacturing costs for the building and repair of product or process enhancement.
-Identify and correct minor process, material, design, or equipment problems
-Actively participate in material review activities including troubleshooting of non-conformances.
-Perform mid-level (moderately complex) testing or mechanical operations on production/repair hardware including troubleshooting to component level.
-Provide skill specific training to improve technique and/or understanding of theory of operation.
-Fabricate complex equipment, hardware or prototypes.

Documentation
Provide accurate recording of time changes, test data. Parts usage, etc. This requires data interpretation.
-Generate reports from test results and communicate results or take immediate corrective action to assure proper disposition of items in question.
-Write test procedures and manufacturing work instruction for complex or detailed assembly or test operations.
-Utilize multiple databases to create/use necessary information to provide information for decision making requiring judgment.

Minimum Education Requirement:
Associate’s/Technical Degree
 
Job Number: 6853
Job Location: Burnsville, MN
Rate: $25.00 - $35.00/HR
Per Diem: No
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer - Level 2

Description:
Mechanical Design Engineer - Level 2

Location: Dallas, TX
Rate: $50.00 - $60.00/HR
6 month contract
1st Shift

**Must have a current ACTIVE secret clearance**

Description
- Mechanical Design Engineer to support the Tactical Missiles Advanced Programs (TMAP) area design effort.
- Tasks will include conceptual and detail design of missile components, systems, and subsystems, and creation of 3D solid models and 2D drawings.
- Effort will require coordination of design(s) with other mechanical / electrical disciplines, familiarity with Solid Rocket Motors (SRMs), SRM suppliers, booster separation systems, and tolerance analysis.
- Must have Active Secret Clearance at time of submittal, preferably within the last 5 years. Please provide status of clearance on resume.


Skill/Experience/Education
Mandatory:
- Candidate should have a Bachelors of Science degree in Mechanical Engineering, or 10 years of equivalent experience, and 6-8 years of Computer Aided Design software experience using PRO Engineer / CREO 3.
- Candidate must be capable of creating and interpreting detail, assembly, and installation type drawings, knowledge of Geometric Dimensioning and Tolerancing, and experience with manufacturing engineering and fabrication processes.
- Familiarity with Microsoft Office applications is desired.
 
Job Number: 6908
Job Location: Grand Prairie, TX
Rate: $50.00 - $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer / UG/NX CA

Description:
Job Title: Mechanical Design Engineer
Job Number: 157711/4393
Location: Torrance, CA
Compensation: 50/hr
Assignment Length: 6 month contract


Description:

Mechanical Design Engineer
This position is responsible for development of complex electrohydraulic, electromechanical, mechanical, hydro-mechanical and electro-pneumatic components and systems that will become the new products of Moog, Inc. The incumbent, a fully trained professional, plans and conducts efforts requiring judgment in the independent evaluation, selection, and substantial adaptation and modification of standard engineering techniques, procedures, and criteria. Typically, the Design Engineer devises new approaches for the problems encountered.
Essential job functions: • Perform conceptual design, analysis, assembly/detail drawing creation in NX, and test planning for complex control hardware used on military aircraft
• Contribute to the development of new product requirements through consulting with customers and sales personnel
• Validate conceptual problem solutions through trade studies and by applying sound engineering principles
• Perform engineering calculations related to sizing, performance, tolerance and assembly
• Be a key contributor to the preparation of technical proposal, cost estimates, and program schedules
• Guide the evolution of conceptual design, technical project planning, detail design, and development testing throughout the program lifecycle
• Support programs with some travel (5-10%) and the participation in presentations to customers
• Represent Moog in a manner consistent with its leading-edge technical reputation
• Create reliable designs through a comprehensive experimental development test program
• Document designs, analyses, and test results with accurate and concise reports
Required skills: • 6+ years of design and development engineering experience
• Proficient in current versions of NX/UG computer-aided design software
• Self-starter with strong analytical skills and a desire for constant improvement
• Good sense of three-dimensional spatial orientation and knowledge of mechanical hardware design
• Proficient in assembly/detail drawings, GD&T, and dimensional tolerance analysis
• Team-oriented, with the desire to participate in and contribute to a high functioning team
Scope:
Education: • Bachelor’s degree in Mechanical or Aerospace Engineering
 
Job Number: MB-4393
Job Location: Torrance, CA
Rate: 50/hr max
Duration: 6 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer III

Description:
Seeking a Mechanical Engineer III for an opening in Anaheim, CA.

RESPONSIBILITIES:
Under general supervision, the Mechanical Engineer III is responsible for the mechanical layout and packaging of power conversion equipment and other Navy based electronic systems. This person generates equipment layouts that satisfy system requirements and account for tradeoffs among thermal, mass properties, structural and manufacturing considerations.

1.Interprets customer specifications to define requirements for mechanical designs.
2.Applies the Inventor 3D CAD system to create mechanical layouts and drawings.
3.Develops detailed fabrication and assembly drawings and performs tolerances analysis.
4.Designs interconnecting brackets and support structure between components and subsystems.
5.Supports other mechanical engineers and drafters in conceptual design and preparation of mechanical drawings.
6.Generates project cost estimates and selects components for various designs.
7.Performs thermal and structural analyses under the guidance of lead mechanical engineers.
8.Generates engineering design change orders and performs checking work.
9.Responsible for project budget/schedule adherence.
10.Uses established and well defined engineering procedures.
11.Knowledge of military and commercial standards pertaining to design, testing, hardware, material, and processes a must.
12.Able to work simultaneously on a variety of projects.
13.Takes directions from project engineer or department manager.

REQUIRED EXPERIENCE:
Bachelor of Science degree in Mechanical Engineering from four-year college or university. Must have at least 5 years of experience in mechanical design and engineering.

1.Practical experience with 3-D CAD and analysis software tools.
2.Knowledge of Mil-Specifications and qualification testing.
3.Good communication skills

•Electronics packaging experience and familiarity with Military specifications.
•3D CAD fluency is also a must along with experience with complex systems.
•Rigid flex/bus plane design
•System level design

ADDITIONAL EXPERIENCE:
•Electronics Packaging – this is a requirement for ME III and up for me. – ME III and up
•Recent 3d CAD experience (strong preference is Inventor) – ME II and up
•Vault experience or similar and how recently they’ve used it – ME II and up
•PLM experience (preferred, but not mandatory) – ME II and up
•Able to read basic schematics (preferred, but not mandatory) – ME II and up
•Tolerance Analysis – Preferred for ME II and ME III

EDUCATION:
Bachelor of Science degree in Mechanical Engineering from four-year college or university.

WORK HOURS:
9/80, Day Shift

LANGUAGE SKILLS
Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.

MATHEMATICAL SKILLS
Ability to work with mathematical concepts such as probability and statistics inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.

REASONING ABILITY
Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.

PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is regularly required to walk; sit; use hands and fingers, handle, or feel; reach with hands and arms; and talk or hear. The employee is occasionally required to stand. The employee must regularly lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus.

WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

The noise level in the work environment is usually moderate.

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 161355
Job Location: Anaheim, CA
Rate: $65 - $75
Per Diem: No
Overtime: Possible
Duration: 6 mths.
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: CHIPTON ROSS
Attention: Melody Mullins
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineers I - Anaheim, CA

Description:
STS AeroStaff Services is currently hiring Mechanical Engineers I for open positions in Anaheim, California.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Purpose:

Under general supervision, the Mechanical Engineer I interprets specifications and other requirements, performs complex analysis, design, plans, estimates tasks, directs the execution of detail design and ensures appropriate documentation on projects. The Mechanical Engineer I evaluates and integrates cost effective design, producibility, and manufacturing practices into mechanical designs. Works directly with all engineering supporting disciplines to establish product concepts and carries ideas through final product design. Coordinates and reviews the work of designers and drafters assigned to the program. Complexity of assignments requires the exercise of considerable initiative, planning, and independent judgment.

Job Duties:

• Reviews and interprets specifications and requirements to determine structural, thermal and critical safety characteristics/considerations for mechanical designs.
• Supports other mechanical engineers and drafters in conceptual designs and the preparation of mechanical drawings.
• Reviews and approves project documentation, change requests, etc.
• Performs conceptual designs to meet project objectives, cost, and schedule.
• Will be responsible for all phases of designs from concept through prototype manufacture and production.
• Performs feasibility studies to reconcile project requirements with proposed designs.
• Estimates material and labor costs for proposed designs and proposals.
• Designs cooling systems for new and updated products.
• Prepares and is responsible for project budget/schedule adherence.
• Performs packaging and mechanical design of power conversion equipment.
• Assists in cost estimates and interfaces with suppliers of components/sub-systems.
• Conducts thermal, structural and tolerance analysis.
• Strong knowledge of material and hardware selection including welding, fabrication practices, and machining tolerances to complete a cost-effective design.
• Interfaces with customers, vendors, and production to develop product requirements and solutions.
• Supports the manufacturing build and qualification testing requirements as needed.
• Responsible for maintaining Computer Aided Engineering/Design skills in support of the mechanical engineering and design functions.

Qualifications:

• Bachelor's degree (BSME) from four-year college or university; and minimum 8 years related experience and/or training.
• Knowledge of military and commercial standards pertaining to design, testing, hardware, material, and processes a must.
• Knowledge of Navy/Military environmental qualification testing.
• Knowledge of Mil-Specifications and contracting.
• Skilled in finite element analysis.
• Good communication skills.
• Experience using 3-D CAD software tools in design function.
• Autodesk Inventor, or equivalent modeling software (solid modeler) experience a must.
• Able to obtain DOD security clearance.
• Electronics packaging experience and familiarity with Military specifications.
• 3D CAD fluency is also a must along with experience with complex systems.
• Rigid flex/bus plane design and/or system level design is a plus.
• Electronics Packaging experience is a plus.
• Vault experience or similar and how recently they’ve used it is a plus.
• LM experience (preferred, but not mandatory).
• Able to read basic schematics (preferred, but not mandatory).
• Tolerance Analysis experience is a plus.

Requirements:

• Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations.
• Ability to write reports, business correspondence, and procedure manuals.
• Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
• Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
• Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.
• Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.
• While performing the duties of this job, the employee is regularly required to sit; use hands and fingers, handle, or feel; and talk or hear.
• The employee is occasionally required to stand, walk, and reach with hands and arms.
• The employee must regularly lift and/or move up to 10 pounds.
• Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus.

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 37307
Job Location: Anaheim, CA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Metrology Engineer

Description:
Metrology Engineer under minimal supervision, prepare, conduct, and evaluate for the implementation, programming and support of metrology equipment in tooling, program development and production. Assist with the improvements and problem solving for design and manufacturing issues related to tooling, material fabrication and assembly methods.


Interpret and consolidate aircraft engineering, tooling designs and production requirements, to develop optimized measurement plans and processes. Under minimal supervision, develop programing for all measurement equipment that will be used in the development, manufacture and support of aircraft. Collaborate with engineering, tooling, manufacturing engineering and operations to determine optimal manufacturing procedures. Assist in developing and documenting standards for the handling and utilization of metrology equipment. Create standardized inspection reports through the utilization of Metrologic software.

Extensive knowledge of metrology equipment, software and current measurement techniques. Knowledge 3D CAD/CATIA modeling and an understanding of GD&T. Knowledge of Lean and/or Six Sigma principles.
Ability to read/understand complex blueprints, sketches, verbal instructions and tools. Tooling experience and/or relevant training preferred. Experience with using precision 3D measurement devices to locate and assemble parts or tools. Must be proficient in the use of portable precision measuring devices especially laser trackers. Experience with Metrolog X4 or X4V5 software preferred. Experience with Catia V5 software. ***This job involves extensive Laser Tracker work on the shop floor. Experience with Laser Trackers is a must.***
Bachelor’s degree in Mechanical Engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Three (3) years Metrology Engineering, Manufacturing Engineering, Automation Engineering or related technical experience. Two (2) years 3D CAD/CATIA experience.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Metrology Engineer (Laser Tracker Operator)

Description:
Under minimal supervision, prepare, conduct, and evaluate for the implementation, programming and support of metrology equipment in tooling, program development and production. Assist with the improvements and problem solving for design and manufacturing issues related to tooling, material fabrication and assembly methods.

Unique Skills:
1. Must have extensive experience with Laser Trackers
2. Knowledge of Metrolog X4V5, X4, and XG.
3. Knowledge of session management and releasing in SmarTeam is a plus.

Education and Experience Requirements:
Bachelors degree in Mechanical Engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
Three (3) years Metrology Engineering, Manufacturing Engineering, Automation Engineering or related technical experience. Two (2) years 3D CAD/CATIA experience.

Other Requirements:
Extensive knowledge of metrology equipment, software and current measurement techniques.
Knowledge 3D CAD/CATIA modeling and an understanding of GD&T.
Knowledge of Lean and/or Six Sigma principles
 
Job Number: 24-269
Job Location: Savannah, GA
Rate: $50 - $55/hr
Per Diem: YES
Overtime: YES
Duration: 1 plus years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NC Programmer - NX

Description:
Provides numerical control, machining and programming technical experience. Establishes technical requirements for manufacturing and producibility. Plans, creates, verifies and revises Machine Control Data (MCD), geometry and documentation that directs the operations for a complete spectrum of numerically controlled equipment required to manufacture and inspect parts, tools and assemblies for departmental work. Plans and guides the development and integration of new machining techniques and manufacturing methods, processes, software and equipment. Works under general direction. Current Unigraphics/NX experiences required .

AA degree in related discipline/and or and 3 or more years of related experience. Manager is hiring one person for 1st shift (6:00 AM - 2:30 PM) and one person for 2nd shift (2:30 PM - 11:00 PM). If candidate is not available to work either shift please be sure to add comment on shift they are able to support. Must be US Person for purposes of Export Compliance.

Manager is hiring one person for 1st shift (6:00 AM - 2:30 PM) and one person for 2nd shift (2:30 PM - 11:00 PM). If candidate is not available to work either shift please be sure to add comment on shift they are able to support.
 
Job Number: 36553
Job Location: CA
Rate: open
Per Diem: split
Overtime: possible
Duration: 6+ months
Start Date: 1/2017
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Erica Price
Address: WESTRIDGE OFFICE PARK
2646 HIGHWAY 109 STE 207

City, State: WILDWOOD, MO 63040
Phone: 636/438-0312
800 Phone: 866/277-3343
Fax Phone: 636/220-8284
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NC Programmer - Numerical Control Programmer (CA)

Description:
Provides numerical control, machining and programming technical experience. Establishes technical requirements for manufacturing and producibility. Plans, creates, verifies and revises Machine Control Data (MCD), geometry and documentation that directs the operations for a complete spectrum of numerically controlled equipment required to manufacture and inspect parts, tools and assemblies for departmental work. Plans and guides the development and integration of new machining techniques and manufacturing methods, processes, software and equipment. Works under general direction. Current Unigraphics experiences required.

AA degree in related discipline/and or and 3 or more years of related experience.
 
Job Number: NCca
Job Location: Huntington Beach, CA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NC Programmer 3

Description:
Please call or email Holly Herrera at 253-455-3711 or hherrera@iconma.com

• NC Programmer 3
• Huntington Beach, CA
• 6 months

Provides numerical control, machining and programming technical experience. Establishes technical requirements for manufacturing and producibility. Plans, creates, verifies and revises Machine Control Data (MCD), geometry and documentation that directs the operations for a complete spectrum of numerically controlled equipment required to manufacture and inspect parts, tools and assemblies for departmental work. Plans and guides the development and integration of new machining techniques and manufacturing methods, processes, software and equipment. Works under general direction. Current Unigraphics experiences required .
 
Job Number: 24206-1
Job Location: Huntington Beach, CA
Per Diem: Yes
Overtime: Possible
Duration: 6 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Holly Herrera
Address: 859 STEPHENSON HWY
City, State: TROY, MI 48083
Phone: 843/955-9221
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Network Design Engineer III (WA) - ACTIVE SECRET

Description:
ACTIVE SECRET CLEARANCE REQUIRED TO START.

Performs network and component management to ensure technical viability and cost-effectiveness from the point where it is evaluated through implementation and support, to retirement. Uses technical expertise to help business partners and others by answering technical questions regarding the usage, trouble-shooting and functionality of network\delivery systems to ensure effective implementation. Have a strong knowledge of computing and network systems to assist in troubleshooting techniques. Assist the team in choosing appropriate network\computing products and methods to ensure requirements are met for security, problem management, capacity/performance management and operational management. Identifies, and documents requirements for network and computing technologies and services.

Additional Tasks and Responsibilities:
- Prepares, deploys and coordinates installation of implementation packages per Boeing standards. Performs maintenance of network systems
- Analyzes business requirements to develop computing requirements assuring that expectations such as functionality, reliability, availability, affordability, security and performance are comprehensive and feasible. Documents and presents recommendations.
- Designs systems and/or components to meet requirements by analyzing and evaluating information gathered against existing standard products and strategies, as well as new technologies, to create integrated designs. Uses technical and industry knowledge to evaluate technical components to assess which will be viable solutions to satisfy customer requirements. Make recommendations and presents solid solutions to stakeholders and documents.
- Builds and/or configures network and delivery systems (operating systems and operational software) and/or components by obtaining, developing, assembling, and integrating hardware and software components in order to deliver/deploy product or service.
- Develops test plans such as functional, integration and usability. Tests delivery systems and/or components to ensure that components and systems function according to test plans and are ready for production.
- Makes choices in the use of testing techniques that will be appropriate to ensure production readiness of network computing components. Assesses component for readiness and determines whether or not it should be implemented. Documents and presents results and proposes corrective actions as needed to stakeholders, peers and suppliers to validate delivery systems and/or components functions.
- Evaluates and documents emerging technology trends and products of potential interest to the company in advanced technology area of expertise. Reviews technical literature and commercial products.
- Assists the consulting team as a subject matter expert by conducting research and making recommendations.

Technical bachelor’s degree and typically 5 or more years’ related work experience or a Master’s degree with typically 3 or more years’ or a PhD degree or an equivalent combination of education and experience. A technical degree is defined as any four year degree, or greater, in a mathematic, scientific or information technology field of study.
 
Job Number: NetworkEngWA
Job Location: Kent, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 8-12+ Months
Start Date: 01/06/2017
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Network Designer

Description:
**Active secret clearance is required to start. Candidates who do not have an active clearance will not be considered.**

Performs network and component management to ensure technical viability and cost-effectiveness from the point where it is evaluated through implementation and support, to retirement. Uses technical expertise to help business partners and others by answering technical questions regarding the usage, trouble-shooting and functionality of network\delivery systems to ensure effective implementation. Have a strong knowledge of computing and network systems to assist in troubleshooting techniques. Assist the team in choosing appropriate network\computing products and methods to ensure requirements are met for security, problem management, capacity/performance management and operational management. Identifies, and documents requirements for network and computing technologies and services.

Additional Tasks and Responsibilities:
- Prepares, deploys and coordinates installation of implementation packages per Boeing standards. Performs maintenance of network systems
- Analyzes business requirements to develop computing requirements assuring that expectations such as functionality, reliability, availability, affordability, security and performance are comprehensive and feasible. Documents and presents recommendations.
- Designs systems and/or components to meet requirements by analyzing and evaluating information gathered against existing standard products and strategies, as well as new technologies, to create integrated designs. Uses technical and industry knowledge to evaluate technical components to assess which will be viable solutions to satisfy customer requirements. Make recommendations and presents solid solutions to stakeholders and documents.
- Builds and/or configures network and delivery systems (operating systems and operational software) and/or components by obtaining, developing, assembling, and integrating hardware and software components in order to deliver/deploy product or service.
- Develops test plans such as functional, integration and usability. Tests delivery systems and/or components to ensure that components and systems function according to test plans and are ready for production.
- Makes choices in the use of testing techniques that will be appropriate to ensure production readiness of network computing components. Assesses component for readiness and determines whether or not it should be implemented. Documents and presents results and proposes corrective actions as needed to stakeholders, peers and suppliers to validate delivery systems and/or components functions.
- Evaluates and documents emerging technology trends and products of potential interest to the company in advanced technology area of expertise. Reviews technical literature and commercial products.
- Assists the consulting team as a subject matter expert by conducting research and making recommendations.

Technical bachelor’s degree and typically 5 or more years’ related work experience or a Master’s degree with typically 3 or more years’ or a PhD degree or an equivalent combination of education and experience. A technical degree is defined as any four year degree, or greater, in a mathematic, scientific or information technology field of study.
 
Job Number: 36647
Job Location: WA
Rate: open
Per Diem: split
Overtime: possible
Duration: 8 months
Start Date: 1/2017
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Erica Price
Address: WESTRIDGE OFFICE PARK
2646 HIGHWAY 109 STE 207

City, State: WILDWOOD, MO 63040
Phone: 636/438-0312
800 Phone: 866/277-3343
Fax Phone: 636/220-8284
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Designer

Description:
  • Six (6) years experience in aircraft interior design or related field.
  • Proficiency of design principles, color theory, and textile and leather production techniques required.
  • Knowledge of FAA regulations relating to interior finish requirements required.
  • Possess working knowledge of Microsoft Office software.
  • Provide design guidance to studio designers.
  • Bachelor’s degree in Interior Design or related curriculum, or equivalent combination of education and experience to
    successfully perform the essential functions of the job.
  • Must be willing to travel extensively world wide on short notice.
     
  • Job Number: 24-150
    Job Location: GA
    Rate: DOE
    Per Diem: Split
    Overtime: Possible
    Duration: 1 year plus
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Project Engineer

    Description:
    What You Will Be Doing:
    1. Engineering: Take full responsibility for project engineering activities and ensure that all engineering functions are completed in a timely, efficient manner and to the client's satisfaction.
    2. System design drawings: Generate and develop system block diagrams, system single lines, and rack elevations.
    3. Facility documentation: Prepare facility impact packages including conduit plans, cable schedules, engineering calculations for power consumption and heat load, equipment site plans, projection sightline drawings and user interface solutions (OCC panels and touch screen layouts).
    4. Procurement: Validate equipment specifications and assist the Project Manager with purchasing activities if required.
    5. Test: Conduct or oversee Factory and Site Acceptance Tests (FAT, SAT) and preprogramming activities to ensure systems meet defined performance specifications and quality standards.
    6. Commissioning: Take full responsibility for the commissioning of The company systems on site. Ensure that systems are operational on schedule to allow programming and handover of the completed systems. Ensure systems meet or exceed minimum required performance specifications.
    7. Programming: Take full responsibility for the project's programming requirements to ensure that all system programming is completed in a timely, efficient manner and to the client's satisfaction.
    8. Communications: Effectively communicate engineering clarifications, design changes, and equipment substitutions to other departments and to clients' other consultants. Prepare and/or respond to Requests for Information (RFIs). Communicate installation, commissioning and programming requirements to other The company staff.

    Experience, Skills and Attributes you will need to be successful:
    1. Ability to read, create, and edit A/V/C technical specifications and system drawings.
    2. Ability to successfully commission all aspects of an Audio Visual installation.
    3. Ability to interface well with clients and co-workers.
    4. Excellent written and verbal communication skills.
    5. Ability to work on the engineering of several projects simultaneously.
    6. Strong troubleshooting and fault finding skills.
    7. Proficiency in programming Audio Visual equipment (e.g. AMX, Biamp, ClearOne, Crestron, Medialon, AMX, ESCAN, Watchout, Peavey Nion, Soundweb, Cisco, Polycom, Extron, and others).
    8. Experience with audio DSP device programming. Experience with SMAART and EASE a plus.
    9. Proficiency in a specialty within the Audio Visual industry.
    10. Detail oriented with strong organizational skills.
    11. VTC codecs, audio conferencing
    12. CAD for creating and editing drawings
    13. Industry certifications such as Infocomm CTS, CTS-D, CTS-I

    Qualifications are required:
    1. A Degree (or equivalent) in a related field.
    2. Minimum three years of professional experience in Audio Visual technology and integration.
    3. Hands-on fabrication and/or installation experience.
    4. Knowledge of current products and trends in audio, video, control, and/or other related industries.
    5. Proficiency with computers and standard office programs (MS Word, Excel, Outlook), knowledge of Audio Visual Software. AutoCAD and/or MS Visio experience.
     
    Job Location: Orlando, FL
    Rate: Open
    Duration: Permanent
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Sidney Williams
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Project Engineer Aerospace Test - Contract DY

    Description:
    Project Engineer Aerospace Test
    Ingenium is looking for a Test Project Engineer to work at a client’s facility in Dayton Ohio supporting test of development high speed rotating turbine type equipment

    Must be a U.S. Citizenship or Lawful Permanent Resident. No Visa or Student Visa candidates considered.

    Additional Job Postings: http://www.ingeniumtech.com/tech_staffing/
    Responsibilities:
    Individual is required to serve in a technical project engineering role as a member of one of the clients starting product design teams. The product will be a high speed, pneumatic driven air turbine device connected to a gearbox speed reducer. The general direction for the individual in this role will be provided by the Engineering Leader, Engineering Project Management and Marketing/Sales leadership assigned to the product.
    The role will be as a technical project engineer that will be responsible for the organization and timely accomplishment of various starting product related engineering activities. These tasks could include, but are not limited to, design, analysis, test, production support and direct customer support. It will be the responsibility of the person serving in this role to organize and directly monitor the technical activities utilizing available local and global resources. It will also be necessary for this individual to complete these activities when required. Required technical activities are to be completed in compliance with the quality and deliverable requirements provided by the project and/or marketing leadership. It will also be the responsibility of this individual to ensure completion of all necessary reports and design documentation supporting the decision-making process necessary to complete the requested activities
    Desired Qualifications
    Experience with effort required to perform static and dynamic stress and vibration finite element analyses using ANSYS software
    Experience in the monitoring and completion of design, analysis and testing in the following areas:

    • Rotating machinery
    • Power transmission and related machine design elements
    • Dynamic and static seals
    • Bearings
    • Turbomachinery
    • Fluid flow in piping and valves


    Involvement in projects requiring the design and analysis of structural housings that must survive in shock and high vibration environments
    Ability to write and organize the completion of design and analysis reports
    Ability to perform tolerance stack-ups on layout and check detail drawings with GD&T
    Basic understanding of Design for Manufacturing and basic manufacturing methods of metallic components
    Experience with UG NX CAD or equivalent 3-D design software
    Solid oral and written communication skills
    Strong interpersonal skills with emphasis on the ability to learn from and lead co-workers
    Experience in the organization of field failure reviews
    Experience with the organization and completion of multiple project initiatives in a timely manner consistent with project timeline requirements
    Experience leading technical discussions with component suppliers regarding new product
    definition and product quality.

    Responsibilities
    Participate in the design, analysis, and test elements of assigned tasks using sound engineering principles and adhering to business standards, practices, procedures while fulfilling product / program quality and delivery requirements
    Utilize technical and organizational aptitude to complete assigned project activities in alignment with project timeline objectives
    Participate in preparation of and presentation of technical and program reviews
    Assure timely completion of proper documentation of technical data generated for the assigned projects and/or tasks
    Interact with suppliers regarding completion of engineering project initiatives that include new component definition, quality concerns with existing products and in the support of field failure reviews.
    Participate in the design, analysis, and test of assigned tasks using sound engineering principles and adhering to business standards, practices, procedures while fulfilling product / program requirements
    Desired Software: LabVIEW experience is helpful but not required
    Required Education & Experience:
    Bachelor’s Degree in Mechanical or Aerospace Engineering or any specialized equivalent from an accredited university or college preferred. Comparable experience in test of comparable equipment considered
    Position: Contract 12 months
    Location: Dayton Ohio

    Employment Criteria: U.S. Citizenship is required by law or government contract for this position. This position includes access or potential access to ITAR technical data. Therefore, candidates will need to qualify as a US Person which is defined as a US Citizen, a Permanent Resident who does not work for a foreign company/foreign government/foreign governmental agency or organization, or a political asylee in compliance with International Traffic in Arms Regulations.
    Employment Statement: Ingenium Technologies is an equal opportunity employer and does not discriminate on the basis of race, color, religion, sex, age, national origin, disability, veteran status, sexual orientation or any other classification protected by federal, state or local law. Proof of eligibility for employment will be required upon employment.
    Due to the requirements of the Customer, No Visa sponsorship is available.
     
    Job Number: 69997
    Job Location: Rockford, IL Illinois
    Rate: $35.00/hr.
    Per Diem: possible
    Overtime: possible
    Duration: 12 mos
    Start Date: 2 weeks
    Input Date: 11/14/2020
    Firm Name: INGENIUM TECHNOLOGY
    Attention: David Johnson
    Address: 4216 MARAY DR UNIT A1
    City, State: ROCKFORD, IL 61107
    Phone: 815/315-9273
    Fax Phone: 815/399-8804
    Website: www.ingeniumtech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Quality Engineer

    Description:
    SUMMARY:
    This position requires proficiency and faculty in dealing with elements of Quality Control, Engineering and Manufacturing. Sustain and strengthen the Quality Management System. Provide Quality Control procedures, and instruction to maintain Quality and workmanship standards as established by the company and their Customers. Must have the ability to negotiate with Company, Customers and Suppliers personnel at all administrative levels. Assist Engineering Department personnel in prototype, research, and failure analysis efforts. Reports to the Director of Continuous Improvement & Strategic Alignment.

    ESSENTIAL FUNCTIONS:
    � Create Inspection Plans for Inspection to inspect; first articles, in-process, final inspections, and receiving inspections of parts and assemblies per blue print and Customer requirements.
    � Create and maintain procedures and work instructions.
    � Learn to perform internal and external audits.
    � Supplier liaison for quality.
    � Designated Inspector for Customers.
    � Perform Source Inspection at suppliers.
    � Review Manufacturing Planning to ensure Quality requirements are met.
    � Review Engineering Change Request to ensure Quality requirements are met.
    � Learn to review incoming Purchase Orders from Customers to ensure quality requirements are flowed down.
    � Member of the Material Review Board for Quality Engineering dispositions.
    � Learn to perform Design review for Quality requirements.
    � Able to perform visual and dimensional inspection of parts and assemblies using: All types of inspection equipment including Optical Comparator, Sine Plate, Surface Plate and Height Gage, Hardness Tester, Dial Bore Gage, etc.; Engineering, customer and supplier drawings, sketches, specifications, catalogues and instructions; Manufacturing Operation Instruction sheets, Inspection Plans, Inspection sampling plans, Repair Station Instructions
    � Records inspection results in QMS.
    � Able to perform all duties of an Inspector �A�
    � Must be capable of making own set-ups for inspection, including setups for checking Form Tolerances, Orientation Tolerances, Runout Tolerances, Profile Tolerances, Location Tolerances.
    � Must have an excellent understanding of ASME Y14.5: All symbols, modifiers, Tolerance Zones, Feature Control/Datum Reference Frames, General Rules, Free state Variation, Fundamental Rules, Basic Dimensions, Datums and Datum Selection, Datum Symbol Placement, Virtual Condition, Datum Targets, Position Tolerance Calculation, Projected Tolerance Zones, Chain Line and Chain Dimensions.
    � Knowledge of Repair Station Instructions according to a Component Maintenance Manual.
    � Knowledge of FAA conformity Inspection.
    � Knowledge of Coordinate Measuring Machine Programming and Operation of the machine.
    � Analyze facts and circumstances surrounding individual inspection problems and determine acceptance or rejection of parts within requirements.
    � Provides instruction to all Inspectors as needed concerning the inspection and verification of the product.
    � Performs inspection and records results to assist other departments in their research and analysis work.
    � Works under the supervision of the Director of Continuous Improvement & Strategic Alignment but discusses observations with designated personnel (Lead personnel, Engineers, etc.) from other departments.
    � Review certification packages delivered with parts from suppliers for accuracy and adequacy.
    � Performs other miscellaneous duties as assigned by the Director of Continuous Improvement & Strategic Alignment.
    � Extended periods of mental and visual concentration to efficiently check work of others required.
    � Considerable tact required as some contact could occur with customers, suppliers, and persons of higher rank in the company.
    � Must tolerate some exposure to dirt, oil, grease, and noise.
    � Responsible for promoting and abiding by the HSE rules and policies.
    � All other duties as assigned
    PRIMARY TOOLS OR EQUIPMENT: Computers, printers, calculator and inspection equipment.

    KNOWLEDGE, SKILLS, AND ABILITIES REQUIRED:

    Education and/or Experience: BS Degree and 3 years of experience in an Aerospace Manufacturing Inspection environment

    Language Skills: Ability to read and comprehend instructions, correspondence and memos. Good verbal skills with ability to effectively present information to customers, managers and other employees of the organization.

    Mathematical Skills: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability calculate figures and amounts such as percentages and to draw and interpret bar graphs. Use general shop mathematics including trigonometry.

    Computer Skills: Working knowledge in Windows and software data packages using Word and Excel. Software experience in producing spreadsheets for reports, presentations and planning. Knowledge MRP and HP system is desirable.

    Problem Solving: Ability to define problems, collect data, establish facts and draw valid conclusions. Demonstrate problem solving techniques, use technical resources, analyze alternatives and research issues.
    Other Teamwork or Skills and Abilities: Ability to participate as a team member, daily or in meetings. Ability to listen actively and respond in group discussions. Willingness to learn other job skills and assist other team members. Understanding of team and business goals. Reassess work based on team goals and team priorities.

    Physical Requirements: While performing the duties of this job, the employee is frequently required to sit; stand; walk, use hands to finger, handle or feel objects, and reach with hands and arms. The employee is occasionally required to stoop, kneel, or crouch.

    The employee must frequently lift and/or move up to 10 pounds and occasionally lift up to 20 pounds. Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus from close items to items at a distance.
     
    Job Location: Burbank, CA
    Duration: Permanent
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Sidney Williams
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Quality Inspector

    Description:
    Unique Skills:

    Candidates must have experience with aircraft mechanical systems installation with some experience with aircraft electrical systems installations preferred. Experience with Solumina, Smarteam, and Catia V5 preferred.


    Education and Experience Requirements:

    Bachelors degree in Mechanical, Manufacturing Engineering or related curriculum, or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Three (3) years Manufacturing Engineering, planning, or related technical experience.

    Position Purpose:

    Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning).

    Principal Duties and Responsibilities:

    Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 9. Utilize CADAM/CATIA data and nesting software to generate flat patterns, Master Models, NC data, and ply nests to meet Engineering and Manufacturing requirements. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

    Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. 3. Perform other duties as assigned.

    Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc. 4. Lean Six Sigma Greenbelt Certification or higher preferred.

    Languages Required (in addition to English): No Selection
     
    Job Location: Savannah, GA
    Rate: Open
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INNOVA SOLUTIONS, INC
    Attention: Andrew Walbert
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.innovasolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Real Time Simulator Engineer with active secret GA

    Description:
    Job title: Real Time Simulator engineer
    Job Number: 158190/0319
    Location: Marietta, GA
    Compensation: 55-75/hr(DOE)
    Assignment Length: 12 month contract
    Security Clearance Secret (Prime Contract:, Can start w/o clearance:No, Interim Clearance Sufficient:Yes)
    Non exempt
    1st shift

    Description:


    The selected candidates will become a technical staff member for laboratory development for F-22 and F-35 Pilot-in-the-loop simulators. .

    The specific assignment will be the development of real-time software products in Ada and C++ to be used in the F-22 and F-35 Labs.

    The successful candidate can expect simulation and modeling assignments in one or more of the following areas: RF and IR signatures, Electronic Warfare, Aircraft and associated Avionics for man-in-the-loop simulation, Aircraft Control and Propulsion Systems, air-to-air and/or surface-to-air missiles, air-to-ground weapons, missile control systems, expendable countermeasures, ground-based early warning, acquisition, and tracking radars.

    These software models will be developed in primarily in Ada with some C++. A Bachelor Degree or Master's Degree in Electrical Engineering or Aerospace Engineering with significant software development experience and simulation / modeling experience are preferred for these positions.

    However, other technical disciplines (Physics, Math, Computer Science, Computer Engineering, etc.) will be considered along with relevant work experience for applicability to this position.

    Prior use of Ada and C++ software languages is required as well as direct experience with real-time software systems and environments.

    Excellent communication skills, computer skills, and computer architecture knowledge and domain knowledge in simulation and/or real-time embedded software system is desired.

    Applicants selected will be subject to a government security investigation and must meet eligibility requirements for access to classified information.

    An active Secret clearance is required for this position.

    Development work uses C++, Ada, limited Python, Eclipse, DOORS, Dimensions, UML, and AdaCore GnatPro Studio (GPS).

    Skill/Experience/Education
    Mandatory:

    Experience required with developing real-time embedded software in C++ and/or Ada.

    Must have a proven ability to work well in a team environment.

    Excellent software development skills and experience

    Desired:

    Domain expertise in one or more of the following areas: RF and IR signatures, Electronic Warfare, Aircraft and associated Avionics for pilot-in-the-loop simulation, Aircraft Control and Propulsion Systems, air-to-air and/or surface-to-air missiles, air-to-ground weapons, missile control systems, expendable countermeasures, ground-based early warning, acquisition, and tracking radars
    Object Oriented Analysis and Design using UML

    Skill Matrix
    Skill Name Description Level (1-5, 5 being the highest)
    1 2 3 4 5 Years Mandatory(Yes/No)
    Software Development -- Ada Ability to develop software using the Ada 95 language 4-5 Years Yes
    Software Development -- C++ Ability to develop software using the C++ SW language 9-10 Years No
    Real-Time Software Development Ability to develop software in a real-time environment, understand the constructs and concepts of hard real-time programming 4-5 Years No
    Object Oriented Software Development ability to develop software using Object Oriented constructs and concepts 6-8 Years No
    Simulation Software Development Experience developing software for simulation, preferably aircraft and/or threat simulations 6-8 Years No
    Warfare Simulation Expertise Knowledge of electronic warfare concepts and how it applies in simulation 9-10 Years No
     
    Job Number: DW-0319
    Job Location: Marietta, GA
    Rate: 55-75/hr DOE
    Duration: 12 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Senior Desktop GUI Software Engineer-Contract to Hire

    Description:
    Job Description
    Major purpose: Seeking experienced software engineer to re engineer existing desktop application for X-ray scanners. Candidate will work with software team lead to understand existing application and design/implement a modern replacement. Candidate will work in Woburn office with direct access to our X-Ray scanners and source code control.
    The scope of work for this position should be for 4-6 months.
    Major functions: Work with software team lead to design, develop, and test a modern implementation of a legacy desktop application. Key features of the redesign are offloading image processing to GPU and converting existing rigid architecture into asynchronous modules. This application is targeted to run on Windows 10.
    Applicants must have previous experience using GPU acceleration (DirectX or OpenGL) techniques that are supported in Windows 10 and newer video cards.
    Applicants must have previous experience designing multi threaded asynchronous architectures that support parallel processing.
    Applicants must be motivated individuals that are capable of working in a small team with minimal oversight.
    Technical/Functional skills: Review existing application code base to understand business logic.
    Document functional requirements for new application design.
    Design new architecture to support existing functionalities and enhancements.
    Review architecture design with software team.
    Implement and test new design on X-ray scanners incrementally.
    Education/Experience/Licenses etc.: Education and EXPERIENCE:
    Bachelor’s Degree in Engineering or equivalent technical discipline.
    Master’s Degree preferable.
    Hands on software development experience in real time graphical application under Windows OS using C, C++ languages.
    Hands on experience in DirectX or OpenGL for graphics application development to use GPU for image processing (HLSL/GLSL).
    Hands on experience in developing real time application with multithreading, parallel processing (OPENMP, etc).

    Development Platform and Tools:
    Microsoft .Net Visual Studio 2010 and higher is must, Source control tools (PVCS, CM Synergy, or similar), Experience with requirement and bug tracking tools and Microsoft Word, Visio, etc.
     
    Job Number: 23232
    Job Location: Woburn, MA
    Rate: 50.00 per hour
    Per Diem: NO
    Overtime: Yes
    Duration: 6+ months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: YOH SERVICES
    Attention: Jessalyn McKeown
    Address: STE 100
    11960 WESTLINE INDUSTRIAL DR

    City, State: ST LOUIS, MO 63146-3212
    Phone: 314/791-1565
    800 Phone: 800/298-0666
    Website: jobs.yoh.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Senior Maintenance Technician

    Description:
    Title: Senior Maintenance Technician
    Location: Sylmar, CA
    Duration: 12 Months

    Job Summary:
    Under general supervision, the Senior Maintenance Technician performs preventative maintenance and repairs on production equipment.

    Primary Responsibilities
    • Troubleshoot equipment problems & perform root cause analysis
    • Performs repairs on manufacturing equipment.
    • Must have good mechanical & electrical comprehension, manual dexterity, and the ability to lift up to 30 lbs. up to five times daily, occasionally moving much heavier items (i.e. 175 lbs with moving equipment).
    • Performs scheduled maintenance on manufacturing equipment (daily, weekly, monthly, quarterly, semi-annually, annually)
    • May perform other maintenance & repair tasks on manufacturing tooling, equipment, & facilities
    • May support facility, environmental, & safety requirements
    • Will be actively involved in the implementation & sustaining of TPM & SMED
    • Develop & maintain critical spare parts inventory
    • Be able to enter & retrieve maintenance data in database
    • Maintain the highest ethical standards, even when challenged from above
    • Understand and live by clients ethics and business conduct policies

    Qualifications:
    • Employee must be able to take initiative and work with minimal supervision.
    • Have an understanding of and follow safe work practices.
    • Good communication skills and ability to get along well with others is essential.
    • Have familiarity with PC running Windows & maintenance software

    Education Requirements:
    • High school education or general education degree (GED) or equivalent combination of education and experience

    **Additional Information**:
    • Candidates must have good working knowledge and experience with various CNC, Lathes, Mills and Injection Molding machines and how they operate.
    • Candidates must have a basic understanding of machining principles.
    • Candidates must have experience troubleshooting and know how to troubleshoot issues with various manufacturing equipment used such as CNC, Mills and Injection Molding machines.
     
    Job Number: 51033
    Job Location: Sylmar, CA
    Rate: USA
    Duration: 7 mos
    Input Date: 11/14/2020
    Firm Name: BUTLER AEROSPACE & DEFENSE
    Attention: Mallik
    Address: SHELTON POINTE STE 204
    2 TRAP FALLS ROAD

    City, State: SHELTON, CT 06484
    Phone: 203/926-2705
    Website: www.butler.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Senior Project Engineer

    Description:
    The Project Repair and Overhaul Engineering (GPE) position will perform an integral technical role that could be based in any of our factories or Service Centers. The position is part of the Global Repair & Overhaul Engineering Organization (GROE), Avionics-Electronics (AvEl) group.

    The position provides an individual with the opportunity to exercise their diverse technical and specific product knowledge to define, create and implement: rework, repair and evaluation of avionic products.


    Responsibilities:


    Repair and Overhaul (R&O) Project Engineering (GPE) primary responsibilities:
    Own and drive GROE Value Creation Process (VCP) and project tracking
     
    Productivity and Cost Reduction


    Actively seek out and identify areas to standardize the repair and test procedures for maximum savings and effectiveness across Service Centers.
    Provide on-going Make vs. Buy vs. Repair analysis & identify areas of focus.
     
    Technology & Implementation
    Drive technology implementation projects to deliver operational improvements
    Research new and existing technologies for potential application

    Planning and Program Management


    Liaison coordination between site repair development engineering, site quality, test engineering, product engineering and FAA DER for substantiation and authorization of engineering documentation.
    Program manage repairs and projects using workflow tools and VCP
    Develop and support M&PM strategies & participate on CSB's as required.
     
    Basic Qualifications:
    A Bachelor's Degree in Engineering, Supply Chain, Business, or Project Management.
    Must be US Citizen or Permanent Resident due to ITAR/Export Requirements.



    Additional Qualifications:
    High degree of Microsoft Office familiarization
    PMP Certification
    Knowledge of FAA regulations & processes on avionics and related software.
    Understanding of FAR 21 (OEM-Factory) and FAR 145 (Repair Station).
    Understanding of specific regulations DO 178, DO 254 and DO 160.
    Understanding and compliance to export regulation and ITAR information.
    Digital/analog component systems knowledge.
    Knowledge of Interchangeability and Configuration Management.
    Awareness of product test requirements and limitation of test equipment to replicate aircraft.
     
     
    Job Number: 17-00279
    Job Location: Phoenix, AZ
    Rate: 50.00
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: NESCO RESOURCE
    Attention: Dave Mahabir
    Address: 101 COMMERCE ST STE 3001
    City, State: LAKE MARY, FL 32746
    Phone: 407/710-8000
    Fax Phone: 407/710-8001
    Website: www.nescoresource.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Sim & Software Engineer-Tech Spec 1

    Description:
    Sim & Software Engineer-Tech Spec 1
    Savannah, GA
    Rate: $53-$58


    Unique Skills:

    Areas of knowledge sharing, evaluating, and delivering results will be primarily in the following areas (but not limited to): - Matlab/Simulink experience modeling for hardware in the loop, real time aircraft systems - Simulation model/platform updates or improvements - Rectifying lab issues through troubleshooting, evaluation and solution development and implementation - Responsible for satisfying lab customer needs/requirements - Scripting and GUI development - Research and development in the areas of simulation and software - Designing software Standard Operating Process and Work Method - Reading electrical and simulation drawings - Integrating various I/O types (analog, discrete, data bus, etc) into the simulation platform - Understanding standard aircraft industry I/O protocols (ARINC 429, 664, 485, 717, etc) - Aircraft systems HWIL and integration into a real time simulation environment - Real Time simulation principles


    Education and Experience Requirements:

    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

    Position Purpose:

    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

    Principal Duties and Responsibilities:

    Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

    Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 6774
    Job Location: Savannah, GA
    Rate: $53-$58
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Brad Becker
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Sim & Software Engineering Consultant

    Description:
    Sim & Software Engineering Consultant
    Savannah, GA
    $58.00-63.00/HR
    Long Term Contract

    Unique Skills:
    Job Description Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline

    Education and Experience Requirements:

    Languages Required (in addition to English): No Selection
     
    Job Number: 6706
    Job Location: Savannah, GA
    Rate: $58.00-63.00/Hr
    Per Diem: $110/Weekly
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Brad
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Simulation & Software Engineer

    Description:
    Simulation & Software Engineer
    1. Matlab/Simulink experience modeling real time aircraft systems 2. Aerospace background with avionics lab testing experience 3. Ability to understand aircraft electrical wiring diagrams as it relates to HIL simulation 4. Experience with high level programming or scripting language such as C/C++, Python 5. Knowledge of data protocols used in aerospace 6. Experience modeling aircraft systems in real time on industry standard simulation platforms (eg NI,Dspace,ADI) 7. Flight and/or aircraft system lab HIL simulation experience 8. Ability to work independently and self-govern priorities in accordance with lab customer needs 9. Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.

    Education and Experience Requirements:
    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.

    Position Purpose:
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

    Principal Duties and Responsibilities:

    Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned
     
    Job Location: Savannah, GA
    Rate: Open
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INNOVA SOLUTIONS, INC
    Attention: Andrew Walbert
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.innovasolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Software Code Tester

    Description:
    Software Code Inspector (Test Engineer)

    Job Location Danbury, CT

    Approximately 6 month contract

    Position Summary:

    The Software Code Inspector (Test Engineer II) will perform requirements analysis, design, implementation, integration, verification, and validation for automated test equipment, test program sets, as well as embedded diagnostics test applications. Ideally test experience should include inspection pertaining to style, functionality and design specifications. Candidate must be an energetic, highly motivated individual with the ability to work off shift and weekend hours if needed.

    Duties and Responsibilities:
    •Experience with requirements analysis
    •Test experience as it pertains to code inspection for style, functionality and requirements compliance
    •Strong familiarity with qualification methods (DO-178B or DO-178C)
    •Highly motivated individual with the ability to work off shift and weekend hours if needed
    •Ability to interpret Interface Design Descriptions and Software Requirements
    •Experience with C programming using a Windows environment (C++, Java, XML, Visual Basic, or Assembly)
    •Ability to work with little supervision cooperatively with all personnel in the organization
    •Demonstrate proactive ownership of issues and problems
    •Proficiency in Microsoft Office software including Word, Excel, PowerPoint, Visio
    •Must have Bachelor’s degree in Software/Computer/Electrical Engineering or Computer Science
    •Must have a minimum of 5 years experience in software design and/or software test engineering
    •Knowledgeable in both structured and object-oriented programming techniques
    •U.S. Citizenship required.



    Basic Qualifications:


    •Must have Bachelor’s degree in Software/Computer/Electrical Engineering or Computer Science
    •Must have a minimum of 5 years experience in software design and/or software test engineering
    •Knowledgeable in both structured and object-oriented programming techniques
    •Experience with National Instruments LabVIEW graphical development environment
    •Familiarity with Microsoft Project
    •This position requires the ability to lift up to 20 lbs. on an occasional basis. This position may require frequent sitting, standing and/or walking.
     
    Job Number: 50421
    Job Location: Danbury, CT
    Rate: $50-65/hour
    Per Diem: Possible
    Overtime: Possible
    Duration: 6+ months
    Start Date: 1/16/2017
    Input Date: 11/14/2020
    Firm Name: BUTLER AEROSPACE & DEFENSE
    Attention: Laura Leszek
    Address: SHELTON POINTE STE 204
    2 TRAP FALLS ROAD

    City, State: SHELTON, CT 06484
    Phone: 203/926-2705
    Website: www.butler.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Software Design Engineer NY

    Description:
    Job Title: Software Design Engineer
    Job Number: 157726/4394
    Location: East Aurora, NY
    Compensation: 45/hr
    Assignment Length: 8 month contract


    Description:

    This position is responsible for planning and executing the development and test of control software that will be embedded in new Moog products, in accordance with Moog’s Organizational Standard Software Process (OSSP), and within the cost and schedule constraints established for the project. The software design engineer is a trained professional who determines the approach necessary to resolve technical challenges.
    Essential job functions: 1. Delivery of executable software that meets performance requirements, as demonstrated by validating and verifying the software per Moog’s OSSP.
    2. Delivery of other software work products (documentation) that meets contractual requirements and in conformance with Moog’s OSSP.
    3. Perform project planning and oversight according to Moog’s OSSP, and provide status reporting management during project execution.
    4. On larger projects, lead a small team of other software engineers to accomplish a portion of the software development work, e.g., low-level design, code, or test.
    5. Control software project cost through reporting of earned value management data, and reporting scope changes to project management.
    6. Control software project schedule through reporting of earned value management data, making sure that critical dependencies on other groups are part of the project’s Master Schedule, and by being responsible for delivering software work products on time.
    7. Aid in the ongoing improvement of Moog’s OSSP by suggesting improvements, reporting metrics, and participating on Process Improvement Teams.
    Required skills: Labview programming experience a MUST HAVE
    Scope:
    Education: • Bachelor of Science degree in the field of Electrical, Computer, or Software Engineering, plus a minimum of 5 years’ experience in the design/development/test of real-time control software

    • Bachelor of Science degree in other engineering fields, and Computer Science, may be considered with appropriate additional experience in the design/development/test of real-time control software.
     
    Job Number: MB-4394
    Job Location: East Aurora, NY
    Rate: 45/hr max
    Duration: 8 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Software Developer - Scrum

    Description:
    Lead Test team in Agile Scrum environment

    * Create and design the automated testing framework and strategies

    * Work with testers and subject matter experts to identify and develop test scenarios and test cases

    * Review and Approve all test approaches and maintenance plans for automated test scripts to ensure test coverage for all applications is complete and planned activities meet criteria

    * Develop and enforce best practices and standards for all automation activities.

    * Create, monitor and manage all automated software tool configurations, including IDs, connections, licenses, and permissions.

    * Produce testing metrics and manage communications to management

    * Provide support to teams using Test Tools

    * Prepare Test plan and Test Summary Report

    * Prepare the test cases based on the requirements

    * Prepare Traceability Matrix

    * Owns all ALM activities, IT/QT, validation and quality cycles across environments

    * Defining the scope of testing within the context of each release.

    * Sets up test data as per pre-requisites identified in a test case

    * Assists Testers during Test execution, hands-on

    * Validate the test results

    * Responsible for Defect Management and Test Management

    * Ensuring compliance of the project as per internal and external processes

    * Prepares test cases and scripts for Reports testing

    * Sets up test data as per pre-requisites identified in a test case

    * Executes the test cases as per test steps defined

    * Ensures to update the requirements traceability matrix

    * Captures test evidence and documents test results

    * Logs and tracks the defects and capture test evidence and test results

    * Ensures all the defects are closed

    * Re-tests post defect fix

    * Perform other support activities for user experience or testing activities.
     
    Job Number: RT358181
    Job Location: Orlando, FL
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: CDI CORPORATION
    Attention: Richard Thorn
    Address: 17177 PRESTON RD STE 300
    City, State: DALLAS, TX 75248
    Website: www.cdicorp.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Software Developers - Anaheim, CA

    Description:
    STS AeroStaff Services is currently hiring Software Developers for open positions in Anaheim, California.

    Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

    Duties:

    • Analyzes, installs, tests Enterprise-wide COTs business applications such as Deltek Costpoint or other Enterprise Resource Planning applications and assists end-users in system execution.
    • This technical position also includes development of Web Based applications using C# in .NET, MS Access, TSQL and customized business reports using Cognos Business Intelligence Software application.
    • Applies current graphics design and .NET technologies to develop, modify, maintain SharePoint environment.
    • Participates in the testing process through test review and analysis, test witnessing and certification of software.
    • Relies on experience and judgment to plan and accomplish goals.
    • Work with project stakeholders on a daily basis.
    • Works under only general direction, independently determines and develops approach to solutions.
    • Frequent inter-organizational and outside customer contracts.
    • Represents the organization in providing solutions to difficult technical issues associated with specific projects.
    • Work is reviewed upon completion for adequacy in meeting objectives.
    • Contributes to the completion of specific programs and projects.

    Qualifications:

    • Position requires a Bachelor or Master’s Degree in MIS, CIS, CSC or related discipline, plus 5 to 7 years’ experience.
    • Experience programming in .NET 3.5, C#, ASP.NET ,T-SQL, C/C++, XLM.
    • Experience with SharePoint Designer, InfoPath, Web Parts, and workflow creation.
    • Experience as a SharePoint Developer in the analysis, design, hands-on development and delivery of web-based applications.
    • Experience using jQuery, Client Object Model, and Service Oriented Architecture.
    • Experience with SharePoint’s application services framework including implementation, configuration, and usages of Search, Managed Metadata, and User Profile Services.
    • Attention to detail and commitment to high quality/error free deliverables.
    • A certain degree of creativity and latitude is required.
    • Must be motivated, independent and self-sufficient - able to receive an assigned task and see it through to completion with minimal supervision.
    • Ability to write Stored Procedures, write complex SQL queries, and ability to analyze the SQLdata is desired.
    • Experience with SQL Server Reporting Services, SQL Server Analysis Services, and/or SQL Server Integration Services a plus.
    • Microsoft MCPD 70-576, SharePoint 2010/2013 Designing and Developing Applications certification is a plus but not required.

    Benefits:

    STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

    We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

    Thanks for taking the time, and we look forward to hearing from you soon.
     
    Job Number: 37228
    Job Location: Anaheim, CA
    Rate: DOE
    Per Diem: No
    Overtime: Possible
    Duration: Temp
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STS AEROSTAFF SERVICES
    Attention: STS AeroStaff Services
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 800/800-2400
    Website: www.stsaviationgroup.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Software Engineer - Level 3 with active secret FL

    Description:
    1239
    Title: Software Engineer - Level 3
    Orlando FL
    80/hr max
    Active secret to start

    Description
    Software engineer with experience in embedded C++ and C software development with Linux operating systems running on multi-core processor in a multi-threaded application. Analyze existing software for reuse and implement complex algorithms. Understanding and modification of kernel software, device drivers, and core thread management desired. Use and development of automated testing desired as well as prior development of safety significant software. Understanding of network programming (TCP/IP), UDP. Experience with FACE architecture concepts desired. Candidate will need to apply appropriate standards, processes, procedures, and tools throughout the software life cycle.

    Skill/Experience/Education
    Mandatory:

    Embedded programming experience in C and C++
    Embedded programming experience in a Linux environment
    Secret Security Clearance
     
    Job Number: DW-1239
    Job Location: Orlando, FL
    Rate: 80/hr max
    Duration: 12 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Software Engineer - Secret Clearance

    Description:
    Required Skills:

    • Minimum 8 years of Professional Software development experience

    • At least 5 years of C, C++, or JAVA experience

    • At least 2 years of OOAD experience

    • At least 2 years of experience with Model Driven Development

    • At least 2 years of UML experience

    • Experience with Real-time operating systems (RTOS), embedded programming, processor/board architecture and design. Knowledge of UNIX, Linux, Windows, VxWorks or other Real time operating systems

    • Must have an existing Secret security clearance

    Desired Skills: • SATCOM domain knowledge • Model Driven Development • Understanding of standard system engineering design artifacts such as Use Cases and SysML diagrams • Applied experience in Unified Modeling Language (UML) and Service Oriented Architecture (SOA) principles • Experience with Agile lifecycle process including Scrum, Continuous Integration, and Test Driven Development Methodologies • CORBA • DOORS
     
    Job Number: RT358187
    Job Location: Marlborough, MA
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: CDI CORPORATION
    Attention: Richard Thorn
    Address: 17177 PRESTON RD STE 300
    City, State: DALLAS, TX 75248
    Website: www.cdicorp.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Software Engineer II - ACTIVE SECRET CLEARANCE

    Description:
    ACTIVE SECRET CLEARANCE REQUIRED TO START.

    Mission Systems needs experienced software engineers to assist with the development of real-time software systems including: developing and maintaining code and integrating software components into a fully functional software system and assisting with testing. ADA, C++.

    Bachelor's degree and typically 2 or more years' experience in an engineering classification or a Master's degree with experience in an engineering classification. Required: Bachelor or Master degree from an accredited course of study, in engineering.
     
    Job Number: SWIImo
    Job Location: Hazelwood, MO
    Rate: OPEN
    Per Diem: YES
    Overtime: Possible
    Duration: 12+ Months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INNOVA SOLUTIONS, INC
    Attention: Janice Plattner
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.innovasolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Software Engineer IV (OK) ACTIVE SECRET

    Description:
    Leads activities to develop, document and maintain architectures, requirements, algorithms, interfaces and designs for software systems. Leads development of code and integration of complex software components into a fully functional software system. Develops software verification plans, test procedures and test environments, executing the test procedures and documenting test results to ensure software system requirements are met. Provides technical leadership for software projects and leads software supplier management activities. Leads development, selection, tailoring and deployment of processes, tools and metrics. Plans, executes and documents software research and development projects. Serves as a subject matter expert for software domains, system-specific issues, processes and regulations. Tracks and evaluates software team and supplier performance to ensure product and process conformance to project plans and industry standards.

    Ada experience, Unix development, Green Hills Real Time Operating System (RTOS) target, real-time avionics software development experience, display design experience using Open GL, CVS, Clearcase, and ClearQuest preferred.

    Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
     
    Job Number: SWOK
    Job Location: Tinker AFB, OK
    Rate: OPEN
    Per Diem: YES
    Overtime: Possible
    Duration: 4-5
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INNOVA SOLUTIONS, INC
    Attention: Janice Plattner
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.innovasolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Software Engineer Level 3 with active secret FL

    Description:
    Job Title: Software Engineer Level 3
    Job Number: 158185/1238
    Location: Orlando, FL
    Compensation: 80/hr
    Assignment Length: 12 month contract
    Secret Clearance

    Description:


    Description
    Design, code, test and integrate real-time embedded software for selected program applications. Incorporate new capabilities, modify existing capabilities and correct issues that have been identified. Proficient debug and problem solving skills are needed along with the ability to implement and understand real-time embedded code. Candidate should have experience with high level programming languages (C,C++), as well as familiarity with PC and/or Linux based development environments.

    Skill/Experience/Education
    Mandatory:

    Embedded programming experience in C++
    Secret Security Clearance
     
    Job Number: DW-1238
    Job Location: Orlando, FL
    Rate: 80/hr max
    Duration: 12 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Software Engineer with active secret / flight control analysis software skills required CA

    Description:
    Lockheed Martin Aero 0355
    Job Title: Software Engineer
    Location: Palmdale, CA
    Compensation: 60-70/hr
    Assignment Length: 4 month contract
    Security Clearance Secret (Prime Contract:, Can start w/o clearance: No, Interim Clearance Sufficient: No)
    1st shift
    Non exempt

    Description:

    This Flight Controls lead position is a technical position performing complex guidance and control design and analysis for LM Aero - Advanced Development Programs.

    Responsible for guiding the design, development, integration and test of flight control laws.

    Must have demonstrated working knowledge of flight control system architecture, autonomous control algorithms & analysis, system integration, and test of vehicle systems.

    Prior experience in hypersonic flight regime is highly desired.

    Must have a good understanding of aircraft stability, control and aerodynamic characteristics.

    Strong system engineering experience and the ability to mechanize the requirements for Guidance, Navigation and Control systems is highly desired.

    The selected candidate will represent the program as a technical subject matter expert within the field of flight controls and will interact with senior leadership, customer and suppliers at program meetings.

    Skill/Experience/Education
    Mandatory:

    Current SECRET clearance with ability to obtain SAP/SAR access

    Bachelor's Degree in Electrical, Mechanical or Aerospace Engineering.

    Minimum 10+ years of hands-on experience in the design of flight control laws (algorithms & software) for aviation applications.

    Proficient with simulation/control laws (6-degree-of-freedom)development tools, aircraft/system modeling and Matlab/Simulink software.

    Desired:

    Demonstrated experience in all phases of flight control laws design life cycle - from requirements development, conceptual design, detailed design, code generation, software verification & validation, ground test and flight test phases.

    Knowledge and experience in Guidance and Control Algorithm design and implementation for high speed weapons.
    Familiarity with flight worthy software development process.
     
    Job Number: SW-0355
    Job Location: Palmdale, CA
    Rate: 60-70/hr DOE
    Duration: 4 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Software Engineer with active secret CA

    Description:
    Lockheed Martin Aero 0353
    Job Title: Software Engineer
    Location: Palmdale, CA
    Compensation: 60-70/hr
    Assignment Length: 4 month contract
    Security Clearance: Secret (Prime Contract:, Can start w/o clearance:No, Interim Clearance Sufficient:No)
    Non Exempt
    1st shift

    Description:

    This GN&C engineer position is with our Historic Skunk Works in Palmdale, California.

    This is a technical position performing complex guidance and control design and analysis for precision guided munition systems. Job responsibilities include GNC System design, analysis, modeling, and simulation.

    Apply knowledge of guidance, navigation, and control theory to develop optimum trajectory guidance laws.

    Develop autopilot control laws (modern and classical). Develop guidance algorithms and conduct flight system performance analysis including nonlinear modeling, digital control, and system effectiveness analysis.

    Apply digital signal processing techniques and navigation system error analysis to verify sensor and filter performance.

    Perform post flight reconstruction and analysis.

    Develop, modify, and maintain software tools. Perform research and prepare presentations and reports.

    Skill/Experience/Education
    Mandatory:

    Current SECRET and ability to obtain a SAP/SAR clearance

    MATLAB/Simulink

    Master's Degree in Electrical, Mechanical or Aerospace Engineering or Applied Mathematics or Applied Physics 7+ years of experience in Guidance, Navigation or Controls theory and analysis.

    Desired:

    Demonstrated track record developing advanced autopilots, guidance laws and Kalman Filtering.
     
    Job Number: DW-0353
    Job Location: Palmdale, CA
    Rate: 60-70/hr DOE
    Duration: 4 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Software Engineer with active secret CA

    Description:
    Lockheed Martin Aero 0354
    Job Title: Software Engineer
    Location: Palmdale, CA
    Compensation: 60-70/hr
    Assignment Length: 4 month contract
    Security Clearance Secret (Prime Contract:, Can start w/o clearance:No, Interim Clearance Sufficient:No)
    Non exempt
    1st shift


    Description:

    This position supports Guidance, Navigation and Control (GN&C) efforts including day to day coordination between the program teams responsible for these combined efforts. Responsibilities also include integration and coordination with software design, implementation, and systems integration teams. Tasking also includes reporting to Technical Management and Cost Account Manager responsible for subsystem architecture and vehicle management (which includes software, guidance and control design and analysis). Must have demonstrated working knowledge of flight control system architecture, autonomous control algorithms & analysis, system integration and test. Requires knowledge and experience in Navigation design and implementation and knowledge and experience in seeker/radar integration into Navigation solution and Kalman filter design, trades and performance.

    Strong system engineering experience and the ability to mechanize the requirements for Guidance, Navigation and Control systems is highly desired. Prior experience in hypersonic flight regime is highly desired. The selected candidate will participate in addressing GN&C direction with senior leadership and the customer at program meetings.

    Skill/Experience/Education
    Mandatory:

    Current SECRET clearance
    MATLAB/Simulink
    Bachelor's Degree in Electrical, Mechanical or Aerospace Engineering and several years of related experience. Hands on experience in the design of flight control laws. Must have a good understanding of aircraft stability, control, and aerodynamics.
    Desired:

    Proficient with 6-degree-of-freedom simulation/control laws development tools, aircraft/system modeling and Matlab/Simulink software
     
    Job Number: DW-0354
    Job Location: Palmdale, CA
    Rate: 60-70/hr DOE
    Duration: 4 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Software Engineer with active secret MA

    Description:
    Job Title: Software Engineer CLearance
    Job Number: 157922/6545066
    Location: Marlborough, MA
    Compensation: 94/hr
    Assignment Length: 6-12 month contract


    Description:

    Required Skills:
    • Minimum 8 years of Professional Software development experience
    • At least 5 years of C, C++, or JAVA experience
    • At least 2 years of OOAD experience
    • At least 2 years of experience with Model Driven Development
    • At least 2 years of UML experience
    • Experience with Real-time operating systems (RTOS), embedded programming, processor/board architecture and design. Knowledge of UNIX, Linux, Windows, VxWorks or other Real time operating systems
    • Must have an existing Secret security clearance to Start

    Hours: 8:00am to 5:00pm
    Location: MA804 1001 Boston Post Road Building 4 Marlborough MA

    Desired Skills:
    • ATCOM domain knowledge
    • Model Driven Development
    • Understanding of standard system engineering design artifacts such as Use Cases and SysML diagrams
    • Applied experience in Unified Modeling Language (UML) and Service Oriented Architecture (SOA) principles
    • Experience with Agile lifecycle process including Scrum, Continuous Integration, and Test Driven Development Methodologies
    • CORBA
    • DOORS
     
    Job Number: MB-6545066
    Job Location: Malborough, MA
    Rate: 94/hr max
    Duration: 12 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Software Engineers - Many Needed - HOT****

    Description:
    **Must have active secret clearance
    **C++
    **Degreed
    Job Description: Boeing Military Aircraft - Mission Systems needs experienced software engineers to assist with the development of real-time software systems including: developing and maintaining code and integrating software components into a fully functional software system and assisting with testing. Activities may also include developing, documenting and maintaining complex architectures, requirements, algorithms, interfaces and designs for software systems, as well as developing software verification plans, test procedures and test environments, executing the test procedures and documenting test results to ensure software system requirements are met.

    Email resume to: Mary Ann McCarthy mmccarthy@pdstech.com
     
    Job Number: Boe-Soft
    Job Location: St. Louis, MO
    Rate: 70.00-85.00
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PDS TECH COMMERCIAL, INC
    Attention: Mary Ann McCarthy
    Address: 1215 FERN RIDGE PKWY STE 231
    City, State: ST LOUIS, MO 63141
    Phone: 314/628-9143
    800 Phone: 800/472-3737
    Fax Phone: 314/628-9485
    Website: www.pdstech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Software Engineers - Real Time Embedded

    Description:
    **Must have Active Secret clearance
    *Experience required with developing real-time embedded software in C++ and/or Ada.
    *Object Oriented Analysis and Design using UML
    *The successful candidate can expect simulation and modeling assignments in one or more of the following areas: RF and IR signatures, Electronic Warfare, Aircraft and associated Avionics for man-in-the-loop simulation, Aircraft Control and Propulsion Systems, air-to-air and/or surface-to-air missiles, air-to-ground weapons, missile control systems, expendable countermeasures, ground-based early warning, acquisition, and tracking radars.
     
    Job Number: Lock-Soft
    Job Location: Marietta, GA
    Rate: $70.00-$75.00/hour
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PDS TECH COMMERCIAL, INC
    Attention: Mary Ann McCarthy
    Address: 1215 FERN RIDGE PKWY STE 231
    City, State: ST LOUIS, MO 63141
    Phone: 314/628-9143
    800 Phone: 800/472-3737
    Fax Phone: 314/628-9485
    Website: www.pdstech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Software Supplier Manager

    Description:
    The responsibilities of the Software Supplier Manager include:
    1. Review supplier’s software plans to ensure that they meet the requirements of their statement of work.
    2. Ensure supplier executes to the contracted schedule. Work with the supplier to develop alternate execution plans for issues that will impact schedule commitments.
    3. Participate in supplier software technical reviews and audits and witness formal software test activities.
    4. Analyze supplier software metrics assessing the supplier’s software status and present status to management.
    5. Work with suppliers to deliver software products in accordance with schedule, quality and technical performance requirements as identified by the contract
    6. Review of software requirements and test documents to ensure compliance with the contract and approved software plans.
    7. Act as the software representative in the Supplier IPT meetings.

    Experience - 7-10 years of experience in Program Engineering Management and Program Management. Experience with FAA Certification and RTCA/DO-178B a plus.

    Seeking a highly motivated, flexible individual that is customer and results focused. Excellent written and oral communication, presentation, inter-personal and organizational skills are required.
    International travel to Turkey required.
     
    Job Location: Stratford, Ca.
    Rate: $46-48.00 Hr
    Per Diem: If Qualified
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Linda Peck
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Software/Computer Automation Engineer - RM

    Description:
    Johnson Service Group is seeking a Software/Computer Automation Engineer for a 12+ month contract opportunity in Stratford, CT!

    No Corp to Corp or H1b sponsorship.

    Job Description:

    Perform duties associated with implementing electrical design software tools including CATIA V6 as well as enhancements to CCD/CADEX. Specific duties include:
    Managing project schedule performance and briefing senior management.
    Performing or contracting upgrades of automation code written for CATIA V5 to work with CATIA V6.
    Writing requirements documents for automation code.
    Managing test plans and validation of requirements completion.
    Performing design processes in CATIA V6 and documenting process steps.
     
    Job Number: 352701
    Job Location: Stratford, CT
    Rate: Open
    Per Diem: yes
    Overtime: yes
    Duration: 12 months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Richard Martinsen
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    St. Louis, MO - Design Engineers Needed with Active Secret Clearance

    Description:
    7 Design Engineers Needed with Active Secret Clearances.

    MUST have Active Secret Clearance with investigation completed or refreshed within the last 5 years.

    Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components. Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers).
    Develop design data for aircraft structural components, systems components, assemblies and installations.
    Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
    Mentor associate structural engineers.
    Maintains a current knowledge of developments in aircraft structures.
    Participates in projects to improve productivity and financial performance.
    Perform other job duties as assigned.

    Qualifications:
    Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience.
    Minimum 8 years engineering experience.
    Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000).
    Experience with Team Center & Enovia is a plus.
    Attention to detail of completed designs is critical. Ability to work with cross functional teams required.
    Proficient at producing high quality designs within schedule and budget.
    Must be able to work in team environment.
    Must be able to work overtime and weekends as required.
    Required:
    Must have Active Secret Clearance with investigation within the last 5 years
    Composite experience

    The Structures Company is an AA/EOE.
     
    Job Location: St. Louis, MO
    Rate: $60-70/hr DOE
    Per Diem: Yes
    Overtime: Yes
    Duration: Long-term
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Chris Sheets
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Structural & Payload Design Engineer 3

    Description:
    Please call or email Holly Herrera at 253-455-3711 or hherrera@iconma.com

    Structural & Payload Design Engineer 3
    Location: Berkeley, MO
    Duration: 1 year

    Job Description:
    Develops, integrates and documents structural and interior payload system requirements to establish the system design. Develops, maintains and modifies structural and interior payload system and component designs, using 3-D Computer Aided Design tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle. Performs, integrates analytical and test results to validate and verify systems and components meet requirements and specifications. Manages supplier development, test and production activities and coordinates with the supplier to optimize the design and achieve program goals. Develops new design/analysis processes and tools to improve the effectiveness, quality and efficiency of the development effort. Investigates emerging technologies to develop concepts for future product designs to meet projected requirements. Works under general direction.

    Education / Experience:
    - Bachelor's degree in Engineering from an ABET accredited university and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

    Additional Comments:
    - Engineering degree and at least 5 years of experience performing 3D modeling in NX (formerly Unigraphics) with the use of Team Center Engineering is preferred.
    - F/A-18 E/F and/or structural retrofit design experience is desired.
    - Must stay within BMA rate structure.

    Skill Code:
    - 647-Structural Design

    Required Skills:
    Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

    Skills:
    Category Name Required
    Areas of Expertise 3D Models No
    Software Skills Unigraphics No

    Required:
    - Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
     
    Job Number: 23196-1
    Job Location: Berkeley, MO
    Per Diem: YES
    Duration: 12 months
    Input Date: 11/14/2020
    Firm Name: ICONMA LLC
    Attention: Holly Herrera
    Address: 859 STEPHENSON HWY
    City, State: TROY, MI 48083
    Phone: 843/955-9221
    Website: www.iconma.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Structural & Payload Design Engineer 3 / Unigraphics

    Description:
    Must have the ability to qualify for secret clearance

    Required: Minimum of a Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

    Job Scope: Software Skills Unigraphics

    Develops, integrates and documents structural and interior payload system requirements to establish the system design. Develops, maintains and modifies structural and interior payload system and component designs, using 3-D Computer Aided Design tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle. Performs, integrates analytical and test results to validate and verify systems and components meet requirements and specifications. Manages supplier development, test and production activities and coordinates with the supplier to optimize the design and achieve program goals. Develops new design/analysis processes and tools to improve the effectiveness, quality and efficiency of the development effort. Investigates emerging technologies to develop concepts for future product designs to meet projected requirements. Works under general direction.
     
    Job Number: TG UG
    Job Location: St Louis, MO
    Rate: Up to $45 Per Hour DOE
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: TRIAD SYSTEMS
    Attention: Todd Gerber
    Address: 23801 CALABASAS RD STE 2022
    City, State: CALABASAS, CA 91302
    Phone: 818/222-6811
    800 Phone: 800/820-6811
    Fax Phone: 818/222-0116
    Website: www.triadsystems.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Structural & Payload Design Engineer 4

    Description:
    Please call or email Holly Herrera at 253-455-3711 or hherrera@iconma.com

    Structural & Payload Design Engineer 4
    Location: Berkeley, MO
    Duration: 12 months


    Description: Develops, integrates and documents structural and interior payload system requirements to establish the system design. Develops, maintains and modifies structural and interior payload system and component designs, using 3-D Computer Aided Design tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle. Leads performance, integration and analysis of tests to validate and verify systems and components meet requirements and specifications. Manages supplier development, test and production activities and coordinates with the supplier to optimize the design and achieve program goals. Assists with investigation of emerging technologies to develop concepts for future product designs to meet projected requirements. Works under minimal direction. Education / Experience: Bachelor's in Engineering from an ABET accredited university and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. Skills: Category Name Required Areas of Expertise 3D Models No Software Skills Unigraphics

    No Additional Comments: Engineering degree and 9 years of experience performing 3D modeling in NX (formerly Unigraphics) with the use of TeamCenter Engineering is preferred. F/A-18 E/F and/or structural retrofit design experience is desired.
     
    Job Number: 23213-1
    Job Location: Berkeley, MO
    Duration: 12 months
    Input Date: 11/14/2020
    Firm Name: ICONMA LLC
    Attention: Holly Herrera
    Address: 859 STEPHENSON HWY
    City, State: TROY, MI 48083
    Phone: 843/955-9221
    Website: www.iconma.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Structural / Stress Engineer

    Description:
    JSG is seeking a Structural Ground Test Engineer for a 2- year contract opportunity in Stratford, CT!!!

    Description:
    Structural Ground Test (GT) Engineers are responsible for projects with significant scope and complexity covering the structural aspects of Ground Testing helicopter components and systems.
    Test programs typically involve full scale fatigue and static evaluations of dynamic components, airframe static tests, and airframe shake tests.
    A large part of our function is fatigue substantiation which correlates laboratory fatigue test strength data with measured flight test loads and the customer's mission spectrum to produce dynamic component retirement times and/or inspection intervals that reduce the chance of catastrophic fatigue fracture to an extremely remote possibility.
    To that end, Structural GT engineers are in charge of the entire fatigue test program including detailed test planning, facilities, test specimens, instrumentation, test conduct, post-processing data, substantiation analysis using customized software tools, and generation of test plans and reports.

    Tasks also include supporting and establishing operating limitations for both flight test programs and fielded aircraft.
     
    Job Number: 353698
    Job Location: Stratford, CT.
    Rate: Open
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 2 Years
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Linda Peck
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Structural Analysis Engineer

    Description:
    Leads development, integration and documentation of structural requirements to establish the system design. Coordinates with other engineering groups to establish the product''s environment. Guides product design and verifies structural integrity by using and developing analytical methods, finite element models/simulations and other analysis tools throughout the product lifecycle to develop the structural environment, characteristics and performance. Leads development of test plans and configurations, supports test execution and analyzes/reports test results to validate and verify systems and components meet requirements and specifications. Defines and documents certification and test results to substantiate for customers and regulatory agencies that requirements are satisfied. Supports in-service products by leading investigations into failures and analyzing improvements. Develops analytical processes/tools to improve effectiveness, quality and efficiency of the development effort. Works under minimal direction.

    Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

    Software Skills Finite Element Analysis (FEA)
    Technical Skills Stress Analysis
    Technical Skills Unigraphics
     
    Job Location: MO
    Rate: 56/hour
    Per Diem: split
    Overtime: possible
    Duration: 6 months
    Start Date: 1/2017
    Input Date: 11/14/2020
    Firm Name: APOLLO PROFESSIONAL SOLUTIONS
    Attention: Erica Price
    Address: WESTRIDGE OFFICE PARK
    2646 HIGHWAY 109 STE 207

    City, State: WILDWOOD, MO 63040
    Phone: 636/438-0312
    800 Phone: 866/277-3343
    Fax Phone: 636/220-8284
    Website: www.apollopros.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Structural Analysis Engineer 2

    Description:
    Please call or email Holly Herrera at hherrera@iconma.com OR 253-455-3711.

    Structural Analysis Engineer 2

    Location: Mesa, AZ
    Duration: 3 Months

    Description:
    Work experience
    - Experience in modeling and analysis is required.
    - Knowledge of fundamentals of vibration engineering and finite element methodology is required.
    - Familiarity with NASTRAN and PATRAN for dynamic analysis is preferred.
    - Experience in engineering testing is a plus.

    Primary Responsibilities:
    - Generate dynamic NASTRAN models of aircraft components.
    - Run dynamic analysis, identify modal shapes and frequencies
    - Perform on ground dynamic testing.
    - Use test results to modify/verify analysis.
    - Use model to estimate vibration induced deflections and stresses
    - Identify locations for in-flight vibration data acquisition
    - Monitor flight & gunfire testing when vibration data is collected
    - Evaluate the soundness of vibration data.
    - Reduce vibration data and perform spectral analysis.

    Education:
    - B.S. or M.S. degree in aerospace or mechanical engineering or equivalent technical training.

    Skill Code:
    698-Loads and Dynamics Structural Anal

    Skills:
    Category Name Required
    Software Skills Nastran Yes
    Software Skills Patran Yes

    Education / Experience:
    Bachelor's degree and typically 2 or more years' experience in an engineering classification or a Master's degree with experience in an engineering classification.

    Required:
    Bachelor or Master degree from an accredited course of study, in engineering, com
     
    Job Number: 24112-1
    Job Location: Mesa, AZ
    Per Diem: Yes
    Overtime: Yes
    Duration: 3 months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: ICONMA LLC
    Attention: Holly Herrera
    Address: 859 STEPHENSON HWY
    City, State: TROY, MI 48083
    Phone: 843/955-9221
    Website: www.iconma.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Structural Analysis Engineer with active secret / NASTRAN PATRAN FEA Catia CA

    Description:
    Job Title: Structural Analysis Engineer
    Job Number:156325/0316
    Location: Palmdale, CA
    Compensation: Rates 85-95/hr
    Assignment Length: 12+ month contract
    Active Secret security clearance with an investigation less than 5 years ago
    Non Exempt

    Job Description:
    This position requires an Aircraft Stress Analyst to use their technical expertise to perform analysis of aircraft primary and secondary structure. The candidate will have a complete understanding and wide application of technical principles, theories and concepts in the field of aircraft structural analysis. The candidate will be expected to work independently with only general oversight and will be required to provide guidance to junior engineers. The candidate will be responsible for documenting work clearly and concisely.


    Mandatory Skills:
    --Active Secret security clearance with an investigation less than 5 years ago.--
    --Must be a US Citizen or legally authorized to work in US as a permanent resident. This position is located at a facility that requires special access--Bachelor OR Above Degree in a Engineering Technical Discipline--5 or more years experience in the analysis of aircraft structures--Experience performing stress analysis by hand calculations--Experience building complex finite element models for stress analyses--Knowledge of aircraft stress analysis methods and basic structural design criteria--Familiarity with CATIA V5--Understanding of drawing practices, material properties, and manufacturing processes


    Desired Skills:
    Proficiency with SLIM/TMP VIsion, Microsoft Office suite (Word, PowerPoint, Excel, Outlook), Windows and LINUX/UNIX operating systems, and computer programming experience in FORTRAN, VBA, C/C++ and PERL.




    Skill Matrix
    Skill Name Description Level (1-5, 5 being the highest)
    1 2 3 4 5 Years Mandatory(Yes/No)
    PATRAN Proficiency in FEA pre-processing software PATRAN 4-5 Years Yes
    CATIA V5 Proficiency in CAD software CATIA V5. 0-3 Years No
    NASTRAN Proficiency in FEA solver NASTRAN 4-5 Years Yes
    Stress Hand Calcs Proficiency in Stress analysis using hand calculations 4-5 Years Yes
     
    Job Number: DW-0316
    Job Location: Palmdale, CA
    Rate: 85-95/hr max
    Duration: 12 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Structural Design with active secret / Catia V5 URGENT CA

    Description:
    Job Title: Structural Design
    Job Number:156326/0317
    Location: Palmdale, CA
    Compensation: Rates 65-75/hr
    Assignment Length: 10+ month contract
    Active Secret Clearance with investigation less than five years ago
    Non Exempt
    (Start date in March 2017 after obtaining Special Program Clearance)



    Job Description:
    Design of structural detail parts, assemblies and installations, as well as, systems installations for aircraft. Engineer shall be responsible for development of layouts, preparation of engineering drawings, planning, scheduling, and coordination of activities of assigned subordinate engineers, and support of manufacturing operations and customers in resolving technical problems related to the aircraft structure and systems. Candidate must be able to coordinate efforts with little or no supervision across a wide range of functional organizations, such as Planning, Tooling, Stress, M&P, R&M, Material, Flight Sciences, Test, Manufacturing, and other Design IPTs to ensure that designs meet customer and derived requirements. Candidate must have aerospace design experience with knowledge of configuration management techniques, drafting/drawing conventions, and aerospace specifications and procedures.


    Mandatory Skills:
    --Active Secret security clearance with an investigation less than 5 years ago.--Must be a US Citizen or legally authorized to work in US as a permanent resident. This position is located at a facility that requires special access--Bachelor OR Above Degree in a Engineering Technical Discipline--5 or more years experience in the analysis of aircraft structures--Proficient with CATIA V5--Understanding of drawing practices, material properties, and manufacturing processes


    Desired Skills:
    Proficiency with Microsoft Office suite (Word, PowerPoint, Excel, Outlook), Windows

    Skill Matrix
    Skill Name Description Level (1-5, 5 being the highest)
    1 2 3 4 5 Years Mandatory(Yes/No)
    CATIA V5 Proficiency in CAD software CATIA V5. 4-5 Years Yes
    Aircraft Structural Design Proficient with aircraft structural design of composite and metallic parts 4-5 Years Yes
     
    Job Number: DW-0317
    Job Location: Palmdale, CA
    Rate: 65-75/hr max
    Duration: 10 months +
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Subsystems Engineer with active secret / Catia V5 CA

    Description:
    Job Title: Subsystems Engineer
    Job Number: 157859/0372
    Location: Palmdale, CA
    Compensation: 65-75/hr max
    Assignment Length: contract
    Active Secret security clearance with an investigation less than 5 years ago


    Description
    Candidate will be responsible for the structural design, installation, and integration for various structure and subsystems on a unique aircraft. Engineer must be capable of taking structural design and systems/subsystems requirements and developing installation designs including line replaceable units to antenna separation, bonding requirements, hydraulic, fuel, auxiliary power, and environmental control system tubing and harness routing.. Candidate will be completely responsible for various subsystem LRU's integration into the airplane for installation. They will be expected to identify and coordinate with the affected disciplines from Avionics, Software, Electrical, Structural Design, Material and Process Engineering and develop complete design solutions. Required to create detail designs including 3D lay-outs, assemblies, and installation drawings using CATIA V5. Must create separate detail parts lists to accompany drawings.

    Required Skills
    CATIA V5

    Desired Skills
    GD&T (Geometric Dimensioning and Tolerancing)

    Skill/Experience/Education
    Mandatory:

    --Active Secret security clearance with an investigation less than 5 years ago.
    --5 or more years experience in the design of aircraft primary or secondary structures.
    --Proficient with CATIA V5.
    --Must be a US Citizen or legally authorized to work in US as a permanent resident. This position is located at a facility that requires special access.
    --Understanding of drawing practices, material properties, and manufacturing processes.
    Desired:

    --Bachelor or above Degree in an Engineering Technical discipline.
    --Experience with composite structure design or manufacturing.
    --Experience with hand stress analysis for initial part layout.
    --Experience with GD&T (Geometric Dimensioning and Tolerancing) .
    --Excellent writing and communication skills.

    Skill Matrix
    Skill Name Description Level (1-5, 5 being the highest)
    1 2 3 4 5 Years Mandatory(Yes/No)
    Catia V5 Proficient 4-5 Years Yes
    Structural Design Proficient with aircraft structural design of composite and metallic part 4-5 Years Yes
    Subsystem Design Proficient with installation of aircraft subsystems. 4-5 Years Yes
     
    Job Number: DW-0372
    Job Location: Palmdale, CA
    Rate: 65-75/hr max
    Duration: 12 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    System Safety Engineer

    Description:
    Description: Support lead system safety engineer(s) to promote safety as an attribute of design for complex, safety critical systems under development for the H-60 / Combat Rescue Helicopter product line. Candidates must have experience working with Product Development Teams in order to influence hardware and software design and produce and/or update the following deliverables:

    - Safety Assessment Reports
    - System & Subsystem Safety Analyses
    - Functional Hazard Assessments
    - Hazard Tracking Records

    Duties include applying scientific and engineering principles and experience to identify potential safety hazards and working with engineering disciplines to eliminate and/or mitigate identified hazards.

    The candidate must be able to communicate both verbally, and through written presentations, to the Product Development Teams, Management, and External Customers.

    Candidate must have a working knowledge of MIL-STD-882 and/or SAE ARP4761. Knowledge of AR 385-10, DA PAM 385-16 is a plus. Experience in aviation/rotary wing design, maintenance, and/or operations desired but not essential.
     
    Job Number: 352706
    Job Location: Stratford, Ct.
    Rate: open
    Per Diem: If Qualified
    Overtime: Possible
    Duration: 2 Years
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Linda Peck
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Systems Engineer

    Description:
    Systems Engineer - Level 3 for an opening in Dallas, TX.

    RESPONSIBILITIES:
    Duties include:Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications Position contingent upon upcoming need. Status of clearance needed on resume.

    REQUIRED EXPERIENCE:
    Experience with Requirements Development, Interface Development, or Architectural Design Must be proficient with MS Excel, Word, and PowerPoint. Good communication skills and ability to effectively work with manufacturers and other external part suppliers

    DESIRED EXPERIENCE:
    Familiarity with ground vehicles or related sub-systems. Experience in documenting the system design through block diagrams, product structure, technical reports and similar. Experience in capturing and documenting interfaces at system and subsystem level. Experience in system analysis and decomposition. Experience working in a team, and working with suppliers. Experience with DOORs or similar requirements management tool. Hands on experience integrating hardware to a system. Software requirements decomposition.

    EDUCATION:
    High School Diploma

    WORK HOURS:
    9/80, 1st Shift
     
    Job Number: 161321
    Job Location: Grand Prairie, TX
    Duration: 12 Months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: CHIPTON ROSS
    Attention: Debbie Aubert
    Address: 420 CULVER BLVD
    City, State: PLAYA DEL REY, CA 90293
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Website: www.chiptonross.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Systems Engineer

    Description:
    Applies an interdisciplinary, collaborative approach to plan, design, develop and verify a lifecycle balanced system of systems and system solutions. Evaluates customer and /operational needs to define and coordinate system performance requirements, integrate technical parameters and assure compatibility of all physical, functional and program interfaces. Performs various analyses to optimize total system of systems and/or system architecture. Performs analyses for affordability, safety, reliability, maintainability, testability, human systems integration, survivability, vulnerability, susceptibility, system security, regulatory, certification, product assurance and other specialties quality factors into a preferred configuration to ensure mission success. Develops the planning, organization, implementation and monitoring of requirements management processes, tools, risk, issues, opportunity management and technology readiness assessment processes. Resolves cross-functional technical issues.

    Additionally... V22 Fleet Support Systems Engineer to interface with the customer. Makes customers and their needs a primary focus of one's actions; develops and sustains productive customer relationships; uses information to understand customers' circumstances, problems, expectations, and needs; periodically becomes involved in sharing information with customers to build their understanding of issues and capabilities; considers how actions or plans will affect customers; responds quickly to meet customer needs and resolve problems; assists higher graded employees and/or project team leaders in implementing ways to monitor and evaluate customer concerns, issues, and satisfaction and to anticipate customer needs. Intermediate level proficiency MS Word, MS Excel and MS PowerPoint.

    Candidate must state level of proficiency (beginner, intermediate or advanced) in the following required skills:
    Software Skills MS Excel Yes Intermediate
    Software Skills MS PowerPoint Yes Intermediate
    Software Skills MS Word Yes Intermediate

    Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.
    Additionally...Candidates must have a four year BS degree in an engineering discipline, computer science, mathematics, physics or chemistry. Has a focused aircraft structures background with experience in solving problems related to corrosion prone areas and the ability to offer design solutions or process changes to mitigate aircraft corrosion. Must be US Person for purposes of Export Compliance.
     
    Job Number: 36675
    Job Location: PA
    Rate: 50/hr
    Per Diem: split
    Overtime: possible
    Duration: 6 months
    Start Date: 1/2017
    Input Date: 11/14/2020
    Firm Name: APOLLO PROFESSIONAL SOLUTIONS
    Attention: Erica Price
    Address: WESTRIDGE OFFICE PARK
    2646 HIGHWAY 109 STE 207

    City, State: WILDWOOD, MO 63040
    Phone: 636/438-0312
    800 Phone: 866/277-3343
    Fax Phone: 636/220-8284
    Website: www.apollopros.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Systems Engineer / Systems Safety IV (PA)

    Description:
    Applies an interdisciplinary, collaborative approach to plan, design, develop and verify complex lifecycle balanced system of systems and system solutions. Evaluates customer/operational needs to define and coordinate system performance requirements, integrate technical parameters and assure compatibility of all physical, functional and program interfaces. Performs various analyses to optimize total system of systems and/or system architecture. Performs analyses for affordability, safety, reliability, maintainability, testability, human systems integration, survivability, vulnerability, susceptibility, system security, regulatory, certification, product assurance and other specialties quality factors into a preferred configuration to ensure mission success. Develops, maintains and identifies improvements for the planning, organization, implementation and monitoring of requirements management processes, tools, risk, issues, opportunity management and technology readiness assessment processes. Resolves cross-functional technical issues.

    MORE SPECIFIC QUALIFICATIONS...
    Prefer candidates to have product knowledge and technical acumen in developing and analyzing rotorcraft systems for safety and airworthiness in accordance with the specific customer operational and maintenance context (preferably military).
    Knowledge and experience in developing and conducting a compliant safety management program in accordance government and industry standards to include MIL-STD-882, SAE ARP 4761 and SAE ARP 4754, DO-178B, DO-254 and Def Stan 00-56.
    Working knowledge and experience developing Safety Management Plans and applying aviation related system safety analysis methods to include*:
    _System Safety Risk Assessments
    _Fault-tree Analysis (FTA)
    _Master Minimum Equipment List (MMEL) development
    _Functional Hazard Assessment ( FHA)
    _Operation & Support Hazard Analysis (O&SHA)
    _Safety Assessment Report (SAR)
    _Software Safety Assessment Report.

    *Experience with Reliability & Maintainability-R&M is acceptable; however, candidates must have real experience with SYSTEM SAFETY such as above list in bullets.

    Engineering, or related engineering degree from an ABET accredited school is highly desirable.

    Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering. Additionally...Engineering, or related engineering degree from an ABET accredited school is highly desirable.
     
    Job Number: SystIVPA
    Job Location: Ridley Park, PA
    Rate: OPEN
    Per Diem: YES
    Overtime: Possible
    Duration: 6+ Months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INNOVA SOLUTIONS, INC
    Attention: Janice Plattner
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.innovasolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Systems Engineer III (PA)

    Description:
    Applies an interdisciplinary, collaborative approach to plan, design, develop and verify a lifecycle balanced system of systems and system solutions. Evaluates customer and /operational needs to define and coordinate system performance requirements, integrate technical parameters and assure compatibility of all physical, functional and program interfaces. Performs various analyses to optimize total system of systems and/or system architecture. Performs analyses for affordability, safety, reliability, maintainability, testability, human systems integration, survivability, vulnerability, susceptibility, system security, regulatory, certification, product assurance and other specialties quality factors into a preferred configuration to ensure mission success. Develops the planning, organization, implementation and monitoring of requirements management processes, tools, risk, issues, opportunity management and technology readiness assessment processes. Resolves cross-functional technical issues.
    Additionally...
    Applies an interdisciplinary, collaborative approach to plan, design, develop and verify a lifecycle balanced system of systems and system solutions. Evaluates customer and /operational needs to define and coordinate system performance requirements, integrate technical parameters and assure compatibility of all physical, functional and program interfaces. Performs various analyses to optimize total system of systems and/or system architecture. Performs analyses for affordability, safety, reliability, maintainability, testability, human systems integration, survivability, vulnerability, susceptibility, system security, regulatory, certification, product assurance and other specialties quality factors into a preferred configuration to ensure mission success. Develops the planning, organization, implementation and monitoring of requirements management processes, tools, risk, issues, opportunity management and technology readiness assessment processes. Resolves cross-functional technical issues.

    Preferred product knowledge and technical acumen in developing and analyzing rotorcraft systems for safety and airworthiness in accordance with the specific customer operational and maintenance context (preferably military).
    Experience in developing and conducting a compliant safety management program in accordance government and industry standards to include MIL-STD-882, SAE ARP 4761 and SAE ARP 4754, DO-178B, DO-254 and Def Stan 00-56.
    Experience developing Safety Management Plans and applying aviation related system safety analysis methods to include System Safety Risk Assessments, Fault-tree Analysis (FTA), Master Minimum Equipment List (MMEL) development, Functional Hazard Assessment ( FHA), Operation & Support Hazard Analysis (O&SHA) Safety Assessment Report (SAR), and Software Safety Assessment Report.
    Experience with rotorcraft product and/or product support—a must.
    Preferred- System Safety experience, aerospace experience, aircraft systems, or software. Aerospace experience is desired but not required. Candidates with System Safety experience from other industries will be considered.
    Required Intermediate level Proficiency -Word, Excel and PowerPoint

    Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

    Additionally... BS or MS Engineering Degree or Technical Degree in Systems, Electrical, Aerospace, Mechanical, Software (Computing). Engineering, or related engineering degree from an ABET accredited school is highly desirable.
     
    Job Number: SystEngPA
    Job Location: Ridley Park, PA
    Rate: OPEN
    Per Diem: YES
    Overtime: Possible
    Duration: 6+ Months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INNOVA SOLUTIONS, INC
    Attention: Janice Plattner
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.innovasolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Systems Engineer III (PA) - ACTIVE SECRET

    Description:
    Applies an interdisciplinary, collaborative approach to plan, design, develop and verify a lifecycle balanced system of systems and system solutions. Evaluates customer and /operational needs to define and coordinate system performance requirements, integrate technical parameters and assure compatibility of all physical, functional and program interfaces. Performs various analyses to optimize total system of systems and/or system architecture. Performs analyses for affordability, safety, reliability, maintainability, testability, human systems integration, survivability, vulnerability, susceptibility, system security, regulatory, certification, product assurance and other specialties quality factors into a preferred configuration to ensure mission success. Develops the planning, organization, implementation and monitoring of requirements management processes, tools, risk, issues, opportunity management and technology readiness assessment processes. Resolves cross-functional technical issues.

    Additionally....
    One or more years experience with System Security Engineering. Required Advanced -Systems Security Engineering (SSE). Candidate must have experience with developing and implementing system security engineering tasks related to assessing threats, vulnerabilities and countermeasures for military aircraft systems.
    Should be familiar with system security domains (e.g., information assurance, anti-tamper, intrusion detection, software protection, software assurance, communications security, encryption and key management, network security, reverse engineering, countermeasures, certification and accreditation, special security endorsement) and industry and government guidance and regulations, such as DoD Information Technology Security Certification and Accreditation Process (DITSCAP), which engineers apply to produce secure systems.

    Preferred DOORS (Dynamic Object-Oriented Requirements System) Rational database experience
    Preferred DXL (DOORS eXtension Language) Code experience
    Prefer RPE (Rational Publishing Engine) experience
    Required Intermediate Proficiency - Word, Excel and PowerPoint

    Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.
    Additionally.. Must have a BS in engineering, computer science, mathematics, or physics. Aerospace experience is desired, but not required.
     
    Job Number: SystEngPA
    Job Location: Ridley Park, PA
    Rate: OPEN
    Per Diem: YES
    Overtime: Possible
    Duration: 4+ months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INNOVA SOLUTIONS, INC
    Attention: Janice Plattner
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.innovasolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Systems Engineer IV (PA)

    Description:
    Applies an interdisciplinary, collaborative approach to plan, design, develop and verify complex lifecycle balanced system of systems and system solutions. Evaluates customer/operational needs to define and coordinate system performance requirements, integrate technical parameters and assure compatibility of all physical, functional and program interfaces. Performs various analyses to optimize total system of systems and/or system architecture. Performs analyses for affordability, safety, reliability, maintainability, testability, human systems integration, survivability, vulnerability, susceptibility, system security, regulatory, certification, product assurance and other specialties quality factors into a preferred configuration to ensure mission success. Develops, maintains and identifies improvements for the planning, organization, implementation and monitoring of requirements management processes, tools, risk, issues, opportunity management and technology readiness assessment processes. Resolves cross-functional technical issues.

    Additionally...
    Prefer candidates to have product knowledge and technical acumen in developing and analyzing rotorcraft systems for safety and airworthiness in accordance with the specific customer operational and maintenance context (preferably military).
    Knowledge and experience in developing and conducting a compliant safety management program in accordance government and industry standards to include MIL-STD-882, SAE ARP 4761 and SAE ARP 4754, DO-178B, DO-254 and Def Stan 00-56.
    Working knowledge and experience developing Safety Management Plans and applying aviation related system safety analysis methods to include System Safety Risk Assessments, Fault-tree Analysis (FTA), Master Minimum Equipment List (MMEL) development, Functional Hazard Assessment ( FHA), Operation & Support Hazard Analysis (O&SHA) Safety Assessment Report (SAR), and Software Safety Assessment Report.

    Engineering, or related engineering degree from an ABET accredited school is highly desirable.

    Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering. Additionally...Engineering, or related engineering degree from an ABET accredited school is highly desirable.
     
    Job Number: SystEngPA
    Job Location: Ridley Park, PA
    Rate: up to $60/hour
    Per Diem: YES
    Overtime: Possible
    Duration: 6+ Months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INNOVA SOLUTIONS, INC
    Attention: Janice Plattner
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.innovasolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Systems Engineer TX

    Description:
    1061
    Job Title: Systems Engineer
    Location: Fort Worth, TX
    Compensation: 70-75/hr
    Assignment Length: 12 month contract
    No clearance
    Non-exempt
    9/80


    Description
    • During the Development Phase, the candidate will assist on site in completing and optimizing the secure development environment.
    • This activity will include improvements to make the environment routinely sustainable and user-friendly. This will include establishing appropriate monitoring protocols and rhythm for the SIEM .
    • The candidate will serve as a system administrator, modifying permissions, adjusting firewall or server configurations/rules, assist with internal policy and procedure development, and provision new VMs as required.
    • The candidate will recommend and implement improvements to the environment to sustain a consistent manageable platform for developers to build, test, release, and maintain their code.
    • ensure the environment is operational for users to build, test, release, and maintain their code.
    • The candidate will maintain firewall, network switches, development tools (license administration) within the development environment.
    • As part of the sustainment, the environment must be well documented, to include tracking of changes to the environment and vulnerability reports.
    • The expectation for this position is that it will be full time during normal business hours, but emergency support can occasionally be required outside of normal working hours.

    Skill/Experience/Education
    Mandatory:
    • LogRhythm SIEM (Secure Incident and Event Management)
    • VMWare Vsphere Hypervisor and VCenter management.
    • Centos 6 and 7 Linux for service and development engines
    • Software Technology: Aldec PL, Univa GridEngine, Jenkins Continuous Integration, SmartBear’s Code Collaborator, Collabnet’s TeamForge.
    • Networking Appliances: Dell Sonicwall firewall, Dell and Brocade switches with configured VLANS

    Skill Matrix
    Skill Name Description Level (1-5, 5 being the highest)
    1 2 3 4 5 Years Mandatory(Yes/No)
    • LogRhythm SIEM (Secure Incident and Event Management) 4-5 Years Yes
    • VMWare Vsphere Hypervisor and VCenter management. 4-5 Years Yes
    • Centos 6 and 7 Linux for service and development engines 4-5 Years Yes
    • Software Technology: Aldec PL, Univa GridEngine, Jenkins Continuous Integration, SmartBear’s Code Collaborator, Collabnet’s TeamForge. 4-5 Years Yes
    • Networking Appliances: Dell Sonicwall firewall, Dell and Brocade switches with configured VLANS 4-5 Years Yes
     
    Job Number: DW-1061
    Job Location: Fort Worth, TX
    Rate: 70-75/hr max
    Duration: 12 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Systems Engineer with active secret MD

    Description:
    Lockheed Martin Aero 0360
    Job Title: Systems Engineer
    Location: Patuxent River, MD 20760
    Compensation: 40-50/hr
    Assignment Length: 10 month contract
    Security Clearance Secret (Prime Contract:, Can start w/o clearance:No, Interim Clearance Sufficient:Yes)
    Non exempt
    1st shift

    Description:

    A highly motivated Mechanical Engineer seeking an opportunity to support the JSF CV and STOVL flight test programs at NAS Patuxent River MD as part of the Utilities and Subsystems (U&S) organization within the area of aircraft Hydraulics (HYD) and Landing Gear and Arrestments Systems (LAGs), Fuel Systems (FUEL), Power Thermal Management System (PTMS) or Electrical Power Systems (EPS).

    This position will require the candidate to train such that they can provide: test-planning, real-time control room monitoring, flight test data request, post flight data reduction & analysis, and on-aircraft troubleshooting of the subsystems of the JSF aircraft.

    Once trained in the primary discipline control room support, the candidate is expected to learn to troubleshoot these systems in the event of failures.

    It is expected that the candidate has the ability to learn continuously to expand aircraft system knowledge while working in a fast pace flight test environment.

    The candidate should be willing to support some evening and weekends in support of test activities and aircraft troubleshooting.

    The candidate must be willing to relocate to NAS Patuxent River, MD.

    Skill/Experience/Education
    Mandatory:

    - Mechanical or Aero Engineering Experience

    - Willingness to support occasional evening and weekend aircraft activities

    - possesses interim secret clearance

    Desired:

    - Experience with aircraft Hydraulic systems (HYD)

    - Experience with aircraft Landing Gear and Arrestment systems (LAGs)

    - Experience with aircraft Power Thermal Management Systems (PTMS)

    - Experience with aircraft Electrical Power Systems (EPS)

    - Experience with aircraft Fuel Systems (FUEL)

    - Previous lab test or aircraft flight test experience including: real-time data monitoring, flight test data requests and post-test data reduction and analysis

    - Experience with root cause analysis/investigation

    - Ability to develop on-aircraft troubleshooting plans utilizing hardware, software, and interface documentation and communicate them effectively to maintenance personnel

    - Software experience with: MS Office, Programming in C++, MATLAB, IADs, FireSpy IEEE 1394 Bus Analyzer and/or JEDI

    Skill Matrix
    Skill Name Description Level (1-5, 5 being the highest)
    1 2 3 4 5 Years Mandatory(Yes/No)
    Mechanical/Aero Engineering 4-5 Years No
     
    Job Number: SW-0360
    Job Location: Patuxent River, MD
    Rate: 40-50/hr DOE
    Duration: 10 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Systems Safety Engineer

    Description:
    Systems Safety Engineer-Tech Spec 1
    Savannah, GA
    Rate: $50-$54
    Unique Skills:

    Applicant must have and be able to demonstrate thorough knowledge of aerospace safety analyses including but not limited to performance of aircraft and system safety assessments in accordance with SAE ARP 4761. Knowledge of ARP 4754A is desirable. Applicant needs to know how to perform a functional hazard assessment (FHA), system safety assessment (SSA) and particular risk assessment (PRA) from initial requirement through requirement validation. Be very familiar with reliability calculations and fault tree analysis. Familiarity with fault tree software is preferred, experience with CAFTA is preferred.


    Education and Experience Requirements:

    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

    Position Purpose:

    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

    Principal Duties and Responsibilities:

    Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

    Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 6314
    Job Location: Savannah, GA
    Rate: $50-$54
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Cathy O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Systems Safety Tech Spec I

    Description:
    UNIQUE SKILLS
    Applicant must have and be able to demonstrate thorough knowledge of aerospace safety analyses including but not limited to performance of aircraft and system safety assessments in accordance with SAE ARP 4761. Knowledge of ARP 4754A is desirable. Applicant needs to know how to perform a functional hazard assessment (FHA), system safety assessment (SSA) and particular risk assessment (PRA) from initial requirement through requirement validation. Be very familiar with reliability calculations and fault tree analysis. Familiarity with fault tree software is preferred, experience with CAFTA is preferred.

    EDUCATION AND EXPERIENCE REQUIREMENTS
    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in specific technical discipline or 10 yrs. broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters, 4 yrs. for PhD in fields applicable to this job.

    POSITION PURPOSE
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

    PRINCIPAL DUTIES AND RESPONSIBILITIES
    ESSENTIAL FUNCTIONS
    1. Contributes to planning, developing and coordinating of important engineering projects
    2. Provides specialized technical assistance to team members
    3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    4. Determines and develops own approach to solutions within schedule and cost objectives
    5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
    6. Acts as liaison with representatives outside of the assigned group/area

    ADDITIONAL FUNCTIONS
    1. Actively works to improve daily processes and ensures all work meets customer requirements
    2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
    3. Performs other duties as assigned

    OTHER REQUIREMENTS
    1. Advanced degree in engineering related field preferred
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 16-589-75401
    Job Location: Southeast
    Rate: $50.00 to $54.00/per hr.
    Per Diem: Split
    Overtime: Possible
    Duration: 6 mths +
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Systems Software Engineer

    Description:
    Software Systems Engineer
    URGENT REQUIREMENT/NEED!
    The program is International Traffic in Arms Regulations (ITAR) controlled. U.S. Citizen required.
    Experience in software development and avionics systems engineering (development, analysis, test design, system architecture, etc.). Has performed predefined software and system design, development, verification, and integration activities.
    Capabilities
    - Performs the systems and software development activities with minimal oversight
    o Design activities including requirements capture, conceptual design (block diagram) and implementation.
    o Verification activities including test definition, test execution, and review of design life cycle artifacts.
    o Integration activities including the integration and troubleshooting of electrical designs in a lab environment.
    - Contributes to detailed discussions concerning systems and software requirements, architecture, and test strategy decisions.
    - Demonstrates a refined knowledge of software and systems design concepts, practices, and procedures and has developed specific areas of expertise.
    - Performs required activities according to department procedures, but demonstrates the insight necessary to suggest improvements based on the situation.
    - Exercises independent judgment and attempts to address issues prior to seeking guidance from senior staff members.
    - Exhibits a general understanding of industry related guidelines and uses that knowledge when performing activities.
    - Consistently performs tasks within accepted schedule.
    - Able to address customer technical issues within the technical bounds of the program.
    - Refers situations to supervisor when existing guidelines do not apply.
    - Takes initiative in determining and implementing appropriate procedures.
    - Develop designs that simplify and optimize HMI for the User.
    Activities
    Authoring/Validating/Updating Systems Test Cases and Procedures.
    - Writing, but mostly updating, test applications (e.g. Linux bash scripting, Linux/Windows Python, Windows batch scripting and command line, etc.).
    - Execute System test procedures, archive artifacts and record results.
    - Document generation and release.
    - Activities within DOORS are basic data entry and linking.
    - No DOORS DXL scripting or DOORS database management skills are necessary.
    - Report progress and estimate remaining effort.
     
    Job Number: WW010617AST
    Job Location: MILWAUKEE, WI
    Rate: DOE
    Per Diem: YES
    Overtime: YES
    Duration: 1 YEAR
    Start Date: JAN 23, 2017
    Input Date: 11/14/2020
    Firm Name: ENEA SOFTWARE AND SERVICES
    Attention: Walter Walonoski
    Address: 2555 E CAMELBACK RD STE 280
    City, State: PHOENIX, AZ 85016
    Phone: 480/753-9200
    Fax Phone: 480/753-6400
    Website: www.enea.com/services/expertise

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Systems/Safety Engineers

    Description:
    Must have real experience with SYSTEM SAFETY
    Prefer candidates to have product knowledge and technical acumen in developing and analyzing rotorcraft systems for safety and airworthiness in accordance with the specific customer operational and maintenance context (preferably military).
    _System Safety Risk Assessments
    _Fault-tree Analysis (FTA)
    _Master Minimum Equipment List (MMEL) development
    _Functional Hazard Assessment ( FHA)
    _Operation & Support Hazard Analysis (O&SHA)
    _Safety Assessment Report (SAR)
    _Software Safety Assessment Report.
     
    Job Number: BO=PA-Safety
    Job Location: Ridley Park, PA
    Rate: $60.00/hour
    Per Diem: Possible
    Overtime: Possible
    Duration: 6 Months+
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PDS TECH COMMERCIAL, INC
    Attention: Mary Ann McCarthy
    Address: 1215 FERN RIDGE PKWY STE 231
    City, State: ST LOUIS, MO 63141
    Phone: 314/628-9143
    800 Phone: 800/472-3737
    Fax Phone: 314/628-9485
    Website: www.pdstech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Technical Service Librarian - 3 CA

    Description:
    Technical Service Librarian - 3 (Job Number: 16027697)

    Number of Openings: 1

    Location(s): United States-California-Manhattan Beach


    Shift: 1st Shift

    Target Start Date: Dec 5, 2016

    Pay Rate: $40 to $45/hr

    Work Schedule: 9/80

    Duration of Assignment: Up to 1 year

    Position Summary / Responsibilities
    Determines types of technical literature searches and sources of information to satisfy the scientific information needs of researchers and staff within the company. Conducts searches of technical literature, analyzes and evaluates data, extracts pertinent information, prepares information abstracts and bibliographies of material searched. Maintains extensive knowledge of literature resources and continuous contacts with local, national, and international information centers and agencies. Maintains and improves information retrieval capabilities. Assists in the selection of literature for inclusion in the library's collection and may translate foreign technical literature. Keeps abreast of developments in areas of interest to the company and periodically consults with researchers and other information users to ensure maximum usefulness and service.


    Basic Qualifications:

    · Associate of Science Degree in Information Technology, Engineering, or a related technical discipline plus 6 years of experience.
    · 6,000+ hours in the use of PTC Creo version 2 (or higher) and Intralink version 10 (or higher)
    · Experience in change control procedures and processes
    · Experience with Microsoft Office software 2010
    · Solid interpersonal and communication skills
    · Good organizational and problem solving skills with an ability to adapt quickly to changing requirements


    Preferred Qualifications:

    · Knowledge and some design experience of electronic parts and assemblies
    · Knowledge of government project and business rhythms
    · Experience with Cadence Virtuoso version 5.1 (or higher)
     
    Job Number: MB-16027697
    Job Location: Manhattan Beach, CA
    Rate: 45/hr max
    Duration: 12 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Technical Writer

    Description:
    Technical Writer
    UNIQUE SKILLS 1. Candidate should have extensive experience developing new and making revisions to Instructions for Continued Airworthiness (ICA) procedures. Experience should include, but not limited to, on-aircraft field level maintenance and inspection procedures, wire diagram and/or standard wire practice manual content from supplier and engineering data 2. Experience with ENOVIA SmarTeam or similar Product Lifecycle Management (PLM) database products strong desire 3. Familiarization with CATIA three-dimensional (3D) modeling and two-dimensional (2D) CAD standards, format, and 3D/2D software products 4. 'Hands-on' experience or working knowledge of aircraft inspection programs, aviation regulations, aircraft system content organization and OEM technical manuals development preferred, as a minimum candidate should possess knowledge of the MSG-3 Maintenance Program and ISC Sustaining process 5. Experience with aircraft technical manual content organization and authoring using S1000D spec and SNS, or recent experience of the same using iSpec standards required 6. Familiarization with Electrical Wiring Interconnection System (EWIS) best practices, applicable CFRs and development of related maintenance procedures desired 7. Accustom to working in a fast paced project environment and able to work overtime as required to meet deadlines 8. Understanding of and practical experience with Simplified Technical English, Spec ASD-STE100 and use of STE validation software desired 9. Mentor Graphics Capital Harness Systems (CHS) knowledge a plus

    Education and Experience Requirements:
    Bachelors degree or equivalent experience in the authoring of technical publications. Four (4) years of Technical Publications writing experience. Advanced knowledge of all aircraft systems methodology.
    Responsible (either individually or with other team members) for the writing of major portions of technical publications. Supports the complete workflow process to ensure successful completion of each revision cycle and distribution of technical publications. Complies with established quality processes to ensure accuracy, ease of use and timely delivery of each revision cycle content.

    Principal Duties and Responsibilities:

    Essential Functions: 1. Write technical publications content as directed. 2. Conduct reviews and analyze technical documents to gain a thorough understanding of how complex systems operate and how they are to be integrated into technical manuals to provide the end user with the level of text and graphics to support the efficient return to service of the aircraft system. 3. Consult with internal, external customers and Engineering to create/revise technical manuals to support the department/corporate operating priorities. 4. Provide input to management on new processes or technology for integration into the technical publications business model. 5. Assist in developing solutions for overcoming the technology/technical issues introduced by outside suppliers for incorporation into existing manuals. 6. Work with management, other departments, and team members in the development of specific project data. 7. Provide liaison with Completion Center, Technical Operations, Production and/or Completion Engineering, Service Center to obtain the necessary approval for technical information prior to its release to customers. 8. Participate with publications team to ensure all internal department workflows and business processes are followed for issues relating to producing and delivering technical publications and associated Computerized Maintenance Program (CMP) data. 9. Work with internal/external customers in the development of specific project requirements of source data to ensure a seamless incorporation of new data in the publications environment.


    Other Requirements: 1. At least three (3) years of Standard Graphic Markup Language (SGML) or SGML-related software applications 2. Strong technical writing and communication skills are required. 3. Ability to read and interpret blueprint and Engineering Orders. 4. Must have a thorough knowledge of aircraft tools, test equipment, vendor coding, parts nomenclature, maintenance procedures, and of aircraft equipment and maintenance.
     
    Job Location: Savannah, GA
    Rate: Open
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INNOVA SOLUTIONS, INC
    Attention: Andrew Walbert
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.innovasolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Technical Writer

    Description:
    1. Candidate should have extensive experience developing new and making revisions to Instructions for Continued Airworthiness (ICA) procedures to include but not limited to maintenance and inspection procedures, structure repair, fault isolation, wire diagram and/or parts catalogs from supplier and engineering data 2. Experience with ENOVIA SmarTeam or similar Product Lifecycle Management (PLM) database products strong desire 3. Familiarization with CATIA three-dimensional (3D) modeling and two-dimensional (2D) CAD standards, format, and 3D/2D software products 4. 'Hands-on' experience or working knowledge of aircraft inspection programs, aviation regulations, aircraft system content organization and OEM technical manuals development preferred, as a minimum candidate should possess knowledge of the MSG-3 Maintenance Program and ISC Sustaining process 5. Experience with aircraft technical manual content organization and authoring using S1000D spec and SNS, or recent experience of the same using iSpec standards required 6. Familiarization with Electrical Wiring Interconnection System (EWIS) best practices, applicable CFRs and development of related maintenance procedures desired 7. Accustom to working in a fast paced project environment and able to work overtime as required to meet deadlines 8. Understanding of and practical experience with Simplified Technical English, Spec ASD-STE100 and use of STE validation software desired 9. Mentor Graphics Capital Harness Systems (CHS) knowledge a plus

    Education and Experience Requirements:
    Bachelors degree or equivalent experience in the authoring of technical publications. Four (4) years of Technical Publications writing experience. Advanced knowledge of all aircraft systems methodology. See Other Requirements in Job Description.

    Position Purpose:
    Responsible (either individually or with other team members) for the writing of major portions of technical publications. Supports the complete workflow process to ensure successful completion of each revision cycle and distribution of technical publications. Complies with established quality processes to ensure accuracy, ease of use and timely delivery of each revision cycle content.

    Principal Duties and Responsibilities:

    Essential Functions: 1. Write technical publications content as directed. 2. Conduct reviews and analyze technical documents to gain a thorough understanding of how complex systems operate and how they are to be integrated into technical manuals to provide the end user with the level of text and graphics to support the efficient return to service of the aircraft system. 3. Consult with internal, external customers and Engineering to create/revise technical manuals to support the department/corporate operating priorities. 4. Provide input to management on new processes or technology for integration into the technical publications business model. 5. Assist in developing solutions for overcoming the technology/technical issues introduced by outside suppliers for incorporation into existing manuals. 6. Work with management, other departments, and team members in the development of specific project data. 7. Provide liaison with Completion Center, Technical Operations, Production and/or Completion Engineering, Service Center to obtain the necessary approval for technical information prior to its release to customers. 8. Participate with publications team to ensure all internal department workflows and business processes are followed for issues relating to producing and delivering technical publications and associated Computerized Maintenance Program (CMP) data. 9. Work with internal/external customers in the development of specific project requirements of source data to ensure a seamless incorporation of new data in the publications environment. .

    Other Requirements: 1. At least three (3) years of Standard Graphic Markup Language (SGML) or SGML-related software applications 2. Strong technical writing and communication skills are required. 3. Ability to read and interpret blueprint and Engineering Orders. 4. Must have a thorough knowledge of aircraft tools, test equipment, vendor coding, parts nomenclature, maintenance procedures, and of aircraft equipment and maintenance.
     
    Job Location: Savannah, GA
    Rate: Open
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INNOVA SOLUTIONS, INC
    Attention: Andrew Walbert
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.innovasolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Test Engineer

    Description:
    Develop the test capability for a Unit Under Test (UUT). This job will entail analyzing a test requirement, UUT schematics, reviewing legacy test designs, developing a test concept for hardware and software followed by a concept review, then developing a detailed hardware design where the Interface Test Adapter (ITA) and cables will be designed. A Printed Wiring Board (PWB) may need to be designed to go inside the ITA. Tolerance analysis will be required to verify test equipment can meet test requirement accuracy. Engineer will write a validation plan detailing how the design meets the test requirements. A Hardware Implementation Review will be held to ensure design completeness and that proper engineering principles were followed.

    Test engineer needs to be a self starter who is highly motivated and able to initiate contact with other disciplines to get the job done. Contributes to the completion of specific programs and projects. Frequent inter-organizational and outside customer contacts. Represents the organization in providing solutions to difficult technical issues associated with specific projects. Provides technical solutions to a wide range of difficult problems. Solutions are imaginative, thorough, and practicable, and consistent with organization objectives.


    Mandatory Skills:
    Bachelors degree from an accredited college in a related discipline. Minimum 10 years of engineering experience. Requires experience in designing Interface Test Adapters (ITAs), test station and ITA schematic design and layout . Design of Printed Wiring Boards (PWB). Must be a U.S. Citizen.


    Desired Skills:
    Flight hardware (i.e. the product) design. High-speed communication. Troubleshooting flight hardware. Programming in National Instruments TestStand, LabWindows/CVI and Labview FPGA.
     
    Job Number: MFC-REQ-1258
    Job Location: Orlando, FL
    Rate: $60 per hour
    Per Diem: NO
    Overtime: Yes
    Duration: 12+ Months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: YOH SERVICES
    Attention: Jess McKeown
    Address: STE 100
    11960 WESTLINE INDUSTRIAL DR

    City, State: ST LOUIS, MO 63146-3212
    Phone: 314/791-1565
    800 Phone: 800/298-0666
    Website: jobs.yoh.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Test Engineer

    Description:
    Test Engineer

    Location: Owego, NY
    Pay Rate: $25/hr - $29.80/hr (DOE)
    Duration: 1 Year Contract
    Schedule: 9/80
    Secret Clearance: (Prime Contract: Can start w/o clearance: Yes; Interim Clearance Sufficient: Yes)
    *Must be a U.S. Citizen*

    **This is primarily a first shift position. However, any candidate submitted should on occasion and driven by business needs plan for working an off shift or alternate schedule which could contain 2nd or 3rd shift hours and/or weekend work**

    Job Description:
    Specific duties will include:
    -test procedure development;
    -test planning and preparation;
    -test procedure execution;
    -coordinate system resources to support testing;
    -support test development, integration, and anomaly resolution as required;
    -support off-hours testing and associated projects as needed.
    -This role requires knowledge/experience with electronic circuits, automated test software, manufacturing processes, and the manufacturing test environment.
    -Additionally, the ability to interpret test requirements, implement requirement based test methodologies, and utilize statistical data analysis is required.
    -Personal characteristics must include flexibility, adaptability, a self-starter requiring minimal direct supervision, able to work both individually and as part of a team, and able to interact and work well with Company employees and internal customers
    -An eye test is required and is a condition of this offer

    Mandatory Skills:
    Experience with:
    -test procedure development;
    -test planning and preparation;
    -test procedure execution;
    ** This role requires knowledge/experience with electronic circuits, automated test software, manufacturing processes, and the manufacturing test environment. **
    -the ability to interpret test requirements, implement requirement based test methodologies, and utilize statistical data analysis is required.
    -Must also accept the schedule which on occasion includes off-shift (afternoon, nights, and weekends) scheduling to meet business needs.

    Education:
    Bachelors degree from an accredited college in a related discipline, or equivalent experience/combined education, with 2 years of professional experience; or no experience required with a related Masters degree. Considered experienced, but still a learner.
     
    Job Number: 6885
    Job Location: Owego, NY
    Rate: 25.00 - 29.80
    Per Diem: Possible
    Overtime: Possible
    Duration: 1 year
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Test Engineer Aerospace - Contract DY

    Description:
    Test Engineer Aerospace - Contract
    Ingenium is looking for a Test Engineer to work at a client’s facility in Dayton Ohio supporting test of development high speed rotating turbine type equipment. Contract.

    Must be a U.S. Citizenship or Lawful Permanent Resident. No Visa or Student Visa candidates considered.

    Additional Job Postings: http://www.ingeniumtech.com/tech_staffing/
    Responsibilities:
    Individual serving in this role will operate as a member of one of the new product test teams. The product will be a high speed, pneumatic driven air turbine device connected to a gearbox speed reducer. The general technical direction will be provided by the Staff/Lead test engineers assigned to the product. The role will be as a test supporting element that will be assigned specific test and/or test setup tasks in support of the objectives of the project team. It will be the responsibility of the person serving in this role to complete the required technical activities in compliance with the quality and deliverable requirements provided by the design team project leadership. It will also be the responsibility of this person to complete all necessary reports and documentation supporting the decision-making process necessary to complete the requested tasks.
    Desired Qualifications
    5 years of experience in testing and test evaluation
    Ability to understand complex engineering principles / situations / problems
    Ability to work with non-technical personnel on technical matters
    High electro-mechanical aptitude
    Experience working with reciprocating diesel engines and gas turbine engines and engine control
    Experience with engine maintenance
    Strong team player with willingness to pitch in and help out where needed
    Detail oriented
    Experience working with precision data transducers for both mechanical and electrical signal data
    acquisition
    Experience working with high speed rotating equipment
    Experience working with high pressure pneumatic and hydraulic systems
    Experience with LabView for both data acquisition and control applications
    Experience with Matlab and Microsoft Office tools
    Experience with high speed data acquisition software and hardware
    Experience with AC and DC motors, drives, and complex test arrangements

    Responsibilities
    Assist in creation and implement of test plans for turbine and power transmission subassemblies and complete starter assemblies both on-site and on customer site testing
    Assist technical personnel in all aspects of engineering test validation
    Make technical decisions by applications of specialized knowledge / skills
    Analyze data test results and assist in preparation of necessary summary documentation
    Perform and analyze basic and advanced testing and analysis as need to support design and development and test objectives
    Participate in recurring, cooperative test planning, and reporting activities
    Take direction from Design and Project Leads and the Test Group Leader
    Provide hands-on support to the technical teams through preparation and execution of test programs and test set-up and test execution
    Develop test plans with the engineering team to ensure proper validation of the components under test
    Perform assigned tasks including definition, approach, analysis, review, and implementation on schedule and within budget
    Develop and maintain appropriate test procedures, documentation, and training materials as is appropriate to support the operations of the testing areas
    Edit and support creation of LabVIEW programs to automate and monitor tests
    Support usage of, revision to, and general organization existing LabVIEW programs
    Assist in the general maintenance, upkeep, and improvement in the lab and its capabilities by ensuring that the systems and equipment are functioning properly
    Ensure proper safeguards are established and maintenance performed for all equipment required for purposes of testing and testing support
    Desired Software: LabVIEW experience required. Matlab
    Required Education & Experience:
    Bachelor’s Degree in Mechanical or Aerospace Engineering or any specialized equivalent from an accredited university or college preferred. Comparable experience in test of comparable equipment considered
    Position: Contract 12 months
    Location: Dayton Ohio

    Employment Criteria: U.S. Citizenship is required by law or government contract for this position. This position includes access or potential access to ITAR technical data. Therefore, candidates will need to qualify as a US Person which is defined as a US Citizen, a Permanent Resident who does not work for a foreign company/foreign government/foreign governmental agency or organization, or a political asylee in compliance with International Traffic in Arms Regulations.
    Employment Statement: Ingenium Technologies is an equal opportunity employer and does not discriminate on the basis of race, color, religion, sex, age, national origin, disability, veteran status, sexual orientation or any other classification protected by federal, state or local law. Proof of eligibility for employment will be required upon employment.
    Due to the requirements of the Customer, No Visa sponsorship is available.
     
    Job Number: 70071
    Job Location: Rockford, IL Illinois
    Rate: $38/hr.
    Per Diem: possible
    Overtime: possible
    Duration: 12 mos
    Start Date: 2 weeks
    Input Date: 11/14/2020
    Firm Name: INGENIUM TECHNOLOGY
    Attention: David Johnson
    Address: 4216 MARAY DR UNIT A1
    City, State: ROCKFORD, IL 61107
    Phone: 815/315-9273
    Fax Phone: 815/399-8804
    Website: www.ingeniumtech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Tool Design in Palmdale, CA #0258AS

    Description:
    Recruiter to contact: Adam Salazar
    Job title: Tool Design
    Location: Palmdale, CA
    Compensation: DOE
    Assignment Length: 12 month contract
    Security Clearance: Secret (Prime Contract:, Can start w/o clearance: No, Interim Clearance Sufficient: Yes) Non exempt
    1st shift

    Skill Matrix
    Skill Name Description Level (1-5, 5 being the highest)
    1 2 3 4 5 Years Mandatory(Yes/No)
    Tool Engineer 11 Years + Yes

    Description:
    • Candidate will be responsible for the design, maintenance, and repair of standard tools for the Palmdale site.

    • Responsible for working with Tool Design and Engineering personnel on producibility issues related to standard tools.

    • Individual must have knowledge of pneumatic tools, powerfeed motors, drilling, grinding, machining, and fastener installation.

    • Responsible for evaluating ergonomic tooling.

    • He/she will be required to create quick solutions to manufacturing problems and modify standard tools to fit unique area/program requirements.

    • Responsible for providing tools on startup programs to include cutting tools, motors, fastener installation tooling and gauging.

    Skill/Experience/Education
    Mandatory:
    Working knowledge of the Standard Tools which includes any of the following: sheet metal, assembly tooling, hand tools, machine shop tools, sheet metal fabrication tools, plumbing cable/electrical tooling, and quality control tooling.

    -Knowledge and experience with any of the following: pneumatic tools, powerfeed motors, drilling, grinding, machining, and fastener installation.

    -Experience with either of the following CAD Software programs: Catia, SolidWorks, Or Pro/E -Must be a US Citizen. This position is located at a facility that requires special access.

    Desired:
    Manufacturing Floor experience
    -Ability to design and apply tooling concepts to repair and modify aircraft assemblies.
    -Ability to think out of the box and modify standard tools to fit unique requirements.
     
    Job Number: #0258AS
    Job Location: Palmdale, CA
    Rate: DOE
    Duration: 12 Months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Adam Salazar
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Tool Design in Palmdale, CA #0258AS

    Description:
    Recruiter to contact: Adam Salazar
    Job title: Tool Design
    Location: Palmdale, CA
    Compensation: DOE
    Assignment Length: 12 month contract
    Security Clearance: Secret (Prime Contract:, Can start w/o clearance: No, Interim Clearance Sufficient: Yes) Non exempt
    1st shift

    Skill Matrix
    Skill Name Description Level (1-5, 5 being the highest)
    1 2 3 4 5 Years Mandatory(Yes/No)
    Tool Engineer 11 Years + Yes

    Description:
    • Candidate will be responsible for the design, maintenance, and repair of standard tools for the Palmdale site.

    • Responsible for working with Tool Design and Engineering personnel on producibility issues related to standard tools.

    • Individual must have knowledge of pneumatic tools, powerfeed motors, drilling, grinding, machining, and fastener installation.

    • Responsible for evaluating ergonomic tooling.

    • He/she will be required to create quick solutions to manufacturing problems and modify standard tools to fit unique area/program requirements.

    • Responsible for providing tools on startup programs to include cutting tools, motors, fastener installation tooling and gauging.

    Skill/Experience/Education
    Mandatory:
    Working knowledge of the Standard Tools which includes any of the following: sheet metal, assembly tooling, hand tools, machine shop tools, sheet metal fabrication tools, plumbing cable/electrical tooling, and quality control tooling.

    -Knowledge and experience with any of the following: pneumatic tools, powerfeed motors, drilling, grinding, machining, and fastener installation.

    -Experience with either of the following CAD Software programs: Catia, SolidWorks, Or Pro/E -Must be a US Citizen. This position is located at a facility that requires special access.

    Desired:
    Manufacturing Floor experience
    -Ability to design and apply tooling concepts to repair and modify aircraft assemblies.
    -Ability to think out of the box and modify standard tools to fit unique requirements.
     
    Job Number: #0258AS
    Job Location: Palmdale, CA
    Rate: DOE
    Duration: 12 Months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Adam Salazar
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Tool Design with active secret / Catia, SolidWorks, Or Pro/E CA

    Description:
    Lockheed Martin Aero 0258
    Job title: Tool Design
    Job Number: 158189
    Location: Palmdale, CA
    Compensation: 50-70/hr(DOE)
    Assignment Length: 12 month contract
    Security Clearance Secret (Prime Contract:, Can start w/o clearance:No, Interim Clearance Sufficient:Yes)
    Non exempt
    1st shift

    Description:

    Candidate will be responsible for the design, maintenance, and repair of standard tools for the Palmdale site. Responsible for working with Tool Design and Engineering personnel on producibility issues related to standard tools. Individual must have knowledge of pneumatic tools, powerfeed motors, drilling, grinding, machining, and fastener installation. Responsible for evaluating ergonomic tooling. He/she will be required to create quick solutions to manufacturing problems and modify standard tools to fit unique area/program requirements. Responsible for providing tools on startup programs to include cutting tools, motors, fastener installation tooling and gauging.

    Skill/Experience/Education
    Mandatory:

    Working knowledge of the Standard Tools which includes any of the following: sheet metal, assembly tooling, hand tools, machine shop tools, sheet metal fabrication tools, plumbing cable/electrical tooling, and quality control tooling. -Knowledge and experience with any of the following: pneumatic tools, powerfeed motors, drilling, grinding, machining, and fastener installation. -Experience with either of the following CAD Software programs: Catia, SolidWorks, Or Pro/E -Must be a US Citizen. This position is located at a facility that requires special access.
    Desired:

    Manufacturing Floor experience -Ability to design and apply tooling concepts to repair and modify aircraft assemblies. -Ability to think out of the box and modify standard tools to fit unique requirements.

    Skill Matrix
    Skill Name Description Level (1-5, 5 being the highest)
    1 2 3 4 5 Years Mandatory(Yes/No)
    Tool Engineer 11 Years + Yes
     
    Job Number: SW-0258
    Job Location: Palmdale, CA
    Rate: 50-70/hr DOE
    Duration: 12 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Tool Designer III

    Description:
    This position will be responsible for the development of conceptualized tooling solutions and creation of CAD models to support the tooling requirements for low pressure ECS ducting at an off-site location. The Tool Design Engineer III will utilize extensive knowledge and experience to plan and accomplish goals. The incumbent in this position will develop technical solutions to problems with a high level of complexity and will exercise considerable latitude in determining the technical objectives and methodology for the tooling. This will be accomplished working closely with a Manufacturing Engineer, employed by the customer. The Tool Design Engineer III will guide the successful completion of the designs and may function in a project leadership role. In addition, the Tool Design Engineer III may represent the organization as the prime technical contact for contracts and projects. This individual will work both independently as well as part of a team to complete specific projects related to the design and development of tooling solutions. Specific duties and responsibilities include but are not limited to the following:

    Essential Duties and Responsibilities:
    Responsible for the design of tooling to manufacture ECS ducting components and assembly fixtures.
    Evaluates requirements to develop tool concepts.
    Develops concepts for complex tools and can present alternative concepts.
    Ability to manipulate data sets such as conceptual tool design models and deliverable designs.
    Will create and modify tool designs.
    Participates in tool/equipment try-outs to ensure requirements have been satisfied.
    Evaluates and develops/revises preventative maintenance requirements for tools.
    Responds to requests for review and evaluates ability to produce proposed design with respect to forming, machining, and finishing by using in-house or supplier provided processes to support customer specifications.
    Assists in determining methodology for assembly of components and evaluates part-features required to support the proposed product.
    Investigates, develops, and verifies feasibility of tool concepts.
    Incorporates safety, ergonomic, and regulatory requirements in tool designs.
    Works well with minimal supervision.
    Performs other duties as required.

    Qualifications & Skills Requirements:
    Bachelor’s degree in a related engineering field is preferred and a minimum of 10+ years of tooling experience in the Aerospace Industry or related field or the equivalent in training, education and experience.
    Requires advanced knowledge of CATIA V5 CAD software as well as MS Office products.

    Physical Requirements: Individual must be able to sit for extended periods of time, working at a desk and/or attending meetings. May occasionally require employee to stand and/or walk and occasionally lift and/or move up to 10 pounds. Will need to be able to move throughout the office and talk/hear or otherwise communicate with other employees and management. Work will be performed in an office environment. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties of the job

    LMI Aerospace Engineering Services is an E-Verify EOE/Minorities/Females/Disability/Vets employer

    Click the link and follow instructions on HOW TO APPLY: LMI ENGINEERING JOB OPPORTUNITIES
     

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Tool Designers - Active Secret

    Description:
    **Must have Active Secret Clearance
    Experience with either of the following CAD Software programs: Catia, SolidWorks, Or Pro/E
    Candidate will be responsible for the design, maintenance, and repair of standard tools.
    Working knowledge of the Standard Tools which includes any of the following: sheet metal, assembly tooling, hand tools, machine shop tools, sheet metal fabrication tools, plumbing cable/electrical tooling, and quality control tooling.
     
    Job Number: Lock-CA
    Job Location: Palmdale, CA
    Rate: $50.00-$65.00/hour
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PDS TECH COMMERCIAL, INC
    Attention: Mary Ann McCarthy
    Address: 1215 FERN RIDGE PKWY STE 231
    City, State: ST LOUIS, MO 63141
    Phone: 314/628-9143
    800 Phone: 800/472-3737
    Fax Phone: 314/628-9485
    Website: www.pdstech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Wire Design & Install Engineer 4

    Description:
    MULTIPLE OPENINGS FOR 787 WIRE DESIGN!!!!

    Please call or email Holly Herrera at 253-455-3711 or hherrera@iconma.com.

    Wire Design & Install Engineer 4

    Location: North Charleston, SC
    Duration: 12 months

    Description:
    Develops and maintains cable/wire harness detail and assembly designs. Analyzes results and performs design reviews. Leads the team to analyze results and performs design reviews. Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Documents processes, specifications and procedures that support the design and manufacture of electrical commodities. Develops complex statements of work, metrics, schedules and budgets. Performs technical review of supplier capabilities to facilitate source selection. Works under minimal direction.

    Education / Experience:
    Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

    Skill Code:
    679-Electrical/Electronic Installa

    Additional Information:
    Software: CATIA V5, ENOVIA

    Skill set:
    Wire installation, equipment installation, part design, and project management skills.

    Skills
    Category Name Required Level
    Areas of Expertise Project Management Yes Advanced
    Software Skills CATIA V5 Yes Advanced
    Software Skills ENOVIA Yes Advanced
     
    Job Number: 24330-1
    Job Location: North Charleston, SC
    Rate: 60.00
    Per Diem: Yes
    Overtime: Possible
    Duration: 12 months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: ICONMA LLC
    Attention: Holly Herrera
    Address: 859 STEPHENSON HWY
    City, State: TROY, MI 48083
    Phone: 843/955-9221
    Website: www.iconma.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    software /I.T. Engineer - RM

    Description:
    Johnson Service Group is seeking a Software/IT Engineer for a 2 year contract opportunity in Trumbull, CT!

    No Corp to Corp or H1b sponsorship.

    Description:

    Candidate with skills and experience in software/I.T. architecture such as Map Reduce, Spark, Hadoop Distributed File System (HDFS), Python, Database (Oracle / SQL) and statistical analysis of aircraft data (including Health Usage Monitoring System ((HUMS)) are preferred.



    Candidate with advanced degree in Computer Science, Data/Science.



    Tasks:

    The Contractor shall gain access to all necessary data sources within The Customer�s environment, via systems/methods compliant with COMPANY policy.
    The Contractor shall aid in the identification of specific data residing in HDFS and/or other sources as required by The Customer. This may include locating data elements/sources, as well as understanding the definitions, characteristics, risks and limitations of this data.
    The Contractor shall aid in the extraction of data residing in HDFS and/or other sources as required by The Customer. This includes raw data extraction, as well as the extraction of �feature� data, which may require the Contractor to fuse multiple data types/elements/signals/sources.
    The Contractor shall aid in the manipulation and analysis of extracted data as required by The Customer. Manipulation may include the wrangling, aggregation and/or other conditioning of data for further analysis. Analysis may include data visualization, statistical investigation and/or other techniques.
    The Contractor shall automate all extractions, manipulations and analyses whenever possible, utilizing methods and tools (including scripting languages) agreed to by The Customer
    The Contractor shall store and make accessible the results of their efforts via approved methods. This includes extracted datasets and associated manipulations/analyses, as well as any scripts/code/tools created/modified to perform these actions.
     
    Job Number: 352702
    Job Location: Trumbull, CT
    Rate: Open
    Per Diem: yes
    Overtime: yes
    Duration: 2 year
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Richard Martinsen
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    Back to Advanced Job Search